graphics: add IMapper to complement IAllocator
IMapper is loaded in-process and is defined in C++ instead of HIDL. To
guarantee binary compability, the interface is a struct of function
pointers instead of a class of pure virtual member functions. The
functions pointed to by the function pointers must also have C-linkage and
have all of their parameters PODs.
Implementations are expected to be installed to
/oem/lib/hw/android.hardware.graphics.mapper.hallib.so
/vendor/lib/hw/android.hardware.graphics.mapper.hallib.so
/system/lib/hw/android.hardware.graphics.mapper.hallib.so
(lib64 instead of lib for 64-bit implementations)
The loader will look for the symbol "HALLIB_FETCH_Interface" and use it to
fetch the interface.
Test: make android.hardware.graphics.mapper@2.0
Change-Id: I3a2c7a6ce18a90adda6df2d89559c957a122fdf0
diff --git a/graphics/mapper/2.0/IMapper.h b/graphics/mapper/2.0/IMapper.h
new file mode 100644
index 0000000..23faa80
--- /dev/null
+++ b/graphics/mapper/2.0/IMapper.h
@@ -0,0 +1,388 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_IMAPPER_H
+#define ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_IMAPPER_H
+
+#include <type_traits>
+
+#include <android/hardware/graphics/mapper/2.0/types.h>
+
+extern "C" {
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace mapper {
+namespace V2_0 {
+
+struct Device {
+ struct Rect {
+ int32_t left;
+ int32_t top;
+ int32_t width;
+ int32_t height;
+ };
+ static_assert(std::is_pod<Rect>::value, "Device::Rect is not POD");
+
+ /*
+ * Create a mapper device.
+ *
+ * @return error is NONE upon success. Otherwise,
+ * NOT_SUPPORTED when creation will never succeed.
+ * BAD_RESOURCES when creation failed at this time.
+ * @return device is the newly created mapper device.
+ */
+ typedef Error (*createDevice)(Device** outDevice);
+
+ /*
+ * Destroy a mapper device.
+ *
+ * @return error is always NONE.
+ * @param device is the mapper device to destroy.
+ */
+ typedef Error (*destroyDevice)(Device* device);
+
+ /*
+ * Adds a reference to the given buffer handle.
+ *
+ * A buffer handle received from a remote process or exported by
+ * IAllocator::exportHandle is unknown to this client-side library. There
+ * is also no guarantee that the buffer's backing store will stay alive.
+ * This function must be called at least once in both cases to intrdouce
+ * the buffer handle to this client-side library and to secure the backing
+ * store. It may also be called more than once to increase the reference
+ * count if two components in the same process want to interact with the
+ * buffer independently.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer to which a reference must be added.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid
+ * NO_RESOURCES when it is not possible to add a
+ * reference to this buffer at this time
+ */
+ typedef Error (*retain)(Device* device,
+ const native_handle_t* bufferHandle);
+
+ /*
+ * Removes a reference from the given buffer buffer.
+ *
+ * If no references remain, the buffer handle should be freed with
+ * native_handle_close/native_handle_delete. When the last buffer handle
+ * referring to a particular backing store is freed, that backing store
+ * should also be freed.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer from which a reference must be
+ * removed.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ */
+ typedef Error (*release)(Device* device,
+ const native_handle_t* bufferHandle);
+
+ /*
+ * Gets the width and height of the buffer in pixels.
+ *
+ * See IAllocator::BufferDescriptorInfo for more information.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer from which to get the dimensions.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * @return width is the width of the buffer in pixels.
+ * @return height is the height of the buffer in pixels.
+ */
+ typedef Error (*getDimensions)(Device* device,
+ const native_handle_t* bufferHandle,
+ uint32_t* outWidth,
+ uint32_t* outHeight);
+
+ /*
+ * Gets the format of the buffer.
+ *
+ * See IAllocator::BufferDescriptorInfo for more information.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer from which to get format.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * @return format is the format of the buffer.
+ */
+ typedef Error (*getFormat)(Device* device,
+ const native_handle_t* bufferHandle,
+ PixelFormat* outFormat);
+
+ /*
+ * Gets the producer usage flags which were used to allocate this buffer.
+ *
+ * See IAllocator::BufferDescriptorInfo for more information.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer from which to get the producer usage
+ * flags.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * @return usageMask contains the producer usage flags of the buffer.
