diff --git a/audio/aidl/default/Configuration.cpp b/audio/aidl/default/Configuration.cpp
index 635a25b..3c3dadb 100644
--- a/audio/aidl/default/Configuration.cpp
+++ b/audio/aidl/default/Configuration.cpp
@@ -105,15 +105,11 @@
     return port;
 }
 
-static AudioPortConfig createPortConfig(int32_t id, int32_t portId, PcmType pcmType, int32_t layout,
-                                        int32_t sampleRate, int32_t flags, bool isInput,
-                                        const AudioPortExt& ext) {
+static AudioPortConfig createDynamicPortConfig(int32_t id, int32_t portId, int32_t flags,
+                                               bool isInput, const AudioPortExt& ext) {
     AudioPortConfig config;
     config.id = id;
     config.portId = portId;
-    config.sampleRate = Int{.value = sampleRate};
-    config.channelMask = AudioChannelLayout::make<AudioChannelLayout::layoutMask>(layout);
-    config.format = AudioFormatDescription{.type = AudioFormatType::PCM, .pcm = pcmType};
     config.gain = AudioGainConfig();
     config.flags = isInput ? AudioIoFlags::make<AudioIoFlags::Tag::input>(flags)
                            : AudioIoFlags::make<AudioIoFlags::Tag::output>(flags);
@@ -121,6 +117,16 @@
     return config;
 }
 
+static AudioPortConfig createPortConfig(int32_t id, int32_t portId, PcmType pcmType, int32_t layout,
+                                        int32_t sampleRate, int32_t flags, bool isInput,
+                                        const AudioPortExt& ext) {
+    AudioPortConfig config = createDynamicPortConfig(id, portId, flags, isInput, ext);
+    config.sampleRate = Int{.value = sampleRate};
+    config.channelMask = AudioChannelLayout::make<AudioChannelLayout::layoutMask>(layout);
+    config.format = AudioFormatDescription{.type = AudioFormatType::PCM, .pcm = pcmType};
+    return config;
+}
+
 static AudioRoute createRoute(const std::vector<AudioPort>& sources, const AudioPort& sink) {
     AudioRoute route;
     route.sinkPortId = sink.id;
@@ -147,8 +153,7 @@
 //  * "primary output", PRIMARY, 1 max open, 1 max active stream
 //    - profile PCM 16-bit; MONO, STEREO; 8000, 11025, 16000, 32000, 44100, 48000
 //  * "primary input", 1 max open, 1 max active stream
-//    - profile PCM 16-bit; MONO, STEREO;
-//        8000, 11025, 16000, 32000, 44100, 48000
+//    - profile PCM 16-bit; MONO, STEREO; 8000, 11025, 16000, 32000, 44100, 48000
 //  * "telephony_tx", 1 max open, 1 max active stream
 //    - profile PCM 16-bit; MONO, STEREO; 8000, 11025, 16000, 32000, 44100, 48000
 //  * "telephony_rx", 1 max open, 1 max active stream
@@ -164,11 +169,11 @@
 //  "FM Tuner" -> "fm_tuner"
 //
 // Initial port configs:
-//  * "Speaker" device port: PCM 16-bit; STEREO; 48000
-//  * "Built-In Mic" device port: PCM 16-bit; MONO; 48000
-//  * "Telephony Tx" device port: PCM 16-bit; MONO; 48000
-//  * "Telephony Rx" device port: PCM 16-bit; MONO; 48000
-//  * "FM Tuner" device port: PCM 16-bit; STEREO; 48000
+//  * "Speaker" device port: dynamic configuration
+//  * "Built-In Mic" device port: dynamic configuration
+//  * "Telephony Tx" device port: dynamic configuration
+//  * "Telephony Rx" device port: dynamic configuration
+//  * "FM Tuner" device port: dynamic configuration
 //
 std::unique_ptr<Configuration> getPrimaryConfiguration() {
     static const Configuration configuration = []() {
@@ -186,9 +191,8 @@
                                            1 << AudioPortDeviceExt::FLAG_INDEX_DEFAULT_DEVICE));
         c.ports.push_back(speakerOutDevice);
         c.initialConfigs.push_back(
-                createPortConfig(speakerOutDevice.id, speakerOutDevice.id, PcmType::INT_16_BIT,
-                                 AudioChannelLayout::LAYOUT_STEREO, 48000, 0, false,
-                                 createDeviceExt(AudioDeviceType::OUT_SPEAKER, 0)));
+                createDynamicPortConfig(speakerOutDevice.id, speakerOutDevice.id, 0, false,
+                                        createDeviceExt(AudioDeviceType::OUT_SPEAKER, 0)));
 
