diff --git a/usb/aidl/vts/Android.bp b/usb/aidl/vts/Android.bp
new file mode 100644
index 0000000..00a7c93
--- /dev/null
+++ b/usb/aidl/vts/Android.bp
@@ -0,0 +1,43 @@
+//
+// Copyright (C) 2021 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_test {
+    name: "VtsAidlUsbTargetTest",
+    defaults: [
+        "VtsHalTargetTestDefaults",
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: ["VtsAidlUsbTargetTest.cpp"],
+    shared_libs: [
+        "libbinder_ndk",
+    ],
+    static_libs: [
+        "android.hardware.usb-V1-ndk",
+    ],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+}
diff --git a/usb/aidl/vts/VtsAidlUsbTargetTest.cpp b/usb/aidl/vts/VtsAidlUsbTargetTest.cpp
new file mode 100644
index 0000000..09cb096
--- /dev/null
+++ b/usb/aidl/vts/VtsAidlUsbTargetTest.cpp
@@ -0,0 +1,424 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Probject
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "UsbAidlTest"
+#include <android-base/logging.h>
+
+#include <aidl/android/hardware/usb/IUsb.h>
+#include <aidl/android/hardware/usb/IUsbCallback.h>
+#include <aidl/android/hardware/usb/BnUsbCallback.h>
+#include <aidl/android/hardware/usb/PortDataRole.h>
+#include <aidl/android/hardware/usb/PortMode.h>
+#include <aidl/android/hardware/usb/PortPowerRole.h>
+#include <aidl/android/hardware/usb/PortRole.h>
+#include <aidl/android/hardware/usb/PortStatus.h>
+#include <aidl/android/hardware/usb/Status.h>
+#include <aidl/Vintf.h>
+#include <aidl/Gtest.h>
+
+#include <android/binder_auto_utils.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+#include <gtest/gtest.h>
+
+#include <log/log.h>
+#include <stdlib.h>
+#include <chrono>
+#include <condition_variable>
+#include <mutex>
+
+#define TIMEOUT_PERIOD 10
+
+using ::aidl::android::hardware::usb::BnUsbCallback;
+using ::aidl::android::hardware::usb::IUsb;
+using ::aidl::android::hardware::usb::IUsbCallback;
+using ::aidl::android::hardware::usb::PortDataRole;
+using ::aidl::android::hardware::usb::PortMode;
+using ::aidl::android::hardware::usb::PortPowerRole;
+using ::aidl::android::hardware::usb::PortRole;
+using ::aidl::android::hardware::usb::PortStatus;
+using ::aidl::android::hardware::usb::Status;
+
+using ::ndk::ScopedAStatus;
+using ::ndk::SpAIBinder;
+using std::vector;
+using std::shared_ptr;
+using std::string;
+
+// The main test class for the USB aidl hal
+class UsbAidlTest : public testing::TestWithParam<std::string> {
+ public:
+  // Callback class for the USB aidl hal.
+  // Usb Hal will call this object upon role switch or port query.
+  class UsbCallback : public BnUsbCallback {
+    UsbAidlTest& parent_;
+    int cookie;
+
+   public:
+    UsbCallback(UsbAidlTest& parent, int cookie)
+        : parent_(parent), cookie(cookie){};
+
+    virtual ~UsbCallback() = default;
+
+    // Callback method for the port status.
+    ScopedAStatus notifyPortStatusChange(const vector<PortStatus>& currentPortStatus,
+                                         Status retval) override {
+      if (retval == Status::SUCCESS && currentPortStatus.size() > 0) {
+        parent_.usb_last_port_status.portName =
+            currentPortStatus[0].portName.c_str();
+        parent_.usb_last_port_status.currentDataRole =
+            currentPortStatus[0].currentDataRole;
+        parent_.usb_last_port_status.currentPowerRole =
+            currentPortStatus[0].currentPowerRole;
+        parent_.usb_last_port_status.currentMode =
+            currentPortStatus[0].currentMode;
+      }
+      parent_.usb_last_cookie = cookie;
+      return ScopedAStatus::ok();
+    }
+
+    // Callback method for the status of role switch operation.
