diff --git a/radio/1.2/Android.bp b/radio/1.2/Android.bp
index 56e4afd..3b2a01a 100644
--- a/radio/1.2/Android.bp
+++ b/radio/1.2/Android.bp
@@ -31,6 +31,8 @@
         "CellInfoLte",
         "CellInfoWcdma",
         "IncrementalResultsPeriodicityRange",
+        "IndicationFilter",
+        "LinkCapacityEstimate",
         "MaxSearchTimeRange",
         "NetworkScanRequest",
         "NetworkScanResult",
diff --git a/radio/1.2/IRadio.hal b/radio/1.2/IRadio.hal
index 6ae78a0..babe86f 100644
--- a/radio/1.2/IRadio.hal
+++ b/radio/1.2/IRadio.hal
@@ -17,6 +17,7 @@
 package android.hardware.radio@1.2;
 
 import @1.1::IRadio;
+import @1.1::RadioAccessNetworks;
 
 /**
  * This interface is used by telephony and telecom to talk to cellular radio.
@@ -37,4 +38,72 @@
      * Response function is IRadioResponse.startNetworkScanResponse()
      */
     oneway startNetworkScan_1_2(int32_t serial, NetworkScanRequest request);
+
+    /**
+     * Sets the indication filter.
+     *
+     * Prevents the reporting of specified unsolicited indications from the radio. This is used
+     * for power saving in instances when those indications are not needed. If unset, defaults to
+     * @1.2::IndicationFilter:ALL.
+     *
+     * @param serial Serial number of request.
+     * @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the
+     *        indications are enabled. See @1.2::IndicationFilter for the definition of each bit.
+     *
+     * Response callback is IRadioResponse.setIndicationFilterResponse()
+     */
+    oneway setIndicationFilter_1_2(int32_t serial, bitfield<IndicationFilter> indicationFilter);
+
+    /**
+     * Sets the signal strength reporting criteria.
+     *
+     * The resulting reporting criteria are the AND of all the supplied criteria.
+     *
+     * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria
+     * for that RAN are implementation-defined.
+     *
+     * Response callback is IRadioResponse.setSignalStrengthReportingCriteriaResponse().
+     *
+     * @param serial Serial number of request.
+     * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
+     *                     disables hysteresis.
+     * @param hysteresisDb An interval in dB defining the required magnitude change between reports.
+     *                     hysteresisDb must be smaller than the smallest threshold delta. An
+     *                     interval value of 0 disables hysteresis.
+     * @param thresholdsDbm A vector of trigger thresholds in dBm. A vector size of 0 disables the
+     *                      use of thresholds for reporting.
+     * @param ran The type of network for which to apply these thresholds.
+     */
+    oneway setSignalStrengthReportingCriteria(int32_t serial, int32_t hysteresisMs,
+            int32_t hysteresisDb, vec<int32_t> thresholdsDbm, RadioAccessNetworks ran);
+
+    /**
+     * Sets the link capacity reporting criteria.
+     *
+     * The resulting reporting criteria are the AND of all the supplied criteria.
+     *
+     * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria
+     * for that RAN are implementation-defined.
+     *
+     * Response callback is IRadioResponse.setLinkCapacityReportingCriteriaResponse().
+     *
+     * @param serial Serial number of request.
+     * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
+     *                     disables hysteresis.
+     * @param hysteresisDlKbps An interval in kbps defining the required magnitude change between DL
+     *                         reports. hysteresisDlKbps must be smaller than the smallest threshold
+     *                         delta. A value of 0 disables hysteresis.
+     * @param hysteresisUlKbps An interval in kbps defining the required magnitude change between UL
+     *                         reports. hysteresisUlKbps must be smaller than the smallest threshold
+     *                         delta. A value of 0 disables hysteresis.
+     * @param thresholdsDownlinkKbps A vector of trigger thresholds in kbps for downlink reports. A
+     *                               vector size of 0 disables the use of DL thresholds for
+     *                               reporting.
+     * @param thresholdsUplinkKbps A vector of trigger thresholds in kbps for uplink reports. A
+     *                             vector size of 0 disables the use of UL thresholds for reporting.
+     * @param ran The type of network for which to apply these thresholds.
+     */
+    oneway setLinkCapacityReportingCriteria(int32_t serial, int32_t hysteresisMs,
+            int32_t hysteresisDlKbps, int32_t hysteresisUlKbps, vec<int32_t> thresholdsDownlinkKbps,
+            vec<int32_t> thresholdsUplinkKbps, RadioAccessNetworks ran);
 };
diff --git a/radio/1.2/IRadioIndication.hal b/radio/1.2/IRadioIndication.hal
index 22f655c..2fb3038 100644
--- a/radio/1.2/IRadioIndication.hal
+++ b/radio/1.2/IRadioIndication.hal
@@ -37,4 +37,20 @@
      * @param records Current cell information known to radio
      */
      oneway cellInfoList_1_2(RadioIndicationType type, vec<CellInfo> records);
+
+    /**
+     * Indicates current link capacity estimate.
+     *
+     * This replaces @1.0::IRadioIndication.lceData(). The framework must be able to handle
+     * either this function or @1.0::IRadioIndication.lceData(). Implementations supporting
+     * v1.2 must call this function instead of lceData().
+     *
+     * This indication is sent whenever the reporting criteria, as set by
+     * @1.2::IRadio.setLinkCapacityReportingCriteria, are met and the indication is not
+     * suppressed by @1.2::IRadio.setIndicationFilter_1_2().
+     *
+     * @param type Type of radio indication
+     * @param lce LinkCapacityEstimate information as defined in types.hal
+     */
+    oneway currentLinkCapacityEstimate(RadioIndicationType type, LinkCapacityEstimate lce);
 };
diff --git a/radio/1.2/IRadioResponse.hal b/radio/1.2/IRadioResponse.hal
index a7ad30c..c356954 100644
--- a/radio/1.2/IRadioResponse.hal
+++ b/radio/1.2/IRadioResponse.hal
@@ -50,4 +50,26 @@
      *   RadioError:NONE
      */
     oneway getIccCardStatusResponse_1_2(RadioResponseInfo info, CardStatus cardStatus);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     */
+    oneway setSignalStrengthReportingCriteriaResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     */
+    oneway setLinkCapacityReportingCriteriaResponse(RadioResponseInfo info);
 };
diff --git a/radio/1.2/types.hal b/radio/1.2/types.hal
index 3aa2446..ca701bf7 100644
--- a/radio/1.2/types.hal
+++ b/radio/1.2/types.hal
@@ -64,6 +64,46 @@
     MAX = 10,
 };
 
