diff --git a/audio/aidl/default/EngineConfigXmlConverter.cpp b/audio/aidl/default/EngineConfigXmlConverter.cpp
index 5a8b0a3..d945b17 100644
--- a/audio/aidl/default/EngineConfigXmlConverter.cpp
+++ b/audio/aidl/default/EngineConfigXmlConverter.cpp
@@ -179,8 +179,13 @@
         const eng_xsd::ProductStrategies::ProductStrategy& xsdcProductStrategy) {
     AudioHalProductStrategy aidlProductStrategy;
 
-    aidlProductStrategy.id =
-            VALUE_OR_FATAL(convertProductStrategyIdToAidl(xsdcProductStrategy.getId()));
+    if (xsdcProductStrategy.hasId()) {
+        aidlProductStrategy.id =
+                VALUE_OR_FATAL(convertProductStrategyIdToAidl(xsdcProductStrategy.getId()));
+    } else {
+        aidlProductStrategy.id =
+                VALUE_OR_FATAL(convertProductStrategyNameToAidl(xsdcProductStrategy.getName()));
+    }
     aidlProductStrategy.name = xsdcProductStrategy.getName();
 
     if (xsdcProductStrategy.hasAttributesGroup()) {
diff --git a/audio/aidl/default/config/audioPolicy/engine/audio_policy_engine_configuration.xsd b/audio/aidl/default/config/audioPolicy/engine/audio_policy_engine_configuration.xsd
index 7d9b06e..02250c7 100644
--- a/audio/aidl/default/config/audioPolicy/engine/audio_policy_engine_configuration.xsd
+++ b/audio/aidl/default/config/audioPolicy/engine/audio_policy_engine_configuration.xsd
@@ -105,7 +105,8 @@
                         <xs:element name="AttributesGroup" type="AttributesGroup" minOccurs="1" maxOccurs="unbounded"/>
                     </xs:sequence>
                     <xs:attribute name="name" type="xs:string" use="required"/>
-                    <xs:attribute name="id" type="xs:int" use="required"/>
+                    <!-- Only needs to be specified for vendor strategies. -->
+                    <xs:attribute name="id" type="xs:int" use="optional"/>
                 </xs:complexType>
             </xs:element>
         </xs:sequence>
diff --git a/audio/aidl/vts/EffectHelper.h b/audio/aidl/vts/EffectHelper.h
index eedac3d..8ceb56b 100644
--- a/audio/aidl/vts/EffectHelper.h
+++ b/audio/aidl/vts/EffectHelper.h
@@ -47,6 +47,7 @@
 using aidl::android::hardware::audio::effect::getRange;
 using aidl::android::hardware::audio::effect::IEffect;
 using aidl::android::hardware::audio::effect::isRangeValid;
+using aidl::android::hardware::audio::effect::kDrainSupportedVersion;
 using aidl::android::hardware::audio::effect::kEffectTypeUuidSpatializer;
 using aidl::android::hardware::audio::effect::kEventFlagDataMqNotEmpty;
 using aidl::android::hardware::audio::effect::kEventFlagDataMqUpdate;
@@ -195,8 +196,11 @@
                 ASSERT_TRUE(expectState(effect, State::PROCESSING));
                 break;
             case CommandId::STOP:
-                ASSERT_TRUE(expectState(effect, State::IDLE) ||
-                            expectState(effect, State::DRAINING));
+                // Enforce the state checking after kDrainSupportedVersion
+                if (getHalVersion(effect) >= kDrainSupportedVersion) {
+                    ASSERT_TRUE(expectState(effect, State::IDLE) ||
+                                expectState(effect, State::DRAINING));
+                }
                 break;
             case CommandId::RESET:
                 ASSERT_TRUE(expectState(effect, State::IDLE));
@@ -518,6 +522,11 @@
         }
     }
 
+    static int getHalVersion(const std::shared_ptr<IEffect>& effect) {
+        int version = 0;
+        return (effect && effect->getInterfaceVersion(&version).isOk()) ? version : 0;
+    }
+
     bool mIsSpatializer;
     Descriptor mDescriptor;
     size_t mInputFrameSize, mOutputFrameSize;
diff --git a/audio/aidl/vts/VtsHalAECTargetTest.cpp b/audio/aidl/vts/VtsHalAECTargetTest.cpp
index 53b6757..c007f18 100644
--- a/audio/aidl/vts/VtsHalAECTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalAECTargetTest.cpp
@@ -139,12 +139,12 @@
 };
 
 TEST_P(AECParamTest, SetAndGetEchoDelay) {
-    EXPECT_NO_FATAL_FAILURE(addEchoDelayParam(mEchoDelay));
+    addEchoDelayParam(mEchoDelay);
     SetAndGetParameters();
 }
 
 TEST_P(AECParamTest, SetAndGetMobileMode) {
-    EXPECT_NO_FATAL_FAILURE(addMobileModeParam(mMobileMode));
+    addMobileModeParam(mMobileMode);
     SetAndGetParameters();
 }
 
diff --git a/audio/aidl/vts/VtsHalAGC1TargetTest.cpp b/audio/aidl/vts/VtsHalAGC1TargetTest.cpp
index f14afbc..72a2d5e 100644
--- a/audio/aidl/vts/VtsHalAGC1TargetTest.cpp
+++ b/audio/aidl/vts/VtsHalAGC1TargetTest.cpp
@@ -139,17 +139,17 @@
 };
 
 TEST_P(AGC1ParamTest, SetAndGetTargetPeakLevelParam) {
-    EXPECT_NO_FATAL_FAILURE(addTargetPeakLevelParam(mTargetPeakLevel));
+    addTargetPeakLevelParam(mTargetPeakLevel);
     SetAndGetParameters();
 }
 
 TEST_P(AGC1ParamTest, SetAndGetMaxCompressionGain) {
-    EXPECT_NO_FATAL_FAILURE(addMaxCompressionGainParam(mMaxCompressionGain));
+    addMaxCompressionGainParam(mMaxCompressionGain);
     SetAndGetParameters();
 }
 
 TEST_P(AGC1ParamTest, SetAndGetEnableLimiter) {
-    EXPECT_NO_FATAL_FAILURE(addEnableLimiterParam(mEnableLimiter));
+    addEnableLimiterParam(mEnableLimiter);
     SetAndGetParameters();
 }
 
diff --git a/audio/aidl/vts/VtsHalAGC2TargetTest.cpp b/audio/aidl/vts/VtsHalAGC2TargetTest.cpp
index 048d540..ccac8c5 100644
--- a/audio/aidl/vts/VtsHalAGC2TargetTest.cpp
+++ b/audio/aidl/vts/VtsHalAGC2TargetTest.cpp
@@ -145,17 +145,17 @@
 };
 
 TEST_P(AGC2ParamTest, SetAndGetDigitalGainParam) {
-    EXPECT_NO_FATAL_FAILURE(addDigitalGainParam(mGain));
+    addDigitalGainParam(mGain);
     SetAndGetParameters();
 }
 
 TEST_P(AGC2ParamTest, SetAndGetSaturationMargin) {
-    EXPECT_NO_FATAL_FAILURE(addSaturationMarginParam(mMargin));
+    addSaturationMarginParam(mMargin);
     SetAndGetParameters();
 }
 
 TEST_P(AGC2ParamTest, SetAndGetLevelEstimator) {
-    EXPECT_NO_FATAL_FAILURE(addLevelEstimatorParam(mLevelEstimator));
+    addLevelEstimatorParam(mLevelEstimator);
     SetAndGetParameters();
 }
 
diff --git a/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp b/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp
index 3b1f3d9..37441f0 100644
--- a/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp
+++ b/audio/aidl/vts/VtsHalDynamicsProcessingTest.cpp
@@ -542,7 +542,7 @@
 };
 
 TEST_P(DynamicsProcessingTestEngineArchitecture, SetAndGetEngineArch) {
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mCfg));
+    addEngineConfig(mCfg);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
@@ -594,7 +594,7 @@
 };
 
 TEST_P(DynamicsProcessingTestInputGain, SetAndGetInputGain) {
-    EXPECT_NO_FATAL_FAILURE(addInputGain(mInputGain));
+    addInputGain(mInputGain);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
@@ -652,7 +652,7 @@
             mInputGain.push_back(DynamicsProcessing::InputGain(i, gainDb));
         }
         std::vector<float> output(mInput.size());
-        EXPECT_NO_FATAL_FAILURE(addInputGain(mInputGain));
+        addInputGain(mInputGain);
         EXPECT_NO_FATAL_FAILURE(setParamsAndProcess(mInput, output));
         if (!isAllParamsValid()) {
             continue;
@@ -719,8 +719,8 @@
 };
 
 TEST_P(DynamicsProcessingTestLimiterConfig, SetAndGetLimiterConfig) {
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
-    EXPECT_NO_FATAL_FAILURE(addLimiterConfig(mLimiterConfigList));
+    addEngineConfig(mEngineConfigPreset);
+    addLimiterConfig(mLimiterConfigList);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
@@ -782,8 +782,8 @@
     }
 
     void setLimiterParamsAndProcess(std::vector<float>& input, std::vector<float>& output) {
-        EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
-        EXPECT_NO_FATAL_FAILURE(addLimiterConfig(mLimiterConfigList));
+        addEngineConfig(mEngineConfigPreset);
+        addLimiterConfig(mLimiterConfigList);
         EXPECT_NO_FATAL_FAILURE(setParamsAndProcess(input, output));
     }
 
@@ -937,20 +937,20 @@
 };
 
 TEST_P(DynamicsProcessingTestChannelConfig, SetAndGetPreEqChannelConfig) {
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
-    EXPECT_NO_FATAL_FAILURE(addPreEqChannelConfig(mCfg));
+    addEngineConfig(mEngineConfigPreset);
+    addPreEqChannelConfig(mCfg);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
 TEST_P(DynamicsProcessingTestChannelConfig, SetAndGetPostEqChannelConfig) {
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
-    EXPECT_NO_FATAL_FAILURE(addPostEqChannelConfig(mCfg));
+    addEngineConfig(mEngineConfigPreset);
+    addPostEqChannelConfig(mCfg);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
 TEST_P(DynamicsProcessingTestChannelConfig, SetAndGetMbcChannelConfig) {
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
-    EXPECT_NO_FATAL_FAILURE(addMbcChannelConfig(mCfg));
+    addEngineConfig(mEngineConfigPreset);
+    addMbcChannelConfig(mCfg);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
@@ -1018,27 +1018,27 @@
 
 TEST_P(DynamicsProcessingTestEqBandConfig, SetAndGetPreEqBandConfig) {
     mEngineConfigPreset.preEqStage.bandCount = mCfgs.size();
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
+    addEngineConfig(mEngineConfigPreset);
     std::vector<DynamicsProcessing::ChannelConfig> cfgs(mChannelCount);
     for (int i = 0; i < mChannelCount; i++) {
         cfgs[i].channel = i;
         cfgs[i].enable = true;
     }
-    EXPECT_NO_FATAL_FAILURE(addPreEqChannelConfig(cfgs));
-    EXPECT_NO_FATAL_FAILURE(addPreEqBandConfigs(mCfgs));
+    addPreEqChannelConfig(cfgs);
+    addPreEqBandConfigs(mCfgs);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
 TEST_P(DynamicsProcessingTestEqBandConfig, SetAndGetPostEqBandConfig) {
     mEngineConfigPreset.postEqStage.bandCount = mCfgs.size();
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
+    addEngineConfig(mEngineConfigPreset);
     std::vector<DynamicsProcessing::ChannelConfig> cfgs(mChannelCount);
     for (int i = 0; i < mChannelCount; i++) {
         cfgs[i].channel = i;
         cfgs[i].enable = true;
     }
-    EXPECT_NO_FATAL_FAILURE(addPostEqChannelConfig(cfgs));
-    EXPECT_NO_FATAL_FAILURE(addPostEqBandConfigs(mCfgs));
+    addPostEqChannelConfig(cfgs);
+    addPostEqBandConfigs(mCfgs);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
@@ -1185,14 +1185,14 @@
 
 TEST_P(DynamicsProcessingTestMbcBandConfig, SetAndGetMbcBandConfig) {
     mEngineConfigPreset.mbcStage.bandCount = mCfgs.size();
-    EXPECT_NO_FATAL_FAILURE(addEngineConfig(mEngineConfigPreset));
+    addEngineConfig(mEngineConfigPreset);
     std::vector<DynamicsProcessing::ChannelConfig> cfgs(mChannelCount);
     for (int i = 0; i < mChannelCount; i++) {
         cfgs[i].channel = i;
         cfgs[i].enable = true;
     }
-    EXPECT_NO_FATAL_FAILURE(addMbcChannelConfig(cfgs));
-    EXPECT_NO_FATAL_FAILURE(addMbcBandConfigs(mCfgs));
+    addMbcChannelConfig(cfgs);
+    addMbcBandConfigs(mCfgs);
     ASSERT_NO_FATAL_FAILURE(SetAndGetDynamicsProcessingParameters());
 }
 
diff --git a/audio/aidl/vts/VtsHalNSTargetTest.cpp b/audio/aidl/vts/VtsHalNSTargetTest.cpp
index a50e1b4..c5a9bad 100644
--- a/audio/aidl/vts/VtsHalNSTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalNSTargetTest.cpp
@@ -140,12 +140,12 @@
 };
 
 TEST_P(NSParamTest, SetAndGetLevel) {
-    EXPECT_NO_FATAL_FAILURE(addLevelParam(mLevel));
+    addLevelParam(mLevel);
     SetAndGetParameters();
 }
 
 TEST_P(NSParamTest, SetAndGetType) {
-    EXPECT_NO_FATAL_FAILURE(addLevelParam(mLevel));
+    addLevelParam(mLevel);
     SetAndGetParameters();
 }
 
diff --git a/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp b/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp
index a942521..3b07809 100644
--- a/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp
+++ b/audio/aidl/vts/VtsHalVisualizerTargetTest.cpp
@@ -189,22 +189,22 @@
 };
 
 TEST_P(VisualizerParamTest, SetAndGetCaptureSize) {
-    ASSERT_NO_FATAL_FAILURE(addCaptureSizeParam(mCaptureSize));
+    addCaptureSizeParam(mCaptureSize);
     ASSERT_NO_FATAL_FAILURE(SetAndGetParameters());
 }
 
 TEST_P(VisualizerParamTest, SetAndGetScalingMode) {
-    ASSERT_NO_FATAL_FAILURE(addScalingModeParam(mScalingMode));
+    addScalingModeParam(mScalingMode);
     ASSERT_NO_FATAL_FAILURE(SetAndGetParameters());
 }
 
 TEST_P(VisualizerParamTest, SetAndGetMeasurementMode) {
-    ASSERT_NO_FATAL_FAILURE(addMeasurementModeParam(mMeasurementMode));
+    addMeasurementModeParam(mMeasurementMode);
     ASSERT_NO_FATAL_FAILURE(SetAndGetParameters());
 }
 
 TEST_P(VisualizerParamTest, SetAndGetLatency) {
-    ASSERT_NO_FATAL_FAILURE(addLatencyParam(mLatency));
+    addLatencyParam(mLatency);
     ASSERT_NO_FATAL_FAILURE(SetAndGetParameters());
 }
 
@@ -212,10 +212,10 @@
     SKIP_TEST_IF_DATA_UNSUPPORTED(mDescriptor.common.flags);
 
     bool allParamsValid = true;
-    ASSERT_NO_FATAL_FAILURE(addCaptureSizeParam(mCaptureSize));
-    ASSERT_NO_FATAL_FAILURE(addScalingModeParam(mScalingMode));
-    ASSERT_NO_FATAL_FAILURE(addMeasurementModeParam(mMeasurementMode));
-    ASSERT_NO_FATAL_FAILURE(addLatencyParam(mLatency));
+    addCaptureSizeParam(mCaptureSize);
+    addScalingModeParam(mScalingMode);
+    addMeasurementModeParam(mMeasurementMode);
+    addLatencyParam(mLatency);
     ASSERT_NO_FATAL_FAILURE(SetAndGetParameters(&allParamsValid));
 
     Parameter getParam;
@@ -276,9 +276,9 @@
 
     for (float maxAudioSampleValue : testMaxAudioSampleValueList) {
         bool allParamsValid = true;
-        ASSERT_NO_FATAL_FAILURE(addCaptureSizeParam(mCaptureSize));
-        ASSERT_NO_FATAL_FAILURE(addScalingModeParam(mScalingMode));
-        ASSERT_NO_FATAL_FAILURE(addLatencyParam(mLatency));
+        addCaptureSizeParam(mCaptureSize);
+        addScalingModeParam(mScalingMode);
+        addLatencyParam(mLatency);
         ASSERT_NO_FATAL_FAILURE(SetAndGetParameters(&allParamsValid));
 
         generateSineWave(std::vector<int>{1000}, mInputBuffer, maxAudioSampleValue,
diff --git a/audio/policy/1.0/xml/audio_policy_engine_configuration.xsd b/audio/policy/1.0/xml/audio_policy_engine_configuration.xsd
index 02e593a..2b86049 100644
--- a/audio/policy/1.0/xml/audio_policy_engine_configuration.xsd
+++ b/audio/policy/1.0/xml/audio_policy_engine_configuration.xsd
@@ -105,7 +105,7 @@
                         <xs:element name="AttributesGroup" type="AttributesGroup" minOccurs="1" maxOccurs="unbounded"/>
                     </xs:sequence>
                     <xs:attribute name="name" type="xs:string" use="required"/>
-                    <xs:attribute name="id" type="xs:int" use="required"/>
+                    <xs:attribute name="id" type="xs:int" use="optional"/>
                 </xs:complexType>
             </xs:element>
         </xs:sequence>
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl
index e3f8605..465d9d4 100644
--- a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl
@@ -35,33 +35,12 @@
 @JavaDerive(equals=true, toString=true) @RustDerive(Clone=true) @VintfStability
 parcelable VehicleAreaConfig {
   int areaId;
-  /**
-   * @deprecated client should use {@code getMinMaxSupportedValue} instead. Only applicable for {@code INT32} type property. Ignored for other types. The optional minimum value at boot time. For backward compatibility, if {@code HasSupportedValueInfo.hasMinSupportedValue} is {@code true}, and {@code HasSupportedValueInfo.hasMaxSupportedValue} is {@code true}, this must be equal to the min supported value ({@code MinMaxSupportedValueResult.minSupportedValue}) at boot time. If no minimum or maximum value is available at boot time, both {@code minInt32Value} and {@code maxInt32Value} must be set to 0. If either one is not 0, then we assume min and max both take effect.
-   */
   int minInt32Value;
-  /**
-   * @deprecated client should use {@code getMinMaxSupportedValue} instead. Only applicable for {@code INT32} type property. Ignored for other types. The optional maximum value at boot time. For backward compatibility, if {@code HasSupportedValueInfo.hasMinSupportedValue} is {@code true}, and {@code HasSupportedValueInfo.hasMaxSupportedValue} is {@code true}, this must be equal to the max supported value ({@code MinMaxSupportedValueResult.maxSupportedValue}) at boot time. If no minimum or maximum value is available at boot time, both {@code minInt32Value} and {@code maxInt32Value} must be set to 0. If either one is not 0, then we assume min and max both take effect.
-   */
   int maxInt32Value;
-  /**
-   * @deprecated client should use {@code getMinMaxSupportedValue} instead. Only applicable for {@code INT64} type property. Ignored for other types. The optional minimum value at boot time. For backward compatibility, if {@code HasSupportedValueInfo.hasMinSupportedValue} is {@code true}, and {@code HasSupportedValueInfo.hasMaxSupportedValue} is {@code true}, this must be equal to the min supported value ({@code MinMaxSupportedValueResult.minSupportedValue}) at boot time. If no minimum or maximum value is available at boot time, both {@code minInt64Value} and {@code maxInt64Value} must be set to 0. If either one is not 0, then we assume min and max both take effect.
-   */
   long minInt64Value;
-  /**
-   * @deprecated client should use {@code getMinMaxSupportedValue} instead. Only applicable for {@code INT64} type property. Ignored for other types. The optional maximum value at boot time. For backward compatibility, if {@code HasSupportedValueInfo.hasMinSupportedValue} is {@code true}, and {@code HasSupportedValueInfo.hasMaxSupportedValue} is {@code true}, this must be equal to the max supported value ({@code MinMaxSupportedValueResult.maxSupportedValue}) at boot time. If no minimum or maximum value is available at boot time, both {@code minInt64Value} and {@code maxInt64Value} must be set to 0. If either one is not 0, then we assume min and max both take effect.
-   */
   long maxInt64Value;
-  /**
-   * @deprecated client should use {@code getMinMaxSupportedValue} instead. Only applicable for {@code FLOAT} type property. Ignored for other types. The optional minimum value at boot time. For backward compatibility, if {@code HasSupportedValueInfo.hasMinSupportedValue} is {@code true}, and {@code HasSupportedValueInfo.hasMaxSupportedValue} is {@code true}, this must be equal to the min supported value ({@code MinMaxSupportedValueResult.minSupportedValue}) at boot time. If no minimum or maximum value is available at boot time, both {@code minFloatValue} and {@code maxFloatValue} must be set to 0. If either one is not 0, then we assume min and max both take effect.
-   */
   float minFloatValue;
-  /**
-   * @deprecated client should use {@code getMinMaxSupportedValue} instead. Only applicable for {@code FLOAT} type property. Ignored for other types. The optional maximum value at boot time. For backward compatibility, if {@code HasSupportedValueInfo.hasMinSupportedValue} is {@code true}, and {@code HasSupportedValueInfo.hasMaxSupportedValue} is {@code true}, this must be equal to the max supported value ({@code MinMaxSupportedValueResult.maxSupportedValue}) at boot time. If no minimum or maximum value is available at boot time, both {@code minFloatValue} and {@code maxFloatValue} must be set to 0. If either one is not 0, then we assume min and max both take effect.
-   */
   float maxFloatValue;
-  /**
-   * @deprecated client should use {@code getMinMaxSupportedValue} instead. Only applicable for property with {@code @data_enum} annotation. Ignored for other properties. Optional supported subset of supported values at boot time. If the property has a @data_enum and supportedEnumValues is {@code null}, then it is assumed all @data_enum values are supported unless specified through another mechanism. For backward compatibility, if {@code HasSupportedValueInfo.hasSupportedValuesList} is {@code true} and this property has {@code data_enum} annotation, this must be set to the same as {@code SupportedValuesListResult.supportedValuesList} at boot time.
-   */
   @nullable long[] supportedEnumValues;
   android.hardware.automotive.vehicle.VehiclePropertyAccess access = android.hardware.automotive.vehicle.VehiclePropertyAccess.NONE;
   boolean supportVariableUpdateRate;
diff --git a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl
index c6b8cd1..1720628 100644
--- a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleAreaConfig.aidl
@@ -29,7 +29,7 @@
     int areaId;
 
     /**
-     * @deprecated client should use {@code getMinMaxSupportedValue} instead.
+     * client should use {@code getMinMaxSupportedValue} instead.
      *
      * Only applicable for {@code INT32} type property. Ignored for other types.
      *
@@ -49,7 +49,7 @@
     int minInt32Value;
 
     /**
-     * @deprecated client should use {@code getMinMaxSupportedValue} instead.
+     * client should use {@code getMinMaxSupportedValue} instead.
      *
      * Only applicable for {@code INT32} type property. Ignored for other types.
      *
@@ -69,7 +69,7 @@
     int maxInt32Value;
 
     /**
-     * @deprecated client should use {@code getMinMaxSupportedValue} instead.
+     * client should use {@code getMinMaxSupportedValue} instead.
      *
      * Only applicable for {@code INT64} type property. Ignored for other types.
      *
@@ -89,7 +89,7 @@
     long minInt64Value;
 
     /**
-     * @deprecated client should use {@code getMinMaxSupportedValue} instead.
+     * client should use {@code getMinMaxSupportedValue} instead.
      *
      * Only applicable for {@code INT64} type property. Ignored for other types.
      *
@@ -109,7 +109,7 @@
     long maxInt64Value;
 
     /**
-     * @deprecated client should use {@code getMinMaxSupportedValue} instead.
+     * client should use {@code getMinMaxSupportedValue} instead.
      *
      * Only applicable for {@code FLOAT} type property. Ignored for other types.
      *
@@ -129,7 +129,7 @@
     float minFloatValue;
 
     /**
-     * @deprecated client should use {@code getMinMaxSupportedValue} instead.
+     * client should use {@code getMinMaxSupportedValue} instead.
      *
      * Only applicable for {@code FLOAT} type property. Ignored for other types.
      *
@@ -149,7 +149,7 @@
     float maxFloatValue;
 
