diff --git a/graphics/mapper/4.0/Android.bp b/graphics/mapper/4.0/Android.bp
new file mode 100644
index 0000000..42c4942
--- /dev/null
+++ b/graphics/mapper/4.0/Android.bp
@@ -0,0 +1,21 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.graphics.mapper@4.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+        support_system_process: true,
+    },
+    srcs: [
+        "types.hal",
+        "IMapper.hal",
+    ],
+    interfaces: [
+        "android.hardware.graphics.common@1.0",
+        "android.hardware.graphics.common@1.1",
+        "android.hardware.graphics.common@1.2",
+        "android.hidl.base@1.0",
+    ],
+    gen_java: false,
+}
diff --git a/graphics/mapper/4.0/IMapper.hal b/graphics/mapper/4.0/IMapper.hal
new file mode 100644
index 0000000..f5df04b
--- /dev/null
+++ b/graphics/mapper/4.0/IMapper.hal
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.graphics.mapper@4.0;
+
+import android.hardware.graphics.common@1.2::BufferUsage;
+import android.hardware.graphics.common@1.2::PixelFormat;
+import android.hardware.graphics.common@1.2::Rect;
+
+interface IMapper {
+    struct BufferDescriptorInfo {
+        /**
+         * The width specifies how many columns of pixels must be in the
+         * allocated buffer, but does not necessarily represent the offset in
+         * columns between the same column in adjacent rows. The rows may be
+         * padded.
+         */
+        uint32_t width;
+
+       /**
+        * The height specifies how many rows of pixels must be in the
+        * allocated buffer.
+        */
+        uint32_t height;
+
+       /**
+        * The number of image layers that must be in the allocated buffer.
+        */
+        uint32_t layerCount;
+
+        /** Buffer pixel format. */
+        PixelFormat format;
+
+        /**
+         * Buffer usage mask; valid flags can be found in the definition of
+         * BufferUsage.
+         */
+        bitfield<BufferUsage> usage;
+    };
+
+    struct Rect {
+        int32_t left;
+        int32_t top;
+        int32_t width;
+        int32_t height;
+    };
+
+    /**
+     * Creates a buffer descriptor. The descriptor can be used with IAllocator
+     * to allocate buffers.
+     *
+     * Since the buffer descriptor fully describes a buffer, any device
+     * dependent or device independent checks must be performed here whenever
+     * possible. Specifically, when layered buffers are not supported, this
+     * function must return `UNSUPPORTED` if `description.layers` is great than
+     * 1.
+     *
+     * @param description Attributes of the descriptor.
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_VALUE` if any of the specified attributes are invalid or
+     *       inconsistent.
+     *     - `NO_RESOURCES` if the creation cannot be fullfilled due to
+     *       unavailability of resources.
+     *     - `UNSUPPORTED` when any of the specified attributes are not
+     *       supported.
+     * @return descriptor Newly created buffer descriptor.
+     */
+    createDescriptor(BufferDescriptorInfo description)
+            generates (Error error,
+                       BufferDescriptor descriptor);
+
+    /**
+     * Imports a raw buffer handle to create an imported buffer handle for use
+     * with the rest of the mapper or with other in-process libraries.
+     *
+     * A buffer handle is considered raw when it is cloned (e.g., with
+     * `native_handle_clone()`) from another buffer handle locally, or when it
+     * is received from another HAL server/client or another process. A raw
+     * buffer handle must not be used to access the underlying graphic
+     * buffer. It must be imported to create an imported handle first.
+     *
+     * This function must at least validate the raw handle before creating the
+     * imported handle. It must also support importing the same raw handle
+     * multiple times to create multiple imported handles. The imported handle
+     * must be considered valid everywhere in the process, including in
+     * another instance of the mapper.
+     *
+     * Because of passthrough HALs, a raw buffer handle received from a HAL
+     * may actually have been imported in the process. importBuffer() must treat
+     * such a handle as if it is raw and must not return `BAD_BUFFER`. The
+     * returned handle is independent from the input handle as usual, and
+     * freeBuffer() must be called on it when it is no longer needed.
+     *
+     * @param rawHandle Raw buffer handle to import.
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_BUFFER` if the raw handle is invalid.
+     *     - `NO_RESOURCES` if the raw handle cannot be imported due to
+     *       unavailability of resources.
+     * @return buffer Imported buffer handle that has the type
+     *     `buffer_handle_t` which is a handle type.
+     */
+    importBuffer(handle rawHandle) generates (Error error, pointer buffer);
+
+    /**
+     * Frees a buffer handle. Buffer handles returned by importBuffer() must be
+     * freed with this function when no longer needed.
+     *
+     * This function must free up all resources allocated by importBuffer() for
+     * the imported handle. For example, if the imported handle was created
+     * with `native_handle_create()`, this function must call
+     * `native_handle_close()` and `native_handle_delete()`.
+     *
+     * @param buffer Imported buffer handle.
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_BUFFER` if the buffer is invalid.
+     */
+    freeBuffer(pointer buffer) generates (Error error);
+
+    /**
+     * Validates that the buffer can be safely accessed by a caller who assumes
+     * the specified @p description and @p stride. This must at least validate
+     * that the buffer size is large enough. Validating the buffer against
+     * individual buffer attributes is optional.
+     *
+     * @param buffer Buffer to validate against.
+     * @param description Attributes of the buffer.
+     * @param stride Stride returned by IAllocator::allocate().
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_BUFFER` if the buffer is invalid.
+     *     - `BAD_VALUE` if the buffer cannot be safely accessed.
+     */
+    validateBufferSize(pointer buffer,
+                       BufferDescriptorInfo description,
+                       uint32_t stride)
+            generates (Error error);
+
+    /**
+     * Calculates the transport size of a buffer. An imported buffer handle is a
+     * raw buffer handle with the process-local runtime data appended. This
+     * function, for example, allows a caller to omit the process-local runtime
+     * data at the tail when serializing the imported buffer handle.
+     *
+     * Note that a client might or might not omit the process-local runtime data
+     * when sending an imported buffer handle. The mapper must support both
+     * cases on the receiving end.
+     *
+     * @param buffer Buffer to get the transport size from.
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_BUFFER` if the buffer is invalid.
+     * @return numFds The number of file descriptors needed for transport.
+     * @return numInts The number of integers needed for transport.
+     */
+    getTransportSize(pointer buffer)
+            generates (Error error,
+                       uint32_t numFds,
+                       uint32_t numInts);
+
+    /**
+     * Locks the given buffer for the specified CPU usage.
+     *
+     * Locking the same buffer simultaneously from multiple threads is
+     * permitted, but if any of the threads attempt to lock the buffer for
+     * writing, the behavior is undefined, except that it must not cause
+     * process termination or block the client indefinitely. Leaving the
+     * buffer content in an indeterminate state or returning an error are both
+     * acceptable.
