diff --git a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
index 02462fc..8382781 100644
--- a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
@@ -25,6 +25,7 @@
 #include <cppbor_parse.h>
 #include <cutils/properties.h>
 #include <gmock/gmock.h>
+#include <openssl/evp.h>
 #include <openssl/mem.h>
 #include <remote_prov/remote_prov_utils.h>
 
@@ -206,6 +207,21 @@
     return boot_patch_level(key_characteristics_);
 }
 
+bool KeyMintAidlTestBase::Curve25519Supported() {
+    // Strongbox never supports curve 25519.
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        return false;
+    }
+
+    // Curve 25519 was included in version 2 of the KeyMint interface.
+    int32_t version = 0;
+    auto status = keymint_->getInterfaceVersion(&version);
+    if (!status.isOk()) {
+        ADD_FAILURE() << "Failed to determine interface version";
+    }
+    return version >= 2;
+}
+
 ErrorCode KeyMintAidlTestBase::GetReturnErrorCode(const Status& result) {
     if (result.isOk()) return ErrorCode::OK;
 
@@ -740,6 +756,19 @@
 
     if (digest == Digest::NONE) {
         switch (EVP_PKEY_id(pub_key.get())) {
+            case EVP_PKEY_ED25519: {
+                ASSERT_EQ(64, signature.size());
+                uint8_t pub_keydata[32];
+                size_t pub_len = sizeof(pub_keydata);
+                ASSERT_EQ(1, EVP_PKEY_get_raw_public_key(pub_key.get(), pub_keydata, &pub_len));
+                ASSERT_EQ(sizeof(pub_keydata), pub_len);
+                ASSERT_EQ(1, ED25519_verify(reinterpret_cast<const uint8_t*>(message.data()),
+                                            message.size(),
+                                            reinterpret_cast<const uint8_t*>(signature.data()),
+                                            pub_keydata));
+                break;
+            }
+
             case EVP_PKEY_EC: {
                 vector<uint8_t> data((EVP_PKEY_bits(pub_key.get()) + 7) / 8);
                 size_t data_size = std::min(data.size(), message.size());
@@ -1165,16 +1194,31 @@
 vector<EcCurve> KeyMintAidlTestBase::ValidCurves() {
     if (securityLevel_ == SecurityLevel::STRONGBOX) {
         return {EcCurve::P_256};
+    } else if (Curve25519Supported()) {
+        return {EcCurve::P_224, EcCurve::P_256, EcCurve::P_384, EcCurve::P_521,
+                EcCurve::CURVE_25519};
     } else {
-        return {EcCurve::P_224, EcCurve::P_256, EcCurve::P_384, EcCurve::P_521};
+        return {
+                EcCurve::P_224,
+                EcCurve::P_256,
+                EcCurve::P_384,
+                EcCurve::P_521,
+        };
     }
 }
 
 vector<EcCurve> KeyMintAidlTestBase::InvalidCurves() {
     if (SecLevel() == SecurityLevel::STRONGBOX) {
-        return {EcCurve::P_224, EcCurve::P_384, EcCurve::P_521};
+        // Curve 25519 is not supported, either because:
+        // - KeyMint v1: it's an unknown enum value
+        // - KeyMint v2+: it's not supported by StrongBox.
+        return {EcCurve::P_224, EcCurve::P_384, EcCurve::P_521, EcCurve::CURVE_25519};
     } else {
-        return {};
+        if (Curve25519Supported()) {
+            return {};
+        } else {
+            return {EcCurve::CURVE_25519};
+        }
     }
 }
 
diff --git a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
index 61f9d4d..27cb99c 100644
--- a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
+++ b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
@@ -80,6 +80,8 @@
     uint32_t boot_patch_level(const vector<KeyCharacteristics>& key_characteristics);
     uint32_t boot_patch_level();
 
+    bool Curve25519Supported();
+
     ErrorCode GetReturnErrorCode(const Status& result);
 
     ErrorCode GenerateKey(const AuthorizationSet& key_desc, vector<uint8_t>* key_blob,
diff --git a/security/keymint/aidl/vts/functional/KeyMintTest.cpp b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
index 5b80b6f..7f35f34 100644
--- a/security/keymint/aidl/vts/functional/KeyMintTest.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
@@ -22,6 +22,7 @@
 #include <algorithm>
 #include <iostream>
 
+#include <openssl/curve25519.h>
 #include <openssl/ec.h>
 #include <openssl/evp.h>
 #include <openssl/mem.h>
@@ -415,6 +416,126 @@
         // } end SEQUENCE (PrivateKeyInfo)
 );
 