         AudioPort micInDevice =
                 createPort(c.nextPortId++, "Built-In Mic", 0, true,
@@ -196,35 +200,31 @@
                                            1 << AudioPortDeviceExt::FLAG_INDEX_DEFAULT_DEVICE));
         c.ports.push_back(micInDevice);
         c.initialConfigs.push_back(
-                createPortConfig(micInDevice.id, micInDevice.id, PcmType::INT_16_BIT,
-                                 AudioChannelLayout::LAYOUT_MONO, 48000, 0, true,
-                                 createDeviceExt(AudioDeviceType::IN_MICROPHONE, 0)));
+                createDynamicPortConfig(micInDevice.id, micInDevice.id, 0, true,
+                                        createDeviceExt(AudioDeviceType::IN_MICROPHONE, 0)));
 
         AudioPort telephonyTxOutDevice =
                 createPort(c.nextPortId++, "Telephony Tx", 0, false,
                            createDeviceExt(AudioDeviceType::OUT_TELEPHONY_TX, 0));
         c.ports.push_back(telephonyTxOutDevice);
         c.initialConfigs.push_back(
-                createPortConfig(telephonyTxOutDevice.id, telephonyTxOutDevice.id,
-                                 PcmType::INT_16_BIT, AudioChannelLayout::LAYOUT_MONO, 48000, 0,
-                                 false, createDeviceExt(AudioDeviceType::OUT_TELEPHONY_TX, 0)));
+                createDynamicPortConfig(telephonyTxOutDevice.id, telephonyTxOutDevice.id, 0, false,
+                                        createDeviceExt(AudioDeviceType::OUT_TELEPHONY_TX, 0)));
 
         AudioPort telephonyRxInDevice =
                 createPort(c.nextPortId++, "Telephony Rx", 0, true,
                            createDeviceExt(AudioDeviceType::IN_TELEPHONY_RX, 0));
         c.ports.push_back(telephonyRxInDevice);
         c.initialConfigs.push_back(
-                createPortConfig(telephonyRxInDevice.id, telephonyRxInDevice.id,
-                                 PcmType::INT_16_BIT, AudioChannelLayout::LAYOUT_MONO, 48000, 0,
-                                 true, createDeviceExt(AudioDeviceType::IN_TELEPHONY_RX, 0)));
+                createDynamicPortConfig(telephonyRxInDevice.id, telephonyRxInDevice.id, 0, true,
+                                        createDeviceExt(AudioDeviceType::IN_TELEPHONY_RX, 0)));
 
         AudioPort fmTunerInDevice = createPort(c.nextPortId++, "FM Tuner", 0, true,
                                                createDeviceExt(AudioDeviceType::IN_FM_TUNER, 0));
         c.ports.push_back(fmTunerInDevice);
         c.initialConfigs.push_back(
-                createPortConfig(fmTunerInDevice.id, fmTunerInDevice.id, PcmType::INT_16_BIT,
-                                 AudioChannelLayout::LAYOUT_STEREO, 48000, 0, true,
-                                 createDeviceExt(AudioDeviceType::IN_FM_TUNER, 0)));
+                createDynamicPortConfig(fmTunerInDevice.id, fmTunerInDevice.id, 0, true,
+                                        createDeviceExt(AudioDeviceType::IN_FM_TUNER, 0)));
 
