diff --git a/biometrics/common/aidl/android/hardware/biometrics/common/CommonProps.aidl b/biometrics/common/aidl/android/hardware/biometrics/common/CommonProps.aidl
index 8304c95..9c3fd58 100644
--- a/biometrics/common/aidl/android/hardware/biometrics/common/CommonProps.aidl
+++ b/biometrics/common/aidl/android/hardware/biometrics/common/CommonProps.aidl
@@ -22,29 +22,26 @@
 @VintfStability
 parcelable CommonProps {
     /**
-     * A statically configured unique ID that identifies a single biometric
-     * sensor. IDs must start at zero and increment by one for each unique
-     * sensor. Note that ID allocations are shared between all biometric
-     * modalities (e.g. fingerprint, face, iris), and a single ID must never
+     * A statically configured unique ID that identifies a single biometric sensor. IDs must start
+     * at zero and increment by one for each unique sensor. Note that ID allocations are shared
+     * between all biometric modalities (e.g. fingerprint, face, iris), and a single ID must never
      * be claimed by more than a single sensor.
      */
     int sensorId;
 
     /**
-     * A statically configured strength for this sensor. See the SensorStrength
-     * interface for more information.
+     * A statically configured strength for this sensor. See the SensorStrength interface for more
+     * information.
      */
     SensorStrength sensorStrength;
 
     /**
-     * The maximum number of enrollments that a single user can have.
-     * Statically configured.
+     * The maximum number of enrollments that a single user can have. Statically configured.
      */
     int maxEnrollmentsPerUser;
 
     /**
-     * A list of hardware information for subsystems that pertain to this
-     * biometric sensor.
+     * A list of hardware information for subsystems that pertain to this biometric sensor.
      */
     HardwareInfo[] hardwareInfo;
 }
\ No newline at end of file
diff --git a/biometrics/common/aidl/android/hardware/biometrics/common/SensorStrength.aidl b/biometrics/common/aidl/android/hardware/biometrics/common/SensorStrength.aidl
index 7460279..790691c 100644
--- a/biometrics/common/aidl/android/hardware/biometrics/common/SensorStrength.aidl
+++ b/biometrics/common/aidl/android/hardware/biometrics/common/SensorStrength.aidl
@@ -20,22 +20,21 @@
 @Backing(type="byte")
 enum SensorStrength {
     /**
-     * A sensor that meets the requirements for Class 1 biometrics as defined
-     * in the CDD. This does not correspond to a public BiometricManager.Authenticators
-     * constant. Sensors of this strength are not available to applications  ia the
-     * public API surface.
+     * A sensor that meets the requirements for Class 1 biometrics as defined in the CDD. This does
+     * not correspond to a public BiometricManager.Authenticators constant. Sensors of this strength
+     * are not available to applications via the public API surface.
      */
     CONVENIENCE,
 
     /**
-     * A sensor that meets the requirements for Class 2 biometrics as defined
-     * in the CDD. Corresponds to BiometricManager.Authenticators.BIOMETRIC_WEAK.
+     * A sensor that meets the requirements for Class 2 biometrics as defined in the CDD.
+     * Corresponds to BiometricManager.Authenticators.BIOMETRIC_WEAK.
      */
     WEAK,
 
     /**
-     * A sensor that meets the requirements for Class 3 biometrics as defined
-     * in the CDD. Corresponds to BiometricManager.Authenticators.BIOMETRIC_STRONG.
+     * A sensor that meets the requirements for Class 3 biometrics as defined in the CDD.
+     * Corresponds to BiometricManager.Authenticators.BIOMETRIC_STRONG.
      *
      * Notably, this is the only strength that allows generation/verification of
      * HardwareAuthToken(s).
diff --git a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/Error.aidl b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/Error.aidl
index 014a4c0..4fe7f5f 100644
--- a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/Error.aidl
+++ b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/Error.aidl
@@ -34,28 +34,28 @@
      * The implementation is unable to process the request. For example, invalid arguments were
      * supplied.
      */
-    UNABLE_TO_PROCESS,
+    UNABLE_TO_PROCESS = 2,
 
     /**
      * The current operation took too long to complete.
      */
-    TIMEOUT,
+    TIMEOUT = 3,
 
     /**
      * No space available to store additional enrollments.
      */
-    NO_SPACE,
+    NO_SPACE = 4,
 
     /**
      * The operation was canceled. See common::ICancellationSignal.
      */
-    CANCELED,
+    CANCELED = 5,
 
