diff --git a/radio/1.0/IRadio.hal b/radio/1.0/IRadio.hal
index 0b1bf40..2976290 100644
--- a/radio/1.0/IRadio.hal
+++ b/radio/1.0/IRadio.hal
@@ -19,7 +19,7 @@
 import IRadioResponse;
 import IRadioIndication;
 
-/*
+/**
  * This interface is used by telephony & telecom to talk to cellular radio.
  * All the functions have minimum one parameter:
  * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
@@ -27,7 +27,7 @@
  * serial to different methods), multiple responses (one for each method call) must still be served.
  */
 interface IRadio {
-    /*
+    /**
      * Set response functions for radio requests & radio indications.
      *
      * @param radioResponse Object containing response functions
@@ -36,7 +36,7 @@
     setResponseFunctions(IRadioResponse radioResponse,
             IRadioIndication radioIndication);
 
-    /*
+    /**
      * Requests status of the ICC card
      *
      * @param serial Serial number of request.
@@ -46,7 +46,7 @@
      */
     oneway getIccCardStatus(int32_t serial);
 
-    /*
+    /**
      * Supplies ICC PIN. Only called if CardStatus has AppState.PIN state
      *
      * @param serial Serial number of request.
@@ -58,7 +58,7 @@
      */
     oneway supplyIccPinForApp(int32_t serial, string pin, string aid);
 
-    /*
+    /**
      * Supplies ICC PUK and new PIN.
      *
      * @param serial Serial number of request.
@@ -71,7 +71,7 @@
      */
     oneway supplyIccPukForApp(int32_t serial, string puk, string pin, string aid);
 
-    /*
+    /**
      * Supplies ICC PIN2. Only called following operation where SIM_PIN2 was
      * returned as a a failure from a previous operation.
      *
@@ -84,7 +84,7 @@
      */
     oneway supplyIccPin2ForApp(int32_t serial, string pin2, string aid);
 
-    /*
+    /**
      * Supplies ICC PUK2 and new PIN2.
      *
      * @param serial Serial number of request.
@@ -98,7 +98,7 @@
     oneway supplyIccPuk2ForApp(int32_t serial, string puk2, string pin2,
             string aid);
 
-    /*
+    /**
      * Supplies old ICC PIN and new PIN.
      *
      * @param serial Serial number of request.
@@ -112,7 +112,7 @@
     oneway changeIccPinForApp(int32_t serial, string oldPin, string newPin,
             string aid);
 
-    /*
+    /**
      * Supplies old ICC PIN2 and new PIN2.
      *
      * @param serial Serial number of request.
@@ -126,7 +126,7 @@
     oneway changeIccPin2ForApp(int32_t serial, string oldPin2, string newPin2,
             string aid);
 
-    /*
+    /**
      * Requests that network personalization be deactivated
      *
      * @param serial Serial number of request.
@@ -137,7 +137,7 @@
      */
     oneway supplyNetworkDepersonalization(int32_t serial, string netPin);
 
-    /*
+    /**
      * Requests current call list
      *
      * @param serial Serial number of request.
@@ -147,7 +147,7 @@
      */
     oneway getCurrentCalls(int32_t serial);
 
-    /*
+    /**
      * Initiate voice call.
      * This method is never used for supplementary service codes
      *
@@ -159,7 +159,7 @@
      */
     oneway dial(int32_t serial, Dial dialInfo);
 
-    /*
+    /**
      * Get the SIM IMSI
      * Only valid when radio state is "RADIO_STATE_ON"
      *
@@ -171,7 +171,7 @@
      */
     oneway getImsiForApp(int32_t serial, string aid);
 
-    /*
+    /**
      * Hang up a specific line (like AT+CHLD=1x)
      * After this HANGUP request returns, Radio must show the connection is NOT
      * active anymore in next requestGetCurrentCalls query.
@@ -184,7 +184,7 @@
      */
     oneway hangup(int32_t serial, int32_t gsmIndex);
 
-    /*
+    /**
      * Hang up waiting or held (like AT+CHLD=0)
      * After this HANGUP request returns, Radio must show the connection is NOT
      * active anymore in next getCurrentCalls() query.
@@ -196,7 +196,7 @@
      */
     oneway hangupWaitingOrBackground(int32_t serial);
 
