diff --git a/audio/aidl/Android.bp b/audio/aidl/Android.bp
index d6e6f50..4871058 100644
--- a/audio/aidl/Android.bp
+++ b/audio/aidl/Android.bp
@@ -100,6 +100,7 @@
         "android/hardware/audio/core/MmapBufferDescriptor.aidl",
         "android/hardware/audio/core/ModuleDebug.aidl",
         "android/hardware/audio/core/StreamDescriptor.aidl",
+        "android/hardware/audio/core/SurroundSoundConfig.aidl",
     ],
     imports: [
         "android.hardware.common-V2",
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IConfig.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IConfig.aidl
index fd80715..163b7a0 100644
--- a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IConfig.aidl
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IConfig.aidl
@@ -34,4 +34,5 @@
 package android.hardware.audio.core;
 @VintfStability
 interface IConfig {
+  android.hardware.audio.core.SurroundSoundConfig getSurroundSoundConfig();
 }
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/SurroundSoundConfig.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/SurroundSoundConfig.aidl
new file mode 100644
index 0000000..08a1537
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/SurroundSoundConfig.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@JavaDerive(equals=true, toString=true) @VintfStability
+parcelable SurroundSoundConfig {
+  android.hardware.audio.core.SurroundSoundConfig.SurroundFormatFamily[] formatFamilies;
+  @VintfStability
+  parcelable SurroundFormatFamily {
+    android.media.audio.common.AudioFormatDescription primaryFormat;
+    android.media.audio.common.AudioFormatDescription[] subFormats;
+  }
+}
diff --git a/audio/aidl/android/hardware/audio/core/IConfig.aidl b/audio/aidl/android/hardware/audio/core/IConfig.aidl
index c7bb414..c8ba6be 100644
--- a/audio/aidl/android/hardware/audio/core/IConfig.aidl
+++ b/audio/aidl/android/hardware/audio/core/IConfig.aidl
@@ -16,9 +16,22 @@
 
 package android.hardware.audio.core;
 
+import android.hardware.audio.core.SurroundSoundConfig;
+
 /**
  * This interface provides system-wide configuration parameters for audio I/O
  * (by "system" here we mean the device running Android).
  */
 @VintfStability
-interface IConfig {}
+interface IConfig {
+    /**
+     * Returns the surround sound configuration used for the Audio Policy
+     * Manager initial configuration.
+     *
+     * This method will only be called during the initialization of the Audio
+     * Policy Manager, and must always return the same result.
+     *
+     * @return The surround sound configuration
+     */
+    SurroundSoundConfig getSurroundSoundConfig();
+}
diff --git a/audio/aidl/android/hardware/audio/core/SurroundSoundConfig.aidl b/audio/aidl/android/hardware/audio/core/SurroundSoundConfig.aidl
new file mode 100644
index 0000000..eeda12a
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/SurroundSoundConfig.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+import android.media.audio.common.AudioFormatDescription;
+
+/**
+ * SurroundSoundConfig defines the multi-channel formats that can be enabled on
+ * (primarily TV) devices.
+ */
+@JavaDerive(equals=true, toString=true)
+@VintfStability
+parcelable SurroundSoundConfig {
+    @VintfStability
+    parcelable SurroundFormatFamily {
+        /**
+         * A primaryFormat shall get an entry in the Surround Settings dialog on TV
+         * devices. There must be a corresponding Java ENCODING_... constant
+         * defined in AudioFormat.java, and a display name defined in
+         * AudioFormat.toDisplayName.
+         */
+        AudioFormatDescription primaryFormat;
+        /**
+         * List of formats that shall be equivalent to the primaryFormat from the
+         * users' point of view and don't need a dedicated Surround Settings
+         * dialog entry.
+         */
+        AudioFormatDescription[] subFormats;
+    }
+    SurroundFormatFamily[] formatFamilies;
+}
diff --git a/audio/aidl/default/Config.cpp b/audio/aidl/default/Config.cpp
index 3f7a3d3..0fdd5b4 100644
--- a/audio/aidl/default/Config.cpp
+++ b/audio/aidl/default/Config.cpp
@@ -13,7 +13,17 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
+#define LOG_TAG "AHAL_Module"
+#include <android-base/logging.h>
 
 #include "core-impl/Config.h"
 
-namespace aidl::android::hardware::audio::core {}  // namespace aidl::android::hardware::audio::core
+namespace aidl::android::hardware::audio::core {
+ndk::ScopedAStatus Config::getSurroundSoundConfig(SurroundSoundConfig* _aidl_return) {
+    SurroundSoundConfig surroundSoundConfig;
+    // TODO: parse from XML; for now, use empty config as default
+    *_aidl_return = std::move(surroundSoundConfig);
+    LOG(DEBUG) << __func__ << ": returning " << _aidl_return->toString();
+    return ndk::ScopedAStatus::ok();
+}
+}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/include/core-impl/Config.h b/audio/aidl/default/include/core-impl/Config.h
index b62a14b..4555efd 100644
--- a/audio/aidl/default/include/core-impl/Config.h
+++ b/audio/aidl/default/include/core-impl/Config.h
@@ -20,6 +20,8 @@
 
 namespace aidl::android::hardware::audio::core {
 
-class Config : public BnConfig {};
+class Config : public BnConfig {
+    ndk::ScopedAStatus getSurroundSoundConfig(SurroundSoundConfig* _aidl_return) override;
+};
 
 }  // namespace aidl::android::hardware::audio::core
diff --git a/audio/common/all-versions/default/7.0/HidlUtils.cpp b/audio/common/all-versions/default/7.0/HidlUtils.cpp
index 0fd2947..f89c898 100644
--- a/audio/common/all-versions/default/7.0/HidlUtils.cpp
+++ b/audio/common/all-versions/default/7.0/HidlUtils.cpp
@@ -898,7 +898,7 @@
     for (const auto& transport : transports) {
         switch (transport.audioCapability.getDiscriminator()) {
             case AudioTransport::AudioCapability::hidl_discriminator::profile:
-                if (halPort->num_audio_profiles > AUDIO_PORT_MAX_AUDIO_PROFILES) {
+                if (halPort->num_audio_profiles >= AUDIO_PORT_MAX_AUDIO_PROFILES) {
                     ALOGE("%s, too many audio profiles", __func__);
                     result = BAD_VALUE;
                     break;
@@ -914,7 +914,8 @@
                                 result);
                 break;
             case AudioTransport::AudioCapability::hidl_discriminator::edid:
-                if (halPort->num_extra_audio_descriptors > AUDIO_PORT_MAX_EXTRA_AUDIO_DESCRIPTORS) {
+                if (halPort->num_extra_audio_descriptors >=
+                    AUDIO_PORT_MAX_EXTRA_AUDIO_DESCRIPTORS) {
                     ALOGE("%s, too many extra audio descriptors", __func__);
                     result = BAD_VALUE;
                     break;
diff --git a/audio/common/all-versions/default/tests/hidlutils_tests.cpp b/audio/common/all-versions/default/tests/hidlutils_tests.cpp
index f718e7a..93688fc 100644
--- a/audio/common/all-versions/default/tests/hidlutils_tests.cpp
+++ b/audio/common/all-versions/default/tests/hidlutils_tests.cpp
@@ -954,6 +954,18 @@
     EXPECT_TRUE(audio_port_configs_are_equal(&halConfig, &halConfigBack));
 }
 
+static AudioProfile generateValidAudioProfile() {
+    AudioProfile profile;
+    profile.format = toString(xsd::AudioFormat::AUDIO_FORMAT_PCM_16_BIT);
+    profile.sampleRates.resize(2);
+    profile.sampleRates[0] = 44100;
+    profile.sampleRates[1] = 48000;
+    profile.channelMasks.resize(2);
+    profile.channelMasks[0] = toString(xsd::AudioChannelMask::AUDIO_CHANNEL_OUT_MONO);
+    profile.channelMasks[1] = toString(xsd::AudioChannelMask::AUDIO_CHANNEL_OUT_STEREO);
+    return profile;
+}
+
 TEST(HidlUtils, ConvertInvalidAudioTransports) {
     hidl_vec<AudioTransport> invalid;
     struct audio_port_v7 halInvalid = {};
@@ -973,20 +985,32 @@
     invalid[0].audioCapability.edid(hidl_vec<uint8_t>(EXTRA_AUDIO_DESCRIPTOR_SIZE + 1));
     invalid[1].encapsulationType = "random string";
     EXPECT_EQ(BAD_VALUE, HidlUtils::audioTransportsToHal(invalid, &halInvalid));
+
+    // The size of audio profile must not be greater than the maximum value.
+    invalid.resize(0);
+    invalid.resize(AUDIO_PORT_MAX_AUDIO_PROFILES + 1);
+    for (size_t i = 0; i < invalid.size(); ++i) {
+        invalid[i].audioCapability.profile(generateValidAudioProfile());
+        invalid[i].encapsulationType =
+                toString(xsd::AudioEncapsulationType::AUDIO_ENCAPSULATION_TYPE_NONE);
+    }
+    EXPECT_EQ(BAD_VALUE, HidlUtils::audioTransportsToHal(invalid, &halInvalid));
+
+    // The size of extra audio descriptors must not be greater than the maximum value.
+    invalid.resize(0);
+    invalid.resize(AUDIO_PORT_MAX_EXTRA_AUDIO_DESCRIPTORS + 1);
+    for (size_t i = 0; i < invalid.size(); ++i) {
+        invalid[i].audioCapability.edid({0x11, 0x06, 0x01});
+        invalid[i].encapsulationType =
+                toString(xsd::AudioEncapsulationType::AUDIO_ENCAPSULATION_TYPE_IEC61937);
+    }
+    EXPECT_EQ(BAD_VALUE, HidlUtils::audioTransportsToHal(invalid, &halInvalid));
 }
 
