Merge "Expose detailed data call end reasons"
diff --git a/radio/1.4/Android.bp b/radio/1.4/Android.bp
index 6257112..ad114f3 100644
--- a/radio/1.4/Android.bp
+++ b/radio/1.4/Android.bp
@@ -26,6 +26,8 @@
"CellConfigLte",
"CellInfo",
"CellInfoLte",
+ "DataCallFailCause",
+ "DataConnActiveStatus",
"DataProfileInfo",
"DataRegStateResult",
"EmergencyNumber",
@@ -34,12 +36,14 @@
"FrequencyRange",
"LteVopsInfo",
"NetworkScanResult",
+ "PdpProtocolType",
"PhysicalChannelConfig",
"RadioAccessFamily",
"RadioCapability",
"RadioFrequencyInfo",
"RadioTechnology",
"NrIndicators",
+ "SetupDataCallResult",
],
gen_java: true,
}
diff --git a/radio/1.4/IRadioIndication.hal b/radio/1.4/IRadioIndication.hal
index fac77f7..626b494 100644
--- a/radio/1.4/IRadioIndication.hal
+++ b/radio/1.4/IRadioIndication.hal
@@ -73,4 +73,18 @@
*/
oneway currentPhysicalChannelConfigs_1_4(RadioIndicationType type,
vec<PhysicalChannelConfig> configs);
-};
\ No newline at end of file
+
+ /**
+ * Indicates data call contexts have changed.
+ *
+ * @param type Type of radio indication
+ * @param dcList Array of SetupDataCallResult identical to that returned by
+ * IRadio.getDataCallList(). It is the complete list of current data contexts including
+ * new contexts that have been activated. A data call is only removed from this list
+ * when below conditions matched.
+ * 1. The framework sends a IRadio.deactivateDataCall().
+ * 2. The radio is powered off/on.
+ * 3. Unsolicited disconnect from either modem or network side.
+ */
+ oneway dataCallListChanged_1_4(RadioIndicationType type, vec<SetupDataCallResult> dcList);
+};
diff --git a/radio/1.4/IRadioResponse.hal b/radio/1.4/IRadioResponse.hal
index d9a2bad..df40969 100644
--- a/radio/1.4/IRadioResponse.hal
+++ b/radio/1.4/IRadioResponse.hal
@@ -127,4 +127,41 @@
* RadioError:CANCELLED
*/
oneway setPreferredNetworkTypeBitmapResponse(RadioResponseInfo info);
+
+ /**
+ * @param info Response info struct containing response type, serial no. and error
+ * @param dcResponse List of DataCallResult as defined in types.hal
+ *
+ * Valid errors returned:
+ * RadioError:NONE
+ * RadioError:RADIO_NOT_AVAILABLE
+ * RadioError:INTERNAL_ERR
+ * RadioError:NO_MEMORY
+ * RadioError:NO_RESOURCES
+ * RadioError:CANCELLED
+ * RadioError:REQUEST_NOT_SUPPORTED
+ * RadioError:SIM_ABSENT
+ */
+ oneway getDataCallListResponse_1_4(RadioResponseInfo info, vec<SetupDataCallResult> dcResponse);
+
+ /**
+ * @param info Response info struct containing response type, serial no. and error
+ * @param dcResponse SetupDataCallResult defined in types.hal
+ *
+ * Valid errors returned:
+ * RadioError:NONE must be returned on both success and failure of setup with the
+ * DataCallResponse.status containing the actual status
+ * For all other errors the DataCallResponse is ignored.
+ * RadioError:RADIO_NOT_AVAILABLE
+ * RadioError:OP_NOT_ALLOWED_BEFORE_REG_TO_NW
+ * RadioError:OP_NOT_ALLOWED_DURING_VOICE_CALL
+ * RadioError:REQUEST_NOT_SUPPORTED
+ * RadioError:INVALID_ARGUMENTS
+ * RadioError:INTERNAL_ERR
+ * RadioError:NO_MEMORY
+ * RadioError:NO_RESOURCES
+ * RadioError:CANCELLED
+ * RadioError:SIM_ABSENT
+ */
+ oneway setupDataCallResponse_1_4(RadioResponseInfo info, SetupDataCallResult dcResponse);
};
diff --git a/radio/1.4/types.hal b/radio/1.4/types.hal
index 9c4f08c..4f043ba 100644
--- a/radio/1.4/types.hal
+++ b/radio/1.4/types.hal
@@ -19,6 +19,7 @@
import @1.0::ApnAuthType;
import @1.0::ApnTypes;
import @1.0::CellInfoType;
+import @1.0::DataCallFailCause;
import @1.0::DataProfileId;
import @1.0::DataProfileInfoType;
import @1.0::RadioAccessFamily;
@@ -172,6 +173,1193 @@
MMWAVE = 4,
};
+/**
+ * Expose more setup data call failures.
+ */
+enum DataCallFailCause : @1.0::DataCallFailCause {
+ /**
+ * Network cannot provide the requested service and PDP context is deactivated because of LLC
+ * or SNDCP failure.
+ */
+ LLC_SNDCP = 0x19,
+ /**
+ * UE requested to modify QoS parameters or the bearer control mode, which is not compatible
+ * with the selected bearer control mode.
+ */
+ ACTIVATION_REJECTED_BCM_VIOLATION = 0x30,
+ /**
+ * Network has already initiated the activation, modification, or deactivation of bearer
+ * resources that was requested by the UE.
+ */
+ COLLISION_WITH_NW_INIT_REQ = 0x38,
+ /**
+ * Network supports IPv4v6 PDP type only. Non-IP type is not allowed. In LTE mode of operation,
+ * this is a PDN throttling cause code, meaning the UE may throttle further requests to the
+ * same APN.
+ */
+ ONLY_IPV4V6_ALLOWED = 0x39,
+ /**
+ * Network supports non-IP PDP type only. IPv4, IPv6 and IPv4v6 is not allowed. In LTE mode of
+ * operation, this is a PDN throttling cause code, meaning the UE can throttle further requests
+ * to the same APN.
+ */
+ ONLY_NON_IP_ALLOWED = 0x3A,
+ /**
+ * QCI indicated in the UE request cannot be supported.
+ */
+ UNSUPPORTED_QCI_VALUE = 0x3B,
+ /**
+ * Procedure requested by the UE was rejected because the bearer handling is not supported.
+ */
+ BEARER_HANDLING_NOT_SUPPORTED = 0x3C,
+ /**
+ * Not receiving a DNS address that was mandatory.