+ */
+ typedef Error (*getProducerUsageMask)(Device* device,
+ const native_handle_t* bufferHandle,
+ uint64_t* outUsageMask);
+
+ /*
+ * Gets the consumer usage flags which were used to allocate this buffer.
+ *
+ * See IAllocator::BufferDescriptorInfo for more information.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer from which to get the consumer usage
+ * flags.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * @return usageMask contains the consumer usage flags of the buffer.
+ */
+ typedef Error (*getConsumerUsageMask)(Device* device,
+ const native_handle_t* bufferHandle,
+ uint64_t* outUsageMask);
+
+ /*
+ * Gets a value that uniquely identifies the backing store of the given
+ * buffer.
+ *
+ * Buffers which share a backing store should return the same value from
+ * this function. If the buffer is present in more than one process, the
+ * backing store value for that buffer is not required to be the same in
+ * every process.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer from which to get the backing store
+ * identifier.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * @return store is the backing store identifier for this buffer.
+ */
+ typedef Error (*getBackingStore)(Device* device,
+ const native_handle_t* bufferHandle,
+ BackingStore* outStore);
+
+ /*
+ * Gets the stride of the buffer in pixels.
+ *
+ * The stride is the offset in pixel-sized elements between the same
+ * column in two adjacent rows of pixels. This may not be equal to the
+ * width of the buffer.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer from which to get the stride.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * UNDEFINED when the notion of a stride is not
+ * meaningful for the buffer format.
+ * @return store is the stride in pixels.
+ */
+ typedef Error (*getStride)(Device* device,
+ const native_handle_t* bufferHandle,
+ uint32_t* outStride);
+
+ /*
+ * Returns the number of flex layout planes which are needed to represent
+ * the given buffer. This may be used to efficiently allocate only as many
+ * plane structures as necessary before calling into lockFlex.
+ *
+ * If the given buffer cannot be locked as a flex format, this function
+ * may return UNSUPPORTED (as lockFlex would).
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer for which the number of planes should
+ * be queried.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * UNSUPPORTED when the buffer's format cannot be
+ * represented in a flex layout.
+ * @return numPlanes is the number of flex planes required to describe the
+ * given buffer.
+ */
+ typedef Error (*getNumFlexPlanes)(Device* device,
+ const native_handle_t* bufferHandle,
+ uint32_t* outNumPlanes);
+
+ /*
+ * Locks the given buffer for the specified CPU usage.
+ *
+ * Exactly one of producerUsageMask and consumerUsageMask must be 0. The
+ * usage which is not 0 must be one of the *Usage::CPU* values, as
+ * applicable. Locking a buffer for a non-CPU usage is not supported.
+ *
+ * Locking the same buffer simultaneously from multiple threads is
+ * permitted, but if any of the threads attempt to lock the buffer for
+ * writing, the behavior is undefined, except that it must not cause
+ * process termination or block the client indefinitely. Leaving the
+ * buffer content in an indeterminate state or returning an error are both
+ * acceptable.
+ *
+ * The client must not modify the content of the buffer outside of
+ * accessRegion, and the device need not guarantee that content outside of
+ * accessRegion is valid for reading. The result of reading or writing
+ * outside of accessRegion is undefined, except that it must not cause
+ * process termination.
+ *
+ * data will be filled with a pointer to the locked buffer memory. This
+ * address will represent the top-left corner of the entire buffer, even
+ * if accessRegion does not begin at the top-left corner.
+ *
+ * acquireFence is a file descriptor referring to a acquire sync fence
+ * object, which will be signaled when it is safe for the device to access
+ * the contents of the buffer (prior to locking). If it is already safe to
+ * access the buffer contents, -1 may be passed instead.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer to lock.
+ * @param producerUsageMask contains the producer usage flags to request;
+ * either this or consumerUsagemask must be 0, and the other must
+ * be a CPU usage.
+ * @param consumerUsageMask contains the consumer usage flags to request;
+ * either this or producerUsageMask must be 0, and the other must
+ * be a CPU usage.
+ * @param accessRegion is the portion of the buffer that the client
+ * intends to access.
+ * @param acquireFence is a sync fence file descriptor as described above.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * BAD_VALUE when neither or both of producerUsageMask
+ * and consumerUsageMask were 0, or the usage
+ * which was not 0 was not a CPU usage.
+ * NO_RESOURCES when the buffer cannot be locked at this
+ * time, but locking may succeed at a future
+ * time.