+/**
+ * Ed25519 key pair generated as follows:
+ * ```
+ * % openssl req -x509 -newkey ED25519 -days 700 -nodes \
+ *  -keyout ed25519_priv.key -out ed25519.pem * -subj "/CN=fake.ed25519.com"
+ * Generating a ED25519 private key writing new private key to
+ * 'ed25519_priv.key'
+ * -----
+ * % cat ed25519_priv.key
+ * -----BEGIN PRIVATE KEY-----
+ * MC4CAQAwBQYDK2VwBCIEIKl3A5quNywcj1P+0XI9SBalFPIvO52NxceMLRH6dVmR
+ * -----END PRIVATE KEY-----
+ * % der2ascii -pem -i ed25519_priv.key
+ * SEQUENCE {
+ *   INTEGER { 0 }
+ *   SEQUENCE {
+ *     # ed25519
+ *     OBJECT_IDENTIFIER { 1.3.101.112 }
+ *   }
+ *   OCTET_STRING {
+ *     OCTET_STRING { `a977039aae372c1c8f53fed1723d4816a514f22f3b9d8dc5c78c2d11fa755991` }
+ *   }
+ * }
+ * % cat ed25519.pem
+ * -----BEGIN CERTIFICATE-----
+ * MIIBSjCB/aADAgECAhR0Jron3eKcdgqyecv/eEfGWAzn8DAFBgMrZXAwGzEZMBcG
+ * A1UEAwwQZmFrZS5lZDI1NTE5LmNvbTAeFw0yMTEwMjAwODI3NDJaFw0yMzA5MjAw
+ * ODI3NDJaMBsxGTAXBgNVBAMMEGZha2UuZWQyNTUxOS5jb20wKjAFBgMrZXADIQDv
+ * uwHz+3TaQ69D2digxlz0fFfsZg0rPqgQae3jBPRWkaNTMFEwHQYDVR0OBBYEFN9O
+ * od30SY4JTs66ZR403UPya+iXMB8GA1UdIwQYMBaAFN9Ood30SY4JTs66ZR403UPy
+ * a+iXMA8GA1UdEwEB/wQFMAMBAf8wBQYDK2VwA0EAKjVrYQjuE/gEL2j/ABpDbFjV
+ * Ilg5tJ6MN/P3psAv3Cs7f0X1lFqdlt15nJ/6aj2cmGCwNRXt5wcyYDKNu+v2Dw==
+ * -----END CERTIFICATE-----
+ * % openssl x509 -in ed25519.pem -text -noout
+ * Certificate:
+ *     Data:
+ *         Version: 3 (0x2)
+ *         Serial Number:
+ *             74:26:ba:27:dd:e2:9c:76:0a:b2:79:cb:ff:78:47:c6:58:0c:e7:f0
+ *         Signature Algorithm: ED25519
+ *         Issuer: CN = fake.ed25519.com
+ *         Validity
+ *             Not Before: Oct 20 08:27:42 2021 GMT
+ *             Not After : Sep 20 08:27:42 2023 GMT
+ *         Subject: CN = fake.ed25519.com
+ *         Subject Public Key Info:
+ *             Public Key Algorithm: ED25519
+ *                 ED25519 Public-Key:
+ *                 pub:
+ *                     ef:bb:01:f3:fb:74:da:43:af:43:d9:d8:a0:c6:5c:
+ *                     f4:7c:57:ec:66:0d:2b:3e:a8:10:69:ed:e3:04:f4:
+ *                     56:91
+ *         X509v3 extensions:
+ *             X509v3 Subject Key Identifier:
+ *                 DF:4E:A1:DD:F4:49:8E:09:4E:CE:BA:65:1E:34:DD:43:F2:6B:E8:97
+ *             X509v3 Authority Key Identifier:
+ *                 keyid:DF:4E:A1:DD:F4:49:8E:09:4E:CE:BA:65:1E:34:DD:43:F2:6B:E8:97
+ *
+ *             X509v3 Basic Constraints: critical
+ *                 CA:TRUE
+ *     Signature Algorithm: ED25519
+ *          2a:35:6b:61:08:ee:13:f8:04:2f:68:ff:00:1a:43:6c:58:d5:
+ *          22:58:39:b4:9e:8c:37:f3:f7:a6:c0:2f:dc:2b:3b:7f:45:f5:
+ *          94:5a:9d:96:dd:79:9c:9f:fa:6a:3d:9c:98:60:b0:35:15:ed:
+ *          e7:07:32:60:32:8d:bb:eb:f6:0f
+ * ```
+ */
+string ed25519_key = hex2str("a977039aae372c1c8f53fed1723d4816a514f22f3b9d8dc5c78c2d11fa755991");
+string ed25519_pkcs8_key = hex2str(
+        // RFC 5208 s5
+        "302e"    // SEQUENCE length 0x2e (PrivateKeyInfo) {
+        "0201"    // INTEGER length 1 (Version)
+        "00"      // version 0
+        "3005"    // SEQUENCE length 05 (AlgorithmIdentifier) {
+        "0603"    // OBJECT IDENTIFIER length 3 (algorithm)
+        "2b6570"  // 1.3.101.112 (id-Ed125519 RFC 8410 s3)
+        // } end SEQUENCE (AlgorithmIdentifier)
+        "0422"  // OCTET STRING length 0x22 (PrivateKey)
+        "0420"  // OCTET STRING length 0x20 (RFC 8410 s7)
+        "a977039aae372c1c8f53fed1723d4816a514f22f3b9d8dc5c78c2d11fa755991"
+        // } end SEQUENCE (PrivateKeyInfo)
+);
+string ed25519_pubkey = hex2str("efbb01f3fb74da43af43d9d8a0c65cf47c57ec660d2b3ea81069ede304f45691");
+
+/**
+ * X25519 key pair generated as follows:
+ * ```
+ * % openssl genpkey -algorithm X25519 > x25519_priv.key
+ * % cat x25519_priv.key
+ * -----BEGIN PRIVATE KEY-----
+ * MC4CAQAwBQYDK2VuBCIEIGgPwF3NLwQx/Sfwr2nfJvXitwlDNh3Skzh+TISN/y1C
+ * -----END PRIVATE KEY-----
+ * % der2ascii -pem -i x25519_priv.key
+ * SEQUENCE {
+ *   INTEGER { 0 }
+ *   SEQUENCE {
+ *     # x25519
+ *     OBJECT_IDENTIFIER { 1.3.101.110 }
+ *   }
+ *   OCTET_STRING {
+ *     OCTET_STRING { `680fc05dcd2f0431fd27f0af69df26f5e2b70943361dd293387e4c848dff2d42` }
+ *   }
+ * }
+ * ```
+ */
+
+string x25519_key = hex2str("680fc05dcd2f0431fd27f0af69df26f5e2b70943361dd293387e4c848dff2d42");
+string x25519_pkcs8_key = hex2str(
+        // RFC 5208 s5
+        "302e"    // SEQUENCE length 0x2e (PrivateKeyInfo) {
+        "0201"    // INTEGER length 1 (Version)
+        "00"      // version 0
+        "3005"    // SEQUENCE length 05 (AlgorithmIdentifier) {
+        "0603"    // OBJECT IDENTIFIER length 3 (algorithm)
+        "2b656e"  // 1.3.101.110 (id-X125519 RFC 8410 s3)
+        "0422"    // OCTET STRING length 0x22 (PrivateKey)
+        "0420"    // OCTET STRING length 0x20 (RFC 8410 s7)
+        "680fc05dcd2f0431fd27f0af69df26f5e2b70943361dd293387e4c848dff2d42");
+string x25519_pubkey = hex2str("be46925a857f17831d6d454b9d3d36a4a30166edf80eb82b684661c3e258f768");
+
 struct RSA_Delete {
     void operator()(RSA* p) { RSA_free(p); }
 };
@@ -1374,7 +1495,7 @@
 /*
  * NewKeyGenerationTest.Ecdsa
  *
- * Verifies that keymint can generate all required EC key sizes, and that the resulting keys
+ * Verifies that keymint can generate all required EC curves, and that the resulting keys
  * have correct characteristics.
  */
 TEST_P(NewKeyGenerationTest, Ecdsa) {
@@ -1400,6 +1521,65 @@
 }
 
