diff --git a/radio/1.4/Android.bp b/radio/1.4/Android.bp
new file mode 100644
index 0000000..02c6cad
--- /dev/null
+++ b/radio/1.4/Android.bp
@@ -0,0 +1,43 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.radio@1.4",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IRadio.hal",
+        "IRadioIndication.hal",
+        "IRadioResponse.hal",
+    ],
+    interfaces: [
+        "android.hardware.radio@1.0",
+        "android.hardware.radio@1.1",
+        "android.hardware.radio@1.2",
+        "android.hardware.radio@1.3",
+        "android.hidl.base@1.0",
+        "android.hidl.safe_union@1.0",
+    ],
+    types: [
+        "AccessNetwork",
+        "CellConfigLte",
+        "CellInfo",
+        "CellInfoLte",
+        "CardStatus",
+        "DataProfileInfo",
+        "DataRegStateResult",
+        "EmergencyNumber",
+        "EmergencyNumberSource",
+        "EmergencyServiceCategory",
+        "FrequencyRange",
+        "RadioFrequencyInfo",
+        "RadioTechnology",
+        "PhysicalChannelConfig",
+        "LteVopsInfo",
+        "NetworkScanResult",
+    ],
+    gen_java: true,
+}
+
diff --git a/radio/1.4/IRadio.hal b/radio/1.4/IRadio.hal
new file mode 100644
index 0000000..1b6d9a6
--- /dev/null
+++ b/radio/1.4/IRadio.hal
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.4::DataProfileInfo;
+import @1.0::Dial;
+import @1.2::DataRequestReason;
+import @1.3::IRadio;
+import @1.4::AccessNetwork;
+import @1.4::EmergencyServiceCategory;
+
+/**
+ * This interface is used by telephony and telecom to talk to cellular radio.
+ * All the functions have minimum one parameter:
+ * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
+ * duration of a method call. If clients provide colliding serials (including passing the same
+ * serial to different methods), multiple responses (one for each method call) must still be served.
+ * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication.
+ */
+interface IRadio extends @1.3::IRadio {
+    /**
+     * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
+     * the data connection must be added to data calls and a unsolDataCallListChanged() must be
+     * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
+     * lost due to many factors, including deactivateDataCall() being issued, the radio powered
+     * off, reception lost or even transient factors like congestion. This data call list is
+     * returned by getDataCallList() and dataCallListChanged().
+     *
+     * The Radio is expected to:
+     *   - Create one data call context.
+     *   - Create and configure a dedicated interface for the context.
+     *   - The interface must be point to point.
+     *   - The interface is configured with one or more addresses and is capable of sending and
+     *     receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
+     *     for IPv6.
+     *   - Must not modify routing configuration related to this interface; routing management is
+     *     exclusively within the purview of the Android OS.
+     *   - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
+     *     in the response of getDataRegistrationState.
+     *
+     * @param serial Serial number of request.
+     * @param accessNetwork The access network to setup the data call. If the data connection cannot
+     *     be established on the specified access network, the setup request must be failed.
+     * @param dataProfileInfo Data profile info.
+     * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
+     * @param reason The request reason. Must be DataRequestReason.NORMAL or
+     *     DataRequestReason.HANDOVER.
+     * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
+     *     addresses of the existing data connection. The format is IP address with optional "/"
+     *     prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
+     *     "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
+     *     the prefix length is absent, then the addresses are assumed to be point to point with
+     *     IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored
+     *     unless reason is DataRequestReason.HANDOVER.
+     * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
+     *     addresses of the existing data connection. The format is defined in RFC-4291 section
+     *     2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
+     *     reason is DataRequestReason.HANDOVER.
+     *
+     * Response function is IRadioResponse.setupDataCallResponse()
+     *
+     * Note this API is same as 1.2 version except using the 1.4 AccessNetwork as the input param.
+     */
+    oneway setupDataCall_1_4(int32_t serial, AccessNetwork accessNetwork,
+            DataProfileInfo dataProfileInfo, bool roamingAllowed,
+            DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+
+    /**
+     * Set an apn to initial attach network
+     *
+     * @param serial Serial number of request.
