diff --git a/audio/4.1/config/audio_policy_configuration.xsd b/audio/4.1/config/audio_policy_configuration.xsd
new file mode 100644
index 0000000..311b9c1
--- /dev/null
+++ b/audio/4.1/config/audio_policy_configuration.xsd
@@ -0,0 +1,595 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+         Licensed under the Apache License, Version 2.0 (the "License");
+         you may not use this file except in compliance with the License.
+         You may obtain a copy of the License at
+
+                    http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing, software
+         distributed under the License is distributed on an "AS IS" BASIS,
+         WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+         See the License for the specific language governing permissions and
+         limitations under the License.
+-->
+<!-- TODO: define a targetNamespace. Note that it will break retrocompatibility -->
+<xs:schema version="2.0"
+           elementFormDefault="qualified"
+           attributeFormDefault="unqualified"
+           xmlns:xs="http://www.w3.org/2001/XMLSchema">
+    <!-- List the config versions supported by audio policy. -->
+    <xs:simpleType name="version">
+        <xs:restriction base="xs:decimal">
+            <xs:enumeration value="1.0"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="halVersion">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Version of the interface the hal implements.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:decimal">
+            <!-- List of HAL versions supported by the framework. -->
+            <xs:enumeration value="2.0"/>
+            <xs:enumeration value="3.0"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:element name="audioPolicyConfiguration">
+        <xs:complexType>
+            <xs:sequence>
+                <xs:element name="globalConfiguration" type="globalConfiguration"/>
+                <xs:element name="modules" type="modules" maxOccurs="unbounded"/>
+                <xs:element name="volumes" type="volumes" maxOccurs="unbounded"/>
+                <xs:element name="surroundSound" type="surroundSound" />
+            </xs:sequence>
+            <xs:attribute name="version" type="version"/>
+        </xs:complexType>
+        <xs:key name="moduleNameKey">
+            <xs:selector xpath="modules/module"/>
+            <xs:field xpath="@name"/>
+        </xs:key>
+        <xs:unique name="volumeTargetUniqueness">
+            <xs:selector xpath="volumes/volume"/>
+            <xs:field xpath="@stream"/>
+            <xs:field xpath="@deviceCategory"/>
+        </xs:unique>
+        <xs:key name="volumeCurveNameKey">
+            <xs:selector xpath="volumes/reference"/>
+            <xs:field xpath="@name"/>
+        </xs:key>
+        <xs:keyref name="volumeCurveRef" refer="volumeCurveNameKey">
+            <xs:selector xpath="volumes/volume"/>
+            <xs:field xpath="@ref"/>
+        </xs:keyref>
+    </xs:element>
+    <xs:complexType name="globalConfiguration">
+        <xs:attribute name="speaker_drc_enabled" type="xs:boolean" use="required"/>
+    </xs:complexType>
+    <xs:complexType name="modules">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                There should be one section per audio HW module present on the platform.
+                Each <module/> contains two mandatory tags: “halVersion” and “name”.
+                The module "name" is the same as in previous .conf file.
+                Each module must contain the following sections:
+                 - <devicePorts/>: a list of device descriptors for all
+                   input and output devices accessible via this module.
+                   This contains both permanently attached devices and removable devices.
+                 - <mixPorts/>: listing all output and input streams exposed by the audio HAL
+                 - <routes/>: list of possible connections between input
+                   and output devices or between stream and devices.
+                   A <route/> is defined by a set of 3 attributes:
+                        -"type": mux|mix means all sources are mutual exclusive (mux) or can be mixed (mix)
+                        -"sink": the sink involved in this route
+                        -"sources": all the sources than can be connected to the sink via this route
+                 - <attachedDevices/>: permanently attached devices.
+                   The attachedDevices section is a list of devices names.
+                   Their names correspond to device names defined in "devicePorts" section.
+                 - <defaultOutputDevice/> is the device to be used when no policy rule applies
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="module" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="attachedDevices" type="attachedDevices" minOccurs="0">
+                            <xs:unique name="attachedDevicesUniqueness">
+                                <xs:selector xpath="item"/>
+                                <xs:field xpath="."/>
+                            </xs:unique>
+                        </xs:element>
+                        <xs:element name="defaultOutputDevice" type="xs:token" minOccurs="0"/>
+                        <xs:element name="mixPorts" type="mixPorts" minOccurs="0"/>
+                        <xs:element name="devicePorts" type="devicePorts" minOccurs="0"/>
+                        <xs:element name="routes" type="routes" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="name" type="xs:string" use="required"/>
+                    <xs:attribute name="halVersion" type="halVersion" use="required"/>
+                </xs:complexType>
+                <xs:unique name="mixPortNameUniqueness">
+                    <xs:selector xpath="mixPorts/mixPort"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+                <xs:key name="devicePortNameKey">
+                    <xs:selector xpath="devicePorts/devicePort"/>
+                    <xs:field xpath="@tagName"/>
+                </xs:key>
+                <xs:unique name="devicePortUniqueness">
+                    <xs:selector xpath="devicePorts/devicePort"/>
+                    <xs:field xpath="@type"/>
+                    <xs:field xpath="@address"/>
+                </xs:unique>
+                <xs:keyref name="defaultOutputDeviceRef" refer="devicePortNameKey">
+                    <xs:selector xpath="defaultOutputDevice"/>
+                    <xs:field xpath="."/>
+                </xs:keyref>
+                <xs:keyref name="attachedDeviceRef" refer="devicePortNameKey">
+                    <xs:selector xpath="attachedDevices/item"/>
+                    <xs:field xpath="."/>
+                </xs:keyref>
+                <!-- The following 3 constraints try to make sure each sink port
+                     is reference in one an only one route. -->
+                <xs:key name="routeSinkKey">
+                    <!-- predicate [@type='sink'] does not work in xsd 1.0 -->
+                    <xs:selector xpath="devicePorts/devicePort|mixPorts/mixPort"/>
+                    <xs:field xpath="@tagName|@name"/>
+                </xs:key>
+                <xs:keyref name="routeSinkRef" refer="routeSinkKey">
+                    <xs:selector xpath="routes/route"/>
+                    <xs:field xpath="@sink"/>
+                </xs:keyref>
+                <xs:unique name="routeUniqueness">
+                    <xs:selector xpath="routes/route"/>
+                    <xs:field xpath="@sink"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="attachedDevices">
+        <xs:sequence>
+            <xs:element name="item" type="xs:token" minOccurs="0" maxOccurs="unbounded"/>
+        </xs:sequence>
+    </xs:complexType>
+    <!-- TODO: separate values by space for better xsd validations. -->
+    <xs:simpleType name="audioInOutFlags">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                "|" separated list of audio_output_flags_t or audio_input_flags_t.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="|[_A-Z]+(\|[_A-Z]+)*"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="role">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="sink"/>
+            <xs:enumeration value="source"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="mixPorts">
+        <xs:sequence>
+            <xs:element name="mixPort" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="profile" type="profile" minOccurs="0" maxOccurs="unbounded"/>
+                        <xs:element name="gains" type="gains" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="name" type="xs:token" use="required"/>
+                    <xs:attribute name="role" type="role" use="required"/>
+                    <xs:attribute name="flags" type="audioInOutFlags"/>
+                    <xs:attribute name="maxOpenCount" type="xs:unsignedInt"/>
+                    <xs:attribute name="maxActiveCount" type="xs:unsignedInt"/>
+                    <xs:attribute name="preferredUsage" type="audioUsageList">
+                        <xs:annotation>
+                            <xs:documentation xml:lang="en">
+                                When choosing the mixPort of an audio track, the audioPolicy
+                                first considers the mixPorts with a preferredUsage including
+                                the track AudioUsage preferred .
+                                If non support the track format, the other mixPorts are considered.
+                                Eg: a <mixPort preferredUsage="AUDIO_USAGE_MEDIA" /> will receive
+                                    the audio of all apps playing with a MEDIA usage.
+                                    It may receive audio from ALARM if there are no audio compatible
+                                    <mixPort preferredUsage="AUDIO_USAGE_ALARM" />.
+                             </xs:documentation>
+                        </xs:annotation>
+                    </xs:attribute>
+                </xs:complexType>
+                <xs:unique name="mixPortProfileUniqueness">
+                    <xs:selector xpath="profile"/>
+                    <xs:field xpath="format"/>
+                    <xs:field xpath="samplingRate"/>
+                    <xs:field xpath="channelMasks"/>
+                </xs:unique>
+                <xs:unique name="mixPortGainUniqueness">
+                    <xs:selector xpath="gains/gain"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <!-- Enum values of audio_device_t in audio.h
+         TODO: generate from hidl to avoid manual sync.
+         TODO: separate source and sink in the xml for better xsd validations. -->
+    <xs:simpleType name="audioDevice">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_DEVICE_NONE"/>
+
+            <xs:enumeration value="AUDIO_DEVICE_OUT_EARPIECE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADPHONE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_DIGITAL"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_ACCESSORY"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_DEVICE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_TELEPHONY_TX"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI_ARC"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPDIF"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_FM"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER_SAFE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_IP"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BUS"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_PROXY"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HEARING_AID"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_ECHO_CANCELLER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_DEFAULT"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_STUB"/>
+
+            <!-- Due to the xml format, IN types can not be a separated from OUT types -->
+            <xs:enumeration value="AUDIO_DEVICE_IN_COMMUNICATION"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_AMBIENT"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BUILTIN_MIC"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_WIRED_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_AUX_DIGITAL"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_TELEPHONY_RX"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BACK_MIC"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_ACCESSORY"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_DEVICE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_FM_TUNER"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_TV_TUNER"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_SPDIF"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_A2DP"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_LOOPBACK"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_IP"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BUS"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_PROXY"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_BLE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_DEFAULT"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_STUB"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of audio_format_t in audio.h
+         TODO: generate from hidl to avoid manual sync. -->
+    <xs:simpleType name="audioFormat">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_FORMAT_PCM_16_BIT" />
+            <xs:enumeration value="AUDIO_FORMAT_PCM_8_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_32_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_8_24_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_FLOAT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_24_BIT_PACKED"/>
+            <xs:enumeration value="AUDIO_FORMAT_MP3"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_NB"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_WB"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_MAIN"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_SSR"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LTP"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_SCALABLE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ERLC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ELD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_MAIN"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SSR"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LTP"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SCALABLE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ERLC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ELD"/>
