Add bluetooth.audio@2.2 implementation
Bug: 201292721
Bug: 150670922
Bug: 197297498
Test: m android.hardware.bluetooth.audio@2.2-impl
Change-Id: I224b1e001337165e5191060f0ae532933a419b68
diff --git a/bluetooth/audio/2.2/default/BluetoothAudioProvider.cpp b/bluetooth/audio/2.2/default/BluetoothAudioProvider.cpp
new file mode 100644
index 0000000..3655bc0
--- /dev/null
+++ b/bluetooth/audio/2.2/default/BluetoothAudioProvider.cpp
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "BTAudioProviderStub"
+
+#include "BluetoothAudioProvider.h"
+
+#include <android-base/logging.h>
+
+#include "BluetoothAudioSessionReport_2_2.h"
+#include "BluetoothAudioSupportedCodecsDB_2_1.h"
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace audio {
+namespace V2_2 {
+namespace implementation {
+
+using ::android::bluetooth::audio::BluetoothAudioSessionReport_2_2;
+using ::android::hardware::kSynchronizedReadWrite;
+using ::android::hardware::MessageQueue;
+using ::android::hardware::Void;
+
+using DataMQ = MessageQueue<uint8_t, kSynchronizedReadWrite>;
+
+void BluetoothAudioDeathRecipient::serviceDied(
+ uint64_t cookie __unused,
+ const wp<::android::hidl::base::V1_0::IBase>& who __unused) {
+ LOG(ERROR) << "BluetoothAudioDeathRecipient::" << __func__
+ << " - BluetoothAudio Service died";
+ provider_->endSession();
+}
+
+BluetoothAudioProvider::BluetoothAudioProvider()
+ : death_recipient_(new BluetoothAudioDeathRecipient(this)),
+ session_type_(V2_1::SessionType::UNKNOWN),
+ audio_config_({}) {}
+
+Return<void> BluetoothAudioProvider::startSession(
+ const sp<IBluetoothAudioPort>& hostIf,
+ const V2_0::AudioConfiguration& audioConfig, startSession_cb _hidl_cb) {
+ AudioConfiguration audioConfig_2_2;
+
+ if (audioConfig.getDiscriminator() ==
+ V2_0::AudioConfiguration::hidl_discriminator::pcmConfig) {
+ audioConfig_2_2.pcmConfig(
+ {.sampleRate =
+ static_cast<V2_1::SampleRate>(audioConfig.pcmConfig().sampleRate),
+ .channelMode = audioConfig.pcmConfig().channelMode,
+ .bitsPerSample = audioConfig.pcmConfig().bitsPerSample,
+ .dataIntervalUs = 0});
+ } else {
+ audioConfig_2_2.codecConfig(audioConfig.codecConfig());
+ }
+
+ return startSession_2_2(hostIf, audioConfig_2_2, _hidl_cb);
+}
+
+Return<void> BluetoothAudioProvider::startSession_2_1(
+ const sp<IBluetoothAudioPort>& hostIf,
+ const V2_1::AudioConfiguration& audioConfig, startSession_cb _hidl_cb) {
+ AudioConfiguration audioConfig_2_2;
+ if (audioConfig.getDiscriminator() ==
+ V2_1::AudioConfiguration::hidl_discriminator::leAudioCodecConfig) {
+ audioConfig_2_2.leAudioConfig().mode = LeAudioMode::UNKNOWN;
+ audioConfig_2_2.leAudioConfig().config.unicastConfig() = {
+ .streamMap = {{
+ .streamHandle = 0xFFFF,
+ .audioChannelAllocation =
+ audioConfig.leAudioCodecConfig().audioChannelAllocation,
+ }},
+ .peerDelay = 0,
+ .lc3Config = audioConfig.leAudioCodecConfig().lc3Config};
+ } else if (audioConfig.getDiscriminator() ==
+ V2_1::AudioConfiguration::hidl_discriminator::pcmConfig) {
+ audioConfig_2_2.pcmConfig(audioConfig.pcmConfig());
+ } else {
+ audioConfig_2_2.codecConfig(audioConfig.codecConfig());
+ }
+
+ return startSession_2_2(hostIf, audioConfig_2_2, _hidl_cb);
+}
+
+Return<void> BluetoothAudioProvider::startSession_2_2(
+ const sp<IBluetoothAudioPort>& hostIf,
+ const AudioConfiguration& audioConfig, startSession_cb _hidl_cb) {
+ if (hostIf == nullptr) {
+ _hidl_cb(BluetoothAudioStatus::FAILURE, DataMQ::Descriptor());
+ return Void();
+ }
+
+ /**
+ * Initialize the audio platform if audioConfiguration is supported.
+ * Save the IBluetoothAudioPort interface, so that it can be used
+ * later to send stream control commands to the HAL client, based on
+ * interaction with Audio framework.
+ */
+ audio_config_ = audioConfig;
+ stack_iface_ = hostIf;
+ stack_iface_->linkToDeath(death_recipient_, 0);
+
+ LOG(INFO) << __func__ << " - SessionType=" << toString(session_type_)
+ << ", AudioConfiguration=[" << toString(audio_config_) << "]";
+
+ onSessionReady(_hidl_cb);
+ return Void();
+}
+
+Return<void> BluetoothAudioProvider::streamStarted(
+ BluetoothAudioStatus status) {
+ LOG(INFO) << __func__ << " - SessionType=" << toString(session_type_)
+ << ", status=" << toString(status);
+
+ /**
+ * Streaming on control path has started,
+ * HAL server should start the streaming on data path.
+ */
+ if (stack_iface_) {
+ BluetoothAudioSessionReport_2_2::ReportControlStatus(session_type_, true,
+ status);
+ } else {
+ LOG(WARNING) << __func__ << " - SessionType=" << toString(session_type_)
+ << ", status=" << toString(status) << " has NO session";
+ }
+
+ return Void();
+}
+
+Return<void> BluetoothAudioProvider::streamSuspended(
+ BluetoothAudioStatus status) {
+ LOG(INFO) << __func__ << " - SessionType=" << toString(session_type_)
+ << ", status=" << toString(status);
+
+ /**
+ * Streaming on control path has suspend,
+ * HAL server should suspend the streaming on data path.
+ */
+ if (stack_iface_) {
+ BluetoothAudioSessionReport_2_2::ReportControlStatus(session_type_, false,
+ status);
+ } else {
+ LOG(WARNING) << __func__ << " - SessionType=" << toString(session_type_)
+ << ", status=" << toString(status) << " has NO session";
+ }
+
+ return Void();
+}
+
+Return<void> BluetoothAudioProvider::endSession() {
+ LOG(INFO) << __func__ << " - SessionType=" << toString(session_type_);
+
+ if (stack_iface_) {
+ BluetoothAudioSessionReport_2_2::OnSessionEnded(session_type_);
+ stack_iface_->unlinkToDeath(death_recipient_);
+ } else {
+ LOG(INFO) << __func__ << " - SessionType=" << toString(session_type_)
+ << " has NO session";
+ }
+
+ /**
+ * Clean up the audio platform as remote audio device is no
+ * longer active
+ */
+ stack_iface_ = nullptr;
+ audio_config_ = {};
+
+ return Void();
+}
+
+} // namespace implementation
+} // namespace V2_2
+} // namespace audio
+} // namespace bluetooth
+} // namespace hardware
+} // namespace android