diff --git a/camera/device/3.8/Android.bp b/camera/device/3.8/Android.bp
index 2a1f215..c3c2941 100644
--- a/camera/device/3.8/Android.bp
+++ b/camera/device/3.8/Android.bp
@@ -9,7 +9,6 @@
     default_applicable_licenses: ["hardware_interfaces_license"],
 }
 
-
 hidl_interface {
     name: "android.hardware.camera.device@3.8",
     root: "android.hardware",
@@ -17,6 +16,7 @@
         "types.hal",
         "ICameraDevice.hal",
         "ICameraDeviceCallback.hal",
+        "ICameraDeviceSession.hal",
     ],
     interfaces: [
         "android.hardware.camera.common@1.0",
@@ -31,6 +31,7 @@
         "android.hardware.camera.metadata@3.4",
         "android.hardware.camera.metadata@3.5",
         "android.hardware.camera.metadata@3.6",
+        "android.hardware.camera.metadata@3.8",
         "android.hardware.graphics.common@1.0",
         "android.hidl.base@1.0",
     ],
diff --git a/camera/device/3.8/ICameraDevice.hal b/camera/device/3.8/ICameraDevice.hal
index 1101819..8832c68 100644
--- a/camera/device/3.8/ICameraDevice.hal
+++ b/camera/device/3.8/ICameraDevice.hal
@@ -26,8 +26,8 @@
  * API at LIMITED or better hardware level.
  *
  * ICameraDevice.open() must return @3.2::ICameraDeviceSession,
- * @3.5::ICameraDeviceSession, @3.6::ICameraDeviceSession, or
- * @3.7::ICameraDeviceSession.
+ * @3.5::ICameraDeviceSession, @3.6::ICameraDeviceSession,
+ * @3.7::ICameraDeviceSession, or @3.8::ICameraDeviceSession.
  */
 interface ICameraDevice extends @3.7::ICameraDevice {
     /**
@@ -107,4 +107,15 @@
      *
      */
     getTorchStrengthLevel() generates (Status status, int32_t torchStrength);
+
+     /**
+     * isStreamCombinationSupported_3_8:
+     *
+     * Identical to @3.7::ICameraDevice.isStreamCombinationSupported, except
+     * that it takes a @3.8::StreamConfiguration parameter, which could contain
+     * additional information about a specific 10-bit dynamic range profile.
+     *
+     */
+    isStreamCombinationSupported_3_8(StreamConfiguration streams)
+            generates (Status status, bool queryStatus);
 };
diff --git a/camera/device/3.8/ICameraDeviceSession.hal b/camera/device/3.8/ICameraDeviceSession.hal
new file mode 100644
index 0000000..88e4338
--- /dev/null
+++ b/camera/device/3.8/ICameraDeviceSession.hal
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device@3.8;
+
+import android.hardware.camera.common@1.0::Status;
+import @3.5::StreamConfiguration;
+import @3.7::ICameraDeviceSession;
+import @3.6::HalStreamConfiguration;
+
+/**
+ * Camera device active session interface.
+ *
+ * Obtained via ICameraDevice::open(), this interface contains the methods to
+ * configure and request captures from an active camera device.
+ */
+interface ICameraDeviceSession extends @3.7::ICameraDeviceSession {
+    /**
+     * configureStreams_3_8:
+     *
+     * Identical to @3.7::ICameraDeviceSession.configureStreams_3_7, except that:
+     *
+     * - The requestedConfiguration allows the camera framework to configure
+     *   10-bit dynamic range profile.
+     *
+     * @return status Status code for the operation, one of:
+     *     OK:
+     *         On successful stream configuration.
+     *     INTERNAL_ERROR:
+     *         If there has been a fatal error and the device is no longer
+     *         operational. Only close() can be called successfully by the
+     *         framework after this error is returned.
+     *     ILLEGAL_ARGUMENT:
+     *         If the requested stream configuration is invalid. Some examples
+     *         of invalid stream configurations include:
+     *           - Including more than 1 INPUT stream
+     *           - Not including any OUTPUT streams
+     *           - Including streams with unsupported formats, or an unsupported
+     *             size for that format.
+     *           - Including too many output streams of a certain format.
+     *           - Unsupported rotation configuration
+     *           - Stream sizes/formats don't satisfy the
+     *             StreamConfigurationMode requirements
+     *             for non-NORMAL mode, or the requested operation_mode is not
+     *             supported by the HAL.
+     *           - Unsupported usage flag
+     *           - Unsupported stream groupIds, or unsupported multi-resolution
+     *             input stream.