+            <xs:enumeration value="AUDIO_FORMAT_VORBIS"/>
+            <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_OPUS"/>
+            <xs:enumeration value="AUDIO_FORMAT_AC3"/>
+            <xs:enumeration value="AUDIO_FORMAT_E_AC3"/>
+            <xs:enumeration value="AUDIO_FORMAT_DTS"/>
+            <xs:enumeration value="AUDIO_FORMAT_DTS_HD"/>
+            <xs:enumeration value="AUDIO_FORMAT_IEC61937"/>
+            <xs:enumeration value="AUDIO_FORMAT_DOLBY_TRUEHD"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRC"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCB"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCWB"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCNW"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADIF"/>
+            <xs:enumeration value="AUDIO_FORMAT_WMA"/>
+            <xs:enumeration value="AUDIO_FORMAT_WMA_PRO"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_WB_PLUS"/>
+            <xs:enumeration value="AUDIO_FORMAT_MP2"/>
+            <xs:enumeration value="AUDIO_FORMAT_QCELP"/>
+            <xs:enumeration value="AUDIO_FORMAT_DSD"/>
+            <xs:enumeration value="AUDIO_FORMAT_FLAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_ALAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_APE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS"/>
+            <xs:enumeration value="AUDIO_FORMAT_SBC"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX_HD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AC4"/>
+            <xs:enumeration value="AUDIO_FORMAT_LDAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_E_AC3_JOC"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_1_0"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_2_0"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_2_1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_XHE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_XHE"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of audio::common::4_0::AudioUsage
+         TODO: generate from HIDL to avoid manual sync. -->
+    <xs:simpleType name="audioUsage">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_USAGE_UNKNOWN" />
+            <xs:enumeration value="AUDIO_USAGE_MEDIA" />
+            <xs:enumeration value="AUDIO_USAGE_VOICE_COMMUNICATION" />
+            <xs:enumeration value="AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING" />
+            <xs:enumeration value="AUDIO_USAGE_ALARM" />
+            <xs:enumeration value="AUDIO_USAGE_NOTIFICATION" />
+            <xs:enumeration value="AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_SONIFICATION" />
+            <xs:enumeration value="AUDIO_USAGE_GAME" />
+            <xs:enumeration value="AUDIO_USAGE_VIRTUAL_SOURCE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANT" />
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="audioUsageList">
+        <xs:list itemType="audioUsage"/>
+    </xs:simpleType>
+    <!-- TODO: Change to a space separated list to xsd enforce correctness. -->
+    <xs:simpleType name="samplingRates">
+        <xs:restriction base="xs:string">
+            <xs:pattern value="[0-9]+(,[0-9]+)*"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- TODO: Change to a space separated list to xsd enforce correctness. -->
+    <xs:simpleType name="channelMask">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Comma (",") separated list of channel flags
+                from audio_channel_mask_t.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="[_A-Z][_A-Z0-9]*(,[_A-Z][_A-Z0-9]*)*"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="profile">
+        <xs:attribute name="name" type="xs:token" use="optional"/>
+        <xs:attribute name="format" type="audioFormat" use="optional"/>
+        <xs:attribute name="samplingRates" type="samplingRates" use="optional"/>
+        <xs:attribute name="channelMasks" type="channelMask" use="optional"/>
+    </xs:complexType>
+    <xs:simpleType name="gainMode">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_GAIN_MODE_JOINT"/>
+            <xs:enumeration value="AUDIO_GAIN_MODE_CHANNELS"/>
+            <xs:enumeration value="AUDIO_GAIN_MODE_RAMP"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="gains">
+        <xs:sequence>
+            <xs:element name="gain" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:attribute name="name" type="xs:token" use="required"/>
+                    <xs:attribute name="mode" type="gainMode" use="required"/>
+                    <xs:attribute name="channel_mask" type="channelMask" use="optional"/>
+                    <xs:attribute name="minValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="maxValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="defaultValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="stepValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="minRampMs" type="xs:int" use="optional"/>
+                    <xs:attribute name="maxRampMs" type="xs:int" use="optional"/>
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="devicePorts">
+        <xs:sequence>
+            <xs:element name="devicePort" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="profile" type="profile" minOccurs="0" maxOccurs="unbounded"/>
+                        <xs:element name="gains" type="gains" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="tagName" type="xs:token" use="required"/>
+                    <xs:attribute name="type" type="audioDevice" use="required"/>
+                    <xs:attribute name="role" type="role" use="required"/>
+                    <xs:attribute name="address" type="xs:string" use="optional" default=""/>
+                    <!-- Note that XSD 1.0 can not check that a type only has one default. -->
+                    <xs:attribute name="default" type="xs:boolean" use="optional">
+                        <xs:annotation>
+                            <xs:documentation xml:lang="en">
+                                The default device will be used if multiple have the same type
+                                and no explicit route request exists for a specific device of
+                                that type.
+                            </xs:documentation>
+                        </xs:annotation>
+                    </xs:attribute>
+                </xs:complexType>
+                <xs:unique name="devicePortProfileUniqueness">
+                    <xs:selector xpath="profile"/>
+                    <xs:field xpath="format"/>
+                    <xs:field xpath="samplingRate"/>
+                    <xs:field xpath="channelMasks"/>
+                </xs:unique>
+                <xs:unique name="devicePortGainUniqueness">
+                    <xs:selector xpath="gains/gain"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="mixType">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="mix"/>
+            <xs:enumeration value="mux"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="routes">
+        <xs:sequence>
+            <xs:element name="route" minOccurs="0" maxOccurs="unbounded">
+                <xs:annotation>
+                    <xs:documentation xml:lang="en">
+                        List all available sources for a given sink.
+                    </xs:documentation>
+                </xs:annotation>
+                <xs:complexType>
+                    <xs:attribute name="type" type="mixType" use="required"/>
+                    <xs:attribute name="sink" type="xs:string" use="required"/>
+                    <xs:attribute name="sources" type="xs:string" use="required"/>
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="volumes">
+        <xs:sequence>
+            <xs:element name="volume" type="volume" minOccurs="0" maxOccurs="unbounded"/>
+            <xs:element name="reference" type="reference" minOccurs="0" maxOccurs="unbounded">
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <!-- TODO: Always require a ref for better xsd validations.
+               Currently a volume could have no points nor ref
+               as it can not be forbidden by xsd 1.0.-->
+    <xs:simpleType name="volumePoint">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Comma separated pair of number.
+                The fist one is the framework level (between 0 and 100).
+                The second one is the volume to send to the HAL.
+                The framework will interpolate volumes not specified.
+                Their MUST be at least 2 points specified.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="([0-9]{1,2}|100),-?[0-9]+"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of audio_stream_type_t in audio-base.h
+         TODO: generate from hidl to avoid manual sync. -->
+    <xs:simpleType name="stream">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_STREAM_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_STREAM_SYSTEM"/>
+            <xs:enumeration value="AUDIO_STREAM_RING"/>
+            <xs:enumeration value="AUDIO_STREAM_MUSIC"/>
+            <xs:enumeration value="AUDIO_STREAM_ALARM"/>
+            <xs:enumeration value="AUDIO_STREAM_NOTIFICATION"/>
+            <xs:enumeration value="AUDIO_STREAM_BLUETOOTH_SCO"/>
+            <xs:enumeration value="AUDIO_STREAM_ENFORCED_AUDIBLE"/>
+            <xs:enumeration value="AUDIO_STREAM_DTMF"/>
+            <xs:enumeration value="AUDIO_STREAM_TTS"/>
+            <xs:enumeration value="AUDIO_STREAM_ACCESSIBILITY"/>
+            <xs:enumeration value="AUDIO_STREAM_REROUTING"/>
+            <xs:enumeration value="AUDIO_STREAM_PATCH"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of device_category from Volume.h.
+         TODO: generate from hidl to avoid manual sync. -->
+    <xs:simpleType name="deviceCategory">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="DEVICE_CATEGORY_HEADSET"/>
+            <xs:enumeration value="DEVICE_CATEGORY_SPEAKER"/>
+            <xs:enumeration value="DEVICE_CATEGORY_EARPIECE"/>
+            <xs:enumeration value="DEVICE_CATEGORY_EXT_MEDIA"/>
+            <xs:enumeration value="DEVICE_CATEGORY_HEARING_AID"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="volume">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Volume section defines a volume curve for a given use case and device category.
+                It contains a list of points of this curve expressing the attenuation in Millibels
+                for a given volume index from 0 to 100.
+                <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_SPEAKER">
+                    <point>0,-9600</point>
+                    <point>100,0</point>
+                </volume>
+
+                It may also reference a reference/@name to avoid duplicating curves.
+                <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_SPEAKER"
+                        ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
+                <reference name="DEFAULT_MEDIA_VOLUME_CURVE">
+                    <point>0,-9600</point>
+                    <point>100,0</point>
+                </reference>
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="point" type="volumePoint" minOccurs="0" maxOccurs="unbounded"/>
+        </xs:sequence>
+        <xs:attribute name="stream" type="stream"/>
+        <xs:attribute name="deviceCategory" type="deviceCategory"/>
+        <xs:attribute name="ref" type="xs:token" use="optional"/>
+    </xs:complexType>
+    <xs:complexType name="reference">
+        <xs:sequence>
+            <xs:element name="point" type="volumePoint" minOccurs="2" maxOccurs="unbounded"/>
+        </xs:sequence>
+        <xs:attribute name="name" type="xs:token" use="required"/>
+    </xs:complexType>
+    <xs:complexType name="surroundSound">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Surround Sound section provides configuration related to handling of
+                multi-channel formats.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="formats" type="surroundFormats"/>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="surroundFormatsList">
+        <xs:list itemType="audioFormat" />
+    </xs:simpleType>
+    <xs:complexType name="surroundFormats">
+        <xs:sequence>
+            <xs:element name="format" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:attribute name="name" type="audioFormat" use="required"/>
+                    <xs:attribute name="subformats" type="surroundFormatsList" />
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+</xs:schema>
diff --git a/biometrics/face/1.0/IBiometricsFace.hal b/biometrics/face/1.0/IBiometricsFace.hal
index 1c7bfb9..0ac788e 100644
--- a/biometrics/face/1.0/IBiometricsFace.hal
+++ b/biometrics/face/1.0/IBiometricsFace.hal
@@ -225,7 +225,10 @@
      * Authenticates the active user.
      *
      * An optional operationId can be specified as a token from the transaction
-     * being authorized.
+     * being authorized. The hardware may enter a standby state during
+     * authentication, where the device is idle to conserve power while
+     * authenticating, e.g. after 3 seconds without finding a face. See
+     * IBiometricsFace#userActivity() for more info.
      *
      * @param operationId A non-zero operation id associated with a crypto
      * object instance; or 0 if not being used.
@@ -233,4 +236,17 @@
      */
     @callflow(next={"cancel", "generateChallenge", "remove"})
     authenticate(uint64_t operationId) generates (Status status);
+
+    /**
+     * A hint to the HAL to continue looking for faces.
+     *
+     * This method should only be used when the HAL is in the authenticating
+     * or standby state. Using this method when the HAL is not in one of the
+     * mentioned states must return OPERATION_NOT_SUPPORTED. Calling this
+     * method while the HAL is already authenticating may extend the duration
+     * where it's looking for a face.
+     *
+     * @return status The status of this method call.
+     */
+    userActivity() generates (Status status);
 };
diff --git a/camera/common/1.0/default/CameraModule.cpp b/camera/common/1.0/default/CameraModule.cpp
index eb840a7..392ebbc 100644
--- a/camera/common/1.0/default/CameraModule.cpp
+++ b/camera/common/1.0/default/CameraModule.cpp
@@ -235,7 +235,7 @@
     chars.update(keyTag, availableKeys);
 }
 