+     *
+     * 1D buffers (width = size in bytes, height = 1, pixel_format = BLOB) must
+     * "lock in place". The buffers must be directly accessible via mapping.
+     *
+     * The client must not modify the content of the buffer outside of
+     * @p accessRegion, and the device need not guarantee that content outside
+     * of @p accessRegion is valid for reading. The result of reading or writing
+     * outside of @p accessRegion is undefined, except that it must not cause
+     * process termination.
+     *
+     * On success, @p data must be filled with a pointer to the locked buffer
+     * memory. This address will represent the top-left corner of the entire
+     * buffer, even if @p accessRegion does not begin at the top-left corner.
+     *
+     * On success, bytesPerPixel must contain the number of bytes per pixel in
+     * the buffer. If the bytesPerPixel is unknown or variable, a value of -1
+     * should be returned. bytesPerStride must contain the bytes per stride of
+     * the buffer. If the bytesPerStride is unknown or variable, a value of -1
+     * should be returned.
+     *
+     * @param buffer Buffer to lock.
+     * @param cpuUsage CPU usage flags to request. See +ndk
+     *     libnativewindow#AHardwareBuffer_UsageFlags for possible values.
+     * @param accessRegion Portion of the buffer that the client intends to
+     *     access.
+     * @param acquireFence Handle containing a file descriptor referring to a
+     *     sync fence object, which will be signaled when it is safe for the
+     *     mapper to lock the buffer. @p acquireFence may be an empty fence if
+     *     it is already safe to lock.
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_BUFFER` if the buffer is invalid or is incompatible with this
+     *       function.
+     *     - `BAD_VALUE` if @p cpuUsage is 0, contains non-CPU usage flags, or
+     *       is incompatible with the buffer.
+     *     - `NO_RESOURCES` if the buffer cannot be locked at this time. Note
+     *       that locking may succeed at a later time.
+     * @return data CPU-accessible pointer to the buffer data.
+     * @return bytesPerPixel the number of bytes per pixel in the buffer
+     * @return bytesPerStride the number of bytes per stride of the buffer
+     */
+    lock(pointer buffer,
+         uint64_t cpuUsage,
+         Rect accessRegion,
+         handle acquireFence)
+            generates (Error error,
+                       pointer data,
+                       int32_t bytesPerPixel,
+                       int32_t bytesPerStride);
+
+    /**
+     * Locks a YCbCr buffer for the specified CPU usage.
+     *
+     * This is largely the same as lock(), except that instead of returning a
+     * pointer directly to the buffer data, it returns a `YCbCrLayout` struct
+     * describing how to access the data planes.
+     *
+     * This function must work on buffers with
+     * `AHARDWAREBUFFER_FORMAT_Y8Cb8Cr8_*` if supported by the device, as well
+     * as with any other formats requested by multimedia codecs when they are
+     * configured with a flexible-YUV-compatible color format.
+     *
+     * @param buffer Buffer to lock.
+     * @param cpuUsage CPU usage flags to request. See +ndk
+     *     libnativewindow#AHardwareBuffer_UsageFlags for possible values.
+     * @param accessRegion Portion of the buffer that the client intends to
+     *     access.
+     * @param acquireFence Handle containing a file descriptor referring to a
+     *     sync fence object, which will be signaled when it is safe for the
+     *     mapper to lock the buffer. @p acquireFence may be empty if it is
+     *     already safe to lock.
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_BUFFER` if the buffer is invalid or is incompatible with this
+     *       function.
+     *     - `BAD_VALUE` if @p cpuUsage is 0, contains non-CPU usage flags, or
+     *       is incompatible with the buffer.
+     *     - `NO_RESOURCES` if the buffer cannot be locked at this time. Note
+     *       that locking may succeed at a later time.
+     * @return layout Data layout of the locked buffer.
+     */
+    lockYCbCr(pointer buffer,
+              uint64_t cpuUsage,
+              Rect accessRegion,
+              handle acquireFence)
+            generates (Error error,
+                       YCbCrLayout layout);
+
+    /**
+     * Unlocks a buffer to indicate all CPU accesses to the buffer have
+     * completed.
+     *
+     * @param buffer Buffer to unlock.
+     * @return error Error status of the call, which may be
+     *     - `NONE` upon success.
+     *     - `BAD_BUFFER` if the buffer is invalid or not locked.
+     * @return releaseFence Handle containing a file descriptor referring to a
+     *     sync fence object. The sync fence object will be signaled when the
+     *     mapper has completed any pending work. @p releaseFence may be an
+     *     empty fence.
+     */
+    unlock(pointer buffer) generates (Error error, handle releaseFence);
+
+    /**
+     * Test whether the given BufferDescriptorInfo is allocatable.
+     *
+     * If this function returns true, it means that a buffer with the given
+     * description can be allocated on this implementation, unless resource
+     * exhaustion occurs. If this function returns false, it means that the
+     * allocation of the given description will never succeed.
+     *
+     * @param description the description of the buffer
+     * @return supported whether the description is supported
+     */
+    isSupported(BufferDescriptorInfo description)
+            generates (Error error,
+                       bool supported);
+
+};
+
diff --git a/graphics/mapper/4.0/types.hal b/graphics/mapper/4.0/types.hal
new file mode 100644
index 0000000..603b243
--- /dev/null
+++ b/graphics/mapper/4.0/types.hal
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.graphics.mapper@4.0;
+
+/**
+ * Error values that may be returned by a method of IAllocator or IMapper.
+ */
+enum Error : int32_t {
+    /**
+     * No error.
+     */
+    NONE            = 0,
+    /**
+     * Invalid BufferDescriptor.
+     */
+    BAD_DESCRIPTOR  = 1,
+    /**
+     * Invalid buffer handle.
+     */
+    BAD_BUFFER      = 2,
+    /**
+     * Invalid HardwareBufferDescription.
+     */
+    BAD_VALUE       = 3,
+    /**
+     * Resource unavailable.
+     */
+    NO_RESOURCES    = 5,
+    /**
+     * Permanent failure.
+     */
+    UNSUPPORTED     = 7,
+};
+
+/**
+ * A buffer descriptor is an implementation-defined opaque data returned by
+ * createDescriptor(). It describes the properties of a buffer and is consumed
+ * by the allocator.
+ */
+typedef vec<uint32_t> BufferDescriptor;
+
+/**
+ * Structure for describing YCbCr formats for consumption by applications.
+ * This is used with PixelFormat::YCBCR_*_888.
+ *
+ * Buffer chroma subsampling is defined in the format.
+ * e.g. PixelFormat::YCBCR_420_888 has subsampling 4:2:0.
+ *
+ * Buffers must have a 8 bit depth.
+ *
+ * y, cb, and cr point to the first byte of their respective planes.
+ *
+ * Stride describes the distance in bytes from the first value of one row of
+ * the image to the first value of the next row. It includes the width of the
+ * image plus padding.
