diff --git a/audio/7.0/Android.bp b/audio/7.0/Android.bp
new file mode 100644
index 0000000..d07ce12
--- /dev/null
+++ b/audio/7.0/Android.bp
@@ -0,0 +1,25 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.audio@7.0",
+    root: "android.hardware",
+    srcs: [
+        "types.hal",
+        "IDevice.hal",
+        "IDevicesFactory.hal",
+        "IPrimaryDevice.hal",
+        "IStream.hal",
+        "IStreamIn.hal",
+        "IStreamOut.hal",
+        "IStreamOutCallback.hal",
+        "IStreamOutEventCallback.hal",
+    ],
+    interfaces: [
+        "android.hardware.audio.common@7.0",
+        "android.hardware.audio.effect@7.0",
+        "android.hidl.base@1.0",
+        "android.hidl.safe_union@1.0",
+    ],
+    gen_java: false,
+    gen_java_constants: true,
+}
diff --git a/audio/7.0/IDevice.hal b/audio/7.0/IDevice.hal
new file mode 100644
index 0000000..eecd92e
--- /dev/null
+++ b/audio/7.0/IDevice.hal
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+import android.hardware.audio.common@7.0;
+import IStreamIn;
+import IStreamOut;
+
+interface IDevice {
+    /**
+     * Returns whether the audio hardware interface has been initialized.
+     *
+     * @return retval OK on success, NOT_INITIALIZED on failure.
+     */
+    initCheck() generates (Result retval);
+
+    /**
+     * Sets the audio volume for all audio activities other than voice call. If
+     * NOT_SUPPORTED is returned, the software mixer will emulate this
+     * capability.
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setMasterVolume(float volume) generates (Result retval);
+
+    /**
+     * Get the current master volume value for the HAL, if the HAL supports
+     * master volume control. For example, AudioFlinger will query this value
+     * from the primary audio HAL when the service starts and use the value for
+     * setting the initial master volume across all HALs. HALs which do not
+     * support this method must return NOT_SUPPORTED in 'retval'.
+     *
+     * @return retval operation completion status.
+     * @return volume 1.0f means unity, 0.0f is zero.
+     */
+    getMasterVolume() generates (Result retval, float volume);
+
+    /**
+     * Sets microphone muting state.
+     *
+     * @param mute whether microphone is muted.
+     * @return retval operation completion status.
+     */
+    setMicMute(bool mute) generates (Result retval);
+
+    /**
+     * Gets whether microphone is muted.
+     *
+     * @return retval operation completion status.
+     * @return mute whether microphone is muted.
+     */
+    getMicMute() generates (Result retval, bool mute);
+
+    /**
+     * Set the audio mute status for all audio activities. If the return value
+     * is NOT_SUPPORTED, the software mixer will emulate this capability.
+     *
+     * @param mute whether audio is muted.
+     * @return retval operation completion status.
+     */
+    setMasterMute(bool mute) generates (Result retval);
+
+    /**
+     * Get the current master mute status for the HAL, if the HAL supports
+     * master mute control. AudioFlinger will query this value from the primary
+     * audio HAL when the service starts and use the value for setting the
+     * initial master mute across all HALs. HAL must indicate that the feature
+     * is not supported by returning NOT_SUPPORTED status.
+     *
+     * @return retval operation completion status.
+     * @return mute whether audio is muted.
+     */
+    getMasterMute() generates (Result retval, bool mute);
+
+    /**
+     * Returns audio input buffer size according to parameters passed or
+     * INVALID_ARGUMENTS if one of the parameters is not supported.
+     *
+     * @param config audio configuration.
+     * @return retval operation completion status.
+     * @return bufferSize input buffer size in bytes.
+     */
+    getInputBufferSize(AudioConfig config)
+            generates (Result retval, uint64_t bufferSize);
+
+    /**
+     * This method creates and opens the audio hardware output stream.
+     * If the stream can not be opened with the proposed audio config,
+     * HAL must provide suggested values for the audio config.
+     *
+     * @param ioHandle handle assigned by AudioFlinger.
+     * @param device device type and (if needed) address.
+     * @param config stream configuration.
+     * @param flags additional flags.
+     * @param sourceMetadata Description of the audio that will be played.
+                             May be used by implementations to configure hardware effects.
+     * @return retval operation completion status.
+     * @return outStream created output stream.
+     * @return suggestedConfig in case of invalid parameters, suggested config.
+     */
+    openOutputStream(
+            AudioIoHandle ioHandle,
+            DeviceAddress device,
+            AudioConfig config,
+            bitfield<AudioOutputFlag> flags,
+            SourceMetadata sourceMetadata) generates (
+                    Result retval,
+                    IStreamOut outStream,
+                    AudioConfig suggestedConfig);
+
+    /**
+     * This method creates and opens the audio hardware input stream.
+     * If the stream can not be opened with the proposed audio config,
+     * HAL must provide suggested values for the audio config.
+     *
+     * @param ioHandle handle assigned by AudioFlinger.
+     * @param device device type and (if needed) address.
+     * @param config stream configuration.
+     * @param flags additional flags.
+     * @param sinkMetadata Description of the audio that is suggested by the client.
+     *                     May be used by implementations to configure processing effects.
+     * @return retval operation completion status.
+     * @return inStream in case of success, created input stream.
+     * @return suggestedConfig in case of invalid parameters, suggested config.
+     */
+    openInputStream(
+            AudioIoHandle ioHandle,
+            DeviceAddress device,
+            AudioConfig config,
+            bitfield<AudioInputFlag> flags,
+            SinkMetadata sinkMetadata) generates (
+                    Result retval,
+                    IStreamIn inStream,
+                    AudioConfig suggestedConfig);
+
+    /**
+     * Returns whether HAL supports audio patches. Patch represents a connection
+     * between signal source(s) and signal sink(s). If HAL doesn't support
+     * patches natively (in hardware) then audio system will need to establish
+     * them in software.
+     *
+     * @return supports true if audio patches are supported.
+     */
+    supportsAudioPatches() generates (bool supports);
+
+    /**
+     * Creates an audio patch between several source and sink ports.  The handle
+     * is allocated by the HAL and must be unique for this audio HAL module.
+     *
+     * @param sources patch sources.
+     * @param sinks patch sinks.
+     * @return retval operation completion status.
+     * @return patch created patch handle.
+     */
+    createAudioPatch(vec<AudioPortConfig> sources, vec<AudioPortConfig> sinks)
+            generates (Result retval, AudioPatchHandle patch);
+
+    /**
+     * Updates an audio patch.
+     *
+     * Use of this function is preferred to releasing and re-creating a patch
+     * as the HAL module can figure out a way of switching the route without
+     * causing audio disruption.
+     *
+     * @param previousPatch handle of the previous patch to update.
+     * @param sources new patch sources.
+     * @param sinks new patch sinks.
+     * @return retval operation completion status.
+     * @return patch updated patch handle.
+     */
+    updateAudioPatch(
+            AudioPatchHandle previousPatch,
+            vec<AudioPortConfig> sources,
+            vec<AudioPortConfig> sinks) generates (
+                    Result retval, AudioPatchHandle patch);
+
+    /**
+     * Release an audio patch.
+     *
+     * @param patch patch handle.
+     * @return retval operation completion status.
+     */
+    releaseAudioPatch(AudioPatchHandle patch) generates (Result retval);
+
+    /**
+     * Returns the list of supported attributes for a given audio port.
+     *
+     * As input, 'port' contains the information (type, role, address etc...)
+     * needed by the HAL to identify the port.
+     *
+     * As output, 'resultPort' contains possible attributes (sampling rates,
+     * formats, channel masks, gain controllers...) for this port.
+     *
+     * @param port port identifier.
+     * @return retval operation completion status.
+     * @return resultPort port descriptor with all parameters filled up.
+     */
+    getAudioPort(AudioPort port)
+            generates (Result retval, AudioPort resultPort);
+
+    /**
+     * Set audio port configuration.
+     *
+     * @param config audio port configuration.
+     * @return retval operation completion status.
+     */
+    setAudioPortConfig(AudioPortConfig config) generates (Result retval);
+
+    /**
+     * Gets the HW synchronization source of the device. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_HW_AV_SYNC on the legacy HAL.
+     * Optional method
+     *
+     * @return retval operation completion status: OK or NOT_SUPPORTED.
+     * @return hwAvSync HW synchronization source
+     */
+    getHwAvSync() generates (Result retval, AudioHwSync hwAvSync);
+
+    /**
+     * Sets whether the screen is on. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_KEY_SCREEN_STATE on the legacy HAL.
+     * Optional method
+     *
+     * @param turnedOn whether the screen is turned on.
+     * @return retval operation completion status.
+     */
+    setScreenState(bool turnedOn) generates (Result retval);
+
+    /**
+     * Generic method for retrieving vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be retrieved at the same time.
+     * The implementation should return as many requested parameters
+     * as possible, even if one or more is not supported
+     *
+     * @param context provides more information about the request
+     * @param keys keys of the requested parameters
+     * @return retval operation completion status.
+     *         OK must be returned if keys is empty.
+     *         NOT_SUPPORTED must be returned if at least one key is unknown.
+     * @return parameters parameter key value pairs.
+     *         Must contain the value of all requested keys if retval == OK
+     */
+    getParameters(vec<ParameterValue> context, vec<string> keys)
+            generates (Result retval, vec<ParameterValue> parameters);
+
+    /**
+     * Generic method for setting vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be set at the same time though this is
+     * discouraged as it make failure analysis harder.
+     *
+     * If possible, a failed setParameters should not impact the platform state.
+     *
+     * @param context provides more information about the request
+     * @param parameters parameter key value pairs.
+     * @return retval operation completion status.
+     *         All parameters must be successfully set for OK to be returned
+     */
+    setParameters(vec<ParameterValue> context, vec<ParameterValue> parameters)
+            generates (Result retval);
+
+    /**
+     * Returns an array with available microphones in device.
+     *
+     * @return retval NOT_SUPPORTED if there are no microphones on this device
+     *                INVALID_STATE if the call is not successful,
+     *                OK otherwise.
+     *
+     * @return microphones array with microphones info
+     */
+    getMicrophones()
+         generates(Result retval, vec<MicrophoneInfo> microphones);
+
+    /**
+     * Notifies the device module about the connection state of an input/output
+     * device attached to it. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_DEVICE_[DIS]CONNECT on the legacy HAL.
+     *
+     * @param address audio device specification.
+     * @param connected whether the device is connected.
+     * @return retval operation completion status.
+     */
+    setConnectedState(DeviceAddress address, bool connected)
+            generates (Result retval);
+
+    /**
+     * Called by the framework to deinitialize the device and free up
+     * all currently allocated resources. It is recommended to close
+     * the device on the client side as soon as it is becomes unused.
+     *
+     * Note that all streams must be closed by the client before
+     * attempting to close the device they belong to.
+     *
+     * @return retval OK in case the success.
+     *                INVALID_STATE if the device was already closed
+     *                or there are streams currently opened.
+     */
+    close() generates (Result retval);
+
+    /**
+     * Applies an audio effect to an audio device. The effect is inserted
+     * according to its insertion preference specified by INSERT_... EffectFlags
+     * in the EffectDescriptor.
+     *
+     * @param device identifies the sink or source device this effect must be applied to.
+     *               "device" is the AudioPortHandle indicated for the device when the audio
+     *                patch connecting that device was created.
+     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
+     *                 the effect to add.
+     * @return retval operation completion status.
+     */
+    addDeviceEffect(AudioPortHandle device, uint64_t effectId) generates (Result retval);
+
+    /**
+     * Stops applying an audio effect to an audio device.
+     *
+     * @param device identifies the sink or source device this effect was applied to.
+     *               "device" is the AudioPortHandle indicated for the device when the audio
+     *               patch is created at the audio HAL.
+     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
+     *                 the effect.
+     * @return retval operation completion status.
+     */
+    removeDeviceEffect(AudioPortHandle device, uint64_t effectId) generates (Result retval);
+};
diff --git a/audio/7.0/IDevicesFactory.hal b/audio/7.0/IDevicesFactory.hal
new file mode 100644
index 0000000..03549b4
--- /dev/null
+++ b/audio/7.0/IDevicesFactory.hal
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+import android.hardware.audio.common@7.0;
+import IDevice;
+import IPrimaryDevice;
+
+/** This factory allows a HAL implementation to be split in multiple independent
+ *  devices (called module in the pre-treble API).
+ *  Note that this division is arbitrary and implementation are free
+ *  to only have a Primary.
+ *  The framework will query the devices according to audio_policy_configuration.xml
+ *
+ *  Each device name is arbitrary, provided by the vendor's audio_policy_configuration.xml
+ *  and only used to identify a device in this factory.
+ *  The framework must not interpret the name, treating it as a vendor opaque data
+ *  with the following exception:
+ *  - the "r_submix" device that must be present to support policyMixes (Eg: Android projected).
+ *    Note that this Device is included by default in a build derived from AOSP.
+ *
+ *  Note that on AOSP Oreo (including MR1) the "a2dp" module is not using this API
+ *  but is loaded directly from the system partition using the legacy API
+ *  due to limitations with the Bluetooth framework.
+ */
+interface IDevicesFactory {
+
+    /**
+     * Opens an audio device. To close the device, it is necessary to release
+     * references to the returned device object.
+     *
+     * @param device device name.
+     * @return retval operation completion status. Returns INVALID_ARGUMENTS
+     *         if there is no corresponding hardware module found,
+     *         NOT_INITIALIZED if an error occurred while opening the hardware
+     *         module.
+     * @return result the interface for the created device.
+     */
+    openDevice(string device) generates (Result retval, IDevice result);
+
+    /**
+     * Opens the Primary audio device that must be present.
+     * This function is not optional and must return successfully the primary device.
+     *
+     * This device must have the name "primary".
+     *
+     * The telephony stack uses this device to control the audio during a voice call.
+     *
+     * @return retval operation completion status. Must be SUCCESS.
+     *         For debugging, return INVALID_ARGUMENTS if there is no corresponding
+     *         hardware module found, NOT_INITIALIZED if an error occurred
+     *         while opening the hardware module.
+     * @return result the interface for the created device.
+     */
+    openPrimaryDevice() generates (Result retval, IPrimaryDevice result);
+};
diff --git a/audio/7.0/IPrimaryDevice.hal b/audio/7.0/IPrimaryDevice.hal
new file mode 100644
index 0000000..1427ae8
--- /dev/null
+++ b/audio/7.0/IPrimaryDevice.hal
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+import android.hardware.audio.common@7.0;
+import IDevice;
+
+interface IPrimaryDevice extends IDevice {
+    /**
+     * Sets the audio volume of a voice call.
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setVoiceVolume(float volume) generates (Result retval);
+
+    /**
+     * This method is used to notify the HAL about audio mode changes.
+     *
+     * @param mode new mode.
+     * @return retval operation completion status.
+     */
+    setMode(AudioMode mode) generates (Result retval);
+
+    /**
+     * Sets the name of the current BT SCO headset. Calling this method
+     * is equivalent to setting legacy "bt_headset_name" parameter.
+     * The BT SCO headset name must only be used for debugging purposes.
+     * Optional method
+     *
+     * @param name the name of the current BT SCO headset (can be empty).
+     * @return retval operation completion status.
+     */
+    setBtScoHeadsetDebugName(string name) generates (Result retval);
+
+    /**
+     * Gets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+     * Calling this method is equivalent to getting AUDIO_PARAMETER_KEY_BT_NREC
+     * on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT SCO NR + EC are enabled.
+     */
+    getBtScoNrecEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+     * Calling this method is equivalent to setting AUDIO_PARAMETER_KEY_BT_NREC
+     * on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether BT SCO NR + EC are enabled.
+     * @return retval operation completion status.
+     */
+    setBtScoNrecEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Gets whether BT SCO Wideband mode is enabled. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT Wideband is enabled.
+     */
+    getBtScoWidebandEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether BT SCO Wideband mode is enabled. Calling this method is
+     * equivalent to setting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether BT Wideband is enabled.
+     * @return retval operation completion status.
+     */
+    setBtScoWidebandEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Gets whether BT HFP (Hands-Free Profile) is enabled. Calling this method
+     * is equivalent to getting "hfp_enable" parameter value on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT HFP is enabled.
+     */
+    getBtHfpEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether BT HFP (Hands-Free Profile) is enabled. Calling this method
+     * is equivalent to setting "hfp_enable" parameter on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether BT HFP is enabled.
+     * @return retval operation completion status.
+     */
+    setBtHfpEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Sets the sampling rate of BT HFP (Hands-Free Profile). Calling this
+     * method is equivalent to setting "hfp_set_sampling_rate" parameter
+     * on the legacy HAL.
+     * Optional method
+     *
+     * @param sampleRateHz sample rate in Hz.
+     * @return retval operation completion status.
+     */
+    setBtHfpSampleRate(uint32_t sampleRateHz) generates (Result retval);
+
+    /**
+     * Sets the current output volume Hz for BT HFP (Hands-Free Profile).
+     * Calling this method is equivalent to setting "hfp_volume" parameter value
+     * on the legacy HAL (except that legacy HAL implementations expect
+     * an integer value in the range from 0 to 15.)
+     * Optional method
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setBtHfpVolume(float volume) generates (Result retval);
+
+    enum TtyMode : int32_t {
+        OFF,
+        VCO,
+        HCO,
+        FULL
+    };
+
+    /**
+     * Gets current TTY mode selection. Calling this method is equivalent to
+     * getting AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return mode TTY mode.
+     */
+    getTtyMode() generates (Result retval, TtyMode mode);
+
+    /**
+     * Sets current TTY mode. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+     *
+     * @param mode TTY mode.
+     * @return retval operation completion status.
+     */
+    setTtyMode(TtyMode mode) generates (Result retval);
+
+    /**
+     * Gets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+     * enabled. Calling this method is equivalent to getting
+     * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether HAC mode is enabled.
+     */
+    getHacEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+     * enabled. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether HAC mode is enabled.
+     * @return retval operation completion status.
+     */
+    setHacEnabled(bool enabled) generates (Result retval);
+
+    enum Rotation : int32_t {
+        DEG_0,
+        DEG_90,
+        DEG_180,
+        DEG_270
+    };
+
+    /**
+     * Updates HAL on the current rotation of the device relative to natural
+     * orientation. Calling this method is equivalent to setting legacy
+     * parameter "rotation".
+     *
+     * @param rotation rotation in degrees relative to natural device
+     *     orientation.
+     * @return retval operation completion status.
+     */
+    updateRotation(Rotation rotation) generates (Result retval);
+};
diff --git a/audio/7.0/IStream.hal b/audio/7.0/IStream.hal
new file mode 100644
index 0000000..789cb1d
--- /dev/null
+++ b/audio/7.0/IStream.hal
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+import android.hardware.audio.common@7.0;
+import android.hardware.audio.effect@7.0::IEffect;
+
+interface IStream {
+    /**
+     * Return the frame size (number of bytes per sample).
+     *
+     * @return frameSize frame size in bytes.
+     */
+    getFrameSize() generates (uint64_t frameSize);
+
+    /**
+     * Return the frame count of the buffer. Calling this method is equivalent
+     * to getting AUDIO_PARAMETER_STREAM_FRAME_COUNT on the legacy HAL.
+     *
+     * @return count frame count.
+     */
+    getFrameCount() generates (uint64_t count);
+
+    /**
+     * Return the size of input/output buffer in bytes for this stream.
+     * It must be a multiple of the frame size.
+     *
+     * @return buffer buffer size in bytes.
+     */
+    getBufferSize() generates (uint64_t bufferSize);
+
+    /**
+     * Return supported native sampling rates of the stream for a given format.
+     * A supported native sample rate is a sample rate that can be efficiently
+     * played by the hardware (typically without sample-rate conversions).
+     *
+     * This function is only called for dynamic profile. If called for
+     * non-dynamic profile is should return NOT_SUPPORTED or the same list
+     * as in audio_policy_configuration.xml.
+     *
+     * Calling this method is equivalent to getting
+     * AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES on the legacy HAL.
+     *
+     *
+     * @param format audio format for which the sample rates are supported.
+     * @return retval operation completion status.
+     *                Must be OK if the format is supported.
+     * @return sampleRateHz supported sample rates.
+     */
+    getSupportedSampleRates(AudioFormat format)
+            generates (Result retval, vec<uint32_t> sampleRates);
+
+    /**
+     * Return supported channel masks of the stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_CHANNELS on the legacy
+     * HAL.
+     *
+     * @param format audio format for which the channel masks are supported.
+     * @return retval operation completion status.
+     *                Must be OK if the format is supported.
+     * @return masks supported audio masks.
+     */
+    getSupportedChannelMasks(AudioFormat format)
+            generates (Result retval, vec<vec<AudioChannelMask>> masks);
+
+    /**
+     * Return supported audio formats of the stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_FORMATS on the legacy
+     * HAL.
+     *
+     * @return retval operation completion status.
+     * @return formats supported audio formats.
+     *                 Must be non empty if retval is OK.
+     */
+    getSupportedFormats() generates (Result retval, vec<AudioFormat> formats);
+
+    /**
+     * Retrieves basic stream configuration: sample rate, audio format,
+     * channel mask.
+     *
+     * @return config basic stream configuration.
+     */
+    getAudioProperties() generates (AudioBasicConfig config);
+
+    /**
+     * Sets stream parameters. Only sets parameters that are specified.
+     * See the description of AudioBasicConfig for the details.
+     *
+     * Optional method. If implemented, only called on a stopped stream.
+     *
+     * @param config basic stream configuration.
+     * @return retval operation completion status.
+     */
+    setAudioProperties(AudioBasicConfig config) generates (Result retval);
+
+    /**
+     * Applies audio effect to the stream.
+     *
+     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
+     *                 the effect to apply.
+     * @return retval operation completion status.
+     */
+    addEffect(uint64_t effectId) generates (Result retval);
+
+    /**
+     * Stops application of the effect to the stream.
+     *
+     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
+     *                 the effect to remove.
+     * @return retval operation completion status.
+     */
+    removeEffect(uint64_t effectId) generates (Result retval);
+
+    /**
+     * Put the audio hardware input/output into standby mode.
+     * Driver must exit from standby mode at the next I/O operation.
+     *
+     * @return retval operation completion status.
+     */
+    standby() generates (Result retval);
+
+    /**
+     * Return the set of devices which this stream is connected to.
+     * Optional method
+     *
+     * @return retval operation completion status: OK or NOT_SUPPORTED.
+     * @return device set of devices which this stream is connected to.
