Merge "Add face acquired constants"
diff --git a/graphics/composer/2.3/utils/hal/include/composer-hal/2.3/ComposerClient.h b/graphics/composer/2.3/utils/hal/include/composer-hal/2.3/ComposerClient.h
index 90603a7..f9d6774 100644
--- a/graphics/composer/2.3/utils/hal/include/composer-hal/2.3/ComposerClient.h
+++ b/graphics/composer/2.3/utils/hal/include/composer-hal/2.3/ComposerClient.h
@@ -39,25 +39,14 @@
class ComposerClientImpl : public V2_2::hal::detail::ComposerClientImpl<Interface, Hal> {
public:
Return<Error> setColorMode_2_3(Display display, ColorMode mode, RenderIntent intent) override {
-#ifndef USES_DISPLAY_RENDER_INTENTS
- if (intent != RenderIntent::COLORIMETRIC) {
- return Error::BAD_PARAMETER;
- }
-#endif
return mHal->setColorMode_2_3(display, mode, intent);
}
Return<void> getRenderIntents_2_3(Display display, ColorMode mode,
IComposerClient::getRenderIntents_2_3_cb hidl_cb) override {
-#ifdef USES_DISPLAY_RENDER_INTENTS
std::vector<RenderIntent> intents;
Error err = mHal->getRenderIntents_2_3(display, mode, &intents);
hidl_cb(err, intents);
-#else
- (void)display;
- (void)mode;
- hidl_cb(Error::NONE, hidl_vec<RenderIntent>({RenderIntent::COLORIMETRIC}));
-#endif
return Void();
}
diff --git a/sensors/2.0/default/Android.bp b/sensors/2.0/default/Android.bp
new file mode 100644
index 0000000..11612d3
--- /dev/null
+++ b/sensors/2.0/default/Android.bp
@@ -0,0 +1,37 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_binary {
+ name: "android.hardware.sensors@2.0-service",
+ defaults: ["hidl_defaults"],
+ vendor: true,
+ relative_install_path: "hw",
+ srcs: [
+ "service.cpp",
+ "Sensor.cpp",
+ "Sensors.cpp",
+ ],
+ init_rc: ["android.hardware.sensors@2.0-service.rc"],
+ shared_libs: [
+ "android.hardware.sensors@1.0",
+ "android.hardware.sensors@2.0",
+ "libcutils",
+ "libfmq",
+ "libhidlbase",
+ "libhidltransport",
+ "liblog",
+ "libutils",
+ ],
+}
diff --git a/sensors/2.0/default/OWNERS b/sensors/2.0/default/OWNERS
new file mode 100644
index 0000000..2031d84
--- /dev/null
+++ b/sensors/2.0/default/OWNERS
@@ -0,0 +1,2 @@
+bduddie@google.com
+bstack@google.com
diff --git a/sensors/2.0/default/Sensor.cpp b/sensors/2.0/default/Sensor.cpp
new file mode 100644
index 0000000..f4c9b57
--- /dev/null
+++ b/sensors/2.0/default/Sensor.cpp
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Sensor.h"
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V2_0 {
+namespace implementation {
+
+Sensor::Sensor() : mIsEnabled(false), mSamplingPeriodNs(0) {}
+
+const SensorInfo& Sensor::getSensorInfo() const {
+ return mSensorInfo;
+}
+
+bool Sensor::batch(int32_t samplingPeriodNs) {
+ bool success = true;
+ if (samplingPeriodNs >= mSensorInfo.minDelay * 1000 &&
+ samplingPeriodNs <= mSensorInfo.maxDelay * 1000) {
+ mSamplingPeriodNs = samplingPeriodNs;
+ } else {
+ success = false;
+ }
+ return success;
+}
+
+void Sensor::activate(bool enable) {
+ mIsEnabled = enable;
+}
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace sensors
+} // namespace hardware
+} // namespace android
\ No newline at end of file
diff --git a/sensors/2.0/default/Sensor.h b/sensors/2.0/default/Sensor.h
new file mode 100644
index 0000000..46026a4
--- /dev/null
+++ b/sensors/2.0/default/Sensor.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_SENSORS_V2_0_SENSOR_H