 /*
+ * NewKeyGenerationTest.EcdsaCurve25519
+ *
+ * Verifies that keymint can generate a curve25519 key, and that the resulting key
+ * has correct characteristics.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaCurve25519) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    EcCurve curve = EcCurve::CURVE_25519;
+    vector<uint8_t> key_blob;
+    vector<KeyCharacteristics> key_characteristics;
+    ErrorCode result = GenerateKey(AuthorizationSetBuilder()
+                                           .EcdsaSigningKey(curve)
+                                           .Digest(Digest::NONE)
+                                           .SetDefaultValidity(),
+                                   &key_blob, &key_characteristics);
+    ASSERT_EQ(result, ErrorCode::OK);
+    ASSERT_GT(key_blob.size(), 0U);
+
+    EXPECT_TRUE(ChainSignaturesAreValid(cert_chain_));
+    ASSERT_GT(cert_chain_.size(), 0);
+
+    CheckBaseParams(key_characteristics);
+    CheckCharacteristics(key_blob, key_characteristics);
+
+    AuthorizationSet crypto_params = SecLevelAuthorizations(key_characteristics);
+
+    EXPECT_TRUE(crypto_params.Contains(TAG_ALGORITHM, Algorithm::EC));
+    EXPECT_TRUE(crypto_params.Contains(TAG_EC_CURVE, curve)) << "Curve " << curve << "missing";
+
+    CheckedDeleteKey(&key_blob);
+}
+
+/*
+ * NewKeyGenerationTest.EcCurve25519MultiPurposeFail
+ *
+ * Verifies that KeyMint rejects an attempt to generate a curve 25519 key for both
+ * SIGN and AGREE_KEY.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaCurve25519MultiPurposeFail) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    EcCurve curve = EcCurve::CURVE_25519;
+    vector<uint8_t> key_blob;
+    vector<KeyCharacteristics> key_characteristics;
+    ErrorCode result = GenerateKey(AuthorizationSetBuilder()
+                                           .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                           .EcdsaSigningKey(curve)
+                                           .Digest(Digest::NONE)
+                                           .SetDefaultValidity(),
+                                   &key_blob, &key_characteristics);
+    ASSERT_EQ(result, ErrorCode::INCOMPATIBLE_PURPOSE);
+}
+
+/*
  * NewKeyGenerationTest.EcdsaAttestation
  *
  * Verifies that for all Ecdsa key sizes, if challenge and app id is provided,
@@ -1453,6 +1633,62 @@
 }
 
 /*
+ * NewKeyGenerationTest.EcdsaAttestationCurve25519
+ *
+ * Verifies that for a curve 25519 key, if challenge and app id is provided,
+ * an attestation will be generated.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaAttestationCurve25519) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    EcCurve curve = EcCurve::CURVE_25519;
+    auto challenge = "hello";
+    auto app_id = "foo";
+
+    auto subject = "cert subj 2";
+    vector<uint8_t> subject_der(make_name_from_str(subject));
+
+    uint64_t serial_int = 0xFFFFFFFFFFFFFFFF;
+    vector<uint8_t> serial_blob(build_serial_blob(serial_int));
+
+    vector<uint8_t> key_blob;
+    vector<KeyCharacteristics> key_characteristics;
+    ErrorCode result = GenerateKey(AuthorizationSetBuilder()
+                                           .Authorization(TAG_NO_AUTH_REQUIRED)
+                                           .EcdsaSigningKey(curve)
+                                           .Digest(Digest::NONE)
+                                           .AttestationChallenge(challenge)
+                                           .AttestationApplicationId(app_id)
+                                           .Authorization(TAG_CERTIFICATE_SERIAL, serial_blob)
+                                           .Authorization(TAG_CERTIFICATE_SUBJECT, subject_der)
+                                           .SetDefaultValidity(),
+                                   &key_blob, &key_characteristics);
+    ASSERT_EQ(ErrorCode::OK, result);
+    ASSERT_GT(key_blob.size(), 0U);
+    CheckBaseParams(key_characteristics);
+    CheckCharacteristics(key_blob, key_characteristics);
+
+    AuthorizationSet crypto_params = SecLevelAuthorizations(key_characteristics);
+
+    EXPECT_TRUE(crypto_params.Contains(TAG_ALGORITHM, Algorithm::EC));
+    EXPECT_TRUE(crypto_params.Contains(TAG_EC_CURVE, curve)) << "Curve " << curve << "missing";
+
+    EXPECT_TRUE(ChainSignaturesAreValid(cert_chain_));
+    ASSERT_GT(cert_chain_.size(), 0);
+    verify_subject_and_serial(cert_chain_[0], serial_int, subject, false);
+
+    AuthorizationSet hw_enforced = HwEnforcedAuthorizations(key_characteristics);
+    AuthorizationSet sw_enforced = SwEnforcedAuthorizations(key_characteristics);
+    EXPECT_TRUE(verify_attestation_record(AidlVersion(), challenge, app_id,  //
+                                          sw_enforced, hw_enforced, SecLevel(),
+                                          cert_chain_[0].encodedCertificate));
+
+    CheckedDeleteKey(&key_blob);
+}
+
+/*
  * NewKeyGenerationTest.EcdsaAttestationTags
  *
  * Verifies that creation of an attested ECDSA key includes various tags in the
@@ -1984,20 +2220,22 @@
 }
 