+     */
+    getDevices() generates (Result retval, vec<DeviceAddress> devices);
+
+    /**
+     * Connects the stream to one or multiple devices.
+     *
+     * This method must only be used for HALs that do not support
+     * 'IDevice.createAudioPatch' method. Calling this method is
+     * equivalent to setting AUDIO_PARAMETER_STREAM_ROUTING preceded
+     * with a device address in the legacy HAL interface.
+     *
+     * @param address device to connect the stream to.
+     * @return retval operation completion status.
+     */
+    setDevices(vec<DeviceAddress> devices) generates (Result retval);
+
+    /**
+     * Sets the HW synchronization source. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_STREAM_HW_AV_SYNC on the legacy HAL.
+     * Optional method
+     *
+     * @param hwAvSync HW synchronization source
+     * @return retval operation completion status.
+     */
+    setHwAvSync(AudioHwSync hwAvSync) generates (Result retval);
+
+    /**
+     * Generic method for retrieving vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be retrieved at the same time.
+     * The implementation should return as many requested parameters
+     * as possible, even if one or more is not supported
+     *
+     * @param context provides more information about the request
+     * @param keys keys of the requested parameters
+     * @return retval operation completion status.
+     *         OK must be returned if keys is empty.
+     *         NOT_SUPPORTED must be returned if at least one key is unknown.
+     * @return parameters parameter key value pairs.
+     *         Must contain the value of all requested keys if retval == OK
+     */
+    getParameters(vec<ParameterValue> context, vec<string> keys)
+            generates (Result retval, vec<ParameterValue> parameters);
+
+    /**
+     * Generic method for setting vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be set at the same time though this is
+     * discouraged as it make failure analysis harder.
+     *
+     * If possible, a failed setParameters should not impact the platform state.
+     *
+     * @param context provides more information about the request
+     * @param parameters parameter key value pairs.
+     * @return retval operation completion status.
+     *         All parameters must be successfully set for OK to be returned
+     */
+    setParameters(vec<ParameterValue> context, vec<ParameterValue> parameters)
+            generates (Result retval);
+
+    /**
+     * Called by the framework to start a stream operating in mmap mode.
+     * createMmapBuffer() must be called before calling start().
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                INVALID_STATE if called out of sequence
+     */
+    start() generates (Result retval);
+
+    /**
+     * Called by the framework to stop a stream operating in mmap mode.
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                INVALID_STATE if called out of sequence
+     */
+    stop() generates (Result retval) ;
+
+    /**
+     * Called by the framework to retrieve information on the mmap buffer used for audio
+     * samples transfer.
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @param minSizeFrames minimum buffer size requested. The actual buffer
+     *                     size returned in struct MmapBufferInfo can be larger.
+     *                     The size must be a positive value.
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                NOT_INITIALIZED in case of memory allocation error
+     *                INVALID_ARGUMENTS if the requested buffer size is invalid
+     *                INVALID_STATE if called out of sequence
+     * @return info    a MmapBufferInfo struct containing information on the MMMAP buffer created.
+     */
+    createMmapBuffer(int32_t minSizeFrames)
+            generates (Result retval, MmapBufferInfo info);
+
+    /**
+     * Called by the framework to read current read/write position in the mmap buffer
+     * with associated time stamp.
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                INVALID_STATE if called out of sequence
+     * @return position a MmapPosition struct containing current HW read/write position in frames
+     *                  with associated time stamp.
+     */
+    getMmapPosition()
+            generates (Result retval, MmapPosition position);
+
+    /**
+     * Called by the framework to deinitialize the stream and free up
+     * all currently allocated resources. It is recommended to close
+     * the stream on the client side as soon as it is becomes unused.
+     *
+     * The client must ensure that this function is not called while
+     * audio data is being transferred through the stream's message queues.
+     *
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED if called on IStream instead of input or
+     *                              output stream interface.
+     *                INVALID_STATE if the stream was already closed.
+     */
+    close() generates (Result retval);
+};
diff --git a/audio/7.0/IStreamIn.hal b/audio/7.0/IStreamIn.hal
new file mode 100644
index 0000000..0a3f24b
--- /dev/null
+++ b/audio/7.0/IStreamIn.hal
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+import android.hardware.audio.common@7.0;
+import IStream;
+
+interface IStreamIn extends IStream {
+    /**
+     * Returns the source descriptor of the input stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_INPUT_SOURCE on the legacy
+     * HAL.
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return source audio source.
+     */
+    getAudioSource() generates (Result retval, AudioSource source);
+
+    /**
+     * Set the input gain for the audio driver.
+     * Optional method
+     *
+     * @param gain 1.0f is unity, 0.0f is zero.
+     * @result retval operation completion status.
+     */
+    setGain(float gain) generates (Result retval);
+
+    /**
+     * Commands that can be executed on the driver reader thread.
+     */
+    enum ReadCommand : int32_t {
+        READ,
+        GET_CAPTURE_POSITION
+    };
+
+    /**
+     * Data structure passed to the driver for executing commands
+     * on the driver reader thread.
+     */
+    struct ReadParameters {
+        ReadCommand command;  // discriminator
+        union Params {
+            uint64_t read;    // READ command, amount of bytes to read, >= 0.
+            // No parameters for GET_CAPTURE_POSITION.
+        } params;
+    };
+
+    /**
+     * Data structure passed back to the client via status message queue
+     * of 'read' operation.
+     *
+     * Possible values of 'retval' field:
+     *  - OK, read operation was successful;
+     *  - INVALID_ARGUMENTS, stream was not configured properly;
+     *  - INVALID_STATE, stream is in a state that doesn't allow reads.
+     */
+    struct ReadStatus {
+        Result retval;
+        ReadCommand replyTo;  // discriminator
+        union Reply {
+            uint64_t read;    // READ command, amount of bytes read, >= 0.
+            struct CapturePosition { // same as generated by getCapturePosition.
+                uint64_t frames;
+                uint64_t time;
+            } capturePosition;
+        } reply;
+    };
+
+    /**
+     * Called when the metadata of the stream's sink has been changed.
+     * @param sinkMetadata Description of the audio that is suggested by the clients.
+     */
+    updateSinkMetadata(SinkMetadata sinkMetadata);
+
+    /**
+     * Set up required transports for receiving audio buffers from the driver.
+     *
+     * The transport consists of three message queues:
+     *  -- command queue is used to instruct the reader thread what operation
+     *     to perform;
+     *  -- data queue is used for passing audio data from the driver
+     *     to the client;
+     *  -- status queue is used for reporting operation status
+     *     (e.g. amount of bytes actually read or error code).
+     *
+     * The driver operates on a dedicated thread. The client must ensure that
+     * the thread is given an appropriate priority and assigned to correct
+     * scheduler and cgroup. For this purpose, the method returns the identifier
+     * of the driver thread.
+     *
+     * @param frameSize the size of a single frame, in bytes.
+     * @param framesCount the number of frames in a buffer.
+     * @param threadPriority priority of the driver thread.
+     * @return retval OK if both message queues were created successfully.
+     *                INVALID_STATE if the method was already called.
+     *                INVALID_ARGUMENTS if there was a problem setting up
+     *                                  the queues.
+     * @return commandMQ a message queue used for passing commands.
+     * @return dataMQ a message queue used for passing audio data in the format
+     *                specified at the stream opening.
+     * @return statusMQ a message queue used for passing status from the driver
+     *                  using ReadStatus structures.
+     * @return threadId identifier of the driver's dedicated thread; the caller
+     *                  may adjust the thread priority to match the priority
+     *                  of the thread that provides audio data.
+     */
+    prepareForReading(uint32_t frameSize, uint32_t framesCount)
+    generates (
+            Result retval,
+            fmq_sync<ReadParameters> commandMQ,
+            fmq_sync<uint8_t> dataMQ,
+            fmq_sync<ReadStatus> statusMQ,
+            int32_t threadId);
+
+    /**
+     * Return the amount of input frames lost in the audio driver since the last
+     * call of this function.
+     *
+     * Audio driver is expected to reset the value to 0 and restart counting
+     * upon returning the current value by this function call. Such loss
+     * typically occurs when the user space process is blocked longer than the
+     * capacity of audio driver buffers.
+     *
+     * @return framesLost the number of input audio frames lost.
+     */
+    getInputFramesLost() generates (uint32_t framesLost);
+
+    /**
+     * Return a recent count of the number of audio frames received and the
+     * clock time associated with that frame count.
+     *
+     * @return retval INVALID_STATE if the device is not ready/available,
+     *                NOT_SUPPORTED if the command is not supported,
+     *                OK otherwise.
+     * @return frames the total frame count received. This must be as early in
+     *                the capture pipeline as possible. In general, frames
+     *                must be non-negative and must not go "backwards".
+     * @return time is the clock monotonic time when frames was measured. In
+     *              general, time must be a positive quantity and must not
+     *              go "backwards".
+     */
+    getCapturePosition()
+            generates (Result retval, uint64_t frames, uint64_t time);
+
+    /**
+     * Returns an array with active microphones in the stream.
+     *
+     * @return retval INVALID_STATE if the call is not successful,
+     *                OK otherwise.
+     *
+     * @return microphones array with microphones info
+     */
+    getActiveMicrophones()
+               generates(Result retval, vec<MicrophoneInfo> microphones);
+
+    /**
+     * Specifies the logical microphone (for processing).
+     *
+     * If the feature is not supported an error should be returned
+     * If multiple microphones are present, this should be treated as a preference
+     * for their combined direction.
+     *
+     * Optional method
+     *
+     * @param Direction constant
+     * @return retval OK if the call is successful, an error code otherwise.
+     */
+    setMicrophoneDirection(MicrophoneDirection direction)
+               generates(Result retval);
+
+    /**
+     * Specifies the zoom factor for the selected microphone (for processing).
+     *
+     * If the feature is not supported an error should be returned
+     * If multiple microphones are present, this should be treated as a preference
+     * for their combined field dimension.
+     *
+     * Optional method
+     *
+     * @param the desired field dimension of microphone capture. Range is from -1 (wide angle),
+     * though 0 (no zoom) to 1 (maximum zoom).
+     *
+     * @return retval OK if the call is not successful, an error code otherwise.
+     */
+    setMicrophoneFieldDimension(float zoom) generates(Result retval);
+};
diff --git a/audio/7.0/IStreamOut.hal b/audio/7.0/IStreamOut.hal
new file mode 100644
index 0000000..38d750f
--- /dev/null
+++ b/audio/7.0/IStreamOut.hal
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+import android.hardware.audio.common@7.0;
+import IStream;
+import IStreamOutCallback;
+import IStreamOutEventCallback;
+
+interface IStreamOut extends IStream {
+    /**
+     * Return the audio hardware driver estimated latency in milliseconds.
+     *
+     * @return latencyMs latency in milliseconds.
+     */
+    getLatency() generates (uint32_t latencyMs);
+
+    /**
+     * This method is used in situations where audio mixing is done in the
+     * hardware. This method serves as a direct interface with hardware,
+     * allowing to directly set the volume as apposed to via the framework.
+     * This method might produce multiple PCM outputs or hardware accelerated
+     * codecs, such as MP3 or AAC.
+     * Optional method
+     *
+     * @param left left channel attenuation, 1.0f is unity, 0.0f is zero.
+     * @param right right channel attenuation, 1.0f is unity, 0.0f is zero.
+     * @return retval operation completion status.
+     *        If a volume is outside [0,1], return INVALID_ARGUMENTS
+     */
+    setVolume(float left, float right) generates (Result retval);
+
+    /**
+     * Commands that can be executed on the driver writer thread.
+     */
+    enum WriteCommand : int32_t {
+        WRITE,
+        GET_PRESENTATION_POSITION,
+        GET_LATENCY
+    };
+
+    /**
+     * Data structure passed back to the client via status message queue
+     * of 'write' operation.
+     *
+     * Possible values of 'retval' field:
+     *  - OK, write operation was successful;
+     *  - INVALID_ARGUMENTS, stream was not configured properly;
+     *  - INVALID_STATE, stream is in a state that doesn't allow writes;
+     *  - INVALID_OPERATION, retrieving presentation position isn't supported.
+     */
+    struct WriteStatus {
+        Result retval;
+        WriteCommand replyTo;  // discriminator
+        union Reply {
+            uint64_t written;  // WRITE command, amount of bytes written, >= 0.
+            struct PresentationPosition {  // same as generated by
+                uint64_t frames;           // getPresentationPosition.
+                TimeSpec timeStamp;
+            } presentationPosition;
+            uint32_t latencyMs; // Same as generated by getLatency.
+        } reply;
+    };
+
+    /**
+     * Called when the metadata of the stream's source has been changed.
+     * @param sourceMetadata Description of the audio that is played by the clients.
+     */
+    updateSourceMetadata(SourceMetadata sourceMetadata);
+
+    /**
+     * Set up required transports for passing audio buffers to the driver.
+     *
+     * The transport consists of three message queues:
+     *  -- command queue is used to instruct the writer thread what operation
+     *     to perform;
+     *  -- data queue is used for passing audio data from the client
+     *     to the driver;
+     *  -- status queue is used for reporting operation status
+     *     (e.g. amount of bytes actually written or error code).
+     *
+     * The driver operates on a dedicated thread. The client must ensure that
+     * the thread is given an appropriate priority and assigned to correct
+     * scheduler and cgroup. For this purpose, the method returns the identifier
+     * of the driver thread.
+     *
+     * @param frameSize the size of a single frame, in bytes.
+     * @param framesCount the number of frames in a buffer.
+     * @return retval OK if both message queues were created successfully.
+     *                INVALID_STATE if the method was already called.
+     *                INVALID_ARGUMENTS if there was a problem setting up
+     *                                  the queues.
+     * @return commandMQ a message queue used for passing commands.
+     * @return dataMQ a message queue used for passing audio data in the format
+     *                specified at the stream opening.
+     * @return statusMQ a message queue used for passing status from the driver
+     *                  using WriteStatus structures.
+     * @return threadId identifier of the driver's dedicated thread; the caller
+     *                  may adjust the thread priority to match the priority
+     *                  of the thread that provides audio data.
+     */
+    prepareForWriting(uint32_t frameSize, uint32_t framesCount)
+    generates (
+            Result retval,
+            fmq_sync<WriteCommand> commandMQ,
+            fmq_sync<uint8_t> dataMQ,
+            fmq_sync<WriteStatus> statusMQ,
+            int32_t threadId);
+
+    /**
+     * Return the number of audio frames written by the audio DSP to DAC since
+     * the output has exited standby.
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return dspFrames number of audio frames written.
+     */
+    getRenderPosition() generates (Result retval, uint32_t dspFrames);
+
+    /**
+     * Get the local time at which the next write to the audio driver will be
+     * presented. The units are microseconds, where the epoch is decided by the
+     * local audio HAL.
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return timestampUs time of the next write.
+     */
+    getNextWriteTimestamp() generates (Result retval, int64_t timestampUs);
+
+    /**
+     * Set the callback interface for notifying completion of non-blocking
+     * write and drain.
+     *
+     * Calling this function implies that all future 'write' and 'drain'
+     * must be non-blocking and use the callback to signal completion.
+     *
+     * 'clearCallback' method needs to be called in order to release the local
+     * callback proxy on the server side and thus dereference the callback
+     * implementation on the client side.
+     *
+     * @return retval operation completion status.
+     */
+    setCallback(IStreamOutCallback callback) generates (Result retval);
+
+    /**
+     * Clears the callback previously set via 'setCallback' method.
+     *
+     * Warning: failure to call this method results in callback implementation
+     * on the client side being held until the HAL server termination.
+     *
+     * If no callback was previously set, the method should be a no-op
+     * and return OK.
+     *
+     * @return retval operation completion status: OK or NOT_SUPPORTED.
+     */
+    clearCallback() generates (Result retval);
+
+    /**
+     * Set the callback interface for notifying about an output stream event.
+     *
+     * Calling this method with a null pointer will result in releasing
+     * the local callback proxy on the server side and thus dereference
+     * the callback implementation on the client side.
+     *
+     * @return retval operation completion status.
+     */
+    setEventCallback(IStreamOutEventCallback callback)
+            generates (Result retval);
+
+    /**
+     * Returns whether HAL supports pausing and resuming of streams.
+     *
+     * @return supportsPause true if pausing is supported.
+     * @return supportsResume true if resume is supported.
+     */
+    supportsPauseAndResume()
+            generates (bool supportsPause, bool supportsResume);
+
+    /**
+     * Notifies to the audio driver to stop playback however the queued buffers
+     * are retained by the hardware. Useful for implementing pause/resume. Empty
+     * implementation if not supported however must be implemented for hardware
+     * with non-trivial latency. In the pause state, some audio hardware may
+     * still be using power. Client code may consider calling 'suspend' after a
+     * timeout to prevent that excess power usage.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    pause() generates (Result retval);
+
+    /**
+     * Notifies to the audio driver to resume playback following a pause.
+     * Returns error INVALID_STATE if called without matching pause.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    resume() generates (Result retval);
+
+    /**
+     * Returns whether HAL supports draining of streams.
+     *
+     * @return supports true if draining is supported.
+     */
+    supportsDrain() generates (bool supports);
+
+    /**
+     * Requests notification when data buffered by the driver/hardware has been
+     * played. If 'setCallback' has previously been called to enable
+     * non-blocking mode, then 'drain' must not block, instead it must return
+     * quickly and completion of the drain is notified through the callback. If
+     * 'setCallback' has not been called, then 'drain' must block until
+     * completion.
+     *
+     * If 'type' is 'ALL', the drain completes when all previously written data
+     * has been played.
+     *
+     * If 'type' is 'EARLY_NOTIFY', the drain completes shortly before all data
+     * for the current track has played to allow time for the framework to
+     * perform a gapless track switch.
+     *
+     * Drain must return immediately on 'stop' and 'flush' calls.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @param type type of drain.
+     * @return retval operation completion status.
+     */
+    drain(AudioDrain type) generates (Result retval);
+
+    /**
+     * Notifies to the audio driver to flush the queued data. Stream must
+     * already be paused before calling 'flush'.
+     * Optional method
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    flush() generates (Result retval);
+
+    /**
+     * Return a recent count of the number of audio frames presented to an
+     * external observer. This excludes frames which have been written but are
+     * still in the pipeline. The count is not reset to zero when output enters
+     * standby. Also returns the value of CLOCK_MONOTONIC as of this
+     * presentation count. The returned count is expected to be 'recent', but
+     * does not need to be the most recent possible value. However, the
+     * associated time must correspond to whatever count is returned.
+     *
+     * Example: assume that N+M frames have been presented, where M is a 'small'
+     * number. Then it is permissible to return N instead of N+M, and the
+     * timestamp must correspond to N rather than N+M. The terms 'recent' and
+     * 'small' are not defined. They reflect the quality of the implementation.
+     *
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return frames count of presented audio frames.
+     * @return timeStamp associated clock time.
+     */
+    getPresentationPosition()
+            generates (Result retval, uint64_t frames, TimeSpec timeStamp);
+
+    /**
+     * Selects a presentation for decoding from a next generation media stream
+     * (as defined per ETSI TS 103 190-2) and a program within the presentation.
+     * Optional method
+     *
+     * @param presentationId selected audio presentation.
+     * @param programId refinement for the presentation.
+     * @return retval operation completion status.
+     */
+    selectPresentation(int32_t presentationId, int32_t programId)
+            generates (Result retval);
+
+    /**
+     * Returns the Dual Mono mode presentation setting.
+     *
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return mode current setting of Dual Mono mode.
+     */
+    getDualMonoMode() generates (Result retval, DualMonoMode mode);
+
+    /**
+     * Sets the Dual Mono mode presentation on the output device.
+     *
+     * The Dual Mono mode is generally applied to stereo audio streams
+     * where the left and right channels come from separate sources.
+     *
+     * Optional method
+     *
+     * @param mode selected Dual Mono mode.
+     * @return retval operation completion status.
+     */
+    setDualMonoMode(DualMonoMode mode) generates (Result retval);
+
+    /**
+     * Returns the Audio Description Mix level in dB.
+     *
+     * The level is applied to streams incorporating a secondary Audio
+     * Description stream. It specifies the relative level of mixing for
+     * the Audio Description with a reference to the Main Audio.
+     *
+     * Optional method
+     *
+     * The value of the relative level is in the range from negative infinity
+     * to +48.
+     *
+     * @return retval operation completion status.
+     * @return leveldB the current Audio Description Mix Level in dB.
+     */
+    getAudioDescriptionMixLevel() generates (Result retval, float leveldB);
+
+    /**
+     * Sets the Audio Description Mix level in dB.
+     *
+     * For streams incorporating a secondary Audio Description stream
+     * the relative level of mixing of the Audio Description to the Main Audio
+     * is controlled by this method.
+     *
+     * Optional method
+     *
+     * The value of the relative level must be in the range from negative
+     * infinity to +48.
+     *
+     * @param leveldB Audio Description Mix Level in dB
+     * @return retval operation completion status.
+     */
+    setAudioDescriptionMixLevel(float leveldB) generates (Result retval);
+
+    /**
+     * Retrieves current playback rate parameters.
+     *
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return playbackRate current playback parameters
+     */
+    getPlaybackRateParameters()
+            generates (Result retval, PlaybackRate playbackRate);
+
+    /**
+     * Sets the playback rate parameters that control playback behavior.
+     * This is normally used when playing encoded content and decoding
+     * is performed in hardware. Otherwise, the framework can apply
+     * necessary transformations.
+     *
+     * Optional method
+     *
+     * If the HAL supports setting the playback rate, it is recommended
+     * to support speed and pitch values at least in the range
+     * from 0.5f to 2.0f, inclusive (see the definition of PlaybackRate struct).
+     *
+     * @param playbackRate playback parameters
+     * @return retval operation completion status.
+     */
+    setPlaybackRateParameters(PlaybackRate playbackRate)
+            generates (Result retval);
+};
diff --git a/audio/7.0/IStreamOutCallback.hal b/audio/7.0/IStreamOutCallback.hal
new file mode 100644
index 0000000..7b9d47f
--- /dev/null
+++ b/audio/7.0/IStreamOutCallback.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+/**
+ * Asynchronous write callback interface.
+ */
+interface IStreamOutCallback {
+    /**
+     * Non blocking write completed.
+     */
+    oneway onWriteReady();
+
+    /**
+     * Drain completed.
+     */
+    oneway onDrainReady();
+
+    /**
+     * Stream hit an error.
