diff --git a/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/ComplianceWarning.aidl b/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/ComplianceWarning.aidl
new file mode 100644
index 0000000..8b67070
--- /dev/null
+++ b/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/ComplianceWarning.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.usb;
+@Backing(type="int") @VintfStability
+enum ComplianceWarning {
+  OTHER = 1,
+  DEBUG_ACCESSORY = 2,
+  BC_1_2 = 3,
+  MISSING_RP = 4,
+}
diff --git a/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/IUsb.aidl b/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/IUsb.aidl
index f866c1e..859f526 100644
--- a/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/IUsb.aidl
+++ b/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/IUsb.aidl
@@ -41,5 +41,5 @@
   oneway void setCallback(in android.hardware.usb.IUsbCallback callback);
   oneway void switchRole(in String portName, in android.hardware.usb.PortRole role, long transactionId);
   oneway void limitPowerTransfer(in String portName, boolean limit, long transactionId);
-  oneway void resetUsbPort(in String portName,long transactionId);
+  oneway void resetUsbPort(in String portName, long transactionId);
 }
diff --git a/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/PortStatus.aidl b/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/PortStatus.aidl
index dfd99fb..b0b7552 100644
--- a/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/PortStatus.aidl
+++ b/usb/aidl/aidl_api/android.hardware.usb/current/android/hardware/usb/PortStatus.aidl
@@ -50,4 +50,6 @@
   android.hardware.usb.UsbDataStatus[] usbDataStatus;
   boolean powerTransferLimited;
   android.hardware.usb.PowerBrickStatus powerBrickStatus;
+  boolean supportsComplianceWarnings = false;
+  android.hardware.usb.ComplianceWarning[] complianceWarnings = {};
 }
diff --git a/usb/aidl/android/hardware/usb/ComplianceWarning.aidl b/usb/aidl/android/hardware/usb/ComplianceWarning.aidl
new file mode 100644
index 0000000..4c18a31
--- /dev/null
+++ b/usb/aidl/android/hardware/usb/ComplianceWarning.aidl
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.usb;
+
+@VintfStability
+@Backing(type="int")
+/**
+ * Indicates the potential non-compliance reasons for the
+ * connected USB Type-C port partner which could be a power
+ * source, accessory or cable. Applicable for USB-C receptacles
+ * in Android devices.
+ */
+enum ComplianceWarning {
+    /**
+     * Used to indicate Type-C sources/cables/accessories/ports
+     * whose issue is not listed below but do not meet
+     * specification requirements from including but not limited to
+     * USB Type-C Cable and Connector Specification, Universal Serial Bus
+     * Power Delivery Specification, and Universal Serial Bus
+     * 1.x/2.0/3.x/4.0.
+     */
+    OTHER = 1,
+    /**
+     * Used to indicate Type-C port partner
+     * (cable/accessory/source) that identifies itself as debug
+     * accessory source as defined in USB Type-C Cable and
+     * Connector Specification. However, the specification
+     * states that this is meant for debug only and shall not
+     * be used for with commercial products.
+     */
+    DEBUG_ACCESSORY = 2,
+    /**
+     * Used to indicate Type-C port partner that does not
+     * identify itself as one of the charging port types
+     * (SDP/CDP/DCP etc) as defined by Battery Charging v1.2
+     * Specification.
+     */
+    BC_1_2 = 3,
+    /**
+     * Used to indicate Type-C sources/cables that are missing
+     * pull up resistors on the CC pins as required by USB
+     * Type-C Cable and Connector Specification.
+     */
+    MISSING_RP = 4,
+}
diff --git a/usb/aidl/android/hardware/usb/PortStatus.aidl b/usb/aidl/android/hardware/usb/PortStatus.aidl
index 51bee71..d7e61ec 100644
--- a/usb/aidl/android/hardware/usb/PortStatus.aidl
+++ b/usb/aidl/android/hardware/usb/PortStatus.aidl
@@ -19,6 +19,7 @@
 import android.hardware.usb.ContaminantDetectionStatus;
 import android.hardware.usb.ContaminantProtectionMode;
 import android.hardware.usb.ContaminantProtectionStatus;
+import android.hardware.usb.ComplianceWarning;
 import android.hardware.usb.PortDataRole;
 import android.hardware.usb.PortMode;
 import android.hardware.usb.PortPowerRole;
@@ -115,4 +116,15 @@
      * Denotes whether Power brick is connected.
      */
     PowerBrickStatus powerBrickStatus;
+    /**
+     * True if the hal implementation can support identifying
+     * non compliant USB power source/cable/accessory. False other
+     * otherwise.
+     */
+    boolean supportsComplianceWarnings = false;
+    /**
+     * List of reasons as to why the attached USB
+     * power source/cable/accessory is non compliant.
+     */
+    ComplianceWarning[] complianceWarnings = {};
 }
diff --git a/usb/aidl/default/Android.bp b/usb/aidl/default/Android.bp
index 7cb2822..2e2c3d9 100644
--- a/usb/aidl/default/Android.bp
+++ b/usb/aidl/default/Android.bp
@@ -34,10 +34,10 @@
         "Usb.cpp",
     ],
     shared_libs: [
-        "android.hardware.usb-V1-ndk",
+        "android.hardware.usb-V2-ndk",
         "libbase",
         "libbinder_ndk",
-	"libcutils",
+        "libcutils",
         "liblog",
         "libutils",
     ],
diff --git a/usb/aidl/default/Usb.cpp b/usb/aidl/default/Usb.cpp
index 7e738c4..dd12da0 100644
--- a/usb/aidl/default/Usb.cpp
+++ b/usb/aidl/default/Usb.cpp
@@ -123,6 +123,15 @@
     return Status::SUCCESS;
 }
 
+Status queryNonCompliantChargerStatus(std::vector<PortStatus> *currentPortStatus) {
+    string reasons, path;
+
+    for (int i = 0; i < currentPortStatus->size(); i++) {
+        (*currentPortStatus)[i].supportsComplianceWarnings = false;
+    }
+    return Status::SUCCESS;
+}
+
 string appendRoleNodeHelper(const string &portName, PortRole::Tag tag) {
     string node(kTypecPath + portName);
 
@@ -527,6 +536,7 @@
     pthread_mutex_lock(&usb->mLock);
     status = getPortStatusHelper(currentPortStatus);
     queryMoistureDetectionStatus(currentPortStatus);
+    queryNonCompliantChargerStatus(currentPortStatus);
     if (usb->mCallback != NULL) {
         ScopedAStatus ret = usb->mCallback->notifyPortStatusChange(*currentPortStatus,
             status);
diff --git a/usb/aidl/default/android.hardware.usb-service.example.xml b/usb/aidl/default/android.hardware.usb-service.example.xml
index 6088194..c3f07f5 100644
--- a/usb/aidl/default/android.hardware.usb-service.example.xml
+++ b/usb/aidl/default/android.hardware.usb-service.example.xml
@@ -1,7 +1,7 @@
 <manifest version="1.0" type="device">
     <hal format="aidl">
         <name>android.hardware.usb</name>
-        <version>1</version>
+        <version>2</version>
         <interface>
             <name>IUsb</name>
             <instance>default</instance>
diff --git a/usb/aidl/vts/Android.bp b/usb/aidl/vts/Android.bp
index 00a7c93..d0e0eec 100644
--- a/usb/aidl/vts/Android.bp
+++ b/usb/aidl/vts/Android.bp
@@ -34,7 +34,7 @@
         "libbinder_ndk",
     ],
     static_libs: [
-        "android.hardware.usb-V1-ndk",
+        "android.hardware.usb-V2-ndk",
     ],
     test_suites: [
         "general-tests",
diff --git a/usb/aidl/vts/VtsAidlUsbTargetTest.cpp b/usb/aidl/vts/VtsAidlUsbTargetTest.cpp
index ea2f985..c4ec8a4 100644
--- a/usb/aidl/vts/VtsAidlUsbTargetTest.cpp
+++ b/usb/aidl/vts/VtsAidlUsbTargetTest.cpp
@@ -43,6 +43,7 @@
 #define TIMEOUT_PERIOD 10
 
 using ::aidl::android::hardware::usb::BnUsbCallback;
+using ::aidl::android::hardware::usb::ComplianceWarning;
 using ::aidl::android::hardware::usb::IUsb;
 using ::aidl::android::hardware::usb::IUsbCallback;
 using ::aidl::android::hardware::usb::PortDataRole;
@@ -560,6 +561,53 @@
   ALOGI("UsbAidlTest resetUsbPort end");
 }
 
+/*
+ * Test charger compliance warning
+ * The test asserts that complianceWarnings is
+ * empty when the feature is not supported. i.e.
+ * supportsComplianceWarning is false.
+ */
+TEST_P(UsbAidlTest, nonCompliantChargerStatus) {
+    ALOGI("UsbAidlTest nonCompliantChargerStatus start");
+    int64_t transactionId = rand() % 10000;
+    const auto& ret = usb->queryPortStatus(transactionId);
+    ASSERT_TRUE(ret.isOk());
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(2, usb_last_cookie);
+    EXPECT_EQ(transactionId, last_transactionId);
+
+    if (!usb_last_port_status.supportsComplianceWarnings) {
+      EXPECT_TRUE(usb_last_port_status.complianceWarnings.empty());
+    }
+
+    ALOGI("UsbAidlTest nonCompliantChargerStatus end");
+}
+
+/*
+ * Test charger compliance warning values
+ * The test asserts that complianceWarning values
+ * are valid.
+ */
+TEST_P(UsbAidlTest, nonCompliantChargerValues) {
+    ALOGI("UsbAidlTest nonCompliantChargerValues start");
+    int64_t transactionId = rand() % 10000;
+    const auto& ret = usb->queryPortStatus(transactionId);
+    ASSERT_TRUE(ret.isOk());
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(2, usb_last_cookie);
+    EXPECT_EQ(transactionId, last_transactionId);
+
+    // Current compliance values range from [1, 4]
+    if (usb_last_port_status.supportsComplianceWarnings) {
+      for (auto warning : usb_last_port_status.complianceWarnings) {
+        EXPECT_TRUE((int)warning >= (int)ComplianceWarning::OTHER);
+        EXPECT_TRUE((int)warning <= (int)ComplianceWarning::MISSING_RP);
+      }
+    }
+
+    ALOGI("UsbAidlTest nonCompliantChargerValues end");
+}
+
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(UsbAidlTest);
 INSTANTIATE_TEST_SUITE_P(
         PerInstance, UsbAidlTest,