diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecInfo.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecInfo.aidl
index 2ca9d96..2727d6e 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecInfo.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecInfo.aidl
@@ -49,7 +49,15 @@
     int outputDataPath = 1;
     boolean useControllerCodec = true;
   }
+  parcelable LeAudio {
+    android.hardware.bluetooth.audio.ChannelMode[] channelMode;
+    int[] samplingFrequencyHz;
+    int[] frameDurationUs;
+    int[] bitdepth;
+    @nullable android.hardware.bluetooth.audio.ConfigurationFlags flags;
+  }
   union Transport {
+    android.hardware.bluetooth.audio.CodecInfo.LeAudio leAudio;
     android.hardware.bluetooth.audio.CodecInfo.A2dp a2dp;
     android.hardware.bluetooth.audio.CodecInfo.Hfp hfp;
   }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecSpecificCapabilitiesLtv.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecSpecificCapabilitiesLtv.aidl
new file mode 100644
index 0000000..1049d98
--- /dev/null
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecSpecificCapabilitiesLtv.aidl
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.audio;
+@VintfStability
+union CodecSpecificCapabilitiesLtv {
+  android.hardware.bluetooth.audio.CodecSpecificCapabilitiesLtv.SupportedSamplingFrequencies supportedSamplingFrequencies;
+  android.hardware.bluetooth.audio.CodecSpecificCapabilitiesLtv.SupportedFrameDurations supportedFrameDurations;
+  android.hardware.bluetooth.audio.CodecSpecificCapabilitiesLtv.SupportedAudioChannelCounts supportedAudioChannelCounts;
+  android.hardware.bluetooth.audio.CodecSpecificCapabilitiesLtv.SupportedOctetsPerCodecFrame supportedOctetsPerCodecFrame;
+  android.hardware.bluetooth.audio.CodecSpecificCapabilitiesLtv.SupportedMaxCodecFramesPerSDU supportedMaxCodecFramesPerSDU;
+  parcelable SupportedSamplingFrequencies {
+    int bitmask;
+    const int HZ8000 = 0x0001;
+    const int HZ11025 = 0x0002;
+    const int HZ16000 = 0x0004;
+    const int HZ22050 = 0x0008;
+    const int HZ24000 = 0x0010;
+    const int HZ32000 = 0x0020;
+    const int HZ44100 = 0x0040;
+    const int HZ48000 = 0x0080;
+    const int HZ88200 = 0x0100;
+    const int HZ96000 = 0x0200;
+    const int HZ176400 = 0x0400;
+    const int HZ192000 = 0x0800;
+    const int HZ384000 = 0x1000;
+  }
+  parcelable SupportedFrameDurations {
+    int bitmask;
+    const int US7500 = 0x01;
+    const int US10000 = 0x02;
+    const int US7500PREFERRED = 0x10;
+    const int US10000PREFERRED = 0x20;
+  }
+  parcelable SupportedAudioChannelCounts {
+    int bitmask;
+    const int ONE = 0x01;
+    const int TWO = 0x02;
+    const int THREE = 0x04;
+    const int FOUR = 0x08;
+    const int FIVE = 0x10;
+    const int SIX = 0x20;
+    const int SEVEN = 0x40;
+    const int EIGHT = 0x80;
+  }
+  parcelable SupportedOctetsPerCodecFrame {
+    int minimum;
+    int maximum;
+  }
+  parcelable SupportedMaxCodecFramesPerSDU {
+    int value;
+  }
+}
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecSpecificConfigurationLtv.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecSpecificConfigurationLtv.aidl
new file mode 100644
index 0000000..943d396
--- /dev/null
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/CodecSpecificConfigurationLtv.aidl
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.audio;
+@VintfStability
+union CodecSpecificConfigurationLtv {
+  android.hardware.bluetooth.audio.CodecSpecificConfigurationLtv.CodecFrameBlocksPerSDU codecFrameBlocksPerSDU;
+  android.hardware.bluetooth.audio.CodecSpecificConfigurationLtv.SamplingFrequency samplingFrequency;
+  android.hardware.bluetooth.audio.CodecSpecificConfigurationLtv.FrameDuration frameDuration;
+  android.hardware.bluetooth.audio.CodecSpecificConfigurationLtv.AudioChannelAllocation audioChannelAllocation;
+  android.hardware.bluetooth.audio.CodecSpecificConfigurationLtv.OctetsPerCodecFrame octetsPerCodecFrame;
+  @Backing(type="byte")
+  enum SamplingFrequency {
+    HZ8000 = 0x01,
+    HZ11025 = 0x02,
+    HZ16000 = 0x03,
+    HZ22050 = 0x04,
+    HZ24000 = 0x05,
+    HZ32000 = 0x06,
+    HZ44100 = 0x07,
+    HZ48000 = 0x08,
+    HZ88200 = 0x09,
+    HZ96000 = 0x0A,
+    HZ176400 = 0x0B,
+    HZ192000 = 0x0C,
+    HZ384000 = 0x0D,
+  }
+  @Backing(type="byte")
+  enum FrameDuration {
+    US7500 = 0x00,
+    US10000 = 0x01,
+  }
+  parcelable AudioChannelAllocation {
+    int bitmask;
+    const int NOT_ALLOWED = 0x00000000;
+    const int FRONT_LEFT = 0x00000001;
+    const int FRONT_RIGHT = 0x00000002;
+    const int FRONT_CENTER = 0x00000004;
+    const int LOW_FREQUENCY_EFFECTS_1 = 0x00000008;
+    const int BACK_LEFT = 0x00000010;
+    const int BACK_RIGHT = 0x00000020;
+    const int FRONT_LEFT_OF_CENTER = 0x00000040;
+    const int FRONT_RIGHT_OF_CENTER = 0x00000080;
+    const int BACK_CENTER = 0x00000100;
+    const int LOW_FREQUENCY_EFFECTS_2 = 0x00000200;
+    const int SIDE_LEFT = 0x00000400;
+    const int SIDE_RIGHT = 0x00000800;
+    const int TOP_FRONT_LEFT = 0x00001000;
+    const int TOP_FRONT_RIGHT = 0x00002000;
+    const int TOP_FRONT_CENTER = 0x00004000;
+    const int TOP_CENTER = 0x00008000;
+    const int TOP_BACK_LEFT = 0x00010000;
+    const int TOP_BACK_RIGHT = 0x00020000;
+    const int TOP_SIDE_LEFT = 0x00040000;
+    const int TOP_SIDE_RIGHT = 0x00080000;
+    const int TOP_BACK_CENTER = 0x00100000;
+    const int BOTTOM_FRONT_CENTER = 0x00200000;
+    const int BOTTOM_FRONT_LEFT = 0x00400000;
+    const int BOTTOM_FRONT_RIGHT = 0x00800000;
+    const int FRONT_LEFT_WIDE = 0x01000000;
+    const int FRONT_RIGHT_WIDE = 0x02000000;
+    const int LEFT_SURROUND = 0x04000000;
+    const int RIGHT_SURROUND = 0x08000000;
+  }
+  parcelable OctetsPerCodecFrame {
+    int value;
+  }
+  parcelable CodecFrameBlocksPerSDU {
+    int value;
+  }
+}
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/ConfigurationFlags.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/ConfigurationFlags.aidl
new file mode 100644
index 0000000..baf0a4e