+    ScopedAStatus notifyRoleSwitchStatus(const string& /*portName*/, const PortRole& newRole,
+                                         Status retval, int64_t transactionId) override {
+      parent_.usb_last_status = retval;
+      parent_.usb_last_cookie = cookie;
+      parent_.usb_last_port_role = newRole;
+      parent_.usb_role_switch_done = true;
+      parent_.last_transactionId = transactionId;
+      parent_.notify();
+      return ScopedAStatus::ok();
+    }
+
+    // Callback method for the status of enableUsbData operation
+    ScopedAStatus notifyEnableUsbDataStatus(const string& /*portName*/, bool /*enable*/,
+                                            Status /*retval*/, int64_t transactionId) override {
+      parent_.last_transactionId = transactionId;
+      parent_.usb_last_cookie = cookie;
+      parent_.enable_usb_data_done = true;
+      parent_.notify();
+      return ScopedAStatus::ok();
+    }
+
+    // Callback method for the status of enableContaminantPresenceDetection
+    ScopedAStatus notifyContaminantEnabledStatus(const string& /*portName*/, bool /*enable*/,
+                                                 Status /*retval*/, int64_t transactionId) override {
+      parent_.last_transactionId = transactionId;
+      parent_.usb_last_cookie = cookie;
+      parent_.enable_contaminant_done = true;
+      parent_.notify();
+      return ScopedAStatus::ok();
+    }
+
+    // Callback method for the status of queryPortStatus operation
+    ScopedAStatus notifyQueryPortStatus(const string& /*portName*/, Status /*retval*/,
+                                        int64_t transactionId) override {
+      parent_.last_transactionId = transactionId;
+      parent_.notify();
+      return ScopedAStatus::ok();
+    }
+  };
+
+  virtual void SetUp() override {
+    ALOGI("Setup");
+    usb = IUsb::fromBinder(
+                SpAIBinder(AServiceManager_waitForService(GetParam().c_str())));
+    ASSERT_NE(usb, nullptr);
+
+    usb_cb_2 = ::ndk::SharedRefBase::make<UsbCallback>(*this, 2);
+    ASSERT_NE(usb_cb_2, nullptr);
+    const auto& ret = usb->setCallback(usb_cb_2);
+    ASSERT_TRUE(ret.isOk());
+  }
+
+  virtual void TearDown() override { ALOGI("Teardown"); }
+
+  // Used as a mechanism to inform the test about data/event callback.
+  inline void notify() {
+    std::unique_lock<std::mutex> lock(usb_mtx);
+    usb_count++;
+    usb_cv.notify_one();
+  }
+
+  // Test code calls this function to wait for data/event callback.
+  inline std::cv_status wait() {
+    std::unique_lock<std::mutex> lock(usb_mtx);
+
+    std::cv_status status = std::cv_status::no_timeout;
+    auto now = std::chrono::system_clock::now();
+    while (usb_count == 0) {
+      status =
+          usb_cv.wait_until(lock, now + std::chrono::seconds(TIMEOUT_PERIOD));
+      if (status == std::cv_status::timeout) {
+        ALOGI("timeout");
+        return status;
+      }
+    }
+    usb_count--;
+    return status;
+  }
+
+  // USB aidl hal Proxy
+  shared_ptr<IUsb> usb;
+
+  // Callback objects for usb aidl
+  // Methods of these objects are called to notify port status updates.
+  shared_ptr<IUsbCallback> usb_cb_1, usb_cb_2;
+
+  // The last conveyed status of the USB ports.
+  // Stores information of currentt_data_role, power_role for all the USB ports
+  PortStatus usb_last_port_status;
+
+  // Status of the last role switch operation.
+  Status usb_last_status;
+
+  // Port role information of the last role switch operation.
+  PortRole usb_last_port_role;
+
+  // Flag to indicate the invocation of role switch callback.
+  bool usb_role_switch_done;
+
+  // Flag to indicate the invocation of notifyContaminantEnabledStatus callback.
+  bool enable_contaminant_done;
+
+  // Flag to indicate the invocation of notifyEnableUsbDataStatus callback.
+  bool enable_usb_data_done;
+
+  // Stores the cookie of the last invoked usb callback object.
+  int usb_last_cookie;
+
+  // Last transaction ID that was recorded.
+  int64_t last_transactionId;
+  // synchronization primitives to coordinate between main test thread
+  // and the callback thread.
+  std::mutex usb_mtx;
+  std::condition_variable usb_cv;
+  int usb_count = 0;
+};
+
+/*
+ * Test to see if setCallback succeeds.
+ * Callback object is created and registered.
+ */
+TEST_P(UsbAidlTest, setCallback) {
+  ALOGI("UsbAidlTest setCallback start");
+  usb_cb_1 = ::ndk::SharedRefBase::make<UsbCallback>(*this, 1);
+  ASSERT_NE(usb_cb_1, nullptr);
+  const auto& ret = usb->setCallback(usb_cb_1);
+  ASSERT_TRUE(ret.isOk());
+  ALOGI("UsbAidlTest setCallback end");
+}
+
+/*
+ * Check to see if querying type-c
+ * port status succeeds.