+ */
+ INVALID_DNS_ADDR = 0x7B,
+ /**
+ * Not receiving either a PCSCF or a DNS address, one of them being mandatory.
+ */
+ INVALID_PCSCF_DNS_ADDR = 0x7C,
+ /**
+ * Emergency call bring up on a different ePDG.
+ */
+ CALL_PREEMPT_BY_EMERGENCY_APN = 0x7F,
+ /**
+ * UE performs a detach or disconnect PDN action based on TE requirements.
+ */
+ UE_INIT_DETACH_OR_DISCONNECT = 0x80,
+
+ /**
+ * Reason unspecified for foreign agent rejected MIP registration.
+ */
+ MIP_FA_REASON_UNSPECIFIED = 0x7D0,
+ /**
+ * Foreign agent administratively prohibited MIP registration.
+ */
+ MIP_FA_ADMIN_PROHIBITED = 0x7D1,
+ /**
+ * Foreign agent rejected MIP registration because of insufficient resources.
+ */
+ MIP_FA_INSUFFICIENT_RESOURCES = 0x7D2,
+ /**
+ * Foreign agent rejected MIP registration because of MN-AAA authenticator was wrong.
+ */
+ MIP_FA_MOBILE_NODE_AUTH_FAILURE = 0x7D3,
+ /**
+ * Foreign agent rejected MIP registration because of home agent authentication failure.
+ */
+ MIP_FA_HA_AUTH_FAILURE = 0x7D4,
+ /**
+ * Foreign agent rejected MIP registration because of requested lifetime was too long.
+ */
+ MIP_FA_REQ_LIFETIME_TOO_LONG = 0x7D5,
+ /**
+ * Foreign agent rejected MIP registration because of malformed request.
+ */
+ MIP_FA_MALFORMED_REQUEST = 0x7D6,
+ /**
+ * Foreign agent rejected MIP registration because of malformed reply.
+ */
+ MIP_FA_MALFORMED_REPLY = 0x7D7,
+ /**
+ * Foreign agent rejected MIP registration because of requested encapsulation was unavailable.
+ */
+ MIP_FA_ENCAPSULATION_UNAVAILABLE = 0x7D8,
+ /**
+ * Foreign agent rejected MIP registration of VJ Header Compression was unavailable.
+ */
+ MIP_FA_VJHC_UNAVAILABLE = 0x7D9,
+ /**
+ * Foreign agent rejected MIP registration because of reverse tunnel was unavailable.
+ */
+ MIP_FA_REV_TUNNEL_UNAVAILABLE = 0x7DA,
+ /**
+ * Foreign agent rejected MIP registration because of reverse tunnel was mandatory but not
+ * requested by device.
+ */
+ MIP_FA_REV_TUNNEL_IS_MAND_AND_T_BIT_NOT_SET = 0x7DB,
+ /**
+ * Foreign agent rejected MIP registration because of delivery style was not supported.
+ */
+ MIP_FA_DELIVERY_STYLE_NOT_SUPP = 0x7DC,
+ /**
+ * Foreign agent rejected MIP registration because of missing NAI.
+ */
+ MIP_FA_MISSING_NAI = 0x7DD,
+ /**
+ * Foreign agent rejected MIP registration because of missing Home Agent.
+ */
+ MIP_FA_MISSING_HA = 0x7DE,
+ /**
+ * Foreign agent rejected MIP registration because of missing Home Address.
+ */
+ MIP_FA_MISSING_HOME_ADDR = 0x7DF,
+ /**
+ * Foreign agent rejected MIP registration because of unknown challenge.
+ */
+ MIP_FA_UNKNOWN_CHALLENGE = 0x7E0,
+ /**
+ * Foreign agent rejected MIP registration because of missing challenge.
+ */
+ MIP_FA_MISSING_CHALLENGE = 0x7E1,
+ /**
+ * Foreign agent rejected MIP registration because of stale challenge.
+ */
+ MIP_FA_STALE_CHALLENGE = 0x7E2,
+ /**
+ * Reason unspecified for home agent rejected MIP registration.
+ */
+ MIP_HA_REASON_UNSPECIFIED = 0x7E3,
+ /**
+ * Home agent administratively prohibited MIP registration.
+ */
+ MIP_HA_ADMIN_PROHIBITED = 0x7E4,
+ /**
+ * Home agent rejected MIP registration because of insufficient resources.
+ */
+ MIP_HA_INSUFFICIENT_RESOURCES = 0x7E5,
+ /**
+ * Home agent rejected MIP registration because of MN-HA authenticator was wrong.
+ */
+ MIP_HA_MOBILE_NODE_AUTH_FAILURE = 0x7E6,
+ /**
+ * Home agent rejected MIP registration because of foreign agent authentication failure.
+ */
+ MIP_HA_FA_AUTH_FAILURE = 0x7E7,
+ /**
+ * Home agent rejected MIP registration because of registration id mismatch.
+ */
+ MIP_HA_REGISTRATION_ID_MISMATCH = 0x7E8,
+ /**
+ * Home agent rejected MIP registration because of malformed request.
+ */
+ MIP_HA_MALFORMED_REQUEST = 0x7E9,
+ /**
+ * Home agent rejected MIP registration because of unknown home agent address.
+ */
+ MIP_HA_UNKNOWN_HA_ADDR = 0x7EA,
+ /**
+ * Home agent rejected MIP registration because of reverse tunnel was unavailable.
+ */
+ MIP_HA_REV_TUNNEL_UNAVAILABLE = 0x7EB,
+ /**
+ * Home agent rejected MIP registration because of reverse tunnel is mandatory but not
+ * requested by device.
+ */
+ MIP_HA_REV_TUNNEL_IS_MANDATORY_AND_T_BIT_NOT_SET = 0x7EC,
+ /**
+ * Home agent rejected MIP registration because of encapsulation unavailable.
+ */
+ MIP_HA_ENCAPSULATION_UNAVAILABLE = 0x7ED,
+ /**
+ * Tearing down is in progress.
+ */
+ CLOSE_IN_PROGRESS = 0x7EE,
+ /**
+ * Brought down by the network.
+ */
+ NW_INITIATED_TERMINATION = 0x7EF,
+ /**
+ * Another application in modem preempts the data call.
+ */
+ MODEM_APP_PREEMPTED = 0x7F0,
+ /**
+ * V4 PDN is in throttled state due to network providing only V6 address during the previous
+ * VSNCP bringup (subs_limited_to_v6).