--- /dev/null
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/ConfigurationFlags.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.audio;
+@VintfStability
+parcelable ConfigurationFlags {
+  int bitmask;
+  const int NONE = 0x0000;
+  const int LOSSLESS = 0x0001;
+  const int LOW_LATENCY = 0x0002;
+  const int ALLOW_ASYMMETRIC_CONFIGURATIONS = 0x0003;
+  const int SPATIAL_AUDIO = 0x0004;
+  const int PROVIDE_ASE_METADATA = 0x0005;
+  const int MONO_MIC_CONFIGURATION = 0x0006;
+}
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl
index ccf5524..788e38f 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl
@@ -42,4 +42,112 @@
   void setLowLatencyModeAllowed(in boolean allowed);
   android.hardware.bluetooth.audio.A2dpStatus parseA2dpConfiguration(in android.hardware.bluetooth.audio.CodecId codecId, in byte[] configuration, out android.hardware.bluetooth.audio.CodecParameters codecParameters);
   @nullable android.hardware.bluetooth.audio.A2dpConfiguration getA2dpConfiguration(in List<android.hardware.bluetooth.audio.A2dpRemoteCapabilities> remoteA2dpCapabilities, in android.hardware.bluetooth.audio.A2dpConfigurationHint hint);
+  void setCodecPriority(in android.hardware.bluetooth.audio.CodecId codecId, int priority);
+  List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseConfigurationSetting> getLeAudioAseConfiguration(in @nullable List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDeviceCapabilities> remoteSinkAudioCapabilities, in @nullable List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDeviceCapabilities> remoteSourceAudioCapabilities, in List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioConfigurationRequirement> requirements);
+  android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseQosConfigurationPair getLeAudioAseQosConfiguration(in android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseQosConfigurationRequirement qosRequirement);
+  android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDataPathConfigurationPair getLeAudioAseDatapathConfiguration(in android.hardware.bluetooth.audio.AudioContext context, in android.hardware.bluetooth.audio.LeAudioConfiguration.StreamMap[] streamMap);
+  void onSinkAseMetadataChanged(in android.hardware.bluetooth.audio.IBluetoothAudioProvider.AseState state, int cigId, int cisId, in @nullable android.hardware.bluetooth.audio.MetadataLtv[] metadata);
+  void onSourceAseMetadataChanged(in android.hardware.bluetooth.audio.IBluetoothAudioProvider.AseState state, int cigId, int cisId, in @nullable android.hardware.bluetooth.audio.MetadataLtv[] metadata);
+  @VintfStability
+  parcelable LeAudioDeviceCapabilities {
+    android.hardware.bluetooth.audio.CodecId codecId;
+    android.hardware.bluetooth.audio.CodecSpecificCapabilitiesLtv[] codecSpecificCapabilities;
+    @nullable byte[] vendorCodecSpecificCapabilities;
+    @nullable android.hardware.bluetooth.audio.MetadataLtv[] metadata;
+  }
+  @VintfStability
+  parcelable LeAudioDataPathConfiguration {
+    int dataPathId;
+    android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDataPathConfiguration.DataPathConfiguration dataPathConfiguration;
+    android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDataPathConfiguration.IsoDataPathConfiguration isoDataPathConfiguration;
+    @VintfStability
+    parcelable IsoDataPathConfiguration {
+      android.hardware.bluetooth.audio.CodecId codecId;
+      boolean isTransparent;
+      int controllerDelayUs;
+      @nullable byte[] configuration;
+    }
+    @VintfStability
+    parcelable DataPathConfiguration {
+      @nullable byte[] configuration;
+    }
+  }
+  @VintfStability
+  parcelable LeAudioAseQosConfiguration {
+    int sduIntervalUs;
+    android.hardware.bluetooth.audio.IBluetoothAudioProvider.Framing framing;
+    android.hardware.bluetooth.audio.Phy[] phy;
+    int maxTransportLatencyMs;
+    int maxSdu;
+    int retransmissionNum;
+  }
+  @Backing(type="byte") @VintfStability
+  enum Packing {
+    SEQUENTIAL = 0x00,
+    INTERLEAVED = 0x01,
+  }
+  @Backing(type="byte") @VintfStability
+  enum Framing {
+    UNFRAMED = 0x00,
+    FRAMED = 0x01,
+  }
+  @VintfStability
+  parcelable LeAudioAseConfigurationSetting {
+    android.hardware.bluetooth.audio.AudioContext audioContext;
+    android.hardware.bluetooth.audio.IBluetoothAudioProvider.Packing packing;
+    @nullable List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseConfigurationSetting.AseDirectionConfiguration> sinkAseConfiguration;
+    @nullable List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseConfigurationSetting.AseDirectionConfiguration> sourceAseConfiguration;
+    @nullable android.hardware.bluetooth.audio.ConfigurationFlags flags;
+    @VintfStability
+    parcelable AseDirectionConfiguration {
+      android.hardware.bluetooth.audio.LeAudioAseConfiguration aseConfiguration;
+      @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseQosConfiguration qosConfiguration;
+      @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDataPathConfiguration dataPathConfiguration;
+    }
+  }
+  @VintfStability
+  parcelable LeAudioConfigurationRequirement {
+    android.hardware.bluetooth.audio.AudioContext audioContext;
+    @nullable List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioConfigurationRequirement.AseDirectionRequirement> sinkAseRequirement;
+    @nullable List<android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioConfigurationRequirement.AseDirectionRequirement> sourceAseRequirement;
+    @nullable android.hardware.bluetooth.audio.ConfigurationFlags flags;
+    @VintfStability
+    parcelable AseDirectionRequirement {
+      android.hardware.bluetooth.audio.LeAudioAseConfiguration aseConfiguration;
+    }
+  }
+  @VintfStability
+  parcelable LeAudioAseQosConfigurationRequirement {
+    android.hardware.bluetooth.audio.AudioContext contextType;
+    @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseQosConfigurationRequirement.AseQosDirectionRequirement sinkAseQosRequirement;