+     * @param dataProfileInfo data profile containing APN settings
+     *
+     * Response callback is IRadioResponse.setInitialAttachApnResponse()
+     */
+    oneway setInitialAttachApn_1_4(int32_t serial, DataProfileInfo dataProfileInfo);
+
+    /**
+     * Send data profiles of the current carrier to the modem.
+     *
+     * @param serial Serial number of request.
+     * @param profiles Array of DataProfile to set.
+     *
+     * Response callback is IRadioResponse.setDataProfileResponse()
+     */
+    oneway setDataProfile_1_4(int32_t serial, vec<DataProfileInfo> profiles);
+
+    /**
+     * Initiate emergency voice call, with zero or more emergency service category(s).
+     *
+     * Note this API is the same as IRadio.dial except using the
+     * @1.4::EmergencyServiceCategory as the input param.
+     *
+     * If the dialed emergency number does not have a specified emergency service category, the
+     * 'categories' field is set to @1.4::EmergencyServiceCategory#UNSPECIFIED; iff either the
+     * 'categories' field is set to @1.4::EmergencyServiceCategory#UNSPECIFIED or the underlying
+     * technology used to request emergency services does not support the emergency service
+     * category, the interpretation of the categories is defined by implementation.
+     *
+     * Reference: 3gpp TS 22.101, Section 10 - Emergency Calls
+     *
+     * @param serial Serial number of request.
+     * @param dialInfo the same @1.0::Dial information used by @1.0::IRadio.dial.
+     * @param categories bitfield<@1.4::EmergencyServiceCategory> the Emergency Service Category(s)
+     *     of the call.
+     *
+     * Response function is IRadioResponse.emergencyDialResponse()
+     */
+    oneway emergencyDial(int32_t serial, Dial dialInfo,
+            bitfield<EmergencyServiceCategory> categories);
+};
diff --git a/radio/1.4/IRadioIndication.hal b/radio/1.4/IRadioIndication.hal
new file mode 100644
index 0000000..fac77f7
--- /dev/null
+++ b/radio/1.4/IRadioIndication.hal
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.0::RadioIndicationType;
+import @1.3::IRadioIndication;
+
+/**
+ * Interface declaring unsolicited radio indications.
+ */
+interface IRadioIndication extends @1.3::IRadioIndication {
+    /**
+     * Report the current list of emergency numbers
+     *
+     * Each emergency number (@1.4::EmergencyNumber) in the emergency number list contains a
+     * dialing number, zero or more service category(s), mobile country code, and source(s) that
+     * indicate where it comes from.
+     *
+     * Radio must report all the valid emergency numbers with known mobile country code and
+     * emergency service categories from all available sources including network signaling, sim,
+     * modem/oem configuration, and default configuration (112 and 911 must be always available;
+     * additionally, 000, 08, 110, 999, 118 and 119 must be available when sim is not present).
+     * Radio shall not report emergency numbers that are invalid in the current locale. The
+     * reported emergency number list must not have duplicate @1.4::EmergencyNumber entries. Please
+     * refer the documentation of @1.4::EmergencyNumber to construct each emergency number to
+     * report.
+     *
+     * Radio must report the complete list of emergency numbers whenever the emergency numbers in
+     * the list are changed or whenever the client and the radio server are connected.
+     *
+     * Reference: 3gpp 22.101, Section 10 - Emergency Calls
+     *
+     * @param type Type of radio indication
+     * @param emergencyNumberList Current list of emergency numbers known to radio.
+     */
+    oneway currentEmergencyNumberList(RadioIndicationType type,
+            vec<EmergencyNumber> emergencyNumberList);
+
+    /**
+     * Request all of the current cell information known to the radio.
+     *
+     * @param type Type of radio indication
+     * @param records Current cell information
+     */
+    oneway cellInfoList_1_4(RadioIndicationType type, vec<CellInfo> records);
+
+    /**
+     * Incremental network scan results
+     */
+    oneway networkScanResult_1_4(RadioIndicationType type, NetworkScanResult result);
+
+    /**
+     * Indicates physical channel configurations.
+     *
+     * An empty configs list indicates that the radio is in idle mode.
+     *
+     * @param type Type of radio indication
+     * @param configs Vector of PhysicalChannelConfigs
+     */
+    oneway currentPhysicalChannelConfigs_1_4(RadioIndicationType type,
+            vec<PhysicalChannelConfig> configs);
+};
\ No newline at end of file
diff --git a/radio/1.4/IRadioResponse.hal b/radio/1.4/IRadioResponse.hal
new file mode 100644
index 0000000..d971850
--- /dev/null
+++ b/radio/1.4/IRadioResponse.hal
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.0::RadioResponseInfo;
+import @1.3::IRadioResponse;
+
+/**
+ * Interface declaring response functions to solicited radio requests.
+ */
+interface IRadioResponse extends @1.3::IRadioResponse {
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE (radio resetting)
+     *   RadioError:DIAL_MODIFIED_TO_USSD
+     *   RadioError:DIAL_MODIFIED_TO_SS
+     *   RadioError:DIAL_MODIFIED_TO_DIAL
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:NO_MEMORY
+     *   RadioError:NO_RESOURCES
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:FDN_CHECK_FAILURE
+     *   RadioError:MODEM_ERR
+     *   RadioError:NO_SUBSCRIPTION
+     *   RadioError:NO_NETWORK_FOUND
+     *   RadioError:INVALID_CALL_ID
+     *   RadioError:DEVICE_IN_USE
+     *   RadioError:ABORTED
+     *   RadioError:INVALID_MODEM_STATE
+     *   RadioError:CANCELLED
+     */
+    oneway emergencyDialResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param cellInfo List of current cell information known to radio
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     */
+    oneway getCellInfoListResponse_1_4(RadioResponseInfo info, vec<CellInfo> cellInfo);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param dataRegResponse Current Data registration response as defined by DataRegStateResult in
+     *        types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NOT_PROVISIONED
+     */
+    oneway getDataRegistrationStateResponse_1_4(RadioResponseInfo info,
+            DataRegStateResult dataRegResponse);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param cardStatus ICC card status as defined by CardStatus in types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NO_MEMORY
+     *   RadioError:NO_RESOURCES
+     *   RadioError:CANCELLED
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     */
+    oneway getIccCardStatusResponse_1_4(RadioResponseInfo info, CardStatus cardStatus);
+};
\ No newline at end of file
diff --git a/radio/1.4/types.hal b/radio/1.4/types.hal
new file mode 100644
index 0000000..ea3c53f
--- /dev/null
+++ b/radio/1.4/types.hal
@@ -0,0 +1,401 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.0::ApnAuthType;
+import @1.0::ApnTypes;
+import @1.0::CellInfoType;
+import @1.0::DataProfileId;
+import @1.0::DataProfileInfoType;
+import @1.0::RadioAccessFamily;
+import @1.0::RadioError;
+import @1.0::RadioTechnology;
+import @1.0::RegState;
+import @1.0::TimeStampType;
+import @1.1::ScanStatus;
+import @1.2::AccessNetwork;
+import @1.2::CellInfo;
+import @1.2::CellInfoCdma;
+import @1.2::CellInfoGsm;
+import @1.2::CellInfoLte;
+import @1.2::CellInfoTdscdma;
+import @1.2::CellInfoWcdma;
+import @1.2::CardStatus;
+import @1.2::CellIdentity;
+import @1.2::DataRegStateResult;
+import @1.2::PhysicalChannelConfig;
+
+import android.hidl.safe_union@1.0::Monostate;
+
+enum AccessNetwork : @1.2::AccessNetwork {
+    /**
+     * Unknown access network
+     */
+    UNKNOWN = 0,
+};
+
+/**
+ * Emergency number contains information of number, one or more service category(s), mobile country
+ * code (mcc), and source(s) that indicate where it comes from.