+ */
+ ERR_PDN_IPV4_CALL_DISALLOWED = 0x7F1,
+ /**
+ * V4 PDN is in throttled state due to previous VSNCP bringup failure(s).
+ */
+ ERR_PDN_IPV4_CALL_THROTTLED = 0x7F2,
+ /**
+ * V6 PDN is in throttled state due to network providing only V4 address during the previous
+ * VSNCP bringup (subs_limited_to_v4).
+ */
+ ERR_PDN_IPV6_CALL_DISALLOWED = 0x7F3,
+ /**
+ * V6 PDN is in throttled state due to previous VSNCP bringup failure(s).
+ */
+ ERR_PDN_IPV6_CALL_THROTTLED = 0x7F4,
+ /**
+ * Modem restart.
+ */
+ MODEM_RESTART = 0x7F5,
+ /**
+ * PDP PPP calls are not supported.
+ */
+ PDP_PPP_NOT_SUPPORTED = 0x7F6,
+ /**
+ * RAT on which the data call is attempted/connected is no longer the preferred RAT.
+ */
+ UNPREFERRED_RAT = 0x7F7,
+ /**
+ * Physical link is in the process of cleanup.
+ */
+ PHYS_LINK_CLOSE_IN_PROGRESS = 0x7F8,
+ /**
+ * Interface bring up is attempted for an APN that is yet to be handed over to target RAT.
+ */
+ APN_PENDING_HANDOVER = 0x7F9,
+ /**
+ * APN bearer type in the profile does not match preferred network mode.
+ */
+ PROFILE_BEARER_INCOMPATIBLE = 0x7FA,
+ /**
+ * Card was refreshed or removed.
+ */
+ SIM_CARD_EVT = 0x7FB,
+ /**
+ * Device is going into lower power mode or powering down.
+ */
+ LPM_OR_PWR_DOWN = 0x7FC,
+ /**
+ * APN has been disabled.
+ */
+ APN_DISABLED = 0x7FD,
+ /**
+ * Maximum PPP inactivity timer expired.
+ */
+ MAX_PPP_INACTIVITY_TIMER_EXPIRED = 0x7FE,
+ /**
+ * IPv6 address transfer failed.
+ */
+ IPV6_ADDR_TRANSFER_FAILED = 0x7FF,
+ /**
+ * Target RAT swap failed.
+ */
+ TRAT_SWAP_FAILED = 0x800,
+ /**
+ * Device falls back from eHRPD to HRPD.
+ */
+ EHRPD_TO_HRPD_FALLBACK = 0x801,
+ /**
+ * UE is in MIP-only configuration but the MIP configuration fails on call bring up due to
+ * incorrect provisioning.
+ */
+ MIP_CONFIG_FAILURE = 0x802,
+ /**
+ * PDN inactivity timer expired due to no data transmission in a configurable duration of time.
+ */
+ PDN_INACTIVITY_TIMER_EXPIRED = 0x803,
+ /**
+ * IPv4 data call bring up is rejected because the UE already maintains the allotted maximum
+ * number of IPv4 data connections.
+ */
+ MAX_V4_CONNECTIONS = 0x804,
+ /**
+ * IPv6 data call bring up is rejected because the UE already maintains the allotted maximum
+ * number of IPv6 data connections.
+ */
+ MAX_V6_CONNECTIONS = 0x805,
+ /**
+ * New PDN bring up is rejected during interface selection because the UE has already allotted
+ * the available interfaces for other PDNs.
+ */
+ APN_MISMATCH = 0x806,
+ /**
+ * New call bring up is rejected since the existing data call IP type doesn't match the
+ * requested IP.
+ */
+ IP_VERSION_MISMATCH = 0x807,
+ /**
+ * Dial up networking (DUN) call bring up is rejected since UE is in eHRPD RAT.
+ */
+ DUN_CALL_DISALLOWED = 0x808,
+ /**
+ * Rejected/Brought down since UE is transition between EPC and NONEPC RAT.
+ */
+ INTERNAL_EPC_NONEPC_TRANSITION = 0x809,
+ /**
+ * The current interface is being in use.
+ */
+ IFACE_IN_USE = 0x80A,
+ /**
+ * PDN connection to the APN is disallowed on the roaming network.
+ */
+ APN_DISALLOWED_ON_ROAMING = 0x80C,
+ /**
+ * APN-related parameters are changed.
+ */
+ APN_PARAM_CHANGED = 0x80D,
+ /**
+ * PDN is attempted to be brought up with NULL APN but NULL APN is not supported.
+ */
+ NULL_APN_DISALLOWED = 0x80E,
+ /**
+ * Thermal level increases and causes calls to be torn down when normal mode of operation is
+ * not allowed.
+ */
+ THERMAL_MITIGATION = 0x80F,
+ /**
+ * PDN Connection to a given APN is disallowed because data is disabled from the device user
+ * interface settings.
+ */
+ DATA_SETTINGS_DISABLED = 0x810,
+ /**
+ * PDN Connection to a given APN is disallowed because data roaming is disabled from the device
+ * user interface settings and the UE is roaming.
+ */
+ DATA_ROAMING_SETTINGS_DISABLED = 0x811,
+ /**
+ * Default data subscription switch occurs.
+ */
+ DDS_CALL_ABORT = 0x812,
+ /**
+ * PDN being brought up with an APN that is part of forbidden APN Name list.
+ */
+ INVALID_APN_NAME = 0x813,
+ /**
+ * Default data subscription switch is in progress.
+ */
+ DDS_SWITCH_IN_PROGRESS = 0x814,
+ /**
+ * Roaming is disallowed during call bring up.
+ */
+ CALL_DISALLOWED_IN_ROAMING = 0x815,
+ /**
+ * UE is unable to bring up a non-IP data call because the device is not camped on a NB1 cell.
+ */
+ NON_IP_NOT_SUPPORTED = 0x816,
+ /**
+ * Non-IP PDN is in throttled state due to previous VSNCP bringup failure(s).
+ */
+ ERR_PDN_NON_IP_CALL_THROTTLED = 0x817,
+ /**
+ * Non-IP PDN is in disallowed state due to the network providing only an IP address.
+ */
+ ERR_PDN_NON_IP_CALL_DISALLOWED = 0x818,
+ /**
+ * Device in CDMA locked state.
+ */
+ CDMA_LOCK = 0x819,
+ /**
+ * Received an intercept order from the base station.
+ */
+ CDMA_INTERCEPT = 0x81A,
+ /**
+ * Receiving a reorder from the base station.