     /**
-     * @deprecated client should use {@code getMinMaxSupportedValue} instead.
+     * client should use {@code getMinMaxSupportedValue} instead.
      *
      * Only applicable for property with {@code @data_enum} annotation. Ignored
      * for other properties.
diff --git a/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json b/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
index b774580..da73b03 100644
--- a/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
+++ b/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
@@ -218,7 +218,7 @@
             {
                 "name": "Tire pressure",
                 "value": 392168201,
-                "description": "Tire pressure\nEach tire is identified by its areaConfig.areaId config and its minFloatValue\/maxFloatValue are used to store OEM recommended pressure range.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue in the areaConfig data represents the lower bound of the recommended tire pressure.\nThe maxFloatValue in the areaConfig data represents the upper bound of the recommended tire pressure.\nFor example:\nThe following areaConfig indicates the recommended tire pressure of the left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL. .areaConfigs = { VehicleAreaConfig { .areaId = VehicleAreaWheel::LEFT_FRONT, .minFloatValue = 200.0, .maxFloatValue = 240.0, } }\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:\n{@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.\n{@code MinMaxSupportedValueResult.minSupportedValue} represents the lower bound of the recommended tire pressure for the tire at the specified area ID.\n{@code MinMaxSupportedValueResult.maxSupportedValue} represents the upper bound of the recommended tire pressure for the tire at the specified area ID.\nFor example, if the recommended tire pressure of left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL, {@code getMinMaxSupportedValue} for [propId=TIRE_PRESSURE, areaId=VehicleAreaWheel::LEFT_FRONT] must return a {@code MinMaxSupportedValueResult} with OK status, 200.0 as minSupportedValue, 240.0 as maxSupportedValue.\nAt boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to maxSupportedValue."
+                "description": "Tire pressure\nEach tire is identified by its areaConfig.areaId config and its minFloatValue\/maxFloatValue are used to store OEM recommended pressure range.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue in the areaConfig data represents the lower bound of the recommended tire pressure.\nThe maxFloatValue in the areaConfig data represents the upper bound of the recommended tire pressure.\nFor example:\nThe following areaConfig indicates the recommended tire pressure of the left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL. .areaConfigs = { VehicleAreaConfig { .areaId = VehicleAreaWheel::LEFT_FRONT, .minFloatValue = 200.0, .maxFloatValue = 240.0, } }\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue. For example, if the recommended tire pressure of left_front tire is from 200.0 KILOPASCAL to 240.0 KILOPASCAL, {@code getMinMaxSupportedValue} for [propId=TIRE_PRESSURE, areaId=VehicleAreaWheel::LEFT_FRONT] must return a {@code MinMaxSupportedValueResult} with OK status, 200.0 as minSupportedValue, 240.0 as maxSupportedValue. At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to maxSupportedValue."
             },
             {
                 "name": "Critically low tire pressure",
@@ -262,7 +262,7 @@
                     "ImpactSensorLocation"
                 ],
                 "data_enum": "ImpactSensorLocation",
-                "description": "Impact detected.\nBit flag property to relay information on whether an impact has occurred on a particular side of the vehicle as described through the ImpactSensorLocation enum. As a bit flag property, this property can be set to multiple ORed together values of the enum when necessary.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all bit flags of ImpactSensorLocation are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):\n{@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all bit flags of ImpactSensorLocation are supported.\nAt boot, supportedEnumValues is equal to the supported values list."
+                "description": "Impact detected.\nBit flag property to relay information on whether an impact has occurred on a particular side of the vehicle as described through the ImpactSensorLocation enum. As a bit flag property, this property can be set to multiple ORed together values of the enum when necessary.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all bit flags of ImpactSensorLocation are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all bit flags of ImpactSensorLocation are supported. At boot, supportedEnumValues is equal to the supported values list."
             },
             {
                 "name": "Vehicle horn engaged.",
@@ -276,7 +276,7 @@
                     "VehicleGear"
                 ],
                 "data_enum": "VehicleGear",
-                "description": "Currently selected gear\nThis is the gear selected by the user.\nValues in the config array must represent the list of supported gears for this vehicle at boot time. For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}\nIn the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), GEAR_SELECTION's value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):\n{@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}.\n{@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}.\nThe supportedValues must represent the list of supported gears for this vehicle. For example, for an automatic transmission, the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission it can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}.\nIn the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), the GEAR_SELECTION property value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE.\nAt boot, the config array's values are equal to the supported values list."
+                "description": "Currently selected gear\nThis is the gear selected by the user.\nValues in the config array must represent the list of supported gears for this vehicle at boot time. For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}\nIn the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), GEAR_SELECTION's value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}. The supportedValues must represent the list of supported gears for this vehicle. For example, for an automatic transmission, the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission it can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. In the case of an automatic transmission vehicle that allows the driver to select specific gears on demand (i.e. \"manual mode\"), the GEAR_SELECTION property value must be set to the specific gear selected by the driver instead of simply GEAR_DRIVE. At boot, the config array's values are equal to the supported values list."
             },
             {
                 "name": "CURRENT_GEAR",
@@ -285,7 +285,7 @@
                     "VehicleGear"
                 ],
                 "data_enum": "VehicleGear",
-                "description": "Current gear. In non-manual case, selected gear may not match the current gear. For example, if the selected gear is GEAR_DRIVE, the current gear will be one of GEAR_1, GEAR_2 etc, which reflects the actual gear the transmission is currently running in.\nValues in the config array must represent the list of supported gears for this vehicle at boot time.  For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):\n{@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}.\n{@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}.\nThe supported values list must represent the list of supported gears for this vehicle.  For example, for an automatic transmission, this list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION.\nAt boot, the config array's values are equal to the supported values list."
+                "description": "Current gear. In non-manual case, selected gear may not match the current gear. For example, if the selected gear is GEAR_DRIVE, the current gear will be one of GEAR_1, GEAR_2 etc, which reflects the actual gear the transmission is currently running in.\nValues in the config array must represent the list of supported gears for this vehicle at boot time.  For example, config array for an automatic transmission must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list must contain {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}. The supported values list must represent the list of supported gears for this vehicle.  For example, for an automatic transmission, this list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...} and for manual transmission the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the same as that of the supported gears reported in GEAR_SELECTION. At boot, the config array's values are equal to the supported values list."
             },
             {
                 "name": "Parking brake state.",
@@ -300,7 +300,7 @@
             {
                 "name": "EV_BRAKE_REGENERATION_LEVEL",
                 "value": 289408012,
-                "description": "Regenerative braking level of a electronic vehicle\nThe minInt32Value and maxInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the setting for no regenerative braking, must be 0.\nThe maxInt32Value indicates the setting for the maximum amount of energy regenerated from braking.\nAll values between min and max supported value must be supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):\n{@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for global area ID(0)\n{@code MinMaxSupportedValueResult.minSupportedValue} must be 0.\n{@code MinMaxSupportedValueResult.maxSupportedValue} indicates the setting for the maximum amount of energy regenerated from braking. The minSupportedValue indicates the setting for no regenerative braking.\nAt boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\n\nThis property is a more granular form of EV_REGENERATIVE_BRAKING_STATE. It allows the user to set a more specific level of regenerative braking if the states in EvRegenerativeBrakingState are not granular enough for the OEM.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Regenerative braking level of a electronic vehicle\nThe minInt32Value and maxInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the setting for no regenerative braking, must be 0.\nThe maxInt32Value indicates the setting for the maximum amount of energy regenerated from braking.\nAll values between min and max supported value must be supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for global area ID(0) {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is a more granular form of EV_REGENERATIVE_BRAKING_STATE. It allows the user to set a more specific level of regenerative braking if the states in EvRegenerativeBrakingState are not granular enough for the OEM.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Warning for fuel low level.",
@@ -347,7 +347,7 @@
                     "EvStoppingMode"
                 ],
                 "data_enum": "EvStoppingMode",
-                "description": "Represents property for the current stopping mode of the vehicle.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of EvStoppingMode are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):\nFor the global area ID (0), {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all enum values of EvStoppingMode are supported.\nAt boot, supportedEnumValues is equal to the supported values list.\n\nThe EvStoppingMode enum may be extended to include more states in the future.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for the current stopping mode of the vehicle.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of EvStoppingMode are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): For the global area ID (0), {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all enum values of EvStoppingMode are supported. At boot, supportedEnumValues is equal to the supported values list.\nThe EvStoppingMode enum may be extended to include more states in the future.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "ELECTRONIC_STABILITY_CONTROL_ENABLED",
@@ -362,7 +362,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "ElectronicStabilityControlState",
-                "description": "Electronic Stability Control (ESC) state.\nReturns the current state of ESC. This property must always return a valid state defined in ElectronicStabilityControlState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ElectronicStabilityControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):\nFor the global area ID (0), {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all states of both ElectronicStabilityControlState (including OTHER, which is not recommended) and ErrorState are supported.\nAt boot, supportedEnumValues is equal to the supported values list."
+                "description": "Electronic Stability Control (ESC) state.\nReturns the current state of ESC. This property must always return a valid state defined in ElectronicStabilityControlState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ElectronicStabilityControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): For the global area ID (0), {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains supported values unless all states of both ElectronicStabilityControlState (including OTHER, which is not recommended) and ErrorState are supported. At boot, supportedEnumValues is equal to the supported values list."
             },
             {
                 "name": "Turn signal light state.",
@@ -385,7 +385,7 @@
             {
                 "name": "Fan speed setting",
                 "value": 356517120,
-                "description": "Fan speed setting\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lowest fan speed. The maxInt32Value indicates the highest fan speed.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:\n{@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific area ID.\n{@code MinMaxSupportedValueResult.minSupportedValue} indicates the lowest fan speed.\n{@code MinMaxSupportedValueResult.maxSupportedValue} indicates the highest fan speed.\nAll integers between minSupportedValue and maxSupportedValue must be supported.\nAt boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\n\nThis property is not in any particular unit but in a specified range of relative speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Fan speed setting\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lowest fan speed.\nThe maxInt32Value indicates the highest fan speed.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Fan direction setting",
@@ -404,7 +404,7 @@
             {
                 "name": "HVAC_TEMPERATURE_SET",
                 "value": 358614275,
-                "description": "HVAC target temperature set in Celsius.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue indicates the minimum temperature setting in Celsius. The maxFloatValue indicates the maximum temperature setting in Celsius.\nIf all the values between minFloatValue and maxFloatValue are not supported, the configArray can be used to list the valid temperature values that can be set. It also describes a lookup table to convert the temperature from Celsius to Fahrenheit and vice versa for this vehicle. The configArray must be defined if standard unit conversion is not supported on this vehicle.\nThe configArray is set as follows: configArray[0] = [the lower bound of the supported temperature in Celsius] * 10. configArray[1] = [the upper bound of the supported temperature in Celsius] * 10. configArray[2] = [the increment in Celsius] * 10. configArray[3] = [the lower bound of the supported temperature in Fahrenheit] * 10. configArray[4] = [the upper bound of the supported temperature in Fahrenheit] * 10. configArray[5] = [the increment in Fahrenheit] * 10.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be equal to configArray[0] and configArray[1] respectively.\nFor example, if the vehicle supports temperature values as: [16.0, 16.5, 17.0 ,..., 28.0] in Celsius [60.5, 61.5, 62.5 ,..., 84.5] in Fahrenheit The configArray should be configArray = {160, 280, 5, 605, 845, 10}.\nIdeally, the ratio of the Celsius increment to the Fahrenheit increment should be as close to the actual ratio of 1 degree Celsius to 1.8 degrees Fahrenheit.\nThere must be a one to one mapping of all Celsius values to Fahrenheit values defined by the configArray. The configArray will be used by clients to convert this property's temperature from Celsius to Fahrenheit. Also, it will let clients know what Celsius value to set the property to achieve their desired Fahreneheit value for the system. If the ECU does not have a one to one mapping of all Celsius values to Fahrenheit values, then the config array should only define the list of Celsius and Fahrenheit values that do have a one to one mapping.\nFor example, if the ECU supports Celsius values from 16 to 28 and Fahrenheit values from 60 to 85 both with an increment of 1, then one possible configArray would be {160, 280, 10, 600, 840, 20}. In this case, 85 would not be a supported temperature.\nAny value set in between a valid value should be rounded to the closest valid value.\nIt is highly recommended that the OEM also implement the HVAC_TEMPERATURE_VALUE_SUGGESTION vehicle property because it provides applications a simple method for determining temperature values that can be set for this vehicle and for converting values between Celsius and Fahrenheit.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "HVAC target temperature set in Celsius.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.\nThe minFloatValue indicates the minimum temperature setting in Celsius.\nThe maxFloatValue indicates the maximum temperature setting in Celsius.\nIf all the values between minFloatValue and maxFloatValue are not supported, the configArray can be used to list the valid temperature values that can be set. It also describes a lookup table to convert the temperature from Celsius to Fahrenheit and vice versa for this vehicle. The configArray must be defined if standard unit conversion is not supported on this vehicle.\nThe configArray is set as follows: configArray[0] = [the lower bound of the supported temperature in Celsius] * 10. configArray[1] = [the upper bound of the supported temperature in Celsius] * 10. configArray[2] = [the increment in Celsius] * 10. configArray[3] = [the lower bound of the supported temperature in Fahrenheit] * 10. configArray[4] = [the upper bound of the supported temperature in Fahrenheit] * 10. configArray[5] = [the increment in Fahrenheit] * 10.\nThe minFloatValue and maxFloatValue in VehicleAreaConfig must be equal to configArray[0] and configArray[1] respectively.\nFor example, if the vehicle supports temperature values as: [16.0, 16.5, 17.0 ,..., 28.0] in Celsius [60.5, 61.5, 62.5 ,..., 84.5] in Fahrenheit The configArray should be configArray = {160, 280, 5, 605, 845, 10}.\nIdeally, the ratio of the Celsius increment to the Fahrenheit increment should be as close to the actual ratio of 1 degree Celsius to 1.8 degrees Fahrenheit.\nThere must be a one to one mapping of all Celsius values to Fahrenheit values defined by the configArray. The configArray will be used by clients to convert this property's temperature from Celsius to Fahrenheit. Also, it will let clients know what Celsius value to set the property to achieve their desired Fahreneheit value for the system. If the ECU does not have a one to one mapping of all Celsius values to Fahrenheit values, then the config array should only define the list of Celsius and Fahrenheit values that do have a one to one mapping.\nFor example, if the ECU supports Celsius values from 16 to 28 and Fahrenheit values from 60 to 85 both with an increment of 1, then one possible configArray would be {160, 280, 10, 600, 840, 20}. In this case, 85 would not be a supported temperature.\nAny value set in between a valid value should be rounded to the closest valid value.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue. If not all the values between minSupportedValue and maxSupportedValue are supported, {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the specified area ID. At boot, supportedValuesList must be equal to what is described in config array. At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to maxSupportedValue.\nIt is highly recommended that the OEM also implement the HVAC_TEMPERATURE_VALUE_SUGGESTION vehicle property because it provides applications a simple method for determining temperature values that can be set for this vehicle and for converting values between Celsius and Fahrenheit.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "HVAC_DEFROSTER",
@@ -444,17 +444,17 @@
             {
                 "name": "Seat heating\/cooling",
                 "value": 356517131,
-                "description": "Seat heating\/cooling\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the maximum seat temperature heating setting. The minInt32Value must be 0, unless the vehicle supports seat cooling as well. In this case, minInt32Value indicates the maximum seat temperature cooling setting.\nThis property is not in any particular unit, but in a specified range of relative temperature settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat heating\/cooling\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value must be 0, unless the vehicle supports seat cooling as well. In this case, minInt32Value indicates the maximum seat temperature cooling setting.\nThe maxInt32Value indicates the maximum seat temperature heating setting.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit, but in a specified range of relative temperature settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Side Mirror Heat",
                 "value": 339739916,
-                "description": "Side Mirror Heat\nIncreasing values denote higher heating levels for side mirrors.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value in the config data represents the maximum heating level. The minInt32Value in the config data MUST be zero and indicates no heating.\nThis property is not in any particular unit but in a specified range of relative heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Side Mirror Heat\nIncreasing values denote higher heating levels for side mirrors.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value in the config data MUST be zero and indicates no heating.\nThe maxInt32Value in the config data represents the maximum heating level.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering Wheel Heating\/Cooling",
                 "value": 289408269,
-                "description": "Steering Wheel Heating\/Cooling\nSets the amount of heating\/cooling for the steering wheel.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the maximum steering wheel heating setting. The minInt32Value should be 0, unless the vehicle supports steering wheel cooling as well. In such a case, the minInt32Value indicates the maximum steering wheel cooling setting.\nThis property is not in any particular unit but in a specified range of heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering Wheel Heating\/Cooling\nSets the amount of heating\/cooling for the steering wheel.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value should be 0, unless the vehicle supports steering wheel cooling as well. In such a case, the minInt32Value indicates the maximum steering wheel cooling setting.\nThe maxInt32Value indicates the maximum steering wheel heating setting.\nIf {@code HasSupportedValueInfo} is not null for the global area ID (0): {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of heating settings.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Temperature units for display",
@@ -463,7 +463,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Temperature units for display\nIndicates whether the vehicle is displaying temperature to the user as Celsius or Fahrenheit. VehiclePropConfig.configArray is used to indicate the supported temperature display units. For example: configArray[0] = CELSIUS configArray[1] = FAHRENHEIT\nThis parameter MAY be used for displaying any HVAC temperature in the system. Values must be one of VehicleUnit.CELSIUS or VehicleUnit.FAHRENHEIT Note that internally, all temperatures are represented in floating point Celsius.\nIf updating HVAC_TEMPERATURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Temperature units for display\nIndicates whether the vehicle is displaying temperature to the user as Celsius or Fahrenheit.\nVehiclePropConfig.configArray is used to indicate the supported temperature display units.\nFor example: configArray[0] = CELSIUS configArray[1] = FAHRENHEIT\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [HVAC_TEMPERATURE_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [CELSIUS, FAHRENHEIT]. At boot, the values in the config array are equal to the supported values list.\nThis parameter MAY be used for displaying any HVAC temperature in the system. Values must be one of VehicleUnit.CELSIUS or VehicleUnit.FAHRENHEIT Note that internally, all temperatures are represented in floating point Celsius.\nIf updating HVAC_TEMPERATURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Actual fan speed",
@@ -492,7 +492,7 @@
             {
                 "name": "Seat ventilation",
                 "value": 356517139,
-                "description": "Seat ventilation\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value must be 0. The maxInt32Value indicates the maximum ventilation setting available for the seat.\nThis property is not in any particular unit but in the specified range of ventilation settings.\nUsed by HVAC apps and Assistant to enable, change, or read state of seat ventilation.  This is different than seating cooling. It can be on at the same time as cooling, or not.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat ventilation\nThe minInt32Value and maxInt32Value in VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value must be 0.\nThe maxInt32Value indicates the maximum ventilation setting available for the seat.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in the specified range of ventilation settings.\nUsed by HVAC apps and Assistant to enable, change, or read state of seat ventilation.  This is different than seating cooling. It can be on at the same time as cooling, or not.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Electric defrosters' status",
@@ -511,7 +511,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Distance units for display\nIndicates which units the car is using to display distances to the user. Eg. Mile, Meter Kilometer.\nDistance units are defined in VehicleUnit. VehiclePropConfig.configArray is used to indicate the supported distance display units. For example: configArray[0] = METER configArray[1] = KILOMETER configArray[2] = MILE\nIf updating DISTANCE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Distance units for display\nIndicates which units the car is using to display distances to the user. Eg. Mile, Meter Kilometer.\nDistance units are defined in VehicleUnit. VehiclePropConfig.configArray is used to indicate the supported distance display units. For example: configArray[0] = METER configArray[1] = KILOMETER configArray[2] = MILE\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [DISTANCE_DISPLAY_UNITS, areaId=0] must returns a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [METER, KILOMETER, MILE]. At boot, the values in the config array are equal to the supported values list.\nIf updating DISTANCE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Fuel volume units for display",
@@ -520,7 +520,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Fuel volume units for display\nIndicates which units the car is using to display fuel volume to the user. Eg. Liter or Gallon.\nVehiclePropConfig.configArray is used to indicate the supported fuel volume display units. Volume units are defined in VehicleUnit. For example: configArray[0] = LITER configArray[1] = GALLON\nIf updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Fuel volume units for display\nIndicates which units the car is using to display fuel volume to the user. Eg. Liter or Gallon.\nVehiclePropConfig.configArray is used to indicate the supported fuel volume display units. Volume units are defined in VehicleUnit. For example: configArray[0] = LITER configArray[1] = GALLON\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [FUEL_VOLUME_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [LITER, GALLON]. At boot, the values in the config array are equal to the supported values list.\nIf updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "TIRE_PRESSURE_DISPLAY_UNITS",
@@ -529,7 +529,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Tire pressure units for display\nIndicates which units the car is using to display tire pressure to the user. Eg. PSI, Bar or Kilopascal.\nVehiclePropConfig.configArray is used to indicate the supported pressure display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = KILOPASCAL configArray[1] = PSI configArray[2] = BAR\nIf updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Tire pressure units for display\nIndicates which units the car is using to display tire pressure to the user. Eg. PSI, Bar or Kilopascal.\nVehiclePropConfig.configArray is used to indicate the supported pressure display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = KILOPASCAL configArray[1] = PSI configArray[2] = BAR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [TIRE_PRESSURE_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [KILOPASCAL, PSI, BAR]. At boot, the values in the config array are equal to the supported values list.\nIf updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "EV battery units for display",
@@ -538,7 +538,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "EV battery units for display\nIndicates which units the car is using to display EV battery information to the user. Eg. watt-hours(Wh), kilowatt-hours(kWh) or ampere-hours(Ah).\nVehiclePropConfig.configArray is used to indicate the supported electrical energy units. Electrical energy units are defined in VehicleUnit. For example: configArray[0] = WATT_HOUR configArray[1] = AMPERE_HOURS configArray[2] = KILOWATT_HOUR\nIf updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "EV battery units for display\nIndicates which units the car is using to display EV battery information to the user. Eg. watt-hours(Wh), kilowatt-hours(kWh) or ampere-hours(Ah).\nVehiclePropConfig.configArray is used to indicate the supported electrical energy units. Electrical energy units are defined in VehicleUnit. For example: configArray[0] = WATT_HOUR configArray[1] = AMPERE_HOURS configArray[2] = KILOWATT_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [EV_BATTERY_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [WATT_HOUR, AMPERE_HOURS, KILOWATT_HOUR]. At boot, the values in the config array are equal to the supported values list.\nIf updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME",
@@ -552,7 +552,7 @@
                     "VehicleUnit"
                 ],
                 "data_enum": "VehicleUnit",
-                "description": "Speed units for display\nIndicates type of units the car is using to display speed to user. Eg. m\/s, km\/h, or mph.\nVehiclePropConfig.configArray is used to indicate the supported speed display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = METER_PER_SEC configArray[1] = MILES_PER_HOUR configArray[2] = KILOMETERS_PER_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):\n{@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}.\n{@code getSupportedValuesLists} for [VEHICLE_SPEED_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [METER_PER_SEC, MILES_PER_HOUR, KILOMETERS_PER_HOUR].\nAt boot, the values in the config array are equal to the supported values list.\n\nIf updating VEHICLE_SPEED_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Speed units for display\nIndicates type of units the car is using to display speed to user. Eg. m\/s, km\/h, or mph.\nVehiclePropConfig.configArray is used to indicate the supported speed display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = METER_PER_SEC configArray[1] = MILES_PER_HOUR configArray[2] = KILOMETERS_PER_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [VEHICLE_SPEED_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [METER_PER_SEC, MILES_PER_HOUR, KILOMETERS_PER_HOUR]. At boot, the values in the config array are equal to the supported values list.\nIf updating VEHICLE_SPEED_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "EXTERNAL_CAR_TIME",
@@ -645,12 +645,12 @@
             {
                 "name": "Door position",
                 "value": 373295872,
-                "description": "Door position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the door is closed. The minInt32Value must be 0. The maxInt32Value indicates the door is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nSome vehicles (minivans) can open the door electronically. Hence, the ability to write this property.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Door position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the door is closed. The minInt32Value must be 0.\nThe maxInt32Value indicates the door is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nSome vehicles (minivans) can open the door electronically. Hence, the ability to write this property.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Door move",
                 "value": 373295873,
-                "description": "Door move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the door while opening. The minInt32Value represents the maximum movement speed of the door while closing.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Door move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the door while closing.\nThe maxInt32Value represents the maximum movement speed of the door while opening.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Door lock",
@@ -665,22 +665,22 @@
             {
                 "name": "Mirror Z Position",
                 "value": 339741504,
-                "description": "Mirror Z Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely downwards. This must be a non-positive value. The maxInt32Value indicates the mirror is tilted completely upwards. This must be a non-negative value. 0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the fully downward and fully upwards positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Z Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely downwards. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely upwards. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the fully downward and fully upwards positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Z Move",
                 "value": 339741505,
-                "description": "Mirror Z Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting upwards. The minInt32Value represents the maximum movement speed of the mirror while tilting downwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Z Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting downwards.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Y Position",
                 "value": 339741506,
-                "description": "Mirror Y Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely to the left. This must be a non-positive value. The maxInt32Value indicates the mirror is tilted completely to the right. This must be a non-negative value. 0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the left extreme and right extreme positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Y Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely to the left. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely to the right. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the left extreme and right extreme positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Y Move",
                 "value": 339741507,
-                "description": "Mirror Y Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting right. The minInt32Value represents the maximum movement speed of the mirror while tilting left.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Mirror Y Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting left.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting right.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Mirror Lock",
@@ -705,12 +705,12 @@
             {
                 "name": "Seat memory select",
                 "value": 356518784,
-                "description": "Seat memory select\nThis parameter selects the memory preset to use to select the seat position. The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported. The minInt32Value is always 0, and the maxInt32Value determines the number of seat preset memory slots available (i.e. numSeatPresets - 1).\nFor instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When the user wants to select a preset, the desired preset number (0, 1, or 2) is set."
+                "description": "Seat memory select\nThis parameter selects the memory preset to use to select the seat position.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value is always 0, and the maxInt32Value determines the number of seat preset memory slots available (i.e. numSeatPresets - 1).\nFor instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When the user wants to select a preset, the desired preset number (0, 1, or 2) is set.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
             },
             {
                 "name": "Seat memory set",
                 "value": 356518785,
-                "description": "Seat memory set\nThis setting allows the user to save the current seat position settings into the selected preset slot. The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The minInt32Value must be 0, and the maxInt32Value for each seat position must match the maxInt32Value for SEAT_MEMORY_SELECT."
+                "description": "Seat memory set\nThis setting allows the user to save the current seat position settings into the selected preset slot.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value must be 0, and the maxInt32Value for each seat position must match the maxInt32Value for SEAT_MEMORY_SELECT.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
             },
             {
                 "name": "Seatbelt buckled",
@@ -720,92 +720,92 @@
             {
                 "name": "Seatbelt height position",
                 "value": 356518787,
-                "description": "Seatbelt height position\nAdjusts the shoulder belt anchor point.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat belt's shoulder anchor is at its lowest position. The maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seatbelt height position\nAdjusts the shoulder belt anchor point.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat belt's shoulder anchor is at its lowest position.\nThe maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the lowest and highest positions. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seatbelt height move",
                 "value": 356518788,
-                "description": "Seatbelt height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving upwards. The minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving downwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat belt reaches the positional limit, the value must reset to 0. If SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seatbelt height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving downwards.\nThe maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat belt reaches the positional limit, the value must reset to 0. If SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat fore\/aft position",
                 "value": 356518789,
-                "description": "Seat fore\/aft position\nSets the seat position forward and backwards.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is at its rearward-most linear position. The maxInt32Value indicates the seat is at its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and farthest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat fore\/aft position\nSets the seat position forward and backwards.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is at its rearward-most linear position.\nThe maxInt32Value indicates the seat is at its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and farthest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat fore\/aft move",
                 "value": 356518790,
-                "description": "Seat fore\/aft move\nThis property moves the entire seat forward\/backward in the direction that it is facing.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat while moving forward. The minInt32Value represents the maximum movement speed of the seat while moving backward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat fore\/aft move\nThis property moves the entire seat forward\/backward in the direction that it is facing.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 1 position",
                 "value": 356518791,
-                "description": "Seat backrest angle 1 position\nBackrest angle 1 is the actuator closest to the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the actuator at the bottom of the seat. The maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the actuator at the bottom of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 1 position\nBackrest angle 1 is the actuator closest to the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the actuator at the bottom of the seat.\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the actuator at the bottom of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 1 move",
                 "value": 356518792,
-                "description": "Seat backrest angle 1 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward. The minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 1 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 2 position",
                 "value": 356518793,
-                "description": "Seat backrest angle 2 position\nBackrest angle 2 is the next actuator up from the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the next actuator in the backrest from the one at the bottom of the seat (see SEAT_BACKREST_ANGLE_1_POS for additional details). The maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the next actuator in the backrest from the one at the bottom of the seat(see SEAT_BACKREST_ANGLE_1_POS for additional details).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 2 position\nBackrest angle 2 is the next actuator up from the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the next actuator in the backrest from the one at the bottom of the seat (see SEAT_BACKREST_ANGLE_1_POS for additional details).\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the next actuator in the backrest from the one at the bottom of the seat(see SEAT_BACKREST_ANGLE_1_POS for additional details).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} ihas the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat backrest angle 2 move",
                 "value": 356518794,
-                "description": "Seat backrest angle 2 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward. The minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat backrest angle 2 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat height position",
                 "value": 356518795,
-                "description": "Seat height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its lowest position. The maxInt32Value indicates the seat is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its lowest position.\nThe maxInt32Value indicates the seat is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. position. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat height move",
                 "value": 356518796,
-                "description": "Seat height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat while moving upward. The minInt32Value represents the maximum movement speed of the seat while moving downward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat depth position",
                 "value": 356518797,
-                "description": "Seat depth position\nSets the seat depth, distance from back rest to front edge of seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its shallowest position (i.e. the position with the smallest distance between the front edge of the seat cushion and the rear end of the seat). The maxInt32Value indicates the seat is in its deepest position (i.e. the position with the largest distance between the front edge of the seat cushion and the rear end of the seat).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the shallowest and deepest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat depth position\nSets the seat depth, distance from back rest to front edge of seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its shallowest position (i.e. the position with the smallest distance between the front edge of the seat cushion and the rear end of the seat).\nThe maxInt32Value indicates the seat is in its deepest position (i.e. the position with the largest distance between the front edge of the seat cushion and the rear end of the seat).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the shallowest and deepest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat depth move",
                 "value": 356518798,
-                "description": "Seat depth move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat while getting deeper The minInt32Value represents the maximum movement speed of the seat while getting shallower.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat depth move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while getting shallower.\nThe maxInt32Value represents the maximum movement speed of the seat while getting deeper.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat tilt position",
                 "value": 356518799,
-                "description": "Seat tilt position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat bottom is angled at its lowest angular position. This corresponds to the seat's front edge at its lowest possible position relative to the rear end of the seat. The maxInt32Value indicates the seat bottom is angled at its highest angular position. This corresponds to the seat's front edge at its highest possible position relative to the rear end of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat tilt position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat bottom is angled at its lowest angular position. This corresponds to the seat's front edge at its lowest possible position relative to the rear end of the seat.\nThe maxInt32Value indicates the seat bottom is angled at its highest angular position. This corresponds to the seat's front edge at its highest possible position relative to the rear end of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Seat tilt move",
                 "value": 356518800,
-                "description": "Seat tilt move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the front edge of the seat while moving upward. The minInt32Value represents the maximum movement speed of the front edge of the seat while moving downward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Seat tilt move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the front edge of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the front edge of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumber fore\/aft position",
                 "value": 356518801,
-                "description": "Lumber fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is in its rearward most position (i.e. least supportive position). The maxInt32Value indicates the lumbar support is in its forward most position (i.e. most supportive position).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumber fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is in its rearward most position (i.e. least supportive position).\nThe maxInt32Value indicates the lumbar support is in its forward most position (i.e. most supportive position).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumbar fore\/aft move",
                 "value": 356518802,
-                "description": "Lumbar fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar support while moving forward. The minInt32Value represents the maximum movement speed of the seat's lumbar support while moving backward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumbar fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar support while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar support while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumbar side support position",
                 "value": 356518803,
-                "description": "Lumbar side support position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar side support is in its thinnest position (i.e. most support). The maxInt32Value indicates the lumbar side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumbar side support position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar side support is in its thinnest position (i.e. most support).\nThe maxInt32Value indicates the lumbar side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lumbar side support move",
                 "value": 356518804,
-                "description": "Lumbar side support move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar side support while getting wider. The minInt32Value represents the maximum movement speed of the seat's lumbar side support while getting thinner.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Lumbar side support move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar side support while getting thinner.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar side support while getting wider.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_HEADREST_HEIGHT_POS",
@@ -815,32 +815,32 @@
             {
                 "name": "Headrest height position",
                 "value": 356518820,
-                "description": "Headrest height position\nSets the headrest height for supported seats. VehiclePropConfig.areaConfigs specifies which seats are supported.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its lowest position. The maxInt32Value indicates the headrest is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest height position\nSets the headrest height for supported seats. VehiclePropConfig.areaConfigs specifies which seats are supported.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its lowest position.\nThe maxInt32Value indicates the headrest is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest height move",
                 "value": 356518806,
-                "description": "Headrest height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving up. The minInt32Value represents the maximum movement speed of the seat's headrest while moving down.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving down.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving up.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest angle position",
                 "value": 356518807,
-                "description": "Headrest angle position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its full recline position. The maxInt32Value indicates the headrest is in its most upright\/forward position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and most upright\/forward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest angle position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its full recline position.\nThe maxInt32Value indicates the headrest is in its most upright\/forward position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and most upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest angle move",
                 "value": 356518808,
-                "description": "Headrest angle move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving into an upright\/forward position. The minInt32Value represents the maximum movement speed of the seat's headrest while moving into a shallow position.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest angle move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving into a shallow position.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving into an upright\/forward position.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest fore\/aft position",
                 "value": 356518809,
-                "description": "Headrest fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its rearward-most linear position. The maxInt32Value indicates the headrest is in its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its rearward-most linear position.\nThe maxInt32Value indicates the headrest is in its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Headrest fore\/aft move",
                 "value": 356518810,
-                "description": "Headrest fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving forward. The minInt32Value represents the maximum movement speed of the seat's headrest while moving backward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Headrest fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_FOOTWELL_LIGHTS_STATE",
@@ -849,7 +849,7 @@
                     "VehicleLightState"
                 ],
                 "data_enum": "VehicleLightState",
-                "description": "Represents property for the seat footwell lights state.\nSEAT_FOOTWELL_LIGHTS_STATE reflects the current state of the lights at any point in time. This is different from the function of SEAT_FOOTWELL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, SEAT_FOOTWELL_LIGHTS_STATE may not match the value of SEAT_FOOTWELL_LIGHTS_SWITCH (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported."
+                "description": "Represents property for the seat footwell lights state.\nSEAT_FOOTWELL_LIGHTS_STATE reflects the current state of the lights at any point in time. This is different from the function of SEAT_FOOTWELL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, SEAT_FOOTWELL_LIGHTS_STATE may not match the value of SEAT_FOOTWELL_LIGHTS_SWITCH (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all enum values of VehicleLightState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "SEAT_FOOTWELL_LIGHTS_SWITCH",
@@ -858,7 +858,7 @@
                     "VehicleLightSwitch"
                 ],
                 "data_enum": "VehicleLightSwitch",
-                "description": "Represents property for the seat footwell lights switch.\nSEAT_FOOTWELL_LIGHTS_SWITCH represents the position of the switch controlling the lights. This is different from the function of SEAT_FOOTWELL_LIGHTS_STATE which reflects the current state of the lights at any point in time. Therefore, SEAT_FOOTWELL_LIGHTS_SWITCH may not match the value of SEAT_FOOTWELL_LIGHTS_STATE (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for the seat footwell lights switch.\nSEAT_FOOTWELL_LIGHTS_SWITCH represents the position of the switch controlling the lights. This is different from the function of SEAT_FOOTWELL_LIGHTS_STATE which reflects the current state of the lights at any point in time. Therefore, SEAT_FOOTWELL_LIGHTS_SWITCH may not match the value of SEAT_FOOTWELL_LIGHTS_STATE (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all enum values of VehicleLightSwitch are supported. At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_EASY_ACCESS_ENABLED",
@@ -877,32 +877,32 @@
                     "VehicleAirbagLocation"
                 ],
                 "data_enum": "VehicleAirbagLocation",
-                "description": "Seat airbags deployed\nBit flag property to relay information on which airbags have been deployed in the vehicle at each seat, vs which ones are currently still armed. If SEAT_AIRBAG_ENABLED is set to false at a particular areaId, this property should return status code UNAVAILABLE at that areaId.\nEnums apply to each seat, not the global vehicle. For example, VehicleAirbagsLocation#CURTAIN at the driver seat areaId represents whether the driver side curtain airbag has been deployed. Multiple bit flags can be set to indicate that multiple different airbags have been deployed for the seat.\nFor each seat area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended)."
+                "description": "Seat airbags deployed\nBit flag property to relay information on which airbags have been deployed in the vehicle at each seat, vs which ones are currently still armed. If SEAT_AIRBAG_ENABLED is set to false at a particular areaId, this property should return status code UNAVAILABLE at that areaId.\nEnums apply to each seat, not the global vehicle. For example, VehicleAirbagsLocation#CURTAIN at the driver seat areaId represents whether the driver side curtain airbag has been deployed. Multiple bit flags can be set to indicate that multiple different airbags have been deployed for the seat.\nFor each seat area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "SEAT_CUSHION_SIDE_SUPPORT_POS",
                 "value": 356518815,
-                "description": "Represents property for seat’s hipside (bottom cushion’s side) support position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the seat cushion side support is in its widest position (i.e. least support). The minInt32Value indicates the seat cushion side support is in its thinnest position (i.e. most support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for seat’s hipside (bottom cushion’s side) support position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat cushion side support is in its thinnest position (i.e. most support).\nThe maxInt32Value indicates the seat cushion side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_CUSHION_SIDE_SUPPORT_MOVE",
                 "value": 356518816,
-                "description": "Represents property for movement direction and speed of seat cushion side support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat cushion side support when growing wider (i.e. support is decreasing). The minInt32Value represents the maximum movement speed of the seat cushion side support when growing thinner (i.e. support is increasing).\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_CUSHION_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for movement direction and speed of seat cushion side support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat cushion side support when growing thinner (i.e. support is increasing).\nThe maxInt32Value represents the maximum movement speed of the seat cushion side support when growing wider (i.e. support is decreasing).\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_CUSHION_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_LUMBAR_VERTICAL_POS",
                 "value": 356518817,
-                "description": "Represents property for seat’s lumbar support vertical position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the lumbar support's highest position. The minInt32Value indicates the lumbar support's lowest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for seat’s lumbar support vertical position.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support's lowest position.\nThe maxInt32Value indicates the lumbar support's highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_LUMBAR_VERTICAL_MOVE",
                 "value": 356518818,
-                "description": "Represents property for vertical movement direction and speed of seat lumbar support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the lumbar support is moving at the fastest upward speed. The minInt32Value indicates the lumbar support is moving at the fastest downward speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_VERTICAL_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property for vertical movement direction and speed of seat lumbar support.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is moving at the fastest downward speed.\nThe maxInt32Value indicates the lumbar support is moving at the fastest upward speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat cushion side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_VERTICAL_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_WALK_IN_POS",
                 "value": 356518819,
-                "description": "Represents property that indicates the current walk-in position of the seat.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the normal seat position. The minInt32Value must be 0. The maxInt32Value indicates the seat is in the full walk-in position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the normal and walk-in positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat that actually moves when the walk-in feature activates, not the intended seat the passengers will sit in.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Represents property that indicates the current walk-in position of the seat.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the normal seat position. The minInt32Value must be 0.\nThe maxInt32Value indicates the seat is in the full walk-in position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the normal and walk-in positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat that actually moves when the walk-in feature activates, not the intended seat the passengers will sit in.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SEAT_BELT_PRETENSIONER_DEPLOYED",
@@ -921,12 +921,12 @@
             {
                 "name": "Window Position",
                 "value": 322964416,
-                "description": "Window Position\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the window is closed\/fully open out of plane. If the window cannot open out of plane, then minInt32Value is the position of the window when fully closed and must be 0. If the window can open out of plane, the minInt32Value indicates the window is fully open in its position out of plane and will be a negative value. See the example below for a more detailed explanation. The maxInt32Value indicates the window is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed\/fully open out-of-plane and fully open positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nFor example, this is how the property should work for a window that can move out of plane: For a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work with negative values as follows: Max = sunroof completely open 0 = sunroof closed. Min = sunroof vent completely open\nNote that in this mode, 0 indicates the window is closed.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Window Position\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the window is closed\/fully open out of plane. If the window cannot open out of plane, then minInt32Value is the position of the window when fully closed and must be 0. If the window can open out of plane, the minInt32Value indicates the window is fully open in its position out of plane and will be a negative value. See the example below for a more detailed explanation.\nThe maxInt32Value indicates the window is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed\/fully open out-of-plane and fully open positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nFor example, this is how the property should work for a window that can move out of plane: For a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work with negative values as follows: Max = sunroof completely open 0 = sunroof closed. Min = sunroof vent completely open\nNote that in this mode, 0 indicates the window is closed.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Window Move",
                 "value": 322964417,
-                "description": "Window Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the window is opening in plane\/closing in the out of plane direction at the fastest speed. The minInt32Value indicates the window is closing in plane\/opening in the out of plane direction at the fastest speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the window reaches the positional limit, the value must reset to 0. If WINDOW_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nFor a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work as follows:\nIf sunroof is open: Max = open the sunroof further, automatically stop when fully open. Min = close the sunroof, automatically stop when sunroof is closed.\nIf vent is open: Max = close the vent, automatically stop when vent is closed. Min = open the vent further, automatically stop when vent is fully open.\nIf sunroof is in the closed position: Max = open the sunroof, automatically stop when sunroof is fully open. Min = open the vent, automatically stop when vent is fully open.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Window Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the window is closing in plane\/opening in the out of plane direction at the fastest speed.\nThe maxInt32Value indicates the window is opening in plane\/closing in the out of plane direction at the fastest speed.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the window reaches the positional limit, the value must reset to 0. If WINDOW_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nFor a window that may open out of plane (i.e. vent mode of sunroof) this parameter will work as follows:\nIf sunroof is open: Max = open the sunroof further, automatically stop when fully open. Min = close the sunroof, automatically stop when sunroof is closed.\nIf vent is open: Max = close the vent, automatically stop when vent is closed. Min = open the vent further, automatically stop when vent is fully open.\nIf sunroof is in the closed position: Max = open the sunroof, automatically stop when sunroof is fully open. Min = open the vent, automatically stop when vent is fully open.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Window Child Lock",
@@ -936,7 +936,7 @@
             {
                 "name": "WINDSHIELD_WIPERS_PERIOD",
                 "value": 322964421,
-                "description": "Windshield wipers period (milliseconds).\nReturns the instantaneous time period for 1 full cycle of the windshield wipers in milliseconds. A full cycle is defined as a wiper moving from and returning to its rest position.\nWhen an intermittent wiper setting is selected, this property value must be set to 0 during the \"pause\" period of the intermittent wiping.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The maxInt32Value for each area ID must specify the longest wiper period. The minInt32Value must be set to 0 for each area ID."
+                "description": "Windshield wipers period (milliseconds).\nReturns the instantaneous time period for 1 full cycle of the windshield wipers in milliseconds. A full cycle is defined as a wiper moving from and returning to its rest position.\nWhen an intermittent wiper setting is selected, this property value must be set to 0 during the \"pause\" period of the intermittent wiping.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value must be set to 0 for each area ID.\nThe maxInt32Value for each area ID must specify the longest wiper period.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
             },
             {
                 "name": "Windshield wipers state.",
@@ -945,7 +945,7 @@
                     "WindshieldWipersState"
                 ],
                 "data_enum": "WindshieldWipersState",
-                "description": "Windshield wipers state.\nReturns the current state of the windshield wipers. The value of WINDSHIELD_WIPERS_STATE may not match the value of WINDSHIELD_WIPERS_SWITCH. (e.g. WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_SWITCH = WindshieldWipersSwitch#AUTO).\nIf WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_PERIOD is implemented, then WINDSHIELD_WIPERS_PERIOD must reflect the time period of 1 full cycle of the wipers.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended)."
+                "description": "Windshield wipers state.\nReturns the current state of the windshield wipers. The value of WINDSHIELD_WIPERS_STATE may not match the value of WINDSHIELD_WIPERS_SWITCH. (e.g. WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_SWITCH = WindshieldWipersSwitch#AUTO).\nIf WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_PERIOD is implemented, then WINDSHIELD_WIPERS_PERIOD must reflect the time period of 1 full cycle of the wipers.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "Windshield wipers switch.",
@@ -954,27 +954,27 @@
                     "WindshieldWipersSwitch"
                 ],
                 "data_enum": "WindshieldWipersSwitch",
-                "description": "Windshield wipers switch.\nRepresents the position of the switch controlling the windshield wipers. The value of WINDSHIELD_WIPERS_SWITCH may not match the value of WINDSHIELD_WIPERS_STATE (e.g. WINDSHIELD_WIPERS_SWITCH = AUTO and WINDSHIELD_WIPERS_STATE = WindshieldWipersState#ON).\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended).\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.\nIf this property is implemented as VehiclePropertyAccess.READ_WRITE and the OTHER state is listed in the VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported value for writing. It is only a supported value for reading."
+                "description": "Windshield wipers switch.\nRepresents the position of the switch controlling the windshield wipers. The value of WINDSHIELD_WIPERS_SWITCH may not match the value of WINDSHIELD_WIPERS_STATE (e.g. WINDSHIELD_WIPERS_SWITCH = AUTO and WINDSHIELD_WIPERS_STATE = WindshieldWipersState#ON).\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.\nIf this property is implemented as VehiclePropertyAccess.READ_WRITE and the OTHER state is listed in the VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported value for writing. It is only a supported value for reading."
             },
             {
                 "name": "Steering wheel depth position",
                 "value": 289410016,
-                "description": "Steering wheel depth position\nAll steering wheel properties' unique ids start from 0x0BE0.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the steering wheel position furthest from the driver. The minInt32Value indicates the steering wheel position closest to the driver.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and furthest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel depth position\nAll steering wheel properties' unique ids start from 0x0BE0.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel position closest to the driver.\nThe maxInt32Value indicates the steering wheel position furthest from the driver.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and furthest positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering wheel depth movement",
                 "value": 289410017,
-                "description": "Steering wheel depth movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the steering wheel moving away from the driver. The minInt32Value indicates the steering wheel moving towards the driver.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel depth movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel moving towards the driver.\nThe maxInt32Value indicates the steering wheel moving away from the driver.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering wheel height position",
                 "value": 289410018,
-                "description": "Steering wheel height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the steering wheel being in the highest position. The minInt32Value indicates the steering wheel being in the lowest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel being in the lowest position.\nThe maxInt32Value indicates the steering wheel being in the highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Steering wheel height movement",
                 "value": 289410019,
-                "description": "Steering wheel height movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value indicates the steering wheel moving upwards. The minInt32Value indicates the steering wheel moving downwards.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel height movement\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the steering wheel moving downwards.\nThe maxInt32Value indicates the steering wheel moving upwards.\nLarger integers, either positive or negative, indicate a faster movement speed. Once the steering wheel reaches the positional limit, the value must reset to 0. If STEERING_WHEEL_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "STEERING_WHEEL_THEFT_LOCK_ENABLED",
@@ -994,7 +994,7 @@
             {
                 "name": "GLOVE_BOX_DOOR_POS",
                 "value": 356518896,
-                "description": "Property that represents the current position of the glove box door.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates that the glove box door is closed. The minInt32Value must be 0. The maxInt32Value indicates that the glove box door is in the fully open position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat by which the glove box is intended to be used  (e.g. if the front right dashboard has a glove box embedded in it, then the area ID should be SEAT_1_RIGHT).\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Property that represents the current position of the glove box door.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates that the glove box door is closed. The minInt32Value must be 0.\nThe maxInt32Value indicates that the glove box door is in the fully open position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThe area ID must match the seat by which the glove box is intended to be used  (e.g. if the front right dashboard has a glove box embedded in it, then the area ID should be SEAT_1_RIGHT).\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "Lock or unlock the glove box.",
@@ -1176,7 +1176,7 @@
                     "VehicleLightState"
                 ],
                 "data_enum": "VehicleLightState",
-                "description": "Steering wheel lights state\nRepresents the current state of the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, STEERING_WHEEL_LIGHTS_STATE may not match the value of STEERING_WHEEL_LIGHTS_SWITCH (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported."
+                "description": "Steering wheel lights state\nRepresents the current state of the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, STEERING_WHEEL_LIGHTS_STATE may not match the value of STEERING_WHEEL_LIGHTS_SWITCH (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleLightState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "Steering wheel lights switch",
@@ -1185,7 +1185,7 @@
                     "VehicleLightSwitch"
                 ],
                 "data_enum": "VehicleLightSwitch",
-                "description": "Steering wheel lights switch\nRepresents the position of the switch controlling the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_STATE which represents the current state of the steering wheel lights. Therefore, STEERING_WHEEL_LIGHTS_SWITCH may not match the value of STEERING_WHEEL_LIGHTS_STATE (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Steering wheel lights switch\nRepresents the position of the switch controlling the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_STATE which represents the current state of the steering wheel lights. Therefore, STEERING_WHEEL_LIGHTS_SWITCH may not match the value of STEERING_WHEEL_LIGHTS_STATE (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleLightSwitch are supported. At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "SUPPORT_CUSTOMIZE_VENDOR_PERMISSION",
@@ -1428,7 +1428,7 @@
                     "VehicleAutonomousState"
                 ],
                 "data_enum": "VehicleAutonomousState",
-                "description": "Current state of vehicle autonomy.\nDefines the level of autonomy currently engaged in the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAutonomousState are supported."
+                "description": "Current state of vehicle autonomy.\nDefines the level of autonomy currently engaged in the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAutonomousState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleAutonomousState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "VEHICLE_DRIVING_AUTOMATION_TARGET_LEVEL",
@@ -1466,7 +1466,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "AutomaticEmergencyBrakingState",
-                "description": "Automatic Emergency Braking (AEB) state.\nReturns the current state of AEB. This property must always return a valid state defined in AutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property should apply for higher speed applications only. For representing the state of the low speed automatic emergency braking system, LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_STATE should be used.\nIf AEB includes forward collision warnings before activating the brakes, those warnings must be surfaced through the Forward Collision Warning (FCW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Automatic Emergency Braking (AEB) state.\nReturns the current state of AEB. This property must always return a valid state defined in AutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property should apply for higher speed applications only. For representing the state of the low speed automatic emergency braking system, LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_STATE should be used.\nIf AEB includes forward collision warnings before activating the brakes, those warnings must be surfaced through the Forward Collision Warning (FCW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "FORWARD_COLLISION_WARNING_ENABLED",
@@ -1481,7 +1481,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "ForwardCollisionWarningState",
-                "description": "Forward Collision Warning (FCW) state.\nReturns the current state of FCW. This property must always return a valid state defined in ForwardCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Forward Collision Warning (FCW) state.\nReturns the current state of FCW. This property must always return a valid state defined in ForwardCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "BLIND_SPOT_WARNING_ENABLED",
@@ -1496,7 +1496,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "BlindSpotWarningState",
-                "description": "Blind Spot Warning (BSW) state.\nReturns the current state of BSW. This property must always return a valid state defined in BlindSpotWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Blind Spot Warning (BSW) state.\nReturns the current state of BSW. This property must always return a valid state defined in BlindSpotWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "LANE_DEPARTURE_WARNING_ENABLED",
@@ -1511,7 +1511,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LaneDepartureWarningState",
-                "description": "Lane Departure Warning (LDW) state.\nReturns the current state of LDW. This property must always return a valid state defined in LaneDepartureWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Lane Departure Warning (LDW) state.\nReturns the current state of LDW. This property must always return a valid state defined in LaneDepartureWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "LANE_KEEP_ASSIST_ENABLED",
@@ -1526,7 +1526,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LaneKeepAssistState",
-                "description": "Lane Keep Assist (LKA) state.\nReturns the current state of LKA. This property must always return a valid state defined in LaneKeepAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LKA includes lane departure warnings before applying steering corrections, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Lane Keep Assist (LKA) state.\nReturns the current state of LKA. This property must always return a valid state defined in LaneKeepAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LKA includes lane departure warnings before applying steering corrections, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "LANE_CENTERING_ASSIST_ENABLED",
@@ -1540,7 +1540,7 @@
                     "LaneCenteringAssistCommand"
                 ],
                 "data_enum": "LaneCenteringAssistCommand",
-                "description": "Lane Centering Assist (LCA) commands.\nCommands to activate and suspend LCA.\nWhen the command ACTIVATE from LaneCenteringAssistCommand is sent, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATION_REQUESTED. When the ACTIVATE command succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATED. When the command DEACTIVATE from LaneCenteringAssistCommand succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ENABLED.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of LaneCenteringAssistCommand are supported.\nWhen this property is not available because LCA is disabled (i.e. LANE_CENTERING_ASSIST_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if LANE_CENTERING_ASSIST_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+                "description": "Lane Centering Assist (LCA) commands.\nCommands to activate and suspend LCA.\nWhen the command ACTIVATE from LaneCenteringAssistCommand is sent, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATION_REQUESTED. When the ACTIVATE command succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATED. When the command DEACTIVATE from LaneCenteringAssistCommand succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ENABLED.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of LaneCenteringAssistCommand are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of LaneCenteringAssistCommand are supported. At boot, the supported values list is the same as supportedEnumValues.\nWhen this property is not available because LCA is disabled (i.e. LANE_CENTERING_ASSIST_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if LANE_CENTERING_ASSIST_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
             },
             {
                 "name": "LANE_CENTERING_ASSIST_STATE",
@@ -1550,7 +1550,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LaneCenteringAssistState",
-                "description": "Lane Centering Assist (LCA) state.\nReturns the current state of LCA. This property must always return a valid state defined in LaneCenteringAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LCA includes lane departure warnings, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Lane Centering Assist (LCA) state.\nReturns the current state of LCA. This property must always return a valid state defined in LaneCenteringAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LCA includes lane departure warnings, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "EMERGENCY_LANE_KEEP_ASSIST_ENABLED",
@@ -1565,7 +1565,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "EmergencyLaneKeepAssistState",
-                "description": "Emergency Lane Keep Assist (ELKA) state.\nReturns the current state of ELKA. Generally, this property should return a valid state defined in the EmergencyLaneKeepAssistState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Emergency Lane Keep Assist (ELKA) state.\nReturns the current state of ELKA. Generally, this property should return a valid state defined in the EmergencyLaneKeepAssistState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "CRUISE_CONTROL_ENABLED",
@@ -1580,7 +1580,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "CruiseControlType",
-                "description": "Current type of Cruise Control (CC).\nWhen CRUISE_CONTROL_ENABLED is true, this property returns the type of CC that is currently enabled (for example, standard CC, adaptive CC, predictive CC, etc.). Generally, this property should return a valid state defined in the CruiseControlType or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported.\nTrying to write CruiseControlType#OTHER or an ErrorState to this property will throw an IllegalArgumentException.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+                "description": "Current type of Cruise Control (CC).\nWhen CRUISE_CONTROL_ENABLED is true, this property returns the type of CC that is currently enabled (for example, standard CC, adaptive CC, predictive CC, etc.). Generally, this property should return a valid state defined in the CruiseControlType or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues.\nTrying to write CruiseControlType#OTHER or an ErrorState to this property will throw an IllegalArgumentException.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
             },
             {
                 "name": "CRUISE_CONTROL_STATE",
@@ -1590,7 +1590,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "CruiseControlState",
-                "description": "Current state of Cruise Control (CC).\nThis property returns the current state of CC. Generally, this property should return a valid state defined in the CruiseControlState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Current state of Cruise Control (CC).\nThis property returns the current state of CC. Generally, this property should return a valid state defined in the CruiseControlState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "CRUISE_CONTROL_COMMAND",
@@ -1599,7 +1599,7 @@
                     "CruiseControlCommand"
                 ],
                 "data_enum": "CruiseControlCommand",
-                "description": "Write Cruise Control (CC) commands.\nSee CruiseControlCommand for the details about each supported command.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState are supported. Any unsupported commands sent through this property must return StatusCode#INVALID_ARG.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+                "description": "Write Cruise Control (CC) commands.\nSee CruiseControlCommand for the details about each supported command.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState are supported. Any unsupported commands sent through this property must return StatusCode#INVALID_ARG.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlState are supported. At boot, the supported values list is the same as supportedEnumValues.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
             },
             {
                 "name": "CRUISE_CONTROL_TARGET_SPEED",
@@ -1629,7 +1629,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "HandsOnDetectionDriverState",
-                "description": "Hands On Detection (HOD) driver state.\nReturns whether the driver's hands are on the steering wheel. Generally, this property should return a valid state defined in the HandsOnDetectionDriverState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle wants to send a warning to the user because the driver's hands have been off the steering wheel for too long, the warning should be surfaced through HANDS_ON_DETECTION_WARNING.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Hands On Detection (HOD) driver state.\nReturns whether the driver's hands are on the steering wheel. Generally, this property should return a valid state defined in the HandsOnDetectionDriverState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle wants to send a warning to the user because the driver's hands have been off the steering wheel for too long, the warning should be surfaced through HANDS_ON_DETECTION_WARNING.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "HANDS_ON_DETECTION_WARNING",
@@ -1639,7 +1639,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "HandsOnDetectionWarning",
-                "description": "Hands On Detection (HOD) warning.\nReturns whether a warning is being sent to the driver for having their hands off the wheel for too long a duration.\nGenerally, this property should return a valid state defined in HandsOnDetectionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Hands On Detection (HOD) warning.\nReturns whether a warning is being sent to the driver for having their hands off the wheel for too long a duration.\nGenerally, this property should return a valid state defined in HandsOnDetectionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "DRIVER_DROWSINESS_ATTENTION_SYSTEM_ENABLED",
@@ -1654,7 +1654,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDrowsinessAttentionState",
-                "description": "Driver drowsiness and attention level state.\nReturns the current detected state of driver drowiness and attention level based on the Karolinska Sleepiness scale. If alternative measurement methods are used, the value should be translated to the Karolinska Sleepiness Scale equivalent.\nGenerally, this property should return a valid state defined in the DriverDrowsinessAttentionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too drowsy, the warning should be surfaced through {@link #DRIVER_DROWSINESS_ATTENTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Driver drowsiness and attention level state.\nReturns the current detected state of driver drowiness and attention level based on the Karolinska Sleepiness scale. If alternative measurement methods are used, the value should be translated to the Karolinska Sleepiness Scale equivalent.\nGenerally, this property should return a valid state defined in the DriverDrowsinessAttentionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too drowsy, the warning should be surfaced through {@link #DRIVER_DROWSINESS_ATTENTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "DRIVER_DROWSINESS_ATTENTION_WARNING_ENABLED",
@@ -1669,7 +1669,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDrowsinessAttentionWarning",
-                "description": "Driver drowsiness and attention warning.\nReturns whether a warning is being sent to the driver for being drowsy or not attentive.\nGenerally, this property should return a valid state defined in DriverDrowsinessAttentionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Driver drowsiness and attention warning.\nReturns whether a warning is being sent to the driver for being drowsy or not attentive.\nGenerally, this property should return a valid state defined in DriverDrowsinessAttentionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "DRIVER_DISTRACTION_SYSTEM_ENABLED",
@@ -1684,7 +1684,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDistractionState",
-                "description": "Driver distraction state.\nReturns the current detected driver distraction state.\nGenerally, this property should return a valid state defined in the DriverDistractionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too distracted, the warning should be surfaced through {@link #DRIVER_DISTRACTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Driver distraction state.\nReturns the current detected driver distraction state.\nGenerally, this property should return a valid state defined in the DriverDistractionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too distracted, the warning should be surfaced through {@link #DRIVER_DISTRACTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "DRIVER_DISTRACTION_WARNING_ENABLED",
@@ -1699,7 +1699,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "DriverDistractionWarning",
-                "description": "Driver distraction warning.\nReturns whether a warning is being sent to the driver for being distracted.\nGenerally, this property should return a valid state defined in DriverDistractionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Driver distraction warning.\nReturns whether a warning is being sent to the driver for being distracted.\nGenerally, this property should return a valid state defined in DriverDistractionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "LOW_SPEED_COLLISION_WARNING_ENABLED",
@@ -1714,7 +1714,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LowSpeedCollisionWarningState",
-                "description": "Low Speed Collision Warning state.\nReturns the current state of Low Speed Collision Warning. This property must always return a valid state defined in LowSpeedCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing FORWARD_COLLISION_WARNING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision detection system for low speed environments, this property should not be implemented.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Low Speed Collision Warning state.\nReturns the current state of Low Speed Collision Warning. This property must always return a valid state defined in LowSpeedCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing FORWARD_COLLISION_WARNING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision detection system for low speed environments, this property should not be implemented.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "CROSS_TRAFFIC_MONITORING_ENABLED",
@@ -1729,7 +1729,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "CrossTrafficMonitoringWarningState",
-                "description": "Cross Traffic Monitoring warning state.\nReturns the current state of Cross Traffic Monitoring Warning. This property must always return a valid state defined in CrossTrafficMonitoringWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Cross Traffic Monitoring warning state.\nReturns the current state of Cross Traffic Monitoring Warning. This property must always return a valid state defined in CrossTrafficMonitoringWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             },
             {
                 "name": "LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_ENABLED",
@@ -1744,7 +1744,7 @@
                     "ErrorState"
                 ],
                 "data_enum": "LowSpeedAutomaticEmergencyBrakingState",
-                "description": "Low Speed Automatic Emergency Braking state.\nReturns the current state of Low Speed Automatic Emergency Braking. This property must always return a valid state defined in LowSpeedAutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing AUTOMATIC_EMERGENCY_BRAKING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision avoidance system for low speed environments, this property should not be implemented.\nIf Low Speed Automatic Emergency Braking includes collision warnings before activating the brakes, those warnings must be surfaced through use of LOW_SPEED_COLLISION_WARNING_ENABLED and LOW_SPEED_COLLISION_WARNING_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported."
+                "description": "Low Speed Automatic Emergency Braking state.\nReturns the current state of Low Speed Automatic Emergency Braking. This property must always return a valid state defined in LowSpeedAutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing AUTOMATIC_EMERGENCY_BRAKING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision avoidance system for low speed environments, this property should not be implemented.\nIf Low Speed Automatic Emergency Braking includes collision warnings before activating the brakes, those warnings must be surfaced through use of LOW_SPEED_COLLISION_WARNING_ENABLED and LOW_SPEED_COLLISION_WARNING_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
             }
         ]
     },
diff --git a/automotive/vehicle/aidl/impl/3/utils/common/test/PendingRequestPoolTest.cpp b/automotive/vehicle/aidl/impl/3/utils/common/test/PendingRequestPoolTest.cpp
index 734c739..cc690d7 100644
--- a/automotive/vehicle/aidl/impl/3/utils/common/test/PendingRequestPoolTest.cpp
+++ b/automotive/vehicle/aidl/impl/3/utils/common/test/PendingRequestPoolTest.cpp
@@ -57,7 +57,7 @@
 