+/**
+ * Overwritten from @1.0::IndicationFilter in order to redefine ALL. In the future, this should
+ * be extended instead of overwritten.
+ */
+enum IndicationFilter : int32_t {
+    NONE = 0,
+    ALL = ~0,
+    /**
+     * When this bit is set, modem must send the signal strength update through
+     * IRadioIndication.currentSignalStrength() when all criteria specified by
+     * IRadio.setSignalStrengthReportingCriteria() are met.
+     */
+    SIGNAL_STRENGTH = 1 << 0,
+    /**
+     * When this bit is set, modem must invoke IRadioIndication.networkStateChanged() when any field
+     * in VoiceRegStateResult or DataRegStateResult changes. When this bit is not set, modem must
+     * suppress IRadioIndication.networkStateChanged() when there are only changes from
+     * insignificant fields. Modem must invoke IRadioIndication.networkStateChanged() when
+     * significant fields are updated regardless of whether this bit is set.
+     *
+     * The following fields are considered significant: VoiceRegStateResult.regState,
+     * VoiceRegStateResult.rat, DataRegStateResult.regState, DataRegStateResult.rat.
+     */
+    FULL_NETWORK_STATE = 1 << 1,
+    /**
+     * When this bit is set, modem must send IRadioIndication.dataCallListChanged() whenever any
+     * field in ITypes.SetupDataCallResult changes. When this bit is not set, modem must suppress
+     * the indication when the only changed field is 'active' (for data dormancy). For all other
+     * field changes, the modem must send IRadioIndication.dataCallListChanged() regardless of
+     * whether this bit is set.
+     */
+    DATA_CALL_DORMANCY_CHANGED = 1 << 2,
+    /**
+     * When this bit is set, modem must send the link capacity update through
+     * IRadioIndication.currentLinkCapacityEstimate() when all criteria specified by
+     * IRadio.setLinkCapacityReportingCriteria() are met.
+     */
+    LINK_CAPACITY_ESTIMATE = 1 << 3,
+};
+
 struct NetworkScanRequest {
     ScanType type;
 
@@ -244,3 +284,14 @@
      */
     string iccid;
 };
+
+struct LinkCapacityEstimate {
+    /**
+     * Estimated downlink capacity in kbps.
+     */
+    uint32_t downlinkCapacityKbps;
+    /**
+     * Estimated uplink capacity in kbps.
+     */
+    uint32_t uplinkCapacityKbps;
+};