     /**
      * The implementation was unable to remove an enrollment.
      * See ISession#removeEnrollments.
      */
-    UNABLE_TO_REMOVE,
+    UNABLE_TO_REMOVE = 6,
 
     /**
      * Reserved to maintain backwards compatibility. See ISessionCallback#onLockoutTimed instead.
diff --git a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/IFingerprint.aidl b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/IFingerprint.aidl
index 0c8ebc5..4b907b4 100644
--- a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/IFingerprint.aidl
+++ b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/IFingerprint.aidl
@@ -27,41 +27,34 @@
     /**
      * getSensorProps:
      *
-     * @return A list of properties for all sensors that an instance of the
-     * HAL supports.
+     * @return A list of properties for all sensors that an instance of the HAL supports.
      */
     SensorProps[] getSensorProps();
 
     /**
      * createSession:
      *
-     * Creates a session which can then be used by the framework to perform
-     * operations such as enroll, authenticate, etc for the given sensorId
-     * and userId.
+     * Creates a session which can then be used by the framework to perform operations such as
+     * enroll, authenticate, etc for the given sensorId and userId.
      *
-     * A physical sensor identified by sensorId typically supports only a
-     * single in-flight session at a time. As such, if a session is currently
-     * in a state other than SessionState::IDLING, the HAL MUST finish or
-     * cancel the current operation and return to SessionState::IDLING before
-     * the new session is created. For example:
-     *   1) If a session for sensorId=0, userId=0
-     *      is currently in a cancellable state (see ICancellationSignal) such
-     *      as SessionState::AUTHENTICATING and the framework requests a new
-     *      session for sensorId=0, userId=10, the HAL must end the current
-     *      session with Error::CANCELED, invoke
-     *      ISessionCallback#onStateChanged with SessionState::IDLING, and
+     * A physical sensor identified by sensorId typically supports only a single in-flight session
+     * at a time. As such, if a session is currently in a state other than SessionState::IDLING, the
+     * HAL MUST finish or cancel the current operation and return to SessionState::IDLING before the
+     * new session is created. For example:
+     *   1) If a session for sensorId=0, userId=0 is currently in a cancellable state (see
+     *      ICancellationSignal) such as SessionState::AUTHENTICATING and the framework requests a
+     *      new session for sensorId=0, userId=10, the HAL must end the current session with
+     *      Error::CANCELED, invoke ISessionCallback#onStateChanged with SessionState::IDLING, and
      *      then return a new session for sensorId=0, userId=10.
-     *   2) If a session for sensorId=0, userId=0 is currently in a
-     *      non-cancellable state such as SessionState::REMOVING_ENROLLMENTS,
-     *      and the framework requests a new session for sensorId=0, userId=10,
-     *      the HAL must finish the current operation before invoking
-     *      ISessionCallback#onStateChanged with SessionState::IDLING, and
-     *      return a new session for sensorId=0, userId=10.
+     *   2) If a session for sensorId=0, userId=0 is currently in a non-cancellable state such as
+     *      SessionState::REMOVING_ENROLLMENTS, and the framework requests a new session for
+     *      sensorId=0, userId=10, the HAL must finish the current operation before invoking
+     *      ISessionCallback#onStateChanged with SessionState::IDLING, and return a new session for
+     *      sensorId=0, userId=10.
      *
-     * Implementations must store user-specific state or metadata in
-     * /data/vendor_de/<user>/fpdata as specified by the SeLinux policy. This
-     * directory is created/removed by vold (see vold_prepare_subdirs.cpp).
-     * Implementations may store additional user-specific data, such as
+     * Implementations must store user-specific state or metadata in /data/vendor_de/<user>/fpdata
+     * as specified by the SeLinux policy. This directory is created/removed by vold (see
+     * vold_prepare_subdirs.cpp). Implementations may store additional user-specific data, such as
      * embeddings or templates in StrongBox.
      *
      * @param sensorId The sensor with which this session is being created.
@@ -74,33 +67,29 @@
     /**
      * generateChallenge:
      *
-     * Begins a secure transaction request. Note that the challenge by itself
-     * is not useful. It only becomes useful when wrapped in a verifiable
-     * message such as a HardwareAuthToken.
+     * Begins a secure transaction request. Note that the challenge by itself is not useful. It only
+     * becomes useful when wrapped in a verifiable message such as a HardwareAuthToken.
      *
      * Canonical example:
      *   1) User requests an operation, such as fingerprint enrollment.
-     *   2) Fingerprint enrollment cannot happen until the user confirms
-     *      their lockscreen credential (PIN/Pattern/Password).
-     *   3) However, the biometric subsystem does not want just "any"
-     *      proof of credential confirmation. It needs proof that the
-     *      user explicitly authenticated credential in order to allow
-     *      addition of biometric enrollments.
+     *   2) Fingerprint enrollment cannot happen until the user confirms their lockscreen credential
+     *      (PIN/Pattern/Password).
+     *   3) However, the biometric subsystem does not want just "any" proof of credential
+     *      confirmation. It needs proof that the user explicitly authenticated credential in order
+     *      to allow addition of biometric enrollments.
      * To secure this path, the following path is taken:
      *   1) Upon user requesting fingerprint enroll, the framework requests
      *      IFingerprint#generateChallenge
-     *   2) Framework sends the challenge to the credential subsystem, and upon
-     *      credential confirmation, a HAT is created, containing the challenge
-     *      in the "challenge" field.
+     *   2) Framework sends the challenge to the credential subsystem, and upon credential
+     *      confirmation, a HAT is created, containing the challenge in the "challenge" field.
      *   3) Framework sends the HAT to the HAL, e.g. ISession#enroll.
      *   4) Implementation verifies the authenticity and integrity of the HAT.
-     *   5) Implementation now has confidence that the user entered their
-     *      credential to allow biometric enrollment.
+     *   5) Implementation now has confidence that the user entered their credential to allow
+     *      biometric enrollment.
      *
-     * Note that the interface allows multiple in-flight challenges. For
-     * example, invoking generateChallenge(0, 0, timeoutSec, cb) twice
-     * does not invalidate the first challenge. The challenge is invalidated
-     * only when:
+     * Note that the interface allows multiple in-flight challenges. For example, invoking
+     * generateChallenge(0, 0, timeoutSec, cb) twice does not invalidate the first challenge. The
+     * challenge is invalidated only when:
      *   1) The provided timeout expires, or
      *   2) IFingerprint#revokeChallenge is invoked
      *
@@ -124,9 +113,9 @@
     /**
      * revokeChallenge:
      *
-     * Revokes a challenge that was previously generated. Note that if an
-     * invalid combination of parameters is requested, the implementation
-     * must still notify the framework using the provided callback.
+     * Revokes a challenge that was previously generated. Note that if an invalid combination of
+     * parameters is requested, the implementation must still notify the framework using the
+     * provided callback.
      *
      * @param sensorId Sensor that the revocation should apply to.