+ */
+ CDMA_REORDER = 0x81B,
+ /**
+ * Receiving a release from the base station with a SO Reject reason.
+ */
+ CDMA_REL_SO_REJ = 0x81C,
+ /**
+ * Receiving an incoming call from the base station.
+ */
+ CDMA_INCOM_CALL = 0x81D,
+ /**
+ * RL/FL fade or receiving a call release from the base station.
+ */
+ CDMA_ALERT_STOP = 0x81E,
+ /**
+ * Channel acquisition failures. This indicates that device has failed acquiring all the
+ * channels in the PRL.
+ */
+ CHANNEL_ACQUISITION_FAILURE = 0x81F,
+ /**
+ * Maximum access probes transmitted.
+ */
+ MAX_ACCESS_PROBE = 0x820,
+ /**
+ * Concurrent service is not supported by base station.
+ */
+ CCS_NOT_SUPPORTED_BY_BS = 0x821,
+ /**
+ * There was no response received from the base station.
+ */
+ NO_RESPONSE_FROM_BS = 0x822,
+ /**
+ * The base station rejecting the call.
+ */
+ REJECTED_BY_BS = 0x823,
+ /**
+ * The concurrent services requested were not compatible.
+ */
+ CCS_INCOMPATIBLE = 0x824,
+ /**
+ * Device does not have CDMA service.
+ */
+ NO_CDMA_SRV = 0x825,
+ /**
+ * RUIM not being present.
+ */
+ UIM_NOT_PRESENT = 0x826,
+ /**
+ * Receiving a retry order from the base station.
+ */
+ CDMA_RETRY_ORDER = 0x827,
+ /**
+ * Access blocked by the base station.
+ */
+ ACCESS_BLOCK = 0x828,
+ /**
+ * Access blocked by the base station for all mobile devices.
+ */
+ ACCESS_BLOCK_ALL = 0x829,
+ /**
+ * Maximum access probes for the IS-707B call.
+ */
+ IS707B_MAX_ACC = 0x82A,
+ /**
+ * Put device in thermal emergency.
+ */
+ THERMAL_EMERGENCY = 0x82B,
+ /**
+ * In favor of a voice call or SMS when concurrent voice and data are not supported.
+ */
+ CCS_NOT_ALLOWED = 0x82C,
+ /**
+ * The other clients rejected incoming call.
+ */
+ INCOM_REJ = 0x82D,
+ /**
+ * No service on the gateway.
+ */
+ NO_GATEWAY_SRV = 0x82E,
+ /**
+ * GPRS context is not available.
+ */
+ NO_GPRS_CONTEXT = 0x82F,
+ /**
+ * Network refuses service to the MS because either an identity of the MS is not acceptable to
+ * the network or the MS does not pass the authentication check.
+ */
+ ILLEGAL_MS = 0x830,
+ /**
+ * ME could not be authenticated and the ME used is not acceptable to the network.
+ */
+ ILLEGAL_ME = 0x831,
+ /**
+ * Not allowed to operate either GPRS or non-GPRS services.
+ */
+ GPRS_SERVICES_AND_NON_GPRS_SERVICES_NOT_ALLOWED = 0x832,
+ /**
+ * MS is not allowed to operate GPRS services.
+ */
+ GPRS_SERVICES_NOT_ALLOWED = 0x833,
+ /**
+ * No matching identity or context could be found in the network.
+ */
+ MS_IDENTITY_CANNOT_BE_DERIVED_BY_THE_NETWORK = 0x834,
+ /**
+ * Mobile reachable timer has expired, or the GMM context data related to the subscription dose
+ * not exist in the SGSN.
+ */
+ IMPLICITLY_DETACHED = 0x835,
+ /**
+ * UE requests GPRS service, or the network initiates a detach request in a PLMN which does not
+ * offer roaming for GPRS services to that MS.
+ */
+ PLMN_NOT_ALLOWED = 0x836,
+ /**
+ * MS requests service, or the network initiates a detach request, in a location area where the
+ * HPLMN determines that the MS, by subscription, is not allowed to operate.
+ */
+ LA_NOT_ALLOWED = 0x837,
+ /**
+ * UE requests GPRS service or the network initiates a detach request in a PLMN that does not
+ * offer roaming for GPRS services.
+ */
+ GPRS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN = 0x838,
+ /**
+ * PDP context already exists.
+ */
+ PDP_DUPLICATE = 0x839,
+ /**
+ * RAT change on the UE.
+ */
+ UE_RAT_CHANGE = 0x83A,
+ /**
+ * Network cannot serve a request from the MS due to congestion.
+ */
+ CONGESTION = 0x83B,
+ /**
+ * MS requests an establishment of the radio access bearers for all active PDP contexts by
+ * sending a service request message indicating data to the network, but the SGSN does not have
+ * any active PDP context.
+ */
+ NO_PDP_CONTEXT_ACTIVATED = 0x83C,
+ /**
+ * Access class blocking restrictions for the current camped cell.
+ */
+ ACCESS_CLASS_DSAC_REJECTION = 0x83D,
+ /**
+ * SM attempts PDP activation for a maximum of four attempts.
+ */
+ PDP_ACTIVATE_MAX_RETRY_FAILED = 0x83E,
+ /**
+ * Radio access bearer failure.
+ */
+ RAB_FAILURE = 0x83F,
+ /**
+ * Invalid EPS bearer identity in the request.
+ */
+ ESM_UNKNOWN_EPS_BEARER_CONTEXT = 0x840,
+ /**
+ * Data radio bearer is released by the RRC.
+ */
+ DRB_RELEASED_AT_RRC = 0x841,
+ /**
+ * Indicate the connection was released.
+ */
+ NAS_SIG_CONN_RELEASED = 0x842,
+ /**
+ * UE is detached.
+ */
+ EMM_DETACHED = 0x843,
+ /**
+ * Attach procedure is rejected by the network.
+ */
+ EMM_ATTACH_FAILED = 0x844,
+ /**
+ * Attach procedure is started for EMC purposes.
+ */
+ EMM_ATTACH_STARTED = 0x845,
+ /**
+ * Service request procedure failure.
+ */
+ LTE_NAS_SERVICE_REQ_FAILED = 0x846,
+ /**
+ * Active dedication bearer was requested using the same default bearer ID.
+ */
+ ESM_ACTIVE_DEDICATED_BEARER_REACTIVATED_BY_NW = 0x847,
+ /**
+ * Collision scenarios for the UE and network-initiated procedures.
+ */
+ ESM_LOWER_LAYER_FAILURE = 0x848,
+ /**
+ * Bearer must be deactivated to synchronize with the network.