 /*
- * NewKeyGenerationTest.EcdsaInvalidSize
+ * NewKeyGenerationTest.EcdsaInvalidCurve
  *
- * Verifies that specifying an invalid key size for EC key generation returns
+ * Verifies that specifying an invalid curve for EC key generation returns
  * UNSUPPORTED_KEY_SIZE.
  */
-TEST_P(NewKeyGenerationTest, EcdsaInvalidSize) {
+TEST_P(NewKeyGenerationTest, EcdsaInvalidCurve) {
     for (auto curve : InvalidCurves()) {
         vector<uint8_t> key_blob;
         vector<KeyCharacteristics> key_characteristics;
-        ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE, GenerateKey(AuthorizationSetBuilder()
-                                                                       .EcdsaSigningKey(curve)
-                                                                       .Digest(Digest::NONE)
-                                                                       .SetDefaultValidity(),
-                                                               &key_blob, &key_characteristics));
+        auto result = GenerateKey(AuthorizationSetBuilder()
+                                          .EcdsaSigningKey(curve)
+                                          .Digest(Digest::NONE)
+                                          .SetDefaultValidity(),
+                                  &key_blob, &key_characteristics);
+        ASSERT_TRUE(result == ErrorCode::UNSUPPORTED_KEY_SIZE ||
+                    result == ErrorCode::UNSUPPORTED_EC_CURVE);
     }
 
     ASSERT_EQ(ErrorCode::UNSUPPORTED_KEY_SIZE,
@@ -2808,15 +3046,19 @@
 /*
  * SigningOperationsTest.EcdsaAllDigestsAndCurves
  *
- * Verifies ECDSA signature/verification for all digests and curves.
+ * Verifies ECDSA signature/verification for all digests and required curves.
  */
 TEST_P(SigningOperationsTest, EcdsaAllDigestsAndCurves) {
-    auto digests = ValidDigests(true /* withNone */, false /* withMD5 */);
 
     string message = "1234567890";
     string corrupt_message = "2234567890";
     for (auto curve : ValidCurves()) {
         SCOPED_TRACE(testing::Message() << "Curve::" << curve);
+        // Ed25519 only allows Digest::NONE.
+        auto digests = (curve == EcCurve::CURVE_25519)
+                               ? std::vector<Digest>(1, Digest::NONE)
+                               : ValidDigests(true /* withNone */, false /* withMD5 */);
+
         ErrorCode error = GenerateKey(AuthorizationSetBuilder()
                                               .Authorization(TAG_NO_AUTH_REQUIRED)
                                               .EcdsaSigningKey(curve)
@@ -2841,25 +3083,50 @@
 /*
  * SigningOperationsTest.EcdsaAllCurves
  *
- * Verifies that ECDSA operations succeed with all possible curves.
+ * Verifies that ECDSA operations succeed with all required curves.
  */
 TEST_P(SigningOperationsTest, EcdsaAllCurves) {
     for (auto curve : ValidCurves()) {
+        Digest digest = (curve == EcCurve::CURVE_25519 ? Digest::NONE : Digest::SHA_2_256);
+        SCOPED_TRACE(testing::Message() << "Curve::" << curve);
         ErrorCode error = GenerateKey(AuthorizationSetBuilder()
                                               .Authorization(TAG_NO_AUTH_REQUIRED)
                                               .EcdsaSigningKey(curve)
-                                              .Digest(Digest::SHA_2_256)
+                                              .Digest(digest)
                                               .SetDefaultValidity());
         EXPECT_EQ(ErrorCode::OK, error) << "Failed to generate ECDSA key with curve " << curve;
         if (error != ErrorCode::OK) continue;
 
         string message(1024, 'a');
-        SignMessage(message, AuthorizationSetBuilder().Digest(Digest::SHA_2_256));
+        SignMessage(message, AuthorizationSetBuilder().Digest(digest));
         CheckedDeleteKey();
     }
 }
 
 /*
+ * SigningOperationsTest.EcdsaCurve25519
+ *
+ * Verifies that ECDSA operations succeed with curve25519.
+ */
+TEST_P(SigningOperationsTest, EcdsaCurve25519) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    EcCurve curve = EcCurve::CURVE_25519;
+    ErrorCode error = GenerateKey(AuthorizationSetBuilder()
+                                          .Authorization(TAG_NO_AUTH_REQUIRED)
+                                          .EcdsaSigningKey(curve)
+                                          .Digest(Digest::NONE)
+                                          .SetDefaultValidity());
+    ASSERT_EQ(ErrorCode::OK, error) << "Failed to generate ECDSA key with curve " << curve;
+
+    string message(1024, 'a');
+    SignMessage(message, AuthorizationSetBuilder().Digest(Digest::NONE));
+    CheckedDeleteKey();
+}
+
+/*
  * SigningOperationsTest.EcdsaNoDigestHugeData
  *
  * Verifies that ECDSA operations support very large messages, even without digesting.  This
@@ -3509,6 +3776,255 @@
 }
 