-    /*
+    /**
      * Hang up waiting or held (like AT+CHLD=1)
      * After this HANGUP request returns, Radio must show the connection is NOT
      * active anymore in next getCurrentCalls query.
@@ -208,7 +208,7 @@
      */
     oneway hangupForegroundResumeBackground(int32_t serial);
 
-    /*
+    /**
      * Switch waiting or holding call and active call (like AT+CHLD=2)
      * State transitions must be as follows:
      *
@@ -229,7 +229,7 @@
      */
     oneway switchWaitingOrHoldingAndActive(int32_t serial);
 
-    /*
+    /**
      * Conference holding and active (like AT+CHLD=3)
      *
      * @param serial Serial number of request.
@@ -239,7 +239,7 @@
      */
     oneway conference(int32_t serial);
 
-    /*
+    /**
      * Send UDUB (user determined user busy) to ringing or
      * waiting call answer)
      *
@@ -250,7 +250,7 @@
      */
     oneway rejectCall(int32_t serial);
 
-    /*
+    /**
      * Requests the failure cause code for the most recently terminated call.
      *
      * @param serial Serial number of request.
@@ -260,7 +260,7 @@
      */
     oneway getLastCallFailCause(int32_t serial);
 
-    /*
+    /**
      * Requests current signal strength and associated information.
      * Must succeed if radio is on.
      *
@@ -270,7 +270,7 @@
      */
     oneway getSignalStrength(int32_t serial);
 
-    /*
+    /**
      * Request current voice registration state
      *
      * @param serial Serial number of request.
@@ -279,7 +279,7 @@
      */
     oneway getVoiceRegistrationState(int32_t serial);
 
-    /*
+    /**
      * Request current data registration state
      *
      * @param serial Serial number of request.
@@ -288,7 +288,7 @@
      */
     oneway getDataRegistrationState(int32_t serial);
 
-    /*
+    /**
      * Request current operator ONS or EONS
      *
      * @param serial Serial number of request.
@@ -297,7 +297,7 @@
      */
     oneway getOperator(int32_t serial);
 
-    /*
+    /**
      * Toggle radio on and off (for "airplane" mode)
      * If the radio is turned off/on the radio modem subsystem
      * is expected return to an initialized state. For instance,
@@ -311,7 +311,7 @@
      */
     oneway setRadioPower(int32_t serial, bool on);
 
-    /*
+    /**
      * Send a DTMF tone
      *
      * If the implementation is currently playing a tone requested via
@@ -325,7 +325,7 @@
      */
     oneway sendDtmf(int32_t serial, string s);
 
-    /*
+    /**
      * Send an SMS message
      *
      * @param serial Serial number of request.
@@ -339,7 +339,7 @@
      */
     oneway sendSms(int32_t serial, GsmSmsMessage message);
 
-    /*
+    /**
      * Send an SMS message. Identical to sendSms,
      * except that more messages are expected to be sent soon. If possible,
      * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command)
@@ -355,7 +355,7 @@
      */
     oneway sendSMSExpectMore(int32_t serial, GsmSmsMessage message);
 
-    /*
+    /**
      * Setup a packet data connection. If DataCallResponse.status
      * return DataCallFailCause:NONE it is added to the list of data calls and a
      * unsolDataCallListChanged() is sent. The call remains in the
@@ -391,7 +391,7 @@
             DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed,
             bool isRoaming);
 
-    /*
+    /**
      * Request ICC I/O operation.
      * This is similar to the TS 27.007 "restricted SIM" operation
      * where it assumes all of the EF selection must be done by the
@@ -411,7 +411,7 @@
      */
     oneway iccIOForApp(int32_t serial, IccIo iccIo);
 
-    /*
+    /**
      * Send a USSD message.
      *
      * If a USSD session already exists, the message must be sent in the
@@ -434,7 +434,7 @@
      */
     oneway sendUssd(int32_t serial, string ussd);
 
-    /*
+    /**
      * Cancel the current USSD session if one exists.
      *
      * @param serial Serial number of request.
@@ -443,7 +443,7 @@
      */
     oneway cancelPendingUssd(int32_t serial);
 
-    /*
+    /**
      * Gets current CLIR status
      *
      * @param serial Serial number of request.
@@ -452,7 +452,7 @@
      */
     oneway getClir(int32_t serial);
 