+ * yStride is the stride of the luma plane.
+ * cStride is the stride of the chroma planes.
+ *
+ * chromaStep is the distance in bytes from one chroma pixel value to the
+ * next. This is 2 bytes for semiplanar (because chroma values are interleaved
+ * and each chroma value is one byte) and 1 for planar.
+ */
+struct YCbCrLayout {
+    pointer y;
+    pointer cb;
+    pointer cr;
+    uint32_t yStride;
+    uint32_t cStride;
+    uint32_t chromaStep;
+};
diff --git a/graphics/mapper/4.0/utils/OWNERS b/graphics/mapper/4.0/utils/OWNERS
new file mode 100644
index 0000000..96f6d51
--- /dev/null
+++ b/graphics/mapper/4.0/utils/OWNERS
@@ -0,0 +1,3 @@
+# Graphics team
+marissaw@google.com
+stoza@google.com
diff --git a/graphics/mapper/4.0/utils/vts/Android.bp b/graphics/mapper/4.0/utils/vts/Android.bp
new file mode 100644
index 0000000..e451584
--- /dev/null
+++ b/graphics/mapper/4.0/utils/vts/Android.bp
@@ -0,0 +1,34 @@
+//
+// Copyright (C) 2019 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_library_static {
+    name: "android.hardware.graphics.mapper@4.0-vts",
+    defaults: ["VtsHalTargetTestDefaults"],
+    srcs: ["MapperVts.cpp"],
+    cflags: [
+        "-O0",
+        "-g",
+    ],
+    static_libs: [
+        "android.hardware.graphics.allocator@4.0",
+        "android.hardware.graphics.mapper@4.0",
+    ],
+    export_static_lib_headers: [
+        "android.hardware.graphics.allocator@4.0",
+        "android.hardware.graphics.mapper@4.0",
+    ],
+    export_include_dirs: ["include"],
+}
diff --git a/graphics/mapper/4.0/utils/vts/MapperVts.cpp b/graphics/mapper/4.0/utils/vts/MapperVts.cpp
new file mode 100644
index 0000000..056b7c9
--- /dev/null
+++ b/graphics/mapper/4.0/utils/vts/MapperVts.cpp
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <mapper-vts/4.0/MapperVts.h>
+
+#include <VtsHalHidlTargetTestBase.h>
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace mapper {
+namespace V4_0 {
+namespace vts {
+
+Gralloc::Gralloc(const std::string& allocatorServiceName, const std::string& mapperServiceName,
+                 bool errOnFailure) {
+    if (errOnFailure) {
+        init(allocatorServiceName, mapperServiceName);
+    } else {
+        initNoErr(allocatorServiceName, mapperServiceName);
+    }
+}
+
+void Gralloc::init(const std::string& allocatorServiceName, const std::string& mapperServiceName) {
+    mAllocator = ::testing::VtsHalHidlTargetTestBase::getService<IAllocator>(allocatorServiceName);
+    ASSERT_NE(nullptr, mAllocator.get()) << "failed to get allocator service";
+
+    mMapper = ::testing::VtsHalHidlTargetTestBase::getService<IMapper>(mapperServiceName);
+    ASSERT_NE(nullptr, mMapper.get()) << "failed to get mapper service";
+    ASSERT_FALSE(mMapper->isRemote()) << "mapper is not in passthrough mode";
+}
+
+void Gralloc::initNoErr(const std::string& allocatorServiceName,
+                        const std::string& mapperServiceName) {
+    mAllocator = ::testing::VtsHalHidlTargetTestBase::getService<IAllocator>(allocatorServiceName);
+
+    mMapper = ::testing::VtsHalHidlTargetTestBase::getService<IMapper>(mapperServiceName);
+    if (mMapper.get()) {
+        ASSERT_FALSE(mMapper->isRemote()) << "mapper is not in passthrough mode";
+    }
+}
+
+Gralloc::~Gralloc() {
+    for (auto bufferHandle : mClonedBuffers) {
+        auto buffer = const_cast<native_handle_t*>(bufferHandle);
+        native_handle_close(buffer);
+        native_handle_delete(buffer);
+    }
+    mClonedBuffers.clear();
+
+    for (auto bufferHandle : mImportedBuffers) {
+        auto buffer = const_cast<native_handle_t*>(bufferHandle);
+        EXPECT_EQ(Error::NONE, mMapper->freeBuffer(buffer)) << "failed to free buffer " << buffer;
+    }
+    mImportedBuffers.clear();
+}
+
+sp<IAllocator> Gralloc::getAllocator() const {
+    return mAllocator;
+}
+
+std::string Gralloc::dumpDebugInfo() {
+    std::string debugInfo;
+    mAllocator->dumpDebugInfo([&](const auto& tmpDebugInfo) { debugInfo = tmpDebugInfo.c_str(); });
+
+    return debugInfo;
+}
+
+const native_handle_t* Gralloc::cloneBuffer(const hidl_handle& rawHandle) {
+    const native_handle_t* bufferHandle = native_handle_clone(rawHandle.getNativeHandle());
+    EXPECT_NE(nullptr, bufferHandle);
+
+    if (bufferHandle) {
+        mClonedBuffers.insert(bufferHandle);
+    }
+
+    return bufferHandle;
+}
+
+std::vector<const native_handle_t*> Gralloc::allocate(const BufferDescriptor& descriptor,
+                                                      uint32_t count, bool import,
+                                                      uint32_t* outStride) {
+    std::vector<const native_handle_t*> bufferHandles;
+    bufferHandles.reserve(count);
+    mAllocator->allocate(descriptor, count,
+                         [&](const auto& tmpError, const auto& tmpStride, const auto& tmpBuffers) {
+                             ASSERT_EQ(Error::NONE, tmpError) << "failed to allocate buffers";
+                             ASSERT_EQ(count, tmpBuffers.size()) << "invalid buffer array";
+
+                             for (uint32_t i = 0; i < count; i++) {
+                                 if (import) {
+                                     ASSERT_NO_FATAL_FAILURE(
+                                             bufferHandles.push_back(importBuffer(tmpBuffers[i])));
+                                 } else {
+                                     ASSERT_NO_FATAL_FAILURE(
+                                             bufferHandles.push_back(cloneBuffer(tmpBuffers[i])));
+                                 }
+                             }
+
+                             if (outStride) {
+                                 *outStride = tmpStride;
+                             }
+                         });
+
+    if (::testing::Test::HasFatalFailure()) {
+        bufferHandles.clear();
+    }
+
+    return bufferHandles;
+}
+
+const native_handle_t* Gralloc::allocate(const IMapper::BufferDescriptorInfo& descriptorInfo,
+                                         bool import, uint32_t* outStride) {
+    BufferDescriptor descriptor = createDescriptor(descriptorInfo);
+    if (::testing::Test::HasFatalFailure()) {
+        return nullptr;
+    }
+
+    auto buffers = allocate(descriptor, 1, import, outStride);
+    if (::testing::Test::HasFatalFailure()) {
+        return nullptr;
+    }
+
+    return buffers[0];
+}
+
+sp<IMapper> Gralloc::getMapper() const {
+    return mMapper;
+}
+
+BufferDescriptor Gralloc::createDescriptor(const IMapper::BufferDescriptorInfo& descriptorInfo) {
+    BufferDescriptor descriptor;
+    mMapper->createDescriptor(descriptorInfo, [&](const auto& tmpError, const auto& tmpDescriptor) {
