Specify that a read_write property can be read only in HAL
Not all read_write properties are included. For example, properties
not exposed through CarPropertyManager are not included. The only
other exception is HVAC_TEMPERATURE_VALUE_SUGGESTION because it behaves
like a function call so it needs to be writable.
Bug: 195962745
Test: presubmit
Change-Id: Ief758fd45b7d21ba2d81899d5bb056c3bc24b15b
diff --git a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 0326ea2..2dc453c 100644
--- a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -340,6 +340,9 @@
/**
* Fuel door open
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -375,6 +378,9 @@
/**
* EV charge port open
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -407,9 +413,9 @@
* all energy sources in a vehicle. For example, a hybrid car's range will
* be the sum of the ranges based on fuel and battery.
*
- * This property may be writable because a navigation app could update the range if it has a
- * more accurate estimate based on the upcoming route. However, this property can be set to
- * VehiclePropertyAccess.READ only at the OEM's discretion.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE because a navigation app could
+ * update the range if it has a more accurate estimate based on the upcoming route. However,
+ * this property can be implemented as VehiclePropertyAccess.READ only at the OEM's discretion.
*
* @change_mode VehiclePropertyChangeMode.CONTINUOUS
* @access VehiclePropertyAccess.READ_WRITE
@@ -465,6 +471,9 @@
* If true, the vehicle may automatically shut off the engine when it is not needed and then
* automatically restart it when needed.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -544,6 +553,9 @@
* regenerated from braking. The minInt32Value in default area's VehicleAreaConfig indicates no
* regenerative braking.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -629,6 +641,9 @@
*
* The EvStoppingMode enum may be extended to include more states in the future.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum EvStoppingMode
@@ -683,6 +698,9 @@
*
* Fan speed setting
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -691,6 +709,9 @@
/**
* Fan direction setting
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleHvacFanDirection
@@ -727,6 +748,9 @@
* that property to get the suggested value before setting HVAC_TEMPERATURE_SET. Otherwise,
* the application may choose the value in HVAC_TEMPERATURE_SET configArray by itself.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @unit VehicleUnit:CELSIUS
@@ -736,6 +760,9 @@
/**
* Fan-based defrost for designated window.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -744,6 +771,9 @@
/**
* On/off AC for designated areaId
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @config_flags Supported areaIds
@@ -758,6 +788,9 @@
* Any parameters modified as a side effect of turning on/off the MAX AC
* parameter shall generate onPropertyEvent() callbacks to the VHAL.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -777,6 +810,9 @@
* areaConfig.areaId = {ROW_1_LEFT | ROW_1_RIGHT} indicates HVAC_MAX_DEFROST_ON
* only can be controlled for the front rows.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -790,6 +826,9 @@
* Recirc “off” means the majority of the airflow into the cabin is coming
* from outside the car.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -825,6 +864,9 @@
* onPropertyEvent() callbacks (i.e. HVAC_DUAL_ON = false,
* HVAC_TEMPERATURE_SET[AreaID] = xxx, etc).
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -833,6 +875,9 @@
/**
* On/off automatic mode
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -849,6 +894,9 @@
* min/max range defines the allowable range and number of steps in each
* direction.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -861,6 +909,9 @@
* The Max value in the config data represents the highest heating level.
* The Min value in the config data MUST be zero and indicates no heating.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -875,6 +926,9 @@
* Negative value indicates cooling.
* 0 indicates temperature control is off.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -896,6 +950,9 @@
* If updating HVAC_TEMPERATURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS
* properties, then their values must be updated and communicated to the AAOS framework as well.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleUnit
@@ -947,6 +1004,9 @@
* - ROW_1_LEFT | ROW_1_RIGHT
* - ROW_2_LEFT | ROW_2_CENTER | ROW_2_RIGHT | ROW_3_LEFT | ROW_3_CENTER | ROW_3_RIGHT
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -978,6 +1038,9 @@
* switch to recirculation mode if the vehicle detects poor incoming air
* quality.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -993,6 +1056,9 @@
* ventilation. This is different than seating cooling. It can be on at the
* same time as cooling, or not.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1001,6 +1067,9 @@
/**
* Electric defrosters' status
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1061,6 +1130,9 @@
* If updating DISTANCE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
* then their values must be updated and communicated to the AAOS framework as well.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleUnit
@@ -1081,6 +1153,9 @@
* If updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
* then their values must be updated and communicated to the AAOS framework as well.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleUnit
@@ -1102,6 +1177,9 @@
* If updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS
* properties, then their values must be updated and communicated to the AAOS framework as well.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleUnit
@@ -1123,6 +1201,9 @@
* If updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
* then their values must be updated and communicated to the AAOS framework as well.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleUnit
@@ -1136,6 +1217,9 @@
* True indicates units are distance over volume such as MPG.
* False indicates units are volume over distance such as L/100KM.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1155,6 +1239,9 @@
* If updating VEHICLE_SPEED_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS
* properties, then their values must be updated and communicated to the AAOS framework as well.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1282,7 +1369,6 @@
*
* int32Values[0] : VehicleApPowerStateReport enum value
* int32Values[1] : Time in ms to wake up, if necessary. Otherwise 0.
