diff --git a/Android.bp b/Android.bp
index 68115aa..baf3291 100644
--- a/Android.bp
+++ b/Android.bp
@@ -86,9 +86,3 @@
         "VtsHalHidlTargetTestBase",
     ],
 }
-
-dirgroup {
-    name: "trusty_dirgroup_hardware_interfaces",
-    dirs: ["."],
-    visibility: ["//trusty/vendor/google/aosp/scripts"],
-}
diff --git a/audio/aidl/android/hardware/audio/core/stream-out-async-sm.gv b/audio/aidl/android/hardware/audio/core/stream-out-async-sm.gv
index 56b7926..e2da90d 100644
--- a/audio/aidl/android/hardware/audio/core/stream-out-async-sm.gv
+++ b/audio/aidl/android/hardware/audio/core/stream-out-async-sm.gv
@@ -45,6 +45,8 @@
     PAUSED -> ACTIVE [label="start"];                 // consumer -> active
     PAUSED -> IDLE [label="flush"];                   // producer -> passive, buffer is cleared
     DRAINING -> IDLE [label="←IStreamCallback.onDrainReady"];
+    DRAINING -> DRAINING [label="←IStreamCallback.onDrainReady"];  // allowed for `DRAIN_EARLY_NOTIFY`
+    DRAINING -> IDLE [label="<empty buffer>"];        // allowed for `DRAIN_EARLY_NOTIFY`
     DRAINING -> TRANSFERRING [label="burst"];         // producer -> active
     DRAINING -> ACTIVE [label="burst"];               // full write
     DRAINING -> DRAIN_PAUSED [label="pause"];         // consumer -> passive (not consuming)
diff --git a/audio/aidl/default/Module.cpp b/audio/aidl/default/Module.cpp
index 51b6085..e96cf81 100644
--- a/audio/aidl/default/Module.cpp
+++ b/audio/aidl/default/Module.cpp
@@ -207,9 +207,9 @@
         return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
     }
     const auto& flags = portConfigIt->flags.value();
-    StreamContext::DebugParameters params{mDebug.streamTransientStateDelayMs,
-                                          mVendorDebug.forceTransientBurst,
-                                          mVendorDebug.forceSynchronousDrain};
+    StreamContext::DebugParameters params{
+            mDebug.streamTransientStateDelayMs, mVendorDebug.forceTransientBurst,
+            mVendorDebug.forceSynchronousDrain, mVendorDebug.forceDrainToDraining};
     std::unique_ptr<StreamContext::DataMQ> dataMQ = nullptr;
     std::shared_ptr<IStreamCallback> streamAsyncCallback = nullptr;
     std::shared_ptr<ISoundDose> soundDose;
@@ -1524,6 +1524,7 @@
 
 const std::string Module::VendorDebug::kForceTransientBurstName = "aosp.forceTransientBurst";
 const std::string Module::VendorDebug::kForceSynchronousDrainName = "aosp.forceSynchronousDrain";
+const std::string Module::VendorDebug::kForceDrainToDrainingName = "aosp.forceDrainToDraining";
 
 ndk::ScopedAStatus Module::getVendorParameters(const std::vector<std::string>& in_ids,
                                                std::vector<VendorParameter>* _aidl_return) {
@@ -1538,6 +1539,10 @@
             VendorParameter forceSynchronousDrain{.id = id};
             forceSynchronousDrain.ext.setParcelable(Boolean{mVendorDebug.forceSynchronousDrain});
             _aidl_return->push_back(std::move(forceSynchronousDrain));
+        } else if (id == VendorDebug::kForceDrainToDrainingName) {
+            VendorParameter forceDrainToDraining{.id = id};
+            forceDrainToDraining.ext.setParcelable(Boolean{mVendorDebug.forceDrainToDraining});
+            _aidl_return->push_back(std::move(forceDrainToDraining));
         } else {
             allParametersKnown = false;
             LOG(VERBOSE) << __func__ << ": " << mType << ": unrecognized parameter \"" << id << "\"";
@@ -1578,6 +1583,10 @@
             if (!extractParameter<Boolean>(p, &mVendorDebug.forceSynchronousDrain)) {
                 return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
             }
+        } else if (p.id == VendorDebug::kForceDrainToDrainingName) {
+            if (!extractParameter<Boolean>(p, &mVendorDebug.forceDrainToDraining)) {
+                return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+            }
         } else {
             allParametersKnown = false;
             LOG(VERBOSE) << __func__ << ": " << mType << ": unrecognized parameter \"" << p.id
diff --git a/audio/aidl/default/Stream.cpp b/audio/aidl/default/Stream.cpp
index 3d7f30c..4525f6a 100644
--- a/audio/aidl/default/Stream.cpp
+++ b/audio/aidl/default/Stream.cpp
@@ -382,8 +382,20 @@
 const std::string StreamOutWorkerLogic::kThreadName = "writer";
 