+    @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseQosConfigurationRequirement.AseQosDirectionRequirement sourceAseQosRequirement;
+    @nullable android.hardware.bluetooth.audio.ConfigurationFlags[] flags;
+    @VintfStability
+    parcelable AseQosDirectionRequirement {
+      android.hardware.bluetooth.audio.IBluetoothAudioProvider.Framing framing;
+      android.hardware.bluetooth.audio.Phy[] preferredPhy;
+      int preferredRetransmissionNum;
+      int maxTransportLatencyMs;
+      int presentationDelayMinUs;
+      int presentationDelayMaxUs;
+      int preferredPresentationDelayMinUs;
+      int preferredPresentationDelayMaxUs;
+      android.hardware.bluetooth.audio.LeAudioAseConfiguration aseConfiguration;
+    }
+  }
+  @VintfStability
+  parcelable LeAudioAseQosConfigurationPair {
+    @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseQosConfiguration sinkQosConfiguration;
+    @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioAseQosConfiguration sourceQosConfiguration;
+  }
+  parcelable LeAudioDataPathConfigurationPair {
+    @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDataPathConfiguration inputConfig;
+    @nullable android.hardware.bluetooth.audio.IBluetoothAudioProvider.LeAudioDataPathConfiguration outputConfig;
+  }
+  @Backing(type="byte") @VintfStability
+  enum AseState {
+    ENABLING = 0x00,
+    STREAMING = 0x01,
+    DISABLING = 0x02,
+  }
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl
index c806b0a..edb79a3 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl
@@ -41,5 +41,6 @@
   parcelable ProviderInfo {
     String name;
     android.hardware.bluetooth.audio.CodecInfo[] codecInfos;
+    boolean supportsMultidirectionalCapabilities;
   }
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LeAudioAseConfiguration.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LeAudioAseConfiguration.aidl
new file mode 100644
index 0000000..bffc88b
--- /dev/null
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LeAudioAseConfiguration.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.audio;
+@VintfStability
+parcelable LeAudioAseConfiguration {
+  android.hardware.bluetooth.audio.LeAudioAseConfiguration.TargetLatency targetLatency;
+  android.hardware.bluetooth.audio.Phy targetPhy;
+  @nullable android.hardware.bluetooth.audio.CodecId codecId;
+  android.hardware.bluetooth.audio.CodecSpecificConfigurationLtv[] codecConfiguration;
+  @nullable byte[] vendorCodecConfiguration;
+  @nullable android.hardware.bluetooth.audio.MetadataLtv[] metadata;
+  @Backing(type="byte") @VintfStability
+  enum TargetLatency {
+    UNDEFINED = 0x00,
+    LOWER = 0x01,
+    BALANCED_LATENCY_RELIABILITY = 0x02,
+    HIGHER_RELIABILITY = 0x03,
+  }
+}
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl
index 2d9ebae..25a9797 100644
--- a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl
@@ -44,5 +44,16 @@
     char streamHandle;
     int audioChannelAllocation;
     boolean isStreamActive;
+    @nullable android.hardware.bluetooth.audio.LeAudioAseConfiguration aseConfiguration;
+    @nullable android.hardware.bluetooth.audio.ConfigurationFlags flags;
+    @nullable android.hardware.bluetooth.audio.LeAudioConfiguration.StreamMap.BluetoothDeviceAddress bluetoothDeviceAddress;
+    parcelable BluetoothDeviceAddress {
+      byte[6] deviceAddress;
+      android.hardware.bluetooth.audio.LeAudioConfiguration.StreamMap.BluetoothDeviceAddress.DeviceAddressType deviceAddressType;
+      enum DeviceAddressType {
+        BLE_ADDRESS_PUBLIC = 0x00,
+        BLE_ADDRESS_RANDOM = 0x01,
+      }
+    }
   }
 }
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/MetadataLtv.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/MetadataLtv.aidl
new file mode 100644
index 0000000..5e8a2ae
--- /dev/null
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/MetadataLtv.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.audio;
+@VintfStability
+union MetadataLtv {
+  android.hardware.bluetooth.audio.MetadataLtv.PreferredAudioContexts preferredAudioContexts;
+  android.hardware.bluetooth.audio.MetadataLtv.StreamingAudioContexts streamingAudioContexts;
+  android.hardware.bluetooth.audio.MetadataLtv.VendorSpecific vendorSpecific;
+  parcelable PreferredAudioContexts {
+    android.hardware.bluetooth.audio.AudioContext values;
+  }
+  parcelable StreamingAudioContexts {
+    android.hardware.bluetooth.audio.AudioContext values;
+  }
+  parcelable VendorSpecific {
+    int companyId;
+    byte[] opaqueValue;
+  }
+}
diff --git a/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/Phy.aidl b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/Phy.aidl
new file mode 100644
index 0000000..bfeabcd
--- /dev/null
+++ b/bluetooth/audio/aidl/aidl_api/android.hardware.bluetooth.audio/current/android/hardware/bluetooth/audio/Phy.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.bluetooth.audio;
+@Backing(type="byte") @VintfStability
+enum Phy {
+  UNDEFINED = 0x00,
+  ONE_M = 0x01,
+  TWO_M = 0x02,
+  CODED = 0x03,
+}
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecInfo.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecInfo.aidl
index 127cd7c..33f0c04 100644
--- a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecInfo.aidl
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecInfo.aidl
@@ -18,6 +18,7 @@
 
 import android.hardware.bluetooth.audio.ChannelMode;
 import android.hardware.bluetooth.audio.CodecId;
+import android.hardware.bluetooth.audio.ConfigurationFlags;
 
 /**
  * General information about a Codec
@@ -87,10 +88,46 @@
     }
 
     /**
+     * LE Audio Context
+     */
+    parcelable LeAudio {
+        /**
+         * Channel configuration: Mono, Dual-Mono or Stereo
+         */
+        ChannelMode[] channelMode;
+
+        /**
+         * Supported sampling frequencies, in Hz.
+         */
+        int[] samplingFrequencyHz;
+
+        /*
+         * FrameDuration in microseconds.
+         */
+        int[] frameDurationUs;
+
+        /**
+         * - Fixed point resolution, basically 16, 24 or 32 bits by samples.
