diff --git a/audio/aidl/Android.bp b/audio/aidl/Android.bp
index 0b5b993..7db50d5 100644
--- a/audio/aidl/Android.bp
+++ b/audio/aidl/Android.bp
@@ -49,9 +49,6 @@
             ],
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
             apex_available: [
                 "//apex_available:platform",
                 "com.android.bluetooth",
@@ -67,3 +64,31 @@
     ],
 
 }
+
+aidl_interface {
+    name: "android.hardware.audio.core",
+    vendor_available: true,
+    srcs: [
+        "android/hardware/audio/core/AudioPatch.aidl",
+        "android/hardware/audio/core/AudioRoute.aidl",
+        "android/hardware/audio/core/IConfig.aidl",
+        "android/hardware/audio/core/IModule.aidl",
+        "android/hardware/audio/core/IStreamIn.aidl",
+        "android/hardware/audio/core/IStreamOut.aidl",
+        "android/hardware/audio/core/ModuleDebug.aidl",
+    ],
+    imports: [
+        "android.hardware.audio.common-V1",
+        "android.media.audio.common.types-V1",
+    ],
+    stability: "vintf",
+    backend: {
+        // The C++ backend is disabled transitively due to use of FMQ.
+        cpp: {
+            enabled: false,
+        },
+        java: {
+            platform_apis: true,
+        },
+    },
+}
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/AudioPatch.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/AudioPatch.aidl
new file mode 100644
index 0000000..1cef4cd
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/AudioPatch.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@JavaDerive(equals=true, toString=true) @VintfStability
+parcelable AudioPatch {
+  int id;
+  int[] sourcePortConfigIds;
+  int[] sinkPortConfigIds;
+}
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/AudioRoute.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/AudioRoute.aidl
new file mode 100644
index 0000000..deeef87
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/AudioRoute.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@JavaDerive(equals=true, toString=true) @VintfStability
+parcelable AudioRoute {
+  int[] sourcePortIds;
+  int sinkPortId;
+  boolean isExclusive;
+}
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IConfig.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IConfig.aidl
new file mode 100644
index 0000000..fd80715
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IConfig.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@VintfStability
+interface IConfig {
+}
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IModule.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IModule.aidl
new file mode 100644
index 0000000..f8bc2c7
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IModule.aidl
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@VintfStability
+interface IModule {
+  void setModuleDebug(in android.hardware.audio.core.ModuleDebug debug);
+  android.media.audio.common.AudioPort connectExternalDevice(in android.media.audio.common.AudioPort templateIdAndAdditionalData);
+  void disconnectExternalDevice(int portId);
+  android.hardware.audio.core.AudioPatch[] getAudioPatches();
+  android.media.audio.common.AudioPort getAudioPort(int portId);
+  android.media.audio.common.AudioPortConfig[] getAudioPortConfigs();
+  android.media.audio.common.AudioPort[] getAudioPorts();
+  android.hardware.audio.core.AudioRoute[] getAudioRoutes();
+  android.hardware.audio.core.AudioRoute[] getAudioRoutesForAudioPort(int portId);
+  android.hardware.audio.core.IStreamIn openInputStream(int portConfigId, in android.hardware.audio.common.SinkMetadata sinkMetadata);
+  android.hardware.audio.core.IStreamOut openOutputStream(int portConfigId, in android.hardware.audio.common.SourceMetadata sourceMetadata, in @nullable android.media.audio.common.AudioOffloadInfo offloadInfo);
+  android.hardware.audio.core.AudioPatch setAudioPatch(in android.hardware.audio.core.AudioPatch requested);
+  boolean setAudioPortConfig(in android.media.audio.common.AudioPortConfig requested, out android.media.audio.common.AudioPortConfig suggested);
+  void resetAudioPatch(int patchId);
+  void resetAudioPortConfig(int portConfigId);
+}
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IStreamIn.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IStreamIn.aidl
new file mode 100644
index 0000000..d5ab3e8
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IStreamIn.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@VintfStability
+interface IStreamIn {
+  void close();
+  void updateMetadata(in android.hardware.audio.common.SinkMetadata sinkMetadata);
+}
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IStreamOut.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IStreamOut.aidl
new file mode 100644
index 0000000..3021d94
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/IStreamOut.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@VintfStability
+interface IStreamOut {
+  void close();
+  void updateMetadata(in android.hardware.audio.common.SourceMetadata sourceMetadata);
+}
diff --git a/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/ModuleDebug.aidl b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/ModuleDebug.aidl
new file mode 100644
index 0000000..80ee185
--- /dev/null
+++ b/audio/aidl/aidl_api/android.hardware.audio.core/current/android/hardware/audio/core/ModuleDebug.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.audio.core;
+@JavaDerive(equals=true, toString=true) @VintfStability
+parcelable ModuleDebug {
+  boolean simulateDeviceConnections;
+}
diff --git a/audio/aidl/android/hardware/audio/core/AudioPatch.aidl b/audio/aidl/android/hardware/audio/core/AudioPatch.aidl
new file mode 100644
index 0000000..48ca214
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/AudioPatch.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+/**
+ * Audio patch specifies a connection between multiple audio port
+ * configurations.
+ */
+@JavaDerive(equals=true, toString=true)
+@VintfStability
+parcelable AudioPatch {
+    /** The ID of the patch, unique within the HAL module. */
+    int id;
+    /**
+     * The list of IDs of source audio port configs ('AudioPortConfig.id').
+     * There must be at least one source in a valid patch and all IDs must be
+     * unique.
+     */
+    int[] sourcePortConfigIds;
+    /**
+     * The list of IDs of sink audio port configs ('AudioPortConfig.id').
+     * There must be at least one sink in a valid patch and all IDs must be
+     * unique.
+     */
+    int[] sinkPortConfigIds;
+}
diff --git a/audio/aidl/android/hardware/audio/core/AudioRoute.aidl b/audio/aidl/android/hardware/audio/core/AudioRoute.aidl
new file mode 100644
index 0000000..1e7b441
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/AudioRoute.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+/**
+ * Audio route specifies a path from multiple audio source ports to one audio
+ * sink port. As an example, when emitting audio output, source ports typically
+ * are mix ports (audio data from the framework), the sink is a device
+ * port. When acquiring audio, source ports are device ports, the sink is a mix
+ * port.
+ */
+@JavaDerive(equals=true, toString=true)
+@VintfStability
+parcelable AudioRoute {
+    /**
+     * The list of IDs of source audio ports ('AudioPort.id').
+     * There must be at least one source in a valid route and all IDs must be
+     * unique.
+     */
+    int[] sourcePortIds;
+    /** The ID of the sink audio port ('AudioPort.id'). */
+    int sinkPortId;
+    /** If set, only one source can be active, mixing is not supported. */
+    boolean isExclusive;
+}
diff --git a/audio/aidl/android/hardware/audio/core/IConfig.aidl b/audio/aidl/android/hardware/audio/core/IConfig.aidl
new file mode 100644
index 0000000..c7bb414
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/IConfig.aidl
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+/**
+ * This interface provides system-wide configuration parameters for audio I/O
+ * (by "system" here we mean the device running Android).
+ */
+@VintfStability
+interface IConfig {}
diff --git a/audio/aidl/android/hardware/audio/core/IModule.aidl b/audio/aidl/android/hardware/audio/core/IModule.aidl
new file mode 100644
index 0000000..802cb2f
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/IModule.aidl
@@ -0,0 +1,408 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+import android.hardware.audio.common.SinkMetadata;
+import android.hardware.audio.common.SourceMetadata;
+import android.hardware.audio.core.AudioPatch;
+import android.hardware.audio.core.AudioRoute;
+import android.hardware.audio.core.IStreamIn;
+import android.hardware.audio.core.IStreamOut;
+import android.hardware.audio.core.ModuleDebug;
+import android.media.audio.common.AudioOffloadInfo;
+import android.media.audio.common.AudioPort;
+import android.media.audio.common.AudioPortConfig;
+
+/**
+ * Each instance of IModule corresponds to a separate audio module. The system
+ * (the term "system" as used here applies to the entire device running Android)
+ * may have multiple modules due to the physical architecture, for example, it
+ * can have multiple DSPs or other audio I/O units which are not interconnected
+ * in hardware directly. Usually there is at least one audio module which is
+ * responsible for the "main" (or "built-in") audio functionality of the
+ * system. Even if the system lacks any physical audio I/O capabilities, there
+ * will be a "null" audio module.
+ *
+ * On a typical mobile phone there is usually a main DSP module which handles
+ * most of the phone's audio I/O via the built-in speakers and microphones. USB
+ * audio can exist as a separate module. Some audio modules can be implemented
+ * purely in software, for example, the remote submix module.
+ */
+@VintfStability
+interface IModule {
+    /**
+     * Sets debugging configuration for the HAL module. This method is only
+     * called during xTS testing and is intended for validating the aspects of
+     * the HAL module behavior that would otherwise require human intervention.
+     *
+     * The HAL module must throw an error if there is an attempt to change
+     * the debug behavior for the aspect which is currently in use.
+     *
+     * @param debug The debug options.
+     * @throws EX_ILLEGAL_STATE If the flag(s) being changed affect functionality
+     *                          which is currently in use.
+     */
+    void setModuleDebug(in ModuleDebug debug);
+
+    /**
+     * Set a device port of an external device into connected state.
+     *
+     * This method is used to inform the HAL module that an external device has
+     * been connected to a device port selected using the 'id' field of the
+     * input AudioPort parameter. This device port must have dynamic profiles
+     * (an empty list of profiles). This port is further referenced to as "port
+     * template" because it acts as a template for creating a new instance of a
+     * "connected" device port which gets returned from this method.
+     *
+     * The input AudioPort parameter may contain any additional data obtained by
+     * the system side from other subsystems. The nature of data depends on the
+     * type of the connection. For example, for point-to-multipoint external
+     * device connections, the input parameter may contain the address of the
+     * connected external device. Another example is EDID information for HDMI
+     * connections (ExtraAudioDescriptor), which can be provided by the HDMI-CEC
+     * HAL module.
+     *
+     * It is the responsibility of the HAL module to query audio profiles
+     * supported by the connected device and return them as part of the returned
+     * AudioPort instance. In the case when the HAL is unable to query the
+     * external device, an error must be thrown.
+     *
+     * Thus, the returned audio port instance is the result of combining the
+     * following information:
+     *  - a unique port ID generated by the HAL module;
+     *  - static information from the port template;
+     *  - list of audio profiles supported by the connected device;
+     *  - additional data from the input AudioPort parameter.
+     *
+     * The HAL module must also update the list of audio routes to include the
+     * ID of the instantiated connected device port. Normally, the connected
+     * port allows the same routing as the port template.
+     *
+     * Also see notes on 'ModuleDebug.simulateDeviceConnections'.
+     *
+     * The following protocol is used by HAL module client for handling
+     * connection of an external device:
+     *  1. Obtain the list of device ports and their IDs via 'getAudioPorts'
+     *     method. Select the appropriate port template using
+     *     AudioDeviceDescription ('ext.device' field of AudioPort).
+     *  2. Combine the ID of the port template with any additional data and call
+     *     'connectExternalDevice'. The HAL module returns a new instance of
+     *     AudioPort created using the rules explained above. Both
+     *     'getAudioPort' and 'getAudioPorts' methods will be returning the same
+     *     information for this port until disconnection.
+     *  3. Configure the connected port with one of supported profiles using
+     *     'setAudioPortConfig'.
+     *  4. Query the list of AudioRoutes for the new AudioPort using
+     *     'getAudioRoutesForAudioPort' or 'getAudioRoutes' methods.
+     *
+     * External devices are distinguished by the connection type and device
+     * address. Calling this method multiple times to inform about connection of
+     * the same external device without disconnecting it first is an error.
+     *
+     * The HAL module must perform validation of the input parameter and throw
+     * an error if it is lacking required information, for example, when no
+     * device address is specified for a point-to-multipoint external device
+     * connection.
+     *
+     * Handling of a disconnect is done in a reverse order:
+     *  1. Reset port configuration using the 'resetAudioPortConfig' method.
+     *  2. Release the connected device port by calling the 'disconnectExternalDevice'
+     *     method. This also removes the audio routes associated with this
+     *     device port.
+     *
+     * @return New instance of an audio port for the connected external device.
+     * @param templateIdAndAdditionalData Specifies port template ID and any
+     *                                    additional data.
+     * @throws EX_ILLEGAL_ARGUMENT In the following cases:
+     *                             - If the template port can not be found by the ID.
+     *                             - If the template is not a device port, or
+     *                               it does not have dynamic profiles.
+     *                             - If the input parameter is lacking required
+     *                               information.
+     * @throws EX_ILLEGAL_STATE In the following cases:
+     *                          - If the HAL module is unable to query audio profiles.
+     *                          - If the external device has already been connected.
+     */
+    AudioPort connectExternalDevice(in AudioPort templateIdAndAdditionalData);
+
+    /**
+     * Set a device port of a an external device into disconnected state.
+     *
+     * This method is used to inform the HAL module that an external device has
+     * been disconnected. The 'portId' must be of a connected device port
+     * instance previously instantiated using the 'connectExternalDevice'
+     * method.
+     *
+     * @throws EX_ILLEGAL_ARGUMENT In the following cases:
+     *                             - If the port can not be found by the ID.
+     *                             - If this is not a connected device port.
+     * @throws EX_ILLEGAL_STATE If the port has active configurations.
+     */
+    void disconnectExternalDevice(int portId);
+
+    /**
+     * Return all audio patches of this module.
+     *
+     * Returns a list of audio patches, that is, established connections between
+     * audio port configurations.
+     *
+     * @return The list of audio patches.
+     */
+    AudioPatch[] getAudioPatches();
+
+    /**
+     * Return the current state of the audio port.
+     *
+     * Using the port ID provided on input, returns the current state of the
+     * audio port. The values of the AudioPort structure must be the same as
+     * currently returned by the 'getAudioPorts' method. The 'getAudioPort'
+     * method is provided to reduce overhead in the case when the client needs
+     * to check the state of one port only.
+     *
+     * @return The current state of an audio port.
+     * @param portId The ID of the audio port.
+     * @throws EX_ILLEGAL_ARGUMENT If the port can not be found by the ID.
+     */
+    AudioPort getAudioPort(int portId);
+
+    /**
+     * Return all active audio port configurations of this module.
+     *
+     * Returns a list of active configurations that are currently set for mix
+     * ports and device ports. Each returned configuration must have an unique
+     * ID within this module ('AudioPortConfig.id' field), which can coincide
+     * with an ID of an audio port, if the port only supports a single active
+     * configuration. Each returned configuration must also have a reference to
+     * an existing port ('AudioPortConfig.portId' field). All optional
+     * (nullable) fields of the configurations must be initialized by the HAL
+     * module.
+     *
+     * @return The list of active audio port configurations.
+     */
+    AudioPortConfig[] getAudioPortConfigs();
+
+    /**
+     * Return the current state of all audio ports provided by this module.
+     *
+     * Returns a list of all mix ports and device ports provided by this HAL
+     * module, reflecting their current states. Each returned port must have a
+     * unique ID within this module ('AudioPort.id' field). The list also
+     * includes "connected" ports created using 'connectExternalDevice' method.
+     *
+     * @return The list of audio ports.
+     */
+    AudioPort[] getAudioPorts();
+
+    /**
+     * Return all current audio routes of this module.
+     *
+     * Returns the current list of audio routes, that is, allowed connections
+     * between audio ports. The list can change when new device audio ports
+     * get created as a result of connecting or disconnecting of external
+     * devices.
+     *
+     * @return The list of audio routes.
+     */
+    AudioRoute[] getAudioRoutes();
+
+    /**
+     * Return audio routes related to the specified audio port.
+     *
+     * Returns the list of audio routes that include the specified port ID
+     * as a source or as a sink. The returned list is a subset of the result
+     * returned by the 'getAudioRoutes' method, filtered by the port ID.
+     * An empty list can be returned, indicating that the audio port can not
+     * be used for creating audio patches.
+     *
+     * @return The list of audio routes.
+     * @param portId The ID of the audio port.
+     * @throws EX_ILLEGAL_ARGUMENT If the port can not be found by the ID.
+     */
+    AudioRoute[] getAudioRoutesForAudioPort(int portId);
+
+    /**
+     * Open an input stream using an existing audio mix port configuration.
+     *
+     * The audio port configuration ID must be obtained by calling
+     * 'setAudioPortConfig' method. Existence of an audio patch involving this
+     * port configuration is not required for successful opening of a stream.
+     *
+     * Only one stream is allowed per audio port configuration. HAL module can
+     * also set a limit on how many output streams can be opened for a particular
+     * mix port by using its 'AudioPortMixExt.maxOpenStreamCount' field.
+     *
+     * @return An opened input stream.
+     * @param portConfigId The ID of the audio mix port config.
+     * @param sinkMetadata Description of the audio that will be recorded.
+     * @throws EX_ILLEGAL_ARGUMENT In the following cases:
+     *                             - If the port config can not be found by the ID.
+     *                             - If the port config is not of an input mix port.
+     * @throws EX_ILLEGAL_STATE In the following cases:
+     *                          - If the port config already has a stream opened on it.
+     *                          - If the limit on the open stream count for the port has
+     *                            been reached.
+     */
+    IStreamIn openInputStream(int portConfigId, in SinkMetadata sinkMetadata);
+
+    /**
+     * Open an output stream using an existing audio mix port configuration.
+     *
+     * The audio port configuration ID must be obtained by calling
+     * 'setAudioPortConfig' method. Existence of an audio patch involving this
+     * port configuration is not required for successful opening of a stream.
+     *
+     * If the port configuration has 'COMPRESS_OFFLOAD' output flag set,
+     * the framework must provide additional information about the encoded
+     * audio stream in 'offloadInfo' argument.
+     *
+     * Only one stream is allowed per audio port configuration. HAL module can
+     * also set a limit on how many output streams can be opened for a particular
+     * mix port by using its 'AudioPortMixExt.maxOpenStreamCount' field.
+     * Only one stream can be opened on the audio port with 'PRIMARY' output
+     * flag. This rule can not be overridden with 'maxOpenStreamCount' field.
+     *
+     * @return An opened output stream.
+     * @param portConfigId The ID of the audio mix port config.
+     * @param sourceMetadata Description of the audio that will be played.
+     * @param offloadInfo Additional information for offloaded playback.
+     * @throws EX_ILLEGAL_ARGUMENT In the following cases:
+     *                             - If the port config can not be found by the ID.
+     *                             - If the port config is not of an output mix port.
+     *                             - If the offload info is not provided for an offload
+     *                               port configuration.
+     * @throws EX_ILLEGAL_STATE In the following cases:
+     *                          - If the port config already has a stream opened on it.
+     *                          - If the limit on the open stream count for the port has
+     *                            been reached.
+     *                          - If another opened stream already exists for the 'PRIMARY'
+     *                            output port.
+     */
+    IStreamOut openOutputStream(int portConfigId, in SourceMetadata sourceMetadata,
+            in @nullable AudioOffloadInfo offloadInfo);
+
+    /**
+     * Set an audio patch.
+     *
+     * This method creates new or updates an existing audio patch. If the
+     * requested audio patch does not have a specified id, then a new patch is
+     * created and an ID is allocated for it by the HAL module. Otherwise an
+     * attempt to update an existing patch is made. It is recommended that
+     * updating of an existing audio patch should be performed by the HAL module
+     * in a way that does not interrupt active audio streams involving audio
+     * port configurations of the patch. If the HAL module is unable to avoid
+     * interruption when updating a certain patch, it is permitted to allocate a
+     * new patch ID for the result. The returned audio patch contains all the
+     * information about the new or updated audio patch.
+     *
+     * Audio port configurations specified in the patch must be obtained by
+     * calling 'setAudioPortConfig' method. There must be an audio route which
+     * allows connection between the audio ports whose configurations are used.
+     * An audio patch may be created before or after an audio steam is created
+     * for this configuration.
+     *
+     * @return Resulting audio patch.
+     * @param requested Requested audio patch.
+     * @throws EX_ILLEGAL_ARGUMENT In the following cases:
+     *                             - If the patch is invalid (see AudioPatch).
+     *                             - If a port config can not be found from the specified IDs.
+     *                             - If there are no routes satisfying the patch.
+     *                             - If an existing patch can not be found by the ID.
+     * @throws EX_ILLEGAL_STATE In the following cases:
+     *                          - If application of the patch can only use a route with an
+     *                            exclusive use the sink port, and it is already patched.
+     * @throws EX_UNSUPPORTED_OPERATION If the patch can not be established because
+     *                                  the HAL module does not support this otherwise valid
+     *                                  patch configuration. For example, if it's a patch
+     *                                  between multiple sources and sinks, and the HAL module
+     *                                  does not support this.
+     */
+    AudioPatch setAudioPatch(in AudioPatch requested);
+
+    /**
+     * Set the active configuration of an audio port.
+     *
+     * This method is used to create or update an active configuration for a mix
+     * port or a device port. The port is specified using the
+     * 'AudioPortConfig.portId' field. If the requested audio port
+     * configuration does not have a specified id in the 'AudioPortConfig.id'
+     * field, then a new configuration is created and an ID is allocated for it
+     * by the HAL module. Otherwise an attempt to update an existing port
+     * configuration is made. The HAL module returns the resulting audio port
+     * configuration. Depending on the port and on the capabilities of the HAL
+     * module, it can either update an existing port configuration (same port
+     * configuration ID remains), or create a new one. The resulting port
+     * configuration ID is returned in the 'id' field of the 'suggested'
+     * argument.
+     *
+     * If the specified port configuration can not be set, this method must
+     * return 'false' and provide its own suggestion in the output
+     * parameter. The framework can then set the suggested configuration on a
+     * subsequent retry call to this method.
+     *
+     * Device ports with dynamic audio profiles (an empty list of profiles)
+     * can not be used with this method. The list of profiles must be filled in
+     * as a result of calling 'connectExternalDevice' method.
+     *
+     * @return Whether the requested configuration has been applied.
+     * @param requested Requested audio port configuration.
+     * @param suggested Same as requested configuration, if it was applied.
+     *                  Suggested audio port configuration if the requested
+     *                  configuration can't be applied.
+     * @throws EX_ILLEGAL_ARGUMENT In the following cases:
+     *                             - If neither port config ID, nor port ID are specified.
+     *                             - If an existing port config can not be found by the ID.
+     *                             - If the port can not be found by the port ID.
+     *                             - If it is not possible to generate a suggested port
+     *                               configuration, for example, if the port only has dynamic
+     *                               profiles.
+     */
+    boolean setAudioPortConfig(in AudioPortConfig requested, out AudioPortConfig suggested);
+
+    /**
+     * Reset the audio patch.
+     *
+     * Resets previously created audio patch using its ID ('AudioPatch.id').  It
+     * is allowed to reset a patch which uses audio port configurations having
+     * associated streams. In this case the mix port becomes disconnected from
+     * the hardware, but the stream does not close.
+     *
+     * @param patchId The ID of the audio patch.
+     * @throws EX_ILLEGAL_ARGUMENT If an existing patch can not be found by the ID.
+     */
+    void resetAudioPatch(int patchId);
+
+    /**
+     * Reset the audio port configuration.
+     *
+     * Resets the specified audio port configuration, discarding all changes
+     * previously done by the framework. That means, if a call to this method is
+     * a success, the effect of all previous calls to 'setAudioPortConfig' which
+     * used or initially have generated the provided 'portConfigId', since the
+     * module start, or since the last call to this method, has been canceled.
+     *
+     * Audio port configurations of mix ports with streams opened on them can
+     * not be reset. Also can not be reset port configurations currently used by
+     * any patches.
+     *
+     * @param portConfigId The ID of the audio port config.
+     * @throws EX_ILLEGAL_ARGUMENT If the port config can not be found by the ID.
+     * @throws EX_ILLEGAL_STATE In the following cases:
+     *                          - If the port config has a stream opened on it;
+     *                          - If the port config is used by a patch.
+     */
+    void resetAudioPortConfig(int portConfigId);
+}
diff --git a/audio/aidl/android/hardware/audio/core/IStreamIn.aidl b/audio/aidl/android/hardware/audio/core/IStreamIn.aidl
new file mode 100644
index 0000000..b770449
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/IStreamIn.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+import android.hardware.audio.common.SinkMetadata;
+
+/**
+ * This interface provides means for receiving audio data from input devices.
+ */
+@VintfStability
+interface IStreamIn {
+    /**
+     * Close the stream.
+     *
+     * Releases any resources allocated for this stream on the HAL module side.
+     * The stream can not be operated after it has been closed. Methods of this
+     * interface throw EX_ILLEGAL_STATE in for a closed stream.
+     *
+     * @throws EX_ILLEGAL_STATE If the stream has already been closed.
+     */
+    void close();
+
+    /**
+     * Update stream metadata.
+     *
+     * Updates the metadata initially provided at the stream creation.
+     *
+     * @param sinkMetadata Updated metadata.
+     * @throws EX_ILLEGAL_STATE If the stream is closed.
+     */
+    void updateMetadata(in SinkMetadata sinkMetadata);
+}
diff --git a/audio/aidl/android/hardware/audio/core/IStreamOut.aidl b/audio/aidl/android/hardware/audio/core/IStreamOut.aidl
new file mode 100644
index 0000000..60212fc
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/IStreamOut.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+import android.hardware.audio.common.SourceMetadata;
+
+/**
+ * This interface provides means for sending audio data to output devices.
+ */
+@VintfStability
+interface IStreamOut {
+    /**
+     * Close the stream.
+     *
+     * Releases any resources allocated for this stream on the HAL module side.
+     * The stream can not be operated after it has been closed. Methods of this
+     * interface throw EX_ILLEGAL_STATE in for a closed stream.
+     *
+     * @throws EX_ILLEGAL_STATE If the stream has already been closed.
+     */
+    void close();
+
+    /**
+     * Update stream metadata.
+     *
+     * Updates the metadata initially provided at the stream creation.
+     *
+     * @param sourceMetadata Updated metadata.
+     * @throws EX_ILLEGAL_STATE If the stream is closed.
+     */
+    void updateMetadata(in SourceMetadata sourceMetadata);
+}
diff --git a/audio/aidl/android/hardware/audio/core/ModuleDebug.aidl b/audio/aidl/android/hardware/audio/core/ModuleDebug.aidl
new file mode 100644
index 0000000..858a9bd
--- /dev/null
+++ b/audio/aidl/android/hardware/audio/core/ModuleDebug.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.core;
+
+/**
+ * This structure contains flags used for enabling various debugging aspects
+ * in a HAL module. By default, all debugging aspects are turned off. They
+ * can be enabled during xTS tests for functionality that, for example, would
+ * otherwise require human intervention (e.g. connection of external devices).
+ */
+@JavaDerive(equals=true, toString=true)
+@VintfStability
+parcelable ModuleDebug {
+    /**
+     * When set to 'true', HAL module must simulate connection of external
+     * devices. An external device becomes 'connected' after a call to
+     * IModule.connectExternalDevice, simulation of connection requires:
+     *  - provision of at least one non-dynamic device port profile on
+     *    connection (as if it was retrieved from a connected device);
+     *  - simulating successful application of port configurations for reported
+     *    profiles.
+     */
+    boolean simulateDeviceConnections;
+}
diff --git a/audio/aidl/default/Android.bp b/audio/aidl/default/Android.bp
new file mode 100644
index 0000000..ad1d9c7
--- /dev/null
+++ b/audio/aidl/default/Android.bp
@@ -0,0 +1,49 @@
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_library_static {
+    name: "libaudioserviceexampleimpl",
+    vendor: true,
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+        "libstagefright_foundation",
+        "android.media.audio.common.types-V1-ndk",
+        "android.hardware.audio.core-V1-ndk",
+    ],
+    export_include_dirs: ["include"],
+    srcs: [
+        "Config.cpp",
+        "Configuration.cpp",
+        "Module.cpp",
+        "Stream.cpp",
+    ],
+    visibility: [
+        ":__subpackages__",
+    ],
+}
+
+cc_binary {
+    name: "android.hardware.audio.service-aidl.example",
+    relative_install_path: "hw",
+    init_rc: ["android.hardware.audio.service-aidl.example.rc"],
+    vintf_fragments: ["android.hardware.audio.service-aidl.xml"],
+    vendor: true,
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+        "libstagefright_foundation",
+        "android.media.audio.common.types-V1-ndk",
+        "android.hardware.audio.core-V1-ndk",
+    ],
+    static_libs: [
+        "libaudioserviceexampleimpl",
+    ],
+    srcs: ["main.cpp"],
+}
diff --git a/audio/aidl/default/Config.cpp b/audio/aidl/default/Config.cpp
new file mode 100644
index 0000000..3f7a3d3
--- /dev/null
+++ b/audio/aidl/default/Config.cpp
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "core-impl/Config.h"
+
+namespace aidl::android::hardware::audio::core {}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/Configuration.cpp b/audio/aidl/default/Configuration.cpp
new file mode 100644
index 0000000..f5d679b
--- /dev/null
+++ b/audio/aidl/default/Configuration.cpp
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <aidl/android/media/audio/common/AudioChannelLayout.h>
+#include <aidl/android/media/audio/common/AudioDeviceType.h>
+#include <aidl/android/media/audio/common/AudioFormatDescription.h>
+#include <aidl/android/media/audio/common/AudioFormatType.h>
+#include <aidl/android/media/audio/common/AudioIoFlags.h>
+#include <aidl/android/media/audio/common/AudioOutputFlags.h>
+#include <media/stagefright/foundation/MediaDefs.h>
+
+#include "core-impl/Configuration.h"
+
+using aidl::android::media::audio::common::AudioChannelLayout;
+using aidl::android::media::audio::common::AudioDeviceDescription;
+using aidl::android::media::audio::common::AudioDeviceType;
+using aidl::android::media::audio::common::AudioFormatDescription;
+using aidl::android::media::audio::common::AudioFormatType;
+using aidl::android::media::audio::common::AudioGainConfig;
+using aidl::android::media::audio::common::AudioIoFlags;
+using aidl::android::media::audio::common::AudioOutputFlags;
+using aidl::android::media::audio::common::AudioPort;
+using aidl::android::media::audio::common::AudioPortConfig;
+using aidl::android::media::audio::common::AudioPortDeviceExt;
+using aidl::android::media::audio::common::AudioPortExt;
+using aidl::android::media::audio::common::AudioPortMixExt;
+using aidl::android::media::audio::common::AudioProfile;
+using aidl::android::media::audio::common::Int;
+using aidl::android::media::audio::common::PcmType;
+
+namespace aidl::android::hardware::audio::core::internal {
+
+static void fillProfile(AudioProfile* profile, const std::vector<int32_t>& channelLayouts,
+                        const std::vector<int32_t>& sampleRates) {
+    for (auto layout : channelLayouts) {
+        profile->channelMasks.push_back(
+                AudioChannelLayout::make<AudioChannelLayout::layoutMask>(layout));
+    }
+    profile->sampleRates.insert(profile->sampleRates.end(), sampleRates.begin(), sampleRates.end());
+}
+
+static AudioProfile createProfile(PcmType pcmType, const std::vector<int32_t>& channelLayouts,
+                                  const std::vector<int32_t>& sampleRates) {
+    AudioProfile profile;
+    profile.format.type = AudioFormatType::PCM;
+    profile.format.pcm = pcmType;
+    fillProfile(&profile, channelLayouts, sampleRates);
+    return profile;
+}
+
+static AudioProfile createProfile(const std::string& encodingType,
+                                  const std::vector<int32_t>& channelLayouts,
+                                  const std::vector<int32_t>& sampleRates) {
+    AudioProfile profile;
+    profile.format.encoding = encodingType;
+    fillProfile(&profile, channelLayouts, sampleRates);
+    return profile;
+}
+
+static AudioPortExt createDeviceExt(AudioDeviceType devType, int32_t flags,
+                                    std::string connection = "") {
+    AudioPortDeviceExt deviceExt;
+    deviceExt.device.type.type = devType;
+    deviceExt.device.type.connection = std::move(connection);
+    deviceExt.flags = flags;
+    return AudioPortExt::make<AudioPortExt::Tag::device>(deviceExt);
+}
+
+static AudioPortExt createPortMixExt(int32_t maxOpenStreamCount, int32_t maxActiveStreamCount) {
+    AudioPortMixExt mixExt;
+    mixExt.maxOpenStreamCount = maxOpenStreamCount;
+    mixExt.maxActiveStreamCount = maxActiveStreamCount;
+    return AudioPortExt::make<AudioPortExt::Tag::mix>(mixExt);
+}
+
+static AudioPort createPort(int32_t id, const std::string& name, int32_t flags, bool isInput,
+                            const AudioPortExt& ext) {
+    AudioPort port;
+    port.id = id;
+    port.name = name;
+    port.flags = isInput ? AudioIoFlags::make<AudioIoFlags::Tag::input>(flags)
+                         : AudioIoFlags::make<AudioIoFlags::Tag::output>(flags);
+    port.ext = ext;
+    return port;
+}
+
+static AudioPortConfig createPortConfig(int32_t id, int32_t portId, PcmType pcmType, int32_t layout,
+                                        int32_t sampleRate, int32_t flags, bool isInput,
+                                        const AudioPortExt& ext) {
+    AudioPortConfig config;
+    config.id = id;
+    config.portId = portId;
+    config.sampleRate = Int{.value = sampleRate};
+    config.channelMask = AudioChannelLayout::make<AudioChannelLayout::layoutMask>(layout);
+    config.format = AudioFormatDescription{.type = AudioFormatType::PCM, .pcm = pcmType};
+    config.gain = AudioGainConfig();
+    config.flags = isInput ? AudioIoFlags::make<AudioIoFlags::Tag::input>(flags)
+                           : AudioIoFlags::make<AudioIoFlags::Tag::output>(flags);
+    config.ext = ext;
+    return config;
+}
+
+static AudioRoute createRoute(const std::vector<int32_t>& sources, int32_t sink) {
+    AudioRoute route;
+    route.sinkPortId = sink;
+    route.sourcePortIds.insert(route.sourcePortIds.end(), sources.begin(), sources.end());
+    return route;
+}
+
+// Configuration:
+//
+// Device ports:
+//  * "Null", OUT_SPEAKER, default
+//    - no profiles specified
+//  * "Loopback Out", OUT_SUBMIX
+//    - profile PCM 24-bit; STEREO; 48000
+//  * "USB Out", OUT_DEVICE, CONNECTION_USB
+//    - no profiles specified
+//  * "Zero", IN_MICROPHONE, default
+//    - no profiles specified
+//  * "Loopback In", IN_SUBMIX
+//    - profile PCM 24-bit; STEREO; 48000
+//  * "USB In", IN_DEVICE, CONNECTION_USB
+//    - no profiles specified
+//
+// Mix ports:
+//  * "primary output", PRIMARY, 1 max open, 1 max active stream
+//    - profile PCM 16-bit; MONO, STEREO; 44100, 48000
+//    - profile PCM 24-bit; MONO, STEREO; 44100, 48000
+//  * "compressed offload", DIRECT|COMPRESS_OFFLOAD|NON_BLOCKING, 1 max open, 1 max active stream
+//    - profile MP3; MONO, STEREO; 44100, 48000
+//  * "loopback output", stream count unlimited
+//    - profile PCM 24-bit; STEREO; 48000
+//  * "primary input", 2 max open, 2 max active streams
+//    - profile PCM 16-bit; MONO, STEREO, FRONT_BACK;
+//        8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
+//    - profile PCM 24-bit; MONO, STEREO, FRONT_BACK;
+//        8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
+//  * "loopback input", stream count unlimited
+//    - profile PCM 24-bit; STEREO; 48000
+//
+// Routes:
+//  "primary out", "compressed offload" -> "Null"
+//  "primary out", "compressed offload" -> "USB Out"
+//  "loopback out" -> "Loopback Out"
+//  "Zero", "USB In" -> "primary input"
+//  "Loopback In" -> "loopback input"
+//
+// Initial port configs:
+//  * "Null" device port: PCM 24-bit; STEREO; 48000
+//  * "Zero" device port: PCM 24-bit; MONO; 48000
+//
+// Profiles for device port connected state:
+//  * USB Out":
+//    - profile PCM 16-bit; MONO, STEREO; 44100, 48000
+//    - profile PCM 24-bit; MONO, STEREO; 44100, 48000
+//  * USB In":
+//    - profile PCM 16-bit; MONO, STEREO; 44100, 48000
+//    - profile PCM 24-bit; MONO, STEREO; 44100, 48000
+//
+Configuration& getNullPrimaryConfiguration() {
+    static Configuration configuration = []() {
+        const std::vector<AudioProfile> standardPcmAudioProfiles = {
+                createProfile(PcmType::INT_16_BIT,
+                              {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO},
+                              {44100, 48000}),
+                createProfile(PcmType::INT_24_BIT,
+                              {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO},
+                              {44100, 48000})};
+        Configuration c;
+
+        AudioPort nullOutDevice =
+                createPort(c.nextPortId++, "Null", 0, false,
+                           createDeviceExt(AudioDeviceType::OUT_SPEAKER,
+                                           1 << AudioPortDeviceExt::FLAG_INDEX_DEFAULT_DEVICE));
+        c.ports.push_back(nullOutDevice);
+        c.initialConfigs.push_back(
+                createPortConfig(nullOutDevice.id, nullOutDevice.id, PcmType::INT_24_BIT,
+                                 AudioChannelLayout::LAYOUT_STEREO, 48000, 0, false,
+                                 createDeviceExt(AudioDeviceType::OUT_SPEAKER, 0)));
+
+        AudioPort primaryOutMix = createPort(c.nextPortId++, "primary output",
+                                             1 << static_cast<int32_t>(AudioOutputFlags::PRIMARY),
+                                             false, createPortMixExt(1, 1));
+        primaryOutMix.profiles.insert(primaryOutMix.profiles.begin(),
+                                      standardPcmAudioProfiles.begin(),
+                                      standardPcmAudioProfiles.end());
+        c.ports.push_back(primaryOutMix);
+
+        AudioPort compressedOffloadOutMix =
+                createPort(c.nextPortId++, "compressed offload",
+                           1 << static_cast<int32_t>(AudioOutputFlags::DIRECT) |
+                                   1 << static_cast<int32_t>(AudioOutputFlags::COMPRESS_OFFLOAD) |
+                                   1 << static_cast<int32_t>(AudioOutputFlags::NON_BLOCKING),
+                           false, createPortMixExt(1, 1));
+        compressedOffloadOutMix.profiles.push_back(
+                createProfile(::android::MEDIA_MIMETYPE_AUDIO_MPEG,
+                              {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO},
+                              {44100, 48000}));
+        c.ports.push_back(compressedOffloadOutMix);
+
+        AudioPort loopOutDevice = createPort(c.nextPortId++, "Loopback Out", 0, false,
+                                             createDeviceExt(AudioDeviceType::OUT_SUBMIX, 0));
+        loopOutDevice.profiles.push_back(
+                createProfile(PcmType::INT_24_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {48000}));
+        c.ports.push_back(loopOutDevice);
+
+        AudioPort loopOutMix =
+                createPort(c.nextPortId++, "loopback output", 0, false, createPortMixExt(0, 0));
+        loopOutMix.profiles.push_back(
+                createProfile(PcmType::INT_24_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {48000}));
+        c.ports.push_back(loopOutMix);
+
+        AudioPort usbOutDevice =
+                createPort(c.nextPortId++, "USB Out", 0, false,
+                           createDeviceExt(AudioDeviceType::OUT_DEVICE, 0,
+                                           AudioDeviceDescription::CONNECTION_USB));
+        c.ports.push_back(usbOutDevice);
+        c.connectedProfiles[usbOutDevice.id] = standardPcmAudioProfiles;
+
+        AudioPort zeroInDevice =
+                createPort(c.nextPortId++, "Zero", 0, true,
+                           createDeviceExt(AudioDeviceType::IN_MICROPHONE,
+                                           1 << AudioPortDeviceExt::FLAG_INDEX_DEFAULT_DEVICE));
+        c.ports.push_back(zeroInDevice);
+        c.initialConfigs.push_back(
+                createPortConfig(zeroInDevice.id, zeroInDevice.id, PcmType::INT_24_BIT,
+                                 AudioChannelLayout::LAYOUT_MONO, 48000, 0, true,
+                                 createDeviceExt(AudioDeviceType::IN_MICROPHONE, 0)));
+
+        AudioPort primaryInMix =
+                createPort(c.nextPortId++, "primary input", 0, true, createPortMixExt(2, 2));
+        primaryInMix.profiles.push_back(
+                createProfile(PcmType::INT_16_BIT,
+                              {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO,
+                               AudioChannelLayout::LAYOUT_FRONT_BACK},
+                              {8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000}));
+        primaryInMix.profiles.push_back(
+                createProfile(PcmType::INT_24_BIT,
+                              {AudioChannelLayout::LAYOUT_MONO, AudioChannelLayout::LAYOUT_STEREO,
+                               AudioChannelLayout::LAYOUT_FRONT_BACK},
+                              {8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000}));
+        c.ports.push_back(primaryInMix);
+
+        AudioPort loopInDevice = createPort(c.nextPortId++, "Loopback In", 0, true,
+                                            createDeviceExt(AudioDeviceType::IN_SUBMIX, 0));
+        loopInDevice.profiles.push_back(
+                createProfile(PcmType::INT_24_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {48000}));
+        c.ports.push_back(loopInDevice);
+
+        AudioPort loopInMix =
+                createPort(c.nextPortId++, "loopback input", 0, true, createPortMixExt(0, 0));
+        loopInMix.profiles.push_back(
+                createProfile(PcmType::INT_24_BIT, {AudioChannelLayout::LAYOUT_STEREO}, {48000}));
+        c.ports.push_back(loopInMix);
+
+        AudioPort usbInDevice = createPort(c.nextPortId++, "USB In", 0, true,
+                                           createDeviceExt(AudioDeviceType::IN_DEVICE, 0,
+                                                           AudioDeviceDescription::CONNECTION_USB));
+        c.ports.push_back(usbInDevice);
+        c.connectedProfiles[usbInDevice.id] = standardPcmAudioProfiles;
+
+        c.routes.push_back(
+                createRoute({primaryOutMix.id, compressedOffloadOutMix.id}, nullOutDevice.id));
+        c.routes.push_back(
+                createRoute({primaryOutMix.id, compressedOffloadOutMix.id}, usbOutDevice.id));
+        c.routes.push_back(createRoute({loopOutMix.id}, loopOutDevice.id));
+        c.routes.push_back(createRoute({zeroInDevice.id, usbInDevice.id}, primaryInMix.id));
+        c.routes.push_back(createRoute({loopInDevice.id}, loopInMix.id));
+
+        c.portConfigs.insert(c.portConfigs.end(), c.initialConfigs.begin(), c.initialConfigs.end());
+        return c;
+    }();
+    return configuration;
+}
+
+}  // namespace aidl::android::hardware::audio::core::internal
diff --git a/audio/aidl/default/Module.cpp b/audio/aidl/default/Module.cpp
new file mode 100644
index 0000000..5b4d48a
--- /dev/null
+++ b/audio/aidl/default/Module.cpp
@@ -0,0 +1,696 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <algorithm>
+#include <set>
+
+#define LOG_TAG "AHAL_Module"
+#include <android-base/logging.h>
+
+#include <aidl/android/media/audio/common/AudioOutputFlags.h>
+
+#include "core-impl/Module.h"
+#include "core-impl/utils.h"
+
+using aidl::android::hardware::audio::common::SinkMetadata;
+using aidl::android::hardware::audio::common::SourceMetadata;
+using aidl::android::media::audio::common::AudioFormatDescription;
+using aidl::android::media::audio::common::AudioIoFlags;
+using aidl::android::media::audio::common::AudioOffloadInfo;
+using aidl::android::media::audio::common::AudioOutputFlags;
+using aidl::android::media::audio::common::AudioPort;
+using aidl::android::media::audio::common::AudioPortConfig;
+using aidl::android::media::audio::common::AudioPortExt;
+using aidl::android::media::audio::common::AudioProfile;
+using aidl::android::media::audio::common::Int;
+
+namespace aidl::android::hardware::audio::core {
+
+namespace {
+
+bool generateDefaultPortConfig(const AudioPort& port, AudioPortConfig* config) {
+    *config = {};
+    config->portId = port.id;
+    if (port.profiles.empty()) {
+        LOG(ERROR) << __func__ << ": port " << port.id << " has no profiles";
+        return false;
+    }
+    const auto& profile = port.profiles.begin();
+    config->format = profile->format;
+    if (profile->channelMasks.empty()) {
+        LOG(ERROR) << __func__ << ": the first profile in port " << port.id
+                   << " has no channel masks";
+        return false;
+    }
+    config->channelMask = *profile->channelMasks.begin();
+    if (profile->sampleRates.empty()) {
+        LOG(ERROR) << __func__ << ": the first profile in port " << port.id
+                   << " has no sample rates";
+        return false;
+    }
+    Int sampleRate;
+    sampleRate.value = *profile->sampleRates.begin();
+    config->sampleRate = sampleRate;
+    config->flags = port.flags;
+    config->ext = port.ext;
+    return true;
+}
+
+bool findAudioProfile(const AudioPort& port, const AudioFormatDescription& format,
+                      AudioProfile* profile) {
+    if (auto profilesIt =
+                find_if(port.profiles.begin(), port.profiles.end(),
+                        [&format](const auto& profile) { return profile.format == format; });
+        profilesIt != port.profiles.end()) {
+        *profile = *profilesIt;
+        return true;
+    }
+    return false;
+}
+
+}  // namespace
+
+void Module::cleanUpPatch(int32_t patchId) {
+    erase_all_values(mPatches, std::set<int32_t>{patchId});
+}
+
+void Module::cleanUpPatches(int32_t portConfigId) {
+    auto& patches = getConfig().patches;
+    if (patches.size() == 0) return;
+    auto range = mPatches.equal_range(portConfigId);
+    for (auto it = range.first; it != range.second; ++it) {
+        auto patchIt = findById<AudioPatch>(patches, it->second);
+        if (patchIt != patches.end()) {
+            erase_if(patchIt->sourcePortConfigIds,
+                     [portConfigId](auto e) { return e == portConfigId; });
+            erase_if(patchIt->sinkPortConfigIds,
+                     [portConfigId](auto e) { return e == portConfigId; });
+        }
+    }
+    std::set<int32_t> erasedPatches;
+    for (size_t i = patches.size() - 1; i != 0; --i) {
+        const auto& patch = patches[i];
+        if (patch.sourcePortConfigIds.empty() || patch.sinkPortConfigIds.empty()) {
+            erasedPatches.insert(patch.id);
+            patches.erase(patches.begin() + i);
+        }
+    }
+    erase_all_values(mPatches, erasedPatches);
+}
+
+internal::Configuration& Module::getConfig() {
+    if (!mConfig) {
+        mConfig.reset(new internal::Configuration(internal::getNullPrimaryConfiguration()));
+    }
+    return *mConfig;
+}
+
+void Module::registerPatch(const AudioPatch& patch) {
+    auto& configs = getConfig().portConfigs;
+    auto do_insert = [&](const std::vector<int32_t>& portConfigIds) {
+        for (auto portConfigId : portConfigIds) {
+            auto configIt = findById<AudioPortConfig>(configs, portConfigId);
+            if (configIt != configs.end()) {
+                mPatches.insert(std::pair{portConfigId, patch.id});
+                if (configIt->portId != portConfigId) {
+                    mPatches.insert(std::pair{configIt->portId, patch.id});
+                }
+            }
+        };
+    };
+    do_insert(patch.sourcePortConfigIds);
+    do_insert(patch.sinkPortConfigIds);
+}
+
+ndk::ScopedAStatus Module::setModuleDebug(
+        const ::aidl::android::hardware::audio::core::ModuleDebug& in_debug) {
+    LOG(DEBUG) << __func__ << ": old flags:" << mDebug.toString()
+               << ", new flags: " << in_debug.toString();
+    if (mDebug.simulateDeviceConnections != in_debug.simulateDeviceConnections &&
+        !mConnectedDevicePorts.empty()) {
+        LOG(ERROR) << __func__ << ": attempting to change device connections simulation "
+                   << "while having external devices connected";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+    mDebug = in_debug;
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::connectExternalDevice(const AudioPort& in_templateIdAndAdditionalData,
+                                                 AudioPort* _aidl_return) {
+    const int32_t templateId = in_templateIdAndAdditionalData.id;
+    auto& ports = getConfig().ports;
+    AudioPort connectedPort;
+    {  // Scope the template port so that we don't accidentally modify it.
+        auto templateIt = findById<AudioPort>(ports, templateId);
+        if (templateIt == ports.end()) {
+            LOG(ERROR) << __func__ << ": port id " << templateId << " not found";
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+        if (templateIt->ext.getTag() != AudioPortExt::Tag::device) {
+            LOG(ERROR) << __func__ << ": port id " << templateId << " is not a device port";
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+        if (!templateIt->profiles.empty()) {
+            LOG(ERROR) << __func__ << ": port id " << templateId
+                       << " does not have dynamic profiles";
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+        auto& templateDevicePort = templateIt->ext.get<AudioPortExt::Tag::device>();
+        if (templateDevicePort.device.type.connection.empty()) {
+            LOG(ERROR) << __func__ << ": port id " << templateId << " is permanently attached";
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+        // Postpone id allocation until we ensure that there are no client errors.
+        connectedPort = *templateIt;
+        connectedPort.extraAudioDescriptors = in_templateIdAndAdditionalData.extraAudioDescriptors;
+        const auto& inputDevicePort =
+                in_templateIdAndAdditionalData.ext.get<AudioPortExt::Tag::device>();
+        auto& connectedDevicePort = connectedPort.ext.get<AudioPortExt::Tag::device>();
+        connectedDevicePort.device.address = inputDevicePort.device.address;
+        LOG(DEBUG) << __func__ << ": device port " << connectedPort.id << " device set to "
+                   << connectedDevicePort.device.toString();
+        // Check if there is already a connected port with for the same external device.
+        for (auto connectedPortId : mConnectedDevicePorts) {
+            auto connectedPortIt = findById<AudioPort>(ports, connectedPortId);
+            if (connectedPortIt->ext.get<AudioPortExt::Tag::device>().device ==
+                connectedDevicePort.device) {
+                LOG(ERROR) << __func__ << ": device " << connectedDevicePort.device.toString()
+                           << " is already connected at the device port id " << connectedPortId;
+                return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+            }
+        }
+    }
+
+    if (!mDebug.simulateDeviceConnections) {
+        // In a real HAL here we would attempt querying the profiles from the device.
+        LOG(ERROR) << __func__ << ": failed to query supported device profiles";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+
+    connectedPort.id = ++getConfig().nextPortId;
+    mConnectedDevicePorts.insert(connectedPort.id);
+    LOG(DEBUG) << __func__ << ": template port " << templateId << " external device connected, "
+               << "connected port ID " << connectedPort.id;
+    auto& connectedProfiles = getConfig().connectedProfiles;
+    if (auto connectedProfilesIt = connectedProfiles.find(templateId);
+        connectedProfilesIt != connectedProfiles.end()) {
+        connectedPort.profiles = connectedProfilesIt->second;
+    }
+    ports.push_back(connectedPort);
+    *_aidl_return = std::move(connectedPort);
+
+    std::vector<AudioRoute> newRoutes;
+    auto& routes = getConfig().routes;
+    for (auto& r : routes) {
+        if (r.sinkPortId == templateId) {
+            AudioRoute newRoute;
+            newRoute.sourcePortIds = r.sourcePortIds;
+            newRoute.sinkPortId = connectedPort.id;
+            newRoute.isExclusive = r.isExclusive;
+            newRoutes.push_back(std::move(newRoute));
+        } else {
+            auto& srcs = r.sourcePortIds;
+            if (std::find(srcs.begin(), srcs.end(), templateId) != srcs.end()) {
+                srcs.push_back(connectedPort.id);
+            }
+        }
+    }
+    routes.insert(routes.end(), newRoutes.begin(), newRoutes.end());
+
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::disconnectExternalDevice(int32_t in_portId) {
+    auto& ports = getConfig().ports;
+    auto portIt = findById<AudioPort>(ports, in_portId);
+    if (portIt == ports.end()) {
+        LOG(ERROR) << __func__ << ": port id " << in_portId << " not found";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (portIt->ext.getTag() != AudioPortExt::Tag::device) {
+        LOG(ERROR) << __func__ << ": port id " << in_portId << " is not a device port";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (mConnectedDevicePorts.count(in_portId) == 0) {
+        LOG(ERROR) << __func__ << ": port id " << in_portId << " is not a connected device port";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    auto& configs = getConfig().portConfigs;
+    auto& initials = getConfig().initialConfigs;
+    auto configIt = std::find_if(configs.begin(), configs.end(), [&](const auto& config) {
+        if (config.portId == in_portId) {
+            // Check if the configuration was provided by the client.
+            const auto& initialIt = findById<AudioPortConfig>(initials, config.id);
+            return initialIt == initials.end() || config != *initialIt;
+        }
+        return false;
+    });
+    if (configIt != configs.end()) {
+        LOG(ERROR) << __func__ << ": port id " << in_portId << " has a non-default config with id "
+                   << configIt->id;
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+    ports.erase(portIt);
+    mConnectedDevicePorts.erase(in_portId);
+    LOG(DEBUG) << __func__ << ": connected device port " << in_portId << " released";
+
+    auto& routes = getConfig().routes;
+    for (auto routesIt = routes.begin(); routesIt != routes.end();) {
+        if (routesIt->sinkPortId == in_portId) {
+            routesIt = routes.erase(routesIt);
+        } else {
+            // Note: the list of sourcePortIds can't become empty because there must
+            // be the id of the template port in the route.
+            erase_if(routesIt->sourcePortIds, [in_portId](auto src) { return src == in_portId; });
+            ++routesIt;
+        }
+    }
+
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::getAudioPatches(std::vector<AudioPatch>* _aidl_return) {
+    *_aidl_return = getConfig().patches;
+    LOG(DEBUG) << __func__ << ": returning " << _aidl_return->size() << " patches";
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::getAudioPort(int32_t in_portId, AudioPort* _aidl_return) {
+    auto& ports = getConfig().ports;
+    auto portIt = findById<AudioPort>(ports, in_portId);
+    if (portIt != ports.end()) {
+        *_aidl_return = *portIt;
+        LOG(DEBUG) << __func__ << ": returning port by id " << in_portId;
+        return ndk::ScopedAStatus::ok();
+    }
+    LOG(ERROR) << __func__ << ": port id " << in_portId << " not found";
+    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+}
+
+ndk::ScopedAStatus Module::getAudioPortConfigs(std::vector<AudioPortConfig>* _aidl_return) {
+    *_aidl_return = getConfig().portConfigs;
+    LOG(DEBUG) << __func__ << ": returning " << _aidl_return->size() << " port configs";
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::getAudioPorts(std::vector<AudioPort>* _aidl_return) {
+    *_aidl_return = getConfig().ports;
+    LOG(DEBUG) << __func__ << ": returning " << _aidl_return->size() << " ports";
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::getAudioRoutes(std::vector<AudioRoute>* _aidl_return) {
+    *_aidl_return = getConfig().routes;
+    LOG(DEBUG) << __func__ << ": returning " << _aidl_return->size() << " routes";
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::getAudioRoutesForAudioPort(int32_t in_portId,
+                                                      std::vector<AudioRoute>* _aidl_return) {
+    auto& ports = getConfig().ports;
+    if (auto portIt = findById<AudioPort>(ports, in_portId); portIt == ports.end()) {
+        LOG(ERROR) << __func__ << ": port id " << in_portId << " not found";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    auto& routes = getConfig().routes;
+    std::copy_if(routes.begin(), routes.end(), std::back_inserter(*_aidl_return),
+                 [&](const auto& r) {
+                     const auto& srcs = r.sourcePortIds;
+                     return r.sinkPortId == in_portId ||
+                            std::find(srcs.begin(), srcs.end(), in_portId) != srcs.end();
+                 });
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::openInputStream(int32_t in_portConfigId,
+                                           const SinkMetadata& in_sinkMetadata,
+                                           std::shared_ptr<IStreamIn>* _aidl_return) {
+    auto& configs = getConfig().portConfigs;
+    auto portConfigIt = findById<AudioPortConfig>(configs, in_portConfigId);
+    if (portConfigIt == configs.end()) {
+        LOG(ERROR) << __func__ << ": existing port config id " << in_portConfigId << " not found";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    const int32_t portId = portConfigIt->portId;
+    // In our implementation, configs of mix ports always have unique IDs.
+    CHECK(portId != in_portConfigId);
+    auto& ports = getConfig().ports;
+    auto portIt = findById<AudioPort>(ports, portId);
+    if (portIt == ports.end()) {
+        LOG(ERROR) << __func__ << ": port id " << portId << " used by port config id "
+                   << in_portConfigId << " not found";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (portIt->flags.getTag() != AudioIoFlags::Tag::input ||
+        portIt->ext.getTag() != AudioPortExt::Tag::mix) {
+        LOG(ERROR) << __func__ << ": port config id " << in_portConfigId
+                   << " does not correspond to an input mix port";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (mStreams.count(in_portConfigId) != 0) {
+        LOG(ERROR) << __func__ << ": port config id " << in_portConfigId
+                   << " already has a stream opened on it";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+    const int32_t maxOpenStreamCount = portIt->ext.get<AudioPortExt::Tag::mix>().maxOpenStreamCount;
+    if (maxOpenStreamCount != 0 && mStreams.count(portId) >= maxOpenStreamCount) {
+        LOG(ERROR) << __func__ << ": port id " << portId
+                   << " has already reached maximum allowed opened stream count: "
+                   << maxOpenStreamCount;
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+    auto stream = ndk::SharedRefBase::make<StreamIn>(in_sinkMetadata);
+    mStreams.insert(portId, in_portConfigId, StreamWrapper(stream));
+    *_aidl_return = std::move(stream);
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::openOutputStream(int32_t in_portConfigId,
+                                            const SourceMetadata& in_sourceMetadata,
+                                            const std::optional<AudioOffloadInfo>& in_offloadInfo,
+                                            std::shared_ptr<IStreamOut>* _aidl_return) {
+    auto& configs = getConfig().portConfigs;
+    auto portConfigIt = findById<AudioPortConfig>(configs, in_portConfigId);
+    if (portConfigIt == configs.end()) {
+        LOG(ERROR) << __func__ << ": existing port config id " << in_portConfigId << " not found";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    const int32_t portId = portConfigIt->portId;
+    // In our implementation, configs of mix ports always have unique IDs.
+    CHECK(portId != in_portConfigId);
+    auto& ports = getConfig().ports;
+    auto portIt = findById<AudioPort>(ports, portId);
+    if (portIt == ports.end()) {
+        LOG(ERROR) << __func__ << ": port id " << portId << " used by port config id "
+                   << in_portConfigId << " not found";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (portIt->flags.getTag() != AudioIoFlags::Tag::output ||
+        portIt->ext.getTag() != AudioPortExt::Tag::mix) {
+        LOG(ERROR) << __func__ << ": port config id " << in_portConfigId
+                   << " does not correspond to an output mix port";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (portConfigIt->flags.has_value() &&
+        ((portConfigIt->flags.value().get<AudioIoFlags::Tag::output>() &
+          1 << static_cast<int32_t>(AudioOutputFlags::COMPRESS_OFFLOAD)) != 0) &&
+        !in_offloadInfo.has_value()) {
+        LOG(ERROR) << __func__ << ": port config id " << in_portConfigId
+                   << " has COMPRESS_OFFLOAD flag set, requires offload info";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (mStreams.count(in_portConfigId) != 0) {
+        LOG(ERROR) << __func__ << ": port config id " << in_portConfigId
+                   << " already has a stream opened on it";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+    const int32_t maxOpenStreamCount = portIt->ext.get<AudioPortExt::Tag::mix>().maxOpenStreamCount;
+    if (maxOpenStreamCount != 0 && mStreams.count(portId) >= maxOpenStreamCount) {
+        LOG(ERROR) << __func__ << ": port id " << portId
+                   << " has already reached maximum allowed opened stream count: "
+                   << maxOpenStreamCount;
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+    auto stream = ndk::SharedRefBase::make<StreamOut>(in_sourceMetadata, in_offloadInfo);
+    mStreams.insert(portId, in_portConfigId, StreamWrapper(stream));
+    *_aidl_return = std::move(stream);
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::setAudioPatch(const AudioPatch& in_requested, AudioPatch* _aidl_return) {
+    LOG(DEBUG) << __func__ << ": requested patch " << in_requested.toString();
+    if (in_requested.sourcePortConfigIds.empty()) {
+        LOG(ERROR) << __func__ << ": requested patch has empty sources list";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (!all_unique<int32_t>(in_requested.sourcePortConfigIds)) {
+        LOG(ERROR) << __func__ << ": requested patch has duplicate ids in the sources list";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (in_requested.sinkPortConfigIds.empty()) {
+        LOG(ERROR) << __func__ << ": requested patch has empty sinks list";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (!all_unique<int32_t>(in_requested.sinkPortConfigIds)) {
+        LOG(ERROR) << __func__ << ": requested patch has duplicate ids in the sinks list";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+
+    auto& configs = getConfig().portConfigs;
+    std::vector<int32_t> missingIds;
+    auto sources =
+            selectByIds<AudioPortConfig>(configs, in_requested.sourcePortConfigIds, &missingIds);
+    if (!missingIds.empty()) {
+        LOG(ERROR) << __func__ << ": following source port config ids not found: "
+                   << ::android::internal::ToString(missingIds);
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    auto sinks = selectByIds<AudioPortConfig>(configs, in_requested.sinkPortConfigIds, &missingIds);
+    if (!missingIds.empty()) {
+        LOG(ERROR) << __func__ << ": following sink port config ids not found: "
+                   << ::android::internal::ToString(missingIds);
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    // bool indicates whether a non-exclusive route is available.
+    // If only an exclusive route is available, that means the patch can not be
+    // established if there is any other patch which currently uses the sink port.
+    std::map<int32_t, bool> allowedSinkPorts;
+    auto& routes = getConfig().routes;
+    for (auto src : sources) {
+        for (const auto& r : routes) {
+            const auto& srcs = r.sourcePortIds;
+            if (std::find(srcs.begin(), srcs.end(), src->portId) != srcs.end()) {
+                if (!allowedSinkPorts[r.sinkPortId]) {  // prefer non-exclusive
+                    allowedSinkPorts[r.sinkPortId] = !r.isExclusive;
+                }
+            }
+        }
+    }
+    for (auto sink : sinks) {
+        if (allowedSinkPorts.count(sink->portId) == 0) {
+            LOG(ERROR) << __func__ << ": there is no route to the sink port id " << sink->portId;
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+    }
+
+    auto& patches = getConfig().patches;
+    auto existing = patches.end();
+    std::optional<decltype(mPatches)> patchesBackup;
+    if (in_requested.id != 0) {
+        existing = findById<AudioPatch>(patches, in_requested.id);
+        if (existing != patches.end()) {
+            patchesBackup = mPatches;
+            cleanUpPatch(existing->id);
+        } else {
+            LOG(ERROR) << __func__ << ": not found existing patch id " << in_requested.id;
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+    }
+    // Validate the requested patch.
+    for (const auto& [sinkPortId, nonExclusive] : allowedSinkPorts) {
+        if (!nonExclusive && mPatches.count(sinkPortId) != 0) {
+            LOG(ERROR) << __func__ << ": sink port id " << sinkPortId
+                       << "is exclusive and is already used by some other patch";
+            if (patchesBackup.has_value()) {
+                mPatches = std::move(*patchesBackup);
+            }
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+        }
+    }
+    *_aidl_return = in_requested;
+    if (existing == patches.end()) {
+        _aidl_return->id = getConfig().nextPatchId++;
+        patches.push_back(*_aidl_return);
+        existing = patches.begin() + (patches.size() - 1);
+    } else {
+        *existing = *_aidl_return;
+    }
+    registerPatch(*existing);
+    LOG(DEBUG) << __func__ << ": created or updated patch id " << _aidl_return->id;
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::setAudioPortConfig(const AudioPortConfig& in_requested,
+                                              AudioPortConfig* out_suggested, bool* _aidl_return) {
+    LOG(DEBUG) << __func__ << ": requested " << in_requested.toString();
+    auto& configs = getConfig().portConfigs;
+    auto existing = configs.end();
+    if (in_requested.id != 0) {
+        if (existing = findById<AudioPortConfig>(configs, in_requested.id);
+            existing == configs.end()) {
+            LOG(ERROR) << __func__ << ": existing port config id " << in_requested.id
+                       << " not found";
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+    }
+
+    const int portId = existing != configs.end() ? existing->portId : in_requested.portId;
+    if (portId == 0) {
+        LOG(ERROR) << __func__ << ": input port config does not specify portId";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    auto& ports = getConfig().ports;
+    auto portIt = findById<AudioPort>(ports, portId);
+    if (portIt == ports.end()) {
+        LOG(ERROR) << __func__ << ": input port config points to non-existent portId " << portId;
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+    if (existing != configs.end()) {
+        *out_suggested = *existing;
+    } else {
+        AudioPortConfig newConfig;
+        if (generateDefaultPortConfig(*portIt, &newConfig)) {
+            *out_suggested = newConfig;
+        } else {
+            LOG(ERROR) << __func__ << ": unable generate a default config for port " << portId;
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+        }
+    }
+    // From this moment, 'out_suggested' is either an existing port config,
+    // or a new generated config. Now attempt to update it according to the specified
+    // fields of 'in_requested'.
+
+    bool requestedIsValid = true, requestedIsFullySpecified = true;
+
+    AudioIoFlags portFlags = portIt->flags;
+    if (in_requested.flags.has_value()) {
+        if (in_requested.flags.value() != portFlags) {
+            LOG(WARNING) << __func__ << ": requested flags "
+                         << in_requested.flags.value().toString() << " do not match port's "
+                         << portId << " flags " << portFlags.toString();
+            requestedIsValid = false;
+        }
+    } else {
+        requestedIsFullySpecified = false;
+    }
+
+    AudioProfile portProfile;
+    if (in_requested.format.has_value()) {
+        const auto& format = in_requested.format.value();
+        if (findAudioProfile(*portIt, format, &portProfile)) {
+            out_suggested->format = format;
+        } else {
+            LOG(WARNING) << __func__ << ": requested format " << format.toString()
+                         << " is not found in port's " << portId << " profiles";
+            requestedIsValid = false;
+        }
+    } else {
+        requestedIsFullySpecified = false;
+    }
+    if (!findAudioProfile(*portIt, out_suggested->format.value(), &portProfile)) {
+        LOG(ERROR) << __func__ << ": port " << portId << " does not support format "
+                   << out_suggested->format.value().toString() << " anymore";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+
+    if (in_requested.channelMask.has_value()) {
+        const auto& channelMask = in_requested.channelMask.value();
+        if (find(portProfile.channelMasks.begin(), portProfile.channelMasks.end(), channelMask) !=
+            portProfile.channelMasks.end()) {
+            out_suggested->channelMask = channelMask;
+        } else {
+            LOG(WARNING) << __func__ << ": requested channel mask " << channelMask.toString()
+                         << " is not supported for the format " << portProfile.format.toString()
+                         << " by the port " << portId;
+            requestedIsValid = false;
+        }
+    } else {
+        requestedIsFullySpecified = false;
+    }
+
+    if (in_requested.sampleRate.has_value()) {
+        const auto& sampleRate = in_requested.sampleRate.value();
+        if (find(portProfile.sampleRates.begin(), portProfile.sampleRates.end(),
+                 sampleRate.value) != portProfile.sampleRates.end()) {
+            out_suggested->sampleRate = sampleRate;
+        } else {
+            LOG(WARNING) << __func__ << ": requested sample rate " << sampleRate.value
+                         << " is not supported for the format " << portProfile.format.toString()
+                         << " by the port " << portId;
+            requestedIsValid = false;
+        }
+    } else {
+        requestedIsFullySpecified = false;
+    }
+
+    if (in_requested.gain.has_value()) {
+        // Let's pretend that gain can always be applied.
+        out_suggested->gain = in_requested.gain.value();
+    }
+
+    if (existing == configs.end() && requestedIsValid && requestedIsFullySpecified) {
+        out_suggested->id = getConfig().nextPortId++;
+        configs.push_back(*out_suggested);
+        *_aidl_return = true;
+        LOG(DEBUG) << __func__ << ": created new port config " << out_suggested->toString();
+    } else if (existing != configs.end() && requestedIsValid) {
+        *existing = *out_suggested;
+        *_aidl_return = true;
+        LOG(DEBUG) << __func__ << ": updated port config " << out_suggested->toString();
+    } else {
+        LOG(DEBUG) << __func__ << ": not applied; existing config ? " << (existing != configs.end())
+                   << "; requested is valid? " << requestedIsValid << ", fully specified? "
+                   << requestedIsFullySpecified;
+        *_aidl_return = false;
+    }
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus Module::resetAudioPatch(int32_t in_patchId) {
+    auto& patches = getConfig().patches;
+    auto patchIt = findById<AudioPatch>(patches, in_patchId);
+    if (patchIt != patches.end()) {
+        cleanUpPatch(patchIt->id);
+        patches.erase(patchIt);
+        LOG(DEBUG) << __func__ << ": erased patch " << in_patchId;
+        return ndk::ScopedAStatus::ok();
+    }
+    LOG(ERROR) << __func__ << ": patch id " << in_patchId << " not found";
+    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+}
+
+ndk::ScopedAStatus Module::resetAudioPortConfig(int32_t in_portConfigId) {
+    auto& configs = getConfig().portConfigs;
+    auto configIt = findById<AudioPortConfig>(configs, in_portConfigId);
+    if (configIt != configs.end()) {
+        if (mStreams.count(in_portConfigId) != 0) {
+            LOG(ERROR) << __func__ << ": port config id " << in_portConfigId
+                       << " has a stream opened on it";
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+        }
+        auto patchIt = mPatches.find(in_portConfigId);
+        if (patchIt != mPatches.end()) {
+            LOG(ERROR) << __func__ << ": port config id " << in_portConfigId
+                       << " is used by the patch with id " << patchIt->second;
+            return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+        }
+        auto& initials = getConfig().initialConfigs;
+        auto initialIt = findById<AudioPortConfig>(initials, in_portConfigId);
+        if (initialIt == initials.end()) {
+            configs.erase(configIt);
+            LOG(DEBUG) << __func__ << ": erased port config " << in_portConfigId;
+        } else if (*configIt != *initialIt) {
+            *configIt = *initialIt;
+            LOG(DEBUG) << __func__ << ": reset port config " << in_portConfigId;
+        }
+        return ndk::ScopedAStatus::ok();
+    }
+    LOG(ERROR) << __func__ << ": port config id " << in_portConfigId << " not found";
+    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+}
+
+}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/Stream.cpp b/audio/aidl/default/Stream.cpp
new file mode 100644
index 0000000..e16b2c6
--- /dev/null
+++ b/audio/aidl/default/Stream.cpp
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "AHAL_Stream"
+#define LOG_NDEBUG 0
+#include <android-base/logging.h>
+
+#include "core-impl/Stream.h"
+
+using aidl::android::hardware::audio::common::SinkMetadata;
+using aidl::android::hardware::audio::common::SourceMetadata;
+using aidl::android::media::audio::common::AudioOffloadInfo;
+
+namespace aidl::android::hardware::audio::core {
+
+StreamIn::StreamIn(const SinkMetadata& sinkMetadata) : mMetadata(sinkMetadata) {}
+
+ndk::ScopedAStatus StreamIn::close() {
+    LOG(DEBUG) << __func__;
+    if (!mIsClosed) {
+        mIsClosed = true;
+        return ndk::ScopedAStatus::ok();
+    } else {
+        LOG(ERROR) << __func__ << ": stream was already closed";
+        return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+    }
+}
+
+ndk::ScopedAStatus StreamIn::updateMetadata(const SinkMetadata& in_sinkMetadata) {
+    LOG(DEBUG) << __func__;
+    if (!mIsClosed) {
+        mMetadata = in_sinkMetadata;
+        return ndk::ScopedAStatus::ok();
+    }
+    LOG(ERROR) << __func__ << ": stream was closed";
+    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+}
+
+StreamOut::StreamOut(const SourceMetadata& sourceMetadata,
+                     const std::optional<AudioOffloadInfo>& offloadInfo)
+    : mMetadata(sourceMetadata), mOffloadInfo(offloadInfo) {}
+
+ndk::ScopedAStatus StreamOut::close() {
+    LOG(DEBUG) << __func__;
+    if (!mIsClosed) {
+        mIsClosed = true;
+        return ndk::ScopedAStatus::ok();
+    }
+    LOG(ERROR) << __func__ << ": stream was already closed";
+    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+}
+
+ndk::ScopedAStatus StreamOut::updateMetadata(const SourceMetadata& in_sourceMetadata) {
+    LOG(DEBUG) << __func__;
+    if (!mIsClosed) {
+        mMetadata = in_sourceMetadata;
+        return ndk::ScopedAStatus::ok();
+    }
+    LOG(ERROR) << __func__ << ": stream was closed";
+    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_STATE);
+}
+
+}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/android.hardware.audio.service-aidl.example.rc b/audio/aidl/default/android.hardware.audio.service-aidl.example.rc
new file mode 100644
index 0000000..02a9c37
--- /dev/null
+++ b/audio/aidl/default/android.hardware.audio.service-aidl.example.rc
@@ -0,0 +1,9 @@
+service vendor.audio-hal-aidl /vendor/bin/hw/android.hardware.audio.service-aidl.example
+    class hal
+    user audioserver
+    # media gid needed for /dev/fm (radio) and for /data/misc/media (tee)
+    group audio camera drmrpc inet media mediadrm net_bt net_bt_admin net_bw_acct wakelock context_hub
+    capabilities BLOCK_SUSPEND
+    ioprio rt 4
+    task_profiles ProcessCapacityHigh HighPerformance
+    onrestart restart audioserver
diff --git a/audio/aidl/default/android.hardware.audio.service-aidl.xml b/audio/aidl/default/android.hardware.audio.service-aidl.xml
new file mode 100644
index 0000000..bb4b01a
--- /dev/null
+++ b/audio/aidl/default/android.hardware.audio.service-aidl.xml
@@ -0,0 +1,12 @@
+<manifest version="1.0" type="device">
+  <hal format="aidl">
+    <name>android.hardware.audio.core</name>
+    <version>1</version>
+    <fqname>IModule/default</fqname>
+  </hal>
+  <hal format="aidl">
+    <name>android.hardware.audio.core</name>
+    <version>1</version>
+    <fqname>IConfig/default</fqname>
+  </hal>
+</manifest>
diff --git a/audio/aidl/default/include/core-impl/Config.h b/audio/aidl/default/include/core-impl/Config.h
new file mode 100644
index 0000000..b62a14b
--- /dev/null
+++ b/audio/aidl/default/include/core-impl/Config.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <aidl/android/hardware/audio/core/BnConfig.h>
+
+namespace aidl::android::hardware::audio::core {
+
+class Config : public BnConfig {};
+
+}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/include/core-impl/Configuration.h b/audio/aidl/default/include/core-impl/Configuration.h
new file mode 100644
index 0000000..d5cd30b
--- /dev/null
+++ b/audio/aidl/default/include/core-impl/Configuration.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <map>
+#include <vector>
+
+#include <aidl/android/hardware/audio/core/AudioPatch.h>
+#include <aidl/android/hardware/audio/core/AudioRoute.h>
+#include <aidl/android/media/audio/common/AudioPort.h>
+#include <aidl/android/media/audio/common/AudioPortConfig.h>
+
+namespace aidl::android::hardware::audio::core::internal {
+
+struct Configuration {
+    std::vector<::aidl::android::media::audio::common::AudioPort> ports;
+    std::vector<::aidl::android::media::audio::common::AudioPortConfig> portConfigs;
+    std::vector<::aidl::android::media::audio::common::AudioPortConfig> initialConfigs;
+    // Port id -> List of profiles to use when the device port state is set to 'connected'.
+    std::map<int32_t, std::vector<::aidl::android::media::audio::common::AudioProfile>>
+            connectedProfiles;
+    std::vector<AudioRoute> routes;
+    std::vector<AudioPatch> patches;
+    int32_t nextPortId = 1;
+    int32_t nextPatchId = 1;
+};
+
+Configuration& getNullPrimaryConfiguration();
+
+}  // namespace aidl::android::hardware::audio::core::internal
diff --git a/audio/aidl/default/include/core-impl/Module.h b/audio/aidl/default/include/core-impl/Module.h
new file mode 100644
index 0000000..81a02ba
--- /dev/null
+++ b/audio/aidl/default/include/core-impl/Module.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <map>
+#include <memory>
+#include <set>
+
+#include <aidl/android/hardware/audio/core/BnModule.h>
+
+#include "core-impl/Configuration.h"
+#include "core-impl/Stream.h"
+
+namespace aidl::android::hardware::audio::core {
+
+class Module : public BnModule {
+    ndk::ScopedAStatus setModuleDebug(
+            const ::aidl::android::hardware::audio::core::ModuleDebug& in_debug) override;
+    ndk::ScopedAStatus connectExternalDevice(
+            const ::aidl::android::media::audio::common::AudioPort& in_templateIdAndAdditionalData,
+            ::aidl::android::media::audio::common::AudioPort* _aidl_return) override;
+    ndk::ScopedAStatus disconnectExternalDevice(int32_t in_portId) override;
+    ndk::ScopedAStatus getAudioPatches(std::vector<AudioPatch>* _aidl_return) override;
+    ndk::ScopedAStatus getAudioPort(
+            int32_t in_portId,
+            ::aidl::android::media::audio::common::AudioPort* _aidl_return) override;
+    ndk::ScopedAStatus getAudioPortConfigs(
+            std::vector<::aidl::android::media::audio::common::AudioPortConfig>* _aidl_return)
+            override;
+    ndk::ScopedAStatus getAudioPorts(
+            std::vector<::aidl::android::media::audio::common::AudioPort>* _aidl_return) override;
+    ndk::ScopedAStatus getAudioRoutes(std::vector<AudioRoute>* _aidl_return) override;
+    ndk::ScopedAStatus getAudioRoutesForAudioPort(
+            int32_t in_portId,
+            std::vector<::aidl::android::hardware::audio::core::AudioRoute>* _aidl_return) override;
+    ndk::ScopedAStatus openInputStream(
+            int32_t in_portConfigId,
+            const ::aidl::android::hardware::audio::common::SinkMetadata& in_sinkMetadata,
+            std::shared_ptr<IStreamIn>* _aidl_return) override;
+    ndk::ScopedAStatus openOutputStream(
+            int32_t in_portConfigId,
+            const ::aidl::android::hardware::audio::common::SourceMetadata& in_sourceMetadata,
+            const std::optional<::aidl::android::media::audio::common::AudioOffloadInfo>&
+                    in_offloadInfo,
+            std::shared_ptr<IStreamOut>* _aidl_return) override;
+    ndk::ScopedAStatus setAudioPatch(const AudioPatch& in_requested,
+                                     AudioPatch* _aidl_return) override;
+    ndk::ScopedAStatus setAudioPortConfig(
+            const ::aidl::android::media::audio::common::AudioPortConfig& in_requested,
+            ::aidl::android::media::audio::common::AudioPortConfig* out_suggested,
+            bool* _aidl_return) override;
+    ndk::ScopedAStatus resetAudioPatch(int32_t in_patchId) override;
+    ndk::ScopedAStatus resetAudioPortConfig(int32_t in_portConfigId) override;
+
+  private:
+    void cleanUpPatch(int32_t patchId);
+    void cleanUpPatches(int32_t portConfigId);
+    internal::Configuration& getConfig();
+    void registerPatch(const AudioPatch& patch);
+
+    std::unique_ptr<internal::Configuration> mConfig;
+    ModuleDebug mDebug;
+    // ids of ports created at runtime via 'connectExternalDevice'.
+    std::set<int32_t> mConnectedDevicePorts;
+    Streams mStreams;
+    // Maps port ids and port config ids to patch ids.
+    // Multimap because both ports and configs can be used by multiple patches.
+    std::multimap<int32_t, int32_t> mPatches;
+};
+
+}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/include/core-impl/Stream.h b/audio/aidl/default/include/core-impl/Stream.h
new file mode 100644
index 0000000..87104dd
--- /dev/null
+++ b/audio/aidl/default/include/core-impl/Stream.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <map>
+#include <optional>
+#include <variant>
+
+#include <aidl/android/hardware/audio/common/SinkMetadata.h>
+#include <aidl/android/hardware/audio/common/SourceMetadata.h>
+#include <aidl/android/hardware/audio/core/BnStreamIn.h>
+#include <aidl/android/hardware/audio/core/BnStreamOut.h>
+#include <aidl/android/media/audio/common/AudioOffloadInfo.h>
+
+#include "core-impl/utils.h"
+
+namespace aidl::android::hardware::audio::core {
+
+class StreamIn : public BnStreamIn {
+    ndk::ScopedAStatus close() override;
+    ndk::ScopedAStatus updateMetadata(
+            const ::aidl::android::hardware::audio::common::SinkMetadata& in_sinkMetadata) override;
+
+  public:
+    explicit StreamIn(const ::aidl::android::hardware::audio::common::SinkMetadata& sinkMetadata);
+    bool isClosed() const { return mIsClosed; }
+
+  private:
+    ::aidl::android::hardware::audio::common::SinkMetadata mMetadata;
+    bool mIsClosed = false;
+};
+
+class StreamOut : public BnStreamOut {
+    ndk::ScopedAStatus close() override;
+    ndk::ScopedAStatus updateMetadata(
+            const ::aidl::android::hardware::audio::common::SourceMetadata& in_sourceMetadata)
+            override;
+
+  public:
+    StreamOut(const ::aidl::android::hardware::audio::common::SourceMetadata& sourceMetadata,
+              const std::optional<::aidl::android::media::audio::common::AudioOffloadInfo>&
+                      offloadInfo);
+    bool isClosed() const { return mIsClosed; }
+
+  private:
+    ::aidl::android::hardware::audio::common::SourceMetadata mMetadata;
+    std::optional<::aidl::android::media::audio::common::AudioOffloadInfo> mOffloadInfo;
+    bool mIsClosed = false;
+};
+
+class StreamWrapper {
+  public:
+    explicit StreamWrapper(std::shared_ptr<StreamIn> streamIn) : mStream(streamIn) {}
+    explicit StreamWrapper(std::shared_ptr<StreamOut> streamOut) : mStream(streamOut) {}
+    bool isStreamOpen() const {
+        return std::visit(
+                [](auto&& ws) -> bool {
+                    auto s = ws.lock();
+                    return s && !s->isClosed();
+                },
+                mStream);
+    }
+
+  private:
+    std::variant<std::weak_ptr<StreamIn>, std::weak_ptr<StreamOut>> mStream;
+};
+
+class Streams {
+  public:
+    Streams() = default;
+    Streams(const Streams&) = delete;
+    Streams& operator=(const Streams&) = delete;
+    size_t count(int32_t id) {
+        // Streams do not remove themselves from the collection on close.
+        erase_if(mStreams, [](const auto& pair) { return !pair.second.isStreamOpen(); });
+        return mStreams.count(id);
+    }
+    void insert(int32_t portId, int32_t portConfigId, StreamWrapper sw) {
+        mStreams.insert(std::pair{portConfigId, sw});
+        mStreams.insert(std::pair{portId, sw});
+    }
+
+  private:
+    // Maps port ids and port config ids to streams. Multimap because a port
+    // (not port config) can have multiple streams opened on it.
+    std::multimap<int32_t, StreamWrapper> mStreams;
+};
+
+}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/include/core-impl/utils.h b/audio/aidl/default/include/core-impl/utils.h
new file mode 100644
index 0000000..9d06f08
--- /dev/null
+++ b/audio/aidl/default/include/core-impl/utils.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <algorithm>
+#include <set>
+#include <vector>
+
+namespace aidl::android::hardware::audio::core {
+
+// Return whether all the elements in the vector are unique.
+template <typename T>
+bool all_unique(const std::vector<T>& v) {
+    return std::set<T>(v.begin(), v.end()).size() == v.size();
+}
+
+// Erase all the specified elements from a map.
+template <typename C, typename V>
+auto erase_all(C& c, const V& keys) {
+    auto oldSize = c.size();
+    for (auto& k : keys) {
+        c.erase(k);
+    }
+    return oldSize - c.size();
+}
+
+// Erase all the elements in the container that satisfy the provided predicate.
+template <typename C, typename P>
+auto erase_if(C& c, P pred) {
+    auto oldSize = c.size();
+    for (auto it = c.begin(); it != c.end();) {
+        if (pred(*it)) {
+            it = c.erase(it);
+        } else {
+            ++it;
+        }
+    }
+    return oldSize - c.size();
+}
+
+// Erase all the elements in the map that have specified values.
+template <typename C, typename V>
+auto erase_all_values(C& c, const V& values) {
+    return erase_if(c, [values](const auto& pair) { return values.count(pair.second) != 0; });
+}
+
+// Return non-zero count of elements for any of the provided keys.
+template <typename M, typename V>
+size_t count_any(const M& m, const V& keys) {
+    for (auto& k : keys) {
+        if (size_t c = m.count(k); c != 0) return c;
+    }
+    return 0;
+}
+
+// Assuming that M is a map whose values have an 'id' field,
+// find an element with the specified id.
+template <typename M>
+auto findById(M& m, int32_t id) {
+    return std::find_if(m.begin(), m.end(), [&](const auto& p) { return p.second.id == id; });
+}
+
+// Assuming that the vector contains elements with an 'id' field,
+// find an element with the specified id.
+template <typename T>
+auto findById(std::vector<T>& v, int32_t id) {
+    return std::find_if(v.begin(), v.end(), [&](const auto& e) { return e.id == id; });
+}
+
+// Return elements from the vector that have specified ids, also
+// optionally return which ids were not found.
+template <typename T>
+std::vector<T*> selectByIds(std::vector<T>& v, const std::vector<int32_t>& ids,
+                            std::vector<int32_t>* missingIds = nullptr) {
+    std::vector<T*> result;
+    std::set<int32_t> idsSet(ids.begin(), ids.end());
+    for (size_t i = 0; i < v.size(); ++i) {
+        T& e = v[i];
+        if (idsSet.count(e.id) != 0) {
+            result.push_back(&v[i]);
+            idsSet.erase(e.id);
+        }
+    }
+    if (missingIds) {
+        *missingIds = std::vector(idsSet.begin(), idsSet.end());
+    }
+    return result;
+}
+
+}  // namespace aidl::android::hardware::audio::core
diff --git a/audio/aidl/default/main.cpp b/audio/aidl/default/main.cpp
new file mode 100644
index 0000000..aeb9983
--- /dev/null
+++ b/audio/aidl/default/main.cpp
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "core-impl/Config.h"
+#include "core-impl/Module.h"
+
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+using aidl::android::hardware::audio::core::Config;
+using aidl::android::hardware::audio::core::Module;
+
+int main() {
+    // This is a debug implementation, always enable debug logging.
+    android::base::SetMinimumLogSeverity(::android::base::DEBUG);
+    ABinderProcess_setThreadPoolMaxThreadCount(16);
+
+    // Make the default config service
+    auto config = ndk::SharedRefBase::make<Config>();
+    const std::string configName = std::string() + Config::descriptor + "/default";
+    binder_status_t status =
+            AServiceManager_addService(config->asBinder().get(), configName.c_str());
+    CHECK_EQ(STATUS_OK, status);
+
+    // Make the default module
+    auto moduleDefault = ndk::SharedRefBase::make<Module>();
+    const std::string moduleDefaultName = std::string() + Module::descriptor + "/default";
+    status = AServiceManager_addService(moduleDefault->asBinder().get(), moduleDefaultName.c_str());
+    CHECK_EQ(STATUS_OK, status);
+
+    ABinderProcess_joinThreadPool();
+    return EXIT_FAILURE;  // should not reach
+}
diff --git a/audio/aidl/vts/Android.bp b/audio/aidl/vts/Android.bp
new file mode 100644
index 0000000..cd5915b
--- /dev/null
+++ b/audio/aidl/vts/Android.bp
@@ -0,0 +1,32 @@
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_test {
+    name: "VtsHalAudioCoreTargetTest",
+    defaults: [
+        "VtsHalTargetTestDefaults",
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: [
+        "ModuleConfig.cpp",
+        "VtsHalAudioCoreTargetTest.cpp",
+    ],
+    shared_libs: [
+        "libbinder_ndk",
+    ],
+    static_libs: [
+        "android.hardware.audio.common-V1-ndk",
+        "android.hardware.audio.core-V1-ndk",
+        "android.media.audio.common.types-V1-ndk",
+    ],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+}
diff --git a/audio/aidl/vts/ModuleConfig.cpp b/audio/aidl/vts/ModuleConfig.cpp
new file mode 100644
index 0000000..969b0e9
--- /dev/null
+++ b/audio/aidl/vts/ModuleConfig.cpp
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <algorithm>
+#include <chrono>
+
+#include <aidl/android/media/audio/common/AudioIoFlags.h>
+#include <aidl/android/media/audio/common/AudioOutputFlags.h>
+
+#include "ModuleConfig.h"
+
+using namespace android;
+using namespace std::chrono_literals;
+
+using aidl::android::hardware::audio::core::IModule;
+using aidl::android::media::audio::common::AudioChannelLayout;
+using aidl::android::media::audio::common::AudioEncapsulationMode;
+using aidl::android::media::audio::common::AudioFormatDescription;
+using aidl::android::media::audio::common::AudioFormatType;
+using aidl::android::media::audio::common::AudioIoFlags;
+using aidl::android::media::audio::common::AudioOffloadInfo;
+using aidl::android::media::audio::common::AudioOutputFlags;
+using aidl::android::media::audio::common::AudioPort;
+using aidl::android::media::audio::common::AudioPortConfig;
+using aidl::android::media::audio::common::AudioPortExt;
+using aidl::android::media::audio::common::AudioProfile;
+using aidl::android::media::audio::common::AudioUsage;
+using aidl::android::media::audio::common::Int;
+
+// static
+std::optional<AudioOffloadInfo> ModuleConfig::generateOffloadInfoIfNeeded(
+        const AudioPortConfig& portConfig) {
+    if (portConfig.flags.has_value() &&
+        portConfig.flags.value().getTag() == AudioIoFlags::Tag::output &&
+        (portConfig.flags.value().get<AudioIoFlags::Tag::output>() &
+         1 << static_cast<int>(AudioOutputFlags::COMPRESS_OFFLOAD)) != 0) {
+        AudioOffloadInfo offloadInfo;
+        offloadInfo.base.sampleRate = portConfig.sampleRate.value().value;
+        offloadInfo.base.channelMask = portConfig.channelMask.value();
+        offloadInfo.base.format = portConfig.format.value();
+        offloadInfo.bitRatePerSecond = 256;                                // Arbitrary value.
+        offloadInfo.durationUs = std::chrono::microseconds(1min).count();  // Arbitrary value.
+        offloadInfo.usage = AudioUsage::MEDIA;
+        offloadInfo.encapsulationMode = AudioEncapsulationMode::NONE;
+        return offloadInfo;
+    }
+    return {};
+}
+
+template <typename T>
+auto findById(const std::vector<T>& v, int32_t id) {
+    return std::find_if(v.begin(), v.end(), [&](const auto& p) { return p.id == id; });
+}
+
+ModuleConfig::ModuleConfig(IModule* module) {
+    mStatus = module->getAudioPorts(&mPorts);
+    if (!mStatus.isOk()) return;
+    for (const auto& port : mPorts) {
+        if (port.ext.getTag() != AudioPortExt::Tag::device) continue;
+        const auto& devicePort = port.ext.get<AudioPortExt::Tag::device>();
+        if (devicePort.device.type.connection.empty()) {
+            const bool isInput = port.flags.getTag() == AudioIoFlags::Tag::input;
+            // Permanently attached device.
+            if (isInput) {
+                mAttachedSourceDevicePorts.insert(port.id);
+            } else {
+                mAttachedSinkDevicePorts.insert(port.id);
+            }
+        } else if (port.profiles.empty()) {
+            mExternalDevicePorts.insert(port.id);
+        }
+    }
+    if (!mStatus.isOk()) return;
+    mStatus = module->getAudioRoutes(&mRoutes);
+    if (!mStatus.isOk()) return;
+    mStatus = module->getAudioPortConfigs(&mInitialConfigs);
+}
+
+std::vector<AudioPort> ModuleConfig::getAttachedDevicePorts() const {
+    std::vector<AudioPort> result;
+    std::copy_if(mPorts.begin(), mPorts.end(), std::back_inserter(result), [&](const auto& port) {
+        return mAttachedSinkDevicePorts.count(port.id) != 0 ||
+               mAttachedSourceDevicePorts.count(port.id) != 0;
+    });
+    return result;
+}
+
+std::vector<AudioPort> ModuleConfig::getExternalDevicePorts() const {
+    std::vector<AudioPort> result;
+    std::copy_if(mPorts.begin(), mPorts.end(), std::back_inserter(result),
+                 [&](const auto& port) { return mExternalDevicePorts.count(port.id) != 0; });
+    return result;
+}
+
+std::vector<AudioPort> ModuleConfig::getInputMixPorts() const {
+    std::vector<AudioPort> result;
+    std::copy_if(mPorts.begin(), mPorts.end(), std::back_inserter(result), [](const auto& port) {
+        return port.ext.getTag() == AudioPortExt::Tag::mix &&
+               port.flags.getTag() == AudioIoFlags::Tag::input;
+    });
+    return result;
+}
+
+std::vector<AudioPort> ModuleConfig::getOutputMixPorts() const {
+    std::vector<AudioPort> result;
+    std::copy_if(mPorts.begin(), mPorts.end(), std::back_inserter(result), [](const auto& port) {
+        return port.ext.getTag() == AudioPortExt::Tag::mix &&
+               port.flags.getTag() == AudioIoFlags::Tag::output;
+    });
+    return result;
+}
+
+std::vector<AudioPort> ModuleConfig::getAttachedSinkDevicesPortsForMixPort(
+        const AudioPort& mixPort) const {
+    std::vector<AudioPort> result;
+    for (const auto& route : mRoutes) {
+        if (mAttachedSinkDevicePorts.count(route.sinkPortId) != 0 &&
+            std::find(route.sourcePortIds.begin(), route.sourcePortIds.end(), mixPort.id) !=
+                    route.sourcePortIds.end()) {
+            const auto devicePortIt = findById<AudioPort>(mPorts, route.sinkPortId);
+            if (devicePortIt != mPorts.end()) result.push_back(*devicePortIt);
+        }
+    }
+    return result;
+}
+
+std::vector<AudioPort> ModuleConfig::getAttachedSourceDevicesPortsForMixPort(
+        const AudioPort& mixPort) const {
+    std::vector<AudioPort> result;
+    for (const auto& route : mRoutes) {
+        if (route.sinkPortId == mixPort.id) {
+            for (const auto srcId : route.sourcePortIds) {
+                if (mAttachedSourceDevicePorts.count(srcId) != 0) {
+                    const auto devicePortIt = findById<AudioPort>(mPorts, srcId);
+                    if (devicePortIt != mPorts.end()) result.push_back(*devicePortIt);
+                }
+            }
+        }
+    }
+    return result;
+}
+
+std::optional<AudioPort> ModuleConfig::getSourceMixPortForAttachedDevice() const {
+    for (const auto& route : mRoutes) {
+        if (mAttachedSinkDevicePorts.count(route.sinkPortId) != 0) {
+            const auto mixPortIt = findById<AudioPort>(mPorts, route.sourcePortIds[0]);
+            if (mixPortIt != mPorts.end()) return *mixPortIt;
+        }
+    }
+    return {};
+}
+
+std::optional<ModuleConfig::SrcSinkPair> ModuleConfig::getNonRoutableSrcSinkPair(
+        bool isInput) const {
+    const auto mixPorts = getMixPorts(isInput);
+    std::set<std::pair<int32_t, int32_t>> allowedRoutes;
+    for (const auto& route : mRoutes) {
+        for (const auto srcPortId : route.sourcePortIds) {
+            allowedRoutes.emplace(std::make_pair(srcPortId, route.sinkPortId));
+        }
+    }
+    auto make_pair = [isInput](auto& device, auto& mix) {
+        return isInput ? std::make_pair(device, mix) : std::make_pair(mix, device);
+    };
+    for (const auto portId : isInput ? mAttachedSourceDevicePorts : mAttachedSinkDevicePorts) {
+        const auto devicePortIt = findById<AudioPort>(mPorts, portId);
+        if (devicePortIt == mPorts.end()) continue;
+        auto devicePortConfig = getSingleConfigForDevicePort(*devicePortIt);
+        for (const auto& mixPort : mixPorts) {
+            if (std::find(allowedRoutes.begin(), allowedRoutes.end(),
+                          make_pair(portId, mixPort.id)) == allowedRoutes.end()) {
+                auto mixPortConfig = getSingleConfigForMixPort(isInput, mixPort);
+                if (mixPortConfig.has_value()) {
+                    return make_pair(devicePortConfig, mixPortConfig.value());
+                }
+            }
+        }
+    }
+    return {};
+}
+
+std::optional<ModuleConfig::SrcSinkPair> ModuleConfig::getRoutableSrcSinkPair(bool isInput) const {
+    if (isInput) {
+        for (const auto& route : mRoutes) {
+            auto srcPortIdIt = std::find_if(
+                    route.sourcePortIds.begin(), route.sourcePortIds.end(),
+                    [&](const auto& portId) { return mAttachedSourceDevicePorts.count(portId); });
+            if (srcPortIdIt == route.sourcePortIds.end()) continue;
+            const auto devicePortIt = findById<AudioPort>(mPorts, *srcPortIdIt);
+            const auto mixPortIt = findById<AudioPort>(mPorts, route.sinkPortId);
+            if (devicePortIt == mPorts.end() || mixPortIt == mPorts.end()) continue;
+            auto devicePortConfig = getSingleConfigForDevicePort(*devicePortIt);
+            auto mixPortConfig = getSingleConfigForMixPort(isInput, *mixPortIt);
+            if (!mixPortConfig.has_value()) continue;
+            return std::make_pair(devicePortConfig, mixPortConfig.value());
+        }
+    } else {
+        for (const auto& route : mRoutes) {
+            if (mAttachedSinkDevicePorts.count(route.sinkPortId) == 0) continue;
+            const auto mixPortIt = findById<AudioPort>(mPorts, route.sourcePortIds[0]);
+            const auto devicePortIt = findById<AudioPort>(mPorts, route.sinkPortId);
+            if (devicePortIt == mPorts.end() || mixPortIt == mPorts.end()) continue;
+            auto mixPortConfig = getSingleConfigForMixPort(isInput, *mixPortIt);
+            auto devicePortConfig = getSingleConfigForDevicePort(*devicePortIt);
+            if (!mixPortConfig.has_value()) continue;
+            return std::make_pair(mixPortConfig.value(), devicePortConfig);
+        }
+    }
+    return {};
+}
+
+std::vector<ModuleConfig::SrcSinkGroup> ModuleConfig::getRoutableSrcSinkGroups(bool isInput) const {
+    std::vector<SrcSinkGroup> result;
+    if (isInput) {
+        for (const auto& route : mRoutes) {
+            std::vector<int32_t> srcPortIds;
+            std::copy_if(route.sourcePortIds.begin(), route.sourcePortIds.end(),
+                         std::back_inserter(srcPortIds), [&](const auto& portId) {
+                             return mAttachedSourceDevicePorts.count(portId);
+                         });
+            if (srcPortIds.empty()) continue;
+            const auto mixPortIt = findById<AudioPort>(mPorts, route.sinkPortId);
+            if (mixPortIt == mPorts.end()) continue;
+            auto mixPortConfig = getSingleConfigForMixPort(isInput, *mixPortIt);
+            if (!mixPortConfig.has_value()) continue;
+            std::vector<SrcSinkPair> pairs;
+            for (const auto srcPortId : srcPortIds) {
+                const auto devicePortIt = findById<AudioPort>(mPorts, srcPortId);
+                if (devicePortIt == mPorts.end()) continue;
+                // Using all configs for every source would be too much.
+                auto devicePortConfig = getSingleConfigForDevicePort(*devicePortIt);
+                pairs.emplace_back(devicePortConfig, mixPortConfig.value());
+            }
+            if (!pairs.empty()) {
+                result.emplace_back(route, std::move(pairs));
+            }
+        }
+    } else {
+        for (const auto& route : mRoutes) {
+            if (mAttachedSinkDevicePorts.count(route.sinkPortId) == 0) continue;
+            const auto devicePortIt = findById<AudioPort>(mPorts, route.sinkPortId);
+            if (devicePortIt == mPorts.end()) continue;
+            auto devicePortConfig = getSingleConfigForDevicePort(*devicePortIt);
+            std::vector<SrcSinkPair> pairs;
+            for (const auto srcPortId : route.sourcePortIds) {
+                const auto mixPortIt = findById<AudioPort>(mPorts, srcPortId);
+                if (mixPortIt == mPorts.end()) continue;
+                // Using all configs for every source would be too much.
+                auto mixPortConfig = getSingleConfigForMixPort(isInput, *mixPortIt);
+                if (mixPortConfig.has_value()) {
+                    pairs.emplace_back(mixPortConfig.value(), devicePortConfig);
+                }
+            }
+            if (!pairs.empty()) {
+                result.emplace_back(route, std::move(pairs));
+            }
+        }
+    }
+    return result;
+}
+
+std::string ModuleConfig::toString() const {
+    std::string result;
+    result.append("Ports: ");
+    result.append(android::internal::ToString(mPorts));
+    result.append("\nInitial configs: ");
+    result.append(android::internal::ToString(mInitialConfigs));
+    result.append("\nAttached sink device ports: ");
+    result.append(android::internal::ToString(mAttachedSinkDevicePorts));
+    result.append("\nAttached source device ports: ");
+    result.append(android::internal::ToString(mAttachedSourceDevicePorts));
+    result.append("\nExternal device ports: ");
+    result.append(android::internal::ToString(mExternalDevicePorts));
+    result.append("\nRoutes: ");
+    result.append(android::internal::ToString(mRoutes));
+    return result;
+}
+
+static size_t combineAudioConfigs(const AudioPort& port, const AudioProfile& profile,
+                                  std::vector<AudioPortConfig>* result) {
+    const size_t newConfigCount = profile.channelMasks.size() * profile.sampleRates.size();
+    result->reserve(result->capacity() + newConfigCount);
+    for (auto channelMask : profile.channelMasks) {
+        for (auto sampleRate : profile.sampleRates) {
+            AudioPortConfig config{};
+            config.portId = port.id;
+            Int sr;
+            sr.value = sampleRate;
+            config.sampleRate = sr;
+            config.channelMask = channelMask;
+            config.format = profile.format;
+            config.flags = port.flags;
+            config.ext = port.ext;
+            result->push_back(std::move(config));
+        }
+    }
+    return newConfigCount;
+}
+
+static bool isDynamicProfile(const AudioProfile& profile) {
+    return (profile.format.type == AudioFormatType::DEFAULT && profile.format.encoding.empty()) ||
+           profile.sampleRates.empty() || profile.channelMasks.empty();
+}
+
+std::vector<AudioPortConfig> ModuleConfig::generateAudioMixPortConfigs(
+        const std::vector<AudioPort>& ports, bool isInput, bool singleProfile) const {
+    std::vector<AudioPortConfig> result;
+    for (const auto& mixPort : ports) {
+        if (getAttachedDevicesPortsForMixPort(isInput, mixPort).empty()) {
+            continue;
+        }
+        for (const auto& profile : mixPort.profiles) {
+            if (isDynamicProfile(profile)) continue;
+            combineAudioConfigs(mixPort, profile, &result);
+            if (singleProfile && !result.empty()) {
+                result.resize(1);
+                return result;
+            }
+        }
+    }
+    return result;
+}
+
+std::vector<AudioPortConfig> ModuleConfig::generateAudioDevicePortConfigs(
+        const std::vector<AudioPort>& ports, bool singleProfile) const {
+    std::vector<AudioPortConfig> result;
+    for (const auto& devicePort : ports) {
+        const size_t resultSizeBefore = result.size();
+        for (const auto& profile : devicePort.profiles) {
+            combineAudioConfigs(devicePort, profile, &result);
+            if (singleProfile && !result.empty()) {
+                result.resize(1);
+                return result;
+            }
+        }
+        if (resultSizeBefore == result.size()) {
+            std::copy_if(mInitialConfigs.begin(), mInitialConfigs.end(), std::back_inserter(result),
+                         [&](const auto& config) { return config.portId == devicePort.id; });
+            if (resultSizeBefore == result.size()) {
+                AudioPortConfig empty;
+                empty.portId = devicePort.id;
+                empty.ext = devicePort.ext;
+                result.push_back(empty);
+            }
+        }
+        if (singleProfile) return result;
+    }
+    return result;
+}
diff --git a/audio/aidl/vts/ModuleConfig.h b/audio/aidl/vts/ModuleConfig.h
new file mode 100644
index 0000000..df13430
--- /dev/null
+++ b/audio/aidl/vts/ModuleConfig.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <optional>
+#include <set>
+#include <utility>
+#include <vector>
+
+#include <aidl/android/hardware/audio/core/AudioRoute.h>
+#include <aidl/android/hardware/audio/core/IModule.h>
+#include <aidl/android/media/audio/common/AudioOffloadInfo.h>
+#include <aidl/android/media/audio/common/AudioPort.h>
+
+class ModuleConfig {
+  public:
+    using SrcSinkPair = std::pair<aidl::android::media::audio::common::AudioPortConfig,
+                                  aidl::android::media::audio::common::AudioPortConfig>;
+    using SrcSinkGroup =
+            std::pair<aidl::android::hardware::audio::core::AudioRoute, std::vector<SrcSinkPair>>;
+
+    static std::optional<aidl::android::media::audio::common::AudioOffloadInfo>
+    generateOffloadInfoIfNeeded(
+            const aidl::android::media::audio::common::AudioPortConfig& portConfig);
+
+    explicit ModuleConfig(aidl::android::hardware::audio::core::IModule* module);
+    const ndk::ScopedAStatus& getStatus() const { return mStatus; }
+    std::string getError() const { return mStatus.getMessage(); }
+
+    std::vector<aidl::android::media::audio::common::AudioPort> getAttachedDevicePorts() const;
+    std::vector<aidl::android::media::audio::common::AudioPort> getExternalDevicePorts() const;
+    std::vector<aidl::android::media::audio::common::AudioPort> getInputMixPorts() const;
+    std::vector<aidl::android::media::audio::common::AudioPort> getOutputMixPorts() const;
+    std::vector<aidl::android::media::audio::common::AudioPort> getMixPorts(bool isInput) const {
+        return isInput ? getInputMixPorts() : getOutputMixPorts();
+    }
+
+    std::vector<aidl::android::media::audio::common::AudioPort> getAttachedDevicesPortsForMixPort(
+            bool isInput, const aidl::android::media::audio::common::AudioPort& mixPort) const {
+        return isInput ? getAttachedSourceDevicesPortsForMixPort(mixPort)
+                       : getAttachedSinkDevicesPortsForMixPort(mixPort);
+    }
+    std::vector<aidl::android::media::audio::common::AudioPort>
+    getAttachedSinkDevicesPortsForMixPort(
+            const aidl::android::media::audio::common::AudioPort& mixPort) const;
+    std::vector<aidl::android::media::audio::common::AudioPort>
+    getAttachedSourceDevicesPortsForMixPort(
+            const aidl::android::media::audio::common::AudioPort& mixPort) const;
+    std::optional<aidl::android::media::audio::common::AudioPort>
+    getSourceMixPortForAttachedDevice() const;
+
+    std::optional<SrcSinkPair> getNonRoutableSrcSinkPair(bool isInput) const;
+    std::optional<SrcSinkPair> getRoutableSrcSinkPair(bool isInput) const;
+    std::vector<SrcSinkGroup> getRoutableSrcSinkGroups(bool isInput) const;
+
+    std::vector<aidl::android::media::audio::common::AudioPortConfig>
+    getPortConfigsForAttachedDevicePorts() const {
+        return generateAudioDevicePortConfigs(getAttachedDevicePorts(), false);
+    }
+    std::vector<aidl::android::media::audio::common::AudioPortConfig> getPortConfigsForMixPorts()
+            const {
+        auto inputs = generateAudioMixPortConfigs(getInputMixPorts(), true, false);
+        auto outputs = generateAudioMixPortConfigs(getOutputMixPorts(), false, false);
+        inputs.insert(inputs.end(), outputs.begin(), outputs.end());
+        return inputs;
+    }
+    std::vector<aidl::android::media::audio::common::AudioPortConfig> getPortConfigsForMixPorts(
+            bool isInput) const {
+        return generateAudioMixPortConfigs(getMixPorts(isInput), isInput, false);
+    }
+    std::vector<aidl::android::media::audio::common::AudioPortConfig> getPortConfigsForMixPorts(
+            bool isInput, const aidl::android::media::audio::common::AudioPort& port) const {
+        return generateAudioMixPortConfigs({port}, isInput, false);
+    }
+    std::optional<aidl::android::media::audio::common::AudioPortConfig> getSingleConfigForMixPort(
+            bool isInput) const {
+        const auto config = generateAudioMixPortConfigs(getMixPorts(isInput), isInput, true);
+        if (!config.empty()) {
+            return *config.begin();
+        }
+        return {};
+    }
+    std::optional<aidl::android::media::audio::common::AudioPortConfig> getSingleConfigForMixPort(
+            bool isInput, const aidl::android::media::audio::common::AudioPort& port) const {
+        const auto config = generateAudioMixPortConfigs({port}, isInput, true);
+        if (!config.empty()) {
+            return *config.begin();
+        }
+        return {};
+    }
+
+    std::vector<aidl::android::media::audio::common::AudioPortConfig> getPortConfigsForDevicePort(
+            const aidl::android::media::audio::common::AudioPort& port) const {
+        return generateAudioDevicePortConfigs({port}, false);
+    }
+    aidl::android::media::audio::common::AudioPortConfig getSingleConfigForDevicePort(
+            const aidl::android::media::audio::common::AudioPort& port) const {
+        const auto config = generateAudioDevicePortConfigs({port}, true);
+        return *config.begin();
+    }
+
+    std::string toString() const;
+
+  private:
+    std::vector<aidl::android::media::audio::common::AudioPortConfig> generateAudioMixPortConfigs(
+            const std::vector<aidl::android::media::audio::common::AudioPort>& ports, bool isInput,
+            bool singleProfile) const;
+
+    // Unlike MixPorts, the generator for DevicePorts always returns a non-empty
+    // vector for a non-empty input port list. If there are no profiles in the
+    // port, its initial configs are looked up, if there are none,
+    // then an empty config is used, assuming further negotiation via setAudioPortConfig.
+    std::vector<aidl::android::media::audio::common::AudioPortConfig>
+    generateAudioDevicePortConfigs(
+            const std::vector<aidl::android::media::audio::common::AudioPort>& ports,
+            bool singleProfile) const;
+
+    ndk::ScopedAStatus mStatus = ndk::ScopedAStatus::ok();
+    std::vector<aidl::android::media::audio::common::AudioPort> mPorts;
+    std::vector<aidl::android::media::audio::common::AudioPortConfig> mInitialConfigs;
+    std::set<int32_t> mAttachedSinkDevicePorts;
+    std::set<int32_t> mAttachedSourceDevicePorts;
+    std::set<int32_t> mExternalDevicePorts;
+    std::vector<aidl::android::hardware::audio::core::AudioRoute> mRoutes;
+};
diff --git a/audio/aidl/vts/VtsHalAudioCoreTargetTest.cpp b/audio/aidl/vts/VtsHalAudioCoreTargetTest.cpp
new file mode 100644
index 0000000..bb24365
--- /dev/null
+++ b/audio/aidl/vts/VtsHalAudioCoreTargetTest.cpp
@@ -0,0 +1,1503 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <algorithm>
+#include <condition_variable>
+#include <memory>
+#include <mutex>
+#include <optional>
+#include <set>
+#include <string>
+
+#define LOG_TAG "VtsHalAudioCore"
+#include <android-base/logging.h>
+
+#include <aidl/Gtest.h>
+#include <aidl/Vintf.h>
+#include <aidl/android/hardware/audio/core/IConfig.h>
+#include <aidl/android/hardware/audio/core/IModule.h>
+#include <aidl/android/media/audio/common/AudioIoFlags.h>
+#include <aidl/android/media/audio/common/AudioOutputFlags.h>
+#include <android-base/properties.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+#include "ModuleConfig.h"
+
+using namespace android;
+using aidl::android::hardware::audio::common::PlaybackTrackMetadata;
+using aidl::android::hardware::audio::common::RecordTrackMetadata;
+using aidl::android::hardware::audio::common::SinkMetadata;
+using aidl::android::hardware::audio::common::SourceMetadata;
+using aidl::android::hardware::audio::core::AudioPatch;
+using aidl::android::hardware::audio::core::AudioRoute;
+using aidl::android::hardware::audio::core::IModule;
+using aidl::android::hardware::audio::core::IStreamIn;
+using aidl::android::hardware::audio::core::IStreamOut;
+using aidl::android::hardware::audio::core::ModuleDebug;
+using aidl::android::media::audio::common::AudioContentType;
+using aidl::android::media::audio::common::AudioDevice;
+using aidl::android::media::audio::common::AudioDeviceAddress;
+using aidl::android::media::audio::common::AudioDeviceType;
+using aidl::android::media::audio::common::AudioFormatType;
+using aidl::android::media::audio::common::AudioIoFlags;
+using aidl::android::media::audio::common::AudioOutputFlags;
+using aidl::android::media::audio::common::AudioPort;
+using aidl::android::media::audio::common::AudioPortConfig;
+using aidl::android::media::audio::common::AudioPortDeviceExt;
+using aidl::android::media::audio::common::AudioPortExt;
+using aidl::android::media::audio::common::AudioSource;
+using aidl::android::media::audio::common::AudioUsage;
+using ndk::ScopedAStatus;
+
+namespace ndk {
+std::ostream& operator<<(std::ostream& str, const ScopedAStatus& status) {
+    str << status.getDescription();
+    return str;
+}
+}  // namespace ndk
+
+template <typename T>
+auto findById(std::vector<T>& v, int32_t id) {
+    return std::find_if(v.begin(), v.end(), [&](const auto& e) { return e.id == id; });
+}
+
+template <typename C>
+std::vector<int32_t> GetNonExistentIds(const C& allIds) {
+    if (allIds.empty()) {
+        return std::vector<int32_t>{-1, 0, 1};
+    }
+    std::vector<int32_t> nonExistentIds;
+    nonExistentIds.push_back(*std::min_element(allIds.begin(), allIds.end()) - 1);
+    nonExistentIds.push_back(*std::max_element(allIds.begin(), allIds.end()) + 1);
+    return nonExistentIds;
+}
+
+AudioDeviceAddress GenerateUniqueDeviceAddress() {
+    static int nextId = 1;
+    // TODO: Use connection-specific ID.
+    return AudioDeviceAddress::make<AudioDeviceAddress::Tag::id>(std::to_string(++nextId));
+}
+
+struct AidlDeathRecipient {
+    const ndk::SpAIBinder binder;
+    const ndk::ScopedAIBinder_DeathRecipient recipient;
+    std::mutex mutex;
+    std::condition_variable condition;
+    bool fired = false;
+
+    explicit AidlDeathRecipient(const ndk::SpAIBinder& binder)
+        : binder(binder), recipient(AIBinder_DeathRecipient_new(&binderDiedCallbackAidl)) {}
+
+    binder_status_t linkToDeath() {
+        return AIBinder_linkToDeath(binder.get(), recipient.get(), this);
+    }
+
+    void binderDied() {
+        std::unique_lock<std::mutex> lock(mutex);
+        fired = true;
+        condition.notify_one();
+    };
+
+    bool waitForFired(int timeoutMs) {
+        std::unique_lock<std::mutex> lock(mutex);
+        condition.wait_for(lock, std::chrono::milliseconds(timeoutMs), [this]() { return fired; });
+        return fired;
+    }
+
+    static void binderDiedCallbackAidl(void* cookie) {
+        AidlDeathRecipient* self = static_cast<AidlDeathRecipient*>(cookie);
+        self->binderDied();
+    }
+};
+
+template <typename T>
+struct IsInput {
+    constexpr operator bool() const;
+};
+
+template <>
+constexpr IsInput<IStreamIn>::operator bool() const {
+    return true;
+}
+template <>
+constexpr IsInput<IStreamOut>::operator bool() const {
+    return false;
+}
+
+// All 'With*' classes are move-only because they are associated with some
+// resource or state of a HAL module.
+class WithDebugFlags {
+  public:
+    static WithDebugFlags createNested(const WithDebugFlags& parent) {
+        return WithDebugFlags(parent.mFlags);
+    }
+
+    WithDebugFlags() {}
+    explicit WithDebugFlags(const ModuleDebug& initial) : mInitial(initial), mFlags(initial) {}
+    WithDebugFlags(const WithDebugFlags&) = delete;
+    WithDebugFlags& operator=(const WithDebugFlags&) = delete;
+    ~WithDebugFlags() {
+        if (mModule != nullptr) {
+            ScopedAStatus status = mModule->setModuleDebug(mInitial);
+            EXPECT_EQ(EX_NONE, status.getExceptionCode()) << status;
+        }
+    }
+    void SetUp(IModule* module) {
+        ScopedAStatus status = module->setModuleDebug(mFlags);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    ModuleDebug& flags() { return mFlags; }
+
+  private:
+    ModuleDebug mInitial;
+    ModuleDebug mFlags;
+    IModule* mModule = nullptr;
+};
+
+// For consistency, WithAudioPortConfig can start both with a non-existent
+// port config, and with an existing one. Existence is determined by the
+// id of the provided config. If it's not 0, then WithAudioPortConfig is
+// essentially a no-op wrapper.
+class WithAudioPortConfig {
+  public:
+    WithAudioPortConfig() {}
+    explicit WithAudioPortConfig(const AudioPortConfig& config) : mInitialConfig(config) {}
+    WithAudioPortConfig(const WithAudioPortConfig&) = delete;
+    WithAudioPortConfig& operator=(const WithAudioPortConfig&) = delete;
+    ~WithAudioPortConfig() {
+        if (mModule != nullptr) {
+            ScopedAStatus status = mModule->resetAudioPortConfig(getId());
+            EXPECT_EQ(EX_NONE, status.getExceptionCode())
+                    << status << "; port config id " << getId();
+        }
+    }
+    void SetUp(IModule* module) {
+        ASSERT_NE(AudioPortExt::Tag::unspecified, mInitialConfig.ext.getTag())
+                << "config: " << mInitialConfig.toString();
+        // Negotiation is allowed for device ports because the HAL module is
+        // allowed to provide an empty profiles list for attached devices.
+        ASSERT_NO_FATAL_FAILURE(
+                SetUpImpl(module, mInitialConfig.ext.getTag() == AudioPortExt::Tag::device));
+    }
+    int32_t getId() const { return mConfig.id; }
+    const AudioPortConfig& get() const { return mConfig; }
+
+  private:
+    void SetUpImpl(IModule* module, bool negotiate) {
+        if (mInitialConfig.id == 0) {
+            AudioPortConfig suggested;
+            bool applied = false;
+            ScopedAStatus status = module->setAudioPortConfig(mInitialConfig, &suggested, &applied);
+            ASSERT_EQ(EX_NONE, status.getExceptionCode())
+                    << status << "; Config: " << mInitialConfig.toString();
+            if (!applied && negotiate) {
+                mInitialConfig = suggested;
+                ASSERT_NO_FATAL_FAILURE(SetUpImpl(module, false))
+                        << " while applying suggested config: " << suggested.toString();
+            } else {
+                ASSERT_TRUE(applied) << "Suggested: " << suggested.toString();
+                mConfig = suggested;
+                mModule = module;
+            }
+        } else {
+            mConfig = mInitialConfig;
+        }
+    }
+
+    AudioPortConfig mInitialConfig;
+    IModule* mModule = nullptr;
+    AudioPortConfig mConfig;
+};
+
+class AudioCoreModule : public testing::TestWithParam<std::string> {
+  public:
+    void SetUp() override {
+        ASSERT_NO_FATAL_FAILURE(ConnectToService());
+        debug.flags().simulateDeviceConnections = true;
+        ASSERT_NO_FATAL_FAILURE(debug.SetUp(module.get()));
+    }
+
+    void TearDown() override {
+        if (module != nullptr) {
+            ScopedAStatus status = module->setModuleDebug(ModuleDebug{});
+            EXPECT_EQ(EX_NONE, status.getExceptionCode())
+                    << status << " returned when resetting debug flags";
+        }
+    }
+
+    void ConnectToService() {
+        module = IModule::fromBinder(
+                ndk::SpAIBinder(AServiceManager_getService(GetParam().c_str())));
+        ASSERT_NE(module, nullptr);
+    }
+
+    void RestartService() {
+        ASSERT_NE(module, nullptr);
+        moduleConfig.reset();
+        deathHandler.reset(new AidlDeathRecipient(module->asBinder()));
+        ASSERT_EQ(STATUS_OK, deathHandler->linkToDeath());
+        ASSERT_TRUE(base::SetProperty("sys.audio.restart.hal", "1"));
+        EXPECT_TRUE(deathHandler->waitForFired(3000));
+        deathHandler.reset();
+        ASSERT_NO_FATAL_FAILURE(ConnectToService());
+    }
+
+    void ApplyEveryConfig(const std::vector<AudioPortConfig>& configs) {
+        for (const auto& config : configs) {
+            ASSERT_NE(0, config.portId);
+            WithAudioPortConfig portConfig(config);
+            ASSERT_NO_FATAL_FAILURE(portConfig.SetUp(module.get()));  // calls setAudioPortConfig
+            EXPECT_EQ(config.portId, portConfig.get().portId);
+            std::vector<AudioPortConfig> retrievedPortConfigs;
+            ScopedAStatus status = module->getAudioPortConfigs(&retrievedPortConfigs);
+            ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+            const int32_t portConfigId = portConfig.getId();
+            auto configIt = std::find_if(
+                    retrievedPortConfigs.begin(), retrievedPortConfigs.end(),
+                    [&portConfigId](const auto& retrConf) { return retrConf.id == portConfigId; });
+            EXPECT_NE(configIt, retrievedPortConfigs.end())
+                    << "Port config id returned by setAudioPortConfig: " << portConfigId
+                    << " is not found in the list returned by getAudioPortConfigs";
+            if (configIt != retrievedPortConfigs.end()) {
+                EXPECT_EQ(portConfig.get(), *configIt)
+                        << "Applied port config returned by setAudioPortConfig: "
+                        << portConfig.get().toString()
+                        << " is not the same as retrieved via getAudioPortConfigs: "
+                        << configIt->toString();
+            }
+        }
+    }
+
+    template <typename Entity>
+    void GetAllEntityIds(std::set<int32_t>* entityIds,
+                         ScopedAStatus (IModule::*getter)(std::vector<Entity>*),
+                         const std::string& errorMessage) {
+        std::vector<Entity> entities;
+        {
+            ScopedAStatus status = (module.get()->*getter)(&entities);
+            ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+        }
+        std::transform(entities.begin(), entities.end(),
+                       std::inserter(*entityIds, entityIds->begin()),
+                       [](const auto& entity) { return entity.id; });
+        EXPECT_EQ(entities.size(), entityIds->size()) << errorMessage;
+    }
+
+    void GetAllPatchIds(std::set<int32_t>* patchIds) {
+        return GetAllEntityIds<AudioPatch>(
+                patchIds, &IModule::getAudioPatches,
+                "IDs of audio patches returned by IModule.getAudioPatches are not unique");
+    }
+
+    void GetAllPortIds(std::set<int32_t>* portIds) {
+        return GetAllEntityIds<AudioPort>(
+                portIds, &IModule::getAudioPorts,
+                "IDs of audio ports returned by IModule.getAudioPorts are not unique");
+    }
+
+    void GetAllPortConfigIds(std::set<int32_t>* portConfigIds) {
+        return GetAllEntityIds<AudioPortConfig>(
+                portConfigIds, &IModule::getAudioPortConfigs,
+                "IDs of audio port configs returned by IModule.getAudioPortConfigs are not unique");
+    }
+
+    void SetUpModuleConfig() {
+        if (moduleConfig == nullptr) {
+            moduleConfig = std::make_unique<ModuleConfig>(module.get());
+            ASSERT_EQ(EX_NONE, moduleConfig->getStatus().getExceptionCode())
+                    << "ModuleConfig init error: " << moduleConfig->getError();
+        }
+    }
+
+    std::shared_ptr<IModule> module;
+    std::unique_ptr<AidlDeathRecipient> deathHandler;
+    std::unique_ptr<ModuleConfig> moduleConfig;
+    WithDebugFlags debug;
+};
+
+class WithDevicePortConnectedState {
+  public:
+    explicit WithDevicePortConnectedState(const AudioPort& idAndData) : mIdAndData(idAndData) {}
+    WithDevicePortConnectedState(const AudioPort& id, const AudioDeviceAddress& address)
+        : mIdAndData(setAudioPortAddress(id, address)) {}
+    WithDevicePortConnectedState(const WithDevicePortConnectedState&) = delete;
+    WithDevicePortConnectedState& operator=(const WithDevicePortConnectedState&) = delete;
+    ~WithDevicePortConnectedState() {
+        if (mModule != nullptr) {
+            ScopedAStatus status = mModule->disconnectExternalDevice(getId());
+            EXPECT_EQ(EX_NONE, status.getExceptionCode())
+                    << status << " returned when disconnecting device port ID " << getId();
+        }
+    }
+    void SetUp(IModule* module) {
+        ScopedAStatus status = module->connectExternalDevice(mIdAndData, &mConnectedPort);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode())
+                << status << " returned when connecting device port ID & data "
+                << mIdAndData.toString();
+        ASSERT_NE(mIdAndData.id, getId())
+                << "ID of the connected port must not be the same as the ID of the template port";
+        mModule = module;
+    }
+    int32_t getId() const { return mConnectedPort.id; }
+    const AudioPort& get() { return mConnectedPort; }
+
+  private:
+    static AudioPort setAudioPortAddress(const AudioPort& id, const AudioDeviceAddress& address) {
+        AudioPort result = id;
+        result.ext.get<AudioPortExt::Tag::device>().device.address = address;
+        return result;
+    }
+
+    const AudioPort mIdAndData;
+    IModule* mModule = nullptr;
+    AudioPort mConnectedPort;
+};
+
+template <typename Stream>
+class WithStream {
+  public:
+    WithStream() {}
+    explicit WithStream(const AudioPortConfig& portConfig) : mPortConfig(portConfig) {}
+    WithStream(const WithStream&) = delete;
+    WithStream& operator=(const WithStream&) = delete;
+    ~WithStream() {
+        if (mStream != nullptr) {
+            ScopedAStatus status = mStream->close();
+            EXPECT_EQ(EX_NONE, status.getExceptionCode())
+                    << status << "; port config id " << getPortId();
+        }
+    }
+    void SetUpPortConfig(IModule* module) { ASSERT_NO_FATAL_FAILURE(mPortConfig.SetUp(module)); }
+    ScopedAStatus SetUpNoChecks(IModule* module) {
+        return SetUpNoChecks(module, mPortConfig.get());
+    }
+    ScopedAStatus SetUpNoChecks(IModule* module, const AudioPortConfig& portConfig);
+    void SetUp(IModule* module) {
+        ASSERT_NO_FATAL_FAILURE(SetUpPortConfig(module));
+        ScopedAStatus status = SetUpNoChecks(module);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode())
+                << status << "; port config id " << getPortId();
+        ASSERT_NE(nullptr, mStream) << "; port config id " << getPortId();
+    }
+    Stream* get() const { return mStream.get(); }
+    std::shared_ptr<Stream> getSharedPointer() const { return mStream; }
+    const AudioPortConfig& getPortConfig() const { return mPortConfig.get(); }
+    int32_t getPortId() const { return mPortConfig.getId(); }
+
+  private:
+    WithAudioPortConfig mPortConfig;
+    std::shared_ptr<Stream> mStream;
+};
+
+SinkMetadata GenerateSinkMetadata(const AudioPortConfig& portConfig) {
+    RecordTrackMetadata trackMeta;
+    trackMeta.source = AudioSource::MIC;
+    trackMeta.gain = 1.0;
+    trackMeta.channelMask = portConfig.channelMask.value();
+    SinkMetadata metadata;
+    metadata.tracks.push_back(trackMeta);
+    return metadata;
+}
+
+template <>
+ScopedAStatus WithStream<IStreamIn>::SetUpNoChecks(IModule* module,
+                                                   const AudioPortConfig& portConfig) {
+    return module->openInputStream(portConfig.id, GenerateSinkMetadata(portConfig), &mStream);
+}
+
+SourceMetadata GenerateSourceMetadata(const AudioPortConfig& portConfig) {
+    PlaybackTrackMetadata trackMeta;
+    trackMeta.usage = AudioUsage::MEDIA;
+    trackMeta.contentType = AudioContentType::MUSIC;
+    trackMeta.gain = 1.0;
+    trackMeta.channelMask = portConfig.channelMask.value();
+    SourceMetadata metadata;
+    metadata.tracks.push_back(trackMeta);
+    return metadata;
+}
+
+template <>
+ScopedAStatus WithStream<IStreamOut>::SetUpNoChecks(IModule* module,
+                                                    const AudioPortConfig& portConfig) {
+    return module->openOutputStream(portConfig.id, GenerateSourceMetadata(portConfig),
+                                    ModuleConfig::generateOffloadInfoIfNeeded(portConfig),
+                                    &mStream);
+}
+
+class WithAudioPatch {
+  public:
+    WithAudioPatch() {}
+    WithAudioPatch(const AudioPortConfig& srcPortConfig, const AudioPortConfig& sinkPortConfig)
+        : mSrcPortConfig(srcPortConfig), mSinkPortConfig(sinkPortConfig) {}
+    WithAudioPatch(const WithAudioPatch&) = delete;
+    WithAudioPatch& operator=(const WithAudioPatch&) = delete;
+    ~WithAudioPatch() {
+        if (mModule != nullptr && mPatch.id != 0) {
+            ScopedAStatus status = mModule->resetAudioPatch(mPatch.id);
+            EXPECT_EQ(EX_NONE, status.getExceptionCode()) << status << "; patch id " << getId();
+        }
+    }
+    void SetUpPortConfigs(IModule* module) {
+        ASSERT_NO_FATAL_FAILURE(mSrcPortConfig.SetUp(module));
+        ASSERT_NO_FATAL_FAILURE(mSinkPortConfig.SetUp(module));
+    }
+    ScopedAStatus SetUpNoChecks(IModule* module) {
+        mModule = module;
+        mPatch.sourcePortConfigIds = std::vector<int32_t>{mSrcPortConfig.getId()};
+        mPatch.sinkPortConfigIds = std::vector<int32_t>{mSinkPortConfig.getId()};
+        return mModule->setAudioPatch(mPatch, &mPatch);
+    }
+    void SetUp(IModule* module) {
+        ASSERT_NO_FATAL_FAILURE(SetUpPortConfigs(module));
+        ScopedAStatus status = SetUpNoChecks(module);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode())
+                << status << "; source port config id " << mSrcPortConfig.getId()
+                << "; sink port config id " << mSinkPortConfig.getId();
+    }
+    int32_t getId() const { return mPatch.id; }
+    const AudioPatch& get() const { return mPatch; }
+
+  private:
+    WithAudioPortConfig mSrcPortConfig;
+    WithAudioPortConfig mSinkPortConfig;
+    IModule* mModule = nullptr;
+    AudioPatch mPatch;
+};
+
+TEST_P(AudioCoreModule, Published) {
+    // SetUp must complete with no failures.
+}
+
+TEST_P(AudioCoreModule, CanBeRestarted) {
+    ASSERT_NO_FATAL_FAILURE(RestartService());
+}
+
+TEST_P(AudioCoreModule, PortIdsAreUnique) {
+    std::set<int32_t> portIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortIds(&portIds));
+}
+
+TEST_P(AudioCoreModule, GetAudioPortsIsStable) {
+    std::vector<AudioPort> ports1;
+    {
+        ScopedAStatus status = module->getAudioPorts(&ports1);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    std::vector<AudioPort> ports2;
+    {
+        ScopedAStatus status = module->getAudioPorts(&ports2);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    ASSERT_EQ(ports1.size(), ports2.size())
+            << "Sizes of audio port arrays do not match across consequent calls to getAudioPorts";
+    std::sort(ports1.begin(), ports1.end());
+    std::sort(ports2.begin(), ports2.end());
+    EXPECT_EQ(ports1, ports2);
+}
+
+TEST_P(AudioCoreModule, GetAudioRoutesIsStable) {
+    std::vector<AudioRoute> routes1;
+    {
+        ScopedAStatus status = module->getAudioRoutes(&routes1);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    std::vector<AudioRoute> routes2;
+    {
+        ScopedAStatus status = module->getAudioRoutes(&routes2);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    ASSERT_EQ(routes1.size(), routes2.size())
+            << "Sizes of audio route arrays do not match across consequent calls to getAudioRoutes";
+    std::sort(routes1.begin(), routes1.end());
+    std::sort(routes2.begin(), routes2.end());
+    EXPECT_EQ(routes1, routes2);
+}
+
+TEST_P(AudioCoreModule, GetAudioRoutesAreValid) {
+    std::vector<AudioRoute> routes;
+    {
+        ScopedAStatus status = module->getAudioRoutes(&routes);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    for (const auto& route : routes) {
+        std::set<int32_t> sources(route.sourcePortIds.begin(), route.sourcePortIds.end());
+        EXPECT_NE(0, sources.size())
+                << "empty audio port sinks in the audio route: " << route.toString();
+        EXPECT_EQ(sources.size(), route.sourcePortIds.size())
+                << "IDs of audio port sinks are not unique in the audio route: "
+                << route.toString();
+    }
+}
+
+TEST_P(AudioCoreModule, GetAudioRoutesPortIdsAreValid) {
+    std::set<int32_t> portIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortIds(&portIds));
+    std::vector<AudioRoute> routes;
+    {
+        ScopedAStatus status = module->getAudioRoutes(&routes);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    for (const auto& route : routes) {
+        EXPECT_EQ(1, portIds.count(route.sinkPortId))
+                << route.sinkPortId << " sink port id is unknown";
+        for (const auto& source : route.sourcePortIds) {
+            EXPECT_EQ(1, portIds.count(source)) << source << " source port id is unknown";
+        }
+    }
+}
+
+TEST_P(AudioCoreModule, GetAudioRoutesForAudioPort) {
+    std::set<int32_t> portIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortIds(&portIds));
+    if (portIds.empty()) {
+        GTEST_SKIP() << "No ports in the module.";
+    }
+    for (const auto portId : portIds) {
+        std::vector<AudioRoute> routes;
+        ScopedAStatus status = module->getAudioRoutesForAudioPort(portId, &routes);
+        EXPECT_EQ(EX_NONE, status.getExceptionCode()) << status;
+        for (const auto& r : routes) {
+            if (r.sinkPortId != portId) {
+                const auto& srcs = r.sourcePortIds;
+                EXPECT_TRUE(std::find(srcs.begin(), srcs.end(), portId) != srcs.end())
+                        << " port ID " << portId << " does not used by the route " << r.toString();
+            }
+        }
+    }
+    for (const auto portId : GetNonExistentIds(portIds)) {
+        std::vector<AudioRoute> routes;
+        ScopedAStatus status = module->getAudioRoutesForAudioPort(portId, &routes);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for port ID " << portId;
+    }
+}
+
+TEST_P(AudioCoreModule, CheckDevicePorts) {
+    std::vector<AudioPort> ports;
+    {
+        ScopedAStatus status = module->getAudioPorts(&ports);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    std::optional<int32_t> defaultOutput, defaultInput;
+    std::set<AudioDevice> inputs, outputs;
+    const int defaultDeviceFlag = 1 << AudioPortDeviceExt::FLAG_INDEX_DEFAULT_DEVICE;
+    for (const auto& port : ports) {
+        if (port.ext.getTag() != AudioPortExt::Tag::device) continue;
+        const auto& devicePort = port.ext.get<AudioPortExt::Tag::device>();
+        EXPECT_NE(AudioDeviceType::NONE, devicePort.device.type.type);
+        EXPECT_NE(AudioDeviceType::IN_DEFAULT, devicePort.device.type.type);
+        EXPECT_NE(AudioDeviceType::OUT_DEFAULT, devicePort.device.type.type);
+        if (devicePort.device.type.type > AudioDeviceType::IN_DEFAULT &&
+            devicePort.device.type.type < AudioDeviceType::OUT_DEFAULT) {
+            EXPECT_EQ(AudioIoFlags::Tag::input, port.flags.getTag());
+        } else if (devicePort.device.type.type > AudioDeviceType::OUT_DEFAULT) {
+            EXPECT_EQ(AudioIoFlags::Tag::output, port.flags.getTag());
+        }
+        EXPECT_FALSE((devicePort.flags & defaultDeviceFlag) != 0 &&
+                     !devicePort.device.type.connection.empty())
+                << "Device port " << port.id
+                << " must be permanently attached to be set as default";
+        if ((devicePort.flags & defaultDeviceFlag) != 0) {
+            if (port.flags.getTag() == AudioIoFlags::Tag::output) {
+                EXPECT_FALSE(defaultOutput.has_value())
+                        << "At least two output device ports are declared as default: "
+                        << defaultOutput.value() << " and " << port.id;
+                defaultOutput = port.id;
+                EXPECT_EQ(0, outputs.count(devicePort.device))
+                        << "Non-unique output device: " << devicePort.device.toString();
+                outputs.insert(devicePort.device);
+            } else if (port.flags.getTag() == AudioIoFlags::Tag::input) {
+                EXPECT_FALSE(defaultInput.has_value())
+                        << "At least two input device ports are declared as default: "
+                        << defaultInput.value() << " and " << port.id;
+                defaultInput = port.id;
+                EXPECT_EQ(0, inputs.count(devicePort.device))
+                        << "Non-unique input device: " << devicePort.device.toString();
+                inputs.insert(devicePort.device);
+            } else {
+                FAIL() << "Invalid AudioIoFlags Tag: " << toString(port.flags.getTag());
+            }
+        }
+    }
+}
+
+TEST_P(AudioCoreModule, CheckMixPorts) {
+    std::vector<AudioPort> ports;
+    {
+        ScopedAStatus status = module->getAudioPorts(&ports);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    std::optional<int32_t> primaryMixPort;
+    constexpr int primaryOutputFlag = 1 << static_cast<int>(AudioOutputFlags::PRIMARY);
+    for (const auto& port : ports) {
+        if (port.ext.getTag() != AudioPortExt::Tag::mix) continue;
+        const auto& mixPort = port.ext.get<AudioPortExt::Tag::mix>();
+        if (port.flags.getTag() == AudioIoFlags::Tag::output &&
+            ((port.flags.get<AudioIoFlags::Tag::output>() & primaryOutputFlag) != 0)) {
+            EXPECT_FALSE(primaryMixPort.has_value())
+                    << "At least two mix ports have PRIMARY flag set: " << primaryMixPort.value()
+                    << " and " << port.id;
+            primaryMixPort = port.id;
+            EXPECT_EQ(1, mixPort.maxOpenStreamCount)
+                    << "Primary mix port " << port.id << " can not have maxOpenStreamCount "
+                    << mixPort.maxOpenStreamCount;
+        }
+    }
+}
+
+TEST_P(AudioCoreModule, GetAudioPort) {
+    std::set<int32_t> portIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortIds(&portIds));
+    if (portIds.empty()) {
+        GTEST_SKIP() << "No ports in the module.";
+    }
+    for (const auto portId : portIds) {
+        AudioPort port;
+        ScopedAStatus status = module->getAudioPort(portId, &port);
+        EXPECT_EQ(EX_NONE, status.getExceptionCode()) << status;
+        EXPECT_EQ(portId, port.id);
+    }
+    for (const auto portId : GetNonExistentIds(portIds)) {
+        AudioPort port;
+        ScopedAStatus status = module->getAudioPort(portId, &port);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for port ID " << portId;
+    }
+}
+
+TEST_P(AudioCoreModule, SetUpModuleConfig) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    // Send the module config to logcat to facilitate failures investigation.
+    LOG(INFO) << "SetUpModuleConfig: " << moduleConfig->toString();
+}
+
+// Verify that HAL module reports for a connected device port at least one non-dynamic profile,
+// that is, a profile with actual supported configuration.
+// Note: This test relies on simulation of external device connections by the HAL module.
+TEST_P(AudioCoreModule, GetAudioPortWithExternalDevices) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    std::vector<AudioPort> ports = moduleConfig->getExternalDevicePorts();
+    if (ports.empty()) {
+        GTEST_SKIP() << "No external devices in the module.";
+    }
+    for (const auto& port : ports) {
+        AudioPort portWithData = port;
+        portWithData.ext.get<AudioPortExt::Tag::device>().device.address =
+                GenerateUniqueDeviceAddress();
+        WithDevicePortConnectedState portConnected(portWithData);
+        ASSERT_NO_FATAL_FAILURE(portConnected.SetUp(module.get()));
+        const int32_t connectedPortId = portConnected.getId();
+        ASSERT_NE(portWithData.id, connectedPortId);
+        ASSERT_EQ(portWithData.ext.getTag(), portConnected.get().ext.getTag());
+        EXPECT_EQ(portWithData.ext.get<AudioPortExt::Tag::device>().device,
+                  portConnected.get().ext.get<AudioPortExt::Tag::device>().device);
+        // Verify that 'getAudioPort' and 'getAudioPorts' return the same connected port.
+        AudioPort connectedPort;
+        ScopedAStatus status = module->getAudioPort(connectedPortId, &connectedPort);
+        EXPECT_EQ(EX_NONE, status.getExceptionCode())
+                << status << " returned for getAudioPort port ID " << connectedPortId;
+        EXPECT_EQ(portConnected.get(), connectedPort);
+        const auto& portProfiles = connectedPort.profiles;
+        EXPECT_NE(0, portProfiles.size())
+                << "Connected port has no profiles: " << connectedPort.toString();
+        const auto dynamicProfileIt =
+                std::find_if(portProfiles.begin(), portProfiles.end(), [](const auto& profile) {
+                    return profile.format.type == AudioFormatType::DEFAULT;
+                });
+        EXPECT_EQ(portProfiles.end(), dynamicProfileIt) << "Connected port contains dynamic "
+                                                        << "profiles: " << connectedPort.toString();
+
+        std::vector<AudioPort> allPorts;
+        {
+            ScopedAStatus status = module->getAudioPorts(&allPorts);
+            ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+        }
+        const auto allPortsIt = findById(allPorts, connectedPortId);
+        EXPECT_NE(allPorts.end(), allPortsIt);
+        if (allPortsIt != allPorts.end()) {
+            EXPECT_EQ(portConnected.get(), *allPortsIt);
+        }
+    }
+}
+
+TEST_P(AudioCoreModule, OpenStreamInvalidPortConfigId) {
+    std::set<int32_t> portConfigIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortConfigIds(&portConfigIds));
+    for (const auto portConfigId : GetNonExistentIds(portConfigIds)) {
+        {
+            std::shared_ptr<IStreamIn> stream;
+            ScopedAStatus status = module->openInputStream(portConfigId, {}, &stream);
+            EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                    << status << " openInputStream returned for port config ID " << portConfigId;
+            EXPECT_EQ(nullptr, stream);
+        }
+        {
+            std::shared_ptr<IStreamOut> stream;
+            ScopedAStatus status = module->openOutputStream(portConfigId, {}, {}, &stream);
+            EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                    << status << " openOutputStream returned for port config ID " << portConfigId;
+            EXPECT_EQ(nullptr, stream);
+        }
+    }
+}
+
+TEST_P(AudioCoreModule, PortConfigIdsAreUnique) {
+    std::set<int32_t> portConfigIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortConfigIds(&portConfigIds));
+}
+
+TEST_P(AudioCoreModule, PortConfigPortIdsAreValid) {
+    std::set<int32_t> portIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortIds(&portIds));
+    std::vector<AudioPortConfig> portConfigs;
+    {
+        ScopedAStatus status = module->getAudioPortConfigs(&portConfigs);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    for (const auto& config : portConfigs) {
+        EXPECT_EQ(1, portIds.count(config.portId))
+                << config.portId << " port id is unknown, config id " << config.id;
+    }
+}
+
+TEST_P(AudioCoreModule, ResetAudioPortConfigInvalidId) {
+    std::set<int32_t> portConfigIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortConfigIds(&portConfigIds));
+    for (const auto portConfigId : GetNonExistentIds(portConfigIds)) {
+        ScopedAStatus status = module->resetAudioPortConfig(portConfigId);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for port config ID " << portConfigId;
+    }
+}
+
+// Verify that for the audio port configs provided by the HAL after init, resetting
+// the config does not delete it, but brings it back to the initial config.
+TEST_P(AudioCoreModule, ResetAudioPortConfigToInitialValue) {
+    std::vector<AudioPortConfig> portConfigsBefore;
+    {
+        ScopedAStatus status = module->getAudioPortConfigs(&portConfigsBefore);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    // TODO: Change port configs according to port profiles.
+    for (const auto& c : portConfigsBefore) {
+        ScopedAStatus status = module->resetAudioPortConfig(c.id);
+        EXPECT_EQ(EX_NONE, status.getExceptionCode())
+                << status << " returned for port config ID " << c.id;
+    }
+    std::vector<AudioPortConfig> portConfigsAfter;
+    {
+        ScopedAStatus status = module->getAudioPortConfigs(&portConfigsAfter);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    for (const auto& c : portConfigsBefore) {
+        auto afterIt = findById<AudioPortConfig>(portConfigsAfter, c.id);
+        EXPECT_NE(portConfigsAfter.end(), afterIt)
+                << " port config ID " << c.id << " was removed by reset";
+        if (afterIt != portConfigsAfter.end()) {
+            EXPECT_EQ(c, *afterIt);
+        }
+    }
+}
+
+TEST_P(AudioCoreModule, SetAudioPortConfigSuggestedConfig) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    auto srcMixPort = moduleConfig->getSourceMixPortForAttachedDevice();
+    if (!srcMixPort.has_value()) {
+        GTEST_SKIP() << "No mix port for attached output devices";
+    }
+    AudioPortConfig portConfig;
+    AudioPortConfig suggestedConfig;
+    portConfig.portId = srcMixPort.value().id;
+    {
+        bool applied = true;
+        ScopedAStatus status = module->setAudioPortConfig(portConfig, &suggestedConfig, &applied);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode())
+                << status << "; Config: " << portConfig.toString();
+        EXPECT_FALSE(applied);
+    }
+    EXPECT_EQ(0, suggestedConfig.id);
+    EXPECT_TRUE(suggestedConfig.sampleRate.has_value());
+    EXPECT_TRUE(suggestedConfig.channelMask.has_value());
+    EXPECT_TRUE(suggestedConfig.format.has_value());
+    EXPECT_TRUE(suggestedConfig.flags.has_value());
+    WithAudioPortConfig applied(suggestedConfig);
+    ASSERT_NO_FATAL_FAILURE(applied.SetUp(module.get()));
+    const AudioPortConfig& appliedConfig = applied.get();
+    EXPECT_NE(0, appliedConfig.id);
+    EXPECT_TRUE(appliedConfig.sampleRate.has_value());
+    EXPECT_EQ(suggestedConfig.sampleRate.value(), appliedConfig.sampleRate.value());
+    EXPECT_TRUE(appliedConfig.channelMask.has_value());
+    EXPECT_EQ(suggestedConfig.channelMask.value(), appliedConfig.channelMask.value());
+    EXPECT_TRUE(appliedConfig.format.has_value());
+    EXPECT_EQ(suggestedConfig.format.value(), appliedConfig.format.value());
+    EXPECT_TRUE(appliedConfig.flags.has_value());
+    EXPECT_EQ(suggestedConfig.flags.value(), appliedConfig.flags.value());
+}
+
+TEST_P(AudioCoreModule, SetAllAttachedDevicePortConfigs) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    ASSERT_NO_FATAL_FAILURE(ApplyEveryConfig(moduleConfig->getPortConfigsForAttachedDevicePorts()));
+}
+
+// Note: This test relies on simulation of external device connections by the HAL module.
+TEST_P(AudioCoreModule, SetAllExternalDevicePortConfigs) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    std::vector<AudioPort> ports = moduleConfig->getExternalDevicePorts();
+    if (ports.empty()) {
+        GTEST_SKIP() << "No external devices in the module.";
+    }
+    for (const auto& port : ports) {
+        WithDevicePortConnectedState portConnected(port, GenerateUniqueDeviceAddress());
+        ASSERT_NO_FATAL_FAILURE(portConnected.SetUp(module.get()));
+        ASSERT_NO_FATAL_FAILURE(
+                ApplyEveryConfig(moduleConfig->getPortConfigsForDevicePort(portConnected.get())));
+    }
+}
+
+TEST_P(AudioCoreModule, SetAllStaticAudioPortConfigs) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    ASSERT_NO_FATAL_FAILURE(ApplyEveryConfig(moduleConfig->getPortConfigsForMixPorts()));
+}
+
+TEST_P(AudioCoreModule, SetAudioPortConfigInvalidPortId) {
+    std::set<int32_t> portIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortIds(&portIds));
+    for (const auto portId : GetNonExistentIds(portIds)) {
+        AudioPortConfig portConfig, suggestedConfig;
+        bool applied;
+        portConfig.portId = portId;
+        ScopedAStatus status = module->setAudioPortConfig(portConfig, &suggestedConfig, &applied);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for port ID " << portId;
+        EXPECT_FALSE(suggestedConfig.format.has_value());
+        EXPECT_FALSE(suggestedConfig.channelMask.has_value());
+        EXPECT_FALSE(suggestedConfig.sampleRate.has_value());
+    }
+}
+
+TEST_P(AudioCoreModule, SetAudioPortConfigInvalidPortConfigId) {
+    std::set<int32_t> portConfigIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortConfigIds(&portConfigIds));
+    for (const auto portConfigId : GetNonExistentIds(portConfigIds)) {
+        AudioPortConfig portConfig, suggestedConfig;
+        bool applied;
+        portConfig.id = portConfigId;
+        ScopedAStatus status = module->setAudioPortConfig(portConfig, &suggestedConfig, &applied);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for port config ID " << portConfigId;
+        EXPECT_FALSE(suggestedConfig.format.has_value());
+        EXPECT_FALSE(suggestedConfig.channelMask.has_value());
+        EXPECT_FALSE(suggestedConfig.sampleRate.has_value());
+    }
+}
+
+TEST_P(AudioCoreModule, TryConnectMissingDevice) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    std::vector<AudioPort> ports = moduleConfig->getExternalDevicePorts();
+    if (ports.empty()) {
+        GTEST_SKIP() << "No external devices in the module.";
+    }
+    AudioPort ignored;
+    WithDebugFlags doNotSimulateConnections = WithDebugFlags::createNested(debug);
+    doNotSimulateConnections.flags().simulateDeviceConnections = false;
+    ASSERT_NO_FATAL_FAILURE(doNotSimulateConnections.SetUp(module.get()));
+    for (const auto& port : ports) {
+        AudioPort portWithData = port;
+        portWithData.ext.get<AudioPortExt::Tag::device>().device.address =
+                GenerateUniqueDeviceAddress();
+        ScopedAStatus status = module->connectExternalDevice(portWithData, &ignored);
+        EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                << status << " returned for static port " << portWithData.toString();
+    }
+}
+
+TEST_P(AudioCoreModule, TryChangingConnectionSimulationMidway) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    std::vector<AudioPort> ports = moduleConfig->getExternalDevicePorts();
+    if (ports.empty()) {
+        GTEST_SKIP() << "No external devices in the module.";
+    }
+    WithDevicePortConnectedState portConnected(*ports.begin(), GenerateUniqueDeviceAddress());
+    ASSERT_NO_FATAL_FAILURE(portConnected.SetUp(module.get()));
+    ModuleDebug midwayDebugChange = debug.flags();
+    midwayDebugChange.simulateDeviceConnections = false;
+    ScopedAStatus status = module->setModuleDebug(midwayDebugChange);
+    EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+            << status << " returned when trying to disable connections simulation "
+            << "while having a connected device";
+}
+
+TEST_P(AudioCoreModule, ConnectDisconnectExternalDeviceInvalidPorts) {
+    AudioPort ignored;
+    std::set<int32_t> portIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPortIds(&portIds));
+    for (const auto portId : GetNonExistentIds(portIds)) {
+        AudioPort invalidPort;
+        invalidPort.id = portId;
+        ScopedAStatus status = module->connectExternalDevice(invalidPort, &ignored);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for port ID " << portId << " when setting CONNECTED state";
+        status = module->disconnectExternalDevice(portId);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for port ID " << portId
+                << " when setting DISCONNECTED state";
+    }
+
+    std::vector<AudioPort> ports;
+    {
+        ScopedAStatus status = module->getAudioPorts(&ports);
+        ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+    }
+    for (const auto& port : ports) {
+        if (port.ext.getTag() != AudioPortExt::Tag::device) {
+            ScopedAStatus status = module->connectExternalDevice(port, &ignored);
+            EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                    << status << " returned for non-device port ID " << port.id
+                    << " when setting CONNECTED state";
+            status = module->disconnectExternalDevice(port.id);
+            EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                    << status << " returned for non-device port ID " << port.id
+                    << " when setting DISCONNECTED state";
+        } else {
+            const auto& devicePort = port.ext.get<AudioPortExt::Tag::device>();
+            if (devicePort.device.type.connection.empty()) {
+                ScopedAStatus status = module->connectExternalDevice(port, &ignored);
+                EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                        << status << " returned for permanently attached device port ID " << port.id
+                        << " when setting CONNECTED state";
+                status = module->disconnectExternalDevice(port.id);
+                EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                        << status << " returned for permanently attached device port ID " << port.id
+                        << " when setting DISCONNECTED state";
+            }
+        }
+    }
+}
+
+// Note: This test relies on simulation of external device connections by the HAL module.
+TEST_P(AudioCoreModule, ConnectDisconnectExternalDeviceTwice) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    AudioPort ignored;
+    std::vector<AudioPort> ports = moduleConfig->getExternalDevicePorts();
+    if (ports.empty()) {
+        GTEST_SKIP() << "No external devices in the module.";
+    }
+    for (const auto& port : ports) {
+        ScopedAStatus status = module->disconnectExternalDevice(port.id);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned when disconnecting already disconnected device port ID "
+                << port.id;
+        AudioPort portWithData = port;
+        portWithData.ext.get<AudioPortExt::Tag::device>().device.address =
+                GenerateUniqueDeviceAddress();
+        WithDevicePortConnectedState portConnected(portWithData);
+        ASSERT_NO_FATAL_FAILURE(portConnected.SetUp(module.get()));
+        status = module->connectExternalDevice(portConnected.get(), &ignored);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned when trying to connect a connected device port "
+                << portConnected.get().toString();
+        status = module->connectExternalDevice(portWithData, &ignored);
+        EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                << status << " returned when connecting again the external device "
+                << portWithData.ext.get<AudioPortExt::Tag::device>().device.toString();
+        if (status.getExceptionCode() == EX_NONE) {
+            ADD_FAILURE() << "Returned connected port " << ignored.toString() << " for template "
+                          << portWithData.toString();
+        }
+    }
+}
+
+// Note: This test relies on simulation of external device connections by the HAL module.
+TEST_P(AudioCoreModule, DisconnectExternalDeviceNonResetPortConfig) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    std::vector<AudioPort> ports = moduleConfig->getExternalDevicePorts();
+    if (ports.empty()) {
+        GTEST_SKIP() << "No external devices in the module.";
+    }
+    for (const auto& port : ports) {
+        WithDevicePortConnectedState portConnected(port, GenerateUniqueDeviceAddress());
+        ASSERT_NO_FATAL_FAILURE(portConnected.SetUp(module.get()));
+        const auto portConfig = moduleConfig->getSingleConfigForDevicePort(portConnected.get());
+        {
+            WithAudioPortConfig config(portConfig);
+            // Note: if SetUp fails, check the status of 'GetAudioPortWithExternalDevices' test.
+            // Our test assumes that 'getAudioPort' returns at least one profile, and it
+            // is not a dynamic profile.
+            ASSERT_NO_FATAL_FAILURE(config.SetUp(module.get()));
+            ScopedAStatus status = module->disconnectExternalDevice(portConnected.getId());
+            EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                    << status << " returned when trying to disconnect device port ID " << port.id
+                    << " with active configuration " << config.getId();
+        }
+    }
+}
+
+TEST_P(AudioCoreModule, ExternalDevicePortRoutes) {
+    ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    std::vector<AudioPort> ports = moduleConfig->getExternalDevicePorts();
+    if (ports.empty()) {
+        GTEST_SKIP() << "No external devices in the module.";
+    }
+    for (const auto& port : ports) {
+        std::vector<AudioRoute> routesBefore;
+        {
+            ScopedAStatus status = module->getAudioRoutes(&routesBefore);
+            ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+        }
+
+        int32_t connectedPortId;
+        {
+            WithDevicePortConnectedState portConnected(port, GenerateUniqueDeviceAddress());
+            ASSERT_NO_FATAL_FAILURE(portConnected.SetUp(module.get()));
+            connectedPortId = portConnected.getId();
+            std::vector<AudioRoute> connectedPortRoutes;
+            {
+                ScopedAStatus status =
+                        module->getAudioRoutesForAudioPort(connectedPortId, &connectedPortRoutes);
+                ASSERT_EQ(EX_NONE, status.getExceptionCode())
+                        << status << " returned when retrieving routes for connected port id "
+                        << connectedPortId;
+            }
+            // There must be routes for the port to be useful.
+            if (connectedPortRoutes.empty()) {
+                std::vector<AudioRoute> allRoutes;
+                ScopedAStatus status = module->getAudioRoutes(&allRoutes);
+                ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+                ADD_FAILURE() << " no routes returned for the connected port "
+                              << portConnected.get().toString()
+                              << "; all routes: " << android::internal::ToString(allRoutes);
+            }
+        }
+        std::vector<AudioRoute> ignored;
+        ScopedAStatus status = module->getAudioRoutesForAudioPort(connectedPortId, &ignored);
+        ASSERT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned when retrieving routes for released connected port id "
+                << connectedPortId;
+
+        std::vector<AudioRoute> routesAfter;
+        {
+            ScopedAStatus status = module->getAudioRoutes(&routesAfter);
+            ASSERT_EQ(EX_NONE, status.getExceptionCode()) << status;
+        }
+        ASSERT_EQ(routesBefore.size(), routesAfter.size())
+                << "Sizes of audio route arrays do not match after creating and "
+                << "releasing a connected port";
+        std::sort(routesBefore.begin(), routesBefore.end());
+        std::sort(routesAfter.begin(), routesAfter.end());
+        EXPECT_EQ(routesBefore, routesAfter);
+    }
+}
+
+template <typename Stream>
+class AudioStream : public AudioCoreModule {
+  public:
+    static std::string direction(bool capitalize);
+
+    void SetUp() override {
+        ASSERT_NO_FATAL_FAILURE(AudioCoreModule::SetUp());
+        ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    }
+
+    void CloseTwice() {
+        const auto portConfig = moduleConfig->getSingleConfigForMixPort(IsInput<Stream>());
+        if (!portConfig.has_value()) {
+            GTEST_SKIP() << "No mix port for attached devices";
+        }
+        std::shared_ptr<Stream> heldStream;
+        {
+            WithStream<Stream> stream(portConfig.value());
+            ASSERT_NO_FATAL_FAILURE(stream.SetUp(module.get()));
+            heldStream = stream.getSharedPointer();
+        }
+        ScopedAStatus status = heldStream->close();
+        EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                << status << " when closing the stream twice";
+    }
+
+    void OpenAllConfigs() {
+        const auto allPortConfigs = moduleConfig->getPortConfigsForMixPorts(IsInput<Stream>());
+        for (const auto& portConfig : allPortConfigs) {
+            WithStream<Stream> stream(portConfig);
+            ASSERT_NO_FATAL_FAILURE(stream.SetUp(module.get()));
+        }
+    }
+
+    void OpenOverMaxCount() {
+        constexpr bool isInput = IsInput<Stream>();
+        auto ports = moduleConfig->getMixPorts(isInput);
+        bool hasSingleRun = false;
+        for (const auto& port : ports) {
+            const size_t maxStreamCount = port.ext.get<AudioPortExt::Tag::mix>().maxOpenStreamCount;
+            if (maxStreamCount == 0 ||
+                moduleConfig->getAttachedDevicesPortsForMixPort(isInput, port).empty()) {
+                // No restrictions or no permanently attached devices.
+                continue;
+            }
+            auto portConfigs = moduleConfig->getPortConfigsForMixPorts(isInput, port);
+            if (portConfigs.size() < maxStreamCount + 1) {
+                // Not able to open a sufficient number of streams for this port.
+                continue;
+            }
+            hasSingleRun = true;
+            std::optional<WithStream<Stream>> streamWraps[maxStreamCount + 1];
+            for (size_t i = 0; i <= maxStreamCount; ++i) {
+                streamWraps[i].emplace(portConfigs[i]);
+                WithStream<Stream>& stream = streamWraps[i].value();
+                if (i < maxStreamCount) {
+                    ASSERT_NO_FATAL_FAILURE(stream.SetUp(module.get()));
+                } else {
+                    ASSERT_NO_FATAL_FAILURE(stream.SetUpPortConfig(module.get()));
+                    ScopedAStatus status = stream.SetUpNoChecks(module.get());
+                    EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                            << status << " open" << direction(true)
+                            << "Stream returned for port config ID " << stream.getPortId()
+                            << ", maxOpenStreamCount is " << maxStreamCount;
+                }
+            }
+        }
+        if (!hasSingleRun) {
+            GTEST_SKIP() << "Not enough " << direction(false)
+                         << " ports to test max open stream count";
+        }
+    }
+
+    void OpenInvalidDirection() {
+        // Important! The direction of the port config must be reversed.
+        const auto portConfig = moduleConfig->getSingleConfigForMixPort(!IsInput<Stream>());
+        if (!portConfig.has_value()) {
+            GTEST_SKIP() << "No mix port for attached devices";
+        }
+        WithStream<Stream> stream(portConfig.value());
+        ASSERT_NO_FATAL_FAILURE(stream.SetUpPortConfig(module.get()));
+        ScopedAStatus status = stream.SetUpNoChecks(module.get());
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " open" << direction(true) << "Stream returned for port config ID "
+                << stream.getPortId();
+        EXPECT_EQ(nullptr, stream.get());
+    }
+
+    void OpenTwiceSamePortConfig() {
+        const auto portConfig = moduleConfig->getSingleConfigForMixPort(IsInput<Stream>());
+        if (!portConfig.has_value()) {
+            GTEST_SKIP() << "No mix port for attached devices";
+        }
+        EXPECT_NO_FATAL_FAILURE(OpenTwiceSamePortConfigImpl(portConfig.value()));
+    }
+
+    void ResetPortConfigWithOpenStream() {
+        const auto portConfig = moduleConfig->getSingleConfigForMixPort(IsInput<Stream>());
+        if (!portConfig.has_value()) {
+            GTEST_SKIP() << "No mix port for attached devices";
+        }
+        WithStream<Stream> stream(portConfig.value());
+        ASSERT_NO_FATAL_FAILURE(stream.SetUp(module.get()));
+        ScopedAStatus status = module->resetAudioPortConfig(stream.getPortId());
+        EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                << status << " returned for port config ID " << stream.getPortId();
+    }
+
+    void OpenTwiceSamePortConfigImpl(const AudioPortConfig& portConfig) {
+        WithStream<Stream> stream1(portConfig);
+        ASSERT_NO_FATAL_FAILURE(stream1.SetUp(module.get()));
+        WithStream<Stream> stream2;
+        ScopedAStatus status = stream2.SetUpNoChecks(module.get(), stream1.getPortConfig());
+        EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                << status << " when opening " << direction(false)
+                << " stream twice for the same port config ID " << stream1.getPortId();
+    }
+};
+using AudioStreamIn = AudioStream<IStreamIn>;
+using AudioStreamOut = AudioStream<IStreamOut>;
+
+template <>
+std::string AudioStreamIn::direction(bool capitalize) {
+    return capitalize ? "Input" : "input";
+}
+template <>
+std::string AudioStreamOut::direction(bool capitalize) {
+    return capitalize ? "Output" : "output";
+}
+
+#define TEST_IO_STREAM(method_name)                                                \
+    TEST_P(AudioStreamIn, method_name) { ASSERT_NO_FATAL_FAILURE(method_name()); } \
+    TEST_P(AudioStreamOut, method_name) { ASSERT_NO_FATAL_FAILURE(method_name()); }
+
+TEST_IO_STREAM(CloseTwice);
+TEST_IO_STREAM(OpenAllConfigs);
+TEST_IO_STREAM(OpenInvalidDirection);
+TEST_IO_STREAM(OpenOverMaxCount);
+TEST_IO_STREAM(OpenTwiceSamePortConfig);
+TEST_IO_STREAM(ResetPortConfigWithOpenStream);
+
+TEST_P(AudioStreamOut, OpenTwicePrimary) {
+    const auto mixPorts = moduleConfig->getMixPorts(false);
+    auto primaryPortIt = std::find_if(mixPorts.begin(), mixPorts.end(), [](const AudioPort& port) {
+        constexpr int primaryOutputFlag = 1 << static_cast<int>(AudioOutputFlags::PRIMARY);
+        return port.flags.getTag() == AudioIoFlags::Tag::output &&
+               (port.flags.get<AudioIoFlags::Tag::output>() & primaryOutputFlag) != 0;
+    });
+    if (primaryPortIt == mixPorts.end()) {
+        GTEST_SKIP() << "No primary mix port";
+    }
+    if (moduleConfig->getAttachedSinkDevicesPortsForMixPort(*primaryPortIt).empty()) {
+        GTEST_SKIP() << "Primary mix port can not be routed to any of attached devices";
+    }
+    const auto portConfig = moduleConfig->getSingleConfigForMixPort(false, *primaryPortIt);
+    ASSERT_TRUE(portConfig.has_value()) << "No profiles specified for the primary mix port";
+    EXPECT_NO_FATAL_FAILURE(OpenTwiceSamePortConfigImpl(portConfig.value()));
+}
+
+TEST_P(AudioStreamOut, RequireOffloadInfo) {
+    const auto mixPorts = moduleConfig->getMixPorts(false);
+    auto offloadPortIt = std::find_if(mixPorts.begin(), mixPorts.end(), [&](const AudioPort& port) {
+        constexpr int compressOffloadFlag = 1
+                                            << static_cast<int>(AudioOutputFlags::COMPRESS_OFFLOAD);
+        return port.flags.getTag() == AudioIoFlags::Tag::output &&
+               (port.flags.get<AudioIoFlags::Tag::output>() & compressOffloadFlag) != 0 &&
+               !moduleConfig->getAttachedSinkDevicesPortsForMixPort(port).empty();
+    });
+    if (offloadPortIt == mixPorts.end()) {
+        GTEST_SKIP()
+                << "No mix port for compressed offload that could be routed to attached devices";
+    }
+    const auto portConfig = moduleConfig->getSingleConfigForMixPort(false, *offloadPortIt);
+    ASSERT_TRUE(portConfig.has_value())
+            << "No profiles specified for the compressed offload mix port";
+    std::shared_ptr<IStreamOut> ignored;
+    ScopedAStatus status = module->openOutputStream(portConfig.value().id,
+                                                    GenerateSourceMetadata(portConfig.value()),
+                                                    {} /* offloadInfo */, &ignored);
+    EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+            << status
+            << " returned when no offload info is provided for a compressed offload mix port";
+}
+
+// Tests specific to audio patches. The fixure class is named 'AudioModulePatch'
+// to avoid clashing with 'AudioPatch' class.
+class AudioModulePatch : public AudioCoreModule {
+  public:
+    static std::string direction(bool isInput, bool capitalize) {
+        return isInput ? (capitalize ? "Input" : "input") : (capitalize ? "Output" : "output");
+    }
+
+    void SetUp() override {
+        ASSERT_NO_FATAL_FAILURE(AudioCoreModule::SetUp());
+        ASSERT_NO_FATAL_FAILURE(SetUpModuleConfig());
+    }
+
+    void SetInvalidPatchHelper(int32_t expectedException, const std::vector<int32_t>& sources,
+                               const std::vector<int32_t>& sinks) {
+        AudioPatch patch;
+        patch.sourcePortConfigIds = sources;
+        patch.sinkPortConfigIds = sinks;
+        ScopedAStatus status = module->setAudioPatch(patch, &patch);
+        ASSERT_EQ(expectedException, status.getExceptionCode())
+                << status << ": patch source ids: " << android::internal::ToString(sources)
+                << "; sink ids: " << android::internal::ToString(sinks);
+    }
+
+    void ResetPortConfigUsedByPatch(bool isInput) {
+        auto srcSinkGroups = moduleConfig->getRoutableSrcSinkGroups(isInput);
+        if (srcSinkGroups.empty()) {
+            GTEST_SKIP() << "No routes to any attached " << direction(isInput, false) << " devices";
+        }
+        auto srcSinkGroup = *srcSinkGroups.begin();
+        auto srcSink = *srcSinkGroup.second.begin();
+        WithAudioPatch patch(srcSink.first, srcSink.second);
+        ASSERT_NO_FATAL_FAILURE(patch.SetUp(module.get()));
+        std::vector<int32_t> sourceAndSinkPortConfigIds(patch.get().sourcePortConfigIds);
+        sourceAndSinkPortConfigIds.insert(sourceAndSinkPortConfigIds.end(),
+                                          patch.get().sinkPortConfigIds.begin(),
+                                          patch.get().sinkPortConfigIds.end());
+        for (const auto portConfigId : sourceAndSinkPortConfigIds) {
+            ScopedAStatus status = module->resetAudioPortConfig(portConfigId);
+            EXPECT_EQ(EX_ILLEGAL_STATE, status.getExceptionCode())
+                    << status << " returned for port config ID " << portConfigId;
+        }
+    }
+
+    void SetInvalidPatch(bool isInput) {
+        auto srcSinkPair = moduleConfig->getRoutableSrcSinkPair(isInput);
+        if (!srcSinkPair.has_value()) {
+            GTEST_SKIP() << "No routes to any attached " << direction(isInput, false) << " devices";
+        }
+        WithAudioPortConfig srcPortConfig(srcSinkPair.value().first);
+        ASSERT_NO_FATAL_FAILURE(srcPortConfig.SetUp(module.get()));
+        WithAudioPortConfig sinkPortConfig(srcSinkPair.value().second);
+        ASSERT_NO_FATAL_FAILURE(sinkPortConfig.SetUp(module.get()));
+        {  // Check that the pair can actually be used for setting up a patch.
+            WithAudioPatch patch(srcPortConfig.get(), sinkPortConfig.get());
+            ASSERT_NO_FATAL_FAILURE(patch.SetUp(module.get()));
+        }
+        EXPECT_NO_FATAL_FAILURE(
+                SetInvalidPatchHelper(EX_ILLEGAL_ARGUMENT, {}, {sinkPortConfig.getId()}));
+        EXPECT_NO_FATAL_FAILURE(SetInvalidPatchHelper(
+                EX_ILLEGAL_ARGUMENT, {srcPortConfig.getId(), srcPortConfig.getId()},
+                {sinkPortConfig.getId()}));
+        EXPECT_NO_FATAL_FAILURE(
+                SetInvalidPatchHelper(EX_ILLEGAL_ARGUMENT, {srcPortConfig.getId()}, {}));
+        EXPECT_NO_FATAL_FAILURE(
+                SetInvalidPatchHelper(EX_ILLEGAL_ARGUMENT, {srcPortConfig.getId()},
+                                      {sinkPortConfig.getId(), sinkPortConfig.getId()}));
+
+        std::set<int32_t> portConfigIds;
+        ASSERT_NO_FATAL_FAILURE(GetAllPortConfigIds(&portConfigIds));
+        for (const auto portConfigId : GetNonExistentIds(portConfigIds)) {
+            EXPECT_NO_FATAL_FAILURE(SetInvalidPatchHelper(EX_ILLEGAL_ARGUMENT, {portConfigId},
+                                                          {sinkPortConfig.getId()}));
+            EXPECT_NO_FATAL_FAILURE(SetInvalidPatchHelper(EX_ILLEGAL_ARGUMENT,
+                                                          {srcPortConfig.getId()}, {portConfigId}));
+        }
+    }
+
+    void SetNonRoutablePatch(bool isInput) {
+        auto srcSinkPair = moduleConfig->getNonRoutableSrcSinkPair(isInput);
+        if (!srcSinkPair.has_value()) {
+            GTEST_SKIP() << "All possible source/sink pairs are routable";
+        }
+        WithAudioPatch patch(srcSinkPair.value().first, srcSinkPair.value().second);
+        ASSERT_NO_FATAL_FAILURE(patch.SetUpPortConfigs(module.get()));
+        ScopedAStatus status = patch.SetUpNoChecks(module.get());
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << ": when setting up a patch from "
+                << srcSinkPair.value().first.toString() << " to "
+                << srcSinkPair.value().second.toString() << " that does not have a route";
+    }
+
+    void SetPatch(bool isInput) {
+        auto srcSinkGroups = moduleConfig->getRoutableSrcSinkGroups(isInput);
+        if (srcSinkGroups.empty()) {
+            GTEST_SKIP() << "No routes to any attached " << direction(isInput, false) << " devices";
+        }
+        for (const auto& srcSinkGroup : srcSinkGroups) {
+            const auto& route = srcSinkGroup.first;
+            std::vector<std::unique_ptr<WithAudioPatch>> patches;
+            for (const auto& srcSink : srcSinkGroup.second) {
+                if (!route.isExclusive) {
+                    patches.push_back(
+                            std::make_unique<WithAudioPatch>(srcSink.first, srcSink.second));
+                    EXPECT_NO_FATAL_FAILURE(patches[patches.size() - 1]->SetUp(module.get()));
+                } else {
+                    WithAudioPatch patch(srcSink.first, srcSink.second);
+                    EXPECT_NO_FATAL_FAILURE(patch.SetUp(module.get()));
+                }
+            }
+        }
+    }
+
+    void UpdatePatch(bool isInput) {
+        auto srcSinkGroups = moduleConfig->getRoutableSrcSinkGroups(isInput);
+        if (srcSinkGroups.empty()) {
+            GTEST_SKIP() << "No routes to any attached " << direction(isInput, false) << " devices";
+        }
+        for (const auto& srcSinkGroup : srcSinkGroups) {
+            for (const auto& srcSink : srcSinkGroup.second) {
+                WithAudioPatch patch(srcSink.first, srcSink.second);
+                ASSERT_NO_FATAL_FAILURE(patch.SetUp(module.get()));
+                AudioPatch ignored;
+                EXPECT_NO_FATAL_FAILURE(module->setAudioPatch(patch.get(), &ignored));
+            }
+        }
+    }
+
+    void UpdateInvalidPatchId(bool isInput) {
+        auto srcSinkGroups = moduleConfig->getRoutableSrcSinkGroups(isInput);
+        if (srcSinkGroups.empty()) {
+            GTEST_SKIP() << "No routes to any attached " << direction(isInput, false) << " devices";
+        }
+        // First, set up a patch to ensure that its settings are accepted.
+        auto srcSinkGroup = *srcSinkGroups.begin();
+        auto srcSink = *srcSinkGroup.second.begin();
+        WithAudioPatch patch(srcSink.first, srcSink.second);
+        ASSERT_NO_FATAL_FAILURE(patch.SetUp(module.get()));
+        // Then use the same patch setting, except for having an invalid ID.
+        std::set<int32_t> patchIds;
+        ASSERT_NO_FATAL_FAILURE(GetAllPatchIds(&patchIds));
+        for (const auto patchId : GetNonExistentIds(patchIds)) {
+            AudioPatch patchWithNonExistendId = patch.get();
+            patchWithNonExistendId.id = patchId;
+            ScopedAStatus status =
+                    module->setAudioPatch(patchWithNonExistendId, &patchWithNonExistendId);
+            EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                    << status << " returned for patch ID " << patchId;
+        }
+    }
+};
+
+// Not all tests require both directions, so parametrization would require
+// more abstractions.
+#define TEST_PATCH_BOTH_DIRECTIONS(method_name)                                                  \
+    TEST_P(AudioModulePatch, method_name##Input) { ASSERT_NO_FATAL_FAILURE(method_name(true)); } \
+    TEST_P(AudioModulePatch, method_name##Output) { ASSERT_NO_FATAL_FAILURE(method_name(false)); }
+
+TEST_PATCH_BOTH_DIRECTIONS(ResetPortConfigUsedByPatch);
+TEST_PATCH_BOTH_DIRECTIONS(SetInvalidPatch);
+TEST_PATCH_BOTH_DIRECTIONS(SetNonRoutablePatch);
+TEST_PATCH_BOTH_DIRECTIONS(SetPatch);
+TEST_PATCH_BOTH_DIRECTIONS(UpdateInvalidPatchId);
+TEST_PATCH_BOTH_DIRECTIONS(UpdatePatch);
+
+TEST_P(AudioModulePatch, ResetInvalidPatchId) {
+    std::set<int32_t> patchIds;
+    ASSERT_NO_FATAL_FAILURE(GetAllPatchIds(&patchIds));
+    for (const auto patchId : GetNonExistentIds(patchIds)) {
+        ScopedAStatus status = module->resetAudioPatch(patchId);
+        EXPECT_EQ(EX_ILLEGAL_ARGUMENT, status.getExceptionCode())
+                << status << " returned for patch ID " << patchId;
+    }
+}
+
+INSTANTIATE_TEST_SUITE_P(AudioCoreModuleTest, AudioCoreModule,
+                         testing::ValuesIn(android::getAidlHalInstanceNames(IModule::descriptor)),
+                         android::PrintInstanceNameToString);
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(AudioCoreModule);
+INSTANTIATE_TEST_SUITE_P(AudioStreamInTest, AudioStreamIn,
+                         testing::ValuesIn(android::getAidlHalInstanceNames(IModule::descriptor)),
+                         android::PrintInstanceNameToString);
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(AudioStreamIn);
+INSTANTIATE_TEST_SUITE_P(AudioStreamOutTest, AudioStreamOut,
+                         testing::ValuesIn(android::getAidlHalInstanceNames(IModule::descriptor)),
+                         android::PrintInstanceNameToString);
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(AudioStreamOut);
+INSTANTIATE_TEST_SUITE_P(AudioPatchTest, AudioModulePatch,
+                         testing::ValuesIn(android::getAidlHalInstanceNames(IModule::descriptor)),
+                         android::PrintInstanceNameToString);
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(AudioModulePatch);
+
+class TestExecutionTracer : public ::testing::EmptyTestEventListener {
+  public:
+    void OnTestStart(const ::testing::TestInfo& test_info) override {
+        TraceTestState("Started", test_info);
+    }
+
+    void OnTestEnd(const ::testing::TestInfo& test_info) override {
+        TraceTestState("Completed", test_info);
+    }
+
+  private:
+    static void TraceTestState(const std::string& state, const ::testing::TestInfo& test_info) {
+        LOG(INFO) << state << " " << test_info.test_suite_name() << "::" << test_info.name();
+    }
+};
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    ::testing::UnitTest::GetInstance()->listeners().Append(new TestExecutionTracer());
+    ABinderProcess_setThreadPoolMaxThreadCount(1);
+    ABinderProcess_startThreadPool();
+    return RUN_ALL_TESTS();
+}
diff --git a/audio/common/all-versions/default/tests/hidlutils_tests.cpp b/audio/common/all-versions/default/tests/hidlutils_tests.cpp
index e6e2280..c295aaa 100644
--- a/audio/common/all-versions/default/tests/hidlutils_tests.cpp
+++ b/audio/common/all-versions/default/tests/hidlutils_tests.cpp
@@ -17,6 +17,7 @@
 #include <array>
 #include <string>
 