+ */
+ ESM_SYNC_UP_WITH_NW = 0x849,
+ /**
+ * Active dedication bearer was requested for an existing default bearer.
+ */
+ ESM_NW_ACTIVATED_DED_BEARER_WITH_ID_OF_DEF_BEARER = 0x84A,
+ /**
+ * Bad OTA message is received from the network.
+ */
+ ESM_BAD_OTA_MESSAGE = 0x84B,
+ /**
+ * Download server rejected the call.
+ */
+ ESM_DS_REJECTED_THE_CALL = 0x84C,
+ /**
+ * PDN was disconnected by the downlaod server due to IRAT.
+ */
+ ESM_CONTEXT_TRANSFERED_DUE_TO_IRAT = 0x84D,
+ /**
+ * Dedicated bearer will be deactivated regardless of the network response.
+ */
+ DS_EXPLICIT_DEACT = 0x84E,
+ /**
+ * No specific local cause is mentioned, usually a valid OTA cause.
+ */
+ ESM_LOCAL_CAUSE_NONE = 0x84F,
+ /**
+ * Throttling is not needed for this service request failure.
+ */
+ LTE_NAS_SERVICE_REQ_FAILED_NO_THROTTLE = 0x850,
+ /**
+ * Access control list check failure at the lower layer.
+ */
+ ACCESS_CONTROL_LIST_CHECK_FAILURE = 0x851,
+ /**
+ * Service is not allowed on the requested PLMN.
+ */
+ LTE_NAS_SERVICE_REQ_FAILED_DS_DISALLOW = 0x852,
+ /**
+ * T3417 timer expiration of the service request procedure.
+ */
+ EMM_T3417_EXPIRED = 0x853,
+ /**
+ * Extended service request fails due to expiration of the T3417 EXT timer.
+ */
+ EMM_T3417_EXT_EXPIRED = 0x854,
+ /**
+ * Transmission failure of uplink data.
+ */
+ LRRC_UL_DATA_CNF_FAILURE_TXN = 0x855,
+ /**
+ * Uplink data delivery failed due to a handover.
+ */
+ LRRC_UL_DATA_CNF_FAILURE_HO = 0x856,
+ /**
+ * Uplink data delivery failed due to a connection release.
+ */
+ LRRC_UL_DATA_CNF_FAILURE_CONN_REL = 0x857,
+ /**
+ * Uplink data delivery failed due to a radio link failure.
+ */
+ LRRC_UL_DATA_CNF_FAILURE_RLF = 0x858,
+ /**
+ * RRC is not connected but the NAS sends an uplink data request.
+ */
+ LRRC_UL_DATA_CNF_FAILURE_CTRL_NOT_CONN = 0x859,
+ /**
+ * Connection failure at access stratum.
+ */
+ LRRC_CONN_EST_FAILURE = 0x85A,
+ /**
+ * Connection establishment is aborted due to another procedure.
+ */
+ LRRC_CONN_EST_FAILURE_ABORTED = 0x85B,
+ /**
+ * Connection establishment failed due to a lower layer RRC connection failure.
+ */
+ LRRC_CONN_EST_FAILURE_ACCESS_BARRED = 0x85C,
+ /**
+ * Connection establishment failed due to cell reselection at access stratum.
+ */
+ LRRC_CONN_EST_FAILURE_CELL_RESEL = 0x85D,
+ /**
+ * Connection establishment failed due to configuration failure at the RRC.
+ */
+ LRRC_CONN_EST_FAILURE_CONFIG_FAILURE = 0x85E,
+ /**
+ * Connection could not be established in the time limit.
+ */
+ LRRC_CONN_EST_FAILURE_TIMER_EXPIRED = 0x85F,
+ /**
+ * Connection establishment failed due to a link failure at the RRC.
+ */
+ LRRC_CONN_EST_FAILURE_LINK_FAILURE = 0x860,
+ /**
+ * Connection establishment failed as the RRC is not camped on any cell.
+ */
+ LRRC_CONN_EST_FAILURE_NOT_CAMPED = 0x861,
+ /**
+ * Connection establishment failed due to a service interval failure at the RRC.
+ */
+ LRRC_CONN_EST_FAILURE_SI_FAILURE = 0x862,
+ /**
+ * Connection establishment failed due to the network rejecting the UE connection request.
+ */
+ LRRC_CONN_EST_FAILURE_CONN_REJECT = 0x863,
+ /**
+ * Normal connection release.
+ */
+ LRRC_CONN_REL_NORMAL = 0x864,
+ /**
+ * Connection release failed due to radio link failure conditions.
+ */
+ LRRC_CONN_REL_RLF = 0x865,
+ /**
+ * Connection reestablishment failure.
+ */
+ LRRC_CONN_REL_CRE_FAILURE = 0x866,
+ /**
+ * UE is out of service during the call register.
+ */
+ LRRC_CONN_REL_OOS_DURING_CRE = 0x867,
+ /**
+ * Connection has been released by the RRC due to an abort request.
+ */
+ LRRC_CONN_REL_ABORTED = 0x868,
+ /**
+ * Connection released due to a system information block read error.
+ */
+ LRRC_CONN_REL_SIB_READ_ERROR = 0x869,
+ /**
+ * Network-initiated detach with reattach.
+ */
+ DETACH_WITH_REATTACH_LTE_NW_DETACH = 0x86A,
+ /**
+ * Network-initiated detach without reattach.
+ */
+ DETACH_WITHOUT_REATTACH_LTE_NW_DETACH = 0x86B,
+ /**
+ * ESM procedure maximum attempt timeout failure.
+ */
+ ESM_PROC_TIME_OUT = 0x86C,
+ /**
+ * No PDP exists with the given connection ID while modifying or deactivating or activation for
+ * an already active PDP.
+ */
+ INVALID_CONNECTION_ID = 0x86D,
+ /**
+ * Maximum NSAPIs have been exceeded during PDP activation.
+ */
+ INVALID_NSAPI = 0x86E,
+ /**
+ * Primary context for NSAPI does not exist.
+ */
+ INVALID_PRI_NSAPI = 0x86F,
+ /**
+ * Unable to encode the OTA message for MT PDP or deactivate PDP.
+ */
+ INVALID_FIELD = 0x870,
+ /**
+ * Radio access bearer is not established by the lower layers during activation, modification,
+ * or deactivation.
+ */
+ RAB_SETUP_FAILURE = 0x871,
+ /**
+ * Expiration of the PDP establish timer with a maximum of five retries.