+        ASSERT_EQ(Error::NONE, tmpError) << "failed to create descriptor";
+        descriptor = tmpDescriptor;
+    });
+
+    return descriptor;
+}
+
+const native_handle_t* Gralloc::importBuffer(const hidl_handle& rawHandle) {
+    const native_handle_t* bufferHandle = nullptr;
+    mMapper->importBuffer(rawHandle, [&](const auto& tmpError, const auto& tmpBuffer) {
+        ASSERT_EQ(Error::NONE, tmpError)
+                << "failed to import buffer %p" << rawHandle.getNativeHandle();
+        bufferHandle = static_cast<const native_handle_t*>(tmpBuffer);
+    });
+
+    if (bufferHandle) {
+        mImportedBuffers.insert(bufferHandle);
+    }
+
+    return bufferHandle;
+}
+
+void Gralloc::freeBuffer(const native_handle_t* bufferHandle) {
+    auto buffer = const_cast<native_handle_t*>(bufferHandle);
+
+    if (mImportedBuffers.erase(bufferHandle)) {
+        Error error = mMapper->freeBuffer(buffer);
+        ASSERT_EQ(Error::NONE, error) << "failed to free buffer " << buffer;
+    } else {
+        mClonedBuffers.erase(bufferHandle);
+        native_handle_close(buffer);
+        native_handle_delete(buffer);
+    }
+}
+
+void* Gralloc::lock(const native_handle_t* bufferHandle, uint64_t cpuUsage,
+                    const IMapper::Rect& accessRegion, int acquireFence, int32_t* outBytesPerPixel,
+                    int32_t* outBytesPerStride) {
+    auto buffer = const_cast<native_handle_t*>(bufferHandle);
+
+    NATIVE_HANDLE_DECLARE_STORAGE(acquireFenceStorage, 1, 0);
+    hidl_handle acquireFenceHandle;
+    if (acquireFence >= 0) {
+        auto h = native_handle_init(acquireFenceStorage, 1, 0);
+        h->data[0] = acquireFence;
+        acquireFenceHandle = h;
+    }
+
+    *outBytesPerPixel = -1;
+    *outBytesPerStride = -1;
+
+    void* data = nullptr;
+    mMapper->lock(buffer, cpuUsage, accessRegion, acquireFenceHandle,
+                  [&](const auto& tmpError, const auto& tmpData, int32_t tmpBytesPerPixel,
+                      int32_t tmpBytesPerStride) {
+                      ASSERT_EQ(Error::NONE, tmpError) << "failed to lock buffer " << buffer;
+                      data = tmpData;
+                      *outBytesPerPixel = tmpBytesPerPixel;
+                      *outBytesPerStride = tmpBytesPerStride;
+                  });
+
+    if (acquireFence >= 0) {
+        close(acquireFence);
+    }
+
+    return data;
+}
+
+YCbCrLayout Gralloc::lockYCbCr(const native_handle_t* bufferHandle, uint64_t cpuUsage,
+                               const IMapper::Rect& accessRegion, int acquireFence) {
+    auto buffer = const_cast<native_handle_t*>(bufferHandle);
+
+    NATIVE_HANDLE_DECLARE_STORAGE(acquireFenceStorage, 1, 0);
+    hidl_handle acquireFenceHandle;
+    if (acquireFence >= 0) {
+        auto h = native_handle_init(acquireFenceStorage, 1, 0);
+        h->data[0] = acquireFence;
+        acquireFenceHandle = h;
+    }
+
+    YCbCrLayout layout = {};
+    mMapper->lockYCbCr(buffer, cpuUsage, accessRegion, acquireFenceHandle,
+                       [&](const auto& tmpError, const auto& tmpLayout) {
+                           ASSERT_EQ(Error::NONE, tmpError)
+                                   << "failed to lockYCbCr buffer " << buffer;
+                           layout = tmpLayout;
+                       });
+
+    if (acquireFence >= 0) {
+        close(acquireFence);
+    }
+
+    return layout;
+}
+
+int Gralloc::unlock(const native_handle_t* bufferHandle) {
+    auto buffer = const_cast<native_handle_t*>(bufferHandle);
+
+    int releaseFence = -1;
+    mMapper->unlock(buffer, [&](const auto& tmpError, const auto& tmpReleaseFence) {
+        ASSERT_EQ(Error::NONE, tmpError) << "failed to unlock buffer " << buffer;
+
+        auto fenceHandle = tmpReleaseFence.getNativeHandle();
+        if (fenceHandle) {
+            ASSERT_EQ(0, fenceHandle->numInts) << "invalid fence handle " << fenceHandle;
+            if (fenceHandle->numFds == 1) {
+                releaseFence = dup(fenceHandle->data[0]);
+                ASSERT_LT(0, releaseFence) << "failed to dup fence fd";
+            } else {
+                ASSERT_EQ(0, fenceHandle->numFds) << " invalid fence handle " << fenceHandle;
+            }
+        }
+    });
+
+    return releaseFence;
+}
+
+bool Gralloc::validateBufferSize(const native_handle_t* bufferHandle,
+                                 const IMapper::BufferDescriptorInfo& descriptorInfo,
+                                 uint32_t stride) {
+    auto buffer = const_cast<native_handle_t*>(bufferHandle);
+
+    Error error = mMapper->validateBufferSize(buffer, descriptorInfo, stride);
+    return error == Error::NONE;
+}
+
+void Gralloc::getTransportSize(const native_handle_t* bufferHandle, uint32_t* outNumFds,
+                               uint32_t* outNumInts) {
+    auto buffer = const_cast<native_handle_t*>(bufferHandle);
+
+    *outNumFds = 0;
+    *outNumInts = 0;
+    mMapper->getTransportSize(buffer, [&](const auto& tmpError, const auto& tmpNumFds,
+                                          const auto& tmpNumInts) {
+        ASSERT_EQ(Error::NONE, tmpError) << "failed to get transport size";
+        ASSERT_GE(bufferHandle->numFds, int(tmpNumFds)) << "invalid numFds " << tmpNumFds;
+        ASSERT_GE(bufferHandle->numInts, int(tmpNumInts)) << "invalid numInts " << tmpNumInts;
+
+        *outNumFds = tmpNumFds;
+        *outNumInts = tmpNumInts;
+    });
+}
+
+bool Gralloc::isSupported(const IMapper::BufferDescriptorInfo& descriptorInfo) {
+    bool supported = false;
+    mMapper->isSupported(descriptorInfo, [&](const auto& tmpError, const auto& tmpSupported) {
+        ASSERT_EQ(Error::NONE, tmpError) << "failed to check is supported";
+        supported = tmpSupported;
+    });
+    return supported;
+}
+
+}  // namespace vts
+}  // namespace V4_0
+}  // namespace mapper
+}  // namespace graphics
+}  // namespace hardware
+}  // namespace android
diff --git a/graphics/mapper/4.0/utils/vts/include/mapper-vts/4.0/MapperVts.h b/graphics/mapper/4.0/utils/vts/include/mapper-vts/4.0/MapperVts.h
new file mode 100644
index 0000000..03ce764
--- /dev/null
+++ b/graphics/mapper/4.0/utils/vts/include/mapper-vts/4.0/MapperVts.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <string>
+#include <unordered_set>
+#include <vector>
+
+#include <android/hardware/graphics/allocator/4.0/IAllocator.h>
+#include <android/hardware/graphics/mapper/4.0/IMapper.h>
+#include <utils/StrongPointer.h>
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace mapper {
+namespace V4_0 {
+namespace vts {
+
+using android::hardware::graphics::allocator::V4_0::IAllocator;
+
+// A wrapper to IAllocator and IMapper.