+#define ANDROID_HARDWARE_SENSORS_V2_0_SENSOR_H
+
+#include <android/hardware/sensors/1.0/types.h>
+
+using ::android::hardware::sensors::V1_0::SensorInfo;
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V2_0 {
+namespace implementation {
+
+class Sensor {
+ public:
+ Sensor();
+
+ const SensorInfo& getSensorInfo() const;
+ bool batch(int32_t samplingPeriodNs);
+ void activate(bool enable);
+
+ protected:
+ bool mIsEnabled;
+ int64_t mSamplingPeriodNs;
+ SensorInfo mSensorInfo;
+};
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace sensors
+} // namespace hardware
+} // namespace android
+
+#endif // ANDROID_HARDWARE_SENSORS_V2_0_SENSOR_H
\ No newline at end of file
diff --git a/sensors/2.0/default/Sensors.cpp b/sensors/2.0/default/Sensors.cpp
new file mode 100644
index 0000000..29721fa
--- /dev/null
+++ b/sensors/2.0/default/Sensors.cpp
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Sensors.h"
+
+#include <android/hardware/sensors/2.0/types.h>
+#include <log/log.h>
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V2_0 {
+namespace implementation {
+
+using ::android::hardware::sensors::V1_0::Event;
+using ::android::hardware::sensors::V1_0::OperationMode;
+using ::android::hardware::sensors::V1_0::RateLevel;
+using ::android::hardware::sensors::V1_0::Result;
+using ::android::hardware::sensors::V1_0::SharedMemInfo;
+
+Sensors::Sensors() : mEventQueueFlag(nullptr) {}
+
+Sensors::~Sensors() {
+ deleteEventFlag();
+}
+
+// Methods from ::android::hardware::sensors::V2_0::ISensors follow.
+Return<void> Sensors::getSensorsList(getSensorsList_cb _hidl_cb) {
+ std::vector<SensorInfo> sensors;
+ for (const auto& sensor : mSensors) {
+ sensors.push_back(sensor.second->getSensorInfo());
+ }
+
+ // Call the HIDL callback with the SensorInfo
+ _hidl_cb(sensors);
+
+ return Void();
+}
+
+Return<Result> Sensors::setOperationMode(OperationMode /* mode */) {
+ // TODO implement
+ return Result{};
+}
+
+Return<Result> Sensors::activate(int32_t sensorHandle, bool enabled) {
+ auto sensor = mSensors.find(sensorHandle);
+ if (sensor != mSensors.end()) {
+ sensor->second->activate(enabled);
+ return Result::OK;
+ }
+ return Result::BAD_VALUE;
+}
+
+Return<Result> Sensors::initialize(
+ const ::android::hardware::MQDescriptorSync<Event>& eventQueueDescriptor,
+ const ::android::hardware::MQDescriptorSync<uint32_t>& wakeLockDescriptor,
+ const sp<ISensorsCallback>& sensorsCallback) {
+ Result result = Result::OK;
+
+ // Save a reference to the callback
+ mCallback = sensorsCallback;
+
+ // Create the Event FMQ from the eventQueueDescriptor. Reset the read/write positions.
+ mEventQueue =
+ std::make_unique<EventMessageQueue>(eventQueueDescriptor, true /* resetPointers */);
+
+ // Ensure that any existing EventFlag is properly deleted
+ deleteEventFlag();
+
+ // Create the EventFlag that is used to signal to the framework that sensor events have been
+ // written to the Event FMQ
+ if (EventFlag::createEventFlag(mEventQueue->getEventFlagWord(), &mEventQueueFlag) != OK) {
+ result = Result::BAD_VALUE;
+ }
+
+ // Create the Wake Lock FMQ that is used by the framework to communicate whenever WAKE_UP
+ // events have been successfully read and handled by the framework.