+#include <android-base/test_utils.h>
 #include <gtest/gtest.h>
 
 #define LOG_TAG "HidlUtils_Test"
@@ -1124,6 +1125,7 @@
 TYPED_TEST_SUITE(FilterTest, FilterTestTypeParams);
 
 TYPED_TEST(FilterTest, FilterOutNonVendorTags) {
+    SKIP_WITH_HWASAN; // b/230535046
     TypeParam emptyTags;
     EXPECT_EQ(emptyTags, HidlUtils::filterOutNonVendorTags(emptyTags));
 
diff --git a/audio/common/all-versions/test/utility/src/ValidateXml.cpp b/audio/common/all-versions/test/utility/src/ValidateXml.cpp
index f111c01..4d6f003 100644
--- a/audio/common/all-versions/test/utility/src/ValidateXml.cpp
+++ b/audio/common/all-versions/test/utility/src/ValidateXml.cpp
@@ -63,11 +63,8 @@
         xmlSetGenericErrorFunc(this, errorCb);
     }
     ~Libxml2Global() {
-        // TODO: check if all those cleanup are needed
         xmlSetGenericErrorFunc(nullptr, nullptr);
-        xmlSchemaCleanupTypes();
         xmlCleanupParser();
-        xmlCleanupThreads();
     }
 
     const std::string& getErrors() { return errors; }
diff --git a/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp b/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
index dfc2386..4b76a0b 100644
--- a/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
+++ b/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
@@ -14,7 +14,11 @@
  * limitations under the License.
  */
 
+#include <fstream>
+#include <numeric>
+
 #include <android-base/chrono_utils.h>
+#include <cutils/properties.h>
 
 #include "Generators.h"
 
@@ -517,20 +521,10 @@
     }
 
     bool canQueryPresentationPosition() const {
-        auto maybeSinkAddress =
-                getCachedPolicyConfig().getSinkDeviceForMixPort(getDeviceName(), getMixPortName());
-        // Returning 'true' when no sink is found so the test can fail later with a more clear
-        // problem description.
-        return !maybeSinkAddress.has_value() ||
-               !xsd::isTelephonyDevice(maybeSinkAddress.value().deviceType);
+        return !xsd::isTelephonyDevice(address.deviceType);
     }
 
     void createPatchIfNeeded() {
-        auto maybeSinkAddress =
-                getCachedPolicyConfig().getSinkDeviceForMixPort(getDeviceName(), getMixPortName());
-        ASSERT_TRUE(maybeSinkAddress.has_value())
-                << "No sink device found for mix port " << getMixPortName() << " (module "
-                << getDeviceName() << ")";
         if (areAudioPatchesSupported()) {
             AudioPortConfig source;
             source.base.format.value(getConfig().base.format);
@@ -540,13 +534,13 @@
             source.ext.mix().ioHandle = helper.getIoHandle();
             source.ext.mix().useCase.stream({});
             AudioPortConfig sink;
-            sink.ext.device(maybeSinkAddress.value());
+            sink.ext.device(address);
             EXPECT_OK(getDevice()->createAudioPatch(hidl_vec<AudioPortConfig>{source},
                                                     hidl_vec<AudioPortConfig>{sink},
                                                     returnIn(res, mPatchHandle)));
             mHasPatch = res == Result::OK;
         } else {
-            EXPECT_OK(stream->setDevices({maybeSinkAddress.value()}));
+            EXPECT_OK(stream->setDevices({address}));
         }
     }
 
@@ -556,10 +550,6 @@
                 EXPECT_OK(getDevice()->releaseAudioPatch(mPatchHandle));
                 mHasPatch = false;
             }
-        } else {
-            if (stream) {
-                EXPECT_OK(stream->setDevices({address}));
-            }
         }
     }
 
@@ -575,16 +565,22 @@
         // Sometimes HAL doesn't have enough information until the audio data actually gets
         // consumed by the hardware.
         bool timedOut = false;
-        res = Result::INVALID_STATE;
-        for (android::base::Timer elapsed;
-             res != Result::OK && !writer.hasError() &&
-             !(timedOut = (elapsed.duration() >= kPositionChangeTimeout));) {
-            usleep(kWriteDurationUs);
-            ASSERT_OK(stream->getPresentationPosition(returnIn(res, framesInitial, ts)));
-            ASSERT_RESULT(okOrInvalidState, res);
+        if (!firstPosition || *firstPosition == std::numeric_limits<uint64_t>::max()) {
+            res = Result::INVALID_STATE;
+            for (android::base::Timer elapsed;
+                 res != Result::OK && !writer.hasError() &&
+                 !(timedOut = (elapsed.duration() >= kPositionChangeTimeout));) {
+                usleep(kWriteDurationUs);
+                ASSERT_OK(stream->getPresentationPosition(returnIn(res, framesInitial, ts)));
+                ASSERT_RESULT(okOrInvalidState, res);
+            }
+            ASSERT_FALSE(writer.hasError());
+            ASSERT_FALSE(timedOut);
+        } else {
+            // Use `firstPosition` instead of querying it from the HAL. This is used when
+            // `waitForPresentationPositionAdvance` is called in a loop.
+            framesInitial = *firstPosition;
         }
-        ASSERT_FALSE(writer.hasError());
-        ASSERT_FALSE(timedOut);
 
         uint64_t frames = framesInitial;
         for (android::base::Timer elapsed;
@@ -646,7 +642,7 @@
     ASSERT_OK(stream->standby());
     writer.resume();
 
-    uint64_t frames;
+    uint64_t frames = std::numeric_limits<uint64_t>::max();
     ASSERT_NO_FATAL_FAILURE(waitForPresentationPositionAdvance(writer, &frames));
     EXPECT_GT(frames, framesInitial);
 
@@ -691,24 +687,12 @@
         InputStreamTest::TearDown();
     }
 
-    bool canQueryCapturePosition() const {
-        auto maybeSourceAddress = getCachedPolicyConfig().getSourceDeviceForMixPort(
-                getDeviceName(), getMixPortName());
-        // Returning 'true' when no source is found so the test can fail later with a more clear
-        // problem description.
-        return !maybeSourceAddress.has_value() ||
-               !xsd::isTelephonyDevice(maybeSourceAddress.value().deviceType);
-    }
+    bool canQueryCapturePosition() const { return !xsd::isTelephonyDevice(address.deviceType); }
 
     void createPatchIfNeeded() {
-        auto maybeSourceAddress = getCachedPolicyConfig().getSourceDeviceForMixPort(
-                getDeviceName(), getMixPortName());
-        ASSERT_TRUE(maybeSourceAddress.has_value())
-                << "No source device found for mix port " << getMixPortName() << " (module "
-                << getDeviceName() << ")";
         if (areAudioPatchesSupported()) {
             AudioPortConfig source;
-            source.ext.device(maybeSourceAddress.value());
+            source.ext.device(address);
             AudioPortConfig sink;
             sink.base.format.value(getConfig().base.format);
             sink.base.sampleRateHz.value(getConfig().base.sampleRateHz);
@@ -721,20 +705,14 @@
                                                     returnIn(res, mPatchHandle)));
             mHasPatch = res == Result::OK;
         } else {
-            EXPECT_OK(stream->setDevices({maybeSourceAddress.value()}));
+            EXPECT_OK(stream->setDevices({address}));
         }
     }
 
     void releasePatchIfNeeded() {
-        if (getDevice()) {
-            if (areAudioPatchesSupported() && mHasPatch) {
-                EXPECT_OK(getDevice()->releaseAudioPatch(mPatchHandle));
-                mHasPatch = false;
-            }
-        } else {
-            if (stream) {
-                EXPECT_OK(stream->setDevices({address}));
-            }
+        if (getDevice() && areAudioPatchesSupported() && mHasPatch) {
+            EXPECT_OK(getDevice()->releaseAudioPatch(mPatchHandle));
+            mHasPatch = false;
         }
     }
 
@@ -864,14 +842,8 @@
     }
     ASSERT_OK(res);
 
-    auto maybeSourceAddress =
-            getCachedPolicyConfig().getSourceDeviceForMixPort(getDeviceName(), getMixPortName());
-    ASSERT_TRUE(maybeSourceAddress.has_value())
-            << "No source device found for mix port " << getMixPortName() << " (module "
-            << getDeviceName() << ")";
-
     for (auto microphone : microphones) {
-        if (microphone.deviceAddress == maybeSourceAddress.value()) {
+        if (microphone.deviceAddress == address) {
             StreamReader reader(stream.get(), stream->getBufferSize());
             ASSERT_TRUE(reader.start());
             reader.pause();  // This ensures that at least one read has happened.
@@ -889,3 +861,176 @@
                         ::testing::ValuesIn(getBuiltinMicConfigParameters()),
                         &DeviceConfigParameterToString);
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(MicrophoneInfoInputStreamTest);
+
+static const std::vector<DeviceConfigParameter>& getOutputDeviceCompressedConfigParameters(
+        const AudioConfigBase& configToMatch) {
+    static const std::vector<DeviceConfigParameter> parameters = [&] {
+        auto allParams = getOutputDeviceConfigParameters();
+        std::vector<DeviceConfigParameter> compressedParams;
+        std::copy_if(allParams.begin(), allParams.end(), std::back_inserter(compressedParams),
+                     [&](auto cfg) {
+                         if (std::get<PARAM_CONFIG>(cfg).base != configToMatch) return false;
+                         const auto& flags = std::get<PARAM_FLAGS>(cfg);
+                         return std::find_if(flags.begin(), flags.end(), [](const auto& flag) {
+                                    return flag ==
+                                           toString(xsd::AudioInOutFlag::
+                                                            AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD);
+                                }) != flags.end();
+                     });
+        return compressedParams;
+    }();
+    return parameters;
+}
+
+class CompressedOffloadOutputStreamTest : public PcmOnlyConfigOutputStreamTest {
+  public:
+    void loadData(const std::string& fileName, std::vector<uint8_t>* data) {
+        std::ifstream is(fileName, std::ios::in | std::ios::binary);
+        ASSERT_TRUE(is.good()) << "Failed to open file " << fileName;
+        is.seekg(0, is.end);
+        data->reserve(data->size() + is.tellg());
+        is.seekg(0, is.beg);
+        data->insert(data->end(), std::istreambuf_iterator<char>(is),
+                     std::istreambuf_iterator<char>());
+        ASSERT_TRUE(!is.fail()) << "Failed to read from file " << fileName;
+    }
+};
+
+class OffloadCallbacks : public IStreamOutCallback {
+  public:
+    Return<void> onDrainReady() override {
+        ALOGI("onDrainReady");
+        {
+            std::lock_guard lg(mLock);
+            mOnDrainReady = true;
+        }
+        mCondVar.notify_one();
+        return {};
+    }
+    Return<void> onWriteReady() override { return {}; }
+    Return<void> onError() override {
+        ALOGW("onError");
+        {
+            std::lock_guard lg(mLock);
+            mOnError = true;
+        }
+        mCondVar.notify_one();
+        return {};
+    }
+    bool waitForDrainReadyOrError() {
+        std::unique_lock l(mLock);
+        if (!mOnDrainReady && !mOnError) {
+            mCondVar.wait(l, [&]() { return mOnDrainReady || mOnError; });
+        }
+        const bool success = !mOnError;
+        mOnDrainReady = mOnError = false;
+        return success;
+    }
+
+  private:
+    std::mutex mLock;
+    bool mOnDrainReady = false;
+    bool mOnError = false;
+    std::condition_variable mCondVar;
+};
+
+TEST_P(CompressedOffloadOutputStreamTest, Mp3FormatGaplessOffload) {
+    doc::test("Check that compressed offload mix ports for MP3 implement gapless offload");
+    const auto& flags = getOutputFlags();
+    const bool isNewDeviceLaunchingOnTPlus = property_get_int32("ro.vendor.api_level", 0) >= 33;
+    // See test instantiation, only offload MP3 mix ports are used.
+    if (std::find_if(flags.begin(), flags.end(), [](const auto& flag) {
+            return flag == toString(xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_GAPLESS_OFFLOAD);
+        }) == flags.end()) {
+        if (isNewDeviceLaunchingOnTPlus) {
+            FAIL() << "New devices launching on Android T+ must support gapless offload, "
+                   << "see VSR-4.3-001";
+        } else {
+            GTEST_SKIP() << "Compressed offload mix port does not support gapless offload";
+        }
+    }
+    std::vector<uint8_t> offloadData;
+    ASSERT_NO_FATAL_FAILURE(loadData("/data/local/tmp/sine882hz3s.mp3", &offloadData));
+    ASSERT_FALSE(offloadData.empty());
+    ASSERT_NO_FATAL_FAILURE(createPatchIfNeeded());
+    const int presentationeEndPrecisionMs = 1000;
+    const int sampleRate = 44100;
+    const int significantSampleNumber = (presentationeEndPrecisionMs * sampleRate) / 1000;
+    const int delay = 576 + 1000;
+    const int padding = 756 + 1000;
+    const int durationMs = 3000 - 44;
+    auto start = std::chrono::steady_clock::now();
+    auto callbacks = sp<OffloadCallbacks>::make();
+    std::mutex presentationEndLock;
+    std::vector<float> presentationEndTimes;
+    // StreamWriter plays 'offloadData' in a loop, possibly using multiple calls to 'write', this
+    // depends on the relative sizes of 'offloadData' and the HAL buffer. Writer calls 'onDataStart'
+    // each time it starts writing the buffer from the beginning, and 'onDataWrap' callback each
+    // time it wraps around the buffer.
+    StreamWriter writer(
+            stream.get(), stream->getBufferSize(), std::move(offloadData),
+            [&]() /* onDataStart */ { start = std::chrono::steady_clock::now(); },
+            [&]() /* onDataWrap */ {
+                Return<Result> ret(Result::OK);
+                // Decrease the volume since the test plays a loud sine wave.
+                ret = stream->setVolume(0.1, 0.1);
+                if (!ret.isOk() || ret != Result::OK) {
+                    ALOGE("%s: setVolume failed: %s", __func__, toString(ret).c_str());
+                    return false;
+                }
+                ret = Parameters::set(
+                        stream, {{AUDIO_OFFLOAD_CODEC_DELAY_SAMPLES, std::to_string(delay)},
+                                 {AUDIO_OFFLOAD_CODEC_PADDING_SAMPLES, std::to_string(padding)}});
+                if (!ret.isOk() || ret != Result::OK) {
+                    ALOGE("%s: setParameters failed: %s", __func__, toString(ret).c_str());
+                    return false;
+                }
+                ret = stream->drain(AudioDrain::EARLY_NOTIFY);
+                if (!ret.isOk() || ret != Result::OK) {
+                    ALOGE("%s: drain failed: %s", __func__, toString(ret).c_str());
+                    return false;
+                }
+                // FIXME: On some SoCs intermittent errors are possible, ignore them.
+                if (callbacks->waitForDrainReadyOrError()) {
+                    const float duration = std::chrono::duration_cast<std::chrono::milliseconds>(
+                                                   std::chrono::steady_clock::now() - start)
+                                                   .count();
+                    std::lock_guard lg(presentationEndLock);
+                    presentationEndTimes.push_back(duration);
+                }
+                return true;
+            });
+    ASSERT_OK(stream->setCallback(callbacks));
+    ASSERT_TRUE(writer.start());
+    // How many times to loop the track so that the sum of gapless delay and padding from
+    // the first presentation end to the last is at least 'presentationeEndPrecisionMs'.
+    const int playbackNumber = (int)(significantSampleNumber / ((float)delay + padding) + 1);
+    for (bool done = false; !done;) {
+        usleep(presentationeEndPrecisionMs * 1000);
+        {
+            std::lock_guard lg(presentationEndLock);
+            done = presentationEndTimes.size() >= playbackNumber;
+        }
+        ASSERT_FALSE(writer.hasError()) << "Recent write or drain operation has failed";
+    }
+    const float avgDuration =
+            std::accumulate(presentationEndTimes.begin(), presentationEndTimes.end(), 0.0) /
+            presentationEndTimes.size();
+    std::stringstream observedEndTimes;
+    std::copy(presentationEndTimes.begin(), presentationEndTimes.end(),
+              std::ostream_iterator<float>(observedEndTimes, ", "));
+    EXPECT_NEAR(durationMs, avgDuration, presentationeEndPrecisionMs * 0.1)
+            << "Observed durations: " << observedEndTimes.str();
+    writer.stop();
+    EXPECT_OK(stream->clearCallback());
+    releasePatchIfNeeded();
+}
+
+INSTANTIATE_TEST_CASE_P(
+        CompressedOffloadOutputStream, CompressedOffloadOutputStreamTest,
+        ::testing::ValuesIn(getOutputDeviceCompressedConfigParameters(AudioConfigBase{
+                .format = xsd::toString(xsd::AudioFormat::AUDIO_FORMAT_MP3),
+                .sampleRateHz = 44100,
+                .channelMask = xsd::toString(xsd::AudioChannelMask::AUDIO_CHANNEL_OUT_STEREO)})),
+        &DeviceConfigParameterToString);
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(CompressedOffloadOutputStreamTest);
diff --git a/audio/core/all-versions/vts/functional/7.0/Generators.cpp b/audio/core/all-versions/vts/functional/7.0/Generators.cpp
index f936d0a..8b955b6 100644
--- a/audio/core/all-versions/vts/functional/7.0/Generators.cpp
+++ b/audio/core/all-versions/vts/functional/7.0/Generators.cpp
@@ -57,9 +57,6 @@
 
 static std::tuple<std::vector<AudioInOutFlag>, bool> generateOutFlags(
         const xsd::MixPorts::MixPort& mixPort) {
-    static const std::vector<AudioInOutFlag> offloadFlags = {
-            toString(xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD),
-            toString(xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_DIRECT)};
     std::vector<AudioInOutFlag> flags;
     bool isOffload = false;
     if (mixPort.hasFlags()) {
@@ -67,14 +64,10 @@
         isOffload = std::find(xsdFlags.begin(), xsdFlags.end(),
                               xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) !=
                     xsdFlags.end();
-        if (!isOffload) {
-            for (auto flag : xsdFlags) {
-                if (flag != xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_PRIMARY) {
-                    flags.push_back(toString(flag));
-                }
+        for (auto flag : xsdFlags) {
+            if (flag != xsd::AudioInOutFlag::AUDIO_OUTPUT_FLAG_PRIMARY) {
+                flags.push_back(toString(flag));
             }
-        } else {
-            flags = offloadFlags;
         }
     }
     return {flags, isOffload};
@@ -85,10 +78,10 @@
             .base = base,
             .streamType = toString(xsd::AudioStreamType::AUDIO_STREAM_MUSIC),
             .usage = toString(xsd::AudioUsage::AUDIO_USAGE_MEDIA),
-            .bitRatePerSecond = 320,
+            .bitRatePerSecond = 192,  // as in sine882hz3s.mp3
             .durationMicroseconds = -1,
             .bitWidth = 16,
-            .bufferSize = 256  // arbitrary value
+            .bufferSize = 72000  // 3 seconds at 192 kbps, as in sine882hz3s.mp3
     };
 }
 
@@ -100,11 +93,10 @@
         if (!module || !module->getFirstMixPorts()) break;
         for (const auto& mixPort : module->getFirstMixPorts()->getMixPort()) {
             if (mixPort.getRole() != xsd::Role::source) continue;  // not an output profile
-            if (getCachedPolicyConfig()
-                        .getAttachedSinkDeviceForMixPort(moduleName, mixPort.getName())
-                        .empty()) {
-                continue;  // no attached device
-            }
+            const auto attachedDeviceAddress =
+                    getCachedPolicyConfig().getDeviceAddressOfSinkDeviceAttachedToMixPort(
+                            moduleName, mixPort.getName());
+            if (!attachedDeviceAddress.has_value()) continue;
             auto [flags, isOffload] = generateOutFlags(mixPort);
             for (const auto& profile : mixPort.getProfile()) {
                 if (!profile.hasFormat() || !profile.hasSamplingRates() ||
@@ -118,7 +110,8 @@
                     if (isOffload) {
                         config.offloadInfo.info(generateOffloadInfo(config.base));
                     }
-                    result.emplace_back(device, mixPort.getName(), config, flags);
+                    result.emplace_back(device, mixPort.getName(), attachedDeviceAddress.value(),
+                                        config, flags);
                     if (oneProfilePerDevice) break;
                 }
                 if (oneProfilePerDevice) break;
@@ -162,13 +155,16 @@
                             profile.getFormat(),
                             static_cast<uint32_t>(profile.getSamplingRates()[0]),
                             toString(profile.getChannelMasks()[0])};
+                    DeviceAddress defaultDevice = {
+                            toString(xsd::AudioDevice::AUDIO_DEVICE_OUT_DEFAULT), {}};
                     {
                         AudioConfig config{.base = validBase};
                         config.base.channelMask = "random_string";
                         if (isOffload) {
                             config.offloadInfo.info(generateOffloadInfo(validBase));
                         }
-                        result.emplace_back(device, mixPort.getName(), config, validFlags);
+                        result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                            validFlags);
                     }
                     {
                         AudioConfig config{.base = validBase};
@@ -176,7 +172,8 @@
                         if (isOffload) {
                             config.offloadInfo.info(generateOffloadInfo(validBase));
                         }
-                        result.emplace_back(device, mixPort.getName(), config, validFlags);
+                        result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                            validFlags);
                     }
                     if (generateInvalidFlags) {
                         AudioConfig config{.base = validBase};
@@ -184,32 +181,37 @@
                             config.offloadInfo.info(generateOffloadInfo(validBase));
                         }
                         std::vector<AudioInOutFlag> flags = {"random_string", ""};
-                        result.emplace_back(device, mixPort.getName(), config, flags);
+                        result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                            flags);
                     }
                     if (isOffload) {
                         {
                             AudioConfig config{.base = validBase};
                             config.offloadInfo.info(generateOffloadInfo(validBase));
                             config.offloadInfo.info().base.channelMask = "random_string";
-                            result.emplace_back(device, mixPort.getName(), config, validFlags);
+                            result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                                validFlags);
                         }
                         {
                             AudioConfig config{.base = validBase};
                             config.offloadInfo.info(generateOffloadInfo(validBase));
                             config.offloadInfo.info().base.format = "random_string";
-                            result.emplace_back(device, mixPort.getName(), config, validFlags);
+                            result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                                validFlags);
                         }
                         {
                             AudioConfig config{.base = validBase};
                             config.offloadInfo.info(generateOffloadInfo(validBase));
                             config.offloadInfo.info().streamType = "random_string";
-                            result.emplace_back(device, mixPort.getName(), config, validFlags);
+                            result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                                validFlags);
                         }
                         {
                             AudioConfig config{.base = validBase};
                             config.offloadInfo.info(generateOffloadInfo(validBase));
                             config.offloadInfo.info().usage = "random_string";
-                            result.emplace_back(device, mixPort.getName(), config, validFlags);
+                            result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                                validFlags);
                         }
                         hasOffloadConfig = true;
                     } else {
@@ -233,11 +235,10 @@
         if (!module || !module->getFirstMixPorts()) break;
         for (const auto& mixPort : module->getFirstMixPorts()->getMixPort()) {
             if (mixPort.getRole() != xsd::Role::sink) continue;  // not an input profile
-            if (getCachedPolicyConfig()
-                        .getAttachedSourceDeviceForMixPort(moduleName, mixPort.getName())
-                        .empty()) {
-                continue;  // no attached device
-            }
+            const auto attachedDeviceAddress =
+                    getCachedPolicyConfig().getDeviceAddressOfSourceDeviceAttachedToMixPort(
+                            moduleName, mixPort.getName());
+            if (!attachedDeviceAddress.has_value()) continue;
             std::vector<AudioInOutFlag> flags;
             if (mixPort.hasFlags()) {
                 std::transform(mixPort.getFlags().begin(), mixPort.getFlags().end(),
@@ -250,7 +251,8 @@
                 auto configs = combineAudioConfig(profile.getChannelMasks(),
                                                   profile.getSamplingRates(), profile.getFormat());
                 for (const auto& config : configs) {
-                    result.emplace_back(device, mixPort.getName(), config, flags);
+                    result.emplace_back(device, mixPort.getName(), attachedDeviceAddress.value(),
+                                        config, flags);
                     if (oneProfilePerDevice) break;
                 }
                 if (oneProfilePerDevice) break;
@@ -298,20 +300,25 @@
                             profile.getFormat(),
                             static_cast<uint32_t>(profile.getSamplingRates()[0]),
                             toString(profile.getChannelMasks()[0])};
+                    DeviceAddress defaultDevice = {
+                            toString(xsd::AudioDevice::AUDIO_DEVICE_IN_DEFAULT), {}};
                     {
                         AudioConfig config{.base = validBase};
                         config.base.channelMask = "random_string";
-                        result.emplace_back(device, mixPort.getName(), config, validFlags);
+                        result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                            validFlags);
                     }
                     {
                         AudioConfig config{.base = validBase};
                         config.base.format = "random_string";
-                        result.emplace_back(device, mixPort.getName(), config, validFlags);
+                        result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                            validFlags);
                     }
                     if (generateInvalidFlags) {
                         AudioConfig config{.base = validBase};
                         std::vector<AudioInOutFlag> flags = {"random_string", ""};
-                        result.emplace_back(device, mixPort.getName(), config, flags);
+                        result.emplace_back(device, mixPort.getName(), defaultDevice, config,
+                                            flags);
                     }
                     hasConfig = true;
                     break;
diff --git a/audio/core/all-versions/vts/functional/7.0/PolicyConfig.h b/audio/core/all-versions/vts/functional/7.0/PolicyConfig.h
index 4aea503..c1d5669 100644
--- a/audio/core/all-versions/vts/functional/7.0/PolicyConfig.h
+++ b/audio/core/all-versions/vts/functional/7.0/PolicyConfig.h
@@ -61,6 +61,18 @@
     const std::set<std::string>& getModulesWithDevicesNames() const {
         return mModulesWithDevicesNames;
     }
+    std::optional<DeviceAddress> getDeviceAddressOfSinkDeviceAttachedToMixPort(
+            const std::string& moduleName, const std::string& mixPortName) const {
+        const auto attachedDevicePort = getAttachedSinkDeviceForMixPort(moduleName, mixPortName);
+        if (attachedDevicePort.empty()) return {};
+        return getDeviceAddressOfDevicePort(moduleName, attachedDevicePort);
+    }
+    std::optional<DeviceAddress> getDeviceAddressOfSourceDeviceAttachedToMixPort(
+            const std::string& moduleName, const std::string& mixPortName) const {
+        const auto attachedDevicePort = getAttachedSourceDeviceForMixPort(moduleName, mixPortName);
+        if (attachedDevicePort.empty()) return {};
+        return getDeviceAddressOfDevicePort(moduleName, attachedDevicePort);
+    }
     std::string getAttachedSinkDeviceForMixPort(const std::string& moduleName,
                                                 const std::string& mixPortName) const {
         return findAttachedDevice(getAttachedDevices(moduleName),
@@ -84,8 +96,6 @@
     const std::vector<std::string>& getAttachedDevices(const std::string& moduleName) const;
     std::optional<DeviceAddress> getDeviceAddressOfDevicePort(
             const std::string& moduleName, const std::string& devicePortName) const;
-    std::string getDevicePortTagNameFromType(const std::string& moduleName,
-                                             const AudioDevice& deviceType) const;
     std::set<std::string> getSinkDevicesForMixPort(const std::string& moduleName,
                                                    const std::string& mixPortName) const;
     std::set<std::string> getSourceDevicesForMixPort(const std::string& moduleName,
diff --git a/audio/core/all-versions/vts/functional/Android.bp b/audio/core/all-versions/vts/functional/Android.bp
index c757032..daed7a8 100644
--- a/audio/core/all-versions/vts/functional/Android.bp
+++ b/audio/core/all-versions/vts/functional/Android.bp
@@ -34,6 +34,7 @@
     ],
     shared_libs: [
         "libbinder",
+        "libcutils",
         "libfmq",
         "libxml2",
     ],
@@ -190,6 +191,7 @@
     ],
     data: [
         ":audio_policy_configuration_V7_0",
+        "data/sine882hz3s.mp3",
     ],
     // Use test_config for vts suite.
     // TODO(b/146104851): Add auto-gen rules and remove it.
@@ -223,6 +225,7 @@
     ],
     data: [
         ":audio_policy_configuration_V7_1",
+        "data/sine882hz3s.mp3",
     ],
     // Use test_config for vts suite.
     // TODO(b/146104851): Add auto-gen rules and remove it.
diff --git a/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h b/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
index 38e9e5f..e46e5b4 100644
--- a/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
+++ b/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
@@ -617,7 +617,8 @@
                     std::get<PARAM_FLAGS>(info.param)));
 #elif MAJOR_VERSION >= 7
     const auto configPart =
-            std::to_string(config.base.sampleRateHz) + "_" +
+            ::testing::PrintToString(std::get<PARAM_ATTACHED_DEV_ADDR>(info.param).deviceType) +
+            "_" + std::to_string(config.base.sampleRateHz) + "_" +
             // The channel masks and flags are vectors of strings, just need to sanitize them.
             SanitizeStringForGTestName(::testing::PrintToString(config.base.channelMask)) + "_" +
             SanitizeStringForGTestName(::testing::PrintToString(std::get<PARAM_FLAGS>(info.param)));
@@ -658,6 +659,9 @@
                 std::get<INDEX_OUTPUT>(std::get<PARAM_FLAGS>(GetParam())));
     }
 #elif MAJOR_VERSION >= 7
+    DeviceAddress getAttachedDeviceAddress() const {
+        return std::get<PARAM_ATTACHED_DEV_ADDR>(GetParam());
+    }
     hidl_vec<AudioInOutFlag> getInputFlags() const { return std::get<PARAM_FLAGS>(GetParam()); }
     hidl_vec<AudioInOutFlag> getOutputFlags() const { return std::get<PARAM_FLAGS>(GetParam()); }
 #endif
@@ -933,6 +937,15 @@
 
     StreamWriter(IStreamOut* stream, size_t bufferSize)
         : mStream(stream), mBufferSize(bufferSize), mData(mBufferSize) {}
+    StreamWriter(IStreamOut* stream, size_t bufferSize, std::vector<uint8_t>&& data,
+                 std::function<void()> onDataStart, std::function<bool()> onDataWrap)
+        : mStream(stream),
+          mBufferSize(bufferSize),
+          mData(std::move(data)),
+          mOnDataStart(onDataStart),
+          mOnDataWrap(onDataWrap) {
+        ALOGI("StreamWriter data size: %d", (int)mData.size());
+    }
     ~StreamWriter() {
         stop();
         if (mEfGroup) {
@@ -998,9 +1011,12 @@
             ALOGE("command message queue write failed");
             return false;
         }
-        const size_t dataSize = std::min(mData.size(), mDataMQ->availableToWrite());
-        bool success = mDataMQ->write(mData.data(), dataSize);
+        if (mDataPosition == 0) mOnDataStart();
+        const size_t dataSize = std::min(mData.size() - mDataPosition, mDataMQ->availableToWrite());
+        bool success = mDataMQ->write(mData.data() + mDataPosition, dataSize);
         ALOGE_IF(!success, "data message queue write failed");
+        mDataPosition += dataSize;
+        if (mDataPosition >= mData.size()) mDataPosition = 0;
         mEfGroup->wake(static_cast<uint32_t>(MessageQueueFlagBits::NOT_EMPTY));
 
         uint32_t efState = 0;
@@ -1026,6 +1042,9 @@
             ALOGE("bad wait status: %d", ret);
             success = false;
         }
+        if (success && mDataPosition == 0) {
+            success = mOnDataWrap();
+        }
         return success;
     }
 
@@ -1033,6 +1052,9 @@
     IStreamOut* const mStream;
     const size_t mBufferSize;
     std::vector<uint8_t> mData;
+    std::function<void()> mOnDataStart = []() {};
+    std::function<bool()> mOnDataWrap = []() { return true; };
+    size_t mDataPosition = 0;
     std::unique_ptr<CommandMQ> mCommandMQ;
     std::unique_ptr<DataMQ> mDataMQ;
     std::unique_ptr<StatusMQ> mStatusMQ;
@@ -1047,7 +1069,7 @@
 #if MAJOR_VERSION <= 6
         address.device = AudioDevice::OUT_DEFAULT;
 #elif MAJOR_VERSION >= 7
-        address.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_OUT_DEFAULT);
+        address = getAttachedDeviceAddress();
 #endif
         const AudioConfig& config = getConfig();
         auto flags = getOutputFlags();
@@ -1243,16 +1265,11 @@
 #if MAJOR_VERSION <= 6
         address.device = AudioDevice::IN_DEFAULT;
 #elif MAJOR_VERSION >= 7
-        auto maybeSourceAddress = getCachedPolicyConfig().getSourceDeviceForMixPort(
-                getDeviceName(), getMixPortName());
+        address = getAttachedDeviceAddress();
         auto& metadata = initMetadata.tracks[0];
-        if (maybeSourceAddress.has_value() &&
-            !xsd::isTelephonyDevice(maybeSourceAddress.value().deviceType)) {
-            address = maybeSourceAddress.value();
+        if (!xsd::isTelephonyDevice(address.deviceType)) {
             metadata.source = toString(xsd::AudioSource::AUDIO_SOURCE_UNPROCESSED);
             metadata.channelMask = getConfig().base.channelMask;
-        } else {
-            address.deviceType = toString(xsd::AudioDevice::AUDIO_DEVICE_IN_DEFAULT);
         }
 #if MAJOR_VERSION == 7 && MINOR_VERSION >= 1
         auto flagsIt = std::find(flags.begin(), flags.end(),
diff --git a/audio/core/all-versions/vts/functional/AudioTestDefinitions.h b/audio/core/all-versions/vts/functional/AudioTestDefinitions.h
index 802b87b..3de06c3 100644
--- a/audio/core/all-versions/vts/functional/AudioTestDefinitions.h
+++ b/audio/core/all-versions/vts/functional/AudioTestDefinitions.h
@@ -39,9 +39,10 @@
         std::variant<android::hardware::audio::common::COMMON_TYPES_CPP_VERSION::AudioInputFlag,
                      android::hardware::audio::common::COMMON_TYPES_CPP_VERSION::AudioOutputFlag>>;
 #elif MAJOR_VERSION >= 7
-enum { PARAM_DEVICE, PARAM_PORT_NAME, PARAM_CONFIG, PARAM_FLAGS };
+enum { PARAM_DEVICE, PARAM_PORT_NAME, PARAM_ATTACHED_DEV_ADDR, PARAM_CONFIG, PARAM_FLAGS };
 using DeviceConfigParameter =
         std::tuple<DeviceParameter, std::string,
+                   android::hardware::audio::common::COMMON_TYPES_CPP_VERSION::DeviceAddress,
                    android::hardware::audio::common::COMMON_TYPES_CPP_VERSION::AudioConfig,
                    std::vector<android::hardware::audio::CORE_TYPES_CPP_VERSION::AudioInOutFlag>>;
 #endif
diff --git a/audio/core/all-versions/vts/functional/VtsHalAudioV7_0TargetTest.xml b/audio/core/all-versions/vts/functional/VtsHalAudioV7_0TargetTest.xml
index f0e2695..8da5744 100644
--- a/audio/core/all-versions/vts/functional/VtsHalAudioV7_0TargetTest.xml
+++ b/audio/core/all-versions/vts/functional/VtsHalAudioV7_0TargetTest.xml
@@ -29,6 +29,7 @@
         <option name="cleanup" value="true" />
         <option name="push" value="VtsHalAudioV7_0TargetTest->/data/local/tmp/VtsHalAudioV7_0TargetTest" />
         <option name="push" value="audio_policy_configuration_V7_0.xsd->/data/local/tmp/audio_policy_configuration_V7_0.xsd" />
+        <option name="push" value="sine882hz3s.mp3->/data/local/tmp/sine882hz3s.mp3" />
     </target_preparer>
 
     <test class="com.android.tradefed.testtype.GTest" >
diff --git a/audio/core/all-versions/vts/functional/VtsHalAudioV7_1TargetTest.xml b/audio/core/all-versions/vts/functional/VtsHalAudioV7_1TargetTest.xml
index 7ce1477..227df18 100644
--- a/audio/core/all-versions/vts/functional/VtsHalAudioV7_1TargetTest.xml
+++ b/audio/core/all-versions/vts/functional/VtsHalAudioV7_1TargetTest.xml
@@ -29,6 +29,8 @@
         <option name="cleanup" value="true" />
         <option name="push" value="VtsHalAudioV7_1TargetTest->/data/local/tmp/VtsHalAudioV7_1TargetTest" />
         <option name="push" value="audio_policy_configuration_V7_1.xsd->/data/local/tmp/audio_policy_configuration_V7_1.xsd" />
+        <option name="push" value="sine882hz3s.mp3->/data/local/tmp/sine882hz3s.mp3" />
+
     </target_preparer>
 
     <test class="com.android.tradefed.testtype.GTest" >
diff --git a/audio/core/all-versions/vts/functional/data/sine882hz3s.mp3 b/audio/core/all-versions/vts/functional/data/sine882hz3s.mp3
new file mode 100644
index 0000000..0604f9b
--- /dev/null
+++ b/audio/core/all-versions/vts/functional/data/sine882hz3s.mp3
Binary files differ
diff --git a/audio/effect/all-versions/default/Effect.cpp b/audio/effect/all-versions/default/Effect.cpp
index 3baafc9..def3a3f 100644
--- a/audio/effect/all-versions/default/Effect.cpp
+++ b/audio/effect/all-versions/default/Effect.cpp
@@ -238,12 +238,27 @@
 }
 
 // static
-std::vector<uint8_t> Effect::parameterToHal(uint32_t paramSize, const void* paramData,
-                                            uint32_t valueSize, const void** valueData) {
+bool Effect::parameterToHal(uint32_t paramSize, const void* paramData, uint32_t valueSize,
+                            const void** valueData, std::vector<uint8_t>* halParamBuffer) {
+    constexpr size_t kMaxSize = EFFECT_PARAM_SIZE_MAX - sizeof(effect_param_t);
+    if (paramSize > kMaxSize) {
+        ALOGE("%s: Parameter size is too big: %" PRIu32, __func__, paramSize);
+        return false;
+    }
     size_t valueOffsetFromData = alignedSizeIn<uint32_t>(paramSize) * sizeof(uint32_t);
+    if (valueOffsetFromData > kMaxSize) {
+        ALOGE("%s: Aligned parameter size is too big: %zu", __func__, valueOffsetFromData);
+        return false;
+    }
+    if (valueSize > kMaxSize - valueOffsetFromData) {
+        ALOGE("%s: Value size is too big: %" PRIu32 ", max size is %zu", __func__, valueSize,
+              kMaxSize - valueOffsetFromData);
+        android_errorWriteLog(0x534e4554, "237291425");
+        return false;
+    }
     size_t halParamBufferSize = sizeof(effect_param_t) + valueOffsetFromData + valueSize;
-    std::vector<uint8_t> halParamBuffer(halParamBufferSize, 0);
-    effect_param_t* halParam = reinterpret_cast<effect_param_t*>(&halParamBuffer[0]);
+    halParamBuffer->resize(halParamBufferSize, 0);
+    effect_param_t* halParam = reinterpret_cast<effect_param_t*>(halParamBuffer->data());
     halParam->psize = paramSize;
     halParam->vsize = valueSize;
     memcpy(halParam->data, paramData, paramSize);
@@ -256,7 +271,7 @@
             *valueData = halParam->data + valueOffsetFromData;
         }
     }
-    return halParamBuffer;
+    return true;
 }
 
 Result Effect::analyzeCommandStatus(const char* commandName, const char* context, status_t status) {
@@ -314,11 +329,15 @@
                                 GetParameterSuccessCallback onSuccess) {
     // As it is unknown what method HAL uses for copying the provided parameter data,
     // it is safer to make sure that input and output buffers do not overlap.
-    std::vector<uint8_t> halCmdBuffer =
-        parameterToHal(paramSize, paramData, requestValueSize, nullptr);
+    std::vector<uint8_t> halCmdBuffer;
+    if (!parameterToHal(paramSize, paramData, requestValueSize, nullptr, &halCmdBuffer)) {
+        return Result::INVALID_ARGUMENTS;
+    }
     const void* valueData = nullptr;
-    std::vector<uint8_t> halParamBuffer =
-        parameterToHal(paramSize, paramData, replyValueSize, &valueData);
+    std::vector<uint8_t> halParamBuffer;
+    if (!parameterToHal(paramSize, paramData, replyValueSize, &valueData, &halParamBuffer)) {
+        return Result::INVALID_ARGUMENTS;
+    }
     uint32_t halParamBufferSize = halParamBuffer.size();
 
     return sendCommandReturningStatusAndData(
@@ -472,8 +491,10 @@
 
 Result Effect::setParameterImpl(uint32_t paramSize, const void* paramData, uint32_t valueSize,
                                 const void* valueData) {
-    std::vector<uint8_t> halParamBuffer =
-        parameterToHal(paramSize, paramData, valueSize, &valueData);
+    std::vector<uint8_t> halParamBuffer;
+    if (!parameterToHal(paramSize, paramData, valueSize, &valueData, &halParamBuffer)) {
+        return Result::INVALID_ARGUMENTS;
+    }
     return sendCommandReturningStatus(EFFECT_CMD_SET_PARAM, "SET_PARAM", halParamBuffer.size(),
                                       &halParamBuffer[0]);
 }
diff --git a/audio/effect/all-versions/default/Effect.h b/audio/effect/all-versions/default/Effect.h
index 011544d..f0b65df 100644
--- a/audio/effect/all-versions/default/Effect.h
+++ b/audio/effect/all-versions/default/Effect.h
@@ -211,8 +211,8 @@
                                              channel_config_t* halConfig);
     static void effectOffloadParamToHal(const EffectOffloadParameter& offload,
                                         effect_offload_param_t* halOffload);
-    static std::vector<uint8_t> parameterToHal(uint32_t paramSize, const void* paramData,
-                                               uint32_t valueSize, const void** valueData);
+    static bool parameterToHal(uint32_t paramSize, const void* paramData, uint32_t valueSize,
+                               const void** valueData, std::vector<uint8_t>* halParamBuffer);
 
     Result analyzeCommandStatus(const char* commandName, const char* context, status_t status);
     void getConfigImpl(int commandCode, const char* commandName, GetConfigCallback cb);
diff --git a/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp b/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp
index e59423f..ffa4c56 100644
--- a/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp
+++ b/audio/effect/all-versions/vts/functional/VtsHalAudioEffectTargetTest.cpp
@@ -623,6 +623,23 @@
     EXPECT_TRUE(ret.isOk());
 }
 
+TEST_P(AudioEffectHidlTest, GetParameterInvalidMaxReplySize) {
+    description("Verify that GetParameter caps the maximum reply size");
+    // Use a non-empty parameter to avoid being rejected by any earlier checks.
+    hidl_vec<uint8_t> parameter;
+    parameter.resize(16);
+    // Use very large size to ensure that the service does not crash. Since parameters
+    // are specific to each effect, and some effects may not have parameters at all,
+    // simply checking the return value would not reveal an issue of using an uncapped value.
+    const uint32_t veryLargeReplySize = std::numeric_limits<uint32_t>::max() - 100;
+    Result retval = Result::OK;
+    Return<void> ret =
+            effect->getParameter(parameter, veryLargeReplySize,
+                                 [&](Result r, const hidl_vec<uint8_t>&) { retval = r; });
+    EXPECT_TRUE(ret.isOk());
+    EXPECT_EQ(Result::INVALID_ARGUMENTS, retval);
+}
+
 TEST_P(AudioEffectHidlTest, GetSupportedConfigsForFeature) {
     description("Verify that GetSupportedConfigsForFeature does not crash");
     Return<void> ret = effect->getSupportedConfigsForFeature(
diff --git a/authsecret/aidl/Android.bp b/authsecret/aidl/Android.bp
index 432c1b9..90e128d 100644
--- a/authsecret/aidl/Android.bp
+++ b/authsecret/aidl/Android.bp
@@ -16,11 +16,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: ["1"],
 }
diff --git a/automotive/OWNERS b/automotive/OWNERS
index 43c5f3e..09e257c 100644
--- a/automotive/OWNERS
+++ b/automotive/OWNERS
@@ -1,6 +1 @@
-pirozzoj@google.com
-twasilczyk@google.com
-krachuri@google.com
-gurunagarajan@google.com
-keunyoung@google.com
-felipeal@google.com
+include platform/packages/services/Car:/OWNERS
diff --git a/automotive/audiocontrol/OWNERS b/automotive/audiocontrol/OWNERS
new file mode 100644
index 0000000..f55eff3
--- /dev/null
+++ b/automotive/audiocontrol/OWNERS
@@ -0,0 +1 @@
+oscarazu@google.com
diff --git a/automotive/can/1.0/default/libnetdevice/can.cpp b/automotive/can/1.0/default/libnetdevice/can.cpp
index 083f4f0..2a0545a 100644
--- a/automotive/can/1.0/default/libnetdevice/can.cpp
+++ b/automotive/can/1.0/default/libnetdevice/can.cpp
@@ -80,7 +80,7 @@
 
     {
         auto linkinfo = req.addNested(IFLA_LINKINFO);
-        req.add(IFLA_INFO_KIND, "can");
+        req.addBuffer(IFLA_INFO_KIND, "can");
         {
             auto infodata = req.addNested(IFLA_INFO_DATA);
             /* For CAN FD, it would require to add IFLA_CAN_DATA_BITTIMING
diff --git a/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp b/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp
index 4c5b309..2d3b417 100644
--- a/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp
+++ b/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp
@@ -60,7 +60,7 @@
 
     {
         auto linkinfo = req.addNested(IFLA_LINKINFO);
-        req.add(IFLA_INFO_KIND, type);
+        req.addBuffer(IFLA_INFO_KIND, type);
     }
 
     nl::Socket sock(NETLINK_ROUTE);
diff --git a/automotive/can/1.0/default/libnetdevice/vlan.cpp b/automotive/can/1.0/default/libnetdevice/vlan.cpp
index ee02f7b..35b21b8 100644
--- a/automotive/can/1.0/default/libnetdevice/vlan.cpp
+++ b/automotive/can/1.0/default/libnetdevice/vlan.cpp
@@ -40,7 +40,7 @@
 
     {
         auto linkinfo = req.addNested(IFLA_LINKINFO);
-        req.add(IFLA_INFO_KIND, "vlan");
+        req.addBuffer(IFLA_INFO_KIND, "vlan");
 
         {
             auto linkinfo = req.addNested(IFLA_INFO_DATA);
diff --git a/automotive/can/1.0/default/libnl++/MessageFactory.cpp b/automotive/can/1.0/default/libnl++/MessageFactory.cpp
index 6f35897..eff068e 100644
--- a/automotive/can/1.0/default/libnl++/MessageFactory.cpp
+++ b/automotive/can/1.0/default/libnl++/MessageFactory.cpp
@@ -27,8 +27,8 @@
 
 nlattr* MessageFactoryBase::add(nlmsghdr* msg, size_t maxLen, nlattrtype_t type, const void* data,
                                 size_t dataLen) {
-    const auto totalAttrLen = impl::space<nlattr>(dataLen);
-    const auto newLen = impl::align(msg->nlmsg_len) + totalAttrLen;
+    const auto totalAttrLen = impl::length<nlattr>(dataLen);
+    const auto newLen = impl::align(msg->nlmsg_len) + impl::align(totalAttrLen);
     if (newLen > maxLen) {
         LOG(ERROR) << "Can't add attribute of size " << dataLen  //
                    << " - exceeded maxLen: " << newLen << " > " << maxLen;
diff --git a/automotive/can/1.0/default/libnl++/Socket.cpp b/automotive/can/1.0/default/libnl++/Socket.cpp
index cc1d839..221063d 100644
--- a/automotive/can/1.0/default/libnl++/Socket.cpp
+++ b/automotive/can/1.0/default/libnl++/Socket.cpp
@@ -47,6 +47,17 @@
     }
 }
 
+void Socket::clearPollErr() {
+    sockaddr_nl sa = {};
+    socklen_t saLen = sizeof(sa);
+    const auto bytesReceived = recvfrom(mFd.get(), mReceiveBuffer.data(), mReceiveBuffer.size(), 0,
+                                        reinterpret_cast<sockaddr*>(&sa), &saLen);
+    if (errno != EINVAL) {
+        PLOG(WARNING) << "clearPollError() caught unexpected error: ";
+    }
+    CHECK_LE(bytesReceived, 0) << "clearPollError() didn't find an error!";
+}
+
 bool Socket::send(const Buffer<nlmsghdr>& msg, const sockaddr_nl& sa) {
     if constexpr (kSuperVerbose) {
         LOG(VERBOSE) << (mFailed ? "(not) " : "") << "sending to " << sa.nl_pid << ": "
@@ -110,6 +121,13 @@
     if constexpr (kSuperVerbose) {
         LOG(VERBOSE) << "received from " << sa.nl_pid << ": " << toString(msg, mProtocol);
     }
+    long headerByteTotal = 0;
+    for (const auto hdr : msg) {
+        headerByteTotal += hdr->nlmsg_len;
+    }
+    if (bytesReceived != headerByteTotal) {
+        LOG(ERROR) << "received " << bytesReceived << " bytes, header claims " << headerByteTotal;
+    }
     return {msg, sa};
 }
 
@@ -159,6 +177,7 @@
 }
 
 pollfd Socket::preparePoll(short events) {
+    CHECK(mFd.get() > 0) << "Netlink socket fd is invalid!";
     return {mFd.get(), events, 0};
 }
 
diff --git a/automotive/can/1.0/default/libnl++/include/libnl++/MessageFactory.h b/automotive/can/1.0/default/libnl++/include/libnl++/MessageFactory.h
index c3d72c5..a5a425e 100644
--- a/automotive/can/1.0/default/libnl++/include/libnl++/MessageFactory.h
+++ b/automotive/can/1.0/default/libnl++/include/libnl++/MessageFactory.h
@@ -106,18 +106,25 @@
      */
     template <class A>
     void add(nlattrtype_t type, const A& attr) {
-        add(type, &attr, sizeof(attr));
+        addInternal(type, &attr, sizeof(attr));
     }
 
+    // It will always send the last null character, otherwise use addBuffer
+    // variant instead
     template <>
     void add(nlattrtype_t type, const std::string& s) {
-        add(type, s.c_str(), s.size() + 1);
+        addInternal(type, s.c_str(), s.size() + 1);
+    }
+
+    void addBuffer(nlattrtype_t type, const std::string_view& s) {
+        addInternal(type, s.data(), s.size());
     }
 
     /** Guard class to frame nested attributes. \see addNested(nlattrtype_t). */
     class [[nodiscard]] NestedGuard {
       public:
-        NestedGuard(MessageFactory & req, nlattrtype_t type) : mReq(req), mAttr(req.add(type)) {}
+        NestedGuard(MessageFactory& req, nlattrtype_t type)
+            : mReq(req), mAttr(req.addInternal(type)) {}
         ~NestedGuard() { closeNested(&mReq.mMessage.header, mAttr); }
 
       private:
@@ -138,7 +145,7 @@
      *    MessageFactory<ifinfomsg> req(RTM_NEWLINK, NLM_F_REQUEST);
      *    {
      *        auto linkinfo = req.addNested(IFLA_LINKINFO);
-     *        req.add(IFLA_INFO_KIND, "can");
+     *        req.addBuffer(IFLA_INFO_KIND, "can");
      *        {
      *            auto infodata = req.addNested(IFLA_INFO_DATA);
      *            req.add(IFLA_CAN_BITTIMING, bitTimingStruct);
@@ -154,7 +161,7 @@
     Message mMessage = {};
     bool mIsGood = true;
 
-    nlattr* add(nlattrtype_t type, const void* data = nullptr, size_t len = 0) {
+    nlattr* addInternal(nlattrtype_t type, const void* data = nullptr, size_t len = 0) {
         if (!mIsGood) return nullptr;
         auto attr = MessageFactoryBase::add(&mMessage.header, sizeof(mMessage), type, data, len);
         if (attr == nullptr) mIsGood = false;
diff --git a/automotive/can/1.0/default/libnl++/include/libnl++/Socket.h b/automotive/can/1.0/default/libnl++/include/libnl++/Socket.h
index 7ec0f7b..996a350 100644
--- a/automotive/can/1.0/default/libnl++/include/libnl++/Socket.h
+++ b/automotive/can/1.0/default/libnl++/include/libnl++/Socket.h
@@ -55,6 +55,12 @@
     Socket(int protocol, unsigned pid = 0, uint32_t groups = 0);
 
     /**
+     * Attempt to clear POLLERR by recv-ing.
+     * TODO(224850481): determine if this is necessary, or if the socket is locked up anyway.
+     */
+    void clearPollErr();
+
+    /**
      * Send Netlink message with incremented sequence number to the Kernel.
      *
      * \param msg Message to send. Its sequence number will be updated.
diff --git a/automotive/can/1.0/default/libnl++/include/libnl++/bits.h b/automotive/can/1.0/default/libnl++/include/libnl++/bits.h
index 4c8f1aa..b6573b3 100644
--- a/automotive/can/1.0/default/libnl++/include/libnl++/bits.h
+++ b/automotive/can/1.0/default/libnl++/include/libnl++/bits.h
@@ -36,11 +36,19 @@
 }
 
 /**
+ * Equivalent to NLMSG_LENGTH(len).
+ */
+template <typename H>
+constexpr size_t length(size_t len) {
+    return align(sizeof(H)) + len;
+}
+
+/**
  * Equivalent to NLMSG_SPACE(len).
  */
 template <typename H>
 constexpr size_t space(size_t len) {
-    return align(align(sizeof(H)) + len);
+    return align(length<H>(len));
 }
 
 /**
diff --git a/automotive/can/1.0/default/libnl++/protocols/generic/FamilyTracker.cpp b/automotive/can/1.0/default/libnl++/protocols/generic/FamilyTracker.cpp
index 900560e..3ad101e 100644
--- a/automotive/can/1.0/default/libnl++/protocols/generic/FamilyTracker.cpp
+++ b/automotive/can/1.0/default/libnl++/protocols/generic/FamilyTracker.cpp
@@ -30,6 +30,7 @@
     const auto familyName = msg.attributes.get<std::string>(CTRL_ATTR_FAMILY_NAME);
     const auto familyId = msg.attributes.get<uint16_t>(CTRL_ATTR_FAMILY_ID);
 
+    // TODO(224845900): NETLINK_GENERIC == 16, and (erroneously?) sets off this warning
     if (familyId < GENL_START_ALLOC) {
         LOG(WARNING) << "Invalid family ID: " << familyId;
         return true;
diff --git a/automotive/can/OWNERS b/automotive/can/OWNERS
new file mode 100644
index 0000000..ffa4828
--- /dev/null
+++ b/automotive/can/OWNERS
@@ -0,0 +1,3 @@
+kevinme@google.com
+chrisweir@google.com
+twasilczyk@google.com
diff --git a/automotive/evs/1.1/default/Android.bp b/automotive/evs/1.1/default/Android.bp
index 4c08ef3..4172e63 100644
--- a/automotive/evs/1.1/default/Android.bp
+++ b/automotive/evs/1.1/default/Android.bp
@@ -13,6 +13,7 @@
     proprietary: true,
     relative_install_path: "hw",
     srcs: [
+        ":libgui_frame_event_aidl",
         "*.cpp",
     ],
     init_rc: ["android.hardware.automotive.evs@1.1-service.rc"],
diff --git a/automotive/evs/common/utils/default/test/fuzz/FormatConvertFuzzer.cpp b/automotive/evs/common/utils/default/test/fuzz/FormatConvertFuzzer.cpp
index 58423c8..7f90501 100644
--- a/automotive/evs/common/utils/default/test/fuzz/FormatConvertFuzzer.cpp
+++ b/automotive/evs/common/utils/default/test/fuzz/FormatConvertFuzzer.cpp
@@ -32,9 +32,10 @@
 
     // API have a requirement that width must be divied by 16 except yuyvtorgb
     int min_height = 2;
-    int max_height = (image_pixel_size / 16) & ~(1);  // must be even number
+    int max_height = (image_pixel_size / 16);
     int height = fdp.ConsumeIntegralInRange<uint32_t>(min_height, max_height);
-    int width = (image_pixel_size / height) & ~(16);  // must be divisible by 16
+    height &= ~(1);  // must be even number
+    int width = (image_pixel_size / height) & ~(0xF);  // must be divisible by 16
 
     uint8_t* src = (uint8_t*)(data + 4);
     uint32_t* tgt = (uint32_t*)malloc(sizeof(uint32_t) * image_pixel_size);
diff --git a/automotive/occupant_awareness/aidl/Android.bp b/automotive/occupant_awareness/aidl/Android.bp
index 6ddc127..1a8124c 100644
--- a/automotive/occupant_awareness/aidl/Android.bp
+++ b/automotive/occupant_awareness/aidl/Android.bp
@@ -23,11 +23,6 @@
                 "com.android.car.framework",
             ],
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: ["1"],
 }
diff --git a/automotive/occupant_awareness/aidl/default/Android.bp b/automotive/occupant_awareness/aidl/default/Android.bp
index 66af9de..3dc7e0d 100644
--- a/automotive/occupant_awareness/aidl/default/Android.bp
+++ b/automotive/occupant_awareness/aidl/default/Android.bp
@@ -39,3 +39,28 @@
         "android.hardware.automotive.occupant_awareness-V1-ndk",
     ],
 }
+
+cc_fuzz {
+    name: "android.hardware.automotive.occupant_awareness-service.fuzzer",
+    static_libs: [
+        "android.hardware.automotive.occupant_awareness-V1-ndk",
+        "libbase",
+        "libbinder_random_parcel",
+        "libcutils",
+        "liblog",
+    ],
+    shared_libs: [
+        "libbinder_ndk",
+        "libbinder",
+        "libutils",
+    ],
+    srcs: [
+        "fuzzer.cpp",
+        "OccupantAwareness.cpp",
+    ],
+    fuzz_config: {
+        cc: [
+            "keithmok@google.com",
+        ],
+    },
+}
diff --git a/automotive/occupant_awareness/aidl/default/fuzzer.cpp b/automotive/occupant_awareness/aidl/default/fuzzer.cpp
new file mode 100644
index 0000000..551b83a
--- /dev/null
+++ b/automotive/occupant_awareness/aidl/default/fuzzer.cpp
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <fuzzbinder/libbinder_ndk_driver.h>
+#include <fuzzer/FuzzedDataProvider.h>
+
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+#include "OccupantAwareness.h"
+
+using ::aidl::android::hardware::automotive::occupant_awareness::IOccupantAwareness;
+using ::android::fuzzService;
+using ::android::hardware::automotive::occupant_awareness::V1_0::implementation::OccupantAwareness;
+using ::ndk::ScopedAStatus;
+using ::ndk::SharedRefBase;
+
+extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
+    auto occupantAwareness = SharedRefBase::make<OccupantAwareness>();
+
+    fuzzService(occupantAwareness->asBinder().get(), FuzzedDataProvider(data, size));
+
+    return 0;
+}
diff --git a/automotive/sv/OWNERS b/automotive/sv/OWNERS
new file mode 100644
index 0000000..af6788b
--- /dev/null
+++ b/automotive/sv/OWNERS
@@ -0,0 +1 @@
+tanmayp@google.com
diff --git a/automotive/vehicle/2.0/default/VehicleService.cpp b/automotive/vehicle/2.0/default/VehicleService.cpp
index 12e15f9..2968232 100644
--- a/automotive/vehicle/2.0/default/VehicleService.cpp
+++ b/automotive/vehicle/2.0/default/VehicleService.cpp
@@ -33,7 +33,7 @@
     auto store = std::make_unique<VehiclePropertyStore>();
     auto connector = std::make_unique<DefaultVehicleConnector>();
     auto hal = std::make_unique<DefaultVehicleHal>(store.get(), connector.get());
-    auto service = std::make_unique<VehicleHalManager>(hal.get());
+    auto service = android::sp<VehicleHalManager>::make(hal.get());
     connector->setValuePool(hal->getValuePool());
 
     android::hardware::configureRpcThreadpool(4, true /* callerWillJoin */);
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
index cfbbbd3..edc8949 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/DefaultConfig.h
@@ -374,6 +374,15 @@
 
         {.config =
                  {
+                         .prop = toInt(VehicleProperty::FUEL_VOLUME_DISPLAY_UNITS),
+                         .access = VehiclePropertyAccess::READ_WRITE,
+                         .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+                         .configArray = {(int)VehicleUnit::LITER, (int)VehicleUnit::US_GALLON},
+                 },
+         .initialValue = {.int32Values = {(int)VehicleUnit::LITER}}},
+
+        {.config =
+                 {
                          .prop = toInt(VehicleProperty::HW_KEY_INPUT),
                          .access = VehiclePropertyAccess::READ,
                          .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
@@ -1109,6 +1118,19 @@
                         },
                 .initialValue = {.stringValue = {"Test"}},
         },
+        // This property is later defined in the AIDL VHAL interface. However, HIDL VHAL might
+        // require support for this property to meet EU regulation.
+        {
+                .config =
+                        {
+                                // GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT
+                                .prop = 0x11400F47,
+                                .access = VehiclePropertyAccess::READ,
+                                .changeMode = VehiclePropertyChangeMode::STATIC,
+                        },
+                // GsrComplianceRequirementType::GSR_COMPLIANCE_REQUIRED_V1
+                .initialValue = {.int32Values = {1}},
+        },
 #ifdef ENABLE_VENDOR_CLUSTER_PROPERTY_FOR_TESTING
         // Vendor propetry for E2E ClusterHomeService testing.
         {
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/GeneratorHub.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/GeneratorHub.cpp
index 9be9ea7..503afd2 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/GeneratorHub.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/GeneratorHub.cpp
@@ -28,11 +28,18 @@
 
 namespace impl {
 
-GeneratorHub::GeneratorHub(const OnHalEvent& onHalEvent)
-    : mOnHalEvent(onHalEvent), mThread(&GeneratorHub::run, this) {}
+GeneratorHub::GeneratorHub(const OnHalEvent& onHalEvent) : mOnHalEvent(onHalEvent) {
+    mThread = std::thread(&GeneratorHub::run, this);
+}
 
 GeneratorHub::~GeneratorHub() {
-    mShuttingDownFlag.store(true);
+    {
+        // Even if the shared variable is atomic, it must be modified under the
+        // mutex in order to correctly publish the modification to the waiting
+        // thread.
+        std::unique_lock<std::mutex> g(mLock);
+        mShuttingDownFlag.store(true);
+    }
     mCond.notify_all();
     if (mThread.joinable()) {
         mThread.join();
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/tests/DefaultVhalImpl_test.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/tests/DefaultVhalImpl_test.cpp
index e3c8dd6..74f5a7a 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/tests/DefaultVhalImpl_test.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/tests/DefaultVhalImpl_test.cpp
@@ -141,7 +141,7 @@
 TEST_F(DefaultVhalImplTest, testListProperties) {
     std::vector<VehiclePropConfig> configs = mHal->listProperties();
 
-    EXPECT_EQ((size_t)121, configs.size());
+    EXPECT_EQ((size_t)123, configs.size());
 }
 
 TEST_F(DefaultVhalImplTest, testGetDefaultPropertyFloat) {
@@ -402,7 +402,7 @@
     gotValue->timestamp = 0;
 
     std::string infoMake = toString(*gotValue);
-    EXPECT_THAT(std::string(buf), HasSubstr(infoMake));
+    EXPECT_THAT(std::string(buf, sizeof(buf)), HasSubstr(infoMake));
 }
 
 TEST_F(DefaultVhalImplTest, testSetPropInvalidAreaId) {
diff --git a/automotive/vehicle/README.md b/automotive/vehicle/README.md
new file mode 100644
index 0000000..e0f03e2
--- /dev/null
+++ b/automotive/vehicle/README.md
@@ -0,0 +1,26 @@
+# Vehicle Hardware Abstraction Layer (VHAL)
+---
+
+This directory stores the VHAL interface definition and VHAL reference
+implementation.
+
+## 2.0 (deprecated)
+
+HIDL based VHAL interface and reference implementation. 
+
+## aidl
+
+AIDL based VHAL interfadce and reference implementation.
+
+## proto
+
+Protobuf used to pass message between emulator VHAL and emulator.
+
+## tools
+
+Dev tools related to VHAL.
+
+## vts
+
+VTS test for VHAL. The VTS test works for both AIDL and HIDL VHAL
+implementation. Vendor implementation of VHAL must passes VTS.
diff --git a/automotive/vehicle/TEST_MAPPING b/automotive/vehicle/TEST_MAPPING
index 7e42554..fa0b791 100644
--- a/automotive/vehicle/TEST_MAPPING
+++ b/automotive/vehicle/TEST_MAPPING
@@ -10,6 +10,12 @@
       "name": "VehicleHalVehicleUtilsTest"
     },
     {
+      "name": "VehiclePropertyAnnotationCppTest"
+    },
+    {
+      "name": "VehiclePropertyAnnotationJavaTest"
+    },
+    {
       "name": "FakeVehicleHardwareTest"
     },
     {
diff --git a/automotive/vehicle/aidl/README.md b/automotive/vehicle/aidl/README.md
new file mode 100644
index 0000000..09f03b4
--- /dev/null
+++ b/automotive/vehicle/aidl/README.md
@@ -0,0 +1,23 @@
+# AIDL Vehicle Hardware Abstraction Layer (VHAL)
+---
+
+This directory stores the AIDL VHAL interface and reference implementation.
+
+## aidl_api
+
+Auto-generated current and previous versions of AIDL VHAL api.
+
+## aidl_test
+
+Contains a test to test that all HIDL VHAL properties are supported in
+AIDL VHAL.
+
+## android
+
+Contains AIDL VHAL interface definition. The main interface file is
+`android/hardware/automotive/vehicle/IVehicle.aidl`.
+
+## impl
+
+Reference implementation for AIDL VHAL and useful libraries for implementing
+vendor AIDL VHAL.
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/GsrComplianceRequirementType.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/GsrComplianceRequirementType.aidl
new file mode 100644
index 0000000..0d3a061
--- /dev/null
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/GsrComplianceRequirementType.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.automotive.vehicle;
+@Backing(type="int") @VintfStability
+enum GsrComplianceRequirementType {
+  GSR_COMPLIANCE_NOT_REQUIRED = 0,
+  GSR_COMPLIANCE_REQUIRED_THROUGH_SYSTEM_IMAGE = 1,
+}
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 04f8fa3..2d0cde5 100644
--- a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -206,4 +206,5 @@
   EV_REGENERATIVE_BRAKING_STATE = 289410884,
   TRAILER_PRESENT = 289410885,
   VEHICLE_CURB_WEIGHT = 289410886,
+  GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT = 289410887,
 }
diff --git a/automotive/vehicle/aidl/aidl_test/Android.bp b/automotive/vehicle/aidl/aidl_test/Android.bp
index 5284a0a..cf7ef1e 100644
--- a/automotive/vehicle/aidl/aidl_test/Android.bp
+++ b/automotive/vehicle/aidl/aidl_test/Android.bp
@@ -20,7 +20,7 @@
 
 cc_test {
     name: "VehicleHalAidlHidlCompatibilityTest",
-    srcs: ["*.cpp"],
+    srcs: ["AidlHidlCompatibilityTest.cpp"],
     shared_libs: [
         "libbinder_ndk",
         "libhidlbase",
@@ -35,3 +35,25 @@
     test_suites: ["device-tests"],
     vendor: true,
 }
+
+cc_test {
+    name: "VehiclePropertyAnnotationCppTest",
+    srcs: ["VehiclePropertyAnnotationCppTest.cpp"],
+    header_libs: ["IVehicleGeneratedHeaders"],
+    defaults: ["VehicleHalInterfaceDefaults"],
+    test_suites: ["general-tests"],
+}
+
+android_test {
+    name: "VehiclePropertyAnnotationJavaTest",
+    srcs: [
+        "VehiclePropertyAnnotationJavaTest.java",
+        ":IVehicleGeneratedJavaFiles",
+    ],
+    static_libs: [
+        "android.hardware.automotive.vehicle-V2-java",
+        "androidx.test.runner",
+        "truth-prebuilt",
+    ],
+    test_suites: ["general-tests"],
+}
diff --git a/automotive/vehicle/aidl/aidl_test/AndroidManifest.xml b/automotive/vehicle/aidl/aidl_test/AndroidManifest.xml
new file mode 100644
index 0000000..00fdf50
--- /dev/null
+++ b/automotive/vehicle/aidl/aidl_test/AndroidManifest.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="android.hardware.automotive.vehicle" >
+
+    <application/>
+
+    <instrumentation android:name="androidx.test.runner.AndroidJUnitRunner"
+                     android:targetPackage="android.hardware.automotive.vehicle"
+                     android:label="test to verify VHAL annotation"/>
+
+</manifest>
\ No newline at end of file
diff --git a/automotive/vehicle/aidl/aidl_test/VehiclePropertyAnnotationCppTest.cpp b/automotive/vehicle/aidl/aidl_test/VehiclePropertyAnnotationCppTest.cpp
new file mode 100644
index 0000000..a4bbbe8
--- /dev/null
+++ b/automotive/vehicle/aidl/aidl_test/VehiclePropertyAnnotationCppTest.cpp
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <AccessForVehicleProperty.h>
+#include <ChangeModeForVehicleProperty.h>
+
+#include <aidl/android/hardware/automotive/vehicle/VehicleProperty.h>
+#include <gtest/gtest.h>
+#include <unordered_set>
+
+namespace aidl_vehicle = ::aidl::android::hardware::automotive::vehicle;
+using aidl_vehicle::AccessForVehicleProperty;
+using aidl_vehicle::ChangeModeForVehicleProperty;
+using aidl_vehicle::VehicleProperty;
+
+namespace {
+    template<class T>
+    bool doesAnnotationMapContainsAllProps(std::unordered_map<VehicleProperty, T> annotationMap) {
+        for (const VehicleProperty& v : ::ndk::enum_range<VehicleProperty>()) {
+            std::string name = aidl_vehicle::toString(v);
+            if (name == "INVALID") {
+                continue;
+            }
+            if (annotationMap.find(v) == annotationMap.end()) {
+                return false;
+            }
+        }
+        return true;
+    }
+
+}  // namespace
+
+TEST(VehiclePropertyAnnotationCppTest, testChangeMode) {
+    ASSERT_TRUE(doesAnnotationMapContainsAllProps(ChangeModeForVehicleProperty))
+            << "Outdated annotation-generated AIDL files. Please run "
+            << "generate_annotation_enums.py to update.";
+}
+
+TEST(VehiclePropertyAnnotationCppTest, testAccess) {
+    ASSERT_TRUE(doesAnnotationMapContainsAllProps(AccessForVehicleProperty))
+            << "Outdated annotation-generated AIDL files. Please run "
+            << "generate_annotation_enums.py to update.";
+}
diff --git a/automotive/vehicle/aidl/aidl_test/VehiclePropertyAnnotationJavaTest.java b/automotive/vehicle/aidl/aidl_test/VehiclePropertyAnnotationJavaTest.java
new file mode 100644
index 0000000..ef49299
--- /dev/null
+++ b/automotive/vehicle/aidl/aidl_test/VehiclePropertyAnnotationJavaTest.java
@@ -0,0 +1,60 @@
+package android.hardware.automotive.vehicle;
+
+import static com.google.common.truth.Truth.assertWithMessage;
+
+import static org.junit.Assert.fail;
+
+import androidx.test.filters.SmallTest;
+
+import org.junit.Test;
+import org.junit.runner.RunWith;
+import org.junit.runners.JUnit4;
+
+import java.lang.reflect.Field;
+import java.lang.reflect.Modifier;
+import java.util.Map;
+
+@RunWith(JUnit4.class)
+public class VehiclePropertyAnnotationJavaTest {
+
+    private boolean doesAnnotationMapContainsAllProps(Map<Integer, Integer> annotationMap) {
+        for (Field field : VehicleProperty.class.getDeclaredFields()) {
+            int modifiers = field.getModifiers();
+            try {
+                if (Modifier.isStatic(modifiers) && Modifier.isFinal(modifiers)
+                        && Modifier.isPublic(modifiers) && field.getType().equals(int.class)) {
+                    int propId = field.getInt(/* obj= */ null);
+                    if (propId == VehicleProperty.INVALID) {
+                        // Skip INVALID_PROP.
+                        continue;
+                    }
+                    if (annotationMap.get(propId) == null) {
+                        return false;
+                    }
+                }
+            } catch (IllegalAccessException e) {
+                throw new IllegalStateException(
+                        "Cannot access a member for VehicleProperty.class", e);
+            }
+        }
+        return true;
+    }
+
+    @Test
+    @SmallTest
+    public void testChangeMode() {
+        assertWithMessage("Outdated annotation-generated AIDL files. Please run "
+                + "generate_annotation_enums.py to update.")
+                .that(doesAnnotationMapContainsAllProps(ChangeModeForVehicleProperty.values))
+                .isTrue();
+    }
+
+    @Test
+    @SmallTest
+    public void testAccess() {
+        assertWithMessage("Outdated annotation-generated AIDL files. Please run "
+                + "generate_annotation_enums.py to update.")
+                .that(doesAnnotationMapContainsAllProps(AccessForVehicleProperty.values))
+                .isTrue();
+    }
+}
\ No newline at end of file
diff --git a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/GsrComplianceRequirementType.aidl b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/GsrComplianceRequirementType.aidl
new file mode 100644
index 0000000..e0609d5
--- /dev/null
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/GsrComplianceRequirementType.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.automotive.vehicle;
+
+/**
+ * Used by GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT to indicate what
+ * kind of general safety regulation compliance requirement is enforced.
+ */
+@VintfStability
+@Backing(type="int")
+enum GsrComplianceRequirementType {
+    /**
+     * GSR compliance is not required.
+     */
+    GSR_COMPLIANCE_NOT_REQUIRED = 0,
+    /**
+     * GSR compliance is required through system image.
+     */
+    GSR_COMPLIANCE_REQUIRED_THROUGH_SYSTEM_IMAGE = 1,
+}
diff --git a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 727b949..e8a6c85 100644
--- a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -46,32 +46,32 @@
     /**
      * VIN of vehicle
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      */
     INFO_VIN = 0x0100 + 0x10000000 + 0x01000000
             + 0x00100000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:STRING
     /**
      * Manufacturer of vehicle
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      */
     INFO_MAKE = 0x0101 + 0x10000000 + 0x01000000
             + 0x00100000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:STRING
     /**
      * Model of vehicle
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      */
     INFO_MODEL = 0x0102 + 0x10000000 + 0x01000000
             + 0x00100000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:STRING
     /**
      * Model year of vehicle.
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:YEAR
      */
     INFO_MODEL_YEAR = 0x0103 + 0x10000000 + 0x01000000
@@ -79,8 +79,8 @@
     /**
      * Fuel capacity of the vehicle in milliliters
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:MILLILITER
      */
     INFO_FUEL_CAPACITY = 0x0104 + 0x10000000 + 0x01000000
@@ -88,8 +88,8 @@
     /**
      * List of fuels the vehicle may use
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @data_enum FuelType
      */
     INFO_FUEL_TYPE = 0x0105 + 0x10000000 + 0x01000000
@@ -98,8 +98,8 @@
      * Battery capacity of the vehicle, if EV or hybrid.  This is the nominal
      * battery capacity when the vehicle is new.
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:WH
      */
     INFO_EV_BATTERY_CAPACITY = 0x0106 + 0x10000000 + 0x01000000
@@ -107,26 +107,26 @@
     /**
      * List of connectors this EV may use
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @change_mode VehiclePropertyChangeMode.STATIC
      * @data_enum EvConnectorType
-     * @access VehiclePropertyAccess:READ
+     * @access VehiclePropertyAccess.READ
      */
     INFO_EV_CONNECTOR_TYPE = 0x0107 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
     /**
      * Fuel door location
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @change_mode VehiclePropertyChangeMode.STATIC
      * @data_enum PortLocationType
-     * @access VehiclePropertyAccess:READ
+     * @access VehiclePropertyAccess.READ
      */
     INFO_FUEL_DOOR_LOCATION = 0x0108 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
     /**
      * EV port location
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @data_enum PortLocationType
      */
     INFO_EV_PORT_LOCATION = 0x0109 + 0x10000000 + 0x01000000
@@ -135,9 +135,9 @@
      * Driver's seat location
      * VHAL implementations must ignore the areaId. Use VehicleArea:GLOBAL.
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
+     * @change_mode VehiclePropertyChangeMode.STATIC
      * @data_enum VehicleAreaSeat
-     * @access VehiclePropertyAccess:READ
+     * @access VehiclePropertyAccess.READ
      */
     INFO_DRIVER_SEAT = 0x010A + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -153,8 +153,8 @@
      *  int32Values[6] = track width rear
      *  int32Values[7] = curb to curb turning radius
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:MILLIMETER
      */
     INFO_EXTERIOR_DIMENSIONS = 0x010B + 0x10000000 + 0x01000000
@@ -168,8 +168,8 @@
      *   int32Values[0] = PortLocationType::FRONT_LEFT
      *   int32Values[0] = PortLocationType::REAR_LEFT
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @data_enum PortLocationType
      */
     INFO_MULTI_EV_PORT_LOCATIONS = 0x010C + 0x10000000 + 0x01000000
@@ -177,8 +177,8 @@
     /**
      * Current odometer value of the vehicle
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:KILOMETER
      */
     PERF_ODOMETER = 0x0204 + 0x10000000 + 0x01000000
@@ -192,8 +192,8 @@
      * PERF_VEHICLE_SPEED is positive when the vehicle is moving forward, negative when moving
      * backward, and zero when not moving.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:METER_PER_SEC
      */
     PERF_VEHICLE_SPEED = 0x0207 + 0x10000000 + 0x01000000
@@ -204,8 +204,8 @@
      * Some cars display a slightly slower speed than the actual speed.  This is
      * usually displayed on the speedometer.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:METER_PER_SEC
      */
     PERF_VEHICLE_SPEED_DISPLAY = 0x0208 + 0x10000000 + 0x01000000
@@ -215,8 +215,8 @@
      *
      * Angle is in degrees.  Left is negative.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:DEGREES
      */
     PERF_STEERING_ANGLE = 0x0209 + 0x10000000 + 0x01000000
@@ -226,8 +226,8 @@
      *
      * Angle is in degrees.  Left is negative.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:DEGREES
      */
     PERF_REAR_STEERING_ANGLE = 0x0210 + 0x10000000 + 0x01000000
@@ -235,8 +235,8 @@
     /**
      * Temperature of engine coolant
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:CELSIUS
      */
     ENGINE_COOLANT_TEMP = 0x0301 + 0x10000000 + 0x01000000
@@ -244,8 +244,8 @@
     /**
      * Engine oil level
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleOilLevel
      */
     ENGINE_OIL_LEVEL = 0x0303 + 0x10000000 + 0x01000000
@@ -253,8 +253,8 @@
     /**
      * Temperature of engine oil
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:CELSIUS
      */
     ENGINE_OIL_TEMP = 0x0304 + 0x10000000 + 0x01000000
@@ -262,8 +262,8 @@
     /**
      * Engine rpm
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:RPM
      */
     ENGINE_RPM = 0x0305 + 0x10000000 + 0x01000000
@@ -300,8 +300,8 @@
      *
      * VehiclePropValue.timestamp must be correctly filled in.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      */
     WHEEL_TICK = 0x0306 + 0x10000000 + 0x01000000
             + 0x00510000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT64_VEC
@@ -310,8 +310,8 @@
      *
      * Value may not exceed INFO_FUEL_CAPACITY
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:MILLILITER
      */
     FUEL_LEVEL = 0x0307 + 0x10000000 + 0x01000000
@@ -319,8 +319,8 @@
     /**
      * Fuel door open
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     FUEL_DOOR_OPEN = 0x0308 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -329,8 +329,8 @@
      *
      * Value may not exceed INFO_EV_BATTERY_CAPACITY
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:WH
      */
     EV_BATTERY_LEVEL = 0x0309 + 0x10000000 + 0x01000000
@@ -338,16 +338,16 @@
     /**
      * EV charge port open
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     EV_CHARGE_PORT_OPEN = 0x030A + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
     /**
      * EV charge port connected
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     EV_CHARGE_PORT_CONNECTED = 0x030B + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -357,8 +357,8 @@
      * Positive value indicates battery is being charged.
      * Negative value indicates battery being discharged.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:MW
      */
     EV_BATTERY_INSTANTANEOUS_CHARGE_RATE = 0x030C + 0x10000000 + 0x01000000
@@ -370,8 +370,8 @@
      * all energy sources in a vehicle.  For example, a hybrid car's range will
      * be the sum of the ranges based on fuel and battery.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ_WRITE
      * @unit VehicleUnit:METER
      */
     RANGE_REMAINING = 0x0308 + 0x10000000 + 0x01000000
@@ -397,8 +397,8 @@
      *      }
      * },
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:KILOPASCAL
      */
     TIRE_PRESSURE = 0x0309 + 0x10000000 + 0x07000000
@@ -412,8 +412,8 @@
      * Minimum and maximum property values (that is, minFloatValue, maxFloatValue)
      * are not applicable to this property.
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:KILOPASCAL
      */
     CRITICALLY_LOW_TIRE_PRESSURE = 0x030A + 0x10000000 + 0x07000000
@@ -429,8 +429,8 @@
      * GEAR_1, GEAR_2,...} and for manual transmission the list must be
      * {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleGear
      */
     GEAR_SELECTION = 0x0400 + 0x10000000 + 0x01000000
@@ -448,8 +448,8 @@
      * {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the
      * same as that of the supported gears reported in GEAR_SELECTION.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleGear
      */
     CURRENT_GEAR = 0x0401 + 0x10000000 + 0x01000000
@@ -457,16 +457,16 @@
     /**
      * Parking brake state.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     PARKING_BRAKE_ON = 0x0402 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
     /**
      * Auto-apply parking brake.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     PARKING_BRAKE_AUTO_APPLY = 0x0403 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -483,8 +483,8 @@
      *   For a hybrid vehicle, this property may be based on the combination of gas and battery
      *      levels, at the OEM's discretion.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     FUEL_LEVEL_LOW = 0x0405 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -495,16 +495,16 @@
      * low light. The platform could use this, for example, to enable appropriate UI for
      * better viewing in dark or low light environments.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     NIGHT_MODE = 0x0407 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
     /**
      * State of the vehicles turn signals
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleTurnSignal
      */
     TURN_SIGNAL_STATE = 0x0408 + 0x10000000 + 0x01000000
@@ -512,8 +512,8 @@
     /**
      * Represents ignition state
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleIgnitionState
      */
     IGNITION_STATE = 0x0409 + 0x10000000 + 0x01000000
@@ -525,8 +525,8 @@
      * property may be intermittently set (pulsing) based on the real-time
      * state of the ABS system.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     ABS_ACTIVE = 0x040A + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -537,8 +537,8 @@
      * TC is off.  This property may be intermittently set (pulsing) based on
      * the real-time state of the TC system.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     TRACTION_CONTROL_ACTIVE = 0x040B + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -580,16 +580,16 @@
      *
      * Fan speed setting
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_FAN_SPEED = 0x0500 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
     /**
      * Fan direction setting
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleHvacFanDirection
      */
     HVAC_FAN_DIRECTION = 0x0501 + 0x10000000 + 0x05000000
@@ -597,8 +597,8 @@
     /**
      * HVAC current temperature.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:CELSIUS
      */
     HVAC_TEMPERATURE_CURRENT = 0x0502 + 0x10000000 + 0x05000000
@@ -624,8 +624,8 @@
      * that property to get the suggested value before setting HVAC_TEMPERATURE_SET. Otherwise,
      * the application may choose the value in HVAC_TEMPERATURE_SET configArray by itself.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @unit VehicleUnit:CELSIUS
      */
     HVAC_TEMPERATURE_SET = 0x0503 + 0x10000000 + 0x05000000
@@ -633,16 +633,16 @@
     /**
      * Fan-based defrost for designated window.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_DEFROSTER = 0x0504 + 0x10000000 + 0x03000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:WINDOW,VehiclePropertyType:BOOLEAN
     /**
      * On/off AC for designated areaId
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @config_flags Supported areaIds
      */
     HVAC_AC_ON = 0x0505 + 0x10000000 + 0x05000000
@@ -655,8 +655,8 @@
      * Any parameters modified as a side effect of turning on/off the MAX AC
      * parameter shall generate onPropertyEvent() callbacks to the VHAL.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_MAX_AC_ON = 0x0506 + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
@@ -674,8 +674,8 @@
      * areaConfig.areaId = {ROW_1_LEFT | ROW_1_RIGHT} indicates HVAC_MAX_DEFROST_ON
      * only can be controlled for the front rows.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_MAX_DEFROST_ON = 0x0507 + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
@@ -687,8 +687,8 @@
      * Recirc “off” means the majority of the airflow into the cabin is coming
      * from outside the car.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_RECIRC_ON = 0x0508 + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
@@ -722,16 +722,16 @@
      * onPropertyEvent() callbacks (i.e. HVAC_DUAL_ON = false,
      * HVAC_TEMPERATURE_SET[AreaID] = xxx, etc).
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_DUAL_ON = 0x0509 + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
     /**
      * On/off automatic mode
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_AUTO_ON = 0x050A + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
@@ -746,8 +746,8 @@
      * min/max range defines the allowable range and number of steps in each
      * direction.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_SEAT_TEMPERATURE = 0x050B + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -758,8 +758,8 @@
      * The Max value in the config data represents the highest heating level.
      * The Min value in the config data MUST be zero and indicates no heating.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_SIDE_MIRROR_HEAT = 0x050C + 0x10000000 + 0x04000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:MIRROR,VehiclePropertyType:INT32
@@ -772,8 +772,8 @@
      * Negative value indicates cooling.
      * 0 indicates temperature control is off.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_STEERING_WHEEL_HEAT = 0x050D + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
@@ -790,8 +790,8 @@
      * Values must be one of VehicleUnit::CELSIUS or VehicleUnit::FAHRENHEIT
      * Note that internally, all temperatures are represented in floating point Celsius.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleUnit
      */
     HVAC_TEMPERATURE_DISPLAY_UNITS = 0x050E + 0x10000000 + 0x01000000
@@ -799,8 +799,8 @@
     /**
      * Actual fan speed
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     HVAC_ACTUAL_FAN_SPEED_RPM = 0x050F + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -841,8 +841,8 @@
      *   - ROW_1_LEFT | ROW_1_RIGHT
      *   - ROW_2_LEFT | ROW_2_CENTER | ROW_2_RIGHT | ROW_3_LEFT | ROW_3_CENTER | ROW_3_RIGHT
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_POWER_ON = 0x0510 + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
@@ -859,8 +859,8 @@
      *   - FAN_DIRECTION_DEFROST (0x4)
      *   - FAN_DIRECTION_FLOOR | FAN_DIRECTION_DEFROST (0x6)
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleHvacFanDirection
      */
     HVAC_FAN_DIRECTION_AVAILABLE = 0x0511 + 0x10000000 + 0x05000000
@@ -872,8 +872,8 @@
      * switch to recirculation mode if the vehicle detects poor incoming air
      * quality.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_AUTO_RECIRC_ON = 0x0512 + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
@@ -887,16 +887,16 @@
      * ventilation.  This is different than seating cooling. It can be on at the
      * same time as cooling, or not.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_SEAT_VENTILATION = 0x0513 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
     /**
      * Electric defrosters' status
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_ELECTRIC_DEFROSTER_ON = 0x0514 + 0x10000000 + 0x03000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:WINDOW,VehiclePropertyType:BOOLEAN
@@ -935,8 +935,8 @@
      * callback with property value [21, (float)VehicleUnit:CELSIUS, 21.0, 70.0].
      * In this case, the application can know that the value is 70.0 Fahrenheit in the car’s UI.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     HVAC_TEMPERATURE_VALUE_SUGGESTION = 0x0515 + 0x10000000 + 0x01000000
             + 0x00610000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:FLOAT_VEC
@@ -951,8 +951,8 @@
      * For example: configArray[0] = METER
      *              configArray[1] = KILOMETER
      *              configArray[2] = MILE
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleUnit
      */
     DISTANCE_DISPLAY_UNITS = 0x0600 + 0x10000000 + 0x01000000
@@ -967,8 +967,8 @@
      * Volume units are defined in VehicleUnit.
      * For example: configArray[0] = LITER
      *              configArray[1] = GALLON
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleUnit
      */
     FUEL_VOLUME_DISPLAY_UNITS = 0x0601 + 0x10000000 + 0x01000000
@@ -984,8 +984,8 @@
      * For example: configArray[0] = KILOPASCAL
      *              configArray[1] = PSI
      *              configArray[2] = BAR
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleUnit
      */
     TIRE_PRESSURE_DISPLAY_UNITS = 0x0602 + 0x10000000 + 0x01000000
@@ -1001,8 +1001,8 @@
      * For example: configArray[0] = WATT_HOUR
      *              configArray[1] = AMPERE_HOURS
      *              configArray[2] = KILOWATT_HOUR
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleUnit
      */
     EV_BATTERY_DISPLAY_UNITS = 0x0603 + 0x10000000 + 0x01000000
@@ -1014,8 +1014,8 @@
      * True indicates units are distance over volume such as MPG.
      * False indicates units are volume over distance such as L/100KM.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME = 0x0604 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -1029,8 +1029,8 @@
      * For example: configArray[0] = METER_PER_SEC
      *              configArray[1] = MILES_PER_HOUR
      *              configArray[2] = KILOMETERS_PER_HOUR
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     VEHICLE_SPEED_DISPLAY_UNITS = 0x0605 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
@@ -1072,8 +1072,8 @@
      * WARNING: The value available through this property should not be dependent
      * on value written by Android to ANDROID_EPOCH_TIME property in any way.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_ONLY
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:MILLI_SECS
      */
     EXTERNAL_CAR_TIME = 0x0608 + 0x10000000 // VehiclePropertyGroup:SYSTEM
@@ -1101,8 +1101,8 @@
      *     drift = elapsedTime - PropValue.timestamp
      *     effectiveTime = PropValue.value.int64Values[0] + drift
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE_ONLY
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      * @unit VehicleUnit:MILLI_SECS
      */
     ANDROID_EPOCH_TIME = 0x0606 + 0x10000000 + 0x01000000
@@ -1116,16 +1116,16 @@
      * AAOS will then read the property on subsequent boots. The binding seed is expected to be
      * reliably persisted. Any loss of the seed results in a factory reset of the IVI.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     STORAGE_ENCRYPTION_BINDING_SEED = 0x0607 + 0x10000000 + 0x01000000
             + 0x00700000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BYTES
     /**
      * Outside temperature
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:CELSIUS
      */
     ENV_OUTSIDE_TEMPERATURE = 0x0703 + 0x10000000 + 0x01000000
@@ -1143,8 +1143,8 @@
      *   int32Values[1] : additional parameter relevant for each state,
      *                    0 if not used.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     AP_POWER_STATE_REQ = 0x0A00 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
@@ -1158,8 +1158,8 @@
      *   int32Values[1] : Time in ms to wake up, if necessary.  Otherwise 0.
 