+class Gralloc {
+  public:
+    Gralloc(const std::string& allocatorServiceName = "default",
+            const std::string& mapperServiceName = "default", bool errOnFailure = true);
+    ~Gralloc();
+
+    // IAllocator methods
+
+    sp<IAllocator> getAllocator() const;
+
+    std::string dumpDebugInfo();
+
+    // When import is false, this simply calls IAllocator::allocate. When import
+    // is true, the returned buffers are also imported into the mapper.
+    //
+    // Either case, the returned buffers must be freed with freeBuffer.
+    std::vector<const native_handle_t*> allocate(const BufferDescriptor& descriptor, uint32_t count,
+                                                 bool import = true, uint32_t* outStride = nullptr);
+    const native_handle_t* allocate(const IMapper::BufferDescriptorInfo& descriptorInfo,
+                                    bool import = true, uint32_t* outStride = nullptr);
+
+    // IMapper methods
+
+    sp<IMapper> getMapper() const;
+
+    BufferDescriptor createDescriptor(const IMapper::BufferDescriptorInfo& descriptorInfo);
+
+    const native_handle_t* importBuffer(const hidl_handle& rawHandle);
+    void freeBuffer(const native_handle_t* bufferHandle);
+
+    // We use fd instead of hidl_handle in these functions to pass fences
+    // in and out of the mapper.  The ownership of the fd is always transferred
+    // with each of these functions.
+    void* lock(const native_handle_t* bufferHandle, uint64_t cpuUsage,
+               const IMapper::Rect& accessRegion, int acquireFence, int32_t* outBytesPerPixel,
+               int32_t* outBytesPerStride);
+    YCbCrLayout lockYCbCr(const native_handle_t* bufferHandle, uint64_t cpuUsage,
+                          const IMapper::Rect& accessRegion, int acquireFence);
+    int unlock(const native_handle_t* bufferHandle);
+
+    bool validateBufferSize(const native_handle_t* bufferHandle,
+                            const IMapper::BufferDescriptorInfo& descriptorInfo, uint32_t stride);
+    void getTransportSize(const native_handle_t* bufferHandle, uint32_t* outNumFds,
+                          uint32_t* outNumInts);
+
+    bool isSupported(const IMapper::BufferDescriptorInfo& descriptorInfo);
+
+  private:
+    void init(const std::string& allocatorServiceName, const std::string& mapperServiceName);
+
+    // initialize without checking for failure to get service
+    void initNoErr(const std::string& allocatorServiceName, const std::string& mapperServiceName);
+    const native_handle_t* cloneBuffer(const hidl_handle& rawHandle);
+
+    sp<IAllocator> mAllocator;
+    sp<IMapper> mMapper;
+
+    // Keep track of all cloned and imported handles.  When a test fails with
+    // ASSERT_*, the destructor will free the handles for the test.
+    std::unordered_set<const native_handle_t*> mClonedBuffers;
+    std::unordered_set<const native_handle_t*> mImportedBuffers;
+};
+
+}  // namespace vts
+}  // namespace V4_0
+}  // namespace mapper
+}  // namespace graphics
+}  // namespace hardware
+}  // namespace android
diff --git a/graphics/mapper/4.0/vts/OWNERS b/graphics/mapper/4.0/vts/OWNERS
new file mode 100644
index 0000000..96f6d51
--- /dev/null
+++ b/graphics/mapper/4.0/vts/OWNERS
@@ -0,0 +1,3 @@
+# Graphics team
+marissaw@google.com
+stoza@google.com
diff --git a/graphics/mapper/4.0/vts/functional/Android.bp b/graphics/mapper/4.0/vts/functional/Android.bp
new file mode 100644
index 0000000..a90ee0c
--- /dev/null
+++ b/graphics/mapper/4.0/vts/functional/Android.bp
@@ -0,0 +1,30 @@
+//
+// Copyright 2019 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_test {
+    name: "VtsHalGraphicsMapperV4_0TargetTest",
+    defaults: ["VtsHalTargetTestDefaults"],
+    srcs: ["VtsHalGraphicsMapperV4_0TargetTest.cpp"],
+    static_libs: [
+        "android.hardware.graphics.allocator@4.0",
+        "android.hardware.graphics.common@1.0",
+        "android.hardware.graphics.common@1.1",
+        "android.hardware.graphics.common@1.2",
+        "android.hardware.graphics.mapper@4.0",
+        "android.hardware.graphics.mapper@4.0-vts",
+    ],
+    test_suites: ["general-tests"],
+}
diff --git a/graphics/mapper/4.0/vts/functional/VtsHalGraphicsMapperV4_0TargetTest.cpp b/graphics/mapper/4.0/vts/functional/VtsHalGraphicsMapperV4_0TargetTest.cpp
new file mode 100644
index 0000000..706c658
--- /dev/null
+++ b/graphics/mapper/4.0/vts/functional/VtsHalGraphicsMapperV4_0TargetTest.cpp
@@ -0,0 +1,494 @@
+/*
+ * Copyright 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "VtsHalGraphicsMapperV4_0TargetTest"
+
+#include <chrono>
+#include <thread>
+#include <vector>
+
+#include <VtsHalHidlTargetTestBase.h>
+#include <android-base/logging.h>
+#include <mapper-vts/4.0/MapperVts.h>
+
+namespace android {
+namespace hardware {
+namespace graphics {
+namespace mapper {
+namespace V4_0 {
+namespace vts {
+namespace {
+
+using android::hardware::graphics::common::V1_2::BufferUsage;
+using android::hardware::graphics::common::V1_2::PixelFormat;
+
+// Test environment for graphics.mapper.