+ */
+ PDP_ESTABLISH_MAX_TIMEOUT = 0x872,
+ /**
+ * Expiration of the PDP modify timer with a maximum of four retries.
+ */
+ PDP_MODIFY_MAX_TIMEOUT = 0x873,
+ /**
+ * Expiration of the PDP deactivate timer with a maximum of four retries.
+ */
+ PDP_INACTIVE_MAX_TIMEOUT = 0x874,
+ /**
+ * PDP activation failed due to RRC_ABORT or a forbidden PLMN.
+ */
+ PDP_LOWERLAYER_ERROR = 0x875,
+ /**
+ * MO PDP modify collision when the MT PDP is already in progress.
+ */
+ PDP_MODIFY_COLLISION = 0x876,
+ /**
+ * Radio resource is not available.
+ */
+ SM_NO_RADIO_AVAILABLE = 0x877,
+ /**
+ * Abort due to service not available.
+ */
+ SM_ABORT_SERVICE_NOT_AVAILABLE = 0x878,
+ /**
+ * Maximum size of the L2 message was exceeded.
+ */
+ MESSAGE_EXCEED_MAX_L2_LIMIT = 0x879,
+ /**
+ * NAS request was rejected by the network.
+ */
+ SM_NAS_SRV_REQ_FAILURE = 0x87A,
+ /**
+ * RRC connection establishment failure due to an error in the request message.
+ */
+ RRC_CONN_EST_FAILURE_REQ_ERROR = 0x87B,
+ /**
+ * RRC connection establishment failure due to a change in the tracking area ID.
+ */
+ RRC_CONN_EST_FAILURE_TAI_CHANGE = 0x87C,
+ /**
+ * RRC connection establishment failure because the RF was unavailable.
+ */
+ RRC_CONN_EST_FAILURE_RF_UNAVAILABLE = 0x87D,
+ /**
+ * Connection was aborted before deactivating the LTE stack due to a successful LX IRAT.
+ * (e.g., after IRAT handovers)
+ */
+ RRC_CONN_REL_ABORTED_IRAT_SUCCESS = 0x87E,
+ /**
+ * If the UE has an LTE radio link failure before security is established, the connection must
+ * be released and the UE must return to idle.
+ */
+ RRC_CONN_REL_RLF_SEC_NOT_ACTIVE = 0x87F,
+ /**
+ * Connection was aborted by the NAS after an IRAT to LTE IRAT handover.
+ */
+ RRC_CONN_REL_IRAT_TO_LTE_ABORTED = 0x880,
+ /**
+ * Connection was aborted before deactivating the LTE stack after a successful LR IRAT cell
+ * change order procedure.
+ */
+ RRC_CONN_REL_IRAT_FROM_LTE_TO_G_CCO_SUCCESS = 0x881,
+ /**
+ * Connection was aborted in the middle of a LG IRAT cell change order.
+ */
+ RRC_CONN_REL_IRAT_FROM_LTE_TO_G_CCO_ABORTED = 0x882,
+ /**
+ * IMSI present in the UE is unknown in the home subscriber server.
+ */
+ IMSI_UNKNOWN_IN_HSS = 0x883,
+ /**
+ * IMEI of the UE is not accepted by the network.
+ */
+ IMEI_NOT_ACCEPTED = 0x884,
+ /**
+ * EPS and non-EPS services are not allowed by the network.
+ */
+ EPS_SERVICES_AND_NON_EPS_SERVICES_NOT_ALLOWED = 0x885,
+ /**
+ * EPS services are not allowed in the PLMN.
+ */
+ EPS_SERVICES_NOT_ALLOWED_IN_PLMN = 0x886,
+ /**
+ * Mobile switching center is temporarily unreachable.
+ */
+ MSC_TEMPORARILY_NOT_REACHABLE = 0x887,
+ /**
+ * CS domain is not available.
+ */
+ CS_DOMAIN_NOT_AVAILABLE = 0x888,
+ /**
+ * ESM level failure.
+ */
+ ESM_FAILURE = 0x889,
+ /**
+ * MAC level failure.
+ */
+ MAC_FAILURE = 0x88A,
+ /**
+ * Synchronization failure.
+ */
+ SYNCH_FAILURE = 0x88B,
+ /**
+ * UE security capabilities mismatch.
+ */
+ UE_SECURITY_CAPABILITIES_MISMATCH = 0x88C,
+ /**
+ * Unspecified security mode reject.
+ */
+ SECURITY_MODE_REJ_UNSPECIFIED = 0x88D,
+ /**
+ * Unacceptable non-EPS authentication.
+ */
+ NON_EPS_AUTH_UNACCEPTABLE = 0x88E,
+ /**
+ * CS fallback call establishment is not allowed.
+ */
+ CS_FALLBACK_CALL_EST_NOT_ALLOWED = 0x88F,
+ /**
+ * No EPS bearer context was activated.
+ */
+ NO_EPS_BEARER_CONTEXT_ACTIVATED = 0x890,
+ /**
+ * Invalid EMM state.
+ */
+ EMM_INVALID_STATE = 0x891,
+ /**
+ * Non-Access Spectrum layer failure.
+ */
+ NAS_LAYER_FAILURE = 0x892,
+ /**
+ * Multiple PDP call feature is disabled.
+ */
+ MULTI_PDN_NOT_ALLOWED = 0x893,
+ /**
+ * Data call has been brought down because EMBMS is not enabled at the RRC layer.
+ */
+ EMBMS_NOT_ENABLED = 0x894,
+ /**
+ * Data call was unsuccessfully transferred during the IRAT handover.
+ */
+ PENDING_REDIAL_CALL_CLEANUP = 0x895,
+ /**
+ * EMBMS data call has been successfully brought down.
+ */
+ EMBMS_REGULAR_DEACTIVATION = 0x896,
+ /**
+ * Test loop-back data call has been successfully brought down.
+ */
+ TLB_REGULAR_DEACTIVATION = 0x897,
+ /**
+ * Lower layer registration failure.
+ */
+ LOWER_LAYER_REGISTRATION_FAILURE = 0x898,
+ /**
+ * Network initiates a detach on LTE with error cause ""data plan has been replenished or has
+ * expired.
+ */
+ DETACH_EPS_SERVICES_NOT_ALLOWED = 0x899,
+ /**
+ * UMTS interface is brought down due to handover from UMTS to iWLAN.
+ */
+ SM_INTERNAL_PDP_DEACTIVATION = 0x89A,
+ /**
+ * The reception of a connection deny message with a deny code of general or network busy.