-CameraModule::CameraModule(camera_module_t *module) {
+CameraModule::CameraModule(camera_module_t *module) : mNumberOfCameras(0) {
     if (module == NULL) {
         ALOGE("%s: camera hardware module must not be null", __FUNCTION__);
         assert(0);
@@ -264,7 +264,8 @@
         res = mModule->init();
         ATRACE_END();
     }
-    mCameraInfoMap.setCapacity(getNumberOfCameras());
+    mNumberOfCameras = getNumberOfCameras();
+    mCameraInfoMap.setCapacity(mNumberOfCameras);
     return res;
 }
 
@@ -322,7 +323,7 @@
 int CameraModule::getPhysicalCameraInfo(int physicalCameraId, camera_metadata_t **physicalInfo) {
     ATRACE_CALL();
     Mutex::Autolock lock(mCameraInfoLock);
-    if (physicalCameraId < 0) {
+    if (physicalCameraId < mNumberOfCameras) {
         ALOGE("%s: Invalid physical camera ID %d", __FUNCTION__, physicalCameraId);
         return -EINVAL;
     }
@@ -334,6 +335,10 @@
                 __FUNCTION__);
         return -ENODEV;
     }
+    if (mModule->get_physical_camera_info == nullptr) {
+        ALOGE("%s: get_physical_camera is NULL for module version 2.5", __FUNCTION__);
+        return -EINVAL;
+    }
 