         // Mix ports
 
@@ -287,13 +287,15 @@
 
 // Note: When transitioning to loading of XML configs, either keep the configuration
 // of the remote submix sources from this static configuration, or update the XML
-// config to match it. There are two reasons for that:
-//   1. The canonical r_submix configuration only lists 'STEREO' and '48000',
+// config to match it. There are several reasons for that:
+//   1. The "Remote Submix In" device is listed in the XML config as "attached",
+//      however in the AIDL scheme its device type has a "virtual" connection.
+//   2. The canonical r_submix configuration only lists 'STEREO' and '48000',
 //      however the framework attempts to open streams for other sample rates
 //      as well. The legacy r_submix implementation allowed that, but libaudiohal@aidl
 //      will not find a mix port to use. Because of that, list all channel
 //      masks and sample rates that the legacy implementation allowed.
-//   2. The legacy implementation had a hard limit on the number of routes (10),
+//   3. The legacy implementation had a hard limit on the number of routes (10),
 //      and this is checked indirectly by AudioPlaybackCaptureTest#testPlaybackCaptureDoS
 //      CTS test. Instead of hardcoding the number of routes, we can use
 //      "maxOpen/ActiveStreamCount" to enforce a similar limit. However, the canonical
@@ -331,15 +333,15 @@
                 createPort(c.nextPortId++, "Remote Submix Out", 0, false,
                            createDeviceExt(AudioDeviceType::OUT_SUBMIX, 0,
                                            AudioDeviceDescription::CONNECTION_VIRTUAL));
-        rsubmixOutDevice.profiles = standardPcmAudioProfiles;
         c.ports.push_back(rsubmixOutDevice);
+        c.connectedProfiles[rsubmixOutDevice.id] = standardPcmAudioProfiles;
 
         AudioPort rsubmixInDevice =
                 createPort(c.nextPortId++, "Remote Submix In", 0, true,
                            createDeviceExt(AudioDeviceType::IN_SUBMIX, 0,
                                            AudioDeviceDescription::CONNECTION_VIRTUAL));
-        rsubmixInDevice.profiles = standardPcmAudioProfiles;
         c.ports.push_back(rsubmixInDevice);
+        c.connectedProfiles[rsubmixInDevice.id] = standardPcmAudioProfiles;
 
         // Mix ports
 
@@ -384,7 +386,7 @@
 //  * "usb_device output" -> "USB Headset Out"
 //  * "USB Device In", "USB Headset In" -> "usb_device input"
 //
-// Profiles for device port connected state:
+// Profiles for device port connected state (when simulating connections):
 //  * "USB Device Out", "USB Headset Out":
 //    - profile PCM 16-bit; MONO, STEREO, INDEX_MASK_1, INDEX_MASK_2; 44100, 48000
 //    - profile PCM 24-bit; MONO, STEREO, INDEX_MASK_1, INDEX_MASK_2; 44100, 48000
@@ -461,9 +463,9 @@
 //  * "Test In", IN_AFE_PROXY
 //    - no profiles specified
 //  * "Wired Headset", OUT_HEADSET
-//    - profile PCM 24-bit; STEREO; 48000
+//    - no profiles specified
 //  * "Wired Headset Mic", IN_HEADSET
-//    - profile PCM 24-bit; MONO; 48000
+//    - no profiles specified
 //
 // Mix ports:
 //  * "test output", 1 max open, 1 max active stream
@@ -486,6 +488,10 @@
 //  * "Test Out" device port: PCM 24-bit; STEREO; 48000
 //  * "Test In" device port: PCM 24-bit; MONO; 48000
 //
+// Profiles for device port connected state (when simulating connections):
+//  * "Wired Headset": dynamic profiles
+//  * "Wired Headset Mic": dynamic profiles
+//
 std::unique_ptr<Configuration> getStubConfiguration() {
     static const Configuration configuration = []() {
         Configuration c;
@@ -504,8 +510,6 @@
                 createPort(c.nextPortId++, "Wired Headset", 0, false,
                            createDeviceExt(AudioDeviceType::OUT_HEADSET, 0,
                                            AudioDeviceDescription::CONNECTION_ANALOG));
-        headsetOutDevice.profiles.push_back(
-                createProfile(PcmType::INT_24_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {48000}));
         c.ports.push_back(headsetOutDevice);
 