+ */
+ CD_GEN_OR_BUSY = 0x89B,
+ /**
+ * The reception of a connection deny message with a deny code of billing failure or
+ * authentication failure.
+ */
+ CD_BILL_OR_AUTH = 0x89C,
+ /**
+ * HDR system has been changed due to redirection or the PRL was not preferred.
+ */
+ HDR_CHANGED = 0x89D,
+ /**
+ * Device exited HDR due to redirection or the PRL was not preferred.
+ */
+ HDR_EXITED = 0x89E,
+ /**
+ * Device does not have an HDR session.
+ */
+ HDR_NO_SESSION = 0x89F,
+ /**
+ * It is ending an HDR call origination in favor of a GPS fix.
+ */
+ HDR_ORIG_DURING_GPS_FIX = 0x8A0,
+ /**
+ * Connection setup on the HDR system was time out.
+ */
+ HDR_CS_TIMEOUT = 0x8A1,
+ /**
+ * Device failed to acquire a co-located HDR for origination.
+ */
+ COLLOC_ACQ_FAIL = 0x8A2,
+ /**
+ * OTASP commit is in progress.
+ */
+ OTASP_COMMIT_IN_PROG = 0x8A3,
+ /**
+ * Device has no hybrid HDR service.
+ */
+ NO_HYBR_HDR_SRV = 0x8A4,
+ /**
+ * HDR module could not be obtained because of the RF locked.
+ */
+ HDR_NO_LOCK_GRANTED = 0x8A5,
+ /**
+ * DBM or SMS is in progress.
+ */
+ HOLD_OTHER_IN_PROG = 0x8A6,
+ /**
+ * HDR module released the call due to fade.
+ */
+ HDR_FADE = 0x8A7,
+ /**
+ * HDR system access failure.
+ */
+ HDR_ACC_FAIL = 0x8A8,
+ /**
+ * P_rev supported by 1 base station is less than 6, which is not supported for a 1X data call.
+ * The UE must be in the footprint of BS which has p_rev >= 6 to support this SO33 call.
+ */
+ UNSUPPORTED_1X_PREV = 0x8A9,
+ /**
+ * Client ended the data call.
+ */
+ LOCAL_END = 0x8AA,
+ /**
+ * Device has no service.
+ */
+ NO_SRV = 0x8AB,
+ /**
+ * Device lost the system due to fade.
+ */
+ FADE = 0x8AC,
+ /**
+ * Receiving a release from the base station with no reason.
+ */
+ REL_NORMAL = 0x8AD,
+ /**
+ * Access attempt is already in progress.
+ */
+ ACC_IN_PROG = 0x8AE,
+ /**
+ * Access failure.
+ */
+ ACC_FAIL = 0x8AF,
+ /**
+ * Device is in the process of redirecting or handing off to a different target system.
+ */
+ REDIR_OR_HANDOFF = 0x8B0,
+ /**
+ * Device is operating in Emergency mode.
+ */
+ EMERGENCY_MODE = 0x8B1,
+ /**
+ * Device is in use (e.g., voice call).
+ */
+ PHONE_IN_USE = 0x8B2,
+ /**
+ * Device operational mode is different from the mode requested in the traffic channel bring up
+ */
+ INVALID_MODE = 0x8B3,
+ /**
+ * SIM was marked by the network as invalid for the circuit and/or packet service domain.
+ */
+ INVALID_SIM_STATE = 0x8B4,
+ /**
+ * There is no co-located HDR.
+ */
+ NO_COLLOC_HDR = 0x8B5,
+ /**
+ * UE is entering power save mode.
+ */
+ EMM_DETACHED_PSM = 0x8B6,
+ /**
+ * Dual switch from single standby to dual standby is in progress.
+ */
+ DUAL_SWITCH = 0x8B7,
+ /**
+ * Data call bring up fails in the PPP setup due to a timeout.
+ * (e.g., an LCP conf ack was not received from the network)
+ */
+ PPP_TIMEOUT = 0x8B8,
+ /**
+ * Data call bring up fails in the PPP setup due to an authorization failure.
+ * (e.g., authorization is required, but not negotiated with the network during an LCP phase)
+ */
+ PPP_AUTH_FAILURE = 0x8B9,
+ /**
+ * Data call bring up fails in the PPP setup due to an option mismatch.
+ */
+ PPP_OPTION_MISMATCH = 0x8BA,
+ /**
+ * Data call bring up fails in the PPP setup due to a PAP failure.
+ */
+ PPP_PAP_FAILURE = 0x8BB,
+ /**
+ * Data call bring up fails in the PPP setup due to a CHAP failure.
+ */
+ PPP_CHAP_FAILURE = 0x8BC,
+ /**
+ * Data call bring up fails in the PPP setup because the PPP is in the process of cleaning the
+ * previous PPP session.
+ */
+ PPP_ERR_CLOSE_IN_PROGRESS = 0x8BD,
+ /**
+ * IPv6 interface bring up fails because the network provided only the IPv4 address for the
+ * upcoming PDN permanent client can reattempt a IPv6 call bring up after the IPv4 interface is
+ * also brought down. However, there is no guarantee that the network will provide a IPv6
+ * address.
+ */
+ EHRPD_SUBS_LIMITED_TO_V4 = 0x8BE,
+ /**
+ * IPv4 interface bring up fails because the network provided only the IPv6 address for the
+ * upcoming PDN permanent client can reattempt a IPv4 call bring up after the IPv6 interface is
+ * also brought down. However there is no guarantee that the network will provide a IPv4
+ * address.
+ */
+ EHRPD_SUBS_LIMITED_TO_V6 = 0x8BF,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a VSNCP timeout error.
+ */
+ EHRPD_VSNCP_TIMEOUT = 0x8C0,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a general error
+ */
+ EHRPD_VSNCP_GEN_ERROR = 0x8C1,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request because the requested APN is unauthorized.
+ */
+ EHRPD_VSNCP_UNAUTH_APN = 0x8C2,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request because the PDN limit has been exceeded.
+ */
+ EHRPD_VSNCP_PDN_LIMIT_EXCEED = 0x8C3,
+ /**
+ * Data call bring up fails in the VSNCP phase because the network rejected the VSNCP
+ * configuration request due to no PDN gateway.
+ */
+ EHRPD_VSNCP_NO_PDN_GW = 0x8C4,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request because the PDN gateway is unreachable.
+ */
+ EHRPD_VSNCP_PDN_GW_UNREACH = 0x8C5,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request due to a PDN gateway reject.