-    /*
+    /**
      * Set current CLIR status
      *
      * @param serial Serial number of request.
@@ -462,7 +462,7 @@
      */
     oneway setClir(int32_t serial, int32_t status);
 
-    /*
+    /**
      * Request call forward status.
      *
      * @param serial Serial number of request.
@@ -473,7 +473,7 @@
     oneway getCallForwardStatus(int32_t serial,
             CallForwardInfo callInfo);
 
-    /*
+    /**
      * Configure call forward rule
      *
      * @param serial Serial number of request.
@@ -483,7 +483,7 @@
      */
     oneway setCallForward(int32_t serial, CallForwardInfo callInfo);
 
-    /*
+    /**
      * Query current call waiting state
      *
      * @param serial Serial number of request.
@@ -493,7 +493,7 @@
      */
     oneway getCallWaiting(int32_t serial, int32_t serviceClass);
 
-    /*
+    /**
      * Configure current call waiting state
      *
      * @param serial Serial number of request.
@@ -505,7 +505,7 @@
     oneway setCallWaiting(int32_t serial, bool enable,
             int32_t serviceClass);
 
-    /*
+    /**
      * Acknowledge successful or failed receipt of SMS previously indicated
      * via unsolResponseNewSms
      *
@@ -521,7 +521,7 @@
     oneway acknowledgeLastIncomingGsmSms(int32_t serial, bool success,
             SmsAcknowledgeFailCause cause);
 
-    /*
+    /**
      * Answer incoming call
      * Must not be called for WAITING calls.
      * switchWaitingOrHoldingAndActive() must be used in this case
@@ -533,7 +533,7 @@
      */
     oneway acceptCall(int32_t serial);
 
-    /*
+    /**
      * Deactivate packet data connection and remove from the
      * data call list if RadioError:NONE is returned. Any other return
      * values must also try to remove the call from the list. An
@@ -551,7 +551,7 @@
     oneway deactivateDataCall(int32_t serial, int32_t cid,
             bool reasonRadioShutDown);
 
-    /*
+    /**
      * Query the status of a facility lock state
      *
      * @param serial Serial number of request.
@@ -567,7 +567,7 @@
     oneway getFacilityLockForApp(int32_t serial, string facility,
             string password, int32_t serviceClass, string appId);
 
-    /*
+    /**
      * Enable/disable one facility lock
      *
      * @param serial Serial number of request.
@@ -585,7 +585,7 @@
     oneway setFacilityLockForApp(int32_t serial, string facility, bool lockState,
             string password, int32_t serviceClass, string appId);
 
-    /*
+    /**
      * Change call barring facility password
      *
      * @param serial Serial number of request.
@@ -598,7 +598,7 @@
     oneway setBarringPassword(int32_t serial, string facility,
             string oldPassword, string newPassword);
 
-    /*
+    /**
      * Query current network selection mode
      *
      * @param serial Serial number of request.
@@ -607,7 +607,7 @@
      */
     oneway getNetworkSelectionMode(int32_t serial);
 
-    /*
+    /**
      * Specify that the network must be selected automatically.
      * This request must not respond until the new operator is selected and registered.
      *
@@ -617,7 +617,7 @@
      */
     oneway setNetworkSelectionModeAutomatic(int32_t serial);
 
-    /*
+    /**
      * Manually select a specified network.
      * This request must not respond until the new operator is selected and registered.
      *
@@ -628,7 +628,7 @@
      */
     oneway setNetworkSelectionModeManual(int32_t serial, string operatorNumeric);
 
-    /*
+    /**
      * Scans for available networks
      *
      * @param serial Serial number of request.
@@ -637,7 +637,7 @@
      */
     oneway getAvailableNetworks(int32_t serial);
 
-    /*
+    /**
      * Start playing a DTMF tone. Continue playing DTMF tone until
      * stopDtmf is received.
      * If a startDtmf() is received while a tone is currently playing,
@@ -650,7 +650,7 @@
      */
     oneway startDtmf(int32_t serial, string s);
 
-    /*
+    /**
      * Stop playing a currently playing DTMF tone.
      *
      * @param serial Serial number of request.
@@ -659,7 +659,7 @@
      */
     oneway stopDtmf(int32_t serial);
 