 TEST(HidlUtils, ConvertAudioTransports) {
     hidl_vec<AudioTransport> transports;
     transports.resize(2);
-    AudioProfile profile;
-    profile.format = toString(xsd::AudioFormat::AUDIO_FORMAT_PCM_16_BIT);
-    profile.sampleRates.resize(2);
-    profile.sampleRates[0] = 44100;
-    profile.sampleRates[1] = 48000;
-    profile.channelMasks.resize(2);
-    profile.channelMasks[0] = toString(xsd::AudioChannelMask::AUDIO_CHANNEL_OUT_MONO);
-    profile.channelMasks[1] = toString(xsd::AudioChannelMask::AUDIO_CHANNEL_OUT_STEREO);
-    transports[0].audioCapability.profile(profile);
+    transports[0].audioCapability.profile(generateValidAudioProfile());
     hidl_vec<uint8_t> shortAudioDescriptor({0x11, 0x06, 0x01});
     transports[0].encapsulationType =
             toString(xsd::AudioEncapsulationType::AUDIO_ENCAPSULATION_TYPE_NONE);
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamBuffer.aidl b/camera/device/aidl/android/hardware/camera/device/StreamBuffer.aidl
index e487494..29fec68 100644
--- a/camera/device/aidl/android/hardware/camera/device/StreamBuffer.aidl
+++ b/camera/device/aidl/android/hardware/camera/device/StreamBuffer.aidl
@@ -33,8 +33,8 @@
 parcelable StreamBuffer {
     /**
      * The ID of the stream this buffer is associated with. -1 indicates an
-     * invalid (empty) StreamBuffer, in which case buffer must also point to
-     * null and bufferId must be 0.
+     * invalid (empty) StreamBuffer, in which case buffer must be empty
+     * and bufferId must be 0.
      */
     int streamId;
 
@@ -48,7 +48,7 @@
      * corresponding stream is removed from stream configuration or until camera
      * device session is closed. After the first time a buffer is introduced to
      * HAL, in the future camera service must refer to the same buffer using
-     * only bufferId, and keep the buffer handle null.
+     * only bufferId, and keep the buffer handle empty.
      */
     long bufferId;
 
@@ -59,10 +59,10 @@
      * is not seen by the HAL before, this buffer handle is guaranteed to be a
      * valid handle to a graphics buffer, with dimensions and format matching
      * that of the stream. If the bufferId has been sent to the HAL before, this
-     * buffer handle must be null and HAL must look up the actual buffer handle
+     * buffer handle must be empty and HAL must look up the actual buffer handle
      * to use from its own bufferId to buffer handle map.
      *
-     * For StreamBuffers returned in a CaptureResult, this must be null, since
+     * For StreamBuffers returned in a CaptureResult, this must be empty, since
      * the handle to the buffer is already known to the client (since the client
      * sent it in the matching CaptureRequest), and the handle can be identified
      * by the combination of frame number and stream ID.
@@ -81,11 +81,11 @@
      * The acquire sync fence for this buffer. The HAL must wait on this fence
      * fd before attempting to read from or write to this buffer.
      *
-     * In a buffer included in a CaptureRequest, the client may set this to null
+     * In a buffer included in a CaptureRequest, the client may leave this empty
      * to indicate that no waiting is necessary for this buffer.
      *
      * When the HAL returns an input or output buffer to the framework with
-     * processCaptureResult(), the acquireFence must be set to null. If the HAL
+     * processCaptureResult(), the acquireFence must be empty. If the HAL
      * never waits on the acquireFence due to an error in filling or reading a
      * buffer, when calling processCaptureResult() the HAL must set the
      * releaseFence of the buffer to be the acquireFence passed to it by the
@@ -97,17 +97,17 @@
     /**
      * The release sync fence for this buffer. The HAL must set this to a valid
      * fence fd when returning the input buffer or output buffers to the client
-     * in a CaptureResult, or set it to null to indicate that no waiting is
+     * in a CaptureResult, or leave it empty to indicate that no waiting is
      * required for this buffer.
      *
-     * The client must set this to be null for all buffers included in a
+     * The client must leave this empty for all buffers included in a
      * processCaptureRequest call.
      *
      * After signaling the releaseFence for this buffer, the HAL
      * must not make any further attempts to access this buffer as the
      * ownership has been fully transferred back to the client.
      *
-     * If this is null, then the ownership of this buffer is transferred back
+     * If this is empty, then the ownership of the buffer is transferred back
      * immediately upon the call of processCaptureResult.
      */
     NativeHandle releaseFence;
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
index 20ba9a9..ceb5dcf 100644
--- a/compatibility_matrices/compatibility_matrix.current.xml
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -199,14 +199,6 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="hidl" optional="true">
-        <name>android.hardware.confirmationui</name>
-        <version>1.0</version>
-        <interface>
-            <name>IConfirmationUI</name>
-            <instance>default</instance>
-        </interface>
-    </hal>
     <hal format="aidl" optional="true">
         <name>android.hardware.confirmationui</name>
         <version>1</version>
@@ -672,9 +664,9 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="hidl" optional="false">
+    <hal format="aidl" optional="false">
         <name>android.hardware.thermal</name>
-        <version>2.0</version>
+        <version>1</version>
         <interface>
             <name>IThermal</name>
             <instance>default</instance>
diff --git a/compatibility_matrices/exclude/fcm_exclude.cpp b/compatibility_matrices/exclude/fcm_exclude.cpp
index 6de9d03..cb77c7b 100644
--- a/compatibility_matrices/exclude/fcm_exclude.cpp
+++ b/compatibility_matrices/exclude/fcm_exclude.cpp
@@ -68,6 +68,8 @@
             // does not depend on this HAL, hence it is not declared in any manifests or matrices.
             "android.hardware.fastboot@1.0",
             "android.hardware.fastboot@1.1",
+            // Fastboot AIDL
+            "android.hardware.fastboot",
 
             // Deprecated HALs.
             // HIDL
diff --git a/confirmationui/aidl/vts/functional/VtsHalConfirmationUITargetTest.cpp b/confirmationui/aidl/vts/functional/VtsHalConfirmationUITargetTest.cpp
index bf1f1c8..61dae8b 100644
--- a/confirmationui/aidl/vts/functional/VtsHalConfirmationUITargetTest.cpp
+++ b/confirmationui/aidl/vts/functional/VtsHalConfirmationUITargetTest.cpp
@@ -266,7 +266,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     ASSERT_TRUE(confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {}).isOk());
     // Simulate the user taping ok.
@@ -309,7 +309,7 @@
     static constexpr char test_prompt[] = "D\'oh!";
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + sizeof(test_extra));
     auto result = confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {});
     ASSERT_EQ(IConfirmationUI::UI_ERROR_MESSAGE_TOO_LONG, getReturnCode(result));
@@ -322,7 +322,7 @@
     static constexpr char test_prompt[] = "D\'oh!";
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + sizeof(test_extra));
     auto result = confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {});
     ASSERT_EQ(IConfirmationUI::UI_ERROR_MESSAGE_TOO_LONG, getReturnCode(result));
@@ -334,7 +334,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     ASSERT_TRUE(confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {}).isOk());
 
@@ -355,7 +355,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     ASSERT_TRUE(confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {}).isOk());
 
@@ -377,7 +377,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     ASSERT_TRUE(confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {}).isOk());
 
@@ -399,7 +399,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     ASSERT_TRUE(confirmator_
                         ->promptUserConfirmation(conf_cb, prompt_text, extra, "en",
@@ -424,7 +424,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     ASSERT_TRUE(confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {}).isOk());
 