+     */
+    oneway onError();
+};
diff --git a/audio/7.0/IStreamOutEventCallback.hal b/audio/7.0/IStreamOutEventCallback.hal
new file mode 100644
index 0000000..52e65d3
--- /dev/null
+++ b/audio/7.0/IStreamOutEventCallback.hal
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+/**
+ * Asynchronous stream out event callback interface. The interface provides
+ * a way for the HAL to notify platform when there are changes, e.g. codec
+ * format change, from the lower layer.
+ */
+interface IStreamOutEventCallback {
+    /**
+     * Codec format changed.
+     *
+     * onCodecFormatChanged returns an AudioMetadata object in read-only ByteString format.
+     * It represents the most recent codec format decoded by a HW audio decoder.
+     *
+     * Codec format is an optional message from HW audio decoders. It serves to
+     * notify the application about the codec format and audio objects contained
+     * within the compressed audio stream for control, informational,
+     * and display purposes.
+     *
+     * audioMetadata ByteString is convertible to an AudioMetadata object through
+     * both a C++ and a C API present in Metadata.h [1], or through a Java API present
+     * in AudioMetadata.java [2].
+     *
+     * The ByteString format is a stable format used for parcelling (marshalling) across
+     * JNI, AIDL, and HIDL interfaces.  The test for R compatibility for native marshalling
+     * is TEST(metadata_tests, compatibility_R) [3].  The test for R compatibility for JNI
+     * marshalling is android.media.cts.AudioMetadataTest#testCompatibilityR [4].
+     *
+     * R (audio HAL 7.0) defined keys are as follows [2]:
+     * "bitrate", int32
+     * "channel-mask", int32
+     * "mime", string
+     * "sample-rate", int32
+     * "bit-width", int32
+     * "has-atmos", int32
+     * "audio-encoding", int32
+     *
+     * Parceling Format:
+     * All values are native endian order. [1]
+     *
+     * using type_size_t = uint32_t;
+     * using index_size_t = uint32_t;
+     * using datum_size_t = uint32_t;
+     *
+     * Permitted type indexes are
+     * TYPE_NONE = 0, // Reserved
+     * TYPE_INT32 = 1,
+     * TYPE_INT64 = 2,
+     * TYPE_FLOAT = 3,
+     * TYPE_DOUBLE = 4,
+     * TYPE_STRING = 5,
+     * TYPE_DATA = 6,  // A data table of <String, Datum>
+     *
+     * Datum = {
+     *           (type_size_t)  Type (the type index from type_as_value<T>.)
+     *           (datum_size_t) Size (size of the Payload)
+     *           (byte string)  Payload<Type>
+     *         }
+     *
+     * The data is specified in native endian order.
+     * Since the size of the Payload is always present, unknown types may be skipped.
+     *
+     * Payload<Fixed-size Primitive_Value>
+     * [ sizeof(Primitive_Value) in raw bytes ]
+     *
+     * Example of Payload<Int32> of 123:
+     * Payload<Int32>
+     * [ value of 123                   ] =  0x7b 0x00 0x00 0x00       123
+     *
+     * Payload<String>
+     * [ (index_size_t) length, not including zero terminator.]
+     * [ (length) raw bytes ]
+     *
+     * Example of Payload<String> of std::string("hi"):
+     * [ (index_size_t) length          ] = 0x02 0x00 0x00 0x00        2 strlen("hi")
+     * [ raw bytes "hi"                 ] = 0x68 0x69                  "hi"
+     *
+     * Payload<Data>
+     * [ (index_size_t) entries ]
+     * [ raw bytes   (entry 1) Key   (Payload<String>)
+     *                         Value (Datum)
+     *                ...  (until #entries) ]
+     *
+     * Example of Payload<Data> of {{"hello", "world"},
+     *                              {"value", (int32_t)1000}};
+     * [ (index_size_t) #entries        ] = 0x02 0x00 0x00 0x00        2 entries
+     *    Key (Payload<String>)
+     *    [ index_size_t length         ] = 0x05 0x00 0x00 0x00        5 strlen("hello")
+     *    [ raw bytes "hello"           ] = 0x68 0x65 0x6c 0x6c 0x6f   "hello"
+     *    Value (Datum)
+     *    [ (type_size_t) type          ] = 0x05 0x00 0x00 0x00        5 (TYPE_STRING)
+     *    [ (datum_size_t) size         ] = 0x09 0x00 0x00 0x00        sizeof(index_size_t) +
+     *                                                                 strlen("world")
+     *       Payload<String>
+     *       [ (index_size_t) length    ] = 0x05 0x00 0x00 0x00        5 strlen("world")
+     *       [ raw bytes "world"        ] = 0x77 0x6f 0x72 0x6c 0x64   "world"
+     *    Key (Payload<String>)
+     *    [ index_size_t length         ] = 0x05 0x00 0x00 0x00        5 strlen("value")
+     *    [ raw bytes "value"           ] = 0x76 0x61 0x6c 0x75 0x65   "value"
+     *    Value (Datum)
+     *    [ (type_size_t) type          ] = 0x01 0x00 0x00 0x00        1 (TYPE_INT32)
+     *    [ (datum_size_t) size         ] = 0x04 0x00 0x00 0x00        4 sizeof(int32_t)
+     *        Payload<Int32>
+     *        [ raw bytes 1000          ] = 0xe8 0x03 0x00 0x00        1000
+     *
+     * The contents of audioMetadata is a Payload<Data>.
+     * An implementation dependent detail is that the Keys are always
+     * stored sorted, so the byte string representation generated is unique.
+     *
+     * Vendor keys are allowed for informational and debugging purposes.
+     * Vendor keys should consist of the vendor company name followed
+     * by a dot; for example, "vendorCompany.someVolume" [2].
+     *
+     * [1] system/media/audio_utils/include/audio_utils/Metadata.h
+     * [2] frameworks/base/media/java/android/media/AudioMetadata.java
+     * [3] system/media/audio_utils/tests/metadata_tests.cpp
+     * [4] cts/tests/tests/media/src/android/media/cts/AudioMetadataTest.java
+     *
+     * @param audioMetadata is a buffer containing decoded format changes
+     *     reported by codec. The buffer contains data that can be transformed
+     *     to audio metadata, which is a C++ object based map.
+     */
+    oneway onCodecFormatChanged(vec<uint8_t> audioMetadata);
+};
diff --git a/audio/7.0/config/Android.bp b/audio/7.0/config/Android.bp
new file mode 100644
index 0000000..015c424
--- /dev/null
+++ b/audio/7.0/config/Android.bp
@@ -0,0 +1,5 @@
+xsd_config {
+    name: "audio_policy_configuration_V7_0",
+    srcs: ["audio_policy_configuration.xsd"],
+    package_name: "audio.policy.configuration.V7_0",
+}
diff --git a/audio/7.0/config/api/current.txt b/audio/7.0/config/api/current.txt
new file mode 100644
index 0000000..fd9a8ef
--- /dev/null
+++ b/audio/7.0/config/api/current.txt
@@ -0,0 +1,534 @@
+// Signature format: 2.0
+package audio.policy.configuration.V7_0 {
+
+  public class AttachedDevices {
+    ctor public AttachedDevices();
+    method public java.util.List<java.lang.String> getItem();
+  }
+
+  public enum AudioChannelMask {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_10;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_11;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_12;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_13;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_14;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_15;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_16;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_17;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_18;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_19;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_20;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_21;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_22;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_23;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_24;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_3;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_4;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_5;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_6;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_7;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_8;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_INDEX_MASK_9;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_2POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_2POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_3POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_3POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_5POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_6;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_FRONT_BACK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_STEREO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_VOICE_CALL_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_VOICE_DNLINK_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_IN_VOICE_UPLINK_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_2POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_2POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_2POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_3POINT0POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_3POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1POINT4;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1_BACK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_5POINT1_SIDE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_6POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_7POINT1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_7POINT1POINT2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_7POINT1POINT4;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_HAPTIC_AB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_MONO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_MONO_HAPTIC_A;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_MONO_HAPTIC_AB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_PENTA;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_QUAD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_QUAD_BACK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_QUAD_SIDE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_STEREO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_STEREO_HAPTIC_A;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_STEREO_HAPTIC_AB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioChannelMask AUDIO_CHANNEL_OUT_SURROUND;
+  }
+
+  public enum AudioContentType {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_MOVIE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_MUSIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_SONIFICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_SPEECH;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioContentType AUDIO_CONTENT_TYPE_UNKNOWN;
+  }
+
+  public enum AudioDevice {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_AMBIENT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_AUX_DIGITAL;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BACK_MIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_A2DP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_BLE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BUILTIN_MIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_BUS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_ECHO_REFERENCE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_FM_TUNER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_HDMI;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_HDMI_ARC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_IP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_LINE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_LOOPBACK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_PROXY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_SPDIF;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_STUB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_TELEPHONY_RX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_TV_TUNER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_USB_ACCESSORY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_USB_DEVICE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_USB_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_VOICE_CALL;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_IN_WIRED_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_NONE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_AUX_DIGITAL;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_AUX_LINE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_BUS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_EARPIECE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_ECHO_CANCELLER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_FM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_HDMI;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_HDMI_ARC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_HEARING_AID;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_IP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_LINE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_PROXY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_SPDIF;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_SPEAKER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_SPEAKER_SAFE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_STUB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_TELEPHONY_TX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_USB_ACCESSORY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_USB_DEVICE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_USB_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_WIRED_HEADPHONE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioDevice AUDIO_DEVICE_OUT_WIRED_HEADSET;
+  }
+
+  public enum AudioFormat {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADIF;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_ELD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_ERLC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_HE_V1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_HE_V2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LTP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_MAIN;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_SCALABLE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_SSR;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_XHE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ELD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_ERLC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_HE_V1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_HE_V2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_LATM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_LATM_HE_V1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_LATM_HE_V2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_LATM_LC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_LC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_LD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_LTP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_MAIN;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_SCALABLE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_SSR;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AAC_XHE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AC3;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AC4;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_ALAC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AMR_NB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AMR_WB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_AMR_WB_PLUS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_APE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_APTX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_APTX_ADAPTIVE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_APTX_HD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_APTX_TWSP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_CELT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_DOLBY_TRUEHD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_DSD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_DTS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_DTS_HD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_EVRC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_EVRCB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_EVRCNW;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_EVRCWB;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_E_AC3;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_E_AC3_JOC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_FLAC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_HE_AAC_V1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_HE_AAC_V2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_IEC61937;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_LDAC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_LHDC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_LHDC_LL;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MAT_1_0;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MAT_2_0;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MAT_2_1;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MP2;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_MP3;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_OPUS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_PCM_16_BIT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_PCM_24_BIT_PACKED;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_PCM_32_BIT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_PCM_8_24_BIT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_PCM_8_BIT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_PCM_FLOAT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_QCELP;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_SBC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_VORBIS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_WMA;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioFormat AUDIO_FORMAT_WMA_PRO;
+  }
+
+  public class AudioPolicyConfiguration {
+    ctor public AudioPolicyConfiguration();
+    method public audio.policy.configuration.V7_0.GlobalConfiguration getGlobalConfiguration();
+    method public java.util.List<audio.policy.configuration.V7_0.Modules> getModules();
+    method public audio.policy.configuration.V7_0.SurroundSound getSurroundSound();
+    method public audio.policy.configuration.V7_0.Version getVersion();
+    method public java.util.List<audio.policy.configuration.V7_0.Volumes> getVolumes();
+    method public void setGlobalConfiguration(audio.policy.configuration.V7_0.GlobalConfiguration);
+    method public void setSurroundSound(audio.policy.configuration.V7_0.SurroundSound);
+    method public void setVersion(audio.policy.configuration.V7_0.Version);
+  }
+
+  public enum AudioSource {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_CAMCORDER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_ECHO_REFERENCE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_FM_TUNER;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_HOTWORD;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_MIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_UNPROCESSED;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_CALL;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_DOWNLINK;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_PERFORMANCE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_RECOGNITION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioSource AUDIO_SOURCE_VOICE_UPLINK;
+  }
+
+  public enum AudioStreamType {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ACCESSIBILITY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ALARM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_BLUETOOTH_SCO;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_DTMF;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_ENFORCED_AUDIBLE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_MUSIC;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_NOTIFICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_PATCH;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_REROUTING;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_RING;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_SYSTEM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_TTS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioStreamType AUDIO_STREAM_VOICE_CALL;
+  }
+
+  public enum AudioUsage {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ALARM;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ANNOUNCEMENT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANCE_SONIFICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_CALL_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_EMERGENCY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_GAME;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_MEDIA;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_NOTIFICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_SAFETY;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_UNKNOWN;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VEHICLE_STATUS;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VIRTUAL_SOURCE;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V7_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING;
+  }
+
+  public enum DeviceCategory {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.DeviceCategory DEVICE_CATEGORY_EARPIECE;
+    enum_constant public static final audio.policy.configuration.V7_0.DeviceCategory DEVICE_CATEGORY_EXT_MEDIA;
+    enum_constant public static final audio.policy.configuration.V7_0.DeviceCategory DEVICE_CATEGORY_HEADSET;
+    enum_constant public static final audio.policy.configuration.V7_0.DeviceCategory DEVICE_CATEGORY_HEARING_AID;
+    enum_constant public static final audio.policy.configuration.V7_0.DeviceCategory DEVICE_CATEGORY_SPEAKER;
+  }
+
+  public class DevicePorts {
+    ctor public DevicePorts();
+    method public java.util.List<audio.policy.configuration.V7_0.DevicePorts.DevicePort> getDevicePort();
+  }
+
+  public static class DevicePorts.DevicePort {
+    ctor public DevicePorts.DevicePort();
+    method public String getAddress();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioFormat> getEncodedFormats();
+    method public audio.policy.configuration.V7_0.Gains getGains();
+    method public java.util.List<audio.policy.configuration.V7_0.Profile> getProfile();
+    method public audio.policy.configuration.V7_0.Role getRole();
+    method public String getTagName();
+    method public String getType();
+    method public boolean get_default();
+    method public void setAddress(String);
+    method public void setEncodedFormats(java.util.List<audio.policy.configuration.V7_0.AudioFormat>);
+    method public void setGains(audio.policy.configuration.V7_0.Gains);
+    method public void setRole(audio.policy.configuration.V7_0.Role);
+    method public void setTagName(String);
+    method public void setType(String);
+    method public void set_default(boolean);
+  }
+
+  public enum EngineSuffix {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.EngineSuffix _default;
+    enum_constant public static final audio.policy.configuration.V7_0.EngineSuffix configurable;
+  }
+
+  public enum GainMode {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.GainMode AUDIO_GAIN_MODE_CHANNELS;
+    enum_constant public static final audio.policy.configuration.V7_0.GainMode AUDIO_GAIN_MODE_JOINT;
+    enum_constant public static final audio.policy.configuration.V7_0.GainMode AUDIO_GAIN_MODE_RAMP;
+  }
+
+  public class Gains {
+    ctor public Gains();
+    method public java.util.List<audio.policy.configuration.V7_0.Gains.Gain> getGain();
+  }
+
+  public static class Gains.Gain {
+    ctor public Gains.Gain();
+    method public audio.policy.configuration.V7_0.AudioChannelMask getChannel_mask();
+    method public int getDefaultValueMB();
+    method public int getMaxRampMs();
+    method public int getMaxValueMB();
+    method public int getMinRampMs();
+    method public int getMinValueMB();
+    method public audio.policy.configuration.V7_0.GainMode getMode();
+    method public String getName();
+    method public int getStepValueMB();
+    method public boolean getUseForVolume();
+    method public void setChannel_mask(audio.policy.configuration.V7_0.AudioChannelMask);
+    method public void setDefaultValueMB(int);
+    method public void setMaxRampMs(int);
+    method public void setMaxValueMB(int);
+    method public void setMinRampMs(int);
+    method public void setMinValueMB(int);
+    method public void setMode(audio.policy.configuration.V7_0.GainMode);
+    method public void setName(String);
+    method public void setStepValueMB(int);
+    method public void setUseForVolume(boolean);
+  }
+
+  public class GlobalConfiguration {
+    ctor public GlobalConfiguration();
+    method public boolean getCall_screen_mode_supported();
+    method public audio.policy.configuration.V7_0.EngineSuffix getEngine_library();
+    method public boolean getSpeaker_drc_enabled();
+    method public void setCall_screen_mode_supported(boolean);
+    method public void setEngine_library(audio.policy.configuration.V7_0.EngineSuffix);
+    method public void setSpeaker_drc_enabled(boolean);
+  }
+
+  public enum HalVersion {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.HalVersion _2_0;
+    enum_constant public static final audio.policy.configuration.V7_0.HalVersion _3_0;
+  }
+
+  public class MixPorts {
+    ctor public MixPorts();
+    method public java.util.List<audio.policy.configuration.V7_0.MixPorts.MixPort> getMixPort();
+  }
+
+  public static class MixPorts.MixPort {
+    ctor public MixPorts.MixPort();
+    method public String getFlags();
+    method public audio.policy.configuration.V7_0.Gains getGains();
+    method public long getMaxActiveCount();
+    method public long getMaxOpenCount();
+    method public String getName();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioUsage> getPreferredUsage();
+    method public java.util.List<audio.policy.configuration.V7_0.Profile> getProfile();
+    method public audio.policy.configuration.V7_0.Role getRole();
+    method public void setFlags(String);
+    method public void setGains(audio.policy.configuration.V7_0.Gains);
+    method public void setMaxActiveCount(long);
+    method public void setMaxOpenCount(long);
+    method public void setName(String);
+    method public void setPreferredUsage(java.util.List<audio.policy.configuration.V7_0.AudioUsage>);
+    method public void setRole(audio.policy.configuration.V7_0.Role);
+  }
+
+  public enum MixType {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.MixType mix;
+    enum_constant public static final audio.policy.configuration.V7_0.MixType mux;
+  }
+
+  public class Modules {
+    ctor public Modules();
+    method public java.util.List<audio.policy.configuration.V7_0.Modules.Module> getModule();
+  }
+
+  public static class Modules.Module {
+    ctor public Modules.Module();
+    method public audio.policy.configuration.V7_0.AttachedDevices getAttachedDevices();
+    method public String getDefaultOutputDevice();
+    method public audio.policy.configuration.V7_0.DevicePorts getDevicePorts();
+    method public audio.policy.configuration.V7_0.HalVersion getHalVersion();
+    method public audio.policy.configuration.V7_0.MixPorts getMixPorts();
+    method public String getName();
+    method public audio.policy.configuration.V7_0.Routes getRoutes();
+    method public void setAttachedDevices(audio.policy.configuration.V7_0.AttachedDevices);
+    method public void setDefaultOutputDevice(String);
+    method public void setDevicePorts(audio.policy.configuration.V7_0.DevicePorts);
+    method public void setHalVersion(audio.policy.configuration.V7_0.HalVersion);
+    method public void setMixPorts(audio.policy.configuration.V7_0.MixPorts);
+    method public void setName(String);
+    method public void setRoutes(audio.policy.configuration.V7_0.Routes);
+  }
+
+  public class Profile {
+    ctor public Profile();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioChannelMask> getChannelMasks();
+    method public String getFormat();
+    method public String getName();
+    method public java.util.List<java.math.BigInteger> getSamplingRates();
+    method public void setChannelMasks(java.util.List<audio.policy.configuration.V7_0.AudioChannelMask>);
+    method public void setFormat(String);
+    method public void setName(String);
+    method public void setSamplingRates(java.util.List<java.math.BigInteger>);
+  }
+
+  public class Reference {
+    ctor public Reference();
+    method public String getName();
+    method public java.util.List<java.lang.String> getPoint();
+    method public void setName(String);
+  }
+
+  public enum Role {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.Role sink;
+    enum_constant public static final audio.policy.configuration.V7_0.Role source;
+  }
+
+  public class Routes {
+    ctor public Routes();
+    method public java.util.List<audio.policy.configuration.V7_0.Routes.Route> getRoute();
+  }
+
+  public static class Routes.Route {
+    ctor public Routes.Route();
+    method public String getSink();
+    method public String getSources();
+    method public audio.policy.configuration.V7_0.MixType getType();
+    method public void setSink(String);
+    method public void setSources(String);
+    method public void setType(audio.policy.configuration.V7_0.MixType);
+  }
+
+  public class SurroundFormats {
+    ctor public SurroundFormats();
+    method public java.util.List<audio.policy.configuration.V7_0.SurroundFormats.Format> getFormat();
+  }
+
+  public static class SurroundFormats.Format {
+    ctor public SurroundFormats.Format();
+    method public audio.policy.configuration.V7_0.AudioFormat getName();
+    method public java.util.List<audio.policy.configuration.V7_0.AudioFormat> getSubformats();
+    method public void setName(audio.policy.configuration.V7_0.AudioFormat);
+    method public void setSubformats(java.util.List<audio.policy.configuration.V7_0.AudioFormat>);
+  }
+
+  public class SurroundSound {
+    ctor public SurroundSound();
+    method public audio.policy.configuration.V7_0.SurroundFormats getFormats();
+    method public void setFormats(audio.policy.configuration.V7_0.SurroundFormats);
+  }
+
+  public enum Version {
+    method public String getRawName();
+    enum_constant public static final audio.policy.configuration.V7_0.Version _1_0;
+  }
+
+  public class Volume {
+    ctor public Volume();
+    method public audio.policy.configuration.V7_0.DeviceCategory getDeviceCategory();
+    method public java.util.List<java.lang.String> getPoint();
+    method public String getRef();
+    method public audio.policy.configuration.V7_0.AudioStreamType getStream();
+    method public void setDeviceCategory(audio.policy.configuration.V7_0.DeviceCategory);
+    method public void setRef(String);
+    method public void setStream(audio.policy.configuration.V7_0.AudioStreamType);
+  }
+
+  public class Volumes {
+    ctor public Volumes();
+    method public java.util.List<audio.policy.configuration.V7_0.Reference> getReference();
+    method public java.util.List<audio.policy.configuration.V7_0.Volume> getVolume();
+  }
+
+  public class XmlParser {
+    ctor public XmlParser();
+    method public static audio.policy.configuration.V7_0.AudioPolicyConfiguration read(java.io.InputStream) throws javax.xml.datatype.DatatypeConfigurationException, java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static String readText(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static void skip(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+  }
+
+}
+
diff --git a/audio/7.0/config/api/last_current.txt b/audio/7.0/config/api/last_current.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/7.0/config/api/last_current.txt
diff --git a/audio/7.0/config/api/last_removed.txt b/audio/7.0/config/api/last_removed.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/7.0/config/api/last_removed.txt
diff --git a/audio/7.0/config/api/removed.txt b/audio/7.0/config/api/removed.txt
new file mode 100644
index 0000000..d802177
--- /dev/null
+++ b/audio/7.0/config/api/removed.txt
@@ -0,0 +1 @@
+// Signature format: 2.0
diff --git a/audio/7.0/config/audio_policy_configuration.xsd b/audio/7.0/config/audio_policy_configuration.xsd
new file mode 100644
index 0000000..4555a88
--- /dev/null
+++ b/audio/7.0/config/audio_policy_configuration.xsd
@@ -0,0 +1,748 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+
+         Licensed under the Apache License, Version 2.0 (the "License");
+         you may not use this file except in compliance with the License.