 /*
+ * ImportKeyTest.Ed25519RawSuccess
+ *
+ * Verifies that importing and using a raw Ed25519 private key works correctly.
+ */
+TEST_P(ImportKeyTest, Ed25519RawSuccess) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaSigningKey(EcCurve::CURVE_25519)
+                                               .Digest(Digest::NONE)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::RAW, ed25519_key));
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::CURVE_25519);
+    CheckOrigin();
+
+    // The returned cert should hold the correct public key.
+    ASSERT_GT(cert_chain_.size(), 0);
+    X509_Ptr kmKeyCert(parse_cert_blob(cert_chain_[0].encodedCertificate));
+    ASSERT_NE(kmKeyCert, nullptr);
+    EVP_PKEY_Ptr kmPubKey(X509_get_pubkey(kmKeyCert.get()));
+    ASSERT_NE(kmPubKey.get(), nullptr);
+    size_t kmPubKeySize = 32;
+    uint8_t kmPubKeyData[32];
+    ASSERT_EQ(1, EVP_PKEY_get_raw_public_key(kmPubKey.get(), kmPubKeyData, &kmPubKeySize));
+    ASSERT_EQ(kmPubKeySize, 32);
+    EXPECT_EQ(string(kmPubKeyData, kmPubKeyData + 32), ed25519_pubkey);
+
+    string message(32, 'a');
+    auto params = AuthorizationSetBuilder().Digest(Digest::NONE);
+    string signature = SignMessage(message, params);
+    LocalVerifyMessage(message, signature, params);
+}
+
+/*
+ * ImportKeyTest.Ed25519Pkcs8Success
+ *
+ * Verifies that importing and using a PKCS#8-encoded Ed25519 private key works correctly.
+ */
+TEST_P(ImportKeyTest, Ed25519Pkcs8Success) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaSigningKey(EcCurve::CURVE_25519)
+                                               .Digest(Digest::NONE)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, ed25519_pkcs8_key));
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::CURVE_25519);
+    CheckOrigin();
+
+    // The returned cert should hold the correct public key.
+    ASSERT_GT(cert_chain_.size(), 0);
+    X509_Ptr kmKeyCert(parse_cert_blob(cert_chain_[0].encodedCertificate));
+    ASSERT_NE(kmKeyCert, nullptr);
+    EVP_PKEY_Ptr kmPubKey(X509_get_pubkey(kmKeyCert.get()));
+    ASSERT_NE(kmPubKey.get(), nullptr);
+    size_t kmPubKeySize = 32;
+    uint8_t kmPubKeyData[32];
+    ASSERT_EQ(1, EVP_PKEY_get_raw_public_key(kmPubKey.get(), kmPubKeyData, &kmPubKeySize));
+    ASSERT_EQ(kmPubKeySize, 32);
+    EXPECT_EQ(string(kmPubKeyData, kmPubKeyData + 32), ed25519_pubkey);
+
+    string message(32, 'a');
+    auto params = AuthorizationSetBuilder().Digest(Digest::NONE);
+    string signature = SignMessage(message, params);
+    LocalVerifyMessage(message, signature, params);
+}
+
+/*
+ * ImportKeyTest.Ed25519CurveMismatch
+ *
+ * Verifies that importing an Ed25519 key pair with a curve that doesn't match the key fails in
+ * the correct way.
+ */
+TEST_P(ImportKeyTest, Ed25519CurveMismatch) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_NE(ErrorCode::OK,
+              ImportKey(AuthorizationSetBuilder()
+                                .EcdsaSigningKey(EcCurve::P_224 /* Doesn't match key */)
+                                .Digest(Digest::NONE)
+                                .SetDefaultValidity(),
+                        KeyFormat::RAW, ed25519_key));
+}
+
+/*
+ * ImportKeyTest.Ed25519FormatMismatch
+ *
+ * Verifies that importing an Ed25519 key pair with an invalid format fails.
+ */
+TEST_P(ImportKeyTest, Ed25519FormatMismatch) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaSigningKey(EcCurve::CURVE_25519)
+                                               .Digest(Digest::NONE)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, ed25519_key));
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaSigningKey(EcCurve::CURVE_25519)
+                                               .Digest(Digest::NONE)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::RAW, ed25519_pkcs8_key));
+}
+
+/*
+ * ImportKeyTest.Ed25519PurposeMismatch
+ *
+ * Verifies that importing an Ed25519 key pair with an invalid purpose fails.
+ */
+TEST_P(ImportKeyTest, Ed25519PurposeMismatch) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    // Can't have both SIGN and ATTEST_KEY
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaSigningKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::ATTEST_KEY)
+                                               .Digest(Digest::NONE)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::RAW, ed25519_key));
+    // AGREE_KEY is for X25519 (but can only tell the difference if the import key is in
+    // PKCS#8 format and so includes an OID).
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                               .Digest(Digest::NONE)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, ed25519_pkcs8_key));
+}
+
+/*
+ * ImportKeyTest.X25519RawSuccess
+ *
+ * Verifies that importing and using a raw X25519 private key works correctly.
+ */
+TEST_P(ImportKeyTest, X25519RawSuccess) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::RAW, x25519_key));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::CURVE_25519);
+    CheckOrigin();
+}
+
+/*
+ * ImportKeyTest.X25519Pkcs8Success
+ *
+ * Verifies that importing and using a PKCS#8-encoded X25519 private key works correctly.
+ */
+TEST_P(ImportKeyTest, X25519Pkcs8Success) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, x25519_pkcs8_key));
+
+    CheckCryptoParam(TAG_ALGORITHM, Algorithm::EC);
+    CheckCryptoParam(TAG_EC_CURVE, EcCurve::CURVE_25519);
+    CheckOrigin();
+}
+
+/*
+ * ImportKeyTest.X25519CurveMismatch
+ *
+ * Verifies that importing an X25519 key with a curve that doesn't match the key fails in
+ * the correct way.
+ */
+TEST_P(ImportKeyTest, X25519CurveMismatch) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaKey(EcCurve::P_224 /* Doesn't match key */)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::RAW, x25519_key));
+}
+
+/*
+ * ImportKeyTest.X25519FormatMismatch
+ *
+ * Verifies that importing an X25519 key with an invalid format fails.
+ */
+TEST_P(ImportKeyTest, X25519FormatMismatch) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, x25519_key));
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::RAW, x25519_pkcs8_key));
+}
+
+/*
+ * ImportKeyTest.X25519PurposeMismatch
+ *
+ * Verifies that importing an X25519 key pair with an invalid format fails.
+ */
+TEST_P(ImportKeyTest, X25519PurposeMismatch) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::ATTEST_KEY)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, x25519_pkcs8_key));
+    ASSERT_NE(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .EcdsaSigningKey(EcCurve::CURVE_25519)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, x25519_pkcs8_key));
+}
+
+/*
  * ImportKeyTest.AesSuccess
  *
  * Verifies that importing and using an AES key works.
@@ -6655,8 +7171,6 @@
 
 INSTANTIATE_KEYMINT_AIDL_TEST(TransportLimitTest);
 
-typedef KeyMintAidlTestBase KeyAgreementTest;
-
 static int EcdhCurveToOpenSslCurveName(EcCurve curve) {
     switch (curve) {
         case EcCurve::P_224:
@@ -6672,10 +7186,108 @@
     }
 }
 
