diff --git a/audio/7.0/IDevice.hal b/audio/7.0/IDevice.hal
index eecd92e..e30e545 100644
--- a/audio/7.0/IDevice.hal
+++ b/audio/7.0/IDevice.hal
@@ -117,7 +117,7 @@
             AudioIoHandle ioHandle,
             DeviceAddress device,
             AudioConfig config,
-            bitfield<AudioOutputFlag> flags,
+            vec<AudioInOutFlag> flags,
             SourceMetadata sourceMetadata) generates (
                     Result retval,
                     IStreamOut outStream,
@@ -142,7 +142,7 @@
             AudioIoHandle ioHandle,
             DeviceAddress device,
             AudioConfig config,
-            bitfield<AudioInputFlag> flags,
+            vec<AudioInOutFlag> flags,
             SinkMetadata sinkMetadata) generates (
                     Result retval,
                     IStreamIn inStream,
diff --git a/audio/7.0/IStream.hal b/audio/7.0/IStream.hal
index 789cb1d..4fe8218 100644
--- a/audio/7.0/IStream.hal
+++ b/audio/7.0/IStream.hal
@@ -44,49 +44,23 @@
     getBufferSize() generates (uint64_t bufferSize);
 
     /**
-     * Return supported native sampling rates of the stream for a given format.
-     * A supported native sample rate is a sample rate that can be efficiently
-     * played by the hardware (typically without sample-rate conversions).
+     * Return supported audio profiles for this particular stream. This method
+     * is normally called for streams opened on devices that use dynamic
+     * profiles, e.g. HDMI and USB interfaces. Please note that supported
+     * profiles of the stream may differ from the capabilities of the connected
+     * physical device.
      *
-     * This function is only called for dynamic profile. If called for
-     * non-dynamic profile is should return NOT_SUPPORTED or the same list
-     * as in audio_policy_configuration.xml.
-     *
-     * Calling this method is equivalent to getting
-     * AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES on the legacy HAL.
-     *
-     *
-     * @param format audio format for which the sample rates are supported.
-     * @return retval operation completion status.
-     *                Must be OK if the format is supported.
-     * @return sampleRateHz supported sample rates.
-     */
-    getSupportedSampleRates(AudioFormat format)
-            generates (Result retval, vec<uint32_t> sampleRates);
-
-    /**
-     * Return supported channel masks of the stream. Calling this method is
-     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_CHANNELS on the legacy
-     * HAL.
-     *
-     * @param format audio format for which the channel masks are supported.
-     * @return retval operation completion status.
-     *                Must be OK if the format is supported.
-     * @return masks supported audio masks.
-     */
-    getSupportedChannelMasks(AudioFormat format)
-            generates (Result retval, vec<vec<AudioChannelMask>> masks);
-
-    /**
-     * Return supported audio formats of the stream. Calling this method is
-     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_FORMATS on the legacy
-     * HAL.
+     * For devices with fixed configurations, e.g. built-in audio devices, all
+     * the profiles are specified in the audio_policy_configuration.xml
+     * file. For such devices, this method must return the configuration from
+     * the config file, or NOT_SUPPORTED retval.
      *
      * @return retval operation completion status.
-     * @return formats supported audio formats.
+     * @return formats supported audio profiles.
      *                 Must be non empty if retval is OK.
      */
-    getSupportedFormats() generates (Result retval, vec<AudioFormat> formats);
+    getSupportedProfiles()
+            generates (Result retval, vec<AudioProfile> profiles);
 
     /**
      * Retrieves basic stream configuration: sample rate, audio format,
@@ -94,18 +68,18 @@
      *
      * @return config basic stream configuration.
      */
-    getAudioProperties() generates (AudioBasicConfig config);
+    getAudioProperties() generates (AudioConfigBase config);
 
     /**
      * Sets stream parameters. Only sets parameters that are specified.
-     * See the description of AudioBasicConfig for the details.
+     * See the description of AudioConfigBase for the details.
      *
      * Optional method. If implemented, only called on a stopped stream.
      *
      * @param config basic stream configuration.
      * @return retval operation completion status.
      */
-    setAudioProperties(AudioBasicConfig config) generates (Result retval);
+    setAudioProperties(AudioConfigBase config) generates (Result retval);
 
