diff --git a/radio/1.5/IRadio.hal b/radio/1.5/IRadio.hal
index 62a2c61..09be37a 100644
--- a/radio/1.5/IRadio.hal
+++ b/radio/1.5/IRadio.hal
@@ -18,8 +18,10 @@
 
 import @1.2::DataRequestReason;
 import @1.4::IRadio;
+import @1.4::DataProfileInfo;
 import @1.5::AccessNetwork;
 import @1.5::DataProfileInfo;
+import @1.5::LinkAddress;
 import @1.5::NetworkScanRequest;
 import @1.5::RadioAccessSpecifier;
 import @1.5::SignalThresholdInfo;
@@ -149,11 +151,7 @@
      * @param reason The request reason. Must be DataRequestReason.NORMAL or
      *     DataRequestReason.HANDOVER.
      * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
-     *     addresses of the existing data connection. The format is IP address with optional "/"
-     *     prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
-     *     "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
-     *     the prefix length is absent, then the addresses are assumed to be point to point with
-     *     IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored
+     *     addresses of the existing data connection. This parameter must be ignored
      *     unless reason is DataRequestReason.HANDOVER.
      * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
      *     addresses of the existing data connection. The format is defined in RFC-4291 section
@@ -167,7 +165,7 @@
      */
     oneway setupDataCall_1_5(int32_t serial, AccessNetwork accessNetwork,
             DataProfileInfo dataProfileInfo, bool roamingAllowed,
-            DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+            DataRequestReason reason, vec<LinkAddress> addresses, vec<string> dnses);
 
     /**
      * Set an apn to initial attach network
@@ -191,7 +189,7 @@
      * Response callback is IRadioResponse.setDataProfileResponse_1_5()
      *
      * Note this API is the same as the 1.4 version except using the 1.5 DataProfileInfo
-     * as the input param.
+     * and LinkAddress as the input param.
      */
     oneway setDataProfile_1_5(int32_t serial, vec<DataProfileInfo> profiles);
 
diff --git a/radio/1.5/IRadioResponse.hal b/radio/1.5/IRadioResponse.hal
index 7a0bc57..968948b 100644
--- a/radio/1.5/IRadioResponse.hal
+++ b/radio/1.5/IRadioResponse.hal
@@ -18,7 +18,7 @@
 
 import @1.0::RadioResponseInfo;
 import @1.4::IRadioResponse;
-import @1.4::SetupDataCallResult;
+import @1.5::SetupDataCallResult;
 
 /**
  * Interface declaring response functions to solicited radio requests.
diff --git a/radio/1.5/types.hal b/radio/1.5/types.hal
index 5795f7b..750114a 100644
--- a/radio/1.5/types.hal
+++ b/radio/1.5/types.hal
@@ -25,7 +25,10 @@
 import @1.2::NetworkScanRequest;
 import @1.4::AccessNetwork;
 import @1.4::ApnTypes;
+import @1.4::DataCallFailCause;
+import @1.4::DataConnActiveStatus;
 import @1.4::DataProfileInfo;
+import @1.4::PdpProtocolType;
 