 StreamOutWorkerLogic::Status StreamOutWorkerLogic::cycle() {
-    if (mState == StreamDescriptor::State::DRAINING ||
-        mState == StreamDescriptor::State::TRANSFERRING) {
+    if (mState == StreamDescriptor::State::DRAINING && mContext->getForceDrainToDraining() &&
+        mOnDrainReadyStatus == OnDrainReadyStatus::UNSENT) {
+        std::shared_ptr<IStreamCallback> asyncCallback = mContext->getAsyncCallback();
+        if (asyncCallback != nullptr) {
+            ndk::ScopedAStatus status = asyncCallback->onDrainReady();
+            if (!status.isOk()) {
+                LOG(ERROR) << __func__ << ": error from onDrainReady: " << status;
+            }
+            // This sets the timeout for moving into IDLE on next iterations.
+            switchToTransientState(StreamDescriptor::State::DRAINING);
+            mOnDrainReadyStatus = OnDrainReadyStatus::SENT;
+        }
+    } else if (mState == StreamDescriptor::State::DRAINING ||
+               mState == StreamDescriptor::State::TRANSFERRING) {
         if (auto stateDurationMs = std::chrono::duration_cast<std::chrono::milliseconds>(
                     std::chrono::steady_clock::now() - mTransientStateStart);
             stateDurationMs >= mTransientStateDelayMs) {
@@ -396,9 +408,12 @@
                 // drain or transfer completion. In the stub, we switch unconditionally.
                 if (mState == StreamDescriptor::State::DRAINING) {
                     mState = StreamDescriptor::State::IDLE;
-                    ndk::ScopedAStatus status = asyncCallback->onDrainReady();
-                    if (!status.isOk()) {
-                        LOG(ERROR) << __func__ << ": error from onDrainReady: " << status;
+                    if (mOnDrainReadyStatus != OnDrainReadyStatus::SENT) {
+                        ndk::ScopedAStatus status = asyncCallback->onDrainReady();
+                        if (!status.isOk()) {
+                            LOG(ERROR) << __func__ << ": error from onDrainReady: " << status;
+                        }
+                        mOnDrainReadyStatus = OnDrainReadyStatus::SENT;
                     }
                 } else {
                     mState = StreamDescriptor::State::ACTIVE;
@@ -537,6 +552,10 @@
                             mState = StreamDescriptor::State::IDLE;
                         } else {
                             switchToTransientState(StreamDescriptor::State::DRAINING);
+                            mOnDrainReadyStatus =
+                                    mode == StreamDescriptor::DrainMode::DRAIN_EARLY_NOTIFY
+                                            ? OnDrainReadyStatus::UNSENT
+                                            : OnDrainReadyStatus::IGNORE;
                         }
                     } else {
                         LOG(ERROR) << __func__ << ": drain failed: " << status;
diff --git a/audio/aidl/default/include/core-impl/Module.h b/audio/aidl/default/include/core-impl/Module.h
index 7e32cf2..d03598a 100644
--- a/audio/aidl/default/include/core-impl/Module.h
+++ b/audio/aidl/default/include/core-impl/Module.h
@@ -148,8 +148,10 @@
     struct VendorDebug {
         static const std::string kForceTransientBurstName;
         static const std::string kForceSynchronousDrainName;
+        static const std::string kForceDrainToDrainingName;
         bool forceTransientBurst = false;
         bool forceSynchronousDrain = false;
+        bool forceDrainToDraining = false;
     };
     // ids of device ports created at runtime via 'connectExternalDevice'.
     // Also stores a list of ids of mix ports with dynamic profiles that were populated from
diff --git a/audio/aidl/default/include/core-impl/Stream.h b/audio/aidl/default/include/core-impl/Stream.h
index f7b9269..8297fc5 100644
--- a/audio/aidl/default/include/core-impl/Stream.h
+++ b/audio/aidl/default/include/core-impl/Stream.h
@@ -78,6 +78,10 @@
         bool forceTransientBurst = false;
         // Force the "drain" command to be synchronous, going directly to the IDLE state.
         bool forceSynchronousDrain = false;
+        // Force the "drain early notify" command to keep the SM in the DRAINING state
+        // after sending 'onDrainReady' callback. The SM moves to IDLE after
+        // 'transientStateDelayMs'.
+        bool forceDrainToDraining = false;
     };
 
     StreamContext() = default;
@@ -119,6 +123,7 @@
     ::aidl::android::media::audio::common::AudioIoFlags getFlags() const { return mFlags; }
     bool getForceTransientBurst() const { return mDebugParameters.forceTransientBurst; }
     bool getForceSynchronousDrain() const { return mDebugParameters.forceSynchronousDrain; }
+    bool getForceDrainToDraining() const { return mDebugParameters.forceDrainToDraining; }
     size_t getFrameSize() const;
     int getInternalCommandCookie() const { return mInternalCommandCookie; }
     int32_t getMixPortHandle() const { return mMixPortHandle; }
@@ -301,6 +306,9 @@
     bool write(size_t clientSize, StreamDescriptor::Reply* reply);
 
     std::shared_ptr<IStreamOutEventCallback> mEventCallback;
+
+    enum OnDrainReadyStatus : int32_t { IGNORE /*used for DRAIN_ALL*/, UNSENT, SENT };
+    OnDrainReadyStatus mOnDrainReadyStatus = OnDrainReadyStatus::IGNORE;
 };
 using StreamOutWorker = StreamWorkerImpl<StreamOutWorkerLogic>;
 
diff --git a/audio/aidl/vts/VtsHalAudioCoreModuleTargetTest.cpp b/audio/aidl/vts/VtsHalAudioCoreModuleTargetTest.cpp
index 6bfba65..6bce107 100644
--- a/audio/aidl/vts/VtsHalAudioCoreModuleTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalAudioCoreModuleTargetTest.cpp
@@ -117,6 +117,10 @@
 using ndk::enum_range;
 using ndk::ScopedAStatus;
 
+static constexpr int32_t kAidlVersion1 = 1;
+static constexpr int32_t kAidlVersion2 = 2;
+static constexpr int32_t kAidlVersion3 = 3;
+
 template <typename T>
 std::set<int32_t> extractIds(const std::vector<T>& v) {
     std::set<int32_t> ids;
@@ -452,7 +456,6 @@
     // This is implemented by the 'StreamFixture' utility class.
     static constexpr int kNegativeTestBufferSizeFrames = 256;
     static constexpr int kDefaultLargeBufferSizeFrames = 48000;
-    static constexpr int32_t kAidlVersion3 = 3;
 
     void SetUpImpl(const std::string& moduleName, bool setUpDebug = true) {
         ASSERT_NO_FATAL_FAILURE(ConnectToService(moduleName, setUpDebug));
@@ -582,7 +585,7 @@
     std::unique_ptr<WithDebugFlags> debug;
     std::vector<AudioPort> initialPorts;
     std::vector<AudioRoute> initialRoutes;
-    int32_t aidlVersion;
+    int32_t aidlVersion = -1;
 };
 
 class WithDevicePortConnectedState {
@@ -1837,6 +1840,7 @@
 }
 
 TEST_P(AudioCoreModule, SetAudioPortConfigInvalidPortAudioGain) {
+    ASSERT_GE(aidlVersion, kAidlVersion1);
     if (aidlVersion < kAidlVersion3) {
         GTEST_SKIP() << "Skip for audio HAL version lower than " << kAidlVersion3;
     }
@@ -4021,6 +4025,7 @@
 
 enum {
     NAMED_CMD_NAME,
+    NAMED_CMD_MIN_INTERFACE_VERSION,
     NAMED_CMD_DELAY_MS,
     NAMED_CMD_STREAM_TYPE,
     NAMED_CMD_CMDS,
@@ -4028,7 +4033,7 @@
 };
 enum class StreamTypeFilter { ANY, SYNC, ASYNC };
 using NamedCommandSequence =
-        std::tuple<std::string, int /*cmdDelayMs*/, StreamTypeFilter,
+        std::tuple<std::string, int /*minInterfaceVersion*/, int /*cmdDelayMs*/, StreamTypeFilter,
                    std::shared_ptr<StateSequence>, bool /*validatePositionIncrease*/>;
 enum { PARAM_MODULE_NAME, PARAM_CMD_SEQ, PARAM_SETUP_SEQ };
 using StreamIoTestParameters =
@@ -4039,6 +4044,12 @@
   public:
     void SetUp() override {
         ASSERT_NO_FATAL_FAILURE(SetUpImpl(std::get<PARAM_MODULE_NAME>(GetParam())));
+        ASSERT_GE(aidlVersion, kAidlVersion1);
+        if (const int minVersion =
+                    std::get<NAMED_CMD_MIN_INTERFACE_VERSION>(std::get<PARAM_CMD_SEQ>(GetParam()));
+            aidlVersion < minVersion) {
+            GTEST_SKIP() << "Skip for audio HAL version lower than " << minVersion;
+        }
         ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
     }
 
@@ -4048,6 +4059,20 @@
         if (allPortConfigs.empty()) {
             GTEST_SKIP() << "No mix ports have attached devices";
         }
+        const auto& commandsAndStates =
+                std::get<NAMED_CMD_CMDS>(std::get<PARAM_CMD_SEQ>(GetParam()));
+        const bool validatePositionIncrease =
+                std::get<NAMED_CMD_VALIDATE_POS_INCREASE>(std::get<PARAM_CMD_SEQ>(GetParam()));
+        auto runStreamIoCommands = [&](const AudioPortConfig& portConfig) {
+            if (!std::get<PARAM_SETUP_SEQ>(GetParam())) {
+                ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq1(portConfig, commandsAndStates,
+                                                                    validatePositionIncrease));
+            } else {
+                ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq2(portConfig, commandsAndStates,
+                                                                    validatePositionIncrease));
+            }
+        };
+
         for (const auto& portConfig : allPortConfigs) {
             auto port = moduleConfig->getPort(portConfig.portId);
             ASSERT_TRUE(port.has_value());
@@ -4075,16 +4100,18 @@
             delayTransientStates.flags().streamTransientStateDelayMs =
                     std::get<NAMED_CMD_DELAY_MS>(std::get<PARAM_CMD_SEQ>(GetParam()));
             ASSERT_NO_FATAL_FAILURE(delayTransientStates.SetUp(module.get()));
-            const auto& commandsAndStates =
-                    std::get<NAMED_CMD_CMDS>(std::get<PARAM_CMD_SEQ>(GetParam()));
-            const bool validatePositionIncrease =
-                    std::get<NAMED_CMD_VALIDATE_POS_INCREASE>(std::get<PARAM_CMD_SEQ>(GetParam()));
-            if (!std::get<PARAM_SETUP_SEQ>(GetParam())) {
-                ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq1(portConfig, commandsAndStates,
-                                                                    validatePositionIncrease));
-            } else {
-                ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq2(portConfig, commandsAndStates,
-                                                                    validatePositionIncrease));
+            ASSERT_NO_FATAL_FAILURE(runStreamIoCommands(portConfig));
+            if (aidlVersion >= kAidlVersion3 && isNonBlocking && !IOTraits<Stream>::is_input) {
+                // Also try running the same sequence with "aosp.forceDrainToDraining" set.
+                // This will only work with the default implementation. When it works, the stream
+                // tries always to move to the 'DRAINING' state after an "early notify" drain.
+                // This helps to check more paths for our test scenarios.
+                WithModuleParameter forceDrainToDraining("aosp.forceDrainToDraining",
+                                                         Boolean{true});
+                if (forceDrainToDraining.SetUpNoChecks(module.get(), true /*failureExpected*/)
+                            .isOk()) {
+                    ASSERT_NO_FATAL_FAILURE(runStreamIoCommands(portConfig));
+                }
             }
             if (isNonBlocking) {
                 // Also try running the same sequence with "aosp.forceTransientBurst" set.
@@ -4094,13 +4121,7 @@
                 WithModuleParameter forceTransientBurst("aosp.forceTransientBurst", Boolean{true});
                 if (forceTransientBurst.SetUpNoChecks(module.get(), true /*failureExpected*/)
                             .isOk()) {
-                    if (!std::get<PARAM_SETUP_SEQ>(GetParam())) {
-                        ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq1(
-                                portConfig, commandsAndStates, validatePositionIncrease));
-                    } else {
-                        ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq2(
-                                portConfig, commandsAndStates, validatePositionIncrease));
-                    }
+                    ASSERT_NO_FATAL_FAILURE(runStreamIoCommands(portConfig));
                 }
             } else if (!IOTraits<Stream>::is_input) {
                 // Also try running the same sequence with "aosp.forceSynchronousDrain" set.
@@ -4111,13 +4132,7 @@
                                                           Boolean{true});
                 if (forceSynchronousDrain.SetUpNoChecks(module.get(), true /*failureExpected*/)
                             .isOk()) {
-                    if (!std::get<PARAM_SETUP_SEQ>(GetParam())) {
-                        ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq1(
-                                portConfig, commandsAndStates, validatePositionIncrease));
-                    } else {
-                        ASSERT_NO_FATAL_FAILURE(RunStreamIoCommandsImplSeq2(
-                                portConfig, commandsAndStates, validatePositionIncrease));
-                    }
+                    ASSERT_NO_FATAL_FAILURE(runStreamIoCommands(portConfig));
                 }
             }
         }
@@ -4570,14 +4585,14 @@
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
 static const NamedCommandSequence kReadSeq =
-        std::make_tuple(std::string("Read"), 0, StreamTypeFilter::ANY, makeBurstCommands(true),
-                        true /*validatePositionIncrease*/);
+        std::make_tuple(std::string("Read"), kAidlVersion1, 0, StreamTypeFilter::ANY,
+                        makeBurstCommands(true), true /*validatePositionIncrease*/);
 static const NamedCommandSequence kWriteSyncSeq =
-        std::make_tuple(std::string("Write"), 0, StreamTypeFilter::SYNC, makeBurstCommands(true),
-                        true /*validatePositionIncrease*/);
+        std::make_tuple(std::string("Write"), kAidlVersion1, 0, StreamTypeFilter::SYNC,
+                        makeBurstCommands(true), true /*validatePositionIncrease*/);
 static const NamedCommandSequence kWriteAsyncSeq =
-        std::make_tuple(std::string("Write"), 0, StreamTypeFilter::ASYNC, makeBurstCommands(false),
-                        true /*validatePositionIncrease*/);
+        std::make_tuple(std::string("Write"), kAidlVersion1, 0, StreamTypeFilter::ASYNC,
+                        makeBurstCommands(false), true /*validatePositionIncrease*/);
 
 std::shared_ptr<StateSequence> makeAsyncDrainCommands(bool isInput) {
     using State = StreamDescriptor::State;
@@ -4606,10 +4621,10 @@
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
 static const NamedCommandSequence kWriteDrainAsyncSeq = std::make_tuple(
-        std::string("WriteDrain"), kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
-        makeAsyncDrainCommands(false), false /*validatePositionIncrease*/);
+        std::string("WriteDrain"), kAidlVersion1, kStreamTransientStateTransitionDelayMs,
+        StreamTypeFilter::ASYNC, makeAsyncDrainCommands(false), false /*validatePositionIncrease*/);
 static const NamedCommandSequence kDrainInSeq =
-        std::make_tuple(std::string("Drain"), 0, StreamTypeFilter::ANY,
+        std::make_tuple(std::string("Drain"), kAidlVersion1, 0, StreamTypeFilter::ANY,
                         makeAsyncDrainCommands(true), false /*validatePositionIncrease*/);
 
 std::shared_ptr<StateSequence> makeDrainOutCommands(bool isSync) {
@@ -4631,12 +4646,28 @@
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
 static const NamedCommandSequence kDrainOutSyncSeq =
-        std::make_tuple(std::string("Drain"), 0, StreamTypeFilter::SYNC, makeDrainOutCommands(true),
-                        false /*validatePositionIncrease*/);
+        std::make_tuple(std::string("Drain"), kAidlVersion1, 0, StreamTypeFilter::SYNC,
+                        makeDrainOutCommands(true), false /*validatePositionIncrease*/);
 static const NamedCommandSequence kDrainOutAsyncSeq =
-        std::make_tuple(std::string("Drain"), 0, StreamTypeFilter::ASYNC,
+        std::make_tuple(std::string("Drain"), kAidlVersion3, 0, StreamTypeFilter::ASYNC,
                         makeDrainOutCommands(false), false /*validatePositionIncrease*/);
 
+std::shared_ptr<StateSequence> makeDrainEarlyOutCommands() {
+    using State = StreamDescriptor::State;
+    auto d = std::make_unique<StateDag>();
+    StateDag::Node last = d->makeFinalNode(State::IDLE);
+    StateDag::Node draining = d->makeNode(State::DRAINING, kDrainReadyEvent, last);
+    draining.children().push_back(d->makeNode(State::DRAINING, kGetStatusCommand, last));
+    StateDag::Node active = d->makeNode(State::ACTIVE, kDrainOutEarlyCommand, draining);
+    StateDag::Node idle = d->makeNode(State::IDLE, kBurstCommand, active);
+    idle.children().push_back(d->makeNode(State::TRANSFERRING, kTransferReadyEvent, active));
+    d->makeNode(State::STANDBY, kStartCommand, idle);
+    return std::make_shared<StateSequenceFollower>(std::move(d));
+}
+static const NamedCommandSequence kDrainEarlyOutAsyncSeq =
+        std::make_tuple(std::string("DrainEarly"), kAidlVersion3, 0, StreamTypeFilter::ASYNC,
+                        makeDrainEarlyOutCommands(), false /*validatePositionIncrease*/);
+
 std::shared_ptr<StateSequence> makeDrainPauseOutCommands(bool isSync) {
     using State = StreamDescriptor::State;
     auto d = std::make_unique<StateDag>();
@@ -4656,12 +4687,33 @@
     d->makeNode(State::STANDBY, kStartCommand, idle);
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
-static const NamedCommandSequence kDrainPauseOutSyncSeq = std::make_tuple(
-        std::string("DrainPause"), kStreamTransientStateTransitionDelayMs, StreamTypeFilter::SYNC,
-        makeDrainPauseOutCommands(true), false /*validatePositionIncrease*/);
-static const NamedCommandSequence kDrainPauseOutAsyncSeq = std::make_tuple(
-        std::string("DrainPause"), kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
-        makeDrainPauseOutCommands(false), false /*validatePositionIncrease*/);
+static const NamedCommandSequence kDrainPauseOutSyncSeq =
+        std::make_tuple(std::string("DrainPause"), kAidlVersion1,
+                        kStreamTransientStateTransitionDelayMs, StreamTypeFilter::SYNC,
+                        makeDrainPauseOutCommands(true), false /*validatePositionIncrease*/);
+static const NamedCommandSequence kDrainPauseOutAsyncSeq =
+        std::make_tuple(std::string("DrainPause"), kAidlVersion1,
+                        kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
+                        makeDrainPauseOutCommands(false), false /*validatePositionIncrease*/);
+
+std::shared_ptr<StateSequence> makeDrainEarlyPauseOutCommands() {
+    using State = StreamDescriptor::State;
+    auto d = std::make_unique<StateDag>();
+    StateDag::Node draining = d->makeNodes({std::make_pair(State::DRAINING, kPauseCommand),
+                                            std::make_pair(State::DRAIN_PAUSED, kStartCommand),
+                                            std::make_pair(State::DRAINING, kPauseCommand),
+                                            std::make_pair(State::DRAIN_PAUSED, kBurstCommand)},
+                                           State::TRANSFER_PAUSED);
+    StateDag::Node active = d->makeNode(State::ACTIVE, kDrainOutEarlyCommand, draining);
+    StateDag::Node idle = d->makeNode(State::IDLE, kBurstCommand, active);
+    idle.children().push_back(d->makeNode(State::TRANSFERRING, kDrainOutEarlyCommand, draining));
+    d->makeNode(State::STANDBY, kStartCommand, idle);
+    return std::make_shared<StateSequenceFollower>(std::move(d));
+}
+static const NamedCommandSequence kDrainEarlyPauseOutAsyncSeq =
+        std::make_tuple(std::string("DrainEarlyPause"), kAidlVersion3,
+                        kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
+                        makeDrainEarlyPauseOutCommands(), false /*validatePositionIncrease*/);
 
 // This sequence also verifies that the capture / presentation position is not reset on standby.
 std::shared_ptr<StateSequence> makeStandbyCommands(bool isInput, bool isSync) {
@@ -4703,14 +4755,15 @@
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
 static const NamedCommandSequence kStandbyInSeq =
-        std::make_tuple(std::string("Standby"), 0, StreamTypeFilter::ANY,
+        std::make_tuple(std::string("Standby"), kAidlVersion1, 0, StreamTypeFilter::ANY,
                         makeStandbyCommands(true, false), false /*validatePositionIncrease*/);
 static const NamedCommandSequence kStandbyOutSyncSeq =
-        std::make_tuple(std::string("Standby"), 0, StreamTypeFilter::SYNC,
+        std::make_tuple(std::string("Standby"), kAidlVersion1, 0, StreamTypeFilter::SYNC,
                         makeStandbyCommands(false, true), false /*validatePositionIncrease*/);
-static const NamedCommandSequence kStandbyOutAsyncSeq = std::make_tuple(
-        std::string("Standby"), kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
-        makeStandbyCommands(false, false), false /*validatePositionIncrease*/);
+static const NamedCommandSequence kStandbyOutAsyncSeq =
+        std::make_tuple(std::string("Standby"), kAidlVersion1,
+                        kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
+                        makeStandbyCommands(false, false), false /*validatePositionIncrease*/);
 
 std::shared_ptr<StateSequence> makePauseCommands(bool isInput, bool isSync) {
     using State = StreamDescriptor::State;
@@ -4745,14 +4798,15 @@
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
 static const NamedCommandSequence kPauseInSeq =
-        std::make_tuple(std::string("Pause"), 0, StreamTypeFilter::ANY,
+        std::make_tuple(std::string("Pause"), kAidlVersion1, 0, StreamTypeFilter::ANY,
                         makePauseCommands(true, false), false /*validatePositionIncrease*/);
 static const NamedCommandSequence kPauseOutSyncSeq =
-        std::make_tuple(std::string("Pause"), 0, StreamTypeFilter::SYNC,
+        std::make_tuple(std::string("Pause"), kAidlVersion1, 0, StreamTypeFilter::SYNC,
                         makePauseCommands(false, true), false /*validatePositionIncrease*/);
-static const NamedCommandSequence kPauseOutAsyncSeq = std::make_tuple(
-        std::string("Pause"), kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
-        makePauseCommands(false, false), false /*validatePositionIncrease*/);
+static const NamedCommandSequence kPauseOutAsyncSeq =
+        std::make_tuple(std::string("Pause"), kAidlVersion1, kStreamTransientStateTransitionDelayMs,
+                        StreamTypeFilter::ASYNC, makePauseCommands(false, false),
+                        false /*validatePositionIncrease*/);
 
 std::shared_ptr<StateSequence> makeFlushCommands(bool isInput, bool isSync) {
     using State = StreamDescriptor::State;
@@ -4780,14 +4834,15 @@
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
 static const NamedCommandSequence kFlushInSeq =
-        std::make_tuple(std::string("Flush"), 0, StreamTypeFilter::ANY,
+        std::make_tuple(std::string("Flush"), kAidlVersion1, 0, StreamTypeFilter::ANY,
                         makeFlushCommands(true, false), false /*validatePositionIncrease*/);
 static const NamedCommandSequence kFlushOutSyncSeq =
-        std::make_tuple(std::string("Flush"), 0, StreamTypeFilter::SYNC,
+        std::make_tuple(std::string("Flush"), kAidlVersion1, 0, StreamTypeFilter::SYNC,
                         makeFlushCommands(false, true), false /*validatePositionIncrease*/);
-static const NamedCommandSequence kFlushOutAsyncSeq = std::make_tuple(
-        std::string("Flush"), kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
-        makeFlushCommands(false, false), false /*validatePositionIncrease*/);
+static const NamedCommandSequence kFlushOutAsyncSeq =
+        std::make_tuple(std::string("Flush"), kAidlVersion1, kStreamTransientStateTransitionDelayMs,
+                        StreamTypeFilter::ASYNC, makeFlushCommands(false, false),
+                        false /*validatePositionIncrease*/);
 
 std::shared_ptr<StateSequence> makeDrainPauseFlushOutCommands(bool isSync) {
     using State = StreamDescriptor::State;
@@ -4807,13 +4862,13 @@
     return std::make_shared<StateSequenceFollower>(std::move(d));
 }
 static const NamedCommandSequence kDrainPauseFlushOutSyncSeq =
-        std::make_tuple(std::string("DrainPauseFlush"), kStreamTransientStateTransitionDelayMs,
-                        StreamTypeFilter::SYNC, makeDrainPauseFlushOutCommands(true),
-                        false /*validatePositionIncrease*/);
+        std::make_tuple(std::string("DrainPauseFlush"), kAidlVersion1,
+                        kStreamTransientStateTransitionDelayMs, StreamTypeFilter::SYNC,
+                        makeDrainPauseFlushOutCommands(true), false /*validatePositionIncrease*/);
 static const NamedCommandSequence kDrainPauseFlushOutAsyncSeq =
-        std::make_tuple(std::string("DrainPauseFlush"), kStreamTransientStateTransitionDelayMs,
-                        StreamTypeFilter::ASYNC, makeDrainPauseFlushOutCommands(false),
-                        false /*validatePositionIncrease*/);
+        std::make_tuple(std::string("DrainPauseFlush"), kAidlVersion1,
+                        kStreamTransientStateTransitionDelayMs, StreamTypeFilter::ASYNC,
+                        makeDrainPauseFlushOutCommands(false), false /*validatePositionIncrease*/);
 
 // Note, this isn't the "official" enum printer, it is only used to make the test name suffix.
 std::string PrintStreamFilterToString(StreamTypeFilter filter) {
@@ -4851,9 +4906,10 @@
         AudioStreamIoOutTest, AudioStreamIoOut,
         testing::Combine(testing::ValuesIn(android::getAidlHalInstanceNames(IModule::descriptor)),
                          testing::Values(kWriteSyncSeq, kWriteAsyncSeq, kWriteDrainAsyncSeq,
-                                         kDrainOutSyncSeq, kDrainPauseOutSyncSeq,
-                                         kDrainPauseOutAsyncSeq, kStandbyOutSyncSeq,
-                                         kStandbyOutAsyncSeq,
+                                         kDrainOutSyncSeq, kDrainOutAsyncSeq,
+                                         kDrainEarlyOutAsyncSeq, kDrainPauseOutSyncSeq,
+                                         kDrainPauseOutAsyncSeq, kDrainEarlyPauseOutAsyncSeq,
+                                         kStandbyOutSyncSeq, kStandbyOutAsyncSeq,
                                          kPauseOutSyncSeq,  // kPauseOutAsyncSeq,
                                          kFlushOutSyncSeq, kFlushOutAsyncSeq,
                                          kDrainPauseFlushOutSyncSeq, kDrainPauseFlushOutAsyncSeq),
diff --git a/nfc/aidl/aidl_api/android.hardware.nfc/current/android/hardware/nfc/ProtocolDiscoveryConfig.aidl b/nfc/aidl/aidl_api/android.hardware.nfc/current/android/hardware/nfc/ProtocolDiscoveryConfig.aidl
index 021dfe2..2df0d35 100644
--- a/nfc/aidl/aidl_api/android.hardware.nfc/current/android/hardware/nfc/ProtocolDiscoveryConfig.aidl
+++ b/nfc/aidl/aidl_api/android.hardware.nfc/current/android/hardware/nfc/ProtocolDiscoveryConfig.aidl
@@ -43,4 +43,5 @@
   byte discoveryPollKovio;
   byte discoveryPollBPrime;
   byte discoveryListenBPrime;
+  byte protocolChineseId;
 }
diff --git a/nfc/aidl/android/hardware/nfc/ProtocolDiscoveryConfig.aidl b/nfc/aidl/android/hardware/nfc/ProtocolDiscoveryConfig.aidl
index f8e3228..021e307 100644
--- a/nfc/aidl/android/hardware/nfc/ProtocolDiscoveryConfig.aidl
+++ b/nfc/aidl/android/hardware/nfc/ProtocolDiscoveryConfig.aidl
@@ -33,4 +33,5 @@
     byte discoveryPollKovio;
     byte discoveryPollBPrime;
     byte discoveryListenBPrime;
+    byte protocolChineseId;
 }
diff --git a/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl b/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl
index 294c205..da8b513 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl
@@ -145,9 +145,9 @@
      *     verifiedBootKey            OCTET_STRING,
      *     deviceLocked               BOOLEAN,
      *     verifiedBootState          VerifiedBootState,
-     *     # verifiedBootHash must contain 32-byte value that represents the state of all binaries
-     *     # or other components validated by verified boot.  Updating any verified binary or
-     *     # component must cause this value to change.
+     *     # verifiedBootHash must contain a SHA-256 digest of all binaries and components validated
+     *     # by Verified Boot. Updating any verified binary or component must cause this value to
+     *     # change.
      *     verifiedBootHash           OCTET_STRING,
      * }
      *
diff --git a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
index 48b12a4..51afa12 100644
--- a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
@@ -149,7 +149,7 @@
     // The multiplier should never be higher than the AIDL version, but can be less
     // (for example, if the implementation is from an earlier version but the HAL service
     // uses the default libraries and so reports the current AIDL version).
-    EXPECT_TRUE((attestation_version / 100) <= aidl_version);
+    EXPECT_LE((attestation_version / 100), aidl_version);
 }
 
 bool avb_verification_enabled() {
@@ -1142,13 +1142,12 @@
                 int openssl_padding = RSA_NO_PADDING;
                 switch (padding) {
                     case PaddingMode::NONE:
-                        ASSERT_TRUE(data_size <= key_len);
+                        ASSERT_LE(data_size, key_len);
                         ASSERT_EQ(key_len, signature.size());
                         openssl_padding = RSA_NO_PADDING;
                         break;
                     case PaddingMode::RSA_PKCS1_1_5_SIGN:
-                        ASSERT_TRUE(data_size + kPkcs1UndigestedSignaturePaddingOverhead <=
-                                    key_len);
+                        ASSERT_LE(data_size + kPkcs1UndigestedSignaturePaddingOverhead, key_len);
                         openssl_padding = RSA_PKCS1_PADDING;
                         break;
                     default:
@@ -1905,7 +1904,7 @@
         }
     }
 
-    // Verified boot key should be all 0's if the boot state is not verified or self signed
+    // Verified Boot key should be all zeroes if the boot state is "orange".
     std::string empty_boot_key(32, '\0');
     std::string verified_boot_key_str((const char*)verified_boot_key.data(),
                                       verified_boot_key.size());
@@ -2364,7 +2363,7 @@
         // ATTESTATION_IDS_NOT_PROVISIONED in this case.
         ASSERT_TRUE((tag == TAG_ATTESTATION_ID_IMEI || tag == TAG_ATTESTATION_ID_MEID ||
                      tag == TAG_ATTESTATION_ID_SECOND_IMEI))
-                << "incorrect error code on attestation ID mismatch";
+                << "incorrect error code on attestation ID mismatch for " << tag;
     } else {
         ADD_FAILURE() << "Error code " << result
                       << " returned on attestation ID mismatch, should be CANNOT_ATTEST_IDS";
diff --git a/security/keymint/aidl/vts/functional/KeyMintTest.cpp b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
index e32c2db..067db78 100644
--- a/security/keymint/aidl/vts/functional/KeyMintTest.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
@@ -2584,7 +2584,8 @@
     auto result = GenerateKey(
             AuthorizationSetBuilder().EcdsaKey(256).Digest(Digest::NONE).SetDefaultValidity());
     ASSERT_TRUE(result == ErrorCode::UNSUPPORTED_KEY_SIZE ||
-                result == ErrorCode::UNSUPPORTED_EC_CURVE);
+                result == ErrorCode::UNSUPPORTED_EC_CURVE)
+            << "unexpected result " << result;
 }
 
 /*
@@ -2605,7 +2606,7 @@
                                       .SigningKey()
                                       .Digest(Digest::NONE)
                                       .SetDefaultValidity());
-    ASSERT_TRUE(result == ErrorCode::INVALID_ARGUMENT);
+    ASSERT_EQ(result, ErrorCode::INVALID_ARGUMENT);
 }
 
 /*
@@ -3184,7 +3185,8 @@
     string result;
     ErrorCode finish_error_code = Finish(message, &result);
     EXPECT_TRUE(finish_error_code == ErrorCode::INVALID_INPUT_LENGTH ||
-                finish_error_code == ErrorCode::INVALID_ARGUMENT);
+                finish_error_code == ErrorCode::INVALID_ARGUMENT)
+            << "unexpected error code " << finish_error_code;
 
     // Very large message that should exceed the transfer buffer size of any reasonable TEE.
     message = string(128 * 1024, 'a');
@@ -3194,7 +3196,8 @@
                                               .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
     finish_error_code = Finish(message, &result);
     EXPECT_TRUE(finish_error_code == ErrorCode::INVALID_INPUT_LENGTH ||
-                finish_error_code == ErrorCode::INVALID_ARGUMENT);
+                finish_error_code == ErrorCode::INVALID_ARGUMENT)
+            << "unexpected error code " << finish_error_code;
 }
 
 /*
@@ -3248,7 +3251,8 @@
                                                   .Digest(Digest::NONE)
                                                   .Digest(Digest::SHA1)
                                                   .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN));
-    ASSERT_TRUE(result == ErrorCode::UNSUPPORTED_DIGEST || result == ErrorCode::INVALID_ARGUMENT);
+    ASSERT_TRUE(result == ErrorCode::UNSUPPORTED_DIGEST || result == ErrorCode::INVALID_ARGUMENT)
+            << "unexpected result " << result;
 
     ASSERT_EQ(ErrorCode::UNSUPPORTED_DIGEST,
               Begin(KeyPurpose::SIGN,
@@ -3421,7 +3425,8 @@
         }
 
         auto rc = DeleteKey();
-        ASSERT_TRUE(rc == ErrorCode::OK || rc == ErrorCode::UNIMPLEMENTED);
+        ASSERT_TRUE(rc == ErrorCode::OK || rc == ErrorCode::UNIMPLEMENTED)
+                << "unexpected result " << rc;
     }
 }
 
@@ -5705,7 +5710,8 @@
     // is checked against those values, and found absent.
     auto result = Begin(KeyPurpose::DECRYPT, params);
     EXPECT_TRUE(result == ErrorCode::UNSUPPORTED_MGF_DIGEST ||
-                result == ErrorCode::INCOMPATIBLE_MGF_DIGEST);
+                result == ErrorCode::INCOMPATIBLE_MGF_DIGEST)
+            << "unexpected result " << result;
 }
 
 /*
@@ -5970,14 +5976,16 @@
                                                      .BlockMode(BlockMode::ECB)
                                                      .Padding(PaddingMode::NONE));
     EXPECT_TRUE(result == ErrorCode::INCOMPATIBLE_BLOCK_MODE ||
-                result == ErrorCode::UNSUPPORTED_BLOCK_MODE);
+                result == ErrorCode::UNSUPPORTED_BLOCK_MODE)
+            << "unexpected result " << result;
 
     result = Begin(KeyPurpose::ENCRYPT, AuthorizationSetBuilder()
                                                 .BlockMode(BlockMode::ECB)
                                                 .Padding(PaddingMode::NONE)
                                                 .Padding(PaddingMode::PKCS7));
     EXPECT_TRUE(result == ErrorCode::INCOMPATIBLE_PADDING_MODE ||
-                result == ErrorCode::UNSUPPORTED_PADDING_MODE);
+                result == ErrorCode::UNSUPPORTED_PADDING_MODE)
+            << "unexpected result " << result;
 }
 
 /*
@@ -8760,7 +8768,8 @@
 // Re-enable and run at your own risk.
 TEST_P(DestroyAttestationIdsTest, DISABLED_DestroyTest) {
     auto result = DestroyAttestationIds();
-    EXPECT_TRUE(result == ErrorCode::OK || result == ErrorCode::UNIMPLEMENTED);
+    EXPECT_TRUE(result == ErrorCode::OK || result == ErrorCode::UNIMPLEMENTED)
+            << "unexpected result " << result;
 }
 
 INSTANTIATE_KEYMINT_AIDL_TEST(DestroyAttestationIdsTest);
diff --git a/staging/security/see/Android.bp b/staging/security/see/Android.bp
new file mode 100644
index 0000000..a83b65d
--- /dev/null
+++ b/staging/security/see/Android.bp
@@ -0,0 +1,5 @@
+dirgroup {
+    name: "trusty_dirgroup_hardware_interfaces_staging_security_see",
+    dirs: ["."],
+    visibility: ["//trusty/vendor/google/aosp/scripts"],
+}
diff --git a/staging/security/see/hwcrypto/aidl/Android.bp b/staging/security/see/hwcrypto/aidl/Android.bp
index 0a7e8be..2da59a4 100644
--- a/staging/security/see/hwcrypto/aidl/Android.bp
+++ b/staging/security/see/hwcrypto/aidl/Android.bp
@@ -28,4 +28,5 @@
             enabled: true,
         },
     },
+    frozen: false,
 }
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl
index 6837a2f..5b34572 100644
--- a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl
@@ -40,10 +40,14 @@
   android.hardware.security.see.hwcrypto.IOpaqueKey importClearKey(in android.hardware.security.see.hwcrypto.types.ExplicitKeyMaterial keyMaterial, in android.hardware.security.see.hwcrypto.KeyPolicy newKeyPolicy);
   byte[] getCurrentDicePolicy();
   android.hardware.security.see.hwcrypto.IOpaqueKey keyTokenImport(in android.hardware.security.see.hwcrypto.types.OpaqueKeyToken requestedKey, in byte[] sealingDicePolicy);
+  android.hardware.security.see.hwcrypto.IOpaqueKey getKeyslotData(android.hardware.security.see.hwcrypto.IHwCryptoKey.KeySlot slotId);
   enum DeviceKeyId {
     DEVICE_BOUND_KEY,
     BATCH_KEY,
   }
+  enum KeySlot {
+    KEYMINT_SHARED_HMAC_KEY,
+  }
   union DiceBoundDerivationKey {
     android.hardware.security.see.hwcrypto.IOpaqueKey opaqueKey;
     android.hardware.security.see.hwcrypto.IHwCryptoKey.DeviceKeyId keyId;
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl
index c74e71f..88dbdf1 100644
--- a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl
@@ -37,4 +37,5 @@
   android.hardware.security.see.hwcrypto.KeyPolicy getKeyPolicy();
   byte[] getPublicKey();
   android.hardware.security.see.hwcrypto.types.OpaqueKeyToken getShareableToken(in byte[] sealingDicePolicy);
+  void setProtectionId(in android.hardware.security.see.hwcrypto.types.ProtectionId protectionId, in android.hardware.security.see.hwcrypto.types.OperationType[] allowedOperations);
 }
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/OperationParameters.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/OperationParameters.aidl
index 017e51c..e069610 100644
--- a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/OperationParameters.aidl
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/OperationParameters.aidl
@@ -35,4 +35,5 @@
 union OperationParameters {
   android.hardware.security.see.hwcrypto.types.SymmetricAuthOperationParameters symmetricAuthCrypto;
   android.hardware.security.see.hwcrypto.types.SymmetricOperationParameters symmetricCrypto;
+  android.hardware.security.see.hwcrypto.types.HmacOperationParameters hmac;
 }
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl
index 933fb67..9970678 100644
--- a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl
@@ -34,4 +34,5 @@
 package android.hardware.security.see.hwcrypto.types;
 union ExplicitKeyMaterial {
   android.hardware.security.see.hwcrypto.types.AesKey aes;
+  android.hardware.security.see.hwcrypto.types.HmacKey hmac;
 }
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl
index cd8b3c6..742314c 100644
--- a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl
@@ -41,4 +41,5 @@
   const int ALLOCATION_ERROR = (-5) /* -5 */;
   const int INVALID_KEY = (-6) /* -6 */;
   const int BAD_PARAMETER = (-7) /* -7 */;
+  const int UNAUTHORIZED = (-8) /* -8 */;
 }
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HmacKey.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HmacKey.aidl
new file mode 100644
index 0000000..f8de94a
--- /dev/null
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HmacKey.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.security.see.hwcrypto.types;
+union HmacKey {
+  byte[32] sha256 = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+  byte[64] sha512;
+}
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HmacOperationParameters.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HmacOperationParameters.aidl
new file mode 100644
index 0000000..532cd8d
--- /dev/null
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/HmacOperationParameters.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.security.see.hwcrypto.types;
+parcelable HmacOperationParameters {
+  android.hardware.security.see.hwcrypto.IOpaqueKey key;
+}
diff --git a/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/ProtectionId.aidl b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/ProtectionId.aidl
new file mode 100644
index 0000000..1e304ab
--- /dev/null
+++ b/staging/security/see/hwcrypto/aidl/aidl_api/android.hardware.security.see/current/android/hardware/security/see/hwcrypto/types/ProtectionId.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.security.see.hwcrypto.types;
+enum ProtectionId {
+  WIDEVINE_OUTPUT_BUFFER = 1,
+}
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl
index e472f4c..bb194a3 100644
--- a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IHwCryptoKey.aidl
@@ -37,6 +37,19 @@
         DEVICE_BOUND_KEY,
         BATCH_KEY,
     }
+
+    /*
+     * Identifier for the requested key slot. The currently supported identifiers are:
+     *
+     * KEYMINT_SHARED_HMAC_KEY:
+     *      This is the shared HMAC key that will now be computed by HwCryptoKey after participating
+     *      in the ISharedSecret protocol that can be shared with KeyMint and authenticators. See
+     *      ISharedSecret.aidl for more information.
+     */
+    enum KeySlot {
+        KEYMINT_SHARED_HMAC_KEY,
+    }
+
     union DiceBoundDerivationKey {
         /*
          * Opaque to be used to derive the DICE bound key.
@@ -256,4 +269,21 @@
      *      success, service specific error based on <code>HalErrorCode</code> otherwise.
      */
     IOpaqueKey keyTokenImport(in OpaqueKeyToken requestedKey, in byte[] sealingDicePolicy);
+
+    /*
+     * getKeyslotData() - Gets the keyslot key material referenced by slotId.
+     *
+     * @slotId:
+     *      Identifier for the requested keyslot
+     *
+     * This interface is used to access device specific keys with known types and uses. Because the
+     * returned key is opaque, it can only be used through the different HwCrypto interfaces.
+     * Because the keys live in a global namespace the identity of the caller needs to be
+     * checked to verify that it has permission to accesses the requested key.
+     *
+     * Return:
+     *      Ok(IOpaqueKey) on success, UNAUTHORIZED if the caller cannot access the requested key,
+     *      another specific error code otherwise.
+     */
+    IOpaqueKey getKeyslotData(KeySlot slotId);
 }
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl
index eba4d1c..9a72639 100644
--- a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/IOpaqueKey.aidl
@@ -18,6 +18,7 @@
 import android.hardware.security.see.hwcrypto.KeyPolicy;
 import android.hardware.security.see.hwcrypto.types.OpaqueKeyToken;
 import android.hardware.security.see.hwcrypto.types.OperationType;
+import android.hardware.security.see.hwcrypto.types.ProtectionId;
 
 interface IOpaqueKey {
     /*
@@ -65,4 +66,25 @@
      *      <code>HalErrorCode</code> otherwise.
      */
     OpaqueKeyToken getShareableToken(in byte[] sealingDicePolicy);
+
+    /*
+     * setProtectionId() - Sets the protectionID associated with the buffers where the operation
+     *                     will be performed. A protection ID serves as a limitation on the key so
+     *                     it can only operate on buffers with a matching protection ID.
+     *                     The client calling this functions needs to have the necessary permissions
+     *                     to read and/or write to this buffer. Setting this parameter means that
+     *                     if the key is shared with a different client, the client receiving the
+     *                     key will be limited in which buffers can be used to read/write data for
+     *                     this operation.
+     *
+     * @protectionId:
+     *      ID of the given use case to provide protection for. The method of protecting the buffer
+     *      will be platform dependent.
+     * @allowedOperations:
+     *      array of allowed operations. Allowed operations are either READ or WRITE.
+     *
+     * Return:
+     *      service specific error based on <code>HalErrorCode</code> on failure.
+     */
+    void setProtectionId(in ProtectionId protectionId, in OperationType[] allowedOperations);
 }
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/OperationParameters.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/OperationParameters.aidl
index 9e2fc6c..a977f56 100644
--- a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/OperationParameters.aidl
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/OperationParameters.aidl
@@ -15,6 +15,7 @@
  */
 package android.hardware.security.see.hwcrypto;
 
+import android.hardware.security.see.hwcrypto.types.HmacOperationParameters;
 import android.hardware.security.see.hwcrypto.types.SymmetricAuthOperationParameters;
 import android.hardware.security.see.hwcrypto.types.SymmetricOperationParameters;
 
@@ -31,4 +32,9 @@
      * Parameters for non-authenticated symmetric cryptography (AES/TDES).
      */
     SymmetricOperationParameters symmetricCrypto;
+
+    /*
+     * Parameters for hash based message authenticated code operations.
+     */
+    HmacOperationParameters hmac;
 }
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl
index 4298ba9..3aa5611 100644
--- a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/ExplicitKeyMaterial.aidl
@@ -16,10 +16,12 @@
 package android.hardware.security.see.hwcrypto.types;
 
 import android.hardware.security.see.hwcrypto.types.AesKey;
+import android.hardware.security.see.hwcrypto.types.HmacKey;
 
 /*
  * Type encapsulating a clear key.
  */
 union ExplicitKeyMaterial {
     AesKey aes;
+    HmacKey hmac;
 }
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl
index e8e8539..f536c0e 100644
--- a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HalErrorCode.aidl
@@ -42,4 +42,7 @@
 
     /* Bad parameter supplied for the desired operation */
     const int BAD_PARAMETER = -7;
+
+    /* Caller is not authorized to make this call */
+    const int UNAUTHORIZED = -8;
 }
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HmacKey.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HmacKey.aidl
new file mode 100644
index 0000000..a0b6ba7
--- /dev/null
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HmacKey.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.security.see.hwcrypto.types;
+
+/*
+ * Type that represents an Hmac key.
+ */
+union HmacKey {
+    /*
+     * Raw Hmac key for use with sha256.
+     */
+    byte[32] sha256 = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+            0, 0, 0, 0, 0, 0};
+
+    /*
+     * Raw Hmac key for use with sha512.
+     */
+    byte[64] sha512;
+}
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HmacOperationParameters.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HmacOperationParameters.aidl
new file mode 100644
index 0000000..da09a2c
--- /dev/null
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/HmacOperationParameters.aidl
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.security.see.hwcrypto.types;
+
+import android.hardware.security.see.hwcrypto.IOpaqueKey;
+/*
+ * Data needed to perform HMAC operations.
+ */
+parcelable HmacOperationParameters {
+    /*
+     * Key to be used for the HMAC operation.
+     */
+    IOpaqueKey key;
+}
diff --git a/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/ProtectionId.aidl b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/ProtectionId.aidl
new file mode 100644
index 0000000..8686882
--- /dev/null
+++ b/staging/security/see/hwcrypto/aidl/android/hardware/security/see/hwcrypto/types/ProtectionId.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.security.see.hwcrypto.types;
+
+/*
+ * Enum describing the different types of protected buffers. Protected buffers are named by its
+ * corresponding use case and its underlaying implementation is platform dependant.
+ */
+enum ProtectionId {
+    /*
+     * ProtectionID used by HwCrypto to enable Keys that can be used for Widevine video buffers.
+     * These buffers should not be readable by non-trusted entities and HwCrypto should not allow
+     * any read access to them through its interface.
+     */
+    WIDEVINE_OUTPUT_BUFFER = 1,
+}
diff --git a/staging/security/see/storage/aidl/android/hardware/security/see/storage/ISecureStorage.aidl b/staging/security/see/storage/aidl/android/hardware/security/see/storage/ISecureStorage.aidl
index 022de9a..1841bf5 100644
--- a/staging/security/see/storage/aidl/android/hardware/security/see/storage/ISecureStorage.aidl
+++ b/staging/security/see/storage/aidl/android/hardware/security/see/storage/ISecureStorage.aidl
@@ -34,6 +34,13 @@
     /**
      * Starts a storage session for a filesystem.
      *
+     * Clients should be prepared for `startSession` and any methods called on the `IStorageSession`
+     * or its sub-interfaces to return `WOULD_BLOCK` (a `binder::Status` with an exception code of
+     * `EX_TRANSACTION_FAILED` and a transaction error code of `android::WOULD_BLOCK`), which
+     * indicates that the requested storage is not currently available. Possible cases that might
+     * cause this return code might be accessing the data partition during boot stages where it
+     * isn't yet mounted or attempting to commit changes while an A/B update is in progress.
+     *
      * @filesystem:
      *     The minimum filesystem properties requested.
      *