+class KeyAgreementTest : public KeyMintAidlTestBase {
+  protected:
+    void GenerateLocalEcKey(EcCurve localCurve, EVP_PKEY_Ptr* localPrivKey,
+                            std::vector<uint8_t>* localPublicKey) {
+        // Generate EC key locally (with access to private key material)
+        if (localCurve == EcCurve::CURVE_25519) {
+            uint8_t privKeyData[32];
+            uint8_t pubKeyData[32];
+            X25519_keypair(pubKeyData, privKeyData);
+            *localPublicKey = vector<uint8_t>(pubKeyData, pubKeyData + 32);
+            *localPrivKey = EVP_PKEY_Ptr(EVP_PKEY_new_raw_private_key(
+                    EVP_PKEY_X25519, nullptr, privKeyData, sizeof(privKeyData)));
+        } else {
+            auto ecKey = EC_KEY_Ptr(EC_KEY_new());
+            int curveName = EcdhCurveToOpenSslCurveName(localCurve);
+            auto group = EC_GROUP_Ptr(EC_GROUP_new_by_curve_name(curveName));
+            ASSERT_NE(group, nullptr);
+            ASSERT_EQ(EC_KEY_set_group(ecKey.get(), group.get()), 1);
+            ASSERT_EQ(EC_KEY_generate_key(ecKey.get()), 1);
+            *localPrivKey = EVP_PKEY_Ptr(EVP_PKEY_new());
+            ASSERT_EQ(EVP_PKEY_set1_EC_KEY(localPrivKey->get(), ecKey.get()), 1);
+
+            // Get encoded form of the public part of the locally generated key...
+            unsigned char* p = nullptr;
+            int localPublicKeySize = i2d_PUBKEY(localPrivKey->get(), &p);
+            ASSERT_GT(localPublicKeySize, 0);
+            *localPublicKey =
+                    vector<uint8_t>(reinterpret_cast<const uint8_t*>(p),
+                                    reinterpret_cast<const uint8_t*>(p + localPublicKeySize));
+            OPENSSL_free(p);
+        }
+    }
+
+    void GenerateKeyMintEcKey(EcCurve curve, EVP_PKEY_Ptr* kmPubKey) {
+        vector<uint8_t> challenge = {0x41, 0x42};
+        ErrorCode result =
+                GenerateKey(AuthorizationSetBuilder()
+                                    .Authorization(TAG_NO_AUTH_REQUIRED)
+                                    .Authorization(TAG_EC_CURVE, curve)
+                                    .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                    .Authorization(TAG_ALGORITHM, Algorithm::EC)
+                                    .Authorization(TAG_ATTESTATION_APPLICATION_ID, {0x61, 0x62})
+                                    .Authorization(TAG_ATTESTATION_CHALLENGE, challenge)
+                                    .SetDefaultValidity());
+        ASSERT_EQ(ErrorCode::OK, result) << "Failed to generate key";
+        ASSERT_GT(cert_chain_.size(), 0);
+        X509_Ptr kmKeyCert(parse_cert_blob(cert_chain_[0].encodedCertificate));
+        ASSERT_NE(kmKeyCert, nullptr);
+        // Check that keyAgreement (bit 4) is set in KeyUsage
+        EXPECT_TRUE((X509_get_key_usage(kmKeyCert.get()) & X509v3_KU_KEY_AGREEMENT) != 0);
+        *kmPubKey = EVP_PKEY_Ptr(X509_get_pubkey(kmKeyCert.get()));
+        ASSERT_NE(*kmPubKey, nullptr);
+        if (dump_Attestations) {
+            for (size_t n = 0; n < cert_chain_.size(); n++) {
+                std::cout << bin2hex(cert_chain_[n].encodedCertificate) << std::endl;
+            }
+        }
+    }
+
+    void CheckAgreement(EVP_PKEY_Ptr kmPubKey, EVP_PKEY_Ptr localPrivKey,
+                        const std::vector<uint8_t>& localPublicKey) {
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
+        string ZabFromKeyMintStr;
+        ASSERT_EQ(ErrorCode::OK,
+                  Finish(string(localPublicKey.begin(), localPublicKey.end()), &ZabFromKeyMintStr));
+        vector<uint8_t> ZabFromKeyMint(ZabFromKeyMintStr.begin(), ZabFromKeyMintStr.end());
+        vector<uint8_t> ZabFromTest;
+
+        if (EVP_PKEY_id(kmPubKey.get()) == EVP_PKEY_X25519) {
+            size_t kmPubKeySize = 32;
+            uint8_t kmPubKeyData[32];
+            ASSERT_EQ(1, EVP_PKEY_get_raw_public_key(kmPubKey.get(), kmPubKeyData, &kmPubKeySize));
+            ASSERT_EQ(kmPubKeySize, 32);
+
+            uint8_t localPrivKeyData[32];
+            size_t localPrivKeySize = 32;
+            ASSERT_EQ(1, EVP_PKEY_get_raw_private_key(localPrivKey.get(), localPrivKeyData,
+                                                      &localPrivKeySize));
+            ASSERT_EQ(localPrivKeySize, 32);
+
+            uint8_t sharedKey[32];
+            ASSERT_EQ(1, X25519(sharedKey, localPrivKeyData, kmPubKeyData));
+            ZabFromTest = std::vector<uint8_t>(sharedKey, sharedKey + 32);
+        } else {
+            // Perform local ECDH between the two keys so we can check if we get the same Zab..
+            auto ctx = EVP_PKEY_CTX_Ptr(EVP_PKEY_CTX_new(localPrivKey.get(), nullptr));
+            ASSERT_NE(ctx, nullptr);
+            ASSERT_EQ(EVP_PKEY_derive_init(ctx.get()), 1);
+            ASSERT_EQ(EVP_PKEY_derive_set_peer(ctx.get(), kmPubKey.get()), 1);
+            size_t ZabFromTestLen = 0;
+            ASSERT_EQ(EVP_PKEY_derive(ctx.get(), nullptr, &ZabFromTestLen), 1);
+            ZabFromTest.resize(ZabFromTestLen);
+            ASSERT_EQ(EVP_PKEY_derive(ctx.get(), ZabFromTest.data(), &ZabFromTestLen), 1);
+        }
+        EXPECT_EQ(ZabFromKeyMint, ZabFromTest);
+    }
+};
+
 /*
  * KeyAgreementTest.Ecdh
  *
- * Verifies that ECDH works for all curves
+ * Verifies that ECDH works for all required curves
  */
 TEST_P(KeyAgreementTest, Ecdh) {
     // Because it's possible to use this API with keys on different curves, we
@@ -6689,49 +7301,13 @@
     for (auto curve : ValidCurves()) {
         for (auto localCurve : ValidCurves()) {
             // Generate EC key locally (with access to private key material)
-            auto ecKey = EC_KEY_Ptr(EC_KEY_new());
-            int curveName = EcdhCurveToOpenSslCurveName(localCurve);
-            auto group = EC_GROUP_Ptr(EC_GROUP_new_by_curve_name(curveName));
-            ASSERT_NE(group, nullptr);
-            ASSERT_EQ(EC_KEY_set_group(ecKey.get(), group.get()), 1);
-            ASSERT_EQ(EC_KEY_generate_key(ecKey.get()), 1);
-            auto pkey = EVP_PKEY_Ptr(EVP_PKEY_new());
-            ASSERT_EQ(EVP_PKEY_set1_EC_KEY(pkey.get(), ecKey.get()), 1);
-
-            // Get encoded form of the public part of the locally generated key...
-            unsigned char* p = nullptr;
-            int encodedPublicKeySize = i2d_PUBKEY(pkey.get(), &p);
-            ASSERT_GT(encodedPublicKeySize, 0);
-            vector<uint8_t> encodedPublicKey(
-                    reinterpret_cast<const uint8_t*>(p),
-                    reinterpret_cast<const uint8_t*>(p + encodedPublicKeySize));
-            OPENSSL_free(p);
+            EVP_PKEY_Ptr localPrivKey;
+            vector<uint8_t> localPublicKey;
+            GenerateLocalEcKey(localCurve, &localPrivKey, &localPublicKey);
 
