diff --git a/automotive/vehicle/2.0/default/Android.bp b/automotive/vehicle/2.0/default/Android.bp
index e529675..21b410a 100644
--- a/automotive/vehicle/2.0/default/Android.bp
+++ b/automotive/vehicle/2.0/default/Android.bp
@@ -125,6 +125,9 @@
 cc_binary {
     name: "android.hardware.automotive.vehicle@2.0-service",
     defaults: ["vhal_v2_0_defaults"],
+    vintf_fragments: [
+        "android.hardware.automotive.vehicle@2.0-service.xml",
+    ],
     init_rc: ["android.hardware.automotive.vehicle@2.0-service.rc"],
     vendor: true,
     relative_install_path: "hw",
diff --git a/automotive/vehicle/2.0/manifest.vehicle.xml b/automotive/vehicle/2.0/default/android.hardware.automotive.vehicle@2.0-service.xml
similarity index 83%
rename from automotive/vehicle/2.0/manifest.vehicle.xml
rename to automotive/vehicle/2.0/default/android.hardware.automotive.vehicle@2.0-service.xml
index 832b302..660b03d 100644
--- a/automotive/vehicle/2.0/manifest.vehicle.xml
+++ b/automotive/vehicle/2.0/default/android.hardware.automotive.vehicle@2.0-service.xml
@@ -1,4 +1,4 @@
-<manifest version="1.0" type="device" target-level="3">
+<manifest version="1.0" type="device">
     <hal format="hidl">
         <name>android.hardware.automotive.vehicle</name>
         <transport>hwbinder</transport>
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
index a4ea7cf..83546e2 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
@@ -439,6 +439,16 @@
 
         {.config =
                  {
+                         .prop = toInt(VehicleProperty::TIRE_PRESSURE_DISPLAY_UNITS),
+                         .access = VehiclePropertyAccess::READ_WRITE,
+                         .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+                         .configArray = {(int)VehicleUnit::KILOPASCAL, (int)VehicleUnit::PSI,
+                                         (int)VehicleUnit::BAR},
+                 },
+         .initialValue = {.int32Values = {toInt(VehicleUnit::PSI)}}},
+
+        {.config =
+                 {
                          .prop = toInt(VehicleProperty::CURRENT_GEAR),
                          .access = VehiclePropertyAccess::READ,
                          .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
diff --git a/automotive/vehicle/2.0/types.hal b/automotive/vehicle/2.0/types.hal
index 23f9135..82f938c 100644
--- a/automotive/vehicle/2.0/types.hal
+++ b/automotive/vehicle/2.0/types.hal
@@ -2646,9 +2646,9 @@
      * If the request succeeded and Android has 3 users (0, 10, 11), the response would be:
      *
      * int32[0]: -108 // request id
-     * int32[1]:  5   // messageType = SwitchUserMessageType::ANDROID_SWITCH
+     * int32[1]:  5   // messageType = SwitchUserMessageType::ANDROID_POST_SWITCH
      * int32[2]:  11  // target user id
-     * int32[3]:  11  // target user id flags (none)
+     * int32[3]:  0   // target user id flags (none)
      * int32[4]:  11  // current user
      * int32[5]:  0   // current user flags (none)
      * int32[6]:  3   // number of users
@@ -2664,17 +2664,21 @@
      *
      * 5.ANDROID_POST_SWITCH
      * ---------------------
-     * Called by the Android System after a request to switch a user was made
+     * Called by the Android System after a request to switch a user was made.
      *
      * This property is called after switch requests of any type (i.e., LEGACY_ANDROID_SWITCH,
      * ANDROID_SWITCH, or VEHICLE_REQUEST) and can be used to determine if the request succeeded or
      * failed:
      *
-     * 1. When it succeeded, it's called when the Android user is in the boot locked state and the
-     *    value of the current and target users ids in the response are different. This would be
-     *    equivalent to receiving an Intent.ACTION_LOCKED_BOOT_COMPLETED in an Android app.
+     * 1. When it succeeded, it's called when the Android user is in the unlocked state and the
+     *    value of the current and target users ids in the response are the same. This would be
+     *    equivalent to receiving an Intent.ACTION_USER_UNLOCKED in an Android app.
      * 2. When it failed it's called right away and the value of the current and target users ids
-     *    in the response are the same.
+     *    in the response are different (as the current user didn't change to the target).
+     * 3. If a new switch request is made before the HAL responded to the previous one or before
+     *    the user was unlocked, then the ANDROID_POST_SWITCH request is not made. For example,
+     *    the driver could accidentally switch to the wrong user which has lock crentials, then
+     *    switch to the right one before entering the credentials.