     ssize_t index = mPhysicalCameraInfoMap.indexOfKey(physicalCameraId);
     if (index == NAME_NOT_FOUND) {
diff --git a/camera/common/1.0/default/include/CameraModule.h b/camera/common/1.0/default/include/CameraModule.h
index ed853bf..aee9654 100644
--- a/camera/common/1.0/default/include/CameraModule.h
+++ b/camera/common/1.0/default/include/CameraModule.h
@@ -75,6 +75,7 @@
             int32_t keyTag, const Vector<int32_t>& appendKeys);
     status_t filterOpenErrorCode(status_t err);
     camera_module_t *mModule;
+    int mNumberOfCameras;
     KeyedVector<int, camera_info> mCameraInfoMap;
     KeyedVector<int, int> mDeviceVersionMap;
     KeyedVector<int, camera_metadata_t*> mPhysicalCameraInfoMap;
diff --git a/camera/device/3.5/ICameraDevice.hal b/camera/device/3.5/ICameraDevice.hal
index e7e8dd3..a77380f 100644
--- a/camera/device/3.5/ICameraDevice.hal
+++ b/camera/device/3.5/ICameraDevice.hal
@@ -36,11 +36,24 @@
      * this logical camera device. This information may not change between consecutive calls.
      *
      * Note that HAL must support this function for physical camera IDs that are
-     * not exposed via ICameraProvider::getCameraIdList().
+     * not exposed via ICameraProvider::getCameraIdList(). Calling
+     * getCameraDeviceInterface_V3_x() on these camera IDs must return ILLEGAL_ARGUMENT.
+     *
+     * The characteristics of all cameras returned by
+     * ICameraProvider::getCameraIdList() must be queried via
+     * getCameraCharacteristics(). Calling getPhysicalCameraCharacteristics() on
+     * those cameras must return ILLEGAL_ARGUMENT.
+     *
+     * @param physicalCameraId The physical camera id parsed from the logical
+     *     camera's ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS static metadata
+     *     key. The framework assumes that this ID is just the <id> part of fully
+     *     qualified camera device name "device@<major>.<minor>/<type>/<id>". And
+     *     the physical camera must be of the same version and type as the parent
+     *     logical camera device.
      *
      * @return status Status code for the operation, one of:
      *     OK:
-     *         On a successful query of the camera device characteristics
+     *         On a successful query of the physical camera device characteristics
      *     INTERNAL_ERROR:
      *         The camera device cannot be opened due to an internal
      *         error.
@@ -50,6 +63,9 @@
      *         instance must be acquired if the device is reconnected. All
      *         subsequent calls on this interface must return
      *         CAMERA_DISCONNECTED.
+     *     ILLEGAL_ARGUMENT:
+     *         If the physicalCameraId is not a valid physical camera Id outside
+     *         of ICameraProvider::getCameraIdList().
      *
      * @return cameraCharacteristics
      *     The static metadata for this logical camera device's physical device, or an empty
diff --git a/camera/device/3.5/default/CameraDevice.cpp b/camera/device/3.5/default/CameraDevice.cpp
index c5d6c57..a6969af 100644
--- a/camera/device/3.5/default/CameraDevice.cpp
+++ b/camera/device/3.5/default/CameraDevice.cpp
@@ -79,6 +79,10 @@
                 int ret = mModule->getPhysicalCameraInfo((int)id, &physicalInfo);
                 if (ret == OK) {
                     V3_2::implementation::convertToHidl(physicalInfo, &cameraCharacteristics);
+                } else if (ret == -EINVAL) {
+                    ALOGE("%s: %s is not a valid physical camera Id outside of getCameraIdList()",
+                            __FUNCTION__, physicalCameraId.c_str());
+                    status = Status::ILLEGAL_ARGUMENT;
                 } else {
                     ALOGE("%s: Failed to get physical camera %s info: %s (%d)!", __FUNCTION__,
                             physicalCameraId.c_str(), strerror(-ret), ret);
diff --git a/camera/provider/2.4/vts/functional/Android.bp b/camera/provider/2.4/vts/functional/Android.bp
index ead4083..eb8d43e 100644
--- a/camera/provider/2.4/vts/functional/Android.bp
+++ b/camera/provider/2.4/vts/functional/Android.bp
@@ -37,6 +37,7 @@
         "android.hardware.camera.device@3.2",
         "android.hardware.camera.device@3.3",
         "android.hardware.camera.device@3.4",
+        "android.hardware.camera.device@3.5",
         "android.hardware.camera.provider@2.4",
         "android.hardware.graphics.allocator@2.0",
         "android.hardware.graphics.common@1.0",
diff --git a/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp b/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
index fd9396c..94d06e8 100644
--- a/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
+++ b/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
@@ -28,6 +28,7 @@
 
 #include <android/hardware/camera/device/1.0/ICameraDevice.h>
 #include <android/hardware/camera/device/3.2/ICameraDevice.h>
+#include <android/hardware/camera/device/3.5/ICameraDevice.h>
 #include <android/hardware/camera/device/3.3/ICameraDeviceSession.h>
 #include <android/hardware/camera/device/3.4/ICameraDeviceSession.h>
 #include <android/hardware/camera/device/3.4/ICameraDeviceCallback.h>
@@ -144,10 +145,12 @@
 namespace {
     // "device@<version>/legacy/<id>"
     const char *kDeviceNameRE = "device@([0-9]+\\.[0-9]+)/%s/(.+)";
+    const int CAMERA_DEVICE_API_VERSION_3_5 = 0x305;
     const int CAMERA_DEVICE_API_VERSION_3_4 = 0x304;
     const int CAMERA_DEVICE_API_VERSION_3_3 = 0x303;
     const int CAMERA_DEVICE_API_VERSION_3_2 = 0x302;
     const int CAMERA_DEVICE_API_VERSION_1_0 = 0x100;
+    const char *kHAL3_5 = "3.5";
     const char *kHAL3_4 = "3.4";
     const char *kHAL3_3 = "3.3";
     const char *kHAL3_2 = "3.2";
@@ -182,7 +185,9 @@
             return -1;
         }
 
-        if (version.compare(kHAL3_4) == 0) {
+        if (version.compare(kHAL3_5) == 0) {
+            return CAMERA_DEVICE_API_VERSION_3_5;
+        } else if (version.compare(kHAL3_4) == 0) {
             return CAMERA_DEVICE_API_VERSION_3_4;
         } else if (version.compare(kHAL3_3) == 0) {
             return CAMERA_DEVICE_API_VERSION_3_3;
@@ -670,12 +675,19 @@
             HalStreamConfiguration *halStreamConfig /*out*/,
             bool *supportsPartialResults /*out*/,
             uint32_t *partialResultCount /*out*/);
+
+    void verifyLogicalCameraMetadata(const std::string& cameraName,
+            const ::android::sp<::android::hardware::camera::device::V3_2::ICameraDevice>& device,
+            const CameraMetadata& chars, int deviceVersion,
+            const hidl_vec<hidl_string>& deviceNames);
+    void verifyCameraCharacteristics(Status status, const CameraMetadata& chars);
+
     static Status getAvailableOutputStreams(camera_metadata_t *staticMeta,
             std::vector<AvailableStream> &outputStreams,
             const AvailableStream *threshold = nullptr);
     static Status isConstrainedModeAvailable(camera_metadata_t *staticMeta);
-    static Status isLogicalMultiCamera(camera_metadata_t *staticMeta);
-    static Status getPhysicalCameraIds(camera_metadata_t *staticMeta,
+    static Status isLogicalMultiCamera(const camera_metadata_t *staticMeta);
+    static Status getPhysicalCameraIds(const camera_metadata_t *staticMeta,
             std::unordered_set<std::string> *physicalIds/*out*/);
     static Status getSupportedKeys(camera_metadata_t *staticMeta,
             uint32_t tagId, std::unordered_set<int32_t> *requestIDs/*out*/);
@@ -1266,6 +1278,7 @@
     for (const auto& name : cameraDeviceNames) {
         int deviceVersion = getCameraDeviceVersion(name, mProviderType);
         switch (deviceVersion) {
+            case CAMERA_DEVICE_API_VERSION_3_5:
             case CAMERA_DEVICE_API_VERSION_3_4:
             case CAMERA_DEVICE_API_VERSION_3_3:
             case CAMERA_DEVICE_API_VERSION_3_2: {
@@ -1307,6 +1320,7 @@
     for (const auto& name : cameraDeviceNames) {
         int deviceVersion = getCameraDeviceVersion(name, mProviderType);
         switch (deviceVersion) {
+            case CAMERA_DEVICE_API_VERSION_3_5:
             case CAMERA_DEVICE_API_VERSION_3_4:
             case CAMERA_DEVICE_API_VERSION_3_3:
             case CAMERA_DEVICE_API_VERSION_3_2: {
@@ -2047,6 +2061,7 @@
     for (const auto& name : cameraDeviceNames) {
         int deviceVersion = getCameraDeviceVersion(name, mProviderType);
         switch (deviceVersion) {
+            case CAMERA_DEVICE_API_VERSION_3_5:
             case CAMERA_DEVICE_API_VERSION_3_4:
             case CAMERA_DEVICE_API_VERSION_3_3:
             case CAMERA_DEVICE_API_VERSION_3_2: {
@@ -2063,41 +2078,31 @@
                 ASSERT_TRUE(ret.isOk());
 
                 ret = device3_x->getCameraCharacteristics([&](auto status, const auto& chars) {
-                    ALOGI("getCameraCharacteristics returns status:%d", (int)status);
-                    ASSERT_EQ(Status::OK, status);
-                    const camera_metadata_t* metadata = (camera_metadata_t*)chars.data();
-                    size_t expectedSize = chars.size();
-                    int result = validate_camera_metadata_structure(metadata, &expectedSize);
-                    ASSERT_TRUE((result == 0) || (result == CAMERA_METADATA_VALIDATION_SHIFTED));
-                    size_t entryCount = get_camera_metadata_entry_count(metadata);
-                    // TODO: we can do better than 0 here. Need to check how many required
-                    // characteristics keys we've defined.
-                    ASSERT_GT(entryCount, 0u);
-                    ALOGI("getCameraCharacteristics metadata entry count is %zu", entryCount);
+                    verifyCameraCharacteristics(status, chars);
 
-                    camera_metadata_ro_entry entry;
-                    int retcode = find_camera_metadata_ro_entry(metadata,
-                            ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL, &entry);
-                    if ((0 == retcode) && (entry.count > 0)) {
-                        uint8_t hardwareLevel = entry.data.u8[0];
-                        ASSERT_TRUE(
-                                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED ||
-                                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_FULL ||
-                                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3 ||
-                                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL);
-                    } else {
-                        ADD_FAILURE() << "Get camera hardware level failed!";
-                    }
-
-                    entry.count = 0;
-                    retcode = find_camera_metadata_ro_entry(metadata,
-                            ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION, &entry);
-                    if ((0 == retcode) || (entry.count > 0)) {
-                        ADD_FAILURE() << "ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION "
-                            << " per API contract should never be set by Hal!";
-                    }
+                    verifyLogicalCameraMetadata(name, device3_x, chars, deviceVersion,
+                            cameraDeviceNames);
                 });
                 ASSERT_TRUE(ret.isOk());
+
+                //getPhysicalCameraCharacteristics will fail for publicly
+                //advertised camera IDs.
+                if (deviceVersion >= CAMERA_DEVICE_API_VERSION_3_5) {
+                    auto castResult = device::V3_5::ICameraDevice::castFrom(device3_x);
+                    ASSERT_TRUE(castResult.isOk());
+                    ::android::sp<::android::hardware::camera::device::V3_5::ICameraDevice>
+                            device3_5 = castResult;
+                    ASSERT_NE(device3_5, nullptr);
+
+                    std::string version, cameraId;
+                    ASSERT_TRUE(::matchDeviceName(name, mProviderType, &version, &cameraId));
+                    Return<void> ret = device3_5->getPhysicalCameraCharacteristics(cameraId,
+                            [&](auto status, const auto& chars) {
+                        ASSERT_TRUE(Status::ILLEGAL_ARGUMENT == status);
+                        ASSERT_EQ(0, chars.size());
+                    });
+                    ASSERT_TRUE(ret.isOk());
+                }
             }
             break;
             case CAMERA_DEVICE_API_VERSION_1_0: {
@@ -2134,6 +2139,7 @@
     for (const auto& name : cameraDeviceNames) {
         int deviceVersion = getCameraDeviceVersion(name, mProviderType);
         switch (deviceVersion) {
+            case CAMERA_DEVICE_API_VERSION_3_5:
             case CAMERA_DEVICE_API_VERSION_3_4:
             case CAMERA_DEVICE_API_VERSION_3_3:
             case CAMERA_DEVICE_API_VERSION_3_2: {
@@ -2259,6 +2265,7 @@
     for (const auto& name : cameraDeviceNames) {
         int deviceVersion = getCameraDeviceVersion(name, mProviderType);
         switch (deviceVersion) {
+            case CAMERA_DEVICE_API_VERSION_3_5:
             case CAMERA_DEVICE_API_VERSION_3_4:
             case CAMERA_DEVICE_API_VERSION_3_3:
             case CAMERA_DEVICE_API_VERSION_3_2: {
@@ -2323,6 +2330,7 @@
     for (const auto& name : cameraDeviceNames) {
         int deviceVersion = getCameraDeviceVersion(name, mProviderType);
         switch (deviceVersion) {
+            case CAMERA_DEVICE_API_VERSION_3_5:
             case CAMERA_DEVICE_API_VERSION_3_4:
             case CAMERA_DEVICE_API_VERSION_3_3:
             case CAMERA_DEVICE_API_VERSION_3_2: {
@@ -2351,7 +2359,8 @@
                 sp<device::V3_3::ICameraDeviceSession> sessionV3_3;
                 sp<device::V3_4::ICameraDeviceSession> sessionV3_4;
                 castSession(session, deviceVersion, &sessionV3_3, &sessionV3_4);
-                if (deviceVersion == CAMERA_DEVICE_API_VERSION_3_4) {
+                if (deviceVersion == CAMERA_DEVICE_API_VERSION_3_4 ||
+                        deviceVersion == CAMERA_DEVICE_API_VERSION_3_5) {
                     ASSERT_TRUE(sessionV3_4.get() != nullptr);
                 } else if (deviceVersion == CAMERA_DEVICE_API_VERSION_3_3) {
                     ASSERT_TRUE(sessionV3_3.get() != nullptr);
@@ -2409,6 +2418,7 @@
     for (const auto& name : cameraDeviceNames) {
         int deviceVersion = getCameraDeviceVersion(name, mProviderType);
         switch (deviceVersion) {
+            case CAMERA_DEVICE_API_VERSION_3_5:
             case CAMERA_DEVICE_API_VERSION_3_4:
             case CAMERA_DEVICE_API_VERSION_3_3:
             case CAMERA_DEVICE_API_VERSION_3_2: {
@@ -4152,7 +4162,7 @@
 }
 
 // Check if the camera device has logical multi-camera capability.
-Status CameraHidlTest::isLogicalMultiCamera(camera_metadata_t *staticMeta) {
+Status CameraHidlTest::isLogicalMultiCamera(const camera_metadata_t *staticMeta) {
     Status ret = Status::METHOD_NOT_SUPPORTED;
     if (nullptr == staticMeta) {
         return Status::ILLEGAL_ARGUMENT;
@@ -4176,7 +4186,7 @@
 }
 
 // Generate a list of physical camera ids backing a logical multi-camera.
-Status CameraHidlTest::getPhysicalCameraIds(camera_metadata_t *staticMeta,
+Status CameraHidlTest::getPhysicalCameraIds(const camera_metadata_t *staticMeta,
         std::unordered_set<std::string> *physicalIds) {
     if ((nullptr == staticMeta) || (nullptr == physicalIds)) {
         return Status::ILLEGAL_ARGUMENT;
@@ -4649,6 +4659,7 @@
     ASSERT_NE(nullptr, session3_4);
 
     switch (deviceVersion) {
+        case CAMERA_DEVICE_API_VERSION_3_5:
         case CAMERA_DEVICE_API_VERSION_3_4: {
             auto castResult = device::V3_4::ICameraDeviceSession::castFrom(session);
             ASSERT_TRUE(castResult.isOk());
@@ -4667,6 +4678,101 @@
     }
 }
 