-
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -1491,9 +1577,12 @@
* This is an integer in case a door may be set to a particular position.
* Max value indicates fully open, min value (0) indicates fully closed.
*
- * Some vehicles (minivans) can open the door electronically. Hence, the
+ * Some vehicles (minivans) can open the door electronically. Hence, the
* ability to write this property.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1502,6 +1591,9 @@
/**
* Door move
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1512,6 +1604,9 @@
*
* 'true' indicates door is locked
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1524,6 +1619,9 @@
*
* If enabled, the door is unable to be opened from the inside.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1534,6 +1632,9 @@
*
* Positive value indicates tilt upwards, negative value is downwards
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1544,6 +1645,9 @@
*
* Positive value indicates tilt upwards, negative value is downwards
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1554,6 +1658,9 @@
*
* Positive value indicate tilt right, negative value is left
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1564,6 +1671,9 @@
*
* Positive value indicate tilt right, negative value is left
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1574,6 +1684,9 @@
*
* True indicates mirror positions are locked and not changeable
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1584,6 +1697,9 @@
*
* True indicates mirrors are folded
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1597,6 +1713,9 @@
* (for example, when the mirrors fold inward automatically when one exits and locks the
* vehicle) is enabled.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1611,6 +1730,9 @@
* (for example, when the mirrors tilt downward automatically when one reverses the vehicle) is
* enabled.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1654,6 +1776,9 @@
* Write access indicates automatic seat buckling capabilities. There are
* no known cars at this time, but you never know...
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1666,6 +1791,9 @@
* Max value indicates highest position
* Min value indicates lowest position
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1674,6 +1802,9 @@
/**
* Seatbelt height move
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1686,6 +1817,9 @@
* Max value indicates closest to wheel, min value indicates most rearward
* position.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1696,6 +1830,9 @@
*
* Moves the seat position forward and aft.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1708,6 +1845,9 @@
* Max value indicates angling forward towards the steering wheel.
* Min value indicates full recline.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1718,6 +1858,9 @@
*
* Moves the backrest forward or recline.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1730,6 +1873,9 @@
* Max value indicates angling forward towards the steering wheel.
* Min value indicates full recline.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1740,6 +1886,9 @@
*
* Moves the backrest forward or recline.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1752,6 +1901,9 @@
* Max value indicates highest position.
* Min value indicates lowest position.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1762,6 +1914,9 @@
*
* Moves the seat height.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1774,6 +1929,9 @@
* Max value indicates longest depth position.
* Min value indicates shortest position.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1784,6 +1942,9 @@
*
* Adjusts the seat depth.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1796,6 +1957,9 @@
* Max value indicates front edge of seat higher than back edge.
* Min value indicates front edge of seat lower than back edge.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1806,6 +1970,9 @@
*
* Tilts the seat.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1818,6 +1985,9 @@
* Max value indicates most forward position.
* Min value indicates most rearward position.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1828,6 +1998,9 @@
*
* Adjusts the lumbar support.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1840,6 +2013,9 @@
* Max value indicates widest lumbar setting (i.e. least support)
* Min value indicates thinnest lumbar setting.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1850,6 +2026,9 @@
*
* Adjusts the amount of lateral lumbar support.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1866,6 +2045,9 @@
* Max value indicates tallest setting.
* Min value indicates shortest setting.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1884,6 +2066,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1895,6 +2080,9 @@
*
* Moves the headrest up and down.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1907,6 +2095,9 @@
* Max value indicates most upright angle.
* Min value indicates shallowest headrest angle.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1917,6 +2108,9 @@
*
* Adjusts the angle of the headrest
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1929,6 +2123,9 @@
* Max value indicates position closest to front of car.
* Min value indicates position closest to rear of car.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1937,6 +2134,9 @@
/**
* Headrest fore/aft move
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -1978,6 +2178,9 @@
* For each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless
* all enum values of VehicleLightSwitch are supported.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -1991,6 +2194,9 @@
* exit the vehicle. Each area ID must map to the seat that the user is trying to enter/exit
* with the help of the easy access feature.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2007,6 +2213,9 @@
* This property can be set to VehiclePropertyAccess.READ read only for the sake of regulation
* or safety concerns.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2023,6 +2232,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2042,6 +2254,9 @@
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat cushion side support reaches the positional limit, the value resets to 0.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2058,6 +2273,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2079,6 +2297,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2100,6 +2321,9 @@
* The area ID must match the seat that actually moves when the walk-in feature activates, not
* the intended seat the passengers will sit in.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2131,6 +2355,9 @@
*
* Note that in this mode, 0 indicates the window is closed.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2159,6 +2386,9 @@
* Max = open the sunroof, automatically stop when sunroof is fully open.
* Min = open the vent, automatically stop when vent is fully open.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2169,6 +2399,9 @@
*
* True indicates windows are locked and can't be moved.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2226,12 +2459,12 @@
* unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not
* recommended).