+ *
+ * If the source of the emergency number is associated with country, field ‘mcc’ must be
+ * provided; otherwise the field ‘mcc’ must be an empty string.
+ *
+ * A unique EmergencyNumber has a unique combination of ‘number’, ‘mcc’ and 'categories' fields.
+ * Multiple @1.4::EmergencyNumberSource should be merged into the bitfield for the same
+ * EmergencyNumber.
+ *
+ * Reference: 3GPP TS 22.101 version 9.1.0 Release 9
+ */
+struct EmergencyNumber{
+    /**
+     * The emergency number. The character in the number string should only be the dial pad
+     * character('0'-'9', '*', or '#'). For example: 911.
+     */
+    string number;
+    /**
+     * 3-digit Mobile Country Code, 0..999. Empty string if not applicable.
+     */
+    string mcc;
+    /**
+     * The bitfield of @1.4::EmergencyServiceCategory(s). See @1.4::EmergencyServiceCategory for
+     * the value of each bit.
+     */
+    bitfield<EmergencyServiceCategory> categories;
+    /**
+     * The bitfield of @1.4::EmergencyNumberSource(s). See @1.4::EmergencyNumberSource for the
+     * value of each bit.
+     */
+    bitfield<EmergencyNumberSource> sources;
+};
+
+/**
+ * Defining Emergency Service Category as follows:
+ * - General emergency call, all categories;
+ * - Police;
+ * - Ambulance;
+ * - Fire Brigade;
+ * - Marine Guard;
+ * - Mountain Rescue;
+ * - Manually Initiated eCall (MIeC);
+ * - Automatically Initiated eCall (AIeC);
+ *
+ * Category UNSPECIFIED (General emergency call, all categories) indicates that no specific
+ * services are associated with this emergency number.
+ *
+ * Reference: 3gpp 22.101, Section 10 - Emergency Calls
+ */
+enum EmergencyServiceCategory : int32_t {
+    /**
+     * General emergency call, all categories
+     */
+    UNSPECIFIED = 0,
+    POLICE = 1 << 0,
+    AMBULANCE = 1 << 1,
+    FIRE_BRIGADE = 1 << 2,
+    MARINE_GUARD = 1 << 3,
+    MOUNTAIN_RESCUE = 1 << 4,
+    /**
+     * Manually Initiated eCall (MIeC)
+     */
+    MIEC = 1 << 5,
+    /**
+     * Automatically Initiated eCall (AIeC)
+     */
+    AIEC = 1 << 6,
+};
+
+/**
+ * The source to tell where the corresponding @1.4::EmergencyNumber comes from.
+ *
+ * Reference: 3gpp 22.101, Section 10 - Emergency Calls
+ */
+enum EmergencyNumberSource : int32_t {
+    /**
+     * Indicates the number is from the network signal.
+     */
+    NETWORK_SIGNALING = 1 << 0,
+    /**
+     * Indicates the number is from the sim card.
+     */
+    SIM = 1 << 1,
+    /**
+     * Indicates the number is from the modem config.
+     */
+    MODEM_CONFIG = 1 << 2,
+    /**
+     * Indicates the number is available as default. Per the reference, 112, 911 must always be
+     * available; additionally, 000, 08, 110, 999, 118 and 119 must be available when sim is not
+     * present.
+     */
+    DEFAULT = 1 << 3,
+};
+
+enum RadioTechnology : @1.0::RadioTechnology {
+    /** 5G NR. */
+    NR = 20,
+};
+
+/** Mapping the frequency to a rough range. */
+enum FrequencyRange : int32_t {
+    /** Indicates the frequency range is below 1GHz. */
+    LOW = 1,
+
+    /** Indicates the frequency range is between 1GHz and 3GHz. */
+    MID = 2,
+
+    /** Indicates the frequency range is between 3GHz and 6GHz. */
+    HIGH = 3,
+
+    /** Indicates the frequency range is above 6GHz (millimeter wave frequency). */
+    MMWAVE = 4,
+};
+
+safe_union RadioFrequencyInfo {
+    /** A rough frequency range. */
+    FrequencyRange range;
+
+    /** The Absolute Radio Frequency Channel Number. */
+    int32_t channelNumber;
+};
+
+struct PhysicalChannelConfig {
+    @1.2::PhysicalChannelConfig base;
+
+    /** The radio technology for this physical channel. */
+    RadioTechnology rat;
+
+    /** The radio frequency info. */
+    RadioFrequencyInfo rfInfo;
+
+    /**
+     * A list of data calls mapped to this physical channel. The context id must match the cid of
+     * @1.0::SetupDataCallResult. An empty list means the physical channel has no data call mapped
+     * to it.
+     */
+    vec<int32_t> contextIds;
+
+    /**
+     * The physical cell identifier for this cell.
+     *
+     * In UTRAN, this value is primary scrambling code. The range is [0, 511].
+     * Reference: 3GPP TS 25.213 section 5.2.2.
+     *
+     * In EUTRAN, this value is physical layer cell identity. The range is [0, 503].
+     * Reference: 3GPP TS 36.211 section 6.11.
+     *
+     * In 5G RAN, this value is physical layer cell identity. The range is [0, 1008].
+     * Reference: 3GPP TS 38.211 section 7.4.2.1.
+     */
+    uint32_t physicalCellId;
+};
+
+/**
+ * Type to define the LTE specific network capabilities for voice over PS including
+ * emergency and normal voice calls.
+ */
+struct LteVopsInfo {
+    /**
+     * This indicates if camped network support VoLTE services. This information is received
+     * from LTE network during LTE NAS registration procedure through LTE ATTACH ACCEPT/TAU
+     * ACCEPT. Refer 3GPP 24.301 EPS network feature support -> IMS VoPS
+     */
+    bool isVopsSupported;
+    /**
+     * This indicates if camped network support VoLTE emergency bearers. This information
+     * is received from LTE network through two sources:
+     * a. During LTE NAS registration procedure through LTE ATTACH ACCEPT/TAU ACCEPT. Refer
+     *    3GPP 24.301 EPS network feature support -> EMC BS
+     * b. In case device is not registered on network. Refer 3GPP 25.331 LTE RRC
+     *    SIB1 : ims-EmergencySupport-r9
+     * If device is registered on LTE, then this field indicates (a).
+     * In case of limited service on LTE this field indicates (b).
+     */
+    bool isEmcBearerSupported;
+};
+
+struct DataRegStateResult {
+    @1.2::DataRegStateResult base;
+    /**
+     * Network capabilities for voice over PS services. This info is valid only
+     * on LTE network and must be present when device is camped on LTE. vopsInfo
+     * will be empty when device is camped only on 2G/3G .
+     */
+    safe_union VopsInfo {
+        Monostate noinit;
+
+        LteVopsInfo lteVopsInfo; // LTE network capability
+    } vopsInfo;
+
+    /**
+     * True if use of dual connectivity with NR is restricted.
+     * Reference: 3GPP TS 24.301 v15.03 section 9.3.3.12A.
+     */
+    bool isDcNrRestricted;
+
+    /**
+     * True if the bit N is in the PLMN-InfoList-r15 is true and the selected PLMN is present in
+     * plmn-IdentityList at position N.
+     * Reference: 3GPP TS 36.331 v15.2.2 section 6.3.1 PLMN-InfoList-r15.
+     *            3GPP TS 36.331 v15.2.2 section 6.2.2 SystemInformationBlockType1 message.
+     */
+    bool isNrAvailable;
+};
+
+/** Contains the configuration of the LTE cell tower. */
+struct CellConfigLte {
+    /**
+     * Indicates that if E-UTRA-NR Dual Connectivity (EN-DC) is supported by the LTE cell.
+     *
+     * True if the plmn-InfoList-r15 is present in SIB2 and at least one bit in this list is true,
+     * otherwise this value should be false.
+     *
+     * Reference: 3GPP TS 36.331 v15.2.2 6.3.1 System information blocks.