      * @param userId User that the revocation should apply to.
diff --git a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISession.aidl b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISession.aidl
index d0f546a..644e214 100644
--- a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISession.aidl
+++ b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISession.aidl
@@ -51,41 +51,35 @@
      *
      * A request to add a fingerprint enrollment.
      *
-     * Once the HAL is able to start processing the enrollment request, it must
-     * notify the framework via ISessionCallback#onStateChanged with
-     * SessionState::ENROLLING.
+     * Once the HAL is able to start processing the enrollment request, it must notify the framework
+     * via ISessionCallback#onStateChanged with SessionState::ENROLLING.
      *
-     * At any point during enrollment, if a non-recoverable error occurs,
-     * the HAL must notify the framework via ISessionCallback#onError with
-     * the applicable enrollment-specific error, and then send
-     * ISessionCallback#onStateChanged(cookie, SessionState::IDLING) if no
-     * subsequent operation is in the queue.
+     * At any point during enrollment, if a non-recoverable error occurs, the HAL must notify the
+     * framework via ISessionCallback#onError with the applicable enrollment-specific error, and
+     * then send ISessionCallback#onStateChanged(cookie, SessionState::IDLING) if no subsequent
+     * operation is in the queue.
      *
-     * Before capturing fingerprint data, the implementation must first
-     * verify the authenticity and integrity of the provided HardwareAuthToken.
-     * In addition, it must check that the challenge within the provided
-     * HardwareAuthToken is valid. See IFingerprint#generateChallenge.
-     * If any of the above checks fail, the framework must be notified
-     * via ISessionCallback#onError and the HAL must notify the framework when
-     * it returns to the idle state. See Error::UNABLE_TO_PROCESS.
+     * Before capturing fingerprint data, the implementation must first verify the authenticity and
+     * integrity of the provided HardwareAuthToken. In addition, it must check that the challenge
+     * within the provided HardwareAuthToken is valid. See IFingerprint#generateChallenge. If any of
+     * the above checks fail, the framework must be notified via ISessionCallback#onError and the
+     * HAL must notify the framework when it returns to the idle state. See
+     * Error::UNABLE_TO_PROCESS.
      *
-     * During enrollment, the implementation may notify the framework
-     * via ISessionCallback#onAcquired with messages that may be used to guide
-     * the user. This callback can be invoked multiple times if necessary.
-     * Similarly, the framework may be notified of enrollment progress changes
-     * via ISessionCallback#onEnrollmentProgress. Once the framework is notified
-     * that there are 0 "remaining" steps, the framework may cache the
-     * "enrollmentId". See ISessionCallback#onEnrollmentProgress for more info.
-     * The HAL must notify the framework once it returns to the idle state.
+     * During enrollment, the implementation may notify the framework via
+     * ISessionCallback#onAcquired with messages that may be used to guide the user. This callback
+     * can be invoked multiple times if necessary. Similarly, the framework may be notified of
+     * enrollment progress changes via ISessionCallback#onEnrollmentProgress. Once the framework is
+     * notified that there are 0 "remaining" steps, the framework may cache the "enrollmentId". See
+     * ISessionCallback#onEnrollmentProgress for more info. The HAL must notify the framework once
+     * it returns to the idle state.
      *
-     * When a finger is successfully added and before the framework is notified
-     * of remaining=0, the implementation MUST update and associate this
-     * (sensorId, userId) pair with a new new entropy-encoded random identifier.
-     * See ISession#getAuthenticatorId for more information.
+     * When a finger is successfully added and before the framework is notified of remaining=0, the
+     * implementation MUST update and associate this (sensorId, userId) pair with a new new
+     * entropy-encoded random identifier. See ISession#getAuthenticatorId for more information.
      *
-     * @param cookie An identifier used to track subsystem operations related
-     *               to this call path. The client must guarantee that it is
-     *               unique per ISession.
+     * @param cookie An identifier used to track subsystem operations related to this call path. The
+     *               client must guarantee that it is unique per ISession.
      * @param hat See above documentation.
      */
     ICancellationSignal enroll(in int cookie, in HardwareAuthToken hat);
@@ -212,79 +206,66 @@
     /**
      * getAuthenticatorId:
      *
-     * MUST return 0 via ISessionCallback#onAuthenticatorIdRetrieved for
-     * sensors that are configured as SensorStrength::WEAK or
-     * SensorStrength::CONVENIENCE.
+     * MUST return 0 via ISessionCallback#onAuthenticatorIdRetrieved for sensors that are configured
+     * as SensorStrength::WEAK or SensorStrength::CONVENIENCE.
      *
-     * The following only applies to sensors that are configured as
-     * SensorStrength::STRONG.
+     * The following only applies to sensors that are configured as SensorStrength::STRONG.
      *
-     * The authenticatorId is a (sensorId, user)-specific identifier which
-     * can be used during key generation and key import to to associate a
-     * key (in KeyStore / KeyMaster) with the current set of enrolled
-     * fingerprints. For example, the following public Android APIs
-     * allow for keys to be invalidated when the user adds a new enrollment
-     * after the key was created:
+     * The authenticatorId is a (sensorId, user)-specific identifier which can be used during key
+     * generation and key import to to associate a key (in KeyStore / KeyMaster) with the current
+     * set of enrolled fingerprints. For example, the following public Android APIs allow for keys
+     * to be invalidated when the user adds a new enrollment after the key was created:
      * KeyGenParameterSpec.Builder.setInvalidatedByBiometricEnrollment and
      * KeyProtection.Builder.setInvalidatedByBiometricEnrollment.
      *
-     * In addition, upon successful fingerprint authentication, the signed HAT
-     * that is returned to the framework via ISessionCallback#onAuthenticated
-     * must contain this identifier in the authenticatorId field.
+     * In addition, upon successful fingerprint authentication, the signed HAT that is returned to
+     * the framework via ISessionCallback#onAuthenticated must contain this identifier in the
+     * authenticatorId field.
      *
-     * Returns an entropy-encoded random identifier associated with the current
-     * set of enrollments via ISessionCallback#onAuthenticatorIdRetrieved. The
-     * authenticatorId
+     * Returns an entropy-encoded random identifier associated with the current set of enrollments
+     * via ISessionCallback#onAuthenticatorIdRetrieved. The authenticatorId
      *   1) MUST change whenever a new fingerprint is enrolled
      *   2) MUST return 0 if no fingerprints are enrolled
      *   3) MUST not change if a fingerprint is deleted.
      *   4) MUST be an entropy-encoded random number
      *
-     * @param cookie An identifier used to track subsystem operations related
-     *               to this call path. The client must guarantee that it is
-     *               unique per ISession.
+     * @param cookie An identifier used to track subsystem operations related to this call path. The
+     *               client must guarantee that it is unique per ISession.
      */
     void getAuthenticatorId(in int cookie);
 