             // Generate EC key in KeyMint (only access to public key material)
-            vector<uint8_t> challenge = {0x41, 0x42};
-            EXPECT_EQ(
-                    ErrorCode::OK,
-                    GenerateKey(AuthorizationSetBuilder()
-                                        .Authorization(TAG_NO_AUTH_REQUIRED)
-                                        .Authorization(TAG_EC_CURVE, curve)
-                                        .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
-                                        .Authorization(TAG_ALGORITHM, Algorithm::EC)
-                                        .Authorization(TAG_ATTESTATION_APPLICATION_ID, {0x61, 0x62})
-                                        .Authorization(TAG_ATTESTATION_CHALLENGE, challenge)
-                                        .SetDefaultValidity()))
-                    << "Failed to generate key";
-            ASSERT_GT(cert_chain_.size(), 0);
-            X509_Ptr kmKeyCert(parse_cert_blob(cert_chain_[0].encodedCertificate));
-            ASSERT_NE(kmKeyCert, nullptr);
-            // Check that keyAgreement (bit 4) is set in KeyUsage
-            EXPECT_TRUE((X509_get_key_usage(kmKeyCert.get()) & X509v3_KU_KEY_AGREEMENT) != 0);
-            auto kmPkey = EVP_PKEY_Ptr(X509_get_pubkey(kmKeyCert.get()));
-            ASSERT_NE(kmPkey, nullptr);
-            if (dump_Attestations) {
-                for (size_t n = 0; n < cert_chain_.size(); n++) {
-                    std::cout << bin2hex(cert_chain_[n].encodedCertificate) << std::endl;
-                }
-            }
+            EVP_PKEY_Ptr kmPubKey;
+            GenerateKeyMintEcKey(curve, &kmPubKey);
 
             // Now that we have the two keys, we ask KeyMint to perform ECDH...
             if (curve != localCurve) {
@@ -6740,30 +7316,12 @@
                 EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
                 string ZabFromKeyMintStr;
                 EXPECT_EQ(ErrorCode::INVALID_ARGUMENT,
-                          Finish(string(encodedPublicKey.begin(), encodedPublicKey.end()),
+                          Finish(string(localPublicKey.begin(), localPublicKey.end()),
                                  &ZabFromKeyMintStr));
 
             } else {
                 // Otherwise if the keys are using the same curve, it should work.
-                EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
-                string ZabFromKeyMintStr;
-                EXPECT_EQ(ErrorCode::OK,
-                          Finish(string(encodedPublicKey.begin(), encodedPublicKey.end()),
-                                 &ZabFromKeyMintStr));
-                vector<uint8_t> ZabFromKeyMint(ZabFromKeyMintStr.begin(), ZabFromKeyMintStr.end());
-
-                // Perform local ECDH between the two keys so we can check if we get the same Zab..
-                auto ctx = EVP_PKEY_CTX_Ptr(EVP_PKEY_CTX_new(pkey.get(), nullptr));
-                ASSERT_NE(ctx, nullptr);
-                ASSERT_EQ(EVP_PKEY_derive_init(ctx.get()), 1);
-                ASSERT_EQ(EVP_PKEY_derive_set_peer(ctx.get(), kmPkey.get()), 1);
-                size_t ZabFromTestLen = 0;
-                ASSERT_EQ(EVP_PKEY_derive(ctx.get(), nullptr, &ZabFromTestLen), 1);
-                vector<uint8_t> ZabFromTest;
-                ZabFromTest.resize(ZabFromTestLen);
-                ASSERT_EQ(EVP_PKEY_derive(ctx.get(), ZabFromTest.data(), &ZabFromTestLen), 1);
-
-                EXPECT_EQ(ZabFromKeyMint, ZabFromTest);
+                CheckAgreement(std::move(kmPubKey), std::move(localPrivKey), localPublicKey);
             }
 