+ * The callback parameters are checked to see if the transaction id
+ * matches.
+ */
+TEST_P(UsbAidlTest, queryPortStatus) {
+  ALOGI("UsbAidlTest queryPortStatus start");
+  int64_t transactionId = rand() % 10000;
+  const auto& ret = usb->queryPortStatus(transactionId);
+  ASSERT_TRUE(ret.isOk());
+  EXPECT_EQ(std::cv_status::no_timeout, wait());
+  EXPECT_EQ(2, usb_last_cookie);
+  EXPECT_EQ(transactionId, last_transactionId);
+  ALOGI("UsbAidlTest queryPortStatus end: %s", usb_last_port_status.portName.c_str());
+}
+
+/*
+ * Trying to switch a non-existent port should fail.
+ * This test case tried to switch the port with empty
+ * name which is expected to fail.
+ * The callback parameters are checked to see if the transaction id
+ * matches.
+ */
+TEST_P(UsbAidlTest, switchEmptyPort) {
+  ALOGI("UsbAidlTest switchEmptyPort start");
+  PortRole role;
+  role.set<PortRole::powerRole>(PortPowerRole::SOURCE);
+  int64_t transactionId = rand() % 10000;
+  const auto& ret = usb->switchRole("", role, transactionId);
+  ASSERT_TRUE(ret.isOk());
+  EXPECT_EQ(std::cv_status::no_timeout, wait());
+  EXPECT_EQ(Status::ERROR, usb_last_status);
+  EXPECT_EQ(transactionId, last_transactionId);
+  EXPECT_EQ(2, usb_last_cookie);
+  ALOGI("UsbAidlTest switchEmptyPort end");
+}
+
+/*
+ * Test switching the power role of usb port.
+ * Test case queries the usb ports present in device.
+ * If there is at least one usb port, a power role switch
+ * to SOURCE is attempted for the port.
+ * The callback parameters are checked to see if the transaction id
+ * matches.
+ */
+TEST_P(UsbAidlTest, switchPowerRole) {
+  ALOGI("UsbAidlTest switchPowerRole start");
+  PortRole role;
+  role.set<PortRole::powerRole>(PortPowerRole::SOURCE);
+  int64_t transactionId = rand() % 10000;
+  const auto& ret = usb->queryPortStatus(transactionId);
+  ASSERT_TRUE(ret.isOk());
+  EXPECT_EQ(std::cv_status::no_timeout, wait());
+  EXPECT_EQ(2, usb_last_cookie);
+  EXPECT_EQ(transactionId, last_transactionId);
+
+  if (!usb_last_port_status.portName.empty()) {
+    string portBeingSwitched = usb_last_port_status.portName;
+    ALOGI("switchPower role portname:%s", portBeingSwitched.c_str());
+    usb_role_switch_done = false;
+    transactionId = rand() % 10000;
+    const auto& ret = usb->switchRole(portBeingSwitched, role, transactionId);
+    ASSERT_TRUE(ret.isOk());
+
+    std::cv_status waitStatus = wait();
+    while (waitStatus == std::cv_status::no_timeout &&
+           usb_role_switch_done == false)
+      waitStatus = wait();
+
+    EXPECT_EQ(std::cv_status::no_timeout, waitStatus);
+    EXPECT_EQ(2, usb_last_cookie);
+    EXPECT_EQ(transactionId, last_transactionId);
+  }
+  ALOGI("UsbAidlTest switchPowerRole end");
+}
+
+/*
+ * Test switching the data role of usb port.
+ * Test case queries the usb ports present in device.
+ * If there is at least one usb port, a data role switch
+ * to device is attempted for the port.
+ * The callback parameters are checked to see if transaction id
+ * matches.