+         You may obtain a copy of the License at
+
+                    http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing, software
+         distributed under the License is distributed on an "AS IS" BASIS,
+         WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+         See the License for the specific language governing permissions and
+         limitations under the License.
+-->
+<xs:schema version="2.0"
+           elementFormDefault="qualified"
+           attributeFormDefault="unqualified"
+           xmlns:xs="http://www.w3.org/2001/XMLSchema">
+    <!-- List the config versions supported by audio policy. -->
+    <xs:simpleType name="version">
+        <xs:restriction base="xs:decimal">
+            <xs:enumeration value="1.0"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="halVersion">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Version of the interface the hal implements. Note that this
+                relates to legacy HAL API versions since HIDL APIs are versioned
+                using other mechanisms.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:decimal">
+            <!-- List of HAL versions supported by the framework. -->
+            <xs:enumeration value="2.0"/>
+            <xs:enumeration value="3.0"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:element name="audioPolicyConfiguration">
+        <xs:complexType>
+            <xs:sequence>
+                <xs:element name="globalConfiguration" type="globalConfiguration"/>
+                <xs:element name="modules" type="modules" maxOccurs="unbounded"/>
+                <xs:element name="volumes" type="volumes" maxOccurs="unbounded"/>
+                <xs:element name="surroundSound" type="surroundSound" minOccurs="0" />
+            </xs:sequence>
+            <xs:attribute name="version" type="version"/>
+        </xs:complexType>
+        <xs:key name="moduleNameKey">
+            <xs:selector xpath="modules/module"/>
+            <xs:field xpath="@name"/>
+        </xs:key>
+        <xs:unique name="volumeTargetUniqueness">
+            <xs:selector xpath="volumes/volume"/>
+            <xs:field xpath="@stream"/>
+            <xs:field xpath="@deviceCategory"/>
+        </xs:unique>
+        <xs:key name="volumeCurveNameKey">
+            <xs:selector xpath="volumes/reference"/>
+            <xs:field xpath="@name"/>
+        </xs:key>
+        <xs:keyref name="volumeCurveRef" refer="volumeCurveNameKey">
+            <xs:selector xpath="volumes/volume"/>
+            <xs:field xpath="@ref"/>
+        </xs:keyref>
+    </xs:element>
+    <xs:complexType name="globalConfiguration">
+        <xs:attribute name="speaker_drc_enabled" type="xs:boolean" use="required"/>
+        <xs:attribute name="call_screen_mode_supported" type="xs:boolean" use="optional"/>
+        <xs:attribute name="engine_library" type="engineSuffix" use="optional"/>
+    </xs:complexType>
+    <xs:complexType name="modules">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                There should be one section per audio HW module present on the platform.
+                Each <module/> contains two mandatory tags: “halVersion” and “name”.
+                The module "name" is the same as in previous .conf file.
+                Each module must contain the following sections:
+                 - <devicePorts/>: a list of device descriptors for all
+                   input and output devices accessible via this module.
+                   This contains both permanently attached devices and removable devices.
+                 - <mixPorts/>: listing all output and input streams exposed by the audio HAL
+                 - <routes/>: list of possible connections between input
+                   and output devices or between stream and devices.
+                   A <route/> is defined by a set of 3 attributes:
+                        -"type": mux|mix means all sources are mutual exclusive (mux) or can be mixed (mix)
+                        -"sink": the sink involved in this route
+                        -"sources": all the sources than can be connected to the sink via this route
+                 - <attachedDevices/>: permanently attached devices.
+                   The attachedDevices section is a list of devices names.
+                   Their names correspond to device names defined in "devicePorts" section.
+                 - <defaultOutputDevice/> is the device to be used when no policy rule applies
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="module" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="attachedDevices" type="attachedDevices" minOccurs="0">
+                            <xs:unique name="attachedDevicesUniqueness">
+                                <xs:selector xpath="item"/>
+                                <xs:field xpath="."/>
+                            </xs:unique>
+                        </xs:element>
+                        <xs:element name="defaultOutputDevice" type="xs:token" minOccurs="0"/>
+                        <xs:element name="mixPorts" type="mixPorts" minOccurs="0"/>
+                        <xs:element name="devicePorts" type="devicePorts" minOccurs="0"/>
+                        <xs:element name="routes" type="routes" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="name" type="xs:string" use="required"/>
+                    <xs:attribute name="halVersion" type="halVersion" use="required"/>
+                </xs:complexType>
+                <xs:unique name="mixPortNameUniqueness">
+                    <xs:selector xpath="mixPorts/mixPort"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+                <xs:key name="devicePortNameKey">
+                    <xs:selector xpath="devicePorts/devicePort"/>
+                    <xs:field xpath="@tagName"/>
+                </xs:key>
+                <xs:unique name="devicePortUniqueness">
+                    <xs:selector xpath="devicePorts/devicePort"/>
+                    <xs:field xpath="@type"/>
+                    <xs:field xpath="@address"/>
+                </xs:unique>
+                <xs:keyref name="defaultOutputDeviceRef" refer="devicePortNameKey">
+                    <xs:selector xpath="defaultOutputDevice"/>
+                    <xs:field xpath="."/>
+                </xs:keyref>
+                <xs:keyref name="attachedDeviceRef" refer="devicePortNameKey">
+                    <xs:selector xpath="attachedDevices/item"/>
+                    <xs:field xpath="."/>
+                </xs:keyref>
+                <!-- The following 3 constraints try to make sure each sink port
+                     is reference in one an only one route. -->
+                <xs:key name="routeSinkKey">
+                    <!-- predicate [@type='sink'] does not work in xsd 1.0 -->
+                    <xs:selector xpath="devicePorts/devicePort|mixPorts/mixPort"/>
+                    <xs:field xpath="@tagName|@name"/>
+                </xs:key>
+                <xs:keyref name="routeSinkRef" refer="routeSinkKey">
+                    <xs:selector xpath="routes/route"/>
+                    <xs:field xpath="@sink"/>
+                </xs:keyref>
+                <xs:unique name="routeUniqueness">
+                    <xs:selector xpath="routes/route"/>
+                    <xs:field xpath="@sink"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="attachedDevices">
+        <xs:sequence>
+            <xs:element name="item" type="xs:token" minOccurs="0" maxOccurs="unbounded"/>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="audioInOutFlags">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                "|" separated list of audio_output_flags_t or audio_input_flags_t.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="|[_A-Z]+(\|[_A-Z]+)*"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="role">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="sink"/>
+            <xs:enumeration value="source"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="mixPorts">
+        <xs:sequence>
+            <xs:element name="mixPort" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="profile" type="profile" minOccurs="0" maxOccurs="unbounded"/>
+                        <xs:element name="gains" type="gains" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="name" type="xs:token" use="required"/>
+                    <xs:attribute name="role" type="role" use="required"/>
+                    <xs:attribute name="flags" type="audioInOutFlags"/>
+                    <xs:attribute name="maxOpenCount" type="xs:unsignedInt"/>
+                    <xs:attribute name="maxActiveCount" type="xs:unsignedInt"/>
+                    <xs:attribute name="preferredUsage" type="audioUsageList">
+                        <xs:annotation>
+                            <xs:documentation xml:lang="en">
+                                When choosing the mixPort of an audio track, the audioPolicy
+                                first considers the mixPorts with a preferredUsage including
+                                the track AudioUsage preferred .
+                                If non support the track format, the other mixPorts are considered.
+                                Eg: a <mixPort preferredUsage="AUDIO_USAGE_MEDIA" /> will receive
+                                    the audio of all apps playing with a MEDIA usage.
+                                    It may receive audio from ALARM if there are no audio compatible
+                                    <mixPort preferredUsage="AUDIO_USAGE_ALARM" />.
+                             </xs:documentation>
+                        </xs:annotation>
+                    </xs:attribute>
+                </xs:complexType>
+                <xs:unique name="mixPortProfileUniqueness">
+                    <xs:selector xpath="profile"/>
+                    <xs:field xpath="format"/>
+                    <xs:field xpath="samplingRate"/>
+                    <xs:field xpath="channelMasks"/>
+                </xs:unique>
+                <xs:unique name="mixPortGainUniqueness">
+                    <xs:selector xpath="gains/gain"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="audioDevice">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_DEVICE_NONE"/>
+
+            <xs:enumeration value="AUDIO_DEVICE_OUT_EARPIECE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADPHONE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_DIGITAL"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_ACCESSORY"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_DEVICE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_TELEPHONY_TX"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI_ARC"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPDIF"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_FM"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER_SAFE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_IP"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BUS"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_PROXY"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HEARING_AID"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_ECHO_CANCELLER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_DEFAULT"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_STUB"/>
+
+            <xs:enumeration value="AUDIO_DEVICE_IN_COMMUNICATION"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_AMBIENT"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BUILTIN_MIC"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_WIRED_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_AUX_DIGITAL"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_TELEPHONY_RX"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BACK_MIC"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_ACCESSORY"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_DEVICE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_FM_TUNER"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_TV_TUNER"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_SPDIF"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_A2DP"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_LOOPBACK"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_IP"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BUS"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_PROXY"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_BLE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_HDMI_ARC"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_ECHO_REFERENCE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_DEFAULT"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_STUB"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="vendorExtension">
+        <!-- Vendor extension names must be prefixed by "VX_" to distinguish them from AOSP values.
+             Vendor are encouraged to namespace their module names to avoid conflicts.
+             Example for an hypothetical Google virtual reality device:
+                <devicePort tagName="VR" type="VX_GOOGLE_VR" role="sink">
+        -->
+        <xs:restriction base="xs:string">
+            <xs:pattern value="VX_[_a-zA-Z0-9]+"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="extendableAudioDevice">
+        <xs:union memberTypes="audioDevice vendorExtension"/>
+    </xs:simpleType>
+    <xs:simpleType name="audioFormat">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_FORMAT_DEFAULT" />
+            <xs:enumeration value="AUDIO_FORMAT_PCM_16_BIT" />
+            <xs:enumeration value="AUDIO_FORMAT_PCM_8_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_32_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_8_24_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_FLOAT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_24_BIT_PACKED"/>
+            <xs:enumeration value="AUDIO_FORMAT_MP3"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_NB"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_WB"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_MAIN"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_SSR"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LTP"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_SCALABLE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ERLC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ELD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_MAIN"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SSR"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LTP"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SCALABLE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ERLC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ELD"/>
+            <xs:enumeration value="AUDIO_FORMAT_VORBIS"/>
+            <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_OPUS"/>
+            <xs:enumeration value="AUDIO_FORMAT_AC3"/>
+            <xs:enumeration value="AUDIO_FORMAT_E_AC3"/>
+            <xs:enumeration value="AUDIO_FORMAT_DTS"/>
+            <xs:enumeration value="AUDIO_FORMAT_DTS_HD"/>
+            <xs:enumeration value="AUDIO_FORMAT_IEC61937"/>
+            <xs:enumeration value="AUDIO_FORMAT_DOLBY_TRUEHD"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRC"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCB"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCWB"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCNW"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADIF"/>
+            <xs:enumeration value="AUDIO_FORMAT_WMA"/>
+            <xs:enumeration value="AUDIO_FORMAT_WMA_PRO"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_WB_PLUS"/>
+            <xs:enumeration value="AUDIO_FORMAT_MP2"/>
+            <xs:enumeration value="AUDIO_FORMAT_QCELP"/>
+            <xs:enumeration value="AUDIO_FORMAT_DSD"/>
+            <xs:enumeration value="AUDIO_FORMAT_FLAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_ALAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_APE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS"/>
+            <xs:enumeration value="AUDIO_FORMAT_SBC"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX_HD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AC4"/>
+            <xs:enumeration value="AUDIO_FORMAT_LDAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_E_AC3_JOC"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_1_0"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_2_0"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_2_1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_XHE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_XHE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LATM"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LATM_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LATM_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LATM_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_CELT"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX_ADAPTIVE"/>
+            <xs:enumeration value="AUDIO_FORMAT_LHDC"/>
+            <xs:enumeration value="AUDIO_FORMAT_LHDC_LL"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX_TWSP"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="extendableAudioFormat">
+        <xs:union memberTypes="audioFormat vendorExtension"/>
+    </xs:simpleType>
+    <xs:simpleType name="audioUsage">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Audio usage specifies the intended use case for the sound being played.
+                Please consult frameworks/base/media/java/android/media/AudioAttributes.java
+                for the description of each value.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_USAGE_UNKNOWN" />
+            <xs:enumeration value="AUDIO_USAGE_MEDIA" />
+            <xs:enumeration value="AUDIO_USAGE_VOICE_COMMUNICATION" />
+            <xs:enumeration value="AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING" />
+            <xs:enumeration value="AUDIO_USAGE_ALARM" />
+            <xs:enumeration value="AUDIO_USAGE_NOTIFICATION" />
+            <xs:enumeration value="AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_SONIFICATION" />
+            <xs:enumeration value="AUDIO_USAGE_GAME" />
+            <xs:enumeration value="AUDIO_USAGE_VIRTUAL_SOURCE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANT" />
+            <xs:enumeration value="AUDIO_USAGE_CALL_ASSISTANT" />
+            <xs:enumeration value="AUDIO_USAGE_EMERGENCY" />
+            <xs:enumeration value="AUDIO_USAGE_SAFETY" />
+            <xs:enumeration value="AUDIO_USAGE_VEHICLE_STATUS" />
+            <xs:enumeration value="AUDIO_USAGE_ANNOUNCEMENT" />
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="audioUsageList">
+        <xs:list itemType="audioUsage"/>
+    </xs:simpleType>
+    <xs:simpleType name="audioContentType">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Audio content type expresses the general category of the content.
+                Please consult frameworks/base/media/java/android/media/AudioAttributes.java
+                for the description of each value.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_UNKNOWN"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_SPEECH"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_MUSIC"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_MOVIE"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_SONIFICATION"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="samplingRates">
+        <xs:list itemType="xs:nonNegativeInteger" />
+    </xs:simpleType>
+    <xs:simpleType name="audioChannelMask">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Audio channel mask specifies presence of particular channels.
+                There are two representations:
+                - representation position (traditional discrete channel specification,
+                  e.g. "left", "right");
+                - indexed (this is similar to "tracks" in audio mixing, channels
+                  are represented using numbers).
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_STEREO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_2POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_2POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_2POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_3POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_3POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_QUAD"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_QUAD_BACK"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_QUAD_SIDE"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_SURROUND"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_PENTA"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1_BACK"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1_SIDE"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_5POINT1POINT4"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_6POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_7POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_7POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_7POINT1POINT4"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_MONO_HAPTIC_A"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_STEREO_HAPTIC_A"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_HAPTIC_AB"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_MONO_HAPTIC_AB"/>
+            <xs:enumeration value="AUDIO_CHANNEL_OUT_STEREO_HAPTIC_AB"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_STEREO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_FRONT_BACK"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_6"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_2POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_2POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_3POINT0POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_3POINT1POINT2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_5POINT1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_VOICE_UPLINK_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_VOICE_DNLINK_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_IN_VOICE_CALL_MONO"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_1"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_2"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_3"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_4"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_5"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_6"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_7"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_8"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_9"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_10"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_11"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_12"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_13"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_14"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_15"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_16"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_17"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_18"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_19"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_20"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_21"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_22"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_23"/>
+            <xs:enumeration value="AUDIO_CHANNEL_INDEX_MASK_24"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="channelMasks">
+        <xs:list itemType="audioChannelMask" />
+    </xs:simpleType>
+    <xs:complexType name="profile">
+        <xs:attribute name="name" type="xs:token" use="optional"/>
+        <xs:attribute name="format" type="extendableAudioFormat" use="optional"/>
+        <xs:attribute name="samplingRates" type="samplingRates" use="optional"/>
+        <xs:attribute name="channelMasks" type="channelMasks" use="optional"/>
+    </xs:complexType>
+    <xs:simpleType name="gainMode">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_GAIN_MODE_JOINT"/>
+            <xs:enumeration value="AUDIO_GAIN_MODE_CHANNELS"/>
+            <xs:enumeration value="AUDIO_GAIN_MODE_RAMP"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="gains">
+        <xs:sequence>
+            <xs:element name="gain" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:attribute name="name" type="xs:token" use="required"/>
+                    <xs:attribute name="mode" type="gainMode" use="required"/>
+                    <xs:attribute name="channel_mask" type="audioChannelMask" use="optional"/>
+                    <xs:attribute name="minValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="maxValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="defaultValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="stepValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="minRampMs" type="xs:int" use="optional"/>
+                    <xs:attribute name="maxRampMs" type="xs:int" use="optional"/>
+                    <xs:attribute name="useForVolume" type="xs:boolean" use="optional"/>
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="devicePorts">
+        <xs:sequence>
+            <xs:element name="devicePort" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="profile" type="profile" minOccurs="0" maxOccurs="unbounded"/>
+                        <xs:element name="gains" type="gains" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="tagName" type="xs:token" use="required"/>
+                    <xs:attribute name="type" type="extendableAudioDevice" use="required"/>
+                    <xs:attribute name="role" type="role" use="required"/>
+                    <xs:attribute name="address" type="xs:string" use="optional" default=""/>
+                    <!-- Note that XSD 1.0 can not check that a type only has one default. -->
+                    <xs:attribute name="default" type="xs:boolean" use="optional">
+                        <xs:annotation>
+                            <xs:documentation xml:lang="en">
+                                The default device will be used if multiple have the same type
+                                and no explicit route request exists for a specific device of
+                                that type.
+                            </xs:documentation>
+                        </xs:annotation>
+                    </xs:attribute>
+                    <xs:attribute name="encodedFormats" type="audioFormatsList" use="optional"
+                                  default="" />
+                </xs:complexType>
+                <xs:unique name="devicePortProfileUniqueness">
+                    <xs:selector xpath="profile"/>
+                    <xs:field xpath="format"/>
+                    <xs:field xpath="samplingRate"/>
+                    <xs:field xpath="channelMasks"/>
+                </xs:unique>
+                <xs:unique name="devicePortGainUniqueness">
+                    <xs:selector xpath="gains/gain"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="mixType">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="mix"/>
+            <xs:enumeration value="mux"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="routes">
+        <xs:sequence>
+            <xs:element name="route" minOccurs="0" maxOccurs="unbounded">
+                <xs:annotation>
+                    <xs:documentation xml:lang="en">
+                        List all available sources for a given sink.
+                    </xs:documentation>
+                </xs:annotation>
+                <xs:complexType>
+                    <xs:attribute name="type" type="mixType" use="required"/>
+                    <xs:attribute name="sink" type="xs:string" use="required"/>
+                    <xs:attribute name="sources" type="xs:string" use="required"/>
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="volumes">
+        <xs:sequence>
+            <xs:element name="volume" type="volume" minOccurs="0" maxOccurs="unbounded"/>
+            <xs:element name="reference" type="reference" minOccurs="0" maxOccurs="unbounded">
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <!-- TODO: Always require a ref for better xsd validations.
+               Currently a volume could have no points nor ref
+               as it can not be forbidden by xsd 1.0.-->
+    <xs:simpleType name="volumePoint">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Comma separated pair of number.
+                The fist one is the framework level (between 0 and 100).
+                The second one is the volume to send to the HAL.
+                The framework will interpolate volumes not specified.
+                Their MUST be at least 2 points specified.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="([0-9]{1,2}|100),-?[0-9]+"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="audioStreamType">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Audio stream type describing the intended use case of a stream.
+                Please consult frameworks/base/media/java/android/media/AudioSystem.java
+                for the description of each value.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_STREAM_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_STREAM_SYSTEM"/>
+            <xs:enumeration value="AUDIO_STREAM_RING"/>
+            <xs:enumeration value="AUDIO_STREAM_MUSIC"/>
+            <xs:enumeration value="AUDIO_STREAM_ALARM"/>
+            <xs:enumeration value="AUDIO_STREAM_NOTIFICATION"/>
+            <xs:enumeration value="AUDIO_STREAM_BLUETOOTH_SCO"/>
+            <xs:enumeration value="AUDIO_STREAM_ENFORCED_AUDIBLE"/>
+            <xs:enumeration value="AUDIO_STREAM_DTMF"/>
+            <xs:enumeration value="AUDIO_STREAM_TTS"/>
+            <xs:enumeration value="AUDIO_STREAM_ACCESSIBILITY"/>
+            <xs:enumeration value="AUDIO_STREAM_ASSISTANT"/>
+            <xs:enumeration value="AUDIO_STREAM_REROUTING"/>
+            <xs:enumeration value="AUDIO_STREAM_PATCH"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="audioSource">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                An audio source defines the intended use case for the sound being recorded.
+                Please consult frameworks/base/media/java/android/media/MediaRecorder.java
+                for the description of each value.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_SOURCE_DEFAULT"/>
+            <xs:enumeration value="AUDIO_SOURCE_MIC"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_UPLINK"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_DOWNLINK"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_SOURCE_CAMCORDER"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_RECOGNITION"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_COMMUNICATION"/>
+            <xs:enumeration value="AUDIO_SOURCE_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_SOURCE_UNPROCESSED"/>
+            <xs:enumeration value="AUDIO_SOURCE_VOICE_PERFORMANCE"/>
+            <xs:enumeration value="AUDIO_SOURCE_ECHO_REFERENCE"/>
+            <xs:enumeration value="AUDIO_SOURCE_FM_TUNER"/>
+            <xs:enumeration value="AUDIO_SOURCE_HOTWORD"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of device_category from Volume.h. -->
+    <xs:simpleType name="deviceCategory">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="DEVICE_CATEGORY_HEADSET"/>
+            <xs:enumeration value="DEVICE_CATEGORY_SPEAKER"/>
+            <xs:enumeration value="DEVICE_CATEGORY_EARPIECE"/>
+            <xs:enumeration value="DEVICE_CATEGORY_EXT_MEDIA"/>
+            <xs:enumeration value="DEVICE_CATEGORY_HEARING_AID"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="volume">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Volume section defines a volume curve for a given use case and device category.