+         *   The value 32 should be used for floating point representation.
+         *
+         * When the bitdepth is not an encoding/decoding parameter (don't take
+         * part in the interoperability), the `bitdepth` list shall have a
+         * single element indicating the bitdepth selected for the platform.
+         */
+        int[] bitdepth;
+
+        /**
+         * Additional configuration flags
+         */
+        @nullable ConfigurationFlags flags;
+    }
+
+    /**
      * Specific informations,
      * depending on transport.
      */
     union Transport {
+        LeAudio leAudio;
         A2dp a2dp;
         Hfp hfp;
     }
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecSpecificCapabilitiesLtv.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecSpecificCapabilitiesLtv.aidl
new file mode 100644
index 0000000..ceb90ba
--- /dev/null
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecSpecificCapabilitiesLtv.aidl
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.audio;
+
+/**
+ * Used to exchange generic remote device codec specific capabilities between
+ * the stack and the provider. As defined in Bluetooth Assigned Numbers,
+ * Sec. 6.12.4.
+ */
+@VintfStability
+union CodecSpecificCapabilitiesLtv {
+    parcelable SupportedSamplingFrequencies {
+        const int HZ8000 = 0x0001;
+        const int HZ11025 = 0x0002;
+        const int HZ16000 = 0x0004;
+        const int HZ22050 = 0x0008;
+        const int HZ24000 = 0x0010;
+        const int HZ32000 = 0x0020;
+        const int HZ44100 = 0x0040;
+        const int HZ48000 = 0x0080;
+        const int HZ88200 = 0x0100;
+        const int HZ96000 = 0x0200;
+        const int HZ176400 = 0x0400;
+        const int HZ192000 = 0x0800;
+        const int HZ384000 = 0x1000;
+
+        /* 16 bits wide bit mask */
+        int bitmask;
+    }
+    parcelable SupportedFrameDurations {
+        const int US7500 = 0x01;
+        const int US10000 = 0x02;
+        // Bits 2-3 are RFU
+        const int US7500PREFERRED = 0x10;
+        const int US10000PREFERRED = 0x20;
+
+        /* 8 bit wide bit mask */
+        int bitmask;
+    }
+    parcelable SupportedAudioChannelCounts {
+        const int ONE = 0x01;
+        const int TWO = 0x02;
+        const int THREE = 0x04;
+        const int FOUR = 0x08;
+        const int FIVE = 0x10;
+        const int SIX = 0x20;
+        const int SEVEN = 0x40;
+        const int EIGHT = 0x80;
+
+        /* 8 bit wide bit mask */
+        int bitmask;
+    }
+    parcelable SupportedOctetsPerCodecFrame {
+        int minimum;
+        int maximum;
+    }
+    parcelable SupportedMaxCodecFramesPerSDU {
+        int value;
+    }
+
+    SupportedSamplingFrequencies supportedSamplingFrequencies;
+    SupportedFrameDurations supportedFrameDurations;
+    SupportedAudioChannelCounts supportedAudioChannelCounts;
+    SupportedOctetsPerCodecFrame supportedOctetsPerCodecFrame;
+    SupportedMaxCodecFramesPerSDU supportedMaxCodecFramesPerSDU;
+}
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecSpecificConfigurationLtv.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecSpecificConfigurationLtv.aidl
new file mode 100644
index 0000000..c099ebe
--- /dev/null
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/CodecSpecificConfigurationLtv.aidl
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.audio;
+
+/**
+ * Used to exchange generic remote device configuration between the stack and
+ * the provider. As defined in Bluetooth Assigned Numbers, Sec. 6.12.5.
+ */
+@VintfStability
+union CodecSpecificConfigurationLtv {
+    @Backing(type="byte")
+    enum SamplingFrequency {
+        HZ8000 = 0x01,
+        HZ11025 = 0x02,
+        HZ16000 = 0x03,
+        HZ22050 = 0x04,
+        HZ24000 = 0x05,
+        HZ32000 = 0x06,
+        HZ44100 = 0x07,
+        HZ48000 = 0x08,
+        HZ88200 = 0x09,
+        HZ96000 = 0x0A,
+        HZ176400 = 0x0B,
+        HZ192000 = 0x0C,
+        HZ384000 = 0x0D,
+    }
+
+    @Backing(type="byte")
+    enum FrameDuration {
+        US7500 = 0x00,
+        US10000 = 0x01,
+    }
+
+    parcelable AudioChannelAllocation {
+        const int NOT_ALLOWED = 0x00000000;
+        const int FRONT_LEFT = 0x00000001;
+        const int FRONT_RIGHT = 0x00000002;
+        const int FRONT_CENTER = 0x00000004;
+        const int LOW_FREQUENCY_EFFECTS_1 = 0x00000008;
+        const int BACK_LEFT = 0x00000010;
+        const int BACK_RIGHT = 0x00000020;
+        const int FRONT_LEFT_OF_CENTER = 0x00000040;
+        const int FRONT_RIGHT_OF_CENTER = 0x00000080;
+        const int BACK_CENTER = 0x00000100;
+        const int LOW_FREQUENCY_EFFECTS_2 = 0x00000200;
+        const int SIDE_LEFT = 0x00000400;
+        const int SIDE_RIGHT = 0x00000800;
+        const int TOP_FRONT_LEFT = 0x00001000;
+        const int TOP_FRONT_RIGHT = 0x00002000;
+        const int TOP_FRONT_CENTER = 0x00004000;
+        const int TOP_CENTER = 0x00008000;
+        const int TOP_BACK_LEFT = 0x00010000;
+        const int TOP_BACK_RIGHT = 0x00020000;
+        const int TOP_SIDE_LEFT = 0x00040000;
+        const int TOP_SIDE_RIGHT = 0x00080000;
+        const int TOP_BACK_CENTER = 0x00100000;
+        const int BOTTOM_FRONT_CENTER = 0x00200000;
+        const int BOTTOM_FRONT_LEFT = 0x00400000;
+        const int BOTTOM_FRONT_RIGHT = 0x00800000;
+        const int FRONT_LEFT_WIDE = 0x01000000;
+        const int FRONT_RIGHT_WIDE = 0x02000000;
+        const int LEFT_SURROUND = 0x04000000;
+        const int RIGHT_SURROUND = 0x08000000;
+
+        // Bit mask of Audio Locations
+        int bitmask;
+    }
+
+    parcelable OctetsPerCodecFrame {
+        int value;
+    }
+
+    parcelable CodecFrameBlocksPerSDU {
+        int value;
+    }
+
+    CodecFrameBlocksPerSDU codecFrameBlocksPerSDU;
+    SamplingFrequency samplingFrequency;
+    FrameDuration frameDuration;
+    AudioChannelAllocation audioChannelAllocation;
+    OctetsPerCodecFrame octetsPerCodecFrame;
+}
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/ConfigurationFlags.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/ConfigurationFlags.aidl
new file mode 100644
index 0000000..57c8be5
--- /dev/null
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/ConfigurationFlags.aidl
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.audio;
+
+/**
+ * Coding fetures
+ */
+@VintfStability
+parcelable ConfigurationFlags {
+    const int NONE = 0x0000;
+    /*
+     * Set for the lossless configurations
+     */
+    const int LOSSLESS = 0x0001;
+    /*
+     * Set for the low latency configurations
+     */
+    const int LOW_LATENCY = 0x0002;
+    /*
+     * When set, asymmetric configuration for SINK and SOURCE can be used.