     /**
      * invalidateAuthenticatorId:
      *
-     * This method only applies to sensors that are configured as
-     * SensorStrength::STRONG. If invoked erroneously by the framework for
-     * sensor of other strengths, the HAL should immediately invoke
+     * This method only applies to sensors that are configured as SensorStrength::STRONG. If invoked
+     * by the framework for sensor of other strengths, the HAL should immediately invoke
      * ISessionCallback#onAuthenticatorIdInvalidated.
      *
-     * The following only applies to sensors that are configured as
-     * SensorStrength::STRONG.
+     * The following only applies to sensors that are configured as SensorStrength::STRONG.
      *
-     * When invoked by the framework, the implementation must perform the
-     * following sequence of events:
-     *   1) Verify the authenticity and integrity of the provided HAT. If this
-     *      check fails, the HAL must invoke ISessionCallback#onError with
-     *      Error::UNABLE_TO_PROCESS and return to
+     * When invoked by the framework, the implementation must perform the following sequence of
+     * events:
+     *   1) Verify the authenticity and integrity of the provided HAT. If this check fails, the HAL
+     *      must invoke ISessionCallback#onError with Error::UNABLE_TO_PROCESS and return to
      *      SessionState::IDLING if no subsequent work is in the queue.
-     *   2) Verify that the timestamp provided within the HAT is relatively
-     *      recent (e.g. on the order of minutes, not hours). If this check fails,
-     *      the HAL must invoke ISessionCallback#onError with
-     *      Error::UNABLE_TO_PROCESS and return to SessionState::IDLING
-     *      if no subsequent work is in the queue.
+     *   2) Verify that the timestamp provided within the HAT is relatively recent (e.g. on the
+     *      order of minutes, not hours). If this check fails, the HAL must invoke
+     *      ISessionCallback#onError with Error::UNABLE_TO_PROCESS and return to
+     *      SessionState::IDLING if no subsequent work is in the queue.
      *   3) Update the authenticatorId with a new entropy-encoded random number
      *   4) Persist the new authenticatorId to non-ephemeral storage
      *   5) Notify the framework that the above is completed, via
      *      ISessionCallback#onAuthenticatorInvalidated
      *
-     * A practical use case of invalidation would be when the user adds a new
-     * enrollment to a sensor managed by a different HAL instance. The
-     * public android.security.keystore APIs bind keys to "all biometrics"
-     * rather than "fingerprint-only" or "face-only" (see #getAuthenticatorId
-     * for more details). As such, the framework would coordinate invalidation
-     * across multiple biometric HALs as necessary.
+     * A practical use case of invalidation would be when the user adds a new enrollment to a sensor
+     * managed by a different HAL instance. The public android.security.keystore APIs bind keys to
+     * "all biometrics" rather than "fingerprint-only" or "face-only" (see #getAuthenticatorId
+     * for more details). As such, the framework would coordinate invalidation across multiple
+     * biometric HALs as necessary.
      *
-     * @param cookie An identifier used to track subsystem operations related
-     *               to this call path. The client must guarantee that it is
-     *               unique per ISession.
-     * @param hat HardwareAuthToken that must be validated before proceeding
-     *            with this operation.
+     * @param cookie An identifier used to track subsystem operations related to this call path. The
+     *               client must guarantee that it is unique per ISession.
+     * @param hat HardwareAuthToken that must be validated before proceeding with this operation.
      */
     void invalidateAuthenticatorId(in int cookie, in HardwareAuthToken hat);
 
