diff --git a/audio/7.0/IDevice.hal b/audio/7.0/IDevice.hal
index 7082d6b..e30e545 100644
--- a/audio/7.0/IDevice.hal
+++ b/audio/7.0/IDevice.hal
@@ -117,7 +117,7 @@
             AudioIoHandle ioHandle,
             DeviceAddress device,
             AudioConfig config,
-            bitfield<AudioOutputFlag> flags,
+            vec<AudioInOutFlag> flags,
             SourceMetadata sourceMetadata) generates (
                     Result retval,
                     IStreamOut outStream,
@@ -142,7 +142,7 @@
             AudioIoHandle ioHandle,
             DeviceAddress device,
             AudioConfig config,
-            bitfield<AudioInputFlag> flags,
+            vec<AudioInOutFlag> flags,
             SinkMetadata sinkMetadata) generates (
                     Result retval,
                     IStreamIn inStream,
@@ -315,7 +315,6 @@
      *                INVALID_STATE if the device was already closed
      *                or there are streams currently opened.
      */
-    @exit
     close() generates (Result retval);
 
     /**
diff --git a/audio/7.0/IStream.hal b/audio/7.0/IStream.hal
index dacd3fd..4fe8218 100644
--- a/audio/7.0/IStream.hal
+++ b/audio/7.0/IStream.hal
@@ -44,111 +44,42 @@
     getBufferSize() generates (uint64_t bufferSize);
 
     /**
-     * Return the sampling rate in Hz.
+     * Return supported audio profiles for this particular stream. This method
+     * is normally called for streams opened on devices that use dynamic
+     * profiles, e.g. HDMI and USB interfaces. Please note that supported
+     * profiles of the stream may differ from the capabilities of the connected
+     * physical device.
      *
-     * @return sampleRateHz sample rate in Hz.
-     */
-    getSampleRate() generates (uint32_t sampleRateHz);
-
-    /**
-     * Return supported native sampling rates of the stream for a given format.
-     * A supported native sample rate is a sample rate that can be efficiently
-     * played by the hardware (typically without sample-rate conversions).
-     *
-     * This function is only called for dynamic profile. If called for
-     * non-dynamic profile is should return NOT_SUPPORTED or the same list
-     * as in audio_policy_configuration.xml.
-     *
-     * Calling this method is equivalent to getting
-     * AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES on the legacy HAL.
-     *
-     *
-     * @param format audio format for which the sample rates are supported.
-     * @return retval operation completion status.
-     *                Must be OK if the format is supported.
-     * @return sampleRateHz supported sample rates.
-     */
-    getSupportedSampleRates(AudioFormat format)
-            generates (Result retval, vec<uint32_t> sampleRates);
-
-    /**
-     * Sets the sampling rate of the stream. Calling this method is equivalent
-     * to setting AUDIO_PARAMETER_STREAM_SAMPLING_RATE on the legacy HAL.
-     * Optional method. If implemented, only called on a stopped stream.
-     *
-     * @param sampleRateHz sample rate in Hz.
-     * @return retval operation completion status.
-     */
-    setSampleRate(uint32_t sampleRateHz) generates (Result retval);
-
-    /**
-     * Return the channel mask of the stream.
-     *
-     * @return mask channel mask.
-     */
-    getChannelMask() generates (bitfield<AudioChannelMask> mask);
-
-    /**
-     * Return supported channel masks of the stream. Calling this method is
-     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_CHANNELS on the legacy
-     * HAL.
-     *
-     * @param format audio format for which the channel masks are supported.
-     * @return retval operation completion status.
-     *                Must be OK if the format is supported.
-     * @return masks supported audio masks.
-     */
-    getSupportedChannelMasks(AudioFormat format)
-            generates (Result retval, vec<bitfield<AudioChannelMask>> masks);
-
-    /**
-     * Sets the channel mask of the stream. Calling this method is equivalent to
-     * setting AUDIO_PARAMETER_STREAM_CHANNELS on the legacy HAL.
-     * Optional method
-     *
-     * @param format audio format.
-     * @return retval operation completion status.
-     */
-    setChannelMask(bitfield<AudioChannelMask> mask) generates (Result retval);
-
-    /**
-     * Return the audio format of the stream.
-     *
-     * @return format audio format.
-     */
-    getFormat() generates (AudioFormat format);
-
-    /**
-     * Return supported audio formats of the stream. Calling this method is
-     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_FORMATS on the legacy
-     * HAL.
+     * For devices with fixed configurations, e.g. built-in audio devices, all
+     * the profiles are specified in the audio_policy_configuration.xml
+     * file. For such devices, this method must return the configuration from
+     * the config file, or NOT_SUPPORTED retval.
      *
      * @return retval operation completion status.
-     * @return formats supported audio formats.
+     * @return formats supported audio profiles.
      *                 Must be non empty if retval is OK.
      */
-    getSupportedFormats() generates (Result retval, vec<AudioFormat> formats);
+    getSupportedProfiles()
+            generates (Result retval, vec<AudioProfile> profiles);
 
     /**
-     * Sets the audio format of the stream. Calling this method is equivalent to
-     * setting AUDIO_PARAMETER_STREAM_FORMAT on the legacy HAL.
-     * Optional method
+     * Retrieves basic stream configuration: sample rate, audio format,
+     * channel mask.
      *
-     * @param format audio format.
+     * @return config basic stream configuration.
+     */
+    getAudioProperties() generates (AudioConfigBase config);
+
+    /**
+     * Sets stream parameters. Only sets parameters that are specified.
+     * See the description of AudioConfigBase for the details.
+     *
+     * Optional method. If implemented, only called on a stopped stream.
+     *
+     * @param config basic stream configuration.
      * @return retval operation completion status.
      */
-    setFormat(AudioFormat format) generates (Result retval);
-
-    /**
-     * Convenience method for retrieving several stream parameters in
-     * one transaction.
-     *
-     * @return sampleRateHz sample rate in Hz.
-     * @return mask channel mask.
-     * @return format audio format.
-     */
-    getAudioProperties() generates (
-            uint32_t sampleRateHz, bitfield<AudioChannelMask> mask, AudioFormat format);
+    setAudioProperties(AudioConfigBase config) generates (Result retval);
 
     /**
      * Applies audio effect to the stream.
@@ -312,6 +243,5 @@
      *                              output stream interface.
      *                INVALID_STATE if the stream was already closed.
      */
-    @exit
     close() generates (Result retval);
 };
diff --git a/audio/7.0/IStreamIn.hal b/audio/7.0/IStreamIn.hal
index 15e4363..0a3f24b 100644
--- a/audio/7.0/IStreamIn.hal
+++ b/audio/7.0/IStreamIn.hal
@@ -100,7 +100,7 @@
      *
      * The driver operates on a dedicated thread. The client must ensure that
      * the thread is given an appropriate priority and assigned to correct
-     * scheduler and cgroup. For this purpose, the method returns identifiers
+     * scheduler and cgroup. For this purpose, the method returns the identifier
      * of the driver thread.
      *
      * @param frameSize the size of a single frame, in bytes.
@@ -115,7 +115,9 @@
      *                specified at the stream opening.
      * @return statusMQ a message queue used for passing status from the driver
      *                  using ReadStatus structures.
-     * @return threadInfo identifiers of the driver's dedicated thread.
+     * @return threadId identifier of the driver's dedicated thread; the caller
+     *                  may adjust the thread priority to match the priority
+     *                  of the thread that provides audio data.
      */
     prepareForReading(uint32_t frameSize, uint32_t framesCount)
     generates (
@@ -123,7 +125,7 @@
             fmq_sync<ReadParameters> commandMQ,
             fmq_sync<uint8_t> dataMQ,
             fmq_sync<ReadStatus> statusMQ,
-            ThreadInfo threadInfo);
+            int32_t threadId);
 
     /**
      * Return the amount of input frames lost in the audio driver since the last
diff --git a/audio/7.0/IStreamOut.hal b/audio/7.0/IStreamOut.hal
index 208beb6..38d750f 100644
--- a/audio/7.0/IStreamOut.hal
+++ b/audio/7.0/IStreamOut.hal
@@ -95,7 +95,7 @@
      *
      * The driver operates on a dedicated thread. The client must ensure that
      * the thread is given an appropriate priority and assigned to correct
-     * scheduler and cgroup. For this purpose, the method returns identifiers
+     * scheduler and cgroup. For this purpose, the method returns the identifier
      * of the driver thread.
      *
      * @param frameSize the size of a single frame, in bytes.
@@ -109,7 +109,9 @@
      *                specified at the stream opening.
      * @return statusMQ a message queue used for passing status from the driver
      *                  using WriteStatus structures.
-     * @return threadInfo identifiers of the driver's dedicated thread.
+     * @return threadId identifier of the driver's dedicated thread; the caller
+     *                  may adjust the thread priority to match the priority
+     *                  of the thread that provides audio data.
      */
     prepareForWriting(uint32_t frameSize, uint32_t framesCount)
     generates (
@@ -117,7 +119,7 @@
             fmq_sync<WriteCommand> commandMQ,
             fmq_sync<uint8_t> dataMQ,
             fmq_sync<WriteStatus> statusMQ,
-            ThreadInfo threadInfo);
+            int32_t threadId);
 
     /**
      * Return the number of audio frames written by the audio DSP to DAC since
diff --git a/audio/7.0/config/api/current.txt b/audio/7.0/config/api/current.txt
index 98c5eac..453ed16 100644
--- a/audio/7.0/config/api/current.txt
+++ b/audio/7.0/config/api/current.txt
@@ -6,12 +6,92 @@
     method public java.util.List<java.lang.String> getItem();
   }
 
+  public enum AudioChannelMask {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_10;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_11;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_12;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_13;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_14;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_15;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_16;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_17;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_18;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_19;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_20;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_21;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_22;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_23;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_24;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_3;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_4;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_5;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_6;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_7;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_8;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_9;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_2POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_2POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_3POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_3POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_5POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_6;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_FRONT_BACK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_STEREO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_VOICE_CALL_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_VOICE_DNLINK_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_VOICE_UPLINK_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_NONE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_2POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_2POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_2POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_3POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_3POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_3POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1POINT4;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1_BACK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1_SIDE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_6POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_7POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_7POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_7POINT1POINT4;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_HAPTIC_AB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_MONO_HAPTIC_A;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_MONO_HAPTIC_AB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_PENTA;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_QUAD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_QUAD_BACK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_QUAD_SIDE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_STEREO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_STEREO_HAPTIC_A;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_STEREO_HAPTIC_AB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_SURROUND;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_TRI;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_TRI_BACK;
+  }
+
+  public enum AudioContentType {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_MOVIE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_MUSIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_SONIFICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_SPEECH;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_UNKNOWN;
+  }
+
   public enum AudioDevice {
     method public String getRawName();
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_AMBIENT;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_AUX_DIGITAL;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BACK_MIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BLE_HEADSET;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_A2DP;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_BLE;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET;
@@ -42,6 +122,8 @@
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_AUX_DIGITAL;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_AUX_LINE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLE_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLE_SPEAKER;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES;
     enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER;
@@ -130,9 +212,11 @@
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_HE_AAC_V1;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_HE_AAC_V2;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_IEC61937;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_LC3;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_LDAC;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_LHDC;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_LHDC_LL;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MAT;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MAT_1_0;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MAT_2_0;
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MAT_2_1;
@@ -152,6 +236,42 @@
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_WMA_PRO;
   }
 
+  public enum AudioGainMode {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioGainMode AUDIO_GAIN_MODE_CHANNELS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioGainMode AUDIO_GAIN_MODE_JOINT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioGainMode AUDIO_GAIN_MODE_RAMP;
+  }
+
+  public enum AudioInOutFlag {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_DIRECT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_FAST;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_HW_AV_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_HW_HOTWORD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_MMAP_NOIRQ;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_NONE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_RAW;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_VOIP_TX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_DEEP_BUFFER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_DIRECT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_DIRECT_PCM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_FAST;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_HW_AV_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_IEC958_NONAUDIO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_INCALL_MUSIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_MMAP_NOIRQ;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_NONE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_NON_BLOCKING;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_PRIMARY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_RAW;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_TTS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_VOIP_RX;
+  }
+
   public class AudioPolicyConfiguration {
     ctor public AudioPolicyConfiguration();
     method public audio.policy.configuration.V7_0.GlobalConfiguration getGlobalConfiguration();
@@ -164,18 +284,60 @@
     method public void setVersion(audio.policy.configuration.V7_0.Version);
   }
 
+  public enum AudioSource {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_CAMCORDER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_ECHO_REFERENCE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_FM_TUNER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_HOTWORD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_MIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_UNPROCESSED;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_CALL;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_DOWNLINK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_PERFORMANCE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_RECOGNITION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_UPLINK;
+  }
+
+  public enum AudioStreamType {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ACCESSIBILITY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ALARM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_BLUETOOTH_SCO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_CALL_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_DTMF;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ENFORCED_AUDIBLE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_MUSIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_NOTIFICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_PATCH;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_REROUTING;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_RING;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_SYSTEM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_TTS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_VOICE_CALL;
+  }
+
   public enum AudioUsage {
     method public String getRawName();
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ALARM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ANNOUNCEMENT;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANCE_SONIFICATION;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_CALL_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_EMERGENCY;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_GAME;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_MEDIA;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_NOTIFICATION;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_SAFETY;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_UNKNOWN;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VEHICLE_STATUS;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VIRTUAL_SOURCE;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION;
     enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING;
@@ -220,13 +382,6 @@
     enum_constant public static final audio.policy.configuration.V7_0.EngineSuffix configurable;
   }
 
-  public enum GainMode {
-    method public String getRawName();
-    enum_constant public static final audio.policy.configuration.V7_0.GainMode AUDIO_GAIN_MODE_CHANNELS;
-    enum_constant public static final audio.policy.configuration.V7_0.GainMode AUDIO_GAIN_MODE_JOINT;
-    enum_constant public static final audio.policy.configuration.V7_0.GainMode AUDIO_GAIN_MODE_RAMP;
-  }
-
   public class Gains {
     ctor public Gains();
     method public java.util.List<audio.policy.configuration.V7_0.Gains.Gain> getGain();
@@ -234,23 +389,23 @@
 
   public static class Gains.Gain {
     ctor public Gains.Gain();
-    method public String getChannel_mask();
+    method public audio.policy.configuration.V7_0.AudioChannelMask getChannel_mask();
     method public int getDefaultValueMB();
     method public int getMaxRampMs();
     method public int getMaxValueMB();
     method public int getMinRampMs();
     method public int getMinValueMB();
-    method public audio.policy.configuration.V7_0.GainMode getMode();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioGainMode> getMode();
     method public String getName();
     method public int getStepValueMB();
     method public boolean getUseForVolume();
-    method public void setChannel_mask(String);
+    method public void setChannel_mask(audio.policy.configuration.V7_0.AudioChannelMask);
     method public void setDefaultValueMB(int);
     method public void setMaxRampMs(int);
     method public void setMaxValueMB(int);
     method public void setMinRampMs(int);
     method public void setMinValueMB(int);
-    method public void setMode(audio.policy.configuration.V7_0.GainMode);
+    method public void setMode(java.util.List<audio.policy.configuration.V7_0.AudioGainMode>);
     method public void setName(String);
     method public void setStepValueMB(int);
     method public void setUseForVolume(boolean);
@@ -279,7 +434,7 @@
 
   public static class MixPorts.MixPort {
     ctor public MixPorts.MixPort();
-    method public String getFlags();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioInOutFlag> getFlags();
     method public audio.policy.configuration.V7_0.Gains getGains();
     method public long getMaxActiveCount();
     method public long getMaxOpenCount();
@@ -287,7 +442,7 @@
     method public java.util.List<audio.policy.configuration.V7_0.AudioUsage> getPreferredUsage();
     method public java.util.List<audio.policy.configuration.V7_0.Profile> getProfile();
     method public audio.policy.configuration.V7_0.Role getRole();
-    method public void setFlags(String);
+    method public void setFlags(java.util.List<audio.policy.configuration.V7_0.AudioInOutFlag>);
     method public void setGains(audio.policy.configuration.V7_0.Gains);
     method public void setMaxActiveCount(long);
     method public void setMaxOpenCount(long);
@@ -327,14 +482,14 @@
 
   public class Profile {
     ctor public Profile();
-    method public String getChannelMasks();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioChannelMask> getChannelMasks();
     method public String getFormat();
     method public String getName();
-    method public String getSamplingRates();
-    method public void setChannelMasks(String);
+    method public java.util.List<java.math.BigInteger> getSamplingRates();
+    method public void setChannelMasks(java.util.List<audio.policy.configuration.V7_0.AudioChannelMask>);
     method public void setFormat(String);
     method public void setName(String);
-    method public void setSamplingRates(String);
+    method public void setSamplingRates(java.util.List<java.math.BigInteger>);
   }
 
   public class Reference {
@@ -365,24 +520,6 @@
     method public void setType(audio.policy.configuration.V7_0.MixType);
   }
 
-  public enum Stream {
-    method public String getRawName();
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_ACCESSIBILITY;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_ALARM;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_ASSISTANT;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_BLUETOOTH_SCO;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_DTMF;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_ENFORCED_AUDIBLE;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_MUSIC;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_NOTIFICATION;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_PATCH;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_REROUTING;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_RING;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_SYSTEM;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_TTS;
-    enum_constant public static final audio.policy.configuration.V7_0.Stream AUDIO_STREAM_VOICE_CALL;
-  }
-
   public class SurroundFormats {
     ctor public SurroundFormats();
     method public java.util.List<audio.policy.configuration.V7_0.SurroundFormats.Format> getFormat();
@@ -412,10 +549,10 @@
     method public audio.policy.configuration.V7_0.DeviceCategory getDeviceCategory();
     method public java.util.List<java.lang.String> getPoint();
     method public String getRef();
-    method public audio.policy.configuration.V7_0.Stream getStream();
+    method public audio.policy.configuration.V7_0.AudioStreamType getStream();
     method public void setDeviceCategory(audio.policy.configuration.V7_0.DeviceCategory);
     method public void setRef(String);
-    method public void setStream(audio.policy.configuration.V7_0.Stream);
+    method public void setStream(audio.policy.configuration.V7_0.AudioStreamType);
   }
 
   public class Volumes {
diff --git a/audio/7.0/config/audio_policy_configuration.xsd b/audio/7.0/config/audio_policy_configuration.xsd
index 19c6f70..6784828 100644
--- a/audio/7.0/config/audio_policy_configuration.xsd
+++ b/audio/7.0/config/audio_policy_configuration.xsd
@@ -13,7 +13,6 @@
          See the License for the specific language governing permissions and
          limitations under the License.
 -->
-<!-- TODO: define a targetNamespace. Note that it will break retrocompatibility -->
 <xs:schema version="2.0"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
@@ -27,7 +26,9 @@
     <xs:simpleType name="halVersion">
         <xs:annotation>
             <xs:documentation xml:lang="en">
-                Version of the interface the hal implements.
+                Version of the interface the hal implements. Note that this
+                relates to legacy HAL API versions since HIDL APIs are versioned
+                using other mechanisms.
             </xs:documentation>
         </xs:annotation>
         <xs:restriction base="xs:decimal">
@@ -154,17 +155,46 @@
             <xs:element name="item" type="xs:token" minOccurs="0" maxOccurs="unbounded"/>
         </xs:sequence>
     </xs:complexType>
-    <!-- TODO: separate values by space for better xsd validations. -->
-    <xs:simpleType name="audioInOutFlags">
+    <xs:simpleType name="audioInOutFlag">
         <xs:annotation>
             <xs:documentation xml:lang="en">
-                "|" separated list of audio_output_flags_t or audio_input_flags_t.
+              The flags indicate suggested stream attributes supported by the profile.
+              Use of AUDIO_{INPUT|OUTPUT}_FLAG_NONE in the XML file isn't required
+              as empty flag lists are allowed. However these constants are useful for
+              representing an empty enum value.
             </xs:documentation>
         </xs:annotation>
         <xs:restriction base="xs:string">
-            <xs:pattern value="|[_A-Z]+(\|[_A-Z]+)*"/>
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_NONE" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_DIRECT" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_PRIMARY" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_FAST" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_DEEP_BUFFER" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_NON_BLOCKING" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_HW_AV_SYNC" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_TTS" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_RAW" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_SYNC" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_IEC958_NONAUDIO" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_DIRECT_PCM" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_MMAP_NOIRQ" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_VOIP_RX" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_INCALL_MUSIC" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_NONE" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_FAST" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_HW_HOTWORD" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_RAW" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_SYNC" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_MMAP_NOIRQ" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_VOIP_TX" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_HW_AV_SYNC" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_DIRECT" />
         </xs:restriction>
     </xs:simpleType>
+    <xs:simpleType name="audioInOutFlags">
+        <xs:list itemType="audioInOutFlag" />
+    </xs:simpleType>
     <xs:simpleType name="role">
         <xs:restriction base="xs:string">
             <xs:enumeration value="sink"/>
@@ -212,9 +242,6 @@
             </xs:element>
         </xs:sequence>
     </xs:complexType>
-    <!-- Enum values of audio_device_t in audio.h
-         TODO: generate from hidl to avoid manual sync.
-         TODO: separate source and sink in the xml for better xsd validations. -->
     <xs:simpleType name="audioDevice">
         <xs:restriction base="xs:string">
             <xs:enumeration value="AUDIO_DEVICE_NONE"/>
@@ -229,8 +256,8 @@
             <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER"/>
-            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_DIGITAL"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_DIGITAL"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_USB_ACCESSORY"/>
@@ -249,17 +276,18 @@
             <xs:enumeration value="AUDIO_DEVICE_OUT_USB_HEADSET"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_HEARING_AID"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_ECHO_CANCELLER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLE_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLE_SPEAKER"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_DEFAULT"/>
             <xs:enumeration value="AUDIO_DEVICE_OUT_STUB"/>
 
-            <!-- Due to the xml format, IN types can not be a separated from OUT types -->
             <xs:enumeration value="AUDIO_DEVICE_IN_COMMUNICATION"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_AMBIENT"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_BUILTIN_MIC"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_WIRED_HEADSET"/>
-            <xs:enumeration value="AUDIO_DEVICE_IN_AUX_DIGITAL"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_AUX_DIGITAL"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_VOICE_CALL"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_TELEPHONY_RX"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_BACK_MIC"/>
@@ -281,6 +309,7 @@
             <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_BLE"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_HDMI_ARC"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_ECHO_REFERENCE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLE_HEADSET"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_DEFAULT"/>
             <xs:enumeration value="AUDIO_DEVICE_IN_STUB"/>
         </xs:restriction>
@@ -298,8 +327,6 @@
     <xs:simpleType name="extendableAudioDevice">
         <xs:union memberTypes="audioDevice vendorExtension"/>
     </xs:simpleType>
-    <!-- Enum values of audio_format_t in audio.h
-         TODO: generate from hidl to avoid manual sync. -->
     <xs:simpleType name="audioFormat">
         <xs:restriction base="xs:string">
             <xs:enumeration value="AUDIO_FORMAT_PCM_16_BIT" />
@@ -322,22 +349,14 @@
             <xs:enumeration value="AUDIO_FORMAT_AAC_LD"/>
             <xs:enumeration value="AUDIO_FORMAT_AAC_HE_V2"/>
             <xs:enumeration value="AUDIO_FORMAT_AAC_ELD"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_MAIN"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LC"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SSR"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LTP"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V1"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SCALABLE"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ERLC"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LD"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V2"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ELD"/>
-            <xs:enumeration value="AUDIO_FORMAT_VORBIS"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_XHE"/>
             <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V1"/>
             <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_VORBIS"/>
             <xs:enumeration value="AUDIO_FORMAT_OPUS"/>
             <xs:enumeration value="AUDIO_FORMAT_AC3"/>
             <xs:enumeration value="AUDIO_FORMAT_E_AC3"/>
+            <xs:enumeration value="AUDIO_FORMAT_E_AC3_JOC"/>
             <xs:enumeration value="AUDIO_FORMAT_DTS"/>
             <xs:enumeration value="AUDIO_FORMAT_DTS_HD"/>
             <xs:enumeration value="AUDIO_FORMAT_IEC61937"/>
@@ -357,17 +376,26 @@
             <xs:enumeration value="AUDIO_FORMAT_ALAC"/>
             <xs:enumeration value="AUDIO_FORMAT_APE"/>
             <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_MAIN"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SSR"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LTP"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SCALABLE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ERLC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ELD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_XHE"/>
             <xs:enumeration value="AUDIO_FORMAT_SBC"/>
             <xs:enumeration value="AUDIO_FORMAT_APTX"/>
             <xs:enumeration value="AUDIO_FORMAT_APTX_HD"/>
             <xs:enumeration value="AUDIO_FORMAT_AC4"/>
             <xs:enumeration value="AUDIO_FORMAT_LDAC"/>
-            <xs:enumeration value="AUDIO_FORMAT_E_AC3_JOC"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT"/>
             <xs:enumeration value="AUDIO_FORMAT_MAT_1_0"/>
             <xs:enumeration value="AUDIO_FORMAT_MAT_2_0"/>
             <xs:enumeration value="AUDIO_FORMAT_MAT_2_1"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_XHE"/>
-            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_XHE"/>
             <xs:enumeration value="AUDIO_FORMAT_AAC_LATM"/>
             <xs:enumeration value="AUDIO_FORMAT_AAC_LATM_LC"/>
             <xs:enumeration value="AUDIO_FORMAT_AAC_LATM_HE_V1"/>
@@ -377,14 +405,20 @@
             <xs:enumeration value="AUDIO_FORMAT_LHDC"/>
             <xs:enumeration value="AUDIO_FORMAT_LHDC_LL"/>
             <xs:enumeration value="AUDIO_FORMAT_APTX_TWSP"/>
+            <xs:enumeration value="AUDIO_FORMAT_LC3"/>
         </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="extendableAudioFormat">
         <xs:union memberTypes="audioFormat vendorExtension"/>
     </xs:simpleType>
-    <!-- Enum values of audio::common::4_0::AudioUsage
-         TODO: generate from HIDL to avoid manual sync. -->
     <xs:simpleType name="audioUsage">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Audio usage specifies the intended use case for the sound being played.
+                Please consult frameworks/base/media/java/android/media/AudioAttributes.java
+                for the description of each value.
+            </xs:documentation>
+        </xs:annotation>
         <xs:restriction base="xs:string">
             <xs:enumeration value="AUDIO_USAGE_UNKNOWN" />
             <xs:enumeration value="AUDIO_USAGE_MEDIA" />
@@ -399,49 +433,146 @@
             <xs:enumeration value="AUDIO_USAGE_GAME" />
             <xs:enumeration value="AUDIO_USAGE_VIRTUAL_SOURCE" />
             <xs:enumeration value="AUDIO_USAGE_ASSISTANT" />
+            <xs:enumeration value="AUDIO_USAGE_CALL_ASSISTANT" />
+            <xs:enumeration value="AUDIO_USAGE_EMERGENCY" />
+            <xs:enumeration value="AUDIO_USAGE_SAFETY" />
+            <xs:enumeration value="AUDIO_USAGE_VEHICLE_STATUS" />
+            <xs:enumeration value="AUDIO_USAGE_ANNOUNCEMENT" />
         </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="audioUsageList">
         <xs:list itemType="audioUsage"/>
     </xs:simpleType>
-    <!-- TODO: Change to a space separated list to xsd enforce correctness. -->
-    <xs:simpleType name="samplingRates">
-        <xs:restriction base="xs:string">
-            <xs:pattern value="[0-9]+(,[0-9]+)*"/>
-        </xs:restriction>
-    </xs:simpleType>
-    <!-- TODO: Change to a space separated list to xsd enforce correctness. -->
-    <xs:simpleType name="channelMask">
+    <xs:simpleType name="audioContentType">
         <xs:annotation>
             <xs:documentation xml:lang="en">
-                Comma (",") separated list of channel flags
-                from audio_channel_mask_t.
+                Audio content type expresses the general category of the content.
+                Please consult frameworks/base/media/java/android/media/AudioAttributes.java
+                for the description of each value.
             </xs:documentation>
         </xs:annotation>
         <xs:restriction base="xs:string">
-            <xs:pattern value="[_A-Z][_A-Z0-9]*(,[_A-Z][_A-Z0-9]*)*"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_UNKNOWN"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_SPEECH"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_MUSIC"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_MOVIE"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_SONIFICATION"/>
         </xs:restriction>
     </xs:simpleType>
+    <xs:simpleType name="samplingRates">
+        <xs:list itemType="xs:nonNegativeInteger" />
+    </xs:simpleType>
+    <xs:simpleType name="audioChannelMask">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Audio channel mask specifies presence of particular channels.
+                There are two representations:
+                - representation position (traditional discrete channel specification,
+                  e.g. "left", "right");
+                - indexed (this is similar to "tracks" in audio mixing, channels
+                  are represented using numbers).
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_CHANNEL_NONE"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_STEREO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_2POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_TRI"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_TRI_BACK"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_3POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_2POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_2POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_3POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_3POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_QUAD"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_QUAD_BACK"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_QUAD_SIDE"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_SURROUND"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_PENTA"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1_BACK"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1_SIDE"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1POINT4"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_6POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_7POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_7POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_7POINT1POINT4"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_MONO_HAPTIC_A"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_STEREO_HAPTIC_A"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_HAPTIC_AB"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_MONO_HAPTIC_AB"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_STEREO_HAPTIC_AB"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_STEREO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_FRONT_BACK"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_6"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_2POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_2POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_3POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_3POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_5POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_VOICE_UPLINK_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_VOICE_DNLINK_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_VOICE_CALL_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_3"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_4"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_5"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_6"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_7"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_8"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_9"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_10"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_11"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_12"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_13"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_14"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_15"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_16"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_17"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_18"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_19"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_20"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_21"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_22"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_23"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_24"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="channelMasks">
+        <xs:list itemType="audioChannelMask" />
+    </xs:simpleType>
     <xs:complexType name="profile">
         <xs:attribute name="name" type="xs:token" use="optional"/>
         <xs:attribute name="format" type="extendableAudioFormat" use="optional"/>
         <xs:attribute name="samplingRates" type="samplingRates" use="optional"/>
-        <xs:attribute name="channelMasks" type="channelMask" use="optional"/>
+        <xs:attribute name="channelMasks" type="channelMasks" use="optional"/>
     </xs:complexType>
-    <xs:simpleType name="gainMode">
+    <xs:simpleType name="audioGainMode">
         <xs:restriction base="xs:string">
             <xs:enumeration value="AUDIO_GAIN_MODE_JOINT"/>
             <xs:enumeration value="AUDIO_GAIN_MODE_CHANNELS"/>
             <xs:enumeration value="AUDIO_GAIN_MODE_RAMP"/>
         </xs:restriction>
     </xs:simpleType>
+    <xs:simpleType name="audioGainModeMaskUnrestricted">
+        <xs:list itemType="audioGainMode" />
+    </xs:simpleType>
+    <xs:simpleType name='audioGainModeMask'>
+        <xs:restriction base='audioGainModeMaskUnrestricted'>
+            <xs:minLength value='1' />
+        </xs:restriction>
+    </xs:simpleType>
     <xs:complexType name="gains">
         <xs:sequence>
             <xs:element name="gain" minOccurs="0" maxOccurs="unbounded">
                 <xs:complexType>
                     <xs:attribute name="name" type="xs:token" use="required"/>
-                    <xs:attribute name="mode" type="gainMode" use="required"/>
-                    <xs:attribute name="channel_mask" type="channelMask" use="optional"/>
+                    <xs:attribute name="mode" type="audioGainModeMask" use="required"/>
+                    <xs:attribute name="channel_mask" type="audioChannelMask" use="optional"/>
                     <xs:attribute name="minValueMB" type="xs:int" use="optional"/>
                     <xs:attribute name="maxValueMB" type="xs:int" use="optional"/>
                     <xs:attribute name="defaultValueMB" type="xs:int" use="optional"/>
@@ -537,9 +668,14 @@
             <xs:pattern value="([0-9]{1,2}|100),-?[0-9]+"/>
         </xs:restriction>
     </xs:simpleType>
-    <!-- Enum values of audio_stream_type_t in audio-base.h
-         TODO: generate from hidl to avoid manual sync. -->
-    <xs:simpleType name="stream">
+    <xs:simpleType name="audioStreamType">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Audio stream type describing the intended use case of a stream.
+                Please consult frameworks/base/media/java/android/media/AudioSystem.java
+                for the description of each value.
+            </xs:documentation>
+        </xs:annotation>
         <xs:restriction base="xs:string">
             <xs:enumeration value="AUDIO_STREAM_VOICE_CALL"/>
             <xs:enumeration value="AUDIO_STREAM_SYSTEM"/>
@@ -555,10 +691,35 @@
             <xs:enumeration value="AUDIO_STREAM_ASSISTANT"/>
             <xs:enumeration value="AUDIO_STREAM_REROUTING"/>
             <xs:enumeration value="AUDIO_STREAM_PATCH"/>
+            <xs:enumeration value="AUDIO_STREAM_CALL_ASSISTANT"/>
         </xs:restriction>
     </xs:simpleType>
-    <!-- Enum values of device_category from Volume.h.
-         TODO: generate from hidl to avoid manual sync. -->
+    <xs:simpleType name="audioSource">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                An audio source defines the intended use case for the sound being recorded.
+                Please consult frameworks/base/media/java/android/media/MediaRecorder.java
+                for the description of each value.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_SOURCE_DEFAULT"/>
+            <xs:enumeration value="AUDIO_SOURCE_MIC"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_UPLINK"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_DOWNLINK"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_SOURCE_CAMCORDER"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_RECOGNITION"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_COMMUNICATION"/>
+            <xs:enumeration value="AUDIO_SOURCE_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_SOURCE_UNPROCESSED"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_PERFORMANCE"/>
+            <xs:enumeration value="AUDIO_SOURCE_ECHO_REFERENCE"/>
+            <xs:enumeration value="AUDIO_SOURCE_FM_TUNER"/>
+            <xs:enumeration value="AUDIO_SOURCE_HOTWORD"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of device_category from Volume.h. -->
     <xs:simpleType name="deviceCategory">
         <xs:restriction base="xs:string">
             <xs:enumeration value="DEVICE_CATEGORY_HEADSET"/>
@@ -591,7 +752,7 @@
         <xs:sequence>
             <xs:element name="point" type="volumePoint" minOccurs="0" maxOccurs="unbounded"/>
         </xs:sequence>
-        <xs:attribute name="stream" type="stream"/>
+        <xs:attribute name="stream" type="audioStreamType"/>
         <xs:attribute name="deviceCategory" type="deviceCategory"/>
         <xs:attribute name="ref" type="xs:token" use="optional"/>
     </xs:complexType>
diff --git a/audio/7.0/config/update_audio_policy_config.sh b/audio/7.0/config/update_audio_policy_config.sh
new file mode 100755
index 0000000..051a0df
--- /dev/null
+++ b/audio/7.0/config/update_audio_policy_config.sh
@@ -0,0 +1,160 @@
+#!/bin/bash
+
+# Copyright (C) 2020 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script is used to update audio policy configuration files
+# to comply with the updated audio_policy_configuration.xsd from V7.0.
+#
+# The main difference is the separator used in lists for attributes.
+# Since the XML Schema Definition standard only allows space to be
+# used as a separator (see https://www.w3.org/TR/xmlschema11-2/#list-datatypes)
+# the previous versions used a regular expression to validate lists
+# in attribute values. E.g. the channel masks were validated using
+# the following regexp: [_A-Z][_A-Z0-9]*(,[_A-Z][_A-Z0-9]*)*
+# This has an obvious drawback of missing typos in the config file.
+#
+# The V7.0 has shifted to defining most of the frequently changed
+# types in the XSD schema only. This allows for verifying all the values
+# in lists, but in order to comply with XML Schema requirements
+# list elements must be separated by space.
+#
+# Since the APM config files typically use include directives,
+# the script must be pointed to the main APM config file and will
+# take care all the included files automatically.
+# If the included file is a shared version from 'frameworks/av',
+# instead of updating it the script checks if there is a newer
+# version with the corresponding name suffix (e.g.
+# 'a2dp_audio_policy_configuration_7_0.xml') and updates the include
+# path instead.
+
+set -euo pipefail
+
+if (echo "$@" | grep -qe -h); then
+    echo "This script will update Audio Policy Manager config file"
+    echo "to the format required by V7.0 XSD schema from a previous"
+    echo "version."
+    echo
+    echo "USAGE: $0 [APM_XML_FILE] [OLD_VERSION]"
+    echo "       APM_XML_FILE specifies the path to audio_policy_configuration.xml"
+    echo "                    relative to Android repository root"
+    echo "       OLD_VERSION specifies the version of schema currently used"
+    echo
+    echo "Example: $0 device/generic/goldfish/audio/policy/audio_policy_configuration.xml 6.0"
+    exit
+fi
+readonly HAL_DIRECTORY=hardware/interfaces/audio
+readonly SHARED_CONFIGS_DIRECTORY=frameworks/av/services/audiopolicy/config
+readonly OLD_VERSION=${2:-$(ls ${ANDROID_BUILD_TOP}/${HAL_DIRECTORY} | grep -E '[0-9]+\.[0-9]+' |
+                                sort -n | tail -n1)}
+readonly NEW_VERSION=7.0
+readonly NEW_VERSION_UNDERSCORE=7_0
+
+readonly SOURCE_CONFIG=${ANDROID_BUILD_TOP}/$1
+
+# First, validate the input using the schema of the current version
+
+echo Validating the source against the $OLD_VERSION schema
+xmllint --noout --xinclude \
+        --nofixup-base-uris --path "$ANDROID_BUILD_TOP/$SHARED_CONFIGS_DIRECTORY" \
+        --schema ${ANDROID_BUILD_TOP}/${HAL_DIRECTORY}/${OLD_VERSION}/config/audio_policy_configuration.xsd \
+        ${SOURCE_CONFIG}
+if [ $? -ne 0 ]; then
+    echo
+    echo "Config file fails validation for the specified version $OLD_VERSION--unsafe to update"
+    exit 1
+fi
+
+# Find all the source files recursively
+
+SOURCE_FILES=${SOURCE_CONFIG}
+SHARED_FILES=
+findIncludes() {
+    local FILES_TO_CHECK=
+    for F in $1; do
+        local FOUND_INCLUDES=$(grep -Po '<xi:include href="\K[^"]+(?="\/>)' ${F})
+        for I in ${FOUND_INCLUDES}; do
+            SOURCE_FULL_PATH=$(dirname ${F})/${I}
+            SHARED_FULL_PATH=${ANDROID_BUILD_TOP}/${SHARED_CONFIGS_DIRECTORY}/${I}
+            if [ -f "$SOURCE_FULL_PATH" ]; then
+                # Device-specific file.
+                SOURCE_FILES+=$'\n'${SOURCE_FULL_PATH}
+                FILES_TO_CHECK+=$'\n'${SOURCE_FULL_PATH}
+            elif [ -f "$SHARED_FULL_PATH" ]; then
+                # Shared file from the frameworks repo.
+                SHARED_FILES+=$'\n'${I}
+                FILES_TO_CHECK+=$'\n'${SHARED_FULL_PATH}
+            else
+                echo
+                echo "Include file not found: $I"
+                exit 1
+            fi
+        done
+    done
+    if [ "$FILES_TO_CHECK" ]; then
+        findIncludes "$FILES_TO_CHECK"
+    fi
+}
+findIncludes ${SOURCE_FILES}
+
+echo "Will update $1 and included device-specific files in place."
+echo "Will update paths to shared included files."
+echo "Press Ctrl-C to cancel, Enter to continue"
+read
+
+updateFile() {
+    FILE=$1
+    ATTR=$2
+    SEPARATOR=$3
+    SRC_LINES=$(grep -nPo "$ATTR=\"[^\"]+\"" ${FILE} || true)
+    for S in $SRC_LINES; do
+        # Prepare instruction for 'sed' for in-place editing of specified line
+        R=$(echo ${S} | sed -e 's/^[0-9]\+:/\//' | sed -e "s/$SEPARATOR/ /g")
+        S=$(echo ${S} | sed -e 's/:/s\//')${R}/
+        echo ${S} | sed -i -f - ${FILE}
+    done
+}
+for F in $SOURCE_FILES; do
+    updateFile ${F} "channelMasks" ","
+    updateFile ${F} "samplingRates" ","
+    updateFile ${F} "flags" "|"
+done;
+
+updateIncludes() {
+    FILE=$1
+    for I in $SHARED_FILES; do
+        NEW_VERSION_I=${I%.*}_${NEW_VERSION_UNDERSCORE}.${I##*.}
+        if [ -e "$ANDROID_BUILD_TOP/$SHARED_CONFIGS_DIRECTORY/$NEW_VERSION_I" ]; then
+            echo "s/$I/$NEW_VERSION_I/g" | sed -i -f - ${FILE}
+        fi
+    done
+}
+for F in $SOURCE_FILES; do
+    updateIncludes ${F}
+done
+
+# Validate the results against the new schema
+
+echo Validating the result against the $NEW_VERSION schema
+xmllint --noout --xinclude \
+        --nofixup-base-uris --path "$ANDROID_BUILD_TOP/$SHARED_CONFIGS_DIRECTORY" \
+        --schema ${ANDROID_BUILD_TOP}/${HAL_DIRECTORY}/${NEW_VERSION}/config/audio_policy_configuration.xsd \
+        ${SOURCE_CONFIG}
+if [ $? -ne 0 ]; then
+    echo
+    echo "Config file fails validation for the specified version $NEW_VERSION--please check the changes"
+    exit 1
+fi
+echo
+echo "Please check the diff and update path to APM shared files in the device makefile!"
diff --git a/audio/7.0/types.hal b/audio/7.0/types.hal
index b0b0843..4a9e289 100644
--- a/audio/7.0/types.hal
+++ b/audio/7.0/types.hal
@@ -355,3 +355,17 @@
      */
     TimestretchFallbackMode fallbackMode;
 };
+
+/**
+ * The audio flags serve two purposes:
+ *
+ *  - when a stream is created they indicate its attributes;
+ *
+ *  - when present in a profile descriptor listed for a particular audio
+ *    hardware module, they indicate that a stream can be opened that
+ *    supports the attributes indicated by the flags.
+ *
+ * See 'audioIoFlag' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioInOutFlag;
diff --git a/audio/README b/audio/README
deleted file mode 100644
index afafbe3..0000000
--- a/audio/README
+++ /dev/null
@@ -1,36 +0,0 @@
-Directory structure of the audio HIDL related code.
-
-Run `common/all-versions/copyHAL.sh` to create a new version of the audio HAL
-based on an existing one.
-
-audio
-|-- 2.0              <== core 2.0 HIDL API. .hal can not be moved into the core directory
-|                        because that would change its namespace and include path
-|-- 4.0              <== Version 4.0 of the core API
-|
-|-- ...
-|
-|-- common           <== code common to audio core and effect API
-|   |-- 2.0          <== HIDL API of V2
-|   |-- 4.0
-|   |-- ...
-|   `-- all-versions <== code common to all version of both core and effect API
-|       |-- default  <== implementation shared code between core and effect impl
-|       |-- test     <== utilities used by tests
-|       `-- util     <== utilities used by both implementation and tests
-|
-|-- core             <== VTS and default implementation of the core API (not HIDL, see /audio/2.0))
-|   `-- all-versions <== Code is version independent through #if and separate files
-|       |-- default  <== code that wraps the legacy API
-|       `-- vts      <== vts of core API
-|           |-- 2.0  <== 2.0 specific tests and helpers
-|           |-- 4.0
-|           |-- ...
-|
-`-- effect           <== idem for the effect API
-    |-- 2.0
-    |-- 4.0
-    |-- ...
-    `-- all-versions
-        |-- default
-        `-- vts
diff --git a/audio/README.md b/audio/README.md
new file mode 100644
index 0000000..b77b9ba
--- /dev/null
+++ b/audio/README.md
@@ -0,0 +1,53 @@
+# Audio HAL
+
+Directory structure of the audio HAL related code.
+
+Run `common/all-versions/copyHAL.sh` to create a new version of the audio HAL
+based on an existing one.
+
+## Directory Structure
+
+* `2.0` -- version 2.0 of the core HIDL API. Note that `.hal` files
+  can not be moved into the `core` directory because that would change
+  its namespace and include path.
+   - `config` -- the XSD schema for the Audio Policy Manager
+     configuration file.
+* `4.0` -- version 4.0 of the core HIDL API.
+* ...
+* `common` -- common types for audio core and effect HIDL API.
+   - `2.0` -- version 2.0 of the common types HIDL API.
+   - `4.0` -- version 4.0.
+   - ...
+   - `7.0` -- version 7.0.
+      - `example` -- example implementation of the core and effect
+        V7.0 API. It represents a "fake" audio HAL that doesn't
+        actually communicate with hardware.
+   - `all-versions` -- code common to all version of both core and effect API.
+      - `default` -- shared code of the default implementation.
+         - `service` -- vendor HAL service for hosting the default
+           implementation.
+      - `test` -- utilities used by tests.
+      - `util` -- utilities used by both implementation and tests.
+* `core` -- VTS tests and the default implementation of the core API
+  (not HIDL API, it's in `audio/N.M`).
+   - `7.0` -- code specific to version V7.0 of the core HIDL API
+   - `all-versions` -- the code is common between all versions,
+     version-specific parts are enclosed into conditional directives
+     of preprocessor or reside in dedicated files.
+       - `default` -- code that wraps the legacy API (from
+         `hardware/libhardware`).
+       - `vts` VTS tests for the core HIDL API.
+* `effect` -- same for the effect HIDL API.
+   - `2.0`
+      - `config` -- the XSD schema for the Audio Effects configuration
+        file.
+   - `4.0`
+   - ...
+   - `all-versions`
+      - `default`
+      - `vts`
+* `policy` -- Configurable Audio Policy schemes.
+   - `1.0` -- note that versions of CAP are not linked to the versions
+     of audio HAL.
+      - `vts` -- VTS tests for validating actual configuration files.
+      - `xml` -- XSD schemas for CAP configuration files.
diff --git a/audio/common/7.0/Android.bp b/audio/common/7.0/Android.bp
index e24871c..1c016b4 100644
--- a/audio/common/7.0/Android.bp
+++ b/audio/common/7.0/Android.bp
@@ -16,9 +16,12 @@
 cc_library {
     name: "android.hardware.audio.common@7.0-enums",
     vendor_available: true,
-    generated_sources: ["audio_policy_configuration_V7_0"],
     generated_headers: ["audio_policy_configuration_V7_0"],
+    generated_sources: ["audio_policy_configuration_V7_0"],
     header_libs: ["libxsdc-utils"],
+    export_generated_headers: ["audio_policy_configuration_V7_0"],
+    export_header_lib_headers: ["libxsdc-utils"],
+    export_include_dirs: ["enums/include"],
     shared_libs: [
         "libbase",
         "liblog",
diff --git a/audio/common/7.0/enums/include/audio_policy_configuration_V7_0-enums.h b/audio/common/7.0/enums/include/audio_policy_configuration_V7_0-enums.h
new file mode 100644
index 0000000..cedcab3
--- /dev/null
+++ b/audio/common/7.0/enums/include/audio_policy_configuration_V7_0-enums.h
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef AUDIO_POLICY_CONFIGURATION_V7_0_ENUMS_H
+#define AUDIO_POLICY_CONFIGURATION_V7_0_ENUMS_H
+
+#include <sys/types.h>
+
+#include <audio_policy_configuration_V7_0.h>
+
+namespace audio::policy::configuration::V7_0 {
+
+static inline size_t getChannelCount(AudioChannelMask mask) {
+    switch (mask) {
+        case AudioChannelMask::AUDIO_CHANNEL_NONE:
+            return 0;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_MONO:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_MONO:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_1:
+            return 1;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_STEREO:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_MONO_HAPTIC_A:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_HAPTIC_AB:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_STEREO:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_FRONT_BACK:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_VOICE_UPLINK_MONO:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_VOICE_DNLINK_MONO:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_VOICE_CALL_MONO:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_2:
+            return 2;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_2POINT1:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_STEREO_HAPTIC_A:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_MONO_HAPTIC_AB:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_TRI:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_TRI_BACK:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_3:
+            return 3;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_2POINT0POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_3POINT1:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_QUAD:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_QUAD_BACK:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_QUAD_SIDE:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_SURROUND:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_STEREO_HAPTIC_AB:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_2POINT0POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_4:
+            return 4;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_2POINT1POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_3POINT0POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_PENTA:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_2POINT1POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_3POINT0POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_5:
+            return 5;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_3POINT1POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_5POINT1:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_5POINT1_BACK:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_5POINT1_SIDE:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_6:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_3POINT1POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_IN_5POINT1:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_6:
+            return 6;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_6POINT1:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_7:
+            return 7;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_5POINT1POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_7POINT1:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_8:
+            return 8;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_9:
+            return 9;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_5POINT1POINT4:
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_7POINT1POINT2:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_10:
+            return 10;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_11:
+            return 11;
+        case AudioChannelMask::AUDIO_CHANNEL_OUT_7POINT1POINT4:
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_12:
+            return 12;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_13:
+            return 13;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_14:
+            return 14;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_15:
+            return 15;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_16:
+            return 16;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_17:
+            return 17;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_18:
+            return 18;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_19:
+            return 19;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_20:
+            return 20;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_21:
+            return 21;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_22:
+            return 22;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_23:
+            return 23;
+        case AudioChannelMask::AUDIO_CHANNEL_INDEX_MASK_24:
+            return 24;
+        case AudioChannelMask::UNKNOWN:
+            return 0;
+            // No default to make sure all cases are covered.
+    }
+    // This is to avoid undefined behavior if 'mask' isn't a valid enum value.
+    return 0;
+}
+
+static inline ssize_t getChannelCount(const std::string& mask) {
+    return getChannelCount(stringToAudioChannelMask(mask));
+}
+
+static inline bool isOutputDevice(AudioDevice device) {
+    switch (device) {
+        case AudioDevice::UNKNOWN:
+        case AudioDevice::AUDIO_DEVICE_NONE:
+            return false;
+        case AudioDevice::AUDIO_DEVICE_OUT_EARPIECE:
+        case AudioDevice::AUDIO_DEVICE_OUT_SPEAKER:
+        case AudioDevice::AUDIO_DEVICE_OUT_WIRED_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_OUT_WIRED_HEADPHONE:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLUETOOTH_SCO:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLUETOOTH_A2DP:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER:
+        case AudioDevice::AUDIO_DEVICE_OUT_AUX_DIGITAL:
+        case AudioDevice::AUDIO_DEVICE_OUT_HDMI:
+        case AudioDevice::AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_OUT_USB_ACCESSORY:
+        case AudioDevice::AUDIO_DEVICE_OUT_USB_DEVICE:
+        case AudioDevice::AUDIO_DEVICE_OUT_REMOTE_SUBMIX:
+        case AudioDevice::AUDIO_DEVICE_OUT_TELEPHONY_TX:
+        case AudioDevice::AUDIO_DEVICE_OUT_LINE:
+        case AudioDevice::AUDIO_DEVICE_OUT_HDMI_ARC:
+        case AudioDevice::AUDIO_DEVICE_OUT_SPDIF:
+        case AudioDevice::AUDIO_DEVICE_OUT_FM:
+        case AudioDevice::AUDIO_DEVICE_OUT_AUX_LINE:
+        case AudioDevice::AUDIO_DEVICE_OUT_SPEAKER_SAFE:
+        case AudioDevice::AUDIO_DEVICE_OUT_IP:
+        case AudioDevice::AUDIO_DEVICE_OUT_BUS:
+        case AudioDevice::AUDIO_DEVICE_OUT_PROXY:
+        case AudioDevice::AUDIO_DEVICE_OUT_USB_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_OUT_HEARING_AID:
+        case AudioDevice::AUDIO_DEVICE_OUT_ECHO_CANCELLER:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLE_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_OUT_BLE_SPEAKER:
+        case AudioDevice::AUDIO_DEVICE_OUT_DEFAULT:
+        case AudioDevice::AUDIO_DEVICE_OUT_STUB:
+            return true;
+        case AudioDevice::AUDIO_DEVICE_IN_COMMUNICATION:
+        case AudioDevice::AUDIO_DEVICE_IN_AMBIENT:
+        case AudioDevice::AUDIO_DEVICE_IN_BUILTIN_MIC:
+        case AudioDevice::AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_IN_WIRED_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_IN_AUX_DIGITAL:
+        case AudioDevice::AUDIO_DEVICE_IN_HDMI:
+        case AudioDevice::AUDIO_DEVICE_IN_VOICE_CALL:
+        case AudioDevice::AUDIO_DEVICE_IN_TELEPHONY_RX:
+        case AudioDevice::AUDIO_DEVICE_IN_BACK_MIC:
+        case AudioDevice::AUDIO_DEVICE_IN_REMOTE_SUBMIX:
+        case AudioDevice::AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_IN_USB_ACCESSORY:
+        case AudioDevice::AUDIO_DEVICE_IN_USB_DEVICE:
+        case AudioDevice::AUDIO_DEVICE_IN_FM_TUNER:
+        case AudioDevice::AUDIO_DEVICE_IN_TV_TUNER:
+        case AudioDevice::AUDIO_DEVICE_IN_LINE:
+        case AudioDevice::AUDIO_DEVICE_IN_SPDIF:
+        case AudioDevice::AUDIO_DEVICE_IN_BLUETOOTH_A2DP:
+        case AudioDevice::AUDIO_DEVICE_IN_LOOPBACK:
+        case AudioDevice::AUDIO_DEVICE_IN_IP:
+        case AudioDevice::AUDIO_DEVICE_IN_BUS:
+        case AudioDevice::AUDIO_DEVICE_IN_PROXY:
+        case AudioDevice::AUDIO_DEVICE_IN_USB_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_IN_BLUETOOTH_BLE:
+        case AudioDevice::AUDIO_DEVICE_IN_HDMI_ARC:
+        case AudioDevice::AUDIO_DEVICE_IN_ECHO_REFERENCE:
+        case AudioDevice::AUDIO_DEVICE_IN_BLE_HEADSET:
+        case AudioDevice::AUDIO_DEVICE_IN_DEFAULT:
+        case AudioDevice::AUDIO_DEVICE_IN_STUB:
+            return false;
+            // No default to make sure all cases are covered.
+    }
+    // This is to avoid undefined behavior if 'device' isn't a valid enum value.
+    return false;
+}
+
+static inline bool isOutputDevice(const std::string& device) {
+    return isOutputDevice(stringToAudioDevice(device));
+}
+
+}  // namespace audio::policy::configuration::V7_0
+
+#endif  // AUDIO_POLICY_CONFIGURATION_V7_0_ENUMS_H
diff --git a/audio/common/7.0/example/Android.bp b/audio/common/7.0/example/Android.bp
new file mode 100644
index 0000000..03c1cd8
--- /dev/null
+++ b/audio/common/7.0/example/Android.bp
@@ -0,0 +1,45 @@
+//
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_binary {
+    name: "android.hardware.audio@7.0-service.example",
+    vendor: true,
+    relative_install_path: "hw",
+    init_rc: ["android.hardware.audio@7.0-service.example.rc"],
+    vintf_fragments: ["android.hardware.audio@7.0-service.example.xml"],
+    srcs: [
+        "DevicesFactory.cpp",
+        "Effect.cpp",
+        "EffectsFactory.cpp",
+        "EqualizerEffect.cpp",
+        "LoudnessEnhancerEffect.cpp",
+        "service.cpp",
+    ],
+    cflags: [
+        "-Wall",
+        "-Werror",
+    ],
+    shared_libs: [
+        "libcutils",
+        "libhidlbase",
+        "liblog",
+        "libxml2",
+        "libutils",
+        "android.hardware.audio@7.0",
+        "android.hardware.audio.common@7.0",
+        "android.hardware.audio.common@7.0-enums",
+        "android.hardware.audio.effect@7.0",
+    ],
+}
diff --git a/audio/common/7.0/example/DevicesFactory.cpp b/audio/common/7.0/example/DevicesFactory.cpp
new file mode 100644
index 0000000..ddd5fef
--- /dev/null
+++ b/audio/common/7.0/example/DevicesFactory.cpp
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "DevicesFactory7.0"
+#include <log/log.h>
+
+#include "DevicesFactory.h"
+
+using ::android::hardware::hidl_string;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+
+namespace android::hardware::audio::V7_0::implementation {
+
+Return<void> DevicesFactory::openDevice(const hidl_string& device, openDevice_cb _hidl_cb) {
+    (void)device;
+    _hidl_cb(Result::INVALID_ARGUMENTS, nullptr);
+    return Void();
+}
+
+Return<void> DevicesFactory::openPrimaryDevice(openPrimaryDevice_cb _hidl_cb) {
+    _hidl_cb(Result::INVALID_ARGUMENTS, nullptr);
+    return Void();
+}
+
+}  // namespace android::hardware::audio::V7_0::implementation
diff --git a/audio/common/7.0/example/DevicesFactory.h b/audio/common/7.0/example/DevicesFactory.h
new file mode 100644
index 0000000..00f665c
--- /dev/null
+++ b/audio/common/7.0/example/DevicesFactory.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android/hardware/audio/7.0/IDevicesFactory.h>
+
+namespace android::hardware::audio::V7_0::implementation {
+
+class DevicesFactory : public IDevicesFactory {
+  public:
+    DevicesFactory() = default;
+
+    ::android::hardware::Return<void> openDevice(const ::android::hardware::hidl_string& device,
+                                                 openDevice_cb _hidl_cb) override;
+
+    ::android::hardware::Return<void> openPrimaryDevice(openPrimaryDevice_cb _hidl_cb) override;
+};
+
+}  // namespace android::hardware::audio::V7_0::implementation
diff --git a/audio/common/7.0/example/Effect.cpp b/audio/common/7.0/example/Effect.cpp
new file mode 100644
index 0000000..423754d
--- /dev/null
+++ b/audio/common/7.0/example/Effect.cpp
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "EffectsFactory7.0"
+#include <log/log.h>
+
+#include <audio_policy_configuration_V7_0.h>
+
+#include "Effect.h"
+
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using namespace ::android::hardware::audio::common::V7_0;
+// Make an alias for enumerations generated from the APM config XSD.
+namespace xsd {
+using namespace ::audio::policy::configuration::V7_0;
+}
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+Return<Result> Effect::init() {
+    return Result::OK;
+}
+
+Return<Result> Effect::setConfig(
+        const EffectConfig& config,
+        const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+        const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) {
+    (void)config;
+    (void)inputBufferProvider;
+    (void)outputBufferProvider;
+    return Result::OK;
+}
+
+Return<Result> Effect::reset() {
+    return Result::OK;
+}
+
+Return<Result> Effect::enable() {
+    if (!mEnabled) {
+        mEnabled = true;
+        return Result::OK;
+    } else {
+        return Result::NOT_SUPPORTED;
+    }
+}
+
+Return<Result> Effect::disable() {
+    if (mEnabled) {
+        mEnabled = false;
+        return Result::OK;
+    } else {
+        return Result::NOT_SUPPORTED;
+    }
+}
+
+Return<Result> Effect::setDevice(const DeviceAddress& device) {
+    (void)device;
+    return Result::OK;
+}
+
+Return<void> Effect::setAndGetVolume(const hidl_vec<uint32_t>& volumes,
+                                     setAndGetVolume_cb _hidl_cb) {
+    (void)volumes;
+    _hidl_cb(Result::OK, hidl_vec<uint32_t>{});
+    return Void();
+}
+
+Return<Result> Effect::volumeChangeNotification(const hidl_vec<uint32_t>& volumes) {
+    (void)volumes;
+    return Result::OK;
+}
+
+Return<Result> Effect::setAudioMode(AudioMode mode) {
+    (void)mode;
+    return Result::OK;
+}
+
+Return<Result> Effect::setConfigReverse(
+        const EffectConfig& config,
+        const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+        const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) {
+    (void)config;
+    (void)inputBufferProvider;
+    (void)outputBufferProvider;
+    return Result::OK;
+}
+
+Return<Result> Effect::setInputDevice(const DeviceAddress& device) {
+    (void)device;
+    return Result::OK;
+}
+
+Return<void> Effect::getConfig(getConfig_cb _hidl_cb) {
+    const EffectConfig config = {{} /* inputCfg */,
+                                 // outputCfg
+                                 {{} /* buffer */,
+                                  48000 /* samplingRateHz */,
+                                  toString(xsd::AudioChannelMask::AUDIO_CHANNEL_OUT_STEREO),
+                                  toString(xsd::AudioFormat::AUDIO_FORMAT_PCM_16_BIT),
+                                  EffectBufferAccess::ACCESS_ACCUMULATE,
+                                  0 /* mask */}};
+    _hidl_cb(Result::OK, config);
+    return Void();
+}
+
+Return<void> Effect::getConfigReverse(getConfigReverse_cb _hidl_cb) {
+    _hidl_cb(Result::OK, EffectConfig{});
+    return Void();
+}
+
+Return<void> Effect::getSupportedAuxChannelsConfigs(uint32_t maxConfigs,
+                                                    getSupportedAuxChannelsConfigs_cb _hidl_cb) {
+    (void)maxConfigs;
+    _hidl_cb(Result::OK, hidl_vec<EffectAuxChannelsConfig>{});
+    return Void();
+}
+
+Return<void> Effect::getAuxChannelsConfig(getAuxChannelsConfig_cb _hidl_cb) {
+    _hidl_cb(Result::OK, EffectAuxChannelsConfig{});
+    return Void();
+}
+
+Return<Result> Effect::setAuxChannelsConfig(const EffectAuxChannelsConfig& config) {
+    (void)config;
+    return Result::OK;
+}
+
+Return<Result> Effect::setAudioSource(const hidl_string& source) {
+    (void)source;
+    return Result::OK;
+}
+
+Return<Result> Effect::offload(const EffectOffloadParameter& param) {
+    (void)param;
+    return Result::OK;
+}
+
+Return<void> Effect::getDescriptor(getDescriptor_cb _hidl_cb) {
+    _hidl_cb(Result::OK, mDescriptor);
+    return Void();
+}
+
+Return<void> Effect::prepareForProcessing(prepareForProcessing_cb _hidl_cb) {
+    _hidl_cb(Result::OK, MQDescriptor<Result, kSynchronizedReadWrite>{});
+    return Void();
+}
+
+Return<Result> Effect::setProcessBuffers(const AudioBuffer& inBuffer,
+                                         const AudioBuffer& outBuffer) {
+    (void)inBuffer;
+    (void)outBuffer;
+    return Result::OK;
+}
+
+Return<void> Effect::command(uint32_t commandId, const hidl_vec<uint8_t>& data,
+                             uint32_t resultMaxSize, command_cb _hidl_cb) {
+    (void)commandId;
+    (void)data;
+    (void)resultMaxSize;
+    _hidl_cb(-EINVAL, hidl_vec<uint8_t>{});
+    return Void();
+}
+
+Return<Result> Effect::setParameter(const hidl_vec<uint8_t>& parameter,
+                                    const hidl_vec<uint8_t>& value) {
+    (void)parameter;
+    (void)value;
+    return Result::OK;
+}
+
+Return<void> Effect::getParameter(const hidl_vec<uint8_t>& parameter, uint32_t valueMaxSize,
+                                  getParameter_cb _hidl_cb) {
+    (void)parameter;
+    (void)valueMaxSize;
+    _hidl_cb(Result::OK, hidl_vec<uint8_t>{});
+    return Void();
+}
+
+Return<void> Effect::getSupportedConfigsForFeature(uint32_t featureId, uint32_t maxConfigs,
+                                                   uint32_t configSize,
+                                                   getSupportedConfigsForFeature_cb _hidl_cb) {
+    (void)featureId;
+    (void)maxConfigs;
+    (void)configSize;
+    _hidl_cb(Result::OK, 0, hidl_vec<uint8_t>{});
+    return Void();
+}
+
+Return<void> Effect::getCurrentConfigForFeature(uint32_t featureId, uint32_t configSize,
+                                                getCurrentConfigForFeature_cb _hidl_cb) {
+    (void)featureId;
+    (void)configSize;
+    _hidl_cb(Result::OK, hidl_vec<uint8_t>{});
+    return Void();
+}
+
+Return<Result> Effect::setCurrentConfigForFeature(uint32_t featureId,
+                                                  const hidl_vec<uint8_t>& configData) {
+    (void)featureId;
+    (void)configData;
+    return Result::OK;
+}
+
+Return<Result> Effect::close() {
+    return Result::OK;
+}
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/Effect.h b/audio/common/7.0/example/Effect.h
new file mode 100644
index 0000000..fa7f41b
--- /dev/null
+++ b/audio/common/7.0/example/Effect.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android/hardware/audio/effect/7.0/IEffect.h>
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+class Effect : public IEffect {
+  public:
+    explicit Effect(const EffectDescriptor& descriptor) : mDescriptor(descriptor) {}
+
+    ::android::hardware::Return<Result> init() override;
+    ::android::hardware::Return<Result> setConfig(
+            const EffectConfig& config,
+            const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+            const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) override;
+    ::android::hardware::Return<Result> reset() override;
+    ::android::hardware::Return<Result> enable() override;
+    ::android::hardware::Return<Result> disable() override;
+    ::android::hardware::Return<Result> setDevice(
+            const ::android::hardware::audio::common::V7_0::DeviceAddress& device) override;
+    ::android::hardware::Return<void> setAndGetVolume(
+            const ::android::hardware::hidl_vec<uint32_t>& volumes,
+            setAndGetVolume_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> volumeChangeNotification(
+            const ::android::hardware::hidl_vec<uint32_t>& volumes) override;
+    ::android::hardware::Return<Result> setAudioMode(
+            ::android::hardware::audio::common::V7_0::AudioMode mode) override;
+    ::android::hardware::Return<Result> setConfigReverse(
+            const EffectConfig& config,
+            const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+            const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) override;
+    ::android::hardware::Return<Result> setInputDevice(
+            const ::android::hardware::audio::common::V7_0::DeviceAddress& device) override;
+    ::android::hardware::Return<void> getConfig(getConfig_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getConfigReverse(getConfigReverse_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getSupportedAuxChannelsConfigs(
+            uint32_t maxConfigs, getSupportedAuxChannelsConfigs_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getAuxChannelsConfig(
+            getAuxChannelsConfig_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> setAuxChannelsConfig(
+            const EffectAuxChannelsConfig& config) override;
+    ::android::hardware::Return<Result> setAudioSource(
+            const ::android::hardware::hidl_string& source) override;
+    ::android::hardware::Return<Result> offload(const EffectOffloadParameter& param) override;
+    ::android::hardware::Return<void> getDescriptor(getDescriptor_cb _hidl_cb) override;
+    ::android::hardware::Return<void> prepareForProcessing(
+            prepareForProcessing_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> setProcessBuffers(const AudioBuffer& inBuffer,
+                                                          const AudioBuffer& outBuffer) override;
+    ::android::hardware::Return<void> command(uint32_t commandId,
+                                              const ::android::hardware::hidl_vec<uint8_t>& data,
+                                              uint32_t resultMaxSize, command_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> setParameter(
+            const ::android::hardware::hidl_vec<uint8_t>& parameter,
+            const ::android::hardware::hidl_vec<uint8_t>& value) override;
+    ::android::hardware::Return<void> getParameter(
+            const ::android::hardware::hidl_vec<uint8_t>& parameter, uint32_t valueMaxSize,
+            getParameter_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getSupportedConfigsForFeature(
+            uint32_t featureId, uint32_t maxConfigs, uint32_t configSize,
+            getSupportedConfigsForFeature_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getCurrentConfigForFeature(
+            uint32_t featureId, uint32_t configSize,
+            getCurrentConfigForFeature_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> setCurrentConfigForFeature(
+            uint32_t featureId, const ::android::hardware::hidl_vec<uint8_t>& configData) override;
+    ::android::hardware::Return<Result> close() override;
+
+  private:
+    const EffectDescriptor mDescriptor;
+    bool mEnabled = false;
+};
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/EffectsFactory.cpp b/audio/common/7.0/example/EffectsFactory.cpp
new file mode 100644
index 0000000..7d333ae
--- /dev/null
+++ b/audio/common/7.0/example/EffectsFactory.cpp
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "EffectsFactory7.0"
+#include <log/log.h>
+
+#include "EffectsFactory.h"
+#include "EqualizerEffect.h"
+#include "LoudnessEnhancerEffect.h"
+
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using namespace ::android::hardware::audio::common::V7_0;
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+Return<void> EffectsFactory::getAllDescriptors(getAllDescriptors_cb _hidl_cb) {
+    hidl_vec<EffectDescriptor> descriptors;
+    descriptors.resize(2);
+    descriptors[0] = EqualizerEffect::getDescriptor();
+    descriptors[1] = LoudnessEnhancerEffect::getDescriptor();
+    _hidl_cb(Result::OK, descriptors);
+    return Void();
+}
+
+Return<void> EffectsFactory::getDescriptor(const Uuid& uuid, getDescriptor_cb _hidl_cb) {
+    if (auto desc = EqualizerEffect::getDescriptor(); uuid == desc.type || uuid == desc.uuid) {
+        _hidl_cb(Result::OK, desc);
+    } else if (auto desc = LoudnessEnhancerEffect::getDescriptor();
+               uuid == desc.type || uuid == desc.uuid) {
+        _hidl_cb(Result::OK, desc);
+    } else {
+        _hidl_cb(Result::INVALID_ARGUMENTS, EffectDescriptor{});
+    }
+    return Void();
+}
+
+Return<void> EffectsFactory::createEffect(const Uuid& uuid, int32_t session, int32_t ioHandle,
+                                          int32_t device, createEffect_cb _hidl_cb) {
+    (void)session;
+    (void)ioHandle;
+    (void)device;
+    if (auto desc = EqualizerEffect::getDescriptor(); uuid == desc.type || uuid == desc.uuid) {
+        _hidl_cb(Result::OK, new EqualizerEffect(), 0);
+    } else if (auto desc = LoudnessEnhancerEffect::getDescriptor();
+               uuid == desc.type || uuid == desc.uuid) {
+        _hidl_cb(Result::OK, new LoudnessEnhancerEffect(), 0);
+    } else {
+        _hidl_cb(Result::INVALID_ARGUMENTS, nullptr, 0);
+    }
+    return Void();
+}
+
+Return<void> EffectsFactory::debug(const hidl_handle& fd, const hidl_vec<hidl_string>& options) {
+    (void)fd;
+    (void)options;
+    return Void();
+}
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/EffectsFactory.h b/audio/common/7.0/example/EffectsFactory.h
new file mode 100644
index 0000000..8fec70c
--- /dev/null
+++ b/audio/common/7.0/example/EffectsFactory.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android/hardware/audio/effect/7.0/IEffectsFactory.h>
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+class EffectsFactory : public IEffectsFactory {
+  public:
+    EffectsFactory() = default;
+
+    ::android::hardware::Return<void> getAllDescriptors(getAllDescriptors_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getDescriptor(
+            const ::android::hardware::audio::common::V7_0::Uuid& uuid,
+            getDescriptor_cb _hidl_cb) override;
+    ::android::hardware::Return<void> createEffect(
+            const ::android::hardware::audio::common::V7_0::Uuid& uuid, int32_t session,
+            int32_t ioHandle, int32_t device, createEffect_cb _hidl_cb) override;
+    ::android::hardware::Return<void>
+    debug(const ::android::hardware::hidl_handle& fd,
+          const ::android::hardware::hidl_vec<::android::hardware::hidl_string>& options) override;
+};
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/EqualizerEffect.cpp b/audio/common/7.0/example/EqualizerEffect.cpp
new file mode 100644
index 0000000..c93c5a9
--- /dev/null
+++ b/audio/common/7.0/example/EqualizerEffect.cpp
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <limits>
+
+#define LOG_TAG "EffectsFactory7.0"
+#include <log/log.h>
+
+#include "EqualizerEffect.h"
+
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using namespace ::android::hardware::audio::common::V7_0;
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+const EffectDescriptor& EqualizerEffect::getDescriptor() {
+    // Note: for VTS tests only 'type' and 'uuid' fields are required.
+    // The actual implementation must provide meaningful values
+    // for all fields of the descriptor.
+    static const EffectDescriptor descriptor = {
+            .type =
+                    {// Same UUID as AudioEffect.EFFECT_TYPE_EQUALIZER in Java.
+                     0x0bed4300, 0xddd6, 0x11db, 0x8f34,
+                     std::array<uint8_t, 6>{{0x00, 0x02, 0xa5, 0xd5, 0xc5, 0x1b}}},
+            .uuid = {0, 0, 0, 1, std::array<uint8_t, 6>{{0, 0, 0, 0, 0, 0}}}};
+    return descriptor;
+}
+
+EqualizerEffect::EqualizerEffect() : mEffect(new Effect(getDescriptor())) {
+    mProperties.bandLevels.resize(kNumBands);
+}
+
+Return<void> EqualizerEffect::getNumBands(getNumBands_cb _hidl_cb) {
+    _hidl_cb(Result::OK, kNumBands);
+    return Void();
+}
+
+Return<void> EqualizerEffect::getLevelRange(getLevelRange_cb _hidl_cb) {
+    _hidl_cb(Result::OK, std::numeric_limits<int16_t>::min(), std::numeric_limits<int16_t>::max());
+    return Void();
+}
+
+Return<Result> EqualizerEffect::setBandLevel(uint16_t band, int16_t level) {
+    if (band < kNumBands) {
+        mProperties.bandLevels[band] = level;
+        return Result::OK;
+    } else {
+        return Result::INVALID_ARGUMENTS;
+    }
+}
+
+Return<void> EqualizerEffect::getBandLevel(uint16_t band, getBandLevel_cb _hidl_cb) {
+    if (band < kNumBands) {
+        _hidl_cb(Result::OK, mProperties.bandLevels[band]);
+    } else {
+        _hidl_cb(Result::INVALID_ARGUMENTS, 0);
+    }
+    return Void();
+}
+
+Return<void> EqualizerEffect::getBandCenterFrequency(uint16_t band,
+                                                     getBandCenterFrequency_cb _hidl_cb) {
+    (void)band;
+    _hidl_cb(Result::OK, 0);
+    return Void();
+}
+
+Return<void> EqualizerEffect::getBandFrequencyRange(uint16_t band,
+                                                    getBandFrequencyRange_cb _hidl_cb) {
+    (void)band;
+    _hidl_cb(Result::OK, 0, 1);
+    return Void();
+}
+
+Return<void> EqualizerEffect::getBandForFrequency(uint32_t freq, getBandForFrequency_cb _hidl_cb) {
+    (void)freq;
+    _hidl_cb(Result::OK, 0);
+    return Void();
+}
+
+Return<void> EqualizerEffect::getPresetNames(getPresetNames_cb _hidl_cb) {
+    hidl_vec<hidl_string> presetNames;
+    presetNames.resize(kNumPresets);
+    presetNames[0] = "default";
+    _hidl_cb(Result::OK, presetNames);
+    return Void();
+}
+
+Return<Result> EqualizerEffect::setCurrentPreset(uint16_t preset) {
+    if (preset < kNumPresets) {
+        mProperties.curPreset = preset;
+        return Result::OK;
+    } else {
+        return Result::INVALID_ARGUMENTS;
+    }
+}
+
+Return<void> EqualizerEffect::getCurrentPreset(getCurrentPreset_cb _hidl_cb) {
+    _hidl_cb(Result::OK, mProperties.curPreset);
+    return Void();
+}
+
+Return<Result> EqualizerEffect::setAllProperties(
+        const IEqualizerEffect::AllProperties& properties) {
+    mProperties = properties;
+    return Result::OK;
+}
+
+Return<void> EqualizerEffect::getAllProperties(getAllProperties_cb _hidl_cb) {
+    _hidl_cb(Result::OK, mProperties);
+    return Void();
+}
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/EqualizerEffect.h b/audio/common/7.0/example/EqualizerEffect.h
new file mode 100644
index 0000000..11853c3
--- /dev/null
+++ b/audio/common/7.0/example/EqualizerEffect.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android/hardware/audio/effect/7.0/IEqualizerEffect.h>
+
+#include "Effect.h"
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+class EqualizerEffect : public IEqualizerEffect {
+  public:
+    static const EffectDescriptor& getDescriptor();
+
+    EqualizerEffect();
+
+    // Methods from IEffect interface.
+    ::android::hardware::Return<Result> init() override { return mEffect->init(); }
+    ::android::hardware::Return<Result> setConfig(
+            const EffectConfig& config,
+            const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+            const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) override {
+        return mEffect->setConfig(config, inputBufferProvider, outputBufferProvider);
+    }
+    ::android::hardware::Return<Result> reset() override { return mEffect->reset(); }
+    ::android::hardware::Return<Result> enable() override { return mEffect->enable(); }
+    ::android::hardware::Return<Result> disable() override { return mEffect->disable(); }
+    ::android::hardware::Return<Result> setDevice(
+            const ::android::hardware::audio::common::V7_0::DeviceAddress& device) override {
+        return mEffect->setDevice(device);
+    }
+    ::android::hardware::Return<void> setAndGetVolume(
+            const ::android::hardware::hidl_vec<uint32_t>& volumes,
+            setAndGetVolume_cb _hidl_cb) override {
+        return mEffect->setAndGetVolume(volumes, _hidl_cb);
+    }
+    ::android::hardware::Return<Result> volumeChangeNotification(
+            const ::android::hardware::hidl_vec<uint32_t>& volumes) override {
+        return mEffect->volumeChangeNotification(volumes);
+    }
+    ::android::hardware::Return<Result> setAudioMode(
+            ::android::hardware::audio::common::V7_0::AudioMode mode) override {
+        return mEffect->setAudioMode(mode);
+    }
+    ::android::hardware::Return<Result> setConfigReverse(
+            const EffectConfig& config,
+            const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+            const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) override {
+        return mEffect->setConfigReverse(config, inputBufferProvider, outputBufferProvider);
+    }
+    ::android::hardware::Return<Result> setInputDevice(
+            const ::android::hardware::audio::common::V7_0::DeviceAddress& device) override {
+        return mEffect->setInputDevice(device);
+    }
+    ::android::hardware::Return<void> getConfig(getConfig_cb _hidl_cb) override {
+        return mEffect->getConfig(_hidl_cb);
+    }
+    ::android::hardware::Return<void> getConfigReverse(getConfigReverse_cb _hidl_cb) override {
+        return mEffect->getConfigReverse(_hidl_cb);
+    }
+    ::android::hardware::Return<void> getSupportedAuxChannelsConfigs(
+            uint32_t maxConfigs, getSupportedAuxChannelsConfigs_cb _hidl_cb) override {
+        return mEffect->getSupportedAuxChannelsConfigs(maxConfigs, _hidl_cb);
+    }
+    ::android::hardware::Return<void> getAuxChannelsConfig(
+            getAuxChannelsConfig_cb _hidl_cb) override {
+        return mEffect->getAuxChannelsConfig(_hidl_cb);
+    }
+    ::android::hardware::Return<Result> setAuxChannelsConfig(
+            const EffectAuxChannelsConfig& config) override {
+        return mEffect->setAuxChannelsConfig(config);
+    }
+    ::android::hardware::Return<Result> setAudioSource(
+            const ::android::hardware::hidl_string& source) override {
+        return mEffect->setAudioSource(source);
+    }
+    ::android::hardware::Return<Result> offload(const EffectOffloadParameter& param) override {
+        return mEffect->offload(param);
+    }
+    ::android::hardware::Return<void> getDescriptor(getDescriptor_cb _hidl_cb) override {
+        return mEffect->getDescriptor(_hidl_cb);
+    }
+    ::android::hardware::Return<void> prepareForProcessing(
+            prepareForProcessing_cb _hidl_cb) override {
+        return mEffect->prepareForProcessing(_hidl_cb);
+    }
+    ::android::hardware::Return<Result> setProcessBuffers(const AudioBuffer& inBuffer,
+                                                          const AudioBuffer& outBuffer) override {
+        return mEffect->setProcessBuffers(inBuffer, outBuffer);
+    }
+    ::android::hardware::Return<void> command(uint32_t commandId,
+                                              const ::android::hardware::hidl_vec<uint8_t>& data,
+                                              uint32_t resultMaxSize,
+                                              command_cb _hidl_cb) override {
+        return mEffect->command(commandId, data, resultMaxSize, _hidl_cb);
+    }
+    ::android::hardware::Return<Result> setParameter(
+            const ::android::hardware::hidl_vec<uint8_t>& parameter,
+            const ::android::hardware::hidl_vec<uint8_t>& value) override {
+        return mEffect->setParameter(parameter, value);
+    }
+    ::android::hardware::Return<void> getParameter(
+            const ::android::hardware::hidl_vec<uint8_t>& parameter, uint32_t valueMaxSize,
+            getParameter_cb _hidl_cb) override {
+        return mEffect->getParameter(parameter, valueMaxSize, _hidl_cb);
+    }
+    ::android::hardware::Return<void> getSupportedConfigsForFeature(
+            uint32_t featureId, uint32_t maxConfigs, uint32_t configSize,
+            getSupportedConfigsForFeature_cb _hidl_cb) override {
+        return mEffect->getSupportedConfigsForFeature(featureId, maxConfigs, configSize, _hidl_cb);
+    }
+    ::android::hardware::Return<void> getCurrentConfigForFeature(
+            uint32_t featureId, uint32_t configSize,
+            getCurrentConfigForFeature_cb _hidl_cb) override {
+        return mEffect->getCurrentConfigForFeature(featureId, configSize, _hidl_cb);
+    }
+    ::android::hardware::Return<Result> setCurrentConfigForFeature(
+            uint32_t featureId, const ::android::hardware::hidl_vec<uint8_t>& configData) override {
+        return mEffect->setCurrentConfigForFeature(featureId, configData);
+    }
+    ::android::hardware::Return<Result> close() override { return mEffect->close(); }
+
+    // Methods from IEqualizerEffect interface.
+    ::android::hardware::Return<void> getNumBands(getNumBands_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getLevelRange(getLevelRange_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> setBandLevel(uint16_t band, int16_t level) override;
+    ::android::hardware::Return<void> getBandLevel(uint16_t band,
+                                                   getBandLevel_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getBandCenterFrequency(
+            uint16_t band, getBandCenterFrequency_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getBandFrequencyRange(
+            uint16_t band, getBandFrequencyRange_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getBandForFrequency(uint32_t freq,
+                                                          getBandForFrequency_cb _hidl_cb) override;
+    ::android::hardware::Return<void> getPresetNames(getPresetNames_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> setCurrentPreset(uint16_t preset) override;
+    ::android::hardware::Return<void> getCurrentPreset(getCurrentPreset_cb _hidl_cb) override;
+    ::android::hardware::Return<Result> setAllProperties(
+            const IEqualizerEffect::AllProperties& properties) override;
+    ::android::hardware::Return<void> getAllProperties(getAllProperties_cb _hidl_cb) override;
+
+  private:
+    static constexpr size_t kNumBands = 1;
+    static constexpr size_t kNumPresets = 1;
+    sp<Effect> mEffect;
+    IEqualizerEffect::AllProperties mProperties{};
+};
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/LoudnessEnhancerEffect.cpp b/audio/common/7.0/example/LoudnessEnhancerEffect.cpp
new file mode 100644
index 0000000..38269b3
--- /dev/null
+++ b/audio/common/7.0/example/LoudnessEnhancerEffect.cpp
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "EffectsFactory7.0"
+#include <log/log.h>
+
+#include "LoudnessEnhancerEffect.h"
+
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using namespace ::android::hardware::audio::common::V7_0;
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+const EffectDescriptor& LoudnessEnhancerEffect::getDescriptor() {
+    // Note: for VTS tests only 'type' and 'uuid' fields are required.
+    // The actual implementation must provide meaningful values
+    // for all fields of the descriptor.
+    static const EffectDescriptor descriptor = {
+            .type =
+                    {// Same UUID as AudioEffect.EFFECT_TYPE_LOUDNESS_ENHANCER in Java.
+                     0xfe3199be, 0xaed0, 0x413f, 0x87bb,
+                     std::array<uint8_t, 6>{{0x11, 0x26, 0x0e, 0xb6, 0x3c, 0xf1}}},
+            .uuid = {0, 0, 0, 2, std::array<uint8_t, 6>{{0, 0, 0, 0, 0, 0}}}};
+    return descriptor;
+}  // namespace android::hardware::audio::effect::V7_0::implementation
+
+LoudnessEnhancerEffect::LoudnessEnhancerEffect() : mEffect(new Effect(getDescriptor())) {}
+
+Return<Result> LoudnessEnhancerEffect::setTargetGain(int32_t targetGainMb) {
+    mTargetGainMb = targetGainMb;
+    return Result::OK;
+}
+
+Return<void> LoudnessEnhancerEffect::getTargetGain(getTargetGain_cb _hidl_cb) {
+    _hidl_cb(Result::OK, mTargetGainMb);
+    return Void();
+}
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/LoudnessEnhancerEffect.h b/audio/common/7.0/example/LoudnessEnhancerEffect.h
new file mode 100644
index 0000000..1af0d9f
--- /dev/null
+++ b/audio/common/7.0/example/LoudnessEnhancerEffect.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android/hardware/audio/effect/7.0/ILoudnessEnhancerEffect.h>
+
+#include "Effect.h"
+
+namespace android::hardware::audio::effect::V7_0::implementation {
+
+class LoudnessEnhancerEffect : public ILoudnessEnhancerEffect {
+  public:
+    static const EffectDescriptor& getDescriptor();
+
+    LoudnessEnhancerEffect();
+
+    // Methods from IEffect interface.
+    ::android::hardware::Return<Result> init() override { return mEffect->init(); }
+    ::android::hardware::Return<Result> setConfig(
+            const EffectConfig& config,
+            const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+            const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) override {
+        return mEffect->setConfig(config, inputBufferProvider, outputBufferProvider);
+    }
+    ::android::hardware::Return<Result> reset() override { return mEffect->reset(); }
+    ::android::hardware::Return<Result> enable() override { return mEffect->enable(); }
+    ::android::hardware::Return<Result> disable() override { return mEffect->disable(); }
+    ::android::hardware::Return<Result> setDevice(
+            const ::android::hardware::audio::common::V7_0::DeviceAddress& device) override {
+        return mEffect->setDevice(device);
+    }
+    ::android::hardware::Return<void> setAndGetVolume(
+            const ::android::hardware::hidl_vec<uint32_t>& volumes,
+            setAndGetVolume_cb _hidl_cb) override {
+        return mEffect->setAndGetVolume(volumes, _hidl_cb);
+    }
+    ::android::hardware::Return<Result> volumeChangeNotification(
+            const ::android::hardware::hidl_vec<uint32_t>& volumes) override {
+        return mEffect->volumeChangeNotification(volumes);
+    }
+    ::android::hardware::Return<Result> setAudioMode(
+            ::android::hardware::audio::common::V7_0::AudioMode mode) override {
+        return mEffect->setAudioMode(mode);
+    }
+    ::android::hardware::Return<Result> setConfigReverse(
+            const EffectConfig& config,
+            const ::android::sp<IEffectBufferProviderCallback>& inputBufferProvider,
+            const ::android::sp<IEffectBufferProviderCallback>& outputBufferProvider) override {
+        return mEffect->setConfigReverse(config, inputBufferProvider, outputBufferProvider);
+    }
+    ::android::hardware::Return<Result> setInputDevice(
+            const ::android::hardware::audio::common::V7_0::DeviceAddress& device) override {
+        return mEffect->setInputDevice(device);
+    }
+    ::android::hardware::Return<void> getConfig(getConfig_cb _hidl_cb) override {
+        return mEffect->getConfig(_hidl_cb);
+    }
+    ::android::hardware::Return<void> getConfigReverse(getConfigReverse_cb _hidl_cb) override {
+        return mEffect->getConfigReverse(_hidl_cb);
+    }
+    ::android::hardware::Return<void> getSupportedAuxChannelsConfigs(
+            uint32_t maxConfigs, getSupportedAuxChannelsConfigs_cb _hidl_cb) override {
+        return mEffect->getSupportedAuxChannelsConfigs(maxConfigs, _hidl_cb);
+    }
+    ::android::hardware::Return<void> getAuxChannelsConfig(
+            getAuxChannelsConfig_cb _hidl_cb) override {
+        return mEffect->getAuxChannelsConfig(_hidl_cb);
+    }
+    ::android::hardware::Return<Result> setAuxChannelsConfig(
+            const EffectAuxChannelsConfig& config) override {
+        return mEffect->setAuxChannelsConfig(config);
+    }
+    ::android::hardware::Return<Result> setAudioSource(
+            const ::android::hardware::hidl_string& source) override {
+        return mEffect->setAudioSource(source);
+    }
+    ::android::hardware::Return<Result> offload(const EffectOffloadParameter& param) override {
+        return mEffect->offload(param);
+    }
+    ::android::hardware::Return<void> getDescriptor(getDescriptor_cb _hidl_cb) override {
+        return mEffect->getDescriptor(_hidl_cb);
+    }
+    ::android::hardware::Return<void> prepareForProcessing(
+            prepareForProcessing_cb _hidl_cb) override {
+        return mEffect->prepareForProcessing(_hidl_cb);
+    }
+    ::android::hardware::Return<Result> setProcessBuffers(const AudioBuffer& inBuffer,
+                                                          const AudioBuffer& outBuffer) override {
+        return mEffect->setProcessBuffers(inBuffer, outBuffer);
+    }
+    ::android::hardware::Return<void> command(uint32_t commandId,
+                                              const ::android::hardware::hidl_vec<uint8_t>& data,
+                                              uint32_t resultMaxSize,
+                                              command_cb _hidl_cb) override {
+        return mEffect->command(commandId, data, resultMaxSize, _hidl_cb);
+    }
+    ::android::hardware::Return<Result> setParameter(
+            const ::android::hardware::hidl_vec<uint8_t>& parameter,
+            const ::android::hardware::hidl_vec<uint8_t>& value) override {
+        return mEffect->setParameter(parameter, value);
+    }
+    ::android::hardware::Return<void> getParameter(
+            const ::android::hardware::hidl_vec<uint8_t>& parameter, uint32_t valueMaxSize,
+            getParameter_cb _hidl_cb) override {
+        return mEffect->getParameter(parameter, valueMaxSize, _hidl_cb);
+    }
+    ::android::hardware::Return<void> getSupportedConfigsForFeature(
+            uint32_t featureId, uint32_t maxConfigs, uint32_t configSize,
+            getSupportedConfigsForFeature_cb _hidl_cb) override {
+        return mEffect->getSupportedConfigsForFeature(featureId, maxConfigs, configSize, _hidl_cb);
+    }
+    ::android::hardware::Return<void> getCurrentConfigForFeature(
+            uint32_t featureId, uint32_t configSize,
+            getCurrentConfigForFeature_cb _hidl_cb) override {
+        return mEffect->getCurrentConfigForFeature(featureId, configSize, _hidl_cb);
+    }
+    ::android::hardware::Return<Result> setCurrentConfigForFeature(
+            uint32_t featureId, const ::android::hardware::hidl_vec<uint8_t>& configData) override {
+        return mEffect->setCurrentConfigForFeature(featureId, configData);
+    }
+    ::android::hardware::Return<Result> close() override { return mEffect->close(); }
+
+    // Methods from ILoudnessEnhancerEffect interface.
+    ::android::hardware::Return<Result> setTargetGain(int32_t targetGainMb) override;
+    ::android::hardware::Return<void> getTargetGain(getTargetGain_cb _hidl_cb) override;
+
+  private:
+    sp<Effect> mEffect;
+    int32_t mTargetGainMb = 0;
+};
+
+}  // namespace android::hardware::audio::effect::V7_0::implementation
diff --git a/audio/common/7.0/example/android.hardware.audio@7.0-service.example.rc b/audio/common/7.0/example/android.hardware.audio@7.0-service.example.rc
new file mode 100644
index 0000000..cf8b51f
--- /dev/null
+++ b/audio/common/7.0/example/android.hardware.audio@7.0-service.example.rc
@@ -0,0 +1,7 @@
+service vendor.audio-hal-7-0 /vendor/bin/hw/android.hardware.audio@7.0-service.example
+    class hal
+    user audioserver
+    group audio
+    capabilities BLOCK_SUSPEND
+    ioprio rt 4
+    task_profiles ProcessCapacityHigh HighPerformance
diff --git a/audio/common/7.0/example/android.hardware.audio@7.0-service.example.xml b/audio/common/7.0/example/android.hardware.audio@7.0-service.example.xml
new file mode 100644
index 0000000..b91b061
--- /dev/null
+++ b/audio/common/7.0/example/android.hardware.audio@7.0-service.example.xml
@@ -0,0 +1,20 @@
+<manifest version="1.0" type="device">
+    <hal format="hidl">
+        <name>android.hardware.audio</name>
+        <transport>hwbinder</transport>
+        <version>7.0</version>
+        <interface>
+            <name>IDevicesFactory</name>
+            <instance>example</instance>
+        </interface>
+    </hal>
+    <hal format="hidl">
+        <name>android.hardware.audio.effect</name>
+        <transport>hwbinder</transport>
+        <version>7.0</version>
+        <interface>
+            <name>IEffectsFactory</name>
+            <instance>example</instance>
+        </interface>
+    </hal>
+</manifest>
diff --git a/audio/common/7.0/example/service.cpp b/audio/common/7.0/example/service.cpp
new file mode 100644
index 0000000..641e2c9
--- /dev/null
+++ b/audio/common/7.0/example/service.cpp
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.audio@7.0-service.example"
+#include <hidl/HidlTransportSupport.h>
+#include <log/log.h>
+
+#include "DevicesFactory.h"
+#include "EffectsFactory.h"
+
+using android::hardware::configureRpcThreadpool;
+using android::hardware::joinRpcThreadpool;
+using namespace android;
+
+status_t registerDevicesFactoryService() {
+    sp<::android::hardware::audio::V7_0::IDevicesFactory> devicesFactory =
+            new ::android::hardware::audio::V7_0::implementation::DevicesFactory();
+    status_t status = devicesFactory->registerAsService("example");
+    ALOGE_IF(status != OK, "Error registering devices factory as service: %d", status);
+    return status;
+}
+
+status_t registerEffectsFactoryService() {
+    sp<::android::hardware::audio::effect::V7_0::IEffectsFactory> devicesFactory =
+            new ::android::hardware::audio::effect::V7_0::implementation::EffectsFactory();
+    status_t status = devicesFactory->registerAsService("example");
+    ALOGE_IF(status != OK, "Error registering effects factory as service: %d", status);
+    return status;
+}
+
+int main() {
+    configureRpcThreadpool(1, true);
+    status_t status = registerDevicesFactoryService();
+    if (status != OK) {
+        return status;
+    }
+    status = registerEffectsFactoryService();
+    if (status != OK) {
+        return status;
+    }
+    joinRpcThreadpool();
+
+    return 1;
+}
diff --git a/audio/common/7.0/types.hal b/audio/common/7.0/types.hal
index 2288eb1..0d0fa7e 100644
--- a/audio/common/7.0/types.hal
+++ b/audio/common/7.0/types.hal
@@ -18,34 +18,18 @@
 
 import android.hidl.safe_union@1.0;
 
-/*
- *
- *  IDs and Handles
- *
- */
-
 /**
- * Handle type for identifying audio sources and sinks.
+ * Handle type for identifying audio resources. Handles are allocated by the framework.
  */
 typedef int32_t AudioIoHandle;
 
 /**
- * Audio hw module handle functions or structures referencing a module.
- */
-typedef int32_t AudioModuleHandle;
-
-/**
  * Each port has a unique ID or handle allocated by policy manager.
  */
 typedef int32_t AudioPortHandle;
 
 /**
- * Each patch is identified by a handle at the interface used to create that
- * patch. For instance, when a patch is created by the audio HAL, the HAL
- * allocates and returns a handle.  This handle is unique to a given audio HAL
- * hardware module.  But the same patch receives another system wide unique
- * handle allocated by the framework.  This unique handle is used for all
- * transactions inside the framework.
+ * Each patch is identified by a handle allocated by the HAL.
  */
 typedef int32_t AudioPatchHandle;
 
@@ -55,17 +39,6 @@
 typedef uint32_t AudioHwSync;
 
 /**
- * Each port has a unique ID or handle allocated by policy manager.
- */
-@export(name="")
-enum AudioHandleConsts : int32_t {
-    AUDIO_IO_HANDLE_NONE = 0,
-    AUDIO_MODULE_HANDLE_NONE = 0,
-    AUDIO_PORT_HANDLE_NONE = 0,
-    AUDIO_PATCH_HANDLE_NONE = 0,
-};
-
-/**
  * Commonly used structure for passing unique identifieds (UUID).
  * For the definition of UUID, refer to ITU-T X.667 spec.
  */
@@ -86,116 +59,25 @@
 
 /**
  * Audio stream type describing the intended use case of a stream.
+ * See 'audioStreamType' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-@export(name="audio_stream_type_t", value_prefix="AUDIO_STREAM_")
-enum AudioStreamType : int32_t {
-    // These values must kept in sync with
-    //  frameworks/base/media/java/android/media/AudioSystem.java
-    /** Used to identify the default audio stream volume. */
-    DEFAULT          = -1,
-    /** Specifies the minimum value for use in checks and loops. */
-    MIN              = 0,
-    /** Used to identify the volume of audio streams for phone calls. */
-    VOICE_CALL       = 0,
-    /** Used to identify the volume of audio streams for system sounds. */
-    SYSTEM           = 1,
-    /**
-     * Used to identify the volume of audio streams for the phone ring
-     * and message alerts.
-     */
-    RING             = 2,
-    /** Used to identify the volume of audio streams for music playback. */
-    MUSIC            = 3,
-    /** Used to identify the volume of audio streams for alarms. */
-    ALARM            = 4,
-    /** Used to identify the volume of audio streams for notifications. */
-    NOTIFICATION     = 5,
-    /**
-     * Used to identify the volume of audio streams for phone calls
-     * when connected on bluetooth.
-     */
-    BLUETOOTH_SCO    = 6,
-    /**
-     * Used to identify the volume of audio streams for enforced system
-     * sounds in certain countries (e.g camera in Japan). */
-    ENFORCED_AUDIBLE = 7,
-    /** Used to identify the volume of audio streams for DTMF tones. */
-    DTMF             = 8,
-    /**
-     * Used to identify the volume of audio streams exclusively transmitted
-     * through the speaker (TTS) of the device.
-     */
-    TTS              = 9,
-    /**
-     * Used to identify the volume of audio streams for accessibility prompts.
-     */
-    ACCESSIBILITY    = 10,
-    /** Used to identify the volume of audio streams for virtual assistant. */
-    ASSISTANT        = 11,
-};
+typedef string AudioStreamType;
 
-@export(name="audio_source_t", value_prefix="AUDIO_SOURCE_")
-enum AudioSource : int32_t {
-    // These values must kept in sync with
-    //  frameworks/base/media/java/android/media/MediaRecorder.java,
-    //  system/media/audio_effects/include/audio_effects/audio_effects_conf.h
-    /** Default audio source. */
-    DEFAULT             = 0,
-    /** Microphone audio source. */
-    MIC                 = 1,
-    /** Voice call uplink (Tx) audio source. */
-    VOICE_UPLINK        = 2,
-    /** Voice call downlink (Rx) audio source. */
-    VOICE_DOWNLINK      = 3,
-    /** Voice call uplink + downlink audio source. */
-    VOICE_CALL          = 4,
-    /**
-     * Microphone audio source tuned for video recording, with the same
-     * orientation as the camera if available.
-     */
-    CAMCORDER           = 5,
-    /** Microphone audio source tuned for voice recognition. */
-    VOICE_RECOGNITION   = 6,
-    /**
-     * Microphone audio source tuned for voice communications such as VoIP. It
-     * will for instance take advantage of echo cancellation or automatic gain
-     * control if available.
-     */
-    VOICE_COMMUNICATION = 7,
-    /**
-     * Source for the mix to be presented remotely. An example of remote
-     * presentation is Wifi Display where a dongle attached to a TV can be used
-     * to play the mix captured by this audio source.
-     */
-    REMOTE_SUBMIX       = 8,
-    /**
-     * Source for unprocessed sound. Usage examples include level measurement
-     * and raw signal analysis.
-     */
-    UNPROCESSED         = 9,
-    /**
-     * Source for capturing audio meant to be processed in real time and played back for live
-     * performance (e.g karaoke). The capture path will minimize latency and coupling with
-     * playback path.
-     */
-    VOICE_PERFORMANCE    = 10,
-    /**
-     * Source for an echo canceller to capture the reference signal to be cancelled.
-     * The echo reference signal will be captured as close as possible to the DAC in order
-     * to include all post processing applied to the playback path.
-     */
-    ECHO_REFERENCE      = 1997,
-    /** Virtual source for the built-in FM tuner. */
-    FM_TUNER            = 1998,
-    /** Virtual source for the last captured hotword. */
-    HOTWORD             = 1999,
-};
-
-typedef int32_t AudioSession;
 /**
- * Special audio session values.
+ * An audio source defines the intended use case for the sound being recorded.
+ * See 'audioSource' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-@export(name="audio_session_t", value_prefix="AUDIO_SESSION_")
+typedef string AudioSource;
+
+/**
+ * An audio session identifier is used to designate the particular
+ * playback or recording session (e.g. playback performed by a certain
+ * application).
+ */
+typedef int32_t AudioSession;
+
 enum AudioSessionConsts : int32_t {
     /**
      * Session for effects attached to a particular sink or source audio device
@@ -213,382 +95,42 @@
      * (value must be 0)
      */
     OUTPUT_MIX = 0,
-    /**
-     * Application does not specify an explicit session ID to be used, and
-     * requests a new session ID to be allocated. Corresponds to
-     * AudioManager.AUDIO_SESSION_ID_GENERATE and
-     * AudioSystem.AUDIO_SESSION_ALLOCATE.
-     */
-    ALLOCATE = 0,
-    /**
-     * For use with AudioRecord::start(), this indicates no trigger session.
-     * It is also used with output tracks and patch tracks, which never have a
-     * session.
-     */
-    NONE = 0
 };
 
 /**
- * Audio format  is a 32-bit word that consists of:
- *   main format field (upper 8 bits)
- *   sub format field (lower 24 bits).
- *
- * The main format indicates the main codec type. The sub format field indicates
- * options and parameters for each format. The sub format is mainly used for
- * record to indicate for instance the requested bitrate or profile.  It can
- * also be used for certain formats to give informations not present in the
- * encoded audio stream (e.g. octet alignement for AMR).
+ * Audio format indicates audio codec type.
+ * See 'audioFormat' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-@export(name="audio_format_t", value_prefix="AUDIO_FORMAT_")
-enum AudioFormat : uint32_t {
-    INVALID             = 0xFFFFFFFFUL,
-    DEFAULT             = 0,
-    PCM                 = 0x00000000UL,
-    MP3                 = 0x01000000UL,
-    AMR_NB              = 0x02000000UL,
-    AMR_WB              = 0x03000000UL,
-    AAC                 = 0x04000000UL,
-    /** Deprecated, Use AAC_HE_V1 */
-    HE_AAC_V1           = 0x05000000UL,
-    /** Deprecated, Use AAC_HE_V2 */
-    HE_AAC_V2           = 0x06000000UL,
-    VORBIS              = 0x07000000UL,
-    OPUS                = 0x08000000UL,
-    AC3                 = 0x09000000UL,
-    E_AC3               = 0x0A000000UL,
-    DTS                 = 0x0B000000UL,
-    DTS_HD              = 0x0C000000UL,
-    /** IEC61937 is encoded audio wrapped in 16-bit PCM. */
-    IEC61937            = 0x0D000000UL,
-    DOLBY_TRUEHD        = 0x0E000000UL,
-    EVRC                = 0x10000000UL,
-    EVRCB               = 0x11000000UL,
-    EVRCWB              = 0x12000000UL,
-    EVRCNW              = 0x13000000UL,
-    AAC_ADIF            = 0x14000000UL,
-    WMA                 = 0x15000000UL,
-    WMA_PRO             = 0x16000000UL,
-    AMR_WB_PLUS         = 0x17000000UL,
-    MP2                 = 0x18000000UL,
-    QCELP               = 0x19000000UL,
-    DSD                 = 0x1A000000UL,
-    FLAC                = 0x1B000000UL,
-    ALAC                = 0x1C000000UL,
-    APE                 = 0x1D000000UL,
-    AAC_ADTS            = 0x1E000000UL,
-    SBC                 = 0x1F000000UL,
-    APTX                = 0x20000000UL,
-    APTX_HD             = 0x21000000UL,
-    AC4                 = 0x22000000UL,
-    LDAC                = 0x23000000UL,
-    /** Dolby Metadata-enhanced Audio Transmission */
-    MAT                 = 0x24000000UL,
-    AAC_LATM            = 0x25000000UL,
-    CELT                = 0x26000000UL,
-    APTX_ADAPTIVE       = 0x27000000UL,
-    LHDC                = 0x28000000UL,
-    LHDC_LL             = 0x29000000UL,
-    APTX_TWSP           = 0x2A000000UL,
+typedef string AudioFormat;
 
-    /** Deprecated */
-    MAIN_MASK           = 0xFF000000UL,
-    SUB_MASK            = 0x00FFFFFFUL,
+/**
+ * Audio channel mask indicates presence of particular channels.
+ * Note that every value is already a mask comprised of individual
+ * channels.
+ * See 'audioChannelMask' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioChannelMask;
 
-    /* Subformats */
-    PCM_SUB_16_BIT        = 0x1, // PCM signed 16 bits
-    PCM_SUB_8_BIT         = 0x2, // PCM unsigned 8 bits
-    PCM_SUB_32_BIT        = 0x3, // PCM signed .31 fixed point
-    PCM_SUB_8_24_BIT      = 0x4, // PCM signed 8.23 fixed point
-    PCM_SUB_FLOAT         = 0x5, // PCM single-precision float pt
-    PCM_SUB_24_BIT_PACKED = 0x6, // PCM signed .23 fix pt (3 bytes)
-
-    MP3_SUB_NONE          = 0x0,
-
-    AMR_SUB_NONE          = 0x0,
-
-    AAC_SUB_MAIN          = 0x1,
-    AAC_SUB_LC            = 0x2,
-    AAC_SUB_SSR           = 0x4,
-    AAC_SUB_LTP           = 0x8,
-    AAC_SUB_HE_V1         = 0x10,
-    AAC_SUB_SCALABLE      = 0x20,
-    AAC_SUB_ERLC          = 0x40,
-    AAC_SUB_LD            = 0x80,
-    AAC_SUB_HE_V2         = 0x100,
-    AAC_SUB_ELD           = 0x200,
-    AAC_SUB_XHE           = 0x300,
-
-    VORBIS_SUB_NONE       = 0x0,
-
-    E_AC3_SUB_JOC         = 0x1,
-
-    MAT_SUB_1_0           = 0x1,
-    MAT_SUB_2_0           = 0x2,
-    MAT_SUB_2_1           = 0x3,
-
-    /* Aliases */
-    /** note != AudioFormat.ENCODING_PCM_16BIT */
-    PCM_16_BIT          = (PCM | PCM_SUB_16_BIT),
-    /** note != AudioFormat.ENCODING_PCM_8BIT */
-    PCM_8_BIT           = (PCM | PCM_SUB_8_BIT),
-    PCM_32_BIT          = (PCM | PCM_SUB_32_BIT),
-    PCM_8_24_BIT        = (PCM | PCM_SUB_8_24_BIT),
-    PCM_FLOAT           = (PCM | PCM_SUB_FLOAT),
-    PCM_24_BIT_PACKED   = (PCM | PCM_SUB_24_BIT_PACKED),
-    AAC_MAIN            = (AAC | AAC_SUB_MAIN),
-    AAC_LC              = (AAC | AAC_SUB_LC),
-    AAC_SSR             = (AAC | AAC_SUB_SSR),
-    AAC_LTP             = (AAC | AAC_SUB_LTP),
-    AAC_HE_V1           = (AAC | AAC_SUB_HE_V1),
-    AAC_SCALABLE        = (AAC | AAC_SUB_SCALABLE),
-    AAC_ERLC            = (AAC | AAC_SUB_ERLC),
-    AAC_LD              = (AAC | AAC_SUB_LD),
-    AAC_HE_V2           = (AAC | AAC_SUB_HE_V2),
-    AAC_ELD             = (AAC | AAC_SUB_ELD),
-    AAC_XHE             = (AAC | AAC_SUB_XHE),
-    AAC_ADTS_MAIN       = (AAC_ADTS | AAC_SUB_MAIN),
-    AAC_ADTS_LC         = (AAC_ADTS | AAC_SUB_LC),
-    AAC_ADTS_SSR        = (AAC_ADTS | AAC_SUB_SSR),
-    AAC_ADTS_LTP        = (AAC_ADTS | AAC_SUB_LTP),
-    AAC_ADTS_HE_V1      = (AAC_ADTS | AAC_SUB_HE_V1),
-    AAC_ADTS_SCALABLE   = (AAC_ADTS | AAC_SUB_SCALABLE),
-    AAC_ADTS_ERLC       = (AAC_ADTS | AAC_SUB_ERLC),
-    AAC_ADTS_LD         = (AAC_ADTS | AAC_SUB_LD),
-    AAC_ADTS_HE_V2      = (AAC_ADTS | AAC_SUB_HE_V2),
-    AAC_ADTS_ELD        = (AAC_ADTS | AAC_SUB_ELD),
-    AAC_ADTS_XHE        = (AAC_ADTS | AAC_SUB_XHE),
-    E_AC3_JOC           = (E_AC3 | E_AC3_SUB_JOC),
-    MAT_1_0             = (MAT | MAT_SUB_1_0),
-    MAT_2_0             = (MAT | MAT_SUB_2_0),
-    MAT_2_1             = (MAT | MAT_SUB_2_1),
-    AAC_LATM_LC         = (AAC_LATM | AAC_SUB_LC),
-    AAC_LATM_HE_V1      = (AAC_LATM | AAC_SUB_HE_V1),
-    AAC_LATM_HE_V2      = (AAC_LATM | AAC_SUB_HE_V2),
+/**
+ * Base configuration attributes applicable to any stream of audio.
+ */
+struct AudioConfigBase {
+    AudioFormat format;                 // 'DEFAULT' means 'unspecified'
+    uint32_t sampleRateHz;              // 0 means 'unspecified'
+    vec<AudioChannelMask> channelMask;  // empty means 'unspecified'
 };
 
 /**
- * Usage of these values highlights places in the code that use 2- or 8- channel
- * assumptions.
+ * Configurations supported for a certain audio format.
  */
-@export(name="")
-enum FixedChannelCount : int32_t {
-    FCC_2 = 2, // This is typically due to legacy implementation of stereo I/O
-    FCC_8 = 8  // This is typically due to audio mixer and resampler limitations
-};
-
-/**
- * A channel mask per se only defines the presence or absence of a channel, not
- * the order.
- *
- * The channel order convention is that channels are interleaved in order from
- * least significant channel mask bit to most significant channel mask bit,
- * with unused bits skipped. For example for stereo, LEFT would be first,
- * followed by RIGHT.
- * Any exceptions to this convention are noted at the appropriate API.
- *
- * AudioChannelMask is an opaque type and its internal layout should not be
- * assumed as it may change in the future.  Instead, always use functions
- * to examine it.
- *
- * These are the current representations:
- *
- *   REPRESENTATION_POSITION
- *     is a channel mask representation for position assignment.  Each low-order
- *     bit corresponds to the spatial position of a transducer (output), or
- *     interpretation of channel (input).  The user of a channel mask needs to
- *     know the context of whether it is for output or input.  The constants
- *     OUT_* or IN_* apply to the bits portion.  It is not permitted for no bits
- *     to be set.
- *
- *   REPRESENTATION_INDEX
- *     is a channel mask representation for index assignment.  Each low-order
- *     bit corresponds to a selected channel.  There is no platform
- *     interpretation of the various bits.  There is no concept of output or
- *     input.  It is not permitted for no bits to be set.
- *
- * All other representations are reserved for future use.
- *
- * Warning: current representation distinguishes between input and output, but
- * this will not the be case in future revisions of the platform. Wherever there
- * is an ambiguity between input and output that is currently resolved by
- * checking the channel mask, the implementer should look for ways to fix it
- * with additional information outside of the mask.
- */
-@export(name="", value_prefix="AUDIO_CHANNEL_")
-enum AudioChannelMask : uint32_t {
-    /** must be 0 for compatibility */
-    REPRESENTATION_POSITION = 0,
-    /** 1 is reserved for future use */
-    REPRESENTATION_INDEX    = 2,
-    /* 3 is reserved for future use */
-
-    /** These can be a complete value of AudioChannelMask */
-    NONE                      = 0x0,
-    INVALID                   = 0xC0000000,
-
-   /*
-    * These can be the bits portion of an AudioChannelMask
-    * with representation REPRESENTATION_POSITION.
-    */
-
-    /** output channels */
-    OUT_FRONT_LEFT            = 0x1,
-    OUT_FRONT_RIGHT           = 0x2,
-    OUT_FRONT_CENTER          = 0x4,
-    OUT_LOW_FREQUENCY         = 0x8,
-    OUT_BACK_LEFT             = 0x10,
-    OUT_BACK_RIGHT            = 0x20,
-    OUT_FRONT_LEFT_OF_CENTER  = 0x40,
-    OUT_FRONT_RIGHT_OF_CENTER = 0x80,
-    OUT_BACK_CENTER           = 0x100,
-    OUT_SIDE_LEFT             = 0x200,
-    OUT_SIDE_RIGHT            = 0x400,
-    OUT_TOP_CENTER            = 0x800,
-    OUT_TOP_FRONT_LEFT        = 0x1000,
-    OUT_TOP_FRONT_CENTER      = 0x2000,
-    OUT_TOP_FRONT_RIGHT       = 0x4000,
-    OUT_TOP_BACK_LEFT         = 0x8000,
-    OUT_TOP_BACK_CENTER       = 0x10000,
-    OUT_TOP_BACK_RIGHT        = 0x20000,
-    OUT_TOP_SIDE_LEFT         = 0x40000,
-    OUT_TOP_SIDE_RIGHT        = 0x80000,
-
-    /**
-     * Haptic channel characteristics are specific to a device and
-     * only used to play device specific resources (eg: ringtones).
-     * The HAL can freely map A and B to haptic controllers, the
-     * framework shall not interpret those values and forward them
-     * from the device audio assets.
-     */
-    OUT_HAPTIC_A              = 0x20000000,
-    OUT_HAPTIC_B              = 0x10000000,
-
-    OUT_MONO     = OUT_FRONT_LEFT,
-    OUT_STEREO   = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT),
-    OUT_2POINT1  = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT | OUT_LOW_FREQUENCY),
-    OUT_2POINT0POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-                         OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
-    OUT_2POINT1POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-                         OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT |
-                         OUT_LOW_FREQUENCY),
-    OUT_3POINT0POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT | OUT_FRONT_CENTER |
-                         OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
-    OUT_3POINT1POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT | OUT_FRONT_CENTER |
-                        OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT |
-                        OUT_LOW_FREQUENCY),
-    OUT_QUAD     = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_BACK_LEFT | OUT_BACK_RIGHT),
-    OUT_QUAD_BACK = OUT_QUAD,
-    /** like OUT_QUAD_BACK with *_SIDE_* instead of *_BACK_* */
-    OUT_QUAD_SIDE = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
-    OUT_SURROUND = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_FRONT_CENTER | OUT_BACK_CENTER),
-    OUT_PENTA = (OUT_QUAD | OUT_FRONT_CENTER),
-    OUT_5POINT1   = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
-            OUT_BACK_LEFT | OUT_BACK_RIGHT),
-    OUT_5POINT1_BACK = OUT_5POINT1,
-    /** like OUT_5POINT1_BACK with *_SIDE_* instead of *_BACK_* */
-    OUT_5POINT1_SIDE = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
-            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
-    OUT_5POINT1POINT2  = (OUT_5POINT1 | OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
-    OUT_5POINT1POINT4  = (OUT_5POINT1 |
-            OUT_TOP_FRONT_LEFT | OUT_TOP_FRONT_RIGHT |
-            OUT_TOP_BACK_LEFT | OUT_TOP_BACK_RIGHT),
-    OUT_6POINT1 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
-            OUT_BACK_LEFT | OUT_BACK_RIGHT |
-            OUT_BACK_CENTER),
-    /** matches the correct AudioFormat.CHANNEL_OUT_7POINT1_SURROUND */
-    OUT_7POINT1  = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
-            OUT_BACK_LEFT | OUT_BACK_RIGHT |
-            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
-    OUT_7POINT1POINT2  = (OUT_7POINT1 | OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
-    OUT_7POINT1POINT4  = (OUT_7POINT1 |
-            OUT_TOP_FRONT_LEFT | OUT_TOP_FRONT_RIGHT |
-            OUT_TOP_BACK_LEFT | OUT_TOP_BACK_RIGHT),
-    OUT_MONO_HAPTIC_A = (OUT_FRONT_LEFT | OUT_HAPTIC_A),
-    OUT_STEREO_HAPTIC_A = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT | OUT_HAPTIC_A),
-    OUT_HAPTIC_AB = (OUT_HAPTIC_A | OUT_HAPTIC_B),
-    OUT_MONO_HAPTIC_AB = (OUT_FRONT_LEFT | OUT_HAPTIC_A | OUT_HAPTIC_B),
-    OUT_STEREO_HAPTIC_AB = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
-            OUT_HAPTIC_A | OUT_HAPTIC_B),
-    // Note that the 2.0 OUT_ALL* have been moved to helper functions
-
-    /* These are bits only, not complete values */
-
-    /** input channels */
-    IN_LEFT            = 0x4,
-    IN_RIGHT           = 0x8,
-    IN_FRONT           = 0x10,
-    IN_BACK            = 0x20,
-    IN_LEFT_PROCESSED  = 0x40,
-    IN_RIGHT_PROCESSED = 0x80,
-    IN_FRONT_PROCESSED = 0x100,
-    IN_BACK_PROCESSED  = 0x200,
-    IN_PRESSURE        = 0x400,
-    IN_X_AXIS          = 0x800,
-    IN_Y_AXIS          = 0x1000,
-    IN_Z_AXIS          = 0x2000,
-    IN_BACK_LEFT       = 0x10000,
-    IN_BACK_RIGHT      = 0x20000,
-    IN_CENTER          = 0x40000,
-    IN_LOW_FREQUENCY   = 0x100000,
-    IN_TOP_LEFT        = 0x200000,
-    IN_TOP_RIGHT       = 0x400000,
-
-    IN_VOICE_UPLINK    = 0x4000,
-    IN_VOICE_DNLINK    = 0x8000,
-
-    IN_MONO   = IN_FRONT,
-    IN_STEREO = (IN_LEFT | IN_RIGHT),
-    IN_FRONT_BACK = (IN_FRONT | IN_BACK),
-    IN_6 = (IN_LEFT | IN_RIGHT |
-            IN_FRONT | IN_BACK |
-            IN_LEFT_PROCESSED | IN_RIGHT_PROCESSED),
-    IN_2POINT0POINT2 = (IN_LEFT | IN_RIGHT | IN_TOP_LEFT | IN_TOP_RIGHT),
-    IN_2POINT1POINT2 = (IN_LEFT | IN_RIGHT | IN_TOP_LEFT | IN_TOP_RIGHT |
-            IN_LOW_FREQUENCY),
-    IN_3POINT0POINT2 = (IN_LEFT | IN_CENTER | IN_RIGHT | IN_TOP_LEFT | IN_TOP_RIGHT),
-    IN_3POINT1POINT2 = (IN_LEFT | IN_CENTER | IN_RIGHT |
-            IN_TOP_LEFT | IN_TOP_RIGHT | IN_LOW_FREQUENCY),
-    IN_5POINT1 = (IN_LEFT | IN_CENTER | IN_RIGHT |
-                  IN_BACK_LEFT | IN_BACK_RIGHT | IN_LOW_FREQUENCY),
-    IN_VOICE_UPLINK_MONO = (IN_VOICE_UPLINK | IN_MONO),
-    IN_VOICE_DNLINK_MONO = (IN_VOICE_DNLINK | IN_MONO),
-    IN_VOICE_CALL_MONO   = (IN_VOICE_UPLINK_MONO |
-            IN_VOICE_DNLINK_MONO),
-    // Note that the 2.0 IN_ALL* have been moved to helper functions
-
-    COUNT_MAX    = 30,
-    INDEX_HDR    = REPRESENTATION_INDEX << COUNT_MAX,
-    INDEX_MASK_1 = INDEX_HDR | ((1 << 1) - 1),
-    INDEX_MASK_2 = INDEX_HDR | ((1 << 2) - 1),
-    INDEX_MASK_3 = INDEX_HDR | ((1 << 3) - 1),
-    INDEX_MASK_4 = INDEX_HDR | ((1 << 4) - 1),
-    INDEX_MASK_5 = INDEX_HDR | ((1 << 5) - 1),
-    INDEX_MASK_6 = INDEX_HDR | ((1 << 6) - 1),
-    INDEX_MASK_7 = INDEX_HDR | ((1 << 7) - 1),
-    INDEX_MASK_8 = INDEX_HDR | ((1 << 8) - 1),
-    INDEX_MASK_9 = INDEX_HDR | ((1 << 9) - 1),
-    INDEX_MASK_10 = INDEX_HDR | ((1 << 10) - 1),
-    INDEX_MASK_11 = INDEX_HDR | ((1 << 11) - 1),
-    INDEX_MASK_12 = INDEX_HDR | ((1 << 12) - 1),
-    INDEX_MASK_13 = INDEX_HDR | ((1 << 13) - 1),
-    INDEX_MASK_14 = INDEX_HDR | ((1 << 14) - 1),
-    INDEX_MASK_15 = INDEX_HDR | ((1 << 15) - 1),
-    INDEX_MASK_16 = INDEX_HDR | ((1 << 16) - 1),
-    INDEX_MASK_17 = INDEX_HDR | ((1 << 17) - 1),
-    INDEX_MASK_18 = INDEX_HDR | ((1 << 18) - 1),
-    INDEX_MASK_19 = INDEX_HDR | ((1 << 19) - 1),
-    INDEX_MASK_20 = INDEX_HDR | ((1 << 20) - 1),
-    INDEX_MASK_21 = INDEX_HDR | ((1 << 21) - 1),
-    INDEX_MASK_22 = INDEX_HDR | ((1 << 22) - 1),
-    INDEX_MASK_23 = INDEX_HDR | ((1 << 23) - 1),
-    INDEX_MASK_24 = INDEX_HDR | ((1 << 24) - 1),
+struct AudioProfile {
+    AudioFormat format;
+    /** List of the sample rates (in Hz) supported by the profile. */
+    vec<uint32_t> sampleRates;
+    /** List of channel masks supported by the profile. */
+    vec<AudioChannelMask> channelMasks;
 };
 
 /**
@@ -607,301 +149,58 @@
     CALL_SCREEN      = 4,
 };
 
-@export(name="", value_prefix="AUDIO_DEVICE_")
-enum AudioDevice : uint32_t {
-    NONE                          = 0x0,
-    /** reserved bits */
-    BIT_IN                        = 0x80000000,
-    BIT_DEFAULT                   = 0x40000000,
-    /** output devices */
-    OUT_EARPIECE                  = 0x1,
-    OUT_SPEAKER                   = 0x2,
-    OUT_WIRED_HEADSET             = 0x4,
-    OUT_WIRED_HEADPHONE           = 0x8,
-    OUT_BLUETOOTH_SCO             = 0x10,
-    OUT_BLUETOOTH_SCO_HEADSET     = 0x20,
-    OUT_BLUETOOTH_SCO_CARKIT      = 0x40,
-    OUT_BLUETOOTH_A2DP            = 0x80,
-    OUT_BLUETOOTH_A2DP_HEADPHONES = 0x100,
-    OUT_BLUETOOTH_A2DP_SPEAKER    = 0x200,
-    OUT_AUX_DIGITAL               = 0x400,
-    OUT_HDMI                      = OUT_AUX_DIGITAL,
-    /** uses an analog connection (multiplexed over the USB pins for instance) */
-    OUT_ANLG_DOCK_HEADSET         = 0x800,
-    OUT_DGTL_DOCK_HEADSET         = 0x1000,
-    /** USB accessory mode: Android device is USB device and dock is USB host */
-    OUT_USB_ACCESSORY             = 0x2000,
-    /** USB host mode: Android device is USB host and dock is USB device */
-    OUT_USB_DEVICE                = 0x4000,
-    OUT_REMOTE_SUBMIX             = 0x8000,
-    /** Telephony voice TX path */
-    OUT_TELEPHONY_TX              = 0x10000,
-    /** Analog jack with line impedance detected */
-    OUT_LINE                      = 0x20000,
-    /** HDMI Audio Return Channel */
-    OUT_HDMI_ARC                  = 0x40000,
-    /** S/PDIF out */
-    OUT_SPDIF                     = 0x80000,
-    /** FM transmitter out */
-    OUT_FM                        = 0x100000,
-    /** Line out for av devices */
-    OUT_AUX_LINE                  = 0x200000,
-    /** limited-output speaker device for acoustic safety */
-    OUT_SPEAKER_SAFE              = 0x400000,
-    OUT_IP                        = 0x800000,
-    /** audio bus implemented by the audio system (e.g an MOST stereo channel) */
-    OUT_BUS                       = 0x1000000,
-    OUT_PROXY                     = 0x2000000,
-    OUT_USB_HEADSET               = 0x4000000,
-    OUT_HEARING_AID               = 0x8000000,
-    OUT_ECHO_CANCELLER            = 0x10000000,
-    OUT_DEFAULT                   = BIT_DEFAULT,
-    // Note that the 2.0 OUT_ALL* have been moved to helper functions
-
-    /** input devices */
-    IN_COMMUNICATION         = BIT_IN | 0x1,
-    IN_AMBIENT               = BIT_IN | 0x2,
-    IN_BUILTIN_MIC           = BIT_IN | 0x4,
-    IN_BLUETOOTH_SCO_HEADSET = BIT_IN | 0x8,
-    IN_WIRED_HEADSET         = BIT_IN | 0x10,
-    IN_AUX_DIGITAL           = BIT_IN | 0x20,
-    IN_HDMI                  = IN_AUX_DIGITAL,
-    /** Telephony voice RX path */
-    IN_VOICE_CALL            = BIT_IN | 0x40,
-    IN_TELEPHONY_RX          = IN_VOICE_CALL,
-    IN_BACK_MIC              = BIT_IN | 0x80,
-    IN_REMOTE_SUBMIX         = BIT_IN | 0x100,
-    IN_ANLG_DOCK_HEADSET     = BIT_IN | 0x200,
-    IN_DGTL_DOCK_HEADSET     = BIT_IN | 0x400,
-    IN_USB_ACCESSORY         = BIT_IN | 0x800,
-    IN_USB_DEVICE            = BIT_IN | 0x1000,
-    /** FM tuner input */
-    IN_FM_TUNER              = BIT_IN | 0x2000,
-    /** TV tuner input */
-    IN_TV_TUNER              = BIT_IN | 0x4000,
-    /** Analog jack with line impedance detected */
-    IN_LINE                  = BIT_IN | 0x8000,
-    /** S/PDIF in */
-    IN_SPDIF                 = BIT_IN | 0x10000,
-    IN_BLUETOOTH_A2DP        = BIT_IN | 0x20000,
-    IN_LOOPBACK              = BIT_IN | 0x40000,
-    IN_IP                    = BIT_IN | 0x80000,
-    /** audio bus implemented by the audio system (e.g an MOST stereo channel) */
-    IN_BUS                   = BIT_IN | 0x100000,
-    IN_PROXY                 = BIT_IN | 0x1000000,
-    IN_USB_HEADSET           = BIT_IN | 0x2000000,
-    IN_BLUETOOTH_BLE         = BIT_IN | 0x4000000,
-    IN_ECHO_REFERENCE        = BIT_IN | 0x10000000,
-    IN_DEFAULT               = BIT_IN | BIT_DEFAULT,
-
-    // Note that the 2.0 IN_ALL* have been moved to helper functions
-};
-
 /**
- * IEEE 802 MAC address.
+ * Audio device specifies type (or category) of audio I/O device
+ * (e.g. speaker or headphones).
+ * See 'audioDevice' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-typedef uint8_t[6] MacAddress;
+typedef string AudioDevice;
 
 /**
  * Specifies a device address in case when several devices of the same type
  * can be connected (e.g. BT A2DP, USB).
  */
 struct DeviceAddress {
-    AudioDevice device;  // discriminator
-    union Address {
-        MacAddress mac;     // used for BLUETOOTH_A2DP_*
-        uint8_t[4] ipv4;    // used for IP
+    /** The type of the device. */
+    AudioDevice deviceType;
+    safe_union Address {
+        /**
+         * The address may be left unspecified if 'device' specifies
+         * a physical device unambiguously.
+         */
+        Monostate unspecified;
+        /** IEEE 802 MAC address. Set for Bluetooth devices. */
+        uint8_t[6] mac;
+        /** IPv4 Address. Set for IPv4 devices. */
+        uint8_t[4] ipv4;
+        /** IPv6 Address. Set for IPv6 devices. */
+        uint16_t[8] ipv6;
+        /** PCI bus Address. Set for USB devices. */
         struct Alsa {
             int32_t card;
             int32_t device;
-        } alsa;             // used for USB_*
+        } alsa;
+        /** Arbitrary BUS device unique address. Not interpreted by the framework. */
+        string bus;
+        /** Arbitrary REMOTE_SUBMIX device unique address. Not interpreted by the HAL. */
+        string rSubmix;
     } address;
-    /** Arbitrary BUS device unique address. Should not be interpreted by the framework. */
-    string busAddress;
-    /** Arbitrary REMOTE_SUBMIX device unique address. Should not be interpreted by the HAL. */
-    string rSubmixAddress;
 };
 
 /**
- * The audio output flags serve two purposes:
- *
- *  - when an AudioTrack is created they indicate a "wish" to be connected to an
- *    output stream with attributes corresponding to the specified flags;
- *
- *  - when present in an output profile descriptor listed for a particular audio
- *    hardware module, they indicate that an output stream can be opened that
- *    supports the attributes indicated by the flags.
- *
- * The audio policy manager will try to match the flags in the request
- * (when getOuput() is called) to an available output stream.
+ * Audio usage specifies the intended use case for the sound being played.
+ * See 'audioUsage' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-@export(name="audio_output_flags_t", value_prefix="AUDIO_OUTPUT_FLAG_")
-enum AudioOutputFlag : int32_t {
-    NONE    = 0x0, // no attributes
-    DIRECT  = 0x1, // this output directly connects a track
-                   // to one output stream: no software mixer
-    PRIMARY = 0x2, // this output is the primary output of the device. It is
-                   // unique and must be present. It is opened by default and
-                   // receives routing, audio mode and volume controls related
-                   // to voice calls.
-    FAST    = 0x4,    // output supports "fast tracks", defined elsewhere
-    DEEP_BUFFER      = 0x8,   // use deep audio buffers
-    COMPRESS_OFFLOAD = 0x10,  // offload playback of compressed streams to
-                              // hardware codec
-    NON_BLOCKING     = 0x20,  // use non-blocking write
-    HW_AV_SYNC = 0x40,   // output uses a hardware A/V sync
-    TTS        = 0x80,   // output for streams transmitted through speaker at a
-                         // sample rate high enough to accommodate lower-range
-                         // ultrasonic p/b
-    RAW        = 0x100,  // minimize signal processing
-    SYNC       = 0x200,  // synchronize I/O streams
-    IEC958_NONAUDIO = 0x400, // Audio stream contains compressed audio in SPDIF
-                             // data bursts, not PCM.
-    DIRECT_PCM = 0x2000,     // Audio stream containing PCM data that needs
-                             // to pass through compress path for DSP post proc.
-    MMAP_NOIRQ = 0x4000, // output operates in MMAP no IRQ mode.
-    VOIP_RX = 0x8000,    // preferred output for VoIP calls.
-    /** preferred output for call music */
-    INCALL_MUSIC = 0x10000,
-};
+typedef string AudioUsage;
 
 /**
- * The audio input flags are analogous to audio output flags.
- * Currently they are used only when an AudioRecord is created,
- * to indicate a preference to be connected to an input stream with
- * attributes corresponding to the specified flags.
+ * Audio content type expresses the general category of the content.
+ * See 'audioContentType' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-@export(name="audio_input_flags_t", value_prefix="AUDIO_INPUT_FLAG_")
-enum AudioInputFlag : int32_t {
-    NONE         = 0x0,  // no attributes
-    FAST         = 0x1,  // prefer an input that supports "fast tracks"
-    HW_HOTWORD   = 0x2,  // prefer an input that captures from hw hotword source
-    RAW          = 0x4,  // minimize signal processing
-    SYNC         = 0x8,  // synchronize I/O streams
-    MMAP_NOIRQ   = 0x10, // input operates in MMAP no IRQ mode.
-    VOIP_TX      = 0x20, // preferred input for VoIP calls.
-    HW_AV_SYNC   = 0x40, // input connected to an output that uses a hardware A/V sync
-    DIRECT       = 0x80, // for acquiring encoded streams
-};
-
-@export(name="audio_usage_t", value_prefix="AUDIO_USAGE_")
-enum AudioUsage : int32_t {
-    // These values must kept in sync with
-    //  frameworks/base/media/java/android/media/AudioAttributes.java
-    // Note that not all framework values are exposed
-    /**
-     * Usage value to use when the usage is unknown.
-     */
-    UNKNOWN                            = 0,
-    /**
-     * Usage value to use when the usage is media, such as music, or movie
-     * soundtracks.
-     */
-    MEDIA                              = 1,
-    /**
-     * Usage value to use when the usage is voice communications, such as
-     * telephony or VoIP.
-     */
-    VOICE_COMMUNICATION                = 2,
-    /**
-     * Usage value to use when the usage is in-call signalling, such as with
-     * a "busy" beep, or DTMF tones.
-     */
-    VOICE_COMMUNICATION_SIGNALLING     = 3,
-    /**
-     * Usage value to use when the usage is an alarm (e.g. wake-up alarm).
-     */
-    ALARM                              = 4,
-    /**
-     * Usage value to use when the usage is a generic notification.
-     */
-    NOTIFICATION                       = 5,
-    /**
-     * Usage value to use when the usage is telephony ringtone.
-     */
-    NOTIFICATION_TELEPHONY_RINGTONE    = 6,
-    /**
-     * Usage value to use when the usage is for accessibility, such as with
-     * a screen reader.
-     */
-    ASSISTANCE_ACCESSIBILITY           = 11,
-    /**
-     * Usage value to use when the usage is driving or navigation directions.
-     */
-    ASSISTANCE_NAVIGATION_GUIDANCE     = 12,
-    /**
-     * Usage value to use when the usage is sonification, such as  with user
-     * interface sounds.
-     */
-    ASSISTANCE_SONIFICATION            = 13,
-    /**
-     * Usage value to use when the usage is for game audio.
-     */
-    GAME                               = 14,
-    /**
-     * Usage value to use when feeding audio to the platform and replacing
-     * "traditional" audio source, such as audio capture devices.
-     */
-    VIRTUAL_SOURCE                     = 15,
-    /**
-     * Usage value to use for audio responses to user queries, audio
-     * instructions or help utterances.
-     */
-    ASSISTANT                          = 16,
-    /**
-     * Usage value to use for assistant voice interaction with remote caller
-     * on Cell and VoIP calls.
-     */
-    CALL_ASSISTANT                     = 17,
-    /**
-     * Usage value to use when the usage is an emergency.
-     */
-    EMERGENCY                          = 1000,
-    /**
-     * Usage value to use when the usage is a safety sound.
-     */
-    SAFETY                             = 1001,
-    /**
-     * Usage value to use when the usage is a vehicle status.
-     */
-    VEHICLE_STATUS                     = 1002,
-    /**
-     * Usage value to use when the usage is an announcement.
-     */
-    ANNOUNCEMENT                       = 1003,
-};
-
-/** Type of audio generated by an application. */
-@export(name="audio_content_type_t", value_prefix="AUDIO_CONTENT_TYPE_")
-enum AudioContentType : uint32_t {
-    // Do not change these values without updating their counterparts
-    // in frameworks/base/media/java/android/media/AudioAttributes.java
-    /**
-     * Content type value to use when the content type is unknown, or other than
-     * the ones defined.
-     */
-    UNKNOWN      = 0,
-    /**
-     * Content type value to use when the content type is speech.
-     */
-    SPEECH       = 1,
-    /**
-     * Content type value to use when the content type is music.
-     */
-    MUSIC        = 2,
-    /**
-     * Content type value to use when the content type is a soundtrack,
-     * typically accompanying a movie or TV program.
-     */
-    MOVIE        = 3,
-    /**
-     * Content type value to use when the content type is a sound used to
-     * accompany a user action, such as a beep or sound effect expressing a key
-     * click, or event, such as the type of a sound for a bonus being received
-     * in a game. These sounds are mostly synthesized or short Foley sounds.
-     */
-    SONIFICATION = 4,
-};
+typedef string AudioContentType;
 
 /** Encapsulation mode used for sending audio compressed data. */
 @export(name="audio_encapsulation_mode_t", value_prefix="AUDIO_ENCAPSULATION_MODE_")
@@ -926,9 +225,7 @@
  * Additional information about the stream passed to hardware decoders.
  */
 struct AudioOffloadInfo {
-    uint32_t sampleRateHz;
-    bitfield<AudioChannelMask> channelMask;
-    AudioFormat format;
+    AudioConfigBase base;
     AudioStreamType streamType;
     uint32_t bitRatePerSecond;
     int64_t durationMicroseconds;  // -1 if unknown
@@ -946,9 +243,7 @@
  * Commonly used audio stream configuration parameters.
  */
 struct AudioConfig {
-    uint32_t sampleRateHz;
-    bitfield<AudioChannelMask> channelMask;
-    AudioFormat format;
+    AudioConfigBase base;
     AudioOffloadInfo offloadInfo;
     uint64_t frameCount;
 };
@@ -985,8 +280,7 @@
     safe_union Destination {
         Monostate unspecified;
         DeviceAddress device;
-    };
-    Destination destination;
+    } destination;
 };
 
 /** Metadatas of the sink of a StreamIn. */
@@ -994,7 +288,6 @@
     vec<RecordTrackMetadata> tracks;
 };
 
-
 /*
  *
  *  Volume control
@@ -1003,21 +296,18 @@
 
 /**
  * Type of gain control exposed by an audio port.
+ * See 'audioGainMode' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-@export(name="", value_prefix="AUDIO_GAIN_MODE_")
-enum AudioGainMode : uint32_t {
-    JOINT = 0x1,    // supports joint channel gain control
-    CHANNELS = 0x2, // supports separate channel gain control
-    RAMP = 0x4      // supports gain ramps
-};
+typedef string AudioGainMode;
 
 /**
  * An audio_gain struct is a representation of a gain stage.
  * A gain stage is always attached to an audio port.
  */
 struct AudioGain {
-    bitfield<AudioGainMode> mode;
-    bitfield<AudioChannelMask> channelMask; // channels which gain an be controlled
+    vec<AudioGainMode> mode; // modes of operation
+    AudioChannelMask channelMask; // channels which gain can be controlled
     int32_t minValue;     // minimum gain value in millibels
     int32_t maxValue;     // maximum gain value in millibels
     int32_t defaultValue; // default gain value in millibels
@@ -1032,11 +322,9 @@
  */
 struct AudioGainConfig {
     int32_t index;  // index of the corresponding AudioGain in AudioPort.gains
-    AudioGainMode mode;
+    vec<AudioGainMode> mode; // modes of operation
     AudioChannelMask channelMask;  // channels which gain value follows
     /**
-     * 4 = sizeof(AudioChannelMask),
-     * 8 is not "FCC_8", so it won't need to be changed for > 8 channels.
      * Gain values in millibels for each channel ordered from LSb to MSb in
      * channel mask. The number of values is 1 in joint mode or
      * popcount(channel_mask).
@@ -1060,132 +348,78 @@
  * the interface.
  */
 
-/** Audio port role: either source or sink */
-@export(name="audio_port_role_t", value_prefix="AUDIO_PORT_ROLE_")
-enum AudioPortRole : int32_t {
-    NONE,
-    SOURCE,
-    SINK,
-};
-
 /**
- * Audio port type indicates if it is a session (e.g AudioTrack), a mix (e.g
- * PlaybackThread output) or a physical device (e.g OUT_SPEAKER)
+ * A helper aggregate structure providing parameters that depend on the
+ * port role.
  */
-@export(name="audio_port_type_t", value_prefix="AUDIO_PORT_TYPE_")
-enum AudioPortType : int32_t {
-    NONE,
-    DEVICE,
-    MIX,
-    SESSION,
-};
-
-/**
- * Extension for audio port configuration structure when the audio port is a
- * hardware device.
- */
-struct AudioPortConfigDeviceExt {
-    AudioModuleHandle hwModule;  // module the device is attached to
-    AudioDevice type;            // device type (e.g OUT_SPEAKER)
-    uint8_t[32] address;         // device address. "" if N/A
-};
-
-/**
- * Extension for audio port configuration structure when the audio port is an
- * audio session.
- */
-struct AudioPortConfigSessionExt {
+safe_union AudioPortExtendedInfo {
+    /** Set when no information is provided. */
+    Monostate unspecified;
+    /** Set when the audio port is an audio device. */
+    DeviceAddress device;
+    /** Set when the audio port is a mix. The handle is of a stream. */
+    struct AudioPortMixExt {
+        /** I/O handle of the input/output stream. */
+        AudioIoHandle ioHandle;
+        safe_union UseCase {
+            /** Specified when the port is in the SOURCE role. */
+            AudioStreamType stream;
+            /** Specified when the port is in the SINK role. */
+            AudioSource source;
+        } useCase;
+    } mix;
+    /** Set when the audio port is an audio session. */
     AudioSession session;
 };
 
 /**
- * Flags indicating which fields are to be considered in AudioPortConfig.
- */
-@export(name="", value_prefix="AUDIO_PORT_CONFIG_")
-enum AudioPortConfigMask : uint32_t {
-    SAMPLE_RATE = 0x1,
-    CHANNEL_MASK =  0x2,
-    FORMAT = 0x4,
-    GAIN = 0x8,
-};
-
-/**
  * Audio port configuration structure used to specify a particular configuration
  * of an audio port.
  */
 struct AudioPortConfig {
+    /**
+     * The 'id' field is set when it is needed to select the port and
+     * apply new configuration for it.
+     */
     AudioPortHandle id;
-    bitfield<AudioPortConfigMask> configMask;
-    uint32_t sampleRateHz;
-    bitfield<AudioChannelMask> channelMask;
-    AudioFormat format;
-    AudioGainConfig gain;
-    AudioPortType type;  // type is used as a discriminator for Ext union
-    AudioPortRole role;  // role is used as a discriminator for UseCase union
-    union Ext {
-        AudioPortConfigDeviceExt device;
-        struct AudioPortConfigMixExt {
-            AudioModuleHandle hwModule; // module the stream is attached to
-            AudioIoHandle ioHandle;     // I/O handle of the input/output stream
-            union UseCase {
-                AudioStreamType stream;
-                AudioSource source;
-            } useCase;
-        } mix;
-        AudioPortConfigSessionExt session;
-    } ext;
+    /**
+     * Basic parameters: sampling rate, format, channel mask. Only some of the
+     * parameters (or none) may be set. See the documentation of the
+     * AudioConfigBase struct.
+     */
+    AudioConfigBase config;
+    /** Associated gain control. */
+    safe_union OptionalGain {
+        Monostate unspecified;
+        AudioGainConfig config;
+    } gain;
+    /** Parameters that depend on the actual port role. */
+    AudioPortExtendedInfo ext;
 };
 
 /**
- * Extension for audio port structure when the audio port is a hardware device.
+ * Audio port structure describes the capabilities of an audio port
+ * as well as its current configuration.
  */
-struct AudioPortDeviceExt {
-    AudioModuleHandle hwModule;    // module the device is attached to
-    AudioDevice type;
-    /** 32 byte string identifying the port. */
-    uint8_t[32] address;
-};
-
-/**
- * Latency class of the audio mix.
- */
-@export(name="audio_mix_latency_class_t", value_prefix="AUDIO_LATENCY_")
-enum AudioMixLatencyClass : int32_t {
-    LOW,
-    NORMAL
-};
-
-struct AudioPortMixExt {
-    AudioModuleHandle hwModule;     // module the stream is attached to
-    AudioIoHandle ioHandle;         // I/O handle of the stream
-    AudioMixLatencyClass latencyClass;
-};
-
-/**
- * Extension for audio port structure when the audio port is an audio session.
- */
-struct AudioPortSessionExt {
-    AudioSession session;
-};
-
 struct AudioPort {
+    /**
+     * Unique identifier of the port within this HAL service. When calling
+     * from the client side functions like IDevice.getAudioPort is it allowed
+     * to only specify the 'id' and leave the other fields unspecified.
+     */
     AudioPortHandle id;
-    AudioPortRole role;
+    /**
+     * Human-readable name describing the function of the port.
+     * E.g. "telephony_tx" or "fm_tuner".
+     */
     string name;
-    vec<uint32_t> sampleRates;
-    vec<bitfield<AudioChannelMask>> channelMasks;
-    vec<AudioFormat> formats;
+    /** List of audio profiles supported by the port. */
+    vec<AudioProfile> profiles;
+    /** List of gain controls attached to the port. */
     vec<AudioGain> gains;
-    AudioPortConfig activeConfig; // current audio port configuration
-    AudioPortType type;  // type is used as a discriminator
-    union Ext {
-        AudioPortDeviceExt device;
-        AudioPortMixExt mix;
-        AudioPortSessionExt session;
-    } ext;
-};
-
-struct ThreadInfo {
-    int64_t pid;
-    int64_t tid;
+    /**
+     * Current configuration of the audio port, may have all the fields left
+     * unspecified.
+     */
+    AudioPortConfig activeConfig;
 };
diff --git a/audio/common/all-versions/default/VersionUtils.h b/audio/common/all-versions/default/VersionUtils.h
index e7755b1..9bfca0c 100644
--- a/audio/common/all-versions/default/VersionUtils.h
+++ b/audio/common/all-versions/default/VersionUtils.h
@@ -31,7 +31,7 @@
 typedef common::CPP_VERSION::AudioChannelMask AudioChannelBitfield;
 typedef common::CPP_VERSION::AudioOutputFlag AudioOutputFlagBitfield;
 typedef common::CPP_VERSION::AudioInputFlag AudioInputFlagBitfield;
-#elif MAJOR_VERSION >= 4
+#elif MAJOR_VERSION >= 4 && MAJOR_VERSION <= 6
 typedef hidl_bitfield<common::CPP_VERSION::AudioDevice> AudioDeviceBitfield;
 typedef hidl_bitfield<common::CPP_VERSION::AudioChannelMask> AudioChannelBitfield;
 typedef hidl_bitfield<common::CPP_VERSION::AudioOutputFlag> AudioOutputFlagBitfield;
diff --git a/audio/core/all-versions/default/Conversions.cpp b/audio/core/all-versions/default/Conversions.cpp
index eddff55..0b6ad80 100644
--- a/audio/core/all-versions/default/Conversions.cpp
+++ b/audio/core/all-versions/default/Conversions.cpp
@@ -31,7 +31,7 @@
     // HAL assumes that the address is NUL-terminated.
     char halAddress[AUDIO_DEVICE_MAX_ADDRESS_LEN];
     memset(halAddress, 0, sizeof(halAddress));
-    uint32_t halDevice = static_cast<uint32_t>(address.device);
+    audio_devices_t halDevice = static_cast<audio_devices_t>(address.device);
     if (getAudioDeviceOutAllA2dpSet().count(halDevice) > 0 ||
         halDevice == AUDIO_DEVICE_IN_BLUETOOTH_A2DP) {
         snprintf(halAddress, sizeof(halAddress), "%02X:%02X:%02X:%02X:%02X:%02X",
diff --git a/audio/core/all-versions/default/include/core/default/Device.h b/audio/core/all-versions/default/include/core/default/Device.h
index b0e72d9..907acd7 100644
--- a/audio/core/all-versions/default/include/core/default/Device.h
+++ b/audio/core/all-versions/default/include/core/default/Device.h
@@ -43,8 +43,10 @@
 using ::android::hardware::hidl_vec;
 using ::android::hardware::Return;
 using ::android::hardware::Void;
+#if MAJOR_VERSION <= 6
 using ::android::hardware::audio::common::CPP_VERSION::implementation::AudioInputFlagBitfield;
 using ::android::hardware::audio::common::CPP_VERSION::implementation::AudioOutputFlagBitfield;
+#endif
 using namespace ::android::hardware::audio::common::CPP_VERSION;
 using namespace ::android::hardware::audio::CPP_VERSION;
 
diff --git a/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalTest.cpp b/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalTest.cpp
index b0eb2e0..2466fd1 100644
--- a/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalTest.cpp
+++ b/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalTest.cpp
@@ -16,6 +16,13 @@
 
 #include "AudioPrimaryHidlHalTest.h"
 
+#if MAJOR_VERSION >= 7
+#include <audio_policy_configuration_V7_0.h>
+#include <xsdc/XsdcSupport.h>
+
+using android::xsdc_enum_range;
+#endif
+
 TEST_P(AudioHidlTest, OpenPrimaryDeviceUsingGetDevice) {
     doc::test("Calling openDevice(\"primary\") should return the primary device.");
     if (getDeviceName() != DeviceManager::kPrimaryDevice) {
@@ -53,14 +60,29 @@
             "Make sure getMicrophones always succeeds"
             "and getActiveMicrophones always succeeds when recording from these microphones.");
         AudioConfig config{};
+#if MAJOR_VERSION <= 6
         config.channelMask = mkEnumBitfield(AudioChannelMask::IN_MONO);
         config.sampleRateHz = 8000;
         config.format = AudioFormat::PCM_16_BIT;
         auto flags = hidl_bitfield<AudioInputFlag>(AudioInputFlag::NONE);
         const SinkMetadata initMetadata = {{{.source = AudioSource::MIC, .gain = 1}}};
+#elif MAJOR_VERSION >= 7
+        config.base.channelMask.resize(1);
+        config.base.channelMask[0] = toString(xsd::AudioChannelMask::AUDIO_CHANNEL_IN_MONO);
+        config.base.sampleRateHz = 8000;
+        config.base.format = toString(xsd::AudioFormat::AUDIO_FORMAT_PCM_16_BIT);
+        hidl_vec<hidl_string> flags;
+        const SinkMetadata initMetadata = {
+                {{.source = toString(xsd::AudioSource::AUDIO_SOURCE_MIC), .gain = 1}}};
+#endif
         EventFlag* efGroup;
         for (auto microphone : microphones) {
+#if MAJOR_VERSION <= 6
             if (microphone.deviceAddress.device != AudioDevice::IN_BUILTIN_MIC) {
+#elif MAJOR_VERSION >= 7
+            if (xsd::stringToAudioDevice(microphone.deviceAddress.deviceType) !=
+                xsd::AudioDevice::AUDIO_DEVICE_IN_BUILTIN_MIC) {
+#endif
                 continue;
             }
             sp<IStreamIn> stream;
@@ -81,16 +103,16 @@
             size_t frameSize = stream->getFrameSize();
             size_t frameCount = stream->getBufferSize() / frameSize;
             ASSERT_OK(stream->prepareForReading(
-                frameSize, frameCount, [&](auto r, auto& c, auto& d, auto&, auto&) {
-                    readRes = r;
-                    if (readRes == Result::OK) {
-                        commandMQ.reset(new CommandMQ(c));
-                        dataMQ.reset(new DataMQ(d));
-                        if (dataMQ->isValid() && dataMQ->getEventFlagWord()) {
-                            EventFlag::createEventFlag(dataMQ->getEventFlagWord(), &efGroup);
+                    frameSize, frameCount, [&](auto r, auto& c, auto& d, auto&, auto) {
+                        readRes = r;
+                        if (readRes == Result::OK) {
+                            commandMQ.reset(new CommandMQ(c));
+                            dataMQ.reset(new DataMQ(d));
+                            if (dataMQ->isValid() && dataMQ->getEventFlagWord()) {
+                                EventFlag::createEventFlag(dataMQ->getEventFlagWord(), &efGroup);
+                            }
                         }
-                    }
-                }));
+                    }));
             ASSERT_OK(readRes);
             IStreamIn::ReadParameters params;
             params.command = IStreamIn::ReadCommand::READ;
@@ -116,13 +138,24 @@
 
 TEST_P(AudioHidlDeviceTest, SetConnectedState) {
     doc::test("Check that the HAL can be notified of device connection and deconnection");
+#if MAJOR_VERSION <= 6
     using AD = AudioDevice;
     for (auto deviceType : {AD::OUT_HDMI, AD::OUT_WIRED_HEADPHONE, AD::IN_USB_HEADSET}) {
+#elif MAJOR_VERSION >= 7
+    using AD = xsd::AudioDevice;
+    for (auto deviceType :
+         {toString(AD::AUDIO_DEVICE_OUT_HDMI), toString(AD::AUDIO_DEVICE_OUT_WIRED_HEADPHONE),
+          toString(AD::AUDIO_DEVICE_IN_USB_HEADSET)}) {
+#endif
         SCOPED_TRACE("device=" + ::testing::PrintToString(deviceType));
         for (bool state : {true, false}) {
             SCOPED_TRACE("state=" + ::testing::PrintToString(state));
             DeviceAddress address = {};
+#if MAJOR_VERSION <= 6
             address.device = deviceType;
+#elif MAJOR_VERSION >= 7
+            address.deviceType = deviceType;
+#endif
             auto ret = getDevice()->setConnectedState(address, state);
             ASSERT_TRUE(ret.isOk());
             if (ret == Result::NOT_SUPPORTED) {
@@ -148,7 +181,11 @@
     }
     // The stream was constructed with one device, thus getDevices must only return one
     ASSERT_EQ(1U, devices.size());
+#if MAJOR_VERSION <= 6
     AudioDevice device = devices[0].device;
+#elif MAJOR_VERSION >= 7
+    auto device = devices[0].deviceType;
+#endif
     ASSERT_TRUE(device == expectedDevice)
         << "Expected: " << ::testing::PrintToString(expectedDevice)
         << "\n  Actual: " << ::testing::PrintToString(device);
@@ -156,12 +193,22 @@
 
 TEST_IO_STREAM(GetDevices, "Check that the stream device == the one it was opened with",
                areAudioPatchesSupported() ? doc::partialTest("Audio patches are supported")
+#if MAJOR_VERSION <= 6
                                           : testGetDevices(stream.get(), address.device))
+#elif MAJOR_VERSION >= 7
+                                          : testGetDevices(stream.get(), address.deviceType))
+#endif
 
 static void testSetDevices(IStream* stream, const DeviceAddress& address) {
     DeviceAddress otherAddress = address;
+#if MAJOR_VERSION <= 6
     otherAddress.device = (address.device & AudioDevice::BIT_IN) == 0 ? AudioDevice::OUT_SPEAKER
                                                                       : AudioDevice::IN_BUILTIN_MIC;
+#elif MAJOR_VERSION >= 7
+    otherAddress.deviceType = xsd::isOutputDevice(address.deviceType)
+                                      ? toString(xsd::AudioDevice::AUDIO_DEVICE_OUT_SPEAKER)
+                                      : toString(xsd::AudioDevice::AUDIO_DEVICE_IN_BUILTIN_MIC);
+#endif
     EXPECT_RESULT(okOrNotSupported, stream->setDevices({otherAddress}));
 
     ASSERT_RESULT(okOrNotSupported,
@@ -186,11 +233,19 @@
 TEST_P(InputStreamTest, updateSinkMetadata) {
     doc::test("The HAL should not crash on metadata change");
 
+#if MAJOR_VERSION <= 6
     hidl_enum_range<AudioSource> range;
+#elif MAJOR_VERSION >= 7
+    xsdc_enum_range<audio::policy::configuration::V7_0::AudioSource> range;
+#endif
     // Test all possible track configuration
-    for (AudioSource source : range) {
+    for (auto source : range) {
         for (float volume : {0.0, 0.5, 1.0}) {
+#if MAJOR_VERSION <= 6
             const SinkMetadata metadata = {{{.source = source, .gain = volume}}};
+#elif MAJOR_VERSION >= 7
+            const SinkMetadata metadata = {{{.source = toString(source), .gain = volume}}};
+#endif
             ASSERT_OK(stream->updateSinkMetadata(metadata))
                 << "source=" << toString(source) << ", volume=" << volume;
         }
@@ -213,13 +268,22 @@
 TEST_P(OutputStreamTest, updateSourceMetadata) {
     doc::test("The HAL should not crash on metadata change");
 
+#if MAJOR_VERSION <= 6
     hidl_enum_range<AudioUsage> usageRange;
     hidl_enum_range<AudioContentType> contentRange;
+#elif MAJOR_VERSION >= 7
+    xsdc_enum_range<audio::policy::configuration::V7_0::AudioUsage> usageRange;
+    xsdc_enum_range<audio::policy::configuration::V7_0::AudioContentType> contentRange;
+#endif
     // Test all possible track configuration
     for (auto usage : usageRange) {
         for (auto content : contentRange) {
             for (float volume : {0.0, 0.5, 1.0}) {
+#if MAJOR_VERSION <= 6
                 const SourceMetadata metadata = {{{usage, content, volume}}};
+#elif MAJOR_VERSION >= 7
+                const SourceMetadata metadata = {{{toString(usage), toString(content), volume}}};
+#endif
                 ASSERT_OK(stream->updateSourceMetadata(metadata))
                     << "usage=" << toString(usage) << ", content=" << toString(content)
                     << ", volume=" << volume;
@@ -227,12 +291,26 @@
         }
     }
 
+    // clang-format off
     // Set many track of different configuration
     ASSERT_OK(stream->updateSourceMetadata(
+#if MAJOR_VERSION <= 6
         {{{AudioUsage::MEDIA, AudioContentType::MUSIC, 0.1},
           {AudioUsage::VOICE_COMMUNICATION, AudioContentType::SPEECH, 1.0},
           {AudioUsage::ALARM, AudioContentType::SONIFICATION, 0.0},
-          {AudioUsage::ASSISTANT, AudioContentType::UNKNOWN, 0.3}}}));
+          {AudioUsage::ASSISTANT, AudioContentType::UNKNOWN, 0.3}}}
+#elif MAJOR_VERSION >= 7
+        {{{toString(xsd::AudioUsage::AUDIO_USAGE_MEDIA),
+                      toString(xsd::AudioContentType::AUDIO_CONTENT_TYPE_MUSIC), 0.1},
+          {toString(xsd::AudioUsage::AUDIO_USAGE_VOICE_COMMUNICATION),
+                      toString(xsd::AudioContentType::AUDIO_CONTENT_TYPE_SPEECH), 1.0},
+          {toString(xsd::AudioUsage::AUDIO_USAGE_ALARM),
+                      toString(xsd::AudioContentType::AUDIO_CONTENT_TYPE_SONIFICATION), 0.0},
+          {toString(xsd::AudioUsage::AUDIO_USAGE_ASSISTANT),
+                      toString(xsd::AudioContentType::AUDIO_CONTENT_TYPE_UNKNOWN), 0.3}}}
+#endif
+    ));
+    // clang-format on
 
     // Set no metadata as if all stream track had stopped
     ASSERT_OK(stream->updateSourceMetadata({}));
diff --git a/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h b/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h
index 7a52d0e..81a1f7b 100644
--- a/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h
+++ b/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h
@@ -56,6 +56,7 @@
     }
 };
 
+#if MAJOR_VERSION <= 6
 struct GetSupported {
     static auto getFormat(IStream* stream) {
         auto ret = stream->getFormat();
@@ -80,7 +81,7 @@
         EXPECT_OK(stream->getSupportedFormats(returnIn(capabilities)));
         return Result::OK;
     }
-#elif MAJOR_VERSION >= 6
+#else  // MAJOR_VERSION == 6
     static Result formats(IStream* stream, hidl_vec<AudioFormat>& capabilities) {
         Result res;
         EXPECT_OK(stream->getSupportedFormats(returnIn(res, capabilities)));
@@ -88,6 +89,7 @@
     }
 #endif
 };
+#endif  // MAJOR_VERSION <= 6
 
 template <class T>
 auto dump(T t, hidl_handle handle) {
diff --git a/audio/core/all-versions/vts/functional/6.0/AudioPrimaryHidlHalTest.cpp b/audio/core/all-versions/vts/functional/6.0/AudioPrimaryHidlHalTest.cpp
index 54d4bbd..bd8de2d 100644
--- a/audio/core/all-versions/vts/functional/6.0/AudioPrimaryHidlHalTest.cpp
+++ b/audio/core/all-versions/vts/functional/6.0/AudioPrimaryHidlHalTest.cpp
@@ -17,6 +17,7 @@
 // pull in all the <= 5.0 tests
 #include "5.0/AudioPrimaryHidlHalTest.cpp"
 
+#if MAJOR_VERSION <= 6
 const std::vector<DeviceConfigParameter>& getOutputDeviceConfigParameters() {
     static std::vector<DeviceConfigParameter> parameters = [] {
         std::vector<DeviceConfigParameter> result;
@@ -28,8 +29,8 @@
                     const auto& channels = profile->getChannels();
                     const auto& sampleRates = profile->getSampleRates();
                     auto configs = ConfigHelper::combineAudioConfig(
-                            vector<audio_channel_mask_t>(channels.begin(), channels.end()),
-                            vector<uint32_t>(sampleRates.begin(), sampleRates.end()),
+                            std::vector<audio_channel_mask_t>(channels.begin(), channels.end()),
+                            std::vector<uint32_t>(sampleRates.begin(), sampleRates.end()),
                             profile->getFormat());
                     auto flags = ioProfile->getFlags();
                     for (auto& config : configs) {
@@ -46,8 +47,8 @@
                             config.offloadInfo.bufferSize = 256;  // arbitrary value
                             config.offloadInfo.usage = AudioUsage::MEDIA;
                             result.emplace_back(device, config,
-                                                AudioOutputFlag(AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD |
-                                                                AUDIO_OUTPUT_FLAG_DIRECT));
+                                                AudioOutputFlag(AudioOutputFlag::COMPRESS_OFFLOAD |
+                                                                AudioOutputFlag::DIRECT));
                         } else {
                             if (flags & AUDIO_OUTPUT_FLAG_PRIMARY) {  // ignore the flag
                                 flags &= ~AUDIO_OUTPUT_FLAG_PRIMARY;
@@ -74,8 +75,8 @@
                     const auto& channels = profile->getChannels();
                     const auto& sampleRates = profile->getSampleRates();
                     auto configs = ConfigHelper::combineAudioConfig(
-                            vector<audio_channel_mask_t>(channels.begin(), channels.end()),
-                            vector<uint32_t>(sampleRates.begin(), sampleRates.end()),
+                            std::vector<audio_channel_mask_t>(channels.begin(), channels.end()),
+                            std::vector<uint32_t>(sampleRates.begin(), sampleRates.end()),
                             profile->getFormat());
                     for (const auto& config : configs) {
                         result.emplace_back(device, config, AudioInputFlag(ioProfile->getFlags()));
@@ -87,13 +88,22 @@
     }();
     return parameters;
 }
+#endif  // MAJOR_VERSION <= 6
 
 TEST_P(AudioHidlDeviceTest, CloseDeviceWithOpenedOutputStreams) {
     doc::test("Verify that a device can't be closed if there are streams opened");
+#if MAJOR_VERSION <= 6
     DeviceAddress address{.device = AudioDevice::OUT_DEFAULT};
-    AudioConfig config{};
-    auto flags = hidl_bitfield<AudioOutputFlag>(AudioOutputFlag::NONE);
     SourceMetadata initMetadata = {{{AudioUsage::MEDIA, AudioContentType::MUSIC, 1 /* gain */}}};
+    auto flags = hidl_bitfield<AudioOutputFlag>(AudioOutputFlag::NONE);
+#elif MAJOR_VERSION >= 7
+    DeviceAddress address{.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_OUT_DEFAULT)};
+    SourceMetadata initMetadata = {
+            {{toString(xsd::AudioUsage::AUDIO_USAGE_MEDIA),
+              toString(xsd::AudioContentType::AUDIO_CONTENT_TYPE_MUSIC), 1 /* gain */}}};
+    hidl_vec<AudioInOutFlag> flags;
+#endif
+    AudioConfig config{};
     sp<IStreamOut> stream;
     StreamHelper<IStreamOut> helper(stream);
     AudioConfig suggestedConfig{};
@@ -111,14 +121,20 @@
 
 TEST_P(AudioHidlDeviceTest, CloseDeviceWithOpenedInputStreams) {
     doc::test("Verify that a device can't be closed if there are streams opened");
-    auto module = getCachedPolicyConfig().getModuleFromName(getDeviceName());
-    if (module->getInputProfiles().empty()) {
+    if (!getCachedPolicyConfig().haveInputProfilesInModule(getDeviceName())) {
         GTEST_SKIP() << "Device doesn't have input profiles";
     }
+#if MAJOR_VERSION <= 6
     DeviceAddress address{.device = AudioDevice::IN_DEFAULT};
-    AudioConfig config{};
-    auto flags = hidl_bitfield<AudioInputFlag>(AudioInputFlag::NONE);
     SinkMetadata initMetadata = {{{.source = AudioSource::MIC, .gain = 1}}};
+    auto flags = hidl_bitfield<AudioInputFlag>(AudioInputFlag::NONE);
+#elif MAJOR_VERSION >= 7
+    DeviceAddress address{.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_IN_DEFAULT)};
+    SinkMetadata initMetadata = {
+            {{.source = toString(xsd::AudioSource::AUDIO_SOURCE_MIC), .gain = 1}}};
+    hidl_vec<AudioInOutFlag> flags;
+#endif
+    AudioConfig config{};
     sp<IStreamIn> stream;
     StreamHelper<IStreamIn> helper(stream);
     AudioConfig suggestedConfig{};
@@ -137,9 +153,8 @@
 TEST_P(AudioPatchHidlTest, UpdatePatchInvalidHandle) {
     doc::test("Verify that passing an invalid handle to updateAudioPatch is checked");
     AudioPatchHandle ignored;
-    ASSERT_OK(getDevice()->updateAudioPatch(
-            static_cast<int32_t>(AudioHandleConsts::AUDIO_PATCH_HANDLE_NONE),
-            hidl_vec<AudioPortConfig>(), hidl_vec<AudioPortConfig>(), returnIn(res, ignored)));
+    ASSERT_OK(getDevice()->updateAudioPatch(AudioPatchHandle{}, hidl_vec<AudioPortConfig>(),
+                                            hidl_vec<AudioPortConfig>(), returnIn(res, ignored)));
     ASSERT_RESULT(Result::INVALID_ARGUMENTS, res);
 }
 
diff --git a/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp b/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
index 33efa6f..63eaea8 100644
--- a/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
+++ b/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
@@ -16,3 +16,101 @@
 
 // pull in all the <= 6.0 tests
 #include "6.0/AudioPrimaryHidlHalTest.cpp"
+
+static std::vector<AudioConfig> combineAudioConfig(std::vector<xsd::AudioChannelMask> channelMasks,
+                                                   std::vector<int64_t> sampleRates,
+                                                   const std::string& format) {
+    std::vector<AudioConfig> configs;
+    configs.reserve(channelMasks.size() * sampleRates.size());
+    for (auto channelMask : channelMasks) {
+        for (auto sampleRate : sampleRates) {
+            AudioConfig config{};
+            // leave offloadInfo to 0
+            config.base.channelMask.resize(1);
+            config.base.channelMask[0] = toString(channelMask);
+            config.base.sampleRateHz = sampleRate;
+            config.base.format = format;
+            configs.push_back(config);
+        }
+    }
+    return configs;
+}
+
+const std::vector<DeviceConfigParameter>& getOutputDeviceConfigParameters() {
+    static std::vector<DeviceConfigParameter> parameters = [] {
+        std::vector<DeviceConfigParameter> result;
+        const std::vector<AudioInOutFlag> offloadFlags = {
+                toString(xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD),
+                toString(xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_DIRECT)};
+        for (const auto& device : getDeviceParameters()) {
+            auto module =
+                    getCachedPolicyConfig().getModuleFromName(std::get<PARAM_DEVICE_NAME>(device));
+            for (const auto& mixPort : module->getFirstMixPorts()->getMixPort()) {
+                if (mixPort.getRole() != xsd::Role::source) continue;  // not an output profile
+                auto xsdFlags = mixPort.getFlags();
+                const bool isOffload =
+                        std::find(xsdFlags.begin(), xsdFlags.end(),
+                                  xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) !=
+                        xsdFlags.end();
+                std::vector<AudioInOutFlag> flags;
+                if (!isOffload) {
+                    for (auto flag : xsdFlags) {
+                        if (flag != xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_PRIMARY) {
+                            flags.push_back(toString(flag));
+                        }
+                    }
+                } else {
+                    flags = offloadFlags;
+                }
+                for (const auto& profile : mixPort.getProfile()) {
+                    auto configs =
+                            combineAudioConfig(profile.getChannelMasks(),
+                                               profile.getSamplingRates(), profile.getFormat());
+                    for (auto& config : configs) {
+                        // Some combinations of flags declared in the config file require special
+                        // treatment.
+                        if (isOffload) {
+                            config.offloadInfo.base = config.base;
+                            config.offloadInfo.streamType =
+                                    toString(xsd::AudioStreamType::AUDIO_STREAM_MUSIC);
+                            config.offloadInfo.usage = toString(xsd::AudioUsage::AUDIO_USAGE_MEDIA);
+                            config.offloadInfo.bitRatePerSecond = 320;
+                            config.offloadInfo.durationMicroseconds = -1;
+                            config.offloadInfo.bitWidth = 16;
+                            config.offloadInfo.bufferSize = 256;  // arbitrary value
+                        }
+                        result.emplace_back(device, config, flags);
+                    }
+                }
+            }
+        }
+        return result;
+    }();
+    return parameters;
+}
+
+const std::vector<DeviceConfigParameter>& getInputDeviceConfigParameters() {
+    static std::vector<DeviceConfigParameter> parameters = [] {
+        std::vector<DeviceConfigParameter> result;
+        for (const auto& device : getDeviceParameters()) {
+            auto module =
+                    getCachedPolicyConfig().getModuleFromName(std::get<PARAM_DEVICE_NAME>(device));
+            for (const auto& mixPort : module->getFirstMixPorts()->getMixPort()) {
+                if (mixPort.getRole() != xsd::Role::sink) continue;  // not an input profile
+                std::vector<AudioInOutFlag> flags;
+                std::transform(mixPort.getFlags().begin(), mixPort.getFlags().end(), flags.begin(),
+                               [](auto flag) { return toString(flag); });
+                for (const auto& profile : mixPort.getProfile()) {
+                    auto configs =
+                            combineAudioConfig(profile.getChannelMasks(),
+                                               profile.getSamplingRates(), profile.getFormat());
+                    for (const auto& config : configs) {
+                        result.emplace_back(device, config, flags);
+                    }
+                }
+            }
+        }
+        return result;
+    }();
+    return parameters;
+}
diff --git a/audio/core/all-versions/vts/functional/7.0/PolicyConfig.h b/audio/core/all-versions/vts/functional/7.0/PolicyConfig.h
new file mode 100644
index 0000000..d790b34
--- /dev/null
+++ b/audio/core/all-versions/vts/functional/7.0/PolicyConfig.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+// Note: it is assumed that this file is included from AudioPrimaryHidlTest.h
+// and thus it doesn't have all '#include' and 'using' directives required
+// for a standalone compilation.
+
+namespace xsd {
+using Module = Modules::Module;
+}
+
+class PolicyConfig {
+  public:
+    explicit PolicyConfig(const std::string& configFileName)
+        : mConfigFileName{configFileName},
+          mFilePath{findExistingConfigurationFile(mConfigFileName)},
+          mConfig{xsd::read(mFilePath.c_str())} {
+        if (mConfig) {
+            mStatus = OK;
+            mPrimaryModule = getModuleFromName(DeviceManager::kPrimaryDevice);
+            for (const auto& module : mConfig->getFirstModules()->get_module()) {
+                auto attachedDevices = module.getFirstAttachedDevices()->getItem();
+                if (!attachedDevices.empty()) {
+                    mModulesWithDevicesNames.insert(module.getName());
+                }
+            }
+        }
+    }
+    status_t getStatus() const { return mStatus; }
+    std::string getError() const {
+        if (mFilePath.empty()) {
+            return std::string{"Could not find "} + mConfigFileName +
+                   " file in: " + testing::PrintToString(android::audio_get_configuration_paths());
+        } else {
+            return "Invalid config file: " + mFilePath;
+        }
+    }
+    const std::string& getFilePath() const { return mFilePath; }
+    const xsd::Module* getModuleFromName(const std::string& name) const {
+        if (mConfig) {
+            for (const auto& module : mConfig->getFirstModules()->get_module()) {
+                if (module.getName() == name) return &module;
+            }
+        }
+        return nullptr;
+    }
+    const xsd::Module* getPrimaryModule() const { return mPrimaryModule; }
+    const std::set<std::string>& getModulesWithDevicesNames() const {
+        return mModulesWithDevicesNames;
+    }
+    bool haveInputProfilesInModule(const std::string& name) const {
+        auto module = getModuleFromName(name);
+        for (const auto& mixPort : module->getFirstMixPorts()->getMixPort()) {
+            if (mixPort.getRole() == xsd::Role::sink) return true;
+        }
+        return false;
+    }
+
+  private:
+    static std::string findExistingConfigurationFile(const std::string& fileName) {
+        for (const auto& location : android::audio_get_configuration_paths()) {
+            std::string path = location + '/' + fileName;
+            if (access(path.c_str(), F_OK) == 0) {
+                return path;
+            }
+        }
+        return std::string{};
+    }
+
+    const std::string mConfigFileName;
+    const std::string mFilePath;
+    std::optional<xsd::AudioPolicyConfiguration> mConfig;
+    status_t mStatus = NO_INIT;
+    const xsd::Module* mPrimaryModule;
+    std::set<std::string> mModulesWithDevicesNames;
+};
diff --git a/audio/core/all-versions/vts/functional/Android.bp b/audio/core/all-versions/vts/functional/Android.bp
index 6ac9b20..c7bfe08 100644
--- a/audio/core/all-versions/vts/functional/Android.bp
+++ b/audio/core/all-versions/vts/functional/Android.bp
@@ -19,9 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     static_libs: [
         "android.hardware.audio.common.test.utility",
-        "libaudiofoundation",
-        "libaudiopolicycomponents",
-        "libmedia_helper",
         "libxml2",
     ],
     shared_libs: [
@@ -44,6 +41,9 @@
         "2.0/AudioPrimaryHidlHalTest.cpp",
     ],
     static_libs: [
+        "libaudiofoundation",
+        "libaudiopolicycomponents",
+        "libmedia_helper",
         "android.hardware.audio@2.0",
         "android.hardware.audio.common@2.0",
     ],
@@ -67,6 +67,9 @@
         "4.0/AudioPrimaryHidlHalTest.cpp",
     ],
     static_libs: [
+        "libaudiofoundation",
+        "libaudiopolicycomponents",
+        "libmedia_helper",
         "android.hardware.audio@4.0",
         "android.hardware.audio.common@4.0",
     ],
@@ -90,6 +93,9 @@
         "5.0/AudioPrimaryHidlHalTest.cpp",
     ],
     static_libs: [
+        "libaudiofoundation",
+        "libaudiopolicycomponents",
+        "libmedia_helper",
         "android.hardware.audio@5.0",
         "android.hardware.audio.common@5.0",
     ],
@@ -113,6 +119,9 @@
         "6.0/AudioPrimaryHidlHalTest.cpp",
     ],
     static_libs: [
+        "libaudiofoundation",
+        "libaudiopolicycomponents",
+        "libmedia_helper",
         "android.hardware.audio@6.0",
         "android.hardware.audio.common@6.0",
     ],
@@ -130,7 +139,6 @@
 }
 
 cc_test {
-    enabled: false,
     name: "VtsHalAudioV7_0TargetTest",
     defaults: ["VtsHalAudioTargetTest_defaults"],
     srcs: [
@@ -139,6 +147,7 @@
     static_libs: [
         "android.hardware.audio@7.0",
         "android.hardware.audio.common@7.0",
+        "android.hardware.audio.common@7.0-enums",
     ],
     cflags: [
         "-DMAJOR_VERSION=7",
diff --git a/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h b/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
index 01bdd69..0a9d5ee 100644
--- a/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
+++ b/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
@@ -42,8 +42,11 @@
 #include PATH(android/hardware/audio/FILE_VERSION/IPrimaryDevice.h)
 #include PATH(android/hardware/audio/FILE_VERSION/types.h)
 #include PATH(android/hardware/audio/common/FILE_VERSION/types.h)
+#if MAJOR_VERSION >= 7
+#include <audio_policy_configuration_V7_0-enums.h>
+#include <audio_policy_configuration_V7_0.h>
+#endif
 
-#include <Serializer.h>
 #include <fmq/EventFlag.h>
 #include <fmq/MessageQueue.h>
 #include <hidl/GtestPrinter.h>
@@ -63,14 +66,6 @@
 #include "4.0/AudioPrimaryHidlHalUtils.h"
 #endif
 
-using std::initializer_list;
-using std::list;
-using std::string;
-using std::to_string;
-using std::vector;
-
-using ::android::AudioPolicyConfig;
-using ::android::HwModule;
 using ::android::NO_INIT;
 using ::android::OK;
 using ::android::sp;
@@ -93,6 +88,12 @@
 using namespace ::android::hardware::audio::common::CPP_VERSION;
 using namespace ::android::hardware::audio::common::test::utility;
 using namespace ::android::hardware::audio::CPP_VERSION;
+#if MAJOR_VERSION >= 7
+// Make an alias for enumerations generated from the APM config XSD.
+namespace xsd {
+using namespace ::audio::policy::configuration::CPP_VERSION;
+}
+#endif
 
 // Typical accepted results from interface methods
 static auto okOrNotSupported = {Result::OK, Result::NOT_SUPPORTED};
@@ -103,8 +104,12 @@
 static auto invalidArgsOrNotSupported = {Result::INVALID_ARGUMENTS, Result::NOT_SUPPORTED};
 static auto invalidStateOrNotSupported = {Result::INVALID_STATE, Result::NOT_SUPPORTED};
 
-#define AUDIO_PRIMARY_HIDL_HAL_TEST
 #include "DeviceManager.h"
+#if MAJOR_VERSION <= 6
+#include "PolicyConfig.h"
+#elif MAJOR_VERSION >= 7
+#include "7.0/PolicyConfig.h"
+#endif
 
 class HidlTest : public ::testing::Test {
   public:
@@ -136,83 +141,16 @@
 ////////////////////////// Audio policy configuration ////////////////////////
 //////////////////////////////////////////////////////////////////////////////
 
-static constexpr char kConfigFileName[] = "audio_policy_configuration.xml";
-
 // Stringify the argument.
 #define QUOTE(x) #x
 #define STRINGIFY(x) QUOTE(x)
 
-struct PolicyConfigData {
-    android::HwModuleCollection hwModules;
-    android::DeviceVector availableOutputDevices;
-    android::DeviceVector availableInputDevices;
-    sp<android::DeviceDescriptor> defaultOutputDevice;
-};
-
-class PolicyConfig : private PolicyConfigData, public AudioPolicyConfig {
-   public:
-    PolicyConfig()
-        : AudioPolicyConfig(hwModules, availableOutputDevices, availableInputDevices,
-                            defaultOutputDevice) {
-        for (const auto& location : android::audio_get_configuration_paths()) {
-            std::string path = location + '/' + kConfigFileName;
-            if (access(path.c_str(), F_OK) == 0) {
-                mFilePath = path;
-                break;
-            }
-        }
-        mStatus = android::deserializeAudioPolicyFile(mFilePath.c_str(), this);
-        if (mStatus == OK) {
-            mPrimaryModule = getHwModules().getModuleFromName(DeviceManager::kPrimaryDevice);
-            // Available devices are not 'attached' to modules at this moment.
-            // Need to go over available devices and find their module.
-            for (const auto& device : availableOutputDevices) {
-                for (const auto& module : hwModules) {
-                    if (module->getDeclaredDevices().indexOf(device) >= 0) {
-                        mModulesWithDevicesNames.insert(module->getName());
-                        break;
-                    }
-                }
-            }
-            for (const auto& device : availableInputDevices) {
-                for (const auto& module : hwModules) {
-                    if (module->getDeclaredDevices().indexOf(device) >= 0) {
-                        mModulesWithDevicesNames.insert(module->getName());
-                        break;
-                    }
-                }
-            }
-        }
-    }
-    status_t getStatus() const { return mStatus; }
-    std::string getError() const {
-        if (mFilePath.empty()) {
-            return std::string{"Could not find "} + kConfigFileName +
-                   " file in: " + testing::PrintToString(android::audio_get_configuration_paths());
-        } else {
-            return "Invalid config file: " + mFilePath;
-        }
-    }
-    const std::string& getFilePath() const { return mFilePath; }
-    sp<const HwModule> getModuleFromName(const std::string& name) const {
-        return getHwModules().getModuleFromName(name.c_str());
-    }
-    sp<const HwModule> getPrimaryModule() const { return mPrimaryModule; }
-    const std::set<std::string>& getModulesWithDevicesNames() const {
-        return mModulesWithDevicesNames;
-    }
-
-   private:
-    status_t mStatus = NO_INIT;
-    std::string mFilePath;
-    sp<HwModule> mPrimaryModule = nullptr;
-    std::set<std::string> mModulesWithDevicesNames;
-};
+static constexpr char kConfigFileName[] = "audio_policy_configuration.xml";
 
 // Cached policy config after parsing for faster test startup
 const PolicyConfig& getCachedPolicyConfig() {
     static std::unique_ptr<PolicyConfig> policyConfig = [] {
-        auto config = std::make_unique<PolicyConfig>();
+        auto config = std::make_unique<PolicyConfig>(kConfigFileName);
         return config;
     }();
     return *policyConfig;
@@ -449,9 +387,10 @@
      *  The getter and/or the setter may return NOT_SUPPORTED if optionality == OPTIONAL.
      */
     template <Optionality optionality = REQUIRED, class IUTGetter, class Getter, class Setter>
-    void testAccessors(IUTGetter iutGetter, const string& propertyName,
-                       const Initial expectedInitial, list<Property> valuesToTest, Setter setter,
-                       Getter getter, const vector<Property>& invalidValues = {}) {
+    void testAccessors(IUTGetter iutGetter, const std::string& propertyName,
+                       const Initial expectedInitial, std::list<Property> valuesToTest,
+                       Setter setter, Getter getter,
+                       const std::vector<Property>& invalidValues = {}) {
         const auto expectedResults = {Result::OK,
                                       optionality == OPTIONAL ? Result::NOT_SUPPORTED : Result::OK};
 
@@ -495,9 +434,9 @@
         EXPECT_RESULT(expectedResults, ((this->*iutGetter)().get()->*setter)(initialValue));
     }
     template <Optionality optionality = REQUIRED, class Getter, class Setter>
-    void testAccessors(const string& propertyName, const Initial expectedInitial,
-                       list<Property> valuesToTest, Setter setter, Getter getter,
-                       const vector<Property>& invalidValues = {}) {
+    void testAccessors(const std::string& propertyName, const Initial expectedInitial,
+                       std::list<Property> valuesToTest, Setter setter, Getter getter,
+                       const std::vector<Property>& invalidValues = {}) {
         testAccessors<optionality>(&BaseTestClass::getDevice, propertyName, expectedInitial,
                                    valuesToTest, setter, getter, invalidValues);
     }
@@ -573,9 +512,13 @@
 // Nesting a tuple in another tuple allows to use GTest Combine function to generate
 // all combinations of devices and configs.
 enum { PARAM_DEVICE, PARAM_CONFIG, PARAM_FLAGS };
+#if MAJOR_VERSION <= 6
 enum { INDEX_INPUT, INDEX_OUTPUT };
 using DeviceConfigParameter =
         std::tuple<DeviceParameter, AudioConfig, std::variant<AudioInputFlag, AudioOutputFlag>>;
+#elif MAJOR_VERSION >= 7
+using DeviceConfigParameter = std::tuple<DeviceParameter, AudioConfig, std::vector<AudioInOutFlag>>;
+#endif
 
 #if MAJOR_VERSION >= 6
 const std::vector<DeviceConfigParameter>& getInputDeviceConfigParameters();
@@ -583,8 +526,8 @@
 #endif
 
 #if MAJOR_VERSION >= 4
-static string SanitizeStringForGTestName(const string& s) {
-    string result = s;
+static std::string SanitizeStringForGTestName(const std::string& s) {
+    std::string result = s;
     for (size_t i = 0; i < result.size(); i++) {
         // gtest test names must only contain alphanumeric characters
         if (!std::isalnum(result[i])) result[i] = '_';
@@ -598,43 +541,57 @@
  * As the only parameter changing are channel mask and sample rate,
  * only print those ones in the test name.
  */
-static string DeviceConfigParameterToString(
+static std::string DeviceConfigParameterToString(
         const testing::TestParamInfo<DeviceConfigParameter>& info) {
     const AudioConfig& config = std::get<PARAM_CONFIG>(info.param);
     const auto deviceName = DeviceParameterToString(::testing::TestParamInfo<DeviceParameter>{
             std::get<PARAM_DEVICE>(info.param), info.index});
-    return (deviceName.empty() ? "" : deviceName + "_") + to_string(info.index) + "__" +
-           to_string(config.sampleRateHz) + "_" +
-           // "MONO" is more clear than "FRONT_LEFT"
-           ((config.channelMask == mkEnumBitfield(AudioChannelMask::OUT_MONO) ||
-             config.channelMask == mkEnumBitfield(AudioChannelMask::IN_MONO))
-                    ? "MONO"
+    const auto devicePart =
+            (deviceName.empty() ? "" : deviceName + "_") + std::to_string(info.index);
+    // The types had changed a lot between versions 2, 4..6 and 7. Use separate
+    // code sections for easier understanding.
 #if MAJOR_VERSION == 2
-                    : ::testing::PrintToString(config.channelMask)
-#elif MAJOR_VERSION >= 4
-                    // In V4 and above the channel mask is a bitfield.
-                    // Printing its value using HIDL's toString for a bitfield emits a lot of extra
-                    // text due to overlapping constant values. Instead, we print the bitfield value
-                    // as if it was a single value + its hex representation
-                    : SanitizeStringForGTestName(
-                              ::testing::PrintToString(AudioChannelMask(config.channelMask)) + "_" +
-                              toHexString(config.channelMask))
+    const auto configPart =
+            std::to_string(config.sampleRateHz) + "_" +
+            // "MONO" is more clear than "FRONT_LEFT"
+            (config.channelMask == AudioChannelMask::OUT_MONO ||
+                             config.channelMask == AudioChannelMask::IN_MONO
+                     ? "MONO"
+                     : ::testing::PrintToString(config.channelMask)) +
+            "_" +
+            std::visit([](auto&& arg) -> std::string { return ::testing::PrintToString(arg); },
+                       std::get<PARAM_FLAGS>(info.param));
+#elif MAJOR_VERSION >= 4 && MAJOR_VERSION <= 6
+    const auto configPart =
+            std::to_string(config.sampleRateHz) + "_" +
+            // "MONO" is more clear than "FRONT_LEFT"
+            (config.channelMask == mkEnumBitfield(AudioChannelMask::OUT_MONO) ||
+                             config.channelMask == mkEnumBitfield(AudioChannelMask::IN_MONO)
+                     ? "MONO"
+                     // In V4 and above the channel mask is a bitfield.
+                     // Printing its value using HIDL's toString for a bitfield emits a lot of extra
+                     // text due to overlapping constant values. Instead, we print the bitfield
+                     // value as if it was a single value + its hex representation
+                     : SanitizeStringForGTestName(
+                               ::testing::PrintToString(AudioChannelMask(config.channelMask)) +
+                               "_" + toHexString(config.channelMask))) +
+            "_" +
+            SanitizeStringForGTestName(std::visit(
+                    [](auto&& arg) -> std::string {
+                        using T = std::decay_t<decltype(arg)>;
+                        // Need to use FQN of toString to avoid confusing the compiler
+                        return ::android::hardware::audio::common::CPP_VERSION::toString<T>(
+                                hidl_bitfield<T>(arg));
+                    },
+                    std::get<PARAM_FLAGS>(info.param)));
+#elif MAJOR_VERSION >= 7
+    const auto configPart =
+            std::to_string(config.base.sampleRateHz) + "_" +
+            // The channel masks and flags are vectors of strings, just need to sanitize them.
+            SanitizeStringForGTestName(::testing::PrintToString(config.base.channelMask)) + "_" +
+            SanitizeStringForGTestName(::testing::PrintToString(std::get<PARAM_FLAGS>(info.param)));
 #endif
-                    ) +
-           "_" +
-#if MAJOR_VERSION == 2
-           std::visit([](auto&& arg) -> std::string { return ::testing::PrintToString(arg); },
-                      std::get<PARAM_FLAGS>(info.param));
-#elif MAJOR_VERSION >= 4
-           SanitizeStringForGTestName(std::visit(
-                   [](auto&& arg) -> std::string {
-                       using T = std::decay_t<decltype(arg)>;
-                       // Need to use FQN of toString to avoid confusing the compiler
-                       return ::android::hardware::audio::common::CPP_VERSION::toString<T>(
-                               hidl_bitfield<T>(arg));
-                   },
-                   std::get<PARAM_FLAGS>(info.param)));
-#endif
+    return devicePart + "__" + configPart;
 }
 
 class AudioHidlTestWithDeviceConfigParameter
@@ -660,7 +617,7 @@
     AudioOutputFlag getOutputFlags() const {
         return std::get<INDEX_OUTPUT>(std::get<PARAM_FLAGS>(GetParam()));
     }
-#elif MAJOR_VERSION >= 4
+#elif MAJOR_VERSION >= 4 && MAJOR_VERSION <= 6
     hidl_bitfield<AudioInputFlag> getInputFlags() const {
         return hidl_bitfield<AudioInputFlag>(
                 std::get<INDEX_INPUT>(std::get<PARAM_FLAGS>(GetParam())));
@@ -669,10 +626,17 @@
         return hidl_bitfield<AudioOutputFlag>(
                 std::get<INDEX_OUTPUT>(std::get<PARAM_FLAGS>(GetParam())));
     }
+#elif MAJOR_VERSION >= 7
+    hidl_vec<AudioInOutFlag> getInputFlags() const { return std::get<PARAM_FLAGS>(GetParam()); }
+    hidl_vec<AudioInOutFlag> getOutputFlags() const { return std::get<PARAM_FLAGS>(GetParam()); }
 #endif
 };
 
+#if MAJOR_VERSION <= 6
+#define AUDIO_PRIMARY_HIDL_HAL_TEST
 #include "ConfigHelper.h"
+#undef AUDIO_PRIMARY_HIDL_HAL_TEST
+#endif
 
 //////////////////////////////////////////////////////////////////////////////
 ///////////////////////////// getInputBufferSize /////////////////////////////
@@ -839,7 +803,7 @@
               AudioConfig* suggestedConfigPtr) {
         // FIXME: Open a stream without an IOHandle
         //        This is not required to be accepted by hal implementations
-        AudioIoHandle ioHandle = (AudioIoHandle)AudioHandleConsts::AUDIO_IO_HANDLE_NONE;
+        AudioIoHandle ioHandle{};
         AudioConfig suggestedConfig{};
         bool retryWithSuggestedConfig = true;
         if (suggestedConfigPtr == nullptr) {
@@ -932,7 +896,11 @@
 class OutputStreamTest : public OpenStreamTest<IStreamOut> {
     void SetUp() override {
         ASSERT_NO_FATAL_FAILURE(OpenStreamTest::SetUp());  // setup base
+#if MAJOR_VERSION <= 6
         address.device = AudioDevice::OUT_DEFAULT;
+#elif MAJOR_VERSION >= 7
+        address.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_OUT_DEFAULT);
+#endif
         const AudioConfig& config = getConfig();
         auto flags = getOutputFlags();
         testOpen(
@@ -946,13 +914,19 @@
                 },
                 config);
     }
-#if MAJOR_VERSION >= 4
+#if MAJOR_VERSION >= 4 && MAJOR_VERSION <= 6
 
-   protected:
+  protected:
     const SourceMetadata initMetadata = {
         { { AudioUsage::MEDIA,
             AudioContentType::MUSIC,
             1 /* gain */ } }};
+#elif MAJOR_VERSION >= 7
+  protected:
+    const SourceMetadata initMetadata = {
+            { { toString(xsd::AudioUsage::AUDIO_USAGE_MEDIA),
+                toString(xsd::AudioContentType::AUDIO_CONTENT_TYPE_MUSIC),
+                1 /* gain */ } }};
 #endif
 };
 TEST_P(OutputStreamTest, OpenOutputStreamTest) {
@@ -995,7 +969,11 @@
 class InputStreamTest : public OpenStreamTest<IStreamIn> {
     void SetUp() override {
         ASSERT_NO_FATAL_FAILURE(OpenStreamTest::SetUp());  // setup base
+#if MAJOR_VERSION <= 6
         address.device = AudioDevice::IN_DEFAULT;
+#elif MAJOR_VERSION <= 7
+        address.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_IN_DEFAULT);
+#endif
         const AudioConfig& config = getConfig();
         auto flags = getInputFlags();
         testOpen(
@@ -1009,8 +987,11 @@
    protected:
 #if MAJOR_VERSION == 2
     const AudioSource initMetadata = AudioSource::DEFAULT;
-#elif MAJOR_VERSION >= 4
-    const SinkMetadata initMetadata = {{{.source = AudioSource::DEFAULT, .gain = 1}}};
+#elif MAJOR_VERSION >= 4 && MAJOR_VERSION <= 6
+     const SinkMetadata initMetadata = {{ {.source = AudioSource::DEFAULT, .gain = 1 } }};
+#elif MAJOR_VERSION >= 7
+     const SinkMetadata initMetadata = {
+             {{.source = toString(xsd::AudioSource::AUDIO_SOURCE_DEFAULT), .gain = 1}}};
 #endif
 };
 
@@ -1067,6 +1048,7 @@
 TEST_IO_STREAM(GetFrameCount, "Check that getting stream frame count does not crash the HAL.",
                ASSERT_TRUE(stream->getFrameCount().isOk()))
 
+#if MAJOR_VERSION <= 6
 TEST_IO_STREAM(GetSampleRate, "Check that the stream sample rate == the one it was opened with",
                ASSERT_EQ(audioConfig.sampleRateHz, extract(stream->getSampleRate())))
 
@@ -1075,6 +1057,7 @@
 
 TEST_IO_STREAM(GetFormat, "Check that the stream format == the one it was opened with",
                ASSERT_EQ(audioConfig.format, extract(stream->getFormat())))
+#endif
 
 // TODO: for now only check that the framesize is not incoherent
 TEST_IO_STREAM(GetFrameSize, "Check that the stream frame size == the one it was opened with",
@@ -1084,7 +1067,7 @@
                ASSERT_GE(extract(stream->getBufferSize()), extract(stream->getFrameSize())));
 
 template <class Property, class CapabilityGetter>
-static void testCapabilityGetter(const string& name, IStream* stream,
+static void testCapabilityGetter(const std::string& name, IStream* stream,
                                  CapabilityGetter capabilityGetter,
                                  Return<Property> (IStream::*getter)(),
                                  Return<Result> (IStream::*setter)(Property),
@@ -1120,6 +1103,7 @@
     }
 }
 
+#if MAJOR_VERSION <= 6
 TEST_IO_STREAM(SupportedSampleRate, "Check that the stream sample rate is declared as supported",
                testCapabilityGetter("getSupportedSampleRate", stream.get(),
                                     &GetSupported::sampleRates, &IStream::getSampleRate,
@@ -1137,19 +1121,71 @@
 TEST_IO_STREAM(SupportedFormat, "Check that the stream format is declared as supported",
                testCapabilityGetter("getSupportedFormat", stream.get(), &GetSupported::formats,
                                     &IStream::getFormat, &IStream::setFormat))
+#else
+static void testGetSupportedProfiles(IStream* stream) {
+    Result res;
+    hidl_vec<AudioProfile> profiles;
+    auto ret = stream->getSupportedProfiles(returnIn(res, profiles));
+    EXPECT_TRUE(ret.isOk());
+    if (res == Result::OK) {
+        EXPECT_GT(profiles.size(), 0);
+    } else {
+        EXPECT_EQ(Result::NOT_SUPPORTED, res);
+    }
+}
+
+TEST_IO_STREAM(GetSupportedProfiles, "Try to call optional method GetSupportedProfiles",
+               testGetSupportedProfiles(stream.get()))
+
+static void testSetAudioProperties(IStream* stream) {
+    Result res;
+    hidl_vec<AudioProfile> profiles;
+    auto ret = stream->getSupportedProfiles(returnIn(res, profiles));
+    EXPECT_TRUE(ret.isOk());
+    if (res == Result::NOT_SUPPORTED) {
+        GTEST_SKIP() << "Retrieving supported profiles is not implemented";
+    }
+    for (const auto& profile : profiles) {
+        for (const auto& sampleRate : profile.sampleRates) {
+            for (const auto& channelMask : profile.channelMasks) {
+                AudioConfigBase config{.format = profile.format,
+                                       .sampleRateHz = sampleRate,
+                                       .channelMask = {{channelMask}}};
+                auto ret = stream->setAudioProperties(config);
+                EXPECT_TRUE(ret.isOk());
+                EXPECT_EQ(Result::OK, ret) << config.format << "; " << config.sampleRateHz << "; "
+                                           << toString(config.channelMask);
+            }
+        }
+    }
+}
+
+TEST_IO_STREAM(SetAudioProperties, "Call setAudioProperties for all supported profiles",
+               testSetAudioProperties(stream.get()))
+#endif
 
 static void testGetAudioProperties(IStream* stream, AudioConfig expectedConfig) {
+#if MAJOR_VERSION <= 6
     uint32_t sampleRateHz;
     auto mask = mkEnumBitfield<AudioChannelMask>({});
     AudioFormat format;
 
-    stream->getAudioProperties(returnIn(sampleRateHz, mask, format));
+    auto ret = stream->getAudioProperties(returnIn(sampleRateHz, mask, format));
+    EXPECT_TRUE(ret.isOk());
 
     // FIXME: the qcom hal it does not currently negotiate the sampleRate &
     // channel mask
     EXPECT_EQ(expectedConfig.sampleRateHz, sampleRateHz);
     EXPECT_EQ(expectedConfig.channelMask, mask);
     EXPECT_EQ(expectedConfig.format, format);
+#elif MAJOR_VERSION >= 7
+    AudioConfigBase actualConfig{};
+    auto ret = stream->getAudioProperties(returnIn(actualConfig));
+    EXPECT_TRUE(ret.isOk());
+    EXPECT_EQ(expectedConfig.base.sampleRateHz, actualConfig.sampleRateHz);
+    EXPECT_EQ(expectedConfig.base.channelMask, actualConfig.channelMask);
+    EXPECT_EQ(expectedConfig.base.format, actualConfig.format);
+#endif
 }
 
 TEST_IO_STREAM(GetAudioProperties,
@@ -1160,7 +1196,7 @@
                ASSERT_RESULT(okOrNotSupportedOrInvalidArgs, stream->setHwAvSync(666)))
 
 static void checkGetNoParameter(IStream* stream, hidl_vec<hidl_string> keys,
-                                initializer_list<Result> expectedResults) {
+                                std::initializer_list<Result> expectedResults) {
     hidl_vec<ParameterValue> parameters;
     Result res;
     ASSERT_OK(Parameters::get(stream, keys, returnIn(res, parameters)));
@@ -1271,7 +1307,11 @@
         return;
     }
     ASSERT_OK(res);
+#if MAJOR_VERSION <= 6
     ASSERT_EQ(AudioSource::DEFAULT, source);
+#elif MAJOR_VERSION >= 7
+    ASSERT_EQ(xsd::AudioSource::AUDIO_SOURCE_DEFAULT, xsd::stringToAudioSource(source));
+#endif
 }
 
 static void testUnitaryGain(std::function<Return<Result>(float)> setGain) {
@@ -1286,7 +1326,7 @@
 }
 
 static void testOptionalUnitaryGain(std::function<Return<Result>(float)> setGain,
-                                    string debugName) {
+                                    std::string debugName) {
     auto result = setGain(1);
     ASSERT_IS_OK(result);
     if (result == Result::NOT_SUPPORTED) {
@@ -1306,7 +1346,7 @@
     Result res;
     // Ignore output parameters as the call should fail
     ASSERT_OK(stream->prepareForReading(frameSize, framesCount,
-                                        [&res](auto r, auto&, auto&, auto&, auto&) { res = r; }));
+                                        [&res](auto r, auto&, auto&, auto&, auto) { res = r; }));
     EXPECT_RESULT(Result::INVALID_ARGUMENTS, res);
 }
 
@@ -1371,7 +1411,7 @@
     Result res;
     // Ignore output parameters as the call should fail
     ASSERT_OK(stream->prepareForWriting(frameSize, framesCount,
-                                        [&res](auto r, auto&, auto&, auto&, auto&) { res = r; }));
+                                        [&res](auto r, auto&, auto&, auto&, auto) { res = r; }));
     EXPECT_RESULT(Result::INVALID_ARGUMENTS, res);
 }
 
diff --git a/audio/core/all-versions/vts/functional/ConfigHelper.h b/audio/core/all-versions/vts/functional/ConfigHelper.h
index 8ef2b43..1a1dbea 100644
--- a/audio/core/all-versions/vts/functional/ConfigHelper.h
+++ b/audio/core/all-versions/vts/functional/ConfigHelper.h
@@ -14,6 +14,8 @@
  * limitations under the License.
  */
 
+#pragma once
+
 // Code in this file uses 'getCachedPolicyConfig'
 #ifndef AUDIO_PRIMARY_HIDL_HAL_TEST
 #error Must be included from AudioPrimaryHidlTest.h
@@ -46,32 +48,32 @@
     }
 
     // Cache result ?
-    static const vector<AudioConfig> getRequiredSupportPlaybackAudioConfig() {
+    static const std::vector<AudioConfig> getRequiredSupportPlaybackAudioConfig() {
         return combineAudioConfig({AudioChannelMask::OUT_STEREO, AudioChannelMask::OUT_MONO},
                                   {8000, 11025, 16000, 22050, 32000, 44100},
                                   {AudioFormat::PCM_16_BIT});
     }
 
-    static const vector<AudioConfig> getRecommendedSupportPlaybackAudioConfig() {
+    static const std::vector<AudioConfig> getRecommendedSupportPlaybackAudioConfig() {
         return combineAudioConfig({AudioChannelMask::OUT_STEREO, AudioChannelMask::OUT_MONO},
                                   {24000, 48000}, {AudioFormat::PCM_16_BIT});
     }
 
-    static const vector<AudioConfig> getRequiredSupportCaptureAudioConfig() {
+    static const std::vector<AudioConfig> getRequiredSupportCaptureAudioConfig() {
         if (!primaryHasMic()) return {};
         return combineAudioConfig({AudioChannelMask::IN_MONO}, {8000, 11025, 16000, 44100},
                                   {AudioFormat::PCM_16_BIT});
     }
-    static const vector<AudioConfig> getRecommendedSupportCaptureAudioConfig() {
+    static const std::vector<AudioConfig> getRecommendedSupportCaptureAudioConfig() {
         if (!primaryHasMic()) return {};
         return combineAudioConfig({AudioChannelMask::IN_STEREO}, {22050, 48000},
                                   {AudioFormat::PCM_16_BIT});
     }
 
-    static vector<AudioConfig> combineAudioConfig(vector<audio_channel_mask_t> channelMasks,
-                                                  vector<uint32_t> sampleRates,
-                                                  audio_format_t format) {
-        vector<AudioConfig> configs;
+    static std::vector<AudioConfig> combineAudioConfig(
+            std::vector<audio_channel_mask_t> channelMasks, std::vector<uint32_t> sampleRates,
+            audio_format_t format) {
+        std::vector<AudioConfig> configs;
         configs.reserve(channelMasks.size() * sampleRates.size());
         for (auto channelMask : channelMasks) {
             for (auto sampleRate : sampleRates) {
@@ -86,10 +88,10 @@
         return configs;
     }
 
-    static vector<AudioConfig> combineAudioConfig(vector<AudioChannelMask> channelMasks,
-                                                  vector<uint32_t> sampleRates,
-                                                  vector<AudioFormat> formats) {
-        vector<AudioConfig> configs;
+    static std::vector<AudioConfig> combineAudioConfig(std::vector<AudioChannelMask> channelMasks,
+                                                       std::vector<uint32_t> sampleRates,
+                                                       std::vector<AudioFormat> formats) {
+        std::vector<AudioConfig> configs;
         configs.reserve(channelMasks.size() * sampleRates.size() * formats.size());
         for (auto channelMask : channelMasks) {
             for (auto sampleRate : sampleRates) {
diff --git a/audio/core/all-versions/vts/functional/DeviceManager.h b/audio/core/all-versions/vts/functional/DeviceManager.h
index 0c0727f..6efed79 100644
--- a/audio/core/all-versions/vts/functional/DeviceManager.h
+++ b/audio/core/all-versions/vts/functional/DeviceManager.h
@@ -14,10 +14,11 @@
  * limitations under the License.
  */
 
-// Code in this file uses 'environment'
-#ifndef AUDIO_PRIMARY_HIDL_HAL_TEST
-#error Must be included from AudioPrimaryHidlTest.h
-#endif
+#pragma once
+
+// Note: it is assumed that this file is included from AudioPrimaryHidlTest.h
+// and thus it doesn't have all '#include' and 'using' directives required
+// for a standalone compilation.
 
 template <class Derived, class Key, class Interface>
 class InterfaceManager {
diff --git a/audio/core/all-versions/vts/functional/PolicyConfig.h b/audio/core/all-versions/vts/functional/PolicyConfig.h
new file mode 100644
index 0000000..c9e0c0d
--- /dev/null
+++ b/audio/core/all-versions/vts/functional/PolicyConfig.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+// Note: it is assumed that this file is included from AudioPrimaryHidlTest.h
+// and thus it doesn't have all '#include' and 'using' directives required
+// for a standalone compilation.
+
+#include <Serializer.h>
+
+struct PolicyConfigData {
+    android::HwModuleCollection hwModules;
+    android::DeviceVector availableOutputDevices;
+    android::DeviceVector availableInputDevices;
+    sp<android::DeviceDescriptor> defaultOutputDevice;
+};
+
+class PolicyConfig : private PolicyConfigData, public android::AudioPolicyConfig {
+  public:
+    explicit PolicyConfig(const std::string& configFileName)
+        : android::AudioPolicyConfig(hwModules, availableOutputDevices, availableInputDevices,
+                                     defaultOutputDevice),
+          mConfigFileName{configFileName} {
+        for (const auto& location : android::audio_get_configuration_paths()) {
+            std::string path = location + '/' + mConfigFileName;
+            if (access(path.c_str(), F_OK) == 0) {
+                mFilePath = path;
+                break;
+            }
+        }
+        mStatus = android::deserializeAudioPolicyFile(mFilePath.c_str(), this);
+        if (mStatus == OK) {
+            mPrimaryModule = getModuleFromName(DeviceManager::kPrimaryDevice);
+            // Available devices are not 'attached' to modules at this moment.
+            // Need to go over available devices and find their module.
+            for (const auto& device : availableOutputDevices) {
+                for (const auto& module : hwModules) {
+                    if (module->getDeclaredDevices().indexOf(device) >= 0) {
+                        mModulesWithDevicesNames.insert(module->getName());
+                        break;
+                    }
+                }
+            }
+            for (const auto& device : availableInputDevices) {
+                for (const auto& module : hwModules) {
+                    if (module->getDeclaredDevices().indexOf(device) >= 0) {
+                        mModulesWithDevicesNames.insert(module->getName());
+                        break;
+                    }
+                }
+            }
+        }
+    }
+    status_t getStatus() const { return mStatus; }
+    std::string getError() const {
+        if (mFilePath.empty()) {
+            return std::string{"Could not find "} + mConfigFileName +
+                   " file in: " + testing::PrintToString(android::audio_get_configuration_paths());
+        } else {
+            return "Invalid config file: " + mFilePath;
+        }
+    }
+    const std::string& getFilePath() const { return mFilePath; }
+    sp<const android::HwModule> getModuleFromName(const std::string& name) const {
+        return getHwModules().getModuleFromName(name.c_str());
+    }
+    sp<const android::HwModule> getPrimaryModule() const { return mPrimaryModule; }
+    const std::set<std::string>& getModulesWithDevicesNames() const {
+        return mModulesWithDevicesNames;
+    }
+    bool haveInputProfilesInModule(const std::string& name) const {
+        auto module = getModuleFromName(name);
+        return module && !module->getInputProfiles().empty();
+    }
+
+  private:
+    const std::string mConfigFileName;
+    status_t mStatus = NO_INIT;
+    std::string mFilePath;
+    sp<const android::HwModule> mPrimaryModule = nullptr;
+    std::set<std::string> mModulesWithDevicesNames;
+};
diff --git a/audio/effect/7.0/IEffect.hal b/audio/effect/7.0/IEffect.hal
index 5b176dc..aa94f6d 100644
--- a/audio/effect/7.0/IEffect.hal
+++ b/audio/effect/7.0/IEffect.hal
@@ -56,7 +56,6 @@
      *
      * @return retval operation completion status.
      */
-    @callflow(next={"prepareForProcessing"})
     enable() generates (Result retval);
 
     /**
@@ -64,7 +63,6 @@
      *
      * @return retval operation completion status.
      */
-    @callflow(next={"close"})
     disable() generates (Result retval);
 
     /**
@@ -78,7 +76,7 @@
      * @param device output device specification.
      * @return retval operation completion status.
      */
-    setDevice(bitfield<AudioDevice> device) generates (Result retval);
+    setDevice(DeviceAddress device) generates (Result retval);
 
     /**
      * Set and get volume. Used by audio framework to delegate volume control to
@@ -147,7 +145,7 @@
      * @param device input device specification.
      * @return retval operation completion status.
      */
-    setInputDevice(bitfield<AudioDevice> device) generates (Result retval);
+    setInputDevice(DeviceAddress device) generates (Result retval);
 
     /**
      * Read audio parameters configurations for input and output buffers.
@@ -251,7 +249,6 @@
      *                                  the queue.
      * @return statusMQ a message queue used for passing status from the effect.
      */
-    @callflow(next={"setProcessBuffers"})
     prepareForProcessing() generates (Result retval, fmq_sync<Result> statusMQ);
 
     /**
@@ -416,6 +413,5 @@
      * @return retval OK in case the success.
      *                INVALID_STATE if the effect was already closed.
      */
-    @exit
     close() generates (Result retval);
 };
diff --git a/audio/effect/7.0/IVirtualizerEffect.hal b/audio/effect/7.0/IVirtualizerEffect.hal
index 0e6ff54..141b4e6 100644
--- a/audio/effect/7.0/IVirtualizerEffect.hal
+++ b/audio/effect/7.0/IVirtualizerEffect.hal
@@ -48,7 +48,7 @@
 
     struct SpeakerAngle {
         /** Speaker channel mask */
-        bitfield<AudioChannelMask> mask;
+        vec<AudioChannelMask> mask;
         // all angles are expressed in degrees and
         // are relative to the listener.
         int16_t azimuth; // 0 is the direction the listener faces
@@ -61,17 +61,17 @@
      * Retrieves virtual speaker angles for the given channel mask on the
      * specified device.
      */
-    getVirtualSpeakerAngles(bitfield<AudioChannelMask> mask, AudioDevice device)
+    getVirtualSpeakerAngles(vec<AudioChannelMask> mask, DeviceAddress device)
             generates (Result retval, vec<SpeakerAngle> speakerAngles);
 
     /**
      * Forces the virtualizer effect for the given output device.
      */
-    forceVirtualizationMode(AudioDevice device) generates (Result retval);
+    forceVirtualizationMode(DeviceAddress device) generates (Result retval);
 
     /**
      * Returns audio device reflecting the current virtualization mode,
-     * AUDIO_DEVICE_NONE when not virtualizing.
+     * Device type can be empty when not virtualizing.
      */
-    getVirtualizationMode() generates (Result retval, AudioDevice device);
+    getVirtualizationMode() generates (Result retval, DeviceAddress device);
 };
diff --git a/audio/effect/7.0/types.hal b/audio/effect/7.0/types.hal
index 7f5a382..fe4ee51 100644
--- a/audio/effect/7.0/types.hal
+++ b/audio/effect/7.0/types.hal
@@ -257,7 +257,7 @@
 struct EffectBufferConfig {
     AudioBuffer buffer;
     uint32_t samplingRateHz;
-    bitfield<AudioChannelMask> channels;
+    AudioChannelMask channels;
     AudioFormat format;
     EffectBufferAccess accessMode;
     bitfield<EffectConfigParameters> mask;
@@ -276,8 +276,8 @@
 };
 
 struct EffectAuxChannelsConfig {
-    bitfield<AudioChannelMask> mainChannels;  // channel mask for main channels
-    bitfield<AudioChannelMask> auxChannels;   // channel mask for auxiliary channels
+    vec<AudioChannelMask> mainChannels;  // channel mask for main channels
+    vec<AudioChannelMask> auxChannels;   // channel mask for auxiliary channels
 };
 
 struct EffectOffloadParameter {
diff --git a/audio/effect/all-versions/vts/functional/Android.bp b/audio/effect/all-versions/vts/functional/Android.bp
index 7cdb18f..f4a7283 100644
--- a/audio/effect/all-versions/vts/functional/Android.bp
+++ b/audio/effect/all-versions/vts/functional/Android.bp
@@ -118,7 +118,6 @@
 }
 
 cc_test {
-    enabled: false,
     name: "VtsHalAudioEffectV7_0TargetTest",
     defaults: ["VtsHalAudioEffectTargetTest_default"],
     // Use test_config for vts suite.
@@ -126,6 +125,7 @@
     test_config: "VtsHalAudioEffectV7_0TargetTest.xml",
     static_libs: [
         "android.hardware.audio.common@7.0",
+        "android.hardware.audio.common@7.0-enums",
         "android.hardware.audio.effect@7.0",
     ],
     data: [
diff --git a/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp b/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp
index 4787c09..b64f105 100644
--- a/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp
+++ b/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp
@@ -16,7 +16,9 @@
 
 #define LOG_TAG "AudioEffectHidlHalTest"
 #include <android-base/logging.h>
+#if MAJOR_VERSION <= 6
 #include <system/audio.h>
+#endif
 
 #include PATH(android/hardware/audio/effect/FILE_VERSION/IEffect.h)
 #include PATH(android/hardware/audio/effect/FILE_VERSION/IEffectsFactory.h)
@@ -25,6 +27,10 @@
 #include PATH(android/hardware/audio/effect/FILE_VERSION/types.h)
 #include <android/hidl/allocator/1.0/IAllocator.h>
 #include <android/hidl/memory/1.0/IMemory.h>
+#if MAJOR_VERSION >= 7
+#include <audio_policy_configuration_V7_0-enums.h>
+#include <audio_policy_configuration_V7_0.h>
+#endif
 
 #include <common/all-versions/VersionUtils.h>
 
@@ -45,6 +51,12 @@
 using ::android::hidl::memory::V1_0::IMemory;
 using namespace ::android::hardware::audio::common::CPP_VERSION;
 using namespace ::android::hardware::audio::effect::CPP_VERSION;
+#if MAJOR_VERSION >= 7
+// Make an alias for enumerations generated from the APM config XSD.
+namespace xsd {
+using namespace ::audio::policy::configuration::CPP_VERSION;
+}
+#endif
 
 #ifndef ARRAY_SIZE
 #define ARRAY_SIZE(a) (sizeof(a) / sizeof(*(a)))
@@ -171,7 +183,7 @@
         effectsFactory = IEffectsFactory::getService(std::get<PARAM_FACTORY_NAME>(GetParam()));
         ASSERT_NE(nullptr, effectsFactory.get());
 
-        findAndCreateEffect(getEffectType());
+        ASSERT_NO_FATAL_FAILURE(findAndCreateEffect(getEffectType()));
         ASSERT_NE(nullptr, effect.get());
 
         Return<Result> ret = effect->init();
@@ -201,7 +213,7 @@
 
 void AudioEffectHidlTest::findAndCreateEffect(const Uuid& type) {
     Uuid effectUuid;
-    findEffectInstance(type, &effectUuid);
+    ASSERT_NO_FATAL_FAILURE(findEffectInstance(type, &effectUuid));
     Return<void> ret = effectsFactory->createEffect(
             effectUuid, 1 /*session*/, 1 /*ioHandle*/,
 #if MAJOR_VERSION >= 6
@@ -244,10 +256,16 @@
     });
     ASSERT_TRUE(ret.isOk());
     ASSERT_EQ(Result::OK, retval);
+#if MAJOR_VERSION <= 6
     ASSERT_TRUE(audio_channel_mask_is_valid(
         static_cast<audio_channel_mask_t>(currentConfig.outputCfg.channels)));
     *channelCount = audio_channel_count_from_out_mask(
         static_cast<audio_channel_mask_t>(currentConfig.outputCfg.channels));
+#else
+    *channelCount =
+            audio::policy::configuration::V7_0::getChannelCount(currentConfig.outputCfg.channels);
+    ASSERT_NE(*channelCount, 0);
+#endif
 }
 
 TEST_P(AudioEffectHidlTest, Close) {
@@ -391,7 +409,12 @@
 
 TEST_P(AudioEffectHidlTest, SetDevice) {
     description("Verify that SetDevice works for an output chain effect");
+#if MAJOR_VERSION <= 6
     Return<Result> ret = effect->setDevice(mkEnumBitfield(AudioDevice::OUT_SPEAKER));
+#else
+    DeviceAddress device{.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_OUT_SPEAKER)};
+    Return<Result> ret = effect->setDevice(device);
+#endif
     EXPECT_TRUE(ret.isOk());
     EXPECT_EQ(Result::OK, ret);
 }
@@ -441,22 +464,28 @@
 
 TEST_P(AudioEffectHidlTest, SetInputDevice) {
     description("Verify that SetInputDevice does not crash");
+#if MAJOR_VERSION <= 6
     Return<Result> ret = effect->setInputDevice(mkEnumBitfield(AudioDevice::IN_BUILTIN_MIC));
+#else
+    DeviceAddress device{.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_IN_BUILTIN_MIC)};
+    Return<Result> ret = effect->setInputDevice(device);
+#endif
     EXPECT_TRUE(ret.isOk());
 }
 
 TEST_P(AudioEffectHidlTest, SetAudioSource) {
     description("Verify that SetAudioSource does not crash");
+#if MAJOR_VERSION <= 6
     Return<Result> ret = effect->setAudioSource(AudioSource::MIC);
+#else
+    Return<Result> ret = effect->setAudioSource(toString(xsd::AudioSource::AUDIO_SOURCE_MIC));
+#endif
     EXPECT_TRUE(ret.isOk());
 }
 
 TEST_P(AudioEffectHidlTest, Offload) {
     description("Verify that calling Offload method does not crash");
-    EffectOffloadParameter offloadParam;
-    offloadParam.isOffload = false;
-    offloadParam.ioHandle = static_cast<int>(AudioHandleConsts::AUDIO_IO_HANDLE_NONE);
-    Return<Result> ret = effect->offload(offloadParam);
+    Return<Result> ret = effect->offload(EffectOffloadParameter{});
     EXPECT_TRUE(ret.isOk());
 }
 
diff --git a/bluetooth/1.0/default/h4_protocol.cc b/bluetooth/1.0/default/h4_protocol.cc
index 8c24f76..43abbe4 100644
--- a/bluetooth/1.0/default/h4_protocol.cc
+++ b/bluetooth/1.0/default/h4_protocol.cc
@@ -90,6 +90,7 @@
     hci_packet_type_ = static_cast<HciPacketType>(buffer[0]);
     if (hci_packet_type_ != HCI_PACKET_TYPE_ACL_DATA &&
         hci_packet_type_ != HCI_PACKET_TYPE_SCO_DATA &&
+        hci_packet_type_ != HCI_PACKET_TYPE_ISO_DATA &&
         hci_packet_type_ != HCI_PACKET_TYPE_EVENT) {
       LOG_ALWAYS_FATAL("%s: Unimplemented packet type %d", __func__,
                        static_cast<int>(hci_packet_type_));
diff --git a/bluetooth/1.0/default/hci_internals.h b/bluetooth/1.0/default/hci_internals.h
index 24e944f..6f7ff90 100644
--- a/bluetooth/1.0/default/hci_internals.h
+++ b/bluetooth/1.0/default/hci_internals.h
@@ -44,6 +44,10 @@
 const size_t HCI_EVENT_PREAMBLE_SIZE = 2;
 const size_t HCI_LENGTH_OFFSET_EVT = 1;
 
+// 2 bytes for handle and flags, 2 byte for data length (Volume 4, Part E, 5.4.5)
+const size_t HCI_ISO_PREAMBLE_SIZE = 4;
+const size_t HCI_LENGTH_OFFSET_ISO = 2;
+
 const size_t HCI_PREAMBLE_SIZE_MAX = HCI_ACL_PREAMBLE_SIZE;
 
 // Event codes (Volume 2, Part E, 7.7.14)
diff --git a/bluetooth/1.0/default/hci_packetizer.cc b/bluetooth/1.0/default/hci_packetizer.cc
index 7cb3a11..78ce61d 100644
--- a/bluetooth/1.0/default/hci_packetizer.cc
+++ b/bluetooth/1.0/default/hci_packetizer.cc
@@ -26,17 +26,27 @@
 
 namespace {
 
-const size_t preamble_size_for_type[] = {
-    0, HCI_COMMAND_PREAMBLE_SIZE, HCI_ACL_PREAMBLE_SIZE, HCI_SCO_PREAMBLE_SIZE,
-    HCI_EVENT_PREAMBLE_SIZE};
-const size_t packet_length_offset_for_type[] = {
-    0, HCI_LENGTH_OFFSET_CMD, HCI_LENGTH_OFFSET_ACL, HCI_LENGTH_OFFSET_SCO,
-    HCI_LENGTH_OFFSET_EVT};
+const size_t preamble_size_for_type[] = {0,
+                                         HCI_COMMAND_PREAMBLE_SIZE,
+                                         HCI_ACL_PREAMBLE_SIZE,
+                                         HCI_SCO_PREAMBLE_SIZE,
+                                         HCI_EVENT_PREAMBLE_SIZE,
+                                         HCI_ISO_PREAMBLE_SIZE};
+const size_t packet_length_offset_for_type[] = {0,
+                                                HCI_LENGTH_OFFSET_CMD,
+                                                HCI_LENGTH_OFFSET_ACL,
+                                                HCI_LENGTH_OFFSET_SCO,
+                                                HCI_LENGTH_OFFSET_EVT,
+                                                HCI_LENGTH_OFFSET_ISO};
 
 size_t HciGetPacketLengthForType(HciPacketType type, const uint8_t* preamble) {
   size_t offset = packet_length_offset_for_type[type];
-  if (type != HCI_PACKET_TYPE_ACL_DATA) return preamble[offset];
-  return (((preamble[offset + 1]) << 8) | preamble[offset]);
+  if (type == HCI_PACKET_TYPE_ACL_DATA) {
+    return (((preamble[offset + 1]) << 8) | preamble[offset]);
+  } else if (type == HCI_PACKET_TYPE_ISO_DATA) {
+    return ((((preamble[offset + 1]) & 0x3f) << 8) | preamble[offset]);
+  }
+  return preamble[offset];
 }
 
 }  // namespace
diff --git a/bluetooth/1.0/default/test/h4_protocol_unittest.cc b/bluetooth/1.0/default/test/h4_protocol_unittest.cc
index 283243d..174861c 100644
--- a/bluetooth/1.0/default/test/h4_protocol_unittest.cc
+++ b/bluetooth/1.0/default/test/h4_protocol_unittest.cc
@@ -190,8 +190,10 @@
 
   void WriteAndExpectInboundIsoData(char* payload) {
     // h4 type[1] + handle[2] + size[1]
-    char preamble[4] = {HCI_PACKET_TYPE_ISO_DATA, 20, 17, 0};
-    preamble[3] = strlen(payload) & 0xFF;
+    char preamble[5] = {HCI_PACKET_TYPE_ISO_DATA, 19, 92, 0, 0};
+    int length = strlen(payload);
+    preamble[3] = length & 0xFF;
+    preamble[4] = (length >> 8) & 0x3F;
 
     ALOGD("%s writing", __func__);
     TEMP_FAILURE_RETRY(write(fake_uart_, preamble, sizeof(preamble)));
diff --git a/bluetooth/audio/2.1/default/BluetoothAudioProvider.cpp b/bluetooth/audio/2.1/default/BluetoothAudioProvider.cpp
index 0f349a4..092038b 100644
--- a/bluetooth/audio/2.1/default/BluetoothAudioProvider.cpp
+++ b/bluetooth/audio/2.1/default/BluetoothAudioProvider.cpp
@@ -55,12 +55,17 @@
     const V2_0::AudioConfiguration& audioConfig, startSession_cb _hidl_cb) {
   AudioConfiguration audioConfig_2_1;
 
-  audioConfig_2_1.codecConfig() = audioConfig.codecConfig();
-  audioConfig_2_1.pcmConfig() = {
-      .sampleRate = static_cast<SampleRate>(audioConfig.pcmConfig().sampleRate),
-      .channelMode = audioConfig.pcmConfig().channelMode,
-      .bitsPerSample = audioConfig.pcmConfig().bitsPerSample,
-      .dataIntervalUs = 0};
+  if (audioConfig.getDiscriminator() ==
+      V2_0::AudioConfiguration::hidl_discriminator::pcmConfig) {
+    audioConfig_2_1.pcmConfig() = {
+        .sampleRate =
+            static_cast<SampleRate>(audioConfig.pcmConfig().sampleRate),
+        .channelMode = audioConfig.pcmConfig().channelMode,
+        .bitsPerSample = audioConfig.pcmConfig().bitsPerSample,
+        .dataIntervalUs = 0};
+  } else {
+    audioConfig_2_1.codecConfig() = audioConfig.codecConfig();
+  }
 
   return startSession_2_1(hostIf, audioConfig_2_1, _hidl_cb);
 }
diff --git a/bluetooth/audio/2.1/vts/functional/VtsHalBluetoothAudioV2_1TargetTest.cpp b/bluetooth/audio/2.1/vts/functional/VtsHalBluetoothAudioV2_1TargetTest.cpp
index c0ec907..37d1281 100644
--- a/bluetooth/audio/2.1/vts/functional/VtsHalBluetoothAudioV2_1TargetTest.cpp
+++ b/bluetooth/audio/2.1/vts/functional/VtsHalBluetoothAudioV2_1TargetTest.cpp
@@ -1043,6 +1043,7 @@
     } else {
       EXPECT_EQ(status, BluetoothAudioStatus::UNSUPPORTED_CODEC_CONFIGURATION);
       EXPECT_FALSE(dataMQ.isHandleValid());
+      tempDataMQ.reset(nullptr);
     }
   };
   android::hardware::bluetooth::audio::V2_1::AudioConfiguration audio_config =
@@ -1064,6 +1065,8 @@
           ASSERT_TRUE(hidl_retval.isOk());
           if (is_codec_config_valid) {
             EXPECT_TRUE(tempDataMQ != nullptr && tempDataMQ->isValid());
+          } else {
+            EXPECT_TRUE(tempDataMQ == nullptr);
           }
           EXPECT_TRUE(audio_provider_2_1_->endSession().isOk());
         }  // uint32_t (data interval in microseconds)
@@ -1132,6 +1135,7 @@
     } else {
       EXPECT_EQ(status, BluetoothAudioStatus::UNSUPPORTED_CODEC_CONFIGURATION);
       EXPECT_FALSE(dataMQ.isHandleValid());
+      tempDataMQ.reset(nullptr);
     }
   };
   android::hardware::bluetooth::audio::V2_1::AudioConfiguration audio_config =
diff --git a/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp b/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
index 44eccd3..2099dc0 100644
--- a/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
+++ b/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
@@ -1209,7 +1209,12 @@
             return notify;
         }
 
-        if (physicalCameraMetadata.size() != request->expectedPhysicalResults.size()) {
+        // Physical device results are only expected in the last/final
+        // partial result notification.
+        bool expectPhysicalResults = !(request->usePartialResult &&
+                (results.partialResult < request->numPartialResults));
+        if (expectPhysicalResults &&
+                (physicalCameraMetadata.size() != request->expectedPhysicalResults.size())) {
             ALOGE("%s: Frame %d: Returned physical metadata count %zu "
                     "must be equal to expected count %zu", __func__, frameNumber,
                     physicalCameraMetadata.size(), request->expectedPhysicalResults.size());
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
index ea8d6ad..6c8cb58 100644
--- a/compatibility_matrices/compatibility_matrix.current.xml
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -299,6 +299,14 @@
         </interface>
     </hal>
     <hal format="aidl" optional="true">
+        <name>android.hardware.keymint</name>
+        <interface>
+            <name>IKeyMintDevice</name>
+            <instance>default</instance>
+            <instance>strongbox</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" optional="true">
         <name>android.hardware.light</name>
         <interface>
             <name>ILights</name>
diff --git a/current.txt b/current.txt
index ec1a788..cbf965f 100644
--- a/current.txt
+++ b/current.txt
@@ -767,7 +767,12 @@
 98592d193a717066facf91428426e5abe211e3bd718bc372e29fb944ddbe6e7c android.hardware.wifi.supplicant@1.3::types
 
 # ABI preserving changes to HALs during Android S
+2c331a9605f3a08d9c1e0a36169ca57758bc43c11a78ef3f3730509885e52c15 android.hardware.graphics.composer@2.4::IComposerClient
 3da3ce039247872d95c6bd48621dbfdfa1c2d2a91a90f257862f87ee2bc46300 android.hardware.health@2.1::types
+9679f27a42f75781c8993ef163ed92808a1928de186639834841d0b8e326e63d android.hardware.gatekeeper@1.0::IGatekeeper
+40456eb90ea88b62d18ad3fbf1da8917981cd55ac04ce69c8e058d49ff5beff4 android.hardware.keymaster@3.0::IKeymasterDevice
+6017b4f2481feb0fffceae81c62bc372c898998b2d8fe69fbd39859d3a315e5e android.hardware.keymaster@4.0::IKeymasterDevice
+dabe23dde7c9e3ad65c61def7392f186d7efe7f4216f9b6f9cf0863745b1a9f4 android.hardware.keymaster@4.1::IKeymasterDevice
 cd84ab19c590e0e73dd2307b591a3093ee18147ef95e6d5418644463a6620076 android.hardware.neuralnetworks@1.2::IDevice
 9625e85f56515ad2cf87b6a1847906db669f746ea4ab02cd3d4ca25abc9b0109 android.hardware.neuralnetworks@1.2::types
 9e758e208d14f7256e0885d6d8ad0b61121b21d8c313864f981727ae55bffd16 android.hardware.neuralnetworks@1.3::types
diff --git a/gatekeeper/1.0/Android.bp b/gatekeeper/1.0/Android.bp
index 28fd5b6..f5cb8e4 100644
--- a/gatekeeper/1.0/Android.bp
+++ b/gatekeeper/1.0/Android.bp
@@ -10,5 +10,5 @@
     interfaces: [
         "android.hidl.base@1.0",
     ],
-    gen_java: true,
+    gen_java: false,
 }
diff --git a/gatekeeper/1.0/IGatekeeper.hal b/gatekeeper/1.0/IGatekeeper.hal
index 59dd7d1..84e8e06 100644
--- a/gatekeeper/1.0/IGatekeeper.hal
+++ b/gatekeeper/1.0/IGatekeeper.hal
@@ -15,6 +15,7 @@
  */
 package android.hardware.gatekeeper@1.0;
 
+@SensitiveData
 interface IGatekeeper {
 
 /**
diff --git a/graphics/composer/2.1/vts/functional/Android.bp b/graphics/composer/2.1/vts/functional/Android.bp
index e137afb..9e703d8 100644
--- a/graphics/composer/2.1/vts/functional/Android.bp
+++ b/graphics/composer/2.1/vts/functional/Android.bp
@@ -21,6 +21,7 @@
 
     // TODO(b/64437680): Assume these libs are always available on the device.
     shared_libs: [
+        "libbase",
         "libfmq",
         "libsync",
         "android.hardware.graphics.mapper@2.0",
diff --git a/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp b/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp
index b92279d..2604be6 100644
--- a/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp
+++ b/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp
@@ -17,6 +17,7 @@
 #define LOG_TAG "graphics_composer_hidl_hal_test"
 
 #include <android-base/logging.h>
+#include <android-base/properties.h>
 #include <composer-vts/2.1/ComposerVts.h>
 #include <composer-vts/2.1/GraphicsComposerCallback.h>
 #include <composer-vts/2.1/TestCommandReader.h>
@@ -1100,3 +1101,15 @@
 }  // namespace graphics
 }  // namespace hardware
 }  // namespace android
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+
+    using namespace std::chrono_literals;
+    if (!android::base::WaitForProperty("init.svc.surfaceflinger", "stopped", 10s)) {
+        ALOGE("Failed to stop init.svc.surfaceflinger");
+        return -1;
+    }
+
+    return RUN_ALL_TESTS();
+}
diff --git a/graphics/composer/2.2/vts/functional/Android.bp b/graphics/composer/2.2/vts/functional/Android.bp
index d80845f..f07a10b 100644
--- a/graphics/composer/2.2/vts/functional/Android.bp
+++ b/graphics/composer/2.2/vts/functional/Android.bp
@@ -27,6 +27,7 @@
         "libEGL",
         "libGLESv1_CM",
         "libGLESv2",
+        "libbase",
         "libfmq",
         "libgui",
         "libhidlbase",
diff --git a/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2TargetTest.cpp b/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2TargetTest.cpp
index 95a0f69..f4c0382 100644
--- a/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2TargetTest.cpp
+++ b/graphics/composer/2.2/vts/functional/VtsHalGraphicsComposerV2_2TargetTest.cpp
@@ -17,6 +17,7 @@
 #define LOG_TAG "graphics_composer_hidl_hal_test@2.2"
 
 #include <android-base/logging.h>
+#include <android-base/properties.h>
 #include <android/hardware/graphics/mapper/2.0/IMapper.h>
 #include <composer-vts/2.1/GraphicsComposerCallback.h>
 #include <composer-vts/2.1/TestCommandReader.h>
@@ -698,3 +699,15 @@
 }  // namespace graphics
 }  // namespace hardware
 }  // namespace android
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+
+    using namespace std::chrono_literals;
+    if (!android::base::WaitForProperty("init.svc.surfaceflinger", "stopped", 10s)) {
+        ALOGE("Failed to stop init.svc.surfaceflinger");
+        return -1;
+    }
+
+    return RUN_ALL_TESTS();
+}
\ No newline at end of file
diff --git a/graphics/composer/2.3/vts/functional/Android.bp b/graphics/composer/2.3/vts/functional/Android.bp
index 1ab6b3b..1cbb60e 100644
--- a/graphics/composer/2.3/vts/functional/Android.bp
+++ b/graphics/composer/2.3/vts/functional/Android.bp
@@ -21,6 +21,7 @@
 
     // TODO(b/64437680): Assume these libs are always available on the device.
     shared_libs: [
+        "libbase",
         "libfmq",
         "libhidlbase",
         "libsync",
diff --git a/graphics/composer/2.3/vts/functional/VtsHalGraphicsComposerV2_3TargetTest.cpp b/graphics/composer/2.3/vts/functional/VtsHalGraphicsComposerV2_3TargetTest.cpp
index 94766af..63af900 100644
--- a/graphics/composer/2.3/vts/functional/VtsHalGraphicsComposerV2_3TargetTest.cpp
+++ b/graphics/composer/2.3/vts/functional/VtsHalGraphicsComposerV2_3TargetTest.cpp
@@ -19,6 +19,7 @@
 #include <algorithm>
 
 #include <android-base/logging.h>
+#include <android-base/properties.h>
 #include <android/hardware/graphics/mapper/2.0/IMapper.h>
 #include <composer-command-buffer/2.3/ComposerCommandBuffer.h>
 #include <composer-vts/2.1/GraphicsComposerCallback.h>
@@ -628,3 +629,15 @@
 }  // namespace graphics
 }  // namespace hardware
 }  // namespace android
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+
+    using namespace std::chrono_literals;
+    if (!android::base::WaitForProperty("init.svc.surfaceflinger", "stopped", 10s)) {
+        ALOGE("Failed to stop init.svc.surfaceflinger");
+        return -1;
+    }
+
+    return RUN_ALL_TESTS();
+}
\ No newline at end of file
diff --git a/graphics/composer/2.4/IComposerClient.hal b/graphics/composer/2.4/IComposerClient.hal
index 9e3cf0e..1a59bbd 100644
--- a/graphics/composer/2.4/IComposerClient.hal
+++ b/graphics/composer/2.4/IComposerClient.hal
@@ -34,7 +34,9 @@
         /**
          * The configuration group ID (as int32_t) this config is associated to.
          * Switching between configurations within the same group may be done seamlessly
-         * in some conditions via setActiveConfigWithConstraints.
+         * in some conditions via setActiveConfigWithConstraints. Configurations which
+         * share the same config group are similar in all attributes except for the
+         * vsync period.
          */
         CONFIG_GROUP = 7,
     };
diff --git a/graphics/composer/2.4/vts/functional/Android.bp b/graphics/composer/2.4/vts/functional/Android.bp
index d0209b7..cab549c 100644
--- a/graphics/composer/2.4/vts/functional/Android.bp
+++ b/graphics/composer/2.4/vts/functional/Android.bp
@@ -21,6 +21,7 @@
 
     // TODO(b/64437680): Assume these libs are always available on the device.
     shared_libs: [
+        "libbase",
         "libfmq",
         "libsync",
         "android.hardware.graphics.mapper@2.0",
diff --git a/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp b/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp
index f0de4f7..a7d1c6c 100644
--- a/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp
+++ b/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp
@@ -21,6 +21,7 @@
 #include <thread>
 
 #include <android-base/logging.h>
+#include <android-base/properties.h>
 #include <android/hardware/graphics/mapper/2.0/IMapper.h>
 #include <composer-command-buffer/2.4/ComposerCommandBuffer.h>
 #include <composer-vts/2.4/ComposerVts.h>
@@ -683,3 +684,15 @@
 }  // namespace graphics
 }  // namespace hardware
 }  // namespace android
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+
+    using namespace std::chrono_literals;
+    if (!android::base::WaitForProperty("init.svc.surfaceflinger", "stopped", 10s)) {
+        ALOGE("Failed to stop init.svc.surfaceflinger");
+        return -1;
+    }
+
+    return RUN_ALL_TESTS();
+}
\ No newline at end of file
diff --git a/identity/aidl/android/hardware/identity/IIdentityCredential.aidl b/identity/aidl/android/hardware/identity/IIdentityCredential.aidl
index 730b601..702334d 100644
--- a/identity/aidl/android/hardware/identity/IIdentityCredential.aidl
+++ b/identity/aidl/android/hardware/identity/IIdentityCredential.aidl
@@ -55,7 +55,7 @@
      * This method may only be called once per instance. If called more than once, STATUS_FAILED
      * will be returned.
      *
-     * @return the unencrypted key-pair in PKCS#8 format.
+     * @return the private key, in DER format as specified in RFC 5915.
      */
     byte[] createEphemeralKeyPair();
 
@@ -88,10 +88,10 @@
      * The setRequestedNamespaces() and setVerificationToken() methods will be called before
      * this method is called.
      *
-     * This method be called after createEphemeralKeyPair(), setReaderEphemeralPublicKey(),
-     * createAuthChallenge() and before startRetrieveEntry(). This method call is followed by
-     * multiple calls of startRetrieveEntryValue(), retrieveEntryValue(), and finally
-     * finishRetrieval().
+     * This method is called after createEphemeralKeyPair(), setReaderEphemeralPublicKey(),
+     * createAuthChallenge() (note that those calls are optional) and before startRetrieveEntry().
+     * This method call is followed by multiple calls of startRetrieveEntryValue(),
+     * retrieveEntryValue(), and finally finishRetrieval().
      *
      * It is permissible to perform data retrievals multiple times using the same instance (e.g.
      * startRetrieval(), then multiple calls of startRetrieveEntryValue(), retrieveEntryValue(),
@@ -343,12 +343,13 @@
      *
      *  - signature: must be set to ECDSA.
      *
-     *  - subject: CN shall be set to "Android Identity Credential Authentication Key".
+     *  - subject: CN shall be set to "Android Identity Credential Authentication Key". (fixed
+     *    value: same on all certs)
      *
-     *  - issuer: shall be set to "credentialStoreName (credentialStoreAuthorName)" using the
-     *    values returned in HardwareInformation.
+     *  - issuer: CN shall be set to "Android Identity Credential Key". (fixed value:
+     *    same on all certs)
      *
-     *  - validity: should be from current time and one year in the future.
+     *  - validity: should be from current time and one year in the future (365 days).
      *
      *  - subjectPublicKeyInfo: must contain attested public key.
      *
diff --git a/identity/aidl/android/hardware/identity/IWritableIdentityCredential.aidl b/identity/aidl/android/hardware/identity/IWritableIdentityCredential.aidl
index 297fd1d..c48cb66 100644
--- a/identity/aidl/android/hardware/identity/IWritableIdentityCredential.aidl
+++ b/identity/aidl/android/hardware/identity/IWritableIdentityCredential.aidl
@@ -37,12 +37,12 @@
      *
      *  - signature: must be set to ECDSA.
      *
-     *  - subject: CN shall be set to "Android Identity Credential Key".
+     *  - subject: CN shall be set to "Android Identity Credential Key". (fixed value:
+     *    same on all certs)
      *
-     *  - issuer: shall be set to "credentialStoreName (credentialStoreAuthorName)" using the
-     *    values returned in HardwareInformation.
+     *  - issuer: Same as the subject field of the batch attestation key.
      *
-     *  - validity: should be from current time and expire at the same time as the
+     *  - validity: Should be set to current time and expire at the same time as the
      *    attestation batch certificate used.
      *
      *  - subjectPublicKeyInfo: must contain attested public key.
@@ -55,19 +55,14 @@
      *
      *  - The attestationSecurityLevel field must be set to either Software (0),
      *    TrustedEnvironment (1), or StrongBox (2) depending on how attestation is
-     *    implemented. Only the default AOSP implementation of this HAL may use
-     *    value 0 (additionally, this implementation must not be used on production
-     *    devices).
+     *    implemented.
      *
-     *  - The keymasterVersion field in the attestation extension must be set to (10*major + minor)
-     *    where major and minor are the Identity Credential interface major and minor versions.
-     *    Specifically for this version of the interface (1.0) this value is 10.
+     *  - The keymasterVersion field in the attestation extension must be set to the.
+     *    same value as used for Android Keystore keys.
      *
      *  - The keymasterSecurityLevel field in the attestation extension must be set to
      *    either Software (0), TrustedEnvironment (1), or StrongBox (2) depending on how
-     *    the Trusted Application backing the HAL implementation is implemented. Only
-     *    the default AOSP implementation of this HAL may use value 0 (additionally, this
-     *    implementation must not be used on production devices)
+     *    the Trusted Application backing the HAL implementation is implemented.
      *
      *  - The attestationChallenge field must be set to the passed-in challenge.
      *
@@ -81,7 +76,8 @@
      *
      *    - Tag::IDENTITY_CREDENTIAL_KEY which indicates that the key is an Identity
      *      Credential key (which can only sign/MAC very specific messages) and not an Android
-     *      Keystore key (which can be used to sign/MAC anything).
+     *      Keystore key (which can be used to sign/MAC anything). This must not be set
+     *      for test credentials.
      *
      *    - Tag::PURPOSE must be set to SIGN
      *
@@ -95,10 +91,13 @@
      *
      *    - Tag::EC_CURVE must be set to P_256
      *
-     * Additional authorizations may be needed in the softwareEnforced and teeEnforced
-     * fields - the above is not an exhaustive list. Specifically, authorizations containing
-     * information about the root of trust, OS version, verified boot state, and so on should
-     * be included.
+     *    - Tag::ROOT_OF_TRUST must be set
+     *
+     *    - Tag::OS_VERSION and Tag::OS_PATCHLEVEL must be set
+     *
+     * Additional authorizations may be appear in the softwareEnforced and teeEnforced
+     * fields. For example if the device has a boot or vendor partitions, then BOOT_PATCHLEVEL
+     * and VENDOR_PATCHLEVEL should be set.
      *
      * Since the chain is required to be generated using Keymaster Attestation, the returned
      * certificate chain has the following properties:
@@ -112,8 +111,8 @@
      * As with any user of attestation, the Issuing Authority (as a relying party) wishing
      * to issue a credential to a device using these APIs, must carefully examine the
      * returned certificate chain for all of the above (and more). In particular, the Issuing
-     * Authority should check the root of trust, verified boot state, patch level,
-     * application id, etc.
+     * Authority should check the root of trust (which include verified boot state), patch level,
+     * attestation application id, etc.
      *
      * This all depends on the needs of the Issuing Authority and the kind of credential but
      * in general an Issuing Authority should never issue a credential to a device without
diff --git a/identity/aidl/default/IdentityCredential.cpp b/identity/aidl/default/IdentityCredential.cpp
index 87d9a93..dfcd4f5 100644
--- a/identity/aidl/default/IdentityCredential.cpp
+++ b/identity/aidl/default/IdentityCredential.cpp
@@ -272,6 +272,7 @@
         const HardwareAuthToken& authToken, const vector<uint8_t>& itemsRequest,
         const vector<uint8_t>& signingKeyBlob, const vector<uint8_t>& sessionTranscript,
         const vector<uint8_t>& readerSignature, const vector<int32_t>& requestCounts) {
+    std::unique_ptr<cppbor::Item> sessionTranscriptItem;
     if (sessionTranscript.size() > 0) {
         auto [item, _, message] = cppbor::parse(sessionTranscript);
         if (item == nullptr) {
@@ -279,7 +280,7 @@
                     IIdentityCredentialStore::STATUS_INVALID_DATA,
                     "SessionTranscript contains invalid CBOR"));
         }
-        sessionTranscriptItem_ = std::move(item);
+        sessionTranscriptItem = std::move(item);
     }
     if (numStartRetrievalCalls_ > 0) {
         if (sessionTranscript_ != sessionTranscript) {
@@ -319,7 +320,7 @@
         vector<uint8_t> encodedReaderAuthentication =
                 cppbor::Array()
                         .add("ReaderAuthentication")
-                        .add(sessionTranscriptItem_->clone())
+                        .add(std::move(sessionTranscriptItem))
                         .add(cppbor::Semantic(24, itemsRequestBytes))
                         .encode();
         vector<uint8_t> encodedReaderAuthenticationBytes =
@@ -776,13 +777,6 @@
     optional<vector<uint8_t>> mac;
     if (signingKeyBlob_.size() > 0 && sessionTranscript_.size() > 0 &&
         readerPublicKey_.size() > 0) {
-        cppbor::Array array;
-        array.add("DeviceAuthentication");
-        array.add(sessionTranscriptItem_->clone());
-        array.add(docType_);
-        array.add(cppbor::Semantic(24, encodedDeviceNameSpaces));
-        vector<uint8_t> deviceAuthenticationBytes = cppbor::Semantic(24, array.encode()).encode();
-
         vector<uint8_t> docTypeAsBlob(docType_.begin(), docType_.end());
         optional<vector<uint8_t>> signingKey =
                 support::decryptAes128Gcm(storageKey_, signingKeyBlob_, docTypeAsBlob);
@@ -792,31 +786,15 @@
                     "Error decrypting signingKeyBlob"));
         }
 
-        optional<vector<uint8_t>> sharedSecret =
-                support::ecdh(readerPublicKey_, signingKey.value());
-        if (!sharedSecret) {
-            return ndk::ScopedAStatus(AStatus_fromServiceSpecificErrorWithMessage(
-                    IIdentityCredentialStore::STATUS_FAILED, "Error doing ECDH"));
-        }
-
-        // Mix-in SessionTranscriptBytes
         vector<uint8_t> sessionTranscriptBytes = cppbor::Semantic(24, sessionTranscript_).encode();
-        vector<uint8_t> sharedSecretWithSessionTranscriptBytes = sharedSecret.value();
-        std::copy(sessionTranscriptBytes.begin(), sessionTranscriptBytes.end(),
-                  std::back_inserter(sharedSecretWithSessionTranscriptBytes));
-
-        vector<uint8_t> salt = {0x00};
-        vector<uint8_t> info = {};
-        optional<vector<uint8_t>> derivedKey =
-                support::hkdf(sharedSecretWithSessionTranscriptBytes, salt, info, 32);
-        if (!derivedKey) {
+        optional<vector<uint8_t>> eMacKey =
+                support::calcEMacKey(signingKey.value(), readerPublicKey_, sessionTranscriptBytes);
+        if (!eMacKey) {
             return ndk::ScopedAStatus(AStatus_fromServiceSpecificErrorWithMessage(
-                    IIdentityCredentialStore::STATUS_FAILED,
-                    "Error deriving key from shared secret"));
+                    IIdentityCredentialStore::STATUS_FAILED, "Error calculating EMacKey"));
         }
-
-        mac = support::coseMac0(derivedKey.value(), {},      // payload
-                                deviceAuthenticationBytes);  // detached content
+        mac = support::calcMac(sessionTranscript_, docType_, encodedDeviceNameSpaces,
+                               eMacKey.value());
         if (!mac) {
             return ndk::ScopedAStatus(AStatus_fromServiceSpecificErrorWithMessage(
                     IIdentityCredentialStore::STATUS_FAILED, "Error MACing data"));
@@ -830,9 +808,9 @@
 
 ndk::ScopedAStatus IdentityCredential::generateSigningKeyPair(
         vector<uint8_t>* outSigningKeyBlob, Certificate* outSigningKeyCertificate) {
-    string serialDecimal = "0";  // TODO: set serial to something unique
-    string issuer = "Android Open Source Project";
-    string subject = "Android IdentityCredential Reference Implementation";
+    string serialDecimal = "1";
+    string issuer = "Android Identity Credential Key";
+    string subject = "Android Identity Credential Authentication Key";
     time_t validityNotBefore = time(nullptr);
     time_t validityNotAfter = validityNotBefore + 365 * 24 * 3600;
 
diff --git a/identity/aidl/default/IdentityCredential.h b/identity/aidl/default/IdentityCredential.h
index a82531d..a8a6409 100644
--- a/identity/aidl/default/IdentityCredential.h
+++ b/identity/aidl/default/IdentityCredential.h
@@ -103,7 +103,6 @@
     map<int32_t, int> profileIdToAccessCheckResult_;
     vector<uint8_t> signingKeyBlob_;
     vector<uint8_t> sessionTranscript_;
-    std::unique_ptr<cppbor::Item> sessionTranscriptItem_;
     vector<uint8_t> itemsRequest_;
     vector<int32_t> requestCountsRemaining_;
     map<string, set<string>> requestedNameSpacesAndNames_;
diff --git a/identity/aidl/default/WritableIdentityCredential.cpp b/identity/aidl/default/WritableIdentityCredential.cpp
index fea289b..141b4de 100644
--- a/identity/aidl/default/WritableIdentityCredential.cpp
+++ b/identity/aidl/default/WritableIdentityCredential.cpp
@@ -74,7 +74,7 @@
     vector<uint8_t> appId(attestationApplicationId.begin(), attestationApplicationId.end());
 
     optional<std::pair<vector<uint8_t>, vector<vector<uint8_t>>>> keyAttestationPair =
-            support::createEcKeyPairAndAttestation(challenge, appId);
+            support::createEcKeyPairAndAttestation(challenge, appId, testCredential_);
     if (!keyAttestationPair) {
         LOG(ERROR) << "Error creating credentialKey and attestation";
         return ndk::ScopedAStatus(AStatus_fromServiceSpecificErrorWithMessage(
diff --git a/identity/aidl/vts/Android.bp b/identity/aidl/vts/Android.bp
index c1f44e7..03966de 100644
--- a/identity/aidl/vts/Android.bp
+++ b/identity/aidl/vts/Android.bp
@@ -9,7 +9,6 @@
         "VtsIWritableIdentityCredentialTests.cpp",
         "VtsIdentityTestUtils.cpp",
         "VtsAttestationTests.cpp",
-        "VtsAttestationParserSupport.cpp",
         "UserAuthTests.cpp",
         "ReaderAuthTests.cpp",
     ],
@@ -20,13 +19,14 @@
     static_libs: [
         "libcppbor",
         "libkeymaster_portable",
-        "libsoft_attestation_cert",
         "libpuresoftkeymasterdevice",
         "android.hardware.keymaster@4.0",
         "android.hardware.identity-support-lib",
         "android.hardware.identity-cpp",
         "android.hardware.keymaster-cpp",
         "android.hardware.keymaster-ndk_platform",
+        "libkeymaster4support",
+        "libkeymaster4_1support",
     ],
     test_suites: [
         "general-tests",
diff --git a/identity/aidl/vts/VtsAttestationParserSupport.cpp b/identity/aidl/vts/VtsAttestationParserSupport.cpp
deleted file mode 100644
index 71fe733..0000000
--- a/identity/aidl/vts/VtsAttestationParserSupport.cpp
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright 2019, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "VtsAttestationParserSupport.h"
-
-#include <aidl/Gtest.h>
-#include <map>
-
-namespace android::hardware::identity::test_utils {
-
-using std::endl;
-using std::map;
-using std::optional;
-using std::string;
-using std::vector;
-
-using ::android::sp;
-using ::android::String16;
-using ::android::binder::Status;
-
-using ::keymaster::ASN1_OBJECT_Ptr;
-using ::keymaster::AuthorizationSet;
-using ::keymaster::EVP_PKEY_Ptr;
-using ::keymaster::kAttestionRecordOid;
-using ::keymaster::TAG_ATTESTATION_APPLICATION_ID;
-using ::keymaster::TAG_IDENTITY_CREDENTIAL_KEY;
-using ::keymaster::TAG_INCLUDE_UNIQUE_ID;
-using ::keymaster::TypedTag;
-using ::keymaster::X509_Ptr;
-
-using support::certificateChainSplit;
-
-optional<keymaster_cert_chain_t> AttestationCertificateParser::certificateChainToKeymasterChain(
-        const vector<Certificate>& certificates) {
-    if (certificates.size() <= 0) {
-        return {};
-    }
-
-    keymaster_cert_chain_t kCert;
-    kCert.entry_count = certificates.size();
-    kCert.entries = (keymaster_blob_t*)malloc(sizeof(keymaster_blob_t) * kCert.entry_count);
-
-    int index = 0;
-    for (const auto& c : certificates) {
-        kCert.entries[index].data_length = c.encodedCertificate.size();
-        uint8_t* data = (uint8_t*)malloc(c.encodedCertificate.size());
-
-        memcpy(data, c.encodedCertificate.data(), c.encodedCertificate.size());
-        kCert.entries[index].data = (const uint8_t*)data;
-        index++;
-    }
-
-    return kCert;
-}
-
-bool AttestationCertificateParser::parse() {
-    optional<keymaster_cert_chain_t> cert_chain = certificateChainToKeymasterChain(origCertChain_);
-    if (!cert_chain) {
-        return false;
-    }
-
-    if (cert_chain.value().entry_count < 3) {
-        return false;
-    }
-
-    if (!verifyChain(cert_chain.value())) {
-        return false;
-    }
-
-    if (!verifyAttestationRecord(cert_chain.value().entries[0])) {
-        return false;
-    }
-
-    keymaster_free_cert_chain(&cert_chain.value());
-    return true;
-}
-
-ASN1_OCTET_STRING* AttestationCertificateParser::getAttestationRecord(X509* certificate) {
-    ASN1_OBJECT_Ptr oid(OBJ_txt2obj(kAttestionRecordOid, 1));
-    if (!oid.get()) return nullptr;
-
-    int location = X509_get_ext_by_OBJ(certificate, oid.get(), -1);
-    if (location == -1) return nullptr;
-
-    X509_EXTENSION* attest_rec_ext = X509_get_ext(certificate, location);
-    if (!attest_rec_ext) return nullptr;
-
-    ASN1_OCTET_STRING* attest_rec = X509_EXTENSION_get_data(attest_rec_ext);
-    return attest_rec;
-}
-
-X509* AttestationCertificateParser::parseCertBlob(const keymaster_blob_t& blob) {
-    const uint8_t* p = blob.data;
-    return d2i_X509(nullptr, &p, blob.data_length);
-}
-
-bool AttestationCertificateParser::verifyAttestationRecord(
-        const keymaster_blob_t& attestation_cert) {
-    X509_Ptr cert(parseCertBlob(attestation_cert));
-    if (!cert.get()) {
-        return false;
-    }
-
-    ASN1_OCTET_STRING* attest_rec = getAttestationRecord(cert.get());
-    if (!attest_rec) {
-        return false;
-    }
-
-    keymaster_blob_t att_unique_id = {};
-    keymaster_blob_t att_challenge;
-    keymaster_error_t ret = parse_attestation_record(
-            attest_rec->data, attest_rec->length, &att_attestation_version_,
-            &att_attestation_security_level_, &att_keymaster_version_,
-            &att_keymaster_security_level_, &att_challenge, &att_sw_enforced_, &att_hw_enforced_,
-            &att_unique_id);
-    if (ret) {
-        return false;
-    }
-
-    att_challenge_.assign(att_challenge.data, att_challenge.data + att_challenge.data_length);
-    return true;
-}
-
-uint32_t AttestationCertificateParser::getKeymasterVersion() {
-    return att_keymaster_version_;
-}
-
-uint32_t AttestationCertificateParser::getAttestationVersion() {
-    return att_attestation_version_;
-}
-
-vector<uint8_t> AttestationCertificateParser::getAttestationChallenge() {
-    return att_challenge_;
-}
-
-keymaster_security_level_t AttestationCertificateParser::getKeymasterSecurityLevel() {
-    return att_keymaster_security_level_;
-}
-
-keymaster_security_level_t AttestationCertificateParser::getAttestationSecurityLevel() {
-    return att_attestation_security_level_;
-}
-
-// Verify the Attestation certificates are correctly chained.
-bool AttestationCertificateParser::verifyChain(const keymaster_cert_chain_t& chain) {
-    for (size_t i = 0; i < chain.entry_count - 1; ++i) {
-        keymaster_blob_t& key_cert_blob = chain.entries[i];
-        keymaster_blob_t& signing_cert_blob = chain.entries[i + 1];
-
-        X509_Ptr key_cert(parseCertBlob(key_cert_blob));
-        X509_Ptr signing_cert(parseCertBlob(signing_cert_blob));
-        if (!key_cert.get() || !signing_cert.get()) {
-            return false;
-        }
-
-        EVP_PKEY_Ptr signing_pubkey(X509_get_pubkey(signing_cert.get()));
-        if (!signing_pubkey.get()) return false;
-
-        if (X509_verify(key_cert.get(), signing_pubkey.get()) != 1) {
-            return false;
-        }
-
-        if (i + 1 == chain.entry_count - 1) {
-            // Last entry is self-signed.
-            if (X509_verify(signing_cert.get(), signing_pubkey.get()) != 1) {
-                return false;
-            }
-        }
-    }
-
-    return true;
-}
-
-}  // namespace android::hardware::identity::test_utils
diff --git a/identity/aidl/vts/VtsAttestationParserSupport.h b/identity/aidl/vts/VtsAttestationParserSupport.h
deleted file mode 100644
index 7c7e1b6..0000000
--- a/identity/aidl/vts/VtsAttestationParserSupport.h
+++ /dev/null
@@ -1,122 +0,0 @@
-
-/*
- * Copyright 2019, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef VTS_ATTESTATION_PARSER_SUPPORT_H
-#define VTS_ATTESTATION_PARSER_SUPPORT_H
-
-//#include <aidl/Gtest.h>
-#include <android/hardware/identity/IIdentityCredentialStore.h>
-#include <android/hardware/identity/support/IdentityCredentialSupport.h>
-#include <android/hardware/keymaster/4.0/types.h>
-#include <hardware/keymaster_defs.h>
-#include <keymaster/android_keymaster_utils.h>
-#include <keymaster/authorization_set.h>
-#include <keymaster/contexts/pure_soft_keymaster_context.h>
-#include <keymaster/contexts/soft_attestation_cert.h>
-#include <keymaster/keymaster_tags.h>
-#include <keymaster/km_openssl/attestation_utils.h>
-#include <vector>
-
-namespace android::hardware::identity::test_utils {
-
-using ::std::optional;
-using ::std::string;
-using ::std::vector;
-
-using ::keymaster::AuthorizationSet;
-using ::keymaster::TypedTag;
-
-class AttestationCertificateParser {
-  public:
-    AttestationCertificateParser(const vector<Certificate>& certChain)
-        : origCertChain_(certChain) {}
-
-    bool parse();
-
-    uint32_t getKeymasterVersion();
-    uint32_t getAttestationVersion();
-    vector<uint8_t> getAttestationChallenge();
-    keymaster_security_level_t getKeymasterSecurityLevel();
-    keymaster_security_level_t getAttestationSecurityLevel();
-
-    template <keymaster_tag_t Tag>
-    bool getSwEnforcedBool(TypedTag<KM_BOOL, Tag> tag) {
-        if (att_sw_enforced_.GetTagValue(tag)) {
-            return true;
-        }
-
-        return false;
-    }
-
-    template <keymaster_tag_t Tag>
-    bool getHwEnforcedBool(TypedTag<KM_BOOL, Tag> tag) {
-        if (att_hw_enforced_.GetTagValue(tag)) {
-            return true;
-        }
-
-        return false;
-    }
-
-    template <keymaster_tag_t Tag>
-    optional<vector<uint8_t>> getHwEnforcedBlob(TypedTag<KM_BYTES, Tag> tag) {
-        keymaster_blob_t blob;
-        if (att_hw_enforced_.GetTagValue(tag, &blob)) {
-            return {};
-        }
-
-        vector<uint8_t> ret(blob.data, blob.data + blob.data_length);
-        return ret;
-    }
-
-    template <keymaster_tag_t Tag>
-    optional<vector<uint8_t>> getSwEnforcedBlob(TypedTag<KM_BYTES, Tag> tag) {
-        keymaster_blob_t blob;
-        if (!att_sw_enforced_.GetTagValue(tag, &blob)) {
-            return {};
-        }
-
-        vector<uint8_t> ret(blob.data, blob.data + blob.data_length);
-        return ret;
-    }
-
-  private:
-    // Helper functions.
-    bool verifyChain(const keymaster_cert_chain_t& chain);
-
-    ASN1_OCTET_STRING* getAttestationRecord(X509* certificate);
-
-    X509* parseCertBlob(const keymaster_blob_t& blob);
-
-    bool verifyAttestationRecord(const keymaster_blob_t& attestation_cert);
-
-    optional<keymaster_cert_chain_t> certificateChainToKeymasterChain(
-            const vector<Certificate>& certificates);
-
-    // Private variables.
-    vector<Certificate> origCertChain_;
-    AuthorizationSet att_sw_enforced_;
-    AuthorizationSet att_hw_enforced_;
-    uint32_t att_attestation_version_;
-    uint32_t att_keymaster_version_;
-    keymaster_security_level_t att_attestation_security_level_;
-    keymaster_security_level_t att_keymaster_security_level_;
-    vector<uint8_t> att_challenge_;
-};
-
-}  // namespace android::hardware::identity::test_utils
-
-#endif  // VTS_ATTESTATION_PARSER_SUPPORT_H
diff --git a/identity/aidl/vts/VtsAttestationTests.cpp b/identity/aidl/vts/VtsAttestationTests.cpp
index 673d08b..5529853 100644
--- a/identity/aidl/vts/VtsAttestationTests.cpp
+++ b/identity/aidl/vts/VtsAttestationTests.cpp
@@ -29,7 +29,6 @@
 #include <future>
 #include <map>
 
-#include "VtsAttestationParserSupport.h"
 #include "VtsIdentityTestUtils.h"
 
 namespace android::hardware::identity {
@@ -44,7 +43,6 @@
 using ::android::String16;
 using ::android::binder::Status;
 
-using test_utils::AttestationCertificateParser;
 using test_utils::setupWritableCredential;
 using test_utils::validateAttestationCertificate;
 
@@ -61,38 +59,12 @@
     sp<IIdentityCredentialStore> credentialStore_;
 };
 
-TEST_P(VtsAttestationTests, verifyAttestationWithNonemptyChallengeEmptyId) {
-    Status result;
-
-    HardwareInformation hwInfo;
-    ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
-
-    sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(setupWritableCredential(writableCredential, credentialStore_));
-
-    string challenge = "NotSoRandomChallenge";
-    vector<uint8_t> attestationChallenge(challenge.begin(), challenge.end());
-    vector<Certificate> attestationCertificate;
-    vector<uint8_t> attestationApplicationId = {};
-
-    result = writableCredential->getAttestationCertificate(
-            attestationApplicationId, attestationChallenge, &attestationCertificate);
-
-    ASSERT_TRUE(result.isOk()) << result.exceptionCode() << "; " << result.exceptionMessage()
-                               << endl;
-
-    EXPECT_TRUE(validateAttestationCertificate(attestationCertificate, attestationChallenge,
-                                               attestationApplicationId, hwInfo));
-}
-
 TEST_P(VtsAttestationTests, verifyAttestationWithNonemptyChallengeNonemptyId) {
     Status result;
 
-    HardwareInformation hwInfo;
-    ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
-
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(setupWritableCredential(writableCredential, credentialStore_,
+                                        false /* testCredential */));
 
     string challenge = "NotSoRandomChallenge1NotSoRandomChallenge1NotSoRandomChallenge1";
     vector<uint8_t> attestationChallenge(challenge.begin(), challenge.end());
@@ -106,18 +78,16 @@
     ASSERT_TRUE(result.isOk()) << result.exceptionCode() << "; " << result.exceptionMessage()
                                << endl;
 
-    EXPECT_TRUE(validateAttestationCertificate(attestationCertificate, attestationChallenge,
-                                               attestationApplicationId, hwInfo));
+    validateAttestationCertificate(attestationCertificate, attestationChallenge,
+                                   attestationApplicationId, false);
 }
 
 TEST_P(VtsAttestationTests, verifyAttestationWithVeryShortChallengeAndId) {
     Status result;
 
-    HardwareInformation hwInfo;
-    ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
-
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(setupWritableCredential(writableCredential, credentialStore_,
+                                        false /* testCredential */));
 
     string challenge = "c";
     vector<uint8_t> attestationChallenge(challenge.begin(), challenge.end());
@@ -131,8 +101,8 @@
     ASSERT_TRUE(result.isOk()) << result.exceptionCode() << "; " << result.exceptionMessage()
                                << endl;
 
-    EXPECT_TRUE(validateAttestationCertificate(attestationCertificate, attestationChallenge,
-                                               attestationApplicationId, hwInfo));
+    validateAttestationCertificate(attestationCertificate, attestationChallenge,
+                                   attestationApplicationId, false);
 }
 
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(VtsAttestationTests);
diff --git a/identity/aidl/vts/VtsHalIdentityEndToEndTest.cpp b/identity/aidl/vts/VtsHalIdentityEndToEndTest.cpp
index 500b79f..cdecb97 100644
--- a/identity/aidl/vts/VtsHalIdentityEndToEndTest.cpp
+++ b/identity/aidl/vts/VtsHalIdentityEndToEndTest.cpp
@@ -174,16 +174,17 @@
 
     string cborPretty;
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    true /* testCredential */));
 
     string challenge = "attestationChallenge";
-    test_utils::AttestationData attData(writableCredential, challenge, {});
+    test_utils::AttestationData attData(writableCredential, challenge,
+                                        {1} /* atteestationApplicationId */);
     ASSERT_TRUE(attData.result.isOk())
             << attData.result.exceptionCode() << "; " << attData.result.exceptionMessage() << endl;
 
-    EXPECT_TRUE(validateAttestationCertificate(attData.attestationCertificate,
-                                               attData.attestationChallenge,
-                                               attData.attestationApplicationId, hwInfo));
+    validateAttestationCertificate(attData.attestationCertificate, attData.attestationChallenge,
+                                   attData.attestationApplicationId, true);
 
     // This is kinda of a hack but we need to give the size of
     // ProofOfProvisioning that we'll expect to receive.
@@ -368,6 +369,7 @@
     optional<vector<uint8_t>> signingPubKey =
             support::certificateChainGetTopMostKey(signingKeyCertificate.encodedCertificate);
     EXPECT_TRUE(signingPubKey);
+    test_utils::verifyAuthKeyCertificate(signingKeyCertificate.encodedCertificate);
 
     // Since we're using a test-credential we know storageKey meaning we can get the
     // private key. Do this, derive the public key from it, and check this matches what
@@ -418,9 +420,9 @@
     }
 
     vector<uint8_t> mac;
-    vector<uint8_t> deviceNameSpacesBytes;
-    ASSERT_TRUE(credential->finishRetrieval(&mac, &deviceNameSpacesBytes).isOk());
-    cborPretty = support::cborPrettyPrint(deviceNameSpacesBytes, 32, {});
+    vector<uint8_t> deviceNameSpacesEncoded;
+    ASSERT_TRUE(credential->finishRetrieval(&mac, &deviceNameSpacesEncoded).isOk());
+    cborPretty = support::cborPrettyPrint(deviceNameSpacesEncoded, 32, {});
     ASSERT_EQ(
             "{\n"
             "  'PersonalData' : {\n"
@@ -435,37 +437,19 @@
             "  },\n"
             "}",
             cborPretty);
-    // The data that is MACed is ["DeviceAuthentication", sessionTranscript, docType,
-    // deviceNameSpacesBytes] so build up that structure
-    cppbor::Array deviceAuthentication;
-    deviceAuthentication.add("DeviceAuthentication");
-    deviceAuthentication.add(sessionTranscript.clone());
 
     string docType = "org.iso.18013-5.2019.mdl";
-    deviceAuthentication.add(docType);
-    deviceAuthentication.add(cppbor::Semantic(24, deviceNameSpacesBytes));
-    vector<uint8_t> deviceAuthenticationBytes =
-            cppbor::Semantic(24, deviceAuthentication.encode()).encode();
-    // Derive the key used for MACing.
     optional<vector<uint8_t>> readerEphemeralPrivateKey =
             support::ecKeyPairGetPrivateKey(readerEphemeralKeyPair.value());
-    optional<vector<uint8_t>> sharedSecret =
-            support::ecdh(signingPubKey.value(), readerEphemeralPrivateKey.value());
-    ASSERT_TRUE(sharedSecret);
-    // Mix-in SessionTranscriptBytes
-    vector<uint8_t> sessionTranscriptBytes =
-            cppbor::Semantic(24, sessionTranscript.encode()).encode();
-    vector<uint8_t> sharedSecretWithSessionTranscriptBytes = sharedSecret.value();
-    std::copy(sessionTranscriptBytes.begin(), sessionTranscriptBytes.end(),
-              std::back_inserter(sharedSecretWithSessionTranscriptBytes));
-    vector<uint8_t> salt = {0x00};
-    vector<uint8_t> info = {};
-    optional<vector<uint8_t>> derivedKey =
-            support::hkdf(sharedSecretWithSessionTranscriptBytes, salt, info, 32);
-    ASSERT_TRUE(derivedKey);
+    optional<vector<uint8_t>> eMacKey = support::calcEMacKey(
+            readerEphemeralPrivateKey.value(),                           // Private Key
+            signingPubKey.value(),                                       // Public Key
+            cppbor::Semantic(24, sessionTranscript.encode()).encode());  // SessionTranscriptBytes
     optional<vector<uint8_t>> calculatedMac =
-            support::coseMac0(derivedKey.value(), {},      // payload
-                              deviceAuthenticationBytes);  // detached content
+            support::calcMac(sessionTranscript.encode(),  // SessionTranscript
+                             docType,                     // DocType
+                             deviceNameSpacesEncoded,     // DeviceNamespaces
+                             eMacKey.value());            // EMacKey
     ASSERT_TRUE(calculatedMac);
     EXPECT_EQ(mac, calculatedMac);
 
@@ -480,18 +464,14 @@
                                 signingKeyBlob, sessionTranscriptEncoded, {},  // readerSignature,
                                 testEntriesEntryCounts)
                         .isOk());
-    ASSERT_TRUE(credential->finishRetrieval(&mac, &deviceNameSpacesBytes).isOk());
-    cborPretty = support::cborPrettyPrint(deviceNameSpacesBytes, 32, {});
+    ASSERT_TRUE(credential->finishRetrieval(&mac, &deviceNameSpacesEncoded).isOk());
+    cborPretty = support::cborPrettyPrint(deviceNameSpacesEncoded, 32, {});
     ASSERT_EQ("{}", cborPretty);
     // Calculate DeviceAuthentication and MAC (MACing key hasn't changed)
-    deviceAuthentication = cppbor::Array();
-    deviceAuthentication.add("DeviceAuthentication");
-    deviceAuthentication.add(sessionTranscript.clone());
-    deviceAuthentication.add(docType);
-    deviceAuthentication.add(cppbor::Semantic(24, deviceNameSpacesBytes));
-    deviceAuthenticationBytes = cppbor::Semantic(24, deviceAuthentication.encode()).encode();
-    calculatedMac = support::coseMac0(derivedKey.value(), {},      // payload
-                                      deviceAuthenticationBytes);  // detached content
+    calculatedMac = support::calcMac(sessionTranscript.encode(),  // SessionTranscript
+                                     docType,                     // DocType
+                                     deviceNameSpacesEncoded,     // DeviceNamespaces
+                                     eMacKey.value());            // EMacKey
     ASSERT_TRUE(calculatedMac);
     EXPECT_EQ(mac, calculatedMac);
 
@@ -506,18 +486,14 @@
                                 signingKeyBlob, sessionTranscriptEncoded, {},  // readerSignature,
                                 testEntriesEntryCounts)
                         .isOk());
-    ASSERT_TRUE(credential->finishRetrieval(&mac, &deviceNameSpacesBytes).isOk());
-    cborPretty = support::cborPrettyPrint(deviceNameSpacesBytes, 32, {});
+    ASSERT_TRUE(credential->finishRetrieval(&mac, &deviceNameSpacesEncoded).isOk());
+    cborPretty = support::cborPrettyPrint(deviceNameSpacesEncoded, 32, {});
     ASSERT_EQ("{}", cborPretty);
     // Calculate DeviceAuthentication and MAC (MACing key hasn't changed)
-    deviceAuthentication = cppbor::Array();
-    deviceAuthentication.add("DeviceAuthentication");
-    deviceAuthentication.add(sessionTranscript.clone());
-    deviceAuthentication.add(docType);
-    deviceAuthentication.add(cppbor::Semantic(24, deviceNameSpacesBytes));
-    deviceAuthenticationBytes = cppbor::Semantic(24, deviceAuthentication.encode()).encode();
-    calculatedMac = support::coseMac0(derivedKey.value(), {},      // payload
-                                      deviceAuthenticationBytes);  // detached content
+    calculatedMac = support::calcMac(sessionTranscript.encode(),  // SessionTranscript
+                                     docType,                     // DocType
+                                     deviceNameSpacesEncoded,     // DeviceNamespaces
+                                     eMacKey.value());            // EMacKey
     ASSERT_TRUE(calculatedMac);
     EXPECT_EQ(mac, calculatedMac);
 }
diff --git a/identity/aidl/vts/VtsIWritableIdentityCredentialTests.cpp b/identity/aidl/vts/VtsIWritableIdentityCredentialTests.cpp
index 8c35952..56e17ba 100644
--- a/identity/aidl/vts/VtsIWritableIdentityCredentialTests.cpp
+++ b/identity/aidl/vts/VtsIWritableIdentityCredentialTests.cpp
@@ -61,7 +61,8 @@
     ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
 
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     vector<uint8_t> attestationChallenge;
     vector<Certificate> attestationCertificate;
@@ -82,12 +83,13 @@
     ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
 
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     string challenge = "NotSoRandomChallenge1NotSoRandomChallenge1NotSoRandomChallenge1";
     vector<uint8_t> attestationChallenge(challenge.begin(), challenge.end());
     vector<Certificate> attestationCertificate;
-    vector<uint8_t> attestationApplicationId = {};
+    vector<uint8_t> attestationApplicationId = {1};
 
     result = writableCredential->getAttestationCertificate(
             attestationApplicationId, attestationChallenge, &attestationCertificate);
@@ -95,27 +97,27 @@
     EXPECT_TRUE(result.isOk()) << result.exceptionCode() << "; " << result.exceptionMessage()
                                << endl;
 
-    EXPECT_TRUE(test_utils::validateAttestationCertificate(
-            attestationCertificate, attestationChallenge, attestationApplicationId, hwInfo));
+    test_utils::validateAttestationCertificate(attestationCertificate, attestationChallenge,
+                                               attestationApplicationId, false);
 }
 
 TEST_P(IdentityCredentialTests, verifyAttestationDoubleCallFails) {
     Status result;
 
-    HardwareInformation hwInfo;
-    ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
-
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     string challenge = "NotSoRandomChallenge1";
-    test_utils::AttestationData attData(writableCredential, challenge, {});
-    ASSERT_TRUE(test_utils::validateAttestationCertificate(
-            attData.attestationCertificate, attData.attestationChallenge,
-            attData.attestationApplicationId, hwInfo));
+    test_utils::AttestationData attData(writableCredential, challenge,
+                                        {1} /* atteestationApplicationId */);
+    test_utils::validateAttestationCertificate(attData.attestationCertificate,
+                                               attData.attestationChallenge,
+                                               attData.attestationApplicationId, false);
 
     string challenge2 = "NotSoRandomChallenge2";
-    test_utils::AttestationData attData2(writableCredential, challenge2, {});
+    test_utils::AttestationData attData2(writableCredential, challenge2,
+                                         {} /* atteestationApplicationId */);
     EXPECT_FALSE(attData2.result.isOk()) << attData2.result.exceptionCode() << "; "
                                          << attData2.result.exceptionMessage() << endl;
     EXPECT_EQ(binder::Status::EX_SERVICE_SPECIFIC, attData2.result.exceptionCode());
@@ -125,7 +127,8 @@
 TEST_P(IdentityCredentialTests, verifyStartPersonalization) {
     Status result;
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     // First call should go through
     const vector<int32_t> entryCounts = {2, 4};
@@ -147,7 +150,8 @@
 TEST_P(IdentityCredentialTests, verifyStartPersonalizationMin) {
     Status result;
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     // Verify minimal number of profile count and entry count
     const vector<int32_t> entryCounts = {1, 1};
@@ -160,7 +164,8 @@
 TEST_P(IdentityCredentialTests, verifyStartPersonalizationOne) {
     Status result;
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     // Verify minimal number of profile count and entry count
     const vector<int32_t> entryCounts = {1};
@@ -173,7 +178,8 @@
 TEST_P(IdentityCredentialTests, verifyStartPersonalizationLarge) {
     Status result;
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     // Verify set a large number of profile count and entry count is ok
     const vector<int32_t> entryCounts = {3000};
@@ -186,7 +192,8 @@
 TEST_P(IdentityCredentialTests, verifyProfileNumberMismatchShouldFail) {
     Status result;
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     // Enter mismatched entry and profile numbers
     const vector<int32_t> entryCounts = {5, 6};
@@ -224,7 +231,8 @@
 TEST_P(IdentityCredentialTests, verifyDuplicateProfileId) {
     Status result;
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     const vector<int32_t> entryCounts = {3, 6};
     writableCredential->setExpectedProofOfProvisioningSize(123456);
@@ -283,10 +291,12 @@
     ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
 
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     string challenge = "NotSoRandomChallenge1";
-    test_utils::AttestationData attData(writableCredential, challenge, {});
+    test_utils::AttestationData attData(writableCredential, challenge,
+                                        {} /* atteestationApplicationId */);
     EXPECT_TRUE(attData.result.isOk())
             << attData.result.exceptionCode() << "; " << attData.result.exceptionMessage() << endl;
 
@@ -294,7 +304,7 @@
     ASSERT_TRUE(readerCertificate1);
 
     const vector<int32_t> entryCounts = {1u};
-    size_t expectedPoPSize = 186 + readerCertificate1.value().size();
+    size_t expectedPoPSize = 185 + readerCertificate1.value().size();
     // OK to fail, not available in v1 HAL
     writableCredential->setExpectedProofOfProvisioningSize(expectedPoPSize);
     result = writableCredential->startPersonalization(1, entryCounts);
@@ -308,7 +318,7 @@
     ASSERT_TRUE(secureProfiles);
 
     const vector<test_utils::TestEntryData> testEntries1 = {
-            {"Name Space", "Last name", string("Turing"), vector<int32_t>{0, 1}},
+            {"Name Space", "Last name", string("Turing"), vector<int32_t>{1}},
     };
 
     map<const test_utils::TestEntryData*, vector<vector<uint8_t>>> encryptedBlobs;
@@ -347,11 +357,11 @@
             "      {\n"
             "        'name' : 'Last name',\n"
             "        'value' : 'Turing',\n"
-            "        'accessControlProfiles' : [0, 1, ],\n"
+            "        'accessControlProfiles' : [1, ],\n"
             "      },\n"
             "    ],\n"
             "  },\n"
-            "  true,\n"
+            "  false,\n"
             "]",
             cborPretty);
 
@@ -370,10 +380,12 @@
     ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
 
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     string challenge = "NotSoRandomChallenge";
-    test_utils::AttestationData attData(writableCredential, challenge, {});
+    test_utils::AttestationData attData(writableCredential, challenge,
+                                        {} /* atteestationApplicationId */);
     EXPECT_TRUE(attData.result.isOk())
             << attData.result.exceptionCode() << "; " << attData.result.exceptionMessage() << endl;
 
@@ -510,7 +522,7 @@
             "      },\n"
             "    ],\n"
             "  },\n"
-            "  true,\n"
+            "  false,\n"
             "]",
             cborPretty);
 
@@ -529,10 +541,12 @@
     ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
 
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     string challenge = "NotSoRandomChallenge";
-    test_utils::AttestationData attData(writableCredential, challenge, {});
+    test_utils::AttestationData attData(writableCredential, challenge,
+                                        {} /* atteestationApplicationId */);
     ASSERT_TRUE(attData.result.isOk())
             << attData.result.exceptionCode() << "; " << attData.result.exceptionMessage() << endl;
 
@@ -591,10 +605,12 @@
     ASSERT_TRUE(credentialStore_->getHardwareInformation(&hwInfo).isOk());
 
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     string challenge = "NotSoRandomChallenge";
-    test_utils::AttestationData attData(writableCredential, challenge, {});
+    test_utils::AttestationData attData(writableCredential, challenge,
+                                        {} /* atteestationApplicationId */);
     ASSERT_TRUE(attData.result.isOk())
             << attData.result.exceptionCode() << "; " << attData.result.exceptionMessage() << endl;
 
@@ -667,7 +683,8 @@
 
 TEST_P(IdentityCredentialTests, verifyAccessControlProfileIdOutOfRange) {
     sp<IWritableIdentityCredential> writableCredential;
-    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_));
+    ASSERT_TRUE(test_utils::setupWritableCredential(writableCredential, credentialStore_,
+                                                    false /* testCredential */));
 
     const vector<int32_t> entryCounts = {1};
     writableCredential->setExpectedProofOfProvisioningSize(123456);
diff --git a/identity/aidl/vts/VtsIdentityTestUtils.cpp b/identity/aidl/vts/VtsIdentityTestUtils.cpp
index b6ed80f..3b10651 100644
--- a/identity/aidl/vts/VtsIdentityTestUtils.cpp
+++ b/identity/aidl/vts/VtsIdentityTestUtils.cpp
@@ -14,13 +14,17 @@
  * limitations under the License.
  */
 
+#define LOG_TAG "VtsIdentityTestUtils"
+
 #include "VtsIdentityTestUtils.h"
 
 #include <aidl/Gtest.h>
+#include <android-base/logging.h>
+#include <keymaster/km_openssl/openssl_utils.h>
+#include <keymasterV4_1/attestation_record.h>
+#include <charconv>
 #include <map>
 
-#include "VtsAttestationParserSupport.h"
-
 namespace android::hardware::identity::test_utils {
 
 using std::endl;
@@ -32,15 +36,15 @@
 using ::android::sp;
 using ::android::String16;
 using ::android::binder::Status;
+using ::keymaster::X509_Ptr;
 
 bool setupWritableCredential(sp<IWritableIdentityCredential>& writableCredential,
-                             sp<IIdentityCredentialStore>& credentialStore) {
+                             sp<IIdentityCredentialStore>& credentialStore, bool testCredential) {
     if (credentialStore == nullptr) {
         return false;
     }
 
     string docType = "org.iso.18013-5.2019.mdl";
-    bool testCredential = true;
     Status result = credentialStore->createCredential(docType, testCredential, &writableCredential);
 
     if (result.isOk() && writableCredential != nullptr) {
@@ -178,63 +182,269 @@
     }
 }
 
-bool validateAttestationCertificate(const vector<Certificate>& inputCertificates,
-                                    const vector<uint8_t>& expectedChallenge,
-                                    const vector<uint8_t>& expectedAppId,
-                                    const HardwareInformation& hwInfo) {
-    AttestationCertificateParser certParser_(inputCertificates);
-    bool ret = certParser_.parse();
-    EXPECT_TRUE(ret);
-    if (!ret) {
+string x509NameToRfc2253String(X509_NAME* name) {
+    char* buf;
+    size_t bufSize;
+    BIO* bio;
+
+    bio = BIO_new(BIO_s_mem());
+    X509_NAME_print_ex(bio, name, 0, XN_FLAG_RFC2253);
+    bufSize = BIO_get_mem_data(bio, &buf);
+    string ret = string(buf, bufSize);
+    BIO_free(bio);
+
+    return ret;
+}
+
+int parseDigits(const char** s, int numDigits) {
+    int result;
+    auto [_, ec] = std::from_chars(*s, *s + numDigits, result);
+    if (ec != std::errc()) {
+        LOG(ERROR) << "Error parsing " << numDigits << " digits "
+                   << " from " << s;
+        return 0;
+    }
+    *s += numDigits;
+    return result;
+}
+
+bool parseAsn1Time(const ASN1_TIME* asn1Time, time_t* outTime) {
+    struct tm tm;
+
+    memset(&tm, '\0', sizeof(tm));
+    const char* timeStr = (const char*)asn1Time->data;
+    const char* s = timeStr;
+    if (asn1Time->type == V_ASN1_UTCTIME) {
+        tm.tm_year = parseDigits(&s, 2);
+        if (tm.tm_year < 70) {
+            tm.tm_year += 100;
+        }
+    } else if (asn1Time->type == V_ASN1_GENERALIZEDTIME) {
+        tm.tm_year = parseDigits(&s, 4) - 1900;
+        tm.tm_year -= 1900;
+    } else {
+        LOG(ERROR) << "Unsupported ASN1_TIME type " << asn1Time->type;
+        return false;
+    }
+    tm.tm_mon = parseDigits(&s, 2) - 1;
+    tm.tm_mday = parseDigits(&s, 2);
+    tm.tm_hour = parseDigits(&s, 2);
+    tm.tm_min = parseDigits(&s, 2);
+    tm.tm_sec = parseDigits(&s, 2);
+    // This may need to be updated if someone create certificates using +/- instead of Z.
+    //
+    if (*s != 'Z') {
+        LOG(ERROR) << "Expected Z in string '" << timeStr << "' at offset " << (s - timeStr);
         return false;
     }
 
-    // As per the IC HAL, the version of the Identity
-    // Credential HAL is 1.0 - and this is encoded as major*10 + minor. This field is used by
-    // Keymaster which is known to report integers less than or equal to 4 (for KM up to 4.0)
-    // and integers greater or equal than 41 (for KM starting with 4.1).
-    //
-    // Since we won't get to version 4.0 of the IC HAL for a while, let's also check that a KM
-    // version isn't errornously returned.
-    EXPECT_LE(10, certParser_.getKeymasterVersion());
-    EXPECT_GT(40, certParser_.getKeymasterVersion());
-    EXPECT_LE(3, certParser_.getAttestationVersion());
-
-    // Verify the app id matches to whatever we set it to be.
-    optional<vector<uint8_t>> appId =
-            certParser_.getSwEnforcedBlob(::keymaster::TAG_ATTESTATION_APPLICATION_ID);
-    if (appId) {
-        EXPECT_EQ(expectedAppId.size(), appId.value().size());
-        EXPECT_EQ(0, memcmp(expectedAppId.data(), appId.value().data(), expectedAppId.size()));
-    } else {
-        // app id not found
-        EXPECT_EQ(0, expectedAppId.size());
+    time_t t = timegm(&tm);
+    if (t == -1) {
+        LOG(ERROR) << "Error converting broken-down time to time_t";
+        return false;
     }
-
-    EXPECT_TRUE(certParser_.getHwEnforcedBool(::keymaster::TAG_IDENTITY_CREDENTIAL_KEY));
-    EXPECT_FALSE(certParser_.getHwEnforcedBool(::keymaster::TAG_INCLUDE_UNIQUE_ID));
-
-    // Verify the challenge always matches in size and data of what is passed
-    // in.
-    vector<uint8_t> attChallenge = certParser_.getAttestationChallenge();
-    EXPECT_EQ(expectedChallenge.size(), attChallenge.size());
-    EXPECT_EQ(0, memcmp(expectedChallenge.data(), attChallenge.data(), expectedChallenge.size()));
-
-    // Ensure the attestation conveys that it's implemented in secure hardware (with carve-out
-    // for the reference implementation which cannot be implemented in secure hardware).
-    if (hwInfo.credentialStoreName == "Identity Credential Reference Implementation" &&
-        hwInfo.credentialStoreAuthorName == "Google") {
-        EXPECT_LE(KM_SECURITY_LEVEL_SOFTWARE, certParser_.getKeymasterSecurityLevel());
-        EXPECT_LE(KM_SECURITY_LEVEL_SOFTWARE, certParser_.getAttestationSecurityLevel());
-
-    } else {
-        // Actual devices should use TrustedEnvironment or StrongBox.
-        EXPECT_LE(KM_SECURITY_LEVEL_TRUSTED_ENVIRONMENT, certParser_.getKeymasterSecurityLevel());
-        EXPECT_LE(KM_SECURITY_LEVEL_TRUSTED_ENVIRONMENT, certParser_.getAttestationSecurityLevel());
-    }
+    *outTime = t;
     return true;
 }
 
+void validateAttestationCertificate(const vector<Certificate>& credentialKeyCertChain,
+                                    const vector<uint8_t>& expectedChallenge,
+                                    const vector<uint8_t>& expectedAppId, bool isTestCredential) {
+    ASSERT_GE(credentialKeyCertChain.size(), 2);
+
+    vector<uint8_t> certBytes = credentialKeyCertChain[0].encodedCertificate;
+    const uint8_t* certData = certBytes.data();
+    X509_Ptr cert = X509_Ptr(d2i_X509(nullptr, &certData, certBytes.size()));
+
+    vector<uint8_t> batchCertBytes = credentialKeyCertChain[1].encodedCertificate;
+    const uint8_t* batchCertData = batchCertBytes.data();
+    X509_Ptr batchCert = X509_Ptr(d2i_X509(nullptr, &batchCertData, batchCertBytes.size()));
+
+    // First get some values from the batch certificate which is checked
+    // against the top-level certificate (subject, notAfter)
+    //
+
+    X509_NAME* batchSubject = X509_get_subject_name(batchCert.get());
+    ASSERT_NE(nullptr, batchSubject);
+    time_t batchNotAfter;
+    ASSERT_TRUE(parseAsn1Time(X509_get0_notAfter(batchCert.get()), &batchNotAfter));
+
+    // Check all the requirements from IWritableIdentityCredential::getAttestationCertificate()...
+    //
+
+    //  - version: INTEGER 2 (means v3 certificate).
+    EXPECT_EQ(2, X509_get_version(cert.get()));
+
+    //  - serialNumber: INTEGER 1 (fixed value: same on all certs).
+    EXPECT_EQ(1, ASN1_INTEGER_get(X509_get_serialNumber(cert.get())));
+
+    //  - signature: must be set to ECDSA.
+    EXPECT_EQ(NID_ecdsa_with_SHA256, X509_get_signature_nid(cert.get()));
+
+    //  - subject: CN shall be set to "Android Identity Credential Key". (fixed value:
+    //    same on all certs)
+    X509_NAME* subject = X509_get_subject_name(cert.get());
+    ASSERT_NE(nullptr, subject);
+    EXPECT_EQ("CN=Android Identity Credential Key", x509NameToRfc2253String(subject));
+
+    //  - issuer: Same as the subject field of the batch attestation key.
+    X509_NAME* issuer = X509_get_issuer_name(cert.get());
+    ASSERT_NE(nullptr, issuer);
+    EXPECT_EQ(x509NameToRfc2253String(batchSubject), x509NameToRfc2253String(issuer));
+
+    //  - validity: Should be from current time and expire at the same time as the
+    //    attestation batch certificate used.
+    //
+    //  Allow for 10 seconds drift to account for the time drift between Secure HW
+    //  and this environment plus the difference between when the certificate was
+    //  created and until now
+    //
+    time_t notBefore;
+    ASSERT_TRUE(parseAsn1Time(X509_get0_notBefore(cert.get()), &notBefore));
+    uint64_t now = time(nullptr);
+    int64_t diffSecs = now - notBefore;
+    int64_t allowDriftSecs = 10;
+    EXPECT_LE(-allowDriftSecs, diffSecs);
+    EXPECT_GE(allowDriftSecs, diffSecs);
+
+    time_t notAfter;
+    ASSERT_TRUE(parseAsn1Time(X509_get0_notAfter(cert.get()), &notAfter));
+    EXPECT_EQ(notAfter, batchNotAfter);
+
+    auto [err, attRec] = keymaster::V4_1::parse_attestation_record(certBytes);
+    ASSERT_EQ(keymaster::V4_1::ErrorCode::OK, err);
+
+    //  - subjectPublicKeyInfo: must contain attested public key.
+
+    //  - The attestationVersion field in the attestation extension must be at least 3.
+    EXPECT_GE(attRec.attestation_version, 3);
+
+    //  - The attestationSecurityLevel field must be set to either Software (0),
+    //    TrustedEnvironment (1), or StrongBox (2) depending on how attestation is
+    //    implemented.
+    EXPECT_GE(attRec.attestation_security_level,
+              keymaster::V4_0::SecurityLevel::TRUSTED_ENVIRONMENT);
+
+    //  - The keymasterVersion field in the attestation extension must be set to the.
+    //    same value as used for Android Keystore keys.
+    //
+    // Nothing to check here...
+
+    //  - The keymasterSecurityLevel field in the attestation extension must be set to
+    //    either Software (0), TrustedEnvironment (1), or StrongBox (2) depending on how
+    //    the Trusted Application backing the HAL implementation is implemented.
+    EXPECT_GE(attRec.keymaster_security_level, keymaster::V4_0::SecurityLevel::TRUSTED_ENVIRONMENT);
+
+    //  - The attestationChallenge field must be set to the passed-in challenge.
+    EXPECT_EQ(expectedChallenge.size(), attRec.attestation_challenge.size());
+    EXPECT_TRUE(memcmp(expectedChallenge.data(), attRec.attestation_challenge.data(),
+                       attRec.attestation_challenge.size()) == 0);
+
+    //  - The uniqueId field must be empty.
+    EXPECT_EQ(attRec.unique_id.size(), 0);
+
+    //  - The softwareEnforced field in the attestation extension must include
+    //    Tag::ATTESTATION_APPLICATION_ID which must be set to the bytes of the passed-in
+    //    attestationApplicationId.
+    EXPECT_TRUE(attRec.software_enforced.Contains(keymaster::V4_0::TAG_ATTESTATION_APPLICATION_ID,
+                                                  expectedAppId));
+
+    //  - The teeEnforced field in the attestation extension must include
+    //
+    //    - Tag::IDENTITY_CREDENTIAL_KEY which indicates that the key is an Identity
+    //      Credential key (which can only sign/MAC very specific messages) and not an Android
+    //      Keystore key (which can be used to sign/MAC anything). This must not be set
+    //      for test credentials.
+    bool hasIcKeyTag =
+            attRec.hardware_enforced.Contains(static_cast<android::hardware::keymaster::V4_0::Tag>(
+                    keymaster::V4_1::Tag::IDENTITY_CREDENTIAL_KEY));
+    if (isTestCredential) {
+        EXPECT_FALSE(hasIcKeyTag);
+    } else {
+        EXPECT_TRUE(hasIcKeyTag);
+    }
+
+    //    - Tag::PURPOSE must be set to SIGN
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_PURPOSE,
+                                                  keymaster::V4_0::KeyPurpose::SIGN));
+
+    //    - Tag::KEY_SIZE must be set to the appropriate key size, in bits (e.g. 256)
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_KEY_SIZE, 256));
+
+    //    - Tag::ALGORITHM must be set to EC
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_ALGORITHM,
+                                                  keymaster::V4_0::Algorithm::EC));
+
+    //    - Tag::NO_AUTH_REQUIRED must be set
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_NO_AUTH_REQUIRED));
+
+    //    - Tag::DIGEST must be include SHA_2_256
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_DIGEST,
+                                                  keymaster::V4_0::Digest::SHA_2_256));
+
+    //    - Tag::EC_CURVE must be set to P_256
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_EC_CURVE,
+                                                  keymaster::V4_0::EcCurve::P_256));
+
+    //    - Tag::ROOT_OF_TRUST must be set
+    //
+    EXPECT_GE(attRec.root_of_trust.security_level,
+              keymaster::V4_0::SecurityLevel::TRUSTED_ENVIRONMENT);
+
+    //    - Tag::OS_VERSION and Tag::OS_PATCHLEVEL must be set
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_OS_VERSION));
+    EXPECT_TRUE(attRec.hardware_enforced.Contains(keymaster::V4_0::TAG_OS_PATCHLEVEL));
+
+    // TODO: we could retrieve osVersion and osPatchLevel from Android itself and compare it
+    // with what was reported in the certificate.
+}
+
+void verifyAuthKeyCertificate(const vector<uint8_t>& authKeyCertChain) {
+    const uint8_t* data = authKeyCertChain.data();
+    auto cert = X509_Ptr(d2i_X509(nullptr, &data, authKeyCertChain.size()));
+
+    //  - version: INTEGER 2 (means v3 certificate).
+    EXPECT_EQ(X509_get_version(cert.get()), 2);
+
+    //  - serialNumber: INTEGER 1 (fixed value: same on all certs).
+    EXPECT_EQ(ASN1_INTEGER_get(X509_get_serialNumber(cert.get())), 1);
+
+    //  - signature: must be set to ECDSA.
+    EXPECT_EQ(X509_get_signature_nid(cert.get()), NID_ecdsa_with_SHA256);
+
+    //  - subject: CN shall be set to "Android Identity Credential Authentication Key". (fixed
+    //    value: same on all certs)
+    X509_NAME* subject = X509_get_subject_name(cert.get());
+    ASSERT_NE(subject, nullptr);
+    EXPECT_EQ(x509NameToRfc2253String(subject),
+              "CN=Android Identity Credential Authentication Key");
+
+    //  - issuer: CN shall be set to "Android Identity Credential Key". (fixed value:
+    //    same on all certs)
+    X509_NAME* issuer = X509_get_issuer_name(cert.get());
+    ASSERT_NE(issuer, nullptr);
+    EXPECT_EQ(x509NameToRfc2253String(issuer), "CN=Android Identity Credential Key");
+
+    //  - subjectPublicKeyInfo: must contain attested public key.
+
+    //  - validity: should be from current time and one year in the future (365 days).
+    time_t notBefore, notAfter;
+    ASSERT_TRUE(parseAsn1Time(X509_get0_notAfter(cert.get()), &notAfter));
+    ASSERT_TRUE(parseAsn1Time(X509_get0_notBefore(cert.get()), &notBefore));
+
+    //  Allow for 10 seconds drift to account for the time drift between Secure HW
+    //  and this environment plus the difference between when the certificate was
+    //  created and until now
+    //
+    uint64_t now = time(nullptr);
+    int64_t diffSecs = now - notBefore;
+    int64_t allowDriftSecs = 10;
+    EXPECT_LE(-allowDriftSecs, diffSecs);
+    EXPECT_GE(allowDriftSecs, diffSecs);
+    constexpr uint64_t kSecsInOneYear = 365 * 24 * 60 * 60;
+    EXPECT_EQ(notBefore + kSecsInOneYear, notAfter);
+}
+
 vector<RequestNamespace> buildRequestNamespaces(const vector<TestEntryData> entries) {
     vector<RequestNamespace> ret;
     RequestNamespace curNs;
diff --git a/identity/aidl/vts/VtsIdentityTestUtils.h b/identity/aidl/vts/VtsIdentityTestUtils.h
index 673b736..85c24f8 100644
--- a/identity/aidl/vts/VtsIdentityTestUtils.h
+++ b/identity/aidl/vts/VtsIdentityTestUtils.h
@@ -34,8 +34,8 @@
 
 struct AttestationData {
     AttestationData(sp<IWritableIdentityCredential>& writableCredential, string challenge,
-                    vector<uint8_t> applicationId)
-        : attestationApplicationId(applicationId) {
+                    vector<uint8_t> attestationAppId)
+        : attestationApplicationId(attestationAppId) {
         // ASSERT_NE(writableCredential, nullptr);
 
         if (!challenge.empty()) {
@@ -94,7 +94,7 @@
 };
 
 bool setupWritableCredential(sp<IWritableIdentityCredential>& writableCredential,
-                             sp<IIdentityCredentialStore>& credentialStore);
+                             sp<IIdentityCredentialStore>& credentialStore, bool testCredential);
 
 optional<vector<uint8_t>> generateReaderCertificate(string serialDecimal);
 
@@ -111,13 +111,17 @@
 
 void setImageData(vector<uint8_t>& image);
 
-bool validateAttestationCertificate(const vector<Certificate>& inputCertificates,
+void validateAttestationCertificate(const vector<Certificate>& credentialKeyCertChain,
                                     const vector<uint8_t>& expectedChallenge,
-                                    const vector<uint8_t>& expectedAppId,
-                                    const HardwareInformation& hwInfo);
+                                    const vector<uint8_t>& expectedAppId, bool isTestCredential);
 
 vector<RequestNamespace> buildRequestNamespaces(const vector<TestEntryData> entries);
 
+// Verifies that the X.509 certificate for a just created authentication key
+// is valid.
+//
+void verifyAuthKeyCertificate(const vector<uint8_t>& authKeyCertChain);
+
 }  // namespace android::hardware::identity::test_utils
 
 #endif  // VTS_IDENTITY_TEST_UTILS_H
diff --git a/identity/support/include/android/hardware/identity/support/IdentityCredentialSupport.h b/identity/support/include/android/hardware/identity/support/IdentityCredentialSupport.h
index f7ec7c5..3aa5bb6 100644
--- a/identity/support/include/android/hardware/identity/support/IdentityCredentialSupport.h
+++ b/identity/support/include/android/hardware/identity/support/IdentityCredentialSupport.h
@@ -35,6 +35,9 @@
 using ::std::vector;
 using ::std::pair;
 
+// The semantic tag for a bstr which includes Encoded CBOR (RFC 7049, section 2.4)
+const int kSemanticTagEncodedCbor = 24;
+
 // ---------------------------------------------------------------------------
 // Miscellaneous utilities.
 // ---------------------------------------------------------------------------
@@ -108,45 +111,47 @@
 // ---------------------------------------------------------------------------
 // EC crypto functionality / abstraction (only supports P-256).
 // ---------------------------------------------------------------------------
+
 // Creates an 256-bit EC key using the NID_X9_62_prime256v1 curve, returns the
-// PKCS#8 encoded key-pair.  Also generates an attestation
-// certificate using the |challenge| and |applicationId|, and returns the generated
-// certificate in X.509 certificate chain format.
+// DER encoded private key.  Also generates an attestation using the |challenge|
+// and |applicationId|, and returns the generated certificate chain.
 //
-// The attestation time fields used will be the current time, and expires in one year.
+// The notBeffore field will be the current time and the notAfter will be the same
+// same time as the batch certificate.
 //
 // The first parameter of the return value is the keyPair generated, second return in
 // the pair is the attestation certificate generated.
-optional<std::pair<vector<uint8_t>, vector<vector<uint8_t>>>> createEcKeyPairAndAttestation(
-        const vector<uint8_t>& challenge, const vector<uint8_t>& applicationId);
-
-// Like createEcKeyPairAndAttestation() but allows you to choose the public key.
 //
+optional<std::pair<vector<uint8_t>, vector<vector<uint8_t>>>> createEcKeyPairAndAttestation(
+        const vector<uint8_t>& challenge, const vector<uint8_t>& applicationId,
+        bool isTestCredential);
+
+// (TODO: remove when no longer used by 3rd party.)
 optional<vector<vector<uint8_t>>> createAttestationForEcPublicKey(
         const vector<uint8_t>& publicKey, const vector<uint8_t>& challenge,
         const vector<uint8_t>& applicationId);
 
 // Creates an 256-bit EC key using the NID_X9_62_prime256v1 curve, returns the
-// PKCS#8 encoded key-pair.
+// private key in DER format (as specified in RFC 5915).
 //
 optional<vector<uint8_t>> createEcKeyPair();
 
-// For an EC key |keyPair| encoded in PKCS#8 format, extracts the public key in
+// For an EC key |keyPair| encoded in DER format, extracts the public key in
 // uncompressed point form.
 //
 optional<vector<uint8_t>> ecKeyPairGetPublicKey(const vector<uint8_t>& keyPair);
 
-// For an EC key |keyPair| encoded in PKCS#8 format, extracts the private key as
+// For an EC key |keyPair| encoded in DER format, extracts the private key as
 // an EC uncompressed key.
 //
 optional<vector<uint8_t>> ecKeyPairGetPrivateKey(const vector<uint8_t>& keyPair);
 
-// Creates a PKCS#8 encoded key-pair from a private key (which must be uncompressed,
-// e.g. 32 bytes). The public key is derived from the given private key..
+// Creates a DER encoded representation from a private key (which must be uncompressed,
+// e.g. 32 bytes).
 //
 optional<vector<uint8_t>> ecPrivateKeyToKeyPair(const vector<uint8_t>& privateKey);
 
-// For an EC key |keyPair| encoded in PKCS#8 format, creates a PKCS#12 structure
+// For an EC key |keyPair| encoded in DER format, creates a PKCS#12 structure
 // with the key-pair (not using a password to encrypt the data). The public key
 // in the created structure is included as a certificate, using the given fields
 // |serialDecimal|, |issuer|, |subject|, |validityNotBefore|, and
@@ -209,6 +214,13 @@
 //
 optional<pair<size_t, size_t>> certificateFindSignature(const vector<uint8_t>& x509Certificate);
 
+// Extracts notBefore and notAfter from the top-most certificate in |certificateChain
+// (which should be a concatenated chain of DER-encoded X.509 certificates).
+//
+// Returns notBefore and notAfter in that order.
+//
+optional<pair<time_t, time_t>> certificateGetValidity(const vector<uint8_t>& x509Certificate);
+
 // Generates a X.509 certificate for |publicKey| (which must be in the format
 // returned by ecKeyPairGetPublicKey()).
 //
@@ -351,6 +363,15 @@
 // Utility functions specific to IdentityCredential.
 // ---------------------------------------------------------------------------
 
+optional<vector<uint8_t>> calcMac(const vector<uint8_t>& sessionTranscriptEncoded,
+                                  const string& docType,
+                                  const vector<uint8_t>& deviceNameSpacesEncoded,
+                                  const vector<uint8_t>& eMacKey);
+
+optional<vector<uint8_t>> calcEMacKey(const vector<uint8_t>& privateKey,
+                                      const vector<uint8_t>& publicKey,
+                                      const vector<uint8_t>& sessionTranscriptBytes);
+
 // Returns the testing AES-128 key where all bits are set to 0.
 const vector<uint8_t>& getTestHardwareBoundKey();
 
diff --git a/identity/support/src/IdentityCredentialSupport.cpp b/identity/support/src/IdentityCredentialSupport.cpp
index 747f182..77b795b 100644
--- a/identity/support/src/IdentityCredentialSupport.cpp
+++ b/identity/support/src/IdentityCredentialSupport.cpp
@@ -44,6 +44,7 @@
 
 #include <android-base/logging.h>
 #include <android-base/stringprintf.h>
+#include <charconv>
 
 #include <cppbor.h>
 #include <cppbor_parse.h>
@@ -54,6 +55,7 @@
 #include <keymaster/contexts/soft_attestation_cert.h>
 #include <keymaster/keymaster_tags.h>
 #include <keymaster/km_openssl/attestation_utils.h>
+#include <keymaster/km_openssl/certificate_utils.h>
 
 namespace android {
 namespace hardware {
@@ -870,16 +872,109 @@
     return hmac;
 }
 
+int parseDigits(const char** s, int numDigits) {
+    int result;
+    auto [_, ec] = std::from_chars(*s, *s + numDigits, result);
+    if (ec != std::errc()) {
+        LOG(ERROR) << "Error parsing " << numDigits << " digits "
+                   << " from " << s;
+        return 0;
+    }
+    *s += numDigits;
+    return result;
+}
+
+bool parseAsn1Time(const ASN1_TIME* asn1Time, time_t* outTime) {
+    struct tm tm;
+
+    memset(&tm, '\0', sizeof(tm));
+    const char* timeStr = (const char*)asn1Time->data;
+    const char* s = timeStr;
+    if (asn1Time->type == V_ASN1_UTCTIME) {
+        tm.tm_year = parseDigits(&s, 2);
+        if (tm.tm_year < 70) {
+            tm.tm_year += 100;
+        }
+    } else if (asn1Time->type == V_ASN1_GENERALIZEDTIME) {
+        tm.tm_year = parseDigits(&s, 4) - 1900;
+        tm.tm_year -= 1900;
+    } else {
+        LOG(ERROR) << "Unsupported ASN1_TIME type " << asn1Time->type;
+        return false;
+    }
+    tm.tm_mon = parseDigits(&s, 2) - 1;
+    tm.tm_mday = parseDigits(&s, 2);
+    tm.tm_hour = parseDigits(&s, 2);
+    tm.tm_min = parseDigits(&s, 2);
+    tm.tm_sec = parseDigits(&s, 2);
+    // This may need to be updated if someone create certificates using +/- instead of Z.
+    //
+    if (*s != 'Z') {
+        LOG(ERROR) << "Expected Z in string '" << timeStr << "' at offset " << (s - timeStr);
+        return false;
+    }
+
+    time_t t = timegm(&tm);
+    if (t == -1) {
+        LOG(ERROR) << "Error converting broken-down time to time_t";
+        return false;
+    }
+    *outTime = t;
+    return true;
+}
+
 // Generates the attestation certificate with the parameters passed in.  Note
 // that the passed in |activeTimeMilliSeconds| |expireTimeMilliSeconds| are in
 // milli seconds since epoch.  We are setting them to milliseconds due to
 // requirement in AuthorizationSet KM_DATE fields.  The certificate created is
 // actually in seconds.
-optional<vector<vector<uint8_t>>> createAttestation(const EVP_PKEY* key,
-                                                    const vector<uint8_t>& applicationId,
-                                                    const vector<uint8_t>& challenge,
-                                                    uint64_t activeTimeMilliSeconds,
-                                                    uint64_t expireTimeMilliSeconds) {
+//
+// If 0 is passed for expiration time, the expiration time from batch
+// certificate will be used.
+//
+optional<vector<vector<uint8_t>>> createAttestation(
+        const EVP_PKEY* key, const vector<uint8_t>& applicationId, const vector<uint8_t>& challenge,
+        uint64_t activeTimeMilliSeconds, uint64_t expireTimeMilliSeconds, bool isTestCredential) {
+    const keymaster_cert_chain_t* attestation_chain =
+            ::keymaster::getAttestationChain(KM_ALGORITHM_EC, nullptr);
+    if (attestation_chain == nullptr) {
+        LOG(ERROR) << "Error getting attestation chain";
+        return {};
+    }
+    if (expireTimeMilliSeconds == 0) {
+        if (attestation_chain->entry_count < 1) {
+            LOG(ERROR) << "Expected at least one entry in attestation chain";
+            return {};
+        }
+        keymaster_blob_t* bcBlob = &(attestation_chain->entries[0]);
+        const uint8_t* bcData = bcBlob->data;
+        auto bc = X509_Ptr(d2i_X509(nullptr, &bcData, bcBlob->data_length));
+        time_t bcNotAfter;
+        if (!parseAsn1Time(X509_get0_notAfter(bc.get()), &bcNotAfter)) {
+            LOG(ERROR) << "Error getting notAfter from batch certificate";
+            return {};
+        }
+        expireTimeMilliSeconds = bcNotAfter * 1000;
+    }
+    const keymaster_key_blob_t* attestation_signing_key =
+            ::keymaster::getAttestationKey(KM_ALGORITHM_EC, nullptr);
+    if (attestation_signing_key == nullptr) {
+        LOG(ERROR) << "Error getting attestation key";
+        return {};
+    }
+
+    ::keymaster::X509_NAME_Ptr subjectName;
+    if (KM_ERROR_OK !=
+        ::keymaster::make_name_from_str("Android Identity Credential Key", &subjectName)) {
+        LOG(ERROR) << "Cannot create attestation subject";
+        return {};
+    }
+
+    vector<uint8_t> subject(i2d_X509_NAME(subjectName.get(), NULL));
+    unsigned char* subjectPtr = subject.data();
+
+    i2d_X509_NAME(subjectName.get(), &subjectPtr);
+
     ::keymaster::AuthorizationSet auth_set(
             ::keymaster::AuthorizationSetBuilder()
                     .Authorization(::keymaster::TAG_ATTESTATION_CHALLENGE, challenge.data(),
@@ -894,6 +989,8 @@
                     // includes app id.
                     .Authorization(::keymaster::TAG_ATTESTATION_APPLICATION_ID,
                                    applicationId.data(), applicationId.size())
+                    .Authorization(::keymaster::TAG_CERTIFICATE_SUBJECT, subject.data(),
+                                   subject.size())
                     .Authorization(::keymaster::TAG_USAGE_EXPIRE_DATETIME, expireTimeMilliSeconds));
 
     // Unique id and device id is not applicable for identity credential attestation,
@@ -901,7 +998,7 @@
     ::keymaster::AuthorizationSet swEnforced(::keymaster::AuthorizationSetBuilder().Authorization(
             ::keymaster::TAG_CREATION_DATETIME, activeTimeMilliSeconds));
 
-    ::keymaster::AuthorizationSet hwEnforced(
+    ::keymaster::AuthorizationSetBuilder hwEnforcedBuilder =
             ::keymaster::AuthorizationSetBuilder()
                     .Authorization(::keymaster::TAG_PURPOSE, KM_PURPOSE_SIGN)
                     .Authorization(::keymaster::TAG_KEY_SIZE, 256)
@@ -909,34 +1006,29 @@
                     .Authorization(::keymaster::TAG_NO_AUTH_REQUIRED)
                     .Authorization(::keymaster::TAG_DIGEST, KM_DIGEST_SHA_2_256)
                     .Authorization(::keymaster::TAG_EC_CURVE, KM_EC_CURVE_P_256)
-                    .Authorization(::keymaster::TAG_IDENTITY_CREDENTIAL_KEY));
+                    .Authorization(::keymaster::TAG_OS_VERSION, 42)
+                    .Authorization(::keymaster::TAG_OS_PATCHLEVEL, 43);
 
-    const keymaster_cert_chain_t* attestation_chain =
-            ::keymaster::getAttestationChain(KM_ALGORITHM_EC, nullptr);
-
-    if (attestation_chain == nullptr) {
-        LOG(ERROR) << "Error getting attestation chain";
-        return {};
+    // Only include TAG_IDENTITY_CREDENTIAL_KEY if it's not a test credential
+    if (!isTestCredential) {
+        hwEnforcedBuilder.Authorization(::keymaster::TAG_IDENTITY_CREDENTIAL_KEY);
     }
-
-    const keymaster_key_blob_t* attestation_signing_key =
-            ::keymaster::getAttestationKey(KM_ALGORITHM_EC, nullptr);
-    if (attestation_signing_key == nullptr) {
-        LOG(ERROR) << "Error getting attestation key";
-        return {};
-    }
+    ::keymaster::AuthorizationSet hwEnforced(hwEnforcedBuilder);
 
     keymaster_error_t error;
     ::keymaster::CertChainPtr cert_chain_out;
-    ::keymaster::PureSoftKeymasterContext context;
 
-    // set identity version to 10 per hal requirements specified in IWriteableCredential.hal
-    // For now, the identity version in the attestation is set in the keymaster
-    // version field in the portable keymaster lib, which is a bit misleading.
-    uint identity_version = 10;
+    // Pretend to be implemented in a trusted environment just so we can pass
+    // the VTS tests. Of course, this is a pretend-only game since hopefully no
+    // relying party is ever going to trust our batch key and those keys above
+    // it.
+    //
+    ::keymaster::PureSoftKeymasterContext context(::keymaster::KmVersion::KEYMASTER_4_1,
+                                                  KM_SECURITY_LEVEL_TRUSTED_ENVIRONMENT);
+
     error = generate_attestation_from_EVP(key, swEnforced, hwEnforced, auth_set, context,
-                                          identity_version, *attestation_chain,
-                                          *attestation_signing_key, &cert_chain_out);
+                                          *attestation_chain, *attestation_signing_key,
+                                          &cert_chain_out);
 
     if (KM_ERROR_OK != error || !cert_chain_out) {
         LOG(ERROR) << "Error generate attestation from EVP key" << error;
@@ -957,7 +1049,8 @@
 }
 
 optional<std::pair<vector<uint8_t>, vector<vector<uint8_t>>>> createEcKeyPairAndAttestation(
-        const vector<uint8_t>& challenge, const vector<uint8_t>& applicationId) {
+        const vector<uint8_t>& challenge, const vector<uint8_t>& applicationId,
+        bool isTestCredential) {
     auto ec_key = ::keymaster::EC_KEY_Ptr(EC_KEY_new());
     auto pkey = ::keymaster::EVP_PKEY_Ptr(EVP_PKEY_new());
     auto group = ::keymaster::EC_GROUP_Ptr(EC_GROUP_new_by_curve_name(NID_X9_62_prime256v1));
@@ -978,12 +1071,11 @@
         return {};
     }
 
-    uint64_t now = time(nullptr);
-    uint64_t secondsInOneYear = 365 * 24 * 60 * 60;
-    uint64_t expireTimeMs = (now + secondsInOneYear) * 1000;
+    uint64_t nowMs = time(nullptr) * 1000;
+    uint64_t expireTimeMs = 0;  // Set to same as batch certificate
 
-    optional<vector<vector<uint8_t>>> attestationCert =
-            createAttestation(pkey.get(), applicationId, challenge, now * 1000, expireTimeMs);
+    optional<vector<vector<uint8_t>>> attestationCert = createAttestation(
+            pkey.get(), applicationId, challenge, nowMs, expireTimeMs, isTestCredential);
     if (!attestationCert) {
         LOG(ERROR) << "Error create attestation from key and challenge";
         return {};
@@ -1031,14 +1123,12 @@
         return {};
     }
 
-    uint64_t now = (std::chrono::duration_cast<std::chrono::nanoseconds>(
-                    std::chrono::system_clock::now().time_since_epoch()).
-                    count()/ 1000000000);
-    uint64_t secondsInOneYear = 365 * 24 * 60 * 60;
-    uint64_t expireTimeMs = (now + secondsInOneYear) * 1000;
+    uint64_t nowMs = time(nullptr) * 1000;
+    uint64_t expireTimeMs = 0;  // Set to same as batch certificate
 
     optional<vector<vector<uint8_t>>> attestationCert =
-            createAttestation(pkey.get(), applicationId, challenge, now * 1000, expireTimeMs);
+            createAttestation(pkey.get(), applicationId, challenge, nowMs, expireTimeMs,
+                              false /* isTestCredential */);
     if (!attestationCert) {
         LOG(ERROR) << "Error create attestation from key and challenge";
         return {};
@@ -1646,6 +1736,32 @@
     return std::make_pair(tbsCertificateOffset, tbsCertificateSize);
 }
 
+optional<pair<time_t, time_t>> certificateGetValidity(const vector<uint8_t>& x509Certificate) {
+    vector<X509_Ptr> certs;
+    if (!parseX509Certificates(x509Certificate, certs)) {
+        LOG(ERROR) << "Error parsing certificates";
+        return {};
+    }
+    if (certs.size() < 1) {
+        LOG(ERROR) << "No certificates in chain";
+        return {};
+    }
+
+    time_t notBefore;
+    time_t notAfter;
+    if (!parseAsn1Time(X509_get0_notBefore(certs[0].get()), &notBefore)) {
+        LOG(ERROR) << "Error parsing notBefore";
+        return {};
+    }
+
+    if (!parseAsn1Time(X509_get0_notAfter(certs[0].get()), &notAfter)) {
+        LOG(ERROR) << "Error parsing notAfter";
+        return {};
+    }
+
+    return std::make_pair(notBefore, notAfter);
+}
+
 optional<pair<size_t, size_t>> certificateFindSignature(const vector<uint8_t>& x509Certificate) {
     vector<X509_Ptr> certs;
     if (!parseX509Certificates(x509Certificate, certs)) {
@@ -2218,6 +2334,49 @@
 // Utility functions specific to IdentityCredential.
 // ---------------------------------------------------------------------------
 
+optional<vector<uint8_t>> calcEMacKey(const vector<uint8_t>& privateKey,
+                                      const vector<uint8_t>& publicKey,
+                                      const vector<uint8_t>& sessionTranscriptBytes) {
+    optional<vector<uint8_t>> sharedSecret = support::ecdh(publicKey, privateKey);
+    if (!sharedSecret) {
+        LOG(ERROR) << "Error performing ECDH";
+        return {};
+    }
+    vector<uint8_t> salt = support::sha256(sessionTranscriptBytes);
+    vector<uint8_t> info = {'E', 'M', 'a', 'c', 'K', 'e', 'y'};
+    optional<vector<uint8_t>> derivedKey = support::hkdf(sharedSecret.value(), salt, info, 32);
+    if (!derivedKey) {
+        LOG(ERROR) << "Error performing HKDF";
+        return {};
+    }
+    return derivedKey.value();
+}
+
+optional<vector<uint8_t>> calcMac(const vector<uint8_t>& sessionTranscriptEncoded,
+                                  const string& docType,
+                                  const vector<uint8_t>& deviceNameSpacesEncoded,
+                                  const vector<uint8_t>& eMacKey) {
+    auto [sessionTranscriptItem, _, errMsg] = cppbor::parse(sessionTranscriptEncoded);
+    if (sessionTranscriptItem == nullptr) {
+        LOG(ERROR) << "Error parsing sessionTranscriptEncoded: " << errMsg;
+        return {};
+    }
+    // The data that is MACed is ["DeviceAuthentication", sessionTranscript, docType,
+    // deviceNameSpacesBytes] so build up that structure
+    cppbor::Array deviceAuthentication =
+            cppbor::Array()
+                    .add("DeviceAuthentication")
+                    .add(std::move(sessionTranscriptItem))
+                    .add(docType)
+                    .add(cppbor::Semantic(kSemanticTagEncodedCbor, deviceNameSpacesEncoded));
+    vector<uint8_t> deviceAuthenticationBytes =
+            cppbor::Semantic(kSemanticTagEncodedCbor, deviceAuthentication.encode()).encode();
+    optional<vector<uint8_t>> calculatedMac =
+            support::coseMac0(eMacKey, {},                 // payload
+                              deviceAuthenticationBytes);  // detached content
+    return calculatedMac;
+}
+
 vector<vector<uint8_t>> chunkVector(const vector<uint8_t>& content, size_t maxChunkSize) {
     vector<vector<uint8_t>> ret;
 
@@ -2244,7 +2403,6 @@
     return ret;
 }
 
-
 vector<uint8_t> testHardwareBoundKey = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
 
 const vector<uint8_t>& getTestHardwareBoundKey() {
diff --git a/identity/support/tests/IdentityCredentialSupportTest.cpp b/identity/support/tests/IdentityCredentialSupportTest.cpp
index c356549..266f263 100644
--- a/identity/support/tests/IdentityCredentialSupportTest.cpp
+++ b/identity/support/tests/IdentityCredentialSupportTest.cpp
@@ -436,6 +436,300 @@
             support::cborPrettyPrint(mac.value()));
 }
 
+// Generates a private key in DER format for a small value of 'd'.
+//
+// Used for test vectors.
+//
+vector<uint8_t> p256PrivateKeyFromD(uint8_t d) {
+    vector<uint8_t> privateUncompressed;
+    privateUncompressed.resize(32);
+    privateUncompressed[31] = d;
+    optional<vector<uint8_t>> privateKey = support::ecPrivateKeyToKeyPair(privateUncompressed);
+    return privateKey.value();
+}
+
+std::pair<vector<uint8_t>, vector<uint8_t>> p256PrivateKeyGetXandY(
+        const vector<uint8_t> privateKey) {
+    optional<vector<uint8_t>> publicUncompressed = support::ecKeyPairGetPublicKey(privateKey);
+    vector<uint8_t> x = vector<uint8_t>(publicUncompressed.value().begin() + 1,
+                                        publicUncompressed.value().begin() + 33);
+    vector<uint8_t> y = vector<uint8_t>(publicUncompressed.value().begin() + 33,
+                                        publicUncompressed.value().begin() + 65);
+    return std::make_pair(x, y);
+}
+
+const cppbor::Item* findValueForTstr(const cppbor::Map* map, const string& keyValue) {
+    // TODO: Need cast until libcppbor's Map::get() is marked as const
+    auto [item, found] = ((cppbor::Map*)map)->get(keyValue);
+    if (!found) {
+        return nullptr;
+    }
+    return item.get();
+}
+
+const cppbor::Array* findArrayValueForTstr(const cppbor::Map* map, const string& keyValue) {
+    const cppbor::Item* item = findValueForTstr(map, keyValue);
+    if (item == nullptr) {
+        return nullptr;
+    }
+    return item->asArray();
+}
+
+const cppbor::Map* findMapValueForTstr(const cppbor::Map* map, const string& keyValue) {
+    const cppbor::Item* item = findValueForTstr(map, keyValue);
+    if (item == nullptr) {
+        return nullptr;
+    }
+    return item->asMap();
+}
+
+const cppbor::Semantic* findSemanticValueForTstr(const cppbor::Map* map, const string& keyValue) {
+    const cppbor::Item* item = findValueForTstr(map, keyValue);
+    if (item == nullptr) {
+        return nullptr;
+    }
+    return item->asSemantic();
+}
+
+const std::string findStringValueForTstr(const cppbor::Map* map, const string& keyValue) {
+    const cppbor::Item* item = findValueForTstr(map, keyValue);
+    if (item == nullptr) {
+        return nullptr;
+    }
+    const cppbor::Tstr* tstr = item->asTstr();
+    if (tstr == nullptr) {
+        return "";
+    }
+    return tstr->value();
+}
+
+TEST(IdentityCredentialSupport, testVectors_18013_5) {
+    // This is a test against known vectors for ISO 18013-5.
+    //
+    // The objective of this test is to verify that support::calcEMacKey() and
+    // support::calcMac() agree with the given test vectors.
+    //
+
+    // We're given static device key:
+    //
+    //     x: 28412803729898893058558238221310261427084375743576167377786533380249859400145
+    //     y: 65403602826180996396520286939226973026599920614829401631985882360676038096704
+    //     d: 11
+    //
+    vector<uint8_t> deviceKey = p256PrivateKeyFromD(11);
+    auto [deviceKeyX, deviceKeyY] = p256PrivateKeyGetXandY(deviceKey);
+    EXPECT_EQ(support::encodeHex(deviceKeyX),
+              "3ed113b7883b4c590638379db0c21cda16742ed0255048bf433391d374bc21d1");
+    EXPECT_EQ(support::encodeHex(deviceKeyY),
+              "9099209accc4c8a224c843afa4f4c68a090d04da5e9889dae2f8eefce82a3740");
+
+    // We're given Ephemeral reader key:
+    //
+    //   x: 59535862115950685744176693329402396749019581632805653266809849538337418304154
+    //   y: 53776829996815113213100700404832701936765102413212294632483274374518863708344
+    //   d: 20
+    //
+    vector<uint8_t> ephemeralReaderKey = p256PrivateKeyFromD(20);
+    auto [ephemeralReaderKeyX, ephemeralReaderKeyY] = p256PrivateKeyGetXandY(ephemeralReaderKey);
+    EXPECT_EQ(support::encodeHex(ephemeralReaderKeyX),
+              "83a01a9378395bab9bcd6a0ad03cc56d56e6b19250465a94a234dc4c6b28da9a");
+    EXPECT_EQ(support::encodeHex(ephemeralReaderKeyY),
+              "76e49b6de2f73234ae6a5eb9d612b75c9f2202bb6923f54ff8240aaa86f640b8");
+    vector<uint8_t> ephemeralReaderKeyPublic =
+            support::ecKeyPairGetPublicKey(ephemeralReaderKey).value();
+
+    // We're given SessionEstablishment.
+    //
+    //   SessionEstablishment = {
+    //     "eReaderKey" : EReaderKeyBytes,
+    //     "data" : bstr ; Encrypted mdoc request
+    //   }
+    //
+    // Fish out EReaderKey from this.
+    //
+    // Note that the test vector below is incorrect insofar that it uses
+    // "eReaderKeyBytes" instead of just "eReaderKey". This will be corrected in
+    // the future.
+    //
+    optional<vector<uint8_t>> sessionEstablishmentEncoded = support::decodeHex(
+            "a26f655265616465724b65794279746573d818584ba40102200121582083a01a9378395bab9bcd6a0ad03c"
+            "c56d56e6b19250465a94a234dc4c6b28da9a22582076e49b6de2f73234ae6a5eb9d612b75c9f2202bb6923"
+            "f54ff8240aaa86f640b864646174615902d945b31040c57491acb6d46a71f6c1f67a0b837df1bda9089fd0"
+            "3d0b1fdac3eeb2874a4ef6f90c97d03397186ba00a91102faae7e992e15f761d5662c3c37e3c6c2cfd2ebc"
+            "0bf59dbb8795e377bd7dd353230a41ba2d82294b45871a39b42ca531f26b52f46e356fbaf5075c8fd5b8b0"
+            "8a0df4a1d2e1bdd2e5d69169c1efbb51e393e608d833d325bebfbccb2e15ec08f94b264582fa7b93f7cebc"
+            "aa69f4f0cac2744d4fe35b04df26b2ae69273eed33024949080c1c95a6ef046beede959e9494297dd770af"
+            "4ac6fdd56783aa012555c213dc05cf0f41d1c95119720fcfe1621027f80e2ddd56ea3c1fc596f7b2579333"
+            "5a887ec788092b4a69d23b6219e27d0249b50b3fdcb95b5227007689362e0416b3bae3dae7cb56b4394666"
+            "4e3a3f60dce8d0b678fcd754bebf87bd2b0278dd782d952488a46f2874e34c2dd97bb74084a62b850e9719"
+            "252cd1dca7dbf1858193f6cf093cb3735312bbe1138cf29d8f350e285923f8ef07065299926720b42264e8"
+            "fd5d4b133e72f47c4e999ea689c353f8b41e50a59838e1a0d09eca4a557f77a9c389a0591ad1639119ce86"
+            "edc3320130480ee5101effae6066e8c85aac9ead2ae83e49c1e508aab02f753decbb522ea2200d62fd5d26"
+            "094bd35100bffaa1cdc6af9f7e9cfe7b63da6b5671cd5ac2cf5da450c72addc64cde441f3b7f7fdaf930ad"
+            "1e13388e8a7308d8ca4607e59e082db431a232e7e12cb692baeb4b2127e110ff24cea322ffdbc2e4d9c4c6"
+            "bed27753137d07897c8613627a799a560cf1a2d1edb3de029442862940a5ed7785eea8b6ace93aa6af0792"
+            "fd82877f62d07b757d0179ecbb7347004ecc9c0690d41f75f188cb17ffd2cec2ad8c9675466bb33b737a2a"
+            "e7592b2dcb8132aced2e572266f3f5413a5f9d6d4339a1e4662622af2e7e157a4ea3bfd5c4247e2ec91d8c"
+            "5c3c17427d5edfae673d0e0f782a8d40fa805fd8bc82ae3cb21a65cdad863e02309f6b01d1753fa884b778"
+            "f6e019a2004d8964deeb11f1fd478fcb");
+    ASSERT_TRUE(sessionEstablishmentEncoded);
+    auto [sessionEstablishmentItem, _se, _se2] = cppbor::parse(sessionEstablishmentEncoded.value());
+    const cppbor::Map* sessionEstablishment = sessionEstablishmentItem->asMap();
+    ASSERT_NE(sessionEstablishment, nullptr);
+    const cppbor::Semantic* eReaderKeyBytes =
+            findSemanticValueForTstr(sessionEstablishment, "eReaderKeyBytes");
+    ASSERT_NE(eReaderKeyBytes, nullptr);
+    ASSERT_EQ(eReaderKeyBytes->value(), 24);
+    const cppbor::Bstr* eReaderKeyBstr = eReaderKeyBytes->child()->asBstr();
+    ASSERT_NE(eReaderKeyBstr, nullptr);
+    vector<uint8_t> eReaderKeyEncoded = eReaderKeyBstr->value();
+    // TODO: verify this agrees with ephemeralReaderKeyX and ephemeralReaderKeyY
+
+    // We're given DeviceEngagement.
+    //
+    vector<uint8_t> deviceEngagementEncoded =
+            support::decodeHex(
+                    "a20063312e30018201d818584ba401022001215820cef66d6b2a3a993e591214d1ea223fb545ca"
+                    "6c471c48306e4c36069404c5723f225820878662a229aaae906e123cdd9d3b4c10590ded29fe75"
+                    "1eeeca34bbaa44af0773")
+                    .value();
+
+    // Now calculate SessionTranscriptBytes. It is defined as
+    //
+    //   SessionTranscript = [
+    //      DeviceEngagementBytes,
+    //      EReaderKeyBytes,
+    //      Handover
+    //   ]
+    //
+    //   SessionTranscriptBytes = #6.24(bstr .cbor SessionTranscript)
+    //
+    cppbor::Array sessionTranscript;
+    sessionTranscript.add(cppbor::Semantic(24, deviceEngagementEncoded));
+    sessionTranscript.add(cppbor::Semantic(24, eReaderKeyEncoded));
+    sessionTranscript.add(cppbor::Null());
+    vector<uint8_t> sessionTranscriptEncoded = sessionTranscript.encode();
+    vector<uint8_t> sessionTranscriptBytes =
+            cppbor::Semantic(24, sessionTranscriptEncoded).encode();
+
+    // The expected EMacKey is 4c1ebb8aacc633465390fa44edfdb49cb57f2e079aaa771d812584699c0b97e2
+    //
+    // Verify that support::calcEMacKey() gets the same result.
+    //
+    optional<vector<uint8_t>> eMacKey =
+            support::calcEMacKey(support::ecKeyPairGetPrivateKey(deviceKey).value(),  // private key
+                                 ephemeralReaderKeyPublic,                            // public key
+                                 sessionTranscriptBytes);  // sessionTranscriptBytes
+    ASSERT_TRUE(eMacKey);
+    ASSERT_EQ(support::encodeHex(eMacKey.value()),
+              "4c1ebb8aacc633465390fa44edfdb49cb57f2e079aaa771d812584699c0b97e2");
+
+    // Also do it the other way around
+    //
+    optional<vector<uint8_t>> eMacKey2 = support::calcEMacKey(
+            support::ecKeyPairGetPrivateKey(ephemeralReaderKey).value(),  // private key
+            support::ecKeyPairGetPublicKey(deviceKey).value(),            // public key
+            sessionTranscriptBytes);                                      // sessionTranscriptBytes
+    ASSERT_TRUE(eMacKey2);
+    ASSERT_EQ(support::encodeHex(eMacKey2.value()),
+              "4c1ebb8aacc633465390fa44edfdb49cb57f2e079aaa771d812584699c0b97e2");
+
+    // We're given DeviceResponse
+    //
+    vector<uint8_t> deviceResponseEncoded =
+            support::decodeHex(
+                    "a36776657273696f6e63312e3069646f63756d656e747381a367646f6354797065756f72672e69"
+                    "736f2e31383031332e352e312e6d444c6c6973737565725369676e6564a26a6e616d6553706163"
+                    "6573a2716f72672e69736f2e31383031332e352e3181d8185863a4686469676573744944016672"
+                    "616e646f6d58208798645b20ea200e19ffabac92624bee6aec63aceedecfb1b80077d22bfc20e9"
+                    "71656c656d656e744964656e7469666965726b66616d696c795f6e616d656c656c656d656e7456"
+                    "616c756563446f656b636f6d2e6578616d706c6581d8185864a468646967657374494401667261"
+                    "6e646f6d5820218ecf13521b53f4b96abaebe56417afec0e4c91fc8fb26086cd1e5cdc1a94ff71"
+                    "656c656d656e744964656e7469666965726f616e6f746865725f656c656d656e746c656c656d65"
+                    "6e7456616c75650a6a697373756572417574688443a10126a118215901d2308201ce30820174a0"
+                    "0302010202141f7d44f4f107c5ee3f566049cf5d72de294b0d23300a06082a8648ce3d04030230"
+                    "233114301206035504030c0b75746f7069612069616361310b3009060355040613025553301e17"
+                    "0d3230313030313030303030305a170d3231313030313030303030305a30213112301006035504"
+                    "030c0975746f706961206473310b30090603550406130255533059301306072a8648ce3d020106"
+                    "082a8648ce3d03010703420004301d9e502dc7e05da85da026a7ae9aa0fac9db7d52a95b3e3e3f"
+                    "9aa0a1b45b8b6551b6f6b3061223e0d23c026b017d72298d9ae46887ca61d58db6aea17ee267a3"
+                    "8187308184301e0603551d120417301581136578616d706c65406578616d706c652e636f6d301c"
+                    "0603551d1f041530133011a00fa00d820b6578616d706c652e636f6d301d0603551d0e04160414"
+                    "7bef4db59a1ffb07592bfc57f4743b8a73aea792300e0603551d0f0101ff040403020780301506"
+                    "03551d250101ff040b3009060728818c5d050102300a06082a8648ce3d04030203480030450220"
+                    "21d52fb1fbda80e5bfda1e8dfb1bc7bf0acb7261d5c9ff54425af76eb21571c602210082bf301f"
+                    "89e0a2cb9ca9c9050352de80b47956764f7a3e07bf6a8cd87528a3b55901d2d8185901cda66776"
+                    "657273696f6e63312e306f646967657374416c676f726974686d675348412d3235366c76616c75"
+                    "6544696765737473a2716f72672e69736f2e31383031332e352e31a20058203b22af1126771f02"
+                    "f0ea0d546d4ee3c5b51637381154f5211b79daf5f9facaa8015820f2cba0ce3cde5df901a3da75"
+                    "13a4d7f7225fdfe5a306544529bf3dbcce655ca06b636f6d2e6578616d706c65a200582072636d"
+                    "ddc282424a63499f4b3927aaa3b74da7b9c0134178bf735e949e4a761e01582006322d3cbe6603"
+                    "876bdacc5b6679b51b0fc53d029c244fd5ea719d9028459c916d6465766963654b6579496e666f"
+                    "a1696465766963654b6579a4010220012158203ed113b7883b4c590638379db0c21cda16742ed0"
+                    "255048bf433391d374bc21d12258209099209accc4c8a224c843afa4f4c68a090d04da5e9889da"
+                    "e2f8eefce82a374067646f6354797065756f72672e69736f2e31383031332e352e312e6d444c6c"
+                    "76616c6964697479496e666fa3667369676e6564c074323032302d31302d30315431333a33303a"
+                    "30325a6976616c696446726f6dc074323032302d31302d30315431333a33303a30325a6a76616c"
+                    "6964556e74696cc074323032312d31302d30315431333a33303a30325a5840273ec1b59817d571"
+                    "b5a2c5c0ab0ea213d42acb18547fd7097afcc888a22ecbb863c6461ce0e240880895b4aaa84308"
+                    "784571c7be7aa3a2e7e3a2ea1a145ed1966c6465766963655369676e6564a26a6e616d65537061"
+                    "636573d81841a06a64657669636541757468a1696465766963654d61638443a10105a0f6582009"
+                    "da7c964ac004ec36ec64edd0c1abf50c03433c215c3ddb144768abcdf20a60667374617475730"
+                    "0")
+                    .value();
+    auto [deviceResponseItem, _, _2] = cppbor::parse(deviceResponseEncoded);
+    const cppbor::Map* deviceResponse = deviceResponseItem->asMap();
+    ASSERT_NE(deviceResponse, nullptr);
+    const cppbor::Array* documents = findArrayValueForTstr(deviceResponse, "documents");
+    ASSERT_NE(documents, nullptr);
+    ASSERT_EQ(documents->size(), 1);
+    const cppbor::Map* document = ((*documents)[0])->asMap();
+    ASSERT_NE(document, nullptr);
+
+    // Get docType
+    string docType = findStringValueForTstr(document, "docType");
+    ASSERT_EQ(docType, "org.iso.18013.5.1.mDL");
+
+    // Drill down...
+    const cppbor::Map* deviceSigned = findMapValueForTstr(document, "deviceSigned");
+    ASSERT_NE(deviceSigned, nullptr);
+
+    // Dig out the encoded form of DeviceNameSpaces
+    //
+    const cppbor::Semantic* deviceNameSpacesBytes =
+            findSemanticValueForTstr(deviceSigned, "nameSpaces");
+    ASSERT_NE(deviceNameSpacesBytes, nullptr);
+    ASSERT_EQ(deviceNameSpacesBytes->value(), 24);
+    const cppbor::Bstr* deviceNameSpacesBstr = deviceNameSpacesBytes->child()->asBstr();
+    ASSERT_NE(deviceNameSpacesBstr, nullptr);
+    vector<uint8_t> deviceNameSpacesEncoded = deviceNameSpacesBstr->value();
+
+    // (For this version of 18013-5, DeviceNameSpaces is always supposed to be empty, check that.)
+    EXPECT_EQ(deviceNameSpacesEncoded, cppbor::Map().encode());
+
+    const cppbor::Map* deviceAuth = findMapValueForTstr(deviceSigned, "deviceAuth");
+    ASSERT_NE(deviceAuth, nullptr);
+    // deviceMac is is the COSE_Mac0.. dig out the encoded form to check that
+    // support::calcMac() gives exactly the same bytes.
+    //
+    const cppbor::Array* deviceMac = findArrayValueForTstr(deviceAuth, "deviceMac");
+    ASSERT_NE(deviceMac, nullptr);
+    vector<uint8_t> deviceMacEncoded = deviceMac->encode();
+
+    // Now we calculate what it should be..
+    optional<vector<uint8_t>> calculatedMac =
+            support::calcMac(sessionTranscriptEncoded,  // SessionTranscript
+                             docType,                   // DocType
+                             deviceNameSpacesEncoded,   // DeviceNamespaces
+                             eMacKey.value());          // EMacKey
+    ASSERT_TRUE(calculatedMac);
+
+    // ... and hopefully it's the same!
+    ASSERT_EQ(calculatedMac.value().size(), deviceMacEncoded.size());
+    EXPECT_TRUE(memcmp(calculatedMac.value().data(), deviceMacEncoded.data(),
+                       deviceMacEncoded.size()) == 0);
+}
+
 }  // namespace identity
 }  // namespace hardware
 }  // namespace android
diff --git a/keymaster/3.0/IKeymasterDevice.hal b/keymaster/3.0/IKeymasterDevice.hal
index 2664765..9bd8602 100644
--- a/keymaster/3.0/IKeymasterDevice.hal
+++ b/keymaster/3.0/IKeymasterDevice.hal
@@ -20,6 +20,7 @@
  * Keymaster device definition.  For thorough documentation see the implementer's reference, at
  * https://source.android.com/security/keystore/implementer-ref.html
  */
+@SensitiveData
 interface IKeymasterDevice {
 
     /**
diff --git a/keymaster/4.0/IKeymasterDevice.hal b/keymaster/4.0/IKeymasterDevice.hal
index 3475f79..dfde060 100644
--- a/keymaster/4.0/IKeymasterDevice.hal
+++ b/keymaster/4.0/IKeymasterDevice.hal
@@ -195,7 +195,7 @@
  * Tag::VENDOR_PATCHLEVEL, and Tag::BOOT_PATCHLEVEL must be cryptographically bound to every
  * IKeymasterDevice key, as described in the Key Access Control section above.
  */
-
+@SensitiveData
 interface IKeymasterDevice {
 
     /**
diff --git a/keymaster/4.1/IKeymasterDevice.hal b/keymaster/4.1/IKeymasterDevice.hal
index bbeccaa..ccb9f2e 100644
--- a/keymaster/4.1/IKeymasterDevice.hal
+++ b/keymaster/4.1/IKeymasterDevice.hal
@@ -37,6 +37,7 @@
  * versions will be numbered as major_version * 10 + minor version.  The addition of new attestable
  * tags changes the attestation format again, slightly, so the attestationVersion must be 4.
  */
+@SensitiveData
 interface IKeymasterDevice extends @4.0::IKeymasterDevice {
     /**
      * Called by client to notify the IKeymasterDevice that the device is now locked, and keys with
diff --git a/keymaster/4.1/support/attestation_record.cpp b/keymaster/4.1/support/attestation_record.cpp
index 598b6b5..207a7e8 100644
--- a/keymaster/4.1/support/attestation_record.cpp
+++ b/keymaster/4.1/support/attestation_record.cpp
@@ -102,6 +102,7 @@
     ASN1_INTEGER* boot_patchlevel;
     ASN1_NULL* early_boot_only;
     ASN1_NULL* device_unique_attestation;
+    ASN1_NULL* identity_credential_key;
 } KM_AUTH_LIST;
 
 ASN1_SEQUENCE(KM_AUTH_LIST) = {
@@ -145,6 +146,8 @@
         ASN1_EXP_OPT(KM_AUTH_LIST, early_boot_only, ASN1_NULL, TAG_EARLY_BOOT_ONLY.maskedTag()),
         ASN1_EXP_OPT(KM_AUTH_LIST, device_unique_attestation, ASN1_NULL,
                      TAG_DEVICE_UNIQUE_ATTESTATION.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, identity_credential_key, ASN1_NULL,
+                     TAG_IDENTITY_CREDENTIAL_KEY.maskedTag()),
 } ASN1_SEQUENCE_END(KM_AUTH_LIST);
 IMPLEMENT_ASN1_FUNCTIONS(KM_AUTH_LIST);
 
@@ -285,6 +288,7 @@
     copyAuthTag(record->unlocked_device_required, TAG_UNLOCKED_DEVICE_REQUIRED, auth_list);
     copyAuthTag(record->early_boot_only, TAG_EARLY_BOOT_ONLY, auth_list);
     copyAuthTag(record->device_unique_attestation, TAG_DEVICE_UNIQUE_ATTESTATION, auth_list);
+    copyAuthTag(record->identity_credential_key, TAG_IDENTITY_CREDENTIAL_KEY, auth_list);
 
     return ErrorCode::OK;
 }
@@ -327,7 +331,10 @@
 
     p = attest_rec->data;
     KM_KEY_DESCRIPTION_Ptr record(d2i_KM_KEY_DESCRIPTION(nullptr, &p, attest_rec->length));
-    if (!record.get()) return {ErrorCode::UNKNOWN_ERROR, {}};
+    if (!record.get()) {
+        LOG(ERROR) << "Unable to get key description";
+        return {ErrorCode::UNKNOWN_ERROR, {}};
+    }
 
     AttestationRecord result;
 
@@ -352,10 +359,12 @@
     if (error != ErrorCode::OK) return {error, {}};
 
     KM_ROOT_OF_TRUST* root_of_trust = nullptr;
+    SecurityLevel root_of_trust_security_level = SecurityLevel::TRUSTED_ENVIRONMENT;
     if (record->tee_enforced && record->tee_enforced->root_of_trust) {
         root_of_trust = record->tee_enforced->root_of_trust;
     } else if (record->software_enforced && record->software_enforced->root_of_trust) {
         root_of_trust = record->software_enforced->root_of_trust;
+        root_of_trust_security_level = SecurityLevel::SOFTWARE;
     } else {
         LOG(ERROR) << AT << " Failed root of trust parsing";
         return {ErrorCode::INVALID_ARGUMENT, {}};
@@ -373,6 +382,7 @@
     rot.verified_boot_state = static_cast<keymaster_verified_boot_t>(
             ASN1_ENUMERATED_get(root_of_trust->verified_boot_state));
     rot.device_locked = root_of_trust->device_locked;
+    rot.security_level = root_of_trust_security_level;
 
     auto& vb_hash = root_of_trust->verified_boot_hash;
     if (!vb_hash) {
diff --git a/keymaster/aidl/Android.bp b/keymaster/aidl/Android.bp
index 5206721..56a3ca9 100644
--- a/keymaster/aidl/Android.bp
+++ b/keymaster/aidl/Android.bp
@@ -20,12 +20,3 @@
         "2",
     ],
 }
-
-// This is a reminder that the next version of keymaster should be frozen at
-// version "5" to avoid confusion with other versions of this interface.
-cc_library {
-    name: "android.hardware.keymaster-V3-java",
-}
-cc_library {
-    name: "android.hardware.keymaster-V4-java",
-}
diff --git a/keymaster/aidl/android/hardware/keymaster/SecurityLevel.aidl b/keymaster/aidl/android/hardware/keymaster/SecurityLevel.aidl
index f129783..00578a4 100644
--- a/keymaster/aidl/android/hardware/keymaster/SecurityLevel.aidl
+++ b/keymaster/aidl/android/hardware/keymaster/SecurityLevel.aidl
@@ -1,5 +1,5 @@
 /*
- * Copyright 2020 The Android Open Source Project
+ * Copyright (C) 2020 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
diff --git a/keymaster/aidl/android/hardware/keymaster/Timestamp.aidl b/keymaster/aidl/android/hardware/keymaster/Timestamp.aidl
index 4b2f108..19ea944 100644
--- a/keymaster/aidl/android/hardware/keymaster/Timestamp.aidl
+++ b/keymaster/aidl/android/hardware/keymaster/Timestamp.aidl
@@ -16,6 +16,14 @@
 
 package android.hardware.keymaster;
 
+
+/**
+ * Time in milliseconds since some arbitrary point in time.  Time must be monotonically increasing,
+ * and a secure environment's notion of "current time" must not repeat until the Android device
+ * reboots, or until at least 50 million years have elapsed (note that this requirement is satisfied
+ * by setting the clock to zero during each boot, and then counting time accurately).
+ */
+
 @VintfStability
 parcelable Timestamp {
     long milliSeconds;
diff --git a/keymaster/aidl/android/hardware/keymaster/VerificationToken.aidl b/keymaster/aidl/android/hardware/keymaster/VerificationToken.aidl
index eff9ca6..f053254 100644
--- a/keymaster/aidl/android/hardware/keymaster/VerificationToken.aidl
+++ b/keymaster/aidl/android/hardware/keymaster/VerificationToken.aidl
@@ -1,5 +1,5 @@
 /*
- * Copyright 2020 The Android Open Source Project
+ * Copyright (C) 2020 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -18,7 +18,6 @@
 
 import android.hardware.keymaster.SecurityLevel;
 import android.hardware.keymaster.Timestamp;
-import android.hardware.keymaster.HardwareAuthenticatorType;
 
 /**
  * VerificationToken instances are used for secure environments to authenticate one another.
@@ -40,6 +39,7 @@
      */
     Timestamp timestamp;
 
+
     /**
      * SecurityLevel of the secure environment that generated the token.
      */
diff --git a/keymint/aidl/Android.bp b/keymint/aidl/Android.bp
new file mode 100644
index 0000000..0dae527
--- /dev/null
+++ b/keymint/aidl/Android.bp
@@ -0,0 +1,21 @@
+aidl_interface {
+    name: "android.hardware.keymint",
+    vendor_available: true,
+    srcs: [
+        "android/hardware/keymint/*.aidl",
+    ],
+    stability: "vintf",
+    backend: {
+        java: {
+            sdk_version: "module_current",
+        },
+        ndk: {
+            vndk: {
+                enabled: true,
+            },
+        },
+        rust: {
+            enabled: true,
+        },
+    },
+}
diff --git a/keymint/aidl/OWNERS b/keymint/aidl/OWNERS
new file mode 100644
index 0000000..5c79db8
--- /dev/null
+++ b/keymint/aidl/OWNERS
@@ -0,0 +1,3 @@
+jdanis@google.com
+seleneh@google.com
+swillden@google.com
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Algorithm.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Algorithm.aidl
new file mode 100644
index 0000000..f51a412
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Algorithm.aidl
@@ -0,0 +1,26 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum Algorithm {
+  RSA = 1,
+  EC = 3,
+  AES = 32,
+  TRIPLE_DES = 33,
+  HMAC = 128,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/BeginResult.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/BeginResult.aidl
new file mode 100644
index 0000000..2f56be6
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/BeginResult.aidl
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable BeginResult {
+  long challenge;
+  android.hardware.keymint.KeyParameter[] params;
+  android.hardware.keymint.IKeyMintOperation operation;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/BlockMode.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/BlockMode.aidl
new file mode 100644
index 0000000..94de930
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/BlockMode.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum BlockMode {
+  ECB = 1,
+  CBC = 2,
+  CTR = 3,
+  GCM = 32,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/ByteArray.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/ByteArray.aidl
new file mode 100644
index 0000000..2dc22a9
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/ByteArray.aidl
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable ByteArray {
+  byte[] data;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Certificate.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Certificate.aidl
new file mode 100644
index 0000000..ca55054
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Certificate.aidl
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable Certificate {
+  byte[] encodedCertificate;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Digest.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Digest.aidl
new file mode 100644
index 0000000..cc4d2fd
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Digest.aidl
@@ -0,0 +1,28 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum Digest {
+  NONE = 0,
+  MD5 = 1,
+  SHA1 = 2,
+  SHA_2_224 = 3,
+  SHA_2_256 = 4,
+  SHA_2_384 = 5,
+  SHA_2_512 = 6,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/EcCurve.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/EcCurve.aidl
new file mode 100644
index 0000000..4e446ad
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/EcCurve.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum EcCurve {
+  P_224 = 0,
+  P_256 = 1,
+  P_384 = 2,
+  P_521 = 3,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/ErrorCode.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/ErrorCode.aidl
new file mode 100644
index 0000000..2679243
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/ErrorCode.aidl
@@ -0,0 +1,100 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum ErrorCode {
+  OK = 0,
+  ROOT_OF_TRUST_ALREADY_SET = -1,
+  UNSUPPORTED_PURPOSE = -2,
+  INCOMPATIBLE_PURPOSE = -3,
+  UNSUPPORTED_ALGORITHM = -4,
+  INCOMPATIBLE_ALGORITHM = -5,
+  UNSUPPORTED_KEY_SIZE = -6,
+  UNSUPPORTED_BLOCK_MODE = -7,
+  INCOMPATIBLE_BLOCK_MODE = -8,
+  UNSUPPORTED_MAC_LENGTH = -9,
+  UNSUPPORTED_PADDING_MODE = -10,
+  INCOMPATIBLE_PADDING_MODE = -11,
+  UNSUPPORTED_DIGEST = -12,
+  INCOMPATIBLE_DIGEST = -13,
+  INVALID_EXPIRATION_TIME = -14,
+  INVALID_USER_ID = -15,
+  INVALID_AUTHORIZATION_TIMEOUT = -16,
+  UNSUPPORTED_KEY_FORMAT = -17,
+  INCOMPATIBLE_KEY_FORMAT = -18,
+  UNSUPPORTED_KEY_ENCRYPTION_ALGORITHM = -19,
+  UNSUPPORTED_KEY_VERIFICATION_ALGORITHM = -20,
+  INVALID_INPUT_LENGTH = -21,
+  KEY_EXPORT_OPTIONS_INVALID = -22,
+  DELEGATION_NOT_ALLOWED = -23,
+  KEY_NOT_YET_VALID = -24,
+  KEY_EXPIRED = -25,
+  KEY_USER_NOT_AUTHENTICATED = -26,
+  OUTPUT_PARAMETER_NULL = -27,
+  INVALID_OPERATION_HANDLE = -28,
+  INSUFFICIENT_BUFFER_SPACE = -29,
+  VERIFICATION_FAILED = -30,
+  TOO_MANY_OPERATIONS = -31,
+  UNEXPECTED_NULL_POINTER = -32,
+  INVALID_KEY_BLOB = -33,
+  IMPORTED_KEY_NOT_ENCRYPTED = -34,
+  IMPORTED_KEY_DECRYPTION_FAILED = -35,
+  IMPORTED_KEY_NOT_SIGNED = -36,
+  IMPORTED_KEY_VERIFICATION_FAILED = -37,
+  INVALID_ARGUMENT = -38,
+  UNSUPPORTED_TAG = -39,
+  INVALID_TAG = -40,
+  MEMORY_ALLOCATION_FAILED = -41,
+  IMPORT_PARAMETER_MISMATCH = -44,
+  SECURE_HW_ACCESS_DENIED = -45,
+  OPERATION_CANCELLED = -46,
+  CONCURRENT_ACCESS_CONFLICT = -47,
+  SECURE_HW_BUSY = -48,
+  SECURE_HW_COMMUNICATION_FAILED = -49,
+  UNSUPPORTED_EC_FIELD = -50,
+  MISSING_NONCE = -51,
+  INVALID_NONCE = -52,
+  MISSING_MAC_LENGTH = -53,
+  KEY_RATE_LIMIT_EXCEEDED = -54,
+  CALLER_NONCE_PROHIBITED = -55,
+  KEY_MAX_OPS_EXCEEDED = -56,
+  INVALID_MAC_LENGTH = -57,
+  MISSING_MIN_MAC_LENGTH = -58,
+  UNSUPPORTED_MIN_MAC_LENGTH = -59,
+  UNSUPPORTED_KDF = -60,
+  UNSUPPORTED_EC_CURVE = -61,
+  KEY_REQUIRES_UPGRADE = -62,
+  ATTESTATION_CHALLENGE_MISSING = -63,
+  KEYMINT_NOT_CONFIGURED = -64,
+  ATTESTATION_APPLICATION_ID_MISSING = -65,
+  CANNOT_ATTEST_IDS = -66,
+  ROLLBACK_RESISTANCE_UNAVAILABLE = -67,
+  HARDWARE_TYPE_UNAVAILABLE = -68,
+  PROOF_OF_PRESENCE_REQUIRED = -69,
+  CONCURRENT_PROOF_OF_PRESENCE_REQUESTED = -70,
+  NO_USER_CONFIRMATION = -71,
+  DEVICE_LOCKED = -72,
+  EARLY_BOOT_ENDED = -73,
+  ATTESTATION_KEYS_NOT_PROVISIONED = -74,
+  ATTESTATION_IDS_NOT_PROVISIONED = -75,
+  INVALID_OPERATION = -76,
+  STORAGE_KEY_UNSUPPORTED = -77,
+  UNIMPLEMENTED = -100,
+  VERSION_MISMATCH = -101,
+  UNKNOWN_ERROR = -1000,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/HardwareAuthToken.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/HardwareAuthToken.aidl
new file mode 100644
index 0000000..1f5f8e9
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/HardwareAuthToken.aidl
@@ -0,0 +1,27 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable HardwareAuthToken {
+  long challenge;
+  long userId;
+  long authenticatorId;
+  android.hardware.keymint.HardwareAuthenticatorType authenticatorType;
+  android.hardware.keymint.Timestamp timestamp;
+  byte[] mac;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/HardwareAuthenticatorType.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/HardwareAuthenticatorType.aidl
new file mode 100644
index 0000000..95ec5c5
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/HardwareAuthenticatorType.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum HardwareAuthenticatorType {
+  NONE = 0,
+  PASSWORD = 1,
+  FINGERPRINT = 2,
+  ANY = -1,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/IKeyMintDevice.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/IKeyMintDevice.aidl
new file mode 100644
index 0000000..1616622
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/IKeyMintDevice.aidl
@@ -0,0 +1,33 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+interface IKeyMintDevice {
+  android.hardware.keymint.KeyMintHardwareInfo getHardwareInfo();
+  android.hardware.keymint.VerificationToken verifyAuthorization(in long challenge, in android.hardware.keymint.HardwareAuthToken token);
+  void addRngEntropy(in byte[] data);
+  void generateKey(in android.hardware.keymint.KeyParameter[] keyParams, out android.hardware.keymint.ByteArray generatedKeyBlob, out android.hardware.keymint.KeyCharacteristics generatedKeyCharacteristics, out android.hardware.keymint.Certificate[] outCertChain);
+  void importKey(in android.hardware.keymint.KeyParameter[] inKeyParams, in android.hardware.keymint.KeyFormat inKeyFormat, in byte[] inKeyData, out android.hardware.keymint.ByteArray outImportedKeyBlob, out android.hardware.keymint.KeyCharacteristics outImportedKeyCharacteristics, out android.hardware.keymint.Certificate[] outCertChain);
+  void importWrappedKey(in byte[] inWrappedKeyData, in byte[] inWrappingKeyBlob, in byte[] inMaskingKey, in android.hardware.keymint.KeyParameter[] inUnwrappingParams, in long inPasswordSid, in long inBiometricSid, out android.hardware.keymint.ByteArray outImportedKeyBlob, out android.hardware.keymint.KeyCharacteristics outImportedKeyCharacteristics);
+  byte[] upgradeKey(in byte[] inKeyBlobToUpgrade, in android.hardware.keymint.KeyParameter[] inUpgradeParams);
+  void deleteKey(in byte[] inKeyBlob);
+  void deleteAllKeys();
+  void destroyAttestationIds();
+  android.hardware.keymint.BeginResult begin(in android.hardware.keymint.KeyPurpose inPurpose, in byte[] inKeyBlob, in android.hardware.keymint.KeyParameter[] inParams, in android.hardware.keymint.HardwareAuthToken inAuthToken);
+  const int AUTH_TOKEN_MAC_LENGTH = 32;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/IKeyMintOperation.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/IKeyMintOperation.aidl
new file mode 100644
index 0000000..5327345
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/IKeyMintOperation.aidl
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+interface IKeyMintOperation {
+  int update(in @nullable android.hardware.keymint.KeyParameterArray inParams, in @nullable byte[] input, in @nullable android.hardware.keymint.HardwareAuthToken inAuthToken, in @nullable android.hardware.keymint.VerificationToken inVerificationToken, out @nullable android.hardware.keymint.KeyParameterArray outParams, out @nullable android.hardware.keymint.ByteArray output);
+  byte[] finish(in @nullable android.hardware.keymint.KeyParameterArray inParams, in @nullable byte[] input, in @nullable byte[] inSignature, in @nullable android.hardware.keymint.HardwareAuthToken authToken, in @nullable android.hardware.keymint.VerificationToken inVerificationToken, out @nullable android.hardware.keymint.KeyParameterArray outParams);
+  void abort();
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyCharacteristics.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyCharacteristics.aidl
new file mode 100644
index 0000000..4e73381
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyCharacteristics.aidl
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable KeyCharacteristics {
+  android.hardware.keymint.KeyParameter[] softwareEnforced;
+  android.hardware.keymint.KeyParameter[] hardwareEnforced;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyDerivationFunction.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyDerivationFunction.aidl
new file mode 100644
index 0000000..8e2c774
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyDerivationFunction.aidl
@@ -0,0 +1,27 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum KeyDerivationFunction {
+  NONE = 0,
+  RFC5869_SHA256 = 1,
+  ISO18033_2_KDF1_SHA1 = 2,
+  ISO18033_2_KDF1_SHA256 = 3,
+  ISO18033_2_KDF2_SHA1 = 4,
+  ISO18033_2_KDF2_SHA256 = 5,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyFormat.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyFormat.aidl
new file mode 100644
index 0000000..cfa585d
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyFormat.aidl
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum KeyFormat {
+  X509 = 0,
+  PKCS8 = 1,
+  RAW = 3,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyMintHardwareInfo.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyMintHardwareInfo.aidl
new file mode 100644
index 0000000..8263e60
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyMintHardwareInfo.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable KeyMintHardwareInfo {
+  int versionNumber;
+  android.hardware.keymint.SecurityLevel securityLevel;
+  @utf8InCpp String keyMintName;
+  @utf8InCpp String keyMintAuthorName;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyOrigin.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyOrigin.aidl
new file mode 100644
index 0000000..8d03d2b
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyOrigin.aidl
@@ -0,0 +1,26 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum KeyOrigin {
+  GENERATED = 0,
+  DERIVED = 1,
+  IMPORTED = 2,
+  RESERVED = 3,
+  SECURELY_IMPORTED = 4,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyParameter.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyParameter.aidl
new file mode 100644
index 0000000..923cc68
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyParameter.aidl
@@ -0,0 +1,26 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable KeyParameter {
+  android.hardware.keymint.Tag tag;
+  boolean boolValue;
+  int integer;
+  long longInteger;
+  byte[] blob;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyParameterArray.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyParameterArray.aidl
new file mode 100644
index 0000000..b9b9782
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyParameterArray.aidl
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable KeyParameterArray {
+  android.hardware.keymint.KeyParameter[] params;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyPurpose.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyPurpose.aidl
new file mode 100644
index 0000000..1aee56a
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/KeyPurpose.aidl
@@ -0,0 +1,26 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum KeyPurpose {
+  ENCRYPT = 0,
+  DECRYPT = 1,
+  SIGN = 2,
+  VERIFY = 3,
+  WRAP_KEY = 5,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/PaddingMode.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/PaddingMode.aidl
new file mode 100644
index 0000000..97f93db
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/PaddingMode.aidl
@@ -0,0 +1,27 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum PaddingMode {
+  NONE = 1,
+  RSA_OAEP = 2,
+  RSA_PSS = 3,
+  RSA_PKCS1_1_5_ENCRYPT = 4,
+  RSA_PKCS1_1_5_SIGN = 5,
+  PKCS7 = 64,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/SecurityLevel.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/SecurityLevel.aidl
new file mode 100644
index 0000000..1fb529d
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/SecurityLevel.aidl
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum SecurityLevel {
+  SOFTWARE = 0,
+  TRUSTED_ENVIRONMENT = 1,
+  STRONGBOX = 2,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Tag.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Tag.aidl
new file mode 100644
index 0000000..33a95fe
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Tag.aidl
@@ -0,0 +1,80 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum Tag {
+  INVALID = 0,
+  PURPOSE = 536870913,
+  ALGORITHM = 268435458,
+  KEY_SIZE = 805306371,
+  BLOCK_MODE = 536870916,
+  DIGEST = 536870917,
+  PADDING = 536870918,
+  CALLER_NONCE = 1879048199,
+  MIN_MAC_LENGTH = 805306376,
+  EC_CURVE = 268435466,
+  RSA_PUBLIC_EXPONENT = 1342177480,
+  INCLUDE_UNIQUE_ID = 1879048394,
+  BLOB_USAGE_REQUIREMENTS = 268435757,
+  BOOTLOADER_ONLY = 1879048494,
+  ROLLBACK_RESISTANCE = 1879048495,
+  HARDWARE_TYPE = 268435760,
+  EARLY_BOOT_ONLY = 1879048497,
+  ACTIVE_DATETIME = 1610613136,
+  ORIGINATION_EXPIRE_DATETIME = 1610613137,
+  USAGE_EXPIRE_DATETIME = 1610613138,
+  MIN_SECONDS_BETWEEN_OPS = 805306771,
+  MAX_USES_PER_BOOT = 805306772,
+  USER_ID = 805306869,
+  USER_SECURE_ID = -1610612234,
+  NO_AUTH_REQUIRED = 1879048695,
+  USER_AUTH_TYPE = 268435960,
+  AUTH_TIMEOUT = 805306873,
+  ALLOW_WHILE_ON_BODY = 1879048698,
+  TRUSTED_USER_PRESENCE_REQUIRED = 1879048699,
+  TRUSTED_CONFIRMATION_REQUIRED = 1879048700,
+  UNLOCKED_DEVICE_REQUIRED = 1879048701,
+  APPLICATION_ID = -1879047591,
+  APPLICATION_DATA = -1879047492,
+  CREATION_DATETIME = 1610613437,
+  ORIGIN = 268436158,
+  ROOT_OF_TRUST = -1879047488,
+  OS_VERSION = 805307073,
+  OS_PATCHLEVEL = 805307074,
+  UNIQUE_ID = -1879047485,
+  ATTESTATION_CHALLENGE = -1879047484,
+  ATTESTATION_APPLICATION_ID = -1879047483,
+  ATTESTATION_ID_BRAND = -1879047482,
+  ATTESTATION_ID_DEVICE = -1879047481,
+  ATTESTATION_ID_PRODUCT = -1879047480,
+  ATTESTATION_ID_SERIAL = -1879047479,
+  ATTESTATION_ID_IMEI = -1879047478,
+  ATTESTATION_ID_MEID = -1879047477,
+  ATTESTATION_ID_MANUFACTURER = -1879047476,
+  ATTESTATION_ID_MODEL = -1879047475,
+  VENDOR_PATCHLEVEL = 805307086,
+  BOOT_PATCHLEVEL = 805307087,
+  DEVICE_UNIQUE_ATTESTATION = 1879048912,
+  IDENTITY_CREDENTIAL_KEY = 1879048913,
+  STORAGE_KEY = 1879048914,
+  ASSOCIATED_DATA = -1879047192,
+  NONCE = -1879047191,
+  MAC_LENGTH = 805307371,
+  RESET_SINCE_ID_ROTATION = 1879049196,
+  CONFIRMATION_TOKEN = -1879047187,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/TagType.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/TagType.aidl
new file mode 100644
index 0000000..8214453
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/TagType.aidl
@@ -0,0 +1,32 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@Backing(type="int") @VintfStability
+enum TagType {
+  INVALID = 0,
+  ENUM = 268435456,
+  ENUM_REP = 536870912,
+  UINT = 805306368,
+  UINT_REP = 1073741824,
+  ULONG = 1342177280,
+  DATE = 1610612736,
+  BOOL = 1879048192,
+  BIGNUM = -2147483648,
+  BYTES = -1879048192,
+  ULONG_REP = -1610612736,
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Timestamp.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Timestamp.aidl
new file mode 100644
index 0000000..f95d8db
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/Timestamp.aidl
@@ -0,0 +1,22 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable Timestamp {
+  long milliSeconds;
+}
diff --git a/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/VerificationToken.aidl b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/VerificationToken.aidl
new file mode 100644
index 0000000..7b4989a
--- /dev/null
+++ b/keymint/aidl/aidl_api/android.hardware.keymint/current/android/hardware/keymint/VerificationToken.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.keymint;
+@VintfStability
+parcelable VerificationToken {
+  long challenge;
+  android.hardware.keymint.Timestamp timestamp;
+  android.hardware.keymint.SecurityLevel securityLevel;
+  byte[] mac;
+}
diff --git a/keymint/aidl/android/hardware/keymint/Algorithm.aidl b/keymint/aidl/android/hardware/keymint/Algorithm.aidl
new file mode 100644
index 0000000..8c5d99c
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/Algorithm.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * Algorithms provided by IKeyMintDevice implementations.
+ */
+@VintfStability
+@Backing(type="int")
+enum Algorithm {
+    /** Asymmetric algorithms. */
+    RSA = 1,
+    /** 2 removed, do not reuse. */
+    EC = 3,
+
+    /** Block cipher algorithms */
+    AES = 32,
+    TRIPLE_DES = 33,
+
+    /** MAC algorithms */
+    HMAC = 128,
+}
diff --git a/keymint/aidl/android/hardware/keymint/BeginResult.aidl b/keymint/aidl/android/hardware/keymint/BeginResult.aidl
new file mode 100644
index 0000000..58eb024
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/BeginResult.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+import android.hardware.keymint.IKeyMintOperation;
+import android.hardware.keymint.KeyParameter;
+
+
+/**
+ * This is all the results returned by the IKeyMintDevice begin() function.
+ */
+@VintfStability
+parcelable BeginResult {
+    /* This is the challenge used in verifyAuthorization.  It must be a nonce. */
+    long challenge;
+
+    /**
+     * begin() uses this field to return additional data from the operation
+     * initialization, notably to return the IV or nonce from operations
+     * that generate an IV or nonce.
+     */
+    KeyParameter[] params;
+    IKeyMintOperation operation;
+}
diff --git a/keymint/aidl/android/hardware/keymint/BlockMode.aidl b/keymint/aidl/android/hardware/keymint/BlockMode.aidl
new file mode 100644
index 0000000..b6b36cc
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/BlockMode.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * Symmetric block cipher modes provided by IKeyMintDevice implementations.
+ */
+@VintfStability
+@Backing(type="int")
+enum BlockMode {
+    /*
+     * Unauthenticated modes, usable only for encryption/decryption and not generally recommended
+     * except for compatibility with existing other protocols.
+     */
+    ECB = 1,
+    CBC = 2,
+    CTR = 3,
+
+    /*
+     * Authenticated modes, usable for encryption/decryption and signing/verification.  Recommended
+     * over unauthenticated modes for all purposes.
+     */
+    GCM = 32,
+}
diff --git a/keymint/aidl/android/hardware/keymint/ByteArray.aidl b/keymint/aidl/android/hardware/keymint/ByteArray.aidl
new file mode 100644
index 0000000..18d187e
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/ByteArray.aidl
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * This is used to contain a byte[], to make out parameters of byte arrays
+ * more convenient for callers.
+ */
+@VintfStability
+parcelable ByteArray {
+    byte[] data;
+}
diff --git a/keymint/aidl/android/hardware/keymint/Certificate.aidl b/keymint/aidl/android/hardware/keymint/Certificate.aidl
new file mode 100644
index 0000000..3a70970
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/Certificate.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+/**
+ * This encodes the IKeyMintDevice attestation generated certificate.
+ */
+
+@VintfStability
+parcelable Certificate {
+    /**
+     * EncodedCertificate contains the bytes of a DER-encoded X.509 certificate.
+     */
+    byte[] encodedCertificate;
+}
diff --git a/keymint/aidl/android/hardware/keymint/Digest.aidl b/keymint/aidl/android/hardware/keymint/Digest.aidl
new file mode 100644
index 0000000..a92ac23
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/Digest.aidl
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * Digests provided by keyMint implementations.
+ */
+@VintfStability
+@Backing(type="int")
+enum Digest {
+    NONE = 0,
+    MD5 = 1,
+    SHA1 = 2,
+    SHA_2_224 = 3,
+    SHA_2_256 = 4,
+    SHA_2_384 = 5,
+    SHA_2_512 = 6,
+}
diff --git a/keymint/aidl/android/hardware/keymint/EcCurve.aidl b/keymint/aidl/android/hardware/keymint/EcCurve.aidl
new file mode 100644
index 0000000..abd44b4
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/EcCurve.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * Supported EC curves, used in ECDSA
+ */
+@VintfStability
+@Backing(type="int")
+enum EcCurve {
+    P_224 = 0,
+    P_256 = 1,
+    P_384 = 2,
+    P_521 = 3,
+}
diff --git a/keymint/aidl/android/hardware/keymint/ErrorCode.aidl b/keymint/aidl/android/hardware/keymint/ErrorCode.aidl
new file mode 100644
index 0000000..2a54954
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/ErrorCode.aidl
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * KeyMint error codes.  Aidl will return these error codes as service specific
+ * errors in EX_SERVICE_SPECIFIC.
+ */
+@VintfStability
+@Backing(type="int")
+enum ErrorCode {
+    OK = 0,
+    ROOT_OF_TRUST_ALREADY_SET = -1,
+    UNSUPPORTED_PURPOSE = -2,
+    INCOMPATIBLE_PURPOSE = -3,
+    UNSUPPORTED_ALGORITHM = -4,
+    INCOMPATIBLE_ALGORITHM = -5,
+    UNSUPPORTED_KEY_SIZE = -6,
+    UNSUPPORTED_BLOCK_MODE = -7,
+    INCOMPATIBLE_BLOCK_MODE = -8,
+    UNSUPPORTED_MAC_LENGTH = -9,
+    UNSUPPORTED_PADDING_MODE = -10,
+    INCOMPATIBLE_PADDING_MODE = -11,
+    UNSUPPORTED_DIGEST = -12,
+    INCOMPATIBLE_DIGEST = -13,
+    INVALID_EXPIRATION_TIME = -14,
+    INVALID_USER_ID = -15,
+    INVALID_AUTHORIZATION_TIMEOUT = -16,
+    UNSUPPORTED_KEY_FORMAT = -17,
+    INCOMPATIBLE_KEY_FORMAT = -18,
+    UNSUPPORTED_KEY_ENCRYPTION_ALGORITHM = -19,   /** For PKCS8 & PKCS12 */
+    UNSUPPORTED_KEY_VERIFICATION_ALGORITHM = -20, /** For PKCS8 & PKCS12 */
+    INVALID_INPUT_LENGTH = -21,
+    KEY_EXPORT_OPTIONS_INVALID = -22,
+    DELEGATION_NOT_ALLOWED = -23,
+    KEY_NOT_YET_VALID = -24,
+    KEY_EXPIRED = -25,
+    KEY_USER_NOT_AUTHENTICATED = -26,
+    OUTPUT_PARAMETER_NULL = -27,
+    INVALID_OPERATION_HANDLE = -28,
+    INSUFFICIENT_BUFFER_SPACE = -29,
+    VERIFICATION_FAILED = -30,
+    TOO_MANY_OPERATIONS = -31,
+    UNEXPECTED_NULL_POINTER = -32,
+    INVALID_KEY_BLOB = -33,
+    IMPORTED_KEY_NOT_ENCRYPTED = -34,
+    IMPORTED_KEY_DECRYPTION_FAILED = -35,
+    IMPORTED_KEY_NOT_SIGNED = -36,
+    IMPORTED_KEY_VERIFICATION_FAILED = -37,
+    INVALID_ARGUMENT = -38,
+    UNSUPPORTED_TAG = -39,
+    INVALID_TAG = -40,
+    MEMORY_ALLOCATION_FAILED = -41,
+    IMPORT_PARAMETER_MISMATCH = -44,
+    SECURE_HW_ACCESS_DENIED = -45,
+    OPERATION_CANCELLED = -46,
+    CONCURRENT_ACCESS_CONFLICT = -47,
+    SECURE_HW_BUSY = -48,
+    SECURE_HW_COMMUNICATION_FAILED = -49,
+    UNSUPPORTED_EC_FIELD = -50,
+    MISSING_NONCE = -51,
+    INVALID_NONCE = -52,
+    MISSING_MAC_LENGTH = -53,
+    KEY_RATE_LIMIT_EXCEEDED = -54,
+    CALLER_NONCE_PROHIBITED = -55,
+    KEY_MAX_OPS_EXCEEDED = -56,
+    INVALID_MAC_LENGTH = -57,
+    MISSING_MIN_MAC_LENGTH = -58,
+    UNSUPPORTED_MIN_MAC_LENGTH = -59,
+    UNSUPPORTED_KDF = -60,
+    UNSUPPORTED_EC_CURVE = -61,
+    KEY_REQUIRES_UPGRADE = -62,
+    ATTESTATION_CHALLENGE_MISSING = -63,
+    KEYMINT_NOT_CONFIGURED = -64,
+    ATTESTATION_APPLICATION_ID_MISSING = -65,
+    CANNOT_ATTEST_IDS = -66,
+    ROLLBACK_RESISTANCE_UNAVAILABLE = -67,
+    HARDWARE_TYPE_UNAVAILABLE = -68,
+    PROOF_OF_PRESENCE_REQUIRED = -69,
+    CONCURRENT_PROOF_OF_PRESENCE_REQUESTED = -70,
+    NO_USER_CONFIRMATION = -71,
+    DEVICE_LOCKED = -72,
+    EARLY_BOOT_ENDED = -73,
+    ATTESTATION_KEYS_NOT_PROVISIONED = -74,
+    ATTESTATION_IDS_NOT_PROVISIONED = -75,
+    INVALID_OPERATION = -76,
+    STORAGE_KEY_UNSUPPORTED = -77,
+
+    UNIMPLEMENTED = -100,
+    VERSION_MISMATCH = -101,
+
+    UNKNOWN_ERROR = -1000,
+
+    // Implementer's namespace for error codes starts at -10000.
+}
diff --git a/keymint/aidl/android/hardware/keymint/HardwareAuthToken.aidl b/keymint/aidl/android/hardware/keymint/HardwareAuthToken.aidl
new file mode 100644
index 0000000..9b56a2e
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/HardwareAuthToken.aidl
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.Timestamp;
+import android.hardware.keymint.HardwareAuthenticatorType;
+
+/**
+ * HardwareAuthToken is used to prove successful user authentication, to unlock the use of a key.
+ *
+ * HardwareAuthTokens are produced by other secure environment applications, notably GateKeeper and
+ * biometric authenticators, in response to successful user authentication events.  These tokens are passed to
+ * begin(), update(), and finish() to prove that authentication occurred.  See those methods for
+ * more details.  It is up to the caller to determine which of the generated auth tokens is
+ * appropriate for a given key operation.
+ */
+@VintfStability
+parcelable HardwareAuthToken {
+
+    /**
+     * challenge is a value that's used to enable authentication tokens to authorize specific
+     * events.  The primary use case for challenge is to authorize an IKeyMintDevice cryptographic
+     * operation, for keys that require authentication per operation. See begin() for details.
+     */
+    long challenge;
+
+    /**
+     *  userId is the a "secure" user ID.  It is not related to any Android user ID or UID, but is
+     *  created in the Gatekeeper application in the secure environment.
+     */
+    long userId;
+
+    /**
+     *  authenticatorId is the a "secure" user ID.  It is not related to any Android user ID or UID,
+     *  but is created in an authentication application in the secure environment, such as the
+     *  Fingerprint application.
+     */
+    long authenticatorId;
+
+    /**
+     * authenticatorType describes the type of authentication that took place, e.g. password or
+     * fingerprint.
+     */
+    HardwareAuthenticatorType authenticatorType;
+
+    /**
+     * timestamp indicates when the user authentication took place, in milliseconds since some
+     * starting point (generally the most recent device boot) which all of the applications within
+     * one secure environment must agree upon.  This timestamp is used to determine whether or not
+     * the authentication occurred recently enough to unlock a key (see Tag::AUTH_TIMEOUT).
+     */
+    Timestamp timestamp;
+
+    /**
+     * MACs are computed with a backward-compatible method, used by Keymaster 3.0, Gatekeeper 1.0
+     * and Fingerprint 1.0, as well as pre-treble HALs.
+     *
+     * The MAC is Constants::AUTH_TOKEN_MAC_LENGTH bytes in length and is computed as follows:
+     *
+     *     HMAC_SHA256(
+     *         H, 0 || challenge || user_id || authenticator_id || authenticator_type || timestamp)
+     *
+     * where ``||'' represents concatenation, the leading zero is a single byte, and all integers
+     * are represented as unsigned values, the full width of the type.  The challenge, userId and
+     * authenticatorId values are in machine order, but authenticatorType and timestamp are in
+     * network order (big-endian).  This odd construction is compatible with the hw_auth_token_t
+     * structure.
+     */
+    byte[] mac;
+}
diff --git a/keymint/aidl/android/hardware/keymint/HardwareAuthenticatorType.aidl b/keymint/aidl/android/hardware/keymint/HardwareAuthenticatorType.aidl
new file mode 100644
index 0000000..5c25e2f
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/HardwareAuthenticatorType.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+/**
+ * Hardware authentication type, used by HardwareAuthTokens to specify the mechanism used to
+ * authentiate the user, and in KeyCharacteristics to specify the allowable mechanisms for
+ * authenticating to activate a key.
+ */
+@VintfStability
+@Backing(type="int")
+enum HardwareAuthenticatorType {
+    NONE = 0,
+    PASSWORD = 1 << 0,
+    FINGERPRINT = 1 << 1,
+    // Additional entries must be powers of 2.
+    ANY = 0xFFFFFFFF,
+}
diff --git a/keymint/aidl/android/hardware/keymint/IKeyMintDevice.aidl b/keymint/aidl/android/hardware/keymint/IKeyMintDevice.aidl
new file mode 100644
index 0000000..8fbab79
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/IKeyMintDevice.aidl
@@ -0,0 +1,790 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.BeginResult;
+import android.hardware.keymint.ByteArray;
+import android.hardware.keymint.Certificate;
+import android.hardware.keymint.HardwareAuthToken;
+import android.hardware.keymint.IKeyMintOperation;
+import android.hardware.keymint.KeyCharacteristics;
+import android.hardware.keymint.KeyFormat;
+import android.hardware.keymint.KeyParameter;
+import android.hardware.keymint.KeyMintHardwareInfo;
+import android.hardware.keymint.KeyPurpose;
+import android.hardware.keymint.SecurityLevel;
+import android.hardware.keymint.VerificationToken;
+
+/**
+ * KeyMint device definition.
+ *
+ * == Features ==
+ *
+ * An IKeyMintDevice provides cryptographic services, including the following categories of
+ * operations:
+ *
+ * o   Key generation
+ * o   Import of asymmetric keys
+ * o   Import of raw symmetric keys
+ * o   Asymmetric decryption with appropriate padding modes
+ * o   Asymmetric signing with digesting and appropriate padding modes
+ * o   Symmetric encryption and decryption in appropriate modes, including an AEAD mode
+ * o   Generation and verification of symmetric message authentication codes
+ * o   Attestation to the presence and configuration of asymmetric keys.
+ *
+ * Protocol elements, such as purpose, mode and padding, as well as access control constraints, must
+ * be specified by the caller when keys are generated or imported and must be permanently bound to
+ * the key, ensuring that the key cannot be used in any other way.
+ *
+ * In addition to the list above, IKeyMintDevice implementations must provide one more service
+ * which is not exposed as an API but used internally: Random number generation.  The random number
+ * generator must be high-quality and must be used for generation of keys, initialization vectors,
+ * random padding and other elements of secure protocols that require randomness.
+ *
+ * == Types of IKeyMintDevices ==
+ *
+ * All of the operations and storage of key material must occur in a secure environment.  Secure
+ * environments may be either:
+ *
+ * 1.  Isolated execution environments, such as a separate virtual machine, hypervisor or
+ *      purpose-built trusted execution environment like ARM TrustZone.  The isolated environment
+ *      must provide complete separation from the Android kernel and user space (collectively called
+ *      the "non-secure world", or NSW) so that nothing running in the NSW can observe or manipulate
+ *      the results of any computation in the isolated environment.  Isolated execution environments
+ *      are identified by the SecurityLevel TRUSTED_ENVIRONMENT.
+ *
+ * 2.  Completely separate, purpose-built and certified secure CPUs, called "StrongBox" devices.
+ *      Examples of StrongBox devices are embedded Secure Elements (eSE) or on-SoC secure processing
+ *      units (iSE).  StrongBox environments are identified by the SecurityLevel STRONGBOX.  To
+ *      qualify as a StrongBox, a device must meet the requirements specified in CDD 9.11.2.
+ *
+ * == Necessary Primitives ==
+ *
+ * All IKeyMintDevice implementations must provide support for the following:
+ *
+ * o   RSA
+ *
+ *      - TRUSTED_ENVIRONMENT IKeyMintDevices must support 2048, 3072 and 4096-bit keys.
+ *        STRONGBOX IKeyMintDevices must support 2048-bit keys.
+ *      - Public exponent F4 (2^16+1)
+ *      - Unpadded, RSASSA-PSS and RSASSA-PKCS1-v1_5 padding modes for RSA signing
+ *      - TRUSTED_ENVIRONMENT IKeyMintDevices must support MD5, SHA1, SHA-2 224, SHA-2 256, SHA-2
+ *        384 and SHA-2 512 digest modes for RSA signing.  STRONGBOX IKeyMintDevices must support
+ *        SHA-2 256.
+ *      - Unpadded, RSAES-OAEP and RSAES-PKCS1-v1_5 padding modes for RSA encryption.
+ *
+ * o   ECDSA
+ *
+ *      - TRUSTED_ENVIRONMENT IKeyMintDevices must support NIST curves P-224, P-256, P-384 and
+ *        P-521.  STRONGBOX IKeyMintDevices must support NIST curve P-256.
+ *      - TRUSTED_ENVIRONMENT IKeyMintDevices must support SHA1, SHA-2 224, SHA-2 256, SHA-2
+ *        384 and SHA-2 512 digest modes.  STRONGBOX IKeyMintDevices must support SHA-2 256.
+ *
+ * o   AES
+ *
+ *      - 128 and 256-bit keys
+ *      - CBC, CTR, ECB and GCM modes.  The GCM mode must not allow the use of tags smaller than 96
+ *        bits or nonce lengths other than 96 bits.
+ *      - CBC and ECB modes must support unpadded and PKCS7 padding modes.  With no padding CBC and
+ *        ECB-mode operations must fail with ErrorCode::INVALID_INPUT_LENGTH if the input isn't a
+ *        multiple of the AES block size.  With PKCS7 padding, GCM and CTR operations must fail with
+ *        ErrorCode::INCOMPATIBLE_PADDING_MODE.
+ *
+ * o   3DES
+ *
+ *      - 168-bit keys.
+ *      - CBC and ECB mode.
+
+ *      - CBC and ECB modes must support unpadded and PKCS7 padding modes.  With no padding CBC and
+ *        ECB-mode operations must fail with ErrorCode::INVALID_INPUT_LENGTH if the input isn't a
+ *        multiple of the DES block size.
+ *
+ * o   HMAC
+ *
+ *      - Any key size that is between 64 and 512 bits (inclusive) and a multiple of 8 must be
+ *        supported.  STRONGBOX IKeyMintDevices must not support keys larger than 512 bits.
+ *      - TRUSTED_ENVIRONMENT IKeyMintDevices must support MD-5, SHA1, SHA-2-224, SHA-2-256,
+ *        SHA-2-384 and SHA-2-512.  STRONGBOX IKeyMintDevices must support SHA-2-256.
+ *
+ * == Key Access Control ==
+ *
+ * Hardware-based keys that can never be extracted from the device don't provide much security if an
+ * attacker can use them at will (though they're more secure than keys which can be
+ * exfiltrated).  Therefore, IKeyMintDevice must enforce access controls.
+ *
+ * Access controls are defined as an "authorization list" of tag/value pairs.  Authorization tags
+ * are 32-bit integers from the Tag enum, and the values are a variety of types, defined in the
+ * TagType enum.  Some tags may be repeated to specify multiple values.  Whether a tag may be
+ * repeated is specified in the documentation for the tag and in the TagType.  When a key is
+ * created or imported, the caller specifies an authorization list.  The IKeyMintDevice must divide
+ * the caller-provided authorizations into two lists, those it enforces in tee secure zone and
+ * those enforced in the strongBox hardware.  These two lists are returned as the "teeEnforced"
+ * and "strongboxEnforced" elements of the KeyCharacteristics struct. Note that software enforced
+ * authorization list entries are not returned because they are not enforced by keymint.  The
+ * IKeyMintDevice must also add the following authorizations to the appropriate list:
+ *
+ * o    Tag::OS_VERSION
+ * o    Tag::OS_PATCHLEVEL
+ * o    Tag::VENDOR_PATCHLEVEL
+ * o    Tag::BOOT_PATCHLEVEL
+ * o    Tag::ORIGIN
+ *
+ * The IKeyMintDevice must ignore unknown tags.
+ *
+ * The caller must always provide the current date time in the keyParameter CREATION_DATETIME
+ * tags.
+ *
+ * All authorization tags and their values, both teeEnforced and strongboxEnforced, including
+ * unknown tags, must be cryptographically bound to the private/secret key material such that any
+ * modification of the portion of the key blob that contains the authorization list makes it
+ * impossible for the secure environment to obtain the private/secret key material.  The
+ * recommended approach to meet this requirement is to use the full set of authorization tags
+ * associated with a key as input to a secure key derivation function used to derive a key that
+ * is used to encrypt the private/secret key material.
+ *
+ * IKeyMintDevice implementations ignore any tags they cannot enforce and do not return them
+ * in KeyCharacteristics.  For example, Tag::ORIGINATION_EXPIRE_DATETIME provides the date and
+ * time after which a key may not be used to encrypt or sign new messages.  Unless the
+ * IKeyMintDevice has access to a secure source of current date/time information, it is not
+ * possible for the IKeyMintDevice to enforce this tag.  An IKeyMintDevice implementation will
+ * not rely on the non-secure world's notion of time, because it could be controlled by an
+ * attacker. Similarly, it cannot rely on GPSr time, even if it has exclusive control of the
+ * GPSr, because that might be spoofed by attacker RF signals.
+ *
+ * IKeyMintDevices do not use or enforce any tags they place in the softwareEnforced
+ * list.  The IKeyMintDevice caller must enforce them, and it is unnecessary to enforce them
+ * twice.
+ *
+ * Some tags must be enforced by the IKeyMintDevice.  See the detailed documentation on each Tag
+ * in Tag.aidl.
+ *
+ * == Root of Trust Binding ==
+ *
+ * IKeyMintDevice keys must be bound to a root of trust, which is a bitstring that must be
+ * provided to the secure environment (by an unspecified, implementation-defined mechanism) during
+ * startup, preferably by the bootloader.  This bitstring must be cryptographically bound to every
+ * key managed by the IKeyMintDevice.  As above, the recommended mechanism for this cryptographic
+ * binding is to include the Root of Trust data in the input to the key derivation function used to
+ * derive a key that is used to encryp the private/secret key material.
+ *
+ * The root of trust consists of a bitstring that must be derived from the public key used by
+ * Verified Boot to verify the signature on the boot image and from the lock state of the
+ * device.  If the public key is changed to allow a different system image to be used or if the
+ * lock state is changed, then all of the IKeyMintDevice-protected keys created by the previous
+ * system state must be unusable, unless the previous state is restored.  The goal is to increase
+ * the value of the software-enforced key access controls by making it impossible for an attacker-
+ * installed operating system to use IKeyMintDevice keys.
+ *
+ * == Version Binding ==
+ *
+ * All keys must also be bound to the operating system and patch level of the system image and the
+ * patch levels of the vendor image and boot image.  This ensures that an attacker who discovers a
+ * weakness in an old version of the software cannot roll a device back to the vulnerable version
+ * and use keys created with the newer version.  In addition, when a key with a given version and
+ * patch level is used on a device that has been upgraded to a newer version or patch level, the
+ * key must be upgraded (See IKeyMintDevice::upgradeKey()) before it can be used, and the previous
+ * version of the key must be invalidated.  In this way, as the device is upgraded, the keys will
+ * "ratchet" forward along with the device, but any reversion of the device to a previous release
+ * will cause the keys to be unusable.
+ *
+ * This version information must be associated with every key as a set of tag/value pairs in the
+ * hardwareEnforced authorization list.  Tag::OS_VERSION, Tag::OS_PATCHLEVEL,
+ * Tag::VENDOR_PATCHLEVEL, and Tag::BOOT_PATCHLEVEL must be cryptographically bound to every
+ * IKeyMintDevice key, as described in the Key Access Control section above.
+ */
+@VintfStability
+interface IKeyMintDevice {
+    const int AUTH_TOKEN_MAC_LENGTH = 32;
+
+    /**
+     * @return info which contains information about the underlying IKeyMintDevice hardware, such
+     *         as version number, security level, keyMint name and author name.
+     */
+    KeyMintHardwareInfo getHardwareInfo();
+
+    /**
+     * Verify authorizations for another IKeyMintDevice instance.
+     *
+     * On systems with both a StrongBox and a TEE IKeyMintDevice instance it is sometimes useful
+     * to ask the TEE KeyMintDevice to verify authorizations for a key hosted in StrongBox.
+     *
+     * For every StrongBox operation, Keystore is required to call this method on the TEE KeyMint,
+     * passing in the StrongBox key's hardwareEnforced authorization list and the challenge
+     * returned by StrongBox begin().  Keystore must then pass the VerificationToken to the
+     * subsequent invocations of StrongBox update() and finish().
+     *
+     * StrongBox implementations must return ErrorCode::UNIMPLEMENTED.
+     *
+     * @param the challenge returned by StrongBox's keyMint's begin().
+     *
+     * @param authToken A HardwareAuthToken if needed to authorize key usage.
+     *
+     * @return error ErrorCode::OK on success or ErrorCode::UNIMPLEMENTED if the KeyMintDevice is
+     *         a StrongBox.  If the IKeyMintDevice cannot verify one or more elements of
+     *         parametersToVerify it must not return an error code, but just omit the unverified
+     *         parameter from the VerificationToken.
+     *
+     * @return token the verification token.  See VerificationToken in VerificationToken.aidl for
+     *         details.
+     */
+    VerificationToken verifyAuthorization(in long challenge,
+                                          in HardwareAuthToken token);
+
+    /**
+     * Adds entropy to the RNG used by KeyMint.  Entropy added through this method must not be the
+     * only source of entropy used, and a secure mixing function must be used to mix the entropy
+     * provided by this method with internally-generated entropy.  The mixing function must be
+     * secure in the sense that if any one of the mixing function inputs is provided with any data
+     * the attacker cannot predict (or control), then the output of the seeded CRNG is
+     * indistinguishable from random.  Thus, if the entropy from any source is good, the output
+     * must be good.
+     *
+     * TODO(seleneh) specify what mixing functions and cprng we allow.
+     *
+     * @param data Bytes to be mixed into the CRNG seed.  The caller must not provide more than 2
+     *        KiB of data per invocation.
+     *
+     * @return error ErrorCode::OK on success; ErrorCode::INVALID_INPUT_LENGTH if the caller
+     *         provides more than 2 KiB of data.
+     */
+    void addRngEntropy(in byte[] data);
+
+    /**
+     * Generates a new cryptographic key, specifying associated parameters, which must be
+     * cryptographically bound to the key.  IKeyMintDevice implementations must disallow any use
+     * of a key in any way inconsistent with the authorizations specified at generation time.  With
+     * respect to parameters that the secure environment cannot enforce, the secure envionment's
+     * obligation is limited to ensuring that the unenforceable parameters associated with the key
+     * cannot be modified.  In addition, the characteristics returned by generateKey places
+     * parameters correctly in the tee-enforced and strongbox-enforced lists.
+     *
+     * In addition to the parameters provided, generateKey must add the following to the returned
+     * characteristics.
+     *
+     * o Tag::ORIGIN with the value KeyOrigin::GENERATED.
+     *
+     * o Tag::BLOB_USAGE_REQUIREMENTS with the appropriate value (see KeyBlobUsageRequirements in
+     *   Tag.aidl).
+     *
+     * o Tag::OS_VERSION, Tag::OS_PATCHLEVEL, Tag::VENDOR_PATCHLEVEL and Tag::BOOT_PATCHLEVEL with
+     *   appropriate values.
+     *
+     * The parameters provided to generateKey depend on the type of key being generated.  This
+     * section summarizes the necessary and optional tags for each type of key.  Tag::ALGORITHM is
+     * always necessary, to specify the type.
+     *
+     * == RSA Keys ==
+     *
+     * The following parameters are required to generate an RSA key:
+     *
+     * o Tag::Key_SIZE specifies the size of the public modulus, in bits.  If omitted, generateKey
+     *   must return ErrorCode::UNSUPPORTED_KEY_SIZE.  Required values for TEE IKeyMintDevice
+     *   implementations are 1024, 2048, 3072 and 4096.  StrongBox IKeyMintDevice implementations
+     *   must support 2048.
+     *
+     * o Tag::RSA_PUBLIC_EXPONENT specifies the RSA public exponent value.  If omitted, generateKey
+     *   must return ErrorCode::INVALID_ARGUMENT.  The values 3 and 65537 must be supported.  It is
+     *   recommended to support all prime values up to 2^64.  If provided with a non-prime value,
+     *   generateKey must return ErrorCode::INVALID_ARGUMENT.
+     *
+     * The following parameters are not necessary to generate a usable RSA key, but generateKey must
+     * not return an error if they are omitted:
+     *
+     * o Tag::PURPOSE specifies allowed purposes.  All KeyPurpose values (see KeyPurpose.aidl)
+     *   except AGREE_KEY must be supported for RSA keys.
+     *
+     * o Tag::DIGEST specifies digest algorithms that may be used with the new key.  TEE
+     *   IKeyMintDevice implementatiosn must support all Digest values (see digest.aidl) for RSA
+     *   keys.  StrongBox IKeyMintDevice implementations must support SHA_2_256.
+     *
+     * o Tag::PADDING specifies the padding modes that may be used with the new
+     *   key.  IKeyMintDevice implementations must support PaddingMode::NONE,
+     *   PaddingMode::RSA_OAEP, PaddingMode::RSA_PSS, PaddingMode::RSA_PKCS1_1_5_ENCRYPT and
+     *   PaddingMode::RSA_PKCS1_1_5_SIGN for RSA keys.
+     *
+     * == ECDSA Keys ==
+     *
+     * Either Tag::KEY_SIZE or Tag::EC_CURVE must be provided to generate an ECDSA key.  If neither
+     * is provided, generateKey must return ErrorCode::UNSUPPORTED_KEY_SIZE.  If Tag::KEY_SIZE is
+     * provided, the possible values are 224, 256, 384 and 521, and must be mapped to Tag::EC_CURVE
+     * values P_224, P_256, P_384 and P_521, respectively.  TEE IKeyMintDevice implementations
+     * must support all curves.  StrongBox implementations must support P_256.
+     *
+     * == AES Keys ==
+     *
+     * Only Tag::KEY_SIZE is required to generate an AES key.  If omitted, generateKey must return
+     * ErrorCode::UNSUPPORTED_KEY_SIZE.  128 and 256-bit key sizes must be supported.
+     *
+     * If Tag::BLOCK_MODE is specified with value BlockMode::GCM, then the caller must also provide
+     * Tag::MIN_MAC_LENGTH.  If omitted, generateKey must return ErrorCode::MISSING_MIN_MAC_LENGTH.
+     *
+     *
+     * @param keyParams Key generation parameters are defined as KeyMintDevice tag/value pairs,
+     *        provided in params.  See above for detailed specifications of which tags are required
+     *        for which types of keys.
+     *
+     * @return generatedKeyBlob Opaque descriptor of the generated key.  The recommended
+     *         implementation strategy is to include an encrypted copy of the key material, wrapped
+     *         in a key unavailable outside secure hardware.
+     *
+     * @return generatedKeyCharacteristics Description of the generated key, divided into two sets:
+     *         hardware-enforced and software-enforced.  The description here applies equally
+     *         to the key characteristics lists returned by generateKey, importKey and
+     *         importWrappedKey.  The characteristics returned by this parameter completely
+     *         describe the type and usage of the specified key.
+     *
+     *         The rule that IKeyMintDevice implementations must use for deciding whether a
+     *         given tag belongs in the hardware-enforced or software-enforced list is that if
+     *         the meaning of the tag is fully assured by secure hardware, it is hardware
+     *         enforced.  Otherwise, it's software enforced.
+     *
+     * @return outCertChain If the key is an asymmetric key, and proper keyparameters for
+     *         attestation (such as challenge) is provided, then this parameter will return the
+     *         attestation certificate.  If the signing of the attestation certificate is from a
+     *         factory key, additional certificates back to the root attestation certificate will
+     *         also be provided. Clients will need to check root certificate against a known-good
+     *         value. The certificates must be DER-encoded.  Caller needs to provide
+     *         CREATION_DATETIME as one of the attestation parameters, otherwise the attestation
+     *         certificate will not contain the creation datetime.  The first certificate in the
+     *         vector is the attestation for the generated key itself, the next certificate is
+     *         the key that signs the first certificate, and so forth.  The last certificate in
+     *         the chain is the root certificate.  If the key is a symmetric key, then no
+     *         certificate will be returned and this variable will return empty. TODO: change
+     *         certificate return to a single certificate and make it nullable b/163604282.
+     */
+    void generateKey(in KeyParameter[] keyParams, out ByteArray generatedKeyBlob,
+                     out KeyCharacteristics generatedKeyCharacteristics,
+                     out Certificate[] outCertChain);
+
+    /**
+     * Imports key material into an IKeyMintDevice.  Key definition parameters and return values
+     * are the same as for generateKey, with the following exceptions:
+     *
+     * o Tag::KEY_SIZE is not necessary in the input parameters.  If not provided, the
+     *   IKeyMintDevice must deduce the value from the provided key material and add the tag and
+     *   value to the key characteristics.  If Tag::KEY_SIZE is provided, the IKeyMintDevice must
+     *   validate it against the key material.  In the event of a mismatch, importKey must return
+     *   ErrorCode::IMPORT_PARAMETER_MISMATCH.
+     *
+     * o Tag::RSA_PUBLIC_EXPONENT (for RSA keys only) is not necessary in the input parameters.  If
+     *   not provided, the IKeyMintDevice must deduce the value from the provided key material and
+     *   add the tag and value to the key characteristics.  If Tag::RSA_PUBLIC_EXPONENT is provided,
+     *   the IKeyMintDevice must validate it against the key material.  In the event of a
+     *   mismatch, importKey must return ErrorCode::IMPORT_PARAMETER_MISMATCH.
+     *
+     * o Tag::ORIGIN (returned in keyCharacteristics) must have the value KeyOrigin::IMPORTED.
+     *
+     * @param inKeyParams Key generation parameters are defined as KeyMintDevice tag/value pairs,
+     *        provided in params.
+     *
+     * @param inKeyFormat The format of the key material to import.  See KeyFormat in
+     *        keyformat.aidl.
+     *
+     * @param inKeyData The key material to import, in the format specified in keyFormat.
+     *
+     * @return outImportedKeyBlob descriptor of the imported key.  The format of the keyblob will
+     *         be the google specified keyblob format.
+     *
+     * @return outImportedKeyCharacteristics Description of the generated key.  See the
+     *         keyCharacteristics description in generateKey.
+     *
+     * @return outCertChain If the key is an asymmetric key, and proper keyparameters for
+     *         attestation (such as challenge) is provided, then this parameter will return the
+     *         attestation certificate.  If the signing of the attestation certificate is from a
+     *         factory key, additional certificates back to the root attestation certificate will
+     *         also be provided. Clients will need to check root certificate against a known-good
+     *         value. The certificates must be DER-encoded.  Caller needs to provide
+     *         CREATION_DATETIME as one of the attestation parameters, otherwise the attestation
+     *         certificate will not contain the creation datetime.  The first certificate in the
+     *         vector is the attestation for the generated key itself, the next certificate is
+     *         the key that signs the first certificate, and so forth.  The last certificate in
+     *         the chain is the root certificate.  If the key is a symmetric key, then no
+     *         certificate will be returned and this variable will return empty.
+     */
+    void importKey(in KeyParameter[] inKeyParams, in KeyFormat inKeyFormat,
+                   in byte[] inKeyData, out ByteArray outImportedKeyBlob,
+                   out KeyCharacteristics outImportedKeyCharacteristics,
+                   out Certificate[] outCertChain);
+
+    /**
+     * Securely imports a key, or key pair, returning a key blob and a description of the imported
+     * key.
+     *
+     * @param inWrappedKeyData The wrapped key material to import.
+     *     TODO(seleneh) Decide if we want the wrapped key in DER-encoded ASN.1 format or CBOR
+     *     format or both.  And specify the standarized format.
+     *
+     *     KeyDescription ::= SEQUENCE(
+     *         keyFormat INTEGER,                   # Values from KeyFormat enum.
+     *         keyParams AuthorizationList,
+     *     )
+     *
+     *     SecureKeyWrapper ::= SEQUENCE(
+     *         version INTEGER,                     # Contains value 0
+     *         encryptedTransportKey OCTET_STRING,
+     *         initializationVector OCTET_STRING,
+     *         keyDescription KeyDescription,
+     *         encryptedKey OCTET_STRING,
+     *         tag OCTET_STRING
+     *     )
+     *
+     *     Where:
+     *
+     *     o keyFormat is an integer from the KeyFormat enum, defining the format of the plaintext
+     *       key material.
+     *     o keyParams is the characteristics of the key to be imported (as with generateKey or
+     *       importKey).  If the secure import is successful, these characteristics must be
+     *       associated with the key exactly as if the key material had been insecurely imported
+     *       with the IKeyMintDevice::importKey.  See attestKey() for documentation of the
+     *       AuthorizationList schema.
+     *     o encryptedTransportKey is a 256-bit AES key, XORed with a masking key and then encrypted
+     *       with the wrapping key specified by wrappingKeyBlob.
+     *     o keyDescription is a KeyDescription, above.
+     *     o encryptedKey is the key material of the key to be imported, in format keyFormat, and
+     *       encrypted with encryptedEphemeralKey in AES-GCM mode, with the DER-encoded
+     *       representation of keyDescription provided as additional authenticated data.
+     *     o tag is the tag produced by the AES-GCM encryption of encryptedKey.
+     *
+     * So, importWrappedKey does the following:
+     *
+     *     1. Get the private key material for wrappingKeyBlob, verifying that the wrapping key has
+     *        purpose KEY_WRAP, padding mode RSA_OAEP, and digest SHA_2_256, returning the
+     *        error INCOMPATIBLE_PURPOSE, INCOMPATIBLE_PADDING_MODE, or INCOMPATIBLE_DIGEST if any
+     *        of those requirements fail.
+     *     2. Extract the encryptedTransportKey field from the SecureKeyWrapper, and decrypt
+     *        it with the wrapping key.
+     *     3. XOR the result of step 2 with maskingKey.
+     *     4. Use the result of step 3 as an AES-GCM key to decrypt encryptedKey, using the encoded
+     *        value of keyDescription as the additional authenticated data.  Call the result
+     *        "keyData" for the next step.
+     *     5. Perform the equivalent of calling importKey(keyParams, keyFormat, keyData), except
+     *        that the origin tag should be set to SECURELY_IMPORTED.
+     *
+     * @param inWrappingKeyBlob The opaque key descriptor returned by generateKey() or importKey().
+     *        This key must have been created with Purpose::WRAP_KEY.
+     *
+     * @param inMaskingKey The 32-byte value XOR'd with the transport key in the SecureWrappedKey
+     *        structure.
+     *
+     * @param inUnwrappingParams must contain any parameters needed to perform the unwrapping
+     *        operation.  For example, if the wrapping key is an AES key the block and padding
+     *        modes must be specified in this argument.
+     *
+     * @param inPasswordSid specifies the password secure ID (SID) of the user that owns the key
+     *        being installed.  If the authorization list in wrappedKeyData contains a
+     *        Tag::USER_SECURE_IDwith a value that has the HardwareAuthenticatorType::PASSWORD
+     *        bit set, the constructed key must be bound to the SID value provided by this
+     *        argument.  If the wrappedKeyData does not contain such a tag and value, this argument
+     *        must be ignored.
+     *
+     * @param inBiometricSid specifies the biometric secure ID (SID) of the user that owns the key
+     *        being installed.  If the authorization list in wrappedKeyData contains a
+     *        Tag::USER_SECURE_ID with a value that has the HardwareAuthenticatorType::FINGERPRINT
+     *        bit set, the constructed key must be bound to the SID value provided by this argument.
+     *        If the wrappedKeyData does not contain such a tag and value, this argument must be
+     *        ignored.
+     *
+     * @return outImportedKeyBlob Opaque descriptor of the imported key.  It is recommended that
+     *         the keyBlob contain a copy of the key material, wrapped in a key unavailable outside
+     *         secure hardware.
+     *
+     * @return outImportedKeyCharacteristics Description of the generated key.  See the description
+     *         of keyCharacteristics parameter in generateKey.
+     */
+    void importWrappedKey(in byte[] inWrappedKeyData,
+                          in byte[] inWrappingKeyBlob,
+                          in byte[] inMaskingKey,
+                          in KeyParameter[] inUnwrappingParams,
+                          in long inPasswordSid,
+                          in long inBiometricSid,
+                          out ByteArray outImportedKeyBlob,
+                          out KeyCharacteristics outImportedKeyCharacteristics);
+
+    /**
+     * Upgrades an old key blob.  Keys can become "old" in two ways: IKeyMintDevice can be
+     * upgraded to a new version with an incompatible key blob format, or the system can be updated
+     * to invalidate the OS version (OS_VERSION tag), system patch level (OS_PATCHLEVEL tag),
+     * vendor patch level (VENDOR_PATCH_LEVEL tag), boot patch level (BOOT_PATCH_LEVEL tag) or
+     * other, implementation-defined patch level (keyMint implementers are encouraged to extend
+     * this HAL with a minor version extension to define validatable patch levels for other
+     * images; tags must be defined in the implementer's namespace, starting at 10000).  In either
+     * case, attempts to use an old key blob with begin() must result in IKeyMintDevice returning
+     * ErrorCode::KEY_REQUIRES_UPGRADE.  The caller must use this method to upgrade the key blob.
+     *
+     * The upgradeKey method must examine each version or patch level associated with the key.  If
+     * any one of them is higher than the corresponding current device value upgradeKey() must
+     * return ErrorCode::INVALID_ARGUMENT.  There is one exception: it is always permissible to
+     * "downgrade" from any OS_VERSION number to OS_VERSION 0.  For example, if the key has
+     * OS_VERSION 080001, it is permisible to upgrade the key if the current system version is
+     * 080100, because the new version is larger, or if the current system version is 0, because
+     * upgrades to 0 are always allowed.  If the system version were 080000, however, keyMint must
+     * return ErrorCode::INVALID_ARGUMENT because that value is smaller than 080001.  Values other
+     * than OS_VERSION must never be downgraded.
+     *
+     * Note that Keymaster versions 2 and 3 required that the system and boot images have the same
+     * patch level and OS version.  This requirement is relaxed for 4.0::IKeymasterDevice and
+     * IKeyMintDevice, and the OS version in the boot image footer is no longer used.
+     *
+     * @param inKeyBlobToUpgrade The opaque descriptor returned by generateKey() or importKey();
+     *
+     * @param inUpgradeParams A parameter list containing any parameters needed to complete the
+     *        upgrade, including Tag::APPLICATION_ID and Tag::APPLICATION_DATA.
+     *
+     * @return A new key blob that references the same key as keyBlobToUpgrade, but is in the new
+     *         format, or has the new version data.
+     */
+    byte[] upgradeKey(in byte[] inKeyBlobToUpgrade, in KeyParameter[] inUpgradeParams);
+
+    /**
+     * Deletes the key, or key pair, associated with the key blob.  Calling this function on
+     * a key with Tag::ROLLBACK_RESISTANCE in its hardware-enforced authorization list must
+     * render the key permanently unusable.  Keys without Tag::ROLLBACK_RESISTANCE may or
+     * may not be rendered unusable.
+     *
+     * @param inKeyBlob The opaque descriptor returned by generateKey() or importKey();
+     */
+    void deleteKey(in byte[] inKeyBlob);
+
+    /**
+     * Deletes all keys in the hardware keystore.  Used when keystore is reset completely.  After
+     * this function is called all keys with Tag::ROLLBACK_RESISTANCE in their hardware-enforced
+     * authorization lists must be rendered permanently unusable.  Keys without
+     * Tag::ROLLBACK_RESISTANCE may or may not be rendered unusable.
+     *
+     * @return error See the ErrorCode enum.
+     */
+    void deleteAllKeys();
+
+    /**
+     * Destroys knowledge of the device's ids.  This prevents all device id attestation in the
+     * future.  The destruction must be permanent so that not even a factory reset will restore the
+     * device ids.
+     *
+     * Device id attestation may be provided only if this method is fully implemented, allowing the
+     * user to permanently disable device id attestation.  If this cannot be guaranteed, the device
+     * must never attest any device ids.
+     *
+     * This is a NOP if device id attestation is not supported.
+     */
+    void destroyAttestationIds();
+
+    /**
+     * Begins a cryptographic operation using the specified key.  If all is well, begin() must
+     * return ErrorCode::OK and create an operation handle which must be passed to subsequent calls
+     * to update(), finish() or abort().
+     *
+     * It is critical that each call to begin() be paired with a subsequent call to finish() or
+     * abort(), to allow the IKeyMintDevice implementation to clean up any internal operation
+     * state.  The caller's failure to do this may leak internal state space or other internal
+     * resources and may eventually cause begin() to return ErrorCode::TOO_MANY_OPERATIONS when it
+     * runs out of space for operations.  Any result other than ErrorCode::OK from begin(), update()
+     * or finish() implicitly aborts the operation, in which case abort() need not be called (and
+     * must return ErrorCode::INVALID_OPERATION_HANDLE if called).  IKeyMintDevice implementations
+     * must support 32 concurrent operations.
+     *
+     * If Tag::APPLICATION_ID or Tag::APPLICATION_DATA were specified during key generation or
+     * import, calls to begin must include those tags with the originally-specified values in the
+     * inParams argument to this method.  If not, begin() must return ErrorCode::INVALID_KEY_BLOB.
+     *
+     * == Authorization Enforcement ==
+     *
+     * The following key authorization parameters must be enforced by the IKeyMintDevice secure
+     * environment if the tags were returned in the "hardwareEnforced" list in the
+     * KeyCharacteristics.  Public key operations, meaning KeyPurpose::ENCRYPT and
+     * KeyPurpose::VERIFY must be allowed to succeed even if authorization requirements are not met.
+     *
+     * -- All Key Types --
+     *
+     * The tags in this section apply to all key types.  See below for additional key type-specific
+     * tags.
+     *
+     * o Tag::PURPOSE: The purpose specified in the begin() call must match one of the purposes in
+     *   the key authorizations.  If the specified purpose does not match, begin() must return
+     *   ErrorCode::UNSUPPORTED_PURPOSE.
+     *
+     * o Tag::ACTIVE_DATETIME can only be enforced if a trusted UTC time source is available.  If
+     *   the current date and time is prior to the tag value, begin() must return
+     *   ErrorCode::KEY_NOT_YET_VALID.
+     *
+     * o Tag::ORIGINATION_EXPIRE_DATETIME can only be enforced if a trusted UTC time source is
+     *   available.  If the current date and time is later than the tag value and the purpose is
+     *   KeyPurpose::ENCRYPT or KeyPurpose::SIGN, begin() must return ErrorCode::KEY_EXPIRED.
+     *
+     * o Tag::USAGE_EXPIRE_DATETIME can only be enforced if a trusted UTC time source is
+     *   available.  If the current date and time is later than the tag value and the purpose is
+     *   KeyPurpose::DECRYPT or KeyPurpose::VERIFY, begin() must return ErrorCode::KEY_EXPIRED.
+     *
+     * o Tag::MAX_USES_PER_BOOT must be compared against a secure counter that tracks the uses of
+     *   the key since boot time.  If the count of previous uses exceeds the tag value, begin() must
+     *   return ErrorCode::KEY_MAX_OPS_EXCEEDED.
+     *
+     * o Tag::USER_SECURE_ID must be enforced by this method if and only if the key also has
+     *   Tag::AUTH_TIMEOUT (if it does not have Tag::AUTH_TIMEOUT, the Tag::USER_SECURE_ID
+     *   requirement must be enforced by update() and finish()).  If the key has both, then this
+     *   method must receive a non-empty HardwareAuthToken in the authToken argument.  For the auth
+     *   token to be valid, all of the following have to be true:
+     *
+     *   o The HMAC field must validate correctly.
+     *
+     *   o At least one of the Tag::USER_SECURE_ID values from the key must match at least one of
+     *     the secure ID values in the token.
+     *
+     *   o The key must have a Tag::USER_AUTH_TYPE that matches the auth type in the token.
+     *
+     *   o The timestamp in the auth token plus the value of the Tag::AUTH_TIMEOUT must be less than
+     *     the current secure timestamp (which is a monotonic timer counting milliseconds since
+     *     boot.)
+     *
+     *   If any of these conditions are not met, begin() must return
+     *   ErrorCode::KEY_USER_NOT_AUTHENTICATED.
+     *
+     * o Tag::CALLER_NONCE allows the caller to specify a nonce or initialization vector (IV).  If
+     *   the key doesn't have this tag, but the caller provided Tag::NONCE to this method,
+     *   ErrorCode::CALLER_NONCE_PROHIBITED must be returned.
+     *
+     * o Tag::BOOTLOADER_ONLY specifies that only the bootloader may use the key.  If this method is
+     *   called with a bootloader-only key after the bootloader has finished executing, it must
+     *   return ErrorCode::INVALID_KEY_BLOB.  The mechanism for notifying the IKeyMintDevice that
+     *   the bootloader has finished executing is implementation-defined.
+     *
+     * -- RSA Keys --
+     *
+     * All RSA key operations must specify exactly one padding mode in inParams.  If unspecified or
+     * specified more than once, the begin() must return ErrorCode::UNSUPPORTED_PADDING_MODE.
+     *
+     * RSA signing and verification operations need a digest, as do RSA encryption and decryption
+     * operations with OAEP padding mode.  For those cases, the caller must specify exactly one
+     * digest in inParams.  If unspecified or specified more than once, begin() must return
+     * ErrorCode::UNSUPPORTED_DIGEST.
+     *
+     * Private key operations (KeyPurpose::DECRYPT and KeyPurpose::SIGN) need authorization of
+     * digest and padding, which means that the key authorizations need to contain the specified
+     * values.  If not, begin() must return ErrorCode::INCOMPATIBLE_DIGEST or
+     * ErrorCode::INCOMPATIBLE_PADDING, as appropriate.  Public key operations (KeyPurpose::ENCRYPT
+     * and KeyPurpose::VERIFY) are permitted with unauthorized digest or padding modes.
+     *
+     * With the exception of PaddingMode::NONE, all RSA padding modes are applicable only to certain
+     * purposes.  Specifically, PaddingMode::RSA_PKCS1_1_5_SIGN and PaddingMode::RSA_PSS only
+     * support signing and verification, while PaddingMode::RSA_PKCS1_1_5_ENCRYPT and
+     * PaddingMode::RSA_OAEP only support encryption and decryption.  begin() must return
+     * ErrorCode::UNSUPPORTED_PADDING_MODE if the specified mode does not support the specified
+     * purpose.
+     *
+     * There are some important interactions between padding modes and digests:
+     *
+     * o PaddingMode::NONE indicates that a "raw" RSA operation is performed.  If signing or
+     *   verifying, Digest::NONE is specified for the digest.  No digest is necessary for unpadded
+     *   encryption or decryption.
+     *
+     * o PaddingMode::RSA_PKCS1_1_5_SIGN padding requires a digest.  The digest may be Digest::NONE,
+     *   in which case the KeyMint implementation cannot build a proper PKCS#1 v1.5 signature
+     *   structure, because it cannot add the DigestInfo structure.  Instead, the IKeyMintDevice
+     *   must construct 0x00 || 0x01 || PS || 0x00 || M, where M is the provided message and PS is a
+     *   random padding string at least eight bytes in length.  The size of the RSA key has to be at
+     *   least 11 bytes larger than the message, otherwise begin() must return
+     *   ErrorCode::INVALID_INPUT_LENGTH.
+     *
+     * o PaddingMode::RSA_PKCS1_1_1_5_ENCRYPT padding does not require a digest.
+     *
+     * o PaddingMode::RSA_PSS padding requires a digest, which may not be Digest::NONE.  If
+     *   Digest::NONE is specified, the begin() must return ErrorCode::INCOMPATIBLE_DIGEST.  In
+     *   addition, the size of the RSA key must be at least 2 + D bytes larger than the output size
+     *   of the digest, where D is the size of the digest, in bytes.  Otherwise begin() must
+     *   return ErrorCode::INCOMPATIBLE_DIGEST.  The salt size must be D.
+     *
+     * o PaddingMode::RSA_OAEP padding requires a digest, which may not be Digest::NONE.  If
+     *   Digest::NONE is specified, begin() must return ErrorCode::INCOMPATIBLE_DIGEST.  The OAEP
+     *   mask generation function must be MGF1 and the MGF1 digest must be SHA1, regardless of the
+     *   OAEP digest specified.
+     *
+     * -- EC Keys --
+     *
+     * EC key operations must specify exactly one padding mode in inParams.  If unspecified or
+     * specified more than once, begin() must return ErrorCode::UNSUPPORTED_PADDING_MODE.
+     *
+     * Private key operations (KeyPurpose::SIGN) need authorization of digest and padding, which
+     * means that the key authorizations must contain the specified values.  If not, begin() must
+     * return ErrorCode::INCOMPATIBLE_DIGEST.  Public key operations (KeyPurpose::VERIFY) are
+     * permitted with unauthorized digest or padding.
+     *
+     * -- AES Keys --
+     *
+     * AES key operations must specify exactly one block mode (Tag::BLOCK_MODE) and one padding mode
+     * (Tag::PADDING) in inParams.  If either value is unspecified or specified more than once,
+     * begin() must return ErrorCode::UNSUPPORTED_BLOCK_MODE or
+     * ErrorCode::UNSUPPORTED_PADDING_MODE.  The specified modes must be authorized by the key,
+     * otherwise begin() must return ErrorCode::INCOMPATIBLE_BLOCK_MODE or
+     * ErrorCode::INCOMPATIBLE_PADDING_MODE.
+     *
+     * If the block mode is BlockMode::GCM, inParams must specify Tag::MAC_LENGTH, and the specified
+     * value must be a multiple of 8 that is not greater than 128 or less than the value of
+     * Tag::MIN_MAC_LENGTH in the key authorizations.  For MAC lengths greater than 128 or
+     * non-multiples of 8, begin() must return ErrorCode::UNSUPPORTED_MAC_LENGTH.  For values less
+     * than the key's minimum length, begin() must return ErrorCode::INVALID_MAC_LENGTH.
+     *
+     * If the block mode is BlockMode::GCM or BlockMode::CTR, the specified padding mode must be
+     * PaddingMode::NONE.  For BlockMode::ECB or BlockMode::CBC, the mode may be PaddingMode::NONE
+     * or PaddingMode::PKCS7.  If the padding mode doesn't meet these conditions, begin() must
+     * return ErrorCode::INCOMPATIBLE_PADDING_MODE.
+     *
+     * If the block mode is BlockMode::CBC, BlockMode::CTR, or BlockMode::GCM, an initialization
+     * vector or nonce is required.  In most cases, callers shouldn't provide an IV or nonce and the
+     * IKeyMintDevice implementation must generate a random IV or nonce and return it via
+     * Tag::NONCE in outParams.  CBC and CTR IVs are 16 bytes.  GCM nonces are 12 bytes.  If the key
+     * authorizations contain Tag::CALLER_NONCE, then the caller may provide an IV/nonce with
+     * Tag::NONCE in inParams.  If a nonce is provided when Tag::CALLER_NONCE is not authorized,
+     * begin() must return ErrorCode::CALLER_NONCE_PROHIBITED.  If a nonce is not provided when
+     * Tag::CALLER_NONCE is authorized, IKeyMintDevice msut generate a random IV/nonce.
+     *
+     * -- HMAC keys --
+     *
+     * HMAC key operations must specify Tag::MAC_LENGTH in inParams.  The specified value must be a
+     * multiple of 8 that is not greater than the digest length or less than the value of
+     * Tag::MIN_MAC_LENGTH in the key authorizations.  For MAC lengths greater than the digest
+     * length or non-multiples of 8, begin() must return ErrorCode::UNSUPPORTED_MAC_LENGTH.  For
+     * values less than the key's minimum length, begin() must return ErrorCode::INVALID_MAC_LENGTH.
+     *
+     * @param inPurpose The purpose of the operation, one of KeyPurpose::ENCRYPT,
+     *        KeyPurpose::DECRYPT, KeyPurpose::SIGN or KeyPurpose::VERIFY.  Note that for AEAD
+     *        modes, encryption and decryption imply signing and verification, respectively, but
+     *        must be specified as KeyPurpose::ENCRYPT and KeyPurpose::DECRYPT.
+     *
+     * @param inKeyBlob The opaque key descriptor returned by generateKey() or importKey().  The key
+     *        must have a purpose compatible with purpose and all of its usage requirements must be
+     *        satisfied, or begin() must return an appropriate error code (see above).
+     *
+     * @param inParams Additional parameters for the operation.  If Tag::APPLICATION_ID or
+     *        Tag::APPLICATION_DATA were provided during generation, they must be provided here, or
+     *        the operation must fail with ErrorCode::INVALID_KEY_BLOB.  For operations that require
+     *        a nonce or IV, on keys that were generated with Tag::CALLER_NONCE, inParams may
+     *        contain a tag Tag::NONCE.  If Tag::NONCE is provided for a key without
+     *        Tag:CALLER_NONCE, ErrorCode::CALLER_NONCE_PROHIBITED must be returned.
+     *
+     * @param inAuthToken Authentication token.  Callers that provide no token must set all numeric
+     *        fields to zero and the MAC must be an empty vector.  TODO: make this field nullable.
+     *        b/173483024.
+     *
+     * @return BeginResult as output, which contains the challenge, KeyParameters which haves
+     *         additional data from the operation initialization, notably to return the IV or nonce
+     *         from operations that generate an IV or nonce, and IKeyMintOperation object pointer
+     *         which is used to perform update(), finish() or abort() operations.
+     */
+    BeginResult begin(in KeyPurpose inPurpose,
+               in byte[] inKeyBlob,
+               in KeyParameter[] inParams,
+               in HardwareAuthToken inAuthToken);
+}
diff --git a/keymint/aidl/android/hardware/keymint/IKeyMintOperation.aidl b/keymint/aidl/android/hardware/keymint/IKeyMintOperation.aidl
new file mode 100644
index 0000000..1b79296
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/IKeyMintOperation.aidl
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.ByteArray;
+import android.hardware.keymint.HardwareAuthToken;
+import android.hardware.keymint.KeyParameter;
+import android.hardware.keymint.KeyParameterArray;
+import android.hardware.keymint.VerificationToken;
+
+@VintfStability
+interface IKeyMintOperation {
+    /**
+     * Provides data to, and possibly receives output from, an ongoing cryptographic operation begun
+     * with begin().
+     *
+     * If operation is in an invalid state (was aborted or had an error) update() must return
+     * ErrorCode::INVALID_OPERATION_HANDLE.
+     *
+     * To provide more flexibility for buffer handling, implementations of this method have the
+     * option of consuming less data than was provided.  The caller is responsible for looping to
+     * feed the rest of the data in subsequent calls.  The amount of input consumed must be returned
+     * in the inputConsumed parameter.  Implementations must always consume at least one byte,
+     * unless the operation cannot accept any more; if more than zero bytes are provided and zero
+     * bytes are consumed, callers must consider this an error and abort the operation.
+     * TODO(seleneh) update the code to always consume alll the input data. b/168665179.
+     *
+     * Implementations may also choose how much data to return, as a result of the update.  This is
+     * only relevant for encryption and decryption operations, because signing and verification
+     * return no data until finish.  It is recommended to return data as early as possible, rather
+     * than buffer it.
+     *
+     * If this method returns an error code other than ErrorCode::OK, the operation is aborted and
+     * the operation handle must be invalidated.  Any future use of the handle, with this method,
+     * finish, or abort, must return ErrorCode::INVALID_OPERATION_HANDLE.
+     *
+     * == Authorization Enforcement ==
+     *
+     * Key authorization enforcement is performed primarily in begin().  The one exception is the
+     * case where the key has:
+     *
+     * o One or more Tag::USER_SECURE_IDs, and
+     *
+     * o Does not have a Tag::AUTH_TIMEOUT
+     *
+     * In this case, the key requires an authorization per operation, and the update method must
+     * receive a non-empty and valid HardwareAuthToken.  For the auth token to be valid, all of the
+     * following has to be true:
+     *
+     *   o The HMAC field must validate correctly.
+     *
+     *   o At least one of the Tag::USER_SECURE_ID values from the key must match at least one of
+     *     the secure ID values in the token.
+     *
+     *   o The key must have a Tag::USER_AUTH_TYPE that matches the auth type in the token.
+     *
+     *   o The challenge field in the auth token must contain the operationHandle
+     *
+     *   If any of these conditions are not met, update() must return
+     *   ErrorCode::KEY_USER_NOT_AUTHENTICATED.
+     *
+     * The caller must provide the auth token on every call to update() and finish().
+     *
+     * -- RSA keys --
+     *
+     * For signing and verification operations with Digest::NONE, this method must accept the entire
+     * block to be signed or verified in a single update.  It may not consume only a portion of the
+     * block in these cases.  However, the caller may choose to provide the data in multiple
+     * updates, and update() must accept the data this way as well.  If the caller provides more
+     * data to sign than can be used (length of data exceeds RSA key size), update() must return
+     * ErrorCode::INVALID_INPUT_LENGTH.
+     *
+     * -- ECDSA keys --
+     *
+     * For signing and verification operations with Digest::NONE, this method must accept the entire
+     * block to be signed or verified in a single update.  This method may not consume only a
+     * portion of the block.  However, the caller may choose to provide the data in multiple updates
+     * and update() must accept the data this way as well.  If the caller provides more data to sign
+     * than can be used, the data is silently truncated.  (This differs from the handling of excess
+     * data provided in similar RSA operations.  The reason for this is compatibility with legacy
+     * clients.)
+     *
+     * -- AES keys --
+     *
+     * AES GCM mode supports "associated authentication data," provided via the Tag::ASSOCIATED_DATA
+     * tag in the inParams argument.  The associated data may be provided in repeated calls
+     * (important if the data is too large to send in a single block) but must always precede data
+     * to be encrypted or decrypted.  An update call may receive both associated data and data to
+     * encrypt/decrypt, but subsequent updates must not include associated data.  If the caller
+     * provides associated data to an update call after a call that includes data to
+     * encrypt/decrypt, update() must return ErrorCode::INVALID_TAG.
+     *
+     * For GCM encryption, the AEAD tag must be appended to the ciphertext by finish().  During
+     * decryption, the last Tag::MAC_LENGTH bytes of the data provided to the last update call must
+     * be the AEAD tag.  Since a given invocation of update cannot know if it's the last invocation,
+     * it must process all but the tag length and buffer the possible tag data for processing during
+     * finish().
+     *
+     * TODO: update() needs to be refactored b/168665179.
+     *
+     * @param inParams Additional parameters for the operation.  For AEAD modes, this is used to
+     *        specify Tag::ADDITIONAL_DATA.  Note that additional data may be provided in multiple
+     *        calls to update(), but only until input data has been provided.
+     *
+     * @param input Data to be processed.  Note that update() may or may not consume all of the data
+     *        provided.  See return value.
+     *
+     * @param verificationToken Verification token, used to prove that another IKeymasterDevice HAL
+     *        has verified some parameters, and to deliver the other HAL's current timestamp, if
+     *        needed.  If not provided, all fields must be initialized to zero and vectors must be
+     *        empty.
+     *
+     * @return error Returns ErrorCode encountered in keymint as service specific errors. See the
+     *         ErrorCode enum in ErrorCode.aidl.
+     *
+     * @return int Amount of data that was consumed by update().  If this is less than the
+     *         amount provided, the caller may provide the remainder in a subsequent call to
+     *         update() or finish().  Every call to update must consume at least one byte, unless
+     *         the input is empty, and implementations should consume as much data as reasonably
+     *         possible for each call.
+     *
+     * @return outParams returns the updated key parameters from the blob, if needed.
+     * operation.
+     *
+     * @return out variable output The output data, if any.
+     */
+    int update(in @nullable KeyParameterArray inParams,
+               in @nullable byte[] input,
+               in @nullable HardwareAuthToken inAuthToken,
+               in @nullable VerificationToken inVerificationToken,
+               out @nullable KeyParameterArray outParams,
+               out @nullable ByteArray output);
+
+    /**
+     * Finalizes a cryptographic operation begun with begin() and invalidates operation.
+     *
+     * This method is the last one called in an operation, so all processed data must be returned.
+     *
+     * Whether it completes successfully or returns an error, this method finalizes the operation.
+     * Any future use of the operation, with finish(), update(), or abort(), must return
+     * ErrorCode::INVALID_OPERATION_HANDLE.
+     *
+     * Signing operations return the signature as the output.  Verification operations accept the
+     * signature in the signature parameter, and return no output.
+     *
+     * == Authorization enforcement ==
+     *
+     * Key authorization enforcement is performed primarily in begin().  The exceptions are
+     * authorization per operation keys and confirmation-required keys.
+     *
+     * Authorization per operation keys are the case where the key has one or more
+     * Tag::USER_SECURE_IDs, and does not have a Tag::AUTH_TIMEOUT.  In this case, the key requires
+     * an authorization per operation, and the finish method must receive a non-empty and valid
+     * authToken.  For the auth token to be valid, all of the following has to be true:
+     *
+     *   o The HMAC field must validate correctly.
+     *
+     *   o At least one of the Tag::USER_SECURE_ID values from the key must match at least one of
+     *     the secure ID values in the token.
+     *
+     *   o The key must have a Tag::USER_AUTH_TYPE that matches the auth type in the token.
+     *
+     *   o The challenge field in the auth token must contain the operation challenge.
+     *
+     *   If any of these conditions are not met, update() must return
+     *   ErrorCode::KEY_USER_NOT_AUTHENTICATED.
+     *
+     * The caller must provide the auth token on every call to update() and finish().
+     *
+     * Confirmation-required keys are keys that were generated with
+     * Tag::TRUSTED_CONFIRMATION_REQUIRED.  For these keys, when doing a signing operation the
+     * caller must pass a KeyParameter Tag::CONFIRMATION_TOKEN to finish().  Implementations must
+     * check the confirmation token by computing the 32-byte HMAC-SHA256 over all of the
+     * to-be-signed data, prefixed with the 18-byte UTF-8 encoded string "confirmation token". If
+     * the computed value does not match the Tag::CONFIRMATION_TOKEN parameter, finish() must not
+     * produce a signature and must return ErrorCode::NO_USER_CONFIRMATION.
+     *
+     * -- RSA keys --
+     *
+     * Some additional requirements, depending on the padding mode:
+     *
+     * o PaddingMode::NONE.  For unpadded signing and encryption operations, if the provided data is
+     *   shorter than the key, the data must be zero-padded on the left before
+     *   signing/encryption.  If the data is the same length as the key, but numerically larger,
+     *   finish() must return ErrorCode::INVALID_ARGUMENT.  For verification and decryption
+     *   operations, the data must be exactly as long as the key.  Otherwise, return
+     *   ErrorCode::INVALID_INPUT_LENGTH.
+     *
+     * o PaddingMode::RSA_PSS.  For PSS-padded signature operations, the PSS salt length must match
+     *   the size of the PSS digest selected.  The digest specified with Tag::DIGEST in inputParams
+     *   on begin() must be used as the PSS digest algorithm, MGF1 must be used as the mask
+     *   generation function and SHA1 must be used as the MGF1 digest algorithm.
+     *
+     * o PaddingMode::RSA_OAEP.  The digest specified with Tag::DIGEST in inputParams on begin is
+     *   used as the OAEP digest algorithm, MGF1 must be used as the mask generation function and
+     *   and SHA1 must be used as the MGF1 digest algorithm.
+     *
+     * -- ECDSA keys --
+     *
+     * If the data provided for unpadded signing or verification is too long, truncate it.
+     *
+     * -- AES keys --
+     *
+     * Some additional conditions, depending on block mode:
+     *
+     * o BlockMode::ECB or BlockMode::CBC.  If padding is PaddingMode::NONE and the data length is
+     *  not a multiple of the AES block size, finish() must return
+     *  ErrorCode::INVALID_INPUT_LENGTH.  If padding is PaddingMode::PKCS7, pad the data per the
+     *  PKCS#7 specification, including adding an additional padding block if the data is a multiple
+     *  of the block length.
+     *
+     * o BlockMode::GCM.  During encryption, after processing all plaintext, compute the tag
+     *   (Tag::MAC_LENGTH bytes) and append it to the returned ciphertext.  During decryption,
+     *   process the last Tag::MAC_LENGTH bytes as the tag.  If tag verification fails, finish()
+     *   must return ErrorCode::VERIFICATION_FAILED.
+     *
+     * TODO: update() will need to be refactored into 2 function. b/168665179.
+     *
+     * @param inParams Additional parameters for the operation.  For AEAD modes, this is used to
+     *        specify Tag::ADDITIONAL_DATA, but only if no input data was provided to update().
+     *
+     * @param input Data to be processed, per the parameters established in the call to begin().
+     *        finish() must consume all provided data or return ErrorCode::INVALID_INPUT_LENGTH.
+     *
+     * @param signature The signature to be verified if the purpose specified in the begin() call
+     *        was KeyPurpose::VERIFY.
+     *
+     * @param authToken Authentication token. Can be nullable if not provided.
+     *
+     * @param verificationToken Verification token, used to prove that another IKeyMintDevice HAL
+     *        has verified some parameters, and to deliver the other HAL's current timestamp, if
+     *        needed. Can be nullable if not needed.
+     *
+     * @return outParams Any output parameters generated by finish().
+     *
+     * @return The output data, if any.
+     */
+    byte[] finish(in @nullable KeyParameterArray inParams, in @nullable byte[] input,
+                in @nullable byte[] inSignature,
+                in @nullable HardwareAuthToken authToken,
+                in @nullable VerificationToken inVerificationToken,
+                out @nullable KeyParameterArray outParams);
+
+    /**
+     * Aborts a cryptographic operation begun with begin(), freeing all internal resources. If an
+     * operation was finalized, calling update, finish, or abort yields
+     * ErrorCode::INVALID_OPERATION_HANDLE. An operation is finalized if finish or abort was
+     * called on it, or if update returned an ErrorCode.
+     *
+     * @param operationHandle The operation handle returned by begin().  This handle must be
+     *        invalid when abort() returns.
+     *
+     * @return error See the ErrorCode enum in ErrorCode.aidl.
+     */
+    void abort();
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyCharacteristics.aidl b/keymint/aidl/android/hardware/keymint/KeyCharacteristics.aidl
new file mode 100644
index 0000000..ac7c2b4
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyCharacteristics.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.KeyParameter;
+
+/**
+ * KeyCharacteristics defines the attributes of a key, including cryptographic parameters, and usage
+ * restrictions.  It consits of two vectors of KeyParameters, one for "softwareEnforced" attributes
+ * and one for "hardwareEnforced" attributes.
+ *
+ * KeyCharacteristics objects are returned by generateKey, importKey, importWrappedKey and
+ * getKeyCharacteristics.  The IKeyMintDevice secure environment is responsible for allocating the
+ * parameters, all of which are Tags with associated values, to the correct vector.  The
+ * hardwareEnforced vector must contain only those attributes which are enforced by secure hardware.
+ * All others should be in the softwareEnforced vector.  See the definitions of individual Tag enums
+ * for specification of which must be hardware-enforced, which may be software-enforced and which
+ * must never appear in KeyCharacteristics.
+ */
+@VintfStability
+parcelable KeyCharacteristics {
+    /* TODO(seleneh) get rid of the software enforced in keymint.  replace hardware enforced with
+     * tee enforced and strongbox enforced.
+     */
+    KeyParameter[] softwareEnforced;
+    KeyParameter[] hardwareEnforced;
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyDerivationFunction.aidl b/keymint/aidl/android/hardware/keymint/KeyDerivationFunction.aidl
new file mode 100644
index 0000000..1eba446
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyDerivationFunction.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+/**
+ * Key derivation functions, mostly used in ECIES.
+ */
+@VintfStability
+@Backing(type="int")
+enum KeyDerivationFunction {
+    /** Do not apply a key derivation function; use the raw agreed key */
+    NONE = 0,
+    /** HKDF defined in RFC 5869 with SHA256 */
+    RFC5869_SHA256 = 1,
+    /** KDF1 defined in ISO 18033-2 with SHA1 */
+    ISO18033_2_KDF1_SHA1 = 2,
+    /** KDF1 defined in ISO 18033-2 with SHA256 */
+    ISO18033_2_KDF1_SHA256 = 3,
+    /** KDF2 defined in ISO 18033-2 with SHA1 */
+    ISO18033_2_KDF2_SHA1 = 4,
+    /** KDF2 defined in ISO 18033-2 with SHA256 */
+    ISO18033_2_KDF2_SHA256 = 5,
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyFormat.aidl b/keymint/aidl/android/hardware/keymint/KeyFormat.aidl
new file mode 100644
index 0000000..13044dc
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyFormat.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * Formats for key import and export.
+ */
+@VintfStability
+@Backing(type="int")
+enum KeyFormat {
+    /** X.509 certificate format, for public key export. */
+    X509 = 0,
+    /** PCKS#8 format, asymmetric key pair import. */
+    PKCS8 = 1,
+    /** Raw bytes, for symmetric key import. */
+    RAW = 3,
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyMintHardwareInfo.aidl b/keymint/aidl/android/hardware/keymint/KeyMintHardwareInfo.aidl
new file mode 100644
index 0000000..5815b10
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyMintHardwareInfo.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.SecurityLevel;
+
+
+/**
+ * KeyMintHardwareInfo is the hardware information returned by calling KeyMint getHardwareInfo()
+ */
+
+@VintfStability
+parcelable KeyMintHardwareInfo {
+    /**
+     * Implementation version of the keymint hardware.  The version number is implementation
+     * defined, and not necessarily globally meaningful.  The version is used to distinguish
+     * between different versions of a given implementation.
+     * TODO(seleneh) add the version related info to the code.
+     */
+    int versionNumber;
+
+    /* securityLevel is the security level of the IKeyMintDevice implementation accessed
+     * through this aidl package.  */
+    SecurityLevel securityLevel;
+
+    /* keyMintName is the name of the IKeyMintDevice implementation.  */
+    @utf8InCpp String keyMintName;
+
+    /* keyMintAuthorName is the name of the author of the IKeyMintDevice implementation
+     *         (organization name, not individual). This name is implementation defined,
+     *         so it can be used to distinguish between different implementations from the
+     *         same author.
+     */
+    @utf8InCpp String keyMintAuthorName;
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyOrigin.aidl b/keymint/aidl/android/hardware/keymint/KeyOrigin.aidl
new file mode 100644
index 0000000..70320d3
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyOrigin.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * The origin of a key (or pair), i.e. where it was generated.  Note that ORIGIN can be found in
+ * either the hardware-enforced or software-enforced list for a key, indicating whether the key is
+ * hardware or software-based.  Specifically, a key with GENERATED in the hardware-enforced list
+ * must be guaranteed never to have existed outide the secure hardware.
+ */
+@VintfStability
+@Backing(type="int")
+enum KeyOrigin {
+    /** Generated in keyMint.  Should not exist outside the TEE. */
+    GENERATED = 0,
+
+    /** Derived inside keyMint.  Likely exists off-device. */
+    DERIVED = 1,
+
+    /** Imported into keyMint.  Existed as cleartext in Android. */
+    IMPORTED = 2,
+
+    /** Previously used for another purpose that is now obsolete. */
+    RESERVED = 3,
+
+    /**
+     * Securely imported into KeyMint.  Was created elsewhere, and passed securely through Android
+     * to secure hardware.
+     */
+    SECURELY_IMPORTED = 4,
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyParameter.aidl b/keymint/aidl/android/hardware/keymint/KeyParameter.aidl
new file mode 100644
index 0000000..d58e4aa
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyParameter.aidl
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+import android.hardware.keymint.Algorithm;
+import android.hardware.keymint.BlockMode;
+import android.hardware.keymint.Digest;
+import android.hardware.keymint.EcCurve;
+import android.hardware.keymint.HardwareAuthenticatorType;
+import android.hardware.keymint.KeyDerivationFunction;
+import android.hardware.keymint.KeyOrigin;
+import android.hardware.keymint.KeyPurpose;
+import android.hardware.keymint.PaddingMode;
+import android.hardware.keymint.SecurityLevel;
+import android.hardware.keymint.Tag;
+
+
+/**
+ * Identifies the key authorization parameters to be used with keyMint.  This is usually
+ * provided as an array of KeyParameters to IKeyMintDevice or Operation.
+ *
+ * TODO(seleneh): Union was not supported in aidl when this cl is first drafted.  So we just had
+ * the Tags, and bool, int, long, int[], and we will cast to the appropate types base on the
+ * Tag value.  We need to update this defination to distingish Algorithm, BlockMode,
+ * PaddingMode, KeyOrigin...etc later, as union support is recently added to aidl.
+ * b/173253030
+ */
+@VintfStability
+parcelable KeyParameter {
+    /**
+     * Identify what type of key parameter this parcelable actually holds, and based on the type
+     * of tag is int, long, bool, or byte[], one of the fields below will be referenced.
+     */
+    Tag tag;
+
+    boolean boolValue;
+    int integer;
+    long longInteger;
+    // TODO: change this to nullable.
+    byte[] blob;
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyParameterArray.aidl b/keymint/aidl/android/hardware/keymint/KeyParameterArray.aidl
new file mode 100644
index 0000000..cc9e37a
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyParameterArray.aidl
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.KeyParameter;
+
+/**
+ * Identifies the key authorization parameters to be used with keyMint.  This is usually
+ * provided as an array of KeyParameters to IKeyMintDevice or Operation.
+ */
+@VintfStability
+parcelable KeyParameterArray {
+    /**
+     * Identify list of key parameters corresponding to a particular key blob.
+     */
+    KeyParameter[] params;
+}
diff --git a/keymint/aidl/android/hardware/keymint/KeyPurpose.aidl b/keymint/aidl/android/hardware/keymint/KeyPurpose.aidl
new file mode 100644
index 0000000..bc029fd
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/KeyPurpose.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+
+/**
+ * Possible purposes of a key (or pair).
+ */
+@VintfStability
+@Backing(type = "int")
+enum KeyPurpose {
+    /* Usable with RSA, EC and AES keys. */
+    ENCRYPT = 0,
+
+    /* Usable with RSA, EC and AES keys. */
+    DECRYPT = 1,
+
+    /* Usable with RSA, EC and HMAC keys. */
+    SIGN = 2,
+
+    /* Usable with RSA, EC and HMAC keys. */
+    VERIFY = 3,
+
+    /* 4 is reserved */
+    /* Usable with wrapping keys. */
+    WRAP_KEY = 5,
+
+    /* TODO(seleneh) add AGREE_KEY and ATTEST_KEY and their corresponding codes and tests later*/
+}
diff --git a/keymint/aidl/android/hardware/keymint/PaddingMode.aidl b/keymint/aidl/android/hardware/keymint/PaddingMode.aidl
new file mode 100644
index 0000000..337ed91
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/PaddingMode.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+/**
+ * TODO(seleneh) update the description.
+ *
+ * Padding modes that may be applied to plaintext for encryption operations.  This list includes
+ * padding modes for both symmetric and asymmetric algorithms.  Note that implementations should not
+ * provide all possible combinations of algorithm and padding, only the
+ * cryptographically-appropriate pairs.
+ */
+@VintfStability
+@Backing(type="int")
+enum PaddingMode {
+    NONE = 1, /* deprecated */
+    RSA_OAEP = 2,
+    RSA_PSS = 3,
+    RSA_PKCS1_1_5_ENCRYPT = 4,
+    RSA_PKCS1_1_5_SIGN = 5,
+    PKCS7 = 64,
+}
diff --git a/keymint/aidl/android/hardware/keymint/SecurityLevel.aidl b/keymint/aidl/android/hardware/keymint/SecurityLevel.aidl
new file mode 100644
index 0000000..d8de024
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/SecurityLevel.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+/**
+ * Device security levels.
+ */
+@VintfStability
+@Backing(type="int")
+enum SecurityLevel {
+    SOFTWARE = 0,
+    TRUSTED_ENVIRONMENT = 1,
+    /**
+     * STRONGBOX specifies that the secure hardware satisfies the requirements specified in CDD
+     * 9.11.2.
+     */
+    STRONGBOX = 2,
+}
diff --git a/keymint/aidl/android/hardware/keymint/Tag.aidl b/keymint/aidl/android/hardware/keymint/Tag.aidl
new file mode 100644
index 0000000..46da096
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/Tag.aidl
@@ -0,0 +1,892 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.TagType;
+
+// TODO(seleneh) : note aidl currently does not support double nested enum definitions such as
+// ROOT_OF_TRUST = TagType:BYTES | 704.  So we are forced to write definations as
+// ROOT_OF_TRUST = (9 << 28) for now.  Will need to flip this back later when aidl support is added.
+
+/**
+ * Tag specifies various kinds of tags that can be set in KeyParameter to identify what kind of
+ * data are stored in KeyParameter.
+ */
+@VintfStability
+@Backing(type = "int")
+enum Tag {
+    /**
+     * Tag::INVALID should never be set.  It means you hit an error.
+     */
+    INVALID = (0 << 28) | 0,
+
+    /**
+     * Tag::PURPOSE specifies the set of purposes for which the key may be used.  Possible values
+     * are defined in the KeyPurpose enumeration.
+     *
+     * This tag is repeatable; keys may be generated with multiple values, although an operation has
+     * a single purpose.  When begin() is called to start an operation, the purpose of the operation
+     * is specified.  If the purpose specified for the operation is not authorized by the key (the
+     * key didn't have a corresponding Tag::PURPOSE provided during generation/import), the
+     * operation must fail with ErrorCode::INCOMPATIBLE_PURPOSE.
+     *
+     * Must be hardware-enforced.
+     */
+    PURPOSE = (2 << 28) | 1, /* TagType:ENUM_REP */
+
+    /**
+     * Tag::ALGORITHM specifies the cryptographic algorithm with which the key is used.  This tag
+     * must be provided to generateKey and importKey, and must be specified in the wrapped key
+     * provided to importWrappedKey.
+     *
+     * Must be hardware-enforced.
+     */
+    ALGORITHM = (1 << 28) | 2, /* TagType:ENUM */
+
+    /**
+     * Tag::KEY_SIZE pecifies the size, in bits, of the key, measuring in the normal way for the
+     * key's algorithm.  For example, for RSA keys, Tag::KEY_SIZE specifies the size of the public
+     * modulus.  For AES keys it specifies the length of the secret key material.  For 3DES keys it
+     * specifies the length of the key material, not counting parity bits (though parity bits must
+     * be provided for import, etc.).  Since only three-key 3DES keys are supported, 3DES
+     * Tag::KEY_SIZE must be 168.
+     *
+     * Must be hardware-enforced.
+     */
+    KEY_SIZE = (3 << 28) | 3, /* TagType:UINT */
+
+    /**
+     * Tag::BLOCK_MODE specifies the block cipher mode(s) with which the key may be used.  This tag
+     * is only relevant to AES and 3DES keys.  Possible values are defined by the BlockMode enum.
+     *
+     * This tag is repeatable for key generation/import.  For AES and 3DES operations the caller
+     * must specify a Tag::BLOCK_MODE in the additionalParams argument of begin().  If the mode is
+     * missing or the specified mode is not in the modes specified for the key during
+     * generation/import, the operation must fail with ErrorCode::INCOMPATIBLE_BLOCK_MODE.
+     *
+     * Must be hardware-enforced.
+     */
+    BLOCK_MODE = (2 << 28) | 4,
+    /* BlockMode. */ /* TagType:ENUM_REP */
+
+    /**
+     * Tag::DIGEST specifies the digest algorithms that may be used with the key to perform signing
+     * and verification operations.  This tag is relevant to RSA, ECDSA and HMAC keys.  Possible
+     * values are defined by the Digest enum.
+     *
+     * This tag is repeatable for key generation/import.  For signing and verification operations,
+     * the caller must specify a digest in the additionalParams argument of begin().  If the digest
+     * is missing or the specified digest is not in the digests associated with the key, the
+     * operation must fail with ErrorCode::INCOMPATIBLE_DIGEST.
+     *
+     * Must be hardware-enforced.
+     */
+    DIGEST = (2 << 28) | 5, /* TagType:ENUM_REP */
+
+    /**
+     * Tag::PADDING specifies the padding modes that may be used with the key.  This tag is relevant
+     * to RSA, AES and 3DES keys.  Possible values are defined by the PaddingMode enum.
+     *
+     * PaddingMode::RSA_OAEP and PaddingMode::RSA_PKCS1_1_5_ENCRYPT are used only for RSA
+     * encryption/decryption keys and specify RSA OAEP padding and RSA PKCS#1 v1.5 randomized
+     * padding, respectively.  PaddingMode::RSA_PSS and PaddingMode::RSA_PKCS1_1_5_SIGN are used
+     * only for RSA signing/verification keys and specify RSA PSS padding and RSA PKCS#1 v1.5
+     * deterministic padding, respectively.
+     *
+     * PaddingMode::NONE may be used with either RSA, AES or 3DES keys.  For AES or 3DES keys, if
+     * PaddingMode::NONE is used with block mode ECB or CBC and the data to be encrypted or
+     * decrypted is not a multiple of the AES block size in length, the call to finish() must fail
+     * with ErrorCode::INVALID_INPUT_LENGTH.
+     *
+     * PaddingMode::PKCS7 may only be used with AES and 3DES keys, and only with ECB and CBC modes.
+     *
+     * In any case, if the caller specifies a padding mode that is not usable with the key's
+     * algorithm, the generation or import method must return ErrorCode::INCOMPATIBLE_PADDING_MODE.
+     *
+     * This tag is repeatable.  A padding mode must be specified in the call to begin().  If the
+     * specified mode is not authorized for the key, the operation must fail with
+     * ErrorCode::INCOMPATIBLE_BLOCK_MODE.
+     *
+     * Must be hardware-enforced.
+     */
+    PADDING = (2 << 28) | 6, /* TagType:ENUM_REP */
+
+    /**
+     * Tag::CALLER_NONCE specifies that the caller can provide a nonce for nonce-requiring
+     * operations.  This tag is boolean, so the possible values are true (if the tag is present) and
+     * false (if the tag is not present).
+     *
+     * This tag is used only for AES and 3DES keys, and is only relevant for CBC, CTR and GCM block
+     * modes.  If the tag is not present in a key's authorization list, implementations must reject
+     * any operation that provides Tag::NONCE to begin() with ErrorCode::CALLER_NONCE_PROHIBITED.
+     *
+     * Must be hardware-enforced.
+     */
+    CALLER_NONCE = (7 << 28) | 7, /* TagType:BOOL */
+
+    /**
+     * Tag::MIN_MAC_LENGTH specifies the minimum length of MAC that can be requested or verified
+     * with this key for HMAC keys and AES keys that support GCM mode.
+     *
+     * This value is the minimum MAC length, in bits.  It must be a multiple of 8 bits.  For HMAC
+     * keys, the value must be least 64 and no more than 512.  For GCM keys, the value must be at
+     * least 96 and no more than 128.  If the provided value violates these requirements,
+     * generateKey() or importKey() must return ErrorCode::UNSUPPORTED_KEY_SIZE.
+     *
+     * Must be hardware-enforced.
+     */
+    MIN_MAC_LENGTH = (3 << 28) | 8, /* TagType:UINT */
+
+    // Tag 9 reserved
+
+    /**
+     * Tag::EC_CURVE specifies the elliptic curve.  EC key generation requests may have
+     * Tag:EC_CURVE, Tag::KEY_SIZE, or both.  If both are provided and the size and curve do not
+     * match, IKeyMintDevice must return ErrorCode::INVALID_ARGUMENT.
+     *
+     * Must be hardware-enforced.
+     */
+    EC_CURVE = (1 << 28) | 10, /* TagType:ENUM */
+
+    /**
+     * Tag::RSA_PUBLIC_EXPONENT specifies the value of the public exponent for an RSA key pair.
+     * This tag is relevant only to RSA keys, and is required for all RSA keys.
+     *
+     * The value is a 64-bit unsigned integer that satisfies the requirements of an RSA public
+     * exponent.  This value must be a prime number.  IKeyMintDevice implementations must support
+     * the value 2^16+1 and may support other reasonable values.  If no exponent is specified or if
+     * the specified exponent is not supported, key generation must fail with
+     * ErrorCode::INVALID_ARGUMENT.
+     *
+     * Must be hardware-enforced.
+     */
+    RSA_PUBLIC_EXPONENT = (5 << 28) | 200, /* TagType:ULONG */
+
+    // Tag 201 reserved
+
+    /**
+     * Tag::INCLUDE_UNIQUE_ID is specified during key generation to indicate that an attestation
+     * certificate for the generated key should contain an application-scoped and time-bounded
+     * device-unique ID.  See Tag::UNIQUE_ID.
+     *
+     * Must be hardware-enforced.
+     */
+    INCLUDE_UNIQUE_ID = (7 << 28) | 202, /* TagType:BOOL */
+
+    /**
+     * TODO(seleneh) this tag needs to be deleted from all codes.
+     *
+     * Tag::BLOB_USAGE_REQUIREMENTS specifies the necessary system environment conditions for the
+     * generated key to be used.  Possible values are defined by the KeyBlobUsageRequirements enum.
+     *
+     * This tag is specified by the caller during key generation or import to require that the key
+     * is usable in the specified condition.  If the caller specifies Tag::BLOB_USAGE_REQUIREMENTS
+     * with value KeyBlobUsageRequirements::STANDALONE the IKeyMintDevice must return a key blob
+     * that can be used without file system support.  This is critical for devices with encrypted
+     * disks, where the file system may not be available until after a KeyMint key is used to
+     * decrypt the disk.
+     *
+     * Must be hardware-enforced.
+     */
+    BLOB_USAGE_REQUIREMENTS = (1 << 28) | 301, /* TagType:ENUM */
+
+    /**
+     * Tag::BOOTLOADER_ONLY specifies only the bootloader can use the key.
+     *
+     * Any attempt to use a key with Tag::BOOTLOADER_ONLY from the Android system must fail with
+     * ErrorCode::INVALID_KEY_BLOB.
+     *
+     * Must be hardware-enforced.
+     */
+    BOOTLOADER_ONLY = (7 << 28) | 302, /* TagType:BOOL */
+
+    /**
+     * Tag::ROLLBACK_RESISTANCE specifies that the key has rollback resistance, meaning that when
+     * deleted with deleteKey() or deleteAllKeys(), the key is guaranteed to be permanently deleted
+     * and unusable.  It's possible that keys without this tag could be deleted and then restored
+     * from backup.
+     *
+     * This tag is specified by the caller during key generation or import to require.  If the
+     * IKeyMintDevice cannot guarantee rollback resistance for the specified key, it must return
+     * ErrorCode::ROLLBACK_RESISTANCE_UNAVAILABLE.  IKeyMintDevice implementations are not
+     * required to support rollback resistance.
+     *
+     * Must be hardwared-enforced.
+     */
+    ROLLBACK_RESISTANCE = (7 << 28) | 303, /* TagType:BOOL */
+
+    // Reserved for future use.
+    HARDWARE_TYPE = (1 << 28) | 304, /* TagType:ENUM */
+
+    /**
+     * Keys tagged with EARLY_BOOT_ONLY may only be used, or created, during early boot, until
+     * IKeyMintDevice::earlyBootEnded() is called.
+     */
+    EARLY_BOOT_ONLY = (7 << 28) | 305, /* TagType:BOOL */
+
+    /**
+     * Tag::ACTIVE_DATETIME specifies the date and time at which the key becomes active, in
+     * milliseconds since Jan 1, 1970.  If a key with this tag is used prior to the specified date
+     * and time, IKeyMintDevice::begin() must return ErrorCode::KEY_NOT_YET_VALID;
+     *
+     * Need not be hardware-enforced.
+     */
+    ACTIVE_DATETIME = (6 << 28) | 400,
+    /* Start of validity. */ /* TagType:DATE */
+
+    /**
+     * Tag::ORIGINATION_EXPIRE_DATETIME specifies the date and time at which the key expires for
+     * signing and encryption purposes.  After this time, any attempt to use a key with
+     * KeyPurpose::SIGN or KeyPurpose::ENCRYPT provided to begin() must fail with
+     * ErrorCode::KEY_EXPIRED.
+     *
+     * The value is a 64-bit integer representing milliseconds since January 1, 1970.
+     *
+     * Need not be hardware-enforced.
+     */
+    ORIGINATION_EXPIRE_DATETIME = (6 << 28) | 401, /* TagType:DATE */
+
+    /**
+     * Tag::USAGE_EXPIRE_DATETIME specifies the date and time at which the key expires for
+     * verification and decryption purposes.  After this time, any attempt to use a key with
+     * KeyPurpose::VERIFY or KeyPurpose::DECRYPT provided to begin() must fail with
+     * ErrorCode::KEY_EXPIRED.
+     *
+     * The value is a 64-bit integer representing milliseconds since January 1, 1970.
+     *
+     * Need not be hardware-enforced.
+     */
+    USAGE_EXPIRE_DATETIME = (6 << 28) | 402, /* TagType:DATE */
+
+    /**
+     * TODO(seleneh) this tag need to be deleted.
+     *
+     * TODO(seleneh) this tag need to be deleted.
+     *
+     * Tag::MIN_SECONDS_BETWEEN_OPS specifies the minimum amount of time that elapses between
+     * allowed operations using a key.  This can be used to rate-limit uses of keys in contexts
+     * where unlimited use may enable brute force attacks.
+     *
+     * The value is a 32-bit integer representing seconds between allowed operations.
+     *
+     * When a key with this tag is used in an operation, the IKeyMintDevice must start a timer
+     * during the finish() or abort() call.  Any call to begin() that is received before the timer
+     * indicates that the interval specified by Tag::MIN_SECONDS_BETWEEN_OPS has elapsed must fail
+     * with ErrorCode::KEY_RATE_LIMIT_EXCEEDED.  This implies that the IKeyMintDevice must keep a
+     * table of use counters for keys with this tag.  Because memory is often limited, this table
+     * may have a fixed maximum size and KeyMint may fail operations that attempt to use keys with
+     * this tag when the table is full.  The table must acommodate at least 8 in-use keys and
+     * aggressively reuse table slots when key minimum-usage intervals expire.  If an operation
+     * fails because the table is full, KeyMint returns ErrorCode::TOO_MANY_OPERATIONS.
+     *
+     * Must be hardware-enforced.
+     */
+    MIN_SECONDS_BETWEEN_OPS = (3 << 28) | 403, /* TagType:UINT */
+
+    /**
+     * Tag::MAX_USES_PER_BOOT specifies the maximum number of times that a key may be used between
+     * system reboots.  This is another mechanism to rate-limit key use.
+     *
+     * The value is a 32-bit integer representing uses per boot.
+     *
+     * When a key with this tag is used in an operation, a key-associated counter must be
+     * incremented during the begin() call.  After the key counter has exceeded this value, all
+     * subsequent attempts to use the key must fail with ErrorCode::MAX_OPS_EXCEEDED, until the
+     * device is restarted.  This implies that the IKeyMintDevice must keep a table of use
+     * counters for keys with this tag.  Because KeyMint memory is often limited, this table can
+     * have a fixed maximum size and KeyMint can fail operations that attempt to use keys with
+     * this tag when the table is full.  The table needs to acommodate at least 8 keys.  If an
+     * operation fails because the table is full, IKeyMintDevice must
+     * ErrorCode::TOO_MANY_OPERATIONS.
+     *
+     * Must be hardware-enforced.
+     */
+    MAX_USES_PER_BOOT = (3 << 28) | 404, /* TagType:UINT */
+
+    /**
+     * Tag::USER_ID specifies the ID of the Android user that is permitted to use the key.
+     *
+     * Must not be hardware-enforced.
+     */
+    USER_ID = (3 << 28) | 501, /* TagType:UINT */
+
+    /**
+     * Tag::USER_SECURE_ID specifies that a key may only be used under a particular secure user
+     * authentication state.  This tag is mutually exclusive with Tag::NO_AUTH_REQUIRED.
+     *
+     * The value is a 64-bit integer specifying the authentication policy state value which must be
+     * present in the userId or authenticatorId field of a HardwareAuthToken provided to begin(),
+     * update(), or finish().  If a key with Tag::USER_SECURE_ID is used without a HardwareAuthToken
+     * with the matching userId or authenticatorId, the IKeyMintDevice must return
+     * ErrorCode::KEY_USER_NOT_AUTHENTICATED.
+     *
+     * Tag::USER_SECURE_ID interacts with Tag::AUTH_TIMEOUT in a very important way.  If
+     * Tag::AUTH_TIMEOUT is present in the key's characteristics then the key is a "timeout-based"
+     * key, and may only be used if the difference between the current time when begin() is called
+     * and the timestamp in the HardwareAuthToken is less than the value in Tag::AUTH_TIMEOUT * 1000
+     * (the multiplier is because Tag::AUTH_TIMEOUT is in seconds, but the HardwareAuthToken
+     * timestamp is in milliseconds).  Otherwise the IKeyMintDevice must returrn
+     * ErrorCode::KEY_USER_NOT_AUTHENTICATED.
+     *
+     * If Tag::AUTH_TIMEOUT is not present, then the key is an "auth-per-operation" key.  In this
+     * case, begin() must not require a HardwareAuthToken with appropriate contents.  Instead,
+     * update() and finish() must receive a HardwareAuthToken with Tag::USER_SECURE_ID value in
+     * userId or authenticatorId fields, and the current operation's operation handle in the
+     * challenge field.  Otherwise the IKeyMintDevice must returrn
+     * ErrorCode::KEY_USER_NOT_AUTHENTICATED.
+     *
+     * This tag is repeatable.  If repeated, and any one of the values matches the HardwareAuthToken
+     * as described above, the key is authorized for use.  Otherwise the operation must fail with
+     * ErrorCode::KEY_USER_NOT_AUTHENTICATED.
+     *
+     * Must be hardware-enforced.
+     */
+    USER_SECURE_ID = (10 << 28) | 502, /* TagType:ULONG_REP */
+
+    /**
+     * Tag::NO_AUTH_REQUIRED specifies that no authentication is required to use this key.  This tag
+     * is mutually exclusive with Tag::USER_SECURE_ID.
+     *
+     * Must be hardware-enforced.
+     */
+    NO_AUTH_REQUIRED = (7 << 28) | 503, /* TagType:BOOL */
+
+    /**
+     * Tag::USER_AUTH_TYPE specifies the types of user authenticators that may be used to authorize
+     * this key.
+     *
+     * The value is one or more values from HardwareAuthenticatorType, ORed together.
+     *
+     * When IKeyMintDevice is requested to perform an operation with a key with this tag, it must
+     * receive a HardwareAuthToken and one or more bits must be set in both the HardwareAuthToken's
+     * authenticatorType field and the Tag::USER_AUTH_TYPE value.  That is, it must be true that
+     *
+     *    (token.authenticatorType & tag_user_auth_type) != 0
+     *
+     * where token.authenticatorType is the authenticatorType field of the HardwareAuthToken and
+     * tag_user_auth_type is the value of Tag:USER_AUTH_TYPE.
+     *
+     * Must be hardware-enforced.
+     */
+    USER_AUTH_TYPE = (1 << 28) | 504, /* TagType:ENUM */
+
+    /**
+     * Tag::AUTH_TIMEOUT specifies the time in seconds for which the key is authorized for use,
+     * after user authentication.  If
+     * Tag::USER_SECURE_ID is present and this tag is not, then the key requies authentication for
+     * every usage (see begin() for the details of the authentication-per-operation flow).
+     *
+     * The value is a 32-bit integer specifying the time in seconds after a successful
+     * authentication of the user specified by Tag::USER_SECURE_ID with the authentication method
+     * specified by Tag::USER_AUTH_TYPE that the key can be used.
+     *
+     * Must be hardware-enforced.
+     */
+    AUTH_TIMEOUT = (3 << 28) | 505, /* TagType:UINT */
+
+    /**
+     * Tag::ALLOW_WHILE_ON_BODY specifies that the key may be used after authentication timeout if
+     * device is still on-body (requires on-body sensor).
+     *
+     * Cannot be hardware-enforced.
+     */
+    ALLOW_WHILE_ON_BODY = (7 << 28) | 506, /* TagType:BOOL */
+
+    /**
+     * TRUSTED_USER_PRESENCE_REQUIRED is an optional feature that specifies that this key must be
+     * unusable except when the user has provided proof of physical presence.  Proof of physical
+     * presence must be a signal that cannot be triggered by an attacker who doesn't have one of:
+     *
+     *    a) Physical control of the device or
+     *
+     *    b) Control of the secure environment that holds the key.
+     *
+     * For instance, proof of user identity may be considered proof of presence if it meets the
+     * requirements.  However, proof of identity established in one security domain (e.g. TEE) does
+     * not constitute proof of presence in another security domain (e.g. StrongBox), and no
+     * mechanism analogous to the authentication token is defined for communicating proof of
+     * presence across security domains.
+     *
+     * Some examples:
+     *
+     *     A hardware button hardwired to a pin on a StrongBox device in such a way that nothing
+     *     other than a button press can trigger the signal constitutes proof of physical presence
+     *     for StrongBox keys.
+     *
+     *     Fingerprint authentication provides proof of presence (and identity) for TEE keys if the
+     *     TEE has exclusive control of the fingerprint scanner and performs fingerprint matching.
+     *
+     *     Password authentication does not provide proof of presence to either TEE or StrongBox,
+     *     even if TEE or StrongBox does the password matching, because password input is handled by
+     *     the non-secure world, which means an attacker who has compromised Android can spoof
+     *     password authentication.
+     *
+     * Note that no mechanism is defined for delivering proof of presence to an IKeyMintDevice,
+     * except perhaps as implied by an auth token.  This means that KeyMint must be able to check
+     * proof of presence some other way.  Further, the proof of presence must be performed between
+     * begin() and the first call to update() or finish().  If the first update() or the finish()
+     * call is made without proof of presence, the keyMint method must return
+     * ErrorCode::PROOF_OF_PRESENCE_REQUIRED and abort the operation.  The caller must delay the
+     * update() or finish() call until proof of presence has been provided, which means the caller
+     * must also have some mechanism for verifying that the proof has been provided.
+     *
+     * Only one operation requiring TUP may be in flight at a time.  If begin() has already been
+     * called on one key with TRUSTED_USER_PRESENCE_REQUIRED, and another begin() comes in for that
+     * key or another with TRUSTED_USER_PRESENCE_REQUIRED, KeyMint must return
+     * ErrorCode::CONCURRENT_PROOF_OF_PRESENCE_REQUESTED.
+     *
+     * Must be hardware-enforced.
+     */
+    TRUSTED_USER_PRESENCE_REQUIRED = (7 << 28) | 507, /* TagType:BOOL */
+
+    /** Tag::TRUSTED_CONFIRMATION_REQUIRED is only applicable to keys with KeyPurpose SIGN, and
+     *  specifies that this key must not be usable unless the user provides confirmation of the data
+     *  to be signed.  Confirmation is proven to keyMint via an approval token.  See
+     *  CONFIRMATION_TOKEN, as well as the ConfirmatinUI HAL.
+     *
+     * If an attempt to use a key with this tag does not have a cryptographically valid
+     * CONFIRMATION_TOKEN provided to finish() or if the data provided to update()/finish() does not
+     * match the data described in the token, keyMint must return NO_USER_CONFIRMATION.
+     *
+     * Must be hardware-enforced.
+     */
+    TRUSTED_CONFIRMATION_REQUIRED = (7 << 28) | 508, /* TagType:BOOL */
+
+    /**
+     * Tag::UNLOCKED_DEVICE_REQUIRED specifies that the key may only be used when the device is
+     * unlocked.
+     *
+     * Must be software-enforced.
+     */
+    UNLOCKED_DEVICE_REQUIRED = (7 << 28) | 509, /* TagType:BOOL */
+
+    /**
+     * Tag::APPLICATION_ID.  When provided to generateKey or importKey, this tag specifies data
+     * that is necessary during all uses of the key.  In particular, calls to exportKey() and
+     * getKeyCharacteristics() must provide the same value to the clientId parameter, and calls to
+     * begin must provide this tag and the same associated data as part of the inParams set.  If
+     * the correct data is not provided, the method must return ErrorCode::INVALID_KEY_BLOB.
+     *
+     * The content of this tag must be bound to the key cryptographically, meaning it must not be
+     * possible for an adversary who has access to all of the secure world secrets but does not have
+     * access to the tag content to decrypt the key without brute-forcing the tag content, which
+     * applications can prevent by specifying sufficiently high-entropy content.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    APPLICATION_ID = (9 << 28) | 601, /* TagType:BYTES */
+
+    /*
+     * Semantically unenforceable tags, either because they have no specific meaning or because
+     * they're informational only.
+     */
+
+    /**
+     * Tag::APPLICATION_DATA.  When provided to generateKey or importKey, this tag specifies data
+     * that is necessary during all uses of the key.  In particular, calls to exportKey() and
+     * getKeyCharacteristics() must provide the same value to the appData parameter, and calls to
+     * begin must provide this tag and the same associated data as part of the inParams set.  If
+     * the correct data is not provided, the method must return ErrorCode::INVALID_KEY_BLOB.
+     *
+     * The content of this tag msut be bound to the key cryptographically, meaning it must not be
+     * possible for an adversary who has access to all of the secure world secrets but does not have
+     * access to the tag content to decrypt the key without brute-forcing the tag content, which
+     * applications can prevent by specifying sufficiently high-entropy content.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    APPLICATION_DATA = (9 << 28) | 700, /* TagType:BYTES */
+
+    /**
+     * Tag::CREATION_DATETIME specifies the date and time the key was created, in milliseconds since
+     * January 1, 1970.  This tag is optional and informational only.
+     *
+     * Tag::CREATED is informational only, and not enforced by anything.  Must be in the
+     * software-enforced list, if provided.
+     */
+    CREATION_DATETIME = (6 << 28) | 701, /* TagType:DATE */
+
+    /**
+     * Tag::ORIGIN specifies where the key was created, if known.  This tag must not be specified
+     * during key generation or import, and must be added to the key characteristics by the
+     * IKeyMintDevice.  The possible values are defined in the KeyOrigin enum.
+     *
+     * Must be hardware-enforced.
+     */
+    ORIGIN = (1 << 28) | 702, /* TagType:ENUM */
+
+    // 703 is unused.
+
+    /**
+     * Tag::ROOT_OF_TRUST specifies the root of trust associated with the key used by verified boot
+     * to validate the system.  It describes the boot key, verified boot state, boot hash, and
+     * whether device is locked.  This tag is never provided to or returned from KeyMint in the
+     * key characteristics.  It exists only to define the tag for use in the attestation record.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ROOT_OF_TRUST = (9 << 28) | 704, /* TagType:BYTES */
+
+    /**
+     * Tag::OS_VERSION specifies the system OS version with which the key may be used.  This tag is
+     * never sent to the IKeyMintDevice, but is added to the hardware-enforced authorization list
+     * by the TA.  Any attempt to use a key with a Tag::OS_VERSION value different from the
+     * currently-running OS version must cause begin(), getKeyCharacteristics() or exportKey() to
+     * return ErrorCode::KEY_REQUIRES_UPGRADE.  See upgradeKey() for details.
+     *
+     * The value of the tag is an integer of the form MMmmss, where MM is the major version number,
+     * mm is the minor version number, and ss is the sub-minor version number.  For example, for a
+     * key generated on Android version 4.0.3, the value would be 040003.
+     *
+     * The IKeyMintDevice HAL must read the current OS version from the system property
+     * ro.build.version.release and deliver it to the secure environment when the HAL is first
+     * loaded (mechanism is implementation-defined).  The secure environment must not accept another
+     * version until after the next boot.  If the content of ro.build.version.release has additional
+     * version information after the sub-minor version number, it must not be included in
+     * Tag::OS_VERSION.  If the content is non-numeric, the secure environment must use 0 as the
+     * system version.
+     *
+     * Must be hardware-enforced.
+     */
+    OS_VERSION = (3 << 28) | 705, /* TagType:UINT */
+
+    /**
+     * Tag::OS_PATCHLEVEL specifies the system security patch level with which the key may be used.
+     * This tag is never sent to the keyMint TA, but is added to the hardware-enforced
+     * authorization list by the TA.  Any attempt to use a key with a Tag::OS_PATCHLEVEL value
+     * different from the currently-running system patchlevel must cause begin(),
+     * getKeyCharacteristics() or exportKey() to return ErrorCode::KEY_REQUIRES_UPGRADE.  See
+     * upgradeKey() for details.
+     *
+     * The value of the tag is an integer of the form YYYYMM, where YYYY is the four-digit year of
+     * the last update and MM is the two-digit month of the last update.  For example, for a key
+     * generated on an Android device last updated in December 2015, the value would be 201512.
+     *
+     * The IKeyMintDevice HAL must read the current system patchlevel from the system property
+     * ro.build.version.security_patch and deliver it to the secure environment when the HAL is
+     * first loaded (mechanism is implementation-defined).  The secure environment must not accept
+     * another patchlevel until after the next boot.
+     *
+     * Must be hardware-enforced.
+     */
+    OS_PATCHLEVEL = (3 << 28) | 706, /* TagType:UINT */
+
+    /**
+     * Tag::UNIQUE_ID specifies a unique, time-based identifier.  This tag is never provided to or
+     * returned from KeyMint in the key characteristics.  It exists only to define the tag for use
+     * in the attestation record.
+     *
+     * When a key with Tag::INCLUDE_UNIQUE_ID is attested, the unique ID is added to the attestation
+     * record.  The value is a 128-bit hash that is unique per device and per calling application,
+     * and changes monthly and on most password resets.  It is computed with:
+     *
+     *    HMAC_SHA256(T || C || R, HBK)
+     *
+     * Where:
+     *
+     *    T is the "temporal counter value", computed by dividing the value of
+     *      Tag::CREATION_DATETIME by 2592000000, dropping any remainder.  T changes every 30 days
+     *      (2592000000 = 30 * 24 * 60 * 60 * 1000).
+     *
+     *    C is the value of Tag::ATTESTATION_APPLICATION_ID that is provided to attestKey().
+     *
+     *    R is 1 if Tag::RESET_SINCE_ID_ROTATION was provided to attestKey or 0 if the tag was not
+     *      provided.
+     *
+     *    HBK is a unique hardware-bound secret known to the secure environment and never revealed
+     *    by it.  The secret must contain at least 128 bits of entropy and be unique to the
+     *    individual device (probabilistic uniqueness is acceptable).
+     *
+     *    HMAC_SHA256 is the HMAC function, with SHA-2-256 as the hash.
+     *
+     * The output of the HMAC function must be truncated to 128 bits.
+     *
+     * Must be hardware-enforced.
+     */
+    UNIQUE_ID = (9 << 28) | 707, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_CHALLENGE is used to deliver a "challenge" value to the attestKey() method,
+     * which must place the value in the KeyDescription SEQUENCE of the attestation extension.  See
+     * attestKey().
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_CHALLENGE = (9 << 28) | 708, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_APPLICATION_ID identifies the set of applications which may use a key, used
+     * only with attestKey().
+     *
+     * The content of Tag::ATTESTATION_APPLICATION_ID is a DER-encoded ASN.1 structure, with the
+     * following schema:
+     *
+     * AttestationApplicationId ::= SEQUENCE {
+     *     packageInfoRecords SET OF PackageInfoRecord,
+     *     signatureDigests   SET OF OCTET_STRING,
+     * }
+     *
+     * PackageInfoRecord ::= SEQUENCE {
+     *     packageName        OCTET_STRING,
+     *     version            INTEGER,
+     * }
+     *
+     * See system/security/keystore/keystore_attestation_id.cpp for details of construction.
+     * IKeyMintDevice implementers do not need to create or parse the ASN.1 structure, but only
+     * copy the tag value into the attestation record.  The DER-encoded string must not exceed 1 KiB
+     * in length.
+     *
+     * Cannot be hardware-enforced.
+     */
+    ATTESTATION_APPLICATION_ID = (9 << 28) | 709, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_BRAND provides the device's brand name, as returned by Build.BRAND in
+     * Android, to attestKey().  This field must be set only when requesting attestation of the
+     * device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_BRAND = (9 << 28) | 710, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_DEVICE provides the device's device name, as returned by Build.DEVICE in
+     * Android, to attestKey().  This field must be set only when requesting attestation of the
+     * device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_DEVICE = (9 << 28) | 711, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_PRODUCT provides the device's product name, as returned by Build.PRODUCT
+     * in Android, to attestKey().  This field must be set only when requesting attestation of the
+     * device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_PRODUCT = (9 << 28) | 712, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_SERIAL the device's serial number.  This field must be set only when
+     * requesting attestation of the device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_SERIAL = (9 << 28) | 713, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_IMEI provides the IMEIs for all radios on the device to attestKey().
+     * This field must be set only when requesting attestation of the device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_IMEI = (9 << 28) | 714, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_MEID provides the MEIDs for all radios on the device to attestKey().
+     * This field must be set only when requesting attestation of the device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_MEID = (9 << 28) | 715, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_MANUFACTURER provides the device's manufacturer name, as returned by
+     * Build.MANUFACTURER in Android, to attstKey().  This field must be set only when requesting
+     * attestation of the device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_MANUFACTURER = (9 << 28) | 716, /* TagType:BYTES */
+
+    /**
+     * Tag::ATTESTATION_ID_MODEL provides the device's model name, as returned by Build.MODEL in
+     * Android, to attestKey().  This field must be set only when requesting attestation of the
+     * device's identifiers.
+     *
+     * If the device does not support ID attestation (or destroyAttestationIds() was previously
+     * called and the device can no longer attest its IDs), any key attestation request that
+     * includes this tag must fail with ErrorCode::CANNOT_ATTEST_IDS.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    ATTESTATION_ID_MODEL = (9 << 28) | 717, /* TagType:BYTES */
+
+    /**
+     * Tag::VENDOR_PATCHLEVEL specifies the vendor image security patch level with which the key may
+     * be used.  This tag is never sent to the keyMint TA, but is added to the hardware-enforced
+     * authorization list by the TA.  Any attempt to use a key with a Tag::VENDOR_PATCHLEVEL value
+     * different from the currently-running system patchlevel must cause begin(),
+     * getKeyCharacteristics() or exportKey() to return ErrorCode::KEY_REQUIRES_UPGRADE.  See
+     * upgradeKey() for details.
+     *
+     * The value of the tag is an integer of the form YYYYMMDD, where YYYY is the four-digit year of
+     * the last update, MM is the two-digit month and DD is the two-digit day of the last
+     * update.  For example, for a key generated on an Android device last updated on June 5, 2018,
+     * the value would be 20180605.
+     *
+     * The IKeyMintDevice HAL must read the current vendor patchlevel from the system property
+     * ro.vendor.build.security_patch and deliver it to the secure environment when the HAL is first
+     * loaded (mechanism is implementation-defined).  The secure environment must not accept another
+     * patchlevel until after the next boot.
+     *
+     * Must be hardware-enforced.
+     */
+    VENDOR_PATCHLEVEL = (3 << 28) | 718, /* TagType:UINT */
+
+    /**
+     * Tag::BOOT_PATCHLEVEL specifies the boot image (kernel) security patch level with which the
+     * key may be used.  This tag is never sent to the keyMint TA, but is added to the
+     * hardware-enforced authorization list by the TA.  Any attempt to use a key with a
+     * Tag::BOOT_PATCHLEVEL value different from the currently-running system patchlevel must
+     * cause begin(), getKeyCharacteristics() or exportKey() to return
+     * ErrorCode::KEY_REQUIRES_UPGRADE.  See upgradeKey() for details.
+     *
+     * The value of the tag is an integer of the form YYYYMMDD, where YYYY is the four-digit year of
+     * the last update, MM is the two-digit month and DD is the two-digit day of the last
+     * update.  For example, for a key generated on an Android device last updated on June 5, 2018,
+     * the value would be 20180605.  If the day is not known, 00 may be substituted.
+     *
+     * During each boot, the bootloader must provide the patch level of the boot image to the secure
+     * envirionment (mechanism is implementation-defined).
+     *
+     * Must be hardware-enforced.
+     */
+    BOOT_PATCHLEVEL = (3 << 28) | 719, /* TagType:UINT */
+
+    /**
+     * DEVICE_UNIQUE_ATTESTATION is an argument to IKeyMintDevice::attestKey().  It indicates that
+     * attestation using a device-unique key is requested, rather than a batch key.  When a
+     * device-unique key is used, only the attestation certificate is returned; no additional
+     * chained certificates are provided.  It's up to the caller to recognize the device-unique
+     * signing key.  Only SecurityLevel::STRONGBOX IKeyMintDevices may support device-unique
+     * attestations.  SecurityLevel::TRUSTED_ENVIRONMENT IKeyMintDevices must return
+     * ErrorCode::INVALID_ARGUMENT if they receive DEVICE_UNIQUE_ATTESTATION.
+     * SecurityLevel::STRONGBOX IKeyMintDevices need not support DEVICE_UNIQUE_ATTESTATION, and
+     * return ErrorCode::CANNOT_ATTEST_IDS if they do not support it.
+     *
+     * IKeyMintDevice implementations that support device-unique attestation MUST add the
+     * DEVICE_UNIQUE_ATTESTATION tag to device-unique attestations.
+     */
+    DEVICE_UNIQUE_ATTESTATION = (7 << 28) | 720, /* TagType:BOOL */
+
+    /**
+     * IDENTITY_CREDENTIAL_KEY is never used by IKeyMintDevice, is not a valid argument to key
+     * generation or any operation, is never returned by any method and is never used in a key
+     * attestation.  It is used in attestations produced by the IIdentityCredential HAL when that
+     * HAL attests to Credential Keys.  IIdentityCredential produces KeyMint-style attestations.
+     */
+    IDENTITY_CREDENTIAL_KEY = (7 << 28) | 721, /* TagType:BOOL */
+
+    /**
+     * To prevent keys from being compromised if an attacker acquires read access to system / kernel
+     * memory, some inline encryption hardware supports protecting storage encryption keys in
+     * hardware without software having access to or the ability to set the plaintext keys.
+     * Instead, software only sees wrapped version of these keys.
+     *
+     * STORAGE_KEY is used to denote that a key generated or imported is a key used for storage
+     * encryption. Keys of this type can either be generated or imported or secure imported using
+     * keyMint. exportKey() can be used to re-wrap storage key with a per-boot ephemeral key
+     * wrapped key once the key characteristics are enforced.
+     *
+     * Keys with this tag cannot be used for any operation within keyMint.
+     * ErrorCode::INVALID_OPERATION is returned when a key with Tag::STORAGE_KEY is provided to
+     * begin().
+     */
+    STORAGE_KEY = (7 << 28) | 722, /* TagType:BOOL */
+
+    /**
+     * Tag::ASSOCIATED_DATA Provides "associated data" for AES-GCM encryption or decryption.  This
+     * tag is provided to update and specifies data that is not encrypted/decrypted, but is used in
+     * computing the GCM tag.
+     *
+     * Must never appear KeyCharacteristics.
+     */
+    ASSOCIATED_DATA = (9 << 28) | 1000, /* TagType:BYTES */
+
+    /**
+     * Tag::NONCE is used to provide or return a nonce or Initialization Vector (IV) for AES-GCM,
+     * AES-CBC, AES-CTR, or 3DES-CBC encryption or decryption.  This tag is provided to begin during
+     * encryption and decryption operations.  It is only provided to begin if the key has
+     * Tag::CALLER_NONCE.  If not provided, an appropriate nonce or IV must be randomly generated by
+     * KeyMint and returned from begin.
+     *
+     * The value is a blob, an arbitrary-length array of bytes.  Allowed lengths depend on the mode:
+     * GCM nonces are 12 bytes in length; AES-CBC and AES-CTR IVs are 16 bytes in length, 3DES-CBC
+     * IVs are 8 bytes in length.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    NONCE = (9 << 28) | 1001, /* TagType:BYTES */
+
+    /**
+     * Tag::MAC_LENGTH provides the requested length of a MAC or GCM authentication tag, in bits.
+     *
+     * The value is the MAC length in bits.  It must be a multiple of 8 and at least as large as the
+     * value of Tag::MIN_MAC_LENGTH associated with the key.  Otherwise, begin() must return
+     * ErrorCode::INVALID_MAC_LENGTH.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    MAC_LENGTH = (3 << 28) | 1003, /* TagType:UINT */
+
+    /**
+     * Tag::RESET_SINCE_ID_ROTATION specifies whether the device has been factory reset since the
+     * last unique ID rotation.  Used for key attestation.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    RESET_SINCE_ID_ROTATION = (7 << 28) | 1004, /* TagType:BOOL */
+
+    /**
+     * Tag::CONFIRMATION_TOKEN is used to deliver a cryptographic token proving that the user
+     * confirmed a signing request.  The content is a full-length HMAC-SHA256 value.  See the
+     * ConfirmationUI HAL for details of token computation.
+     *
+     * Must never appear in KeyCharacteristics.
+     */
+    CONFIRMATION_TOKEN = (9 << 28) | 1005, /* TagType:BYTES */
+}
diff --git a/keymint/aidl/android/hardware/keymint/TagType.aidl b/keymint/aidl/android/hardware/keymint/TagType.aidl
new file mode 100644
index 0000000..fb50b10
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/TagType.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+/**
+ * TagType classifies Tags in Tag.aidl into various groups of data.
+ */
+@VintfStability
+@Backing(type="int")
+enum TagType {
+    /** Invalid type, used to designate a tag as uninitialized. */
+    INVALID = 0 << 28,
+    /** Enumeration value. */
+    ENUM = 1 << 28,
+    /** Repeatable enumeration value. */
+    ENUM_REP = 2 << 28,
+    /** 32-bit unsigned integer. */
+    UINT = 3 << 28,
+    /** Repeatable 32-bit unsigned integer. */
+    UINT_REP = 4 << 28,
+    /** 64-bit unsigned integer. */
+    ULONG = 5 << 28,
+    /** 64-bit unsigned integer representing a date and time, in milliseconds since 1 Jan 1970. */
+    DATE = 6 << 28,
+    /** Boolean.  If a tag with this type is present, the value is "true".  If absent, "false". */
+    BOOL = 7 << 28,
+    /** Byte string containing an arbitrary-length integer, big-endian ordering. */
+    BIGNUM = 8 << 28,
+    /** Byte string */
+    BYTES = 9 << 28,
+    /** Repeatable 64-bit unsigned integer */
+    ULONG_REP = 10 << 28,
+}
diff --git a/keymint/aidl/android/hardware/keymint/Timestamp.aidl b/keymint/aidl/android/hardware/keymint/Timestamp.aidl
new file mode 100644
index 0000000..7c882c6
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/Timestamp.aidl
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+/**
+ * Time in milliseconds since some arbitrary point in time.  Time must be monotonically increasing,
+ * and a secure environment's notion of "current time" must not repeat until the Android device
+ * reboots, or until at least 50 million years have elapsed (note that this requirement is satisfied
+ * by setting the clock to zero during each boot, and then counting time accurately).
+ */
+@VintfStability
+parcelable Timestamp {
+    long milliSeconds;
+}
diff --git a/keymint/aidl/android/hardware/keymint/VerificationToken.aidl b/keymint/aidl/android/hardware/keymint/VerificationToken.aidl
new file mode 100644
index 0000000..736c0e2
--- /dev/null
+++ b/keymint/aidl/android/hardware/keymint/VerificationToken.aidl
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.keymint;
+
+import android.hardware.keymint.SecurityLevel;
+import android.hardware.keymint.Timestamp;
+
+/**
+ * VerificationToken instances are used for secure environments to authenticate one another.
+ *
+ * This version of the parcelable currently don't use the parametersVerified field since it's not
+ * needed for time-based verification. This can be added in a later version, if needed.
+ */
+@VintfStability
+parcelable VerificationToken {
+    /**
+     * The operation handle, used to ensure freshness.
+     */
+    long challenge;
+
+    /**
+     * The current time of the secure environment that generates the VerificationToken.  This can be
+     * checked against auth tokens generated by the same secure environment, which avoids needing to
+     * synchronize clocks.
+     */
+    Timestamp timestamp;
+
+    /**
+     * SecurityLevel of the secure environment that generated the token.
+     */
+    SecurityLevel securityLevel;
+
+    /**
+     * 32-byte HMAC-SHA256 of the above values, computed as:
+     *
+     *    HMAC(H,
+     *         "Auth Verification" || challenge || timestamp || securityLevel || parametersVerified)
+     *
+     * where:
+     *
+     *   ``HMAC'' is the shared HMAC key (see computeSharedHmac() in IKeyMint).
+     *
+     *   ``||'' represents concatenation
+     *
+     * The representation of challenge and timestamp is as 64-bit unsigned integers in big-endian
+     * order.  securityLevel is represented as a 32-bit unsigned integer in big-endian order.
+     *
+     * If parametersVerified is non-empty, the representation of parametersVerified is an ASN.1 DER
+     * encoded representation of the values.  The ASN.1 schema used is the AuthorizationList schema
+     * from the Keystore attestation documentation.  If parametersVerified is empty, it is simply
+     * omitted from the HMAC computation.
+     */
+    byte[] mac;
+}
diff --git a/keymint/aidl/default/Android.bp b/keymint/aidl/default/Android.bp
new file mode 100644
index 0000000..539ca47
--- /dev/null
+++ b/keymint/aidl/default/Android.bp
@@ -0,0 +1,26 @@
+cc_binary {
+    name: "android.hardware.keymint@1.0-service",
+    relative_install_path: "hw",
+    init_rc: ["android.hardware.keymint@1.0-service.rc"],
+    vintf_fragments: ["android.hardware.keymint@1.0-service.xml"],
+    vendor: true,
+    cflags: [
+        "-Wall",
+        "-Wextra",
+    ],
+    shared_libs: [
+        "android.hardware.keymint-ndk_platform",
+        "libbase",
+        "libbinder_ndk",
+        "libcppbor",
+        "libcrypto",
+        "liblog",
+        "libkeymaster_portable",
+        "libkeymint1",
+        "libpuresoftkeymasterdevice",
+        "libutils",
+    ],
+    srcs: [
+        "service.cpp",
+    ],
+}
diff --git a/keymint/aidl/default/android.hardware.keymint@1.0-service.rc b/keymint/aidl/default/android.hardware.keymint@1.0-service.rc
new file mode 100644
index 0000000..92dce88
--- /dev/null
+++ b/keymint/aidl/default/android.hardware.keymint@1.0-service.rc
@@ -0,0 +1,3 @@
+service vendor.keymint-default /vendor/bin/hw/android.hardware.keymint@1.0-service
+    class early_hal
+    user nobody
diff --git a/keymint/aidl/default/android.hardware.keymint@1.0-service.xml b/keymint/aidl/default/android.hardware.keymint@1.0-service.xml
new file mode 100644
index 0000000..3935b5a
--- /dev/null
+++ b/keymint/aidl/default/android.hardware.keymint@1.0-service.xml
@@ -0,0 +1,6 @@
+<manifest version="1.0" type="device">
+    <hal format="aidl">
+        <name>android.hardware.keymint</name>
+        <fqname>IKeyMintDevice/default</fqname>
+    </hal>
+</manifest>
diff --git a/keymint/aidl/default/service.cpp b/keymint/aidl/default/service.cpp
new file mode 100644
index 0000000..ca5555e
--- /dev/null
+++ b/keymint/aidl/default/service.cpp
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2020, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.keymint1-service"
+
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+#include <AndroidKeyMint1Device.h>
+#include <keymaster/soft_keymaster_logger.h>
+
+using aidl::android::hardware::keymint::SecurityLevel;
+using aidl::android::hardware::keymint::V1_0::AndroidKeyMint1Device;
+
+int main() {
+    // Zero threads seems like a useless pool, but below we'll join this thread to it, increasing
+    // the pool size to 1.
+    ABinderProcess_setThreadPoolMaxThreadCount(0);
+    std::shared_ptr<AndroidKeyMint1Device> km5 =
+            ndk::SharedRefBase::make<AndroidKeyMint1Device>(SecurityLevel::SOFTWARE);
+
+    keymaster::SoftKeymasterLogger logger;
+    const auto instanceName = std::string(AndroidKeyMint1Device::descriptor) + "/default";
+    LOG(INFO) << "instance: " << instanceName;
+    binder_status_t status =
+            AServiceManager_addService(km5->asBinder().get(), instanceName.c_str());
+    CHECK(status == STATUS_OK);
+
+    ABinderProcess_joinThreadPool();
+    return EXIT_FAILURE;  // should not reach
+}
diff --git a/keymint/aidl/vts/functional/Android.bp b/keymint/aidl/vts/functional/Android.bp
new file mode 100644
index 0000000..9ee8239
--- /dev/null
+++ b/keymint/aidl/vts/functional/Android.bp
@@ -0,0 +1,66 @@
+//
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_test {
+    name: "VtsAidlKeyMintV1_0TargetTest",
+    defaults: [
+        "VtsHalTargetTestDefaults",
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: [
+        "keyMint1Test.cpp",
+        "VerificationTokenTest.cpp",
+    ],
+    shared_libs: [
+        "libbinder",
+        "libcrypto",
+        "libkeymint1",
+        "libkeymintSupport",
+    ],
+    static_libs: [
+        "android.hardware.keymint-cpp",
+        "libcppbor",
+        "libkeyMint1VtsTestUtil",
+    ],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+}
+
+cc_test_library {
+    name: "libkeyMint1VtsTestUtil",
+    defaults: [
+        "VtsHalTargetTestDefaults",
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: [
+        "KeyMintAidlTestBase.cpp",
+    ],
+    export_include_dirs: [
+        ".",
+    ],
+    shared_libs: [
+        "libbinder",
+        "libcrypto",
+        "libkeymint1",
+        "libkeymintSupport",
+    ],
+    static_libs: [
+        "android.hardware.keymint-cpp",
+        "libcppbor",
+    ],
+}
diff --git a/keymint/aidl/vts/functional/AndroidTest.xml b/keymint/aidl/vts/functional/AndroidTest.xml
new file mode 100644
index 0000000..43e7a8a
--- /dev/null
+++ b/keymint/aidl/vts/functional/AndroidTest.xml
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsAidlKeyMintV1_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsAidlKeyMintV1_0TargetTest->/data/local/tmp/VtsAidlKeyMintV1_0TargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsAidlKeyMintV1_0TargetTest" />
+        <option name="native-test-timeout" value="900000"/>
+    </test>
+</configuration>
diff --git a/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp b/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
new file mode 100644
index 0000000..0546149
--- /dev/null
+++ b/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
@@ -0,0 +1,756 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "KeyMintAidlTestBase.h"
+
+#include <chrono>
+#include <vector>
+
+#include <android-base/logging.h>
+
+#include <keymintSupport/key_param_output.h>
+#include <keymintSupport/keymint_utils.h>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+using namespace std::literals::chrono_literals;
+using std::endl;
+using std::optional;
+
+::std::ostream& operator<<(::std::ostream& os, const AuthorizationSet& set) {
+    if (set.size() == 0)
+        os << "(Empty)" << ::std::endl;
+    else {
+        os << "\n";
+        for (size_t i = 0; i < set.size(); ++i) os << set[i] << ::std::endl;
+    }
+    return os;
+}
+
+namespace test {
+
+ErrorCode KeyMintAidlTestBase::GetReturnErrorCode(Status result) {
+    if (result.isOk()) return ErrorCode::OK;
+
+    if (result.exceptionCode() == binder::Status::EX_SERVICE_SPECIFIC) {
+        return static_cast<ErrorCode>(result.serviceSpecificErrorCode());
+    }
+
+    return ErrorCode::UNKNOWN_ERROR;
+}
+
+void KeyMintAidlTestBase::InitializeKeyMint(sp<IKeyMintDevice> keyMint) {
+    ASSERT_NE(keyMint, nullptr);
+    keymint_ = keyMint;
+
+    KeyMintHardwareInfo info;
+    ASSERT_TRUE(keymint_->getHardwareInfo(&info).isOk());
+
+    securityLevel_ = info.securityLevel;
+    name_.assign(info.keyMintName.begin(), info.keyMintName.end());
+    author_.assign(info.keyMintAuthorName.begin(), info.keyMintAuthorName.end());
+
+    os_version_ = getOsVersion();
+    os_patch_level_ = getOsPatchlevel();
+}
+
+void KeyMintAidlTestBase::SetUp() {
+    InitializeKeyMint(
+            android::waitForDeclaredService<IKeyMintDevice>(String16(GetParam().c_str())));
+}
+
+ErrorCode KeyMintAidlTestBase::GenerateKey(const AuthorizationSet& key_desc,
+                                           vector<uint8_t>* keyBlob, KeyCharacteristics* keyChar) {
+    EXPECT_NE(keyBlob, nullptr) << "Key blob pointer must not be null.  Test bug";
+    EXPECT_NE(keyChar, nullptr)
+            << "Previous characteristics not deleted before generating key.  Test bug.";
+
+    // Aidl does not clear these output parameters if the function returns
+    // error.  This is different from hal where output parameter is always
+    // cleared due to hal returning void.  So now we need to do our own clearing
+    // of the output variables prior to calling keyMint aidl libraries.
+    keyBlob->clear();
+    keyChar->softwareEnforced.clear();
+    keyChar->hardwareEnforced.clear();
+    certChain_.clear();
+
+    Status result;
+    ByteArray blob;
+
+    result = keymint_->generateKey(key_desc.vector_data(), &blob, keyChar, &certChain_);
+
+    // On result, blob & characteristics should be empty.
+    if (result.isOk()) {
+        if (SecLevel() != SecurityLevel::SOFTWARE) {
+            EXPECT_GT(keyChar->hardwareEnforced.size(), 0);
+        }
+        EXPECT_GT(keyChar->softwareEnforced.size(), 0);
+        // TODO(seleneh) in a later version where we return @nullable
+        // single Certificate, check non-null single certificate is always
+        // non-empty.
+        *keyBlob = blob.data;
+    }
+
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::GenerateKey(const AuthorizationSet& key_desc) {
+    return GenerateKey(key_desc, &key_blob_, &key_characteristics_);
+}
+
+ErrorCode KeyMintAidlTestBase::ImportKey(const AuthorizationSet& key_desc, KeyFormat format,
+                                         const string& key_material, vector<uint8_t>* key_blob,
+                                         KeyCharacteristics* key_characteristics) {
+    Status result;
+
+    certChain_.clear();
+    key_characteristics->softwareEnforced.clear();
+    key_characteristics->hardwareEnforced.clear();
+    key_blob->clear();
+
+    ByteArray blob;
+    result = keymint_->importKey(key_desc.vector_data(), format,
+                                 vector<uint8_t>(key_material.begin(), key_material.end()), &blob,
+                                 key_characteristics, &certChain_);
+
+    if (result.isOk()) {
+        if (SecLevel() != SecurityLevel::SOFTWARE) {
+            EXPECT_GT(key_characteristics->hardwareEnforced.size(), 0);
+        }
+        EXPECT_GT(key_characteristics->softwareEnforced.size(), 0);
+        *key_blob = blob.data;
+    }
+
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::ImportKey(const AuthorizationSet& key_desc, KeyFormat format,
+                                         const string& key_material) {
+    return ImportKey(key_desc, format, key_material, &key_blob_, &key_characteristics_);
+}
+
+ErrorCode KeyMintAidlTestBase::ImportWrappedKey(string wrapped_key, string wrapping_key,
+                                                const AuthorizationSet& wrapping_key_desc,
+                                                string masking_key,
+                                                const AuthorizationSet& unwrapping_params) {
+    Status result;
+    EXPECT_EQ(ErrorCode::OK, ImportKey(wrapping_key_desc, KeyFormat::PKCS8, wrapping_key));
+
+    ByteArray outBlob;
+    key_characteristics_.softwareEnforced.clear();
+    key_characteristics_.hardwareEnforced.clear();
+
+    result = keymint_->importWrappedKey(vector<uint8_t>(wrapped_key.begin(), wrapped_key.end()),
+                                        key_blob_,
+                                        vector<uint8_t>(masking_key.begin(), masking_key.end()),
+                                        unwrapping_params.vector_data(), 0 /* passwordSid */,
+                                        0 /* biometricSid */, &outBlob, &key_characteristics_);
+
+    if (result.isOk()) {
+        key_blob_ = outBlob.data;
+        if (SecLevel() != SecurityLevel::SOFTWARE) {
+            EXPECT_GT(key_characteristics_.hardwareEnforced.size(), 0);
+        }
+        EXPECT_GT(key_characteristics_.softwareEnforced.size(), 0);
+    }
+
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::DeleteKey(vector<uint8_t>* key_blob, bool keep_key_blob) {
+    Status result = keymint_->deleteKey(*key_blob);
+    if (!keep_key_blob) {
+        *key_blob = vector<uint8_t>();
+    }
+
+    EXPECT_TRUE(result.isOk()) << result.serviceSpecificErrorCode() << endl;
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::DeleteKey(bool keep_key_blob) {
+    return DeleteKey(&key_blob_, keep_key_blob);
+}
+
+ErrorCode KeyMintAidlTestBase::DeleteAllKeys() {
+    Status result = keymint_->deleteAllKeys();
+    EXPECT_TRUE(result.isOk()) << result.serviceSpecificErrorCode() << endl;
+    return GetReturnErrorCode(result);
+}
+
+void KeyMintAidlTestBase::CheckedDeleteKey(vector<uint8_t>* key_blob, bool keep_key_blob) {
+    ErrorCode result = DeleteKey(key_blob, keep_key_blob);
+    EXPECT_TRUE(result == ErrorCode::OK || result == ErrorCode::UNIMPLEMENTED) << result << endl;
+}
+
+void KeyMintAidlTestBase::CheckedDeleteKey() {
+    CheckedDeleteKey(&key_blob_);
+}
+
+ErrorCode KeyMintAidlTestBase::Begin(KeyPurpose purpose, const vector<uint8_t>& key_blob,
+                                     const AuthorizationSet& in_params,
+                                     AuthorizationSet* out_params, sp<IKeyMintOperation>& op) {
+    SCOPED_TRACE("Begin");
+    Status result;
+    BeginResult out;
+    result = keymint_->begin(purpose, key_blob, in_params.vector_data(), HardwareAuthToken(), &out);
+
+    if (result.isOk()) {
+        *out_params = out.params;
+        challenge_ = out.challenge;
+        op = out.operation;
+    }
+
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::Begin(KeyPurpose purpose, const vector<uint8_t>& key_blob,
+                                     const AuthorizationSet& in_params,
+                                     AuthorizationSet* out_params) {
+    SCOPED_TRACE("Begin");
+    Status result;
+    BeginResult out;
+
+    result = keymint_->begin(purpose, key_blob, in_params.vector_data(), HardwareAuthToken(), &out);
+
+    if (result.isOk()) {
+        *out_params = out.params;
+        challenge_ = out.challenge;
+        op_ = out.operation;
+    }
+
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::Begin(KeyPurpose purpose, const AuthorizationSet& in_params,
+                                     AuthorizationSet* out_params) {
+    SCOPED_TRACE("Begin");
+    EXPECT_EQ(nullptr, op_);
+    return Begin(purpose, key_blob_, in_params, out_params);
+}
+
+ErrorCode KeyMintAidlTestBase::Begin(KeyPurpose purpose, const AuthorizationSet& in_params) {
+    SCOPED_TRACE("Begin");
+    AuthorizationSet out_params;
+    ErrorCode result = Begin(purpose, in_params, &out_params);
+    EXPECT_TRUE(out_params.empty());
+    return result;
+}
+
+ErrorCode KeyMintAidlTestBase::Update(const AuthorizationSet& in_params, const string& input,
+                                      AuthorizationSet* out_params, string* output,
+                                      int32_t* input_consumed) {
+    SCOPED_TRACE("Update");
+
+    Status result;
+    EXPECT_NE(op_, nullptr);
+    if (!op_) {
+        return ErrorCode::UNEXPECTED_NULL_POINTER;
+    }
+
+    KeyParameterArray key_params;
+    key_params.params = in_params.vector_data();
+
+    KeyParameterArray in_keyParams;
+    in_keyParams.params = in_params.vector_data();
+
+    optional<KeyParameterArray> out_keyParams;
+    optional<ByteArray> o_put;
+    result = op_->update(in_keyParams, vector<uint8_t>(input.begin(), input.end()), {}, {},
+                         &out_keyParams, &o_put, input_consumed);
+
+    if (result.isOk()) {
+        if (o_put) {
+            output->append(o_put->data.begin(), o_put->data.end());
+        }
+
+        if (out_keyParams) {
+            out_params->push_back(AuthorizationSet(out_keyParams->params));
+        }
+    }
+
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::Update(const string& input, string* out, int32_t* input_consumed) {
+    SCOPED_TRACE("Update");
+    AuthorizationSet out_params;
+    ErrorCode result =
+            Update(AuthorizationSet() /* in_params */, input, &out_params, out, input_consumed);
+    EXPECT_TRUE(out_params.empty());
+    return result;
+}
+
+ErrorCode KeyMintAidlTestBase::Finish(const AuthorizationSet& in_params, const string& input,
+                                      const string& signature, AuthorizationSet* out_params,
+                                      string* output) {
+    SCOPED_TRACE("Finish");
+    Status result;
+
+    EXPECT_NE(op_, nullptr);
+    if (!op_) {
+        return ErrorCode::UNEXPECTED_NULL_POINTER;
+    }
+
+    KeyParameterArray key_params;
+    key_params.params = in_params.vector_data();
+
+    KeyParameterArray in_keyParams;
+    in_keyParams.params = in_params.vector_data();
+
+    optional<KeyParameterArray> out_keyParams;
+    optional<vector<uint8_t>> o_put;
+
+    vector<uint8_t> oPut;
+    result = op_->finish(in_keyParams, vector<uint8_t>(input.begin(), input.end()),
+                         vector<uint8_t>(signature.begin(), signature.end()), {}, {},
+                         &out_keyParams, &oPut);
+
+    if (result.isOk()) {
+        if (out_keyParams) {
+            out_params->push_back(AuthorizationSet(out_keyParams->params));
+        }
+
+        output->append(oPut.begin(), oPut.end());
+    }
+
+    op_.clear();  // So dtor doesn't Abort().
+    return GetReturnErrorCode(result);
+}
+
+ErrorCode KeyMintAidlTestBase::Finish(const string& message, string* output) {
+    SCOPED_TRACE("Finish");
+    AuthorizationSet out_params;
+    string finish_output;
+    ErrorCode result = Finish(AuthorizationSet() /* in_params */, message, "" /* signature */,
+                              &out_params, output);
+    if (result != ErrorCode::OK) {
+        return result;
+    }
+    EXPECT_EQ(0U, out_params.size());
+    return result;
+}
+
+ErrorCode KeyMintAidlTestBase::Finish(const string& message, const string& signature,
+                                      string* output) {
+    SCOPED_TRACE("Finish");
+    AuthorizationSet out_params;
+    ErrorCode result =
+            Finish(AuthorizationSet() /* in_params */, message, signature, &out_params, output);
+
+    if (result != ErrorCode::OK) {
+        return result;
+    }
+
+    EXPECT_EQ(0U, out_params.size());
+    return result;
+}
+
+ErrorCode KeyMintAidlTestBase::Abort(const sp<IKeyMintOperation>& op) {
+    SCOPED_TRACE("Abort");
+
+    EXPECT_NE(op, nullptr);
+    if (!op) {
+        return ErrorCode::UNEXPECTED_NULL_POINTER;
+    }
+
+    Status retval = op->abort();
+    EXPECT_TRUE(retval.isOk());
+    return static_cast<ErrorCode>(retval.serviceSpecificErrorCode());
+}
+
+ErrorCode KeyMintAidlTestBase::Abort() {
+    SCOPED_TRACE("Abort");
+
+    EXPECT_NE(op_, nullptr);
+    if (!op_) {
+        return ErrorCode::UNEXPECTED_NULL_POINTER;
+    }
+
+    Status retval = op_->abort();
+    return static_cast<ErrorCode>(retval.serviceSpecificErrorCode());
+}
+
+void KeyMintAidlTestBase::AbortIfNeeded() {
+    SCOPED_TRACE("AbortIfNeeded");
+    if (op_) {
+        EXPECT_EQ(ErrorCode::OK, Abort());
+        op_.clear();
+    }
+}
+
+string KeyMintAidlTestBase::ProcessMessage(const vector<uint8_t>& key_blob, KeyPurpose operation,
+                                           const string& message, const AuthorizationSet& in_params,
+                                           AuthorizationSet* out_params) {
+    SCOPED_TRACE("ProcessMessage");
+    AuthorizationSet begin_out_params;
+    ErrorCode result = Begin(operation, key_blob, in_params, &begin_out_params);
+    EXPECT_EQ(ErrorCode::OK, result);
+    if (result != ErrorCode::OK) {
+        return "";
+    }
+
+    string output;
+    int32_t consumed = 0;
+    AuthorizationSet update_params;
+    AuthorizationSet update_out_params;
+    result = Update(update_params, message, &update_out_params, &output, &consumed);
+    EXPECT_EQ(ErrorCode::OK, result);
+    if (result != ErrorCode::OK) {
+        return "";
+    }
+
+    string unused;
+    AuthorizationSet finish_params;
+    AuthorizationSet finish_out_params;
+    EXPECT_EQ(ErrorCode::OK,
+              Finish(finish_params, message.substr(consumed), unused, &finish_out_params, &output));
+
+    out_params->push_back(begin_out_params);
+    out_params->push_back(finish_out_params);
+    return output;
+}
+
+string KeyMintAidlTestBase::SignMessage(const vector<uint8_t>& key_blob, const string& message,
+                                        const AuthorizationSet& params) {
+    SCOPED_TRACE("SignMessage");
+    AuthorizationSet out_params;
+    string signature = ProcessMessage(key_blob, KeyPurpose::SIGN, message, params, &out_params);
+    EXPECT_TRUE(out_params.empty());
+    return signature;
+}
+
+string KeyMintAidlTestBase::SignMessage(const string& message, const AuthorizationSet& params) {
+    SCOPED_TRACE("SignMessage");
+    return SignMessage(key_blob_, message, params);
+}
+
+string KeyMintAidlTestBase::MacMessage(const string& message, Digest digest, size_t mac_length) {
+    SCOPED_TRACE("MacMessage");
+    return SignMessage(
+            key_blob_, message,
+            AuthorizationSetBuilder().Digest(digest).Authorization(TAG_MAC_LENGTH, mac_length));
+}
+
+void KeyMintAidlTestBase::CheckHmacTestVector(const string& key, const string& message,
+                                              Digest digest, const string& expected_mac) {
+    SCOPED_TRACE("CheckHmacTestVector");
+    ASSERT_EQ(ErrorCode::OK,
+              ImportKey(AuthorizationSetBuilder()
+                                .Authorization(TAG_NO_AUTH_REQUIRED)
+                                .HmacKey(key.size() * 8)
+                                .Authorization(TAG_MIN_MAC_LENGTH, expected_mac.size() * 8)
+                                .Digest(digest),
+                        KeyFormat::RAW, key));
+    string signature = MacMessage(message, digest, expected_mac.size() * 8);
+    EXPECT_EQ(expected_mac, signature)
+            << "Test vector didn't match for key of size " << key.size() << " message of size "
+            << message.size() << " and digest " << digest;
+    CheckedDeleteKey();
+}
+
+void KeyMintAidlTestBase::CheckAesCtrTestVector(const string& key, const string& nonce,
+                                                const string& message,
+                                                const string& expected_ciphertext) {
+    SCOPED_TRACE("CheckAesCtrTestVector");
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .AesEncryptionKey(key.size() * 8)
+                                               .BlockMode(BlockMode::CTR)
+                                               .Authorization(TAG_CALLER_NONCE)
+                                               .Padding(PaddingMode::NONE),
+                                       KeyFormat::RAW, key));
+
+    auto params = AuthorizationSetBuilder()
+                          .Authorization(TAG_NONCE, nonce.data(), nonce.size())
+                          .BlockMode(BlockMode::CTR)
+                          .Padding(PaddingMode::NONE);
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(key_blob_, message, params, &out_params);
+    EXPECT_EQ(expected_ciphertext, ciphertext);
+}
+
+void KeyMintAidlTestBase::CheckTripleDesTestVector(KeyPurpose purpose, BlockMode block_mode,
+                                                   PaddingMode padding_mode, const string& key,
+                                                   const string& iv, const string& input,
+                                                   const string& expected_output) {
+    auto authset = AuthorizationSetBuilder()
+                           .TripleDesEncryptionKey(key.size() * 7)
+                           .BlockMode(block_mode)
+                           .Authorization(TAG_NO_AUTH_REQUIRED)
+                           .Padding(padding_mode);
+    if (iv.size()) authset.Authorization(TAG_CALLER_NONCE);
+    ASSERT_EQ(ErrorCode::OK, ImportKey(authset, KeyFormat::RAW, key));
+    ASSERT_GT(key_blob_.size(), 0U);
+
+    auto begin_params = AuthorizationSetBuilder().BlockMode(block_mode).Padding(padding_mode);
+    if (iv.size()) begin_params.Authorization(TAG_NONCE, iv.data(), iv.size());
+    AuthorizationSet output_params;
+    string output = ProcessMessage(key_blob_, purpose, input, begin_params, &output_params);
+    EXPECT_EQ(expected_output, output);
+}
+
+void KeyMintAidlTestBase::VerifyMessage(const vector<uint8_t>& key_blob, const string& message,
+                                        const string& signature, const AuthorizationSet& params) {
+    SCOPED_TRACE("VerifyMessage");
+    AuthorizationSet begin_out_params;
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::VERIFY, key_blob, params, &begin_out_params));
+
+    string output;
+    AuthorizationSet update_params;
+    AuthorizationSet update_out_params;
+    int32_t consumed;
+    ASSERT_EQ(ErrorCode::OK,
+              Update(update_params, message, &update_out_params, &output, &consumed));
+    EXPECT_TRUE(output.empty());
+    EXPECT_GT(consumed, 0U);
+
+    string unused;
+    AuthorizationSet finish_params;
+    AuthorizationSet finish_out_params;
+    EXPECT_EQ(ErrorCode::OK, Finish(finish_params, message.substr(consumed), signature,
+                                    &finish_out_params, &output));
+    op_.clear();
+    EXPECT_TRUE(output.empty());
+}
+
+void KeyMintAidlTestBase::VerifyMessage(const string& message, const string& signature,
+                                        const AuthorizationSet& params) {
+    SCOPED_TRACE("VerifyMessage");
+    VerifyMessage(key_blob_, message, signature, params);
+}
+
+string KeyMintAidlTestBase::EncryptMessage(const vector<uint8_t>& key_blob, const string& message,
+                                           const AuthorizationSet& in_params,
+                                           AuthorizationSet* out_params) {
+    SCOPED_TRACE("EncryptMessage");
+    return ProcessMessage(key_blob, KeyPurpose::ENCRYPT, message, in_params, out_params);
+}
+
+string KeyMintAidlTestBase::EncryptMessage(const string& message, const AuthorizationSet& params,
+                                           AuthorizationSet* out_params) {
+    SCOPED_TRACE("EncryptMessage");
+    return EncryptMessage(key_blob_, message, params, out_params);
+}
+
+string KeyMintAidlTestBase::EncryptMessage(const string& message, const AuthorizationSet& params) {
+    SCOPED_TRACE("EncryptMessage");
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(message, params, &out_params);
+    EXPECT_TRUE(out_params.empty()) << "Output params should be empty. Contained: " << out_params;
+    return ciphertext;
+}
+
+string KeyMintAidlTestBase::EncryptMessage(const string& message, BlockMode block_mode,
+                                           PaddingMode padding) {
+    SCOPED_TRACE("EncryptMessage");
+    auto params = AuthorizationSetBuilder().BlockMode(block_mode).Padding(padding);
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(message, params, &out_params);
+    EXPECT_TRUE(out_params.empty()) << "Output params should be empty. Contained: " << out_params;
+    return ciphertext;
+}
+
+string KeyMintAidlTestBase::EncryptMessage(const string& message, BlockMode block_mode,
+                                           PaddingMode padding, vector<uint8_t>* iv_out) {
+    SCOPED_TRACE("EncryptMessage");
+    auto params = AuthorizationSetBuilder().BlockMode(block_mode).Padding(padding);
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(message, params, &out_params);
+    EXPECT_EQ(1U, out_params.size());
+    auto ivVal = out_params.GetTagValue(TAG_NONCE);
+    EXPECT_TRUE(ivVal.isOk());
+    if (ivVal.isOk()) *iv_out = ivVal.value();
+    return ciphertext;
+}
+
+string KeyMintAidlTestBase::EncryptMessage(const string& message, BlockMode block_mode,
+                                           PaddingMode padding, const vector<uint8_t>& iv_in) {
+    SCOPED_TRACE("EncryptMessage");
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(block_mode)
+                          .Padding(padding)
+                          .Authorization(TAG_NONCE, iv_in);
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(message, params, &out_params);
+    return ciphertext;
+}
+
+string KeyMintAidlTestBase::EncryptMessage(const string& message, BlockMode block_mode,
+                                           PaddingMode padding, uint8_t mac_length_bits,
+                                           const vector<uint8_t>& iv_in) {
+    SCOPED_TRACE("EncryptMessage");
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(block_mode)
+                          .Padding(padding)
+                          .Authorization(TAG_MAC_LENGTH, mac_length_bits)
+                          .Authorization(TAG_NONCE, iv_in);
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(message, params, &out_params);
+    return ciphertext;
+}
+
+string KeyMintAidlTestBase::DecryptMessage(const vector<uint8_t>& key_blob,
+                                           const string& ciphertext,
+                                           const AuthorizationSet& params) {
+    SCOPED_TRACE("DecryptMessage");
+    AuthorizationSet out_params;
+    string plaintext =
+            ProcessMessage(key_blob, KeyPurpose::DECRYPT, ciphertext, params, &out_params);
+    EXPECT_TRUE(out_params.empty());
+    return plaintext;
+}
+
+string KeyMintAidlTestBase::DecryptMessage(const string& ciphertext,
+                                           const AuthorizationSet& params) {
+    SCOPED_TRACE("DecryptMessage");
+    return DecryptMessage(key_blob_, ciphertext, params);
+}
+
+string KeyMintAidlTestBase::DecryptMessage(const string& ciphertext, BlockMode block_mode,
+                                           PaddingMode padding_mode, const vector<uint8_t>& iv) {
+    SCOPED_TRACE("DecryptMessage");
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(block_mode)
+                          .Padding(padding_mode)
+                          .Authorization(TAG_NONCE, iv);
+    return DecryptMessage(key_blob_, ciphertext, params);
+}
+
+std::pair<ErrorCode, vector<uint8_t>> KeyMintAidlTestBase::UpgradeKey(
+        const vector<uint8_t>& key_blob) {
+    std::pair<ErrorCode, vector<uint8_t>> retval;
+    vector<uint8_t> outKeyBlob;
+    Status result = keymint_->upgradeKey(key_blob, vector<KeyParameter>(), &outKeyBlob);
+    ErrorCode errorcode = GetReturnErrorCode(result);
+    retval = std::tie(errorcode, outKeyBlob);
+
+    return retval;
+}
+vector<uint32_t> KeyMintAidlTestBase::ValidKeySizes(Algorithm algorithm) {
+    switch (algorithm) {
+        case Algorithm::RSA:
+            switch (SecLevel()) {
+                case SecurityLevel::SOFTWARE:
+                case SecurityLevel::TRUSTED_ENVIRONMENT:
+                    return {2048, 3072, 4096};
+                case SecurityLevel::STRONGBOX:
+                    return {2048};
+                default:
+                    ADD_FAILURE() << "Invalid security level " << uint32_t(SecLevel());
+                    break;
+            }
+            break;
+        case Algorithm::EC:
+            switch (SecLevel()) {
+                case SecurityLevel::SOFTWARE:
+                case SecurityLevel::TRUSTED_ENVIRONMENT:
+                    return {224, 256, 384, 521};
+                case SecurityLevel::STRONGBOX:
+                    return {256};
+                default:
+                    ADD_FAILURE() << "Invalid security level " << uint32_t(SecLevel());
+                    break;
+            }
+            break;
+        case Algorithm::AES:
+            return {128, 256};
+        case Algorithm::TRIPLE_DES:
+            return {168};
+        case Algorithm::HMAC: {
+            vector<uint32_t> retval((512 - 64) / 8 + 1);
+            uint32_t size = 64 - 8;
+            std::generate(retval.begin(), retval.end(), [&]() { return (size += 8); });
+            return retval;
+        }
+        default:
+            ADD_FAILURE() << "Invalid Algorithm: " << algorithm;
+            return {};
+    }
+    ADD_FAILURE() << "Should be impossible to get here";
+    return {};
+}
+
+vector<uint32_t> KeyMintAidlTestBase::InvalidKeySizes(Algorithm algorithm) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        switch (algorithm) {
+            case Algorithm::RSA:
+                return {3072, 4096};
+            case Algorithm::EC:
+                return {224, 384, 521};
+            case Algorithm::AES:
+                return {192};
+            default:
+                return {};
+        }
+    }
+    return {};
+}
+
+vector<EcCurve> KeyMintAidlTestBase::ValidCurves() {
+    if (securityLevel_ == SecurityLevel::STRONGBOX) {
+        return {EcCurve::P_256};
+    } else {
+        return {EcCurve::P_224, EcCurve::P_256, EcCurve::P_384, EcCurve::P_521};
+    }
+}
+
+vector<EcCurve> KeyMintAidlTestBase::InvalidCurves() {
+    if (SecLevel() == SecurityLevel::TRUSTED_ENVIRONMENT) return {};
+    CHECK(SecLevel() == SecurityLevel::STRONGBOX);
+    return {EcCurve::P_224, EcCurve::P_384, EcCurve::P_521};
+}
+
+vector<Digest> KeyMintAidlTestBase::ValidDigests(bool withNone, bool withMD5) {
+    switch (SecLevel()) {
+        case SecurityLevel::SOFTWARE:
+        case SecurityLevel::TRUSTED_ENVIRONMENT:
+            if (withNone) {
+                if (withMD5)
+                    return {Digest::NONE,      Digest::MD5,       Digest::SHA1,
+                            Digest::SHA_2_224, Digest::SHA_2_256, Digest::SHA_2_384,
+                            Digest::SHA_2_512};
+                else
+                    return {Digest::NONE,      Digest::SHA1,      Digest::SHA_2_224,
+                            Digest::SHA_2_256, Digest::SHA_2_384, Digest::SHA_2_512};
+            } else {
+                if (withMD5)
+                    return {Digest::MD5,       Digest::SHA1,      Digest::SHA_2_224,
+                            Digest::SHA_2_256, Digest::SHA_2_384, Digest::SHA_2_512};
+                else
+                    return {Digest::SHA1, Digest::SHA_2_224, Digest::SHA_2_256, Digest::SHA_2_384,
+                            Digest::SHA_2_512};
+            }
+            break;
+        case SecurityLevel::STRONGBOX:
+            if (withNone)
+                return {Digest::NONE, Digest::SHA_2_256};
+            else
+                return {Digest::SHA_2_256};
+            break;
+        default:
+            ADD_FAILURE() << "Invalid security level " << uint32_t(SecLevel());
+            break;
+    }
+    ADD_FAILURE() << "Should be impossible to get here";
+    return {};
+}
+
+}  // namespace test
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
diff --git a/keymint/aidl/vts/functional/KeyMintAidlTestBase.h b/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
new file mode 100644
index 0000000..2948c41
--- /dev/null
+++ b/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef VTS_KEYMINT_AIDL_TEST_UTILS_H
+#define VTS_KEYMINT_AIDL_TEST_UTILS_H
+
+#pragma once
+
+#include <aidl/Gtest.h>
+#include <aidl/Vintf.h>
+#include <android/hardware/keymint/ErrorCode.h>
+#include <android/hardware/keymint/IKeyMintDevice.h>
+#include <binder/IServiceManager.h>
+#include <binder/ProcessState.h>
+#include <gtest/gtest.h>
+
+#include <keymintSupport/authorization_set.h>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+namespace test {
+
+using ::android::sp;
+using binder::Status;
+using ::std::shared_ptr;
+using ::std::string;
+using ::std::vector;
+
+constexpr uint64_t kOpHandleSentinel = 0xFFFFFFFFFFFFFFFF;
+
+::std::ostream& operator<<(::std::ostream& os, const AuthorizationSet& set);
+
+class KeyMintAidlTestBase : public ::testing::TestWithParam<string> {
+  public:
+    void SetUp() override;
+    void TearDown() override {
+        if (key_blob_.size()) {
+            CheckedDeleteKey();
+        }
+        AbortIfNeeded();
+    }
+
+    void InitializeKeyMint(sp<IKeyMintDevice> keyMint);
+    IKeyMintDevice& keyMint() { return *keymint_; }
+    uint32_t os_version() { return os_version_; }
+    uint32_t os_patch_level() { return os_patch_level_; }
+
+    ErrorCode GetReturnErrorCode(Status result);
+    ErrorCode GenerateKey(const AuthorizationSet& key_desc, vector<uint8_t>* key_blob,
+                          KeyCharacteristics* key_characteristics);
+
+    ErrorCode GenerateKey(const AuthorizationSet& key_desc);
+
+    ErrorCode ImportKey(const AuthorizationSet& key_desc, KeyFormat format,
+                        const string& key_material, vector<uint8_t>* key_blob,
+                        KeyCharacteristics* key_characteristics);
+    ErrorCode ImportKey(const AuthorizationSet& key_desc, KeyFormat format,
+                        const string& key_material);
+
+    ErrorCode ImportWrappedKey(string wrapped_key, string wrapping_key,
+                               const AuthorizationSet& wrapping_key_desc, string masking_key,
+                               const AuthorizationSet& unwrapping_params);
+
+    ErrorCode DeleteKey(vector<uint8_t>* key_blob, bool keep_key_blob = false);
+    ErrorCode DeleteKey(bool keep_key_blob = false);
+
+    ErrorCode DeleteAllKeys();
+
+    void CheckedDeleteKey(vector<uint8_t>* key_blob, bool keep_key_blob = false);
+    void CheckedDeleteKey();
+
+    ErrorCode Begin(KeyPurpose purpose, const vector<uint8_t>& key_blob,
+                    const AuthorizationSet& in_params, AuthorizationSet* out_params,
+                    sp<IKeyMintOperation>& op);
+    ErrorCode Begin(KeyPurpose purpose, const vector<uint8_t>& key_blob,
+                    const AuthorizationSet& in_params, AuthorizationSet* out_params);
+    ErrorCode Begin(KeyPurpose purpose, const AuthorizationSet& in_params,
+                    AuthorizationSet* out_params);
+    ErrorCode Begin(KeyPurpose purpose, const AuthorizationSet& in_params);
+
+    ErrorCode Update(const AuthorizationSet& in_params, const string& input,
+                     AuthorizationSet* out_params, string* output, int32_t* input_consumed);
+    ErrorCode Update(const string& input, string* out, int32_t* input_consumed);
+
+    ErrorCode Finish(const AuthorizationSet& in_params, const string& input,
+                     const string& signature, AuthorizationSet* out_params, string* output);
+    ErrorCode Finish(const string& message, string* output);
+    ErrorCode Finish(const string& message, const string& signature, string* output);
+    ErrorCode Finish(string* output) { return Finish(string(), output); }
+
+    ErrorCode Abort();
+    ErrorCode Abort(const sp<IKeyMintOperation>& op);
+    void AbortIfNeeded();
+
+    string ProcessMessage(const vector<uint8_t>& key_blob, KeyPurpose operation,
+                          const string& message, const AuthorizationSet& in_params,
+                          AuthorizationSet* out_params);
+
+    string SignMessage(const vector<uint8_t>& key_blob, const string& message,
+                       const AuthorizationSet& params);
+    string SignMessage(const string& message, const AuthorizationSet& params);
+
+    string MacMessage(const string& message, Digest digest, size_t mac_length);
+
+    void CheckHmacTestVector(const string& key, const string& message, Digest digest,
+                             const string& expected_mac);
+
+    void CheckAesCtrTestVector(const string& key, const string& nonce, const string& message,
+                               const string& expected_ciphertext);
+
+    void CheckTripleDesTestVector(KeyPurpose purpose, BlockMode block_mode,
+                                  PaddingMode padding_mode, const string& key, const string& iv,
+                                  const string& input, const string& expected_output);
+
+    void VerifyMessage(const vector<uint8_t>& key_blob, const string& message,
+                       const string& signature, const AuthorizationSet& params);
+    void VerifyMessage(const string& message, const string& signature,
+                       const AuthorizationSet& params);
+
+    string EncryptMessage(const vector<uint8_t>& key_blob, const string& message,
+                          const AuthorizationSet& in_params, AuthorizationSet* out_params);
+    string EncryptMessage(const string& message, const AuthorizationSet& params,
+                          AuthorizationSet* out_params);
+    string EncryptMessage(const string& message, const AuthorizationSet& params);
+    string EncryptMessage(const string& message, BlockMode block_mode, PaddingMode padding);
+    string EncryptMessage(const string& message, BlockMode block_mode, PaddingMode padding,
+                          vector<uint8_t>* iv_out);
+    string EncryptMessage(const string& message, BlockMode block_mode, PaddingMode padding,
+                          const vector<uint8_t>& iv_in);
+    string EncryptMessage(const string& message, BlockMode block_mode, PaddingMode padding,
+                          uint8_t mac_length_bits, const vector<uint8_t>& iv_in);
+
+    string DecryptMessage(const vector<uint8_t>& key_blob, const string& ciphertext,
+                          const AuthorizationSet& params);
+    string DecryptMessage(const string& ciphertext, const AuthorizationSet& params);
+    string DecryptMessage(const string& ciphertext, BlockMode block_mode, PaddingMode padding_mode,
+                          const vector<uint8_t>& iv);
+
+    std::pair<ErrorCode, vector<uint8_t>> UpgradeKey(const vector<uint8_t>& key_blob);
+
+    bool IsSecure() { return securityLevel_ != SecurityLevel::SOFTWARE; }
+    SecurityLevel SecLevel() { return securityLevel_; }
+
+    vector<uint32_t> ValidKeySizes(Algorithm algorithm);
+    vector<uint32_t> InvalidKeySizes(Algorithm algorithm);
+
+    vector<EcCurve> ValidCurves();
+    vector<EcCurve> InvalidCurves();
+
+    vector<Digest> ValidDigests(bool withNone, bool withMD5);
+
+    static vector<string> build_params() {
+        auto params = android::getAidlHalInstanceNames(IKeyMintDevice::descriptor);
+        return params;
+    }
+
+    sp<IKeyMintOperation> op_;
+    vector<Certificate> certChain_;
+    vector<uint8_t> key_blob_;
+    KeyCharacteristics key_characteristics_;
+
+  private:
+    sp<IKeyMintDevice> keymint_;
+    uint32_t os_version_;
+    uint32_t os_patch_level_;
+
+    SecurityLevel securityLevel_;
+    string name_;
+    string author_;
+    long challenge_;
+};
+
+#define INSTANTIATE_KEYMINT_AIDL_TEST(name)                                          \
+    INSTANTIATE_TEST_SUITE_P(PerInstance, name,                                      \
+                             testing::ValuesIn(KeyMintAidlTestBase::build_params()), \
+                             android::PrintInstanceNameToString)
+
+}  // namespace test
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
+
+#endif  // VTS_KEYMINT_AIDL_TEST_UTILS_H
diff --git a/keymint/aidl/vts/functional/VerificationTokenTest.cpp b/keymint/aidl/vts/functional/VerificationTokenTest.cpp
new file mode 100644
index 0000000..bd0942b
--- /dev/null
+++ b/keymint/aidl/vts/functional/VerificationTokenTest.cpp
@@ -0,0 +1,174 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "KeyMintAidlTestBase.h"
+
+namespace android {
+namespace hardware {
+namespace keymint {
+namespace test {
+
+class VerificationTokenTest : public KeyMintAidlTestBase {
+  protected:
+    struct VerifyAuthorizationResult {
+        ErrorCode error;
+        VerificationToken token;
+    };
+
+    VerifyAuthorizationResult verifyAuthorization(uint64_t operationHandle,
+                                                  const HardwareAuthToken& authToken) {
+        VerifyAuthorizationResult result;
+
+        Status err;
+        err = keyMint().verifyAuthorization(operationHandle,  //
+                                            authToken,        //
+                                            &result.token);
+
+        result.error = GetReturnErrorCode(err);
+        return result;
+    }
+
+    uint64_t getTime() {
+        struct timespec timespec;
+        EXPECT_EQ(0, clock_gettime(CLOCK_BOOTTIME, &timespec));
+        return timespec.tv_sec * 1000 + timespec.tv_nsec / 1000000;
+    }
+
+    int sleep_ms(uint32_t milliseconds) {
+        struct timespec sleep_time = {static_cast<time_t>(milliseconds / 1000),
+                                      static_cast<long>(milliseconds % 1000) * 1000000};
+        while (sleep_time.tv_sec || sleep_time.tv_nsec) {
+            if (nanosleep(&sleep_time /* to wait */,
+                          &sleep_time /* remaining (on interrruption) */) == 0) {
+                sleep_time = {};
+            } else {
+                if (errno != EINTR) return errno;
+            }
+        }
+        return 0;
+    }
+};
+
+/*
+ * VerificationTokens exist to facilitate cross-KeyMint verification of requirements.  As
+ * such, the precise capabilities required will vary depending on the specific vendor
+ * implementations. Essentially, VerificationTokens are a "hook" to enable vendor
+ * implementations to communicate, so the precise usage is defined by those vendors.  The only
+ * thing we really can test is that tokens can be created by TEE keyMints, and that the
+ * timestamps increase as expected.
+ */
+TEST_P(VerificationTokenTest, TestCreation) {
+    auto result1 = verifyAuthorization(1 /* operation handle */, HardwareAuthToken());
+    auto result1_time = getTime();
+
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        // StrongBox should not implement verifyAuthorization.
+        EXPECT_EQ(ErrorCode::UNIMPLEMENTED, result1.error);
+        return;
+    }
+
+    ASSERT_EQ(ErrorCode::OK, result1.error);
+    EXPECT_EQ(1U, result1.token.challenge);
+    EXPECT_EQ(SecLevel(), result1.token.securityLevel);
+    EXPECT_GT(result1.token.timestamp.milliSeconds, 0U);
+
+    constexpr uint32_t time_to_sleep = 200;
+    sleep_ms(time_to_sleep);
+
+    auto result2 = verifyAuthorization(2 /* operation handle */, HardwareAuthToken());
+
+    auto result2_time = getTime();
+    ASSERT_EQ(ErrorCode::OK, result2.error);
+    EXPECT_EQ(2U, result2.token.challenge);
+    EXPECT_EQ(SecLevel(), result2.token.securityLevel);
+
+    auto host_time_delta = result2_time - result1_time;
+
+    EXPECT_GE(host_time_delta, time_to_sleep)
+            << "We slept for " << time_to_sleep << " ms, the clock must have advanced by that much";
+    EXPECT_LE(host_time_delta, time_to_sleep + 20)
+            << "The verifyAuthorization call took " << (host_time_delta - time_to_sleep)
+            << " ms?  That's awful!";
+
+    auto km_time_delta =
+            result2.token.timestamp.milliSeconds - result1.token.timestamp.milliSeconds;
+
+    // If not too much else is going on on the system, the time delta should be quite close.  Allow
+    // 2 ms of slop just to avoid test flakiness.
+    //
+    // TODO(swillden): see if we can output values so they can be gathered across many runs and
+    // report if times aren't nearly always <1ms apart.
+    EXPECT_LE(host_time_delta, km_time_delta + 2);
+    EXPECT_LE(km_time_delta, host_time_delta + 2);
+    ASSERT_EQ(result1.token.mac.size(), result2.token.mac.size());
+    ASSERT_NE(0,
+              memcmp(result1.token.mac.data(), result2.token.mac.data(), result1.token.mac.size()));
+}
+
+/*
+ * Test that the mac changes when the time stamp changes. This is does not guarantee that the time
+ * stamp is included in the mac but on failure we know that it is not. Other than in the test
+ * case above we call verifyAuthorization with the exact same set of parameters.
+ */
+TEST_P(VerificationTokenTest, MacChangesOnChangingTimestamp) {
+    auto result1 = verifyAuthorization(0 /* operation handle */, HardwareAuthToken());
+    auto result1_time = getTime();
+
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        // StrongBox should not implement verifyAuthorization.
+        EXPECT_EQ(ErrorCode::UNIMPLEMENTED, result1.error);
+        return;
+    }
+
+    EXPECT_EQ(ErrorCode::OK, result1.error);
+    EXPECT_EQ(0U, result1.token.challenge);
+    EXPECT_EQ(SecLevel(), result1.token.securityLevel);
+    EXPECT_GT(result1.token.timestamp.milliSeconds, 0U);
+
+    constexpr uint32_t time_to_sleep = 200;
+    sleep_ms(time_to_sleep);
+
+    auto result2 = verifyAuthorization(0 /* operation handle */, HardwareAuthToken());
+    // ASSERT_TRUE(result2.callSuccessful);
+    auto result2_time = getTime();
+    EXPECT_EQ(ErrorCode::OK, result2.error);
+    EXPECT_EQ(0U, result2.token.challenge);
+    EXPECT_EQ(SecLevel(), result2.token.securityLevel);
+
+    auto host_time_delta = result2_time - result1_time;
+
+    EXPECT_GE(host_time_delta, time_to_sleep)
+            << "We slept for " << time_to_sleep << " ms, the clock must have advanced by that much";
+    EXPECT_LE(host_time_delta, time_to_sleep + 20)
+            << "The verifyAuthorization call took " << (host_time_delta - time_to_sleep)
+            << " ms?  That's awful!";
+
+    auto km_time_delta =
+            result2.token.timestamp.milliSeconds - result1.token.timestamp.milliSeconds;
+
+    EXPECT_LE(host_time_delta, km_time_delta + 2);
+    EXPECT_LE(km_time_delta, host_time_delta + 2);
+    ASSERT_EQ(result1.token.mac.size(), result2.token.mac.size());
+    ASSERT_NE(0,
+              memcmp(result1.token.mac.data(), result2.token.mac.data(), result1.token.mac.size()));
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(VerificationTokenTest);
+
+}  // namespace test
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
diff --git a/keymint/aidl/vts/functional/keyMint1Test.cpp b/keymint/aidl/vts/functional/keyMint1Test.cpp
new file mode 100644
index 0000000..c2fa2f8
--- /dev/null
+++ b/keymint/aidl/vts/functional/keyMint1Test.cpp
@@ -0,0 +1,4069 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "keymint_5_test"
+#include <cutils/log.h>
+
+#include <signal.h>
+#include <iostream>
+
+#include <openssl/evp.h>
+#include <openssl/mem.h>
+#include <openssl/x509.h>
+
+#include <cutils/properties.h>
+
+#include <android/hardware/keymint/KeyFormat.h>
+
+#include <keymintSupport/attestation_record.h>
+#include <keymintSupport/key_param_output.h>
+#include <keymintSupport/openssl_utils.h>
+
+#include "KeyMintAidlTestBase.h"
+
+static bool arm_deleteAllKeys = false;
+static bool dump_Attestations = false;
+
+using android::hardware::keymint::AuthorizationSet;
+using android::hardware::keymint::KeyCharacteristics;
+using android::hardware::keymint::KeyFormat;
+
+namespace android {
+namespace hardware {
+
+namespace keymint {
+
+bool operator==(const keymint::AuthorizationSet& a, const keymint::AuthorizationSet& b) {
+    return a.size() == b.size() && std::equal(a.begin(), a.end(), b.begin());
+}
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
+
+namespace std {
+
+using namespace android::hardware::keymint;
+
+template <>
+struct std::equal_to<KeyCharacteristics> {
+    bool operator()(const KeyCharacteristics& a, const KeyCharacteristics& b) const {
+        // This isn't very efficient. Oh, well.
+        AuthorizationSet a_sw(a.softwareEnforced);
+        AuthorizationSet b_sw(b.softwareEnforced);
+        AuthorizationSet a_tee(b.hardwareEnforced);
+        AuthorizationSet b_tee(b.hardwareEnforced);
+
+        a_sw.Sort();
+        b_sw.Sort();
+        a_tee.Sort();
+        b_tee.Sort();
+
+        return ((a_sw == b_sw) && (a_tee == b_tee));
+    }
+};
+
+}  // namespace std
+
+namespace android {
+namespace hardware {
+namespace keymint {
+namespace test {
+namespace {
+
+template <TagType tag_type, Tag tag, typename ValueT>
+bool contains(vector<KeyParameter>& set, TypedTag<tag_type, tag> ttag, ValueT expected_value) {
+    auto it = std::find_if(set.begin(), set.end(), [&](const KeyParameter& param) {
+        return param.tag == tag && accessTagValue(ttag, param) == expected_value;
+    });
+    return (it != set.end());
+}
+
+template <TagType tag_type, Tag tag>
+bool contains(vector<KeyParameter>& set, TypedTag<tag_type, tag>) {
+    auto it = std::find_if(set.begin(), set.end(),
+                           [&](const KeyParameter& param) { return param.tag == tag; });
+    return (it != set.end());
+}
+
+constexpr char hex_value[256] = {0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 1,  2,  3,  4,  5,  6,  7, 8, 9, 0, 0, 0, 0, 0, 0,  // '0'..'9'
+                                 0, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0,  // 'A'..'F'
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0,  // 'a'..'f'
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0,  //
+                                 0, 0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+string hex2str(string a) {
+    string b;
+    size_t num = a.size() / 2;
+    b.resize(num);
+    for (size_t i = 0; i < num; i++) {
+        b[i] = (hex_value[a[i * 2] & 0xFF] << 4) + (hex_value[a[i * 2 + 1] & 0xFF]);
+    }
+    return b;
+}
+
+string rsa_key =
+        hex2str("30820275020100300d06092a864886f70d01010105000482025f3082025b"
+                "02010002818100c6095409047d8634812d5a218176e45c41d60a75b13901"
+                "f234226cffe776521c5a77b9e389417b71c0b6a44d13afe4e4a2805d46c9"
+                "da2935adb1ff0c1f24ea06e62b20d776430a4d435157233c6f916783c30e"
+                "310fcbd89b85c2d56771169785ac12bca244abda72bfb19fc44d27c81e1d"
+                "92de284f4061edfd99280745ea6d2502030100010281801be0f04d9cae37"
+                "18691f035338308e91564b55899ffb5084d2460e6630257e05b3ceab0297"
+                "2dfabcd6ce5f6ee2589eb67911ed0fac16e43a444b8c861e544a05933657"
+                "72f8baf6b22fc9e3c5f1024b063ac080a7b2234cf8aee8f6c47bbf4fd3ac"
+                "e7240290bef16c0b3f7f3cdd64ce3ab5912cf6e32f39ab188358afcccd80"
+                "81024100e4b49ef50f765d3b24dde01aceaaf130f2c76670a91a61ae08af"
+                "497b4a82be6dee8fcdd5e3f7ba1cfb1f0c926b88f88c92bfab137fba2285"
+                "227b83c342ff7c55024100ddabb5839c4c7f6bf3d4183231f005b31aa58a"
+                "ffdda5c79e4cce217f6bc930dbe563d480706c24e9ebfcab28a6cdefd324"
+                "b77e1bf7251b709092c24ff501fd91024023d4340eda3445d8cd26c14411"
+                "da6fdca63c1ccd4b80a98ad52b78cc8ad8beb2842c1d280405bc2f6c1bea"
+                "214a1d742ab996b35b63a82a5e470fa88dbf823cdd02401b7b57449ad30d"
+                "1518249a5f56bb98294d4b6ac12ffc86940497a5a5837a6cf946262b4945"
+                "26d328c11e1126380fde04c24f916dec250892db09a6d77cdba351024077"
+                "62cd8f4d050da56bd591adb515d24d7ccd32cca0d05f866d583514bd7324"
+                "d5f33645e8ed8b4a1cb3cc4a1d67987399f2a09f5b3fb68c88d5e5d90ac3"
+                "3492d6");
+
+string ec_256_key =
+        hex2str("308187020100301306072a8648ce3d020106082a8648ce3d030107046d30"
+                "6b0201010420737c2ecd7b8d1940bf2930aa9b4ed3ff941eed09366bc032"
+                "99986481f3a4d859a14403420004bf85d7720d07c25461683bc648b4778a"
+                "9a14dd8a024e3bdd8c7ddd9ab2b528bbc7aa1b51f14ebbbb0bd0ce21bcc4"
+                "1c6eb00083cf3376d11fd44949e0b2183bfe");
+
+string ec_521_key =
+        hex2str("3081EE020100301006072A8648CE3D020106052B810400230481D63081D3"
+                "02010104420011458C586DB5DAA92AFAB03F4FE46AA9D9C3CE9A9B7A006A"
+                "8384BEC4C78E8E9D18D7D08B5BCFA0E53C75B064AD51C449BAE0258D54B9"
+                "4B1E885DED08ED4FB25CE9A1818903818600040149EC11C6DF0FA122C6A9"
+                "AFD9754A4FA9513A627CA329E349535A5629875A8ADFBE27DCB932C05198"
+                "6377108D054C28C6F39B6F2C9AF81802F9F326B842FF2E5F3C00AB7635CF"
+                "B36157FC0882D574A10D839C1A0C049DC5E0D775E2EE50671A208431BB45"
+                "E78E70BEFE930DB34818EE4D5C26259F5C6B8E28A652950F9F88D7B4B2C9"
+                "D9");
+
+string ec_256_key_rfc5915 =
+        hex2str("308193020100301306072a8648ce3d020106082a8648ce3d030107047930"
+                "770201010420782370a8c8ce5537baadd04dcff079c8158cfa9c67b818b3"
+                "8e8d21c9fa750c1da00a06082a8648ce3d030107a14403420004e2cc561e"
+                "e701da0ad0ef0d176bb0c919d42e79c393fdc1bd6c4010d85cf2cf8e68c9"
+                "05464666f98dad4f01573ba81078b3428570a439ba3229fbc026c550682f");
+
+string ec_256_key_sec1 =
+        hex2str("308187020100301306072a8648ce3d020106082a8648ce3d030107046d30"
+                "6b0201010420782370a8c8ce5537baadd04dcff079c8158cfa9c67b818b3"
+                "8e8d21c9fa750c1da14403420004e2cc561ee701da0ad0ef0d176bb0c919"
+                "d42e79c393fdc1bd6c4010d85cf2cf8e68c905464666f98dad4f01573ba8"
+                "1078b3428570a439ba3229fbc026c550682f");
+
+struct RSA_Delete {
+    void operator()(RSA* p) { RSA_free(p); }
+};
+
+/* TODO(seleneh) add attestation verification codes like verify_chain() and
+ * attestation tests after we decided on the keymint 1 attestation changes.
+ */
+
+std::string make_string(const uint8_t* data, size_t length) {
+    return std::string(reinterpret_cast<const char*>(data), length);
+}
+
+template <size_t N>
+std::string make_string(const uint8_t (&a)[N]) {
+    return make_string(a, N);
+}
+
+class AidlBuf : public vector<uint8_t> {
+    typedef vector<uint8_t> super;
+
+  public:
+    AidlBuf() {}
+    AidlBuf(const super& other) : super(other) {}
+    AidlBuf(super&& other) : super(std::move(other)) {}
+    explicit AidlBuf(const std::string& other) : AidlBuf() { *this = other; }
+
+    AidlBuf& operator=(const super& other) {
+        super::operator=(other);
+        return *this;
+    }
+
+    AidlBuf& operator=(super&& other) {
+        super::operator=(std::move(other));
+        return *this;
+    }
+
+    AidlBuf& operator=(const string& other) {
+        resize(other.size());
+        for (size_t i = 0; i < other.size(); ++i) {
+            (*this)[i] = static_cast<uint8_t>(other[i]);
+        }
+        return *this;
+    }
+
+    string to_string() const { return string(reinterpret_cast<const char*>(data()), size()); }
+};
+
+}  // namespace
+
+class NewKeyGenerationTest : public KeyMintAidlTestBase {
+  protected:
+    void CheckBaseParams(const KeyCharacteristics& keyCharacteristics) {
+        // TODO(swillden): Distinguish which params should be in which auth list.
+
+        AuthorizationSet auths(keyCharacteristics.hardwareEnforced);
+        auths.push_back(AuthorizationSet(keyCharacteristics.softwareEnforced));
+
+        EXPECT_TRUE(auths.Contains(TAG_ORIGIN, KeyOrigin::GENERATED));
+        EXPECT_TRUE(auths.Contains(TAG_PURPOSE, KeyPurpose::SIGN));
+        EXPECT_TRUE(auths.Contains(TAG_PURPOSE, KeyPurpose::VERIFY));
+
+        // Verify that App ID, App data and ROT are NOT included.
+        EXPECT_FALSE(auths.Contains(TAG_ROOT_OF_TRUST));
+        EXPECT_FALSE(auths.Contains(TAG_APPLICATION_ID));
+        EXPECT_FALSE(auths.Contains(TAG_APPLICATION_DATA));
+
+        // Check that some unexpected tags/values are NOT present.
+        EXPECT_FALSE(auths.Contains(TAG_PURPOSE, KeyPurpose::ENCRYPT));
+        EXPECT_FALSE(auths.Contains(TAG_PURPOSE, KeyPurpose::DECRYPT));
+        EXPECT_FALSE(auths.Contains(TAG_AUTH_TIMEOUT, 301U));
+
+        // Now check that unspecified, defaulted tags are correct.
+        EXPECT_TRUE(auths.Contains(TAG_CREATION_DATETIME));
+
+        EXPECT_TRUE(auths.Contains(TAG_OS_VERSION, os_version()))
+                << "OS version is " << os_version() << " key reported "
+                << auths.GetTagValue(TAG_OS_VERSION);
+        EXPECT_TRUE(auths.Contains(TAG_OS_PATCHLEVEL, os_patch_level()))
+                << "OS patch level is " << os_patch_level() << " key reported "
+                << auths.GetTagValue(TAG_OS_PATCHLEVEL);
+    }
+};
+
+/*
+ * NewKeyGenerationTest.Rsa
+ *
+ * Verifies that keymint can generate all required RSA key sizes, and that the resulting keys
+ * have correct characteristics.
+ */
+TEST_P(NewKeyGenerationTest, Rsa) {
+    for (auto key_size : ValidKeySizes(Algorithm::RSA)) {
+        vector<uint8_t> key_blob;
+        KeyCharacteristics key_characteristics;
+        ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                     .RsaSigningKey(key_size, 65537)
+                                                     .Digest(Digest::NONE)
+                                                     .Padding(PaddingMode::NONE),
+                                             &key_blob, &key_characteristics));
+
+        ASSERT_GT(key_blob.size(), 0U);
+        CheckBaseParams(key_characteristics);
+
+        AuthorizationSet crypto_params;
+        if (IsSecure()) {
+            crypto_params = key_characteristics.hardwareEnforced;
+        } else {
+            crypto_params = key_characteristics.softwareEnforced;
+        }
+
+        EXPECT_TRUE(crypto_params.Contains(TAG_ALGORITHM, Algorithm::RSA));
+        EXPECT_TRUE(crypto_params.Contains(TAG_KEY_SIZE, key_size))
+                << "Key size " << key_size << "missing";
+        EXPECT_TRUE(crypto_params.Contains(TAG_RSA_PUBLIC_EXPONENT, 65537U));
+
+        CheckedDeleteKey(&key_blob);
+    }
+}
+
+/*
+ * NewKeyGenerationTest.NoInvalidRsaSizes
+ *
+ * Verifies that keymint cannot generate any RSA key sizes that are designated as invalid.
+ */
+TEST_P(NewKeyGenerationTest, NoInvalidRsaSizes) {
+    for (auto key_size : InvalidKeySizes(Algorithm::RSA)) {
+        vector<uint8_t> key_blob;
+        KeyCharacteristics key_characteristics;
+        ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
+                  GenerateKey(AuthorizationSetBuilder()
+                                      .RsaSigningKey(key_size, 65537)
+                                      .Digest(Digest::NONE)
+                                      .Padding(PaddingMode::NONE),
+                              &key_blob, &key_characteristics));
+    }
+}
+
+/*
+ * NewKeyGenerationTest.RsaNoDefaultSize
+ *
+ * Verifies that failing to specify a key size for RSA key generation returns
+ * UNSUPPORTED_KEY_SIZE.
+ */
+TEST_P(NewKeyGenerationTest, RsaNoDefaultSize) {
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
+              GenerateKey(AuthorizationSetBuilder()
+                                  .Authorization(TAG_ALGORITHM, Algorithm::RSA)
+                                  .Authorization(TAG_RSA_PUBLIC_EXPONENT, 3U)
+                                  .SigningKey()));
+}
+
+/*
+ * NewKeyGenerationTest.Ecdsa
+ *
+ * Verifies that keymint can generate all required EC key sizes, and that the resulting keys
+ * have correct characteristics.
+ */
+TEST_P(NewKeyGenerationTest, Ecdsa) {
+    for (auto key_size : ValidKeySizes(Algorithm::EC)) {
+        vector<uint8_t> key_blob;
+        KeyCharacteristics key_characteristics;
+        ASSERT_EQ(ErrorCode::OK,
+                  GenerateKey(
+                          AuthorizationSetBuilder().EcdsaSigningKey(key_size).Digest(Digest::NONE),
+                          &key_blob, &key_characteristics));
+        ASSERT_GT(key_blob.size(), 0U);
+        CheckBaseParams(key_characteristics);
+
+        AuthorizationSet crypto_params;
+        if (IsSecure()) {
+            crypto_params = key_characteristics.hardwareEnforced;
+        } else {
+            crypto_params = key_characteristics.softwareEnforced;
+        }
+
+        EXPECT_TRUE(crypto_params.Contains(TAG_ALGORITHM, Algorithm::EC));
+        EXPECT_TRUE(crypto_params.Contains(TAG_KEY_SIZE, key_size))
+                << "Key size " << key_size << "missing";
+
+        CheckedDeleteKey(&key_blob);
+    }
+}
+
+/*
+ * NewKeyGenerationTest.EcdsaDefaultSize
+ *
+ * Verifies that failing to specify a key size for EC key generation returns
+ * UNSUPPORTED_KEY_SIZE.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaDefaultSize) {
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
+              GenerateKey(AuthorizationSetBuilder()
+                                  .Authorization(TAG_ALGORITHM, Algorithm::EC)
+                                  .SigningKey()
+                                  .Digest(Digest::NONE)));
+}
+
+/*
+ * NewKeyGenerationTest.EcdsaInvalidSize
+ *
+ * Verifies that specifying an invalid key size for EC key generation returns
+ * UNSUPPORTED_KEY_SIZE.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaInvalidSize) {
+    for (auto key_size : InvalidKeySizes(Algorithm::EC)) {
+        vector<uint8_t> key_blob;
+        KeyCharacteristics key_characteristics;
+        ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
+                  GenerateKey(
+                          AuthorizationSetBuilder().EcdsaSigningKey(key_size).Digest(Digest::NONE),
+                          &key_blob, &key_characteristics));
+    }
+
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
+              GenerateKey(AuthorizationSetBuilder().EcdsaSigningKey(190).Digest(Digest::NONE)));
+}
+
+/*
+ * NewKeyGenerationTest.EcdsaMismatchKeySize
+ *
+ * Verifies that specifying mismatched key size and curve for EC key generation returns
+ * INVALID_ARGUMENT.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaMismatchKeySize) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+
+    ASSERT_EQ(ErrorCode::INVALID_ARGUMENT,
+              GenerateKey(AuthorizationSetBuilder()
+                                  .EcdsaSigningKey(224)
+                                  .Authorization(TAG_EC_CURVE, EcCurve::P_256)
+                                  .Digest(Digest::NONE)));
+}
+
+/*
+ * NewKeyGenerationTest.EcdsaAllValidSizes
+ *
+ * Verifies that keymint supports all required EC key sizes.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaAllValidSizes) {
+    auto valid_sizes = ValidKeySizes(Algorithm::EC);
+    for (size_t size : valid_sizes) {
+        EXPECT_EQ(ErrorCode::OK,
+                  GenerateKey(AuthorizationSetBuilder().EcdsaSigningKey(size).Digest(Digest::NONE)))
+                << "Failed to generate size: " << size;
+        CheckedDeleteKey();
+    }
+}
+
+/*
+ * NewKeyGenerationTest.EcdsaInvalidCurves
+ *
+ * Verifies that keymint does not support any curve designated as unsupported.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaAllValidCurves) {
+    Digest digest;
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        digest = Digest::SHA_2_256;
+    } else {
+        digest = Digest::SHA_2_512;
+    }
+    for (auto curve : ValidCurves()) {
+        EXPECT_EQ(ErrorCode::OK,
+                  GenerateKey(AuthorizationSetBuilder().EcdsaSigningKey(curve).Digest(digest)))
+                << "Failed to generate key on curve: " << curve;
+        CheckedDeleteKey();
+    }
+}
+
+/*
+ * NewKeyGenerationTest.Hmac
+ *
+ * Verifies that keymint supports all required digests, and that the resulting keys have correct
+ * characteristics.
+ */
+TEST_P(NewKeyGenerationTest, Hmac) {
+    for (auto digest : ValidDigests(false /* withNone */, true /* withMD5 */)) {
+        vector<uint8_t> key_blob;
+        KeyCharacteristics key_characteristics;
+        constexpr size_t key_size = 128;
+        ASSERT_EQ(ErrorCode::OK,
+                  GenerateKey(
+                          AuthorizationSetBuilder().HmacKey(key_size).Digest(digest).Authorization(
+                                  TAG_MIN_MAC_LENGTH, 128),
+                          &key_blob, &key_characteristics));
+
+        ASSERT_GT(key_blob.size(), 0U);
+        CheckBaseParams(key_characteristics);
+
+        AuthorizationSet hardwareEnforced = key_characteristics.hardwareEnforced;
+        AuthorizationSet softwareEnforced = key_characteristics.softwareEnforced;
+        if (IsSecure()) {
+            EXPECT_TRUE(hardwareEnforced.Contains(TAG_ALGORITHM, Algorithm::HMAC));
+            EXPECT_TRUE(hardwareEnforced.Contains(TAG_KEY_SIZE, key_size))
+                    << "Key size " << key_size << "missing";
+        } else {
+            EXPECT_TRUE(softwareEnforced.Contains(TAG_ALGORITHM, Algorithm::HMAC));
+            EXPECT_TRUE(softwareEnforced.Contains(TAG_KEY_SIZE, key_size))
+                    << "Key size " << key_size << "missing";
+        }
+
+        CheckedDeleteKey(&key_blob);
+    }
+}
+
+/*
+ * NewKeyGenerationTest.HmacCheckKeySizes
+ *
+ * Verifies that keymint supports all key sizes, and rejects all invalid key sizes.
+ */
+TEST_P(NewKeyGenerationTest, HmacCheckKeySizes) {
+    for (size_t key_size = 0; key_size <= 512; ++key_size) {
+        if (key_size < 64 || key_size % 8 != 0) {
+            // To keep this test from being very slow, we only test a random fraction of
+            // non-byte key sizes.  We test only ~10% of such cases. Since there are 392 of
+            // them, we expect to run ~40 of them in each run.
+            if (key_size % 8 == 0 || random() % 10 == 0) {
+                EXPECT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
+                          GenerateKey(AuthorizationSetBuilder()
+                                              .HmacKey(key_size)
+                                              .Digest(Digest::SHA_2_256)
+                                              .Authorization(TAG_MIN_MAC_LENGTH, 256)))
+                        << "HMAC key size " << key_size << " invalid";
+            }
+        } else {
+            EXPECT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                         .HmacKey(key_size)
+                                                         .Digest(Digest::SHA_2_256)
+                                                         .Authorization(TAG_MIN_MAC_LENGTH, 256)))
+                    << "Failed to generate HMAC key of size " << key_size;
+            CheckedDeleteKey();
+        }
+    }
+}
+
+/*
+ * NewKeyGenerationTest.HmacCheckMinMacLengths
+ *
+ * Verifies that keymint supports all required MAC lengths and rejects all invalid lengths. This
+ * test is probabilistic in order to keep the runtime down, but any failure prints out the
+ * specific MAC length that failed, so reproducing a failed run will be easy.
+ */
+TEST_P(NewKeyGenerationTest, HmacCheckMinMacLengths) {
+    for (size_t min_mac_length = 0; min_mac_length <= 256; ++min_mac_length) {
+        if (min_mac_length < 64 || min_mac_length % 8 != 0) {
+            // To keep this test from being very long, we only test a random fraction of
+            // non-byte lengths.  We test only ~10% of such cases. Since there are 172 of them,
+            // we expect to run ~17 of them in each run.
+            if (min_mac_length % 8 == 0 || random() % 10 == 0) {
+                EXPECT_EQ(ErrorCode::UNSUPPORTED_MIN_MAC_LENGTH,
+                          GenerateKey(AuthorizationSetBuilder()
+                                              .HmacKey(128)
+                                              .Digest(Digest::SHA_2_256)
+                                              .Authorization(TAG_MIN_MAC_LENGTH, min_mac_length)))
+                        << "HMAC min mac length " << min_mac_length << " invalid.";
+            }
+        } else {
+            EXPECT_EQ(ErrorCode::OK,
+                      GenerateKey(AuthorizationSetBuilder()
+                                          .HmacKey(128)
+                                          .Digest(Digest::SHA_2_256)
+                                          .Authorization(TAG_MIN_MAC_LENGTH, min_mac_length)))
+                    << "Failed to generate HMAC key with min MAC length " << min_mac_length;
+            CheckedDeleteKey();
+        }
+    }
+}
+
+/*
+ * NewKeyGenerationTest.HmacMultipleDigests
+ *
+ * Verifies that keymint rejects HMAC key generation with multiple specified digest algorithms.
+ */
+TEST_P(NewKeyGenerationTest, HmacMultipleDigests) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_DIGEST,
+              GenerateKey(AuthorizationSetBuilder()
+                                  .HmacKey(128)
+                                  .Digest(Digest::SHA1)
+                                  .Digest(Digest::SHA_2_256)
+                                  .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+}
+
+/*
+ * NewKeyGenerationTest.HmacDigestNone
+ *
+ * Verifies that keymint rejects HMAC key generation with no digest or Digest::NONE
+ */
+TEST_P(NewKeyGenerationTest, HmacDigestNone) {
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_DIGEST,
+              GenerateKey(AuthorizationSetBuilder().HmacKey(128).Authorization(TAG_MIN_MAC_LENGTH,
+                                                                               128)));
+
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_DIGEST,
+              GenerateKey(AuthorizationSetBuilder()
+                                  .HmacKey(128)
+                                  .Digest(Digest::NONE)
+                                  .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(NewKeyGenerationTest);
+
+typedef KeyMintAidlTestBase SigningOperationsTest;
+
+/*
+ * SigningOperationsTest.RsaSuccess
+ *
+ * Verifies that raw RSA signature operations succeed.
+ */
+TEST_P(SigningOperationsTest, RsaSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)));
+    string message = "12345678901234567890123456789012";
+    string signature = SignMessage(
+            message, AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE));
+}
+
+/*
+ * SigningOperationsTest.RsaUseRequiresCorrectAppIdAppData
+ *
+ * Verifies that using an RSA key requires the correct app ID/data.
+ */
+TEST_P(SigningOperationsTest, RsaUseRequiresCorrectAppIdAppData) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_APPLICATION_ID, "clientid")
+                                                 .Authorization(TAG_APPLICATION_DATA, "appdata")));
+    EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+              Begin(KeyPurpose::SIGN,
+                    AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE)));
+    AbortIfNeeded();
+    EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Padding(PaddingMode::NONE)
+                                              .Authorization(TAG_APPLICATION_ID, "clientid")));
+    AbortIfNeeded();
+    EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Padding(PaddingMode::NONE)
+                                              .Authorization(TAG_APPLICATION_DATA, "appdata")));
+    AbortIfNeeded();
+    EXPECT_EQ(ErrorCode::OK,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Padding(PaddingMode::NONE)
+                                              .Authorization(TAG_APPLICATION_DATA, "appdata")
+                                              .Authorization(TAG_APPLICATION_ID, "clientid")));
+    AbortIfNeeded();
+}
+
+/*
+ * SigningOperationsTest.RsaPssSha256Success
+ *
+ * Verifies that RSA-PSS signature operations succeed.
+ */
+TEST_P(SigningOperationsTest, RsaPssSha256Success) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::SHA_2_256)
+                                                 .Padding(PaddingMode::RSA_PSS)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)));
+    // Use large message, which won't work without digesting.
+    string message(1024, 'a');
+    string signature = SignMessage(
+            message,
+            AuthorizationSetBuilder().Digest(Digest::SHA_2_256).Padding(PaddingMode::RSA_PSS));
+}
+
+/*
+ * SigningOperationsTest.RsaPaddingNoneDoesNotAllowOther
+ *
+ * Verifies that keymint rejects signature operations that specify a padding mode when the key
+ * supports only unpadded operations.
+ */
+TEST_P(SigningOperationsTest, RsaPaddingNoneDoesNotAllowOther) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+    string message = "12345678901234567890123456789012";
+    string signature;
+
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_PADDING_MODE,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+}
+
+/*
+ * SigningOperationsTest.NoUserConfirmation
+ *
+ * Verifies that keymint rejects signing operations for keys with
+ * TRUSTED_CONFIRMATION_REQUIRED and no valid confirmation token
+ * presented.
+ */
+TEST_P(SigningOperationsTest, NoUserConfirmation) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+    ASSERT_EQ(ErrorCode::OK,
+              GenerateKey(AuthorizationSetBuilder()
+                                  .RsaSigningKey(1024, 65537)
+                                  .Digest(Digest::NONE)
+                                  .Padding(PaddingMode::NONE)
+                                  .Authorization(TAG_NO_AUTH_REQUIRED)
+                                  .Authorization(TAG_TRUSTED_CONFIRMATION_REQUIRED)));
+
+    const string message = "12345678901234567890123456789012";
+    EXPECT_EQ(ErrorCode::OK,
+              Begin(KeyPurpose::SIGN,
+                    AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE)));
+    string signature;
+    EXPECT_EQ(ErrorCode::NO_USER_CONFIRMATION, Finish(message, &signature));
+}
+
+/*
+ * SigningOperationsTest.RsaPkcs1Sha256Success
+ *
+ * Verifies that digested RSA-PKCS1 signature operations succeed.
+ */
+TEST_P(SigningOperationsTest, RsaPkcs1Sha256Success) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::SHA_2_256)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+    string message(1024, 'a');
+    string signature = SignMessage(message, AuthorizationSetBuilder()
+                                                    .Digest(Digest::SHA_2_256)
+                                                    .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN));
+}
+
+/*
+ * SigningOperationsTest.RsaPkcs1NoDigestSuccess
+ *
+ * Verifies that undigested RSA-PKCS1 signature operations succeed.
+ */
+TEST_P(SigningOperationsTest, RsaPkcs1NoDigestSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+    string message(53, 'a');
+    string signature = SignMessage(message, AuthorizationSetBuilder()
+                                                    .Digest(Digest::NONE)
+                                                    .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN));
+}
+
+/*
+ * SigningOperationsTest.RsaPkcs1NoDigestTooLarge
+ *
+ * Verifies that undigested RSA-PKCS1 signature operations fail with the correct error code when
+ * given a too-long message.
+ */
+TEST_P(SigningOperationsTest, RsaPkcs1NoDigestTooLong) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+    string message(257, 'a');
+
+    EXPECT_EQ(ErrorCode::OK,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+    string signature;
+    EXPECT_EQ(ErrorCode::INVALID_INPUT_LENGTH, Finish(message, &signature));
+}
+
+/*
+ * SigningOperationsTest.RsaPssSha512TooSmallKey
+ *
+ * Verifies that undigested RSA-PSS signature operations fail with the correct error code when
+ * used with a key that is too small for the message.
+ *
+ * A PSS-padded message is of length salt_size + digest_size + 16 (sizes in bits), and the
+ * keymint specification requires that salt_size == digest_size, so the message will be
+ * digest_size * 2 +
+ * 16. Such a message can only be signed by a given key if the key is at least that size. This
+ * test uses SHA512, which has a digest_size == 512, so the message size is 1040 bits, too large
+ * for a 1024-bit key.
+ */
+TEST_P(SigningOperationsTest, RsaPssSha512TooSmallKey) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(1024, 65537)
+                                                 .Digest(Digest::SHA_2_512)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::RSA_PSS)));
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_DIGEST,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::SHA_2_512)
+                                              .Padding(PaddingMode::RSA_PSS)));
+}
+
+/*
+ * SigningOperationsTest.RsaNoPaddingTooLong
+ *
+ * Verifies that raw RSA signature operations fail with the correct error code when
+ * given a too-long message.
+ */
+TEST_P(SigningOperationsTest, RsaNoPaddingTooLong) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+    // One byte too long
+    string message(2048 / 8 + 1, 'a');
+    ASSERT_EQ(ErrorCode::OK,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+    string result;
+    ErrorCode finish_error_code = Finish(message, &result);
+    EXPECT_TRUE(finish_error_code == ErrorCode::INVALID_INPUT_LENGTH ||
+                finish_error_code == ErrorCode::INVALID_ARGUMENT);
+
+    // Very large message that should exceed the transfer buffer size of any reasonable TEE.
+    message = string(128 * 1024, 'a');
+    ASSERT_EQ(ErrorCode::OK,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN)));
+    finish_error_code = Finish(message, &result);
+    EXPECT_TRUE(finish_error_code == ErrorCode::INVALID_INPUT_LENGTH ||
+                finish_error_code == ErrorCode::INVALID_ARGUMENT);
+}
+
+/*
+ * SigningOperationsTest.RsaAbort
+ *
+ * Verifies that operations can be aborted correctly.  Uses an RSA signing operation for the
+ * test, but the behavior should be algorithm and purpose-independent.
+ */
+TEST_P(SigningOperationsTest, RsaAbort) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+
+    ASSERT_EQ(ErrorCode::OK,
+              Begin(KeyPurpose::SIGN,
+                    AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE)));
+    EXPECT_EQ(ErrorCode::OK, Abort());
+
+    // Another abort should fail
+    EXPECT_EQ(ErrorCode::INVALID_OPERATION_HANDLE, Abort());
+
+    // Set to sentinel, so TearDown() doesn't try to abort again.
+    op_.clear();
+}
+
+/*
+ * SigningOperationsTest.RsaUnsupportedPadding
+ *
+ * Verifies that RSA operations fail with the correct error (but key gen succeeds) when used
+ * with a padding mode inappropriate for RSA.
+ */
+TEST_P(SigningOperationsTest, RsaUnsupportedPadding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Digest(Digest::SHA_2_256 /* supported digest */)
+                                                 .Padding(PaddingMode::PKCS7)));
+    ASSERT_EQ(
+            ErrorCode::UNSUPPORTED_PADDING_MODE,
+            Begin(KeyPurpose::SIGN,
+                  AuthorizationSetBuilder().Digest(Digest::SHA_2_256).Padding(PaddingMode::PKCS7)));
+}
+
+/*
+ * SigningOperationsTest.RsaPssNoDigest
+ *
+ * Verifies that RSA PSS operations fail when no digest is used.  PSS requires a digest.
+ */
+TEST_P(SigningOperationsTest, RsaNoDigest) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Digest(Digest::NONE)
+                                                 .Padding(PaddingMode::RSA_PSS)));
+    ASSERT_EQ(ErrorCode::INCOMPATIBLE_DIGEST,
+              Begin(KeyPurpose::SIGN,
+                    AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::RSA_PSS)));
+
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_DIGEST,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder().Padding(PaddingMode::RSA_PSS)));
+}
+
+/*
+ * SigningOperationsTest.RsaPssNoDigest
+ *
+ * Verifies that RSA operations fail when no padding mode is specified.  PaddingMode::NONE is
+ * supported in some cases (as validated in other tests), but a mode must be specified.
+ */
+TEST_P(SigningOperationsTest, RsaNoPadding) {
+    // Padding must be specified
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .RsaKey(2048, 65537)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .SigningKey()
+                                                 .Digest(Digest::NONE)));
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_PADDING_MODE,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder().Digest(Digest::NONE)));
+}
+
+/*
+ * SigningOperationsTest.RsaShortMessage
+ *
+ * Verifies that raw RSA signatures succeed with a message shorter than the key size.
+ */
+TEST_P(SigningOperationsTest, RsaTooShortMessage) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Padding(PaddingMode::NONE)));
+
+    // Barely shorter
+    string message(2048 / 8 - 1, 'a');
+    SignMessage(message, AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE));
+
+    // Much shorter
+    message = "a";
+    SignMessage(message, AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE));
+}
+
+/*
+ * SigningOperationsTest.RsaSignWithEncryptionKey
+ *
+ * Verifies that RSA encryption keys cannot be used to sign.
+ */
+TEST_P(SigningOperationsTest, RsaSignWithEncryptionKey) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Padding(PaddingMode::NONE)));
+    ASSERT_EQ(ErrorCode::INCOMPATIBLE_PURPOSE,
+              Begin(KeyPurpose::SIGN,
+                    AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE)));
+}
+
+/*
+ * SigningOperationsTest.RsaSignTooLargeMessage
+ *
+ * Verifies that attempting a raw signature of a message which is the same length as the key,
+ * but numerically larger than the public modulus, fails with the correct error.
+ */
+TEST_P(SigningOperationsTest, RsaSignTooLargeMessage) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Padding(PaddingMode::NONE)));
+
+    // Largest possible message will always be larger than the public modulus.
+    string message(2048 / 8, static_cast<char>(0xff));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                                             .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                             .Digest(Digest::NONE)
+                                                             .Padding(PaddingMode::NONE)));
+    string signature;
+    ASSERT_EQ(ErrorCode::INVALID_ARGUMENT, Finish(message, &signature));
+}
+
+/*
+ * SigningOperationsTest.EcdsaAllSizesAndHashes
+ *
+ * Verifies that ECDSA operations succeed with all possible key sizes and hashes.
+ */
+TEST_P(SigningOperationsTest, EcdsaAllSizesAndHashes) {
+    for (auto key_size : ValidKeySizes(Algorithm::EC)) {
+        for (auto digest : ValidDigests(false /* withNone */, false /* withMD5 */)) {
+            ErrorCode error = GenerateKey(AuthorizationSetBuilder()
+                                                  .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                  .EcdsaSigningKey(key_size)
+                                                  .Digest(digest));
+            EXPECT_EQ(ErrorCode::OK, error) << "Failed to generate ECDSA key with size " << key_size
+                                            << " and digest " << digest;
+            if (error != ErrorCode::OK) continue;
+
+            string message(1024, 'a');
+            if (digest == Digest::NONE) message.resize(key_size / 8);
+            SignMessage(message, AuthorizationSetBuilder().Digest(digest));
+            CheckedDeleteKey();
+        }
+    }
+}
+
+/*
+ * SigningOperationsTest.EcdsaAllCurves
+ *
+ * Verifies that ECDSA operations succeed with all possible curves.
+ */
+TEST_P(SigningOperationsTest, EcdsaAllCurves) {
+    for (auto curve : ValidCurves()) {
+        ErrorCode error = GenerateKey(AuthorizationSetBuilder()
+                                              .Authorization(TAG_NO_AUTH_REQUIRED)
+                                              .EcdsaSigningKey(curve)
+                                              .Digest(Digest::SHA_2_256));
+        EXPECT_EQ(ErrorCode::OK, error) << "Failed to generate ECDSA key with curve " << curve;
+        if (error != ErrorCode::OK) continue;
+
+        string message(1024, 'a');
+        SignMessage(message, AuthorizationSetBuilder().Digest(Digest::SHA_2_256));
+        CheckedDeleteKey();
+    }
+}
+
+/*
+ * SigningOperationsTest.EcdsaNoDigestHugeData
+ *
+ * Verifies that ECDSA operations support very large messages, even without digesting.  This
+ * should work because ECDSA actually only signs the leftmost L_n bits of the message, however
+ * large it may be.  Not using digesting is a bad idea, but in some cases digesting is done by
+ * the framework.
+ */
+TEST_P(SigningOperationsTest, EcdsaNoDigestHugeData) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .EcdsaSigningKey(256)
+                                                 .Digest(Digest::NONE)));
+    string message(1 * 1024, 'a');
+    SignMessage(message, AuthorizationSetBuilder().Digest(Digest::NONE));
+}
+
+/*
+ * SigningOperationsTest.EcUseRequiresCorrectAppIdAppData
+ *
+ * Verifies that using an EC key requires the correct app ID/data.
+ */
+TEST_P(SigningOperationsTest, EcUseRequiresCorrectAppIdAppData) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .EcdsaSigningKey(256)
+                                                 .Digest(Digest::NONE)
+                                                 .Authorization(TAG_APPLICATION_ID, "clientid")
+                                                 .Authorization(TAG_APPLICATION_DATA, "appdata")));
+    EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder().Digest(Digest::NONE)));
+    AbortIfNeeded();
+    EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Authorization(TAG_APPLICATION_ID, "clientid")));
+    AbortIfNeeded();
+    EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Authorization(TAG_APPLICATION_DATA, "appdata")));
+    AbortIfNeeded();
+    EXPECT_EQ(ErrorCode::OK,
+              Begin(KeyPurpose::SIGN, AuthorizationSetBuilder()
+                                              .Digest(Digest::NONE)
+                                              .Authorization(TAG_APPLICATION_DATA, "appdata")
+                                              .Authorization(TAG_APPLICATION_ID, "clientid")));
+    AbortIfNeeded();
+}
+
+/*
+ * SigningOperationsTest.AesEcbSign
+ *
+ * Verifies that attempts to use AES keys to sign fail in the correct way.
+ */
+TEST_P(SigningOperationsTest, AesEcbSign) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .SigningKey()
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::ECB)));
+
+    AuthorizationSet out_params;
+    EXPECT_EQ(ErrorCode::UNSUPPORTED_PURPOSE,
+              Begin(KeyPurpose::SIGN, AuthorizationSet() /* in_params */, &out_params));
+    EXPECT_EQ(ErrorCode::UNSUPPORTED_PURPOSE,
+              Begin(KeyPurpose::VERIFY, AuthorizationSet() /* in_params */, &out_params));
+}
+
+/*
+ * SigningOperationsTest.HmacAllDigests
+ *
+ * Verifies that HMAC works with all digests.
+ */
+TEST_P(SigningOperationsTest, HmacAllDigests) {
+    for (auto digest : ValidDigests(false /* withNone */, false /* withMD5 */)) {
+        ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                     .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                     .HmacKey(128)
+                                                     .Digest(digest)
+                                                     .Authorization(TAG_MIN_MAC_LENGTH, 160)))
+                << "Failed to create HMAC key with digest " << digest;
+        string message = "12345678901234567890123456789012";
+        string signature = MacMessage(message, digest, 160);
+        EXPECT_EQ(160U / 8U, signature.size())
+                << "Failed to sign with HMAC key with digest " << digest;
+        CheckedDeleteKey();
+    }
+}
+
+/*
+ * SigningOperationsTest.HmacSha256TooLargeMacLength
+ *
+ * Verifies that HMAC fails in the correct way when asked to generate a MAC larger than the
+ * digest size.
+ */
+TEST_P(SigningOperationsTest, HmacSha256TooLargeMacLength) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .HmacKey(128)
+                                                 .Digest(Digest::SHA_2_256)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 256)));
+    AuthorizationSet output_params;
+    EXPECT_EQ(ErrorCode::UNSUPPORTED_MAC_LENGTH, Begin(KeyPurpose::SIGN, key_blob_,
+                                                       AuthorizationSetBuilder()
+                                                               .Digest(Digest::SHA_2_256)
+                                                               .Authorization(TAG_MAC_LENGTH, 264),
+                                                       &output_params));
+}
+
+/*
+ * SigningOperationsTest.HmacSha256TooSmallMacLength
+ *
+ * Verifies that HMAC fails in the correct way when asked to generate a MAC smaller than the
+ * specified minimum MAC length.
+ */
+TEST_P(SigningOperationsTest, HmacSha256TooSmallMacLength) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .HmacKey(128)
+                                                 .Digest(Digest::SHA_2_256)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+    AuthorizationSet output_params;
+    EXPECT_EQ(ErrorCode::INVALID_MAC_LENGTH, Begin(KeyPurpose::SIGN, key_blob_,
+                                                   AuthorizationSetBuilder()
+                                                           .Digest(Digest::SHA_2_256)
+                                                           .Authorization(TAG_MAC_LENGTH, 120),
+                                                   &output_params));
+}
+
+/*
+ * SigningOperationsTest.HmacRfc4231TestCase3
+ *
+ * Validates against the test vectors from RFC 4231 test case 3.
+ */
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase3) {
+    string key(20, 0xaa);
+    string message(50, 0xdd);
+    uint8_t sha_224_expected[] = {
+            0x7f, 0xb3, 0xcb, 0x35, 0x88, 0xc6, 0xc1, 0xf6, 0xff, 0xa9, 0x69, 0x4d, 0x7d, 0x6a,
+            0xd2, 0x64, 0x93, 0x65, 0xb0, 0xc1, 0xf6, 0x5d, 0x69, 0xd1, 0xec, 0x83, 0x33, 0xea,
+    };
+    uint8_t sha_256_expected[] = {
+            0x77, 0x3e, 0xa9, 0x1e, 0x36, 0x80, 0x0e, 0x46, 0x85, 0x4d, 0xb8,
+            0xeb, 0xd0, 0x91, 0x81, 0xa7, 0x29, 0x59, 0x09, 0x8b, 0x3e, 0xf8,
+            0xc1, 0x22, 0xd9, 0x63, 0x55, 0x14, 0xce, 0xd5, 0x65, 0xfe,
+    };
+    uint8_t sha_384_expected[] = {
+            0x88, 0x06, 0x26, 0x08, 0xd3, 0xe6, 0xad, 0x8a, 0x0a, 0xa2, 0xac, 0xe0,
+            0x14, 0xc8, 0xa8, 0x6f, 0x0a, 0xa6, 0x35, 0xd9, 0x47, 0xac, 0x9f, 0xeb,
+            0xe8, 0x3e, 0xf4, 0xe5, 0x59, 0x66, 0x14, 0x4b, 0x2a, 0x5a, 0xb3, 0x9d,
+            0xc1, 0x38, 0x14, 0xb9, 0x4e, 0x3a, 0xb6, 0xe1, 0x01, 0xa3, 0x4f, 0x27,
+    };
+    uint8_t sha_512_expected[] = {
+            0xfa, 0x73, 0xb0, 0x08, 0x9d, 0x56, 0xa2, 0x84, 0xef, 0xb0, 0xf0, 0x75, 0x6c,
+            0x89, 0x0b, 0xe9, 0xb1, 0xb5, 0xdb, 0xdd, 0x8e, 0xe8, 0x1a, 0x36, 0x55, 0xf8,
+            0x3e, 0x33, 0xb2, 0x27, 0x9d, 0x39, 0xbf, 0x3e, 0x84, 0x82, 0x79, 0xa7, 0x22,
+            0xc8, 0x06, 0xb4, 0x85, 0xa4, 0x7e, 0x67, 0xc8, 0x07, 0xb9, 0x46, 0xa3, 0x37,
+            0xbe, 0xe8, 0x94, 0x26, 0x74, 0x27, 0x88, 0x59, 0xe1, 0x32, 0x92, 0xfb,
+    };
+
+    CheckHmacTestVector(key, message, Digest::SHA_2_256, make_string(sha_256_expected));
+    if (SecLevel() != SecurityLevel::STRONGBOX) {
+        CheckHmacTestVector(key, message, Digest::SHA_2_224, make_string(sha_224_expected));
+        CheckHmacTestVector(key, message, Digest::SHA_2_384, make_string(sha_384_expected));
+        CheckHmacTestVector(key, message, Digest::SHA_2_512, make_string(sha_512_expected));
+    }
+}
+
+/*
+ * SigningOperationsTest.HmacRfc4231TestCase5
+ *
+ * Validates against the test vectors from RFC 4231 test case 5.
+ */
+TEST_P(SigningOperationsTest, HmacRfc4231TestCase5) {
+    string key(20, 0x0c);
+    string message = "Test With Truncation";
+
+    uint8_t sha_224_expected[] = {
+            0x0e, 0x2a, 0xea, 0x68, 0xa9, 0x0c, 0x8d, 0x37,
+            0xc9, 0x88, 0xbc, 0xdb, 0x9f, 0xca, 0x6f, 0xa8,
+    };
+    uint8_t sha_256_expected[] = {
+            0xa3, 0xb6, 0x16, 0x74, 0x73, 0x10, 0x0e, 0xe0,
+            0x6e, 0x0c, 0x79, 0x6c, 0x29, 0x55, 0x55, 0x2b,
+    };
+    uint8_t sha_384_expected[] = {
+            0x3a, 0xbf, 0x34, 0xc3, 0x50, 0x3b, 0x2a, 0x23,
+            0xa4, 0x6e, 0xfc, 0x61, 0x9b, 0xae, 0xf8, 0x97,
+    };
+    uint8_t sha_512_expected[] = {
+            0x41, 0x5f, 0xad, 0x62, 0x71, 0x58, 0x0a, 0x53,
+            0x1d, 0x41, 0x79, 0xbc, 0x89, 0x1d, 0x87, 0xa6,
+    };
+
+    CheckHmacTestVector(key, message, Digest::SHA_2_256, make_string(sha_256_expected));
+    if (SecLevel() != SecurityLevel::STRONGBOX) {
+        CheckHmacTestVector(key, message, Digest::SHA_2_224, make_string(sha_224_expected));
+        CheckHmacTestVector(key, message, Digest::SHA_2_384, make_string(sha_384_expected));
+        CheckHmacTestVector(key, message, Digest::SHA_2_512, make_string(sha_512_expected));
+    }
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(SigningOperationsTest);
+
+typedef KeyMintAidlTestBase VerificationOperationsTest;
+
+/*
+ * VerificationOperationsTest.RsaSuccess
+ *
+ * Verifies that a simple RSA signature/verification sequence succeeds.
+ */
+TEST_P(VerificationOperationsTest, RsaSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaSigningKey(2048, 65537)
+                                                 .Digest(Digest::NONE)
+                                                 .Padding(PaddingMode::NONE)));
+    string message = "12345678901234567890123456789012";
+    string signature = SignMessage(
+            message, AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE));
+    VerifyMessage(message, signature,
+                  AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE));
+}
+
+/*
+ * VerificationOperationsTest.RsaSuccess
+ *
+ * Verifies RSA signature/verification for all padding modes and digests.
+ */
+TEST_P(VerificationOperationsTest, RsaAllPaddingsAndDigests) {
+    auto authorizations = AuthorizationSetBuilder()
+                                  .Authorization(TAG_NO_AUTH_REQUIRED)
+                                  .RsaSigningKey(2048, 65537)
+                                  .Digest(ValidDigests(true /* withNone */, true /* withMD5 */))
+                                  .Padding(PaddingMode::NONE)
+                                  .Padding(PaddingMode::RSA_PSS)
+                                  .Padding(PaddingMode::RSA_PKCS1_1_5_SIGN);
+
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(authorizations));
+
+    string message(128, 'a');
+    string corrupt_message(message);
+    ++corrupt_message[corrupt_message.size() / 2];
+
+    for (auto padding :
+         {PaddingMode::NONE, PaddingMode::RSA_PSS, PaddingMode::RSA_PKCS1_1_5_SIGN}) {
+        for (auto digest : ValidDigests(true /* withNone */, true /* withMD5 */)) {
+            if (padding == PaddingMode::NONE && digest != Digest::NONE) {
+                // Digesting only makes sense with padding.
+                continue;
+            }
+
+            if (padding == PaddingMode::RSA_PSS && digest == Digest::NONE) {
+                // PSS requires digesting.
+                continue;
+            }
+
+            string signature =
+                    SignMessage(message, AuthorizationSetBuilder().Digest(digest).Padding(padding));
+            VerifyMessage(message, signature,
+                          AuthorizationSetBuilder().Digest(digest).Padding(padding));
+
+            /* TODO(seleneh) add exportkey tests back later when we have decided on
+             * the new api.
+                        if (digest != Digest::NONE) {
+                            // Verify with OpenSSL.
+                            vector<uint8_t> pubkey;
+                            ASSERT_EQ(ErrorCode::OK, ExportKey(KeyFormat::X509, &pubkey));
+
+                            const uint8_t* p = pubkey.data();
+                            EVP_PKEY_Ptr pkey(d2i_PUBKEY(nullptr, &p, pubkey.size()));
+                            ASSERT_TRUE(pkey.get());
+
+                            EVP_MD_CTX digest_ctx;
+                            EVP_MD_CTX_init(&digest_ctx);
+                            EVP_PKEY_CTX* pkey_ctx;
+                            const EVP_MD* md = openssl_digest(digest);
+                            ASSERT_NE(md, nullptr);
+                            EXPECT_EQ(1, EVP_DigestVerifyInit(&digest_ctx, &pkey_ctx, md,
+             nullptr, pkey.get()));
+
+                            switch (padding) {
+                                case PaddingMode::RSA_PSS:
+                                    EXPECT_GT(EVP_PKEY_CTX_set_rsa_padding(pkey_ctx,
+               RSA_PKCS1_PSS_PADDING), 0); EXPECT_GT(EVP_PKEY_CTX_set_rsa_pss_saltlen(pkey_ctx,
+               EVP_MD_size(md)), 0); break; case PaddingMode::RSA_PKCS1_1_5_SIGN:
+                                    // PKCS1 is the default; don't need to set anything.
+                                    break;
+                                default:
+                                    FAIL();
+                                    break;
+                            }
+
+                            EXPECT_EQ(1, EVP_DigestVerifyUpdate(&digest_ctx, message.data(),
+               message.size())); EXPECT_EQ(1, EVP_DigestVerifyFinal(&digest_ctx,
+                                                            reinterpret_cast<const
+               uint8_t*>(signature.data()), signature.size())); EVP_MD_CTX_cleanup(&digest_ctx);
+                        }
+            */
+
+            // Corrupt signature shouldn't verify.
+            string corrupt_signature(signature);
+            ++corrupt_signature[corrupt_signature.size() / 2];
+
+            EXPECT_EQ(ErrorCode::OK,
+                      Begin(KeyPurpose::VERIFY,
+                            AuthorizationSetBuilder().Digest(digest).Padding(padding)));
+            string result;
+            EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(message, corrupt_signature, &result));
+
+            // Corrupt message shouldn't verify
+            EXPECT_EQ(ErrorCode::OK,
+                      Begin(KeyPurpose::VERIFY,
+                            AuthorizationSetBuilder().Digest(digest).Padding(padding)));
+            EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(corrupt_message, signature, &result));
+        }
+    }
+}
+
+/*
+ * VerificationOperationsTest.RsaSuccess
+ *
+ * Verifies ECDSA signature/verification for all digests and curves.
+ */
+TEST_P(VerificationOperationsTest, EcdsaAllDigestsAndCurves) {
+    auto digests = ValidDigests(true /* withNone */, false /* withMD5 */);
+
+    string message = "1234567890";
+    string corrupt_message = "2234567890";
+    for (auto curve : ValidCurves()) {
+        ErrorCode error = GenerateKey(AuthorizationSetBuilder()
+                                              .Authorization(TAG_NO_AUTH_REQUIRED)
+                                              .EcdsaSigningKey(curve)
+                                              .Digest(digests));
+        EXPECT_EQ(ErrorCode::OK, error) << "Failed to generate key for EC curve " << curve;
+        if (error != ErrorCode::OK) {
+            continue;
+        }
+
+        for (auto digest : digests) {
+            string signature = SignMessage(message, AuthorizationSetBuilder().Digest(digest));
+            VerifyMessage(message, signature, AuthorizationSetBuilder().Digest(digest));
+
+            /* TODO(seleneh) add exportkey tests back later when we have decided on
+             * the new api.
+
+                        // Verify with OpenSSL
+                        if (digest != Digest::NONE) {
+                            vector<uint8_t> pubkey;
+                            ASSERT_EQ(ErrorCode::OK, ExportKey(KeyFormat::X509, &pubkey))
+                                    << curve << ' ' << digest;
+
+                            const uint8_t* p = pubkey.data();
+                            EVP_PKEY_Ptr pkey(d2i_PUBKEY(nullptr, &p, pubkey.size()));
+                            ASSERT_TRUE(pkey.get());
+
+                            EVP_MD_CTX digest_ctx;
+                            EVP_MD_CTX_init(&digest_ctx);
+                            EVP_PKEY_CTX* pkey_ctx;
+                            const EVP_MD* md = openssl_digest(digest);
+
+                            EXPECT_EQ(1, EVP_DigestVerifyInit(&digest_ctx, &pkey_ctx, md,
+             nullptr, pkey.get()))
+                                    << curve << ' ' << digest;
+
+                            EXPECT_EQ(1, EVP_DigestVerifyUpdate(&digest_ctx, message.data(),
+               message.size()))
+                                    << curve << ' ' << digest;
+
+                            EXPECT_EQ(1,
+                                      EVP_DigestVerifyFinal(&digest_ctx,
+                                                            reinterpret_cast<const
+               uint8_t*>(signature.data()), signature.size()))
+                                    << curve << ' ' << digest;
+
+                            EVP_MD_CTX_cleanup(&digest_ctx);
+                        }
+            */
+            // Corrupt signature shouldn't verify.
+            string corrupt_signature(signature);
+            ++corrupt_signature[corrupt_signature.size() / 2];
+
+            EXPECT_EQ(ErrorCode::OK,
+                      Begin(KeyPurpose::VERIFY, AuthorizationSetBuilder().Digest(digest)))
+                    << curve << ' ' << digest;
+
+            string result;
+            EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(message, corrupt_signature, &result))
+                    << curve << ' ' << digest;
+
+            // Corrupt message shouldn't verify
+            EXPECT_EQ(ErrorCode::OK,
+                      Begin(KeyPurpose::VERIFY, AuthorizationSetBuilder().Digest(digest)))
+                    << curve << ' ' << digest;
+
+            EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(corrupt_message, signature, &result))
+                    << curve << ' ' << digest;
+        }
+
+        auto rc = DeleteKey();
+        ASSERT_TRUE(rc == ErrorCode::OK || rc == ErrorCode::UNIMPLEMENTED);
+    }
+}
+
+/*
+ * VerificationOperationsTest.HmacSigningKeyCannotVerify
+ *
+ * Verifies HMAC signing and verification, but that a signing key cannot be used to verify.
+ */
+TEST_P(VerificationOperationsTest, HmacSigningKeyCannotVerify) {
+    string key_material = "HelloThisIsAKey";
+
+    vector<uint8_t> signing_key, verification_key;
+    KeyCharacteristics signing_key_chars, verification_key_chars;
+    EXPECT_EQ(ErrorCode::OK,
+              ImportKey(AuthorizationSetBuilder()
+                                .Authorization(TAG_NO_AUTH_REQUIRED)
+                                .Authorization(TAG_ALGORITHM, Algorithm::HMAC)
+                                .Authorization(TAG_PURPOSE, KeyPurpose::SIGN)
+                                .Digest(Digest::SHA_2_256)
+                                .Authorization(TAG_MIN_MAC_LENGTH, 160),
+                        KeyFormat::RAW, key_material, &signing_key, &signing_key_chars));
+    EXPECT_EQ(ErrorCode::OK,
+              ImportKey(AuthorizationSetBuilder()
+                                .Authorization(TAG_NO_AUTH_REQUIRED)
+                                .Authorization(TAG_ALGORITHM, Algorithm::HMAC)
+                                .Authorization(TAG_PURPOSE, KeyPurpose::VERIFY)
+                                .Digest(Digest::SHA_2_256)
+                                .Authorization(TAG_MIN_MAC_LENGTH, 160),
+                        KeyFormat::RAW, key_material, &verification_key, &verification_key_chars));
+
+    string message = "This is a message.";
+    string signature = SignMessage(
+            signing_key, message,
+            AuthorizationSetBuilder().Digest(Digest::SHA_2_256).Authorization(TAG_MAC_LENGTH, 160));
+
+    // Signing key should not work.
+    AuthorizationSet out_params;
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_PURPOSE,
+              Begin(KeyPurpose::VERIFY, signing_key,
+                    AuthorizationSetBuilder().Digest(Digest::SHA_2_256), &out_params));
+
+    // Verification key should work.
+    VerifyMessage(verification_key, message, signature,
+                  AuthorizationSetBuilder().Digest(Digest::SHA_2_256));
+
+    CheckedDeleteKey(&signing_key);
+    CheckedDeleteKey(&verification_key);
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(VerificationOperationsTest);
+
+typedef KeyMintAidlTestBase ExportKeyTest;
+
+/*
+ * ExportKeyTest.RsaUnsupportedKeyFormat
+ *
+ * Verifies that attempting to export RSA keys in PKCS#8 format fails with the correct error.
+ */
+// TODO(seleneh) add ExportKey to GenerateKey
+// check result
+
+class ImportKeyTest : public KeyMintAidlTestBase {
+  public:
+    template <TagType tag_type, Tag tag, typename ValueT>
+    void CheckCryptoParam(TypedTag<tag_type, tag> ttag, ValueT expected) {
+        SCOPED_TRACE("CheckCryptoParam");
+        if (IsSecure()) {
+            EXPECT_TRUE(contains(key_characteristics_.hardwareEnforced, ttag, expected))
+                    << "Tag " << tag << " with value " << expected << " not found";
+            EXPECT_FALSE(contains(key_characteristics_.softwareEnforced, ttag))
+                    << "Tag " << tag << " found";
+        } else {
+            EXPECT_TRUE(contains(key_characteristics_.softwareEnforced, ttag, expected))
+                    << "Tag " << tag << " with value " << expected << " not found";
+            EXPECT_FALSE(contains(key_characteristics_.hardwareEnforced, ttag))
+                    << "Tag " << tag << " found";
+        }
+    }
+
+    void CheckOrigin() {
+        SCOPED_TRACE("CheckOrigin");
+        if (IsSecure()) {
+            EXPECT_TRUE(contains(key_characteristics_.hardwareEnforced, TAG_ORIGIN,
+                                 KeyOrigin::IMPORTED));
+        } else {
+            EXPECT_TRUE(contains(key_characteristics_.softwareEnforced, TAG_ORIGIN,
+                                 KeyOrigin::IMPORTED));
+        }
+    }
+};
+
+/*
+ * ImportKeyTest.RsaSuccess
+ *
+ * Verifies that importing and using an RSA key pair works correctly.
+ */
+TEST_P(ImportKeyTest, RsaSuccess) {
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .RsaSigningKey(1024, 65537)
+                                               .Digest(Digest::SHA_2_256)
+                                               .Padding(PaddingMode::RSA_PSS),
+                                       KeyFormat::PKCS8, rsa_key));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::RSA);
+    CheckCryptoParam(TAG_KEY_SIZE, 1024U);
+    CheckCryptoParam(TAG_RSA_PUBLIC_EXPONENT, 65537U);
+    CheckCryptoParam(TAG_DIGEST, Digest::SHA_2_256);
+    CheckCryptoParam(TAG_PADDING, PaddingMode::RSA_PSS);
+    CheckOrigin();
+
+    string message(1024 / 8, 'a');
+    auto params = AuthorizationSetBuilder().Digest(Digest::SHA_2_256).Padding(PaddingMode::RSA_PSS);
+    string signature = SignMessage(message, params);
+    VerifyMessage(message, signature, params);
+}
+
+/*
+ * ImportKeyTest.RsaKeySizeMismatch
+ *
+ * Verifies that importing an RSA key pair with a size that doesn't match the key fails in the
+ * correct way.
+ */
+TEST_P(ImportKeyTest, RsaKeySizeMismatch) {
+    ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
+              ImportKey(AuthorizationSetBuilder()
+                                .RsaSigningKey(2048 /* Doesn't match key */, 65537)
+                                .Digest(Digest::NONE)
+                                .Padding(PaddingMode::NONE),
+                        KeyFormat::PKCS8, rsa_key));
+}
+
+/*
+ * ImportKeyTest.RsaPublicExponentMismatch
+ *
+ * Verifies that importing an RSA key pair with a public exponent that doesn't match the key
+ * fails in the correct way.
+ */
+TEST_P(ImportKeyTest, RsaPublicExponentMismatch) {
+    ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
+              ImportKey(AuthorizationSetBuilder()
+                                .RsaSigningKey(1024, 3 /* Doesn't match key */)
+                                .Digest(Digest::NONE)
+                                .Padding(PaddingMode::NONE),
+                        KeyFormat::PKCS8, rsa_key));
+}
+
+/*
+ * ImportKeyTest.EcdsaSuccess
+ *
+ * Verifies that importing and using an ECDSA P-256 key pair works correctly.
+ */
+TEST_P(ImportKeyTest, EcdsaSuccess) {
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaSigningKey(256)
+                                               .Digest(Digest::SHA_2_256),
+                                       KeyFormat::PKCS8, ec_256_key));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_KEY_SIZE, 256U);
+    CheckCryptoParam(TAG_DIGEST, Digest::SHA_2_256);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::P_256);
+
+    CheckOrigin();
+
+    string message(32, 'a');
+    auto params = AuthorizationSetBuilder().Digest(Digest::SHA_2_256);
+    string signature = SignMessage(message, params);
+    VerifyMessage(message, signature, params);
+}
+
+/*
+ * ImportKeyTest.EcdsaP256RFC5915Success
+ *
+ * Verifies that importing and using an ECDSA P-256 key pair encoded using RFC5915 works
+ * correctly.
+ */
+TEST_P(ImportKeyTest, EcdsaP256RFC5915Success) {
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaSigningKey(256)
+                                               .Digest(Digest::SHA_2_256),
+                                       KeyFormat::PKCS8, ec_256_key_rfc5915));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_KEY_SIZE, 256U);
+    CheckCryptoParam(TAG_DIGEST, Digest::SHA_2_256);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::P_256);
+
+    CheckOrigin();
+
+    string message(32, 'a');
+    auto params = AuthorizationSetBuilder().Digest(Digest::SHA_2_256);
+    string signature = SignMessage(message, params);
+    VerifyMessage(message, signature, params);
+}
+
+/*
+ * ImportKeyTest.EcdsaP256SEC1Success
+ *
+ * Verifies that importing and using an ECDSA P-256 key pair encoded using SEC1 works correctly.
+ */
+TEST_P(ImportKeyTest, EcdsaP256SEC1Success) {
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaSigningKey(256)
+                                               .Digest(Digest::SHA_2_256),
+                                       KeyFormat::PKCS8, ec_256_key_sec1));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_KEY_SIZE, 256U);
+    CheckCryptoParam(TAG_DIGEST, Digest::SHA_2_256);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::P_256);
+
+    CheckOrigin();
+
+    string message(32, 'a');
+    auto params = AuthorizationSetBuilder().Digest(Digest::SHA_2_256);
+    string signature = SignMessage(message, params);
+    VerifyMessage(message, signature, params);
+}
+
+/*
+ * ImportKeyTest.Ecdsa521Success
+ *
+ * Verifies that importing and using an ECDSA P-521 key pair works correctly.
+ */
+TEST_P(ImportKeyTest, Ecdsa521Success) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaSigningKey(521)
+                                               .Digest(Digest::SHA_2_256),
+                                       KeyFormat::PKCS8, ec_521_key));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_KEY_SIZE, 521U);
+    CheckCryptoParam(TAG_DIGEST, Digest::SHA_2_256);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::P_521);
+    CheckOrigin();
+
+    string message(32, 'a');
+    auto params = AuthorizationSetBuilder().Digest(Digest::SHA_2_256);
+    string signature = SignMessage(message, params);
+    VerifyMessage(message, signature, params);
+}
+
+/*
+ * ImportKeyTest.EcdsaSizeMismatch
+ *
+ * Verifies that importing an ECDSA key pair with a size that doesn't match the key fails in the
+ * correct way.
+ */
+TEST_P(ImportKeyTest, EcdsaSizeMismatch) {
+    ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
+              ImportKey(AuthorizationSetBuilder()
+                                .EcdsaSigningKey(224 /* Doesn't match key */)
+                                .Digest(Digest::NONE),
+                        KeyFormat::PKCS8, ec_256_key));
+}
+
+/*
+ * ImportKeyTest.EcdsaCurveMismatch
+ *
+ * Verifies that importing an ECDSA key pair with a curve that doesn't match the key fails in
+ * the correct way.
+ */
+TEST_P(ImportKeyTest, EcdsaCurveMismatch) {
+    ASSERT_EQ(ErrorCode::IMPORT_PARAMETER_MISMATCH,
+              ImportKey(AuthorizationSetBuilder()
+                                .EcdsaSigningKey(EcCurve::P_224 /* Doesn't match key */)
+                                .Digest(Digest::NONE),
+                        KeyFormat::PKCS8, ec_256_key));
+}
+
+/*
+ * ImportKeyTest.AesSuccess
+ *
+ * Verifies that importing and using an AES key works.
+ */
+TEST_P(ImportKeyTest, AesSuccess) {
+    string key = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .AesEncryptionKey(key.size() * 8)
+                                               .EcbMode()
+                                               .Padding(PaddingMode::PKCS7),
+                                       KeyFormat::RAW, key));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::AES);
+    CheckCryptoParam(TAG_KEY_SIZE, 128U);
+    CheckCryptoParam(TAG_PADDING, PaddingMode::PKCS7);
+    CheckCryptoParam(TAG_BLOCK_MODE, BlockMode::ECB);
+    CheckOrigin();
+
+    string message = "Hello World!";
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::PKCS7);
+    string ciphertext = EncryptMessage(message, params);
+    string plaintext = DecryptMessage(ciphertext, params);
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * ImportKeyTest.AesSuccess
+ *
+ * Verifies that importing and using an HMAC key works.
+ */
+TEST_P(ImportKeyTest, HmacKeySuccess) {
+    string key = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .HmacKey(key.size() * 8)
+                                               .Digest(Digest::SHA_2_256)
+                                               .Authorization(TAG_MIN_MAC_LENGTH, 256),
+                                       KeyFormat::RAW, key));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::HMAC);
+    CheckCryptoParam(TAG_KEY_SIZE, 128U);
+    CheckCryptoParam(TAG_DIGEST, Digest::SHA_2_256);
+    CheckOrigin();
+
+    string message = "Hello World!";
+    string signature = MacMessage(message, Digest::SHA_2_256, 256);
+    VerifyMessage(message, signature, AuthorizationSetBuilder().Digest(Digest::SHA_2_256));
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(ImportKeyTest);
+
+auto wrapped_key = hex2str(
+        "3082017902010004820100934bf94e2aa28a3f83c9f79297250262fbe3276b5a1c91159bbfa3ef8957aac8"
+        "4b59b30b455a79c2973480823d8b3863c3deef4a8e243590268d80e18751a0e130f67ce6a1ace9f79b95e0"
+        "97474febc981195b1d13a69086c0863f66a7b7fdb48792227b1ac5e2489febdf087ab5486483033a6f001c"
+        "a5d1ec1e27f5c30f4cec2642074a39ae68aee552e196627a8e3d867e67a8c01b11e75f13cca0a97ab668b5"
+        "0cda07a8ecb7cd8e3dd7009c9636534f6f239cffe1fc8daa466f78b676c7119efb96bce4e69ca2a25d0b34"
+        "ed9c3ff999b801597d5220e307eaa5bee507fb94d1fa69f9e519b2de315bac92c36f2ea1fa1df4478c0dde"
+        "deae8c70e0233cd098040cd796b02c370f1fa4cc0124f1302e0201033029a1083106020100020101a20302"
+        "0120a30402020100a4053103020101a6053103020140bf83770205000420ccd540855f833a5e1480bfd2d3"
+        "6faf3aeee15df5beabe2691bc82dde2a7aa910041064c9f689c60ff6223ab6e6999e0eb6e5");
+
+auto wrapped_key_masked = hex2str(
+        "3082017902010004820100aad93ed5924f283b4bb5526fbe7a1412f9d9749ec30db9062b29e574a8546f33"
+        "c88732452f5b8e6a391ee76c39ed1712c61d8df6213dec1cffbc17a8c6d04c7b30893d8daa9b2015213e21"
+        "946821553207f8f9931c4caba23ed3bee28b36947e47f10e0a5c3dc51c988a628daad3e5e1f4005e79c2d5"
+        "a96c284b4b8d7e4948f331e5b85dd5a236f85579f3ea1d1b848487470bdb0ab4f81a12bee42c99fe0df4be"
+        "e3759453e69ad1d68a809ce06b949f7694a990429b2fe81e066ff43e56a21602db70757922a4bcc23ab89f"
+        "1e35da77586775f423e519c2ea394caf48a28d0c8020f1dcf6b3a68ec246f615ae96dae9a079b1f6eb9590"
+        "33c1af5c125fd94168040c6d9721d08589581ab49204a3302e0201033029a1083106020100020101a20302"
+        "0120a30402020100a4053103020101a6053103020140bf83770205000420a61c6e247e25b3e6e69aa78eb0"
+        "3c2d4ac20d1f99a9a024a76f35c8e2cab9b68d04102560c70109ae67c030f00b98b512a670");
+
+auto wrapping_key = hex2str(
+        "308204be020100300d06092a864886f70d0101010500048204a8308204a40201000282010100aec367931d"
+        "8900ce56b0067f7d70e1fc653f3f34d194c1fed50018fb43db937b06e673a837313d56b1c725150a3fef86"
+        "acbddc41bb759c2854eae32d35841efb5c18d82bc90a1cb5c1d55adf245b02911f0b7cda88c421ff0ebafe"
+        "7c0d23be312d7bd5921ffaea1347c157406fef718f682643e4e5d33c6703d61c0cf7ac0bf4645c11f5c137"
+        "4c3886427411c449796792e0bef75dec858a2123c36753e02a95a96d7c454b504de385a642e0dfc3e60ac3"
+        "a7ee4991d0d48b0172a95f9536f02ba13cecccb92b727db5c27e5b2f5cec09600b286af5cf14c42024c61d"
+        "dfe71c2a8d7458f185234cb00e01d282f10f8fc6721d2aed3f4833cca2bd8fa62821dd5502030100010282"
+        "0100431447b6251908112b1ee76f99f3711a52b6630960046c2de70de188d833f8b8b91e4d785caeeeaf4f"
+        "0f74414e2cda40641f7fe24f14c67a88959bdb27766df9e710b630a03adc683b5d2c43080e52bee71e9eae"
+        "b6de297a5fea1072070d181c822bccff087d63c940ba8a45f670feb29fb4484d1c95e6d2579ba02aae0a00"
+        "900c3ebf490e3d2cd7ee8d0e20c536e4dc5a5097272888cddd7e91f228b1c4d7474c55b8fcd618c4a957bb"
+        "ddd5ad7407cc312d8d98a5caf7e08f4a0d6b45bb41c652659d5a5ba05b663737a8696281865ba20fbdd7f8"
+        "51e6c56e8cbe0ddbbf24dc03b2d2cb4c3d540fb0af52e034a2d06698b128e5f101e3b51a34f8d8b4f86181"
+        "02818100de392e18d682c829266cc3454e1d6166242f32d9a1d10577753e904ea7d08bff841be5bac82a16"
+        "4c5970007047b8c517db8f8f84e37bd5988561bdf503d4dc2bdb38f885434ae42c355f725c9a60f91f0788"
+        "e1f1a97223b524b5357fdf72e2f696bab7d78e32bf92ba8e1864eab1229e91346130748a6e3c124f9149d7"
+        "1c743502818100c95387c0f9d35f137b57d0d65c397c5e21cc251e47008ed62a542409c8b6b6ac7f8967b3"
+        "863ca645fcce49582a9aa17349db6c4a95affdae0dae612e1afac99ed39a2d934c880440aed8832f984316"
+        "3a47f27f392199dc1202f9a0f9bd08308007cb1e4e7f58309366a7de25f7c3c9b880677c068e1be936e812"
+        "88815252a8a102818057ff8ca1895080b2cae486ef0adfd791fb0235c0b8b36cd6c136e52e4085f4ea5a06"
+        "3212a4f105a3764743e53281988aba073f6e0027298e1c4378556e0efca0e14ece1af76ad0b030f27af6f0"
+        "ab35fb73a060d8b1a0e142fa2647e93b32e36d8282ae0a4de50ab7afe85500a16f43a64719d6e2b9439823"
+        "719cd08bcd03178102818100ba73b0bb28e3f81e9bd1c568713b101241acc607976c4ddccc90e65b6556ca"
+        "31516058f92b6e09f3b160ff0e374ec40d78ae4d4979fde6ac06a1a400c61dd31254186af30b22c10582a8"
+        "a43e34fe949c5f3b9755bae7baa7b7b7a6bd03b38cef55c86885fc6c1978b9cee7ef33da507c9df6b9277c"
+        "ff1e6aaa5d57aca528466102818100c931617c77829dfb1270502be9195c8f2830885f57dba869536811e6"
+        "864236d0c4736a0008a145af36b8357a7c3d139966d04c4e00934ea1aede3bb6b8ec841dc95e3f579751e2"
+        "bfdfe27ae778983f959356210723287b0affcc9f727044d48c373f1babde0724fa17a4fd4da0902c7c9b9b"
+        "f27ba61be6ad02dfddda8f4e6822");
+
+string zero_masking_key =
+        hex2str("0000000000000000000000000000000000000000000000000000000000000000");
+string masking_key = hex2str("D796B02C370F1FA4CC0124F14EC8CBEBE987E825246265050F399A51FD477DFC");
+
+class ImportWrappedKeyTest : public KeyMintAidlTestBase {};
+
+TEST_P(ImportWrappedKeyTest, Success) {
+    auto wrapping_key_desc = AuthorizationSetBuilder()
+                                     .RsaEncryptionKey(2048, 65537)
+                                     .Digest(Digest::SHA_2_256)
+                                     .Padding(PaddingMode::RSA_OAEP)
+                                     .Authorization(TAG_PURPOSE, KeyPurpose::WRAP_KEY);
+
+    ASSERT_EQ(ErrorCode::OK,
+              ImportWrappedKey(wrapped_key, wrapping_key, wrapping_key_desc, zero_masking_key,
+                               AuthorizationSetBuilder()
+                                       .Digest(Digest::SHA_2_256)
+                                       .Padding(PaddingMode::RSA_OAEP)));
+
+    string message = "Hello World!";
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::PKCS7);
+    string ciphertext = EncryptMessage(message, params);
+    string plaintext = DecryptMessage(ciphertext, params);
+    EXPECT_EQ(message, plaintext);
+}
+
+TEST_P(ImportWrappedKeyTest, SuccessMasked) {
+    auto wrapping_key_desc = AuthorizationSetBuilder()
+                                     .RsaEncryptionKey(2048, 65537)
+                                     .Digest(Digest::SHA_2_256)
+                                     .Padding(PaddingMode::RSA_OAEP)
+                                     .Authorization(TAG_PURPOSE, KeyPurpose::WRAP_KEY);
+
+    ASSERT_EQ(ErrorCode::OK,
+              ImportWrappedKey(wrapped_key_masked, wrapping_key, wrapping_key_desc, masking_key,
+                               AuthorizationSetBuilder()
+                                       .Digest(Digest::SHA_2_256)
+                                       .Padding(PaddingMode::RSA_OAEP)));
+}
+
+TEST_P(ImportWrappedKeyTest, WrongMask) {
+    auto wrapping_key_desc = AuthorizationSetBuilder()
+                                     .RsaEncryptionKey(2048, 65537)
+                                     .Digest(Digest::SHA_2_256)
+                                     .Padding(PaddingMode::RSA_OAEP)
+                                     .Authorization(TAG_PURPOSE, KeyPurpose::WRAP_KEY);
+
+    ASSERT_EQ(
+            ErrorCode::VERIFICATION_FAILED,
+            ImportWrappedKey(wrapped_key_masked, wrapping_key, wrapping_key_desc, zero_masking_key,
+                             AuthorizationSetBuilder()
+                                     .Digest(Digest::SHA_2_256)
+                                     .Padding(PaddingMode::RSA_OAEP)));
+}
+
+TEST_P(ImportWrappedKeyTest, WrongPurpose) {
+    auto wrapping_key_desc = AuthorizationSetBuilder()
+                                     .RsaEncryptionKey(2048, 65537)
+                                     .Digest(Digest::SHA_2_256)
+                                     .Padding(PaddingMode::RSA_OAEP);
+
+    ASSERT_EQ(
+            ErrorCode::INCOMPATIBLE_PURPOSE,
+            ImportWrappedKey(wrapped_key_masked, wrapping_key, wrapping_key_desc, zero_masking_key,
+                             AuthorizationSetBuilder()
+                                     .Digest(Digest::SHA_2_256)
+                                     .Padding(PaddingMode::RSA_OAEP)));
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(ImportWrappedKeyTest);
+
+typedef KeyMintAidlTestBase EncryptionOperationsTest;
+
+/*
+ * EncryptionOperationsTest.RsaNoPaddingSuccess
+ *
+ * Verifies that raw RSA encryption works.
+ */
+TEST_P(EncryptionOperationsTest, RsaNoPaddingSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::NONE)));
+
+    string message = string(2048 / 8, 'a');
+    auto params = AuthorizationSetBuilder().Padding(PaddingMode::NONE);
+    string ciphertext1 = EncryptMessage(message, params);
+    EXPECT_EQ(2048U / 8, ciphertext1.size());
+
+    string ciphertext2 = EncryptMessage(message, params);
+    EXPECT_EQ(2048U / 8, ciphertext2.size());
+
+    // Unpadded RSA is deterministic
+    EXPECT_EQ(ciphertext1, ciphertext2);
+}
+
+/*
+ * EncryptionOperationsTest.RsaNoPaddingShortMessage
+ *
+ * Verifies that raw RSA encryption of short messages works.
+ */
+TEST_P(EncryptionOperationsTest, RsaNoPaddingShortMessage) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::NONE)));
+
+    string message = "1";
+    auto params = AuthorizationSetBuilder().Padding(PaddingMode::NONE);
+
+    string ciphertext = EncryptMessage(message, params);
+    EXPECT_EQ(2048U / 8, ciphertext.size());
+
+    string expected_plaintext = string(2048U / 8 - 1, 0) + message;
+    string plaintext = DecryptMessage(ciphertext, params);
+
+    EXPECT_EQ(expected_plaintext, plaintext);
+
+    // Degenerate case, encrypting a numeric 1 yields 0x00..01 as the ciphertext.
+    message = static_cast<char>(1);
+    ciphertext = EncryptMessage(message, params);
+    EXPECT_EQ(2048U / 8, ciphertext.size());
+    EXPECT_EQ(ciphertext, string(2048U / 8 - 1, 0) + message);
+}
+
+/*
+ * EncryptionOperationsTest.RsaNoPaddingTooLong
+ *
+ * Verifies that raw RSA encryption of too-long messages fails in the expected way.
+ */
+TEST_P(EncryptionOperationsTest, RsaNoPaddingTooLong) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::NONE)));
+
+    string message(2048 / 8 + 1, 'a');
+
+    auto params = AuthorizationSetBuilder().Padding(PaddingMode::NONE);
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params));
+
+    string result;
+    EXPECT_EQ(ErrorCode::INVALID_INPUT_LENGTH, Finish(message, &result));
+}
+
+/*
+ * EncryptionOperationsTest.RsaNoPaddingTooLarge
+ *
+ * Verifies that raw RSA encryption of too-large (numerically) messages fails in the expected
+ * way.
+ */
+// TODO(seleneh) add RsaNoPaddingTooLarge test back after decided and implemented new
+// version of ExportKey inside generateKey
+
+/*
+ * EncryptionOperationsTest.RsaOaepSuccess
+ *
+ * Verifies that RSA-OAEP encryption operations work, with all digests.
+ */
+TEST_P(EncryptionOperationsTest, RsaOaepSuccess) {
+    auto digests = ValidDigests(false /* withNone */, true /* withMD5 */);
+
+    size_t key_size = 2048;  // Need largish key for SHA-512 test.
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(key_size, 65537)
+                                                 .Padding(PaddingMode::RSA_OAEP)
+                                                 .Digest(digests)));
+
+    string message = "Hello";
+
+    for (auto digest : digests) {
+        auto params = AuthorizationSetBuilder().Digest(digest).Padding(PaddingMode::RSA_OAEP);
+        string ciphertext1 = EncryptMessage(message, params);
+        if (HasNonfatalFailure()) std::cout << "-->" << digest << std::endl;
+        EXPECT_EQ(key_size / 8, ciphertext1.size());
+
+        string ciphertext2 = EncryptMessage(message, params);
+        EXPECT_EQ(key_size / 8, ciphertext2.size());
+
+        // OAEP randomizes padding so every result should be different (with astronomically high
+        // probability).
+        EXPECT_NE(ciphertext1, ciphertext2);
+
+        string plaintext1 = DecryptMessage(ciphertext1, params);
+        EXPECT_EQ(message, plaintext1) << "RSA-OAEP failed with digest " << digest;
+        string plaintext2 = DecryptMessage(ciphertext2, params);
+        EXPECT_EQ(message, plaintext2) << "RSA-OAEP failed with digest " << digest;
+
+        // Decrypting corrupted ciphertext should fail.
+        size_t offset_to_corrupt = random() % ciphertext1.size();
+        char corrupt_byte;
+        do {
+            corrupt_byte = static_cast<char>(random() % 256);
+        } while (corrupt_byte == ciphertext1[offset_to_corrupt]);
+        ciphertext1[offset_to_corrupt] = corrupt_byte;
+
+        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+        string result;
+        EXPECT_EQ(ErrorCode::UNKNOWN_ERROR, Finish(ciphertext1, &result));
+        EXPECT_EQ(0U, result.size());
+    }
+}
+
+/*
+ * EncryptionOperationsTest.RsaOaepInvalidDigest
+ *
+ * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to operate
+ * without a digest.
+ */
+TEST_P(EncryptionOperationsTest, RsaOaepInvalidDigest) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::RSA_OAEP)
+                                                 .Digest(Digest::NONE)));
+    string message = "Hello World!";
+
+    auto params = AuthorizationSetBuilder().Padding(PaddingMode::RSA_OAEP).Digest(Digest::NONE);
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_DIGEST, Begin(KeyPurpose::ENCRYPT, params));
+}
+
+/*
+ * EncryptionOperationsTest.RsaOaepInvalidDigest
+ *
+ * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to decrypt
+ * with a different digest than was used to encrypt.
+ */
+TEST_P(EncryptionOperationsTest, RsaOaepDecryptWithWrongDigest) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(1024, 65537)
+                                                 .Padding(PaddingMode::RSA_OAEP)
+                                                 .Digest(Digest::SHA_2_224, Digest::SHA_2_256)));
+    string message = "Hello World!";
+    string ciphertext = EncryptMessage(
+            message,
+            AuthorizationSetBuilder().Digest(Digest::SHA_2_224).Padding(PaddingMode::RSA_OAEP));
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, AuthorizationSetBuilder()
+                                                                .Digest(Digest::SHA_2_256)
+                                                                .Padding(PaddingMode::RSA_OAEP)));
+    string result;
+    EXPECT_EQ(ErrorCode::UNKNOWN_ERROR, Finish(ciphertext, &result));
+    EXPECT_EQ(0U, result.size());
+}
+
+/*
+ * EncryptionOperationsTest.RsaOaepTooLarge
+ *
+ * Verifies that RSA-OAEP encryption operations fail in the correct way when asked to encrypt a
+ * too-large message.
+ */
+TEST_P(EncryptionOperationsTest, RsaOaepTooLarge) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::RSA_OAEP)
+                                                 .Digest(Digest::SHA_2_256)));
+    constexpr size_t digest_size = 256 /* SHA_2_256 */ / 8;
+    constexpr size_t oaep_overhead = 2 * digest_size + 2;
+    string message(2048 / 8 - oaep_overhead + 1, 'a');
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, AuthorizationSetBuilder()
+                                                                .Padding(PaddingMode::RSA_OAEP)
+                                                                .Digest(Digest::SHA_2_256)));
+    string result;
+    ErrorCode error = Finish(message, &result);
+    EXPECT_TRUE(error == ErrorCode::INVALID_INPUT_LENGTH || error == ErrorCode::INVALID_ARGUMENT);
+    EXPECT_EQ(0U, result.size());
+}
+
+/*
+ * EncryptionOperationsTest.RsaPkcs1Success
+ *
+ * Verifies that RSA PKCS encryption/decrypts works.
+ */
+TEST_P(EncryptionOperationsTest, RsaPkcs1Success) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::RSA_PKCS1_1_5_ENCRYPT)));
+
+    string message = "Hello World!";
+    auto params = AuthorizationSetBuilder().Padding(PaddingMode::RSA_PKCS1_1_5_ENCRYPT);
+    string ciphertext1 = EncryptMessage(message, params);
+    EXPECT_EQ(2048U / 8, ciphertext1.size());
+
+    string ciphertext2 = EncryptMessage(message, params);
+    EXPECT_EQ(2048U / 8, ciphertext2.size());
+
+    // PKCS1 v1.5 randomizes padding so every result should be different.
+    EXPECT_NE(ciphertext1, ciphertext2);
+
+    string plaintext = DecryptMessage(ciphertext1, params);
+    EXPECT_EQ(message, plaintext);
+
+    // Decrypting corrupted ciphertext should fail.
+    size_t offset_to_corrupt = random() % ciphertext1.size();
+    char corrupt_byte;
+    do {
+        corrupt_byte = static_cast<char>(random() % 256);
+    } while (corrupt_byte == ciphertext1[offset_to_corrupt]);
+    ciphertext1[offset_to_corrupt] = corrupt_byte;
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+    string result;
+    EXPECT_EQ(ErrorCode::UNKNOWN_ERROR, Finish(ciphertext1, &result));
+    EXPECT_EQ(0U, result.size());
+}
+
+/*
+ * EncryptionOperationsTest.RsaPkcs1TooLarge
+ *
+ * Verifies that RSA PKCS encryption fails in the correct way when the mssage is too large.
+ */
+TEST_P(EncryptionOperationsTest, RsaPkcs1TooLarge) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::RSA_PKCS1_1_5_ENCRYPT)));
+    string message(2048 / 8 - 10, 'a');
+
+    auto params = AuthorizationSetBuilder().Padding(PaddingMode::RSA_PKCS1_1_5_ENCRYPT);
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params));
+    string result;
+    ErrorCode error = Finish(message, &result);
+    EXPECT_TRUE(error == ErrorCode::INVALID_INPUT_LENGTH || error == ErrorCode::INVALID_ARGUMENT);
+    EXPECT_EQ(0U, result.size());
+}
+
+/*
+ * EncryptionOperationsTest.EcdsaEncrypt
+ *
+ * Verifies that attempting to use ECDSA keys to encrypt fails in the correct way.
+ */
+TEST_P(EncryptionOperationsTest, EcdsaEncrypt) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .EcdsaSigningKey(256)
+                                                 .Digest(Digest::NONE)));
+    auto params = AuthorizationSetBuilder().Digest(Digest::NONE);
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_PURPOSE, Begin(KeyPurpose::ENCRYPT, params));
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_PURPOSE, Begin(KeyPurpose::DECRYPT, params));
+}
+
+/*
+ * EncryptionOperationsTest.HmacEncrypt
+ *
+ * Verifies that attempting to use HMAC keys to encrypt fails in the correct way.
+ */
+TEST_P(EncryptionOperationsTest, HmacEncrypt) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .HmacKey(128)
+                                                 .Digest(Digest::SHA_2_256)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+    auto params = AuthorizationSetBuilder()
+                          .Digest(Digest::SHA_2_256)
+                          .Padding(PaddingMode::NONE)
+                          .Authorization(TAG_MAC_LENGTH, 128);
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_PURPOSE, Begin(KeyPurpose::ENCRYPT, params));
+    ASSERT_EQ(ErrorCode::UNSUPPORTED_PURPOSE, Begin(KeyPurpose::DECRYPT, params));
+}
+
+/*
+ * EncryptionOperationsTest.AesEcbRoundTripSuccess
+ *
+ * Verifies that AES ECB mode works.
+ */
+TEST_P(EncryptionOperationsTest, AesEcbRoundTripSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::ECB)
+                                                 .Padding(PaddingMode::NONE)));
+
+    ASSERT_GT(key_blob_.size(), 0U);
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::NONE);
+
+    // Two-block message.
+    string message = "12345678901234567890123456789012";
+    string ciphertext1 = EncryptMessage(message, params);
+    EXPECT_EQ(message.size(), ciphertext1.size());
+
+    string ciphertext2 = EncryptMessage(string(message), params);
+    EXPECT_EQ(message.size(), ciphertext2.size());
+
+    // ECB is deterministic.
+    EXPECT_EQ(ciphertext1, ciphertext2);
+
+    string plaintext = DecryptMessage(ciphertext1, params);
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesEcbRoundTripSuccess
+ *
+ * Verifies that AES encryption fails in the correct way when an unauthorized mode is specified.
+ */
+TEST_P(EncryptionOperationsTest, AesWrongMode) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::CBC)
+                                                 .Padding(PaddingMode::NONE)));
+
+    ASSERT_GT(key_blob_.size(), 0U);
+
+    // Two-block message.
+    string message = "12345678901234567890123456789012";
+    EXPECT_EQ(
+            ErrorCode::INCOMPATIBLE_BLOCK_MODE,
+            Begin(KeyPurpose::ENCRYPT,
+                  AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::NONE)));
+}
+
+/*
+ * EncryptionOperationsTest.AesWrongPurpose
+ *
+ * Verifies that AES encryption fails in the correct way when an unauthorized purpose is
+ * specified.
+ */
+TEST_P(EncryptionOperationsTest, AesWrongPurpose) {
+    auto err = GenerateKey(AuthorizationSetBuilder()
+                                   .Authorization(TAG_NO_AUTH_REQUIRED)
+                                   .AesKey(128)
+                                   .Authorization(TAG_PURPOSE, KeyPurpose::ENCRYPT)
+                                   .Authorization(TAG_BLOCK_MODE, BlockMode::GCM)
+                                   .Authorization(TAG_MIN_MAC_LENGTH, 128)
+                                   .Padding(PaddingMode::NONE));
+    ASSERT_EQ(ErrorCode::OK, err) << "Got " << err;
+    ASSERT_GT(key_blob_.size(), 0U);
+
+    err = Begin(KeyPurpose::DECRYPT, AuthorizationSetBuilder()
+                                             .BlockMode(BlockMode::GCM)
+                                             .Padding(PaddingMode::NONE)
+                                             .Authorization(TAG_MAC_LENGTH, 128));
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_PURPOSE, err) << "Got " << err;
+
+    CheckedDeleteKey();
+
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesKey(128)
+                                                 .Authorization(TAG_PURPOSE, KeyPurpose::DECRYPT)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::GCM)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)
+                                                 .Padding(PaddingMode::NONE)));
+
+    err = Begin(KeyPurpose::ENCRYPT, AuthorizationSetBuilder()
+                                             .BlockMode(BlockMode::GCM)
+                                             .Padding(PaddingMode::NONE)
+                                             .Authorization(TAG_MAC_LENGTH, 128));
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_PURPOSE, err) << "Got " << err;
+}
+
+/*
+ * EncryptionOperationsTest.AesEcbNoPaddingWrongInputSize
+ *
+ * Verifies that AES encryption fails in the correct way when provided an input that is not a
+ * multiple of the block size and no padding is specified.
+ */
+TEST_P(EncryptionOperationsTest, AesEcbNoPaddingWrongInputSize) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::ECB)
+                                                 .Padding(PaddingMode::NONE)));
+    // Message is slightly shorter than two blocks.
+    string message(16 * 2 - 1, 'a');
+
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::NONE);
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params));
+    string ciphertext;
+    EXPECT_EQ(ErrorCode::INVALID_INPUT_LENGTH, Finish(message, &ciphertext));
+    EXPECT_EQ(0U, ciphertext.size());
+}
+
+/*
+ * EncryptionOperationsTest.AesEcbPkcs7Padding
+ *
+ * Verifies that AES PKCS7 padding works for any message length.
+ */
+TEST_P(EncryptionOperationsTest, AesEcbPkcs7Padding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::ECB)
+                                                 .Padding(PaddingMode::PKCS7)));
+
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::PKCS7);
+
+    // Try various message lengths; all should work.
+    for (size_t i = 0; i < 32; ++i) {
+        string message(i, 'a');
+        string ciphertext = EncryptMessage(message, params);
+        EXPECT_EQ(i + 16 - (i % 16), ciphertext.size());
+        string plaintext = DecryptMessage(ciphertext, params);
+        EXPECT_EQ(message, plaintext);
+    }
+}
+
+/*
+ * EncryptionOperationsTest.AesEcbWrongPadding
+ *
+ * Verifies that AES enryption fails in the correct way when an unauthorized padding mode is
+ * specified.
+ */
+TEST_P(EncryptionOperationsTest, AesEcbWrongPadding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::ECB)
+                                                 .Padding(PaddingMode::NONE)));
+
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::PKCS7);
+
+    // Try various message lengths; all should fail
+    for (size_t i = 0; i < 32; ++i) {
+        string message(i, 'a');
+        EXPECT_EQ(ErrorCode::INCOMPATIBLE_PADDING_MODE, Begin(KeyPurpose::ENCRYPT, params));
+    }
+}
+
+/*
+ * EncryptionOperationsTest.AesEcbPkcs7PaddingCorrupted
+ *
+ * Verifies that AES decryption fails in the correct way when the padding is corrupted.
+ */
+TEST_P(EncryptionOperationsTest, AesEcbPkcs7PaddingCorrupted) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::ECB)
+                                                 .Padding(PaddingMode::PKCS7)));
+
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::PKCS7);
+
+    string message = "a";
+    string ciphertext = EncryptMessage(message, params);
+    EXPECT_EQ(16U, ciphertext.size());
+    EXPECT_NE(ciphertext, message);
+    ++ciphertext[ciphertext.size() / 2];
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+    string plaintext;
+    EXPECT_EQ(ErrorCode::INVALID_INPUT_LENGTH, Finish(message, &plaintext));
+}
+
+vector<uint8_t> CopyIv(const AuthorizationSet& set) {
+    auto iv = set.GetTagValue(TAG_NONCE);
+    EXPECT_TRUE(iv.isOk());
+    return iv.value();
+}
+
+/*
+ * EncryptionOperationsTest.AesCtrRoundTripSuccess
+ *
+ * Verifies that AES CTR mode works.
+ */
+TEST_P(EncryptionOperationsTest, AesCtrRoundTripSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::CTR)
+                                                 .Padding(PaddingMode::NONE)));
+
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::CTR).Padding(PaddingMode::NONE);
+
+    string message = "123";
+    AuthorizationSet out_params;
+    string ciphertext1 = EncryptMessage(message, params, &out_params);
+    vector<uint8_t> iv1 = CopyIv(out_params);
+    EXPECT_EQ(16U, iv1.size());
+
+    EXPECT_EQ(message.size(), ciphertext1.size());
+
+    out_params.Clear();
+    string ciphertext2 = EncryptMessage(message, params, &out_params);
+    vector<uint8_t> iv2 = CopyIv(out_params);
+    EXPECT_EQ(16U, iv2.size());
+
+    // IVs should be random, so ciphertexts should differ.
+    EXPECT_NE(ciphertext1, ciphertext2);
+
+    auto params_iv1 =
+            AuthorizationSetBuilder().Authorizations(params).Authorization(TAG_NONCE, iv1);
+    auto params_iv2 =
+            AuthorizationSetBuilder().Authorizations(params).Authorization(TAG_NONCE, iv2);
+
+    string plaintext = DecryptMessage(ciphertext1, params_iv1);
+    EXPECT_EQ(message, plaintext);
+    plaintext = DecryptMessage(ciphertext2, params_iv2);
+    EXPECT_EQ(message, plaintext);
+
+    // Using the wrong IV will result in a "valid" decryption, but the data will be garbage.
+    plaintext = DecryptMessage(ciphertext1, params_iv2);
+    EXPECT_NE(message, plaintext);
+    plaintext = DecryptMessage(ciphertext2, params_iv1);
+    EXPECT_NE(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesIncremental
+ *
+ * Verifies that AES works, all modes, when provided data in various size increments.
+ */
+TEST_P(EncryptionOperationsTest, AesIncremental) {
+    auto block_modes = {
+            BlockMode::ECB,
+            BlockMode::CBC,
+            BlockMode::CTR,
+            BlockMode::GCM,
+    };
+
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(block_modes)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    for (int increment = 1; increment <= 240; ++increment) {
+        for (auto block_mode : block_modes) {
+            string message(240, 'a');
+            auto params = AuthorizationSetBuilder()
+                                  .BlockMode(block_mode)
+                                  .Padding(PaddingMode::NONE)
+                                  .Authorization(TAG_MAC_LENGTH, 128) /* for GCM */;
+
+            AuthorizationSet output_params;
+            EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &output_params));
+
+            string ciphertext;
+            int32_t input_consumed;
+            string to_send;
+            for (size_t i = 0; i < message.size(); i += increment) {
+                to_send.append(message.substr(i, increment));
+                EXPECT_EQ(ErrorCode::OK, Update(to_send, &ciphertext, &input_consumed));
+                EXPECT_EQ(to_send.length(), input_consumed);
+                to_send = to_send.substr(input_consumed);
+                EXPECT_EQ(0U, to_send.length());
+
+                switch (block_mode) {
+                    case BlockMode::ECB:
+                    case BlockMode::CBC:
+                        // Implementations must take as many blocks as possible, leaving less
+                        // than a block.
+                        EXPECT_LE(to_send.length(), 16U);
+                        break;
+                    case BlockMode::GCM:
+                    case BlockMode::CTR:
+                        // Implementations must always take all the data.
+                        EXPECT_EQ(0U, to_send.length());
+                        break;
+                }
+            }
+            EXPECT_EQ(ErrorCode::OK, Finish(to_send, &ciphertext)) << "Error sending " << to_send;
+
+            switch (block_mode) {
+                case BlockMode::GCM:
+                    EXPECT_EQ(message.size() + 16, ciphertext.size());
+                    break;
+                case BlockMode::CTR:
+                    EXPECT_EQ(message.size(), ciphertext.size());
+                    break;
+                case BlockMode::CBC:
+                case BlockMode::ECB:
+                    EXPECT_EQ(message.size() + message.size() % 16, ciphertext.size());
+                    break;
+            }
+
+            auto iv = output_params.GetTagValue(TAG_NONCE);
+            switch (block_mode) {
+                case BlockMode::CBC:
+                case BlockMode::GCM:
+                case BlockMode::CTR:
+                    ASSERT_TRUE(iv.isOk()) << "No IV for block mode " << block_mode;
+                    EXPECT_EQ(block_mode == BlockMode::GCM ? 12U : 16U, iv.value().size());
+                    params.push_back(TAG_NONCE, iv.value());
+                    break;
+
+                case BlockMode::ECB:
+                    EXPECT_FALSE(iv.isOk()) << "ECB mode should not generate IV";
+                    break;
+            }
+
+            EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params))
+                    << "Decrypt begin() failed for block mode " << block_mode;
+
+            string plaintext;
+            for (size_t i = 0; i < ciphertext.size(); i += increment) {
+                to_send.append(ciphertext.substr(i, increment));
+                EXPECT_EQ(ErrorCode::OK, Update(to_send, &plaintext, &input_consumed));
+                to_send = to_send.substr(input_consumed);
+            }
+            ErrorCode error = Finish(to_send, &plaintext);
+            ASSERT_EQ(ErrorCode::OK, error) << "Decryption failed for block mode " << block_mode
+                                            << " and increment " << increment;
+            if (error == ErrorCode::OK) {
+                ASSERT_EQ(message, plaintext) << "Decryption didn't match for block mode "
+                                              << block_mode << " and increment " << increment;
+            }
+        }
+    }
+}
+
+struct AesCtrSp80038aTestVector {
+    const char* key;
+    const char* nonce;
+    const char* plaintext;
+    const char* ciphertext;
+};
+
+// These test vectors are taken from
+// http://csrc.nist.gov/publications/nistpubs/800-38a/sp800-38a.pdf, section F.5.
+static const AesCtrSp80038aTestVector kAesCtrSp80038aTestVectors[] = {
+        // AES-128
+        {
+                "2b7e151628aed2a6abf7158809cf4f3c",
+                "f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff",
+                "6bc1bee22e409f96e93d7e117393172aae2d8a571e03ac9c9eb76fac45af8e51"
+                "30c81c46a35ce411e5fbc1191a0a52eff69f2445df4f9b17ad2b417be66c3710",
+                "874d6191b620e3261bef6864990db6ce9806f66b7970fdff8617187bb9fffdff"
+                "5ae4df3edbd5d35e5b4f09020db03eab1e031dda2fbe03d1792170a0f3009cee",
+        },
+        // AES-192
+        {
+                "8e73b0f7da0e6452c810f32b809079e562f8ead2522c6b7b",
+                "f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff",
+                "6bc1bee22e409f96e93d7e117393172aae2d8a571e03ac9c9eb76fac45af8e51"
+                "30c81c46a35ce411e5fbc1191a0a52eff69f2445df4f9b17ad2b417be66c3710",
+                "1abc932417521ca24f2b0459fe7e6e0b090339ec0aa6faefd5ccc2c6f4ce8e94"
+                "1e36b26bd1ebc670d1bd1d665620abf74f78a7f6d29809585a97daec58c6b050",
+        },
+        // AES-256
+        {
+                "603deb1015ca71be2b73aef0857d77811f352c073b6108d72d9810a30914dff4",
+                "f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff",
+                "6bc1bee22e409f96e93d7e117393172aae2d8a571e03ac9c9eb76fac45af8e51"
+                "30c81c46a35ce411e5fbc1191a0a52eff69f2445df4f9b17ad2b417be66c3710",
+                "601ec313775789a5b7a7f504bbf3d228f443e3ca4d62b59aca84e990cacaf5c5"
+                "2b0930daa23de94ce87017ba2d84988ddfc9c58db67aada613c2dd08457941a6",
+        },
+};
+
+/*
+ * EncryptionOperationsTest.AesCtrSp80038aTestVector
+ *
+ * Verifies AES CTR implementation against SP800-38A test vectors.
+ */
+TEST_P(EncryptionOperationsTest, AesCtrSp80038aTestVector) {
+    std::vector<uint32_t> InvalidSizes = InvalidKeySizes(Algorithm::AES);
+    for (size_t i = 0; i < 3; i++) {
+        const AesCtrSp80038aTestVector& test(kAesCtrSp80038aTestVectors[i]);
+        const string key = hex2str(test.key);
+        if (std::find(InvalidSizes.begin(), InvalidSizes.end(), (key.size() * 8)) !=
+            InvalidSizes.end())
+            continue;
+        const string nonce = hex2str(test.nonce);
+        const string plaintext = hex2str(test.plaintext);
+        const string ciphertext = hex2str(test.ciphertext);
+        CheckAesCtrTestVector(key, nonce, plaintext, ciphertext);
+    }
+}
+
+/*
+ * EncryptionOperationsTest.AesCtrIncompatiblePaddingMode
+ *
+ * Verifies that keymint rejects use of CTR mode with PKCS7 padding in the correct way.
+ */
+TEST_P(EncryptionOperationsTest, AesCtrIncompatiblePaddingMode) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::CTR)
+                                                 .Padding(PaddingMode::PKCS7)));
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::CTR).Padding(PaddingMode::NONE);
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_PADDING_MODE, Begin(KeyPurpose::ENCRYPT, params));
+}
+
+/*
+ * EncryptionOperationsTest.AesCtrInvalidCallerNonce
+ *
+ * Verifies that keymint fails correctly when the user supplies an incorrect-size nonce.
+ */
+TEST_P(EncryptionOperationsTest, AesCtrInvalidCallerNonce) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::CTR)
+                                                 .Authorization(TAG_CALLER_NONCE)
+                                                 .Padding(PaddingMode::NONE)));
+
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(BlockMode::CTR)
+                          .Padding(PaddingMode::NONE)
+                          .Authorization(TAG_NONCE, AidlBuf(string(1, 'a')));
+    EXPECT_EQ(ErrorCode::INVALID_NONCE, Begin(KeyPurpose::ENCRYPT, params));
+
+    params = AuthorizationSetBuilder()
+                     .BlockMode(BlockMode::CTR)
+                     .Padding(PaddingMode::NONE)
+                     .Authorization(TAG_NONCE, AidlBuf(string(15, 'a')));
+    EXPECT_EQ(ErrorCode::INVALID_NONCE, Begin(KeyPurpose::ENCRYPT, params));
+
+    params = AuthorizationSetBuilder()
+                     .BlockMode(BlockMode::CTR)
+                     .Padding(PaddingMode::NONE)
+                     .Authorization(TAG_NONCE, AidlBuf(string(17, 'a')));
+    EXPECT_EQ(ErrorCode::INVALID_NONCE, Begin(KeyPurpose::ENCRYPT, params));
+}
+
+/*
+ * EncryptionOperationsTest.AesCtrInvalidCallerNonce
+ *
+ * Verifies that keymint fails correctly when the user supplies an incorrect-size nonce.
+ */
+TEST_P(EncryptionOperationsTest, AesCbcRoundTripSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::CBC)
+                                                 .Padding(PaddingMode::NONE)));
+    // Two-block message.
+    string message = "12345678901234567890123456789012";
+    auto params = AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::NONE);
+    AuthorizationSet out_params;
+    string ciphertext1 = EncryptMessage(message, params, &out_params);
+    vector<uint8_t> iv1 = CopyIv(out_params);
+    EXPECT_EQ(message.size(), ciphertext1.size());
+
+    out_params.Clear();
+
+    string ciphertext2 = EncryptMessage(message, params, &out_params);
+    vector<uint8_t> iv2 = CopyIv(out_params);
+    EXPECT_EQ(message.size(), ciphertext2.size());
+
+    // IVs should be random, so ciphertexts should differ.
+    EXPECT_NE(ciphertext1, ciphertext2);
+
+    params.push_back(TAG_NONCE, iv1);
+    string plaintext = DecryptMessage(ciphertext1, params);
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesCallerNonce
+ *
+ * Verifies that AES caller-provided nonces work correctly.
+ */
+TEST_P(EncryptionOperationsTest, AesCallerNonce) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::CBC)
+                                                 .Authorization(TAG_CALLER_NONCE)
+                                                 .Padding(PaddingMode::NONE)));
+
+    string message = "12345678901234567890123456789012";
+
+    // Don't specify nonce, should get a random one.
+    AuthorizationSetBuilder params =
+            AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::NONE);
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(message, params, &out_params);
+    EXPECT_EQ(message.size(), ciphertext.size());
+    EXPECT_EQ(16U, out_params.GetTagValue(TAG_NONCE).value().size());
+
+    params.push_back(TAG_NONCE, out_params.GetTagValue(TAG_NONCE).value());
+    string plaintext = DecryptMessage(ciphertext, params);
+    EXPECT_EQ(message, plaintext);
+
+    // Now specify a nonce, should also work.
+    params = AuthorizationSetBuilder()
+                     .BlockMode(BlockMode::CBC)
+                     .Padding(PaddingMode::NONE)
+                     .Authorization(TAG_NONCE, AidlBuf("abcdefghijklmnop"));
+    out_params.Clear();
+    ciphertext = EncryptMessage(message, params, &out_params);
+
+    // Decrypt with correct nonce.
+    plaintext = DecryptMessage(ciphertext, params);
+    EXPECT_EQ(message, plaintext);
+
+    // Try with wrong nonce.
+    params = AuthorizationSetBuilder()
+                     .BlockMode(BlockMode::CBC)
+                     .Padding(PaddingMode::NONE)
+                     .Authorization(TAG_NONCE, AidlBuf("aaaaaaaaaaaaaaaa"));
+    plaintext = DecryptMessage(ciphertext, params);
+    EXPECT_NE(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesCallerNonceProhibited
+ *
+ * Verifies that caller-provided nonces are not permitted when not specified in the key
+ * authorizations.
+ */
+TEST_P(EncryptionOperationsTest, AesCallerNonceProhibited) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::CBC)
+                                                 .Padding(PaddingMode::NONE)));
+
+    string message = "12345678901234567890123456789012";
+
+    // Don't specify nonce, should get a random one.
+    AuthorizationSetBuilder params =
+            AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::NONE);
+    AuthorizationSet out_params;
+    string ciphertext = EncryptMessage(message, params, &out_params);
+    EXPECT_EQ(message.size(), ciphertext.size());
+    EXPECT_EQ(16U, out_params.GetTagValue(TAG_NONCE).value().size());
+
+    params.push_back(TAG_NONCE, out_params.GetTagValue(TAG_NONCE).value());
+    string plaintext = DecryptMessage(ciphertext, params);
+    EXPECT_EQ(message, plaintext);
+
+    // Now specify a nonce, should fail
+    params = AuthorizationSetBuilder()
+                     .BlockMode(BlockMode::CBC)
+                     .Padding(PaddingMode::NONE)
+                     .Authorization(TAG_NONCE, AidlBuf("abcdefghijklmnop"));
+    out_params.Clear();
+    EXPECT_EQ(ErrorCode::CALLER_NONCE_PROHIBITED, Begin(KeyPurpose::ENCRYPT, params, &out_params));
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmRoundTripSuccess
+ *
+ * Verifies that AES GCM mode works.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmRoundTripSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string aad = "foobar";
+    string message = "123456789012345678901234567890123456";
+
+    auto begin_params = AuthorizationSetBuilder()
+                                .BlockMode(BlockMode::GCM)
+                                .Padding(PaddingMode::NONE)
+                                .Authorization(TAG_MAC_LENGTH, 128);
+
+    auto update_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, aad.data(), aad.size());
+
+    // Encrypt
+    AuthorizationSet begin_out_params;
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params))
+            << "Begin encrypt";
+    string ciphertext;
+    AuthorizationSet update_out_params;
+    ASSERT_EQ(ErrorCode::OK, Finish(update_params, message, "", &update_out_params, &ciphertext));
+
+    ASSERT_EQ(ciphertext.length(), message.length() + 16);
+
+    // Grab nonce
+    begin_params.push_back(begin_out_params);
+
+    // Decrypt.
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params)) << "Begin decrypt";
+    string plaintext;
+    int32_t input_consumed;
+    ASSERT_EQ(ErrorCode::OK,
+              Update(update_params, ciphertext, &update_out_params, &plaintext, &input_consumed));
+    EXPECT_EQ(ciphertext.size(), input_consumed);
+    EXPECT_EQ(ErrorCode::OK, Finish("", &plaintext));
+    EXPECT_EQ(message.length(), plaintext.length());
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmRoundTripWithDelaySuccess
+ *
+ * Verifies that AES GCM mode works, even when there's a long delay
+ * between operations.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmRoundTripWithDelaySuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string aad = "foobar";
+    string message = "123456789012345678901234567890123456";
+
+    auto begin_params = AuthorizationSetBuilder()
+                                .BlockMode(BlockMode::GCM)
+                                .Padding(PaddingMode::NONE)
+                                .Authorization(TAG_MAC_LENGTH, 128);
+
+    auto update_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, aad.data(), aad.size());
+
+    // Encrypt
+    AuthorizationSet begin_out_params;
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params))
+            << "Begin encrypt";
+    string ciphertext;
+    AuthorizationSet update_out_params;
+    sleep(5);
+    ASSERT_EQ(ErrorCode::OK, Finish(update_params, message, "", &update_out_params, &ciphertext));
+
+    ASSERT_EQ(ciphertext.length(), message.length() + 16);
+
+    // Grab nonce
+    begin_params.push_back(begin_out_params);
+
+    // Decrypt.
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params)) << "Begin decrypt";
+    string plaintext;
+    int32_t input_consumed;
+    sleep(5);
+    ASSERT_EQ(ErrorCode::OK,
+              Update(update_params, ciphertext, &update_out_params, &plaintext, &input_consumed));
+    EXPECT_EQ(ciphertext.size(), input_consumed);
+    sleep(5);
+    EXPECT_EQ(ErrorCode::OK, Finish("", &plaintext));
+    EXPECT_EQ(message.length(), plaintext.length());
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmDifferentNonces
+ *
+ * Verifies that encrypting the same data with different nonces produces different outputs.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmDifferentNonces) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .Authorization(TAG_BLOCK_MODE, BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)
+                                                 .Authorization(TAG_CALLER_NONCE)));
+
+    string aad = "foobar";
+    string message = "123456789012345678901234567890123456";
+    string nonce1 = "000000000000";
+    string nonce2 = "111111111111";
+    string nonce3 = "222222222222";
+
+    string ciphertext1 =
+            EncryptMessage(message, BlockMode::GCM, PaddingMode::NONE, 128, AidlBuf(nonce1));
+    string ciphertext2 =
+            EncryptMessage(message, BlockMode::GCM, PaddingMode::NONE, 128, AidlBuf(nonce2));
+    string ciphertext3 =
+            EncryptMessage(message, BlockMode::GCM, PaddingMode::NONE, 128, AidlBuf(nonce3));
+
+    ASSERT_NE(ciphertext1, ciphertext2);
+    ASSERT_NE(ciphertext1, ciphertext3);
+    ASSERT_NE(ciphertext2, ciphertext3);
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmTooShortTag
+ *
+ * Verifies that AES GCM mode fails correctly when a too-short tag length is specified.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmTooShortTag) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+    string message = "123456789012345678901234567890123456";
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(BlockMode::GCM)
+                          .Padding(PaddingMode::NONE)
+                          .Authorization(TAG_MAC_LENGTH, 96);
+
+    EXPECT_EQ(ErrorCode::INVALID_MAC_LENGTH, Begin(KeyPurpose::ENCRYPT, params));
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmTooShortTagOnDecrypt
+ *
+ * Verifies that AES GCM mode fails correctly when a too-short tag is provided to decryption.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmTooShortTagOnDecrypt) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+    string aad = "foobar";
+    string message = "123456789012345678901234567890123456";
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(BlockMode::GCM)
+                          .Padding(PaddingMode::NONE)
+                          .Authorization(TAG_MAC_LENGTH, 128);
+
+    auto finish_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, aad.data(), aad.size());
+
+    // Encrypt
+    AuthorizationSet begin_out_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &begin_out_params));
+    EXPECT_EQ(1U, begin_out_params.size());
+    ASSERT_TRUE(begin_out_params.GetTagValue(TAG_NONCE).isOk());
+
+    AuthorizationSet finish_out_params;
+    string ciphertext;
+    EXPECT_EQ(ErrorCode::OK,
+              Finish(finish_params, message, "" /* signature */, &finish_out_params, &ciphertext));
+
+    params = AuthorizationSetBuilder()
+                     .Authorizations(begin_out_params)
+                     .BlockMode(BlockMode::GCM)
+                     .Padding(PaddingMode::NONE)
+                     .Authorization(TAG_MAC_LENGTH, 96);
+
+    // Decrypt.
+    EXPECT_EQ(ErrorCode::INVALID_MAC_LENGTH, Begin(KeyPurpose::DECRYPT, params));
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmCorruptKey
+ *
+ * Verifies that AES GCM mode fails correctly when the decryption key is incorrect.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmCorruptKey) {
+    const uint8_t nonce_bytes[] = {
+            0xb7, 0x94, 0x37, 0xae, 0x08, 0xff, 0x35, 0x5d, 0x7d, 0x8a, 0x4d, 0x0f,
+    };
+    string nonce = make_string(nonce_bytes);
+    const uint8_t ciphertext_bytes[] = {
+            0xb3, 0xf6, 0x79, 0x9e, 0x8f, 0x93, 0x26, 0xf2, 0xdf, 0x1e, 0x80, 0xfc,
+            0xd2, 0xcb, 0x16, 0xd7, 0x8c, 0x9d, 0xc7, 0xcc, 0x14, 0xbb, 0x67, 0x78,
+            0x62, 0xdc, 0x6c, 0x63, 0x9b, 0x3a, 0x63, 0x38, 0xd2, 0x4b, 0x31, 0x2d,
+            0x39, 0x89, 0xe5, 0x92, 0x0b, 0x5d, 0xbf, 0xc9, 0x76, 0x76, 0x5e, 0xfb,
+            0xfe, 0x57, 0xbb, 0x38, 0x59, 0x40, 0xa7, 0xa4, 0x3b, 0xdf, 0x05, 0xbd,
+            0xda, 0xe3, 0xc9, 0xd6, 0xa2, 0xfb, 0xbd, 0xfc, 0xc0, 0xcb, 0xa0,
+    };
+    string ciphertext = make_string(ciphertext_bytes);
+
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(BlockMode::GCM)
+                          .Padding(PaddingMode::NONE)
+                          .Authorization(TAG_MAC_LENGTH, 128)
+                          .Authorization(TAG_NONCE, nonce.data(), nonce.size());
+
+    auto import_params = AuthorizationSetBuilder()
+                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                 .AesEncryptionKey(128)
+                                 .BlockMode(BlockMode::GCM)
+                                 .Padding(PaddingMode::NONE)
+                                 .Authorization(TAG_CALLER_NONCE)
+                                 .Authorization(TAG_MIN_MAC_LENGTH, 128);
+
+    // Import correct key and decrypt
+    const uint8_t key_bytes[] = {
+            0xba, 0x76, 0x35, 0x4f, 0x0a, 0xed, 0x6e, 0x8d,
+            0x91, 0xf4, 0x5c, 0x4f, 0xf5, 0xa0, 0x62, 0xdb,
+    };
+    string key = make_string(key_bytes);
+    ASSERT_EQ(ErrorCode::OK, ImportKey(import_params, KeyFormat::RAW, key));
+    string plaintext = DecryptMessage(ciphertext, params);
+    CheckedDeleteKey();
+
+    // Corrupt key and attempt to decrypt
+    key[0] = 0;
+    ASSERT_EQ(ErrorCode::OK, ImportKey(import_params, KeyFormat::RAW, key));
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+    EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(ciphertext, &plaintext));
+    CheckedDeleteKey();
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmAadNoData
+ *
+ * Verifies that AES GCM mode works when provided additional authenticated data, but no data to
+ * encrypt.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmAadNoData) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string aad = "1234567890123456";
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(BlockMode::GCM)
+                          .Padding(PaddingMode::NONE)
+                          .Authorization(TAG_MAC_LENGTH, 128);
+
+    auto finish_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, aad.data(), aad.size());
+
+    // Encrypt
+    AuthorizationSet begin_out_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &begin_out_params));
+    string ciphertext;
+    AuthorizationSet finish_out_params;
+    EXPECT_EQ(ErrorCode::OK, Finish(finish_params, "" /* input */, "" /* signature */,
+                                    &finish_out_params, &ciphertext));
+    EXPECT_TRUE(finish_out_params.empty());
+
+    // Grab nonce
+    params.push_back(begin_out_params);
+
+    // Decrypt.
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+    string plaintext;
+    EXPECT_EQ(ErrorCode::OK, Finish(finish_params, ciphertext, "" /* signature */,
+                                    &finish_out_params, &plaintext));
+
+    EXPECT_TRUE(finish_out_params.empty());
+
+    EXPECT_EQ("", plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmMultiPartAad
+ *
+ * Verifies that AES GCM mode works when provided additional authenticated data in multiple
+ * chunks.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmMultiPartAad) {
+    const size_t tag_bits = 128;
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string message = "123456789012345678901234567890123456";
+    auto begin_params = AuthorizationSetBuilder()
+                                .BlockMode(BlockMode::GCM)
+                                .Padding(PaddingMode::NONE)
+                                .Authorization(TAG_MAC_LENGTH, tag_bits);
+    AuthorizationSet begin_out_params;
+
+    auto update_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, "foo", (size_t)3);
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+
+    // No data, AAD only.
+    string ciphertext;
+    int32_t input_consumed;
+    AuthorizationSet update_out_params;
+    EXPECT_EQ(ErrorCode::OK, Update(update_params, "" /* input */, &update_out_params, &ciphertext,
+                                    &input_consumed));
+    EXPECT_EQ(0U, input_consumed);
+    EXPECT_EQ(0U, ciphertext.size());
+    EXPECT_TRUE(update_out_params.empty());
+
+    // AAD and data.
+    EXPECT_EQ(ErrorCode::OK,
+              Update(update_params, message, &update_out_params, &ciphertext, &input_consumed));
+    EXPECT_EQ(message.size(), input_consumed);
+    EXPECT_TRUE(update_out_params.empty());
+
+    EXPECT_EQ(ErrorCode::OK, Finish("" /* input */, &ciphertext));
+    // Expect 128-bit (16-byte) tag appended to ciphertext.
+    EXPECT_EQ(message.size() + (tag_bits >> 3), ciphertext.size());
+
+    // Grab nonce.
+    begin_params.push_back(begin_out_params);
+
+    // Decrypt
+    update_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, "foofoo", (size_t)6);
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
+    string plaintext;
+    EXPECT_EQ(ErrorCode::OK, Finish(update_params, ciphertext, "" /* signature */,
+                                    &update_out_params, &plaintext));
+    EXPECT_TRUE(update_out_params.empty());
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmAadOutOfOrder
+ *
+ * Verifies that AES GCM mode fails correctly when given AAD after data to encipher.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmAadOutOfOrder) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string message = "123456789012345678901234567890123456";
+    auto begin_params = AuthorizationSetBuilder()
+                                .BlockMode(BlockMode::GCM)
+                                .Padding(PaddingMode::NONE)
+                                .Authorization(TAG_MAC_LENGTH, 128);
+    AuthorizationSet begin_out_params;
+
+    auto update_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, "foo", (size_t)3);
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+
+    // No data, AAD only.
+    string ciphertext;
+    int32_t input_consumed;
+    AuthorizationSet update_out_params;
+    EXPECT_EQ(ErrorCode::OK, Update(update_params, "" /* input */, &update_out_params, &ciphertext,
+                                    &input_consumed));
+    EXPECT_EQ(0U, input_consumed);
+    EXPECT_EQ(0U, ciphertext.size());
+    EXPECT_TRUE(update_out_params.empty());
+
+    // AAD and data.
+    EXPECT_EQ(ErrorCode::OK,
+              Update(update_params, message, &update_out_params, &ciphertext, &input_consumed));
+    EXPECT_EQ(message.size(), input_consumed);
+    EXPECT_TRUE(update_out_params.empty());
+
+    // More AAD
+    EXPECT_EQ(ErrorCode::INVALID_TAG,
+              Update(update_params, "", &update_out_params, &ciphertext, &input_consumed));
+
+    op_.clear();
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmBadAad
+ *
+ * Verifies that AES GCM decryption fails correctly when additional authenticated date is wrong.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmBadAad) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string message = "12345678901234567890123456789012";
+    auto begin_params = AuthorizationSetBuilder()
+                                .BlockMode(BlockMode::GCM)
+                                .Padding(PaddingMode::NONE)
+                                .Authorization(TAG_MAC_LENGTH, 128);
+
+    auto finish_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, "foobar", (size_t)6);
+
+    // Encrypt
+    AuthorizationSet begin_out_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+    string ciphertext;
+    AuthorizationSet finish_out_params;
+    EXPECT_EQ(ErrorCode::OK,
+              Finish(finish_params, message, "" /* signature */, &finish_out_params, &ciphertext));
+
+    // Grab nonce
+    begin_params.push_back(begin_out_params);
+
+    finish_params = AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA,
+                                                            "barfoo" /* Wrong AAD */, (size_t)6);
+
+    // Decrypt.
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params, &begin_out_params));
+    string plaintext;
+    EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(finish_params, ciphertext, "" /* signature */,
+                                                     &finish_out_params, &plaintext));
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmWrongNonce
+ *
+ * Verifies that AES GCM decryption fails correctly when the nonce is incorrect.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmWrongNonce) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string message = "12345678901234567890123456789012";
+    auto begin_params = AuthorizationSetBuilder()
+                                .BlockMode(BlockMode::GCM)
+                                .Padding(PaddingMode::NONE)
+                                .Authorization(TAG_MAC_LENGTH, 128);
+
+    auto finish_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, "foobar", (size_t)6);
+
+    // Encrypt
+    AuthorizationSet begin_out_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+    string ciphertext;
+    AuthorizationSet finish_out_params;
+    EXPECT_EQ(ErrorCode::OK,
+              Finish(finish_params, message, "" /* signature */, &finish_out_params, &ciphertext));
+
+    // Wrong nonce
+    begin_params.push_back(TAG_NONCE, AidlBuf("123456789012"));
+
+    // Decrypt.
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params, &begin_out_params));
+    string plaintext;
+    EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(finish_params, ciphertext, "" /* signature */,
+                                                     &finish_out_params, &plaintext));
+
+    // With wrong nonce, should have gotten garbage plaintext (or none).
+    EXPECT_NE(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.AesGcmCorruptTag
+ *
+ * Verifies that AES GCM decryption fails correctly when the tag is wrong.
+ */
+TEST_P(EncryptionOperationsTest, AesGcmCorruptTag) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::GCM)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MIN_MAC_LENGTH, 128)));
+
+    string aad = "1234567890123456";
+    string message = "123456789012345678901234567890123456";
+
+    auto params = AuthorizationSetBuilder()
+                          .BlockMode(BlockMode::GCM)
+                          .Padding(PaddingMode::NONE)
+                          .Authorization(TAG_MAC_LENGTH, 128);
+
+    auto finish_params =
+            AuthorizationSetBuilder().Authorization(TAG_ASSOCIATED_DATA, aad.data(), aad.size());
+
+    // Encrypt
+    AuthorizationSet begin_out_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &begin_out_params));
+    string ciphertext;
+    AuthorizationSet finish_out_params;
+    EXPECT_EQ(ErrorCode::OK,
+              Finish(finish_params, message, "" /* signature */, &finish_out_params, &ciphertext));
+    EXPECT_TRUE(finish_out_params.empty());
+
+    // Corrupt tag
+    ++(*ciphertext.rbegin());
+
+    // Grab nonce
+    params.push_back(begin_out_params);
+
+    // Decrypt.
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+    string plaintext;
+    EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(finish_params, ciphertext, "" /* signature */,
+                                                     &finish_out_params, &plaintext));
+    EXPECT_TRUE(finish_out_params.empty());
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesEcbRoundTripSuccess
+ *
+ * Verifies that 3DES is basically functional.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesEcbRoundTripSuccess) {
+    auto auths = AuthorizationSetBuilder()
+                         .TripleDesEncryptionKey(168)
+                         .BlockMode(BlockMode::ECB)
+                         .Authorization(TAG_NO_AUTH_REQUIRED)
+                         .Padding(PaddingMode::NONE);
+
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(auths));
+    // Two-block message.
+    string message = "1234567890123456";
+    auto inParams = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::NONE);
+    string ciphertext1 = EncryptMessage(message, inParams);
+    EXPECT_EQ(message.size(), ciphertext1.size());
+
+    string ciphertext2 = EncryptMessage(string(message), inParams);
+    EXPECT_EQ(message.size(), ciphertext2.size());
+
+    // ECB is deterministic.
+    EXPECT_EQ(ciphertext1, ciphertext2);
+
+    string plaintext = DecryptMessage(ciphertext1, inParams);
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesEcbNotAuthorized
+ *
+ * Verifies that CBC keys reject ECB usage.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesEcbNotAuthorized) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+
+    auto inParams = AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::NONE);
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_BLOCK_MODE, Begin(KeyPurpose::ENCRYPT, inParams));
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesEcbPkcs7Padding
+ *
+ * Tests ECB mode with PKCS#7 padding, various message sizes.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesEcbPkcs7Padding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::ECB)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::PKCS7)));
+
+    for (size_t i = 0; i < 32; ++i) {
+        string message(i, 'a');
+        auto inParams =
+                AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::PKCS7);
+        string ciphertext = EncryptMessage(message, inParams);
+        EXPECT_EQ(i + 8 - (i % 8), ciphertext.size());
+        string plaintext = DecryptMessage(ciphertext, inParams);
+        EXPECT_EQ(message, plaintext);
+    }
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesEcbNoPaddingKeyWithPkcs7Padding
+ *
+ * Verifies that keys configured for no padding reject PKCS7 padding
+ */
+TEST_P(EncryptionOperationsTest, TripleDesEcbNoPaddingKeyWithPkcs7Padding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::ECB)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+    for (size_t i = 0; i < 32; ++i) {
+        auto inParams =
+                AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::PKCS7);
+        EXPECT_EQ(ErrorCode::INCOMPATIBLE_PADDING_MODE, Begin(KeyPurpose::ENCRYPT, inParams));
+    }
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesEcbPkcs7PaddingCorrupted
+ *
+ * Verifies that corrupted padding is detected.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesEcbPkcs7PaddingCorrupted) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::ECB)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::PKCS7)));
+
+    string message = "a";
+    string ciphertext = EncryptMessage(message, BlockMode::ECB, PaddingMode::PKCS7);
+    EXPECT_EQ(8U, ciphertext.size());
+    EXPECT_NE(ciphertext, message);
+    ++ciphertext[ciphertext.size() / 2];
+
+    AuthorizationSetBuilder begin_params;
+    begin_params.push_back(TAG_BLOCK_MODE, BlockMode::ECB);
+    begin_params.push_back(TAG_PADDING, PaddingMode::PKCS7);
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
+    string plaintext;
+    int32_t input_consumed;
+    EXPECT_EQ(ErrorCode::OK, Update(ciphertext, &plaintext, &input_consumed));
+    EXPECT_EQ(ciphertext.size(), input_consumed);
+    EXPECT_EQ(ErrorCode::INVALID_ARGUMENT, Finish(&plaintext));
+}
+
+struct TripleDesTestVector {
+    const char* name;
+    const KeyPurpose purpose;
+    const BlockMode block_mode;
+    const PaddingMode padding_mode;
+    const char* key;
+    const char* iv;
+    const char* input;
+    const char* output;
+};
+
+// These test vectors are from NIST CAVP, plus a few custom variants to test padding, since all
+// of the NIST vectors are multiples of the block size.
+static const TripleDesTestVector kTripleDesTestVectors[] = {
+        {
+                "TECBMMT3 Encrypt 0", KeyPurpose::ENCRYPT, BlockMode::ECB, PaddingMode::NONE,
+                "a2b5bc67da13dc92cd9d344aa238544a0e1fa79ef76810cd",  // key
+                "",                                                  // IV
+                "329d86bdf1bc5af4",                                  // input
+                "d946c2756d78633f",                                  // output
+        },
+        {
+                "TECBMMT3 Encrypt 1", KeyPurpose::ENCRYPT, BlockMode::ECB, PaddingMode::NONE,
+                "49e692290d2a5e46bace79b9648a4c5d491004c262dc9d49",  // key
+                "",                                                  // IV
+                "6b1540781b01ce1997adae102dbf3c5b",                  // input
+                "4d0dc182d6e481ac4a3dc6ab6976ccae",                  // output
+        },
+        {
+                "TECBMMT3 Decrypt 0", KeyPurpose::DECRYPT, BlockMode::ECB, PaddingMode::NONE,
+                "52daec2ac7dc1958377392682f37860b2cc1ea2304bab0e9",  // key
+                "",                                                  // IV
+                "6daad94ce08acfe7",                                  // input
+                "660e7d32dcc90e79",                                  // output
+        },
+        {
+                "TECBMMT3 Decrypt 1", KeyPurpose::DECRYPT, BlockMode::ECB, PaddingMode::NONE,
+                "7f8fe3d3f4a48394fb682c2919926d6ddfce8932529229ce",  // key
+                "",                                                  // IV
+                "e9653a0a1f05d31b9acd12d73aa9879d",                  // input
+                "9b2ae9d998efe62f1b592e7e1df8ff38",                  // output
+        },
+        {
+                "TCBCMMT3 Encrypt 0", KeyPurpose::ENCRYPT, BlockMode::CBC, PaddingMode::NONE,
+                "b5cb1504802326c73df186e3e352a20de643b0d63ee30e37",  // key
+                "43f791134c5647ba",                                  // IV
+                "dcc153cef81d6f24",                                  // input
+                "92538bd8af18d3ba",                                  // output
+        },
+        {
+                "TCBCMMT3 Encrypt 1", KeyPurpose::ENCRYPT, BlockMode::CBC, PaddingMode::NONE,
+                "a49d7564199e97cb529d2c9d97bf2f98d35edf57ba1f7358",  // key
+                "c2e999cb6249023c",                                  // IV
+                "c689aee38a301bb316da75db36f110b5",                  // input
+                "e9afaba5ec75ea1bbe65506655bb4ecb",                  // output
+        },
+        {
+                "TCBCMMT3 Encrypt 1 PKCS7 variant", KeyPurpose::ENCRYPT, BlockMode::CBC,
+                PaddingMode::PKCS7,
+                "a49d7564199e97cb529d2c9d97bf2f98d35edf57ba1f7358",  // key
+                "c2e999cb6249023c",                                  // IV
+                "c689aee38a301bb316da75db36f110b500",                // input
+                "e9afaba5ec75ea1bbe65506655bb4ecb825aa27ec0656156",  // output
+        },
+        {
+                "TCBCMMT3 Encrypt 1 PKCS7 decrypted", KeyPurpose::DECRYPT, BlockMode::CBC,
+                PaddingMode::PKCS7,
+                "a49d7564199e97cb529d2c9d97bf2f98d35edf57ba1f7358",  // key
+                "c2e999cb6249023c",                                  // IV
+                "e9afaba5ec75ea1bbe65506655bb4ecb825aa27ec0656156",  // input
+                "c689aee38a301bb316da75db36f110b500",                // output
+        },
+        {
+                "TCBCMMT3 Decrypt 0", KeyPurpose::DECRYPT, BlockMode::CBC, PaddingMode::NONE,
+                "5eb6040d46082c7aa7d06dfd08dfeac8c18364c1548c3ba1",  // key
+                "41746c7e442d3681",                                  // IV
+                "c53a7b0ec40600fe",                                  // input
+                "d4f00eb455de1034",                                  // output
+        },
+        {
+                "TCBCMMT3 Decrypt 1", KeyPurpose::DECRYPT, BlockMode::CBC, PaddingMode::NONE,
+                "5b1cce7c0dc1ec49130dfb4af45785ab9179e567f2c7d549",  // key
+                "3982bc02c3727d45",                                  // IV
+                "6006f10adef52991fcc777a1238bbb65",                  // input
+                "edae09288e9e3bc05746d872b48e3b29",                  // output
+        },
+};
+
+/*
+ * EncryptionOperationsTest.TripleDesTestVector
+ *
+ * Verifies that NIST (plus a few extra) test vectors produce the correct results.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesTestVector) {
+    constexpr size_t num_tests = sizeof(kTripleDesTestVectors) / sizeof(TripleDesTestVector);
+    for (auto* test = kTripleDesTestVectors; test < kTripleDesTestVectors + num_tests; ++test) {
+        SCOPED_TRACE(test->name);
+        CheckTripleDesTestVector(test->purpose, test->block_mode, test->padding_mode,
+                                 hex2str(test->key), hex2str(test->iv), hex2str(test->input),
+                                 hex2str(test->output));
+    }
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesCbcRoundTripSuccess
+ *
+ * Validates CBC mode functionality.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCbcRoundTripSuccess) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+
+    ASSERT_GT(key_blob_.size(), 0U);
+
+    // Two-block message.
+    string message = "1234567890123456";
+    vector<uint8_t> iv1;
+    string ciphertext1 = EncryptMessage(message, BlockMode::CBC, PaddingMode::NONE, &iv1);
+    EXPECT_EQ(message.size(), ciphertext1.size());
+
+    vector<uint8_t> iv2;
+    string ciphertext2 = EncryptMessage(message, BlockMode::CBC, PaddingMode::NONE, &iv2);
+    EXPECT_EQ(message.size(), ciphertext2.size());
+
+    // IVs should be random, so ciphertexts should differ.
+    EXPECT_NE(iv1, iv2);
+    EXPECT_NE(ciphertext1, ciphertext2);
+
+    string plaintext = DecryptMessage(ciphertext1, BlockMode::CBC, PaddingMode::NONE, iv1);
+    EXPECT_EQ(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesCallerIv
+ *
+ * Validates that 3DES keys can allow caller-specified IVs, and use them correctly.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCallerIv) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Authorization(TAG_CALLER_NONCE)
+                                                 .Padding(PaddingMode::NONE)));
+    string message = "1234567890123456";
+    vector<uint8_t> iv;
+    // Don't specify IV, should get a random one.
+    string ciphertext1 = EncryptMessage(message, BlockMode::CBC, PaddingMode::NONE, &iv);
+    EXPECT_EQ(message.size(), ciphertext1.size());
+    EXPECT_EQ(8U, iv.size());
+
+    string plaintext = DecryptMessage(ciphertext1, BlockMode::CBC, PaddingMode::NONE, iv);
+    EXPECT_EQ(message, plaintext);
+
+    // Now specify an IV, should also work.
+    iv = AidlBuf("abcdefgh");
+    string ciphertext2 = EncryptMessage(message, BlockMode::CBC, PaddingMode::NONE, iv);
+
+    // Decrypt with correct IV.
+    plaintext = DecryptMessage(ciphertext2, BlockMode::CBC, PaddingMode::NONE, iv);
+    EXPECT_EQ(message, plaintext);
+
+    // Now try with wrong IV.
+    plaintext = DecryptMessage(ciphertext2, BlockMode::CBC, PaddingMode::NONE, AidlBuf("aaaaaaaa"));
+    EXPECT_NE(message, plaintext);
+}
+
+/*
+ * EncryptionOperationsTest, TripleDesCallerNonceProhibited.
+ *
+ * Verifies that 3DES keys without TAG_CALLER_NONCE do not allow caller-specified IVS.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCallerNonceProhibited) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+
+    string message = "12345678901234567890123456789012";
+    vector<uint8_t> iv;
+    // Don't specify nonce, should get a random one.
+    string ciphertext1 = EncryptMessage(message, BlockMode::CBC, PaddingMode::NONE, &iv);
+    EXPECT_EQ(message.size(), ciphertext1.size());
+    EXPECT_EQ(8U, iv.size());
+
+    string plaintext = DecryptMessage(ciphertext1, BlockMode::CBC, PaddingMode::NONE, iv);
+    EXPECT_EQ(message, plaintext);
+
+    // Now specify a nonce, should fail.
+    auto input_params = AuthorizationSetBuilder()
+                                .Authorization(TAG_NONCE, AidlBuf("abcdefgh"))
+                                .BlockMode(BlockMode::CBC)
+                                .Padding(PaddingMode::NONE);
+    AuthorizationSet output_params;
+    EXPECT_EQ(ErrorCode::CALLER_NONCE_PROHIBITED,
+              Begin(KeyPurpose::ENCRYPT, input_params, &output_params));
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesCbcNotAuthorized
+ *
+ * Verifies that 3DES ECB-only keys do not allow CBC usage.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCbcNotAuthorized) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::ECB)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+    // Two-block message.
+    string message = "1234567890123456";
+    auto begin_params =
+            AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::NONE);
+    EXPECT_EQ(ErrorCode::INCOMPATIBLE_BLOCK_MODE, Begin(KeyPurpose::ENCRYPT, begin_params));
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesCbcNoPaddingWrongInputSize
+ *
+ * Verifies that unpadded CBC operations reject inputs that are not a multiple of block size.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCbcNoPaddingWrongInputSize) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+    // Message is slightly shorter than two blocks.
+    string message = "123456789012345";
+
+    auto begin_params =
+            AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::NONE);
+    AuthorizationSet output_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &output_params));
+    string ciphertext;
+    EXPECT_EQ(ErrorCode::INVALID_INPUT_LENGTH, Finish(message, "", &ciphertext));
+}
+
+/*
+ * EncryptionOperationsTest, TripleDesCbcPkcs7Padding.
+ *
+ * Verifies that PKCS7 padding works correctly in CBC mode.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCbcPkcs7Padding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::PKCS7)));
+
+    // Try various message lengths; all should work.
+    for (size_t i = 0; i < 32; ++i) {
+        string message(i, 'a');
+        vector<uint8_t> iv;
+        string ciphertext = EncryptMessage(message, BlockMode::CBC, PaddingMode::PKCS7, &iv);
+        EXPECT_EQ(i + 8 - (i % 8), ciphertext.size());
+        string plaintext = DecryptMessage(ciphertext, BlockMode::CBC, PaddingMode::PKCS7, iv);
+        EXPECT_EQ(message, plaintext);
+    }
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesCbcNoPaddingKeyWithPkcs7Padding
+ *
+ * Verifies that a key that requires PKCS7 padding cannot be used in unpadded mode.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCbcNoPaddingKeyWithPkcs7Padding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+
+    // Try various message lengths; all should fail.
+    for (size_t i = 0; i < 32; ++i) {
+        auto begin_params =
+                AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::PKCS7);
+        EXPECT_EQ(ErrorCode::INCOMPATIBLE_PADDING_MODE, Begin(KeyPurpose::ENCRYPT, begin_params));
+    }
+}
+
+/*
+ * EncryptionOperationsTest.TripleDesCbcPkcs7PaddingCorrupted
+ *
+ * Verifies that corrupted PKCS7 padding is rejected during decryption.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCbcPkcs7PaddingCorrupted) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::PKCS7)));
+
+    string message = "a";
+    vector<uint8_t> iv;
+    string ciphertext = EncryptMessage(message, BlockMode::CBC, PaddingMode::PKCS7, &iv);
+    EXPECT_EQ(8U, ciphertext.size());
+    EXPECT_NE(ciphertext, message);
+    ++ciphertext[ciphertext.size() / 2];
+
+    auto begin_params = AuthorizationSetBuilder()
+                                .BlockMode(BlockMode::CBC)
+                                .Padding(PaddingMode::PKCS7)
+                                .Authorization(TAG_NONCE, iv);
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
+    string plaintext;
+    int32_t input_consumed;
+    EXPECT_EQ(ErrorCode::OK, Update(ciphertext, &plaintext, &input_consumed));
+    EXPECT_EQ(ciphertext.size(), input_consumed);
+    EXPECT_EQ(ErrorCode::INVALID_ARGUMENT, Finish(&plaintext));
+}
+
+/*
+ * EncryptionOperationsTest, TripleDesCbcIncrementalNoPadding.
+ *
+ * Verifies that 3DES CBC works with many different input sizes.
+ */
+TEST_P(EncryptionOperationsTest, TripleDesCbcIncrementalNoPadding) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .TripleDesEncryptionKey(168)
+                                                 .BlockMode(BlockMode::CBC)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .Padding(PaddingMode::NONE)));
+
+    int increment = 7;
+    string message(240, 'a');
+    AuthorizationSet input_params =
+            AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::NONE);
+    AuthorizationSet output_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, input_params, &output_params));
+
+    string ciphertext;
+    int32_t input_consumed;
+    for (size_t i = 0; i < message.size(); i += increment)
+        EXPECT_EQ(ErrorCode::OK,
+                  Update(message.substr(i, increment), &ciphertext, &input_consumed));
+    EXPECT_EQ(ErrorCode::OK, Finish(&ciphertext));
+    EXPECT_EQ(message.size(), ciphertext.size());
+
+    // Move TAG_NONCE into input_params
+    input_params = output_params;
+    input_params.push_back(TAG_BLOCK_MODE, BlockMode::CBC);
+    input_params.push_back(TAG_PADDING, PaddingMode::NONE);
+    output_params.Clear();
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, input_params, &output_params));
+    string plaintext;
+    for (size_t i = 0; i < ciphertext.size(); i += increment)
+        EXPECT_EQ(ErrorCode::OK,
+                  Update(ciphertext.substr(i, increment), &plaintext, &input_consumed));
+    EXPECT_EQ(ErrorCode::OK, Finish(&plaintext));
+    EXPECT_EQ(ciphertext.size(), plaintext.size());
+    EXPECT_EQ(message, plaintext);
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(EncryptionOperationsTest);
+
+typedef KeyMintAidlTestBase MaxOperationsTest;
+
+/*
+ * MaxOperationsTest.TestLimitAes
+ *
+ * Verifies that the max uses per boot tag works correctly with AES keys.
+ */
+TEST_P(MaxOperationsTest, TestLimitAes) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .EcbMode()
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_MAX_USES_PER_BOOT, 3)));
+
+    string message = "1234567890123456";
+
+    auto params = AuthorizationSetBuilder().EcbMode().Padding(PaddingMode::NONE);
+
+    EncryptMessage(message, params);
+    EncryptMessage(message, params);
+    EncryptMessage(message, params);
+
+    // Fourth time should fail.
+    EXPECT_EQ(ErrorCode::KEY_MAX_OPS_EXCEEDED, Begin(KeyPurpose::ENCRYPT, params));
+}
+
+/*
+ * MaxOperationsTest.TestLimitAes
+ *
+ * Verifies that the max uses per boot tag works correctly with RSA keys.
+ */
+TEST_P(MaxOperationsTest, TestLimitRsa) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
+
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaSigningKey(1024, 65537)
+                                                 .NoDigestOrPadding()
+                                                 .Authorization(TAG_MAX_USES_PER_BOOT, 3)));
+
+    string message = "1234567890123456";
+
+    auto params = AuthorizationSetBuilder().NoDigestOrPadding();
+
+    SignMessage(message, params);
+    SignMessage(message, params);
+    SignMessage(message, params);
+
+    // Fourth time should fail.
+    EXPECT_EQ(ErrorCode::KEY_MAX_OPS_EXCEEDED, Begin(KeyPurpose::SIGN, params));
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(MaxOperationsTest);
+
+typedef KeyMintAidlTestBase AddEntropyTest;
+
+/*
+ * AddEntropyTest.AddEntropy
+ *
+ * Verifies that the addRngEntropy method doesn't blow up.  There's no way to test that entropy
+ * is actually added.
+ */
+TEST_P(AddEntropyTest, AddEntropy) {
+    string data = "foo";
+    EXPECT_TRUE(keyMint().addRngEntropy(vector<uint8_t>(data.begin(), data.end())).isOk());
+}
+
+/*
+ * AddEntropyTest.AddEmptyEntropy
+ *
+ * Verifies that the addRngEntropy method doesn't blow up when given an empty buffer.
+ */
+TEST_P(AddEntropyTest, AddEmptyEntropy) {
+    EXPECT_TRUE(keyMint().addRngEntropy(AidlBuf()).isOk());
+}
+
+/*
+ * AddEntropyTest.AddLargeEntropy
+ *
+ * Verifies that the addRngEntropy method doesn't blow up when given a largish amount of data.
+ */
+TEST_P(AddEntropyTest, AddLargeEntropy) {
+    EXPECT_TRUE(keyMint().addRngEntropy(AidlBuf(string(2 * 1024, 'a'))).isOk());
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(AddEntropyTest);
+
+typedef KeyMintAidlTestBase AttestationTest;
+
+/*
+ * AttestationTest.RsaAttestation
+ *
+ * Verifies that attesting to RSA keys works and generates the expected output.
+ */
+// TODO(seleneh) add attestation tests back after decided on the new attestation
+// behavior under generateKey and importKey
+
+typedef KeyMintAidlTestBase KeyDeletionTest;
+
+/**
+ * KeyDeletionTest.DeleteKey
+ *
+ * This test checks that if rollback protection is implemented, DeleteKey invalidates a formerly
+ * valid key blob.
+ */
+TEST_P(KeyDeletionTest, DeleteKey) {
+    auto error = GenerateKey(AuthorizationSetBuilder()
+                                     .RsaSigningKey(2048, 65537)
+                                     .Digest(Digest::NONE)
+                                     .Padding(PaddingMode::NONE)
+                                     .Authorization(TAG_NO_AUTH_REQUIRED)
+                                     .Authorization(TAG_ROLLBACK_RESISTANCE));
+    ASSERT_TRUE(error == ErrorCode::ROLLBACK_RESISTANCE_UNAVAILABLE || error == ErrorCode::OK);
+
+    // Delete must work if rollback protection is implemented
+    if (error == ErrorCode::OK) {
+        AuthorizationSet hardwareEnforced(key_characteristics_.hardwareEnforced);
+        ASSERT_TRUE(hardwareEnforced.Contains(TAG_ROLLBACK_RESISTANCE));
+
+        ASSERT_EQ(ErrorCode::OK, DeleteKey(true /* keep key blob */));
+
+        string message = "12345678901234567890123456789012";
+        AuthorizationSet begin_out_params;
+        EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+                  Begin(KeyPurpose::SIGN, key_blob_,
+                        AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE),
+                        &begin_out_params));
+        AbortIfNeeded();
+        key_blob_ = AidlBuf();
+    }
+}
+
+/**
+ * KeyDeletionTest.DeleteInvalidKey
+ *
+ * This test checks that the HAL excepts invalid key blobs..
+ */
+TEST_P(KeyDeletionTest, DeleteInvalidKey) {
+    // Generate key just to check if rollback protection is implemented
+    auto error = GenerateKey(AuthorizationSetBuilder()
+                                     .RsaSigningKey(2048, 65537)
+                                     .Digest(Digest::NONE)
+                                     .Padding(PaddingMode::NONE)
+                                     .Authorization(TAG_NO_AUTH_REQUIRED)
+                                     .Authorization(TAG_ROLLBACK_RESISTANCE));
+    ASSERT_TRUE(error == ErrorCode::ROLLBACK_RESISTANCE_UNAVAILABLE || error == ErrorCode::OK);
+
+    // Delete must work if rollback protection is implemented
+    if (error == ErrorCode::OK) {
+        AuthorizationSet hardwareEnforced(key_characteristics_.hardwareEnforced);
+        ASSERT_TRUE(hardwareEnforced.Contains(TAG_ROLLBACK_RESISTANCE));
+
+        // Delete the key we don't care about the result at this point.
+        DeleteKey();
+
+        // Now create an invalid key blob and delete it.
+        key_blob_ = AidlBuf("just some garbage data which is not a valid key blob");
+
+        ASSERT_EQ(ErrorCode::OK, DeleteKey());
+    }
+}
+
+/**
+ * KeyDeletionTest.DeleteAllKeys
+ *
+ * This test is disarmed by default. To arm it use --arm_deleteAllKeys.
+ *
+ * BEWARE: This test has serious side effects. All user keys will be lost! This includes
+ * FBE/FDE encryption keys, which means that the device will not even boot until after the
+ * device has been wiped manually (e.g., fastboot flashall -w), and new FBE/FDE keys have
+ * been provisioned. Use this test only on dedicated testing devices that have no valuable
+ * credentials stored in Keystore/Keymint.
+ */
+TEST_P(KeyDeletionTest, DeleteAllKeys) {
+    if (!arm_deleteAllKeys) return;
+    auto error = GenerateKey(AuthorizationSetBuilder()
+                                     .RsaSigningKey(2048, 65537)
+                                     .Digest(Digest::NONE)
+                                     .Padding(PaddingMode::NONE)
+                                     .Authorization(TAG_NO_AUTH_REQUIRED)
+                                     .Authorization(TAG_ROLLBACK_RESISTANCE));
+    ASSERT_TRUE(error == ErrorCode::ROLLBACK_RESISTANCE_UNAVAILABLE || error == ErrorCode::OK);
+
+    // Delete must work if rollback protection is implemented
+    if (error == ErrorCode::OK) {
+        AuthorizationSet hardwareEnforced(key_characteristics_.hardwareEnforced);
+        ASSERT_TRUE(hardwareEnforced.Contains(TAG_ROLLBACK_RESISTANCE));
+
+        ASSERT_EQ(ErrorCode::OK, DeleteAllKeys());
+
+        string message = "12345678901234567890123456789012";
+        AuthorizationSet begin_out_params;
+
+        EXPECT_EQ(ErrorCode::INVALID_KEY_BLOB,
+                  Begin(KeyPurpose::SIGN, key_blob_,
+                        AuthorizationSetBuilder().Digest(Digest::NONE).Padding(PaddingMode::NONE),
+                        &begin_out_params));
+        AbortIfNeeded();
+        key_blob_ = AidlBuf();
+    }
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(KeyDeletionTest);
+
+using UpgradeKeyTest = KeyMintAidlTestBase;
+
+/*
+ * UpgradeKeyTest.UpgradeKey
+ *
+ * Verifies that calling upgrade key on an up-to-date key works (i.e. does nothing).
+ */
+TEST_P(UpgradeKeyTest, UpgradeKey) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .AesEncryptionKey(128)
+                                                 .Padding(PaddingMode::NONE)
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)));
+
+    auto result = UpgradeKey(key_blob_);
+
+    // Key doesn't need upgrading.  Should get okay, but no new key blob.
+    EXPECT_EQ(result, std::make_pair(ErrorCode::OK, vector<uint8_t>()));
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(UpgradeKeyTest);
+
+using ClearOperationsTest = KeyMintAidlTestBase;
+
+/*
+ * ClearSlotsTest.TooManyOperations
+ *
+ * Verifies that TOO_MANY_OPERATIONS is returned after the max number of
+ * operations are started without being finished or aborted. Also verifies
+ * that aborting the operations clears the operations.
+ *
+ */
+TEST_P(ClearOperationsTest, TooManyOperations) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(2048, 65537)
+                                                 .Padding(PaddingMode::NONE)));
+
+    auto params = AuthorizationSetBuilder().Padding(PaddingMode::NONE);
+    constexpr size_t max_operations = 100;  // set to arbituary large number
+    sp<IKeyMintOperation> op_handles[max_operations];
+    AuthorizationSet out_params;
+    ErrorCode result;
+    size_t i;
+
+    for (i = 0; i < max_operations; i++) {
+        result = Begin(KeyPurpose::ENCRYPT, key_blob_, params, &out_params, op_handles[i]);
+        if (ErrorCode::OK != result) {
+            break;
+        }
+    }
+    EXPECT_EQ(ErrorCode::TOO_MANY_OPERATIONS, result);
+    // Try again just in case there's a weird overflow bug
+    EXPECT_EQ(ErrorCode::TOO_MANY_OPERATIONS,
+              Begin(KeyPurpose::ENCRYPT, key_blob_, params, &out_params));
+    for (size_t j = 0; j < i; j++) {
+        EXPECT_EQ(ErrorCode::OK, Abort(op_handles[j]))
+                << "Aboort failed for i = " << j << std::endl;
+    }
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, key_blob_, params, &out_params));
+    AbortIfNeeded();
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(ClearOperationsTest);
+
+typedef KeyMintAidlTestBase TransportLimitTest;
+
+/*
+ * TransportLimitTest.FinishInput
+ *
+ * Verifies that passing input data to finish succeeds as expected.
+ */
+TEST_P(TransportLimitTest, LargeFinishInput) {
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .AesEncryptionKey(128)
+                                                 .BlockMode(BlockMode::ECB)
+                                                 .Padding(PaddingMode::NONE)));
+
+    for (int msg_size = 8 /* 256 bytes */; msg_size <= 11 /* 2 KiB */; msg_size++) {
+        auto cipher_params =
+                AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::NONE);
+
+        AuthorizationSet out_params;
+        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, cipher_params, &out_params));
+
+        string plain_message = std::string(1 << msg_size, 'x');
+        string encrypted_message;
+        auto rc = Finish(plain_message, &encrypted_message);
+
+        EXPECT_EQ(ErrorCode::OK, rc);
+        EXPECT_EQ(plain_message.size(), encrypted_message.size())
+                << "Encrypt finish returned OK, but did not consume all of the given input";
+        cipher_params.push_back(out_params);
+
+        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, cipher_params));
+
+        string decrypted_message;
+        rc = Finish(encrypted_message, &decrypted_message);
+        EXPECT_EQ(ErrorCode::OK, rc);
+        EXPECT_EQ(plain_message.size(), decrypted_message.size())
+                << "Decrypt finish returned OK, did not consume all of the given input";
+    }
+}
+
+INSTANTIATE_KEYMINT_AIDL_TEST(TransportLimitTest);
+
+}  // namespace test
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    for (int i = 1; i < argc; ++i) {
+        if (argv[i][0] == '-') {
+            if (std::string(argv[i]) == "--arm_deleteAllKeys") {
+                arm_deleteAllKeys = true;
+            }
+            if (std::string(argv[i]) == "--dump_attestations") {
+                dump_Attestations = true;
+            }
+        }
+    }
+    int status = RUN_ALL_TESTS();
+    ALOGI("Test result = %d", status);
+    return status;
+}
diff --git a/keymint/support/Android.bp b/keymint/support/Android.bp
new file mode 100644
index 0000000..432416e
--- /dev/null
+++ b/keymint/support/Android.bp
@@ -0,0 +1,39 @@
+//
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_library {
+    name: "libkeymintSupport",
+    cflags: [
+        "-Wall",
+        "-Wextra",
+        "-Werror",
+    ],
+    srcs: [
+        "attestation_record.cpp",
+        "authorization_set.cpp",
+        "keymint_utils.cpp",
+        "key_param_output.cpp",
+    ],
+    export_include_dirs: [
+        "include",
+    ],
+    shared_libs: [
+        "android.hardware.keymint-cpp",
+        "libbase",
+        "libcrypto",
+        "libutils",
+    ],
+}
diff --git a/keymint/support/OWNERS b/keymint/support/OWNERS
new file mode 100644
index 0000000..a93b171
--- /dev/null
+++ b/keymint/support/OWNERS
@@ -0,0 +1,4 @@
+jbires@google.com
+jdanis@google.com
+seleneh@google.com
+swillden@google.com
diff --git a/keymint/support/attestation_record.cpp b/keymint/support/attestation_record.cpp
new file mode 100644
index 0000000..e565974
--- /dev/null
+++ b/keymint/support/attestation_record.cpp
@@ -0,0 +1,387 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <keymintSupport/attestation_record.h>
+
+#include <android/hardware/keymint/Tag.h>
+#include <android/hardware/keymint/TagType.h>
+
+#include <android-base/logging.h>
+#include <assert.h>
+
+#include <openssl/asn1t.h>
+#include <openssl/bn.h>
+#include <openssl/evp.h>
+#include <openssl/x509.h>
+
+#include <keymintSupport/authorization_set.h>
+#include <keymintSupport/openssl_utils.h>
+
+#define AT __FILE__ ":" << __LINE__
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+struct stack_st_ASN1_TYPE_Delete {
+    void operator()(stack_st_ASN1_TYPE* p) { sk_ASN1_TYPE_free(p); }
+};
+
+struct ASN1_STRING_Delete {
+    void operator()(ASN1_STRING* p) { ASN1_STRING_free(p); }
+};
+
+struct ASN1_TYPE_Delete {
+    void operator()(ASN1_TYPE* p) { ASN1_TYPE_free(p); }
+};
+
+#define ASN1_INTEGER_SET STACK_OF(ASN1_INTEGER)
+
+typedef struct km_root_of_trust {
+    ASN1_OCTET_STRING* verified_boot_key;
+    ASN1_BOOLEAN device_locked;
+    ASN1_ENUMERATED* verified_boot_state;
+    ASN1_OCTET_STRING* verified_boot_hash;
+} KM_ROOT_OF_TRUST;
+
+ASN1_SEQUENCE(KM_ROOT_OF_TRUST) = {
+        ASN1_SIMPLE(KM_ROOT_OF_TRUST, verified_boot_key, ASN1_OCTET_STRING),
+        ASN1_SIMPLE(KM_ROOT_OF_TRUST, device_locked, ASN1_BOOLEAN),
+        ASN1_SIMPLE(KM_ROOT_OF_TRUST, verified_boot_state, ASN1_ENUMERATED),
+        ASN1_SIMPLE(KM_ROOT_OF_TRUST, verified_boot_hash, ASN1_OCTET_STRING),
+} ASN1_SEQUENCE_END(KM_ROOT_OF_TRUST);
+IMPLEMENT_ASN1_FUNCTIONS(KM_ROOT_OF_TRUST);
+
+typedef struct km_auth_list {
+    ASN1_INTEGER_SET* purpose;
+    ASN1_INTEGER* algorithm;
+    ASN1_INTEGER* key_size;
+    ASN1_INTEGER_SET* digest;
+    ASN1_INTEGER_SET* padding;
+    ASN1_INTEGER* ec_curve;
+    ASN1_INTEGER* rsa_public_exponent;
+    ASN1_INTEGER* active_date_time;
+    ASN1_INTEGER* origination_expire_date_time;
+    ASN1_INTEGER* usage_expire_date_time;
+    ASN1_NULL* no_auth_required;
+    ASN1_INTEGER* user_auth_type;
+    ASN1_INTEGER* auth_timeout;
+    ASN1_NULL* allow_while_on_body;
+    ASN1_NULL* all_applications;
+    ASN1_OCTET_STRING* application_id;
+    ASN1_INTEGER* creation_date_time;
+    ASN1_INTEGER* origin;
+    ASN1_NULL* rollback_resistance;
+    KM_ROOT_OF_TRUST* root_of_trust;
+    ASN1_INTEGER* os_version;
+    ASN1_INTEGER* os_patchlevel;
+    ASN1_OCTET_STRING* attestation_application_id;
+    ASN1_NULL* trusted_user_presence_required;
+    ASN1_NULL* trusted_confirmation_required;
+    ASN1_NULL* unlocked_device_required;
+    ASN1_INTEGER* vendor_patchlevel;
+    ASN1_INTEGER* boot_patchlevel;
+    ASN1_NULL* early_boot_only;
+    ASN1_NULL* device_unique_attestation;
+    ASN1_NULL* storage_key;
+    ASN1_NULL* identity_credential;
+} KM_AUTH_LIST;
+
+ASN1_SEQUENCE(KM_AUTH_LIST) = {
+        ASN1_EXP_SET_OF_OPT(KM_AUTH_LIST, purpose, ASN1_INTEGER, TAG_PURPOSE.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, algorithm, ASN1_INTEGER, TAG_ALGORITHM.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, key_size, ASN1_INTEGER, TAG_KEY_SIZE.maskedTag()),
+        ASN1_EXP_SET_OF_OPT(KM_AUTH_LIST, digest, ASN1_INTEGER, TAG_DIGEST.maskedTag()),
+        ASN1_EXP_SET_OF_OPT(KM_AUTH_LIST, padding, ASN1_INTEGER, TAG_PADDING.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, ec_curve, ASN1_INTEGER, TAG_EC_CURVE.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, rsa_public_exponent, ASN1_INTEGER,
+                     TAG_RSA_PUBLIC_EXPONENT.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, rollback_resistance, ASN1_NULL,
+                     TAG_ROLLBACK_RESISTANCE.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, active_date_time, ASN1_INTEGER, TAG_ACTIVE_DATETIME.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, origination_expire_date_time, ASN1_INTEGER,
+                     TAG_ORIGINATION_EXPIRE_DATETIME.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, usage_expire_date_time, ASN1_INTEGER,
+                     TAG_USAGE_EXPIRE_DATETIME.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, no_auth_required, ASN1_NULL, TAG_NO_AUTH_REQUIRED.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, user_auth_type, ASN1_INTEGER, TAG_USER_AUTH_TYPE.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, auth_timeout, ASN1_INTEGER, TAG_AUTH_TIMEOUT.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, allow_while_on_body, ASN1_NULL,
+                     TAG_ALLOW_WHILE_ON_BODY.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, trusted_user_presence_required, ASN1_NULL,
+                     TAG_TRUSTED_USER_PRESENCE_REQUIRED.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, trusted_confirmation_required, ASN1_NULL,
+                     TAG_TRUSTED_CONFIRMATION_REQUIRED.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, unlocked_device_required, ASN1_NULL,
+                     TAG_UNLOCKED_DEVICE_REQUIRED.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, creation_date_time, ASN1_INTEGER,
+                     TAG_CREATION_DATETIME.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, origin, ASN1_INTEGER, TAG_ORIGIN.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, root_of_trust, KM_ROOT_OF_TRUST, TAG_ROOT_OF_TRUST.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, os_version, ASN1_INTEGER, TAG_OS_VERSION.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, os_patchlevel, ASN1_INTEGER, TAG_OS_PATCHLEVEL.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, vendor_patchlevel, ASN1_INTEGER,
+                     TAG_VENDOR_PATCHLEVEL.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, boot_patchlevel, ASN1_INTEGER, TAG_BOOT_PATCHLEVEL.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, attestation_application_id, ASN1_OCTET_STRING,
+                     TAG_ATTESTATION_APPLICATION_ID.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, early_boot_only, ASN1_NULL, TAG_EARLY_BOOT_ONLY.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, device_unique_attestation, ASN1_NULL,
+                     TAG_DEVICE_UNIQUE_ATTESTATION.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, storage_key, ASN1_NULL, TAG_STORAGE_KEY.maskedTag()),
+        ASN1_EXP_OPT(KM_AUTH_LIST, identity_credential, ASN1_NULL,
+                     TAG_IDENTITY_CREDENTIAL_KEY.maskedTag()),
+
+} ASN1_SEQUENCE_END(KM_AUTH_LIST);
+IMPLEMENT_ASN1_FUNCTIONS(KM_AUTH_LIST);
+
+typedef struct km_key_description {
+    ASN1_INTEGER* attestation_version;
+    ASN1_ENUMERATED* attestation_security_level;
+    ASN1_INTEGER* keymint_version;
+    ASN1_ENUMERATED* keymint_security_level;
+    ASN1_OCTET_STRING* attestation_challenge;
+    KM_AUTH_LIST* software_enforced;
+    KM_AUTH_LIST* tee_enforced;
+    ASN1_INTEGER* unique_id;
+} KM_KEY_DESCRIPTION;
+
+ASN1_SEQUENCE(KM_KEY_DESCRIPTION) = {
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, attestation_version, ASN1_INTEGER),
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, attestation_security_level, ASN1_ENUMERATED),
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, keymint_version, ASN1_INTEGER),
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, keymint_security_level, ASN1_ENUMERATED),
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, attestation_challenge, ASN1_OCTET_STRING),
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, unique_id, ASN1_OCTET_STRING),
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, software_enforced, KM_AUTH_LIST),
+        ASN1_SIMPLE(KM_KEY_DESCRIPTION, tee_enforced, KM_AUTH_LIST),
+} ASN1_SEQUENCE_END(KM_KEY_DESCRIPTION);
+IMPLEMENT_ASN1_FUNCTIONS(KM_KEY_DESCRIPTION);
+
+template <Tag tag>
+void copyAuthTag(const stack_st_ASN1_INTEGER* stack, TypedTag<TagType::ENUM_REP, tag> ttag,
+                 AuthorizationSet* auth_list) {
+    typedef typename TypedTag2ValueType<decltype(ttag)>::type ValueT;
+    for (size_t i = 0; i < sk_ASN1_INTEGER_num(stack); ++i) {
+        auth_list->push_back(
+                ttag, static_cast<ValueT>(ASN1_INTEGER_get(sk_ASN1_INTEGER_value(stack, i))));
+    }
+}
+
+template <Tag tag>
+void copyAuthTag(const ASN1_INTEGER* asn1_int, TypedTag<TagType::ENUM, tag> ttag,
+                 AuthorizationSet* auth_list) {
+    typedef typename TypedTag2ValueType<decltype(ttag)>::type ValueT;
+    if (!asn1_int) return;
+    auth_list->push_back(ttag, static_cast<ValueT>(ASN1_INTEGER_get(asn1_int)));
+}
+
+template <Tag tag>
+void copyAuthTag(const ASN1_INTEGER* asn1_int, TypedTag<TagType::UINT, tag> ttag,
+                 AuthorizationSet* auth_list) {
+    if (!asn1_int) return;
+    auth_list->push_back(ttag, ASN1_INTEGER_get(asn1_int));
+}
+
+BIGNUM* construct_uint_max() {
+    BIGNUM* value = BN_new();
+    BIGNUM_Ptr one(BN_new());
+    BN_one(one.get());
+    BN_lshift(value, one.get(), 32);
+    return value;
+}
+
+uint64_t BignumToUint64(BIGNUM* num) {
+    static_assert((sizeof(BN_ULONG) == sizeof(uint32_t)) || (sizeof(BN_ULONG) == sizeof(uint64_t)),
+                  "This implementation only supports 32 and 64-bit BN_ULONG");
+    if (sizeof(BN_ULONG) == sizeof(uint32_t)) {
+        BIGNUM_Ptr uint_max(construct_uint_max());
+        BIGNUM_Ptr hi(BN_new()), lo(BN_new());
+        BN_CTX_Ptr ctx(BN_CTX_new());
+        BN_div(hi.get(), lo.get(), num, uint_max.get(), ctx.get());
+        return static_cast<uint64_t>(BN_get_word(hi.get())) << 32 | BN_get_word(lo.get());
+    } else if (sizeof(BN_ULONG) == sizeof(uint64_t)) {
+        return BN_get_word(num);
+    } else {
+        return 0;
+    }
+}
+
+template <Tag tag>
+void copyAuthTag(const ASN1_INTEGER* asn1_int, TypedTag<TagType::ULONG, tag> ttag,
+                 AuthorizationSet* auth_list) {
+    if (!asn1_int) return;
+    BIGNUM_Ptr num(ASN1_INTEGER_to_BN(asn1_int, nullptr));
+    auth_list->push_back(ttag, BignumToUint64(num.get()));
+}
+
+template <Tag tag>
+void copyAuthTag(const ASN1_INTEGER* asn1_int, TypedTag<TagType::DATE, tag> ttag,
+                 AuthorizationSet* auth_list) {
+    if (!asn1_int) return;
+    BIGNUM_Ptr num(ASN1_INTEGER_to_BN(asn1_int, nullptr));
+    auth_list->push_back(ttag, BignumToUint64(num.get()));
+}
+
+template <Tag tag>
+void copyAuthTag(const ASN1_NULL* asn1_null, TypedTag<TagType::BOOL, tag> ttag,
+                 AuthorizationSet* auth_list) {
+    if (!asn1_null) return;
+    auth_list->push_back(ttag);
+}
+
+template <Tag tag>
+void copyAuthTag(const ASN1_OCTET_STRING* asn1_string, TypedTag<TagType::BYTES, tag> ttag,
+                 AuthorizationSet* auth_list) {
+    if (!asn1_string) return;
+    vector<uint8_t> buf(asn1_string->data, asn1_string->data + asn1_string->length);
+    auth_list->push_back(ttag, buf);
+}
+
+// Extract the values from the specified ASN.1 record and place them in auth_list.
+static ErrorCode extract_auth_list(const KM_AUTH_LIST* record, AuthorizationSet* auth_list) {
+    if (!record) return ErrorCode::OK;
+
+    copyAuthTag(record->active_date_time, TAG_ACTIVE_DATETIME, auth_list);
+    copyAuthTag(record->algorithm, TAG_ALGORITHM, auth_list);
+    copyAuthTag(record->application_id, TAG_APPLICATION_ID, auth_list);
+    copyAuthTag(record->auth_timeout, TAG_AUTH_TIMEOUT, auth_list);
+    copyAuthTag(record->creation_date_time, TAG_CREATION_DATETIME, auth_list);
+    copyAuthTag(record->digest, TAG_DIGEST, auth_list);
+    copyAuthTag(record->ec_curve, TAG_EC_CURVE, auth_list);
+    copyAuthTag(record->key_size, TAG_KEY_SIZE, auth_list);
+    copyAuthTag(record->no_auth_required, TAG_NO_AUTH_REQUIRED, auth_list);
+    copyAuthTag(record->origin, TAG_ORIGIN, auth_list);
+    copyAuthTag(record->origination_expire_date_time, TAG_ORIGINATION_EXPIRE_DATETIME, auth_list);
+    copyAuthTag(record->os_patchlevel, TAG_OS_PATCHLEVEL, auth_list);
+    copyAuthTag(record->os_version, TAG_OS_VERSION, auth_list);
+    copyAuthTag(record->padding, TAG_PADDING, auth_list);
+    copyAuthTag(record->purpose, TAG_PURPOSE, auth_list);
+    copyAuthTag(record->rollback_resistance, TAG_ROLLBACK_RESISTANCE, auth_list);
+    copyAuthTag(record->rsa_public_exponent, TAG_RSA_PUBLIC_EXPONENT, auth_list);
+    copyAuthTag(record->usage_expire_date_time, TAG_USAGE_EXPIRE_DATETIME, auth_list);
+    copyAuthTag(record->user_auth_type, TAG_USER_AUTH_TYPE, auth_list);
+    copyAuthTag(record->attestation_application_id, TAG_ATTESTATION_APPLICATION_ID, auth_list);
+    copyAuthTag(record->vendor_patchlevel, TAG_VENDOR_PATCHLEVEL, auth_list);
+    copyAuthTag(record->boot_patchlevel, TAG_BOOT_PATCHLEVEL, auth_list);
+    copyAuthTag(record->trusted_user_presence_required, TAG_TRUSTED_USER_PRESENCE_REQUIRED,
+                auth_list);
+    copyAuthTag(record->trusted_confirmation_required, TAG_TRUSTED_CONFIRMATION_REQUIRED,
+                auth_list);
+    copyAuthTag(record->unlocked_device_required, TAG_UNLOCKED_DEVICE_REQUIRED, auth_list);
+    copyAuthTag(record->early_boot_only, TAG_EARLY_BOOT_ONLY, auth_list);
+    copyAuthTag(record->device_unique_attestation, TAG_DEVICE_UNIQUE_ATTESTATION, auth_list);
+    copyAuthTag(record->storage_key, TAG_STORAGE_KEY, auth_list);
+    copyAuthTag(record->identity_credential, TAG_IDENTITY_CREDENTIAL_KEY, auth_list);
+
+    return ErrorCode::OK;
+}
+
+MAKE_OPENSSL_PTR_TYPE(KM_KEY_DESCRIPTION)
+
+// Parse the DER-encoded attestation record, placing the results in keymint_version,
+// attestation_challenge, software_enforced, tee_enforced and unique_id.
+ErrorCode parse_attestation_record(const uint8_t* asn1_key_desc, size_t asn1_key_desc_len,
+                                   uint32_t* attestation_version,  //
+                                   SecurityLevel* attestation_security_level,
+                                   uint32_t* keymint_version, SecurityLevel* keymint_security_level,
+                                   vector<uint8_t>* attestation_challenge,
+                                   AuthorizationSet* software_enforced,
+                                   AuthorizationSet* tee_enforced,  //
+                                   vector<uint8_t>* unique_id) {
+    const uint8_t* p = asn1_key_desc;
+    KM_KEY_DESCRIPTION_Ptr record(d2i_KM_KEY_DESCRIPTION(nullptr, &p, asn1_key_desc_len));
+    if (!record.get()) return ErrorCode::UNKNOWN_ERROR;
+
+    *attestation_version = ASN1_INTEGER_get(record->attestation_version);
+    *attestation_security_level =
+            static_cast<SecurityLevel>(ASN1_ENUMERATED_get(record->attestation_security_level));
+    *keymint_version = ASN1_INTEGER_get(record->keymint_version);
+    *keymint_security_level =
+            static_cast<SecurityLevel>(ASN1_ENUMERATED_get(record->keymint_security_level));
+
+    auto& chall = record->attestation_challenge;
+    attestation_challenge->resize(chall->length);
+    memcpy(attestation_challenge->data(), chall->data, chall->length);
+    auto& uid = record->unique_id;
+    unique_id->resize(uid->length);
+    memcpy(unique_id->data(), uid->data, uid->length);
+
+    ErrorCode error = extract_auth_list(record->software_enforced, software_enforced);
+    if (error != ErrorCode::OK) return error;
+
+    return extract_auth_list(record->tee_enforced, tee_enforced);
+}
+
+ErrorCode parse_root_of_trust(const uint8_t* asn1_key_desc, size_t asn1_key_desc_len,
+                              vector<uint8_t>* verified_boot_key,
+                              keymint_verified_boot_t* verified_boot_state, bool* device_locked,
+                              vector<uint8_t>* verified_boot_hash) {
+    if (!verified_boot_key || !verified_boot_state || !device_locked || !verified_boot_hash) {
+        LOG(ERROR) << AT << "null pointer input(s)";
+        return ErrorCode::INVALID_ARGUMENT;
+    }
+    const uint8_t* p = asn1_key_desc;
+    KM_KEY_DESCRIPTION_Ptr record(d2i_KM_KEY_DESCRIPTION(nullptr, &p, asn1_key_desc_len));
+    if (!record.get()) {
+        LOG(ERROR) << AT << "Failed record parsing";
+        return ErrorCode::UNKNOWN_ERROR;
+    }
+
+    KM_ROOT_OF_TRUST* root_of_trust = nullptr;
+    if (record->tee_enforced && record->tee_enforced->root_of_trust) {
+        root_of_trust = record->tee_enforced->root_of_trust;
+    } else if (record->software_enforced && record->software_enforced->root_of_trust) {
+        root_of_trust = record->software_enforced->root_of_trust;
+    } else {
+        LOG(ERROR) << AT << " Failed root of trust parsing";
+        return ErrorCode::INVALID_ARGUMENT;
+    }
+    if (!root_of_trust->verified_boot_key) {
+        LOG(ERROR) << AT << " Failed verified boot key parsing";
+        return ErrorCode::INVALID_ARGUMENT;
+    }
+
+    auto& vb_key = root_of_trust->verified_boot_key;
+    verified_boot_key->resize(vb_key->length);
+    memcpy(verified_boot_key->data(), vb_key->data, vb_key->length);
+
+    *verified_boot_state = static_cast<keymint_verified_boot_t>(
+            ASN1_ENUMERATED_get(root_of_trust->verified_boot_state));
+    if (!verified_boot_state) {
+        LOG(ERROR) << AT << " Failed verified boot state parsing";
+        return ErrorCode::INVALID_ARGUMENT;
+    }
+
+    *device_locked = root_of_trust->device_locked;
+    if (!device_locked) {
+        LOG(ERROR) << AT << " Failed device locked parsing";
+        return ErrorCode::INVALID_ARGUMENT;
+    }
+
+    auto& vb_hash = root_of_trust->verified_boot_hash;
+    if (!vb_hash) {
+        LOG(ERROR) << AT << " Failed verified boot hash parsing";
+        return ErrorCode::INVALID_ARGUMENT;
+    }
+    verified_boot_hash->resize(vb_hash->length);
+    memcpy(verified_boot_hash->data(), vb_hash->data, vb_hash->length);
+    return ErrorCode::OK;  // KM_ERROR_OK;
+}
+
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
diff --git a/keymint/support/authorization_set.cpp b/keymint/support/authorization_set.cpp
new file mode 100644
index 0000000..9fc4e13
--- /dev/null
+++ b/keymint/support/authorization_set.cpp
@@ -0,0 +1,529 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <keymintSupport/authorization_set.h>
+
+#include <assert.h>
+
+#include <android-base/logging.h>
+#include <sstream>
+
+#include <android/hardware/keymint/Algorithm.h>
+#include <android/hardware/keymint/BlockMode.h>
+#include <android/hardware/keymint/Digest.h>
+#include <android/hardware/keymint/KeyParameter.h>
+#include <android/hardware/keymint/KeyPurpose.h>
+#include <android/hardware/keymint/TagType.h>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+void AuthorizationSet::Sort() {
+    std::sort(data_.begin(), data_.end());
+}
+
+void AuthorizationSet::Deduplicate() {
+    if (data_.empty()) return;
+
+    Sort();
+    std::vector<KeyParameter> result;
+
+    auto curr = data_.begin();
+    auto prev = curr++;
+    for (; curr != data_.end(); ++prev, ++curr) {
+        if (prev->tag == Tag::INVALID) continue;
+
+        if (*prev != *curr) {
+            result.push_back(std::move(*prev));
+        }
+    }
+    result.push_back(std::move(*prev));
+
+    std::swap(data_, result);
+}
+
+void AuthorizationSet::Union(const AuthorizationSet& other) {
+    data_.insert(data_.end(), other.data_.begin(), other.data_.end());
+    Deduplicate();
+}
+
+void AuthorizationSet::Subtract(const AuthorizationSet& other) {
+    Deduplicate();
+
+    auto i = other.begin();
+    while (i != other.end()) {
+        int pos = -1;
+        do {
+            pos = find(i->tag, pos);
+            if (pos != -1 && (*i == data_[pos])) {
+                data_.erase(data_.begin() + pos);
+                break;
+            }
+        } while (pos != -1);
+        ++i;
+    }
+}
+
+void AuthorizationSet::Filter(std::function<bool(const KeyParameter&)> doKeep) {
+    std::vector<KeyParameter> result;
+    for (auto& param : data_) {
+        if (doKeep(param)) {
+            result.push_back(std::move(param));
+        }
+    }
+    std::swap(data_, result);
+}
+
+KeyParameter& AuthorizationSet::operator[](int at) {
+    return data_[at];
+}
+
+const KeyParameter& AuthorizationSet::operator[](int at) const {
+    return data_[at];
+}
+
+void AuthorizationSet::Clear() {
+    data_.clear();
+}
+
+size_t AuthorizationSet::GetTagCount(Tag tag) const {
+    size_t count = 0;
+    for (int pos = -1; (pos = find(tag, pos)) != -1;) ++count;
+    return count;
+}
+
+int AuthorizationSet::find(Tag tag, int begin) const {
+    auto iter = data_.begin() + (1 + begin);
+
+    while (iter != data_.end() && iter->tag != tag) ++iter;
+
+    if (iter != data_.end()) return iter - data_.begin();
+    return -1;
+}
+
+bool AuthorizationSet::erase(int index) {
+    auto pos = data_.begin() + index;
+    if (pos != data_.end()) {
+        data_.erase(pos);
+        return true;
+    }
+    return false;
+}
+
+NullOr<const KeyParameter&> AuthorizationSet::GetEntry(Tag tag) const {
+    int pos = find(tag);
+    if (pos == -1) return {};
+    return data_[pos];
+}
+
+/**
+ * Persistent format is:
+ * | 32 bit indirect_size         |
+ * --------------------------------
+ * | indirect_size bytes of data  | this is where the blob data is stored
+ * --------------------------------
+ * | 32 bit element_count         | number of entries
+ * | 32 bit elements_size         | total bytes used by entries (entries have variable length)
+ * --------------------------------
+ * | elementes_size bytes of data | where the elements are stored
+ */
+
+/**
+ * Persistent format of blobs and bignums:
+ * | 32 bit tag             |
+ * | 32 bit blob_length     |
+ * | 32 bit indirect_offset |
+ */
+
+struct OutStreams {
+    std::ostream& indirect;
+    std::ostream& elements;
+    size_t skipped;
+};
+
+OutStreams& serializeParamValue(OutStreams& out, const vector<uint8_t>& blob) {
+    uint32_t buffer;
+
+    // write blob_length
+    auto blob_length = blob.size();
+    if (blob_length > std::numeric_limits<uint32_t>::max()) {
+        out.elements.setstate(std::ios_base::badbit);
+        return out;
+    }
+    buffer = blob_length;
+    out.elements.write(reinterpret_cast<const char*>(&buffer), sizeof(uint32_t));
+
+    // write indirect_offset
+    auto offset = out.indirect.tellp();
+    if (offset < 0 || offset > std::numeric_limits<uint32_t>::max() ||
+        uint32_t(offset) + uint32_t(blob_length) < uint32_t(offset)) {  // overflow check
+        out.elements.setstate(std::ios_base::badbit);
+        return out;
+    }
+    buffer = offset;
+    out.elements.write(reinterpret_cast<const char*>(&buffer), sizeof(uint32_t));
+
+    // write blob to indirect stream
+    if (blob_length) out.indirect.write(reinterpret_cast<const char*>(&blob[0]), blob_length);
+
+    return out;
+}
+
+template <typename T>
+OutStreams& serializeParamValue(OutStreams& out, const T& value) {
+    out.elements.write(reinterpret_cast<const char*>(&value), sizeof(T));
+    return out;
+}
+
+OutStreams& serialize(TAG_INVALID_t&&, OutStreams& out, const KeyParameter&) {
+    // skip invalid entries.
+    ++out.skipped;
+    return out;
+}
+template <typename T>
+OutStreams& serialize(T ttag, OutStreams& out, const KeyParameter& param) {
+    out.elements.write(reinterpret_cast<const char*>(&param.tag), sizeof(int32_t));
+    return serializeParamValue(out, accessTagValue(ttag, param));
+}
+
+template <typename... T>
+struct choose_serializer;
+template <typename... Tags>
+struct choose_serializer<MetaList<Tags...>> {
+    static OutStreams& serialize(OutStreams& out, const KeyParameter& param) {
+        return choose_serializer<Tags...>::serialize(out, param);
+    }
+};
+
+template <>
+struct choose_serializer<> {
+    static OutStreams& serialize(OutStreams& out, const KeyParameter& param) {
+        LOG(WARNING) << "Trying to serialize unknown tag " << unsigned(param.tag)
+                     << ". Did you forget to add it to all_tags_t?";
+        ++out.skipped;
+        return out;
+    }
+};
+
+template <TagType tag_type, Tag tag, typename... Tail>
+struct choose_serializer<android::hardware::keymint::TypedTag<tag_type, tag>, Tail...> {
+    static OutStreams& serialize(OutStreams& out, const KeyParameter& param) {
+        if (param.tag == tag) {
+            return android::hardware::keymint::serialize(TypedTag<tag_type, tag>(), out, param);
+        } else {
+            return choose_serializer<Tail...>::serialize(out, param);
+        }
+    }
+};
+
+OutStreams& serialize(OutStreams& out, const KeyParameter& param) {
+    return choose_serializer<all_tags_t>::serialize(out, param);
+}
+
+std::ostream& serialize(std::ostream& out, const std::vector<KeyParameter>& params) {
+    std::stringstream indirect;
+    std::stringstream elements;
+    OutStreams streams = {indirect, elements, 0};
+    for (const auto& param : params) {
+        serialize(streams, param);
+    }
+    if (indirect.bad() || elements.bad()) {
+        out.setstate(std::ios_base::badbit);
+        return out;
+    }
+    auto pos = indirect.tellp();
+    if (pos < 0 || pos > std::numeric_limits<uint32_t>::max()) {
+        out.setstate(std::ios_base::badbit);
+        return out;
+    }
+    uint32_t indirect_size = pos;
+    pos = elements.tellp();
+    if (pos < 0 || pos > std::numeric_limits<uint32_t>::max()) {
+        out.setstate(std::ios_base::badbit);
+        return out;
+    }
+    uint32_t elements_size = pos;
+    uint32_t element_count = params.size() - streams.skipped;
+
+    out.write(reinterpret_cast<const char*>(&indirect_size), sizeof(uint32_t));
+
+    pos = out.tellp();
+    if (indirect_size) out << indirect.rdbuf();
+    assert(out.tellp() - pos == indirect_size);
+
+    out.write(reinterpret_cast<const char*>(&element_count), sizeof(uint32_t));
+    out.write(reinterpret_cast<const char*>(&elements_size), sizeof(uint32_t));
+
+    pos = out.tellp();
+    if (elements_size) out << elements.rdbuf();
+    assert(out.tellp() - pos == elements_size);
+
+    return out;
+}
+
+struct InStreams {
+    std::istream& indirect;
+    std::istream& elements;
+    size_t invalids;
+};
+
+InStreams& deserializeParamValue(InStreams& in, vector<uint8_t>* blob) {
+    uint32_t blob_length = 0;
+    uint32_t offset = 0;
+    in.elements.read(reinterpret_cast<char*>(&blob_length), sizeof(uint32_t));
+    blob->resize(blob_length);
+    in.elements.read(reinterpret_cast<char*>(&offset), sizeof(uint32_t));
+    in.indirect.seekg(offset);
+    in.indirect.read(reinterpret_cast<char*>(&(*blob)[0]), blob->size());
+    return in;
+}
+
+template <typename T>
+InStreams& deserializeParamValue(InStreams& in, T* value) {
+    in.elements.read(reinterpret_cast<char*>(value), sizeof(T));
+    return in;
+}
+
+InStreams& deserialize(TAG_INVALID_t&&, InStreams& in, KeyParameter*) {
+    // there should be no invalid KeyParameters but if handle them as zero sized.
+    ++in.invalids;
+    return in;
+}
+
+template <typename T>
+InStreams& deserialize(T&& ttag, InStreams& in, KeyParameter* param) {
+    return deserializeParamValue(in, &accessTagValue(ttag, *param));
+}
+
+template <typename... T>
+struct choose_deserializer;
+template <typename... Tags>
+struct choose_deserializer<MetaList<Tags...>> {
+    static InStreams& deserialize(InStreams& in, KeyParameter* param) {
+        return choose_deserializer<Tags...>::deserialize(in, param);
+    }
+};
+template <>
+struct choose_deserializer<> {
+    static InStreams& deserialize(InStreams& in, KeyParameter*) {
+        // encountered an unknown tag -> fail parsing
+        in.elements.setstate(std::ios_base::badbit);
+        return in;
+    }
+};
+template <TagType tag_type, Tag tag, typename... Tail>
+struct choose_deserializer<TypedTag<tag_type, tag>, Tail...> {
+    static InStreams& deserialize(InStreams& in, KeyParameter* param) {
+        if (param->tag == tag) {
+            return android::hardware::keymint::deserialize(TypedTag<tag_type, tag>(), in, param);
+        } else {
+            return choose_deserializer<Tail...>::deserialize(in, param);
+        }
+    }
+};
+
+InStreams& deserialize(InStreams& in, KeyParameter* param) {
+    in.elements.read(reinterpret_cast<char*>(&param->tag), sizeof(Tag));
+    return choose_deserializer<all_tags_t>::deserialize(in, param);
+}
+
+std::istream& deserialize(std::istream& in, std::vector<KeyParameter>* params) {
+    uint32_t indirect_size = 0;
+    in.read(reinterpret_cast<char*>(&indirect_size), sizeof(uint32_t));
+    std::string indirect_buffer(indirect_size, '\0');
+    if (indirect_buffer.size() != indirect_size) {
+        in.setstate(std::ios_base::badbit);
+        return in;
+    }
+    in.read(&indirect_buffer[0], indirect_buffer.size());
+
+    uint32_t element_count = 0;
+    in.read(reinterpret_cast<char*>(&element_count), sizeof(uint32_t));
+    uint32_t elements_size = 0;
+    in.read(reinterpret_cast<char*>(&elements_size), sizeof(uint32_t));
+
+    std::string elements_buffer(elements_size, '\0');
+    if (elements_buffer.size() != elements_size) {
+        in.setstate(std::ios_base::badbit);
+        return in;
+    }
+    in.read(&elements_buffer[0], elements_buffer.size());
+
+    if (in.bad()) return in;
+
+    // TODO write one-shot stream buffer to avoid copying here
+    std::stringstream indirect(indirect_buffer);
+    std::stringstream elements(elements_buffer);
+    InStreams streams = {indirect, elements, 0};
+
+    params->resize(element_count);
+
+    for (uint32_t i = 0; i < element_count; ++i) {
+        deserialize(streams, &(*params)[i]);
+    }
+
+    /*
+     * There are legacy blobs which have invalid tags in them due to a bug during serialization.
+     * This makes sure that invalid tags are filtered from the result before it is returned.
+     */
+    if (streams.invalids > 0) {
+        std::vector<KeyParameter> filtered(element_count - streams.invalids);
+        auto ifiltered = filtered.begin();
+        for (auto& p : *params) {
+            if (p.tag != Tag::INVALID) {
+                *ifiltered++ = std::move(p);
+            }
+        }
+        *params = std::move(filtered);
+    }
+    return in;
+}
+
+void AuthorizationSet::Serialize(std::ostream* out) const {
+    serialize(*out, data_);
+}
+
+void AuthorizationSet::Deserialize(std::istream* in) {
+    deserialize(*in, &data_);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::RsaKey(uint32_t key_size,
+                                                         uint64_t public_exponent) {
+    Authorization(TAG_ALGORITHM, Algorithm::RSA);
+    Authorization(TAG_KEY_SIZE, key_size);
+    Authorization(TAG_RSA_PUBLIC_EXPONENT, public_exponent);
+    return *this;
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::EcdsaKey(uint32_t key_size) {
+    Authorization(TAG_ALGORITHM, Algorithm::EC);
+    Authorization(TAG_KEY_SIZE, key_size);
+    return *this;
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::EcdsaKey(EcCurve curve) {
+    Authorization(TAG_ALGORITHM, Algorithm::EC);
+    Authorization(TAG_EC_CURVE, curve);
+    return *this;
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::AesKey(uint32_t key_size) {
+    Authorization(TAG_ALGORITHM, Algorithm::AES);
+    return Authorization(TAG_KEY_SIZE, key_size);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::TripleDesKey(uint32_t key_size) {
+    Authorization(TAG_ALGORITHM, Algorithm::TRIPLE_DES);
+    return Authorization(TAG_KEY_SIZE, key_size);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::HmacKey(uint32_t key_size) {
+    Authorization(TAG_ALGORITHM, Algorithm::HMAC);
+    Authorization(TAG_KEY_SIZE, key_size);
+    return SigningKey();
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::RsaSigningKey(uint32_t key_size,
+                                                                uint64_t public_exponent) {
+    RsaKey(key_size, public_exponent);
+    return SigningKey();
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::RsaEncryptionKey(uint32_t key_size,
+                                                                   uint64_t public_exponent) {
+    RsaKey(key_size, public_exponent);
+    return EncryptionKey();
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::EcdsaSigningKey(uint32_t key_size) {
+    EcdsaKey(key_size);
+    return SigningKey();
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::EcdsaSigningKey(EcCurve curve) {
+    EcdsaKey(curve);
+    return SigningKey();
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::AesEncryptionKey(uint32_t key_size) {
+    AesKey(key_size);
+    return EncryptionKey();
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::TripleDesEncryptionKey(uint32_t key_size) {
+    TripleDesKey(key_size);
+    return EncryptionKey();
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::SigningKey() {
+    Authorization(TAG_PURPOSE, KeyPurpose::SIGN);
+    return Authorization(TAG_PURPOSE, KeyPurpose::VERIFY);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::EncryptionKey() {
+    Authorization(TAG_PURPOSE, KeyPurpose::ENCRYPT);
+    return Authorization(TAG_PURPOSE, KeyPurpose::DECRYPT);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::NoDigestOrPadding() {
+    Authorization(TAG_DIGEST, Digest::NONE);
+    return Authorization(TAG_PADDING, PaddingMode::NONE);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::EcbMode() {
+    return Authorization(TAG_BLOCK_MODE, BlockMode::ECB);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::GcmModeMinMacLen(uint32_t minMacLength) {
+    return BlockMode(BlockMode::GCM)
+            .Padding(PaddingMode::NONE)
+            .Authorization(TAG_MIN_MAC_LENGTH, minMacLength);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::GcmModeMacLen(uint32_t macLength) {
+    return BlockMode(BlockMode::GCM)
+            .Padding(PaddingMode::NONE)
+            .Authorization(TAG_MAC_LENGTH, macLength);
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::BlockMode(
+        std::initializer_list<android::hardware::keymint::BlockMode> blockModes) {
+    for (auto mode : blockModes) {
+        push_back(TAG_BLOCK_MODE, mode);
+    }
+    return *this;
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::Digest(
+        std::vector<android::hardware::keymint::Digest> digests) {
+    for (auto digest : digests) {
+        push_back(TAG_DIGEST, digest);
+    }
+    return *this;
+}
+
+AuthorizationSetBuilder& AuthorizationSetBuilder::Padding(
+        std::initializer_list<PaddingMode> paddingModes) {
+    for (auto paddingMode : paddingModes) {
+        push_back(TAG_PADDING, paddingMode);
+    }
+    return *this;
+}
+
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
diff --git a/keymint/support/include/keymintSupport/attestation_record.h b/keymint/support/include/keymintSupport/attestation_record.h
new file mode 100644
index 0000000..7a69789
--- /dev/null
+++ b/keymint/support/include/keymintSupport/attestation_record.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android/hardware/keymint/ErrorCode.h>
+#include <android/hardware/keymint/IKeyMintDevice.h>
+
+#include <keymintSupport/attestation_record.h>
+#include <keymintSupport/authorization_set.h>
+#include <keymintSupport/openssl_utils.h>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+using android::hardware::keymint::KeyParameter;
+using android::hardware::keymint::Tag;
+using android::hardware::keymint::TAG_ALGORITHM;
+
+class AuthorizationSet;
+
+/**
+ * The OID for Android attestation records.  For the curious, it breaks down as follows:
+ *
+ * 1 = ISO
+ * 3 = org
+ * 6 = DoD (Huh? OIDs are weird.)
+ * 1 = IANA
+ * 4 = Private
+ * 1 = Enterprises
+ * 11129 = Google
+ * 2 = Google security
+ * 1 = certificate extension
+ * 17 = Android attestation extension.
+ */
+static const char kAttestionRecordOid[] = "1.3.6.1.4.1.11129.2.1.17";
+
+enum keymint_verified_boot_t {
+    KM_VERIFIED_BOOT_VERIFIED = 0,
+    KM_VERIFIED_BOOT_SELF_SIGNED = 1,
+    KM_VERIFIED_BOOT_UNVERIFIED = 2,
+    KM_VERIFIED_BOOT_FAILED = 3,
+};
+
+struct RootOfTrust {
+    SecurityLevel security_level;
+    vector<uint8_t> verified_boot_key;
+    vector<uint8_t> verified_boot_hash;
+    keymint_verified_boot_t verified_boot_state;
+    bool device_locked;
+};
+
+struct AttestationRecord {
+    RootOfTrust root_of_trust;
+    uint32_t attestation_version;
+    SecurityLevel attestation_security_level;
+    uint32_t keymint_version;
+    SecurityLevel keymint_security_level;
+    std::vector<uint8_t> attestation_challenge;
+    AuthorizationSet software_enforced;
+    AuthorizationSet hardware_enforced;
+    std::vector<uint8_t> unique_id;
+};
+
+ErrorCode parse_attestation_record(const uint8_t* asn1_key_desc, size_t asn1_key_desc_len,
+                                   uint32_t* attestation_version,  //
+                                   SecurityLevel* attestation_security_level,
+                                   uint32_t* keymint_version, SecurityLevel* keymint_security_level,
+                                   std::vector<uint8_t>* attestation_challenge,
+                                   AuthorizationSet* software_enforced,
+                                   AuthorizationSet* tee_enforced,  //
+                                   std::vector<uint8_t>* unique_id);
+
+ErrorCode parse_root_of_trust(const uint8_t* asn1_key_desc, size_t asn1_key_desc_len,
+                              std::vector<uint8_t>* verified_boot_key,
+                              keymint_verified_boot_t* verified_boot_state, bool* device_locked,
+                              std::vector<uint8_t>* verified_boot_hash);
+
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
diff --git a/keymint/support/include/keymintSupport/authorization_set.h b/keymint/support/include/keymintSupport/authorization_set.h
new file mode 100644
index 0000000..141426a
--- /dev/null
+++ b/keymint/support/include/keymintSupport/authorization_set.h
@@ -0,0 +1,329 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_SECURITY_KEYSTORE_KM4_AUTHORIZATION_SET_H_
+#define SYSTEM_SECURITY_KEYSTORE_KM4_AUTHORIZATION_SET_H_
+
+#include <vector>
+
+#include <android/hardware/keymint/BlockMode.h>
+#include <android/hardware/keymint/Digest.h>
+#include <android/hardware/keymint/EcCurve.h>
+#include <android/hardware/keymint/PaddingMode.h>
+
+#include <keymintSupport/keymint_tags.h>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+using android::hardware::keymint::BlockMode;
+using android::hardware::keymint::Digest;
+using android::hardware::keymint::EcCurve;
+using android::hardware::keymint::PaddingMode;
+
+using std::vector;
+
+class AuthorizationSetBuilder;
+
+/**
+ * An ordered collection of KeyParameters. It provides memory ownership and some convenient
+ * functionality for sorting, deduplicating, joining, and subtracting sets of KeyParameters.
+ * For serialization, wrap the backing store of this structure in a vector<KeyParameter>.
+ */
+class AuthorizationSet {
+  public:
+    typedef KeyParameter value_type;
+
+    /**
+     * Construct an empty, dynamically-allocated, growable AuthorizationSet.
+     */
+    AuthorizationSet(){};
+
+    // Copy constructor.
+    AuthorizationSet(const AuthorizationSet& other) : data_(other.data_) {}
+
+    // Move constructor.
+    AuthorizationSet(AuthorizationSet&& other) noexcept : data_(std::move(other.data_)) {}
+
+    // Constructor from vector<KeyParameter>
+    AuthorizationSet(const vector<KeyParameter>& other) { *this = other; }
+
+    // Copy assignment.
+    AuthorizationSet& operator=(const AuthorizationSet& other) {
+        data_ = other.data_;
+        return *this;
+    }
+
+    // Move assignment.
+    AuthorizationSet& operator=(AuthorizationSet&& other) noexcept {
+        data_ = std::move(other.data_);
+        return *this;
+    }
+
+    AuthorizationSet& operator=(const vector<KeyParameter>& other) {
+        if (other.size() > 0) {
+            data_.resize(other.size());
+            for (size_t i = 0; i < data_.size(); ++i) {
+                /* This makes a deep copy even of embedded blobs.
+                 * See assignment operator/copy constructor of vector.*/
+                data_[i] = other[i];
+            }
+        }
+        return *this;
+    }
+
+    /**
+     * Clear existing authorization set data
+     */
+    void Clear();
+
+    ~AuthorizationSet() = default;
+
+    /**
+     * Returns the size of the set.
+     */
+    size_t size() const { return data_.size(); }
+
+    /**
+     * Returns true if the set is empty.
+     */
+    bool empty() const { return size() == 0; }
+
+    /**
+     * Returns the data in the set, directly. Be careful with this.
+     */
+    const KeyParameter* data() const { return data_.data(); }
+
+    /**
+     * Sorts the set
+     */
+    void Sort();
+
+    /**
+     * Sorts the set and removes duplicates (inadvertently duplicating tags is easy to do with the
+     * AuthorizationSetBuilder).
+     */
+    void Deduplicate();
+
+    /**
+     * Adds all elements from \p set that are not already present in this AuthorizationSet.  As a
+     * side-effect, if \p set is not null this AuthorizationSet will end up sorted.
+     */
+    void Union(const AuthorizationSet& set);
+
+    /**
+     * Removes all elements in \p set from this AuthorizationSet.
+     */
+    void Subtract(const AuthorizationSet& set);
+
+    /**
+     * Returns the offset of the next entry that matches \p tag, starting from the element after \p
+     * begin.  If not found, returns -1.
+     */
+    int find(Tag tag, int begin = -1) const;
+
+    /**
+     * Removes the entry at the specified index. Returns true if successful, false if the index was
+     * out of bounds.
+     */
+    bool erase(int index);
+
+    /**
+     * Returns iterator (pointer) to beginning of elems array, to enable STL-style iteration
+     */
+    std::vector<KeyParameter>::const_iterator begin() const { return data_.begin(); }
+
+    /**
+     * Returns iterator (pointer) one past end of elems array, to enable STL-style iteration
+     */
+    std::vector<KeyParameter>::const_iterator end() const { return data_.end(); }
+
+    /**
+     * Modifies this Authorization set such that it only keeps the entries for which doKeep
+     * returns true.
+     */
+    void Filter(std::function<bool(const KeyParameter&)> doKeep);
+    /**
+     * Returns the nth element of the set.
+     * Like for std::vector::operator[] there is no range check performed. Use of out of range
+     * indices is undefined.
+     */
+    KeyParameter& operator[](int n);
+
+    /**
+     * Returns the nth element of the set.
+     * Like for std::vector::operator[] there is no range check performed. Use of out of range
+     * indices is undefined.
+     */
+    const KeyParameter& operator[](int n) const;
+
+    /**
+     * Returns true if the set contains at least one instance of \p tag
+     */
+    bool Contains(Tag tag) const { return find(tag) != -1; }
+
+    template <TagType tag_type, Tag tag, typename ValueT>
+    bool Contains(TypedTag<tag_type, tag> ttag, const ValueT& value) const {
+        for (const auto& param : data_) {
+            auto entry = authorizationValue(ttag, param);
+            if (entry.isOk() && static_cast<ValueT>(entry.value()) == value) return true;
+        }
+        return false;
+    }
+    /**
+     * Returns the number of \p tag entries.
+     */
+    size_t GetTagCount(Tag tag) const;
+
+    template <typename T>
+    inline NullOr<const typename TypedTag2ValueType<T>::type&> GetTagValue(T tag) const {
+        auto entry = GetEntry(tag);
+        if (entry.isOk()) return authorizationValue(tag, entry.value());
+        return {};
+    }
+
+    void push_back(const KeyParameter& param) { data_.push_back(param); }
+    void push_back(KeyParameter&& param) { data_.push_back(std::move(param)); }
+    void push_back(const AuthorizationSet& set) {
+        for (auto& entry : set) {
+            push_back(entry);
+        }
+    }
+    void push_back(AuthorizationSet&& set) {
+        std::move(set.begin(), set.end(), std::back_inserter(*this));
+    }
+
+    /**
+     * Append the tag and enumerated value to the set.
+     * "val" may be exactly one parameter unless a boolean parameter is added.
+     * In this case "val" is omitted. This condition is checked at compile time by Authorization()
+     */
+    template <typename TypedTagT, typename... Value>
+    void push_back(TypedTagT tag, Value&&... val) {
+        push_back(Authorization(tag, std::forward<Value>(val)...));
+    }
+
+    template <typename Iterator>
+    void append(Iterator begin, Iterator end) {
+        while (begin != end) {
+            push_back(*begin);
+            ++begin;
+        }
+    }
+
+    vector<KeyParameter> vector_data() const {
+        vector<KeyParameter> result(begin(), end());
+        return result;
+    }
+
+    void Serialize(std::ostream* out) const;
+    void Deserialize(std::istream* in);
+
+  private:
+    NullOr<const KeyParameter&> GetEntry(Tag tag) const;
+
+    std::vector<KeyParameter> data_;
+};
+
+class AuthorizationSetBuilder : public AuthorizationSet {
+  public:
+    template <typename TagType, typename... ValueType>
+    AuthorizationSetBuilder& Authorization(TagType ttag, ValueType&&... value) {
+        push_back(ttag, std::forward<ValueType>(value)...);
+        return *this;
+    }
+
+    template <Tag tag>
+    AuthorizationSetBuilder& Authorization(TypedTag<TagType::BYTES, tag> ttag, const uint8_t* data,
+                                           size_t data_length) {
+        vector<uint8_t> new_blob(data, data + data_length);
+        push_back(ttag, new_blob);
+        return *this;
+    }
+
+    template <Tag tag>
+    AuthorizationSetBuilder& Authorization(TypedTag<TagType::BYTES, tag> ttag, const char* data,
+                                           size_t data_length) {
+        return Authorization(ttag, reinterpret_cast<const uint8_t*>(data), data_length);
+    }
+
+    template <Tag tag>
+    AuthorizationSetBuilder& Authorization(TypedTag<TagType::BYTES, tag> ttag, char* data,
+                                           size_t data_length) {
+        return Authorization(ttag, reinterpret_cast<const uint8_t*>(data), data_length);
+    }
+
+    template <Tag tag, size_t size>
+    AuthorizationSetBuilder& Authorization(TypedTag<TagType::BYTES, tag> ttag,
+                                           const char (&data)[size]) {
+        return Authorization(ttag, reinterpret_cast<const uint8_t*>(&data[0]),
+                             size - 1);  // drop the terminating '\0'
+    }
+
+    AuthorizationSetBuilder& Authorizations(const AuthorizationSet& set) {
+        for (const auto& entry : set) {
+            push_back(entry);
+        }
+        return *this;
+    }
+
+    AuthorizationSetBuilder& RsaKey(uint32_t key_size, uint64_t public_exponent);
+    AuthorizationSetBuilder& EcdsaKey(uint32_t key_size);
+    AuthorizationSetBuilder& EcdsaKey(EcCurve curve);
+    AuthorizationSetBuilder& AesKey(uint32_t key_size);
+    AuthorizationSetBuilder& TripleDesKey(uint32_t key_size);
+    AuthorizationSetBuilder& HmacKey(uint32_t key_size);
+
+    AuthorizationSetBuilder& RsaSigningKey(uint32_t key_size, uint64_t public_exponent);
+    AuthorizationSetBuilder& RsaEncryptionKey(uint32_t key_size, uint64_t public_exponent);
+    AuthorizationSetBuilder& EcdsaSigningKey(uint32_t key_size);
+    AuthorizationSetBuilder& EcdsaSigningKey(EcCurve curve);
+    AuthorizationSetBuilder& AesEncryptionKey(uint32_t key_size);
+    AuthorizationSetBuilder& TripleDesEncryptionKey(uint32_t key_size);
+
+    AuthorizationSetBuilder& SigningKey();
+    AuthorizationSetBuilder& EncryptionKey();
+
+    AuthorizationSetBuilder& NoDigestOrPadding();
+
+    AuthorizationSetBuilder& EcbMode();
+    AuthorizationSetBuilder& GcmModeMinMacLen(uint32_t minMacLength);
+    AuthorizationSetBuilder& GcmModeMacLen(uint32_t macLength);
+
+    AuthorizationSetBuilder& BlockMode(std::initializer_list<BlockMode> blockModes);
+    AuthorizationSetBuilder& Digest(std::vector<Digest> digests);
+    AuthorizationSetBuilder& Padding(std::initializer_list<PaddingMode> paddings);
+
+    template <typename... T>
+    AuthorizationSetBuilder& BlockMode(T&&... a) {
+        return BlockMode({std::forward<T>(a)...});
+    }
+    template <typename... T>
+    AuthorizationSetBuilder& Digest(T&&... a) {
+        return Digest({std::forward<T>(a)...});
+    }
+    template <typename... T>
+    AuthorizationSetBuilder& Padding(T&&... a) {
+        return Padding({std::forward<T>(a)...});
+    }
+};
+
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
+
+#endif  // SYSTEM_SECURITY_KEYSTORE_KM4_AUTHORIZATION_SET_H_
diff --git a/keymint/support/include/keymintSupport/key_param_output.h b/keymint/support/include/keymintSupport/key_param_output.h
new file mode 100644
index 0000000..a35a981
--- /dev/null
+++ b/keymint/support/include/keymintSupport/key_param_output.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2017 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HARDWARE_INTERFACES_KEYMINT_SUPPORT_INCLUDE_KEY_PARAM_OUTPUT_H_
+#define HARDWARE_INTERFACES_KEYMINT_SUPPORT_INCLUDE_KEY_PARAM_OUTPUT_H_
+
+#include <iostream>
+#include <vector>
+
+#include "keymint_tags.h"
+
+#include <android/hardware/keymint/Algorithm.h>
+#include <android/hardware/keymint/BlockMode.h>
+#include <android/hardware/keymint/Digest.h>
+#include <android/hardware/keymint/EcCurve.h>
+#include <android/hardware/keymint/ErrorCode.h>
+#include <android/hardware/keymint/HardwareAuthenticatorType.h>
+#include <android/hardware/keymint/KeyCharacteristics.h>
+#include <android/hardware/keymint/KeyOrigin.h>
+#include <android/hardware/keymint/KeyParameter.h>
+#include <android/hardware/keymint/KeyPurpose.h>
+#include <android/hardware/keymint/PaddingMode.h>
+#include <android/hardware/keymint/SecurityLevel.h>
+#include <android/hardware/keymint/Tag.h>
+#include <android/hardware/keymint/TagType.h>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+using namespace ::android::hardware::keymint;
+
+inline ::std::ostream& operator<<(::std::ostream& os, Algorithm value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, BlockMode value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, Digest value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, EcCurve value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, ErrorCode value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, KeyOrigin value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, PaddingMode value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, SecurityLevel value) {
+    return os << toString(value);
+}
+
+template <typename ValueT>
+::std::ostream& operator<<(::std::ostream& os, const NullOr<ValueT>& value) {
+    if (!value.isOk()) {
+        os << "(value not present)";
+    } else {
+        os << value.value();
+    }
+    return os;
+}
+
+::std::ostream& operator<<(::std::ostream& os, const ::std::vector<KeyParameter>& set);
+::std::ostream& operator<<(::std::ostream& os, const KeyParameter& param);
+
+inline ::std::ostream& operator<<(::std::ostream& os, const KeyCharacteristics& value) {
+    return os << "SW: " << value.softwareEnforced << ::std::endl
+              << "HW: " << value.hardwareEnforced << ::std::endl;
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, KeyPurpose value) {
+    return os << toString(value);
+}
+
+inline ::std::ostream& operator<<(::std::ostream& os, Tag tag) {
+    return os << toString(tag);
+}
+
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HARDWARE_INTERFACES_KEYMINT_SUPPORT_INCLUDE_KEY_PARAM_OUTPUT_H_
diff --git a/keymint/support/include/keymintSupport/keymint_tags.h b/keymint/support/include/keymintSupport/keymint_tags.h
new file mode 100644
index 0000000..f1060a9
--- /dev/null
+++ b/keymint/support/include/keymintSupport/keymint_tags.h
@@ -0,0 +1,414 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HARDWARE_INTERFACES_KEYMINT_SUPPORT_INCLUDE_KEYMINT_TAGS_H_
+#define HARDWARE_INTERFACES_KEYMINT_SUPPORT_INCLUDE_KEYMINT_TAGS_H_
+
+#include <android/hardware/keymint/Algorithm.h>
+#include <android/hardware/keymint/BlockMode.h>
+#include <android/hardware/keymint/Digest.h>
+#include <android/hardware/keymint/EcCurve.h>
+#include <android/hardware/keymint/HardwareAuthenticatorType.h>
+#include <android/hardware/keymint/KeyOrigin.h>
+#include <android/hardware/keymint/KeyParameter.h>
+#include <android/hardware/keymint/KeyPurpose.h>
+#include <android/hardware/keymint/PaddingMode.h>
+#include <android/hardware/keymint/SecurityLevel.h>
+#include <android/hardware/keymint/Tag.h>
+#include <android/hardware/keymint/TagType.h>
+
+namespace android::hardware::keymint {
+
+using android::hardware::keymint::KeyParameter;
+using android::hardware::keymint::Tag;
+using android::hardware::keymint::TagType;
+
+// The following create the numeric values that KM_TAG_PADDING and KM_TAG_DIGEST used to have.  We
+// need these old values to be able to support old keys that use them.
+// TODO(seleneh) we should delete this code when we stop supporting keymaster1
+// and deletes it.
+static const int32_t KM_TAG_DIGEST_OLD = static_cast<int32_t>(TagType::ENUM) | 5;
+static const int32_t KM_TAG_PADDING_OLD = static_cast<int32_t>(TagType::ENUM) | 7;
+
+constexpr TagType typeFromTag(Tag tag) {
+    return static_cast<TagType>(static_cast<uint32_t>(tag) & static_cast<uint32_t>(0xf0000000));
+}
+
+/**
+ * TypedTag is a templatized version of Tag, which provides compile-time checking of
+ * keymint tag types. Instances are convertible to Tag, so they can be used wherever
+ * Tag is expected, and because they encode the tag type it's possible to create
+ * function overloads that only operate on tags with a particular type.
+ */
+template <TagType tag_type, Tag tag>
+struct TypedTag {
+    inline TypedTag() {
+        // Ensure that it's impossible to create a TypedTag instance whose 'tag' doesn't have type
+        // 'tag_type'.  Attempting to instantiate a tag with the wrong type will result in a compile
+        // error (no match for template specialization StaticAssert<false>), with no run-time cost.
+        static_assert(typeFromTag(tag) == tag_type, "mismatch between tag and tag_type");
+    }
+    operator Tag() const { return tag; }
+    int32_t maskedTag() { return static_cast<uint32_t>(tag) & 0x0FFFFFFF; }
+};
+
+template <Tag tag>
+struct Tag2TypedTag {
+    typedef TypedTag<typeFromTag(tag), tag> type;
+};
+
+#define DECLARE_TYPED_TAG(name)                                    \
+    typedef typename Tag2TypedTag<Tag::name>::type TAG_##name##_t; \
+    static TAG_##name##_t TAG_##name;
+
+DECLARE_TYPED_TAG(ACTIVE_DATETIME);
+DECLARE_TYPED_TAG(ALGORITHM);
+DECLARE_TYPED_TAG(ALLOW_WHILE_ON_BODY);
+DECLARE_TYPED_TAG(APPLICATION_DATA);
+DECLARE_TYPED_TAG(APPLICATION_ID);
+DECLARE_TYPED_TAG(ASSOCIATED_DATA);
+DECLARE_TYPED_TAG(ATTESTATION_APPLICATION_ID);
+DECLARE_TYPED_TAG(ATTESTATION_CHALLENGE);
+DECLARE_TYPED_TAG(ATTESTATION_ID_BRAND);
+DECLARE_TYPED_TAG(ATTESTATION_ID_DEVICE);
+DECLARE_TYPED_TAG(ATTESTATION_ID_PRODUCT);
+DECLARE_TYPED_TAG(ATTESTATION_ID_MANUFACTURER);
+DECLARE_TYPED_TAG(ATTESTATION_ID_MODEL);
+DECLARE_TYPED_TAG(AUTH_TIMEOUT);
+DECLARE_TYPED_TAG(BLOCK_MODE);
+DECLARE_TYPED_TAG(BOOTLOADER_ONLY);
+DECLARE_TYPED_TAG(BOOT_PATCHLEVEL);
+DECLARE_TYPED_TAG(CALLER_NONCE);
+DECLARE_TYPED_TAG(CONFIRMATION_TOKEN);
+DECLARE_TYPED_TAG(CREATION_DATETIME);
+DECLARE_TYPED_TAG(DEVICE_UNIQUE_ATTESTATION);
+DECLARE_TYPED_TAG(DIGEST);
+DECLARE_TYPED_TAG(EARLY_BOOT_ONLY);
+DECLARE_TYPED_TAG(EC_CURVE);
+DECLARE_TYPED_TAG(HARDWARE_TYPE);
+DECLARE_TYPED_TAG(IDENTITY_CREDENTIAL_KEY);
+DECLARE_TYPED_TAG(INCLUDE_UNIQUE_ID);
+DECLARE_TYPED_TAG(INVALID);
+DECLARE_TYPED_TAG(KEY_SIZE);
+DECLARE_TYPED_TAG(MAC_LENGTH);
+DECLARE_TYPED_TAG(MAX_USES_PER_BOOT);
+DECLARE_TYPED_TAG(MIN_MAC_LENGTH);
+DECLARE_TYPED_TAG(MIN_SECONDS_BETWEEN_OPS);
+DECLARE_TYPED_TAG(NONCE);
+DECLARE_TYPED_TAG(NO_AUTH_REQUIRED);
+DECLARE_TYPED_TAG(ORIGIN);
+DECLARE_TYPED_TAG(ORIGINATION_EXPIRE_DATETIME);
+DECLARE_TYPED_TAG(OS_PATCHLEVEL);
+DECLARE_TYPED_TAG(OS_VERSION);
+DECLARE_TYPED_TAG(PADDING);
+DECLARE_TYPED_TAG(PURPOSE);
+DECLARE_TYPED_TAG(RESET_SINCE_ID_ROTATION);
+DECLARE_TYPED_TAG(ROLLBACK_RESISTANCE);
+DECLARE_TYPED_TAG(ROOT_OF_TRUST);
+DECLARE_TYPED_TAG(RSA_PUBLIC_EXPONENT);
+DECLARE_TYPED_TAG(STORAGE_KEY);
+DECLARE_TYPED_TAG(TRUSTED_CONFIRMATION_REQUIRED);
+DECLARE_TYPED_TAG(TRUSTED_USER_PRESENCE_REQUIRED);
+DECLARE_TYPED_TAG(UNIQUE_ID);
+DECLARE_TYPED_TAG(UNLOCKED_DEVICE_REQUIRED);
+DECLARE_TYPED_TAG(USAGE_EXPIRE_DATETIME);
+DECLARE_TYPED_TAG(USER_AUTH_TYPE);
+DECLARE_TYPED_TAG(USER_ID);
+DECLARE_TYPED_TAG(USER_SECURE_ID);
+DECLARE_TYPED_TAG(VENDOR_PATCHLEVEL);
+
+template <typename... Elems>
+struct MetaList {};
+
+using all_tags_t = MetaList<
+        TAG_INVALID_t, TAG_KEY_SIZE_t, TAG_MAC_LENGTH_t, TAG_CALLER_NONCE_t, TAG_MIN_MAC_LENGTH_t,
+        TAG_RSA_PUBLIC_EXPONENT_t, TAG_INCLUDE_UNIQUE_ID_t, TAG_ACTIVE_DATETIME_t,
+        TAG_ORIGINATION_EXPIRE_DATETIME_t, TAG_USAGE_EXPIRE_DATETIME_t,
+        TAG_MIN_SECONDS_BETWEEN_OPS_t, TAG_MAX_USES_PER_BOOT_t, TAG_USER_ID_t, TAG_USER_SECURE_ID_t,
+        TAG_NO_AUTH_REQUIRED_t, TAG_AUTH_TIMEOUT_t, TAG_ALLOW_WHILE_ON_BODY_t,
+        TAG_UNLOCKED_DEVICE_REQUIRED_t, TAG_APPLICATION_ID_t, TAG_APPLICATION_DATA_t,
+        TAG_CREATION_DATETIME_t, TAG_ROLLBACK_RESISTANCE_t, TAG_HARDWARE_TYPE_t,
+        TAG_ROOT_OF_TRUST_t, TAG_ASSOCIATED_DATA_t, TAG_NONCE_t, TAG_BOOTLOADER_ONLY_t,
+        TAG_OS_VERSION_t, TAG_OS_PATCHLEVEL_t, TAG_UNIQUE_ID_t, TAG_ATTESTATION_CHALLENGE_t,
+        TAG_ATTESTATION_APPLICATION_ID_t, TAG_ATTESTATION_ID_BRAND_t, TAG_ATTESTATION_ID_DEVICE_t,
+        TAG_ATTESTATION_ID_PRODUCT_t, TAG_ATTESTATION_ID_MANUFACTURER_t, TAG_ATTESTATION_ID_MODEL_t,
+        TAG_RESET_SINCE_ID_ROTATION_t, TAG_PURPOSE_t, TAG_ALGORITHM_t, TAG_BLOCK_MODE_t,
+        TAG_DIGEST_t, TAG_PADDING_t, TAG_ORIGIN_t, TAG_USER_AUTH_TYPE_t, TAG_EC_CURVE_t,
+        TAG_BOOT_PATCHLEVEL_t, TAG_VENDOR_PATCHLEVEL_t, TAG_TRUSTED_CONFIRMATION_REQUIRED_t,
+        TAG_TRUSTED_USER_PRESENCE_REQUIRED_t>;
+
+template <typename TypedTagType>
+struct TypedTag2ValueType;
+
+#define MAKE_TAG_VALUE_ACCESSOR(tag_type, field_name)                              \
+    template <Tag tag>                                                             \
+    struct TypedTag2ValueType<TypedTag<tag_type, tag>> {                           \
+        typedef decltype(static_cast<KeyParameter*>(nullptr)->field_name) type;    \
+    };                                                                             \
+    template <Tag tag>                                                             \
+    inline auto accessTagValue(TypedTag<tag_type, tag>, const KeyParameter& param) \
+            ->const decltype(param.field_name)& {                                  \
+        return param.field_name;                                                   \
+    }                                                                              \
+    template <Tag tag>                                                             \
+    inline auto accessTagValue(TypedTag<tag_type, tag>, KeyParameter& param)       \
+            ->decltype(param.field_name)& {                                        \
+        return param.field_name;                                                   \
+    }
+
+MAKE_TAG_VALUE_ACCESSOR(TagType::ULONG, longInteger)
+MAKE_TAG_VALUE_ACCESSOR(TagType::ULONG_REP, longInteger)
+MAKE_TAG_VALUE_ACCESSOR(TagType::DATE, longInteger)
+MAKE_TAG_VALUE_ACCESSOR(TagType::UINT, integer)
+MAKE_TAG_VALUE_ACCESSOR(TagType::UINT_REP, integer)
+MAKE_TAG_VALUE_ACCESSOR(TagType::BOOL, boolValue)
+MAKE_TAG_VALUE_ACCESSOR(TagType::BYTES, blob)
+MAKE_TAG_VALUE_ACCESSOR(TagType::BIGNUM, blob)
+
+//  TODO(seleneh) change these MAKE_TAG_ENUM_VALUE_ACCESSOR back to the 2 parameter
+//  version when aidl supports union
+#define MAKE_TAG_ENUM_VALUE_ACCESSOR(typed_tag, field_name, field_type)                 \
+    template <>                                                                         \
+    struct TypedTag2ValueType<decltype(typed_tag)> {                                    \
+        typedef field_type type;                                                        \
+    };                                                                                  \
+    inline auto accessTagValue(decltype(typed_tag), const KeyParameter& param)          \
+            ->const field_type& {                                                       \
+        return *reinterpret_cast<const field_type*>(&param.field_name);                 \
+    }                                                                                   \
+    inline auto accessTagValue(decltype(typed_tag), KeyParameter& param)->field_type& { \
+        return *reinterpret_cast<field_type*>(&param.field_name);                       \
+    }
+
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_ALGORITHM, integer, Algorithm)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_BLOCK_MODE, integer, BlockMode)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_DIGEST, integer, Digest)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_EC_CURVE, integer, EcCurve)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_ORIGIN, integer, KeyOrigin)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_PADDING, integer, PaddingMode)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_PURPOSE, integer, KeyPurpose)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_USER_AUTH_TYPE, integer, HardwareAuthenticatorType)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_HARDWARE_TYPE, integer, SecurityLevel)
+
+template <TagType tag_type, Tag tag, typename ValueT>
+inline KeyParameter makeKeyParameter(TypedTag<tag_type, tag> ttag, ValueT&& value) {
+    KeyParameter param;
+    param.tag = tag;
+    param.longInteger = 0;
+    accessTagValue(ttag, param) = std::forward<ValueT>(value);
+    return param;
+}
+
+// the boolean case
+template <Tag tag>
+inline KeyParameter makeKeyParameter(TypedTag<TagType::BOOL, tag>) {
+    KeyParameter param;
+    param.tag = tag;
+    param.boolValue = true;
+    return param;
+}
+
+template <typename... Pack>
+struct FirstOrNoneHelper;
+template <typename First>
+struct FirstOrNoneHelper<First> {
+    typedef First type;
+};
+template <>
+struct FirstOrNoneHelper<> {
+    struct type {};
+};
+
+template <typename... Pack>
+using FirstOrNone = typename FirstOrNoneHelper<Pack...>::type;
+
+template <TagType tag_type, Tag tag, typename... Args>
+inline KeyParameter Authorization(TypedTag<tag_type, tag> ttag, Args&&... args) {
+    static_assert(tag_type != TagType::BOOL || (sizeof...(args) == 0),
+                  "TagType::BOOL Authorizations do not take parameters. Presence is truth.");
+    static_assert(tag_type == TagType::BOOL || (sizeof...(args) == 1),
+                  "Authorization other then TagType::BOOL take exactly one parameter.");
+    static_assert(
+            tag_type == TagType::BOOL ||
+                    std::is_convertible<
+                            std::remove_cv_t<std::remove_reference_t<FirstOrNone<Args...>>>,
+                            typename TypedTag2ValueType<TypedTag<tag_type, tag>>::type>::value,
+            "Invalid argument type for given tag.");
+
+    return makeKeyParameter(ttag, std::forward<Args>(args)...);
+}
+
+/**
+ * This class wraps a (mostly return) value and stores whether or not the wrapped value is valid out
+ * of band. Note that if the wrapped value is a reference it is unsafe to access the value if
+ * !isOk(). If the wrapped type is a pointer or value and !isOk(), it is still safe to access the
+ * wrapped value. In this case the pointer will be NULL though, and the value will be default
+ * constructed.
+ *
+ * TODO(seleneh) replace this with std::optional.
+ */
+template <typename ValueT>
+class NullOr {
+    using internal_t = std::conditional_t<std::is_lvalue_reference<ValueT>::value,
+                                          std::remove_reference_t<ValueT>*, ValueT>;
+
+    struct pointer_initializer {
+        static std::nullptr_t init() { return nullptr; }
+    };
+    struct value_initializer {
+        static ValueT init() { return ValueT(); }
+    };
+    struct value_pointer_deref_t {
+        static ValueT& deref(ValueT& v) { return v; }
+    };
+    struct reference_deref_t {
+        static auto& deref(internal_t v) { return *v; }
+    };
+    using initializer_t = std::conditional_t<std::is_lvalue_reference<ValueT>::value ||
+                                                     std::is_pointer<ValueT>::value,
+                                             pointer_initializer, value_initializer>;
+    using deref_t = std::conditional_t<std::is_lvalue_reference<ValueT>::value, reference_deref_t,
+                                       value_pointer_deref_t>;
+
+  public:
+    NullOr() : value_(initializer_t::init()), null_(true) {}
+    template <typename T>
+    NullOr(T&& value, typename std::enable_if<
+                              !std::is_lvalue_reference<ValueT>::value &&
+                                      std::is_same<std::decay_t<ValueT>, std::decay_t<T>>::value,
+                              int>::type = 0)
+        : value_(std::forward<ValueT>(value)), null_(false) {}
+    template <typename T>
+    NullOr(T& value, typename std::enable_if<
+                             std::is_lvalue_reference<ValueT>::value &&
+                                     std::is_same<std::decay_t<ValueT>, std::decay_t<T>>::value,
+                             int>::type = 0)
+        : value_(&value), null_(false) {}
+
+    bool isOk() const { return !null_; }
+
+    const ValueT& value() const& { return deref_t::deref(value_); }
+    ValueT& value() & { return deref_t::deref(value_); }
+    ValueT&& value() && { return std::move(deref_t::deref(value_)); }
+
+  private:
+    internal_t value_;
+    bool null_;
+};
+
+template <typename T>
+std::remove_reference_t<T> NullOrOr(T&& v) {
+    if (v.isOk()) return v;
+    return {};
+}
+
+template <typename Head, typename... Tail>
+std::remove_reference_t<Head> NullOrOr(Head&& head, Tail&&... tail) {
+    if (head.isOk()) return head;
+    return NullOrOr(std::forward<Tail>(tail)...);
+}
+
+template <typename Default, typename Wrapped>
+std::remove_reference_t<Wrapped> defaultOr(NullOr<Wrapped>&& optional, Default&& def) {
+    static_assert(std::is_convertible<std::remove_reference_t<Default>,
+                                      std::remove_reference_t<Wrapped>>::value,
+                  "Type of default value must match the type wrapped by NullOr");
+    if (optional.isOk()) return optional.value();
+    return def;
+}
+
+template <TagType tag_type, Tag tag>
+inline NullOr<const typename TypedTag2ValueType<TypedTag<tag_type, tag>>::type&> authorizationValue(
+        TypedTag<tag_type, tag> ttag, const KeyParameter& param) {
+    if (tag != param.tag) return {};
+    return accessTagValue(ttag, param);
+}
+
+}  // namespace android::hardware::keymint
+
+namespace std {
+
+using namespace android::hardware::keymint;
+
+// Aidl generates KeyParameter operator<, >, ==, != for cpp translation but not ndk
+// translations.  So we cannot straight forward overload these operators.
+// However we need our custom comparison for KeyParameters.  So we will
+// overload std::less, equal_to instead.
+template <>
+struct std::less<KeyParameter> {
+    bool operator()(const KeyParameter& a, const KeyParameter& b) const {
+        if (a.tag != b.tag) return a.tag < b.tag;
+        int retval;
+        switch (typeFromTag(a.tag)) {
+            case TagType::INVALID:
+            case TagType::BOOL:
+                return false;
+            case TagType::ENUM:
+            case TagType::ENUM_REP:
+            case TagType::UINT:
+            case TagType::UINT_REP:
+                return a.integer < b.integer;
+            case TagType::ULONG:
+            case TagType::ULONG_REP:
+            case TagType::DATE:
+                return a.longInteger < b.longInteger;
+            case TagType::BIGNUM:
+            case TagType::BYTES:
+                // Handle the empty cases.
+                if (a.blob.size() == 0) return b.blob.size() != 0;
+                if (b.blob.size() == 0) return false;
+                retval = memcmp(&a.blob[0], &b.blob[0], std::min(a.blob.size(), b.blob.size()));
+                // if one is the prefix of the other the longer wins
+                if (retval == 0) return a.blob.size() < b.blob.size();
+                // Otherwise a is less if a is less.
+                else
+                    return retval < 0;
+        }
+        return false;
+    }
+};
+
+template <>
+struct std::equal_to<KeyParameter> {
+    bool operator()(const KeyParameter& a, const KeyParameter& b) const {
+        if (a.tag != b.tag) {
+            return false;
+        }
+        switch (typeFromTag(a.tag)) {
+            case TagType::INVALID:
+            case TagType::BOOL:
+                return true;
+            case TagType::ENUM:
+            case TagType::ENUM_REP:
+            case TagType::UINT:
+            case TagType::UINT_REP:
+                return a.integer == b.integer;
+            case TagType::ULONG:
+            case TagType::ULONG_REP:
+            case TagType::DATE:
+                return a.longInteger == b.longInteger;
+            case TagType::BIGNUM:
+            case TagType::BYTES:
+                if (a.blob.size() != b.blob.size()) return false;
+                return a.blob.size() == 0 || memcmp(&a.blob[0], &b.blob[0], a.blob.size()) == 0;
+        }
+        return false;
+    }
+};
+
+}  // namespace std
+
+#endif  // HARDWARE_INTERFACES_KEYMINT_SUPPORT_INCLUDE_KEYMINT_TAGS_H_
diff --git a/keymint/support/include/keymintSupport/keymint_utils.h b/keymint/support/include/keymintSupport/keymint_utils.h
new file mode 100644
index 0000000..aa1e93b
--- /dev/null
+++ b/keymint/support/include/keymintSupport/keymint_utils.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#ifndef HARDWARE_INTERFACES_KEYMINT_10_SUPPORT_KEYMINT_UTILS_H_
+#define HARDWARE_INTERFACES_KEYMINT_10_SUPPORT_KEYMINT_UTILS_H_
+
+#include <android/hardware/keymint/HardwareAuthToken.h>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+using std::vector;
+
+inline static std::vector<uint8_t> blob2vector(const uint8_t* data, const size_t length) {
+    std::vector<uint8_t> result(data, data + length);
+    return result;
+}
+
+inline static std::vector<uint8_t> blob2vector(const std::string& value) {
+    vector<uint8_t> result(reinterpret_cast<const uint8_t*>(value.data()),
+                           reinterpret_cast<const uint8_t*>(value.data()) + value.size());
+    return result;
+}
+
+HardwareAuthToken vector2AuthToken(const vector<uint8_t>& buffer);
+vector<uint8_t> authToken2vector(const HardwareAuthToken& token);
+
+uint32_t getOsVersion();
+uint32_t getOsPatchlevel();
+
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HARDWARE_INTERFACES_KEYMINT_10_SUPPORT_KEYMINT_UTILS_H_
diff --git a/keymint/support/include/keymintSupport/openssl_utils.h b/keymint/support/include/keymintSupport/openssl_utils.h
new file mode 100644
index 0000000..39633ed
--- /dev/null
+++ b/keymint/support/include/keymintSupport/openssl_utils.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2017 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef HARDWARE_INTERFACES_KEYMINT_1_0_SUPPORT_OPENSSL_UTILS_H_
+#define HARDWARE_INTERFACES_KEYMINT_1_0_SUPPORT_OPENSSL_UTILS_H_
+
+#include <android/hardware/keymint/Digest.h>
+
+#include <openssl/evp.h>
+#include <openssl/x509.h>
+
+template <typename T, void (*F)(T*)>
+struct UniquePtrDeleter {
+    void operator()(T* p) const { F(p); }
+};
+
+typedef UniquePtrDeleter<EVP_PKEY, EVP_PKEY_free> EVP_PKEY_Delete;
+
+#define MAKE_OPENSSL_PTR_TYPE(type) \
+    typedef std::unique_ptr<type, UniquePtrDeleter<type, type##_free>> type##_Ptr;
+
+MAKE_OPENSSL_PTR_TYPE(ASN1_OBJECT)
+MAKE_OPENSSL_PTR_TYPE(EVP_PKEY)
+MAKE_OPENSSL_PTR_TYPE(RSA)
+MAKE_OPENSSL_PTR_TYPE(X509)
+MAKE_OPENSSL_PTR_TYPE(BN_CTX)
+
+typedef std::unique_ptr<BIGNUM, UniquePtrDeleter<BIGNUM, BN_free>> BIGNUM_Ptr;
+
+inline const EVP_MD* openssl_digest(android::hardware::keymint::Digest digest) {
+    switch (digest) {
+        case android::hardware::keymint::Digest::NONE:
+            return nullptr;
+        case android::hardware::keymint::Digest::MD5:
+            return EVP_md5();
+        case android::hardware::keymint::Digest::SHA1:
+            return EVP_sha1();
+        case android::hardware::keymint::Digest::SHA_2_224:
+            return EVP_sha224();
+        case android::hardware::keymint::Digest::SHA_2_256:
+            return EVP_sha256();
+        case android::hardware::keymint::Digest::SHA_2_384:
+            return EVP_sha384();
+        case android::hardware::keymint::Digest::SHA_2_512:
+            return EVP_sha512();
+    }
+    return nullptr;
+}
+
+#endif  // HARDWARE_INTERFACES_KEYMINT_1_0_SUPPORT_OPENSSL_UTILS_H_
diff --git a/keymint/support/key_param_output.cpp b/keymint/support/key_param_output.cpp
new file mode 100644
index 0000000..6e33558
--- /dev/null
+++ b/keymint/support/key_param_output.cpp
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2017 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <keymintSupport/key_param_output.h>
+
+#include <keymintSupport/keymint_tags.h>
+
+#include <iomanip>
+
+namespace android {
+namespace hardware {
+namespace keymint {
+
+using ::std::endl;
+using ::std::ostream;
+
+ostream& operator<<(ostream& os, const ::std::vector<KeyParameter>& set) {
+    if (set.size() == 0) {
+        os << "(Empty)" << endl;
+    } else {
+        os << "\n";
+        for (const auto& elem : set) os << elem << endl;
+    }
+    return os;
+}
+
+// TODO(seleneh) update this to a parsing that looks at each tags individually
+// such as ALGORITHM BLOCK_MODE when aidl union support is added.
+ostream& operator<<(ostream& os, const KeyParameter& param) {
+    os << param.tag << ": ";
+    switch (typeFromTag(param.tag)) {
+        case TagType::INVALID:
+            return os << " Invalid";
+        case TagType::ENUM_REP:
+        case TagType::ENUM:
+        case TagType::UINT_REP:
+        case TagType::UINT:
+            return os << param.integer;
+        case TagType::ULONG_REP:
+        case TagType::ULONG:
+        case TagType::DATE:
+            return os << param.longInteger;
+        case TagType::BOOL:
+            return os << "true";
+        case TagType::BIGNUM:
+            os << " Bignum: ";
+            for (size_t i = 0; i < param.blob.size(); ++i) {
+                os << std::hex << ::std::setw(2) << static_cast<int>(param.blob[i]) << ::std::dec;
+            }
+            return os;
+        case TagType::BYTES:
+            os << " Bytes: ";
+            for (size_t i = 0; i < param.blob.size(); ++i) {
+                os << ::std::hex << ::std::setw(2) << static_cast<int>(param.blob[i]) << ::std::dec;
+            }
+            return os;
+    }
+    return os << "UNKNOWN TAG TYPE!";
+}
+
+}  // namespace keymint
+}  // namespace hardware
+}  // namespace android
diff --git a/keymint/support/keymint_utils.cpp b/keymint/support/keymint_utils.cpp
new file mode 100644
index 0000000..fd57cf5
--- /dev/null
+++ b/keymint/support/keymint_utils.cpp
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <regex.h>
+
+#include <android-base/properties.h>
+#include <hardware/hw_auth_token.h>
+#include <keymintSupport/keymint_utils.h>
+
+#include <arpa/inet.h>
+
+namespace android::hardware::keymint {
+
+namespace {
+
+constexpr char kPlatformVersionProp[] = "ro.build.version.release";
+constexpr char kPlatformVersionRegex[] = "^([0-9]{1,2})(\\.([0-9]{1,2}))?(\\.([0-9]{1,2}))?";
+constexpr size_t kMajorVersionMatch = 1;
+constexpr size_t kMinorVersionMatch = 3;
+constexpr size_t kSubminorVersionMatch = 5;
+constexpr size_t kPlatformVersionMatchCount = kSubminorVersionMatch + 1;
+
+constexpr char kPlatformPatchlevelProp[] = "ro.build.version.security_patch";
+constexpr char kPlatformPatchlevelRegex[] = "^([0-9]{4})-([0-9]{2})-[0-9]{2}$";
+constexpr size_t kYearMatch = 1;
+constexpr size_t kMonthMatch = 2;
+constexpr size_t kPlatformPatchlevelMatchCount = kMonthMatch + 1;
+
+uint32_t match_to_uint32(const char* expression, const regmatch_t& match) {
+    if (match.rm_so == -1) return 0;
+
+    size_t len = match.rm_eo - match.rm_so;
+    std::string s(expression + match.rm_so, len);
+    return std::stoul(s);
+}
+
+std::string wait_and_get_property(const char* prop) {
+    std::string prop_value;
+    while (!::android::base::WaitForPropertyCreation(prop))
+        ;
+    prop_value = ::android::base::GetProperty(prop, "" /* default */);
+    return prop_value;
+}
+
+}  // anonymous namespace
+
+uint32_t getOsVersion(const char* version_str) {
+    regex_t regex;
+    if (regcomp(&regex, kPlatformVersionRegex, REG_EXTENDED)) {
+        return 0;
+    }
+
+    regmatch_t matches[kPlatformVersionMatchCount];
+    int not_match =
+            regexec(&regex, version_str, kPlatformVersionMatchCount, matches, 0 /* flags */);
+    regfree(&regex);
+    if (not_match) {
+        return 0;
+    }
+
+    uint32_t major = match_to_uint32(version_str, matches[kMajorVersionMatch]);
+    uint32_t minor = match_to_uint32(version_str, matches[kMinorVersionMatch]);
+    uint32_t subminor = match_to_uint32(version_str, matches[kSubminorVersionMatch]);
+
+    return (major * 100 + minor) * 100 + subminor;
+}
+
+uint32_t getOsVersion() {
+    std::string version = wait_and_get_property(kPlatformVersionProp);
+    return getOsVersion(version.c_str());
+}
+
+uint32_t getOsPatchlevel(const char* patchlevel_str) {
+    regex_t regex;
+    if (regcomp(&regex, kPlatformPatchlevelRegex, REG_EXTENDED) != 0) {
+        return 0;
+    }
+
+    regmatch_t matches[kPlatformPatchlevelMatchCount];
+    int not_match =
+            regexec(&regex, patchlevel_str, kPlatformPatchlevelMatchCount, matches, 0 /* flags */);
+    regfree(&regex);
+    if (not_match) {
+        return 0;
+    }
+
+    uint32_t year = match_to_uint32(patchlevel_str, matches[kYearMatch]);
+    uint32_t month = match_to_uint32(patchlevel_str, matches[kMonthMatch]);
+
+    if (month < 1 || month > 12) {
+        return 0;
+    }
+    return year * 100 + month;
+}
+
+uint32_t getOsPatchlevel() {
+    std::string patchlevel = wait_and_get_property(kPlatformPatchlevelProp);
+    return getOsPatchlevel(patchlevel.c_str());
+}
+
+}  // namespace android::hardware::keymint
diff --git a/neuralnetworks/1.0/utils/Android.bp b/neuralnetworks/1.0/utils/Android.bp
index 57a052f..4d61fc0 100644
--- a/neuralnetworks/1.0/utils/Android.bp
+++ b/neuralnetworks/1.0/utils/Android.bp
@@ -20,6 +20,7 @@
     srcs: ["src/*"],
     local_include_dirs: ["include/nnapi/hal/1.0/"],
     export_include_dirs: ["include"],
+    cflags: ["-Wthread-safety"],
     static_libs: [
         "neuralnetworks_types",
         "neuralnetworks_utils_hal_common",
diff --git a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Callbacks.h b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Callbacks.h
new file mode 100644
index 0000000..65b75e5
--- /dev/null
+++ b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Callbacks.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_CALLBACKS_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_CALLBACKS_H
+
+#include <android/hardware/neuralnetworks/1.0/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.0/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+#include <nnapi/hal/TransferValue.h>
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+
+class PreparedModelCallback final : public IPreparedModelCallback,
+                                    public hal::utils::IProtectedCallback {
+  public:
+    using Data = nn::GeneralResult<nn::SharedPreparedModel>;
+
+    Return<void> notify(ErrorStatus status, const sp<IPreparedModel>& preparedModel) override;
+
+    void notifyAsDeadObject() override;
+
+    Data get();
+
+  private:
+    void notifyInternal(Data result);
+
+    hal::utils::TransferValue<Data> mData;
+};
+
+class ExecutionCallback final : public IExecutionCallback, public hal::utils::IProtectedCallback {
+  public:
+    using Data = nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>;
+
+    Return<void> notify(ErrorStatus status) override;
+
+    void notifyAsDeadObject() override;
+
+    Data get();
+
+  private:
+    void notifyInternal(Data result);
+
+    hal::utils::TransferValue<Data> mData;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_CALLBACKS_H
diff --git a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Conversions.h b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Conversions.h
index 8ad98cb..fb77cb2 100644
--- a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Conversions.h
+++ b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Conversions.h
@@ -24,42 +24,44 @@
 
 namespace android::nn {
 
-Result<OperandType> convert(const hal::V1_0::OperandType& operandType);
-Result<OperationType> convert(const hal::V1_0::OperationType& operationType);
-Result<Operand::LifeTime> convert(const hal::V1_0::OperandLifeTime& lifetime);
-Result<DeviceStatus> convert(const hal::V1_0::DeviceStatus& deviceStatus);
-Result<Capabilities::PerformanceInfo> convert(const hal::V1_0::PerformanceInfo& performanceInfo);
-Result<Capabilities> convert(const hal::V1_0::Capabilities& capabilities);
-Result<DataLocation> convert(const hal::V1_0::DataLocation& location);
-Result<Operand> convert(const hal::V1_0::Operand& operand);
-Result<Operation> convert(const hal::V1_0::Operation& operation);
-Result<Model::OperandValues> convert(const hardware::hidl_vec<uint8_t>& operandValues);
-Result<Memory> convert(const hardware::hidl_memory& memory);
-Result<Model> convert(const hal::V1_0::Model& model);
-Result<Request::Argument> convert(const hal::V1_0::RequestArgument& requestArgument);
-Result<Request> convert(const hal::V1_0::Request& request);
-Result<ErrorStatus> convert(const hal::V1_0::ErrorStatus& status);
+GeneralResult<OperandType> convert(const hal::V1_0::OperandType& operandType);
+GeneralResult<OperationType> convert(const hal::V1_0::OperationType& operationType);
+GeneralResult<Operand::LifeTime> convert(const hal::V1_0::OperandLifeTime& lifetime);
+GeneralResult<DeviceStatus> convert(const hal::V1_0::DeviceStatus& deviceStatus);
+GeneralResult<Capabilities::PerformanceInfo> convert(
+        const hal::V1_0::PerformanceInfo& performanceInfo);
+GeneralResult<Capabilities> convert(const hal::V1_0::Capabilities& capabilities);
+GeneralResult<DataLocation> convert(const hal::V1_0::DataLocation& location);
+GeneralResult<Operand> convert(const hal::V1_0::Operand& operand);
+GeneralResult<Operation> convert(const hal::V1_0::Operation& operation);
+GeneralResult<Model::OperandValues> convert(const hardware::hidl_vec<uint8_t>& operandValues);
+GeneralResult<Memory> convert(const hardware::hidl_memory& memory);
+GeneralResult<Model> convert(const hal::V1_0::Model& model);
+GeneralResult<Request::Argument> convert(const hal::V1_0::RequestArgument& requestArgument);
+GeneralResult<Request> convert(const hal::V1_0::Request& request);
+GeneralResult<ErrorStatus> convert(const hal::V1_0::ErrorStatus& status);
 
 }  // namespace android::nn
 
 namespace android::hardware::neuralnetworks::V1_0::utils {
 
-nn::Result<OperandType> convert(const nn::OperandType& operandType);
-nn::Result<OperationType> convert(const nn::OperationType& operationType);
-nn::Result<OperandLifeTime> convert(const nn::Operand::LifeTime& lifetime);
-nn::Result<DeviceStatus> convert(const nn::DeviceStatus& deviceStatus);
-nn::Result<PerformanceInfo> convert(const nn::Capabilities::PerformanceInfo& performanceInfo);
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities);
-nn::Result<DataLocation> convert(const nn::DataLocation& location);
-nn::Result<Operand> convert(const nn::Operand& operand);
-nn::Result<Operation> convert(const nn::Operation& operation);
-nn::Result<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues);
-nn::Result<hidl_memory> convert(const nn::Memory& memory);
-nn::Result<Model> convert(const nn::Model& model);
-nn::Result<RequestArgument> convert(const nn::Request::Argument& requestArgument);
-nn::Result<hidl_memory> convert(const nn::Request::MemoryPool& memoryPool);
-nn::Result<Request> convert(const nn::Request& request);
-nn::Result<ErrorStatus> convert(const nn::ErrorStatus& status);
+nn::GeneralResult<OperandType> convert(const nn::OperandType& operandType);
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType);
+nn::GeneralResult<OperandLifeTime> convert(const nn::Operand::LifeTime& lifetime);
+nn::GeneralResult<DeviceStatus> convert(const nn::DeviceStatus& deviceStatus);
+nn::GeneralResult<PerformanceInfo> convert(
+        const nn::Capabilities::PerformanceInfo& performanceInfo);
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities);
+nn::GeneralResult<DataLocation> convert(const nn::DataLocation& location);
+nn::GeneralResult<Operand> convert(const nn::Operand& operand);
+nn::GeneralResult<Operation> convert(const nn::Operation& operation);
+nn::GeneralResult<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues);
+nn::GeneralResult<hidl_memory> convert(const nn::Memory& memory);
+nn::GeneralResult<Model> convert(const nn::Model& model);
+nn::GeneralResult<RequestArgument> convert(const nn::Request::Argument& requestArgument);
+nn::GeneralResult<hidl_memory> convert(const nn::Request::MemoryPool& memoryPool);
+nn::GeneralResult<Request> convert(const nn::Request& request);
+nn::GeneralResult<ErrorStatus> convert(const nn::ErrorStatus& status);
 
 }  // namespace android::hardware::neuralnetworks::V1_0::utils
 
diff --git a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Device.h b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Device.h
new file mode 100644
index 0000000..ee103ba
--- /dev/null
+++ b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Device.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_DEVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_DEVICE_H
+
+#include <android/hardware/neuralnetworks/1.0/IDevice.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+
+class Device final : public nn::IDevice {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const Device>> create(std::string name,
+                                                                   sp<V1_0::IDevice> device);
+
+    Device(PrivateConstructorTag tag, std::string name, nn::Capabilities capabilities,
+           sp<V1_0::IDevice> device, hal::utils::DeathHandler deathHandler);
+
+    const std::string& getName() const override;
+    const std::string& getVersionString() const override;
+    nn::Version getFeatureLevel() const override;
+    nn::DeviceType getType() const override;
+    const std::vector<nn::Extension>& getSupportedExtensions() const override;
+    const nn::Capabilities& getCapabilities() const override;
+    std::pair<uint32_t, uint32_t> getNumberOfCacheFilesNeeded() const override;
+
+    nn::GeneralResult<void> wait() const override;
+
+    nn::GeneralResult<std::vector<bool>> getSupportedOperations(
+            const nn::Model& model) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModel(
+            const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelFromCache(
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedBuffer> allocate(
+            const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+            const std::vector<nn::BufferRole>& inputRoles,
+            const std::vector<nn::BufferRole>& outputRoles) const override;
+
+  private:
+    const std::string kName;
+    const std::string kVersionString = "UNKNOWN";
+    const std::vector<nn::Extension> kExtensions;
+    const nn::Capabilities kCapabilities;
+    const sp<V1_0::IDevice> kDevice;
+    const hal::utils::DeathHandler kDeathHandler;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_DEVICE_H
diff --git a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/PreparedModel.h b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/PreparedModel.h
new file mode 100644
index 0000000..31f366d
--- /dev/null
+++ b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/PreparedModel.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_PREPARED_MODEL_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_PREPARED_MODEL_H
+
+#include <android/hardware/neuralnetworks/1.0/IPreparedModel.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <memory>
+#include <tuple>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+
+class PreparedModel final : public nn::IPreparedModel {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const PreparedModel>> create(
+            sp<V1_0::IPreparedModel> preparedModel);
+
+    PreparedModel(PrivateConstructorTag tag, sp<V1_0::IPreparedModel> preparedModel,
+                  hal::utils::DeathHandler deathHandler);
+
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> execute(
+            const nn::Request& request, nn::MeasureTiming measure,
+            const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration) const override;
+
+    nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>> executeFenced(
+            const nn::Request& request, const std::vector<nn::SyncFence>& waitFor,
+            nn::MeasureTiming measure, const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration,
+            const nn::OptionalTimeoutDuration& timeoutDurationAfterFence) const override;
+
+    std::any getUnderlyingResource() const override;
+
+  private:
+    const sp<V1_0::IPreparedModel> kPreparedModel;
+    const hal::utils::DeathHandler kDeathHandler;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_PREPARED_MODEL_H
diff --git a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Service.h b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Service.h
new file mode 100644
index 0000000..11fbb9e
--- /dev/null
+++ b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Service.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_SERVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_SERVICE_H
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <string>
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name);
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_0_UTILS_SERVICE_H
diff --git a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Utils.h b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Utils.h
index ec8da06..baa2b95 100644
--- a/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Utils.h
+++ b/neuralnetworks/1.0/utils/include/nnapi/hal/1.0/Utils.h
@@ -22,6 +22,7 @@
 #include <android-base/logging.h>
 #include <android/hardware/neuralnetworks/1.0/types.h>
 #include <nnapi/Result.h>
+#include <nnapi/TypeUtils.h>
 #include <nnapi/Types.h>
 #include <nnapi/Validation.h>
 
@@ -31,10 +32,14 @@
 
 template <typename Type>
 nn::Result<void> validate(const Type& halObject) {
-    const auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeCanonical = nn::convert(halObject);
+    if (!maybeCanonical.has_value()) {
+        return nn::error() << maybeCanonical.error().message;
+    }
+    const auto version = NN_TRY(nn::validate(maybeCanonical.value()));
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return {};
 }
@@ -51,9 +56,14 @@
 template <typename Type>
 decltype(nn::convert(std::declval<Type>())) validatedConvertToCanonical(const Type& halObject) {
     auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeVersion = nn::validate(canonical);
+    if (!maybeVersion.has_value()) {
+        return nn::error() << maybeVersion.error();
+    }
+    const auto version = maybeVersion.value();
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return canonical;
 }
diff --git a/neuralnetworks/1.0/utils/src/Callbacks.cpp b/neuralnetworks/1.0/utils/src/Callbacks.cpp
new file mode 100644
index 0000000..f286bcc
--- /dev/null
+++ b/neuralnetworks/1.0/utils/src/Callbacks.cpp
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Callbacks.h"
+
+#include "Conversions.h"
+#include "PreparedModel.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.0/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+#include <nnapi/hal/TransferValue.h>
+
+#include <utility>
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+namespace {
+
+nn::GeneralResult<nn::SharedPreparedModel> convertPreparedModel(
+        const sp<IPreparedModel>& preparedModel) {
+    return NN_TRY(utils::PreparedModel::create(preparedModel));
+}
+
+}  // namespace
+
+Return<void> PreparedModelCallback::notify(ErrorStatus status,
+                                           const sp<IPreparedModel>& preparedModel) {
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "preparedModel failed with " << toString(status));
+    } else if (preparedModel == nullptr) {
+        notifyInternal(NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                       << "Returned preparedModel is nullptr");
+    } else {
+        notifyInternal(convertPreparedModel(preparedModel));
+    }
+    return Void();
+}
+
+void PreparedModelCallback::notifyAsDeadObject() {
+    notifyInternal(NN_ERROR(nn::ErrorStatus::DEAD_OBJECT) << "Dead object");
+}
+
+PreparedModelCallback::Data PreparedModelCallback::get() {
+    return mData.take();
+}
+
+void PreparedModelCallback::notifyInternal(PreparedModelCallback::Data result) {
+    mData.put(std::move(result));
+}
+
+// ExecutionCallback methods begin here
+
+Return<void> ExecutionCallback::notify(ErrorStatus status) {
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "execute failed with " << toString(status));
+    } else {
+        notifyInternal({});
+    }
+    return Void();
+}
+
+void ExecutionCallback::notifyAsDeadObject() {
+    notifyInternal(NN_ERROR(nn::ErrorStatus::DEAD_OBJECT) << "Dead object");
+}
+
+ExecutionCallback::Data ExecutionCallback::get() {
+    return mData.take();
+}
+
+void ExecutionCallback::notifyInternal(ExecutionCallback::Data result) {
+    mData.put(std::move(result));
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
diff --git a/neuralnetworks/1.0/utils/src/Conversions.cpp b/neuralnetworks/1.0/utils/src/Conversions.cpp
index 4a58f3b..6cf9073 100644
--- a/neuralnetworks/1.0/utils/src/Conversions.cpp
+++ b/neuralnetworks/1.0/utils/src/Conversions.cpp
@@ -52,7 +52,7 @@
 using ConvertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-Result<std::vector<ConvertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
+GeneralResult<std::vector<ConvertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
     std::vector<ConvertOutput<Type>> canonical;
     canonical.reserve(arguments.size());
     for (const auto& argument : arguments) {
@@ -63,30 +63,31 @@
 
 }  // anonymous namespace
 
-Result<OperandType> convert(const hal::V1_0::OperandType& operandType) {
+GeneralResult<OperandType> convert(const hal::V1_0::OperandType& operandType) {
     return static_cast<OperandType>(operandType);
 }
 
-Result<OperationType> convert(const hal::V1_0::OperationType& operationType) {
+GeneralResult<OperationType> convert(const hal::V1_0::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-Result<Operand::LifeTime> convert(const hal::V1_0::OperandLifeTime& lifetime) {
+GeneralResult<Operand::LifeTime> convert(const hal::V1_0::OperandLifeTime& lifetime) {
     return static_cast<Operand::LifeTime>(lifetime);
 }
 
-Result<DeviceStatus> convert(const hal::V1_0::DeviceStatus& deviceStatus) {
+GeneralResult<DeviceStatus> convert(const hal::V1_0::DeviceStatus& deviceStatus) {
     return static_cast<DeviceStatus>(deviceStatus);
 }
 
-Result<Capabilities::PerformanceInfo> convert(const hal::V1_0::PerformanceInfo& performanceInfo) {
+GeneralResult<Capabilities::PerformanceInfo> convert(
+        const hal::V1_0::PerformanceInfo& performanceInfo) {
     return Capabilities::PerformanceInfo{
             .execTime = performanceInfo.execTime,
             .powerUsage = performanceInfo.powerUsage,
     };
 }
 
-Result<Capabilities> convert(const hal::V1_0::Capabilities& capabilities) {
+GeneralResult<Capabilities> convert(const hal::V1_0::Capabilities& capabilities) {
     const auto quantized8Performance = NN_TRY(convert(capabilities.quantized8Performance));
     const auto float32Performance = NN_TRY(convert(capabilities.float32Performance));
 
@@ -100,7 +101,7 @@
     };
 }
 
-Result<DataLocation> convert(const hal::V1_0::DataLocation& location) {
+GeneralResult<DataLocation> convert(const hal::V1_0::DataLocation& location) {
     return DataLocation{
             .poolIndex = location.poolIndex,
             .offset = location.offset,
@@ -108,7 +109,7 @@
     };
 }
 
-Result<Operand> convert(const hal::V1_0::Operand& operand) {
+GeneralResult<Operand> convert(const hal::V1_0::Operand& operand) {
     return Operand{
             .type = NN_TRY(convert(operand.type)),
             .dimensions = operand.dimensions,
@@ -119,7 +120,7 @@
     };
 }
 
-Result<Operation> convert(const hal::V1_0::Operation& operation) {
+GeneralResult<Operation> convert(const hal::V1_0::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -127,15 +128,15 @@
     };
 }
 
-Result<Model::OperandValues> convert(const hidl_vec<uint8_t>& operandValues) {
+GeneralResult<Model::OperandValues> convert(const hidl_vec<uint8_t>& operandValues) {
     return Model::OperandValues(operandValues.data(), operandValues.size());
 }
 
-Result<Memory> convert(const hidl_memory& memory) {
+GeneralResult<Memory> convert(const hidl_memory& memory) {
     return createSharedMemoryFromHidlMemory(memory);
 }
 
-Result<Model> convert(const hal::V1_0::Model& model) {
+GeneralResult<Model> convert(const hal::V1_0::Model& model) {
     auto operations = NN_TRY(convert(model.operations));
 
     // Verify number of consumers.
@@ -144,9 +145,9 @@
     CHECK(model.operands.size() == numberOfConsumers.size());
     for (size_t i = 0; i < model.operands.size(); ++i) {
         if (model.operands[i].numberOfConsumers != numberOfConsumers[i]) {
-            return NN_ERROR() << "Invalid numberOfConsumers for operand " << i << ", expected "
-                              << numberOfConsumers[i] << " but found "
-                              << model.operands[i].numberOfConsumers;
+            return NN_ERROR(ErrorStatus::GENERAL_FAILURE)
+                   << "Invalid numberOfConsumers for operand " << i << ", expected "
+                   << numberOfConsumers[i] << " but found " << model.operands[i].numberOfConsumers;
         }
     }
 
@@ -164,7 +165,7 @@
     };
 }
 
-Result<Request::Argument> convert(const hal::V1_0::RequestArgument& argument) {
+GeneralResult<Request::Argument> convert(const hal::V1_0::RequestArgument& argument) {
     const auto lifetime = argument.hasNoValue ? Request::Argument::LifeTime::NO_VALUE
                                               : Request::Argument::LifeTime::POOL;
     return Request::Argument{
@@ -174,7 +175,7 @@
     };
 }
 
-Result<Request> convert(const hal::V1_0::Request& request) {
+GeneralResult<Request> convert(const hal::V1_0::Request& request) {
     auto memories = NN_TRY(convert(request.pools));
     std::vector<Request::MemoryPool> pools;
     pools.reserve(memories.size());
@@ -187,7 +188,7 @@
     };
 }
 
-Result<ErrorStatus> convert(const hal::V1_0::ErrorStatus& status) {
+GeneralResult<ErrorStatus> convert(const hal::V1_0::ErrorStatus& status) {
     switch (status) {
         case hal::V1_0::ErrorStatus::NONE:
         case hal::V1_0::ErrorStatus::DEVICE_UNAVAILABLE:
@@ -196,7 +197,8 @@
         case hal::V1_0::ErrorStatus::INVALID_ARGUMENT:
             return static_cast<ErrorStatus>(status);
     }
-    return NN_ERROR() << "Invalid ErrorStatus " << underlyingType(status);
+    return NN_ERROR(ErrorStatus::GENERAL_FAILURE)
+           << "Invalid ErrorStatus " << underlyingType(status);
 }
 
 }  // namespace android::nn
@@ -208,7 +210,7 @@
 using ConvertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-nn::Result<hidl_vec<ConvertOutput<Type>>> convert(const std::vector<Type>& arguments) {
+nn::GeneralResult<hidl_vec<ConvertOutput<Type>>> convert(const std::vector<Type>& arguments) {
     hidl_vec<ConvertOutput<Type>> halObject(arguments.size());
     for (size_t i = 0; i < arguments.size(); ++i) {
         halObject[i] = NN_TRY(utils::convert(arguments[i]));
@@ -218,33 +220,35 @@
 
 }  // anonymous namespace
 
-nn::Result<OperandType> convert(const nn::OperandType& operandType) {
+nn::GeneralResult<OperandType> convert(const nn::OperandType& operandType) {
     return static_cast<OperandType>(operandType);
 }
 
-nn::Result<OperationType> convert(const nn::OperationType& operationType) {
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-nn::Result<OperandLifeTime> convert(const nn::Operand::LifeTime& lifetime) {
+nn::GeneralResult<OperandLifeTime> convert(const nn::Operand::LifeTime& lifetime) {
     if (lifetime == nn::Operand::LifeTime::POINTER) {
-        return NN_ERROR() << "Model cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Model cannot be converted because it contains pointer-based memory";
     }
     return static_cast<OperandLifeTime>(lifetime);
 }
 
-nn::Result<DeviceStatus> convert(const nn::DeviceStatus& deviceStatus) {
+nn::GeneralResult<DeviceStatus> convert(const nn::DeviceStatus& deviceStatus) {
     return static_cast<DeviceStatus>(deviceStatus);
 }
 
-nn::Result<PerformanceInfo> convert(const nn::Capabilities::PerformanceInfo& performanceInfo) {
+nn::GeneralResult<PerformanceInfo> convert(
+        const nn::Capabilities::PerformanceInfo& performanceInfo) {
     return PerformanceInfo{
             .execTime = performanceInfo.execTime,
             .powerUsage = performanceInfo.powerUsage,
     };
 }
 
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities) {
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities) {
     return Capabilities{
             .float32Performance = NN_TRY(convert(
                     capabilities.operandPerformance.lookup(nn::OperandType::TENSOR_FLOAT32))),
@@ -253,7 +257,7 @@
     };
 }
 
-nn::Result<DataLocation> convert(const nn::DataLocation& location) {
+nn::GeneralResult<DataLocation> convert(const nn::DataLocation& location) {
     return DataLocation{
             .poolIndex = location.poolIndex,
             .offset = location.offset,
@@ -261,7 +265,7 @@
     };
 }
 
-nn::Result<Operand> convert(const nn::Operand& operand) {
+nn::GeneralResult<Operand> convert(const nn::Operand& operand) {
     return Operand{
             .type = NN_TRY(convert(operand.type)),
             .dimensions = operand.dimensions,
@@ -273,7 +277,7 @@
     };
 }
 
-nn::Result<Operation> convert(const nn::Operation& operation) {
+nn::GeneralResult<Operation> convert(const nn::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -281,20 +285,19 @@
     };
 }
 
-nn::Result<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
+nn::GeneralResult<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
     return hidl_vec<uint8_t>(operandValues.data(), operandValues.data() + operandValues.size());
 }
 
-nn::Result<hidl_memory> convert(const nn::Memory& memory) {
-    const auto hidlMemory = hidl_memory(memory.name, memory.handle->handle(), memory.size);
-    // Copy memory to force the native_handle_t to be copied.
-    auto copiedMemory = hidlMemory;
-    return copiedMemory;
+nn::GeneralResult<hidl_memory> convert(const nn::Memory& memory) {
+    return hidl_memory(memory.name, NN_TRY(hal::utils::hidlHandleFromSharedHandle(memory.handle)),
+                       memory.size);
 }
 
-nn::Result<Model> convert(const nn::Model& model) {
+nn::GeneralResult<Model> convert(const nn::Model& model) {
     if (!hal::utils::hasNoPointerData(model)) {
-        return NN_ERROR() << "Mdoel cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Mdoel cannot be converted because it contains pointer-based memory";
     }
 
     auto operands = NN_TRY(convert(model.main.operands));
@@ -317,9 +320,10 @@
     };
 }
 
-nn::Result<RequestArgument> convert(const nn::Request::Argument& requestArgument) {
+nn::GeneralResult<RequestArgument> convert(const nn::Request::Argument& requestArgument) {
     if (requestArgument.lifetime == nn::Request::Argument::LifeTime::POINTER) {
-        return NN_ERROR() << "Request cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Request cannot be converted because it contains pointer-based memory";
     }
     const bool hasNoValue = requestArgument.lifetime == nn::Request::Argument::LifeTime::NO_VALUE;
     return RequestArgument{
@@ -329,13 +333,14 @@
     };
 }
 
-nn::Result<hidl_memory> convert(const nn::Request::MemoryPool& memoryPool) {
+nn::GeneralResult<hidl_memory> convert(const nn::Request::MemoryPool& memoryPool) {
     return convert(std::get<nn::Memory>(memoryPool));
 }
 
-nn::Result<Request> convert(const nn::Request& request) {
+nn::GeneralResult<Request> convert(const nn::Request& request) {
     if (!hal::utils::hasNoPointerData(request)) {
-        return NN_ERROR() << "Request cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Request cannot be converted because it contains pointer-based memory";
     }
 
     return Request{
@@ -345,7 +350,7 @@
     };
 }
 
-nn::Result<ErrorStatus> convert(const nn::ErrorStatus& status) {
+nn::GeneralResult<ErrorStatus> convert(const nn::ErrorStatus& status) {
     switch (status) {
         case nn::ErrorStatus::NONE:
         case nn::ErrorStatus::DEVICE_UNAVAILABLE:
diff --git a/neuralnetworks/1.0/utils/src/Device.cpp b/neuralnetworks/1.0/utils/src/Device.cpp
new file mode 100644
index 0000000..671416b
--- /dev/null
+++ b/neuralnetworks/1.0/utils/src/Device.cpp
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Device.h"
+
+#include "Callbacks.h"
+#include "Conversions.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/IDevice.h>
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+namespace {
+
+nn::GeneralResult<nn::Capabilities> initCapabilities(V1_0::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<nn::Capabilities> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                 << "uninitialized";
+    const auto cb = [&result](ErrorStatus status, const Capabilities& capabilities) {
+        if (status != ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "getCapabilities failed with " << toString(status);
+        } else {
+            result = validatedConvertToCanonical(capabilities);
+        }
+    };
+
+    const auto ret = device->getCapabilities(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+}  // namespace
+
+nn::GeneralResult<std::shared_ptr<const Device>> Device::create(std::string name,
+                                                                sp<V1_0::IDevice> device) {
+    if (name.empty()) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_0::utils::Device::create must have non-empty name";
+    }
+    if (device == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_0::utils::Device::create must have non-null device";
+    }
+
+    auto capabilities = NN_TRY(initCapabilities(device.get()));
+
+    auto deathHandler = NN_TRY(hal::utils::DeathHandler::create(device));
+    return std::make_shared<const Device>(PrivateConstructorTag{}, std::move(name),
+                                          std::move(capabilities), std::move(device),
+                                          std::move(deathHandler));
+}
+
+Device::Device(PrivateConstructorTag /*tag*/, std::string name, nn::Capabilities capabilities,
+               sp<V1_0::IDevice> device, hal::utils::DeathHandler deathHandler)
+    : kName(std::move(name)),
+      kCapabilities(std::move(capabilities)),
+      kDevice(std::move(device)),
+      kDeathHandler(std::move(deathHandler)) {}
+
+const std::string& Device::getName() const {
+    return kName;
+}
+
+const std::string& Device::getVersionString() const {
+    return kVersionString;
+}
+
+nn::Version Device::getFeatureLevel() const {
+    return nn::Version::ANDROID_OC_MR1;
+}
+
+nn::DeviceType Device::getType() const {
+    return nn::DeviceType::OTHER;
+}
+
+const std::vector<nn::Extension>& Device::getSupportedExtensions() const {
+    return kExtensions;
+}
+
+const nn::Capabilities& Device::getCapabilities() const {
+    return kCapabilities;
+}
+
+std::pair<uint32_t, uint32_t> Device::getNumberOfCacheFilesNeeded() const {
+    return std::make_pair(/*numModelCache=*/0, /*numDataCache=*/0);
+}
+
+nn::GeneralResult<void> Device::wait() const {
+    const auto ret = kDevice->ping();
+    return hal::utils::handleTransportError(ret);
+}
+
+nn::GeneralResult<std::vector<bool>> Device::getSupportedOperations(const nn::Model& model) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+
+    nn::GeneralResult<std::vector<bool>> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                  << "uninitialized";
+    auto cb = [&result, &model](ErrorStatus status, const hidl_vec<bool>& supportedOperations) {
+        if (status != ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical)
+                     << "getSupportedOperations failed with " << toString(status);
+        } else if (supportedOperations.size() != model.main.operations.size()) {
+            result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                     << "getSupportedOperations returned vector of size "
+                     << supportedOperations.size() << " but expected "
+                     << model.main.operations.size();
+        } else {
+            result = supportedOperations;
+        }
+    };
+
+    const auto ret = kDevice->getSupportedOperations(hidlModel, cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModel(
+        const nn::Model& model, nn::ExecutionPreference /*preference*/, nn::Priority /*priority*/,
+        nn::OptionalTimePoint /*deadline*/, const std::vector<nn::SharedHandle>& /*modelCache*/,
+        const std::vector<nn::SharedHandle>& /*dataCache*/, const nn::CacheToken& /*token*/) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+
+    const auto cb = sp<PreparedModelCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret = kDevice->prepareModel(hidlModel, cb);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "prepareModel failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModelFromCache(
+        nn::OptionalTimePoint /*deadline*/, const std::vector<nn::SharedHandle>& /*modelCache*/,
+        const std::vector<nn::SharedHandle>& /*dataCache*/, const nn::CacheToken& /*token*/) const {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "IDevice::prepareModelFromCache not supported on 1.0 HAL service";
+}
+
+nn::GeneralResult<nn::SharedBuffer> Device::allocate(
+        const nn::BufferDesc& /*desc*/,
+        const std::vector<nn::SharedPreparedModel>& /*preparedModels*/,
+        const std::vector<nn::BufferRole>& /*inputRoles*/,
+        const std::vector<nn::BufferRole>& /*outputRoles*/) const {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "IDevice::allocate not supported on 1.0 HAL service";
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
diff --git a/neuralnetworks/1.0/utils/src/PreparedModel.cpp b/neuralnetworks/1.0/utils/src/PreparedModel.cpp
new file mode 100644
index 0000000..11ccbe3
--- /dev/null
+++ b/neuralnetworks/1.0/utils/src/PreparedModel.cpp
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PreparedModel.h"
+
+#include "Callbacks.h"
+#include "Conversions.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/IPreparedModel.h>
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <memory>
+#include <tuple>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+
+nn::GeneralResult<std::shared_ptr<const PreparedModel>> PreparedModel::create(
+        sp<V1_0::IPreparedModel> preparedModel) {
+    if (preparedModel == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_0::utils::PreparedModel::create must have non-null preparedModel";
+    }
+
+    auto deathHandler = NN_TRY(hal::utils::DeathHandler::create(preparedModel));
+    return std::make_shared<const PreparedModel>(PrivateConstructorTag{}, std::move(preparedModel),
+                                                 std::move(deathHandler));
+}
+
+PreparedModel::PreparedModel(PrivateConstructorTag /*tag*/, sp<V1_0::IPreparedModel> preparedModel,
+                             hal::utils::DeathHandler deathHandler)
+    : kPreparedModel(std::move(preparedModel)), kDeathHandler(std::move(deathHandler)) {}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> PreparedModel::execute(
+        const nn::Request& request, nn::MeasureTiming /*measure*/,
+        const nn::OptionalTimePoint& /*deadline*/,
+        const nn::OptionalTimeoutDuration& /*loopTimeoutDuration*/) const {
+    // Ensure that request is ready for IPC.
+    std::optional<nn::Request> maybeRequestInShared;
+    const nn::Request& requestInShared = NN_TRY(hal::utils::makeExecutionFailure(
+            hal::utils::flushDataFromPointerToShared(&request, &maybeRequestInShared)));
+
+    const auto hidlRequest = NN_TRY(hal::utils::makeExecutionFailure(convert(requestInShared)));
+
+    const auto cb = sp<ExecutionCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret = kPreparedModel->execute(hidlRequest, cb);
+    const auto status =
+            NN_TRY(hal::utils::makeExecutionFailure(hal::utils::handleTransportError(ret)));
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "execute failed with " << toString(status);
+    }
+
+    auto result = NN_TRY(cb->get());
+    NN_TRY(hal::utils::makeExecutionFailure(
+            hal::utils::unflushDataFromSharedToPointer(request, maybeRequestInShared)));
+
+    return result;
+}
+
+nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>>
+PreparedModel::executeFenced(
+        const nn::Request& /*request*/, const std::vector<nn::SyncFence>& /*waitFor*/,
+        nn::MeasureTiming /*measure*/, const nn::OptionalTimePoint& /*deadline*/,
+        const nn::OptionalTimeoutDuration& /*loopTimeoutDuration*/,
+        const nn::OptionalTimeoutDuration& /*timeoutDurationAfterFence*/) const {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "IPreparedModel::executeFenced is not supported on 1.0 HAL service";
+}
+
+std::any PreparedModel::getUnderlyingResource() const {
+    sp<V1_0::IPreparedModel> resource = kPreparedModel;
+    return resource;
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
diff --git a/neuralnetworks/1.0/utils/src/Service.cpp b/neuralnetworks/1.0/utils/src/Service.cpp
new file mode 100644
index 0000000..ec28b1d
--- /dev/null
+++ b/neuralnetworks/1.0/utils/src/Service.cpp
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Service.h"
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/ResilientDevice.h>
+#include <string>
+#include "Device.h"
+
+namespace android::hardware::neuralnetworks::V1_0::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name) {
+    hal::utils::ResilientDevice::Factory makeDevice =
+            [name](bool blocking) -> nn::GeneralResult<nn::SharedDevice> {
+        auto service = blocking ? IDevice::getService(name) : IDevice::tryGetService(name);
+        if (service == nullptr) {
+            return NN_ERROR() << (blocking ? "getService" : "tryGetService") << " returned nullptr";
+        }
+        return Device::create(name, std::move(service));
+    };
+
+    return hal::utils::ResilientDevice::create(std::move(makeDevice));
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_0::utils
diff --git a/neuralnetworks/1.1/utils/Android.bp b/neuralnetworks/1.1/utils/Android.bp
index 85a32c5..909575b 100644
--- a/neuralnetworks/1.1/utils/Android.bp
+++ b/neuralnetworks/1.1/utils/Android.bp
@@ -20,6 +20,7 @@
     srcs: ["src/*"],
     local_include_dirs: ["include/nnapi/hal/1.1/"],
     export_include_dirs: ["include"],
+    cflags: ["-Wthread-safety"],
     static_libs: [
         "neuralnetworks_types",
         "neuralnetworks_utils_hal_common",
diff --git a/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Conversions.h b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Conversions.h
index d0c5397..16ddd53 100644
--- a/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Conversions.h
+++ b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Conversions.h
@@ -24,21 +24,22 @@
 
 namespace android::nn {
 
-Result<OperationType> convert(const hal::V1_1::OperationType& operationType);
-Result<Capabilities> convert(const hal::V1_1::Capabilities& capabilities);
-Result<Operation> convert(const hal::V1_1::Operation& operation);
-Result<Model> convert(const hal::V1_1::Model& model);
-Result<ExecutionPreference> convert(const hal::V1_1::ExecutionPreference& executionPreference);
+GeneralResult<OperationType> convert(const hal::V1_1::OperationType& operationType);
+GeneralResult<Capabilities> convert(const hal::V1_1::Capabilities& capabilities);
+GeneralResult<Operation> convert(const hal::V1_1::Operation& operation);
+GeneralResult<Model> convert(const hal::V1_1::Model& model);
+GeneralResult<ExecutionPreference> convert(
+        const hal::V1_1::ExecutionPreference& executionPreference);
 
 }  // namespace android::nn
 
 namespace android::hardware::neuralnetworks::V1_1::utils {
 
-nn::Result<OperationType> convert(const nn::OperationType& operationType);
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities);
-nn::Result<Operation> convert(const nn::Operation& operation);
-nn::Result<Model> convert(const nn::Model& model);
-nn::Result<ExecutionPreference> convert(const nn::ExecutionPreference& executionPreference);
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType);
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities);
+nn::GeneralResult<Operation> convert(const nn::Operation& operation);
+nn::GeneralResult<Model> convert(const nn::Model& model);
+nn::GeneralResult<ExecutionPreference> convert(const nn::ExecutionPreference& executionPreference);
 
 }  // namespace android::hardware::neuralnetworks::V1_1::utils
 
diff --git a/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Device.h b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Device.h
new file mode 100644
index 0000000..c1e95fe1a
--- /dev/null
+++ b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Device.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_1_UTILS_DEVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_1_UTILS_DEVICE_H
+
+#include <android/hardware/neuralnetworks/1.1/IDevice.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_1::utils {
+
+class Device final : public nn::IDevice {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const Device>> create(std::string name,
+                                                                   sp<V1_1::IDevice> device);
+
+    Device(PrivateConstructorTag tag, std::string name, nn::Capabilities capabilities,
+           sp<V1_1::IDevice> device, hal::utils::DeathHandler deathHandler);
+
+    const std::string& getName() const override;
+    const std::string& getVersionString() const override;
+    nn::Version getFeatureLevel() const override;
+    nn::DeviceType getType() const override;
+    const std::vector<nn::Extension>& getSupportedExtensions() const override;
+    const nn::Capabilities& getCapabilities() const override;
+    std::pair<uint32_t, uint32_t> getNumberOfCacheFilesNeeded() const override;
+
+    nn::GeneralResult<void> wait() const override;
+
+    nn::GeneralResult<std::vector<bool>> getSupportedOperations(
+            const nn::Model& model) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModel(
+            const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelFromCache(
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedBuffer> allocate(
+            const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+            const std::vector<nn::BufferRole>& inputRoles,
+            const std::vector<nn::BufferRole>& outputRoles) const override;
+
+  private:
+    const std::string kName;
+    const std::string kVersionString = "UNKNOWN";
+    const std::vector<nn::Extension> kExtensions;
+    const nn::Capabilities kCapabilities;
+    const sp<V1_1::IDevice> kDevice;
+    const hal::utils::DeathHandler kDeathHandler;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_1::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_1_UTILS_DEVICE_H
diff --git a/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Service.h b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Service.h
new file mode 100644
index 0000000..a3ad3cf
--- /dev/null
+++ b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Service.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_1_UTILS_SERVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_1_UTILS_SERVICE_H
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <string>
+
+namespace android::hardware::neuralnetworks::V1_1::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name);
+
+}  // namespace android::hardware::neuralnetworks::V1_1::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_1_UTILS_SERVICE_H
diff --git a/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Utils.h b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Utils.h
index 6f9aa60..0fee628 100644
--- a/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Utils.h
+++ b/neuralnetworks/1.1/utils/include/nnapi/hal/1.1/Utils.h
@@ -22,6 +22,7 @@
 #include <android-base/logging.h>
 #include <android/hardware/neuralnetworks/1.1/types.h>
 #include <nnapi/Result.h>
+#include <nnapi/TypeUtils.h>
 #include <nnapi/Types.h>
 #include <nnapi/Validation.h>
 #include <nnapi/hal/1.0/Conversions.h>
@@ -33,10 +34,14 @@
 
 template <typename Type>
 nn::Result<void> validate(const Type& halObject) {
-    const auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeCanonical = nn::convert(halObject);
+    if (!maybeCanonical.has_value()) {
+        return nn::error() << maybeCanonical.error().message;
+    }
+    const auto version = NN_TRY(nn::validate(maybeCanonical.value()));
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return {};
 }
@@ -53,9 +58,14 @@
 template <typename Type>
 decltype(nn::convert(std::declval<Type>())) validatedConvertToCanonical(const Type& halObject) {
     auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeVersion = nn::validate(canonical);
+    if (!maybeVersion.has_value()) {
+        return nn::error() << maybeVersion.error();
+    }
+    const auto version = maybeVersion.value();
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return canonical;
 }
diff --git a/neuralnetworks/1.1/utils/src/Conversions.cpp b/neuralnetworks/1.1/utils/src/Conversions.cpp
index 7fee16b..ffe0752 100644
--- a/neuralnetworks/1.1/utils/src/Conversions.cpp
+++ b/neuralnetworks/1.1/utils/src/Conversions.cpp
@@ -42,7 +42,7 @@
 using convertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-Result<std::vector<convertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
+GeneralResult<std::vector<convertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
     std::vector<convertOutput<Type>> canonical;
     canonical.reserve(arguments.size());
     for (const auto& argument : arguments) {
@@ -53,11 +53,11 @@
 