   private:
     // Test timeout is 0.1s.
-    static const int64_t TEST_TIMEOUT = 100000000;
+    static constexpr int64_t TEST_TIMEOUT = 100000000;
 
     std::unique_ptr<PendingRequestPool> mPool;
 };
diff --git a/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/src/JsonConfigLoader.cpp b/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/src/JsonConfigLoader.cpp
index 7a1f0e0..f910beb 100644
--- a/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/src/JsonConfigLoader.cpp
+++ b/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/src/JsonConfigLoader.cpp
@@ -58,6 +58,7 @@
 using ::aidl::android::hardware::automotive::vehicle::GsrComplianceRequirementType;
 using ::aidl::android::hardware::automotive::vehicle::HandsOnDetectionDriverState;
 using ::aidl::android::hardware::automotive::vehicle::HandsOnDetectionWarning;
+using ::aidl::android::hardware::automotive::vehicle::HasSupportedValueInfo;
 using ::aidl::android::hardware::automotive::vehicle::ImpactSensorLocation;
 using ::aidl::android::hardware::automotive::vehicle::LaneCenteringAssistCommand;
 using ::aidl::android::hardware::automotive::vehicle::LaneCenteringAssistState;
@@ -600,6 +601,22 @@
         if (!supportedEnumValues.empty()) {
             areaConfig.supportedEnumValues = std::move(supportedEnumValues);
         }
+
+        if (jsonAreaConfig.isMember("hasSupportedValueInfo")) {
+            HasSupportedValueInfo hasSupportedValueInfo = HasSupportedValueInfo{};
+            const Json::Value& jsonHasSupportedValueInfo = jsonAreaConfig["hasSupportedValueInfo"];
+            tryParseJsonValueToVariable(jsonHasSupportedValueInfo, "hasMinSupportedValue",
+                                        /*optional=*/true,
+                                        &hasSupportedValueInfo.hasMinSupportedValue, errors);
+            tryParseJsonValueToVariable(jsonHasSupportedValueInfo, "hasMaxSupportedValue",
+                                        /*optional=*/true,
+                                        &hasSupportedValueInfo.hasMaxSupportedValue, errors);
+            tryParseJsonValueToVariable(jsonHasSupportedValueInfo, "hasSupportedValuesList",
+                                        /*optional=*/true,
+                                        &hasSupportedValueInfo.hasSupportedValuesList, errors);
+            areaConfig.hasSupportedValueInfo = std::move(hasSupportedValueInfo);
+        }
+
         config->config.areaConfigs.push_back(std::move(areaConfig));
 
         RawPropValues areaValue = {};
diff --git a/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/test/JsonConfigLoaderUnitTest.cpp b/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/test/JsonConfigLoaderUnitTest.cpp
index 54afbd4..595c2ed 100644
--- a/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/test/JsonConfigLoaderUnitTest.cpp
+++ b/automotive/vehicle/aidl/impl/current/default_config/JsonConfigLoader/test/JsonConfigLoaderUnitTest.cpp
@@ -26,6 +26,7 @@
 namespace automotive {
 namespace vehicle {
 
+using ::aidl::android::hardware::automotive::vehicle::HasSupportedValueInfo;
 using ::aidl::android::hardware::automotive::vehicle::RawPropValues;
 using ::aidl::android::hardware::automotive::vehicle::VehicleAreaConfig;
 using ::aidl::android::hardware::automotive::vehicle::VehiclePropConfig;
@@ -803,6 +804,108 @@
     ASSERT_EQ(areaConfig2.areaId, 1);
 }
 
+TEST_F(JsonConfigLoaderUnitTest, testHasSupportedValueInfo_allTrue) {
+    std::istringstream iss(R"(
+    {
+        "properties": [{
+            "property": "VehicleProperty::CABIN_LIGHTS_SWITCH",
+            "areas": [{
+                "access": "VehiclePropertyAccess::WRITE",
+                "areaId": 0,
+                "hasSupportedValueInfo": {
+                    "hasMinSupportedValue": true,
+                    "hasMaxSupportedValue": true,
+                    "hasSupportedValuesList": true
+                }
+            }],
+            "access": "VehiclePropertyAccess::READ",
+        }]
+    }
+    )");
+
+    auto result = mLoader.loadPropConfig(iss);
+    ASSERT_TRUE(result.ok());
+
+    auto configs = result.value();
+    ASSERT_EQ(configs.size(), 1u);
+
+    const VehiclePropConfig& config = configs.begin()->second.config;
+    ASSERT_EQ(config.access, VehiclePropertyAccess::READ);
+    ASSERT_EQ(config.areaConfigs.size(), 1u);
+
+    const VehicleAreaConfig& areaConfig = config.areaConfigs[0];
+    ASSERT_EQ(areaConfig.hasSupportedValueInfo, HasSupportedValueInfo({
+                                                        .hasMinSupportedValue = true,
+                                                        .hasMaxSupportedValue = true,
+                                                        .hasSupportedValuesList = true,
+                                                }));
+}
+
+TEST_F(JsonConfigLoaderUnitTest, testHasSupportedValueInfo_allFalse) {
+    std::istringstream iss(R"(
+    {
+        "properties": [{
+            "property": "VehicleProperty::CABIN_LIGHTS_SWITCH",
+            "areas": [{
+                "access": "VehiclePropertyAccess::WRITE",
+                "areaId": 0,
+                "hasSupportedValueInfo": {
+                    "hasMinSupportedValue": false,
+                    "hasMaxSupportedValue": false,
+                    "hasSupportedValuesList": false
+                }
+            }],
+            "access": "VehiclePropertyAccess::READ",
+        }]
+    }
+    )");
+
+    auto result = mLoader.loadPropConfig(iss);
+    ASSERT_TRUE(result.ok());
+
+    auto configs = result.value();
+    ASSERT_EQ(configs.size(), 1u);
+
+    const VehiclePropConfig& config = configs.begin()->second.config;
+    ASSERT_EQ(config.access, VehiclePropertyAccess::READ);
+    ASSERT_EQ(config.areaConfigs.size(), 1u);
+
+    const VehicleAreaConfig& areaConfig = config.areaConfigs[0];
+    ASSERT_EQ(areaConfig.hasSupportedValueInfo, HasSupportedValueInfo({
+                                                        .hasMinSupportedValue = false,
+                                                        .hasMaxSupportedValue = false,
+                                                        .hasSupportedValuesList = false,
+                                                }));
+}
+
+TEST_F(JsonConfigLoaderUnitTest, testHasSupportedValueInfo_unspecified) {
+    std::istringstream iss(R"(
+    {
+        "properties": [{
+            "property": "VehicleProperty::CABIN_LIGHTS_SWITCH",
+            "areas": [{
+                "access": "VehiclePropertyAccess::WRITE",
+                "areaId": 0
+            }],
+            "access": "VehiclePropertyAccess::READ",
+        }]
+    }
+    )");
+
+    auto result = mLoader.loadPropConfig(iss);
+    ASSERT_TRUE(result.ok());
+
+    auto configs = result.value();
+    ASSERT_EQ(configs.size(), 1u);
+
+    const VehiclePropConfig& config = configs.begin()->second.config;
+    ASSERT_EQ(config.access, VehiclePropertyAccess::READ);
+    ASSERT_EQ(config.areaConfigs.size(), 1u);
+
+    const VehicleAreaConfig& areaConfig = config.areaConfigs[0];
+    ASSERT_EQ(areaConfig.hasSupportedValueInfo, std::nullopt);
+}
+
 }  // namespace vehicle
 }  // namespace automotive
 }  // namespace hardware
diff --git a/automotive/vehicle/aidl/impl/current/default_config/config/TestProperties.json b/automotive/vehicle/aidl/impl/current/default_config/config/TestProperties.json
index 73e4d44..83debf7 100644
--- a/automotive/vehicle/aidl/impl/current/default_config/config/TestProperties.json
+++ b/automotive/vehicle/aidl/impl/current/default_config/config/TestProperties.json
@@ -99,12 +99,15 @@
                 {
                     "defaultValue": {
                         "int32Values": [
-                            1
+                            2
                         ]
                     },
                     "areaId": "VehicleAreaWindow::FRONT_WINDSHIELD",
-                    "minInt32Value": -100,
-                    "maxInt32Value": 100
+                    "hasSupportedValueInfo": {
+                        "hasMinSupportedValue": true,
+                        "hasMaxSupportedValue": true,
+                        "hasSupportedValuesList": true
+                    }
                 },
                 {
                     "defaultValue": {
diff --git a/automotive/vehicle/aidl/impl/current/fake_impl/hardware/include/FakeVehicleHardware.h b/automotive/vehicle/aidl/impl/current/fake_impl/hardware/include/FakeVehicleHardware.h
index 5916307..b7ada62 100644
--- a/automotive/vehicle/aidl/impl/current/fake_impl/hardware/include/FakeVehicleHardware.h
+++ b/automotive/vehicle/aidl/impl/current/fake_impl/hardware/include/FakeVehicleHardware.h
@@ -108,6 +108,12 @@
     aidl::android::hardware::automotive::vehicle::StatusCode unsubscribe(int32_t propId,
                                                                          int32_t areaId) override;
 