      *
      * The HAL can update its internal state once it receives this request, but it doesn't need to
      * reply back to the Android System.
@@ -2824,7 +2828,7 @@
      * int32[0]: 0   (Android user flags)
      * int32[1]: 1   (number of associations being set)
      * int32[2]: 101 (1st type: UserIdentificationAssociationType::CUSTOM_1)
-     * int32[3]: 1   (1st value: UserIdentificationAssociationSETValue::ASSOCIATE_CURRENT_USER)
+     * int32[3]: 1   (1st value: UserIdentificationAssociationSetValue::ASSOCIATE_CURRENT_USER)
      *
      * If the request succeeded, the response would be simply:
      *
diff --git a/current.txt b/current.txt
index e553999..eb2273e 100644
--- a/current.txt
+++ b/current.txt
@@ -656,9 +656,6 @@
 7d2e77ad86766bbc213fa7377eab739f44cc0866e567e6d33c0e27e7f99e27a8 android.hardware.automotive.sv@1.0::ISurroundViewSession
 d34769e55df919739bb46f25ae2e125e9c807733afa94daeca20feadd74de79c android.hardware.automotive.sv@1.0::ISurroundViewStream
 affd9c591f48a69773fcf43dc4a716d292cd4bc5ba2be8649276af0aedea435d android.hardware.automotive.sv@1.0::types
-b3caf524c46a47d67e6453a34419e1881942d059e146cda740502670e9a752c3 android.hardware.automotive.vehicle@2.0::IVehicle
-7ce8728b27600e840cacf0a832f6942819fe535f9d3797ae052d5eef5065921c android.hardware.automotive.vehicle@2.0::IVehicleCallback
-6b2564fce1d364baf9ba15a5cb00a8f08f86a5be5387c0ede795328ca536a2c7 android.hardware.automotive.vehicle@2.0::types
 140f8f62100ccf9cd282ae3685a0f4ef0a9f971d77dfbc7350ccb4e04cf295ec android.hardware.biometrics.fingerprint@2.2::IBiometricsFingerprint
 82cad99f5feb2ea9bcd4579055edf4af8feb9fc602a6e4827ddd727d254d4991 android.hardware.biometrics.fingerprint@2.2::IBiometricsFingerprintClientCallback
 ae6315fd42196478ac08441cb489d854118001bca5b9b9fd58af5110952be30e android.hardware.biometrics.fingerprint@2.2::types
diff --git a/secure_element/1.0/vts/OWNERS b/secure_element/1.0/vts/OWNERS
new file mode 100644
index 0000000..c7963e7
--- /dev/null
+++ b/secure_element/1.0/vts/OWNERS
@@ -0,0 +1,4 @@
+alisher@google.com
+jackcwyu@google.com
+georgekgchang@google.com
+zachoverflow@google.com
diff --git a/secure_element/1.1/vts/OWNERS b/secure_element/1.1/vts/OWNERS
new file mode 100644
index 0000000..c7963e7
--- /dev/null
+++ b/secure_element/1.1/vts/OWNERS
@@ -0,0 +1,4 @@
+alisher@google.com
+jackcwyu@google.com
+georgekgchang@google.com
+zachoverflow@google.com
diff --git a/secure_element/1.2/vts/OWNERS b/secure_element/1.2/vts/OWNERS
new file mode 100644
index 0000000..c7963e7
--- /dev/null
+++ b/secure_element/1.2/vts/OWNERS
@@ -0,0 +1,4 @@
+alisher@google.com
+jackcwyu@google.com
+georgekgchang@google.com
+zachoverflow@google.com
diff --git a/secure_element/1.2/vts/functional/VtsHalSecureElementV1_2TargetTest.cpp b/secure_element/1.2/vts/functional/VtsHalSecureElementV1_2TargetTest.cpp
index 98e4502..9392f14 100644
--- a/secure_element/1.2/vts/functional/VtsHalSecureElementV1_2TargetTest.cpp
+++ b/secure_element/1.2/vts/functional/VtsHalSecureElementV1_2TargetTest.cpp
@@ -85,6 +85,7 @@
  * Reset:
  * Calls reset()
  * Checks status
+ * Check onStateChange is received with connected state set to false
  * Check onStateChange is received with connected state set to true
  */
 TEST_P(SecureElementHidlTest, Reset) {
@@ -92,6 +93,10 @@
 
     auto res = se_cb_->WaitForCallback(kCallbackNameOnStateChange);
     EXPECT_TRUE(res.no_timeout);
+    EXPECT_FALSE(res.args->state_);
+
+    res = se_cb_->WaitForCallback(kCallbackNameOnStateChange);
+    EXPECT_TRUE(res.no_timeout);
     EXPECT_TRUE(res.args->state_);
 }