+ mWakeLockQueue =
+ std::make_unique<WakeLockMessageQueue>(wakeLockDescriptor, true /* resetPointers */);
+
+ if (!mCallback || !mEventQueue || !mWakeLockQueue || mEventQueueFlag == nullptr) {
+ result = Result::BAD_VALUE;
+ }
+
+ return result;
+}
+
+Return<Result> Sensors::batch(int32_t sensorHandle, int64_t samplingPeriodNs,
+ int64_t /* maxReportLatencyNs */) {
+ Result result = Result::BAD_VALUE;
+ auto sensor = mSensors.find(sensorHandle);
+ if (sensor != mSensors.end() && sensor->second->batch(samplingPeriodNs)) {
+ result = Result::OK;
+ }
+ return result;
+}
+
+Return<Result> Sensors::flush(int32_t /* sensorHandle */) {
+ // TODO implement
+ return Result{};
+}
+
+Return<Result> Sensors::injectSensorData(const Event& /* event */) {
+ // TODO implement
+ return Result{};
+}
+
+Return<void> Sensors::registerDirectChannel(const SharedMemInfo& /* mem */,
+ registerDirectChannel_cb _hidl_cb) {
+ _hidl_cb(Result::INVALID_OPERATION, 0 /* channelHandle */);
+ return Return<void>();
+}
+
+Return<Result> Sensors::unregisterDirectChannel(int32_t /* channelHandle */) {
+ return Result::INVALID_OPERATION;
+}
+
+Return<void> Sensors::configDirectReport(int32_t /* sensorHandle */, int32_t /* channelHandle */,
+ RateLevel /* rate */, configDirectReport_cb _hidl_cb) {
+ _hidl_cb(Result::INVALID_OPERATION, 0 /* reportToken */);
+ return Return<void>();
+}
+
+void Sensors::deleteEventFlag() {
+ status_t status = EventFlag::deleteEventFlag(&mEventQueueFlag);
+ if (status != OK) {
+ ALOGI("Failed to delete event flag: %d", status);
+ }
+}
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace sensors
+} // namespace hardware
+} // namespace android
diff --git a/sensors/2.0/default/Sensors.h b/sensors/2.0/default/Sensors.h
new file mode 100644
index 0000000..64ee5c5
--- /dev/null
+++ b/sensors/2.0/default/Sensors.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_SENSORS_V2_0_SENSORS_H
+#define ANDROID_HARDWARE_SENSORS_V2_0_SENSORS_H
+
+#include "Sensor.h"
+
+#include <android/hardware/sensors/2.0/ISensors.h>
+#include <fmq/MessageQueue.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+#include <memory>
+
+namespace android {
+namespace hardware {
+namespace sensors {
+namespace V2_0 {
+namespace implementation {
+
+using ::android::sp;
+using ::android::hardware::EventFlag;
+using ::android::hardware::hidl_array;
+using ::android::hardware::hidl_memory;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::MessageQueue;
+using ::android::hardware::MQDescriptor;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+
+struct Sensors : public ISensors {
+ using Event = ::android::hardware::sensors::V1_0::Event;
+ using OperationMode = ::android::hardware::sensors::V1_0::OperationMode;
+ using RateLevel = ::android::hardware::sensors::V1_0::RateLevel;
+ using Result = ::android::hardware::sensors::V1_0::Result;
+ using SharedMemInfo = ::android::hardware::sensors::V1_0::SharedMemInfo;
+
+ Sensors();
+ virtual ~Sensors();
+
+ // Methods from ::android::hardware::sensors::V2_0::ISensors follow.
+ Return<void> getSensorsList(getSensorsList_cb _hidl_cb) override;
+
+ Return<Result> setOperationMode(OperationMode mode) override;
+
+ Return<Result> activate(int32_t sensorHandle, bool enabled) override;
+
+ Return<Result> initialize(
+ const ::android::hardware::MQDescriptorSync<Event>& eventQueueDescriptor,
+ const ::android::hardware::MQDescriptorSync<uint32_t>& wakeLockDescriptor,
+ const sp<ISensorsCallback>& sensorsCallback) override;
+
+ Return<Result> batch(int32_t sensorHandle, int64_t samplingPeriodNs,
+ int64_t maxReportLatencyNs) override;
+
+ Return<Result> flush(int32_t sensorHandle) override;
+
+ Return<Result> injectSensorData(const Event& event) override;
+
+ Return<void> registerDirectChannel(const SharedMemInfo& mem,
+ registerDirectChannel_cb _hidl_cb) override;
+
+ Return<Result> unregisterDirectChannel(int32_t channelHandle) override;
+
+ Return<void> configDirectReport(int32_t sensorHandle, int32_t channelHandle, RateLevel rate,
+ configDirectReport_cb _hidl_cb) override;
+
+ private:
+ /**
+ * Utility function to delete the Event Flag
+ */
+ void deleteEventFlag();
+
+ using EventMessageQueue = MessageQueue<Event, kSynchronizedReadWrite>;
+ using WakeLockMessageQueue = MessageQueue<uint32_t, kSynchronizedReadWrite>;
+
+ /**
+ * The Event FMQ where sensor events are written
+ */
+ std::unique_ptr<EventMessageQueue> mEventQueue;
+
+ /**
+ * The Wake Lock FMQ that is read to determine when the framework has handled WAKE_UP events
+ */
+ std::unique_ptr<WakeLockMessageQueue> mWakeLockQueue;
+
+ /**
+ * Event Flag to signal to the framework when sensor events are available to be read
+ */
+ EventFlag* mEventQueueFlag;
+
+ /**
+ * Callback for asynchronous events, such as dynamic sensor connections.