-    /*
+    /**
      * Return string value indicating baseband version, eg response from AT+CGMR
      *
      * @param serial Serial number of request.
@@ -668,7 +668,7 @@
      */
     oneway getBasebandVersion(int32_t serial);
 
-    /*
+    /**
      * Separate a party from a multiparty call placing the multiparty call
      * (less the specified party) on hold and leaving the specified party
      * as the only other member of the current (active) call
@@ -686,7 +686,7 @@
      */
     oneway separateConnection(int32_t serial, int32_t gsmIndex);
 
-    /*
+    /**
      * Turn on or off uplink (microphone) mute.
      * Must only be sent while voice call is active.
      * Must always be reset to "disable mute" when a new voice call is initiated
@@ -698,7 +698,7 @@
      */
     oneway setMute(int32_t serial, bool enable);
 
-    /*
+    /**
      * Queries the current state of the uplink mute setting
      *
      * @param serial Serial number of request.
@@ -707,7 +707,7 @@
      */
     oneway getMute(int32_t serial);
 
-    /*
+    /**
      * Queries the status of the CLIP supplementary service
      * (for MMI code "*#30#")
      *
@@ -717,7 +717,7 @@
      */
     oneway getClip(int32_t serial);
 
-    /*
+    /**
      * Returns the data call list. An entry is added when a
      * setupDataCall() is issued and removed on a
      * deactivateDataCall(). The list is emptied when
@@ -729,7 +729,7 @@
      */
     oneway getDataCallList(int32_t serial);
 
-    /*
+    /**
      * Enables/disables supplementary service related notifications from the network.
      * Notifications are reported via unsolSuppSvcNotification().
      *
@@ -740,7 +740,7 @@
      */
     oneway setSuppServiceNotifications(int32_t serial, bool enable);
 
-    /*
+    /**
      * Stores a SMS message to SIM memory.
      *
      * @param serial Serial number of request.
@@ -750,7 +750,7 @@
      */
     oneway writeSmsToSim(int32_t serial, SmsWriteArgs smsWriteArgs);
 
-    /*
+    /**
      * Deletes a SMS message from SIM memory.
      *
      * @param serial Serial number of request.
@@ -760,7 +760,7 @@
      */
     oneway deleteSmsOnSim(int32_t serial, int32_t index);
 
-    /*
+    /**
      * Assign a specified band for RF configuration.
      *
      * @param serial Serial number of request.
@@ -770,7 +770,7 @@
      */
     oneway setBandMode(int32_t serial, RadioBandMode mode);
 
-    /*
+    /**
      * Get the list of band modes supported by RF.
      *
      * @param serial Serial number of request.
@@ -779,7 +779,7 @@
      */
     oneway getAvailableBandModes(int32_t serial);
 
-    /*
+    /**
      * Requests to send a SAT/USAT envelope command to SIM.
      * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111
      *
@@ -790,7 +790,7 @@
      */
     oneway sendEnvelope(int32_t serial, string command);
 
-    /*
+    /**
      * Requests to send a terminal response to SIM for a received proactive command
      *
      * @param serial Serial number of request.
@@ -801,7 +801,7 @@
      */
     oneway sendTerminalResponseToSim(int32_t serial, string commandResponse);
 
-    /*
+    /**
      * When STK application gets stkCallSetup(), the call actually has
      * been initialized by mobile device already. (We could see the call has been in the 'call
      * list') So, STK application needs to accept/reject the call according to user
@@ -815,7 +815,7 @@
     oneway handleStkCallSetupRequestFromSim(int32_t serial,
             bool accept);
 
-    /*
+    /**
      * Connects the two calls and disconnects the subscriber from both calls.
      *
      * @param serial Serial number of request.
@@ -824,7 +824,7 @@
      */
     oneway explicitCallTransfer(int32_t serial);
 
-    /*
+    /**
      * Requests to set the preferred network type for searching and registering
      * (CS/PS domain, RAT, and operation mode)
      *
@@ -836,7 +836,7 @@
     oneway setPreferredNetworkType(int32_t serial,
             PreferredNetworkType nwType);
 
-    /*
+    /**
      * Query the preferred network type (CS/PS domain, RAT, and operation mode)
      * for searching and registering
      *
@@ -846,7 +846,7 @@
      */
     oneway getPreferredNetworkType(int32_t serial);
 