+                It contains a list of points of this curve expressing the attenuation in Millibels
+                for a given volume index from 0 to 100.
+                <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_SPEAKER">
+                    <point>0,-9600</point>
+                    <point>100,0</point>
+                </volume>
+
+                It may also reference a reference/@name to avoid duplicating curves.
+                <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_SPEAKER"
+                        ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
+                <reference name="DEFAULT_MEDIA_VOLUME_CURVE">
+                    <point>0,-9600</point>
+                    <point>100,0</point>
+                </reference>
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="point" type="volumePoint" minOccurs="0" maxOccurs="unbounded"/>
+        </xs:sequence>
+        <xs:attribute name="stream" type="audioStreamType"/>
+        <xs:attribute name="deviceCategory" type="deviceCategory"/>
+        <xs:attribute name="ref" type="xs:token" use="optional"/>
+    </xs:complexType>
+    <xs:complexType name="reference">
+        <xs:sequence>
+            <xs:element name="point" type="volumePoint" minOccurs="2" maxOccurs="unbounded"/>
+        </xs:sequence>
+        <xs:attribute name="name" type="xs:token" use="required"/>
+    </xs:complexType>
+    <xs:complexType name="surroundSound">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Surround Sound section provides configuration related to handling of
+                multi-channel formats.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="formats" type="surroundFormats"/>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="audioFormatsList">
+        <xs:list itemType="audioFormat" />
+    </xs:simpleType>
+    <xs:complexType name="surroundFormats">
+        <xs:sequence>
+            <xs:element name="format" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:attribute name="name" type="audioFormat" use="required"/>
+                    <xs:attribute name="subformats" type="audioFormatsList" />
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="engineSuffix">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="default"/>
+            <xs:enumeration value="configurable"/>
+        </xs:restriction>
+    </xs:simpleType>
+</xs:schema>
diff --git a/audio/7.0/config/update_audio_policy_config.sh b/audio/7.0/config/update_audio_policy_config.sh
new file mode 100755
index 0000000..8714b5f
--- /dev/null
+++ b/audio/7.0/config/update_audio_policy_config.sh
@@ -0,0 +1,159 @@
+#!/bin/bash
+
+# Copyright (C) 2020 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script is used to update audio policy configuration files
+# to comply with the updated audio_policy_configuration.xsd from V7.0.
+#
+# The main difference is the separator used in lists for attributes.
+# Since the XML Schema Definition standard only allows space to be
+# used as a separator (see https://www.w3.org/TR/xmlschema11-2/#list-datatypes)
+# the previous versions used a regular expression to validate lists
+# in attribute values. E.g. the channel masks were validated using
+# the following regexp: [_A-Z][_A-Z0-9]*(,[_A-Z][_A-Z0-9]*)*
+# This has an obvious drawback of missing typos in the config file.
+#
+# The V7.0 has shifted to defining most of the frequently changed
+# types in the XSD schema only. This allows for verifying all the values
+# in lists, but in order to comply with XML Schema requirements
+# list elements must be separated by space.
+#
+# Since the APM config files typically use include directives,
+# the script must be pointed to the main APM config file and will
+# take care all the included files automatically.
+# If the included file is a shared version from 'frameworks/av',
+# instead of updating it the script checks if there is a newer
+# version with the corresponding name suffix (e.g.
+# 'a2dp_audio_policy_configuration_7_0.xml') and updates the include
+# path instead.
+
+set -euo pipefail
+
+if (echo "$@" | grep -qe -h); then
+    echo "This script will update Audio Policy Manager config file"
+    echo "to the format required by V7.0 XSD schema from a previous"
+    echo "version."
+    echo
+    echo "USAGE: $0 [APM_XML_FILE] [OLD_VERSION]"
+    echo "       APM_XML_FILE specifies the path to audio_policy_configuration.xml"
+    echo "                    relative to Android repository root"
+    echo "       OLD_VERSION specifies the version of schema currently used"
+    echo
+    echo "Example: $0 device/generic/goldfish/audio/policy/audio_policy_configuration.xml 6.0"
+    exit
+fi
+readonly HAL_DIRECTORY=hardware/interfaces/audio
+readonly SHARED_CONFIGS_DIRECTORY=frameworks/av/services/audiopolicy/config
+readonly OLD_VERSION=${2:-$(ls ${ANDROID_BUILD_TOP}/${HAL_DIRECTORY} | grep -E '[0-9]+\.[0-9]+' |
+                                sort -n | tail -n1)}
+readonly NEW_VERSION=7.0
+readonly NEW_VERSION_UNDERSCORE=7_0
+
+readonly SOURCE_CONFIG=${ANDROID_BUILD_TOP}/$1
+
+# First, validate the input using the schema of the current version
+
+echo Validating the source against the $OLD_VERSION schema
+xmllint --noout --xinclude \
+        --nofixup-base-uris --path "$ANDROID_BUILD_TOP/$SHARED_CONFIGS_DIRECTORY" \
+        --schema ${ANDROID_BUILD_TOP}/${HAL_DIRECTORY}/${OLD_VERSION}/config/audio_policy_configuration.xsd \
+        ${SOURCE_CONFIG}
+if [ $? -ne 0 ]; then
+    echo
+    echo "Config file fails validation for the specified version $OLD_VERSION--unsafe to update"
+    exit 1
+fi
+
+# Find all the source files recursively
+
+SOURCE_FILES=${SOURCE_CONFIG}
+SHARED_FILES=
+findIncludes() {
+    local FILES_TO_CHECK=
+    for F in $1; do
+        local FOUND_INCLUDES=$(grep -Po '<xi:include href="\K[^"]+(?="\/>)' ${F})
+        for I in ${FOUND_INCLUDES}; do
+            SOURCE_FULL_PATH=$(dirname ${F})/${I}
+            SHARED_FULL_PATH=${ANDROID_BUILD_TOP}/${SHARED_CONFIGS_DIRECTORY}/${I}
+            if [ -f "$SOURCE_FULL_PATH" ]; then
+                # Device-specific file.
+                SOURCE_FILES+=$'\n'${SOURCE_FULL_PATH}
+                FILES_TO_CHECK+=$'\n'${SOURCE_FULL_PATH}
+            elif [ -f "$SHARED_FULL_PATH" ]; then
+                # Shared file from the frameworks repo.
+                SHARED_FILES+=$'\n'${I}
+                FILES_TO_CHECK+=$'\n'${SHARED_FULL_PATH}
+            else
+                echo
+                echo "Include file not found: $I"
+                exit 1
+            fi
+        done
+    done
+    if [ "$FILES_TO_CHECK" ]; then
+        findIncludes "$FILES_TO_CHECK"
+    fi
+}
+findIncludes ${SOURCE_FILES}
+
+echo "Will update $1 and included device-specific files in place."
+echo "Will update paths to shared included files."
+echo "Press Ctrl-C to cancel, Enter to continue"
+read
+
+updateFile() {
+    FILE=$1
+    ATTR=$2
+    SEPARATOR=$3
+    SRC_LINES=$(grep -nPo "$ATTR=\"[^\"]+\"" ${FILE} || true)
+    for S in $SRC_LINES; do
+        # Prepare instruction for 'sed' for in-place editing of specified line
+        R=$(echo ${S} | sed -e 's/^[0-9]\+:/\//' | sed -e "s/$SEPARATOR/ /g")
+        S=$(echo ${S} | sed -e 's/:/s\//')${R}/
+        echo ${S} | sed -i -f - ${FILE}
+    done
+}
+for F in $SOURCE_FILES; do
+    updateFile ${F} "channelMasks" ","
+    updateFile ${F} "samplingRates" ","
+done;
+
+updateIncludes() {
+    FILE=$1
+    for I in $SHARED_FILES; do
+        NEW_VERSION_I=${I%.*}_${NEW_VERSION_UNDERSCORE}.${I##*.}
+        if [ -e "$ANDROID_BUILD_TOP/$SHARED_CONFIGS_DIRECTORY/$NEW_VERSION_I" ]; then
+            echo "s/$I/$NEW_VERSION_I/g" | sed -i -f - ${FILE}
+        fi
+    done
+}
+for F in $SOURCE_FILES; do
+    updateIncludes ${F}
+done
+
+# Validate the results against the new schema
+
+echo Validating the result against the $NEW_VERSION schema
+xmllint --noout --xinclude \
+        --nofixup-base-uris --path "$ANDROID_BUILD_TOP/$SHARED_CONFIGS_DIRECTORY" \
+        --schema ${ANDROID_BUILD_TOP}/${HAL_DIRECTORY}/${NEW_VERSION}/config/audio_policy_configuration.xsd \
+        ${SOURCE_CONFIG}
+if [ $? -ne 0 ]; then
+    echo
+    echo "Config file fails validation for the specified version $NEW_VERSION--please check the changes"
+    exit 1
+fi
+echo
+echo "Please check the diff and update path to APM shared files in the device makefile!"
diff --git a/audio/7.0/types.hal b/audio/7.0/types.hal
new file mode 100644
index 0000000..15ca492
--- /dev/null
+++ b/audio/7.0/types.hal
@@ -0,0 +1,412 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@7.0;
+
+import android.hardware.audio.common@7.0;
+
+enum Result : int32_t {
+    OK,
+    NOT_INITIALIZED,
+    INVALID_ARGUMENTS,
+    INVALID_STATE,
+    /**
+     * Methods marked as "Optional method" must return this result value
+     * if the operation is not supported by HAL.
+     */
+    NOT_SUPPORTED
+};
+
+@export(name="audio_drain_type_t", value_prefix="AUDIO_DRAIN_")
+enum AudioDrain : int32_t {
+    /** drain() returns when all data has been played. */
+    ALL,
+    /**
+     * drain() returns a short time before all data from the current track has
+     * been played to give time for gapless track switch.
+     */
+    EARLY_NOTIFY
+};
+
+/**
+ * A substitute for POSIX timespec.
+ */
+struct TimeSpec {
+    uint64_t tvSec;   // seconds
+    uint64_t tvNSec;  // nanoseconds
+};
+
+struct ParameterValue {
+    string key;
+    string value;
+};
+
+enum MmapBufferFlag : uint32_t {
+    NONE    = 0x0,
+    /**
+     * If the buffer can be securely shared to untrusted applications
+     * through the AAudio exclusive mode.
+     * Only set this flag if applications are restricted from accessing the
+     * memory surrounding the audio data buffer by a kernel mechanism.
+     * See Linux kernel's dma_buf.
+     */
+    APPLICATION_SHAREABLE    = 0x1,
+};
+
+/**
+ * Mmap buffer descriptor returned by IStream.createMmapBuffer().
+ * Used by streams opened in mmap mode.
+ */
+struct MmapBufferInfo {
+    /** Mmap memory buffer */
+    memory  sharedMemory;
+    /** Total buffer size in frames */
+    uint32_t bufferSizeFrames;
+    /** Transfer size granularity in frames */
+    uint32_t burstSizeFrames;
+    /** Attributes describing the buffer. */
+    bitfield<MmapBufferFlag> flags;
+};
+
+/**
+ * Mmap buffer read/write position returned by IStream.getMmapPosition().
+ * Used by streams opened in mmap mode.
+ */
+struct MmapPosition {
+    int64_t  timeNanoseconds; // time stamp in ns, CLOCK_MONOTONIC
+    int32_t  positionFrames;  // increasing 32 bit frame count reset when IStream.stop() is called
+};
+
+/**
+ * The message queue flags used to synchronize reads and writes from
+ * message queues used by StreamIn and StreamOut.
+ */
+enum MessageQueueFlagBits : uint32_t {
+    NOT_EMPTY = 1 << 0,
+    NOT_FULL = 1 << 1
+};
+
+/*
+ * Microphone information
+ *
+ */
+
+/**
+ * A 3D point used to represent position or orientation of a microphone.
+ *
+ * Position: Coordinates of the microphone's capsule, in meters, from the
+ * bottom-left-back corner of the bounding box of android device in natural
+ * orientation (PORTRAIT for phones, LANDSCAPE for tablets, tvs, etc).
+ * The orientation musth match the reported by the api Display.getRotation().
+ *
+ * Orientation: Normalized vector to signal the main orientation of the
+ * microphone's capsule. Magnitude = sqrt(x^2 + y^2 + z^2) = 1
+ */
+struct AudioMicrophoneCoordinate {
+    float x;
+    float y;
+    float z;
+};
+
+/**
+ * Enum to identify the type of channel mapping for active microphones.
+ * Used channels further identify if the microphone has any significative
+ * process (e.g. High Pass Filtering, dynamic compression)
+ * Simple processing as constant gain adjustment must be DIRECT.
+ */
+enum AudioMicrophoneChannelMapping : uint32_t {
+    UNUSED      = 0, /* Channel not used */
+    DIRECT      = 1, /* Channel used and signal not processed */
+    PROCESSED   = 2, /* Channel used and signal has some process */
+};
+
+/**
+ * Enum to identify locations of microphones in regards to the body of the
+ * android device.
+ */
+enum AudioMicrophoneLocation : uint32_t {
+    UNKNOWN             = 0,
+    MAINBODY            = 1,
+    MAINBODY_MOVABLE    = 2,
+    PERIPHERAL          = 3,
+};
+
+/**
+ * Identifier to help group related microphones together
+ * e.g. microphone arrays should belong to the same group
+ */
+typedef int32_t AudioMicrophoneGroup;
+
+/**
+ * Enum with standard polar patterns of microphones
+ */
+enum AudioMicrophoneDirectionality : uint32_t {
+    UNKNOWN         = 0,
+    OMNI            = 1,
+    BI_DIRECTIONAL  = 2,
+    CARDIOID        = 3,
+    HYPER_CARDIOID  = 4,
+    SUPER_CARDIOID  = 5,
+};
+
+/**
+ * A (frequency, level) pair. Used to represent frequency response.
+ */
+struct AudioFrequencyResponsePoint {
+    /** In Hz */
+    float frequency;
+    /** In dB */
+    float level;
+};
+
+/**
+ * Structure used by the HAL to describe microphone's characteristics
+ * Used by StreamIn and Device
+ */
+struct MicrophoneInfo {
+    /** Unique alphanumeric id for microphone. Guaranteed to be the same
+     * even after rebooting.
+     */
+    string                                  deviceId;
+    /**
+     * Device specific information
+     */
+    DeviceAddress                           deviceAddress;
+    /** Each element of the vector must describe the channel with the same
+     *  index.
+     */
+    vec<AudioMicrophoneChannelMapping>      channelMapping;
+    /** Location of the microphone in regard to the body of the device */
+    AudioMicrophoneLocation                 location;
+    /** Identifier to help group related microphones together
+     *  e.g. microphone arrays should belong to the same group
+     */
+    AudioMicrophoneGroup                    group;
+    /** Index of this microphone within the group.
+     *  (group, index) must be unique within the same device.
+     */
+    uint32_t                                indexInTheGroup;
+    /** Level in dBFS produced by a 1000 Hz tone at 94 dB SPL */
+    float                                   sensitivity;
+    /** Level in dB of the max SPL supported at 1000 Hz */
+    float                                   maxSpl;
+    /** Level in dB of the min SPL supported at 1000 Hz */
+    float                                   minSpl;
+    /** Standard polar pattern of the microphone */
+    AudioMicrophoneDirectionality           directionality;
+    /** Vector with ordered frequency responses (from low to high frequencies)
+     *  with the frequency response of the microphone.
+     *  Levels are in dB, relative to level at 1000 Hz
+     */
+    vec<AudioFrequencyResponsePoint>        frequencyResponse;
+    /** Position of the microphone's capsule in meters, from the
+     *  bottom-left-back corner of the bounding box of device.
+     */
+    AudioMicrophoneCoordinate               position;
+    /** Normalized point to signal the main orientation of the microphone's
+     *  capsule. sqrt(x^2 + y^2 + z^2) = 1
+     */
+    AudioMicrophoneCoordinate               orientation;
+};
+
+/**
+ * Constants used by the HAL to determine how to select microphones and process those inputs in
+ * order to optimize for capture in the specified direction.
+ *
+ * MicrophoneDirection Constants are defined in MicrophoneDirection.java.
+ */
+@export(name="audio_microphone_direction_t", value_prefix="MIC_DIRECTION_")
+enum MicrophoneDirection : int32_t {
+    /**
+     * Don't do any directionality processing of the activated microphone(s).
+     */
+    UNSPECIFIED = 0,
+    /**
+     * Optimize capture for audio coming from the screen-side of the device.
+     */
+    FRONT = 1,
+    /**
+     * Optimize capture for audio coming from the side of the device opposite the screen.
+     */
+    BACK = 2,
+    /**
+     * Optimize capture for audio coming from an off-device microphone.
+     */
+    EXTERNAL = 3,
+};
+
+
+/* Dual Mono handling is used when a stereo audio stream
+ * contains separate audio content on the left and right channels.
+ * Such information about the content of the stream may be found, for example,
+ * in ITU T-REC-J.94-201610 A.6.2.3 Component descriptor.
+ */
+@export(name="audio_dual_mono_mode_t", value_prefix="AUDIO_DUAL_MONO_MODE_")
+enum DualMonoMode : int32_t {
+    // Need to be in sync with DUAL_MONO_MODE* constants in
+    // frameworks/base/media/java/android/media/AudioTrack.java
+    /**
+     * Disable any Dual Mono presentation effect.
+     *
+     */
+    OFF = 0,
+    /**
+     * This mode indicates that a stereo stream should be presented
+     * with the left and right audio channels blended together
+     * and delivered to both channels.
+     *
+     * Behavior for non-stereo streams is implementation defined.
+     * A suggested guideline is that the left-right stereo symmetric
+     * channels are pairwise blended, the other channels such as center
+     * are left alone.
+     */
+    LR = 1,
+    /**
+     * This mode indicates that a stereo stream should be presented
+     * with the left audio channel replicated into the right audio channel.
+     *
+     * Behavior for non-stereo streams is implementation defined.
+     * A suggested guideline is that all channels with left-right
+     * stereo symmetry will have the left channel position replicated
+     * into the right channel position. The center channels (with no
+     * left/right symmetry) or unbalanced channels are left alone.
+     */
+    LL = 2,
+    /**
+     * This mode indicates that a stereo stream should be presented
+     * with the right audio channel replicated into the left audio channel.
+     *
+     * Behavior for non-stereo streams is implementation defined.
+     * A suggested guideline is that all channels with left-right
+     * stereo symmetry will have the right channel position replicated
+     * into the left channel position. The center channels (with no
+     * left/right symmetry) or unbalanced channels are left alone.
+     */
+    RR = 3,
+};
+
+/**
+ * Algorithms used for timestretching (preserving pitch while playing audio
+ * content at different speed).
+ */
+@export(name="audio_timestretch_stretch_mode_t", value_prefix="AUDIO_TIMESTRETCH_STRETCH_")
+enum TimestretchMode : int32_t {
+    // Need to be in sync with AUDIO_STRETCH_MODE_* constants in
+    // frameworks/base/media/java/android/media/PlaybackParams.java
+    DEFAULT = 0,
+    /** Selects timestretch algorithm best suitable for voice (speech) content. */
+    VOICE = 1,
+};
+
+/**
+ * Behavior when the values for speed and / or pitch are out
+ * of applicable range.
+ */
+@export(name="audio_timestretch_fallback_mode_t", value_prefix="AUDIO_TIMESTRETCH_FALLBACK_")
+enum TimestretchFallbackMode : int32_t {
+    // Need to be in sync with AUDIO_FALLBACK_MODE_* constants in
+    // frameworks/base/media/java/android/media/PlaybackParams.java
+    /** Play silence for parameter values that are out of range. */
+    MUTE = 1,
+    /** Return an error while trying to set the parameters. */
+    FAIL = 2,
+};
+
+/**
+ * Parameters determining playback behavior. They are used to speed up or
+ * slow down playback and / or change the tonal frequency of the audio content
+ * (pitch).
+ */
+struct PlaybackRate {
+    /**
+     * Speed factor (multiplier). Normal speed has the value of 1.0f.
+     * Values less than 1.0f slow down playback, value greater than 1.0f
+     * speed it up.
+     */
+    float speed;
+    /**
+     * Pitch factor (multiplier). Setting pitch value to 1.0f together
+     * with changing playback speed preserves the pitch, this is often
+     * called "timestretching." Setting the pitch value equal to speed produces
+     * the same effect as playing audio content at different sampling rate.
+     */
+    float pitch;
+    /**
+     * Selects the algorithm used for timestretching (preserving pitch while
+     * playing audio at different speed).
+     */
+    TimestretchMode timestretchMode;
+    /**
+     * Selects the behavior when the specified values for speed and / or pitch
+     * are out of applicable range.
+     */
+    TimestretchFallbackMode fallbackMode;
+};
+
+/**
+ * The audio output flags serve two purposes:
+ *
+ *  - when an output stream is created they indicate its attributes;
+ *
+ *  - when present in an output profile descriptor listed for a particular audio
+ *    hardware module, they indicate that an output stream can be opened that
+ *    supports the attributes indicated by the flags.
+ */
+@export(name="audio_output_flags_t", value_prefix="AUDIO_OUTPUT_FLAG_")
+enum AudioOutputFlag : int32_t {
+    NONE    = 0x0, // no attributes
+    DIRECT  = 0x1, // this output directly connects a track
+                   // to one output stream: no software mixer
+    PRIMARY = 0x2, // this output is the primary output of the device. It is
+                   // unique and must be present. It is opened by default and
+                   // receives routing, audio mode and volume controls related
+                   // to voice calls.
+    FAST    = 0x4,    // output supports "fast tracks", defined elsewhere
+    DEEP_BUFFER      = 0x8,   // use deep audio buffers
+    COMPRESS_OFFLOAD = 0x10,  // offload playback of compressed streams to
+                              // hardware codec
+    NON_BLOCKING     = 0x20,  // use non-blocking write
+    HW_AV_SYNC = 0x40,   // output uses a hardware A/V sync
+    TTS        = 0x80,   // output for streams transmitted through speaker at a
+                         // sample rate high enough to accommodate lower-range
+                         // ultrasonic p/b
+    RAW        = 0x100,  // minimize signal processing
+    SYNC       = 0x200,  // synchronize I/O streams
+    IEC958_NONAUDIO = 0x400, // Audio stream contains compressed audio in SPDIF
+                             // data bursts, not PCM.
+    DIRECT_PCM = 0x2000,     // Audio stream containing PCM data that needs
+                             // to pass through compress path for DSP post proc.
+    MMAP_NOIRQ = 0x4000, // output operates in MMAP no IRQ mode.
+    VOIP_RX = 0x8000,    // preferred output for VoIP calls.
+    /** preferred output for call music */
+    INCALL_MUSIC = 0x10000,
+};
+
+/**
+ * The audio input flags are analogous to audio output flags.
+ */
+@export(name="audio_input_flags_t", value_prefix="AUDIO_INPUT_FLAG_")
+enum AudioInputFlag : int32_t {
+    NONE         = 0x0,  // no attributes
+    FAST         = 0x1,  // prefer an input that supports "fast tracks"
+    HW_HOTWORD   = 0x2,  // prefer an input that captures from hw hotword source
+    RAW          = 0x4,  // minimize signal processing
+    SYNC         = 0x8,  // synchronize I/O streams
+    MMAP_NOIRQ   = 0x10, // input operates in MMAP no IRQ mode.
+    VOIP_TX      = 0x20, // preferred input for VoIP calls.
+    HW_AV_SYNC   = 0x40, // input connected to an output that uses a hardware A/V sync
+    DIRECT       = 0x80, // for acquiring encoded streams
+};
diff --git a/audio/common/7.0/Android.bp b/audio/common/7.0/Android.bp
new file mode 100644
index 0000000..e24871c
--- /dev/null
+++ b/audio/common/7.0/Android.bp
@@ -0,0 +1,27 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.audio.common@7.0",
+    root: "android.hardware",
+    srcs: [
+        "types.hal",
+    ],
+    interfaces: [
+        "android.hidl.safe_union@1.0",
+    ],
+    gen_java: true,
+    gen_java_constants: true,
+}
+
+cc_library {
+    name: "android.hardware.audio.common@7.0-enums",
+    vendor_available: true,
+    generated_sources: ["audio_policy_configuration_V7_0"],
+    generated_headers: ["audio_policy_configuration_V7_0"],
+    header_libs: ["libxsdc-utils"],
+    shared_libs: [
+        "libbase",
+        "liblog",
+        "libxml2",
+    ],
+}
diff --git a/audio/common/7.0/types.hal b/audio/common/7.0/types.hal
new file mode 100644
index 0000000..94d0af7
--- /dev/null
+++ b/audio/common/7.0/types.hal
@@ -0,0 +1,419 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.common@7.0;
+
+import android.hidl.safe_union@1.0;
+
+/**
+ * Handle type for identifying audio resources. Handles are allocated by the framework.
+ */
+typedef int32_t AudioIoHandle;
+
+/**
+ * Each port has a unique ID or handle allocated by policy manager.
+ */
+typedef int32_t AudioPortHandle;
+
+/**
+ * Each patch is identified by a handle allocated by the HAL.
+ */
+typedef int32_t AudioPatchHandle;
+
+/**
+ * A HW synchronization source returned by the audio HAL.
+ */
+typedef uint32_t AudioHwSync;
+
+/**
+ * Commonly used structure for passing unique identifieds (UUID).
+ * For the definition of UUID, refer to ITU-T X.667 spec.
+ */
+struct Uuid {
+    uint32_t timeLow;
+    uint16_t timeMid;
+    uint16_t versionAndTimeHigh;
+    uint16_t variantAndClockSeqHigh;
+    uint8_t[6] node;
+};
+
+
+/*
+ *
+ *  Audio streams
+ *
+ */
+
+/**
+ * Audio stream type describing the intended use case of a stream.
+ * See 'audioStreamType' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioStreamType;
+
+/**
+ * An audio source defines the intended use case for the sound being recorded.
+ * See 'audioSource' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioSource;
+
+/**
+ * An audio session identifier is used to designate the particular
+ * playback or recording session (e.g. playback performed by a certain
+ * application).
+ */
+typedef int32_t AudioSession;
+
+enum AudioSessionConsts : int32_t {
+    /**
+     * Session for effects attached to a particular sink or source audio device
+     * (e.g an effect only applied to a speaker)
+     */
+    DEVICE = -2,
+    /**
+     * Session for effects attached to a particular output stream
+     * (value must be less than 0)
+     */
+    OUTPUT_STAGE = -1,
+    /**
+     * Session for effects applied to output mix. These effects can
+     * be moved by audio policy manager to another output stream
+     * (value must be 0)
+     */
+    OUTPUT_MIX = 0,
+};
+
+/**
+ * Audio format indicates audio codec type.
+ * See 'audioFormat' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioFormat;
+
+/**
+ * Audio channel mask indicates presence of particular channels.
+ * See 'audioChannelMask' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioChannelMask;
+
+/**
+ * Basic configuration applicable to any stream of audio.
+ */
+struct AudioBasicConfig {
+    uint32_t sampleRateHz;              // 0 means 'unspecified'
+    vec<AudioChannelMask> channelMask;  // empty means 'unspecified'
+    AudioFormat format;                 // 'DEFAULT' means 'unspecified'
+};
+
+/**
+ * Major modes for a mobile device. The current mode setting affects audio
+ * routing.
+ */
+@export(name="audio_mode_t", value_prefix="AUDIO_MODE_")
+enum AudioMode : int32_t {
+    NORMAL           = 0,
+    RINGTONE         = 1,
+    /** Calls handled by the telephony stack (Eg: PSTN). */
+    IN_CALL          = 2,
+    /** Calls handled by apps (Eg: Hangout). */
+    IN_COMMUNICATION = 3,
+    /** Call screening in progress. */
+    CALL_SCREEN      = 4,
+};
+
+/**
+ * Specifies a device address in case when several devices of the same type
+ * can be connected (e.g. BT A2DP, USB).
+ */
+struct DeviceAddress {
+    /**
+     * Audio device specifies type (or category) of audio I/O device
+     * (e.g. speaker or headphones).
+     * See 'audioDevice' in audio_policy_configuration.xsd for the
+     * list of allowed values.
+     */
+    string deviceType;
+    safe_union Address {
+        /**
+         * The address may be left unspecified if 'device' specifies
+         * a physical device unambiguously.
+         */
+        Monostate unspecified;
+        /** IEEE 802 MAC address. Set for Bluetooth devices. */
+        uint8_t[6] mac;
+        /** IPv4 Address. Set for IPv4 devices. */
+        uint8_t[4] ipv4;
+        /** IPv6 Address. Set for IPv6 devices. */
+        uint16_t[8] ipv6;
+        /** PCI bus Address. Set for USB devices. */
+        struct Alsa {
+            int32_t card;
+            int32_t device;
+        } alsa;
+        /** Arbitrary BUS device unique address. Not interpreted by the framework. */
+        string bus;
+        /** Arbitrary REMOTE_SUBMIX device unique address. Not interpreted by the HAL. */
+        string rSubmix;
+    } address;
+};
+
+/**
+ * Audio usage specifies the intended use case for the sound being played.
+ * See 'audioUsage' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioUsage;
+
+/**
+ * Audio content type expresses the general category of the content.
+ * See 'audioContentType' in audio_policy_configuration.xsd for the
+ * list of allowed values.
+ */
+typedef string AudioContentType;
+
+/** Encapsulation mode used for sending audio compressed data. */
+@export(name="audio_encapsulation_mode_t", value_prefix="AUDIO_ENCAPSULATION_MODE_")
+enum AudioEncapsulationMode : int32_t {
+    // Do not change these values without updating their counterparts
+    // in frameworks/base/media/java/android/media/AudioTrack.java
+    /**
+     * No encapsulation mode for metadata.
+     */
+    NONE              = 0,
+    /**
+     * Elementary stream payload with metadata
+     */
+    ELEMENTARY_STREAM = 1,
+    /**
+     *  Handle-based payload with metadata
+     */
+    HANDLE            = 2,
+};
+
+/**
+ * Additional information about the stream passed to hardware decoders.
+ */
+struct AudioOffloadInfo {
+    AudioBasicConfig base;
+    AudioStreamType streamType;
+    uint32_t bitRatePerSecond;
+    int64_t durationMicroseconds;  // -1 if unknown
+    bool hasVideo;
+    bool isStreaming;
+    uint32_t bitWidth;
+    uint32_t bufferSize;
+    AudioUsage usage;
+    AudioEncapsulationMode encapsulationMode;
+    int32_t contentId;
+    int32_t syncId;
+};
+
+/**
+ * Commonly used audio stream configuration parameters.
+ */
+struct AudioConfig {
+    AudioBasicConfig base;
+    AudioOffloadInfo offloadInfo;
+    uint64_t frameCount;
+};
+
+/** Metadata of a playback track for a StreamOut. */
+struct PlaybackTrackMetadata {
+    AudioUsage usage;
+    AudioContentType contentType;
+    /**
+     * Positive linear gain applied to the track samples. 0 being muted and 1 is no attenuation,
+     * 2 means double amplification...
+     * Must not be negative.
+     */
+    float gain;
+};
+
+/** Metadatas of the source of a StreamOut. */
+struct SourceMetadata {
+    vec<PlaybackTrackMetadata> tracks;
+};
+
+/** Metadata of a record track for a StreamIn. */
+struct RecordTrackMetadata {
+    AudioSource source;
+    /**
+     * Positive linear gain applied to the track samples. 0 being muted and 1 is no attenuation,
+     * 2 means double amplification...
+     * Must not be negative.
+     */
+    float gain;
+    /**
+     * Indicates the destination of an input stream, can be left unspecified.
+     */
+    safe_union Destination {
+        Monostate unspecified;
+        DeviceAddress device;
+    } destination;
+};
+
+/** Metadatas of the sink of a StreamIn. */
+struct SinkMetadata {
+    vec<RecordTrackMetadata> tracks;
+};
+
+/*
+ *
+ *  Volume control
+ *
+ */
+
+/**
+ * Type of gain control exposed by an audio port.
+ */
+@export(name="", value_prefix="AUDIO_GAIN_MODE_")
+enum AudioGainMode : uint32_t {
+    JOINT = 0x1,    // supports joint channel gain control
+    CHANNELS = 0x2, // supports separate channel gain control
+    RAMP = 0x4      // supports gain ramps
+};
+
+/**
+ * An audio_gain struct is a representation of a gain stage.
+ * A gain stage is always attached to an audio port.
+ */
+struct AudioGain {
+    bitfield<AudioGainMode> mode;
+    vec<AudioChannelMask> channelMask; // channels which gain an be controlled
+    int32_t minValue;     // minimum gain value in millibels
+    int32_t maxValue;     // maximum gain value in millibels
+    int32_t defaultValue; // default gain value in millibels
+    uint32_t stepValue;   // gain step in millibels
+    uint32_t minRampMs;   // minimum ramp duration in ms
+    uint32_t maxRampMs;   // maximum ramp duration in ms
+};
+
+/**
+ * The gain configuration structure is used to get or set the gain values of a
+ * given port.
+ */
+struct AudioGainConfig {
+    int32_t index;  // index of the corresponding AudioGain in AudioPort.gains
+    AudioGainMode mode;
+    vec<AudioChannelMask> channelMask;  // channels which gain value follows
+    /**
+     * Gain values in millibels for each channel ordered from LSb to MSb in
+     * channel mask. The number of values is 1 in joint mode or
+     * popcount(channel_mask).
+     */
+    int32_t[4 * 8] values;
+    uint32_t rampDurationMs;  // ramp duration in ms
+};
+
+
+/*
+ *
+ *  Routing control
+ *
+ */
+
+/*
+ * Types defined here are used to describe an audio source or sink at internal
+ * framework interfaces (audio policy, patch panel) or at the audio HAL.
+ * Sink and sources are grouped in a concept of “audio port” representing an
+ * audio end point at the edge of the system managed by the module exposing
+ * the interface.
+ */
+
+/**
+ * A helper aggregate structure providing parameters that depend on the
+ * port role.
+ */
+safe_union AudioPortExtendedInfo {
+    /** Set when no information is provided. */
+    Monostate unspecified;
+    /** Set when the audio port is an audio device. */
+    DeviceAddress device;
+    /** Set when the audio port is a mix. The handle is of a stream. */
+    struct AudioPortMixExt {
+        /** I/O handle of the input/output stream. */
+        AudioIoHandle ioHandle;
+        safe_union UseCase {
+            /** Specified when the port is in the SOURCE role. */
+            AudioStreamType stream;
+            /** Specified when the port is in the SINK role. */
+            AudioSource source;
+        } useCase;
+    } mix;
+    /** Set when the audio port is an audio session. */
+    AudioSession session;
+};
+
+/**
+ * Audio port configuration structure used to specify a particular configuration
+ * of an audio port.
+ */
+struct AudioPortConfig {
+    /**
+     * The 'id' field is set when it is needed to select the port and
+     * apply new configuration for it.
+     */
+    AudioPortHandle id;
+    /**
+     * Basic parameters: sampling rate, format, channel mask. Only some of the
+     * parameters (or none) may be set. See the documentation of the
+     * AudioBasicConfig struct.
+     */
+    AudioBasicConfig config;
+    /** Associated gain control. */
+    safe_union OptionalGain {
+        Monostate unspecified;
+        AudioGainConfig config;
+    } gain;
+    /** Parameters that depend on the actual port role. */
+    AudioPortExtendedInfo ext;
+};
+
+/**
+ * Audio port structure describes the capabilities of an audio port
+ * as well as its current configuration.
+ */
+struct AudioPort {
+    /**
+     * Unique identifier of the port within this HAL service. When calling
+     * from the client side functions like IDevice.getAudioPort is it allowed
+     * to only specify the 'id' and leave the other fields unspecified.
+     */
+    AudioPortHandle id;
+    /**
+     * Human-readable name describing the function of the port.
+     * E.g. "telephony_tx" or "fm_tuner".
+     */
+    string name;
+    /** List of audio profiles supported by the port. */
+    struct AudioProfile {
+        AudioFormat format;
+        /** List of the sample rates supported by the profile. */
+        vec<uint32_t> sampleRates;
+        /** List of channel masks supported by the profile. */
+        vec<AudioChannelMask> channelMasks;
+    };
+    vec<AudioProfile> profiles;
+    /** List of gain controls attached to the port. */
+    vec<AudioGain> gains;
+    /**
+     * Current configuration of the audio port, may have all the fields left
+     * unspecified.
+     */
+    AudioPortConfig activeConfig;
+};
diff --git a/audio/common/all-versions/copyHAL.sh b/audio/common/all-versions/copyHAL.sh
index 0a32a51..23e057a 100755
--- a/audio/common/all-versions/copyHAL.sh
+++ b/audio/common/all-versions/copyHAL.sh
@@ -16,6 +16,7 @@
 readonly HAL_DIRECTORY=hardware/interfaces/audio
 readonly HAL_VTS_DIRECTORY=core/all-versions/vts/functional
 readonly HAL_VTS_FILE=AudioPrimaryHidlHalTest.cpp
+readonly HAL_EFFECT_VTS_DIRECTORY=effect/all-versions/vts/functional
 readonly HAL_SERVICE_DIRECTORY=common/all-versions/default/service/
 readonly HAL_SERVICE_CPP=service.cpp
 
@@ -25,7 +26,7 @@
 
 readonly VTS_DIRECTORY=test/vts-testcase/hal/audio
 readonly VTS_LIST=test/vts/tools/build/tasks/list/vts_test_lib_hidl_package_list.mk
-readonly WATCHDOG=frameworks/base/services/core/java/com/android/server/Watchdog.cpp
+readonly WATCHDOG=frameworks/base/services/core/java/com/android/server/Watchdog.java
 readonly DUMP_UTILS=frameworks/native/libs/dumputils/dump_utils.cpp
 readonly GSI_CURRENT=build/make/target/product/gsi/current.txt
 
@@ -45,6 +46,9 @@
 readonly BASE_VERSION_ESCAPE="${BASE_MAJOR_VERSION}\.${BASE_MINOR_VERSION}"
 readonly BASE_VERSION_UNDERSCORE="${BASE_MAJOR_VERSION}_${BASE_MINOR_VERSION}"
 readonly NEW_VERSION_UNDERSCORE="${NEW_MAJOR_VERSION}_${NEW_MINOR_VERSION}"
+
+readonly HAL_VTS_CONFIG_FILE_GLOB="*Audio*V${BASE_VERSION_UNDERSCORE}*Test.xml"
+
 updateVersion() {
     if [ $1 == "-e" ]; then
         local -r REGEX="$2"; shift 2
@@ -71,6 +75,10 @@
     updateVersion -e "audio.*$BASE_VERSION_REGEX" "$@"
 }
 
+updateAudioVtsTargetVersion() {
+    updateVersion -e "Audio.*V$BASE_VERSION_REGEX" "$@"
+}
+
 updateLicenceDates() {
     # Update date on the 2 first lines
     sed -i "1,2 s/20[0-9][0-9]/$(date +"%Y")/g" "$@"
@@ -101,9 +109,16 @@
         cp -Tar $DIR/$BASE_VERSION $DIR/$NEW_VERSION
         COPY+=" $DIR/$NEW_VERSION"
     done
+    local COPY_FILES_TO=
+    for FILE_FROM in $(find . -type f -name "$HAL_VTS_CONFIG_FILE_GLOB"); do
+        local FILE_TO=${FILE_FROM/$BASE_VERSION_UNDERSCORE/$NEW_VERSION_UNDERSCORE}
+        cp "$FILE_FROM" "$FILE_TO"
+        COPY_FILES_TO+=" $FILE_TO"
+    done
 
     echo "Replacing $BASE_VERSION by $NEW_VERSION in the copied files"
     updateVersion $(find $COPY -type f)
+    updateVersion $COPY_FILES_TO
     updateLicenceDates $(find $COPY -type f)
 
     echo "Update implementation and VTS generic code"
@@ -156,18 +171,12 @@
 echo "Now creating the framework adapter version"
 runIfNeeded $FWK_DIRECTORY createFrameworkAdapter
 
-createVTSXML() {
-    cp -Tar V$BASE_VERSION_UNDERSCORE V$NEW_VERSION_UNDERSCORE
-    cp -Tar effect/{V$BASE_VERSION_UNDERSCORE,V$NEW_VERSION_UNDERSCORE}
-    local -r FILES=$(find {.,effect}/V$NEW_VERSION_UNDERSCORE -type f)
-    updateVersion $FILES
-    updateLicenceDates $FILES
-}
-echo "Now update VTS XML"
-runIfNeeded $VTS_DIRECTORY createVTSXML
-
 echo "Now register new VTS"
+PREV_MODIFIED="$MODIFIED"
 runIfNeeded $(dirname $VTS_LIST) updateAudioVersion -v original_before=1 $(basename $VTS_LIST)
+if [[ "$PREV_MODIFIED" != "$MODIFIED" ]]; then
+    updateAudioVtsTargetVersion -v original_after=1 $(basename $VTS_LIST)
+fi
 
 echo "Now update watchdog"
 runIfNeeded $(dirname $WATCHDOG) updateAudioVersion -v original_before=1 $(basename $WATCHDOG)
diff --git a/audio/common/all-versions/default/Android.bp b/audio/common/all-versions/default/Android.bp
index 0eb4a71..a72c8dc 100644
--- a/audio/common/all-versions/default/Android.bp
+++ b/audio/common/all-versions/default/Android.bp
@@ -36,7 +36,7 @@
     ],
     export_header_lib_headers: [
         "android.hardware.audio.common.util@all-versions",
-    ]
+    ],
 }
 
 cc_defaults {
@@ -57,7 +57,7 @@
         "android.hardware.audio.common-util",
     ],
     export_shared_lib_headers: [
-        "android.hardware.audio.common-util"
+        "android.hardware.audio.common-util",
     ],
 
     header_libs: [
@@ -76,7 +76,7 @@
         "-DMAJOR_VERSION=2",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_library_shared {
@@ -89,7 +89,7 @@
         "-DMAJOR_VERSION=4",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_library_shared {
@@ -102,7 +102,7 @@
         "-DMAJOR_VERSION=5",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_library_shared {
@@ -115,5 +115,19 @@
         "-DMAJOR_VERSION=6",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
+}
+
+cc_library_shared {
+    enabled: false,
+    name: "android.hardware.audio.common@7.0-util",
+    defaults: ["android.hardware.audio.common-util_default"],
+    shared_libs: [
+        "android.hardware.audio.common@7.0",
+    ],
+    cflags: [
+        "-DMAJOR_VERSION=7",
+        "-DMINOR_VERSION=0",
+        "-include common/all-versions/VersionMacro.h",
+    ],
 }
diff --git a/audio/core/all-versions/default/Android.bp b/audio/core/all-versions/default/Android.bp
index 8fdb70d..6be0628 100644
--- a/audio/core/all-versions/default/Android.bp
+++ b/audio/core/all-versions/default/Android.bp
@@ -123,3 +123,19 @@
     name: "android.hardware.audio@6.0-impl",
     defaults: ["android.hardware.audio@6.0-impl_default"],
 }
+
+cc_library_shared {
+    enabled: false,
+    name: "android.hardware.audio@7.0-impl",
+    defaults: ["android.hardware.audio-impl_default"],
+    shared_libs: [
+        "android.hardware.audio@7.0",
+        "android.hardware.audio.common@7.0",
+        "android.hardware.audio.common@7.0-util",
+    ],
+    cflags: [
+        "-DMAJOR_VERSION=7",
+        "-DMINOR_VERSION=0",
+        "-include common/all-versions/VersionMacro.h",
+    ],
+}
diff --git a/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp b/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
new file mode 100644
index 0000000..33efa6f
--- /dev/null
+++ b/audio/core/all-versions/vts/functional/7.0/AudioPrimaryHidlHalTest.cpp
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// pull in all the <= 6.0 tests
+#include "6.0/AudioPrimaryHidlHalTest.cpp"
diff --git a/audio/core/all-versions/vts/functional/Android.bp b/audio/core/all-versions/vts/functional/Android.bp
index 2d5e8a5..6ac9b20 100644
--- a/audio/core/all-versions/vts/functional/Android.bp
+++ b/audio/core/all-versions/vts/functional/Android.bp
@@ -128,3 +128,27 @@
     // TODO(b/146104851): Add auto-gen rules and remove it.
     test_config: "VtsHalAudioV6_0TargetTest.xml",
 }
+
+cc_test {
+    enabled: false,
+    name: "VtsHalAudioV7_0TargetTest",
+    defaults: ["VtsHalAudioTargetTest_defaults"],
+    srcs: [
+        "7.0/AudioPrimaryHidlHalTest.cpp",
+    ],
+    static_libs: [
+        "android.hardware.audio@7.0",
+        "android.hardware.audio.common@7.0",
+    ],
+    cflags: [
+        "-DMAJOR_VERSION=7",
+        "-DMINOR_VERSION=0",
+        "-include common/all-versions/VersionMacro.h",
+    ],
+    data: [
+        ":audio_policy_configuration_V7_0",
+    ],
+    // Use test_config for vts suite.
+    // TODO(b/146104851): Add auto-gen rules and remove it.
+    test_config: "VtsHalAudioV7_0TargetTest.xml",
+}
diff --git a/audio/core/all-versions/vts/functional/VtsHalAudioV7_0TargetTest.xml b/audio/core/all-versions/vts/functional/VtsHalAudioV7_0TargetTest.xml
new file mode 100644
index 0000000..6635f31
--- /dev/null
+++ b/audio/core/all-versions/vts/functional/VtsHalAudioV7_0TargetTest.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalAudioV7_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer"/>
+    <target_preparer class="com.android.tradefed.targetprep.StopServicesSetup"/>
+
+    <target_preparer class="com.android.tradefed.targetprep.RunCommandTargetPreparer">
+        <option name="run-command" value="setprop vts.native_server.on 1"/>
+        <option name="teardown-command" value="setprop vts.native_server.on 0"/>
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalAudioV7_0TargetTest->/data/local/tmp/VtsHalAudioV7_0TargetTest" />
+        <option name="push" value="audio_policy_configuration_V7_0.xsd->/data/local/tmp/audio_policy_configuration_V7_0.xsd" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalAudioV7_0TargetTest" />
+    </test>
+</configuration>
diff --git a/audio/effect/7.0/Android.bp b/audio/effect/7.0/Android.bp
new file mode 100644
index 0000000..c113782
--- /dev/null
+++ b/audio/effect/7.0/Android.bp
@@ -0,0 +1,30 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.audio.effect@7.0",
+    root: "android.hardware",
+    srcs: [
+        "types.hal",
+        "IAcousticEchoCancelerEffect.hal",
+        "IAutomaticGainControlEffect.hal",
+        "IBassBoostEffect.hal",
+        "IDownmixEffect.hal",
+        "IEffect.hal",
+        "IEffectBufferProviderCallback.hal",
+        "IEffectsFactory.hal",
+        "IEnvironmentalReverbEffect.hal",
+        "IEqualizerEffect.hal",
+        "ILoudnessEnhancerEffect.hal",
+        "INoiseSuppressionEffect.hal",
+        "IPresetReverbEffect.hal",
+        "IVirtualizerEffect.hal",
+        "IVisualizerEffect.hal",
+    ],
+    interfaces: [
+        "android.hardware.audio.common@7.0",
+        "android.hidl.base@1.0",
+        "android.hidl.safe_union@1.0",
+    ],
+    gen_java: false,
+    gen_java_constants: true,
+}
diff --git a/audio/effect/7.0/IAcousticEchoCancelerEffect.hal b/audio/effect/7.0/IAcousticEchoCancelerEffect.hal
new file mode 100644
index 0000000..2bc2a7f
--- /dev/null
+++ b/audio/effect/7.0/IAcousticEchoCancelerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IAcousticEchoCancelerEffect extends IEffect {
+    /**
+     * Sets echo delay value in milliseconds.
+     */
+    setEchoDelay(uint32_t echoDelayMs) generates (Result retval);
+
+    /**
+     * Gets echo delay value in milliseconds.
+     */
+    getEchoDelay() generates (Result retval, uint32_t echoDelayMs);
+};
diff --git a/audio/effect/7.0/IAutomaticGainControlEffect.hal b/audio/effect/7.0/IAutomaticGainControlEffect.hal
new file mode 100644
index 0000000..8ffa659
--- /dev/null
+++ b/audio/effect/7.0/IAutomaticGainControlEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IAutomaticGainControlEffect extends IEffect {
+    /**
+     * Sets target level in millibels.
+     */
+    setTargetLevel(int16_t targetLevelMb) generates (Result retval);
+
+    /**
+     * Gets target level.
+     */
+    getTargetLevel() generates (Result retval, int16_t targetLevelMb);
+
+    /**
+     * Sets gain in the compression range in millibels.
+     */
+    setCompGain(int16_t compGainMb) generates (Result retval);
+
+    /**
+     * Gets gain in the compression range.
+     */
+    getCompGain() generates (Result retval, int16_t compGainMb);
+
+    /**
+     * Enables or disables limiter.
+     */
+    setLimiterEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Returns whether limiter is enabled.
+     */
+    isLimiterEnabled() generates (Result retval, bool enabled);
+
+    struct AllProperties {
+        int16_t targetLevelMb;
+        int16_t compGainMb;
+        bool limiterEnabled;
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/7.0/IBassBoostEffect.hal b/audio/effect/7.0/IBassBoostEffect.hal
new file mode 100644
index 0000000..d8d049e
--- /dev/null
+++ b/audio/effect/7.0/IBassBoostEffect.hal
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IBassBoostEffect extends IEffect {
+    /**
+     * Returns whether setting bass boost strength is supported.
+     */
+    isStrengthSupported() generates (Result retval, bool strengthSupported);
+
+    enum StrengthRange : uint16_t {
+        MIN = 0,
+        MAX = 1000
+    };
+
+    /**
+     * Sets bass boost strength.
+     *
+     * @param strength strength of the effect. The valid range for strength
+     *                 strength is [0, 1000], where 0 per mille designates the
+     *                 mildest effect and 1000 per mille designates the
+     *                 strongest.
+     * @return retval operation completion status.
+     */
+    setStrength(uint16_t strength) generates (Result retval);
+
+    /**
+     * Gets virtualization strength.
+     */
+    getStrength() generates (Result retval, uint16_t strength);
+};
diff --git a/audio/effect/7.0/IDownmixEffect.hal b/audio/effect/7.0/IDownmixEffect.hal
new file mode 100644
index 0000000..2035430
--- /dev/null
+++ b/audio/effect/7.0/IDownmixEffect.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IDownmixEffect extends IEffect {
+    enum Type : int32_t {
+        STRIP, // throw away the extra channels
+        FOLD   // mix the extra channels with FL/FR
+    };
+
+    /**
+     * Sets the current downmix preset.
+     */
+    setType(Type preset) generates (Result retval);
+
+    /**
+     * Gets the current downmix preset.
+     */
+    getType() generates (Result retval, Type preset);
+};
diff --git a/audio/effect/7.0/IEffect.hal b/audio/effect/7.0/IEffect.hal
new file mode 100644
index 0000000..aa94f6d
--- /dev/null
+++ b/audio/effect/7.0/IEffect.hal
@@ -0,0 +1,417 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffectBufferProviderCallback;
+
+interface IEffect {
+    /**
+     * Initialize effect engine--all configurations return to default.
+     *
+     * @return retval operation completion status.
+     */
+    @entry
+    init() generates (Result retval);
+
+    /**
+     * Apply new audio parameters configurations for input and output buffers.
+     * The provider callbacks may be empty, but in this case the buffer
+     * must be provided in the EffectConfig structure.
+     *
+     * @param config configuration descriptor.
+     * @param inputBufferProvider optional buffer provider reference.
+     * @param outputBufferProvider optional buffer provider reference.
+     * @return retval operation completion status.
+     */
+    setConfig(EffectConfig config,
+            IEffectBufferProviderCallback inputBufferProvider,
+            IEffectBufferProviderCallback outputBufferProvider)
+            generates (Result retval);
+
+    /**
+     * Reset the effect engine. Keep configuration but resets state and buffer
+     * content.
+     *
+     * @return retval operation completion status.
+     */
+    reset() generates (Result retval);
+
+    /**
+     * Enable processing.
+     *
+     * @return retval operation completion status.
+     */
+    enable() generates (Result retval);
+
+    /**
+     * Disable processing.
+     *
+     * @return retval operation completion status.
+     */
+    disable() generates (Result retval);
+
+    /**
+     * Set the rendering device the audio output path is connected to.  The
+     * effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its
+     * descriptor to receive this command when the device changes.
+     *
+     * Note: this method is only supported for effects inserted into
+     *       the output chain.
+     *
+     * @param device output device specification.
+     * @return retval operation completion status.
+     */
+    setDevice(DeviceAddress device) generates (Result retval);
+
+    /**
+     * Set and get volume. Used by audio framework to delegate volume control to
+     * effect engine. The effect implementation must set EFFECT_FLAG_VOLUME_CTRL
+     * flag in its descriptor to receive this command. The effect engine must
+     * return the volume that should be applied before the effect is
+     * processed. The overall volume (the volume actually applied by the effect
+     * engine multiplied by the returned value) should match the value indicated
+     * in the command.
+     *
+     * @param volumes vector containing volume for each channel defined in
+     *                EffectConfig for output buffer expressed in 8.24 fixed
+     *                point format.
+     * @return result updated volume values.
+     * @return retval operation completion status.
+     */
+    setAndGetVolume(vec<uint32_t> volumes)
+            generates (Result retval, vec<uint32_t> result);
+
+    /**
+     * Notify the effect of the volume change. The effect implementation must
+     * set EFFECT_FLAG_VOLUME_IND flag in its descriptor to receive this
+     * command.
+     *
+     * @param volumes vector containing volume for each channel defined in
+     *                EffectConfig for output buffer expressed in 8.24 fixed
+     *                point format.
+     * @return retval operation completion status.
+     */
+    volumeChangeNotification(vec<uint32_t> volumes)
+            generates (Result retval);
+
+    /**
+     * Set the audio mode. The effect implementation must set
+     * EFFECT_FLAG_AUDIO_MODE_IND flag in its descriptor to receive this command
+     * when the audio mode changes.
+     *
+     * @param mode desired audio mode.
+     * @return retval operation completion status.
+     */
+    setAudioMode(AudioMode mode) generates (Result retval);
+
+    /**
+     * Apply new audio parameters configurations for input and output buffers of
+     * reverse stream.  An example of reverse stream is the echo reference
+     * supplied to an Acoustic Echo Canceler.
+     *
+     * @param config configuration descriptor.
+     * @param inputBufferProvider optional buffer provider reference.
+     * @param outputBufferProvider optional buffer provider reference.
+     * @return retval operation completion status.
+     */
+    setConfigReverse(EffectConfig config,
+            IEffectBufferProviderCallback inputBufferProvider,
+            IEffectBufferProviderCallback outputBufferProvider)
+            generates (Result retval);
+
+    /**
+     * Set the capture device the audio input path is connected to. The effect
+     * implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to
+     * receive this command when the device changes.
+     *
+     * Note: this method is only supported for effects inserted into
+     *       the input chain.
+     *
+     * @param device input device specification.
+     * @return retval operation completion status.
+     */
+    setInputDevice(DeviceAddress device) generates (Result retval);
+
+    /**
+     * Read audio parameters configurations for input and output buffers.
+     *
+     * @return retval operation completion status.
+     * @return config configuration descriptor.
+     */
+    getConfig() generates (Result retval, EffectConfig config);
+
+    /**
+     * Read audio parameters configurations for input and output buffers of
+     * reverse stream.
+     *
+     * @return retval operation completion status.
+     * @return config configuration descriptor.
+     */
+    getConfigReverse() generates (Result retval, EffectConfig config);
+
+    /**
+     * Queries for supported combinations of main and auxiliary channels
+     * (e.g. for a multi-microphone noise suppressor).
+     *
+     * @param maxConfigs maximum number of the combinations to return.
+     * @return retval absence of the feature support is indicated using
+     *                NOT_SUPPORTED code. RESULT_TOO_BIG is returned if
+     *                the number of supported combinations exceeds 'maxConfigs'.
+     * @return result list of configuration descriptors.
+     */
+    getSupportedAuxChannelsConfigs(uint32_t maxConfigs)
+            generates (Result retval, vec<EffectAuxChannelsConfig> result);
+
+    /**
+     * Retrieves the current configuration of main and auxiliary channels.
+     *
+     * @return retval absence of the feature support is indicated using
+     *                NOT_SUPPORTED code.
+     * @return result configuration descriptor.
+     */
+    getAuxChannelsConfig()
+            generates (Result retval, EffectAuxChannelsConfig result);
+
+    /**
+     * Sets the current configuration of main and auxiliary channels.
+     *
+     * @return retval operation completion status; absence of the feature
+     *                support is indicated using NOT_SUPPORTED code.
+     */
+    setAuxChannelsConfig(EffectAuxChannelsConfig config)
+            generates (Result retval);
+
+    /**
+     * Set the audio source the capture path is configured for (Camcorder, voice
+     * recognition...).
+     *
+     * Note: this method is only supported for effects inserted into
+     *       the input chain.
+     *
+     * @param source source descriptor.
+     * @return retval operation completion status.
+     */
+    setAudioSource(AudioSource source) generates (Result retval);
+
+    /**
+     * This command indicates if the playback thread the effect is attached to
+     * is offloaded or not, and updates the I/O handle of the playback thread
+     * the effect is attached to.
+     *
+     * @param param effect offload descriptor.
+     * @return retval operation completion status.
+     */
+    offload(EffectOffloadParameter param) generates (Result retval);
+
+    /**
+     * Returns the effect descriptor.
+     *
+     * @return retval operation completion status.
+     * @return descriptor effect descriptor.
+     */
+    getDescriptor() generates (Result retval, EffectDescriptor descriptor);
+
+    /**
+     * Set up required transports for passing audio buffers to the effect.
+     *
+     * The transport consists of shared memory and a message queue for reporting
+     * effect processing operation status. The shared memory is set up
+     * separately using 'setProcessBuffers' method.
+     *
+     * Processing is requested by setting 'REQUEST_PROCESS' or
+     * 'REQUEST_PROCESS_REVERSE' EventFlags associated with the status message
+     * queue. The result of processing may be one of the following:
+     *   OK if there were no errors during processing;
+     *   INVALID_ARGUMENTS if audio buffers are invalid;
+     *   INVALID_STATE if the engine has finished the disable phase;
+     *   NOT_INITIALIZED if the audio buffers were not set;
+     *   NOT_SUPPORTED if the requested processing type is not supported by
+     *                 the effect.
+     *
+     * @return retval OK if both message queues were created successfully.
+     *                INVALID_STATE if the method was already called.
+     *                INVALID_ARGUMENTS if there was a problem setting up
+     *                                  the queue.
+     * @return statusMQ a message queue used for passing status from the effect.
+     */
+    prepareForProcessing() generates (Result retval, fmq_sync<Result> statusMQ);
+
+    /**
+     * Set up input and output buffers for processing audio data. The effect
+     * may modify both the input and the output buffer during the operation.
+     * Buffers may be set multiple times during effect lifetime.
+     *
+     * The input and the output buffer may be reused between different effects,
+     * and the input buffer may be used as an output buffer. Buffers are
+     * distinguished using 'AudioBuffer.id' field.
+     *
+     * @param inBuffer input audio buffer.
+     * @param outBuffer output audio buffer.
+     * @return retval OK if both buffers were mapped successfully.
+     *                INVALID_ARGUMENTS if there was a problem with mapping
+     *                                  any of the buffers.
+     */
+    setProcessBuffers(AudioBuffer inBuffer, AudioBuffer outBuffer)
+            generates (Result retval);
+
+    /**
+     * Execute a vendor specific command on the effect. The command code
+     * and data, as well as result data are not interpreted by Android
+     * Framework and are passed as-is between the application and the effect.
+     *
+     * The effect must use standard POSIX.1-2001 error codes for the operation
+     * completion status.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it. This method only works for effects
+     * implemented in software.
+     *
+     * @param commandId the ID of the command.
+     * @param data command data.
+     * @param resultMaxSize maximum size in bytes of the result; can be 0.
+     * @return status command completion status.
+     * @return result result data.
+     */
+    command(uint32_t commandId, vec<uint8_t> data, uint32_t resultMaxSize)
+            generates (int32_t status, vec<uint8_t> result);
+
+    /**
+     * Set a vendor-specific parameter and apply it immediately. The parameter
+     * code and data are not interpreted by Android Framework and are passed
+     * as-is between the application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+     * unknown or if provided parameter data is invalid. If the effect does not
+     * support setting vendor-specific parameters, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it. This method only works for effects
+     * implemented in software.
+     *
+     * @param parameter identifying data of the parameter.
+     * @param value the value of the parameter.
+     * @return retval operation completion status.
+     */
+    setParameter(vec<uint8_t> parameter, vec<uint8_t> value)
+            generates (Result retval);
+
+    /**
+     * Get a vendor-specific parameter value. The parameter code and returned
+     * data are not interpreted by Android Framework and are passed as-is
+     * between the application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+     * unknown. If the effect does not support setting vendor-specific
+     * parameters, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param parameter identifying data of the parameter.
+     * @param valueMaxSize maximum size in bytes of the value.
+     * @return retval operation completion status.
+     * @return result the value of the parameter.
+     */
+    getParameter(vec<uint8_t> parameter, uint32_t valueMaxSize)
+            generates (Result retval, vec<uint8_t> value);
+
+    /**
+     * Get supported configs for a vendor-specific feature. The configs returned
+     * are not interpreted by Android Framework and are passed as-is between the
+     * application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+     * unknown. If the effect does not support getting vendor-specific feature
+     * configs, it must return NOT_SUPPORTED. If the feature is supported but
+     * the total number of supported configurations exceeds the maximum number
+     * indicated by the caller, the method must return RESULT_TOO_BIG.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param featureId feature identifier.
+     * @param maxConfigs maximum number of configs to return.
+     * @param configSize size of each config in bytes.
+     * @return retval operation completion status.
+     * @return configsCount number of configs returned.
+     * @return configsData data for all the configs returned.
+     */
+    getSupportedConfigsForFeature(
+            uint32_t featureId,
+            uint32_t maxConfigs,
+            uint32_t configSize) generates (
+                    Result retval,
+                    uint32_t configsCount,
+                    vec<uint8_t> configsData);
+
+    /**
+     * Get the current config for a vendor-specific feature. The config returned
+     * is not interpreted by Android Framework and is passed as-is between the
+     * application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+     * unknown. If the effect does not support getting vendor-specific
+     * feature configs, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param featureId feature identifier.
+     * @param configSize size of the config in bytes.
+     * @return retval operation completion status.
+     * @return configData config data.
+     */
+    getCurrentConfigForFeature(uint32_t featureId, uint32_t configSize)
+            generates (Result retval, vec<uint8_t> configData);
+
+    /**
+     * Set the current config for a vendor-specific feature. The config data
+     * is not interpreted by Android Framework and is passed as-is between the
+     * application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+     * unknown. If the effect does not support getting vendor-specific
+     * feature configs, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param featureId feature identifier.
+     * @param configData config data.
+     * @return retval operation completion status.
+     */
+    setCurrentConfigForFeature(uint32_t featureId, vec<uint8_t> configData)
+            generates (Result retval);
+
+    /**
+     * Called by the framework to deinitialize the effect and free up
+     * all currently allocated resources. It is recommended to close
+     * the effect on the client side as soon as it is becomes unused.
+     *
+     * The client must ensure that this function is not called while
+     * audio data is being transferred through the effect's message queues.
+     *
+     * @return retval OK in case the success.
+     *                INVALID_STATE if the effect was already closed.
+     */
+    close() generates (Result retval);
+};
diff --git a/audio/effect/7.0/IEffectBufferProviderCallback.hal b/audio/effect/7.0/IEffectBufferProviderCallback.hal
new file mode 100644
index 0000000..d18f7df
--- /dev/null
+++ b/audio/effect/7.0/IEffectBufferProviderCallback.hal
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+/**
+ * This callback interface contains functions that can be used by the effect
+ * engine 'process' function to exchange input and output audio buffers.
+ */
+interface IEffectBufferProviderCallback {
+    /**
+     * Called to retrieve a buffer where data should read from by 'process'
+     * function.
+     *
+     * @return buffer audio buffer for processing
+     */
+    getBuffer() generates (AudioBuffer buffer);
+
+    /**
+     * Called to provide a buffer with the data written by 'process' function.
+     *
+     * @param buffer audio buffer for processing
+     */
+    putBuffer(AudioBuffer buffer);
+};
diff --git a/audio/effect/7.0/IEffectsFactory.hal b/audio/effect/7.0/IEffectsFactory.hal
new file mode 100644
index 0000000..337251c
--- /dev/null
+++ b/audio/effect/7.0/IEffectsFactory.hal
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IEffectsFactory {
+    /**
+     * Returns descriptors of different effects in all loaded libraries.
+     *
+     * @return retval operation completion status.
+     * @return result list of effect descriptors.
+     */
+    getAllDescriptors() generates(Result retval, vec<EffectDescriptor> result);
+
+    /**
+     * Returns a descriptor of a particular effect.
+     *
+     * @return retval operation completion status.
+     * @return result effect descriptor.
+     */
+    getDescriptor(Uuid uid) generates(Result retval, EffectDescriptor result);
+
+    /**
+     * Creates an effect engine of the specified type.  To release the effect
+     * engine, it is necessary to release references to the returned effect
+     * object.
+     *
+     * @param uid effect uuid.
+     * @param session audio session to which this effect instance will be
+     *                attached.  All effects created with the same session ID
+     *                are connected in series and process the same signal
+     *                stream.
+     * @param ioHandle identifies the output or input stream this effect is
+     *                 directed to in audio HAL.
+     * @param device identifies the sink or source device this effect is directed to in the
+     *               audio HAL. Must be specified if session is AudioSessionConsts.DEVICE.
+     *               "device" is the AudioPortHandle used for the device when the audio
+     *               patch is created at the audio HAL.
+     * @return retval operation completion status.
+     * @return result the interface for the created effect.
+     * @return effectId the unique ID of the effect to be used with
+     *                  IStream::addEffect and IStream::removeEffect methods.
+     */
+    createEffect(Uuid uid, AudioSession session, AudioIoHandle ioHandle, AudioPortHandle device)
+        generates (Result retval, IEffect result, uint64_t effectId);
+};
diff --git a/audio/effect/7.0/IEnvironmentalReverbEffect.hal b/audio/effect/7.0/IEnvironmentalReverbEffect.hal
new file mode 100644
index 0000000..e02cfbc
--- /dev/null
+++ b/audio/effect/7.0/IEnvironmentalReverbEffect.hal
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IEnvironmentalReverbEffect extends IEffect {
+    /**
+     * Sets whether the effect should be bypassed.