+ */
+ EHRPD_VSNCP_PDN_GW_REJ = 0x8C6,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request with the reason of insufficient parameter.
+ */
+ EHRPD_VSNCP_INSUFF_PARAM = 0x8C7,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request with the reason of resource unavailable.
+ */
+ EHRPD_VSNCP_RESOURCE_UNAVAIL = 0x8C8,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request with the reason of admin prohibited.
+ */
+ EHRPD_VSNCP_ADMIN_PROHIBIT = 0x8C9,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of PDN ID in use, or
+ * all existing PDNs are brought down with this end reason because one of the PDN bring up was
+ * rejected by the network with the reason of PDN ID in use.
+ */
+ EHRPD_VSNCP_PDN_ID_IN_USE = 0x8CA,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request for the reason of subscriber limitation.
+ */
+ EHRPD_VSNCP_SUBSCR_LIMITATION = 0x8CB,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request because the PDN exists for this APN.
+ */
+ EHRPD_VSNCP_PDN_EXISTS_FOR_THIS_APN = 0x8CC,
+ /**
+ * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+ * configuration request with reconnect to this PDN not allowed, or an active data call is
+ * terminated by the network because reconnection to this PDN is not allowed. Upon receiving
+ * this error code from the network, the modem infinitely throttles the PDN until the next
+ * power cycle.
+ */
+ EHRPD_VSNCP_RECONNECT_NOT_ALLOWED = 0x8CD,
+ /**
+ * Device failure to obtain the prefix from the network.
+ */
+ IPV6_PREFIX_UNAVAILABLE = 0x8CE,
+ /**
+ * System preference change back to SRAT during handoff
+ */
+ HANDOFF_PREF_SYS_BACK_TO_SRAT = 0x8CF,
+};
+
+/**
+ * Data connection active status
+ */
+enum DataConnActiveStatus : int32_t {
+ /**
+ * Indicates the data connection is inactive.
+ */
+ INACTIVE = 0,
+ /**
+ * Indicates the data connection is active with physical link dormant.
+ */
+ DORMANT = 1,
+ /**
+ * Indicates the data connection is active with physical link up.
+ */
+ ACTIVE = 2,
+};
+
+/**
+ * Specifies the type of packet data protocol which is defined in TS 27.007 section 10.1.1.
+ */
+enum PdpProtocolType : int32_t {
+ /**
+ * Unknown protocol
+ */
+ UNKNOWN = -1,
+ /**
+ * Internet protocol
+ */
+ IP = 0,
+ /**
+ * Internet protocol, version 6
+ */
+ IPV6 = 1,
+ /**
+ * Virtual PDP type introduced to handle dual IP stack UE capability.
+ */
+ IPV4V6 = 2,
+ /**
+ * Point to point protocol
+ */
+ PPP = 3,
+ /**
+ * Transfer of Non-IP data to external packet data network
+ */
+ NON_IP = 4,
+ /**
+ * Ethernet protocol
+ */
+ ETHERNET = 5,
+ /**
+ * Transfer of Unstructured data to the Data Network via N6
+ */
+ UNSTRUCTURED = 6,
+};
+
safe_union RadioFrequencyInfo {
/** A rough frequency range. */
FrequencyRange range;
@@ -191,7 +1379,7 @@
/**
* A list of data calls mapped to this physical channel. The context id must match the cid of
- * @1.0::SetupDataCallResult. An empty list means the physical channel has no data call mapped
+ * @1.4::SetupDataCallResult. An empty list means the physical channel has no data call mapped
* to it.
*/
vec<int32_t> contextIds;
@@ -354,17 +1542,11 @@
/** The APN name */
string apn;
- /**
- * One of the PDP_type values in TS 27.007 section 10.1.1. For example, "IP", "IPV6", "IPV4V6",
- * or "PPP".
- */
- string protocol;
+ /** PDP_type values */
+ PdpProtocolType protocol;
- /**
- * one of the PDP_type values in TS 27.007 section 10.1.1 used on roaming network. For example,
- * "IP", "IPV6", "IPV4V6", or "PPP".
- */
- string roamingProtocol;
+ /** PDP_type values used on roaming network */
+ PdpProtocolType roamingProtocol;
/** APN authentication type */
ApnAuthType authType;
@@ -446,3 +1628,68 @@
RadioCapabilityStatus status;
};
+
+/**
+ * Overwritten from @1.0::SetupDataCallResult in order to update the DataCallFailCause to 1.4
+ * version.
+ */
+struct SetupDataCallResult {
+ /** Data call fail cause. DataCallFailCause.NONE if no error. */
+ DataCallFailCause cause;
+
+ /**
+ * If status != DataCallFailCause.NONE, this field indicates the suggested retry back-off timer
+ * value RIL wants to override the one pre-configured in FW. The unit is milliseconds.
+ * The value < 0 means no value is suggested.
+ * The value 0 means retry must be done ASAP.
+ * The value of INT_MAX(0x7fffffff) means no retry.
+ */
+ int32_t suggestedRetryTime;
+
+ /** Context ID, uniquely identifies this call. */
+ int32_t cid;
+
+ /** Data connection active status. */
+ DataConnActiveStatus active;
+
+ /**
+ * PDP_type values. If cause is DataCallFailCause.ONLY_SINGLE_BEARER_ALLOWED, this is the type
+ * supported such as "IP" or "IPV6".
+ */
+ PdpProtocolType type;
+
+ /** The network interface name. */
+ string ifname;
+
+ /**
+ * List of addresses with optional "/" prefix length, e.g., "192.0.1.3" or
+ * "192.0.1.11/16 2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If the
+ * prefix length is absent the addresses are assumed to be point to point with IPv4 having a
+ * prefix length of 32 and IPv6 128.
+ */
+ vec<string> addresses;
+
+ /**
+ * List of DNS server addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". Empty if no dns
+ * server addresses returned.
+ */
+ vec<string> dnses;
+
+ /**
+ * List of default gateway addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+ * When empty, the addresses represent point to point connections.
+ */
+ vec<string> gateways;
+
+ /**
+ * List of P-CSCF(Proxy Call State Control Function) addresses via PCO(Protocol Configuration
+ * Option), e.g., "2001:db8::1 2001:db8::2 2001:db8::3". Empty if not IMS client.
+ */
+ vec<string> pcscf;
+
+ /**
+ * MTU received from network. Value <= 0 means network has either not sent a value or sent an
+ * invalid value.
+ */
+ int32_t mtu;
+};