-    /*
+    /**
      * Request neighboring cell id in GSM network
      *
      * @param serial Serial number of request.
@@ -855,7 +855,7 @@
      */
     oneway getNeighboringCids(int32_t serial);
 
-    /*
+    /**
      * Enables/disables network state change notifications due to changes in
      * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA).
      * Basically +CREG=2 vs. +CREG=1 (TS 27.007).
@@ -869,7 +869,7 @@
      */
     oneway setLocationUpdates(int32_t serial, bool enable);
 
-    /*
+    /**
      * Request to set the location where the CDMA subscription shall
      * be retrieved
      *
@@ -881,7 +881,7 @@
     oneway setCdmaSubscriptionSource(int32_t serial,
             CdmaSubscriptionSource cdmaSub);
 
-    /*
+    /**
      * Request to set the roaming preferences in CDMA
      *
      * @param serial Serial number of request.
@@ -892,7 +892,7 @@
     oneway setCdmaRoamingPreference(int32_t serial,
             CdmaRoamingType type);
 
-    /*
+    /**
      * Request the actual setting of the roaming preferences in CDMA in the modem
      *
      * @param serial Serial number of request.
@@ -901,7 +901,7 @@
      */
     oneway getCdmaRoamingPreference(int32_t serial);
 
-    /*
+    /**
      * Request to set the TTY mode
      *
      * @param serial Serial number of request.
@@ -911,7 +911,7 @@
      */
     oneway setTTYMode(int32_t serial, TtyMode mode);
 
-    /*
+    /**
      * Request the setting of TTY mode
      *
      * @param serial Serial number of request.
@@ -920,7 +920,7 @@
      */
     oneway getTTYMode(int32_t serial);
 
-    /*
+    /**
      * Request to set the preferred voice privacy mode used in voice scrambling.
      *
      * @param serial Serial number of request.
@@ -931,7 +931,7 @@
      */
     oneway setPreferredVoicePrivacy(int32_t serial, bool enable);
 
-    /*
+    /**
      * Request the setting of preferred voice privacy mode.
      *
      * @param serial Serial number of request.
@@ -940,7 +940,7 @@
      */
     oneway getPreferredVoicePrivacy(int32_t serial);
 
-    /*
+    /**
      * Send FLASH command
      *
      * @param serial Serial number of request.
@@ -950,7 +950,7 @@
      */
     oneway sendCDMAFeatureCode(int32_t serial, string featureCode);
 
-    /*
+    /**
      * Send DTMF string
      *
      * @param serial Serial number of request.
@@ -962,7 +962,7 @@
      */
     oneway sendBurstDtmf(int32_t serial, string dtmf, int32_t on, int32_t off);
 
-    /*
+    /**
      * Send a CDMA SMS message
      *
      * @param serial Serial number of request.
@@ -972,7 +972,7 @@
      */
     oneway sendCdmaSms(int32_t serial, CdmaSmsMessage sms);
 
-    /*
+    /**
      * Acknowledge the success or failure in the receipt of SMS
      * previously indicated via responseCdmaNewSms()
      *
@@ -983,7 +983,7 @@
      */
     oneway acknowledgeLastIncomingCdmaSms(int32_t serial, CdmaSmsAck smsAck);
 
-    /*
+    /**
      * Request the setting of GSM/WCDMA Cell Broadcast SMS config.
      *
      * @param serial Serial number of request.
@@ -992,7 +992,7 @@
      */
     oneway getGsmBroadcastConfig(int32_t serial);
 
-    /*
+    /**
      * Set GSM/WCDMA Cell Broadcast SMS config
      *
      * @param serial Serial number of request.
@@ -1002,7 +1002,7 @@
      */
     oneway setGsmBroadcastConfig(int32_t serial, vec<GsmBroadcastSmsConfigInfo> configInfo);
 
-    /*
+    /**
      * Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS
      *
      * @param serial Serial number of request.
@@ -1013,7 +1013,7 @@
      */
     oneway setGsmBroadcastActivation(int32_t serial, bool activate);
 
-    /*
+    /**
      * Request the setting of CDMA Broadcast SMS config
      *
      * @param serial Serial number of request.
@@ -1022,7 +1022,7 @@
      */
     oneway getCdmaBroadcastConfig(int32_t serial);
 