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     AP_POWER_STATE_REPORT = 0x0A01 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
@@ -1172,8 +1172,8 @@
      *
      * int32Values[0] must be VehicleApPowerBootupReason.
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      */
     AP_POWER_BOOTUP_REASON = 0x0A02 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
@@ -1187,8 +1187,8 @@
      * change display brightness from Settings, but that must not be reflected
      * to other displays.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     DISPLAY_BRIGHTNESS = 0x0A03 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
@@ -1203,8 +1203,8 @@
      * int32Values[3] : [optional] Number of ticks. The value must be equal or
      *                  greater than 1. When omitted, Android will default to 1.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @config_flags
      */
     HW_KEY_INPUT = 0x0A10 + 0x10000000 + 0x01000000
@@ -1226,9 +1226,9 @@
      *                             detents is > 1 or < -1, this is when the
      *                             first detent of rotation occurred.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @data_enum RotaryInputType
-     * @access VehiclePropertyAccess:READ
+     * @access VehiclePropertyAccess.READ
      */
     HW_ROTARY_INPUT = 0x0A20 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
@@ -1249,9 +1249,9 @@
      * int32Values[2] : repeat counter, if 0 then event is not repeated. Values 1 or above means
      *                  how many times this event repeated.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @data_enum CustomInputType
-     * @access VehiclePropertyAccess:READ
+     * @access VehiclePropertyAccess.READ
      */
     HW_CUSTOM_INPUT = 0X0A30 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
@@ -1282,16 +1282,16 @@
      * Some vehicles (minivans) can open the door electronically.  Hence, the
      * ability to write this property.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     DOOR_POS = 0x0B00 + 0x10000000 + 0x06000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:DOOR,VehiclePropertyType:INT32
     /**
      * Door move
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     DOOR_MOVE = 0x0B01 + 0x10000000 + 0x06000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:DOOR,VehiclePropertyType:INT32
@@ -1300,8 +1300,8 @@
      *
      * 'true' indicates door is locked
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     DOOR_LOCK = 0x0B02 + 0x10000000 + 0x06000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:DOOR,VehiclePropertyType:BOOLEAN
@@ -1310,8 +1310,8 @@
      *
      * Positive value indicates tilt upwards, negative value is downwards
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     MIRROR_Z_POS = 0x0B40 + 0x10000000 + 0x04000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:MIRROR,VehiclePropertyType:INT32
@@ -1320,8 +1320,8 @@
      *
      * Positive value indicates tilt upwards, negative value is downwards
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     MIRROR_Z_MOVE = 0x0B41 + 0x10000000 + 0x04000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:MIRROR,VehiclePropertyType:INT32
@@ -1330,8 +1330,8 @@
      *
      * Positive value indicate tilt right, negative value is left
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     MIRROR_Y_POS = 0x0B42 + 0x10000000 + 0x04000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:MIRROR,VehiclePropertyType:INT32
@@ -1340,8 +1340,8 @@
      *
      * Positive value indicate tilt right, negative value is left
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     MIRROR_Y_MOVE = 0x0B43 + 0x10000000 + 0x04000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:MIRROR,VehiclePropertyType:INT32
@@ -1350,8 +1350,8 @@
      *
      * True indicates mirror positions are locked and not changeable
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     MIRROR_LOCK = 0x0B44 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -1360,8 +1360,8 @@
      *
      * True indicates mirrors are folded
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     MIRROR_FOLD = 0x0B45 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -1376,8 +1376,8 @@
      * will be 3. When the user wants to select a preset, the desired preset
      * number (1, 2, or 3) is set.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     SEAT_MEMORY_SELECT = 0x0B80 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1388,8 +1388,8 @@
      * into the selected preset slot.  The maxValue for each seat position
      * must match the maxValue for SEAT_MEMORY_SELECT.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     SEAT_MEMORY_SET = 0x0B81 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1401,8 +1401,8 @@
      * Write access indicates automatic seat buckling capabilities.  There are
      * no known cars at this time, but you never know...
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_BELT_BUCKLED = 0x0B82 + 0x10000000 + 0x05000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:BOOLEAN
@@ -1413,16 +1413,16 @@
      * Max value indicates highest position
      * Min value indicates lowest position
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_BELT_HEIGHT_POS = 0x0B83 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
     /**
      * Seatbelt height move
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_BELT_HEIGHT_MOVE = 0x0B84 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1433,8 +1433,8 @@
      * Max value indicates closest to wheel, min value indicates most rearward
      * position.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_FORE_AFT_POS = 0x0B85 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1443,8 +1443,8 @@
      *
      * Moves the seat position forward and aft.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_FORE_AFT_MOVE = 0x0B86 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1455,8 +1455,8 @@
      * Max value indicates angling forward towards the steering wheel.
      * Min value indicates full recline.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_BACKREST_ANGLE_1_POS = 0x0B87 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1465,8 +1465,8 @@
      *
      * Moves the backrest forward or recline.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_BACKREST_ANGLE_1_MOVE = 0x0B88 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1477,8 +1477,8 @@
      * Max value indicates angling forward towards the steering wheel.
      * Min value indicates full recline.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_BACKREST_ANGLE_2_POS = 0x0B89 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1487,8 +1487,8 @@
      *
      * Moves the backrest forward or recline.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_BACKREST_ANGLE_2_MOVE = 0x0B8A + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1499,8 +1499,8 @@
      * Max value indicates highest position.
      * Min value indicates lowest position.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEIGHT_POS = 0x0B8B + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1509,8 +1509,8 @@
      *
      * Moves the seat height.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEIGHT_MOVE = 0x0B8C + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1521,8 +1521,8 @@
      * Max value indicates longest depth position.
      * Min value indicates shortest position.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_DEPTH_POS = 0x0B8D + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1531,8 +1531,8 @@
      *
      * Adjusts the seat depth.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_DEPTH_MOVE = 0x0B8E + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1543,8 +1543,8 @@
      * Max value indicates front edge of seat higher than back edge.
      * Min value indicates front edge of seat lower than back edge.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_TILT_POS = 0x0B8F + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1553,8 +1553,8 @@
      *
      * Tilts the seat.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_TILT_MOVE = 0x0B90 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1565,8 +1565,8 @@
      * Max value indicates most forward position.
      * Min value indicates most rearward position.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_LUMBAR_FORE_AFT_POS = 0x0B91 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1575,8 +1575,8 @@
      *
      * Adjusts the lumbar support.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_LUMBAR_FORE_AFT_MOVE = 0x0B92 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1587,8 +1587,8 @@
      * Max value indicates widest lumbar setting (i.e. least support)
      * Min value indicates thinnest lumbar setting.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_LUMBAR_SIDE_SUPPORT_POS = 0x0B93 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1597,8 +1597,8 @@
      *
      * Adjusts the amount of lateral lumbar support.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_LUMBAR_SIDE_SUPPORT_MOVE = 0x0B94 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1609,8 +1609,8 @@
      * Max value indicates tallest setting.
      * Min value indicates shortest setting.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEADREST_HEIGHT_POS = 0x0B95 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
@@ -1619,8 +1619,8 @@
      *
      * Moves the headrest up and down.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEADREST_HEIGHT_MOVE = 0x0B96 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1631,8 +1631,8 @@
      * Max value indicates most upright angle.
      * Min value indicates shallowest headrest angle.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEADREST_ANGLE_POS = 0x0B97 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1641,8 +1641,8 @@
      *
      * Adjusts the angle of the headrest
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEADREST_ANGLE_MOVE = 0x0B98 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1653,16 +1653,16 @@
      * Max value indicates position closest to front of car.
      * Min value indicates position closest to rear of car.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEADREST_FORE_AFT_POS = 0x0B99 + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
     /**
      * Headrest fore/aft move
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SEAT_HEADREST_FORE_AFT_MOVE = 0x0B9A + 0x10000000 + 0x05000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:SEAT,VehiclePropertyType:INT32
@@ -1672,8 +1672,8 @@
      * Indicates whether a particular seat is occupied or not, to the best of the car's ability
      * to determine. Valid values are from the VehicleSeatOccupancyState enum.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleSeatOccupancyState
      */
     SEAT_OCCUPANCY = 0x0BB0 + 0x10000000 + 0x05000000
@@ -1692,8 +1692,8 @@
      *
      *  Note that in this mode, 0 indicates the window is closed.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     WINDOW_POS = 0x0BC0 + 0x10000000 + 0x03000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:WINDOW,VehiclePropertyType:INT32
@@ -1720,8 +1720,8 @@
      *   Max = open the sunroof, automatically stop when sunroof is fully open.
      *   Min = open the vent, automatically stop when vent is fully open.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     WINDOW_MOVE = 0x0BC1 + 0x10000000 + 0x03000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:WINDOW,VehiclePropertyType:INT32
@@ -1730,8 +1730,8 @@
      *
      * True indicates windows are locked and can't be moved.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     WINDOW_LOCK = 0x0BC4 + 0x10000000 + 0x03000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:WINDOW,VehiclePropertyType:BOOLEAN
@@ -1748,8 +1748,8 @@
      *
      * IVehicle#get must always return StatusCode::NOT_AVAILABLE.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     VEHICLE_MAP_SERVICE = 0x0C00 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -1791,8 +1791,8 @@
      *   floatValues[4 and 5] are valid sensor values
      *   floatValues[6] is not a valid sensor value
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     OBD2_LIVE_FRAME = 0x0D00 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -1817,8 +1817,8 @@
      * freeze frames, it is possible for a frame request to respond with NOT_AVAILABLE even if
      * the associated timestamp has been recently obtained via OBD2_FREEZE_FRAME_INFO.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     OBD2_FREEZE_FRAME = 0x0D01 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -1834,8 +1834,8 @@
      * such element can be used as the key to OBD2_FREEZE_FRAME to retrieve
      * the corresponding freeze frame.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     OBD2_FREEZE_FRAME_INFO = 0x0D02 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -1856,8 +1856,8 @@
      *   vehicle not support selective clearing of freeze frames, this latter mode must
      *   return NOT_AVAILABLE.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     OBD2_FREEZE_FRAME_CLEAR = 0x0D03 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -1866,8 +1866,8 @@
      *
      * Return the current state of headlights.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     HEADLIGHTS_STATE = 0x0E00 + 0x10000000 + 0x01000000
@@ -1877,8 +1877,8 @@
      *
      * Return the current state of high beam lights.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     HIGH_BEAM_LIGHTS_STATE = 0x0E01 + 0x10000000 + 0x01000000
@@ -1904,8 +1904,8 @@
      * Only one of FOG_LIGHTS_STATE or REAR_FOG_LIGHTS_STATE must be implemented and not both.
      * FRONT_FOG_LIGHTS_STATE must not be implemented.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     FOG_LIGHTS_STATE = 0x0E02 + 0x10000000 + 0x01000000
@@ -1915,8 +1915,8 @@
      *
      * Return the current status of hazard lights.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     HAZARD_LIGHTS_STATE = 0x0E03 + 0x10000000 + 0x01000000
@@ -1926,8 +1926,8 @@
      *
      * The setting that the user wants.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     HEADLIGHTS_SWITCH = 0x0E10 + 0x10000000 + 0x01000000
@@ -1937,8 +1937,8 @@
      *
      * The setting that the user wants.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     HIGH_BEAM_LIGHTS_SWITCH = 0x0E11 + 0x10000000 + 0x01000000
@@ -1964,8 +1964,8 @@
      * Only one of FOG_LIGHTS_SWITCH or REAR_FOG_LIGHTS_SWITCH must be implemented and not both.
      * FRONT_FOG_LIGHTS_SWITCH must not be implemented.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     FOG_LIGHTS_SWITCH = 0x0E12 + 0x10000000 + 0x01000000
@@ -1975,8 +1975,8 @@
      *
      * The setting that the user wants.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     HAZARD_LIGHTS_SWITCH = 0x0E13 + 0x10000000 + 0x01000000
@@ -1986,8 +1986,8 @@
      *
      * Return current status of cabin lights.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     CABIN_LIGHTS_STATE = 0x0F01 + 0x10000000 + 0x01000000
@@ -2000,8 +2000,8 @@
      * is open or because of a voice command.
      * For example, while the switch is in the "off" or "automatic" position.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     CABIN_LIGHTS_SWITCH = 0x0F02 + 0x10000000 + 0x01000000
@@ -2011,8 +2011,8 @@
      *
      * Return current status of reading lights.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     READING_LIGHTS_STATE = 0x0F03 + 0x10000000 + 0x05000000
@@ -2025,8 +2025,8 @@
      * is open or because of a voice command.
      * For example, while the switch is in the "off" or "automatic" position.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     READING_LIGHTS_SWITCH = 0x0F04 + 0x10000000 + 0x05000000
@@ -2054,8 +2054,8 @@
      * If vendor chose PERMISSION_NOT_ACCESSIBLE, android will not have access to the property. In
      * the example, Android can not write value for vendor_prop_2.
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      */
     SUPPORT_CUSTOMIZE_VENDOR_PERMISSION = 0x0F05 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -2070,8 +2070,8 @@
      *
      * Value read should include all features disabled with ',' separation.
      * ex) "com.android.car.user.CarUserNoticeService,storage_monitoring"
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      */
     DISABLED_OPTIONAL_FEATURES = 0x0F06 + 0x10000000 + 0x01000000
             + 0x00100000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:STRING
@@ -2120,8 +2120,8 @@
      * by the Android System). But if it supports user management, then it must support all core
      * user-related properties (INITIAL_USER_INFO, SWITCH_USER, CREATE_USER, and REMOVE_USER).
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     INITIAL_USER_INFO = 0x0F07 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -2286,8 +2286,8 @@
      *
      * Example: see VEHICLE_REQUEST section above.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     SWITCH_USER = 0x0F08 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -2332,8 +2332,8 @@
      * string: "D'OH!" // The meaning is a blackbox - it's passed to the caller (like Settings UI),
      *                 // which in turn can take the proper action.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     CREATE_USER = 0x0F09 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -2363,8 +2363,8 @@
      * int32[8]: 10  // 2nd user (user 10)
      * int32[9]: 0   // 2nd user flags (none)
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.WRITE
      */
     REMOVE_USER = 0x0F0A + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -2438,8 +2438,8 @@
      * int32[5]: 101 (2nd type: UserIdentificationAssociationType::CUSTOM_1)
      * int32[6]: 1   (2nd value: UserIdentificationAssociationValue::ASSOCIATE_CURRENT_USER)
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     USER_IDENTIFICATION_ASSOCIATION = 0x0F0B + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -2457,8 +2457,8 @@
      * For example, to enable rear view EVS service, android side can set the property value as
      * [EvsServiceType::REAR_VIEW, EvsServiceState::ON].
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     EVS_SERVICE_REQUEST = 0x0F10 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
@@ -2473,8 +2473,8 @@
      *
      *   string: "sample_policy_id" // power policy ID
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     POWER_POLICY_REQ = 0x0F21 + 0x10000000 + 0x01000000
             + 0x00100000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:STRING
@@ -2492,8 +2492,8 @@
      *
      *   string: "sample_policy_group_id" // power policy group ID
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     POWER_POLICY_GROUP_REQ = 0x0F22 + 0x10000000 + 0x01000000
             + 0x00100000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:STRING
@@ -2504,8 +2504,8 @@
      *
      *   string: "sample_policy_id" // power policy ID
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     CURRENT_POWER_POLICY = 0x0F23 + 0x10000000 + 0x01000000
             + 0x00100000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:STRING
@@ -2515,8 +2515,8 @@
      * Car watchdog sets this property to system uptime in milliseconds at every 3 second.
      * During the boot, the update may take longer time.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     WATCHDOG_ALIVE = 0xF31 + 0x10000000 + 0x01000000
             + 0x00500000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT64
@@ -2526,8 +2526,8 @@
      *   int32Values[0]: 1         // ProcessTerminationReason showing why a process is terminated.
      *   string: "/system/bin/log" // Process execution command.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     WATCHDOG_TERMINATED_PROCESS = 0x0F32 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -2541,8 +2541,8 @@
      * VHAL unhealthy and terminates it.
      * If this property is not supported by VHAL, car watchdog doesn't check VHAL health status.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     VHAL_HEARTBEAT = 0x0F33 + 0x10000000 + 0x01000000
             + 0x00500000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT64
@@ -2554,8 +2554,8 @@
      *        the default UI and a kind of launcher functionality for cluster display.
      *    the other values are followed by OEM's definition.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     CLUSTER_SWITCH_UI = 0x0F34 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
@@ -2578,8 +2578,8 @@
      * int32[7]: Inset - right:  same format with 'left'
      * int32[8]: Inset - bottom: same format with 'left'
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      */
     CLUSTER_DISPLAY_STATE = 0x0F35 + 0x10000000 + 0x01000000
             + 0x00410000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32_VEC
@@ -2613,8 +2613,8 @@
      *     and it only supports CALL UI only when the cellular network is available. Then, if the
      *     nework is avaibale, it'll send [1 1 1], and if it's out of network, it'll send [1 1 0].
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     CLUSTER_REPORT_STATE = 0x0F36 + 0x10000000 + 0x01000000
             + 0x00e00000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:MIXED
@@ -2627,8 +2627,8 @@
      *
      * int32: the type of ClusterUI to show
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     CLUSTER_REQUEST_DISPLAY = 0x0F37 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
@@ -2637,8 +2637,8 @@
      *
      * bytes: the serialized message of NavigationStateProto.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.WRITE
      */
     CLUSTER_NAVIGATION_STATE = 0x0F38 + 0x10000000 + 0x01000000
             + 0x00700000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BYTES
@@ -2649,8 +2649,8 @@
      * If the head unit is aware of an ETC card attached to the vehicle, this property should
      * return the type of card attached; otherwise, this property should be UNAVAILABLE.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum ElectronicTollCollectionCardType
      */
     ELECTRONIC_TOLL_COLLECTION_CARD_TYPE = 0x0F39 + 0x10000000 + 0x01000000
@@ -2663,8 +2663,8 @@
      * ELECTRONIC_TOLL_COLLECTION_CARD_TYPE gives that status of the card; otherwise,
      * this property should be UNAVAILABLE.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum ElectronicTollCollectionCardStatus
      */
     ELECTRONIC_TOLL_COLLECTION_CARD_STATUS = 0x0F3A + 0x10000000 + 0x01000000
@@ -2676,8 +2676,8 @@
      * Only one of FOG_LIGHTS_STATE or FRONT_FOG_LIGHTS_STATE must be implemented. Please refer to
      * the documentation on FOG_LIGHTS_STATE for more information.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     FRONT_FOG_LIGHTS_STATE = 0x0F3B + 0x10000000 + 0x01000000
@@ -2690,8 +2690,8 @@
      * Only one of FOG_LIGHTS_SWITCH or FRONT_FOG_LIGHTS_SWITCH must be implemented. Please refer to
      * the documentation on FOG_LIGHTS_SWITCH for more information.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     FRONT_FOG_LIGHTS_SWITCH = 0x0F3C + 0x10000000 + 0x01000000
@@ -2704,8 +2704,8 @@
      * Only one of FOG_LIGHTS_STATE or REAR_FOG_LIGHTS_STATE must be implemented. Please refer to
      * the documentation on FOG_LIGHTS_STATE for more information.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
      */
     REAR_FOG_LIGHTS_STATE = 0x0F3D + 0x10000000 + 0x01000000
@@ -2718,8 +2718,8 @@
      * Only one of FOG_LIGHTS_SWITCH or REAR_FOG_LIGHTS_SWITCH must be implemented. Please refer to
      * the documentation on FOG_LIGHTS_SWITCH for more information.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @data_enum VehicleLightSwitch
      */
     REAR_FOG_LIGHTS_SWITCH = 0x0F3E + 0x10000000 + 0x01000000
@@ -2731,8 +2731,8 @@
      * configArray[0] is used to specify the max current draw allowed by
      * the vehicle in Amperes.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      * @unit VehicleUnit:AMPERE
      */
     EV_CHARGE_CURRENT_DRAW_LIMIT = 0x0F3F + 0x10000000 + 0x01000000
@@ -2749,8 +2749,8 @@
      *   then the configArray should be {20, 40, 60, 80, 100}
      * If the configArray is empty then all values from 0 to 100 must be valid.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     EV_CHARGE_PERCENT_LIMIT = 0x0F40 + 0x10000000 + 0x01000000
             + 0x00600000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:FLOAT
@@ -2760,8 +2760,8 @@
      *
      * Returns the current charging state of the car.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum EvChargeState
      */
     EV_CHARGE_STATE = 0x0F41 + 0x10000000 + 0x01000000
@@ -2773,8 +2773,8 @@
      * The setting that the user wants. Setting this property to true starts the battery charging
      * and setting to false stops charging.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ_WRITE
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ_WRITE
      */
     EV_CHARGE_SWITCH = 0x0F42 + 0x10000000 + 0x01000000
             + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
@@ -2784,8 +2784,8 @@
      *
      * Returns 0 if the vehicle is not charging.
      *
-     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.CONTINUOUS
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:SECS
      */
     EV_CHARGE_TIME_REMAINING = 0x0F43 + 0x10000000 + 0x01000000
@@ -2797,8 +2797,8 @@
      * Returns the current state associated with the regenerative braking
      * setting in the car
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum EvRegenerativeBrakingState
      */
     EV_REGENERATIVE_BRAKING_STATE = 0x0F44 + 0x10000000 + 0x01000000
@@ -2809,8 +2809,8 @@
      *
      * Returns the trailer state of the car.
      *
-     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.ON_CHANGE
+     * @access VehiclePropertyAccess.READ
      * @data_enum TrailerState
      */
     TRAILER_PRESENT = 0x0F45 + 0x10000000 + 0x01000000
@@ -2832,12 +2832,25 @@
      * engine fluids, fuel, accessories, driver, passengers and cargo but excluding
      * that of any trailers.
      *
-     * @change_mode VehiclePropertyChangeMode:STATIC
-     * @access VehiclePropertyAccess:READ
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit:KILOGRAM
      */
 
     VEHICLE_CURB_WEIGHT = 0x0F46 + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
 
+    /**
+     * EU's General security regulation compliance requirement.
+     *
+     * Returns whether general security regulation compliance is required, if
+     * so, what type of requirement.
+     *
+     * @change_mode VehiclePropertyChangeMode.STATIC
+     * @access VehiclePropertyAccess.READ
+     * @data_enum GsrComplianceRequirementType
+     */
+    GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT = 0x0F47 + 0x10000000 + 0x01000000
+            + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
+
 }
diff --git a/automotive/vehicle/aidl/generated_lib/cpp/AccessForVehicleProperty.h b/automotive/vehicle/aidl/generated_lib/cpp/AccessForVehicleProperty.h
new file mode 100644
index 0000000..14a694d
--- /dev/null
+++ b/automotive/vehicle/aidl/generated_lib/cpp/AccessForVehicleProperty.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * DO NOT EDIT MANUALLY!!!
+ *
+ * Generated by tools/generate_annotation_enums.py.
+ */
+
+#ifndef android_hardware_automotive_vehicle_aidl_generated_lib_AccessForVehicleProperty_H_
+#define android_hardware_automotive_vehicle_aidl_generated_lib_AccessForVehicleProperty_H_
+
+#include <aidl/android/hardware/automotive/vehicle/VehicleProperty.h>
+#include <aidl/android/hardware/automotive/vehicle/VehiclePropertyAccess.h>
+
+#include <unordered_map>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace automotive {
+namespace vehicle {
+
+std::unordered_map<VehicleProperty, VehiclePropertyAccess> AccessForVehicleProperty = {
+        {VehicleProperty::INFO_VIN, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_MAKE, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_MODEL, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_MODEL_YEAR, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_FUEL_CAPACITY, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_FUEL_TYPE, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_EV_BATTERY_CAPACITY, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_EV_CONNECTOR_TYPE, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_FUEL_DOOR_LOCATION, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_EV_PORT_LOCATION, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_DRIVER_SEAT, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_EXTERIOR_DIMENSIONS, VehiclePropertyAccess::READ},
+        {VehicleProperty::INFO_MULTI_EV_PORT_LOCATIONS, VehiclePropertyAccess::READ},
+        {VehicleProperty::PERF_ODOMETER, VehiclePropertyAccess::READ},
+        {VehicleProperty::PERF_VEHICLE_SPEED, VehiclePropertyAccess::READ},
+        {VehicleProperty::PERF_VEHICLE_SPEED_DISPLAY, VehiclePropertyAccess::READ},
+        {VehicleProperty::PERF_STEERING_ANGLE, VehiclePropertyAccess::READ},
+        {VehicleProperty::PERF_REAR_STEERING_ANGLE, VehiclePropertyAccess::READ},
+        {VehicleProperty::ENGINE_COOLANT_TEMP, VehiclePropertyAccess::READ},
+        {VehicleProperty::ENGINE_OIL_LEVEL, VehiclePropertyAccess::READ},
+        {VehicleProperty::ENGINE_OIL_TEMP, VehiclePropertyAccess::READ},
+        {VehicleProperty::ENGINE_RPM, VehiclePropertyAccess::READ},
+        {VehicleProperty::WHEEL_TICK, VehiclePropertyAccess::READ},
+        {VehicleProperty::FUEL_LEVEL, VehiclePropertyAccess::READ},
+        {VehicleProperty::FUEL_DOOR_OPEN, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EV_BATTERY_LEVEL, VehiclePropertyAccess::READ},
+        {VehicleProperty::EV_CHARGE_PORT_OPEN, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EV_CHARGE_PORT_CONNECTED, VehiclePropertyAccess::READ},
+        {VehicleProperty::EV_BATTERY_INSTANTANEOUS_CHARGE_RATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::RANGE_REMAINING, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::TIRE_PRESSURE, VehiclePropertyAccess::READ},
+        {VehicleProperty::CRITICALLY_LOW_TIRE_PRESSURE, VehiclePropertyAccess::READ},
+        {VehicleProperty::GEAR_SELECTION, VehiclePropertyAccess::READ},
+        {VehicleProperty::CURRENT_GEAR, VehiclePropertyAccess::READ},
+        {VehicleProperty::PARKING_BRAKE_ON, VehiclePropertyAccess::READ},
+        {VehicleProperty::PARKING_BRAKE_AUTO_APPLY, VehiclePropertyAccess::READ},
+        {VehicleProperty::FUEL_LEVEL_LOW, VehiclePropertyAccess::READ},
+        {VehicleProperty::NIGHT_MODE, VehiclePropertyAccess::READ},
+        {VehicleProperty::TURN_SIGNAL_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::IGNITION_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::ABS_ACTIVE, VehiclePropertyAccess::READ},
+        {VehicleProperty::TRACTION_CONTROL_ACTIVE, VehiclePropertyAccess::READ},
+        {VehicleProperty::HVAC_FAN_SPEED, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_FAN_DIRECTION, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_TEMPERATURE_CURRENT, VehiclePropertyAccess::READ},
+        {VehicleProperty::HVAC_TEMPERATURE_SET, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_DEFROSTER, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_AC_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_MAX_AC_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_MAX_DEFROST_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_RECIRC_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_DUAL_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_AUTO_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_SEAT_TEMPERATURE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_SIDE_MIRROR_HEAT, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_STEERING_WHEEL_HEAT, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_TEMPERATURE_DISPLAY_UNITS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_ACTUAL_FAN_SPEED_RPM, VehiclePropertyAccess::READ},
+        {VehicleProperty::HVAC_POWER_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_FAN_DIRECTION_AVAILABLE, VehiclePropertyAccess::READ},
+        {VehicleProperty::HVAC_AUTO_RECIRC_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_SEAT_VENTILATION, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_ELECTRIC_DEFROSTER_ON, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HVAC_TEMPERATURE_VALUE_SUGGESTION, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::DISTANCE_DISPLAY_UNITS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::FUEL_VOLUME_DISPLAY_UNITS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::TIRE_PRESSURE_DISPLAY_UNITS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EV_BATTERY_DISPLAY_UNITS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::VEHICLE_SPEED_DISPLAY_UNITS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EXTERNAL_CAR_TIME, VehiclePropertyAccess::READ},
+        {VehicleProperty::ANDROID_EPOCH_TIME, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::STORAGE_ENCRYPTION_BINDING_SEED, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::ENV_OUTSIDE_TEMPERATURE, VehiclePropertyAccess::READ},
+        {VehicleProperty::AP_POWER_STATE_REQ, VehiclePropertyAccess::READ},
+        {VehicleProperty::AP_POWER_STATE_REPORT, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::AP_POWER_BOOTUP_REASON, VehiclePropertyAccess::READ},
+        {VehicleProperty::DISPLAY_BRIGHTNESS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HW_KEY_INPUT, VehiclePropertyAccess::READ},
+        {VehicleProperty::HW_ROTARY_INPUT, VehiclePropertyAccess::READ},
+        {VehicleProperty::HW_CUSTOM_INPUT, VehiclePropertyAccess::READ},
+        {VehicleProperty::DOOR_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::DOOR_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::DOOR_LOCK, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::MIRROR_Z_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::MIRROR_Z_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::MIRROR_Y_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::MIRROR_Y_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::MIRROR_LOCK, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::MIRROR_FOLD, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_MEMORY_SELECT, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::SEAT_MEMORY_SET, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::SEAT_BELT_BUCKLED, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_BELT_HEIGHT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_BELT_HEIGHT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_FORE_AFT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_FORE_AFT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_1_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_1_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_2_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_2_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEIGHT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEIGHT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_DEPTH_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_DEPTH_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_TILT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_TILT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_LUMBAR_FORE_AFT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_LUMBAR_FORE_AFT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_LUMBAR_SIDE_SUPPORT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_LUMBAR_SIDE_SUPPORT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEADREST_HEIGHT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEADREST_HEIGHT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEADREST_ANGLE_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEADREST_ANGLE_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEADREST_FORE_AFT_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_HEADREST_FORE_AFT_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SEAT_OCCUPANCY, VehiclePropertyAccess::READ},
+        {VehicleProperty::WINDOW_POS, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::WINDOW_MOVE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::WINDOW_LOCK, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::VEHICLE_MAP_SERVICE, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::OBD2_LIVE_FRAME, VehiclePropertyAccess::READ},
+        {VehicleProperty::OBD2_FREEZE_FRAME, VehiclePropertyAccess::READ},
+        {VehicleProperty::OBD2_FREEZE_FRAME_INFO, VehiclePropertyAccess::READ},
+        {VehicleProperty::OBD2_FREEZE_FRAME_CLEAR, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::HEADLIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::HIGH_BEAM_LIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::FOG_LIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::HAZARD_LIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::HEADLIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HIGH_BEAM_LIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::FOG_LIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::HAZARD_LIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::CABIN_LIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::CABIN_LIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::READING_LIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::READING_LIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SUPPORT_CUSTOMIZE_VENDOR_PERMISSION, VehiclePropertyAccess::READ},
+        {VehicleProperty::DISABLED_OPTIONAL_FEATURES, VehiclePropertyAccess::READ},
+        {VehicleProperty::INITIAL_USER_INFO, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::SWITCH_USER, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::CREATE_USER, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::REMOVE_USER, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::USER_IDENTIFICATION_ASSOCIATION, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EVS_SERVICE_REQUEST, VehiclePropertyAccess::READ},
+        {VehicleProperty::POWER_POLICY_REQ, VehiclePropertyAccess::READ},
+        {VehicleProperty::POWER_POLICY_GROUP_REQ, VehiclePropertyAccess::READ},
+        {VehicleProperty::CURRENT_POWER_POLICY, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::WATCHDOG_ALIVE, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::WATCHDOG_TERMINATED_PROCESS, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::VHAL_HEARTBEAT, VehiclePropertyAccess::READ},
+        {VehicleProperty::CLUSTER_SWITCH_UI, VehiclePropertyAccess::READ},
+        {VehicleProperty::CLUSTER_DISPLAY_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::CLUSTER_REPORT_STATE, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::CLUSTER_REQUEST_DISPLAY, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::CLUSTER_NAVIGATION_STATE, VehiclePropertyAccess::WRITE},
+        {VehicleProperty::ELECTRONIC_TOLL_COLLECTION_CARD_TYPE, VehiclePropertyAccess::READ},
+        {VehicleProperty::ELECTRONIC_TOLL_COLLECTION_CARD_STATUS, VehiclePropertyAccess::READ},
+        {VehicleProperty::FRONT_FOG_LIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::FRONT_FOG_LIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::REAR_FOG_LIGHTS_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::REAR_FOG_LIGHTS_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EV_CHARGE_CURRENT_DRAW_LIMIT, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EV_CHARGE_PERCENT_LIMIT, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EV_CHARGE_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::EV_CHARGE_SWITCH, VehiclePropertyAccess::READ_WRITE},
+        {VehicleProperty::EV_CHARGE_TIME_REMAINING, VehiclePropertyAccess::READ},
+        {VehicleProperty::EV_REGENERATIVE_BRAKING_STATE, VehiclePropertyAccess::READ},
+        {VehicleProperty::TRAILER_PRESENT, VehiclePropertyAccess::READ},
+        {VehicleProperty::VEHICLE_CURB_WEIGHT, VehiclePropertyAccess::READ},
+        {VehicleProperty::GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT, VehiclePropertyAccess::READ},
+};
+
+}  // namespace vehicle
+}  // namespace automotive
+}  // namespace hardware
+}  // namespace android
+}  // aidl
+
+#endif  // android_hardware_automotive_vehicle_aidl_generated_lib_AccessForVehicleProperty_H_
diff --git a/automotive/vehicle/aidl/generated_lib/cpp/Android.bp b/automotive/vehicle/aidl/generated_lib/cpp/Android.bp
new file mode 100644
index 0000000..11d3693
--- /dev/null
+++ b/automotive/vehicle/aidl/generated_lib/cpp/Android.bp
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+cc_library_headers {
+    name: "IVehicleGeneratedHeaders",
+    vendor_available: true,
+    local_include_dirs: ["."],
+    export_include_dirs: ["."],
+    defaults: ["VehicleHalInterfaceDefaults"],
+}
diff --git a/automotive/vehicle/aidl/generated_lib/cpp/ChangeModeForVehicleProperty.h b/automotive/vehicle/aidl/generated_lib/cpp/ChangeModeForVehicleProperty.h
new file mode 100644
index 0000000..c0416af
--- /dev/null
+++ b/automotive/vehicle/aidl/generated_lib/cpp/ChangeModeForVehicleProperty.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * DO NOT EDIT MANUALLY!!!
+ *
+ * Generated by tools/generate_annotation_enums.py.
+ */
+
+#ifndef android_hardware_automotive_vehicle_aidl_generated_lib_ChangeModeForVehicleProperty_H_
+#define android_hardware_automotive_vehicle_aidl_generated_lib_ChangeModeForVehicleProperty_H_
+
+#include <aidl/android/hardware/automotive/vehicle/VehicleProperty.h>
+#include <aidl/android/hardware/automotive/vehicle/VehiclePropertyChangeMode.h>
+
+#include <unordered_map>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace automotive {
+namespace vehicle {
+
+std::unordered_map<VehicleProperty, VehiclePropertyChangeMode> ChangeModeForVehicleProperty = {
+        {VehicleProperty::INFO_VIN, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_MAKE, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_MODEL, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_MODEL_YEAR, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_FUEL_CAPACITY, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_FUEL_TYPE, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_EV_BATTERY_CAPACITY, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_EV_CONNECTOR_TYPE, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_FUEL_DOOR_LOCATION, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_EV_PORT_LOCATION, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_DRIVER_SEAT, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_EXTERIOR_DIMENSIONS, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INFO_MULTI_EV_PORT_LOCATIONS, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::PERF_ODOMETER, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::PERF_VEHICLE_SPEED, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::PERF_VEHICLE_SPEED_DISPLAY, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::PERF_STEERING_ANGLE, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::PERF_REAR_STEERING_ANGLE, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::ENGINE_COOLANT_TEMP, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::ENGINE_OIL_LEVEL, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::ENGINE_OIL_TEMP, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::ENGINE_RPM, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::WHEEL_TICK, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::FUEL_LEVEL, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::FUEL_DOOR_OPEN, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_BATTERY_LEVEL, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::EV_CHARGE_PORT_OPEN, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_CHARGE_PORT_CONNECTED, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_BATTERY_INSTANTANEOUS_CHARGE_RATE, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::RANGE_REMAINING, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::TIRE_PRESSURE, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::CRITICALLY_LOW_TIRE_PRESSURE, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::GEAR_SELECTION, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CURRENT_GEAR, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::PARKING_BRAKE_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::PARKING_BRAKE_AUTO_APPLY, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::FUEL_LEVEL_LOW, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::NIGHT_MODE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::TURN_SIGNAL_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::IGNITION_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::ABS_ACTIVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::TRACTION_CONTROL_ACTIVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_FAN_SPEED, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_FAN_DIRECTION, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_TEMPERATURE_CURRENT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_TEMPERATURE_SET, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_DEFROSTER, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_AC_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_MAX_AC_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_MAX_DEFROST_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_RECIRC_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_DUAL_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_AUTO_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_SEAT_TEMPERATURE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_SIDE_MIRROR_HEAT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_STEERING_WHEEL_HEAT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_TEMPERATURE_DISPLAY_UNITS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_ACTUAL_FAN_SPEED_RPM, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_POWER_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_FAN_DIRECTION_AVAILABLE, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::HVAC_AUTO_RECIRC_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_SEAT_VENTILATION, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_ELECTRIC_DEFROSTER_ON, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HVAC_TEMPERATURE_VALUE_SUGGESTION, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::DISTANCE_DISPLAY_UNITS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::FUEL_VOLUME_DISPLAY_UNITS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::TIRE_PRESSURE_DISPLAY_UNITS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_BATTERY_DISPLAY_UNITS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::VEHICLE_SPEED_DISPLAY_UNITS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EXTERNAL_CAR_TIME, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::ANDROID_EPOCH_TIME, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::STORAGE_ENCRYPTION_BINDING_SEED, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::ENV_OUTSIDE_TEMPERATURE, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::AP_POWER_STATE_REQ, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::AP_POWER_STATE_REPORT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::AP_POWER_BOOTUP_REASON, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::DISPLAY_BRIGHTNESS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HW_KEY_INPUT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HW_ROTARY_INPUT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HW_CUSTOM_INPUT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::DOOR_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::DOOR_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::DOOR_LOCK, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::MIRROR_Z_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::MIRROR_Z_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::MIRROR_Y_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::MIRROR_Y_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::MIRROR_LOCK, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::MIRROR_FOLD, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_MEMORY_SELECT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_MEMORY_SET, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_BELT_BUCKLED, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_BELT_HEIGHT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_BELT_HEIGHT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_FORE_AFT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_FORE_AFT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_1_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_1_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_2_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_BACKREST_ANGLE_2_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEIGHT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEIGHT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_DEPTH_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_DEPTH_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_TILT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_TILT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_LUMBAR_FORE_AFT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_LUMBAR_FORE_AFT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_LUMBAR_SIDE_SUPPORT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_LUMBAR_SIDE_SUPPORT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEADREST_HEIGHT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEADREST_HEIGHT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEADREST_ANGLE_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEADREST_ANGLE_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEADREST_FORE_AFT_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_HEADREST_FORE_AFT_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SEAT_OCCUPANCY, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::WINDOW_POS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::WINDOW_MOVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::WINDOW_LOCK, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::VEHICLE_MAP_SERVICE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::OBD2_LIVE_FRAME, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::OBD2_FREEZE_FRAME, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::OBD2_FREEZE_FRAME_INFO, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::OBD2_FREEZE_FRAME_CLEAR, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HEADLIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HIGH_BEAM_LIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::FOG_LIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HAZARD_LIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HEADLIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HIGH_BEAM_LIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::FOG_LIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::HAZARD_LIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CABIN_LIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CABIN_LIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::READING_LIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::READING_LIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SUPPORT_CUSTOMIZE_VENDOR_PERMISSION, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::DISABLED_OPTIONAL_FEATURES, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::INITIAL_USER_INFO, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::SWITCH_USER, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CREATE_USER, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::REMOVE_USER, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::USER_IDENTIFICATION_ASSOCIATION, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EVS_SERVICE_REQUEST, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::POWER_POLICY_REQ, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::POWER_POLICY_GROUP_REQ, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CURRENT_POWER_POLICY, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::WATCHDOG_ALIVE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::WATCHDOG_TERMINATED_PROCESS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::VHAL_HEARTBEAT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CLUSTER_SWITCH_UI, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CLUSTER_DISPLAY_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CLUSTER_REPORT_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CLUSTER_REQUEST_DISPLAY, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::CLUSTER_NAVIGATION_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::ELECTRONIC_TOLL_COLLECTION_CARD_TYPE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::ELECTRONIC_TOLL_COLLECTION_CARD_STATUS, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::FRONT_FOG_LIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::FRONT_FOG_LIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::REAR_FOG_LIGHTS_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::REAR_FOG_LIGHTS_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_CHARGE_CURRENT_DRAW_LIMIT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_CHARGE_PERCENT_LIMIT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_CHARGE_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_CHARGE_SWITCH, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::EV_CHARGE_TIME_REMAINING, VehiclePropertyChangeMode::CONTINUOUS},
+        {VehicleProperty::EV_REGENERATIVE_BRAKING_STATE, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::TRAILER_PRESENT, VehiclePropertyChangeMode::ON_CHANGE},
+        {VehicleProperty::VEHICLE_CURB_WEIGHT, VehiclePropertyChangeMode::STATIC},
+        {VehicleProperty::GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT, VehiclePropertyChangeMode::STATIC},
+};
+
+}  // namespace vehicle
+}  // namespace automotive
+}  // namespace hardware
+}  // namespace android
+}  // aidl
+
+#endif  // android_hardware_automotive_vehicle_aidl_generated_lib_ChangeModeForVehicleProperty_H_
diff --git a/automotive/vehicle/aidl/generated_lib/java/AccessForVehicleProperty.java b/automotive/vehicle/aidl/generated_lib/java/AccessForVehicleProperty.java
new file mode 100644
index 0000000..0a17ba1
--- /dev/null
+++ b/automotive/vehicle/aidl/generated_lib/java/AccessForVehicleProperty.java
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * DO NOT EDIT MANUALLY!!!
+ *
+ * Generated by tools/generate_annotation_enums.py.
+ */
+
+package android.hardware.automotive.vehicle;
+
+import java.util.Map;
+
+public final class AccessForVehicleProperty {
+
+    public static final Map<Integer, Integer> values = Map.ofEntries(
+        Map.entry(VehicleProperty.INFO_VIN, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_MAKE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_MODEL, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_MODEL_YEAR, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_FUEL_CAPACITY, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_FUEL_TYPE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_EV_BATTERY_CAPACITY, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_EV_CONNECTOR_TYPE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_FUEL_DOOR_LOCATION, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_EV_PORT_LOCATION, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_DRIVER_SEAT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_EXTERIOR_DIMENSIONS, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INFO_MULTI_EV_PORT_LOCATIONS, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.PERF_ODOMETER, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.PERF_VEHICLE_SPEED, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.PERF_VEHICLE_SPEED_DISPLAY, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.PERF_STEERING_ANGLE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.PERF_REAR_STEERING_ANGLE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.ENGINE_COOLANT_TEMP, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.ENGINE_OIL_LEVEL, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.ENGINE_OIL_TEMP, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.ENGINE_RPM, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.WHEEL_TICK, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.FUEL_LEVEL, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.FUEL_DOOR_OPEN, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EV_BATTERY_LEVEL, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.EV_CHARGE_PORT_OPEN, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EV_CHARGE_PORT_CONNECTED, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.EV_BATTERY_INSTANTANEOUS_CHARGE_RATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.RANGE_REMAINING, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.TIRE_PRESSURE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.CRITICALLY_LOW_TIRE_PRESSURE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.GEAR_SELECTION, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.CURRENT_GEAR, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.PARKING_BRAKE_ON, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.PARKING_BRAKE_AUTO_APPLY, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.FUEL_LEVEL_LOW, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.NIGHT_MODE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.TURN_SIGNAL_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.IGNITION_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.ABS_ACTIVE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.TRACTION_CONTROL_ACTIVE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HVAC_FAN_SPEED, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_FAN_DIRECTION, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_CURRENT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_SET, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_DEFROSTER, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_AC_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_MAX_AC_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_MAX_DEFROST_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_RECIRC_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_DUAL_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_AUTO_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_SEAT_TEMPERATURE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_SIDE_MIRROR_HEAT, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_STEERING_WHEEL_HEAT, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_DISPLAY_UNITS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_ACTUAL_FAN_SPEED_RPM, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HVAC_POWER_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_FAN_DIRECTION_AVAILABLE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HVAC_AUTO_RECIRC_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_SEAT_VENTILATION, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_ELECTRIC_DEFROSTER_ON, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_VALUE_SUGGESTION, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.DISTANCE_DISPLAY_UNITS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.FUEL_VOLUME_DISPLAY_UNITS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.TIRE_PRESSURE_DISPLAY_UNITS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EV_BATTERY_DISPLAY_UNITS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.VEHICLE_SPEED_DISPLAY_UNITS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EXTERNAL_CAR_TIME, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.ANDROID_EPOCH_TIME, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.STORAGE_ENCRYPTION_BINDING_SEED, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.ENV_OUTSIDE_TEMPERATURE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.AP_POWER_STATE_REQ, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.AP_POWER_STATE_REPORT, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.AP_POWER_BOOTUP_REASON, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.DISPLAY_BRIGHTNESS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HW_KEY_INPUT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HW_ROTARY_INPUT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HW_CUSTOM_INPUT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.DOOR_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.DOOR_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.DOOR_LOCK, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.MIRROR_Z_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.MIRROR_Z_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.MIRROR_Y_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.MIRROR_Y_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.MIRROR_LOCK, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.MIRROR_FOLD, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_MEMORY_SELECT, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.SEAT_MEMORY_SET, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.SEAT_BELT_BUCKLED, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_BELT_HEIGHT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_BELT_HEIGHT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_FORE_AFT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_FORE_AFT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_1_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_1_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_2_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_2_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEIGHT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEIGHT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_DEPTH_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_DEPTH_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_TILT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_TILT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_FORE_AFT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_FORE_AFT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_SIDE_SUPPORT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_SIDE_SUPPORT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_HEIGHT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_HEIGHT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_ANGLE_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_ANGLE_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_FORE_AFT_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_FORE_AFT_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SEAT_OCCUPANCY, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.WINDOW_POS, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.WINDOW_MOVE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.WINDOW_LOCK, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.VEHICLE_MAP_SERVICE, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.OBD2_LIVE_FRAME, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.OBD2_FREEZE_FRAME, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.OBD2_FREEZE_FRAME_INFO, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.OBD2_FREEZE_FRAME_CLEAR, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.HEADLIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HIGH_BEAM_LIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.FOG_LIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HAZARD_LIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.HEADLIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HIGH_BEAM_LIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.FOG_LIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.HAZARD_LIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.CABIN_LIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.CABIN_LIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.READING_LIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.READING_LIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SUPPORT_CUSTOMIZE_VENDOR_PERMISSION, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.DISABLED_OPTIONAL_FEATURES, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.INITIAL_USER_INFO, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.SWITCH_USER, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.CREATE_USER, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.REMOVE_USER, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.USER_IDENTIFICATION_ASSOCIATION, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EVS_SERVICE_REQUEST, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.POWER_POLICY_REQ, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.POWER_POLICY_GROUP_REQ, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.CURRENT_POWER_POLICY, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.WATCHDOG_ALIVE, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.WATCHDOG_TERMINATED_PROCESS, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.VHAL_HEARTBEAT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.CLUSTER_SWITCH_UI, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.CLUSTER_DISPLAY_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.CLUSTER_REPORT_STATE, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.CLUSTER_REQUEST_DISPLAY, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.CLUSTER_NAVIGATION_STATE, VehiclePropertyAccess.WRITE),
+        Map.entry(VehicleProperty.ELECTRONIC_TOLL_COLLECTION_CARD_TYPE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.ELECTRONIC_TOLL_COLLECTION_CARD_STATUS, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.FRONT_FOG_LIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.FRONT_FOG_LIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.REAR_FOG_LIGHTS_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.REAR_FOG_LIGHTS_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EV_CHARGE_CURRENT_DRAW_LIMIT, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EV_CHARGE_PERCENT_LIMIT, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EV_CHARGE_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.EV_CHARGE_SWITCH, VehiclePropertyAccess.READ_WRITE),
+        Map.entry(VehicleProperty.EV_CHARGE_TIME_REMAINING, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.EV_REGENERATIVE_BRAKING_STATE, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.TRAILER_PRESENT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.VEHICLE_CURB_WEIGHT, VehiclePropertyAccess.READ),
+        Map.entry(VehicleProperty.GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT, VehiclePropertyAccess.READ)
+    );
+
+}
diff --git a/automotive/vehicle/aidl/generated_lib/java/Android.bp b/automotive/vehicle/aidl/generated_lib/java/Android.bp
new file mode 100644
index 0000000..1d612e8
--- /dev/null
+++ b/automotive/vehicle/aidl/generated_lib/java/Android.bp
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+filegroup {
+    name: "IVehicleGeneratedJavaFiles",
+    srcs: [
+        "*.java",
+    ],
+}
diff --git a/automotive/vehicle/aidl/generated_lib/java/ChangeModeForVehicleProperty.java b/automotive/vehicle/aidl/generated_lib/java/ChangeModeForVehicleProperty.java
new file mode 100644
index 0000000..5dfcd22
--- /dev/null
+++ b/automotive/vehicle/aidl/generated_lib/java/ChangeModeForVehicleProperty.java
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * DO NOT EDIT MANUALLY!!!
+ *
+ * Generated by tools/generate_annotation_enums.py.
+ */
+
+package android.hardware.automotive.vehicle;
+
+import java.util.Map;
+
+public final class ChangeModeForVehicleProperty {
+
+    public static final Map<Integer, Integer> values = Map.ofEntries(
+        Map.entry(VehicleProperty.INFO_VIN, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_MAKE, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_MODEL, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_MODEL_YEAR, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_FUEL_CAPACITY, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_FUEL_TYPE, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_EV_BATTERY_CAPACITY, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_EV_CONNECTOR_TYPE, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_FUEL_DOOR_LOCATION, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_EV_PORT_LOCATION, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_DRIVER_SEAT, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_EXTERIOR_DIMENSIONS, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INFO_MULTI_EV_PORT_LOCATIONS, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.PERF_ODOMETER, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.PERF_VEHICLE_SPEED, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.PERF_VEHICLE_SPEED_DISPLAY, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.PERF_STEERING_ANGLE, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.PERF_REAR_STEERING_ANGLE, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.ENGINE_COOLANT_TEMP, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.ENGINE_OIL_LEVEL, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.ENGINE_OIL_TEMP, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.ENGINE_RPM, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.WHEEL_TICK, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.FUEL_LEVEL, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.FUEL_DOOR_OPEN, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_BATTERY_LEVEL, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.EV_CHARGE_PORT_OPEN, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_CHARGE_PORT_CONNECTED, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_BATTERY_INSTANTANEOUS_CHARGE_RATE, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.RANGE_REMAINING, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.TIRE_PRESSURE, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.CRITICALLY_LOW_TIRE_PRESSURE, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.GEAR_SELECTION, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CURRENT_GEAR, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.PARKING_BRAKE_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.PARKING_BRAKE_AUTO_APPLY, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.FUEL_LEVEL_LOW, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.NIGHT_MODE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.TURN_SIGNAL_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.IGNITION_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.ABS_ACTIVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.TRACTION_CONTROL_ACTIVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_FAN_SPEED, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_FAN_DIRECTION, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_CURRENT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_SET, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_DEFROSTER, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_AC_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_MAX_AC_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_MAX_DEFROST_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_RECIRC_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_DUAL_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_AUTO_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_SEAT_TEMPERATURE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_SIDE_MIRROR_HEAT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_STEERING_WHEEL_HEAT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_DISPLAY_UNITS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_ACTUAL_FAN_SPEED_RPM, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_POWER_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_FAN_DIRECTION_AVAILABLE, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.HVAC_AUTO_RECIRC_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_SEAT_VENTILATION, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_ELECTRIC_DEFROSTER_ON, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HVAC_TEMPERATURE_VALUE_SUGGESTION, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.DISTANCE_DISPLAY_UNITS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.FUEL_VOLUME_DISPLAY_UNITS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.TIRE_PRESSURE_DISPLAY_UNITS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_BATTERY_DISPLAY_UNITS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.VEHICLE_SPEED_DISPLAY_UNITS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EXTERNAL_CAR_TIME, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.ANDROID_EPOCH_TIME, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.STORAGE_ENCRYPTION_BINDING_SEED, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.ENV_OUTSIDE_TEMPERATURE, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.AP_POWER_STATE_REQ, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.AP_POWER_STATE_REPORT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.AP_POWER_BOOTUP_REASON, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.DISPLAY_BRIGHTNESS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HW_KEY_INPUT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HW_ROTARY_INPUT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HW_CUSTOM_INPUT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.DOOR_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.DOOR_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.DOOR_LOCK, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.MIRROR_Z_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.MIRROR_Z_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.MIRROR_Y_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.MIRROR_Y_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.MIRROR_LOCK, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.MIRROR_FOLD, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_MEMORY_SELECT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_MEMORY_SET, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_BELT_BUCKLED, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_BELT_HEIGHT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_BELT_HEIGHT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_FORE_AFT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_FORE_AFT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_1_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_1_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_2_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_BACKREST_ANGLE_2_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEIGHT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEIGHT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_DEPTH_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_DEPTH_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_TILT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_TILT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_FORE_AFT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_FORE_AFT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_SIDE_SUPPORT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_LUMBAR_SIDE_SUPPORT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_HEIGHT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_HEIGHT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_ANGLE_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_ANGLE_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_FORE_AFT_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_HEADREST_FORE_AFT_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SEAT_OCCUPANCY, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.WINDOW_POS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.WINDOW_MOVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.WINDOW_LOCK, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.VEHICLE_MAP_SERVICE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.OBD2_LIVE_FRAME, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.OBD2_FREEZE_FRAME, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.OBD2_FREEZE_FRAME_INFO, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.OBD2_FREEZE_FRAME_CLEAR, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HEADLIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HIGH_BEAM_LIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.FOG_LIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HAZARD_LIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HEADLIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HIGH_BEAM_LIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.FOG_LIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.HAZARD_LIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CABIN_LIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CABIN_LIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.READING_LIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.READING_LIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SUPPORT_CUSTOMIZE_VENDOR_PERMISSION, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.DISABLED_OPTIONAL_FEATURES, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.INITIAL_USER_INFO, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.SWITCH_USER, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CREATE_USER, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.REMOVE_USER, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.USER_IDENTIFICATION_ASSOCIATION, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EVS_SERVICE_REQUEST, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.POWER_POLICY_REQ, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.POWER_POLICY_GROUP_REQ, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CURRENT_POWER_POLICY, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.WATCHDOG_ALIVE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.WATCHDOG_TERMINATED_PROCESS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.VHAL_HEARTBEAT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CLUSTER_SWITCH_UI, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CLUSTER_DISPLAY_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CLUSTER_REPORT_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CLUSTER_REQUEST_DISPLAY, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.CLUSTER_NAVIGATION_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.ELECTRONIC_TOLL_COLLECTION_CARD_TYPE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.ELECTRONIC_TOLL_COLLECTION_CARD_STATUS, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.FRONT_FOG_LIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.FRONT_FOG_LIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.REAR_FOG_LIGHTS_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.REAR_FOG_LIGHTS_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_CHARGE_CURRENT_DRAW_LIMIT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_CHARGE_PERCENT_LIMIT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_CHARGE_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_CHARGE_SWITCH, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.EV_CHARGE_TIME_REMAINING, VehiclePropertyChangeMode.CONTINUOUS),
+        Map.entry(VehicleProperty.EV_REGENERATIVE_BRAKING_STATE, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.TRAILER_PRESENT, VehiclePropertyChangeMode.ON_CHANGE),
+        Map.entry(VehicleProperty.VEHICLE_CURB_WEIGHT, VehiclePropertyChangeMode.STATIC),
+        Map.entry(VehicleProperty.GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT, VehiclePropertyChangeMode.STATIC)
+    );
+
+}
diff --git a/automotive/vehicle/aidl/impl/Android.bp b/automotive/vehicle/aidl/impl/Android.bp
index d24a739..73f7df0 100644
--- a/automotive/vehicle/aidl/impl/Android.bp
+++ b/automotive/vehicle/aidl/impl/Android.bp
@@ -19,10 +19,16 @@
 }
 
 cc_defaults {
+    name: "VehicleHalInterfaceDefaults",
+    static_libs: [
+        "android.hardware.automotive.vehicle-V2-ndk",
+    ],
+}
+
+cc_defaults {
     name: "VehicleHalDefaults",
     static_libs: [
         "android-automotive-large-parcelable-lib",
-        "android.hardware.automotive.vehicle-V1-ndk",
         "libmath",
     ],
     shared_libs: [
@@ -37,6 +43,7 @@
         "-Wthread-safety",
     ],
     defaults: [
+        "VehicleHalInterfaceDefaults",
         "android-automotive-large-parcelable-defaults",
     ],
 }
diff --git a/automotive/vehicle/aidl/impl/README.md b/automotive/vehicle/aidl/impl/README.md
new file mode 100644
index 0000000..121ffd1
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/README.md
@@ -0,0 +1,58 @@
+# AIDL VHAL libraries and reference implementation.
+---
+
+This directory stores the libraries useful for implementing vendor AIDL VHAL.
+This directory also stores a reference fake implementation for AIDL VHAL.
+
+## default_config
+
+Stores the default vehicle property configurations for reference vehicle HAL.
+Vendor implementation could copy this library but must update the configuration
+to meet their own requirements, e.g. enable or disable certain properties or
+update the initial value for certain properties.
+
+##	fake_impl
+
+Contains libraries used specifically for the fake reference VHAL implementation.
+These libraries are for test only and must not be directly used for vendor
+VHAL implementation.
+
+These libraries contain test-spcific logic and must not run directly on a real
+vehicle.
+
+## grpc
+
+Stores code for GRPC based VHAL implementation.
+
+## hardware
+
+Defines an interface `IVehicleHardware.h` which vendor must implement for
+vehicle-specific logic if they want to follow our reference VHAL design.
+
+## proto
+
+Stores Some protobuf files translated from AIDL VHAL interface types. These
+files are used in GRPC VHAL implementation.
+
+## utils
+
+Defines a library `VehicleHalUtils` which provides useful utility functions for
+VHAL implementation. Vendor VHAL could use this library.
+
+## vhal
+
+Defines a library `DefaultVehicleHal` which provides generic logic for all VHAL
+implementations (including reference VHAL). Vendor VHAL implementation could
+use this library, along with their own implementation for `IVehicleHardware`
+interface.
+
+Also defines a binary `android.hardware.automotive.vehicle@V1-default-service`
+which is the reference VHAL implementation. It implements `IVehicle.aidl`
+interface. It uses `DefaultVehicleHal`, along with `FakeVehicleHardware`
+(in fake_impl). It simulates the vehicle bus interaction by using an
+in-memory map. Meaning that all properties (except for some special ones) are
+just written into a hash map and read from a hash map without relying on any
+hardware. As a result, the reference implementation can run on emulator or
+any host environment.
+
+Vendor must not directly use the reference implementation for a real vehicle.
\ No newline at end of file
diff --git a/automotive/vehicle/aidl/impl/default_config/config/Android.bp b/automotive/vehicle/aidl/impl/default_config/config/Android.bp
new file mode 100644
index 0000000..3f9edca
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/default_config/config/Android.bp
@@ -0,0 +1,14 @@
+filegroup {
+    name: "VehicleHalDefaultProperties_JSON",
+    srcs: ["DefaultProperties.json"],
+}
+
+filegroup {
+    name: "VehicleHalTestProperties_JSON",
+    srcs: ["TestProperties.json"],
+}
+
+filegroup {
+    name: "VehicleHalVendorClusterTestProperties_JSON",
+    srcs: ["VendorClusterTestProperties.json"],
+}
diff --git a/automotive/vehicle/aidl/impl/default_config/config/DefaultProperties.json b/automotive/vehicle/aidl/impl/default_config/config/DefaultProperties.json
new file mode 100644
index 0000000..491524f
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/default_config/config/DefaultProperties.json
@@ -0,0 +1,1345 @@
+{
+    "apiVersion": 1,
+    "properties": [
+        {
+            "property": "VehicleProperty::INFO_FUEL_CAPACITY",
+            "defaultValue": {
+                "floatValues": [
+                    15000.0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_FUEL_TYPE",
+            "defaultValue": {
+                "int32Values": [
+                    "FuelType::FUEL_TYPE_UNLEADED"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_EV_BATTERY_CAPACITY",
+            "defaultValue": {
+                "floatValues": [
+                    150000.0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_EV_CONNECTOR_TYPE",
+            "defaultValue": {
+                "int32Values": [
+                    "EvConnectorType::IEC_TYPE_1_AC"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_FUEL_DOOR_LOCATION",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::FUEL_DOOR_REAR_LEFT"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_EV_PORT_LOCATION",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::CHARGE_PORT_FRONT_LEFT"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_MULTI_EV_PORT_LOCATIONS",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::CHARGE_PORT_FRONT_LEFT",
+                    "Constants::CHARGE_PORT_REAR_LEFT"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_MAKE",
+            "defaultValue": {
+                "stringValue": "Toy Vehicle"
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_MODEL",
+            "defaultValue": {
+                "stringValue": "Speedy Model"
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_MODEL_YEAR",
+            "defaultValue": {
+                "int32Values": [
+                    2020
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INFO_EXTERIOR_DIMENSIONS",
+            "defaultValue": {
+                "int32Values": [
+                    1776,
+                    4950,
+                    2008,
+                    2140,
+                    2984,
+                    1665,
+                    1667,
+                    11800
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::PERF_VEHICLE_SPEED",
+            "defaultValue": {
+                "floatValues": [
+                    0.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::VEHICLE_SPEED_DISPLAY_UNITS",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleUnit::KILOMETERS_PER_HOUR"
+                ]
+            },
+            "configArray": [
+                "VehicleUnit::METER_PER_SEC",
+                "VehicleUnit::MILES_PER_HOUR",
+                "VehicleUnit::KILOMETERS_PER_HOUR"
+            ]
+        },
+        {
+            "property": "VehicleProperty::EV_BATTERY_DISPLAY_UNITS",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleUnit::KILOWATT_HOUR"
+                ]
+            },
+            "configArray": [
+                "VehicleUnit::WATT_HOUR",
+                "VehicleUnit::AMPERE_HOURS",
+                "VehicleUnit::KILOWATT_HOUR"
+            ]
+        },
+        {
+            "property": "VehicleProperty::SEAT_OCCUPANCY",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            "VehicleSeatOccupancyState::VACANT"
+                        ]
+                    },
+                    "areaId": "Constants::SEAT_1_LEFT"
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            "VehicleSeatOccupancyState::VACANT"
+                        ]
+                    },
+                    "areaId": "Constants::SEAT_1_RIGHT"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::INFO_DRIVER_SEAT",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::SEAT_1_LEFT"
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": 0
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::PERF_ODOMETER",
+            "defaultValue": {
+                "floatValues": [
+                    0.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::PERF_STEERING_ANGLE",
+            "defaultValue": {
+                "floatValues": [
+                    0.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::PERF_REAR_STEERING_ANGLE",
+            "defaultValue": {
+                "floatValues": [
+                    0.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::ENGINE_RPM",
+            "defaultValue": {
+                "floatValues": [
+                    0.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::FUEL_LEVEL",
+            "defaultValue": {
+                "floatValues": [
+                    15000.0
+                ]
+            },
+            "maxSampleRate": 100.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::FUEL_DOOR_OPEN",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::EV_BATTERY_LEVEL",
+            "defaultValue": {
+                "floatValues": [
+                    150000.0
+                ]
+            },
+            "maxSampleRate": 100.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::EV_CHARGE_PORT_OPEN",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::EV_CHARGE_PORT_CONNECTED",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::EV_BATTERY_INSTANTANEOUS_CHARGE_RATE",
+            "defaultValue": {
+                "floatValues": [
+                    0.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::EV_CHARGE_CURRENT_DRAW_LIMIT",
+            "defaultValue": {
+                "floatValues": [
+                    12.5
+                ]
+            },
+            "comment": "ConfigArray specifies Max current draw allowed by vehicle in amperes",
+            "configArray": [
+                20
+            ]
+        },
+        {
+            "property": "VehicleProperty::EV_CHARGE_PERCENT_LIMIT",
+            "defaultValue": {
+                "floatValues": [
+                    40.0
+                ]
+            },
+            "configArray": [
+                20,
+                40,
+                60,
+                80,
+                100
+            ]
+        },
+        {
+            "property": "VehicleProperty::EV_CHARGE_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    2
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::EV_CHARGE_SWITCH",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::EV_CHARGE_TIME_REMAINING",
+            "defaultValue": {
+                "int32Values": [
+                    20
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::EV_REGENERATIVE_BRAKING_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    2
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::TRAILER_PRESENT",
+            "defaultValue": {
+                "int32Values": [
+                    2
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::VEHICLE_CURB_WEIGHT",
+            "defaultValue": {
+                "int32Values": [
+                    30
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::RANGE_REMAINING",
+            "defaultValue": {
+                "floatValues": [
+                    50000.0
+                ]
+            },
+            "comment": "units in meter",
+            "maxSampleRate": 2.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::TIRE_PRESSURE",
+            "defaultValue": {
+                "floatValues": [
+                    200.0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::WHEEL_FRONT_LEFT",
+                    "minFloatValue": 193.0,
+                    "maxFloatValue": 300.0
+                },
+                {
+                    "areaId": "Constants::WHEEL_FRONT_RIGHT",
+                    "minFloatValue": 193.0,
+                    "maxFloatValue": 300.0
+                },
+                {
+                    "areaId": "Constants::WHEEL_REAR_LEFT",
+                    "minFloatValue": 193.0,
+                    "maxFloatValue": 300.0
+                },
+                {
+                    "areaId": "Constants::WHEEL_REAR_RIGHT",
+                    "minFloatValue": 193.0,
+                    "maxFloatValue": 300.0
+                }
+            ],
+            "comment": "Units in kpa",
+            "maxSampleRate": 2.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::CRITICALLY_LOW_TIRE_PRESSURE",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            137.0
+                        ]
+                    },
+                    "areaId": "Constants::WHEEL_FRONT_LEFT"
+                },
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            137.0
+                        ]
+                    },
+                    "areaId": "Constants::WHEEL_FRONT_RIGHT"
+                },
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            137.0
+                        ]
+                    },
+                    "areaId": "Constants::WHEEL_REAR_RIGHT"
+                },
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            137.0
+                        ]
+                    },
+                    "areaId": "Constants::WHEEL_REAR_LEFT"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::TIRE_PRESSURE_DISPLAY_UNITS",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleUnit::PSI"
+                ]
+            },
+            "configArray": [
+                "VehicleUnit::KILOPASCAL",
+                "VehicleUnit::PSI",
+                "VehicleUnit::BAR"
+            ]
+        },
+        {
+            "property": "VehicleProperty::CURRENT_GEAR",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleGear::GEAR_PARK"
+                ]
+            },
+            "configArray": [
+                "VehicleGear::GEAR_PARK",
+                "VehicleGear::GEAR_NEUTRAL",
+                "VehicleGear::GEAR_REVERSE",
+                "VehicleGear::GEAR_1",
+                "VehicleGear::GEAR_2",
+                "VehicleGear::GEAR_3",
+                "VehicleGear::GEAR_4",
+                "VehicleGear::GEAR_5"
+            ]
+        },
+        {
+            "property": "VehicleProperty::PARKING_BRAKE_ON",
+            "defaultValue": {
+                "int32Values": [
+                    1
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::PARKING_BRAKE_AUTO_APPLY",
+            "defaultValue": {
+                "int32Values": [
+                    1
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::FUEL_LEVEL_LOW",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::FUEL_VOLUME_DISPLAY_UNITS",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleUnit::LITER"
+                ]
+            },
+            "configArray": [
+                "VehicleUnit::LITER",
+                "VehicleUnit::US_GALLON"
+            ]
+        },
+        {
+            "property": "VehicleProperty::HW_KEY_INPUT",
+            "defaultValue": {
+                "int32Values": [
+                    0,
+                    0,
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::HW_ROTARY_INPUT",
+            "defaultValue": {
+                "int32Values": [
+                    0,
+                    0,
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::HW_CUSTOM_INPUT",
+            "defaultValue": {
+                "int32Values": [
+                    0,
+                    0,
+                    0
+                ]
+            },
+            "configArray": [
+                0,
+                0,
+                0,
+                3,
+                0,
+                0,
+                0,
+                0,
+                0
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_POWER_ON",
+            "defaultValue": {
+                "int32Values": [
+                    1
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ],
+            "configArray": [
+                "VehicleProperty::HVAC_FAN_SPEED",
+                "VehicleProperty::HVAC_FAN_DIRECTION"
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_DEFROSTER",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "VehicleAreaWindow::FRONT_WINDSHIELD"
+                },
+                {
+                    "areaId": "VehicleAreaWindow::REAR_WINDSHIELD"
+                }
+            ],
+            "comment": "0 means using for all areas"
+        },
+        {
+            "property": "VehicleProperty::HVAC_ELECTRIC_DEFROSTER_ON",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "VehicleAreaWindow::FRONT_WINDSHIELD"
+                },
+                {
+                    "areaId": "VehicleAreaWindow::REAR_WINDSHIELD"
+                }
+            ],
+            "comment": "0 means using for all areas"
+        },
+        {
+            "property": "VehicleProperty::HVAC_MAX_DEFROST_ON",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_RECIRC_ON",
+            "defaultValue": {
+                "int32Values": [
+                    1
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_AUTO_RECIRC_ON",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_AC_ON",
+            "defaultValue": {
+                "int32Values": [
+                    1
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_MAX_AC_ON",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_AUTO_ON",
+            "defaultValue": {
+                "int32Values": [
+                    1
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_DUAL_ON",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_FAN_SPEED",
+            "defaultValue": {
+                "int32Values": [
+                    3
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL",
+                    "minInt32Value": 1,
+                    "maxInt32Value": 7
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_FAN_DIRECTION",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleHvacFanDirection::FACE"
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_FAN_DIRECTION_AVAILABLE",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::FAN_DIRECTION_FACE",
+                    "Constants::FAN_DIRECTION_FLOOR",
+                    "Constants::FAN_DIRECTION_FACE_FLOOR",
+                    "Constants::FAN_DIRECTION_DEFROST",
+                    "Constants::FAN_DIRECTION_FACE_DEFROST",
+                    "Constants::FAN_DIRECTION_FLOOR_DEFROST",
+                    "Constants::FAN_DIRECTION_FLOOR_DEFROST_FACE"
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::HVAC_ALL"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_SEAT_VENTILATION",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::SEAT_1_LEFT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 3
+                },
+                {
+                    "areaId": "Constants::SEAT_1_RIGHT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 3
+                }
+            ],
+            "comment": "0 is off and +ve values indicate ventilation level."
+        },
+        {
+            "property": "VehicleProperty::HVAC_STEERING_WHEEL_HEAT",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": 0,
+                    "minInt32Value": -2,
+                    "maxInt32Value": 2
+                }
+            ],
+            "comment": "+ve values for heating and -ve for cooling"
+        },
+        {
+            "property": "VehicleProperty::HVAC_SEAT_TEMPERATURE",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::SEAT_1_LEFT",
+                    "minInt32Value": -2,
+                    "maxInt32Value": 2
+                },
+                {
+                    "areaId": "Constants::SEAT_1_RIGHT",
+                    "minInt32Value": -2,
+                    "maxInt32Value": 2
+                }
+            ],
+            "comment": "+ve values for heating and -ve for cooling"
+        },
+        {
+            "property": "VehicleProperty::HVAC_TEMPERATURE_SET",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            16.0
+                        ]
+                    },
+                    "areaId": 49,
+                    "minFloatValue": 16.0,
+                    "maxFloatValue": 32.0
+                },
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            20.0
+                        ]
+                    },
+                    "areaId": 68,
+                    "minFloatValue": 16.0,
+                    "maxFloatValue": 32.0
+                }
+            ],
+            "configArray": [
+                160,
+                280,
+                5,
+                605,
+                825,
+                10
+            ]
+        },
+        {
+            "property": "VehicleProperty::HVAC_TEMPERATURE_VALUE_SUGGESTION",
+            "defaultValue": {
+                "floatValues": [
+                    66.19999694824219,
+                    49.0,
+                    19.0,
+                    66.5
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::ENV_OUTSIDE_TEMPERATURE",
+            "defaultValue": {
+                "floatValues": [
+                    25.0
+                ]
+            },
+            "maxSampleRate": 2.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::HVAC_TEMPERATURE_DISPLAY_UNITS",
+            "defaultValue": {
+                "int32Values": [
+                    49
+                ]
+            },
+            "configArray": [
+                49,
+                48
+            ]
+        },
+        {
+            "property": "VehicleProperty::DISTANCE_DISPLAY_UNITS",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleUnit::MILE"
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": 0
+                }
+            ],
+            "configArray": [
+                "VehicleUnit::KILOMETER",
+                "VehicleUnit::MILE"
+            ]
+        },
+        {
+            "property": "VehicleProperty::NIGHT_MODE",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::GEAR_SELECTION",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleGear::GEAR_PARK"
+                ]
+            },
+            "configArray": [
+                "VehicleGear::GEAR_PARK",
+                "VehicleGear::GEAR_NEUTRAL",
+                "VehicleGear::GEAR_REVERSE",
+                "VehicleGear::GEAR_DRIVE",
+                "VehicleGear::GEAR_1",
+                "VehicleGear::GEAR_2",
+                "VehicleGear::GEAR_3",
+                "VehicleGear::GEAR_4",
+                "VehicleGear::GEAR_5"
+            ]
+        },
+        {
+            "property": "VehicleProperty::TURN_SIGNAL_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleTurnSignal::NONE"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::IGNITION_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleIgnitionState::ON"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::ENGINE_COOLANT_TEMP",
+            "defaultValue": {
+                "floatValues": [
+                    75.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::ENGINE_OIL_LEVEL",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleOilLevel::NORMAL"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::ENGINE_OIL_TEMP",
+            "defaultValue": {
+                "floatValues": [
+                    101.0
+                ]
+            },
+            "maxSampleRate": 10.0,
+            "minSampleRate": 0.10000000149011612
+        },
+        {
+            "property": "VehicleProperty::DOOR_LOCK",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            1
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_1_LEFT"
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            1
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_1_RIGHT"
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            1
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_2_LEFT"
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            1
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_2_RIGHT"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::DOOR_POS",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::DOOR_1_LEFT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 1
+                },
+                {
+                    "areaId": "Constants::DOOR_1_RIGHT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 1
+                },
+                {
+                    "areaId": "Constants::DOOR_2_LEFT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 1
+                },
+                {
+                    "areaId": "Constants::DOOR_2_RIGHT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 1
+                },
+                {
+                    "areaId": "Constants::DOOR_REAR",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 1
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::WINDOW_LOCK",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            0
+                        ]
+                    },
+                    "areaId": "Constants::WINDOW_1_RIGHT_2_LEFT_2_RIGHT"
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::WINDOW_POS",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": "Constants::WINDOW_1_LEFT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 10,
+                },
+                {
+                    "areaId": "Constants::WINDOW_1_RIGHT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 10,
+                },
+                {
+                    "areaId": "Constants::WINDOW_2_LEFT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 10,
+                },
+                {
+                    "areaId": "Constants::WINDOW_2_RIGHT",
+                    "minInt32Value": 0,
+                    "maxInt32Value": 10,
+                },
+                {
+                    "areaId": "Constants::WINDOW_ROOF_TOP_1",
+                    "minInt32Value": -10,
+                    "maxInt32Value": 10
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::WHEEL_TICK",
+            "defaultValue": {
+                "int64Values": [
+                    0,
+                    100000,
+                    200000,
+                    300000,
+                    400000
+                ]
+            },
+            "configArray": [
+                15,
+                50000,
+                50000,
+                50000,
+                50000
+            ],
+            "maxSampleRate": 10.0,
+            "minSampleRate": 1.0
+        },
+        {
+            "property": "VehicleProperty::ABS_ACTIVE",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::TRACTION_CONTROL_ACTIVE",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::AP_POWER_STATE_REQ",
+            "configArray": [
+                0
+            ]
+        },
+        {
+            "property": "VehicleProperty::AP_POWER_STATE_REPORT",
+            "defaultValue": {
+                "int32Values": [
+                    "VehicleApPowerStateReport::WAIT_FOR_VHAL",
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::DISPLAY_BRIGHTNESS",
+            "defaultValue": {
+                "int32Values": [
+                    100
+                ]
+            },
+            "areas": [
+                {
+                    "areaId": 0,
+                    "minInt32Value": 0,
+                    "maxInt32Value": 100
+                }
+            ]
+        },
+        {
+            "property": "VehicleProperty::OBD2_LIVE_FRAME",
+            "configArray": [
+                0,
+                0
+            ]
+        },
+        {
+            "property": "VehicleProperty::OBD2_FREEZE_FRAME",
+            "configArray": [
+                0,
+                0
+            ]
+        },
+        {
+            "property": "VehicleProperty::OBD2_FREEZE_FRAME_INFO"
+        },
+        {
+            "property": "VehicleProperty::OBD2_FREEZE_FRAME_CLEAR",
+            "configArray": [
+                1
+            ]
+        },
+        {
+            "property": "VehicleProperty::HEADLIGHTS_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_STATE_ON"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::HIGH_BEAM_LIGHTS_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_STATE_ON"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::FRONT_FOG_LIGHTS_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_STATE_ON"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::REAR_FOG_LIGHTS_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_STATE_ON"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::HAZARD_LIGHTS_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_STATE_ON"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::HEADLIGHTS_SWITCH",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_SWITCH_AUTO"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::HIGH_BEAM_LIGHTS_SWITCH",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_SWITCH_AUTO"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::FOG_LIGHTS_SWITCH",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_SWITCH_AUTO"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::FRONT_FOG_LIGHTS_SWITCH",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_SWITCH_AUTO"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::REAR_FOG_LIGHTS_SWITCH",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_SWITCH_AUTO"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::HAZARD_LIGHTS_SWITCH",
+            "defaultValue": {
+                "int32Values": [
+                    "Constants::LIGHT_SWITCH_AUTO"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::EVS_SERVICE_REQUEST",
+            "defaultValue": {
+                "int32Values": [
+                    "EvsServiceType::REARVIEW",
+                    "EvsServiceState::OFF"
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::VEHICLE_MAP_SERVICE"
+        },
+        {
+            "property": "VehicleProperty::ELECTRONIC_TOLL_COLLECTION_CARD_TYPE",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::ELECTRONIC_TOLL_COLLECTION_CARD_STATUS",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            }
+        },
+        {
+            "property": "VehicleProperty::INITIAL_USER_INFO"
+        },
+        {
+            "property": "VehicleProperty::SWITCH_USER"
+        },
+        {
+            "property": "VehicleProperty::CREATE_USER"
+        },
+        {
+            "property": "VehicleProperty::REMOVE_USER"
+        },
+        {
+            "property": "VehicleProperty::USER_IDENTIFICATION_ASSOCIATION"
+        },
+        {
+            "property": "VehicleProperty::POWER_POLICY_REQ"
+        },
+        {
+            "property": "VehicleProperty::POWER_POLICY_GROUP_REQ"
+        },
+        {
+            "property": "VehicleProperty::CURRENT_POWER_POLICY"
+        },
+        {
+            "property": "VehicleProperty::ANDROID_EPOCH_TIME",
+        },
+        {
+            "property": "VehicleProperty::WATCHDOG_ALIVE",
+        },
+        {
+            "property": "VehicleProperty::WATCHDOG_TERMINATED_PROCESS",
+        },
+        {
+            "property": "VehicleProperty::VHAL_HEARTBEAT"
+        },
+        {
+            "property": "VehicleProperty::CLUSTER_SWITCH_UI",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "comment": "0 means ClusterHome"
+        },
+        {
+            "property": "VehicleProperty::CLUSTER_DISPLAY_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    0,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1
+                ]
+            },
+            "comment":
+                    "Value means: 0 /* Off */, -1, -1, -1, -1 /* Bounds */, -1, -1, -1, -1 /* Insets */",
+        },
+        {
+            "property": "VehicleProperty::CLUSTER_REPORT_STATE",
+            "configArray": [
+                0,
+                0,
+                0,
+                11,
+                0,
+                0,
+                0,
+                0,
+                16
+            ]
+        },
+        {
+            "property": "VehicleProperty::CLUSTER_REQUEST_DISPLAY",
+        },
+        {
+            "property": "VehicleProperty::CLUSTER_NAVIGATION_STATE",
+        },
+        {
+            "property": "VehicleProperty::GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT",
+            "defaultValue": {
+                "int32Values": [
+                    "GsrComplianceRequirementType::GSR_COMPLIANCE_REQUIRED_THROUGH_SYSTEM_IMAGE"
+                ]
+            }
+        }
+    ]
+}
\ No newline at end of file
diff --git a/automotive/vehicle/aidl/impl/default_config/config/TestProperties.json b/automotive/vehicle/aidl/impl/default_config/config/TestProperties.json
new file mode 100644
index 0000000..33c6cc2
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/default_config/config/TestProperties.json
@@ -0,0 +1,204 @@
+{
+    "properties": [
+        {
+            "property": "Constants::kMixedTypePropertyForTest",
+            "defaultValue": {
+                "floatValues": [
+                    4.5
+                ],
+                "int32Values": [
+                    1,
+                    2,
+                    3
+                ],
+                "stringValue": "MIXED property"
+            },
+            "configArray": [
+                1,
+                1,
+                0,
+                2,
+                0,
+                0,
+                1,
+                0,
+                0
+            ],
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::VENDOR_EXTENSION_BOOLEAN_PROPERTY",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            1
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_1_LEFT"
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            1
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_1_RIGHT"
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            0
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_2_LEFT"
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            0
+                        ]
+                    },
+                    "areaId": "Constants::DOOR_2_RIGHT"
+                }
+            ],
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::VENDOR_EXTENSION_FLOAT_PROPERTY",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            1.0
+                        ]
+                    },
+                    "areaId": "Constants::HVAC_LEFT",
+                    "minFloatValue": -10.0,
+                    "maxFloatValue": 10.0
+                },
+                {
+                    "defaultValue": {
+                        "floatValues": [
+                            2.0
+                        ]
+                    },
+                    "areaId": "Constants::HVAC_RIGHT",
+                    "minFloatValue": -10.0,
+                    "maxFloatValue": 10.0
+                }
+            ],
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::VENDOR_EXTENSION_INT_PROPERTY",
+            "areas": [
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            1
+                        ]
+                    },
+                    "areaId": "VehicleAreaWindow::FRONT_WINDSHIELD",
+                    "minInt32Value": -100,
+                    "maxInt32Value": 100
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            0
+                        ]
+                    },
+                    "areaId": "VehicleAreaWindow::REAR_WINDSHIELD",
+                    "minInt32Value": -100,
+                    "maxInt32Value": 100
+                },
+                {
+                    "defaultValue": {
+                        "int32Values": [
+                            -1
+                        ]
+                    },
+                    "areaId": "VehicleAreaWindow::ROOF_TOP_1",
+                    "minInt32Value": -100,
+                    "maxInt32Value": 100
+                }
+            ],
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::VENDOR_EXTENSION_STRING_PROPERTY",
+            "defaultValue": {
+                "stringValue": "Vendor String Property"
+            },
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::PLACEHOLDER_PROPERTY_INT",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::PLACEHOLDER_PROPERTY_FLOAT",
+            "defaultValue": {
+                "floatValues": [
+                    0.0
+                ]
+            },
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::PLACEHOLDER_PROPERTY_BOOLEAN",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::PLACEHOLDER_PROPERTY_STRING",
+            "defaultValue": {
+                "stringValue": "Test"
+            },
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::ECHO_REVERSE_BYTES",
+            "access": "VehiclePropertyAccess::READ_WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "VehicleProperty::SUPPORT_CUSTOMIZE_VENDOR_PERMISSION",
+            "defaultValue": {
+                "int32Values": [
+                    1
+                ]
+            },
+            "configArray": [
+                "Constants::kMixedTypePropertyForTest",
+                "VehicleVendorPermission::PERMISSION_GET_VENDOR_CATEGORY_INFO",
+                "VehicleVendorPermission::PERMISSION_SET_VENDOR_CATEGORY_INFO",
+                "Constants::VENDOR_EXTENSION_INT_PROPERTY",
+                "VehicleVendorPermission::PERMISSION_GET_VENDOR_CATEGORY_SEAT",
+                "VehicleVendorPermission::PERMISSION_NOT_ACCESSIBLE",
+                "Constants::VENDOR_EXTENSION_FLOAT_PROPERTY",
+                "VehicleVendorPermission::PERMISSION_DEFAULT",
+                "VehicleVendorPermission::PERMISSION_DEFAULT"
+            ]
+        }
+    ]
+}
\ No newline at end of file
diff --git a/automotive/vehicle/aidl/impl/default_config/config/VendorClusterTestProperties.json b/automotive/vehicle/aidl/impl/default_config/config/VendorClusterTestProperties.json
new file mode 100644
index 0000000..3a1a783
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/default_config/config/VendorClusterTestProperties.json
@@ -0,0 +1,63 @@
+{
+    "properties": [
+        {
+            "property": "Constants::VENDOR_CLUSTER_SWITCH_UI",
+            "access": "VehiclePropertyAccess::WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::VENDOR_CLUSTER_DISPLAY_STATE",
+            "access": "VehiclePropertyAccess::WRITE",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        },
+        {
+            "property": "Constants::VENDOR_CLUSTER_REPORT_STATE",
+            "defaultValue": {
+                "int32Values": [
+                    0,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    -1,
+                    0,
+                    -1
+                ]
+            },
+            "configArray": [
+                0,
+                0,
+                0,
+                11,
+                0,
+                0,
+                0,
+                0,
+                16
+            ],
+            "access": "VehiclePropertyAccess::READ",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE",
+            "comment":
+                    "Value means 0 /* Off */, -1, -1, -1, -1 /* Bounds */, -1, -1, -1, -1 /* Insets */, 0 /* ClusterHome */, -1 /* ClusterNone */"
+        },
+        {
+            "property": "Constants::VENDOR_CLUSTER_REQUEST_DISPLAY",
+            "defaultValue": {
+                "int32Values": [
+                    0
+                ]
+            },
+            "access": "VehiclePropertyAccess::READ",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE",
+            "comment": "0 means ClusterHome"
+        },
+        {
+            "property": "Constants::VENDOR_CLUSTER_NAVIGATION_STATE",
+            "access": "VehiclePropertyAccess::READ",
+            "changeMode": "VehiclePropertyChangeMode::ON_CHANGE"
+        }
+    ]
+}
\ No newline at end of file
diff --git a/automotive/vehicle/aidl/impl/default_config/include/DefaultConfig.h b/automotive/vehicle/aidl/impl/default_config/include/DefaultConfig.h
index e00f775..1357f20 100644
--- a/automotive/vehicle/aidl/impl/default_config/include/DefaultConfig.h
+++ b/automotive/vehicle/aidl/impl/default_config/include/DefaultConfig.h
@@ -36,6 +36,7 @@
 using ::aidl::android::hardware::automotive::vehicle::EvsServiceState;
 using ::aidl::android::hardware::automotive::vehicle::EvsServiceType;
 using ::aidl::android::hardware::automotive::vehicle::FuelType;
+using ::aidl::android::hardware::automotive::vehicle::GsrComplianceRequirementType;
 using ::aidl::android::hardware::automotive::vehicle::RawPropValues;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReport;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReq;
@@ -173,6 +174,17 @@
 
         {.config =
                  {
+                         .prop = toInt(VehicleProperty::EV_BATTERY_DISPLAY_UNITS),
+                         .access = VehiclePropertyAccess::READ_WRITE,
+                         .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+                         .configArray = {toInt(VehicleUnit::WATT_HOUR),
+                                         toInt(VehicleUnit::AMPERE_HOURS),
+                                         toInt(VehicleUnit::KILOWATT_HOUR)},
+                 },
+         .initialValue = {.int32Values = {toInt(VehicleUnit::KILOWATT_HOUR)}}},
+
+        {.config =
+                 {
                          .prop = toInt(VehicleProperty::SEAT_OCCUPANCY),
                          .access = VehiclePropertyAccess::READ,
                          .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
@@ -352,8 +364,9 @@
                          .prop = toInt(VehicleProperty::VEHICLE_CURB_WEIGHT),
                          .access = VehiclePropertyAccess::READ,
                          .changeMode = VehiclePropertyChangeMode::STATIC,
+                         .configArray = {/*gross weight kg=*/2948},
                  },
-         .initialValue = {.int32Values = {30}}},
+         .initialValue = {.int32Values = {2211 /*kg*/}}},
 
         {.config =
                  {
@@ -460,6 +473,24 @@
 
         {.config =
                  {
+                         .prop = toInt(VehicleProperty::FUEL_VOLUME_DISPLAY_UNITS),
+                         .access = VehiclePropertyAccess::READ_WRITE,
+                         .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+                         .configArray = {(int)VehicleUnit::LITER, (int)VehicleUnit::US_GALLON},
+                 },
+         .initialValue = {.int32Values = {(int)VehicleUnit::LITER}}},
+
+        {.config =
+                 {
+                         .prop = toInt(
+                                 VehicleProperty::FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME),
+                         .access = VehiclePropertyAccess::READ_WRITE,
+                         .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
+                 },
+         .initialValue = {.int32Values = {1}}},
+
+        {.config =
+                 {
                          .prop = toInt(VehicleProperty::HW_KEY_INPUT),
                          .access = VehiclePropertyAccess::READ,
                          .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
@@ -715,6 +746,16 @@
 
         {.config =
                  {
+                         .prop = toInt(VehicleProperty::ENGINE_COOLANT_TEMP),
+                         .access = VehiclePropertyAccess::READ,
+                         .changeMode = VehiclePropertyChangeMode::CONTINUOUS,
+                         .minSampleRate = 1.0f,
+                         .maxSampleRate = 10.0f,
+                 },
+         .initialValue = {.floatValues = {75.0f}}},
+
+        {.config =
+                 {
                          .prop = toInt(VehicleProperty::ENGINE_OIL_LEVEL),
                          .access = VehiclePropertyAccess::READ,
                          .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
@@ -826,7 +867,7 @@
         {.config = {.prop = toInt(VehicleProperty::AP_POWER_STATE_REQ),
                     .access = VehiclePropertyAccess::READ,
                     .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
-                    .configArray = {3}}},
+                    .configArray = {0}}},
 
         {.config = {.prop = toInt(VehicleProperty::AP_POWER_STATE_REPORT),
                     .access = VehiclePropertyAccess::READ_WRITE,
@@ -884,14 +925,6 @@
 
         {.config =
                  {
-                         .prop = toInt(VehicleProperty::FOG_LIGHTS_STATE),
-                         .access = VehiclePropertyAccess::READ,
-                         .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
-                 },
-         .initialValue = {.int32Values = {LIGHT_STATE_ON}}},
-
-        {.config =
-                 {
                          .prop = toInt(VehicleProperty::FRONT_FOG_LIGHTS_STATE),
                          .access = VehiclePropertyAccess::READ,
                          .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
@@ -930,14 +963,7 @@
                  },
          .initialValue = {.int32Values = {LIGHT_SWITCH_AUTO}}},
 
-        {.config =
-                 {
-                         .prop = toInt(VehicleProperty::FOG_LIGHTS_SWITCH),
-                         .access = VehiclePropertyAccess::READ_WRITE,
-                         .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
-                 },
-         .initialValue = {.int32Values = {LIGHT_SWITCH_AUTO}}},
-
+        // FOG_LIGHTS_SWITCH must not be implemented when FRONT_FOG_LIGHTS_SWITCH is implemented
         {.config =
                  {
                          .prop = toInt(VehicleProperty::FRONT_FOG_LIGHTS_SWITCH),
@@ -946,6 +972,7 @@
                  },
          .initialValue = {.int32Values = {LIGHT_SWITCH_AUTO}}},
 
+        // FOG_LIGHTS_SWITCH must not be implemented when REAR_FOG_LIGHTS_SWITCH is implemented
         {.config =
                  {
                          .prop = toInt(VehicleProperty::REAR_FOG_LIGHTS_SWITCH),
@@ -1236,6 +1263,19 @@
                                 .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
                         },
         },
+        {
+                .config =
+                        {
+                                .prop = toInt(
+                                        VehicleProperty::
+                                                GENERAL_SAFETY_REGULATION_COMPLIANCE_REQUIREMENT),
+                                .access = VehiclePropertyAccess::READ,
+                                .changeMode = VehiclePropertyChangeMode::STATIC,
+                        },
+                .initialValue = {.int32Values = {toInt(
+                                         GsrComplianceRequirementType::
+                                                 GSR_COMPLIANCE_REQUIRED_THROUGH_SYSTEM_IMAGE)}},
+        },
 #ifdef ENABLE_VENDOR_CLUSTER_PROPERTY_FOR_TESTING
         // Vendor propetry for E2E ClusterHomeService testing.
         {
diff --git a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/GeneratorHub.h b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/GeneratorHub.h
index 9f112ae..f96b6ec 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/GeneratorHub.h
+++ b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/GeneratorHub.h
@@ -54,8 +54,8 @@
     void registerGenerator(int32_t generatorId, std::unique_ptr<FakeValueGenerator> generator);
 
     // Unregister a generator with the generatorId. If no registered generator is found, this
-    // function does nothing.
-    void unregisterGenerator(int32_t generatorId);
+    // function does nothing. Returns true if the generator is unregistered.
+    bool unregisterGenerator(int32_t generatorId);
 
   private:
     struct VhalEvent {
diff --git a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/JsonFakeValueGenerator.h b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/JsonFakeValueGenerator.h
index d421ac5..42b1bd3 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/JsonFakeValueGenerator.h
+++ b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/include/JsonFakeValueGenerator.h
@@ -45,6 +45,9 @@
     // Create a new JSON fake value generator using the specified JSON file path. All the events
     // in the JSON file would be generated once.
     explicit JsonFakeValueGenerator(const std::string& path);
+    // Create a new JSON fake value generator using the JSON content. The first argument is just
+    // used to differentiate this function with the one that takes path as input.
+    explicit JsonFakeValueGenerator(bool unused, const std::string& content, int32_t iteration);
 
     ~JsonFakeValueGenerator() = default;
 
@@ -53,6 +56,9 @@
     const std::vector<aidl::android::hardware::automotive::vehicle::VehiclePropValue>&
     getAllEvents();
 
+    // Whether there are events left to replay for this generator.
+    bool hasNext();
+
   private:
     size_t mEventIndex = 0;
     std::vector<aidl::android::hardware::automotive::vehicle::VehiclePropValue> mEvents;
@@ -60,7 +66,8 @@
     int32_t mNumOfIterations = 0;
 
     void setBit(std::vector<uint8_t>& bytes, size_t idx);
-    void init(const std::string& path, int32_t iteration);
+    void initWithPath(const std::string& path, int32_t iteration);
+    void initWithStream(std::istream& is, int32_t iteration);
 };
 
 }  // namespace fake
diff --git a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/GeneratorHub.cpp b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/GeneratorHub.cpp
index 0c182d9..d815456 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/GeneratorHub.cpp
+++ b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/GeneratorHub.cpp
@@ -29,11 +29,18 @@
 
 using ::android::base::ScopedLockAssertion;
 
-GeneratorHub::GeneratorHub(OnHalEvent&& onHalEvent)
-    : mOnHalEvent(onHalEvent), mThread(&GeneratorHub::run, this) {}
+GeneratorHub::GeneratorHub(OnHalEvent&& onHalEvent) : mOnHalEvent(onHalEvent) {
+    mThread = std::thread(&GeneratorHub::run, this);
+}
 
 GeneratorHub::~GeneratorHub() {
-    mShuttingDownFlag.store(true);
+    {
+        // Even if the shared variable is atomic, it must be modified under the
+        // mutex in order to correctly publish the modification to the waiting
+        // thread.
+        std::unique_lock<std::mutex> lock(mGeneratorsLock);
+        mShuttingDownFlag.store(true);
+    }
     mCond.notify_all();
     if (mThread.joinable()) {
         mThread.join();
@@ -58,13 +65,15 @@
     mCond.notify_one();
 }
 
-void GeneratorHub::unregisterGenerator(int32_t id) {
+bool GeneratorHub::unregisterGenerator(int32_t id) {
+    bool removed;
     {
         std::scoped_lock<std::mutex> lockGuard(mGeneratorsLock);
-        mGenerators.erase(id);
+        removed = mGenerators.erase(id);
     }
     mCond.notify_one();
     ALOGI("%s: Unregistered generator, id: %d", __func__, id);
+    return removed;
 }
 
 void GeneratorHub::run() {
diff --git a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/JsonFakeValueGenerator.cpp b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/JsonFakeValueGenerator.cpp
index d4d52a5..cb42317 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/JsonFakeValueGenerator.cpp
+++ b/automotive/vehicle/aidl/impl/fake_impl/GeneratorHub/src/JsonFakeValueGenerator.cpp
@@ -173,12 +173,11 @@
 
 }  // namespace
 
-JsonFakeValueGenerator::JsonFakeValueGenerator(const std::string& path) {
-    init(path, 1);
-}
+JsonFakeValueGenerator::JsonFakeValueGenerator(const std::string& path)
+    : JsonFakeValueGenerator(path, /*iteration=*/1) {}
 
 JsonFakeValueGenerator::JsonFakeValueGenerator(const std::string& path, int32_t iteration) {
-    init(path, iteration);
+    initWithPath(path, iteration);
 }
 
 JsonFakeValueGenerator::JsonFakeValueGenerator(const VehiclePropValue& request) {
@@ -186,16 +185,26 @@
     // Iterate infinitely if iteration number is not provided
     int32_t numOfIterations = v.int32Values.size() < 2 ? -1 : v.int32Values[1];
 
-    init(v.stringValue, numOfIterations);
+    initWithPath(v.stringValue, numOfIterations);
 }
 
-void JsonFakeValueGenerator::init(const std::string& path, int32_t iteration) {
+JsonFakeValueGenerator::JsonFakeValueGenerator([[maybe_unused]] bool unused,
+                                               const std::string& content, int32_t iteration) {
+    std::istringstream iss(content);
+    initWithStream(iss, iteration);
+}
+
+void JsonFakeValueGenerator::initWithPath(const std::string& path, int32_t iteration) {
     std::ifstream ifs(path);
     if (!ifs) {
         ALOGE("%s: couldn't open %s for parsing.", __func__, path.c_str());
         return;
     }
-    mEvents = parseFakeValueJson(ifs);
+    initWithStream(ifs, iteration);
+}
+
+void JsonFakeValueGenerator::initWithStream(std::istream& is, int32_t iteration) {
+    mEvents = parseFakeValueJson(is);
     mNumOfIterations = iteration;
 }
 
@@ -235,12 +244,15 @@
             mNumOfIterations--;
         }
     }
-
     generatedValue.timestamp = mLastEventTimestamp;
 
     return generatedValue;
 }
 
+bool JsonFakeValueGenerator::hasNext() {
+    return mNumOfIterations != 0 && mEvents.size() > 0;
+}
+
 }  // namespace fake
 }  // namespace vehicle
 }  // namespace automotive
diff --git a/automotive/vehicle/aidl/impl/fake_impl/README.md b/automotive/vehicle/aidl/impl/fake_impl/README.md
new file mode 100644
index 0000000..e86dcee
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/fake_impl/README.md
@@ -0,0 +1,28 @@
+# Fake reference AIDL VHAL implementation libraries
+---
+
+This directory stores libraries for implementing a fake reference AIDL VHAL.
+
+WARNING: All the libraries here are for TEST ONLY.
+
+## GeneratorHub
+
+Defines a library `FakeVehicleHalValueGenerators` that could generate fake
+vehicle property values for testing.
+
+## hardware
+
+Defines a fake implementation for device-specifc interface `IVehicleHardware`:
+`FakeVehicleHardware`. This implementation uses a in-memory map for storing
+property values and does not communicate with or depending on any specific
+vehicle bus.
+
+## obd2frame
+
+Defines a library `FakeObd2Frame` that generates fake OBD2 frame for OBD2
+properties.
+
+## userhal
+
+Defines a library `FakeUserHal` that emulates a real User HAL behavior by
+parsing debug commands.
diff --git a/automotive/vehicle/aidl/impl/fake_impl/hardware/include/FakeVehicleHardware.h b/automotive/vehicle/aidl/impl/fake_impl/hardware/include/FakeVehicleHardware.h
index 34b2b24..8cc19b1 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/hardware/include/FakeVehicleHardware.h
+++ b/automotive/vehicle/aidl/impl/fake_impl/hardware/include/FakeVehicleHardware.h
@@ -21,10 +21,12 @@
 #include <DefaultConfig.h>
 #include <FakeObd2Frame.h>
 #include <FakeUserHal.h>
+#include <GeneratorHub.h>
 #include <IVehicleHardware.h>
 #include <RecurrentTimer.h>
 #include <VehicleHalTypes.h>
 #include <VehiclePropertyStore.h>
+#include <aidl/android/hardware/automotive/vehicle/VehicleHwKeyInputAction.h>
 #include <android-base/parseint.h>
 #include <android-base/result.h>
 #include <android-base/stringprintf.h>
@@ -132,11 +134,15 @@
     const std::unique_ptr<FakeUserHal> mFakeUserHal;
     // RecurrentTimer is thread-safe.
     std::unique_ptr<RecurrentTimer> mRecurrentTimer;
+    // GeneratorHub is thread-safe.
+    std::unique_ptr<GeneratorHub> mGeneratorHub;
     std::mutex mLock;
     std::unique_ptr<const PropertyChangeCallback> mOnPropertyChangeCallback GUARDED_BY(mLock);
     std::unique_ptr<const PropertySetErrorCallback> mOnPropertySetErrorCallback GUARDED_BY(mLock);
     std::unordered_map<PropIdAreaId, std::shared_ptr<RecurrentTimer::Callback>, PropIdAreaIdHash>
             mRecurrentActions GUARDED_BY(mLock);
+    std::unordered_map<PropIdAreaId, VehiclePropValuePool::RecyclableType, PropIdAreaIdHash>
+            mSavedProps GUARDED_BY(mLock);
     // PendingRequestHandler is thread-safe.
     mutable PendingRequestHandler<GetValuesCallback,
                                   aidl::android::hardware::automotive::vehicle::GetValueRequest>
@@ -156,6 +162,10 @@
     void maybeOverrideProperties(const char* overrideDir);
     // Override the properties using config files in 'overrideDir'.
     void overrideProperties(const char* overrideDir);
+    // Function to be called when a value change event comes from vehicle bus. In our fake
+    // implementation, this function is only called during "--inject-event" dump command.
+    void eventFromVehicleBus(
+            const aidl::android::hardware::automotive::vehicle::VehiclePropValue& value);
 
     VhalResult<void> maybeSetSpecialValue(
             const aidl::android::hardware::automotive::vehicle::VehiclePropValue& value,
@@ -184,6 +194,10 @@
     std::string dumpListProperties();
     std::string dumpSpecificProperty(const std::vector<std::string>& options);
     std::string dumpSetProperties(const std::vector<std::string>& options);
+    std::string dumpGetPropertyWithArg(const std::vector<std::string>& options);
+    std::string dumpSaveProperty(const std::vector<std::string>& options);
+    std::string dumpRestoreProperty(const std::vector<std::string>& options);
+    std::string dumpInjectEvent(const std::vector<std::string>& options);
 
     template <typename T>
     android::base::Result<T> safelyParseInt(int index, const std::string& s) {
@@ -198,7 +212,7 @@
     std::vector<std::string> getOptionValues(const std::vector<std::string>& options,
                                              size_t* index);
     android::base::Result<aidl::android::hardware::automotive::vehicle::VehiclePropValue>
-    parseSetPropOptions(const std::vector<std::string>& options);
+    parsePropOptions(const std::vector<std::string>& options);
     android::base::Result<std::vector<uint8_t>> parseHexString(const std::string& s);
 
     android::base::Result<void> checkArgumentsSize(const std::vector<std::string>& options,
@@ -207,6 +221,14 @@
             const aidl::android::hardware::automotive::vehicle::GetValueRequest& request);
     aidl::android::hardware::automotive::vehicle::SetValueResult handleSetValueRequest(
             const aidl::android::hardware::automotive::vehicle::SetValueRequest& request);
+
+    std::string genFakeDataCommand(const std::vector<std::string>& options);
+
+    static aidl::android::hardware::automotive::vehicle::VehiclePropValue createHwInputKeyProp(
+            aidl::android::hardware::automotive::vehicle::VehicleHwKeyInputAction action,
+            int32_t keyCode, int32_t targetDisplay);
+    static std::string genFakeDataHelp();
+    static std::string parseErrMsg(std::string fieldName, std::string value, std::string type);
 };
 
 }  // namespace fake
diff --git a/automotive/vehicle/aidl/impl/fake_impl/hardware/src/FakeVehicleHardware.cpp b/automotive/vehicle/aidl/impl/fake_impl/hardware/src/FakeVehicleHardware.cpp
index b64c1a6..7c451fe 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/hardware/src/FakeVehicleHardware.cpp
+++ b/automotive/vehicle/aidl/impl/fake_impl/hardware/src/FakeVehicleHardware.cpp
@@ -22,6 +22,7 @@
 #include <DefaultConfig.h>
 #include <FakeObd2Frame.h>
 #include <JsonFakeValueGenerator.h>
+#include <LinearFakeValueGenerator.h>
 #include <PropertyUtils.h>
 #include <TestPropertyUtils.h>
 #include <VehicleHalTypes.h>
@@ -33,6 +34,7 @@
 #include <utils/SystemClock.h>
 
 #include <dirent.h>
+#include <inttypes.h>
 #include <sys/types.h>
 #include <fstream>
 #include <regex>
@@ -55,6 +57,7 @@
 using ::aidl::android::hardware::automotive::vehicle::StatusCode;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReport;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReq;
+using ::aidl::android::hardware::automotive::vehicle::VehicleHwKeyInputAction;
 using ::aidl::android::hardware::automotive::vehicle::VehiclePropConfig;
 using ::aidl::android::hardware::automotive::vehicle::VehicleProperty;
 using ::aidl::android::hardware::automotive::vehicle::VehiclePropertyGroup;
@@ -64,6 +67,7 @@
 
 using ::android::base::EqualsIgnoreCase;
 using ::android::base::Error;
+using ::android::base::GetIntProperty;
 using ::android::base::ParseFloat;
 using ::android::base::Result;
 using ::android::base::ScopedLockAssertion;
@@ -72,6 +76,7 @@
 
 const char* VENDOR_OVERRIDE_DIR = "/vendor/etc/automotive/vhaloverride/";
 const char* OVERRIDE_PROPERTY = "persist.vendor.vhal_init_value_override";
+const char* POWER_STATE_REQ_CONFIG_PROPERTY = "ro.vendor.fake_vhal.ap_power_state_req.config";
 
 // A list of supported options for "--set" command.
 const std::unordered_set<std::string> SET_PROP_OPTIONS = {
@@ -86,7 +91,9 @@
         // bytes in hex format, e.g. 0xDEADBEEF.
         "-b",
         // Area id in integer.
-        "-a"};
+        "-a",
+        // Timestamp in int64.
+        "-t"};
 
 }  // namespace
 
@@ -140,6 +147,8 @@
       mFakeObd2Frame(new obd2frame::FakeObd2Frame(mServerSidePropStore)),
       mFakeUserHal(new FakeUserHal(mValuePool)),
       mRecurrentTimer(new RecurrentTimer()),
+      mGeneratorHub(new GeneratorHub(
+              [this](const VehiclePropValue& value) { eventFromVehicleBus(value); })),
       mPendingGetValueRequests(this),
       mPendingSetValueRequests(this) {
     init();
@@ -148,6 +157,7 @@
 FakeVehicleHardware::~FakeVehicleHardware() {
     mPendingGetValueRequests.stop();
     mPendingSetValueRequests.stop();
+    mGeneratorHub.reset();
 }
 
 void FakeVehicleHardware::init() {
@@ -155,7 +165,10 @@
         VehiclePropConfig cfg = it.config;
         VehiclePropertyStore::TokenFunction tokenFunction = nullptr;
 
-        if (cfg.prop == OBD2_FREEZE_FRAME) {
+        if (cfg.prop == toInt(VehicleProperty::AP_POWER_STATE_REQ)) {
+            int config = GetIntProperty(POWER_STATE_REQ_CONFIG_PROPERTY, /*default_value=*/0);
+            cfg.configArray[0] = config;
+        } else if (cfg.prop == OBD2_FREEZE_FRAME) {
             tokenFunction = [](const VehiclePropValue& propValue) { return propValue.timestamp; };
         }
 
@@ -217,17 +230,16 @@
             [[fallthrough]];
         case toInt(VehicleApPowerStateReport::WAIT_FOR_VHAL):
             // CPMS is in WAIT_FOR_VHAL state, simply move to ON and send back to HAL.
-            // Must erase existing state because in the case when Car Service crashes, the power
-            // state would already be ON when we receive WAIT_FOR_VHAL and thus new property change
-            // event would be generated. However, Car Service always expect a property change event
-            // even though there is not actual state change.
-            mServerSidePropStore->removeValuesForProperty(
-                    toInt(VehicleProperty::AP_POWER_STATE_REQ));
             prop = createApPowerStateReq(VehicleApPowerStateReq::ON);
 
-            // ALWAYS update status for generated property value
+            // ALWAYS update status for generated property value, and force a property update event
+            // because in the case when Car Service crashes, the power state would already be ON
+            // when we receive WAIT_FOR_VHAL and thus new property change event would be generated.
+            // However, Car Service always expect a property change event even though there is no
+            // actual state change.
             if (auto writeResult =
-                        mServerSidePropStore->writeValue(std::move(prop), /*updateStatus=*/true);
+                        mServerSidePropStore->writeValue(std::move(prop), /*updateStatus=*/true,
+                                                         VehiclePropertyStore::EventMode::ALWAYS);
                 !writeResult.ok()) {
                 return StatusError(getErrorCode(writeResult))
                        << "failed to write AP_POWER_STATE_REQ into property store, error: "
@@ -575,34 +587,237 @@
         result.buffer = dumpListProperties();
     } else if (EqualsIgnoreCase(option, "--get")) {
         result.buffer = dumpSpecificProperty(options);
+    } else if (EqualsIgnoreCase(option, "--getWithArg")) {
+        result.buffer = dumpGetPropertyWithArg(options);
     } else if (EqualsIgnoreCase(option, "--set")) {
         result.buffer = dumpSetProperties(options);
+    } else if (EqualsIgnoreCase(option, "--save-prop")) {
+        result.buffer = dumpSaveProperty(options);
+    } else if (EqualsIgnoreCase(option, "--restore-prop")) {
+        result.buffer = dumpRestoreProperty(options);
+    } else if (EqualsIgnoreCase(option, "--inject-event")) {
+        result.buffer = dumpInjectEvent(options);
     } else if (EqualsIgnoreCase(option, kUserHalDumpOption)) {
         if (options.size() == 1) {
             result.buffer = mFakeUserHal->showDumpHelp();
         } else {
             result.buffer = mFakeUserHal->dump(options[1]);
         }
+    } else if (EqualsIgnoreCase(option, "--genfakedata")) {
+        result.buffer = genFakeDataCommand(options);
     } else {
         result.buffer = StringPrintf("Invalid option: %s\n", option.c_str());
     }
     return result;
 }
 
+std::string FakeVehicleHardware::genFakeDataHelp() {
+    return R"(
+Generate Fake Data Usage:
+--genfakedata --startlinear [propID] [mValue] [cValue] [dispersion] [increment] [interval]: "
+Start a linear generator that generates event with floatValue within range:
+[mValue - disperson, mValue + dispersion].
+propID(int32): ID for the property to generate event for.
+mValue(float): The middle of the possible values for the property.
+cValue(float): The start value for the property, must be within the range.
+dispersion(float): The range the value can change.
+increment(float): The step the value would increase by for each generated event,
+if exceed the range, the value would loop back.
+interval(int64): The interval in nanoseconds the event would generate by.
+
+--genfakedata --stoplinear [propID(int32)]: Stop a linear generator
+
+--genfakedata --startjson --path [jsonFilePath] [repetition]:
+Start a JSON generator that would generate events according to a JSON file.
+jsonFilePath(string): The path to a JSON file. The JSON content must be in the format of
+[{
+    "timestamp": 1000000,
+    "areaId": 0,
+    "value": 8,
+    "prop": 289408000
+}, {...}]
+Each event in the JSON file would be generated by the same interval their timestamp is relative to
+the first event's timestamp.
+repetition(int32, optional): how many iterations the events would be generated. If it is not
+provided, it would iterate indefinitely.
+
+--genfakedata --startjson --content [jsonContent]: Start a JSON generator using the content.
+
+--genfakedata --stopjson [generatorID(string)]: Stop a JSON generator.
+
+--genfakedata --keypress [keyCode(int32)] [display[int32]]: Generate key press.
+
+)";
+}
+
+std::string FakeVehicleHardware::parseErrMsg(std::string fieldName, std::string value,
+                                             std::string type) {
+    return StringPrintf("failed to parse %s as %s: \"%s\"\n%s", fieldName.c_str(), type.c_str(),
+                        value.c_str(), genFakeDataHelp().c_str());
+}
+
+std::string FakeVehicleHardware::genFakeDataCommand(const std::vector<std::string>& options) {
+    if (options.size() < 2) {
+        return "No subcommand specified for genfakedata\n" + genFakeDataHelp();
+    }
+
+    std::string command = options[1];
+    if (command == "--startlinear") {
+        // --genfakedata --startlinear [propID(int32)] [middleValue(float)]
+        // [currentValue(float)] [dispersion(float)] [increment(float)] [interval(int64)]
+        if (options.size() != 8) {
+            return "incorrect argument count, need 8 arguments for --genfakedata --startlinear\n" +
+                   genFakeDataHelp();
+        }
+        int32_t propId;
+        float middleValue;
+        float currentValue;
+        float dispersion;
+        float increment;
+        int64_t interval;
+        if (!android::base::ParseInt(options[2], &propId)) {
+            return parseErrMsg("propId", options[2], "int");
+        }
+        if (!android::base::ParseFloat(options[3], &middleValue)) {
+            return parseErrMsg("middleValue", options[3], "float");
+        }
+        if (!android::base::ParseFloat(options[4], &currentValue)) {
+            return parseErrMsg("currentValue", options[4], "float");
+        }
+        if (!android::base::ParseFloat(options[5], &dispersion)) {
+            return parseErrMsg("dispersion", options[5], "float");
+        }
+        if (!android::base::ParseFloat(options[6], &increment)) {
+            return parseErrMsg("increment", options[6], "float");
+        }
+        if (!android::base::ParseInt(options[7], &interval)) {
+            return parseErrMsg("interval", options[7], "int");
+        }
+        auto generator = std::make_unique<LinearFakeValueGenerator>(
+                propId, middleValue, currentValue, dispersion, increment, interval);
+        mGeneratorHub->registerGenerator(propId, std::move(generator));
+        return "Linear event generator started successfully";
+    } else if (command == "--stoplinear") {
+        // --genfakedata --stoplinear [propID(int32)]
+        if (options.size() != 3) {
+            return "incorrect argument count, need 3 arguments for --genfakedata --stoplinear\n" +
+                   genFakeDataHelp();
+        }
+        int32_t propId;
+        if (!android::base::ParseInt(options[2], &propId)) {
+            return parseErrMsg("propId", options[2], "int");
+        }
+        if (mGeneratorHub->unregisterGenerator(propId)) {
+            return "Linear event generator stopped successfully";
+        }
+        return StringPrintf("No linear event generator found for property: %d", propId);
+    } else if (command == "--startjson") {
+        // --genfakedata --startjson --path path repetition
+        // or
+        // --genfakedata --startjson --content content repetition.
+        if (options.size() != 4 && options.size() != 5) {
+            return "incorrect argument count, need 4 or 5 arguments for --genfakedata "
+                   "--startjson\n";
+        }
+        // Iterate infinitely if repetition number is not provided
+        int32_t repetition = -1;
+        if (options.size() == 5) {
+            if (!android::base::ParseInt(options[4], &repetition)) {
+                return parseErrMsg("repetition", options[4], "int");
+            }
+        }
+        std::unique_ptr<JsonFakeValueGenerator> generator;
+        if (options[2] == "--path") {
+            const std::string& fileName = options[3];
+            generator = std::make_unique<JsonFakeValueGenerator>(fileName, repetition);
+            if (!generator->hasNext()) {
+                return "invalid JSON file, no events";
+            }
+        } else if (options[2] == "--content") {
+            const std::string& content = options[3];
+            generator =
+                    std::make_unique<JsonFakeValueGenerator>(/*unused=*/true, content, repetition);
+            if (!generator->hasNext()) {
+                return "invalid JSON content, no events";
+            }
+        }
+        int32_t cookie = std::hash<std::string>()(options[3]);
+        mGeneratorHub->registerGenerator(cookie, std::move(generator));
+        return StringPrintf("JSON event generator started successfully, ID: %" PRId32, cookie);
+    } else if (command == "--stopjson") {
+        // --genfakedata --stopjson [generatorID(string)]
+        if (options.size() != 3) {
+            return "incorrect argument count, need 3 arguments for --genfakedata --stopjson\n";
+        }
+        int32_t cookie;
+        if (!android::base::ParseInt(options[2], &cookie)) {
+            return parseErrMsg("cookie", options[2], "int");
+        }
+        if (mGeneratorHub->unregisterGenerator(cookie)) {
+            return "JSON event generator stopped successfully";
+        } else {
+            return StringPrintf("No JSON event generator found for ID: %s", options[2].c_str());
+        }
+    } else if (command == "--keypress") {
+        int32_t keyCode;
+        int32_t display;
+        // --genfakedata --keypress [keyCode(int32)] [display[int32]]
+        if (options.size() != 4) {
+            return "incorrect argument count, need 4 arguments for --genfakedata --keypress\n";
+        }
+        if (!android::base::ParseInt(options[2], &keyCode)) {
+            return parseErrMsg("keyCode", options[2], "int");
+        }
+        if (!android::base::ParseInt(options[3], &display)) {
+            return parseErrMsg("display", options[3], "int");
+        }
+        // Send back to HAL
+        onValueChangeCallback(
+                createHwInputKeyProp(VehicleHwKeyInputAction::ACTION_DOWN, keyCode, display));
+        onValueChangeCallback(
+                createHwInputKeyProp(VehicleHwKeyInputAction::ACTION_UP, keyCode, display));
+        return "keypress event generated successfully";
+    }
+
+    return StringPrintf("Unknown command: \"%s\"\n%s", command.c_str(), genFakeDataHelp().c_str());
+}
+
+VehiclePropValue FakeVehicleHardware::createHwInputKeyProp(VehicleHwKeyInputAction action,
+                                                           int32_t keyCode, int32_t targetDisplay) {
+    VehiclePropValue value = {
+            .prop = toInt(VehicleProperty::HW_KEY_INPUT),
+            .areaId = 0,
+            .timestamp = elapsedRealtimeNano(),
+            .status = VehiclePropertyStatus::AVAILABLE,
+            .value.int32Values = {toInt(action), keyCode, targetDisplay},
+    };
+    return value;
+}
+
+void FakeVehicleHardware::eventFromVehicleBus(const VehiclePropValue& value) {
+    mServerSidePropStore->writeValue(mValuePool->obtain(value));
+}
+
 std::string FakeVehicleHardware::dumpHelp() {
     return "Usage: \n\n"
            "[no args]: dumps (id and value) all supported properties \n"
            "--help: shows this help\n"
            "--list: lists the ids of all supported properties\n"
-           "--get <PROP1> [PROP2] [PROPN]: dumps the value of specific properties \n"
-           "--set <PROP> [-i INT_VALUE [INT_VALUE ...]] [-i64 INT64_VALUE [INT64_VALUE ...]] "
-           "[-f FLOAT_VALUE [FLOAT_VALUE ...]] [-s STR_VALUE] "
-           "[-b BYTES_VALUE] [-a AREA_ID] : sets the value of property PROP. "
+           "--get <PROP1> [PROP2] [PROPN]: dumps the value of specific properties. \n"
+           "--getWithArg <PROP> [ValueArguments]: gets the value for a specific property with "
+           "arguments. \n"
+           "--set <PROP> [ValueArguments]: sets the value of property PROP. \n"
+           "--save-prop <prop> [-a AREA_ID]: saves the current value for PROP, integration test"
+           " that modifies prop value must call this before test and restore-prop after test. \n"
+           "--restore-prop <prop> [-a AREA_ID]: restores a previously saved property value. \n"
+           "--inject-event <PROP> [ValueArguments]: inject a property update event from car\n\n"
+           "ValueArguments are in the format of [-i INT_VALUE [INT_VALUE ...]] "
+           "[-i64 INT64_VALUE [INT64_VALUE ...]] [-f FLOAT_VALUE [FLOAT_VALUE ...]] [-s STR_VALUE] "
+           "[-b BYTES_VALUE] [-a AREA_ID].\n"
            "Notice that the string, bytes and area value can be set just once, while the other can"
            " have multiple values (so they're used in the respective array), "
-           "BYTES_VALUE is in the form of 0xXXXX, e.g. 0xdeadbeef.\n\n"
-           "Fake user HAL usage: \n" +
-           mFakeUserHal->showDumpHelp();
+           "BYTES_VALUE is in the form of 0xXXXX, e.g. 0xdeadbeef.\n" +
+           genFakeDataHelp() + "Fake user HAL usage: \n" + mFakeUserHal->showDumpHelp();
 }
 
 std::string FakeVehicleHardware::dumpAllProperties() {
@@ -720,10 +935,11 @@
     return std::move(values);
 }
 
-Result<VehiclePropValue> FakeVehicleHardware::parseSetPropOptions(
+Result<VehiclePropValue> FakeVehicleHardware::parsePropOptions(
         const std::vector<std::string>& options) {
     // Options format:
-    // --set PROP [-f f1 f2...] [-i i1 i2...] [-i64 i1 i2...] [-s s1 s2...] [-b b1 b2...] [-a a]
+    // --set/get/inject-event PROP [-f f1 f2...] [-i i1 i2...] [-i64 i1 i2...] [-s s1 s2...]
+    // [-b b1 b2...] [-a a] [-t timestamp]
     size_t optionIndex = 1;
     auto result = safelyParseInt<int32_t>(optionIndex, options[optionIndex]);
     if (!result.ok()) {
@@ -737,83 +953,98 @@
     std::unordered_set<std::string> parsedOptions;
 
     while (optionIndex < options.size()) {
-        std::string type = options[optionIndex];
+        std::string argType = options[optionIndex];
         optionIndex++;
+
         size_t currentIndex = optionIndex;
-        std::vector<std::string> values = getOptionValues(options, &optionIndex);
-        if (parsedOptions.find(type) != parsedOptions.end()) {
-            return Error() << StringPrintf("Duplicate \"%s\" options\n", type.c_str());
+        std::vector<std::string> argValues = getOptionValues(options, &optionIndex);
+        if (parsedOptions.find(argType) != parsedOptions.end()) {
+            return Error() << StringPrintf("Duplicate \"%s\" options\n", argType.c_str());
         }
-        parsedOptions.insert(type);
-        if (EqualsIgnoreCase(type, "-i")) {
-            if (values.size() == 0) {
+        parsedOptions.insert(argType);
+        size_t argValuesSize = argValues.size();
+        if (EqualsIgnoreCase(argType, "-i")) {
+            if (argValuesSize == 0) {
                 return Error() << "No values specified when using \"-i\"\n";
             }
-            prop.value.int32Values.resize(values.size());
-            for (size_t i = 0; i < values.size(); i++) {
-                auto int32Result = safelyParseInt<int32_t>(currentIndex + i, values[i]);
+            prop.value.int32Values.resize(argValuesSize);
+            for (size_t i = 0; i < argValuesSize; i++) {
+                auto int32Result = safelyParseInt<int32_t>(currentIndex + i, argValues[i]);
                 if (!int32Result.ok()) {
                     return Error()
                            << StringPrintf("Value: \"%s\" is not a valid int: %s\n",
-                                           values[i].c_str(), getErrorMsg(int32Result).c_str());
+                                           argValues[i].c_str(), getErrorMsg(int32Result).c_str());
                 }
                 prop.value.int32Values[i] = int32Result.value();
             }
-        } else if (EqualsIgnoreCase(type, "-i64")) {
-            if (values.size() == 0) {
+        } else if (EqualsIgnoreCase(argType, "-i64")) {
+            if (argValuesSize == 0) {
                 return Error() << "No values specified when using \"-i64\"\n";
             }
-            prop.value.int64Values.resize(values.size());
-            for (size_t i = 0; i < values.size(); i++) {
-                auto int64Result = safelyParseInt<int64_t>(currentIndex + i, values[i]);
+            prop.value.int64Values.resize(argValuesSize);
+            for (size_t i = 0; i < argValuesSize; i++) {
+                auto int64Result = safelyParseInt<int64_t>(currentIndex + i, argValues[i]);
                 if (!int64Result.ok()) {
                     return Error()
                            << StringPrintf("Value: \"%s\" is not a valid int64: %s\n",
-                                           values[i].c_str(), getErrorMsg(int64Result).c_str());
+                                           argValues[i].c_str(), getErrorMsg(int64Result).c_str());
                 }
                 prop.value.int64Values[i] = int64Result.value();
             }
-        } else if (EqualsIgnoreCase(type, "-f")) {
-            if (values.size() == 0) {
+        } else if (EqualsIgnoreCase(argType, "-f")) {
+            if (argValuesSize == 0) {
                 return Error() << "No values specified when using \"-f\"\n";
             }
-            prop.value.floatValues.resize(values.size());
-            for (size_t i = 0; i < values.size(); i++) {
-                auto floatResult = safelyParseFloat(currentIndex + i, values[i]);
+            prop.value.floatValues.resize(argValuesSize);
+            for (size_t i = 0; i < argValuesSize; i++) {
+                auto floatResult = safelyParseFloat(currentIndex + i, argValues[i]);
                 if (!floatResult.ok()) {
                     return Error()
                            << StringPrintf("Value: \"%s\" is not a valid float: %s\n",
-                                           values[i].c_str(), getErrorMsg(floatResult).c_str());
+                                           argValues[i].c_str(), getErrorMsg(floatResult).c_str());
                 }
                 prop.value.floatValues[i] = floatResult.value();
             }
-        } else if (EqualsIgnoreCase(type, "-s")) {
-            if (values.size() != 1) {
+        } else if (EqualsIgnoreCase(argType, "-s")) {
+            if (argValuesSize != 1) {
                 return Error() << "Expect exact one value when using \"-s\"\n";
             }
-            prop.value.stringValue = values[0];
-        } else if (EqualsIgnoreCase(type, "-b")) {
-            if (values.size() != 1) {
+            prop.value.stringValue = argValues[0];
+        } else if (EqualsIgnoreCase(argType, "-b")) {
+            if (argValuesSize != 1) {
                 return Error() << "Expect exact one value when using \"-b\"\n";
             }
-            auto bytesResult = parseHexString(values[0]);
+            auto bytesResult = parseHexString(argValues[0]);
             if (!bytesResult.ok()) {
                 return Error() << StringPrintf("value: \"%s\" is not a valid hex string: %s\n",
-                                               values[0].c_str(), getErrorMsg(bytesResult).c_str());
+                                               argValues[0].c_str(),
+                                               getErrorMsg(bytesResult).c_str());
             }
             prop.value.byteValues = std::move(bytesResult.value());
-        } else if (EqualsIgnoreCase(type, "-a")) {
-            if (values.size() != 1) {
+        } else if (EqualsIgnoreCase(argType, "-a")) {
+            if (argValuesSize != 1) {
                 return Error() << "Expect exact one value when using \"-a\"\n";
             }
-            auto int32Result = safelyParseInt<int32_t>(currentIndex, values[0]);
+            auto int32Result = safelyParseInt<int32_t>(currentIndex, argValues[0]);
             if (!int32Result.ok()) {
                 return Error() << StringPrintf("Area ID: \"%s\" is not a valid int: %s\n",
-                                               values[0].c_str(), getErrorMsg(int32Result).c_str());
+                                               argValues[0].c_str(),
+                                               getErrorMsg(int32Result).c_str());
             }
             prop.areaId = int32Result.value();
+        } else if (EqualsIgnoreCase(argType, "-t")) {
+            if (argValuesSize != 1) {
+                return Error() << "Expect exact one value when using \"-t\"\n";
+            }
+            auto int64Result = safelyParseInt<int64_t>(currentIndex, argValues[0]);
+            if (!int64Result.ok()) {
+                return Error() << StringPrintf("Timestamp: \"%s\" is not a valid int64: %s\n",
+                                               argValues[0].c_str(),
+                                               getErrorMsg(int64Result).c_str());
+            }
+            prop.timestamp = int64Result.value();
         } else {
-            return Error() << StringPrintf("Unknown option: %s\n", type.c_str());
+            return Error() << StringPrintf("Unknown option: %s\n", argType.c_str());
         }
     }
 
@@ -825,7 +1056,7 @@
         return getErrorMsg(result);
     }
 
-    auto parseResult = parseSetPropOptions(options);
+    auto parseResult = parsePropOptions(options);
     if (!parseResult.ok()) {
         return getErrorMsg(parseResult);
     }
@@ -848,6 +1079,123 @@
                         getErrorMsg(setResult).c_str());
 }
 
+std::string FakeVehicleHardware::dumpGetPropertyWithArg(const std::vector<std::string>& options) {
+    if (auto result = checkArgumentsSize(options, 3); !result.ok()) {
+        return getErrorMsg(result);
+    }
+
+    auto parseResult = parsePropOptions(options);
+    if (!parseResult.ok()) {
+        return getErrorMsg(parseResult);
+    }
+    VehiclePropValue prop = std::move(parseResult.value());
+    ALOGD("Dump: Getting property: %s", prop.toString().c_str());
+
+    bool isSpecialValue = false;
+    auto result = maybeGetSpecialValue(prop, &isSpecialValue);
+
+    if (!isSpecialValue) {
+        result = mServerSidePropStore->readValue(prop);
+    }
+
+    if (!result.ok()) {
+        return StringPrintf("failed to read property value: %d, error: %s, code: %d\n", prop.prop,
+                            getErrorMsg(result).c_str(), getIntErrorCode(result));
+    }
+    return StringPrintf("Get property result: %s\n", result.value()->toString().c_str());
+}
+
+std::string FakeVehicleHardware::dumpSaveProperty(const std::vector<std::string>& options) {
+    // Format: --save-prop PROP [-a areaID]
+    if (auto result = checkArgumentsSize(options, 2); !result.ok()) {
+        return getErrorMsg(result);
+    }
+
+    auto parseResult = parsePropOptions(options);
+    if (!parseResult.ok()) {
+        return getErrorMsg(parseResult);
+    }
+    // We are only using the prop and areaId option.
+    VehiclePropValue value = std::move(parseResult.value());
+    int32_t propId = value.prop;
+    int32_t areaId = value.areaId;
+
+    auto readResult = mServerSidePropStore->readValue(value);
+    if (!readResult.ok()) {
+        return StringPrintf("Failed to save current property value, error: %s",
+                            getErrorMsg(readResult).c_str());
+    }
+
+    std::scoped_lock<std::mutex> lockGuard(mLock);
+    mSavedProps[PropIdAreaId{
+            .propId = propId,
+            .areaId = areaId,
+    }] = std::move(readResult.value());
+
+    return StringPrintf("Property: %" PRId32 ", areaID: %" PRId32 " saved", propId, areaId);
+}
+
+std::string FakeVehicleHardware::dumpRestoreProperty(const std::vector<std::string>& options) {
+    // Format: --restore-prop PROP [-a areaID]
+    if (auto result = checkArgumentsSize(options, 2); !result.ok()) {
+        return getErrorMsg(result);
+    }
+
+    auto parseResult = parsePropOptions(options);
+    if (!parseResult.ok()) {
+        return getErrorMsg(parseResult);
+    }
+    // We are only using the prop and areaId option.
+    VehiclePropValue value = std::move(parseResult.value());
+    int32_t propId = value.prop;
+    int32_t areaId = value.areaId;
+    VehiclePropValuePool::RecyclableType savedValue;
+
+    {
+        std::scoped_lock<std::mutex> lockGuard(mLock);
+        auto it = mSavedProps.find(PropIdAreaId{
+                .propId = propId,
+                .areaId = areaId,
+        });
+        if (it == mSavedProps.end()) {
+            return StringPrintf("No saved property for property: %" PRId32 ", areaID: %" PRId32,
+                                propId, areaId);
+        }
+
+        savedValue = std::move(it->second);
+        // Remove the saved property after restoring it.
+        mSavedProps.erase(it);
+    }
+
+    // Update timestamp.
+    savedValue->timestamp = elapsedRealtimeNano();
+
+    auto writeResult = mServerSidePropStore->writeValue(std::move(savedValue));
+    if (!writeResult.ok()) {
+        return StringPrintf("Failed to restore property value, error: %s",
+                            getErrorMsg(writeResult).c_str());
+    }
+
+    return StringPrintf("Property: %" PRId32 ", areaID: %" PRId32 " restored", propId, areaId);
+}
+
+std::string FakeVehicleHardware::dumpInjectEvent(const std::vector<std::string>& options) {
+    if (auto result = checkArgumentsSize(options, 3); !result.ok()) {
+        return getErrorMsg(result);
+    }
+
+    auto parseResult = parsePropOptions(options);
+    if (!parseResult.ok()) {
+        return getErrorMsg(parseResult);
+    }
+    VehiclePropValue prop = std::move(parseResult.value());
+    ALOGD("Dump: Injecting event from vehicle bus: %s", prop.toString().c_str());
+
+    eventFromVehicleBus(prop);
+
+    return StringPrintf("Event for property: %d injected", prop.prop);
+}
+
 StatusCode FakeVehicleHardware::checkHealth() {
     // Always return OK for checkHealth.
     return StatusCode::OK;
@@ -894,10 +1242,10 @@
             return;
         }
         result.value()->timestamp = elapsedRealtimeNano();
-        // Must remove the value before writing, otherwise, we would generate no update event since
-        // the value is the same.
-        mServerSidePropStore->removeValue(*result.value());
-        mServerSidePropStore->writeValue(std::move(result.value()));
+        // For continuous properties, we must generate a new onPropertyChange event periodically
+        // according to the sample rate.
+        mServerSidePropStore->writeValue(std::move(result.value()), /*updateStatus=*/true,
+                                         VehiclePropertyStore::EventMode::ALWAYS);
     });
     mRecurrentTimer->registerTimerCallback(interval, action);
     mRecurrentActions[propIdAreaId] = action;
diff --git a/automotive/vehicle/aidl/impl/fake_impl/hardware/test/Android.bp b/automotive/vehicle/aidl/impl/fake_impl/hardware/test/Android.bp
index 90d1516..cfd6577 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/hardware/test/Android.bp
+++ b/automotive/vehicle/aidl/impl/fake_impl/hardware/test/Android.bp
@@ -42,6 +42,7 @@
     ],
     data: [
         ":FakeVehicleHardwareTestOverrideJson",
+        ":FakeVehicleHardwareTestPropJson",
     ],
     defaults: ["VehicleHalDefaults"],
     test_suites: ["device-tests"],
@@ -51,3 +52,8 @@
     name: "FakeVehicleHardwareTestOverrideJson",
     srcs: ["override/*"],
 }
+
+filegroup {
+    name: "FakeVehicleHardwareTestPropJson",
+    srcs: ["prop.json"],
+}
diff --git a/automotive/vehicle/aidl/impl/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp b/automotive/vehicle/aidl/impl/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp
index 3e8f634..ab6bf51 100644
--- a/automotive/vehicle/aidl/impl/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp
+++ b/automotive/vehicle/aidl/impl/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp
@@ -53,6 +53,7 @@
 using ::aidl::android::hardware::automotive::vehicle::StatusCode;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReport;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReq;
+using ::aidl::android::hardware::automotive::vehicle::VehicleHwKeyInputAction;
 using ::aidl::android::hardware::automotive::vehicle::VehiclePropConfig;
 using ::aidl::android::hardware::automotive::vehicle::VehicleProperty;
 using ::aidl::android::hardware::automotive::vehicle::VehiclePropertyStatus;
@@ -64,6 +65,7 @@
 using ::testing::ContainerEq;
 using ::testing::ContainsRegex;
 using ::testing::Eq;
+using ::testing::HasSubstr;
 using ::testing::WhenSortedBy;
 
 using std::chrono::milliseconds;
@@ -87,6 +89,7 @@
 class FakeVehicleHardwareTest : public ::testing::Test {
   protected:
     void SetUp() override {
+        mHardware = std::make_unique<FakeVehicleHardware>();
         auto callback = std::make_unique<IVehicleHardware::PropertyChangeCallback>(
                 [this](const std::vector<VehiclePropValue>& values) {
                     onPropertyChangeEvent(values);
@@ -98,7 +101,13 @@
                 [this](std::vector<GetValueResult> results) { onGetValues(results); });
     }
 
-    FakeVehicleHardware* getHardware() { return &mHardware; }
+    void TearDown() override {
+        // mHardware uses callback which contains reference to 'this', so it has to be destroyed
+        // before 'this'.
+        mHardware.reset();
+    }
+
+    FakeVehicleHardware* getHardware() { return mHardware.get(); }
 
     StatusCode setValues(const std::vector<SetValueRequest>& requests) {
         {
@@ -251,6 +260,14 @@
         return mChangedProperties;
     }
 
+    bool waitForChangedProperties(size_t count, milliseconds timeout) {
+        std::unique_lock<std::mutex> lk(mLock);
+        return mCv.wait_for(lk, timeout, [this, count] {
+            ScopedLockAssertion lockAssertion(mLock);
+            return mChangedProperties.size() >= count;
+        });
+    }
+
     bool waitForChangedProperties(int32_t propId, int32_t areaId, size_t count,
                                   milliseconds timeout) {
         PropIdAreaId propIdAreaId{
@@ -270,6 +287,15 @@
         mChangedProperties.clear();
     }
 
+    size_t getEventCount(int32_t propId, int32_t areaId) {
+        PropIdAreaId propIdAreaId{
+                .propId = propId,
+                .areaId = areaId,
+        };
+        std::scoped_lock<std::mutex> lockGuard(mLock);
+        return mEventCount[propIdAreaId];
+    }
+
     static void addSetValueRequest(std::vector<SetValueRequest>& requests,
                                    std::vector<SetValueResult>& expectedResults, int64_t requestId,
                                    const VehiclePropValue& value, StatusCode expectedStatus) {
@@ -332,7 +358,7 @@
     } mPropValueCmp;
 
   private:
-    FakeVehicleHardware mHardware;
+    std::unique_ptr<FakeVehicleHardware> mHardware;
     std::shared_ptr<IVehicleHardware::SetValuesCallback> mSetValuesCallback;
     std::shared_ptr<IVehicleHardware::GetValuesCallback> mGetValuesCallback;
     std::condition_variable mCv;
@@ -1395,6 +1421,85 @@
     ASSERT_THAT(result.buffer, ContainsRegex("Invalid number of arguments"));
 }
 
+TEST_F(FakeVehicleHardwareTest, testDumpSpecificPropertyWithArg) {
+    auto getValueResult = getValue(VehiclePropValue{.prop = OBD2_FREEZE_FRAME_INFO});
+    ASSERT_TRUE(getValueResult.ok());
+    auto propValue = getValueResult.value();
+    ASSERT_EQ(propValue.value.int64Values.size(), static_cast<size_t>(3))
+            << "expect 3 obd2 freeze frames stored";
+
+    std::string propIdStr = StringPrintf("%d", OBD2_FREEZE_FRAME);
+    DumpResult result;
+    for (int64_t timestamp : propValue.value.int64Values) {
+        result = getHardware()->dump(
+                {"--getWithArg", propIdStr, "-i64", StringPrintf("%" PRId64, timestamp)});
+
+        ASSERT_FALSE(result.callerShouldDumpState);
+        ASSERT_NE(result.buffer, "");
+        ASSERT_THAT(result.buffer, ContainsRegex("Get property result:"));
+    }
+
+    // Set the timestamp argument to 0.
+    result = getHardware()->dump({"--getWithArg", propIdStr, "-i64", "0"});
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    // There is no freeze obd2 frame at timestamp 0.
+    ASSERT_THAT(result.buffer, ContainsRegex("failed to read property value"));
+}
+
+TEST_F(FakeVehicleHardwareTest, testSaveRestoreProp) {
+    int32_t prop = toInt(VehicleProperty::TIRE_PRESSURE);
+    std::string propIdStr = std::to_string(prop);
+    std::string areaIdStr = std::to_string(WHEEL_FRONT_LEFT);
+
+    DumpResult result = getHardware()->dump({"--save-prop", propIdStr, "-a", areaIdStr});
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, ContainsRegex("saved"));
+
+    ASSERT_EQ(setValue(VehiclePropValue{
+                      .prop = prop,
+                      .areaId = WHEEL_FRONT_LEFT,
+                      .value =
+                              {
+                                      .floatValues = {210.0},
+                              },
+              }),
+              StatusCode::OK);
+
+    result = getHardware()->dump({"--restore-prop", propIdStr, "-a", areaIdStr});
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, ContainsRegex("restored"));
+
+    auto getResult = getValue(VehiclePropValue{.prop = prop, .areaId = WHEEL_FRONT_LEFT});
+
+    ASSERT_TRUE(getResult.ok());
+    // The default value is 200.0.
+    ASSERT_EQ(getResult.value().value.floatValues, std::vector<float>{200.0});
+}
+
+TEST_F(FakeVehicleHardwareTest, testDumpInjectEvent) {
+    int32_t prop = toInt(VehicleProperty::PERF_VEHICLE_SPEED);
+    std::string propIdStr = std::to_string(prop);
+
+    int64_t timestamp = elapsedRealtimeNano();
+    // Inject an event with float value 123.4 and timestamp.
+    DumpResult result = getHardware()->dump(
+            {"--inject-event", propIdStr, "-f", "123.4", "-t", std::to_string(timestamp)});
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer,
+                ContainsRegex(StringPrintf("Event for property: %d injected", prop)));
+    ASSERT_TRUE(waitForChangedProperties(prop, 0, /*count=*/1, milliseconds(1000)))
+            << "No changed event received for injected event from vehicle bus";
+    auto events = getChangedProperties();
+    ASSERT_EQ(events.size(), 1u);
+    auto event = events[0];
+    ASSERT_EQ(event.timestamp, timestamp);
+    ASSERT_EQ(event.value.floatValues, std::vector<float>({123.4}));
+}
+
 TEST_F(FakeVehicleHardwareTest, testDumpInvalidOptions) {
     std::vector<std::string> options;
     options.push_back("--invalid");
@@ -1606,6 +1711,260 @@
     ASSERT_EQ(3.402823466E+38f, value.value.floatValues[2]);
 }
 