+     * e.g. in GAMING mode stream for 32kHz and back channel for 16 kHz
+     */
+    const int ALLOW_ASYMMETRIC_CONFIGURATIONS = 0x0003;
+    /*
+     * Set for the spatial audio configurations
+     */
+    const int SPATIAL_AUDIO = 0x0004;
+    /*
+     * When set, BluetoothAudioProvider requests to receive ASE metadata.
+     * In such case onSinkAseMetadataChanged() and onSourceAseMetadataChanged
+     * will be called.
+     */
+    const int PROVIDE_ASE_METADATA = 0x0005;
+    /*
+     * Set for mono microphone configurations
+     */
+    const int MONO_MIC_CONFIGURATION = 0x0006;
+
+    int bitmask;
+}
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl
index b5c8a31..f565018 100644
--- a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProvider.aidl
@@ -21,11 +21,18 @@
 import android.hardware.bluetooth.audio.A2dpRemoteCapabilities;
 import android.hardware.bluetooth.audio.A2dpStatus;
 import android.hardware.bluetooth.audio.AudioConfiguration;
+import android.hardware.bluetooth.audio.AudioContext;
 import android.hardware.bluetooth.audio.BluetoothAudioStatus;
 import android.hardware.bluetooth.audio.CodecId;
 import android.hardware.bluetooth.audio.CodecParameters;
+import android.hardware.bluetooth.audio.CodecSpecificCapabilitiesLtv;
+import android.hardware.bluetooth.audio.ConfigurationFlags;
 import android.hardware.bluetooth.audio.IBluetoothAudioPort;
 import android.hardware.bluetooth.audio.LatencyMode;
+import android.hardware.bluetooth.audio.LeAudioAseConfiguration;
+import android.hardware.bluetooth.audio.LeAudioConfiguration.StreamMap;
+import android.hardware.bluetooth.audio.MetadataLtv;
+import android.hardware.bluetooth.audio.Phy;
 import android.hardware.common.fmq.MQDescriptor;
 import android.hardware.common.fmq.SynchronizedReadWrite;
 
@@ -124,4 +131,421 @@
      */
     @nullable A2dpConfiguration getA2dpConfiguration(
             in List<A2dpRemoteCapabilities> remoteA2dpCapabilities, in A2dpConfigurationHint hint);
+
+    /**
+     * Set specific codec priority
+     *
+     *  It should be assumed that the external module will start with all its
+     *  integrated codecs priority 0 by default.
+     *
+     * @param codecId:  codecId
+     * @param priority: 0 for no priority, -1 for codec disabled,
+     *                  from 1 to N, where 1 is highest.
+     */
+    void setCodecPriority(in CodecId codecId, int priority);
+
+    /**
+     * LE Audio device Capabilities - as defined in Bluetooth Published Audio
+     * Capabilities Service specification, v1.0.1, Sec. 3.1: "Sink PAC", and
+     * Sec. 3.3: "Source PAC".
+     */
+    @VintfStability
+    parcelable LeAudioDeviceCapabilities {
+        /**
+         * Codec Identifier
+         */
+        CodecId codecId;
+        /**
+         * Codec capabilities, packed as LTV.
+         */
+        CodecSpecificCapabilitiesLtv[] codecSpecificCapabilities;
+        /**
+         * Vendor codec specific capabilities.
+         *
+         * This will not be parsed by the BT stack, but passed to the vendor
+         * module who can interpret this and based on that select the proper
+         * vendor specific codec configuration.
+         */
+        @nullable byte[] vendorCodecSpecificCapabilities;
+        /**
+         * Audio capabilities metadata, packed as LTV.
+         */
+        @nullable MetadataLtv[] metadata;
+    }
+
+    @VintfStability
+    parcelable LeAudioDataPathConfiguration {
+        /**
+         * Vendor specific data path identifier
+         */
+        int dataPathId;
+
+        /**
+         * Used in the HCI_LE_Setup_ISO_Data_Path (0x006E).
+         * As defined in Bluetooth Core Specification Version
+         * 5.3, Vol 4, Part E, Sec. 7.8.109: "LE Setup ISO Data Path command".
+         */
+        @VintfStability
+        parcelable IsoDataPathConfiguration {
+            /**
+             * Codec ID - Valid Codec Identifier matching the selected codec
+             */
+            CodecId codecId;
+            /**
+             * Whether the transparent air mode should be set as a coding format
+             * in the HCI_LE_Setup_ISO_Data_Path command, indicating that the
+             * codec is not in the controller.
+             *
+             * If set to true, 0x03 (transparent air mode) will be used as a
+             * Codec_ID coding format and the `byte[] configuration` field shall
+             * remain empty. Otherwise the Codec_ID field will be set to
+             * according to BT specification (0xFF coding format, company ID,
+             * codec ID for vendor codecs, or according to Codec_ID identifiers
+             * defined in the Assigned Numbers for the non-vendor codecs).
+             */
+            boolean isTransparent;
+            /**
+             * Controller delay (in microseconds)
+             */
+            int controllerDelayUs;
+            /**
+             * Codec specific LE Audio ISO data path configuration
+             * must be null when codec ID is 0x03 transparent
+             */
+            @nullable byte[] configuration;
+        }
+
+        /**
+         * Used in HCI_Configure_Data_Path (0x0083)
+         * As defined in Bluetooth Core Specification Version
+         * 5.3, Vol 4, Part E, Sec. 7.3.101: "Configure Data Path command".
