diff --git a/nfc/1.0/Android.mk b/nfc/1.0/Android.mk
new file mode 100644
index 0000000..b38f927
--- /dev/null
+++ b/nfc/1.0/Android.mk
@@ -0,0 +1,30 @@
+LOCAL_PATH := $(call my-dir)
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := android.hardware.nfc@1.0
+LOCAL_MODULE_CLASS := SHARED_LIBRARIES
+
+intermediates := $(local-generated-sources-dir)
+
+GEN := \
+  $(intermediates)/android/hardware/nfc/1.0/types.cpp \
+  $(intermediates)/android/hardware/nfc/1.0/NfcAll.cpp \
+  $(intermediates)/android/hardware/nfc/1.0/NfcClientCallbackAll.cpp \
+
+$(GEN): PRIVATE_OUTPUT_DIR := $(intermediates)
+
+$(GEN): PRIVATE_CUSTOM_TOOL = \
+  hidl-gen -o $(PRIVATE_OUTPUT_DIR) android.hardware.nfc@1.0
+
+$(GEN): $(LOCAL_PATH)/types.hal $(LOCAL_PATH)/INfc.hal $(LOCAL_PATH)/INfcClientCallback.hal
+	$(transform-generated-source)
+
+LOCAL_GENERATED_SOURCES += $(GEN)
+
+LOCAL_EXPORT_C_INCLUDE_DIRS := $(intermediates)
+
+LOCAL_SHARED_LIBRARIES := \
+  libhwbinder \
+  libutils \
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/nfc/1.0/INfc.hal b/nfc/1.0/INfc.hal
new file mode 100644
index 0000000..a1dc247
--- /dev/null
+++ b/nfc/1.0/INfc.hal
@@ -0,0 +1,73 @@
+package android.hardware.nfc@1.0;
+
+import INfcClientCallback;
+
+interface INfc {
+    /*
+     * Opens the NFC controller device and performs initialization.
+     * This may include patch download and other vendor-specific initialization.
+     *
+     * If open completes successfully, the controller should be ready to perform
+     * NCI initialization - ie accept CORE_RESET and subsequent commands through
+     * the write() call.
+     *
+     * If open() returns 0, the NCI stack will wait for a HAL_NFC_OPEN_CPLT_EVT
+     * before continuing.
+     *
+     * If open() returns any other value, the NCI stack will stop.
+     *
+     */
+    open(INfcClientCallback clientCallback) generates (int32_t retval);
+
+    /*
+     * Performs an NCI write.
+     *
+     * This method may queue writes and return immediately. The only
+     * requirement is that the writes are executed in order.
+     */
+    write(nfc_data_t data) generates (int32_t retval);
+
+    /*
+     * core_initialized() is called after the CORE_INIT_RSP is received from the NFCC.
+     * At this time, the HAL can do any chip-specific configuration.
+     *
+     * If core_initialized() returns 0, the NCI stack will wait for a HAL_NFC_POST_INIT_CPLT_EVT
+     * before continuing.
+     *
+     * If core_initialized() returns any other value, the NCI stack will continue
+     * immediately.
+     */
+    core_initialized(vec<uint8_t> data) generates (int32_t retval);
+
+    /*
+     * pre_discover is called every time before starting RF discovery.
+     * It is a good place to do vendor-specific configuration that must be
+     * performed every time RF discovery is about to be started.
+     *
+     * If pre_discover() returns 0, the NCI stack will wait for a HAL_NFC_PRE_DISCOVER_CPLT_EVT
+     * before continuing.
+     *
+     * If pre_discover() returns any other value, the NCI stack will start
+     * RF discovery immediately.
+     */
+    pre_discover() generates (int32_t retval);
+
+    /*
+     * Close the NFC controller. Should free all resources.
+     */
+    close() generates (int32_t retval);
+
+    /*
+     * Grant HAL the exclusive control to send NCI commands.
+     * Called in response to HAL_REQUEST_CONTROL_EVT.
+     * Must only be called when there are no NCI commands pending.
+     * HAL_RELEASE_CONTROL_EVT will notify when HAL no longer needs exclusive control.
+     */
+    control_granted() generates (int32_t retval);
+
+     /*
+     * Restart controller by power cyle;
+     * HAL_OPEN_CPLT_EVT will notify when operation is complete.
+     */
+    power_cycle() generates (int32_t retval);
+};
diff --git a/nfc/1.0/INfcClientCallback.hal b/nfc/1.0/INfcClientCallback.hal
new file mode 100644
index 0000000..979728b
--- /dev/null
+++ b/nfc/1.0/INfcClientCallback.hal
@@ -0,0 +1,15 @@
+package android.hardware.nfc@1.0;
+
+interface INfcClientCallback {
+    /*
+     * The callback passed in from the NFC stack that the HAL
+     * can use to pass events back to the stack.
+     */
+    sendEvent(nfc_event_t event, nfc_status_t event_status);
+
+    /*
+     * The callback passed in from the NFC stack that the HAL
+     * can use to pass incomming data to the stack.
+     */
+    sendData(nfc_data_t data);
+};
diff --git a/nfc/1.0/types.hal b/nfc/1.0/types.hal
new file mode 100644
index 0000000..9166e96
--- /dev/null
+++ b/nfc/1.0/types.hal
@@ -0,0 +1,23 @@
+package android.hardware.nfc@1.0;
+
+enum nfc_event_t : uint32_t {
+    HAL_NFC_OPEN_CPLT_EVT           = 0,
+    HAL_NFC_CLOSE_CPLT_EVT          = 1,
+    HAL_NFC_POST_INIT_CPLT_EVT      = 2,
+    HAL_NFC_PRE_DISCOVER_CPLT_EVT   = 3,
+    HAL_NFC_REQUEST_CONTROL_EVT     = 4,
+    HAL_NFC_RELEASE_CONTROL_EVT     = 5,
+    HAL_NFC_ERROR_EVT               = 6
+};
+
+enum nfc_status_t : uint32_t {
+    HAL_NFC_STATUS_OK               = 0,
+    HAL_NFC_STATUS_FAILED           = 1,
+    HAL_NFC_STATUS_ERR_TRANSPORT    = 2,
+    HAL_NFC_STATUS_ERR_CMD_TIMEOUT  = 3,
+    HAL_NFC_STATUS_REFUSED          = 4
+};
+
+struct nfc_data_t {
+    vec<uint8_t> data;
+};