+struct OptionsTestCase {
+    std::string name;
+    std::vector<std::string> options;
+    std::string expectMsg;
+};
+
+class FakeVehicleHardwareOptionsTest : public FakeVehicleHardwareTest,
+                                       public testing::WithParamInterface<OptionsTestCase> {};
+
+std::vector<OptionsTestCase> GenInvalidOptions() {
+    return {{"unknown_command", {"--unknown"}, "Invalid option: --unknown"},
+            {"help", {"--help"}, "Usage:"},
+            {"genfakedata_no_subcommand",
+             {"--genfakedata"},
+             "No subcommand specified for genfakedata"},
+            {"genfakedata_unknown_subcommand",
+             {"--genfakedata", "--unknown"},
+             "Unknown command: \"--unknown\""},
+            {"genfakedata_start_linear_no_args",
+             {"--genfakedata", "--startlinear"},
+             "incorrect argument count"},
+            {"genfakedata_start_linear_invalid_propId",
+             {"--genfakedata", "--startlinear", "abcd", "0.1", "0.1", "0.1", "0.1", "100000000"},
+             "failed to parse propId as int: \"abcd\""},
+            {"genfakedata_start_linear_invalid_middleValue",
+             {"--genfakedata", "--startlinear", "1", "abcd", "0.1", "0.1", "0.1", "100000000"},
+             "failed to parse middleValue as float: \"abcd\""},
+            {"genfakedata_start_linear_invalid_currentValue",
+             {"--genfakedata", "--startlinear", "1", "0.1", "abcd", "0.1", "0.1", "100000000"},
+             "failed to parse currentValue as float: \"abcd\""},
+            {"genfakedata_start_linear_invalid_dispersion",
+             {"--genfakedata", "--startlinear", "1", "0.1", "0.1", "abcd", "0.1", "100000000"},
+             "failed to parse dispersion as float: \"abcd\""},
+            {"genfakedata_start_linear_invalid_increment",
+             {"--genfakedata", "--startlinear", "1", "0.1", "0.1", "0.1", "abcd", "100000000"},
+             "failed to parse increment as float: \"abcd\""},
+            {"genfakedata_start_linear_invalid_interval",
+             {"--genfakedata", "--startlinear", "1", "0.1", "0.1", "0.1", "0.1", "0.1"},
+             "failed to parse interval as int: \"0.1\""},
+            {"genfakedata_stop_linear_no_args",
+             {"--genfakedata", "--stoplinear"},
+             "incorrect argument count"},
+            {"genfakedata_stop_linear_invalid_propId",
+             {"--genfakedata", "--stoplinear", "abcd"},
+             "failed to parse propId as int: \"abcd\""},
+            {"genfakedata_startjson_no_args",
+             {"--genfakedata", "--startjson"},
+             "incorrect argument count"},
+            {"genfakedata_startjson_invalid_repetition",
+             {"--genfakedata", "--startjson", "--path", "file", "0.1"},
+             "failed to parse repetition as int: \"0.1\""},
+            {"genfakedata_startjson_invalid_json_file",
+             {"--genfakedata", "--startjson", "--path", "file", "1"},
+             "invalid JSON file"},
+            {"genfakedata_stopjson_no_args",
+             {"--genfakedata", "--stopjson"},
+             "incorrect argument count"},
+            {"genfakedata_keypress_no_args",
+             {"--genfakedata", "--keypress"},
+             "incorrect argument count"},
+            {"genfakedata_keypress_invalid_keyCode",
+             {"--genfakedata", "--keypress", "0.1", "1"},
+             "failed to parse keyCode as int: \"0.1\""},
+            {"genfakedata_keypress_invalid_display",
+             {"--genfakedata", "--keypress", "1", "0.1"},
+             "failed to parse display as int: \"0.1\""}};
+}
+
+TEST_P(FakeVehicleHardwareOptionsTest, testInvalidOptions) {
+    auto tc = GetParam();
+
+    DumpResult result = getHardware()->dump(tc.options);
+
+    EXPECT_FALSE(result.callerShouldDumpState);
+    EXPECT_THAT(result.buffer, HasSubstr(tc.expectMsg));
+}
+
+INSTANTIATE_TEST_SUITE_P(
+        FakeVehicleHardwareOptionsTests, FakeVehicleHardwareOptionsTest,
+        testing::ValuesIn(GenInvalidOptions()),
+        [](const testing::TestParamInfo<FakeVehicleHardwareOptionsTest::ParamType>& info) {
+            return info.param.name;
+        });
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataLinear) {
+    // Start a fake linear data generator for vehicle speed at 0.1s interval.
+    // range: 0 - 100, current value: 30, step: 20.
+    std::string propIdString = StringPrintf("%d", toInt(VehicleProperty::PERF_VEHICLE_SPEED));
+    std::vector<std::string> options = {"--genfakedata",         "--startlinear", propIdString,
+                                        /*middleValue=*/"50",
+                                        /*currentValue=*/"30",
+                                        /*dispersion=*/"50",
+                                        /*increment=*/"20",
+                                        /*interval=*/"100000000"};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+
+    ASSERT_TRUE(waitForChangedProperties(toInt(VehicleProperty::PERF_VEHICLE_SPEED), 0, /*count=*/5,
+                                         milliseconds(1000)))
+            << "not enough events generated for linear data generator";
+
+    int32_t value = 30;
+    auto events = getChangedProperties();
+    for (size_t i = 0; i < 5; i++) {
+        ASSERT_EQ(1u, events[i].value.floatValues.size());
+        EXPECT_EQ(static_cast<float>(value), events[i].value.floatValues[0]);
+        value = (value + 20) % 100;
+    }
+
+    // Stop the linear generator.
+    options = {"--genfakedata", "--stoplinear", propIdString};
+
+    result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+
+    clearChangedProperties();
+    std::this_thread::sleep_for(std::chrono::milliseconds(200));
+
+    // There should be no new events generated.
+    EXPECT_EQ(0u, getEventCount(toInt(VehicleProperty::PERF_VEHICLE_SPEED), 0));
+}
+
+std::string getTestFilePath(const char* filename) {
+    static std::string baseDir = android::base::GetExecutableDirectory();
+    return baseDir + "/" + filename;
+}
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataJson) {
+    std::vector<std::string> options = {"--genfakedata", "--startjson", "--path",
+                                        getTestFilePath("prop.json"), "2"};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+
+    ASSERT_TRUE(waitForChangedProperties(/*count=*/8, milliseconds(1000)))
+            << "not enough events generated for JSON data generator";
+
+    auto events = getChangedProperties();
+    ASSERT_EQ(8u, events.size());
+    // First set of events, we test 1st and the last.
+    EXPECT_EQ(1u, events[0].value.int32Values.size());
+    EXPECT_EQ(8, events[0].value.int32Values[0]);
+    EXPECT_EQ(1u, events[3].value.int32Values.size());
+    EXPECT_EQ(10, events[3].value.int32Values[0]);
+    // Second set of the same events.
+    EXPECT_EQ(1u, events[4].value.int32Values.size());
+    EXPECT_EQ(8, events[4].value.int32Values[0]);
+    EXPECT_EQ(1u, events[7].value.int32Values.size());
+    EXPECT_EQ(10, events[7].value.int32Values[0]);
+}
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataJsonByContent) {
+    std::vector<std::string> options = {
+            "--genfakedata", "--startjson", "--content",
+            "[{\"timestamp\":1000000,\"areaId\":0,\"value\":8,\"prop\":289408000}]", "1"};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+
+    ASSERT_TRUE(waitForChangedProperties(/*count=*/1, milliseconds(1000)))
+            << "not enough events generated for JSON data generator";
+
+    auto events = getChangedProperties();
+    ASSERT_EQ(1u, events.size());
+    EXPECT_EQ(1u, events[0].value.int32Values.size());
+    EXPECT_EQ(8, events[0].value.int32Values[0]);
+}
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataJsonInvalidContent) {
+    std::vector<std::string> options = {"--genfakedata", "--startjson", "--content", "[{", "2"};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("invalid JSON content"));
+}
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataJsonInvalidFile) {
+    std::vector<std::string> options = {"--genfakedata", "--startjson", "--path",
+                                        getTestFilePath("blahblah.json"), "2"};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("invalid JSON file"));
+}
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataJsonStop) {
+    // No iteration number provided, would loop indefinitely.
+    std::vector<std::string> options = {"--genfakedata", "--startjson", "--path",
+                                        getTestFilePath("prop.json")};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+
+    std::string id = result.buffer.substr(result.buffer.find("ID: ") + 4);
+
+    result = getHardware()->dump({"--genfakedata", "--stopjson", id});
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+}
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataJsonStopInvalidFile) {
+    // No iteration number provided, would loop indefinitely.
+    std::vector<std::string> options = {"--genfakedata", "--startjson", "--path",
+                                        getTestFilePath("prop.json")};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+
+    result = getHardware()->dump({"--genfakedata", "--stopjson", "1234"});
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("No JSON event generator found"));
+
+    // TearDown function should destroy the generator which stops the iteration.
+}
+
+TEST_F(FakeVehicleHardwareTest, testDebugGenFakeDataKeyPress) {
+    std::vector<std::string> options = {"--genfakedata", "--keypress", "1", "2"};
+
+    DumpResult result = getHardware()->dump(options);
+
+    ASSERT_FALSE(result.callerShouldDumpState);
+    ASSERT_THAT(result.buffer, HasSubstr("successfully"));
+
+    auto events = getChangedProperties();
+    ASSERT_EQ(2u, events.size());
+    EXPECT_EQ(toInt(VehicleProperty::HW_KEY_INPUT), events[0].prop);
+    EXPECT_EQ(toInt(VehicleProperty::HW_KEY_INPUT), events[1].prop);
+    ASSERT_EQ(3u, events[0].value.int32Values.size());
+    ASSERT_EQ(3u, events[1].value.int32Values.size());
+    EXPECT_EQ(toInt(VehicleHwKeyInputAction::ACTION_DOWN), events[0].value.int32Values[0]);
+    EXPECT_EQ(1, events[0].value.int32Values[1]);
+    EXPECT_EQ(2, events[0].value.int32Values[2]);
+    EXPECT_EQ(toInt(VehicleHwKeyInputAction::ACTION_UP), events[1].value.int32Values[0]);
+    EXPECT_EQ(1, events[1].value.int32Values[1]);
+    EXPECT_EQ(2, events[1].value.int32Values[2]);
+}
+
 TEST_F(FakeVehicleHardwareTest, testGetEchoReverseBytes) {
     ASSERT_EQ(setValue(VehiclePropValue{
                       .prop = ECHO_REVERSE_BYTES,
diff --git a/automotive/vehicle/aidl/impl/fake_impl/hardware/test/prop.json b/automotive/vehicle/aidl/impl/fake_impl/hardware/test/prop.json
new file mode 100644
index 0000000..7123a00
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/fake_impl/hardware/test/prop.json
@@ -0,0 +1,26 @@
+[
+    {
+        "timestamp": 1000000,
+        "areaId": 0,
+        "value": 8,
+        "prop": 289408000
+    },
+    {
+        "timestamp": 2000000,
+        "areaId": 0,
+        "value": 4,
+        "prop": 289408000
+    },
+    {
+        "timestamp": 3000000,
+        "areaId": 0,
+        "value": 16,
+        "prop": 289408000
+    },
+    {
+        "timestamp": 4000000,
+        "areaId": 0,
+        "value": 10,
+        "prop": 289408000
+    }
+]
diff --git a/automotive/vehicle/aidl/impl/utils/README.md b/automotive/vehicle/aidl/impl/utils/README.md
new file mode 100644
index 0000000..87bb7e3
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/utils/README.md
@@ -0,0 +1,62 @@
+# Utility classes for VHAL implementation
+---
+
+This directory stores utility classes for VHAL implementation. Vendor
+implementation could use utility classes from `common` folder in their
+VHAL implementation.
+
+## common
+
+Defines common utility libraries.
+
+### ConcurrentQueue
+
+Provides a thread-safe concurrent queue object. Useful for adding object to
+a queue in one thread (usually binder thread) and handle the objects in a
+separate handler thread.
+
+### ParcelableUtils
+
+Provides functions to convert between a regular parcelable and a
+`LargeParcelabe`.
+
+A `LargeParcelable` is a parcelable that marshals the payload
+into a shared memory file if the payload is too large to pass across binder.
+It is used to pass large data across binder. Before sending the data, VHAL
+impl should convert a regular parcelabe to a `LargeParcelable`. After receving
+data, VHAL impl should convert a `LargeParcelable` back to regular parcelabe.
+
+### PendingRequestPool
+
+Defines A class for managing pending requests and automatically call timeout
+callback if the request timed-out.
+
+### PropertyUtils
+
+Defines some useful constants.
+
+### RecurrentTimer
+
+Defines a thread-safe recurrent timer that can call a function periodically.
+
+### VehicleHalTypes
+
+Provides a header file that includes many commonly used header files. Useful
+when you are using multiple types defined in VHAL interface.
+
+### VehicleObjectPool
+
+Defines a reusable in-memory pool for `VehiclePropValue`.
+
+### VehiclePropertyStore
+
+Defines an in-memory map for storing vehicle properties. Allows easier insert,
+delete and lookup.
+
+### VehicleUtils
+
+Defines many useful utility functions.
+
+## test
+
+Defines utility libraries for test only.
diff --git a/automotive/vehicle/aidl/impl/utils/common/include/PendingRequestPool.h b/automotive/vehicle/aidl/impl/utils/common/include/PendingRequestPool.h
index 3f8db93..28cf08e 100644
--- a/automotive/vehicle/aidl/impl/utils/common/include/PendingRequestPool.h
+++ b/automotive/vehicle/aidl/impl/utils/common/include/PendingRequestPool.h
@@ -21,7 +21,6 @@
 #include <android-base/result.h>
 #include <android-base/thread_annotations.h>
 
-#include <atomic>
 #include <list>
 #include <mutex>
 #include <thread>
@@ -85,7 +84,7 @@
     std::unordered_map<const void*, std::list<PendingRequest>> mPendingRequestsByClient
             GUARDED_BY(mLock);
     std::thread mThread;
-    std::atomic<bool> mThreadStop = false;
+    bool mThreadStop = false;
     std::condition_variable mCv;
     std::mutex mCvLock;
 
diff --git a/automotive/vehicle/aidl/impl/utils/common/include/VehicleHalTypes.h b/automotive/vehicle/aidl/impl/utils/common/include/VehicleHalTypes.h
index a7fcdcf..6af1223 100644
--- a/automotive/vehicle/aidl/impl/utils/common/include/VehicleHalTypes.h
+++ b/automotive/vehicle/aidl/impl/utils/common/include/VehicleHalTypes.h
@@ -26,6 +26,7 @@
 #include <aidl/android/hardware/automotive/vehicle/GetValueRequest.h>
 #include <aidl/android/hardware/automotive/vehicle/GetValueResult.h>
 #include <aidl/android/hardware/automotive/vehicle/GetValueResults.h>
+#include <aidl/android/hardware/automotive/vehicle/GsrComplianceRequirementType.h>
 #include <aidl/android/hardware/automotive/vehicle/Obd2CommonIgnitionMonitors.h>
 #include <aidl/android/hardware/automotive/vehicle/Obd2FuelSystemStatus.h>
 #include <aidl/android/hardware/automotive/vehicle/Obd2FuelType.h>
diff --git a/automotive/vehicle/aidl/impl/utils/common/include/VehiclePropertyStore.h b/automotive/vehicle/aidl/impl/utils/common/include/VehiclePropertyStore.h
index ddc4f68..3d25cd3 100644
--- a/automotive/vehicle/aidl/impl/utils/common/include/VehiclePropertyStore.h
+++ b/automotive/vehicle/aidl/impl/utils/common/include/VehiclePropertyStore.h
@@ -46,6 +46,33 @@
     using ValueResultType = VhalResult<VehiclePropValuePool::RecyclableType>;
     using ValuesResultType = VhalResult<std::vector<VehiclePropValuePool::RecyclableType>>;
 
+    enum class EventMode : uint8_t {
+        /**
+         * Only invoke OnValueChangeCallback if the new property value (ignoring timestamp) is
+         * different than the existing value.
+         *
+         * This should be used for regular cases.
+         */
+        ON_VALUE_CHANGE,
+        /**
+         * Always invoke OnValueChangeCallback.
+         *
+         * This should be used for the special properties that are used for delivering event, e.g.
+         * HW_KEY_INPUT.
+         */
+        ALWAYS,
+        /**
+         * Never invoke OnValueChangeCallback.
+         *
+         * This should be used for continuous property subscription when the sample rate for the
+         * subscription is smaller than the refresh rate for the property. E.g., the vehicle speed
+         * is refreshed at 20hz, but we are only subscribing at 10hz. In this case, we want to
+         * generate the property change event at 10hz, not 20hz, but we still want to refresh the
+         * timestamp (via writeValue) at 20hz.
+         */
+        NEVER,
+    };
+
     explicit VehiclePropertyStore(std::shared_ptr<VehiclePropValuePool> valuePool)
         : mValuePool(valuePool) {}
 
@@ -72,8 +99,10 @@
     // 'status' would be initialized to {@code VehiclePropertyStatus::AVAILABLE}, if this is to
     // override an existing value, the status for the existing value would be used for the
     // overridden value.
+    // 'EventMode' controls whether the 'OnValueChangeCallback' will be called for this operation.
     VhalResult<void> writeValue(VehiclePropValuePool::RecyclableType propValue,
-                                bool updateStatus = false);
+                                bool updateStatus = false,
+                                EventMode mode = EventMode::ON_VALUE_CHANGE);
 
     // Remove a given property value from the property store. The 'propValue' would be used to
     // generate the key for the value to remove.
diff --git a/automotive/vehicle/aidl/impl/utils/common/src/PendingRequestPool.cpp b/automotive/vehicle/aidl/impl/utils/common/src/PendingRequestPool.cpp
index 0196edd..ab50499 100644
--- a/automotive/vehicle/aidl/impl/utils/common/src/PendingRequestPool.cpp
+++ b/automotive/vehicle/aidl/impl/utils/common/src/PendingRequestPool.cpp
@@ -39,20 +39,27 @@
 
 }  // namespace
 
-PendingRequestPool::PendingRequestPool(int64_t timeoutInNano)
-    : mTimeoutInNano(timeoutInNano), mThread([this] {
-          // [this] must be alive within this thread because destructor would wait for this thread
-          // to exit.
-          int64_t sleepTime = std::min(mTimeoutInNano, static_cast<int64_t>(CHECK_TIME_IN_NANO));
-          std::unique_lock<std::mutex> lk(mCvLock);
-          while (!mCv.wait_for(lk, std::chrono::nanoseconds(sleepTime),
-                               [this] { return mThreadStop.load(); })) {
-              checkTimeout();
-          }
-      }) {}
+PendingRequestPool::PendingRequestPool(int64_t timeoutInNano) : mTimeoutInNano(timeoutInNano) {
+    mThread = std::thread([this] {
+        // [this] must be alive within this thread because destructor would wait for this thread
+        // to exit.
+        int64_t sleepTime = std::min(mTimeoutInNano, static_cast<int64_t>(CHECK_TIME_IN_NANO));
+        std::unique_lock<std::mutex> lk(mCvLock);
+        while (!mCv.wait_for(lk, std::chrono::nanoseconds(sleepTime),
+                             [this] { return mThreadStop; })) {
+            checkTimeout();
+        }
+    });
+}
 
 PendingRequestPool::~PendingRequestPool() {
-    mThreadStop = true;
+    {
+        // Even if the shared variable is atomic, it must be modified under the
+        // mutex in order to correctly publish the modification to the waiting
+        // thread.
+        std::unique_lock<std::mutex> lk(mCvLock);
+        mThreadStop = true;
+    }
     mCv.notify_all();
     if (mThread.joinable()) {
         mThread.join();
diff --git a/automotive/vehicle/aidl/impl/utils/common/src/RecurrentTimer.cpp b/automotive/vehicle/aidl/impl/utils/common/src/RecurrentTimer.cpp
index 8521c4d..fbc79fa 100644
--- a/automotive/vehicle/aidl/impl/utils/common/src/RecurrentTimer.cpp
+++ b/automotive/vehicle/aidl/impl/utils/common/src/RecurrentTimer.cpp
@@ -29,7 +29,9 @@
 
 using ::android::base::ScopedLockAssertion;
 
-RecurrentTimer::RecurrentTimer() : mThread(&RecurrentTimer::loop, this) {}
+RecurrentTimer::RecurrentTimer() {
+    mThread = std::thread(&RecurrentTimer::loop, this);
+}
 
 RecurrentTimer::~RecurrentTimer() {
     {
diff --git a/automotive/vehicle/aidl/impl/utils/common/src/VehiclePropertyStore.cpp b/automotive/vehicle/aidl/impl/utils/common/src/VehiclePropertyStore.cpp
index c8fb994..646dc0e 100644
--- a/automotive/vehicle/aidl/impl/utils/common/src/VehiclePropertyStore.cpp
+++ b/automotive/vehicle/aidl/impl/utils/common/src/VehiclePropertyStore.cpp
@@ -106,7 +106,8 @@
 }
 
 VhalResult<void> VehiclePropertyStore::writeValue(VehiclePropValuePool::RecyclableType propValue,
-                                                  bool updateStatus) {
+                                                  bool updateStatus,
+                                                  VehiclePropertyStore::EventMode eventMode) {
     std::scoped_lock<std::mutex> g(mLock);
 
     int32_t propId = propValue->prop;
@@ -145,7 +146,12 @@
     }
 
     record->values[recId] = std::move(propValue);
-    if (valueUpdated && mOnValueChangeCallback != nullptr) {
+
+    if (eventMode == EventMode::NEVER) {
+        return {};
+    }
+
+    if ((eventMode == EventMode::ALWAYS || valueUpdated) && mOnValueChangeCallback != nullptr) {
         mOnValueChangeCallback(*(record->values[recId]));
     }
     return {};
diff --git a/automotive/vehicle/aidl/impl/utils/common/test/VehiclePropertyStoreTest.cpp b/automotive/vehicle/aidl/impl/utils/common/test/VehiclePropertyStoreTest.cpp
index 4d6f811..fea5034 100644
--- a/automotive/vehicle/aidl/impl/utils/common/test/VehiclePropertyStoreTest.cpp
+++ b/automotive/vehicle/aidl/impl/utils/common/test/VehiclePropertyStoreTest.cpp
@@ -448,6 +448,67 @@
     ASSERT_EQ(updatedValue.prop, INVALID_PROP_ID);
 }
 
+TEST_F(VehiclePropertyStoreTest, testPropertyChangeCallbackNoUpdateForTimestampChange) {
+    VehiclePropValue updatedValue{
+            .prop = INVALID_PROP_ID,
+    };
+    VehiclePropValue fuelCapacity = {
+            .prop = toInt(VehicleProperty::INFO_FUEL_CAPACITY),
+            .value = {.floatValues = {1.0}},
+    };
+    ASSERT_RESULT_OK(mStore->writeValue(mValuePool->obtain(fuelCapacity)));
+
+    mStore->setOnValueChangeCallback(
+            [&updatedValue](const VehiclePropValue& value) { updatedValue = value; });
+
+    // Write the same value with different timestamp should succeed but should not trigger callback.
+    fuelCapacity.timestamp = 1;
+    ASSERT_RESULT_OK(mStore->writeValue(mValuePool->obtain(fuelCapacity)));
+
+    ASSERT_EQ(updatedValue.prop, INVALID_PROP_ID);
+}
+
+TEST_F(VehiclePropertyStoreTest, testPropertyChangeCallbackForceUpdate) {
+    VehiclePropValue updatedValue{
+            .prop = INVALID_PROP_ID,
+    };
+    VehiclePropValue fuelCapacity = {
+            .prop = toInt(VehicleProperty::INFO_FUEL_CAPACITY),
+            .value = {.floatValues = {1.0}},
+    };
+    ASSERT_RESULT_OK(mStore->writeValue(mValuePool->obtain(fuelCapacity)));
+
+    mStore->setOnValueChangeCallback(
+            [&updatedValue](const VehiclePropValue& value) { updatedValue = value; });
+
+    fuelCapacity.timestamp = 1;
+    ASSERT_RESULT_OK(mStore->writeValue(mValuePool->obtain(fuelCapacity), /*updateStatus=*/false,
+                                        VehiclePropertyStore::EventMode::ALWAYS));
+
+    ASSERT_EQ(updatedValue, fuelCapacity);
+}
+
+TEST_F(VehiclePropertyStoreTest, testPropertyChangeCallbackForceNoUpdate) {
+    VehiclePropValue updatedValue{
+            .prop = INVALID_PROP_ID,
+    };
+    VehiclePropValue fuelCapacity = {
+            .prop = toInt(VehicleProperty::INFO_FUEL_CAPACITY),
+            .value = {.floatValues = {1.0}},
+    };
+    ASSERT_RESULT_OK(mStore->writeValue(mValuePool->obtain(fuelCapacity)));
+
+    mStore->setOnValueChangeCallback(
+            [&updatedValue](const VehiclePropValue& value) { updatedValue = value; });
+    fuelCapacity.value.floatValues[0] = 2.0;
+    fuelCapacity.timestamp = 1;
+
+    ASSERT_RESULT_OK(mStore->writeValue(mValuePool->obtain(fuelCapacity), /*updateStatus=*/false,
+                                        VehiclePropertyStore::EventMode::NEVER));
+
+    ASSERT_EQ(updatedValue.prop, INVALID_PROP_ID);
+}
+
 }  // namespace vehicle
 }  // namespace automotive
 }  // namespace hardware
diff --git a/automotive/vehicle/aidl/impl/vhal/Android.bp b/automotive/vehicle/aidl/impl/vhal/Android.bp
index 5abcaf6..8b4f559 100644
--- a/automotive/vehicle/aidl/impl/vhal/Android.bp
+++ b/automotive/vehicle/aidl/impl/vhal/Android.bp
@@ -66,3 +66,36 @@
         "libbinder_ndk",
     ],
 }
+
+cc_fuzz {
+    name: "android.hardware.automotive.vehicle@V1-default-service_fuzzer",
+    vendor: true,
+    defaults: [
+        "FakeVehicleHardwareDefaults",
+        "VehicleHalDefaults",
+        "android-automotive-large-parcelable-defaults",
+    ],
+    header_libs: [
+        "IVehicleHardware",
+        "VehicleHalDefaultConfig",
+    ],
+    static_libs: [
+        "DefaultVehicleHal",
+        "FakeVehicleHardware",
+        "VehicleHalUtils",
+        "libbase",
+        "libbinder_random_parcel",
+        "libcutils",
+    ],
+    shared_libs: [
+        "libbinder_ndk",
+        "libbinder",
+        "libutils",
+    ],
+    srcs: ["src/fuzzer.cpp"],
+    fuzz_config: {
+        cc: [
+            "keithmok@google.com",
+        ],
+    },
+}
diff --git a/automotive/vehicle/aidl/impl/vhal/include/DefaultVehicleHal.h b/automotive/vehicle/aidl/impl/vhal/include/DefaultVehicleHal.h
index 9c29816..0439ac6 100644
--- a/automotive/vehicle/aidl/impl/vhal/include/DefaultVehicleHal.h
+++ b/automotive/vehicle/aidl/impl/vhal/include/DefaultVehicleHal.h
@@ -123,10 +123,10 @@
         std::shared_ptr<PendingRequestPool> mPendingRequestPool;
     };
 
-    // A wrapper for binder operations to enable stubbing for test.
-    class IBinder {
+    // A wrapper for binder lifecycle operations to enable stubbing for test.
+    class BinderLifecycleInterface {
       public:
-        virtual ~IBinder() = default;
+        virtual ~BinderLifecycleInterface() = default;
 
         virtual binder_status_t linkToDeath(AIBinder* binder, AIBinder_DeathRecipient* recipient,
                                             void* cookie) = 0;
@@ -134,8 +134,8 @@
         virtual bool isAlive(const AIBinder* binder) = 0;
     };
 
-    // A real implementation for IBinder.
-    class AIBinderImpl final : public IBinder {
+    // A real implementation for BinderLifecycleInterface.
+    class BinderLifecycleHandler final : public BinderLifecycleInterface {
       public:
         binder_status_t linkToDeath(AIBinder* binder, AIBinder_DeathRecipient* recipient,
                                     void* cookie) override;
@@ -154,7 +154,7 @@
     // BinderDiedUnlinkedEvent represents either an onBinderDied or an onBinderUnlinked event.
     struct BinderDiedUnlinkedEvent {
         // true for onBinderDied, false for onBinderUnlinked.
-        bool onBinderDied;
+        bool forOnBinderDied;
         const AIBinder* clientId;
     };
 
@@ -186,8 +186,8 @@
             GUARDED_BY(mLock);
     // SubscriptionClients is thread-safe.
     std::shared_ptr<SubscriptionClients> mSubscriptionClients;
-    // mBinderImpl is only going to be changed in test.
-    std::unique_ptr<IBinder> mBinderImpl;
+    // mBinderLifecycleHandler is only going to be changed in test.
+    std::unique_ptr<BinderLifecycleInterface> mBinderLifecycleHandler;
 
     // Only initialized once.
     std::shared_ptr<std::function<void()>> mRecurrentAction;
@@ -263,7 +263,7 @@
     void setTimeout(int64_t timeoutInNano);
 
     // Test-only
-    void setBinderImpl(std::unique_ptr<IBinder> impl);
+    void setBinderLifecycleHandler(std::unique_ptr<BinderLifecycleInterface> impl);
 };
 
 }  // namespace vehicle
diff --git a/automotive/vehicle/aidl/impl/vhal/include/SubscriptionManager.h b/automotive/vehicle/aidl/impl/vhal/include/SubscriptionManager.h
index 7c8f1b4..14799d9 100644
--- a/automotive/vehicle/aidl/impl/vhal/include/SubscriptionManager.h
+++ b/automotive/vehicle/aidl/impl/vhal/include/SubscriptionManager.h
@@ -41,15 +41,15 @@
   public:
     using ClientIdType = const AIBinder*;
 
-    void addClient(const ClientIdType& clientId, float sampleRate);
+    void addClient(const ClientIdType& clientId, float sampleRateHz);
     void removeClient(const ClientIdType& clientId);
-    float getMaxSampleRate();
+    float getMaxSampleRateHz() const;
 
   private:
-    float mMaxSampleRate = 0.;
-    std::unordered_map<ClientIdType, float> mSampleRates;
+    float mMaxSampleRateHz = 0.;
+    std::unordered_map<ClientIdType, float> mSampleRateHzByClient;
 
-    void refreshMaxSampleRate();
+    void refreshMaxSampleRateHz();
 };
 
 // A thread-safe subscription manager that manages all VHAL subscriptions.
@@ -59,7 +59,7 @@
     using CallbackType =
             std::shared_ptr<aidl::android::hardware::automotive::vehicle::IVehicleCallback>;
 
-    explicit SubscriptionManager(IVehicleHardware* hardware);
+    explicit SubscriptionManager(IVehicleHardware* vehicleHardware);
     ~SubscriptionManager();
 
     // Subscribes to properties according to {@code SubscribeOptions}. Note that all option must
@@ -99,13 +99,8 @@
             const std::vector<aidl::android::hardware::automotive::vehicle::VehiclePropValue>&
                     updatedValues);
 
-    // Gets the sample rate for the continuous property. Returns {@code std::nullopt} if the
-    // property has not been subscribed before or is not a continuous property.
-    std::optional<float> getSampleRate(const ClientIdType& clientId, int32_t propId,
-                                       int32_t areaId);
-
     // Checks whether the sample rate is valid.
-    static bool checkSampleRate(float sampleRate);
+    static bool checkSampleRateHz(float sampleRateHz);
 
   private:
     // Friend class for testing.
@@ -122,17 +117,21 @@
     std::unordered_map<PropIdAreaId, ContSubConfigs, PropIdAreaIdHash> mContSubConfigsByPropIdArea
             GUARDED_BY(mLock);
 
-    VhalResult<void> updateSampleRateLocked(const ClientIdType& clientId,
-                                            const PropIdAreaId& propIdAreaId, float sampleRate)
+    VhalResult<void> addContinuousSubscriberLocked(const ClientIdType& clientId,
+                                                   const PropIdAreaId& propIdAreaId,
+                                                   float sampleRateHz) REQUIRES(mLock);
+    VhalResult<void> removeContinuousSubscriberLocked(const ClientIdType& clientId,
+                                                      const PropIdAreaId& propIdAreaId)
             REQUIRES(mLock);
-    VhalResult<void> removeSampleRateLocked(const ClientIdType& clientId,
-                                            const PropIdAreaId& propIdAreaId) REQUIRES(mLock);
+
+    VhalResult<void> updateContSubConfigs(const PropIdAreaId& PropIdAreaId,
+                                          const ContSubConfigs& newConfig) REQUIRES(mLock);
 
     // Checks whether the manager is empty. For testing purpose.
     bool isEmpty();
 
     // Get the interval in nanoseconds accroding to sample rate.
-    static android::base::Result<int64_t> getInterval(float sampleRate);
+    static android::base::Result<int64_t> getIntervalNanos(float sampleRateHz);
 };
 
 }  // namespace vehicle
diff --git a/automotive/vehicle/aidl/impl/vhal/src/DefaultVehicleHal.cpp b/automotive/vehicle/aidl/impl/vhal/src/DefaultVehicleHal.cpp
index b191aef..d447bf8 100644
--- a/automotive/vehicle/aidl/impl/vhal/src/DefaultVehicleHal.cpp
+++ b/automotive/vehicle/aidl/impl/vhal/src/DefaultVehicleHal.cpp
@@ -78,14 +78,14 @@
     return str;
 }
 
-float getDefaultSampleRate(float sampleRate, float minSampleRate, float maxSampleRate) {
-    if (sampleRate < minSampleRate) {
-        return minSampleRate;
+float getDefaultSampleRateHz(float sampleRateHz, float minSampleRateHz, float maxSampleRateHz) {
+    if (sampleRateHz < minSampleRateHz) {
+        return minSampleRateHz;
     }
-    if (sampleRate > maxSampleRate) {
-        return maxSampleRate;
+    if (sampleRateHz > maxSampleRateHz) {
+        return maxSampleRateHz;
     }
-    return sampleRate;
+    return sampleRateHz;
 }
 
 }  // namespace
@@ -123,8 +123,8 @@
     return mClients.size();
 }
 
-DefaultVehicleHal::DefaultVehicleHal(std::unique_ptr<IVehicleHardware> hardware)
-    : mVehicleHardware(std::move(hardware)),
+DefaultVehicleHal::DefaultVehicleHal(std::unique_ptr<IVehicleHardware> vehicleHardware)
+    : mVehicleHardware(std::move(vehicleHardware)),
       mPendingRequestPool(std::make_shared<PendingRequestPool>(TIMEOUT_IN_NANO)) {
     auto configs = mVehicleHardware->getAllPropertyConfigs();
     for (auto& config : configs) {
@@ -144,11 +144,10 @@
     }
 
     mSubscriptionClients = std::make_shared<SubscriptionClients>(mPendingRequestPool);
-    mSubscriptionClients = std::make_shared<SubscriptionClients>(mPendingRequestPool);
 
     auto subscribeIdByClient = std::make_shared<SubscribeIdByClient>();
-    IVehicleHardware* hardwarePtr = mVehicleHardware.get();
-    mSubscriptionManager = std::make_shared<SubscriptionManager>(hardwarePtr);
+    IVehicleHardware* vehicleHardwarePtr = mVehicleHardware.get();
+    mSubscriptionManager = std::make_shared<SubscriptionManager>(vehicleHardwarePtr);
 
     std::weak_ptr<SubscriptionManager> subscriptionManagerCopy = mSubscriptionManager;
     mVehicleHardware->registerOnPropertyChangeEvent(
@@ -158,13 +157,13 @@
                     }));
 
     // Register heartbeat event.
-    mRecurrentAction =
-            std::make_shared<std::function<void()>>([hardwarePtr, subscriptionManagerCopy]() {
-                checkHealth(hardwarePtr, subscriptionManagerCopy);
+    mRecurrentAction = std::make_shared<std::function<void()>>(
+            [vehicleHardwarePtr, subscriptionManagerCopy]() {
+                checkHealth(vehicleHardwarePtr, subscriptionManagerCopy);
             });
     mRecurrentTimer.registerTimerCallback(HEART_BEAT_INTERVAL_IN_NANO, mRecurrentAction);
 
-    mBinderImpl = std::make_unique<AIBinderImpl>();
+    mBinderLifecycleHandler = std::make_unique<BinderLifecycleHandler>();
     mOnBinderDiedUnlinkedHandlerThread = std::thread([this] { onBinderDiedUnlinkedHandler(); });
     mDeathRecipient = ScopedAIBinder_DeathRecipient(
             AIBinder_DeathRecipient_new(&DefaultVehicleHal::onBinderDied));
@@ -220,7 +219,7 @@
 bool DefaultVehicleHal::monitorBinderLifeCycleLocked(const AIBinder* clientId) {
     OnBinderDiedContext* contextPtr = nullptr;
     if (mOnBinderDiedContexts.find(clientId) != mOnBinderDiedContexts.end()) {
-        return mBinderImpl->isAlive(clientId);
+        return mBinderLifecycleHandler->isAlive(clientId);
     } else {
         std::unique_ptr<OnBinderDiedContext> context = std::make_unique<OnBinderDiedContext>(
                 OnBinderDiedContext{.vhal = this, .clientId = clientId});
@@ -232,7 +231,7 @@
     }
 
     // If this function fails, onBinderUnlinked would be called to remove the added context.
-    binder_status_t status = mBinderImpl->linkToDeath(
+    binder_status_t status = mBinderLifecycleHandler->linkToDeath(
             const_cast<AIBinder*>(clientId), mDeathRecipient.get(), static_cast<void*>(contextPtr));
     if (status == STATUS_OK) {
         return true;
@@ -246,7 +245,8 @@
     OnBinderDiedContext* context = reinterpret_cast<OnBinderDiedContext*>(cookie);
     // To be handled in mOnBinderDiedUnlinkedHandlerThread. We cannot handle the event in the same
     // thread because we might be holding the mLock the handler requires.
-    context->vhal->mBinderEvents.push(BinderDiedUnlinkedEvent{true, context->clientId});
+    context->vhal->mBinderEvents.push(
+            BinderDiedUnlinkedEvent{/*forOnBinderDied=*/true, context->clientId});
 }
 
 void DefaultVehicleHal::onBinderDiedWithContext(const AIBinder* clientId) {
@@ -262,7 +262,8 @@
     OnBinderDiedContext* context = reinterpret_cast<OnBinderDiedContext*>(cookie);
     // To be handled in mOnBinderDiedUnlinkedHandlerThread. We cannot handle the event in the same
     // thread because we might be holding the mLock the handler requires.
-    context->vhal->mBinderEvents.push(BinderDiedUnlinkedEvent{false, context->clientId});
+    context->vhal->mBinderEvents.push(
+            BinderDiedUnlinkedEvent{/*forOnBinderDied=*/false, context->clientId});
 }
 
 void DefaultVehicleHal::onBinderUnlinkedWithContext(const AIBinder* clientId) {
@@ -275,7 +276,7 @@
 void DefaultVehicleHal::onBinderDiedUnlinkedHandler() {
     while (mBinderEvents.waitForItems()) {
         for (BinderDiedUnlinkedEvent& event : mBinderEvents.flush()) {
-            if (event.onBinderDied) {
+            if (event.forOnBinderDied) {
                 onBinderDiedWithContext(event.clientId);
             } else {
                 onBinderUnlinkedWithContext(event.clientId);
@@ -349,6 +350,9 @@
 
 ScopedAStatus DefaultVehicleHal::getValues(const CallbackType& callback,
                                            const GetValueRequests& requests) {
+    if (callback == nullptr) {
+        return ScopedAStatus::fromExceptionCode(EX_NULL_POINTER);
+    }
     expected<LargeParcelableBase::BorrowedOwnedObject<GetValueRequests>, ScopedAStatus>
             deserializedResults = fromStableLargeParcelable(requests);
     if (!deserializedResults.ok()) {
@@ -432,6 +436,9 @@
 
 ScopedAStatus DefaultVehicleHal::setValues(const CallbackType& callback,
                                            const SetValueRequests& requests) {
+    if (callback == nullptr) {
+        return ScopedAStatus::fromExceptionCode(EX_NULL_POINTER);
+    }
     expected<LargeParcelableBase::BorrowedOwnedObject<SetValueRequests>, ScopedAStatus>
             deserializedResults = fromStableLargeParcelable(requests);
     if (!deserializedResults.ok()) {
@@ -589,18 +596,20 @@
         }
 
         if (config.changeMode == VehiclePropertyChangeMode::CONTINUOUS) {
-            float sampleRate = option.sampleRate;
-            float minSampleRate = config.minSampleRate;
-            float maxSampleRate = config.maxSampleRate;
-            if (sampleRate < minSampleRate || sampleRate > maxSampleRate) {
-                float defaultRate = getDefaultSampleRate(sampleRate, minSampleRate, maxSampleRate);
-                ALOGW("sample rate: %f out of range, must be within %f and %f, set to %f",
-                      sampleRate, minSampleRate, maxSampleRate, defaultRate);
-                sampleRate = defaultRate;
+            float sampleRateHz = option.sampleRate;
+            float minSampleRateHz = config.minSampleRate;
+            float maxSampleRateHz = config.maxSampleRate;
+            float defaultRateHz =
+                    getDefaultSampleRateHz(sampleRateHz, minSampleRateHz, maxSampleRateHz);
+            if (sampleRateHz != defaultRateHz) {
+                ALOGW("sample rate: %f HZ out of range, must be within %f HZ and %f HZ , set to %f "
+                      "HZ",
+                      sampleRateHz, minSampleRateHz, maxSampleRateHz, defaultRateHz);
+                sampleRateHz = defaultRateHz;
             }
-            if (!SubscriptionManager::checkSampleRate(sampleRate)) {
+            if (!SubscriptionManager::checkSampleRateHz(sampleRateHz)) {
                 return StatusError(StatusCode::INVALID_ARG)
-                       << "invalid sample rate: " << sampleRate;
+                       << "invalid sample rate: " << sampleRateHz << " HZ";
             }
         }
 
@@ -625,11 +634,13 @@
                                            const std::vector<SubscribeOptions>& options,
                                            [[maybe_unused]] int32_t maxSharedMemoryFileCount) {
     // TODO(b/205189110): Use shared memory file count.
+    if (callback == nullptr) {
+        return ScopedAStatus::fromExceptionCode(EX_NULL_POINTER);
+    }
     if (auto result = checkSubscribeOptions(options); !result.ok()) {
         ALOGE("subscribe: invalid subscribe options: %s", getErrorMsg(result).c_str());
         return toScopedAStatus(result);
     }
-
     std::vector<SubscribeOptions> onChangeSubscriptions;
     std::vector<SubscribeOptions> continuousSubscriptions;
     for (const auto& option : options) {
@@ -650,7 +661,7 @@
         }
 
         if (config.changeMode == VehiclePropertyChangeMode::CONTINUOUS) {
-            optionCopy.sampleRate = getDefaultSampleRate(
+            optionCopy.sampleRate = getDefaultSampleRateHz(
                     optionCopy.sampleRate, config.minSampleRate, config.maxSampleRate);
             continuousSubscriptions.push_back(std::move(optionCopy));
         } else {
@@ -685,6 +696,9 @@
 
 ScopedAStatus DefaultVehicleHal::unsubscribe(const CallbackType& callback,
                                              const std::vector<int32_t>& propIds) {
+    if (callback == nullptr) {
+        return ScopedAStatus::fromExceptionCode(EX_NULL_POINTER);
+    }
     return toScopedAStatus(mSubscriptionManager->unsubscribe(callback->asBinder().get(), propIds));
 }
 
@@ -729,9 +743,9 @@
     return {};
 }
 
-void DefaultVehicleHal::checkHealth(IVehicleHardware* hardware,
+void DefaultVehicleHal::checkHealth(IVehicleHardware* vehicleHardware,
                                     std::weak_ptr<SubscriptionManager> subscriptionManager) {
-    StatusCode status = hardware->checkHealth();
+    StatusCode status = vehicleHardware->checkHealth();
     if (status != StatusCode::OK) {
         ALOGE("VHAL check health returns non-okay status");
         return;
@@ -746,18 +760,18 @@
     return;
 }
 
-binder_status_t DefaultVehicleHal::AIBinderImpl::linkToDeath(AIBinder* binder,
-                                                             AIBinder_DeathRecipient* recipient,
-                                                             void* cookie) {
+binder_status_t DefaultVehicleHal::BinderLifecycleHandler::linkToDeath(
+        AIBinder* binder, AIBinder_DeathRecipient* recipient, void* cookie) {
     return AIBinder_linkToDeath(binder, recipient, cookie);
 }
 
-bool DefaultVehicleHal::AIBinderImpl::isAlive(const AIBinder* binder) {
+bool DefaultVehicleHal::BinderLifecycleHandler::isAlive(const AIBinder* binder) {
     return AIBinder_isAlive(binder);
 }
 
-void DefaultVehicleHal::setBinderImpl(std::unique_ptr<IBinder> impl) {
-    mBinderImpl = std::move(impl);
+void DefaultVehicleHal::setBinderLifecycleHandler(
+        std::unique_ptr<BinderLifecycleInterface> handler) {
+    mBinderLifecycleHandler = std::move(handler);
 }
 
 bool DefaultVehicleHal::checkDumpPermission() {
diff --git a/automotive/vehicle/aidl/impl/vhal/src/SubscriptionManager.cpp b/automotive/vehicle/aidl/impl/vhal/src/SubscriptionManager.cpp
index 2694401..bba730f 100644
--- a/automotive/vehicle/aidl/impl/vhal/src/SubscriptionManager.cpp
+++ b/automotive/vehicle/aidl/impl/vhal/src/SubscriptionManager.cpp
@@ -42,7 +42,8 @@
 using ::android::base::StringPrintf;
 using ::ndk::ScopedAStatus;
 
-SubscriptionManager::SubscriptionManager(IVehicleHardware* hardware) : mVehicleHardware(hardware) {}
+SubscriptionManager::SubscriptionManager(IVehicleHardware* vehicleHardware)
+    : mVehicleHardware(vehicleHardware) {}
 
 SubscriptionManager::~SubscriptionManager() {
     std::scoped_lock<std::mutex> lockGuard(mLock);
@@ -51,94 +52,82 @@
     mSubscribedPropsByClient.clear();
 }
 
-bool SubscriptionManager::checkSampleRate(float sampleRate) {
-    return getInterval(sampleRate).ok();
+bool SubscriptionManager::checkSampleRateHz(float sampleRateHz) {
+    return getIntervalNanos(sampleRateHz).ok();
 }
 
-Result<int64_t> SubscriptionManager::getInterval(float sampleRate) {
-    int64_t interval = 0;
-    if (sampleRate <= 0) {
+Result<int64_t> SubscriptionManager::getIntervalNanos(float sampleRateHz) {
+    int64_t intervalNanos = 0;
+    if (sampleRateHz <= 0) {
         return Error() << "invalid sample rate, must be a positive number";
     }
-    if (sampleRate <= (ONE_SECOND_IN_NANO / static_cast<float>(INT64_MAX))) {
-        return Error() << "invalid sample rate: " << sampleRate << ", too small";
+    if (sampleRateHz <= (ONE_SECOND_IN_NANO / static_cast<float>(INT64_MAX))) {
+        return Error() << "invalid sample rate: " << sampleRateHz << ", too small";
     }
-    interval = static_cast<int64_t>(ONE_SECOND_IN_NANO / sampleRate);
-    return interval;
+    intervalNanos = static_cast<int64_t>(ONE_SECOND_IN_NANO / sampleRateHz);
+    return intervalNanos;
 }
 
-void ContSubConfigs::refreshMaxSampleRate() {
-    float maxSampleRate = 0.;
+void ContSubConfigs::refreshMaxSampleRateHz() {
+    float maxSampleRateHz = 0.;
     // This is not called frequently so a brute-focre is okay. More efficient way exists but this
     // is simpler.
-    for (const auto& [_, sampleRate] : mSampleRates) {
-        if (sampleRate > maxSampleRate) {
-            maxSampleRate = sampleRate;
+    for (const auto& [_, sampleRateHz] : mSampleRateHzByClient) {
+        if (sampleRateHz > maxSampleRateHz) {
+            maxSampleRateHz = sampleRateHz;
         }
     }
-    mMaxSampleRate = maxSampleRate;
+    mMaxSampleRateHz = maxSampleRateHz;
 }
 
-void ContSubConfigs::addClient(const ClientIdType& clientId, float sampleRate) {
-    mSampleRates[clientId] = sampleRate;
-    refreshMaxSampleRate();
+void ContSubConfigs::addClient(const ClientIdType& clientId, float sampleRateHz) {
+    mSampleRateHzByClient[clientId] = sampleRateHz;
+    refreshMaxSampleRateHz();
 }
 
 void ContSubConfigs::removeClient(const ClientIdType& clientId) {
-    mSampleRates.erase(clientId);
-    refreshMaxSampleRate();
+    mSampleRateHzByClient.erase(clientId);
+    refreshMaxSampleRateHz();
 }
 
-float ContSubConfigs::getMaxSampleRate() {
-    return mMaxSampleRate;
+float ContSubConfigs::getMaxSampleRateHz() const {
+    return mMaxSampleRateHz;
 }
 
-VhalResult<void> SubscriptionManager::updateSampleRateLocked(const ClientIdType& clientId,
-                                                             const PropIdAreaId& propIdAreaId,
-                                                             float sampleRate) {
+VhalResult<void> SubscriptionManager::addContinuousSubscriberLocked(
+        const ClientIdType& clientId, const PropIdAreaId& propIdAreaId, float sampleRateHz) {
     // Make a copy so that we don't modify 'mContSubConfigsByPropIdArea' on failure cases.
-    ContSubConfigs infoCopy = mContSubConfigsByPropIdArea[propIdAreaId];
-    infoCopy.addClient(clientId, sampleRate);
-    if (infoCopy.getMaxSampleRate() ==
-        mContSubConfigsByPropIdArea[propIdAreaId].getMaxSampleRate()) {
-        mContSubConfigsByPropIdArea[propIdAreaId] = infoCopy;
+    ContSubConfigs newConfig = mContSubConfigsByPropIdArea[propIdAreaId];
+    newConfig.addClient(clientId, sampleRateHz);
+    return updateContSubConfigs(propIdAreaId, newConfig);
+}
+
+VhalResult<void> SubscriptionManager::removeContinuousSubscriberLocked(
+        const ClientIdType& clientId, const PropIdAreaId& propIdAreaId) {
+    // Make a copy so that we don't modify 'mContSubConfigsByPropIdArea' on failure cases.
+    ContSubConfigs newConfig = mContSubConfigsByPropIdArea[propIdAreaId];
+    newConfig.removeClient(clientId);
+    return updateContSubConfigs(propIdAreaId, newConfig);
+}
+
+VhalResult<void> SubscriptionManager::updateContSubConfigs(const PropIdAreaId& propIdAreaId,
+                                                           const ContSubConfigs& newConfig) {
+    if (newConfig.getMaxSampleRateHz() ==
+        mContSubConfigsByPropIdArea[propIdAreaId].getMaxSampleRateHz()) {
+        mContSubConfigsByPropIdArea[propIdAreaId] = newConfig;
         return {};
     }
-    float newRate = infoCopy.getMaxSampleRate();
+    float newRateHz = newConfig.getMaxSampleRateHz();
     int32_t propId = propIdAreaId.propId;
     int32_t areaId = propIdAreaId.areaId;
-    if (auto status = mVehicleHardware->updateSampleRate(propId, areaId, newRate);
+    if (auto status = mVehicleHardware->updateSampleRate(propId, areaId, newRateHz);
         status != StatusCode::OK) {
         return StatusError(status) << StringPrintf("failed to update sample rate for prop: %" PRId32
                                                    ", area"
-                                                   ": %" PRId32 ", sample rate: %f",
-                                                   propId, areaId, newRate);
+                                                   ": %" PRId32 ", sample rate: %f HZ",
+                                                   propId, areaId, newRateHz);
     }
-    mContSubConfigsByPropIdArea[propIdAreaId] = infoCopy;
-    return {};
-}
-
-VhalResult<void> SubscriptionManager::removeSampleRateLocked(const ClientIdType& clientId,
-                                                             const PropIdAreaId& propIdAreaId) {
-    // Make a copy so that we don't modify 'mContSubConfigsByPropIdArea' on failure cases.
-    ContSubConfigs infoCopy = mContSubConfigsByPropIdArea[propIdAreaId];
-    infoCopy.removeClient(clientId);
-    if (infoCopy.getMaxSampleRate() ==
-        mContSubConfigsByPropIdArea[propIdAreaId].getMaxSampleRate()) {
-        mContSubConfigsByPropIdArea[propIdAreaId] = infoCopy;
-        return {};
-    }
-    float newRate = infoCopy.getMaxSampleRate();
-    int32_t propId = propIdAreaId.propId;
-    int32_t areaId = propIdAreaId.areaId;
-    if (auto status = mVehicleHardware->updateSampleRate(propId, areaId, newRate);
-        status != StatusCode::OK) {
-        return StatusError(status) << StringPrintf("failed to update sample rate for prop: %" PRId32
-                                                   ", area"
-                                                   ": %" PRId32 ", sample rate: %f",
-                                                   propId, areaId, newRate);
-    }
-    mContSubConfigsByPropIdArea[propIdAreaId] = infoCopy;
+    mContSubConfigsByPropIdArea[propIdAreaId] = newConfig;
     return {};
 }
 
@@ -147,14 +136,12 @@
                                                 bool isContinuousProperty) {
     std::scoped_lock<std::mutex> lockGuard(mLock);
 
-    std::vector<int64_t> intervals;
     for (const auto& option : options) {
-        float sampleRate = option.sampleRate;
+        float sampleRateHz = option.sampleRate;
 
         if (isContinuousProperty) {
-            auto intervalResult = getInterval(sampleRate);
-            if (!intervalResult.ok()) {
-                return StatusError(StatusCode::INVALID_ARG) << intervalResult.error().message();
+            if (auto result = getIntervalNanos(sampleRateHz); !result.ok()) {
+                return StatusError(StatusCode::INVALID_ARG) << result.error().message();
             }
         }
 
@@ -176,7 +163,8 @@
                     .areaId = areaId,
             };
             if (isContinuousProperty) {
-                if (auto result = updateSampleRateLocked(clientId, propIdAreaId, option.sampleRate);
+                if (auto result = addContinuousSubscriberLocked(clientId, propIdAreaId,
+                                                                option.sampleRate);
                     !result.ok()) {
                     return result;
                 }
@@ -214,7 +202,7 @@
     while (it != propIdAreaIds.end()) {
         int32_t propId = it->propId;
         if (std::find(propIds.begin(), propIds.end(), propId) != propIds.end()) {
-            if (auto result = removeSampleRateLocked(clientId, *it); !result.ok()) {
+            if (auto result = removeContinuousSubscriberLocked(clientId, *it); !result.ok()) {
                 return result;
             }
 
@@ -244,7 +232,7 @@
 
     auto& subscriptions = mSubscribedPropsByClient[clientId];
     for (auto const& propIdAreaId : subscriptions) {
-        if (auto result = removeSampleRateLocked(clientId, propIdAreaId); !result.ok()) {
+        if (auto result = removeContinuousSubscriberLocked(clientId, propIdAreaId); !result.ok()) {
             return result;
         }
 
diff --git a/automotive/vehicle/aidl/impl/vhal/src/fuzzer.cpp b/automotive/vehicle/aidl/impl/vhal/src/fuzzer.cpp
new file mode 100644
index 0000000..ac1e3b1
--- /dev/null
+++ b/automotive/vehicle/aidl/impl/vhal/src/fuzzer.cpp
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <DefaultVehicleHal.h>
+#include <FakeVehicleHardware.h>
+#include <fuzzbinder/libbinder_ndk_driver.h>
+#include <fuzzer/FuzzedDataProvider.h>
+
+using ::android::fuzzService;
+using ::android::hardware::automotive::vehicle::DefaultVehicleHal;
+using ::android::hardware::automotive::vehicle::fake::FakeVehicleHardware;
+using ::ndk::SharedRefBase;
+
+extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
+    std::unique_ptr<FakeVehicleHardware> hardware = std::make_unique<FakeVehicleHardware>();
+    std::shared_ptr<DefaultVehicleHal> vhal =
+            ::ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
+
+    fuzzService(vhal->asBinder().get(), FuzzedDataProvider(data, size));
+
+    return 0;
+}
diff --git a/automotive/vehicle/aidl/impl/vhal/test/DefaultVehicleHalTest.cpp b/automotive/vehicle/aidl/impl/vhal/test/DefaultVehicleHalTest.cpp
index f48b906..36fa5e6 100644
--- a/automotive/vehicle/aidl/impl/vhal/test/DefaultVehicleHalTest.cpp
+++ b/automotive/vehicle/aidl/impl/vhal/test/DefaultVehicleHalTest.cpp
@@ -324,9 +324,9 @@
         mCallbackClient = IVehicleCallback::fromBinder(mBinder);
 
         // Set the linkToDeath to a fake implementation that always returns OK.
-        auto binderImpl = std::make_unique<TestBinderImpl>();
-        mBinderImpl = binderImpl.get();
-        mVhal->setBinderImpl(std::move(binderImpl));
+        auto handler = std::make_unique<TestBinderLifecycleHandler>();
+        mBinderLifecycleHandler = handler.get();
+        mVhal->setBinderLifecycleHandler(std::move(handler));
     }
 
     void TearDown() override {
@@ -370,7 +370,7 @@
 
     bool hasNoSubscriptions() { return mVhal->mSubscriptionManager->isEmpty(); }
 
-    void setBinderAlive(bool isAlive) { mBinderImpl->setAlive(isAlive); };
+    void setBinderAlive(bool isAlive) { mBinderLifecycleHandler->setAlive(isAlive); };
 
     static Result<void> getValuesTestCases(size_t size, GetValueRequests& requests,
                                            std::vector<GetValueResult>& expectedResults,
@@ -444,7 +444,7 @@
     }
 
   private:
-    class TestBinderImpl final : public DefaultVehicleHal::IBinder {
+    class TestBinderLifecycleHandler final : public DefaultVehicleHal::BinderLifecycleInterface {
       public:
         binder_status_t linkToDeath(AIBinder*, AIBinder_DeathRecipient*, void*) override {
             if (mIsAlive) {
@@ -468,7 +468,7 @@
     std::shared_ptr<MockVehicleCallback> mCallback;
     std::shared_ptr<IVehicleCallback> mCallbackClient;
     SpAIBinder mBinder;
-    TestBinderImpl* mBinderImpl;
+    TestBinderLifecycleHandler* mBinderLifecycleHandler;
 };
 
 TEST_F(DefaultVehicleHalTest, testGetAllPropConfigsSmall) {
diff --git a/automotive/vehicle/aidl/impl/vhal/test/SubscriptionManagerTest.cpp b/automotive/vehicle/aidl/impl/vhal/test/SubscriptionManagerTest.cpp
index 3f59363..eb3c663 100644
--- a/automotive/vehicle/aidl/impl/vhal/test/SubscriptionManagerTest.cpp
+++ b/automotive/vehicle/aidl/impl/vhal/test/SubscriptionManagerTest.cpp
@@ -477,16 +477,16 @@
     ASSERT_THAT(clients[getCallbackClient()], ElementsAre(&updatedValues[1]));
 }
 
-TEST_F(SubscriptionManagerTest, testCheckSampleRateValid) {
-    ASSERT_TRUE(SubscriptionManager::checkSampleRate(1.0));
+TEST_F(SubscriptionManagerTest, testCheckSampleRateHzValid) {
+    ASSERT_TRUE(SubscriptionManager::checkSampleRateHz(1.0));
 }
 
-TEST_F(SubscriptionManagerTest, testCheckSampleRateInvalidTooSmall) {
-    ASSERT_FALSE(SubscriptionManager::checkSampleRate(FLT_MIN));
+TEST_F(SubscriptionManagerTest, testCheckSampleRateHzInvalidTooSmall) {
+    ASSERT_FALSE(SubscriptionManager::checkSampleRateHz(FLT_MIN));
 }
 
-TEST_F(SubscriptionManagerTest, testCheckSampleRateInvalidZero) {
-    ASSERT_FALSE(SubscriptionManager::checkSampleRate(0));
+TEST_F(SubscriptionManagerTest, testCheckSampleRateHzInvalidZero) {
+    ASSERT_FALSE(SubscriptionManager::checkSampleRateHz(0));
 }
 
 }  // namespace vehicle
diff --git a/automotive/vehicle/tools/generate_annotation_enums.py b/automotive/vehicle/tools/generate_annotation_enums.py
new file mode 100644
index 0000000..fc6f157
--- /dev/null
+++ b/automotive/vehicle/tools/generate_annotation_enums.py
@@ -0,0 +1,243 @@
+#!/usr/bin/python
+
+# Copyright (C) 2022 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+"""A script to generate Java files and CPP header files based on annotations in VehicleProperty.aidl
+
+   Need ANDROID_BUILD_TOP environmental variable to be set. This script will update
+   ChangeModeForVehicleProperty.h and AccessForVehicleProperty.h under generated_lib/cpp and
+   ChangeModeForVehicleProperty.java and AccessForVehicleProperty.java under generated_lib/java.
+
+   Usage:
+   $ python generate_annotation_enums.py
+"""
+import os
+import re
+import sys
+
+PROP_AIDL_FILE_PATH = ("hardware/interfaces/automotive/vehicle/aidl/android/hardware/automotive/" +
+    "vehicle/VehicleProperty.aidl")
+CHANGE_MODE_CPP_FILE_PATH = ("hardware/interfaces/automotive/vehicle/aidl/generated_lib/cpp/" +
+    "ChangeModeForVehicleProperty.h")
+ACCESS_CPP_FILE_PATH = ("hardware/interfaces/automotive/vehicle/aidl/generated_lib/cpp/" +
+    "AccessForVehicleProperty.h")
+CHANGE_MODE_JAVA_FILE_PATH = ("hardware/interfaces/automotive/vehicle/aidl/generated_lib/java/" +
+    "ChangeModeForVehicleProperty.java")
+ACCESS_JAVA_FILE_PATH = ("hardware/interfaces/automotive/vehicle/aidl/generated_lib/java/" +
+    "AccessForVehicleProperty.java")
+
+TAB = "    "
+RE_ENUM_START = re.compile("\s*enum VehicleProperty \{")
+RE_ENUM_END = re.compile("\s*\}\;")
+RE_COMMENT_BEGIN = re.compile("\s*\/\*\*?")
+RE_COMMENT_END = re.compile("\s*\*\/")
+RE_CHANGE_MODE = re.compile("\s*\* @change_mode (\S+)\s*")
+RE_ACCESS = re.compile("\s*\* @access (\S+)\s*")
+RE_VALUE = re.compile("\s*(\w+)\s*=(.*)")
+
+LICENSE = """/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * DO NOT EDIT MANUALLY!!!
+ *
+ * Generated by tools/generate_annotation_enums.py.
+ */
+
+"""
+
+CHANGE_MODE_CPP_HEADER = """#ifndef android_hardware_automotive_vehicle_aidl_generated_lib_ChangeModeForVehicleProperty_H_
+#define android_hardware_automotive_vehicle_aidl_generated_lib_ChangeModeForVehicleProperty_H_
+
+#include <aidl/android/hardware/automotive/vehicle/VehicleProperty.h>
+#include <aidl/android/hardware/automotive/vehicle/VehiclePropertyChangeMode.h>
+
+#include <unordered_map>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace automotive {
+namespace vehicle {
+
+std::unordered_map<VehicleProperty, VehiclePropertyChangeMode> ChangeModeForVehicleProperty = {
+"""
+
+CHANGE_MODE_CPP_FOOTER = """
+};
+
+}  // namespace vehicle
+}  // namespace automotive
+}  // namespace hardware
+}  // namespace android
+}  // aidl
+
+#endif  // android_hardware_automotive_vehicle_aidl_generated_lib_ChangeModeForVehicleProperty_H_
+"""
+
+ACCESS_CPP_HEADER = """#ifndef android_hardware_automotive_vehicle_aidl_generated_lib_AccessForVehicleProperty_H_
+#define android_hardware_automotive_vehicle_aidl_generated_lib_AccessForVehicleProperty_H_
+
+#include <aidl/android/hardware/automotive/vehicle/VehicleProperty.h>
+#include <aidl/android/hardware/automotive/vehicle/VehiclePropertyAccess.h>
+
+#include <unordered_map>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace automotive {
+namespace vehicle {
+
+std::unordered_map<VehicleProperty, VehiclePropertyAccess> AccessForVehicleProperty = {
+"""
+
+ACCESS_CPP_FOOTER = """
+};
+
+}  // namespace vehicle
+}  // namespace automotive
+}  // namespace hardware
+}  // namespace android
+}  // aidl
+
+#endif  // android_hardware_automotive_vehicle_aidl_generated_lib_AccessForVehicleProperty_H_
+"""
+
+CHANGE_MODE_JAVA_HEADER = """package android.hardware.automotive.vehicle;
+
+import java.util.Map;
+
+public final class ChangeModeForVehicleProperty {
+
+    public static final Map<Integer, Integer> values = Map.ofEntries(
+"""
+
+CHANGE_MODE_JAVA_FOOTER = """
+    );
+
+}
+"""
+
+ACCESS_JAVA_HEADER = """package android.hardware.automotive.vehicle;
+
+import java.util.Map;
+
+public final class AccessForVehicleProperty {
+
+    public static final Map<Integer, Integer> values = Map.ofEntries(
+"""
+
+ACCESS_JAVA_FOOTER = """
+    );
+
+}
+"""
+
+
+class Converter:
+
+    def __init__(self, name, annotation_re):
+        self.name = name
+        self.annotation_re = annotation_re
+
+    def convert(self, input, output, header, footer, cpp):
+        processing = False
+        in_comment = False
+        content = LICENSE + header
+        annotation = None
+        id = 0
+        with open(input, 'r') as f:
+            for line in f.readlines():
+                if RE_ENUM_START.match(line):
+                    processing = True
+                    annotation = None
+                elif RE_ENUM_END.match(line):
+                    processing = False
+                if not processing:
+                    continue
+                if RE_COMMENT_BEGIN.match(line):
+                    in_comment = True
+                if RE_COMMENT_END.match(line):
+                    in_comment = False
+                if in_comment:
+                    match = self.annotation_re.match(line)
+                    if match:
+                        annotation = match.group(1)
+                else:
+                    match = RE_VALUE.match(line)
+                    if match:
+                        prop_name = match.group(1)
+                        if prop_name == "INVALID":
+                            continue
+                        if not annotation:
+                            print("No @" + self.name + " annotation for property: " + prop_name)
+                            sys.exit(1)
+                        if id != 0:
+                            content += "\n"
+                        if cpp:
+                            annotation = annotation.replace(".", "::")
+                            content += (TAB + TAB + "{VehicleProperty::" + prop_name + ", " +
+                                        annotation + "},")
+                        else:
+                            content += (TAB + TAB + "Map.entry(VehicleProperty." + prop_name + ", " +
+                                        annotation + "),")
+                        id += 1
+
+        # Remove the additional "," at the end for the Java file.
+        if not cpp:
+            content = content[:-1]
+
+        content += footer
+
+        with open(output, 'w') as f:
+            f.write(content)
+
+
+def main():
+    android_top = os.environ['ANDROID_BUILD_TOP']
+    if not android_top:
+        print("ANDROID_BUILD_TOP is not in envorinmental variable, please run source and lunch " +
+            "at the android root")
+
+    aidl_file = os.path.join(android_top, PROP_AIDL_FILE_PATH)
+    change_mode_cpp_output = os.path.join(android_top, CHANGE_MODE_CPP_FILE_PATH);
+    access_cpp_output = os.path.join(android_top, ACCESS_CPP_FILE_PATH);
+    change_mode_java_output = os.path.join(android_top, CHANGE_MODE_JAVA_FILE_PATH);
+    access_java_output = os.path.join(android_top, ACCESS_JAVA_FILE_PATH);
+
+    c = Converter("change_mode", RE_CHANGE_MODE);
+    c.convert(aidl_file, change_mode_cpp_output, CHANGE_MODE_CPP_HEADER, CHANGE_MODE_CPP_FOOTER, True)
+    c.convert(aidl_file, change_mode_java_output, CHANGE_MODE_JAVA_HEADER, CHANGE_MODE_JAVA_FOOTER, False)
+    c = Converter("access", RE_ACCESS)
+    c.convert(aidl_file, access_cpp_output, ACCESS_CPP_HEADER, ACCESS_CPP_FOOTER, True)
+    c.convert(aidl_file, access_java_output, ACCESS_JAVA_HEADER, ACCESS_JAVA_FOOTER, False)
+
+
+if __name__ == "__main__":
+    main()
\ No newline at end of file
diff --git a/automotive/vehicle/vts/Android.bp b/automotive/vehicle/vts/Android.bp
index b78e0ff..1cfd542 100644
--- a/automotive/vehicle/vts/Android.bp
+++ b/automotive/vehicle/vts/Android.bp
@@ -44,6 +44,7 @@
     test_suites: [
         "general-tests",
         "vts",
+        "automotive-tests",
     ],
     require_root: true,
 }
diff --git a/automotive/vehicle/vts/src/VtsHalAutomotiveVehicle_TargetTest.cpp b/automotive/vehicle/vts/src/VtsHalAutomotiveVehicle_TargetTest.cpp
index c431d85..5de206b 100644
--- a/automotive/vehicle/vts/src/VtsHalAutomotiveVehicle_TargetTest.cpp
+++ b/automotive/vehicle/vts/src/VtsHalAutomotiveVehicle_TargetTest.cpp
@@ -48,6 +48,7 @@
 using ::android::getAidlHalInstanceNames;
 using ::android::base::ScopedLockAssertion;
 using ::android::base::StringPrintf;
+using ::android::frameworks::automotive::vhal::ErrorCode;
 using ::android::frameworks::automotive::vhal::HalPropError;
 using ::android::frameworks::automotive::vhal::IHalPropConfig;
 using ::android::frameworks::automotive::vhal::IHalPropValue;
@@ -287,7 +288,7 @@
     auto setValueResult = mVhalClient->setValueSync(*getValueResult.value());
 
     ASSERT_FALSE(setValueResult.ok()) << "Expect set a read-only value to fail";
-    ASSERT_EQ(setValueResult.error().code(), StatusCode::ACCESS_DENIED);
+    ASSERT_EQ(setValueResult.error().code(), ErrorCode::ACCESS_DENIED_FROM_VHAL);
 }
 
 // Test subscribe() and unsubscribe().
diff --git a/biometrics/common/thread/Android.bp b/biometrics/common/thread/Android.bp
new file mode 100644
index 0000000..a497d01
--- /dev/null
+++ b/biometrics/common/thread/Android.bp
@@ -0,0 +1,26 @@
+cc_library {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    name: "android.hardware.biometrics.common.thread",
+    export_include_dirs: ["include"],
+    vendor: true,
+    srcs: [
+        "WorkerThread.cpp",
+    ],
+}
+
+cc_test_host {
+    name: "android.hardware.biometrics.common.WorkerThreadTest",
+    local_include_dirs: ["include"],
+    srcs: [
+        "tests/WorkerThreadTest.cpp",
+        "WorkerThread.cpp",
+    ],
+    shared_libs: [
+        "libcutils",
+    ],
+    test_suites: ["general-tests"],
+}
diff --git a/biometrics/fingerprint/aidl/default/WorkerThread.cpp b/biometrics/common/thread/WorkerThread.cpp
similarity index 89%
rename from biometrics/fingerprint/aidl/default/WorkerThread.cpp
rename to biometrics/common/thread/WorkerThread.cpp
index d1a63d0..61d1a13 100644
--- a/biometrics/fingerprint/aidl/default/WorkerThread.cpp
+++ b/biometrics/common/thread/WorkerThread.cpp
@@ -14,9 +14,9 @@
  * limitations under the License.
  */
 
-#include "WorkerThread.h"
+#include "thread/WorkerThread.h"
 
-namespace aidl::android::hardware::biometrics::fingerprint {
+namespace aidl::android::hardware::biometrics {
 
 // It's important that mThread is initialized after everything else because it runs a member
 // function that may use any member of this class.
@@ -31,7 +31,10 @@
 WorkerThread::~WorkerThread() {
     // This is a signal for threadFunc to terminate as soon as possible, and a hint for schedule
     // that it doesn't need to do any work.
-    mIsDestructing = true;
+    {
+        std::unique_lock<std::mutex> lock(mQueueMutex);
+        mIsDestructing = true;
+    }
     mQueueCond.notify_all();
     mThread.join();
 }
@@ -65,4 +68,4 @@
     }
 }
 
-}  // namespace aidl::android::hardware::biometrics::fingerprint
+}  // namespace aidl::android::hardware::biometrics
diff --git a/biometrics/fingerprint/aidl/default/include/Callable.h b/biometrics/common/thread/include/thread/Callable.h
similarity index 92%
rename from biometrics/fingerprint/aidl/default/include/Callable.h
rename to biometrics/common/thread/include/thread/Callable.h
index c629511..6eeff76 100644
--- a/biometrics/fingerprint/aidl/default/include/Callable.h
+++ b/biometrics/common/thread/include/thread/Callable.h
@@ -16,7 +16,7 @@
 
 #pragma once
 
-namespace aidl::android::hardware::biometrics::fingerprint {
+namespace aidl::android::hardware::biometrics {
 
 // Interface for representing parameterless functions. Unlike std::function<void()>, this can also
 // represent move-only lambdas.
@@ -51,4 +51,4 @@
     return std::make_unique<AnyFuncWrapper<T>>(std::move(func));
 }
 
-}  // namespace aidl::android::hardware::biometrics::fingerprint
\ No newline at end of file
+}  // namespace aidl::android::hardware::biometrics
\ No newline at end of file
diff --git a/biometrics/fingerprint/aidl/default/include/WorkerThread.h b/biometrics/common/thread/include/thread/WorkerThread.h
similarity index 95%
rename from biometrics/fingerprint/aidl/default/include/WorkerThread.h
rename to biometrics/common/thread/include/thread/WorkerThread.h
index 6fff4f2..5f89a7f 100644
--- a/biometrics/fingerprint/aidl/default/include/WorkerThread.h
+++ b/biometrics/common/thread/include/thread/WorkerThread.h
@@ -23,7 +23,7 @@
 
 #include "Callable.h"
 
-namespace aidl::android::hardware::biometrics::fingerprint {
+namespace aidl::android::hardware::biometrics {
 
 // A class that encapsulates a worker thread and a task queue, and provides a convenient interface
 // for a Session to schedule its tasks for asynchronous execution.
@@ -76,4 +76,4 @@
     std::thread mThread;
 };
 
-}  // namespace aidl::android::hardware::biometrics::fingerprint
+}  // namespace aidl::android::hardware::biometrics
diff --git a/biometrics/fingerprint/aidl/default/tests/WorkerThreadTest.cpp b/biometrics/common/thread/tests/WorkerThreadTest.cpp
similarity index 96%
rename from biometrics/fingerprint/aidl/default/tests/WorkerThreadTest.cpp
rename to biometrics/common/thread/tests/WorkerThreadTest.cpp
index 902fb40..5bb9e7e 100644
--- a/biometrics/fingerprint/aidl/default/tests/WorkerThreadTest.cpp
+++ b/biometrics/common/thread/tests/WorkerThreadTest.cpp
@@ -21,12 +21,11 @@
 
 #include <gtest/gtest.h>
 
-#include "WorkerThread.h"
+#include "thread/WorkerThread.h"
 
 namespace {
 
-using aidl::android::hardware::biometrics::fingerprint::Callable;
-using aidl::android::hardware::biometrics::fingerprint::WorkerThread;
+using namespace aidl::android::hardware::biometrics;
 using namespace std::chrono_literals;
 
 TEST(WorkerThreadTest, ScheduleReturnsTrueWhenQueueHasSpace) {
diff --git a/biometrics/common/util/Android.bp b/biometrics/common/util/Android.bp
new file mode 100644
index 0000000..918ef72
--- /dev/null
+++ b/biometrics/common/util/Android.bp
@@ -0,0 +1,18 @@
+cc_library {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    name: "android.hardware.biometrics.common.util",
+    export_include_dirs: ["include"],
+    vendor: true,
+    srcs: [
+        "CancellationSignal.cpp",
+    ],
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+        "android.hardware.biometrics.common-V2-ndk",
+    ],
+}
diff --git a/biometrics/fingerprint/aidl/default/CancellationSignal.cpp b/biometrics/common/util/CancellationSignal.cpp
similarity index 87%
rename from biometrics/fingerprint/aidl/default/CancellationSignal.cpp
rename to biometrics/common/util/CancellationSignal.cpp
index 6598316..7888838 100644
--- a/biometrics/fingerprint/aidl/default/CancellationSignal.cpp
+++ b/biometrics/common/util/CancellationSignal.cpp
@@ -14,12 +14,12 @@
  * limitations under the License.
  */
 
-#include "CancellationSignal.h"
+#include "util/CancellationSignal.h"
 
 #include <android-base/logging.h>
 #include <chrono>
 
-namespace aidl::android::hardware::biometrics::fingerprint {
+namespace aidl::android::hardware::biometrics {
 
 CancellationSignal::CancellationSignal(std::promise<void>&& cancellationPromise)
     : mCancellationPromise(std::move(cancellationPromise)) {}
@@ -34,4 +34,4 @@
     return f.wait_for(std::chrono::seconds(0)) == std::future_status::ready;
 }
 
-}  // namespace aidl::android::hardware::biometrics::fingerprint
+}  // namespace aidl::android::hardware::biometrics
diff --git a/biometrics/fingerprint/aidl/default/include/CancellationSignal.h b/biometrics/common/util/include/util/CancellationSignal.h
similarity index 83%
rename from biometrics/fingerprint/aidl/default/include/CancellationSignal.h
rename to biometrics/common/util/include/util/CancellationSignal.h
index 99f2fba..be77e29 100644
--- a/biometrics/fingerprint/aidl/default/include/CancellationSignal.h
+++ b/biometrics/common/util/include/util/CancellationSignal.h
@@ -17,13 +17,10 @@
 #pragma once
 
 #include <aidl/android/hardware/biometrics/common/BnCancellationSignal.h>
-#include <aidl/android/hardware/biometrics/fingerprint/ISessionCallback.h>
 #include <functional>
 #include <future>
 
-#include "WorkerThread.h"
-
-namespace aidl::android::hardware::biometrics::fingerprint {
+namespace aidl::android::hardware::biometrics {
 
 class CancellationSignal : public common::BnCancellationSignal {
   public:
@@ -39,4 +36,4 @@
 // to this future should be cancelled.
 bool shouldCancel(const std::future<void>& cancellationFuture);
 
-}  // namespace aidl::android::hardware::biometrics::fingerprint
+}  // namespace aidl::android::hardware::biometrics
diff --git a/biometrics/common/util/include/util/Util.h b/biometrics/common/util/include/util/Util.h
new file mode 100644
index 0000000..29ec0f8
--- /dev/null
+++ b/biometrics/common/util/include/util/Util.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android-base/logging.h>
+
+#include <chrono>
+#include <regex>
+#include <thread>
+#include <vector>
+
+namespace aidl::android::hardware::biometrics {
+
+#define SLEEP_MS(x) \
+    if (x > 0) std::this_thread::sleep_for(std::chrono::milliseconds(x))
+#define BEGIN_OP(x)            \
+    do {                       \
+        LOG(INFO) << __func__; \
+        SLEEP_MS(x);           \
+    } while (0)
+#define IS_TRUE(x) ((x == "1") || (x == "true"))
+
+// This is for non-test situations, such as casual cuttlefish users, that don't
+// set an explicit value.
+// Some operations (i.e. enroll, authenticate) will be executed in tight loops
+// by parts of the UI or fail if there is no latency. For example, the
+// Face settings page constantly runs auth and the enrollment UI uses a
+// cancel/restart cycle that requires some latency while the activities change.
+#define DEFAULT_LATENCY 800
+
+class Util {
+  public:
+    static int64_t getSystemNanoTime() {
+        timespec now;
+        clock_gettime(CLOCK_MONOTONIC, &now);
+        return now.tv_sec * 1000000000LL + now.tv_nsec;
+    }
+
+    static bool hasElapsed(int64_t start, int64_t durationMillis) {
+        auto now = getSystemNanoTime();
+        if (now < start) return true;
+        if (durationMillis <= 0) return true;
+        return ((now - start) / 1000000LL) > durationMillis;
+    }
+
+    static std::vector<std::string> split(const std::string& str, const std::string& sep) {
+        std::regex regex(sep);
+        std::vector<std::string> parts(
+                std::sregex_token_iterator(str.begin(), str.end(), regex, -1),
+                std::sregex_token_iterator());
+        return parts;
+    }
+};
+
+}  // namespace aidl::android::hardware::biometrics
\ No newline at end of file
diff --git a/biometrics/face/aidl/default/Android.bp b/biometrics/face/aidl/default/Android.bp
index 7f66eca..63a3645 100644
--- a/biometrics/face/aidl/default/Android.bp
+++ b/biometrics/face/aidl/default/Android.bp
@@ -18,10 +18,43 @@
         "libbinder_ndk",
         "android.hardware.biometrics.face-V2-ndk",
         "android.hardware.biometrics.common-V2-ndk",
+        "android.hardware.biometrics.common.thread",
+        "android.hardware.biometrics.common.util",
     ],
     srcs: [
         "main.cpp",
         "Face.cpp",
+        "FakeFaceEngine.cpp",
         "Session.cpp",
     ],
+    static_libs: ["libandroid.hardware.biometrics.face.VirtualProps"],
+}
+
+sysprop_library {
+    name: "android.hardware.biometrics.face.VirtualProps",
+    srcs: ["face.sysprop"],
+    property_owner: "Vendor",
+    vendor: true,
+}
+
+cc_test {
+    name: "android.hardware.biometrics.face.FakeFaceEngineTest",
+    srcs: [
+        "tests/FakeFaceEngineTest.cpp",
+        "FakeFaceEngine.cpp",
+    ],
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+    ],
+    static_libs: [
+        "libandroid.hardware.biometrics.face.VirtualProps",
+        "android.hardware.biometrics.face-V2-ndk",
+        "android.hardware.biometrics.common-V2-ndk",
+        "android.hardware.keymaster-V3-ndk",
+        "android.hardware.biometrics.common.util",
+    ],
+    vendor: true,
+    test_suites: ["general-tests"],
+    require_root: true,
 }
diff --git a/biometrics/face/aidl/default/Face.cpp b/biometrics/face/aidl/default/Face.cpp
index aca3e13..652a7e1 100644
--- a/biometrics/face/aidl/default/Face.cpp
+++ b/biometrics/face/aidl/default/Face.cpp
@@ -17,12 +17,14 @@
 #include "Face.h"
 #include "Session.h"
 
+#include "FakeFaceEngine.h"
+
 namespace aidl::android::hardware::biometrics::face {
 
 const int kSensorId = 4;
-const common::SensorStrength kSensorStrength = common::SensorStrength::STRONG;
+const common::SensorStrength kSensorStrength = FakeFaceEngine::GetSensorStrength();
 const int kMaxEnrollmentsPerUser = 5;
-const FaceSensorType kSensorType = FaceSensorType::RGB;
+const FaceSensorType kSensorType = FakeFaceEngine::GetSensorType();
 const bool kHalControlsPreview = true;
 const std::string kHwComponentId = "faceSensor";
 const std::string kHardwareVersion = "vendor/model/revision";
@@ -69,7 +71,7 @@
 ndk::ScopedAStatus Face::createSession(int32_t /*sensorId*/, int32_t /*userId*/,
                                        const std::shared_ptr<ISessionCallback>& cb,
                                        std::shared_ptr<ISession>* return_val) {
-    *return_val = SharedRefBase::make<Session>(cb);
+    *return_val = SharedRefBase::make<Session>(std::make_unique<FakeFaceEngine>(), cb);
     return ndk::ScopedAStatus::ok();
 }
 
diff --git a/biometrics/face/aidl/default/FakeFaceEngine.cpp b/biometrics/face/aidl/default/FakeFaceEngine.cpp
new file mode 100644
index 0000000..0f088f4
--- /dev/null
+++ b/biometrics/face/aidl/default/FakeFaceEngine.cpp
@@ -0,0 +1,318 @@
+#include "FakeFaceEngine.h"
+
+#include <android-base/logging.h>
+
+#include <face.sysprop.h>
+
+#include "util/CancellationSignal.h"
+#include "util/Util.h"
+
+using namespace ::android::face::virt;
+
+namespace aidl::android::hardware::biometrics::face {
+
+FaceSensorType FakeFaceEngine::GetSensorType() {
+    std::string type = FaceHalProperties::type().value_or("");
+    if (type == "IR") {
+        return FaceSensorType::IR;
+    } else {
+        FaceHalProperties::type("RGB");
+        return FaceSensorType::RGB;
+    }
+}
+
+common::SensorStrength FakeFaceEngine::GetSensorStrength() {
+    std::string strength = FaceHalProperties::strength().value_or("");
+    if (strength == "convenience") {
+        return common::SensorStrength::CONVENIENCE;
+    } else if (strength == "weak") {
+        return common::SensorStrength::WEAK;
+    } else {
+        FaceHalProperties::strength("strong");
+        return common::SensorStrength::STRONG;
+    }
+}
+
+void FakeFaceEngine::generateChallengeImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+    std::uniform_int_distribution<int64_t> dist;
+    auto challenge = dist(mRandom);
+    FaceHalProperties::challenge(challenge);
+    cb->onChallengeGenerated(challenge);
+}
+
+void FakeFaceEngine::revokeChallengeImpl(ISessionCallback* cb, int64_t challenge) {
+    BEGIN_OP(0);
+    FaceHalProperties::challenge({});
+    cb->onChallengeRevoked(challenge);
+}
+void FakeFaceEngine::getEnrollmentConfigImpl(ISessionCallback* /*cb*/,
+                                             std::vector<EnrollmentStageConfig>* /*return_val*/) {}
+void FakeFaceEngine::enrollImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& hat,
+                                EnrollmentType /*enrollmentType*/,
+                                const std::vector<Feature>& /*features*/,
+                                const std::future<void>& cancel) {
+    BEGIN_OP(FaceHalProperties::operation_start_enroll_latency().value_or(0));
+    // format is "<id>,<bucket_id>:<delay>:<succeeds>,<bucket_id>:<delay>:<succeeds>...
+    auto nextEnroll = FaceHalProperties::next_enrollment().value_or("");
+    // Erase the next enrollment
+    FaceHalProperties::next_enrollment({});
+
+    AuthenticationFrame frame;
+    frame.data.acquiredInfo = AcquiredInfo::START;
+    frame.data.vendorCode = 0;
+    cb->onAuthenticationFrame(frame);
+
+    // Do proper HAT verification in the real implementation.
+    if (hat.mac.empty()) {
+        LOG(ERROR) << "Fail: hat";
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
+        return;
+    }
+
+    if (FaceHalProperties::operation_enroll_fails().value_or(false)) {
+        LOG(ERROR) << "Fail: operation_enroll_fails";
+        cb->onError(Error::VENDOR, 0 /* vendorError */);
+        return;
+    }
+
+    auto parts = Util::split(nextEnroll, ",");
+    if (parts.size() < 2) {
+        LOG(ERROR) << "Fail: invalid next_enrollment for : " << nextEnroll;
+        cb->onError(Error::VENDOR, 0 /* vendorError */);
+        return;
+    }
+
+    auto enrollmentId = std::stoi(parts[0]);
+    const int numBuckets = parts.size() - 1;
+    for (size_t i = 1; i < parts.size(); i++) {
+        auto enrollHit = Util::split(parts[i], ":");
+        if (enrollHit.size() != 3) {
+            LOG(ERROR) << "Error when unpacking enrollment hit: " << parts[i];
+            cb->onError(Error::VENDOR, 0 /* vendorError */);
+        }
+        std::string bucket = enrollHit[0];
+        std::string delay = enrollHit[1];
+        std::string succeeds = enrollHit[2];
+
+        SLEEP_MS(std::stoi(delay));
+
+        if (shouldCancel(cancel)) {
+            LOG(ERROR) << "Fail: cancel";
+            cb->onError(Error::CANCELED, 0 /* vendorCode */);
+            return;
+        }
+
+        if (!IS_TRUE(succeeds)) {  // end and failed
+            LOG(ERROR) << "Fail: requested by caller: " << parts[i];
+            cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorCode */);
+            return;
+        }
+
+        EnrollmentFrame frame;
+
+        frame.data.acquiredInfo = AcquiredInfo::GOOD;
+        frame.data.vendorCode = 0;
+        cb->onEnrollmentFrame(frame);
+
+        frame.data.acquiredInfo = AcquiredInfo::VENDOR;
+        frame.data.vendorCode = std::stoi(bucket);
+        cb->onEnrollmentFrame(frame);
+
+        int remainingBuckets = numBuckets - i;
+        if (remainingBuckets > 0) {
+            cb->onEnrollmentProgress(enrollmentId, remainingBuckets);
+        }
+    }
+
+    auto enrollments = FaceHalProperties::enrollments();
+    enrollments.push_back(enrollmentId);
+    FaceHalProperties::enrollments(enrollments);
+    LOG(INFO) << "enrolled : " << enrollmentId;
+    cb->onEnrollmentProgress(enrollmentId, 0);
+}
+
+void FakeFaceEngine::authenticateImpl(ISessionCallback* cb, int64_t /*operationId*/,
+                                      const std::future<void>& cancel) {
+    BEGIN_OP(FaceHalProperties::operation_authenticate_latency().value_or(0));
+
+    // Signal to the framework that we have begun authenticating.
+    AuthenticationFrame frame;
+    frame.data.acquiredInfo = AcquiredInfo::START;
+    frame.data.vendorCode = 0;
+    cb->onAuthenticationFrame(frame);
+
+    // Also signal that we have opened the camera.
+    frame = {};
+    frame.data.acquiredInfo = AcquiredInfo::FIRST_FRAME_RECEIVED;
+    frame.data.vendorCode = 0;
+    cb->onAuthenticationFrame(frame);
+
+    auto now = Util::getSystemNanoTime();
+    int64_t duration = FaceHalProperties::operation_authenticate_duration().value_or(0);
+    if (duration > 0) {
+        do {
+            SLEEP_MS(5);
+        } while (!Util::hasElapsed(now, duration));
+    }
+
+    if (FaceHalProperties::operation_authenticate_fails().value_or(false)) {
+        LOG(ERROR) << "Fail: operation_authenticate_fails";
+        cb->onError(Error::VENDOR, 0 /* vendorError */);
+        return;
+    }
+
+    if (FaceHalProperties::lockout().value_or(false)) {
+        LOG(ERROR) << "Fail: lockout";
+        cb->onLockoutPermanent();
+        cb->onError(Error::HW_UNAVAILABLE, 0 /* vendorError */);
+        return;
+    }
+
+    if (shouldCancel(cancel)) {
+        LOG(ERROR) << "Fail: cancel";
+        cb->onError(Error::CANCELED, 0 /* vendorCode */);
+        return;
+    }
+
+    auto id = FaceHalProperties::enrollment_hit().value_or(0);
+    auto enrolls = FaceHalProperties::enrollments();
+    auto isEnrolled = std::find(enrolls.begin(), enrolls.end(), id) != enrolls.end();
+    if (id < 0 || !isEnrolled) {
+        LOG(ERROR) << (isEnrolled ? "invalid enrollment hit" : "Fail: not enrolled");
+        cb->onAuthenticationFailed();
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
+        return;
+    }
+
+    cb->onAuthenticationSucceeded(id, {} /* hat */);
+}
+
+void FakeFaceEngine::detectInteractionImpl(ISessionCallback* cb, const std::future<void>& cancel) {
+    BEGIN_OP(FaceHalProperties::operation_detect_interaction_latency().value_or(0));
+
+    if (FaceHalProperties::operation_detect_interaction_fails().value_or(false)) {
+        LOG(ERROR) << "Fail: operation_detect_interaction_fails";
+        cb->onError(Error::VENDOR, 0 /* vendorError */);
+        return;
+    }
+
+    if (shouldCancel(cancel)) {
+        LOG(ERROR) << "Fail: cancel";
+        cb->onError(Error::CANCELED, 0 /* vendorCode */);
+        return;
+    }
+
+    auto id = FaceHalProperties::enrollment_hit().value_or(0);
+    auto enrolls = FaceHalProperties::enrollments();
+    auto isEnrolled = std::find(enrolls.begin(), enrolls.end(), id) != enrolls.end();
+    if (id <= 0 || !isEnrolled) {
+        LOG(ERROR) << "Fail: not enrolled";
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
+        return;
+    }
+
+    cb->onInteractionDetected();
+}
+
+void FakeFaceEngine::enumerateEnrollmentsImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+    std::vector<int32_t> enrollments;
+    for (const auto& enrollmentId : FaceHalProperties::enrollments()) {
+        if (enrollmentId) {
+            enrollments.push_back(*enrollmentId);
+        }
+    }
+    cb->onEnrollmentsEnumerated(enrollments);
+}
+
+void FakeFaceEngine::removeEnrollmentsImpl(ISessionCallback* cb,
+                                           const std::vector<int32_t>& enrollmentIds) {
+    BEGIN_OP(0);
+
+    std::vector<std::optional<int32_t>> newEnrollments;
+    for (const auto& enrollment : FaceHalProperties::enrollments()) {
+        auto id = enrollment.value_or(0);
+        if (std::find(enrollmentIds.begin(), enrollmentIds.end(), id) == enrollmentIds.end()) {
+            newEnrollments.emplace_back(id);
+        }
+    }
+    FaceHalProperties::enrollments(newEnrollments);
+    cb->onEnrollmentsRemoved(enrollmentIds);
+}
+
+void FakeFaceEngine::getFeaturesImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+
+    if (FaceHalProperties::enrollments().empty()) {
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorCode */);
+        return;
+    }
+
+    std::vector<Feature> featuresToReturn = {};
+    for (const auto& feature : FaceHalProperties::features()) {
+        if (feature) {
+            featuresToReturn.push_back((Feature)(*feature));
+        }
+    }
+    cb->onFeaturesRetrieved(featuresToReturn);
+}
+
+void FakeFaceEngine::setFeatureImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& hat,
+                                    Feature feature, bool enabled) {
+    BEGIN_OP(0);
+
+    if (FaceHalProperties::enrollments().empty()) {
+        LOG(ERROR) << "Unable to set feature, enrollments are empty";
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorCode */);
+        return;
+    }
+
+    if (hat.mac.empty()) {
+        LOG(ERROR) << "Unable to set feature, invalid hat";
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorCode */);
+        return;
+    }
+
+    auto features = FaceHalProperties::features();
+
+    auto itr = std::find_if(features.begin(), features.end(), [feature](const auto& theFeature) {
+        return *theFeature == (int)feature;
+    });
+
+    if (!enabled && (itr != features.end())) {
+        features.erase(itr);
+    } else if (enabled && (itr == features.end())) {
+        features.push_back((int)feature);
+    }
+
+    FaceHalProperties::features(features);
+    cb->onFeatureSet(feature);
+}
+
+void FakeFaceEngine::getAuthenticatorIdImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+    // If this is a weak HAL return 0 per the spec.
+    if (GetSensorStrength() != common::SensorStrength::STRONG) {
+        cb->onAuthenticatorIdRetrieved(0);
+    } else {
+        cb->onAuthenticatorIdRetrieved(FaceHalProperties::authenticator_id().value_or(0));
+    }
+}
+
+void FakeFaceEngine::invalidateAuthenticatorIdImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+    int64_t authenticatorId = FaceHalProperties::authenticator_id().value_or(0);
+    int64_t newId = authenticatorId + 1;
+    FaceHalProperties::authenticator_id(newId);
+    cb->onAuthenticatorIdInvalidated(newId);
+}
+
+void FakeFaceEngine::resetLockoutImpl(ISessionCallback* cb,
+                                      const keymaster::HardwareAuthToken& /*hat*/) {
+    BEGIN_OP(0);
+    FaceHalProperties::lockout(false);
+    cb->onLockoutCleared();
+}
+
+}  // namespace aidl::android::hardware::biometrics::face
\ No newline at end of file
diff --git a/biometrics/face/aidl/default/FakeFaceEngine.h b/biometrics/face/aidl/default/FakeFaceEngine.h
new file mode 100644
index 0000000..edb54ce
--- /dev/null
+++ b/biometrics/face/aidl/default/FakeFaceEngine.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <aidl/android/hardware/biometrics/common/SensorStrength.h>
+#include <aidl/android/hardware/biometrics/face/BnSession.h>
+#include <aidl/android/hardware/biometrics/face/FaceSensorType.h>
+#include <aidl/android/hardware/biometrics/face/ISessionCallback.h>
+
+#include <random>
+
+#include <future>
+#include <vector>
+
+namespace aidl::android::hardware::biometrics::face {
+
+namespace face = aidl::android::hardware::biometrics::face;
+namespace common = aidl::android::hardware::biometrics::common;
+namespace keymaster = aidl::android::hardware::keymaster;
+
+using aidl::android::hardware::common::NativeHandle;
+// A fake engine that is backed by system properties instead of hardware.
+class FakeFaceEngine {
+  public:
+    FakeFaceEngine() : mRandom(std::mt19937::default_seed) {}
+
+    static face::FaceSensorType GetSensorType();
+    static common::SensorStrength GetSensorStrength();
+    void generateChallengeImpl(ISessionCallback* cb);
+    void revokeChallengeImpl(ISessionCallback* cb, int64_t challenge);
+    void getEnrollmentConfigImpl(ISessionCallback* cb,
+                                 std::vector<EnrollmentStageConfig>* return_val);
+    void enrollImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& hat,
+                    EnrollmentType enrollmentType, const std::vector<Feature>& features,
+                    const std::future<void>& cancel);
+    void authenticateImpl(ISessionCallback* cb, int64_t operationId,
+                          const std::future<void>& cancel);
+    void detectInteractionImpl(ISessionCallback* cb, const std::future<void>& cancel);
+    void enumerateEnrollmentsImpl(ISessionCallback* cb);
+    void removeEnrollmentsImpl(ISessionCallback* cb, const std::vector<int32_t>& enrollmentIds);
+    void getFeaturesImpl(ISessionCallback* cb);
+    void setFeatureImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& hat,
+                        Feature feature, bool enabled);
+    void getAuthenticatorIdImpl(ISessionCallback* cb);
+    void invalidateAuthenticatorIdImpl(ISessionCallback* cb);
+    void resetLockoutImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& /*hat*/);
+
+    std::mt19937 mRandom;
+};
+
+}  // namespace aidl::android::hardware::biometrics::face
\ No newline at end of file
diff --git a/biometrics/face/aidl/default/README.md b/biometrics/face/aidl/default/README.md
new file mode 100644
index 0000000..1655973
--- /dev/null
+++ b/biometrics/face/aidl/default/README.md
@@ -0,0 +1,77 @@
+# Virtual Face HAL
+
+This is a virtual HAL implementation that is backed by system properties
+instead of actual hardware. It's intended for testing and UI development
+on debuggable builds to allow devices to masquerade as alternative device
+types and for emulators.
+
+## Device Selection
+
+You can either run the FakeFaceEngine on a [real device](#actual-device) or a [virtual device/cuttlefish](#getting-started-on-a-virtual-device-cuttlefish). This document should
+help you to get started on either one.
+
+After setting up a device, go ahead and try out [enrolling](#enrolling) & [authenticating](#authenticating)
+
+### Getting started on a Virtual Device (cuttlefish)
+
+
+Note, I'm running this via a cloudtop virtual device.
+
+1. Setup cuttlefish on cloudtop, See [this](https://g3doc.corp.google.com/company/teams/android/teampages/acloud/getting_started.md?cl=head) for more details.
+2. acloud create --local-image
+3. Enter in the shell command to disable hidl
+
+```shell
+$ adb root
+$ adb shell settings put secure com.android.server.biometrics.AuthService.hidlDisabled 1
+$ adb reboot
+```
+4. You should now be able to do fake enrollments and authentications (as seen down below)
+
+### Actual Device
+
+1. Modify your real devices make file (I.E. vendor/google/products/{YOUR_DEVICE}.mk)
+2. Ensure that there is no other face HAL that is being included by the device
+3. Add the following
+```
+PRODUCT_COPY_FILES += \
+    frameworks/native/data/etc/android.hardware.biometrics.face.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.hardware.biometrics.face.xml
+
+PRODUCT_PACKAGES += \
+    android.hardware.biometrics.face-service.example \
+
+```
+4. Now build and flash m -j120 && flash
+5. Run the following commands
+
+```shell
+# This is a temporary workaround
+$ adb root
+$ adb shell setprop persist.vendor.face.virtual.type RGB
+$ adb shell setprop persist.vendor.face.virtual.strength strong
+$ adb shell locksettings set-pin 0000
+$ adb reboot
+```
+
+## Enrolling
+
+```shell
+# authenticar_id,bucket_id:duration:(true|false)....
+$ adb shell setprop vendor.face.virtual.next_enrollment 1,0:500:true,5:250:true,10:150:true,15:500:true
+$ adb shell am start -n com.android.settings/.biometrics.face.FaceEnrollIntroduction
+# If you would like to get rid of the enrollment, run the follwoing command
+$ adb shell setprop persist.vendor.face.virtual.enrollments \"\"
+```
+
+## Authenticating
+
+```shell
+# If enrollment hasn't been setup
+$ adb shell setprop persist.vendor.face.virtual.enrollments 1
+$ adb shell cmd face sync
+# After enrollment has been setup
+$ adb shell setprop vendor.face.virtual.operation_authenticate_duration 800
+$ adb shell setprop vendor.face.virtual.enrollment_hit 1
+# Power button press to simulate auth
+$ adb shell input keyevent 26
+```
diff --git a/biometrics/face/aidl/default/Session.cpp b/biometrics/face/aidl/default/Session.cpp
index 984a1a9..1188459 100644
--- a/biometrics/face/aidl/default/Session.cpp
+++ b/biometrics/face/aidl/default/Session.cpp
@@ -14,139 +14,135 @@
  * limitations under the License.
  */
 
-#include <aidl/android/hardware/biometrics/common/BnCancellationSignal.h>
 #include <android-base/logging.h>
 
 #include "Session.h"
 
 namespace aidl::android::hardware::biometrics::face {
 
-class CancellationSignal : public common::BnCancellationSignal {
-  private:
-    std::shared_ptr<ISessionCallback> cb_;
+constexpr size_t MAX_WORKER_QUEUE_SIZE = 5;
 
-  public:
-    explicit CancellationSignal(std::shared_ptr<ISessionCallback> cb) : cb_(std::move(cb)) {}
-
-    ndk::ScopedAStatus cancel() override {
-        cb_->onError(Error::CANCELED, 0 /* vendorCode */);
-        return ndk::ScopedAStatus::ok();
-    }
-};
-
-Session::Session(std::shared_ptr<ISessionCallback> cb)
-    : cb_(std::move(cb)), mRandom(std::mt19937::default_seed) {}
+Session::Session(std::unique_ptr<FakeFaceEngine> engine, std::shared_ptr<ISessionCallback> cb)
+    : mEngine(std::move(engine)), mCb(std::move(cb)), mRandom(std::mt19937::default_seed) {
+    mThread = std::make_unique<WorkerThread>(MAX_WORKER_QUEUE_SIZE);
+}
 
 ndk::ScopedAStatus Session::generateChallenge() {
     LOG(INFO) << "generateChallenge";
-    if (cb_) {
-        std::uniform_int_distribution<int64_t> dist;
-        auto challenge = dist(mRandom);
-        cb_->onChallengeGenerated(challenge);
-    }
+    mThread->schedule(Callable::from([this] { mEngine->generateChallengeImpl(mCb.get()); }));
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::revokeChallenge(int64_t challenge) {
     LOG(INFO) << "revokeChallenge";
-    if (cb_) {
-        cb_->onChallengeRevoked(challenge);
-    }
+    mThread->schedule(Callable::from(
+            [this, challenge] { mEngine->revokeChallengeImpl(mCb.get(), challenge); }));
     return ndk::ScopedAStatus::ok();
 }
 
-ndk::ScopedAStatus Session::getEnrollmentConfig(EnrollmentType /*enrollmentType*/,
-                                                std::vector<EnrollmentStageConfig>* return_val) {
-    *return_val = {};
+ndk::ScopedAStatus Session::getEnrollmentConfig(
+        EnrollmentType /*enrollmentType*/, std::vector<EnrollmentStageConfig>* cancellationSignal) {
+    *cancellationSignal = {};
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::enroll(
-        const keymaster::HardwareAuthToken& /*hat*/, EnrollmentType /*enrollmentType*/,
-        const std::vector<Feature>& /*features*/,
-        const std::optional<NativeHandle>& /*previewSurface*/,
-        std::shared_ptr<biometrics::common::ICancellationSignal>* /*return_val*/) {
+        const keymaster::HardwareAuthToken& hat, EnrollmentType enrollmentType,
+        const std::vector<Feature>& features, const std::optional<NativeHandle>& /*previewSurface*/,
+        std::shared_ptr<biometrics::common::ICancellationSignal>* cancellationSignal) {
     LOG(INFO) << "enroll";
-    if (cb_) {
-        cb_->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
-    }
+    std::promise<void> cancellationPromise;
+    auto cancFuture = cancellationPromise.get_future();
+
+    mThread->schedule(Callable::from(
+            [this, hat, enrollmentType, features, cancFuture = std::move(cancFuture)] {
+                mEngine->enrollImpl(mCb.get(), hat, enrollmentType, features, cancFuture);
+            }));
+
+    *cancellationSignal = SharedRefBase::make<CancellationSignal>(std::move(cancellationPromise));
     return ndk::ScopedAStatus::ok();
 }
 
-ndk::ScopedAStatus Session::authenticate(int64_t /*keystoreOperationId*/,
-                                         std::shared_ptr<common::ICancellationSignal>* return_val) {
+ndk::ScopedAStatus Session::authenticate(
+        int64_t keystoreOperationId,
+        std::shared_ptr<common::ICancellationSignal>* cancellationSignal) {
     LOG(INFO) << "authenticate";
-    if (cb_) {
-        cb_->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorCode */);
-    }
-    *return_val = SharedRefBase::make<CancellationSignal>(cb_);
+    std::promise<void> cancellationPromise;
+    auto cancFuture = cancellationPromise.get_future();
+
+    mThread->schedule(
+            Callable::from([this, keystoreOperationId, cancFuture = std::move(cancFuture)] {
+                mEngine->authenticateImpl(mCb.get(), keystoreOperationId, cancFuture);
+            }));
+
+    *cancellationSignal = SharedRefBase::make<CancellationSignal>(std::move(cancellationPromise));
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::detectInteraction(
-        std::shared_ptr<common::ICancellationSignal>* /*return_val*/) {
+        std::shared_ptr<common::ICancellationSignal>* cancellationSignal) {
     LOG(INFO) << "detectInteraction";
+    std::promise<void> cancellationPromise;
+    auto cancFuture = cancellationPromise.get_future();
+
+    mThread->schedule(Callable::from([this, cancFuture = std::move(cancFuture)] {
+        mEngine->detectInteractionImpl(mCb.get(), cancFuture);
+    }));
+
+    *cancellationSignal = SharedRefBase::make<CancellationSignal>(std::move(cancellationPromise));
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::enumerateEnrollments() {
     LOG(INFO) << "enumerateEnrollments";
-    if (cb_) {
-        cb_->onEnrollmentsEnumerated(std::vector<int32_t>());
-    }
+    mThread->schedule(Callable::from([this] { mEngine->enumerateEnrollmentsImpl(mCb.get()); }));
     return ndk::ScopedAStatus::ok();
 }
 
-ndk::ScopedAStatus Session::removeEnrollments(const std::vector<int32_t>& /*enrollmentIds*/) {
+ndk::ScopedAStatus Session::removeEnrollments(const std::vector<int32_t>& enrollmentIds) {
     LOG(INFO) << "removeEnrollments";
-    if (cb_) {
-        cb_->onEnrollmentsRemoved(std::vector<int32_t>());
-    }
+    mThread->schedule(Callable::from(
+            [this, enrollmentIds] { mEngine->removeEnrollmentsImpl(mCb.get(), enrollmentIds); }));
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::getFeatures() {
     LOG(INFO) << "getFeatures";
-    if (cb_) {
-        // Must error out with UNABLE_TO_PROCESS when no faces are enrolled.
-        cb_->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorCode */);
-    }
+    mThread->schedule(Callable::from([this] { mEngine->getFeaturesImpl(mCb.get()); }));
     return ndk::ScopedAStatus::ok();
 }
 
-ndk::ScopedAStatus Session::setFeature(const keymaster::HardwareAuthToken& /*hat*/,
-                                       Feature /*feature*/, bool /*enabled*/) {
+ndk::ScopedAStatus Session::setFeature(const keymaster::HardwareAuthToken& hat, Feature feature,
+                                       bool enabled) {
     LOG(INFO) << "setFeature";
+    mThread->schedule(Callable::from([this, hat, feature, enabled] {
+        mEngine->setFeatureImpl(mCb.get(), hat, feature, enabled);
+    }));
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::getAuthenticatorId() {
     LOG(INFO) << "getAuthenticatorId";
-    if (cb_) {
-        cb_->onAuthenticatorIdRetrieved(0 /* authenticatorId */);
-    }
+    mThread->schedule(Callable::from([this] { mEngine->getAuthenticatorIdImpl(mCb.get()); }));
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::invalidateAuthenticatorId() {
     LOG(INFO) << "invalidateAuthenticatorId";
-    if (cb_) {
-        cb_->onAuthenticatorIdInvalidated(0);
-    }
+    mThread->schedule(
+            Callable::from([this] { mEngine->invalidateAuthenticatorIdImpl(mCb.get()); }));
     return ndk::ScopedAStatus::ok();
 }
 
-ndk::ScopedAStatus Session::resetLockout(const keymaster::HardwareAuthToken& /*hat*/) {
+ndk::ScopedAStatus Session::resetLockout(const keymaster::HardwareAuthToken& hat) {
     LOG(INFO) << "resetLockout";
-    if (cb_) {
-        cb_->onLockoutCleared();
-    }
+    mThread->schedule(Callable::from([this, hat] { mEngine->resetLockoutImpl(mCb.get(), hat); }));
     return ndk::ScopedAStatus::ok();
 }
 
 ndk::ScopedAStatus Session::close() {
-    if (cb_) {
-        cb_->onSessionClosed();
+    if (mCb) {
+        mCb->onSessionClosed();
     }
     return ndk::ScopedAStatus::ok();
 }
diff --git a/biometrics/face/aidl/default/Session.h b/biometrics/face/aidl/default/Session.h
index 9db17d2..7ca6a1f 100644
--- a/biometrics/face/aidl/default/Session.h
+++ b/biometrics/face/aidl/default/Session.h
@@ -21,6 +21,10 @@
 #include <aidl/android/hardware/biometrics/face/BnSession.h>
 #include <aidl/android/hardware/biometrics/face/ISessionCallback.h>
 
+#include "FakeFaceEngine.h"
+#include "thread/WorkerThread.h"
+#include "util/CancellationSignal.h"
+
 namespace aidl::android::hardware::biometrics::face {
 
 namespace common = aidl::android::hardware::biometrics::common;
@@ -30,7 +34,7 @@
 
 class Session : public BnSession {
   public:
-    explicit Session(std::shared_ptr<ISessionCallback> cb);
+    explicit Session(std::unique_ptr<FakeFaceEngine> engine, std::shared_ptr<ISessionCallback> cb);
 
     ndk::ScopedAStatus generateChallenge() override;
 
@@ -85,8 +89,11 @@
     ndk::ScopedAStatus onContextChanged(const common::OperationContext& context) override;
 
   private:
-    std::shared_ptr<ISessionCallback> cb_;
+    std::unique_ptr<FakeFaceEngine> mEngine;
+    std::shared_ptr<ISessionCallback> mCb;
     std::mt19937 mRandom;
+    std::unique_ptr<WorkerThread> mThread;
+    std::shared_ptr<CancellationSignal> mCancellationSignal;
 };
 
 }  // namespace aidl::android::hardware::biometrics::face
diff --git a/biometrics/face/aidl/default/api/android.hardware.biometrics.face.VirtualProps-current.txt b/biometrics/face/aidl/default/api/android.hardware.biometrics.face.VirtualProps-current.txt
new file mode 100644
index 0000000..9548920
--- /dev/null
+++ b/biometrics/face/aidl/default/api/android.hardware.biometrics.face.VirtualProps-current.txt
@@ -0,0 +1,98 @@
+props {
+  owner: Vendor
+  module: "android.face.virt.FaceHalProperties"
+  prop {
+    api_name: "authenticator_id"
+    type: Long
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.authenticator_id"
+  }
+  prop {
+    api_name: "challenge"
+    type: Long
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.challenge"
+  }
+  prop {
+    api_name: "enrollment_hit"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.enrollment_hit"
+  }
+  prop {
+    api_name: "enrollments"
+    type: IntegerList
+    access: ReadWrite
+    prop_name: "persist.vendor.face.virtual.enrollments"
+  }
+  prop {
+    api_name: "features"
+    type: IntegerList
+    access: ReadWrite
+    prop_name: "persist.vendor.face.virtual.features"
+  }
+  prop {
+    api_name: "lockout"
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.lockout"
+  }
+  prop {
+    api_name: "next_enrollment"
+    type: String
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.next_enrollment"
+  }
+  prop {
+    api_name: "operation_authenticate_duration"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.operation_authenticate_duration"
+  }
+  prop {
+    api_name: "operation_authenticate_fails"
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.operation_authenticate_fails"
+  }
+  prop {
+    api_name: "operation_authenticate_latency"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.operation_authenticate_latency"
+  }
+  prop {
+    api_name: "operation_detect_interaction_fails"
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.operation_detect_interaction_fails"
+  }
+  prop {
+    api_name: "operation_detect_interaction_latency"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.operation_detect_interaction_latency"
+  }
+  prop {
+    api_name: "operation_enroll_fails"
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.operation_enroll_fails"
+  }
+  prop {
+    api_name: "operation_start_enroll_latency"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.face.virtual.operation_start_enroll_latency"
+  }
+  prop {
+    api_name: "strength"
+    type: String
+    access: ReadWrite
+    prop_name: "persist.vendor.face.virtual.strength"
+    enum_values: "convenience|weak|strong"
+  }
+  prop {
+    api_name: "type"
+    type: String
+    access: ReadWrite
+    prop_name: "persist.vendor.face.virtual.type"
+    enum_values: "IR|RGB"
+  }
+}
diff --git a/biometrics/face/aidl/default/face.sysprop b/biometrics/face/aidl/default/face.sysprop
new file mode 100644
index 0000000..6b0f37f
--- /dev/null
+++ b/biometrics/face/aidl/default/face.sysprop
@@ -0,0 +1,159 @@
+# face.sysprop
+# module becomes static class (Java) / namespace (C++) for serving API
+module: "android.face.virt.FaceHalProperties"
+owner: Vendor
+
+# type of face sensor
+prop {
+    prop_name: "persist.vendor.face.virtual.type"
+    type: String
+    scope: Public
+    access: ReadWrite
+    enum_values: "IR|RGB"
+    api_name: "type"
+}
+
+# the strength of the sensor
+prop {
+    prop_name: "persist.vendor.face.virtual.strength"
+    type: String
+    scope: Public
+    access: ReadWrite
+    enum_values: "convenience|weak|strong"
+    api_name: "strength"
+}
+
+# ids of current enrollments
+prop {
+    prop_name: "persist.vendor.face.virtual.enrollments"
+    type: IntegerList
+    scope: Public
+    access: ReadWrite
+    api_name: "enrollments"
+}
+
+# List of features
+prop {
+    prop_name: "persist.vendor.face.virtual.features"
+    type: IntegerList
+    scope: Public
+    access: ReadWrite
+    api_name: "features"
+}
+
+# authenticate and detectInteraction will succeed with this
+# enrollment id, when present, otherwise they will error
+prop {
+    prop_name: "vendor.face.virtual.enrollment_hit"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "enrollment_hit"
+}
+
+# The initial latency for enrollment
+prop {
+    prop_name: "vendor.face.virtual.operation_start_enroll_latency"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_start_enroll_latency"
+}
+
+# the next enrollment in the format:
+# "<id>,<bucket_id>:<delay>:<succeeds>,<bucket_id>..."
+# for example: "0:1,0:100:1,1:200:1" indicating that bucket 0 took
+# 50 milliseconds, bucket 1 took 100 milliseconds, bucket 2 took 200 milliseconds.
+# Note that it is up to the configuration to determine how many buckets are required
+# to complete an enrollment
+prop {
+    prop_name: "vendor.face.virtual.next_enrollment"
+    type: String
+    scope: Public
+    access: ReadWrite
+    api_name: "next_enrollment"
+}
+
+# value for getAuthenticatorId or 0
+prop {
+    prop_name: "vendor.face.virtual.authenticator_id"
+    type: Long
+    scope: Public
+    access: ReadWrite
+    api_name: "authenticator_id"
+}
+
+# value for generateChallenge
+prop {
+    prop_name: "vendor.face.virtual.challenge"
+    type: Long
+    scope: Public
+    access: ReadWrite
+    api_name: "challenge"
+}
+
+# if locked out
+prop {
+    prop_name: "vendor.face.virtual.lockout"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "lockout"
+}
+
+# force all authenticate operations to fail
+prop {
+    prop_name: "vendor.face.virtual.operation_authenticate_fails"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_authenticate_fails"
+}
+
+# force all detectInteraction operations to fail
+prop {
+    prop_name: "vendor.face.virtual.operation_detect_interaction_fails"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_detect_interaction_fails"
+}
+
+# force all enroll operations to fail
+prop {
+    prop_name: "vendor.face.virtual.operation_enroll_fails"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_enroll_fails"
+}
+
+# add a latency to authentication operations
+# Note that this latency is the initial authentication latency that occurs before
+# the HAL will send AcquiredInfo::START and AcquiredInfo::FIRST_FRAME_RECEIVED
+prop {
+    prop_name: "vendor.face.virtual.operation_authenticate_latency"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_authenticate_latency"
+}
+
+# add a latency to detectInteraction operations
+prop {
+    prop_name: "vendor.face.virtual.operation_detect_interaction_latency"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_detect_interaction_latency"
+}
+
+# millisecond duration for authenticate operations
+# (waits for changes to enrollment_hit)
+prop {
+    prop_name: "vendor.face.virtual.operation_authenticate_duration"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_authenticate_duration"
+}
diff --git a/biometrics/face/aidl/default/tests/FakeFaceEngineTest.cpp b/biometrics/face/aidl/default/tests/FakeFaceEngineTest.cpp
new file mode 100644
index 0000000..c8ad6b7
--- /dev/null
+++ b/biometrics/face/aidl/default/tests/FakeFaceEngineTest.cpp
@@ -0,0 +1,383 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <android/binder_process.h>
+#include <face.sysprop.h>
+#include <gtest/gtest.h>
+
+#include <aidl/android/hardware/biometrics/face/BnSessionCallback.h>
+#include <android-base/logging.h>
+
+#include "FakeFaceEngine.h"
+
+using namespace ::android::face::virt;
+using namespace ::aidl::android::hardware::biometrics::face;
+using namespace ::aidl::android::hardware::keymaster;
+
+namespace aidl::android::hardware::biometrics::face {
+
+class TestSessionCallback : public BnSessionCallback {
+  public:
+    ndk::ScopedAStatus onChallengeGenerated(int64_t challenge) override {
+        mLastChallenge = challenge;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onChallengeRevoked(int64_t challenge) override {
+        mLastChallengeRevoked = challenge;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onError(Error error, int32_t) override {
+        mError = error;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onEnrollmentProgress(int32_t enrollmentId, int32_t remaining) override {
+        if (remaining == 0) mLastEnrolled = enrollmentId;
+        return ndk::ScopedAStatus::ok();
+    };
+
+    ::ndk::ScopedAStatus onAuthenticationSucceeded(int32_t enrollmentId,
+                                                   const HardwareAuthToken&) override {
+        mLastAuthenticated = enrollmentId;
+        mAuthenticateFailed = false;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onAuthenticationFailed() override {
+        mLastAuthenticated = 0;
+        mAuthenticateFailed = true;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onInteractionDetected() override {
+        mInteractionDetectedCount++;
+        return ndk::ScopedAStatus::ok();
+    };
+
+    ::ndk::ScopedAStatus onEnrollmentFrame(const EnrollmentFrame& frame) override {
+        mEnrollmentFrames.push_back(frame.data.vendorCode);
+        return ndk::ScopedAStatus::ok();
+    }
+
+    ::ndk::ScopedAStatus onEnrollmentsEnumerated(
+            const std::vector<int32_t>& enrollmentIds) override {
+        mLastEnrollmentsEnumerated = enrollmentIds;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onEnrollmentsRemoved(const std::vector<int32_t>& enrollmentIds) override {
+        mLastEnrollmentRemoved = enrollmentIds;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onAuthenticatorIdRetrieved(int64_t authenticatorId) override {
+        mLastAuthenticatorId = authenticatorId;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onAuthenticatorIdInvalidated(int64_t authenticatorId) override {
+        mLastAuthenticatorId = authenticatorId;
+        mAuthenticatorIdInvalidated = true;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onAuthenticationFrame(const AuthenticationFrame& /*authFrame*/) override {
+        return ndk::ScopedAStatus::ok();
+    }
+    ::ndk::ScopedAStatus onLockoutPermanent() override {
+        mLockoutPermanent = true;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onLockoutTimed(int64_t /* timeout */) override {
+        return ndk::ScopedAStatus::ok();
+    }
+    ::ndk::ScopedAStatus onLockoutCleared() override {
+        mLockoutPermanent = false;
+        return ndk::ScopedAStatus::ok();
+    }
+    ::ndk::ScopedAStatus onSessionClosed() override { return ndk::ScopedAStatus::ok(); }
+
+    ::ndk::ScopedAStatus onFeaturesRetrieved(const std::vector<Feature>& features) override {
+        mFeatures = features;
+        return ndk::ScopedAStatus::ok();
+    }
+
+    ::ndk::ScopedAStatus onFeatureSet(Feature feature) override {
+        mLastFeatureSet = feature;
+        return ndk::ScopedAStatus::ok();
+    }
+
+    Error mError = Error::UNKNOWN;
+    int64_t mLastChallenge = -1;
+    int64_t mLastChallengeRevoked = -1;
+    int32_t mLastEnrolled = -1;
+    int32_t mLastAuthenticated = -1;
+    int64_t mLastAuthenticatorId = -1;
+    std::vector<int32_t> mLastEnrollmentsEnumerated;
+    std::vector<int32_t> mLastEnrollmentRemoved;
+    std::vector<Feature> mFeatures;
+    Feature mLastFeatureSet;
+    std::vector<int32_t> mEnrollmentFrames;
+    bool mAuthenticateFailed = false;
+    bool mAuthenticatorIdInvalidated = false;
+    bool mLockoutPermanent = false;
+    int mInteractionDetectedCount = 0;
+};
+
+class FakeFaceEngineTest : public ::testing::Test {
+  protected:
+    void SetUp() override {
+        LOG(ERROR) << "JRM SETUP";
+        mCallback = ndk::SharedRefBase::make<TestSessionCallback>();
+        FaceHalProperties::enrollments({});
+        FaceHalProperties::challenge({});
+        FaceHalProperties::features({});
+        FaceHalProperties::authenticator_id({});
+        FaceHalProperties::strength("");
+    }
+
+    FakeFaceEngine mEngine;
+    std::shared_ptr<TestSessionCallback> mCallback;
+    std::promise<void> mCancel;
+};
+
+TEST_F(FakeFaceEngineTest, one_eq_one) {
+    ASSERT_EQ(1, 1);
+}
+
+TEST_F(FakeFaceEngineTest, GenerateChallenge) {
+    mEngine.generateChallengeImpl(mCallback.get());
+    ASSERT_EQ(FaceHalProperties::challenge().value(), mCallback->mLastChallenge);
+}
+
+TEST_F(FakeFaceEngineTest, RevokeChallenge) {
+    auto challenge = FaceHalProperties::challenge().value_or(10);
+    mEngine.revokeChallengeImpl(mCallback.get(), challenge);
+    ASSERT_FALSE(FaceHalProperties::challenge().has_value());
+    ASSERT_EQ(challenge, mCallback->mLastChallengeRevoked);
+}
+
+TEST_F(FakeFaceEngineTest, ResetLockout) {
+    FaceHalProperties::lockout(true);
+    mEngine.resetLockoutImpl(mCallback.get(), {});
+    ASSERT_FALSE(mCallback->mLockoutPermanent);
+    ASSERT_FALSE(FaceHalProperties::lockout().value_or(true));
+}
+
+TEST_F(FakeFaceEngineTest, AuthenticatorId) {
+    FaceHalProperties::authenticator_id(50);
+    mEngine.getAuthenticatorIdImpl(mCallback.get());
+    ASSERT_EQ(50, mCallback->mLastAuthenticatorId);
+    ASSERT_FALSE(mCallback->mAuthenticatorIdInvalidated);
+}
+
+TEST_F(FakeFaceEngineTest, GetAuthenticatorIdWeakReturnsZero) {
+    FaceHalProperties::strength("weak");
+    FaceHalProperties::authenticator_id(500);
+    mEngine.getAuthenticatorIdImpl(mCallback.get());
+    ASSERT_EQ(0, mCallback->mLastAuthenticatorId);
+    ASSERT_FALSE(mCallback->mAuthenticatorIdInvalidated);
+}
+
+TEST_F(FakeFaceEngineTest, AuthenticatorIdInvalidate) {
+    FaceHalProperties::authenticator_id(500);
+    mEngine.invalidateAuthenticatorIdImpl(mCallback.get());
+    ASSERT_NE(500, FaceHalProperties::authenticator_id().value());
+    ASSERT_TRUE(mCallback->mAuthenticatorIdInvalidated);
+}
+
+TEST_F(FakeFaceEngineTest, Enroll) {
+    FaceHalProperties::next_enrollment("1,0:30:true,1:0:true,2:0:true,3:0:true,4:0:true");
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.enrollImpl(mCallback.get(), hat, {} /*enrollmentType*/, {} /*features*/,
+                       mCancel.get_future());
+    ASSERT_FALSE(FaceHalProperties::next_enrollment().has_value());
+    ASSERT_EQ(1, FaceHalProperties::enrollments().size());
+    ASSERT_EQ(1, FaceHalProperties::enrollments()[0].value());
+    ASSERT_EQ(1, mCallback->mLastEnrolled);
+}
+
+TEST_F(FakeFaceEngineTest, EnrollFails) {
+    FaceHalProperties::next_enrollment("1,0:30:true,1:0:true,2:0:true,3:0:true,4:0:false");
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.enrollImpl(mCallback.get(), hat, {} /*enrollmentType*/, {} /*features*/,
+                       mCancel.get_future());
+    ASSERT_FALSE(FaceHalProperties::next_enrollment().has_value());
+    ASSERT_EQ(0, FaceHalProperties::enrollments().size());
+}
+
+TEST_F(FakeFaceEngineTest, EnrollCancel) {
+    FaceHalProperties::next_enrollment("1,0:30:true,1:0:true,2:0:true,3:0:true,4:0:false");
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mCancel.set_value();
+    mEngine.enrollImpl(mCallback.get(), hat, {} /*enrollmentType*/, {} /*features*/,
+                       mCancel.get_future());
+    ASSERT_EQ(Error::CANCELED, mCallback->mError);
+    ASSERT_EQ(-1, mCallback->mLastEnrolled);
+    ASSERT_EQ(0, FaceHalProperties::enrollments().size());
+    ASSERT_FALSE(FaceHalProperties::next_enrollment().has_value());
+}
+
+TEST_F(FakeFaceEngineTest, Authenticate) {
+    FaceHalProperties::enrollments({100});
+    FaceHalProperties::enrollment_hit(100);
+    mEngine.authenticateImpl(mCallback.get(), 0 /* operationId*/, mCancel.get_future());
+
+    ASSERT_EQ(100, mCallback->mLastAuthenticated);
+    ASSERT_FALSE(mCallback->mAuthenticateFailed);
+}
+
+TEST_F(FakeFaceEngineTest, AuthenticateCancel) {
+    FaceHalProperties::enrollments({100});
+    FaceHalProperties::enrollment_hit(100);
+    mCancel.set_value();
+    mEngine.authenticateImpl(mCallback.get(), 0 /* operationId*/, mCancel.get_future());
+    ASSERT_EQ(Error::CANCELED, mCallback->mError);
+}
+
+TEST_F(FakeFaceEngineTest, AuthenticateFailedForUnEnrolled) {
+    FaceHalProperties::enrollments({3});
+    FaceHalProperties::enrollment_hit(100);
+    mEngine.authenticateImpl(mCallback.get(), 0 /* operationId*/, mCancel.get_future());
+    ASSERT_EQ(Error::UNABLE_TO_PROCESS, mCallback->mError);
+    ASSERT_TRUE(mCallback->mAuthenticateFailed);
+}
+
+TEST_F(FakeFaceEngineTest, DetectInteraction) {
+    FaceHalProperties::enrollments({100});
+    FaceHalProperties::enrollment_hit(100);
+    ASSERT_EQ(0, mCallback->mInteractionDetectedCount);
+    mEngine.detectInteractionImpl(mCallback.get(), mCancel.get_future());
+    ASSERT_EQ(1, mCallback->mInteractionDetectedCount);
+}
+
+TEST_F(FakeFaceEngineTest, DetectInteractionCancel) {
+    FaceHalProperties::enrollments({100});
+    FaceHalProperties::enrollment_hit(100);
+    mCancel.set_value();
+    mEngine.detectInteractionImpl(mCallback.get(), mCancel.get_future());
+    ASSERT_EQ(Error::CANCELED, mCallback->mError);
+}
+
+TEST_F(FakeFaceEngineTest, GetFeatureEmpty) {
+    mEngine.getFeaturesImpl(mCallback.get());
+    ASSERT_TRUE(mCallback->mFeatures.empty());
+}
+
+TEST_F(FakeFaceEngineTest, SetFeature) {
+    FaceHalProperties::enrollments({1});
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_ATTENTION, true);
+    auto features = mCallback->mFeatures;
+    ASSERT_TRUE(features.empty());
+    ASSERT_EQ(Feature::REQUIRE_ATTENTION, mCallback->mLastFeatureSet);
+
+    mEngine.getFeaturesImpl(mCallback.get());
+    features = mCallback->mFeatures;
+    ASSERT_FALSE(features.empty());
+    ASSERT_NE(features.end(),
+              std::find(features.begin(), features.end(), Feature::REQUIRE_ATTENTION));
+}
+
+TEST_F(FakeFaceEngineTest, ToggleFeature) {
+    FaceHalProperties::enrollments({1});
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_ATTENTION, true);
+    mEngine.getFeaturesImpl(mCallback.get());
+    auto features = mCallback->mFeatures;
+    ASSERT_FALSE(features.empty());
+    ASSERT_NE(features.end(),
+              std::find(features.begin(), features.end(), Feature::REQUIRE_ATTENTION));
+
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_ATTENTION, false);
+    mEngine.getFeaturesImpl(mCallback.get());
+    features = mCallback->mFeatures;
+    ASSERT_TRUE(features.empty());
+}
+
+TEST_F(FakeFaceEngineTest, TurningOffNonExistentFeatureDoesNothing) {
+    FaceHalProperties::enrollments({1});
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_ATTENTION, false);
+    mEngine.getFeaturesImpl(mCallback.get());
+    auto features = mCallback->mFeatures;
+    ASSERT_TRUE(features.empty());
+}
+
+TEST_F(FakeFaceEngineTest, SetMultipleFeatures) {
+    FaceHalProperties::enrollments({1});
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_ATTENTION, true);
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_DIVERSE_POSES, true);
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::DEBUG, true);
+    mEngine.getFeaturesImpl(mCallback.get());
+    auto features = mCallback->mFeatures;
+    ASSERT_EQ(3, features.size());
+    ASSERT_NE(features.end(),
+              std::find(features.begin(), features.end(), Feature::REQUIRE_ATTENTION));
+    ASSERT_NE(features.end(),
+              std::find(features.begin(), features.end(), Feature::REQUIRE_DIVERSE_POSES));
+    ASSERT_NE(features.end(), std::find(features.begin(), features.end(), Feature::DEBUG));
+}
+
+TEST_F(FakeFaceEngineTest, SetMultipleFeaturesAndTurnOffSome) {
+    FaceHalProperties::enrollments({1});
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_ATTENTION, true);
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::REQUIRE_DIVERSE_POSES, true);
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::DEBUG, true);
+    mEngine.setFeatureImpl(mCallback.get(), hat, Feature::DEBUG, false);
+    mEngine.getFeaturesImpl(mCallback.get());
+    auto features = mCallback->mFeatures;
+    ASSERT_EQ(2, features.size());
+    ASSERT_NE(features.end(),
+              std::find(features.begin(), features.end(), Feature::REQUIRE_ATTENTION));
+    ASSERT_NE(features.end(),
+              std::find(features.begin(), features.end(), Feature::REQUIRE_DIVERSE_POSES));
+    ASSERT_EQ(features.end(), std::find(features.begin(), features.end(), Feature::DEBUG));
+}
+
+TEST_F(FakeFaceEngineTest, Enumerate) {
+    FaceHalProperties::enrollments({120, 3});
+    mEngine.enumerateEnrollmentsImpl(mCallback.get());
+    auto enrolls = mCallback->mLastEnrollmentsEnumerated;
+    ASSERT_FALSE(enrolls.empty());
+    ASSERT_NE(enrolls.end(), std::find(enrolls.begin(), enrolls.end(), 120));
+    ASSERT_NE(enrolls.end(), std::find(enrolls.begin(), enrolls.end(), 3));
+}
+
+TEST_F(FakeFaceEngineTest, RemoveEnrollments) {
+    FaceHalProperties::enrollments({120, 3, 100});
+    mEngine.removeEnrollmentsImpl(mCallback.get(), {120, 100});
+    mEngine.enumerateEnrollmentsImpl(mCallback.get());
+    auto enrolls = mCallback->mLastEnrollmentsEnumerated;
+    ASSERT_FALSE(enrolls.empty());
+    ASSERT_EQ(enrolls.end(), std::find(enrolls.begin(), enrolls.end(), 120));
+    ASSERT_NE(enrolls.end(), std::find(enrolls.begin(), enrolls.end(), 3));
+    ASSERT_EQ(enrolls.end(), std::find(enrolls.begin(), enrolls.end(), 100));
+}
+
+TEST_F(FakeFaceEngineTest, ResetLockoutWithAuth) {
+    FaceHalProperties::lockout(true);
+    FaceHalProperties::enrollments({33});
+    FaceHalProperties::enrollment_hit(33);
+    auto cancelFuture = mCancel.get_future();
+    mEngine.authenticateImpl(mCallback.get(), 0 /* operationId*/, cancelFuture);
+
+    ASSERT_TRUE(mCallback->mLockoutPermanent);
+
+    mEngine.resetLockoutImpl(mCallback.get(), {} /* hat */);
+    ASSERT_FALSE(mCallback->mLockoutPermanent);
+    FaceHalProperties::enrollment_hit(33);
+    mEngine.authenticateImpl(mCallback.get(), 0 /* operationId*/, cancelFuture);
+    ASSERT_EQ(33, mCallback->mLastAuthenticated);
+    ASSERT_FALSE(mCallback->mAuthenticateFailed);
+}
+
+}  // namespace aidl::android::hardware::biometrics::face
\ No newline at end of file
diff --git a/biometrics/fingerprint/aidl/OWNERS b/biometrics/fingerprint/aidl/OWNERS
index 36d7261..e162d2d 100644
--- a/biometrics/fingerprint/aidl/OWNERS
+++ b/biometrics/fingerprint/aidl/OWNERS
@@ -1,2 +1,4 @@
 ilyamaty@google.com
-kchyn@google.com
+jeffpu@google.com
+jbolinger@google.com
+joshmccloskey@google.com
diff --git a/biometrics/fingerprint/aidl/default/Android.bp b/biometrics/fingerprint/aidl/default/Android.bp
index 430bf3c..2aa7bbd 100644
--- a/biometrics/fingerprint/aidl/default/Android.bp
+++ b/biometrics/fingerprint/aidl/default/Android.bp
@@ -11,14 +11,13 @@
     name: "android.hardware.biometrics.fingerprint-service.example",
     vendor: true,
     relative_install_path: "hw",
-    init_rc: ["fingerprint-default.rc"],
-    vintf_fragments: ["fingerprint-default.xml"],
+    init_rc: ["fingerprint-example.rc"],
+    vintf_fragments: ["fingerprint-example.xml"],
     local_include_dirs: ["include"],
     srcs: [
-        "CancellationSignal.cpp",
+        "FakeFingerprintEngine.cpp",
         "Fingerprint.cpp",
         "Session.cpp",
-        "WorkerThread.cpp",
         "main.cpp",
     ],
     shared_libs: [
@@ -26,18 +25,38 @@
         "libbinder_ndk",
         "android.hardware.biometrics.fingerprint-V2-ndk",
         "android.hardware.biometrics.common-V2-ndk",
+        "android.hardware.biometrics.common.thread",
+        "android.hardware.biometrics.common.util",
     ],
+    static_libs: ["libandroid.hardware.biometrics.fingerprint.VirtualProps"],
 }
 