+    std::vector<aidlvhal::MinMaxSupportedValueResult> getMinMaxSupportedValues(
+            const std::vector<PropIdAreaId>& propIdAreaIds) override;
+
+    std::vector<aidlvhal::SupportedValuesListResult> getSupportedValuesLists(
+            const std::vector<PropIdAreaId>& propIdAreaIds) override;
+
   protected:
     // mValuePool is also used in mServerSidePropStore.
     const std::shared_ptr<VehiclePropValuePool> mValuePool;
diff --git a/automotive/vehicle/aidl/impl/current/fake_impl/hardware/src/FakeVehicleHardware.cpp b/automotive/vehicle/aidl/impl/current/fake_impl/hardware/src/FakeVehicleHardware.cpp
index 52daf68..f1aaefc 100644
--- a/automotive/vehicle/aidl/impl/current/fake_impl/hardware/src/FakeVehicleHardware.cpp
+++ b/automotive/vehicle/aidl/impl/current/fake_impl/hardware/src/FakeVehicleHardware.cpp
@@ -62,11 +62,13 @@
 using ::aidl::android::hardware::automotive::vehicle::ErrorState;
 using ::aidl::android::hardware::automotive::vehicle::GetValueRequest;
 using ::aidl::android::hardware::automotive::vehicle::GetValueResult;
+using ::aidl::android::hardware::automotive::vehicle::MinMaxSupportedValueResult;
 using ::aidl::android::hardware::automotive::vehicle::RawPropValues;
 using ::aidl::android::hardware::automotive::vehicle::SetValueRequest;
 using ::aidl::android::hardware::automotive::vehicle::SetValueResult;
 using ::aidl::android::hardware::automotive::vehicle::StatusCode;
 using ::aidl::android::hardware::automotive::vehicle::SubscribeOptions;
+using ::aidl::android::hardware::automotive::vehicle::SupportedValuesListResult;
 using ::aidl::android::hardware::automotive::vehicle::toString;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReport;
 using ::aidl::android::hardware::automotive::vehicle::VehicleApPowerStateReq;
@@ -2299,6 +2301,62 @@
     return StatusCode::OK;
 }
 
+std::vector<MinMaxSupportedValueResult> FakeVehicleHardware::getMinMaxSupportedValues(
+        const std::vector<PropIdAreaId>& propIdAreaIds) {
+    std::vector<MinMaxSupportedValueResult> results;
+    // We only support VENDOR_EXTENSION_INT_PROPERTY
+    for (const auto& propIdAreaId : propIdAreaIds) {
+        int propId = propIdAreaId.propId;
+        int areaId = propIdAreaId.areaId;
+        if (propId != toInt(TestVendorProperty::VENDOR_EXTENSION_INT_PROPERTY)) {
+            results.push_back(MinMaxSupportedValueResult{
+                    .status = StatusCode::INVALID_ARG,
+            });
+            continue;
+        }
+        results.push_back(MinMaxSupportedValueResult{
+                .status = StatusCode::OK,
+                .minSupportedValue =
+                        RawPropValues{
+                                .int32Values = {0},
+                        },
+                .maxSupportedValue =
+                        RawPropValues{
+                                .int32Values = {10},
+                        },
+        });
+    }
+    return results;
+}
+
+std::vector<SupportedValuesListResult> FakeVehicleHardware::getSupportedValuesLists(
+        const std::vector<PropIdAreaId>& propIdAreaIds) {
+    std::vector<SupportedValuesListResult> results;
+    // We only support VENDOR_EXTENSION_INT_PROPERTY
+    for (const auto& propIdAreaId : propIdAreaIds) {
+        int propId = propIdAreaId.propId;
+        int areaId = propIdAreaId.areaId;
+        if (propId != toInt(TestVendorProperty::VENDOR_EXTENSION_INT_PROPERTY)) {
+            results.push_back(SupportedValuesListResult{
+                    .status = StatusCode::INVALID_ARG,
+            });
+            continue;
+        }
+        results.push_back(SupportedValuesListResult{
+                .status = StatusCode::OK,
+                .supportedValuesList = std::vector<std::optional<RawPropValues>>({
+                        RawPropValues{.int32Values = {0}},
+                        RawPropValues{.int32Values = {2}},
+                        RawPropValues{.int32Values = {4}},
+                        RawPropValues{.int32Values = {6}},
+                        RawPropValues{.int32Values = {8}},
+                        RawPropValues{.int32Values = {10}},
+                }),
+        });
+    }
+    return results;
+}
+
 bool FakeVehicleHardware::isVariableUpdateRateSupported(const VehiclePropConfig& vehiclePropConfig,
                                                         int32_t areaId) {
     for (size_t i = 0; i < vehiclePropConfig.areaConfigs.size(); i++) {
diff --git a/automotive/vehicle/aidl/impl/current/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp b/automotive/vehicle/aidl/impl/current/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp
index f6098ca..29a690b 100644
--- a/automotive/vehicle/aidl/impl/current/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp
+++ b/automotive/vehicle/aidl/impl/current/fake_impl/hardware/test/FakeVehicleHardwareTest.cpp
@@ -3884,6 +3884,44 @@
     }
 }
 
+TEST_F(FakeVehicleHardwareTest, testGetMinMaxSupportedValues) {
+    auto results = getHardware()->getMinMaxSupportedValues({
+            PropIdAreaId{.propId = toInt(TestVendorProperty::VENDOR_EXTENSION_INT_PROPERTY),
+                         .areaId = 0},
+            PropIdAreaId{.propId = toInt(VehicleProperty::HVAC_TEMPERATURE_SET), .areaId = 0},
+    });
+
+    ASSERT_EQ(results.size(), 2u);
+    EXPECT_EQ(results[0].status, StatusCode::OK);
+    EXPECT_NE(results[0].minSupportedValue, std::nullopt);
+    EXPECT_EQ(results[0].minSupportedValue.value(), RawPropValues{.int32Values = {0}});
+    EXPECT_NE(results[0].maxSupportedValue, std::nullopt);
+    EXPECT_EQ(results[0].maxSupportedValue.value(), RawPropValues{.int32Values = {10}});
+    EXPECT_EQ(results[1].status, StatusCode::INVALID_ARG);
+}
+
+TEST_F(FakeVehicleHardwareTest, testGetSupportedValuesLists) {
+    auto results = getHardware()->getSupportedValuesLists({
+            PropIdAreaId{.propId = toInt(TestVendorProperty::VENDOR_EXTENSION_INT_PROPERTY),
+                         .areaId = 0},
+            PropIdAreaId{.propId = toInt(VehicleProperty::HVAC_TEMPERATURE_SET), .areaId = 0},
+    });
+
+    ASSERT_EQ(results.size(), 2u);
+    EXPECT_EQ(results[0].status, StatusCode::OK);
+    EXPECT_NE(results[0].supportedValuesList, std::nullopt);
+    EXPECT_NE((results[0].supportedValuesList)->size(), 0u);
+    EXPECT_EQ(results[0].supportedValuesList.value(), std::vector<std::optional<RawPropValues>>({
+                                                              RawPropValues{.int32Values = {0}},
+                                                              RawPropValues{.int32Values = {2}},
+                                                              RawPropValues{.int32Values = {4}},
+                                                              RawPropValues{.int32Values = {6}},
+                                                              RawPropValues{.int32Values = {8}},
+                                                              RawPropValues{.int32Values = {10}},
+                                                      }));
+    EXPECT_EQ(results[1].status, StatusCode::INVALID_ARG);
+}
+
 }  // namespace fake
 }  // namespace vehicle
 }  // namespace automotive
diff --git a/automotive/vehicle/aidl/impl/current/utils/common/test/PendingRequestPoolTest.cpp b/automotive/vehicle/aidl/impl/current/utils/common/test/PendingRequestPoolTest.cpp
index 734c739..cc690d7 100644
--- a/automotive/vehicle/aidl/impl/current/utils/common/test/PendingRequestPoolTest.cpp
+++ b/automotive/vehicle/aidl/impl/current/utils/common/test/PendingRequestPoolTest.cpp
@@ -57,7 +57,7 @@
 
   private:
     // Test timeout is 0.1s.
-    static const int64_t TEST_TIMEOUT = 100000000;
+    static constexpr int64_t TEST_TIMEOUT = 100000000;
 
     std::unique_ptr<PendingRequestPool> mPool;
 };
diff --git a/automotive/vehicle/aidl/impl/current/utils/test_vendor_properties/android/hardware/automotive/vehicle/TestVendorProperty.aidl b/automotive/vehicle/aidl/impl/current/utils/test_vendor_properties/android/hardware/automotive/vehicle/TestVendorProperty.aidl
index 3c877fa..217387f 100644
--- a/automotive/vehicle/aidl/impl/current/utils/test_vendor_properties/android/hardware/automotive/vehicle/TestVendorProperty.aidl
+++ b/automotive/vehicle/aidl/impl/current/utils/test_vendor_properties/android/hardware/automotive/vehicle/TestVendorProperty.aidl
@@ -19,6 +19,7 @@
 /**
  * Test vendor properties used in reference VHAL implementation.
  */
+@JavaDerive(toString=true)
 @Backing(type="int")
 enum TestVendorProperty {
 
diff --git a/automotive/vehicle/aidl/impl/current/vhal/include/ConnectedClient.h b/automotive/vehicle/aidl/impl/current/vhal/include/ConnectedClient.h
index addc901..335f5c0 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/include/ConnectedClient.h
+++ b/automotive/vehicle/aidl/impl/current/vhal/include/ConnectedClient.h
@@ -116,6 +116,10 @@
             CallbackType callback,
             std::vector<aidl::android::hardware::automotive::vehicle::VehiclePropError>&&
                     vehiclePropErrors);
+
+    // Invokes onSupportedValueChange callback.
+    static void sendSupportedValueChangeEvents(CallbackType callback,
+                                               std::vector<PropIdAreaId> propIdAreaIds);
 };
 
 }  // namespace vehicle
diff --git a/automotive/vehicle/aidl/impl/current/vhal/include/DefaultVehicleHal.h b/automotive/vehicle/aidl/impl/current/vhal/include/DefaultVehicleHal.h
index 02dbe9e..d360be0 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/include/DefaultVehicleHal.h
+++ b/automotive/vehicle/aidl/impl/current/vhal/include/DefaultVehicleHal.h
@@ -219,7 +219,7 @@
     // mBinderEvents.
     void onBinderDiedUnlinkedHandler();
 
-    size_t countSubscribeClients();
+    size_t countClients();
 
     // Handles the property change events in batch.
     void handleBatchedPropertyEvents(std::vector<aidlvhal::VehiclePropValue>&& batchedEvents);
@@ -255,6 +255,10 @@
             const std::weak_ptr<SubscriptionManager>& subscriptionManager,
             const std::vector<SetValueErrorEvent>& errorEvents);
 
+    static void onSupportedValueChange(
+            const std::weak_ptr<SubscriptionManager>& subscriptionManager,
+            const std::vector<PropIdAreaId>& updatedPropIdAreaIds);
+
     static void checkHealth(IVehicleHardware* hardware,
                             std::weak_ptr<SubscriptionManager> subscriptionManager);
 
diff --git a/automotive/vehicle/aidl/impl/current/vhal/include/SubscriptionManager.h b/automotive/vehicle/aidl/impl/current/vhal/include/SubscriptionManager.h
index 59c21aa..f4e6ced 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/include/SubscriptionManager.h
+++ b/automotive/vehicle/aidl/impl/current/vhal/include/SubscriptionManager.h
@@ -118,6 +118,11 @@
                        std::vector<aidl::android::hardware::automotive::vehicle::VehiclePropError>>
     getSubscribedClientsForErrorEvents(const std::vector<SetValueErrorEvent>& errorEvents);
 
+    // For a list of [propId, areaId]s that has updated supported value, returns a map that maps
+    // subscribing clients to updated [propId, areaId]s.
+    std::unordered_map<CallbackType, std::vector<PropIdAreaId>>
+    getSubscribedClientsForSupportedValueChange(const std::vector<PropIdAreaId>& propIdAreaIds);
+
     // Subscribes to supported values change.
     VhalResult<void> subscribeSupportedValueChange(const CallbackType& callback,
                                                    const std::vector<PropIdAreaId>& propIdAreaIds);
@@ -141,6 +146,7 @@
   private:
     // Friend class for testing.
     friend class DefaultVehicleHalTest;
+    friend class SubscriptionManagerTest;
 
     IVehicleHardware* mVehicleHardware;
 
diff --git a/automotive/vehicle/aidl/impl/current/vhal/src/ConnectedClient.cpp b/automotive/vehicle/aidl/impl/current/vhal/src/ConnectedClient.cpp
index 35b93d2..ac2691a 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/src/ConnectedClient.cpp
+++ b/automotive/vehicle/aidl/impl/current/vhal/src/ConnectedClient.cpp
@@ -306,6 +306,30 @@
     }
 }
 
+void SubscriptionClient::sendSupportedValueChangeEvents(std::shared_ptr<IVehicleCallback> callback,
+                                                        std::vector<PropIdAreaId> propIdAreaIds) {
+    if (propIdAreaIds.empty()) {
+        return;
+    }
+
+    std::vector<aidl::android::hardware::automotive::vehicle::PropIdAreaId> vhalPropIdAreaIds;
+    for (const auto& propIdAreaId : propIdAreaIds) {
+        vhalPropIdAreaIds.push_back(aidl::android::hardware::automotive::vehicle::PropIdAreaId{
+                .propId = propIdAreaId.propId,
+                .areaId = propIdAreaId.areaId,
+        });
+    }
+
+    if (ScopedAStatus callbackStatus = callback->onSupportedValueChange(vhalPropIdAreaIds);
+        !callbackStatus.isOk()) {
+        ALOGE("subscribe: failed to call onSupportedValueChange callback, client ID: %p, error: "
+              "%s, "
+              "exception: %d, service specific error: %d",
+              callback->asBinder().get(), callbackStatus.getMessage(),
+              callbackStatus.getExceptionCode(), callbackStatus.getServiceSpecificError());
+    }
+}
+
 }  // namespace vehicle
 }  // namespace automotive
 }  // namespace hardware
diff --git a/automotive/vehicle/aidl/impl/current/vhal/src/DefaultVehicleHal.cpp b/automotive/vehicle/aidl/impl/current/vhal/src/DefaultVehicleHal.cpp
index 25af50e..ea0c215 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/src/DefaultVehicleHal.cpp
+++ b/automotive/vehicle/aidl/impl/current/vhal/src/DefaultVehicleHal.cpp
@@ -160,6 +160,11 @@
                     [subscriptionManagerCopy](std::vector<SetValueErrorEvent> errorEvents) {
                         onPropertySetErrorEvent(subscriptionManagerCopy, errorEvents);
                     }));
+    mVehicleHardware->registerSupportedValueChangeCallback(
+            std::make_unique<IVehicleHardware::SupportedValueChangeCallback>(
+                    [subscriptionManagerCopy](std::vector<PropIdAreaId> propIdAreaIds) {
+                        onSupportedValueChange(subscriptionManagerCopy, propIdAreaIds);
+                    }));
 
     // Register heartbeat event.
     mRecurrentAction = std::make_shared<std::function<void()>>(
@@ -207,7 +212,8 @@
         std::vector<VehiclePropValue>&& updatedValues) {
     auto batchedEventQueueStrong = batchedEventQueue.lock();
     if (batchedEventQueueStrong == nullptr) {
-        ALOGW("the batched property events queue is destroyed, DefaultVehicleHal is ending");
+        ALOGW("%s: the batched property events queue is destroyed, DefaultVehicleHal is ending",
+              __func__);
         return;
     }
     batchedEventQueueStrong->push(std::move(updatedValues));
@@ -223,7 +229,7 @@
     ATRACE_CALL();
     auto manager = subscriptionManager.lock();
     if (manager == nullptr) {
-        ALOGW("the SubscriptionManager is destroyed, DefaultVehicleHal is ending");
+        ALOGW("%s: the SubscriptionManager is destroyed, DefaultVehicleHal is ending", __func__);
         return;
     }
     auto updatedValuesByClients = manager->getSubscribedClients(std::move(updatedValues));
@@ -237,7 +243,7 @@
         const std::vector<SetValueErrorEvent>& errorEvents) {
     auto manager = subscriptionManager.lock();
     if (manager == nullptr) {
-        ALOGW("the SubscriptionManager is destroyed, DefaultVehicleHal is ending");
+        ALOGW("%s: the SubscriptionManager is destroyed, DefaultVehicleHal is ending", __func__);
         return;
     }
     auto vehiclePropErrorsByClient = manager->getSubscribedClientsForErrorEvents(errorEvents);
@@ -246,6 +252,22 @@
     }
 }
 
+void DefaultVehicleHal::onSupportedValueChange(
+        const std::weak_ptr<SubscriptionManager>& subscriptionManager,
+        const std::vector<PropIdAreaId>& propIdAreaIds) {
+    auto manager = subscriptionManager.lock();
+    if (manager == nullptr) {
+        ALOGW("%s: the SubscriptionManager is destroyed, DefaultVehicleHal is ending", __func__);
+        return;
+    }
+    auto updatedPropIdAreaIdsByClient =
+            manager->getSubscribedClientsForSupportedValueChange(propIdAreaIds);
+    for (auto& [callback, updatedPropIdAreaIds] : updatedPropIdAreaIdsByClient) {
+        SubscriptionClient::sendSupportedValueChangeEvents(callback,
+                                                           std::move(updatedPropIdAreaIds));
+    }
+}
+
 template <class T>
 std::shared_ptr<T> DefaultVehicleHal::getOrCreateClient(
         std::unordered_map<const AIBinder*, std::shared_ptr<T>>* clients,
@@ -931,7 +953,9 @@
     }
 
     {
-        // Lock to make sure onBinderDied would not be called concurrently.
+        // Lock to make sure onBinderDied would not be called concurrently
+        // (before subscribe). Without this, we may create a new subscription for an already dead
+        // client which will never be unsubscribed.
         std::scoped_lock lockGuard(mLock);
         if (!monitorBinderLifeCycleLocked(callback->asBinder().get())) {
             return ScopedAStatus::fromExceptionCodeWithMessage(EX_TRANSACTION_FAILED,
@@ -1156,14 +1180,24 @@
     if (propIdAreaIdsToSubscribe.empty()) {
         return ScopedAStatus::ok();
     }
-    auto result =
-            mSubscriptionManager->subscribeSupportedValueChange(callback, propIdAreaIdsToSubscribe);
-    if (!result.ok()) {
-        ALOGW("registerSupportedValueChangeCallback: failed to subscribe supported value change"
-              " for %s, error: %s",
-              fmt::format("{}", propIdAreaIdsToSubscribe).c_str(),
-              result.error().message().c_str());
-        return toScopedAStatus(result);
+    {
+        // Lock to make sure onBinderDied would not be called concurrently
+        // (before subscribeSupportedValueChange). Without this, we may create a new subscription
+        // for an already dead client which will never be unsubscribed.
+        std::scoped_lock lockGuard(mLock);
+        if (!monitorBinderLifeCycleLocked(callback->asBinder().get())) {
+            return ScopedAStatus::fromExceptionCodeWithMessage(EX_TRANSACTION_FAILED,
+                                                               "client died");
+        }
+        auto result = mSubscriptionManager->subscribeSupportedValueChange(callback,
+                                                                          propIdAreaIdsToSubscribe);
+        if (!result.ok()) {
+            ALOGW("registerSupportedValueChangeCallback: failed to subscribe supported value change"
+                  " for %s, error: %s",
+                  fmt::format("{}", propIdAreaIdsToSubscribe).c_str(),
+                  result.error().message().c_str());
+            return toScopedAStatus(result);
+        }
     }
     return ScopedAStatus::ok();
 }
@@ -1302,15 +1336,19 @@
         dprintf(fd, "Containing %zu property configs\n", configsByPropIdCopy.size());
         dprintf(fd, "Currently have %zu getValues clients\n", mGetValuesClients.size());
         dprintf(fd, "Currently have %zu setValues clients\n", mSetValuesClients.size());
-        dprintf(fd, "Currently have %zu subscribe clients\n", countSubscribeClients());
+        dprintf(fd, "Currently have %zu subscribe clients\n",
+                mSubscriptionManager->countPropertyChangeClients());
         dprintf(fd, "Currently have %zu supported values change subscribe clients\n",
                 mSubscriptionManager->countSupportedValueChangeClients());
     }
     return STATUS_OK;
 }
 
-size_t DefaultVehicleHal::countSubscribeClients() {
-    return mSubscriptionManager->countPropertyChangeClients();
+size_t DefaultVehicleHal::countClients() {
+    std::scoped_lock<std::mutex> lockGuard(mLock);
+    return mGetValuesClients.size() + mSetValuesClients.size() +
+           mSubscriptionManager->countPropertyChangeClients() +
+           mSubscriptionManager->countSupportedValueChangeClients();
 }
 
 }  // namespace vehicle
diff --git a/automotive/vehicle/aidl/impl/current/vhal/src/SubscriptionManager.cpp b/automotive/vehicle/aidl/impl/current/vhal/src/SubscriptionManager.cpp
index f790033..64c46c9 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/src/SubscriptionManager.cpp
+++ b/automotive/vehicle/aidl/impl/current/vhal/src/SubscriptionManager.cpp
@@ -478,7 +478,7 @@
             mSupportedValueChangeClientsByPropIdAreaId.end()) {
             mSupportedValueChangeClientsByPropIdAreaId[propIdAreaId].erase(clientId);
         }
-        if (mSupportedValueChangeClientsByPropIdAreaId.empty()) {
+        if (mSupportedValueChangeClientsByPropIdAreaId[propIdAreaId].empty()) {
             mSupportedValueChangeClientsByPropIdAreaId.erase(propIdAreaId);
         }
         mSupportedValueChangePropIdAreaIdsByClient[clientId].erase(propIdAreaId);
@@ -581,6 +581,25 @@
     return clients;
 }
 
+std::unordered_map<std::shared_ptr<IVehicleCallback>, std::vector<PropIdAreaId>>
+SubscriptionManager::getSubscribedClientsForSupportedValueChange(
+        const std::vector<PropIdAreaId>& propIdAreaIds) {
+    std::scoped_lock<std::mutex> lockGuard(mLock);
+    std::unordered_map<std::shared_ptr<IVehicleCallback>, std::vector<PropIdAreaId>>
+            propIdAreaIdsByClient;
+
+    for (const auto& propIdAreaId : propIdAreaIds) {
+        const auto clientIter = mSupportedValueChangeClientsByPropIdAreaId.find(propIdAreaId);
+        if (clientIter == mSupportedValueChangeClientsByPropIdAreaId.end()) {
+            continue;
+        }
+        for (const auto& [_, client] : clientIter->second) {
+            propIdAreaIdsByClient[client].push_back(propIdAreaId);
+        }
+    }
+    return propIdAreaIdsByClient;
+}
+
 bool SubscriptionManager::isEmpty() {
     std::scoped_lock<std::mutex> lockGuard(mLock);
     return mSubscribedPropsByClient.empty() && mClientsByPropIdAreaId.empty() &&
diff --git a/automotive/vehicle/aidl/impl/current/vhal/test/DefaultVehicleHalTest.cpp b/automotive/vehicle/aidl/impl/current/vhal/test/DefaultVehicleHalTest.cpp
index 0526f7d..3b89e5f 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/test/DefaultVehicleHalTest.cpp
+++ b/automotive/vehicle/aidl/impl/current/vhal/test/DefaultVehicleHalTest.cpp
@@ -272,6 +272,10 @@
     void SetUp() override { init(std::make_unique<MockVehicleHardware>()); }
 
     void init(std::unique_ptr<MockVehicleHardware> hardware) {
+        // Default init uses the following static configs to create the mock IVehicleHardware,
+        // individual test case may use setHardware to overwrite the underlying IVehicleHardware
+        // to use a different set of configs.
+
         std::vector<VehiclePropConfig> testConfigs;
         for (size_t i = 0; i < 10000; i++) {
             testConfigs.push_back(VehiclePropConfig{
@@ -420,18 +424,8 @@
                 .changeMode = VehiclePropertyChangeMode::ON_CHANGE,
         });
         hardware->setPropertyConfigs(testConfigs);
-        mHardwarePtr = hardware.get();
-        mVhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-        mVhalClient = IVehicle::fromBinder(mVhal->asBinder());
-        mCallback = ndk::SharedRefBase::make<MockVehicleCallback>();
-        // Keep the local binder alive.
-        mBinder = mCallback->asBinder();
-        mCallbackClient = IVehicleCallback::fromBinder(mBinder);
 
-        // Set the linkToDeath to a fake implementation that always returns OK.
-        auto handler = std::make_unique<TestBinderLifecycleHandler>();
-        mBinderLifecycleHandler = handler.get();
-        mVhal->setBinderLifecycleHandler(std::move(handler));
+        setHardware(std::move(hardware));
     }
 
     void TearDown() override {
@@ -451,11 +445,7 @@
 
     size_t countPendingRequests() { return mVhal->mPendingRequestPool->countPendingRequests(); }
 
-    size_t countClients() {
-        std::scoped_lock<std::mutex> lockGuard(mVhal->mLock);
-        return mVhal->mGetValuesClients.size() + mVhal->mSetValuesClients.size() +
-               mVhal->countSubscribeClients();
-    }
+    size_t countClients() { return mVhal->countClients(); }
 
     std::shared_ptr<PendingRequestPool> getPool() { return mVhal->mPendingRequestPool; }
 
@@ -548,6 +538,33 @@
         return {};
     }
 
+  protected:
+    // Sets the underlying IVehicleHardware and recreates the DefaultVehicleHal objects under test.
+    // If used, caller should call this at the beginning of the test case.
+    void setHardware(std::unique_ptr<MockVehicleHardware> hardware) {
+        setHardware(std::move(hardware), 0);
+    }
+
+    void setHardware(std::unique_ptr<MockVehicleHardware> hardware, int32_t testInterfaceVersion) {
+        mHardwarePtr = hardware.get();
+        if (testInterfaceVersion == 0) {
+            mVhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
+        } else {
+            mVhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware),
+                                                                testInterfaceVersion);
+        }
+        // Set the linkToDeath to a fake implementation that always returns OK.
+        auto handler = std::make_unique<TestBinderLifecycleHandler>();
+        mBinderLifecycleHandler = handler.get();
+        mVhal->setBinderLifecycleHandler(std::move(handler));
+
+        mVhalClient = IVehicle::fromBinder(mVhal->asBinder());
+        mCallback = ndk::SharedRefBase::make<MockVehicleCallback>();
+        // Keep the local binder alive.
+        mBinder = mCallback->asBinder();
+        mCallbackClient = IVehicleCallback::fromBinder(mBinder);
+    }
+
   private:
     class TestBinderLifecycleHandler final : public DefaultVehicleHal::BinderLifecycleInterface {
       public:
@@ -588,11 +605,10 @@
 
     auto hardware = std::make_unique<MockVehicleHardware>();
     hardware->setPropertyConfigs(testConfigs);
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     VehiclePropConfigs output;
-    auto status = client->getAllPropConfigs(&output);
+    auto status = getClient()->getAllPropConfigs(&output);
 
     ASSERT_TRUE(status.isOk()) << "getAllPropConfigs failed: " << status.getMessage();
     ASSERT_THAT(output.payloads, WhenSortedBy(propConfigCmp, Eq(testConfigs)));
@@ -609,11 +625,10 @@
 
     auto hardware = std::make_unique<MockVehicleHardware>();
     hardware->setPropertyConfigs(testConfigs);
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     VehiclePropConfigs output;
-    auto status = client->getAllPropConfigs(&output);
+    auto status = getClient()->getAllPropConfigs(&output);
 
     ASSERT_TRUE(status.isOk()) << "getAllPropConfigs failed: " << status.getMessage();
     ASSERT_TRUE(output.payloads.empty());
@@ -637,12 +652,10 @@
 
     auto hardware = std::make_unique<MockVehicleHardware>();
     hardware->setPropertyConfigs(testConfigs);
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware),
-                                                            /* testInterfaceVersion= */ 2);
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware), /* testInterfaceVersion= */ 2);
 
     VehiclePropConfigs output;
-    auto status = client->getAllPropConfigs(&output);
+    auto status = getClient()->getAllPropConfigs(&output);
 
     ASSERT_TRUE(status.isOk()) << "getAllPropConfigs failed: " << status.getMessage();
     ASSERT_THAT(output.payloads, ElementsAre(VehiclePropConfig{
@@ -666,15 +679,14 @@
     hardware->setPropertyConfigs(testConfigs);
     // Store the pointer for testing. We are sure it is valid.
     MockVehicleHardware* hardwarePtr = hardware.get();
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     VehiclePropConfigs output;
-    auto status = client->getPropConfigs(std::vector<int32_t>({propId1, propId2}), &output);
+    auto status = getClient()->getPropConfigs(std::vector<int32_t>({propId1, propId2}), &output);
 
     ASSERT_TRUE(status.isOk()) << "getPropConfigs failed: " << status.getMessage();
     ASSERT_EQ(output.payloads, testConfigs);
-    ASSERT_FALSE(hardwarePtr->getAllPropertyConfigsCalled());
+    ASSERT_FALSE(getHardware()->getAllPropertyConfigsCalled());
 }
 
 TEST_F(DefaultVehicleHalTest, testGetPropConfigsInvalidArg) {
@@ -689,11 +701,10 @@
 
     auto hardware = std::make_unique<MockVehicleHardware>();
     hardware->setPropertyConfigs(testConfigs);
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     VehiclePropConfigs output;
-    auto status = client->getPropConfigs(
+    auto status = getClient()->getPropConfigs(
             std::vector<int32_t>({testInt32VecProp(1), testInt32VecProp(2), testInt32VecProp(3)}),
             &output);
 
@@ -1863,8 +1874,8 @@
 
     auto maybeResults = getCallback()->nextOnPropertyEventResults();
     size_t retryCount = 0;
-    // Add a 1s (100ms * 10) buffer time.
-    while (!maybeResults.has_value() && retryCount < 10) {
+    // Add a 10s (100ms * 100) buffer time.
+    while (!maybeResults.has_value() && retryCount < 100) {
         retryCount++;
         std::this_thread::sleep_for(std::chrono::milliseconds(100));
     }
@@ -2187,8 +2198,7 @@
     auto response = std::vector<SupportedValuesListResult>({resultFromHardware});
     hardware->setSupportedValuesListResponse(response);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     SupportedValuesListResults results;
 
@@ -2196,14 +2206,14 @@
     auto propIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
     auto propIdAreaId3 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(3), .areaId = 0};
     auto propIdAreaId4 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(4), .areaId = 4};
-    auto status = vhal->getSupportedValuesLists(
+    auto status = getClient()->getSupportedValuesLists(
             std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2, propIdAreaId3,
                                           propIdAreaId4},
             &results);
 
     ASSERT_TRUE(status.isOk()) << "Get non-okay status from getSupportedValuesLists"
                                << status.getMessage();
-    ASSERT_THAT(hardwarePtr->getSupportedValuesListRequest(),
+    ASSERT_THAT(getHardware()->getSupportedValuesListRequest(),
                 ElementsAre(PropIdAreaId{.propId = testInt32VecWindowProp(4), .areaId = 4}))
             << "Only valid request 4 should get to hardware";
 
@@ -2250,8 +2260,7 @@
     auto hardware = std::make_unique<MockVehicleHardware>();
     hardware->setPropertyConfigs(testConfigs);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     SupportedValuesListResults results;
 
@@ -2260,7 +2269,7 @@
     // areaId not valid.
     auto propIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(1), .areaId = 2};
 
-    auto status = vhal->getSupportedValuesLists(
+    auto status = getClient()->getSupportedValuesLists(
             std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2}, &results);
 
     ASSERT_TRUE(status.isOk()) << "Get non-okay status from getSupportedValuesLists"
@@ -2328,8 +2337,7 @@
     auto response = std::vector<MinMaxSupportedValueResult>({resultFromHardware});
     hardware->setMinMaxSupportedValueResponse(response);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     MinMaxSupportedValueResults results;
 
@@ -2337,14 +2345,14 @@
     auto propIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
     auto propIdAreaId3 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(3), .areaId = 0};
     auto propIdAreaId4 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(4), .areaId = 4};
-    auto status = vhal->getMinMaxSupportedValue(
+    auto status = getClient()->getMinMaxSupportedValue(
             std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2, propIdAreaId3,
                                           propIdAreaId4},
             &results);
 
     ASSERT_TRUE(status.isOk()) << "Get non-okay status from getMinMaxSupportedValue"
                                << status.getMessage();
-    ASSERT_THAT(hardwarePtr->getMinMaxSupportedValueRequest(),
+    ASSERT_THAT(getHardware()->getMinMaxSupportedValueRequest(),
                 ElementsAre(PropIdAreaId{.propId = testInt32VecWindowProp(4), .areaId = 4}))
             << "Only valid request 4 should get to hardware";
 
@@ -2396,8 +2404,7 @@
     auto hardware = std::make_unique<MockVehicleHardware>();
     hardware->setPropertyConfigs(testConfigs);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     MinMaxSupportedValueResults results;
 
@@ -2406,7 +2413,7 @@
     // areaId not valid.
     auto propIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(1), .areaId = 2};
 
-    auto status = vhal->getMinMaxSupportedValue(
+    auto status = getClient()->getMinMaxSupportedValue(
             std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2}, &results);
 
     ASSERT_TRUE(status.isOk()) << "Get non-okay status from getMinMaxSupportedValue"
@@ -2448,22 +2455,21 @@
              }});
 
     auto hardware = std::make_unique<MockVehicleHardware>();
-    MockVehicleHardware* hardwarePtr = hardware.get();
     hardware->setPropertyConfigs(testConfigs);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     // This request is ignored because it does not have supported value info.
     auto propIdAreaId1 = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
     auto propIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
-    auto status = client->registerSupportedValueChangeCallback(
+    auto status = getClient()->registerSupportedValueChangeCallback(
             getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2});
 
     ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
                                << status.getMessage();
-    ASSERT_THAT(hardwarePtr->getSubscribedSupportedValueChangePropIdAreaIds(),
-                ElementsAre(PropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2}));
+    ASSERT_THAT(
+            getHardware()->getSubscribedSupportedValueChangePropIdAreaIds(),
+            UnorderedElementsAre(PropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2}));
 }
 
 TEST_F(DefaultVehicleHalTest, testRegisterSupportedValueChangeCallback_invalidRequest) {
@@ -2477,11 +2483,10 @@
     auto hardware = std::make_unique<MockVehicleHardware>();
     hardware->setPropertyConfigs(testConfigs);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     auto propIdAreaId1 = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
-    auto status = client->registerSupportedValueChangeCallback(
+    auto status = getClient()->registerSupportedValueChangeCallback(
             getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId1});
 
     ASSERT_FALSE(status.isOk()) << "registerSupportedValueChangeCallback must return error if one "
@@ -2508,11 +2513,10 @@
     hardware->setStatus("subscribeSupportedValueChange", StatusCode::INTERNAL_ERROR);
     hardware->setPropertyConfigs(testConfigs);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     auto propIdAreaId = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
-    auto status = client->registerSupportedValueChangeCallback(
+    auto status = getClient()->registerSupportedValueChangeCallback(
             getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId});
 
     ASSERT_FALSE(status.isOk()) << "registerSupportedValueChangeCallback must return error if "
@@ -2549,28 +2553,63 @@
              }});
 
     auto hardware = std::make_unique<MockVehicleHardware>();
-    MockVehicleHardware* hardwarePtr = hardware.get();
     hardware->setPropertyConfigs(testConfigs);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     auto propIdAreaId1 = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
     auto propIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
-    auto status = client->registerSupportedValueChangeCallback(
+    auto status = getClient()->registerSupportedValueChangeCallback(
             getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2});
 
     ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
                                << status.getMessage();
 
-    status = client->unregisterSupportedValueChangeCallback(
+    status = getClient()->unregisterSupportedValueChangeCallback(
             getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2});
 
     ASSERT_TRUE(status.isOk()) << "Get non-okay status from unregisterSupportedValueChangeCallback"
                                << status.getMessage();
 
-    ASSERT_TRUE(hardwarePtr->getSubscribedSupportedValueChangePropIdAreaIds().empty())
+    EXPECT_TRUE(getHardware()->getSubscribedSupportedValueChangePropIdAreaIds().empty())
             << "All registered [propId, areaId]s must be unregistered";
+    EXPECT_EQ(countClients(), static_cast<size_t>(0)) << "subscribe clients must be cleared";
+    EXPECT_TRUE(hasNoSubscriptions()) << "subscribe clients must be cleared";
+}
+
+TEST_F(DefaultVehicleHalTest, testUnregisterSupportedValueChangeCallback_errorFromHardware) {
+    auto testConfigs = std::vector<VehiclePropConfig>({VehiclePropConfig{
+            .prop = testInt32VecProp(1),
+            .areaConfigs =
+                    {
+                            {.areaId = 0,
+                             .hasSupportedValueInfo =
+                                     HasSupportedValueInfo{
+                                             .hasMinSupportedValue = false,
+                                             .hasMaxSupportedValue = false,
+                                             .hasSupportedValuesList = true,
+                                     }},
+                    },
+    }});
+
+    auto hardware = std::make_unique<MockVehicleHardware>();
+    hardware->setStatus("unsubscribeSupportedValueChange", StatusCode::INTERNAL_ERROR);
+    hardware->setPropertyConfigs(testConfigs);
+
+    setHardware(std::move(hardware));
+
+    auto propIdAreaId = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+    auto status = getClient()->registerSupportedValueChangeCallback(
+            getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    status = getClient()->unregisterSupportedValueChangeCallback(
+            getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId});
+
+    ASSERT_FALSE(status.isOk()) << "unregisterSupportedValueChangeCallback must return error if "
+                                   "VehicleHardware returns error";
 }
 
 TEST_F(DefaultVehicleHalTest, testUnregisterSupportedValueChangeCallback_ignoreUnregistered) {
@@ -2603,20 +2642,245 @@
              }});
 
     auto hardware = std::make_unique<MockVehicleHardware>();
-    MockVehicleHardware* hardwarePtr = hardware.get();
     hardware->setPropertyConfigs(testConfigs);
 
-    auto vhal = ndk::SharedRefBase::make<DefaultVehicleHal>(std::move(hardware));
-    std::shared_ptr<IVehicle> client = IVehicle::fromBinder(vhal->asBinder());
+    setHardware(std::move(hardware));
 
     auto propIdAreaId1 = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
     auto propIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
-    auto status = client->unregisterSupportedValueChangeCallback(
+    auto status = getClient()->unregisterSupportedValueChangeCallback(
             getCallbackClient(), std::vector<VhalPropIdAreaId>{propIdAreaId1, propIdAreaId2});
 
     ASSERT_TRUE(status.isOk());
 }
 
+TEST_F(DefaultVehicleHalTest, testSupportedValueChangeCallback) {
+    auto testConfigs = std::vector<VehiclePropConfig>(
+            {VehiclePropConfig{
+                     .prop = testInt32VecProp(1),
+                     .areaConfigs =
+                             {
+                                     {.areaId = 0,
+                                      .hasSupportedValueInfo =
+                                              HasSupportedValueInfo{
+                                                      .hasMinSupportedValue = false,
+                                                      .hasMaxSupportedValue = false,
+                                                      .hasSupportedValuesList = true,
+                                              }},
+                             },
+             },
+             VehiclePropConfig{
+                     .prop = testInt32VecWindowProp(2),
+                     .areaConfigs =
+                             {
+                                     {.areaId = 2,
+                                      .hasSupportedValueInfo =
+                                              HasSupportedValueInfo{
+                                                      .hasMinSupportedValue = true,
+                                                      .hasMaxSupportedValue = false,
+                                                      .hasSupportedValuesList = false,
+                                              }},
+                             },
+             }});
+
+    auto hardware = std::make_unique<MockVehicleHardware>();
+    hardware->setPropertyConfigs(testConfigs);
+
+    setHardware(std::move(hardware));
+
+    auto vhalPropIdAreaId1 = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+    auto vhalPropIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
+    auto propIdAreaId1 = PropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+    auto propIdAreaId2 = PropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
+    auto status = getClient()->registerSupportedValueChangeCallback(
+            getCallbackClient(),
+            std::vector<VhalPropIdAreaId>{vhalPropIdAreaId1, vhalPropIdAreaId2});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    getHardware()->sendSupportedValueChangeEvent(
+            std::vector<PropIdAreaId>{propIdAreaId1, propIdAreaId2});
+
+    getCallback()->waitForOnSupportedValueChange(/*size=*/2, /*timeoutInNano=*/1'000'000'000);
+
+    ASSERT_THAT(getCallback()->getOnSupportedValueChangePropIdAreaIds(),
+                ElementsAre(vhalPropIdAreaId1, vhalPropIdAreaId2));
+}
+
+TEST_F(DefaultVehicleHalTest, testSupportedValueChangeCallback_unregister) {
+    auto testConfigs = std::vector<VehiclePropConfig>(
+            {VehiclePropConfig{
+                     .prop = testInt32VecProp(1),
+                     .areaConfigs =
+                             {
+                                     {.areaId = 0,
+                                      .hasSupportedValueInfo =
+                                              HasSupportedValueInfo{
+                                                      .hasMinSupportedValue = false,
+                                                      .hasMaxSupportedValue = false,
+                                                      .hasSupportedValuesList = true,
+                                              }},
+                             },
+             },
+             VehiclePropConfig{
+                     .prop = testInt32VecWindowProp(2),
+                     .areaConfigs =
+                             {
+                                     {.areaId = 2,
+                                      .hasSupportedValueInfo =
+                                              HasSupportedValueInfo{
+                                                      .hasMinSupportedValue = true,
+                                                      .hasMaxSupportedValue = false,
+                                                      .hasSupportedValuesList = false,
+                                              }},
+                             },
+             }});
+
+    auto hardware = std::make_unique<MockVehicleHardware>();
+    hardware->setPropertyConfigs(testConfigs);
+
+    setHardware(std::move(hardware));
+
+    auto vhalPropIdAreaId1 = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+    auto vhalPropIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
+    auto propIdAreaId1 = PropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+    auto propIdAreaId2 = PropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
+    auto status = getClient()->registerSupportedValueChangeCallback(
+            getCallbackClient(),
+            std::vector<VhalPropIdAreaId>{vhalPropIdAreaId1, vhalPropIdAreaId2});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    // After unregistering for propIdAreaId1, we should no longer receive events for it.
+    status = getClient()->unregisterSupportedValueChangeCallback(
+            getCallbackClient(), std::vector<VhalPropIdAreaId>{vhalPropIdAreaId1});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from unregisterSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    getHardware()->sendSupportedValueChangeEvent(
+            std::vector<PropIdAreaId>{propIdAreaId1, propIdAreaId2});
+
+    getCallback()->waitForOnSupportedValueChange(/*size=*/1, /*timeoutInNano=*/1'000'000'000);
+
+    ASSERT_THAT(getCallback()->getOnSupportedValueChangePropIdAreaIds(),
+                ElementsAre(vhalPropIdAreaId2));
+}
+
+TEST_F(DefaultVehicleHalTest, testRegisterSupportedValueChangeCallback_twoClients) {
+    auto testConfigs = std::vector<VehiclePropConfig>(
+            {VehiclePropConfig{
+                     .prop = testInt32VecProp(1),
+                     .areaConfigs =
+                             {
+                                     {.areaId = 0,
+                                      .hasSupportedValueInfo =
+                                              HasSupportedValueInfo{
+                                                      .hasMinSupportedValue = false,
+                                                      .hasMaxSupportedValue = false,
+                                                      .hasSupportedValuesList = true,
+                                              }},
+                             },
+             },
+             VehiclePropConfig{
+                     .prop = testInt32VecWindowProp(2),
+                     .areaConfigs =
+                             {
+                                     {.areaId = 2,
+                                      .hasSupportedValueInfo =
+                                              HasSupportedValueInfo{
+                                                      .hasMinSupportedValue = true,
+                                                      .hasMaxSupportedValue = false,
+                                                      .hasSupportedValuesList = false,
+                                              }},
+                             },
+             }});
+
+    auto hardware = std::make_unique<MockVehicleHardware>();
+    hardware->setPropertyConfigs(testConfigs);
+
+    setHardware(std::move(hardware));
+
+    auto vhalPropIdAreaId1 = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+    auto vhalPropIdAreaId2 = VhalPropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
+    auto propIdAreaId1 = PropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+    auto propIdAreaId2 = PropIdAreaId{.propId = testInt32VecWindowProp(2), .areaId = 2};
+    std::shared_ptr<IVehicleCallback> callback1 = ndk::SharedRefBase::make<MockVehicleCallback>();
+    std::shared_ptr<IVehicleCallback> callback2 = ndk::SharedRefBase::make<MockVehicleCallback>();
+    // Keep binder alive to prevent binder reuse.
+    SpAIBinder binder1 = callback1->asBinder();
+    // Keep binder alive to prevent binder reuse.
+    SpAIBinder binder2 = callback2->asBinder();
+
+    auto status = getClient()->registerSupportedValueChangeCallback(
+            callback1, std::vector<VhalPropIdAreaId>{vhalPropIdAreaId1, vhalPropIdAreaId2});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    status = getClient()->registerSupportedValueChangeCallback(
+            callback2, std::vector<VhalPropIdAreaId>{vhalPropIdAreaId1, vhalPropIdAreaId2});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    ASSERT_THAT(getHardware()->getSubscribedSupportedValueChangePropIdAreaIds(),
+                UnorderedElementsAre(propIdAreaId1, propIdAreaId2));
+
+    status = getClient()->unregisterSupportedValueChangeCallback(
+            callback1, std::vector<VhalPropIdAreaId>{vhalPropIdAreaId1, vhalPropIdAreaId2});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from unregisterSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    ASSERT_THAT(getHardware()->getSubscribedSupportedValueChangePropIdAreaIds(),
+                UnorderedElementsAre(propIdAreaId1, propIdAreaId2))
+            << "[propId, areaId] must still be subscribed if one of the two clients unsubscribe";
+
+    status = getClient()->unregisterSupportedValueChangeCallback(
+            callback2, std::vector<VhalPropIdAreaId>{vhalPropIdAreaId1, vhalPropIdAreaId2});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from unregisterSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    ASSERT_TRUE(getHardware()->getSubscribedSupportedValueChangePropIdAreaIds().empty())
+            << "All registered [propId, areaId]s must be unregistered";
+}
+
+TEST_F(DefaultVehicleHalTest, testRegisterSupportedValueChange_monitorBinderLifecycle) {
+    auto testConfigs = std::vector<VehiclePropConfig>({VehiclePropConfig{
+            .prop = testInt32VecProp(1),
+            .areaConfigs =
+                    {
+                            {.areaId = 0,
+                             .hasSupportedValueInfo =
+                                     HasSupportedValueInfo{
+                                             .hasMinSupportedValue = false,
+                                             .hasMaxSupportedValue = false,
+                                             .hasSupportedValuesList = true,
+                                     }},
+                    },
+    }});
+
+    auto hardware = std::make_unique<MockVehicleHardware>();
+    hardware->setPropertyConfigs(testConfigs);
+
+    setHardware(std::move(hardware));
+
+    auto vhalPropIdAreaId = VhalPropIdAreaId{.propId = testInt32VecProp(1), .areaId = 0};
+
+    auto status = getClient()->registerSupportedValueChangeCallback(
+            getCallbackClient(), std::vector<VhalPropIdAreaId>{vhalPropIdAreaId});
+
+    ASSERT_TRUE(status.isOk()) << "Get non-okay status from registerSupportedValueChangeCallback"
+                               << status.getMessage();
+
+    ASSERT_EQ(countOnBinderDiedContexts(), static_cast<size_t>(1))
+            << "expect one OnBinderDied context when one client is registered";
+}
+
 }  // namespace vehicle
 }  // namespace automotive
 }  // namespace hardware
diff --git a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.cpp b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.cpp
index 72c5dc5..a557b05 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.cpp
+++ b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.cpp
@@ -92,9 +92,14 @@
     return result;
 }
 
-ScopedAStatus MockVehicleCallback::onSupportedValueChange(const std::vector<PropIdAreaId>&) {
-    // TODO(b/381020465): Add relevant implementation.
-    return ScopedAStatus::fromExceptionCode(EX_UNSUPPORTED_OPERATION);
+ScopedAStatus MockVehicleCallback::onSupportedValueChange(
+        const std::vector<PropIdAreaId>& propIdAreaIds) {
+    {
+        std::scoped_lock<std::mutex> lockGuard(mLock);
+        mOnSupportedValueChangePropIdAreaIds = propIdAreaIds;
+    }
+    mCond.notify_all();
+    return ScopedAStatus::ok();
 }
 
 std::optional<GetValueResults> MockVehicleCallback::nextGetValueResults() {
@@ -151,6 +156,19 @@
     });
 }
 
+bool MockVehicleCallback::waitForOnSupportedValueChange(size_t size, size_t timeoutInNano) {
+    std::unique_lock lk(mLock);
+    return mCond.wait_for(lk, std::chrono::nanoseconds(timeoutInNano), [this, size] {
+        ScopedLockAssertion lockAssertion(mLock);
+        return mOnSupportedValueChangePropIdAreaIds.size() >= size;
+    });
+}
+
+std::vector<PropIdAreaId> MockVehicleCallback::getOnSupportedValueChangePropIdAreaIds() {
+    std::scoped_lock<std::mutex> lockGuard(mLock);
+    return mOnSupportedValueChangePropIdAreaIds;
+}
+
 }  // namespace vehicle
 }  // namespace automotive
 }  // namespace hardware
diff --git a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.h b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.h
index 81a85ff..be181a5 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.h
+++ b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleCallback.h
@@ -73,6 +73,9 @@
     bool waitForSetValueResults(size_t size, size_t timeoutInNano);
     bool waitForGetValueResults(size_t size, size_t timeoutInNano);
     bool waitForOnPropertyEventResults(size_t size, size_t timeoutInNano);
+    bool waitForOnSupportedValueChange(size_t size, size_t timeoutInNano);
+    std::vector<aidl::android::hardware::automotive::vehicle::PropIdAreaId>
+    getOnSupportedValueChangePropIdAreaIds();
 
   private:
     std::mutex mLock;
@@ -86,6 +89,8 @@
     int32_t mSharedMemoryFileCount GUARDED_BY(mLock);
     std::list<aidl::android::hardware::automotive::vehicle::VehiclePropErrors>
             mOnPropertySetErrorResults GUARDED_BY(mLock);
+    std::vector<aidl::android::hardware::automotive::vehicle::PropIdAreaId>
+            mOnSupportedValueChangePropIdAreaIds GUARDED_BY(mLock);
 };
 
 }  // namespace vehicle
diff --git a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.cpp b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.cpp
index 11f1835..197e99d 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.cpp
+++ b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.cpp
@@ -228,6 +228,12 @@
     mPropertySetErrorCallback = std::move(callback);
 }
 
+void MockVehicleHardware::registerSupportedValueChangeCallback(
+        std::unique_ptr<const SupportedValueChangeCallback> callback) {
+    std::scoped_lock<std::mutex> lockGuard(mLock);
+    mSupportedValueChangeCallback = std::move(callback);
+}
+
 void MockVehicleHardware::setPropertyConfigs(const std::vector<VehiclePropConfig>& configs) {
     std::scoped_lock<std::mutex> lockGuard(mLock);
     mPropertyConfigs = configs;
@@ -419,6 +425,12 @@
     (*mPropertySetErrorCallback)(errorEvents);
 }
 
+void MockVehicleHardware::sendSupportedValueChangeEvent(
+        const std::vector<PropIdAreaId>& propIdAreaIds) {
+    std::scoped_lock<std::mutex> lockGuard(mLock);
+    (*mSupportedValueChangeCallback)(propIdAreaIds);
+}
+
 bool MockVehicleHardware::getAllPropertyConfigsCalled() {
     std::scoped_lock<std::mutex> lockGuard(mLock);
     return mGetAllPropertyConfigsCalled;
diff --git a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.h b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.h
index e7359db..444166b 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.h
+++ b/automotive/vehicle/aidl/impl/current/vhal/test/MockVehicleHardware.h
@@ -62,6 +62,8 @@
     void registerOnPropertyChangeEvent(
             std::unique_ptr<const PropertyChangeCallback> callback) override;
     void registerOnPropertySetErrorEvent(std::unique_ptr<const PropertySetErrorCallback>) override;
+    void registerSupportedValueChangeCallback(
+            std::unique_ptr<const SupportedValueChangeCallback>) override;
     aidl::android::hardware::automotive::vehicle::StatusCode subscribe(
             aidl::android::hardware::automotive::vehicle::SubscribeOptions options) override;
     aidl::android::hardware::automotive::vehicle::StatusCode unsubscribe(int32_t propId,
@@ -112,6 +114,7 @@
     void setDumpResult(DumpResult result);
     void sendOnPropertySetErrorEvent(const std::vector<SetValueErrorEvent>& errorEvents);
     void setPropertyOnChangeEventBatchingWindow(std::chrono::nanoseconds window);
+    void sendSupportedValueChangeEvent(const std::vector<PropIdAreaId>& propIdAreaIds);
 
     std::set<std::pair<int32_t, int32_t>> getSubscribedOnChangePropIdAreaIds();
     std::set<std::pair<int32_t, int32_t>> getSubscribedContinuousPropIdAreaIds();
@@ -150,6 +153,8 @@
     int64_t mSleepTime GUARDED_BY(mLock) = 0;
     std::unique_ptr<const PropertyChangeCallback> mPropertyChangeCallback GUARDED_BY(mLock);
     std::unique_ptr<const PropertySetErrorCallback> mPropertySetErrorCallback GUARDED_BY(mLock);
+    std::unique_ptr<const SupportedValueChangeCallback> mSupportedValueChangeCallback
+            GUARDED_BY(mLock);
     std::function<aidl::android::hardware::automotive::vehicle::StatusCode(
             std::shared_ptr<const GetValuesCallback>,
             const std::vector<aidl::android::hardware::automotive::vehicle::GetValueRequest>&)>
diff --git a/automotive/vehicle/aidl/impl/current/vhal/test/SubscriptionManagerTest.cpp b/automotive/vehicle/aidl/impl/current/vhal/test/SubscriptionManagerTest.cpp
index 2ac3a73..d624cce 100644
--- a/automotive/vehicle/aidl/impl/current/vhal/test/SubscriptionManagerTest.cpp
+++ b/automotive/vehicle/aidl/impl/current/vhal/test/SubscriptionManagerTest.cpp
@@ -124,6 +124,8 @@
 
     std::shared_ptr<MockVehicleHardware> getHardware() { return mHardware; }
 
+    bool isEmpty() { return mManager->isEmpty(); }
+
   private:
     std::unique_ptr<SubscriptionManager> mManager;
     std::shared_ptr<PropertyCallback> mCallback;
@@ -887,6 +889,80 @@
             << "Must filter out outdated property events if VUR is enabled";
 }
 
+TEST_F(SubscriptionManagerTest, testSubscribeSupportedValueChange) {
+    SpAIBinder binder1 = ndk::SharedRefBase::make<PropertyCallback>()->asBinder();
+    std::shared_ptr<IVehicleCallback> client1 = IVehicleCallback::fromBinder(binder1);
+    SpAIBinder binder2 = ndk::SharedRefBase::make<PropertyCallback>()->asBinder();
+    std::shared_ptr<IVehicleCallback> client2 = IVehicleCallback::fromBinder(binder2);
+
+    PropIdAreaId propIdAreaId1 = {.propId = 0, .areaId = 0};
+    PropIdAreaId propIdAreaId2 = {.propId = 1, .areaId = 1};
+
+    auto result = getManager()->subscribeSupportedValueChange(client1, {propIdAreaId1});
+
+    ASSERT_TRUE(result.ok()) << "failed to call subscribeSupportedValueChange"
+                             << result.error().message();
+
+    result = getManager()->subscribeSupportedValueChange(client2, {propIdAreaId1, propIdAreaId2});
+
+    ASSERT_TRUE(result.ok()) << "failed to call subscribeSupportedValueChange"
+                             << result.error().message();
+
+    auto clients = getManager()->getSubscribedClientsForSupportedValueChange(
+            {propIdAreaId1, propIdAreaId2});
+
+    ASSERT_THAT(clients[client1], UnorderedElementsAre(propIdAreaId1))
+            << "Incorrect supported value change events for client1";
+    ASSERT_THAT(clients[client2], UnorderedElementsAre(propIdAreaId1, propIdAreaId2))
+            << "Incorrect supported value change events for client2";
+}
+
+TEST_F(SubscriptionManagerTest, testUnsubscribeSupportedValueChange) {
+    SpAIBinder binder1 = ndk::SharedRefBase::make<PropertyCallback>()->asBinder();
+    std::shared_ptr<IVehicleCallback> client1 = IVehicleCallback::fromBinder(binder1);
+    SpAIBinder binder2 = ndk::SharedRefBase::make<PropertyCallback>()->asBinder();
+    std::shared_ptr<IVehicleCallback> client2 = IVehicleCallback::fromBinder(binder2);
+
+    PropIdAreaId propIdAreaId1 = {.propId = 0, .areaId = 0};
+    PropIdAreaId propIdAreaId2 = {.propId = 1, .areaId = 1};
+
+    auto result = getManager()->subscribeSupportedValueChange(client1, {propIdAreaId1});
+
+    ASSERT_TRUE(result.ok()) << "failed to call subscribeSupportedValueChange"
+                             << result.error().message();
+
+    result = getManager()->subscribeSupportedValueChange(client2, {propIdAreaId1, propIdAreaId2});
+
+    ASSERT_TRUE(result.ok()) << "failed to call subscribeSupportedValueChange"
+                             << result.error().message();
+
+    result = getManager()->unsubscribeSupportedValueChange(binder2.get(), {propIdAreaId1});
+
+    ASSERT_TRUE(result.ok()) << "failed to call unsubscribeSupportedValueChange"
+                             << result.error().message();
+
+    auto clients = getManager()->getSubscribedClientsForSupportedValueChange(
+            {propIdAreaId1, propIdAreaId2});
+
+    ASSERT_THAT(clients[client1], UnorderedElementsAre(propIdAreaId1))
+            << "Incorrect supported value change events for client1";
+    ASSERT_THAT(clients[client2], UnorderedElementsAre(propIdAreaId2))
+            << "Incorrect supported value change events for client2";
+
+    result = getManager()->unsubscribeSupportedValueChange(binder2.get(), {propIdAreaId2});
+
+    ASSERT_TRUE(result.ok()) << "failed to call unsubscribeSupportedValueChange"
+                             << result.error().message();
+
+    result = getManager()->unsubscribeSupportedValueChange(binder1.get(), {propIdAreaId1});
+
+    ASSERT_TRUE(result.ok()) << "failed to call unsubscribeSupportedValueChange"
+                             << result.error().message();
+
+    EXPECT_EQ(getManager()->countSupportedValueChangeClients(), 0u) << "All clients cleared";
+    EXPECT_TRUE(isEmpty()) << "All clients cleared";
+}
+
 }  // namespace vehicle
 }  // namespace automotive
 }  // namespace hardware
diff --git a/automotive/vehicle/aidl_property/aidl_api/android.hardware.automotive.vehicle.property/current/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl_property/aidl_api/android.hardware.automotive.vehicle.property/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 6188dd9..5abf667 100644
--- a/automotive/vehicle/aidl_property/aidl_api/android.hardware.automotive.vehicle.property/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl_property/aidl_api/android.hardware.automotive.vehicle.property/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -32,7 +32,7 @@
 // later when a module using the interface is updated, e.g., Mainline modules.
 
 package android.hardware.automotive.vehicle;
-@Backing(type="int") @VintfStability
+@Backing(type="int") @JavaDerive(toString=true) @VintfStability
 enum VehicleProperty {
   INVALID = 0x00000000,
   INFO_VIN = (((0x0100 + 0x10000000) + 0x01000000) + 0x00100000) /* 286261504 */,
diff --git a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 797be73..856d38c 100644
--- a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -39,6 +39,7 @@
  * in response to such ill formed requests.
  */
 @VintfStability
+@JavaDerive(toString=true)
 @Backing(type="int")
 enum VehicleProperty {
     /**
@@ -620,22 +621,15 @@
      * }
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     *
      * {@code HasSupportedValueInfo.hasMinSupportedValue} and
      * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
-     *
-     * {@code MinMaxSupportedValueResult.minSupportedValue} represents the lower bound of the
-     * recommended tire pressure for the tire at the specified area ID.
-     *
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} represents the upper bound of the
-     * recommended tire pressure for the tire at the specified area ID.
-     *
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue.
      * For example, if the recommended tire pressure of left_front tire is from 200.0 KILOPASCAL to
      * 240.0 KILOPASCAL, {@code getMinMaxSupportedValue} for
      * [propId=TIRE_PRESSURE, areaId=VehicleAreaWheel::LEFT_FRONT] must return a
      * {@code MinMaxSupportedValueResult} with OK status, 200.0 as minSupportedValue, 240.0 as
      * maxSupportedValue.
-     *
      * At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to
      * maxSupportedValue.
      *
@@ -784,10 +778,8 @@
      * unless all bit flags of ImpactSensorLocation are supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     *
      * {@code getSupportedValuesList} must return a {@code SupportedValuesListResult} that contains
      * supported values unless all bit flags of ImpactSensorLocation are supported.
-     *
      * At boot, supportedEnumValues is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
@@ -825,22 +817,17 @@
      * selected by the driver instead of simply GEAR_DRIVE.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     *
      * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
-     *
      * {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}.
-     *
      * The supportedValues must represent the list of supported gears for this vehicle. For example,
      * for an automatic transmission, the list can be {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK,
      * GEAR_DRIVE, GEAR_1, GEAR_2,...} and for manual transmission it can be {GEAR_NEUTRAL,
      * GEAR_REVERSE, GEAR_1, GEAR_2,...}.
-     *
      * In the case of an automatic transmission vehicle that allows the driver to select specific
      * gears on demand (i.e. "manual mode"), the GEAR_SELECTION property value must be set to the
      * specific gear selected by the driver instead of simply GEAR_DRIVE.
-     *
      * At boot, the config array's values are equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
@@ -866,20 +853,16 @@
      * same as that of the supported gears reported in GEAR_SELECTION.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     *
      * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
-     *
      * {@code getSupportedValuesList} for [GEAR_SELECTION, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}.
-     *
      * The supported values list must represent the list of supported gears
      * for this vehicle.  For example, for an automatic transmission, this list can be
      * {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_PARK, GEAR_1, GEAR_2,...}
      * and for manual transmission the list can be
      * {GEAR_NEUTRAL, GEAR_REVERSE, GEAR_1, GEAR_2,...}. This list need not be the
      * same as that of the supported gears reported in GEAR_SELECTION.
-     *
      * At boot, the config array's values are equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
@@ -935,20 +918,13 @@
      * All values between min and max supported value must be supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     *
      * {@code HasSupportedValueInfo.hasMinSupportedValue} and
      * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for global area ID(0)
-     *
-     * {@code MinMaxSupportedValueResult.minSupportedValue} must be 0.
-     *
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} indicates the setting for the maximum
-     * amount of energy regenerated from braking. The minSupportedValue indicates the setting for no
-     * regenerative braking.
-     *
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
      *
-     *
      * This property is a more granular form of EV_REGENERATIVE_BRAKING_STATE. It allows the user to
      * set a more specific level of regenerative braking if the states in EvRegenerativeBrakingState
      * are not granular enough for the OEM.
@@ -1054,14 +1030,11 @@
      * all enum values of EvStoppingMode are supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     *
      * For the global area ID (0), {@code getSupportedValuesList}
      * must return a {@code SupportedValuesListResult} that contains supported values unless all
      * enum values of EvStoppingMode are supported.
-     *
      * At boot, supportedEnumValues is equal to the supported values list.
      *
-     *
      * The EvStoppingMode enum may be extended to include more states in the future.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -1109,12 +1082,10 @@
      * recommended) and ErrorState are supported.
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     *
      * For the global area ID (0), {@code getSupportedValuesList}
      * must return a {@code SupportedValuesListResult} that contains supported values unless all
      * states of both ElectronicStabilityControlState (including OTHER, which is not
      * recommended) and ErrorState are supported.
-     *
      * At boot, supportedEnumValues is equal to the supported values list.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
@@ -1232,24 +1203,19 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the lowest fan speed.
+     *
      * The maxInt32Value indicates the highest fan speed.
      *
      * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
-     *
      * {@code HasSupportedValueInfo.hasMinSupportedValue} and
      * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific
      * area ID.
-     *
-     * {@code MinMaxSupportedValueResult.minSupportedValue} indicates the lowest fan speed.
-     *
-     * {@code MinMaxSupportedValueResult.maxSupportedValue} indicates the highest fan speed.
-     *
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
      * All integers between minSupportedValue and maxSupportedValue must be supported.
-     *
      * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
      * maxSupportedValue.
      *
-     *
      * This property is not in any particular unit but in a specified range of relative speeds.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -1297,6 +1263,7 @@
      * The minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.
      *
      * The minFloatValue indicates the minimum temperature setting in Celsius.
+     *
      * The maxFloatValue indicates the maximum temperature setting in Celsius.
      *
      * If all the values between minFloatValue and maxFloatValue are not supported, the configArray
@@ -1336,6 +1303,19 @@
      *
      * Any value set in between a valid value should be rounded to the closest valid value.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specific
+     * area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minFloatValue.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxFloatValue.
+     * If not all the values between minSupportedValue and maxSupportedValue are supported,
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the
+     * specified area ID. At boot, supportedValuesList must be equal to what is described in
+     * config array.
+     * At boot, minFloatValue is equal to minSupportedValue, maxFloatValue is equal to
+     * maxSupportedValue.
+     *
      * It is highly recommended that the OEM also implement the HVAC_TEMPERATURE_VALUE_SUGGESTION
      * vehicle property because it provides applications a simple method for determining temperature
      * values that can be set for this vehicle and for converting values between Celsius and
@@ -1348,6 +1328,7 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit.CELSIUS
+     * @require_min_max_supported_value
      * @version 2
      */
     HVAC_TEMPERATURE_SET = 0x0503 + 0x10000000 + 0x05000000
@@ -1508,10 +1489,21 @@
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the maximum seat temperature heating setting.
      * The minInt32Value must be 0, unless the vehicle supports seat cooling as well. In this case,
      * minInt32Value indicates the maximum seat temperature cooling setting.
      *
+     * The maxInt32Value indicates the maximum seat temperature heating setting.
+     *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified
+     * area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit, but in a specified range of relative temperature
      * settings.
      *
@@ -1521,6 +1513,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     HVAC_SEAT_TEMPERATURE = 0x050B + 0x10000000 + 0x05000000
@@ -1533,9 +1526,20 @@
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value in the config data represents the maximum heating level.
      * The minInt32Value in the config data MUST be zero and indicates no heating.
      *
+     * The maxInt32Value in the config data represents the maximum heating level.
+     *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified
+     * area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative heating
      * settings.
      *
@@ -1545,6 +1549,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     HVAC_SIDE_MIRROR_HEAT = 0x050C + 0x10000000 + 0x04000000
@@ -1557,10 +1562,20 @@
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the maximum steering wheel heating setting.
      * The minInt32Value should be 0, unless the vehicle supports steering wheel cooling as well. In
      * such a case, the minInt32Value indicates the maximum steering wheel cooling setting.
      *
+     * The maxInt32Value indicates the maximum steering wheel heating setting.
+     *
+     * If {@code HasSupportedValueInfo} is not null for the global area ID (0):
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of heating settings.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -1569,6 +1584,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     HVAC_STEERING_WHEEL_HEAT = 0x050D + 0x10000000 + 0x01000000
@@ -1576,12 +1592,21 @@
     /**
      * Temperature units for display
      *
-     * Indicates whether the vehicle is displaying temperature to the user as
-     * Celsius or Fahrenheit.
+     * Indicates whether the vehicle is displaying temperature to the user as Celsius or Fahrenheit.
+     *
      * VehiclePropConfig.configArray is used to indicate the supported temperature display units.
+     *
      * For example: configArray[0] = CELSIUS
      *              configArray[1] = FAHRENHEIT
      *
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * (0) must be {@code true}.
+     * {@code getSupportedValuesLists} for [HVAC_TEMPERATURE_DISPLAY_UNITS, areaId=0] must return a
+     * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+     * e.g. [CELSIUS, FAHRENHEIT].
+     * At boot, the values in the config array are equal to the supported values list.
+     *
      * This parameter MAY be used for displaying any HVAC temperature in the system.
      * Values must be one of VehicleUnit.CELSIUS or VehicleUnit.FAHRENHEIT
      * Note that internally, all temperatures are represented in floating point Celsius.
@@ -1596,6 +1621,8 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleUnit
+     * @require_supported_values_list
+     * @legacy_supported_values_in_config
      * @version 2
      */
     HVAC_TEMPERATURE_DISPLAY_UNITS = 0x050E + 0x10000000 + 0x01000000
@@ -1696,12 +1723,24 @@
     /**
      * Seat ventilation
      *
-     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
+     * The minInt32Value and maxInt32Value in VehicleAreaConfig must be defined.
+     *
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value must be 0.
+     *
      * The maxInt32Value indicates the maximum ventilation setting available for the seat.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the specified
+     * area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in the specified range of ventilation
      * settings.
      *
@@ -1715,6 +1754,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     HVAC_SEAT_VENTILATION = 0x0513 + 0x10000000 + 0x05000000
@@ -1800,6 +1840,14 @@
      *              configArray[1] = KILOMETER
      *              configArray[2] = MILE
      *
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * (0) must be {@code true}.
+     * {@code getSupportedValuesLists} for [DISTANCE_DISPLAY_UNITS, areaId=0] must returns a
+     * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+     * e.g. [METER, KILOMETER, MILE].
+     * At boot, the values in the config array are equal to the supported values list.
+     *
      * If updating DISTANCE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
      * then their values must be updated and communicated to the AAOS framework as well.
      *
@@ -1810,6 +1858,8 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleUnit
+     * @require_supported_values_list
+     * @legacy_supported_values_in_config
      * @version 2
      */
     DISTANCE_DISPLAY_UNITS = 0x0600 + 0x10000000 + 0x01000000
@@ -1825,6 +1875,14 @@
      * For example: configArray[0] = LITER
      *              configArray[1] = GALLON
      *
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * (0) must be {@code true}.
+     * {@code getSupportedValuesLists} for [FUEL_VOLUME_DISPLAY_UNITS, areaId=0] must return a
+     * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+     * e.g. [LITER, GALLON].
+     * At boot, the values in the config array are equal to the supported values list.
+     *
      * If updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
      * then their values must be updated and communicated to the AAOS framework as well.
      *
@@ -1835,6 +1893,8 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleUnit
+     * @require_supported_values_list
+     * @legacy_supported_values_in_config
      * @version 2
      */
     FUEL_VOLUME_DISPLAY_UNITS = 0x0601 + 0x10000000 + 0x01000000
@@ -1851,6 +1911,14 @@
      *              configArray[1] = PSI
      *              configArray[2] = BAR
      *
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * (0) must be {@code true}.
+     * {@code getSupportedValuesLists} for [TIRE_PRESSURE_DISPLAY_UNITS, areaId=0] must return a
+     * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+     * e.g. [KILOPASCAL, PSI, BAR].
+     * At boot, the values in the config array are equal to the supported values list.
+     *
      * If updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS
      * properties, then their values must be updated and communicated to the AAOS framework as well.
      *
@@ -1861,6 +1929,8 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleUnit
+     * @require_supported_values_list
+     * @legacy_supported_values_in_config
      * @version 2
      */
     TIRE_PRESSURE_DISPLAY_UNITS = 0x0602 + 0x10000000 + 0x01000000
@@ -1877,6 +1947,14 @@
      *              configArray[1] = AMPERE_HOURS
      *              configArray[2] = KILOWATT_HOUR
      *
+     * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+     * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+     * (0) must be {@code true}.
+     * {@code getSupportedValuesLists} for [EV_BATTERY_DISPLAY_UNITS, areaId=0] must return a
+     * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+     * e.g. [WATT_HOUR, AMPERE_HOURS, KILOWATT_HOUR].
+     * At boot, the values in the config array are equal to the supported values list.
+     *
      * If updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
      * then their values must be updated and communicated to the AAOS framework as well.
      *
@@ -1887,6 +1965,8 @@
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleUnit
+     * @require_supported_values_list
+     * @legacy_supported_values_in_config
      * @version 2
      */
     EV_BATTERY_DISPLAY_UNITS = 0x0603 + 0x10000000 + 0x01000000
@@ -1920,17 +2000,13 @@
      *              configArray[2] = KILOMETERS_PER_HOUR
      *
      * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
-     *
      * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
      * (0) must be {@code true}.
-     *
      * {@code getSupportedValuesLists} for [VEHICLE_SPEED_DISPLAY_UNITS, areaId=0] must return a
      * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
      * e.g. [METER_PER_SEC, MILES_PER_HOUR, KILOMETERS_PER_HOUR].
-     *
      * At boot, the values in the config array are equal to the supported values list.
      *
-     *
      * If updating VEHICLE_SPEED_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS
      * properties, then their values must be updated and communicated to the AAOS framework as well.
      *
@@ -2357,11 +2433,21 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the door is closed. The minInt32Value must be 0.
+     *
      * The maxInt32Value indicates the door is fully open.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * closed and fully open positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * Some vehicles (minivans) can open the door electronically. Hence, the
@@ -2373,6 +2459,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     DOOR_POS = 0x0B00 + 0x10000000 + 0x06000000
@@ -2383,13 +2470,23 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the door while opening.
      * The minInt32Value represents the maximum movement speed of the door while closing.
      *
+     * The maxInt32Value represents the maximum movement speed of the door while opening.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is
      * currently 0, then that means there is no movement currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2399,6 +2496,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     DOOR_MOVE = 0x0B01 + 0x10000000 + 0x06000000
@@ -2443,13 +2541,26 @@
      *
      * The minInt32Value indicates the mirror is tilted completely downwards. This must be a
      * non-positive value.
+     *
      * The maxInt32Value indicates the mirror is tilted completely upwards. This must be a
      * non-negative value.
+     *
      * 0 indicates the mirror is not tilted in either direction.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * fully downward and fully upwards positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+     * the fully downward and fully upwards positions.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2458,6 +2569,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     MIRROR_Z_POS = 0x0B40 + 0x10000000 + 0x04000000
@@ -2468,14 +2580,24 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.
      * The minInt32Value represents the maximum movement speed of the mirror while tilting
      * downwards.
      *
+     * The maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value
      * is currently 0, then that means there is no movement currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2485,6 +2607,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     MIRROR_Z_MOVE = 0x0B41 + 0x10000000 + 0x04000000
@@ -2497,13 +2620,26 @@
      *
      * The minInt32Value indicates the mirror is tilted completely to the left. This must be a
      * non-positive value.
+     *
      * The maxInt32Value indicates the mirror is tilted completely to the right. This must be a
      * non-negative value.
+     *
      * 0 indicates the mirror is not tilted in either direction.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * left extreme and right extreme positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+     * the fully downward and fully upwards positions.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2512,6 +2648,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     MIRROR_Y_POS = 0x0B42 + 0x10000000 + 0x04000000
@@ -2522,13 +2659,23 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the mirror while tilting right.
      * The minInt32Value represents the maximum movement speed of the mirror while tilting left.
      *
+     * The maxInt32Value represents the maximum movement speed of the mirror while tilting right.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value
      * is currently 0, then that means there is no movement currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2538,6 +2685,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     MIRROR_Y_MOVE = 0x0B43 + 0x10000000 + 0x04000000
@@ -2614,17 +2762,30 @@
     /**
      * Seat memory select
      *
-     * This parameter selects the memory preset to use to select the seat position. The
-     * maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between
-     * minInt32Value and maxInt32Value must be supported. The minInt32Value is always 0, and the
-     * maxInt32Value determines the number of seat preset memory slots available (i.e.
-     * numSeatPresets - 1).
+     * This parameter selects the memory preset to use to select the seat position.
+     *
+     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
+     *
+     * All integers between minInt32Value and maxInt32Value must be supported.
+     *
+     * The minInt32Value is always 0, and the maxInt32Value determines the number of seat preset
+     * memory slots available (i.e. numSeatPresets - 1).
      *
      * For instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When
      * the user wants to select a preset, the desired preset number (0, 1, or 2) is set.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.WRITE
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_MEMORY_SELECT = 0x0B80 + 0x10000000 + 0x05000000
@@ -2633,12 +2794,24 @@
      * Seat memory set
      *
      * This setting allows the user to save the current seat position settings into the selected
-     * preset slot. The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The
-     * minInt32Value must be 0, and the maxInt32Value for each seat position must match the
+     * preset slot.
+     *
+     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
+     *
+     * The minInt32Value must be 0, and the maxInt32Value for each seat position must match the
      * maxInt32Value for SEAT_MEMORY_SELECT.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.WRITE
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_MEMORY_SET = 0x0B81 + 0x10000000 + 0x05000000
@@ -2670,11 +2843,22 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the seat belt's shoulder anchor is at its lowest position.
+     *
      * The maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * lowest and highest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+     * the lowest and highest positions. All integers between minSupportedValue and
+     * maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue,
+     * maxInt32Value is equal to maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2683,6 +2867,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_BELT_HEIGHT_POS = 0x0B83 + 0x10000000 + 0x05000000
@@ -2693,16 +2878,26 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor
-     * while moving upwards.
      * The minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor
      * while moving downwards.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor
+     * while moving upwards.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat belt reaches the positional limit, the value must reset to 0. If
      * SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently
      * occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2712,6 +2907,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_BELT_HEIGHT_MOVE = 0x0B84 + 0x10000000 + 0x05000000
@@ -2725,11 +2921,21 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the seat is at its rearward-most linear position.
+     *
      * The maxInt32Value indicates the seat is at its forward-most linear position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * closest and farthest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2738,6 +2944,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_FORE_AFT_POS = 0x0B85 + 0x10000000 + 0x05000000
@@ -2750,13 +2957,23 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat while moving forward.
      * The minInt32Value represents the maximum movement speed of the seat while moving backward.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat while moving forward.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's
      * value is currently 0, then that means there is no movement currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2766,6 +2983,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_FORE_AFT_MOVE = 0x0B86 + 0x10000000 + 0x05000000
@@ -2780,12 +2998,24 @@
      *
      * The minInt32Value indicates the seat backrest's full recline position w.r.t the
      * actuator at the bottom of the seat.
+     *
      * The maxInt32Value indicates the seat backrest's most upright/forward position w.r.t the
      * actuator at the bottom of the seat.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * full recline and upright/forward positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+     * the full recline and upright/forward positions.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2794,6 +3024,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_BACKREST_ANGLE_1_POS = 0x0B87 + 0x10000000 + 0x05000000
@@ -2804,15 +3035,25 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
+     * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
+     *
      * The maxInt32Value represents the maximum movement speed of the seat backrest while angling
      * forward.
-     * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
      *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat backrest reaches the positional limit, the value must reset to 0. If
      * SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2822,6 +3063,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_BACKREST_ANGLE_1_MOVE = 0x0B88 + 0x10000000 + 0x05000000
@@ -2837,6 +3079,7 @@
      * The minInt32Value indicates the seat backrest's full recline position w.r.t the next
      * actuator in the backrest from the one at the bottom of the seat (see
      * SEAT_BACKREST_ANGLE_1_POS for additional details).
+     *
      * The maxInt32Value indicates the seat backrest's most upright/forward position w.r.t the
      * next actuator in the backrest from the one at the bottom of the seat(see
      * SEAT_BACKREST_ANGLE_1_POS for additional details).
@@ -2844,6 +3087,17 @@
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * full recline and upright/forward positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} ihas the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+     * the full recline and upright/forward positions.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2852,6 +3106,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_BACKREST_ANGLE_2_POS = 0x0B89 + 0x10000000 + 0x05000000
@@ -2862,15 +3117,25 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
+     * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
+     *
      * The maxInt32Value represents the maximum movement speed of the seat backrest while angling
      * forward.
-     * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
      *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat backrest reaches the positional limit, the value must reset to 0. If
      * SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2880,6 +3145,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_BACKREST_ANGLE_2_MOVE = 0x0B8A + 0x10000000 + 0x05000000
@@ -2891,11 +3157,22 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the seat is in its lowest position.
+     *
      * The maxInt32Value indicates the seat is in its highest position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * lowest and highest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * position.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2904,6 +3181,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEIGHT_POS = 0x0B8B + 0x10000000 + 0x05000000
@@ -2914,13 +3192,23 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat while moving upward.
      * The minInt32Value represents the maximum movement speed of the seat while moving downward.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat while moving upward.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value
      * is currently 0, then that means there is no movement currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2930,6 +3218,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEIGHT_MOVE = 0x0B8C + 0x10000000 + 0x05000000
@@ -2945,12 +3234,22 @@
      * The minInt32Value indicates the seat is in its shallowest position (i.e. the position with
      * the smallest distance between the front edge of the seat cushion and the rear end of the
      * seat).
+     *
      * The maxInt32Value indicates the seat is in its deepest position (i.e. the position with the
      * largest distance between the front edge of the seat cushion and the rear end of the seat).
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * shallowest and deepest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2959,6 +3258,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_DEPTH_POS = 0x0B8D + 0x10000000 + 0x05000000
@@ -2969,14 +3269,24 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat while getting deeper
      * The minInt32Value represents the maximum movement speed of the seat while getting shallower.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat while getting deeper.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat backrest reaches the positional limit, the value must reset to 0. If
      * SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently
      * occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -2986,6 +3296,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_DEPTH_MOVE = 0x0B8E + 0x10000000 + 0x05000000
@@ -2999,6 +3310,7 @@
      * The minInt32Value indicates the seat bottom is angled at its lowest angular position. This
      * corresponds to the seat's front edge at its lowest possible position relative to the rear
      * end of the seat.
+     *
      * The maxInt32Value indicates the seat bottom is angled at its highest angular position. This
      * corresponds to the seat's front edge at its highest possible position relative to the rear
      * end of the seat.
@@ -3006,6 +3318,15 @@
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * lowest and highest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3014,6 +3335,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_TILT_POS = 0x0B8F + 0x10000000 + 0x05000000
@@ -3024,15 +3346,25 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the front edge of the seat while
-     * moving upward.
      * The minInt32Value represents the maximum movement speed of the front edge of the seat while
      * moving downward.
      *
+     * The maxInt32Value represents the maximum movement speed of the front edge of the seat while
+     * moving upward.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's
      * value is currently 0, then that means there is no movement currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3042,6 +3374,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_TILT_MOVE = 0x0B90 + 0x10000000 + 0x05000000
@@ -3054,12 +3387,22 @@
      *
      * The minInt32Value indicates the lumbar support is in its rearward most position (i.e. least
      * supportive position).
+     *
      * The maxInt32Value indicates the lumbar support is in its forward most position (i.e. most
      * supportive position).
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * forward and rearward positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3068,6 +3411,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_LUMBAR_FORE_AFT_POS = 0x0B91 + 0x10000000 + 0x05000000
@@ -3078,16 +3422,26 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat's lumbar support while
-     * moving forward.
      * The minInt32Value represents the maximum movement speed of the seat's lumbar support while
      * moving backward.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat's lumbar support while
+     * moving forward.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat's lumbar support reaches the positional limit, the value must reset to 0. If
      * SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3097,6 +3451,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_LUMBAR_FORE_AFT_MOVE = 0x0B92 + 0x10000000 + 0x05000000
@@ -3109,12 +3464,22 @@
      *
      * The minInt32Value indicates the lumbar side support is in its thinnest position (i.e.
      * most support).
+     *
      * The maxInt32Value indicates the lumbar side support is in its widest position (i.e.
      * least support).
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * thinnest and widest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3123,6 +3488,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_LUMBAR_SIDE_SUPPORT_POS = 0x0B93 + 0x10000000 + 0x05000000
@@ -3133,16 +3499,26 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat's lumbar side support
-     * while getting wider.
      * The minInt32Value represents the maximum movement speed of the seat's lumbar side support
      * while getting thinner.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat's lumbar side support
+     * while getting wider.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat's lumbar side support reaches the positional limit, the value must reset to 0. If
      * SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3152,6 +3528,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_LUMBAR_SIDE_SUPPORT_MOVE = 0x0B94 + 0x10000000 + 0x05000000
@@ -3188,11 +3565,21 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the headrest is in its lowest position.
+     *
      * The maxInt32Value indicates the headrest is in its highest position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * lowest and highest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3201,6 +3588,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEADREST_HEIGHT_POS_V2 =
@@ -3212,16 +3600,26 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
-     * up.
      * The minInt32Value represents the maximum movement speed of the seat's headrest while moving
      * down.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
+     * up.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat's headrest reaches the positional limit, the value must reset to 0. If
      * SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3231,6 +3629,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEADREST_HEIGHT_MOVE = 0x0B96 + 0x10000000 + 0x05000000
@@ -3242,11 +3641,21 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the headrest is in its full recline position.
+     *
      * The maxInt32Value indicates the headrest is in its most upright/forward position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * full recline and most upright/forward positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3255,6 +3664,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEADREST_ANGLE_POS = 0x0B97 + 0x10000000 + 0x05000000
@@ -3265,16 +3675,26 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
-     * into an upright/forward position.
      * The minInt32Value represents the maximum movement speed of the seat's headrest while moving
      * into a shallow position.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
+     * into an upright/forward position.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat's headrest reaches the positional limit, the value must reset to 0. If
      * SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3284,6 +3704,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEADREST_ANGLE_MOVE = 0x0B98 + 0x10000000 + 0x05000000
@@ -3295,11 +3716,21 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the headrest is in its rearward-most linear position.
+     *
      * The maxInt32Value indicates the headrest is in its forward-most linear position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * forward and rearward positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3308,6 +3739,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEADREST_FORE_AFT_POS = 0x0B99 + 0x10000000 + 0x05000000
@@ -3318,16 +3750,26 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
-     * forward.
      * The minInt32Value represents the maximum movement speed of the seat's headrest while moving
      * backward.
      *
+     * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
+     * forward.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat's headrest reaches the positional limit, the value must reset to 0. If
      * SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3337,6 +3779,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_HEADREST_FORE_AFT_MOVE = 0x0B9A + 0x10000000 + 0x05000000
@@ -3356,6 +3799,11 @@
      * For each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightState are supported.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+     * unless all enum values of VehicleLightState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
@@ -3378,6 +3826,11 @@
      * For each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightSwitch are supported.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+     * unless all enum values of VehicleLightSwitch are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
      *
@@ -3443,6 +3896,12 @@
      * all states of VehicleAirbagLocation are supported (including OTHER, which is not
      * recommended).
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+     * unless all states of VehicleAirbagLocation are supported (including OTHER, which is not
+     * recommended).
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleAirbagLocation
@@ -3456,14 +3915,24 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the seat cushion side support is in its widest position (i.e.
-     * least support).
      * The minInt32Value indicates the seat cushion side support is in its thinnest position (i.e.
      * most support).
      *
+     * The maxInt32Value indicates the seat cushion side support is in its widest position (i.e.
+     * least support).
+     *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * thinnest and widest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3472,6 +3941,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_CUSHION_SIDE_SUPPORT_POS =
@@ -3482,16 +3952,26 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value represents the maximum movement speed of the seat cushion side support when
-     * growing wider (i.e. support is decreasing).
      * The minInt32Value represents the maximum movement speed of the seat cushion side support when
      * growing thinner (i.e. support is increasing).
      *
+     * The maxInt32Value represents the maximum movement speed of the seat cushion side support when
+     * growing wider (i.e. support is decreasing).
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat cushion side support reaches the positional limit, the value must reset to 0. If
      * SEAT_CUSHION_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3501,6 +3981,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_CUSHION_SIDE_SUPPORT_MOVE =
@@ -3511,12 +3992,22 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the lumbar support's highest position.
      * The minInt32Value indicates the lumbar support's lowest position.
      *
+     * The maxInt32Value indicates the lumbar support's highest position.
+     *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * lowest and highest positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3525,6 +4016,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_LUMBAR_VERTICAL_POS =
@@ -3535,14 +4027,24 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the lumbar support is moving at the fastest upward speed.
      * The minInt32Value indicates the lumbar support is moving at the fastest downward speed.
      *
+     * The maxInt32Value indicates the lumbar support is moving at the fastest upward speed.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the seat cushion side support reaches the positional limit, the value must reset to 0. If
      * SEAT_LUMBAR_VERTICAL_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3552,6 +4054,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_LUMBAR_VERTICAL_MOVE =
@@ -3563,11 +4066,21 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the normal seat position. The minInt32Value must be 0.
+     *
      * The maxInt32Value indicates the seat is in the full walk-in position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * normal and walk-in positions.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * The area ID must match the seat that actually moves when the walk-in feature activates, not
@@ -3579,6 +4092,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     SEAT_WALK_IN_POS =
@@ -3619,6 +4133,7 @@
      * Window Position
      *
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined.
+     *
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates the window is closed/fully open out of plane. If the window
@@ -3626,6 +4141,7 @@
      * and must be 0. If the window can open out of plane, the minInt32Value indicates the window
      * is fully open in its position out of plane and will be a negative value. See the example
      * below for a more detailed explanation.
+     *
      * The maxInt32Value indicates the window is fully open.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
@@ -3642,12 +4158,22 @@
      *
      *    Note that in this mode, 0 indicates the window is closed.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     WINDOW_POS = 0x0BC0 + 0x10000000 + 0x03000000
@@ -3658,11 +4184,12 @@
      * The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
      * between minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the window is opening in plane/closing in the out of plane
-     * direction at the fastest speed.
      * The minInt32Value indicates the window is closing in plane/opening in the out of plane
      * direction at the fastest speed.
      *
+     * The maxInt32Value indicates the window is opening in plane/closing in the out of plane
+     * direction at the fastest speed.
+     *
      * Larger absolute values, either positive or negative, indicate a faster movement speed. Once
      * the window reaches the positional limit, the value must reset to 0. If WINDOW_MOVE's value is
      * currently 0, then that means there is no movement currently occurring.
@@ -3685,12 +4212,22 @@
      *   Max = open the sunroof, automatically stop when sunroof is fully open.
      *   Min = open the vent, automatically stop when vent is fully open.
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     WINDOW_MOVE = 0x0BC1 + 0x10000000 + 0x03000000
@@ -3720,13 +4257,25 @@
      * When an intermittent wiper setting is selected, this property value must be set to 0 during
      * the "pause" period of the intermittent wiping.
      *
-     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The maxInt32Value
-     * for each area ID must specify the longest wiper period. The minInt32Value must be set to 0
-     * for each area ID.
+     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
+     *
+     * The minInt32Value must be set to 0 for each area ID.
+     *
+     * The maxInt32Value for each area ID must specify the longest wiper period.
+     *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
      *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @unit VehicleUnit.MILLI_SECS
+     * @require_min_max_supported_value
      * @version 2
      */
     WINDSHIELD_WIPERS_PERIOD =
@@ -3746,6 +4295,12 @@
      * unless all states in WindshieldWipersState are supported (including OTHER, which is not
      * recommended).
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+     * unless all states in WindshieldWipersState are supported (including OTHER, which is not
+     * recommended).
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum WindshieldWipersState
@@ -3765,6 +4320,12 @@
      * unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not
      * recommended).
      *
+     * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+     * unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not
+     * recommended).
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
      *
@@ -3789,12 +4350,22 @@
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between
      * minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the steering wheel position furthest from the driver.
      * The minInt32Value indicates the steering wheel position closest to the driver.
      *
+     * The maxInt32Value indicates the steering wheel position furthest from the driver.
+     *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * closest and furthest positions.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3803,6 +4374,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     STEERING_WHEEL_DEPTH_POS =
@@ -3813,14 +4385,24 @@
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between
      * minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the steering wheel moving away from the driver.
      * The minInt32Value indicates the steering wheel moving towards the driver.
      *
+     * The maxInt32Value indicates the steering wheel moving away from the driver.
+     *
      * Larger integers, either positive or negative, indicate a faster movement speed. Once the
      * steering wheel reaches the positional limit, the value must reset to 0. If
      * STEERING_WHEEL_DEPTH_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3830,6 +4412,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     STEERING_WHEEL_DEPTH_MOVE =
@@ -3840,12 +4423,22 @@
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between
      * minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the steering wheel being in the highest position.
      * The minInt32Value indicates the steering wheel being in the lowest position.
      *
+     * The maxInt32Value indicates the steering wheel being in the highest position.
+     *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * lowest and highest positions.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3854,6 +4447,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     STEERING_WHEEL_HEIGHT_POS =
@@ -3864,14 +4458,24 @@
      * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All values between
      * minInt32Value and maxInt32Value must be supported.
      *
-     * The maxInt32Value indicates the steering wheel moving upwards.
      * The minInt32Value indicates the steering wheel moving downwards.
      *
+     * The maxInt32Value indicates the steering wheel moving upwards.
+     *
      * Larger integers, either positive or negative, indicate a faster movement speed. Once the
      * steering wheel reaches the positional limit, the value must reset to 0. If
      * STEERING_WHEEL_HEIGHT_MOVE's value is currently 0, then that means there is no movement
      * currently occurring.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative movement
      * speeds.
      *
@@ -3881,6 +4485,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     STEERING_WHEEL_HEIGHT_MOVE =
@@ -3939,11 +4544,21 @@
      * All integers between minInt32Value and maxInt32Value must be supported.
      *
      * The minInt32Value indicates that the glove box door is closed. The minInt32Value must be 0.
+     *
      * The maxInt32Value indicates that the glove box door is in the fully open position.
      *
      * Values in between minInt32Value and maxInt32Value indicate a transition state between the
      * closed and fully open positions.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+     * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true}.
+     * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+     * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+     * All integers between minSupportedValue and maxSupportedValue must be supported.
+     * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+     * maxSupportedValue.
+     *
      * This property is not in any particular unit but in a specified range of relative positions.
      *
      * The area ID must match the seat by which the glove box is intended to be used  (e.g. if the
@@ -3956,6 +4571,7 @@
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ_WRITE
      * @access VehiclePropertyAccess.READ
+     * @require_min_max_supported_value
      * @version 2
      */
     GLOVE_BOX_DOOR_POS =
@@ -4530,6 +5146,11 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all enum values of VehicleLightState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleLightState
@@ -4552,6 +5173,11 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of VehicleLightSwitch are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all enum values of VehicleLightSwitch are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
      * implement it as VehiclePropertyAccess.READ only.
      *
@@ -5576,6 +6202,11 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined
      * unless all states of VehicleAutonomousState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all enum values of VehicleAutonomousState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum VehicleAutonomousState
@@ -5703,6 +6334,12 @@
      * unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum AutomaticEmergencyBrakingState
@@ -5745,6 +6382,12 @@
      * unless all states of both ForwardCollisionWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both ForwardCollisionWarningState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum ForwardCollisionWarningState
@@ -5787,6 +6430,12 @@
      * unless all states of both BlindSpotWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both BlindSpotWarningState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum BlindSpotWarningState
@@ -5830,6 +6479,12 @@
      * unless all states of both LaneDepartureWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both LaneDepartureWarningState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LaneDepartureWarningState
@@ -5880,6 +6535,12 @@
      * unless all states of both LaneKeepAssistState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both LaneKeepAssistState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LaneKeepAssistState
@@ -5932,6 +6593,11 @@
      * For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
      * all enum values of LaneCenteringAssistCommand are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all enum values of LaneCenteringAssistCommand are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * When this property is not available because LCA is disabled (i.e.
      * LANE_CENTERING_ASSIST_ENABLED is false), this property must return
      * StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the
@@ -5962,6 +6628,12 @@
      * unless all states of both LaneCenteringAssistState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both LaneCenteringAssistState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LaneCenteringAssistState
@@ -6007,6 +6679,12 @@
      * unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended)
      * and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended)
+     * and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum EmergencyLaneKeepAssistState
@@ -6054,6 +6732,12 @@
      * unless all states of CruiseControlType (including OTHER, which is not recommended) and
      * ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of CruiseControlType (including OTHER, which is not recommended) and
+     * ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * Trying to write CruiseControlType#OTHER or an ErrorState to this property will throw an
      * IllegalArgumentException.
      *
@@ -6082,6 +6766,12 @@
      * unless all states of CruiseControlState (including OTHER, which is not recommended) and
      * ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of CruiseControlState (including OTHER, which is not recommended) and
+     * ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum CruiseControlState
@@ -6100,6 +6790,11 @@
      * unless all states of CruiseControlState are supported. Any unsupported commands sent through
      * this property must return StatusCode#INVALID_ARG.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of CruiseControlState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * When this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is
      * false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE
      * is implemented and the state is set to an ErrorState value, then this property must return a
@@ -6240,6 +6935,12 @@
      * unless all states of both HandsOnDetectionDriverState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both HandsOnDetectionDriverState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum HandsOnDetectionDriverState
@@ -6263,6 +6964,12 @@
      * unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended)
      * and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended)
+     * and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum HandsOnDetectionWarning
@@ -6313,6 +7020,12 @@
      * unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDrowsinessAttentionState
@@ -6360,6 +7073,12 @@
      * unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDrowsinessAttentionWarning
@@ -6408,6 +7127,12 @@
      * unless all states of both DriverDistractionState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both DriverDistractionState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDistractionState
@@ -6454,6 +7179,12 @@
      * unless all states of both DriverDistractionWarning (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both DriverDistractionWarning (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum DriverDistractionWarning
@@ -6503,6 +7234,12 @@
      * unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LowSpeedCollisionWarningState
@@ -6546,6 +7283,12 @@
      * unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not
      * recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not
+     * recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum CrossTrafficMonitoringWarningState
@@ -6600,6 +7343,12 @@
      * unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is
      * not recommended) and ErrorState are supported.
      *
+     * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+     * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+     * unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is
+     * not recommended) and ErrorState are supported.
+     * At boot, the supported values list is the same as supportedEnumValues.
+     *
      * @change_mode VehiclePropertyChangeMode.ON_CHANGE
      * @access VehiclePropertyAccess.READ
      * @data_enum LowSpeedAutomaticEmergencyBrakingState
diff --git a/biometrics/face/aidl/default/apex/Android.bp b/biometrics/face/aidl/default/apex/Android.bp
index c4632d4..0561145 100644
--- a/biometrics/face/aidl/default/apex/Android.bp
+++ b/biometrics/face/aidl/default/apex/Android.bp
@@ -19,7 +19,7 @@
 apex {
     name: "com.android.hardware.biometrics.face.virtual",
     manifest: "manifest.json",
-    file_contexts: "file_contexts",
+    file_contexts: ":com.android.biometrics.virtual.face-file_contexts",
     key: "com.android.hardware.key",
     certificate: ":com.android.hardware.certificate",
     updatable: false,
diff --git a/biometrics/face/aidl/default/apex/file_contexts b/biometrics/face/aidl/default/apex/file_contexts
deleted file mode 100644
index 4f935c1..0000000
--- a/biometrics/face/aidl/default/apex/file_contexts
+++ /dev/null
@@ -1,3 +0,0 @@
-(/.*)?                                          u:object_r:vendor_file:s0
-/etc(/.*)?                                      u:object_r:vendor_configs_file:s0
-/bin/hw/android\.hardware\.biometrics\.face-service\.example u:object_r:hal_face_default_exec:s0
\ No newline at end of file
diff --git a/graphics/composer/aidl/vts/ReadbackVts.cpp b/graphics/composer/aidl/vts/ReadbackVts.cpp
index 9d5928d..b45c8c0 100644
--- a/graphics/composer/aidl/vts/ReadbackVts.cpp
+++ b/graphics/composer/aidl/vts/ReadbackVts.cpp
@@ -37,6 +37,12 @@
     writer.setLayerBlendMode(mDisplay, mLayer, mBlendMode);
     writer.setLayerBrightness(mDisplay, mLayer, mBrightness);
     writer.setLayerDataspace(mDisplay, mLayer, mDataspace);
+    Luts luts{
+            .pfd = ::ndk::ScopedFileDescriptor(dup(mLuts.pfd.get())),
+            .offsets = mLuts.offsets,
+            .lutProperties = mLuts.lutProperties,
+    };
+    writer.setLayerLuts(mDisplay, mLayer, luts);
 }
 
 std::string ReadbackHelper::getColorModeString(ColorMode mode) {
@@ -103,6 +109,24 @@
     layerSettings.geometry.positionTransform = scale * translation;
     layerSettings.whitePointNits = mWhitePointNits;
     layerSettings.sourceDataspace = static_cast<::android::ui::Dataspace>(mDataspace);
+    if (mLuts.pfd.get() >= 0 && mLuts.offsets) {
+        std::vector<int32_t> dimensions;
+        std::vector<int32_t> sizes;
+        std::vector<int32_t> keys;
+        dimensions.reserve(mLuts.lutProperties.size());
+        sizes.reserve(mLuts.lutProperties.size());
+        keys.reserve(mLuts.lutProperties.size());
+
+        for (auto& l : mLuts.lutProperties) {
+            dimensions.emplace_back(static_cast<int32_t>(l.dimension));
+            sizes.emplace_back(static_cast<int32_t>(l.size));
+            keys.emplace_back(static_cast<int32_t>(l.samplingKeys[0]));
+        }
+
+        layerSettings.luts = std::make_shared<::android::gui::DisplayLuts>(
+                ::android::base::unique_fd(dup(mLuts.pfd.get())), *mLuts.offsets, dimensions, sizes,
+                keys);
+    }
 
     return layerSettings;
 }
diff --git a/graphics/composer/aidl/vts/ReadbackVts.h b/graphics/composer/aidl/vts/ReadbackVts.h
index e3b2384..c04e37a 100644
--- a/graphics/composer/aidl/vts/ReadbackVts.h
+++ b/graphics/composer/aidl/vts/ReadbackVts.h
@@ -17,6 +17,7 @@
 #pragma once
 
 #include <aidl/android/hardware/graphics/composer3/IComposerClient.h>
+#include <aidl/android/hardware/graphics/composer3/Luts.h>
 #include <android-base/unique_fd.h>
 #include <android/hardware/graphics/composer3/ComposerClientReader.h>
 #include <android/hardware/graphics/composer3/ComposerClientWriter.h>
@@ -26,6 +27,8 @@
 #include "GraphicsComposerCallback.h"
 #include "VtsComposerClient.h"
 
+using aidl::android::hardware::graphics::composer3::Luts;
+
 namespace aidl::android::hardware::graphics::composer3::vts {
 
 using ::android::renderengine::LayerSettings;
@@ -80,6 +83,7 @@
     void setTransform(Transform transform) { mTransform = transform; }
     void setAlpha(float alpha) { mAlpha = alpha; }
     void setBlendMode(BlendMode blendMode) { mBlendMode = blendMode; }
+    void setLuts(Luts luts) { mLuts = std::move(luts); }
 
     BlendMode getBlendMode() const { return mBlendMode; }
 
@@ -105,6 +109,7 @@
     BlendMode mBlendMode = BlendMode::NONE;
     uint32_t mZOrder = 0;
     Dataspace mDataspace = Dataspace::UNKNOWN;
+    Luts mLuts;
 };
 
 class TestColorLayer : public TestLayer {
diff --git a/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_ReadbackTest.cpp b/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_ReadbackTest.cpp
index 0561b30..6883cdb 100644
--- a/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_ReadbackTest.cpp
+++ b/graphics/composer/aidl/vts/VtsHalGraphicsComposer3_ReadbackTest.cpp
@@ -20,6 +20,7 @@
 #include <aidl/Vintf.h>
 #include <aidl/android/hardware/graphics/common/BufferUsage.h>
 #include <aidl/android/hardware/graphics/composer3/IComposer.h>
+#include <cutils/ashmem.h>
 #include <gtest/gtest.h>
 #include <ui/DisplayId.h>
 #include <ui/DisplayIdentification.h>
@@ -527,6 +528,119 @@
     }
 }
 
+void generateLuts(Luts* luts, LutProperties::Dimension dimension, int32_t size,
+                  LutProperties::SamplingKey key) {
+    size_t bufferSize = dimension == LutProperties::Dimension::ONE_D
+                                ? static_cast<size_t>(size) * sizeof(float)
+                                : static_cast<size_t>(size * size * size) * sizeof(float);
+    int32_t fd = ashmem_create_region("lut_shared_mem", bufferSize);
+    void* ptr = mmap(nullptr, bufferSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+    std::vector<float> buffers(static_cast<size_t>(size), 0.5f);
+    memcpy(ptr, buffers.data(), bufferSize);
+    munmap(ptr, bufferSize);
+    luts->pfd = ndk::ScopedFileDescriptor(fd);
+    luts->offsets = std::vector<int32_t>{0};
+    luts->lutProperties = {LutProperties{dimension, size, {key}}};
+}
+
+// @VsrTest = 4.4-016
+TEST_P(GraphicsCompositionTest, Luts) {
+    ASSERT_TRUE(
+            mComposerClient->setClientTargetSlotCount(getPrimaryDisplayId(), kClientTargetSlotCount)
+                    .isOk());
+    const auto& [status, properties] = mComposerClient->getOverlaySupport();
+    if (!status.isOk() && status.getExceptionCode() == EX_SERVICE_SPECIFIC &&
+        status.getServiceSpecificError() == IComposerClient::EX_UNSUPPORTED) {
+        GTEST_SKIP() << "getOverlaySupport is not supported";
+        return;
+    }
+
+    if (!properties.lutProperties) {
+        GTEST_SKIP() << "lutProperties is not supported";
+        return;
+    }
+
+    for (const auto& lutProperties : *properties.lutProperties) {
+        if (!lutProperties) {
+            continue;
+        }
+        auto& l = *lutProperties;
+
+        for (const auto& key : l.samplingKeys) {
+            for (ColorMode mode : mTestColorModes) {
+                EXPECT_TRUE(mComposerClient
+                                    ->setColorMode(getPrimaryDisplayId(), mode,
+                                                   RenderIntent::COLORIMETRIC)
+                                    .isOk());
+
+                bool isSupported;
+                ASSERT_NO_FATAL_FAILURE(isSupported = getHasReadbackBuffer());
+                if (!isSupported) {
+                    GTEST_SUCCEED()
+                            << "Readback not supported or unsupported pixelFormat/dataspace";
+                    return;
+                }
+
+                common::Rect coloredSquare({0, 0, getDisplayWidth(), getDisplayHeight()});
+
+                // expected color for each pixel
+                std::vector<Color> expectedColors(
+                        static_cast<size_t>(getDisplayWidth() * getDisplayHeight()));
+                ReadbackHelper::fillColorsArea(expectedColors, getDisplayWidth(), coloredSquare,
+                                               WHITE);
+
+                auto layer = std::make_shared<TestBufferLayer>(
+                        mComposerClient, *mTestRenderEngine, getPrimaryDisplayId(),
+                        getDisplayWidth(), getDisplayHeight(), PixelFormat::RGBA_8888, *mWriter);
+                layer->setDisplayFrame(coloredSquare);
+                layer->setZOrder(10);
+                layer->setDataspace(Dataspace::SRGB);
+
+                Luts luts;
+                generateLuts(&luts, l.dimension, l.size, key);
+                layer->setLuts(std::move(luts));
+
+                ASSERT_NO_FATAL_FAILURE(layer->setBuffer(expectedColors));
+
+                std::vector<std::shared_ptr<TestLayer>> layers = {layer};
+
+                ReadbackBuffer readbackBuffer(getPrimaryDisplayId(), mComposerClient,
+                                              getDisplayWidth(), getDisplayHeight(), mPixelFormat,
+                                              mDataspace);
+                ASSERT_NO_FATAL_FAILURE(readbackBuffer.setReadbackBuffer());
+
+                writeLayers(layers);
+                ASSERT_TRUE(mReader.takeErrors().empty());
+                mWriter->validateDisplay(getPrimaryDisplayId(), ComposerClientWriter::kNoTimestamp,
+                                         VtsComposerClient::kNoFrameIntervalNs);
+                execute();
+                // if hwc cannot handle and asks for composition change,
+                // just succeed the test
+                if (!mReader.takeChangedCompositionTypes(getPrimaryDisplayId()).empty()) {
+                    GTEST_SUCCEED();
+                    return;
+                }
+
+                auto changedCompositionTypes =
+                        mReader.takeChangedCompositionTypes(getPrimaryDisplayId());
+                ASSERT_TRUE(changedCompositionTypes.empty());
+
+                mWriter->presentDisplay(getPrimaryDisplayId());
+                execute();
+                ASSERT_TRUE(mReader.takeErrors().empty());
+
+                ReadbackHelper::fillColorsArea(expectedColors, getDisplayWidth(), coloredSquare,
+                                               {188.f / 255.f, 188.f / 255.f, 188.f / 255.f, 1.0f});
+
+                ASSERT_NO_FATAL_FAILURE(readbackBuffer.checkReadbackBuffer(expectedColors));
+                mTestRenderEngine->setRenderLayers(layers);
+                ASSERT_NO_FATAL_FAILURE(mTestRenderEngine->drawLayers());
+                ASSERT_NO_FATAL_FAILURE(mTestRenderEngine->checkColorBuffer(expectedColors));
+            }
+        }
+    }
+}
+
 TEST_P(GraphicsCompositionTest, MixedColorSpaces) {
     ASSERT_TRUE(
             mComposerClient->setClientTargetSlotCount(getPrimaryDisplayId(), kClientTargetSlotCount)
diff --git a/power/aidl/aidl_api/android.hardware.power/current/android/hardware/power/SupportInfo.aidl b/power/aidl/aidl_api/android.hardware.power/current/android/hardware/power/SupportInfo.aidl
index c90125c..d2fcae2 100644
--- a/power/aidl/aidl_api/android.hardware.power/current/android/hardware/power/SupportInfo.aidl
+++ b/power/aidl/aidl_api/android.hardware.power/current/android/hardware/power/SupportInfo.aidl
@@ -55,5 +55,10 @@
     boolean isGpuSupported;
     int cpuMinIntervalMillis;
     int gpuMinIntervalMillis;
+    int cpuMinCalculationWindowMillis = 50;
+    int cpuMaxCalculationWindowMillis = 10000;
+    int gpuMinCalculationWindowMillis = 50;
+    int gpuMaxCalculationWindowMillis = 10000;
+    int cpuMaxTidCount = 5;
   }
 }
diff --git a/power/aidl/android/hardware/power/CpuHeadroomParams.aidl b/power/aidl/android/hardware/power/CpuHeadroomParams.aidl
index fab8f43..83a46ae 100644
--- a/power/aidl/android/hardware/power/CpuHeadroomParams.aidl
+++ b/power/aidl/android/hardware/power/CpuHeadroomParams.aidl
@@ -35,9 +35,8 @@
     CalculationType calculationType = CalculationType.MIN;
 
     /**
-     * The calculation rolling window size in milliseconds.
-     * The device should support a superset of [50, 10000] and try to use the closest feasible
-     * window size to the provided value param.
+     * The device should support the range specified in SupportInfo#HeadroomSupportInfo and try to
+     * use the closest feasible window size to the provided value param.
      */
     int calculationWindowMillis = 1000;
 
@@ -50,6 +49,8 @@
      * This should handle all the cases including but not limited to core affinity and app cpuset
      * that change the available CPU cores for the caller. And the HAL should check that the TIDs
      * have the same core affinity.
+     *
+     * The device should support the maximum TID count specified SupportInfo#HeadroomSupportInfo.
      */
     int[] tids;
 }
diff --git a/power/aidl/android/hardware/power/GpuHeadroomParams.aidl b/power/aidl/android/hardware/power/GpuHeadroomParams.aidl
index 68848d8..2d64bd3 100644
--- a/power/aidl/android/hardware/power/GpuHeadroomParams.aidl
+++ b/power/aidl/android/hardware/power/GpuHeadroomParams.aidl
@@ -35,8 +35,8 @@
     CalculationType calculationType = CalculationType.MIN;
 
     /**
-     * The device should support a superset of [50, 10000] and try to use the closest feasible
-     * window size to the provided value param.
+     * The device should support the range specified in SupportInfo#HeadroomSupportInfo and try to
+     * use the closest feasible window size to the provided value param.
      */
     int calculationWindowMillis = 1000;
 }
diff --git a/power/aidl/android/hardware/power/SupportInfo.aidl b/power/aidl/android/hardware/power/SupportInfo.aidl
index 55287cb..011dc18 100644
--- a/power/aidl/android/hardware/power/SupportInfo.aidl
+++ b/power/aidl/android/hardware/power/SupportInfo.aidl
@@ -139,5 +139,39 @@
          * than the interval.
          */
         int gpuMinIntervalMillis;
+
+        /**
+         * Minimum calculation window size for getCpuHeadroom in milliseconds.
+         *
+         * This should be no larger than 50ms.
+         */
+        int cpuMinCalculationWindowMillis = 50;
+
+        /**
+         * Maximum calculation window size for getCpuHeadroom in milliseconds.
+         *
+         * This should be no smaller than 10000ms.
+         */
+        int cpuMaxCalculationWindowMillis = 10000;
+
+        /**
+         * Minimum calculation window size for getGpuHeadroom in milliseconds.
+         *
+         * This should be no larger than 50ms.
+         */
+        int gpuMinCalculationWindowMillis = 50;
+
+        /**
+         * Maximum calculation window size for getGpuHeadroom in milliseconds.
+         *
+         * This should be no smaller than 10000ms.
+         */
+        int gpuMaxCalculationWindowMillis = 10000;
+
+        /**
+         * Maximum number of TIDs this device can support.
+         * This should be no smaller than 5.
+         */
+        int cpuMaxTidCount = 5;
     }
 }
diff --git a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl
index ad7473b..be76497 100644
--- a/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl
+++ b/radio/aidl/aidl_api/android.hardware.radio.network/current/android/hardware/radio/network/IRadioNetwork.aidl
@@ -104,7 +104,7 @@
   oneway void setCellularIdentifierTransparencyEnabled(in int serial, in boolean enabled);
   oneway void setSecurityAlgorithmsUpdatedEnabled(in int serial, boolean enable);
   oneway void isSecurityAlgorithmsUpdatedEnabled(in int serial);
-  oneway void setSatellitePlmn(in int serial, in int simSlot, in String[] carrierPlmnArray, in String[] allSatellitePlmnArray);
-  oneway void setSatelliteEnabledForCarrier(in int serial, in int simSlot, boolean satelliteEnabled);
-  oneway void isSatelliteEnabledForCarrier(in int serial, in int simSlot);
+  oneway void setSatellitePlmn(in int serial, in String[] carrierPlmnArray, in String[] allSatellitePlmnArray);
+  oneway void setSatelliteEnabledForCarrier(in int serial, boolean satelliteEnabled);
+  oneway void isSatelliteEnabledForCarrier(in int serial);
 }
diff --git a/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl b/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl
index 2509b6d..dce9865 100644
--- a/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl
+++ b/radio/aidl/android/hardware/radio/network/IRadioNetwork.aidl
@@ -734,8 +734,6 @@
      * satellite LTE service.
      *
      * @param serial Serial number of request
-     * @param simSlot Indicates the SIM slot to which this API will be applied. The modem will use
-     *                this information to determine the relevant carrier.
      * @param carrierPlmnArray Array of roaming PLMN used for connecting to satellite networks
      *                         supported by user subscription.
      * @param allSatellitePlmnArray allSatellitePlmnArray contains all the PLMNs present in
@@ -749,8 +747,8 @@
      *
      * This is available when android.hardware.telephony.radio.access is defined.
      */
-    void setSatellitePlmn(in int serial, in int simSlot, in String[] carrierPlmnArray,
-            in String[] allSatellitePlmnArray);
+    void setSatellitePlmn(
+            in int serial, in String[] carrierPlmnArray, in String[] allSatellitePlmnArray);
 
     /**
      * Enable or disable satellite in the cellular modem associated with a carrier.
@@ -760,25 +758,22 @@
      * If modem is enabled, modem should attach to only PLMNs present in carrierPlmnArray.
      *
      * @param serial Serial number of request
-     * @param simSlot Indicates the SIM slot to which this API will be applied. The modem will use
-     *                this information to determine the relevant carrier.
      * @param satelliteEnabled {@code true} to enable satellite, {@code false} to disable satellite.
      *
      * Response function is IRadioNetworkResponse.setSatelliteEnabledForCarrier()
      *
      * This is available when android.hardware.telephony.radio.access is defined.
      */
-    void setSatelliteEnabledForCarrier(in int serial, in int simSlot, boolean satelliteEnabled);
+    void setSatelliteEnabledForCarrier(in int serial, boolean satelliteEnabled);
 
     /**
      * Check whether satellite is enabled in the cellular modem associated with a carrier.
      *
      * @param serial Serial number of request
-     * @param simSlot Indicates the SIM slot to which this API will be applied.
      *
      * Response function is IRadioNetworkResponse.isSatelliteEnabledForCarrier()
      *
      * This is available when android.hardware.telephony.radio.access is defined.
      */
-    void isSatelliteEnabledForCarrier(in int serial, in int simSlot);
+    void isSatelliteEnabledForCarrier(in int serial);
 }
diff --git a/radio/aidl/compat/libradiocompat/include/libradiocompat/RadioNetwork.h b/radio/aidl/compat/libradiocompat/include/libradiocompat/RadioNetwork.h
index c9a3270..ae76808 100644
--- a/radio/aidl/compat/libradiocompat/include/libradiocompat/RadioNetwork.h
+++ b/radio/aidl/compat/libradiocompat/include/libradiocompat/RadioNetwork.h
@@ -115,11 +115,11 @@
     ::ndk::ScopedAStatus isSecurityAlgorithmsUpdatedEnabled(int32_t serial) override;
 
     ::ndk::ScopedAStatus setSatellitePlmn(
-            int32_t serial, int32_t simSlot, const std::vector<std::string>& carrierPlmnArray,
+            int32_t serial, const std::vector<std::string>& carrierPlmnArray,
             const std::vector<std::string>& allSatellitePlmnArray) override;
-    ::ndk::ScopedAStatus setSatelliteEnabledForCarrier(int32_t serial, int32_t simSlot,
+    ::ndk::ScopedAStatus setSatelliteEnabledForCarrier(int32_t serial,
                                                        bool satelliteEnabled) override;
-    ::ndk::ScopedAStatus isSatelliteEnabledForCarrier(int32_t serial, int32_t simSlot) override;
+    ::ndk::ScopedAStatus isSatelliteEnabledForCarrier(int32_t serial) override;
 
   protected:
     std::shared_ptr<::aidl::android::hardware::radio::network::IRadioNetworkResponse> respond();
diff --git a/radio/aidl/compat/libradiocompat/network/RadioNetwork.cpp b/radio/aidl/compat/libradiocompat/network/RadioNetwork.cpp
index b5aee5c..2359034 100644
--- a/radio/aidl/compat/libradiocompat/network/RadioNetwork.cpp
+++ b/radio/aidl/compat/libradiocompat/network/RadioNetwork.cpp
@@ -403,7 +403,7 @@
 }
 
 ScopedAStatus RadioNetwork::setSatellitePlmn(
-        int32_t serial, int32_t /*simSlot*/, const std::vector<std::string>& /*carrierPlmnArray*/,
+        int32_t serial, const std::vector<std::string>& /*carrierPlmnArray*/,
         const std::vector<std::string>& /*allSatellitePlmnArray*/) {
     LOG_CALL << serial;
     LOG(ERROR) << " setSatellitePlmn is unsupported by HIDL HALs";
@@ -411,15 +411,14 @@
     return ok();
 }
 
-ScopedAStatus RadioNetwork::setSatelliteEnabledForCarrier(int32_t serial, int32_t /*simSlot*/,
-                                                          bool /*enable*/) {
+ScopedAStatus RadioNetwork::setSatelliteEnabledForCarrier(int32_t serial, bool /*enable*/) {
     LOG_CALL << serial;
     LOG(ERROR) << " setSatelliteEnabledForCarrier is unsupported by HIDL HALs";
     respond()->setSatelliteEnabledForCarrierResponse(notSupported(serial));
     return ok();
 }
 
-ScopedAStatus RadioNetwork::isSatelliteEnabledForCarrier(int32_t serial, int32_t /*simSlot*/) {
+ScopedAStatus RadioNetwork::isSatelliteEnabledForCarrier(int32_t serial) {
     LOG_CALL << serial;
     LOG(ERROR) << " isSatelliteEnabledForCarrier is unsupported by HIDL HALs";
     respond()->isSatelliteEnabledForCarrierResponse(notSupported(serial), false);
diff --git a/radio/aidl/vts/radio_network_test.cpp b/radio/aidl/vts/radio_network_test.cpp
index 1778c3f..6b0b33a 100644
--- a/radio/aidl/vts/radio_network_test.cpp
+++ b/radio/aidl/vts/radio_network_test.cpp
@@ -2629,7 +2629,7 @@
     }
 
     serial = GetRandomSerialNumber();
-    radio_network->setSatellitePlmn(serial, 0, {"123456"}, {"123456, 3456789"});
+    radio_network->setSatellitePlmn(serial, {"123456"}, {"123456, 3456789"});
     EXPECT_EQ(std::cv_status::no_timeout, wait());
     EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_network->rspInfo.type);
     EXPECT_EQ(serial, radioRsp_network->rspInfo.serial);
@@ -2654,7 +2654,7 @@
 
     // Get current value
     serial = GetRandomSerialNumber();
-    radio_network->isSatelliteEnabledForCarrier(serial, 0);
+    radio_network->isSatelliteEnabledForCarrier(serial);
     EXPECT_EQ(std::cv_status::no_timeout, wait());
     bool originalSatelliteEnabledSetting = radioRsp_network->isSatelliteEnabledForCarrier;
 
@@ -2663,7 +2663,7 @@
     // for the right default value.
     bool valueToSet = !originalSatelliteEnabledSetting;
     serial = GetRandomSerialNumber();
-    radio_network->setSatelliteEnabledForCarrier(serial, 0, valueToSet);
+    radio_network->setSatelliteEnabledForCarrier(serial, valueToSet);
     EXPECT_EQ(std::cv_status::no_timeout, wait());
     EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_network->rspInfo.type);
     EXPECT_EQ(serial, radioRsp_network->rspInfo.serial);
@@ -2675,7 +2675,7 @@
     if (radioRsp_network->rspInfo.error == RadioError::NONE) {
         // Assert the value has changed
         serial = GetRandomSerialNumber();
-        ndk::ScopedAStatus res = radio_network->isSatelliteEnabledForCarrier(serial, 0);
+        ndk::ScopedAStatus res = radio_network->isSatelliteEnabledForCarrier(serial);
 
         ASSERT_OK(res);
         EXPECT_EQ(std::cv_status::no_timeout, wait());
@@ -2687,7 +2687,7 @@
         EXPECT_EQ(valueToSet, radioRsp_network->isSatelliteEnabledForCarrier);
 
         // Reset original state
-        radio_network->setSatelliteEnabledForCarrier(serial, 0, originalSatelliteEnabledSetting);
+        radio_network->setSatelliteEnabledForCarrier(serial, originalSatelliteEnabledSetting);
         EXPECT_EQ(std::cv_status::no_timeout, wait());
         EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_network->rspInfo.type);
         EXPECT_EQ(serial, radioRsp_network->rspInfo.serial);
diff --git a/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl b/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
index e56c193..7ea5f5d 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/Tag.aidl
@@ -904,6 +904,9 @@
      * Tag::MODULE_HASH specifies the SHA-256 hash of the DER-encoded module information (see
      * KeyCreationResult.aidl for the ASN.1 schema).
      *
+     * KeyStore clients can retrieve the unhashed DER-encoded module information from Android
+     * via KeyStoreManager.getSupplementaryAttestationInfo.
+     *
      * This tag is never provided or returned from KeyMint in the key characteristics. It exists
      * only to define the tag for use in the attestation record.
      *
diff --git a/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp b/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
index 810cc38..66f7539 100644
--- a/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
+++ b/security/rkp/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
@@ -853,7 +853,7 @@
  * is not "green" if and only if the mode on at least one certificate in the DICE chain
  * is non-normal.
  */
-TEST_P(CertificateRequestV2Test, unlockedBootloaderStatesImpliesNonnormalDiceChain) {
+TEST_P(CertificateRequestV2Test, DISABLED_unlockedBootloaderStatesImpliesNonnormalDiceChain) {
     auto challenge = randomBytes(MAX_CHALLENGE_SIZE);
     bytevec csr;
     auto status =
diff --git a/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.cpp b/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.cpp
index 158e4f1..59d9593 100644
--- a/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.cpp
+++ b/tv/tuner/aidl/vts/functional/VtsHalTvTunerTargetTest.cpp
@@ -214,9 +214,7 @@
     ASSERT_TRUE(mFilterTests.startFilter(filterId));
     // tune test
     ASSERT_TRUE(mFrontendTests.tuneFrontend(frontendConf, true /*testWithDemux*/));
-    if (!isPassthroughFilter(filterConf)) {
-        ASSERT_TRUE(filterDataOutputTest());
-    }
+    ASSERT_TRUE(filterDataOutputTest());
     ASSERT_TRUE(mFrontendTests.stopTuneFrontend(true /*testWithDemux*/));
     ASSERT_TRUE(mFilterTests.stopFilter(filterId));
     ASSERT_TRUE(mFilterTests.releaseShareAvHandle(filterId));
@@ -1383,6 +1381,10 @@
     auto live_configs = generateLiveConfigurations();
     for (auto& configuration : live_configs) {
         live = configuration;
+        // shared memory handle is not used by a passthrough filter at all
+        if (isPassthroughFilter(filterMap[live.videoFilterId])) {
+            continue;
+        }
         mediaFilterUsingSharedMemoryTest(filterMap[live.videoFilterId],
                                          frontendMap[live.frontendId]);
     }
diff --git a/virtualization/OWNERS b/virtualization/OWNERS
new file mode 100644
index 0000000..316145b
--- /dev/null
+++ b/virtualization/OWNERS
@@ -0,0 +1 @@
+include platform/packages/modules/Virtualization:/OWNERS
diff --git a/wifi/aidl/default/aidl_struct_util.cpp b/wifi/aidl/default/aidl_struct_util.cpp
index 6bd5a7f..6de150e 100644
--- a/wifi/aidl/default/aidl_struct_util.cpp
+++ b/wifi/aidl/default/aidl_struct_util.cpp
@@ -3883,7 +3883,8 @@
         return false;
     }
     *aidl_scan_result = {};
-    aidl_scan_result->timeStampInUs = ts_us - legacy_scan_result.age_ms * 1000;
+    aidl_scan_result->timeStampInUs =
+            ts_us - (static_cast<uint64_t>(legacy_scan_result.age_ms) * 1000);
     if (aidl_scan_result->timeStampInUs < 0) {
         aidl_scan_result->timeStampInUs = 0;
         return false;
diff --git a/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp b/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp
index 4677952..1ef02af 100644
--- a/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp
+++ b/wifi/aidl/vts/functional/wifi_chip_aidl_test.cpp
@@ -30,6 +30,9 @@
 
 #include "wifi_aidl_test_utils.h"
 
+using aidl::android::hardware::wifi::AfcChannelAllowance;
+using aidl::android::hardware::wifi::AvailableAfcChannelInfo;
+using aidl::android::hardware::wifi::AvailableAfcFrequencyInfo;
 using aidl::android::hardware::wifi::BnWifiChipEventCallback;
 using aidl::android::hardware::wifi::IfaceType;
 using aidl::android::hardware::wifi::IWifiApIface;
@@ -271,6 +274,23 @@
 }
 
 /*
+ * Tests the setAfcChannelAllowance() API.
+ */
+TEST_P(WifiChipAidlTest, SetAfcChannelAllowance) {
+    configureChipForConcurrencyType(IfaceConcurrencyType::STA);
+    int32_t features = getChipFeatureSet(wifi_chip_);
+    AfcChannelAllowance allowance;
+    allowance.availableAfcChannelInfos = std::vector<AvailableAfcChannelInfo>();
+    allowance.availableAfcFrequencyInfos = std::vector<AvailableAfcFrequencyInfo>();
+    auto status = wifi_chip_->setAfcChannelAllowance(allowance);
+    if (features & static_cast<int32_t>(IWifiChip::FeatureSetMask::SET_AFC_CHANNEL_ALLOWANCE)) {
+        EXPECT_TRUE(status.isOk());
+    } else {
+        EXPECT_TRUE(checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED));
+    }
+}
+
+/*
  * SetLatencyMode_normal
  * Tests the setLatencyMode() API with Latency mode NORMAL.
  */
diff --git a/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp b/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp
index d646162..924d74d 100644
--- a/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp
+++ b/wifi/aidl/vts/functional/wifi_nan_iface_aidl_test.cpp
@@ -56,6 +56,8 @@
 using aidl::android::hardware::wifi::NanRespondToDataPathIndicationRequest;
 using aidl::android::hardware::wifi::NanStatus;
 using aidl::android::hardware::wifi::NanStatusCode;
+using aidl::android::hardware::wifi::NanSubscribeRequest;
+using aidl::android::hardware::wifi::NanSubscribeType;
 using aidl::android::hardware::wifi::NanSuspensionModeChangeInd;
 using aidl::android::hardware::wifi::NanTxType;
 using aidl::android::hardware::wifi::RttResult;
@@ -418,7 +420,7 @@
     int interface_version_;
     uint64_t callback_event_bitmap_;
     uint16_t id_;
-    uint8_t session_id_;
+    int8_t session_id_;
     uint32_t ndp_instance_id_;
     uint32_t pairing_instance_id_;
     uint32_t bootstrappping_instance_id_;
@@ -437,6 +439,78 @@
     NanBootstrappingConfirmInd nan_bootstrapping_confirm_ind_;
     NanSuspensionModeChangeInd nan_suspension_mode_change_ind_;
 
+    static NanEnableRequest createNanConfigRequest() {
+        NanBandSpecificConfig config24 = {};
+        config24.rssiClose = 60;
+        config24.rssiMiddle = 70;
+        config24.rssiCloseProximity = 60;
+        config24.dwellTimeMs = 200;
+        config24.scanPeriodSec = 20;
+        config24.validDiscoveryWindowIntervalVal = false;
+        config24.discoveryWindowIntervalVal = 0;
+
+        NanBandSpecificConfig config5 = {};
+        config5.rssiClose = 60;
+        config5.rssiMiddle = 75;
+        config5.rssiCloseProximity = 60;
+        config5.dwellTimeMs = 200;
+        config5.scanPeriodSec = 20;
+        config5.validDiscoveryWindowIntervalVal = false;
+        config5.discoveryWindowIntervalVal = 0;
+
+        NanEnableRequest req = {};
+        req.operateInBand[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] = true;
+        req.operateInBand[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] = false;
+        req.hopCountMax = 2;
+        req.configParams.masterPref = 0;
+        req.configParams.disableDiscoveryAddressChangeIndication = true;
+        req.configParams.disableStartedClusterIndication = true;
+        req.configParams.disableJoinedClusterIndication = true;
+        req.configParams.includePublishServiceIdsInBeacon = true;
+        req.configParams.numberOfPublishServiceIdsInBeacon = 0;
+        req.configParams.includeSubscribeServiceIdsInBeacon = true;
+        req.configParams.numberOfSubscribeServiceIdsInBeacon = 0;
+        req.configParams.rssiWindowSize = 8;
+        req.configParams.macAddressRandomizationIntervalSec = 1800;
+        req.configParams.bandSpecificConfig[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] =
+                config24;
+        req.configParams.bandSpecificConfig[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] =
+                config5;
+
+        req.debugConfigs.validClusterIdVals = true;
+        req.debugConfigs.clusterIdTopRangeVal = 65535;
+        req.debugConfigs.clusterIdBottomRangeVal = 0;
+        req.debugConfigs.validIntfAddrVal = false;
+        req.debugConfigs.validOuiVal = false;
+        req.debugConfigs.ouiVal = 0;
+        req.debugConfigs.validRandomFactorForceVal = false;
+        req.debugConfigs.randomFactorForceVal = 0;
+        req.debugConfigs.validHopCountForceVal = false;
+        req.debugConfigs.hopCountForceVal = 0;
+        req.debugConfigs.validDiscoveryChannelVal = false;
+        req.debugConfigs
+                .discoveryChannelMhzVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] = 0;
+        req.debugConfigs.discoveryChannelMhzVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] =
+                0;
+        req.debugConfigs.validUseBeaconsInBandVal = false;
+        req.debugConfigs.useBeaconsInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] =
+                true;
+        req.debugConfigs.useBeaconsInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] =
+                true;
+        req.debugConfigs.validUseSdfInBandVal = false;
+        req.debugConfigs.useSdfInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] = true;
+        req.debugConfigs.useSdfInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] = true;
+        return req;
+    }
+
+    NanConfigRequestSupplemental createNanConfigRequestSupplemental() {
+        NanConfigRequestSupplemental nanConfigRequestSupp = {};
+        nanConfigRequestSupp.discoveryBeaconIntervalMs = 20;
+        nanConfigRequestSupp.numberOfSpatialStreamsInDiscovery = 0;
+        nanConfigRequestSupp.enableDiscoveryWindowEarlyTermination = false;
+        return nanConfigRequestSupp;
+    }
+
     const char* getInstanceName() { return GetParam().c_str(); }
 
   private:
@@ -446,6 +520,14 @@
 };
 
 /*
+ * GetName
+ */
+TEST_P(WifiNanIfaceAidlTest, GetName) {
+    std::string ifaceName;
+    EXPECT_TRUE(wifi_nan_iface_->getName(&ifaceName).isOk());
+}
+
+/*
  * FailOnIfaceInvalid
  * Ensure that API calls to an interface fail with code ERROR_WIFI_IFACE_INVALID
  * after wifi is disabled.
@@ -566,67 +648,8 @@
  */
 TEST_P(WifiNanIfaceAidlTest, StartPublishRequest) {
     uint16_t inputCmdId = 10;
-    NanBandSpecificConfig config24 = {};
-    config24.rssiClose = 60;
-    config24.rssiMiddle = 70;
-    config24.rssiCloseProximity = 60;
-    config24.dwellTimeMs = 200;
-    config24.scanPeriodSec = 20;
-    config24.validDiscoveryWindowIntervalVal = false;
-    config24.discoveryWindowIntervalVal = 0;
-
-    NanBandSpecificConfig config5 = {};
-    config5.rssiClose = 60;
-    config5.rssiMiddle = 75;
-    config5.rssiCloseProximity = 60;
-    config5.dwellTimeMs = 200;
-    config5.scanPeriodSec = 20;
-    config5.validDiscoveryWindowIntervalVal = false;
-    config5.discoveryWindowIntervalVal = 0;
-
-    NanEnableRequest req = {};
-    req.operateInBand[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] = true;
-    req.operateInBand[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] = false;
-    req.hopCountMax = 2;
-    req.configParams.masterPref = 0;
-    req.configParams.disableDiscoveryAddressChangeIndication = true;
-    req.configParams.disableStartedClusterIndication = true;
-    req.configParams.disableJoinedClusterIndication = true;
-    req.configParams.includePublishServiceIdsInBeacon = true;
-    req.configParams.numberOfPublishServiceIdsInBeacon = 0;
-    req.configParams.includeSubscribeServiceIdsInBeacon = true;
-    req.configParams.numberOfSubscribeServiceIdsInBeacon = 0;
-    req.configParams.rssiWindowSize = 8;
-    req.configParams.macAddressRandomizationIntervalSec = 1800;
-    req.configParams.bandSpecificConfig[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] =
-            config24;
-    req.configParams.bandSpecificConfig[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] =
-            config5;
-
-    req.debugConfigs.validClusterIdVals = true;
-    req.debugConfigs.clusterIdTopRangeVal = 65535;
-    req.debugConfigs.clusterIdBottomRangeVal = 0;
-    req.debugConfigs.validIntfAddrVal = false;
-    req.debugConfigs.validOuiVal = false;
-    req.debugConfigs.ouiVal = 0;
-    req.debugConfigs.validRandomFactorForceVal = false;
-    req.debugConfigs.randomFactorForceVal = 0;
-    req.debugConfigs.validHopCountForceVal = false;
-    req.debugConfigs.hopCountForceVal = 0;
-    req.debugConfigs.validDiscoveryChannelVal = false;
-    req.debugConfigs.discoveryChannelMhzVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] = 0;
-    req.debugConfigs.discoveryChannelMhzVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] = 0;
-    req.debugConfigs.validUseBeaconsInBandVal = false;
-    req.debugConfigs.useBeaconsInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] = true;
-    req.debugConfigs.useBeaconsInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] = true;
-    req.debugConfigs.validUseSdfInBandVal = false;
-    req.debugConfigs.useSdfInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_24GHZ)] = true;
-    req.debugConfigs.useSdfInBandVal[static_cast<int32_t>(NanBandIndex::NAN_BAND_5GHZ)] = true;
-
-    NanConfigRequestSupplemental nanConfigRequestSupp = {};
-    nanConfigRequestSupp.discoveryBeaconIntervalMs = 20;
-    nanConfigRequestSupp.numberOfSpatialStreamsInDiscovery = 0;
-    nanConfigRequestSupp.enableDiscoveryWindowEarlyTermination = false;
+    NanEnableRequest req = createNanConfigRequest();
+    NanConfigRequestSupplemental nanConfigRequestSupp = createNanConfigRequestSupplemental();
 
     callback_event_bitmap_ = 0;
     auto status = wifi_nan_iface_->enableRequest(inputCmdId, req, nanConfigRequestSupp);
@@ -670,6 +693,96 @@
         ASSERT_EQ(id_, inputCmdId + 1);
         ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
     }
+    status = wifi_nan_iface_->stopPublishRequest(inputCmdId + 2, session_id_);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_STOP_PUBLISH_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_STOP_PUBLISH_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 2);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+    status = wifi_nan_iface_->disableRequest(inputCmdId + 3);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_DISABLE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_DISABLE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 3);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+}
+
+/*
+ * StartSubscribeRequest
+ */
+TEST_P(WifiNanIfaceAidlTest, StartSubscribeRequest) {
+    uint16_t inputCmdId = 10;
+    NanEnableRequest req = createNanConfigRequest();
+    NanConfigRequestSupplemental nanConfigRequestSupp = createNanConfigRequestSupplemental();
+
+    callback_event_bitmap_ = 0;
+    auto status = wifi_nan_iface_->enableRequest(inputCmdId, req, nanConfigRequestSupp);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+
+    NanSubscribeRequest nanSubscribeRequest = {};
+    nanSubscribeRequest.baseConfigs.sessionId = 0;
+    nanSubscribeRequest.baseConfigs.ttlSec = 0;
+    nanSubscribeRequest.baseConfigs.discoveryWindowPeriod = 1;
+    nanSubscribeRequest.baseConfigs.discoveryCount = 0;
+    nanSubscribeRequest.baseConfigs.serviceName = {97};
+    nanSubscribeRequest.baseConfigs.discoveryMatchIndicator = NanMatchAlg::MATCH_NEVER;
+    nanSubscribeRequest.baseConfigs.useRssiThreshold = false;
+    nanSubscribeRequest.baseConfigs.disableDiscoveryTerminationIndication = false;
+    nanSubscribeRequest.baseConfigs.disableMatchExpirationIndication = true;
+    nanSubscribeRequest.baseConfigs.disableFollowupReceivedIndication = false;
+    nanSubscribeRequest.baseConfigs.securityConfig.securityType = NanDataPathSecurityType::OPEN;
+    nanSubscribeRequest.subscribeType = NanSubscribeType::PASSIVE;
+    if (interface_version_ >= 2) {
+        LOG(INFO) << "Including vendor data in Publish request";
+        nanSubscribeRequest.vendorData = kTestVendorDataOptional;
+    }
+
+    status = wifi_nan_iface_->startSubscribeRequest(inputCmdId + 1, nanSubscribeRequest);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_START_SUBSCRIBE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_START_SUBSCRIBE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 1);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+    status = wifi_nan_iface_->stopSubscribeRequest(inputCmdId + 2, session_id_);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_STOP_SUBSCRIBE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_STOP_SUBSCRIBE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 2);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+    status = wifi_nan_iface_->disableRequest(inputCmdId + 3);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_DISABLE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_DISABLE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 3);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
 }
 
 /*
@@ -705,6 +818,160 @@
     }
 }
 
+/*
+ * Test suspend/resume on publish
+ */
+TEST_P(WifiNanIfaceAidlTest, StartSuspendResumeOnPublishRequest) {
+    uint16_t inputCmdId = 10;
+
+    EXPECT_TRUE(wifi_nan_iface_->getCapabilitiesRequest(inputCmdId).isOk());
+    ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_CAPABILITIES_RESPONSE));
+    if (!capabilities_.supportsSuspension) {
+        return;
+    }
+
+    NanEnableRequest req = createNanConfigRequest();
+    NanConfigRequestSupplemental nanConfigRequestSupp = createNanConfigRequestSupplemental();
+
+    callback_event_bitmap_ = 0;
+    auto status = wifi_nan_iface_->enableRequest(inputCmdId + 1, req, nanConfigRequestSupp);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 1);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+
+    NanPublishRequest nanPublishRequest = {};
+    nanPublishRequest.baseConfigs.sessionId = 0;
+    nanPublishRequest.baseConfigs.ttlSec = 0;
+    nanPublishRequest.baseConfigs.discoveryWindowPeriod = 1;
+    nanPublishRequest.baseConfigs.discoveryCount = 0;
+    nanPublishRequest.baseConfigs.serviceName = {97};
+    nanPublishRequest.baseConfigs.discoveryMatchIndicator = NanMatchAlg::MATCH_NEVER;
+    nanPublishRequest.baseConfigs.useRssiThreshold = false;
+    nanPublishRequest.baseConfigs.disableDiscoveryTerminationIndication = false;
+    nanPublishRequest.baseConfigs.disableMatchExpirationIndication = true;
+    nanPublishRequest.baseConfigs.disableFollowupReceivedIndication = false;
+    nanPublishRequest.baseConfigs.securityConfig.securityType = NanDataPathSecurityType::OPEN;
+    nanPublishRequest.baseConfigs.enableSessionSuspendability = true;
+    nanPublishRequest.autoAcceptDataPathRequests = false;
+    nanPublishRequest.publishType = NanPublishType::UNSOLICITED;
+    nanPublishRequest.txType = NanTxType::BROADCAST;
+
+    status = wifi_nan_iface_->startPublishRequest(inputCmdId + 2, nanPublishRequest);
+    ASSERT_TRUE(status.isOk());
+    // Wait for a callback.
+    ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_START_PUBLISH_RESPONSE));
+    ASSERT_TRUE(receivedCallback(NOTIFY_START_PUBLISH_RESPONSE));
+    ASSERT_EQ(id_, inputCmdId + 2);
+    ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    // Without NDP, suspend and resume should fail.
+    status = wifi_nan_iface_->suspendRequest(inputCmdId + 3, session_id_);
+    ASSERT_FALSE(status.isOk());
+    status = wifi_nan_iface_->resumeRequest(inputCmdId + 4, session_id_);
+    ASSERT_FALSE(status.isOk());
+}
+
+/*
+ * Test suspend/resume on Subscribe
+ */
+TEST_P(WifiNanIfaceAidlTest, StartSuspendResumeOnSubscribeRequest) {
+    uint16_t inputCmdId = 10;
+
+    EXPECT_TRUE(wifi_nan_iface_->getCapabilitiesRequest(inputCmdId).isOk());
+    ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_CAPABILITIES_RESPONSE));
+    if (!capabilities_.supportsSuspension) {
+        return;
+    }
+    NanEnableRequest req = createNanConfigRequest();
+    NanConfigRequestSupplemental nanConfigRequestSupp = createNanConfigRequestSupplemental();
+    callback_event_bitmap_ = 0;
+    auto status = wifi_nan_iface_->enableRequest(inputCmdId + 1, req, nanConfigRequestSupp);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 1);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+
+    NanSubscribeRequest nanSubscribeRequest = {};
+    nanSubscribeRequest.baseConfigs.sessionId = 0;
+    nanSubscribeRequest.baseConfigs.ttlSec = 0;
+    nanSubscribeRequest.baseConfigs.discoveryWindowPeriod = 1;
+    nanSubscribeRequest.baseConfigs.discoveryCount = 0;
+    nanSubscribeRequest.baseConfigs.serviceName = {97};
+    nanSubscribeRequest.baseConfigs.discoveryMatchIndicator = NanMatchAlg::MATCH_NEVER;
+    nanSubscribeRequest.baseConfigs.useRssiThreshold = false;
+    nanSubscribeRequest.baseConfigs.disableDiscoveryTerminationIndication = false;
+    nanSubscribeRequest.baseConfigs.disableMatchExpirationIndication = true;
+    nanSubscribeRequest.baseConfigs.disableFollowupReceivedIndication = false;
+    nanSubscribeRequest.baseConfigs.securityConfig.securityType = NanDataPathSecurityType::OPEN;
+    nanSubscribeRequest.baseConfigs.enableSessionSuspendability = true;
+    nanSubscribeRequest.subscribeType = NanSubscribeType::ACTIVE;
+
+    status = wifi_nan_iface_->startSubscribeRequest(inputCmdId + 2, nanSubscribeRequest);
+    ASSERT_TRUE(status.isOk());
+    // Wait for a callback.
+    ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_START_SUBSCRIBE_RESPONSE));
+    ASSERT_TRUE(receivedCallback(NOTIFY_START_SUBSCRIBE_RESPONSE));
+    ASSERT_EQ(id_, inputCmdId + 2);
+    ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    // Without NDP, suspend and resume should fail.
+    status = wifi_nan_iface_->suspendRequest(inputCmdId + 3, session_id_);
+    ASSERT_FALSE(status.isOk());
+    status = wifi_nan_iface_->resumeRequest(inputCmdId + 4, session_id_);
+    ASSERT_FALSE(status.isOk());
+}
+
+/*
+ * Test create/delete Aware data interfaces
+ */
+TEST_P(WifiNanIfaceAidlTest, CreateDeleteDataInterfaces) {
+    uint16_t inputCmdId = 10;
+    NanEnableRequest req = createNanConfigRequest();
+
+    NanConfigRequestSupplemental nanConfigRequestSupp = createNanConfigRequestSupplemental();
+
+    callback_event_bitmap_ = 0;
+    auto status = wifi_nan_iface_->enableRequest(inputCmdId, req, nanConfigRequestSupp);
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_ENABLE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+    status = wifi_nan_iface_->createDataInterfaceRequest(inputCmdId + 1, "aware_data0");
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_CREATE_DATA_INTERFACE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_CREATE_DATA_INTERFACE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 1);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+    status = wifi_nan_iface_->deleteDataInterfaceRequest(inputCmdId + 2, "aware_data0");
+    if (!checkStatusCode(&status, WifiStatusCode::ERROR_NOT_SUPPORTED)) {
+        ASSERT_TRUE(status.isOk());
+
+        // Wait for a callback.
+        ASSERT_EQ(std::cv_status::no_timeout, wait(NOTIFY_DELETE_DATA_INTERFACE_RESPONSE));
+        ASSERT_TRUE(receivedCallback(NOTIFY_DELETE_DATA_INTERFACE_RESPONSE));
+        ASSERT_EQ(id_, inputCmdId + 2);
+        ASSERT_EQ(status_.status, NanStatusCode::SUCCESS);
+    }
+}
+
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(WifiNanIfaceAidlTest);
 INSTANTIATE_TEST_SUITE_P(WifiTest, WifiNanIfaceAidlTest,
                          testing::ValuesIn(android::getAidlHalInstanceNames(IWifi::descriptor)),
diff --git a/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp b/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp
index 5e8e21f..f997c43 100644
--- a/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp
+++ b/wifi/aidl/vts/functional/wifi_sta_iface_aidl_test.cpp
@@ -36,6 +36,7 @@
 using aidl::android::hardware::wifi::Ssid;
 using aidl::android::hardware::wifi::StaApfPacketFilterCapabilities;
 using aidl::android::hardware::wifi::StaBackgroundScanCapabilities;
+using aidl::android::hardware::wifi::StaBackgroundScanParameters;
 using aidl::android::hardware::wifi::StaLinkLayerStats;
 using aidl::android::hardware::wifi::StaRoamingCapabilities;
 using aidl::android::hardware::wifi::StaRoamingConfig;
@@ -47,6 +48,12 @@
 using aidl::android::hardware::wifi::WifiDebugTxPacketFateReport;
 using aidl::android::hardware::wifi::WifiStatusCode;
 
+namespace {
+const int kTestCmdId = 123;
+const std::array<uint8_t, 6> kTestMacAddr1 = {0x1a, 0x2b, 0x3c, 0x4d, 0x5e, 0x6f};
+const std::array<uint8_t, 6> kTestMacAddr2 = {0x4a, 0x5b, 0x6c, 0x7d, 0x8e, 0x9f};
+}  // namespace
+
 class WifiStaIfaceAidlTest : public testing::TestWithParam<std::string> {
   public:
     void SetUp() override {
@@ -523,6 +530,52 @@
     EXPECT_TRUE(wifi_sta_iface_->twtSessionResume(1, 10).isOk());
 }
 
+/*
+ * GetName
+ */
+TEST_P(WifiStaIfaceAidlTest, GetName) {
+    std::string ifaceName;
+    EXPECT_TRUE(wifi_sta_iface_->getName(&ifaceName).isOk());
+}
+
+/*
+ * SetDtimMultiplier
+ */
+TEST_P(WifiStaIfaceAidlTest, SetDtimMultiplier) {
+    // Multiplied value
+    EXPECT_TRUE(wifi_sta_iface_->setDtimMultiplier(2).isOk());
+    // Driver default value
+    EXPECT_TRUE(wifi_sta_iface_->setDtimMultiplier(0).isOk());
+}
+
+/*
+ * Start/Stop Background Scan
+ */
+TEST_P(WifiStaIfaceAidlTest, StartAndStopBackgroundScan) {
+    if (!isFeatureSupported(IWifiStaIface::FeatureSetMask::BACKGROUND_SCAN)) {
+        GTEST_SKIP() << "Background scan is not supported";
+    }
+    StaBackgroundScanParameters scanParams;
+    EXPECT_TRUE(wifi_sta_iface_->startBackgroundScan(kTestCmdId, scanParams).isOk());
+    EXPECT_TRUE(wifi_sta_iface_->stopBackgroundScan(kTestCmdId).isOk());
+}
+
+/*
+ * Start/Stop Sending Keep-Alive Packets
+ */
+TEST_P(WifiStaIfaceAidlTest, StartAndStopSendingKeepAlivePackets) {
+    std::vector<uint8_t> ipPacketData(20);
+    uint16_t etherType = 0x0800;  // IPv4
+    uint32_t periodInMs = 1000;   // 1 sec
+
+    // Expected to fail with test values
+    EXPECT_FALSE(wifi_sta_iface_
+                         ->startSendingKeepAlivePackets(kTestCmdId, ipPacketData, etherType,
+                                                        kTestMacAddr1, kTestMacAddr2, periodInMs)
+                         .isOk());
+    EXPECT_FALSE(wifi_sta_iface_->stopSendingKeepAlivePackets(kTestCmdId).isOk());
+}
+
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(WifiStaIfaceAidlTest);
 INSTANTIATE_TEST_SUITE_P(WifiTest, WifiStaIfaceAidlTest,
                          testing::ValuesIn(android::getAidlHalInstanceNames(IWifi::descriptor)),
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
index 778e20a..3522014 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
@@ -986,15 +986,16 @@
  * Test the P2P network management functions.
  */
 TEST_P(SupplicantP2pIfaceAidlTest, ManageNetworks) {
-    std::shared_ptr<ISupplicantP2pNetwork> network;
-    EXPECT_TRUE(p2p_iface_->addNetwork(&network).isOk());
-    ASSERT_NE(network, nullptr);
+    // Create a persistent group to bring up a network
+    EXPECT_TRUE(p2p_iface_->addGroup(true /* persistent */, -1).isOk());
+    sleep(2);
 
     std::vector<int32_t> networkList;
     EXPECT_TRUE(p2p_iface_->listNetworks(&networkList).isOk());
     ASSERT_FALSE(networkList.empty());
 
     int networkId = networkList[0];
+    std::shared_ptr<ISupplicantP2pNetwork> network;
     EXPECT_TRUE(p2p_iface_->getNetwork(networkId, &network).isOk());
     ASSERT_NE(network, nullptr);
     EXPECT_TRUE(p2p_iface_->removeNetwork(networkId).isOk());
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp
index c5a73f1..165a01a 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_network_aidl_test.cpp
@@ -48,11 +48,22 @@
 
         EXPECT_TRUE(supplicant_->getP2pInterface(getP2pIfaceName(), &p2p_iface_).isOk());
         ASSERT_NE(p2p_iface_, nullptr);
-        EXPECT_TRUE(p2p_iface_->addNetwork(&p2p_network_).isOk());
+
+        // Create a persistent group to bring up a network
+        EXPECT_TRUE(p2p_iface_->addGroup(true /* persistent */, -1).isOk());
+        sleep(2);
+
+        std::vector<int32_t> networkList;
+        EXPECT_TRUE(p2p_iface_->listNetworks(&networkList).isOk());
+        ASSERT_FALSE(networkList.empty());
+
+        network_id_ = networkList[0];
+        EXPECT_TRUE(p2p_iface_->getNetwork(network_id_, &p2p_network_).isOk());
         ASSERT_NE(p2p_network_, nullptr);
     }
 
     void TearDown() override {
+        EXPECT_TRUE(p2p_iface_->removeNetwork(network_id_).isOk());
         stopSupplicantService();
         startWifiFramework();
     }
@@ -61,6 +72,7 @@
     std::shared_ptr<ISupplicant> supplicant_;
     std::shared_ptr<ISupplicantP2pIface> p2p_iface_;
     std::shared_ptr<ISupplicantP2pNetwork> p2p_network_;
+    int network_id_;
 };
 
 /*
@@ -130,7 +142,8 @@
 TEST_P(SupplicantP2pNetworkAidlTest, IsGroupOwner) {
     bool isGroupOwner;
     EXPECT_TRUE(p2p_network_->isGroupOwner(&isGroupOwner).isOk());
-    EXPECT_FALSE(isGroupOwner);
+    // Configured network is a group owner
+    EXPECT_TRUE(isGroupOwner);
 }
 
 /*
@@ -139,7 +152,8 @@
 TEST_P(SupplicantP2pNetworkAidlTest, IsPersistent) {
     bool isPersistent;
     EXPECT_TRUE(p2p_network_->isPersistent(&isPersistent).isOk());
-    EXPECT_FALSE(isPersistent);
+    // Configured network is persistent
+    EXPECT_TRUE(isPersistent);
 }
 
 /*
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp
index cc3e821..257607f 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp
@@ -43,10 +43,12 @@
 using aidl::android::hardware::wifi::supplicant::ISupplicantStaIface;
 using aidl::android::hardware::wifi::supplicant::ISupplicantStaNetwork;
 using aidl::android::hardware::wifi::supplicant::KeyMgmtMask;
+using aidl::android::hardware::wifi::supplicant::MloLinksInfo;
 using aidl::android::hardware::wifi::supplicant::MscsParams;
 using aidl::android::hardware::wifi::supplicant::QosCharacteristics;
 using aidl::android::hardware::wifi::supplicant::QosPolicyScsData;
 using aidl::android::hardware::wifi::supplicant::QosPolicyScsRequestStatus;
+using aidl::android::hardware::wifi::supplicant::RxFilterType;
 using aidl::android::hardware::wifi::supplicant::SignalPollResult;
 using aidl::android::hardware::wifi::supplicant::UsdBaseConfig;
 using aidl::android::hardware::wifi::supplicant::UsdCapabilities;
@@ -974,6 +976,94 @@
     EXPECT_TRUE(sta_iface_->getSignalPollResults(&results).isOk());
 }
 
+/*
+ * Test that we can add, remove, start, and stop an RX filter.
+ */
+TEST_P(SupplicantStaIfaceAidlTest, ConfigureRxFilter) {
+    RxFilterType filterType = RxFilterType::V4_MULTICAST;
+    EXPECT_TRUE(sta_iface_->addRxFilter(filterType).isOk());
+    EXPECT_TRUE(sta_iface_->startRxFilter().isOk());
+    EXPECT_TRUE(sta_iface_->stopRxFilter().isOk());
+    EXPECT_TRUE(sta_iface_->removeRxFilter(filterType).isOk());
+}
+
+/*
+ * Test that we can start and cancel all WPS methods.
+ */
+TEST_P(SupplicantStaIfaceAidlTest, StartAndCancelWps) {
+    std::vector<uint8_t> zeroMacAddr = {0, 0, 0, 0, 0, 0};
+    std::string pin = "12345678";
+
+    EXPECT_TRUE(sta_iface_->startWpsPbc(zeroMacAddr).isOk());
+    EXPECT_TRUE(sta_iface_->cancelWps().isOk());
+
+    std::string generatedPin;
+    EXPECT_TRUE(sta_iface_->startWpsPinDisplay(zeroMacAddr, &generatedPin).isOk());
+    EXPECT_TRUE(sta_iface_->cancelWps().isOk());
+
+    EXPECT_TRUE(sta_iface_->startWpsPinKeypad(pin).isOk());
+    EXPECT_TRUE(sta_iface_->cancelWps().isOk());
+
+    EXPECT_TRUE(sta_iface_->startWpsRegistrar(zeroMacAddr, pin).isOk());
+    EXPECT_TRUE(sta_iface_->cancelWps().isOk());
+}
+
+/*
+ * Test that we can add, list, get, and remove a network.
+ */
+TEST_P(SupplicantStaIfaceAidlTest, ManageNetwork) {
+    std::shared_ptr<ISupplicantStaNetwork> network;
+    EXPECT_TRUE(sta_iface_->addNetwork(&network).isOk());
+    EXPECT_NE(network, nullptr);
+
+    std::vector<int32_t> networkList;
+    EXPECT_TRUE(sta_iface_->listNetworks(&networkList).isOk());
+    EXPECT_EQ(networkList.size(), 1);
+
+    int networkId;
+    EXPECT_TRUE(network->getId(&networkId).isOk());
+    EXPECT_EQ(networkId, networkList[0]);
+
+    std::shared_ptr<ISupplicantStaNetwork> retrievedNetwork;
+    EXPECT_TRUE(sta_iface_->getNetwork(networkId, &retrievedNetwork).isOk());
+    EXPECT_NE(retrievedNetwork, nullptr);
+    EXPECT_TRUE(sta_iface_->removeNetwork(networkId).isOk());
+}
+
+/*
+ * EnableAutoReconnect
+ */
+TEST_P(SupplicantStaIfaceAidlTest, EnableAutoReconnect) {
+    EXPECT_TRUE(sta_iface_->enableAutoReconnect(true).isOk());
+    EXPECT_TRUE(sta_iface_->enableAutoReconnect(false).isOk());
+}
+
+/*
+ * SetQosPolicyFeatureEnabled
+ */
+TEST_P(SupplicantStaIfaceAidlTest, SetQosPolicyFeatureEnabled) {
+    EXPECT_TRUE(sta_iface_->setQosPolicyFeatureEnabled(true).isOk());
+    EXPECT_TRUE(sta_iface_->setQosPolicyFeatureEnabled(false).isOk());
+}
+
+/*
+ * GetConnectionMloLinksInfo
+ */
+TEST_P(SupplicantStaIfaceAidlTest, GetConnectionMloLinksInfo) {
+    MloLinksInfo mloInfo;
+    EXPECT_TRUE(sta_iface_->getConnectionMloLinksInfo(&mloInfo).isOk());
+}
+
+/*
+ * StopDppInitiator
+ */
+TEST_P(SupplicantStaIfaceAidlTest, StopDppInitiator) {
+    if (!keyMgmtSupported(sta_iface_, KeyMgmtMask::DPP)) {
+        GTEST_SKIP() << "Missing DPP support";
+    }
+    EXPECT_TRUE(sta_iface_->stopDppInitiator().isOk());
+}
+
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(SupplicantStaIfaceAidlTest);
 INSTANTIATE_TEST_SUITE_P(Supplicant, SupplicantStaIfaceAidlTest,
                          testing::ValuesIn(android::getAidlHalInstanceNames(
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp
index 5e6069f..2f0053a 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp
@@ -862,6 +862,20 @@
     EXPECT_TRUE(sta_network_->setVendorData(kTestVendorData).isOk());
 }
 
+/*
+ * Set/Get EDMG
+ */
+TEST_P(SupplicantStaNetworkAidlTest, SetGetEdmg) {
+    bool retrievedValue = false;
+    EXPECT_TRUE(sta_network_->setEdmg(true).isOk());
+    EXPECT_TRUE(sta_network_->getEdmg(&retrievedValue).isOk());
+    EXPECT_EQ(retrievedValue, true);
+
+    EXPECT_TRUE(sta_network_->setEdmg(false).isOk());
+    EXPECT_TRUE(sta_network_->getEdmg(&retrievedValue).isOk());
+    EXPECT_EQ(retrievedValue, false);
+}
+
 GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(SupplicantStaNetworkAidlTest);
 INSTANTIATE_TEST_SUITE_P(Supplicant, SupplicantStaNetworkAidlTest,
                          testing::ValuesIn(android::getAidlHalInstanceNames(