         AudioPort testInDevice = createPort(c.nextPortId++, "Test In", 0, true,
@@ -520,8 +524,6 @@
                 createPort(c.nextPortId++, "Wired Headset Mic", 0, true,
                            createDeviceExt(AudioDeviceType::IN_HEADSET, 0,
                                            AudioDeviceDescription::CONNECTION_ANALOG));
-        headsetInDevice.profiles.push_back(
-                createProfile(PcmType::INT_24_BIT, {AudioChannelLayout::LAYOUT_MONO}, {48000}));
         c.ports.push_back(headsetInDevice);
 
         // Mix ports
@@ -553,24 +555,24 @@
                               {44100, 48000}));
         c.ports.push_back(compressedOffloadOutMix);
 
-        AudioPort testInMIx =
+        AudioPort testInMix =
                 createPort(c.nextPortId++, "test input", 0, true, createPortMixExt(2, 2));
-        testInMIx.profiles.push_back(
+        testInMix.profiles.push_back(
                 createProfile(PcmType::INT_16_BIT,
                               {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO,
                                AudioChannelLayout::LAYOUT_FRONT_BACK},
                               {8000, 11025, 16000, 22050, 32000, 44100, 48000}));
-        testInMIx.profiles.push_back(
+        testInMix.profiles.push_back(
                 createProfile(PcmType::INT_24_BIT,
                               {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO,
                                AudioChannelLayout::LAYOUT_FRONT_BACK},
                               {8000, 11025, 16000, 22050, 32000, 44100, 48000}));
-        c.ports.push_back(testInMIx);
+        c.ports.push_back(testInMix);
 
         c.routes.push_back(
                 createRoute({testOutMix, testFastOutMix, compressedOffloadOutMix}, testOutDevice));
         c.routes.push_back(createRoute({testOutMix}, headsetOutDevice));
-        c.routes.push_back(createRoute({testInDevice, headsetInDevice}, testInMIx));
+        c.routes.push_back(createRoute({testInDevice, headsetInDevice}, testInMix));
 
         c.portConfigs.insert(c.portConfigs.end(), c.initialConfigs.begin(), c.initialConfigs.end());
 
@@ -603,11 +605,19 @@
 //  "a2dp output" -> "BT A2DP Speaker"
 //  "hearing aid output" -> "BT Hearing Aid Out"
 //
+// Profiles for device port connected state (when simulating connections):
+//  * "BT A2DP Out", "BT A2DP Headphones", "BT A2DP Speaker":
+//    - profile PCM 16-bit; STEREO; 44100, 48000, 88200, 96000
+//  * "BT Hearing Aid Out":
+//    - profile PCM 16-bit; STEREO; 16000, 24000
+//
 std::unique_ptr<Configuration> getBluetoothConfiguration() {
     static const Configuration configuration = []() {
         const std::vector<AudioProfile> standardPcmAudioProfiles = {
                 createProfile(PcmType::INT_16_BIT, {AudioChannelLayout::LAYOUT_STEREO},
                               {44100, 48000, 88200, 96000})};
+        const std::vector<AudioProfile> hearingAidAudioProfiles = {createProfile(
+                PcmType::INT_16_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {16000, 24000})};
         Configuration c;
 
         // Device ports
@@ -645,8 +655,7 @@
                            createDeviceExt(AudioDeviceType::OUT_HEARING_AID, 0,
                                            AudioDeviceDescription::CONNECTION_WIRELESS));
         c.ports.push_back(btOutHearingAid);
-        c.connectedProfiles[btOutHearingAid.id] = std::vector<AudioProfile>(
-                {createProfile(PcmType::INT_16_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {16000})});
+        c.connectedProfiles[btOutHearingAid.id] = hearingAidAudioProfiles;
 
         // Mix ports
         AudioPort btOutMix =
@@ -655,8 +664,7 @@
 
         AudioPort btHearingOutMix =
                 createPort(c.nextPortId++, "hearing aid output", 0, false, createPortMixExt(1, 1));
-        btHearingOutMix.profiles.push_back(createProfile(
-                PcmType::INT_16_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {16000, 24000}));
+        btHearingOutMix.profiles = hearingAidAudioProfiles;
         c.ports.push_back(btHearingOutMix);
 
         c.routes.push_back(createRoute({btOutMix}, btOutDevice));