 /**
  * Defining signal strength type.
@@ -289,3 +292,105 @@
     /** Supported APN types bitmap. See ApnTypes for the value of each bit. */
     bitfield<ApnTypes> supportedApnTypesBitmap;
 };
+
+/**
+ * The properties of the link address. This enum reflects the definition in
+ * if_addr.h in Linux kernel.
+ */
+enum AddressProperty : int32_t {
+    NONE = 0,
+
+    /** Indicates this address is deprecated */
+    DEPRECATED = 0x20,
+};
+
+struct LinkAddress {
+    /**
+     * The format is IP address with optional "/"
+     * prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
+     * "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
+     * the prefix length is absent, then the addresses are assumed to be point to point with
+     * IPv4 with prefix length 32 or IPv6 with prefix length 128.
+     */
+    string address;
+
+    /**
+     * The properties of the link address
+     */
+    bitfield<AddressProperty> properties;
+
+    /**
+     * The UTC time that this link address will be deprecated. 0 indicates this information is not
+     * available.
+     */
+    uint64_t deprecatedTime;
+
+    /**
+     * The UTC time that this link address will expire and no longer valid. 0 indicates this
+     * information is not available.
+     */
+    uint64_t expiredTime;
+};
+
+/**
+ * Overwritten from @1.4::SetupDataCallResult in order to update the addresses to 1.5
+ * version.
+ */
+struct SetupDataCallResult {
+    /** Data call fail cause. DataCallFailCause.NONE if no error. */
+    DataCallFailCause cause;
+
+    /**
+     * If status != DataCallFailCause.NONE, this field indicates the suggested retry back-off timer
+     * value RIL wants to override the one pre-configured in FW. The unit is milliseconds.
+     * The value < 0 means no value is suggested.
+     * The value 0 means retry must be done ASAP.
+     * The value of INT_MAX(0x7fffffff) means no retry.
+     */
+    int32_t suggestedRetryTime;
+
+    /** Context ID, uniquely identifies this call. */
+    int32_t cid;
+
+    /** Data connection active status. */
+    DataConnActiveStatus active;
+
+    /**
+     * PDP_type values. If cause is DataCallFailCause.ONLY_SINGLE_BEARER_ALLOWED, this is the type
+     * supported such as "IP" or "IPV6".
+     */
+    PdpProtocolType type;
+
+    /** The network interface name. */
+    string ifname;
+
+    /**
+     * List of link address.
+     */
+    vec<LinkAddress> addresses;
+
+    /**
+     * List of DNS server addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". Empty if no dns
+     * server addresses returned.
+     */
+    vec<string> dnses;
+
+    /**
+     * List of default gateway addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+     * When empty, the addresses represent point to point connections.
+     */
+    vec<string> gateways;
+
+    /**
+     * List of P-CSCF(Proxy Call State Control Function) addresses via PCO(Protocol Configuration
+     * Option), e.g., "2001:db8::1 2001:db8::2 2001:db8::3". Empty if not IMS client.
+     */
+    vec<string> pcscf;
+
+    /**
+     * MTU received from network. Value <= 0 means network has either not sent a value or sent an
+     * invalid value.
+     */
+    int32_t mtu;
+};
+
diff --git a/radio/1.5/vts/functional/radio_hidl_hal_api.cpp b/radio/1.5/vts/functional/radio_hidl_hal_api.cpp
index d05d2cb..77d9a02 100644
--- a/radio/1.5/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.5/vts/functional/radio_hidl_hal_api.cpp
@@ -853,10 +853,11 @@
 
     bool roamingAllowed = false;
 
+    std::vector<::android::hardware::radio::V1_5::LinkAddress> addresses = {};
+    std::vector<hidl_string> dnses = {};
+
     ::android::hardware::radio::V1_2::DataRequestReason reason =
             ::android::hardware::radio::V1_2::DataRequestReason::NORMAL;
-    std::vector<hidl_string> addresses = {""};
-    std::vector<hidl_string> dnses = {""};
 
     Return<void> res = radio_v1_5->setupDataCall_1_5(serial, accessNetwork, dataProfileInfo,
                                                      roamingAllowed, reason, addresses, dnses);
diff --git a/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h b/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h
index c2ee94e..ba11257 100644
--- a/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h
+++ b/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h
@@ -544,7 +544,7 @@
 
     Return<void> setupDataCallResponse_1_5(
             const RadioResponseInfo& info,
-            const android::hardware::radio::V1_4::SetupDataCallResult& dcResponse);
+            const android::hardware::radio::V1_5::SetupDataCallResult& dcResponse);
 
     Return<void> setInitialAttachApnResponse_1_5(const RadioResponseInfo& info);
 
diff --git a/radio/1.5/vts/functional/radio_response.cpp b/radio/1.5/vts/functional/radio_response.cpp
index 8932a64..a0b3d5f 100644
--- a/radio/1.5/vts/functional/radio_response.cpp
+++ b/radio/1.5/vts/functional/radio_response.cpp
@@ -931,7 +931,7 @@
 
 Return<void> RadioResponse_v1_5::setupDataCallResponse_1_5(
         const RadioResponseInfo& info,
-        const android::hardware::radio::V1_4::SetupDataCallResult& /* dcResponse */) {
+        const android::hardware::radio::V1_5::SetupDataCallResult& /* dcResponse */) {
     rspInfo = info;
     parent_v1_5.notify(info.serial);
     return Void();