 }  // anonymous namespace
 
-Result<OperationType> convert(const hal::V1_1::OperationType& operationType) {
+GeneralResult<OperationType> convert(const hal::V1_1::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-Result<Capabilities> convert(const hal::V1_1::Capabilities& capabilities) {
+GeneralResult<Capabilities> convert(const hal::V1_1::Capabilities& capabilities) {
     const auto quantized8Performance = NN_TRY(convert(capabilities.quantized8Performance));
     const auto float32Performance = NN_TRY(convert(capabilities.float32Performance));
     const auto relaxedFloat32toFloat16Performance =
@@ -73,7 +73,7 @@
     };
 }
 
-Result<Operation> convert(const hal::V1_1::Operation& operation) {
+GeneralResult<Operation> convert(const hal::V1_1::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -81,7 +81,7 @@
     };
 }
 
-Result<Model> convert(const hal::V1_1::Model& model) {
+GeneralResult<Model> convert(const hal::V1_1::Model& model) {
     auto operations = NN_TRY(convert(model.operations));
 
     // Verify number of consumers.
@@ -90,9 +90,9 @@
     CHECK(model.operands.size() == numberOfConsumers.size());
     for (size_t i = 0; i < model.operands.size(); ++i) {
         if (model.operands[i].numberOfConsumers != numberOfConsumers[i]) {
-            return NN_ERROR() << "Invalid numberOfConsumers for operand " << i << ", expected "
-                              << numberOfConsumers[i] << " but found "
-                              << model.operands[i].numberOfConsumers;
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                   << "Invalid numberOfConsumers for operand " << i << ", expected "
+                   << numberOfConsumers[i] << " but found " << model.operands[i].numberOfConsumers;
         }
     }
 
@@ -111,7 +111,8 @@
     };
 }
 
-Result<ExecutionPreference> convert(const hal::V1_1::ExecutionPreference& executionPreference) {
+GeneralResult<ExecutionPreference> convert(
+        const hal::V1_1::ExecutionPreference& executionPreference) {
     return static_cast<ExecutionPreference>(executionPreference);
 }
 
@@ -122,20 +123,20 @@
 
 using utils::convert;
 
-nn::Result<V1_0::PerformanceInfo> convert(
+nn::GeneralResult<V1_0::PerformanceInfo> convert(
         const nn::Capabilities::PerformanceInfo& performanceInfo) {
     return V1_0::utils::convert(performanceInfo);
 }
 
-nn::Result<V1_0::Operand> convert(const nn::Operand& operand) {
+nn::GeneralResult<V1_0::Operand> convert(const nn::Operand& operand) {
     return V1_0::utils::convert(operand);
 }
 
-nn::Result<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
+nn::GeneralResult<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
     return V1_0::utils::convert(operandValues);
 }
 
-nn::Result<hidl_memory> convert(const nn::Memory& memory) {
+nn::GeneralResult<hidl_memory> convert(const nn::Memory& memory) {
     return V1_0::utils::convert(memory);
 }
 
@@ -143,7 +144,7 @@
 using convertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-nn::Result<hidl_vec<convertOutput<Type>>> convert(const std::vector<Type>& arguments) {
+nn::GeneralResult<hidl_vec<convertOutput<Type>>> convert(const std::vector<Type>& arguments) {
     hidl_vec<convertOutput<Type>> halObject(arguments.size());
     for (size_t i = 0; i < arguments.size(); ++i) {
         halObject[i] = NN_TRY(convert(arguments[i]));
@@ -153,11 +154,11 @@
 
 }  // anonymous namespace
 
-nn::Result<OperationType> convert(const nn::OperationType& operationType) {
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities) {
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities) {
     return Capabilities{
             .float32Performance = NN_TRY(convert(
                     capabilities.operandPerformance.lookup(nn::OperandType::TENSOR_FLOAT32))),
@@ -168,7 +169,7 @@
     };
 }
 
-nn::Result<Operation> convert(const nn::Operation& operation) {
+nn::GeneralResult<Operation> convert(const nn::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -176,9 +177,10 @@
     };
 }
 
-nn::Result<Model> convert(const nn::Model& model) {
+nn::GeneralResult<Model> convert(const nn::Model& model) {
     if (!hal::utils::hasNoPointerData(model)) {
-        return NN_ERROR() << "Mdoel cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Mdoel cannot be converted because it contains pointer-based memory";
     }
 
     auto operands = NN_TRY(convert(model.main.operands));
@@ -202,7 +204,7 @@
     };
 }
 
-nn::Result<ExecutionPreference> convert(const nn::ExecutionPreference& executionPreference) {
+nn::GeneralResult<ExecutionPreference> convert(const nn::ExecutionPreference& executionPreference) {
     return static_cast<ExecutionPreference>(executionPreference);
 }
 
diff --git a/neuralnetworks/1.1/utils/src/Device.cpp b/neuralnetworks/1.1/utils/src/Device.cpp
new file mode 100644
index 0000000..a0378c9
--- /dev/null
+++ b/neuralnetworks/1.1/utils/src/Device.cpp
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Device.h"
+
+#include "Conversions.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/IDevice.h>
+#include <android/hardware/neuralnetworks/1.1/types.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Callbacks.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_1::utils {
+namespace {
+
+nn::GeneralResult<nn::Capabilities> initCapabilities(V1_1::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<nn::Capabilities> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                 << "uninitialized";
+    const auto cb = [&result](V1_0::ErrorStatus status, const Capabilities& capabilities) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "getCapabilities_1_1 failed with " << toString(status);
+        } else {
+            result = validatedConvertToCanonical(capabilities);
+        }
+    };
+
+    const auto ret = device->getCapabilities_1_1(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+}  // namespace
+
+nn::GeneralResult<std::shared_ptr<const Device>> Device::create(std::string name,
+                                                                sp<V1_1::IDevice> device) {
+    if (name.empty()) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_1::utils::Device::create must have non-empty name";
+    }
+    if (device == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_1::utils::Device::create must have non-null device";
+    }
+
+    auto capabilities = NN_TRY(initCapabilities(device.get()));
+
+    auto deathHandler = NN_TRY(hal::utils::DeathHandler::create(device));
+    return std::make_shared<const Device>(PrivateConstructorTag{}, std::move(name),
+                                          std::move(capabilities), std::move(device),
+                                          std::move(deathHandler));
+}
+
+Device::Device(PrivateConstructorTag /*tag*/, std::string name, nn::Capabilities capabilities,
+               sp<V1_1::IDevice> device, hal::utils::DeathHandler deathHandler)
+    : kName(std::move(name)),
+      kCapabilities(std::move(capabilities)),
+      kDevice(std::move(device)),
+      kDeathHandler(std::move(deathHandler)) {}
+
+const std::string& Device::getName() const {
+    return kName;
+}
+
+const std::string& Device::getVersionString() const {
+    return kVersionString;
+}
+
+nn::Version Device::getFeatureLevel() const {
+    return nn::Version::ANDROID_P;
+}
+
+nn::DeviceType Device::getType() const {
+    return nn::DeviceType::UNKNOWN;
+}
+
+const std::vector<nn::Extension>& Device::getSupportedExtensions() const {
+    return kExtensions;
+}
+
+const nn::Capabilities& Device::getCapabilities() const {
+    return kCapabilities;
+}
+
+std::pair<uint32_t, uint32_t> Device::getNumberOfCacheFilesNeeded() const {
+    return std::make_pair(/*numModelCache=*/0, /*numDataCache=*/0);
+}
+
+nn::GeneralResult<void> Device::wait() const {
+    const auto ret = kDevice->ping();
+    return hal::utils::handleTransportError(ret);
+}
+
+nn::GeneralResult<std::vector<bool>> Device::getSupportedOperations(const nn::Model& model) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+
+    nn::GeneralResult<std::vector<bool>> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                  << "uninitialized";
+    auto cb = [&result, &model](V1_0::ErrorStatus status,
+                                const hidl_vec<bool>& supportedOperations) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical)
+                     << "getSupportedOperations_1_1 failed with " << toString(status);
+        } else if (supportedOperations.size() != model.main.operations.size()) {
+            result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                     << "getSupportedOperations_1_1 returned vector of size "
+                     << supportedOperations.size() << " but expected "
+                     << model.main.operations.size();
+        } else {
+            result = supportedOperations;
+        }
+    };
+
+    const auto ret = kDevice->getSupportedOperations_1_1(hidlModel, cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModel(
+        const nn::Model& model, nn::ExecutionPreference preference, nn::Priority /*priority*/,
+        nn::OptionalTimePoint /*deadline*/, const std::vector<nn::SharedHandle>& /*modelCache*/,
+        const std::vector<nn::SharedHandle>& /*dataCache*/, const nn::CacheToken& /*token*/) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+    const auto hidlPreference = NN_TRY(convert(preference));
+
+    const auto cb = sp<V1_0::utils::PreparedModelCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret = kDevice->prepareModel_1_1(hidlModel, hidlPreference, cb);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "prepareModel failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModelFromCache(
+        nn::OptionalTimePoint /*deadline*/, const std::vector<nn::SharedHandle>& /*modelCache*/,
+        const std::vector<nn::SharedHandle>& /*dataCache*/, const nn::CacheToken& /*token*/) const {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "IDevice::prepareModelFromCache not supported on 1.1 HAL service";
+}
+
+nn::GeneralResult<nn::SharedBuffer> Device::allocate(
+        const nn::BufferDesc& /*desc*/,
+        const std::vector<nn::SharedPreparedModel>& /*preparedModels*/,
+        const std::vector<nn::BufferRole>& /*inputRoles*/,
+        const std::vector<nn::BufferRole>& /*outputRoles*/) const {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "IDevice::allocate not supported on 1.1 HAL service";
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_1::utils
diff --git a/neuralnetworks/1.1/utils/src/Service.cpp b/neuralnetworks/1.1/utils/src/Service.cpp
new file mode 100644
index 0000000..e2d3240
--- /dev/null
+++ b/neuralnetworks/1.1/utils/src/Service.cpp
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Service.h"
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/ResilientDevice.h>
+#include <string>
+#include "Device.h"
+
+namespace android::hardware::neuralnetworks::V1_1::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name) {
+    hal::utils::ResilientDevice::Factory makeDevice =
+            [name](bool blocking) -> nn::GeneralResult<nn::SharedDevice> {
+        auto service = blocking ? IDevice::getService(name) : IDevice::tryGetService(name);
+        if (service == nullptr) {
+            return NN_ERROR() << (blocking ? "getService" : "tryGetService") << " returned nullptr";
+        }
+        return Device::create(name, std::move(service));
+    };
+
+    return hal::utils::ResilientDevice::create(std::move(makeDevice));
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_1::utils
diff --git a/neuralnetworks/1.2/utils/Android.bp b/neuralnetworks/1.2/utils/Android.bp
index a1dd3d0..22e8659 100644
--- a/neuralnetworks/1.2/utils/Android.bp
+++ b/neuralnetworks/1.2/utils/Android.bp
@@ -20,6 +20,7 @@
     srcs: ["src/*"],
     local_include_dirs: ["include/nnapi/hal/1.2/"],
     export_include_dirs: ["include"],
+    cflags: ["-Wthread-safety"],
     static_libs: [
         "neuralnetworks_types",
         "neuralnetworks_utils_hal_common",
diff --git a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Callbacks.h b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Callbacks.h
new file mode 100644
index 0000000..bc7d92a
--- /dev/null
+++ b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Callbacks.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_CALLBACKS_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_CALLBACKS_H
+
+#include <android/hardware/neuralnetworks/1.0/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.0/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.2/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.2/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Callbacks.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+#include <nnapi/hal/TransferValue.h>
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+
+class PreparedModelCallback final : public IPreparedModelCallback,
+                                    public hal::utils::IProtectedCallback {
+  public:
+    using Data = nn::GeneralResult<nn::SharedPreparedModel>;
+
+    Return<void> notify(V1_0::ErrorStatus status,
+                        const sp<V1_0::IPreparedModel>& preparedModel) override;
+    Return<void> notify_1_2(V1_0::ErrorStatus status,
+                            const sp<IPreparedModel>& preparedModel) override;
+
+    void notifyAsDeadObject() override;
+
+    Data get();
+
+  private:
+    void notifyInternal(Data result);
+
+    hal::utils::TransferValue<Data> mData;
+};
+
+class ExecutionCallback final : public IExecutionCallback, public hal::utils::IProtectedCallback {
+  public:
+    using Data = nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>;
+
+    Return<void> notify(V1_0::ErrorStatus status) override;
+    Return<void> notify_1_2(V1_0::ErrorStatus status, const hidl_vec<OutputShape>& outputShapes,
+                            const Timing& timing) override;
+
+    void notifyAsDeadObject() override;
+
+    Data get();
+
+  private:
+    void notifyInternal(Data result);
+
+    hal::utils::TransferValue<Data> mData;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_CALLBACKS_H
diff --git a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Conversions.h b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Conversions.h
index 81bf792..24911fe 100644
--- a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Conversions.h
+++ b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Conversions.h
@@ -24,62 +24,64 @@
 
 namespace android::nn {
 
-Result<OperandType> convert(const hal::V1_2::OperandType& operandType);
-Result<OperationType> convert(const hal::V1_2::OperationType& operationType);
-Result<DeviceType> convert(const hal::V1_2::DeviceType& deviceType);
-Result<Capabilities> convert(const hal::V1_2::Capabilities& capabilities);
-Result<Capabilities::OperandPerformance> convert(
+GeneralResult<OperandType> convert(const hal::V1_2::OperandType& operandType);
+GeneralResult<OperationType> convert(const hal::V1_2::OperationType& operationType);
+GeneralResult<DeviceType> convert(const hal::V1_2::DeviceType& deviceType);
+GeneralResult<Capabilities> convert(const hal::V1_2::Capabilities& capabilities);
+GeneralResult<Capabilities::OperandPerformance> convert(
         const hal::V1_2::Capabilities::OperandPerformance& operandPerformance);
-Result<Operation> convert(const hal::V1_2::Operation& operation);
-Result<Operand::SymmPerChannelQuantParams> convert(
+GeneralResult<Operation> convert(const hal::V1_2::Operation& operation);
+GeneralResult<Operand::SymmPerChannelQuantParams> convert(
         const hal::V1_2::SymmPerChannelQuantParams& symmPerChannelQuantParams);
-Result<Operand> convert(const hal::V1_2::Operand& operand);
-Result<Operand::ExtraParams> convert(const hal::V1_2::Operand::ExtraParams& extraParams);
-Result<Model> convert(const hal::V1_2::Model& model);
-Result<Model::ExtensionNameAndPrefix> convert(
+GeneralResult<Operand> convert(const hal::V1_2::Operand& operand);
+GeneralResult<Operand::ExtraParams> convert(const hal::V1_2::Operand::ExtraParams& extraParams);
+GeneralResult<Model> convert(const hal::V1_2::Model& model);
+GeneralResult<Model::ExtensionNameAndPrefix> convert(
         const hal::V1_2::Model::ExtensionNameAndPrefix& extensionNameAndPrefix);
-Result<OutputShape> convert(const hal::V1_2::OutputShape& outputShape);
-Result<MeasureTiming> convert(const hal::V1_2::MeasureTiming& measureTiming);
-Result<Timing> convert(const hal::V1_2::Timing& timing);
-Result<Extension> convert(const hal::V1_2::Extension& extension);
-Result<Extension::OperandTypeInformation> convert(
+GeneralResult<OutputShape> convert(const hal::V1_2::OutputShape& outputShape);
+GeneralResult<MeasureTiming> convert(const hal::V1_2::MeasureTiming& measureTiming);
+GeneralResult<Timing> convert(const hal::V1_2::Timing& timing);
+GeneralResult<Extension> convert(const hal::V1_2::Extension& extension);
+GeneralResult<Extension::OperandTypeInformation> convert(
         const hal::V1_2::Extension::OperandTypeInformation& operandTypeInformation);
-Result<NativeHandle> convert(const hardware::hidl_handle& handle);
+GeneralResult<SharedHandle> convert(const hardware::hidl_handle& handle);
 
-Result<std::vector<Extension>> convert(const hardware::hidl_vec<hal::V1_2::Extension>& extensions);
-Result<std::vector<NativeHandle>> convert(const hardware::hidl_vec<hardware::hidl_handle>& handles);
-Result<std::vector<OutputShape>> convert(
+GeneralResult<std::vector<Extension>> convert(
+        const hardware::hidl_vec<hal::V1_2::Extension>& extensions);
+GeneralResult<std::vector<SharedHandle>> convert(
+        const hardware::hidl_vec<hardware::hidl_handle>& handles);
+GeneralResult<std::vector<OutputShape>> convert(
         const hardware::hidl_vec<hal::V1_2::OutputShape>& outputShapes);
 
 }  // namespace android::nn
 
 namespace android::hardware::neuralnetworks::V1_2::utils {
 
-nn::Result<OperandType> convert(const nn::OperandType& operandType);
-nn::Result<OperationType> convert(const nn::OperationType& operationType);
-nn::Result<DeviceType> convert(const nn::DeviceType& deviceType);
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities);
-nn::Result<Capabilities::OperandPerformance> convert(
+nn::GeneralResult<OperandType> convert(const nn::OperandType& operandType);
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType);
+nn::GeneralResult<DeviceType> convert(const nn::DeviceType& deviceType);
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities);
+nn::GeneralResult<Capabilities::OperandPerformance> convert(
         const nn::Capabilities::OperandPerformance& operandPerformance);
-nn::Result<Operation> convert(const nn::Operation& operation);
-nn::Result<SymmPerChannelQuantParams> convert(
+nn::GeneralResult<Operation> convert(const nn::Operation& operation);
+nn::GeneralResult<SymmPerChannelQuantParams> convert(
         const nn::Operand::SymmPerChannelQuantParams& symmPerChannelQuantParams);
-nn::Result<Operand> convert(const nn::Operand& operand);
-nn::Result<Operand::ExtraParams> convert(const nn::Operand::ExtraParams& extraParams);
-nn::Result<Model> convert(const nn::Model& model);
-nn::Result<Model::ExtensionNameAndPrefix> convert(
+nn::GeneralResult<Operand> convert(const nn::Operand& operand);
+nn::GeneralResult<Operand::ExtraParams> convert(const nn::Operand::ExtraParams& extraParams);
+nn::GeneralResult<Model> convert(const nn::Model& model);
+nn::GeneralResult<Model::ExtensionNameAndPrefix> convert(
         const nn::Model::ExtensionNameAndPrefix& extensionNameAndPrefix);
-nn::Result<OutputShape> convert(const nn::OutputShape& outputShape);
-nn::Result<MeasureTiming> convert(const nn::MeasureTiming& measureTiming);
-nn::Result<Timing> convert(const nn::Timing& timing);
-nn::Result<Extension> convert(const nn::Extension& extension);
-nn::Result<Extension::OperandTypeInformation> convert(
+nn::GeneralResult<OutputShape> convert(const nn::OutputShape& outputShape);
+nn::GeneralResult<MeasureTiming> convert(const nn::MeasureTiming& measureTiming);
+nn::GeneralResult<Timing> convert(const nn::Timing& timing);
+nn::GeneralResult<Extension> convert(const nn::Extension& extension);
+nn::GeneralResult<Extension::OperandTypeInformation> convert(
         const nn::Extension::OperandTypeInformation& operandTypeInformation);
-nn::Result<hidl_handle> convert(const nn::NativeHandle& handle);
+nn::GeneralResult<hidl_handle> convert(const nn::SharedHandle& handle);
 
-nn::Result<hidl_vec<Extension>> convert(const std::vector<nn::Extension>& extensions);
-nn::Result<hidl_vec<hidl_handle>> convert(const std::vector<nn::NativeHandle>& handles);
-nn::Result<hidl_vec<OutputShape>> convert(const std::vector<nn::OutputShape>& outputShapes);
+nn::GeneralResult<hidl_vec<Extension>> convert(const std::vector<nn::Extension>& extensions);
+nn::GeneralResult<hidl_vec<hidl_handle>> convert(const std::vector<nn::SharedHandle>& handles);
+nn::GeneralResult<hidl_vec<OutputShape>> convert(const std::vector<nn::OutputShape>& outputShapes);
 
 }  // namespace android::hardware::neuralnetworks::V1_2::utils
 
diff --git a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Device.h b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Device.h
new file mode 100644
index 0000000..a68830d
--- /dev/null
+++ b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Device.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_DEVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_DEVICE_H
+
+#include <android/hardware/neuralnetworks/1.2/IDevice.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+
+nn::GeneralResult<std::string> initVersionString(V1_2::IDevice* device);
+nn::GeneralResult<nn::DeviceType> initDeviceType(V1_2::IDevice* device);
+nn::GeneralResult<std::vector<nn::Extension>> initExtensions(V1_2::IDevice* device);
+nn::GeneralResult<std::pair<uint32_t, uint32_t>> initNumberOfCacheFilesNeeded(
+        V1_2::IDevice* device);
+
+class Device final : public nn::IDevice {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const Device>> create(std::string name,
+                                                                   sp<V1_2::IDevice> device);
+
+    Device(PrivateConstructorTag tag, std::string name, std::string versionString,
+           nn::DeviceType deviceType, std::vector<nn::Extension> extensions,
+           nn::Capabilities capabilities, std::pair<uint32_t, uint32_t> numberOfCacheFilesNeeded,
+           sp<V1_2::IDevice> device, hal::utils::DeathHandler deathHandler);
+
+    const std::string& getName() const override;
+    const std::string& getVersionString() const override;
+    nn::Version getFeatureLevel() const override;
+    nn::DeviceType getType() const override;
+    const std::vector<nn::Extension>& getSupportedExtensions() const override;
+    const nn::Capabilities& getCapabilities() const override;
+    std::pair<uint32_t, uint32_t> getNumberOfCacheFilesNeeded() const override;
+
+    nn::GeneralResult<void> wait() const override;
+
+    nn::GeneralResult<std::vector<bool>> getSupportedOperations(
+            const nn::Model& model) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModel(
+            const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelFromCache(
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedBuffer> allocate(
+            const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+            const std::vector<nn::BufferRole>& inputRoles,
+            const std::vector<nn::BufferRole>& outputRoles) const override;
+
+  private:
+    const std::string kName;
+    const std::string kVersionString;
+    const nn::DeviceType kDeviceType;
+    const std::vector<nn::Extension> kExtensions;
+    const nn::Capabilities kCapabilities;
+    const std::pair<uint32_t, uint32_t> kNumberOfCacheFilesNeeded;
+    const sp<V1_2::IDevice> kDevice;
+    const hal::utils::DeathHandler kDeathHandler;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_DEVICE_H
diff --git a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/PreparedModel.h b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/PreparedModel.h
new file mode 100644
index 0000000..65e1e8a
--- /dev/null
+++ b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/PreparedModel.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_PREPARED_MODEL_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_PREPARED_MODEL_H
+
+#include <android/hardware/neuralnetworks/1.2/IPreparedModel.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <memory>
+#include <tuple>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+
+class PreparedModel final : public nn::IPreparedModel {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const PreparedModel>> create(
+            sp<V1_2::IPreparedModel> preparedModel);
+
+    PreparedModel(PrivateConstructorTag tag, sp<V1_2::IPreparedModel> preparedModel,
+                  hal::utils::DeathHandler deathHandler);
+
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> execute(
+            const nn::Request& request, nn::MeasureTiming measure,
+            const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration) const override;
+
+    nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>> executeFenced(
+            const nn::Request& request, const std::vector<nn::SyncFence>& waitFor,
+            nn::MeasureTiming measure, const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration,
+            const nn::OptionalTimeoutDuration& timeoutDurationAfterFence) const override;
+
+    std::any getUnderlyingResource() const override;
+
+  private:
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> executeSynchronously(
+            const V1_0::Request& request, MeasureTiming measure) const;
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> executeAsynchronously(
+            const V1_0::Request& request, MeasureTiming measure) const;
+
+    const sp<V1_2::IPreparedModel> kPreparedModel;
+    const hal::utils::DeathHandler kDeathHandler;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_PREPARED_MODEL_H
diff --git a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Service.h b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Service.h
new file mode 100644
index 0000000..44f004f
--- /dev/null
+++ b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Service.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_SERVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_SERVICE_H
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <string>
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name);
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_2_UTILS_SERVICE_H
diff --git a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Utils.h b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Utils.h
index b1c2f1a..a9a6bae 100644
--- a/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Utils.h
+++ b/neuralnetworks/1.2/utils/include/nnapi/hal/1.2/Utils.h
@@ -22,6 +22,7 @@
 #include <android-base/logging.h>
 #include <android/hardware/neuralnetworks/1.2/types.h>
 #include <nnapi/Result.h>
+#include <nnapi/TypeUtils.h>
 #include <nnapi/Types.h>
 #include <nnapi/Validation.h>
 #include <nnapi/hal/1.0/Conversions.h>
@@ -38,10 +39,14 @@
 
 template <typename Type>
 nn::Result<void> validate(const Type& halObject) {
-    const auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeCanonical = nn::convert(halObject);
+    if (!maybeCanonical.has_value()) {
+        return nn::error() << maybeCanonical.error().message;
+    }
+    const auto version = NN_TRY(nn::validate(maybeCanonical.value()));
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return {};
 }
@@ -58,9 +63,14 @@
 template <typename Type>
 decltype(nn::convert(std::declval<Type>())) validatedConvertToCanonical(const Type& halObject) {
     auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeVersion = nn::validate(canonical);
+    if (!maybeVersion.has_value()) {
+        return nn::error() << maybeVersion.error();
+    }
+    const auto version = maybeVersion.value();
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return canonical;
 }
diff --git a/neuralnetworks/1.2/utils/src/Callbacks.cpp b/neuralnetworks/1.2/utils/src/Callbacks.cpp
new file mode 100644
index 0000000..cb739f0
--- /dev/null
+++ b/neuralnetworks/1.2/utils/src/Callbacks.cpp
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Callbacks.h"
+
+#include "Conversions.h"
+#include "PreparedModel.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.2/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.2/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Conversions.h>
+#include <nnapi/hal/1.0/PreparedModel.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+#include <nnapi/hal/TransferValue.h>
+
+#include <utility>
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+namespace {
+
+nn::GeneralResult<nn::SharedPreparedModel> convertPreparedModel(
+        const sp<V1_0::IPreparedModel>& preparedModel) {
+    return NN_TRY(V1_0::utils::PreparedModel::create(preparedModel));
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> convertPreparedModel(
+        const sp<IPreparedModel>& preparedModel) {
+    return NN_TRY(utils::PreparedModel::create(preparedModel));
+}
+
+nn::GeneralResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+convertExecutionGeneralResultsHelper(const hidl_vec<OutputShape>& outputShapes,
+                                     const Timing& timing) {
+    return std::make_pair(NN_TRY(validatedConvertToCanonical(outputShapes)),
+                          NN_TRY(validatedConvertToCanonical(timing)));
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+convertExecutionGeneralResults(const hidl_vec<OutputShape>& outputShapes, const Timing& timing) {
+    return hal::utils::makeExecutionFailure(
+            convertExecutionGeneralResultsHelper(outputShapes, timing));
+}
+
+}  // namespace
+
+Return<void> PreparedModelCallback::notify(V1_0::ErrorStatus status,
+                                           const sp<V1_0::IPreparedModel>& preparedModel) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "preparedModel failed with " << toString(status));
+    } else if (preparedModel == nullptr) {
+        notifyInternal(NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                       << "Returned preparedModel is nullptr");
+    } else {
+        notifyInternal(convertPreparedModel(preparedModel));
+    }
+    return Void();
+}
+
+Return<void> PreparedModelCallback::notify_1_2(V1_0::ErrorStatus status,
+                                               const sp<IPreparedModel>& preparedModel) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "preparedModel failed with " << toString(status));
+    } else if (preparedModel == nullptr) {
+        notifyInternal(NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                       << "Returned preparedModel is nullptr");
+    } else {
+        notifyInternal(convertPreparedModel(preparedModel));
+    }
+    return Void();
+}
+
+void PreparedModelCallback::notifyAsDeadObject() {
+    notifyInternal(NN_ERROR(nn::ErrorStatus::DEAD_OBJECT) << "Dead object");
+}
+
+PreparedModelCallback::Data PreparedModelCallback::get() {
+    return mData.take();
+}
+
+void PreparedModelCallback::notifyInternal(PreparedModelCallback::Data result) {
+    mData.put(std::move(result));
+}
+
+// ExecutionCallback methods begin here
+
+Return<void> ExecutionCallback::notify(V1_0::ErrorStatus status) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "execute failed with " << toString(status));
+    } else {
+        notifyInternal({});
+    }
+    return Void();
+}
+
+Return<void> ExecutionCallback::notify_1_2(V1_0::ErrorStatus status,
+                                           const hidl_vec<OutputShape>& outputShapes,
+                                           const Timing& timing) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "execute failed with " << toString(status));
+    } else {
+        notifyInternal(convertExecutionGeneralResults(outputShapes, timing));
+    }
+    return Void();
+}
+
+void ExecutionCallback::notifyAsDeadObject() {
+    notifyInternal(NN_ERROR(nn::ErrorStatus::DEAD_OBJECT) << "Dead object");
+}
+
+ExecutionCallback::Data ExecutionCallback::get() {
+    return mData.take();
+}
+
+void ExecutionCallback::notifyInternal(ExecutionCallback::Data result) {
+    mData.put(std::move(result));
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
diff --git a/neuralnetworks/1.2/utils/src/Conversions.cpp b/neuralnetworks/1.2/utils/src/Conversions.cpp
index fed314b..08c94de 100644
--- a/neuralnetworks/1.2/utils/src/Conversions.cpp
+++ b/neuralnetworks/1.2/utils/src/Conversions.cpp
@@ -26,6 +26,7 @@
 #include <nnapi/Types.h>
 #include <nnapi/hal/1.0/Conversions.h>
 #include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
 
 #include <algorithm>
 #include <functional>
@@ -78,7 +79,7 @@
 using ConvertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-Result<std::vector<ConvertOutput<Type>>> convertVec(const hidl_vec<Type>& arguments) {
+GeneralResult<std::vector<ConvertOutput<Type>>> convertVec(const hidl_vec<Type>& arguments) {
     std::vector<ConvertOutput<Type>> canonical;
     canonical.reserve(arguments.size());
     for (const auto& argument : arguments) {
@@ -88,25 +89,25 @@
 }
 
 template <typename Type>
-Result<std::vector<ConvertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
+GeneralResult<std::vector<ConvertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
     return convertVec(arguments);
 }
 
 }  // anonymous namespace
 
-Result<OperandType> convert(const hal::V1_2::OperandType& operandType) {
+GeneralResult<OperandType> convert(const hal::V1_2::OperandType& operandType) {
     return static_cast<OperandType>(operandType);
 }
 
-Result<OperationType> convert(const hal::V1_2::OperationType& operationType) {
+GeneralResult<OperationType> convert(const hal::V1_2::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-Result<DeviceType> convert(const hal::V1_2::DeviceType& deviceType) {
+GeneralResult<DeviceType> convert(const hal::V1_2::DeviceType& deviceType) {
     return static_cast<DeviceType>(deviceType);
 }
 
-Result<Capabilities> convert(const hal::V1_2::Capabilities& capabilities) {
+GeneralResult<Capabilities> convert(const hal::V1_2::Capabilities& capabilities) {
     const bool validOperandTypes = std::all_of(
             capabilities.operandPerformance.begin(), capabilities.operandPerformance.end(),
             [](const hal::V1_2::Capabilities::OperandPerformance& operandPerformance) {
@@ -114,7 +115,7 @@
                 return !maybeType.has_value() ? false : validOperandType(maybeType.value());
             });
     if (!validOperandTypes) {
-        return NN_ERROR()
+        return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
                << "Invalid OperandType when converting OperandPerformance in Capabilities";
     }
 
@@ -124,8 +125,9 @@
             NN_TRY(convert(capabilities.relaxedFloat32toFloat16PerformanceTensor));
     auto operandPerformance = NN_TRY(convert(capabilities.operandPerformance));
 
-    auto table =
-            NN_TRY(Capabilities::OperandPerformanceTable::create(std::move(operandPerformance)));
+    auto table = NN_TRY(hal::utils::makeGeneralFailure(
+            Capabilities::OperandPerformanceTable::create(std::move(operandPerformance)),
+            nn::ErrorStatus::GENERAL_FAILURE));
 
     return Capabilities{
             .relaxedFloat32toFloat16PerformanceScalar = relaxedFloat32toFloat16PerformanceScalar,
@@ -134,7 +136,7 @@
     };
 }
 
-Result<Capabilities::OperandPerformance> convert(
+GeneralResult<Capabilities::OperandPerformance> convert(
         const hal::V1_2::Capabilities::OperandPerformance& operandPerformance) {
     return Capabilities::OperandPerformance{
             .type = NN_TRY(convert(operandPerformance.type)),
@@ -142,7 +144,7 @@
     };
 }
 
-Result<Operation> convert(const hal::V1_2::Operation& operation) {
+GeneralResult<Operation> convert(const hal::V1_2::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -150,7 +152,7 @@
     };
 }
 
-Result<Operand::SymmPerChannelQuantParams> convert(
+GeneralResult<Operand::SymmPerChannelQuantParams> convert(
         const hal::V1_2::SymmPerChannelQuantParams& symmPerChannelQuantParams) {
     return Operand::SymmPerChannelQuantParams{
             .scales = symmPerChannelQuantParams.scales,
@@ -158,7 +160,7 @@
     };
 }
 
-Result<Operand> convert(const hal::V1_2::Operand& operand) {
+GeneralResult<Operand> convert(const hal::V1_2::Operand& operand) {
     return Operand{
             .type = NN_TRY(convert(operand.type)),
             .dimensions = operand.dimensions,
@@ -170,7 +172,7 @@
     };
 }
 
-Result<Operand::ExtraParams> convert(const hal::V1_2::Operand::ExtraParams& extraParams) {
+GeneralResult<Operand::ExtraParams> convert(const hal::V1_2::Operand::ExtraParams& extraParams) {
     using Discriminator = hal::V1_2::Operand::ExtraParams::hidl_discriminator;
     switch (extraParams.getDiscriminator()) {
         case Discriminator::none:
@@ -180,11 +182,12 @@
         case Discriminator::extension:
             return extraParams.extension();
     }
-    return NN_ERROR() << "Unrecognized Operand::ExtraParams discriminator: "
-                      << underlyingType(extraParams.getDiscriminator());
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "Unrecognized Operand::ExtraParams discriminator: "
+           << underlyingType(extraParams.getDiscriminator());
 }
 
-Result<Model> convert(const hal::V1_2::Model& model) {
+GeneralResult<Model> convert(const hal::V1_2::Model& model) {
     auto operations = NN_TRY(convert(model.operations));
 
     // Verify number of consumers.
@@ -193,9 +196,9 @@
     CHECK(model.operands.size() == numberOfConsumers.size());
     for (size_t i = 0; i < model.operands.size(); ++i) {
         if (model.operands[i].numberOfConsumers != numberOfConsumers[i]) {
-            return NN_ERROR() << "Invalid numberOfConsumers for operand " << i << ", expected "
-                              << numberOfConsumers[i] << " but found "
-                              << model.operands[i].numberOfConsumers;
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                   << "Invalid numberOfConsumers for operand " << i << ", expected "
+                   << numberOfConsumers[i] << " but found " << model.operands[i].numberOfConsumers;
         }
     }
 
@@ -215,7 +218,7 @@
     };
 }
 
-Result<Model::ExtensionNameAndPrefix> convert(
+GeneralResult<Model::ExtensionNameAndPrefix> convert(
         const hal::V1_2::Model::ExtensionNameAndPrefix& extensionNameAndPrefix) {
     return Model::ExtensionNameAndPrefix{
             .name = extensionNameAndPrefix.name,
@@ -223,29 +226,29 @@
     };
 }
 
-Result<OutputShape> convert(const hal::V1_2::OutputShape& outputShape) {
+GeneralResult<OutputShape> convert(const hal::V1_2::OutputShape& outputShape) {
     return OutputShape{
             .dimensions = outputShape.dimensions,
             .isSufficient = outputShape.isSufficient,
     };
 }
 
-Result<MeasureTiming> convert(const hal::V1_2::MeasureTiming& measureTiming) {
+GeneralResult<MeasureTiming> convert(const hal::V1_2::MeasureTiming& measureTiming) {
     return static_cast<MeasureTiming>(measureTiming);
 }
 
-Result<Timing> convert(const hal::V1_2::Timing& timing) {
+GeneralResult<Timing> convert(const hal::V1_2::Timing& timing) {
     return Timing{.timeOnDevice = timing.timeOnDevice, .timeInDriver = timing.timeInDriver};
 }
 
-Result<Extension> convert(const hal::V1_2::Extension& extension) {
+GeneralResult<Extension> convert(const hal::V1_2::Extension& extension) {
     return Extension{
             .name = extension.name,
             .operandTypes = NN_TRY(convert(extension.operandTypes)),
     };
 }
 
-Result<Extension::OperandTypeInformation> convert(
+GeneralResult<Extension::OperandTypeInformation> convert(
         const hal::V1_2::Extension::OperandTypeInformation& operandTypeInformation) {
     return Extension::OperandTypeInformation{
             .type = operandTypeInformation.type,
@@ -254,20 +257,20 @@
     };
 }
 
-Result<NativeHandle> convert(const hidl_handle& handle) {
-    auto* cloned = native_handle_clone(handle.getNativeHandle());
-    return ::android::NativeHandle::create(cloned, /*ownsHandle=*/true);
+GeneralResult<SharedHandle> convert(const hidl_handle& hidlHandle) {
+    return hal::utils::sharedHandleFromNativeHandle(hidlHandle.getNativeHandle());
 }
 
-Result<std::vector<Extension>> convert(const hidl_vec<hal::V1_2::Extension>& extensions) {
+GeneralResult<std::vector<Extension>> convert(const hidl_vec<hal::V1_2::Extension>& extensions) {
     return convertVec(extensions);
 }
 
-Result<std::vector<NativeHandle>> convert(const hidl_vec<hidl_handle>& handles) {
+GeneralResult<std::vector<SharedHandle>> convert(const hidl_vec<hidl_handle>& handles) {
     return convertVec(handles);
 }
 
-Result<std::vector<OutputShape>> convert(const hidl_vec<hal::V1_2::OutputShape>& outputShapes) {
+GeneralResult<std::vector<OutputShape>> convert(
+        const hidl_vec<hal::V1_2::OutputShape>& outputShapes) {
     return convertVec(outputShapes);
 }
 
@@ -278,24 +281,24 @@
 
 using utils::convert;
 
-nn::Result<V1_0::OperandLifeTime> convert(const nn::Operand::LifeTime& lifetime) {
+nn::GeneralResult<V1_0::OperandLifeTime> convert(const nn::Operand::LifeTime& lifetime) {
     return V1_0::utils::convert(lifetime);
 }
 
-nn::Result<V1_0::PerformanceInfo> convert(
+nn::GeneralResult<V1_0::PerformanceInfo> convert(
         const nn::Capabilities::PerformanceInfo& performanceInfo) {
     return V1_0::utils::convert(performanceInfo);
 }
 
-nn::Result<V1_0::DataLocation> convert(const nn::DataLocation& location) {
+nn::GeneralResult<V1_0::DataLocation> convert(const nn::DataLocation& location) {
     return V1_0::utils::convert(location);
 }
 
-nn::Result<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
+nn::GeneralResult<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
     return V1_0::utils::convert(operandValues);
 }
 
-nn::Result<hidl_memory> convert(const nn::Memory& memory) {
+nn::GeneralResult<hidl_memory> convert(const nn::Memory& memory) {
     return V1_0::utils::convert(memory);
 }
 
@@ -303,7 +306,7 @@
 using ConvertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-nn::Result<hidl_vec<ConvertOutput<Type>>> convertVec(const std::vector<Type>& arguments) {
+nn::GeneralResult<hidl_vec<ConvertOutput<Type>>> convertVec(const std::vector<Type>& arguments) {
     hidl_vec<ConvertOutput<Type>> halObject(arguments.size());
     for (size_t i = 0; i < arguments.size(); ++i) {
         halObject[i] = NN_TRY(convert(arguments[i]));
@@ -312,22 +315,23 @@
 }
 
 template <typename Type>
-nn::Result<hidl_vec<ConvertOutput<Type>>> convert(const std::vector<Type>& arguments) {
+nn::GeneralResult<hidl_vec<ConvertOutput<Type>>> convert(const std::vector<Type>& arguments) {
     return convertVec(arguments);
 }
 
-nn::Result<Operand::ExtraParams> makeExtraParams(nn::Operand::NoParams /*noParams*/) {
+nn::GeneralResult<Operand::ExtraParams> makeExtraParams(nn::Operand::NoParams /*noParams*/) {
     return Operand::ExtraParams{};
 }
 
-nn::Result<Operand::ExtraParams> makeExtraParams(
+nn::GeneralResult<Operand::ExtraParams> makeExtraParams(
         const nn::Operand::SymmPerChannelQuantParams& channelQuant) {
     Operand::ExtraParams ret;
     ret.channelQuant(NN_TRY(convert(channelQuant)));
     return ret;
 }
 
-nn::Result<Operand::ExtraParams> makeExtraParams(const nn::Operand::ExtensionParams& extension) {
+nn::GeneralResult<Operand::ExtraParams> makeExtraParams(
+        const nn::Operand::ExtensionParams& extension) {
     Operand::ExtraParams ret;
     ret.extension(extension);
     return ret;
@@ -335,28 +339,29 @@
 
 }  // anonymous namespace
 
-nn::Result<OperandType> convert(const nn::OperandType& operandType) {
+nn::GeneralResult<OperandType> convert(const nn::OperandType& operandType) {
     return static_cast<OperandType>(operandType);
 }
 
-nn::Result<OperationType> convert(const nn::OperationType& operationType) {
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-nn::Result<DeviceType> convert(const nn::DeviceType& deviceType) {
+nn::GeneralResult<DeviceType> convert(const nn::DeviceType& deviceType) {
     switch (deviceType) {
         case nn::DeviceType::UNKNOWN:
-            return NN_ERROR() << "Invalid DeviceType UNKNOWN";
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "Invalid DeviceType UNKNOWN";
         case nn::DeviceType::OTHER:
         case nn::DeviceType::CPU:
         case nn::DeviceType::GPU:
         case nn::DeviceType::ACCELERATOR:
             return static_cast<DeviceType>(deviceType);
     }
-    return NN_ERROR() << "Invalid DeviceType " << underlyingType(deviceType);
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "Invalid DeviceType " << underlyingType(deviceType);
 }
 
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities) {
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities) {
     std::vector<nn::Capabilities::OperandPerformance> operandPerformance;
     operandPerformance.reserve(capabilities.operandPerformance.asVector().size());
     std::copy_if(capabilities.operandPerformance.asVector().begin(),
@@ -375,7 +380,7 @@
     };
 }
 
-nn::Result<Capabilities::OperandPerformance> convert(
+nn::GeneralResult<Capabilities::OperandPerformance> convert(
         const nn::Capabilities::OperandPerformance& operandPerformance) {
     return Capabilities::OperandPerformance{
             .type = NN_TRY(convert(operandPerformance.type)),
@@ -383,7 +388,7 @@
     };
 }
 
-nn::Result<Operation> convert(const nn::Operation& operation) {
+nn::GeneralResult<Operation> convert(const nn::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -391,7 +396,7 @@
     };
 }
 
-nn::Result<SymmPerChannelQuantParams> convert(
+nn::GeneralResult<SymmPerChannelQuantParams> convert(
         const nn::Operand::SymmPerChannelQuantParams& symmPerChannelQuantParams) {
     return SymmPerChannelQuantParams{
             .scales = symmPerChannelQuantParams.scales,
@@ -399,7 +404,7 @@
     };
 }
 
-nn::Result<Operand> convert(const nn::Operand& operand) {
+nn::GeneralResult<Operand> convert(const nn::Operand& operand) {
     return Operand{
             .type = NN_TRY(convert(operand.type)),
             .dimensions = operand.dimensions,
@@ -412,13 +417,14 @@
     };
 }
 
-nn::Result<Operand::ExtraParams> convert(const nn::Operand::ExtraParams& extraParams) {
+nn::GeneralResult<Operand::ExtraParams> convert(const nn::Operand::ExtraParams& extraParams) {
     return std::visit([](const auto& x) { return makeExtraParams(x); }, extraParams);
 }
 
-nn::Result<Model> convert(const nn::Model& model) {
+nn::GeneralResult<Model> convert(const nn::Model& model) {
     if (!hal::utils::hasNoPointerData(model)) {
-        return NN_ERROR() << "Model cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Model cannot be converted because it contains pointer-based memory";
     }
 
     auto operands = NN_TRY(convert(model.main.operands));
@@ -443,7 +449,7 @@
     };
 }
 
-nn::Result<Model::ExtensionNameAndPrefix> convert(
+nn::GeneralResult<Model::ExtensionNameAndPrefix> convert(
         const nn::Model::ExtensionNameAndPrefix& extensionNameAndPrefix) {
     return Model::ExtensionNameAndPrefix{
             .name = extensionNameAndPrefix.name,
@@ -451,27 +457,27 @@
     };
 }
 
-nn::Result<OutputShape> convert(const nn::OutputShape& outputShape) {
+nn::GeneralResult<OutputShape> convert(const nn::OutputShape& outputShape) {
     return OutputShape{.dimensions = outputShape.dimensions,
                        .isSufficient = outputShape.isSufficient};
 }
 
-nn::Result<MeasureTiming> convert(const nn::MeasureTiming& measureTiming) {
+nn::GeneralResult<MeasureTiming> convert(const nn::MeasureTiming& measureTiming) {
     return static_cast<MeasureTiming>(measureTiming);
 }
 
-nn::Result<Timing> convert(const nn::Timing& timing) {
+nn::GeneralResult<Timing> convert(const nn::Timing& timing) {
     return Timing{.timeOnDevice = timing.timeOnDevice, .timeInDriver = timing.timeInDriver};
 }
 
-nn::Result<Extension> convert(const nn::Extension& extension) {
+nn::GeneralResult<Extension> convert(const nn::Extension& extension) {
     return Extension{
             .name = extension.name,
             .operandTypes = NN_TRY(convert(extension.operandTypes)),
     };
 }
 
-nn::Result<Extension::OperandTypeInformation> convert(
+nn::GeneralResult<Extension::OperandTypeInformation> convert(
         const nn::Extension::OperandTypeInformation& operandTypeInformation) {
     return Extension::OperandTypeInformation{
             .type = operandTypeInformation.type,
@@ -480,22 +486,19 @@
     };
 }
 
-nn::Result<hidl_handle> convert(const nn::NativeHandle& handle) {
-    const auto hidlHandle = hidl_handle(handle->handle());
-    // Copy memory to force the native_handle_t to be copied.
-    auto copiedHandle = hidlHandle;
-    return copiedHandle;
+nn::GeneralResult<hidl_handle> convert(const nn::SharedHandle& handle) {
+    return hal::utils::hidlHandleFromSharedHandle(handle);
 }
 
-nn::Result<hidl_vec<Extension>> convert(const std::vector<nn::Extension>& extensions) {
+nn::GeneralResult<hidl_vec<Extension>> convert(const std::vector<nn::Extension>& extensions) {
     return convertVec(extensions);
 }
 
-nn::Result<hidl_vec<hidl_handle>> convert(const std::vector<nn::NativeHandle>& handles) {
+nn::GeneralResult<hidl_vec<hidl_handle>> convert(const std::vector<nn::SharedHandle>& handles) {
     return convertVec(handles);
 }
 
-nn::Result<hidl_vec<OutputShape>> convert(const std::vector<nn::OutputShape>& outputShapes) {
+nn::GeneralResult<hidl_vec<OutputShape>> convert(const std::vector<nn::OutputShape>& outputShapes) {
     return convertVec(outputShapes);
 }
 
diff --git a/neuralnetworks/1.2/utils/src/Device.cpp b/neuralnetworks/1.2/utils/src/Device.cpp
new file mode 100644
index 0000000..a9e5377
--- /dev/null
+++ b/neuralnetworks/1.2/utils/src/Device.cpp
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Device.h"
+
+#include "Callbacks.h"
+#include "Conversions.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/types.h>
+#include <android/hardware/neuralnetworks/1.2/IDevice.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.1/Conversions.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+namespace {
+
+nn::GeneralResult<nn::Capabilities> initCapabilities(V1_2::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<nn::Capabilities> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                 << "uninitialized";
+    const auto cb = [&result](V1_0::ErrorStatus status, const Capabilities& capabilities) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "getCapabilities_1_2 failed with " << toString(status);
+        } else {
+            result = validatedConvertToCanonical(capabilities);
+        }
+    };
+
+    const auto ret = device->getCapabilities_1_2(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+}  // namespace
+
+nn::GeneralResult<std::string> initVersionString(V1_2::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<std::string> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                            << "uninitialized";
+    const auto cb = [&result](V1_0::ErrorStatus status, const hidl_string& versionString) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "getVersionString failed with " << toString(status);
+        } else {
+            result = versionString;
+        }
+    };
+
+    const auto ret = device->getVersionString(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<nn::DeviceType> initDeviceType(V1_2::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<nn::DeviceType> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                               << "uninitialized";
+    const auto cb = [&result](V1_0::ErrorStatus status, DeviceType deviceType) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "getDeviceType failed with " << toString(status);
+        } else {
+            result = nn::convert(deviceType);
+        }
+    };
+
+    const auto ret = device->getType(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<std::vector<nn::Extension>> initExtensions(V1_2::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<std::vector<nn::Extension>> result =
+            NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+    const auto cb = [&result](V1_0::ErrorStatus status, const hidl_vec<Extension>& extensions) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "getExtensions failed with " << toString(status);
+        } else {
+            result = nn::convert(extensions);
+        }
+    };
+
+    const auto ret = device->getSupportedExtensions(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<std::pair<uint32_t, uint32_t>> initNumberOfCacheFilesNeeded(
+        V1_2::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<std::pair<uint32_t, uint32_t>> result =
+            NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+    const auto cb = [&result](V1_0::ErrorStatus status, uint32_t numModelCache,
+                              uint32_t numDataCache) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical)
+                     << "getNumberOfCacheFilesNeeded failed with " << toString(status);
+        } else {
+            result = std::make_pair(numModelCache, numDataCache);
+        }
+    };
+
+    const auto ret = device->getNumberOfCacheFilesNeeded(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<std::shared_ptr<const Device>> Device::create(std::string name,
+                                                                sp<V1_2::IDevice> device) {
+    if (name.empty()) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_2::utils::Device::create must have non-empty name";
+    }
+    if (device == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_2::utils::Device::create must have non-null device";
+    }
+
+    auto versionString = NN_TRY(initVersionString(device.get()));
+    const auto deviceType = NN_TRY(initDeviceType(device.get()));
+    auto extensions = NN_TRY(initExtensions(device.get()));
+    auto capabilities = NN_TRY(initCapabilities(device.get()));
+    const auto numberOfCacheFilesNeeded = NN_TRY(initNumberOfCacheFilesNeeded(device.get()));
+
+    auto deathHandler = NN_TRY(hal::utils::DeathHandler::create(device));
+    return std::make_shared<const Device>(
+            PrivateConstructorTag{}, std::move(name), std::move(versionString), deviceType,
+            std::move(extensions), std::move(capabilities), numberOfCacheFilesNeeded,
+            std::move(device), std::move(deathHandler));
+}
+
+Device::Device(PrivateConstructorTag /*tag*/, std::string name, std::string versionString,
+               nn::DeviceType deviceType, std::vector<nn::Extension> extensions,
+               nn::Capabilities capabilities,
+               std::pair<uint32_t, uint32_t> numberOfCacheFilesNeeded, sp<V1_2::IDevice> device,
+               hal::utils::DeathHandler deathHandler)
+    : kName(std::move(name)),
+      kVersionString(std::move(versionString)),
+      kDeviceType(deviceType),
+      kExtensions(std::move(extensions)),
+      kCapabilities(std::move(capabilities)),
+      kNumberOfCacheFilesNeeded(numberOfCacheFilesNeeded),
+      kDevice(std::move(device)),
+      kDeathHandler(std::move(deathHandler)) {}
+
+const std::string& Device::getName() const {
+    return kName;
+}
+
+const std::string& Device::getVersionString() const {
+    return kVersionString;
+}
+
+nn::Version Device::getFeatureLevel() const {
+    return nn::Version::ANDROID_Q;
+}
+
+nn::DeviceType Device::getType() const {
+    return kDeviceType;
+}
+
+const std::vector<nn::Extension>& Device::getSupportedExtensions() const {
+    return kExtensions;
+}
+
+const nn::Capabilities& Device::getCapabilities() const {
+    return kCapabilities;
+}
+
+std::pair<uint32_t, uint32_t> Device::getNumberOfCacheFilesNeeded() const {
+    return kNumberOfCacheFilesNeeded;
+}
+
+nn::GeneralResult<void> Device::wait() const {
+    const auto ret = kDevice->ping();
+    return hal::utils::handleTransportError(ret);
+}
+
+nn::GeneralResult<std::vector<bool>> Device::getSupportedOperations(const nn::Model& model) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+
+    nn::GeneralResult<std::vector<bool>> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                  << "uninitialized";
+    auto cb = [&result, &model](V1_0::ErrorStatus status,
+                                const hidl_vec<bool>& supportedOperations) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical)
+                     << "getSupportedOperations_1_2 failed with " << toString(status);
+        } else if (supportedOperations.size() != model.main.operations.size()) {
+            result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                     << "getSupportedOperations_1_2 returned vector of size "
+                     << supportedOperations.size() << " but expected "
+                     << model.main.operations.size();
+        } else {
+            result = supportedOperations;
+        }
+    };
+
+    const auto ret = kDevice->getSupportedOperations_1_2(hidlModel, cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModel(
+        const nn::Model& model, nn::ExecutionPreference preference, nn::Priority /*priority*/,
+        nn::OptionalTimePoint /*deadline*/, const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+    const auto hidlPreference = NN_TRY(V1_1::utils::convert(preference));
+    const auto hidlModelCache = NN_TRY(convert(modelCache));
+    const auto hidlDataCache = NN_TRY(convert(dataCache));
+    const auto hidlToken = token;
+
+    const auto cb = sp<PreparedModelCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret = kDevice->prepareModel_1_2(hidlModel, hidlPreference, hidlModelCache,
+                                               hidlDataCache, hidlToken, cb);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "prepareModel_1_2 failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModelFromCache(
+        nn::OptionalTimePoint /*deadline*/, const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    const auto hidlModelCache = NN_TRY(convert(modelCache));
+    const auto hidlDataCache = NN_TRY(convert(dataCache));
+    const auto hidlToken = token;
+
+    const auto cb = sp<PreparedModelCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret = kDevice->prepareModelFromCache(hidlModelCache, hidlDataCache, hidlToken, cb);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "prepareModelFromCache failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::GeneralResult<nn::SharedBuffer> Device::allocate(
+        const nn::BufferDesc& /*desc*/,
+        const std::vector<nn::SharedPreparedModel>& /*preparedModels*/,
+        const std::vector<nn::BufferRole>& /*inputRoles*/,
+        const std::vector<nn::BufferRole>& /*outputRoles*/) const {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "IDevice::allocate not supported on 1.2 HAL service";
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
diff --git a/neuralnetworks/1.2/utils/src/PreparedModel.cpp b/neuralnetworks/1.2/utils/src/PreparedModel.cpp
new file mode 100644
index 0000000..ff9db21
--- /dev/null
+++ b/neuralnetworks/1.2/utils/src/PreparedModel.cpp
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PreparedModel.h"
+
+#include "Callbacks.h"
+#include "Conversions.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/types.h>
+#include <android/hardware/neuralnetworks/1.2/IPreparedModel.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Conversions.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <memory>
+#include <tuple>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+namespace {
+
+nn::GeneralResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+convertExecutionResultsHelper(const hidl_vec<OutputShape>& outputShapes, const Timing& timing) {
+    return std::make_pair(NN_TRY(validatedConvertToCanonical(outputShapes)),
+                          NN_TRY(validatedConvertToCanonical(timing)));
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> convertExecutionResults(
+        const hidl_vec<OutputShape>& outputShapes, const Timing& timing) {
+    return hal::utils::makeExecutionFailure(convertExecutionResultsHelper(outputShapes, timing));
+}
+
+}  // namespace
+
+nn::GeneralResult<std::shared_ptr<const PreparedModel>> PreparedModel::create(
+        sp<V1_2::IPreparedModel> preparedModel) {
+    if (preparedModel == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_2::utils::PreparedModel::create must have non-null preparedModel";
+    }
+
+    auto deathHandler = NN_TRY(hal::utils::DeathHandler::create(preparedModel));
+    return std::make_shared<const PreparedModel>(PrivateConstructorTag{}, std::move(preparedModel),
+                                                 std::move(deathHandler));
+}
+
+PreparedModel::PreparedModel(PrivateConstructorTag /*tag*/, sp<V1_2::IPreparedModel> preparedModel,
+                             hal::utils::DeathHandler deathHandler)
+    : kPreparedModel(std::move(preparedModel)), kDeathHandler(std::move(deathHandler)) {}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+PreparedModel::executeSynchronously(const V1_0::Request& request, MeasureTiming measure) const {
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> result =
+            NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+    const auto cb = [&result](V1_0::ErrorStatus status, const hidl_vec<OutputShape>& outputShapes,
+                              const Timing& timing) {
+        if (status != V1_0::ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "executeSynchronously failed with " << toString(status);
+        } else {
+            result = convertExecutionResults(outputShapes, timing);
+        }
+    };
+
+    const auto ret = kPreparedModel->executeSynchronously(request, measure, cb);
+    NN_TRY(hal::utils::makeExecutionFailure(hal::utils::handleTransportError(ret)));
+
+    return result;
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+PreparedModel::executeAsynchronously(const V1_0::Request& request, MeasureTiming measure) const {
+    const auto cb = sp<ExecutionCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret = kPreparedModel->execute_1_2(request, measure, cb);
+    const auto status =
+            NN_TRY(hal::utils::makeExecutionFailure(hal::utils::handleTransportError(ret)));
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "execute failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> PreparedModel::execute(
+        const nn::Request& request, nn::MeasureTiming measure,
+        const nn::OptionalTimePoint& /*deadline*/,
+        const nn::OptionalTimeoutDuration& /*loopTimeoutDuration*/) const {
+    // Ensure that request is ready for IPC.
+    std::optional<nn::Request> maybeRequestInShared;
+    const nn::Request& requestInShared = NN_TRY(hal::utils::makeExecutionFailure(
+            hal::utils::flushDataFromPointerToShared(&request, &maybeRequestInShared)));
+
+    const auto hidlRequest =
+            NN_TRY(hal::utils::makeExecutionFailure(V1_0::utils::convert(requestInShared)));
+    const auto hidlMeasure = NN_TRY(hal::utils::makeExecutionFailure(convert(measure)));
+
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> result =
+            NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+    const bool preferSynchronous = true;
+
+    // Execute synchronously if allowed.
+    if (preferSynchronous) {
+        result = executeSynchronously(hidlRequest, hidlMeasure);
+    }
+
+    // Run asymchronous execution if execution has not already completed.
+    if (!result.has_value()) {
+        result = executeAsynchronously(hidlRequest, hidlMeasure);
+    }
+
+    // Flush output buffers if suxcessful execution.
+    if (result.has_value()) {
+        NN_TRY(hal::utils::makeExecutionFailure(
+                hal::utils::unflushDataFromSharedToPointer(request, maybeRequestInShared)));
+    }
+
+    return result;
+}
+
+nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>>
+PreparedModel::executeFenced(
+        const nn::Request& /*request*/, const std::vector<nn::SyncFence>& /*waitFor*/,
+        nn::MeasureTiming /*measure*/, const nn::OptionalTimePoint& /*deadline*/,
+        const nn::OptionalTimeoutDuration& /*loopTimeoutDuration*/,
+        const nn::OptionalTimeoutDuration& /*timeoutDurationAfterFence*/) const {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "IPreparedModel::executeFenced is not supported on 1.2 HAL service";
+}
+
+std::any PreparedModel::getUnderlyingResource() const {
+    sp<V1_0::IPreparedModel> resource = kPreparedModel;
+    return resource;
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
diff --git a/neuralnetworks/1.2/utils/src/Service.cpp b/neuralnetworks/1.2/utils/src/Service.cpp
new file mode 100644
index 0000000..110188f
--- /dev/null
+++ b/neuralnetworks/1.2/utils/src/Service.cpp
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Service.h"
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/ResilientDevice.h>
+#include <string>
+#include "Device.h"
+
+namespace android::hardware::neuralnetworks::V1_2::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name) {
+    hal::utils::ResilientDevice::Factory makeDevice =
+            [name](bool blocking) -> nn::GeneralResult<nn::SharedDevice> {
+        auto service = blocking ? IDevice::getService(name) : IDevice::tryGetService(name);
+        if (service == nullptr) {
+            return NN_ERROR() << (blocking ? "getService" : "tryGetService") << " returned nullptr";
+        }
+        return Device::create(name, std::move(service));
+    };
+
+    return hal::utils::ResilientDevice::create(std::move(makeDevice));
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_2::utils
diff --git a/neuralnetworks/1.3/utils/Android.bp b/neuralnetworks/1.3/utils/Android.bp
index 279b250..d5d897d 100644
--- a/neuralnetworks/1.3/utils/Android.bp
+++ b/neuralnetworks/1.3/utils/Android.bp
@@ -20,6 +20,7 @@
     srcs: ["src/*"],
     local_include_dirs: ["include/nnapi/hal/1.3/"],
     export_include_dirs: ["include"],
+    cflags: ["-Wthread-safety"],
     static_libs: [
         "neuralnetworks_types",
         "neuralnetworks_utils_hal_common",
diff --git a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Buffer.h b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Buffer.h
new file mode 100644
index 0000000..637179d
--- /dev/null
+++ b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Buffer.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_BUFFER_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_BUFFER_H
+
+#include <android/hardware/neuralnetworks/1.3/IBuffer.h>
+#include <android/hardware/neuralnetworks/1.3/types.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <memory>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+
+class Buffer final : public nn::IBuffer {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const Buffer>> create(
+            sp<V1_3::IBuffer> buffer, nn::Request::MemoryDomainToken token);
+
+    Buffer(PrivateConstructorTag tag, sp<V1_3::IBuffer> buffer,
+           nn::Request::MemoryDomainToken token);
+
+    nn::Request::MemoryDomainToken getToken() const override;
+
+    nn::GeneralResult<void> copyTo(const nn::Memory& dst) const override;
+    nn::GeneralResult<void> copyFrom(const nn::Memory& src,
+                                     const nn::Dimensions& dimensions) const override;
+
+  private:
+    const sp<V1_3::IBuffer> kBuffer;
+    const nn::Request::MemoryDomainToken kToken;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_BUFFER_H
diff --git a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Callbacks.h b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Callbacks.h
new file mode 100644
index 0000000..d46b111
--- /dev/null
+++ b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Callbacks.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_CALLBACKS_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_CALLBACKS_H
+
+#include <android/hardware/neuralnetworks/1.0/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.0/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.2/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.2/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <android/hardware/neuralnetworks/1.3/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.3/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.3/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Callbacks.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+#include <nnapi/hal/TransferValue.h>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+
+class PreparedModelCallback final : public IPreparedModelCallback,
+                                    public hal::utils::IProtectedCallback {
+  public:
+    using Data = nn::GeneralResult<nn::SharedPreparedModel>;
+
+    Return<void> notify(V1_0::ErrorStatus status,
+                        const sp<V1_0::IPreparedModel>& preparedModel) override;
+    Return<void> notify_1_2(V1_0::ErrorStatus status,
+                            const sp<V1_2::IPreparedModel>& preparedModel) override;
+    Return<void> notify_1_3(ErrorStatus status, const sp<IPreparedModel>& preparedModel) override;
+
+    void notifyAsDeadObject() override;
+
+    Data get();
+
+  private:
+    void notifyInternal(Data result);
+
+    hal::utils::TransferValue<Data> mData;
+};
+
+class ExecutionCallback final : public IExecutionCallback, public hal::utils::IProtectedCallback {
+  public:
+    using Data = nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>;
+
+    Return<void> notify(V1_0::ErrorStatus status) override;
+    Return<void> notify_1_2(V1_0::ErrorStatus status,
+                            const hidl_vec<V1_2::OutputShape>& outputShapes,
+                            const V1_2::Timing& timing) override;
+    Return<void> notify_1_3(ErrorStatus status, const hidl_vec<V1_2::OutputShape>& outputShapes,
+                            const V1_2::Timing& timing) override;
+
+    void notifyAsDeadObject() override;
+
+    Data get();
+
+  private:
+    void notifyInternal(Data result);
+
+    hal::utils::TransferValue<Data> mData;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_CALLBACKS_H
diff --git a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Conversions.h b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Conversions.h
index 43987a9..64aa96e 100644
--- a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Conversions.h
+++ b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Conversions.h
@@ -25,54 +25,54 @@
 
 namespace android::nn {
 
-Result<OperandType> convert(const hal::V1_3::OperandType& operandType);
-Result<OperationType> convert(const hal::V1_3::OperationType& operationType);
-Result<Priority> convert(const hal::V1_3::Priority& priority);
-Result<Capabilities> convert(const hal::V1_3::Capabilities& capabilities);
-Result<Capabilities::OperandPerformance> convert(
+GeneralResult<OperandType> convert(const hal::V1_3::OperandType& operandType);
+GeneralResult<OperationType> convert(const hal::V1_3::OperationType& operationType);
+GeneralResult<Priority> convert(const hal::V1_3::Priority& priority);
+GeneralResult<Capabilities> convert(const hal::V1_3::Capabilities& capabilities);
+GeneralResult<Capabilities::OperandPerformance> convert(
         const hal::V1_3::Capabilities::OperandPerformance& operandPerformance);
-Result<Operation> convert(const hal::V1_3::Operation& operation);
-Result<Operand::LifeTime> convert(const hal::V1_3::OperandLifeTime& operandLifeTime);
-Result<Operand> convert(const hal::V1_3::Operand& operand);
-Result<Model> convert(const hal::V1_3::Model& model);
-Result<Model::Subgraph> convert(const hal::V1_3::Subgraph& subgraph);
-Result<BufferDesc> convert(const hal::V1_3::BufferDesc& bufferDesc);
-Result<BufferRole> convert(const hal::V1_3::BufferRole& bufferRole);
-Result<Request> convert(const hal::V1_3::Request& request);
-Result<Request::MemoryPool> convert(const hal::V1_3::Request::MemoryPool& memoryPool);
-Result<OptionalTimePoint> convert(const hal::V1_3::OptionalTimePoint& optionalTimePoint);
-Result<OptionalTimeoutDuration> convert(
+GeneralResult<Operation> convert(const hal::V1_3::Operation& operation);
+GeneralResult<Operand::LifeTime> convert(const hal::V1_3::OperandLifeTime& operandLifeTime);
+GeneralResult<Operand> convert(const hal::V1_3::Operand& operand);
+GeneralResult<Model> convert(const hal::V1_3::Model& model);
+GeneralResult<Model::Subgraph> convert(const hal::V1_3::Subgraph& subgraph);
+GeneralResult<BufferDesc> convert(const hal::V1_3::BufferDesc& bufferDesc);
+GeneralResult<BufferRole> convert(const hal::V1_3::BufferRole& bufferRole);
+GeneralResult<Request> convert(const hal::V1_3::Request& request);
+GeneralResult<Request::MemoryPool> convert(const hal::V1_3::Request::MemoryPool& memoryPool);
+GeneralResult<OptionalTimePoint> convert(const hal::V1_3::OptionalTimePoint& optionalTimePoint);
+GeneralResult<OptionalTimeoutDuration> convert(
         const hal::V1_3::OptionalTimeoutDuration& optionalTimeoutDuration);
-Result<ErrorStatus> convert(const hal::V1_3::ErrorStatus& errorStatus);
+GeneralResult<ErrorStatus> convert(const hal::V1_3::ErrorStatus& errorStatus);
 
-Result<std::vector<BufferRole>> convert(
+GeneralResult<std::vector<BufferRole>> convert(
         const hardware::hidl_vec<hal::V1_3::BufferRole>& bufferRoles);
 
 }  // namespace android::nn
 
 namespace android::hardware::neuralnetworks::V1_3::utils {
 
-nn::Result<OperandType> convert(const nn::OperandType& operandType);
-nn::Result<OperationType> convert(const nn::OperationType& operationType);
-nn::Result<Priority> convert(const nn::Priority& priority);
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities);
-nn::Result<Capabilities::OperandPerformance> convert(
+nn::GeneralResult<OperandType> convert(const nn::OperandType& operandType);
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType);
+nn::GeneralResult<Priority> convert(const nn::Priority& priority);
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities);
+nn::GeneralResult<Capabilities::OperandPerformance> convert(
         const nn::Capabilities::OperandPerformance& operandPerformance);
-nn::Result<Operation> convert(const nn::Operation& operation);
-nn::Result<OperandLifeTime> convert(const nn::Operand::LifeTime& operandLifeTime);
-nn::Result<Operand> convert(const nn::Operand& operand);
-nn::Result<Model> convert(const nn::Model& model);
-nn::Result<Subgraph> convert(const nn::Model::Subgraph& subgraph);
-nn::Result<BufferDesc> convert(const nn::BufferDesc& bufferDesc);
-nn::Result<BufferRole> convert(const nn::BufferRole& bufferRole);
-nn::Result<Request> convert(const nn::Request& request);
-nn::Result<Request::MemoryPool> convert(const nn::Request::MemoryPool& memoryPool);
-nn::Result<OptionalTimePoint> convert(const nn::OptionalTimePoint& optionalTimePoint);
-nn::Result<OptionalTimeoutDuration> convert(
+nn::GeneralResult<Operation> convert(const nn::Operation& operation);
+nn::GeneralResult<OperandLifeTime> convert(const nn::Operand::LifeTime& operandLifeTime);
+nn::GeneralResult<Operand> convert(const nn::Operand& operand);
+nn::GeneralResult<Model> convert(const nn::Model& model);
+nn::GeneralResult<Subgraph> convert(const nn::Model::Subgraph& subgraph);
+nn::GeneralResult<BufferDesc> convert(const nn::BufferDesc& bufferDesc);
+nn::GeneralResult<BufferRole> convert(const nn::BufferRole& bufferRole);
+nn::GeneralResult<Request> convert(const nn::Request& request);
+nn::GeneralResult<Request::MemoryPool> convert(const nn::Request::MemoryPool& memoryPool);
+nn::GeneralResult<OptionalTimePoint> convert(const nn::OptionalTimePoint& optionalTimePoint);
+nn::GeneralResult<OptionalTimeoutDuration> convert(
         const nn::OptionalTimeoutDuration& optionalTimeoutDuration);
-nn::Result<ErrorStatus> convert(const nn::ErrorStatus& errorStatus);
+nn::GeneralResult<ErrorStatus> convert(const nn::ErrorStatus& errorStatus);
 
-nn::Result<hidl_vec<BufferRole>> convert(const std::vector<nn::BufferRole>& bufferRoles);
+nn::GeneralResult<hidl_vec<BufferRole>> convert(const std::vector<nn::BufferRole>& bufferRoles);
 
 }  // namespace android::hardware::neuralnetworks::V1_3::utils
 
diff --git a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Device.h b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Device.h
new file mode 100644
index 0000000..0f5234b
--- /dev/null
+++ b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Device.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_DEVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_DEVICE_H
+
+#include <android/hardware/neuralnetworks/1.3/IDevice.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+
+class Device final : public nn::IDevice {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const Device>> create(std::string name,
+                                                                   sp<V1_3::IDevice> device);
+
+    Device(PrivateConstructorTag tag, std::string name, std::string versionString,
+           nn::DeviceType deviceType, std::vector<nn::Extension> extensions,
+           nn::Capabilities capabilities, std::pair<uint32_t, uint32_t> numberOfCacheFilesNeeded,
+           sp<V1_3::IDevice> device, hal::utils::DeathHandler deathHandler);
+
+    const std::string& getName() const override;
+    const std::string& getVersionString() const override;
+    nn::Version getFeatureLevel() const override;
+    nn::DeviceType getType() const override;
+    const std::vector<nn::Extension>& getSupportedExtensions() const override;
+    const nn::Capabilities& getCapabilities() const override;
+    std::pair<uint32_t, uint32_t> getNumberOfCacheFilesNeeded() const override;
+
+    nn::GeneralResult<void> wait() const override;
+
+    nn::GeneralResult<std::vector<bool>> getSupportedOperations(
+            const nn::Model& model) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModel(
+            const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelFromCache(
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedBuffer> allocate(
+            const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+            const std::vector<nn::BufferRole>& inputRoles,
+            const std::vector<nn::BufferRole>& outputRoles) const override;
+
+  private:
+    const std::string kName;
+    const std::string kVersionString;
+    const nn::DeviceType kDeviceType;
+    const std::vector<nn::Extension> kExtensions;
+    const nn::Capabilities kCapabilities;
+    const std::pair<uint32_t, uint32_t> kNumberOfCacheFilesNeeded;
+    const sp<V1_3::IDevice> kDevice;
+    const hal::utils::DeathHandler kDeathHandler;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_DEVICE_H
diff --git a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/PreparedModel.h b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/PreparedModel.h
new file mode 100644
index 0000000..e0d69dd
--- /dev/null
+++ b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/PreparedModel.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_PREPARED_MODEL_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_PREPARED_MODEL_H
+
+#include <android/hardware/neuralnetworks/1.3/IPreparedModel.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <memory>
+#include <tuple>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+
+class PreparedModel final : public nn::IPreparedModel {
+    struct PrivateConstructorTag {};
+
+  public:
+    static nn::GeneralResult<std::shared_ptr<const PreparedModel>> create(
+            sp<V1_3::IPreparedModel> preparedModel);
+
+    PreparedModel(PrivateConstructorTag tag, sp<V1_3::IPreparedModel> preparedModel,
+                  hal::utils::DeathHandler deathHandler);
+
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> execute(
+            const nn::Request& request, nn::MeasureTiming measure,
+            const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration) const override;
+
+    nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>> executeFenced(
+            const nn::Request& request, const std::vector<nn::SyncFence>& waitFor,
+            nn::MeasureTiming measure, const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration,
+            const nn::OptionalTimeoutDuration& timeoutDurationAfterFence) const override;
+
+    std::any getUnderlyingResource() const override;
+
+  private:
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> executeSynchronously(
+            const Request& request, V1_2::MeasureTiming measure, const OptionalTimePoint& deadline,
+            const OptionalTimeoutDuration& loopTimeoutDuration) const;
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> executeAsynchronously(
+            const Request& request, V1_2::MeasureTiming measure, const OptionalTimePoint& deadline,
+            const OptionalTimeoutDuration& loopTimeoutDuration) const;
+
+    const sp<V1_3::IPreparedModel> kPreparedModel;
+    const hal::utils::DeathHandler kDeathHandler;
+};
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_PREPARED_MODEL_H
diff --git a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Service.h b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Service.h
new file mode 100644
index 0000000..2bc3257
--- /dev/null
+++ b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Service.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_SERVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_SERVICE_H
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <string>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name);
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_1_3_UTILS_SERVICE_H
diff --git a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Utils.h b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Utils.h
index f8c975d..e61859d 100644
--- a/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Utils.h
+++ b/neuralnetworks/1.3/utils/include/nnapi/hal/1.3/Utils.h
@@ -22,6 +22,7 @@
 #include <android-base/logging.h>
 #include <android/hardware/neuralnetworks/1.3/types.h>
 #include <nnapi/Result.h>
+#include <nnapi/TypeUtils.h>
 #include <nnapi/Types.h>
 #include <nnapi/Validation.h>
 #include <nnapi/hal/1.0/Conversions.h>
@@ -35,10 +36,14 @@
 
 template <typename Type>
 nn::Result<void> validate(const Type& halObject) {
-    const auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeCanonical = nn::convert(halObject);
+    if (!maybeCanonical.has_value()) {
+        return nn::error() << maybeCanonical.error().message;
+    }
+    const auto version = NN_TRY(nn::validate(maybeCanonical.value()));
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return {};
 }
@@ -55,9 +60,14 @@
 template <typename Type>
 decltype(nn::convert(std::declval<Type>())) validatedConvertToCanonical(const Type& halObject) {
     auto canonical = NN_TRY(nn::convert(halObject));
-    const auto version = NN_TRY(nn::validate(canonical));
+    const auto maybeVersion = nn::validate(canonical);
+    if (!maybeVersion.has_value()) {
+        return nn::error() << maybeVersion.error();
+    }
+    const auto version = maybeVersion.value();
     if (version > utils::kVersion) {
-        return NN_ERROR() << "";
+        return NN_ERROR() << "Insufficient version: " << version << " vs required "
+                          << utils::kVersion;
     }
     return canonical;
 }
diff --git a/neuralnetworks/1.3/utils/src/Buffer.cpp b/neuralnetworks/1.3/utils/src/Buffer.cpp
new file mode 100644
index 0000000..f3fe9b5
--- /dev/null
+++ b/neuralnetworks/1.3/utils/src/Buffer.cpp
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Buffer.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/types.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <android/hardware/neuralnetworks/1.3/IBuffer.h>
+#include <android/hardware/neuralnetworks/1.3/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Conversions.h>
+#include <nnapi/hal/HandleError.h>
+
+#include "Conversions.h"
+#include "Utils.h"
+
+#include <memory>
+#include <utility>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+
+nn::GeneralResult<std::shared_ptr<const Buffer>> Buffer::create(
+        sp<V1_3::IBuffer> buffer, nn::Request::MemoryDomainToken token) {
+    if (buffer == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_3::utils::Buffer::create must have non-null buffer";
+    }
+    if (token == static_cast<nn::Request::MemoryDomainToken>(0)) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_3::utils::Buffer::create must have non-zero token";
+    }
+
+    return std::make_shared<const Buffer>(PrivateConstructorTag{}, std::move(buffer), token);
+}
+
+Buffer::Buffer(PrivateConstructorTag /*tag*/, sp<V1_3::IBuffer> buffer,
+               nn::Request::MemoryDomainToken token)
+    : kBuffer(std::move(buffer)), kToken(token) {
+    CHECK(kBuffer != nullptr);
+    CHECK(kToken != static_cast<nn::Request::MemoryDomainToken>(0));
+}
+
+nn::Request::MemoryDomainToken Buffer::getToken() const {
+    return kToken;
+}
+
+nn::GeneralResult<void> Buffer::copyTo(const nn::Memory& dst) const {
+    const auto hidlDst = NN_TRY(V1_0::utils::convert(dst));
+
+    const auto ret = kBuffer->copyTo(hidlDst);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "IBuffer::copyTo failed with " << toString(status);
+    }
+
+    return {};
+}
+
+nn::GeneralResult<void> Buffer::copyFrom(const nn::Memory& src,
+                                         const nn::Dimensions& dimensions) const {
+    const auto hidlSrc = NN_TRY(V1_0::utils::convert(src));
+    const auto hidlDimensions = hidl_vec<uint32_t>(dimensions);
+
+    const auto ret = kBuffer->copyFrom(hidlSrc, hidlDimensions);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "IBuffer::copyFrom failed with " << toString(status);
+    }
+
+    return {};
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
diff --git a/neuralnetworks/1.3/utils/src/Callbacks.cpp b/neuralnetworks/1.3/utils/src/Callbacks.cpp
new file mode 100644
index 0000000..ff81275
--- /dev/null
+++ b/neuralnetworks/1.3/utils/src/Callbacks.cpp
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Callbacks.h"
+
+#include "Conversions.h"
+#include "PreparedModel.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <android/hardware/neuralnetworks/1.3/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.3/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.3/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Conversions.h>
+#include <nnapi/hal/1.0/PreparedModel.h>
+#include <nnapi/hal/1.2/Conversions.h>
+#include <nnapi/hal/1.2/PreparedModel.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+#include <nnapi/hal/TransferValue.h>
+
+#include <utility>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+namespace {
+
+nn::GeneralResult<nn::SharedPreparedModel> convertPreparedModel(
+        const sp<V1_0::IPreparedModel>& preparedModel) {
+    return NN_TRY(V1_0::utils::PreparedModel::create(preparedModel));
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> convertPreparedModel(
+        const sp<V1_2::IPreparedModel>& preparedModel) {
+    return NN_TRY(V1_2::utils::PreparedModel::create(preparedModel));
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> convertPreparedModel(
+        const sp<IPreparedModel>& preparedModel) {
+    return NN_TRY(utils::PreparedModel::create(preparedModel));
+}
+
+nn::GeneralResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+convertExecutionGeneralResultsHelper(const hidl_vec<V1_2::OutputShape>& outputShapes,
+                                     const V1_2::Timing& timing) {
+    return std::make_pair(NN_TRY(validatedConvertToCanonical(outputShapes)),
+                          NN_TRY(validatedConvertToCanonical(timing)));
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+convertExecutionGeneralResults(const hidl_vec<V1_2::OutputShape>& outputShapes,
+                               const V1_2::Timing& timing) {
+    return hal::utils::makeExecutionFailure(
+            convertExecutionGeneralResultsHelper(outputShapes, timing));
+}
+
+}  // namespace
+
+Return<void> PreparedModelCallback::notify(V1_0::ErrorStatus status,
+                                           const sp<V1_0::IPreparedModel>& preparedModel) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "preparedModel failed with " << toString(status));
+    } else if (preparedModel == nullptr) {
+        notifyInternal(NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                       << "Returned preparedModel is nullptr");
+    } else {
+        notifyInternal(convertPreparedModel(preparedModel));
+    }
+    return Void();
+}
+
+Return<void> PreparedModelCallback::notify_1_2(V1_0::ErrorStatus status,
+                                               const sp<V1_2::IPreparedModel>& preparedModel) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "preparedModel failed with " << toString(status));
+    } else if (preparedModel == nullptr) {
+        notifyInternal(NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                       << "Returned preparedModel is nullptr");
+    } else {
+        notifyInternal(convertPreparedModel(preparedModel));
+    }
+    return Void();
+}
+
+Return<void> PreparedModelCallback::notify_1_3(ErrorStatus status,
+                                               const sp<IPreparedModel>& preparedModel) {
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "preparedModel failed with " << toString(status));
+    } else if (preparedModel == nullptr) {
+        notifyInternal(NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                       << "Returned preparedModel is nullptr");
+    } else {
+        notifyInternal(convertPreparedModel(preparedModel));
+    }
+    return Void();
+}
+
+void PreparedModelCallback::notifyAsDeadObject() {
+    notifyInternal(NN_ERROR(nn::ErrorStatus::DEAD_OBJECT) << "Dead object");
+}
+
+PreparedModelCallback::Data PreparedModelCallback::get() {
+    return mData.take();
+}
+
+void PreparedModelCallback::notifyInternal(PreparedModelCallback::Data result) {
+    mData.put(std::move(result));
+}
+
+// ExecutionCallback methods begin here
+
+Return<void> ExecutionCallback::notify(V1_0::ErrorStatus status) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "execute failed with " << toString(status));
+    } else {
+        notifyInternal({});
+    }
+    return Void();
+}
+
+Return<void> ExecutionCallback::notify_1_2(V1_0::ErrorStatus status,
+                                           const hidl_vec<V1_2::OutputShape>& outputShapes,
+                                           const V1_2::Timing& timing) {
+    if (status != V1_0::ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "execute failed with " << toString(status));
+    } else {
+        notifyInternal(convertExecutionGeneralResults(outputShapes, timing));
+    }
+    return Void();
+}
+
+Return<void> ExecutionCallback::notify_1_3(ErrorStatus status,
+                                           const hidl_vec<V1_2::OutputShape>& outputShapes,
+                                           const V1_2::Timing& timing) {
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        notifyInternal(NN_ERROR(canonical) << "execute failed with " << toString(status));
+    } else {
+        notifyInternal(convertExecutionGeneralResults(outputShapes, timing));
+    }
+    return Void();
+}
+
+void ExecutionCallback::notifyAsDeadObject() {
+    notifyInternal(NN_ERROR(nn::ErrorStatus::DEAD_OBJECT) << "Dead object");
+}
+
+ExecutionCallback::Data ExecutionCallback::get() {
+    return mData.take();
+}
+
+void ExecutionCallback::notifyInternal(ExecutionCallback::Data result) {
+    mData.put(std::move(result));
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
diff --git a/neuralnetworks/1.3/utils/src/Conversions.cpp b/neuralnetworks/1.3/utils/src/Conversions.cpp
index 4c54e3b..0dc0785 100644
--- a/neuralnetworks/1.3/utils/src/Conversions.cpp
+++ b/neuralnetworks/1.3/utils/src/Conversions.cpp
@@ -27,6 +27,7 @@
 #include <nnapi/hal/1.0/Conversions.h>
 #include <nnapi/hal/1.2/Conversions.h>
 #include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
 
 #include <algorithm>
 #include <chrono>
@@ -79,7 +80,7 @@
 using ConvertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-Result<std::vector<ConvertOutput<Type>>> convertVec(const hidl_vec<Type>& arguments) {
+GeneralResult<std::vector<ConvertOutput<Type>>> convertVec(const hidl_vec<Type>& arguments) {
     std::vector<ConvertOutput<Type>> canonical;
     canonical.reserve(arguments.size());
     for (const auto& argument : arguments) {
@@ -89,25 +90,25 @@
 }
 
 template <typename Type>
-Result<std::vector<ConvertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
+GeneralResult<std::vector<ConvertOutput<Type>>> convert(const hidl_vec<Type>& arguments) {
     return convertVec(arguments);
 }
 
 }  // anonymous namespace
 
-Result<OperandType> convert(const hal::V1_3::OperandType& operandType) {
+GeneralResult<OperandType> convert(const hal::V1_3::OperandType& operandType) {
     return static_cast<OperandType>(operandType);
 }
 
-Result<OperationType> convert(const hal::V1_3::OperationType& operationType) {
+GeneralResult<OperationType> convert(const hal::V1_3::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-Result<Priority> convert(const hal::V1_3::Priority& priority) {
+GeneralResult<Priority> convert(const hal::V1_3::Priority& priority) {
     return static_cast<Priority>(priority);
 }
 
-Result<Capabilities> convert(const hal::V1_3::Capabilities& capabilities) {
+GeneralResult<Capabilities> convert(const hal::V1_3::Capabilities& capabilities) {
     const bool validOperandTypes = std::all_of(
             capabilities.operandPerformance.begin(), capabilities.operandPerformance.end(),
             [](const hal::V1_3::Capabilities::OperandPerformance& operandPerformance) {
@@ -115,13 +116,14 @@
                 return !maybeType.has_value() ? false : validOperandType(maybeType.value());
             });
     if (!validOperandTypes) {
-        return NN_ERROR()
+        return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
                << "Invalid OperandType when converting OperandPerformance in Capabilities";
     }
 
     auto operandPerformance = NN_TRY(convert(capabilities.operandPerformance));
-    auto table =
-            NN_TRY(Capabilities::OperandPerformanceTable::create(std::move(operandPerformance)));
+    auto table = NN_TRY(hal::utils::makeGeneralFailure(
+            Capabilities::OperandPerformanceTable::create(std::move(operandPerformance)),
+            nn::ErrorStatus::GENERAL_FAILURE));
 
     return Capabilities{
             .relaxedFloat32toFloat16PerformanceScalar =
@@ -134,7 +136,7 @@
     };
 }
 
-Result<Capabilities::OperandPerformance> convert(
+GeneralResult<Capabilities::OperandPerformance> convert(
         const hal::V1_3::Capabilities::OperandPerformance& operandPerformance) {
     return Capabilities::OperandPerformance{
             .type = NN_TRY(convert(operandPerformance.type)),
@@ -142,7 +144,7 @@
     };
 }
 
-Result<Operation> convert(const hal::V1_3::Operation& operation) {
+GeneralResult<Operation> convert(const hal::V1_3::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -150,11 +152,11 @@
     };
 }
 
-Result<Operand::LifeTime> convert(const hal::V1_3::OperandLifeTime& operandLifeTime) {
+GeneralResult<Operand::LifeTime> convert(const hal::V1_3::OperandLifeTime& operandLifeTime) {
     return static_cast<Operand::LifeTime>(operandLifeTime);
 }
 
-Result<Operand> convert(const hal::V1_3::Operand& operand) {
+GeneralResult<Operand> convert(const hal::V1_3::Operand& operand) {
     return Operand{
             .type = NN_TRY(convert(operand.type)),
             .dimensions = operand.dimensions,
@@ -166,7 +168,7 @@
     };
 }
 
-Result<Model> convert(const hal::V1_3::Model& model) {
+GeneralResult<Model> convert(const hal::V1_3::Model& model) {
     return Model{
             .main = NN_TRY(convert(model.main)),
             .referenced = NN_TRY(convert(model.referenced)),
@@ -177,7 +179,7 @@
     };
 }
 
-Result<Model::Subgraph> convert(const hal::V1_3::Subgraph& subgraph) {
+GeneralResult<Model::Subgraph> convert(const hal::V1_3::Subgraph& subgraph) {
     auto operations = NN_TRY(convert(subgraph.operations));
 
     // Verify number of consumers.
@@ -186,9 +188,10 @@
     CHECK(subgraph.operands.size() == numberOfConsumers.size());
     for (size_t i = 0; i < subgraph.operands.size(); ++i) {
         if (subgraph.operands[i].numberOfConsumers != numberOfConsumers[i]) {
-            return NN_ERROR() << "Invalid numberOfConsumers for operand " << i << ", expected "
-                              << numberOfConsumers[i] << " but found "
-                              << subgraph.operands[i].numberOfConsumers;
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                   << "Invalid numberOfConsumers for operand " << i << ", expected "
+                   << numberOfConsumers[i] << " but found "
+                   << subgraph.operands[i].numberOfConsumers;
         }
     }
 
@@ -200,11 +203,11 @@
     };
 }
 
-Result<BufferDesc> convert(const hal::V1_3::BufferDesc& bufferDesc) {
+GeneralResult<BufferDesc> convert(const hal::V1_3::BufferDesc& bufferDesc) {
     return BufferDesc{.dimensions = bufferDesc.dimensions};
 }
 
-Result<BufferRole> convert(const hal::V1_3::BufferRole& bufferRole) {
+GeneralResult<BufferRole> convert(const hal::V1_3::BufferRole& bufferRole) {
     return BufferRole{
             .modelIndex = bufferRole.modelIndex,
             .ioIndex = bufferRole.ioIndex,
@@ -212,7 +215,7 @@
     };
 }
 
-Result<Request> convert(const hal::V1_3::Request& request) {
+GeneralResult<Request> convert(const hal::V1_3::Request& request) {
     return Request{
             .inputs = NN_TRY(convert(request.inputs)),
             .outputs = NN_TRY(convert(request.outputs)),
@@ -220,7 +223,7 @@
     };
 }
 
-Result<Request::MemoryPool> convert(const hal::V1_3::Request::MemoryPool& memoryPool) {
+GeneralResult<Request::MemoryPool> convert(const hal::V1_3::Request::MemoryPool& memoryPool) {
     using Discriminator = hal::V1_3::Request::MemoryPool::hidl_discriminator;
     switch (memoryPool.getDiscriminator()) {
         case Discriminator::hidlMemory:
@@ -228,15 +231,16 @@
         case Discriminator::token:
             return static_cast<Request::MemoryDomainToken>(memoryPool.token());
     }
-    return NN_ERROR() << "Invalid Request::MemoryPool discriminator "
-                      << underlyingType(memoryPool.getDiscriminator());
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "Invalid Request::MemoryPool discriminator "
+           << underlyingType(memoryPool.getDiscriminator());
 }
 
-Result<OptionalTimePoint> convert(const hal::V1_3::OptionalTimePoint& optionalTimePoint) {
+GeneralResult<OptionalTimePoint> convert(const hal::V1_3::OptionalTimePoint& optionalTimePoint) {
     constexpr auto kTimePointMaxCount = TimePoint::max().time_since_epoch().count();
-    const auto makeTimePoint = [](uint64_t count) -> Result<OptionalTimePoint> {
+    const auto makeTimePoint = [](uint64_t count) -> GeneralResult<OptionalTimePoint> {
         if (count > kTimePointMaxCount) {
-            return NN_ERROR()
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
                    << "Unable to convert OptionalTimePoint because the count exceeds the max";
         }
         const auto nanoseconds = std::chrono::nanoseconds{count};
@@ -250,16 +254,17 @@
         case Discriminator::nanosecondsSinceEpoch:
             return makeTimePoint(optionalTimePoint.nanosecondsSinceEpoch());
     }
-    return NN_ERROR() << "Invalid OptionalTimePoint discriminator "
-                      << underlyingType(optionalTimePoint.getDiscriminator());
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "Invalid OptionalTimePoint discriminator "
+           << underlyingType(optionalTimePoint.getDiscriminator());
 }
 
-Result<OptionalTimeoutDuration> convert(
+GeneralResult<OptionalTimeoutDuration> convert(
         const hal::V1_3::OptionalTimeoutDuration& optionalTimeoutDuration) {
     constexpr auto kTimeoutDurationMaxCount = TimeoutDuration::max().count();
-    const auto makeTimeoutDuration = [](uint64_t count) -> Result<OptionalTimeoutDuration> {
+    const auto makeTimeoutDuration = [](uint64_t count) -> GeneralResult<OptionalTimeoutDuration> {
         if (count > kTimeoutDurationMaxCount) {
-            return NN_ERROR()
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
                    << "Unable to convert OptionalTimeoutDuration because the count exceeds the max";
         }
         return TimeoutDuration{count};
@@ -272,11 +277,12 @@
         case Discriminator::nanoseconds:
             return makeTimeoutDuration(optionalTimeoutDuration.nanoseconds());
     }
-    return NN_ERROR() << "Invalid OptionalTimeoutDuration discriminator "
-                      << underlyingType(optionalTimeoutDuration.getDiscriminator());
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "Invalid OptionalTimeoutDuration discriminator "
+           << underlyingType(optionalTimeoutDuration.getDiscriminator());
 }
 
-Result<ErrorStatus> convert(const hal::V1_3::ErrorStatus& status) {
+GeneralResult<ErrorStatus> convert(const hal::V1_3::ErrorStatus& status) {
     switch (status) {
         case hal::V1_3::ErrorStatus::NONE:
         case hal::V1_3::ErrorStatus::DEVICE_UNAVAILABLE:
@@ -289,10 +295,11 @@
         case hal::V1_3::ErrorStatus::RESOURCE_EXHAUSTED_PERSISTENT:
             return static_cast<ErrorStatus>(status);
     }
-    return NN_ERROR() << "Invalid ErrorStatus " << underlyingType(status);
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+           << "Invalid ErrorStatus " << underlyingType(status);
 }
 
-Result<std::vector<BufferRole>> convert(
+GeneralResult<std::vector<BufferRole>> convert(
         const hardware::hidl_vec<hal::V1_3::BufferRole>& bufferRoles) {
     return convertVec(bufferRoles);
 }
@@ -304,32 +311,32 @@
 
 using utils::convert;
 
-nn::Result<V1_0::PerformanceInfo> convert(
+nn::GeneralResult<V1_0::PerformanceInfo> convert(
         const nn::Capabilities::PerformanceInfo& performanceInfo) {
     return V1_0::utils::convert(performanceInfo);
 }
 
-nn::Result<V1_0::DataLocation> convert(const nn::DataLocation& dataLocation) {
+nn::GeneralResult<V1_0::DataLocation> convert(const nn::DataLocation& dataLocation) {
     return V1_0::utils::convert(dataLocation);
 }
 
-nn::Result<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
+nn::GeneralResult<hidl_vec<uint8_t>> convert(const nn::Model::OperandValues& operandValues) {
     return V1_0::utils::convert(operandValues);
 }
 
-nn::Result<hidl_memory> convert(const nn::Memory& memory) {
+nn::GeneralResult<hidl_memory> convert(const nn::Memory& memory) {
     return V1_0::utils::convert(memory);
 }
 
-nn::Result<V1_0::RequestArgument> convert(const nn::Request::Argument& argument) {
+nn::GeneralResult<V1_0::RequestArgument> convert(const nn::Request::Argument& argument) {
     return V1_0::utils::convert(argument);
 }
 
-nn::Result<V1_2::Operand::ExtraParams> convert(const nn::Operand::ExtraParams& extraParams) {
+nn::GeneralResult<V1_2::Operand::ExtraParams> convert(const nn::Operand::ExtraParams& extraParams) {
     return V1_2::utils::convert(extraParams);
 }
 
-nn::Result<V1_2::Model::ExtensionNameAndPrefix> convert(
+nn::GeneralResult<V1_2::Model::ExtensionNameAndPrefix> convert(
         const nn::Model::ExtensionNameAndPrefix& extensionNameAndPrefix) {
     return V1_2::utils::convert(extensionNameAndPrefix);
 }
@@ -338,7 +345,7 @@
 using ConvertOutput = std::decay_t<decltype(convert(std::declval<Input>()).value())>;
 
 template <typename Type>
-nn::Result<hidl_vec<ConvertOutput<Type>>> convertVec(const std::vector<Type>& arguments) {
+nn::GeneralResult<hidl_vec<ConvertOutput<Type>>> convertVec(const std::vector<Type>& arguments) {
     hidl_vec<ConvertOutput<Type>> halObject(arguments.size());
     for (size_t i = 0; i < arguments.size(); ++i) {
         halObject[i] = NN_TRY(convert(arguments[i]));
@@ -347,42 +354,41 @@
 }
 
 template <typename Type>
-nn::Result<hidl_vec<ConvertOutput<Type>>> convert(const std::vector<Type>& arguments) {
+nn::GeneralResult<hidl_vec<ConvertOutput<Type>>> convert(const std::vector<Type>& arguments) {
     return convertVec(arguments);
 }
 
-nn::Result<Request::MemoryPool> makeMemoryPool(const nn::Memory& memory) {
+nn::GeneralResult<Request::MemoryPool> makeMemoryPool(const nn::Memory& memory) {
     Request::MemoryPool ret;
     ret.hidlMemory(NN_TRY(convert(memory)));
     return ret;
 }
 
-nn::Result<Request::MemoryPool> makeMemoryPool(const nn::Request::MemoryDomainToken& token) {
+nn::GeneralResult<Request::MemoryPool> makeMemoryPool(const nn::Request::MemoryDomainToken& token) {
     Request::MemoryPool ret;
     ret.token(underlyingType(token));
     return ret;
 }
 
-nn::Result<Request::MemoryPool> makeMemoryPool(
-        const std::shared_ptr<const nn::IBuffer>& /*buffer*/) {
-    return NN_ERROR() << "Unable to make memory pool from IBuffer";
+nn::GeneralResult<Request::MemoryPool> makeMemoryPool(const nn::SharedBuffer& /*buffer*/) {
+    return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "Unable to make memory pool from IBuffer";
 }
 
 }  // anonymous namespace
 
-nn::Result<OperandType> convert(const nn::OperandType& operandType) {
+nn::GeneralResult<OperandType> convert(const nn::OperandType& operandType) {
     return static_cast<OperandType>(operandType);
 }
 
-nn::Result<OperationType> convert(const nn::OperationType& operationType) {
+nn::GeneralResult<OperationType> convert(const nn::OperationType& operationType) {
     return static_cast<OperationType>(operationType);
 }
 
-nn::Result<Priority> convert(const nn::Priority& priority) {
+nn::GeneralResult<Priority> convert(const nn::Priority& priority) {
     return static_cast<Priority>(priority);
 }
 
-nn::Result<Capabilities> convert(const nn::Capabilities& capabilities) {
+nn::GeneralResult<Capabilities> convert(const nn::Capabilities& capabilities) {
     std::vector<nn::Capabilities::OperandPerformance> operandPerformance;
     operandPerformance.reserve(capabilities.operandPerformance.asVector().size());
     std::copy_if(capabilities.operandPerformance.asVector().begin(),
@@ -403,7 +409,7 @@
     };
 }
 
-nn::Result<Capabilities::OperandPerformance> convert(
+nn::GeneralResult<Capabilities::OperandPerformance> convert(
         const nn::Capabilities::OperandPerformance& operandPerformance) {
     return Capabilities::OperandPerformance{
             .type = NN_TRY(convert(operandPerformance.type)),
@@ -411,7 +417,7 @@
     };
 }
 
-nn::Result<Operation> convert(const nn::Operation& operation) {
+nn::GeneralResult<Operation> convert(const nn::Operation& operation) {
     return Operation{
             .type = NN_TRY(convert(operation.type)),
             .inputs = operation.inputs,
@@ -419,14 +425,15 @@
     };
 }
 
-nn::Result<OperandLifeTime> convert(const nn::Operand::LifeTime& operandLifeTime) {
+nn::GeneralResult<OperandLifeTime> convert(const nn::Operand::LifeTime& operandLifeTime) {
     if (operandLifeTime == nn::Operand::LifeTime::POINTER) {
-        return NN_ERROR() << "Model cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Model cannot be converted because it contains pointer-based memory";
     }
     return static_cast<OperandLifeTime>(operandLifeTime);
 }
 
-nn::Result<Operand> convert(const nn::Operand& operand) {
+nn::GeneralResult<Operand> convert(const nn::Operand& operand) {
     return Operand{
             .type = NN_TRY(convert(operand.type)),
             .dimensions = operand.dimensions,
@@ -439,9 +446,10 @@
     };
 }
 
-nn::Result<Model> convert(const nn::Model& model) {
+nn::GeneralResult<Model> convert(const nn::Model& model) {
     if (!hal::utils::hasNoPointerData(model)) {
-        return NN_ERROR() << "Model cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Model cannot be converted because it contains pointer-based memory";
     }
 
     return Model{
@@ -454,7 +462,7 @@
     };
 }
 
-nn::Result<Subgraph> convert(const nn::Model::Subgraph& subgraph) {
+nn::GeneralResult<Subgraph> convert(const nn::Model::Subgraph& subgraph) {
     auto operands = NN_TRY(convert(subgraph.operands));
 
     // Update number of consumers.
@@ -473,11 +481,11 @@
     };
 }
 
-nn::Result<BufferDesc> convert(const nn::BufferDesc& bufferDesc) {
+nn::GeneralResult<BufferDesc> convert(const nn::BufferDesc& bufferDesc) {
     return BufferDesc{.dimensions = bufferDesc.dimensions};
 }
 
-nn::Result<BufferRole> convert(const nn::BufferRole& bufferRole) {
+nn::GeneralResult<BufferRole> convert(const nn::BufferRole& bufferRole) {
     return BufferRole{
             .modelIndex = bufferRole.modelIndex,
             .ioIndex = bufferRole.ioIndex,
@@ -485,9 +493,10 @@
     };
 }
 
-nn::Result<Request> convert(const nn::Request& request) {
+nn::GeneralResult<Request> convert(const nn::Request& request) {
     if (!hal::utils::hasNoPointerData(request)) {
-        return NN_ERROR() << "Request cannot be converted because it contains pointer-based memory";
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "Request cannot be converted because it contains pointer-based memory";
     }
 
     return Request{
@@ -497,30 +506,31 @@
     };
 }
 
-nn::Result<Request::MemoryPool> convert(const nn::Request::MemoryPool& memoryPool) {
+nn::GeneralResult<Request::MemoryPool> convert(const nn::Request::MemoryPool& memoryPool) {
     return std::visit([](const auto& o) { return makeMemoryPool(o); }, memoryPool);
 }
 
-nn::Result<OptionalTimePoint> convert(const nn::OptionalTimePoint& optionalTimePoint) {
+nn::GeneralResult<OptionalTimePoint> convert(const nn::OptionalTimePoint& optionalTimePoint) {
     OptionalTimePoint ret;
     if (optionalTimePoint.has_value()) {
         const auto count = optionalTimePoint.value().time_since_epoch().count();
         if (count < 0) {
-            return NN_ERROR() << "Unable to convert OptionalTimePoint because time since epoch "
-                                 "count is negative";
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                   << "Unable to convert OptionalTimePoint because time since epoch count is "
+                      "negative";
         }
         ret.nanosecondsSinceEpoch(count);
     }
     return ret;
 }
 
-nn::Result<OptionalTimeoutDuration> convert(
+nn::GeneralResult<OptionalTimeoutDuration> convert(
         const nn::OptionalTimeoutDuration& optionalTimeoutDuration) {
     OptionalTimeoutDuration ret;
     if (optionalTimeoutDuration.has_value()) {
         const auto count = optionalTimeoutDuration.value().count();
         if (count < 0) {
-            return NN_ERROR()
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
                    << "Unable to convert OptionalTimeoutDuration because count is negative";
         }
         ret.nanoseconds(count);
@@ -528,7 +538,7 @@
     return ret;
 }
 
-nn::Result<ErrorStatus> convert(const nn::ErrorStatus& errorStatus) {
+nn::GeneralResult<ErrorStatus> convert(const nn::ErrorStatus& errorStatus) {
     switch (errorStatus) {
         case nn::ErrorStatus::NONE:
         case nn::ErrorStatus::DEVICE_UNAVAILABLE:
@@ -545,7 +555,7 @@
     }
 }
 
-nn::Result<hidl_vec<BufferRole>> convert(const std::vector<nn::BufferRole>& bufferRoles) {
+nn::GeneralResult<hidl_vec<BufferRole>> convert(const std::vector<nn::BufferRole>& bufferRoles) {
     return convertVec(bufferRoles);
 }
 
diff --git a/neuralnetworks/1.3/utils/src/Device.cpp b/neuralnetworks/1.3/utils/src/Device.cpp
new file mode 100644
index 0000000..0fa244d
--- /dev/null
+++ b/neuralnetworks/1.3/utils/src/Device.cpp
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Device.h"
+
+#include "Buffer.h"
+#include "Callbacks.h"
+#include "Conversions.h"
+#include "PreparedModel.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/types.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <android/hardware/neuralnetworks/1.3/IDevice.h>
+#include <android/hardware/neuralnetworks/1.3/types.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/OperandTypes.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.1/Conversions.h>
+#include <nnapi/hal/1.2/Conversions.h>
+#include <nnapi/hal/1.2/Device.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <any>
+#include <functional>
+#include <memory>
+#include <optional>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+namespace {
+
+nn::GeneralResult<hidl_vec<sp<IPreparedModel>>> convert(
+        const std::vector<nn::SharedPreparedModel>& preparedModels) {
+    hidl_vec<sp<IPreparedModel>> hidlPreparedModels(preparedModels.size());
+    for (size_t i = 0; i < preparedModels.size(); ++i) {
+        std::any underlyingResource = preparedModels[i]->getUnderlyingResource();
+        if (const auto* hidlPreparedModel =
+                    std::any_cast<sp<IPreparedModel>>(&underlyingResource)) {
+            hidlPreparedModels[i] = *hidlPreparedModel;
+        } else {
+            return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+                   << "Unable to convert from nn::IPreparedModel to V1_3::IPreparedModel";
+        }
+    }
+    return hidlPreparedModels;
+}
+
+nn::GeneralResult<nn::SharedBuffer> convert(
+        nn::GeneralResult<std::shared_ptr<const Buffer>> result) {
+    return NN_TRY(std::move(result));
+}
+
+nn::GeneralResult<nn::Capabilities> initCapabilities(V1_3::IDevice* device) {
+    CHECK(device != nullptr);
+
+    nn::GeneralResult<nn::Capabilities> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                 << "uninitialized";
+    const auto cb = [&result](ErrorStatus status, const Capabilities& capabilities) {
+        if (status != ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "getCapabilities_1_3 failed with " << toString(status);
+        } else {
+            result = validatedConvertToCanonical(capabilities);
+        }
+    };
+
+    const auto ret = device->getCapabilities_1_3(cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+}  // namespace
+
+nn::GeneralResult<std::shared_ptr<const Device>> Device::create(std::string name,
+                                                                sp<V1_3::IDevice> device) {
+    if (name.empty()) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_3::utils::Device::create must have non-empty name";
+    }
+    if (device == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_3::utils::Device::create must have non-null device";
+    }
+
+    auto versionString = NN_TRY(V1_2::utils::initVersionString(device.get()));
+    const auto deviceType = NN_TRY(V1_2::utils::initDeviceType(device.get()));
+    auto extensions = NN_TRY(V1_2::utils::initExtensions(device.get()));
+    auto capabilities = NN_TRY(initCapabilities(device.get()));
+    const auto numberOfCacheFilesNeeded =
+            NN_TRY(V1_2::utils::initNumberOfCacheFilesNeeded(device.get()));
+
+    auto deathHandler = NN_TRY(hal::utils::DeathHandler::create(device));
+    return std::make_shared<const Device>(
+            PrivateConstructorTag{}, std::move(name), std::move(versionString), deviceType,
+            std::move(extensions), std::move(capabilities), numberOfCacheFilesNeeded,
+            std::move(device), std::move(deathHandler));
+}
+
+Device::Device(PrivateConstructorTag /*tag*/, std::string name, std::string versionString,
+               nn::DeviceType deviceType, std::vector<nn::Extension> extensions,
+               nn::Capabilities capabilities,
+               std::pair<uint32_t, uint32_t> numberOfCacheFilesNeeded, sp<V1_3::IDevice> device,
+               hal::utils::DeathHandler deathHandler)
+    : kName(std::move(name)),
+      kVersionString(std::move(versionString)),
+      kDeviceType(deviceType),
+      kExtensions(std::move(extensions)),
+      kCapabilities(std::move(capabilities)),
+      kNumberOfCacheFilesNeeded(numberOfCacheFilesNeeded),
+      kDevice(std::move(device)),
+      kDeathHandler(std::move(deathHandler)) {}
+
+const std::string& Device::getName() const {
+    return kName;
+}
+
+const std::string& Device::getVersionString() const {
+    return kVersionString;
+}
+
+nn::Version Device::getFeatureLevel() const {
+    return nn::Version::ANDROID_R;
+}
+
+nn::DeviceType Device::getType() const {
+    return kDeviceType;
+}
+
+const std::vector<nn::Extension>& Device::getSupportedExtensions() const {
+    return kExtensions;
+}
+
+const nn::Capabilities& Device::getCapabilities() const {
+    return kCapabilities;
+}
+
+std::pair<uint32_t, uint32_t> Device::getNumberOfCacheFilesNeeded() const {
+    return kNumberOfCacheFilesNeeded;
+}
+
+nn::GeneralResult<void> Device::wait() const {
+    const auto ret = kDevice->ping();
+    return hal::utils::handleTransportError(ret);
+}
+
+nn::GeneralResult<std::vector<bool>> Device::getSupportedOperations(const nn::Model& model) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+
+    nn::GeneralResult<std::vector<bool>> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                  << "uninitialized";
+    auto cb = [&result, &model](ErrorStatus status, const hidl_vec<bool>& supportedOperations) {
+        if (status != ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical)
+                     << "IDevice::getSupportedOperations_1_3 failed with " << toString(status);
+        } else if (supportedOperations.size() != model.main.operations.size()) {
+            result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                     << "IDevice::getSupportedOperations_1_3 returned vector of size "
+                     << supportedOperations.size() << " but expected "
+                     << model.main.operations.size();
+        } else {
+            result = supportedOperations;
+        }
+    };
+
+    const auto ret = kDevice->getSupportedOperations_1_3(hidlModel, cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModel(
+        const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+        nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    // Ensure that model is ready for IPC.
+    std::optional<nn::Model> maybeModelInShared;
+    const nn::Model& modelInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&model, &maybeModelInShared));
+
+    const auto hidlModel = NN_TRY(convert(modelInShared));
+    const auto hidlPreference = NN_TRY(V1_1::utils::convert(preference));
+    const auto hidlPriority = NN_TRY(convert(priority));
+    const auto hidlDeadline = NN_TRY(convert(deadline));
+    const auto hidlModelCache = NN_TRY(V1_2::utils::convert(modelCache));
+    const auto hidlDataCache = NN_TRY(V1_2::utils::convert(dataCache));
+    const auto hidlToken = token;
+
+    const auto cb = sp<PreparedModelCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret =
+            kDevice->prepareModel_1_3(hidlModel, hidlPreference, hidlPriority, hidlDeadline,
+                                      hidlModelCache, hidlDataCache, hidlToken, cb);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "prepareModel_1_3 failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> Device::prepareModelFromCache(
+        nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    const auto hidlDeadline = NN_TRY(convert(deadline));
+    const auto hidlModelCache = NN_TRY(V1_2::utils::convert(modelCache));
+    const auto hidlDataCache = NN_TRY(V1_2::utils::convert(dataCache));
+    const auto hidlToken = token;
+
+    const auto cb = sp<PreparedModelCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret = kDevice->prepareModelFromCache_1_3(hidlDeadline, hidlModelCache, hidlDataCache,
+                                                        hidlToken, cb);
+    const auto status = NN_TRY(hal::utils::handleTransportError(ret));
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "prepareModelFromCache_1_3 failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::GeneralResult<nn::SharedBuffer> Device::allocate(
+        const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+        const std::vector<nn::BufferRole>& inputRoles,
+        const std::vector<nn::BufferRole>& outputRoles) const {
+    const auto hidlDesc = NN_TRY(convert(desc));
+    const auto hidlPreparedModels = NN_TRY(convert(preparedModels));
+    const auto hidlInputRoles = NN_TRY(convert(inputRoles));
+    const auto hidlOutputRoles = NN_TRY(convert(outputRoles));
+
+    nn::GeneralResult<nn::SharedBuffer> result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+                                                 << "uninitialized";
+    auto cb = [&result](ErrorStatus status, const sp<IBuffer>& buffer, uint32_t token) {
+        if (status != ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "IDevice::allocate failed with " << toString(status);
+        } else if (buffer == nullptr) {
+            result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "Returned buffer is nullptr";
+        } else if (token == 0) {
+            result = NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "Returned token is invalid (0)";
+        } else {
+            result = convert(
+                    Buffer::create(buffer, static_cast<nn::Request::MemoryDomainToken>(token)));
+        }
+    };
+
+    const auto ret =
+            kDevice->allocate(hidlDesc, hidlPreparedModels, hidlInputRoles, hidlOutputRoles, cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+
+    return result;
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
diff --git a/neuralnetworks/1.3/utils/src/PreparedModel.cpp b/neuralnetworks/1.3/utils/src/PreparedModel.cpp
new file mode 100644
index 0000000..2781053
--- /dev/null
+++ b/neuralnetworks/1.3/utils/src/PreparedModel.cpp
@@ -0,0 +1,258 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PreparedModel.h"
+
+#include "Callbacks.h"
+#include "Conversions.h"
+#include "Utils.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/types.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+#include <android/hardware/neuralnetworks/1.3/IPreparedModel.h>
+#include <android/hardware/neuralnetworks/1.3/types.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.2/Conversions.h>
+#include <nnapi/hal/CommonUtils.h>
+#include <nnapi/hal/HandleError.h>
+#include <nnapi/hal/ProtectCallback.h>
+
+#include <memory>
+#include <tuple>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+namespace {
+
+nn::GeneralResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+convertExecutionResultsHelper(const hidl_vec<V1_2::OutputShape>& outputShapes,
+                              const V1_2::Timing& timing) {
+    return std::make_pair(NN_TRY(validatedConvertToCanonical(outputShapes)),
+                          NN_TRY(validatedConvertToCanonical(timing)));
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> convertExecutionResults(
+        const hidl_vec<V1_2::OutputShape>& outputShapes, const V1_2::Timing& timing) {
+    return hal::utils::makeExecutionFailure(convertExecutionResultsHelper(outputShapes, timing));
+}
+
+nn::GeneralResult<std::pair<nn::Timing, nn::Timing>> convertFencedExecutionCallbackResults(
+        const V1_2::Timing& timingLaunched, const V1_2::Timing& timingFenced) {
+    return std::make_pair(NN_TRY(validatedConvertToCanonical(timingLaunched)),
+                          NN_TRY(validatedConvertToCanonical(timingFenced)));
+}
+
+nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>>
+convertExecuteFencedResults(const hidl_handle& syncFence,
+                            const sp<IFencedExecutionCallback>& callback) {
+    auto resultSyncFence = nn::SyncFence::createAsSignaled();
+    if (syncFence.getNativeHandle() != nullptr) {
+        auto nativeHandle = NN_TRY(validatedConvertToCanonical(syncFence));
+        resultSyncFence = NN_TRY(hal::utils::makeGeneralFailure(
+                nn::SyncFence::create(std::move(nativeHandle)), nn::ErrorStatus::GENERAL_FAILURE));
+    }
+
+    if (callback == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "callback is null";
+    }
+
+    // Create callback which can be used to retrieve the execution error status and timings.
+    nn::ExecuteFencedInfoCallback resultCallback =
+            [callback]() -> nn::GeneralResult<std::pair<nn::Timing, nn::Timing>> {
+        nn::GeneralResult<std::pair<nn::Timing, nn::Timing>> result =
+                NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+        auto cb = [&result](ErrorStatus status, const V1_2::Timing& timingLaunched,
+                            const V1_2::Timing& timingFenced) {
+            if (status != ErrorStatus::NONE) {
+                const auto canonical = validatedConvertToCanonical(status).value_or(
+                        nn::ErrorStatus::GENERAL_FAILURE);
+                result = NN_ERROR(canonical) << "getExecutionInfo failed with " << toString(status);
+            } else {
+                result = convertFencedExecutionCallbackResults(timingLaunched, timingFenced);
+            }
+        };
+
+        const auto ret = callback->getExecutionInfo(cb);
+        NN_TRY(hal::utils::handleTransportError(ret));
+
+        return result;
+    };
+
+    return std::make_pair(std::move(resultSyncFence), std::move(resultCallback));
+}
+
+}  // namespace
+
+nn::GeneralResult<std::shared_ptr<const PreparedModel>> PreparedModel::create(
+        sp<V1_3::IPreparedModel> preparedModel) {
+    if (preparedModel == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "V1_3::utils::PreparedModel::create must have non-null preparedModel";
+    }
+
+    auto deathHandler = NN_TRY(hal::utils::DeathHandler::create(preparedModel));
+    return std::make_shared<const PreparedModel>(PrivateConstructorTag{}, std::move(preparedModel),
+                                                 std::move(deathHandler));
+}
+
+PreparedModel::PreparedModel(PrivateConstructorTag /*tag*/, sp<V1_3::IPreparedModel> preparedModel,
+                             hal::utils::DeathHandler deathHandler)
+    : kPreparedModel(std::move(preparedModel)), kDeathHandler(std::move(deathHandler)) {}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+PreparedModel::executeSynchronously(const Request& request, V1_2::MeasureTiming measure,
+                                    const OptionalTimePoint& deadline,
+                                    const OptionalTimeoutDuration& loopTimeoutDuration) const {
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> result =
+            NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+    const auto cb = [&result](ErrorStatus status, const hidl_vec<V1_2::OutputShape>& outputShapes,
+                              const V1_2::Timing& timing) {
+        if (status != ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "executeSynchronously failed with " << toString(status);
+        } else {
+            result = convertExecutionResults(outputShapes, timing);
+        }
+    };
+
+    const auto ret = kPreparedModel->executeSynchronously_1_3(request, measure, deadline,
+                                                              loopTimeoutDuration, cb);
+    NN_TRY(hal::utils::makeExecutionFailure(hal::utils::handleTransportError(ret)));
+
+    return result;
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+PreparedModel::executeAsynchronously(const Request& request, V1_2::MeasureTiming measure,
+                                     const OptionalTimePoint& deadline,
+                                     const OptionalTimeoutDuration& loopTimeoutDuration) const {
+    const auto cb = sp<ExecutionCallback>::make();
+    const auto scoped = kDeathHandler.protectCallback(cb.get());
+
+    const auto ret =
+            kPreparedModel->execute_1_3(request, measure, deadline, loopTimeoutDuration, cb);
+    const auto status =
+            NN_TRY(hal::utils::makeExecutionFailure(hal::utils::handleTransportError(ret)));
+    if (status != ErrorStatus::NONE) {
+        const auto canonical =
+                validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+        return NN_ERROR(canonical) << "executeAsynchronously failed with " << toString(status);
+    }
+
+    return cb->get();
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> PreparedModel::execute(
+        const nn::Request& request, nn::MeasureTiming measure,
+        const nn::OptionalTimePoint& deadline,
+        const nn::OptionalTimeoutDuration& loopTimeoutDuration) const {
+    // Ensure that request is ready for IPC.
+    std::optional<nn::Request> maybeRequestInShared;
+    const nn::Request& requestInShared = NN_TRY(hal::utils::makeExecutionFailure(
+            hal::utils::flushDataFromPointerToShared(&request, &maybeRequestInShared)));
+
+    const auto hidlRequest = NN_TRY(hal::utils::makeExecutionFailure(convert(requestInShared)));
+    const auto hidlMeasure =
+            NN_TRY(hal::utils::makeExecutionFailure(V1_2::utils::convert(measure)));
+    const auto hidlDeadline = NN_TRY(hal::utils::makeExecutionFailure(convert(deadline)));
+    const auto hidlLoopTimeoutDuration =
+            NN_TRY(hal::utils::makeExecutionFailure(convert(loopTimeoutDuration)));
+
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> result =
+            NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+    const bool preferSynchronous = true;
+
+    // Execute synchronously if allowed.
+    if (preferSynchronous) {
+        result = executeSynchronously(hidlRequest, hidlMeasure, hidlDeadline,
+                                      hidlLoopTimeoutDuration);
+    }
+
+    // Run asymchronous execution if execution has not already completed.
+    if (!result.has_value()) {
+        result = executeAsynchronously(hidlRequest, hidlMeasure, hidlDeadline,
+                                       hidlLoopTimeoutDuration);
+    }
+
+    // Flush output buffers if suxcessful execution.
+    if (result.has_value()) {
+        NN_TRY(hal::utils::makeExecutionFailure(
+                hal::utils::unflushDataFromSharedToPointer(request, maybeRequestInShared)));
+    }
+
+    return result;
+}
+
+nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>>
+PreparedModel::executeFenced(const nn::Request& request, const std::vector<nn::SyncFence>& waitFor,
+                             nn::MeasureTiming measure, const nn::OptionalTimePoint& deadline,
+                             const nn::OptionalTimeoutDuration& loopTimeoutDuration,
+                             const nn::OptionalTimeoutDuration& timeoutDurationAfterFence) const {
+    // Ensure that request is ready for IPC.
+    std::optional<nn::Request> maybeRequestInShared;
+    const nn::Request& requestInShared =
+            NN_TRY(hal::utils::flushDataFromPointerToShared(&request, &maybeRequestInShared));
+
+    const auto hidlRequest = NN_TRY(convert(requestInShared));
+    const auto hidlWaitFor = NN_TRY(hal::utils::convertSyncFences(waitFor));
+    const auto hidlMeasure = NN_TRY(V1_2::utils::convert(measure));
+    const auto hidlDeadline = NN_TRY(convert(deadline));
+    const auto hidlLoopTimeoutDuration = NN_TRY(convert(loopTimeoutDuration));
+    const auto hidlTimeoutDurationAfterFence = NN_TRY(convert(timeoutDurationAfterFence));
+
+    nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>> result =
+            NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "uninitialized";
+    auto cb = [&result](ErrorStatus status, const hidl_handle& syncFence,
+                        const sp<IFencedExecutionCallback>& callback) {
+        if (status != ErrorStatus::NONE) {
+            const auto canonical =
+                    validatedConvertToCanonical(status).value_or(nn::ErrorStatus::GENERAL_FAILURE);
+            result = NN_ERROR(canonical) << "executeFenced failed with " << toString(status);
+        } else {
+            result = convertExecuteFencedResults(syncFence, callback);
+        }
+    };
+
+    const auto ret = kPreparedModel->executeFenced(hidlRequest, hidlWaitFor, hidlMeasure,
+                                                   hidlDeadline, hidlLoopTimeoutDuration,
+                                                   hidlTimeoutDurationAfterFence, cb);
+    NN_TRY(hal::utils::handleTransportError(ret));
+    auto [syncFence, callback] = NN_TRY(std::move(result));
+
+    // If executeFenced required the request memory to be moved into shared memory, block here until
+    // the fenced execution has completed and flush the memory back.
+    if (maybeRequestInShared.has_value()) {
+        const auto state = syncFence.syncWait({});
+        if (state != nn::SyncFence::FenceState::SIGNALED) {
+            return NN_ERROR() << "syncWait failed with " << state;
+        }
+        NN_TRY(hal::utils::unflushDataFromSharedToPointer(request, maybeRequestInShared));
+    }
+
+    return std::make_pair(std::move(syncFence), std::move(callback));
+}
+
+std::any PreparedModel::getUnderlyingResource() const {
+    sp<V1_3::IPreparedModel> resource = kPreparedModel;
+    return resource;
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
diff --git a/neuralnetworks/1.3/utils/src/Service.cpp b/neuralnetworks/1.3/utils/src/Service.cpp
new file mode 100644
index 0000000..62887fb
--- /dev/null
+++ b/neuralnetworks/1.3/utils/src/Service.cpp
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Service.h"
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/ResilientDevice.h>
+#include <string>
+#include "Device.h"
+
+namespace android::hardware::neuralnetworks::V1_3::utils {
+
+nn::GeneralResult<nn::SharedDevice> getDevice(const std::string& name) {
+    hal::utils::ResilientDevice::Factory makeDevice =
+            [name](bool blocking) -> nn::GeneralResult<nn::SharedDevice> {
+        auto service = blocking ? IDevice::getService(name) : IDevice::tryGetService(name);
+        if (service == nullptr) {
+            return NN_ERROR() << (blocking ? "getService" : "tryGetService") << " returned nullptr";
+        }
+        return Device::create(name, std::move(service));
+    };
+
+    return hal::utils::ResilientDevice::create(std::move(makeDevice));
+}
+
+}  // namespace android::hardware::neuralnetworks::V1_3::utils
diff --git a/neuralnetworks/utils/common/Android.bp b/neuralnetworks/utils/common/Android.bp
index b61dc97..21562cf 100644
--- a/neuralnetworks/utils/common/Android.bp
+++ b/neuralnetworks/utils/common/Android.bp
@@ -20,6 +20,7 @@
     srcs: ["src/*"],
     local_include_dirs: ["include/nnapi/hal"],
     export_include_dirs: ["include"],
+    cflags: ["-Wthread-safety"],
     static_libs: [
         "neuralnetworks_types",
     ],
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/CommonUtils.h b/neuralnetworks/utils/common/include/nnapi/hal/CommonUtils.h
index 8c01368..43bb0c6 100644
--- a/neuralnetworks/utils/common/include/nnapi/hal/CommonUtils.h
+++ b/neuralnetworks/utils/common/include/nnapi/hal/CommonUtils.h
@@ -17,8 +17,11 @@
 #ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_COMMON_UTILS_H
 #define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_COMMON_UTILS_H
 
+#include <cutils/native_handle.h>
+#include <hidl/HidlSupport.h>
 #include <nnapi/Result.h>
 #include <nnapi/Types.h>
+#include <functional>
 #include <vector>
 
 // Shorthand
@@ -42,18 +45,27 @@
 bool hasNoPointerData(const nn::Request& request);
 
 // Relocate pointer-based data to shared memory.
-nn::Result<nn::Model> flushDataFromPointerToShared(const nn::Model& model);
-nn::Result<nn::Request> flushDataFromPointerToShared(const nn::Request& request);
+nn::GeneralResult<std::reference_wrapper<const nn::Model>> flushDataFromPointerToShared(
+        const nn::Model* model, std::optional<nn::Model>* maybeModelInSharedOut);
+nn::GeneralResult<std::reference_wrapper<const nn::Request>> flushDataFromPointerToShared(
+        const nn::Request* request, std::optional<nn::Request>* maybeRequestInSharedOut);
 
 // Undoes `flushDataFromPointerToShared` on a Request object. More specifically,
 // `unflushDataFromSharedToPointer` copies the output shared memory data from the transformed
 // Request object back to the output pointer-based memory in the original Request object.
-nn::Result<void> unflushDataFromSharedToPointer(const nn::Request& request,
-                                                const nn::Request& requestInShared);
+nn::GeneralResult<void> unflushDataFromSharedToPointer(
+        const nn::Request& request, const std::optional<nn::Request>& maybeRequestInShared);
 
 std::vector<uint32_t> countNumberOfConsumers(size_t numberOfOperands,
                                              const std::vector<nn::Operation>& operations);
 
+nn::GeneralResult<nn::Memory> createSharedMemoryFromHidlMemory(const hidl_memory& memory);
+
+nn::GeneralResult<hidl_handle> hidlHandleFromSharedHandle(const nn::SharedHandle& handle);
+nn::GeneralResult<nn::SharedHandle> sharedHandleFromNativeHandle(const native_handle_t* handle);
+nn::GeneralResult<hidl_vec<hidl_handle>> convertSyncFences(
+        const std::vector<nn::SyncFence>& fences);
+
 }  // namespace android::hardware::neuralnetworks::utils
 