     /**
      * Applies audio effect to the stream.
diff --git a/audio/7.0/config/api/current.txt b/audio/7.0/config/api/current.txt
index fd9a8ef..ac8dc8a 100644
--- a/audio/7.0/config/api/current.txt
+++ b/audio/7.0/config/api/current.txt
@@ -228,6 +228,33 @@
     enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_WMA_PRO;
   }
 
+  public enum AudioInOutFlag {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_DIRECT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_FAST;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_HW_AV_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_HW_HOTWORD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_MMAP_NOIRQ;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_RAW;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_INPUT_FLAG_VOIP_TX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_DEEP_BUFFER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_DIRECT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_DIRECT_PCM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_FAST;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_HW_AV_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_IEC958_NONAUDIO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_INCALL_MUSIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_MMAP_NOIRQ;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_NON_BLOCKING;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_PRIMARY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_RAW;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_SYNC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_TTS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioInOutFlag AUDIO_OUTPUT_FLAG_VOIP_RX;
+  }
+
   public class AudioPolicyConfiguration {
     ctor public AudioPolicyConfiguration();
     method public audio.policy.configuration.V7_0.GlobalConfiguration getGlobalConfiguration();
@@ -396,7 +423,7 @@
 
   public static class MixPorts.MixPort {
     ctor public MixPorts.MixPort();
-    method public String getFlags();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioInOutFlag> getFlags();
     method public audio.policy.configuration.V7_0.Gains getGains();
     method public long getMaxActiveCount();
     method public long getMaxOpenCount();
@@ -404,7 +431,7 @@
     method public java.util.List<audio.policy.configuration.V7_0.AudioUsage> getPreferredUsage();
     method public java.util.List<audio.policy.configuration.V7_0.Profile> getProfile();
     method public audio.policy.configuration.V7_0.Role getRole();
-    method public void setFlags(String);
+    method public void setFlags(java.util.List<audio.policy.configuration.V7_0.AudioInOutFlag>);
     method public void setGains(audio.policy.configuration.V7_0.Gains);
     method public void setMaxActiveCount(long);
     method public void setMaxOpenCount(long);
diff --git a/audio/7.0/config/audio_policy_configuration.xsd b/audio/7.0/config/audio_policy_configuration.xsd
index 4555a88..20fe020 100644
--- a/audio/7.0/config/audio_policy_configuration.xsd
+++ b/audio/7.0/config/audio_policy_configuration.xsd
@@ -155,16 +155,41 @@
             <xs:element name="item" type="xs:token" minOccurs="0" maxOccurs="unbounded"/>
         </xs:sequence>
     </xs:complexType>
-    <xs:simpleType name="audioInOutFlags">
+    <xs:simpleType name="audioInOutFlag">
         <xs:annotation>
             <xs:documentation xml:lang="en">
-                "|" separated list of audio_output_flags_t or audio_input_flags_t.
+              The flags indicate suggested stream attributes supported by the profile.
             </xs:documentation>
         </xs:annotation>
         <xs:restriction base="xs:string">
-            <xs:pattern value="|[_A-Z]+(\|[_A-Z]+)*"/>
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_DIRECT" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_PRIMARY" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_FAST" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_DEEP_BUFFER" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_NON_BLOCKING" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_HW_AV_SYNC" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_TTS" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_RAW" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_SYNC" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_IEC958_NONAUDIO" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_DIRECT_PCM" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_MMAP_NOIRQ" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_VOIP_RX" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_INCALL_MUSIC" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_FAST" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_HW_HOTWORD" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_RAW" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_SYNC" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_MMAP_NOIRQ" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_VOIP_TX" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_HW_AV_SYNC" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_DIRECT" />
         </xs:restriction>
     </xs:simpleType>
+    <xs:simpleType name="audioInOutFlags">
+        <xs:list itemType="audioInOutFlag" />
+    </xs:simpleType>
     <xs:simpleType name="role">
         <xs:restriction base="xs:string">
             <xs:enumeration value="sink"/>
diff --git a/audio/7.0/config/update_audio_policy_config.sh b/audio/7.0/config/update_audio_policy_config.sh
index 8714b5f..051a0df 100755
--- a/audio/7.0/config/update_audio_policy_config.sh
+++ b/audio/7.0/config/update_audio_policy_config.sh
@@ -128,6 +128,7 @@
 for F in $SOURCE_FILES; do
     updateFile ${F} "channelMasks" ","
     updateFile ${F} "samplingRates" ","
+    updateFile ${F} "flags" "|"
 done;
 
