Add thermal HAL 2.0
Bug: 116540200
Test: add default ThermalHAL 2.0 and VtsHalThermalV2_0TargetTest pass
Change-Id: Ib12634459d9ed5071230adf353b9737f5c90e771
diff --git a/thermal/2.0/default/Android.bp b/thermal/2.0/default/Android.bp
new file mode 100644
index 0000000..f620e6e
--- /dev/null
+++ b/thermal/2.0/default/Android.bp
@@ -0,0 +1,35 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_binary {
+ name: "android.hardware.thermal@2.0-service",
+ defaults: ["hidl_defaults"],
+ relative_install_path: "hw",
+ vendor: true,
+ init_rc: ["android.hardware.thermal@2.0-service.rc"],
+ vintf_fragments: ["android.hardware.thermal@2.0-service.xml"],
+ srcs: [
+ "Thermal.cpp",
+ "service.cpp"
+ ],
+ shared_libs: [
+ "libbase",
+ "libhidlbase",
+ "libhidltransport",
+ "libutils",
+ "android.hardware.thermal@2.0",
+ "android.hardware.thermal@1.0",
+ ],
+}
diff --git a/thermal/2.0/default/Thermal.cpp b/thermal/2.0/default/Thermal.cpp
new file mode 100644
index 0000000..442af61
--- /dev/null
+++ b/thermal/2.0/default/Thermal.cpp
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.thermal@2.0-service-mock"
+
+#include <cmath>
+#include <set>
+
+#include <android-base/logging.h>
+#include <hidl/HidlTransportSupport.h>
+
+#include "Thermal.h"
+
+namespace android {
+namespace hardware {
+namespace thermal {
+namespace V2_0 {
+namespace implementation {
+
+using ::android::sp;
+using ::android::hardware::interfacesEqual;
+using ::android::hardware::thermal::V1_0::ThermalStatus;
+using ::android::hardware::thermal::V1_0::ThermalStatusCode;
+
+std::set<sp<IThermalChangedCallback>> gCallbacks;
+
+static const Temperature_1_0 kTemp_1_0 = {
+ .type = static_cast<::android::hardware::thermal::V1_0::TemperatureType>(TemperatureType::CPU),
+ .name = "test temperature sensor",
+ .currentValue = 98.6,
+ .throttlingThreshold = 58,
+ .shutdownThreshold = 60.0,
+ .vrThrottlingThreshold = 59.0,
+};
+
+static const Temperature_2_0 kTemp_2_0 = {
+ .type = TemperatureType::SKIN,
+ .name = "test temperature sensor",
+ .value = 98.6,
+ .throttlingStatus = ThrottlingSeverity::CRITICAL,
+};
+
+static const TemperatureThreshold kTempThreshold = {
+ .type = TemperatureType::SKIN,
+ .name = "test temperature sensor",
+ .hotThrottlingThresholds = {{NAN, NAN, NAN, NAN, NAN, NAN, NAN}},
+ .coldThrottlingThresholds = {{NAN, NAN, NAN, NAN, NAN, NAN, NAN}},
+ .vrThrottlingThreshold = NAN,
+};
+
+static const CoolingDevice_1_0 kCooling_1_0 = {
+ .type = ::android::hardware::thermal::V1_0::CoolingType::FAN_RPM,
+ .name = "test cooling device",
+ .currentValue = 100.0,
+};
+
+static const CoolingDevice_2_0 kCooling_2_0 = {
+ .type = CoolingType::CPU,
+ .name = "test cooling device",
+ .value = 1,
+};
+
+static const CpuUsage kCpuUsage = {
+ .name = "cpu_name",
+ .active = 0,
+ .total = 0,
+ .isOnline = true,
+};
+
+// Methods from ::android::hardware::thermal::V1_0::IThermal follow.
+Return<void> Thermal::getTemperatures(getTemperatures_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ std::vector<Temperature_1_0> temperatures = {kTemp_1_0};
+ _hidl_cb(status, temperatures);
+ return Void();
+}
+
+Return<void> Thermal::getCpuUsages(getCpuUsages_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ std::vector<CpuUsage> cpu_usages = {kCpuUsage};
+ _hidl_cb(status, cpu_usages);
+ return Void();
+}
+
+Return<void> Thermal::getCoolingDevices(getCoolingDevices_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ std::vector<CoolingDevice_1_0> cooling_devices = {kCooling_1_0};
+ _hidl_cb(status, cooling_devices);
+ return Void();
+}
+
+// Methods from ::android::hardware::thermal::V2_0::IThermal follow.