@@ -446,7 +446,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     ASSERT_TRUE(confirmator_
                         ->promptUserConfirmation(conf_cb, prompt_text, extra, "en",
@@ -469,7 +469,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     auto result = confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {});
     ASSERT_EQ(IConfirmationUI::UI_ERROR_MALFORMED_UTF8ENCODING, getReturnCode(result));
@@ -483,7 +483,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     auto result = confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {});
     ASSERT_EQ(IConfirmationUI::UI_ERROR_MALFORMED_UTF8ENCODING, getReturnCode(result));
@@ -496,7 +496,7 @@
     static constexpr uint8_t test_extra[] = {0x1, 0x2, 0x3};
     shared_ptr<ConfirmationTestCallback> conf_cb =
             ::ndk::SharedRefBase::make<ConfirmationTestCallback>(*this);
-    vector<uint8_t> prompt_text(test_prompt, test_prompt + sizeof(test_prompt));
+    vector<uint8_t> prompt_text(test_prompt, test_prompt + strlen(test_prompt));
     vector<uint8_t> extra(test_extra, test_extra + 3);
     auto result = confirmator_->promptUserConfirmation(conf_cb, prompt_text, extra, "en", {});
     ASSERT_EQ(IConfirmationUI::UI_ERROR_MALFORMED_UTF8ENCODING, getReturnCode(result));
diff --git a/fastboot/OWNERS b/fastboot/OWNERS
new file mode 100644
index 0000000..286b65f
--- /dev/null
+++ b/fastboot/OWNERS
@@ -0,0 +1,4 @@
+# Bug component: 1228891
+dvander@google.com
+elsk@google.com
+dhavale@google.com
diff --git a/fastboot/aidl/Android.bp b/fastboot/aidl/Android.bp
new file mode 100644
index 0000000..a5735ab
--- /dev/null
+++ b/fastboot/aidl/Android.bp
@@ -0,0 +1,38 @@
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//       http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+aidl_interface {
+    name: "android.hardware.fastboot",
+    vendor_available: true,
+    recovery_available: true,
+    srcs: ["android/hardware/fastboot/*.aidl"],
+    stability: "vintf",
+    backend: {
+        cpp: {
+            enabled: false,
+        },
+        java: {
+            enabled: false,
+        },
+    },
+}
diff --git a/fastboot/aidl/aidl_api/android.hardware.fastboot/current/android/hardware/fastboot/FileSystemType.aidl b/fastboot/aidl/aidl_api/android.hardware.fastboot/current/android/hardware/fastboot/FileSystemType.aidl
new file mode 100644
index 0000000..b15d037
--- /dev/null
+++ b/fastboot/aidl/aidl_api/android.hardware.fastboot/current/android/hardware/fastboot/FileSystemType.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.fastboot;
+@Backing(type="byte") @VintfStability
+enum FileSystemType {
+  EXT4 = 0,
+  F2FS = 1,
+  RAW = 2,
+}
diff --git a/fastboot/aidl/aidl_api/android.hardware.fastboot/current/android/hardware/fastboot/IFastboot.aidl b/fastboot/aidl/aidl_api/android.hardware.fastboot/current/android/hardware/fastboot/IFastboot.aidl
new file mode 100644
index 0000000..445fcde
--- /dev/null
+++ b/fastboot/aidl/aidl_api/android.hardware.fastboot/current/android/hardware/fastboot/IFastboot.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.fastboot;
+@VintfStability
+interface IFastboot {
+  String doOemCommand(in String oemCmd);
+  void doOemSpecificErase();
+  int getBatteryVoltageFlashingThreshold();
+  boolean getOffModeChargeState();
+  android.hardware.fastboot.FileSystemType getPartitionType(in String partitionName);
+  String getVariant();
+  const int FAILURE_UNKNOWN = 1;
+}
diff --git a/fastboot/aidl/android/hardware/fastboot/FileSystemType.aidl b/fastboot/aidl/android/hardware/fastboot/FileSystemType.aidl
new file mode 100644
index 0000000..b4027ec
--- /dev/null
+++ b/fastboot/aidl/android/hardware/fastboot/FileSystemType.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.fastboot;
+
+@VintfStability
+@Backing(type="byte")
+enum FileSystemType {
+    /**
+     * Fourth extended file system.
+     */
+    EXT4,
+    /**
+     * Flash Friendly File System.
+     */
+    F2FS,
+    /**
+     * Raw file system.
+     */
+    RAW,
+}
diff --git a/fastboot/aidl/android/hardware/fastboot/IFastboot.aidl b/fastboot/aidl/android/hardware/fastboot/IFastboot.aidl
new file mode 100644
index 0000000..abdc215
--- /dev/null
+++ b/fastboot/aidl/android/hardware/fastboot/IFastboot.aidl
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.fastboot;
+
+import android.hardware.fastboot.FileSystemType;
+
+/**
+ * IFastboot interface implements vendor specific fastboot commands.
+ */
+@VintfStability
+interface IFastboot {
+    /**
+     * Status code for function.
+     * Operation failed due to unknown reason.
+     */
+    const int FAILURE_UNKNOWN = 1;
+    /**
+     * Executes a fastboot OEM command.
+     *
+     * @param oemCmd The oem command that is passed to the fastboot HAL.
+     * @return optional String if the operation is successful and output is expected
+     *         for the command.
+     * @throws :
+     *         - EX_ILLEGAL_ARGUMENT for bad arguments.
+     *         - EX_UNSUPPORTED_OPERATION for unsupported commands.
+     *         - EX_SERVICE_SPECIFIC with status FAILURE_UNKNOWN for other errors.
+     */
+    String doOemCommand(in String oemCmd);
+
+    /**
+     * Executes an OEM specific erase after fastboot erase userdata.
+     *
+     * @throws :
+     *         - EX_UNSUPPORTED_OPERATION if it is not supported.
+     *         - EX_SERVICE_SPECIFIC with status FAILURE_UNKNOWN for
+     *           unknown error in oem specific command or other errors.
+     */
+    void doOemSpecificErase();
+
+    /**
+     * Returns the minimum battery voltage required for flashing in mV.
+     *
+     * @return Minimum batterery voltage (in mV) required for flashing to
+     *         be successful.
+     * @throws :
+     *         - EX_SERVICE_SPECIFIC with status FAILURE_UNKNOWN if error.
+     */
+    int getBatteryVoltageFlashingThreshold();
+
+    /**
+     * Returns whether off-mode-charging is enabled. If enabled, the device
+     *      autoboots into a special mode when power is applied.
+     *
+     * @return Returns whether off-mode-charging is enabled.
+     * @throws :
+     *         - EX_SERVICE_SPECIFIC with status FAILURE_UNKNOWN if error.
+     */
+    boolean getOffModeChargeState();
+
+    /**
+     * Returns the file system type of the partition. Implementation is only
+     *       required for physical partitions that need to be wiped and reformatted.
+     * @param in partitionName Name of the partition.
+     * @return Returns the file system type of the partition. Type can be ext4,
+     *         f2fs or raw.
+     * @throws :
+     *         - EX_SERVICE_SPECIFIC with status FAILURE_UNKNOWN if the partition
+     *           is invalid or does not require reformatting.
+     */
+    FileSystemType getPartitionType(in String partitionName);
+
+    /**
+     * Returns an OEM-defined string indicating the variant of the device, for
+     * example, US and ROW.
+     * @return Indicates the device variant.
+     * @throws :
+     *         - EX_SERVICE_SPECIFIC with status FAILURE_UNKNOWN if error.
+     */
+    String getVariant();
+}
diff --git a/fastboot/aidl/default/Android.bp b/fastboot/aidl/default/Android.bp
new file mode 100644
index 0000000..5cd4542
--- /dev/null
+++ b/fastboot/aidl/default/Android.bp
@@ -0,0 +1,39 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_library {
+    name: "android.hardware.fastboot-impl-mock",
+    recovery: true,
+    srcs: [
+        "Fastboot.cpp",
+    ],
+    relative_install_path: "hw",
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+        "libutils",
+        "libcutils",
+        "android.hardware.fastboot-V1-ndk",
+    ],
+}
diff --git a/fastboot/aidl/default/Fastboot.cpp b/fastboot/aidl/default/Fastboot.cpp
new file mode 100644
index 0000000..1ba73d3
--- /dev/null
+++ b/fastboot/aidl/default/Fastboot.cpp
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Fastboot.h"
+
+using ndk::ScopedAStatus;
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace fastboot {
+
+ScopedAStatus Fastboot::getPartitionType(const std::string& in_partitionName,
+                                         FileSystemType* _aidl_return) {
+    if (in_partitionName.empty()) {
+        return ScopedAStatus::fromExceptionCodeWithMessage(EX_ILLEGAL_ARGUMENT,
+                                                           "Invalid partition name");
+    }
+    *_aidl_return = FileSystemType::RAW;
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Fastboot::doOemCommand(const std::string& in_oemCmd, std::string* _aidl_return) {
+    *_aidl_return = "";
+    if (in_oemCmd.empty()) {
+        return ScopedAStatus::fromExceptionCodeWithMessage(EX_ILLEGAL_ARGUMENT, "Invalid command");
+    }
+    return ScopedAStatus::fromExceptionCodeWithMessage(
+            EX_UNSUPPORTED_OPERATION, "Command not supported in default implementation");
+}
+
+ScopedAStatus Fastboot::getVariant(std::string* _aidl_return) {
+    *_aidl_return = "NA";
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Fastboot::getOffModeChargeState(bool* _aidl_return) {
+    *_aidl_return = false;
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Fastboot::getBatteryVoltageFlashingThreshold(int32_t* _aidl_return) {
+    *_aidl_return = 0;
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Fastboot::doOemSpecificErase() {
+    return ScopedAStatus::fromExceptionCodeWithMessage(
+            EX_UNSUPPORTED_OPERATION, "Command not supported in default implementation");
+}
+
+}  // namespace fastboot
+}  // namespace hardware
+}  // namespace android
+}  // namespace aidl
diff --git a/fastboot/aidl/default/Fastboot.h b/fastboot/aidl/default/Fastboot.h
new file mode 100644
index 0000000..48e2c38
--- /dev/null
+++ b/fastboot/aidl/default/Fastboot.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include "aidl/android/hardware/fastboot/BnFastboot.h"
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace fastboot {
+class Fastboot : public BnFastboot {
+    ::ndk::ScopedAStatus doOemCommand(const std::string& in_oemCmd,
+                                      std::string* _aidl_return) override;
+    ::ndk::ScopedAStatus doOemSpecificErase() override;
+    ::ndk::ScopedAStatus getBatteryVoltageFlashingThreshold(int32_t* _aidl_return) override;
+    ::ndk::ScopedAStatus getOffModeChargeState(bool* _aidl_return) override;
+    ::ndk::ScopedAStatus getPartitionType(
+            const std::string& in_partitionName,
+            ::aidl::android::hardware::fastboot::FileSystemType* _aidl_return) override;
+    ::ndk::ScopedAStatus getVariant(std::string* _aidl_return) override;
+};
+
+}  // namespace fastboot
+}  // namespace hardware
+}  // namespace android
+}  // namespace aidl
diff --git a/security/keymint/RKP_CHANGELOG.md b/security/keymint/RKP_CHANGELOG.md
index dfcc938..243fc26 100644
--- a/security/keymint/RKP_CHANGELOG.md
+++ b/security/keymint/RKP_CHANGELOG.md
@@ -21,13 +21,13 @@
 ## IRemotelyProvisionedComponent 2 -> 3
 * ProtectedData has been removed.
 * DeviceInfo
-  * `cert_type` has been added, with values corresponding to `widevine` or `keymint`
   * `version` has moved to a top-level field within the CSR generated by the HAL
 * IRemotelyProvisionedComponent
   * The need for an EEK has been removed. There is no longer an encrypted portion of the CSR.
   * Test mode has been removed.
   * The schema for the CSR itself has been significantly simplified, please see
-    IRemotelyProvisionedComponent.aidl for more details.
-    * Notably, the chain of signing, MACing, and encryption operations has been replaced with a single
+    IRemotelyProvisionedComponent.aidl for more details. Notably,
+    * the chain of signing, MACing, and encryption operations has been replaced with a single
       COSE_Sign1 object.
+    * CertificateType has been added to identify the type of certificate being requested.
 