+ * UNSUPPORTED when the buffer cannot be locked with the
+ * given usage, and any future attempts at
+ * locking will also fail.
+ * @return data will be filled with a CPU-accessible pointer to the buffer
+ * data.
+ */
+ typedef Error (*lock)(Device* device,
+ const native_handle_t* bufferHandle,
+ uint64_t producerUsageMask,
+ uint64_t consumerUsageMask,
+ const Rect* accessRegion,
+ int32_t acquireFence,
+ void** outData);
+
+ /*
+ * This is largely the same as lock(), except that instead of returning a
+ * pointer directly to the buffer data, it returns an FlexLayout struct
+ * describing how to access the data planes.
+ *
+ * This function must work on buffers with PixelFormat::YCbCr_*_888 if
+ * supported by the device, as well as with any other formats requested by
+ * multimedia codecs when they are configured with a
+ * flexible-YUV-compatible color format.
+ *
+ * This function may also be called on buffers of other formats, including
+ * non-YUV formats, but if the buffer format is not compatible with a
+ * flexible representation, it may return UNSUPPORTED.
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer to lock.
+ * @param producerUsageMask contains the producer usage flags to request;
+ * either this or consumerUsagemask must be 0, and the other must
+ * be a CPU usage.
+ * @param consumerUsageMask contains the consumer usage flags to request;
+ * either this or producerUsageMask must be 0, and the other must
+ * be a CPU usage.
+ * @param accessRegion is the portion of the buffer that the client
+ * intends to access.
+ * @param acquireFence is a sync fence file descriptor as described in
+ * lock().
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * BAD_VALUE when neither or both of producerUsageMask
+ * and consumerUsageMask were 0, or the usage
+ * which was not 0 was not a CPU usage.
+ * NO_RESOURCES when the buffer cannot be locked at this
+ * time, but locking may succeed at a future
+ * time.
+ * UNSUPPORTED when the buffer cannot be locked with the
+ * given usage, and any future attempts at
+ * locking will also fail.
+ * @return flexLayout will be filled with the description of the planes in
+ * the buffer.
+ */
+ typedef Error (*lockFlex)(Device* device,
+ const native_handle_t* bufferHandle,
+ uint64_t producerUsageMask,
+ uint64_t consumerUsageMask,
+ const Rect* accessRegion,
+ int32_t acquireFence,
+ FlexLayout* outFlexLayout);
+
+ /*
+ * This function indicates to the device that the client will be done with
+ * the buffer when releaseFence signals.
+ *
+ * releaseFence will be filled with a file descriptor referring to a
+ * release sync fence object, which will be signaled when it is safe to
+ * access the contents of the buffer (after the buffer has been unlocked).
+ * If it is already safe to access the buffer contents, then -1 may be
+ * returned instead.
+ *
+ * This function is used to unlock both buffers locked by lock() and those
+ * locked by lockFlex().
+ *
+ * @param device is the mapper device.
+ * @param bufferHandle is the buffer to unlock.
+ * @return error is NONE upon success. Otherwise,
+ * BAD_BUFFER when the buffer handle is invalid.
+ * @return releaseFence is a sync fence file descriptor as described
+ * above.
+ */
+ typedef Error (*unlock)(Device* device,
+ const native_handle_t* bufferHandle,
+ int32_t* outReleaseFence);
+};
+static_assert(std::is_pod<Device>::value, "Device is not POD");
+
+struct IMapper {
+ Device::createDevice createDevice;
+ Device::destroyDevice destroyDevice;
+
+ Device::retain retain;
+ Device::release release;
+ Device::getDimensions getDimensions;
+ Device::getFormat getFormat;
+ Device::getProducerUsageMask getProducerUsageMask;
+ Device::getConsumerUsageMask getConsumerUsageMask;
+ Device::getBackingStore getBackingStore;
+ Device::getStride getStride;
+ Device::getNumFlexPlanes getNumFlexPlanes;
+ Device::lock lock;
+ Device::lockFlex lockFlex;
+ Device::unlock unlock;
+};
+static_assert(std::is_pod<IMapper>::value, "IMapper is not POD");
+
+} // namespace V2_0
+} // namespace mapper
+} // namespace graphics
+} // namespace hardware
+} // namespace android
+
+const void* HALLIB_FETCH_Interface(const char* name);
+
+} // extern "C"
+
+#endif /* ANDROID_HARDWARE_GRAPHICS_MAPPER_V2_0_IMAPPER_H */