+Return<void> Thermal::getCurrentTemperatures(bool filterType, TemperatureType type,
+ getCurrentTemperatures_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ std::vector<Temperature_2_0> temperatures;
+ if (filterType && type != kTemp_2_0.type) {
+ status.code = ThermalStatusCode::FAILURE;
+ status.debugMessage = "Failed to read data";
+ } else {
+ temperatures = {kTemp_2_0};
+ }
+ _hidl_cb(status, temperatures);
+ return Void();
+}
+
+Return<void> Thermal::getTemperatureThresholds(bool filterType, TemperatureType type,
+ getTemperatureThresholds_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ std::vector<TemperatureThreshold> temperature_thresholds;
+ if (filterType && type != kTempThreshold.type) {
+ status.code = ThermalStatusCode::FAILURE;
+ status.debugMessage = "Failed to read data";
+ } else {
+ temperature_thresholds = {kTempThreshold};
+ }
+ _hidl_cb(status, temperature_thresholds);
+ return Void();
+}
+
+Return<void> Thermal::getCurrentCoolingDevices(bool filterType, CoolingType type,
+ getCurrentCoolingDevices_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ std::vector<CoolingDevice_2_0> cooling_devices;
+ if (filterType && type != kCooling_2_0.type) {
+ status.code = ThermalStatusCode::FAILURE;
+ status.debugMessage = "Failed to read data";
+ } else {
+ cooling_devices = {kCooling_2_0};
+ }
+ _hidl_cb(status, cooling_devices);
+ return Void();
+}
+
+Return<void> Thermal::registerThermalChangedCallback(const sp<IThermalChangedCallback>& callback,
+ bool filterType, TemperatureType type,
+ registerThermalChangedCallback_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ std::lock_guard<std::mutex> _lock(thermal_callback_mutex_);
+ if (std::any_of(callbacks_.begin(), callbacks_.end(), [&](const CallbackSetting& c) {
+ return interfacesEqual(c.callback, callback);
+ })) {
+ status.code = ThermalStatusCode::FAILURE;
+ status.debugMessage = "Same callback interface registered already";
+ LOG(ERROR) << status.debugMessage;
+ } else {
+ callbacks_.emplace_back(callback, filterType, type);
+ LOG(INFO) << "A callback has been registered to ThermalHAL, isFilter: " << filterType
+ << " Type: " << android::hardware::thermal::V2_0::toString(type);
+ }
+ _hidl_cb(status);
+ return Void();
+}
+
+Return<void> Thermal::unregisterThermalChangedCallback(
+ const sp<IThermalChangedCallback>& callback, unregisterThermalChangedCallback_cb _hidl_cb) {
+ ThermalStatus status;
+ status.code = ThermalStatusCode::SUCCESS;
+ bool removed = false;
+ std::lock_guard<std::mutex> _lock(thermal_callback_mutex_);
+ callbacks_.erase(
+ std::remove_if(callbacks_.begin(), callbacks_.end(),
+ [&](const CallbackSetting& c) {
+ if (interfacesEqual(c.callback, callback)) {
+ LOG(INFO)
+ << "A callback has been unregistered from ThermalHAL, isFilter: "
+ << c.is_filter_type << " Type: "
+ << android::hardware::thermal::V2_0::toString(c.type);
+ removed = true;
+ return true;
+ }
+ return false;
+ }),
+ callbacks_.end());
+ if (!removed) {
+ status.code = ThermalStatusCode::FAILURE;
+ status.debugMessage = "The callback was not registered before";
+ LOG(ERROR) << status.debugMessage;
+ }
+ _hidl_cb(status);
+ return Void();
+}
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace thermal
+} // namespace hardware
+} // namespace android
diff --git a/thermal/2.0/default/Thermal.h b/thermal/2.0/default/Thermal.h
new file mode 100644
index 0000000..5fa1abd
--- /dev/null
+++ b/thermal/2.0/default/Thermal.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_THERMAL_V2_0_THERMAL_H
+#define ANDROID_HARDWARE_THERMAL_V2_0_THERMAL_H
+
+#include <android/hardware/thermal/2.0/IThermal.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace thermal {
+namespace V2_0 {
+namespace implementation {
+
+using ::android::sp;
+using ::android::hardware::hidl_array;
+using ::android::hardware::hidl_memory;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::thermal::V1_0::CpuUsage;
+using ::android::hardware::thermal::V2_0::CoolingType;
+using ::android::hardware::thermal::V2_0::IThermal;
+using CoolingDevice_1_0 = ::android::hardware::thermal::V1_0::CoolingDevice;
+using CoolingDevice_2_0 = ::android::hardware::thermal::V2_0::CoolingDevice;
+using Temperature_1_0 = ::android::hardware::thermal::V1_0::Temperature;
+using Temperature_2_0 = ::android::hardware::thermal::V2_0::Temperature;
+using ::android::hardware::thermal::V2_0::IThermalChangedCallback;
+using ::android::hardware::thermal::V2_0::TemperatureThreshold;
+using ::android::hardware::thermal::V2_0::TemperatureType;
+
+struct CallbackSetting {
+ CallbackSetting(sp<IThermalChangedCallback> callback, bool is_filter_type, TemperatureType type)
+ : callback(callback), is_filter_type(is_filter_type), type(type) {}
+ sp<IThermalChangedCallback> callback;
+ bool is_filter_type;
+ TemperatureType type;
+};
+
+class Thermal : public IThermal {
+ public:
+ // Methods from ::android::hardware::thermal::V1_0::IThermal follow.