-cc_test_host {
-    name: "android.hardware.biometrics.fingerprint.WorkerThreadTest",
+cc_test {
+    name: "android.hardware.biometrics.fingerprint.FakeFingerprintEngineTest",
     local_include_dirs: ["include"],
     srcs: [
-        "tests/WorkerThreadTest.cpp",
-        "WorkerThread.cpp",
+        "tests/FakeFingerprintEngineTest.cpp",
+        "FakeFingerprintEngine.cpp",
     ],
     shared_libs: [
-        "libcutils",
+        "libbase",
+        "libbinder_ndk",
     ],
+    static_libs: [
+        "libandroid.hardware.biometrics.fingerprint.VirtualProps",
+        "android.hardware.biometrics.fingerprint-V2-ndk",
+        "android.hardware.biometrics.common-V2-ndk",
+        "android.hardware.keymaster-V3-ndk",
+        "android.hardware.biometrics.common.util",
+    ],
+    vendor: true,
     test_suites: ["general-tests"],
+    require_root: true,
+}
+
+sysprop_library {
+    name: "android.hardware.biometrics.fingerprint.VirtualProps",
+    srcs: ["fingerprint.sysprop"],
+    property_owner: "Vendor",
+    vendor: true,
 }
diff --git a/biometrics/fingerprint/aidl/default/FakeFingerprintEngine.cpp b/biometrics/fingerprint/aidl/default/FakeFingerprintEngine.cpp
new file mode 100644
index 0000000..138caa0
--- /dev/null
+++ b/biometrics/fingerprint/aidl/default/FakeFingerprintEngine.cpp
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "FakeFingerprintEngine.h"
+
+#include <android-base/logging.h>
+
+#include <fingerprint.sysprop.h>
+
+#include "util/CancellationSignal.h"
+#include "util/Util.h"
+
+using namespace ::android::fingerprint::virt;
+
+namespace aidl::android::hardware::biometrics::fingerprint {
+
+void FakeFingerprintEngine::generateChallengeImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+    std::uniform_int_distribution<int64_t> dist;
+    auto challenge = dist(mRandom);
+    FingerprintHalProperties::challenge(challenge);
+    cb->onChallengeGenerated(challenge);
+}
+
+void FakeFingerprintEngine::revokeChallengeImpl(ISessionCallback* cb, int64_t challenge) {
+    BEGIN_OP(0);
+    FingerprintHalProperties::challenge({});
+    cb->onChallengeRevoked(challenge);
+}
+
+void FakeFingerprintEngine::enrollImpl(ISessionCallback* cb,
+                                       const keymaster::HardwareAuthToken& hat,
+                                       const std::future<void>& cancel) {
+    BEGIN_OP(FingerprintHalProperties::operation_enroll_latency().value_or(DEFAULT_LATENCY));
+
+    // Do proper HAT verification in the real implementation.
+    if (hat.mac.empty()) {
+        LOG(ERROR) << "Fail: hat";
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
+        return;
+    }
+
+    if (FingerprintHalProperties::operation_enroll_fails().value_or(false)) {
+        LOG(ERROR) << "Fail: operation_enroll_fails";
+        cb->onError(Error::VENDOR, 0 /* vendorError */);
+        return;
+    }
+
+    // format is "<id>:<progress_ms>,<progress_ms>,...:<result>
+    auto nextEnroll = FingerprintHalProperties::next_enrollment().value_or("");
+    auto parts = Util::split(nextEnroll, ":");
+    if (parts.size() != 3) {
+        LOG(ERROR) << "Fail: invalid next_enrollment";
+        cb->onError(Error::VENDOR, 0 /* vendorError */);
+        return;
+    }
+    auto enrollmentId = std::stoi(parts[0]);
+    auto progress = Util::split(parts[1], ",");
+    for (size_t i = 0; i < progress.size(); i++) {
+        auto left = progress.size() - i - 1;
+        SLEEP_MS(std::stoi(progress[i]));
+
+        if (shouldCancel(cancel)) {
+            LOG(ERROR) << "Fail: cancel";
+            cb->onError(Error::CANCELED, 0 /* vendorCode */);
+            return;
+        }
+
+        cb->onAcquired(AcquiredInfo::GOOD, 0 /* vendorCode */);
+        if (left == 0 && !IS_TRUE(parts[2])) {  // end and failed
+            LOG(ERROR) << "Fail: requested by caller: " << nextEnroll;
+            FingerprintHalProperties::next_enrollment({});
+            cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorCode */);
+        } else {  // progress and update props if last time
+            if (left == 0) {
+                auto enrollments = FingerprintHalProperties::enrollments();
+                enrollments.emplace_back(enrollmentId);
+                FingerprintHalProperties::enrollments(enrollments);
+                FingerprintHalProperties::next_enrollment({});
+                LOG(INFO) << "Enrolled: " << enrollmentId;
+            }
+            cb->onEnrollmentProgress(enrollmentId, left);
+        }
+    }
+}
+
+void FakeFingerprintEngine::authenticateImpl(ISessionCallback* cb, int64_t /* operationId */,
+                                             const std::future<void>& cancel) {
+    BEGIN_OP(FingerprintHalProperties::operation_authenticate_latency().value_or(DEFAULT_LATENCY));
+
+    auto now = Util::getSystemNanoTime();
+    int64_t duration = FingerprintHalProperties::operation_authenticate_duration().value_or(0);
+    do {
+        if (FingerprintHalProperties::operation_authenticate_fails().value_or(false)) {
+            LOG(ERROR) << "Fail: operation_authenticate_fails";
+            cb->onError(Error::VENDOR, 0 /* vendorError */);
+            return;
+        }
+
+        if (FingerprintHalProperties::lockout().value_or(false)) {
+            LOG(ERROR) << "Fail: lockout";
+            cb->onLockoutPermanent();
+            cb->onError(Error::HW_UNAVAILABLE, 0 /* vendorError */);
+            return;
+        }
+
+        if (shouldCancel(cancel)) {
+            LOG(ERROR) << "Fail: cancel";
+            cb->onError(Error::CANCELED, 0 /* vendorCode */);
+            return;
+        }
+
+        auto id = FingerprintHalProperties::enrollment_hit().value_or(0);
+        auto enrolls = FingerprintHalProperties::enrollments();
+        auto isEnrolled = std::find(enrolls.begin(), enrolls.end(), id) != enrolls.end();
+        if (id > 0 && isEnrolled) {
+            cb->onAuthenticationSucceeded(id, {} /* hat */);
+            return;
+        }
+
+        SLEEP_MS(100);
+    } while (!Util::hasElapsed(now, duration));
+
+    LOG(ERROR) << "Fail: not enrolled";
+    cb->onAuthenticationFailed();
+    cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
+}
+
+void FakeFingerprintEngine::detectInteractionImpl(ISessionCallback* cb,
+                                                  const std::future<void>& cancel) {
+    BEGIN_OP(FingerprintHalProperties::operation_detect_interaction_latency().value_or(
+            DEFAULT_LATENCY));
+
+    if (FingerprintHalProperties::operation_detect_interaction_fails().value_or(false)) {
+        LOG(ERROR) << "Fail: operation_detect_interaction_fails";
+        cb->onError(Error::VENDOR, 0 /* vendorError */);
+        return;
+    }
+
+    if (shouldCancel(cancel)) {
+        LOG(ERROR) << "Fail: cancel";
+        cb->onError(Error::CANCELED, 0 /* vendorCode */);
+        return;
+    }
+
+    auto id = FingerprintHalProperties::enrollment_hit().value_or(0);
+    auto enrolls = FingerprintHalProperties::enrollments();
+    auto isEnrolled = std::find(enrolls.begin(), enrolls.end(), id) != enrolls.end();
+    if (id <= 0 || !isEnrolled) {
+        LOG(ERROR) << "Fail: not enrolled";
+        cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
+        return;
+    }
+
+    cb->onInteractionDetected();
+}
+
+void FakeFingerprintEngine::enumerateEnrollmentsImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+
+    std::vector<int32_t> ids;
+    for (auto& enrollment : FingerprintHalProperties::enrollments()) {
+        auto id = enrollment.value_or(0);
+        if (id > 0) {
+            ids.push_back(id);
+        }
+    }
+
+    cb->onEnrollmentsEnumerated(ids);
+}
+
+void FakeFingerprintEngine::removeEnrollmentsImpl(ISessionCallback* cb,
+                                                  const std::vector<int32_t>& enrollmentIds) {
+    BEGIN_OP(0);
+
+    std::vector<std::optional<int32_t>> newEnrollments;
+    std::vector<int32_t> removed;
+    for (auto& enrollment : FingerprintHalProperties::enrollments()) {
+        auto id = enrollment.value_or(0);
+        if (std::find(enrollmentIds.begin(), enrollmentIds.end(), id) != enrollmentIds.end()) {
+            removed.push_back(id);
+        } else if (id > 0) {
+            newEnrollments.emplace_back(id);
+        }
+    }
+    FingerprintHalProperties::enrollments(newEnrollments);
+
+    cb->onEnrollmentsRemoved(enrollmentIds);
+}
+
+void FakeFingerprintEngine::getAuthenticatorIdImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+    cb->onAuthenticatorIdRetrieved(FingerprintHalProperties::authenticator_id().value_or(0));
+}
+
+void FakeFingerprintEngine::invalidateAuthenticatorIdImpl(ISessionCallback* cb) {
+    BEGIN_OP(0);
+    auto id = FingerprintHalProperties::authenticator_id().value_or(0);
+    auto newId = id + 1;
+    FingerprintHalProperties::authenticator_id(newId);
+    cb->onAuthenticatorIdInvalidated(newId);
+}
+
+void FakeFingerprintEngine::resetLockoutImpl(ISessionCallback* cb,
+                                             const keymaster::HardwareAuthToken& /*hat*/) {
+    BEGIN_OP(0);
+    FingerprintHalProperties::lockout(false);
+    cb->onLockoutCleared();
+}
+
+}  // namespace aidl::android::hardware::biometrics::fingerprint
diff --git a/biometrics/fingerprint/aidl/default/Fingerprint.cpp b/biometrics/fingerprint/aidl/default/Fingerprint.cpp
index 1f14de6..71dc660 100644
--- a/biometrics/fingerprint/aidl/default/Fingerprint.cpp
+++ b/biometrics/fingerprint/aidl/default/Fingerprint.cpp
@@ -16,15 +16,19 @@
 
 #include "Fingerprint.h"
 
+#include <fingerprint.sysprop.h>
 #include "Session.h"
 
+#include <android-base/logging.h>
+
+using namespace ::android::fingerprint::virt;
+
 namespace aidl::android::hardware::biometrics::fingerprint {
 namespace {
 constexpr size_t MAX_WORKER_QUEUE_SIZE = 5;
 constexpr int SENSOR_ID = 1;
 constexpr common::SensorStrength SENSOR_STRENGTH = common::SensorStrength::STRONG;
 constexpr int MAX_ENROLLMENTS_PER_USER = 5;
-constexpr FingerprintSensorType SENSOR_TYPE = FingerprintSensorType::REAR;
 constexpr bool SUPPORTS_NAVIGATION_GESTURES = true;
 constexpr char HW_COMPONENT_ID[] = "fingerprintSensor";
 constexpr char HW_VERSION[] = "vendor/model/revision";
@@ -51,8 +55,18 @@
                                      0 /* sensorLocationY */, 0 /* sensorRadius */,
                                      "" /* display */};
 
+    FingerprintSensorType sensorType = FingerprintSensorType::UNKNOWN;
+    std::string sensorTypeProp = FingerprintHalProperties::type().value_or("");
+    if (sensorTypeProp == "" || sensorTypeProp == "default" || sensorTypeProp == "rear") {
+        sensorType = FingerprintSensorType::REAR;
+    }
+    if (sensorType == FingerprintSensorType::UNKNOWN) {
+        UNIMPLEMENTED(FATAL) << "unrecognized or unimplemented fingerprint behavior: "
+                             << sensorTypeProp;
+    }
+
     *out = {{commonProps,
-             SENSOR_TYPE,
+             sensorType,
              {sensorLocation},
              SUPPORTS_NAVIGATION_GESTURES,
              false /* supportsDetectInteraction */}};
diff --git a/biometrics/fingerprint/aidl/default/README.md b/biometrics/fingerprint/aidl/default/README.md
new file mode 100644
index 0000000..a6e6b81
--- /dev/null
+++ b/biometrics/fingerprint/aidl/default/README.md
@@ -0,0 +1,88 @@
+# Virtual Fingerprint HAL
+
+This is a virtual HAL implementation that is backed by system properties instead
+of actual hardware. It's intended for testing and UI development on debuggable
+builds to allow devices to masquerade as alternative device types and for
+emulators.
+
+## Supported Devices
+
+This HAL can be used on emulators, like cuttlefish, or on real devices. Add the
+following to your device's `.mk` file to include it:
+
+```
+PRODUCT_PACKAGES_DEBUG += android.hardware.biometrics.fingerprint-service.example
+```
+
+The virtual HAL will be ignored if a real HAL is also installed on the target
+device. Set the `biometric_virtual_enabled` settings and reboot the device to
+switch to the virtual HAL. Unset it and reboot again to switch back.
+
+## Getting Started
+
+First, set the type of sensor the device should use, enable the virtual
+extensions in the framework, and reboot.
+
+This doesn't work with HIDL and you typically need to have a PIN or password set
+for things to work correctly, so this is a good time to set those too.
+
+```shell
+$ adb root
+$ adb shell settings put secure biometric_virtual_enabled 1
+$ adb shell setprop persist.vendor.fingerprint.virtual.type rear
+$ adb shell locksettings set-pin 0000
+$ adb shell settings put secure com.android.server.biometrics.AuthService.hidlDisabled 1
+$ adb reboot
+```
+
+### Enrollments
+
+Next, setup enrollments on the device. This can either be done through the UI,
+or via adb.
+
+#### UI Enrollment
+
+1. Tee up the results of the enrollment before starting the process:
+
+      ```shell
+      $ adb shell setprop vendor.fingerprint.virtual.next_enrollment 1:100,100,100:true
+      ```
+2. Navigate to `Settings -> Security -> Fingerprint Unlock` and follow the
+   prompts.
+3. Verify the enrollments in the UI:
+
+      ```shell
+      $ adb shell getprop persist.vendor.fingerprint.virtual.enrollments
+      ```
+
+#### Direct Enrollment
+
+To set enrollment directly without the UI:
+
+```shell
+$ adb root
+$ adb shell setprop persist.vendor.fingerprint.virtual.enrollments 1
+$ adb shell cmd fingerprint sync
+```
+
+**Note: You may need to do this twice.** The templates are checked as part of
+some lazy operations, like user switching and startup, which can cause the
+framework to delete the enrollments before the sync operation runs. Until this
+is fixed, just run the commands twice as a workaround.
+
+### Authenticate
+
+To authenticate successfully set the enrolled id that should succeed. Unset it
+or change the value to make authenticate operations fail:
+
+````shell
+$ adb shell setprop vendor.fingerprint.virtual.enrollment_hit 1
+````
+
+### View HAL State
+
+To view all the properties of the HAL (see `fingerprint.sysprop` for the API):
+
+```shell
+$ adb shell getprop | grep vendor.fingerprint.virtual
+```
diff --git a/biometrics/fingerprint/aidl/default/Session.cpp b/biometrics/fingerprint/aidl/default/Session.cpp
index 452ed12..ab91e98 100644
--- a/biometrics/fingerprint/aidl/default/Session.cpp
+++ b/biometrics/fingerprint/aidl/default/Session.cpp
@@ -18,7 +18,7 @@
 
 #include <android-base/logging.h>
 
-#include "CancellationSignal.h"
+#include "util/CancellationSignal.h"
 
 namespace aidl::android::hardware::biometrics::fingerprint {
 
@@ -101,7 +101,7 @@
         if (shouldCancel(cancFuture)) {
             mCb->onError(Error::CANCELED, 0 /* vendorCode */);
         } else {
-            mEngine->enrollImpl(mCb.get(), hat);
+            mEngine->enrollImpl(mCb.get(), hat, cancFuture);
         }
         enterIdling();
     }));
@@ -123,7 +123,7 @@
         if (shouldCancel(cancFuture)) {
             mCb->onError(Error::CANCELED, 0 /* vendorCode */);
         } else {
-            mEngine->authenticateImpl(mCb.get(), operationId);
+            mEngine->authenticateImpl(mCb.get(), operationId, cancFuture);
         }
         enterIdling();
     }));
@@ -144,7 +144,7 @@
         if (shouldCancel(cancFuture)) {
             mCb->onError(Error::CANCELED, 0 /* vendorCode */);
         } else {
-            mEngine->detectInteractionImpl(mCb.get());
+            mEngine->detectInteractionImpl(mCb.get(), cancFuture);
         }
         enterIdling();
     }));
diff --git a/biometrics/fingerprint/aidl/default/api/android.hardware.biometrics.fingerprint.VirtualProps-current.txt b/biometrics/fingerprint/aidl/default/api/android.hardware.biometrics.fingerprint.VirtualProps-current.txt
new file mode 100644
index 0000000..4724ff4
--- /dev/null
+++ b/biometrics/fingerprint/aidl/default/api/android.hardware.biometrics.fingerprint.VirtualProps-current.txt
@@ -0,0 +1,85 @@
+props {
+  owner: Vendor
+  module: "android.fingerprint.virt.FingerprintHalProperties"
+  prop {
+    api_name: "authenticator_id"
+    type: Long
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.authenticator_id"
+  }
+  prop {
+    api_name: "challenge"
+    type: Long
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.challenge"
+  }
+  prop {
+    api_name: "enrollment_hit"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.enrollment_hit"
+  }
+  prop {
+    api_name: "enrollments"
+    type: IntegerList
+    access: ReadWrite
+    prop_name: "persist.vendor.fingerprint.virtual.enrollments"
+  }
+  prop {
+    api_name: "lockout"
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.lockout"
+  }
+  prop {
+    api_name: "next_enrollment"
+    type: String
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.next_enrollment"
+  }
+  prop {
+    api_name: "operation_authenticate_duration"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.operation_authenticate_duration"
+  }
+  prop {
+    api_name: "operation_authenticate_fails"
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.operation_authenticate_fails"
+  }
+  prop {
+    api_name: "operation_authenticate_latency"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.operation_authenticate_latency"
+  }
+  prop {
+    api_name: "operation_detect_interaction_fails"
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.operation_detect_interaction_fails"
+  }
+  prop {
+    api_name: "operation_detect_interaction_latency"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.operation_detect_interaction_latency"
+  }
+  prop {
+    api_name: "operation_enroll_fails"
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.operation_enroll_fails"
+  }
+  prop {
+    api_name: "operation_enroll_latency"
+    type: Integer
+    access: ReadWrite
+    prop_name: "vendor.fingerprint.virtual.operation_enroll_latency"
+  }
+  prop {
+    api_name: "type"
+    type: String
+    access: ReadWrite
+    prop_name: "persist.vendor.fingerprint.virtual.type"
+    enum_values: "default|rear|udfps|side"
+  }
+}
diff --git a/biometrics/fingerprint/aidl/default/fingerprint-default.rc b/biometrics/fingerprint/aidl/default/fingerprint-default.rc
deleted file mode 100644
index eb62c56..0000000
--- a/biometrics/fingerprint/aidl/default/fingerprint-default.rc
+++ /dev/null
@@ -1,5 +0,0 @@
-service vendor.fingerprint-default /vendor/bin/hw/android.hardware.biometrics.fingerprint-service.example
-    class hal
-    user nobody
-    group nobody
-
diff --git a/biometrics/fingerprint/aidl/default/fingerprint-example.rc b/biometrics/fingerprint/aidl/default/fingerprint-example.rc
new file mode 100644
index 0000000..574438e
--- /dev/null
+++ b/biometrics/fingerprint/aidl/default/fingerprint-example.rc
@@ -0,0 +1,4 @@
+service vendor.fingerprint-example /vendor/bin/hw/android.hardware.biometrics.fingerprint-service.example
+    class hal
+    user nobody
+    group nobody
diff --git a/biometrics/fingerprint/aidl/default/fingerprint-default.xml b/biometrics/fingerprint/aidl/default/fingerprint-example.xml
similarity index 79%
rename from biometrics/fingerprint/aidl/default/fingerprint-default.xml
rename to biometrics/fingerprint/aidl/default/fingerprint-example.xml
index d322eb6..05d1279 100644
--- a/biometrics/fingerprint/aidl/default/fingerprint-default.xml
+++ b/biometrics/fingerprint/aidl/default/fingerprint-example.xml
@@ -2,6 +2,6 @@
     <hal format="aidl">
         <name>android.hardware.biometrics.fingerprint</name>
         <version>2</version>
-        <fqname>IFingerprint/default</fqname>
+        <fqname>IFingerprint/virtual</fqname>
     </hal>
 </manifest>
diff --git a/biometrics/fingerprint/aidl/default/fingerprint.sysprop b/biometrics/fingerprint/aidl/default/fingerprint.sysprop
new file mode 100644
index 0000000..12c8648
--- /dev/null
+++ b/biometrics/fingerprint/aidl/default/fingerprint.sysprop
@@ -0,0 +1,135 @@
+# fingerprint.sysprop
+# module becomes static class (Java) / namespace (C++) for serving API
+module: "android.fingerprint.virt.FingerprintHalProperties"
+owner: Vendor
+
+# type of fingerprint sensor
+prop {
+    prop_name: "persist.vendor.fingerprint.virtual.type"
+    type: String
+    scope: Public
+    access: ReadWrite
+    enum_values: "default|rear|udfps|side"
+    api_name: "type"
+}
+
+# ids of call current enrollments
+prop {
+    prop_name: "persist.vendor.fingerprint.virtual.enrollments"
+    type: IntegerList
+    scope: Public
+    access: ReadWrite
+    api_name: "enrollments"
+}
+
+# authenticate and detectInteraction will succeed with this
+# enrollment id, when present, otherwise they will error
+prop {
+    prop_name: "vendor.fingerprint.virtual.enrollment_hit"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "enrollment_hit"
+}
+
+# the next enrollment in the format: "<id>:<delay>,<delay>,...:<result>"
+# for example: "2:0:true"
+# this property is reset after enroll completes
+prop {
+    prop_name: "vendor.fingerprint.virtual.next_enrollment"
+    type: String
+    scope: Public
+    access: ReadWrite
+    api_name: "next_enrollment"
+}
+
+# value for getAuthenticatorId or 0
+prop {
+    prop_name: "vendor.fingerprint.virtual.authenticator_id"
+    type: Long
+    scope: Public
+    access: ReadWrite
+    api_name: "authenticator_id"
+}
+
+# value for generateChallenge
+prop {
+    prop_name: "vendor.fingerprint.virtual.challenge"
+    type: Long
+    scope: Public
+    access: ReadWrite
+    api_name: "challenge"
+}
+
+# if locked out
+prop {
+    prop_name: "vendor.fingerprint.virtual.lockout"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "lockout"
+}
+
+# force all authenticate operations to fail
+prop {
+    prop_name: "vendor.fingerprint.virtual.operation_authenticate_fails"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_authenticate_fails"
+}
+
+# force all detectInteraction operations to fail
+prop {
+    prop_name: "vendor.fingerprint.virtual.operation_detect_interaction_fails"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_detect_interaction_fails"
+}
+
+# force all enroll operations to fail
+prop {
+    prop_name: "vendor.fingerprint.virtual.operation_enroll_fails"
+    type: Boolean
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_enroll_fails"
+}
+
+# add a latency to authentication operations
+prop {
+    prop_name: "vendor.fingerprint.virtual.operation_authenticate_latency"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_authenticate_latency"
+}
+
+# add a latency to detectInteraction operations
+prop {
+    prop_name: "vendor.fingerprint.virtual.operation_detect_interaction_latency"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_detect_interaction_latency"
+}
+
+# add a latency to enroll operations
+prop {
+    prop_name: "vendor.fingerprint.virtual.operation_enroll_latency"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_enroll_latency"
+}
+
+# millisecond duration for authenticate operations
+# (waits for changes to enrollment_hit)
+prop {
+    prop_name: "vendor.fingerprint.virtual.operation_authenticate_duration"
+    type: Integer
+    scope: Public
+    access: ReadWrite
+    api_name: "operation_authenticate_duration"
+}
diff --git a/biometrics/fingerprint/aidl/default/include/FakeFingerprintEngine.h b/biometrics/fingerprint/aidl/default/include/FakeFingerprintEngine.h
index b927770..eb810da 100644
--- a/biometrics/fingerprint/aidl/default/include/FakeFingerprintEngine.h
+++ b/biometrics/fingerprint/aidl/default/include/FakeFingerprintEngine.h
@@ -15,72 +15,35 @@
  */
 
 #pragma once
+#include <aidl/android/hardware/biometrics/common/SensorStrength.h>
+#include <aidl/android/hardware/biometrics/fingerprint/ISessionCallback.h>
 
-#include <android-base/logging.h>
 #include <random>
 
+#include <future>
+#include <vector>
+
+using namespace ::aidl::android::hardware::biometrics::common;
+
 namespace aidl::android::hardware::biometrics::fingerprint {
 
+// A fake engine that is backed by system properties instead of hardware.
 class FakeFingerprintEngine {
   public:
     FakeFingerprintEngine() : mRandom(std::mt19937::default_seed) {}
 
-    void generateChallengeImpl(ISessionCallback* cb) {
-        LOG(INFO) << "generateChallengeImpl";
-        std::uniform_int_distribution<int64_t> dist;
-        auto challenge = dist(mRandom);
-        cb->onChallengeGenerated(challenge);
-    }
-
-    void revokeChallengeImpl(ISessionCallback* cb, int64_t challenge) {
-        LOG(INFO) << "revokeChallengeImpl";
-        cb->onChallengeRevoked(challenge);
-    }
-
-    void enrollImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& hat) {
-        LOG(INFO) << "enrollImpl";
-        // Do proper HAT verification in the real implementation.
-        if (hat.mac.empty()) {
-            cb->onError(Error::UNABLE_TO_PROCESS, 0 /* vendorError */);
-            return;
-        }
-        cb->onEnrollmentProgress(0 /* enrollmentId */, 0 /* remaining */);
-    }
-
-    void authenticateImpl(ISessionCallback* cb, int64_t /* operationId */) {
-        LOG(INFO) << "authenticateImpl";
-        cb->onAuthenticationSucceeded(0 /* enrollmentId */, {} /* hat */);
-    }
-
-    void detectInteractionImpl(ISessionCallback* cb) {
-        LOG(INFO) << "detectInteractionImpl";
-        cb->onInteractionDetected();
-    }
-
-    void enumerateEnrollmentsImpl(ISessionCallback* cb) {
-        LOG(INFO) << "enumerateEnrollmentsImpl";
-        cb->onEnrollmentsEnumerated({} /* enrollmentIds */);
-    }
-
-    void removeEnrollmentsImpl(ISessionCallback* cb, const std::vector<int32_t>& enrollmentIds) {
-        LOG(INFO) << "removeEnrollmentsImpl";
-        cb->onEnrollmentsRemoved(enrollmentIds);
-    }
-
-    void getAuthenticatorIdImpl(ISessionCallback* cb) {
-        LOG(INFO) << "getAuthenticatorIdImpl";
-        cb->onAuthenticatorIdRetrieved(0 /* authenticatorId */);
-    }
-
-    void invalidateAuthenticatorIdImpl(ISessionCallback* cb) {
-        LOG(INFO) << "invalidateAuthenticatorIdImpl";
-        cb->onAuthenticatorIdInvalidated(0 /* newAuthenticatorId */);
-    }
-
-    void resetLockoutImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& /*hat*/) {
-        LOG(INFO) << "resetLockoutImpl";
-        cb->onLockoutCleared();
-    }
+    void generateChallengeImpl(ISessionCallback* cb);
+    void revokeChallengeImpl(ISessionCallback* cb, int64_t challenge);
+    void enrollImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& hat,
+                    const std::future<void>& cancel);
+    void authenticateImpl(ISessionCallback* cb, int64_t operationId,
+                          const std::future<void>& cancel);
+    void detectInteractionImpl(ISessionCallback* cb, const std::future<void>& cancel);
+    void enumerateEnrollmentsImpl(ISessionCallback* cb);
+    void removeEnrollmentsImpl(ISessionCallback* cb, const std::vector<int32_t>& enrollmentIds);
+    void getAuthenticatorIdImpl(ISessionCallback* cb);
+    void invalidateAuthenticatorIdImpl(ISessionCallback* cb);
+    void resetLockoutImpl(ISessionCallback* cb, const keymaster::HardwareAuthToken& /*hat*/);
 
     std::mt19937 mRandom;
 };
diff --git a/biometrics/fingerprint/aidl/default/include/Fingerprint.h b/biometrics/fingerprint/aidl/default/include/Fingerprint.h
index 7bd3d6d..20def0c 100644
--- a/biometrics/fingerprint/aidl/default/include/Fingerprint.h
+++ b/biometrics/fingerprint/aidl/default/include/Fingerprint.h
@@ -20,7 +20,7 @@
 
 #include "FakeFingerprintEngine.h"
 #include "Session.h"
-#include "WorkerThread.h"
+#include "thread/WorkerThread.h"
 
 namespace aidl::android::hardware::biometrics::fingerprint {
 
diff --git a/biometrics/fingerprint/aidl/default/include/Session.h b/biometrics/fingerprint/aidl/default/include/Session.h
index acd5def..104d819 100644
--- a/biometrics/fingerprint/aidl/default/include/Session.h
+++ b/biometrics/fingerprint/aidl/default/include/Session.h
@@ -20,7 +20,7 @@
 #include <aidl/android/hardware/biometrics/fingerprint/ISessionCallback.h>
 
 #include "FakeFingerprintEngine.h"
-#include "WorkerThread.h"
+#include "thread/WorkerThread.h"
 
 namespace aidl::android::hardware::biometrics::fingerprint {
 
diff --git a/biometrics/fingerprint/aidl/default/main.cpp b/biometrics/fingerprint/aidl/default/main.cpp
index c985201..0e672b1 100644
--- a/biometrics/fingerprint/aidl/default/main.cpp
+++ b/biometrics/fingerprint/aidl/default/main.cpp
@@ -27,7 +27,7 @@
     ABinderProcess_setThreadPoolMaxThreadCount(0);
     std::shared_ptr<Fingerprint> hal = ndk::SharedRefBase::make<Fingerprint>();
 
-    const std::string instance = std::string(Fingerprint::descriptor) + "/default";
+    const std::string instance = std::string(Fingerprint::descriptor) + "/virtual";
     binder_status_t status = AServiceManager_addService(hal->asBinder().get(), instance.c_str());
     CHECK_EQ(status, STATUS_OK);
 
diff --git a/biometrics/fingerprint/aidl/default/tests/FakeFingerprintEngineTest.cpp b/biometrics/fingerprint/aidl/default/tests/FakeFingerprintEngineTest.cpp
new file mode 100644
index 0000000..742d933
--- /dev/null
+++ b/biometrics/fingerprint/aidl/default/tests/FakeFingerprintEngineTest.cpp
@@ -0,0 +1,297 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <android/binder_process.h>
+#include <fingerprint.sysprop.h>
+#include <gtest/gtest.h>
+
+#include <aidl/android/hardware/biometrics/fingerprint/BnSessionCallback.h>
+
+#include "FakeFingerprintEngine.h"
+
+using namespace ::android::fingerprint::virt;
+using namespace ::aidl::android::hardware::biometrics::fingerprint;
+using namespace ::aidl::android::hardware::keymaster;
+
+namespace aidl::android::hardware::biometrics::fingerprint {
+
+class TestSessionCallback : public BnSessionCallback {
+  public:
+    ndk::ScopedAStatus onChallengeGenerated(int64_t challenge) override {
+        mLastChallenge = challenge;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onChallengeRevoked(int64_t challenge) override {
+        mLastChallengeRevoked = challenge;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onError(fingerprint::Error error, int32_t) override {
+        mError = error;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onEnrollmentProgress(int32_t enrollmentId, int32_t remaining) override {
+        if (remaining == 0) mLastEnrolled = enrollmentId;
+        return ndk::ScopedAStatus::ok();
+    };
+
+    ::ndk::ScopedAStatus onAuthenticationSucceeded(int32_t enrollmentId,
+                                                   const keymaster::HardwareAuthToken&) override {
+        mLastAuthenticated = enrollmentId;
+        mAuthenticateFailed = false;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onAuthenticationFailed() override {
+        mLastAuthenticated = 0;
+        mAuthenticateFailed = true;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onInteractionDetected() override {
+        mInteractionDetectedCount++;
+        return ndk::ScopedAStatus::ok();
+    };
+    ndk::ScopedAStatus onAcquired(AcquiredInfo /*info*/, int32_t /*vendorCode*/) override {
+        return ndk::ScopedAStatus::ok();
+    }
+    ::ndk::ScopedAStatus onEnrollmentsEnumerated(
+            const std::vector<int32_t>& enrollmentIds) override {
+        mLastEnrollmentEnumerated = enrollmentIds;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onEnrollmentsRemoved(const std::vector<int32_t>& enrollmentIds) override {
+        mLastEnrollmentRemoved = enrollmentIds;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onAuthenticatorIdRetrieved(int64_t authenticatorId) override {
+        mLastAuthenticatorId = authenticatorId;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onAuthenticatorIdInvalidated(int64_t authenticatorId) override {
+        mLastAuthenticatorId = authenticatorId;
+        mAuthenticatorIdInvalidated = true;
+        return ndk::ScopedAStatus::ok();
+    };
+    ::ndk::ScopedAStatus onLockoutPermanent() override {
+        mLockoutPermanent = true;
+        return ndk::ScopedAStatus::ok();
+    };
+    ndk::ScopedAStatus onLockoutTimed(int64_t /* timeout */) override {
+        return ndk::ScopedAStatus::ok();
+    }
+    ndk::ScopedAStatus onLockoutCleared() override { return ndk::ScopedAStatus::ok(); }
+    ndk::ScopedAStatus onSessionClosed() override { return ndk::ScopedAStatus::ok(); }
+
+    Error mError = Error::UNKNOWN;
+    int64_t mLastChallenge = -1;
+    int64_t mLastChallengeRevoked = -1;
+    int32_t mLastEnrolled = -1;
+    int32_t mLastAuthenticated = -1;
+    int64_t mLastAuthenticatorId = -1;
+    std::vector<int32_t> mLastEnrollmentEnumerated;
+    std::vector<int32_t> mLastEnrollmentRemoved;
+    bool mAuthenticateFailed = false;
+    bool mAuthenticatorIdInvalidated = false;
+    bool mLockoutPermanent = false;
+    int mInteractionDetectedCount = 0;
+};
+
+class FakeFingerprintEngineTest : public ::testing::Test {
+  protected:
+    void SetUp() override {
+        FingerprintHalProperties::operation_enroll_latency(0);
+        FingerprintHalProperties::operation_authenticate_latency(0);
+        FingerprintHalProperties::operation_detect_interaction_latency(0);
+        mCallback = ndk::SharedRefBase::make<TestSessionCallback>();
+    }
+
+    FakeFingerprintEngine mEngine;
+    std::shared_ptr<TestSessionCallback> mCallback;
+    std::promise<void> mCancel;
+};
+
+TEST_F(FakeFingerprintEngineTest, GenerateChallenge) {
+    mEngine.generateChallengeImpl(mCallback.get());
+    ASSERT_EQ(FingerprintHalProperties::challenge().value(), mCallback->mLastChallenge);
+}
+
+TEST_F(FakeFingerprintEngineTest, RevokeChallenge) {
+    auto challenge = FingerprintHalProperties::challenge().value_or(10);
+    mEngine.revokeChallengeImpl(mCallback.get(), challenge);
+    ASSERT_FALSE(FingerprintHalProperties::challenge().has_value());
+    ASSERT_EQ(challenge, mCallback->mLastChallengeRevoked);
+}
+
+TEST_F(FakeFingerprintEngineTest, ResetLockout) {
+    FingerprintHalProperties::lockout(true);
+    mEngine.resetLockoutImpl(mCallback.get(), {});
+    ASSERT_FALSE(FingerprintHalProperties::lockout().value_or(true));
+}
+
+TEST_F(FakeFingerprintEngineTest, AuthenticatorId) {
+    FingerprintHalProperties::authenticator_id(50);
+    mEngine.getAuthenticatorIdImpl(mCallback.get());
+    ASSERT_EQ(50, mCallback->mLastAuthenticatorId);
+    ASSERT_FALSE(mCallback->mAuthenticatorIdInvalidated);
+}
+
+TEST_F(FakeFingerprintEngineTest, AuthenticatorIdInvalidate) {
+    FingerprintHalProperties::authenticator_id(500);
+    mEngine.invalidateAuthenticatorIdImpl(mCallback.get());
+    ASSERT_NE(500, FingerprintHalProperties::authenticator_id().value());
+    ASSERT_TRUE(mCallback->mAuthenticatorIdInvalidated);
+}
+
+TEST_F(FakeFingerprintEngineTest, Enroll) {
+    FingerprintHalProperties::enrollments({});
+    FingerprintHalProperties::next_enrollment("4:0,0:true");
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.enrollImpl(mCallback.get(), hat, mCancel.get_future());
+    ASSERT_FALSE(FingerprintHalProperties::next_enrollment().has_value());
+    ASSERT_EQ(1, FingerprintHalProperties::enrollments().size());
+    ASSERT_EQ(4, FingerprintHalProperties::enrollments()[0].value());
+    ASSERT_EQ(4, mCallback->mLastEnrolled);
+}
+
+TEST_F(FakeFingerprintEngineTest, EnrollCancel) {
+    FingerprintHalProperties::enrollments({});
+    auto next = "4:0,0:true";
+    FingerprintHalProperties::next_enrollment(next);
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mCancel.set_value();
+    mEngine.enrollImpl(mCallback.get(), hat, mCancel.get_future());
+    ASSERT_EQ(Error::CANCELED, mCallback->mError);
+    ASSERT_EQ(-1, mCallback->mLastEnrolled);
+    ASSERT_EQ(0, FingerprintHalProperties::enrollments().size());
+    ASSERT_EQ(next, FingerprintHalProperties::next_enrollment().value_or(""));
+}
+
+TEST_F(FakeFingerprintEngineTest, EnrollFail) {
+    FingerprintHalProperties::enrollments({});
+    auto next = "2:0,0:false";
+    FingerprintHalProperties::next_enrollment(next);
+    keymaster::HardwareAuthToken hat{.mac = {2, 4}};
+    mEngine.enrollImpl(mCallback.get(), hat, mCancel.get_future());
+    ASSERT_EQ(Error::UNABLE_TO_PROCESS, mCallback->mError);
+    ASSERT_EQ(-1, mCallback->mLastEnrolled);
+    ASSERT_EQ(0, FingerprintHalProperties::enrollments().size());
+    ASSERT_FALSE(FingerprintHalProperties::next_enrollment().has_value());
+}
+
+TEST_F(FakeFingerprintEngineTest, Authenticate) {
+    FingerprintHalProperties::enrollments({1, 2});
+    FingerprintHalProperties::enrollment_hit(2);
+    mEngine.authenticateImpl(mCallback.get(), 0, mCancel.get_future());
+    ASSERT_FALSE(mCallback->mAuthenticateFailed);
+    ASSERT_EQ(2, mCallback->mLastAuthenticated);
+}
+
+TEST_F(FakeFingerprintEngineTest, AuthenticateCancel) {
+    FingerprintHalProperties::enrollments({2});
+    FingerprintHalProperties::enrollment_hit(2);
+    mCancel.set_value();
+    mEngine.authenticateImpl(mCallback.get(), 0, mCancel.get_future());
+    ASSERT_EQ(Error::CANCELED, mCallback->mError);
+    ASSERT_EQ(-1, mCallback->mLastAuthenticated);
+}
+
+TEST_F(FakeFingerprintEngineTest, AuthenticateNotSet) {
+    FingerprintHalProperties::enrollments({1, 2});
+    FingerprintHalProperties::enrollment_hit({});
+    mEngine.authenticateImpl(mCallback.get(), 0, mCancel.get_future());
+    ASSERT_TRUE(mCallback->mAuthenticateFailed);
+    ASSERT_EQ(mCallback->mError, Error::UNABLE_TO_PROCESS);
+}
+
+TEST_F(FakeFingerprintEngineTest, AuthenticateNotEnrolled) {
+    FingerprintHalProperties::enrollments({1, 2});
+    FingerprintHalProperties::enrollment_hit(3);
+    mEngine.authenticateImpl(mCallback.get(), 0, mCancel.get_future());
+    ASSERT_TRUE(mCallback->mAuthenticateFailed);
+    ASSERT_EQ(mCallback->mError, Error::UNABLE_TO_PROCESS);
+}
+
+TEST_F(FakeFingerprintEngineTest, AuthenticateLockout) {
+    FingerprintHalProperties::enrollments({22, 2});
+    FingerprintHalProperties::enrollment_hit(2);
+    FingerprintHalProperties::lockout(true);
+    mEngine.authenticateImpl(mCallback.get(), 0, mCancel.get_future());
+    ASSERT_TRUE(mCallback->mLockoutPermanent);
+    ASSERT_NE(mCallback->mError, Error::UNKNOWN);
+}
+
+TEST_F(FakeFingerprintEngineTest, InteractionDetect) {
+    FingerprintHalProperties::enrollments({1, 2});
+    FingerprintHalProperties::enrollment_hit(2);
+    mEngine.detectInteractionImpl(mCallback.get(), mCancel.get_future());
+    ASSERT_EQ(1, mCallback->mInteractionDetectedCount);
+}
+
+TEST_F(FakeFingerprintEngineTest, InteractionDetectCancel) {
+    FingerprintHalProperties::enrollments({1, 2});
+    FingerprintHalProperties::enrollment_hit(2);
+    mCancel.set_value();
+    mEngine.detectInteractionImpl(mCallback.get(), mCancel.get_future());
+    ASSERT_EQ(Error::CANCELED, mCallback->mError);
+    ASSERT_EQ(0, mCallback->mInteractionDetectedCount);
+}
+
+TEST_F(FakeFingerprintEngineTest, InteractionDetectNotSet) {
+    FingerprintHalProperties::enrollments({1, 2});
+    FingerprintHalProperties::enrollment_hit({});
+    mEngine.detectInteractionImpl(mCallback.get(), mCancel.get_future());
+    ASSERT_EQ(0, mCallback->mInteractionDetectedCount);
+}
+
+TEST_F(FakeFingerprintEngineTest, InteractionDetectNotEnrolled) {
+    FingerprintHalProperties::enrollments({1, 2});
+    FingerprintHalProperties::enrollment_hit(25);
+    mEngine.detectInteractionImpl(mCallback.get(), mCancel.get_future());
+    ASSERT_EQ(0, mCallback->mInteractionDetectedCount);
+}
+
+TEST_F(FakeFingerprintEngineTest, EnumerateEnrolled) {
+    FingerprintHalProperties::enrollments({2, 4, 8});
+    mEngine.enumerateEnrollmentsImpl(mCallback.get());
+    ASSERT_EQ(3, mCallback->mLastEnrollmentEnumerated.size());
+    for (auto id : FingerprintHalProperties::enrollments()) {
+        ASSERT_TRUE(std::find(mCallback->mLastEnrollmentEnumerated.begin(),
+                              mCallback->mLastEnrollmentEnumerated.end(),
+                              id) != mCallback->mLastEnrollmentEnumerated.end());
+    }
+}
+
+TEST_F(FakeFingerprintEngineTest, RemoveEnrolled) {
+    FingerprintHalProperties::enrollments({2, 4, 8, 1});
+    mEngine.removeEnrollmentsImpl(mCallback.get(), {2, 8});
+    auto enrolls = FingerprintHalProperties::enrollments();
+    ASSERT_EQ(2, mCallback->mLastEnrollmentRemoved.size());
+    for (auto id : {2, 8}) {
+        ASSERT_TRUE(std::find(mCallback->mLastEnrollmentRemoved.begin(),
+                              mCallback->mLastEnrollmentRemoved.end(),
+                              id) != mCallback->mLastEnrollmentRemoved.end());
+    }
+    ASSERT_EQ(2, enrolls.size());
+    for (auto id : {1, 4}) {
+        ASSERT_TRUE(std::find(enrolls.begin(), enrolls.end(), id) != enrolls.end());
+    }
+}
+
+}  // namespace aidl::android::hardware::biometrics::fingerprint
+
+int main(int argc, char** argv) {
+    testing::InitGoogleTest(&argc, argv);
+    ABinderProcess_startThreadPool();
+    return RUN_ALL_TESTS();
+}
diff --git a/biometrics/fingerprint/aidl/vts/Android.bp b/biometrics/fingerprint/aidl/vts/Android.bp
index 30d5624..a474f66 100644
--- a/biometrics/fingerprint/aidl/vts/Android.bp
+++ b/biometrics/fingerprint/aidl/vts/Android.bp
@@ -15,8 +15,8 @@
     ],
     srcs: ["VtsHalBiometricsFingerprintTargetTest.cpp"],
     static_libs: [
-        "android.hardware.biometrics.common-V1-ndk",
-        "android.hardware.biometrics.fingerprint-V1-ndk",
+        "android.hardware.biometrics.common-V2-ndk",
+        "android.hardware.biometrics.fingerprint-V2-ndk",
         "android.hardware.keymaster-V3-ndk",
     ],
     shared_libs: [
diff --git a/bluetooth/1.0/default/test/fuzzer/bluetoothV1.0_fuzzer.cpp b/bluetooth/1.0/default/test/fuzzer/bluetoothV1.0_fuzzer.cpp
index 90cdc66..fb8df99 100644
--- a/bluetooth/1.0/default/test/fuzzer/bluetoothV1.0_fuzzer.cpp
+++ b/bluetooth/1.0/default/test/fuzzer/bluetoothV1.0_fuzzer.cpp
@@ -88,11 +88,18 @@
     }
     mBtHci->close();
     mBtHci.clear();
+    for (size_t i = 0; i < mFdCount; ++i) {
+      if (mFdList[i]) {
+        close(mFdList[i]);
+      }
+    }
   }
   bool init(const uint8_t* data, size_t size);
   void process();
 
  private:
+  size_t mFdCount = 1;
+  int32_t mFdList[CH_MAX] = {0};
   sp<BluetoothHci> mBtHci = nullptr;
   FuzzedDataProvider* mFdp = nullptr;
 };
@@ -143,17 +150,15 @@
   bool shouldSetH4Protocol = mFdp->ConsumeBool();
   BtVendor* btVendor = BtVendor::getInstance();
 
-  size_t fdcount = 1;
-  int32_t fdList[CH_MAX] = {0};
   if (!shouldSetH4Protocol) {
-    fdcount = mFdp->ConsumeIntegralInRange<size_t>(kMinFdcount, CH_MAX - 1);
+    mFdCount = mFdp->ConsumeIntegralInRange<size_t>(kMinFdcount, CH_MAX - 1);
   }
 
-  for (size_t i = 0; i < fdcount; ++i) {
-    fdList[i] = open("/dev/null", O_RDWR | O_CREAT);
+  for (size_t i = 0; i < mFdCount; ++i) {
+    mFdList[i] = open("/dev/null", O_RDWR | O_CREAT);
   }
 
-  btVendor->populateFdList(fdList, fdcount);
+  btVendor->populateFdList(mFdList, mFdCount);
   mBtHci->initialize(bluetoothCallback);
 
   if (!bluetoothCallback->isInitialized) {
@@ -181,12 +186,6 @@
   }
 
   btVendor->callRemainingCbacks();
-
-  for (size_t i = 0; i < fdcount; ++i) {
-    if (fdList[i]) {
-      close(fdList[i]);
-    }
-  }
 }
 
 extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
diff --git a/bluetooth/1.1/vts/functional/VtsHalBluetoothV1_1TargetTest.xml b/bluetooth/1.1/vts/functional/VtsHalBluetoothV1_1TargetTest.xml
index d64751a..98b62ef 100644
--- a/bluetooth/1.1/vts/functional/VtsHalBluetoothV1_1TargetTest.xml
+++ b/bluetooth/1.1/vts/functional/VtsHalBluetoothV1_1TargetTest.xml
@@ -20,8 +20,11 @@
     <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
     </target_preparer>
 
-    <target_preparer class="com.android.tradefed.targetprep.DeviceSetup">
-        <option name="bluetooth" value="off" />
+    <target_preparer class="com.android.tradefed.targetprep.RunCommandTargetPreparer">
+        <option name="run-command" value="settings put global ble_scan_always_enabled 0" />
+        <option name="run-command" value="su u$(am get-current-user)_system svc bluetooth disable" />
+        <option name="teardown-command" value="su u$(am get-current-user)_system svc bluetooth enable" />
+        <option name="teardown-command" value="settings put global ble_scan_always_enabled 1" />
     </target_preparer>
 
     <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
diff --git a/bluetooth/audio/aidl/Android.bp b/bluetooth/audio/aidl/Android.bp
index c581702..a687162 100644
--- a/bluetooth/audio/aidl/Android.bp
+++ b/bluetooth/audio/aidl/Android.bp
@@ -40,9 +40,6 @@
             enabled: false,
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
             apex_available: [
                 "//apex_available:platform",
                 "com.android.bluetooth",
diff --git a/bluetooth/audio/aidl/default/LeAudioOffloadAudioProvider.cpp b/bluetooth/audio/aidl/default/LeAudioOffloadAudioProvider.cpp
index 0e22e44..7f610ef 100644
--- a/bluetooth/audio/aidl/default/LeAudioOffloadAudioProvider.cpp
+++ b/bluetooth/audio/aidl/default/LeAudioOffloadAudioProvider.cpp
@@ -55,21 +55,20 @@
     const std::shared_ptr<IBluetoothAudioPort>& host_if,
     const AudioConfiguration& audio_config,
     const std::vector<LatencyMode>& latency_modes, DataMQDesc* _aidl_return) {
-  if (audio_config.getTag() != AudioConfiguration::leAudioConfig) {
+  if (session_type_ ==
+      SessionType::LE_AUDIO_BROADCAST_HARDWARE_OFFLOAD_ENCODING_DATAPATH) {
+    if (audio_config.getTag() != AudioConfiguration::leAudioBroadcastConfig) {
+      LOG(WARNING) << __func__ << " - Invalid Audio Configuration="
+                   << audio_config.toString();
+      *_aidl_return = DataMQDesc();
+      return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
+    }
+  } else if (audio_config.getTag() != AudioConfiguration::leAudioConfig) {
     LOG(WARNING) << __func__ << " - Invalid Audio Configuration="
                  << audio_config.toString();
     *_aidl_return = DataMQDesc();
     return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
   }
-  const auto& le_audio_config =
-      audio_config.get<AudioConfiguration::leAudioConfig>();
-  if (!BluetoothAudioCodecs::IsOffloadLeAudioConfigurationValid(
-          session_type_, le_audio_config)) {
-    LOG(WARNING) << __func__ << " - Unsupported LC3 Offloaded Configuration="
-                 << le_audio_config.toString();
-    *_aidl_return = DataMQDesc();
-    return ndk::ScopedAStatus::fromExceptionCode(EX_ILLEGAL_ARGUMENT);
-  }
 
   return BluetoothAudioProvider::startSession(
       host_if, audio_config, latency_modes, _aidl_return);
diff --git a/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.cpp b/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.cpp
index b858f50..d5e85b8 100644
--- a/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.cpp
+++ b/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.cpp
@@ -321,19 +321,6 @@
   return false;
 }
 
-bool BluetoothAudioCodecs::IsOffloadLeAudioConfigurationValid(
-    const SessionType& session_type, const LeAudioConfiguration&) {
-  if (session_type !=
-          SessionType::LE_AUDIO_HARDWARE_OFFLOAD_ENCODING_DATAPATH &&
-      session_type !=
-          SessionType::LE_AUDIO_HARDWARE_OFFLOAD_DECODING_DATAPATH &&
-      session_type !=
-          SessionType::LE_AUDIO_BROADCAST_HARDWARE_OFFLOAD_ENCODING_DATAPATH) {
-    return false;
-  }
-  return true;
-}
-
 std::vector<PcmCapabilities>
 BluetoothAudioCodecs::GetSoftwarePcmCapabilities() {
   return {kDefaultSoftwarePcmCapabilities};
diff --git a/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.h b/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.h
index ed0598b..e3d657b 100644
--- a/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.h
+++ b/bluetooth/audio/utils/aidl_session/BluetoothAudioCodecs.h
@@ -44,9 +44,6 @@
   static bool IsOffloadCodecConfigurationValid(
       const SessionType& session_type, const CodecConfiguration& codec_config);
 
-  static bool IsOffloadLeAudioConfigurationValid(
-      const SessionType& session_type, const LeAudioConfiguration&);
-
   static std::vector<LeAudioCodecCapabilitiesSetting>
   GetLeAudioOffloadCodecCapabilities(const SessionType& session_type);
 
diff --git a/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp b/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp
index 3214bf2..292d352 100644
--- a/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp
+++ b/bluetooth/audio/utils/aidl_session/BluetoothAudioSession.cpp
@@ -111,7 +111,9 @@
   if (session_type_ !=
           SessionType::LE_AUDIO_HARDWARE_OFFLOAD_ENCODING_DATAPATH &&
       session_type_ !=
-          SessionType::LE_AUDIO_HARDWARE_OFFLOAD_DECODING_DATAPATH) {
+          SessionType::LE_AUDIO_HARDWARE_OFFLOAD_DECODING_DATAPATH &&
+      session_type_ !=
+          SessionType::LE_AUDIO_BROADCAST_HARDWARE_OFFLOAD_ENCODING_DATAPATH) {
     return;
   }
   std::lock_guard<std::recursive_mutex> guard(mutex_);
@@ -274,11 +276,14 @@
   bool is_offload_a2dp_session =
       (session_type_ == SessionType::A2DP_HARDWARE_OFFLOAD_ENCODING_DATAPATH ||
        session_type_ == SessionType::A2DP_HARDWARE_OFFLOAD_DECODING_DATAPATH);
-  bool is_offload_le_audio_session =
+  bool is_offload_le_audio_unicast_session =
       (session_type_ ==
            SessionType::LE_AUDIO_HARDWARE_OFFLOAD_ENCODING_DATAPATH ||
        session_type_ ==
            SessionType::LE_AUDIO_HARDWARE_OFFLOAD_DECODING_DATAPATH);
+  bool is_offload_le_audio_broadcast_session =
+      (session_type_ ==
+       SessionType::LE_AUDIO_BROADCAST_HARDWARE_OFFLOAD_ENCODING_DATAPATH);
   auto audio_config_tag = audio_config.getTag();
   bool is_software_audio_config =
       (is_software_session &&
@@ -286,11 +291,15 @@
   bool is_a2dp_offload_audio_config =
       (is_offload_a2dp_session &&
        audio_config_tag == AudioConfiguration::a2dpConfig);
-  bool is_le_audio_offload_audio_config =
-      (is_offload_le_audio_session &&
+  bool is_le_audio_offload_unicast_audio_config =
+      (is_offload_le_audio_unicast_session &&
        audio_config_tag == AudioConfiguration::leAudioConfig);
+  bool is_le_audio_offload_broadcast_audio_config =
+      (is_offload_le_audio_broadcast_session &&
+       audio_config_tag == AudioConfiguration::leAudioBroadcastConfig);
   if (!is_software_audio_config && !is_a2dp_offload_audio_config &&
-      !is_le_audio_offload_audio_config) {
+      !is_le_audio_offload_unicast_audio_config &&
+      !is_le_audio_offload_broadcast_audio_config) {
     return false;
   }
   audio_config_ = std::make_unique<AudioConfiguration>(audio_config);
diff --git a/boot/1.1/default/boot_control/include/libboot_control/libboot_control.h b/boot/1.1/default/boot_control/include/libboot_control/libboot_control.h
index ac17d6d..572a8b6 100644
--- a/boot/1.1/default/boot_control/include/libboot_control/libboot_control.h
+++ b/boot/1.1/default/boot_control/include/libboot_control/libboot_control.h
@@ -25,9 +25,8 @@
 
 // Helper library to implement the IBootControl HAL using the misc partition.
 class BootControl {
-  using MergeStatus = ::android::hardware::boot::V1_1::MergeStatus;
-
  public:
+  using MergeStatus = ::android::hardware::boot::V1_1::MergeStatus;
   bool Init();
   unsigned int GetNumberSlots();
   unsigned int GetCurrentSlot();
diff --git a/boot/1.1/default/boot_control/include/private/boot_control_definition.h b/boot/1.1/default/boot_control/include/private/boot_control_definition.h
index 8f02111..57c2f73 100644
--- a/boot/1.1/default/boot_control/include/private/boot_control_definition.h
+++ b/boot/1.1/default/boot_control/include/private/boot_control_definition.h
@@ -14,6 +14,9 @@
  * limitations under the License.
  */
 
+#include <stdint.h>
+
+#include <bootloader_message/bootloader_message.h>
 
 /**
  * The A/B-specific bootloader message structure (4-KiB).
diff --git a/boot/1.1/vts/functional/VtsHalBootV1_1TargetTest.cpp b/boot/1.1/vts/functional/VtsHalBootV1_1TargetTest.cpp
index c38f257..05f136e 100644
--- a/boot/1.1/vts/functional/VtsHalBootV1_1TargetTest.cpp
+++ b/boot/1.1/vts/functional/VtsHalBootV1_1TargetTest.cpp
@@ -1,4 +1,5 @@
 /*
+
  * Copyright (C) 2019 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
@@ -19,6 +20,7 @@
 #include <vector>
 
 #include <android-base/logging.h>
+#include <android-base/properties.h>
 #include <android/hardware/boot/1.1/IBootControl.h>
 #include <android/hardware/boot/1.1/types.h>
 #include <gmock/gmock.h>
@@ -37,9 +39,21 @@
 using ::android::hardware::boot::V1_1::MergeStatus;
 using ::testing::Contains;
 
+bool IsVirtualAbEnabled();
+
+#define SKIP_IF_NON_VIRTUAL_AB()                                                        \
+    do {                                                                                \
+        if (!IsVirtualAbEnabled()) GTEST_SKIP() << "Test for Virtual A/B devices only"; \
+    } while (0)
+
+bool IsVirtualAbEnabled() {
+    return android::base::GetBoolProperty("ro.virtual_ab.enabled", false);
+}
+
 class BootHidlTest : public testing::TestWithParam<std::string> {
   public:
     virtual void SetUp() override {
+        SKIP_IF_NON_VIRTUAL_AB();
         boot = IBootControl::getService(GetParam());
         ASSERT_NE(boot, nullptr);
 
diff --git a/boot/aidl/Android.bp b/boot/aidl/Android.bp
new file mode 100644
index 0000000..be38245
--- /dev/null
+++ b/boot/aidl/Android.bp
@@ -0,0 +1,40 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+aidl_interface {
+    name: "android.hardware.boot",
+    vendor_available: true,
+    srcs: ["android/hardware/boot/*.aidl"],
+    stability: "vintf",
+    recovery_available: true,
+    backend: {
+        java: {
+            sdk_version: "module_current",
+        },
+        cpp: {
+            enabled: false,
+        },
+    },
+}
diff --git a/boot/aidl/aidl_api/android.hardware.boot/current/android/hardware/boot/IBootControl.aidl b/boot/aidl/aidl_api/android.hardware.boot/current/android/hardware/boot/IBootControl.aidl
new file mode 100644
index 0000000..c8ab51e
--- /dev/null
+++ b/boot/aidl/aidl_api/android.hardware.boot/current/android/hardware/boot/IBootControl.aidl
@@ -0,0 +1,50 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.boot;
+@VintfStability
+interface IBootControl {
+  int getActiveBootSlot();
+  int getCurrentSlot();
+  int getNumberSlots();
+  android.hardware.boot.MergeStatus getSnapshotMergeStatus();
+  String getSuffix(in int slot);
+  boolean isSlotBootable(in int slot);
+  boolean isSlotMarkedSuccessful(in int slot);
+  void markBootSuccessful();
+  void setActiveBootSlot(in int slot);
+  void setSlotAsUnbootable(in int slot);
+  void setSnapshotMergeStatus(in android.hardware.boot.MergeStatus status);
+  const int INVALID_SLOT = -1;
+  const int COMMAND_FAILED = -2;
+}
diff --git a/boot/aidl/aidl_api/android.hardware.boot/current/android/hardware/boot/MergeStatus.aidl b/boot/aidl/aidl_api/android.hardware.boot/current/android/hardware/boot/MergeStatus.aidl
new file mode 100644
index 0000000..53c6204
--- /dev/null
+++ b/boot/aidl/aidl_api/android.hardware.boot/current/android/hardware/boot/MergeStatus.aidl
@@ -0,0 +1,42 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.boot;
+@Backing(type="int") @VintfStability
+enum MergeStatus {
+  NONE = 0,
+  UNKNOWN = 1,
+  SNAPSHOTTED = 2,
+  MERGING = 3,
+  CANCELLED = 4,
+}
diff --git a/boot/aidl/android/hardware/boot/IBootControl.aidl b/boot/aidl/android/hardware/boot/IBootControl.aidl
new file mode 100644
index 0000000..6c9e8ce
--- /dev/null
+++ b/boot/aidl/android/hardware/boot/IBootControl.aidl
@@ -0,0 +1,158 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+package android.hardware.boot;
+
+import android.hardware.boot.MergeStatus;
+
+@VintfStability
+interface IBootControl {
+    const int INVALID_SLOT = -1;
+    const int COMMAND_FAILED = -2;
+    /**
+     * Returns the active slot to boot into on the next boot. If
+     * setActiveBootSlot() has been called, the getter function should return the
+     * same slot as the one provided in the last setActiveBootSlot() call.
+     * The returned value is always guaranteed to be strictly less than the
+     * value returned by getNumberSlots. Slots start at 0 and finish at
+     * getNumberSlots() - 1. For instance, a system with A/B must return 0 or 1.
+     * @return the active slot to boot into on the next boot.
+     */
+    int getActiveBootSlot();
+
+    /**
+     * getCurrentSlot() returns the slot number of that the current boot is booted
+     * from, for example slot number 0 (Slot A). It is assumed that if the current
+     * slot is A, then the block devices underlying B can be accessed directly
+     * without any risk of corruption.
+     * The returned value is always guaranteed to be strictly less than the
+     * value returned by getNumberSlots. Slots start at 0 and finish at
+     * getNumberSlots() - 1. The value returned here must match the suffix passed
+     * from the bootloader, regardless of which slot is active or successful.
+     * @return the slot number of that the current boot is booted
+     */
+    int getCurrentSlot();
+
+    /**
+     * getNumberSlots() returns the number of available slots.
+     * For instance, a system with a single set of partitions must return
+     * 1, a system with A/B must return 2, A/B/C -> 3 and so on. A system with
+     * less than two slots doesn't support background updates, for example if
+     * running from a virtual machine with only one copy of each partition for the
+     * purpose of testing.
+     * @return number of available slots
+     */
+    int getNumberSlots();
+
+    /**
+     * Returns whether a snapshot-merge of any dynamic partition is in progress.
+     *
+     * This function must return the merge status set by the last setSnapshotMergeStatus call and
+     * recorded by the bootloader with one exception. If the partitions are being flashed from the
+     * bootloader such that the pending merge must be canceled (for example, if the super partition
+     * is being flashed), this function must return CANCELLED.
+     *
+     * @param out success True if the merge status is read successfully, false otherwise.
+     * @return Merge status.
+     */
+    MergeStatus getSnapshotMergeStatus();
+
+    /**
+     * getSuffix() returns the string suffix used by partitions that correspond to
+     * the slot number passed in as a parameter. The bootloader must pass the
+     * suffix of the currently active slot either through a kernel command line
+     * property at androidboot.slot_suffix, or the device tree at
+     * /firmware/android/slot_suffix.
+     * @return suffix for the input slot, or the empty string "" if slot
+     * does not match an existing slot.
+     */
+    String getSuffix(in int slot);
+
+    /**
+     * isSlotBootable() returns if the slot passed in parameter is bootable. Note
+     * that slots can be made unbootable by both the bootloader and by the OS
+     * using setSlotAsUnbootable.
+     * @return true if the slot is bootable, false if it's not.
+     * @throws service specific error INVALID_SLOT if slot is invalid.
+     */
+    boolean isSlotBootable(in int slot);
+
+    /**
+     * isSlotMarkedSuccessful() returns if the slot passed in parameter has been
+     * marked as successful using markBootSuccessful. Note that only the current
+     * slot can be marked as successful but any slot can be queried.
+     * @return true if the slot has been marked as successful, false if it has
+     * not.
+     * @throws service specific error INVALID_SLOT if slot is invalid.
+     */
+    boolean isSlotMarkedSuccessful(in int slot);
+
+    /**
+     * markBootSuccessful() marks the current slot as having booted successfully.
+     *
+     * @throws Service specific error COMMAND_FAILED if command failed.
+     */
+    void markBootSuccessful();
+
+    /**
+     * setActiveBootSlot() marks the slot passed in parameter as the active boot
+     * slot (see getCurrentSlot for an explanation of the "slot" parameter). This
+     * overrides any previous call to setSlotAsUnbootable.
+     * @throws Service specific error INVALID_SLOT if slot is invalid, or COMMAND_FAILED if
+     * operation failed.
+     */
+    void setActiveBootSlot(in int slot);
+
+    /**
+     * setSlotAsUnbootable() marks the slot passed in parameter as
+     * an unbootable. This can be used while updating the contents of the slot's
+     * partitions, so that the system must not attempt to boot a known bad set up.
+     * @throws Service specific error INVALID_SLOT if slot is invalid, or COMMAND_FAILED if
+     * operation failed.
+     */
+    void setSlotAsUnbootable(in int slot);
+
+    /**
+     * Sets whether a snapshot-merge of any dynamic partition is in progress.
+     *
+     * After the merge status is set to a given value, subsequent calls to
+     * getSnapshotMergeStatus must return the set value.
+     *
+     * The merge status must be persistent across reboots. That is, getSnapshotMergeStatus
+     * must return the same value after a reboot if the merge status is not altered in any way
+     * (e.g. set by setSnapshotMergeStatus or set to CANCELLED by bootloader).
+     *
+     * Read/write access to the merge status must be atomic. When the HAL is processing a
+     * setSnapshotMergeStatus call, all subsequent calls to getSnapshotMergeStatus must block until
+     * setSnapshotMergeStatus has returned.
+     *
+     * A MERGING state indicates that dynamic partitions are partially comprised by blocks in the
+     * userdata partition.
+     *
+     * When the merge status is set to MERGING, the following operations must be prohibited from the
+     * bootloader:
+     *  - Flashing or erasing "userdata" or "metadata".
+     *
+     * The following operations may be prohibited when the status is set to MERGING. If not
+     * prohibited, it is recommended that the user receive a warning.
+     *  - Changing the active slot (e.g. via "fastboot set_active")
+     *
+     * @param status Merge status.
+     *
+     * @throws service specific error COMMAND_FAILED if operation failed.
+     */
+    void setSnapshotMergeStatus(in MergeStatus status);
+}
diff --git a/boot/aidl/android/hardware/boot/MergeStatus.aidl b/boot/aidl/android/hardware/boot/MergeStatus.aidl
new file mode 100644
index 0000000..16ac85f
--- /dev/null
+++ b/boot/aidl/android/hardware/boot/MergeStatus.aidl
@@ -0,0 +1,42 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+package android.hardware.boot;
+
+@VintfStability
+@Backing(type="int")
+enum MergeStatus {
+    /**
+     * No snapshot or merge is in progress.
+     */
+    NONE = 0,
+    /**
+     * The merge status could not be determined.
+     */
+    UNKNOWN,
+    /**
+     * Partitions are being snapshotted, but no merge has been started.
+     */
+    SNAPSHOTTED,
+    /**
+     * At least one partition has merge is in progress.
+     */
+    MERGING,
+    /**
+     * A merge was in progress, but it was canceled by the bootloader.
+     */
+    CANCELLED,
+}
diff --git a/boot/aidl/client/Android.bp b/boot/aidl/client/Android.bp
new file mode 100644
index 0000000..db4a7ea
--- /dev/null
+++ b/boot/aidl/client/Android.bp
@@ -0,0 +1,31 @@
+
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_library {
+    name: "libboot_control_client",
+    srcs: [
+        "BootControlClient.cpp"
+    ],
+    export_include_dirs: ["include"],
+    export_shared_lib_headers: ["android.hardware.boot-V1-ndk"],
+    recovery_available: true,
+    shared_libs: [
+        "android.hardware.boot-V1-ndk",
+        "android.hardware.boot@1.0",
+        "android.hardware.boot@1.1",
+        "android.hardware.boot@1.2",
+        "libhidlbase",
+        "libbinder_ndk",
+        "libbase",
+        "libcutils",
+        "libutils",
+    ],
+}
diff --git a/boot/aidl/client/BootControlClient.cpp b/boot/aidl/client/BootControlClient.cpp
new file mode 100644
index 0000000..89258d2
--- /dev/null
+++ b/boot/aidl/client/BootControlClient.cpp
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <BootControlClient.h>
+
+#include <aidl/android/hardware/boot/IBootControl.h>
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/hardware/boot/1.0/IBootControl.h>
+#include <android/hardware/boot/1.1/IBootControl.h>
+#include <android/hardware/boot/1.2/IBootControl.h>
+#include "utils/StrongPointer.h"
+
+#define CONCAT(x, y) x##y
+
+#define LOG_NDK_STATUS(x)                                                                   \
+    do {                                                                                    \
+        const auto CONCAT(status, __COUNTER__) = x;                                         \
+        if (!CONCAT(status, __COUNTER__).isOk()) {                                          \
+            LOG(ERROR) << #x << " failed " << CONCAT(status, __COUNTER__).getDescription(); \
+        }                                                                                   \
+    } while (0)
+
+using aidl::android::hardware::boot::MergeStatus;
+
+std::ostream& operator<<(std::ostream& os, MergeStatus status) {
+    switch (status) {
+        case MergeStatus::NONE:
+            os << "MergeStatus::NONE";
+            break;
+        case MergeStatus::UNKNOWN:
+            os << "MergeStatus::UNKNOWN";
+            break;
+        case MergeStatus::SNAPSHOTTED:
+            os << "MergeStatus::SNAPSHOTTED";
+            break;
+        case MergeStatus::MERGING:
+            os << "MergeStatus::MERGING";
+            break;
+        case MergeStatus::CANCELLED:
+            os << "MergeStatus::CANCELLED";
+            break;
+        default:
+            os << static_cast<int>(status);
+            break;
+    }
+    return os;
+}
+
+namespace android::hal {
+class BootControlClientAidl final : public BootControlClient {
+    using IBootControl = ::aidl::android::hardware::boot::IBootControl;
+
+  public:
+    BootControlClientAidl(std::shared_ptr<IBootControl> module) : module_(module) {}
+
+    BootControlVersion GetVersion() const override { return BootControlVersion::BOOTCTL_AIDL; }
+
+    ~BootControlClientAidl() = default;
+    virtual int32_t GetNumSlots() const {
+        int32_t ret = -1;
+        LOG_NDK_STATUS(module_->getNumberSlots(&ret));
+        return ret;
+    }
+
+    int32_t GetCurrentSlot() const {
+        int32_t ret = -1;
+        LOG_NDK_STATUS(module_->getCurrentSlot(&ret));
+        return ret;
+    }
+    MergeStatus getSnapshotMergeStatus() const {
+        MergeStatus status = MergeStatus::UNKNOWN;
+        LOG_NDK_STATUS(module_->getSnapshotMergeStatus(&status));
+        return status;
+    }
+    std::string GetSuffix(int32_t slot) const {
+        std::string ret;
+        const auto status = module_->getSuffix(slot, &ret);
+        if (!status.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << status.getDescription();
+            return {};
+        }
+        return ret;
+    }
+
+    std::optional<bool> IsSlotBootable(int32_t slot) const {
+        bool ret = false;
+        const auto status = module_->isSlotBootable(slot, &ret);
+        if (!status.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << status.getDescription();
+            return {};
+        }
+        return ret;
+    }
+
+    CommandResult MarkSlotUnbootable(int32_t slot) {
+        const auto status = module_->setSlotAsUnbootable(slot);
+        if (!status.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << status.getDescription();
+        }
+        return {.success = status.isOk(), .errMsg = status.getDescription()};
+    }
+
+    CommandResult SetActiveBootSlot(int slot) {
+        const auto status = module_->setActiveBootSlot(slot);
+        if (!status.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << status.getDescription();
+        }
+        return {.success = status.isOk(), .errMsg = status.getDescription()};
+    }
+    int GetActiveBootSlot() const {
+        int ret = -1;
+        LOG_NDK_STATUS(module_->getActiveBootSlot(&ret));
+        return ret;
+    }
+
+    // Check if |slot| is marked boot successfully.
+    std::optional<bool> IsSlotMarkedSuccessful(int slot) const {
+        bool ret = false;
+        const auto status = module_->isSlotMarkedSuccessful(slot, &ret);
+        if (!status.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << status.getDescription();
+            return {};
+        }
+        return ret;
+    }
+
+    CommandResult MarkBootSuccessful() {
+        const auto status = module_->markBootSuccessful();
+        if (!status.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << " failed " << status.getDescription();
+        }
+        return {.success = status.isOk(), .errMsg = status.getDescription()};
+    }
+
+    CommandResult SetSnapshotMergeStatus(aidl::android::hardware::boot::MergeStatus merge_status) {
+        const auto status = module_->setSnapshotMergeStatus(merge_status);
+        if (!status.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << merge_status << ")"
+                       << " failed " << status.getDescription();
+        }
+        return {.success = status.isOk(), .errMsg = status.getDescription()};
+    }
+
+  private:
+    const std::shared_ptr<IBootControl> module_;
+};
+
+using namespace android::hardware::boot;
+
+class BootControlClientHIDL final : public BootControlClient {
+  public:
+    BootControlClientHIDL(android::sp<V1_0::IBootControl> module_v1,
+                          android::sp<V1_1::IBootControl> module_v1_1,
+                          android::sp<V1_2::IBootControl> module_v1_2)
+        : module_v1_(module_v1), module_v1_1_(module_v1_1), module_v1_2_(module_v1_2) {
+        CHECK(module_v1_ != nullptr);
+    }
+    BootControlVersion GetVersion() const override {
+        if (module_v1_2_ != nullptr) {
+            return BootControlVersion::BOOTCTL_V1_2;
+        } else if (module_v1_1_ != nullptr) {
+            return BootControlVersion::BOOTCTL_V1_1;
+        } else {
+            return BootControlVersion::BOOTCTL_V1_0;
+        }
+    }
+    int32_t GetNumSlots() const {
+        const auto ret = module_v1_->getNumberSlots();
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << " failed " << ret.description();
+        }
+        return ret.withDefault(-1);
+    }
+
+    int32_t GetCurrentSlot() const {
+        const auto ret = module_v1_->getCurrentSlot();
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << " failed " << ret.description();
+        }
+        return ret.withDefault(-1);
+    }
+
+    std::string GetSuffix(int32_t slot) const {
+        std::string suffix;
+        const auto ret = module_v1_->getSuffix(
+                slot,
+                [&](const ::android::hardware::hidl_string& slotSuffix) { suffix = slotSuffix; });
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << ret.description();
+        }
+        return suffix;
+    }
+
+    std::optional<bool> IsSlotBootable(int32_t slot) const {
+        const auto ret = module_v1_->isSlotBootable(slot);
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << ret.description();
+            return {};
+        }
+        const auto bool_result = ret.withDefault(V1_0::BoolResult::INVALID_SLOT);
+        if (bool_result == V1_0::BoolResult::INVALID_SLOT) {
+            return {};
+        }
+        return bool_result == V1_0::BoolResult::TRUE;
+    }
+
+    CommandResult MarkSlotUnbootable(int32_t slot) {
+        CommandResult result;
+        const auto ret =
+                module_v1_->setSlotAsUnbootable(slot, [&](const V1_0::CommandResult& error) {
+                    result.success = error.success;
+                    result.errMsg = error.errMsg;
+                });
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << ret.description();
+        }
+        return result;
+    }
+
+    CommandResult SetActiveBootSlot(int32_t slot) {
+        CommandResult result;
+        const auto ret = module_v1_->setActiveBootSlot(slot, [&](const V1_0::CommandResult& error) {
+            result.success = error.success;
+            result.errMsg = error.errMsg;
+        });
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << ret.description();
+        }
+        return result;
+    }
+
+    CommandResult MarkBootSuccessful() {
+        CommandResult result;
+        const auto ret = module_v1_->markBootSuccessful([&](const V1_0::CommandResult& error) {
+            result.success = error.success;
+            result.errMsg = error.errMsg;
+        });
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << " failed " << ret.description();
+        }
+        return result;
+    }
+
+    std::optional<bool> IsSlotMarkedSuccessful(int32_t slot) const {
+        const auto ret = module_v1_->isSlotMarkedSuccessful(slot);
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << slot << ")"
+                       << " failed " << ret.description();
+            return {};
+        }
+        const auto bool_result = ret.withDefault(V1_0::BoolResult::INVALID_SLOT);
+        if (bool_result == V1_0::BoolResult::INVALID_SLOT) {
+            return {};
+        }
+        return bool_result == V1_0::BoolResult::TRUE;
+    }
+
+    MergeStatus getSnapshotMergeStatus() const {
+        if (module_v1_1_ == nullptr) {
+            LOG(ERROR) << __FUNCTION__ << " is unsupported, requires at least boot v1.1";
+            return MergeStatus::UNKNOWN;
+        }
+        const auto ret = module_v1_1_->getSnapshotMergeStatus();
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << " failed " << ret.description();
+        }
+        return static_cast<MergeStatus>(
+                ret.withDefault(static_cast<V1_1::MergeStatus>(MergeStatus::UNKNOWN)));
+    }
+
+    CommandResult SetSnapshotMergeStatus(MergeStatus merge_status) {
+        if (module_v1_1_ == nullptr) {
+            return {.success = false,
+                    .errMsg = "setSnapshotMergeStatus is unsupported, requires at least boot v1.1"};
+        }
+        const auto ret =
+                module_v1_1_->setSnapshotMergeStatus(static_cast<V1_1::MergeStatus>(merge_status));
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << "(" << merge_status << ")"
+                       << " failed " << ret.description();
+        }
+        return {.success = ret.isOk(), .errMsg = ret.description()};
+    }
+
+    int32_t GetActiveBootSlot() const {
+        if (module_v1_2_ == nullptr) {
+            LOG(ERROR) << __FUNCTION__ << " is unsupported, requires at least boot v1.2";
+            return -1;
+        }
+        const auto ret = module_v1_2_->getActiveBootSlot();
+        if (!ret.isOk()) {
+            LOG(ERROR) << __FUNCTION__ << " failed " << ret.description();
+        }
+        return ret.withDefault(-1);
+    }
+
+  private:
+    android::sp<V1_0::IBootControl> module_v1_;
+    android::sp<V1_1::IBootControl> module_v1_1_;
+    android::sp<V1_2::IBootControl> module_v1_2_;
+};
+
+std::unique_ptr<BootControlClient> BootControlClient::WaitForService() {
+    const auto instance_name =
+            std::string(::aidl::android::hardware::boot::IBootControl::descriptor) + "/default";
+
+    if (AServiceManager_isDeclared(instance_name.c_str())) {
+        auto module = ::aidl::android::hardware::boot::IBootControl::fromBinder(
+                ndk::SpAIBinder(AServiceManager_waitForService(instance_name.c_str())));
+        if (module == nullptr) {
+            LOG(ERROR) << "AIDL " << instance_name
+                       << " is declared but waitForService returned nullptr.";
+            return nullptr;
+        }
+        LOG(INFO) << "Using AIDL version of IBootControl";
+        return std::make_unique<BootControlClientAidl>(module);
+    }
+    LOG(INFO) << "AIDL IBootControl not available, falling back to HIDL.";
+
+    android::sp<V1_0::IBootControl> v1_0_module;
+    android::sp<V1_1::IBootControl> v1_1_module;
+    android::sp<V1_2::IBootControl> v1_2_module;
+    v1_0_module = V1_0::IBootControl::getService();
+    if (v1_0_module == nullptr) {
+        LOG(ERROR) << "Error getting bootctrl v1.0 module.";
+        return nullptr;
+    }
+    v1_1_module = V1_1::IBootControl::castFrom(v1_0_module);
+    v1_2_module = V1_2::IBootControl::castFrom(v1_0_module);
+    if (v1_2_module != nullptr) {
+        LOG(INFO) << "Using HIDL version 1.2 of IBootControl";
+    } else if (v1_1_module != nullptr) {
+        LOG(INFO) << "Using HIDL version 1.1 of IBootControl";
+    } else {
+        LOG(INFO) << "Using HIDL version 1.0 of IBootControl";
+    }
+
+    return std::make_unique<BootControlClientHIDL>(v1_0_module, v1_1_module, v1_2_module);
+}
+
+}  // namespace android::hal
diff --git a/boot/aidl/client/include/BootControlClient.h b/boot/aidl/client/include/BootControlClient.h
new file mode 100644
index 0000000..472e82e
--- /dev/null
+++ b/boot/aidl/client/include/BootControlClient.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BOOT_CONTROL_CLIENT_H_
+#define __BOOT_CONTROL_CLIENT_H_
+
+#include <aidl/android/hardware/boot/MergeStatus.h>
+
+#include <stdint.h>
+
+#include <memory>
+#include <optional>
+
+namespace android::hal {
+
+struct CommandResult {
+    bool success;
+    std::string errMsg;
+    constexpr bool IsOk() const { return success; }
+};
+
+enum class BootControlVersion { BOOTCTL_V1_0, BOOTCTL_V1_1, BOOTCTL_V1_2, BOOTCTL_AIDL };
+
+class BootControlClient {
+  public:
+    using MergeStatus = aidl::android::hardware::boot::MergeStatus;
+    virtual ~BootControlClient() = default;
+    virtual BootControlVersion GetVersion() const = 0;
+    // Return the number of update slots in the system. A system will normally
+    // have two slots, named "A" and "B" in the documentation, but sometimes
+    // images running from other media can have only one slot, like some USB
+    // image. Systems with only one slot won't be able to update.
+    [[nodiscard]] virtual int32_t GetNumSlots() const = 0;
+
+    // Return the slot where we are running the system from. On success, the
+    // result is a number between 0 and GetNumSlots() - 1. Otherwise, log an error
+    // and return kInvalidSlot.
+    [[nodiscard]] virtual int32_t GetCurrentSlot() const = 0;
+
+    // Return string suffix for input slot. Usually, for slot 0 the suffix is _a, and for slot 1 the
+    // suffix is _b.
+    [[nodiscard]] virtual std::string GetSuffix(int32_t slot) const = 0;
+
+    // Returns whether the passed |slot| is marked as bootable. Returns false if
+    // the slot is invalid.
+    [[nodiscard]] virtual std::optional<bool> IsSlotBootable(int32_t slot) const = 0;
+
+    // Mark the specified slot unbootable. No other slot flags are modified.
+    // Returns true on success.
+    [[nodiscard]] virtual CommandResult MarkSlotUnbootable(int32_t slot) = 0;
+
+    // Set the passed |slot| as the preferred boot slot. Returns whether it
+    // succeeded setting the active slot. If succeeded, on next boot the
+    // bootloader will attempt to load the |slot| marked as active. Note that this
+    // method doesn't change the value of GetCurrentSlot() on the current boot.
+    // Return true if operation succeeded.
+    [[nodiscard]] virtual CommandResult SetActiveBootSlot(int32_t slot) = 0;
+
+    // Check if |slot| is marked boot successfully. Return empty optional if the RPC call failed.
+    [[nodiscard]] virtual std::optional<bool> IsSlotMarkedSuccessful(int32_t slot) const = 0;
+
+    // Mark boot as successful. Return an error message if operation failed.
+    [[nodiscard]] virtual CommandResult MarkBootSuccessful() = 0;
+
+    // Added in IBootControl v1.1
+    // Return the current merge status.
+    [[nodiscard]] virtual MergeStatus getSnapshotMergeStatus() const = 0;
+
+    // Set snapshot merge status, return true if succeeded.
+    [[nodiscard]] virtual CommandResult SetSnapshotMergeStatus(MergeStatus status) = 0;
+
+    // Added in IBootControl v1.2
+    // Get the active slot. In other words, the slot which will be used on
+    // next system reboot. This should match the |slot| parameter of last
+    // successful call to |SetActiveBootSlot|.
+    // Return 0xFFFFFFFF if underlying HAL doesn't support this operation.
+    [[nodiscard]] virtual int32_t GetActiveBootSlot() const = 0;
+
+    [[nodiscard]] static std::unique_ptr<BootControlClient> WaitForService();
+};
+
+}  // namespace android::hal
+
+#endif
diff --git a/boot/aidl/default/Android.bp b/boot/aidl/default/Android.bp
new file mode 100644
index 0000000..6aefae8
--- /dev/null
+++ b/boot/aidl/default/Android.bp
@@ -0,0 +1,43 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_binary {
+    name: "android.hardware.boot-service.default",
+    defaults: ["libboot_control_defaults"],
+    relative_install_path: "hw",
+    init_rc: ["boot-default.rc"],
+    vintf_fragments: ["boot-default.xml"],
+    vendor: true,
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+        "android.hardware.boot@1.1",
+        "android.hardware.boot-V1-ndk",
+    ],
+    static_libs: [
+        "libboot_control",
+    ],
+    srcs: ["main.cpp", "BootControl.cpp"],
+}
diff --git a/boot/aidl/default/BootControl.cpp b/boot/aidl/default/BootControl.cpp
new file mode 100644
index 0000000..4e3c21b
--- /dev/null
+++ b/boot/aidl/default/BootControl.cpp
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "BootControl.h"
+#include <cstdint>
+
+#include <android-base/logging.h>
+
+using HIDLMergeStatus = ::android::bootable::BootControl::MergeStatus;
+using ndk::ScopedAStatus;
+
+namespace aidl::android::hardware::boot {
+
+BootControl::BootControl() {
+    CHECK(impl_.Init());
+}
+
+ScopedAStatus BootControl::getActiveBootSlot(int32_t* _aidl_return) {
+    *_aidl_return = impl_.GetActiveBootSlot();
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::getCurrentSlot(int32_t* _aidl_return) {
+    *_aidl_return = impl_.GetCurrentSlot();
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::getNumberSlots(int32_t* _aidl_return) {
+    *_aidl_return = impl_.GetNumberSlots();
+    return ScopedAStatus::ok();
+}
+
+namespace {
+
+static constexpr MergeStatus ToAIDLMergeStatus(HIDLMergeStatus status) {
+    switch (status) {
+        case HIDLMergeStatus::NONE:
+            return MergeStatus::NONE;
+        case HIDLMergeStatus::UNKNOWN:
+            return MergeStatus::UNKNOWN;
+        case HIDLMergeStatus::SNAPSHOTTED:
+            return MergeStatus::SNAPSHOTTED;
+        case HIDLMergeStatus::MERGING:
+            return MergeStatus::MERGING;
+        case HIDLMergeStatus::CANCELLED:
+            return MergeStatus::CANCELLED;
+    }
+}
+
+static constexpr HIDLMergeStatus ToHIDLMergeStatus(MergeStatus status) {
+    switch (status) {
+        case MergeStatus::NONE:
+            return HIDLMergeStatus::NONE;
+        case MergeStatus::UNKNOWN:
+            return HIDLMergeStatus::UNKNOWN;
+        case MergeStatus::SNAPSHOTTED:
+            return HIDLMergeStatus::SNAPSHOTTED;
+        case MergeStatus::MERGING:
+            return HIDLMergeStatus::MERGING;
+        case MergeStatus::CANCELLED:
+            return HIDLMergeStatus::CANCELLED;
+    }
+}
+
+}
+
+ScopedAStatus BootControl::getSnapshotMergeStatus(MergeStatus* _aidl_return) {
+    *_aidl_return = ToAIDLMergeStatus(impl_.GetSnapshotMergeStatus());
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::getSuffix(int32_t in_slot, std::string* _aidl_return) {
+    if (!impl_.IsValidSlot(in_slot)) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+                INVALID_SLOT, (std::string("Invalid slot ") + std::to_string(in_slot)).c_str());
+    }
+    *_aidl_return = impl_.GetSuffix(in_slot);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::isSlotBootable(int32_t in_slot, bool* _aidl_return) {
+    if (!impl_.IsValidSlot(in_slot)) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+                INVALID_SLOT, (std::string("Invalid slot ") + std::to_string(in_slot)).c_str());
+    }
+    *_aidl_return = impl_.IsSlotBootable(in_slot);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::isSlotMarkedSuccessful(int32_t in_slot, bool* _aidl_return) {
+    if (!impl_.IsValidSlot(in_slot)) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+                INVALID_SLOT, (std::string("Invalid slot ") + std::to_string(in_slot)).c_str());
+    }
+    *_aidl_return = impl_.IsSlotMarkedSuccessful(in_slot);
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::markBootSuccessful() {
+    if (!impl_.MarkBootSuccessful()) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(COMMAND_FAILED,
+                                                                  "Operation failed");
+    }
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::setActiveBootSlot(int32_t in_slot) {
+    if (!impl_.IsValidSlot(in_slot)) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+                INVALID_SLOT, (std::string("Invalid slot ") + std::to_string(in_slot)).c_str());
+    }
+    if (!impl_.SetActiveBootSlot(in_slot)) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(COMMAND_FAILED,
+                                                                  "Operation failed");
+    }
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::setSlotAsUnbootable(int32_t in_slot) {
+    if (!impl_.IsValidSlot(in_slot)) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+                INVALID_SLOT, (std::string("Invalid slot ") + std::to_string(in_slot)).c_str());
+    }
+    if (!impl_.SetSlotAsUnbootable(in_slot)) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(COMMAND_FAILED,
+                                                                  "Operation failed");
+    }
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus BootControl::setSnapshotMergeStatus(MergeStatus in_status) {
+    if (!impl_.SetSnapshotMergeStatus(ToHIDLMergeStatus(in_status))) {
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(COMMAND_FAILED,
+                                                                  "Operation failed");
+    }
+    return ScopedAStatus::ok();
+}
+
+}  // namespace aidl::android::hardware::boot
diff --git a/boot/aidl/default/BootControl.h b/boot/aidl/default/BootControl.h
new file mode 100644
index 0000000..54cd32d
--- /dev/null
+++ b/boot/aidl/default/BootControl.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <aidl/android/hardware/boot/BnBootControl.h>
+#include <libboot_control/libboot_control.h>
+
+namespace aidl::android::hardware::boot {
+
+class BootControl final : public BnBootControl {
+  public:
+    BootControl();
+    ::ndk::ScopedAStatus getActiveBootSlot(int32_t* _aidl_return) override;
+    ::ndk::ScopedAStatus getCurrentSlot(int32_t* _aidl_return) override;
+    ::ndk::ScopedAStatus getNumberSlots(int32_t* _aidl_return) override;
+    ::ndk::ScopedAStatus getSnapshotMergeStatus(
+            ::aidl::android::hardware::boot::MergeStatus* _aidl_return) override;
+    ::ndk::ScopedAStatus getSuffix(int32_t in_slot, std::string* _aidl_return) override;
+    ::ndk::ScopedAStatus isSlotBootable(int32_t in_slot, bool* _aidl_return) override;
+    ::ndk::ScopedAStatus isSlotMarkedSuccessful(int32_t in_slot, bool* _aidl_return) override;
+    ::ndk::ScopedAStatus markBootSuccessful() override;
+    ::ndk::ScopedAStatus setActiveBootSlot(int32_t in_slot) override;
+    ::ndk::ScopedAStatus setSlotAsUnbootable(int32_t in_slot) override;
+    ::ndk::ScopedAStatus setSnapshotMergeStatus(
+            ::aidl::android::hardware::boot::MergeStatus in_status) override;
+
+  private:
+    ::android::bootable::BootControl impl_;
+};
+
+}  // namespace aidl::android::hardware::boot
diff --git a/boot/aidl/default/boot-default.rc b/boot/aidl/default/boot-default.rc
new file mode 100644
index 0000000..589f803
--- /dev/null
+++ b/boot/aidl/default/boot-default.rc
@@ -0,0 +1,5 @@
+service vendor.boot-default /vendor/bin/hw/android.hardware.boot-service.default
+    class early_hal
+    user root
+    group root
+
diff --git a/boot/aidl/default/boot-default.xml b/boot/aidl/default/boot-default.xml
new file mode 100644
index 0000000..23ccc4e
--- /dev/null
+++ b/boot/aidl/default/boot-default.xml
@@ -0,0 +1,6 @@
+<manifest version="1.0" type="device">
+    <hal format="aidl">
+        <name>android.hardware.boot</name>
+        <fqname>IBootControl/default</fqname>
+    </hal>
+</manifest>
diff --git a/boot/aidl/default/main.cpp b/boot/aidl/default/main.cpp
new file mode 100644
index 0000000..70b284e
--- /dev/null
+++ b/boot/aidl/default/main.cpp
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "BootControl.h"
+
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+using aidl::android::hardware::boot::BootControl;
+using aidl::android::hardware::boot::IBootControl;
+
+int main(int, char* argv[]) {
+    android::base::InitLogging(argv, android::base::KernelLogger);
+    ABinderProcess_setThreadPoolMaxThreadCount(0);
+    std::shared_ptr<IBootControl> service = ndk::SharedRefBase::make<BootControl>();
+
+    const std::string instance = std::string(BootControl::descriptor) + "/default";
+    auto status = AServiceManager_addService(service->asBinder().get(), instance.c_str());
+    CHECK_EQ(status, STATUS_OK) << "Failed to add service " << instance << " " << status;
+    LOG(INFO) << "IBootControl AIDL service running...";
+
+    ABinderProcess_joinThreadPool();
+    return EXIT_FAILURE;  // should not reach
+}
diff --git a/broadcastradio/1.0/default/OWNERS b/broadcastradio/1.0/default/OWNERS
index 57e6592..302fdd7 100644
--- a/broadcastradio/1.0/default/OWNERS
+++ b/broadcastradio/1.0/default/OWNERS
@@ -1,3 +1,4 @@
-elaurent@google.com
-mnaganov@google.com
-twasilczyk@google.com
+xuweilin@google.com
+oscarazu@google.com
+ericjeong@google.com
+keunyoung@google.com
diff --git a/broadcastradio/1.0/vts/functional/OWNERS b/broadcastradio/1.0/vts/functional/OWNERS
index 778c4a2..aa19d6a 100644
--- a/broadcastradio/1.0/vts/functional/OWNERS
+++ b/broadcastradio/1.0/vts/functional/OWNERS
@@ -1,2 +1,5 @@
 # Bug component: 533946
+xuweilin@google.com
 oscarazu@google.com
+ericjeong@google.com
+keunyoung@google.com
diff --git a/broadcastradio/1.1/default/OWNERS b/broadcastradio/1.1/default/OWNERS
index 136b607..259b91e 100644
--- a/broadcastradio/1.1/default/OWNERS
+++ b/broadcastradio/1.1/default/OWNERS
@@ -1,3 +1,5 @@
 # Automotive team
-egranata@google.com
-twasilczyk@google.com
+xuweilin@google.com
+oscarazu@google.com
+ericjeong@google.com
+keunyoung@google.com
diff --git a/broadcastradio/1.1/vts/OWNERS b/broadcastradio/1.1/vts/OWNERS
index 2c21c25..aa19d6a 100644
--- a/broadcastradio/1.1/vts/OWNERS
+++ b/broadcastradio/1.1/vts/OWNERS
@@ -1,3 +1,5 @@
 # Bug component: 533946
+xuweilin@google.com
 oscarazu@google.com
+ericjeong@google.com
 keunyoung@google.com
diff --git a/broadcastradio/2.0/default/OWNERS b/broadcastradio/2.0/default/OWNERS
index 136b607..259b91e 100644
--- a/broadcastradio/2.0/default/OWNERS
+++ b/broadcastradio/2.0/default/OWNERS
@@ -1,3 +1,5 @@
 # Automotive team
-egranata@google.com
-twasilczyk@google.com
+xuweilin@google.com
+oscarazu@google.com
+ericjeong@google.com
+keunyoung@google.com
diff --git a/broadcastradio/2.0/default/TunerSession.cpp b/broadcastradio/2.0/default/TunerSession.cpp
index 2ba4d02..cc2f1a5 100644
--- a/broadcastradio/2.0/default/TunerSession.cpp
+++ b/broadcastradio/2.0/default/TunerSession.cpp
@@ -241,13 +241,13 @@
     };
     std::copy_if(list.begin(), list.end(), std::back_inserter(filteredList), filterCb);
 
-    auto task = [this, list]() {
+    auto task = [this, filteredList]() {
         lock_guard<mutex> lk(mMut);
 
         ProgramListChunk chunk = {};
         chunk.purge = true;
         chunk.complete = true;
-        chunk.modified = hidl_vec<ProgramInfo>(list.begin(), list.end());
+        chunk.modified = hidl_vec<ProgramInfo>(filteredList.begin(), filteredList.end());
 
         mCallback->onProgramListUpdated(chunk);
     };
diff --git a/broadcastradio/2.0/vts/OWNERS b/broadcastradio/2.0/vts/OWNERS
index 1ff7407..09690ef 100644
--- a/broadcastradio/2.0/vts/OWNERS
+++ b/broadcastradio/2.0/vts/OWNERS
@@ -1,6 +1,8 @@
 # Automotive team
-egranata@google.com
-twasilczyk@google.com
+xuweilin@google.com
+oscarazu@google.com
+ericjeong@google.com
+keunyoung@google.com
 
 # VTS team
 dshi@google.com
diff --git a/broadcastradio/2.0/vts/functional/OWNERS b/broadcastradio/2.0/vts/functional/OWNERS
index 2c21c25..aa19d6a 100644
--- a/broadcastradio/2.0/vts/functional/OWNERS
+++ b/broadcastradio/2.0/vts/functional/OWNERS
@@ -1,3 +1,5 @@
 # Bug component: 533946
+xuweilin@google.com
 oscarazu@google.com
+ericjeong@google.com
 keunyoung@google.com
diff --git a/broadcastradio/2.0/vts/functional/VtsHalBroadcastradioV2_0TargetTest.cpp b/broadcastradio/2.0/vts/functional/VtsHalBroadcastradioV2_0TargetTest.cpp
index 615fde0..5e8a5cf 100644
--- a/broadcastradio/2.0/vts/functional/VtsHalBroadcastradioV2_0TargetTest.cpp
+++ b/broadcastradio/2.0/vts/functional/VtsHalBroadcastradioV2_0TargetTest.cpp
@@ -108,6 +108,7 @@
     bool openSession();
     bool getAmFmRegionConfig(bool full, AmFmRegionConfig* config);
     std::optional<utils::ProgramInfoSet> getProgramList();
+    std::optional<utils::ProgramInfoSet> getProgramList(const ProgramFilter& filter);
 
     sp<IBroadcastRadio> mModule;
     Properties mProperties;
@@ -239,9 +240,15 @@
 }
 
 std::optional<utils::ProgramInfoSet> BroadcastRadioHalTest::getProgramList() {
+    ProgramFilter emptyFilter = {};
+    return getProgramList(emptyFilter);
+}
+
+std::optional<utils::ProgramInfoSet> BroadcastRadioHalTest::getProgramList(
+        const ProgramFilter& filter) {
     EXPECT_TIMEOUT_CALL(*mCallback, onProgramListReady).Times(AnyNumber());
 
-    auto startResult = mSession->startProgramListUpdates({});
+    auto startResult = mSession->startProgramListUpdates(filter);
     if (startResult == Result::NOT_SUPPORTED) {
         printSkipped("Program list not supported");
         return std::nullopt;
@@ -810,20 +817,98 @@
 }
 
 /**
- * Test getting program list.
+ * Test getting program list using empty program filter.
  *
  * Verifies that:
  * - startProgramListUpdates either succeeds or returns NOT_SUPPORTED;
  * - the complete list is fetched within timeout::programListScan;
  * - stopProgramListUpdates does not crash.
  */
-TEST_P(BroadcastRadioHalTest, GetProgramList) {
+TEST_P(BroadcastRadioHalTest, GetProgramListFromEmptyFilter) {
     ASSERT_TRUE(openSession());
 
     getProgramList();
 }
 
 /**
+ * Test getting program list using AMFM frequency program filter.
+ *
+ * Verifies that:
+ * - startProgramListUpdates either succeeds or returns NOT_SUPPORTED;
+ * - the complete list is fetched within timeout::programListScan;
+ * - stopProgramListUpdates does not crash;
+ * - result for startProgramListUpdates using a filter with AMFM_FREQUENCY value of the first AMFM
+ *   program matches the expected result.
+ */
+TEST_P(BroadcastRadioHalTest, GetProgramListFromAmFmFilter) {
+    ASSERT_TRUE(openSession());
+
+    auto completeList = getProgramList();
+    if (!completeList) return;
+
+    ProgramFilter amfmFilter = {};
+    int expectedResultSize = 0;
+    uint64_t expectedFreq = 0;
+    for (auto&& program : *completeList) {
+        auto amfmIds = utils::getAllIds(program.selector, IdentifierType::AMFM_FREQUENCY);
+        EXPECT_LE(amfmIds.size(), 1u);
+        if (amfmIds.size() == 0) continue;
+
+        if (expectedResultSize == 0) {
+            expectedFreq = amfmIds[0];
+            amfmFilter.identifiers = {
+                    make_identifier(IdentifierType::AMFM_FREQUENCY, expectedFreq)};
+            expectedResultSize = 1;
+        } else if (amfmIds[0] == expectedFreq) {
+            expectedResultSize++;
+        }
+    }
+
+    if (expectedResultSize == 0) return;
+    auto amfmList = getProgramList(amfmFilter);
+    ASSERT_EQ(expectedResultSize, amfmList->size()) << "amfm filter result size is wrong";
+}
+
+/**
+ * Test getting program list using DAB ensemble program filter.
+ *
+ * Verifies that:
+ * - startProgramListUpdates either succeeds or returns NOT_SUPPORTED;
+ * - the complete list is fetched within timeout::programListScan;
+ * - stopProgramListUpdates does not crash;
+ * - result for startProgramListUpdates using a filter with DAB_ENSEMBLE value of the first DAB
+ *   program matches the expected result.
+ */
+TEST_P(BroadcastRadioHalTest, GetProgramListFromDabFilter) {
+    ASSERT_TRUE(openSession());
+
+    auto completeList = getProgramList();
+    if (!completeList) return;
+
+    ProgramFilter dabFilter = {};
+    int expectedResultSize = 0;
+    uint64_t expectedEnsemble = 0;
+    for (auto&& program : *completeList) {
+        auto dabEnsembles = utils::getAllIds(program.selector, IdentifierType::DAB_ENSEMBLE);
+        EXPECT_LE(dabEnsembles.size(), 1u);
+        if (dabEnsembles.size() == 0) continue;
+
+        if (expectedResultSize == 0) {
+            expectedEnsemble = dabEnsembles[0];
+            dabFilter.identifiers = {
+                    make_identifier(IdentifierType::DAB_ENSEMBLE, expectedEnsemble)};
+            expectedResultSize = 1;
+        } else if (dabEnsembles[0] == expectedEnsemble) {
+            expectedResultSize++;
+        }
+    }
+
+    if (expectedResultSize == 0) return;
+    auto dabList = getProgramList(dabFilter);
+    ASSERT_EQ(expectedResultSize, dabList->size()) << "dab filter result size is wrong";
+}
+
+/**
  * Test HD_STATION_NAME correctness.
  *
  * Verifies that if a program on the list contains HD_STATION_NAME identifier:
diff --git a/broadcastradio/common/OWNERS b/broadcastradio/common/OWNERS
index 136b607..259b91e 100644
--- a/broadcastradio/common/OWNERS
+++ b/broadcastradio/common/OWNERS
@@ -1,3 +1,5 @@
 # Automotive team
-egranata@google.com
-twasilczyk@google.com
+xuweilin@google.com
+oscarazu@google.com
+ericjeong@google.com
+keunyoung@google.com
diff --git a/broadcastradio/common/utils/WorkerThread.cpp b/broadcastradio/common/utils/WorkerThread.cpp
index 31f4d3f..dd87f53 100644
--- a/broadcastradio/common/utils/WorkerThread.cpp
+++ b/broadcastradio/common/utils/WorkerThread.cpp
@@ -31,7 +31,11 @@
     return lhs.when > rhs.when;
 }
 
-WorkerThread::WorkerThread() : mIsTerminating(false), mThread(&WorkerThread::threadLoop, this) {}
+WorkerThread::WorkerThread() : mIsTerminating(false) {
+    // putting mThread in constructor instead of initializer list
+    // to ensure all class members are init before mThread starts
+    mThread = std::thread(&WorkerThread::threadLoop, this);
+}
 
 WorkerThread::~WorkerThread() {
     {
diff --git a/camera/common/aidl/Android.bp b/camera/common/aidl/Android.bp
index 19de22d..d21ae58 100644
--- a/camera/common/aidl/Android.bp
+++ b/camera/common/aidl/Android.bp
@@ -19,11 +19,6 @@
         java: {
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/camera/device/aidl/Android.bp b/camera/device/aidl/Android.bp
index afc6b8d..365a5ff 100644
--- a/camera/device/aidl/Android.bp
+++ b/camera/device/aidl/Android.bp
@@ -27,11 +27,6 @@
             sdk_version: "module_current",
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/camera/device/aidl/android/hardware/camera/device/ICameraDevice.aidl b/camera/device/aidl/android/hardware/camera/device/ICameraDevice.aidl
index 57705bc..f940000 100644
--- a/camera/device/aidl/android/hardware/camera/device/ICameraDevice.aidl
+++ b/camera/device/aidl/android/hardware/camera/device/ICameraDevice.aidl
@@ -279,8 +279,10 @@
      * with specified torchStrength if the torch is OFF.
      *
      * The torchStrength value must be within the valid range i.e. >=1 and
-     * <= FLASH_INFO_STRENGTH_MAXIMUM_LEVEL. Whenever the torch is turned OFF,
-     * the brightness level will reset to FLASH_INFO_STRENGTH_DEFAULT_LEVEL.
+     * <= FLASH_INFO_STRENGTH_MAXIMUM_LEVEL. The FLASH_INFO_STRENGTH_MAXIMUM_LEVEL must
+     * be set to a level which will not cause any burn out issues. Whenever
+     * the torch is turned OFF, the brightness level will reset to
+     * FLASH_INFO_STRENGTH_DEFAULT_LEVEL.
      * When the client calls setTorchMode(ON) after turnOnTorchWithStrengthLevel(N),
      * the flash unit will have brightness level equal to N. This level does not
      * represent the real brightness units. It is linear in nature i.e. flashlight
diff --git a/camera/metadata/aidl/Android.bp b/camera/metadata/aidl/Android.bp
index 31d4b4d..301a943 100644
--- a/camera/metadata/aidl/Android.bp
+++ b/camera/metadata/aidl/Android.bp
@@ -19,11 +19,6 @@
         java: {
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/camera/provider/aidl/Android.bp b/camera/provider/aidl/Android.bp
index f082bce..87a94b2 100644
--- a/camera/provider/aidl/Android.bp
+++ b/camera/provider/aidl/Android.bp
@@ -25,11 +25,6 @@
         cpp: {
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/compatibility_matrices/Android.bp b/compatibility_matrices/Android.bp
index 422b37e..524242f 100644
--- a/compatibility_matrices/Android.bp
+++ b/compatibility_matrices/Android.bp
@@ -87,7 +87,6 @@
 
 vintf_compatibility_matrix {
     name: "framework_compatibility_matrix.current.xml",
-    enabled: false,
     stem: "compatibility_matrix.current.xml",
     srcs: [
         "compatibility_matrix.current.xml",
diff --git a/compatibility_matrices/Android.mk b/compatibility_matrices/Android.mk
index d6a44d0..d19f0da 100644
--- a/compatibility_matrices/Android.mk
+++ b/compatibility_matrices/Android.mk
@@ -103,6 +103,7 @@
     framework_compatibility_matrix.5.xml \
     framework_compatibility_matrix.6.xml \
     framework_compatibility_matrix.7.xml \
+    framework_compatibility_matrix.current.xml \
     framework_compatibility_matrix.device.xml \
 
 my_framework_matrix_deps += \
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
index 886f7f5..d899c2c 100644
--- a/compatibility_matrices/compatibility_matrix.current.xml
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -26,6 +26,18 @@
         </interface>
     </hal>
     <hal format="aidl" optional="true">
+        <name>android.hardware.audio.core</name>
+        <version>1</version>
+        <interface>
+            <name>IModule</name>
+            <instance>default</instance>
+        </interface>
+        <interface>
+            <name>IConfig</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="aidl" optional="true">
          <name>android.hardware.authsecret</name>
          <version>1</version>
          <interface>
@@ -130,6 +142,7 @@
         <interface>
             <name>IFingerprint</name>
             <instance>default</instance>
+            <instance>virtual</instance>
         </interface>
     </hal>
     <hal format="hidl" optional="true">
@@ -156,6 +169,13 @@
             <instance>default</instance>
         </interface>
     </hal>
+    <hal format="aidl" optional="true">
+        <name>android.hardware.boot</name>
+        <interface>
+            <name>IBootControl</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
     <hal format="hidl" optional="true">
         <name>android.hardware.broadcastradio</name>
         <version>1.0-1</version>
@@ -781,6 +801,14 @@
             <instance>default</instance>
         </interface>
     </hal>
+    <hal format="aidl" optional="true">
+        <name>android.hardware.wifi</name>
+        <version>1</version>
+        <interface>
+            <name>IWifi</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
     <hal format="hidl" optional="true">
         <name>android.hardware.wifi</name>
         <version>1.3-6</version>
diff --git a/confirmationui/support/Android.bp b/confirmationui/support/Android.bp
index 6ab83f2..1200115 100644
--- a/confirmationui/support/Android.bp
+++ b/confirmationui/support/Android.bp
@@ -36,7 +36,7 @@
     ],
     export_include_dirs: [
         "include",
-    ]
+    ],
 }
 
 cc_test {
@@ -56,6 +56,5 @@
         "libhidlbase",
     ],
     test_suites: ["general-tests"],
-    clang: true,
-    cflags: [ "-O0" ],
+    cflags: ["-O0"],
 }
diff --git a/contexthub/aidl/default/ContextHub.cpp b/contexthub/aidl/default/ContextHub.cpp
index 4c23cbc..35e4650 100644
--- a/contexthub/aidl/default/ContextHub.cpp
+++ b/contexthub/aidl/default/ContextHub.cpp
@@ -107,10 +107,9 @@
 ScopedAStatus ContextHub::onHostEndpointDisconnected(char16_t in_hostEndpointId) {
     if (mConnectedHostEndpoints.count(in_hostEndpointId) > 0) {
         mConnectedHostEndpoints.erase(in_hostEndpointId);
-        return ndk::ScopedAStatus::ok();
-    } else {
-        return ndk::ScopedAStatus(AStatus_fromExceptionCode(EX_ILLEGAL_ARGUMENT));
     }
+
+    return ndk::ScopedAStatus::ok();
 }
 
 }  // namespace contexthub
diff --git a/drm/aidl/Android.bp b/drm/aidl/Android.bp
index 0fdba31..6273a38 100644
--- a/drm/aidl/Android.bp
+++ b/drm/aidl/Android.bp
@@ -23,9 +23,6 @@
             sdk_version: "module_current",
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
             min_sdk_version: "current",
         },
     },
diff --git a/dumpstate/aidl/Android.bp b/dumpstate/aidl/Android.bp
index d9acc7a..63670bb 100644
--- a/dumpstate/aidl/Android.bp
+++ b/dumpstate/aidl/Android.bp
@@ -33,11 +33,6 @@
         java: {
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/gnss/aidl/Android.bp b/gnss/aidl/Android.bp
index 9f9090c..f45fe5d 100644
--- a/gnss/aidl/Android.bp
+++ b/gnss/aidl/Android.bp
@@ -36,11 +36,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/graphics/composer/2.1/utils/hwc2on1adapter/Android.bp b/graphics/composer/2.1/utils/hwc2on1adapter/Android.bp
index 0171dd6..3527cca 100644
--- a/graphics/composer/2.1/utils/hwc2on1adapter/Android.bp
+++ b/graphics/composer/2.1/utils/hwc2on1adapter/Android.bp
@@ -25,7 +25,6 @@
     name: "libhwc2on1adapter",
     vendor: true,
 
-    clang: true,
     cflags: [
         "-Wall",
         "-Werror",
diff --git a/graphics/composer/2.1/utils/hwc2onfbadapter/Android.bp b/graphics/composer/2.1/utils/hwc2onfbadapter/Android.bp
index 3965d12..d613ba9 100644
--- a/graphics/composer/2.1/utils/hwc2onfbadapter/Android.bp
+++ b/graphics/composer/2.1/utils/hwc2onfbadapter/Android.bp
@@ -25,7 +25,6 @@
     name: "libhwc2onfbadapter",
     vendor: true,
 
-    clang: true,
     cflags: [
         "-Wall",
         "-Wextra",
@@ -37,6 +36,9 @@
     ],
 
     header_libs: ["libhardware_headers"],
-    shared_libs: ["liblog", "libsync"],
+    shared_libs: [
+        "liblog",
+        "libsync",
+    ],
     export_include_dirs: ["include"],
 }
diff --git a/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp b/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp
index fa294ff..35225d9 100644
--- a/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp
+++ b/graphics/composer/2.4/vts/functional/VtsHalGraphicsComposerV2_4TargetTest.cpp
@@ -737,6 +737,39 @@
     }
 }
 
+/*
+ * Test that no two display configs are exactly the same.
+ */
+TEST_P(GraphicsComposerHidlTest, GetDisplayConfigNoRepetitions) {
+    for (const auto& display : mDisplays) {
+        std::vector<Config> configs = mComposerClient->getDisplayConfigs(display.get());
+        for (int i = 0; i < configs.size(); i++) {
+            for (int j = i + 1; j < configs.size(); j++) {
+                const int32_t width1 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[i], IComposerClient::Attribute::WIDTH);
+                const int32_t height1 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[i], IComposerClient::Attribute::HEIGHT);
+                const int32_t vsyncPeriod1 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[i], IComposerClient::Attribute::VSYNC_PERIOD);
+                const int32_t group1 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[i], IComposerClient::Attribute::CONFIG_GROUP);
+
+                const int32_t width2 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[j], IComposerClient::Attribute::WIDTH);
+                const int32_t height2 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[j], IComposerClient::Attribute::HEIGHT);
+                const int32_t vsyncPeriod2 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[j], IComposerClient::Attribute::VSYNC_PERIOD);
+                const int32_t group2 = mComposerClient->getDisplayAttribute_2_4(
+                        display.get(), configs[j], IComposerClient::Attribute::CONFIG_GROUP);
+
+                ASSERT_FALSE(width1 == width2 && height1 == height2 &&
+                             vsyncPeriod1 == vsyncPeriod2 && group1 == group2);
+            }
+        }
+    }
+}
+
 }  // namespace
 }  // namespace vts
 }  // namespace V2_4
diff --git a/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_TargetTest.cpp b/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_TargetTest.cpp
index 047109e..93b646f 100644
--- a/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_TargetTest.cpp
+++ b/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_TargetTest.cpp
@@ -2122,6 +2122,41 @@
     EXPECT_TRUE(mComposerClient->setPowerMode(getPrimaryDisplayId(), PowerMode::OFF).isOk());
 }
 
+/*
+ * Test that no two display configs are exactly the same.
+ */
+TEST_P(GraphicsComposerAidlTest, GetDisplayConfigNoRepetitions) {
+    for (const auto& display : mDisplays) {
+        const auto& [status, configs] = mComposerClient->getDisplayConfigs(display.getDisplayId());
+        for (std::vector<int>::size_type i = 0; i < configs.size(); i++) {
+            for (std::vector<int>::size_type j = i + 1; j < configs.size(); j++) {
+                const auto& [widthStatus1, width1] = mComposerClient->getDisplayAttribute(
+                        display.getDisplayId(), configs[i], DisplayAttribute::WIDTH);
+                const auto& [heightStatus1, height1] = mComposerClient->getDisplayAttribute(
+                        display.getDisplayId(), configs[i], DisplayAttribute::HEIGHT);
+                const auto& [vsyncPeriodStatus1, vsyncPeriod1] =
+                        mComposerClient->getDisplayAttribute(display.getDisplayId(), configs[i],
+                                                             DisplayAttribute::VSYNC_PERIOD);
+                const auto& [groupStatus1, group1] = mComposerClient->getDisplayAttribute(
+                        display.getDisplayId(), configs[i], DisplayAttribute::CONFIG_GROUP);
+
+                const auto& [widthStatus2, width2] = mComposerClient->getDisplayAttribute(
+                        display.getDisplayId(), configs[j], DisplayAttribute::WIDTH);
+                const auto& [heightStatus2, height2] = mComposerClient->getDisplayAttribute(
+                        display.getDisplayId(), configs[j], DisplayAttribute::HEIGHT);
+                const auto& [vsyncPeriodStatus2, vsyncPeriod2] =
+                        mComposerClient->getDisplayAttribute(display.getDisplayId(), configs[j],
+                                                             DisplayAttribute::VSYNC_PERIOD);
+                const auto& [groupStatus2, group2] = mComposerClient->getDisplayAttribute(
+                        display.getDisplayId(), configs[j], DisplayAttribute::CONFIG_GROUP);
+
+                ASSERT_FALSE(width1 == width2 && height1 == height2 &&
+                             vsyncPeriod1 == vsyncPeriod2 && group1 == group2);
+            }
+        }
+    }
+}
+
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(GraphicsComposerAidlCommandTest);
 INSTANTIATE_TEST_SUITE_P(
         PerInstance, GraphicsComposerAidlCommandTest,
diff --git a/health/aidl/Android.bp b/health/aidl/Android.bp
index f0cd33f..a4d4ace 100644
--- a/health/aidl/Android.bp
+++ b/health/aidl/Android.bp
@@ -36,11 +36,6 @@
             enabled: true,
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/health/aidl/default/Android.bp b/health/aidl/default/Android.bp
index 8eab997..0d426da 100644
--- a/health/aidl/default/Android.bp
+++ b/health/aidl/default/Android.bp
@@ -159,3 +159,70 @@
     init_rc: ["android.hardware.health-service.example_recovery.rc"],
     overrides: ["charger.recovery"],
 }
+
+// AIDL Fuzz version of libhealth2impl.
+cc_library_static {
+    name: "fuzz_libhealth_aidl_impl",
+    defaults: [
+        "libhealth_aidl_common_defaults",
+        "libhealth_aidl_charger_defaults",
+    ],
+    recovery_available: true,
+    export_include_dirs: ["include"],
+    export_static_lib_headers: [
+        "libbatterymonitor",
+    ],
+    srcs: [
+        "ChargerUtils.cpp",
+        "health-convert.cpp",
+        "HalHealthLoop.cpp",
+        "Health.cpp",
+        "LinkedCallback.cpp",
+    ],
+    target: {
+        recovery: {
+            exclude_srcs: [
+                "ChargerUtils.cpp",
+            ],
+        },
+    },
+}
+
+cc_fuzz {
+    name: "android.hardware.health-service.aidl_fuzzer",
+    defaults: [
+        "libhealth_aidl_impl_user",
+    ],
+    static_libs: [
+        "android.hardware.health-V1-ndk",
+        "libbase",
+        "libbinder_random_parcel",
+        "libcutils",
+        "liblog",
+        "libutils",
+        "fuzz_libhealth_aidl_impl",
+    ],
+    target: {
+        android: {
+            shared_libs: [
+                "libbinder_ndk",
+                "libbinder",
+            ],
+        },
+        host: {
+            static_libs: [
+                "libbinder_ndk",
+                "libbinder",
+            ],
+        },
+        darwin: {
+            enabled: false,
+        },
+    },
+    srcs: ["fuzzer.cpp"],
+    fuzz_config: {
+        cc: [
+            "hamzeh@google.com",
+        ],
+    },
+}
diff --git a/health/aidl/default/fuzzer.cpp b/health/aidl/default/fuzzer.cpp
new file mode 100644
index 0000000..b7c6d39
--- /dev/null
+++ b/health/aidl/default/fuzzer.cpp
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <fuzzbinder/libbinder_ndk_driver.h>
+#include <fuzzer/FuzzedDataProvider.h>
+
+#include <android-base/logging.h>
+#include <android/binder_interface_utils.h>
+#include <health-impl/Health.h>
+#include <health/utils.h>
+
+using aidl::android::hardware::health::Health;
+using android::fuzzService;
+using ndk::SharedRefBase;
+
+extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
+    auto config = std::make_unique<healthd_config>();
+    ::android::hardware::health::InitHealthdConfig(config.get());
+    auto binder = ndk::SharedRefBase::make<Health>("default", std::move(config));
+
+    fuzzService(binder->asBinder().get(), FuzzedDataProvider(data, size));
+
+    return 0;
+}
\ No newline at end of file
diff --git a/health/storage/aidl/Android.bp b/health/storage/aidl/Android.bp
index 4cd9263..c614efb 100644
--- a/health/storage/aidl/Android.bp
+++ b/health/storage/aidl/Android.bp
@@ -33,11 +33,6 @@
         java: {
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: ["1"],
 }
diff --git a/identity/aidl/Android.bp b/identity/aidl/Android.bp
index 920a4b9..f6855e8 100644
--- a/identity/aidl/Android.bp
+++ b/identity/aidl/Android.bp
@@ -23,9 +23,6 @@
             platform_apis: true,
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
             apps_enabled: false,
         },
     },
diff --git a/identity/aidl/vts/AndroidTest.xml b/identity/aidl/vts/AndroidTest.xml
new file mode 100644
index 0000000..67132b0
--- /dev/null
+++ b/identity/aidl/vts/AndroidTest.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalIdentityTargetTest.">
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer">
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push"
+                value="VtsHalIdentityTargetTest->/data/local/tmp/VtsHalIdentityTargetTest" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalIdentityTargetTest" />
+        <option name="native-test-timeout" value="300000"/>
+    </test>
+</configuration>
diff --git a/ir/aidl/Android.bp b/ir/aidl/Android.bp
index 2485f5b..25f6c8f 100644
--- a/ir/aidl/Android.bp
+++ b/ir/aidl/Android.bp
@@ -33,11 +33,6 @@
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/keymaster/aidl/Android.bp b/keymaster/aidl/Android.bp
index c4b6740..0fb6e4c 100644
--- a/keymaster/aidl/Android.bp
+++ b/keymaster/aidl/Android.bp
@@ -18,11 +18,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: [
         "1",
diff --git a/light/aidl/Android.bp b/light/aidl/Android.bp
index 6f478d7..c11934f 100644
--- a/light/aidl/Android.bp
+++ b/light/aidl/Android.bp
@@ -18,11 +18,6 @@
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/neuralnetworks/1.0/vts/functional/Android.bp b/neuralnetworks/1.0/vts/functional/Android.bp
index 29b31d2..a41f37f 100644
--- a/neuralnetworks/1.0/vts/functional/Android.bp
+++ b/neuralnetworks/1.0/vts/functional/Android.bp
@@ -90,7 +90,6 @@
         "libneuralnetworks_headers",
     ],
     test_suites: [
-        "general-tests",
         "vts",
     ],
 }
diff --git a/neuralnetworks/1.1/vts/functional/Android.bp b/neuralnetworks/1.1/vts/functional/Android.bp
index e9d4b76..7c1c118 100644
--- a/neuralnetworks/1.1/vts/functional/Android.bp
+++ b/neuralnetworks/1.1/vts/functional/Android.bp
@@ -58,7 +58,6 @@
         "libneuralnetworks_headers",
     ],
     test_suites: [
-        "general-tests",
         "vts",
     ],
 }
diff --git a/neuralnetworks/1.2/vts/functional/Android.bp b/neuralnetworks/1.2/vts/functional/Android.bp
index 2177924..7e4b5bb 100644
--- a/neuralnetworks/1.2/vts/functional/Android.bp
+++ b/neuralnetworks/1.2/vts/functional/Android.bp
@@ -85,7 +85,6 @@
         "libneuralnetworks_headers",
     ],
     test_suites: [
-        "general-tests",
         "vts",
     ],
 }
diff --git a/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp b/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp
index 3d783d9..fe38e61 100644
--- a/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp
+++ b/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp
@@ -1262,7 +1262,7 @@
         FILE* pFile = fopen(filename.c_str(), "a");
         uint32_t appendLength = getRandomInt(1, 256);
         for (uint32_t i = 0; i < appendLength; i++) {
-            ASSERT_NE(fputc(getRandomInt<uint8_t>(0, 255), pFile), EOF);
+            ASSERT_NE(fputc(getRandomInt<uint16_t>(0, 255), pFile), EOF);
         }
         fclose(pFile);
         *skip = false;
diff --git a/neuralnetworks/1.3/vts/functional/Android.bp b/neuralnetworks/1.3/vts/functional/Android.bp
index 9fa0f0a..07071cc 100644
--- a/neuralnetworks/1.3/vts/functional/Android.bp
+++ b/neuralnetworks/1.3/vts/functional/Android.bp
@@ -92,7 +92,6 @@
         "libneuralnetworks_headers",
     ],
     test_suites: [
-        "general-tests",
         "vts",
     ],
 }
diff --git a/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp b/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp
index a2013ec..f2cfa3f 100644
--- a/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp
+++ b/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp
@@ -1253,7 +1253,7 @@
         FILE* pFile = fopen(filename.c_str(), "a");
         uint32_t appendLength = getRandomInt(1, 256);
         for (uint32_t i = 0; i < appendLength; i++) {
-            ASSERT_NE(fputc(getRandomInt<uint8_t>(0, 255), pFile), EOF);
+            ASSERT_NE(fputc(getRandomInt<uint16_t>(0, 255), pFile), EOF);
         }
         fclose(pFile);
         *skip = false;
diff --git a/neuralnetworks/TEST_MAPPING b/neuralnetworks/TEST_MAPPING
index d296828..3218206 100644
--- a/neuralnetworks/TEST_MAPPING
+++ b/neuralnetworks/TEST_MAPPING
@@ -17,54 +17,10 @@
     },
     {
       "name": "neuralnetworks_utils_hal_aidl_test"
-    },
-    {
-      "name": "VtsHalNeuralnetworksV1_0TargetTest",
-      "options": [
-        {
-          // Do not use any sample driver except sample-all in order to reduce
-          // testing time. The other sample drivers (fast-float, quant, etc.)
-          // are subsets of sample-all.
-          "include-filter": "-*sample_float_fast*:*sample_float_slow*:*sample_minimal*:*sample_quant*"
-        }
-      ]
-    },
-    {
-      "name": "VtsHalNeuralnetworksV1_1TargetTest",
-      "options": [
-        {
-          // Do not use any sample driver except sample-all in order to reduce
-          // testing time. The other sample drivers (fast-float, quant, etc.)
-          // are subsets of sample-all.
-          "include-filter": "-*sample_float_fast*:*sample_float_slow*:*sample_minimal*:*sample_quant*"
-        }
-      ]
     }
   ],
   "presubmit-large": [
     {
-      "name": "VtsHalNeuralnetworksV1_2TargetTest",
-      "options": [
-        {
-          // Do not use any sample driver except sample-all in order to reduce
-          // testing time. The other sample drivers (fast-float, quant, etc.)
-          // are subsets of sample-all.
-          "include-filter": "-*sample_float_fast*:*sample_float_slow*:*sample_minimal*:*sample_quant*"
-        }
-      ]
-    },
-    {
-      "name": "VtsHalNeuralnetworksV1_3TargetTest",
-      "options": [
-        {
-          // Do not use any sample driver except sample-all in order to reduce
-          // testing time. The other sample drivers (fast-float, quant, etc.)
-          // are subsets of sample-all.
-          "include-filter": "-*sample_float_fast*:*sample_float_slow*:*sample_minimal*:*sample_quant*"
-        }
-      ]
-    },
-    {
       "name": "VtsHalNeuralnetworksTargetTest",
       "options": [
         {
diff --git a/neuralnetworks/aidl/vts/functional/CompilationCachingTests.cpp b/neuralnetworks/aidl/vts/functional/CompilationCachingTests.cpp
index 7451f7e..da0fe64 100644
--- a/neuralnetworks/aidl/vts/functional/CompilationCachingTests.cpp
+++ b/neuralnetworks/aidl/vts/functional/CompilationCachingTests.cpp
@@ -1068,7 +1068,7 @@
         FILE* pFile = fopen(filename.c_str(), "a");
         uint32_t appendLength = getRandomInt(1, 256);
         for (uint32_t i = 0; i < appendLength; i++) {
-            ASSERT_NE(fputc(getRandomInt<uint8_t>(0, 255), pFile), EOF);
+            ASSERT_NE(fputc(getRandomInt<uint16_t>(0, 255), pFile), EOF);
         }
         fclose(pFile);
         *skip = false;
diff --git a/nfc/aidl/Android.bp b/nfc/aidl/Android.bp
index b9578f4..09a45d1 100644
--- a/nfc/aidl/Android.bp
+++ b/nfc/aidl/Android.bp
@@ -34,11 +34,6 @@
             sdk_version: "module_current",
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/oemlock/aidl/Android.bp b/oemlock/aidl/Android.bp
index d1930f9..1c19bb1 100644
--- a/oemlock/aidl/Android.bp
+++ b/oemlock/aidl/Android.bp
@@ -16,11 +16,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: ["1"],
 }
diff --git a/power/aidl/Android.bp b/power/aidl/Android.bp
index e4708f8..70b1203 100644
--- a/power/aidl/Android.bp
+++ b/power/aidl/Android.bp
@@ -35,11 +35,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/power/stats/aidl/Android.bp b/power/stats/aidl/Android.bp
index 48d3c51..b1b2515 100644
--- a/power/stats/aidl/Android.bp
+++ b/power/stats/aidl/Android.bp
@@ -32,11 +32,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
         cpp: {
             enabled: true,
         },
diff --git a/radio/aidl/Android.bp b/radio/aidl/Android.bp
index 72f160d..c0609d8 100644
--- a/radio/aidl/Android.bp
+++ b/radio/aidl/Android.bp
@@ -15,16 +15,11 @@
     stability: "vintf",
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
@@ -44,16 +39,11 @@
     imports: ["android.hardware.radio"],
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
@@ -73,16 +63,11 @@
     imports: ["android.hardware.radio"],
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
@@ -102,16 +87,11 @@
     imports: ["android.hardware.radio"],
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
@@ -131,16 +111,11 @@
     imports: ["android.hardware.radio"],
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
@@ -160,16 +135,11 @@
     imports: ["android.hardware.radio"],
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
@@ -192,16 +162,11 @@
     ],
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
@@ -224,16 +189,11 @@
     imports: ["android.hardware.radio"],
     backend: {
         cpp: {
-            enabled: false,
+            enabled: true,
         },
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyMode.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyMode.aidl
new file mode 100644
index 0000000..071e6b5
--- /dev/null
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyMode.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.radio.network;
+@Backing(type="int") @JavaDerive(toString=true) @VintfStability
+enum EmergencyMode {
+  EMERGENCY_WWAN = 1,
+  EMERGENCY_WLAN = 2,
+  EMERGENCY_CALLBACK = 3,
+}
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyNetworkScanTrigger.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyNetworkScanTrigger.aidl
new file mode 100644
index 0000000..2797aff
--- /dev/null
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyNetworkScanTrigger.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.radio.network;
+@JavaDerive(toString=true) @VintfStability
+parcelable EmergencyNetworkScanTrigger {
+  android.hardware.radio.AccessNetwork[] accessNetwork;
+  android.hardware.radio.network.EmergencyScanType scanType;
+}
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyRegResult.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyRegResult.aidl
new file mode 100644
index 0000000..cb598f3
--- /dev/null
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyRegResult.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.radio.network;
+@JavaDerive(toString=true) @VintfStability
+parcelable EmergencyRegResult {
+  android.hardware.radio.AccessNetwork accessNetwork;
+  android.hardware.radio.network.RegState regState;
+  android.hardware.radio.network.Domain emcDomain;
+  boolean isEmcBearerSupported;
+  byte nwProvidedEmc;
+  byte nwProvidedEmf;
+}
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyScanType.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyScanType.aidl
new file mode 100644
index 0000000..5e86c76
--- /dev/null
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/EmergencyScanType.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.radio.network;
+@Backing(type="int") @JavaDerive(toString=true) @VintfStability
+enum EmergencyScanType {
+  NO_PREFERENCE = 0,
+  LIMITED_SERVICE = 1,
+  FULL_SERVICE = 2,
+}
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl
index 2b70e45..832738f 100644
--- a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl
@@ -70,4 +70,8 @@
   oneway void supplyNetworkDepersonalization(in int serial, in String netPin);
   oneway void setUsageSetting(in int serial, in android.hardware.radio.network.UsageSetting usageSetting);
   oneway void getUsageSetting(in int serial);
+  oneway void setEmergencyMode(int serial, in android.hardware.radio.network.EmergencyMode emcModeType);
+  oneway void triggerEmergencyNetworkScan(int serial, in android.hardware.radio.network.EmergencyNetworkScanTrigger request);
+  oneway void cancelEmergencyNetworkScan(in int serial);
+  oneway void exitEmergencyMode(in int serial);
 }
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkIndication.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkIndication.aidl
index bd03c51..0f017ea 100644
--- a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkIndication.aidl
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkIndication.aidl
@@ -48,4 +48,5 @@
   oneway void restrictedStateChanged(in android.hardware.radio.RadioIndicationType type, in android.hardware.radio.network.PhoneRestrictedState state);
   oneway void suppSvcNotify(in android.hardware.radio.RadioIndicationType type, in android.hardware.radio.network.SuppSvcNotification suppSvc);
   oneway void voiceRadioTechChanged(in android.hardware.radio.RadioIndicationType type, in android.hardware.radio.RadioTechnology rat);
+  oneway void emergencyNetworkScanResult(in android.hardware.radio.RadioIndicationType type, in android.hardware.radio.network.EmergencyRegResult result);
 }
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkResponse.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkResponse.aidl
index 5f6c736..24d587e 100644
--- a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkResponse.aidl
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetworkResponse.aidl
@@ -69,4 +69,8 @@
   oneway void supplyNetworkDepersonalizationResponse(in android.hardware.radio.RadioResponseInfo info, in int remainingRetries);
   oneway void setUsageSettingResponse(in android.hardware.radio.RadioResponseInfo info);
   oneway void getUsageSettingResponse(in android.hardware.radio.RadioResponseInfo info, in android.hardware.radio.network.UsageSetting usageSetting);
+  oneway void setEmergencyModeResponse(in android.hardware.radio.RadioResponseInfo info, in android.hardware.radio.network.EmergencyRegResult regState);
+  oneway void triggerEmergencyNetworkScanResponse(in android.hardware.radio.RadioResponseInfo info);
+  oneway void exitEmergencyModeResponse(in android.hardware.radio.RadioResponseInfo info);
+  oneway void cancelEmergencyNetworkScanResponse(in android.hardware.radio.RadioResponseInfo info);
 }
diff --git a/radio/aidl/android/hardware/radio/messaging/GsmSmsMessage.aidl b/radio/aidl/android/hardware/radio/messaging/GsmSmsMessage.aidl
index ee62d95..b256c9a 100644
--- a/radio/aidl/android/hardware/radio/messaging/GsmSmsMessage.aidl
+++ b/radio/aidl/android/hardware/radio/messaging/GsmSmsMessage.aidl
@@ -27,6 +27,7 @@
     /**
      * SMS in PDU format as an ASCII hex string less the SMSC address.
      * TP-Layer-Length is be "strlen(pdu)/2
+     * TP - MessageRef field of pdu must not be modified by modem
      */
     String pdu;
 }
diff --git a/radio/aidl/android/hardware/radio/network/EmergencyMode.aidl b/radio/aidl/android/hardware/radio/network/EmergencyMode.aidl
new file mode 100644
index 0000000..25031a9
--- /dev/null
+++ b/radio/aidl/android/hardware/radio/network/EmergencyMode.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.network;
+
+@VintfStability
+@Backing(type="int")
+@JavaDerive(toString=true)
+enum EmergencyMode {
+    /**
+     * Mode Type Emergency WWAN, indicates that the current domain selected for the Emergency call
+     * is cellular.
+     */
+    EMERGENCY_WWAN = 1,
+
+    /**
+     * Mode Type Emergency WLAN, indicates that the current domain selected for the Emergency call
+     * is WLAN/WIFI.
+     */
+    EMERGENCY_WLAN = 2,
+
+    /**
+     * Mode Type Emergency Callback, indicates that the current mode set request is for Emergency
+     * callback.
+     */
+    EMERGENCY_CALLBACK = 3,
+}
diff --git a/radio/aidl/android/hardware/radio/network/EmergencyNetworkScanTrigger.aidl b/radio/aidl/android/hardware/radio/network/EmergencyNetworkScanTrigger.aidl
new file mode 100644
index 0000000..0a22e4c
--- /dev/null
+++ b/radio/aidl/android/hardware/radio/network/EmergencyNetworkScanTrigger.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.network;
+import android.hardware.radio.AccessNetwork;
+import android.hardware.radio.network.EmergencyScanType;
+
+@VintfStability
+@JavaDerive(toString=true)
+parcelable EmergencyNetworkScanTrigger{
+    /**
+     * Access network to be prioritized during emergency scan. The 1st entry has the highest
+     * priority.
+     */
+    AccessNetwork[] accessNetwork;
+
+    /**
+     * Scan type indicates the type of scans to be performed i.e. limited scan, full service scan or
+     * any scan.
+     */
+    EmergencyScanType scanType;
+}
diff --git a/radio/aidl/android/hardware/radio/network/EmergencyRegResult.aidl b/radio/aidl/android/hardware/radio/network/EmergencyRegResult.aidl
new file mode 100644
index 0000000..cf5caa4
--- /dev/null
+++ b/radio/aidl/android/hardware/radio/network/EmergencyRegResult.aidl
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.network;
+import android.hardware.radio.AccessNetwork;
+import android.hardware.radio.network.RegState;
+import android.hardware.radio.network.Domain;
+
+@VintfStability
+@JavaDerive(toString=true)
+parcelable EmergencyRegResult {
+    /**
+     * Indicates the cellular access network of the current emergency capable system.
+     */
+    AccessNetwork accessNetwork;
+
+    /**
+     * Registration state of the current emergency capable system.
+     */
+    RegState regState;
+
+    /**
+     * EMC domain indicates the current domain of the acquired system.
+     */
+    Domain emcDomain;
+
+    /**
+     * This indicates if camped network support VoLTE emergency bearers.
+     * This should only be set if the UE is in LTE mode.
+     */
+    boolean isEmcBearerSupported;
+
+    /**
+     * The value of the network provided EMC 5G Registration ACCEPT.
+     * This should be set only if  the UE is in 5G mode.
+     */
+    byte nwProvidedEmc;
+
+    /**
+     * The value of the network provided EMF ( EPS Fallback) in 5G Registration ACCEPT.
+     * This should not be set if UE is not in 5G mode.
+     */
+    byte nwProvidedEmf;
+}
diff --git a/radio/aidl/android/hardware/radio/network/EmergencyScanType.aidl b/radio/aidl/android/hardware/radio/network/EmergencyScanType.aidl
new file mode 100644
index 0000000..72c5490
--- /dev/null
+++ b/radio/aidl/android/hardware/radio/network/EmergencyScanType.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.network;
+
+@VintfStability
+@Backing(type="int")
+@JavaDerive(toString=true)
+enum EmergencyScanType {
+    /**
+     * Scan Type No Preference, indicates that the modem can scan for emergency
+     * service as per modem’s implementation.
+     */
+    NO_PREFERENCE = 0,
+
+    /**
+     * Scan Type limited, indicates that the modem will scan for
+     * emergency service in limited service mode.
+     */
+    LIMITED_SERVICE = 1,
+
+    /**
+     * Scan Type Full Service, indicates that the modem will scan for
+     * emergency service in Full service mode.
+     */
+    FULL_SERVICE = 2,
+}
diff --git a/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl b/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl
index cce52ff..0ac8b0e 100644
--- a/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl
+++ b/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl
@@ -27,6 +27,8 @@
 import android.hardware.radio.network.RadioBandMode;
 import android.hardware.radio.network.SignalThresholdInfo;
 import android.hardware.radio.network.UsageSetting;
+import android.hardware.radio.network.EmergencyNetworkScanTrigger;
+import android.hardware.radio.network.EmergencyMode;
 