+         */
+        @VintfStability
+        parcelable DataPathConfiguration {
+            /**
+             * Vendor specific data path configuration
+             */
+            @nullable byte[] configuration;
+        }
+        /**
+         * Data path configuration
+         */
+        DataPathConfiguration dataPathConfiguration;
+        /**
+         * ISO data path configuration
+         */
+        IsoDataPathConfiguration isoDataPathConfiguration;
+    }
+
+    /* All the LeAudioAseQosConfiguration parameters are defined by the
+     * Bluetooth Audio Stream Control Service specification v.1.0, Sec. 5: "ASE
+     * Control Operations".
+     */
+    @VintfStability
+    parcelable LeAudioAseQosConfiguration {
+        /**
+         * SDU Interval (in microseconds) used in Set CIG Parameters command and
+         * Configure QoS.
+         */
+        int sduIntervalUs;
+        /**
+         * Framing used in Set CIG Parameters command and Configure QoS
+         */
+        Framing framing;
+        /**
+         * Phy used in Set CIG Parameters command and Configure QoS
+         */
+        Phy[] phy;
+        /**
+         * Max transport latency (in milliseconds) used in Set CIG Parameters
+         * command and Configure QoS.
+         */
+        int maxTransportLatencyMs;
+        /**
+         * Max SDU used in Set CIG Parameters command and Configure QoS
+         */
+        int maxSdu;
+        /**
+         * Retransmission number used in Set CIG Parameters command and
+         * Configure QoS
+         */
+        int retransmissionNum;
+    }
+
+    /**
+     * Connected Isochronous Channel arrangement within the Connected
+     * Isochronous Group. As defined in Bluetooth Core Specification Version
+     * 5.3, Vol 4, Part E, Sec. 7.8.97.
+     */
+    @VintfStability
+    @Backing(type="byte")
+    enum Packing {
+        SEQUENTIAL = 0x00,
+        INTERLEAVED = 0x01,
+    }
+
+    /**
+     * Isochronous Data PDU framing parameter. As defined in Bluetooth Core
+     * Specification Version 5.3, Vol 4, Part E, Sec. 7.8.97.
+     */
+    @VintfStability
+    @Backing(type="byte")
+    enum Framing {
+        UNFRAMED = 0x00,
+        FRAMED = 0x01,
+    }
+
+    @VintfStability
+    parcelable LeAudioAseConfigurationSetting {
+        /**
+         * Audio Context that this configuration apply to
+         */
+        AudioContext audioContext;
+        /**
+         * Sequential or interleave packing used in Set CIG Parameters command
+         */
+        Packing packing;
+
+        @VintfStability
+        parcelable AseDirectionConfiguration {
+            /**
+             * ASE configuration
+             */
+            LeAudioAseConfiguration aseConfiguration;
+            /**
+             * QoS Configuration
+             */
+            @nullable LeAudioAseQosConfiguration qosConfiguration;
+            /**
+             * Data path configuration
+             * If not provided, getLeAudioAseDatapathConfiguration() will be
+             * called during the configuration, increasing the stream
+             * establishment time (not recommended).
+             */
+            @nullable LeAudioDataPathConfiguration dataPathConfiguration;
+        }
+        /**
+         * Sink ASEs configuration
+         */
+        @nullable List<AseDirectionConfiguration> sinkAseConfiguration;
+        /**
+         * Source ASEs configuration
+         */
+        @nullable List<AseDirectionConfiguration> sourceAseConfiguration;
+        /**
+         * Additional flags, used for configurations with special features
+         */
+        @nullable ConfigurationFlags flags;
+    }
+
+    /**
+     * ASE configuration requirements set by the BT stack.
+     */
+    @VintfStability
+    parcelable LeAudioConfigurationRequirement {
+        /**
+         * Audio Contect that this requirements apply to
+         */
+        AudioContext audioContext;
+
+        @VintfStability
+        parcelable AseDirectionRequirement {
+            /**
+             * Optional ASE configurations requirements
+             *
+             * Note that the Host can set as many or as little parameters in
+             * the `aseConfiguration.codecConfiguration` field as needed, to
+             * closely or loosely specify the requirements. If any parameter
+             * is not specified, the offloader can choose it freely. The
+             * offloader should put all the specified parameters into the
+             * `aseConfiguration.codecConfiguration` field of the returned
+             * configuration to let the BT stack verify if the requirements
+             * were met. The mandatory requirement set by the BT stack will be
+             * the Audio Location.
+             */
+            LeAudioAseConfiguration aseConfiguration;
+        }
+        /**
+         * Sink ASEs configuration setting
+         */
+        @nullable List<AseDirectionRequirement> sinkAseRequirement;
+        /**
+         * Source ASEs configuration setting
+         */
+        @nullable List<AseDirectionRequirement> sourceAseRequirement;
+        /**
+         * Additional flags, used to request configurations with special
+         * features
+         */
+        @nullable ConfigurationFlags flags;
+    }
+
+    /**
+     * Method that returns a proposed ASE configuration settings for each
+     * requested audio context type
+     *
+     * Note: _ENCODING session provides SINK ASE configuration
+     *       and _DECODING session provides SOURCE ASE configuration unless
+     *       BluetoothAudioProvider sets supportsMultidirectionalCapabilities to
+     *       true in ProviderInfo.
+     *       If supportsMultidirectionalCapabilities is set to true then the
+     *       BluetoothStack expects to get configuration list for SINK and SOURCE
+     *       on either _ENCODING or _DECODING session.
+     *
+     * @param remoteSinkAudioCapabilities List of remote sink capabilities
+     *        supported by an active group devices.
+     * @param remoteSourceAudioCapabilities List of remote source capabilities
+     *        supported by an active group devices.
+     * @param requirements ASE configuration requirements
+     *
+     * @return List<LeAudioAseConfigurationSetting>
+     */
+    List<LeAudioAseConfigurationSetting> getLeAudioAseConfiguration(
+            in @nullable List<LeAudioDeviceCapabilities> remoteSinkAudioCapabilities,
+            in @nullable List<LeAudioDeviceCapabilities> remoteSourceAudioCapabilities,
+            in List<LeAudioConfigurationRequirement> requirements);
+
+    @VintfStability
+    parcelable LeAudioAseQosConfigurationRequirement {
+        /**
+         * Audio Contect Type that this requirements apply to
+         */
+        AudioContext contextType;
+
+        /**
+         * QoS preferences received in Codec Configured ASE state. As defined in
+         * bluetooth service specification: Audio Stream Control Service" V1.0,
+         * Sec. 4.1 Audio Stream Endpoints, Table 4.3:"Additional_ASE_Parameters
+         * format when ASE_State = 0x01 (Codec Configured)".