+ */
+ sp<ISensorsCallback> mCallback;
+
+ /**
+ * A map of the available sensors
+ */
+ std::map<int32_t, std::shared_ptr<Sensor>> mSensors;
+};
+
+} // namespace implementation
+} // namespace V2_0
+} // namespace sensors
+} // namespace hardware
+} // namespace android
+
+#endif // ANDROID_HARDWARE_SENSORS_V2_0_SENSORS_H
diff --git a/sensors/2.0/default/android.hardware.sensors@2.0-service.rc b/sensors/2.0/default/android.hardware.sensors@2.0-service.rc
new file mode 100644
index 0000000..321d760
--- /dev/null
+++ b/sensors/2.0/default/android.hardware.sensors@2.0-service.rc
@@ -0,0 +1,5 @@
+service vendor.sensors-hal-2-0 /vendor/bin/hw/android.hardware.sensors@2.0-service
+ class hal
+ user system
+ group system
+ rlimit rtprio 10 10
diff --git a/sensors/2.0/default/service.cpp b/sensors/2.0/default/service.cpp
new file mode 100644
index 0000000..5c13e33
--- /dev/null
+++ b/sensors/2.0/default/service.cpp
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.sensors@2.0-service"
+
+#include <android/hardware/sensors/2.0/ISensors.h>
+#include <hidl/HidlTransportSupport.h>
+#include <log/log.h>
+#include <utils/StrongPointer.h>
+#include "Sensors.h"
+
+using android::hardware::configureRpcThreadpool;
+using android::hardware::joinRpcThreadpool;
+using android::hardware::sensors::V2_0::ISensors;
+using android::hardware::sensors::V2_0::implementation::Sensors;
+
+int main(int /* argc */, char** /* argv */) {
+ configureRpcThreadpool(1, true);
+
+ android::sp<ISensors> sensors = new Sensors();
+ if (sensors->registerAsService() != ::android::OK) {
+ ALOGE("Failed to register Sensors HAL instance");
+ return -1;
+ }
+
+ joinRpcThreadpool();
+ return 1; // joinRpcThreadpool shouldn't exit
+}
diff --git a/wifi/supplicant/1.2/Android.bp b/wifi/supplicant/1.2/Android.bp
new file mode 100644
index 0000000..bafd148
--- /dev/null
+++ b/wifi/supplicant/1.2/Android.bp
@@ -0,0 +1,19 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+ name: "android.hardware.wifi.supplicant@1.2",
+ root: "android.hardware",
+ vndk: {
+ enabled: true,
+ },
+ srcs: [
+ "ISupplicantStaNetwork.hal",
+ ],
+ interfaces: [
+ "android.hardware.wifi.supplicant@1.0",
+ "android.hardware.wifi.supplicant@1.1",
+ "android.hidl.base@1.0",
+ ],
+ gen_java: true,
+}
+
diff --git a/wifi/supplicant/1.2/ISupplicantStaNetwork.hal b/wifi/supplicant/1.2/ISupplicantStaNetwork.hal
new file mode 100644
index 0000000..0bba096
--- /dev/null
+++ b/wifi/supplicant/1.2/ISupplicantStaNetwork.hal
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi.supplicant@1.2;
+
+import @1.0::ISupplicantStaNetworkCallback;
+import @1.0::ISupplicantStaNetwork;
+import @1.0::SupplicantStatus;
+import @1.1::ISupplicantStaNetwork;
+
+/**
+ * Interface exposed by the supplicant for each station mode network
+ * configuration it controls.