 /**
  * This interface is used by telephony and telecom to talk to cellular radio for network APIs.
@@ -437,4 +439,44 @@
      * @param serial Serial number of request.
      */
     oneway void getUsageSetting(in int serial);
+
+    /**
+     * Set the Emergency Mode
+     *
+     * @param serial Serial number of the request.
+     * @param emcModeType Defines the radio emergency mode type/radio network required/
+     * type of service to be scanned.
+     *
+     * Response function is IRadioEmergencyResponse.setEmergencyModeResponse()
+     */
+    void setEmergencyMode(int serial, in EmergencyMode emcModeType );
+
+    /**
+     * Triggers an Emergency network scan.
+     *
+     * @param serial Serial number of the request.
+     * @param request Defines the radio target networks/preferred network/
+     * Max Scan Time and type of service to be scanned.
+     *
+     * Response function is IRadioEmergencyResponse.triggerEmergencyNetworkScanResponse()
+     */
+    void triggerEmergencyNetworkScan( int serial, in EmergencyNetworkScanTrigger request);
+
+    /**
+     * Cancels ongoing Emergency network scan
+     *
+     * @param serial Serial number of the request.
+     *
+     * Response function is IRadioEmergencyResponse.cancelEmergencyNetworkScan()
+     */
+    void cancelEmergencyNetworkScan(in int serial);
+
+    /**
+     * Exits ongoing Emergency Mode
+     *
+     * @param serial Serial number of the request.
+     *
+     * Response function is IRadioEmergencyResponse.exitEmergencyModeResponse()
+     */
+    void exitEmergencyMode(in int serial);
 }
diff --git a/radio/aidl/android/hardware/radio/network/IRadioNetworkIndication.aidl b/radio/aidl/android/hardware/radio/network/IRadioNetworkIndication.aidl
index f471433..47d932d 100644
--- a/radio/aidl/android/hardware/radio/network/IRadioNetworkIndication.aidl
+++ b/radio/aidl/android/hardware/radio/network/IRadioNetworkIndication.aidl
@@ -27,6 +27,7 @@
 import android.hardware.radio.network.PhysicalChannelConfig;
 import android.hardware.radio.network.SignalStrength;
 import android.hardware.radio.network.SuppSvcNotification;
+import android.hardware.radio.network.EmergencyRegResult;
 
 /**
  * Interface declaring unsolicited radio indications for network APIs.
@@ -190,4 +191,12 @@
      * @param rat Current new voice rat
      */
     void voiceRadioTechChanged(in RadioIndicationType type, in RadioTechnology rat);
+
+    /**
+     * Emergency Scan Results.
+     *
+     * @param type Type of radio indication
+     * @param result the result of the Emergency Network Scan
+     */
+    void emergencyNetworkScanResult(in RadioIndicationType type, in EmergencyRegResult result);
 }
diff --git a/radio/aidl/android/hardware/radio/network/IRadioNetworkResponse.aidl b/radio/aidl/android/hardware/radio/network/IRadioNetworkResponse.aidl
index dcf0004..d98a31b 100644
--- a/radio/aidl/android/hardware/radio/network/IRadioNetworkResponse.aidl
+++ b/radio/aidl/android/hardware/radio/network/IRadioNetworkResponse.aidl
@@ -29,6 +29,7 @@
 import android.hardware.radio.network.RegStateResult;
 import android.hardware.radio.network.SignalStrength;
 import android.hardware.radio.network.UsageSetting;
+import android.hardware.radio.network.EmergencyRegResult;
 
 /**
  * Interface declaring response functions to solicited radio requests for network APIs.
@@ -572,4 +573,51 @@
      *   RadioError:SIM_ABSENT
      */
     oneway void getUsageSettingResponse(in RadioResponseInfo info, in UsageSetting usageSetting);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error.
+     * @param regState the current registration state of the modem.
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:MODEM_ERR
+     *   RadioError:INVALID_ARGUMENTS
+     */
+    void setEmergencyModeResponse(in RadioResponseInfo info, in EmergencyRegResult regState);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:MODEM_ERR
+     *   RadioError:INVALID_ARGUMENTS
+     */
+    void triggerEmergencyNetworkScanResponse(in RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:MODEM_ERR
+     */
+    void exitEmergencyModeResponse(in RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:MODEM_ERR
+     */
+    void cancelEmergencyNetworkScanResponse(in RadioResponseInfo info);
 }
diff --git a/rebootescrow/aidl/Android.bp b/rebootescrow/aidl/Android.bp
index c764f86..39aaa07 100644
--- a/rebootescrow/aidl/Android.bp
+++ b/rebootescrow/aidl/Android.bp
@@ -18,11 +18,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: ["1"],
 }
diff --git a/security/OWNERS b/security/OWNERS
index 54d820a..f061cd6 100644
--- a/security/OWNERS
+++ b/security/OWNERS
@@ -1,5 +1,7 @@
+# Please assign all bugs related to /hardware/interfaces/security to the team alias,
+# android-hardware-security@google.com.  This will get them auto-assigned to the on-call triage
+# engineer, ensuring quickest response.
 drysdale@google.com
 jbires@google.com
-jdanis@google.com
 seleneh@google.com
 swillden@google.com
diff --git a/security/dice/aidl/Android.bp b/security/dice/aidl/Android.bp
index 97781b3..5625d70 100644
--- a/security/dice/aidl/Android.bp
+++ b/security/dice/aidl/Android.bp
@@ -34,9 +34,6 @@
             platform_apis: false,
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
             apps_enabled: false,
             apex_available: [
                 "//apex_available:platform",
diff --git a/security/keymint/RKP_CHANGELOG.md b/security/keymint/RKP_CHANGELOG.md
new file mode 100644
index 0000000..67d68d4
--- /dev/null
+++ b/security/keymint/RKP_CHANGELOG.md
@@ -0,0 +1,18 @@
+# Remote Provisioning Changelog
+
+This document provides an exact description of which changes have occurred in the
+`IRemotelyProvisionedComponent` HAL interface in each Android release.
+
+## Releases
+* **Android S (12):** IRemotelyProvisionedComponent v1
+* **Android T (13):** IRemotelyProvisionedComponent v2
+
+## IRemotelyProvisionedComponent 1 -> 2
+* DeviceInfo
+ * Most entries are no longer optional.
+ * `att_id_state` is now `fused`. `fused` is used to indicate if SecureBoot is enabled.
+ * `version` is now `2`.
+ * `board` has been removed.
+ * `device` has been added.
+* RpcHardwareInfo
+ * `uniqueId` String added as a field in order to differentiate IRPC instances on device.
\ No newline at end of file
diff --git a/security/keymint/aidl/Android.bp b/security/keymint/aidl/Android.bp
index a233087..96d44a7 100644
--- a/security/keymint/aidl/Android.bp
+++ b/security/keymint/aidl/Android.bp
@@ -22,9 +22,6 @@
             platform_apis: true,
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
             apps_enabled: false,
         },
         rust: {
diff --git a/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl b/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl
index 95a3710..926d105 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/IKeyMintDevice.aidl
@@ -196,12 +196,12 @@
  * derive a key that is used to encrypt the private/secret key material.
  *
  * The root of trust consists of a bitstring that must be derived from the public key used by
- * Verified Boot to verify the signature on the boot image and from the lock state of the
- * device.  If the public key is changed to allow a different system image to be used or if the
- * lock state is changed, then all of the IKeyMintDevice-protected keys created by the previous
- * system state must be unusable, unless the previous state is restored.  The goal is to increase
- * the value of the software-enforced key access controls by making it impossible for an attacker-
- * installed operating system to use IKeyMintDevice keys.
+ * Verified Boot to verify the signature on the boot image, from the lock state and from the
+ * Verified Boot state of the device.  If the public key is changed to allow a different system
+ * image to be used or if the lock state is changed, then all of the IKeyMintDevice-protected keys
+ * created by the previous system state must be unusable, unless the previous state is restored.
+ * The goal is to increase the value of the software-enforced key access controls by making it
+ * impossible for an attacker-installed operating system to use IKeyMintDevice keys.
  *
  * == Version Binding ==
  *
@@ -336,6 +336,17 @@
      * Only Tag::KEY_SIZE is required to generate an 3DES key, and its value must be 168.  If
      * omitted, generateKey must return ErrorCode::UNSUPPORTED_KEY_SIZE.
      *
+     * == HMAC Keys ==
+     *
+     * Tag::KEY_SIZE must be provided to generate an HMAC key, and its value must be >= 64 and a
+     * multiple of 8.  All devices must support key sizes up to 512 bits, but StrongBox devices must
+     * not support key sizes larger than 512 bits.  If omitted or invalid, generateKey() must return
+     * ErrorCode::UNSUPPORTED_KEY_SIZE.
+     *
+     * Tag::MIN_MAC_LENGTH must be provided, and must be a multiple of 8 in the range 64 to 512
+     * bits (inclusive). If omitted, generateKey must return ErrorCode::MISSING_MIN_MAC_LENGTH; if
+     * invalid, generateKey must return ErrorCode::UNSUPPORTED_MIN_MAC_LENGTH.
+     *
      * @param keyParams Key generation parameters are defined as KeyMintDevice tag/value pairs,
      *        provided in params.  See above for detailed specifications of which tags are required
      *        for which types of keys.
@@ -661,19 +672,19 @@
      *   structure, because it cannot add the DigestInfo structure.  Instead, the IKeyMintDevice
      *   must construct 0x00 || 0x01 || PS || 0x00 || M, where M is the provided message and PS is a
      *   random padding string at least eight bytes in length.  The size of the RSA key has to be at
-     *   least 11 bytes larger than the message, otherwise begin() must return
+     *   least 11 bytes larger than the message, otherwise finish() must return
      *   ErrorCode::INVALID_INPUT_LENGTH.
      *
      * o PaddingMode::RSA_PKCS1_1_1_5_ENCRYPT padding does not require a digest.
      *
-     * o PaddingMode::RSA_PSS padding requires a digest, which must match one of the padding values
+     * o PaddingMode::RSA_PSS padding requires a digest, which must match one of the digest values
      *   in the key authorizations, and which may not be Digest::NONE.  begin() must return
      *   ErrorCode::INCOMPATIBLE_DIGEST if this is not the case.  In addition, the size of the RSA
-     *   key must be at least 2 + D bytes larger than the output size of the digest, where D is the
-     *   size of the digest, in bytes.  Otherwise begin() must return
-     *   ErrorCode::INCOMPATIBLE_DIGEST.  The salt size must be D.
+     *   key must be at least (D + S + 9) bits, where D is the size of the digest (in bits) and
+     *   S is the size of the salt (in bits).  The salt size S must equal D, so the RSA key must
+     *   be at least (2*D + 9) bits. Otherwise begin() must return ErrorCode::INCOMPATIBLE_DIGEST.
      *
-     * o PaddingMode::RSA_OAEP padding requires a digest, which must match one of the padding values
+     * o PaddingMode::RSA_OAEP padding requires a digest, which must match one of the digest values
      *   in the key authorizations, and which may not be Digest::NONE.  begin() must return
      *   ErrorCode::INCOMPATIBLE_DIGEST if this is not the case.  RSA_OAEP padding also requires an
      *   MGF1 digest, specified with Tag::RSA_OAEP_MGF_DIGEST, which must match one of the MGF1
@@ -683,9 +694,9 @@
      *
      * -- EC Keys --
      *
-     * Private key operations (KeyPurpose::SIGN) need authorization of digest and padding, which
-     * means that the key authorizations must contain the specified values.  If not, begin() must
-     * return ErrorCode::INCOMPATIBLE_DIGEST.
+     * Private key operations (KeyPurpose::SIGN) need authorization of digest, which means that the
+     * key authorizations must contain the specified values.  If not, begin() must return
+     * ErrorCode::INCOMPATIBLE_DIGEST.
      *
      * -- AES Keys --
      *
@@ -804,7 +815,7 @@
     /**
      * Called by client to notify the IKeyMintDevice that the device has left the early boot
      * state, and that keys with the EARLY_BOOT_ONLY tag may no longer be used.  All attempts to use
-     * an EARLY_BOOT_ONLY key after this method is called must fail with Error::INVALID_KEY_BLOB.
+     * an EARLY_BOOT_ONLY key after this method is called must fail with Error::EARLY_BOOT_ENDED.
      */
     void earlyBootEnded();
 
diff --git a/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl b/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl
index 57285a3..ae75579 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/KeyCreationResult.aidl
@@ -99,8 +99,7 @@
      * X.509 certificates ordered such that each certificate is signed by the subsequent one, up to
      * the root which must be self-signed (or contain a fake signature in the case of case 4 above).
      * The first certificate in the chain signs the public key info of the newly-generated or
-     * newly-imported key pair.  In the attestation cases (1 and 2 above), the first certificate
-     * must also satisfy some other requirements:
+     * newly-imported key pair.  The first certificate must also satisfy some other requirements:
      *
      * o It must have the serial number provided in Tag::CERTIFICATE_SERIAL, or default to 1 if the
      *   tag is not provided.
@@ -119,7 +118,8 @@
      *    - the keyAgreement bit set iff the attested key has KeyPurpose::AGREE_KEY, and
      *    - the keyCertSignBit set iff the attested key has KeyPurpose::ATTEST_KEY.
      *
-     * o it must contain a KeyDescription attestation extension with OID 1.3.6.1.4.1.11129.2.1.17.
+     * In the attestation cases (1 and 2 above), the first certificate must contain a
+     * KeyDescription attestation extension with OID 1.3.6.1.4.1.11129.2.1.17.
      *
      * The KeyDescription content is defined by the following ASN.1 schema, which is mostly a
      * straightforward translation of the KeyMint tag/value parameter lists to ASN.1.
diff --git a/security/keymint/aidl/android/hardware/security/keymint/KeyPurpose.aidl b/security/keymint/aidl/android/hardware/security/keymint/KeyPurpose.aidl
index fd103ef..32e71a7 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/KeyPurpose.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/KeyPurpose.aidl
@@ -23,7 +23,7 @@
 @VintfStability
 @Backing(type="int")
 enum KeyPurpose {
-    /* Usable with RSA, 3DES and AES keys. */
+    /* Usable with 3DES and AES keys. */
     ENCRYPT = 0,
 
     /* Usable with RSA, 3DES and AES keys. */
@@ -32,7 +32,7 @@
     /* Usable with RSA, EC and HMAC keys. */
     SIGN = 2,
 
-    /* Usable with RSA, EC and HMAC keys. */
+    /* Usable with HMAC keys. */
     VERIFY = 3,
 
     /* 4 is reserved */
diff --git a/security/keymint/aidl/android/hardware/security/keymint/PaddingMode.aidl b/security/keymint/aidl/android/hardware/security/keymint/PaddingMode.aidl
index e71a9c9..6ff4b29 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/PaddingMode.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/PaddingMode.aidl
@@ -26,7 +26,7 @@
 @VintfStability
 @Backing(type="int")
 enum PaddingMode {
-    NONE = 1, /* deprecated */
+    NONE = 1,
     RSA_OAEP = 2,
     RSA_PSS = 3,
     RSA_PKCS1_1_5_ENCRYPT = 4,
diff --git a/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl b/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
index b28ebcb..871a1ac 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
@@ -186,10 +186,16 @@
      * Tag::RSA_OAEP_MGF_DIGEST specifies the MGF1 digest algorithms that may be used with RSA
      * encryption/decryption with OAEP padding.  Possible values are defined by the Digest enum.
      *
-     * This tag is repeatable for key generation/import.  RSA cipher operations with OAEP padding
-     * must specify an MGF1 digest in the params argument of begin(). If this tag is missing or the
-     * specified digest is not in the MGF1 digests associated with the key then begin operation must
-     * fail with ErrorCode::INCOMPATIBLE_MGF_DIGEST.
+     * This tag is repeatable for key generation/import.
+     *
+     * If the caller specifies an MGF1 digest in the params argument of begin(), that digest must be
+     * present as an RSA_OAEP_MGF_DIGEST value in the key characteristics (or the begin() operation
+     * must fail with ErrorCode::INCOMPATIBLE_MGF_DIGEST).
+     *
+     * If the caller does not specify an MGF1 digest in the params argument of begin(), a default
+     * MGF1 digest of SHA1 is used.  If the key characteristics have any explicitly specified values
+     * for RSA_OAEP_MGF_DIGEST, then SHA1 must be included (or the begin() operation must fail with
+     * ErrorCode::INCOMPATIBLE_MGF_DIGEST).
      *
      * Must be hardware-enforced.
      */
@@ -504,7 +510,9 @@
      * that is necessary during all uses of the key.  In particular, calls to exportKey() and
      * getKeyCharacteristics() must provide the same value to the clientId parameter, and calls to
      * begin() must provide this tag and the same associated data as part of the inParams set.  If
-     * the correct data is not provided, the method must return ErrorCode::INVALID_KEY_BLOB.
+     * the correct data is not provided, the method must return ErrorCode::INVALID_KEY_BLOB.  Note
+     * that a key with a zero-length APPLICATION_ID cannot have its key characteristics retrieved
+     * using getKeyCharacteristics() due to a historical limitation of the API.
      *
      * The content of this tag must be bound to the key cryptographically, meaning it must not be
      * possible for an adversary who has access to all of the secure world secrets but does not have
@@ -525,7 +533,9 @@
      * that is necessary during all uses of the key.  In particular, calls to begin() and
      * exportKey() must provide the same value to the appData parameter, and calls to begin must
      * provide this tag and the same associated data as part of the inParams set.  If the correct
-     * data is not provided, the method must return ErrorCode::INVALID_KEY_BLOB.
+     * data is not provided, the method must return ErrorCode::INVALID_KEY_BLOB.  Note that a key
+     * with a zero-length APPLICATION_DATA cannot have its key characteristics retrieved using
+     * getKeyCharacteristics() due to a historical limitation of the API.
      *
      * The content of this tag must be bound to the key cryptographically, meaning it must not be
      * possible for an adversary who has access to all of the secure world secrets but does not have
diff --git a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
index 46db4f0..1caf8bc 100644
--- a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.cpp
@@ -772,6 +772,100 @@
     }
 }
 
+void KeyMintAidlTestBase::AesCheckEncryptOneByteAtATime(const string& key, BlockMode block_mode,
+                                                        PaddingMode padding_mode, const string& iv,
+                                                        const string& plaintext,
+                                                        const string& exp_cipher_text) {
+    bool is_authenticated_cipher = (block_mode == BlockMode::GCM);
+    auto auth_set = AuthorizationSetBuilder()
+                            .Authorization(TAG_NO_AUTH_REQUIRED)
+                            .AesEncryptionKey(key.size() * 8)
+                            .BlockMode(block_mode)
+                            .Padding(padding_mode);
+    if (iv.size() > 0) auth_set.Authorization(TAG_CALLER_NONCE);
+    if (is_authenticated_cipher) auth_set.Authorization(TAG_MIN_MAC_LENGTH, 128);
+    ASSERT_EQ(ErrorCode::OK, ImportKey(auth_set, KeyFormat::RAW, key));
+
+    CheckEncryptOneByteAtATime(block_mode, 16 /*block_size*/, padding_mode, iv, plaintext,
+                               exp_cipher_text);
+}
+
+void KeyMintAidlTestBase::CheckEncryptOneByteAtATime(BlockMode block_mode, const int block_size,
+                                                     PaddingMode padding_mode, const string& iv,
+                                                     const string& plaintext,
+                                                     const string& exp_cipher_text) {
+    bool is_stream_cipher = (block_mode == BlockMode::CTR || block_mode == BlockMode::GCM);
+    bool is_authenticated_cipher = (block_mode == BlockMode::GCM);
+    auto params = AuthorizationSetBuilder().BlockMode(block_mode).Padding(padding_mode);
+    if (iv.size() > 0) params.Authorization(TAG_NONCE, iv.data(), iv.size());
+    if (is_authenticated_cipher) params.Authorization(TAG_MAC_LENGTH, 128);
+
+    AuthorizationSet output_params;
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &output_params));
+
+    string actual_ciphertext;
+    if (is_stream_cipher) {
+        // Assert that a 1 byte of output is produced for 1 byte of input.
+        // Every input byte produces an output byte.
+        for (int plaintext_index = 0; plaintext_index < plaintext.size(); plaintext_index++) {
+            string ciphertext;
+            EXPECT_EQ(ErrorCode::OK, Update(plaintext.substr(plaintext_index, 1), &ciphertext));
+            // Some StrongBox implementations cannot support 1:1 input:output lengths, so
+            // we relax this API restriction for them.
+            if (SecLevel() != SecurityLevel::STRONGBOX) {
+                EXPECT_EQ(1, ciphertext.size()) << "plaintext index: " << plaintext_index;
+            }
+            actual_ciphertext.append(ciphertext);
+        }
+        string ciphertext;
+        EXPECT_EQ(ErrorCode::OK, Finish(&ciphertext));
+        if (SecLevel() != SecurityLevel::STRONGBOX) {
+            string expected_final_output;
+            if (is_authenticated_cipher) {
+                expected_final_output = exp_cipher_text.substr(plaintext.size());
+            }
+            EXPECT_EQ(expected_final_output, ciphertext);
+        }
+        actual_ciphertext.append(ciphertext);
+    } else {
+        // Assert that a block of output is produced once a full block of input is provided.
+        // Every input block produces an output block.
+        bool compare_output = true;
+        string additional_information;
+        int vendor_api_level = property_get_int32("ro.vendor.api_level", 0);
+        if (SecLevel() == SecurityLevel::STRONGBOX) {
+            // This is known to be broken on older vendor implementations.
+            if (vendor_api_level < 33) {
+                compare_output = false;
+            } else {
+                additional_information = " (b/194134359) ";
+            }
+        }
+        for (int plaintext_index = 0; plaintext_index < plaintext.size(); plaintext_index++) {
+            string ciphertext;
+            EXPECT_EQ(ErrorCode::OK, Update(plaintext.substr(plaintext_index, 1), &ciphertext));
+            if (compare_output) {
+                if ((plaintext_index % block_size) == block_size - 1) {
+                    // Update is expected to have output a new block
+                    EXPECT_EQ(block_size, ciphertext.size())
+                            << "plaintext index: " << plaintext_index << additional_information;
+                } else {
+                    // Update is expected to have produced no output
+                    EXPECT_EQ(0, ciphertext.size())
+                            << "plaintext index: " << plaintext_index << additional_information;
+                }
+            }
+            actual_ciphertext.append(ciphertext);
+        }
+        string ciphertext;
+        EXPECT_EQ(ErrorCode::OK, Finish(&ciphertext));
+        actual_ciphertext.append(ciphertext);
+    }
+    // Regardless of how the completed ciphertext got accumulated, it should match the expected
+    // ciphertext.
+    EXPECT_EQ(exp_cipher_text, actual_ciphertext);
+}
+
 void KeyMintAidlTestBase::CheckHmacTestVector(const string& key, const string& message,
                                               Digest digest, const string& expected_mac) {
     SCOPED_TRACE("CheckHmacTestVector");
@@ -981,7 +1075,7 @@
 
     // Retrieve relevant tags.
     Digest digest = Digest::NONE;
-    Digest mgf_digest = Digest::NONE;
+    Digest mgf_digest = Digest::SHA1;
     PaddingMode padding = PaddingMode::NONE;
 
     auto digest_tag = params.GetTagValue(TAG_DIGEST);
diff --git a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
index 8f9df24..67e8b21 100644
--- a/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
+++ b/security/keymint/aidl/vts/functional/KeyMintAidlTestBase.h
@@ -188,6 +188,10 @@
 
     void CheckAesIncrementalEncryptOperation(BlockMode block_mode, int message_size);
 
+    void AesCheckEncryptOneByteAtATime(const string& key, BlockMode block_mode,
+                                       PaddingMode padding_mode, const string& iv,
+                                       const string& plaintext, const string& exp_cipher_text);
+
     void CheckHmacTestVector(const string& key, const string& message, Digest digest,
                              const string& expected_mac);
 
@@ -343,6 +347,11 @@
     string name_;
     string author_;
     long challenge_;
+
+  private:
+    void CheckEncryptOneByteAtATime(BlockMode block_mode, const int block_size,
+                                    PaddingMode padding_mode, const string& iv,
+                                    const string& plaintext, const string& exp_cipher_text);
 };
 
 // If the given property is available, add it to the tag set under the given tag ID.
diff --git a/security/keymint/aidl/vts/functional/KeyMintTest.cpp b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
index 4e746b2..fa7dccb 100644
--- a/security/keymint/aidl/vts/functional/KeyMintTest.cpp
+++ b/security/keymint/aidl/vts/functional/KeyMintTest.cpp
@@ -613,7 +613,7 @@
 class NewKeyGenerationTest : public KeyMintAidlTestBase {
   protected:
     void CheckBaseParams(const vector<KeyCharacteristics>& keyCharacteristics) {
-        AuthorizationSet auths = CheckCommonParams(keyCharacteristics);
+        AuthorizationSet auths = CheckCommonParams(keyCharacteristics, KeyOrigin::GENERATED);
         EXPECT_TRUE(auths.Contains(TAG_PURPOSE, KeyPurpose::SIGN));
 
         // Check that some unexpected tags/values are NOT present.
@@ -622,20 +622,21 @@
     }
 
     void CheckSymmetricParams(const vector<KeyCharacteristics>& keyCharacteristics) {
-        AuthorizationSet auths = CheckCommonParams(keyCharacteristics);
+        AuthorizationSet auths = CheckCommonParams(keyCharacteristics, KeyOrigin::GENERATED);
         EXPECT_TRUE(auths.Contains(TAG_PURPOSE, KeyPurpose::ENCRYPT));
         EXPECT_TRUE(auths.Contains(TAG_PURPOSE, KeyPurpose::DECRYPT));
 
         EXPECT_FALSE(auths.Contains(TAG_PURPOSE, KeyPurpose::SIGN));
     }
 
-    AuthorizationSet CheckCommonParams(const vector<KeyCharacteristics>& keyCharacteristics) {
+    AuthorizationSet CheckCommonParams(const vector<KeyCharacteristics>& keyCharacteristics,
+                                       const KeyOrigin expectedKeyOrigin) {
         // TODO(swillden): Distinguish which params should be in which auth list.
         AuthorizationSet auths;
         for (auto& entry : keyCharacteristics) {
             auths.push_back(AuthorizationSet(entry.authorizations));
         }
-        EXPECT_TRUE(auths.Contains(TAG_ORIGIN, KeyOrigin::GENERATED));
+        EXPECT_TRUE(auths.Contains(TAG_ORIGIN, expectedKeyOrigin));
 
         // Verify that App data, ROT and auth timeout are NOT included.
         EXPECT_FALSE(auths.Contains(TAG_ROOT_OF_TRUST));
@@ -1102,9 +1103,9 @@
                 << "Key size " << key_size << "missing";
         EXPECT_TRUE(crypto_params.Contains(TAG_RSA_PUBLIC_EXPONENT, 65537U));
 
+        ASSERT_GT(cert_chain_.size(), 0);
         verify_subject_and_serial(cert_chain_[0], serial_int, subject, false);
         EXPECT_TRUE(ChainSignaturesAreValid(cert_chain_));
-        ASSERT_GT(cert_chain_.size(), 0);
 
         AuthorizationSet hw_enforced = HwEnforcedAuthorizations(key_characteristics);
         AuthorizationSet sw_enforced = SwEnforcedAuthorizations(key_characteristics);
@@ -1178,6 +1179,7 @@
         EXPECT_FALSE(ChainSignaturesAreValid(cert_chain_));
 
         // The signature over the attested key should correspond to the P256 public key.
+        ASSERT_GT(cert_chain_.size(), 0);
         X509_Ptr key_cert(parse_cert_blob(cert_chain_[0].encodedCertificate));
         ASSERT_TRUE(key_cert.get());
         EVP_PKEY_Ptr signing_pubkey;
@@ -1265,9 +1267,9 @@
             << "Key size " << key_size << "missing";
     EXPECT_TRUE(crypto_params.Contains(TAG_RSA_PUBLIC_EXPONENT, 65537U));
 
+    ASSERT_GT(cert_chain_.size(), 0);
     verify_subject_and_serial(cert_chain_[0], serial_int, subject, false);
     EXPECT_TRUE(ChainSignaturesAreValid(cert_chain_));
-    ASSERT_GT(cert_chain_.size(), 0);
 
     AuthorizationSet hw_enforced = HwEnforcedAuthorizations(key_characteristics);
     AuthorizationSet sw_enforced = SwEnforcedAuthorizations(key_characteristics);
@@ -1317,9 +1319,9 @@
                 << "Key size " << key_size << "missing";
         EXPECT_TRUE(crypto_params.Contains(TAG_RSA_PUBLIC_EXPONENT, 65537U));
 
+        ASSERT_EQ(cert_chain_.size(), 1);
         verify_subject_and_serial(cert_chain_[0], serial_int, subject, false);
         EXPECT_TRUE(ChainSignaturesAreValid(cert_chain_));
-        ASSERT_EQ(cert_chain_.size(), 1);
 
         CheckedDeleteKey(&key_blob);
     }
@@ -1398,6 +1400,7 @@
             << "Key size " << key_size << "missing";
     EXPECT_TRUE(crypto_params.Contains(TAG_RSA_PUBLIC_EXPONENT, 65537U));
 
+    ASSERT_GT(cert_chain_.size(), 0);
     verify_subject_and_serial(cert_chain_[0], serial_int, subject, false);
     EXPECT_TRUE(ChainSignaturesAreValid(cert_chain_));
     ASSERT_EQ(cert_chain_.size(), 1);
@@ -2228,8 +2231,8 @@
         EXPECT_TRUE(crypto_params.Contains(TAG_EC_CURVE, curve)) << "Curve " << curve << "missing";
 
         EXPECT_TRUE(ChainSignaturesAreValid(cert_chain_));
-        verify_subject_and_serial(cert_chain_[0], serial_int, subject, false);
         ASSERT_EQ(cert_chain_.size(), 1);
+        verify_subject_and_serial(cert_chain_[0], serial_int, subject, false);
 
         AuthorizationSet hw_enforced = HwEnforcedAuthorizations(key_characteristics);
         AuthorizationSet sw_enforced = SwEnforcedAuthorizations(key_characteristics);
@@ -2448,6 +2451,29 @@
 }
 
 /*
+ * NewKeyGenerationTest.EcdsaMissingCurve
+ *
+ * Verifies that EC key generation fails if EC_CURVE not specified after KeyMint V2.
+ */
+TEST_P(NewKeyGenerationTest, EcdsaMissingCurve) {
+    if (AidlVersion() < 2) {
+        /*
+         * The KeyMint V1 spec required that EC_CURVE be specified for EC keys.
+         * However, this was not checked at the time so we can only be strict about checking this
+         * for implementations of KeyMint version 2 and above.
+         */
+        GTEST_SKIP() << "Requiring EC_CURVE only strict since KeyMint v2";
+    }
+    /* If EC_CURVE not provided, generateKey
+     * must return ErrorCode::UNSUPPORTED_KEY_SIZE or ErrorCode::UNSUPPORTED_EC_CURVE.
+     */
+    auto result = GenerateKey(
+            AuthorizationSetBuilder().EcdsaKey(256).Digest(Digest::NONE).SetDefaultValidity());
+    ASSERT_TRUE(result == ErrorCode::UNSUPPORTED_KEY_SIZE ||
+                result == ErrorCode::UNSUPPORTED_EC_CURVE);
+}
+
+/*
  * NewKeyGenerationTest.EcdsaMismatchKeySize
  *
  * Verifies that specifying mismatched key size and curve for EC key generation returns
@@ -3776,7 +3802,7 @@
 // TODO(seleneh) add ExportKey to GenerateKey
 // check result
 
-class ImportKeyTest : public KeyMintAidlTestBase {
+class ImportKeyTest : public NewKeyGenerationTest {
   public:
     template <TagType tag_type, Tag tag, typename ValueT>
     void CheckCryptoParam(TypedTag<tag_type, tag> ttag, ValueT expected) {
@@ -4486,6 +4512,65 @@
     VerifyMessage(message, signature, AuthorizationSetBuilder().Digest(Digest::SHA_2_256));
 }
 
+/*
+ * ImportKeyTest.GetKeyCharacteristics
+ *
+ * Verifies that imported keys have the correct characteristics.
+ */
+TEST_P(ImportKeyTest, GetKeyCharacteristics) {
+    vector<uint8_t> key_blob;
+    vector<KeyCharacteristics> key_characteristics;
+    auto base_builder = AuthorizationSetBuilder()
+                                .Padding(PaddingMode::NONE)
+                                .Authorization(TAG_NO_AUTH_REQUIRED)
+                                .SetDefaultValidity();
+    vector<Algorithm> algorithms = {Algorithm::RSA, Algorithm::EC, Algorithm::HMAC, Algorithm::AES,
+                                    Algorithm::TRIPLE_DES};
+    ErrorCode result;
+    string symKey = hex2str("a49d7564199e97cb529d2c9d97bf2f98");                   // 128 bits
+    string tdesKey = hex2str("a49d7564199e97cb529d2c9d97bf2f98d35edf57ba1f7358");  // 192 bits
+    for (auto alg : algorithms) {
+        SCOPED_TRACE(testing::Message() << "Algorithm-" << alg);
+        AuthorizationSetBuilder builder(base_builder);
+        switch (alg) {
+            case Algorithm::RSA:
+                builder.RsaSigningKey(2048, 65537).Digest(Digest::NONE);
+
+                result = ImportKey(builder, KeyFormat::PKCS8, rsa_2048_key, &key_blob,
+                                   &key_characteristics);
+                break;
+            case Algorithm::EC:
+                builder.EcdsaSigningKey(EcCurve::P_256).Digest(Digest::NONE);
+                result = ImportKey(builder, KeyFormat::PKCS8, ec_256_key, &key_blob,
+                                   &key_characteristics);
+                break;
+            case Algorithm::HMAC:
+                builder.HmacKey(128)
+                        .Digest(Digest::SHA_2_256)
+                        .Authorization(TAG_MIN_MAC_LENGTH, 128);
+                result =
+                        ImportKey(builder, KeyFormat::RAW, symKey, &key_blob, &key_characteristics);
+                break;
+            case Algorithm::AES:
+                builder.AesEncryptionKey(128).BlockMode(BlockMode::ECB);
+                result =
+                        ImportKey(builder, KeyFormat::RAW, symKey, &key_blob, &key_characteristics);
+                break;
+            case Algorithm::TRIPLE_DES:
+                builder.TripleDesEncryptionKey(168).BlockMode(BlockMode::ECB);
+                result = ImportKey(builder, KeyFormat::RAW, tdesKey, &key_blob,
+                                   &key_characteristics);
+                break;
+            default:
+                ADD_FAILURE() << "Invalid Algorithm " << uint32_t(alg);
+                continue;
+        }
+        ASSERT_EQ(ErrorCode::OK, result);
+        CheckCharacteristics(key_blob, key_characteristics);
+        CheckCommonParams(key_characteristics, KeyOrigin::IMPORTED);
+    }
+}
+
 INSTANTIATE_KEYMINT_AIDL_TEST(ImportKeyTest);
 
 auto wrapped_key = hex2str(
@@ -5084,6 +5169,79 @@
 }
 
 /*
+ * EncryptionOperationsTest.RsaOaepMGFDigestDefaultSuccess
+ *
+ * Verifies that RSA-OAEP decryption operations work when no MGF digest is
+ * specified, defaulting to SHA-1.
+ */
+TEST_P(EncryptionOperationsTest, RsaOaepMGFDigestDefaultSuccess) {
+    size_t key_size = 2048;
+    ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
+                                                 .Authorization(TAG_NO_AUTH_REQUIRED)
+                                                 .RsaEncryptionKey(key_size, 65537)
+                                                 .Padding(PaddingMode::RSA_OAEP)
+                                                 .Digest(Digest::SHA_2_256)
+                                                 .SetDefaultValidity()));
+
+    // Do local RSA encryption using the default MGF digest of SHA-1.
+    string message = "Hello";
+    auto params =
+            AuthorizationSetBuilder().Digest(Digest::SHA_2_256).Padding(PaddingMode::RSA_OAEP);
+    string ciphertext = LocalRsaEncryptMessage(message, params);
+    EXPECT_EQ(key_size / 8, ciphertext.size());
+
+    // Do KeyMint RSA decryption also using the default MGF digest of SHA-1.
+    string plaintext = DecryptMessage(ciphertext, params);
+    EXPECT_EQ(message, plaintext) << "RSA-OAEP failed with default digest";
+
+    // Decrypting corrupted ciphertext should fail.
+    size_t offset_to_corrupt = random() % ciphertext.size();
+    char corrupt_byte;
+    do {
+        corrupt_byte = static_cast<char>(random() % 256);
+    } while (corrupt_byte == ciphertext[offset_to_corrupt]);
+    ciphertext[offset_to_corrupt] = corrupt_byte;
+
+    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+    string result;
+    EXPECT_EQ(ErrorCode::UNKNOWN_ERROR, Finish(ciphertext, &result));
+    EXPECT_EQ(0U, result.size());
+}
+
+/*
+ * EncryptionOperationsTest.RsaOaepMGFDigestDefaultFail
+ *
+ * Verifies that RSA-OAEP decryption operations fail when no MGF digest is
+ * specified on begin (thus defaulting to SHA-1), but the key characteristics
+ * has an explicit set of values for MGF_DIGEST that do not contain SHA-1.
+ */
+TEST_P(EncryptionOperationsTest, RsaOaepMGFDigestDefaultFail) {
+    size_t key_size = 2048;
+    ASSERT_EQ(ErrorCode::OK,
+              GenerateKey(AuthorizationSetBuilder()
+                                  .Authorization(TAG_NO_AUTH_REQUIRED)
+                                  .Authorization(TAG_RSA_OAEP_MGF_DIGEST, Digest::SHA_2_256)
+                                  .RsaEncryptionKey(key_size, 65537)
+                                  .Padding(PaddingMode::RSA_OAEP)
+                                  .Digest(Digest::SHA_2_256)
+                                  .SetDefaultValidity()));
+
+    // Do local RSA encryption using the default MGF digest of SHA-1.
+    string message = "Hello";
+    auto params =
+            AuthorizationSetBuilder().Digest(Digest::SHA_2_256).Padding(PaddingMode::RSA_OAEP);
+    string ciphertext = LocalRsaEncryptMessage(message, params);
+    EXPECT_EQ(key_size / 8, ciphertext.size());
+
+    // begin() params do not include MGF_DIGEST, so a default of SHA1 is assumed.
+    // Key characteristics *do* include values for MGF_DIGEST, so the SHA1 value
+    // is checked against those values, and found absent.
+    auto result = Begin(KeyPurpose::DECRYPT, params);
+    EXPECT_TRUE(result == ErrorCode::UNSUPPORTED_MGF_DIGEST ||
+                result == ErrorCode::INCOMPATIBLE_MGF_DIGEST);
+}
+
+/*
  * EncryptionOperationsTest.RsaOaepWithMGFIncompatibleDigest
  *
  * Verifies that RSA-OAEP decryption operations fail in the correct way when asked to operate
@@ -5614,6 +5772,328 @@
     CheckAesIncrementalEncryptOperation(BlockMode::GCM, 240);
 }
 
+/*
+ * EncryptionOperationsTest.Aes128CBCNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CBC/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes128CBCNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("7E3D723C09A9852B24F584F9D916F6A8");
+    string kat_iv = hex2str("944AE274D983892EADE422274858A96A");
+    string kat_plaintext =
+            hex2str("044E15899A080AADEB6778F64323B64D2CBCBADB338DF93B9AC459D4F41029"
+                    "809FFF37081C22EF278F896AB213A2A631");
+    string kat_ciphertext =
+            hex2str("B419293FCBD686F2913D1CF947E510D42FAFEDE5593C98AFD6AEE272596A"
+                    "56FE42C22F2A5E3B6A02BA9D8D0DE1E9A810");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CBC, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes128CBCPKCS7PaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CBC/PKCS7Padding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes128CBCPKCS7PaddingOneByteAtATime) {
+    string kat_key = hex2str("F16E698472578E919D92806262C5169F");
+    string kat_iv = hex2str("EF743540F8421ACA128A3247521F3E7D");
+    string kat_plaintext =
+            hex2str("5BEBF33569D90BF5E853814E12E7C7AA5758013F755773E29F4A25EC26EEB7"
+                    "65F7F2DC251F7DC62AEFCA1E8A5A11A1DCD44F0BD8FB593A5AE3");
+    string kat_ciphertext =
+            hex2str("3197CF6DB9466188B5FED375329324EE7D6092A8C0E41DFAF49E3724271427"
+                    "896D56A6243C0D59D6639722AF93CD53449BDDABF9C5F153EBDBFED9ED98C8CC37");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CBC, PaddingMode::PKCS7, kat_iv,
+                                  kat_plaintext, kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes128CTRNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CTR/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes128CTRNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("4713a7b2f93efe809b42ecc45213ef9f");
+    string kat_iv = hex2str("ebfa19b0ebf3d57feabd4c4bd04bea01");
+    string kat_plaintext =
+            hex2str("6d2c07e1fc86f99c6e2a8f6567828b4262a9c23d0f3ed8ab32482283c79796"
+                    "f0adba1bcd3736084996452a917fae98005aebe61f9e91c3");
+    string kat_ciphertext =
+            hex2str("345deb1d67b95e600e05cad4c32ec381aadb3e2c1ec7e0fb956dc38e6860cf"
+                    "0553535566e1b12fa9f87d29266ca26df427233df035df28");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CTR, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes128ECBNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/ECB/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes128ECBNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("7DA2467F068854B3CB36E5C333A16619");
+    string kat_plaintext =
+            hex2str("9A07C9575AD9CE209DF9F3953965CEBE8208587C7AE575A1904BF25048946D"
+                    "7B6168A9A27BCE554BEA94EF26E6C742A0");
+    string kat_ciphertext =
+            hex2str("8C47E49420FC92AC4CA2C601BC3F8AC31D01B260B7B849F2B8EEDFFFED8F36"
+                    "C31CBDA0D22F95C9C2A48C347E8C77AC82");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::ECB, PaddingMode::NONE, "", kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes128ECBPKCS7PaddingOneByteAtATime
+ * Verifies input and output sizes of AES/ECB/PKCS7Padding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes128ECBPKCS7PaddingOneByteAtATime) {
+    string kat_key = hex2str("C3BE04BCCB3D99B85290F113FE7AF194");
+    string kat_plaintext =
+            hex2str("348C213FD8DF3F990C20C5ACBF07B34B6264AE245784A5A6176DBFB1C2E7DD"
+                    "27E52CC92B8EEE40614F05B507B355F6354A2705BD86");
+    string kat_ciphertext =
+            hex2str("07CD05C41FEDEDDC5DB4B3E35E676153184A119AA4DFDDC290616F1FA60093"
+                    "1DE6BEA9BDB90D1D733899946F8C8E5C0C4383F99F5D88E27F3EBC0C6E52759ED3");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::ECB, PaddingMode::PKCS7, "", kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes128GCMNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/GCM/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes128GCMNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("ba76354f0aed6e8d91f45c4ff5a062db");
+    string kat_iv = hex2str("b79437ae08ff355d7d8a4d0f");
+    string kat_plaintext =
+            hex2str("6d7596a8fd56ceaec61de7940984b7736fec44f572afc3c8952e4dc6541e2b"
+                    "c6a702c440a37610989543f63fedb047ca2173bc18581944");
+    string kat_ciphertext =
+            hex2str("b3f6799e8f9326f2df1e80fcd2cb16d78c9dc7cc14bb677862dc6c639b3a63"
+                    "38d24b312d3989e5920b5dbfc976765efbfe57bb385940a7a43bdf05bddae3c9d6a2fb"
+                    "bdfcc0cba0");
+
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::GCM, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes192CBCNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CBC/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes192CBCNoPaddingOneByteAtATime) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        GTEST_SKIP() << "Key size 192 is not supported by Strongbox.";
+    }
+    string kat_key = hex2str("be8cc4e25cce46e5d55725e2391f7d3cf59ed60062f5a43b");
+    string kat_iv = hex2str("80a199aab0eee77e7762ddf3b3a32f40");
+    string kat_plaintext =
+            hex2str("064f9200e0df37d4711af4a69d11addf9e1c345d9d8195f9f1f715019ce96a"
+                    "167f2497c994bd496eb80bfb2ba2c9d5af");
+    string kat_ciphertext =
+            hex2str("859b90becaa85e95a71e104efbd7a3b723bcbf4eb39865544a05d9e90b6fe5"
+                    "72c134552f3a138e726fbe493b3a839598");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CBC, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes192CBCPKCS7PaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CBC/PKCS7Padding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes192CBCPKCS7PaddingOneByteAtATime) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        GTEST_SKIP() << "Key size 192 is not supported by Strongbox.";
+    }
+    string kat_key = hex2str("68969215ec41e4df7d23de0e806f458f52aff492bd7c5263");
+    string kat_iv = hex2str("e61d13dfbf0533289f0e7950209da418");
+    string kat_plaintext =
+            hex2str("8d4c1cac27511ee2d82409a7f378e7e402b0eb189c1eaa5c506eb72a9074"
+                    "b170");
+    string kat_ciphertext =
+            hex2str("e70bcd62c595dc1b2b8c197bb91a7447e1be2cbcf3fdc69e7e991faf0f57cf"
+                    "4e3884138ff403a41fd99818708ada301c");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CBC, PaddingMode::PKCS7, kat_iv,
+                                  kat_plaintext, kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes192CTRNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CTR/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes192CTRNoPaddingOneByteAtATime) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        GTEST_SKIP() << "Key size 192 is not supported by Strongbox.";
+    }
+    string kat_key = hex2str("5e2036e790d38815c90beb67a1c9e5aa0e167ef082927317");
+    string kat_iv = hex2str("df0694959b89054156962d68a226965c");
+    string kat_plaintext =
+            hex2str("6ed2781c99e03e45314d6019932220c2c98130c53f9f67ad10ac519adf50e9"
+                    "28091e09cdbbd3b42b");
+    string kat_ciphertext =
+            hex2str("e427b6666502e05b82d0b20ae50e862b1936d71266fc49178ac984e71571f2"
+                    "2ae0f90f0c19f42b4a");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CTR, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes192ECBNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/ECB/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes192ECBNoPaddingOneByteAtATime) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        GTEST_SKIP() << "Key size 192 is not supported by Strongbox.";
+    }
+    string kat_key = hex2str("3cab83fb338ba985fbfe74c5e9d2e900adb570b1d67faf92");
+    string kat_plaintext =
+            hex2str("2cc64c335a13fb838f3c6aad0a6b47297ca90bb886ddb059200f0b41740c"
+                    "44ab");
+    string kat_ciphertext =
+            hex2str("9c5c825328f5ee0aa24947e374d3f9165f484b39dd808c790d7a12964810"
+                    "2453");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::ECB, PaddingMode::NONE, "", kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes192ECBPKCS7PaddingOneByteAtATime
+ * Verifies input and output sizes of AES/ECB/PKCS7Padding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes192ECBPKCS7PaddingOneByteAtATime) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        GTEST_SKIP() << "Key size 192 is not supported by Strongbox.";
+    }
+    string kat_key = hex2str("d57f4e5446f736c16476ec4db5decc7b1bf3936e4f7e4618");
+    string kat_plaintext =
+            hex2str("b115777f1ee7a43a07daa6401e59c46b7a98213a8747eabfbe3ca4ec93524d"
+                    "e2c7");
+    string kat_ciphertext =
+            hex2str("1e92cd20da08bb5fa174a7a69879d4fc25a155e6af06d75b26c5b450d273c8"
+                    "bb7e3a889dd4a9589098b44acf1056e7aa");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::ECB, PaddingMode::PKCS7, "", kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes192GCMNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/GCM/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes192GCMNoPaddingOneByteAtATime) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) {
+        GTEST_SKIP() << "Key size 192 is not supported by Strongbox.";
+    }
+    string kat_key = hex2str("21339fc1d011abca65d50ce2365230603fd47d07e8830f6e");
+    string kat_iv = hex2str("d5fb1469a8d81dd75286a418");
+    string kat_plaintext =
+            hex2str("cf776dedf53a828d51a0073db3ef0dd1ee19e2e9e243ce97e95841bb9ad4e3"
+                    "ff52");
+    string kat_ciphertext =
+            hex2str("3a0d48278111d3296bc663df8a5dbeb2474ea47fd85b608f8d9375d9dcf7de"
+                    "1413ad70fb0e1970669095ad77ebb5974ae8");
+
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::GCM, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes256CBCNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CBC/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes256CBCNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("dd2f20dc6b98c100bac919120ff95eb5d96003f8229987b283a1e777b0cd5c30");
+    string kat_iv = hex2str("23b4d85239fb90db93b07a981e90a170");
+    string kat_plaintext =
+            hex2str("2fbe5d46dca5cea433e550d8b291740ab9551c2a2d37680d7fb7b993225f58"
+                    "494cb53caca353e4b637ba05687be20f8d");
+    string kat_ciphertext =
+            hex2str("5aba24fc316936c8369061ee8fe463e4faed04288e204456626b988c0e376b"
+                    "6047da1e4fd7c4e1cf2656097f75ae8685");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CBC, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes256CBCPKCS7PaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CBC/PKCS7Padding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes256CBCPKCS7PaddingOneByteAtATime) {
+    string kat_key = hex2str("03ab2510520f5cfebfab0a17a7f8324c9634911f6fc59e586f85346bb38ac88a");
+    string kat_iv = hex2str("9af96967195bb0184f129beffa8241ae");
+    string kat_plaintext =
+            hex2str("2d6944653ac14988a772a2730b7c5bfa99a21732ae26f40cdc5b3a2874c794"
+                    "2545a82b73c48078b9dae62261c65909");
+    string kat_ciphertext =
+            hex2str("26b308f7e1668b55705a79c8b3ad10e244655f705f027f390a5c34e4536f51"
+                    "9403a71987b95124073d69f2a3cb95b0ab");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CBC, PaddingMode::PKCS7, kat_iv,
+                                  kat_plaintext, kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes256CTRNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/CTR/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes256CTRNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("928b380a8fed4b4b4cfeb56e0c66a4cb0f9ff58d61ac68bcfd0e3fbd910a684f");
+    string kat_iv = hex2str("0b678a5249e6eeda461dfb4776b6c58e");
+    string kat_plaintext =
+            hex2str("f358de57543b297e997cba46fb9100553d6abd65377e55b9aac3006400ead1"
+                    "1f6db3c884");
+    string kat_ciphertext =
+            hex2str("a07a35fbd1776ad81462e1935f542337add60962bf289249476817b6ddd532"
+                    "a7be30d4c3");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::CTR, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes256ECBNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/ECB/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes256ECBNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("fa4622d9cf6485075daedd33d2c4fffdf859e2edb7f7df4f04603f7e647fae90");
+    string kat_plaintext =
+            hex2str("96ccabbe0c68970d8cdee2b30ab43c2d61cc50ee68271e77571e72478d713a"
+                    "31a476d6806b8116089c6ec50bb543200f");
+    string kat_ciphertext =
+            hex2str("0e81839e9dfbfe3b503d619e676abe5ac80fac3f245d8f09b9134b1b32a67d"
+                    "c83e377faf246288931136bef2a07c0be4");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::ECB, PaddingMode::NONE, "", kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes256ECBPKCS7PaddingOneByteAtATime
+ * Verifies input and output sizes of AES/ECB/PKCS7Padding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes256ECBPKCS7PaddingOneByteAtATime) {
+    string kat_key = hex2str("bf3f07c68467fead0ca8e2754500ab514258abf02eb7e615a493bcaaa45d5ee1");
+    string kat_plaintext =
+            hex2str("af0757e49018dad628f16998628a407db5f28291bef3bc2e4d8a5a31fb238e"
+                    "6f");
+    string kat_ciphertext =
+            hex2str("21ec3011074bf1ef140643d47130326c5e183f61237c69bc77551ca207d71f"
+                    "c2b90cfac6c8d2d125e5cd9ff353dee0df");
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::ECB, PaddingMode::PKCS7, "", kat_plaintext,
+                                  kat_ciphertext);
+}
+
+/*
+ * EncryptionOperationsTest.Aes256GCMNoPaddingOneByteAtATime
+ * Verifies input and output sizes of AES/GCM/NoPadding Algorithm.
+ */
+TEST_P(EncryptionOperationsTest, Aes256GCMNoPaddingOneByteAtATime) {
+    string kat_key = hex2str("7972140d831eedac75d5ea515c9a4c3bb124499a90b5f317ac1a685e88fae395");
+    string kat_iv = hex2str("a66c5252808d823dd4151fed");
+    string kat_plaintext =
+            hex2str("c2b9dabf3a55adaa94e8c0d1e77a84a3435aee23b2c3c4abb587b09a9c2afb"
+                    "f0");
+    string kat_ciphertext =
+            hex2str("a960619314657b2afb96b93bebb372bffd09e19d53e351f17d1ba2611f9dc3"
+                    "3c9c92d563e8fd381254ac262aa2a4ea0d");
+
+    AesCheckEncryptOneByteAtATime(kat_key, BlockMode::GCM, PaddingMode::NONE, kat_iv, kat_plaintext,
+                                  kat_ciphertext);
+}
+
 struct AesCtrSp80038aTestVector {
     const char* key;
     const char* nonce;
@@ -6163,7 +6643,7 @@
 
     // Encrypt
     AuthorizationSet begin_out_params;
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &begin_out_params));
     string ciphertext;
     AuthorizationSet finish_out_params;
     ASSERT_EQ(ErrorCode::OK, UpdateAad(aad));
@@ -6206,7 +6686,7 @@
                                 .Authorization(TAG_MAC_LENGTH, tag_bits);
     AuthorizationSet begin_out_params;
 
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
 
     // No data, AAD only.
     EXPECT_EQ(ErrorCode::OK, UpdateAad("foo"));
@@ -6222,7 +6702,7 @@
     begin_params.push_back(begin_out_params);
 
     // Decrypt
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
     EXPECT_EQ(ErrorCode::OK, UpdateAad("foofoo"));
     string plaintext;
     EXPECT_EQ(ErrorCode::OK, Finish(ciphertext, &plaintext));
@@ -6249,7 +6729,7 @@
                                 .Authorization(TAG_MAC_LENGTH, 128);
     AuthorizationSet begin_out_params;
 
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
 
     EXPECT_EQ(ErrorCode::OK, UpdateAad("foo"));
     string ciphertext;
@@ -6283,7 +6763,7 @@
 
     // Encrypt
     AuthorizationSet begin_out_params;
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
     EXPECT_EQ(ErrorCode::OK, UpdateAad("foobar"));
     string ciphertext;
     EXPECT_EQ(ErrorCode::OK, Finish(message, &ciphertext));
@@ -6292,7 +6772,7 @@
     begin_params.push_back(begin_out_params);
 
     // Decrypt.
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params, &begin_out_params));
     EXPECT_EQ(ErrorCode::OK, UpdateAad("barfoo"));
     string plaintext;
     EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(ciphertext, &plaintext));
@@ -6319,7 +6799,7 @@
 
     // Encrypt
     AuthorizationSet begin_out_params;
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &begin_out_params));
     EXPECT_EQ(ErrorCode::OK, UpdateAad("foobar"));
     string ciphertext;
     AuthorizationSet finish_out_params;
@@ -6329,7 +6809,7 @@
     begin_params.push_back(TAG_NONCE, AidlBuf("123456789012"));
 
     // Decrypt.
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params, &begin_out_params));
     EXPECT_EQ(ErrorCode::OK, UpdateAad("foobar"));
     string plaintext;
     EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(ciphertext, &plaintext));
@@ -6361,7 +6841,7 @@
 
     // Encrypt
     AuthorizationSet begin_out_params;
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &begin_out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params, &begin_out_params));
     EXPECT_EQ(ErrorCode::OK, UpdateAad(aad));
     string ciphertext;
     EXPECT_EQ(ErrorCode::OK, Finish(message, &ciphertext));
@@ -6373,7 +6853,7 @@
     params.push_back(begin_out_params);
 
     // Decrypt.
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, params));
     EXPECT_EQ(ErrorCode::OK, UpdateAad(aad));
     string plaintext;
     EXPECT_EQ(ErrorCode::VERIFICATION_FAILED, Finish(ciphertext, &plaintext));
@@ -6486,7 +6966,7 @@
     for (size_t i = 0; i < kMaxPaddingCorruptionRetries; ++i) {
         ++ciphertext[ciphertext.size() / 2];
 
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
         string plaintext;
         EXPECT_EQ(ErrorCode::OK, Update(ciphertext, &plaintext));
         ErrorCode error = Finish(&plaintext);
@@ -6758,7 +7238,7 @@
         auto begin_params =
                 AuthorizationSetBuilder().BlockMode(blockMode).Padding(PaddingMode::NONE);
         AuthorizationSet output_params;
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &output_params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, begin_params, &output_params));
         string ciphertext;
         EXPECT_EQ(ErrorCode::INVALID_INPUT_LENGTH, Finish(message, "", &ciphertext));
 
@@ -6837,7 +7317,7 @@
     for (size_t i = 0; i < kMaxPaddingCorruptionRetries; ++i) {
         SCOPED_TRACE(testing::Message() << "i = " << i);
         ++ciphertext[ciphertext.size() / 2];
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, begin_params));
         string plaintext;
         EXPECT_EQ(ErrorCode::OK, Update(ciphertext, &plaintext));
         ErrorCode error = Finish(&plaintext);
@@ -6869,7 +7349,7 @@
     AuthorizationSet input_params =
             AuthorizationSetBuilder().BlockMode(BlockMode::CBC).Padding(PaddingMode::NONE);
     AuthorizationSet output_params;
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, input_params, &output_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, input_params, &output_params));
 
     string ciphertext;
     for (size_t i = 0; i < message.size(); i += increment)
@@ -6883,7 +7363,7 @@
     input_params.push_back(TAG_PADDING, PaddingMode::NONE);
     output_params.Clear();
 
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, input_params, &output_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, input_params, &output_params));
     string plaintext;
     for (size_t i = 0; i < ciphertext.size(); i += increment)
         EXPECT_EQ(ErrorCode::OK, Update(ciphertext.substr(i, increment), &plaintext));
@@ -7000,7 +7480,7 @@
     } else {
         // Usage count limit tag is enforced by keystore, keymint does nothing.
         EXPECT_TRUE(keystore_auths.Contains(TAG_USAGE_COUNT_LIMIT, 1U));
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params));
     }
 }
 
@@ -7047,7 +7527,7 @@
     } else {
         // Usage count limit tag is enforced by keystore, keymint does nothing.
         EXPECT_TRUE(keystore_auths.Contains(TAG_USAGE_COUNT_LIMIT, 3U));
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, params));
     }
 }
 
@@ -7093,7 +7573,7 @@
     } else {
         // Usage count limit tag is enforced by keystore, keymint does nothing.
         EXPECT_TRUE(keystore_auths.Contains(TAG_USAGE_COUNT_LIMIT, 1U));
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::SIGN, params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::SIGN, params));
     }
 }
 
@@ -7140,7 +7620,7 @@
     } else {
         // Usage count limit tag is enforced by keystore, keymint does nothing.
         EXPECT_TRUE(keystore_auths.Contains(TAG_USAGE_COUNT_LIMIT, 3U));
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::SIGN, params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::SIGN, params));
     }
 }
 
@@ -7453,7 +7933,7 @@
         EXPECT_EQ(ErrorCode::OK, Abort(op_handles[j]))
                 << "Aboort failed for i = " << j << std::endl;
     }
-    EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, key_blob_, params, &out_params));
+    ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, key_blob_, params, &out_params));
     AbortIfNeeded();
 }
 
@@ -7478,7 +7958,7 @@
                 AuthorizationSetBuilder().BlockMode(BlockMode::ECB).Padding(PaddingMode::NONE);
 
         AuthorizationSet out_params;
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, cipher_params, &out_params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::ENCRYPT, cipher_params, &out_params));
 
         string plain_message = std::string(1 << msg_size, 'x');
         string encrypted_message;
@@ -7489,7 +7969,7 @@
                 << "Encrypt finish returned OK, but did not consume all of the given input";
         cipher_params.push_back(out_params);
 
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, cipher_params));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::DECRYPT, cipher_params));
 
         string decrypted_message;
         rc = Finish(encrypted_message, &decrypted_message);
@@ -7655,7 +8135,7 @@
             if (curve != localCurve) {
                 // If the keys are using different curves KeyMint should fail with
                 // ErrorCode:INVALID_ARGUMENT. Check that.
-                EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
+                ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
                 string ZabFromKeyMintStr;
                 EXPECT_EQ(ErrorCode::INVALID_ARGUMENT,
                           Finish(string(localPublicKey.begin(), localPublicKey.end()),
@@ -7795,7 +8275,7 @@
         vector<uint8_t> encodedPublicKey;
         GenerateLocalEcKey(localCurve, &privKey, &encodedPublicKey);
 
-        EXPECT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
+        ASSERT_EQ(ErrorCode::OK, Begin(KeyPurpose::AGREE_KEY, AuthorizationSetBuilder()));
         string ZabFromKeyMintStr;
         EXPECT_EQ(ErrorCode::INVALID_ARGUMENT,
                   Finish(string(encodedPublicKey.begin(), encodedPublicKey.end()),
diff --git a/security/keymint/aidl/vts/performance/KeyMintBenchmark.cpp b/security/keymint/aidl/vts/performance/KeyMintBenchmark.cpp
index 54b6fdc..5bbae4c 100644
--- a/security/keymint/aidl/vts/performance/KeyMintBenchmark.cpp
+++ b/security/keymint/aidl/vts/performance/KeyMintBenchmark.cpp
@@ -142,6 +142,25 @@
         return Digest::NONE;
     }
 
+    optional<EcCurve> getCurveFromLength(int keySize) {
+        switch (keySize) {
+            case 224:
+                return EcCurve::P_224;
+                break;
+            case 256:
+                return EcCurve::P_256;
+                break;
+            case 384:
+                return EcCurve::P_384;
+                break;
+            case 521:
+                return EcCurve::P_521;
+                break;
+            default:
+                return {};
+        }
+    }
+
     bool GenerateKey(string transform, int keySize, bool sign = false) {
         if (transform == key_transform_) {
             return true;
@@ -184,6 +203,12 @@
         }
         if (algorithm == Algorithm::EC) {
             authSet.SetDefaultValidity();
+            std::optional<EcCurve> curve = getCurveFromLength(keySize);
+            if (!curve) {
+                std::cerr << "Error: invalid EC-Curve from size " << keySize << std::endl;
+                return false;
+            }
+            authSet.Authorization(TAG_EC_CURVE, curve.value());
         }
         error_ = GenerateKey(authSet);
         return error_ == ErrorCode::OK;
diff --git a/security/secureclock/aidl/Android.bp b/security/secureclock/aidl/Android.bp
index 00a6ba3..853ad89 100644
--- a/security/secureclock/aidl/Android.bp
+++ b/security/secureclock/aidl/Android.bp
@@ -18,11 +18,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
         rust: {
             enabled: true,
             apex_available: [
diff --git a/security/sharedsecret/aidl/Android.bp b/security/sharedsecret/aidl/Android.bp
index f1fce74..fe77c10 100644
--- a/security/sharedsecret/aidl/Android.bp
+++ b/security/sharedsecret/aidl/Android.bp
@@ -18,11 +18,6 @@
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
         rust: {
             enabled: true,
         },
diff --git a/security/sharedsecret/aidl/android/hardware/security/sharedsecret/SharedSecretParameters.aidl b/security/sharedsecret/aidl/android/hardware/security/sharedsecret/SharedSecretParameters.aidl
index 8144699..b72f0de 100644
--- a/security/sharedsecret/aidl/android/hardware/security/sharedsecret/SharedSecretParameters.aidl
+++ b/security/sharedsecret/aidl/android/hardware/security/sharedsecret/SharedSecretParameters.aidl
@@ -33,9 +33,9 @@
     byte[] seed;
 
     /**
-     * A 32-byte value which is guaranteed to be different each time
-     * getSharedSecretParameters() is called.  Probabilistic uniqueness (i.e. random) is acceptable,
-     * though a stronger uniqueness guarantee (e.g. counter) is recommended where possible.
+     * A 32-byte value which is guaranteed to be different each time getSharedSecretParameters() is
+     * called after a restart.  Probabilistic uniqueness (i.e. random) is acceptable, though a
+     * stronger uniqueness guarantee (e.g. counter) is recommended where possible.
      */
     byte[] nonce;
 }
diff --git a/sensors/2.0/multihal/android.hardware.sensors@2.0-service-multihal.rc b/sensors/2.0/multihal/android.hardware.sensors@2.0-service-multihal.rc
index 8867a1a..c874604 100644
--- a/sensors/2.0/multihal/android.hardware.sensors@2.0-service-multihal.rc
+++ b/sensors/2.0/multihal/android.hardware.sensors@2.0-service-multihal.rc
@@ -1,7 +1,7 @@
 service vendor.sensors-hal-2-0-multihal /vendor/bin/hw/android.hardware.sensors@2.0-service.multihal
     class hal
     user system
-    group system wakelock context_hub
+    group system wakelock context_hub input
     task_profiles ServiceCapacityLow
     capabilities BLOCK_SUSPEND
     rlimit rtprio 10 10
diff --git a/sensors/2.1/default/apex/apex_manifest.json b/sensors/2.1/default/apex/apex_manifest.json
deleted file mode 100644
index 47e45ee..0000000
--- a/sensors/2.1/default/apex/apex_manifest.json
+++ /dev/null
@@ -1,4 +0,0 @@
-{
-  "name": "com.android.hardware.sensors",
-  "version": 1
-}
diff --git a/sensors/2.1/default/apex/com.android.hardware.sensors.rc b/sensors/2.1/default/apex/com.android.hardware.sensors.rc
deleted file mode 100644
index bd245b4..0000000
--- a/sensors/2.1/default/apex/com.android.hardware.sensors.rc
+++ /dev/null
@@ -1,7 +0,0 @@
-service vendor.sensors-hal-2-1-mock /apex/com.android.hardware.sensors/bin/hw/android.hardware.sensors@2.1-service.mock
-    interface android.hardware.sensors@2.0::ISensors default
-    interface android.hardware.sensors@2.1::ISensors default
-    class hal
-    user system
-    group system
-    rlimit rtprio 10 10
diff --git a/sensors/2.1/default/apex/file_contexts b/sensors/2.1/default/apex/file_contexts
deleted file mode 100644
index d0095c0..0000000
--- a/sensors/2.1/default/apex/file_contexts
+++ /dev/null
@@ -1,5 +0,0 @@
-(/.*)?							u:object_r:vendor_file:s0
-# Permission XMLs
-/etc/permissions(/.*)?					u:object_r:vendor_configs_file:s0
-# Service binary
-/bin/hw/android\.hardware\.sensors@2\.1-service\.mock	u:object_r:hal_sensors_default_exec:s0
diff --git a/sensors/2.1/multihal/android.hardware.sensors@2.1-service-multihal.rc b/sensors/2.1/multihal/android.hardware.sensors@2.1-service-multihal.rc
index f47e060..deea16e 100644
--- a/sensors/2.1/multihal/android.hardware.sensors@2.1-service-multihal.rc
+++ b/sensors/2.1/multihal/android.hardware.sensors@2.1-service-multihal.rc
@@ -1,7 +1,7 @@
 service vendor.sensors-hal-2-1-multihal /vendor/bin/hw/android.hardware.sensors@2.1-service.multihal
     class hal
     user system
-    group system wakelock context_hub
+    group system wakelock context_hub input
     task_profiles ServiceCapacityLow
     capabilities BLOCK_SUSPEND
     rlimit rtprio 10 10
diff --git a/sensors/aidl/Android.bp b/sensors/aidl/Android.bp
index 1c2d83f..d04017c 100644
--- a/sensors/aidl/Android.bp
+++ b/sensors/aidl/Android.bp
@@ -23,11 +23,6 @@
         java: {
             enabled: false,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/sensors/aidl/default/Android.bp b/sensors/aidl/default/Android.bp
index 49841a4..3c66744 100644
--- a/sensors/aidl/default/Android.bp
+++ b/sensors/aidl/default/Android.bp
@@ -23,6 +23,16 @@
     default_applicable_licenses: ["hardware_interfaces_license"],
 }
 
+filegroup {
+    name: "sensors-default.rc",
+    srcs: ["sensors-default.rc"],
+}
+
+filegroup {
+    name: "sensors-default.xml",
+    srcs: ["sensors-default.xml"],
+}
+
 cc_library_static {
     name: "libsensorsexampleimpl",
     vendor: true,
@@ -47,8 +57,8 @@
 cc_binary {
     name: "android.hardware.sensors-service.example",
     relative_install_path: "hw",
-    init_rc: ["sensors-default.rc"],
-    vintf_fragments: ["sensors-default.xml"],
+    init_rc: [":sensors-default.rc"],
+    vintf_fragments: [":sensors-default.xml"],
     vendor: true,
     shared_libs: [
         "libbase",
diff --git a/sensors/2.1/default/apex/Android.bp b/sensors/aidl/default/apex/Android.bp
similarity index 78%
rename from sensors/2.1/default/apex/Android.bp
rename to sensors/aidl/default/apex/Android.bp
index 3345b92..ceb428b 100644
--- a/sensors/2.1/default/apex/Android.bp
+++ b/sensors/aidl/default/apex/Android.bp
@@ -13,9 +13,16 @@
     certificate: "com.android.hardware.sensors",
 }
 
+genrule {
+    name: "com.android.hardware.sensors.rc-gen",
+    srcs: [":sensors-default.rc"],
+    out: ["com.android.hardware.sensors.rc"],
+    cmd: "sed -E 's/\\/vendor/\\/apex\\/com.android.hardware.sensors/' $(in) > $(out)",
+}
+
 prebuilt_etc {
     name: "com.android.hardware.sensors.rc",
-    src: "com.android.hardware.sensors.rc",
+    src: ":com.android.hardware.sensors.rc-gen",
     installable: false,
 }
 
@@ -31,7 +38,7 @@
     updatable: false,
     // Install the apex in /vendor/apex
     soc_specific: true,
-    binaries: ["android.hardware.sensors@2.1-service.mock"],
+    binaries: ["android.hardware.sensors-service.example"],
     prebuilts: [
         "com.android.hardware.sensors.rc",
         "android.hardware.sensor.ambient_temperature.prebuilt.xml",
@@ -42,5 +49,5 @@
         "android.hardware.sensor.proximity.prebuilt.xml",
         "android.hardware.sensor.relative_humidity.prebuilt.xml",
     ],
-    vintf_fragments: [":android.hardware.sensors@2.1.xml"],
+    vintf_fragments: [":sensors-default.xml"],
 }
diff --git a/sensors/aidl/default/apex/apex_manifest.json b/sensors/aidl/default/apex/apex_manifest.json
new file mode 100644
index 0000000..659e739
--- /dev/null
+++ b/sensors/aidl/default/apex/apex_manifest.json
@@ -0,0 +1,4 @@
+{
+    "name": "com.android.hardware.sensors",
+    "version": 1
+}
diff --git a/sensors/2.1/default/apex/com.android.hardware.sensors.avbpubkey b/sensors/aidl/default/apex/com.android.hardware.sensors.avbpubkey
similarity index 100%
rename from sensors/2.1/default/apex/com.android.hardware.sensors.avbpubkey
rename to sensors/aidl/default/apex/com.android.hardware.sensors.avbpubkey
Binary files differ
diff --git a/sensors/2.1/default/apex/com.android.hardware.sensors.pem b/sensors/aidl/default/apex/com.android.hardware.sensors.pem
similarity index 100%
rename from sensors/2.1/default/apex/com.android.hardware.sensors.pem
rename to sensors/aidl/default/apex/com.android.hardware.sensors.pem
diff --git a/sensors/2.1/default/apex/com.android.hardware.sensors.pk8 b/sensors/aidl/default/apex/com.android.hardware.sensors.pk8
similarity index 100%
rename from sensors/2.1/default/apex/com.android.hardware.sensors.pk8
rename to sensors/aidl/default/apex/com.android.hardware.sensors.pk8
Binary files differ
diff --git a/sensors/2.1/default/apex/com.android.hardware.sensors.x509.pem b/sensors/aidl/default/apex/com.android.hardware.sensors.x509.pem
similarity index 100%
rename from sensors/2.1/default/apex/com.android.hardware.sensors.x509.pem
rename to sensors/aidl/default/apex/com.android.hardware.sensors.x509.pem
diff --git a/sensors/aidl/default/apex/file_contexts b/sensors/aidl/default/apex/file_contexts
new file mode 100644
index 0000000..27be16b
--- /dev/null
+++ b/sensors/aidl/default/apex/file_contexts
@@ -0,0 +1,5 @@
+(/.*)?							u:object_r:vendor_file:s0
+# Permission XMLs
+/etc/permissions(/.*)?					u:object_r:vendor_configs_file:s0
+# Service binary
+/bin/hw/android\.hardware\.sensors-service\.example	u:object_r:hal_sensors_default_exec:s0
\ No newline at end of file
diff --git a/sensors/aidl/multihal/android.hardware.sensors-service-multihal.rc b/sensors/aidl/multihal/android.hardware.sensors-service-multihal.rc
index 3f91a0a..1edfbec 100644
--- a/sensors/aidl/multihal/android.hardware.sensors-service-multihal.rc
+++ b/sensors/aidl/multihal/android.hardware.sensors-service-multihal.rc
@@ -1,7 +1,7 @@
 service vendor.sensors-hal-multihal /vendor/bin/hw/android.hardware.sensors-service.multihal
     class hal
     user system
-    group system wakelock context_hub
+    group system wakelock context_hub input
     task_profiles ServiceCapacityLow
     capabilities BLOCK_SUSPEND
     rlimit rtprio 10 10
\ No newline at end of file
diff --git a/soundtrigger/aidl/Android.bp b/soundtrigger/aidl/Android.bp
index 448895c..0658519 100644
--- a/soundtrigger/aidl/Android.bp
+++ b/soundtrigger/aidl/Android.bp
@@ -33,11 +33,6 @@
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/tests/extension/vibrator/aidl/default/CustomVibrator.cpp b/tests/extension/vibrator/aidl/default/CustomVibrator.cpp
index 2f3dfcb..7a7c58b 100644
--- a/tests/extension/vibrator/aidl/default/CustomVibrator.cpp
+++ b/tests/extension/vibrator/aidl/default/CustomVibrator.cpp
@@ -57,4 +57,12 @@
     return ndk::ScopedAStatus::ok();
 }
 
+ndk::SpAIBinder CustomVibrator::createBinder() {
+    auto binder = BnCustomVibrator::createBinder();
+    // e.g. AIBinder_setInheritRt(binder.get(), true);
+    // e.g. AIBinder_setMinSchedulerPolicy(binder.get(), SCHED_NORMAL, 20);
+    // e.g. AIBinder_setRequestingSid(binder.get(), true);
+    return binder;
+}
+
 }  // namespace aidl::android::hardware::tests::extension::vibrator
diff --git a/tests/extension/vibrator/aidl/default/CustomVibrator.h b/tests/extension/vibrator/aidl/default/CustomVibrator.h
index 6dc5743..084a557 100644
--- a/tests/extension/vibrator/aidl/default/CustomVibrator.h
+++ b/tests/extension/vibrator/aidl/default/CustomVibrator.h
@@ -29,6 +29,12 @@
     ndk::ScopedAStatus perform(VendorEffect effect,
                                const std::shared_ptr<IVibratorCallback>& callback,
                                int32_t* _aidl_return) override;
+
+  private:
+    // override for AIBinder_setInheritRt, AIBinder_setMinSchedulerPolicy, or
+    // AIBinder_setRequestingSid calling this in the constructor or elsewhere, the binder would
+    // immediately be destroyed.
+    ndk::SpAIBinder createBinder() override;
 };
 
 }  // namespace aidl::android::hardware::tests::extension::vibrator
diff --git a/tv/tuner/aidl/default/Filter.cpp b/tv/tuner/aidl/default/Filter.cpp
index 769ebe2..ade265c 100644
--- a/tv/tuner/aidl/default/Filter.cpp
+++ b/tv/tuner/aidl/default/Filter.cpp
@@ -432,12 +432,12 @@
 
     if (mSharedAvMemHandle != nullptr) {
         *out_avMemory = ::android::dupToAidl(mSharedAvMemHandle);
-        *_aidl_return = BUFFER_SIZE_16M;
+        *_aidl_return = BUFFER_SIZE;
         mUsingSharedAvMem = true;
         return ::ndk::ScopedAStatus::ok();
     }
 
-    int av_fd = createAvIonFd(BUFFER_SIZE_16M);
+    int av_fd = createAvIonFd(BUFFER_SIZE);
     if (av_fd < 0) {
         return ::ndk::ScopedAStatus::fromServiceSpecificError(
                 static_cast<int32_t>(Result::OUT_OF_MEMORY));
@@ -454,7 +454,7 @@
     mUsingSharedAvMem = true;
 
     *out_avMemory = ::android::dupToAidl(mSharedAvMemHandle);
-    *_aidl_return = BUFFER_SIZE_16M;
+    *_aidl_return = BUFFER_SIZE;
     return ::ndk::ScopedAStatus::ok();
 }
 
@@ -793,7 +793,8 @@
             }
             if (prefix == 0x000001) {
                 // TODO handle mulptiple Pes filters
-                mPesSizeLeft = (mFilterOutput[i + 8] << 8) | mFilterOutput[i + 9];
+                mPesSizeLeft = (static_cast<uint8_t>(mFilterOutput[i + 8]) << 8) |
+                               static_cast<uint8_t>(mFilterOutput[i + 9]);
                 mPesSizeLeft += 6;
                 if (DEBUG_FILTER) {
                     ALOGD("[Filter] pes data length %d", mPesSizeLeft);
@@ -803,7 +804,7 @@
             }
         }
 
-        int endPoint = min(184, mPesSizeLeft);
+        uint32_t endPoint = min(184u, mPesSizeLeft);
         // append data and check size
         vector<int8_t>::const_iterator first = mFilterOutput.begin() + i + 4;
         vector<int8_t>::const_iterator last = mFilterOutput.begin() + i + 4 + endPoint;
@@ -852,11 +853,17 @@
     return ::ndk::ScopedAStatus::ok();
 }
 
+// Read PES (Packetized Elementary Stream) Packets from TransportStreams
+// as defined in ISO/IEC 13818-1 Section 2.4.3.6. Create MediaEvents
+// containing only their data without TS or PES headers.
 ::ndk::ScopedAStatus Filter::startMediaFilterHandler() {
     if (mFilterOutput.empty()) {
         return ::ndk::ScopedAStatus::ok();
     }
 
+    // mPts being set before our MediaFilterHandler begins indicates that all
+    // metadata has already been handled. We can therefore create an event
+    // with the existing data. This method is used when processing ES files.
     ::ndk::ScopedAStatus result;
     if (mPts) {
         result = createMediaFilterEventWithIon(mFilterOutput);
@@ -867,16 +874,38 @@
     }
 
     for (int i = 0; i < mFilterOutput.size(); i += 188) {
+        // Every packet has a 4 Byte TS Header preceding it
+        uint32_t headerSize = 4;
+
         if (mPesSizeLeft == 0) {
-            uint32_t prefix = (mFilterOutput[i + 4] << 16) | (mFilterOutput[i + 5] << 8) |
-                              mFilterOutput[i + 6];
+            // Packet Start Code Prefix is defined as the first 3 bytes of
+            // the PES Header and should always have the value 0x000001
+            uint32_t prefix = (static_cast<uint8_t>(mFilterOutput[i + 4]) << 16) |
+                              (static_cast<uint8_t>(mFilterOutput[i + 5]) << 8) |
+                              static_cast<uint8_t>(mFilterOutput[i + 6]);
             if (DEBUG_FILTER) {
                 ALOGD("[Filter] prefix %d", prefix);
             }
             if (prefix == 0x000001) {
-                // TODO handle mulptiple Pes filters
-                mPesSizeLeft = (mFilterOutput[i + 8] << 8) | mFilterOutput[i + 9];
-                mPesSizeLeft += 6;
+                // TODO handle multiple Pes filters
+                // Location of PES fields from ISO/IEC 13818-1 Section 2.4.3.6
+                mPesSizeLeft = (static_cast<uint8_t>(mFilterOutput[i + 8]) << 8) |
+                               static_cast<uint8_t>(mFilterOutput[i + 9]);
+                bool hasPts = static_cast<uint8_t>(mFilterOutput[i + 11]) & 0x80;
+                uint8_t optionalFieldsLength = static_cast<uint8_t>(mFilterOutput[i + 12]);
+                headerSize += 9 + optionalFieldsLength;
+
+                if (hasPts) {
+                    // Pts is a 33-bit field which is stored across 5 bytes, with
+                    // bits in between as reserved fields which must be ignored
+                    mPts = 0;
+                    mPts |= (static_cast<uint8_t>(mFilterOutput[i + 13]) & 0x0e) << 29;
+                    mPts |= (static_cast<uint8_t>(mFilterOutput[i + 14]) & 0xff) << 22;
+                    mPts |= (static_cast<uint8_t>(mFilterOutput[i + 15]) & 0xfe) << 14;
+                    mPts |= (static_cast<uint8_t>(mFilterOutput[i + 16]) & 0xff) << 7;
+                    mPts |= (static_cast<uint8_t>(mFilterOutput[i + 17]) & 0xfe) >> 1;
+                }
+
                 if (DEBUG_FILTER) {
                     ALOGD("[Filter] pes data length %d", mPesSizeLeft);
                 }
@@ -885,10 +914,10 @@
             }
         }
 
-        int endPoint = min(184, mPesSizeLeft);
+        uint32_t endPoint = min(188u - headerSize, mPesSizeLeft);
         // append data and check size
-        vector<int8_t>::const_iterator first = mFilterOutput.begin() + i + 4;
-        vector<int8_t>::const_iterator last = mFilterOutput.begin() + i + 4 + endPoint;
+        vector<int8_t>::const_iterator first = mFilterOutput.begin() + i + headerSize;
+        vector<int8_t>::const_iterator last = mFilterOutput.begin() + i + headerSize + endPoint;
         mPesOutput.insert(mPesOutput.end(), first, last);
         // size does not match then continue
         mPesSizeLeft -= endPoint;
@@ -900,7 +929,8 @@
         }
 
         result = createMediaFilterEventWithIon(mPesOutput);
-        if (result.isOk()) {
+        if (!result.isOk()) {
+            mFilterOutput.clear();
             return result;
         }
     }
@@ -961,24 +991,65 @@
     return ::ndk::ScopedAStatus::ok();
 }
 
+// Read PSI (Program Specific Information) Sections from TransportStreams
+// as defined in ISO/IEC 13818-1 Section 2.4.4
 bool Filter::writeSectionsAndCreateEvent(vector<int8_t>& data) {
     // TODO check how many sections has been read
     ALOGD("[Filter] section handler");
-    if (!writeDataToFilterMQ(data)) {
-        return false;
-    }
-    DemuxFilterSectionEvent secEvent;
-    secEvent = {
-            // temp dump meta data
-            .tableId = 0,
-            .version = 1,
-            .sectionNum = 1,
-            .dataLength = static_cast<int32_t>(data.size()),
-    };
 
-    {
-        std::lock_guard<std::mutex> lock(mFilterEventsLock);
-        mFilterEvents.push_back(DemuxFilterEvent::make<DemuxFilterEvent::Tag::section>(secEvent));
+    // Transport Stream Packets are 188 bytes long, as defined in the
+    // Introduction of ISO/IEC 13818-1
+    for (int i = 0; i < data.size(); i += 188) {
+        if (mSectionSizeLeft == 0) {
+            // Location for sectionSize as defined by Section 2.4.4
+            // Note that the first 4 bytes skipped are the TsHeader
+            mSectionSizeLeft = ((static_cast<uint8_t>(data[i + 5]) & 0x0f) << 8) |
+                               static_cast<uint8_t>(data[i + 6]);
+            mSectionSizeLeft += 3;
+            if (DEBUG_FILTER) {
+                ALOGD("[Filter] section data length %d", mSectionSizeLeft);
+            }
+        }
+
+        // 184 bytes per packet is derived by subtracting the 4 byte length of
+        // the TsHeader from its 188 byte packet size
+        uint32_t endPoint = min(184u, mSectionSizeLeft);
+        // append data and check size
+        vector<int8_t>::const_iterator first = data.begin() + i + 4;
+        vector<int8_t>::const_iterator last = data.begin() + i + 4 + endPoint;
+        mSectionOutput.insert(mSectionOutput.end(), first, last);
+        // size does not match then continue
+        mSectionSizeLeft -= endPoint;
+        if (DEBUG_FILTER) {
+            ALOGD("[Filter] section data left %d", mSectionSizeLeft);
+        }
+        if (mSectionSizeLeft > 0) {
+            continue;
+        }
+
+        if (!writeDataToFilterMQ(mSectionOutput)) {
+            mSectionOutput.clear();
+            return false;
+        }
+
+        DemuxFilterSectionEvent secEvent;
+        secEvent = {
+                // temp dump meta data
+                .tableId = 0,
+                .version = 1,
+                .sectionNum = 1,
+                .dataLength = static_cast<int32_t>(mSectionOutput.size()),
+        };
+        if (DEBUG_FILTER) {
+            ALOGD("[Filter] assembled section data length %" PRIu64, secEvent.dataLength);
+        }
+
+        {
+            std::lock_guard<std::mutex> lock(mFilterEventsLock);
+            mFilterEvents.push_back(
+                    DemuxFilterEvent::make<DemuxFilterEvent::Tag::section>(secEvent));
+        }
+        mSectionOutput.clear();
     }
 
     return true;
@@ -1168,7 +1239,7 @@
     mediaEvent.isPesPrivateData = true;
     mediaEvent.extraMetaData.set<DemuxFilterMediaEventExtraMetaData::Tag::audio>(audio);
 
-    int av_fd = createAvIonFd(BUFFER_SIZE_16M);
+    int av_fd = createAvIonFd(BUFFER_SIZE);
     if (av_fd == -1) {
         return;
     }
diff --git a/tv/tuner/aidl/default/Filter.h b/tv/tuner/aidl/default/Filter.h
index e301249..b638f0c 100644
--- a/tv/tuner/aidl/default/Filter.h
+++ b/tv/tuner/aidl/default/Filter.h
@@ -50,7 +50,9 @@
 using ::android::hardware::EventFlag;
 
 using FilterMQ = AidlMessageQueue<int8_t, SynchronizedReadWrite>;
-const uint32_t BUFFER_SIZE_16M = 0x1000000;
+// Large buffer size can lead to sudden crashes due to being de-allocated
+// by the memory management system. Change the buffer size when needed.
+const uint32_t BUFFER_SIZE = 0x800000;  // 8 MB
 
 class Demux;
 class Dvr;
@@ -256,9 +258,13 @@
     std::mutex mFilterOutputLock;
     std::mutex mRecordFilterOutputLock;
 
+    // handle single Section filter
+    uint32_t mSectionSizeLeft = 0;
+    vector<int8_t> mSectionOutput;
+
     // temp handle single PES filter
     // TODO handle mulptiple Pes filters
-    int mPesSizeLeft = 0;
+    uint32_t mPesSizeLeft = 0;
     vector<int8_t> mPesOutput;
 
     // A map from data id to ion handle
diff --git a/tv/tuner/aidl/default/tuner-default.rc b/tv/tuner/aidl/default/tuner-default.rc
index d0248c2..661c219 100644
--- a/tv/tuner/aidl/default/tuner-default.rc
+++ b/tv/tuner/aidl/default/tuner-default.rc
@@ -3,5 +3,5 @@
     user media
     group mediadrm drmrpc
     ioprio rt 4
-    writepid /dev/cpuset/foreground/tasks
+    task_profiles ProcessCapacityHigh
     onrestart restart media.tuner
diff --git a/tv/tuner/aidl/vts/functional/FrontendTests.cpp b/tv/tuner/aidl/vts/functional/FrontendTests.cpp
index a1f51df..2ff0c3d 100644
--- a/tv/tuner/aidl/vts/functional/FrontendTests.cpp
+++ b/tv/tuner/aidl/vts/functional/FrontendTests.cpp
@@ -14,10 +14,10 @@
  * limitations under the License.
  */
 
-#include <aidl/android/hardware/tv/tuner/Result.h>
-
 #include "FrontendTests.h"
 
+#include <aidl/android/hardware/tv/tuner/Result.h>
+
 ndk::ScopedAStatus FrontendCallback::onEvent(FrontendEventType frontendEventType) {
     android::Mutex::Autolock autoLock(mMsgLock);
     ALOGD("[vts] frontend event received. Type: %d", frontendEventType);
@@ -323,7 +323,10 @@
         FrontendStatusType type = statusTypes[i];
         switch (type) {
             case FrontendStatusType::MODULATIONS: {
-                // TODO: verify modulations
+                ASSERT_TRUE(std::equal(
+                        realStatuses[i].get<FrontendStatus::Tag::modulations>().begin(),
+                        realStatuses[i].get<FrontendStatus::Tag::modulations>().end(),
+                        expectStatuses[i].get<FrontendStatus::Tag::modulations>().begin()));
                 break;
             }
             case FrontendStatusType::BERS: {
@@ -340,11 +343,13 @@
                 break;
             }
             case FrontendStatusType::GUARD_INTERVAL: {
-                // TODO: verify interval
+                ASSERT_TRUE(realStatuses[i].get<FrontendStatus::Tag::interval>() ==
+                            expectStatuses[i].get<FrontendStatus::Tag::interval>());
                 break;
             }
             case FrontendStatusType::TRANSMISSION_MODE: {
-                // TODO: verify tranmission mode
+                ASSERT_TRUE(realStatuses[i].get<FrontendStatus::Tag::transmissionMode>() ==
+                            expectStatuses[i].get<FrontendStatus::Tag::transmissionMode>());
                 break;
             }
             case FrontendStatusType::UEC: {
@@ -379,7 +384,8 @@
                 break;
             }
             case FrontendStatusType::ROLL_OFF: {
-                // TODO: verify roll off
+                ASSERT_TRUE(realStatuses[i].get<FrontendStatus::Tag::rollOff>() ==
+                            expectStatuses[i].get<FrontendStatus::Tag::rollOff>());
                 break;
             }
             case FrontendStatusType::IS_MISO: {
@@ -599,9 +605,10 @@
     ASSERT_TRUE(tuneFrontend(frontendConf, false /*testWithDemux*/));
 
     // TODO: find a better way to push all frontend status types
-    for (int32_t i = 0; i < static_cast<int32_t>(FrontendStatusType::ATSC3_ALL_PLP_INFO); i++) {
+    for (int32_t i = 0; i <= static_cast<int32_t>(FrontendStatusType::ATSC3_ALL_PLP_INFO); i++) {
         allTypes.push_back(static_cast<FrontendStatusType>(i));
     }
+
     ndk::ScopedAStatus status = mFrontend->getFrontendStatusReadiness(allTypes, &readiness);
     ASSERT_TRUE(status.isOk());
     ASSERT_TRUE(readiness.size() == allTypes.size());
diff --git a/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.h b/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.h
index 7f80d90..57c7592 100644
--- a/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.h
+++ b/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.h
@@ -36,11 +36,17 @@
     initFrontendConfig();
     initFilterConfig();
     initDvrConfig();
+    initTimeFilterConfig();
+    initDescramblerConfig();
+    initLnbConfig();
+    initDiseqcMsgsConfig();
     connectHardwaresToTestCases();
     if (!validateConnections()) {
         ALOGW("[vts] failed to validate connections.");
         return false;
     }
+    determineDataFlows();
+
     return true;
 }
 
@@ -58,6 +64,14 @@
     return success();
 }
 
+void clearIds() {
+    recordDvrIds.clear();
+    audioFilterIds.clear();
+    videoFilterIds.clear();
+    playbackDvrIds.clear();
+    recordFilterIds.clear();
+}
+
 class TunerLnbAidlTest : public testing::TestWithParam<std::string> {
   public:
     virtual void SetUp() override {
@@ -73,6 +87,11 @@
         mLnbTests.setService(mService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
@@ -101,6 +120,11 @@
         mFilterTests.setService(mService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
@@ -131,6 +155,11 @@
         mFilterTests.setService(mService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
@@ -197,6 +226,11 @@
         mDvrTests.setService(mService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
@@ -234,6 +268,12 @@
         mLnbTests.setService(mService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+        mLnbId = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
@@ -274,6 +314,11 @@
         mFrontendTests.setService(mService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
@@ -304,6 +349,12 @@
         mDvrTests.setService(mService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+        mLnbId = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
@@ -350,6 +401,11 @@
         mDescramblerTests.setCasService(mCasService);
     }
 
+    virtual void TearDown() override {
+        clearIds();
+        mService = nullptr;
+    }
+
   protected:
     static void description(const std::string& description) {
         RecordProperty("description", description);
diff --git a/tv/tuner/aidl/vts/functional/VtsHalTvTunerTestConfigurations.h b/tv/tuner/aidl/vts/functional/VtsHalTvTunerTestConfigurations.h
index 5f1f9c5..c4b0962 100644
--- a/tv/tuner/aidl/vts/functional/VtsHalTvTunerTestConfigurations.h
+++ b/tv/tuner/aidl/vts/functional/VtsHalTvTunerTestConfigurations.h
@@ -162,13 +162,130 @@
     TunerTestingConfigAidlReader1_0::readDvrConfig1_0(dvrMap);
 };
 
+inline void initTimeFilterConfig() {
+    // Read customized config
+    TunerTestingConfigAidlReader1_0::readTimeFilterConfig1_0(timeFilterMap);
+};
+
+inline void initDescramblerConfig() {
+    // Read customized config
+    TunerTestingConfigAidlReader1_0::readDescramblerConfig1_0(descramblerMap);
+}
+
+inline void initLnbConfig() {
+    // Read customized config
+    TunerTestingConfigAidlReader1_0::readLnbConfig1_0(lnbMap);
+};
+
+inline void initDiseqcMsgsConfig() {
+    // Read customized config
+    TunerTestingConfigAidlReader1_0::readDiseqcMessages(diseqcMsgMap);
+};
+
+inline void determineScan() {
+    if (!frontendMap.empty()) {
+        scan.hasFrontendConnection = true;
+        ALOGD("Can support scan");
+    }
+}
+
+inline void determineTimeFilter() {
+    if (!timeFilterMap.empty()) {
+        timeFilter.support = true;
+        ALOGD("Can support time filter");
+    }
+}
+
+inline void determineDvrPlayback() {
+    if (!playbackDvrIds.empty() && !audioFilterIds.empty() && !videoFilterIds.empty()) {
+        playback.support = true;
+        ALOGD("Can support dvr playback");
+    }
+}
+
+inline void determineLnbLive() {
+    if (!audioFilterIds.empty() && !videoFilterIds.empty() && !frontendMap.empty() &&
+        !lnbMap.empty()) {
+        lnbLive.support = true;
+        ALOGD("Can support lnb live");
+    }
+}
+
+inline void determineLnbRecord() {
+    if (!frontendMap.empty() && !recordFilterIds.empty() && !recordDvrIds.empty() &&
+        !lnbMap.empty()) {
+        lnbRecord.support = true;
+        ALOGD("Can support lnb record");
+    }
+}
+
+inline void determineLive() {
+    if (videoFilterIds.empty() || audioFilterIds.empty() || frontendMap.empty()) {
+        return;
+    }
+    if (hasSwFe && !hasHwFe && dvrMap.empty()) {
+        ALOGD("Cannot configure Live. Only software frontends and no dvr connections");
+        return;
+    }
+    ALOGD("Can support live");
+    live.hasFrontendConnection = true;
+}
+
+inline void determineDescrambling() {
+    if (descramblerMap.empty() || audioFilterIds.empty() || videoFilterIds.empty()) {
+        return;
+    }
+    if (frontendMap.empty() && playbackDvrIds.empty()) {
+        ALOGD("Cannot configure descrambling. No frontends or playback dvr's");
+        return;
+    }
+    if (hasSwFe && !hasHwFe && playbackDvrIds.empty()) {
+        ALOGD("cannot configure descrambling. Only SW frontends and no playback dvr's");
+        return;
+    }
+    ALOGD("Can support descrambling");
+    descrambling.support = true;
+}
+
+inline void determineDvrRecord() {
+    if (recordDvrIds.empty() || recordFilterIds.empty()) {
+        return;
+    }
+    if (frontendMap.empty() && playbackDvrIds.empty()) {
+        ALOGD("Cannot support dvr record. No frontends and  no playback dvr's");
+        return;
+    }
+    if (hasSwFe && !hasHwFe && playbackDvrIds.empty()) {
+        ALOGD("Cannot support dvr record. Only SW frontends and no playback dvr's");
+        return;
+    }
+    ALOGD("Can support dvr record.");
+    record.support = true;
+}
+
 /** Read the vendor configurations of which hardware to use for each test cases/data flows */
 inline void connectHardwaresToTestCases() {
     TunerTestingConfigAidlReader1_0::connectLiveBroadcast(live);
     TunerTestingConfigAidlReader1_0::connectScan(scan);
     TunerTestingConfigAidlReader1_0::connectDvrRecord(record);
+    TunerTestingConfigAidlReader1_0::connectTimeFilter(timeFilter);
+    TunerTestingConfigAidlReader1_0::connectDescrambling(descrambling);
+    TunerTestingConfigAidlReader1_0::connectLnbLive(lnbLive);
+    TunerTestingConfigAidlReader1_0::connectLnbRecord(lnbRecord);
+    TunerTestingConfigAidlReader1_0::connectDvrPlayback(playback);
 };
 
+inline void determineDataFlows() {
+    determineScan();
+    determineTimeFilter();
+    determineDvrPlayback();
+    determineLnbLive();
+    determineLnbRecord();
+    determineLive();
+    determineDescrambling();
+    determineDvrRecord();
+}
+
 inline bool validateConnections() {
     if (record.support && !record.hasFrontendConnection &&
         record.dvrSourceId.compare(emptyHardwareId) == 0) {
@@ -183,6 +300,14 @@
     feIsValid &= record.support && record.hasFrontendConnection
                          ? frontendMap.find(record.frontendId) != frontendMap.end()
                          : true;
+    feIsValid &= descrambling.support && descrambling.hasFrontendConnection
+                         ? frontendMap.find(descrambling.frontendId) != frontendMap.end()
+                         : true;
+
+    feIsValid &= lnbLive.support ? frontendMap.find(lnbLive.frontendId) != frontendMap.end() : true;
+
+    feIsValid &=
+            lnbRecord.support ? frontendMap.find(lnbRecord.frontendId) != frontendMap.end() : true;
 
     if (!feIsValid) {
         ALOGW("[vts config] dynamic config fe connection is invalid.");
@@ -204,6 +329,20 @@
         dvrIsValid &= dvrMap.find(record.dvrRecordId) != dvrMap.end();
     }
 
+    if (descrambling.support) {
+        if (descrambling.hasFrontendConnection) {
+            if (frontendMap[descrambling.frontendId].isSoftwareFe) {
+                dvrIsValid &= dvrMap.find(descrambling.dvrSoftwareFeId) != dvrMap.end();
+            }
+        } else {
+            dvrIsValid &= dvrMap.find(descrambling.dvrSourceId) != dvrMap.end();
+        }
+    }
+
+    dvrIsValid &= lnbRecord.support ? dvrMap.find(lnbRecord.dvrRecordId) != dvrMap.end() : true;
+
+    dvrIsValid &= playback.support ? dvrMap.find(playback.dvrId) != dvrMap.end() : true;
+
     if (!dvrIsValid) {
         ALOGW("[vts config] dynamic config dvr connection is invalid.");
         return false;
@@ -216,10 +355,90 @@
     filterIsValid &=
             record.support ? filterMap.find(record.recordFilterId) != filterMap.end() : true;
 
+    filterIsValid &= descrambling.support
+                             ? filterMap.find(descrambling.videoFilterId) != filterMap.end() &&
+                                       filterMap.find(descrambling.audioFilterId) != filterMap.end()
+                             : true;
+
+    for (auto& filterId : descrambling.extraFilters) {
+        filterIsValid &= filterMap.find(filterId) != filterMap.end();
+    }
+
+    filterIsValid &= lnbLive.support
+                             ? filterMap.find(lnbLive.audioFilterId) != filterMap.end() &&
+                                       filterMap.find(lnbLive.videoFilterId) != filterMap.end()
+                             : true;
+
+    filterIsValid &=
+            lnbRecord.support ? filterMap.find(lnbRecord.recordFilterId) != filterMap.end() : true;
+
+    for (auto& filterId : lnbRecord.extraFilters) {
+        filterIsValid &= filterMap.find(filterId) != filterMap.end();
+    }
+
+    for (auto& filterId : lnbLive.extraFilters) {
+        filterIsValid &= filterMap.find(filterId) != filterMap.end();
+    }
+
+    filterIsValid &= playback.support
+                             ? filterMap.find(playback.audioFilterId) != filterMap.end() &&
+                                       filterMap.find(playback.videoFilterId) != filterMap.end()
+                             : true;
+    filterIsValid &= playback.sectionFilterId.compare(emptyHardwareId) == 0
+                             ? true
+                             : filterMap.find(playback.sectionFilterId) != filterMap.end();
+
+    for (auto& filterId : playback.extraFilters) {
+        filterIsValid &=
+                playback.hasExtraFilters ? filterMap.find(filterId) != filterMap.end() : true;
+    }
+
     if (!filterIsValid) {
         ALOGW("[vts config] dynamic config filter connection is invalid.");
         return false;
     }
 
+    bool timeFilterIsValid =
+            timeFilter.support ? timeFilterMap.find(timeFilter.timeFilterId) != timeFilterMap.end()
+                               : true;
+
+    if (!timeFilterIsValid) {
+        ALOGW("[vts config] dynamic config time filter connection is invalid.");
+    }
+
+    bool descramblerIsValid =
+            descrambling.support
+                    ? descramblerMap.find(descrambling.descramblerId) != descramblerMap.end()
+                    : true;
+
+    if (!descramblerIsValid) {
+        ALOGW("[vts config] dynamic config descrambler connection is invalid.");
+        return false;
+    }
+
+    bool lnbIsValid = lnbLive.support ? lnbMap.find(lnbLive.lnbId) != lnbMap.end() : true;
+
+    lnbIsValid &= lnbRecord.support ? lnbMap.find(lnbRecord.lnbId) != lnbMap.end() : true;
+
+    if (!lnbIsValid) {
+        ALOGW("[vts config] dynamic config lnb connection is invalid.");
+        return false;
+    }
+
+    bool diseqcMsgsIsValid = true;
+
+    for (auto& msg : lnbRecord.diseqcMsgs) {
+        diseqcMsgsIsValid &= diseqcMsgMap.find(msg) != diseqcMsgMap.end();
+    }
+
+    for (auto& msg : lnbLive.diseqcMsgs) {
+        diseqcMsgsIsValid &= diseqcMsgMap.find(msg) != diseqcMsgMap.end();
+    }
+
+    if (!diseqcMsgsIsValid) {
+        ALOGW("[vts config] dynamic config diseqcMsg is invalid.");
+        return false;
+    }
+
     return true;
 }
diff --git a/tv/tuner/config/TunerTestingConfigAidlReaderV1_0.h b/tv/tuner/config/TunerTestingConfigAidlReaderV1_0.h
index 189f5fd..7c757b4 100644
--- a/tv/tuner/config/TunerTestingConfigAidlReaderV1_0.h
+++ b/tv/tuner/config/TunerTestingConfigAidlReaderV1_0.h
@@ -62,10 +62,28 @@
 using namespace aidl::android::hardware::tv::tuner;
 using namespace android::media::tuner::testing::configuration::V1_0;
 
+static bool hasHwFe = false;
+static bool hasSwFe = false;
+static bool configFileRead = false;
+static bool configuredLive = false;
+static bool configuredScan = false;
+static bool configuredRecord = false;
+static bool configuredLnbLive = false;
+static bool configuredPlayback = false;
+static bool configuredLnbRecord = false;
+static bool configuredTimeFilter = false;
+static bool configuredDescrambling = false;
+
 const string emptyHardwareId = "";
 
 static string mConfigFilePath;
 
+static vector<string> playbackDvrIds;
+static vector<string> recordDvrIds;
+static vector<string> audioFilterIds;
+static vector<string> videoFilterIds;
+static vector<string> recordFilterIds;
+
 #define PROVISION_STR                                      \
     "{                                                   " \
     "  \"id\": 21140844,                                 " \
@@ -146,12 +164,13 @@
 
 struct DvrPlaybackHardwareConnections {
     bool support;
+    bool hasExtraFilters = false;
     string frontendId;
     string dvrId;
     string audioFilterId;
     string videoFilterId;
     string sectionFilterId;
-    /* list string of extra filters; */
+    vector<string> extraFilters;
 };
 
 struct DvrRecordHardwareConnections {
@@ -173,7 +192,7 @@
     string videoFilterId;
     string descramblerId;
     string dvrSourceId;
-    /* list string of extra filters; */
+    vector<string> extraFilters;
 };
 
 struct LnbLiveHardwareConnections {
@@ -183,7 +202,7 @@
     string videoFilterId;
     string lnbId;
     vector<string> diseqcMsgs;
-    /* list string of extra filters; */
+    vector<string> extraFilters;
 };
 
 struct LnbRecordHardwareConnections {
@@ -193,7 +212,7 @@
     string recordFilterId;
     string lnbId;
     vector<string> diseqcMsgs;
-    /* list string of extra filters; */
+    vector<string> extraFilters;
 };
 
 struct TimeFilterHardwareConnections {
@@ -263,6 +282,9 @@
                         break;
                     case FrontendTypeEnum::ATSC:
                         type = FrontendType::ATSC;
+                        frontendMap[id].settings.set<
+                            FrontendSettings::Tag::atsc>(
+                                readAtscFrontendSettings(feConfig));
                         break;
                     case FrontendTypeEnum::ATSC3:
                         type = FrontendType::ATSC3;
@@ -283,12 +305,16 @@
                     }
                     case FrontendTypeEnum::ISDBS:
                         type = FrontendType::ISDBS;
+                        frontendMap[id].settings.set<FrontendSettings::Tag::isdbs>(
+                                readIsdbsFrontendSettings(feConfig));
                         break;
                     case FrontendTypeEnum::ISDBS3:
                         type = FrontendType::ISDBS3;
                         break;
                     case FrontendTypeEnum::ISDBT:
                         type = FrontendType::ISDBT;
+                        frontendMap[id].settings.set<FrontendSettings::Tag::isdbt>(
+                                readIsdbtFrontendSettings(feConfig));
                         break;
                     case FrontendTypeEnum::DTMB:
                         type = FrontendType::DTMB;
@@ -302,6 +328,11 @@
                 }
                 frontendMap[id].type = type;
                 frontendMap[id].isSoftwareFe = feConfig.getIsSoftwareFrontend();
+                if (frontendMap[id].isSoftwareFe) {
+                    hasSwFe = true;
+                } else {
+                    hasHwFe = true;
+                }
                 // TODO: b/182519645 complete the tune status config
                 frontendMap[id].tuneStatusTypes = types;
                 frontendMap[id].expectTuneStatuses = statuses;
@@ -376,11 +407,13 @@
                 DvrType type;
                 switch (dvrConfig.getType()) {
                     case DvrTypeEnum::PLAYBACK:
+                        playbackDvrIds.push_back(id);
                         type = DvrType::PLAYBACK;
                         dvrMap[id].settings.set<DvrSettings::Tag::playback>(
                                 readPlaybackSettings(dvrConfig));
                         break;
                     case DvrTypeEnum::RECORD:
+                        recordDvrIds.push_back(id);
                         type = DvrType::RECORD;
                         dvrMap[id].settings.set<DvrSettings::Tag::record>(
                                 readRecordSettings(dvrConfig));
@@ -469,6 +502,7 @@
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasClearLiveBroadcast()) {
             live.hasFrontendConnection = true;
+            configuredLive = true;
         } else {
             live.hasFrontendConnection = false;
             return;
@@ -502,6 +536,7 @@
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasScan()) {
             scan.hasFrontendConnection = true;
+            configuredScan = true;
         } else {
             scan.hasFrontendConnection = false;
             return;
@@ -514,6 +549,7 @@
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasDvrPlayback()) {
             playback.support = true;
+            configuredPlayback = true;
         } else {
             playback.support = false;
             return;
@@ -527,12 +563,20 @@
         } else {
             playback.sectionFilterId = emptyHardwareId;
         }
+        if (playbackConfig.hasOptionalFilters() && !playback.hasExtraFilters) {
+            auto optionalFilters = playbackConfig.getFirstOptionalFilters()->getOptionalFilter();
+            for (size_t i = 0; i < optionalFilters.size(); ++i) {
+                playback.extraFilters.push_back(optionalFilters[i].getFilterId());
+            }
+            playback.hasExtraFilters = true;
+        }
     }
 
     static void connectDvrRecord(DvrRecordHardwareConnections& record) {
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasDvrRecord()) {
             record.support = true;
+            configuredRecord = true;
         } else {
             record.support = false;
             return;
@@ -557,6 +601,7 @@
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasDescrambling()) {
             descrambling.support = true;
+            configuredDescrambling = true;
         } else {
             descrambling.support = false;
             return;
@@ -576,12 +621,17 @@
             descrambling.hasFrontendConnection = false;
             descrambling.dvrSourceId = descConfig.getDvrSourceConnection();
         }
+        if (descConfig.hasOptionalFilters()) {
+            auto optionalFilters = descConfig.getOptionalFilters();
+            descrambling.extraFilters = optionalFilters;
+        }
     }
 
     static void connectLnbLive(LnbLiveHardwareConnections& lnbLive) {
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasLnbLive()) {
             lnbLive.support = true;
+            configuredLnbLive = true;
         } else {
             lnbLive.support = false;
             return;
@@ -596,12 +646,17 @@
                 lnbLive.diseqcMsgs.push_back(msgName);
             }
         }
+        if (lnbLiveConfig.hasOptionalFilters()) {
+            auto optionalFilters = lnbLiveConfig.getOptionalFilters();
+            lnbLive.extraFilters = optionalFilters;
+        }
     }
 
     static void connectLnbRecord(LnbRecordHardwareConnections& lnbRecord) {
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasLnbRecord()) {
             lnbRecord.support = true;
+            configuredLnbRecord = true;
         } else {
             lnbRecord.support = false;
             return;
@@ -616,12 +671,17 @@
                 lnbRecord.diseqcMsgs.push_back(msgName);
             }
         }
+        if (lnbRecordConfig.hasOptionalFilters()) {
+            auto optionalFilters = lnbRecordConfig.getOptionalFilters();
+            lnbRecord.extraFilters = optionalFilters;
+        }
     }
 
     static void connectTimeFilter(TimeFilterHardwareConnections& timeFilter) {
         auto dataFlow = getDataFlowConfiguration();
         if (dataFlow.hasTimeFilter()) {
             timeFilter.support = true;
+            configuredTimeFilter = true;
         } else {
             timeFilter.support = false;
             return;
@@ -691,11 +751,95 @@
         return dvbsSettings;
     }
 
+    static FrontendAtscSettings readAtscFrontendSettings(Frontend& feConfig) {
+        ALOGW("[ConfigReader] fe type is atsc");
+        FrontendAtscSettings atscSettings{
+                .frequency = (int64_t)feConfig.getFrequency(),
+        };
+        if (feConfig.hasEndFrequency()) {
+            atscSettings.endFrequency = (int64_t)feConfig.getEndFrequency();
+        }
+        if (!feConfig.hasAtscFrontendSettings_optional()) {
+            ALOGW("[ConfigReader] no more atsc settings");
+            return atscSettings;
+        }
+        auto atsc = feConfig.getFirstAtscFrontendSettings_optional();
+        atscSettings.inversion = static_cast<FrontendSpectralInversion>(atsc->getInversion());
+        atscSettings.modulation = static_cast<FrontendAtscModulation>(atsc->getModulation());
+        return atscSettings;
+    }
+
+    static FrontendIsdbsSettings readIsdbsFrontendSettings(Frontend& feConfig) {
+        ALOGW("[ConfigReader] fe type is isdbs");
+        FrontendIsdbsSettings isdbsSettings{.frequency = (int64_t)feConfig.getFrequency()};
+        if (feConfig.hasEndFrequency()) {
+            isdbsSettings.endFrequency = (int64_t)feConfig.getEndFrequency();
+        }
+        if (!feConfig.hasIsdbsFrontendSettings_optional()) {
+            ALOGW("[ConfigReader] no more isdbs settings");
+            return isdbsSettings;
+        }
+        auto isdbs = feConfig.getFirstIsdbsFrontendSettings_optional();
+        isdbsSettings.streamId = (int32_t)isdbs->getStreamId();
+        isdbsSettings.symbolRate = (int32_t)isdbs->getSymbolRate();
+        isdbsSettings.modulation = static_cast<FrontendIsdbsModulation>(isdbs->getModulation());
+        isdbsSettings.coderate = static_cast<FrontendIsdbsCoderate>(isdbs->getCoderate());
+        isdbsSettings.rolloff = static_cast<FrontendIsdbsRolloff>(isdbs->getRolloff());
+        isdbsSettings.streamIdType =
+                static_cast<FrontendIsdbsStreamIdType>(isdbs->getStreamIdType());
+        return isdbsSettings;
+    }
+
+    static FrontendIsdbtSettings readIsdbtFrontendSettings(Frontend& feConfig) {
+        ALOGW("[ConfigReader] fe type is isdbt");
+        FrontendIsdbtSettings isdbtSettings{
+                .frequency = (int64_t)feConfig.getFrequency(),
+        };
+        if (feConfig.hasEndFrequency()) {
+            isdbtSettings.endFrequency = (int64_t)feConfig.getEndFrequency();
+        }
+        if (!feConfig.hasIsdbtFrontendSettings_optional()) {
+            ALOGW("[ConfigReader] no more isdbt settings");
+            return isdbtSettings;
+        }
+        auto isdbt = feConfig.getFirstIsdbtFrontendSettings_optional();
+        isdbtSettings.inversion = static_cast<FrontendSpectralInversion>(isdbt->getInversion());
+        isdbtSettings.bandwidth = static_cast<FrontendIsdbtBandwidth>(isdbt->getBandwidth());
+        isdbtSettings.mode = static_cast<FrontendIsdbtMode>(isdbt->getMode());
+        isdbtSettings.guardInterval =
+                static_cast<FrontendIsdbtGuardInterval>(isdbt->getGuardInterval());
+        isdbtSettings.serviceAreaId = (int32_t)isdbt->getServiceAreaId();
+        isdbtSettings.partialReceptionFlag =
+                static_cast<FrontendIsdbtPartialReceptionFlag>(isdbt->getPartialReceptionFlag());
+        if (!isdbt->hasFrontendIsdbtLayerSettings()) {
+            ALOGW("[ConfigReader] no isdbt layer settings");
+            return isdbtSettings;
+        }
+        auto layerSettings = isdbt->getFirstFrontendIsdbtLayerSettings();
+        ::aidl::android::hardware::tv::tuner::FrontendIsdbtLayerSettings mLayerSettings;
+        mLayerSettings.modulation =
+                static_cast<FrontendIsdbtModulation>(layerSettings->getModulation());
+        mLayerSettings.coderate = static_cast<FrontendIsdbtCoderate>(layerSettings->getCoderate());
+        mLayerSettings.timeInterleave =
+                static_cast<FrontendIsdbtTimeInterleaveMode>(layerSettings->getTimeInterleave());
+        mLayerSettings.numOfSegment = (int32_t)layerSettings->getNumOfSegment();
+        isdbtSettings.layerSettings.push_back(mLayerSettings);
+        return isdbtSettings;
+    }
+
     static bool readFilterTypeAndSettings(Filter filterConfig, DemuxFilterType& type,
                                           DemuxFilterSettings& settings) {
         auto mainType = filterConfig.getMainType();
         auto subType = filterConfig.getSubType();
 
+        if (subType == FilterSubTypeEnum::AUDIO) {
+            audioFilterIds.push_back(filterConfig.getId());
+        } else if (subType == FilterSubTypeEnum::VIDEO) {
+            videoFilterIds.push_back(filterConfig.getId());
+        } else if (subType == FilterSubTypeEnum::RECORD) {
+            recordFilterIds.push_back(filterConfig.getId());
+        }
+
         switch (mainType) {
             case FilterMainTypeEnum::TS: {
                 ALOGW("[ConfigReader] filter main type is ts");
diff --git a/tv/tuner/config/api/current.txt b/tv/tuner/config/api/current.txt
index 383d49f..9b500c3 100644
--- a/tv/tuner/config/api/current.txt
+++ b/tv/tuner/config/api/current.txt
@@ -1,6 +1,14 @@
 // Signature format: 2.0
 package android.media.tuner.testing.configuration.V1_0 {
 
+  public class AtscFrontendSettings {
+    ctor public AtscFrontendSettings();
+    method @Nullable public java.math.BigInteger getInversion();
+    method @Nullable public java.math.BigInteger getModulation();
+    method public void setInversion(@Nullable java.math.BigInteger);
+    method public void setModulation(@Nullable java.math.BigInteger);
+  }
+
   public class AvFilterSettings {
     ctor public AvFilterSettings();
     method @Nullable public short getAudioStreamType_optional();
@@ -59,6 +67,7 @@
     method @Nullable public String getDvrSourceConnection();
     method @Nullable public String getFrontendConnection();
     method @Nullable public boolean getHasFrontendConnection();
+    method @Nullable public java.util.List<java.lang.String> getOptionalFilters();
     method @Nullable public String getVideoFilterConnection();
     method public void setAudioFilterConnection(@Nullable String);
     method public void setDescramblerConnection(@Nullable String);
@@ -66,6 +75,7 @@
     method public void setDvrSourceConnection(@Nullable String);
     method public void setFrontendConnection(@Nullable String);
     method public void setHasFrontendConnection(@Nullable boolean);
+    method public void setOptionalFilters(@Nullable java.util.List<java.lang.String>);
     method public void setVideoFilterConnection(@Nullable String);
   }
 
@@ -73,14 +83,21 @@
     ctor public DataFlowConfiguration.DvrPlayback();
     method @Nullable public String getAudioFilterConnection();
     method @Nullable public String getDvrConnection();
+    method @Nullable public android.media.tuner.testing.configuration.V1_0.DataFlowConfiguration.DvrPlayback.OptionalFilters getOptionalFilters();
     method @Nullable public String getSectionFilterConnection();
     method @Nullable public String getVideoFilterConnection();
     method public void setAudioFilterConnection(@Nullable String);
     method public void setDvrConnection(@Nullable String);
+    method public void setOptionalFilters(@Nullable android.media.tuner.testing.configuration.V1_0.DataFlowConfiguration.DvrPlayback.OptionalFilters);
     method public void setSectionFilterConnection(@Nullable String);
     method public void setVideoFilterConnection(@Nullable String);
   }
 
+  public static class DataFlowConfiguration.DvrPlayback.OptionalFilters {
+    ctor public DataFlowConfiguration.DvrPlayback.OptionalFilters();
+    method @Nullable public java.util.List<android.media.tuner.testing.configuration.V1_0.OptionalFilter> getOptionalFilter();
+  }
+
   public static class DataFlowConfiguration.DvrRecord {
     ctor public DataFlowConfiguration.DvrRecord();
     method @Nullable public String getDvrRecordConnection();
@@ -103,11 +120,13 @@
     method @Nullable public java.util.List<java.lang.String> getDiseqcMsgSender();
     method @Nullable public String getFrontendConnection();
     method @Nullable public String getLnbConnection();
+    method @Nullable public java.util.List<java.lang.String> getOptionalFilters();
     method @Nullable public String getVideoFilterConnection();
     method public void setAudioFilterConnection(@Nullable String);
     method public void setDiseqcMsgSender(@Nullable java.util.List<java.lang.String>);
     method public void setFrontendConnection(@Nullable String);
     method public void setLnbConnection(@Nullable String);
+    method public void setOptionalFilters(@Nullable java.util.List<java.lang.String>);
     method public void setVideoFilterConnection(@Nullable String);
   }
 
@@ -117,11 +136,13 @@
     method @Nullable public String getDvrRecordConnection();
     method @Nullable public String getFrontendConnection();
     method @Nullable public String getLnbConnection();
+    method @Nullable public java.util.List<java.lang.String> getOptionalFilters();
     method @Nullable public String getRecordFilterConnection();
     method public void setDiseqcMsgSender(@Nullable java.util.List<java.lang.String>);
     method public void setDvrRecordConnection(@Nullable String);
     method public void setFrontendConnection(@Nullable String);
     method public void setLnbConnection(@Nullable String);
+    method public void setOptionalFilters(@Nullable java.util.List<java.lang.String>);
     method public void setRecordFilterConnection(@Nullable String);
   }
 
@@ -310,6 +331,7 @@
 
   public class Frontend {
     ctor public Frontend();
+    method @Nullable public android.media.tuner.testing.configuration.V1_0.AtscFrontendSettings getAtscFrontendSettings_optional();
     method @Nullable public java.math.BigInteger getConnectToCicamId();
     method @Nullable public android.media.tuner.testing.configuration.V1_0.DvbsFrontendSettings getDvbsFrontendSettings_optional();
     method @Nullable public android.media.tuner.testing.configuration.V1_0.DvbtFrontendSettings getDvbtFrontendSettings_optional();
@@ -317,8 +339,11 @@
     method @Nullable public java.math.BigInteger getFrequency();
     method @Nullable public String getId();
     method @Nullable public boolean getIsSoftwareFrontend();
+    method @Nullable public android.media.tuner.testing.configuration.V1_0.IsdbsFrontendSettings getIsdbsFrontendSettings_optional();
+    method @Nullable public android.media.tuner.testing.configuration.V1_0.IsdbtFrontendSettings getIsdbtFrontendSettings_optional();
     method @Nullable public java.math.BigInteger getRemoveOutputPid();
     method @Nullable public android.media.tuner.testing.configuration.V1_0.FrontendTypeEnum getType();
+    method public void setAtscFrontendSettings_optional(@Nullable android.media.tuner.testing.configuration.V1_0.AtscFrontendSettings);
     method public void setConnectToCicamId(@Nullable java.math.BigInteger);
     method public void setDvbsFrontendSettings_optional(@Nullable android.media.tuner.testing.configuration.V1_0.DvbsFrontendSettings);
     method public void setDvbtFrontendSettings_optional(@Nullable android.media.tuner.testing.configuration.V1_0.DvbtFrontendSettings);
@@ -326,10 +351,24 @@
     method public void setFrequency(@Nullable java.math.BigInteger);
     method public void setId(@Nullable String);
     method public void setIsSoftwareFrontend(@Nullable boolean);
+    method public void setIsdbsFrontendSettings_optional(@Nullable android.media.tuner.testing.configuration.V1_0.IsdbsFrontendSettings);
+    method public void setIsdbtFrontendSettings_optional(@Nullable android.media.tuner.testing.configuration.V1_0.IsdbtFrontendSettings);
     method public void setRemoveOutputPid(@Nullable java.math.BigInteger);
     method public void setType(@Nullable android.media.tuner.testing.configuration.V1_0.FrontendTypeEnum);
   }
 
+  public class FrontendIsdbtLayerSettings {
+    ctor public FrontendIsdbtLayerSettings();
+    method @Nullable public java.math.BigInteger getCoderate();
+    method @Nullable public java.math.BigInteger getModulation();
+    method @Nullable public java.math.BigInteger getNumOfSegment();
+    method @Nullable public java.math.BigInteger getTimeInterleave();
+    method public void setCoderate(@Nullable java.math.BigInteger);
+    method public void setModulation(@Nullable java.math.BigInteger);
+    method public void setNumOfSegment(@Nullable java.math.BigInteger);
+    method public void setTimeInterleave(@Nullable java.math.BigInteger);
+  }
+
   public enum FrontendTypeEnum {
     method @NonNull public String getRawName();
     enum_constant public static final android.media.tuner.testing.configuration.V1_0.FrontendTypeEnum ANALOG;
@@ -422,6 +461,40 @@
     method public void setSrcPort(@Nullable long);
   }
 
+  public class IsdbsFrontendSettings {
+    ctor public IsdbsFrontendSettings();
+    method @Nullable public java.math.BigInteger getCoderate();
+    method @Nullable public java.math.BigInteger getModulation();
+    method @Nullable public java.math.BigInteger getRolloff();
+    method @Nullable public java.math.BigInteger getStreamId();
+    method @Nullable public java.math.BigInteger getStreamIdType();
+    method @Nullable public java.math.BigInteger getSymbolRate();
+    method public void setCoderate(@Nullable java.math.BigInteger);
+    method public void setModulation(@Nullable java.math.BigInteger);
+    method public void setRolloff(@Nullable java.math.BigInteger);
+    method public void setStreamId(@Nullable java.math.BigInteger);
+    method public void setStreamIdType(@Nullable java.math.BigInteger);
+    method public void setSymbolRate(@Nullable java.math.BigInteger);
+  }
+
+  public class IsdbtFrontendSettings {
+    ctor public IsdbtFrontendSettings();
+    method @Nullable public java.math.BigInteger getBandwidth();
+    method @Nullable public android.media.tuner.testing.configuration.V1_0.FrontendIsdbtLayerSettings getFrontendIsdbtLayerSettings();
+    method @Nullable public java.math.BigInteger getGuardInterval();
+    method @Nullable public java.math.BigInteger getInversion();
+    method @Nullable public java.math.BigInteger getMode();
+    method @Nullable public java.math.BigInteger getPartialReceptionFlag();
+    method @Nullable public java.math.BigInteger getServiceAreaId();
+    method public void setBandwidth(@Nullable java.math.BigInteger);
+    method public void setFrontendIsdbtLayerSettings(@Nullable android.media.tuner.testing.configuration.V1_0.FrontendIsdbtLayerSettings);
+    method public void setGuardInterval(@Nullable java.math.BigInteger);
+    method public void setInversion(@Nullable java.math.BigInteger);
+    method public void setMode(@Nullable java.math.BigInteger);
+    method public void setPartialReceptionFlag(@Nullable java.math.BigInteger);
+    method public void setServiceAreaId(@Nullable java.math.BigInteger);
+  }
+
   public class Lnb {
     ctor public Lnb();
     method @Nullable public String getId();
@@ -462,6 +535,12 @@
     enum_constant public static final android.media.tuner.testing.configuration.V1_0.LnbVoltageEnum VOLTAGE_5V;
   }
 
+  public class OptionalFilter {
+    ctor public OptionalFilter();
+    method @Nullable public String getFilterId();
+    method public void setFilterId(@Nullable String);
+  }
+
   public class RecordFilterSettings {
     ctor public RecordFilterSettings();
     method @Nullable public android.media.tuner.testing.configuration.V1_0.ScIndexTypeEnum getScIndexType();
diff --git a/tv/tuner/config/sample_tuner_vts_config_aidl_V1.xml b/tv/tuner/config/sample_tuner_vts_config_aidl_V1.xml
index fefe86e..90f3c9b 100644
--- a/tv/tuner/config/sample_tuner_vts_config_aidl_V1.xml
+++ b/tv/tuner/config/sample_tuner_vts_config_aidl_V1.xml
@@ -1,19 +1,15 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <!-- Copyright (C) 2021 The Android Open Source Project
-
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
-
           http://www.apache.org/licenses/LICENSE-2.0
-
      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.
 -->
-
 <!-- The Sample Tuner Testing Configuration.
     Name the customized xml with "tuner_vts_config.xml" and push into the device
     "/vendor/etc" path. Please use "tuner_testing_dynamic_configuration.xsd" to verify the xml.
@@ -32,7 +28,6 @@
                 - The default settings can be found in the sample_tuner_vts_configurations.xml.
                 - The users can also override the default frontend settings using id="FE_DEFAULT".
                 - The users can configure 1 or more frontend elements in the frontends sections.
-
             Each frontend element contain the following attributes:
                 "id": unique id of the frontend that could be used to connect to the test the
                     "dataFlowConfiguration"
@@ -46,7 +41,6 @@
                     output. Supported in Tuner 2.0 or higher.
                 "frequency": the frequency used to configure tune and scan.
                 "endFrequency": the end frequency of scan. Supported in Tuner 1.1 or higher.
-
             Each frontend element also contains one and only one type-related "frontendSettings".
                 - The settings type should match the frontend "type" attribute.
                 - For example, when frontend type="DVBT", dvbtFrontendSettings can be configured.
@@ -54,14 +48,35 @@
                     config only to the hal.
         -->
         <frontends>
-            <frontend id="FE_DEFAULT" type="DVBT" isSoftwareFrontend="true"
+            <frontend id="FE_DEFAULT" type="ISDBS" isSoftwareFrontend="true"
                       connectToCicamId="0" removeOutputPid="10" frequency="578000000"
                       endFrequency="800000000">
-                <dvbtFrontendSettings bandwidth="8" transmissionMode="128" isHighPriority="1"/>
+              <isdbsFrontendSettings streamId="0" symbolRate="0" streamIdType="0" modulation="0" coderate="0" rolloff="0"/>
+            </frontend>
+            <frontend id="FE_ATSC_0" type="ATSC" isSoftwareFrontend="true"
+                      connectToCicamId="0" removeOutputPid="10" frequency="578000000"
+                      endFrequency="800000000">
+              <atscFrontendSettings inversion="0" modulation="0"/>
+            </frontend>
+            <frontend id="FE_ISDBT_0" type="ISDBT" isSoftwareFrontend="true"
+                      connectToCicamId="0" removeOutputPid="10" frequency="578000000"
+                      endFrequency="800000000">
+              <isdbtFrontendSettings serviceAreaId="0" inversion="0" bandwidth="0" mode="0" guardInterval="0" partialReceptionFlag="0">
+                <FrontendIsdbtLayerSettings modulation="0" coderate="0" timeInterleave="0" numOfSegment="0"/>
+              </isdbtFrontendSettings>
             </frontend>
             <frontend id="FE_DVBS_0" type="DVBS" isSoftwareFrontend="true"
                       connectToCicamId="0" removeOutputPid="10" frequency="578000000"
                       endFrequency="800000000">
+              <dvbsFrontendSettings inputStreamId="0" symbolRate="0"/>
+            </frontend>
+            <frontend id="FE_DVBT_0" type="DVBT" isSoftwareFrontend="true"
+                      connectToCicamId="0" removeOutputPid="10" frequency="578000000"
+                      endFrequency="800000000">
+              <dvbtFrontendSettings bandwidth="8" transmissionMode="1" isHighPriority="1"
+                                    constellation="1" hierarchy="1" hpCoderate="1" lpCoderate="1"
+                                    guardInterval="1" standard="1" isMiso="0" plpMode="1"
+                                    plpId="0" plpGroupId="0"/>
             </frontend>
         </frontends>
         <!-- Filter section:
@@ -71,7 +86,6 @@
                 - The users can also override the default filter settings using
                 - id="FILTER_AUDIO_DEFAULT" or "FILTER_VIDEO_DEFAULT".
                 - The users can configure 1 or more filter elements in the filters sections.
-
             Each filter element contain the following attributes:
                 "id": unique id of the filter that could be used to connect to the test the
                     "dataFlowConfiguration"
@@ -80,7 +94,6 @@
                 "bufferSize": the buffer size of the filter in hex.
                 "pid": the pid that would be used to configure the filter.
                 "useFMQ": if the filter uses FMQ.
-
             Each filter element also contains at most one type-related "filterSettings".
                 - The settings type should match the filter "subType" attribute.
                 - For example, when filter subType is audio or video, the avFilterSettings can be
@@ -89,6 +102,9 @@
                     only to the hal.
         -->
         <filters>
+            <filter id="FILTER_SECTION_DEFAULT" mainType="TS" subType="SECTION"
+              bufferSize="16777216" pid="257" useFMQ="false" monitorEventTypes="3">
+          </filter>
             <filter id="FILTER_AUDIO_DEFAULT" mainType="TS" subType="AUDIO"
                     bufferSize="16777216" pid="257" useFMQ="false" monitorEventTypes="3">
                 <avFilterSettings isPassthrough="false" isSecureMemory="false">
@@ -116,7 +132,6 @@
             This section contains configurations of all the dvrs that would be used in the tests.
                 - This section is optional and can be skipped if DVR is not supported.
                 - The users can configure 1 or more dvr elements in the dvrs sections.
-
             Each dvr element contain the following attributes:
                 "id": unique id of the dvr that could be used to connect to the test the
                     "dataFlowConfiguration"
@@ -140,8 +155,21 @@
                  statusMask="15" lowThreshold="4096" highThreshold="32767"
                  dataFormat="ES" packetSize="188" inputFilePath="/data/local/tmp/test.es"/>
         </dvrs>
+        <descramblers>
+            <descrambler id="DESCRAMBLER_0" casSystemId="63192"/>
+        </descramblers>
+        <timeFilters>
+            <timeFilter id="TIME_FILTER_0" timeStamp="1"/>
+        </timeFilters>
+        <diseqcMessages>
+            <diseqcMessage msgName="DISEQC_POWER_ON" msgBody="14 0 0 0 0 3"/>
+        </diseqcMessages>
+        <lnbs>
+            <lnb id="LNB_0" voltage="VOLTAGE_12V" tone="NONE" position="UNDEFINED"/>
+            <lnb id="LNB_1" name="default_lnb_external" voltage="VOLTAGE_5V"
+                            tone="NONE" position="UNDEFINED"/>
+        </lnbs>
     </hardwareConfiguration>
-
     <!-- Data flow configuration section connects each data flow under test to the ids of the
         hardwares that would be used during the tests. -->
     <dataFlowConfiguration>
@@ -151,13 +179,34 @@
                             ipFilterConnection="FILTER_IP_IP_0"
                             dvrSoftwareFeConnection="DVR_PLAYBACK_1"/>
         <scan frontendConnection="FE_DEFAULT"/>
-        <dvrPlayback dvrConnection="DVR_PLAYBACK_1"
-                     audioFilterConnection="FILTER_AUDIO_DEFAULT"
-                     videoFilterConnection="FILTER_VIDEO_DEFAULT"/>
         <dvrRecord hasFrontendConnection="true"
                    frontendConnection="FE_DEFAULT"
                    recordFilterConnection="FILTER_TS_RECORD_0"
                    dvrRecordConnection="DVR_RECORD_0"
                    dvrSoftwareFeConnection="DVR_PLAYBACK_1"/>
+        <dvrPlayback dvrConnection="DVR_PLAYBACK_1"
+                     audioFilterConnection="FILTER_AUDIO_DEFAULT"
+                     videoFilterConnection="FILTER_VIDEO_DEFAULT"
+                     sectionFilterConnection="FILTER_SECTION_DEFAULT"/>
+        <descrambling hasFrontendConnection="true"
+                      frontendConnection="FE_DEFAULT"
+                      descramblerConnection="DESCRAMBLER_0"
+                      audioFilterConnection="FILTER_AUDIO_DEFAULT"
+                      videoFilterConnection="FILTER_VIDEO_DEFAULT"
+                      dvrSoftwareFeConnection="DVR_PLAYBACK_0"
+                      dvrSourceConnection="DVR_PLAYBACK_1">
+                      <optionalFilters>FILTER_TS_RECORD_0 FILTER_IP_IP_0</optionalFilters>
+        </descrambling>
+        <timeFilter timeFilterConnection="TIME_FILTER_0"/>
+        <lnbLive frontendConnection="FE_DVBS_0"
+                 audioFilterConnection="FILTER_AUDIO_DEFAULT"
+                 videoFilterConnection="FILTER_VIDEO_DEFAULT"
+                 lnbConnection="LNB_1"
+                 diseqcMsgSender="DISEQC_POWER_ON"/>
+        <lnbRecord frontendConnection="FE_DVBS_0"
+                   recordFilterConnection="FILTER_TS_RECORD_0"
+                   dvrRecordConnection="DVR_RECORD_0"
+                   lnbConnection="LNB_0"
+                   diseqcMsgSender="DISEQC_POWER_ON"/>
     </dataFlowConfiguration>
 </TunerConfiguration>
diff --git a/tv/tuner/config/tuner_testing_dynamic_configuration.xsd b/tv/tuner/config/tuner_testing_dynamic_configuration.xsd
index 59abd9a..ee768ba 100644
--- a/tv/tuner/config/tuner_testing_dynamic_configuration.xsd
+++ b/tv/tuner/config/tuner_testing_dynamic_configuration.xsd
@@ -80,6 +80,33 @@
         <xs:attribute name="scanType" type="dvbsScanType" use="optional"/>
         <xs:attribute name="isDiseqcRxMessage" type="xs:boolean" use="optional"/>
     </xs:complexType>
+    <xs:complexType name="atscFrontendSettings">
+        <xs:attribute name="inversion" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="modulation" type="xs:nonNegativeInteger" use="required"/>
+    </xs:complexType>
+    <xs:complexType name="isdbsFrontendSettings">
+        <xs:attribute name="streamId" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="symbolRate" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="streamIdType" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="modulation" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="coderate" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="rolloff" type="xs:nonNegativeInteger" use="required"/>
+    </xs:complexType>
+    <xs:complexType name="isdbtFrontendSettings">
+        <xs:attribute name="serviceAreaId" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="inversion" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="bandwidth" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="mode" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="guardInterval" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="partialReceptionFlag" type="xs:nonNegativeInteger" use="required"/>
+        <xs:element name="FrontendIsdbtLayerSettings" type="FrontendIsdbtLayerSettings"/>
+    </xs:complexType>
+    <xs:complexType name="FrontendIsdbtLayerSettings">
+        <xs:attribute name="modulation" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="coderate" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="timeInterleave" type="xs:nonNegativeInteger" use="required"/>
+        <xs:attribute name="numOfSegment" type="xs:nonNegativeInteger" use="required"/>
+    </xs:complexType>
 