@@ -329,9 +310,8 @@
      * See the Android CDD section 7.3.10 for the full set of lockout and rate-limiting
      * requirements.
      *
-     * @param cookie An identifier used to track subsystem operations related
-     *               to this call path. The client must guarantee that it is
-     *               unique per ISession.
+     * @param cookie An identifier used to track subsystem operations related to this call path. The
+     *               client must guarantee that it is unique per ISession.
      * @param hat HardwareAuthToken See above documentation.
      */
     void resetLockout(in int cookie, in HardwareAuthToken hat);
@@ -352,12 +332,12 @@
      * following states: SessionState::ENROLLING, SessionState::AUTHENTICATING, or
      * SessionState::DETECTING_INTERACTION.
      *
-     * Note that the framework will only invoke this method if the event occurred on the display
-     * on which this sensor is located.
+     * Note that the framework will only invoke this method if the event occurred on the display on
+     * which this sensor is located.
      *
      * Note that for sensors which require illumination such as
-     * FingerprintSensorType::UNDER_DISPLAY_OPTICAL, and where illumination is handled below
-     * the framework, this is a good time to start illuminating.
+     * FingerprintSensorType::UNDER_DISPLAY_OPTICAL, and where illumination is handled below the
+     * framework, this is a good time to start illuminating.
      *
      * @param pointerId See android.view.MotionEvent#getPointerId
      * @param x The distance in pixels from the left edge of the display.
diff --git a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISessionCallback.aidl b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISessionCallback.aidl
index 33a93e5..74792d8 100644
--- a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISessionCallback.aidl
+++ b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/ISessionCallback.aidl
@@ -38,7 +38,10 @@
      * operation.
      *
      * @param info See the AcquiredInfo enum.
-     * @param vendorCode Only valid if info == AcquiredInfo::VENDOR.
+     * @param vendorCode Only valid if info == AcquiredInfo::VENDOR. The vendorCode must be used to
+     *                   index into the configuration
+     *                   com.android.internal.R.array.fingerprint_acquired_vendor that's installed
+     *                   on the vendor partition.
      */
     void onAcquired(in AcquiredInfo info, in int vendorCode);
 
