Convert audio HAL service mk to bp and rename the service
am: ad17f58e50
Change-Id: I3eb65e5e98e94e5ecb6d8e9ee00836b9c03c069e
diff --git a/CleanSpec.mk b/CleanSpec.mk
index 690d92f..76594fb 100644
--- a/CleanSpec.mk
+++ b/CleanSpec.mk
@@ -80,6 +80,7 @@
$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/android.hardware.configstore@1.2.so)
$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-Q/android.hardware.configstore@1.2.so)
$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/android.hardware.configstore@1.2.so)
+$(call add-clean-step, rm -f $(PRODUCT_OUT)/etc/init/android.hardware.audio@2.0-service.rc $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.audio@2.0-service)
$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.cas@1.1*)
$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.cas@1.1*)
$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.cas@1.1*)
diff --git a/audio/common/all-versions/default/service/Android.bp b/audio/common/all-versions/default/service/Android.bp
new file mode 100644
index 0000000..f5a6f42
--- /dev/null
+++ b/audio/common/all-versions/default/service/Android.bp
@@ -0,0 +1,48 @@
+cc_binary {
+ name: "android.hardware.audio.service",
+
+ init_rc: ["android.hardware.audio.service.rc"],
+ relative_install_path: "hw",
+ vendor: true,
+ // Only support 32 bit as the binary must always be installed at the same
+ // location for init to start it and the build system does not support
+ // having two binaries installable to the same location even if they are
+ // not installed in the same build.
+ compile_multilib: "32",
+ srcs: ["service.cpp"],
+
+ cflags: [
+ "-Wall",
+ "-Wextra",
+ "-Werror",
+ ],
+
+ shared_libs: [
+ "libcutils",
+ "libbinder",
+ "libhidlbase",
+ "liblog",
+ "libutils",
+ "libhardware",
+ "android.hardware.audio@2.0",
+ "android.hardware.audio@4.0",
+ "android.hardware.audio@5.0",
+ "android.hardware.audio.common@2.0",
+ "android.hardware.audio.common@4.0",
+ "android.hardware.audio.common@5.0",
+ "android.hardware.audio.effect@2.0",
+ "android.hardware.audio.effect@4.0",
+ "android.hardware.audio.effect@5.0",
+ "android.hardware.bluetooth.a2dp@1.0",
+ "android.hardware.bluetooth.audio@2.0",
+ "android.hardware.soundtrigger@2.0",
+ "android.hardware.soundtrigger@2.1",
+ "android.hardware.soundtrigger@2.2",
+ ],
+}
+
+// Legacy service name, use android.hardware.audio.service instead
+phony {
+ name: "android.hardware.audio@2.0-service",
+ required: ["android.hardware.audio.service"],
+}
diff --git a/audio/common/all-versions/default/service/Android.mk b/audio/common/all-versions/default/service/Android.mk
deleted file mode 100644
index 236f1fd..0000000
--- a/audio/common/all-versions/default/service/Android.mk
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# Copyright (C) 2016 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-LOCAL_PATH := $(call my-dir)
-
-#
-# Service
-#
-
-include $(CLEAR_VARS)
-LOCAL_MODULE := android.hardware.audio@2.0-service
-LOCAL_INIT_RC := android.hardware.audio@2.0-service.rc
-LOCAL_MODULE_RELATIVE_PATH := hw
-LOCAL_PROPRIETARY_MODULE := true
-LOCAL_SRC_FILES := \
- service.cpp
-
-LOCAL_CFLAGS := -Wall -Werror
-
-LOCAL_SHARED_LIBRARIES := \
- libcutils \
- libbinder \
- libhidlbase \
- liblog \
- libutils \
- libhardware \
- android.hardware.audio@2.0 \
- android.hardware.audio@4.0 \
- android.hardware.audio@5.0 \
- android.hardware.audio.common@2.0 \
- android.hardware.audio.common@4.0 \
- android.hardware.audio.common@5.0 \
- android.hardware.audio.effect@2.0 \
- android.hardware.audio.effect@4.0 \
- android.hardware.audio.effect@5.0 \
- android.hardware.bluetooth.a2dp@1.0 \
- android.hardware.bluetooth.audio@2.0 \
- android.hardware.soundtrigger@2.0 \
- android.hardware.soundtrigger@2.1 \
- android.hardware.soundtrigger@2.2
-
-# Can not switch to Android.bp until AUDIOSERVER_MULTILIB
-# is deprecated as build config variable are not supported
-ifeq ($(strip $(AUDIOSERVER_MULTILIB)),)
-LOCAL_MULTILIB := 32
-else
-LOCAL_MULTILIB := $(AUDIOSERVER_MULTILIB)
-endif
-
-include $(BUILD_EXECUTABLE)
diff --git a/audio/common/all-versions/default/service/android.hardware.audio@2.0-service.rc b/audio/common/all-versions/default/service/android.hardware.audio.service.rc
similarity index 81%
rename from audio/common/all-versions/default/service/android.hardware.audio@2.0-service.rc
rename to audio/common/all-versions/default/service/android.hardware.audio.service.rc
index 72b4d19..63d2542 100644
--- a/audio/common/all-versions/default/service/android.hardware.audio@2.0-service.rc
+++ b/audio/common/all-versions/default/service/android.hardware.audio.service.rc
@@ -1,4 +1,4 @@
-service vendor.audio-hal-2-0 /vendor/bin/hw/android.hardware.audio@2.0-service
+service vendor.audio-hal /vendor/bin/hw/android.hardware.audio.service
class hal
user audioserver
# media gid needed for /dev/fm (radio) and for /data/misc/media (tee)