diff --git a/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl b/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl
index 6854851..f0af619 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl
@@ -49,16 +49,7 @@
      *         "security_level" : "tee" / "strongbox",
      *         "fused": 1 / 0,  ; 1 if secure boot is enforced for the processor that the IRPC
      *                          ; implementation is contained in. 0 otherwise.
-     *         "cert_type": CertificateType;
      *     }
-     *
-     *     ; A tstr identifying the type of certificate. The set of supported certificate types may
-     *     ; be extended without requiring a version bump of the HAL. Custom certificate types may
-     *     ; be used, but the provisioning server may reject the request for an unknown certificate
-     *     ; type. The currently defined certificate types are:
-     *     ;  - "widevine"
-     *     ;  - "keymint"
-     *     CertificateType = tstr
      */
     byte[] deviceInfo;
 }
diff --git a/security/keymint/aidl/android/hardware/security/keymint/IRemotelyProvisionedComponent.aidl b/security/keymint/aidl/android/hardware/security/keymint/IRemotelyProvisionedComponent.aidl
index 3f1f2f7..86c1717 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/IRemotelyProvisionedComponent.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/IRemotelyProvisionedComponent.aidl
@@ -29,7 +29,7 @@
  * validate the request and create certificates.
  *
  * This interface does not provide any way to use the generated and certified key pairs. It's
- * intended to be implemented by a HAL service that does other things with keys (e.g. Keymint).
+ * intended to be implemented by a HAL service that does other things with keys (e.g. KeyMint).
  *
  * The root of trust for secure provisioning is something called the Device Identifier Composition
  * Engine (DICE) Chain. The DICE Chain is a chain of certificates, represented as COSE_Sign1 objects
@@ -79,9 +79,9 @@
  * While a proper DICE Chain, as described above, reflects the complete boot sequence from boot ROM
  * to the secure area image of the IRemotelyProvisionedComponent, it's also possible to use a
  * "degenerate" DICE Chain which consists only of a single, self-signed certificate containing the
- * public key of a hardware-bound key pair. This is an appopriate solution for devices which haven't
- * implemented everything necessary to produce a proper DICE Chain, but can derive a unique key pair
- * in the secure area. In this degenerate case, UDS_Pub is the same as CDI_Leaf_Pub.
+ * public key of a hardware-bound key pair. This is an appropriate solution for devices which
+ * haven't implemented everything necessary to produce a proper DICE Chain, but can derive a unique
+ * key pair in the secure area. In this degenerate case, UDS_Pub is the same as CDI_Leaf_Pub.
  *
  * DICE Chain Privacy
  * ==================
@@ -171,7 +171,7 @@
      *        If testMode is false, the keysToCertify array must not contain any keys flagged as
      *        test keys. Otherwise, the method must return STATUS_TEST_KEY_IN_PRODUCTION_REQUEST.
      *
-     * @param in endpointEncryptionKey contains an X22519 public key which will be used to encrypt
+     * @param in endpointEncryptionKey contains an X25519 public key which will be used to encrypt
      *        the BCC. For flexibility, this is represented as a certificate chain, represented as a
      *        CBOR array of COSE_Sign1 objects, ordered from root to leaf. The leaf contains the
      *        X25519 encryption key, each other element is an Ed25519 key signing the next in the
@@ -198,7 +198,7 @@
      *                 -2 : bstr                      ; Ed25519 public key
      *            }
      *
-     *            SignatureKeyP256 = {
+     *            SignatureKeyP256 = {                ; COSE_Key
      *                 1 : 2,                         ; Key type : EC2
      *                 3 : AlgorithmES256,            ; Algorithm
      *                 -1 : 1,                        ; Curve: P256
@@ -228,7 +228,7 @@
      *                2 : bstr             ; KID : EEK ID
      *                3 : -25,             ; Algorithm : ECDH-ES + HKDF-256
      *                -1 : 4,              ; Curve : X25519
-     *                -2 : bstr            ; Ed25519 public key
+     *                -2 : bstr            ; X25519 public key
      *            }
      *
      *            EekP256 = {              ; COSE_Key
@@ -247,8 +247,8 @@
      *                payload: bstr .cbor EekX25519 / .cbor EekP256
      *            ]
      *
-     *            AlgorithmES256 = -7
-     *            AlgorithmEdDSA = -8
+     *            AlgorithmES256 = -7      ; RFC 8152 section 8.1
+     *            AlgorithmEdDSA = -8      ; RFC 8152 section 8.2
      *
      *        If the contents of endpointEncryptionKey do not match the SignedEek structure above,
      *        the method must return STATUS_INVALID_EEK.
@@ -257,7 +257,7 @@
      *        in the chain, which implies that it must not attempt to validate the signature.
      *
      *        If testMode is false, the method must validate the chain signatures, and must verify
-     *        that the public key in the root certifictate is in its pre-configured set of
+     *        that the public key in the root certificate is in its pre-configured set of
      *        authorized EEK root keys. If the public key is not in the database, or if signature
      *        verification fails, the method must return STATUS_INVALID_EEK.
      *
@@ -271,7 +271,7 @@
      * @param out ProtectedData contains the encrypted BCC and the ephemeral MAC key used to
      *        authenticate the keysToSign (see keysToSignMac output argument).
      *
-     * @return The of KeysToSign in the CertificateRequest structure. Specifically, it contains:
+     * @return The MAC of KeysToSign in the CertificateRequest structure. Specifically, it contains:
      *
      *            HMAC-256(EK_mac, .cbor KeysToMacStructure)
      *
@@ -315,38 +315,50 @@
      *
      * @return the following CBOR Certificate Signing Request (Csr) serialized into a byte array:
      *
-     * Csr = [
-     *    version: 3,              ; The CDDL Schema version.
-     *    UdsCerts,
-     *    DiceCertChain,
-     *    SignedData
-     * ]
+     * Csr = AuthenticatedMessage<CsrPayload>
      *
-     * ; COSE_Sign1 (untagged)
-     * SignedData = [
-     *     protected: bstr .cbor { 1 : AlgorithmEdDSA / AlgorithmES256 },
-     *     unprotected: {},
-     *     payload: bstr .cbor SignedDataPayload,
-     *     signature: bstr            ; PureEd25519(CDI_Leaf_Priv, bstr .cbor SignedDataSigStruct) /
-     *                                ; ECDSA(CDI_Leaf_Priv, bstr .cbor SignedDataSigStruct)
-     * ]
-     *
-     * ; Sig_structure for SignedData
-     * SignedDataSigStruct = [
-     *     context: "Signature1",
-     *     protected: bstr .cbor { 1 : AlgorithmEdDSA / AlgorithmES256 },
-     *     external_aad: bstr .size 0,
-     *     payload: bstr .cbor SignedDataPayload
-     * ]
-     *
-     * SignedDataPayload = [               ; CBOR Array defining the payload for SignedData
+     * CsrPayload = [                      ; CBOR Array defining the payload for Csr
+     *     version: 1,                     ; The CsrPayload CDDL Schema version.
+     *     CertificateType,                ; The type of certificate being requested.
      *     DeviceInfo,                     ; Defined in DeviceInfo.aidl
      *     challenge: bstr .size (32..64), ; Provided by the method parameters
      *     KeysToSign,                     ; Provided by the method parameters
      * ]
      *
+     *  ; A tstr identifying the type of certificate. The set of supported certificate types may
+     *  ; be extended without requiring a version bump of the HAL. Custom certificate types may
+     *  ; be used, but the provisioning server may reject the request for an unknown certificate
+     *  ; type. The currently defined certificate types are:
+     *  ;  - "widevine"
+     *  ;  - "keymint"
+     *  CertificateType = tstr
+     *
      * KeysToSign = [ * PublicKey ]   ; Please see MacedPublicKey.aidl for the PublicKey definition.
      *
+     * AuthenticatedMessage<T> = [
+     *    version: 3,              ; The AuthenticatedMessage CDDL Schema version.
+     *    UdsCerts,
+     *    DiceCertChain,
+     *    SignedData<T>,
+     * ]
+     *
+     * ; COSE_Sign1 (untagged)
+     * SignedData<T> = [
+     *     protected: bstr .cbor { 1 : AlgorithmEdDSA / AlgorithmES256 },
+     *     unprotected: {},
+     *     payload: bstr .cbor T / nil,
+     *     signature: bstr         ; PureEd25519(CDI_Leaf_Priv, bstr .cbor SignedDataSigStruct<T>) /
+     *                             ; ECDSA(CDI_Leaf_Priv, bstr .cbor SignedDataSigStruct<T>)
+     * ]
+     *
+     * ; Sig_structure for SignedData