+class GraphicsMapperHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
+  public:
+    // get the test environment singleton
+    static GraphicsMapperHidlEnvironment* Instance() {
+        static GraphicsMapperHidlEnvironment* instance = new GraphicsMapperHidlEnvironment;
+        return instance;
+    }
+
+    virtual void registerTestServices() override {
+        registerTestService<IAllocator>();
+        registerTestService<IMapper>();
+    }
+};
+
+class GraphicsMapperHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+  protected:
+    void SetUp() override {
+        ASSERT_NO_FATAL_FAILURE(
+                mGralloc = std::make_unique<Gralloc>(
+                        GraphicsMapperHidlEnvironment::Instance()->getServiceName<IAllocator>(),
+                        GraphicsMapperHidlEnvironment::Instance()->getServiceName<IMapper>()));
+
+        mDummyDescriptorInfo.width = 64;
+        mDummyDescriptorInfo.height = 64;
+        mDummyDescriptorInfo.layerCount = 1;
+        mDummyDescriptorInfo.format = PixelFormat::RGBA_8888;
+        mDummyDescriptorInfo.usage =
+                static_cast<uint64_t>(BufferUsage::CPU_WRITE_OFTEN | BufferUsage::CPU_READ_OFTEN);
+    }
+
+    void TearDown() override {}
+
+    std::unique_ptr<Gralloc> mGralloc;
+    IMapper::BufferDescriptorInfo mDummyDescriptorInfo{};
+};
+
+/**
+ * Test IAllocator::dumpDebugInfo by calling it.
+ */
+TEST_F(GraphicsMapperHidlTest, AllocatorDumpDebugInfo) {
+    mGralloc->dumpDebugInfo();
+}
+
+/**
+ * Test IAllocator::allocate with valid buffer descriptors.
+ */
+TEST_F(GraphicsMapperHidlTest, AllocatorAllocate) {
+    BufferDescriptor descriptor;
+    ASSERT_NO_FATAL_FAILURE(descriptor = mGralloc->createDescriptor(mDummyDescriptorInfo));
+
+    for (uint32_t count = 0; count < 5; count++) {
+        std::vector<const native_handle_t*> bufferHandles;
+        uint32_t stride;
+        ASSERT_NO_FATAL_FAILURE(bufferHandles =
+                                        mGralloc->allocate(descriptor, count, false, &stride));
+
+        if (count >= 1) {
+            EXPECT_LE(mDummyDescriptorInfo.width, stride) << "invalid buffer stride";
+        }
+
+        for (auto bufferHandle : bufferHandles) {
+            mGralloc->freeBuffer(bufferHandle);
+        }
+    }
+}
+
+/**
+ * Test IAllocator::allocate with invalid buffer descriptors.
+ */
+TEST_F(GraphicsMapperHidlTest, AllocatorAllocateNegative) {
+    // this assumes any valid descriptor is non-empty
+    BufferDescriptor descriptor;
+    mGralloc->getAllocator()->allocate(descriptor, 1,
+                                       [&](const auto& tmpError, const auto&, const auto&) {
+                                           EXPECT_EQ(Error::BAD_DESCRIPTOR, tmpError);
+                                       });
+}
+
+/**
+ * Test IAllocator::allocate does not leak.
+ */
+TEST_F(GraphicsMapperHidlTest, AllocatorAllocateNoLeak) {
+    auto info = mDummyDescriptorInfo;
+    info.width = 1024;
+    info.height = 1024;
+
+    for (int i = 0; i < 2048; i++) {
+        auto bufferHandle = mGralloc->allocate(info, false);
+        mGralloc->freeBuffer(bufferHandle);
+    }
+}
+
+/**
+ * Test that IAllocator::allocate is thread-safe.
+ */
+TEST_F(GraphicsMapperHidlTest, AllocatorAllocateThreaded) {
+    BufferDescriptor descriptor;
+    ASSERT_NO_FATAL_FAILURE(descriptor = mGralloc->createDescriptor(mDummyDescriptorInfo));
+
+    std::atomic<bool> timeUp(false);
+    std::atomic<uint64_t> allocationCount(0);
+    auto threadLoop = [&]() {
+        while (!timeUp) {
+            mGralloc->getAllocator()->allocate(
+                    descriptor, 1,
+                    [&](const auto&, const auto&, const auto&) { allocationCount++; });
+        }
+    };
+
+    std::vector<std::thread> threads;
+    for (int i = 0; i < 8; i++) {
+        threads.push_back(std::thread(threadLoop));
+    }
+
+    std::this_thread::sleep_for(std::chrono::seconds(3));
+    timeUp = true;
+    LOG(VERBOSE) << "Made " << allocationCount << " threaded allocations";
+
+    for (auto& thread : threads) {
+        thread.join();
+    }
+}
+
+/**
+ * Test IMapper::createDescriptor with valid descriptor info.
+ */
+TEST_F(GraphicsMapperHidlTest, CreateDescriptorBasic) {
+    ASSERT_NO_FATAL_FAILURE(mGralloc->createDescriptor(mDummyDescriptorInfo));
+}
+
+/**
+ * Test IMapper::createDescriptor with invalid descriptor info.
+ */
+TEST_F(GraphicsMapperHidlTest, CreateDescriptorNegative) {
+    auto info = mDummyDescriptorInfo;
+    info.width = 0;
+    mGralloc->getMapper()->createDescriptor(info, [&](const auto& tmpError, const auto&) {
+        EXPECT_EQ(Error::BAD_VALUE, tmpError) << "createDescriptor did not fail with BAD_VALUE";
+    });
+}
+
+/**
+ * Test IMapper::importBuffer and IMapper::freeBuffer with allocated buffers.
+ */
+TEST_F(GraphicsMapperHidlTest, ImportFreeBufferBasic) {
+    const native_handle_t* bufferHandle;
+    ASSERT_NO_FATAL_FAILURE(bufferHandle = mGralloc->allocate(mDummyDescriptorInfo, true));
+    ASSERT_NO_FATAL_FAILURE(mGralloc->freeBuffer(bufferHandle));
+}
+
+/**
+ * Test IMapper::importBuffer and IMapper::freeBuffer with cloned buffers.
+ */
+TEST_F(GraphicsMapperHidlTest, ImportFreeBufferClone) {
+    const native_handle_t* clonedBufferHandle;
+    ASSERT_NO_FATAL_FAILURE(clonedBufferHandle = mGralloc->allocate(mDummyDescriptorInfo, false));
+
+    // A cloned handle is a raw handle. Check that we can import it multiple
+    // times.