     <xs:complexType name="frontend">
         <xs:annotation>
@@ -109,16 +136,16 @@
         </xs:annotation>
         <xs:choice minOccurs="0" maxOccurs="1">
             <!-- TODO: b/182519645 finish all the frontend settings structures. -->
-            <!--xs:element name="analog" type="analogSettings"/>
-            <xs:element name="atsc" type="atscSettings"/>
-            <xs:element name="atsc3" type="atsc3Settings"/>
+            <!--xs:element name="analog" type="analogSettings"/-->
+            <xs:element name="atscFrontendSettings" type="atscFrontendSettings"/>
+            <!--xs:element name="atsc3" type="atsc3Settings"/>
             <xs:element name="dvbc" type="dvbcSettings"/-->
             <xs:element name="dvbsFrontendSettings" type="dvbsFrontendSettings"/>
             <xs:element name="dvbtFrontendSettings" type="dvbtFrontendSettings"/>
-            <!--xs:element name="isdbs" type="isdbsSettings"/>
-            <xs:element name="isdbs3" type="isdbs3Settings"/>
-            <xs:element name="isdbt" type="isdbtSettings"/>
-            <xs:element name="dtmb" type="dtmbSettings"/-->
+            <xs:element name="isdbsFrontendSettings" type="isdbsFrontendSettings"/>
+            <!--xs:element name="isdbs3" type="isdbs3Settings"/-->
+            <xs:element name="isdbtFrontendSettings" type="isdbtFrontendSettings"/>
+            <!--xs:element name="dtmb" type="dtmbSettings"/-->
         </xs:choice>
         <xs:attribute name="id" type="frontendId" use="required"/>
         <xs:attribute name="type" type="frontendTypeEnum" use="required"/>
@@ -639,6 +666,7 @@
                     <xs:attribute name="audioFilterConnection" type="filterId" use="required"/>
                     <xs:attribute name="videoFilterConnection" type="filterId" use="required"/>
                     <!-- TODO: b/182519645 allow the users to insert extra filters -->
+                    <xs:element name="optionalFilters" type="filterConnections" minOccurs="0" maxOccurs="1"/>
                     <!-- This DVR is only required when the frontend is using the software input -->
                     <xs:attribute name="dvrSoftwareFeConnection" type="dvrId" use="optional"/>
                     <!-- This Dvr is only required when there's no frontend(sw or hw) connection -->
@@ -651,7 +679,14 @@
                     <xs:attribute name="audioFilterConnection" type="filterId" use="required"/>
                     <xs:attribute name="videoFilterConnection" type="filterId" use="required"/>
                     <xs:attribute name="sectionFilterConnection" type="filterId" use="optional"/>
-                    <!-- TODO: b/182519645 allow the users to insert extra filters -->
+                    <xs:element name="optionalFilters" minOccurs="0" maxOccurs="1">
+                      <xs:complexType>
+                          <xs:sequence>
+                            <xs:element name="optionalFilter" type="optionalFilter" minOccurs="1" maxOccurs="unbounded"/>
+                          </xs:sequence>
+                      </xs:complexType>
+                    </xs:element>
+                    <!--TODO: b/182519645 allow the users to insert extra filters/-->
                 </xs:complexType>
             </xs:element>
             <xs:element name="dvrRecord" minOccurs="0" maxOccurs="1">
@@ -675,7 +710,7 @@
                     <xs:attribute name="videoFilterConnection" type="filterId" use="required"/>
                     <xs:attribute name="lnbConnection" type="lnbId" use="required"/>
                     <xs:attribute name="diseqcMsgSender" type="diseqcMsgSender" use="optional"/>
-                    <!-- TODO: b/182519645 allow the users to insert extra filters -->
+                    <xs:element name="optionalFilters" type="filterConnections" minOccurs="0" maxOccurs="1"/>
                 </xs:complexType>
             </xs:element>
             <xs:element name="lnbRecord" minOccurs="0" maxOccurs="1">
@@ -685,6 +720,7 @@
                     <xs:attribute name="dvrRecordConnection" type="dvrId" use="required"/>
                     <xs:attribute name="lnbConnection" type="lnbId" use="required"/>
                     <xs:attribute name="diseqcMsgSender" type="diseqcMsgSender" use="optional"/>
+                    <xs:element name="optionalFilters" type="filterConnections" minOccurs="0" maxOccurs="1"/>
                 </xs:complexType>
             </xs:element>
             <xs:element name="timeFilter" minOccurs="0" maxOccurs="1">
@@ -729,4 +765,7 @@
             <xs:field xpath="@id"/>
         </xs:key>
     </xs:element>
+    <xs:complexType name="optionalFilter">
+        <xs:attribute name="filterId" type="filterId" use="required"/>
+    </xs:complexType>
 </xs:schema>
diff --git a/usb/1.0/default/Usb.cpp b/usb/1.0/default/Usb.cpp
index 6eb8842..573e0e3 100644
--- a/usb/1.0/default/Usb.cpp
+++ b/usb/1.0/default/Usb.cpp
@@ -234,7 +234,7 @@
     else
         return Status::UNRECOGNIZED_ROLE;
 
-        return Status::SUCCESS;
+    return Status::SUCCESS;
 }
 
 Status getPortStatusHelper (hidl_vec<PortStatus>& currentPortStatus) {
diff --git a/usb/aidl/Android.bp b/usb/aidl/Android.bp
index 7eb6020..4f59f02 100644
--- a/usb/aidl/Android.bp
+++ b/usb/aidl/Android.bp
@@ -33,11 +33,6 @@
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions_with_info: [
         {
diff --git a/uwb/aidl/Android.bp b/uwb/aidl/Android.bp
index 3981724..7dc2b7f 100755
--- a/uwb/aidl/Android.bp
+++ b/uwb/aidl/Android.bp
@@ -21,9 +21,6 @@
             enabled: false,
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
             apex_available: [
                 "//apex_available:platform",
                 "com.android.uwb",
diff --git a/uwb/aidl/android/hardware/uwb/IUwbChip.aidl b/uwb/aidl/android/hardware/uwb/IUwbChip.aidl
index 00cb8e0..6ee5799 100644
--- a/uwb/aidl/android/hardware/uwb/IUwbChip.aidl
+++ b/uwb/aidl/android/hardware/uwb/IUwbChip.aidl
@@ -71,8 +71,8 @@
      * The UCI message format is as per UCI  protocol and it is
      * defined in "FiRa Consortium - UCI Generic Specification_v1.0" specification at FiRa
      * consortium.
-     * WIP doc link: https://groups.firaconsortium.org/wg/Technical/document/folder/127.
-     * TODO(b/196004116): Link to the published specification.
+     *
+     * UCI 1.1 specification: https://groups.firaconsortium.org/wg/members/document/1949.
      *
      * This method may queue writes and return immediately, or it may block until data is written.
      * Implementation must guarantee that writes are executed in order.
diff --git a/uwb/aidl/android/hardware/uwb/IUwbClientCallback.aidl b/uwb/aidl/android/hardware/uwb/IUwbClientCallback.aidl
index 75853cd..f31aeba 100755
--- a/uwb/aidl/android/hardware/uwb/IUwbClientCallback.aidl
+++ b/uwb/aidl/android/hardware/uwb/IUwbClientCallback.aidl
@@ -28,8 +28,7 @@
      * can use to pass incoming data to the stack.  These include UCI
      * responses and notifications from the UWB subsystem.
      *
-     * WIP doc link: https://groups.firaconsortium.org/wg/Technical/document/folder/127.
-     * TODO(b/196004116): Link to the published specification.
+     * UCI 1.1 specification: https://groups.firaconsortium.org/wg/members/document/1949.
      *
      * @param data UCI packet sent.
      */
diff --git a/vibrator/aidl/Android.bp b/vibrator/aidl/Android.bp
index d4d5857..86ef027 100644
--- a/vibrator/aidl/Android.bp
+++ b/vibrator/aidl/Android.bp
@@ -19,11 +19,6 @@
         java: {
             sdk_version: "module_current",
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: [
         "1",
diff --git a/vibrator/aidl/default/Vibrator.cpp b/vibrator/aidl/default/Vibrator.cpp
index ddc6ee0..01602ab 100644
--- a/vibrator/aidl/default/Vibrator.cpp
+++ b/vibrator/aidl/default/Vibrator.cpp
@@ -59,7 +59,10 @@
                                 const std::shared_ptr<IVibratorCallback>& callback) {
     LOG(VERBOSE) << "Vibrator on for timeoutMs: " << timeoutMs;
     if (callback != nullptr) {
-        std::thread([=] {
+        // Note that thread lambdas aren't using implicit capture [=], to avoid capturing "this",
+        // which may be asynchronously destructed.
+        // If "this" is needed, use [sharedThis = this->ref<Vibrator>()].
+        std::thread([timeoutMs, callback] {
             LOG(VERBOSE) << "Starting on on another thread";
             usleep(timeoutMs * 1000);
             LOG(VERBOSE) << "Notifying on complete";
@@ -87,7 +90,7 @@
     constexpr size_t kEffectMillis = 100;
 
     if (callback != nullptr) {
-        std::thread([=] {
+        std::thread([callback] {
             LOG(VERBOSE) << "Starting perform on another thread";
             usleep(kEffectMillis * 1000);
             LOG(VERBOSE) << "Notifying perform complete";
@@ -174,7 +177,8 @@
         }
     }
 
-    std::thread([=] {
+    // The thread may theoretically outlive the vibrator, so take a proper reference to it.
+    std::thread([sharedThis = this->ref<Vibrator>(), composite, callback] {
         LOG(VERBOSE) << "Starting compose on another thread";
 
         for (auto& e : composite) {
@@ -185,7 +189,7 @@
                          << e.scale;
 
             int32_t durationMs;
-            getPrimitiveDuration(e.primitive, &durationMs);
+            sharedThis->getPrimitiveDuration(e.primitive, &durationMs);
             usleep(durationMs * 1000);
         }
 
@@ -396,7 +400,7 @@
         }
     }
 
-    std::thread([=] {
+    std::thread([totalDuration, callback] {
         LOG(VERBOSE) << "Starting composePwle on another thread";
         usleep(totalDuration * 1000);
         if (callback != nullptr) {
diff --git a/vibrator/aidl/default/VibratorManager.cpp b/vibrator/aidl/default/VibratorManager.cpp
index 7cf9e6a..26edf5a 100644
--- a/vibrator/aidl/default/VibratorManager.cpp
+++ b/vibrator/aidl/default/VibratorManager.cpp
@@ -66,7 +66,7 @@
 ndk::ScopedAStatus VibratorManager::triggerSynced(
         const std::shared_ptr<IVibratorCallback>& callback) {
     LOG(INFO) << "Vibrator Manager trigger synced";
-    std::thread([=] {
+    std::thread([callback] {
         if (callback != nullptr) {
             LOG(INFO) << "Notifying perform complete";
             callback->onComplete();
diff --git a/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp b/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
index 3841715..791d7e8 100644
--- a/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
+++ b/vibrator/aidl/vts/VtsHalVibratorTargetTest.cpp
@@ -332,6 +332,7 @@
         sleep(1);
         EXPECT_EQ(Status::EX_NONE, vibrator->setAmplitude(1.0f).exceptionCode());
         sleep(1);
+        EXPECT_TRUE(vibrator->off().isOk());
     }
 }
 
diff --git a/weaver/aidl/Android.bp b/weaver/aidl/Android.bp
index 8b4306f..caa92aa 100644
--- a/weaver/aidl/Android.bp
+++ b/weaver/aidl/Android.bp
@@ -16,11 +16,6 @@
         java: {
             platform_apis: true,
         },
-        ndk: {
-            vndk: {
-                enabled: true,
-            },
-        },
     },
     versions: ["1"],
 }
diff --git a/wifi/1.4/vts/functional/wifi_hidl_test_utils_1_4.h b/wifi/1.4/vts/functional/wifi_hidl_test_utils_1_4.h
index a2c5815..ca7b57a 100644
--- a/wifi/1.4/vts/functional/wifi_hidl_test_utils_1_4.h
+++ b/wifi/1.4/vts/functional/wifi_hidl_test_utils_1_4.h
@@ -28,6 +28,6 @@
 // These helper functions should be modified to return vectors if we support
 // multiple instances.
 android::sp<android::hardware::wifi::V1_4::IWifiChip> getWifiChip_1_4(
-        const std::string& instance_name);
+    const std::string& instance_name);
 android::sp<android::hardware::wifi::V1_4::IWifiApIface> getWifiApIface_1_4(
-        const std::string& instance_name);
+    const std::string& instance_name);
diff --git a/wifi/aidl/Android.bp b/wifi/aidl/Android.bp
new file mode 100644
index 0000000..c0ca667
--- /dev/null
+++ b/wifi/aidl/Android.bp
@@ -0,0 +1,44 @@
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+aidl_interface {
+    name: "android.hardware.wifi",
+    vendor_available: true,
+    srcs: [
+        "android/hardware/wifi/*.aidl",
+    ],
+    stability: "vintf",
+    backend: {
+        java: {
+            sdk_version: "module_current",
+            apex_available: [
+                "//apex_available:platform",
+                "com.android.wifi",
+            ],
+            min_sdk_version: "30",
+            lint: {
+                enabled: false,
+            },
+        },
+    },
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifi.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifi.aidl
new file mode 100644
index 0000000..cc995fc
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifi.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifi {
+  @PropagateAllowBlocking android.hardware.wifi.IWifiChip getChip(int chipId);
+  int[] getChipIds();
+  boolean isStarted();
+  void registerEventCallback(in android.hardware.wifi.IWifiEventCallback callback);
+  void start();
+  void stop();
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiApIface.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiApIface.aidl
new file mode 100644
index 0000000..a102b97
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiApIface.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiApIface {
+  String getName();
+  String[] getBridgedInstances();
+  byte[6] getFactoryMacAddress();
+  void setCountryCode(in byte[2] code);
+  int[] getValidFrequenciesForBand(in android.hardware.wifi.WifiBand band);
+  void resetToFactoryMacAddress();
+  void setMacAddress(in byte[6] mac);
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiChip.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiChip.aidl
new file mode 100644
index 0000000..647891f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiChip.aidl
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiChip {
+  void configureChip(in int modeId);
+  @PropagateAllowBlocking android.hardware.wifi.IWifiApIface createApIface();
+  @PropagateAllowBlocking android.hardware.wifi.IWifiApIface createBridgedApIface();
+  @PropagateAllowBlocking android.hardware.wifi.IWifiNanIface createNanIface();
+  @PropagateAllowBlocking android.hardware.wifi.IWifiP2pIface createP2pIface();
+  @PropagateAllowBlocking android.hardware.wifi.IWifiRttController createRttController(in android.hardware.wifi.IWifiStaIface boundIface);
+  @PropagateAllowBlocking android.hardware.wifi.IWifiStaIface createStaIface();
+  void enableDebugErrorAlerts(in boolean enable);
+  void flushRingBufferToFile();
+  void forceDumpToDebugRingBuffer(in String ringName);
+  @PropagateAllowBlocking android.hardware.wifi.IWifiApIface getApIface(in String ifname);
+  String[] getApIfaceNames();
+  android.hardware.wifi.IWifiChip.ChipMode[] getAvailableModes();
+  android.hardware.wifi.IWifiChip.ChipCapabilityMask getCapabilities();
+  android.hardware.wifi.WifiDebugHostWakeReasonStats getDebugHostWakeReasonStats();
+  android.hardware.wifi.WifiDebugRingBufferStatus[] getDebugRingBuffersStatus();
+  int getId();
+  int getMode();
+  @PropagateAllowBlocking android.hardware.wifi.IWifiNanIface getNanIface(in String ifname);
+  String[] getNanIfaceNames();
+  @PropagateAllowBlocking android.hardware.wifi.IWifiP2pIface getP2pIface(in String ifname);
+  String[] getP2pIfaceNames();
+  @PropagateAllowBlocking android.hardware.wifi.IWifiStaIface getStaIface(in String ifname);
+  String[] getStaIfaceNames();
+  android.hardware.wifi.WifiRadioCombinationMatrix getSupportedRadioCombinationsMatrix();
+  android.hardware.wifi.WifiUsableChannel[] getUsableChannels(in android.hardware.wifi.WifiBand band, in android.hardware.wifi.WifiIfaceMode ifaceModeMask, in android.hardware.wifi.IWifiChip.UsableChannelFilter filterMask);
+  void registerEventCallback(in android.hardware.wifi.IWifiChipEventCallback callback);
+  void removeApIface(in String ifname);
+  void removeIfaceInstanceFromBridgedApIface(in String brIfaceName, in String ifaceInstanceName);
+  void removeNanIface(in String ifname);
+  void removeP2pIface(in String ifname);
+  void removeStaIface(in String ifname);
+  android.hardware.wifi.IWifiChip.ChipDebugInfo requestChipDebugInfo();
+  byte[] requestDriverDebugDump();
+  byte[] requestFirmwareDebugDump();
+  void resetTxPowerScenario();
+  void selectTxPowerScenario(in android.hardware.wifi.IWifiChip.TxPowerScenario scenario);
+  void setCoexUnsafeChannels(in android.hardware.wifi.IWifiChip.CoexUnsafeChannel[] unsafeChannels, in android.hardware.wifi.IWifiChip.CoexRestriction restrictions);
+  void setCountryCode(in byte[2] code);
+  void setLatencyMode(in android.hardware.wifi.IWifiChip.LatencyMode mode);
+  void setMultiStaPrimaryConnection(in String ifName);
+  void setMultiStaUseCase(in android.hardware.wifi.IWifiChip.MultiStaUseCase useCase);
+  void startLoggingToDebugRingBuffer(in String ringName, in android.hardware.wifi.WifiDebugRingBufferVerboseLevel verboseLevel, in int maxIntervalInSec, in int minDataSizeInBytes);
+  void stopLoggingToDebugRingBuffer();
+  void triggerSubsystemRestart();
+  const int NO_POWER_CAP_CONSTANT = 2147483647;
+  @Backing(type="int") @VintfStability
+  enum ChipCapabilityMask {
+    DEBUG_MEMORY_FIRMWARE_DUMP = 1,
+    DEBUG_MEMORY_DRIVER_DUMP = 2,
+    DEBUG_RING_BUFFER_CONNECT_EVENT = 4,
+    DEBUG_RING_BUFFER_POWER_EVENT = 8,
+    DEBUG_RING_BUFFER_WAKELOCK_EVENT = 16,
+    DEBUG_RING_BUFFER_VENDOR_DATA = 32,
+    DEBUG_HOST_WAKE_REASON_STATS = 64,
+    DEBUG_ERROR_ALERTS = 128,
+    SET_TX_POWER_LIMIT = 256,
+    D2D_RTT = 512,
+    D2AP_RTT = 1024,
+    USE_BODY_HEAD_SAR = 2048,
+    SET_LATENCY_MODE = 4096,
+    P2P_RAND_MAC = 8192,
+    WIGIG = 16384,
+  }
+  @VintfStability
+  parcelable ChipConcurrencyCombinationLimit {
+    android.hardware.wifi.IfaceConcurrencyType[] types;
+    int maxIfaces;
+  }
+  @VintfStability
+  parcelable ChipConcurrencyCombination {
+    android.hardware.wifi.IWifiChip.ChipConcurrencyCombinationLimit[] limits;
+  }
+  @VintfStability
+  parcelable ChipDebugInfo {
+    String driverDescription;
+    String firmwareDescription;
+  }
+  @VintfStability
+  parcelable ChipIfaceCombinationLimit {
+    android.hardware.wifi.IfaceType[] types;
+    int maxIfaces;
+  }
+  @VintfStability
+  parcelable ChipIfaceCombination {
+    android.hardware.wifi.IWifiChip.ChipIfaceCombinationLimit[] limits;
+  }
+  @VintfStability
+  parcelable ChipMode {
+    int id;
+    android.hardware.wifi.IWifiChip.ChipConcurrencyCombination[] availableCombinations;
+  }
+  @Backing(type="int") @VintfStability
+  enum CoexRestriction {
+    WIFI_DIRECT = 1,
+    SOFTAP = 2,
+    WIFI_AWARE = 4,
+  }
+  @VintfStability
+  parcelable CoexUnsafeChannel {
+    android.hardware.wifi.WifiBand band;
+    int channel;
+    int powerCapDbm;
+  }
+  @Backing(type="int") @VintfStability
+  enum LatencyMode {
+    NORMAL = 0,
+    LOW = 1,
+  }
+  @Backing(type="byte") @VintfStability
+  enum MultiStaUseCase {
+    DUAL_STA_TRANSIENT_PREFER_PRIMARY = 0,
+    DUAL_STA_NON_TRANSIENT_UNBIASED = 1,
+  }
+  @Backing(type="int") @VintfStability
+  enum TxPowerScenario {
+    VOICE_CALL = 0,
+    ON_HEAD_CELL_OFF = 1,
+    ON_HEAD_CELL_ON = 2,
+    ON_BODY_CELL_OFF = 3,
+    ON_BODY_CELL_ON = 4,
+  }
+  @Backing(type="int") @VintfStability
+  enum UsableChannelFilter {
+    CELLULAR_COEXISTENCE = 1,
+    CONCURRENCY = 2,
+    NAN_INSTANT_MODE = 4,
+  }
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiChipEventCallback.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiChipEventCallback.aidl
new file mode 100644
index 0000000..3fd8533
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiChipEventCallback.aidl
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiChipEventCallback {
+  oneway void onChipReconfigureFailure(in android.hardware.wifi.WifiStatusCode status);
+  oneway void onChipReconfigured(in int modeId);
+  oneway void onDebugErrorAlert(in int errorCode, in byte[] debugData);
+  oneway void onDebugRingBufferDataAvailable(in android.hardware.wifi.WifiDebugRingBufferStatus status, in byte[] data);
+  oneway void onIfaceAdded(in android.hardware.wifi.IfaceType type, in String name);
+  oneway void onIfaceRemoved(in android.hardware.wifi.IfaceType type, in String name);
+  oneway void onRadioModeChange(in android.hardware.wifi.IWifiChipEventCallback.RadioModeInfo[] radioModeInfos);
+  @VintfStability
+  parcelable IfaceInfo {
+    String name;
+    int channel;
+  }
+  @VintfStability
+  parcelable RadioModeInfo {
+    int radioId;
+    android.hardware.wifi.WifiBand bandInfo;
+    android.hardware.wifi.IWifiChipEventCallback.IfaceInfo[] ifaceInfos;
+  }
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiEventCallback.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiEventCallback.aidl
new file mode 100644
index 0000000..00e5cb6
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiEventCallback.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiEventCallback {
+  oneway void onFailure(in android.hardware.wifi.WifiStatusCode status);
+  oneway void onStart();
+  oneway void onStop();
+  oneway void onSubsystemRestart(in android.hardware.wifi.WifiStatusCode status);
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiNanIface.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiNanIface.aidl
new file mode 100644
index 0000000..070ca24
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiNanIface.aidl
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiNanIface {
+  String getName();
+  void configRequest(in char cmdId, in android.hardware.wifi.NanConfigRequest msg1, in android.hardware.wifi.NanConfigRequestSupplemental msg2);
+  void createDataInterfaceRequest(in char cmdId, in String ifaceName);
+  void deleteDataInterfaceRequest(in char cmdId, in String ifaceName);
+  void disableRequest(in char cmdId);
+  void enableRequest(in char cmdId, in android.hardware.wifi.NanEnableRequest msg1, in android.hardware.wifi.NanConfigRequestSupplemental msg2);
+  void getCapabilitiesRequest(in char cmdId);
+  void initiateDataPathRequest(in char cmdId, in android.hardware.wifi.NanInitiateDataPathRequest msg);
+  void registerEventCallback(in android.hardware.wifi.IWifiNanIfaceEventCallback callback);
+  void respondToDataPathIndicationRequest(in char cmdId, in android.hardware.wifi.NanRespondToDataPathIndicationRequest msg);
+  void startPublishRequest(in char cmdId, in android.hardware.wifi.NanPublishRequest msg);
+  void startSubscribeRequest(in char cmdId, in android.hardware.wifi.NanSubscribeRequest msg);
+  void stopPublishRequest(in char cmdId, in byte sessionId);
+  void stopSubscribeRequest(in char cmdId, in byte sessionId);
+  void terminateDataPathRequest(in char cmdId, in int ndpInstanceId);
+  void transmitFollowupRequest(in char cmdId, in android.hardware.wifi.NanTransmitFollowupRequest msg);
+  const int MIN_DATA_PATH_CONFIG_PASSPHRASE_LENGTH = 8;
+  const int MAX_DATA_PATH_CONFIG_PASSPHRASE_LENGTH = 63;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiNanIfaceEventCallback.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiNanIfaceEventCallback.aidl
new file mode 100644
index 0000000..591cd8c
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiNanIfaceEventCallback.aidl
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiNanIfaceEventCallback {
+  oneway void eventClusterEvent(in android.hardware.wifi.NanClusterEventInd event);
+  oneway void eventDataPathConfirm(in android.hardware.wifi.NanDataPathConfirmInd event);
+  oneway void eventDataPathRequest(in android.hardware.wifi.NanDataPathRequestInd event);
+  oneway void eventDataPathScheduleUpdate(in android.hardware.wifi.NanDataPathScheduleUpdateInd event);
+  oneway void eventDataPathTerminated(in int ndpInstanceId);
+  oneway void eventDisabled(in android.hardware.wifi.NanStatus status);
+  oneway void eventFollowupReceived(in android.hardware.wifi.NanFollowupReceivedInd event);
+  oneway void eventMatch(in android.hardware.wifi.NanMatchInd event);
+  oneway void eventMatchExpired(in byte discoverySessionId, in int peerId);
+  oneway void eventPublishTerminated(in byte sessionId, in android.hardware.wifi.NanStatus status);
+  oneway void eventSubscribeTerminated(in byte sessionId, in android.hardware.wifi.NanStatus status);
+  oneway void eventTransmitFollowup(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyCapabilitiesResponse(in char id, in android.hardware.wifi.NanStatus status, in android.hardware.wifi.NanCapabilities capabilities);
+  oneway void notifyConfigResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyCreateDataInterfaceResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyDeleteDataInterfaceResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyDisableResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyEnableResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyInitiateDataPathResponse(in char id, in android.hardware.wifi.NanStatus status, in int ndpInstanceId);
+  oneway void notifyRespondToDataPathIndicationResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyStartPublishResponse(in char id, in android.hardware.wifi.NanStatus status, in byte sessionId);
+  oneway void notifyStartSubscribeResponse(in char id, in android.hardware.wifi.NanStatus status, in byte sessionId);
+  oneway void notifyStopPublishResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyStopSubscribeResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyTerminateDataPathResponse(in char id, in android.hardware.wifi.NanStatus status);
+  oneway void notifyTransmitFollowupResponse(in char id, in android.hardware.wifi.NanStatus status);
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiP2pIface.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiP2pIface.aidl
new file mode 100644
index 0000000..5e9948e
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiP2pIface.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiP2pIface {
+  String getName();
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiRttController.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiRttController.aidl
new file mode 100644
index 0000000..730a055
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiRttController.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiRttController {
+  void disableResponder(in int cmdId);
+  void enableResponder(in int cmdId, in android.hardware.wifi.WifiChannelInfo channelHint, in int maxDurationInSeconds, in android.hardware.wifi.RttResponder info);
+  android.hardware.wifi.IWifiStaIface getBoundIface();
+  android.hardware.wifi.RttCapabilities getCapabilities();
+  android.hardware.wifi.RttResponder getResponderInfo();
+  void rangeCancel(in int cmdId, in android.hardware.wifi.MacAddress[] addrs);
+  void rangeRequest(in int cmdId, in android.hardware.wifi.RttConfig[] rttConfigs);
+  void registerEventCallback(in android.hardware.wifi.IWifiRttControllerEventCallback callback);
+  void setLci(in int cmdId, in android.hardware.wifi.RttLciInformation lci);
+  void setLcr(in int cmdId, in android.hardware.wifi.RttLcrInformation lcr);
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiRttControllerEventCallback.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiRttControllerEventCallback.aidl
new file mode 100644
index 0000000..a6a33fc
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiRttControllerEventCallback.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiRttControllerEventCallback {
+  oneway void onResults(in int cmdId, in android.hardware.wifi.RttResult[] results);
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiStaIface.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiStaIface.aidl
new file mode 100644
index 0000000..2f0dfa1
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiStaIface.aidl
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiStaIface {
+  String getName();
+  void configureRoaming(in android.hardware.wifi.StaRoamingConfig config);
+  void disableLinkLayerStatsCollection();
+  void enableLinkLayerStatsCollection(in boolean debug);
+  void enableNdOffload(in boolean enable);
+  android.hardware.wifi.StaApfPacketFilterCapabilities getApfPacketFilterCapabilities();
+  android.hardware.wifi.StaBackgroundScanCapabilities getBackgroundScanCapabilities();
+  android.hardware.wifi.IWifiStaIface.StaIfaceCapabilityMask getCapabilities();
+  android.hardware.wifi.WifiDebugRxPacketFateReport[] getDebugRxPacketFates();
+  android.hardware.wifi.WifiDebugTxPacketFateReport[] getDebugTxPacketFates();
+  byte[6] getFactoryMacAddress();
+  android.hardware.wifi.StaLinkLayerStats getLinkLayerStats();
+  android.hardware.wifi.StaRoamingCapabilities getRoamingCapabilities();
+  int[] getValidFrequenciesForBand(in android.hardware.wifi.WifiBand band);
+  void installApfPacketFilter(in byte[] program);
+  byte[] readApfPacketFilterData();
+  void registerEventCallback(in android.hardware.wifi.IWifiStaIfaceEventCallback callback);
+  void setMacAddress(in byte[6] mac);
+  void setRoamingState(in android.hardware.wifi.StaRoamingState state);
+  void setScanMode(in boolean enable);
+  void startBackgroundScan(in int cmdId, in android.hardware.wifi.StaBackgroundScanParameters params);
+  void startDebugPacketFateMonitoring();
+  void startRssiMonitoring(in int cmdId, in int maxRssi, in int minRssi);
+  void startSendingKeepAlivePackets(in int cmdId, in byte[] ipPacketData, in char etherType, in byte[6] srcAddress, in byte[6] dstAddress, in int periodInMs);
+  void stopBackgroundScan(in int cmdId);
+  void stopRssiMonitoring(in int cmdId);
+  void stopSendingKeepAlivePackets(in int cmdId);
+  @Backing(type="int") @VintfStability
+  enum StaIfaceCapabilityMask {
+    APF = 1,
+    BACKGROUND_SCAN = 2,
+    LINK_LAYER_STATS = 4,
+    RSSI_MONITOR = 8,
+    CONTROL_ROAMING = 16,
+    PROBE_IE_ALLOWLIST = 32,
+    SCAN_RAND = 64,
+    STA_5G = 128,
+    HOTSPOT = 256,
+    PNO = 512,
+    TDLS = 1024,
+    TDLS_OFFCHANNEL = 2048,
+    ND_OFFLOAD = 4096,
+    KEEP_ALIVE = 8192,
+    DEBUG_PACKET_FATE = 16384,
+  }
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiStaIfaceEventCallback.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiStaIfaceEventCallback.aidl
new file mode 100644
index 0000000..48b85b0
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IWifiStaIfaceEventCallback.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+interface IWifiStaIfaceEventCallback {
+  oneway void onBackgroundFullScanResult(in int cmdId, in int bucketsScanned, in android.hardware.wifi.StaScanResult result);
+  oneway void onBackgroundScanFailure(in int cmdId);
+  oneway void onBackgroundScanResults(in int cmdId, in android.hardware.wifi.StaScanData[] scanDatas);
+  oneway void onRssiThresholdBreached(in int cmdId, in byte[6] currBssid, in int currRssi);
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IfaceConcurrencyType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IfaceConcurrencyType.aidl
new file mode 100644
index 0000000..0a3ad1a
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IfaceConcurrencyType.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum IfaceConcurrencyType {
+  STA = 0,
+  AP = 1,
+  AP_BRIDGED = 2,
+  P2P = 3,
+  NAN_IFACE = 4,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IfaceType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IfaceType.aidl
new file mode 100644
index 0000000..dbdc439
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/IfaceType.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum IfaceType {
+  STA = 0,
+  AP = 1,
+  P2P = 2,
+  NAN_IFACE = 3,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/MacAddress.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/MacAddress.aidl
new file mode 100644
index 0000000..c4a0613
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/MacAddress.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable MacAddress {
+  byte[6] data;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanBandIndex.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanBandIndex.aidl
new file mode 100644
index 0000000..ca6c910
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanBandIndex.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanBandIndex {
+  NAN_BAND_24GHZ = 0,
+  NAN_BAND_5GHZ = 1,
+  NAN_BAND_6GHZ = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanBandSpecificConfig.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanBandSpecificConfig.aidl
new file mode 100644
index 0000000..57540b3
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanBandSpecificConfig.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanBandSpecificConfig {
+  byte rssiClose;
+  byte rssiMiddle;
+  byte rssiCloseProximity;
+  char dwellTimeMs;
+  char scanPeriodSec;
+  boolean validDiscoveryWindowIntervalVal;
+  byte discoveryWindowIntervalVal;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanCapabilities.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanCapabilities.aidl
new file mode 100644
index 0000000..c44654e
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanCapabilities.aidl
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanCapabilities {
+  int maxConcurrentClusters;
+  int maxPublishes;
+  int maxSubscribes;
+  int maxServiceNameLen;
+  int maxMatchFilterLen;
+  int maxTotalMatchFilterLen;
+  int maxServiceSpecificInfoLen;
+  int maxExtendedServiceSpecificInfoLen;
+  int maxNdiInterfaces;
+  int maxNdpSessions;
+  int maxAppInfoLen;
+  int maxQueuedTransmitFollowupMsgs;
+  int maxSubscribeInterfaceAddresses;
+  android.hardware.wifi.NanCipherSuiteType supportedCipherSuites;
+  boolean instantCommunicationModeSupportFlag;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanCipherSuiteType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanCipherSuiteType.aidl
new file mode 100644
index 0000000..4450956
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanCipherSuiteType.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanCipherSuiteType {
+  NONE = 0,
+  SHARED_KEY_128_MASK = 1,
+  SHARED_KEY_256_MASK = 2,
+  PUBLIC_KEY_128_MASK = 4,
+  PUBLIC_KEY_256_MASK = 8,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanClusterEventInd.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanClusterEventInd.aidl
new file mode 100644
index 0000000..7a3ff81
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanClusterEventInd.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanClusterEventInd {
+  android.hardware.wifi.NanClusterEventType eventType;
+  byte[6] addr;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanClusterEventType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanClusterEventType.aidl
new file mode 100644
index 0000000..1dfa45f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanClusterEventType.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanClusterEventType {
+  DISCOVERY_MAC_ADDRESS_CHANGED = 0,
+  STARTED_CLUSTER = 1,
+  JOINED_CLUSTER = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanConfigRequest.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanConfigRequest.aidl
new file mode 100644
index 0000000..5ead651
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanConfigRequest.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanConfigRequest {
+  byte masterPref;
+  boolean disableDiscoveryAddressChangeIndication;
+  boolean disableStartedClusterIndication;
+  boolean disableJoinedClusterIndication;
+  boolean includePublishServiceIdsInBeacon;
+  byte numberOfPublishServiceIdsInBeacon;
+  boolean includeSubscribeServiceIdsInBeacon;
+  byte numberOfSubscribeServiceIdsInBeacon;
+  char rssiWindowSize;
+  int macAddressRandomizationIntervalSec;
+  android.hardware.wifi.NanBandSpecificConfig[3] bandSpecificConfig;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanConfigRequestSupplemental.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanConfigRequestSupplemental.aidl
new file mode 100644
index 0000000..682699e
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanConfigRequestSupplemental.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanConfigRequestSupplemental {
+  int discoveryBeaconIntervalMs;
+  int numberOfSpatialStreamsInDiscovery;
+  boolean enableDiscoveryWindowEarlyTermination;
+  boolean enableRanging;
+  boolean enableInstantCommunicationMode;
+  int instantModeChannel;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathChannelCfg.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathChannelCfg.aidl
new file mode 100644
index 0000000..ce75288
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathChannelCfg.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanDataPathChannelCfg {
+  CHANNEL_NOT_REQUESTED = 0,
+  REQUEST_CHANNEL_SETUP = 1,
+  FORCE_CHANNEL_SETUP = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathChannelInfo.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathChannelInfo.aidl
new file mode 100644
index 0000000..d111db7
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathChannelInfo.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanDataPathChannelInfo {
+  int channelFreq;
+  android.hardware.wifi.WifiChannelWidthInMhz channelBandwidth;
+  int numSpatialStreams;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathConfirmInd.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathConfirmInd.aidl
new file mode 100644
index 0000000..2e1e2ca
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathConfirmInd.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanDataPathConfirmInd {
+  int ndpInstanceId;
+  boolean dataPathSetupSuccess;
+  byte[6] peerNdiMacAddr;
+  byte[] appInfo;
+  android.hardware.wifi.NanStatus status;
+  android.hardware.wifi.NanDataPathChannelInfo[] channelInfo;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathRequestInd.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathRequestInd.aidl
new file mode 100644
index 0000000..74d5b73
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathRequestInd.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanDataPathRequestInd {
+  byte discoverySessionId;
+  byte[6] peerDiscMacAddr;
+  int ndpInstanceId;
+  boolean securityRequired;
+  byte[] appInfo;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathScheduleUpdateInd.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathScheduleUpdateInd.aidl
new file mode 100644
index 0000000..5fabf55
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathScheduleUpdateInd.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanDataPathScheduleUpdateInd {
+  byte[6] peerDiscoveryAddress;
+  android.hardware.wifi.NanDataPathChannelInfo[] channelInfo;
+  int[] ndpInstanceIds;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathSecurityConfig.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathSecurityConfig.aidl
new file mode 100644
index 0000000..635dbce
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathSecurityConfig.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanDataPathSecurityConfig {
+  android.hardware.wifi.NanDataPathSecurityType securityType;
+  android.hardware.wifi.NanCipherSuiteType cipherType;
+  byte[32] pmk;
+  byte[] passphrase;
+  byte[16] scid;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathSecurityType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathSecurityType.aidl
new file mode 100644
index 0000000..64288ca
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDataPathSecurityType.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanDataPathSecurityType {
+  OPEN = 0,
+  PMK = 1,
+  PASSPHRASE = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDebugConfig.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDebugConfig.aidl
new file mode 100644
index 0000000..b84d891
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDebugConfig.aidl
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanDebugConfig {
+  boolean validClusterIdVals;
+  char clusterIdBottomRangeVal;
+  char clusterIdTopRangeVal;
+  boolean validIntfAddrVal;
+  byte[6] intfAddrVal;
+  boolean validOuiVal;
+  int ouiVal;
+  boolean validRandomFactorForceVal;
+  byte randomFactorForceVal;
+  boolean validHopCountForceVal;
+  byte hopCountForceVal;
+  boolean validDiscoveryChannelVal;
+  int[3] discoveryChannelMhzVal;
+  boolean validUseBeaconsInBandVal;
+  boolean[3] useBeaconsInBandVal;
+  boolean validUseSdfInBandVal;
+  boolean[3] useSdfInBandVal;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDiscoveryCommonConfig.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDiscoveryCommonConfig.aidl
new file mode 100644
index 0000000..761cdbb
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanDiscoveryCommonConfig.aidl
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanDiscoveryCommonConfig {
+  byte sessionId;
+  char ttlSec;
+  char discoveryWindowPeriod;
+  byte discoveryCount;
+  byte[] serviceName;
+  android.hardware.wifi.NanMatchAlg discoveryMatchIndicator;
+  byte[] serviceSpecificInfo;
+  byte[] extendedServiceSpecificInfo;
+  byte[] rxMatchFilter;
+  byte[] txMatchFilter;
+  boolean useRssiThreshold;
+  boolean disableDiscoveryTerminationIndication;
+  boolean disableMatchExpirationIndication;
+  boolean disableFollowupReceivedIndication;
+  android.hardware.wifi.NanDataPathSecurityConfig securityConfig;
+  boolean rangingRequired;
+  int rangingIntervalMs;
+  android.hardware.wifi.NanRangingIndication configRangingIndications;
+  char distanceIngressCm;
+  char distanceEgressCm;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanEnableRequest.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanEnableRequest.aidl
new file mode 100644
index 0000000..eaa009c
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanEnableRequest.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanEnableRequest {
+  boolean[3] operateInBand;
+  byte hopCountMax;
+  android.hardware.wifi.NanConfigRequest configParams;
+  android.hardware.wifi.NanDebugConfig debugConfigs;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanFollowupReceivedInd.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanFollowupReceivedInd.aidl
new file mode 100644
index 0000000..743ad9d
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanFollowupReceivedInd.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanFollowupReceivedInd {
+  byte discoverySessionId;
+  int peerId;
+  byte[6] addr;
+  boolean receivedInFaw;
+  byte[] serviceSpecificInfo;
+  byte[] extendedServiceSpecificInfo;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanInitiateDataPathRequest.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanInitiateDataPathRequest.aidl
new file mode 100644
index 0000000..697e29a
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanInitiateDataPathRequest.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanInitiateDataPathRequest {
+  int peerId;
+  byte[6] peerDiscMacAddr;
+  android.hardware.wifi.NanDataPathChannelCfg channelRequestType;
+  int channel;
+  String ifaceName;
+  android.hardware.wifi.NanDataPathSecurityConfig securityConfig;
+  byte[] appInfo;
+  byte[] serviceNameOutOfBand;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanMatchAlg.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanMatchAlg.aidl
new file mode 100644
index 0000000..dab33ad
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanMatchAlg.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanMatchAlg {
+  MATCH_ONCE = 0,
+  MATCH_CONTINUOUS = 1,
+  MATCH_NEVER = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanMatchInd.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanMatchInd.aidl
new file mode 100644
index 0000000..ae430c4
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanMatchInd.aidl
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanMatchInd {
+  byte discoverySessionId;
+  int peerId;
+  byte[6] addr;
+  byte[] serviceSpecificInfo;
+  byte[] extendedServiceSpecificInfo;
+  byte[] matchFilter;
+  boolean matchOccurredInBeaconFlag;
+  boolean outOfResourceFlag;
+  byte rssiValue;
+  android.hardware.wifi.NanCipherSuiteType peerCipherType;
+  boolean peerRequiresSecurityEnabledInNdp;
+  boolean peerRequiresRanging;
+  int rangingMeasurementInMm;
+  android.hardware.wifi.NanRangingIndication rangingIndicationType;
+  byte[] scid;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanPublishRequest.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanPublishRequest.aidl
new file mode 100644
index 0000000..d8d6b1b
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanPublishRequest.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanPublishRequest {
+  android.hardware.wifi.NanDiscoveryCommonConfig baseConfigs;
+  android.hardware.wifi.NanPublishType publishType;
+  android.hardware.wifi.NanTxType txType;
+  boolean autoAcceptDataPathRequests;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanPublishType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanPublishType.aidl
new file mode 100644
index 0000000..fc9b7a0
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanPublishType.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanPublishType {
+  UNSOLICITED = 0,
+  SOLICITED = 1,
+  UNSOLICITED_SOLICITED = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanRangingIndication.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanRangingIndication.aidl
new file mode 100644
index 0000000..d03dffc
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanRangingIndication.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanRangingIndication {
+  CONTINUOUS_INDICATION_MASK = 1,
+  INGRESS_MET_MASK = 2,
+  EGRESS_MET_MASK = 4,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanRespondToDataPathIndicationRequest.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanRespondToDataPathIndicationRequest.aidl
new file mode 100644
index 0000000..5542ff6
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanRespondToDataPathIndicationRequest.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanRespondToDataPathIndicationRequest {
+  boolean acceptRequest;
+  int ndpInstanceId;
+  String ifaceName;
+  android.hardware.wifi.NanDataPathSecurityConfig securityConfig;
+  byte[] appInfo;
+  byte[] serviceNameOutOfBand;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSrfType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSrfType.aidl
new file mode 100644
index 0000000..3c0583c
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSrfType.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanSrfType {
+  BLOOM_FILTER = 0,
+  PARTIAL_MAC_ADDR = 1,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanStatus.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanStatus.aidl
new file mode 100644
index 0000000..834558a
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanStatus.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanStatus {
+  android.hardware.wifi.NanStatusCode status;
+  String description;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanStatusCode.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanStatusCode.aidl
new file mode 100644
index 0000000..9eaf518
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanStatusCode.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanStatusCode {
+  SUCCESS = 0,
+  INTERNAL_FAILURE = 1,
+  PROTOCOL_FAILURE = 2,
+  INVALID_SESSION_ID = 3,
+  NO_RESOURCES_AVAILABLE = 4,
+  INVALID_ARGS = 5,
+  INVALID_PEER_ID = 6,
+  INVALID_NDP_ID = 7,
+  NAN_NOT_ALLOWED = 8,
+  NO_OTA_ACK = 9,
+  ALREADY_ENABLED = 10,
+  FOLLOWUP_TX_QUEUE_FULL = 11,
+  UNSUPPORTED_CONCURRENCY_NAN_DISABLED = 12,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSubscribeRequest.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSubscribeRequest.aidl
new file mode 100644
index 0000000..bf176a5
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSubscribeRequest.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanSubscribeRequest {
+  android.hardware.wifi.NanDiscoveryCommonConfig baseConfigs;
+  android.hardware.wifi.NanSubscribeType subscribeType;
+  android.hardware.wifi.NanSrfType srfType;
+  boolean srfRespondIfInAddressSet;
+  boolean shouldUseSrf;
+  boolean isSsiRequiredForMatch;
+  android.hardware.wifi.MacAddress[] intfAddr;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSubscribeType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSubscribeType.aidl
new file mode 100644
index 0000000..325e40b
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanSubscribeType.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanSubscribeType {
+  PASSIVE = 0,
+  ACTIVE = 1,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanTransmitFollowupRequest.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanTransmitFollowupRequest.aidl
new file mode 100644
index 0000000..20c94d9
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanTransmitFollowupRequest.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable NanTransmitFollowupRequest {
+  byte discoverySessionId;
+  int peerId;
+  byte[6] addr;
+  boolean isHighPriority;
+  boolean shouldUseDiscoveryWindow;
+  byte[] serviceSpecificInfo;
+  byte[] extendedServiceSpecificInfo;
+  boolean disableFollowupResultIndication;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanTxType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanTxType.aidl
new file mode 100644
index 0000000..6f7696f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/NanTxType.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum NanTxType {
+  BROADCAST = 0,
+  UNICAST = 1,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttBw.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttBw.aidl
new file mode 100644
index 0000000..bd7efff
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttBw.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum RttBw {
+  BW_5MHZ = 1,
+  BW_10MHZ = 2,
+  BW_20MHZ = 4,
+  BW_40MHZ = 8,
+  BW_80MHZ = 16,
+  BW_160MHZ = 32,
+  BW_320MHZ = 64,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttCapabilities.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttCapabilities.aidl
new file mode 100644
index 0000000..cf64687
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttCapabilities.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable RttCapabilities {
+  boolean rttOneSidedSupported;
+  boolean rttFtmSupported;
+  boolean lciSupported;
+  boolean lcrSupported;
+  boolean responderSupported;
+  android.hardware.wifi.RttPreamble preambleSupport;
+  android.hardware.wifi.RttBw bwSupport;
+  byte mcVersion;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttConfig.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttConfig.aidl
new file mode 100644
index 0000000..ccdf2ce
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttConfig.aidl
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable RttConfig {
+  byte[6] addr;
+  android.hardware.wifi.RttType type;
+  android.hardware.wifi.RttPeerType peer;
+  android.hardware.wifi.WifiChannelInfo channel;
+  int burstPeriod;
+  int numBurst;
+  int numFramesPerBurst;
+  int numRetriesPerRttFrame;
+  int numRetriesPerFtmr;
+  boolean mustRequestLci;
+  boolean mustRequestLcr;
+  int burstDuration;
+  android.hardware.wifi.RttPreamble preamble;
+  android.hardware.wifi.RttBw bw;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttLciInformation.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttLciInformation.aidl
new file mode 100644
index 0000000..0fcf151
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttLciInformation.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable RttLciInformation {
+  long latitude;
+  long longitude;
+  int altitude;
+  byte latitudeUnc;
+  byte longitudeUnc;
+  byte altitudeUnc;
+  android.hardware.wifi.RttMotionPattern motionPattern;
+  int floor;
+  int heightAboveFloor;
+  int heightUnc;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttLcrInformation.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttLcrInformation.aidl
new file mode 100644
index 0000000..c756dda
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttLcrInformation.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable RttLcrInformation {
+  byte[2] countryCode;
+  String civicInfo;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttMotionPattern.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttMotionPattern.aidl
new file mode 100644
index 0000000..7c8e369
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttMotionPattern.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum RttMotionPattern {
+  NOT_EXPECTED = 0,
+  EXPECTED = 1,
+  UNKNOWN = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttPeerType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttPeerType.aidl
new file mode 100644
index 0000000..23fa7f6
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttPeerType.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum RttPeerType {
+  AP = 1,
+  STA = 2,
+  P2P_GO = 3,
+  P2P_CLIENT = 4,
+  NAN_TYPE = 5,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttPreamble.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttPreamble.aidl
new file mode 100644
index 0000000..02e6479
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttPreamble.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum RttPreamble {
+  LEGACY = 1,
+  HT = 2,
+  VHT = 4,
+  HE = 8,
+  EHT = 16,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttResponder.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttResponder.aidl
new file mode 100644
index 0000000..41463b5
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttResponder.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable RttResponder {
+  android.hardware.wifi.WifiChannelInfo channel;
+  android.hardware.wifi.RttPreamble preamble;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttResult.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttResult.aidl
new file mode 100644
index 0000000..743e0bd
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttResult.aidl
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable RttResult {
+  byte[6] addr;
+  int burstNum;
+  int measurementNumber;
+  int successNumber;
+  byte numberPerBurstPeer;
+  android.hardware.wifi.RttStatus status;
+  byte retryAfterDuration;
+  android.hardware.wifi.RttType type;
+  int rssi;
+  int rssiSpread;
+  android.hardware.wifi.WifiRateInfo txRate;
+  android.hardware.wifi.WifiRateInfo rxRate;
+  long rtt;
+  long rttSd;
+  long rttSpread;
+  int distanceInMm;
+  int distanceSdInMm;
+  int distanceSpreadInMm;
+  long timeStampInUs;
+  int burstDurationInMs;
+  int negotiatedBurstNum;
+  android.hardware.wifi.WifiInformationElement lci;
+  android.hardware.wifi.WifiInformationElement lcr;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttStatus.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttStatus.aidl
new file mode 100644
index 0000000..2817497
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttStatus.aidl
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum RttStatus {
+  SUCCESS = 0,
+  FAILURE = 1,
+  FAIL_NO_RSP = 2,
+  FAIL_REJECTED = 3,
+  FAIL_NOT_SCHEDULED_YET = 4,
+  FAIL_TM_TIMEOUT = 5,
+  FAIL_AP_ON_DIFF_CHANNEL = 6,
+  FAIL_NO_CAPABILITY = 7,
+  ABORTED = 8,
+  FAIL_INVALID_TS = 9,
+  FAIL_PROTOCOL = 10,
+  FAIL_SCHEDULE = 11,
+  FAIL_BUSY_TRY_LATER = 12,
+  INVALID_REQ = 13,
+  NO_WIFI = 14,
+  FAIL_FTM_PARAM_OVERRIDE = 15,
+  NAN_RANGING_PROTOCOL_FAILURE = 16,
+  NAN_RANGING_CONCURRENCY_NOT_SUPPORTED = 17,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttType.aidl
new file mode 100644
index 0000000..2b6087a
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/RttType.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum RttType {
+  ONE_SIDED = 1,
+  TWO_SIDED = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/Ssid.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/Ssid.aidl
new file mode 100644
index 0000000..98b523f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/Ssid.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable Ssid {
+  byte[32] data;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaApfPacketFilterCapabilities.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaApfPacketFilterCapabilities.aidl
new file mode 100644
index 0000000..3b4d785
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaApfPacketFilterCapabilities.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaApfPacketFilterCapabilities {
+  int version;
+  int maxLength;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanBucketEventReportSchemeMask.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanBucketEventReportSchemeMask.aidl
new file mode 100644
index 0000000..1041dd7
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanBucketEventReportSchemeMask.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum StaBackgroundScanBucketEventReportSchemeMask {
+  EACH_SCAN = 1,
+  FULL_RESULTS = 2,
+  NO_BATCH = 4,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanBucketParameters.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanBucketParameters.aidl
new file mode 100644
index 0000000..b49d406
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanBucketParameters.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaBackgroundScanBucketParameters {
+  int bucketIdx;
+  android.hardware.wifi.WifiBand band;
+  int[] frequencies;
+  int periodInMs;
+  android.hardware.wifi.StaBackgroundScanBucketEventReportSchemeMask eventReportScheme;
+  int exponentialMaxPeriodInMs;
+  int exponentialBase;
+  int exponentialStepCount;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanCapabilities.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanCapabilities.aidl
new file mode 100644
index 0000000..758dd97
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanCapabilities.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaBackgroundScanCapabilities {
+  int maxCacheSize;
+  int maxBuckets;
+  int maxApCachePerScan;
+  int maxReportingThreshold;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanLimits.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanLimits.aidl
new file mode 100644
index 0000000..05d0277
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanLimits.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum StaBackgroundScanLimits {
+  MAX_CHANNELS = 16,
+  MAX_BUCKETS = 16,
+  MAX_AP_CACHE_PER_SCAN = 32,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanParameters.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanParameters.aidl
new file mode 100644
index 0000000..0773566
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaBackgroundScanParameters.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaBackgroundScanParameters {
+  int basePeriodInMs;
+  int maxApPerScan;
+  int reportThresholdPercent;
+  int reportThresholdNumScans;
+  android.hardware.wifi.StaBackgroundScanBucketParameters[] buckets;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfaceContentionTimeStats.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfaceContentionTimeStats.aidl
new file mode 100644
index 0000000..4dee6de
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfaceContentionTimeStats.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaLinkLayerIfaceContentionTimeStats {
+  int contentionTimeMinInUsec;
+  int contentionTimeMaxInUsec;
+  int contentionTimeAvgInUsec;
+  int contentionNumSamples;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfacePacketStats.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfacePacketStats.aidl
new file mode 100644
index 0000000..eddf52e
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfacePacketStats.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaLinkLayerIfacePacketStats {
+  long rxMpdu;
+  long txMpdu;
+  long lostMpdu;
+  long retries;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfaceStats.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfaceStats.aidl
new file mode 100644
index 0000000..cf68fc6
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerIfaceStats.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaLinkLayerIfaceStats {
+  int beaconRx;
+  int avgRssiMgmt;
+  android.hardware.wifi.StaLinkLayerIfacePacketStats wmeBePktStats;
+  android.hardware.wifi.StaLinkLayerIfacePacketStats wmeBkPktStats;
+  android.hardware.wifi.StaLinkLayerIfacePacketStats wmeViPktStats;
+  android.hardware.wifi.StaLinkLayerIfacePacketStats wmeVoPktStats;
+  byte timeSliceDutyCycleInPercent;
+  android.hardware.wifi.StaLinkLayerIfaceContentionTimeStats wmeBeContentionTimeStats;
+  android.hardware.wifi.StaLinkLayerIfaceContentionTimeStats wmeBkContentionTimeStats;
+  android.hardware.wifi.StaLinkLayerIfaceContentionTimeStats wmeViContentionTimeStats;
+  android.hardware.wifi.StaLinkLayerIfaceContentionTimeStats wmeVoContentionTimeStats;
+  android.hardware.wifi.StaPeerInfo[] peers;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerRadioStats.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerRadioStats.aidl
new file mode 100644
index 0000000..84d24c9
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerRadioStats.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaLinkLayerRadioStats {
+  int onTimeInMs;
+  int txTimeInMs;
+  int[] txTimeInMsPerLevel;
+  int rxTimeInMs;
+  int onTimeInMsForScan;
+  int onTimeInMsForNanScan;
+  int onTimeInMsForBgScan;
+  int onTimeInMsForRoamScan;
+  int onTimeInMsForPnoScan;
+  int onTimeInMsForHs20Scan;
+  android.hardware.wifi.WifiChannelStats[] channelStats;
+  int radioId;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerStats.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerStats.aidl
new file mode 100644
index 0000000..9c05346
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaLinkLayerStats.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaLinkLayerStats {
+  android.hardware.wifi.StaLinkLayerIfaceStats iface;
+  android.hardware.wifi.StaLinkLayerRadioStats[] radios;
+  long timeStampInMs;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaPeerInfo.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaPeerInfo.aidl
new file mode 100644
index 0000000..93a901f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaPeerInfo.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaPeerInfo {
+  char staCount;
+  char chanUtil;
+  android.hardware.wifi.StaRateStat[] rateStats;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRateStat.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRateStat.aidl
new file mode 100644
index 0000000..43b69fc
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRateStat.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaRateStat {
+  android.hardware.wifi.WifiRateInfo rateInfo;
+  int txMpdu;
+  int rxMpdu;
+  int mpduLost;
+  int retries;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingCapabilities.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingCapabilities.aidl
new file mode 100644
index 0000000..9eed877
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingCapabilities.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaRoamingCapabilities {
+  int maxBlocklistSize;
+  int maxAllowlistSize;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingConfig.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingConfig.aidl
new file mode 100644
index 0000000..2b37cee
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingConfig.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaRoamingConfig {
+  android.hardware.wifi.MacAddress[] bssidBlocklist;
+  android.hardware.wifi.Ssid[] ssidAllowlist;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingState.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingState.aidl
new file mode 100644
index 0000000..1f3d91f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaRoamingState.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="byte") @VintfStability
+enum StaRoamingState {
+  DISABLED = 0,
+  ENABLED = 1,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanData.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanData.aidl
new file mode 100644
index 0000000..5903760
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanData.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaScanData {
+  android.hardware.wifi.StaScanDataFlagMask flags;
+  int bucketsScanned;
+  android.hardware.wifi.StaScanResult[] results;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanDataFlagMask.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanDataFlagMask.aidl
new file mode 100644
index 0000000..dc8f2f1
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanDataFlagMask.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum StaScanDataFlagMask {
+  INTERRUPTED = 1,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanResult.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanResult.aidl
new file mode 100644
index 0000000..9a8d297
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/StaScanResult.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable StaScanResult {
+  long timeStampInUs;
+  byte[] ssid;
+  byte[6] bssid;
+  int rssi;
+  int frequency;
+  char beaconPeriodInMs;
+  char capability;
+  android.hardware.wifi.WifiInformationElement[] informationElements;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiAntennaMode.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiAntennaMode.aidl
new file mode 100644
index 0000000..b47b7f5
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiAntennaMode.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiAntennaMode {
+  WIFI_ANTENNA_MODE_UNSPECIFIED = 0,
+  WIFI_ANTENNA_MODE_1X1 = 1,
+  WIFI_ANTENNA_MODE_2X2 = 2,
+  WIFI_ANTENNA_MODE_3X3 = 3,
+  WIFI_ANTENNA_MODE_4X4 = 4,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiBand.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiBand.aidl
new file mode 100644
index 0000000..e9a87ee
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiBand.aidl
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiBand {
+  BAND_UNSPECIFIED = 0,
+  BAND_24GHZ = 1,
+  BAND_5GHZ = 2,
+  BAND_5GHZ_DFS = 4,
+  BAND_5GHZ_WITH_DFS = 6,
+  BAND_24GHZ_5GHZ = 3,
+  BAND_24GHZ_5GHZ_WITH_DFS = 7,
+  BAND_6GHZ = 8,
+  BAND_5GHZ_6GHZ = 10,
+  BAND_24GHZ_5GHZ_6GHZ = 11,
+  BAND_24GHZ_5GHZ_WITH_DFS_6GHZ = 15,
+  BAND_60GHZ = 16,
+  BAND_24GHZ_5GHZ_6GHZ_60GHZ = 27,
+  BAND_24GHZ_5GHZ_WITH_DFS_6GHZ_60GHZ = 31,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelInfo.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelInfo.aidl
new file mode 100644
index 0000000..297c923
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelInfo.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiChannelInfo {
+  android.hardware.wifi.WifiChannelWidthInMhz width;
+  int centerFreq;
+  int centerFreq0;
+  int centerFreq1;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelStats.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelStats.aidl
new file mode 100644
index 0000000..c6e7acc
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelStats.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiChannelStats {
+  android.hardware.wifi.WifiChannelInfo channel;
+  int onTimeInMs;
+  int ccaBusyTimeInMs;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelWidthInMhz.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelWidthInMhz.aidl
new file mode 100644
index 0000000..8c45044
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiChannelWidthInMhz.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiChannelWidthInMhz {
+  WIDTH_INVALID = -1,
+  WIDTH_20 = 0,
+  WIDTH_40 = 1,
+  WIDTH_80 = 2,
+  WIDTH_160 = 3,
+  WIDTH_80P80 = 4,
+  WIDTH_5 = 5,
+  WIDTH_10 = 6,
+  WIDTH_320 = 7,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxIcmpPacketDetails.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxIcmpPacketDetails.aidl
new file mode 100644
index 0000000..8415e09
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxIcmpPacketDetails.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugHostWakeReasonRxIcmpPacketDetails {
+  int icmpPkt;
+  int icmp6Pkt;
+  int icmp6Ra;
+  int icmp6Na;
+  int icmp6Ns;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxMulticastPacketDetails.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxMulticastPacketDetails.aidl
new file mode 100644
index 0000000..30301d3
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxMulticastPacketDetails.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugHostWakeReasonRxMulticastPacketDetails {
+  int ipv4RxMulticastAddrCnt;
+  int ipv6RxMulticastAddrCnt;
+  int otherRxMulticastAddrCnt;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxPacketDetails.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxPacketDetails.aidl
new file mode 100644
index 0000000..8118322
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonRxPacketDetails.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugHostWakeReasonRxPacketDetails {
+  int rxUnicastCnt;
+  int rxMulticastCnt;
+  int rxBroadcastCnt;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonStats.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonStats.aidl
new file mode 100644
index 0000000..1766476
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugHostWakeReasonStats.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugHostWakeReasonStats {
+  int totalCmdEventWakeCnt;
+  int[] cmdEventWakeCntPerType;
+  int totalDriverFwLocalWakeCnt;
+  int[] driverFwLocalWakeCntPerType;
+  int totalRxPacketWakeCnt;
+  android.hardware.wifi.WifiDebugHostWakeReasonRxPacketDetails rxPktWakeDetails;
+  android.hardware.wifi.WifiDebugHostWakeReasonRxMulticastPacketDetails rxMulticastPkWakeDetails;
+  android.hardware.wifi.WifiDebugHostWakeReasonRxIcmpPacketDetails rxIcmpPkWakeDetails;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugPacketFateFrameInfo.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugPacketFateFrameInfo.aidl
new file mode 100644
index 0000000..2ff6cfc
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugPacketFateFrameInfo.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugPacketFateFrameInfo {
+  android.hardware.wifi.WifiDebugPacketFateFrameType frameType;
+  long frameLen;
+  long driverTimestampUsec;
+  long firmwareTimestampUsec;
+  byte[] frameContent;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugPacketFateFrameType.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugPacketFateFrameType.aidl
new file mode 100644
index 0000000..ee26f2e
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugPacketFateFrameType.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiDebugPacketFateFrameType {
+  UNKNOWN = 0,
+  ETHERNET_II = 1,
+  MGMT_80211 = 2,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferFlags.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferFlags.aidl
new file mode 100644
index 0000000..f210e82
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferFlags.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiDebugRingBufferFlags {
+  HAS_BINARY_ENTRIES = 1,
+  HAS_ASCII_ENTRIES = 2,
+  HAS_PER_PACKET_ENTRIES = 4,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferStatus.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferStatus.aidl
new file mode 100644
index 0000000..e4249d9
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferStatus.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugRingBufferStatus {
+  String ringName;
+  int flags;
+  int ringId;
+  int sizeInBytes;
+  int freeSizeInBytes;
+  int verboseLevel;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferVerboseLevel.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferVerboseLevel.aidl
new file mode 100644
index 0000000..e614f3f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRingBufferVerboseLevel.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiDebugRingBufferVerboseLevel {
+  NONE = 0,
+  DEFAULT = 1,
+  VERBOSE = 2,
+  EXCESSIVE = 3,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRxPacketFate.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRxPacketFate.aidl
new file mode 100644
index 0000000..75abb4e
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRxPacketFate.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiDebugRxPacketFate {
+  SUCCESS = 0,
+  FW_QUEUED = 1,
+  FW_DROP_FILTER = 2,
+  FW_DROP_INVALID = 3,
+  FW_DROP_NOBUFS = 4,
+  FW_DROP_OTHER = 5,
+  DRV_QUEUED = 6,
+  DRV_DROP_FILTER = 7,
+  DRV_DROP_INVALID = 8,
+  DRV_DROP_NOBUFS = 9,
+  DRV_DROP_OTHER = 10,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRxPacketFateReport.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRxPacketFateReport.aidl
new file mode 100644
index 0000000..bfe0c0a
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugRxPacketFateReport.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugRxPacketFateReport {
+  android.hardware.wifi.WifiDebugRxPacketFate fate;
+  android.hardware.wifi.WifiDebugPacketFateFrameInfo frameInfo;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugTxPacketFate.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugTxPacketFate.aidl
new file mode 100644
index 0000000..e360c2c
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugTxPacketFate.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiDebugTxPacketFate {
+  ACKED = 0,
+  SENT = 1,
+  FW_QUEUED = 2,
+  FW_DROP_INVALID = 3,
+  FW_DROP_NOBUFS = 4,
+  FW_DROP_OTHER = 5,
+  DRV_QUEUED = 6,
+  DRV_DROP_INVALID = 7,
+  DRV_DROP_NOBUFS = 8,
+  DRV_DROP_OTHER = 9,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugTxPacketFateReport.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugTxPacketFateReport.aidl
new file mode 100644
index 0000000..aee5c31
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiDebugTxPacketFateReport.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiDebugTxPacketFateReport {
+  android.hardware.wifi.WifiDebugTxPacketFate fate;
+  android.hardware.wifi.WifiDebugPacketFateFrameInfo frameInfo;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiIfaceMode.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiIfaceMode.aidl
new file mode 100644
index 0000000..e2fe57a
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiIfaceMode.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiIfaceMode {
+  IFACE_MODE_STA = 1,
+  IFACE_MODE_SOFTAP = 2,
+  IFACE_MODE_IBSS = 4,
+  IFACE_MODE_P2P_CLIENT = 8,
+  IFACE_MODE_P2P_GO = 16,
+  IFACE_MODE_NAN = 32,
+  IFACE_MODE_MESH = 64,
+  IFACE_MODE_TDLS = 128,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiInformationElement.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiInformationElement.aidl
new file mode 100644
index 0000000..27ba0db
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiInformationElement.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiInformationElement {
+  byte id;
+  byte[] data;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioCombination.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioCombination.aidl
new file mode 100644
index 0000000..f060db8
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioCombination.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiRadioCombination {
+  android.hardware.wifi.WifiRadioConfiguration[] radioConfigurations;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioCombinationMatrix.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioCombinationMatrix.aidl
new file mode 100644
index 0000000..ea86c4f
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioCombinationMatrix.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiRadioCombinationMatrix {
+  android.hardware.wifi.WifiRadioCombination[] radioCombinations;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioConfiguration.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioConfiguration.aidl
new file mode 100644
index 0000000..5169351
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRadioConfiguration.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiRadioConfiguration {
+  android.hardware.wifi.WifiBand bandInfo;
+  android.hardware.wifi.WifiAntennaMode antennaMode;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRateInfo.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRateInfo.aidl
new file mode 100644
index 0000000..c4aca63
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRateInfo.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiRateInfo {
+  android.hardware.wifi.WifiRatePreamble preamble;
+  android.hardware.wifi.WifiRateNss nss;
+  android.hardware.wifi.WifiChannelWidthInMhz bw;
+  byte rateMcsIdx;
+  int bitRateInKbps;
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRateNss.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRateNss.aidl
new file mode 100644
index 0000000..0ad6f04
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRateNss.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiRateNss {
+  NSS_1x1 = 0,
+  NSS_2x2 = 1,
+  NSS_3x3 = 2,
+  NSS_4x4 = 3,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRatePreamble.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRatePreamble.aidl
new file mode 100644
index 0000000..04b6358
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiRatePreamble.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiRatePreamble {
+  OFDM = 0,
+  CCK = 1,
+  HT = 2,
+  VHT = 3,
+  RESERVED = 4,
+  HE = 5,
+  EHT = 6,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiStatusCode.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiStatusCode.aidl
new file mode 100644
index 0000000..f27661c
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiStatusCode.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@Backing(type="int") @VintfStability
+enum WifiStatusCode {
+  SUCCESS = 0,
+  ERROR_WIFI_CHIP_INVALID = 1,
+  ERROR_WIFI_IFACE_INVALID = 2,
+  ERROR_WIFI_RTT_CONTROLLER_INVALID = 3,
+  ERROR_NOT_SUPPORTED = 4,
+  ERROR_NOT_AVAILABLE = 5,
+  ERROR_NOT_STARTED = 6,
+  ERROR_INVALID_ARGS = 7,
+  ERROR_BUSY = 8,
+  ERROR_UNKNOWN = 9,
+}
diff --git a/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiUsableChannel.aidl b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiUsableChannel.aidl
new file mode 100644
index 0000000..94e3a8a
--- /dev/null
+++ b/wifi/aidl/aidl_api/android.hardware.wifi/current/android/hardware/wifi/WifiUsableChannel.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.wifi;
+@VintfStability
+parcelable WifiUsableChannel {
+  int channel;
+  android.hardware.wifi.WifiChannelWidthInMhz channelBandwidth;
+  android.hardware.wifi.WifiIfaceMode ifaceModeMask;
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifi.aidl b/wifi/aidl/android/hardware/wifi/IWifi.aidl
new file mode 100644
index 0000000..1d86421
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifi.aidl
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.IWifiChip;
+import android.hardware.wifi.IWifiEventCallback;
+
+/**
+ * This is the root of the HAL module and is the interface returned when
+ * loading an implementation of the Wi-Fi HAL. There must be at most one
+ * module loaded in the system.
+ */
+@VintfStability
+interface IWifi {
+    /**
+     * Gets an AIDL interface object for the chip corresponding to the
+     * provided chipId.
+     *
+     * @param chipId ID of the chip.
+     * @return AIDL interface object representing the chip.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.NOT_STARTED|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    @PropagateAllowBlocking IWifiChip getChip(int chipId);
+
+    /**
+     * Retrieves the list of all chip id's on the device.
+     * The corresponding |IWifiChip| object for any chip can be
+     * retrieved using the |getChip| method.
+     *
+     * @return List of all chip id's on the device.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.NOT_STARTED|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    int[] getChipIds();
+
+    /**
+     * Get the current state of the HAL.
+     *
+     * @return true if started, false otherwise.
+     */
+    boolean isStarted();
+
+    /**
+     * Requests notifications of significant HAL events. Multiple calls to
+     * this must register multiple callbacks, each of which must receive all
+     * events. |IWifiEventCallback| object registration must be independent of the
+     * state of the rest of the HAL and must persist though stops/starts. These
+     * objects must be deleted when the corresponding client process is dead.
+     *
+     * @param callback An instance of the |IWifiEventCallback| AIDL interface
+     *        object.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void registerEventCallback(in IWifiEventCallback callback);
+
+    /**
+     * Perform any setup that is required to make use of the module.
+     * If the module is already started then this must be a noop.
+     * Must trigger |IWifiEventCallback.onStart| on success.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void start();
+
+    /**
+     * Tear down any state, ongoing commands, etc. If the module is already
+     * stopped then this must be a noop. After calling this, all |IWifiChip|
+     * objects will be considered invalid.
+     * Must trigger |IWifiEventCallback.onStop| on success.
+     * Must trigger |IWifiEventCallback.onFailure| on failure.
+     *
+     * Calling stop() and then start() is a valid way of resetting state in
+     * the HAL, driver, and firmware.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.NOT_STARTED|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void stop();
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiApIface.aidl b/wifi/aidl/android/hardware/wifi/IWifiApIface.aidl
new file mode 100644
index 0000000..71ea385
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiApIface.aidl
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiBand;
+
+/**
+ * Represents a network interface in AP mode.
+ *
+ * This can be obtained through |IWifiChip.getApIface|.
+ */
+@VintfStability
+interface IWifiApIface {
+    /**
+     * Get the name of this interface.
+     *
+     * @return Name of this interface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
+     */
+    String getName();
+
+    /**
+     * Get the names of the bridged AP instances.
+     *
+     * @return Vector containing the names of the bridged AP
+     *         instances. Note: Returns an empty vector for a non-bridged AP.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    String[] getBridgedInstances();
+
+    /**
+     * Gets the factory MAC address of the interface.
+     *
+     * @return Factory MAC address of the interface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    byte[6] getFactoryMacAddress();
+
+    /**
+     * Set country code for this iface.
+     *
+     * @param code 2 byte country code (as defined in ISO 3166) to set.
+     * @return status Status of the operation.
+     *         Possible status codes:
+     *         |WifiStatusCode.SUCCESS|,
+     *         |WifiStatusCode.FAILURE_UNKNOWN|,
+     *         |WifiStatusCode.FAILURE_IFACE_INVALID|
+     */
+    void setCountryCode(in byte[2] code);
+
+    /**
+     * Used to query the list of valid frequencies (depending on country code set)
+     * for the provided band.
+     *
+     * @param band Band for which the frequency list is being generated.
+     * @return Vector of valid frequencies for the provided band.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    int[] getValidFrequenciesForBand(in WifiBand band);
+
+    /**
+     * Reset all of the AP interfaces' MAC address to the factory MAC address.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void resetToFactoryMacAddress();
+
+    /**
+     * Changes the MAC address of the interface to the given MAC address.
+     *
+     * @param mac MAC address to change to.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void setMacAddress(in byte[6] mac);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiChip.aidl b/wifi/aidl/android/hardware/wifi/IWifiChip.aidl
new file mode 100644
index 0000000..fe9a6f3
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiChip.aidl
@@ -0,0 +1,1096 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.IWifiApIface;
+import android.hardware.wifi.IWifiChipEventCallback;
+import android.hardware.wifi.IWifiNanIface;
+import android.hardware.wifi.IWifiP2pIface;
+import android.hardware.wifi.IWifiRttController;
+import android.hardware.wifi.IWifiStaIface;
+import android.hardware.wifi.IfaceConcurrencyType;
+import android.hardware.wifi.IfaceType;
+import android.hardware.wifi.WifiBand;
+import android.hardware.wifi.WifiDebugHostWakeReasonStats;
+import android.hardware.wifi.WifiDebugRingBufferStatus;
+import android.hardware.wifi.WifiDebugRingBufferVerboseLevel;
+import android.hardware.wifi.WifiIfaceMode;
+import android.hardware.wifi.WifiRadioCombinationMatrix;
+import android.hardware.wifi.WifiUsableChannel;
+
+/**
+ * Interface that represents a chip that must be configured as a single unit.
+ */
+@VintfStability
+interface IWifiChip {
+    /**
+     * Capabilities exposed by this chip.
+     */
+    @VintfStability
+    @Backing(type="int")
+    enum ChipCapabilityMask {
+        /**
+         * Memory dump of Firmware.
+         */
+        DEBUG_MEMORY_FIRMWARE_DUMP = 1 << 0,
+        /**
+         * Memory dump of Driver.
+         */
+        DEBUG_MEMORY_DRIVER_DUMP = 1 << 1,
+        /**
+         * Connectivity events reported via debug ring buffer.
+         */
+        DEBUG_RING_BUFFER_CONNECT_EVENT = 1 << 2,
+        /**
+         * Power events reported via debug ring buffer.
+         */
+        DEBUG_RING_BUFFER_POWER_EVENT = 1 << 3,
+        /**
+         * Wakelock events reported via debug ring buffer.
+         */
+        DEBUG_RING_BUFFER_WAKELOCK_EVENT = 1 << 4,
+        /**
+         * Vendor data reported via debug ring buffer.
+         * This mostly contains firmware event logs.
+         */
+        DEBUG_RING_BUFFER_VENDOR_DATA = 1 << 5,
+        /**
+         * Host wake reasons stats collection.
+         */
+        DEBUG_HOST_WAKE_REASON_STATS = 1 << 6,
+        /**
+         * Error alerts.
+         */
+        DEBUG_ERROR_ALERTS = 1 << 7,
+        /**
+         * Set/Reset Tx Power limits.
+         */
+        SET_TX_POWER_LIMIT = 1 << 8,
+        /**
+         * Device to Device RTT.
+         */
+        D2D_RTT = 1 << 9,
+        /**
+         * Device to AP RTT.
+         */
+        D2AP_RTT = 1 << 10,
+        /**
+         * Set/Reset Tx Power limits.
+         */
+        USE_BODY_HEAD_SAR = 1 << 11,
+        /**
+         * Set Latency Mode.
+         */
+        SET_LATENCY_MODE = 1 << 12,
+        /**
+         * Support P2P MAC randomization.
+         */
+        P2P_RAND_MAC = 1 << 13,
+        /**
+         * Chip can operate in the 60GHz band (WiGig chip).
+         */
+        WIGIG = 1 << 14,
+    }
+
+    /**
+     * Set of interface concurrency types, along with the maximum number of interfaces that can have
+     * one of the specified concurrency types for a given ChipConcurrencyCombination. See
+     * ChipConcurrencyCombination below for examples.
+     */
+    @VintfStability
+    parcelable ChipConcurrencyCombinationLimit {
+        IfaceConcurrencyType[] types;
+        int maxIfaces;
+    }
+
+    /**
+     * Set of interfaces that can operate concurrently when in a given mode. See
+     * ChipMode below.
+     *
+     * For example:
+     *   [{STA} <= 2]
+     *       At most two STA interfaces are supported
+     *       [], [STA], [STA+STA]
+     *
+     *   [{STA} <= 1, {NAN} <= 1, {AP_BRIDGED} <= 1]
+     *       Any combination of STA, NAN, AP_BRIDGED
+     *       [], [STA], [NAN], [AP_BRIDGED], [STA+NAN], [STA+AP_BRIDGED], [NAN+AP_BRIDGED],
+     *       [STA+NAN+AP_BRIDGED]
+     *
+     *   [{STA} <= 1, {NAN,P2P} <= 1]
+     *       Optionally a STA and either NAN or P2P
+     *       [], [STA], [STA+NAN], [STA+P2P], [NAN], [P2P]
+     *       Not included [NAN+P2P], [STA+NAN+P2P]
+     *
+     *   [{STA} <= 1, {STA,NAN} <= 1]
+     *       Optionally a STA and either a second STA or a NAN
+     *       [], [STA], [STA+NAN], [STA+STA], [NAN]
+     *       Not included [STA+STA+NAN]
+     */
+    @VintfStability
+    parcelable ChipConcurrencyCombination {
+        ChipConcurrencyCombinationLimit[] limits;
+    }
+
+    /**
+     * Information about the version of the driver and firmware running this chip.
+     *
+     * The information in these ASCII strings are vendor specific and does not
+     * need to follow any particular format. It may be dumped as part of the bug
+     * report.
+     */
+    @VintfStability
+    parcelable ChipDebugInfo {
+        String driverDescription;
+        String firmwareDescription;
+    }
+
+    /**
+     * Set of interface types, along with the maximum number of interfaces that can have
+     * one of the specified types for a given ChipIfaceCombination. See
+     * ChipIfaceCombination for examples.
+     */
+    @VintfStability
+    parcelable ChipIfaceCombinationLimit {
+        IfaceType[] types;
+        int maxIfaces;
+    }
+
+    /**
+     * Set of interfaces that can operate concurrently when in a given mode. See
+     * ChipMode below.
+     *
+     * For example:
+     *   [{STA} <= 2]
+     *       At most two STA interfaces are supported
+     *       [], [STA], [STA+STA]
+     *
+     *   [{STA} <= 1, {NAN} <= 1, {AP} <= 1]
+     *       Any combination of STA, NAN, AP
+     *       [], [STA], [NAN], [AP], [STA+NAN], [STA+AP], [NAN+AP], [STA+NAN+AP]
+     *
+     *   [{STA} <= 1, {NAN,P2P} <= 1]
+     *       Optionally a STA and either NAN or P2P
+     *       [], [STA], [STA+NAN], [STA+P2P], [NAN], [P2P]
+     *       Not included [NAN+P2P], [STA+NAN+P2P]
+     *
+     *   [{STA} <= 1, {STA,NAN} <= 1]
+     *       Optionally a STA and either a second STA or a NAN
+     *       [], [STA], [STA+NAN], [STA+STA], [NAN]
+     *       Not included [STA+STA+NAN]
+     */
+    @VintfStability
+    parcelable ChipIfaceCombination {
+        ChipIfaceCombinationLimit[] limits;
+    }
+
+    /**
+     * A mode that the chip can be put in. A mode defines a set of constraints on
+     * the interfaces that can exist while in that mode. Modes define a unit of
+     * configuration where all interfaces must be torn down to switch to a
+     * different mode. Some HALs may only have a single mode, but an example where
+     * multiple modes would be required is if a chip has different firmwares with
+     * different capabilities.
+     *
+     * When in a mode, it must be possible to perform any combination of creating
+     * and removing interfaces as long as at least one of the
+     * ChipConcurrencyCombinations is satisfied. This means that if a chip has two
+     * available combinations, [{STA} <= 1] and [{AP_BRIDGED} <= 1] then it is expected
+     * that exactly one STA type or one AP_BRIDGED type can be created, but it
+     * is not expected that both a STA and AP_BRIDGED type  could be created. If it
+     * was then there would be a single available combination
+     * [{STA} <=1, {AP_BRIDGED} <= 1].
+     *
+     * When switching between two available combinations it is expected that
+     * interfaces only supported by the initial combination must be removed until
+     * the target combination is also satisfied. At that point new interfaces
+     * satisfying only the target combination can be added (meaning the initial
+     * combination limits will no longer satisfied). The addition of these new
+     * interfaces must not impact the existence of interfaces that satisfy both
+     * combinations.
+     *
+     * For example, a chip with available combinations:
+     *     [{STA} <= 2, {NAN} <=1] and [{STA} <=1, {NAN} <= 1, {AP_BRIDGED} <= 1}]
+     * If the chip currently has 3 interfaces STA, STA and NAN and wants to add an
+     * AP_BRIDGED interface in place of one of the STAs, then one of the STA interfaces
+     * must be removed first, and then the AP interface can be created after
+     * the STA has been torn down. During this process the remaining STA and NAN
+     * interfaces must not be removed/recreated.
+     *
+     * If a chip does not support this kind of reconfiguration in this mode then
+     * the combinations must be separated into two separate modes. Before
+     * switching modes, all interfaces must be torn down, the mode switch must be
+     * enacted, and when it completes the new interfaces must be brought up.
+     */
+    @VintfStability
+    parcelable ChipMode {
+        /**
+         * Id that can be used to put the chip in this mode.
+         */
+        int id;
+        /**
+         * A list of the possible interface concurrency type combinations that the
+         * chip can have while in this mode.
+         */
+        ChipConcurrencyCombination[] availableCombinations;
+    }
+
+    /**
+     * Wi-Fi coex channel avoidance support.
+     */
+    const int NO_POWER_CAP_CONSTANT = 0x7FFFFFFF;
+
+    @VintfStability
+    @Backing(type="int")
+    enum CoexRestriction {
+        WIFI_DIRECT = 1 << 0,
+        SOFTAP = 1 << 1,
+        WIFI_AWARE = 1 << 2,
+    }
+
+    /**
+     * Representation of a Wi-Fi channel for Wi-Fi coex channel avoidance.
+     */
+    @VintfStability
+    parcelable CoexUnsafeChannel {
+        /*
+         * Band of the channel.
+         */
+        WifiBand band;
+        /*
+         * Channel number.
+         */
+        int channel;
+        /**
+         * The power cap will be a maximum power value in dbm that is allowed to be transmitted by
+         * the chip on this channel. A value of PowerCapConstant.NO_POWER_CAP means no limitation
+         * on transmitted power is needed by the chip for this channel.
+         */
+        int powerCapDbm;
+    }
+
+    /**
+     * This enum represents the different latency modes that can be set through |setLatencyMode|.
+     */
+    @VintfStability
+    @Backing(type="int")
+    enum LatencyMode {
+        NORMAL = 0,
+        LOW = 1,
+    }
+
+    /**
+     * When there are 2 or more simultaneous STA connections, this use case hint indicates what
+     * use-case is being enabled by the framework. This use case hint can be used by the firmware
+     * to modify various firmware configurations like:
+     *   - Allowed BSSIDs the firmware can choose for the initial connection/roaming attempts.
+     *   - Duty cycle to choose for the 2 STA connections if the radio is in MCC mode.
+     *   - Whether roaming, APF and other offloads need to be enabled or not.
+     * Note:
+     *   - This will be invoked before an active wifi connection is established on the second
+     *     interface.
+     *   - This use-case hint is implicitly void when the second STA interface is brought down.
+     *   - When there is only 1 STA interface, we should still retain the last use case
+     *     set, which must become active the next time multi STA is enabled.
+     *     1. Initialize with single STA.
+     *     2. Framework creates second STA.
+     *     3. Framework sets use case to DUAL_STA_NON_TRANSIENT_UNBIASED.
+     *     4. Framework destroys second STA. Only 1 STA remains.
+     *     5. Framework recreates second STA.
+     *     6. The active use case remains DUAL_STA_NON_TRANSIENT_UNBIASED (i.e. firmware should not
+     *        automatically change it during period of single STA unless requested by framework).
+     */
+    @VintfStability
+    @Backing(type="byte")
+    enum MultiStaUseCase {
+        /**
+         * Usage:
+         * - This will be sent down for make before break use-case.
+         * - Platform is trying to speculatively connect to a second network and evaluate it without
+         *  disrupting the primary connection.
+         * Requirements for Firmware:
+         * - Do not reduce the number of tx/rx chains of primary connection.
+         * - If using MCC, should set the MCC duty cycle of the primary connection to be higher than
+         *  the secondary connection (maybe 70/30 split).
+         * - Should pick the best BSSID for the secondary STA (disregard the chip mode) independent
+         *   of the primary STA:
+         *    - Don’t optimize for DBS vs MCC/SCC
+         * - Should not impact the primary connection’s bssid selection:
+         *    - Don’t downgrade chains of the existing primary connection.
+         *    - Don’t optimize for DBS vs MCC/SCC.
+         */
+        DUAL_STA_TRANSIENT_PREFER_PRIMARY = 0,
+        /**
+         * Usage:
+         * - This will be sent down for any app requested peer to peer connections.
+         * - In this case, both the connections need to be allocated equal resources.
+         * - For the peer to peer use case, BSSID for the secondary connection will be chosen by the
+         *   framework.
+         *
+         * Requirements for Firmware:
+         * - Can choose MCC or DBS mode depending on the MCC efficiency and HW capability.
+         * - If using MCC, set the MCC duty cycle of the primary connection to be equal to the
+         *   secondary connection.
+         * - Prefer BSSID candidates which will help provide the best "overall" performance for both
+         *   the connections.
+         */
+        DUAL_STA_NON_TRANSIENT_UNBIASED = 1,
+    }
+
+    /**
+     * List of preset wifi radio TX power levels for different scenarios.
+     * The actual power values (typically varies based on the channel,
+     * 802.11 connection type, number of MIMO streams, etc) for each scenario
+     * is defined by the OEM as a BDF file since it varies for each wifi chip
+     * vendor and device.
+     */
+    @VintfStability
+    @Backing(type="int")
+    enum TxPowerScenario {
+        VOICE_CALL = 0,
+        ON_HEAD_CELL_OFF = 1,
+        ON_HEAD_CELL_ON = 2,
+        ON_BODY_CELL_OFF = 3,
+        ON_BODY_CELL_ON = 4,
+    }
+
+    /**
+     * Usable Wifi channels filter masks.
+     */
+    @VintfStability
+    @Backing(type="int")
+    enum UsableChannelFilter {
+        /**
+         * Filter Wifi channels that should be avoided due to extreme
+         * cellular coexistence restrictions. Some Wifi channels can have
+         * extreme interference from/to cellular due to short frequency
+         * seperation with neighboring cellular channels, or when there
+         * is harmonic and intermodulation interference. Channels which
+         * only have some performance degradation (e.g. power back off is
+         * sufficient to deal with coexistence issue) can be included and
+         * should not be filtered out.
+         */
+        CELLULAR_COEXISTENCE = 1 << 0,
+        /**
+         * Filter based on concurrency state.
+         * Examples:
+         * - 5GHz SAP operation may be supported in standalone mode, but if
+         *  there is a STA connection on a 5GHz DFS channel, none of the 5GHz
+         *  channels are usable for SAP if device does not support DFS SAP mode.
+         * - P2P GO may not be supported on indoor channels in the EU during
+         *  standalone mode but if there is a STA connection on indoor channel.
+         *  P2P GO may be supported by some vendors on the same STA channel.
+         */
+        CONCURRENCY = 1 << 1,
+        /**
+         * Filter Wifi channels that are supported for NAN 3.1 Instant communication mode.
+         * This filter should only be applied to a NAN interface.
+         * - If 5G is supported, then default discovery channel 149/44 is considered.
+         * - If 5G is not supported, then channel 6 has to be considered.
+         */
+        NAN_INSTANT_MODE = 1 << 2,
+    }
+
+    /**
+     * Configure the Chip.
+     * This may NOT be called to reconfigure a chip due to an internal
+     * limitation. Calling this when chip is already configured in a different
+     * mode must trigger an ERROR_NOT_SUPPORTED failure.
+     * If you want to do reconfiguration, please call |IWifi.stop| and |IWifi.start|
+     * to restart Wifi HAL before calling this.
+     * Any existing |IWifiIface| objects must be marked invalid after this call.
+     * If this fails then the chip is now in an undefined state and
+     * configureChip must be called again.
+     * Must trigger |IWifiChipEventCallback.onChipReconfigured| on success.
+     * Must trigger |IWifiEventCallback.onFailure| on failure.
+     *
+     * @param modeId Mode that the chip must switch to, corresponding to the
+     *        id property of the target ChipMode.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void configureChip(in int modeId);
+
+    /**
+     * Create an AP iface on the chip.
+     *
+     * Depending on the mode the chip is configured in, the interface creation
+     * may fail (code: |WifiStatusCode.ERROR_NOT_AVAILABLE|) if we've already
+     * reached the maximum allowed (specified in |ChipIfaceCombination|) number
+     * of ifaces of the AP type.
+     *
+     * @return AIDL interface object representing the iface if
+     *         successful, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|
+     */
+    @PropagateAllowBlocking IWifiApIface createApIface();
+
+    /**
+     * Create a bridged AP iface on the chip.
+     *
+     * Depending on the mode the chip is configured in, the interface creation
+     * may fail (code: |WifiStatusCode.ERROR_NOT_AVAILABLE|) if we've already
+     * reached the maximum allowed (specified in |ChipIfaceCombination|) number
+     * of ifaces of the AP type.
+     *
+     * @return AIDL interface object representing the iface if
+     *         successful, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|
+     */
+    @PropagateAllowBlocking IWifiApIface createBridgedApIface();
+
+    /**
+     * Create a NAN iface on the chip.
+     *
+     * Depending on the mode the chip is configured in, the interface creation
+     * may fail (code: |WifiStatusCode.ERROR_NOT_AVAILABLE|) if we've already
+     * reached the maximum allowed (specified in |ChipIfaceCombination|) number
+     * of ifaces of the NAN type.
+     *
+     * @return AIDL interface object representing the iface if
+     *         successful, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|
+     */
+    @PropagateAllowBlocking IWifiNanIface createNanIface();
+
+    /**
+     * Create a P2P iface on the chip.
+     *
+     * Depending on the mode the chip is configured in, the interface creation
+     * may fail (code: |WifiStatusCode.ERROR_NOT_AVAILABLE|) if we've already
+     * reached the maximum allowed (specified in |ChipIfaceCombination|) number
+     * of ifaces of the P2P type.
+     *
+     * @return AIDL interface object representing the iface if
+     *         successful, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|
+     */
+    @PropagateAllowBlocking IWifiP2pIface createP2pIface();
+
+    /**
+     * Create an RTTController instance.
+     *
+     * RTT controller can be either:
+     * a) Bound to a specific STA iface by passing in the corresponding
+     * |IWifiStaIface| object in the |boundIface| param, OR
+     * b) Let the implementation decide the iface to use for RTT operations
+     * by passing null in the |boundIface| param.
+     *
+     * @param boundIface AIDL interface object representing the STA iface if
+     *        the responder must be bound to a specific iface, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    @PropagateAllowBlocking IWifiRttController createRttController(in IWifiStaIface boundIface);
+
+    /**
+     * Create a STA iface on the chip.
+     *
+     * Depending on the mode the chip is configured in, the interface creation
+     * may fail (code: |WifiStatusCode.ERROR_NOT_AVAILABLE|) if we've already
+     * reached the maximum allowed (specified in |ChipIfaceCombination|) number
+     * of ifaces of the STA type.
+     *
+     * @return AIDL interface object representing the iface if
+     *         successful, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|
+     */
+    @PropagateAllowBlocking IWifiStaIface createStaIface();
+
+    /**
+     * API to enable/disable alert notifications from the chip.
+     * These alerts must be used to notify the framework of any fatal error events
+     * that the chip encounters via |IWifiChipEventCallback.onDebugErrorAlert| method.
+     * Must fail if |ChipCapabilityMask.DEBUG_ERROR_ALERTS| is not set.
+     *
+     * @param enable true to enable, false to disable.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void enableDebugErrorAlerts(in boolean enable);
+
+    /**
+     * API to flush debug ring buffer data to files.
+     *
+     * Force flush debug ring buffer using IBase::debug.
+     * This API helps to collect firmware/driver/pkt logs.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void flushRingBufferToFile();
+
+    /**
+     * API to force dump data into the corresponding ring buffer.
+     * This is to be invoked during bugreport collection.
+     *
+     * @param ringName Name of the ring for which data collection should
+     *        be forced. This can be retrieved via the corresponding
+     *        |WifiDebugRingBufferStatus|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_STARTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void forceDumpToDebugRingBuffer(in String ringName);
+
+    /**
+     * Gets an AIDL interface object for the AP Iface corresponding
+     * to the provided ifname.
+     *
+     * @param ifname Name of the iface.
+     * @return AIDL interface object representing the iface if
+     *         it exists, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    @PropagateAllowBlocking IWifiApIface getApIface(in String ifname);
+
+    /**
+     * List all the AP iface names configured on the chip.
+     * The corresponding |IWifiApIface| object for any iface
+     * can be retrieved using the |getApIface| method.
+     *
+     * @return List of all AP iface names on the chip.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    String[] getApIfaceNames();
+
+    /**
+     * Get the set of operation modes that the chip supports.
+     *
+     * @return List of modes supported by the device.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    ChipMode[] getAvailableModes();
+
+    /**
+     * Get the capabilities supported by this chip.
+     *
+     * @return Bitset of |ChipCapabilityMask| values.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    ChipCapabilityMask getCapabilities();
+
+    /**
+     * API to retrieve the wifi wake up reason stats for debugging.
+     * The driver is expected to start maintaining these stats once the chip
+     * is configured using |configureChip|. These stats must be reset whenever
+     * the chip is reconfigured or the HAL is stopped.
+     *
+     * @return Instance of |WifiDebugHostWakeReasonStats|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    WifiDebugHostWakeReasonStats getDebugHostWakeReasonStats();
+
+    /**
+     * The WiFi debug ring buffer life cycle is as follows:
+     * - At initialization, the framework must call |getDebugRingBuffersStatus|.
+     *   to obtain the names and list of supported ring buffers.
+     *   The driver may expose several different rings, each holding a different
+     *   type of data (connection events, power events, etc).
+     * - When WiFi operations start, the framework must call
+     *   |startLoggingToDebugRingBuffer| to trigger log collection for a specific
+     *   ring. The vebose level for each ring buffer can be specified in this API.
+     * - During wifi operations, the driver must periodically report per ring data
+     *   to framework by invoking the
+     *   |IWifiChipEventCallback.onDebugRingBufferDataAvailable| callback.
+     * - When capturing a bug report, the framework must indicate to driver that
+     *   all the data has to be uploaded urgently by calling |forceDumpToDebugRingBuffer|.
+     *
+     * The data uploaded by driver must be stored by the framework in separate files,
+     * with one stream of file per ring. The framework must store the files in pcapng
+     * format, allowing for easy merging and parsing with network analyzer tools.
+     * TODO: Since we're no longer dumping the raw data, storing in separate
+     * pcapng files for parsing later must not work anymore.
+     */
+
+    /*
+     * API to get the status of all ring buffers supported by driver.
+     *
+     * @return Vector of |WifiDebugRingBufferStatus| corresponding to the
+     *         status of each ring buffer on the device.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    WifiDebugRingBufferStatus[] getDebugRingBuffersStatus();
+
+    /**
+     * Get the Id assigned to this chip.
+     *
+     * @return Assigned chip Id.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    int getId();
+
+    /**
+     * Get the current mode that the chip is in.
+     *
+     * @return Mode that the chip is currently configured to,
+     *         corresponding to the Id property of the target ChipMode.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    int getMode();
+
+    /**
+     * Gets an AIDL interface object for the NAN Iface corresponding
+     * to the provided ifname.
+     *
+     * @param ifname Name of the iface.
+     * @return AIDL interface object representing the iface if
+     *         it exists, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    @PropagateAllowBlocking IWifiNanIface getNanIface(in String ifname);
+
+    /**
+     * List all the NAN iface names configured on the chip.
+     * The corresponding |IWifiNanIface| object for any iface can
+     * be retrieved using the |getNanIface| method.
+     *
+     * @return List of all NAN iface names on the chip.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    String[] getNanIfaceNames();
+
+    /**
+     * Gets an AIDL interface object for the P2P Iface corresponding
+     * to the provided ifname.
+     *
+     * @param ifname Name of the iface.
+     * @return AIDL interface object representing the iface if
+     *         it exists, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    @PropagateAllowBlocking IWifiP2pIface getP2pIface(in String ifname);
+
+    /**
+     * List all the P2P iface names configured on the chip.
+     * The corresponding |IWifiP2pIface| object for any iface can
+     * be retrieved using the |getP2pIface| method.
+     *
+     * @return List of all P2P iface names on the chip.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    String[] getP2pIfaceNames();
+
+    /**
+     * Gets an AIDL interface object for the STA Iface corresponding
+     * to the provided ifname.
+     *
+     * @param ifname Name of the iface.
+     * @return AIDL interface object representing the iface if
+     *         it exists, null otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    @PropagateAllowBlocking IWifiStaIface getStaIface(in String ifname);
+
+    /**
+     * List all the STA iface names configured on the chip.
+     * The corresponding |IWifiStaIface| object for any iface can
+     * be retrieved using the |getStaIface| method.
+     *
+     * @param List of all STA iface names on the chip.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    String[] getStaIfaceNames();
+
+    /**
+     * Retrieve the list of all the possible radio combinations supported by this
+     * chip.
+     *
+     * @return A list of all the possible radio combinations represented by
+     *         |WifiRadioCombinationMatrix|.
+     *         For example, in case of a chip which has two radios, where one radio is
+     *         capable of 2.4GHz 2X2 only and another radio which is capable of either
+     *         5GHz or 6GHz 2X2, the number of possible radio combinations in this case
+     *         is 5 and the possible combinations are:
+     *         {{{2G 2X2}}, //Standalone 2G
+     *         {{5G 2X2}}, //Standalone 5G
+     *         {{6G 2X2}}, //Standalone 6G
+     *         {{2G 2X2}, {5G 2X2}}, //2G+5G DBS
+     *         {{2G 2X2}, {6G 2X2}}} //2G+6G DBS
+     *         Note: Since this chip doesn’t support 5G+6G simultaneous operation,
+     *         as there is only one radio which can support both bands, it can only
+     *         do MCC 5G+6G. This table should not get populated with possible MCC
+     *         configurations. This is only for simultaneous radio configurations
+     *         (such as standalone, multi band simultaneous or single band simultaneous).
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.FAILURE_UNKNOWN|
+     *
+     */
+    WifiRadioCombinationMatrix getSupportedRadioCombinationsMatrix();
+
+    /**
+     * Retrieve a list of usable Wifi channels for the specified band &
+     * operational modes.
+     *
+     * The list of usable Wifi channels in a given band depends on factors
+     * like current country code, operational mode (e.g. STA, SAP, WFD-CLI,
+     * WFD-GO, TDLS, NAN) and other restrictons due to DFS, cellular coexistence
+     * and concurrency state of the device.
+     *
+     * @param band |WifiBand| for which list of usable channels is requested.
+     * @param ifaceModeMask Bitmask of the modes represented by |WifiIfaceMode|.
+     *        Bitmask respresents all the modes that the caller is interested
+     *        in (e.g. STA, SAP, CLI, GO, TDLS, NAN). E.g. If the caller is
+     *        interested in knowing usable channels for P2P CLI, P2P GO & NAN,
+     *        ifaceModeMask would be set to
+     *        IFACE_MODE_P2P_CLIENT|IFACE_MODE_P2P_GO|IFACE_MODE_NAN.
+     * @param filterMask Bitmask of filters represented by
+     *        |UsableChannelFilter|. Specifies whether driver should filter
+     *        channels based on additional criteria. If no filter is specified,
+     *        then the driver should return usable channels purely based on
+     *        regulatory constraints.
+     * @return List of channels represented by |WifiUsableChannel|.
+     *         Each entry represents a channel frequency, bandwidth and
+     *         bitmask of modes (e.g. STA, SAP, CLI, GO, TDLS, NAN) that are
+     *         allowed on that channel. E.g. If only STA mode can be supported
+     *         on an indoor channel, only the IFACE_MODE_STA bit would be set
+     *         for that channel. If 5GHz SAP cannot be supported, then none of
+     *         the 5GHz channels will have IFACE_MODE_SOFTAP bit set.
+     *         Note: Bits do not represent concurrency state. Each bit only
+     *         represents whether a particular mode is allowed on that channel.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.FAILURE_UNKNOWN|
+     */
+    WifiUsableChannel[] getUsableChannels(
+            in WifiBand band, in WifiIfaceMode ifaceModeMask, in UsableChannelFilter filterMask);
+
+    /**
+     * Requests notifications of significant events on this chip. Multiple calls
+     * to this must register multiple callbacks, each of which must receive all
+     * events.
+     *
+     * @param callback An instance of the |IWifiChipEventCallback| AIDL interface
+     *        object.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+     */
+    void registerEventCallback(in IWifiChipEventCallback callback);
+
+    /**
+     * Removes the AP Iface with the provided ifname.
+     * Any further calls on the corresponding |IWifiApIface| AIDL interface
+     * object must fail.
+     *
+     * @param ifname Name of the iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    void removeApIface(in String ifname);
+
+    /**
+     * Removes an instance of AP iface with name |ifaceInstanceName| from the
+     * bridge AP with name |brIfaceName|.
+     *
+     * Use the API |removeApIface| with the brIfaceName to remove the bridge iface.
+     *
+     * @param brIfaceName Name of the bridged AP iface.
+     * @param ifaceInstanceName Name of the AP instance. The empty instance is
+     *        invalid.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|
+     */
+    void removeIfaceInstanceFromBridgedApIface(in String brIfaceName, in String ifaceInstanceName);
+
+    /**
+     * Removes the NAN Iface with the provided ifname.
+     * Any further calls on the corresponding |IWifiNanIface| AIDL interface
+     * object must fail.
+     *
+     * @param ifname Name of the iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    void removeNanIface(in String ifname);
+
+    /**
+     * Removes the P2P Iface with the provided ifname.
+     * Any further calls on the corresponding |IWifiP2pIface| AIDL interface
+     * object must fail.
+     *
+     * @param ifname Name of the iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    void removeP2pIface(in String ifname);
+
+    /**
+     * Removes the STA Iface with the provided ifname.
+     * Any further calls on the corresponding |IWifiStaIface| AIDL interface
+     * object must fail.
+     *
+     * @param ifname Name of the iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    void removeStaIface(in String ifname);
+
+    /**
+     * Request information about the chip.
+     *
+     * @return Instance of |ChipDebugInfo|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    ChipDebugInfo requestChipDebugInfo();
+
+    /**
+     * Request vendor debug info from the driver.
+     *
+     * @return Vector of bytes retrieved from the driver.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    byte[] requestDriverDebugDump();
+
+    /**
+     * Request vendor debug info from the firmware.
+     *
+     * @return Vector of bytes retrieved from the firmware.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    byte[] requestFirmwareDebugDump();
+
+    /**
+     * API to reset TX power levels.
+     * This is used to indicate the end of the previously selected TX power
+     * scenario and let the wifi chip fall back to the default power values.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void resetTxPowerScenario();
+
+    /**
+     * API to select one of the preset TX power scenarios.
+     *
+     * The framework must invoke this method with the appropriate scenario to let
+     * the wifi chip change its transmitting power levels.
+     * OEM's should define various power profiles for each of the scenarios
+     * above (defined in |TxPowerScenario|) in a vendor extension.
+     *
+     * @param scenario One of the preselected scenarios defined in
+     *        |TxPowerScenario|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void selectTxPowerScenario(in TxPowerScenario scenario);
+
+    /**
+     * Invoked to indicate that the provided |CoexUnsafeChannels| should be avoided with the
+     * specified restrictions.
+     *
+     * Channel avoidance is a suggestion and should be done on a best-effort approach. If a provided
+     * channel is used, then the specified power cap should be applied.
+     *
+     * In addition, hard restrictions on the Wifi modes may be indicated by |CoexRestriction| bits
+     * (WIFI_DIRECT, SOFTAP, WIFI_AWARE) in the |restrictions| bitfield. If a hard restriction is
+     * provided, then the channels should be completely avoided for the provided Wifi modes instead
+     * of by best-effort.
+     *
+     * @param unsafeChannels List of |CoexUnsafeChannels| to avoid.
+     * @param restrictions Bitset of |CoexRestriction| values indicating Wifi interfaces to
+     *         completely avoid.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     */
+    void setCoexUnsafeChannels(
+            in CoexUnsafeChannel[] unsafeChannels, in CoexRestriction restrictions);
+
+    /**
+     * Set country code for this Wifi chip.
+     *
+     * Country code is global setting across the Wifi chip and not Wifi
+     * interface (STA or AP) specific.
+     *
+     * @param code 2 byte country code (as defined in ISO 3166) to set.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.FAILURE_UNKNOWN|,
+     *         |WifiStatusCode.FAILURE_IFACE_INVALID|
+     */
+    void setCountryCode(in byte[2] code);
+
+    /**
+     * API to set the wifi latency mode
+     *
+     * The latency mode is a hint to the HAL to enable or disable Wi-Fi latency
+     * optimization. The optimization should be enabled if the mode is set to |LOW|
+     * and should be disabled if the mode is set to |NORMAL|.
+     * Wi-Fi latency optimization may trade-off latency against other Wi-Fi
+     * functionality such as scanning, roaming, etc. but it should not result in
+     * completely halting this functionality.
+     *
+     * The low latency mode targets applications such as gaming and virtual reality.
+     */
+    void setLatencyMode(in LatencyMode mode);
+
+    /**
+     * Invoked to indicate that the provided iface is the primary STA iface when more
+     * than 1 STA ifaces are concurrently active.
+     * Notes:
+     * - If the wifi firmware/chip cannot support multiple instances of any offload
+     *   (like roaming, APF, rssi threshold, etc), the firmware should ensure that these
+     *   offloads are at least enabled for the primary interface. If the new primary interface is
+     *   already connected to a network, the firmware must switch all the offloads on
+     *   this new interface without disconnecting.
+     * - When there is only 1 STA interface, the firmware must still retain the last primary
+     *   connection, which must become active the next time multi STA is enabled.
+     *
+     * @param ifname Name of the STA iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    void setMultiStaPrimaryConnection(in String ifName);
+
+    /**
+     * Invoked to indicate the STA + STA use-case that is active.
+     *
+     * Refer to documentation of |MultiStaUseCase| for details.
+     *
+     * @param useCase Use case that is active.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|
+     */
+    void setMultiStaUseCase(in MultiStaUseCase useCase);
+
+    /**
+     * API to trigger the debug data collection.
+     *
+     * @param ringName Name of the ring for which data collection
+     *        shall start. This can be retrieved via the corresponding
+     *        |WifiDebugRingBufferStatus|.
+     * @param verboseLevel Verbose level for logging.
+     * @parm maxIntervalInSec Maximum interval in seconds for driver to invoke
+     *       |onDebugRingBufferData|, ignore if zero.
+     * @parm minDataSizeInBytes: Minimum data size in buffer for driver to invoke
+     *       |onDebugRingBufferData|, ignore if zero.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void startLoggingToDebugRingBuffer(in String ringName,
+            in WifiDebugRingBufferVerboseLevel verboseLevel, in int maxIntervalInSec,
+            in int minDataSizeInBytes);
+
+    /**
+     * API to stop the debug data collection for all ring buffers.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.NOT_AVAILABLE|,
+     *         |WifiStatusCode.UNKNOWN|
+     */
+    void stopLoggingToDebugRingBuffer();
+
+    /**
+     * Trigger subsystem restart.
+     *
+     * If the framework detects a problem (e.g. connection failure),
+     * it must call this function to attempt recovery.
+     *
+     * When the wifi HAL receives |triggerSubsystemRestart|, it must restart
+     * the wlan subsystem, especially the wlan firmware.
+     *
+     * Regarding the callback function for subsystem restart, refer to documentation of
+     * |IWifiEventCallback.onSubsystemRestart| for details.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void triggerSubsystemRestart();
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiChipEventCallback.aidl b/wifi/aidl/android/hardware/wifi/IWifiChipEventCallback.aidl
new file mode 100644
index 0000000..2bc4c0e
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiChipEventCallback.aidl
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.IfaceType;
+import android.hardware.wifi.WifiBand;
+import android.hardware.wifi.WifiDebugRingBufferStatus;
+import android.hardware.wifi.WifiStatusCode;
+
+/**
+ * Wifi chip event callbacks.
+ */
+@VintfStability
+oneway interface IWifiChipEventCallback {
+    /**
+     * Struct describing the state of each iface operating on the radio chain
+     * (hardware MAC) on the device.
+     */
+    @VintfStability
+    parcelable IfaceInfo {
+        /**
+         * Name of the interface (ex. wlan0).
+         */
+        String name;
+        /**
+         * Wifi channel on which this interface is operating.
+         */
+        int channel;
+    }
+
+    /**
+     * Struct describing the state of each hardware radio chain (hardware MAC)
+     * on the device.
+     */
+    @VintfStability
+    parcelable RadioModeInfo {
+        /**
+         * Identifier for this radio chain. This is vendor dependent and used
+         * only for debugging purposes.
+         */
+        int radioId;
+        /**
+         * List of bands on which this radio chain is operating.
+         * Can be one of:
+         * a) |WifiBand.BAND_24GHZ| => 2.4Ghz.
+         * b) |WifiBand.BAND_5GHZ| => 5Ghz.
+         * c) |WifiBand.BAND_24GHZ_5GHZ| => 2.4Ghz + 5Ghz (Radio is time sharing
+         * across the 2 bands).
+         * d) |WifiBand.BAND_6GHZ| => 6Ghz.
+         * e) |WifiBand.BAND_5GHZ_6GHZ| => 5Ghz + 6Ghz (Radio is time sharing
+         * across the 2 bands).
+         * f) |WifiBand.BAND_24GHZ_5GHZ_6GHZ| => 2.4Ghz + 5Ghz + 6Ghz (Radio is
+         * time sharing across the 3 bands).
+         */
+        WifiBand bandInfo;
+        /**
+         * List of interfaces on this radio chain (hardware MAC).
+         */
+        IfaceInfo[] ifaceInfos;
+    }
+
+    /**
+     * Callback indicating that a chip reconfiguration failed. This is a fatal
+     * error and any iface objects available previously must be considered
+     * invalid. The client can attempt to recover by trying to reconfigure the
+     * chip again using |IWifiChip.configureChip|.
+     *
+     * @param status Failure reason code.
+     */
+    void onChipReconfigureFailure(in WifiStatusCode status);
+
+    /**
+     * Callback indicating that the chip has been reconfigured successfully. At
+     * this point the interfaces available in the mode must be able to be
+     * configured. When this is called, any previous iface objects must be
+     * considered invalid.
+     *
+     * @param modeId The mode that the chip switched to, corresponding to the id
+     *        property of the target ChipMode.
+     */
+    void onChipReconfigured(in int modeId);
+
+    /**
+     * Callback indicating that the chip has encountered a fatal error.
+     * Client must not attempt to parse either the errorCode or debugData.
+     * Must only be captured in a bugreport.
+     *
+     * @param errorCode Vendor defined error code.
+     * @param debugData Vendor defined data used for debugging.
+     */
+    void onDebugErrorAlert(in int errorCode, in byte[] debugData);
+
+    /**
+     * Callbacks for reporting debug ring buffer data.
+     *
+     * The ring buffer data collection is event based:
+     * - Driver calls this callback when new records are available, the
+     *   |WifiDebugRingBufferStatus| passed up to framework in the callback
+     *   indicates to framework if more data is available in the ring buffer.
+     *   It is not expected that driver will necessarily always empty the ring
+     *   immediately as data is available. Instead the driver will report data
+     *   every X seconds, or if N bytes are available, based on the parameters
+     *   set via |startLoggingToDebugRingBuffer|.
+     * - In the case where a bug report has to be captured, the framework will
+     *   require driver to upload all data immediately. This is indicated to
+     *   driver when framework calls |forceDumpToDebugRingBuffer|. The driver
+     *   will start sending all available data in the indicated ring by repeatedly
+     *   invoking this callback.
+     *
+     * @param status Status of the corresponding ring buffer. This should
+     *         contain the name of the ring buffer on which the data is
+     *         available.
+     * @param data Raw bytes of data sent by the driver. Must be dumped
+     *         out to a bugreport and post processed.
+     */
+    void onDebugRingBufferDataAvailable(in WifiDebugRingBufferStatus status, in byte[] data);
+
+    /**
+     * Callback indicating that a new iface has been added to the chip.
+     *
+     * @param type Type of iface added.
+     * @param name Name of iface added.
+     */
+    void onIfaceAdded(in IfaceType type, in String name);
+
+    /**
+     * Callback indicating that an existing iface has been removed from the chip.
+     *
+     * @param type Type of iface removed.
+     * @param name Name of iface removed.
+     */
+    void onIfaceRemoved(in IfaceType type, in String name);
+
+    /**
+     * Indicates a radio mode change.
+     * Radio mode change could be a result of:
+     * a) Bringing up concurrent interfaces (ex. STA + AP).
+     * b) Change in operating band of one of the concurrent interfaces
+     * ( ex. STA connection moved from 2.4G to 5G)
+     *
+     * @param radioModeInfos List of RadioModeInfo structures for each
+     *        radio chain (hardware MAC) on the device.
+     */
+    void onRadioModeChange(in RadioModeInfo[] radioModeInfos);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiEventCallback.aidl b/wifi/aidl/android/hardware/wifi/IWifiEventCallback.aidl
new file mode 100644
index 0000000..761bbf5
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiEventCallback.aidl
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiStatusCode;
+
+@VintfStability
+oneway interface IWifiEventCallback {
+    /**
+     * Called when the Wi-Fi system failed in a way that caused it be disabled.
+     * Calling start again must restart Wi-Fi as if stop then start was called
+     * (full state reset). When this event is received all IWifiChip & IWifiIface
+     * objects retrieved after the last call to start will be considered invalid.
+     *
+     * @param status Failure reason code.
+     */
+    void onFailure(in WifiStatusCode status);
+
+    /**
+     * Called in response to a call to start indicating that the operation
+     * completed. After this callback the HAL must be fully operational.
+     */
+    void onStart();
+
+    /**
+     * Called in response to a call to stop indicating that the operation
+     * completed. When this event is received all IWifiChip objects retrieved
+     * after the last call to start will be considered invalid.
+     */
+    void onStop();
+
+    /**
+     * Must be called when the Wi-Fi subsystem restart completes.
+     * Once this event is received, framework must fully reset the Wi-Fi stack state.
+     *
+     * @param status Status code.
+     */
+    void onSubsystemRestart(in WifiStatusCode status);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiNanIface.aidl b/wifi/aidl/android/hardware/wifi/IWifiNanIface.aidl
new file mode 100644
index 0000000..45644b4
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiNanIface.aidl
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.IWifiNanIfaceEventCallback;
+import android.hardware.wifi.NanConfigRequest;
+import android.hardware.wifi.NanConfigRequestSupplemental;
+import android.hardware.wifi.NanEnableRequest;
+import android.hardware.wifi.NanInitiateDataPathRequest;
+import android.hardware.wifi.NanPublishRequest;
+import android.hardware.wifi.NanRespondToDataPathIndicationRequest;
+import android.hardware.wifi.NanSubscribeRequest;
+import android.hardware.wifi.NanTransmitFollowupRequest;
+
+/**
+ * Interface used to represent a single NAN (Neighbour Aware Network) iface.
+ *
+ * References to "NAN Spec" are to the Wi-Fi Alliance "Wi-Fi Neighbor Awareness
+ * Networking (NAN) Technical Specification".
+ */
+@VintfStability
+interface IWifiNanIface {
+    /**
+     * Minimum length of Passphrase argument for a data-path configuration.
+     */
+    const int MIN_DATA_PATH_CONFIG_PASSPHRASE_LENGTH = 8;
+
+    /**
+     * Maximum length of Passphrase argument for a data-path configuration.
+     */
+    const int MAX_DATA_PATH_CONFIG_PASSPHRASE_LENGTH = 63;
+
+    /**
+     * Get the name of this iface.
+     *
+     * @return Name of this iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
+     */
+    String getName();
+
+    /**
+     * Configures an existing NAN functionality (i.e. assumes
+     * |IWifiNanIface.enableRequest| already submitted and succeeded).
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyConfigResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param msg1 Instance of |NanConfigRequest|.
+     * @param msg2 Instance of |NanConfigRequestSupplemental|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void configRequest(
+            in char cmdId, in NanConfigRequest msg1, in NanConfigRequestSupplemental msg2);
+
+    /**
+     * Create a NAN Data Interface.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyCreateDataInterfaceResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void createDataInterfaceRequest(in char cmdId, in String ifaceName);
+
+    /**
+     * Delete a NAN Data Interface.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyDeleteDataInterfaceResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void deleteDataInterfaceRequest(in char cmdId, in String ifaceName);
+
+    /**
+     * Disable NAN functionality.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyDisableResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void disableRequest(in char cmdId);
+
+    /**
+     * Configures and activates NAN clustering (does not start
+     * a discovery session or set up data-interfaces or data-paths). Use the
+     * |IWifiNanIface.configureRequest| method to change the configuration of an already enabled
+     * NAN interface.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyEnableResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param msg1 Instance of |NanEnableRequest|.
+     * @param msg2 Instance of |NanConfigRequestSupplemental|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void enableRequest(
+            in char cmdId, in NanEnableRequest msg1, in NanConfigRequestSupplemental msg2);
+
+    /**
+     * Get NAN capabilities. Asynchronous response is with
+     * |IWifiNanIfaceEventCallback.notifyCapabilitiesResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void getCapabilitiesRequest(in char cmdId);
+
+    /**
+     * Initiate a data-path (NDP) setup operation: Initiator.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyInitiateDataPathResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param msg Instance of |NanInitiateDataPathRequest|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void initiateDataPathRequest(in char cmdId, in NanInitiateDataPathRequest msg);
+
+    /**
+     * Requests notifications of significant events on this iface. Multiple calls
+     * to this must register multiple callbacks, each of which must receive all
+     * events.
+     *
+     * @param callback An instance of the |IWifiNanIfaceEventCallback| AIDL interface
+     *        object.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
+     */
+    void registerEventCallback(in IWifiNanIfaceEventCallback callback);
+
+    /**
+     * Respond to a received data indication as part of a data-path (NDP) setup operation.
+     * An indication is received by the Responder from the Initiator.
+     * Asynchronous response is with
+     * |IWifiNanIfaceEventCallback.notifyRespondToDataPathIndicationResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param msg Instance of |NanRespondToDataPathIndicationRequest|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void respondToDataPathIndicationRequest(
+            in char cmdId, in NanRespondToDataPathIndicationRequest msg);
+
+    /**
+     * Publish request to start advertising a discovery service.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyStartPublishResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param msg Instance of |NanPublishRequest|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void startPublishRequest(in char cmdId, in NanPublishRequest msg);
+
+    /**
+     * Subscribe request to start searching for a discovery service.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyStartSubscribeResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param msg Instance of |NanSubscribeRequest|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void startSubscribeRequest(in char cmdId, in NanSubscribeRequest msg);
+
+    /**
+     * Stop publishing a discovery service.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyStopPublishResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param sessionId ID of the publish discovery session to be stopped.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void stopPublishRequest(in char cmdId, in byte sessionId);
+
+    /**
+     * Stop subscribing to a discovery service.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyStopSubscribeResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param sessionId ID of the subscribe discovery session to be stopped.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void stopSubscribeRequest(in char cmdId, in byte sessionId);
+
+    /**
+     * Data-path (NDP) termination request. Executed by either Initiator or Responder.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyTerminateDataPathResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param ndpInstanceId Data-path instance ID to be terminated.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void terminateDataPathRequest(in char cmdId, in int ndpInstanceId);
+
+    /**
+     * NAN transmit follow up message request.
+     * Asynchronous response is with |IWifiNanIfaceEventCallback.notifyTransmitFollowupResponse|.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param msg Instance of |NanTransmitFollowupRequest|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void transmitFollowupRequest(in char cmdId, in NanTransmitFollowupRequest msg);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiNanIfaceEventCallback.aidl b/wifi/aidl/android/hardware/wifi/IWifiNanIfaceEventCallback.aidl
new file mode 100644
index 0000000..470b7ba
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiNanIfaceEventCallback.aidl
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanCapabilities;
+import android.hardware.wifi.NanClusterEventInd;
+import android.hardware.wifi.NanDataPathConfirmInd;
+import android.hardware.wifi.NanDataPathRequestInd;
+import android.hardware.wifi.NanDataPathScheduleUpdateInd;
+import android.hardware.wifi.NanFollowupReceivedInd;
+import android.hardware.wifi.NanMatchInd;
+import android.hardware.wifi.NanStatus;
+
+/**
+ * NAN Response and Asynchronous Event Callbacks.
+ *
+ * References to "NAN Spec" are to the Wi-Fi Alliance "Wi-Fi Neighbor Awareness
+ * Networking (NAN) Technical Specification".
+ */
+@VintfStability
+oneway interface IWifiNanIfaceEventCallback {
+    /**
+     * Callback indicating that a cluster event has been received.
+     *
+     * @param event NanClusterEventInd containing event details.
+     */
+    void eventClusterEvent(in NanClusterEventInd event);
+
+    /**
+     * Callback indicating that a data-path (NDP) setup has been completed.
+     * Received by both Initiator and Responder.
+     *
+     * @param event NanDataPathConfirmInd containing event details.
+     */
+    void eventDataPathConfirm(in NanDataPathConfirmInd event);
+
+    /**
+     * Callback indicating that a data-path (NDP) setup has been requested by
+     * an Initiator peer (received by the intended Responder).
+     *
+     * @param event NanDataPathRequestInd containing event details.
+     */
+    void eventDataPathRequest(in NanDataPathRequestInd event);
+
+    /**
+     * Callback indicating that a data-path (NDP) schedule has been updated
+     * (e.g. channels have been changed).
+     *
+     * @param event NanDataPathScheduleUpdateInd containing event details.
+     */
+    void eventDataPathScheduleUpdate(in NanDataPathScheduleUpdateInd event);
+
+    /**
+     * Callback indicating that a list of data-paths (NDP) have been terminated.
+     * Received by both Initiator and Responder.
+     *
+     * @param ndpInstanceId Data-path ID of the terminated data-path.
+     */
+    void eventDataPathTerminated(in int ndpInstanceId);
+
+    /**
+     * Callback indicating that a NAN has been disabled.
+     *
+     * @param status NanStatus describing the reason for the disable event.
+     *               Possible status codes are:
+     *               |NanStatusCode.SUCCESS|
+     *               |NanStatusCode.UNSUPPORTED_CONCURRENCY_NAN_DISABLED|
+     */
+    void eventDisabled(in NanStatus status);
+
+    /**
+     * Callback indicating that a followup message has been received from a peer.
+     *
+     * @param event NanFollowupReceivedInd containing event details.
+     */
+    void eventFollowupReceived(in NanFollowupReceivedInd event);
+
+    /**
+     * Callback indicating that a match has occurred: i.e. a service has been
+     * discovered.
+     *
+     * @param event NanMatchInd containing event details.
+     */
+    void eventMatch(in NanMatchInd event);
+
+    /**
+     * Callback indicating that a previously discovered match (service) has expired.
+     *
+     * @param discoverySessionId Discovery session ID of the expired match.
+     * @param peerId Peer ID of the expired match.
+     */
+    void eventMatchExpired(in byte discoverySessionId, in int peerId);
+
+    /**
+     * Callback indicating that an active publish session has terminated.
+     *
+     * @param sessionId Discovery session ID of the terminated session.
+     * @param status NanStatus describing the reason for the session termination.
+     *               Possible status codes are:
+     *               |NanStatusCode.SUCCESS|
+     */
+    void eventPublishTerminated(in byte sessionId, in NanStatus status);
+
+    /**
+     * Callback indicating that an active subscribe session has terminated.
+     *
+     * @param sessionId Discovery session ID of the terminated session.
+     * @param status NanStatus describing the reason for the session termination.
+     *               Possible status codes are:
+     *               |NanStatusCode.SUCCESS|
+     */
+    void eventSubscribeTerminated(in byte sessionId, in NanStatus status);
+
+    /**
+     * Callback providing status on a completed followup message transmit operation.
+     *
+     * @param cmdId Command Id corresponding to the original |transmitFollowupRequest| request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *               |NanStatusCode.SUCCESS|
+     *               |NanStatusCode.NO_OTA_ACK|
+     *               |NanStatusCode.PROTOCOL_FAILURE|
+     */
+    void eventTransmitFollowup(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to a capability request
+     * |IWifiNanIface.getCapabilitiesRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     * @param capabilities Capability data.
+     */
+    void notifyCapabilitiesResponse(
+            in char id, in NanStatus status, in NanCapabilities capabilities);
+
+    /**
+     * Callback invoked in response to a config request |IWifiNanIface.configRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     */
+    void notifyConfigResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to a create data interface request
+     * |IWifiNanIface.createDataInterfaceRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     */
+    void notifyCreateDataInterfaceResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to a delete data interface request
+     * |IWifiNanIface.deleteDataInterfaceRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     */
+    void notifyDeleteDataInterfaceResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to a disable request |IWifiNanIface.disableRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     */
+    void notifyDisableResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to an enable request |IWifiNanIface.enableRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.ALREADY_ENABLED|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     *        |NanStatusCode.NAN_NOT_ALLOWED|
+     */
+    void notifyEnableResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to an initiate data path request
+     * |IWifiNanIface.initiateDataPathRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     *        |NanStatusCode.INVALID_PEER_ID|
+     * @param ndpInstanceId ID of the new data path being negotiated (on successful status).
+     */
+    void notifyInitiateDataPathResponse(in char id, in NanStatus status, in int ndpInstanceId);
+
+    /**
+     * Callback invoked in response to a respond to data path indication request
+     * |IWifiNanIface.respondToDataPathIndicationRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     *        |NanStatusCode.INVALID_NDP_ID|
+     */
+    void notifyRespondToDataPathIndicationResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked to notify the status of the start publish request
+     * |IWifiNanIface.startPublishRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     *        |NanStatusCode.NO_RESOURCES_AVAILABLE|
+     *        |NanStatusCode.INVALID_SESSION_ID|
+     * @param sessionId ID of the new publish session (if successfully created).
+     */
+    void notifyStartPublishResponse(in char id, in NanStatus status, in byte sessionId);
+
+    /**
+     * Callback invoked to notify the status of the start subscribe request
+     * |IWifiNanIface.startSubscribeRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     *        |NanStatusCode.NO_RESOURCES_AVAILABLE|
+     *        |NanStatusCode.INVALID_SESSION_ID|
+     * @param sessionId ID of the new subscribe session (if successfully created).
+     */
+    void notifyStartSubscribeResponse(in char id, in NanStatus status, in byte sessionId);
+
+    /**
+     * Callback invoked in response to a stop publish request
+     * |IWifiNanIface.stopPublishRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_SESSION_ID|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     */
+    void notifyStopPublishResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to a stop subscribe request
+     * |IWifiNanIface.stopSubscribeRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_SESSION_ID|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     */
+    void notifyStopSubscribeResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to a terminate data path request
+     * |IWifiNanIface.terminateDataPathRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     *        |NanStatusCode.PROTOCOL_FAILURE|
+     *        |NanStatusCode.INVALID_NDP_ID|
+     */
+    void notifyTerminateDataPathResponse(in char id, in NanStatus status);
+
+    /**
+     * Callback invoked in response to a transmit followup request
+     * |IWifiNanIface.transmitFollowupRequest|.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param status NanStatus of the operation. Possible status codes are:
+     *        |NanStatusCode.SUCCESS|
+     *        |NanStatusCode.INVALID_ARGS|
+     *        |NanStatusCode.INTERNAL_FAILURE|
+     *        |NanStatusCode.INVALID_SESSION_ID|
+     *        |NanStatusCode.INVALID_PEER_ID|
+     *        |NanStatusCode.FOLLOWUP_TX_QUEUE_FULL|
+     */
+    void notifyTransmitFollowupResponse(in char id, in NanStatus status);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiP2pIface.aidl b/wifi/aidl/android/hardware/wifi/IWifiP2pIface.aidl
new file mode 100644
index 0000000..287f41d
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiP2pIface.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Interface used to represent a single P2P iface.
+ */
+@VintfStability
+interface IWifiP2pIface {
+    /**
+     * Get the name of this iface.
+     *
+     * @return Name of this iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
+     */
+    String getName();
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiRttController.aidl b/wifi/aidl/android/hardware/wifi/IWifiRttController.aidl
new file mode 100644
index 0000000..99e1a81
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiRttController.aidl
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.IWifiRttControllerEventCallback;
+import android.hardware.wifi.IWifiStaIface;
+import android.hardware.wifi.MacAddress;
+import android.hardware.wifi.RttCapabilities;
+import android.hardware.wifi.RttConfig;
+import android.hardware.wifi.RttLciInformation;
+import android.hardware.wifi.RttLcrInformation;
+import android.hardware.wifi.RttResponder;
+import android.hardware.wifi.WifiChannelInfo;
+
+/**
+ * Interface used to perform RTT (Round trip time) operations.
+ */
+@VintfStability
+interface IWifiRttController {
+    /**
+     * Disable RTT responder mode.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void disableResponder(in int cmdId);
+
+    /**
+     * Enable RTT responder mode.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @parm channelHint Hint for the channel information where RTT responder
+     *       must be enabled on.
+     * @param maxDurationInSeconds Timeout of responder mode.
+     * @param info Instance of |RttResponderInfo|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void enableResponder(in int cmdId, in WifiChannelInfo channelHint, in int maxDurationInSeconds,
+            in RttResponder info);
+
+    /**
+     * Get the iface on which the RTT operations must be performed.
+     *
+     * @return AIDL interface object representing the iface if bound
+     *         to a specific iface, null otherwise
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|
+     */
+    IWifiStaIface getBoundIface();
+
+    /**
+     * RTT capabilities of the device.
+     *
+     * @return Instance of |RttCapabilities|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    RttCapabilities getCapabilities();
+
+    /**
+     * Get RTT responder information (e.g. WiFi channel) to enable responder on.
+     *
+     * @return Instance of |RttResponderInfo|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    RttResponder getResponderInfo();
+
+    /**
+     * API to cancel RTT measurements.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param addrs Vector of addresses for which to cancel.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void rangeCancel(in int cmdId, in MacAddress[] addrs);
+
+    /**
+     * API to request RTT measurement.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param rttConfigs Vector of |RttConfig| parameters.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void rangeRequest(in int cmdId, in RttConfig[] rttConfigs);
+
+    /**
+     * Requests notifications of significant events on this RTT controller.
+     * Multiple calls to this must register multiple callbacks, each of which
+     * must receive all events.
+     *
+     * @param callback An instance of the |IWifiRttControllerEventCallback| AIDL
+     *        interface object.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
+     */
+    void registerEventCallback(in IWifiRttControllerEventCallback callback);
+
+    /**
+     * API to configure the LCI (Location civic information).
+     * Used in RTT Responder mode only.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param lci Instance of |RttLciInformation|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void setLci(in int cmdId, in RttLciInformation lci);
+
+    /**
+     * API to configure the LCR (Location civic records).
+     * Used in RTT Responder mode only.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param lcr Instance of |RttLcrInformation|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_RTT_CONTROLLER_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void setLcr(in int cmdId, in RttLcrInformation lcr);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiRttControllerEventCallback.aidl b/wifi/aidl/android/hardware/wifi/IWifiRttControllerEventCallback.aidl
new file mode 100644
index 0000000..89f0ed8
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiRttControllerEventCallback.aidl
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.RttResult;
+
+/**
+ * RTT Response and Event Callbacks.
+ */
+@VintfStability
+oneway interface IWifiRttControllerEventCallback {
+    /**
+     * Invoked when an RTT result is available.
+     *
+     * @param cmdId Command Id corresponding to the original request.
+     * @param results Vector of |RttResult| instances.
+     */
+    void onResults(in int cmdId, in RttResult[] results);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiStaIface.aidl b/wifi/aidl/android/hardware/wifi/IWifiStaIface.aidl
new file mode 100644
index 0000000..2dd57b2
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiStaIface.aidl
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.IWifiStaIfaceEventCallback;
+import android.hardware.wifi.StaApfPacketFilterCapabilities;
+import android.hardware.wifi.StaBackgroundScanCapabilities;
+import android.hardware.wifi.StaBackgroundScanParameters;
+import android.hardware.wifi.StaLinkLayerStats;
+import android.hardware.wifi.StaRoamingCapabilities;
+import android.hardware.wifi.StaRoamingConfig;
+import android.hardware.wifi.StaRoamingState;
+import android.hardware.wifi.WifiBand;
+import android.hardware.wifi.WifiDebugRxPacketFateReport;
+import android.hardware.wifi.WifiDebugTxPacketFateReport;
+
+/**
+ * Interface used to represent a single STA iface.
+ */
+@VintfStability
+interface IWifiStaIface {
+    /**
+     * Mask of capabilities supported by this iface.
+     */
+    @VintfStability
+    @Backing(type="int")
+    enum StaIfaceCapabilityMask {
+        /**
+         * Support for APF APIs. APF (Android Packet Filter) is a
+         * BPF-like packet filtering bytecode executed by the firmware.
+         */
+        APF = 1 << 0,
+        /**
+         * Support for Background Scan APIs. Background scan allows the host
+         * to send a number of buckets down to the firmware. Each bucket
+         * contains a set of channels, a period, and some parameters about
+         * how and when to report results.
+         */
+        BACKGROUND_SCAN = 1 << 1,
+        /**
+         * Support for link layer stats APIs.
+         */
+        LINK_LAYER_STATS = 1 << 2,
+        /**
+         * Support for RSSI monitor APIs.
+         */
+        RSSI_MONITOR = 1 << 3,
+        /**
+         * Support for roaming APIs.
+         */
+        CONTROL_ROAMING = 1 << 4,
+        /**
+         * Support for Probe IE allow-listing.
+         */
+        PROBE_IE_ALLOWLIST = 1 << 5,
+        /**
+         * Support for MAC & Probe Sequence Number randomization.
+         */
+        SCAN_RAND = 1 << 6,
+        /**
+         * Support for 5 GHz Band.
+         */
+        STA_5G = 1 << 7,
+        /**
+         * Support for GAS/ANQP queries.
+         */
+        HOTSPOT = 1 << 8,
+        /**
+         * Support for Preferred Network Offload.
+         */
+        PNO = 1 << 9,
+        /**
+         * Support for Tunneled Direct Link Setup.
+         */
+        TDLS = 1 << 10,
+        /**
+         * Support for Tunneled Direct Link Setup off channel.
+         */
+        TDLS_OFFCHANNEL = 1 << 11,
+        /**
+         * Support for neighbour discovery offload.
+         */
+        ND_OFFLOAD = 1 << 12,
+        /**
+         * Support for keep alive packet offload.
+         */
+        KEEP_ALIVE = 1 << 13,
+        /**
+         * Support for tracking connection packets' fate.
+         */
+        DEBUG_PACKET_FATE = 1 << 14,
+    }
+
+    /**
+     * Get the name of this iface.
+     *
+     * @return Name of this iface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
+     */
+    String getName();
+
+    /**
+     * Configure roaming control parameters.
+     * Must fail if |StaIfaceCapabilityMask.CONTROL_ROAMING| is not set.
+     *
+     * @param config Instance of |StaRoamingConfig|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void configureRoaming(in StaRoamingConfig config);
+
+    /**
+     * Disable link layer stats collection.
+     * Must fail if |StaIfaceCapabilityMask.LINK_LAYER_STATS| is not set.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_STARTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void disableLinkLayerStatsCollection();
+
+    /**
+     * Enable link layer stats collection.
+     * Must fail if |StaIfaceCapabilityMask.LINK_LAYER_STATS| is not set.
+     *
+     * Radio statistics (once started) must not stop until disabled.
+     * Iface statistics (once started) reset and start afresh after each
+     * connection until disabled.
+     *
+     * @param debug true to enable field debug mode, false to disable. Driver
+     *        must collect all statistics regardless of performance impact.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void enableLinkLayerStatsCollection(in boolean debug);
+
+    /**
+     * Enable/Disable neighbour discovery offload functionality in the firmware.
+     *
+     * @param enable true to enable, false to disable.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void enableNdOffload(in boolean enable);
+
+    /**
+     * Used to query additional information about the chip's APF capabilities.
+     * Must fail if |StaIfaceCapabilityMask.APF| is not set.
+     *
+     * @return Instance of |StaApfPacketFilterCapabilities|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    StaApfPacketFilterCapabilities getApfPacketFilterCapabilities();
+
+    /**
+     * Used to query additional information about the chip's Background Scan capabilities.
+     * Must fail if |StaIfaceCapabilityMask.BACKGROUND_SCAN| is not set.
+     *
+     * @return Instance of |StaBackgroundScanCapabilities|
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    StaBackgroundScanCapabilities getBackgroundScanCapabilities();
+
+    /**
+     * Get the capabilities supported by this STA iface.
+     *
+     * @return Bitset of |StaIfaceCapabilityMask| values.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    StaIfaceCapabilityMask getCapabilities();
+
+    /**
+     * API to retrieve the fates of inbound packets.
+     * - HAL implementation must return the fates of
+     *   all the frames received for the most recent association.
+     *   The fate reports must follow the same order as their respective
+     *   packets.
+     * - HAL implementation may choose (but is not required) to include
+     *   reports for management frames.
+     * - Packets reported by firmware, but not recognized by driver,
+     *   must be included. However, the ordering of the corresponding
+     *   reports is at the discretion of HAL implementation.
+     * - Framework must be able to call this API multiple times for the same
+     *   association.
+     *
+     * @return Vector of |WifiDebugRxPacketFateReport| instances corresponding
+     *         to the packet fates.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_STARTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    WifiDebugRxPacketFateReport[] getDebugRxPacketFates();
+
+    /**
+     * API to retrieve fates of outbound packets.
+     * - HAL implementation must return the fates of
+     *   all the frames transmitted for the most recent association.
+     *   The fate reports must follow the same order as their respective
+     *   packets.
+     * - HAL implementation may choose (but is not required) to include
+     *   reports for management frames.
+     * - Packets reported by firmware, but not recognized by driver,
+     *   must be included. However, the ordering of the corresponding
+     *   reports is at the discretion of HAL implementation.
+     * - Framework must be able to call this API multiple times for the same
+     *   association.
+     *
+     * @return Vector of |WifiDebugTxPacketFateReport| instances corresponding
+     *         to the packet fates.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_STARTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    WifiDebugTxPacketFateReport[] getDebugTxPacketFates();
+
+    /**
+     * Gets the factory MAC address of the STA interface.
+     *
+     * @return Factory MAC address of the STA interface.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    byte[6] getFactoryMacAddress();
+
+    /**
+     * Retrieve the latest link layer stats.
+     * Must fail if |StaIfaceCapabilityMask.LINK_LAYER_STATS| is not set or if
+     * link layer stats collection hasn't been explicitly enabled.
+     *
+     * @return Instance of |LinkLayerStats|.
+     * @throws ServiceSpecificException with one of the following values:
+     *     |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *     |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *     |WifiStatusCode.ERROR_NOT_STARTED|,
+     *     |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *     |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    StaLinkLayerStats getLinkLayerStats();
+
+    /**
+     * Get roaming control capabilities.
+     * Must fail if |StaIfaceCapabilityMask.CONTROL_ROAMING| is not set.
+     *
+     * @return Instance of |StaRoamingCapabilities|.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    StaRoamingCapabilities getRoamingCapabilities();
+
+    /**
+     * Used to query the list of valid frequencies (depending on the country
+     * code set) for the provided band. These channels may be specified in the
+     * |BackgroundScanBucketParameters.frequenciesInMhz| for a background scan
+     * request.
+     *
+     * @param band Band for which the frequency list is being generated.
+     * @return Vector of valid frequencies for the provided band.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    int[] getValidFrequenciesForBand(in WifiBand band);
+
+    /**
+     * Installs an APF program on this iface, replacing an existing
+     * program if present.
+     * Must fail if |StaIfaceCapabilityMask.APF| is not set.
+     *
+     * APF docs
+     * ==========================================================================
+     * APF functionality, instructions and bytecode/binary format is described in:
+     * http://android.googlesource.com/platform/hardware/google/apf/
+     * +/b75c9f3714cfae3dad3d976958e063150781437e/apf.h
+     *
+     * The interpreter API is described here:
+     * http://android.googlesource.com/platform/hardware/google/apf/+/
+     * b75c9f3714cfae3dad3d976958e063150781437e/apf_interpreter.h#32
+     *
+     * The assembler/generator API is described in javadocs here:
+     * http://android.googlesource.com/platform/frameworks/base/+/
+     * 4456f33a958a7f09e608399da83c4d12b2e7d191/services/net/java/android/net/
+     * apf/ApfGenerator.java
+     *
+     * Disassembler usage is described here:
+     * http://android.googlesource.com/platform/hardware/google/apf/+/
+     * b75c9f3714cfae3dad3d976958e063150781437e/apf_disassembler.c#65
+     *
+     * The BPF to APF translator usage is described here:
+     * http://android.googlesource.com/platform/frameworks/base/+/
+     * 4456f33a958a7f09e608399da83c4d12b2e7d191/tests/net/java/android/net/
+     * apf/Bpf2Apf.java
+     * ==========================================================================
+     *
+     * @param program APF Program to be set.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void installApfPacketFilter(in byte[] program);
+
+    /**
+     * Fetches a consistent snapshot of the entire APF program and working
+     * memory buffer and returns it to the host. The returned buffer contains
+     * both code and data. Its length must match the most recently returned
+     * |StaApfPacketFilterCapabilities.maxLength|.
+     *
+     * While the snapshot is being fetched, the APF interpreter must not execute
+     * and all incoming packets must be passed to the host as if there was no
+     * APF program installed.
+     *
+     * Must fail with |WifiStatusCode.ERROR_NOT_SUPPORTED| if
+     * |StaIfaceCapabilityMask.APF| is not set.
+     *
+     * @return The entire APF working memory buffer when status is
+     *         |WifiStatusCode.SUCCESS|, empty otherwise.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     * @see getApfPacketFilterCapabilities()
+     * @see installApfPacketFilter()
+     */
+    byte[] readApfPacketFilterData();
+
+    /**
+     * Requests notifications of significant events on this iface. Multiple calls
+     * to this must register multiple callbacks, each of which must receive all
+     * events.
+     *
+     * @param callback An instance of the |IWifiStaIfaceEventCallback| AIDL
+     *        interface object.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
+     */
+    void registerEventCallback(in IWifiStaIfaceEventCallback callback);
+
+    /**
+     * Changes the MAC address of the STA Interface to the given
+     * MAC address.
+     *
+     * @param mac MAC address to change to.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void setMacAddress(in byte[6] mac);
+
+    /**
+     * Set the roaming control state with the parameters configured
+     * using |configureRoaming|. Depending on the roaming state set, the
+     * driver/firmware would enable/disable control over roaming decisions.
+     * Must fail if |StaIfaceCapabilityMask.CONTROL_ROAMING| is not set.
+     *
+     * @param state State of the roaming control.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_BUSY|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void setRoamingState(in StaRoamingState state);
+
+    /**
+     * Turn on/off scan only mode for the interface.
+     *
+     * @param enable True to enable scan only mode, false to disable.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.FAILURE_UNKNOWN|
+     */
+    void setScanMode(in boolean enable);
+
+    /**
+     * Start a background scan using the given cmdId as an identifier. Only one
+     * active background scan need be supported.
+     * Must fail if |StaIfaceCapabilityMask.BACKGROUND_SCAN| is not set.
+     *
+     * When this is called all requested buckets must be scanned, starting the
+     * beginning of the cycle.
+     *
+     * For example:
+     * If there are two buckets specified
+     *  - Bucket 1: period=10s
+     *  - Bucket 2: period=20s
+     *  - Bucket 3: period=30s
+     * Then the following scans must occur
+     *  - t=0  buckets 1, 2, and 3 are scanned
+     *  - t=10 bucket 1 is scanned
+     *  - t=20 bucket 1 and 2 are scanned
+     *  - t=30 bucket 1 and 3 are scanned
+     *  - t=40 bucket 1 and 2 are scanned
+     *  - t=50 bucket 1 is scanned
+     *  - t=60 buckets 1, 2, and 3 are scanned
+     *  - and the pattern repeats
+     *
+     * If any scan does not occur or is incomplete (error, interrupted, etc),
+     * then a cached scan result must still be recorded with the
+     * WIFI_SCAN_FLAG_INTERRUPTED flag set.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param params Background scan parameters.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_INVALID_ARGS|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void startBackgroundScan(in int cmdId, in StaBackgroundScanParameters params);
+
+    /**
+     * API to start packet fate monitoring.
+     * - Once started, monitoring must remain active until HAL is stopped or the
+     *   chip is reconfigured.
+     * - When HAL is unloaded, all packet fate buffers must be cleared.
+     * - The packet fates are used to monitor the state of packets transmitted/
+     *   received during association.
+     *
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void startDebugPacketFateMonitoring();
+
+    /**
+     * Start RSSI monitoring on the currently connected access point.
+     * Once the monitoring is enabled, the
+     * |IWifiStaIfaceEventCallback.onRssiThresholdBreached| callback must be
+     * invoked to indicate if the RSSI goes above |maxRssi| or below |minRssi|.
+     * Must fail if |StaIfaceCapabilityMask.RSSI_MONITOR| is not set.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param maxRssi Maximum RSSI threshold.
+     * @param minRssi Minimum RSSI threshold.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_ARGS_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void startRssiMonitoring(in int cmdId, in int maxRssi, in int minRssi);
+
+    /**
+     * Start sending the specified keep alive packets periodically.
+     *
+     * @param cmdId Command Id to use for this invocation.
+     * @param ipPacketData IP packet contents to be transmitted.
+     * @param etherType 16 bit ether type to be set in the ethernet frame
+     *        transmitted.
+     * @param srcAddress Source MAC address of the packet.
+     * @param dstAddress Destination MAC address of the packet.
+     * @param periodInMs Interval at which this packet must be transmitted.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void startSendingKeepAlivePackets(in int cmdId, in byte[] ipPacketData, in char etherType,
+            in byte[6] srcAddress, in byte[6] dstAddress, in int periodInMs);
+
+    /**
+     * Stop the current background scan.
+     * Must fail if |StaIfaceCapabilityMask.BACKGROUND_SCAN| is not set.
+     *
+     * @param cmdId Command Id corresponding to the request.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_STARTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void stopBackgroundScan(in int cmdId);
+
+    /**
+     * Stop RSSI monitoring.
+     * Must fail if |StaIfaceCapabilityMask.RSSI_MONITOR| is not set.
+     *
+     * @param cmdId Command Id corresponding to the request.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_STARTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void stopRssiMonitoring(in int cmdId);
+
+    /**
+     * Stop sending the specified keep alive packets.
+     *
+     * @param cmdId Command Id corresponding to the request.
+     * @throws ServiceSpecificException with one of the following values:
+     *         |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     */
+    void stopSendingKeepAlivePackets(in int cmdId);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IWifiStaIfaceEventCallback.aidl b/wifi/aidl/android/hardware/wifi/IWifiStaIfaceEventCallback.aidl
new file mode 100644
index 0000000..93a255f
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IWifiStaIfaceEventCallback.aidl
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.StaScanData;
+import android.hardware.wifi.StaScanResult;
+
+@VintfStability
+oneway interface IWifiStaIfaceEventCallback {
+    /**
+     * Called for each received beacon/probe response for a scan with the
+     * |REPORT_EVENTS_FULL_RESULTS| flag set in
+     * |StaBackgroundScanBucketParameters.eventReportScheme|.
+     *
+     * @param cmdId Command Id corresponding to the request.
+     * @param bucketsScanned Bitset where each bit indicates if the bucket with
+     *        that index (starting at 0) was scanned.
+     * @param result Full scan result for an AP.
+     */
+    void onBackgroundFullScanResult(in int cmdId, in int bucketsScanned, in StaScanResult result);
+
+    /**
+     * Callback indicating that an ongoing background scan request has failed.
+     * The background scan needs to be restarted to continue scanning.
+     *
+     * @param cmdId Command Id corresponding to the request.
+     */
+    void onBackgroundScanFailure(in int cmdId);
+
+    /**
+     * Called when the |StaBackgroundScanBucketParameters.eventReportScheme| flags
+     * for at least one bucket that was just scanned was
+     * |REPORT_EVENTS_EACH_SCAN|, or one of the configured thresholds was
+     * breached.
+     *
+     * @param cmdId Command Id corresponding to the request.
+     * @param scanDatas List of scan result for all AP's seen since last callback.
+     */
+    void onBackgroundScanResults(in int cmdId, in StaScanData[] scanDatas);
+
+    /**
+     * Called when the RSSI of the currently connected access point goes beyond the
+     * thresholds set via |IWifiStaIface.startRssiMonitoring|.
+     *
+     * @param cmdId Command Id corresponding to the request.
+     * @param currBssid BSSID of the currently connected access point.
+     * @param currRssi RSSI of the currently connected access point.
+     */
+    void onRssiThresholdBreached(in int cmdId, in byte[6] currBssid, in int currRssi);
+}
diff --git a/wifi/aidl/android/hardware/wifi/IfaceConcurrencyType.aidl b/wifi/aidl/android/hardware/wifi/IfaceConcurrencyType.aidl
new file mode 100644
index 0000000..26c183c
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IfaceConcurrencyType.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * List of interface concurrency types, used in reporting device concurrency capabilities.
+ */
+@VintfStability
+@Backing(type="int")
+enum IfaceConcurrencyType {
+    /**
+     * Concurrency type for station mode.
+     */
+    STA,
+    /**
+     * Concurrency type of single-port AP mode.
+     */
+    AP,
+    /**
+     * Concurrency type of two-port bridged AP mode.
+     */
+    AP_BRIDGED,
+    /**
+     * Concurrency type of peer-to-peer mode.
+     */
+    P2P,
+    /**
+     * Concurrency type of neighborhood area network mode.
+     */
+    NAN_IFACE,
+}
diff --git a/wifi/aidl/android/hardware/wifi/IfaceType.aidl b/wifi/aidl/android/hardware/wifi/IfaceType.aidl
new file mode 100644
index 0000000..c89d94b
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/IfaceType.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * List of supported interface types.
+ */
+@VintfStability
+@Backing(type="int")
+enum IfaceType {
+    STA,
+    AP,
+    P2P,
+    /**
+     * NAN control interface. Datapath support must be queried and created
+     * through this interface. Declared as 'NAN_IFACE' instead of 'NAN'
+     * because the compiler complains that NAN is already defined by math.h
+     */
+    NAN_IFACE,
+}
diff --git a/wifi/aidl/android/hardware/wifi/MacAddress.aidl b/wifi/aidl/android/hardware/wifi/MacAddress.aidl
new file mode 100644
index 0000000..d59dfe3
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/MacAddress.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Byte array representing a Mac Address. Use when we need to
+ * pass an array of Mac Addresses to a method, as variable-sized
+ * 2D arrays are not supported in AIDL.
+ *
+ * TODO (b/210705533): Replace this type with a 2D byte array.
+ */
+@VintfStability
+parcelable MacAddress {
+    byte[6] data;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanBandIndex.aidl b/wifi/aidl/android/hardware/wifi/NanBandIndex.aidl
new file mode 100644
index 0000000..5da5869
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanBandIndex.aidl
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * The discovery bands supported by NAN.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanBandIndex {
+    NAN_BAND_24GHZ = 0,
+    NAN_BAND_5GHZ,
+    /**
+     * Index for 6 GHz band.
+     */
+    NAN_BAND_6GHZ = 2,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanBandSpecificConfig.aidl b/wifi/aidl/android/hardware/wifi/NanBandSpecificConfig.aidl
new file mode 100644
index 0000000..2e13486
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanBandSpecificConfig.aidl
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN band-specific configuration.
+ */
+@VintfStability
+parcelable NanBandSpecificConfig {
+    /**
+     * RSSI values controlling clustering behavior per spec. RSSI values are specified without a
+     * sign, e.g. a value of -65dBm would be specified as 65.
+     */
+    byte rssiClose;
+    byte rssiMiddle;
+    /**
+     * RSSI value determining whether discovery is near (used if enabled in discovery by
+     * |NanDiscoveryCommonConfig.useRssiThreshold|).
+     * RSSI values are specified without a sign, e.g. a value of -65dBm would be specified as 65.
+     * NAN Spec: RSSI_close_proximity
+     */
+    byte rssiCloseProximity;
+    /**
+     * Dwell time of each discovery channel in milliseconds. If set to 0, then the firmware
+     * determines the dwell time to use.
+     */
+    char dwellTimeMs;
+    /**
+     * Scan period of each discovery channel in seconds. If set to 0, then the firmware determines
+     * the scan period to use.
+     */
+    char scanPeriodSec;
+    /**
+     * Specifies the discovery window interval for Sync beacons and SDF's.
+     * Valid values of DW Interval are: 1, 2, 3, 4 and 5 corresponding to 1, 2, 4, 8, and 16 DWs.
+     * Value of 0:
+     *  - reserved in 2.4GHz band
+     *  - no wakeup at all in 5GHz band
+     * The publish/subscribe period values don't override the device level configurations if
+     * they are specified.
+     * Configuration is only used only if |validDiscoveryWindowIntervalVal| is set to true.
+     * NAN Spec: Device Capability Attribute / 2.4 GHz DW, Device Capability Attribute / 5 GHz DW
+     */
+    boolean validDiscoveryWindowIntervalVal;
+    byte discoveryWindowIntervalVal;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanCapabilities.aidl b/wifi/aidl/android/hardware/wifi/NanCapabilities.aidl
new file mode 100644
index 0000000..6042a05
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanCapabilities.aidl
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanCipherSuiteType;
+
+/**
+ * NDP Capabilities response.
+ */
+@VintfStability
+parcelable NanCapabilities {
+    /**
+     * Maximum number of clusters which the device can join concurrently.
+     */
+    int maxConcurrentClusters;
+    /**
+     * Maximum number of concurrent publish discovery sessions.
+     */
+    int maxPublishes;
+    /**
+     * Maximum number of concurrent subscribe discovery sessions.
+     */
+    int maxSubscribes;
+    /**
+     * Maximum length (in bytes) of service name.
+     */
+    int maxServiceNameLen;
+    /**
+     * Maximum length (in bytes) of individual match filters.
+     */
+    int maxMatchFilterLen;
+    /**
+     * Maximum length (in bytes) of aggregate match filters across all active sessions.
+     */
+    int maxTotalMatchFilterLen;
+    /**
+     * Maximum length (in bytes) of the service specific info field.
+     */
+    int maxServiceSpecificInfoLen;
+    /**
+     * Maximum length (in bytes) of the extended service specific info field.
+     */
+    int maxExtendedServiceSpecificInfoLen;
+    /**
+     * Maximum number of data interfaces (NDI) which can be created concurrently on the device.
+     */
+    int maxNdiInterfaces;
+    /**
+     * Maximum number of data paths (NDP) which can be created concurrently on the device, across
+     * all data interfaces (NDI).
+     */
+    int maxNdpSessions;
+    /**
+     * Maximum length (in bytes) of application info field (used in data-path negotiations).
+     */
+    int maxAppInfoLen;
+    /**
+     * Maximum number of transmitted followup messages which can be queued by the firmware.
+     */
+    int maxQueuedTransmitFollowupMsgs;
+    /**
+     * Maximum number MAC interface addresses which can be specified to a subscribe discovery
+     * session.
+     */
+    int maxSubscribeInterfaceAddresses;
+    /**
+     * The set of supported Cipher suites. The |NanCipherSuiteType| bit fields are used.
+     */
+    NanCipherSuiteType supportedCipherSuites;
+    /**
+     * Flag to indicate id instant communication mode is supported.
+     */
+    boolean instantCommunicationModeSupportFlag;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanCipherSuiteType.aidl b/wifi/aidl/android/hardware/wifi/NanCipherSuiteType.aidl
new file mode 100644
index 0000000..9e3d684
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanCipherSuiteType.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Cipher suite flags.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanCipherSuiteType {
+    NONE = 0,
+    SHARED_KEY_128_MASK = 1 << 0,
+    SHARED_KEY_256_MASK = 1 << 1,
+    /**
+     *  NCS-PK-128
+     */
+    PUBLIC_KEY_128_MASK = 1 << 2,
+    /**
+     *  NCS-PK-256
+     */
+    PUBLIC_KEY_256_MASK = 1 << 3,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanClusterEventInd.aidl b/wifi/aidl/android/hardware/wifi/NanClusterEventInd.aidl
new file mode 100644
index 0000000..76a3034
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanClusterEventInd.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanClusterEventType;
+
+/**
+ * Cluster event indication structure. Triggered on events impacting how this device is
+ * visible to peers - cluster forming, joining a new cluster, or changing of the MAC address.
+ */
+@VintfStability
+parcelable NanClusterEventInd {
+    /**
+     * Event type causing the cluster event indication to be triggered.
+     */
+    NanClusterEventType eventType;
+    /**
+     * MAC Address associated with the corresponding event.
+     */
+    byte[6] addr;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanClusterEventType.aidl b/wifi/aidl/android/hardware/wifi/NanClusterEventType.aidl
new file mode 100644
index 0000000..c07bf17
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanClusterEventType.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Event types for a cluster event indication.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanClusterEventType {
+    /**
+     * Management/discovery interface MAC address has changed
+     * (e.g. due to randomization or at startup).
+     */
+    DISCOVERY_MAC_ADDRESS_CHANGED = 0,
+    /**
+     * A new cluster has been formed by this device.
+     */
+    STARTED_CLUSTER,
+    /**
+     * This device has joined an existing cluster.
+     */
+    JOINED_CLUSTER,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanConfigRequest.aidl b/wifi/aidl/android/hardware/wifi/NanConfigRequest.aidl
new file mode 100644
index 0000000..82a7b6e
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanConfigRequest.aidl
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanBandSpecificConfig;
+
+/**
+ * Configuration parameters of NAN. Used when enabling and re-configuring a NAN cluster.
+ */
+@VintfStability
+parcelable NanConfigRequest {
+    /**
+     * Master preference of this device.
+     * NAN Spec: Master Indication Attribute / Master Preference
+     */
+    byte masterPref;
+    /**
+     * Controls whether or not the |IWifiNanIfaceEventCallback.eventClusterEvent| will be delivered
+     * for |NanClusterEventType.DISCOVERY_MAC_ADDRESS_CHANGED|.
+     */
+    boolean disableDiscoveryAddressChangeIndication;
+    /**
+     * Controls whether or not the |IWifiNanIfaceEventCallback.eventClusterEvent| will be delivered
+     * for |NanClusterEventType.STARTED_CLUSTER|.
+     */
+    boolean disableStartedClusterIndication;
+    /**
+     * Controls whether or not the |IWifiNanIfaceEventCallback.eventClusterEvent| will be delivered
+     * for |NanClusterEventType.JOINED_CLUSTER|.
+     */
+    boolean disableJoinedClusterIndication;
+    /**
+     * Control whether publish service IDs are included in Sync/Discovery beacons.
+     * NAN Spec: Service ID List Attribute
+     */
+    boolean includePublishServiceIdsInBeacon;
+    /**
+     * If |includePublishServiceIdsInBeacon| is true, then specifies the number of publish service
+     * IDs to include in the Sync/Discovery beacons. Value = 0: include as many service IDs as will
+     * fit into the maximum allowed beacon frame size. Value must fit within 7 bits - i.e. <= 127.
+     */
+    byte numberOfPublishServiceIdsInBeacon;
+    /**
+     * Control whether subscribe service IDs are included in Sync/Discovery beacons.
+     * Spec: Subscribe Service ID List Attribute
+     */
+    boolean includeSubscribeServiceIdsInBeacon;
+    /**
+     * If |includeSubscribeServiceIdsInBeacon| is true, then specifies the number of subscribe
+     * service IDs to include in the Sync/Discovery beacons. Value = 0: include as many service IDs
+     * as will fit into the maximum allowed beacon frame size. Value must fit within 7 bits - i.e.
+     * <= 127.
+     */
+    byte numberOfSubscribeServiceIdsInBeacon;
+    /**
+     * Number of samples used to calculate RSSI.
+     */
+    char rssiWindowSize;
+    /**
+     * Specifies the interval in seconds that the NAN management interface MAC address is
+     * randomized. A value of 0 is used to disable the MAC address randomization.
+     */
+    int macAddressRandomizationIntervalSec;
+    /**
+     * Additional configuration provided per band. Indexed by |NanBandIndex|.
+     */
+    NanBandSpecificConfig[3] bandSpecificConfig;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanConfigRequestSupplemental.aidl b/wifi/aidl/android/hardware/wifi/NanConfigRequestSupplemental.aidl
new file mode 100644
index 0000000..eb01a9f
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanConfigRequestSupplemental.aidl
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Additional NAN configuration request parameters.
+ */
+@VintfStability
+parcelable NanConfigRequestSupplemental {
+    /**
+     * Specify the Discovery Beacon interval in ms. Specification only applicable if the device
+     * transmits Discovery Beacons (based on the Wi-Fi Aware protocol selection criteria). The value
+     * can be increased to reduce power consumption (on devices which would transmit Discovery
+     * Beacons). However, cluster synchronization time will likely increase.
+     * Values are:
+     *  - A value of 0 indicates that the HAL sets the interval to a default (implementation
+     * specific).
+     *  - A positive value.
+     */
+    int discoveryBeaconIntervalMs;
+    /**
+     * The number of spatial streams to be used for transmitting NAN management frames (does NOT
+     * apply to data-path packets). A small value may reduce power consumption for small discovery
+     * packets. Values are:
+     *  - A value of 0 indicates that the HAL sets the number to a default (implementation
+     * specific).
+     *  - A positive value.
+     */
+    int numberOfSpatialStreamsInDiscovery;
+    /**
+     * Controls whether the device may terminate listening on a Discovery Window (DW) earlier than
+     * the DW termination (16ms) if no information is received. Enabling the feature will result in
+     * lower power consumption, but may result in some missed messages and hence increased latency.
+     */
+    boolean enableDiscoveryWindowEarlyTermination;
+    /**
+     * Controls whether NAN RTT (ranging) is permitted. Global flag on any NAN RTT operations are
+     * allowed. Controls ranging in the context of discovery as well as direct RTT.
+     */
+    boolean enableRanging;
+    /**
+     * Controls whether NAN instant communication mode is enabled.
+     */
+    boolean enableInstantCommunicationMode;
+    /**
+     * Controls which channel NAN instant communication mode operates on.
+     */
+    int instantModeChannel;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDataPathChannelCfg.aidl b/wifi/aidl/android/hardware/wifi/NanDataPathChannelCfg.aidl
new file mode 100644
index 0000000..3aaea40
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDataPathChannelCfg.aidl
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN DP (data-path) channel config options.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanDataPathChannelCfg {
+    CHANNEL_NOT_REQUESTED = 0,
+    REQUEST_CHANNEL_SETUP,
+    FORCE_CHANNEL_SETUP,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDataPathChannelInfo.aidl b/wifi/aidl/android/hardware/wifi/NanDataPathChannelInfo.aidl
new file mode 100644
index 0000000..e5c3538
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDataPathChannelInfo.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiChannelWidthInMhz;
+
+/**
+ * NAN data path channel information provided to the framework.
+ */
+@VintfStability
+parcelable NanDataPathChannelInfo {
+    /**
+     * Channel frequency in MHz.
+     */
+    int channelFreq;
+    /**
+     * Channel bandwidth in MHz.
+     */
+    WifiChannelWidthInMhz channelBandwidth;
+    /**
+     * Number of spatial streams used in the channel.
+     */
+    int numSpatialStreams;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDataPathConfirmInd.aidl b/wifi/aidl/android/hardware/wifi/NanDataPathConfirmInd.aidl
new file mode 100644
index 0000000..621f036
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDataPathConfirmInd.aidl
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanDataPathChannelInfo;
+import android.hardware.wifi.NanStatus;
+
+/**
+ * NAN Data path confirmation indication structure. Event indication is
+ * received on both initiator and responder side when negotiation for a
+ * data-path finishes on success or failure.
+ */
+@VintfStability
+parcelable NanDataPathConfirmInd {
+    /**
+     * ID of the data-path.
+     */
+    int ndpInstanceId;
+    /**
+     * Indicates whether the data-path setup succeeded (true) or failed (false).
+     */
+    boolean dataPathSetupSuccess;
+    /**
+     * MAC address of the peer's data-interface (not its management/discovery interface).
+     */
+    byte[6] peerNdiMacAddr;
+    /**
+     * Arbitrary information communicated from the peer as part of the data-path setup process -
+     * there is no semantic meaning to these bytes. They are passed-through from sender to receiver
+     * as-is with no parsing. Max length: |NanCapabilities.maxAppInfoLen|. NAN Spec: Data Path
+     * Attributes / NDP Attribute / NDP Specific Info
+     */
+    byte[] appInfo;
+    /**
+     * Failure reason if |dataPathSetupSuccess| is false.
+     */
+    NanStatus status;
+    /**
+     * The channel(s) on which the NDP is scheduled to operate.
+     * Updates to the operational channels are provided using the |eventDataPathScheduleUpdate|
+     * event.
+     */
+    NanDataPathChannelInfo[] channelInfo;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDataPathRequestInd.aidl b/wifi/aidl/android/hardware/wifi/NanDataPathRequestInd.aidl
new file mode 100644
index 0000000..de9ee32
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDataPathRequestInd.aidl
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN Data path request indication message structure.
+ * Event indication received by an intended Responder when a NAN
+ * data request initiated by an Initiator.
+ */
+@VintfStability
+parcelable NanDataPathRequestInd {
+    /**
+     * ID of an active publish or subscribe discovery session. The data-path
+     * request is in the context of this discovery session.
+     * NAN Spec: Data Path Attributes / NDP Attribute / Publish ID
+     */
+    byte discoverySessionId;
+    /**
+     * MAC address of the Initiator peer. This is the MAC address of the peer's
+     * management/discovery NAN interface.
+     */
+    byte[6] peerDiscMacAddr;
+    /**
+     * ID of the data-path. Used to identify the data-path in further negotiation/APIs.
+     */
+    int ndpInstanceId;
+    /**
+     * Specifies whether or not security is required by the peer for the data-path being created.
+     * NAN Spec: Data Path Attributes / NDP Attribute / NDP Control / Security Present
+     */
+    boolean securityRequired;
+    /**
+     * Arbitrary information communicated from the peer as part of the data-path setup process.
+     * Therer is no semantic meaning to these bytes. They are passed-through from sender to
+     * receiver as-is with no parsing.
+     * Max length: |NanCapabilities.maxAppInfoLen|.
+     * NAN Spec: Data Path Attributes / NDP Attribute / NDP Specific Info
+     */
+    byte[] appInfo;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDataPathScheduleUpdateInd.aidl b/wifi/aidl/android/hardware/wifi/NanDataPathScheduleUpdateInd.aidl
new file mode 100644
index 0000000..0f41d8f
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDataPathScheduleUpdateInd.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanDataPathChannelInfo;
+
+/**
+ * NAN data path channel information update indication structure.
+ * Event indication is received by all NDP owners whenever the channels on
+ * which the NDP operates are updated.
+ * Note: Multiple NDPs may share the same schedule. The indication specifies
+ * all NDPs to which it applies.
+ */
+@VintfStability
+parcelable NanDataPathScheduleUpdateInd {
+    /**
+     * The discovery address (NMI) of the peer to which the NDP is connected.
+     */
+    byte[6] peerDiscoveryAddress;
+    /**
+     * The updated channel(s) information.
+     */
+    NanDataPathChannelInfo[] channelInfo;
+    /**
+     * The list of NDPs to which this update applies.
+     */
+    int[] ndpInstanceIds;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDataPathSecurityConfig.aidl b/wifi/aidl/android/hardware/wifi/NanDataPathSecurityConfig.aidl
new file mode 100644
index 0000000..42a5616
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDataPathSecurityConfig.aidl
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanCipherSuiteType;
+import android.hardware.wifi.NanDataPathSecurityType;
+
+/**
+ * Configuration of NAN data-path security.
+ */
+@VintfStability
+parcelable NanDataPathSecurityConfig {
+    /**
+     * Security configuration of the data-path (NDP). Security is enabled if not equal to
+     * |NanDataPathSecurityType.OPEN|.
+     * NAN Spec: Service Discovery Extension Attribute (SDEA) / Control / Security Required
+     */
+    NanDataPathSecurityType securityType;
+    /**
+     * Cipher type for data-paths. If |securityType| is |NanDataPathSecurityType.OPEN| then must
+     * be set to |NanCipherSuiteType.NONE|. Otherwise a non-|NanCipherSuiteType.NONE| cipher suite
+     * must be specified.
+     */
+    NanCipherSuiteType cipherType;
+    /**
+     * Optional Pairwise Master Key (PMK). Must be specified (and is only used) if |securityType| is
+     * set to |NanDataPathSecurityType.PMK|.
+     * Ref: IEEE 802.11i
+     */
+    byte[32] pmk;
+    /**
+     * Optional Passphrase. Must be specified (and is only used) if |securityType| is set to
+     * |NanDataPathSecurityType.PASSPHRASE|.
+     * Min length: |IWifiNanIface.MIN_DATA_PATH_CONFIG_PASSPHRASE_LENGTH|
+     * Max length: |IWifiNanIface.MAX_DATA_PATH_CONFIG_PASSPHRASE_LENGTH|
+     * NAN Spec: Appendix: Mapping passphrase to PMK for NCS-SK Cipher Suites
+     */
+    byte[] passphrase;
+    /**
+     * Security Context Identifier attribute contains PMKID. Shall be included in NDP setup and
+     * response messages. Security Context Identifier identifies the Security Context. When
+     * security is enabled this field contains the 16 octet PMKID identifying the PMK used for
+     * setting up the Secure Data Path.
+     */
+    byte[16] scid;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDataPathSecurityType.aidl b/wifi/aidl/android/hardware/wifi/NanDataPathSecurityType.aidl
new file mode 100644
index 0000000..da23ffa
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDataPathSecurityType.aidl
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN DP (data-path) security configuration options.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanDataPathSecurityType {
+    OPEN,
+    PMK,
+    PASSPHRASE,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDebugConfig.aidl b/wifi/aidl/android/hardware/wifi/NanDebugConfig.aidl
new file mode 100644
index 0000000..d8fab0d
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDebugConfig.aidl
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Debug configuration parameters. Many of these allow non-standard-compliant operation and are
+ * not intended for normal operational mode.
+ */
+@VintfStability
+parcelable NanDebugConfig {
+    /**
+     * Specification of the lower 2 bytes of the cluster ID. The cluster ID is 50-60-9a-01-00-00 to
+     * 50-60-9a-01-FF-FF. Configuration is of the bottom and top values of the range (which default
+     * to 0x0000 and 0xFFFF respectively).
+     * Configuration is only used if |validClusterIdVals| is set to true.
+     */
+    boolean validClusterIdVals;
+    char clusterIdBottomRangeVal;
+    char clusterIdTopRangeVal;
+    /**
+     * NAN management interface address. If specified (|validIntfAddrVal| is true), then overrides
+     * any other configuration (specifically the default randomization configured by
+     * |NanConfigRequest.macAddressRandomizationIntervalSec|).
+     */
+    boolean validIntfAddrVal;
+    byte[6] intfAddrVal;
+    /**
+     * Combination of the 24 bit Organizationally Unique ID (OUI) and the 8 bit OUI type.
+     * Used if |validOuiVal| is set to true.
+     */
+    boolean validOuiVal;
+    int ouiVal;
+    /**
+     * Force the Random Factor to the specified value for all transmitted Sync/Discovery beacons.
+     * Used if |validRandomFactorForceVal| is set to true.
+     * NAN Spec: Master Indication Attribute / Random Factor
+     */
+    boolean validRandomFactorForceVal;
+    byte randomFactorForceVal;
+    /**
+     * Forces the hop-count for all transmitted Sync and Discovery Beacons NO matter the real
+     * hop-count being received over the air. Used if the |validHopCountForceVal| flag is set to
+     * true.
+     * NAN Spec: Cluster Attribute / Anchor Master Information / Hop Count to Anchor Master
+     */
+    boolean validHopCountForceVal;
+    byte hopCountForceVal;
+    /**
+     * Frequency in MHz to of the discovery channel in the specified band. Indexed by
+     * |NanBandIndex|. Used if the |validDiscoveryChannelVal| is set to true.
+     */
+    boolean validDiscoveryChannelVal;
+    int[3] discoveryChannelMhzVal;
+    /**
+     * Specifies whether sync/discovery beacons are transmitted in the specified band. Indexed by
+     * |NanBandIndex|. Used if the |validUseBeaconsInBandVal| is set to true.
+     */
+    boolean validUseBeaconsInBandVal;
+    boolean[3] useBeaconsInBandVal;
+    /**
+     * Specifies whether SDF (service discovery frames) are transmitted in the specified band.
+     * Indexed by |NanBandIndex|. Used if the |validUseSdfInBandVal| is set to true.
+     */
+    boolean validUseSdfInBandVal;
+    boolean[3] useSdfInBandVal;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanDiscoveryCommonConfig.aidl b/wifi/aidl/android/hardware/wifi/NanDiscoveryCommonConfig.aidl
new file mode 100644
index 0000000..ca1e016
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanDiscoveryCommonConfig.aidl
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanDataPathSecurityConfig;
+import android.hardware.wifi.NanMatchAlg;
+import android.hardware.wifi.NanRangingIndication;
+
+/**
+ * Configurations of NAN discovery sessions. Common to publish and subscribe discovery.
+ */
+@VintfStability
+parcelable NanDiscoveryCommonConfig {
+    /**
+     * The ID of the discovery session being configured. A value of 0 specifies a request to create
+     * a new discovery session. The new discovery session ID is returned with
+     * |IWifiNanIfaceEventCallback.notifyStartPublishResponse| or
+     * |IWifiNanIfaceEventCallback.notifyStartSubscribeResponse|.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Instance ID
+     */
+    byte sessionId;
+    /**
+     * The lifetime of the discovery session in seconds. A value of 0 means run forever or until
+     * canceled using |IWifiIface.stopPublishRequest| or |IWifiIface.stopSubscribeRequest|.
+     */
+    char ttlSec;
+    /**
+     * Indicates the interval between two Discovery Windows in which the device supporting the
+     * service is awake to transmit or receive the Service Discovery frames. Valid values of Awake
+     * DW Interval are: 1, 2, 4, 8 and 16. A value of 0 will default to 1. Does not override
+     * |NanBandSpecificConfig.discoveryWindowIntervalVal| configurations if those are specified.
+     */
+    char discoveryWindowPeriod;
+    /**
+     * The lifetime of the discovery session in number of transmitted SDF discovery packets. A value
+     * of 0 means forever or until canceled using |IWifiIface.stopPublishRequest| or
+     * |IWifiIface.stopSubscribeRequest|.
+     */
+    byte discoveryCount;
+    /**
+     * UTF-8 encoded string identifying the service.
+     * Max length: |NanCapabilities.maxServiceNameLen|.
+     * NAN Spec: The only acceptable single-byte UTF-8 symbols for a Service Name are alphanumeric
+     * values (A-Z, a-z, 0-9), the hyphen ('-'), and the period ('.'). All valid multi-byte UTF-8
+     * characters are acceptable in a Service Name.
+     */
+    byte[] serviceName;
+    /**
+     * Specifies how often to trigger |IWifiNanIfaceEventCallback.eventMatch| when continuously
+     * discovering the same discovery session (with no changes).
+     */
+    NanMatchAlg discoveryMatchIndicator;
+    /**
+     * Arbitrary information communicated in discovery packets - there is no semantic meaning to
+     * these bytes. They are passed-through from publisher to subscriber as-is with no parsing. Max
+     * length: |NanCapabilities.maxServiceSpecificInfoLen|. NAN Spec: Service Descriptor Attribute
+     * (SDA) / Service Info
+     */
+    byte[] serviceSpecificInfo;
+    /**
+     * Arbitrary information communicated in discovery packets - there is no semantic meaning to
+     * these bytes. They are passed-through from publisher to subscriber as-is with no parsing. Max
+     * length: |NanCapabilities.maxExtendedServiceSpecificInfoLen|. Spec: Service Descriptor
+     * Extension Attribute (SDEA) / Service Info
+     */
+    byte[] extendedServiceSpecificInfo;
+    /**
+     * Ordered sequence of <length, value> pairs (|length| uses 1 byte and contains the number of
+     * bytes in the |value| field) which specify further match criteria (beyond the service name).
+     * The match behavior is specified in details in the NAN spec.
+     * Publisher: used in SOLICITED or SOLICITED_UNSOLICITED sessions.
+     * Subscriber: used in ACTIVE or PASSIVE sessions.
+     * Max length: |NanCapabilities.maxMatchFilterLen|.
+     * NAN Spec: matching_filter_rx
+     */
+    byte[] rxMatchFilter;
+    /**
+     * Ordered sequence of <length, value> pairs (|length| uses 1 byte and contains the number of
+     * bytes in the |value| field) which specify further match criteria (beyond the service name).
+     * The match behavior is specified in details in the NAN spec.
+     * Publisher: used if provided.
+     * Subscriber: used (if provided) only in ACTIVE sessions.
+     * Max length: |NanCapabilities.maxMatchFilterLen|.
+     * NAN Spec: matching_filter_tx and Service Descriptor Attribute (SDA) / Matching Filter
+     */
+    byte[] txMatchFilter;
+    /**
+     * Specifies whether or not the discovery session uses the
+     * |NanBandSpecificConfig.rssiCloseProximity| value (configured in enable/configure requests) to
+     * filter out matched discovered peers.
+     * NAN Spec: Service Descriptor Attribute / Service Control / Discovery Range Limited.
+     */
+    boolean useRssiThreshold;
+    /**
+     * Controls whether or not the |IWifiNanIfaceEventCallback.eventPublishTerminated| (for publish
+     * discovery sessions) or |IWifiNanIfaceEventCallback.eventSubscribeTerminated| (for subscribe
+     * discovery sessions) will be delivered.
+     */
+    boolean disableDiscoveryTerminationIndication;
+    /**
+     * Controls whether or not |IWifiNanIfaceEventCallback.eventMatchExpired| will be delivered.
+     */
+    boolean disableMatchExpirationIndication;
+    /**
+     * Controls whether or not |IWifiNanIfaceEventCallback.eventFollowupReceived| will be delivered.
+     */
+    boolean disableFollowupReceivedIndication;
+    /**
+     * Security configuration of data-paths created in the context of this discovery session.
+     * Security parameters can be overridden during the actual construction of the data-path -
+     * allowing individual data-paths to have unique PMKs or passphrases.
+     */
+    NanDataPathSecurityConfig securityConfig;
+    /**
+     * Specifies whether or not there is a ranging requirement in this discovery session.
+     * Ranging is only performed if all other match criteria with the peer are met. Ranging must
+     * be performed if both peers in the discovery session (publisher and subscriber) set this
+     * flag to true. Otherwise, if either peer sets this flag to false, ranging must not be
+     * performed and must not impact discovery decisions. Note: Specifying that ranging is required
+     * also implies that this device must automatically accept ranging requests from peers. NAN
+     * Spec: Service Discovery Extension Attribute (SDEA) / Control / Ranging Require.
+     */
+    boolean rangingRequired;
+    /**
+     * Interval in ms between two ranging measurements. Only relevant if |rangingRequired| is true.
+     * If the Awake DW interval specified either in |discoveryWindowPeriod| or in
+     * |NanBandSpecificConfig.discoveryWindowIntervalVal| is larger than the ranging interval then
+     * priority is given to Awake DW interval.
+     */
+    int rangingIntervalMs;
+    /**
+     * The type of ranging feedback to be provided by discovery session matches
+     * |IWifiNanIfaceEventCallback.eventMatch|. Only relevant if |rangingRequired| is true.
+     */
+    NanRangingIndication configRangingIndications;
+    /**
+     * The ingress and egress distance in cm. If ranging is enabled (|rangingEnabled| is true) then
+     * |configRangingIndications| is used to determine whether ingress and/or egress (or neither)
+     * are used to determine whether a match has occurred.
+     * NAN Spec: Service Discovery Extension Attribute (SDEA) / Ingress & Egress Range Limit
+     */
+    char distanceIngressCm;
+    char distanceEgressCm;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanEnableRequest.aidl b/wifi/aidl/android/hardware/wifi/NanEnableRequest.aidl
new file mode 100644
index 0000000..8c28fe1
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanEnableRequest.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanConfigRequest;
+import android.hardware.wifi.NanDebugConfig;
+
+/**
+ * Enable requests for NAN. Start-up configuration for |IWifiNanIface.enableRequest|.
+ */
+@VintfStability
+parcelable NanEnableRequest {
+    /**
+     * Enable operation in a specific band. Indexed by |NanBandIndex|.
+     */
+    boolean[3] operateInBand;
+    /**
+     * Specify extent of cluster by specifying the max hop count.
+     */
+    byte hopCountMax;
+    /**
+     * Configurations of NAN cluster operation. Can also be modified at run-time using
+     * |IWifiNanIface.configRequest|.
+     */
+    NanConfigRequest configParams;
+    /**
+     * Non-standard configurations of NAN cluster operation. Useful for debugging operations.
+     */
+    NanDebugConfig debugConfigs;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanFollowupReceivedInd.aidl b/wifi/aidl/android/hardware/wifi/NanFollowupReceivedInd.aidl
new file mode 100644
index 0000000..20bc9b1
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanFollowupReceivedInd.aidl
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Follow up message received from peer indication structure.
+ */
+@VintfStability
+parcelable NanFollowupReceivedInd {
+    /**
+     * Discovery session (publish or subscribe) ID of a previously created discovery session. The
+     * message is received in the context of this discovery session.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Instance ID
+     */
+    byte discoverySessionId;
+    /**
+     * A unique ID of the peer. Can be subsequently used in |IWifiNanIface.transmitFollowupRequest|
+     * or to set up a data-path.
+     */
+    int peerId;
+    /**
+     * The NAN Discovery (management) MAC address of the peer.
+     */
+    byte[6] addr;
+    /**
+     * Indicates whether received in a further availability window (FAW) if true, or in a discovery
+     * window (DW) if false.
+     */
+    boolean receivedInFaw;
+    /**
+     * Received message from the peer. There is no semantic meaning to these bytes. They are
+     * passed-through from sender to receiver as-is with no parsing.
+     * Max length: |NanCapabilities.maxServiceSpecificInfoLen|.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Service Info
+     */
+    byte[] serviceSpecificInfo;
+    /**
+     * Arbitrary information communicated in discovery packets. There is no semantic meaning to
+     * these bytes. They are passed-through from publisher to subscriber as-is with no parsing. Max
+     * length: |NanCapabilities.maxExtendedServiceSpecificInfoLen|. Spec: Service Descriptor
+     * Extension Attribute (SDEA) / Service Info
+     */
+    byte[] extendedServiceSpecificInfo;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanInitiateDataPathRequest.aidl b/wifi/aidl/android/hardware/wifi/NanInitiateDataPathRequest.aidl
new file mode 100644
index 0000000..264a873
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanInitiateDataPathRequest.aidl
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanDataPathChannelCfg;
+import android.hardware.wifi.NanDataPathSecurityConfig;
+
+/**
+ *  Data Path Initiator requesting a data-path.
+ */
+@VintfStability
+parcelable NanInitiateDataPathRequest {
+    /**
+     * ID of the peer. Obtained as part of an earlier |IWifiNanIfaceEventCallback.eventMatch| or
+     * |IWifiNanIfaceEventCallback.eventFollowupReceived|.
+     */
+    int peerId;
+    /**
+     * NAN management interface MAC address of the peer. Obtained as part of an earlier
+     * |IWifiNanIfaceEventCallback.eventMatch| or
+     * |IWifiNanIfaceEventCallback.eventFollowupReceived|.
+     */
+    byte[6] peerDiscMacAddr;
+    /**
+     * Config flag for channel request.
+     */
+    NanDataPathChannelCfg channelRequestType;
+    /**
+     * Channel frequency in MHz to start data-path. Not relevant if |channelRequestType| is
+     * |NanDataPathChannelCfg.CHANNEL_NOT_REQUESTED|.
+     */
+    int channel;
+    /**
+     * NAN data interface name on which this data-path session is to be initiated.
+     * This must be an interface created using |IWifiNanIface.createDataInterfaceRequest|.
+     */
+    String ifaceName;
+    /**
+     * Security configuration of the requested data-path.
+     */
+    NanDataPathSecurityConfig securityConfig;
+    /**
+     * Arbitrary information communicated to the peer as part of the data-path setup process. There
+     * is no semantic meaning to these bytes. They are passed-through from sender to receiver as-is
+     * with no parsing.
+     * Max length: |NanCapabilities.maxAppInfoLen|.
+     * NAN Spec: Data Path Attributes / NDP Attribute / NDP Specific Info
+     */
+    byte[] appInfo;
+    /**
+     * A service name to be used with |passphrase| to construct a Pairwise Master Key (PMK) for the
+     * data-path. Only relevant when a data-path is requested which is not associated with a NAN
+     * discovery session - e.g. using out-of-band discovery.
+     * Constraints: same as |NanDiscoveryCommonConfig.serviceName|
+     * NAN Spec: Appendix: Mapping pass-phrase to PMK for NCS-SK Cipher Suites
+     */
+    byte[] serviceNameOutOfBand;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanMatchAlg.aidl b/wifi/aidl/android/hardware/wifi/NanMatchAlg.aidl
new file mode 100644
index 0000000..dc96a47
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanMatchAlg.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN Match indication type. Controls how often to trigger |IWifiNanIfaceEventCallback.eventMatch|
+ * for a single discovery session - i.e. continuously discovering the same publisher with no new
+ * data.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanMatchAlg {
+    MATCH_ONCE = 0,
+    MATCH_CONTINUOUS,
+    MATCH_NEVER,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanMatchInd.aidl b/wifi/aidl/android/hardware/wifi/NanMatchInd.aidl
new file mode 100644
index 0000000..896cde0
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanMatchInd.aidl
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanCipherSuiteType;
+import android.hardware.wifi.NanRangingIndication;
+
+/**
+ * Match indication structure.
+ */
+@VintfStability
+parcelable NanMatchInd {
+    /**
+     * Publish or subscribe discovery session ID of an existing discovery session.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Instance ID
+     */
+    byte discoverySessionId;
+    /**
+     * A unique ID of the peer. Can be subsequently used in |IWifiNanIface.transmitFollowupRequest|
+     * or to set up a data-path.
+     */
+    int peerId;
+    /**
+     * The NAN Discovery (management) MAC address of the peer.
+     */
+    byte[6] addr;
+    /**
+     * The arbitrary information contained in the |NanDiscoveryCommonConfig.serviceSpecificInfo| of
+     * the peer's discovery session configuration.
+     * Max length: |NanCapabilities.maxServiceSpecificInfoLen|.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Service Info
+     */
+    byte[] serviceSpecificInfo;
+    /**
+     * Arbitrary information communicated in discovery packets. There is no semantic meaning to
+     * these bytes. They are passed-through from publisher to subscriber as-is with no parsing. Max
+     * length: |NanCapabilities.maxExtendedServiceSpecificInfoLen|. Spec: Service Descriptor
+     * Extension Attribute (SDEA) / Service Info
+     */
+    byte[] extendedServiceSpecificInfo;
+    /**
+     * The match filter from the discovery packet (publish or subscribe) which caused service
+     * discovery. Matches the |NanDiscoveryCommonConfig.txMatchFilter| of the peer's Unsolicited
+     * publish message or of the local device's Active subscribe message.
+     * Max length: |NanCapabilities.maxMatchFilterLen|.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Matching Filter
+     */
+    byte[] matchFilter;
+    /**
+     * Indicates the type of discovery: true if match occurred on a Beacon frame, false if the match
+     * occurred on a Service Discovery Frame (SDF).
+     */
+    boolean matchOccurredInBeaconFlag;
+    /**
+     * Flag to indicate firmware is out of resources and that it can no longer track this Service
+     * Name. Indicates that while |IWifiNanIfaceEventCallback.eventMatch| will be received, the
+     * |NanDiscoveryCommonConfig.discoveryMatchIndicator| configuration will not be honored.
+     */
+    boolean outOfResourceFlag;
+    /**
+     * If RSSI filtering was enabled using |NanDiscoveryCommonConfig.useRssiThreshold| in discovery
+     * session setup, then this field contains the received RSSI value. It will contain 0 if RSSI
+     * filtering was not enabled.
+     * RSSI values are returned without sign, e.g. -70dBm will be returned as 70.
+     */
+    byte rssiValue;
+    /**
+     * Cipher type for data-paths constructed in the context of this discovery session. Valid if
+     * |peerRequiresSecurityEnabledInNdp| is true.
+     */
+    NanCipherSuiteType peerCipherType;
+    /**
+     * Indicates whether or not the peer requires security enabled in any data-path (NDP)
+     * constructed in the context of this discovery session. The |cipherType| specifies the cipher
+     * type for such data-paths. NAN Spec: Service Discovery Extension Attribute (SDEA) / Control /
+     * Security Required
+     */
+    boolean peerRequiresSecurityEnabledInNdp;
+    /**
+     * Indicates whether or not the peer requires (and hence allows) ranging in the context of this
+     * discovery session.
+     * Note that ranging is only performed if all other match criteria with the peer are met.
+     * NAN Spec: Service Discovery Extension Attribute (SDEA) / Control / Ranging Require.
+     */
+    boolean peerRequiresRanging;
+    /**
+     * Ranging indication supersedes the NanMatchAlg specification.
+     * Ex: If NanMatchAlg is MATCH_ONCE, but ranging indication is continuous, then continuous
+     * match notifications will be received (with ranging information).
+     * Ranging indication data is provided if Ranging required is enabled in the discovery
+     * specification and:
+     *   1) continuous ranging is specified.
+     *   2) ingress/egress is specified and:
+     *       - notify once for ingress >= ingress_distance and egress <= egress_distance,
+     *       - same for ingress_egress_both
+     * If the Awake DW intervals are larger than the ranging intervals, then priority is given
+     * to the device DW intervals.
+     *
+     * If ranging was required and executed, this contains the distance to the peer in mm. The
+     * |rangingIndicationType| field specifies the event which triggered ranging.
+     */
+    int rangingMeasurementInMm;
+    /**
+     * The ranging event(s) which triggered the ranging. e.g. can indicate that continuous ranging
+     * was requested, or else that an ingress event occurred.
+     */
+    NanRangingIndication rangingIndicationType;
+    /**
+     * Security Context Identifier attribute contains PMKID. Shall be included in NDP setup and
+     * response messages. Security Context Identifie identifies the Security Context. For NAN
+     * Shared Key Cipher Suite, this field contains the 16 octet PMKID identifying the PMK used for
+     * setting up the Secure Data Path.
+     */
+    byte[] scid;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanPublishRequest.aidl b/wifi/aidl/android/hardware/wifi/NanPublishRequest.aidl
new file mode 100644
index 0000000..6dd079c
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanPublishRequest.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanDiscoveryCommonConfig;
+import android.hardware.wifi.NanPublishType;
+import android.hardware.wifi.NanTxType;
+
+/**
+ * Publish request. Specifies a publish discovery operation.
+ */
+@VintfStability
+parcelable NanPublishRequest {
+    /**
+     * Common configuration of discovery sessions.
+     */
+    NanDiscoveryCommonConfig baseConfigs;
+    /**
+     * Type of the publish discovery session.
+     */
+    NanPublishType publishType;
+    /**
+     * For publishType of |NanPublishType.SOLICITED| or |NanPublishType.UNSOLICITED_SOLICITED|,
+     * this specifies the type of transmission used for responding to the probing subscribe
+     * discovery peer.
+     */
+    NanTxType txType;
+    /**
+     * Specifies whether data-path requests |IWifiNanIfaceEventCallback.eventDataPathRequest| (in
+     * the context of this discovery session) are automatically accepted (if true) - in which case
+     * the Responder must not call the |IWifiNanIface.respondToDataPathIndicationRequest| method and
+     * the device must automatically accept the data-path request and complete the negotiation.
+     */
+    boolean autoAcceptDataPathRequests;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanPublishType.aidl b/wifi/aidl/android/hardware/wifi/NanPublishType.aidl
new file mode 100644
index 0000000..a7a1c48
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanPublishType.aidl
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN publish discovery session types.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanPublishType {
+    UNSOLICITED = 0,
+    SOLICITED,
+    UNSOLICITED_SOLICITED,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanRangingIndication.aidl b/wifi/aidl/android/hardware/wifi/NanRangingIndication.aidl
new file mode 100644
index 0000000..731cbfc
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanRangingIndication.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Ranging in the context of discovery session indication controls. Controls
+ * the frequency of ranging-driven |IWifiNanIfaceEventCallback.eventMatch|.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanRangingIndication {
+    CONTINUOUS_INDICATION_MASK = 1 << 0,
+    INGRESS_MET_MASK = 1 << 1,
+    EGRESS_MET_MASK = 1 << 2,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanRespondToDataPathIndicationRequest.aidl b/wifi/aidl/android/hardware/wifi/NanRespondToDataPathIndicationRequest.aidl
new file mode 100644
index 0000000..6960e71
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanRespondToDataPathIndicationRequest.aidl
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanDataPathSecurityConfig;
+
+/**
+ * Response to a data-path request from a peer.
+ */
+@VintfStability
+parcelable NanRespondToDataPathIndicationRequest {
+    /**
+     * Accept (true) or reject (false) the request.
+     * NAN Spec: Data Path Attributes / NDP Attribute / Type and Status
+     */
+    boolean acceptRequest;
+    /**
+     * ID of the data-path (NDP) for which we're responding. Obtained as part of the request in
+     * |IWifiNanIfaceEventCallback.eventDataPathRequest|.
+     */
+    int ndpInstanceId;
+    /**
+     * NAN data interface name on which this data-path session is to be started.
+     * This must be an interface created using |IWifiNanIface.createDataInterfaceRequest|.
+     */
+    String ifaceName;
+    /**
+     * Security configuration of the requested data-path.
+     */
+    NanDataPathSecurityConfig securityConfig;
+    /**
+     * Arbitrary information communicated to the peer as part of the data-path setup process. There
+     * is no semantic meaning to these bytes. They are passed-through from sender to receiver as-is
+     * with no parsing.
+     * Max length: |NanCapabilities.maxAppInfoLen|.
+     * NAN Spec: Data Path Attributes / NDP Attribute / NDP Specific Info
+     */
+    byte[] appInfo;
+    /**
+     * A service name to be used with |passphrase| to construct a Pairwise Master Key (PMK) for the
+     * data-path. Only relevant when a data-path is requested which is not associated with a NAN
+     * discovery session - e.g. using out-of-band discovery.
+     * Constraints: same as |NanDiscoveryCommonConfig.serviceName|
+     * NAN Spec: Appendix: Mapping pass-phrase to PMK for NCS-SK Cipher Suites
+     */
+    byte[] serviceNameOutOfBand;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanSrfType.aidl b/wifi/aidl/android/hardware/wifi/NanSrfType.aidl
new file mode 100644
index 0000000..4063b17
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanSrfType.aidl
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN Service Response Filter Attribute Bit.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanSrfType {
+    BLOOM_FILTER = 0,
+    PARTIAL_MAC_ADDR,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanStatus.aidl b/wifi/aidl/android/hardware/wifi/NanStatus.aidl
new file mode 100644
index 0000000..ad29e5b
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanStatus.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.NanStatusCode;
+
+/**
+ * Status information returned in NAN notifications.
+ */
+@VintfStability
+parcelable NanStatus {
+    /**
+     * Status of the command request.
+     */
+    NanStatusCode status;
+    /**
+     * Further description of the issue causing a failure.
+     */
+    String description;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanStatusCode.aidl b/wifi/aidl/android/hardware/wifi/NanStatusCode.aidl
new file mode 100644
index 0000000..d63a50e
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanStatusCode.aidl
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN API response codes used in request notifications and events.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanStatusCode {
+    SUCCESS = 0,
+    /**
+     * NAN Discovery Engine/Host driver failures.
+     */
+    INTERNAL_FAILURE = 1,
+    /**
+     * NAN OTA failures.
+     */
+    PROTOCOL_FAILURE = 2,
+    /**
+     * The publish/subscribe discovery session id is invalid.
+     */
+    INVALID_SESSION_ID = 3,
+    /**
+     * Out of resources to fufill request.
+     */
+    NO_RESOURCES_AVAILABLE = 4,
+    /**
+     * Invalid arguments passed.
+     */
+    INVALID_ARGS = 5,
+    /**
+     * Invalid peer id.
+     */
+    INVALID_PEER_ID = 6,
+    /**
+     * Invalid NAN data-path (ndp) id.
+     */
+    INVALID_NDP_ID = 7,
+    /**
+     * Attempting to enable NAN when not available, e.g. wifi is disabled.
+     */
+    NAN_NOT_ALLOWED = 8,
+    /**
+     * Over the air ACK not received.
+     */
+    NO_OTA_ACK = 9,
+    /**
+     * Attempting to enable NAN when already enabled.
+     */
+    ALREADY_ENABLED = 10,
+    /**
+     * Can't queue tx followup message for transmission.
+     */
+    FOLLOWUP_TX_QUEUE_FULL = 11,
+    /**
+     * Unsupported concurrency of NAN and another feature - NAN disabled.
+     */
+    UNSUPPORTED_CONCURRENCY_NAN_DISABLED = 12,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanSubscribeRequest.aidl b/wifi/aidl/android/hardware/wifi/NanSubscribeRequest.aidl
new file mode 100644
index 0000000..12c1170
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanSubscribeRequest.aidl
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.MacAddress;
+import android.hardware.wifi.NanDiscoveryCommonConfig;
+import android.hardware.wifi.NanSrfType;
+import android.hardware.wifi.NanSubscribeType;
+
+/**
+ * Subscribe request. Specifies a subscribe discovery operation.
+ */
+@VintfStability
+parcelable NanSubscribeRequest {
+    /**
+     * Common configuration of discovery sessions.
+     */
+    NanDiscoveryCommonConfig baseConfigs;
+    /**
+     * The type of the subscribe discovery session.
+     */
+    NanSubscribeType subscribeType;
+    /**
+     * For |NanSubscribeType.ACTIVE| subscribe discovery sessions, specifies how the Service
+     * Response Filter (SRF) attribute is populated. Relevant only if |shouldUseSrf| is set to true.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Service Response Filter / SRF Control / SRF
+     * Type
+     */
+    NanSrfType srfType;
+    /**
+     * Configure whether inclusion of an address in |intfAddr| indicates that those devices should
+     * respond or the reverse. Relevant only if |shouldUseSrf| is set to true and |srfType| is set
+     * to |NanSrfType.PARTIAL_MAC_ADDR|. NAN Spec: Service Descriptor Attribute (SDA) / Service
+     * Response Filter / SRF Control / Include
+     */
+    boolean srfRespondIfInAddressSet;
+    /**
+     * Control whether the Service Response Filter (SRF) is used.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Service Control /
+     *           Service Response Filter Present
+     */
+    boolean shouldUseSrf;
+    /**
+     * Control whether the presence of |NanDiscoveryCommonConfig.serviceSpecificInfo| data is needed
+     * in the publisher in order to trigger service discovery, i.e. a
+     * |IWifiNanIfaceEventCallback.eventMatch|. The test is for presence of data - not for the
+     * specific contents of the data.
+     */
+    boolean isSsiRequiredForMatch;
+    /**
+     * NAN Interface Addresses constituting the Service Response Filter (SRF).
+     * Max length (number of addresses): |NanCapabilities.maxSubscribeInterfaceAddresses|.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Service Response Filter / Address Set
+     */
+    MacAddress[] intfAddr;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanSubscribeType.aidl b/wifi/aidl/android/hardware/wifi/NanSubscribeType.aidl
new file mode 100644
index 0000000..a5e8182
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanSubscribeType.aidl
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN subscribe discovery session types.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanSubscribeType {
+    PASSIVE = 0,
+    ACTIVE,
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanTransmitFollowupRequest.aidl b/wifi/aidl/android/hardware/wifi/NanTransmitFollowupRequest.aidl
new file mode 100644
index 0000000..c88b4ff
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanTransmitFollowupRequest.aidl
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Transmit follow up message request.
+ */
+@VintfStability
+parcelable NanTransmitFollowupRequest {
+    /**
+     * ID of an active publish or subscribe discovery session. Follow-up message is transmitted in
+     * the context of the discovery session. NAN Spec: Service Descriptor Attribute (SDA) / Instance
+     * ID
+     */
+    byte discoverySessionId;
+    /**
+     * ID of the peer. Obtained as part of an earlier |IWifiNanIfaceEventCallback.eventMatch| or
+     * |IWifiNanIfaceEventCallback.eventFollowupReceived|.
+     */
+    int peerId;
+    /**
+     * MAC address of the peer. Obtained as part of an earlier
+     * |IWifiNanIfaceEventCallback.eventMatch| or
+     * |IWifiNanIfaceEventCallback.eventFollowupReceived|.
+     */
+    byte[6] addr;
+    /**
+     * Whether the follow-up message should be transmitted with a high priority.
+     */
+    boolean isHighPriority;
+    /**
+     * Whether the follow-up message should be transmitted in a discovery window (true) or a further
+     * availability window (false).
+     */
+    boolean shouldUseDiscoveryWindow;
+    /**
+     * Arbitrary information communicated to the peer. There is no semantic meaning to these
+     * bytes. They are passed-through from sender to receiver as-is with no parsing.
+     * Max length: |NanCapabilities.maxServiceSpecificInfoLen|.
+     * NAN Spec: Service Descriptor Attribute (SDA) / Service Info
+     */
+    byte[] serviceSpecificInfo;
+    /**
+     * Arbitrary information communicated in discovery packets. There is no semantic meaning to
+     * these bytes. They are passed-through from publisher to subscriber as-is with no parsing. Max
+     * length: |NanCapabilities.maxExtendedServiceSpecificInfoLen|. Spec: Service Descriptor
+     * Extension Attribute (SDEA) / Service Info
+     */
+    byte[] extendedServiceSpecificInfo;
+    /**
+     * Disable |IWifiNanIfaceEventCallback.eventTransmitFollowup| - i.e. do not get indication on
+     * whether the follow-up was transmitted and received successfully.
+     */
+    boolean disableFollowupResultIndication;
+}
diff --git a/wifi/aidl/android/hardware/wifi/NanTxType.aidl b/wifi/aidl/android/hardware/wifi/NanTxType.aidl
new file mode 100644
index 0000000..904a7f4
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/NanTxType.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * NAN transmit type used in |NanPublishType.SOLICITED| or |NanPublishType.UNSOLICITED_SOLICITED|
+ * publish discovery sessions. Describes the addressing of the packet responding to an ACTIVE
+ * subscribe query.
+ */
+@VintfStability
+@Backing(type="int")
+enum NanTxType {
+    BROADCAST = 0,
+    UNICAST,
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttBw.aidl b/wifi/aidl/android/hardware/wifi/RttBw.aidl
new file mode 100644
index 0000000..9d42dc0
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttBw.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * RTT Measurement Bandwidth.
+ */
+@VintfStability
+@Backing(type="int")
+enum RttBw {
+    BW_5MHZ = 0x01,
+    BW_10MHZ = 0x02,
+    BW_20MHZ = 0x04,
+    BW_40MHZ = 0x08,
+    BW_80MHZ = 0x10,
+    BW_160MHZ = 0x20,
+    BW_320MHZ = 0x40,
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttCapabilities.aidl b/wifi/aidl/android/hardware/wifi/RttCapabilities.aidl
new file mode 100644
index 0000000..7c47ed5
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttCapabilities.aidl
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.RttBw;
+import android.hardware.wifi.RttPreamble;
+
+/**
+ * RTT Capabilities.
+ */
+@VintfStability
+parcelable RttCapabilities {
+    /**
+     * Whether 1-sided rtt data collection is supported.
+     */
+    boolean rttOneSidedSupported;
+    /**
+     * Whether ftm rtt data collection is supported.
+     */
+    boolean rttFtmSupported;
+    /**
+     * Whether initiator supports LCI request. Applies to 2-sided RTT.
+     */
+    boolean lciSupported;
+    /**
+     * Whether initiator supports LCR request. Applies to 2-sided RTT.
+     */
+    boolean lcrSupported;
+    /**
+     * Whether 11mc responder mode is supported.
+     */
+    boolean responderSupported;
+    /**
+     * Bit mask indicating what preamble is supported by initiator.
+     * Combination of |RttPreamble| values.
+     */
+    RttPreamble preambleSupport;
+    /**
+     * Bit mask indicating what BW is supported by initiator.
+     * Combination of |RttBw| values.
+     */
+    RttBw bwSupport;
+    /**
+     * Draft 11mc spec version supported by chip.
+     * For instance, version 4.0 must be 40 and version 4.3 must be 43 etc.
+     */
+    byte mcVersion;
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttConfig.aidl b/wifi/aidl/android/hardware/wifi/RttConfig.aidl
new file mode 100644
index 0000000..fc2c2e0
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttConfig.aidl
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.RttBw;
+import android.hardware.wifi.RttPeerType;
+import android.hardware.wifi.RttPreamble;
+import android.hardware.wifi.RttType;
+import android.hardware.wifi.WifiChannelInfo;
+
+/**
+ * RTT configuration.
+ */
+@VintfStability
+parcelable RttConfig {
+    /**
+     * Peer device mac address.
+     */
+    byte[6] addr;
+    /**
+     * 1-sided or 2-sided RTT.
+     */
+    RttType type;
+    /**
+     * Optional peer device hint (STA, P2P, AP).
+     */
+    RttPeerType peer;
+    /**
+     * Required for STA-AP mode, optional for P2P, NBD etc.
+     */
+    WifiChannelInfo channel;
+    /**
+     * Time interval between bursts (units: 100 ms).
+     * Applies to 1-sided and 2-sided RTT multi-burst requests.
+     * Range: 0-31, 0: no preference by initiator (2-sided RTT).
+     */
+    int burstPeriod;
+    /**
+     * Total number of RTT bursts to be executed. Will be
+     * specified in the same way as the parameter "Number of
+     * Burst Exponent" found in the FTM frame format. This
+     * applies to both 1-sided RTT and 2-sided RTT. Valid
+     * values are 0 to 15 as defined in 802.11mc std.
+     * 0 means single shot.
+     * The implication of this parameter on the maximum
+     * number of RTT results is the following:
+     * for 1-sided RTT: max num of RTT results = (2^num_burst)*(num_frames_per_burst)
+     * for 2-sided RTT: max num of RTT results = (2^num_burst)*(num_frames_per_burst - 1)
+     */
+    int numBurst;
+    /**
+     * Number of frames per burst.
+     * Minimum value = 1, Maximum value = 31
+     * For 2-sided, this equals the number of FTM frames
+     * to be attempted in a single burst. This also
+     * equals the number of FTM frames that the
+     * initiator will request that the responder sends
+     * in a single frame.
+     */
+    int numFramesPerBurst;
+    /**
+     * Number of retries for a failed RTT frame.
+     * Applies to 1-sided RTT only. Minimum value = 0, Maximum value = 3
+     */
+    int numRetriesPerRttFrame;
+    /**
+     * The following fields are only valid for 2-side RTT.
+     *
+     *
+     * Maximum number of retries that the initiator can
+     * retry an FTMR frame.
+     * Minimum value = 0, Maximum value = 3
+     */
+    int numRetriesPerFtmr;
+    /**
+     * Whether to request location civic info or not.
+     */
+    boolean mustRequestLci;
+    /**
+     * Whether to request location civic records or not.
+     */
+    boolean mustRequestLcr;
+    /**
+     * Applies to 1-sided and 2-sided RTT. Valid values will
+     * be 2-11 and 15 as specified by the 802.11mc std for
+     * the FTM parameter burst duration. In a multi-burst
+     * request, if responder overrides with larger value,
+     * the initiator will return failure. In a single-burst
+     * request, if responder overrides with larger value,
+     * the initiator will send TMR_STOP to terminate RTT
+     * at the end of the burst_duration it requested.
+     */
+    int burstDuration;
+    /**
+     * RTT preamble to be used in the RTT frames.
+     */
+    RttPreamble preamble;
+    /**
+     * RTT BW to be used in the RTT frames.
+     */
+    RttBw bw;
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttLciInformation.aidl b/wifi/aidl/android/hardware/wifi/RttLciInformation.aidl
new file mode 100644
index 0000000..5a49de5
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttLciInformation.aidl
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.RttMotionPattern;
+
+/**
+ * Movement pattern unknown.
+ */
+@VintfStability
+parcelable RttLciInformation {
+    /**
+     * Latitude in degrees * 2^25 , 2's complement.
+     */
+    long latitude;
+    /**
+     * Longitude in degrees * 2^25 , 2's complement.
+     */
+    long longitude;
+    /**
+     * Altitude in units of 1/256 m.
+     */
+    int altitude;
+    /**
+     * As defined in Section 2.3.2 of IETF RFC 6225.
+     */
+    byte latitudeUnc;
+    /**
+     * As defined in Section 2.3.2 of IETF RFC 6225.
+     */
+    byte longitudeUnc;
+    /**
+     * As defined in Section 2.4.5 from IETF RFC 6225.
+     */
+    byte altitudeUnc;
+    /**
+     * The following elements are for configuring the Z subelement.
+     *
+     *
+     * Motion pattern type.
+     */
+    RttMotionPattern motionPattern;
+    /**
+     * Floor in units of 1/16th of floor. 0x80000000 if unknown.
+     */
+    int floor;
+    /**
+     * In units of 1/64 m.
+     */
+    int heightAboveFloor;
+    /**
+     * In units of 1/64 m. 0 if unknown.
+     */
+    int heightUnc;
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttLcrInformation.aidl b/wifi/aidl/android/hardware/wifi/RttLcrInformation.aidl
new file mode 100644
index 0000000..b3bb13a
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttLcrInformation.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+@VintfStability
+parcelable RttLcrInformation {
+    /**
+     * Country code symbol.
+     */
+    byte[2] countryCode;
+    /**
+     * Civic info to be copied in FTM frame.
+     */
+    String civicInfo;
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttMotionPattern.aidl b/wifi/aidl/android/hardware/wifi/RttMotionPattern.aidl
new file mode 100644
index 0000000..00517ac
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttMotionPattern.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+@VintfStability
+@Backing(type="int")
+enum RttMotionPattern {
+    /**
+     * Not expected to change location.
+     */
+    NOT_EXPECTED = 0,
+    /**
+     * Expected to change location.
+     */
+    EXPECTED = 1,
+    /**
+     * Movement pattern unknown.
+     */
+    UNKNOWN = 2,
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttPeerType.aidl b/wifi/aidl/android/hardware/wifi/RttPeerType.aidl
new file mode 100644
index 0000000..148a8cc
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttPeerType.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * RTT peer types.
+ */
+@VintfStability
+@Backing(type="int")
+enum RttPeerType {
+    AP = 1,
+    STA = 2,
+    P2P_GO = 3,
+    P2P_CLIENT = 4,
+    NAN_TYPE = 5,
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttPreamble.aidl b/wifi/aidl/android/hardware/wifi/RttPreamble.aidl
new file mode 100644
index 0000000..e460a94
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttPreamble.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * RTT Measurement Preamble.
+ */
+@VintfStability
+@Backing(type="int")
+enum RttPreamble {
+    LEGACY = 0x1,
+    HT = 0x2,
+    VHT = 0x4,
+    /**
+     * Preamble type for 11ax
+     */
+    HE = 0x8,
+    /**
+     * Preamble type for 11be
+     */
+    EHT = 0x10,
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttResponder.aidl b/wifi/aidl/android/hardware/wifi/RttResponder.aidl
new file mode 100644
index 0000000..a16f274
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttResponder.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.RttPreamble;
+import android.hardware.wifi.WifiChannelInfo;
+
+/**
+ * RTT Responder information.
+ */
+@VintfStability
+parcelable RttResponder {
+    WifiChannelInfo channel;
+    RttPreamble preamble;
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttResult.aidl b/wifi/aidl/android/hardware/wifi/RttResult.aidl
new file mode 100644
index 0000000..565cce7
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttResult.aidl
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.RttStatus;
+import android.hardware.wifi.RttType;
+import android.hardware.wifi.WifiInformationElement;
+import android.hardware.wifi.WifiRateInfo;
+
+/**
+ * RTT results.
+ */
+@VintfStability
+parcelable RttResult {
+    /**
+     * Peer device mac address.
+     */
+    byte[6] addr;
+    /**
+     * Burst number in a multi-burst request.
+     */
+    int burstNum;
+    /**
+     * Total RTT measurement frames attempted.
+     */
+    int measurementNumber;
+    /**
+     * Total successful RTT measurement frames.
+     */
+    int successNumber;
+    /**
+     * Maximum number of "FTM frames per burst" supported by
+     * the responder STA. Applies to 2-sided RTT only.
+     * If reponder overrides with larger value:
+     * - for single-burst request, initiator will truncate the
+     * larger value and send a TMR_STOP after receiving as
+     * many frames as originally requested.
+     * - for multi-burst request, initiator will return
+     * failure right away.
+     */
+    byte numberPerBurstPeer;
+    /**
+     * Ranging status.
+     */
+    RttStatus status;
+    /**
+     * If status is RTT_STATUS_FAIL_BUSY_TRY_LATER,
+     * this will be the time provided by the responder as to
+     * when the request can be tried again. Applies to 2-sided
+     * RTT only. In sec, 1-31 sec.
+     */
+    byte retryAfterDuration;
+    /**
+     * RTT type.
+     */
+    RttType type;
+    /**
+     * Average rssi in 0.5 dB steps (e.g. 143 implies -71.5 dB).
+     */
+    int rssi;
+    /**
+     * Rssi spread in 0.5 dB steps (e.g. 5 implies 2.5 dB spread) - optional.
+     */
+    int rssiSpread;
+    /**
+     * 1-sided RTT: TX rate of RTT frame.
+     * 2-sided RTT: TX rate of initiator's Ack in response to FTM frame.
+     */
+    WifiRateInfo txRate;
+    /**
+     * 1-sided RTT: TX rate of Ack from other side.
+     * 2-sided RTT: TX rate of FTM frame coming from responder.
+     */
+    WifiRateInfo rxRate;
+    /**
+     * Round trip time in picoseconds.
+     */
+    long rtt;
+    /**
+     * Rtt standard deviation in picoseconds.
+     */
+    long rttSd;
+    /**
+     * Difference between max and min rtt times recorded in picoseconds.
+     */
+    long rttSpread;
+    /**
+     * Distance in mm (optional).
+     */
+    int distanceInMm;
+    /**
+     * Standard deviation in mm (optional).
+     */
+    int distanceSdInMm;
+    /**
+     * Difference between max and min distance recorded in mm (optional).
+     */
+    int distanceSpreadInMm;
+    /**
+     * Time of the measurement (in microseconds since boot).
+     */
+    long timeStampInUs;
+    /**
+     * Actual time taken by the FW to finish one burst
+     * measurement (in ms). Applies to 1-sided and 2-sided RTT.
+     */
+    int burstDurationInMs;
+    /**
+     * Number of bursts allowed by the responder. Applies
+     * to 2-sided RTT only.
+     */
+    int negotiatedBurstNum;
+    /**
+     * For 11mc only.
+     */
+    WifiInformationElement lci;
+    /**
+     * For 11mc only.
+     */
+    WifiInformationElement lcr;
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttStatus.aidl b/wifi/aidl/android/hardware/wifi/RttStatus.aidl
new file mode 100644
index 0000000..600165c
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttStatus.aidl
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Ranging status.
+ */
+@VintfStability
+@Backing(type="int")
+enum RttStatus {
+    SUCCESS = 0,
+    /**
+     * General failure status.
+     */
+    FAILURE = 1,
+    /**
+     * Target STA does not respond to request.
+     */
+    FAIL_NO_RSP = 2,
+    /**
+     * Request rejected. Applies to 2-sided RTT only.
+     */
+    FAIL_REJECTED = 3,
+    FAIL_NOT_SCHEDULED_YET = 4,
+    /**
+     * Timing measurement times out.
+     */
+    FAIL_TM_TIMEOUT = 5,
+    /**
+     * Target on different channel, cannot range.
+     */
+    FAIL_AP_ON_DIFF_CHANNEL = 6,
+    /**
+     * Ranging not supported.
+     */
+    FAIL_NO_CAPABILITY = 7,
+    /**
+     * Request aborted for an unknown reason.
+     */
+    ABORTED = 8,
+    /**
+     * Invalid T1-T4 timestamp.
+     */
+    FAIL_INVALID_TS = 9,
+    /**
+     * 11mc protocol failed.
+     */
+    FAIL_PROTOCOL = 10,
+    /**
+     * Request could not be scheduled.
+     */
+    FAIL_SCHEDULE = 11,
+    /**
+     * Responder cannot collaborate at time of request.
+     */
+    FAIL_BUSY_TRY_LATER = 12,
+    /**
+     * Bad request args.
+     */
+    INVALID_REQ = 13,
+    /**
+     * WiFi not enabled.
+     */
+    NO_WIFI = 14,
+    /**
+     * Responder overrides param info, cannot range with new params.
+     */
+    FAIL_FTM_PARAM_OVERRIDE = 15,
+    /**
+     * NAN ranging negotiation failure.
+     */
+    NAN_RANGING_PROTOCOL_FAILURE = 16,
+    /**
+     * NAN concurrency not supported (NDP + RTT).
+     */
+    NAN_RANGING_CONCURRENCY_NOT_SUPPORTED = 17,
+}
diff --git a/wifi/aidl/android/hardware/wifi/RttType.aidl b/wifi/aidl/android/hardware/wifi/RttType.aidl
new file mode 100644
index 0000000..e95a928
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/RttType.aidl
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * RTT Types.
+ */
+@VintfStability
+@Backing(type="int")
+enum RttType {
+    ONE_SIDED = 1,
+    TWO_SIDED = 2,
+}
diff --git a/wifi/aidl/android/hardware/wifi/Ssid.aidl b/wifi/aidl/android/hardware/wifi/Ssid.aidl
new file mode 100644
index 0000000..fd985a3
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/Ssid.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Byte array representing an Ssid. Use when we need to
+ * pass an array of Ssid's to a method, as variable-sized
+ * 2D arrays are not supported in AIDL.
+ *
+ * TODO (b/210705533): Replace this type with a 2D byte array.
+ */
+@VintfStability
+parcelable Ssid {
+    byte[32] data;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaApfPacketFilterCapabilities.aidl b/wifi/aidl/android/hardware/wifi/StaApfPacketFilterCapabilities.aidl
new file mode 100644
index 0000000..5063b49
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaApfPacketFilterCapabilities.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Parameters to specify the APF capabilities of this iface.
+ */
+@VintfStability
+parcelable StaApfPacketFilterCapabilities {
+    /**
+     * Version of the packet filter interpreter supported.
+     */
+    int version;
+    /**
+     * Maximum size of the filter bytecode in bytes for an iface.
+     */
+    int maxLength;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaBackgroundScanBucketEventReportSchemeMask.aidl b/wifi/aidl/android/hardware/wifi/StaBackgroundScanBucketEventReportSchemeMask.aidl
new file mode 100644
index 0000000..92e2928
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaBackgroundScanBucketEventReportSchemeMask.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Mask of event reporting schemes that can be specified in background scan
+ * requests.
+ */
+@VintfStability
+@Backing(type="int")
+enum StaBackgroundScanBucketEventReportSchemeMask {
+    /**
+     * Report a scan completion event after scan. If this is not set, then scan
+     * completion events must be reported if report_threshold_percent or
+     * report_threshold_num_scans is reached.
+     */
+    EACH_SCAN = 1 << 0,
+    /**
+     * Forward scan results (beacons/probe responses + IEs) in real time to HAL,
+     * in addition to completion events.
+     * Note: To keep backward compatibility, fire completion events regardless
+     * of REPORT_EVENTS_EACH_SCAN.
+     */
+    FULL_RESULTS = 1 << 1,
+    /**
+     * Controls if scans for this bucket must be placed in the results buffer.
+     */
+    NO_BATCH = 1 << 2,
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaBackgroundScanBucketParameters.aidl b/wifi/aidl/android/hardware/wifi/StaBackgroundScanBucketParameters.aidl
new file mode 100644
index 0000000..7bd87b2
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaBackgroundScanBucketParameters.aidl
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.StaBackgroundScanBucketEventReportSchemeMask;
+import android.hardware.wifi.WifiBand;
+
+/**
+ * Background Scan parameters per bucket that can be specified in background
+ * scan requests.
+ */
+@VintfStability
+parcelable StaBackgroundScanBucketParameters {
+    /**
+     * Bucket index. This index is used to report results in
+     * |StaScanData.bucketsScanned|.
+     */
+    int bucketIdx;
+    /**
+     * Bands to scan or |BAND_UNSPECIFIED| if frequencies list must be used
+     * instead.
+     */
+    WifiBand band;
+    /**
+     * Channel frequencies (in Mhz) to scan if |band| is set to
+     * |BAND_UNSPECIFIED|.
+     * Max length: |StaBackgroundScanLimits.MAX_CHANNELS|.
+     */
+    int[] frequencies;
+    /**
+     * Period at which this bucket must be scanned (in milliseconds). Must be an integer
+     * multiple of the |basePeriodInMs| specified in the BackgroundScanParameters.
+     */
+    int periodInMs;
+    /**
+     * Bitset of |StaBackgroundScanBucketEventReportSchemeMask| values controlling
+     * when events for this bucket must be reported.
+     */
+    StaBackgroundScanBucketEventReportSchemeMask eventReportScheme;
+    /**
+     * For exponential back off. If |exponentialMaxPeriodInMs| is non-zero or
+     * different than period, then this bucket is an exponential backoff bucket
+     * and the scan period must grow exponentially as per formula:
+     *   actual_period(N) = period * (base ^ (N/step_count))
+     * to this maximum period (in milliseconds).
+     */
+    int exponentialMaxPeriodInMs;
+    /**
+     * For exponential back off. Multiplier: new_period=old_period * base
+     */
+    int exponentialBase;
+    /**
+     * For exponential back off. Number of scans to perform for a given
+     * period.
+     */
+    int exponentialStepCount;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaBackgroundScanCapabilities.aidl b/wifi/aidl/android/hardware/wifi/StaBackgroundScanCapabilities.aidl
new file mode 100644
index 0000000..8dd9141
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaBackgroundScanCapabilities.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Parameters to specify the Background Scan capabilities of this iface.
+ */
+@VintfStability
+parcelable StaBackgroundScanCapabilities {
+    /**
+     * Maximum number of bytes available for cached scan results.
+     */
+    int maxCacheSize;
+    /**
+     * Maximum number of buckets that can be supplied for a scan.
+     */
+    int maxBuckets;
+    /**
+     * Maximum number of APs that must be stored for each scan.
+     */
+    int maxApCachePerScan;
+    /**
+     * Max reporting number of scans threshold that can be specified in the scan
+     * parameters.
+     */
+    int maxReportingThreshold;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaBackgroundScanLimits.aidl b/wifi/aidl/android/hardware/wifi/StaBackgroundScanLimits.aidl
new file mode 100644
index 0000000..b6fc44c
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaBackgroundScanLimits.aidl
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Max limits for background scan.
+ */
+@VintfStability
+@Backing(type="int")
+enum StaBackgroundScanLimits {
+    MAX_CHANNELS = 16,
+    MAX_BUCKETS = 16,
+    MAX_AP_CACHE_PER_SCAN = 32,
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaBackgroundScanParameters.aidl b/wifi/aidl/android/hardware/wifi/StaBackgroundScanParameters.aidl
new file mode 100644
index 0000000..0b56069
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaBackgroundScanParameters.aidl
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.StaBackgroundScanBucketParameters;
+
+/**
+ * Background Scan parameters that can be specified in background scan
+ * requests.
+ */
+@VintfStability
+parcelable StaBackgroundScanParameters {
+    /**
+     * GCD of all bucket periods (in milliseconds).
+     */
+    int basePeriodInMs;
+    /**
+     * Maximum number of APs that must be stored for each scan. If the maximum
+     * is reached, then the highest RSSI results must be returned.
+     * Max length: |StaBackgroundScanLimits.MAX_AP_CACHE_PER_SCAN|.
+     */
+    int maxApPerScan;
+    /**
+     * % cache buffer filled threshold at which the host must be notified of
+     * batched scan results.
+     */
+    int reportThresholdPercent;
+    /**
+     * Threshold at which the AP must be woken up, in number of scans.
+     */
+    int reportThresholdNumScans;
+    /**
+     * List of buckets to be scheduled.
+     * Max length: |StaBackgroundScanLimits.MAX_BUCKETS|.
+     */
+    StaBackgroundScanBucketParameters[] buckets;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaLinkLayerIfaceContentionTimeStats.aidl b/wifi/aidl/android/hardware/wifi/StaLinkLayerIfaceContentionTimeStats.aidl
new file mode 100644
index 0000000..51f6916
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaLinkLayerIfaceContentionTimeStats.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Contention time statistics for different traffic categories.
+ */
+@VintfStability
+parcelable StaLinkLayerIfaceContentionTimeStats {
+    /**
+     * Data packet min contention time (usec). This includes both the internal contention time
+     * among different access categories within the chipset and the contention time for the medium.
+     */
+    int contentionTimeMinInUsec;
+    /**
+     * Data packet max contention time (usec). This includes both the internal contention time
+     * among different access categories within the chipset and the contention time for the medium.
+     */
+    int contentionTimeMaxInUsec;
+    /**
+     * Data packet average contention time (usec). This includes both the internal contention time
+     * among different access categories within the chipset and the contention time for the medium.
+     */
+    int contentionTimeAvgInUsec;
+    /**
+     * Number of data packets used for contention statistics.
+     */
+    int contentionNumSamples;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaLinkLayerIfacePacketStats.aidl b/wifi/aidl/android/hardware/wifi/StaLinkLayerIfacePacketStats.aidl
new file mode 100644
index 0000000..c0e2c7b
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaLinkLayerIfacePacketStats.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Packet stats for different traffic categories.
+ */
+@VintfStability
+parcelable StaLinkLayerIfacePacketStats {
+    /**
+     * Number of received unicast data packets.
+     */
+    long rxMpdu;
+    /**
+     * Number of successfully transmitted unicast data pkts (ACK rcvd).
+     */
+    long txMpdu;
+    /**
+     * Number of transmitted unicast data pkt losses (no ACK).
+     */
+    long lostMpdu;
+    /**
+     * Number of transmitted unicast data retry pkts.
+     */
+    long retries;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaLinkLayerIfaceStats.aidl b/wifi/aidl/android/hardware/wifi/StaLinkLayerIfaceStats.aidl
new file mode 100644
index 0000000..78f8caa
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaLinkLayerIfaceStats.aidl
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.StaLinkLayerIfaceContentionTimeStats;
+import android.hardware.wifi.StaLinkLayerIfacePacketStats;
+import android.hardware.wifi.StaPeerInfo;
+
+/**
+ * Iface statistics for the current connection.
+ */
+@VintfStability
+parcelable StaLinkLayerIfaceStats {
+    /**
+     * Number beacons received from the connected AP.
+     */
+    int beaconRx;
+    /**
+     * Access Point Beacon and Management frames RSSI (averaged).
+     */
+    int avgRssiMgmt;
+    /**
+     * WME Best Effort Access Category packet counters.
+     */
+    StaLinkLayerIfacePacketStats wmeBePktStats;
+    /**
+     * WME Background Access Category packet counters.
+     */
+    StaLinkLayerIfacePacketStats wmeBkPktStats;
+    /**
+     * WME Video Access Category packet counters.
+     */
+    StaLinkLayerIfacePacketStats wmeViPktStats;
+    /**
+     * WME Voice Access Category packet counters.
+     */
+    StaLinkLayerIfacePacketStats wmeVoPktStats;
+    /**
+     * Duty cycle for the iface.
+     * If this iface is being served using time slicing on a radio with one or more ifaces
+     * (i.e MCC), then the duty cycle assigned to this iface in %.
+     * If not using time slicing (i.e SCC or DBS), set to 100.
+     */
+    byte timeSliceDutyCycleInPercent;
+    /**
+     * WME Best Effort (BE) Access Category (AC) contention time statistics.
+     */
+    StaLinkLayerIfaceContentionTimeStats wmeBeContentionTimeStats;
+    /**
+     * WME Background (BK) Access Category (AC) contention time statistics.
+     */
+    StaLinkLayerIfaceContentionTimeStats wmeBkContentionTimeStats;
+    /**
+     * WME Video (VI) Access Category (AC) contention time statistics.
+     */
+    StaLinkLayerIfaceContentionTimeStats wmeViContentionTimeStats;
+    /**
+     * WME Voice (VO) Access Category (AC) contention time statistics.
+     */
+    StaLinkLayerIfaceContentionTimeStats wmeVoContentionTimeStats;
+    /**
+     * Per peer statistics.
+     */
+    StaPeerInfo[] peers;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaLinkLayerRadioStats.aidl b/wifi/aidl/android/hardware/wifi/StaLinkLayerRadioStats.aidl
new file mode 100644
index 0000000..6105172
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaLinkLayerRadioStats.aidl
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiChannelStats;
+
+@VintfStability
+parcelable StaLinkLayerRadioStats {
+    /**
+     * Time for which the radio is awake.
+     */
+    int onTimeInMs;
+    /**
+     * Total time for which the radio is in active transmission.
+     */
+    int txTimeInMs;
+    /**
+     * Time for which the radio is in active tranmission per tx level.
+     */
+    int[] txTimeInMsPerLevel;
+    /**
+     * Time for which the radio is in active receive.
+     */
+    int rxTimeInMs;
+    /**
+     *  Total time for which the radio is awake due to scan.
+     */
+    int onTimeInMsForScan;
+    /**
+     * Total time for which the radio is awake due to NAN scan since boot or crash.
+     */
+    int onTimeInMsForNanScan;
+    /**
+     * Total time for which the radio is awake due to background scan since boot or crash.
+     */
+    int onTimeInMsForBgScan;
+    /**
+     * Total time for which the radio is awake due to roam scan since boot or crash.
+     */
+    int onTimeInMsForRoamScan;
+    /**
+     * Total time for which the radio is awake due to PNO scan since boot or crash.
+     */
+    int onTimeInMsForPnoScan;
+    /**
+     * Total time for which the radio is awake due to Hotspot 2.0 scans and GAS exchange since boot
+     * or crash.
+     */
+    int onTimeInMsForHs20Scan;
+    /**
+     * List of channel stats associated with this radio.
+     */
+    WifiChannelStats[] channelStats;
+    /**
+     * Radio ID: An implementation specific value identifying the radio interface for which the
+     * stats are produced. Framework must not interpret this value. It must use this value for
+     * persistently identifying the statistics between calls,
+     * e.g. if the HAL provides them in different order.
+     */
+    int radioId;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaLinkLayerStats.aidl b/wifi/aidl/android/hardware/wifi/StaLinkLayerStats.aidl
new file mode 100644
index 0000000..32be121
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaLinkLayerStats.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.StaLinkLayerIfaceStats;
+import android.hardware.wifi.StaLinkLayerRadioStats;
+
+/**
+ * Link layer stats retrieved via |IWifiStaIface.getLinkLayerStats|.
+ */
+@VintfStability
+parcelable StaLinkLayerStats {
+    StaLinkLayerIfaceStats iface;
+    StaLinkLayerRadioStats[] radios;
+    /**
+     * Timestamp for each stats sample. This is the absolute milliseconds
+     * from boot when these stats were sampled.
+     */
+    long timeStampInMs;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaPeerInfo.aidl b/wifi/aidl/android/hardware/wifi/StaPeerInfo.aidl
new file mode 100644
index 0000000..2032802
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaPeerInfo.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.StaRateStat;
+
+/**
+ * Per peer statistics. Types of peers include the Access Point (AP), Tunneled Direct Link
+ * Setup (TDLS), Group Owner (GO), Neighbor Awareness Networking (NAN), etc.
+ */
+@VintfStability
+parcelable StaPeerInfo {
+    /**
+     * Station count: The total number of stations currently associated with the peer.
+     */
+    char staCount;
+    /**
+     * Channel utilization: The percentage of time (normalized to 255, i.e., x% corresponds to
+     * (int) x * 255 / 100) that the medium is sensed as busy measured by either physical or
+     * virtual carrier sense (CS) mechanism.
+     */
+    char chanUtil;
+    /**
+     * Per rate statistics.
+     */
+    StaRateStat[] rateStats;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaRateStat.aidl b/wifi/aidl/android/hardware/wifi/StaRateStat.aidl
new file mode 100644
index 0000000..8326884
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaRateStat.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiRateInfo;
+
+/**
+ * Per rate statistics. The rate is characterized by the combination of preamble, number
+ * of spatial streams, transmission bandwidth, and modulation and coding scheme (MCS).
+ */
+@VintfStability
+parcelable StaRateStat {
+    /**
+     * Wifi rate information: preamble, number of spatial streams, bandwidth, MCS, etc.
+     */
+    WifiRateInfo rateInfo;
+    /**
+     * Number of successfully transmitted data packets (ACK received).
+     */
+    int txMpdu;
+    /**
+     * Number of received data packets.
+     */
+    int rxMpdu;
+    /**
+     * Number of data packet losses (no ACK).
+     */
+    int mpduLost;
+    /**
+     * Number of data packet retries.
+     */
+    int retries;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaRoamingCapabilities.aidl b/wifi/aidl/android/hardware/wifi/StaRoamingCapabilities.aidl
new file mode 100644
index 0000000..7642612
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaRoamingCapabilities.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Structure describing the roaming control capabilities supported.
+ */
+@VintfStability
+parcelable StaRoamingCapabilities {
+    /**
+     * Maximum number of BSSIDs that may be blocklisted.
+     */
+    int maxBlocklistSize;
+    /**
+     * Maximum number of SSIDs that may be allowlisted.
+     */
+    int maxAllowlistSize;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaRoamingConfig.aidl b/wifi/aidl/android/hardware/wifi/StaRoamingConfig.aidl
new file mode 100644
index 0000000..c59c531
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaRoamingConfig.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.MacAddress;
+import android.hardware.wifi.Ssid;
+
+/**
+ * Structure describing the roaming control configuration.
+ */
+@VintfStability
+parcelable StaRoamingConfig {
+    /**
+     * List of BSSIDs that are blocklisted for roaming.
+     */
+    MacAddress[] bssidBlocklist;
+    /**
+     * List of SSIDs that are allowlisted for roaming.
+     */
+    Ssid[] ssidAllowlist;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaRoamingState.aidl b/wifi/aidl/android/hardware/wifi/StaRoamingState.aidl
new file mode 100644
index 0000000..d75d323
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaRoamingState.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Enum describing the various states to set the roaming
+ * control to.
+ */
+@VintfStability
+@Backing(type="byte")
+enum StaRoamingState {
+    /**
+     * Driver/Firmware must not perform any roaming.
+     */
+    DISABLED = 0,
+    /**
+     * Driver/Firmware is allowed to perform roaming while respecting
+     * the |StaRoamingConfig| parameters set using |configureRoaming|.
+     */
+    ENABLED = 1,
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaScanData.aidl b/wifi/aidl/android/hardware/wifi/StaScanData.aidl
new file mode 100644
index 0000000..9d6bd53
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaScanData.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.StaScanDataFlagMask;
+import android.hardware.wifi.StaScanResult;
+
+/**
+ * Structure describing all of the access points seen during
+ * the scan.
+ */
+@VintfStability
+parcelable StaScanData {
+    /**
+     * Bitset containing |ScanDataFlagMask| values.
+     */
+    StaScanDataFlagMask flags;
+    /**
+     * Bitset where each bit indicates if the bucket with that index (starting at
+     * 0) was scanned.
+     */
+    int bucketsScanned;
+    /**
+     * List of scan results.
+     */
+    StaScanResult[] results;
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaScanDataFlagMask.aidl b/wifi/aidl/android/hardware/wifi/StaScanDataFlagMask.aidl
new file mode 100644
index 0000000..ea87df5
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaScanDataFlagMask.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Mask of flags set in the |ScanData| instance.
+ */
+@VintfStability
+@Backing(type="int")
+enum StaScanDataFlagMask {
+    /**
+     * Indicates that a scan was interrupted/did not occur, so results may be
+     * incomplete.
+     */
+    INTERRUPTED = 1 << 0,
+}
diff --git a/wifi/aidl/android/hardware/wifi/StaScanResult.aidl b/wifi/aidl/android/hardware/wifi/StaScanResult.aidl
new file mode 100644
index 0000000..9f6f415
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/StaScanResult.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiInformationElement;
+
+/**
+ * Structure describing all the information about a single access point seen
+ * during the scan.
+ */
+@VintfStability
+parcelable StaScanResult {
+    long timeStampInUs;
+    byte[] ssid;
+    byte[6] bssid;
+    int rssi;
+    int frequency;
+    char beaconPeriodInMs;
+    char capability;
+    WifiInformationElement[] informationElements;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiAntennaMode.aidl b/wifi/aidl/android/hardware/wifi/WifiAntennaMode.aidl
new file mode 100644
index 0000000..e21dd87
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiAntennaMode.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Antenna configuration.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiAntennaMode {
+    WIFI_ANTENNA_MODE_UNSPECIFIED = 0,
+    WIFI_ANTENNA_MODE_1X1 = 1,
+    WIFI_ANTENNA_MODE_2X2 = 2,
+    WIFI_ANTENNA_MODE_3X3 = 3,
+    WIFI_ANTENNA_MODE_4X4 = 4,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiBand.aidl b/wifi/aidl/android/hardware/wifi/WifiBand.aidl
new file mode 100644
index 0000000..cfdf944
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiBand.aidl
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Wifi bands defined in the 80211 spec.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiBand {
+    BAND_UNSPECIFIED = 0,
+    /**
+     * 2.4 GHz.
+     */
+    BAND_24GHZ = 1,
+    /**
+     * 5 GHz without DFS.
+     */
+    BAND_5GHZ = 2,
+    /**
+     * 5 GHz DFS only.
+     */
+    BAND_5GHZ_DFS = 4,
+    /**
+     * 5 GHz with DFS.
+     */
+    BAND_5GHZ_WITH_DFS = 6,
+    /**
+     * 2.4 GHz + 5 GHz; no DFS.
+     */
+    BAND_24GHZ_5GHZ = 3,
+    /**
+     * 2.4 GHz + 5 GHz with DFS.
+     */
+    BAND_24GHZ_5GHZ_WITH_DFS = 7,
+    /**
+     * 6 GHz.
+     */
+    BAND_6GHZ = 8,
+    /**
+     * 5 GHz no DFS + 6 GHz.
+     */
+    BAND_5GHZ_6GHZ = 10,
+    /**
+     * 2.4 GHz + 5 GHz no DFS + 6 GHz.
+     */
+    BAND_24GHZ_5GHZ_6GHZ = 11,
+    /**
+     * 2.4 GHz + 5 GHz with DFS + 6 GHz.
+     */
+    BAND_24GHZ_5GHZ_WITH_DFS_6GHZ = 15,
+    /**
+     * 60 GHz.
+     */
+    BAND_60GHZ = 16,
+    /**
+     * 2.4 GHz + 5 GHz no DFS + 6 GHz + 60 GHz.
+     */
+    BAND_24GHZ_5GHZ_6GHZ_60GHZ = 27,
+    /**
+     * 2.4 GHz + 5 GHz with DFS + 6 GHz + 60 GHz.
+     */
+    BAND_24GHZ_5GHZ_WITH_DFS_6GHZ_60GHZ = 31,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiChannelInfo.aidl b/wifi/aidl/android/hardware/wifi/WifiChannelInfo.aidl
new file mode 100644
index 0000000..8fee7eb
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiChannelInfo.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiChannelWidthInMhz;
+
+/**
+ * Channel information.
+ */
+@VintfStability
+parcelable WifiChannelInfo {
+    /**
+     * Channel width (20, 40, 80, 80+80, 160, 320).
+     */
+    WifiChannelWidthInMhz width;
+    /**
+     * Primary 20 MHz channel.
+     */
+    int centerFreq;
+    /**
+     * Center frequency (MHz) first segment.
+     */
+    int centerFreq0;
+    /**
+     * Center frequency (MHz) second segment.
+     */
+    int centerFreq1;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiChannelStats.aidl b/wifi/aidl/android/hardware/wifi/WifiChannelStats.aidl
new file mode 100644
index 0000000..f77821b
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiChannelStats.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiChannelInfo;
+
+@VintfStability
+parcelable WifiChannelStats {
+    /**
+     * Channel information.
+     */
+    WifiChannelInfo channel;
+    /**
+     * Total time for which the radio is awake on this channel.
+     */
+    int onTimeInMs;
+    /**
+     * Total time for which CCA is held busy on this channel.
+     */
+    int ccaBusyTimeInMs;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiChannelWidthInMhz.aidl b/wifi/aidl/android/hardware/wifi/WifiChannelWidthInMhz.aidl
new file mode 100644
index 0000000..e456530
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiChannelWidthInMhz.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Channel operating width in Mhz.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiChannelWidthInMhz {
+    WIDTH_INVALID = -1,
+    WIDTH_20 = 0,
+    WIDTH_40 = 1,
+    WIDTH_80 = 2,
+    WIDTH_160 = 3,
+    WIDTH_80P80 = 4,
+    WIDTH_5 = 5,
+    WIDTH_10 = 6,
+    /**
+     * 320 MHz
+     */
+    WIDTH_320 = 7,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxIcmpPacketDetails.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxIcmpPacketDetails.aidl
new file mode 100644
index 0000000..8cf4819
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxIcmpPacketDetails.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Struct capturing the count of all rx ICMP packets that caused
+ * host wakeup.
+ */
+@VintfStability
+parcelable WifiDebugHostWakeReasonRxIcmpPacketDetails {
+    /**
+     * Wake icmp packet count.
+     */
+    int icmpPkt;
+    /**
+     * Wake icmp6 packet count.
+     */
+    int icmp6Pkt;
+    /**
+     * Wake icmp6 RA packet count.
+     */
+    int icmp6Ra;
+    /**
+     * Wake icmp6 NA packet count.
+     */
+    int icmp6Na;
+    /**
+     * Wake icmp6 NS packet count.
+     */
+    int icmp6Ns;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxMulticastPacketDetails.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxMulticastPacketDetails.aidl
new file mode 100644
index 0000000..51faf66
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxMulticastPacketDetails.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Struct capturing the count of all rx multicast packets that caused
+ * host wakeup.
+ */
+@VintfStability
+parcelable WifiDebugHostWakeReasonRxMulticastPacketDetails {
+    /**
+     * Rx wake packet was ipv4 multicast.
+     */
+    int ipv4RxMulticastAddrCnt;
+    /**
+     * Rx wake packet was ipv6 multicast.
+     */
+    int ipv6RxMulticastAddrCnt;
+    /**
+     * Rx wake packet was non-ipv4 and non-ipv6.
+     */
+    int otherRxMulticastAddrCnt;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxPacketDetails.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxPacketDetails.aidl
new file mode 100644
index 0000000..b5c6a5e
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonRxPacketDetails.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Struct capturing the count of all rx packets that caused
+ * host wakeup.
+ */
+@VintfStability
+parcelable WifiDebugHostWakeReasonRxPacketDetails {
+    /**
+     * Total rx unicast packet which woke up host.
+     */
+    int rxUnicastCnt;
+    /**
+     * Total rx multicast packet which woke up host.
+     */
+    int rxMulticastCnt;
+    /**
+     * Total rx broadcast packet which woke up host.
+     */
+    int rxBroadcastCnt;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonStats.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonStats.aidl
new file mode 100644
index 0000000..82d5d3e
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugHostWakeReasonStats.aidl
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiDebugHostWakeReasonRxIcmpPacketDetails;
+import android.hardware.wifi.WifiDebugHostWakeReasonRxMulticastPacketDetails;
+import android.hardware.wifi.WifiDebugHostWakeReasonRxPacketDetails;
+
+/**
+ * Structure capturing the count of all the wireless related host wakeup.
+ * This is used to capture all the reasons why the host processor
+ * (WLAN driver) was woken up by the WLAN firmware.
+ * These stats may be used to debug any power issues caused due to frequent
+ * wakeup of the host processor by the WLAN firmware.
+ */
+@VintfStability
+parcelable WifiDebugHostWakeReasonStats {
+    /**
+     * Total count of cmd/event wakes.
+     * These must account for all wakeups due to WLAN management
+     * commands/events received over the air.
+     */
+    int totalCmdEventWakeCnt;
+    /**
+     * Vector of wake counts per cmd/event type.
+     * The number of command types and their meaning is only understood by the
+     * vendor.
+     */
+    int[] cmdEventWakeCntPerType;
+    /**
+     * Total count of driver/firmware wakes.
+     * These must account for all wakeups due to local driver/firmware
+     * interactions. These include all vendor implementation specific
+     * interactions like any heart-beat monitoring, bus management, etc.
+     */
+    int totalDriverFwLocalWakeCnt;
+    /**
+     * Vector of wake counts per driver/firmware interaction type.
+     * The number of command types and their meaning is only understood by the
+     * vendor.
+     */
+    int[] driverFwLocalWakeCntPerType;
+    /**
+     * Total data rx packets that woke up host.
+     */
+    int totalRxPacketWakeCnt;
+    WifiDebugHostWakeReasonRxPacketDetails rxPktWakeDetails;
+    WifiDebugHostWakeReasonRxMulticastPacketDetails rxMulticastPkWakeDetails;
+    WifiDebugHostWakeReasonRxIcmpPacketDetails rxIcmpPkWakeDetails;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugPacketFateFrameInfo.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugPacketFateFrameInfo.aidl
new file mode 100644
index 0000000..7601bf2
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugPacketFateFrameInfo.aidl
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiDebugPacketFateFrameType;
+
+/**
+ * Information regarding the frame transmitted/received.
+ */
+@VintfStability
+parcelable WifiDebugPacketFateFrameInfo {
+    /**
+     * The type of MAC-layer frame that this frame_info holds.
+     * - For data frames, use FRAME_TYPE_ETHERNET_II.
+     * - For management frames, use FRAME_TYPE_80211_MGMT.
+     * - If the type of the frame is unknown, use FRAME_TYPE_UNKNOWN.
+     */
+    WifiDebugPacketFateFrameType frameType;
+    /**
+     * The number of bytes included in |frameContent|.
+     * If the frame contents are missing (e.g. RX frame dropped in firmware),
+     * |frameLen| must be set to 0.
+     */
+    long frameLen;
+    /**
+     * Host clock when this frame was received by the driver (either outbound
+     * from the host network stack, or inbound from the firmware).
+     * - The timestamp must be taken from a clock which includes time the host
+     *   spent suspended (e.g. ktime_get_boottime()).
+     * - If no host timestamp is available (e.g. RX frame was dropped in firmware),
+     *   this field must be set to 0.
+     */
+    long driverTimestampUsec;
+    /**
+     * Firmware clock when this frame was received by the firmware
+     * (either outbound from the host, or inbound from a remote  station).
+     * - The timestamp must be taken from a clock which includes time firmware
+     *   spent suspended (if applicable).
+     * - If no firmware timestamp is available (e.g. TX frame was dropped by the
+     *   driver), then this field must be set to 0.
+     * - Consumers of |frameInfo| must not assume any synchronization between
+     *   the driver and firmware clocks.
+     */
+    long firmwareTimestampUsec;
+    /**
+     * Actual frame content. This is the raw bytes of the corresponding packet.
+     * - Should be provided for TX frames originated by the host.
+     * - Should be provided for RX frames received by the driver.
+     * - Optionally provided for TX frames originated by firmware.
+     *   (At discretion of HAL implementation.)
+     * - Optionally provided for RX frames dropped in firmware.
+     *   (At discretion of HAL implementation.)
+     * - If frame content is not provided, |frameLen| must be set to 0.
+     */
+    byte[] frameContent;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugPacketFateFrameType.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugPacketFateFrameType.aidl
new file mode 100644
index 0000000..5c0d171
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugPacketFateFrameType.aidl
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Type of frame transmitted/received.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiDebugPacketFateFrameType {
+    UNKNOWN,
+    ETHERNET_II,
+    MGMT_80211,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferFlags.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferFlags.aidl
new file mode 100644
index 0000000..0d1806e
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferFlags.aidl
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Flags describing each debug ring buffer.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiDebugRingBufferFlags {
+    HAS_BINARY_ENTRIES = 1 << 0,
+    HAS_ASCII_ENTRIES = 1 << 1,
+    HAS_PER_PACKET_ENTRIES = 1 << 2,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferStatus.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferStatus.aidl
new file mode 100644
index 0000000..2b0faa2
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferStatus.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Struct describing each debug ring buffer supported by
+ * the device.
+ */
+@VintfStability
+parcelable WifiDebugRingBufferStatus {
+    /**
+     * Name of this debug ring buffer.
+     */
+    String ringName;
+    /**
+     * Combination of |WifiDebugRingBufferFlags| values.
+     */
+    int flags;
+    /**
+     * Unique integer representing the ring.
+     */
+    int ringId;
+    /**
+     * Total memory size allocated for the buffer.
+     */
+    int sizeInBytes;
+    /**
+     * Amount of free space in the buffer.
+     */
+    int freeSizeInBytes;
+    /**
+     * Verbose level for ring buffer.
+     */
+    int verboseLevel;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferVerboseLevel.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferVerboseLevel.aidl
new file mode 100644
index 0000000..30778eb
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugRingBufferVerboseLevel.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Verbose logging level to set for each debug ring buffer supported
+ * by the device.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiDebugRingBufferVerboseLevel {
+    /**
+     * Level 0 corresponds to no collection, and it makes log handler
+     * stop by no more events from driver.
+     */
+    NONE = 0,
+    /**
+     * Level 1 corresponds to normal log level, with minimal user impact.
+     * This is the default value.
+     */
+    DEFAULT = 1,
+    /**
+     * Level 2 is enabled when user is lazily trying to reproduce a problem.
+     * Wifi performance and power can be impacted, but device should not
+     * otherwise be significantly impacted.
+     */
+    VERBOSE = 2,
+    /**
+     * Level 3 is used when trying to actively debug a problem.
+     * This will cause severe performance degradation.
+     */
+    EXCESSIVE = 3,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugRxPacketFate.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugRxPacketFate.aidl
new file mode 100644
index 0000000..2983f81
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugRxPacketFate.aidl
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Enum describing the fate of the RX packets.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiDebugRxPacketFate {
+    /**
+     * Valid and delivered to network stack (e.g., netif_rx()).
+     */
+    SUCCESS,
+    /**
+     * Queued within firmware, but not yet sent to driver.
+     */
+    FW_QUEUED,
+    /**
+     * Dropped by firmware due to host-programmable filters.
+     */
+    FW_DROP_FILTER,
+    /**
+     * Dropped by firmware as invalid (e.g. bad checksum, decrypt failed,
+     * or invalid for current state).
+     */
+    FW_DROP_INVALID,
+    /**
+     * Dropped by firmware due to lack of buffer space.
+     */
+    FW_DROP_NOBUFS,
+    /**
+     * Dropped by firmware for any other reason.
+     */
+    FW_DROP_OTHER,
+    /**
+     * Queued within driver, not yet delivered to network stack.
+     */
+    DRV_QUEUED,
+    /**
+     * Dropped by driver due to filter rules.
+     */
+    DRV_DROP_FILTER,
+    /**
+     * Dropped by driver as invalid (e.g. not permitted in current state).
+     */
+    DRV_DROP_INVALID,
+    /**
+     * Dropped by driver due to lack of buffer space.
+     */
+    DRV_DROP_NOBUFS,
+    /**
+     * Dropped by driver for any other reason.
+     */
+    DRV_DROP_OTHER,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugRxPacketFateReport.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugRxPacketFateReport.aidl
new file mode 100644
index 0000000..f4d709c
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugRxPacketFateReport.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiDebugPacketFateFrameInfo;
+import android.hardware.wifi.WifiDebugRxPacketFate;
+
+/**
+ * Struct describing packet fate report for each Rx frame.
+ */
+@VintfStability
+parcelable WifiDebugRxPacketFateReport {
+    WifiDebugRxPacketFate fate;
+    WifiDebugPacketFateFrameInfo frameInfo;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugTxPacketFate.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugTxPacketFate.aidl
new file mode 100644
index 0000000..717d62a
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugTxPacketFate.aidl
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Enum describing the fate of the TX packets.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiDebugTxPacketFate {
+    /**
+     * Sent over air and ACKed.
+     */
+    ACKED,
+    /**
+     * Sent over air but not ACKed (normal for broadcast/multicast).
+     */
+    SENT,
+    /**
+     * Queued within firmware, but not yet sent over air.
+     */
+    FW_QUEUED,
+    /**
+     * Dropped by firmware as invalid (e.g. bad source address, bad checksum,
+     * or invalid for current state).
+     */
+    FW_DROP_INVALID,
+    /**
+     * Dropped by firmware due to lack of buffer space.
+     */
+    FW_DROP_NOBUFS,
+    /**
+     * Dropped by firmware for any other reason. Includes frames that were sent
+     * by driver to the firmware, but unaccounted for by firmware.
+     */
+    FW_DROP_OTHER,
+    /**
+     * Queued within driver, not yet sent to firmware.
+     */
+    DRV_QUEUED,
+    /**
+     * Dropped by driver as invalid (e.g. bad source address, or invalid for
+     * current state).
+     */
+    DRV_DROP_INVALID,
+    /**
+     * Dropped by driver due to lack of buffer space.
+     */
+    DRV_DROP_NOBUFS,
+    /**
+     * Dropped by driver for any other reason.
+     */
+    DRV_DROP_OTHER,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiDebugTxPacketFateReport.aidl b/wifi/aidl/android/hardware/wifi/WifiDebugTxPacketFateReport.aidl
new file mode 100644
index 0000000..b59b0a5
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiDebugTxPacketFateReport.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiDebugPacketFateFrameInfo;
+import android.hardware.wifi.WifiDebugTxPacketFate;
+
+/**
+ * Struct describing packet fate report for each Tx frame.
+ */
+@VintfStability
+parcelable WifiDebugTxPacketFateReport {
+    WifiDebugTxPacketFate fate;
+    WifiDebugPacketFateFrameInfo frameInfo;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiIfaceMode.aidl b/wifi/aidl/android/hardware/wifi/WifiIfaceMode.aidl
new file mode 100644
index 0000000..f70c744
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiIfaceMode.aidl
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Interface operating modes.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiIfaceMode {
+    /**
+     * Interface operation mode is client.
+     */
+    IFACE_MODE_STA = 1 << 0,
+    /**
+     * Interface operation mode is Hotspot.
+     */
+    IFACE_MODE_SOFTAP = 1 << 1,
+    /**
+     * Interface operation mode is Ad-Hoc network.
+     */
+    IFACE_MODE_IBSS = 1 << 2,
+    /**
+     * Interface operation mode is Wifi Direct Client.
+     */
+    IFACE_MODE_P2P_CLIENT = 1 << 3,
+    /**
+     * Interface operation mode is Wifi Direct Group Owner.
+     */
+    IFACE_MODE_P2P_GO = 1 << 4,
+    /**
+     * Interface operation mode is Aware.
+     */
+    IFACE_MODE_NAN = 1 << 5,
+    /**
+     * Interface operation mode is Mesh network.
+     */
+    IFACE_MODE_MESH = 1 << 6,
+    /**
+     * Interface operation mode is Tunneled Direct Link Setup.
+     */
+    IFACE_MODE_TDLS = 1 << 7,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiInformationElement.aidl b/wifi/aidl/android/hardware/wifi/WifiInformationElement.aidl
new file mode 100644
index 0000000..f5f6de9
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiInformationElement.aidl
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Information elements contained within the |ScanResult| structure.
+ * These elements correspond to the IEEE_802.11 standard.
+ */
+@VintfStability
+parcelable WifiInformationElement {
+    byte id;
+    byte[] data;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiRadioCombination.aidl b/wifi/aidl/android/hardware/wifi/WifiRadioCombination.aidl
new file mode 100644
index 0000000..28b15ed
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiRadioCombination.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiRadioConfiguration;
+
+/**
+ * Wifi radio combination.
+ */
+@VintfStability
+parcelable WifiRadioCombination {
+    /**
+     * List of radio configurations in this combination.
+     */
+    WifiRadioConfiguration[] radioConfigurations;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiRadioCombinationMatrix.aidl b/wifi/aidl/android/hardware/wifi/WifiRadioCombinationMatrix.aidl
new file mode 100644
index 0000000..b79a818
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiRadioCombinationMatrix.aidl
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiRadioCombination;
+
+/**
+ * Wifi radio combinations matrix retrieved via
+ * |IWifiChip.getSupportedRadioCombinationsMatrix|.
+ */
+@VintfStability
+parcelable WifiRadioCombinationMatrix {
+    /**
+     * List of all the possible radio combinations that the chip can operate.
+     */
+    WifiRadioCombination[] radioCombinations;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiRadioConfiguration.aidl b/wifi/aidl/android/hardware/wifi/WifiRadioConfiguration.aidl
new file mode 100644
index 0000000..ae8eff3
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiRadioConfiguration.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiAntennaMode;
+import android.hardware.wifi.WifiBand;
+
+/**
+ * Wifi radio configuration.
+ */
+@VintfStability
+parcelable WifiRadioConfiguration {
+    /**
+     * Band on which this radio chain is operating.
+     * Valid values of bandInfo are: BAND_24GHZ, BAND_5GHZ, BAND_6GHZ and
+     * BAND_60GHZ.
+     *
+     */
+    WifiBand bandInfo;
+    /**
+     * Wifi Antenna configuration.
+     */
+    WifiAntennaMode antennaMode;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiRateInfo.aidl b/wifi/aidl/android/hardware/wifi/WifiRateInfo.aidl
new file mode 100644
index 0000000..c4e285e
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiRateInfo.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiChannelWidthInMhz;
+import android.hardware.wifi.WifiRateNss;
+import android.hardware.wifi.WifiRatePreamble;
+
+/**
+ * Wifi rate info.
+ */
+@VintfStability
+parcelable WifiRateInfo {
+    /**
+     * Preamble used for RTT measurements.
+     */
+    WifiRatePreamble preamble;
+    /**
+     * Number of spatial streams.
+     */
+    WifiRateNss nss;
+    /**
+     * Bandwidth of channel.
+     */
+    WifiChannelWidthInMhz bw;
+    /**
+     * OFDM/CCK rate code as per IEEE std in units of 0.5mbps.
+     * HT/VHT/HE/EHT would be mcs index.
+     */
+    byte rateMcsIdx;
+    /**
+     * Bitrate in units of 100 Kbps.
+     */
+    int bitRateInKbps;
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiRateNss.aidl b/wifi/aidl/android/hardware/wifi/WifiRateNss.aidl
new file mode 100644
index 0000000..0c263a5
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiRateNss.aidl
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Number of spatial streams in VHT/HT.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiRateNss {
+    NSS_1x1 = 0,
+    NSS_2x2 = 1,
+    NSS_3x3 = 2,
+    NSS_4x4 = 3,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiRatePreamble.aidl b/wifi/aidl/android/hardware/wifi/WifiRatePreamble.aidl
new file mode 100644
index 0000000..116e46a
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiRatePreamble.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Wifi Rate Preamble.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiRatePreamble {
+    OFDM = 0,
+    CCK = 1,
+    HT = 2,
+    VHT = 3,
+    RESERVED = 4,
+    /**
+     * Preamble type for 11ax.
+     */
+    HE = 5,
+    /**
+     * Preamble type for 11be.
+     */
+    EHT = 6,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiStatusCode.aidl b/wifi/aidl/android/hardware/wifi/WifiStatusCode.aidl
new file mode 100644
index 0000000..30817f3
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiStatusCode.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+/**
+ * Enum values indicating the status of the WiFi operation.
+ */
+@VintfStability
+@Backing(type="int")
+enum WifiStatusCode {
+    /**
+     * No errors.
+     */
+    SUCCESS,
+    /**
+     * Method invoked on an invalid |IWifiChip| object.
+     */
+    ERROR_WIFI_CHIP_INVALID,
+    /**
+     * Method invoked on an invalid |IWifiIface| object.
+     */
+    ERROR_WIFI_IFACE_INVALID,
+    /**
+     * Method invoked on an invalid |IWifiRttController| object.
+     */
+    ERROR_WIFI_RTT_CONTROLLER_INVALID,
+    ERROR_NOT_SUPPORTED,
+    ERROR_NOT_AVAILABLE,
+    ERROR_NOT_STARTED,
+    ERROR_INVALID_ARGS,
+    ERROR_BUSY,
+    ERROR_UNKNOWN,
+}
diff --git a/wifi/aidl/android/hardware/wifi/WifiUsableChannel.aidl b/wifi/aidl/android/hardware/wifi/WifiUsableChannel.aidl
new file mode 100644
index 0000000..d92e4cc
--- /dev/null
+++ b/wifi/aidl/android/hardware/wifi/WifiUsableChannel.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi;
+
+import android.hardware.wifi.WifiChannelWidthInMhz;
+import android.hardware.wifi.WifiIfaceMode;
+
+/**
+ * Wifi usable channel information.
+ */
+@VintfStability
+parcelable WifiUsableChannel {
+    /**
+     * Wifi channel freqeuncy in MHz.
+     */
+    int channel;
+    /**
+     * Wifi channel bandwidth in MHz.
+     */
+    WifiChannelWidthInMhz channelBandwidth;
+    /**
+     * Iface modes feasible on this channel.
+     */
+    WifiIfaceMode ifaceModeMask;
+}
diff --git a/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp b/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp
index 2fade4d..5c59819 100644
--- a/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp
+++ b/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp
@@ -122,7 +122,8 @@
 