-    /*
+    /**
      * Set CDMA Broadcast SMS config
      *
      * @param serial Serial number of request.
@@ -1032,7 +1032,7 @@
      */
     oneway setCdmaBroadcastConfig(int32_t serial, vec<CdmaBroadcastSmsConfigInfo> configInfo);
 
-    /*
+    /**
      * Enable or disable the reception of CDMA Cell Broadcast SMS
      *
      * @param serial Serial number of request.
@@ -1043,7 +1043,7 @@
      */
     oneway setCdmaBroadcastActivation(int32_t serial, bool activate);
 
-    /*
+    /**
      * Request the device MDN / H_SID / H_NID.
      * The request is only allowed when CDMA subscription is available. When CDMA
      * subscription is changed, application layer must re-issue the request to
@@ -1055,7 +1055,7 @@
      */
     oneway getCDMASubscription(int32_t serial);
 
-    /*
+    /**
      * Stores a CDMA SMS message to RUIM memory.
      *
      * @param serial Serial number of request.
@@ -1065,7 +1065,7 @@
      */
     oneway writeSmsToRuim(int32_t serial, CdmaSmsWriteArgs cdmaSms);
 
-    /*
+    /**
      * Deletes a CDMA SMS message from RUIM memory.
      *
      * @param serial Serial number of request.
@@ -1075,7 +1075,7 @@
      */
     oneway deleteSmsOnRuim(int32_t serial, int32_t index);
 
-    /*
+    /**
      * Request the device ESN / MEID / IMEI / IMEISV.
      * The request is always allowed and contains GSM and CDMA device identity.
      * When CDMA subscription is changed the ESN/MEID changes. The application
@@ -1087,7 +1087,7 @@
      */
     oneway getDeviceIdentity(int32_t serial);
 
-    /*
+    /**
      * Request the radio's system selection module to exit emergency
      * callback mode. Radio must not respond with SUCCESS until the modem has
      * completely exited from Emergency Callback Mode.
@@ -1098,7 +1098,7 @@
      */
     oneway exitEmergencyCallbackMode(int32_t serial);
 
-    /*
+    /**
      * Get the default Short Message Service Center address on the device.
      *
      * @param serial Serial number of request.
@@ -1107,7 +1107,7 @@
      */
     oneway getSmscAddress(int32_t serial);
 
-    /*
+    /**
      * Set the default Short Message Service Center address on the device.
      *
      * @param serial Serial number of request.
@@ -1117,7 +1117,7 @@
      */
     oneway setSmscAddress(int32_t serial, string smsc);
 
-    /*
+    /**
      * Indicates whether there is storage available for new SMS messages.
      *
      * @param serial Serial number of request.
@@ -1128,7 +1128,7 @@
      */
     oneway reportSmsMemoryStatus(int32_t serial, bool available);
 
-    /*
+    /**
      * Indicates that the StkService is running and is
      * ready to receive unsolicited stkXXXXX commands.
      *
@@ -1138,7 +1138,7 @@
      */
     oneway reportStkServiceIsRunning(int32_t serial);
 
-    /*
+    /**
      * Request to query the location where the CDMA subscription shall be retrieved.
      *
      * @param serial Serial number of request.
@@ -1147,7 +1147,7 @@
      */
     oneway getCdmaSubscriptionSource(int32_t serial);
 
-    /*
+    /**
      * Request the ISIM application on the UICC to perform AKA
      * challenge/response algorithm for IMS authentication
      *
@@ -1158,7 +1158,7 @@
      */
     oneway requestIsimAuthentication(int32_t serial, string challenge);
 
-    /*
+    /**
      * Acknowledge successful or failed receipt of SMS previously indicated
      * via unsol responseNewSms(), including acknowledgement TPDU to send
      * as the RP-User-Data element of the RP-ACK or RP-ERROR PDU.
@@ -1172,7 +1172,7 @@
      */
     oneway acknowledgeIncomingGsmSmsWithPdu(int32_t serial, bool success, string ackPdu);
 
-    /*
+    /**
      * Requests to send a SAT/USAT envelope command to SIM.
      * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111.
      *
@@ -1191,7 +1191,7 @@
      */
     oneway sendEnvelopeWithStatus(int32_t serial, string contents);
 
-    /*
+    /**
      * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only
      * when radio state is not RADIO_STATE_UNAVAILABLE
      *
@@ -1201,7 +1201,7 @@
      */
     oneway getVoiceRadioTechnology(int32_t serial);
 