+    const native_handle_t* importedBufferHandles[2];
+    ASSERT_NO_FATAL_FAILURE(importedBufferHandles[0] = mGralloc->importBuffer(clonedBufferHandle));
+    ASSERT_NO_FATAL_FAILURE(importedBufferHandles[1] = mGralloc->importBuffer(clonedBufferHandle));
+    ASSERT_NO_FATAL_FAILURE(mGralloc->freeBuffer(importedBufferHandles[0]));
+    ASSERT_NO_FATAL_FAILURE(mGralloc->freeBuffer(importedBufferHandles[1]));
+
+    ASSERT_NO_FATAL_FAILURE(mGralloc->freeBuffer(clonedBufferHandle));
+}
+
+/**
+ * Test IMapper::importBuffer and IMapper::freeBuffer cross mapper instances.
+ */
+TEST_F(GraphicsMapperHidlTest, ImportFreeBufferSingleton) {
+    const native_handle_t* rawHandle;
+    ASSERT_NO_FATAL_FAILURE(rawHandle = mGralloc->allocate(mDummyDescriptorInfo, false));
+
+    native_handle_t* importedHandle = nullptr;
+    mGralloc->getMapper()->importBuffer(rawHandle, [&](const auto& tmpError, const auto& buffer) {
+        ASSERT_EQ(Error::NONE, tmpError);
+        importedHandle = static_cast<native_handle_t*>(buffer);
+    });
+
+    // free the imported handle with another mapper
+    std::unique_ptr<Gralloc> anotherGralloc;
+    ASSERT_NO_FATAL_FAILURE(
+            anotherGralloc = std::make_unique<Gralloc>(
+                    GraphicsMapperHidlEnvironment::Instance()->getServiceName<IAllocator>(),
+                    GraphicsMapperHidlEnvironment::Instance()->getServiceName<IMapper>()));
+    Error error = mGralloc->getMapper()->freeBuffer(importedHandle);
+    ASSERT_EQ(Error::NONE, error);
+
+    ASSERT_NO_FATAL_FAILURE(mGralloc->freeBuffer(rawHandle));
+}
+
+/**
+ * Test IMapper::importBuffer and IMapper::freeBuffer do not leak.
+ */
+TEST_F(GraphicsMapperHidlTest, ImportFreeBufferNoLeak) {
+    auto info = mDummyDescriptorInfo;
+    info.width = 1024;
+    info.height = 1024;
+
+    for (int i = 0; i < 2048; i++) {
+        auto bufferHandle = mGralloc->allocate(info, true);
+        mGralloc->freeBuffer(bufferHandle);
+    }
+}
+
+/**
+ * Test IMapper::importBuffer with invalid buffers.
+ */
+TEST_F(GraphicsMapperHidlTest, ImportBufferNegative) {
+    native_handle_t* invalidHandle = nullptr;
+    mGralloc->getMapper()->importBuffer(invalidHandle, [&](const auto& tmpError, const auto&) {
+        EXPECT_EQ(Error::BAD_BUFFER, tmpError)
+                << "importBuffer with nullptr did not fail with BAD_BUFFER";
+    });
+
+    invalidHandle = native_handle_create(0, 0);
+    mGralloc->getMapper()->importBuffer(invalidHandle, [&](const auto& tmpError, const auto&) {
+        EXPECT_EQ(Error::BAD_BUFFER, tmpError)
+                << "importBuffer with invalid handle did not fail with BAD_BUFFER";
+    });
+    native_handle_delete(invalidHandle);
+}
+
+/**
+ * Test IMapper::freeBuffer with invalid buffers.
+ */
+TEST_F(GraphicsMapperHidlTest, FreeBufferNegative) {
+    native_handle_t* invalidHandle = nullptr;
+    Error error = mGralloc->getMapper()->freeBuffer(invalidHandle);
+    EXPECT_EQ(Error::BAD_BUFFER, error) << "freeBuffer with nullptr did not fail with BAD_BUFFER";
+
+    invalidHandle = native_handle_create(0, 0);
+    error = mGralloc->getMapper()->freeBuffer(invalidHandle);
+    EXPECT_EQ(Error::BAD_BUFFER, error)
+            << "freeBuffer with invalid handle did not fail with BAD_BUFFER";
+    native_handle_delete(invalidHandle);
+
+    const native_handle_t* clonedBufferHandle;
+    ASSERT_NO_FATAL_FAILURE(clonedBufferHandle = mGralloc->allocate(mDummyDescriptorInfo, false));
+    error = mGralloc->getMapper()->freeBuffer(invalidHandle);
+    EXPECT_EQ(Error::BAD_BUFFER, error)
+            << "freeBuffer with un-imported handle did not fail with BAD_BUFFER";
+
+    mGralloc->freeBuffer(clonedBufferHandle);
+}
+
+/**
+ * Test IMapper::lock and IMapper::unlock.
+ */
+TEST_F(GraphicsMapperHidlTest, LockUnlockBasic) {
+    const auto& info = mDummyDescriptorInfo;
+
+    const native_handle_t* bufferHandle;
+    uint32_t stride;
+    ASSERT_NO_FATAL_FAILURE(bufferHandle = mGralloc->allocate(info, true, &stride));
+
+    // lock buffer for writing
+    const IMapper::Rect region{0, 0, static_cast<int32_t>(info.width),
+                               static_cast<int32_t>(info.height)};
+    int fence = -1;
+    uint8_t* data;
+    int32_t bytesPerPixel = -1;
+    int32_t bytesPerStride = -1;
+    ASSERT_NO_FATAL_FAILURE(
+            data = static_cast<uint8_t*>(mGralloc->lock(bufferHandle, info.usage, region, fence,
+                                                        &bytesPerPixel, &bytesPerStride)));
+
+    // Valid return values are -1 for unsupported or the number bytes for supported which is >=0
+    EXPECT_GT(bytesPerPixel, -1);
+    EXPECT_GT(bytesPerStride, -1);
+
+    // RGBA_8888
+    size_t strideInBytes = stride * 4;
+    size_t writeInBytes = info.width * 4;
+
+    for (uint32_t y = 0; y < info.height; y++) {
+        memset(data, y, writeInBytes);
+        data += strideInBytes;
+    }
+
+    ASSERT_NO_FATAL_FAILURE(fence = mGralloc->unlock(bufferHandle));
+
+    bytesPerPixel = -1;
+    bytesPerStride = -1;
+
+    // lock again for reading
+    ASSERT_NO_FATAL_FAILURE(
+            data = static_cast<uint8_t*>(mGralloc->lock(bufferHandle, info.usage, region, fence,
+                                                        &bytesPerPixel, &bytesPerStride)));
+    for (uint32_t y = 0; y < info.height; y++) {
+        for (size_t i = 0; i < writeInBytes; i++) {
+            EXPECT_EQ(static_cast<uint8_t>(y), data[i]);
+        }
+        data += strideInBytes;
+    }
+
+    EXPECT_GT(bytesPerPixel, -1);
+    EXPECT_GT(bytesPerStride, -1);
+
+    ASSERT_NO_FATAL_FAILURE(fence = mGralloc->unlock(bufferHandle));
+    if (fence >= 0) {
+        close(fence);
+    }
+}
+
+/**
+ * Test IMapper::lockYCbCr.  This locks a YV12 buffer, and makes sure we can
+ * write to and read from it.