     IHostapd::IfaceParams getIfaceParamsWithAcs(std::string iface_name) {
         // First get the settings for WithoutAcs and then make changes
-        IHostapd::IfaceParams iface_params_1_2 = getIfaceParamsWithoutAcs(iface_name);
+        IHostapd::IfaceParams iface_params_1_2 =
+            getIfaceParamsWithoutAcs(iface_name);
         iface_params_1_2.V1_1.V1_0.channelParams.enableAcs = true;
         iface_params_1_2.V1_1.V1_0.channelParams.acsShouldExcludeDfs = true;
         iface_params_1_2.V1_1.V1_0.channelParams.channel = 0;
@@ -132,8 +133,10 @@
         return iface_params_1_2;
     }
 
-    IHostapd::IfaceParams getIfaceParamsWithAcsAndFreqRange(std::string iface_name) {
-        IHostapd::IfaceParams iface_params_1_2 = getIfaceParamsWithAcs(iface_name);
+    IHostapd::IfaceParams getIfaceParamsWithAcsAndFreqRange(
+        std::string iface_name) {
+        IHostapd::IfaceParams iface_params_1_2 =
+            getIfaceParamsWithAcs(iface_name);
         ::android::hardware::wifi::hostapd::V1_2::IHostapd::AcsFrequencyRange
             acsFrequencyRange;
         acsFrequencyRange.start = 2412;
@@ -147,8 +150,10 @@
         return iface_params_1_2;
     }
 
-    IHostapd::IfaceParams getIfaceParamsWithAcsAndInvalidFreqRange(std::string iface_name) {
-        IHostapd::IfaceParams iface_params_1_2 = getIfaceParamsWithAcsAndFreqRange(iface_name);
+    IHostapd::IfaceParams getIfaceParamsWithAcsAndInvalidFreqRange(
+        std::string iface_name) {
+        IHostapd::IfaceParams iface_params_1_2 =
+            getIfaceParamsWithAcsAndFreqRange(iface_name);
         iface_params_1_2.channelParams.acsChannelFreqRangesMhz[0].start = 222;
         iface_params_1_2.channelParams.acsChannelFreqRangesMhz[0].end = 999;
         return iface_params_1_2;
@@ -210,8 +215,10 @@
         return nw_params_1_2;
     }
 
-    IHostapd::IfaceParams getIfaceParamsWithInvalidChannel(std::string iface_name) {
-        IHostapd::IfaceParams iface_params_1_2 = getIfaceParamsWithoutAcs(iface_name);
+    IHostapd::IfaceParams getIfaceParamsWithInvalidChannel(
+        std::string iface_name) {
+        IHostapd::IfaceParams iface_params_1_2 =
+            getIfaceParamsWithoutAcs(iface_name);
         iface_params_1_2.V1_1.V1_0.channelParams.channel = kIfaceInvalidChannel;
         return iface_params_1_2;
     }
@@ -237,8 +244,8 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithAcs(ifname),
-                              getPskNwParams());
+    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                              getIfaceParamsWithAcs(ifname), getPskNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -252,7 +259,8 @@
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
     auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
-                              getIfaceParamsWithAcsAndFreqRange(ifname), getPskNwParams());
+                              getIfaceParamsWithAcsAndFreqRange(ifname),
+                              getPskNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -266,7 +274,8 @@
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
     auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
-                              getIfaceParamsWithAcsAndInvalidFreqRange(ifname), getPskNwParams());
+                              getIfaceParamsWithAcsAndInvalidFreqRange(ifname),
+                              getPskNwParams());
     EXPECT_NE(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -279,8 +288,8 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithAcs(ifname),
-                              getOpenNwParams());
+    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                              getIfaceParamsWithAcs(ifname), getOpenNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -292,8 +301,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
-                              getPskNwParams());
+    auto status =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithoutAcs(ifname), getPskNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -305,8 +315,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
-                              getOpenNwParams());
+    auto status =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithoutAcs(ifname), getOpenNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -319,7 +330,8 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
+    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                              getIfaceParamsWithoutAcs(ifname),
                               getSaeTransitionNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status.code);
 }
@@ -333,8 +345,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
-                              getSaeNwParams());
+    auto status =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithoutAcs(ifname), getSaeNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -347,8 +360,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status_1_2 = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithAcs(ifname),
-                                  getPskNwParams());
+    auto status_1_2 =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithAcs(ifname),
+                    getPskNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status_1_2.code);
     auto status = HIDL_INVOKE(hostapd_, removeAccessPoint, ifname);
     EXPECT_EQ(
@@ -364,8 +378,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status_1_2 = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
-                                  getPskNwParams());
+    auto status_1_2 =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithoutAcs(ifname), getPskNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status_1_2.code);
     auto status = HIDL_INVOKE(hostapd_, removeAccessPoint, ifname);
     EXPECT_EQ(
@@ -381,8 +396,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
-                              getIfaceParamsWithInvalidChannel(ifname), getPskNwParams());
+    auto status =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithInvalidChannel(ifname), getPskNwParams());
     EXPECT_NE(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -394,8 +410,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
-                              getInvalidPskNwParams());
+    auto status =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithoutAcs(ifname), getInvalidPskNwParams());
     EXPECT_NE(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -408,7 +425,8 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
+    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                              getIfaceParamsWithoutAcs(ifname),
                               getInvalidSaeTransitionNwParams());
     EXPECT_NE(HostapdStatusCode::SUCCESS, status.code);
 }
@@ -422,8 +440,9 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
-                              getInvalidSaeNwParams());
+    auto status =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithoutAcs(ifname), getInvalidSaeNwParams());
     EXPECT_NE(HostapdStatusCode::SUCCESS, status.code);
 }
 
@@ -433,8 +452,8 @@
  */
 TEST_P(HostapdHidlTest, DisconnectClientWhenIfaceNotAvailable) {
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status = HIDL_INVOKE(hostapd_, forceClientDisconnect, ifname, kTestZeroMacAddr,
-                              kTestDisconnectReasonCode);
+    auto status = HIDL_INVOKE(hostapd_, forceClientDisconnect, ifname,
+                              kTestZeroMacAddr, kTestDisconnectReasonCode);
     EXPECT_EQ(HostapdStatusCode::FAILURE_IFACE_UNKNOWN, status.code);
 }
 
@@ -446,12 +465,13 @@
     if (is_1_3(hostapd_))
         GTEST_SKIP() << "Ignore addAccessPoint_1_2 on hostapd 1_3";
     std::string ifname = setupApIfaceIfNeededAndGetName();
-    auto status_1_2 = HIDL_INVOKE(hostapd_, addAccessPoint_1_2, getIfaceParamsWithoutAcs(ifname),
-                                  getOpenNwParams());
+    auto status_1_2 =
+        HIDL_INVOKE(hostapd_, addAccessPoint_1_2,
+                    getIfaceParamsWithoutAcs(ifname), getOpenNwParams());
     EXPECT_EQ(HostapdStatusCode::SUCCESS, status_1_2.code);
 
-    status_1_2 = HIDL_INVOKE(hostapd_, forceClientDisconnect, ifname, kTestZeroMacAddr,
-                             kTestDisconnectReasonCode);
+    status_1_2 = HIDL_INVOKE(hostapd_, forceClientDisconnect, ifname,
+                             kTestZeroMacAddr, kTestDisconnectReasonCode);
     EXPECT_EQ(HostapdStatusCode::FAILURE_CLIENT_UNKNOWN, status_1_2.code);
 }
 
diff --git a/wifi/hostapd/aidl/Android.bp b/wifi/hostapd/aidl/Android.bp
index c97f8da..54895c1 100644
--- a/wifi/hostapd/aidl/Android.bp
+++ b/wifi/hostapd/aidl/Android.bp
@@ -38,9 +38,7 @@
             min_sdk_version: "30",
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
+            gen_trace: true,
         },
     },
     versions_with_info: [
diff --git a/wifi/netlinkinterceptor/libnlinterceptor/include/libnlinterceptor/libnlinterceptor.h b/wifi/netlinkinterceptor/libnlinterceptor/include/libnlinterceptor/libnlinterceptor.h
index ac8653e..32e5a6e 100644
--- a/wifi/netlinkinterceptor/libnlinterceptor/include/libnlinterceptor/libnlinterceptor.h
+++ b/wifi/netlinkinterceptor/libnlinterceptor/include/libnlinterceptor/libnlinterceptor.h
@@ -117,14 +117,13 @@
     int clientSocketFd, const char* clientName,
     struct android_nlinterceptor_InterceptedSocket* interceptedSocket);
 
-void android_nlinterceptor_closeSocket(
-    const struct android_nlinterceptor_InterceptedSocket* sock);
+void android_nlinterceptor_closeSocket(struct android_nlinterceptor_InterceptedSocket sock);
 
-bool android_nlinterceptor_subscribe(
-    const struct android_nlinterceptor_InterceptedSocket* sock, uint32_t group);
+bool android_nlinterceptor_subscribe(struct android_nlinterceptor_InterceptedSocket sock,
+                                     uint32_t group);
 
-bool android_nlinterceptor_unsubscribe(
-    const struct android_nlinterceptor_InterceptedSocket* sock, uint32_t group);
+bool android_nlinterceptor_unsubscribe(struct android_nlinterceptor_InterceptedSocket sock,
+                                       uint32_t group);
 
 #ifdef __cplusplus
 }
diff --git a/wifi/netlinkinterceptor/libnlinterceptor/libnlinterceptor.cpp b/wifi/netlinkinterceptor/libnlinterceptor/libnlinterceptor.cpp
index 575f900..aae7a3a 100644
--- a/wifi/netlinkinterceptor/libnlinterceptor/libnlinterceptor.cpp
+++ b/wifi/netlinkinterceptor/libnlinterceptor/libnlinterceptor.cpp
@@ -150,25 +150,18 @@
     return true;
 }
 
-extern "C" void android_nlinterceptor_closeSocket(
-    const android_nlinterceptor_InterceptedSocket* sock) {
-    if (!sock) {
-        LOG(ERROR) << "Can't close socket identified by a null pointer!";
-        return;
-    }
-    closeSocket({sock->nlFamily, sock->portId});
+extern "C" void android_nlinterceptor_closeSocket(android_nlinterceptor_InterceptedSocket sock) {
+    closeSocket({sock.nlFamily, sock.portId});
 }
 
-extern "C" bool android_nlinterceptor_subscribe(
-    const android_nlinterceptor_InterceptedSocket* sock, uint32_t group) {
-    if (!sock) return false;
-    return subscribe({sock->nlFamily, sock->portId}, group);
+extern "C" bool android_nlinterceptor_subscribe(android_nlinterceptor_InterceptedSocket sock,
+                                                uint32_t group) {
+    return subscribe({sock.nlFamily, sock.portId}, group);
 }
 
-extern "C" bool android_nlinterceptor_unsubscribe(
-    const android_nlinterceptor_InterceptedSocket* sock, uint32_t group) {
-    if (!sock) return false;
-    return unsubscribe({sock->nlFamily, sock->portId}, group);
+extern "C" bool android_nlinterceptor_unsubscribe(android_nlinterceptor_InterceptedSocket sock,
+                                                  uint32_t group) {
+    return unsubscribe({sock.nlFamily, sock.portId}, group);
 }
 
 }  // namespace android::nlinterceptor
diff --git a/wifi/supplicant/aidl/Android.bp b/wifi/supplicant/aidl/Android.bp
index ca0785b..9cb4e51 100644
--- a/wifi/supplicant/aidl/Android.bp
+++ b/wifi/supplicant/aidl/Android.bp
@@ -38,9 +38,7 @@
             min_sdk_version: "30",
         },
         ndk: {
-            vndk: {
-                enabled: true,
-            },
+            gen_trace: true,
         },
     },
     versions_with_info: [
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
index d95bd03..b7984fa 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
@@ -19,6 +19,7 @@
 #include <aidl/Vintf.h>
 #include <aidl/android/hardware/wifi/supplicant/BnSupplicant.h>
 #include <aidl/android/hardware/wifi/supplicant/BnSupplicantP2pIfaceCallback.h>
+#include <aidl/android/hardware/wifi/supplicant/SupplicantStatusCode.h>
 #include <android/binder_manager.h>
 #include <android/binder_status.h>
 #include <binder/IServiceManager.h>
@@ -38,6 +39,7 @@
 using aidl::android::hardware::wifi::supplicant::P2pGroupCapabilityMask;
 using aidl::android::hardware::wifi::supplicant::P2pProvDiscStatusCode;
 using aidl::android::hardware::wifi::supplicant::P2pStatusCode;
+using aidl::android::hardware::wifi::supplicant::SupplicantStatusCode;
 using aidl::android::hardware::wifi::supplicant::WpsConfigMethods;
 using aidl::android::hardware::wifi::supplicant::WpsDevPasswordId;
 using aidl::android::hardware::wifi::supplicant::WpsProvisionMethod;
@@ -413,7 +415,12 @@
  */
 TEST_P(SupplicantP2pIfaceAidlTest, EnableMacRandomization) {
     // Enable twice
-    EXPECT_TRUE(p2p_iface_->setMacRandomization(true).isOk());
+    auto status = p2p_iface_->setMacRandomization(true);
+    if (!status.isOk() && status.getServiceSpecificError() ==
+                                  static_cast<int32_t>(SupplicantStatusCode::FAILURE_UNSUPPORTED)) {
+        GTEST_SKIP() << "Mac randomization is not supported.";
+    }
+    EXPECT_TRUE(status.isOk());
     EXPECT_TRUE(p2p_iface_->setMacRandomization(true).isOk());
 
     // Disable twice