 #endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_COMMON_UTILS_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/HandleError.h b/neuralnetworks/utils/common/include/nnapi/hal/HandleError.h
new file mode 100644
index 0000000..e4046b5
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/HandleError.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <android/hidl/base/1.0/IBase.h>
+#include <hidl/HidlSupport.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+namespace android::hardware::neuralnetworks::utils {
+
+template <typename Type>
+nn::GeneralResult<Type> handleTransportError(const hardware::Return<Type>& ret) {
+    if (ret.isDeadObject()) {
+        return NN_ERROR(nn::ErrorStatus::DEAD_OBJECT)
+               << "Return<>::isDeadObject returned true: " << ret.description();
+    }
+    if (!ret.isOk()) {
+        return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+               << "Return<>::isOk returned false: " << ret.description();
+    }
+    return ret;
+}
+
+template <>
+inline nn::GeneralResult<void> handleTransportError(const hardware::Return<void>& ret) {
+    if (ret.isDeadObject()) {
+        return NN_ERROR(nn::ErrorStatus::DEAD_OBJECT)
+               << "Return<>::isDeadObject returned true: " << ret.description();
+    }
+    if (!ret.isOk()) {
+        return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE)
+               << "Return<>::isOk returned false: " << ret.description();
+    }
+    return {};
+}
+
+template <typename Type>
+nn::GeneralResult<Type> makeGeneralFailure(nn::Result<Type> result, nn::ErrorStatus status) {
+    if (!result.has_value()) {
+        return nn::error(status) << std::move(result).error();
+    }
+    return std::move(result).value();
+}
+
+template <>
+inline nn::GeneralResult<void> makeGeneralFailure(nn::Result<void> result, nn::ErrorStatus status) {
+    if (!result.has_value()) {
+        return nn::error(status) << std::move(result).error();
+    }
+    return {};
+}
+
+template <typename Type>
+nn::ExecutionResult<Type> makeExecutionFailure(nn::Result<Type> result, nn::ErrorStatus status) {
+    if (!result.has_value()) {
+        return nn::error(status) << std::move(result).error();
+    }
+    return std::move(result).value();
+}
+
+template <>
+inline nn::ExecutionResult<void> makeExecutionFailure(nn::Result<void> result,
+                                                      nn::ErrorStatus status) {
+    if (!result.has_value()) {
+        return nn::error(status) << std::move(result).error();
+    }
+    return {};
+}
+
+template <typename Type>
+nn::ExecutionResult<Type> makeExecutionFailure(nn::GeneralResult<Type> result) {
+    if (!result.has_value()) {
+        const auto [message, status] = std::move(result).error();
+        return nn::error(status) << message;
+    }
+    return std::move(result).value();
+}
+
+template <>
+inline nn::ExecutionResult<void> makeExecutionFailure(nn::GeneralResult<void> result) {
+    if (!result.has_value()) {
+        const auto [message, status] = std::move(result).error();
+        return nn::error(status) << message;
+    }
+    return {};
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
\ No newline at end of file
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/InvalidBuffer.h b/neuralnetworks/utils/common/include/nnapi/hal/InvalidBuffer.h
new file mode 100644
index 0000000..8c04b88
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/InvalidBuffer.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_BUFFER_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_BUFFER_H
+
+#include <nnapi/IBuffer.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <memory>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+class InvalidBuffer final : public nn::IBuffer {
+  public:
+    nn::Request::MemoryDomainToken getToken() const override;
+
+    nn::GeneralResult<void> copyTo(const nn::Memory& dst) const override;
+
+    nn::GeneralResult<void> copyFrom(const nn::Memory& src,
+                                     const nn::Dimensions& dimensions) const override;
+};
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_BUFFER_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/InvalidDevice.h b/neuralnetworks/utils/common/include/nnapi/hal/InvalidDevice.h
new file mode 100644
index 0000000..5e62b9a
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/InvalidDevice.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_DEVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_DEVICE_H
+
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <memory>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+class InvalidDevice final : public nn::IDevice {
+  public:
+    InvalidDevice(std::string name, std::string versionString, nn::Version featureLevel,
+                  nn::DeviceType type, std::vector<nn::Extension> extensions,
+                  nn::Capabilities capabilities,
+                  std::pair<uint32_t, uint32_t> numberOfCacheFilesNeeded);
+
+    const std::string& getName() const override;
+    const std::string& getVersionString() const override;
+    nn::Version getFeatureLevel() const override;
+    nn::DeviceType getType() const override;
+    const std::vector<nn::Extension>& getSupportedExtensions() const override;
+    const nn::Capabilities& getCapabilities() const override;
+    std::pair<uint32_t, uint32_t> getNumberOfCacheFilesNeeded() const override;
+
+    nn::GeneralResult<void> wait() const override;
+
+    nn::GeneralResult<std::vector<bool>> getSupportedOperations(
+            const nn::Model& model) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModel(
+            const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelFromCache(
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedBuffer> allocate(
+            const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+            const std::vector<nn::BufferRole>& inputRoles,
+            const std::vector<nn::BufferRole>& outputRoles) const override;
+
+  private:
+    const std::string kName;
+    const std::string kVersionString;
+    const nn::Version kFeatureLevel;
+    const nn::DeviceType kType;
+    const std::vector<nn::Extension> kExtensions;
+    const nn::Capabilities kCapabilities;
+    const std::pair<uint32_t, uint32_t> kNumberOfCacheFilesNeeded;
+};
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_DEVICE_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/InvalidPreparedModel.h b/neuralnetworks/utils/common/include/nnapi/hal/InvalidPreparedModel.h
new file mode 100644
index 0000000..4b32b4e
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/InvalidPreparedModel.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_PREPARED_MODEL_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_PREPARED_MODEL_H
+
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <memory>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+class InvalidPreparedModel final : public nn::IPreparedModel {
+  public:
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> execute(
+            const nn::Request& request, nn::MeasureTiming measure,
+            const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration) const override;
+
+    nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>> executeFenced(
+            const nn::Request& request, const std::vector<nn::SyncFence>& waitFor,
+            nn::MeasureTiming measure, const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration,
+            const nn::OptionalTimeoutDuration& timeoutDurationAfterFence) const override;
+
+    std::any getUnderlyingResource() const override;
+};
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_INVALID_PREPARED_MODEL_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/ProtectCallback.h b/neuralnetworks/utils/common/include/nnapi/hal/ProtectCallback.h
new file mode 100644
index 0000000..85bd613
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/ProtectCallback.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_PROTECT_CALLBACK_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_PROTECT_CALLBACK_H
+
+#include <android-base/scopeguard.h>
+#include <android-base/thread_annotations.h>
+#include <android/hidl/base/1.0/IBase.h>
+#include <hidl/HidlSupport.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <functional>
+#include <mutex>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+class IProtectedCallback {
+  public:
+    /**
+     * Marks this object as a dead object.
+     */
+    virtual void notifyAsDeadObject() = 0;
+
+    // Public virtual destructor to allow objects to be stored (and destroyed) as smart pointers.
+    // E.g., std::unique_ptr<IProtectedCallback>.
+    virtual ~IProtectedCallback() = default;
+
+  protected:
+    // Protect the non-destructor special member functions to prevent object slicing.
+    IProtectedCallback() = default;
+    IProtectedCallback(const IProtectedCallback&) = default;
+    IProtectedCallback(IProtectedCallback&&) noexcept = default;
+    IProtectedCallback& operator=(const IProtectedCallback&) = default;
+    IProtectedCallback& operator=(IProtectedCallback&&) noexcept = default;
+};
+
+// Thread safe class
+class DeathRecipient final : public hidl_death_recipient {
+  public:
+    void serviceDied(uint64_t /*cookie*/, const wp<hidl::base::V1_0::IBase>& /*who*/) override;
+    // Precondition: `killable` must be non-null.
+    void add(IProtectedCallback* killable) const;
+    // Precondition: `killable` must be non-null.
+    void remove(IProtectedCallback* killable) const;
+
+  private:
+    mutable std::mutex mMutex;
+    mutable std::vector<IProtectedCallback*> mObjects GUARDED_BY(mMutex);
+};
+
+class DeathHandler final {
+  public:
+    static nn::GeneralResult<DeathHandler> create(sp<hidl::base::V1_0::IBase> object);
+
+    DeathHandler(const DeathHandler&) = delete;
+    DeathHandler(DeathHandler&&) noexcept = default;
+    DeathHandler& operator=(const DeathHandler&) = delete;
+    DeathHandler& operator=(DeathHandler&&) noexcept = delete;
+    ~DeathHandler();
+
+    using Cleanup = std::function<void()>;
+    // Precondition: `killable` must be non-null.
+    [[nodiscard]] base::ScopeGuard<Cleanup> protectCallback(IProtectedCallback* killable) const;
+
+  private:
+    DeathHandler(sp<hidl::base::V1_0::IBase> object, sp<DeathRecipient> deathRecipient);
+
+    sp<hidl::base::V1_0::IBase> kObject;
+    sp<DeathRecipient> kDeathRecipient;
+};
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_PROTECT_CALLBACK_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/ResilientBuffer.h b/neuralnetworks/utils/common/include/nnapi/hal/ResilientBuffer.h
new file mode 100644
index 0000000..996ec1e
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/ResilientBuffer.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_BUFFER_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_BUFFER_H
+
+#include <android-base/thread_annotations.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <functional>
+#include <memory>
+#include <mutex>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+class ResilientBuffer final : public nn::IBuffer {
+    struct PrivateConstructorTag {};
+
+  public:
+    using Factory = std::function<nn::GeneralResult<nn::SharedBuffer>(bool blocking)>;
+
+    static nn::GeneralResult<std::shared_ptr<const ResilientBuffer>> create(Factory makeBuffer);
+
+    explicit ResilientBuffer(PrivateConstructorTag tag, Factory makeBuffer,
+                             nn::SharedBuffer buffer);
+
+    nn::SharedBuffer getBuffer() const;
+    nn::SharedBuffer recover(const nn::IBuffer* failingBuffer, bool blocking) const;
+
+    nn::Request::MemoryDomainToken getToken() const override;
+
+    nn::GeneralResult<void> copyTo(const nn::Memory& dst) const override;
+
+    nn::GeneralResult<void> copyFrom(const nn::Memory& src,
+                                     const nn::Dimensions& dimensions) const override;
+
+  private:
+    const Factory kMakeBuffer;
+    mutable std::mutex mMutex;
+    mutable nn::SharedBuffer mBuffer GUARDED_BY(mMutex);
+};
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_BUFFER_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/ResilientDevice.h b/neuralnetworks/utils/common/include/nnapi/hal/ResilientDevice.h
new file mode 100644
index 0000000..4bfed6c
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/ResilientDevice.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_DEVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_DEVICE_H
+
+#include <android-base/thread_annotations.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <functional>
+#include <memory>
+#include <mutex>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+class ResilientDevice final : public nn::IDevice,
+                              public std::enable_shared_from_this<ResilientDevice> {
+    struct PrivateConstructorTag {};
+
+  public:
+    using Factory = std::function<nn::GeneralResult<nn::SharedDevice>(bool blocking)>;
+
+    static nn::GeneralResult<std::shared_ptr<const ResilientDevice>> create(Factory makeDevice);
+
+    explicit ResilientDevice(PrivateConstructorTag tag, Factory makeDevice, std::string name,
+                             std::string versionString, std::vector<nn::Extension> extensions,
+                             nn::Capabilities capabilities, nn::SharedDevice device);
+
+    nn::SharedDevice getDevice() const EXCLUDES(mMutex);
+    nn::SharedDevice recover(const nn::IDevice* failingDevice, bool blocking) const
+            EXCLUDES(mMutex);
+
+    const std::string& getName() const override;
+    const std::string& getVersionString() const override;
+    nn::Version getFeatureLevel() const override;
+    nn::DeviceType getType() const override;
+    const std::vector<nn::Extension>& getSupportedExtensions() const override;
+    const nn::Capabilities& getCapabilities() const override;
+    std::pair<uint32_t, uint32_t> getNumberOfCacheFilesNeeded() const override;
+
+    nn::GeneralResult<void> wait() const override;
+
+    nn::GeneralResult<std::vector<bool>> getSupportedOperations(
+            const nn::Model& model) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModel(
+            const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelFromCache(
+            nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache,
+            const nn::CacheToken& token) const override;
+
+    nn::GeneralResult<nn::SharedBuffer> allocate(
+            const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+            const std::vector<nn::BufferRole>& inputRoles,
+            const std::vector<nn::BufferRole>& outputRoles) const override;
+
+  private:
+    bool isValidInternal() const EXCLUDES(mMutex);
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelInternal(
+            bool blocking, const nn::Model& model, nn::ExecutionPreference preference,
+            nn::Priority priority, nn::OptionalTimePoint deadline,
+            const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const;
+    nn::GeneralResult<nn::SharedPreparedModel> prepareModelFromCacheInternal(
+            bool blocking, nn::OptionalTimePoint deadline,
+            const std::vector<nn::SharedHandle>& modelCache,
+            const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const;
+    nn::GeneralResult<nn::SharedBuffer> allocateInternal(
+            bool blocking, const nn::BufferDesc& desc,
+            const std::vector<nn::SharedPreparedModel>& preparedModels,
+            const std::vector<nn::BufferRole>& inputRoles,
+            const std::vector<nn::BufferRole>& outputRoles) const;
+
+    const Factory kMakeDevice;
+    const std::string kName;
+    const std::string kVersionString;
+    const std::vector<nn::Extension> kExtensions;
+    const nn::Capabilities kCapabilities;
+    mutable std::mutex mMutex;
+    mutable nn::SharedDevice mDevice GUARDED_BY(mMutex);
+    mutable bool mIsValid GUARDED_BY(mMutex) = true;
+};
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_DEVICE_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/ResilientPreparedModel.h b/neuralnetworks/utils/common/include/nnapi/hal/ResilientPreparedModel.h
new file mode 100644
index 0000000..c2940d1
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/ResilientPreparedModel.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_PREPARED_MODEL_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_PREPARED_MODEL_H
+
+#include <android-base/thread_annotations.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <functional>
+#include <memory>
+#include <mutex>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+class ResilientPreparedModel final : public nn::IPreparedModel {
+    struct PrivateConstructorTag {};
+
+  public:
+    using Factory = std::function<nn::GeneralResult<nn::SharedPreparedModel>(bool blocking)>;
+
+    static nn::GeneralResult<std::shared_ptr<const ResilientPreparedModel>> create(
+            Factory makePreparedModel);
+
+    explicit ResilientPreparedModel(PrivateConstructorTag tag, Factory makePreparedModel,
+                                    nn::SharedPreparedModel preparedModel);
+
+    nn::SharedPreparedModel getPreparedModel() const;
+    nn::SharedPreparedModel recover(const nn::IPreparedModel* failingPreparedModel,
+                                    bool blocking) const;
+
+    nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>> execute(
+            const nn::Request& request, nn::MeasureTiming measure,
+            const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration) const override;
+
+    nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>> executeFenced(
+            const nn::Request& request, const std::vector<nn::SyncFence>& waitFor,
+            nn::MeasureTiming measure, const nn::OptionalTimePoint& deadline,
+            const nn::OptionalTimeoutDuration& loopTimeoutDuration,
+            const nn::OptionalTimeoutDuration& timeoutDurationAfterFence) const override;
+
+    std::any getUnderlyingResource() const override;
+
+  private:
+    const Factory kMakePreparedModel;
+    mutable std::mutex mMutex;
+    mutable nn::SharedPreparedModel mPreparedModel GUARDED_BY(mMutex);
+};
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_COMMON_RESILIENT_PREPARED_MODEL_H
diff --git a/neuralnetworks/utils/common/include/nnapi/hal/TransferValue.h b/neuralnetworks/utils/common/include/nnapi/hal/TransferValue.h
new file mode 100644
index 0000000..7103c6b
--- /dev/null
+++ b/neuralnetworks/utils/common/include/nnapi/hal/TransferValue.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_TRANSFER_VALUE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_TRANSFER_VALUE_H
+
+#include <android-base/thread_annotations.h>
+
+#include <condition_variable>
+#include <mutex>
+#include <optional>
+
+namespace android::hardware::neuralnetworks::utils {
+
+// This class is thread safe.
+template <typename Type>
+class TransferValue final {
+  public:
+    void put(Type object) const;
+    [[nodiscard]] Type take() const;
+
+  private:
+    mutable std::mutex mMutex;
+    mutable std::condition_variable mCondition;
+    mutable std::optional<Type> mObject GUARDED_BY(mMutex);
+};
+
+// template implementation
+
+template <typename Type>
+void TransferValue<Type>::put(Type object) const {
+    {
+        std::lock_guard guard(mMutex);
+        // Immediately return if value already exists.
+        if (mObject.has_value()) return;
+        mObject.emplace(std::move(object));
+    }
+    mCondition.notify_all();
+}
+
+template <typename Type>
+Type TransferValue<Type>::take() const {
+    std::unique_lock lock(mMutex);
+    base::ScopedLockAssertion lockAssertion(mMutex);
+    mCondition.wait(lock, [this]() REQUIRES(mMutex) { return mObject.has_value(); });
+    std::optional<Type> object;
+    std::swap(object, mObject);
+    return std::move(object).value();
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_TRANSFER_VALUE_H
diff --git a/neuralnetworks/utils/common/src/CommonUtils.cpp b/neuralnetworks/utils/common/src/CommonUtils.cpp
index 667189b..c04c8df 100644
--- a/neuralnetworks/utils/common/src/CommonUtils.cpp
+++ b/neuralnetworks/utils/common/src/CommonUtils.cpp
@@ -16,7 +16,10 @@
 
 #include "CommonUtils.h"
 
+#include "HandleError.h"
+
 #include <android-base/logging.h>
+#include <android-base/unique_fd.h>
 #include <nnapi/Result.h>
 #include <nnapi/SharedMemory.h>
 #include <nnapi/TypeUtils.h>
@@ -25,6 +28,7 @@
 
 #include <algorithm>
 #include <any>
+#include <functional>
 #include <optional>
 #include <variant>
 #include <vector>
@@ -111,8 +115,18 @@
     return hasNoPointerData(request.inputs) && hasNoPointerData(request.outputs);
 }
 
-nn::Result<nn::Model> flushDataFromPointerToShared(const nn::Model& model) {
-    auto modelInShared = model;
+nn::GeneralResult<std::reference_wrapper<const nn::Model>> flushDataFromPointerToShared(
+        const nn::Model* model, std::optional<nn::Model>* maybeModelInSharedOut) {
+    CHECK(model != nullptr);
+    CHECK(maybeModelInSharedOut != nullptr);
+
+    if (hasNoPointerData(*model)) {
+        return *model;
+    }
+
+    // Make a copy of the model in order to make modifications. The modified model is returned to
+    // the caller through `maybeModelInSharedOut` if the function succeeds.
+    nn::Model modelInShared = *model;
 
     nn::ConstantMemoryBuilder memoryBuilder(modelInShared.pools.size());
     copyPointersToSharedMemory(&modelInShared.main, &memoryBuilder);
@@ -126,11 +140,22 @@
         modelInShared.pools.push_back(std::move(memory));
     }
 
-    return modelInShared;
+    *maybeModelInSharedOut = modelInShared;
+    return **maybeModelInSharedOut;
 }
 
-nn::Result<nn::Request> flushDataFromPointerToShared(const nn::Request& request) {
-    auto requestInShared = request;
+nn::GeneralResult<std::reference_wrapper<const nn::Request>> flushDataFromPointerToShared(
+        const nn::Request* request, std::optional<nn::Request>* maybeRequestInSharedOut) {
+    CHECK(request != nullptr);
+    CHECK(maybeRequestInSharedOut != nullptr);
+
+    if (hasNoPointerData(*request)) {
+        return *request;
+    }
+
+    // Make a copy of the request in order to make modifications. The modified request is returned
+    // to the caller through `maybeRequestInSharedOut` if the function succeeds.
+    nn::Request requestInShared = *request;
 
     // Change input pointers to shared memory.
     nn::ConstantMemoryBuilder inputBuilder(requestInShared.pools.size());
@@ -171,15 +196,17 @@
         requestInShared.pools.push_back(std::move(memory));
     }
 
-    return requestInShared;
+    *maybeRequestInSharedOut = requestInShared;
+    return **maybeRequestInSharedOut;
 }
 
-nn::Result<void> unflushDataFromSharedToPointer(const nn::Request& request,
-                                                const nn::Request& requestInShared) {
-    if (requestInShared.pools.empty() ||
-        !std::holds_alternative<nn::Memory>(requestInShared.pools.back())) {
+nn::GeneralResult<void> unflushDataFromSharedToPointer(
+        const nn::Request& request, const std::optional<nn::Request>& maybeRequestInShared) {
+    if (!maybeRequestInShared.has_value() || maybeRequestInShared->pools.empty() ||
+        !std::holds_alternative<nn::Memory>(maybeRequestInShared->pools.back())) {
         return {};
     }
+    const auto& requestInShared = *maybeRequestInShared;
 
     // Map the memory.
     const auto& outputMemory = std::get<nn::Memory>(requestInShared.pools.back());
@@ -221,4 +248,67 @@
     return nn::countNumberOfConsumers(numberOfOperands, operations);
 }
 
+nn::GeneralResult<hidl_handle> hidlHandleFromSharedHandle(const nn::SharedHandle& handle) {
+    if (handle == nullptr) {
+        return {};
+    }
+
+    std::vector<base::unique_fd> fds;
+    fds.reserve(handle->fds.size());
+    for (const auto& fd : handle->fds) {
+        int dupFd = dup(fd);
+        if (dupFd == -1) {
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "Failed to dup the fd";
+        }
+        fds.emplace_back(dupFd);
+    }
+
+    native_handle_t* nativeHandle = native_handle_create(handle->fds.size(), handle->ints.size());
+    if (nativeHandle == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "Failed to create native_handle";
+    }
+    for (size_t i = 0; i < fds.size(); ++i) {
+        nativeHandle->data[i] = fds[i].release();
+    }
+    std::copy(handle->ints.begin(), handle->ints.end(), &nativeHandle->data[nativeHandle->numFds]);
+
+    hidl_handle hidlHandle;
+    hidlHandle.setTo(nativeHandle, /*shouldOwn=*/true);
+    return hidlHandle;
+}
+
+nn::GeneralResult<nn::SharedHandle> sharedHandleFromNativeHandle(const native_handle_t* handle) {
+    if (handle == nullptr) {
+        return nullptr;
+    }
+
+    std::vector<base::unique_fd> fds;
+    fds.reserve(handle->numFds);
+    for (int i = 0; i < handle->numFds; ++i) {
+        int dupFd = dup(handle->data[i]);
+        if (dupFd == -1) {
+            return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "Failed to dup the fd";
+        }
+        fds.emplace_back(dupFd);
+    }
+
+    std::vector<int> ints(&handle->data[handle->numFds],
+                          &handle->data[handle->numFds + handle->numInts]);
+
+    return std::make_shared<const nn::Handle>(nn::Handle{
+            .fds = std::move(fds),
+            .ints = std::move(ints),
+    });
+}
+
+nn::GeneralResult<hidl_vec<hidl_handle>> convertSyncFences(
+        const std::vector<nn::SyncFence>& syncFences) {
+    hidl_vec<hidl_handle> handles(syncFences.size());
+    for (size_t i = 0; i < syncFences.size(); ++i) {
+        handles[i] =
+                NN_TRY(hal::utils::hidlHandleFromSharedHandle(syncFences[i].getSharedHandle()));
+    }
+    return handles;
+}
+
 }  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/common/src/InvalidBuffer.cpp b/neuralnetworks/utils/common/src/InvalidBuffer.cpp
new file mode 100644
index 0000000..c6f75d7
--- /dev/null
+++ b/neuralnetworks/utils/common/src/InvalidBuffer.cpp
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "InvalidBuffer.h"
+
+#include <nnapi/IBuffer.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <memory>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+nn::Request::MemoryDomainToken InvalidBuffer::getToken() const {
+    return nn::Request::MemoryDomainToken{};
+}
+
+nn::GeneralResult<void> InvalidBuffer::copyTo(const nn::Memory& /*dst*/) const {
+    return NN_ERROR() << "InvalidBuffer";
+}
+
+nn::GeneralResult<void> InvalidBuffer::copyFrom(const nn::Memory& /*src*/,
+                                                const nn::Dimensions& /*dimensions*/) const {
+    return NN_ERROR() << "InvalidBuffer";
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/common/src/InvalidDevice.cpp b/neuralnetworks/utils/common/src/InvalidDevice.cpp
new file mode 100644
index 0000000..535ccb4
--- /dev/null
+++ b/neuralnetworks/utils/common/src/InvalidDevice.cpp
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "InvalidDevice.h"
+
+#include "InvalidBuffer.h"
+#include "InvalidPreparedModel.h"
+
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <memory>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+InvalidDevice::InvalidDevice(std::string name, std::string versionString, nn::Version featureLevel,
+                             nn::DeviceType type, std::vector<nn::Extension> extensions,
+                             nn::Capabilities capabilities,
+                             std::pair<uint32_t, uint32_t> numberOfCacheFilesNeeded)
+    : kName(std::move(name)),
+      kVersionString(std::move(versionString)),
+      kFeatureLevel(featureLevel),
+      kType(type),
+      kExtensions(std::move(extensions)),
+      kCapabilities(std::move(capabilities)),
+      kNumberOfCacheFilesNeeded(numberOfCacheFilesNeeded) {}
+
+const std::string& InvalidDevice::getName() const {
+    return kName;
+}
+
+const std::string& InvalidDevice::getVersionString() const {
+    return kVersionString;
+}
+
+nn::Version InvalidDevice::getFeatureLevel() const {
+    return kFeatureLevel;
+}
+
+nn::DeviceType InvalidDevice::getType() const {
+    return kType;
+}
+
+const std::vector<nn::Extension>& InvalidDevice::getSupportedExtensions() const {
+    return kExtensions;
+}
+
+const nn::Capabilities& InvalidDevice::getCapabilities() const {
+    return kCapabilities;
+}
+
+std::pair<uint32_t, uint32_t> InvalidDevice::getNumberOfCacheFilesNeeded() const {
+    return kNumberOfCacheFilesNeeded;
+}
+
+nn::GeneralResult<void> InvalidDevice::wait() const {
+    return NN_ERROR() << "InvalidDevice";
+}
+
+nn::GeneralResult<std::vector<bool>> InvalidDevice::getSupportedOperations(
+        const nn::Model& /*model*/) const {
+    return NN_ERROR() << "InvalidDevice";
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> InvalidDevice::prepareModel(
+        const nn::Model& /*model*/, nn::ExecutionPreference /*preference*/,
+        nn::Priority /*priority*/, nn::OptionalTimePoint /*deadline*/,
+        const std::vector<nn::SharedHandle>& /*modelCache*/,
+        const std::vector<nn::SharedHandle>& /*dataCache*/, const nn::CacheToken& /*token*/) const {
+    return NN_ERROR() << "InvalidDevice";
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> InvalidDevice::prepareModelFromCache(
+        nn::OptionalTimePoint /*deadline*/, const std::vector<nn::SharedHandle>& /*modelCache*/,
+        const std::vector<nn::SharedHandle>& /*dataCache*/, const nn::CacheToken& /*token*/) const {
+    return NN_ERROR() << "InvalidDevice";
+}
+
+nn::GeneralResult<nn::SharedBuffer> InvalidDevice::allocate(
+        const nn::BufferDesc& /*desc*/,
+        const std::vector<nn::SharedPreparedModel>& /*preparedModels*/,
+        const std::vector<nn::BufferRole>& /*inputRoles*/,
+        const std::vector<nn::BufferRole>& /*outputRoles*/) const {
+    return NN_ERROR() << "InvalidDevice";
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/common/src/InvalidPreparedModel.cpp b/neuralnetworks/utils/common/src/InvalidPreparedModel.cpp
new file mode 100644
index 0000000..9ae7a63
--- /dev/null
+++ b/neuralnetworks/utils/common/src/InvalidPreparedModel.cpp
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "InvalidPreparedModel.h"
+
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <memory>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+InvalidPreparedModel::execute(const nn::Request& /*request*/, nn::MeasureTiming /*measure*/,
+                              const nn::OptionalTimePoint& /*deadline*/,
+                              const nn::OptionalTimeoutDuration& /*loopTimeoutDuration*/) const {
+    return NN_ERROR() << "InvalidPreparedModel";
+}
+
+nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>>
+InvalidPreparedModel::executeFenced(
+        const nn::Request& /*request*/, const std::vector<nn::SyncFence>& /*waitFor*/,
+        nn::MeasureTiming /*measure*/, const nn::OptionalTimePoint& /*deadline*/,
+        const nn::OptionalTimeoutDuration& /*loopTimeoutDuration*/,
+        const nn::OptionalTimeoutDuration& /*timeoutDurationAfterFence*/) const {
+    return NN_ERROR() << "InvalidPreparedModel";
+}
+
+std::any InvalidPreparedModel::getUnderlyingResource() const {
+    return {};
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/common/src/ProtectCallback.cpp b/neuralnetworks/utils/common/src/ProtectCallback.cpp
new file mode 100644
index 0000000..1d9a307
--- /dev/null
+++ b/neuralnetworks/utils/common/src/ProtectCallback.cpp
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ProtectCallback.h"
+
+#include <android-base/logging.h>
+#include <android-base/scopeguard.h>
+#include <android-base/thread_annotations.h>
+#include <android/hidl/base/1.0/IBase.h>
+#include <hidl/HidlSupport.h>
+#include <nnapi/Result.h>
+#include <nnapi/hal/HandleError.h>
+
+#include <algorithm>
+#include <functional>
+#include <mutex>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+void DeathRecipient::serviceDied(uint64_t /*cookie*/, const wp<hidl::base::V1_0::IBase>& /*who*/) {
+    std::lock_guard guard(mMutex);
+    std::for_each(mObjects.begin(), mObjects.end(),
+                  [](IProtectedCallback* killable) { killable->notifyAsDeadObject(); });
+}
+
+void DeathRecipient::add(IProtectedCallback* killable) const {
+    CHECK(killable != nullptr);
+    std::lock_guard guard(mMutex);
+    mObjects.push_back(killable);
+}
+
+void DeathRecipient::remove(IProtectedCallback* killable) const {
+    CHECK(killable != nullptr);
+    std::lock_guard guard(mMutex);
+    const auto removedIter = std::remove(mObjects.begin(), mObjects.end(), killable);
+    mObjects.erase(removedIter);
+}
+
+nn::GeneralResult<DeathHandler> DeathHandler::create(sp<hidl::base::V1_0::IBase> object) {
+    if (object == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "utils::DeathHandler::create must have non-null object";
+    }
+    auto deathRecipient = sp<DeathRecipient>::make();
+
+    const auto ret = object->linkToDeath(deathRecipient, /*cookie=*/0);
+    const bool success = NN_TRY(handleTransportError(ret));
+    if (!success) {
+        return NN_ERROR(nn::ErrorStatus::GENERAL_FAILURE) << "IBase::linkToDeath returned false";
+    }
+
+    return DeathHandler(std::move(object), std::move(deathRecipient));
+}
+
+DeathHandler::DeathHandler(sp<hidl::base::V1_0::IBase> object, sp<DeathRecipient> deathRecipient)
+    : kObject(std::move(object)), kDeathRecipient(std::move(deathRecipient)) {
+    CHECK(kObject != nullptr);
+    CHECK(kDeathRecipient != nullptr);
+}
+
+DeathHandler::~DeathHandler() {
+    if (kObject != nullptr && kDeathRecipient != nullptr) {
+        const auto ret = kObject->unlinkToDeath(kDeathRecipient);
+        const auto maybeSuccess = handleTransportError(ret);
+        if (!maybeSuccess.has_value()) {
+            LOG(ERROR) << maybeSuccess.error().message;
+        } else if (!maybeSuccess.value()) {
+            LOG(ERROR) << "IBase::linkToDeath returned false";
+        }
+    }
+}
+
+[[nodiscard]] base::ScopeGuard<DeathHandler::Cleanup> DeathHandler::protectCallback(
+        IProtectedCallback* killable) const {
+    CHECK(killable != nullptr);
+    kDeathRecipient->add(killable);
+    return base::make_scope_guard(
+            [deathRecipient = kDeathRecipient, killable] { deathRecipient->remove(killable); });
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/common/src/ResilientBuffer.cpp b/neuralnetworks/utils/common/src/ResilientBuffer.cpp
new file mode 100644
index 0000000..984295b
--- /dev/null
+++ b/neuralnetworks/utils/common/src/ResilientBuffer.cpp
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ResilientBuffer.h"
+
+#include <android-base/logging.h>
+#include <android-base/thread_annotations.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <functional>
+#include <memory>
+#include <mutex>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+nn::GeneralResult<std::shared_ptr<const ResilientBuffer>> ResilientBuffer::create(
+        Factory makeBuffer) {
+    if (makeBuffer == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "utils::ResilientBuffer::create must have non-empty makeBuffer";
+    }
+    auto buffer = NN_TRY(makeBuffer(/*blocking=*/true));
+    CHECK(buffer != nullptr);
+    return std::make_shared<const ResilientBuffer>(PrivateConstructorTag{}, std::move(makeBuffer),
+                                                   std::move(buffer));
+}
+
+ResilientBuffer::ResilientBuffer(PrivateConstructorTag /*tag*/, Factory makeBuffer,
+                                 nn::SharedBuffer buffer)
+    : kMakeBuffer(std::move(makeBuffer)), mBuffer(std::move(buffer)) {
+    CHECK(kMakeBuffer != nullptr);
+    CHECK(mBuffer != nullptr);
+}
+
+nn::SharedBuffer ResilientBuffer::getBuffer() const {
+    std::lock_guard guard(mMutex);
+    return mBuffer;
+}
+nn::SharedBuffer ResilientBuffer::recover(const nn::IBuffer* /*failingBuffer*/,
+                                          bool /*blocking*/) const {
+    std::lock_guard guard(mMutex);
+    return mBuffer;
+}
+
+nn::Request::MemoryDomainToken ResilientBuffer::getToken() const {
+    return getBuffer()->getToken();
+}
+
+nn::GeneralResult<void> ResilientBuffer::copyTo(const nn::Memory& dst) const {
+    return getBuffer()->copyTo(dst);
+}
+
+nn::GeneralResult<void> ResilientBuffer::copyFrom(const nn::Memory& src,
+                                                  const nn::Dimensions& dimensions) const {
+    return getBuffer()->copyFrom(src, dimensions);
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/common/src/ResilientDevice.cpp b/neuralnetworks/utils/common/src/ResilientDevice.cpp
new file mode 100644
index 0000000..2f83c5c
--- /dev/null
+++ b/neuralnetworks/utils/common/src/ResilientDevice.cpp
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ResilientDevice.h"
+
+#include "InvalidBuffer.h"
+#include "InvalidDevice.h"
+#include "InvalidPreparedModel.h"
+#include "ResilientBuffer.h"
+#include "ResilientPreparedModel.h"
+
+#include <android-base/logging.h>
+#include <nnapi/IBuffer.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/TypeUtils.h>
+#include <nnapi/Types.h>
+
+#include <algorithm>
+#include <memory>
+#include <string>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+namespace {
+
+template <typename FnType>
+auto protect(const ResilientDevice& resilientDevice, const FnType& fn, bool blocking)
+        -> decltype(fn(*resilientDevice.getDevice())) {
+    auto device = resilientDevice.getDevice();
+    auto result = fn(*device);
+
+    // Immediately return if device is not dead.
+    if (result.has_value() || result.error().code != nn::ErrorStatus::DEAD_OBJECT) {
+        return result;
+    }
+
+    device = resilientDevice.recover(device.get(), blocking);
+    return fn(*device);
+}
+
+}  // namespace
+
+nn::GeneralResult<std::shared_ptr<const ResilientDevice>> ResilientDevice::create(
+        Factory makeDevice) {
+    if (makeDevice == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "utils::ResilientDevice::create must have non-empty makeDevice";
+    }
+    auto device = NN_TRY(makeDevice(/*blocking=*/true));
+    CHECK(device != nullptr);
+
+    auto name = device->getName();
+    auto versionString = device->getVersionString();
+    auto extensions = device->getSupportedExtensions();
+    auto capabilities = device->getCapabilities();
+
+    return std::make_shared<ResilientDevice>(PrivateConstructorTag{}, std::move(makeDevice),
+                                             std::move(name), std::move(versionString),
+                                             std::move(extensions), std::move(capabilities),
+                                             std::move(device));
+}
+
+ResilientDevice::ResilientDevice(PrivateConstructorTag /*tag*/, Factory makeDevice,
+                                 std::string name, std::string versionString,
+                                 std::vector<nn::Extension> extensions,
+                                 nn::Capabilities capabilities, nn::SharedDevice device)
+    : kMakeDevice(std::move(makeDevice)),
+      kName(std::move(name)),
+      kVersionString(std::move(versionString)),
+      kExtensions(std::move(extensions)),
+      kCapabilities(std::move(capabilities)),
+      mDevice(std::move(device)) {
+    CHECK(kMakeDevice != nullptr);
+    CHECK(mDevice != nullptr);
+}
+
+nn::SharedDevice ResilientDevice::getDevice() const {
+    std::lock_guard guard(mMutex);
+    return mDevice;
+}
+
+nn::SharedDevice ResilientDevice::recover(const nn::IDevice* failingDevice, bool blocking) const {
+    std::lock_guard guard(mMutex);
+
+    // Another caller updated the failing device.
+    if (mDevice.get() != failingDevice) {
+        return mDevice;
+    }
+
+    auto maybeDevice = kMakeDevice(blocking);
+    if (!maybeDevice.has_value()) {
+        const auto& [message, code] = maybeDevice.error();
+        LOG(ERROR) << "Failed to recover dead device with error " << code << ": " << message;
+        return mDevice;
+    }
+    auto device = std::move(maybeDevice).value();
+
+    // If recovered device has different metadata than what is cached (i.e., because it was
+    // updated), mark the device as invalid and preserve the cached data.
+    auto compare = [this, &device](auto fn) REQUIRES(mMutex) {
+        return std::invoke(fn, mDevice) != std::invoke(fn, device);
+    };
+    if (compare(&IDevice::getName) || compare(&IDevice::getVersionString) ||
+        compare(&IDevice::getFeatureLevel) || compare(&IDevice::getType) ||
+        compare(&IDevice::getSupportedExtensions) || compare(&IDevice::getCapabilities)) {
+        LOG(ERROR) << "Recovered device has different metadata than what is cached. Marking "
+                      "IDevice object as invalid.";
+        device = std::make_shared<const InvalidDevice>(
+                kName, kVersionString, mDevice->getFeatureLevel(), mDevice->getType(), kExtensions,
+                kCapabilities, mDevice->getNumberOfCacheFilesNeeded());
+        mIsValid = false;
+    }
+
+    mDevice = std::move(device);
+    return mDevice;
+}
+
+const std::string& ResilientDevice::getName() const {
+    return kName;
+}
+
+const std::string& ResilientDevice::getVersionString() const {
+    return kVersionString;
+}
+
+nn::Version ResilientDevice::getFeatureLevel() const {
+    return getDevice()->getFeatureLevel();
+}
+
+nn::DeviceType ResilientDevice::getType() const {
+    return getDevice()->getType();
+}
+
+const std::vector<nn::Extension>& ResilientDevice::getSupportedExtensions() const {
+    return kExtensions;
+}
+
+const nn::Capabilities& ResilientDevice::getCapabilities() const {
+    return kCapabilities;
+}
+
+std::pair<uint32_t, uint32_t> ResilientDevice::getNumberOfCacheFilesNeeded() const {
+    return getDevice()->getNumberOfCacheFilesNeeded();
+}
+
+nn::GeneralResult<void> ResilientDevice::wait() const {
+    const auto fn = [](const nn::IDevice& device) { return device.wait(); };
+    return protect(*this, fn, /*blocking=*/true);
+}
+
+nn::GeneralResult<std::vector<bool>> ResilientDevice::getSupportedOperations(
+        const nn::Model& model) const {
+    const auto fn = [&model](const nn::IDevice& device) {
+        return device.getSupportedOperations(model);
+    };
+    return protect(*this, fn, /*blocking=*/false);
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> ResilientDevice::prepareModel(
+        const nn::Model& model, nn::ExecutionPreference preference, nn::Priority priority,
+        nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    auto self = shared_from_this();
+    ResilientPreparedModel::Factory makePreparedModel =
+            [device = std::move(self), model, preference, priority, deadline, modelCache, dataCache,
+             token](bool blocking) -> nn::GeneralResult<nn::SharedPreparedModel> {
+        return device->prepareModelInternal(blocking, model, preference, priority, deadline,
+                                            modelCache, dataCache, token);
+    };
+    return ResilientPreparedModel::create(std::move(makePreparedModel));
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> ResilientDevice::prepareModelFromCache(
+        nn::OptionalTimePoint deadline, const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    auto self = shared_from_this();
+    ResilientPreparedModel::Factory makePreparedModel =
+            [device = std::move(self), deadline, modelCache, dataCache,
+             token](bool blocking) -> nn::GeneralResult<nn::SharedPreparedModel> {
+        return device->prepareModelFromCacheInternal(blocking, deadline, modelCache, dataCache,
+                                                     token);
+    };
+    return ResilientPreparedModel::create(std::move(makePreparedModel));
+}
+
+nn::GeneralResult<nn::SharedBuffer> ResilientDevice::allocate(
+        const nn::BufferDesc& desc, const std::vector<nn::SharedPreparedModel>& preparedModels,
+        const std::vector<nn::BufferRole>& inputRoles,
+        const std::vector<nn::BufferRole>& outputRoles) const {
+    auto self = shared_from_this();
+    ResilientBuffer::Factory makeBuffer =
+            [device = std::move(self), desc, preparedModels, inputRoles,
+             outputRoles](bool blocking) -> nn::GeneralResult<nn::SharedBuffer> {
+        return device->allocateInternal(blocking, desc, preparedModels, inputRoles, outputRoles);
+    };
+    return ResilientBuffer::create(std::move(makeBuffer));
+}
+
+bool ResilientDevice::isValidInternal() const {
+    std::lock_guard hold(mMutex);
+    return mIsValid;
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> ResilientDevice::prepareModelInternal(
+        bool blocking, const nn::Model& model, nn::ExecutionPreference preference,
+        nn::Priority priority, nn::OptionalTimePoint deadline,
+        const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    if (!isValidInternal()) {
+        return std::make_shared<const InvalidPreparedModel>();
+    }
+    const auto fn = [&model, preference, priority, deadline, &modelCache, &dataCache,
+                     token](const nn::IDevice& device) {
+        return device.prepareModel(model, preference, priority, deadline, modelCache, dataCache,
+                                   token);
+    };
+    return protect(*this, fn, blocking);
+}
+
+nn::GeneralResult<nn::SharedPreparedModel> ResilientDevice::prepareModelFromCacheInternal(
+        bool blocking, nn::OptionalTimePoint deadline,
+        const std::vector<nn::SharedHandle>& modelCache,
+        const std::vector<nn::SharedHandle>& dataCache, const nn::CacheToken& token) const {
+    if (!isValidInternal()) {
+        return std::make_shared<const InvalidPreparedModel>();
+    }
+    const auto fn = [deadline, &modelCache, &dataCache, token](const nn::IDevice& device) {
+        return device.prepareModelFromCache(deadline, modelCache, dataCache, token);
+    };
+    return protect(*this, fn, blocking);
+}
+
+nn::GeneralResult<nn::SharedBuffer> ResilientDevice::allocateInternal(
+        bool blocking, const nn::BufferDesc& desc,
+        const std::vector<nn::SharedPreparedModel>& preparedModels,
+        const std::vector<nn::BufferRole>& inputRoles,
+        const std::vector<nn::BufferRole>& outputRoles) const {
+    if (!isValidInternal()) {
+        return std::make_shared<const InvalidBuffer>();
+    }
+    const auto fn = [&desc, &preparedModels, &inputRoles, &outputRoles](const nn::IDevice& device) {
+        return device.allocate(desc, preparedModels, inputRoles, outputRoles);
+    };
+    return protect(*this, fn, blocking);
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/common/src/ResilientPreparedModel.cpp b/neuralnetworks/utils/common/src/ResilientPreparedModel.cpp
new file mode 100644
index 0000000..1c9ecba
--- /dev/null
+++ b/neuralnetworks/utils/common/src/ResilientPreparedModel.cpp
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ResilientPreparedModel.h"
+
+#include <android-base/logging.h>
+#include <android-base/thread_annotations.h>
+#include <nnapi/IPreparedModel.h>
+#include <nnapi/Result.h>
+#include <nnapi/Types.h>
+
+#include <functional>
+#include <memory>
+#include <mutex>
+#include <utility>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::utils {
+
+nn::GeneralResult<std::shared_ptr<const ResilientPreparedModel>> ResilientPreparedModel::create(
+        Factory makePreparedModel) {
+    if (makePreparedModel == nullptr) {
+        return NN_ERROR(nn::ErrorStatus::INVALID_ARGUMENT)
+               << "utils::ResilientPreparedModel::create must have non-empty makePreparedModel";
+    }
+    auto preparedModel = NN_TRY(makePreparedModel(/*blocking=*/true));
+    CHECK(preparedModel != nullptr);
+    return std::make_shared<ResilientPreparedModel>(
+            PrivateConstructorTag{}, std::move(makePreparedModel), std::move(preparedModel));
+}
+
+ResilientPreparedModel::ResilientPreparedModel(PrivateConstructorTag /*tag*/,
+                                               Factory makePreparedModel,
+                                               nn::SharedPreparedModel preparedModel)
+    : kMakePreparedModel(std::move(makePreparedModel)), mPreparedModel(std::move(preparedModel)) {
+    CHECK(kMakePreparedModel != nullptr);
+    CHECK(mPreparedModel != nullptr);
+}
+
+nn::SharedPreparedModel ResilientPreparedModel::getPreparedModel() const {
+    std::lock_guard guard(mMutex);
+    return mPreparedModel;
+}
+
+nn::SharedPreparedModel ResilientPreparedModel::recover(
+        const nn::IPreparedModel* /*failingPreparedModel*/, bool /*blocking*/) const {
+    std::lock_guard guard(mMutex);
+    return mPreparedModel;
+}
+
+nn::ExecutionResult<std::pair<std::vector<nn::OutputShape>, nn::Timing>>
+ResilientPreparedModel::execute(const nn::Request& request, nn::MeasureTiming measure,
+                                const nn::OptionalTimePoint& deadline,
+                                const nn::OptionalTimeoutDuration& loopTimeoutDuration) const {
+    return getPreparedModel()->execute(request, measure, deadline, loopTimeoutDuration);
+}
+
+nn::GeneralResult<std::pair<nn::SyncFence, nn::ExecuteFencedInfoCallback>>
+ResilientPreparedModel::executeFenced(
+        const nn::Request& request, const std::vector<nn::SyncFence>& waitFor,
+        nn::MeasureTiming measure, const nn::OptionalTimePoint& deadline,
+        const nn::OptionalTimeoutDuration& loopTimeoutDuration,
+        const nn::OptionalTimeoutDuration& timeoutDurationAfterFence) const {
+    return getPreparedModel()->executeFenced(request, waitFor, measure, deadline,
+                                             loopTimeoutDuration, timeoutDurationAfterFence);
+}
+
+std::any ResilientPreparedModel::getUnderlyingResource() const {
+    return getPreparedModel()->getUnderlyingResource();
+}
+
+}  // namespace android::hardware::neuralnetworks::utils
diff --git a/neuralnetworks/utils/service/Android.bp b/neuralnetworks/utils/service/Android.bp
new file mode 100644
index 0000000..402598c
--- /dev/null
+++ b/neuralnetworks/utils/service/Android.bp
@@ -0,0 +1,37 @@
+//
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_library_static {
+    name: "neuralnetworks_utils_hal_service",
+    defaults: ["neuralnetworks_utils_defaults"],
+    srcs: ["src/*"],
+    local_include_dirs: ["include/nnapi/hal"],
+    export_include_dirs: ["include"],
+    static_libs: [
+        "neuralnetworks_types",
+        "neuralnetworks_utils_hal_1_0",
+        "neuralnetworks_utils_hal_1_1",
+        "neuralnetworks_utils_hal_1_2",
+        "neuralnetworks_utils_hal_1_3",
+        "neuralnetworks_utils_hal_common",
+    ],
+    shared_libs: [
+        "android.hardware.neuralnetworks@1.0",
+        "android.hardware.neuralnetworks@1.1",
+        "android.hardware.neuralnetworks@1.2",
+        "android.hardware.neuralnetworks@1.3",
+    ],
+}
diff --git a/neuralnetworks/utils/service/include/nnapi/hal/Service.h b/neuralnetworks/utils/service/include/nnapi/hal/Service.h
new file mode 100644
index 0000000..e339627
--- /dev/null
+++ b/neuralnetworks/utils/service/include/nnapi/hal/Service.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_SERVICE_H
+#define ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_SERVICE_H
+
+#include <nnapi/IDevice.h>
+#include <nnapi/Types.h>
+#include <memory>
+#include <vector>
+
+namespace android::nn::hal {
+
+std::vector<nn::SharedDevice> getDevices();
+
+}  // namespace android::nn::hal
+
+#endif  // ANDROID_HARDWARE_INTERFACES_NEURALNETWORKS_UTILS_SERVICE_H
diff --git a/neuralnetworks/utils/service/src/Service.cpp b/neuralnetworks/utils/service/src/Service.cpp
new file mode 100644
index 0000000..a59549d
--- /dev/null
+++ b/neuralnetworks/utils/service/src/Service.cpp
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Service.h"
+
+#include <android-base/logging.h>
+#include <android/hardware/neuralnetworks/1.0/IDevice.h>
+#include <android/hardware/neuralnetworks/1.1/IDevice.h>
+#include <android/hardware/neuralnetworks/1.2/IDevice.h>
+#include <android/hardware/neuralnetworks/1.3/IDevice.h>
+#include <android/hidl/manager/1.2/IServiceManager.h>
+#include <hidl/ServiceManagement.h>
+#include <nnapi/IDevice.h>
+#include <nnapi/Result.h>
+#include <nnapi/TypeUtils.h>
+#include <nnapi/Types.h>
+#include <nnapi/hal/1.0/Service.h>
+#include <nnapi/hal/1.1/Service.h>
+#include <nnapi/hal/1.2/Service.h>
+#include <nnapi/hal/1.3/Service.h>
+
+#include <functional>
+#include <memory>
+#include <string>
+#include <type_traits>
+#include <unordered_set>
+#include <vector>
+
+namespace android::hardware::neuralnetworks::service {
+namespace {
+
+using getDeviceFn = std::add_pointer_t<nn::GeneralResult<nn::SharedDevice>(const std::string&)>;
+
+void getDevicesForVersion(const std::string& descriptor, getDeviceFn getDevice,
+                          std::vector<nn::SharedDevice>* devices,
+                          std::unordered_set<std::string>* registeredDevices) {
+    CHECK(devices != nullptr);
+    CHECK(registeredDevices != nullptr);
+
+    const auto names = getAllHalInstanceNames(descriptor);
+    for (const auto& name : names) {
+        if (const auto [it, unregistered] = registeredDevices->insert(name); unregistered) {
+            auto maybeDevice = getDevice(name);
+            if (maybeDevice.has_value()) {
+                auto device = std::move(maybeDevice).value();
+                CHECK(device != nullptr);
+                devices->push_back(std::move(device));
+            } else {
+                LOG(ERROR) << "getDevice(" << name << ") failed with " << maybeDevice.error().code
+                           << ": " << maybeDevice.error().message;
+            }
+        }
+    }
+}
+
+std::vector<nn::SharedDevice> getDevices() {
+    std::vector<nn::SharedDevice> devices;
+    std::unordered_set<std::string> registeredDevices;
+
+    getDevicesForVersion(V1_3::IDevice::descriptor, &V1_3::utils::getDevice, &devices,
+                         &registeredDevices);
+    getDevicesForVersion(V1_2::IDevice::descriptor, &V1_2::utils::getDevice, &devices,
+                         &registeredDevices);
+    getDevicesForVersion(V1_1::IDevice::descriptor, &V1_1::utils::getDevice, &devices,
+                         &registeredDevices);
+    getDevicesForVersion(V1_0::IDevice::descriptor, &V1_0::utils::getDevice, &devices,
+                         &registeredDevices);
+
+    return devices;
+}
+
+}  // namespace
+}  // namespace android::hardware::neuralnetworks::service
+
+namespace android::nn::hal {
+
+std::vector<nn::SharedDevice> getDevices() {
+    return hardware::neuralnetworks::service::getDevices();
+}
+
+}  // namespace android::nn::hal
diff --git a/radio/1.6/IRadio.hal b/radio/1.6/IRadio.hal
index 747b2f2..85e8cad 100644
--- a/radio/1.6/IRadio.hal
+++ b/radio/1.6/IRadio.hal
@@ -114,6 +114,9 @@
      *     addresses of the existing data connection. The format is defined in RFC-4291 section 2.2.
      *     For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless reason
      *     is DataRequestReason:HANDOVER.
+     * @param pduSessionId The pdu session id to be used for this data call.  A value of 0 means
+     *     no pdu session id was attached to this call.
+     *     Reference: 3GPP TS 24.007 section 11.2.3.1b
      *
      * Response function is IRadioResponse.setupDataCallResponse_1_6()
      *
@@ -121,7 +124,8 @@
      */
     oneway setupDataCall_1_6(int32_t serial, AccessNetwork accessNetwork,
             DataProfileInfo dataProfileInfo, bool roamingAllowed,
-            DataRequestReason reason, vec<LinkAddress> addresses, vec<string> dnses);
+            DataRequestReason reason, vec<LinkAddress> addresses, vec<string> dnses,
+            int32_t pduSessionId);
 
     /**
      * Send an SMS message
@@ -213,6 +217,13 @@
      * Each subsequent request to this method is processed only after the
      * completion of the previous one.
      *
+     * When the SIM is in POWER_DOWN, the modem should send an empty vector of
+     * AppStatus in CardStatus.applications. If a SIM in the POWER_DOWN state
+     * is removed and a new SIM is inserted, the new SIM should be in POWER_UP
+     * mode by default. If the device is turned off or restarted while the SIM
+     * is in POWER_DOWN, then the SIM should turn on normally in POWER_UP mode
+     * when the device turns back on.
+     *
      * Response callback is IRadioResponse.setSimCardPowerResponse_1_6().
      * Note that this differs from setSimCardPower_1_1 in that the response
      * callback should only be sent once the device has finished executing
@@ -231,9 +242,9 @@
      * 3. Disable NR dual connectivity and force secondary cell to be released
      * {NrDualConnectivityState:DISABLE_IMMEDIATE}
 
-     * Response callback is IRadioResponse.enableNRDualConnectivityResponse()
+     * Response callback is IRadioResponse.setNRDualConnectivityStateResponse()
      */
-    oneway enableNrDualConnectivity(int32_t serial,
+    oneway setNrDualConnectivityState(int32_t serial,
             NrDualConnectivityState nrDualConnectivityState);
 
     /**
@@ -290,12 +301,12 @@
      * @param serial Serial number of request.
      * @param id callId The identifier of the data call which is provided in SetupDataCallResult
      *
-     * Response function is IRadioResponse.beginHandoverResponse()
+     * Response function is IRadioResponse.startHandoverResponse()
      */
-    oneway beginHandover(int32_t serial, int32_t callId);
+    oneway startHandover(int32_t serial, int32_t callId);
 
     /**
-     * Indicates that a handover was cancelled after a call to IRadio::beginHandover.
+     * Indicates that a handover was cancelled after a call to IRadio::startHandover.
      *
      * Since the handover was unsuccessful, the modem retains ownership over any of the resources
      * being transferred and is still responsible for releasing them.
@@ -320,4 +331,56 @@
      */
     oneway setAllowedNetworkTypeBitmap(
             uint32_t serial, bitfield<RadioAccessFamily> networkTypeBitmap);
+
+    /**
+     * Control data throttling at modem.
+     *   - DataThrottlingAction:NO_DATA_THROTTLING should clear any existing
+     *     data throttling within the requested completion window.
+     *   - DataThrottlingAction:THROTTLE_SECONDARY_CARRIER: Remove any existing
+     *     throttling on anchor carrier and achieve maximum data throttling on
+     *     secondary carrier within the requested completion window.
+     *   - DataThrottlingAction:THROTTLE_ANCHOR_CARRIER: disable secondary
+     *     carrier and achieve maximum data throttling on anchor carrier by
+     *     requested completion window.
+     *   - DataThrottlingAction:HOLD: Immediately hold on to current level of
+     *     throttling.
+     *
+     * @param serial Serial number of request.
+     * @param dataThrottlingAction DataThrottlingAction as defined in types.hal
+     * @param completionWindowSecs window, in seconds, in which the requested
+     *     throttling action has to be achieved. This must be 0 when
+     *     dataThrottlingAction is DataThrottlingAction:HOLD.
+     *
+     * Response function is IRadioResponse.setDataThrottlingResponse()
+     */
+    oneway setDataThrottling(int32_t serial,
+            DataThrottlingAction dataThrottlingAction,
+            int32_t completionWindowSecs);
+
+    /**
+     * Get which bands the modem's background scan is acting on.
+     *
+     * @param serial Serial number of request.
+     *
+     * Response callback is IRadioResponse.getSystemSelectionChannelsResponse()
+     */
+    oneway getSystemSelectionChannels(int32_t serial);
+
+    /**
+     * Request current voice registration state.
+     *
+     * @param serial Serial number of request.
+     *
+     * Response function is IRadioResponse.getVoiceRegistrationStateResponse_1_6()
+     */
+    oneway getVoiceRegistrationState_1_6(int32_t serial);
+
+    /**
+     * Request current data registration state.
+     *
+     * @param serial Serial number of request.
+     *
+     * Response function is IRadioResponse.getDataRegistrationStateResponse_1_6()
+     */
+    oneway getDataRegistrationState_1_6(int32_t serial);
 };
diff --git a/radio/1.6/IRadioIndication.hal b/radio/1.6/IRadioIndication.hal
index c135090..f195c0e 100644
--- a/radio/1.6/IRadioIndication.hal
+++ b/radio/1.6/IRadioIndication.hal
@@ -18,6 +18,8 @@
 
 import @1.0::RadioIndicationType;
 import @1.5::IRadioIndication;
+import @1.6::SetupDataCallResult;
+import @1.6::LinkCapacityEstimate;
 
 /**
  * Interface declaring unsolicited radio indications.
@@ -53,4 +55,16 @@
      * @param apn Apn to unthrottle
      */
     oneway unthrottleApn(RadioIndicationType type, string apn);
+
+    /**
+     * Indicates current link capacity estimate.
+     * This replaces @1.2::IRadioIndication.currentLinkCapacityEstimate().
+     * This indication is sent whenever the reporting criteria, as set by
+     * @1.2::IRadio.setLinkCapacityReportingCriteria, are met and the indication is not
+     * suppressed by @1.2::IRadio.setIndicationFilter_1_2().
+     *
+     * @param type Type of radio indication
+     * @param lce LinkCapacityEstimate
+     */
+    oneway currentLinkCapacityEstimate_1_6(RadioIndicationType type, LinkCapacityEstimate lce);
 };
diff --git a/radio/1.6/IRadioResponse.hal b/radio/1.6/IRadioResponse.hal
index 523185e..29b8e9d 100644
--- a/radio/1.6/IRadioResponse.hal
+++ b/radio/1.6/IRadioResponse.hal
@@ -19,6 +19,7 @@
 import @1.0::SendSmsResult;
 import @1.6::RadioResponseInfo;
 import @1.5::IRadioResponse;
+import @1.6::RegStateResult;
 import @1.6::SetupDataCallResult;
 
 /**
@@ -207,7 +208,6 @@
      * Valid errors returned:
      *   RadioError:NONE
      *   RadioError:RADIO_NOT_AVAILABLE
-     *   RadioError:REQUEST_NOT_SUPPORTED
      *   RadioError:INVALID_ARGUMENTS
      *   RadioError:SIM_ERR (indicates a timeout or other issue making the SIM unresponsive)
      *
@@ -225,7 +225,7 @@
      *   RadioError:RADIO_NOT_AVAILABLE
      *   RadioError:INTERNAL_ERR
      */
-    oneway enableNrDualConnectivityResponse(RadioResponseInfo info);
+    oneway setNrDualConnectivityStateResponse(RadioResponseInfo info);
 
     /**
      * @param info Response info struct containing response type, serial no. and error
@@ -241,7 +241,7 @@
 
     /**
      * @param info Response info struct containing response type, serial no. and error
-     * @param id The allocated id. On an error, this is set to -1
+     * @param id The allocated id. On an error, this is set to 0.
      *
      * Valid errors returned:
      *   RadioError:NONE
@@ -275,7 +275,7 @@
      *   RadioError:REQUEST_NOT_SUPPORTED
      *   RadioError:INVALID_CALL_ID
      */
-    oneway beginHandoverResponse(RadioResponseInfo info);
+    oneway startHandoverResponse(RadioResponseInfo info);
 
     /**
      * @param info Response info struct containing response type, serial no. and error
@@ -306,4 +306,53 @@
      *   RadioError:NO_RESOURCES
      */
     oneway setAllowedNetworkTypeBitmapResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     *  Valid errors returned:
+     *  RadioError:NONE
+     *  RadioError:RADIO_NOT_AVAILABLE
+     *  RadioError:MODEM_ERR
+     *  RadioError:INVALID_ARGUMENTS
+     */
+    oneway setDataThrottlingResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:INVALID_ARGUMENTS
+     */
+    oneway getSystemSelectionChannelsResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param voiceRegResponse Current Voice registration response as defined by RegStateResult
+     *        in types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     */
+    oneway getVoiceRegistrationStateResponse_1_6(RadioResponseInfo info,
+            RegStateResult voiceRegResponse);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param dataRegResponse Current Data registration response as defined by RegStateResult in
+     *        types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NOT_PROVISIONED
+     */
+    oneway getDataRegistrationStateResponse_1_6(RadioResponseInfo info,
+            RegStateResult dataRegResponse);
 };
diff --git a/radio/1.6/types.hal b/radio/1.6/types.hal
index a98cd1f..cfa2cde 100644
--- a/radio/1.6/types.hal
+++ b/radio/1.6/types.hal
@@ -18,6 +18,16 @@
 
 import @1.0::RadioError;
 import @1.0::RadioResponseType;
+import @1.0::RegState;
+import @1.4::DataCallFailCause;
+import @1.4::DataConnActiveStatus;
+import @1.4::PdpProtocolType;
+import @1.4::RadioTechnology;
+import @1.5::CellIdentity;
+import @1.5::LinkAddress;
+import @1.5::RegStateResult.AccessTechnologySpecificInfo.Cdma2000RegistrationInfo;
+import @1.5::RegStateResult.AccessTechnologySpecificInfo.EutranRegistrationInfo;
+import @1.5::RegistrationFailCause;
 import @1.5::SetupDataCallResult;
 
 import android.hidl.safe_union@1.0::Monostate;
@@ -240,8 +250,72 @@
     NO_FALLBACK_RETRY_SETUP_NORMAL = 3
 };
 
+/**
+ * Overwritten from @1.5::SetupDataCallResult in order to change the suggestedRetryTime
+ * to 64-bit value. In the future, this must be extended instead of overwritten.
+ * Also added defaultQos, qosSessions, and handoverFailureMode in this version.
+ */
 struct SetupDataCallResult {
-    @1.5::SetupDataCallResult base;
+    /** Data call fail cause. DataCallFailCause.NONE if no error. */
+    DataCallFailCause cause;
+
+    /**
+     * If cause is not DataCallFailCause.NONE, this field indicates the network suggested data
+     * retry back-off time in milliseconds. Negative value indicates network does not give any
+     * suggestion. 0 indicates retry should be performed immediately. 0x7fffffffffffffff indicates
+     * the device should not retry data setup anymore.
+     */
+    uint64_t suggestedRetryTime;
+
+    /** Context ID, uniquely identifies this data connection. */
+    int32_t cid;
+
+    /** Data connection active status. */
+    DataConnActiveStatus active;
+
+    /**
+     * PDP protocol type. If cause is DataCallFailCause.ONLY_SINGLE_BEARER_ALLOWED, this is the
+     * protocol type supported, such as "IP" or "IPV6".
+     */
+    PdpProtocolType type;
+
+    /** The network interface name. */
+    string ifname;
+
+    /**
+     * List of link address.
+     */
+    vec<LinkAddress> addresses;
+
+    /**
+     * List of DNS server addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". Empty if no dns
+     * server addresses returned.
+     */
+    vec<string> dnses;
+
+    /**
+     * List of default gateway addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+     * When empty, the addresses represent point to point connections.
+     */
+    vec<string> gateways;
+
+    /**
+     * List of P-CSCF(Proxy Call State Control Function) addresses via PCO(Protocol Configuration
+     * Option), e.g., "2001:db8::1 2001:db8::2 2001:db8::3". Empty if not IMS client.
+     */
+    vec<string> pcscf;
+
+    /**
+     * MTU received from network for IPv4.
+     * Value <= 0 means network has either not sent a value or sent an invalid value.
+     */
+    int32_t mtuV4;
+
+    /**
+     * MTU received from network for IPv6.
+     * Value <= 0 means network has either not sent a value or sent an invalid value.
+     */
+    int32_t mtuV6;
 
     /** Default bearer QoS. Applicable to LTE and NR */
     Qos defaultQos;
@@ -284,3 +358,206 @@
      */
     DISABLE_IMMEDIATE= 3,
 };
+
+/**
+ * Overwritten from @1.2::LinkCapacityEstimate to update LinkCapacityEstimate to 1.6 version.
+ */
+struct LinkCapacityEstimate {
+
+   /**
+    * Estimated downlink capacity in kbps. In case of a dual connected network,
+    * this includes capacity of both primary and secondary. This bandwidth estimate shall be
+    * the estimated maximum sustainable link bandwidth (as would be measured
+    * at the Upper PDCP or SNDCP SAP). If the DL Aggregate Maximum Bit Rate is known,
+    * this value shall not exceed the DL-AMBR for the Internet PDN connection.
+    * This must be filled with -1 if network is not connected.
+    */
+   uint32_t downlinkCapacityKbps;
+
+   /**
+    * Estimated uplink capacity in kbps. In case of a dual connected network,
+    * this includes capacity of both primary and secondary. This bandwidth estimate shall be the
+    * estimated maximum sustainable link bandwidth (as would be measured at the
+    * Upper PDCP or SNDCP SAP). If the UL Aggregate Maximum Bit Rate is known,
+    * this value shall not exceed the UL-AMBR for the Internet PDN connection.
+    * This must be filled with -1 if network is not connected.
+    */
+   uint32_t uplinkCapacityKbps;
+
+   /**
+    * Estimated downlink capacity of secondary carrier in a dual connected NR mode in kbps.
+    * This bandwidth estimate shall be the estimated maximum sustainable link bandwidth
+    * (as would be measured at the Upper PDCP or SNDCP SAP). This is valid only
+    * in if device is connected to both primary and secodary in dual connected
+    * mode. This must be filled with -1 if secondary is not connected.
+    */
+   uint32_t secondaryDownlinkCapacityKbps;
+
+   /**
+    * Estimated uplink capacity secondary carrier in a dual connected NR mode in kbps.
+    * This bandwidth estimate shall be the estimated
+    * maximum sustainable link bandwidth (as would be measured at the Upper PDCP or SNDCP SAP).
+    * This is valid only in if device is connected to both primary and secodary in dual connected
+    * mode.This must be filled with -1 if secondary is not connected.
+    */
+   uint32_t secondaryUplinkCapacityKbps;
+};
+
+enum DataThrottlingAction : int32_t {
+    /* Clear all existing data throttling. */
+    NO_DATA_THROTTLING = 0,
+
+    /**
+     * Enact secondary carrier data throttling and remove any existing data
+     * throttling on anchor carrier.
+     */
+    THROTTLE_SECONDARY_CARRIER = 1,
+
+    /**
+     * Enact anchor carrier data throttling and disable data on secondary
+     * carrier if currently enabled.
+     */
+    THROTTLE_ANCHOR_CARRIER = 2,
+
+    /**
+     * Immediately hold on to current level of throttling.
+     */
+    HOLD = 3
+};
+
+/**
+ * Defines the values for VoPS indicator of NR as per 3gpp spec 24.501 sec 9.10.3.5
+ */
+enum VopsIndicator : uint8_t {
+    /** IMS voice over PS session not supported */
+    VOPS_NOT_SUPPORTED = 0,
+    /** IMS voice over PS session supported over 3GPP access */
+    VOPS_OVER_3GPP = 1,
+    /** IMS voice over PS session supported over non-3GPP access */
+    VOPS_OVER_NON_3GPP = 2,
+};
+
+/**
+ * Defines the values for emergency service indicator of NR
+ * as per 3gpp spec 24.501 sec 9.10.3.5
+ */
+enum EmcIndicator : uint8_t {
+    /** Emergency services not supported */
+    EMC_NOT_SUPPORTED = 0,
+    /** Emergency services supported in NR connected to 5GCN only */
+    EMC_NR_CONNECTED_TO_5GCN = 1,
+    /** Emergency services supported in E-UTRA connected to 5GCN only */
+    EMC_EUTRA_CONNECTED_TO_5GCN = 2,
+    /** Emergency services supported in NR connected to 5GCN and E-UTRA connected to 5GCN */
+    EMC_BOTH_NR_EUTRA_CONNECTED_TO_5GCN = 3
+};
+
+/**
+ * Defines the values for emergency service fallback indicator of NR
+ * as per 3gpp spec 24.501 sec 9.10.3.5
+ */
+enum EmfIndicator : uint8_t {
+    /** Emergency services fallback not supported */
+    EMF_NOT_SUPPORTED = 0,
+    /** Emergency services fallback supported in NR connected to 5GCN only */
+    EMF_NR_CONNECTED_TO_5GCN = 1,
+    /** Emergency services fallback supported in E-UTRA connected to 5GCN only */
+    EMF_EUTRA_CONNECTED_TO_5GCN = 2,
+    /**
+     * Emergency services fallback supported in NR connected to 5GCN and E-UTRA
+     * connected to 5GCN.
+     */
+    EMF_BOTH_NR_EUTRA_CONNECTED_TO_5GCN = 3
+};
+
+/**
+ * Type to define the NR specific network capabilities for voice over PS including
+ * emergency and normal voice calls.
+ */
+struct NrVopsInfo {
+    /**
+     * This indicates if the camped network supports VoNR services, and what kind of services
+     * it supports. This information is received from NR network during NR NAS registration
+     * procedure through NR REGISTRATION ACCEPT.
+     * Refer 3GPP 24.501 EPS 5GS network feature support -> IMS VoPS
+     */
+    VopsIndicator vopsSupported;
+
+    /**
+     * This indicates if the camped network supports VoNR emergency service. This information
+     * is received from NR network through two sources:
+     * a. During NR NAS registration procedure through NR REGISTRATION ACCEPT.
+     *    Refer 3GPP 24.501 EPS 5GS network feature support -> EMC
+     * b. In case the device is not registered on the network.
+     *    Refer 3GPP 38.331 SIB1 : ims-EmergencySupport
+     *    If device is registered on NR, then this field indicates whether the cell
+     *    supports IMS emergency bearer services for UEs in limited service mode.
+     */
+    EmcIndicator emcSupported;
+
+    /**
+     * This indicates if the camped network supports VoNR emergency service fallback. This
+     * information is received from NR network during NR NAS registration procedure through
+     * NR REGISTRATION ACCEPT.
+     * Refer 3GPP 24.501 EPS 5GS network feature support -> EMF
+     */
+    EmfIndicator emfSupported;
+};
+
+/**
+ * Overwritten from @1.5::RegStateResult to 1.6 to support NrRegistrationInfo
+ * version.
+ */
+struct RegStateResult {
+    /**
+     * Registration state
+     *
+     * If the RAT is indicated as a GERAN, UTRAN, or CDMA2000 technology, this value reports
+     * registration in the Circuit-switched domain.
+     * If the RAT is indicated as an EUTRAN, NGRAN, or another technology that does not support
+     * circuit-switched services, this value reports registration in the Packet-switched domain.
+     */
+    RegState regState;
+
+    /**
+     * Indicates the available voice radio technology, valid values as
+     * defined by RadioTechnology.
+     */
+    RadioTechnology rat;
+
+    /**
+     * Cause code reported by the network in case registration fails. This will be a mobility
+     * management cause code defined for MM, GMM, MME or equivalent as appropriate for the RAT.
+     */
+    RegistrationFailCause reasonForDenial;
+
+    /** CellIdentity */
+    CellIdentity cellIdentity;
+
+    /**
+     * The most-recent PLMN-ID upon which the UE registered (or attempted to register if a failure
+     * is reported in the reasonForDenial field). This PLMN shall be in standard format consisting
+     * of a 3 digit MCC concatenated with a 2 or 3 digit MNC.
+     */
+    string registeredPlmn;
+
+    /**
+     * Access-technology-specific registration information, such as for CDMA2000.
+     */
+    safe_union AccessTechnologySpecificInfo {
+        Monostate noinit;
+
+        Cdma2000RegistrationInfo cdmaInfo;
+
+        EutranRegistrationInfo eutranInfo;
+
+        struct NgranRegistrationInfo {
+            /**
+             * Network capabilities for voice over PS services. This info is valid only on NR
+             * network and must be present when the device is camped on NR. VopsInfo must be
+             * empty when the device is not camped on NR.
+             */
+            NrVopsInfo nrVopsInfo;
+        } ngranInfo;
+    } accessTechnologySpecificInfo;
+};
diff --git a/radio/1.6/vts/functional/radio_hidl_hal_api.cpp b/radio/1.6/vts/functional/radio_hidl_hal_api.cpp
index 01236c6..ba825b8 100644
--- a/radio/1.6/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.6/vts/functional/radio_hidl_hal_api.cpp
@@ -57,7 +57,7 @@
             ::android::hardware::radio::V1_2::DataRequestReason::NORMAL;
 
     Return<void> res = radio_v1_6->setupDataCall_1_6(serial, accessNetwork, dataProfileInfo,
-                                                     roamingAllowed, reason, addresses, dnses);
+                                                     roamingAllowed, reason, addresses, dnses, -1);
     ASSERT_OK(res);
 
     EXPECT_EQ(std::cv_status::no_timeout, wait());
@@ -260,13 +260,13 @@
 }
 
 /*
- * Test IRadio.enableNrDualConnectivity() for the response returned.
+ * Test IRadio.setNrDualConnectivityState() for the response returned.
  */
-TEST_P(RadioHidlTest_v1_6, enableNrDualConnectivity) {
+TEST_P(RadioHidlTest_v1_6, setNrDualConnectivityState) {
     serial = GetRandomSerialNumber();
 
     Return<void> res =
-            radio_v1_6->enableNrDualConnectivity(serial, NrDualConnectivityState::DISABLE);
+            radio_v1_6->setNrDualConnectivityState(serial, NrDualConnectivityState::DISABLE);
     ASSERT_OK(res);
 
     EXPECT_EQ(std::cv_status::no_timeout, wait());
@@ -295,3 +295,113 @@
                                   ::android::hardware::radio::V1_6::RadioError::INTERNAL_ERR,
                                   ::android::hardware::radio::V1_6::RadioError::NONE}));
 }
+
+/*
+ * Test IRadio.setDataThrottling() for the response returned.
+ */
+TEST_P(RadioHidlTest_v1_6, setDataThrottling) {
+    serial = GetRandomSerialNumber();
+
+    Return<void> res = radio_v1_6->setDataThrottling(
+            serial, DataThrottlingAction::THROTTLE_SECONDARY_CARRIER, 60);
+    ASSERT_OK(res);
+
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
+    ASSERT_TRUE(
+            CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                             {::android::hardware::radio::V1_6::RadioError::RADIO_NOT_AVAILABLE,
+                              ::android::hardware::radio::V1_6::RadioError::MODEM_ERR,
+                              ::android::hardware::radio::V1_6::RadioError::NONE,
+                              ::android::hardware::radio::V1_6::RadioError::INVALID_ARGUMENTS}));
+
+    serial = GetRandomSerialNumber();
+
+    res = radio_v1_6->setDataThrottling(serial, DataThrottlingAction::THROTTLE_ANCHOR_CARRIER, 60);
+    ASSERT_OK(res);
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
+    ASSERT_TRUE(
+            CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                             {::android::hardware::radio::V1_6::RadioError::RADIO_NOT_AVAILABLE,
+                              ::android::hardware::radio::V1_6::RadioError::MODEM_ERR,
+                              ::android::hardware::radio::V1_6::RadioError::NONE,
+                              ::android::hardware::radio::V1_6::RadioError::INVALID_ARGUMENTS}));
+
+    serial = GetRandomSerialNumber();
+
+    res = radio_v1_6->setDataThrottling(serial, DataThrottlingAction::HOLD, 60);
+    ASSERT_OK(res);
+
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
+    ASSERT_TRUE(
+            CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                             {::android::hardware::radio::V1_6::RadioError::RADIO_NOT_AVAILABLE,
+                              ::android::hardware::radio::V1_6::RadioError::MODEM_ERR,
+                              ::android::hardware::radio::V1_6::RadioError::NONE,
+                              ::android::hardware::radio::V1_6::RadioError::INVALID_ARGUMENTS}));
+
+    serial = GetRandomSerialNumber();
+
+    res = radio_v1_6->setDataThrottling(serial, DataThrottlingAction::NO_DATA_THROTTLING, 60);
+    ASSERT_OK(res);
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
+    ASSERT_TRUE(
+            CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                             {::android::hardware::radio::V1_6::RadioError::RADIO_NOT_AVAILABLE,
+                              ::android::hardware::radio::V1_6::RadioError::MODEM_ERR,
+                              ::android::hardware::radio::V1_6::RadioError::NONE,
+                              ::android::hardware::radio::V1_6::RadioError::INVALID_ARGUMENTS}));
+}
+
+/*
+ * Test IRadio.setSimCardPower_1_6() for the response returned.
+ */
+TEST_P(RadioHidlTest_v1_6, setSimCardPower_1_6) {
+    /* Test setSimCardPower power down */
+    serial = GetRandomSerialNumber();
+    radio_v1_6->setSimCardPower_1_6(serial, CardPowerState::POWER_DOWN);
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
+    ASSERT_TRUE(
+            CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                             {::android::hardware::radio::V1_6::RadioError::NONE,
+                              ::android::hardware::radio::V1_6::RadioError::INVALID_ARGUMENTS,
+                              ::android::hardware::radio::V1_6::RadioError::RADIO_NOT_AVAILABLE}));
+
+    // setSimCardPower_1_6 does not return  until the request is handled, and should not trigger
+    // CardState::ABSENT when turning off power
+    if (radioRsp_v1_6->rspInfo.error == ::android::hardware::radio::V1_6::RadioError::NONE) {
+        /* Wait some time for setting sim power down and then verify it */
+        updateSimCardStatus();
+        EXPECT_EQ(CardState::PRESENT, cardStatus.base.base.base.cardState);
+        // applications should be an empty vector of AppStatus
+        EXPECT_EQ(0, cardStatus.applications.size());
+    }
+
+    /* Test setSimCardPower power up */
+    serial = GetRandomSerialNumber();
+    radio_v1_6->setSimCardPower_1_6(serial, CardPowerState::POWER_UP);
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
+    ASSERT_TRUE(
+            CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                             {::android::hardware::radio::V1_6::RadioError::NONE,
+                              ::android::hardware::radio::V1_6::RadioError::INVALID_ARGUMENTS,
+                              ::android::hardware::radio::V1_6::RadioError::RADIO_NOT_AVAILABLE}));
+
+    // setSimCardPower_1_6 does not return  until the request is handled. Just verify that we still
+    // have CardState::PRESENT after turning the power back on
+    if (radioRsp_v1_6->rspInfo.error == ::android::hardware::radio::V1_6::RadioError::NONE) {
+        updateSimCardStatus();
+        EXPECT_EQ(CardState::PRESENT, cardStatus.base.base.base.cardState);
+    }
+}
diff --git a/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h b/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h
index f061c60..2a442e7 100644
--- a/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h
+++ b/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h
@@ -773,7 +773,7 @@
             const ::android::hardware::radio::V1_6::RadioResponseInfo& info,
             const SendSmsResult& sms);
 
-    Return<void> enableNrDualConnectivityResponse(
+    Return<void> setNrDualConnectivityStateResponse(
             const ::android::hardware::radio::V1_6::RadioResponseInfo& info);
     Return<void> isNrDualConnectivityEnabledResponse(
             const ::android::hardware::radio::V1_6::RadioResponseInfo& info, bool isEnabled);
@@ -784,7 +784,7 @@
     Return<void> releasePduSessionIdResponse(
             const ::android::hardware::radio::V1_6::RadioResponseInfo& info);
 
-    Return<void> beginHandoverResponse(
+    Return<void> startHandoverResponse(
             const ::android::hardware::radio::V1_6::RadioResponseInfo& info);
 
     Return<void> cancelHandoverResponse(
@@ -792,6 +792,20 @@
 
     Return<void> setAllowedNetworkTypeBitmapResponse(
             const ::android::hardware::radio::V1_6::RadioResponseInfo& info);
+
+    Return<void> setDataThrottlingResponse(
+            const ::android::hardware::radio::V1_6::RadioResponseInfo& info);
+
+    Return<void> getSystemSelectionChannelsResponse(
+            const ::android::hardware::radio::V1_6::RadioResponseInfo& info);
+
+    Return<void> getVoiceRegistrationStateResponse_1_6(
+            const ::android::hardware::radio::V1_6::RadioResponseInfo& info,
+            const ::android::hardware::radio::V1_6::RegStateResult& regResponse);
+
+    Return<void> getDataRegistrationStateResponse_1_6(
+            const ::android::hardware::radio::V1_6::RadioResponseInfo& info,
+            const ::android::hardware::radio::V1_6::RegStateResult& regResponse);
 };
 
 /* Callback class for radio indication */
@@ -865,6 +879,10 @@
             RadioIndicationType type,
             const ::android::hardware::radio::V1_2::LinkCapacityEstimate& lce);
 
+    Return<void> currentLinkCapacityEstimate_1_6(
+            RadioIndicationType type,
+            const ::android::hardware::radio::V1_6::LinkCapacityEstimate& lce);
+
     Return<void> currentPhysicalChannelConfigs(
             RadioIndicationType type,
             const ::android::hardware::hidl_vec<
diff --git a/radio/1.6/vts/functional/radio_indication.cpp b/radio/1.6/vts/functional/radio_indication.cpp
index b353c82..afde291 100644
--- a/radio/1.6/vts/functional/radio_indication.cpp
+++ b/radio/1.6/vts/functional/radio_indication.cpp
@@ -124,6 +124,12 @@
     return Void();
 }
 
+Return<void> RadioIndication_v1_6::currentLinkCapacityEstimate_1_6(
+        RadioIndicationType /*type*/,
+        const ::android::hardware::radio::V1_6::LinkCapacityEstimate& /*lce*/) {
+    return Void();
+}
+
 Return<void> RadioIndication_v1_6::currentPhysicalChannelConfigs(
         RadioIndicationType /*type*/,
         const ::android::hardware::hidl_vec<
diff --git a/radio/1.6/vts/functional/radio_response.cpp b/radio/1.6/vts/functional/radio_response.cpp
index dc4f57d..52d3486 100644
--- a/radio/1.6/vts/functional/radio_response.cpp
+++ b/radio/1.6/vts/functional/radio_response.cpp
@@ -1055,7 +1055,7 @@
     parent_v1_6.notify(info.serial);
     return Void();
 }
-Return<void> RadioResponse_v1_6::enableNrDualConnectivityResponse(
+Return<void> RadioResponse_v1_6::setNrDualConnectivityStateResponse(
         const ::android::hardware::radio::V1_6::RadioResponseInfo& info) {
     rspInfo = info;
     parent_v1_6.notify(info.serial);
@@ -1136,7 +1136,7 @@
     return Void();
 }
 
-Return<void> RadioResponse_v1_6::beginHandoverResponse(
+Return<void> RadioResponse_v1_6::startHandoverResponse(
         const ::android::hardware::radio::V1_6::RadioResponseInfo& info) {
     rspInfo = info;
     parent_v1_6.notify(info.serial);
@@ -1156,3 +1156,33 @@
     parent_v1_6.notify(info.serial);
     return Void();
 }
+
+Return<void> RadioResponse_v1_6::setDataThrottlingResponse(
+        const ::android::hardware::radio::V1_6::RadioResponseInfo& info) {
+    rspInfo = info;
+    parent_v1_6.notify(info.serial);
+    return Void();
+}
+
+Return<void> RadioResponse_v1_6::getSystemSelectionChannelsResponse(
+        const ::android::hardware::radio::V1_6::RadioResponseInfo& info) {
+    rspInfo = info;
+    parent_v1_6.notify(info.serial);
+    return Void();
+}
+
+Return<void> RadioResponse_v1_6::getVoiceRegistrationStateResponse_1_6(
+        const ::android::hardware::radio::V1_6::RadioResponseInfo& info,
+        const ::android::hardware::radio::V1_6::RegStateResult& /*regResponse*/) {
+    rspInfo = info;
+    parent_v1_6.notify(info.serial);
+    return Void();
+}
+
+Return<void> RadioResponse_v1_6::getDataRegistrationStateResponse_1_6(
+        const ::android::hardware::radio::V1_6::RadioResponseInfo& info,
+        const ::android::hardware::radio::V1_6::RegStateResult& /*regResponse*/) {
+    rspInfo = info;
+    parent_v1_6.notify(info.serial);
+    return Void();
+}
diff --git a/sensors/2.0/default/SensorsV2_0.h b/sensors/2.0/default/SensorsV2_0.h
index 345835a..8270a35 100644
--- a/sensors/2.0/default/SensorsV2_0.h
+++ b/sensors/2.0/default/SensorsV2_0.h
@@ -28,6 +28,19 @@
 namespace implementation {
 
 struct SensorsV2_0 : public ::android::hardware::sensors::V2_X::implementation::Sensors<ISensors> {
+  Return<void>
+  getSensorsList(V2_0::ISensors::getSensorsList_cb _hidl_cb) override {
+    std::vector<V1_0::SensorInfo> sensors;
+    for (const auto &sensor : mSensors) {
+      sensors.push_back(V2_1::implementation::convertToOldSensorInfo(
+          sensor.second->getSensorInfo()));
+    }
+
+    // Call the HIDL callback with the SensorInfo
+    _hidl_cb(sensors);
+
+    return Void();
+  }
 };
 
 }  // namespace implementation
diff --git a/sensors/2.1/default/SensorsV2_1.h b/sensors/2.1/default/SensorsV2_1.h
index 9f7fe04..c748383 100644
--- a/sensors/2.1/default/SensorsV2_1.h
+++ b/sensors/2.1/default/SensorsV2_1.h
@@ -54,6 +54,23 @@
     // Methods from ::android::hardware::sensors::V2_1::ISensors follow.
     Return<void> getSensorsList_2_1(ISensors::getSensorsList_2_1_cb _hidl_cb) override;
 
+    Return<void>
+    getSensorsList(V2_0::ISensors::getSensorsList_cb _hidl_cb) override {
+      std::vector<V1_0::SensorInfo> sensors;
+      for (const auto &sensor : mSensors) {
+        auto &info = sensor.second->getSensorInfo();
+        if (info.type != SensorType::HINGE_ANGLE) {
+          sensors.push_back(V2_1::implementation::convertToOldSensorInfo(
+              sensor.second->getSensorInfo()));
+        }
+      }
+
+      // Call the HIDL callback with the SensorInfo
+      _hidl_cb(sensors);
+
+      return Void();
+    }
+
     Return<Result> initialize_2_1(
             const ::android::hardware::MQDescriptorSync<V2_1::Event>& eventQueueDescriptor,
             const ::android::hardware::MQDescriptorSync<uint32_t>& wakeLockDescriptor,
@@ -71,4 +88,4 @@
 }  // namespace hardware
 }  // namespace android
 
-#endif  // ANDROID_HARDWARE_SENSORS_V2_1_H
\ No newline at end of file
+#endif // ANDROID_HARDWARE_SENSORS_V2_1_H
diff --git a/sensors/common/default/2.X/Sensor.cpp b/sensors/common/default/2.X/Sensor.cpp
index 1841dff..870980f 100644
--- a/sensors/common/default/2.X/Sensor.cpp
+++ b/sensors/common/default/2.X/Sensor.cpp
@@ -57,11 +57,11 @@
     return mSensorInfo;
 }
 
-void Sensor::batch(int32_t samplingPeriodNs) {
-    if (samplingPeriodNs < mSensorInfo.minDelay * 1000) {
-        samplingPeriodNs = mSensorInfo.minDelay * 1000;
-    } else if (samplingPeriodNs > mSensorInfo.maxDelay * 1000) {
-        samplingPeriodNs = mSensorInfo.maxDelay * 1000;
+void Sensor::batch(int64_t samplingPeriodNs) {
+    if (samplingPeriodNs < mSensorInfo.minDelay * 1000ll) {
+        samplingPeriodNs = mSensorInfo.minDelay * 1000ll;
+    } else if (samplingPeriodNs > mSensorInfo.maxDelay * 1000ll) {
+        samplingPeriodNs = mSensorInfo.maxDelay * 1000ll;
     }
 
     if (mSamplingPeriodNs != samplingPeriodNs) {
@@ -133,6 +133,11 @@
 }
 
 std::vector<Event> Sensor::readEvents() {
+    // For an accelerometer sensor type, default the z-direction
+    // value to -9.8
+    float zValue = (mSensorInfo.type == SensorType::ACCELEROMETER)
+        ? -9.8 : 0.0;
+
     std::vector<Event> events;
     Event event;
     event.sensorHandle = mSensorInfo.sensorHandle;
@@ -140,7 +145,7 @@
     event.timestamp = ::android::elapsedRealtimeNano();
     event.u.vec3.x = 0;
     event.u.vec3.y = 0;
-    event.u.vec3.z = 0;
+    event.u.vec3.z = zValue;
     event.u.vec3.status = SensorStatus::ACCURACY_HIGH;
     events.push_back(event);
     return events;
@@ -330,25 +335,6 @@
     mSensorInfo.flags = static_cast<uint32_t>(SensorFlagBits::ON_CHANGE_MODE);
 };
 
-DeviceTempSensor::DeviceTempSensor(int32_t sensorHandle, ISensorsEventCallback* callback)
-    : OnChangeSensor(callback) {
-    mSensorInfo.sensorHandle = sensorHandle;
-    mSensorInfo.name = "Device Temp Sensor";
-    mSensorInfo.vendor = "Vendor String";
-    mSensorInfo.version = 1;
-    mSensorInfo.type = SensorType::TEMPERATURE;
-    mSensorInfo.typeAsString = "";
-    mSensorInfo.maxRange = 80.0f;
-    mSensorInfo.resolution = 0.01f;
-    mSensorInfo.power = 0.001f;
-    mSensorInfo.minDelay = 40 * 1000;  // microseconds
-    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
-    mSensorInfo.fifoReservedEventCount = 0;
-    mSensorInfo.fifoMaxEventCount = 0;
-    mSensorInfo.requiredPermission = "";
-    mSensorInfo.flags = static_cast<uint32_t>(SensorFlagBits::ON_CHANGE_MODE);
-}
-
 RelativeHumiditySensor::RelativeHumiditySensor(int32_t sensorHandle,
                                                ISensorsEventCallback* callback)
     : OnChangeSensor(callback) {
diff --git a/sensors/common/default/2.X/Sensor.h b/sensors/common/default/2.X/Sensor.h
index 2f8a143..a792797 100644
--- a/sensors/common/default/2.X/Sensor.h
+++ b/sensors/common/default/2.X/Sensor.h
@@ -32,7 +32,7 @@
 namespace V2_X {
 namespace implementation {
 
-static constexpr float kDefaultMaxDelayUs = 10 * 1000 * 1000;
+static constexpr int32_t kDefaultMaxDelayUs = 10 * 1000 * 1000;
 
 class ISensorsEventCallback {
   public:
@@ -54,7 +54,7 @@
     virtual ~Sensor();
 
     const SensorInfo& getSensorInfo() const;
-    void batch(int32_t samplingPeriodNs);
+    void batch(int64_t samplingPeriodNs);
     virtual void activate(bool enable);
     Result flush();
 
@@ -113,11 +113,6 @@
     AmbientTempSensor(int32_t sensorHandle, ISensorsEventCallback* callback);
 };
 
-class DeviceTempSensor : public OnChangeSensor {
-  public:
-    DeviceTempSensor(int32_t sensorHandle, ISensorsEventCallback* callback);
-};
-
 class PressureSensor : public Sensor {
   public:
     PressureSensor(int32_t sensorHandle, ISensorsEventCallback* callback);
diff --git a/sensors/common/default/2.X/Sensors.h b/sensors/common/default/2.X/Sensors.h
index ee8240d..1124425 100644
--- a/sensors/common/default/2.X/Sensors.h
+++ b/sensors/common/default/2.X/Sensors.h
@@ -64,7 +64,6 @@
         AddSensor<AccelSensor>();
         AddSensor<GyroSensor>();
         AddSensor<AmbientTempSensor>();
-        AddSensor<DeviceTempSensor>();
         AddSensor<PressureSensor>();
         AddSensor<MagnetometerSensor>();
         AddSensor<LightSensor>();
@@ -79,19 +78,6 @@
     }
 
     // Methods from ::android::hardware::sensors::V2_0::ISensors follow.
-    Return<void> getSensorsList(V2_0::ISensors::getSensorsList_cb _hidl_cb) override {
-        std::vector<V1_0::SensorInfo> sensors;
-        for (const auto& sensor : mSensors) {
-            sensors.push_back(
-                    V2_1::implementation::convertToOldSensorInfo(sensor.second->getSensorInfo()));
-        }
-
-        // Call the HIDL callback with the SensorInfo
-        _hidl_cb(sensors);
-
-        return Void();
-    }
-
     Return<Result> setOperationMode(OperationMode mode) override {
         for (auto sensor : mSensors) {
             sensor.second->setOperationMode(mode);
diff --git a/sensors/common/default/2.X/multihal/HalProxy.cpp b/sensors/common/default/2.X/multihal/HalProxy.cpp
index 4527c75..650d7dc 100644
--- a/sensors/common/default/2.X/multihal/HalProxy.cpp
+++ b/sensors/common/default/2.X/multihal/HalProxy.cpp
@@ -124,7 +124,9 @@
 Return<void> HalProxy::getSensorsList(ISensorsV2_0::getSensorsList_cb _hidl_cb) {
     std::vector<V1_0::SensorInfo> sensors;
     for (const auto& iter : mSensors) {
+      if (iter.second.type != SensorType::HINGE_ANGLE) {
         sensors.push_back(convertToOldSensorInfo(iter.second));
+      }
     }
     _hidl_cb(sensors);
     return Void();
diff --git a/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.cpp b/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.cpp
index 1efd971..69debb6 100644
--- a/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.cpp
+++ b/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.cpp
@@ -71,9 +71,10 @@
     return mSensorInfo;
 }
 
-void Sensor::batch(int32_t samplingPeriodNs) {
-    samplingPeriodNs =
-            std::clamp(samplingPeriodNs, mSensorInfo.minDelay * 1000, mSensorInfo.maxDelay * 1000);
+void Sensor::batch(int64_t samplingPeriodNs) {
+    samplingPeriodNs = std::clamp(samplingPeriodNs,
+                                  static_cast<int64_t>(mSensorInfo.minDelay) * 1000,
+                                  static_cast<int64_t>(mSensorInfo.maxDelay) * 1000);
 
     if (mSamplingPeriodNs != samplingPeriodNs) {
         mSamplingPeriodNs = samplingPeriodNs;
@@ -323,17 +324,6 @@
     mSensorInfo.minDelay = 40 * 1000;  // microseconds
 }
 
-DeviceTempSensor::DeviceTempSensor(int32_t sensorHandle, ISensorsEventCallback* callback)
-    : ContinuousSensor(sensorHandle, callback) {
-    mSensorInfo.name = "Device Temp Sensor";
-    mSensorInfo.type = SensorType::TEMPERATURE;
-    mSensorInfo.typeAsString = SENSOR_STRING_TYPE_TEMPERATURE;
-    mSensorInfo.maxRange = 80.0f;
-    mSensorInfo.resolution = 0.01f;
-    mSensorInfo.power = 0.001f;
-    mSensorInfo.minDelay = 40 * 1000;  // microseconds
-}
-
 RelativeHumiditySensor::RelativeHumiditySensor(int32_t sensorHandle,
                                                ISensorsEventCallback* callback)
     : OnChangeSensor(sensorHandle, callback) {
diff --git a/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.h b/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.h
index 5cf9f83..08c8647 100644
--- a/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.h
+++ b/sensors/common/default/2.X/multihal/tests/fake_subhal/Sensor.h
@@ -49,7 +49,7 @@
     virtual ~Sensor();
 
     const SensorInfo& getSensorInfo() const;
-    void batch(int32_t samplingPeriodNs);
+    void batch(int64_t samplingPeriodNs);
     virtual void activate(bool enable);
     Result flush();
 
@@ -114,11 +114,6 @@
     std::vector<Event> readEvents() override;
 };
 
-class DeviceTempSensor : public ContinuousSensor {
-  public:
-    DeviceTempSensor(int32_t sensorHandle, ISensorsEventCallback* callback);
-};
-
 class PressureSensor : public ContinuousSensor {
   public:
     PressureSensor(int32_t sensorHandle, ISensorsEventCallback* callback);
diff --git a/sensors/common/default/2.X/multihal/tests/fake_subhal/SensorsSubHal.h b/sensors/common/default/2.X/multihal/tests/fake_subhal/SensorsSubHal.h
index 1a78e84..353563c 100644
--- a/sensors/common/default/2.X/multihal/tests/fake_subhal/SensorsSubHal.h
+++ b/sensors/common/default/2.X/multihal/tests/fake_subhal/SensorsSubHal.h
@@ -206,7 +206,6 @@
         ISensorsSubHalBase::AddSensor<GyroSensor>();
         ISensorsSubHalBase::AddSensor<MagnetometerSensor>();
         ISensorsSubHalBase::AddSensor<PressureSensor>();
-        ISensorsSubHalBase::AddSensor<DeviceTempSensor>();
     }
 };
 
@@ -231,7 +230,6 @@
         ISensorsSubHalBase::AddSensor<GyroSensor>();
         ISensorsSubHalBase::AddSensor<MagnetometerSensor>();
         ISensorsSubHalBase::AddSensor<PressureSensor>();
-        ISensorsSubHalBase::AddSensor<DeviceTempSensor>();
         ISensorsSubHalBase::AddSensor<AmbientTempSensor>();
         ISensorsSubHalBase::AddSensor<LightSensor>();
         ISensorsSubHalBase::AddSensor<ProximitySensor>();
diff --git a/sensors/common/vts/2_X/VtsHalSensorsV2_XTargetTest.h b/sensors/common/vts/2_X/VtsHalSensorsV2_XTargetTest.h
index e674ddb..8cf5003 100644
--- a/sensors/common/vts/2_X/VtsHalSensorsV2_XTargetTest.h
+++ b/sensors/common/vts/2_X/VtsHalSensorsV2_XTargetTest.h
@@ -366,7 +366,7 @@
     for (const SensorInfoType& sensor : getSensorsList()) {
         maxHandle = std::max(maxHandle, sensor.sensorHandle);
     }
-    return maxHandle + 1;
+    return maxHandle + 42;
 }
 
 // Test if sensor list returned is valid
@@ -845,7 +845,11 @@
         std::shared_ptr<SensorsTestSharedMemory<SensorTypeVersion, EventType>> mem,
         int32_t* directChannelHandle, bool supportsSharedMemType, bool supportsAnyDirectChannel) {
     char* buffer = mem->getBuffer();
-    memset(buffer, 0xff, mem->getSize());
+    size_t size = mem->getSize();
+
+    if (supportsSharedMemType) {
+        memset(buffer, 0xff, size);
+    }
 
     registerDirectChannel(mem->getSharedMemInfo(), [&](Result result, int32_t channelHandle) {
         if (supportsSharedMemType) {
diff --git a/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h b/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h
index 03bec87..a8e1996 100644
--- a/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h
+++ b/sensors/common/vts/utils/include/sensors-vts-utils/SensorsHidlTestBase.h
@@ -109,7 +109,6 @@
         case SensorTypeT::MAGNETIC_FIELD:
         case SensorTypeT::ORIENTATION:
         case SensorTypeT::PRESSURE:
-        case SensorTypeT::TEMPERATURE:
         case SensorTypeT::GRAVITY:
         case SensorTypeT::LINEAR_ACCELERATION:
         case SensorTypeT::ROTATION_VECTOR:
@@ -145,6 +144,10 @@
         case SensorTypeT::DYNAMIC_SENSOR_META:
             return SensorFlagBits::SPECIAL_REPORTING_MODE;
 
+        case SensorTypeT::TEMPERATURE:
+            ALOGW("Device temperature sensor is deprecated, ignoring for test");
+            return (SensorFlagBits)-1;
+
         default:
             ALOGW("Type %d is not implemented in expectedReportModeForType", (int)type);
             return (SensorFlagBits)-1;
@@ -334,7 +337,7 @@
         usleep(500000);  // sleep 0.5 sec to wait for change rate to happen
         events1 = collectEvents(collectionTimeoutUs, minNEvent, getEnvironment());
 
-        // second collection, without stop sensor
+        // second collection, without stopping the sensor
         ASSERT_EQ(batch(handle, secondCollectionPeriod, batchingPeriodInNs), Result::OK);
 
         usleep(500000);  // sleep 0.5 sec to wait for change rate to happen
diff --git a/tests/foo/1.0/IFoo.hal b/tests/foo/1.0/IFoo.hal
index 4c54427..e242616 100644
--- a/tests/foo/1.0/IFoo.hal
+++ b/tests/foo/1.0/IFoo.hal
@@ -21,6 +21,7 @@
 import ISimple;
 import ITheirTypes.FloatArray;
 
+@SensitiveData // for test
 interface IFoo {
 
     enum SomeBaseEnum : uint8_t {
diff --git a/tetheroffload/control/1.0/vts/functional/Android.bp b/tetheroffload/control/1.0/vts/functional/Android.bp
index c51dd8b..c397df4 100644
--- a/tetheroffload/control/1.0/vts/functional/Android.bp
+++ b/tetheroffload/control/1.0/vts/functional/Android.bp
@@ -15,10 +15,18 @@
 cc_test {
     name: "VtsHalTetheroffloadControlV1_0TargetTest",
     defaults: ["VtsHalTargetTestDefaults"],
-    srcs: ["VtsHalTetheroffloadControlV1_0TargetTest.cpp"],
+    local_include_dirs: ["include"],
+    srcs: [
+        "VtsHalTetheroffloadControlV1_0TargetTest.cpp",
+        "OffloadControlTestBase.cpp",
+        "OffloadControlTestUtils.cpp",
+    ],
     static_libs: [
         "android.hardware.tetheroffload.config@1.0",
         "android.hardware.tetheroffload.control@1.0",
     ],
-    test_suites: ["general-tests", "vts"],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
 }
diff --git a/tetheroffload/control/1.0/vts/functional/OffloadControlTestBase.cpp b/tetheroffload/control/1.0/vts/functional/OffloadControlTestBase.cpp
new file mode 100644
index 0000000..bd0dad7
--- /dev/null
+++ b/tetheroffload/control/1.0/vts/functional/OffloadControlTestBase.cpp
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <OffloadControlTestBase.h>
+
+void OffloadControlTestBase::TearDown() {
+    // For good measure, the teardown should try stopOffload() once more, since
+    // different HAL call test cycles might enter this function. Also the
+    // return code cannot be actually expected for all cases, hence ignore it.
+    stopOffload(ExpectBoolean::Ignored);
+}
+
+// The IOffloadConfig HAL is tested more thoroughly elsewhere. Here the class
+// just setup everything correctly and verify basic readiness.
+void OffloadControlTestBase::setupConfigHal() {
+    config = IOffloadConfig::getService(std::get<0>(GetParam()));
+    ASSERT_NE(nullptr, config.get()) << "Could not get HIDL instance";
+
+    unique_fd fd1(conntrackSocket(NF_NETLINK_CONNTRACK_NEW | NF_NETLINK_CONNTRACK_DESTROY));
+    if (fd1.get() < 0) {
+        ALOGE("Unable to create conntrack handles: %d/%s", errno, strerror(errno));
+        FAIL();
+    }
+    native_handle_t* const nativeHandle1 = native_handle_create(1, 0);
+    nativeHandle1->data[0] = fd1.release();
+    hidl_handle h1;
+    h1.setTo(nativeHandle1, true);
+
+    unique_fd fd2(conntrackSocket(NF_NETLINK_CONNTRACK_UPDATE | NF_NETLINK_CONNTRACK_DESTROY));
+    if (fd2.get() < 0) {
+        ALOGE("Unable to create conntrack handles: %d/%s", errno, strerror(errno));
+        FAIL();
+    }
+    native_handle_t* const nativeHandle2 = native_handle_create(1, 0);
+    nativeHandle2->data[0] = fd2.release();
+    hidl_handle h2;
+    h2.setTo(nativeHandle2, true);
+
+    const Return<void> ret = config->setHandles(h1, h2, ASSERT_TRUE_CALLBACK);
+    ASSERT_TRUE(ret.isOk());
+}
+
+void OffloadControlTestBase::prepareControlHal() {
+    control = createControl(std::get<1>(GetParam()));
+    ASSERT_NE(nullptr, control.get()) << "Could not get HIDL instance";
+
+    control_cb = new TetheringOffloadCallback();
+    ASSERT_NE(nullptr, control_cb.get()) << "Could not get get offload callback";
+}
+
+void OffloadControlTestBase::initOffload(const bool expected_result) {
+    auto init_cb = [&](bool success, std::string errMsg) {
+        std::string msg = StringPrintf("Unexpectedly %s to init offload: %s",
+                                       success ? "succeeded" : "failed", errMsg.c_str());
+        ASSERT_EQ(expected_result, success) << msg;
+    };
+    const Return<void> ret = control->initOffload(control_cb, init_cb);
+    ASSERT_TRUE(ret.isOk());
+}
+
+void OffloadControlTestBase::setupControlHal() {
+    prepareControlHal();
+    initOffload(true);
+}
+
+void OffloadControlTestBase::stopOffload(const ExpectBoolean value) {
+    auto cb = [&](bool success, const hidl_string& errMsg) {
+        switch (value) {
+            case ExpectBoolean::False:
+                ASSERT_EQ(false, success) << "Unexpectedly able to stop offload: " << errMsg;
+                break;
+            case ExpectBoolean::True:
+                ASSERT_EQ(true, success) << "Unexpectedly failed to stop offload: " << errMsg;
+                break;
+            case ExpectBoolean::Ignored:
+                break;
+        }
+    };
+    const Return<void> ret = control->stopOffload(cb);
+    ASSERT_TRUE(ret.isOk());
+}
diff --git a/tetheroffload/control/1.0/vts/functional/OffloadControlTestUtils.cpp b/tetheroffload/control/1.0/vts/functional/OffloadControlTestUtils.cpp
new file mode 100644
index 0000000..c784fe1
--- /dev/null
+++ b/tetheroffload/control/1.0/vts/functional/OffloadControlTestUtils.cpp
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <OffloadControlTestUtils.h>
+#include <android-base/unique_fd.h>
+
+using android::base::unique_fd;
+
+inline const sockaddr* asSockaddr(const sockaddr_nl* nladdr) {
+    return reinterpret_cast<const sockaddr*>(nladdr);
+}
+
+int conntrackSocket(unsigned groups) {
+    unique_fd s(socket(AF_NETLINK, SOCK_DGRAM, NETLINK_NETFILTER));
+    if (s.get() < 0) {
+        return -errno;
+    }
+
+    const struct sockaddr_nl bind_addr = {
+            .nl_family = AF_NETLINK,
+            .nl_pad = 0,
+            .nl_pid = 0,
+            .nl_groups = groups,
+    };
+    if (::bind(s.get(), asSockaddr(&bind_addr), sizeof(bind_addr)) < 0) {
+        return -errno;
+    }
+
+    const struct sockaddr_nl kernel_addr = {
+            .nl_family = AF_NETLINK,
+            .nl_pad = 0,
+            .nl_pid = 0,
+            .nl_groups = groups,
+    };
+    if (connect(s.get(), asSockaddr(&kernel_addr), sizeof(kernel_addr)) != 0) {
+        return -errno;
+    }
+
+    return s.release();
+}
\ No newline at end of file
diff --git a/tetheroffload/control/1.0/vts/functional/VtsHalTetheroffloadControlV1_0TargetTest.cpp b/tetheroffload/control/1.0/vts/functional/VtsHalTetheroffloadControlV1_0TargetTest.cpp
index d3a7020..ad4ef12 100644
--- a/tetheroffload/control/1.0/vts/functional/VtsHalTetheroffloadControlV1_0TargetTest.cpp
+++ b/tetheroffload/control/1.0/vts/functional/VtsHalTetheroffloadControlV1_0TargetTest.cpp
@@ -16,215 +16,24 @@
 
 #define LOG_TAG "VtsOffloadControlV1_0TargetTest"
 
-#include <VtsHalHidlTargetCallbackBase.h>
+#include <OffloadControlTestV1_0.h>
 #include <android-base/stringprintf.h>
-#include <android-base/unique_fd.h>
-#include <android/hardware/tetheroffload/config/1.0/IOffloadConfig.h>
-#include <android/hardware/tetheroffload/control/1.0/IOffloadControl.h>
-#include <android/hardware/tetheroffload/control/1.0/types.h>
 #include <gtest/gtest.h>
 #include <hidl/GtestPrinter.h>
 #include <hidl/ServiceManagement.h>
-#include <linux/netfilter/nfnetlink.h>
-#include <linux/netlink.h>
-#include <log/log.h>
 #include <net/if.h>
 #include <sys/socket.h>
-#include <unistd.h>
-#include <set>
 
 using android::base::StringPrintf;
-using android::base::unique_fd;
-using android::hardware::hidl_handle;
-using android::hardware::hidl_string;
-using android::hardware::hidl_vec;
 using android::hardware::Return;
 using android::hardware::tetheroffload::config::V1_0::IOffloadConfig;
 using android::hardware::tetheroffload::control::V1_0::IOffloadControl;
-using android::hardware::tetheroffload::control::V1_0::IPv4AddrPortPair;
-using android::hardware::tetheroffload::control::V1_0::ITetheringOffloadCallback;
-using android::hardware::tetheroffload::control::V1_0::OffloadCallbackEvent;
-using android::hardware::tetheroffload::control::V1_0::NatTimeoutUpdate;
-using android::hardware::tetheroffload::control::V1_0::NetworkProtocol;
 using android::hardware::Void;
-using android::sp;
-
-enum class ExpectBoolean {
-    Ignored = -1,
-    False = 0,
-    True = 1,
-};
 
 constexpr const char* TEST_IFACE = "rmnet_data0";
 
-// We use #defines here so as to get local lamba captures and error message line numbers
-#define ASSERT_TRUE_CALLBACK                                                    \
-    [&](bool success, std::string errMsg) {                                     \
-        std::string msg = StringPrintf("unexpected error: %s", errMsg.c_str()); \
-        ASSERT_TRUE(success) << msg;                                            \
-    }
-
-#define ASSERT_FALSE_CALLBACK                                                 \
-    [&](bool success, std::string errMsg) {                                   \
-        std::string msg = StringPrintf("expected error: %s", errMsg.c_str()); \
-        ASSERT_FALSE(success) << msg;                                         \
-    }
-
-#define ASSERT_ZERO_BYTES_CALLBACK            \
-    [&](uint64_t rxBytes, uint64_t txBytes) { \
-        EXPECT_EQ(0ULL, rxBytes);             \
-        EXPECT_EQ(0ULL, txBytes);             \
-    }
-
-inline const sockaddr* asSockaddr(const sockaddr_nl* nladdr) {
-    return reinterpret_cast<const sockaddr*>(nladdr);
-}
-
-int conntrackSocket(unsigned groups) {
-    unique_fd s(socket(AF_NETLINK, SOCK_DGRAM, NETLINK_NETFILTER));
-    if (s.get() < 0) {
-        return -errno;
-    }
-
-    const struct sockaddr_nl bind_addr = {
-        .nl_family = AF_NETLINK, .nl_pad = 0, .nl_pid = 0, .nl_groups = groups,
-    };
-    if (::bind(s.get(), asSockaddr(&bind_addr), sizeof(bind_addr)) < 0) {
-        return -errno;
-    }
-
-    const struct sockaddr_nl kernel_addr = {
-        .nl_family = AF_NETLINK, .nl_pad = 0, .nl_pid = 0, .nl_groups = groups,
-    };
-    if (connect(s.get(), asSockaddr(&kernel_addr), sizeof(kernel_addr)) != 0) {
-        return -errno;
-    }
-
-    return s.release();
-}
-
-constexpr char kCallbackOnEvent[] = "onEvent";
-constexpr char kCallbackUpdateTimeout[] = "updateTimeout";
-
-class TetheringOffloadCallbackArgs {
-   public:
-    OffloadCallbackEvent last_event;
-    NatTimeoutUpdate last_params;
-};
-
-class OffloadControlHidlTestBase
-    : public testing::TestWithParam<std::tuple<std::string, std::string>> {
-   public:
-    virtual void SetUp() override {
-        setupConfigHal();
-        prepareControlHal();
-    }
-
-    virtual void TearDown() override {
-        // For good measure, we should try stopOffload() once more. Since we
-        // don't know where we are in HAL call test cycle we don't know what
-        // return code to actually expect, so we just ignore it.
-        stopOffload(ExpectBoolean::Ignored);
-    }
-
-    // The IOffloadConfig HAL is tested more thoroughly elsewhere. He we just
-    // setup everything correctly and verify basic readiness.
-    void setupConfigHal() {
-        config = IOffloadConfig::getService(std::get<0>(GetParam()));
-        ASSERT_NE(nullptr, config.get()) << "Could not get HIDL instance";
-
-        unique_fd fd1(conntrackSocket(NF_NETLINK_CONNTRACK_NEW | NF_NETLINK_CONNTRACK_DESTROY));
-        if (fd1.get() < 0) {
-            ALOGE("Unable to create conntrack handles: %d/%s", errno, strerror(errno));
-            FAIL();
-        }
-        native_handle_t* const nativeHandle1 = native_handle_create(1, 0);
-        nativeHandle1->data[0] = fd1.release();
-        hidl_handle h1;
-        h1.setTo(nativeHandle1, true);
-
-        unique_fd fd2(conntrackSocket(NF_NETLINK_CONNTRACK_UPDATE | NF_NETLINK_CONNTRACK_DESTROY));
-        if (fd2.get() < 0) {
-            ALOGE("Unable to create conntrack handles: %d/%s", errno, strerror(errno));
-            FAIL();
-        }
-        native_handle_t* const nativeHandle2 = native_handle_create(1, 0);
-        nativeHandle2->data[0] = fd2.release();
-        hidl_handle h2;
-        h2.setTo(nativeHandle2, true);
-
-        const Return<void> ret = config->setHandles(h1, h2, ASSERT_TRUE_CALLBACK);
-        ASSERT_TRUE(ret.isOk());
-    }
-
-    void prepareControlHal() {
-        control = IOffloadControl::getService(std::get<1>(GetParam()));
-        ASSERT_NE(nullptr, control.get()) << "Could not get HIDL instance";
-
-        control_cb = new TetheringOffloadCallback();
-        ASSERT_NE(nullptr, control_cb.get()) << "Could not get get offload callback";
-    }
-
-    void initOffload(const bool expected_result) {
-        auto init_cb = [&](bool success, std::string errMsg) {
-            std::string msg = StringPrintf("Unexpectedly %s to init offload: %s",
-                                           success ? "succeeded" : "failed", errMsg.c_str());
-            ASSERT_EQ(expected_result, success) << msg;
-        };
-        const Return<void> ret = control->initOffload(control_cb, init_cb);
-        ASSERT_TRUE(ret.isOk());
-    }
-
-    void setupControlHal() {
-        prepareControlHal();
-        initOffload(true);
-    }
-
-    void stopOffload(const ExpectBoolean value) {
-        auto cb = [&](bool success, const hidl_string& errMsg) {
-            switch (value) {
-                case ExpectBoolean::False:
-                    ASSERT_EQ(false, success) << "Unexpectedly able to stop offload: " << errMsg;
-                    break;
-                case ExpectBoolean::True:
-                    ASSERT_EQ(true, success) << "Unexpectedly failed to stop offload: " << errMsg;
-                    break;
-                case ExpectBoolean::Ignored:
-                    break;
-            }
-        };
-        const Return<void> ret = control->stopOffload(cb);
-        ASSERT_TRUE(ret.isOk());
-    }
-
-    // Callback class for both events and NAT timeout updates.
-    class TetheringOffloadCallback
-        : public testing::VtsHalHidlTargetCallbackBase<TetheringOffloadCallbackArgs>,
-          public ITetheringOffloadCallback {
-       public:
-        TetheringOffloadCallback() = default;
-        virtual ~TetheringOffloadCallback() = default;
-
-        Return<void> onEvent(OffloadCallbackEvent event) override {
-            const TetheringOffloadCallbackArgs args{.last_event = event};
-            NotifyFromCallback(kCallbackOnEvent, args);
-            return Void();
-        };
-
-        Return<void> updateTimeout(const NatTimeoutUpdate& params) override {
-            const TetheringOffloadCallbackArgs args{.last_params = params};
-            NotifyFromCallback(kCallbackUpdateTimeout, args);
-            return Void();
-        };
-    };
-
-    sp<IOffloadConfig> config;
-    sp<IOffloadControl> control;
-    sp<TetheringOffloadCallback> control_cb;
-};
-
 // Call initOffload() multiple times. Check that non-first initOffload() calls return false.
-TEST_P(OffloadControlHidlTestBase, AdditionalInitsWithoutStopReturnFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, AdditionalInitsWithoutStopReturnFalse) {
     initOffload(true);
     initOffload(false);
     initOffload(false);
@@ -232,7 +41,7 @@
 }
 
 // Check that calling stopOffload() without first having called initOffload() returns false.
-TEST_P(OffloadControlHidlTestBase, MultipleStopsWithoutInitReturnFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, MultipleStopsWithoutInitReturnFalse) {
     stopOffload(ExpectBoolean::False);
     stopOffload(ExpectBoolean::False);
     stopOffload(ExpectBoolean::False);
@@ -251,7 +60,7 @@
 }
 
 // Check that calling stopOffload() after a complete init/stop cycle returns false.
-TEST_P(OffloadControlHidlTestBase, AdditionalStopsWithInitReturnFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, AdditionalStopsWithInitReturnFalse) {
     initOffload(true);
     // Call setUpstreamParameters() so that "offload" can be reasonably said
     // to be both requested and operational.
@@ -273,7 +82,7 @@
 }
 
 // Check that calling setLocalPrefixes() without first having called initOffload() returns false.
-TEST_P(OffloadControlHidlTestBase, SetLocalPrefixesWithoutInitReturnsFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, SetLocalPrefixesWithoutInitReturnsFalse) {
     const vector<hidl_string> prefixes{hidl_string("2001:db8::/64")};
     const Return<void> ret = control->setLocalPrefixes(prefixes, ASSERT_FALSE_CALLBACK);
     EXPECT_TRUE(ret.isOk());
@@ -281,14 +90,14 @@
 
 // Check that calling getForwardedStats() without first having called initOffload()
 // returns zero bytes statistics.
-TEST_P(OffloadControlHidlTestBase, GetForwardedStatsWithoutInitReturnsZeroValues) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, GetForwardedStatsWithoutInitReturnsZeroValues) {
     const hidl_string upstream(TEST_IFACE);
     const Return<void> ret = control->getForwardedStats(upstream, ASSERT_ZERO_BYTES_CALLBACK);
     EXPECT_TRUE(ret.isOk());
 }
 
 // Check that calling setDataLimit() without first having called initOffload() returns false.
-TEST_P(OffloadControlHidlTestBase, SetDataLimitWithoutInitReturnsFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, SetDataLimitWithoutInitReturnsFalse) {
     const hidl_string upstream(TEST_IFACE);
     const uint64_t limit = 5000ULL;
     const Return<void> ret = control->setDataLimit(upstream, limit, ASSERT_FALSE_CALLBACK);
@@ -297,7 +106,7 @@
 
 // Check that calling setUpstreamParameters() without first having called initOffload()
 // returns false.
-TEST_P(OffloadControlHidlTestBase, SetUpstreamParametersWithoutInitReturnsFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, SetUpstreamParametersWithoutInitReturnsFalse) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Addr("192.0.2.0/24");
     const hidl_string v4Gw("192.0.2.1");
@@ -309,7 +118,7 @@
 
 // Check that calling addDownstream() with an IPv4 prefix without first having called
 // initOffload() returns false.
-TEST_P(OffloadControlHidlTestBase, AddIPv4DownstreamWithoutInitReturnsFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, AddIPv4DownstreamWithoutInitReturnsFalse) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string prefix("192.0.2.0/24");
     const Return<void> ret = control->addDownstream(iface, prefix, ASSERT_FALSE_CALLBACK);
@@ -318,7 +127,7 @@
 
 // Check that calling addDownstream() with an IPv6 prefix without first having called
 // initOffload() returns false.
-TEST_P(OffloadControlHidlTestBase, AddIPv6DownstreamWithoutInitReturnsFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, AddIPv6DownstreamWithoutInitReturnsFalse) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string prefix("2001:db8::/64");
     const Return<void> ret = control->addDownstream(iface, prefix, ASSERT_FALSE_CALLBACK);
@@ -327,7 +136,7 @@
 
 // Check that calling removeDownstream() with an IPv4 prefix without first having called
 // initOffload() returns false.
-TEST_P(OffloadControlHidlTestBase, RemoveIPv4DownstreamWithoutInitReturnsFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, RemoveIPv4DownstreamWithoutInitReturnsFalse) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string prefix("192.0.2.0/24");
     const Return<void> ret = control->removeDownstream(iface, prefix, ASSERT_FALSE_CALLBACK);
@@ -336,48 +145,33 @@
 
 // Check that calling removeDownstream() with an IPv6 prefix without first having called
 // initOffload() returns false.
-TEST_P(OffloadControlHidlTestBase, RemoveIPv6DownstreamWithoutInitReturnsFalse) {
+TEST_P(OffloadControlTestV1_0_HalNotStarted, RemoveIPv6DownstreamWithoutInitReturnsFalse) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string prefix("2001:db8::/64");
     const Return<void> ret = control->removeDownstream(iface, prefix, ASSERT_FALSE_CALLBACK);
     EXPECT_TRUE(ret.isOk());
 }
 
-class OffloadControlHidlTest : public OffloadControlHidlTestBase {
-   public:
-    virtual void SetUp() override {
-        setupConfigHal();
-        setupControlHal();
-    }
-
-    virtual void TearDown() override {
-        // For good measure, we should try stopOffload() once more. Since we
-        // don't know where we are in HAL call test cycle we don't know what
-        // return code to actually expect, so we just ignore it.
-        stopOffload(ExpectBoolean::Ignored);
-    }
-};
-
 /*
  * Tests for IOffloadControl::setLocalPrefixes().
  */
 
 // Test setLocalPrefixes() accepts an IPv4 address.
-TEST_P(OffloadControlHidlTest, SetLocalPrefixesIPv4AddressOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetLocalPrefixesIPv4AddressOk) {
     const vector<hidl_string> prefixes{hidl_string("192.0.2.1")};
     const Return<void> ret = control->setLocalPrefixes(prefixes, ASSERT_TRUE_CALLBACK);
     EXPECT_TRUE(ret.isOk());
 }
 
 // Test setLocalPrefixes() accepts an IPv6 address.
-TEST_P(OffloadControlHidlTest, SetLocalPrefixesIPv6AddressOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetLocalPrefixesIPv6AddressOk) {
     const vector<hidl_string> prefixes{hidl_string("fe80::1")};
     const Return<void> ret = control->setLocalPrefixes(prefixes, ASSERT_TRUE_CALLBACK);
     EXPECT_TRUE(ret.isOk());
 }
 
 // Test setLocalPrefixes() accepts both IPv4 and IPv6 prefixes.
-TEST_P(OffloadControlHidlTest, SetLocalPrefixesIPv4v6PrefixesOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetLocalPrefixesIPv4v6PrefixesOk) {
     const vector<hidl_string> prefixes{hidl_string("192.0.2.0/24"), hidl_string("fe80::/64")};
     const Return<void> ret = control->setLocalPrefixes(prefixes, ASSERT_TRUE_CALLBACK);
     EXPECT_TRUE(ret.isOk());
@@ -386,14 +180,14 @@
 // Test that setLocalPrefixes() fails given empty input. There is always
 // a non-empty set of local prefixes; when all networking interfaces are down
 // we still apply {127.0.0.0/8, ::1/128, fe80::/64} here.
-TEST_P(OffloadControlHidlTest, SetLocalPrefixesEmptyFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetLocalPrefixesEmptyFails) {
     const vector<hidl_string> prefixes{};
     const Return<void> ret = control->setLocalPrefixes(prefixes, ASSERT_FALSE_CALLBACK);
     EXPECT_TRUE(ret.isOk());
 }
 
 // Test setLocalPrefixes() fails on incorrectly formed input strings.
-TEST_P(OffloadControlHidlTest, SetLocalPrefixesInvalidFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetLocalPrefixesInvalidFails) {
     const vector<hidl_string> prefixes{hidl_string("192.0.2.0/24"), hidl_string("invalid")};
     const Return<void> ret = control->setLocalPrefixes(prefixes, ASSERT_FALSE_CALLBACK);
     EXPECT_TRUE(ret.isOk());
@@ -404,7 +198,7 @@
  */
 
 // Test that getForwardedStats() for a non-existent upstream yields zero bytes statistics.
-TEST_P(OffloadControlHidlTest, GetForwardedStatsInvalidUpstreamIface) {
+TEST_P(OffloadControlTestV1_0_HalStarted, GetForwardedStatsInvalidUpstreamIface) {
     const hidl_string upstream("invalid");
     const Return<void> ret = control->getForwardedStats(upstream, ASSERT_ZERO_BYTES_CALLBACK);
     EXPECT_TRUE(ret.isOk());
@@ -412,7 +206,7 @@
 
 // TEST_IFACE is presumed to exist on the device and be up. No packets
 // are ever actually caused to be forwarded.
-TEST_P(OffloadControlHidlTest, GetForwardedStatsDummyIface) {
+TEST_P(OffloadControlTestV1_0_HalStarted, GetForwardedStatsDummyIface) {
     const hidl_string upstream(TEST_IFACE);
     const Return<void> ret = control->getForwardedStats(upstream, ASSERT_ZERO_BYTES_CALLBACK);
     EXPECT_TRUE(ret.isOk());
@@ -423,7 +217,7 @@
  */
 
 // Test that setDataLimit() for an empty interface name fails.
-TEST_P(OffloadControlHidlTest, SetDataLimitEmptyUpstreamIfaceFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetDataLimitEmptyUpstreamIfaceFails) {
     const hidl_string upstream("");
     const uint64_t limit = 5000ULL;
     const Return<void> ret = control->setDataLimit(upstream, limit, ASSERT_FALSE_CALLBACK);
@@ -432,7 +226,7 @@
 
 // TEST_IFACE is presumed to exist on the device and be up. No packets
 // are ever actually caused to be forwarded.
-TEST_P(OffloadControlHidlTest, SetDataLimitNonZeroOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetDataLimitNonZeroOk) {
     const hidl_string upstream(TEST_IFACE);
     const uint64_t limit = 5000ULL;
     const Return<void> ret = control->setDataLimit(upstream, limit, ASSERT_TRUE_CALLBACK);
@@ -441,7 +235,7 @@
 
 // TEST_IFACE is presumed to exist on the device and be up. No packets
 // are ever actually caused to be forwarded.
-TEST_P(OffloadControlHidlTest, SetDataLimitZeroOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetDataLimitZeroOk) {
     const hidl_string upstream(TEST_IFACE);
     const uint64_t limit = 0ULL;
     const Return<void> ret = control->setDataLimit(upstream, limit, ASSERT_TRUE_CALLBACK);
@@ -454,7 +248,7 @@
 
 // TEST_IFACE is presumed to exist on the device and be up. No packets
 // are ever actually caused to be forwarded.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersIPv6OnlyOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersIPv6OnlyOk) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Addr("");
     const hidl_string v4Gw("");
@@ -466,7 +260,7 @@
 
 // TEST_IFACE is presumed to exist on the device and be up. No packets
 // are ever actually caused to be forwarded.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersAlternateIPv6OnlyOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersAlternateIPv6OnlyOk) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Addr;
     const hidl_string v4Gw;
@@ -478,7 +272,7 @@
 
 // TEST_IFACE is presumed to exist on the device and be up. No packets
 // are ever actually caused to be forwarded.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersIPv4OnlyOk) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersIPv4OnlyOk) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Addr("192.0.2.2");
     const hidl_string v4Gw("192.0.2.1");
@@ -490,7 +284,7 @@
 
 // TEST_IFACE is presumed to exist on the device and be up. No packets
 // are ever actually caused to be forwarded.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersIPv4v6Ok) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersIPv4v6Ok) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Addr("192.0.2.2");
     const hidl_string v4Gw("192.0.2.1");
@@ -501,7 +295,7 @@
 }
 
 // Test that setUpstreamParameters() fails when all parameters are empty.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersEmptyFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersEmptyFails) {
     const hidl_string iface("");
     const hidl_string v4Addr("");
     const hidl_string v4Gw("");
@@ -512,7 +306,7 @@
 }
 
 // Test that setUpstreamParameters() fails when given empty or non-existent interface names.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersBogusIfaceFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersBogusIfaceFails) {
     const hidl_string v4Addr("192.0.2.2");
     const hidl_string v4Gw("192.0.2.1");
     const vector<hidl_string> v6Gws{hidl_string("fe80::db8:1")};
@@ -526,7 +320,7 @@
 }
 
 // Test that setUpstreamParameters() fails when given unparseable IPv4 addresses.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersInvalidIPv4AddrFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersInvalidIPv4AddrFails) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Gw("192.0.2.1");
     const vector<hidl_string> v6Gws{hidl_string("fe80::db8:1")};
@@ -540,7 +334,7 @@
 }
 
 // Test that setUpstreamParameters() fails when given unparseable IPv4 gateways.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersInvalidIPv4GatewayFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersInvalidIPv4GatewayFails) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Addr("192.0.2.2");
     const vector<hidl_string> v6Gws{hidl_string("fe80::db8:1")};
@@ -554,7 +348,7 @@
 }
 
 // Test that setUpstreamParameters() fails when given unparseable IPv6 gateways.
-TEST_P(OffloadControlHidlTest, SetUpstreamParametersBadIPv6GatewaysFail) {
+TEST_P(OffloadControlTestV1_0_HalStarted, SetUpstreamParametersBadIPv6GatewaysFail) {
     const hidl_string iface(TEST_IFACE);
     const hidl_string v4Addr("192.0.2.2");
     const hidl_string v4Gw("192.0.2.1");
@@ -572,7 +366,7 @@
  */
 
 // Test addDownstream() works given an IPv4 prefix.
-TEST_P(OffloadControlHidlTest, AddDownstreamIPv4) {
+TEST_P(OffloadControlTestV1_0_HalStarted, AddDownstreamIPv4) {
     const hidl_string iface("dummy0");
     const hidl_string prefix("192.0.2.0/24");
     const Return<void> ret = control->addDownstream(iface, prefix, ASSERT_TRUE_CALLBACK);
@@ -580,7 +374,7 @@
 }
 
 // Test addDownstream() works given an IPv6 prefix.
-TEST_P(OffloadControlHidlTest, AddDownstreamIPv6) {
+TEST_P(OffloadControlTestV1_0_HalStarted, AddDownstreamIPv6) {
     const hidl_string iface("dummy0");
     const hidl_string prefix("2001:db8::/64");
     const Return<void> ret = control->addDownstream(iface, prefix, ASSERT_TRUE_CALLBACK);
@@ -588,7 +382,7 @@
 }
 
 // Test addDownstream() fails given all empty parameters.
-TEST_P(OffloadControlHidlTest, AddDownstreamEmptyFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, AddDownstreamEmptyFails) {
     const hidl_string iface("");
     const hidl_string prefix("");
     const Return<void> ret = control->addDownstream(iface, prefix, ASSERT_FALSE_CALLBACK);
@@ -596,7 +390,7 @@
 }
 
 // Test addDownstream() fails given empty or non-existent interface names.
-TEST_P(OffloadControlHidlTest, AddDownstreamInvalidIfaceFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, AddDownstreamInvalidIfaceFails) {
     const hidl_string prefix("192.0.2.0/24");
     for (const auto& bogus : {"", "invalid"}) {
         SCOPED_TRACE(StringPrintf("iface='%s'", bogus));
@@ -607,7 +401,7 @@
 }
 
 // Test addDownstream() fails given unparseable prefix arguments.
-TEST_P(OffloadControlHidlTest, AddDownstreamBogusPrefixFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, AddDownstreamBogusPrefixFails) {
     const hidl_string iface("dummy0");
     for (const auto& bogus : {"", "192.0.2/24", "2001:db8/64"}) {
         SCOPED_TRACE(StringPrintf("prefix='%s'", bogus));
@@ -622,7 +416,7 @@
  */
 
 // Test removeDownstream() works given an IPv4 prefix.
-TEST_P(OffloadControlHidlTest, RemoveDownstreamIPv4) {
+TEST_P(OffloadControlTestV1_0_HalStarted, RemoveDownstreamIPv4) {
     const hidl_string iface("dummy0");
     const hidl_string prefix("192.0.2.0/24");
     // First add the downstream, otherwise removeDownstream logic can reasonably
@@ -634,7 +428,7 @@
 }
 
 // Test removeDownstream() works given an IPv6 prefix.
-TEST_P(OffloadControlHidlTest, RemoveDownstreamIPv6) {
+TEST_P(OffloadControlTestV1_0_HalStarted, RemoveDownstreamIPv6) {
     const hidl_string iface("dummy0");
     const hidl_string prefix("2001:db8::/64");
     // First add the downstream, otherwise removeDownstream logic can reasonably
@@ -646,7 +440,7 @@
 }
 
 // Test removeDownstream() fails given all empty parameters.
-TEST_P(OffloadControlHidlTest, RemoveDownstreamEmptyFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, RemoveDownstreamEmptyFails) {
     const hidl_string iface("");
     const hidl_string prefix("");
     const Return<void> ret = control->removeDownstream(iface, prefix, ASSERT_FALSE_CALLBACK);
@@ -654,7 +448,7 @@
 }
 
 // Test removeDownstream() fails given empty or non-existent interface names.
-TEST_P(OffloadControlHidlTest, RemoveDownstreamBogusIfaceFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, RemoveDownstreamBogusIfaceFails) {
     const hidl_string prefix("192.0.2.0/24");
     for (const auto& bogus : {"", "invalid"}) {
         SCOPED_TRACE(StringPrintf("iface='%s'", bogus));
@@ -665,7 +459,7 @@
 }
 
 // Test removeDownstream() fails given unparseable prefix arguments.
-TEST_P(OffloadControlHidlTest, RemoveDownstreamBogusPrefixFails) {
+TEST_P(OffloadControlTestV1_0_HalStarted, RemoveDownstreamBogusPrefixFails) {
     const hidl_string iface("dummy0");
     for (const auto& bogus : {"", "192.0.2/24", "2001:db8/64"}) {
         SCOPED_TRACE(StringPrintf("prefix='%s'", bogus));
@@ -677,21 +471,18 @@
 
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(OffloadControlHidlTestBase);
 INSTANTIATE_TEST_CASE_P(
-    PerInstance, OffloadControlHidlTestBase,
-    testing::Combine(
-        testing::ValuesIn(
-            android::hardware::getAllHalInstanceNames(IOffloadConfig::descriptor)),
-        testing::ValuesIn(
-            android::hardware::getAllHalInstanceNames(IOffloadControl::descriptor))),
-    android::hardware::PrintInstanceTupleNameToString<>);
+        PerInstance, OffloadControlTestV1_0_HalNotStarted,
+        testing::Combine(testing::ValuesIn(android::hardware::getAllHalInstanceNames(
+                                 IOffloadConfig::descriptor)),
+                         testing::ValuesIn(android::hardware::getAllHalInstanceNames(
+                                 IOffloadControl::descriptor))),
+        android::hardware::PrintInstanceTupleNameToString<>);
 
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(OffloadControlHidlTest);
 INSTANTIATE_TEST_CASE_P(
-    PerInstance, OffloadControlHidlTest,
-    testing::Combine(
-        testing::ValuesIn(
-            android::hardware::getAllHalInstanceNames(IOffloadConfig::descriptor)),
-        testing::ValuesIn(
-            android::hardware::getAllHalInstanceNames(IOffloadControl::descriptor))),
-    android::hardware::PrintInstanceTupleNameToString<>);
-
+        PerInstance, OffloadControlTestV1_0_HalStarted,
+        testing::Combine(testing::ValuesIn(android::hardware::getAllHalInstanceNames(
+                                 IOffloadConfig::descriptor)),
+                         testing::ValuesIn(android::hardware::getAllHalInstanceNames(
+                                 IOffloadControl::descriptor))),
+        android::hardware::PrintInstanceTupleNameToString<>);
diff --git a/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestBase.h b/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestBase.h
new file mode 100644
index 0000000..004019a
--- /dev/null
+++ b/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestBase.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <OffloadControlTestUtils.h>
+#include <VtsHalHidlTargetCallbackBase.h>
+#include <android-base/stringprintf.h>
+#include <android-base/unique_fd.h>
+#include <android/hardware/tetheroffload/config/1.0/IOffloadConfig.h>
+#include <android/hardware/tetheroffload/control/1.0/IOffloadControl.h>
+#include <android/hardware/tetheroffload/control/1.0/types.h>
+#include <gtest/gtest.h>
+#include <linux/netfilter/nfnetlink.h>
+#include <log/log.h>
+
+using android::sp;
+using android::base::StringPrintf;
+using android::base::unique_fd;
+using android::hardware::hidl_handle;
+using android::hardware::hidl_string;
+using android::hardware::hidl_vec;
+using android::hardware::Return;
+using android::hardware::Void;
+using android::hardware::tetheroffload::config::V1_0::IOffloadConfig;
+using android::hardware::tetheroffload::control::V1_0::IOffloadControl;
+using android::hardware::tetheroffload::control::V1_0::ITetheringOffloadCallback;
+using android::hardware::tetheroffload::control::V1_0::NatTimeoutUpdate;
+using android::hardware::tetheroffload::control::V1_0::OffloadCallbackEvent;
+
+constexpr char kCallbackOnEvent[] = "onEvent";
+constexpr char kCallbackUpdateTimeout[] = "updateTimeout";
+
+enum class ExpectBoolean {
+    Ignored = -1,
+    False = 0,
+    True = 1,
+};
+
+class TetheringOffloadCallbackArgs {
+  public:
+    OffloadCallbackEvent last_event;
+    NatTimeoutUpdate last_params;
+};
+
+class OffloadControlTestBase : public testing::TestWithParam<std::tuple<std::string, std::string>> {
+  public:
+    virtual void SetUp() = 0;
+
+    virtual void TearDown();
+
+    // Called once in setup stage to retrieve correct version of
+    // IOffloadControl object.
+    virtual sp<IOffloadControl> createControl(const std::string& serviceName) = 0;
+
+    // The IOffloadConfig HAL is tested more thoroughly elsewhere. Here the
+    // class just setup everything correctly and verify basic readiness.
+    void setupConfigHal();
+
+    void prepareControlHal();
+
+    void initOffload(const bool expected_result);
+
+    void setupControlHal();
+
+    void stopOffload(const ExpectBoolean value);
+
+    // Callback class for both events and NAT timeout updates.
+    class TetheringOffloadCallback
+        : public testing::VtsHalHidlTargetCallbackBase<TetheringOffloadCallbackArgs>,
+          public ITetheringOffloadCallback {
+      public:
+        TetheringOffloadCallback() = default;
+        virtual ~TetheringOffloadCallback() = default;
+
+        Return<void> onEvent(OffloadCallbackEvent event) override {
+            const TetheringOffloadCallbackArgs args{.last_event = event};
+            NotifyFromCallback(kCallbackOnEvent, args);
+            return Void();
+        };
+
+        Return<void> updateTimeout(const NatTimeoutUpdate& params) override {
+            const TetheringOffloadCallbackArgs args{.last_params = params};
+            NotifyFromCallback(kCallbackUpdateTimeout, args);
+            return Void();
+        };
+    };
+
+    sp<IOffloadConfig> config;
+    sp<IOffloadControl> control;
+    sp<TetheringOffloadCallback> control_cb;
+};
\ No newline at end of file
diff --git a/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestUtils.h b/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestUtils.h
new file mode 100644
index 0000000..f9e5783
--- /dev/null
+++ b/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestUtils.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <linux/netlink.h>
+#include <sys/socket.h>
+
+// We use #defines here so as to get local lamba captures and error message line numbers
+#define ASSERT_TRUE_CALLBACK                                    \
+    [&](bool success, std::string errMsg) {                     \
+        ASSERT_TRUE(success) << "unexpected error: " << errMsg; \
+    }
+
+#define ASSERT_FALSE_CALLBACK \
+    [&](bool success, std::string errMsg) { ASSERT_FALSE(success) << "expected error: " << errMsg; }
+
+#define ASSERT_ZERO_BYTES_CALLBACK            \
+    [&](uint64_t rxBytes, uint64_t txBytes) { \
+        EXPECT_EQ(0ULL, rxBytes);             \
+        EXPECT_EQ(0ULL, txBytes);             \
+    }
+
+inline const sockaddr* asSockaddr(const sockaddr_nl* nladdr);
+
+int conntrackSocket(unsigned groups);
\ No newline at end of file
diff --git a/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestV1_0.h b/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestV1_0.h
new file mode 100644
index 0000000..7492f8a
--- /dev/null
+++ b/tetheroffload/control/1.0/vts/functional/include/OffloadControlTestV1_0.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <OffloadControlTestBase.h>
+
+class OffloadControlTestV1_0_HalNotStarted : public OffloadControlTestBase {
+  public:
+    virtual void SetUp() override {
+        setupConfigHal();
+        // Create tether offload control object without calling its initOffload.
+        prepareControlHal();
+    }
+
+    virtual sp<IOffloadControl> createControl(const std::string& serviceName) override {
+        return IOffloadControl::getService(serviceName);
+    }
+};
+
+class OffloadControlTestV1_0_HalStarted : public OffloadControlTestV1_0_HalNotStarted {
+  public:
+    virtual void SetUp() override {
+        setupConfigHal();
+        setupControlHal();
+    }
+};
diff --git a/vibrator/aidl/android/hardware/vibrator/IVibrator.aidl b/vibrator/aidl/android/hardware/vibrator/IVibrator.aidl
index 0b21248..cd7b603 100644
--- a/vibrator/aidl/android/hardware/vibrator/IVibrator.aidl
+++ b/vibrator/aidl/android/hardware/vibrator/IVibrator.aidl
@@ -206,7 +206,10 @@
      * device/board configuration files ensuring that no ID is assigned to
      * multiple clients. No client should use this API unless explicitly
      * assigned an always-on source ID. Clients must develop their own way to
-     * get IDs from vendor in a stable way.
+     * get IDs from vendor in a stable way. For instance, a client may expose
+     * a stable API (via HAL, sysprops, or xml overlays) to allow vendor to
+     * associate a hardware ID with a specific usecase. When that usecase is
+     * triggered, a client would use that hardware ID here.
      *
      * @param id The device-specific always-on source ID to enable.
      * @param effect The type of haptic event to trigger.
diff --git a/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp b/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
index 888a403..e51f594 100644
--- a/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
+++ b/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
@@ -96,7 +96,7 @@
 }
 
 TEST_P(VibratorAidl, OnWithCallback) {
-    if (!(capabilities & IVibrator::CAP_PERFORM_CALLBACK)) return;
+    if (!(capabilities & IVibrator::CAP_ON_CALLBACK)) return;
 
     std::promise<void> completionPromise;
     std::future<void> completionFuture{completionPromise.get_future()};
@@ -110,7 +110,7 @@
 }
 
 TEST_P(VibratorAidl, OnCallbackNotSupported) {
-    if (!(capabilities & IVibrator::CAP_PERFORM_CALLBACK)) {
+    if (!(capabilities & IVibrator::CAP_ON_CALLBACK)) {
         sp<CompletionCallback> callback = new CompletionCallback([] {});
         EXPECT_EQ(Status::EX_UNSUPPORTED_OPERATION, vibrator->on(250, callback).exceptionCode());
     }
diff --git a/wifi/1.4/default/wifi_legacy_hal.cpp b/wifi/1.4/default/wifi_legacy_hal.cpp
index 29123bf..d7a5d6c 100644
--- a/wifi/1.4/default/wifi_legacy_hal.cpp
+++ b/wifi/1.4/default/wifi_legacy_hal.cpp
@@ -36,7 +36,7 @@
 static constexpr uint32_t kLinkLayerStatsDataMpduSizeThreshold = 128;
 static constexpr uint32_t kMaxWakeReasonStatsArraySize = 32;
 static constexpr uint32_t kMaxRingBuffers = 10;
-static constexpr uint32_t kMaxStopCompleteWaitMs = 100;
+static constexpr uint32_t kMaxStopCompleteWaitMs = 300;
 static constexpr char kDriverPropName[] = "wlan.driver.status";
 
 // Helper function to create a non-const char* for legacy Hal API's.
diff --git a/wifi/supplicant/1.1/vts/functional/supplicant_hidl_test.cpp b/wifi/supplicant/1.1/vts/functional/supplicant_hidl_test.cpp
index 76d12d7..6ad4290 100644
--- a/wifi/supplicant/1.1/vts/functional/supplicant_hidl_test.cpp
+++ b/wifi/supplicant/1.1/vts/functional/supplicant_hidl_test.cpp
@@ -75,7 +75,7 @@
  * AddP2pInterface
  */
 TEST_P(SupplicantHidlTest, AddP2pInterface) {
-    if (isP2pOn_) return;
+    if (!isP2pOn_) return;
     ISupplicant::IfaceInfo iface_info;
     iface_info.name = getP2pIfaceName();
     iface_info.type = IfaceType::P2P;
@@ -115,7 +115,7 @@
  * RemoveP2pInterface
  */
 TEST_P(SupplicantHidlTest, RemoveP2pInterface) {
-    if (isP2pOn_) return;
+    if (!isP2pOn_) return;
     ISupplicant::IfaceInfo iface_info;
     iface_info.name = getP2pIfaceName();
     iface_info.type = IfaceType::P2P;