+ */
+TEST_F(GraphicsMapperHidlTest, LockYCbCrBasic) {
+    auto info = mDummyDescriptorInfo;
+    info.format = PixelFormat::YV12;
+
+    const native_handle_t* bufferHandle;
+    uint32_t stride;
+    ASSERT_NO_FATAL_FAILURE(bufferHandle = mGralloc->allocate(info, true, &stride));
+
+    // lock buffer for writing
+    const IMapper::Rect region{0, 0, static_cast<int32_t>(info.width),
+                               static_cast<int32_t>(info.height)};
+    int fence = -1;
+    YCbCrLayout layout;
+    ASSERT_NO_FATAL_FAILURE(layout = mGralloc->lockYCbCr(bufferHandle, info.usage, region, fence));
+
+    auto yData = static_cast<uint8_t*>(layout.y);
+    auto cbData = static_cast<uint8_t*>(layout.cb);
+    auto crData = static_cast<uint8_t*>(layout.cr);
+    for (uint32_t y = 0; y < info.height; y++) {
+        for (uint32_t x = 0; x < info.width; x++) {
+            auto val = static_cast<uint8_t>(info.height * y + x);
+
+            yData[layout.yStride * y + x] = val;
+            if (y % 2 == 0 && x % 2 == 0) {
+                cbData[layout.cStride * y / 2 + x / 2] = val;
+                crData[layout.cStride * y / 2 + x / 2] = val;
+            }
+        }
+    }
+
+    ASSERT_NO_FATAL_FAILURE(fence = mGralloc->unlock(bufferHandle));
+
+    // lock again for reading
+    ASSERT_NO_FATAL_FAILURE(layout = mGralloc->lockYCbCr(bufferHandle, info.usage, region, fence));
+
+    yData = static_cast<uint8_t*>(layout.y);
+    cbData = static_cast<uint8_t*>(layout.cb);
+    crData = static_cast<uint8_t*>(layout.cr);
+    for (uint32_t y = 0; y < info.height; y++) {
+        for (uint32_t x = 0; x < info.width; x++) {
+            auto val = static_cast<uint8_t>(info.height * y + x);
+
+            EXPECT_EQ(val, yData[layout.yStride * y + x]);
+            if (y % 2 == 0 && x % 2 == 0) {
+                EXPECT_EQ(val, cbData[layout.cStride * y / 2 + x / 2]);
+                EXPECT_EQ(val, crData[layout.cStride * y / 2 + x / 2]);
+            }
+        }
+    }
+
+    ASSERT_NO_FATAL_FAILURE(fence = mGralloc->unlock(bufferHandle));
+    if (fence >= 0) {
+        close(fence);
+    }
+}
+
+/**
+ * Test IMapper::unlock with invalid buffers.
+ */
+TEST_F(GraphicsMapperHidlTest, UnlockNegative) {
+    native_handle_t* invalidHandle = nullptr;
+    mGralloc->getMapper()->unlock(invalidHandle, [&](const auto& tmpError, const auto&) {
+        EXPECT_EQ(Error::BAD_BUFFER, tmpError)
+                << "unlock with nullptr did not fail with BAD_BUFFER";
+    });
+
+    invalidHandle = native_handle_create(0, 0);
+    mGralloc->getMapper()->unlock(invalidHandle, [&](const auto& tmpError, const auto&) {
+        EXPECT_EQ(Error::BAD_BUFFER, tmpError)
+                << "unlock with invalid handle did not fail with BAD_BUFFER";
+    });
+    native_handle_delete(invalidHandle);
+
+    ASSERT_NO_FATAL_FAILURE(invalidHandle = const_cast<native_handle_t*>(
+                                    mGralloc->allocate(mDummyDescriptorInfo, false)));
+    mGralloc->getMapper()->unlock(invalidHandle, [&](const auto& tmpError, const auto&) {
+        EXPECT_EQ(Error::BAD_BUFFER, tmpError)
+                << "unlock with un-imported handle did not fail with BAD_BUFFER";
+    });
+    mGralloc->freeBuffer(invalidHandle);
+
+// disabled as it fails on many existing drivers
+#if 0
+  ASSERT_NO_FATAL_FAILURE(invalidHandle = const_cast<native_handle_t*>(
+                              mGralloc->allocate(mDummyDescriptorInfo, true)));
+  mGralloc->getMapper()->unlock(
+      invalidHandle, [&](const auto& tmpError, const auto&) {
+        EXPECT_EQ(Error::BAD_BUFFER, tmpError)
+            << "unlock with unlocked handle did not fail with BAD_BUFFER";
+      });
+  mGralloc->freeBuffer(invalidHandle);
+#endif
+}
+
+/**
+ * Test IMapper::isSupported with required format RGBA_8888
+ */
+TEST_F(GraphicsMapperHidlTest, IsSupportedRGBA8888) {
+    const auto& info = mDummyDescriptorInfo;
+    bool supported = false;
+
+    ASSERT_NO_FATAL_FAILURE(supported = mGralloc->isSupported(info));
+    ASSERT_TRUE(supported);
+}
+
+/**
+ * Test IMapper::isSupported with required format YV12
+ */
+TEST_F(GraphicsMapperHidlTest, IsSupportedYV12) {
+    auto info = mDummyDescriptorInfo;
+    info.format = PixelFormat::YV12;
+    bool supported = false;
+
+    ASSERT_NO_FATAL_FAILURE(supported = mGralloc->isSupported(info));
+    ASSERT_TRUE(supported);
+}
+
+/**
+ * Test IMapper::isSupported with optional format Y16
+ */
+TEST_F(GraphicsMapperHidlTest, IsSupportedY16) {
+    auto info = mDummyDescriptorInfo;
+    info.format = PixelFormat::Y16;
+    bool supported = false;
+
+    ASSERT_NO_FATAL_FAILURE(supported = mGralloc->isSupported(info));
+}
+
+}  // namespace
+}  // namespace vts
+}  // namespace V4_0
+}  // namespace mapper
+}  // namespace graphics
+}  // namespace hardware
+}  // namespace android
+
+int main(int argc, char** argv) {
+    using android::hardware::graphics::mapper::V4_0::vts::GraphicsMapperHidlEnvironment;
+    ::testing::AddGlobalTestEnvironment(GraphicsMapperHidlEnvironment::Instance());
+    ::testing::InitGoogleTest(&argc, argv);
+    GraphicsMapperHidlEnvironment::Instance()->init(&argc, argv);
+    int status = RUN_ALL_TESTS();
+    LOG(INFO) << "Test result = " << status;
+    return status;
+}