+         */
+        @VintfStability
+        parcelable AseQosDirectionRequirement {
+            /**
+             * Support for unframed Isochronous Adaptation Layer PDUs.
+             * When set to FRAMED, the unframed PDUs are not supported.
+             */
+            Framing framing;
+            /**
+             * Preferred value for the PHY parameter to be written by the client
+             * for this ASE in the Config QoS operation
+             */
+            Phy[] preferredPhy;
+            /**
+             * Preferred value for the Retransmission Number parameter to be
+             * written by the client for this ASE in the Config QoS operation.
+             */
+            int preferredRetransmissionNum;
+            /**
+             * Preferred value for the Max Transport Latency parameter to be
+             * written by the client for this ASE in the Config QoS operation.
+             */
+            int maxTransportLatencyMs;
+            /**
+             * Minimum server supported Presentation Delay (in microseconds) for
+             * an ASE.
+             */
+            int presentationDelayMinUs;
+            /**
+             * Maximum server supported Presentation Delay (in microseconds) for
+             * an ASE.
+             */
+            int presentationDelayMaxUs;
+            /**
+             * Preferred minimum Presentation Delay (in microseconds) for an
+             * ASE.
+             */
+            int preferredPresentationDelayMinUs;
+            /**
+             * Preferred maximum Presentation Delay (in microseconds) for an
+             * ASE.
+             */
+            int preferredPresentationDelayMaxUs;
+
+            /**
+             * ASE configuration
+             */
+            LeAudioAseConfiguration aseConfiguration;
+        }
+        /**
+         * Sink ASEs configuration setting
+         */
+        @nullable AseQosDirectionRequirement sinkAseQosRequirement;
+        /**
+         * Source ASEs configuration setting
+         */
+        @nullable AseQosDirectionRequirement sourceAseQosRequirement;
+        /**
+         * Additional configuration flags requirements
+         */
+        @nullable ConfigurationFlags[] flags;
+    }
+
+    /**
+     * A directional pair for QoS configuration. Either one or both directions
+     * can be set, depending on the audio context and the requirements provided
+     * to getLeAudioAseQosConfiguration().
+     */
+    @VintfStability
+    parcelable LeAudioAseQosConfigurationPair {
+        @nullable LeAudioAseQosConfiguration sinkQosConfiguration;
+        @nullable LeAudioAseQosConfiguration sourceQosConfiguration;
+    }
+
+    /**
+     * Method that returns an ASE QoS configuration settings for the given ASE
+     * configuration,taking an ASE preferenced QoS parameters. It should be used
+     * to negotiaite the QoS parameters, when the initialy received QoS
+     * parameters are not within the boundaries received from the remote device
+     * after configuring the ASEs.
+     *
+     * @param qosRequirement ASE QoS configurations requirements
+     *
+     * @return LeAudioAseQosConfigurationPair
+     */
+    LeAudioAseQosConfigurationPair getLeAudioAseQosConfiguration(
+            in LeAudioAseQosConfigurationRequirement qosRequirement);
+
+    /**
+     * Audio data path configuration.
+     */
+    parcelable LeAudioDataPathConfigurationPair {
+        /* Host to Controller data path */
+        @nullable LeAudioDataPathConfiguration inputConfig;
+        /* Controller to Host data path */
+        @nullable LeAudioDataPathConfiguration outputConfig;
+    }
+
+    /**
+     * Used to get a data path configuration which dynamically depends on CIS
+     * connection handles in StreamMap. This is used if non-dynamic data path
+     * was not provided in LeAudioAseConfigurationSetting. Calling this during
+     * the unicast audio stream establishment might slightly delay the stream
+     * start.
+     */
+    LeAudioDataPathConfigurationPair getLeAudioAseDatapathConfiguration(
+            in AudioContext context, in StreamMap[] streamMap);
+
+    /*
+     * Audio Stream Endpoint state used to report Metadata changes on the remote
+     * device audio endpoints.
+     */
+    @VintfStability
+    @Backing(type="byte")
+    enum AseState {
+        ENABLING = 0x00,
+        STREAMING = 0x01,
+        DISABLING = 0x02,
+    }
+
+    /**
+     * Used to report metadata changes to the provider. This allows for a
+     * pseudo communication channel between the remote device and the provider,
+     * using the vendor specific metadata of the changing ASE state.
+     * It is used only when ASE is using configurations marked with the
+     * `PROVIDE_ASE_METADATA` flag.
+     */
+    void onSinkAseMetadataChanged(
+            in AseState state, int cigId, int cisId, in @nullable MetadataLtv[] metadata);
+    void onSourceAseMetadataChanged(
+            in AseState state, int cigId, int cisId, in @nullable MetadataLtv[] metadata);
 }
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl
index b9cec2d..ea9c4e1 100644
--- a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/IBluetoothAudioProviderFactory.aidl
@@ -69,19 +69,33 @@
      * General information relative to a provider
      * - An optional name
      * - A list of codec information
+     * - supportsMultidirectionalCapabilities if is set to false it means each
+     * session i.e. _ENCODING and _DECODING is responsible to provide
+     * configuration for a single direction:
+     *    _ENCODING for SINK ASE
+     *    _DECODING for SOURCE ASE
+     *
+     * If supportsMultidirectionalCapabilities is set to true, then either
+     * _ENCODING or _DECODING session can provide the configurations for either
+     * direction.
      */
     @VintfStability
     parcelable ProviderInfo {
         String name;
         CodecInfo[] codecInfos;
+        boolean supportsMultidirectionalCapabilities;
     }
 
     /**
      * Get general information relative to a provider.
      *
+     * This can be called at any time, or just once during the BT stack
+     * initialization.
+     *
      * @param sessionType Hardware Offload provider (*_HARDWARE_OFFLOAD_*)
      * @return General information relative to the provider.
-     *         The `null` value can be returned when the provider is not available
+     *         The `null` value can be returned when the provider is not
+     *         available
      */
     @nullable ProviderInfo getProviderInfo(in SessionType sessionType);
 }
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/LeAudioAseConfiguration.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/LeAudioAseConfiguration.aidl
new file mode 100644
index 0000000..9fb2ecf
--- /dev/null
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/LeAudioAseConfiguration.aidl
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.audio;
+
+import android.hardware.bluetooth.audio.CodecId;
+import android.hardware.bluetooth.audio.CodecSpecificConfigurationLtv;
+import android.hardware.bluetooth.audio.MetadataLtv;
+import android.hardware.bluetooth.audio.Phy;
+
+/**
+ * All the LeAudioAseConfiguration parameters are defined by the Bluetooth Audio
+ * Stream Control Service specification v.1.0, Sec. 5: "ASE Control Operations".