-    /*
+    /**
      * Request all of the current cell information known to the radio. The radio
      * must return list of all current cells, including the neighboring cells. If for a particular
      * cell information isn't known then the appropriate unknown value will be returned.
@@ -1213,7 +1213,7 @@
      */
     oneway getCellInfoList(int32_t serial);
 
-    /*
+    /**
      * Sets the minimum time between when unsolicited cellInfoList() must be invoked.
      * A value of 0, means invoke cellInfoList() when any of the reported
      * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue
@@ -1226,7 +1226,7 @@
      */
     oneway setCellInfoListRate(int32_t serial, int32_t rate);
 
-    /*
+    /**
      * Set an apn to initial attach network
      *
      * @param serial Serial number of request.
@@ -1243,7 +1243,7 @@
     oneway setInitialAttachApn(int32_t serial, DataProfileInfo dataProfileInfo,
             bool modemCognitive, bool isRoaming);
 
-    /*
+    /**
      * Request current IMS registration state
      *
      * @param serial Serial number of request.
@@ -1252,7 +1252,7 @@
      */
     oneway getImsRegistrationState(int32_t serial);
 
-    /*
+    /**
      * Send a SMS message over IMS.
      * Based on the return error, caller decides to resend if sending sms
      * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry.
@@ -1265,7 +1265,7 @@
      */
     oneway sendImsSms(int32_t serial, ImsSmsMessage message);
 
-    /*
+    /**
      * Request APDU exchange on the basic channel. This command reflects TS 27.007
      * "generic SIM access" operation (+CSIM). The modem must ensure proper function
      * of GSM/CDMA, and filter commands appropriately. It must filter
@@ -1279,7 +1279,7 @@
      */
     oneway iccTransmitApduBasicChannel(int32_t serial, SimApdu message);
 
-    /*
+    /**
      * Open a new logical channel and select the given application. This command
      * reflects TS 27.007 "open logical channel" operation (+CCHO).
      *
@@ -1290,7 +1290,7 @@
      */
     oneway iccOpenLogicalChannel(int32_t serial, string aid);
 
-    /*
+    /**
      * Close a previously opened logical channel. This command reflects TS 27.007
      * "close logical channel" operation (+CCHC).
      *
@@ -1301,7 +1301,7 @@
      */
     oneway iccCloseLogicalChannel(int32_t serial, int32_t channelId);
 
-    /*
+    /**
      * Exchange APDUs with a UICC over a previously opened logical channel. This
      * command reflects TS 27.007 "generic logical channel access" operation
      * (+CGLA). The modem must filter channel management and SELECT by DF name
@@ -1314,7 +1314,7 @@
      */
     oneway iccTransmitApduLogicalChannel(int32_t serial, SimApdu message);
 
-    /*
+    /**
      * Read one of the radio NV items.
      * This is used for device configuration by some CDMA operators.
      *
@@ -1325,7 +1325,7 @@
      */
     oneway nvReadItem(int32_t serial, NvItem itemId);
 
-    /*
+    /**
      * Write one of the radio NV items.
      * This is used for device configuration by some CDMA operators.
      *
@@ -1336,7 +1336,7 @@
      */
     oneway nvWriteItem(int32_t serial, NvWriteItem item);
 
-    /*
+    /**
      * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage.
      * This is used for device configuration by some CDMA operators.
      *
@@ -1347,7 +1347,7 @@
      */
     oneway nvWriteCdmaPrl(int32_t serial, vec<uint8_t> prl);
 
-    /*
+    /**
      * Reset the radio NV configuration to the factory state.
      * This is used for device configuration by some CDMA operators.
      *
@@ -1358,7 +1358,7 @@
      */
     oneway nvResetConfig(int32_t serial, ResetNvType resetType);
 
-    /*
+    /**
      * Selection/de-selection of a subscription from a SIM card
      *
      * @param serial Serial number of request.
@@ -1368,7 +1368,7 @@
      */
     oneway setUiccSubscription(int32_t serial, SelectUiccSub uiccSub);
 
-    /*
+    /**
      * Tells the modem whether data calls are allowed or not
      *
      * @param serial Serial number of request.
@@ -1378,7 +1378,7 @@
      */
     oneway setDataAllowed(int32_t serial, bool allow);
 