+     */
+    bool isEndcAvailable;
+};
+
+/** Inherits from @1.2::CellInfoLte, in order to add the LTE configuration. */
+struct CellInfoLte {
+    @1.2::CellInfoLte base;
+    CellConfigLte cellConfig;
+};
+
+/** Overwritten from @1.2::CellInfo in order to update the CellInfoLte to 1.4 version. */
+struct CellInfo {
+    /** Cell type for selecting from union CellInfo. */
+    CellInfoType cellInfoType;
+
+    /**
+     * True if the phone is registered to a mobile network that provides service on this cell and
+     * this cell is being used or would be used for network signaling.
+     */
+    bool isRegistered;
+
+    /** CellInfo details, cellInfoType can tell which cell info should be used. */
+    safe_union Info {
+        CellInfoGsm gsm;
+        CellInfoCdma cdma;
+        CellInfoWcdma wcdma;
+        CellInfoTdscdma tdscdma;
+        CellInfoLte lte;
+    } info;
+};
+
+/** Overwritten from @1.2::NetworkScanResult in order to update the CellInfo to 1.4 version. */
+struct NetworkScanResult {
+    /**
+     * The status of the scan.
+     */
+    ScanStatus status;
+
+    /**
+     * The error code of the incremental result.
+     */
+    RadioError error;
+
+    /**
+     * List of network information as CellInfo.
+     */
+    vec<CellInfo> networkInfos;
+};
+
+/**
+ * Overwritten from @1.0::DataProfileInfo in order to deprecate 'mvnoType', and 'mvnoMatchData'.
+ * In the future, this must be extended instead of overwritten.
+ * Also added 'preferred' and 'persistent' in this version.
+ */
+struct DataProfileInfo {
+    /** id of the data profile */
+    DataProfileId profileId;
+
+    /** The APN name */
+    string apn;
+
+    /**
+     * One of the PDP_type values in TS 27.007 section 10.1.1. For example, "IP", "IPV6", "IPV4V6",
+     * or "PPP".
+     */
+    string protocol;
+
+    /**
+     * one of the PDP_type values in TS 27.007 section 10.1.1 used on roaming network. For example,
+     * "IP", "IPV6", "IPV4V6", or "PPP".
+     */
+    string roamingProtocol;
+
+    /** APN authentication type */
+    ApnAuthType authType;
+
+    /** The username for APN, or empty string */
+    string user;
+
+    /** The password for APN, or empty string */
+    string password;
+
+    /** Data profile technology type */
+    DataProfileInfoType type;
+
+    /** The period in seconds to limit the maximum connections */
+    int32_t maxConnsTime;
+
+    /** The maximum connections during maxConnsTime */
+    int32_t maxConns;
+
+    /**
+     * The required wait time in seconds after a successful UE initiated disconnect of a given PDN
+     * connection before the device can send a new PDN connection request for that given PDN.
+     */
+    int32_t waitTime;
+
+    /** True to enable the profile, false to disable */
+    bool enabled;
+
+    /** Supported APN types bitmap. See ApnTypes for the value of each bit. */
+    bitfield<ApnTypes> supportedApnTypesBitmap;
+
+    /** The bearer bitmap. See RadioAccessFamily for the value of each bit. */
+    bitfield<RadioAccessFamily> bearerBitmap;
+
+    /** Maximum transmission unit (MTU) size in bytes */
+    int32_t mtu;
+
+    /**
+     * True if this data profile was used to bring up the last default (i.e internet) data
+     * connection successfully.
+     */
+    bool preferred;
+
+    /**
+     * If true, modem must persist this data profile and profileId must not be
+     * set to DataProfileId.INVALID. If the same data profile exists, this data profile must
+     * overwrite it.
+     */
+    bool persistent;
+};
+
+struct CardStatus {
+    @1.2::CardStatus base;
+    /**
+     * The EID is the eUICC identifier. The EID shall be stored within the ECASD and can be
+     * retrieved by the Device at any time using the standard GlobalPlatform GET DATA command.
+     *
+     * This data is mandatory and applicable only when cardState is CardState:PRESENT and SIM card
+     * supports eUICC.
+     */
+    string eid;
+};