+ */
+@VintfStability
+parcelable LeAudioAseConfiguration {
+    @VintfStability
+    @Backing(type="byte")
+    enum TargetLatency {
+        UNDEFINED = 0x00,
+        LOWER = 0x01,
+        BALANCED_LATENCY_RELIABILITY = 0x02,
+        HIGHER_RELIABILITY = 0x03,
+    }
+
+    /**
+     * Target latency used in Configure Codec command - Can be UNDEFINED when
+     * used inside the AseDirectionRequirement, but shall not be UNDEFINED when
+     * used inside LeAudioAseConfigurationSetting.
+     */
+    TargetLatency targetLatency;
+
+    /**
+     * Target PHY used in Configure Codec command - Can be UNDEFINED when used
+     * inside the AseDirectionRequirement, but shall not be UNDEFINED when used
+     * inside LeAudioAseConfigurationSetting.
+     */
+    Phy targetPhy;
+
+    /**
+     * Codec ID - Can be Null when used inside the AseDirectionRequirement, but
+     * shall not be Null when used inside LeAudioAseConfigurationSetting.
+     */
+    @nullable CodecId codecId;
+
+    /**
+     * Codec configuration for ASE represented in the LTV types defined by
+     * Bluetooth SIG. Regardless of vendor specific configuration being used or
+     * not, this shall contain Bluetooth LTV types describing the common stream
+     * parameters, at least CodecSpecificConfigurationLtv.SamplingFrequency and
+     * CodecSpecificConfigurationLtv.AudioChannelAllocation. In addition, it
+     * should match aseConfiguration provided in LeAudioConfigurationRequirement
+     * as this will also be used to verify the requirements on the known LTV
+     * types.
+     */
+    CodecSpecificConfigurationLtv[] codecConfiguration;
+
+    /**
+     * Vendor specific codec configuration for ASE.
+     *
+     * This will not be parsed by the BT stack but will be written to the remote
+     * device as the codec specific configuration as part of the codec configure
+     * control point operation. If this is populated, only the
+     * `vendorCodecConfiguration` will be used for the ASE configuration,
+     * otherwise `codecConfiguration` will be used. The BT stack will not merge
+     * it with the codecConfiguration for any purpose.
+     */
+    @nullable byte[] vendorCodecConfiguration;
+
+    /**
+     * Metadata, packed as LTV - used to enable ASE. This is optional
+     */
+    @nullable MetadataLtv[] metadata;
+}
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl
index 7302aea..db753ad 100644
--- a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/LeAudioConfiguration.aidl
@@ -17,6 +17,8 @@
 package android.hardware.bluetooth.audio;
 
 import android.hardware.bluetooth.audio.CodecType;
+import android.hardware.bluetooth.audio.ConfigurationFlags;
+import android.hardware.bluetooth.audio.LeAudioAseConfiguration;
 import android.hardware.bluetooth.audio.LeAudioCodecConfiguration;
 
 @VintfStability
@@ -29,16 +31,40 @@
          */
         char streamHandle;
         /*
-         * Audio channel allocation is  a bit field, each enabled bit means that given audio
-         * direction, i.e. "left", or "right" is used. Ordering of audio channels comes from the
-         * least significant bit to the most significant bit. The valus follows the Bluetooth SIG
-         * Audio Location assigned number.
+         * Audio channel allocation is a bit field, each enabled bit means that
+         * given audio direction, i.e. "left", or "right" is used. Ordering of
+         * audio channels comes from the least significant bit to the most
+         * significant bit. The valus follows the Bluetooth SIG Audio Location
+         * assigned number.
          */
         int audioChannelAllocation;
         /*
          * The stream handle status
          */
         boolean isStreamActive;
+        /*
+         * LE Audio device ASE configuration
+         */
+        @nullable LeAudioAseConfiguration aseConfiguration;
+        /*
+         * Additional flags, used for configurations with special features
+         */
+        @nullable ConfigurationFlags flags;
+        parcelable BluetoothDeviceAddress {
+            enum DeviceAddressType {
+                BLE_ADDRESS_PUBLIC = 0x00,
+                BLE_ADDRESS_RANDOM = 0x01,
+            }
+            /**
+             * Peer device address. It should be non zero when isStreamActive is true
+             */
+            byte[6] deviceAddress;
+            /**
+             * Peer device address type.
+             */
+            DeviceAddressType deviceAddressType;
+        }
+        @nullable BluetoothDeviceAddress bluetoothDeviceAddress;
     }
     CodecType codecType;
     StreamMap[] streamMap;
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/MetadataLtv.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/MetadataLtv.aidl
new file mode 100644
index 0000000..b0befc1
--- /dev/null
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/MetadataLtv.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.audio;
+
+import android.hardware.bluetooth.audio.AudioContext;
+
+/**
+ * Used to exchange generic metadata between the stack and the provider.
+ * As defined in Bluetooth Assigned Numbers, Sec. 6.12.6.
+ */
+@VintfStability
+union MetadataLtv {
+    parcelable PreferredAudioContexts {
+        AudioContext values;
+    }
+    parcelable StreamingAudioContexts {
+        AudioContext values;
+    }
+    /* This is an opaque container for passing metadata between the provider and
+     * the remote device. It must not be interpreted by the BT stack.
+     */
+    parcelable VendorSpecific {
+        int companyId;
+        byte[] opaqueValue;
+    }
+
+    PreferredAudioContexts preferredAudioContexts;
+    StreamingAudioContexts streamingAudioContexts;
+    VendorSpecific vendorSpecific;
+}
diff --git a/bluetooth/audio/aidl/android/hardware/bluetooth/audio/Phy.aidl b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/Phy.aidl
new file mode 100644
index 0000000..cbffdd5
--- /dev/null
+++ b/bluetooth/audio/aidl/android/hardware/bluetooth/audio/Phy.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.bluetooth.audio;
+
+/**
+ * Used to exchange generic Phy parameter between the stack and the provider.
+ */
+@VintfStability
+@Backing(type="byte")
+enum Phy {
+    UNDEFINED = 0x00,
+    ONE_M = 0x01,
+    TWO_M = 0x02,
+    CODED = 0x03,
+}