@@ -58,7 +61,10 @@
      * an Error::CANCELED message.
      *
      * @param error See the Error enum.
-     * @param vendorCode Only valid if error == Error::VENDOR.
+     * @param vendorCode Only valid if error == Error::VENDOR. The vendorCode must be used to index
+     *                   into the configuration
+     *                   com.android.internal.R.fingerprint_error_vendor that's installed on the
+     *                   vendor partition.
      */
     void onError(in Error error, in int vendorCode);
 
diff --git a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/SensorProps.aidl b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/SensorProps.aidl
index fc3b44d..ab70a58 100644
--- a/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/SensorProps.aidl
+++ b/biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/SensorProps.aidl
@@ -27,8 +27,7 @@
     CommonProps commonProps;
 
     /**
-     * A statically configured sensor type representing this fingerprint
-     * sensor.
+     * A statically configured sensor type representing this fingerprint sensor.
      */
     FingerprintSensorType sensorType;
 
@@ -39,32 +38,29 @@
     boolean supportsNavigationGestures;
 
     /**
-     * The location of the center of the sensor if applicable. For example,
-     * sensors of FingerprintSensorType::UNDER_DISPLAY_* would report this
-     * value as the distance in pixels, measured from the left edge of the
-     * screen.
+     * The location of the center of the sensor if applicable. For example, sensors of
+     * FingerprintSensorType::UNDER_DISPLAY_* would report this value as the distance in pixels,
+     * measured from the left edge of the screen.
      */
     int sensorLocationX;
 
     /**
-     * The location of the center of the sensor if applicable. For example,
-     * sensors of FingerprintSensorType::UNDER_DISPLAY_* would report this
-     * value as the distance in pixels, measured from the top edge of the
-     * screen.
+     * The location of the center of the sensor if applicable. For example, sensors of
+     * FingerprintSensorType::UNDER_DISPLAY_* would report this value as the distance in pixels,
+     * measured from the top edge of the screen.
      */
     int sensorLocationY;
 
     /**
      * The radius of the sensor if applicable. For example, sensors of
-     * FingerprintSensorType::UNDER_DISPLAY_* would report this value as
-     * the radius of the sensor, in pixels.
+     * FingerprintSensorType::UNDER_DISPLAY_* would report this value as the radius of the sensor,
+     * in pixels.
      */
     int sensorRadius;
 
     /**
-     * For sensors of FingerprintSensorType::UNDER_DISPLAY_*, this must
-     * correspond to the android.hardware.DisplayManager#getDisplay Android
-     * API.
+     * For sensors of FingerprintSensorType::UNDER_DISPLAY_*, this must correspond to the
+     * android.hardware.DisplayManager#getDisplay Android API.
      */
     int displayId;
 }