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
- * If this property is implemented as read_write and the OTHER state is listed in the
- * VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported value for writing.
- * It is only a supported value for reading.
+ * If this property is implemented as VehiclePropertyAccess.READ_WRITE and the OTHER state is
+ * listed in the VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported
+ * value for writing. It is only a supported value for reading.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -2254,6 +2487,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2273,6 +2509,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2290,6 +2529,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2308,6 +2550,9 @@
*
* This value is not in any particular unit but in a specified range of steps.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2319,6 +2564,9 @@
* If true, the steering wheel will lock automatically to prevent theft in certain
* situations.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2329,6 +2577,9 @@
*
* If true, the steering wheel's position is locked and not changeable.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2340,6 +2591,9 @@
* If true, the driver’s steering wheel will automatically adjust to make it easier for the
* driver to enter and exit the vehicle.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2362,6 +2616,9 @@
* front right dashboard has a glove box embedded in it, then the area ID should be
* SEAT_1_RIGHT).
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2377,6 +2634,9 @@
* front right dashboard has a glove box embedded in it, then the area ID should be
* VehicleAreaSeat#ROW_1_RIGHT).
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -2588,6 +2848,9 @@
*
* The setting that the user wants.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -2599,6 +2862,9 @@
*
* The setting that the user wants.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -2626,6 +2892,9 @@
* Only one of FOG_LIGHTS_SWITCH or REAR_FOG_LIGHTS_SWITCH must be implemented and not both.
* FRONT_FOG_LIGHTS_SWITCH must not be implemented.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -2637,6 +2906,9 @@
*
* The setting that the user wants.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -2662,6 +2934,9 @@
* is open or because of a voice command.
* For example, while the switch is in the "off" or "automatic" position.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -2687,6 +2962,9 @@
* is open or because of a voice command.
* For example, while the switch is in the "off" or "automatic" position.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -2729,6 +3007,9 @@
* For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
* all enum values of VehicleLightSwitch are supported.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -3395,6 +3676,9 @@
* Only one of FOG_LIGHTS_SWITCH or FRONT_FOG_LIGHTS_SWITCH must be implemented. Please refer to
* the documentation on FOG_LIGHTS_SWITCH for more information.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -3423,6 +3707,9 @@
* Only one of FOG_LIGHTS_SWITCH or REAR_FOG_LIGHTS_SWITCH must be implemented. Please refer to
* the documentation on FOG_LIGHTS_SWITCH for more information.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum VehicleLightSwitch
@@ -3436,6 +3723,9 @@
* configArray[0] is used to specify the max current draw allowed by
* the vehicle in Amperes.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @unit VehicleUnit:AMPERE
@@ -3454,6 +3744,9 @@
* then the configArray should be {20, 40, 60, 80, 100}
* If the configArray is empty then all values from 0 to 100 must be valid.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -3478,6 +3771,9 @@
* The setting that the user wants. Setting this property to true starts the battery charging
* and setting to false stops charging.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
*/
@@ -3670,8 +3966,8 @@
* low, that information must be conveyed through the ErrorState values in the
* AUTOMATIC_EMERGENCY_BRAKING_STATE property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -3712,8 +4008,8 @@
* low, that information must be conveyed through the ErrorState values in the
* FORWARD_COLLISION_WARNING_STATE property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -3751,8 +4047,8 @@
* information must be conveyed through the ErrorState values in the BLIND_SPOT_WARNING_STATE
* property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -3791,8 +4087,8 @@
* high, that information must be conveyed through the ErrorState values in the
* LANE_DEPARTURE_WARNING_STATE property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -3835,8 +4131,8 @@
* high, that information must be conveyed through the ErrorState values in the
* LANE_KEEP_ASSIST_STATE property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -3883,8 +4179,8 @@
* high, that information must be conveyed through the ErrorState values in the
* LANE_CENTERING_ASSIST_STATE property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -3951,8 +4247,8 @@
* low, that information must be conveyed through the ErrorState values in the
* EMERGENCY_LANE_KEEP_ASSIST_STATE property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -3994,8 +4290,8 @@
* information must be conveyed through the ErrorState values in the CRUISE_CONTROL_STATE
* property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
@@ -4019,6 +4315,9 @@
* Trying to write CruiseControlType#OTHER or an ErrorState to this property will throw an
* IllegalArgumentException.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @data_enum CruiseControlType
@@ -4101,6 +4400,9 @@
* When this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is
* false), this property must return StatusCode#NOT_AVAILABLE_DISABLED.
*
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @unit VehicleUnit:MILLI_SECS
@@ -4144,8 +4446,8 @@
* not available due to some temporary state, that information must be conveyed through the
* ErrorState values in the HANDS_ON_DETECTION_STATE property.
*
- * This property is defined as read_write, but OEMs have the option to implement it as read
- * only.
+ * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
+ * implement it as VehiclePropertyAccess.READ only.
*
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE