diff --git a/TEST_MAPPING b/TEST_MAPPING
index 0e18f48..543acf6 100644
--- a/TEST_MAPPING
+++ b/TEST_MAPPING
@@ -7,7 +7,7 @@
       "name": "vts_treble_vintf_vendor_test"
     },
     {
-      "name": "hidl_implementation_test"
+      "name": "hal_implementation_test"
     }
   ]
 }
diff --git a/audio/6.0/IDevice.hal b/audio/6.0/IDevice.hal
index c2e310c..2026d8f 100644
--- a/audio/6.0/IDevice.hal
+++ b/audio/6.0/IDevice.hal
@@ -149,7 +149,10 @@
                     AudioConfig suggestedConfig);
 
     /**
-     * Returns whether HAL supports audio patches.
+     * Returns whether HAL supports audio patches. Patch represents a connection
+     * between signal source(s) and signal sink(s). If HAL doesn't support
+     * patches natively (in hardware) then audio system will need to establish
+     * them in software.
      *
      * @return supports true if audio patches are supported.
      */
@@ -316,7 +319,9 @@
     close() generates (Result retval);
 
     /**
-     * Applies an audio effect to an audio device.
+     * Applies an audio effect to an audio device. The effect is inserted
+     * according to its insertion preference specified by INSERT_... EffectFlags
+     * in the EffectDescriptor.
      *
      * @param device identifies the sink or source device this effect must be applied to.
      *               "device" is the AudioPortHandle indicated for the device when the audio
diff --git a/audio/common/6.0/types.hal b/audio/common/6.0/types.hal
index 26e8acb..b2806c7 100644
--- a/audio/common/6.0/types.hal
+++ b/audio/common/6.0/types.hal
@@ -91,37 +91,76 @@
 enum AudioStreamType : int32_t {
     // These values must kept in sync with
     //  frameworks/base/media/java/android/media/AudioSystem.java
+    /** Used to identify the default audio stream volume. */
     DEFAULT          = -1,
+    /** Specifies the minimum value for use in checks and loops. */
     MIN              = 0,
+    /** Used to identify the volume of audio streams for phone calls. */
     VOICE_CALL       = 0,
+    /** Used to identify the volume of audio streams for system sounds. */
     SYSTEM           = 1,
+    /**
+     * Used to identify the volume of audio streams for the phone ring
+     * and message alerts.
+     */
     RING             = 2,
+    /** Used to identify the volume of audio streams for music playback. */
     MUSIC            = 3,
+    /** Used to identify the volume of audio streams for alarms. */
     ALARM            = 4,
+    /** Used to identify the volume of audio streams for notifications. */
     NOTIFICATION     = 5,
+    /**
+     * Used to identify the volume of audio streams for phone calls
+     * when connected on bluetooth.
+     */
     BLUETOOTH_SCO    = 6,
-    ENFORCED_AUDIBLE = 7,  // Sounds that cannot be muted by user and must be
-                           // routed to speaker
+    /**
+     * Used to identify the volume of audio streams for enforced system
+     * sounds in certain countries (e.g camera in Japan). */
+    ENFORCED_AUDIBLE = 7,
+    /** Used to identify the volume of audio streams for DTMF tones. */
     DTMF             = 8,
-    TTS              = 9,  // Transmitted Through Speaker.  Plays over speaker
-                           // only, silent on other devices
-    ACCESSIBILITY    = 10, // For accessibility talk back prompts
-    ASSISTANT        = 11, // For virtual assistant service
+    /**
+     * Used to identify the volume of audio streams exclusively transmitted
+     * through the speaker (TTS) of the device.
+     */
+    TTS              = 9,
+    /**
+     * Used to identify the volume of audio streams for accessibility prompts.
+     */
+    ACCESSIBILITY    = 10,
+    /** Used to identify the volume of audio streams for virtual assistant. */
+    ASSISTANT        = 11,
 };
 
 @export(name="audio_source_t", value_prefix="AUDIO_SOURCE_")
 enum AudioSource : int32_t {
     // These values must kept in sync with
     //  frameworks/base/media/java/android/media/MediaRecorder.java,
-    //  frameworks/av/services/audiopolicy/AudioPolicyService.cpp,
     //  system/media/audio_effects/include/audio_effects/audio_effects_conf.h
+    /** Default audio source. */
     DEFAULT             = 0,
+    /** Microphone audio source. */
     MIC                 = 1,
+    /** Voice call uplink (Tx) audio source. */
     VOICE_UPLINK        = 2,
+    /** Voice call downlink (Rx) audio source. */
     VOICE_DOWNLINK      = 3,
+    /** Voice call uplink + downlink audio source. */
     VOICE_CALL          = 4,
+    /**
+     * Microphone audio source tuned for video recording, with the same
+     * orientation as the camera if available.
+     */
     CAMCORDER           = 5,
+    /** Microphone audio source tuned for voice recognition. */
     VOICE_RECOGNITION   = 6,
+    /**
+     * Microphone audio source tuned for voice communications such as VoIP. It
+     * will for instance take advantage of echo cancellation or automatic gain
+     * control if available.
+     */
     VOICE_COMMUNICATION = 7,
     /**
      * Source for the mix to be presented remotely. An example of remote
@@ -146,7 +185,9 @@
      * to include all post processing applied to the playback path.
      */
     ECHO_REFERENCE      = 1997,
+    /** Virtual source for the built-in FM tuner. */
     FM_TUNER            = 1998,
+    /** Virtual source for the last captured hotword. */
     HOTWORD             = 1999,
 };
 
@@ -562,7 +603,7 @@
     IN_CALL          = 2,
     /** Calls handled by apps (Eg: Hangout). */
     IN_COMMUNICATION = 3,
-    /** Call screening in progress */
+    /** Call screening in progress. */
     CALL_SCREEN      = 4,
 };
 
@@ -748,23 +789,85 @@
     // These values must kept in sync with
     //  frameworks/base/media/java/android/media/AudioAttributes.java
     // Note that not all framework values are exposed
+    /**
+     * Usage value to use when the usage is unknown.
+     */
     UNKNOWN                            = 0,
+    /**
+     * Usage value to use when the usage is media, such as music, or movie
+     * soundtracks.
+     */
     MEDIA                              = 1,
+    /**
+     * Usage value to use when the usage is voice communications, such as
+     * telephony or VoIP.
+     */
     VOICE_COMMUNICATION                = 2,
+    /**
+     * Usage value to use when the usage is in-call signalling, such as with
+     * a "busy" beep, or DTMF tones.
+     */
     VOICE_COMMUNICATION_SIGNALLING     = 3,
+    /**
+     * Usage value to use when the usage is an alarm (e.g. wake-up alarm).
+     */
     ALARM                              = 4,
+    /**
+     * Usage value to use when the usage is a generic notification.
+     */
     NOTIFICATION                       = 5,
+    /**
+     * Usage value to use when the usage is telephony ringtone.
+     */
     NOTIFICATION_TELEPHONY_RINGTONE    = 6,
+    /**
+     * Usage value to use when the usage is for accessibility, such as with
+     * a screen reader.
+     */
     ASSISTANCE_ACCESSIBILITY           = 11,
+    /**
+     * Usage value to use when the usage is driving or navigation directions.
+     */
     ASSISTANCE_NAVIGATION_GUIDANCE     = 12,
+    /**
+     * Usage value to use when the usage is sonification, such as  with user
+     * interface sounds.
+     */
     ASSISTANCE_SONIFICATION            = 13,
+    /**
+     * Usage value to use when the usage is for game audio.
+     */
     GAME                               = 14,
+    /**
+     * Usage value to use when feeding audio to the platform and replacing
+     * "traditional" audio source, such as audio capture devices.
+     */
     VIRTUAL_SOURCE                     = 15,
+    /**
+     * Usage value to use for audio responses to user queries, audio
+     * instructions or help utterances.
+     */
     ASSISTANT                          = 16,
+    /**
+     * Usage value to use for assistant voice interaction with remote caller
+     * on Cell and VoIP calls.
+     */
     CALL_ASSISTANT                     = 17,
+    /**
+     * Usage value to use when the usage is an emergency.
+     */
     EMERGENCY                          = 1000,
+    /**
+     * Usage value to use when the usage is a safety sound.
+     */
     SAFETY                             = 1001,
+    /**
+     * Usage value to use when the usage is a vehicle status.
+     */
     VEHICLE_STATUS                     = 1002,
+    /**
+     * Usage value to use when the usage is an announcement.
+     */
     ANNOUNCEMENT                       = 1003,
 };
 
@@ -773,10 +876,30 @@
 enum AudioContentType : uint32_t {
     // Do not change these values without updating their counterparts
     // in frameworks/base/media/java/android/media/AudioAttributes.java
+    /**
+     * Content type value to use when the content type is unknown, or other than
+     * the ones defined.
+     */
     UNKNOWN      = 0,
+    /**
+     * Content type value to use when the content type is speech.
+     */
     SPEECH       = 1,
+    /**
+     * Content type value to use when the content type is music.
+     */
     MUSIC        = 2,
+    /**
+     * Content type value to use when the content type is a soundtrack,
+     * typically accompanying a movie or TV program.
+     */
     MOVIE        = 3,
+    /**
+     * Content type value to use when the content type is a sound used to
+     * accompany a user action, such as a beep or sound effect expressing a key
+     * click, or event, such as the type of a sound for a bonus being received
+     * in a game. These sounds are mostly synthesized or short Foley sounds.
+     */
     SONIFICATION = 4,
 };
 
diff --git a/audio/effect/6.0/xml/api/current.txt b/audio/effect/6.0/xml/api/current.txt
index 072cf8f..cd5ca2a 100644
--- a/audio/effect/6.0/xml/api/current.txt
+++ b/audio/effect/6.0/xml/api/current.txt
@@ -34,6 +34,10 @@
 
   public class DeviceProcessType extends audio.effects.V6_0.StreamProcessingType {
     ctor public DeviceProcessType();
+    method public String getAddress();
+    method public audio.effects.V6_0.DeviceType getType();
+    method public void setAddress(String);
+    method public void setType(audio.effects.V6_0.DeviceType);
   }
 
   public enum DeviceType {
diff --git a/audio/effect/6.0/xml/audio_effects_conf.xsd b/audio/effect/6.0/xml/audio_effects_conf.xsd
index fcfecda..eeaaf63 100644
--- a/audio/effect/6.0/xml/audio_effects_conf.xsd
+++ b/audio/effect/6.0/xml/audio_effects_conf.xsd
@@ -255,10 +255,8 @@
     </xs:annotation>
     <xs:complexContent>
       <xs:extension base="aec:streamProcessingType">
-         <xs:complexType>
-             <xs:attribute name="address" type="xs:string" use="required"/>
-             <xs:attribute name="type" type="aec:deviceType" use="required"/>
-         </xs:complexType>
+         <xs:attribute name="address" type="xs:string" use="required"/>
+         <xs:attribute name="type" type="aec:deviceType" use="required"/>
       </xs:extension>
     </xs:complexContent>
   </xs:complexType>
@@ -322,4 +320,4 @@
       <xs:field xpath="@effect"/>
     </xs:keyref>
   </xs:element>
-</xs:schema>
\ No newline at end of file
+</xs:schema>
diff --git a/automotive/evs/1.1/types.hal b/automotive/evs/1.1/types.hal
index f88d223..aafdb70 100644
--- a/automotive/evs/1.1/types.hal
+++ b/automotive/evs/1.1/types.hal
@@ -69,6 +69,8 @@
      * Time that this buffer is being filled.
      */
     int64_t timestamp;
+
+    vec<uint8_t> metadata;
 };
 
 /**
diff --git a/automotive/vehicle/2.0/default/Android.bp b/automotive/vehicle/2.0/default/Android.bp
index a94a37e..e325889 100644
--- a/automotive/vehicle/2.0/default/Android.bp
+++ b/automotive/vehicle/2.0/default/Android.bp
@@ -47,6 +47,9 @@
         "common/src/VehicleUtils.cpp",
         "common/src/VmsUtils.cpp",
     ],
+    shared_libs: [
+        "libbase",
+    ],
     local_include_dirs: ["common/include/vhal_v2_0"],
     export_include_dirs: ["common/include"],
 }
@@ -109,6 +112,9 @@
         "tests/VehiclePropConfigIndex_test.cpp",
         "tests/VmsUtils_test.cpp",
     ],
+    shared_libs: [
+        "libbase",
+    ],
     header_libs: ["libbase_headers"],
     test_suites: ["general-tests"],
 }
@@ -173,7 +179,7 @@
         "libqemu_pipe",
     ],
     cflags: [
-        "-Wno-unused-parameter"
+        "-Wno-unused-parameter",
     ],
 }
 
@@ -200,6 +206,6 @@
         "android.hardware.automotive.vehicle@2.0-virtualization-utils",
     ],
     cflags: [
-        "-Wno-unused-parameter"
+        "-Wno-unused-parameter",
     ],
 }
diff --git a/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleConnector.h b/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleConnector.h
index d40f122..00b5afe 100644
--- a/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleConnector.h
+++ b/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleConnector.h
@@ -65,6 +65,12 @@
     // updateStatus is true if and only if the value is
     // generated by car (ECU/fake generator/injected)
     virtual void onPropertyValue(const VehiclePropValue& value, bool updateStatus) = 0;
+
+    // Dump method forwarded from HIDL's debug()
+    // If implemented, it must return whether the caller should dump its state.
+    virtual bool dump(const hidl_handle& /* handle */, const hidl_vec<hidl_string>& /* options */) {
+        return true;
+    }
 };
 
 /**
@@ -97,6 +103,13 @@
     // updateStatus is true if and only if the value is
     // generated by car (ECU/fake generator/injected)
     virtual void onPropertyValueFromCar(const VehiclePropValue& value, bool updateStatus) = 0;
+
+    // Dump method forwarded from HIDL's debug()
+    // If implemented, it must return whether the caller should dump its state.
+    virtual bool onDump(const hidl_handle& /* handle */,
+                        const hidl_vec<hidl_string>& /* options */) {
+        return true;
+    }
 };
 
 /**
@@ -134,6 +147,10 @@
         return this->onPropertyValue(value, updateStatus);
     }
 
+    bool dump(const hidl_handle& handle, const hidl_vec<hidl_string>& options) override {
+        return this->onDump(handle, options);
+    }
+
     // To be implemented:
     // virtual std::vector<VehiclePropConfig> onGetAllPropertyConfig() = 0;
     // virtual void onPropertyValue(const VehiclePropValue& value) = 0;
diff --git a/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHal.h b/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHal.h
index fd28483..fe01867 100644
--- a/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHal.h
+++ b/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHal.h
@@ -70,6 +70,26 @@
      */
     virtual void onCreate() {}
 
+    /**
+     * Dump method forwarded from HIDL's debug().
+     *
+     * By default it doesn't dump anything and let caller dump its properties, but it could be
+     * override to change the behavior. For example:
+     *
+     * - To augment caller's dump, it should dump its state and return true.
+     * - To not dump anything at all, it should just return false.
+     * - To provide custom dump (like dumping just specific state or executing a custom command),
+     *   it should check if options is not empty, handle the options accordingly, then return false.
+     *
+     * @param handle handle used to dump the contents.
+     * @param options options passed to dump.
+     *
+     * @return whether the caller should dump its state.
+     */
+    virtual bool dump(const hidl_handle& /* handle */, const hidl_vec<hidl_string>& /* options */) {
+        return true;
+    }
+
     void init(
         VehiclePropValuePool* valueObjectPool,
         const HalEventFunction& onHalEvent,
diff --git a/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHalManager.h b/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHalManager.h
index c1e9e88..fcfe761 100644
--- a/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHalManager.h
+++ b/automotive/vehicle/2.0/default/common/include/vhal_v2_0/VehicleHalManager.h
@@ -73,7 +73,9 @@
                                    int32_t propId)  override;
     Return<void> debugDump(debugDump_cb _hidl_cb = nullptr) override;
 
-private:
+    Return<void> debug(const hidl_handle& fd, const hidl_vec<hidl_string>& options) override;
+
+  private:
     using VehiclePropValuePtr = VehicleHal::VehiclePropValuePtr;
     // Returns true if needs to call again shortly.
     using RetriableAction = std::function<bool()>;
@@ -96,6 +98,22 @@
     bool checkReadPermission(const VehiclePropConfig &config) const;
     void onAllClientsUnsubscribed(int32_t propertyId);
 
+    // Dump and commands
+    // TODO: most functions below (exception dump() and cmdSetOne()) should be const, but they rely
+    // on IVehicle.get(), which isn't...
+    void cmdDump(int fd, const hidl_vec<hidl_string>& options);
+    void cmdDumpOneProperty(int fd, int32_t prop, int32_t areaId);
+    void cmdDumpOneProperty(int fd, int rowNumber, const VehiclePropConfig& config);
+
+    static bool checkArgumentsSize(int fd, const hidl_vec<hidl_string>& options, size_t minSize);
+    static bool checkCallerHasWritePermissions(int fd);
+    static bool safelyParseInt(int fd, int index, std::string s, int* out);
+    void cmdHelp(int fd) const;
+    void cmdListAllProperties(int fd) const;
+    void cmdDumpAllProperties(int fd);
+    void cmdDumpSpecificProperties(int fd, const hidl_vec<hidl_string>& options);
+    void cmdSetOneProperty(int fd, const hidl_vec<hidl_string>& options);
+
     static bool isSubscribable(const VehiclePropConfig& config,
                                SubscribeFlags flags);
     static bool isSampleRateFixed(VehiclePropertyChangeMode mode);
diff --git a/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp b/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp
index 393d3ec..5bebd1e 100644
--- a/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp
+++ b/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp
@@ -21,11 +21,20 @@
 #include <cmath>
 #include <fstream>
 
-#include <android/log.h>
+#include <android-base/parseint.h>
+#include <android-base/strings.h>
 #include <android/hardware/automotive/vehicle/2.0/BpHwVehicleCallback.h>
+#include <android/log.h>
+
+#include <hwbinder/IPCThreadState.h>
+
+#include <utils/SystemClock.h>
 
 #include "VehicleUtils.h"
 
+// TODO: figure out how to include private/android_filesystem_config.h instead...
+#define AID_ROOT 0 /* traditional unix root user */
+
 namespace android {
 namespace hardware {
 namespace automotive {
@@ -34,6 +43,10 @@
 
 using namespace std::placeholders;
 
+using ::android::base::EqualsIgnoreCase;
+using ::android::hardware::hidl_handle;
+using ::android::hardware::hidl_string;
+
 constexpr std::chrono::milliseconds kHalEventBatchingTimeWindow(10);
 
 const VehiclePropValue kEmptyValue{};
@@ -172,6 +185,251 @@
     return Void();
 }
 
+Return<void> VehicleHalManager::debug(const hidl_handle& fd, const hidl_vec<hidl_string>& options) {
+    if (fd.getNativeHandle() == nullptr || fd->numFds == 0) {
+        ALOGE("Invalid parameters passed to debug()");
+        return Void();
+    }
+
+    bool shouldContinue = mHal->dump(fd, options);
+    if (!shouldContinue) {
+        ALOGI("Dumped HAL only");
+        return Void();
+    }
+
+    // Do our dump
+    cmdDump(fd->data[0], options);
+    return Void();
+}
+
+void VehicleHalManager::cmdDump(int fd, const hidl_vec<hidl_string>& options) {
+    if (options.size() == 0) {
+        cmdDumpAllProperties(fd);
+        return;
+    }
+    std::string option = options[0];
+    if (EqualsIgnoreCase(option, "--help")) {
+        cmdHelp(fd);
+    } else if (EqualsIgnoreCase(option, "--list")) {
+        cmdListAllProperties(fd);
+    } else if (EqualsIgnoreCase(option, "--get")) {
+        cmdDumpSpecificProperties(fd, options);
+    } else if (EqualsIgnoreCase(option, "--set")) {
+        cmdSetOneProperty(fd, options);
+    } else {
+        dprintf(fd, "Invalid option: %s\n", option.c_str());
+    }
+}
+
+bool VehicleHalManager::checkCallerHasWritePermissions(int fd) {
+    // Double check that's only called by root - it should be be blocked at the HIDL debug() level,
+    // but it doesn't hurt to make sure...
+    if (hardware::IPCThreadState::self()->getCallingUid() != AID_ROOT) {
+        dprintf(fd, "Must be root\n");
+        return false;
+    }
+    return true;
+}
+
+bool VehicleHalManager::checkArgumentsSize(int fd, const hidl_vec<hidl_string>& options,
+                                           size_t minSize) {
+    size_t size = options.size();
+    if (size >= minSize) {
+        return true;
+    }
+    dprintf(fd, "Invalid number of arguments: required at least %zu, got %zu\n", minSize, size);
+    return false;
+}
+
+bool VehicleHalManager::safelyParseInt(int fd, int index, std::string s, int* out) {
+    if (!android::base::ParseInt(s, out)) {
+        dprintf(fd, "non-integer argument at index %d: %s\n", index, s.c_str());
+        return false;
+    }
+    return true;
+}
+
+void VehicleHalManager::cmdHelp(int fd) const {
+    dprintf(fd, "Usage: \n\n");
+    dprintf(fd, "[no args]: dumps (id and value) all supported properties \n");
+    dprintf(fd, "--help: shows this help\n");
+    dprintf(fd, "--list: lists the ids of all supported properties\n");
+    dprintf(fd, "--get <PROP1> [PROP2] [PROPN]: dumps the value of specific properties \n");
+    // TODO: support other formats (int64, float, bytes)
+    dprintf(fd,
+            "--set <PROP> <i|s> <VALUE_1> [<i|s> <VALUE_N>] [a AREA_ID] : sets the value of "
+            "property PROP, using arbitrary number of key/value parameters (i for int32, "
+            "s for string) and an optional area.\n"
+            "Notice that the string value can be set just once, while the other can have multiple "
+            "values (so they're used in the respective array)\n");
+}
+
+void VehicleHalManager::cmdListAllProperties(int fd) const {
+    auto& halConfig = mConfigIndex->getAllConfigs();
+    size_t size = halConfig.size();
+    if (size == 0) {
+        dprintf(fd, "no properties to list\n");
+        return;
+    }
+    int i = 0;
+    dprintf(fd, "listing %zu properties\n", size);
+    for (const auto& config : halConfig) {
+        dprintf(fd, "%d: %d\n", ++i, config.prop);
+    }
+}
+
+void VehicleHalManager::cmdDumpAllProperties(int fd) {
+    auto& halConfig = mConfigIndex->getAllConfigs();
+    size_t size = halConfig.size();
+    if (size == 0) {
+        dprintf(fd, "no properties to dump\n");
+        return;
+    }
+    int rowNumber = 0;
+    dprintf(fd, "dumping %zu properties\n", size);
+    for (auto& config : halConfig) {
+        cmdDumpOneProperty(fd, ++rowNumber, config);
+    }
+}
+
+void VehicleHalManager::cmdDumpOneProperty(int fd, int rowNumber, const VehiclePropConfig& config) {
+    size_t numberAreas = config.areaConfigs.size();
+    if (numberAreas == 0) {
+        if (rowNumber > 0) {
+            dprintf(fd, "%d: ", rowNumber);
+        }
+        cmdDumpOneProperty(fd, config.prop, /* areaId= */ 0);
+        return;
+    }
+    for (size_t j = 0; j < numberAreas; ++j) {
+        if (rowNumber > 0) {
+            if (numberAreas > 1) {
+                dprintf(fd, "%d/%zu: ", rowNumber, j);
+            } else {
+                dprintf(fd, "%d: ", rowNumber);
+            }
+        }
+        cmdDumpOneProperty(fd, config.prop, config.areaConfigs[j].areaId);
+    }
+}
+
+void VehicleHalManager::cmdDumpSpecificProperties(int fd, const hidl_vec<hidl_string>& options) {
+    if (!checkArgumentsSize(fd, options, 2)) return;
+
+    // options[0] is the command itself...
+    int rowNumber = 0;
+    size_t size = options.size();
+    for (size_t i = 1; i < size; ++i) {
+        int prop;
+        if (!safelyParseInt(fd, i, options[i], &prop)) return;
+        const auto* config = getPropConfigOrNull(prop);
+        if (config == nullptr) {
+            dprintf(fd, "No property %d\n", prop);
+            continue;
+        }
+        if (size > 2) {
+            // Only show row number if there's more than 1
+            rowNumber++;
+        }
+        cmdDumpOneProperty(fd, rowNumber, *config);
+    }
+}
+
+void VehicleHalManager::cmdDumpOneProperty(int fd, int32_t prop, int32_t areaId) {
+    VehiclePropValue input;
+    input.prop = prop;
+    input.areaId = areaId;
+    auto callback = [&](StatusCode status, const VehiclePropValue& output) {
+        if (status == StatusCode::OK) {
+            dprintf(fd, "%s\n", toString(output).c_str());
+        } else {
+            dprintf(fd, "Could not get property %d. Error: %s\n", prop, toString(status).c_str());
+        }
+    };
+    get(input, callback);
+}
+
+void VehicleHalManager::cmdSetOneProperty(int fd, const hidl_vec<hidl_string>& options) {
+    if (!checkCallerHasWritePermissions(fd) || !checkArgumentsSize(fd, options, 3)) return;
+
+    size_t size = options.size();
+
+    // Syntax is --set PROP Type1 Value1 TypeN ValueN, so number of arguments must be even
+    if (size % 2 != 0) {
+        dprintf(fd, "must pass even number of arguments (passed %zu)\n", size);
+        return;
+    }
+    int numberValues = (size - 2) / 2;
+
+    VehiclePropValue prop;
+    if (!safelyParseInt(fd, 1, options[1], &prop.prop)) return;
+    prop.timestamp = elapsedRealtimeNano();
+    prop.status = VehiclePropertyStatus::AVAILABLE;
+
+    // First pass: calculate sizes
+    int sizeInt32 = 0;
+    int stringIndex = 0;
+    int areaIndex = 0;
+    for (int i = 2, kv = 1; kv <= numberValues; kv++) {
+        // iterate through the kv=1..n key/value pairs, accessing indexes i / i+1 at each step
+        std::string type = options[i];
+        std::string value = options[i + 1];
+        if (EqualsIgnoreCase(type, "i")) {
+            sizeInt32++;
+        } else if (EqualsIgnoreCase(type, "s")) {
+            if (stringIndex != 0) {
+                dprintf(fd,
+                        "defining string value (%s) again at index %d (already defined at %d=%s"
+                        ")\n",
+                        value.c_str(), i, stringIndex, options[stringIndex + 1].c_str());
+                return;
+            }
+            stringIndex = i;
+        } else if (EqualsIgnoreCase(type, "a")) {
+            if (areaIndex != 0) {
+                dprintf(fd,
+                        "defining area value (%s) again at index %d (already defined at %d=%s"
+                        ")\n",
+                        value.c_str(), i, areaIndex, options[areaIndex + 1].c_str());
+                return;
+            }
+            areaIndex = i;
+        } else {
+            dprintf(fd, "invalid (%s) type at index %d\n", type.c_str(), i);
+            return;
+        }
+        i += 2;
+    }
+    prop.value.int32Values.resize(sizeInt32);
+
+    // Second pass: populate it
+    int indexInt32 = 0;
+    for (int i = 2, kv = 1; kv <= numberValues; kv++) {
+        // iterate through the kv=1..n key/value pairs, accessing indexes i / i+1 at each step
+        int valueIndex = i + 1;
+        std::string type = options[i];
+        std::string value = options[valueIndex];
+        if (EqualsIgnoreCase(type, "i")) {
+            int safeInt;
+            if (!safelyParseInt(fd, valueIndex, value, &safeInt)) return;
+            prop.value.int32Values[indexInt32++] = safeInt;
+        } else if (EqualsIgnoreCase(type, "s")) {
+            prop.value.stringValue = value;
+        } else if (EqualsIgnoreCase(type, "a")) {
+            if (!safelyParseInt(fd, valueIndex, value, &prop.areaId)) return;
+        }
+        i += 2;
+    }
+    ALOGD("Setting prop %s", toString(prop).c_str());
+    auto status = set(prop);
+    if (status == StatusCode::OK) {
+        dprintf(fd, "Set property %s\n", toString(prop).c_str());
+    } else {
+        dprintf(fd, "Failed to set property %s: %s\n", toString(prop).c_str(),
+                toString(status).c_str());
+    }
+}
+
 void VehicleHalManager::init() {
     ALOGI("VehicleHalManager::init");
 
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
index bf85da2..785f0e0 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
@@ -76,6 +76,7 @@
 constexpr int WHEEL_FRONT_RIGHT = (int)VehicleAreaWheel::RIGHT_FRONT;
 constexpr int WHEEL_REAR_LEFT = (int)VehicleAreaWheel::LEFT_REAR;
 constexpr int WHEEL_REAR_RIGHT = (int)VehicleAreaWheel::RIGHT_REAR;
+constexpr int INITIAL_USER_INFO = (int)VehicleProperty::INITIAL_USER_INFO;
 
 /**
  * This property is used for test purpose to generate fake events. Here is the test package that
@@ -87,23 +88,23 @@
 /**
  * This property is used for test purpose to set properties' value from vehicle.
  * For example: Mocking hard button press triggering a HVAC fan speed change.
- * Android set kSetPropertyFromVehcileForTest with an array of integer {HVAC_FAN_SPEED, value of
+ * Android set kSetPropertyFromVehicleForTest with an array of integer {HVAC_FAN_SPEED, value of
  * fan speed} and a long value indicates the timestamp of the events .
  * It only works with integer type properties.
  */
-const int32_t kSetIntPropertyFromVehcileForTest =
+const int32_t kSetIntPropertyFromVehicleForTest =
         0x1112 | VehiclePropertyGroup::VENDOR | VehicleArea::GLOBAL | VehiclePropertyType::MIXED;
 /**
  * This property is used for test purpose to set properties' value from vehicle.
  * It only works with float type properties.
  */
-const int32_t kSetFloatPropertyFromVehcileForTest =
+const int32_t kSetFloatPropertyFromVehicleForTest =
         0x1113 | VehiclePropertyGroup::VENDOR | VehicleArea::GLOBAL | VehiclePropertyType::MIXED;
 /**
  * This property is used for test purpose to set properties' value from vehicle.
  * It only works with boolean type properties.
  */
-const int32_t kSetBooleanPropertyFromVehcileForTest =
+const int32_t kSetBooleanPropertyFromVehicleForTest =
         0x1114 | VehiclePropertyGroup::VENDOR | VehicleArea::GLOBAL | VehiclePropertyType::MIXED;
 
 /**
@@ -695,7 +696,7 @@
         {
                 .config =
                         {
-                                .prop = kSetIntPropertyFromVehcileForTest,
+                                .prop = kSetIntPropertyFromVehicleForTest,
                                 .access = VehiclePropertyAccess::WRITE,
                                 .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
                                 .configArray = {0, 0, 0, 2, 1, 0, 0, 0, 0},
@@ -705,7 +706,7 @@
         {
                 .config =
                         {
-                                .prop = kSetFloatPropertyFromVehcileForTest,
+                                .prop = kSetFloatPropertyFromVehicleForTest,
                                 .access = VehiclePropertyAccess::WRITE,
                                 .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
                                 .configArray = {0, 0, 1, 0, 1, 0, 1, 0, 0},
@@ -715,7 +716,7 @@
         {
                 .config =
                         {
-                                .prop = kSetBooleanPropertyFromVehcileForTest,
+                                .prop = kSetBooleanPropertyFromVehicleForTest,
                                 .access = VehiclePropertyAccess::WRITE,
                                 .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
                                 .configArray = {0, 1, 1, 0, 1, 0, 0, 0, 0},
@@ -990,6 +991,16 @@
                                   (int)VehicleVendorPermission::PERMISSION_DEFAULT},
                  },
          .initialValue = {.int32Values = {1}}},
+
+        {
+                .config =
+                        {
+                                .prop = toInt(VehicleProperty::INITIAL_USER_INFO),
+                                .access = VehiclePropertyAccess::READ_WRITE,
+                                .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+                        },
+        },
+
 };
 
 }  // impl
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.cpp
index 222fe5e..63ad93c 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.cpp
@@ -13,6 +13,11 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
+
+#define LOG_TAG "automotive.vehicle@2.0-connector"
+
+#include <fstream>
+
 #include <android-base/logging.h>
 #include <utils/SystemClock.h>
 
@@ -202,8 +207,8 @@
         case kGenerateFakeDataControllingProperty:
             return handleGenerateFakeDataRequest(value);
 
-        // set the value from vehcile side, used in end to end test.
-        case kSetIntPropertyFromVehcileForTest: {
+        // set the value from vehicle side, used in end to end test.
+        case kSetIntPropertyFromVehicleForTest: {
             auto updatedPropValue = createVehiclePropValue(VehiclePropertyType::INT32, 1);
             updatedPropValue->prop = value.value.int32Values[0];
             updatedPropValue->value.int32Values[0] = value.value.int32Values[1];
@@ -212,7 +217,7 @@
             onPropertyValueFromCar(*updatedPropValue, updateStatus);
             return StatusCode::OK;
         }
-        case kSetFloatPropertyFromVehcileForTest: {
+        case kSetFloatPropertyFromVehicleForTest: {
             auto updatedPropValue = createVehiclePropValue(VehiclePropertyType::FLOAT, 1);
             updatedPropValue->prop = value.value.int32Values[0];
             updatedPropValue->value.floatValues[0] = value.value.floatValues[0];
@@ -221,7 +226,7 @@
             onPropertyValueFromCar(*updatedPropValue, updateStatus);
             return StatusCode::OK;
         }
-        case kSetBooleanPropertyFromVehcileForTest: {
+        case kSetBooleanPropertyFromVehicleForTest: {
             auto updatedPropValue = createVehiclePropValue(VehiclePropertyType::BOOLEAN, 1);
             updatedPropValue->prop = value.value.int32Values[1];
             updatedPropValue->value.int32Values[0] = value.value.int32Values[0];
@@ -261,6 +266,8 @@
                     break;
             }
             break;
+        case INITIAL_USER_INFO:
+            return onSetInitialUserInfo(value, updateStatus);
         default:
             break;
     }
@@ -274,6 +281,134 @@
     return StatusCode::OK;
 }
 
+/**
+ * INITIAL_USER_INFO is called by Android when it starts, and it's expecting a property change
+ * indicating what the initial user should be.
+ *
+ * During normal circumstances, the emulator will reply right away, passing a response if
+ * InitialUserInfoResponseAction::DEFAULT (so Android could use its own logic to decide which user
+ * to boot).
+ *
+ * But during development / testing, the behavior can be changed using lshal dump, which must use
+ * the areaId to indicate what should happen next.
+ *
+ * So, the behavior of set(INITIAL_USER_INFO) is:
+ *
+ * - if it has an areaId, store the property into mInitialUserResponseFromCmd (as it was called by
+ *   lshal).
+ * - else if mInitialUserResponseFromCmd is not set, return a response with the same request id and
+ *   InitialUserInfoResponseAction::DEFAULT
+ * - else the behavior is defined by the areaId on mInitialUserResponseFromCmd:
+ * - if it's 1, reply with mInitialUserResponseFromCmd and the right request id
+ * - if it's 2, reply with mInitialUserResponseFromCmd but a wrong request id (so Android can test
+ *   this error scenario)
+ * - if it's 3, then don't send a property change (so Android can emulate a timeout)
+ *
+ */
+StatusCode EmulatedVehicleServer::onSetInitialUserInfo(const VehiclePropValue& value,
+                                                       bool updateStatus) {
+    // TODO: LOG calls below might be more suited to be DEBUG, but those are not being logged
+    // (even when explicitly calling setprop log.tag. As this class should be using ALOG instead of
+    // LOG, it's not worth investigating why...
+
+    if (value.areaId != 0) {
+        LOG(INFO) << "set(INITIAL_USER_INFO) called from lshal; storing it: " << toString(value);
+        mInitialUserResponseFromCmd.reset(new VehiclePropValue(value));
+        return StatusCode::OK;
+    }
+    LOG(INFO) << "set(INITIAL_USER_INFO) called from Android: " << toString(value);
+
+    if (value.value.int32Values.size() == 0) {
+        LOG(ERROR) << "invalid request (no requestId): " << toString(value);
+        return StatusCode::INVALID_ARG;
+    }
+    int32_t requestId = value.value.int32Values[0];
+
+    // Create the update property and set common values
+    auto updatedValue = createVehiclePropValue(VehiclePropertyType::MIXED, 0);
+    updatedValue->prop = INITIAL_USER_INFO;
+    updatedValue->timestamp = elapsedRealtimeNano();
+
+    if (mInitialUserResponseFromCmd == nullptr) {
+        updatedValue->value.int32Values.resize(2);
+        updatedValue->value.int32Values[0] = requestId;
+        updatedValue->value.int32Values[1] = (int32_t)InitialUserInfoResponseAction::DEFAULT;
+        LOG(INFO) << "no lshal response; returning InitialUserInfoResponseAction::DEFAULT: "
+                  << toString(*updatedValue);
+        onPropertyValueFromCar(*updatedValue, updateStatus);
+        return StatusCode::OK;
+    }
+
+    // mInitialUserResponseFromCmd is used for just one request
+    std::unique_ptr<VehiclePropValue> response = std::move(mInitialUserResponseFromCmd);
+
+    // TODO(b/138709788): rather than populate the raw values directly, it should use the
+    // libraries that convert a InitialUserInfoResponse into a VehiclePropValue)
+
+    switch (response->areaId) {
+        case 1:
+            LOG(INFO) << "returning response with right request id";
+            *updatedValue = *response;
+            updatedValue->areaId = 0;
+            updatedValue->value.int32Values[0] = requestId;
+            break;
+        case 2:
+            LOG(INFO) << "returning response with wrong request id";
+            *updatedValue = *response;
+            updatedValue->areaId = 0;
+            updatedValue->value.int32Values[0] = -requestId;
+            break;
+        case 3:
+            LOG(INFO) << "not generating a property change event because of lshal prop: "
+                      << toString(*response);
+            return StatusCode::OK;
+        default:
+            LOG(ERROR) << "invalid action on lshal response: " << toString(*response);
+            return StatusCode::INTERNAL_ERROR;
+    }
+
+    LOG(INFO) << "updating property to: " << toString(*updatedValue);
+    onPropertyValueFromCar(*updatedValue, updateStatus);
+    return StatusCode::OK;
+}
+
+bool EmulatedVehicleServer::onDump(const hidl_handle& handle,
+                                   const hidl_vec<hidl_string>& options) {
+    int fd = handle->data[0];
+
+    if (options.size() > 0) {
+        if (options[0] == "--help") {
+            dprintf(fd, "Emulator-specific usage:\n");
+            dprintf(fd, "--user-hal: dumps state used for user management \n");
+            dprintf(fd, "\n");
+            // Include caller's help options
+            return true;
+        } else if (options[0] == "--user-hal") {
+            dumpUserHal(fd, "");
+            return false;
+
+        } else {
+            // Let caller handle the options...
+            return true;
+        }
+    }
+
+    dprintf(fd, "Emulator-specific state:\n");
+    dumpUserHal(fd, "  ");
+    dprintf(fd, "\n");
+
+    return true;
+}
+
+void EmulatedVehicleServer::dumpUserHal(int fd, std::string indent) {
+    if (mInitialUserResponseFromCmd != nullptr) {
+        dprintf(fd, "%sInitial User Info: %s\n", indent.c_str(),
+                toString(*mInitialUserResponseFromCmd).c_str());
+    } else {
+        dprintf(fd, "%sNo Initial User Info\n", indent.c_str());
+    }
+}
+
 EmulatedPassthroughConnectorPtr makeEmulatedPassthroughConnector() {
     return std::make_unique<EmulatedPassthroughConnector>();
 }
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.h b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.h
index 5fc6493..4850d32 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.h
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleConnector.h
@@ -54,6 +54,8 @@
 
     StatusCode onSetProperty(const VehiclePropValue& value, bool updateStatus) override;
 
+    bool onDump(const hidl_handle& fd, const hidl_vec<hidl_string>& options) override;
+
     // Set the Property Value Pool used in this server
     void setValuePool(VehiclePropValuePool* valuePool);
 
@@ -77,6 +79,11 @@
             std::bind(&EmulatedVehicleServer::onFakeValueGenerated, this, std::placeholders::_1)};
 
     VehiclePropValuePool* mValuePool{nullptr};
+
+    // TODO(b/146207078): it might be clearer to move members below to an EmulatedUserHal class
+    std::unique_ptr<VehiclePropValue> mInitialUserResponseFromCmd;
+    StatusCode onSetInitialUserInfo(const VehiclePropValue& value, bool updateStatus);
+    void dumpUserHal(int fd, std::string indent);
 };
 
 // Helper functions
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.cpp
index 5c16bf7..692c7f7 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.cpp
@@ -131,6 +131,10 @@
     return v;
 }
 
+bool EmulatedVehicleHal::dump(const hidl_handle& fd, const hidl_vec<hidl_string>& options) {
+    return mVehicleClient->dump(fd, options);
+}
+
 StatusCode EmulatedVehicleHal::set(const VehiclePropValue& propValue) {
     constexpr bool updateStatus = false;
 
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.h b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.h
index a8378da..ebc405e 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.h
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedVehicleHal.h
@@ -57,6 +57,7 @@
     StatusCode set(const VehiclePropValue& propValue) override;
     StatusCode subscribe(int32_t property, float sampleRate) override;
     StatusCode unsubscribe(int32_t property) override;
+    bool dump(const hidl_handle& fd, const hidl_vec<hidl_string>& options) override;
 
     //  Methods from EmulatedVehicleHalIface
     bool setPropertyFromVehicle(const VehiclePropValue& propValue) override;
diff --git a/bluetooth/1.0/vts/functional/Android.bp b/bluetooth/1.0/vts/functional/Android.bp
index 54039e5..cf25cc8 100644
--- a/bluetooth/1.0/vts/functional/Android.bp
+++ b/bluetooth/1.0/vts/functional/Android.bp
@@ -22,5 +22,8 @@
         "android.hardware.bluetooth@1.0",
         "libbluetooth-types",
     ],
-    test_suites: ["general-tests"],
+    test_suites: [
+        "general-tests",
+        "vts-core",
+    ],
 }
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
index 9a8f336..8eb7587 100644
--- a/compatibility_matrices/compatibility_matrix.current.xml
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -161,7 +161,7 @@
     </hal>
     <hal format="hidl" optional="true">
         <name>android.hardware.drm</name>
-        <version>1.0-3</version>
+        <version>1.3</version>
         <interface>
             <name>ICryptoFactory</name>
             <regex-instance>.*</regex-instance>
diff --git a/current.txt b/current.txt
index 8d068d0..62b9877 100644
--- a/current.txt
+++ b/current.txt
@@ -596,7 +596,7 @@
 5f6d3097ba84cb63c430787123f4de1b31c11f90b531b98eae9a8623a5ae962a android.hardware.neuralnetworks@1.1::types
 fb382e986c10b8fbb797a8546e8f9ea6d1107bfe6f3fb7e57f6bbbf1f807a906 android.hardware.neuralnetworks@1.2::IDevice
 40e71cd693de5b832325c5d8f081f2ff20a7ba2b89d401cee5b4b3eb0e241681 android.hardware.neuralnetworks@1.2::IPreparedModel
-7f7ef383268c95a1b8fe4e55c662bc806bb0ac11a154f6b049a113a44b0f024f android.hardware.neuralnetworks@1.2::types
+6c29d6fdd5445911df5456b3b84b949cdd59fca0c0b5507662f26a5cac0cf5e5 android.hardware.neuralnetworks@1.2::types
 a785a57447a81e9c130eef6904c3a5c256076c6a04588c40620ebd6fa2660d77 android.hardware.radio@1.2::types
 1a6e2bd289f22931c526b21916910f1d4c436b7acb9556e4243de4ce8e6cc2e4 android.hardware.soundtrigger@2.0::ISoundTriggerHwCallback
 fd65298e1e09e0e3c781ab18305920d757dbe55a3b459ce17814ec5cf6dfee99 android.hardware.wifi@1.0::IWifiP2pIface
@@ -605,14 +605,14 @@
 
 # HALs released in Android R
 e966a3437d6a98d9d9e14e9d672088771716031900c0deb55a0946c751a03a44 android.hardware.audio@6.0::types
-dd3e9280be60a5e042331c1046d13938e2cc323dc4b267cc74d544bf62fc0314 android.hardware.audio@6.0::IDevice
+7241bd4596a927cd46d4b82f5e29e2cbe57f194aa1b25555f1d1d352e8b15c61 android.hardware.audio@6.0::IDevice
 2402876cbc23c0de3690a665eca84fd3857d1808dba5cad25ce272f81ecef8c9 android.hardware.audio@6.0::IDevicesFactory
 bca5379d5065e2e08b6ad7308ffc8a71a972fc0698bec678ea32eea786d01cb5 android.hardware.audio@6.0::IPrimaryDevice
 fd1f1b29f26b42e886220f04a08086c00e5ade9d7b53f095438e578ab9d42a93 android.hardware.audio@6.0::IStream
 2df5d5866b37776f25079c0e54b54350a2abe4e025a59c9e02a7d3abe8ca00e8 android.hardware.audio@6.0::IStreamIn
 78e4138cc8307c11fc777c3bd376e581ba4ba48196b05ca1d7cdfa515c87b48a android.hardware.audio@6.0::IStreamOut
 997fdaad7a9d17ee7e01feb7031a753e2365e72ad30b11d950e9183fabdf3844 android.hardware.audio@6.0::IStreamOutCallback
-43a3303378f5b9852c2da9ac2c1d440965aab7ba02a800229e7b3c84e2167e06 android.hardware.audio.common@6.0::types
+167ed5cfb7d91db2e2bf20f1320c1a9004eeb768e26f535e0f7db94a21867d21 android.hardware.audio.common@6.0::types
 817930d58412d662cb45e641c50cb62c727e4a3e3ffe7029a53cad9677b97d58 android.hardware.audio.effect@6.0::types
 525bec6b44f1103869c269a128d51b8dccd73af5340ba863c8886c68357c7faf android.hardware.audio.effect@6.0::IAcousticEchoCancelerEffect
 8d76bbe3719d051a8e9a1dcf9244f37f5b0a491feb249fa48391edf7cb4f3131 android.hardware.audio.effect@6.0::IAutomaticGainControlEffect
@@ -645,8 +645,8 @@
 4d85e814f94949dae4dc6cb82bbd7d6bb24ffafda6ddb2eac928d2a4fc2e21ce android.hardware.cas@1.2::types
 66931c2506fbb5af61f20138cb05e0a09e7bf67d6964c231d27c648933bb33ec android.hardware.drm@1.3::ICryptoFactory
 994d08ab27d613022c258a9ec48cece7adf2a305e92df5d76ef923e2c6665f64 android.hardware.drm@1.3::IDrmFactory
-881aa8720fb1d69aa9843bfab69d810ab7654a61d2f5ab5e2626cbf240f24eaf android.hardware.dumpstate@1.1::types
-13b33f623521ded51a6c0f7ea5b77e97066d0aa1e38a83c2873f08ad67294f89 android.hardware.dumpstate@1.1::IDumpstateDevice
+446287268831f4ddfac4a51bb1c32ae1e48e47bccd535fccc2c4546d0e7c4013 android.hardware.dumpstate@1.1::types
+f284ffde7cadf5a1364b75ab313baf22401eeca289bdde2a2dc7a27ea4ab98d7 android.hardware.dumpstate@1.1::IDumpstateDevice
 769d346927a94fd40ee80a5a976d8d15cf022ef99c5900738f4a82f26c0ed229 android.hardware.gnss@2.1::types
 88371e0edf69a1f72bfc45ecb2335e9b145e87339d3eecc92664a1fb200213ba android.hardware.gnss@2.1::IGnss
 ba62e1e8993bfb9f27fa04816fa0f2241ae2d01edfa3d0c04182e2e5de80045c android.hardware.gnss@2.1::IGnssCallback
@@ -668,12 +668,12 @@
 df9c79c4fdde2821550c6d5c3d07f5ec0adfb1b702561ce543c906ddef698703 android.hardware.media.c2@1.1::IComponent
 a3eddd9bbdc87e8c22764070037dd1154f1cf006e6fba93364c4f85d4c134a19 android.hardware.media.c2@1.1::IComponentStore
 65c16331e57f6dd68b3971f06f78fe9e3209afb60630c31705aa355f9a52bf0d android.hardware.neuralnetworks@1.3::IBuffer
-9b41dd49e2dcc2ecb4243d03f8421d72494ada5cf2945bff88f0019eeca56923 android.hardware.neuralnetworks@1.3::IDevice
+9db064ee44268a876be0367ff771e618362d39ec603b6ecab17e1575725fcd87 android.hardware.neuralnetworks@1.3::IDevice
 4167dc3ad35e9cd0d2057d4868c7675ae2c3c9d05bbd614c1f5dccfa5fd68797 android.hardware.neuralnetworks@1.3::IExecutionCallback
 2fa3679ad7c94b5e88724adcd560c561041068a4ca565c63830e68101988746a android.hardware.neuralnetworks@1.3::IFencedExecutionCallback
 237b23b126a66f3432658020fed78cdd06ba6297459436fe6bae0ba753370833 android.hardware.neuralnetworks@1.3::IPreparedModel
 0439a1fbbec7f16e5e4c653d85ac685d51bfafbae15b8f8cca530acdd7d6a8ce android.hardware.neuralnetworks@1.3::IPreparedModelCallback
-3646950b10f7cacdafca13609b0e18496cea942f3bdfe920494661856eff48bb android.hardware.neuralnetworks@1.3::types
+abbc4e1a969881c9f8ab587add5b5e75b08df834c9c969c013ae38cb4bb16f6a android.hardware.neuralnetworks@1.3::types
 3e01d4446cd69fd1c48f8572efd97487bc179564b32bd795800b97bbe10be37b android.hardware.wifi@1.4::IWifi
 c67aaf26a7a40d14ea61e70e20afacbd0bb906df1704d585ac8599fbb69dd44b android.hardware.wifi.hostapd@1.2::IHostapd
 2b5a7ea572b736030c64a3b4043af244425477c4672301780fe15aba5ed393d9 android.hardware.wifi.hostapd@1.2::types
@@ -685,7 +685,7 @@
 e1d34b83188a8ef3c507ec53c0ebcf714863c746da7f4a05460453f7c4c09389 android.hardware.radio@1.5::types
 8062d0a1a03594dd8b448adcf6f08856b5720f7e33f9b785a21d3ef74a4f211d android.hardware.radio@1.5::IRadio
 e96ae1c3a9c0689002ec2318e9c587f4f607c16a75a3cd38788b77eb91072021 android.hardware.radio@1.5::IRadioIndication
-7f2439b48bda2961c6d629d0415eee66d519142cf9537f05e9d285153c70ca85 android.hardware.radio@1.5::IRadioResponse
+c8a8e4c3998ebdf1c71ece2d3ecb033ae17798830bed4b30a53e5991aa219e3a android.hardware.radio@1.5::IRadioResponse
 dcc8872337f0135e81970e1d8d5fd7139160dc80e9be76f0ae05290fa7e472b8 android.hardware.radio.config@1.3::types
 a2977755bc5f1ef47f04b7f2400632efda6218e1515dba847da487145cfabc4f android.hardware.radio.config@1.3::IRadioConfig
 742360c775313438b0f82256eac62fb5bbc76a6ae6f388573f3aa142fb2c1eea android.hardware.radio.config@1.3::IRadioConfigIndication
diff --git a/dumpstate/1.1/IDumpstateDevice.hal b/dumpstate/1.1/IDumpstateDevice.hal
index 24831b3..502c460 100644
--- a/dumpstate/1.1/IDumpstateDevice.hal
+++ b/dumpstate/1.1/IDumpstateDevice.hal
@@ -13,6 +13,7 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
+
 package android.hardware.dumpstate@1.1;
 
 import @1.0::IDumpstateDevice;
@@ -28,14 +29,19 @@
      * The 1.0 version of #dumpstateBoard(handle) should just delegate to this new method and pass
      * DumpstateMode::DEFAULT and a timeout of 30,000ms (30 seconds).
      *
+     * This method may still be called by the dumpstate routine even if getDeviceLoggingEnabled
+     * returns false. In this case, it must return DumpstateStatus::DEVICE_LOGGING_NOT_ENABLED.
+     *
      * @param h A native handle with one or two valid file descriptors. The first FD is for text
      *     output, the second (if present) is for binary output.
      * @param mode A mode value to restrict dumped content.
      * @param timeoutMillis An approximate "budget" for how much time this call has been allotted.
      *     If execution runs longer than this, the IDumpstateDevice service may be killed and only
      *     partial information will be included in the report.
+     * @return status A DumpstateStatus value indicating the final result.
      */
-    dumpstateBoard_1_1(handle h, DumpstateMode mode, uint64_t timeoutMillis);
+    dumpstateBoard_1_1(handle h, DumpstateMode mode, uint64_t timeoutMillis)
+        generates (DumpstateStatus status);
 
     /**
      * Turns device vendor logging on or off.
@@ -46,8 +52,20 @@
      * memory/storage/battery impacts, calling this method on a user build should only be done after
      * user consent has been obtained, e.g. from a toggle in developer settings.
      *
+     * Even if device logging has been disabled, dumpstateBoard may still be called by the dumpstate
+     * routine. In this case, it must return DumpstateStatus::DEVICE_LOGGING_NOT_ENABLED.
+     *
      * @param enable Whether to enable or disable device vendor logging.
-     * @return success Whether or not the change took effect.
      */
-    setDeviceLoggingEnabled(bool enable) generates (bool success);
+    setDeviceLoggingEnabled(bool enable);
+
+    /**
+     * Queries the current state of device logging. Primarily for UI and informative purposes.
+     *
+     * Even if device logging has been disabled, dumpstateBoard may still be called by the dumpstate
+     * routine. In this case, it must return DumpstateStatus::DEVICE_LOGGING_NOT_ENABLED.
+     *
+     * @return enabled Whether or not vendor logging is currently enabled.
+     */
+    getDeviceLoggingEnabled() generates (bool enabled);
 };
diff --git a/dumpstate/1.1/types.hal b/dumpstate/1.1/types.hal
index a6f391a..f5cbade 100644
--- a/dumpstate/1.1/types.hal
+++ b/dumpstate/1.1/types.hal
@@ -13,6 +13,7 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
+
 package android.hardware.dumpstate@1.1;
 
 /**
@@ -23,22 +24,18 @@
      * Takes a bug report without user interference.
      */
     FULL = 0,
-
     /**
      * Interactive bug report, i.e. triggered by the user.
      */
     INTERACTIVE = 1,
-
     /**
      * Remote bug report triggered by DevicePolicyManager, for example.
      */
     REMOTE = 2,
-
     /**
      * Bug report triggered on a wear device.
      */
     WEAR = 3,
-
     /**
      * Bug report limited to only connectivity info (cellular, wifi, and networking). Sometimes
      * called "telephony" in legacy contexts.
@@ -49,14 +46,34 @@
      * user application traffic.
      */
     CONNECTIVITY = 4,
-
     /**
      * Bug report limited to only wifi info.
      */
     WIFI = 5,
-
     /**
-     * Default mode.
+     * Default mode, essentially analogous to calling @1.0::IDumpstateDevice.dumpstateBoard(handle).
+     * This mode MUST be supported if the dumpstate HAL is implemented.
      */
-    DEFAULT = 6
+    DEFAULT = 6,
+};
+
+/**
+ * A simple return enum for use with dumpstateBoard_1_1.
+ */
+enum DumpstateStatus : uint32_t {
+    OK = 0,
+    /**
+     * Returned for cases where the device doesn't support the given DumpstateMode (e.g. a phone
+     * trying to use DumpstateMode::WEAR).
+     */
+    UNSUPPORTED_MODE = 1,
+    /**
+     * Returned for cases where an IllegalArgumentException is typically appropriate, e.g. missing
+     * file descriptors.
+     */
+    ILLEGAL_ARGUMENT = 2,
+    /**
+     * Returned when device logging is not enabled.
+     */
+    DEVICE_LOGGING_NOT_ENABLED = 3,
 };
diff --git a/dumpstate/1.1/vts/functional/VtsHalDumpstateV1_1TargetTest.cpp b/dumpstate/1.1/vts/functional/VtsHalDumpstateV1_1TargetTest.cpp
index 583efbf..089b039 100644
--- a/dumpstate/1.1/vts/functional/VtsHalDumpstateV1_1TargetTest.cpp
+++ b/dumpstate/1.1/vts/functional/VtsHalDumpstateV1_1TargetTest.cpp
@@ -19,6 +19,7 @@
 #include <fcntl.h>
 #include <unistd.h>
 
+#include <functional>
 #include <vector>
 
 #include <android/hardware/dumpstate/1.1/IDumpstateDevice.h>
@@ -34,21 +35,56 @@
 using ::android::sp;
 using ::android::hardware::Return;
 using ::android::hardware::dumpstate::V1_1::DumpstateMode;
+using ::android::hardware::dumpstate::V1_1::DumpstateStatus;
 using ::android::hardware::dumpstate::V1_1::IDumpstateDevice;
+using ::android::hardware::dumpstate::V1_1::toString;
 
 class DumpstateHidl1_1Test : public ::testing::TestWithParam<std::string> {
-  public:
-    virtual void SetUp() override {
+  protected:
+    virtual void SetUp() override { GetService(); }
+
+    void GetService() {
         dumpstate = IDumpstateDevice::getService(GetParam());
         ASSERT_NE(dumpstate, nullptr) << "Could not get HIDL instance";
     }
 
+    void ToggleDeviceLogging(bool enable) {
+        Return<void> status = dumpstate->setDeviceLoggingEnabled(enable);
+        ASSERT_TRUE(status.isOk()) << "Status should be ok: " << status.description();
+
+        if (!dumpstate->ping().isOk()) {
+            ALOGW("IDumpstateDevice service appears to have exited lazily, attempting to get "
+                  "again");
+            GetService();
+        }
+
+        Return<bool> logging_enabled = dumpstate->getDeviceLoggingEnabled();
+        ASSERT_TRUE(logging_enabled.isOk())
+                << "Status should be ok: " << logging_enabled.description();
+        ASSERT_EQ(logging_enabled, enable)
+                << "Device logging should now be " << (enable ? "enabled" : "disabled");
+
+        if (!dumpstate->ping().isOk()) {
+            ALOGW("IDumpstateDevice service appears to have exited lazily, attempting to get "
+                  "again");
+            GetService();
+        }
+    }
+
+    void EnableDeviceLogging() { ToggleDeviceLogging(true); }
+
+    void DisableDeviceLogging() { ToggleDeviceLogging(false); }
+
     sp<IDumpstateDevice> dumpstate;
 };
 
 #define TEST_FOR_DUMPSTATE_MODE(name, body, mode) \
     TEST_P(DumpstateHidl1_1Test, name##_##mode) { body(DumpstateMode::mode); }
 
+// We use a macro to define individual test cases instead of hidl_enum_range<> because some HAL
+// implementations are lazy and may call exit() at the end of dumpstateBoard(), which would cause
+// DEAD_OBJECT errors after the first iteration. Separate cases re-get the service each time as part
+// of SetUp(), and also provide better separation of concerns when specific modes are problematic.
 #define TEST_FOR_ALL_DUMPSTATE_MODES(name, body)       \
     TEST_FOR_DUMPSTATE_MODE(name, body, FULL);         \
     TEST_FOR_DUMPSTATE_MODE(name, body, INTERACTIVE);  \
@@ -60,21 +96,51 @@
 
 constexpr uint64_t kDefaultTimeoutMillis = 30 * 1000;  // 30 seconds
 
+// Will only execute additional_assertions when status == expected.
+void AssertStatusForMode(const DumpstateMode mode, const Return<DumpstateStatus>& status,
+                         const DumpstateStatus expected,
+                         std::function<void()> additional_assertions = nullptr) {
+    ASSERT_TRUE(status.isOk()) << "Status should be ok and return a more specific DumpstateStatus: "
+                               << status.description();
+    if (mode == DumpstateMode::DEFAULT) {
+        ASSERT_EQ(expected, status) << "Required mode (DumpstateMode::" << toString(mode)
+                                    << "): status should be DumpstateStatus::" << toString(expected)
+                                    << ", but got DumpstateStatus::" << toString(status);
+    } else {
+        // The rest of the modes are optional to support, but they MUST return either the expected
+        // value or UNSUPPORTED_MODE.
+        ASSERT_TRUE(status == expected || status == DumpstateStatus::UNSUPPORTED_MODE)
+                << "Optional mode (DumpstateMode::" << toString(mode)
+                << "): status should be DumpstateStatus::" << toString(expected)
+                << " or DumpstateStatus::UNSUPPORTED_MODE, but got DumpstateStatus::"
+                << toString(status);
+    }
+    if (status == expected && additional_assertions != nullptr) {
+        additional_assertions();
+    }
+}
+
 // Negative test: make sure dumpstateBoard() doesn't crash when passed a null pointer.
 TEST_FOR_ALL_DUMPSTATE_MODES(TestNullHandle, [this](DumpstateMode mode) {
-    Return<void> status = dumpstate->dumpstateBoard_1_1(nullptr, mode, kDefaultTimeoutMillis);
+    EnableDeviceLogging();
 
-    ASSERT_TRUE(status.isOk()) << "Status should be ok: " << status.description();
+    Return<DumpstateStatus> status =
+            dumpstate->dumpstateBoard_1_1(nullptr, mode, kDefaultTimeoutMillis);
+
+    AssertStatusForMode(mode, status, DumpstateStatus::ILLEGAL_ARGUMENT);
 });
 
 // Negative test: make sure dumpstateBoard() ignores a handle with no FD.
 TEST_FOR_ALL_DUMPSTATE_MODES(TestHandleWithNoFd, [this](DumpstateMode mode) {
+    EnableDeviceLogging();
+
     native_handle_t* handle = native_handle_create(0, 0);
     ASSERT_NE(handle, nullptr) << "Could not create native_handle";
 
-    Return<void> status = dumpstate->dumpstateBoard_1_1(handle, mode, kDefaultTimeoutMillis);
+    Return<DumpstateStatus> status =
+            dumpstate->dumpstateBoard_1_1(handle, mode, kDefaultTimeoutMillis);
 
-    ASSERT_TRUE(status.isOk()) << "Status should be ok: " << status.description();
+    AssertStatusForMode(mode, status, DumpstateStatus::ILLEGAL_ARGUMENT);
 
     native_handle_close(handle);
     native_handle_delete(handle);
@@ -82,6 +148,8 @@
 
 // Positive test: make sure dumpstateBoard() writes something to the FD.
 TEST_FOR_ALL_DUMPSTATE_MODES(TestOk, [this](DumpstateMode mode) {
+    EnableDeviceLogging();
+
     // Index 0 corresponds to the read end of the pipe; 1 to the write end.
     int fds[2];
     ASSERT_EQ(0, pipe2(fds, O_NONBLOCK)) << errno;
@@ -90,12 +158,14 @@
     ASSERT_NE(handle, nullptr) << "Could not create native_handle";
     handle->data[0] = fds[1];
 
-    Return<void> status = dumpstate->dumpstateBoard_1_1(handle, mode, kDefaultTimeoutMillis);
-    ASSERT_TRUE(status.isOk()) << "Status should be ok: " << status.description();
+    Return<DumpstateStatus> status =
+            dumpstate->dumpstateBoard_1_1(handle, mode, kDefaultTimeoutMillis);
 
-    // Check that at least one byte was written
-    char buff;
-    ASSERT_EQ(1, read(fds[0], &buff, 1)) << "dumped nothing";
+    AssertStatusForMode(mode, status, DumpstateStatus::OK, [&fds]() {
+        // Check that at least one byte was written.
+        char buff;
+        ASSERT_EQ(1, read(fds[0], &buff, 1)) << "Dumped nothing";
+    });
 
     native_handle_close(handle);
     native_handle_delete(handle);
@@ -103,6 +173,8 @@
 
 // Positive test: make sure dumpstateBoard() doesn't crash with two FDs.
 TEST_FOR_ALL_DUMPSTATE_MODES(TestHandleWithTwoFds, [this](DumpstateMode mode) {
+    EnableDeviceLogging();
+
     int fds1[2];
     int fds2[2];
     ASSERT_EQ(0, pipe2(fds1, O_NONBLOCK)) << errno;
@@ -113,8 +185,17 @@
     handle->data[0] = fds1[1];
     handle->data[1] = fds2[1];
 
-    Return<void> status = dumpstate->dumpstateBoard_1_1(handle, mode, kDefaultTimeoutMillis);
-    ASSERT_TRUE(status.isOk()) << "Status should be ok: " << status.description();
+    Return<DumpstateStatus> status =
+            dumpstate->dumpstateBoard_1_1(handle, mode, kDefaultTimeoutMillis);
+
+    AssertStatusForMode(mode, status, DumpstateStatus::OK, [&fds1, &fds2]() {
+        // Check that at least one byte was written to one of the FDs.
+        char buff;
+        size_t read1 = read(fds1[0], &buff, 1);
+        size_t read2 = read(fds2[0], &buff, 1);
+        // Sometimes read returns -1, so we can't just add them together and expect >= 1.
+        ASSERT_TRUE(read1 == 1 || read2 == 1) << "Dumped nothing";
+    });
 
     native_handle_close(handle);
     native_handle_delete(handle);
@@ -122,6 +203,8 @@
 
 // Make sure dumpstateBoard_1_1 actually validates its arguments.
 TEST_P(DumpstateHidl1_1Test, TestInvalidModeArgument_Negative) {
+    EnableDeviceLogging();
+
     int fds[2];
     ASSERT_EQ(0, pipe2(fds, O_NONBLOCK)) << errno;
 
@@ -129,16 +212,21 @@
     ASSERT_NE(handle, nullptr) << "Could not create native_handle";
     handle->data[0] = fds[1];
 
-    Return<void> status = dumpstate->dumpstateBoard_1_1(handle, static_cast<DumpstateMode>(-100),
-                                                        kDefaultTimeoutMillis);
-    ASSERT_FALSE(status.isOk()) << "Status should not be ok with invalid mode param: "
-                                << status.description();
+    Return<DumpstateStatus> status = dumpstate->dumpstateBoard_1_1(
+            handle, static_cast<DumpstateMode>(-100), kDefaultTimeoutMillis);
+
+    ASSERT_TRUE(status.isOk()) << "Status should be ok and return a more specific DumpstateStatus: "
+                               << status.description();
+    ASSERT_EQ(status, DumpstateStatus::ILLEGAL_ARGUMENT)
+            << "Should return DumpstateStatus::ILLEGAL_ARGUMENT for invalid mode param";
 
     native_handle_close(handle);
     native_handle_delete(handle);
 }
 
 TEST_P(DumpstateHidl1_1Test, TestInvalidModeArgument_Undefined) {
+    EnableDeviceLogging();
+
     int fds[2];
     ASSERT_EQ(0, pipe2(fds, O_NONBLOCK)) << errno;
 
@@ -146,26 +234,84 @@
     ASSERT_NE(handle, nullptr) << "Could not create native_handle";
     handle->data[0] = fds[1];
 
-    Return<void> status = dumpstate->dumpstateBoard_1_1(handle, static_cast<DumpstateMode>(9001),
-                                                        kDefaultTimeoutMillis);
-    ASSERT_FALSE(status.isOk()) << "Status should not be ok with invalid mode param: "
-                                << status.description();
+    Return<DumpstateStatus> status = dumpstate->dumpstateBoard_1_1(
+            handle, static_cast<DumpstateMode>(9001), kDefaultTimeoutMillis);
+
+    ASSERT_TRUE(status.isOk()) << "Status should be ok and return a more specific DumpstateStatus: "
+                               << status.description();
+    ASSERT_EQ(status, DumpstateStatus::ILLEGAL_ARGUMENT)
+            << "Should return DumpstateStatus::ILLEGAL_ARGUMENT for invalid mode param";
 
     native_handle_close(handle);
     native_handle_delete(handle);
 }
 
-// Make sure toggling device logging doesn't crash.
-TEST_P(DumpstateHidl1_1Test, TestEnableDeviceLogging) {
-    Return<bool> status = dumpstate->setDeviceLoggingEnabled(true);
+// Positive test: make sure dumpstateBoard() from 1.0 doesn't fail.
+TEST_P(DumpstateHidl1_1Test, Test1_0MethodOk) {
+    EnableDeviceLogging();
+
+    int fds[2];
+    ASSERT_EQ(0, pipe2(fds, O_NONBLOCK)) << errno;
+
+    native_handle_t* handle = native_handle_create(1, 0);
+    ASSERT_NE(handle, nullptr) << "Could not create native_handle";
+    handle->data[0] = fds[1];
+
+    Return<void> status = dumpstate->dumpstateBoard(handle);
 
     ASSERT_TRUE(status.isOk()) << "Status should be ok: " << status.description();
+
+    // Check that at least one byte was written.
+    char buff;
+    ASSERT_EQ(1, read(fds[0], &buff, 1)) << "Dumped nothing";
+
+    native_handle_close(handle);
+    native_handle_delete(handle);
 }
 
-TEST_P(DumpstateHidl1_1Test, TestDisableDeviceLogging) {
-    Return<bool> status = dumpstate->setDeviceLoggingEnabled(false);
+// Make sure disabling device logging behaves correctly.
+TEST_FOR_ALL_DUMPSTATE_MODES(TestDeviceLoggingDisabled, [this](DumpstateMode mode) {
+    DisableDeviceLogging();
 
-    ASSERT_TRUE(status.isOk()) << "Status should be ok: " << status.description();
+    // Index 0 corresponds to the read end of the pipe; 1 to the write end.
+    int fds[2];
+    ASSERT_EQ(0, pipe2(fds, O_NONBLOCK)) << errno;
+
+    native_handle_t* handle = native_handle_create(1, 0);
+    ASSERT_NE(handle, nullptr) << "Could not create native_handle";
+    handle->data[0] = fds[1];
+
+    Return<DumpstateStatus> status =
+            dumpstate->dumpstateBoard_1_1(handle, mode, kDefaultTimeoutMillis);
+
+    AssertStatusForMode(mode, status, DumpstateStatus::DEVICE_LOGGING_NOT_ENABLED, [&fds]() {
+        // Check that nothing was written. Could return 0 or -1.
+        char buff;
+        ASSERT_NE(1, read(fds[0], &buff, 1)) << "Dumped something when device logging is disabled";
+    });
+
+    native_handle_close(handle);
+    native_handle_delete(handle);
+});
+
+// Double-enable is perfectly valid, but the second call shouldn't do anything.
+TEST_P(DumpstateHidl1_1Test, TestRepeatedEnable) {
+    EnableDeviceLogging();
+    EnableDeviceLogging();
+}
+
+// Double-disable is perfectly valid, but the second call shouldn't do anything.
+TEST_P(DumpstateHidl1_1Test, TestRepeatedDisable) {
+    DisableDeviceLogging();
+    DisableDeviceLogging();
+}
+
+// Toggling in short order is perfectly valid.
+TEST_P(DumpstateHidl1_1Test, TestRepeatedToggle) {
+    EnableDeviceLogging();
+    DisableDeviceLogging();
+    EnableDeviceLogging();
+    DisableDeviceLogging();
 }
 
 INSTANTIATE_TEST_SUITE_P(
diff --git a/health/storage/1.0/vts/functional/Android.bp b/health/storage/1.0/vts/functional/Android.bp
index a30cdde..4c703c5 100644
--- a/health/storage/1.0/vts/functional/Android.bp
+++ b/health/storage/1.0/vts/functional/Android.bp
@@ -22,6 +22,9 @@
     shared_libs: [
         "libhidlbase",
     ],
-    test_suites: ["general-tests", "vts-core"],
+    test_suites: [
+        "general-tests",
+        "vts-core",
+    ],
+    test_config: "VtsHalHealthStorageV1_0TargetTest.config",
 }
-
diff --git a/health/storage/1.0/vts/functional/VtsHalHealthStorageV1_0TargetTest.config b/health/storage/1.0/vts/functional/VtsHalHealthStorageV1_0TargetTest.config
new file mode 100644
index 0000000..0cd1c11
--- /dev/null
+++ b/health/storage/1.0/vts/functional/VtsHalHealthStorageV1_0TargetTest.config
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalHealthStorageV1_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalHealthStorageV1_0TargetTest->/data/local/tmp/VtsHalHealthStorageV1_0TargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalHealthStorageV1_0TargetTest" />
+        <option name="native-test-timeout" value="3m" />
+    </test>
+</configuration>
diff --git a/neuralnetworks/1.0/vts/functional/Android.bp b/neuralnetworks/1.0/vts/functional/Android.bp
index ba9fb45..03af671 100644
--- a/neuralnetworks/1.0/vts/functional/Android.bp
+++ b/neuralnetworks/1.0/vts/functional/Android.bp
@@ -14,13 +14,30 @@
 // limitations under the License.
 //
 
+cc_defaults {
+    name: "neuralnetworks_vts_functional_defaults",
+    defaults: ["VtsHalTargetTestDefaults"],
+    arch: {
+        x86: {
+            cflags: [ "-D_Float16=__fp16",
+                      "-Xclang", "-fnative-half-type",
+                      "-Xclang", "-fallow-half-arguments-and-returns" ],
+        },
+        x86_64: {
+            cflags: [ "-D_Float16=__fp16",
+                      "-Xclang", "-fnative-half-type",
+                      "-Xclang", "-fallow-half-arguments-and-returns" ],
+        },
+    },
+}
+
 cc_library_static {
     name: "VtsHalNeuralNetworksV1_0_utils",
     srcs: [
         "Callbacks.cpp",
         "Utils.cpp",
     ],
-    defaults: ["VtsHalTargetTestDefaults"],
+    defaults: ["neuralnetworks_vts_functional_defaults"],
     export_include_dirs: ["include"],
     shared_libs: [
         "libfmq",
@@ -42,7 +59,7 @@
 
 cc_test {
     name: "VtsHalNeuralnetworksV1_0TargetTest",
-    defaults: ["VtsHalTargetTestDefaults"],
+    defaults: ["neuralnetworks_vts_functional_defaults"],
     srcs: [
         "BasicTests.cpp",
         "TestAssertions.cpp",
diff --git a/neuralnetworks/1.1/vts/functional/Android.bp b/neuralnetworks/1.1/vts/functional/Android.bp
index 69e1761..9ba1925 100644
--- a/neuralnetworks/1.1/vts/functional/Android.bp
+++ b/neuralnetworks/1.1/vts/functional/Android.bp
@@ -16,7 +16,7 @@
 
 cc_test {
     name: "VtsHalNeuralnetworksV1_1TargetTest",
-    defaults: ["VtsHalTargetTestDefaults"],
+    defaults: ["neuralnetworks_vts_functional_defaults"],
     srcs: [
         "BasicTests.cpp",
         "TestAssertions.cpp",
diff --git a/neuralnetworks/1.2/types.hal b/neuralnetworks/1.2/types.hal
index e867120..993a105 100644
--- a/neuralnetworks/1.2/types.hal
+++ b/neuralnetworks/1.2/types.hal
@@ -3165,7 +3165,7 @@
      * * 8: An {@link OperandType::INT32} scalar, specifying the stride when
      *      walking through input in the ‘height’ dimension.
      * * 9: An {@link OperandType::INT32} scalar, specifying the number of
-            groups.
+     *      groups.
      * * 10: An {@link OperandType::INT32} scalar, and has to be one of the
      *       {@link FusedActivationFunc} values. Specifies the activation to
      *       invoke on the result.
diff --git a/neuralnetworks/1.2/vts/functional/Android.bp b/neuralnetworks/1.2/vts/functional/Android.bp
index fc727b7..7886910 100644
--- a/neuralnetworks/1.2/vts/functional/Android.bp
+++ b/neuralnetworks/1.2/vts/functional/Android.bp
@@ -16,7 +16,7 @@
 
 cc_library_static {
     name: "VtsHalNeuralNetworksV1_2Callbacks",
-    defaults: ["VtsHalTargetTestDefaults"],
+    defaults: ["neuralnetworks_vts_functional_defaults"],
     export_include_dirs: ["include"],
     srcs: [
         "Callbacks.cpp",
@@ -33,7 +33,7 @@
 
 cc_test {
     name: "VtsHalNeuralnetworksV1_2TargetTest",
-    defaults: ["VtsHalTargetTestDefaults"],
+    defaults: ["neuralnetworks_vts_functional_defaults"],
     srcs: [
         "BasicTests.cpp",
         "CompilationCachingTests.cpp",
diff --git a/neuralnetworks/1.2/vts/functional/BasicTests.cpp b/neuralnetworks/1.2/vts/functional/BasicTests.cpp
index 8e82c53..58d3c4a 100644
--- a/neuralnetworks/1.2/vts/functional/BasicTests.cpp
+++ b/neuralnetworks/1.2/vts/functional/BasicTests.cpp
@@ -79,6 +79,18 @@
     EXPECT_TRUE(ret.isOk());
 }
 
+// device name test
+TEST_P(NeuralnetworksHidlTest, GetDeviceNameTest) {
+    const std::string deviceName = getName(GetParam());
+    auto pos = deviceName.find('-');
+    EXPECT_NE(pos, std::string::npos);
+    // The separator should not be the first or last character.
+    EXPECT_NE(pos, 0);
+    EXPECT_NE(pos, deviceName.length() - 1);
+    // There should only be 1 separator.
+    EXPECT_EQ(std::string::npos, deviceName.find('-', pos + 1));
+}
+
 // device supported extensions test
 TEST_P(NeuralnetworksHidlTest, GetDeviceSupportedExtensionsTest) {
     Return<void> ret = kDevice->getSupportedExtensions(
diff --git a/neuralnetworks/1.3/IDevice.hal b/neuralnetworks/1.3/IDevice.hal
index 4931539..79f9c32 100644
--- a/neuralnetworks/1.3/IDevice.hal
+++ b/neuralnetworks/1.3/IDevice.hal
@@ -372,5 +372,5 @@
      */
     allocate(BufferDesc desc, vec<IPreparedModel> preparedModels, vec<BufferRole> inputRoles,
              vec<BufferRole> outputRoles)
-            generates (ErrorStatus status, IBuffer buffer, int32_t token);
+            generates (ErrorStatus status, IBuffer buffer, uint32_t token);
 };
diff --git a/neuralnetworks/1.3/types.hal b/neuralnetworks/1.3/types.hal
index ed577e4..c5dc08c 100644
--- a/neuralnetworks/1.3/types.hal
+++ b/neuralnetworks/1.3/types.hal
@@ -22,9 +22,9 @@
 import @1.0::RequestArgument;
 import @1.2::Model.ExtensionNameAndPrefix;
 import @1.2::Model.ExtensionTypeEncoding;
+import @1.2::Operand.ExtraParams;
 import @1.2::OperandType;
 import @1.2::OperationType;
-import @1.2::SymmPerChannelQuantParams;
 
 import android.hidl.safe_union@1.0::Monostate;
 
@@ -3253,7 +3253,7 @@
      * * 8: An {@link OperandType::INT32} scalar, specifying the stride when
      *      walking through input in the ‘height’ dimension.
      * * 9: An {@link OperandType::INT32} scalar, specifying the number of
-            groups.
+     *      groups.
      * * 10: An {@link OperandType::INT32} scalar, and has to be one of the
      *       {@link FusedActivationFunc} values. Specifies the activation to
      *       invoke on the result.
@@ -5343,27 +5343,7 @@
     /**
      * Additional parameters specific to a particular operand type.
      */
-    safe_union ExtraParams {
-       /**
-        * No additional parameters.
-        */
-       Monostate none;
-
-       /**
-        * Symmetric per-channel quantization parameters.
-        *
-        * Only applicable to operands of type TENSOR_QUANT8_SYMM_PER_CHANNEL.
-        */
-       SymmPerChannelQuantParams channelQuant;
-
-       /**
-        * Extension operand parameters.
-        *
-        * The framework treats this as an opaque data blob.
-        * The format is up to individual extensions.
-        */
-       vec<uint8_t> extension;
-    } extraParams;
+    @1.2::Operand.ExtraParams extraParams;
 };
 
 /**
@@ -5551,7 +5531,7 @@
          * Specifies a driver-managed buffer. It is the token returned from IDevice::allocate,
          * and is specific to the IDevice object.
          */
-        int32_t token;
+        uint32_t token;
     };
 
     /**
@@ -5573,7 +5553,7 @@
      * Time point of the steady clock (as from std::chrono::steady_clock)
      * measured in nanoseconds.
      */
-    uint64_t nanoseconds;
+    uint64_t nanosecondsSinceEpoch;
 };
 
 /**
diff --git a/neuralnetworks/1.3/types.t b/neuralnetworks/1.3/types.t
index d4351ec..3d0d02d 100644
--- a/neuralnetworks/1.3/types.t
+++ b/neuralnetworks/1.3/types.t
@@ -24,9 +24,9 @@
 import @1.0::RequestArgument;
 import @1.2::Model.ExtensionNameAndPrefix;
 import @1.2::Model.ExtensionTypeEncoding;
+import @1.2::Operand.ExtraParams;
 import @1.2::OperandType;
 import @1.2::OperationType;
-import @1.2::SymmPerChannelQuantParams;
 
 import android.hidl.safe_union@1.0::Monostate;
 
@@ -319,27 +319,7 @@
     /**
      * Additional parameters specific to a particular operand type.
      */
-    safe_union ExtraParams {
-       /**
-        * No additional parameters.
-        */
-       Monostate none;
-
-       /**
-        * Symmetric per-channel quantization parameters.
-        *
-        * Only applicable to operands of type TENSOR_QUANT8_SYMM_PER_CHANNEL.
-        */
-       SymmPerChannelQuantParams channelQuant;
-
-       /**
-        * Extension operand parameters.
-        *
-        * The framework treats this as an opaque data blob.
-        * The format is up to individual extensions.
-        */
-       vec<uint8_t> extension;
-    } extraParams;
+    @1.2::Operand.ExtraParams extraParams;
 };
 
 /**
@@ -527,7 +507,7 @@
          * Specifies a driver-managed buffer. It is the token returned from IDevice::allocate,
          * and is specific to the IDevice object.
          */
-        int32_t token;
+        uint32_t token;
     };
 
     /**
@@ -549,7 +529,7 @@
      * Time point of the steady clock (as from std::chrono::steady_clock)
      * measured in nanoseconds.
      */
-    uint64_t nanoseconds;
+    uint64_t nanosecondsSinceEpoch;
 };
 
 /**
diff --git a/neuralnetworks/1.3/vts/functional/Android.bp b/neuralnetworks/1.3/vts/functional/Android.bp
index 8e7e9b9..f936267 100644
--- a/neuralnetworks/1.3/vts/functional/Android.bp
+++ b/neuralnetworks/1.3/vts/functional/Android.bp
@@ -16,7 +16,7 @@
 
 cc_library_static {
     name: "VtsHalNeuralNetworksV1_3_utils",
-    defaults: ["VtsHalTargetTestDefaults"],
+    defaults: ["neuralnetworks_vts_functional_defaults"],
     export_include_dirs: ["include"],
     srcs: [
         "Callbacks.cpp",
@@ -35,7 +35,7 @@
 
 cc_test {
     name: "VtsHalNeuralnetworksV1_3TargetTest",
-    defaults: ["VtsHalTargetTestDefaults"],
+    defaults: ["neuralnetworks_vts_functional_defaults"],
     srcs: [
         "BasicTests.cpp",
         "CompilationCachingTests.cpp",
diff --git a/neuralnetworks/1.3/vts/functional/GeneratedTestHarness.cpp b/neuralnetworks/1.3/vts/functional/GeneratedTestHarness.cpp
index 8ea0b7e..82f34ff 100644
--- a/neuralnetworks/1.3/vts/functional/GeneratedTestHarness.cpp
+++ b/neuralnetworks/1.3/vts/functional/GeneratedTestHarness.cpp
@@ -122,15 +122,15 @@
     // Return {IBuffer object, token} if successful.
     // Return {nullptr, 0} if device memory is not supported.
     template <IOType ioType>
-    std::pair<sp<IBuffer>, int32_t> allocate(uint32_t index) {
-        std::pair<sp<IBuffer>, int32_t> buffer;
+    std::pair<sp<IBuffer>, uint32_t> allocate(uint32_t index) {
+        std::pair<sp<IBuffer>, uint32_t> buffer;
         allocateInternal<ioType>(index, &buffer);
         return buffer;
     }
 
   private:
     template <IOType ioType>
-    void allocateInternal(uint32_t index, std::pair<sp<IBuffer>, int32_t>* result) {
+    void allocateInternal(uint32_t index, std::pair<sp<IBuffer>, uint32_t>* result) {
         ASSERT_NE(result, nullptr);
 
         // Prepare arguments.
@@ -145,14 +145,14 @@
         // Allocate device memory.
         ErrorStatus status;
         sp<IBuffer> buffer;
-        int32_t token;
-        const auto ret = kDevice->allocate(
-                {}, {kPreparedModel}, inputRoles, outputRoles,
-                [&status, &buffer, &token](ErrorStatus error, const sp<IBuffer>& buf, int32_t tok) {
-                    status = error;
-                    buffer = buf;
-                    token = tok;
-                });
+        uint32_t token;
+        auto cb = [&status, &buffer, &token](ErrorStatus error, const sp<IBuffer>& buf,
+                                             uint32_t tok) {
+            status = error;
+            buffer = buf;
+            token = tok;
+        };
+        const auto ret = kDevice->allocate({}, {kPreparedModel}, inputRoles, outputRoles, cb);
 
         // Check allocation results.
         ASSERT_TRUE(ret.isOk());
@@ -217,7 +217,7 @@
             constRefSize += op.data.alignedSize();
         }
 
-        Operand::ExtraParams extraParams;
+        V1_2::Operand::ExtraParams extraParams;
         if (op.type == TestOperandType::TENSOR_QUANT8_SYMM_PER_CHANNEL) {
             extraParams.channelQuant(SymmPerChannelQuantParams{
                     .scales = op.channelQuant.scales, .channelDim = op.channelQuant.channelDim});
@@ -317,7 +317,7 @@
     // - [2+i, 2+i+o): Output device memories
     DeviceMemoryAllocator allocator(device, preparedModel, testModel);
     std::vector<sp<IBuffer>> buffers;
-    std::vector<int32_t> tokens;
+    std::vector<uint32_t> tokens;
 
     // Model inputs.
     hidl_vec<RequestArgument> inputs(testModel.inputIndexes.size());
diff --git a/neuralnetworks/1.3/vts/functional/QualityOfServiceTests.cpp b/neuralnetworks/1.3/vts/functional/QualityOfServiceTests.cpp
index 62ffcda..2f1e05c 100644
--- a/neuralnetworks/1.3/vts/functional/QualityOfServiceTests.cpp
+++ b/neuralnetworks/1.3/vts/functional/QualityOfServiceTests.cpp
@@ -64,11 +64,11 @@
                     std::chrono::time_point_cast<std::chrono::nanoseconds>(currentTime);
             const uint64_t nanosecondsSinceEpoch =
                     currentTimeInNanoseconds.time_since_epoch().count();
-            deadline.nanoseconds(nanosecondsSinceEpoch);
+            deadline.nanosecondsSinceEpoch(nanosecondsSinceEpoch);
         } break;
         case DeadlineBoundType::UNLIMITED: {
             uint64_t unlimited = std::numeric_limits<uint64_t>::max();
-            deadline.nanoseconds(unlimited);
+            deadline.nanosecondsSinceEpoch(unlimited);
         } break;
     }
     return deadline;
diff --git a/neuralnetworks/1.3/vts/functional/ValidateModel.cpp b/neuralnetworks/1.3/vts/functional/ValidateModel.cpp
index 1245432..0a35e2d 100644
--- a/neuralnetworks/1.3/vts/functional/ValidateModel.cpp
+++ b/neuralnetworks/1.3/vts/functional/ValidateModel.cpp
@@ -50,7 +50,7 @@
 
     OptionalTimePoint deadline;
     if (testDeadline) {
-        deadline.nanoseconds(std::numeric_limits<uint64_t>::max());
+        deadline.nanosecondsSinceEpoch(std::numeric_limits<uint64_t>::max());
     }
 
     sp<PreparedModelCallback> preparedModelCallback = new PreparedModelCallback();
diff --git a/neuralnetworks/1.3/vts/functional/ValidateRequest.cpp b/neuralnetworks/1.3/vts/functional/ValidateRequest.cpp
index 2fd9b64..71fe97f 100644
--- a/neuralnetworks/1.3/vts/functional/ValidateRequest.cpp
+++ b/neuralnetworks/1.3/vts/functional/ValidateRequest.cpp
@@ -61,7 +61,7 @@
 
     OptionalTimePoint deadline;
     if (testDeadline) {
-        deadline.nanoseconds(std::numeric_limits<uint64_t>::max());
+        deadline.nanosecondsSinceEpoch(std::numeric_limits<uint64_t>::max());
     }
 
     // asynchronous
diff --git a/radio/1.5/IRadioResponse.hal b/radio/1.5/IRadioResponse.hal
index aa8b526..543f9b5 100644
--- a/radio/1.5/IRadioResponse.hal
+++ b/radio/1.5/IRadioResponse.hal
@@ -20,6 +20,7 @@
 import @1.0::SendSmsResult;
 import @1.4::IRadioResponse;
 import @1.5::BarringInfo;
+import @1.5::CellIdentity;
 import @1.5::CellInfo;
 import @1.5::PersoSubstate;
 import @1.5::RegStateResult;
@@ -165,6 +166,7 @@
 
     /**
      * @param info Response info struct containing response type, serial no. and error
+     * @param cellIdentity CellIdentity for the barring infos.
      * @param barringInfos a vector of barring info for all barring service types
      *
      * Valid errors returned:
@@ -173,7 +175,8 @@
      *   RadioError:INTERNAL_ERR
      *   RadioError:MODEM_ERR
      */
-    oneway getBarringInfoResponse(RadioResponseInfo info, vec<BarringInfo> barringInfos);
+    oneway getBarringInfoResponse(RadioResponseInfo info, CellIdentity cellIdentity,
+            vec<BarringInfo> barringInfos);
 
     /**
      * @param info Response info struct containing response type, serial no. and error
diff --git a/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h b/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h
index ce7b1ab..6f65cbb 100644
--- a/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h
+++ b/radio/1.5/vts/functional/radio_hidl_hal_utils_v1_5.h
@@ -556,6 +556,7 @@
 
     Return<void> getBarringInfoResponse(
             const RadioResponseInfo& info,
+            const ::android::hardware::radio::V1_5::CellIdentity& cellIdentity,
             const ::android::hardware::hidl_vec<::android::hardware::radio::V1_5::BarringInfo>&
                     barringInfos);
 
diff --git a/radio/1.5/vts/functional/radio_response.cpp b/radio/1.5/vts/functional/radio_response.cpp
index 26401eb..17b294b 100644
--- a/radio/1.5/vts/functional/radio_response.cpp
+++ b/radio/1.5/vts/functional/radio_response.cpp
@@ -963,6 +963,7 @@
 
 Return<void> RadioResponse_v1_5::getBarringInfoResponse(
         const RadioResponseInfo& info,
+        const ::android::hardware::radio::V1_5::CellIdentity& /*cellIdentity*/,
         const ::android::hardware::hidl_vec<::android::hardware::radio::V1_5::BarringInfo>&
         /*barringInfos*/) {
     rspInfo = info;
diff --git a/tv/tuner/1.0/default/Frontend.cpp b/tv/tuner/1.0/default/Frontend.cpp
index 1e07edd..dd2f8a6 100644
--- a/tv/tuner/1.0/default/Frontend.cpp
+++ b/tv/tuner/1.0/default/Frontend.cpp
@@ -90,11 +90,66 @@
     return Result::SUCCESS;
 }
 
-Return<void> Frontend::getStatus(const hidl_vec<FrontendStatusType>& /* statusTypes */,
+Return<void> Frontend::getStatus(const hidl_vec<FrontendStatusType>& statusTypes,
                                  getStatus_cb _hidl_cb) {
     ALOGV("%s", __FUNCTION__);
 
     vector<FrontendStatus> statuses;
+    for (int i = 0; i < statusTypes.size(); i++) {
+        FrontendStatusType type = statusTypes[i];
+        FrontendStatus status;
+        // assign randomly selected values for testing.
+        switch (type) {
+            case FrontendStatusType::DEMOD_LOCK: {
+                status.isDemodLocked(true);
+                break;
+            }
+            case FrontendStatusType::SNR: {
+                status.snr(221);
+                break;
+            }
+            case FrontendStatusType::FEC: {
+                status.innerFec(FrontendInnerFec::FEC_2_9);  // value = 1 << 7
+                break;
+            }
+            case FrontendStatusType::MODULATION: {
+                FrontendModulationStatus modulationStatus;
+                modulationStatus.isdbt(FrontendIsdbtModulation::MOD_16QAM);  // value = 1 << 3
+                status.modulation(modulationStatus);
+                break;
+            }
+            case FrontendStatusType::PLP_ID: {
+                status.plpId(101);  // type uint8_t
+                break;
+            }
+            case FrontendStatusType::LAYER_ERROR: {
+                vector<bool> v = {false, true, true};
+                status.isLayerError(v);
+                break;
+            }
+            case FrontendStatusType::ATSC3_PLP_INFO: {
+                vector<FrontendStatusAtsc3PlpInfo> v;
+                FrontendStatusAtsc3PlpInfo info1{
+                        .plpId = 3,
+                        .isLocked = false,
+                        .uec = 313,
+                };
+                FrontendStatusAtsc3PlpInfo info2{
+                        .plpId = 5,
+                        .isLocked = true,
+                        .uec = 515,
+                };
+                v.push_back(info1);
+                v.push_back(info2);
+                status.plpInfo(v);
+                break;
+            }
+            default: {
+                continue;
+            }
+        }
+        statuses.push_back(status);
+    }
     _hidl_cb(Result::SUCCESS, statuses);
 
     return Void();
diff --git a/tv/tuner/1.0/default/Tuner.cpp b/tv/tuner/1.0/default/Tuner.cpp
index c6017f0..4fd3355 100644
--- a/tv/tuner/1.0/default/Tuner.cpp
+++ b/tv/tuner/1.0/default/Tuner.cpp
@@ -109,7 +109,37 @@
 Return<void> Tuner::getFrontendInfo(FrontendId /* frontendId */, getFrontendInfo_cb _hidl_cb) {
     ALOGV("%s", __FUNCTION__);
 
-    FrontendInfo info;
+    vector<FrontendStatusType> statusCaps = {
+            FrontendStatusType::DEMOD_LOCK,
+            FrontendStatusType::SNR,
+            FrontendStatusType::FEC,
+            FrontendStatusType::MODULATION,
+            FrontendStatusType::PLP_ID,
+            FrontendStatusType::LAYER_ERROR,
+            FrontendStatusType::ATSC3_PLP_INFO,
+    };
+    FrontendInfo::FrontendCapabilities frontendCaps;
+    FrontendIsdbtCapabilities isdbtCaps{
+            .modeCap = FrontendIsdbtMode::MODE_1 | FrontendIsdbtMode::MODE_2,
+            .bandwidthCap = (unsigned int)FrontendIsdbtBandwidth::BANDWIDTH_6MHZ,
+            .modulationCap = (unsigned int)FrontendIsdbtModulation::MOD_16QAM,
+            // ISDBT shares coderate and guard interval with DVBT
+            .coderateCap = FrontendDvbtCoderate::CODERATE_4_5 | FrontendDvbtCoderate::CODERATE_6_7,
+            .guardIntervalCap = (unsigned int)FrontendDvbtGuardInterval::INTERVAL_1_128,
+    };
+    frontendCaps.isdbtCaps(isdbtCaps);
+    // assign randomly selected values for testing.
+    FrontendInfo info{
+            .type = FrontendType::ISDBT,
+            .minFrequency = 139,
+            .maxFrequency = 1139,
+            .minSymbolRate = 45,
+            .maxSymbolRate = 1145,
+            .acquireRange = 30,
+            .exclusiveGroupId = 57,
+            .statusCaps = statusCaps,
+            .frontendCaps = frontendCaps,
+    };
 
     _hidl_cb(Result::SUCCESS, info);
     return Void();
diff --git a/tv/tuner/1.0/types.hal b/tv/tuner/1.0/types.hal
index 2eaab36..e4874f4 100644
--- a/tv/tuner/1.0/types.hal
+++ b/tv/tuner/1.0/types.hal
@@ -1425,18 +1425,6 @@
      */
     LAYER_ERROR,
     /**
-     * CN value by VBER.
-     */
-    VBER_CN,
-    /**
-     * CN value by LBER.
-     */
-    LBER_CN,
-    /**
-     * CN value by XER.
-     */
-    XER_CN,
-    /**
      * Moduration Error Ratio.
      */
     MER,
@@ -1559,21 +1547,6 @@
     vec<bool> isLayerError;
 
     /**
-     * CN value by VBER measured by 0.001 dB
-     */
-    int32_t vberCn;
-
-    /**
-     * CN value by LBER measured by 0.001 dB
-     */
-    int32_t lberCn;
-
-    /**
-     * CN value by XER measured by 0.001 dB
-     */
-    int32_t xerCn;
-
-    /**
      * MER value measured by 0.001 dB
      */
     int32_t mer;
diff --git a/wifi/supplicant/1.3/vts/functional/supplicant_sta_network_hidl_test.cpp b/wifi/supplicant/1.3/vts/functional/supplicant_sta_network_hidl_test.cpp
index 93eabd6..6be24bc 100644
--- a/wifi/supplicant/1.3/vts/functional/supplicant_sta_network_hidl_test.cpp
+++ b/wifi/supplicant/1.3/vts/functional/supplicant_sta_network_hidl_test.cpp
@@ -56,6 +56,8 @@
         supplicant_ =
             getSupplicant_1_3(supplicant_v1_3_instance_name_, isP2pOn_);
         EXPECT_TRUE(turnOnExcessiveLogging(supplicant_));
+        sta_iface_ = getSupplicantStaIface_1_3(supplicant_);
+        ASSERT_NE(nullptr, sta_iface_.get());
         sta_network_ = createSupplicantStaNetwork_1_3(supplicant_);
         ASSERT_NE(sta_network_.get(), nullptr);
     }