+// Verify logical camera static metadata
+void CameraHidlTest::verifyLogicalCameraMetadata(const std::string& cameraName,
+        const ::android::sp<::android::hardware::camera::device::V3_2::ICameraDevice>& device,
+        const CameraMetadata &chars, int deviceVersion,
+        const hidl_vec<hidl_string>& deviceNames) {
+    const camera_metadata_t* metadata = (camera_metadata_t*)chars.data();
+    ASSERT_NE(nullptr, metadata);
+
+    Status rc = isLogicalMultiCamera(metadata);
+    ASSERT_TRUE(Status::OK == rc || Status::METHOD_NOT_SUPPORTED == rc);
+    if (Status::METHOD_NOT_SUPPORTED == rc) {
+        return;
+    }
+
+    std::string version, cameraId;
+    ASSERT_TRUE(::matchDeviceName(cameraName, mProviderType, &version, &cameraId));
+    std::unordered_set<std::string> physicalIds;
+    ASSERT_TRUE(Status::OK == getPhysicalCameraIds(metadata, &physicalIds));
+    for (auto physicalId : physicalIds) {
+        ASSERT_NE(physicalId, cameraId);
+        bool isPublicId = false;
+        for (auto& deviceName : deviceNames) {
+            std::string publicVersion, publicId;
+            ASSERT_TRUE(::matchDeviceName(deviceName, mProviderType, &publicVersion, &publicId));
+            if (physicalId == publicId) {
+                isPublicId = true;
+                break;
+            }
+        }
+        if (isPublicId) {
+            continue;
+        }
+
+        ASSERT_TRUE(deviceVersion >= CAMERA_DEVICE_API_VERSION_3_5);
+        auto castResult = device::V3_5::ICameraDevice::castFrom(device);
+        ASSERT_TRUE(castResult.isOk());
+        ::android::sp<::android::hardware::camera::device::V3_5::ICameraDevice> device3_5 =
+                castResult;
+        ASSERT_NE(device3_5, nullptr);
+
+        // Check camera characteristics for hidden camera id
+        Return<void> ret = device3_5->getPhysicalCameraCharacteristics(physicalId,
+                [&](auto status, const auto& chars) {
+            verifyCameraCharacteristics(status, chars);
+        });
+        ASSERT_TRUE(ret.isOk());
+
+        // Check calling getCameraDeviceInterface_V3_x() on hidden camera id returns
+        // ILLEGAL_ARGUMENT.
+        std::stringstream s;
+        s << "device@" << version << "/" << mProviderType << "/" << physicalId;
+        hidl_string fullPhysicalId(s.str());
+        ret = mProvider->getCameraDeviceInterface_V3_x(fullPhysicalId,
+                [&](auto status, const auto& device3_x) {
+            ASSERT_EQ(Status::ILLEGAL_ARGUMENT, status);
+            ASSERT_EQ(device3_x, nullptr);
+        });
+        ASSERT_TRUE(ret.isOk());
+    }
+}
+
+void CameraHidlTest::verifyCameraCharacteristics(Status status, const CameraMetadata& chars) {
+    ASSERT_EQ(Status::OK, status);
+    const camera_metadata_t* metadata = (camera_metadata_t*)chars.data();
+    size_t expectedSize = chars.size();
+    int result = validate_camera_metadata_structure(metadata, &expectedSize);
+    ASSERT_TRUE((result == 0) || (result == CAMERA_METADATA_VALIDATION_SHIFTED));
+    size_t entryCount = get_camera_metadata_entry_count(metadata);
+    // TODO: we can do better than 0 here. Need to check how many required
+    // characteristics keys we've defined.
+    ASSERT_GT(entryCount, 0u);
+
+    camera_metadata_ro_entry entry;
+    int retcode = find_camera_metadata_ro_entry(metadata,
+            ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL, &entry);
+    if ((0 == retcode) && (entry.count > 0)) {
+        uint8_t hardwareLevel = entry.data.u8[0];
+        ASSERT_TRUE(
+                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED ||
+                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_FULL ||
+                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3 ||
+                hardwareLevel == ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL);
+    } else {
+        ADD_FAILURE() << "Get camera hardware level failed!";
+    }
+
+    entry.count = 0;
+    retcode = find_camera_metadata_ro_entry(metadata,
+            ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION, &entry);
+    if ((0 == retcode) || (entry.count > 0)) {
+        ADD_FAILURE() << "ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION "
+            << " per API contract should never be set by Hal!";
+    }
+}
+
 // Open a device session with empty callbacks and return static metadata.
 void CameraHidlTest::openEmptyDeviceSession(const std::string &name,
         sp<ICameraProvider> provider,
diff --git a/fastboot/1.0/IFastboot.hal b/fastboot/1.0/IFastboot.hal
index a96755e..dce3ad7 100644
--- a/fastboot/1.0/IFastboot.hal
+++ b/fastboot/1.0/IFastboot.hal
@@ -34,7 +34,7 @@
      * Executes a fastboot OEM command.
      *
      * @param oemCmdArgs The oem command that is passed to the fastboot HAL.
-     * @response result Returns the status SUCCESS if the operation is successful,
+     * @return result Returns the status SUCCESS if the operation is successful,
      *     INVALID_ARGUMENT for bad arguments,
      *     FAILURE_UNKNOWN for an invalid/unsupported command.
      */
@@ -44,8 +44,8 @@
      * Returns an OEM-defined string indicating the variant of the device, for
      * example, US and ROW.
      *
-     * @response variant Indicates the device variant.
-     * @response result Returns the status SUCCESS if the operation is successful,
+     * @return variant Indicates the device variant.
+     * @return result Returns the status SUCCESS if the operation is successful,
      *     FAILURE_UNKNOWN otherwise.
      */
     getVariant() generates (string variant, Result result);
@@ -54,9 +54,19 @@
      * Returns whether off-mode-charging is enabled. If enabled, the device
      * autoboots into a special mode when power is applied.
      *
-     * @response state Returns whether off mode charging is enabled.
-     * @response result Returns the status SUCCESS if the operation is successful,
+     * @return state Returns whether off mode charging is enabled.
+     * @return result Returns the status SUCCESS if the operation is successful,
      *     FAILURE_UNKNOWN otherwise.
      */
     getOffModeChargeState() generates (bool state, Result result);
+
+    /**
+     * Returns the minimum battery voltage required for flashing in mV.
+     *
+     * @return batteryVoltage Minimum batterery voltage (in mV) required for
+     *     flashing to be successful.
+     * @return result Returns the status SUCCESS if the operation is successful,
+     *     FAILURE_UNKNOWN otherwise.
+     */
+    getBatteryVoltageFlashingThreshold() generates (int32_t batteryVoltage, Result result);
 };
diff --git a/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2ReadbackTest.cpp b/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2ReadbackTest.cpp
index db4c914..da8858e 100644
--- a/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2ReadbackTest.cpp
+++ b/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2ReadbackTest.cpp
@@ -193,9 +193,6 @@
     }
 
     void TearDown() override {
-        mWriter->validateDisplay();
-        mWriter->presentDisplay();
-        execute();
         ASSERT_NO_FATAL_FAILURE(mComposerClient->setPowerMode(mPrimaryDisplay, PowerMode::OFF));
         EXPECT_EQ(0, mReader->mErrors.size());
         EXPECT_EQ(0, mReader->mCompositionChanges.size());
@@ -207,6 +204,11 @@
         VtsHalHidlTargetTestBase::TearDown();
     }
 