+ */
+TEST_P(UsbAidlTest, switchDataRole) {
+  ALOGI("UsbAidlTest switchDataRole start");
+  PortRole role;
+  role.set<PortRole::dataRole>(PortDataRole::DEVICE);
+  int64_t transactionId = rand() % 10000;
+  const auto& ret = usb->queryPortStatus(transactionId);
+  ASSERT_TRUE(ret.isOk());
+  EXPECT_EQ(std::cv_status::no_timeout, wait());
+  EXPECT_EQ(2, usb_last_cookie);
+  EXPECT_EQ(transactionId, last_transactionId);
+
+  if (!usb_last_port_status.portName.empty()) {
+    string portBeingSwitched = usb_last_port_status.portName;
+    ALOGI("portname:%s", portBeingSwitched.c_str());
+    usb_role_switch_done = false;
+    transactionId = rand() % 10000;
+    const auto& ret = usb->switchRole(portBeingSwitched, role, transactionId);
+    ASSERT_TRUE(ret.isOk());
+
+    std::cv_status waitStatus = wait();
+    while (waitStatus == std::cv_status::no_timeout &&
+           usb_role_switch_done == false)
+      waitStatus = wait();
+
+    EXPECT_EQ(std::cv_status::no_timeout, waitStatus);
+    EXPECT_EQ(2, usb_last_cookie);
+    EXPECT_EQ(transactionId, last_transactionId);
+  }
+  ALOGI("UsbAidlTest switchDataRole end");
+}
+
+/*
+ * Test enabling contaminant presence detection of the port.
+ * Test case queries the usb ports present in device.
+ * If there is at least one usb port, enabling contaminant detection
+ * is attempted for the port.
+ * The callback parameters are checked to see if transaction id
+ * matches.
+ */
+TEST_P(UsbAidlTest, enableContaminantPresenceDetection) {
+  ALOGI("UsbAidlTest enableContaminantPresenceDetection start");
+  int64_t transactionId = rand() % 10000;
+  const auto& ret = usb->queryPortStatus(transactionId);
+  ASSERT_TRUE(ret.isOk());
+  EXPECT_EQ(std::cv_status::no_timeout, wait());
+  EXPECT_EQ(2, usb_last_cookie);
+  EXPECT_EQ(transactionId, last_transactionId);
+
+  if (!usb_last_port_status.portName.empty()) {
+    ALOGI("portname:%s", usb_last_port_status.portName.c_str());
+    enable_contaminant_done = false;
+    transactionId = rand() % 10000;
+    const auto& ret = usb->enableContaminantPresenceDetection(usb_last_port_status.portName,
+                                                              true, transactionId);
+    ASSERT_TRUE(ret.isOk());
+
+    std::cv_status waitStatus = wait();
+    while (waitStatus == std::cv_status::no_timeout &&
+           enable_contaminant_done == false)
+      waitStatus = wait();
+
+    EXPECT_EQ(std::cv_status::no_timeout, waitStatus);
+    EXPECT_EQ(2, usb_last_cookie);
+    EXPECT_EQ(transactionId, last_transactionId);
+  }
+  ALOGI("UsbAidlTest enableContaminantPresenceDetection end");
+}
+
+/*
+ * Test enabling Usb data of the port.
+ * Test case queries the usb ports present in device.
+ * If there is at least one usb port, enabling Usb data is attempted
+ * for the port.
+ * The callback parameters are checked to see if transaction id
+ * matches.
+ */
+TEST_P(UsbAidlTest, enableUsbData) {
+  ALOGI("UsbAidlTest enableUsbData start");
+  int64_t transactionId = rand() % 10000;
+  const auto& ret = usb->queryPortStatus(transactionId);
+  ASSERT_TRUE(ret.isOk());
+  EXPECT_EQ(std::cv_status::no_timeout, wait());
+  EXPECT_EQ(2, usb_last_cookie);
+  EXPECT_EQ(transactionId, last_transactionId);
+
+  if (!usb_last_port_status.portName.empty()) {
+    ALOGI("portname:%s", usb_last_port_status.portName.c_str());
+    enable_usb_data_done = false;
+    transactionId = rand() % 10000;
+    const auto& ret = usb->enableUsbData(usb_last_port_status.portName, true, transactionId);
+    ASSERT_TRUE(ret.isOk());
+
+    std::cv_status waitStatus = wait();
+    while (waitStatus == std::cv_status::no_timeout &&
+           enable_usb_data_done == false)
+      waitStatus = wait();
+
+    EXPECT_EQ(std::cv_status::no_timeout, waitStatus);
+    EXPECT_EQ(2, usb_last_cookie);
+    EXPECT_EQ(transactionId, last_transactionId);
+  }
+  ALOGI("UsbAidlTest enableUsbData end");
+}
+
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(UsbAidlTest);
+INSTANTIATE_TEST_SUITE_P(
+        PerInstance, UsbAidlTest,
+        testing::ValuesIn(::android::getAidlHalInstanceNames(IUsb::descriptor)),
+        ::android::PrintInstanceNameToString);
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    ABinderProcess_setThreadPoolMaxThreadCount(1);
+    ABinderProcess_startThreadPool();
+    return RUN_ALL_TESTS();
+}