 updateIncludes() {
diff --git a/audio/7.0/types.hal b/audio/7.0/types.hal
index 15ca492..4a9e289 100644
--- a/audio/7.0/types.hal
+++ b/audio/7.0/types.hal
@@ -357,56 +357,15 @@
 };
 
 /**
- * The audio output flags serve two purposes:
+ * The audio flags serve two purposes:
  *
- *  - when an output stream is created they indicate its attributes;
+ *  - when a stream is created they indicate its attributes;
  *
- *  - when present in an output profile descriptor listed for a particular audio
- *    hardware module, they indicate that an output stream can be opened that
+ *  - when present in a profile descriptor listed for a particular audio
+ *    hardware module, they indicate that a stream can be opened that
  *    supports the attributes indicated by the flags.
+ *
+ * See 'audioIoFlag' in audio_policy_configuration.xsd for the
+ * list of allowed values.
  */
-@export(name="audio_output_flags_t", value_prefix="AUDIO_OUTPUT_FLAG_")
-enum AudioOutputFlag : int32_t {
-    NONE    = 0x0, // no attributes
-    DIRECT  = 0x1, // this output directly connects a track
-                   // to one output stream: no software mixer
-    PRIMARY = 0x2, // this output is the primary output of the device. It is
-                   // unique and must be present. It is opened by default and
-                   // receives routing, audio mode and volume controls related
-                   // to voice calls.
-    FAST    = 0x4,    // output supports "fast tracks", defined elsewhere
-    DEEP_BUFFER      = 0x8,   // use deep audio buffers
-    COMPRESS_OFFLOAD = 0x10,  // offload playback of compressed streams to
-                              // hardware codec
-    NON_BLOCKING     = 0x20,  // use non-blocking write
-    HW_AV_SYNC = 0x40,   // output uses a hardware A/V sync
-    TTS        = 0x80,   // output for streams transmitted through speaker at a
-                         // sample rate high enough to accommodate lower-range
-                         // ultrasonic p/b
-    RAW        = 0x100,  // minimize signal processing
-    SYNC       = 0x200,  // synchronize I/O streams
-    IEC958_NONAUDIO = 0x400, // Audio stream contains compressed audio in SPDIF
-                             // data bursts, not PCM.
-    DIRECT_PCM = 0x2000,     // Audio stream containing PCM data that needs
-                             // to pass through compress path for DSP post proc.
-    MMAP_NOIRQ = 0x4000, // output operates in MMAP no IRQ mode.
-    VOIP_RX = 0x8000,    // preferred output for VoIP calls.
-    /** preferred output for call music */
-    INCALL_MUSIC = 0x10000,
-};
-
-/**
- * The audio input flags are analogous to audio output flags.
- */
-@export(name="audio_input_flags_t", value_prefix="AUDIO_INPUT_FLAG_")
-enum AudioInputFlag : int32_t {
-    NONE         = 0x0,  // no attributes
-    FAST         = 0x1,  // prefer an input that supports "fast tracks"
-    HW_HOTWORD   = 0x2,  // prefer an input that captures from hw hotword source
-    RAW          = 0x4,  // minimize signal processing
-    SYNC         = 0x8,  // synchronize I/O streams
-    MMAP_NOIRQ   = 0x10, // input operates in MMAP no IRQ mode.
-    VOIP_TX      = 0x20, // preferred input for VoIP calls.
-    HW_AV_SYNC   = 0x40, // input connected to an output that uses a hardware A/V sync
-    DIRECT       = 0x80, // for acquiring encoded streams
-};
+typedef string AudioInOutFlag;