+ Return<void> getTemperatures(getTemperatures_cb _hidl_cb) override;
+ Return<void> getCpuUsages(getCpuUsages_cb _hidl_cb) override;
+ Return<void> getCoolingDevices(getCoolingDevices_cb _hidl_cb) override;
+
+ // Methods from ::android::hardware::thermal::V2_0::IThermal follow.
+ Return<void> getCurrentTemperatures(bool filterType, TemperatureType type,
+ getCurrentTemperatures_cb _hidl_cb) override;
+ Return<void> getTemperatureThresholds(bool filterType, TemperatureType type,
+ getTemperatureThresholds_cb _hidl_cb) override;
+ Return<void> registerThermalChangedCallback(
+ const sp<IThermalChangedCallback>& callback, bool filterType, TemperatureType type,
+ registerThermalChangedCallback_cb _hidl_cb) override;
+ Return<void> unregisterThermalChangedCallback(
+ const sp<IThermalChangedCallback>& callback,
+ unregisterThermalChangedCallback_cb _hidl_cb) override;
+ Return<void> getCurrentCoolingDevices(bool filterType, CoolingType type,
+ getCurrentCoolingDevices_cb _hidl_cb) override;
+
+ private:
+ std::mutex thermal_callback_mutex_;
+ std::vector<CallbackSetting> callbacks_;
+};
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace thermal
+} // namespace hardware
+} // namespace android
+
+#endif // ANDROID_HARDWARE_THERMAL_V2_0_THERMAL_H
diff --git a/thermal/2.0/default/android.hardware.thermal@2.0-service.rc b/thermal/2.0/default/android.hardware.thermal@2.0-service.rc
new file mode 100644
index 0000000..de49d20
--- /dev/null
+++ b/thermal/2.0/default/android.hardware.thermal@2.0-service.rc
@@ -0,0 +1,5 @@
+service vendor.thermal-hal-2-0-mock /vendor/bin/hw/android.hardware.thermal@2.0-service
+ interface android.hardware.thermal@2.0::IThermal default
+ class hal
+ user system
+ group system
diff --git a/thermal/2.0/default/android.hardware.thermal@2.0-service.xml b/thermal/2.0/default/android.hardware.thermal@2.0-service.xml
new file mode 100644
index 0000000..c4c7d4d
--- /dev/null
+++ b/thermal/2.0/default/android.hardware.thermal@2.0-service.xml
@@ -0,0 +1,11 @@
+<manifest version="1.0" type="device">
+ <hal format="hidl">
+ <name>android.hardware.thermal</name>
+ <transport>hwbinder</transport>
+ <version>2.0</version>
+ <interface>
+ <name>IThermal</name>
+ <instance>default</instance>
+ </interface>
+ </hal>
+</manifest>
diff --git a/thermal/2.0/default/service.cpp b/thermal/2.0/default/service.cpp
new file mode 100644
index 0000000..dd24078
--- /dev/null
+++ b/thermal/2.0/default/service.cpp
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.thermal@2.0-service-mock"
+
+#include <android-base/logging.h>
+#include <hidl/HidlTransportSupport.h>
+#include "Thermal.h"
+
+using ::android::OK;
+using ::android::status_t;
+
+// libhwbinder:
+using ::android::hardware::configureRpcThreadpool;
+using ::android::hardware::joinRpcThreadpool;
+
+// Generated HIDL files:
+using ::android::hardware::thermal::V2_0::IThermal;
+using ::android::hardware::thermal::V2_0::implementation::Thermal;
+
+static int shutdown() {
+ LOG(ERROR) << "Thermal Service is shutting down.";
+ return 1;
+}
+
+int main(int /* argc */, char** /* argv */) {
+ status_t status;
+ android::sp<IThermal> service = nullptr;
+
+ LOG(INFO) << "Thermal HAL Service Mock 2.0 starting...";
+
+ service = new Thermal();
+ if (service == nullptr) {
+ LOG(ERROR) << "Error creating an instance of ThermalHAL. Exiting...";
+ return shutdown();
+ }
+
+ configureRpcThreadpool(1, true /* callerWillJoin */);
+
+ status = service->registerAsService();
+ if (status != OK) {
+ LOG(ERROR) << "Could not register service for ThermalHAL (" << status << ")";
+ return shutdown();
+ }
+
+ LOG(INFO) << "Thermal Service started successfully.";
+ joinRpcThreadpool();
+ // We should not get past the joinRpcThreadpool().
+ return shutdown();
+}