+ */
+interface ISupplicantStaNetwork extends @1.1::ISupplicantStaNetwork {
+ /** Possble mask of values for KeyMgmt param. */
+ enum KeyMgmtMask : @1.0::ISupplicantStaNetwork.KeyMgmtMask {
+ /** WPA3-Personal SAE Key management */
+ SAE = 1 << 10,
+
+ /** WPA3-Enterprise Suite-B Key management */
+ SUITE_B_192 = 1 << 17,
+
+ /** Enhacned Open (OWE) Key management */
+ OWE = 1 << 22,
+ };
+
+ /** Possble mask of values for PairwiseCipher param. */
+ enum PairwiseCipherMask : @1.0::ISupplicantStaNetwork.PairwiseCipherMask {
+ /** GCMP-256 Pairwise Cipher */
+ GCMP_256 = 1 << 8,
+ };
+
+ /** Possble mask of values for GroupCipher param. */
+ enum GroupCipherMask : @1.0::ISupplicantStaNetwork.GroupCipherMask {
+ /** GCMP-256 Group Cipher */
+ GCMP_256 = 1 << 8,
+ };
+
+ /**
+ * Set key management mask for the network.
+ *
+ * @param keyMgmtMask value to set.
+ * Combination of |KeyMgmtMask| values.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ setKeyMgmt_1_2(bitfield<KeyMgmtMask> keyMgmtMask) generates (SupplicantStatus status);
+
+ /**
+ * Get the key mgmt mask set for the network.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ * @return keyMgmtMask Combination of |KeyMgmtMask| values.
+ */
+ getKeyMgmt_1_2()
+ generates (SupplicantStatus status, bitfield<KeyMgmtMask> keyMgmtMask);
+
+ /**
+ * Set pairwise cipher mask for the network.
+ *
+ * @param pairwiseCipherMask value to set.
+ * Combination of |PairwiseCipherMask| values.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ setPairwiseCipher_1_2(bitfield<PairwiseCipherMask> pairwiseCipherMask)
+ generates (SupplicantStatus status);
+
+ /**
+ * Get the pairwise cipher mask set for the network.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ * @return pairwiseCipherMask Combination of |PairwiseCipherMask| values.
+ */
+ getPairwiseCipher_1_2()
+ generates (SupplicantStatus status,
+ bitfield<PairwiseCipherMask> pairwiseCipherMask);
+
+ /**
+ * Set group cipher mask for the network.
+ *
+ * @param groupCipherMask value to set.
+ * Combination of |GroupCipherMask| values.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ setGroupCipher_1_2(bitfield<GroupCipherMask> groupCipherMask)
+ generates (SupplicantStatus status);
+
+ /**
+ * Get the group cipher mask set for the network.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ * @return groupCipherMask Combination of |GroupCipherMask| values.
+ */
+ getGroupCipher_1_2()
+ generates (SupplicantStatus status,
+ bitfield<GroupCipherMask> groupCipherMask);
+
+ /**
+ * Enable TLS Suite-B in EAP Phase1
+ *
+ * @param enable Set to true to enable TLS Suite-B in EAP phase1
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ enableTlsSuiteBEapPhase1Param(bool enable)
+ generates (SupplicantStatus status);
+
+ /**
+ * Set EAP OpenSSL Suite-B-192 ciphers for WPA3-Enterprise
+ * Supported option:
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ enableSuiteBEapOpenSslCiphers()
+ generates (SupplicantStatus status);
+
+ /**
+ * Get SAE password for WPA3-Personal
+ *
+ * @return status Status of the operation, and a string.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ getSaePassword()
+ generates (SupplicantStatus status, string saePassword);
+
+ /**
+ * Get SAE password ID for WPA3-Personal
+ *
+ * @return status Status of the operation, and a string.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ getSaePasswordId()
+ generates (SupplicantStatus status, string saePasswordId);
+
+ /**
+ * Set SAE password for WPA3-Personal
+ *
+ * @param saePassword string with the above option
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ setSaePassword(string saePassword)
+ generates (SupplicantStatus status);
+
+ /**
+ * Set SAE password ID for WPA3-Personal
+ *
+ * @param sae_password_id string with the above option
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ setSaePasswordId(string saePasswordId)
+ generates (SupplicantStatus status);
+
+ /**
+ * Get Key management capabilities of the device
+ *
+ * @return status Status of the operation, and a string.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+ */
+ getKeyMgmtCapabilities()
+ generates (SupplicantStatus status, bitfield<KeyMgmtMask> keyMgmtMask);
+};