-    /*
+    /**
      * Request all of the current hardware (modem and sim) associated with Radio.
      *
      * @param serial Serial number of request.
@@ -1387,7 +1387,7 @@
      */
     oneway getHardwareConfig(int32_t serial);
 
-    /*
+    /**
      * Returns the response of SIM Authentication through Radio challenge request.
      *
      * @param serial Serial number of request.
@@ -1401,7 +1401,7 @@
     oneway requestIccSimAuthentication(int32_t serial, int32_t authContext, string authData,
             string aid);
 
-    /*
+    /**
      * Set data profile in modem.
      * Modem must erase existed profiles from framework, and apply new profiles
      *
@@ -1416,7 +1416,7 @@
      */
     oneway setDataProfile(int32_t serial, vec<DataProfileInfo> profiles, bool isRoaming);
 
-    /*
+    /**
      * Device is shutting down. All further commands are ignored
      * and RADIO_NOT_AVAILABLE must be returned.
      *
@@ -1426,7 +1426,7 @@
      */
     oneway requestShutdown(int32_t serial);
 
-    /*
+    /**
      * Used to get phone radio capability.
      *
      * @param serial Serial number of request.
@@ -1435,7 +1435,7 @@
      */
     oneway getRadioCapability(int32_t serial);
 
-    /*
+    /**
      * Used to set the phones radio capability. Be VERY careful
      * using this request as it may cause some vendor modems to reset. Because
      * of the possible modem reset any radio commands after this one may not be
@@ -1448,7 +1448,7 @@
      */
     oneway setRadioCapability(int32_t serial, RadioCapability rc);
 
-    /*
+    /**
      * Start Link Capacity Estimate (LCE) service if supported by the radio.
      *
      * @param serial Serial number of request.
@@ -1459,7 +1459,7 @@
      */
     oneway startLceService(int32_t serial, int32_t reportInterval, bool pullMode);
 
-    /*
+    /**
      * Stop Link Capacity Estimate (LCE) service, the STOP operation must be
      * idempotent for the radio modem.
      *
@@ -1469,7 +1469,7 @@
      */
     oneway stopLceService(int32_t serial);
 
-    /*
+    /**
      * Pull LCE service for capacity information.
      *
      * @param serial Serial number of request.
@@ -1478,7 +1478,7 @@
      */
     oneway pullLceData(int32_t serial);
 
-    /*
+    /**
      * Get modem activity information for power consumption estimation.
      * Request clear-on-read statistics information that is used for
      * estimating the per-millisecond power consumption of the cellular
@@ -1490,7 +1490,7 @@
      */
     oneway getModemActivityInfo(int32_t serial);
 
-    /*
+    /**
      * Set carrier restrictions. Expected modem behavior:
      *  If never receives this command
      *  - Must allow all carriers
@@ -1514,7 +1514,7 @@
      */
     oneway setAllowedCarriers(int32_t serial, bool allAllowed, CarrierRestrictions carriers);
 
-    /*
+    /**
      * Get carrier restrictions.
      *
      * @param serial Serial number of request.
@@ -1523,7 +1523,7 @@
      */
     oneway getAllowedCarriers(int32_t serial);
 
-    /*
+    /**
      * Send the updated device state.
      * This is providing the device state information for the modem to perform power saving
      * strategies.
@@ -1536,7 +1536,7 @@
      */
     oneway sendDeviceState(int32_t serial, DeviceStateType deviceStateType, bool state);
 
-    /*
+    /**
      * Set the indication filter.
      * This is used to prevent unnecessary application processor wake up for power saving purposes
      * by suppressing the indications in certain scenarios.
@@ -1549,7 +1549,7 @@
      */
     oneway setIndicationFilter(int32_t serial, bitfield<IndicationFilter> indicationFilter);
 
-    /*
+    /**
      * Set SIM card power state.
      * Request is equivalent to inserting or removing the card.
      *
@@ -1563,7 +1563,7 @@
      */
     oneway setSimCardPower(int32_t serial, bool powerUp);
 
-    /*
+    /**
      * When response type received from a radio indication or radio response is
      * RadioIndicationType:UNSOLICITED_ACK_EXP or RadioResponseType:SOLICITED_ACK_EXP respectively,
      * acknowledge the receipt of those messages by sending responseAcknowledgement().