+    void clearCommandReaderState() {
+        mReader->mCompositionChanges.clear();
+        mReader->mErrors.clear();
+    }
+
     void execute() {
         ASSERT_NO_FATAL_FAILURE(mComposerClient->execute(mReader.get(), mWriter.get()));
     }
@@ -489,6 +491,7 @@
     // if hwc cannot handle and asks for composition change,
     // just succeed the test
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -533,6 +536,7 @@
     execute();
 
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -586,6 +590,7 @@
     execute();
 
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -760,6 +765,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -801,6 +807,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -864,6 +871,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -912,6 +920,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -962,6 +971,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -1094,6 +1104,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -1131,6 +1142,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -1164,6 +1176,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -1181,10 +1194,6 @@
    protected:
     void SetUp() override {
         GraphicsComposerReadbackTest::SetUp();
-        if (!mHasReadbackBuffer) {
-            GTEST_SUCCEED() << "Readback not supported or unsupported pixelFormat/dataspace";
-            return;
-        }
 
         mWriter->selectDisplay(mPrimaryDisplay);
         ASSERT_NO_FATAL_FAILURE(mComposerClient->setColorMode(mPrimaryDisplay, ColorMode::SRGB,
@@ -1222,6 +1231,10 @@
 };
 
 TEST_F(GraphicsComposerTransformReadbackTest, FLIP_H) {
+    if (!mHasReadbackBuffer) {
+        GTEST_SUCCEED() << "Readback not supported or unsupported pixelFormat/dataspace";
+        return;
+    }
     ReadbackBuffer readbackBuffer(mPrimaryDisplay, mComposerClient, mGralloc, mDisplayWidth,
                                   mDisplayHeight, mPixelFormat, mDataspace);
     ASSERT_NO_FATAL_FAILURE(readbackBuffer.setReadbackBuffer());
@@ -1237,6 +1250,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -1249,6 +1263,10 @@
 }
 
 TEST_F(GraphicsComposerTransformReadbackTest, FLIP_V) {
+    if (!mHasReadbackBuffer) {
+        GTEST_SUCCEED() << "Readback not supported or unsupported pixelFormat/dataspace";
+        return;
+    }
     ReadbackBuffer readbackBuffer(mPrimaryDisplay, mComposerClient, mGralloc, mDisplayWidth,
                                   mDisplayHeight, mPixelFormat, mDataspace);
     ASSERT_NO_FATAL_FAILURE(readbackBuffer.setReadbackBuffer());
@@ -1266,6 +1284,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
@@ -1277,6 +1296,10 @@
 }
 
 TEST_F(GraphicsComposerTransformReadbackTest, ROT_180) {
+    if (!mHasReadbackBuffer) {
+        GTEST_SUCCEED() << "Readback not supported or unsupported pixelFormat/dataspace";
+        return;
+    }
     ReadbackBuffer readbackBuffer(mPrimaryDisplay, mComposerClient, mGralloc, mDisplayWidth,
                                   mDisplayHeight, mPixelFormat, mDataspace);
     ASSERT_NO_FATAL_FAILURE(readbackBuffer.setReadbackBuffer());
@@ -1293,6 +1316,7 @@
     mWriter->validateDisplay();
     execute();
     if (mReader->mCompositionChanges.size() != 0) {
+        clearCommandReaderState();
         GTEST_SUCCEED();
         return;
     }
diff --git a/neuralnetworks/1.0/vts/OWNERS b/neuralnetworks/1.0/vts/OWNERS
index 87e322b..b5a8e1f 100644
--- a/neuralnetworks/1.0/vts/OWNERS
+++ b/neuralnetworks/1.0/vts/OWNERS
@@ -2,9 +2,14 @@
 butlermichael@google.com
 dgross@google.com
 jeanluc@google.com
+levp@google.com
 miaowang@google.com
 mikie@google.com
+mks@google.com
 pszczepaniak@google.com
+slavash@google.com
+vddang@google.com
+xusongw@google.com
 
 # VTS team
 yim@google.com
diff --git a/neuralnetworks/1.1/vts/OWNERS b/neuralnetworks/1.1/vts/OWNERS
index 87e322b..b5a8e1f 100644
--- a/neuralnetworks/1.1/vts/OWNERS
+++ b/neuralnetworks/1.1/vts/OWNERS
@@ -2,9 +2,14 @@
 butlermichael@google.com
 dgross@google.com
 jeanluc@google.com
+levp@google.com
 miaowang@google.com
 mikie@google.com
+mks@google.com
 pszczepaniak@google.com
+slavash@google.com
+vddang@google.com
+xusongw@google.com
 
 # VTS team
 yim@google.com
diff --git a/neuralnetworks/1.2/types.hal b/neuralnetworks/1.2/types.hal
index 4377131..bed1d5c 100644
--- a/neuralnetworks/1.2/types.hal
+++ b/neuralnetworks/1.2/types.hal
@@ -30,7 +30,7 @@
     ARGMAX = 38,
     ARGMIN = 39,
     PAD_V2 = 40,
-    BBOX_TRANSFORM = 41,
+    AXIS_ALIGNED_BBOX_TRANSFORM = 41,
     BIDIRECTIONAL_SEQUENCE_LSTM = 42,
     BIDIRECTIONAL_SEQUENCE_RNN = 43,
     BOX_WITH_NMS_LIMIT = 44,
@@ -76,6 +76,7 @@
     TRANSPOSE_CONV_2D = 84,
     UNIDIRECTIONAL_SEQUENCE_LSTM = 85,
     UNIDIRECTIONAL_SEQUENCE_RNN = 86,
+    ROTATED_BBOX_TRANSFORM = 87,
 };
 
 /**
diff --git a/neuralnetworks/1.2/vts/OWNERS b/neuralnetworks/1.2/vts/OWNERS
index 8f25436..b5a8e1f 100644
--- a/neuralnetworks/1.2/vts/OWNERS
+++ b/neuralnetworks/1.2/vts/OWNERS
@@ -8,6 +8,8 @@
 mks@google.com
 pszczepaniak@google.com
 slavash@google.com
+vddang@google.com
+xusongw@google.com
 
 # VTS team
 yim@google.com