+     * SignedDataSigStruct<T> = [
+     *     context: "Signature1",
+     *     protected: bstr .cbor { 1 : AlgorithmEdDSA / AlgorithmES256 },
+     *     external_aad: bstr .size 0,
+     *     payload: bstr .cbor T
+     * ]
+     *
      * ; UdsCerts allows the platform to provide additional certifications for the UDS_Pub. For
      * ; example, this could be provided by the hardware vendor, who certifies all of their chips.
      * ; The SignerName is a free-form string describing who generated the signature. The root
@@ -366,7 +378,7 @@
      *                              ; intermediate certificates between Root and Leaf.
      * ]
      *
-     * ; A bstr containing a DER-encoded X.509 certificate (RSA, NIST P-curve, or edDSA)
+     * ; A bstr containing a DER-encoded X.509 certificate (RSA, NIST P-curve, or EdDSA)
      * X509Certificate = bstr
      *
      * ; The DICE Chain contains measurements about the device firmware.
diff --git a/thermal/OWNERS b/thermal/OWNERS
new file mode 100644
index 0000000..7229b22
--- /dev/null
+++ b/thermal/OWNERS
@@ -0,0 +1,5 @@
+# Bug component: 826709
+
+# ADPF virtual team
+lpy@google.com
+wvw@google.com
diff --git a/thermal/aidl/Android.bp b/thermal/aidl/Android.bp
new file mode 100644
index 0000000..b132746
--- /dev/null
+++ b/thermal/aidl/Android.bp
@@ -0,0 +1,39 @@
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+aidl_interface {
+    name: "android.hardware.thermal",
+    vendor_available: true,
+    srcs: [
+        "android/hardware/thermal/*.aidl",
+    ],
+    stability: "vintf",
+    backend: {
+        cpp: {
+            enabled: true,
+        },
+        java: {
+            platform_apis: true,
+        },
+    },
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/CoolingDevice.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/CoolingDevice.aidl
new file mode 100644
index 0000000..50be508
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/CoolingDevice.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+1 *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@VintfStability
+parcelable CoolingDevice {
+  android.hardware.thermal.CoolingType type;
+  String name;
+  long value;
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/CoolingType.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/CoolingType.aidl
new file mode 100644
index 0000000..57c8939
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/CoolingType.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@Backing(type="int") @VintfStability
+enum CoolingType {
+  FAN = 0,
+  BATTERY = 1,
+  CPU = 2,
+  GPU = 3,
+  MODEM = 4,
+  NPU = 5,
+  COMPONENT = 6,
+  TPU = 7,
+  POWER_AMPLIFIER = 8,
+  DISPLAY = 9,
+  SPEAKER = 10,
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/IThermal.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/IThermal.aidl
new file mode 100644
index 0000000..0aed5ec
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/IThermal.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@VintfStability
+interface IThermal {
+  android.hardware.thermal.CoolingDevice[] getCoolingDevices();
+  android.hardware.thermal.CoolingDevice[] getCoolingDevicesWithType(in android.hardware.thermal.CoolingType type);
+  android.hardware.thermal.Temperature[] getTemperatures();
+  android.hardware.thermal.Temperature[] getTemperaturesWithType(in android.hardware.thermal.TemperatureType type);
+  android.hardware.thermal.TemperatureThreshold[] getTemperatureThresholds();
+  android.hardware.thermal.TemperatureThreshold[] getTemperatureThresholdsWithType(in android.hardware.thermal.TemperatureType type);
+  void registerThermalChangedCallback(in android.hardware.thermal.IThermalChangedCallback callback);
+  void registerThermalChangedCallbackWithType(in android.hardware.thermal.IThermalChangedCallback callback, in android.hardware.thermal.TemperatureType type);
+  void unregisterThermalChangedCallback(in android.hardware.thermal.IThermalChangedCallback callback);
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/IThermalChangedCallback.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/IThermalChangedCallback.aidl
new file mode 100644
index 0000000..6b3f922
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/IThermalChangedCallback.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@VintfStability
+interface IThermalChangedCallback {
+  oneway void notifyThrottling(in android.hardware.thermal.Temperature temperature);
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/Temperature.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/Temperature.aidl
new file mode 100644
index 0000000..7156415
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/Temperature.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@VintfStability
+parcelable Temperature {
+  android.hardware.thermal.TemperatureType type;
+  String name;
+  float value;
+  android.hardware.thermal.ThrottlingSeverity throttlingStatus;
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/TemperatureThreshold.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/TemperatureThreshold.aidl
new file mode 100644
index 0000000..6da561f
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/TemperatureThreshold.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@VintfStability
+parcelable TemperatureThreshold {
+  android.hardware.thermal.TemperatureType type;
+  String name;
+  float[] hotThrottlingThresholds;
+  float[] coldThrottlingThresholds;
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/TemperatureType.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/TemperatureType.aidl
new file mode 100644
index 0000000..c6a08c1
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/TemperatureType.aidl
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@Backing(type="int") @VintfStability
+enum TemperatureType {
+  UNKNOWN = -1,
+  CPU = 0,
+  GPU = 1,
+  BATTERY = 2,
+  SKIN = 3,
+  USB_PORT = 4,
+  POWER_AMPLIFIER = 5,
+  BCL_VOLTAGE = 6,
+  BCL_CURRENT = 7,
+  BCL_PERCENTAGE = 8,
+  NPU = 9,
+  TPU = 10,
+  DISPLAY = 11,
+  MODEM = 12,
+  SOC = 13,
+}
diff --git a/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/ThrottlingSeverity.aidl b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/ThrottlingSeverity.aidl
new file mode 100644
index 0000000..e86b581
--- /dev/null
+++ b/thermal/aidl/aidl_api/android.hardware.thermal/current/android/hardware/thermal/ThrottlingSeverity.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.thermal;
+@Backing(type="int") @VintfStability
+enum ThrottlingSeverity {
+  NONE = 0,
+  LIGHT = 1,
+  MODERATE = 2,
+  SEVERE = 3,
+  CRITICAL = 4,
+  EMERGENCY = 5,
+  SHUTDOWN = 6,
+}
diff --git a/thermal/aidl/android/hardware/thermal/CoolingDevice.aidl b/thermal/aidl/android/hardware/thermal/CoolingDevice.aidl
new file mode 100644
index 0000000..6d974a5
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/CoolingDevice.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+1 *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+import android.hardware.thermal.CoolingType;
+
+@VintfStability
+parcelable CoolingDevice {
+    /**
+     * This cooling device type, CPU, GPU, BATTERY, and etc.
+     */
+    CoolingType type;
+    /**
+     * Name of this cooling device.
+     * All cooling devices of the same "type" must have a different "name".
+     * The name is usually defined in kernel device tree, and this is for client
+     * logging purpose.
+     */
+    String name;
+    /**
+     * Current throttle state of the cooling device. The value can any unsigned integer
+     * numbers between 0 and max_state defined in its driver, usually representing the
+     * associated device's power state. 0 means device is not in throttling, higher value
+     * means deeper throttling.
+     */
+    long value;
+}
diff --git a/thermal/aidl/android/hardware/thermal/CoolingType.aidl b/thermal/aidl/android/hardware/thermal/CoolingType.aidl
new file mode 100644
index 0000000..1b430d2
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/CoolingType.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+/**
+ * Device cooling device types
+ */
+@VintfStability
+@Backing(type="int")
+enum CoolingType {
+    FAN,
+    BATTERY,
+    CPU,
+    GPU,
+    MODEM,
+    NPU,
+    COMPONENT,
+    TPU,
+    POWER_AMPLIFIER,
+    DISPLAY,
+    SPEAKER,
+}
diff --git a/thermal/aidl/android/hardware/thermal/IThermal.aidl b/thermal/aidl/android/hardware/thermal/IThermal.aidl
new file mode 100644
index 0000000..8b79cb4
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/IThermal.aidl
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+import android.hardware.thermal.CoolingDevice;
+import android.hardware.thermal.CoolingType;
+import android.hardware.thermal.IThermalChangedCallback;
+import android.hardware.thermal.Temperature;
+import android.hardware.thermal.TemperatureThreshold;
+import android.hardware.thermal.TemperatureType;
+
+@VintfStability
+interface IThermal {