+     *           - Invalid combination between a 10-bit dynamic range profile
+     *             and none impl. defined 8-bit format for a particular stream.
+     *         The camera service cannot filter out all possible illegal stream
+     *         configurations, since some devices may support more simultaneous
+     *         streams or larger stream resolutions than the minimum required
+     *         for a given camera device hardware level. The HAL must return an
+     *         ILLEGAL_ARGUMENT for any unsupported stream set, and then be
+     *         ready to accept a future valid stream configuration in a later
+     *         configureStreams call.
+     * @return halConfiguration The stream parameters desired by the HAL for
+     *     each stream, including maximum buffers, the usage flags, and the
+     *     override format and dataspace.
+     */
+    configureStreams_3_8(StreamConfiguration requestedConfiguration)
+        generates (Status status, @3.6::HalStreamConfiguration halConfiguration);
+
+    /**
+     * repeatingRequestEnd:
+     *
+     * Notification about the last frame number in a repeating request along with the
+     * ids of all streams included in the repeating request.
+     *
+     * This can be called at any point after 'processCaptureRequest' in response
+     * to camera clients disabling an active repeating request.
+     *
+     * Performance requirements:
+     * The call must not be blocked for extensive periods and should be extremely lightweight. There
+     * must be no frame rate degradation or frame jitter introduced.
+     *
+     * This method must always succeed, even if the device has encountered a
+     * serious error.
+     */
+    repeatingRequestEnd(uint32_t frameNumber, vec<int32_t> streamIds);
+};
diff --git a/camera/device/3.8/types.hal b/camera/device/3.8/types.hal
index 843d050..9d1ac22 100644
--- a/camera/device/3.8/types.hal
+++ b/camera/device/3.8/types.hal
@@ -19,6 +19,11 @@
 import @3.2::ErrorMsg;
 import @3.2::MsgType;
 import @3.2::ShutterMsg;
+import @3.2::CameraMetadata;
+import @3.2::StreamConfigurationMode;
+import @3.7::Stream;
+
+import android.hardware.camera.metadata@3.8::CameraMetadataEnumAndroidRequestAvailableDynamicRangeProfilesMap;
 
 /**
  * ShutterMsg:
@@ -67,3 +72,75 @@
         ShutterMsg shutter;
     } msg;
 };
+
+/**
+ * Stream:
+ *
+ * A descriptor for a single camera input or output stream. A stream is defined
+ * by the framework by its buffer resolution and format, and additionally by the
+ * HAL with the gralloc usage flags and the maximum in-flight buffer count.
+ *
+ * This version extends the @3.7 Stream with the dynamic range profile field.
+ */
+struct Stream {
+    /**
+     * The definition of Stream from the prior version.
+     */
+    @3.7::Stream v3_7;
+
+    /**
+     * The dynamic range profile for this stream.
+     *
+     * This field is valid and must only be considered for streams with format
+     * android.hardware.graphics.common.PixelFormat.YCBCR_P010 or
+     * android.hardware.graphics.common.PixelFormat.IMPLEMENTATION_DEFINED on devices supporting the
+     * ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DYNAMIC_RANGE_10_BIT capability.
+     *
+     */
+    CameraMetadataEnumAndroidRequestAvailableDynamicRangeProfilesMap dynamicRangeProfile;
+};
+
+/**
+ * StreamConfiguration:
+ *
+ * Identical to @3.7::StreamConfiguration, except that the streams
+ * vector contains @3.8::Stream.
+ */
+struct StreamConfiguration {
+    /**
+     * An array of camera stream pointers, defining the input/output
+     * configuration for the camera HAL device.
+     */
+    vec<Stream> streams;
+
+    /**
+     * The definition of operation mode from prior version.
+     *
+     */
+    @3.2::StreamConfigurationMode operationMode;
+
+    /**
+     * The definition of session parameters from prior version.
+     */
+    @3.2::CameraMetadata sessionParams;
+
+    /**
+     * The definition of stream configuration counter from prior version.
+     */
+    uint32_t streamConfigCounter;
+
+    /**
+     * If an input stream is configured, whether the input stream is expected to
+     * receive variable resolution images.
+     *
+     * This flag can only be set to true if the camera device supports
+     * multi-resolution input streams by advertising input stream configurations in
+     * physicalCameraMultiResolutionStreamConfigurations in its physical cameras'
+     * characteristics.
+     *
+     * When this flag is set to true, the input stream's width and height can be
+     * any one of the supported multi-resolution input stream sizes.
+     */
+    bool multiResolutionInputImage;
+};
+