             CheckedDeleteKey();
@@ -6771,6 +7329,140 @@
     }
 }
 
+/*
+ * KeyAgreementTest.EcdhCurve25519
+ *
+ * Verifies that ECDH works for curve25519. This is also covered by the general
+ * KeyAgreementTest.Ecdh case, but is pulled out separately here because this curve was added after
+ * KeyMint 1.0.
+ */
+TEST_P(KeyAgreementTest, EcdhCurve25519) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    // Generate EC key in KeyMint (only access to public key material)
+    EcCurve curve = EcCurve::CURVE_25519;
+    EVP_PKEY_Ptr kmPubKey = nullptr;
+    GenerateKeyMintEcKey(curve, &kmPubKey);
+
+    // Generate EC key on same curve locally (with access to private key material).
+    EVP_PKEY_Ptr privKey;
+    vector<uint8_t> encodedPublicKey;
+    GenerateLocalEcKey(curve, &privKey, &encodedPublicKey);
+
+    // Agree on a key between local and KeyMint and check it.
+    CheckAgreement(std::move(kmPubKey), std::move(privKey), encodedPublicKey);
+
+    CheckedDeleteKey();
+}
+
+/*
+ * KeyAgreementTest.EcdhCurve25519Imported
+ *
+ * Verifies that ECDH works for an imported curve25519 key.
+ */
+TEST_P(KeyAgreementTest, EcdhCurve25519Imported) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    // Import x25519 key into KeyMint.
+    EcCurve curve = EcCurve::CURVE_25519;
+    ASSERT_EQ(ErrorCode::OK, ImportKey(AuthorizationSetBuilder()
+                                               .Authorization(TAG_NO_AUTH_REQUIRED)
+                                               .EcdsaKey(EcCurve::CURVE_25519)
+                                               .Authorization(TAG_PURPOSE, KeyPurpose::AGREE_KEY)
+                                               .SetDefaultValidity(),
+                                       KeyFormat::PKCS8, x25519_pkcs8_key));
+    ASSERT_GT(cert_chain_.size(), 0);
+    X509_Ptr kmKeyCert(parse_cert_blob(cert_chain_[0].encodedCertificate));
+    ASSERT_NE(kmKeyCert, nullptr);
+    EVP_PKEY_Ptr kmPubKey(X509_get_pubkey(kmKeyCert.get()));
+    ASSERT_NE(kmPubKey.get(), nullptr);
+
+    // Expect the import to emit corresponding public key data.
+    size_t kmPubKeySize = 32;
+    uint8_t kmPubKeyData[32];
+    ASSERT_EQ(1, EVP_PKEY_get_raw_public_key(kmPubKey.get(), kmPubKeyData, &kmPubKeySize));
+    ASSERT_EQ(kmPubKeySize, 32);
+    EXPECT_EQ(bin2hex(std::vector<uint8_t>(kmPubKeyData, kmPubKeyData + 32)),
+              bin2hex(std::vector<uint8_t>(x25519_pubkey.begin(), x25519_pubkey.end())));
+
+    // Generate EC key on same curve locally (with access to private key material).
+    EVP_PKEY_Ptr privKey;
+    vector<uint8_t> encodedPublicKey;
+    GenerateLocalEcKey(curve, &privKey, &encodedPublicKey);
+
+    // Agree on a key between local and KeyMint and check it.
+    CheckAgreement(std::move(kmPubKey), std::move(privKey), encodedPublicKey);
+
+    CheckedDeleteKey();
+}
+
+/*
+ * KeyAgreementTest.EcdhCurve25519InvalidSize
+ *
+ * Verifies that ECDH fails for curve25519 if the wrong size of public key is provided.
+ */
+TEST_P(KeyAgreementTest, EcdhCurve25519InvalidSize) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    // Generate EC key in KeyMint (only access to public key material)
+    EcCurve curve = EcCurve::CURVE_25519;
+    EVP_PKEY_Ptr kmPubKey = nullptr;
+    GenerateKeyMintEcKey(curve, &kmPubKey);
+
+    // Generate EC key on same curve locally (with access to private key material).
+    EVP_PKEY_Ptr privKey;
+    vector<uint8_t> encodedPublicKey;
+    GenerateLocalEcKey(curve, &privKey, &encodedPublicKey);
+
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
+    string ZabFromKeyMintStr;
+    // Send in an incomplete public key.
+    ASSERT_NE(ErrorCode::OK, Finish(string(encodedPublicKey.begin(), encodedPublicKey.end() - 1),
+                                    &ZabFromKeyMintStr));
+
+    CheckedDeleteKey();
+}
+
+/*
+ * KeyAgreementTest.EcdhCurve25519Mismatch
+ *
+ * Verifies that ECDH fails between curve25519 and other curves.
+ */
+TEST_P(KeyAgreementTest, EcdhCurve25519Mismatch) {
+    if (!Curve25519Supported()) {
+        GTEST_SKIP() << "Test not applicable to device that is not expected to support curve 25519";
+    }
+
+    // Generate EC key in KeyMint (only access to public key material)
+    EcCurve curve = EcCurve::CURVE_25519;
+    EVP_PKEY_Ptr kmPubKey = nullptr;
+    GenerateKeyMintEcKey(curve, &kmPubKey);
+
+    for (auto localCurve : ValidCurves()) {
+        if (localCurve == curve) {
+            continue;
+        }
+        // Generate EC key on a different curve locally (with access to private key material).
+        EVP_PKEY_Ptr privKey;
+        vector<uint8_t> encodedPublicKey;
+        GenerateLocalEcKey(localCurve, &privKey, &encodedPublicKey);
+
+        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
+        string ZabFromKeyMintStr;
+        EXPECT_EQ(ErrorCode::INVALID_ARGUMENT,
+                  Finish(string(encodedPublicKey.begin(), encodedPublicKey.end()),
+                         &ZabFromKeyMintStr));
+    }
+
+    CheckedDeleteKey();
+}
+
 INSTANTIATE_KEYMINT_AIDL_TEST(KeyAgreementTest);
 
 using DestroyAttestationIdsTest = KeyMintAidlTestBase;