+    /**
+     * Retrieves the cooling devices information.
+     *
+     * @return devices If succeed, it's filled with the
+     *    current cooling device information. The order of built-in cooling
+     *    devices in the list must be kept the same regardless the number
+     *    of calls to this method even if they go offline, if these devices
+     *    exist on boot. The method always returns and never removes from
+     *    the list such cooling devices.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, getMessage() must be populated with the human-readable
+     *    error message.
+     */
+    CoolingDevice[] getCoolingDevices();
+
+    /**
+     * Retrieves the cooling devices information of a given CoolingType.
+     *
+     * @param type the CoolingDevice such as CPU/GPU.
+     *
+     * @return devices If succeed, it's filled with the current
+     *    cooling device information. The order of built-in cooling
+     *    devices in the list must be kept the same regardless of the number
+     *    of calls to this method even if they go offline, if these devices
+     *    exist on boot. The method always returns and never removes from
+     *    the list such cooling devices.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message.
+     */
+    CoolingDevice[] getCoolingDevicesWithType(in CoolingType type);
+
+    /**
+     * Retrieves temperatures in Celsius.
+     *
+     * @return temperatures If succeed, it's filled with the
+     *    current temperatures. The order of temperatures of built-in
+     *    devices (such as CPUs, GPUs and etc.) in the list must be kept
+     *    the same regardless the number of calls to this method even if
+     *    they go offline, if these devices exist on boot. The method
+     *    always returns and never removes such temperatures.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message.
+     */
+    Temperature[] getTemperatures();
+
+    /**
+     * Retrieves temperatures in Celsius with a given TemperatureType.
+     *
+     * @param type the TemperatureType such as battery or skin.
+     *
+     * @return temperatures If succeed, it's filled with the
+     *    current temperatures. The order of temperatures of built-in
+     *    devices (such as CPUs, GPUs and etc.) in the list must be kept
+     *    the same regardless of the number of calls to this method even if
+     *    they go offline, if these devices exist on boot. The method
+     *    always returns and never removes such temperatures.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message.
+     */
+    Temperature[] getTemperaturesWithType(in TemperatureType type);
+
+    /**
+     * Retrieves static temperature thresholds in Celsius.
+     *
+     * @return temperatureThresholds If succeed, it's filled with the
+     *    temperatures thresholds. The order of temperatures of built-in
+     *    devices (such as CPUs, GPUs and etc.) in the list must be kept
+     *    the same regardless of the number of calls to this method even if
+     *    they go offline, if these devices exist on boot. The method
+     *    always returns and never removes such temperatures. The thresholds
+     *    are returned as static values and must not change across calls. The actual
+     *    throttling state is determined in device thermal mitigation policy/agorithm
+     *    which might not be simple thresholds so these values Thermal HAL provided
+     *    may not be accurate to detemin the throttling status. To get accurate
+     *    throttling status, use getTemperatures or registerThermalChangedCallback
+     *    and listen to the callback.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message.
+     */
+    TemperatureThreshold[] getTemperatureThresholds();
+
+    /**
+     * Retrieves static temperature thresholds in Celsius of a given temperature
+     * type.
+     *
+     * @param type the TemperatureType such as battery or skin.
+     *
+     * @return temperatureThresholds If succeed, it's filled with the
+     *    temperatures thresholds. The order of temperatures of built-in
+     *    devices (such as CPUs, GPUs and etc.) in the list must be kept
+     *    the same regardless of the number of calls to this method even if
+     *    they go offline, if these devices exist on boot. The method
+     *    always returns and never removes such temperatures. The thresholds
+     *    are returned as static values and must not change across calls. The actual
+     *    throttling state is determined in device thermal mitigation policy/agorithm
+     *    which might not be simple thresholds so these values Thermal HAL provided
+     *    may not be accurate to detemin the throttling status. To get accurate
+     *    throttling status, use getTemperatures or registerThermalChangedCallback
+     *    and listen to the callback.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message.
+     */
+    TemperatureThreshold[] getTemperatureThresholdsWithType(in TemperatureType type);
+
+    /**
+     * Register an IThermalChangedCallback, used by the Thermal HAL to receive
+     * thermal events when thermal mitigation status changed.
+     * Multiple registrations with different IThermalChangedCallback must be allowed.
+     * Multiple registrations with same IThermalChangedCallback is not allowed, client
+     * should unregister the given IThermalChangedCallback first.
+     *
+     * @param callback the IThermalChangedCallback to use for receiving
+     *    thermal events. if nullptr callback is given, the status code will be
+     *    STATUS_BAD_VALUE and the operation will fail.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message. If callback is given nullptr, the returned status code
+     *    will be STATUS_BAD_VALUE and the exception will be EX_ILLEGAL_ARGUMENT.
+     *    if callback is already registered, the returned status code will be
+     *    STATUS_INVALID_OPERATION, the exception will be EX_ILLEGAL_ARGUMENT.
+     */
+    void registerThermalChangedCallback(in IThermalChangedCallback callback);
+
+    /**
+     * Register an IThermalChangedCallback for a given TemperatureType, used by
+     * the Thermal HAL to receive thermal events when thermal mitigation status
+     * changed.
+     * Multiple registrations with different IThermalChangedCallback must be allowed.
+     * Multiple registrations with same IThermalChangedCallback is not allowed, client
+     * should unregister the given IThermalChangedCallback first.
+     *
+     * @param callback the IThermalChangedCallback to use for receiving
+     *    thermal events. if nullptr callback is given, the status code will be
+     *    STATUS_BAD_VALUE and the operation will fail.
+     * @param type the type to be filtered.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message. If callback is given nullptr, the returned status code
+     *    will be STATUS_BAD_VALUE and the exception will be EX_ILLEGAL_ARGUMENT.
+     *    if callback is already registered, the returned status code will be
+     *    STATUS_INVALID_OPERATION, the exception will be EX_ILLEGAL_ARGUMENT.
+     */
+    void registerThermalChangedCallbackWithType(
+            in IThermalChangedCallback callback, in TemperatureType type);
+
+    /**
+     * Unregister an IThermalChangedCallback, used by the Thermal HAL
+     * to receive thermal events when thermal mitigation status changed.
+     *
+     * @param callback the IThermalChangedCallback to use for receiving
+     *    thermal events. if nullptr callback is given, the status code will be
+     *    STATUS_BAD_VALUE and the operation will fail.
+     *
+     * @throws ScopedAStatus Status of the operation. If status code is not
+     *    STATUS_OK, the getMessage() must be populated with the human-readable
+     *    error message. If callback is given nullptr, the returned status code
+     *    will be STATUS_BAD_VALUE and the exception will be EX_ILLEGAL_ARGUMENT.
+     *    if callback is not registered, the returned status code will be
+     *    STATUS_INVALID_OPERATION, the exception will be EX_ILLEGAL_ARGUMENT.
+     */
+    void unregisterThermalChangedCallback(in IThermalChangedCallback callback);
+}
diff --git a/thermal/aidl/android/hardware/thermal/IThermalChangedCallback.aidl b/thermal/aidl/android/hardware/thermal/IThermalChangedCallback.aidl
new file mode 100644
index 0000000..6fe2dac
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/IThermalChangedCallback.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+import android.hardware.thermal.Temperature;
+
+/**
+ * IThermalChangedCallback send throttling notification to clients.
+ */
+@VintfStability
+interface IThermalChangedCallback {
+    /**
+     * Send a thermal throttling event to all ThermalHAL
+     * thermal event listeners.
+     *
+     * @param temperature The temperature associated with the
+     *    throttling event.
+     */
+    oneway void notifyThrottling(in Temperature temperature);
+}
diff --git a/thermal/aidl/android/hardware/thermal/Temperature.aidl b/thermal/aidl/android/hardware/thermal/Temperature.aidl
new file mode 100644
index 0000000..f0041ed
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/Temperature.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+import android.hardware.thermal.TemperatureType;
+import android.hardware.thermal.ThrottlingSeverity;
+
+@VintfStability
+parcelable Temperature {
+    /**
+     * This temperature's type.
+     */
+    TemperatureType type;
+    /**
+     * Name of this temperature matching the TemperatureThreshold.
+     * All temperatures of the same "type" must have a different "name",
+     * e.g., cpu0, battery. Clients use it to match with TemperatureThreshold
+     * struct.
+     */
+    String name;
+    /**
+     * For BCL, this is the current reading of the virtual sensor and the unit is
+     * millivolt, milliamp, percentage for BCL_VOLTAGE, BCL_CURRENT and BCL_PERCENTAGE
+     * respectively. For everything else, this is the current temperature in Celsius.
+     * If not available set by HAL to NAN.
+     */
+    float value;
+    /**
+     * The current throttling level of the sensor.
+     */
+    ThrottlingSeverity throttlingStatus;
+}
diff --git a/thermal/aidl/android/hardware/thermal/TemperatureThreshold.aidl b/thermal/aidl/android/hardware/thermal/TemperatureThreshold.aidl
new file mode 100644
index 0000000..9ecdab3
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/TemperatureThreshold.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+import android.hardware.thermal.TemperatureType;
+
+@VintfStability
+parcelable TemperatureThreshold {
+    /**
+     * This temperature's type.
+     */
+    TemperatureType type;
+    /**
+     * Name of this temperature matching the Temperature struct.
+     * All temperatures of the same "type" must have a different "name",
+     * e.g., cpu0, battery. Clients use it to match Temperature struct.
+     */
+    String name;
+    /**
+     * Hot throttling temperature constant for this temperature sensor in
+     * level defined in ThrottlingSeverity including shutdown. Throttling
+     * happens when temperature >= threshold. If not available, set to NAN.
+     * Unit is same as Temperature's value.
+     * The number of thresholds must be the same as ThrottlingSeverity#len.
+     */
+    float[] hotThrottlingThresholds;
+    /**
+     * Cold throttling temperature constant for this temperature sensor in
+     * level defined in ThrottlingSeverity including shutdown. Throttling
+     * happens when temperature <= threshold. If not available, set to NAN.
+     * Unit is same as Temperature's value.
+     * The number of theresholds must be the same as ThrottlingSeverity#len.
+     */
+    float[] coldThrottlingThresholds;
+}
diff --git a/thermal/aidl/android/hardware/thermal/TemperatureType.aidl b/thermal/aidl/android/hardware/thermal/TemperatureType.aidl
new file mode 100644
index 0000000..aebe7ce
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/TemperatureType.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+/**
+ * Device temperature types
+ */
+@VintfStability
+@Backing(type="int")
+enum TemperatureType {
+    UNKNOWN = -1,
+    CPU = 0,
+    GPU = 1,
+    BATTERY = 2,
+    SKIN = 3,
+    USB_PORT = 4,
+    POWER_AMPLIFIER = 5,
+    /**
+     * Battery Current Limit - virtual sensors
+     */
+    BCL_VOLTAGE = 6,
+    BCL_CURRENT = 7,
+    BCL_PERCENTAGE = 8,
+    /**
+     * Neural Processing Unit
+     */
+    NPU = 9,
+    TPU = 10,
+    DISPLAY = 11,
+    MODEM = 12,
+    SOC = 13,
+}
diff --git a/thermal/aidl/android/hardware/thermal/ThrottlingSeverity.aidl b/thermal/aidl/android/hardware/thermal/ThrottlingSeverity.aidl
new file mode 100644
index 0000000..29f0724
--- /dev/null
+++ b/thermal/aidl/android/hardware/thermal/ThrottlingSeverity.aidl
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.thermal;
+
+/**
+ * Device throttling severity
+ */
+@VintfStability
+@Backing(type="int")
+enum ThrottlingSeverity {
+    /**
+     * Not under throttling.
+     */
+    NONE = 0,
+    /**
+     * Light throttling where UX is not impacted.
+     */
+    LIGHT,
+    /**
+     * Moderate throttling where UX is not largely impacted.
+     */
+    MODERATE,
+    /**
+     * Severe throttling where UX is largely impacted.
+     * Similar to 1.0 throttlingThreshold.
+     */
+    SEVERE,
+    /**
+     * Platform has done everything to reduce power.
+     */
+    CRITICAL,
+    /**
+     * Key components in platform are shutting down due to thermal condition.
+     * Device functionalities will be limited.
+     */
+    EMERGENCY,
+    /**
+     * Need shutdown immediately.
+     */
+    SHUTDOWN,
+}
diff --git a/thermal/aidl/default/Android.bp b/thermal/aidl/default/Android.bp
new file mode 100644
index 0000000..49a578b
--- /dev/null
+++ b/thermal/aidl/default/Android.bp
@@ -0,0 +1,49 @@
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_binary {
+    name: "android.hardware.thermal-service.example",
+    relative_install_path: "hw",
+    init_rc: [":android.hardware.thermal.example.rc"],
+    vintf_fragments: [":android.hardware.thermal.example.xml"],
+    vendor: true,
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+        "android.hardware.thermal-V1-ndk",
+    ],
+    srcs: [
+        "main.cpp",
+        "Thermal.cpp",
+    ],
+}
+
+filegroup {
+    name: "android.hardware.thermal.example.xml",
+    srcs: ["thermal-example.xml"],
+}
+
+filegroup {
+    name: "android.hardware.thermal.example.rc",
+    srcs: ["thermal-example.rc"],
+}
diff --git a/thermal/aidl/default/Thermal.cpp b/thermal/aidl/default/Thermal.cpp
new file mode 100644
index 0000000..5771e0e
--- /dev/null
+++ b/thermal/aidl/default/Thermal.cpp
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Thermal.h"
+
+#include <android-base/logging.h>
+
+namespace aidl::android::hardware::thermal::impl::example {
+
+using ndk::ScopedAStatus;
+
+ScopedAStatus Thermal::getCoolingDevices(std::vector<CoolingDevice>* /* out_devices */) {
+    LOG(VERBOSE) << __func__;
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::getCoolingDevicesWithType(CoolingType in_type,
+                                                 std::vector<CoolingDevice>* /* out_devices */) {
+    LOG(VERBOSE) << __func__ << " CoolingType: " << static_cast<int32_t>(in_type);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::getTemperatures(std::vector<Temperature>* /* out_temperatures */) {
+    LOG(VERBOSE) << __func__;
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::getTemperaturesWithType(TemperatureType in_type,
+                                               std::vector<Temperature>* /* out_temperatures */) {
+    LOG(VERBOSE) << __func__ << " TemperatureType: " << static_cast<int32_t>(in_type);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::getTemperatureThresholds(
+        std::vector<TemperatureThreshold>* /* out_temperatureThresholds */) {
+    LOG(VERBOSE) << __func__;
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::getTemperatureThresholdsWithType(
+        TemperatureType in_type,
+        std::vector<TemperatureThreshold>* /* out_temperatureThresholds */) {
+    LOG(VERBOSE) << __func__ << " TemperatureType: " << static_cast<int32_t>(in_type);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::registerThermalChangedCallback(
+        const std::shared_ptr<IThermalChangedCallback>& in_callback) {
+    LOG(VERBOSE) << __func__ << " IThermalChangedCallback: " << in_callback;
+    if (in_callback == nullptr) {
+        return ScopedAStatus::fromStatus(STATUS_BAD_VALUE);
+    }
+    if (mCallbacks.find(in_callback) != mCallbacks.end()) {
+        return ScopedAStatus::fromStatus(STATUS_INVALID_OPERATION);
+    }
+    mCallbacks.insert(in_callback);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::registerThermalChangedCallbackWithType(
+        const std::shared_ptr<IThermalChangedCallback>& in_callback, TemperatureType in_type) {
+    LOG(VERBOSE) << __func__ << " IThermalChangedCallback: " << in_callback
+                 << ", TemperatureType: " << static_cast<int32_t>(in_type);
+    if (in_callback == nullptr) {
+        return ScopedAStatus::fromStatus(STATUS_BAD_VALUE);
+    }
+    if (mCallbacks.find(in_callback) != mCallbacks.end()) {
+        return ScopedAStatus::fromStatus(STATUS_INVALID_OPERATION);
+    }
+    mCallbacks.insert(in_callback);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus Thermal::unregisterThermalChangedCallback(
+        const std::shared_ptr<IThermalChangedCallback>& in_callback) {
+    LOG(VERBOSE) << __func__ << " IThermalChangedCallback: " << in_callback;
+    bool found = false;
+    if (in_callback == nullptr) {
+        return ScopedAStatus::fromStatus(STATUS_BAD_VALUE);
+    }
+    if (mCallbacks.find(in_callback) == mCallbacks.end()) {
+        return ScopedAStatus::fromStatus(STATUS_INVALID_OPERATION);
+    }
+    mCallbacks.erase(in_callback);
+    return ScopedAStatus::ok();
+}
+
+}  // namespace aidl::android::hardware::thermal::impl::example
diff --git a/thermal/aidl/default/Thermal.h b/thermal/aidl/default/Thermal.h
new file mode 100644
index 0000000..788af4a
--- /dev/null
+++ b/thermal/aidl/default/Thermal.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <set>
+
+#include <aidl/android/hardware/thermal/BnThermal.h>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace thermal {
+namespace impl {
+namespace example {
+
+class Thermal : public BnThermal {
+  public:
+    ndk::ScopedAStatus getCoolingDevices(std::vector<CoolingDevice>* out_devices) override;
+    ndk::ScopedAStatus getCoolingDevicesWithType(CoolingType in_type,
+                                                 std::vector<CoolingDevice>* out_devices) override;
+
+    ndk::ScopedAStatus getTemperatures(std::vector<Temperature>* out_temperatures) override;
+    ndk::ScopedAStatus getTemperaturesWithType(TemperatureType in_type,
+                                               std::vector<Temperature>* out_temperatures) override;
+
+    ndk::ScopedAStatus getTemperatureThresholds(
+            std::vector<TemperatureThreshold>* out_temperatureThresholds) override;
+
+    ndk::ScopedAStatus getTemperatureThresholdsWithType(
+            TemperatureType in_type,
+            std::vector<TemperatureThreshold>* out_temperatureThresholds) override;
+
+    ndk::ScopedAStatus registerThermalChangedCallback(
+            const std::shared_ptr<IThermalChangedCallback>& in_callback) override;
+    ndk::ScopedAStatus registerThermalChangedCallbackWithType(
+            const std::shared_ptr<IThermalChangedCallback>& in_callback,
+            TemperatureType in_type) override;
+
+    ndk::ScopedAStatus unregisterThermalChangedCallback(
+            const std::shared_ptr<IThermalChangedCallback>& in_callback) override;
+
+  private:
+    std::set<std::shared_ptr<IThermalChangedCallback>> mCallbacks;
+};
+
+}  // namespace example
+}  // namespace impl
+}  // namespace thermal
+}  // namespace hardware
+}  // namespace android
+}  // namespace aidl
diff --git a/thermal/aidl/default/main.cpp b/thermal/aidl/default/main.cpp
new file mode 100644
index 0000000..61d8ad0
--- /dev/null
+++ b/thermal/aidl/default/main.cpp
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Thermal.h"
+
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+using aidl::android::hardware::thermal::impl::example::Thermal;
+
+int main() {
+    ABinderProcess_setThreadPoolMaxThreadCount(0);
+    std::shared_ptr<Thermal> thermal = ndk::SharedRefBase::make<Thermal>();
+
+    const std::string instance = std::string() + Thermal::descriptor + "/default";
+    binder_status_t status =
+            AServiceManager_addService(thermal->asBinder().get(), instance.c_str());
+    CHECK(status == STATUS_OK);
+
+    ABinderProcess_joinThreadPool();
+    return EXIT_FAILURE;  // should not reach
+}
diff --git a/thermal/aidl/default/thermal-example.rc b/thermal/aidl/default/thermal-example.rc
new file mode 100644
index 0000000..591ca03
--- /dev/null
+++ b/thermal/aidl/default/thermal-example.rc
@@ -0,0 +1,4 @@
+service vendor.thermal-example /vendor/bin/hw/android.hardware.thermal-service.example
+    class hal
+    user nobody
+    group system
diff --git a/thermal/aidl/default/thermal-example.xml b/thermal/aidl/default/thermal-example.xml
new file mode 100644
index 0000000..bdee744
--- /dev/null
+++ b/thermal/aidl/default/thermal-example.xml
@@ -0,0 +1,7 @@
+<manifest version="1.0" type="device">
+    <hal format="aidl">
+        <name>android.hardware.thermal</name>
+        <version>1</version>
+        <fqname>IThermal/default</fqname>
+    </hal>
+</manifest>
diff --git a/thermal/aidl/vts/Android.bp b/thermal/aidl/vts/Android.bp
new file mode 100644
index 0000000..b00eb33
--- /dev/null
+++ b/thermal/aidl/vts/Android.bp
@@ -0,0 +1,40 @@
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_test {
+    name: "VtsHalThermalTargetTest",
+    defaults: [
+        "VtsHalTargetTestDefaults",
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: ["VtsHalThermalTargetTest.cpp"],
+    shared_libs: [
+        "libbinder_ndk",
+    ],
+    static_libs: [
+        "android.hardware.thermal-V1-ndk",
+    ],
+    test_suites: [
+        "vts",
+    ],
+}
diff --git a/thermal/aidl/vts/VtsHalThermalTargetTest.cpp b/thermal/aidl/vts/VtsHalThermalTargetTest.cpp
new file mode 100644
index 0000000..b93250e
--- /dev/null
+++ b/thermal/aidl/vts/VtsHalThermalTargetTest.cpp
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <algorithm>
+#include <chrono>
+#include <cmath>
+#include <memory>
+#include <string>
+#include <thread>
+#include <vector>
+
+#define LOG_TAG "thermal_aidl_hal_test"
+
+#include <aidl/Gtest.h>
+#include <aidl/Vintf.h>
+#include <aidl/android/hardware/thermal/BnThermal.h>
+#include <aidl/android/hardware/thermal/BnThermalChangedCallback.h>
+#include <android-base/logging.h>
+#include <android-base/properties.h>
+#include <android/binder_ibinder.h>
+#include <android/binder_interface_utils.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+#include <android/binder_status.h>
+#include <gtest/gtest.h>
+
+#include <unistd.h>
+
+namespace aidl::android::hardware::thermal {
+
+namespace {
+
+using ::android::sp;
+using android::hardware::thermal::CoolingDevice;
+using android::hardware::thermal::IThermal;
+using android::hardware::thermal::Temperature;
+using android::hardware::thermal::TemperatureType;
+
+using namespace std::string_literals;
+using namespace std::chrono_literals;
+
+static const Temperature kThrottleTemp = {
+        .type = TemperatureType::SKIN,
+        .name = "test temperature sensor",
+        .value = 98.6,
+        .throttlingStatus = ThrottlingSeverity::CRITICAL,
+};
+
+// Callback class for receiving thermal event notifications from main class
+class ThermalCallback : public BnThermalChangedCallback {
+  public:
+    ndk::ScopedAStatus notifyThrottling(const Temperature&) override {
+        {
+            std::lock_guard<std::mutex> lock(mMutex);
+            mInvoke = true;
+        }
+        mNotifyThrottling.notify_all();
+        return ndk::ScopedAStatus::ok();
+    }
+
+    template <typename R, typename P>
+    [[nodiscard]] bool waitForCallback(std::chrono::duration<R, P> duration) {
+        std::unique_lock<std::mutex> lock(mMutex);
+        bool r = mNotifyThrottling.wait_for(lock, duration, [this] { return this->mInvoke; });
+        mInvoke = false;
+        return r;
+    }
+
+  private:
+    std::mutex mMutex;
+    std::condition_variable mNotifyThrottling;
+    bool mInvoke = false;
+};
+
+// The main test class for THERMAL HIDL HAL.
+class ThermalAidlTest : public testing::TestWithParam<std::string> {
+  public:
+    void SetUp() override {
+        AIBinder* binder = AServiceManager_waitForService(GetParam().c_str());
+        ASSERT_NE(binder, nullptr);
+        mThermal = IThermal::fromBinder(ndk::SpAIBinder(binder));
+
+        mThermalCallback = ndk::SharedRefBase::make<ThermalCallback>();
+        ASSERT_NE(mThermalCallback, nullptr);
+        auto ret = mThermal->registerThermalChangedCallback(mThermalCallback);
+        ASSERT_TRUE(ret.isOk());
+        // Expect to fail if register again
+        ret = mThermal->registerThermalChangedCallback(mThermalCallback);
+        ASSERT_FALSE(ret.isOk());
+        ASSERT_TRUE(ret.getStatus() == STATUS_INVALID_OPERATION);
+    }
+
+    void TearDown() override {
+        auto ret = mThermal->unregisterThermalChangedCallback(mThermalCallback);
+        ASSERT_TRUE(ret.isOk());
+        // Expect to fail if unregister again
+        ret = mThermal->unregisterThermalChangedCallback(mThermalCallback);
+        ASSERT_FALSE(ret.isOk());
+        ASSERT_TRUE(ret.getStatus() == STATUS_INVALID_OPERATION);
+    }
+
+  protected:
+    std::shared_ptr<IThermal> mThermal;
+    std::shared_ptr<ThermalCallback> mThermalCallback;
+};
+
+// Test ThermalChangedCallback::notifyThrottling().
+// This just calls into and back from our local ThermalChangedCallback impl.
+TEST_P(ThermalAidlTest, NotifyThrottlingTest) {
+    std::shared_ptr<ThermalCallback> thermalCallback = ndk::SharedRefBase::make<ThermalCallback>();
+    auto ret = thermalCallback->notifyThrottling(kThrottleTemp);
+    ASSERT_TRUE(ret.isOk());
+    ASSERT_TRUE(thermalCallback->waitForCallback(200ms));
+}
+
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(ThermalAidlTest);
+INSTANTIATE_TEST_SUITE_P(
+        Thermal, ThermalAidlTest,
+        testing::ValuesIn(::android::getAidlHalInstanceNames(IThermal::descriptor)),
+        ::android::PrintInstanceNameToString);
+
+}  // namespace
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    ABinderProcess_setThreadPoolMaxThreadCount(1);
+    ABinderProcess_startThreadPool();
+    return RUN_ALL_TESTS();
+}
+
+}  // namespace aidl::android::hardware::thermal