+     */
+    setBypass(bool bypass) generates (Result retval);
+
+    /**
+     * Gets whether the effect should be bypassed.
+     */
+    getBypass() generates (Result retval, bool bypass);
+
+    enum ParamRange : int16_t {
+        ROOM_LEVEL_MIN = -6000,
+        ROOM_LEVEL_MAX = 0,
+        ROOM_HF_LEVEL_MIN = -4000,
+        ROOM_HF_LEVEL_MAX = 0,
+        DECAY_TIME_MIN = 100,
+        DECAY_TIME_MAX = 20000,
+        DECAY_HF_RATIO_MIN = 100,
+        DECAY_HF_RATIO_MAX = 1000,
+        REFLECTIONS_LEVEL_MIN = -6000,
+        REFLECTIONS_LEVEL_MAX = 0,
+        REFLECTIONS_DELAY_MIN = 0,
+        REFLECTIONS_DELAY_MAX = 65,
+        REVERB_LEVEL_MIN = -6000,
+        REVERB_LEVEL_MAX = 0,
+        REVERB_DELAY_MIN = 0,
+        REVERB_DELAY_MAX = 65,
+        DIFFUSION_MIN = 0,
+        DIFFUSION_MAX = 1000,
+        DENSITY_MIN = 0,
+        DENSITY_MAX = 1000
+    };
+
+    /**
+     * Sets the room level.
+     */
+    setRoomLevel(int16_t roomLevel) generates (Result retval);
+
+    /**
+     * Gets the room level.
+     */
+    getRoomLevel() generates (Result retval, int16_t roomLevel);
+
+    /**
+     * Sets the room high frequencies level.
+     */
+    setRoomHfLevel(int16_t roomHfLevel) generates (Result retval);
+
+    /**
+     * Gets the room high frequencies level.
+     */
+    getRoomHfLevel() generates (Result retval, int16_t roomHfLevel);
+
+    /**
+     * Sets the room decay time.
+     */
+    setDecayTime(uint32_t decayTime) generates (Result retval);
+
+    /**
+     * Gets the room decay time.
+     */
+    getDecayTime() generates (Result retval, uint32_t decayTime);
+
+    /**
+     * Sets the ratio of high frequencies decay.
+     */
+    setDecayHfRatio(int16_t decayHfRatio) generates (Result retval);
+
+    /**
+     * Gets the ratio of high frequencies decay.
+     */
+    getDecayHfRatio() generates (Result retval, int16_t decayHfRatio);
+
+    /**
+     * Sets the level of reflections in the room.
+     */
+    setReflectionsLevel(int16_t reflectionsLevel) generates (Result retval);
+
+    /**
+     * Gets the level of reflections in the room.
+     */
+    getReflectionsLevel() generates (Result retval, int16_t reflectionsLevel);
+
+    /**
+     * Sets the reflections delay in the room.
+     */
+    setReflectionsDelay(uint32_t reflectionsDelay) generates (Result retval);
+
+    /**
+     * Gets the reflections delay in the room.
+     */
+    getReflectionsDelay() generates (Result retval, uint32_t reflectionsDelay);
+
+    /**
+     * Sets the reverb level of the room.
+     */
+    setReverbLevel(int16_t reverbLevel) generates (Result retval);
+
+    /**
+     * Gets the reverb level of the room.
+     */
+    getReverbLevel() generates (Result retval, int16_t reverbLevel);
+
+    /**
+     * Sets the reverb delay of the room.
+     */
+    setReverbDelay(uint32_t reverDelay) generates (Result retval);
+
+    /**
+     * Gets the reverb delay of the room.
+     */
+    getReverbDelay() generates (Result retval, uint32_t reverbDelay);
+
+    /**
+     * Sets room diffusion.
+     */
+    setDiffusion(int16_t diffusion) generates (Result retval);
+
+    /**
+     * Gets room diffusion.
+     */
+    getDiffusion() generates (Result retval, int16_t diffusion);
+
+    /**
+     * Sets room wall density.
+     */
+    setDensity(int16_t density) generates (Result retval);
+
+    /**
+     * Gets room wall density.
+     */
+    getDensity() generates (Result retval, int16_t density);
+
+    struct AllProperties {
+        int16_t  roomLevel;         // in millibels,    range -6000 to 0
+        int16_t  roomHfLevel;       // in millibels,    range -4000 to 0
+        uint32_t decayTime;         // in milliseconds, range 100 to 20000
+        int16_t  decayHfRatio;      // in permilles,    range 100 to 1000
+        int16_t  reflectionsLevel;  // in millibels,    range -6000 to 0
+        uint32_t reflectionsDelay;  // in milliseconds, range 0 to 65
+        int16_t  reverbLevel;       // in millibels,    range -6000 to 0
+        uint32_t reverbDelay;       // in milliseconds, range 0 to 65
+        int16_t  diffusion;         // in permilles,    range 0 to 1000
+        int16_t  density;           // in permilles,    range 0 to 1000
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/7.0/IEqualizerEffect.hal b/audio/effect/7.0/IEqualizerEffect.hal
new file mode 100644
index 0000000..e7d7ae1
--- /dev/null
+++ b/audio/effect/7.0/IEqualizerEffect.hal
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IEqualizerEffect extends IEffect {
+    /**
+     * Gets the number of frequency bands that the equalizer supports.
+     */
+    getNumBands() generates (Result retval, uint16_t numBands);
+
+    /**
+     * Returns the minimum and maximum band levels supported.
+     */
+    getLevelRange()
+            generates (Result retval, int16_t minLevel, int16_t maxLevel);
+
+    /**
+     * Sets the gain for the given equalizer band.
+     */
+    setBandLevel(uint16_t band, int16_t level) generates (Result retval);
+
+    /**
+     * Gets the gain for the given equalizer band.
+     */
+    getBandLevel(uint16_t band) generates (Result retval, int16_t level);
+
+    /**
+     * Gets the center frequency of the given band, in milliHertz.
+     */
+    getBandCenterFrequency(uint16_t band)
+            generates (Result retval, uint32_t centerFreqmHz);
+
+    /**
+     * Gets the frequency range of the given frequency band, in milliHertz.
+     */
+    getBandFrequencyRange(uint16_t band)
+            generates (Result retval, uint32_t minFreqmHz, uint32_t maxFreqmHz);
+
+    /**
+     * Gets the band that has the most effect on the given frequency
+     * in milliHertz.
+     */
+    getBandForFrequency(uint32_t freqmHz)
+            generates (Result retval, uint16_t band);
+
+    /**
+     * Gets the names of all presets the equalizer supports.
+     */
+    getPresetNames() generates (Result retval, vec<string> names);
+
+    /**
+     * Sets the current preset using the index of the preset in the names
+     * vector returned via 'getPresetNames'.
+     */
+    setCurrentPreset(uint16_t preset) generates (Result retval);
+
+    /**
+     * Gets the current preset.
+     */
+    getCurrentPreset() generates (Result retval, uint16_t preset);
+
+    struct AllProperties {
+        uint16_t curPreset;
+        vec<int16_t> bandLevels;
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/7.0/ILoudnessEnhancerEffect.hal b/audio/effect/7.0/ILoudnessEnhancerEffect.hal
new file mode 100644
index 0000000..0304f20
--- /dev/null
+++ b/audio/effect/7.0/ILoudnessEnhancerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface ILoudnessEnhancerEffect extends IEffect {
+    /**
+     * Sets target gain expressed in millibels.
+     */
+    setTargetGain(int32_t targetGainMb) generates (Result retval);
+
+    /**
+     * Gets target gain expressed in millibels.
+     */
+    getTargetGain() generates (Result retval, int32_t targetGainMb);
+};
diff --git a/audio/effect/7.0/INoiseSuppressionEffect.hal b/audio/effect/7.0/INoiseSuppressionEffect.hal
new file mode 100644
index 0000000..2c6210c
--- /dev/null
+++ b/audio/effect/7.0/INoiseSuppressionEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface INoiseSuppressionEffect extends IEffect {
+    enum Level : int32_t {
+        LOW,
+        MEDIUM,
+        HIGH
+    };
+
+    /**
+     * Sets suppression level.
+     */
+    setSuppressionLevel(Level level) generates (Result retval);
+
+    /**
+     * Gets suppression level.
+     */
+    getSuppressionLevel() generates (Result retval, Level level);
+
+    enum Type : int32_t {
+        SINGLE_CHANNEL,
+        MULTI_CHANNEL
+    };
+
+    /**
+     * Set suppression type.
+     */
+    setSuppressionType(Type type) generates (Result retval);
+
+    /**
+     * Get suppression type.
+     */
+    getSuppressionType() generates (Result retval, Type type);
+
+    struct AllProperties {
+        Level level;
+        Type type;
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/7.0/IPresetReverbEffect.hal b/audio/effect/7.0/IPresetReverbEffect.hal
new file mode 100644
index 0000000..da61d24
--- /dev/null
+++ b/audio/effect/7.0/IPresetReverbEffect.hal
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IPresetReverbEffect extends IEffect {
+    enum Preset : int32_t {
+        NONE,        // no reverb or reflections
+        SMALLROOM,   // a small room less than five meters in length
+        MEDIUMROOM,  // a medium room with a length of ten meters or less
+        LARGEROOM,   // a large-sized room suitable for live performances
+        MEDIUMHALL,  // a medium-sized hall
+        LARGEHALL,   // a large-sized hall suitable for a full orchestra
+        PLATE,       // synthesis of the traditional plate reverb
+        LAST = PLATE
+    };
+
+    /**
+     * Sets the current preset.
+     */
+    setPreset(Preset preset) generates (Result retval);
+
+    /**
+     * Gets the current preset.
+     */
+    getPreset() generates (Result retval, Preset preset);
+};
diff --git a/audio/effect/7.0/IVirtualizerEffect.hal b/audio/effect/7.0/IVirtualizerEffect.hal
new file mode 100644
index 0000000..141b4e6
--- /dev/null
+++ b/audio/effect/7.0/IVirtualizerEffect.hal
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IVirtualizerEffect extends IEffect {
+    /**
+     * Returns whether setting virtualization strength is supported.
+     */
+    isStrengthSupported() generates (bool strengthSupported);
+
+    enum StrengthRange : uint16_t {
+        MIN = 0,
+        MAX = 1000
+    };
+
+    /**
+     * Sets virtualization strength.
+     *
+     * @param strength strength of the effect. The valid range for strength
+     *                 strength is [0, 1000], where 0 per mille designates the
+     *                 mildest effect and 1000 per mille designates the
+     *                 strongest.
+     * @return retval operation completion status.
+     */
+    setStrength(uint16_t strength) generates (Result retval);
+
+    /**
+     * Gets virtualization strength.
+     */
+    getStrength() generates (Result retval, uint16_t strength);
+
+    struct SpeakerAngle {
+        /** Speaker channel mask */
+        vec<AudioChannelMask> mask;
+        // all angles are expressed in degrees and
+        // are relative to the listener.
+        int16_t azimuth; // 0 is the direction the listener faces
+                         // 180 is behind the listener
+                         // -90 is to their left
+        int16_t elevation; // 0 is the horizontal plane
+                           // +90 is above the listener, -90 is below
+    };
+    /**
+     * Retrieves virtual speaker angles for the given channel mask on the
+     * specified device.
+     */
+    getVirtualSpeakerAngles(vec<AudioChannelMask> mask, DeviceAddress device)
+            generates (Result retval, vec<SpeakerAngle> speakerAngles);
+
+    /**
+     * Forces the virtualizer effect for the given output device.
+     */
+    forceVirtualizationMode(DeviceAddress device) generates (Result retval);
+
+    /**
+     * Returns audio device reflecting the current virtualization mode,
+     * Device type can be empty when not virtualizing.
+     */
+    getVirtualizationMode() generates (Result retval, DeviceAddress device);
+};
diff --git a/audio/effect/7.0/IVisualizerEffect.hal b/audio/effect/7.0/IVisualizerEffect.hal
new file mode 100644
index 0000000..b4e8659
--- /dev/null
+++ b/audio/effect/7.0/IVisualizerEffect.hal
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+import IEffect;
+
+interface IVisualizerEffect extends IEffect {
+    enum CaptureSizeRange : int32_t {
+        MAX = 1024,  // maximum capture size in samples
+        MIN = 128    // minimum capture size in samples
+    };
+
+    /**
+     * Sets the number PCM samples in the capture.
+     */
+    setCaptureSize(uint16_t captureSize) generates (Result retval);
+
+    /**
+     * Gets the number PCM samples in the capture.
+     */
+    getCaptureSize() generates (Result retval, uint16_t captureSize);
+
+    enum ScalingMode : int32_t {
+        // Keep in sync with SCALING_MODE_... in
+        // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+        NORMALIZED = 0,
+        AS_PLAYED = 1
+    };
+
+    /**
+     * Specifies the way the captured data is scaled.
+     */
+    setScalingMode(ScalingMode scalingMode) generates (Result retval);
+
+    /**
+     * Retrieves the way the captured data is scaled.
+     */
+    getScalingMode() generates (Result retval, ScalingMode scalingMode);
+
+    /**
+     * Informs the visualizer about the downstream latency.
+     */
+    setLatency(uint32_t latencyMs) generates (Result retval);
+
+    /**
+     * Gets the downstream latency.
+     */
+    getLatency() generates (Result retval, uint32_t latencyMs);
+
+    enum MeasurementMode : int32_t {
+        // Keep in sync with MEASUREMENT_MODE_... in
+        // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+        NONE = 0x0,
+        PEAK_RMS = 0x1
+    };
+
+    /**
+     * Specifies which measurements are to be made.
+     */
+    setMeasurementMode(MeasurementMode measurementMode)
+            generates (Result retval);
+
+    /**
+     * Retrieves which measurements are to be made.
+     */
+    getMeasurementMode() generates (
+            Result retval, MeasurementMode measurementMode);
+
+    /**
+     * Retrieves the latest PCM snapshot captured by the visualizer engine.  The
+     * number of samples to capture is specified by 'setCaptureSize' parameter.
+     *
+     * @return retval operation completion status.
+     * @return samples samples in 8 bit unsigned format (0 = 0x80)
+     */
+    capture() generates (Result retval, vec<uint8_t> samples);
+
+    struct Measurement {
+        MeasurementMode mode;    // discriminator
+        union Values {
+            struct PeakAndRms {
+                int32_t peakMb;  // millibels
+                int32_t rmsMb;   // millibels
+            } peakAndRms;
+        } value;
+    };
+    /**
+     * Retrieves the latest measurements. The measurements to be made
+     * are specified by 'setMeasurementMode' parameter.
+     *
+     * @return retval operation completion status.
+     * @return result measurement.
+     */
+    measure() generates (Result retval, Measurement result);
+};
diff --git a/audio/effect/7.0/types.hal b/audio/effect/7.0/types.hal
new file mode 100644
index 0000000..fe4ee51
--- /dev/null
+++ b/audio/effect/7.0/types.hal
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@7.0;
+
+import android.hardware.audio.common@7.0;
+
+enum Result : int32_t {
+    OK,
+    NOT_INITIALIZED,
+    INVALID_ARGUMENTS,
+    INVALID_STATE,
+    NOT_SUPPORTED,
+    RESULT_TOO_BIG
+};
+
+/**
+ * Effect engine capabilities/requirements flags.
+ *
+ * Definitions for flags field of effect descriptor.
+ *
+ * +----------------+--------+--------------------------------------------------
+ * | description    | bits   | values
+ * +----------------+--------+--------------------------------------------------
+ * | connection     | 0..2   | 0 insert: after track process
+ * | mode           |        | 1 auxiliary: connect to track auxiliary
+ * |                |        |  output and use send level
+ * |                |        | 2 replace: replaces track process function;
+ * |                |        |   must implement SRC, volume and mono to stereo.
+ * |                |        | 3 pre processing: applied below audio HAL on in
+ * |                |        | 4 post processing: applied below audio HAL on out
+ * |                |        | 5 - 7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | insertion      | 3..5   | 0 none
+ * | preference     |        | 1 first of the chain
+ * |                |        | 2 last of the chain
+ * |                |        | 3 exclusive (only effect in the insert chain)
+ * |                |        | 4..7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Volume         | 6..8   | 0 none
+ * | management     |        | 1 implements volume control
+ * |                |        | 2 requires volume indication
+ * |                |        | 3 monitors requested volume
+ * |                |        | 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Device         | 9..11  | 0 none
+ * | indication     |        | 1 requires device updates
+ * |                |        | 2, 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Sample input   | 12..13 | 1 direct: process() function or
+ * | mode           |        |   EFFECT_CMD_SET_CONFIG command must specify
+ * |                |        |   a buffer descriptor
+ * |                |        | 2 provider: process() function uses the
+ * |                |        |   bufferProvider indicated by the
+ * |                |        |   EFFECT_CMD_SET_CONFIG command to request input.
+ * |                |        |   buffers.
+ * |                |        | 3 both: both input modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Sample output  | 14..15 | 1 direct: process() function or
+ * | mode           |        |   EFFECT_CMD_SET_CONFIG command must specify
+ * |                |        |   a buffer descriptor
+ * |                |        | 2 provider: process() function uses the
+ * |                |        |   bufferProvider indicated by the
+ * |                |        |   EFFECT_CMD_SET_CONFIG command to request output
+ * |                |        |   buffers.
+ * |                |        | 3 both: both output modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Hardware       | 16..17 | 0 No hardware acceleration
+ * | acceleration   |        | 1 non tunneled hw acceleration: the process()
+ * |                |        |   function reads the samples, send them to HW
+ * |                |        |   accelerated effect processor, reads back
+ * |                |        |   the processed samples and returns them
+ * |                |        |   to the output buffer.
+ * |                |        | 2 tunneled hw acceleration: the process()
+ * |                |        |   function is transparent. The effect interface
+ * |                |        |   is only used to control the effect engine.
+ * |                |        |   This mode is relevant for global effects
+ * |                |        |   actually applied by the audio hardware on
+ * |                |        |   the output stream.
+ * +----------------+--------+--------------------------------------------------
+ * | Audio Mode     | 18..19 | 0 none
+ * | indication     |        | 1 requires audio mode updates
+ * |                |        | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Audio source   | 20..21 | 0 none
+ * | indication     |        | 1 requires audio source updates
+ * |                |        | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Effect offload | 22     | 0 The effect cannot be offloaded to an audio DSP
+ * | supported      |        | 1 The effect can be offloaded to an audio DSP
+ * +----------------+--------+--------------------------------------------------
+ * | Process        | 23     | 0 The effect implements a process function.
+ * | function       |        | 1 The effect does not implement a process
+ * | not            |        |   function: enabling the effect has no impact
+ * | implemented    |        |   on latency or CPU load.
+ * |                |        |   Effect implementations setting this flag do not
+ * |                |        |   have to implement a process function.
+ * +----------------+--------+--------------------------------------------------
+ */
+@export(name="", value_prefix="EFFECT_FLAG_")
+enum EffectFlags : int32_t {
+    // Insert mode
+    TYPE_SHIFT = 0,
+    TYPE_SIZE = 3,
+    TYPE_MASK = ((1 << TYPE_SIZE) -1) << TYPE_SHIFT,
+    TYPE_INSERT = 0 << TYPE_SHIFT,
+    TYPE_AUXILIARY = 1 << TYPE_SHIFT,
+    TYPE_REPLACE = 2 << TYPE_SHIFT,
+    TYPE_PRE_PROC = 3 << TYPE_SHIFT,
+    TYPE_POST_PROC = 4 << TYPE_SHIFT,
+
+    // Insert preference
+    INSERT_SHIFT = TYPE_SHIFT + TYPE_SIZE,
+    INSERT_SIZE = 3,
+    INSERT_MASK = ((1 << INSERT_SIZE) -1) << INSERT_SHIFT,
+    INSERT_ANY = 0 << INSERT_SHIFT,
+    INSERT_FIRST = 1 << INSERT_SHIFT,
+    INSERT_LAST = 2 << INSERT_SHIFT,
+    INSERT_EXCLUSIVE = 3 << INSERT_SHIFT,
+
+    // Volume control
+    VOLUME_SHIFT = INSERT_SHIFT + INSERT_SIZE,
+    VOLUME_SIZE = 3,
+    VOLUME_MASK = ((1 << VOLUME_SIZE) -1) << VOLUME_SHIFT,
+    VOLUME_CTRL = 1 << VOLUME_SHIFT,
+    VOLUME_IND = 2 << VOLUME_SHIFT,
+    VOLUME_MONITOR = 3 << VOLUME_SHIFT,
+    VOLUME_NONE = 0 << VOLUME_SHIFT,
+
+    // Device indication
+    DEVICE_SHIFT = VOLUME_SHIFT + VOLUME_SIZE,
+    DEVICE_SIZE = 3,
+    DEVICE_MASK = ((1 << DEVICE_SIZE) -1) << DEVICE_SHIFT,
+    DEVICE_IND = 1 << DEVICE_SHIFT,
+    DEVICE_NONE = 0 << DEVICE_SHIFT,
+
+    // Sample input modes
+    INPUT_SHIFT = DEVICE_SHIFT + DEVICE_SIZE,
+    INPUT_SIZE = 2,
+    INPUT_MASK = ((1 << INPUT_SIZE) -1) << INPUT_SHIFT,
+    INPUT_DIRECT = 1 << INPUT_SHIFT,
+    INPUT_PROVIDER = 2 << INPUT_SHIFT,
+    INPUT_BOTH = 3 << INPUT_SHIFT,
+
+    // Sample output modes
+    OUTPUT_SHIFT = INPUT_SHIFT + INPUT_SIZE,
+    OUTPUT_SIZE = 2,
+    OUTPUT_MASK = ((1 << OUTPUT_SIZE) -1) << OUTPUT_SHIFT,
+    OUTPUT_DIRECT = 1 << OUTPUT_SHIFT,
+    OUTPUT_PROVIDER = 2 << OUTPUT_SHIFT,
+    OUTPUT_BOTH = 3 << OUTPUT_SHIFT,
+
+    // Hardware acceleration mode
+    HW_ACC_SHIFT = OUTPUT_SHIFT + OUTPUT_SIZE,
+    HW_ACC_SIZE = 2,
+    HW_ACC_MASK = ((1 << HW_ACC_SIZE) -1) << HW_ACC_SHIFT,
+    HW_ACC_SIMPLE = 1 << HW_ACC_SHIFT,
+    HW_ACC_TUNNEL = 2 << HW_ACC_SHIFT,
+
+    // Audio mode indication
+    AUDIO_MODE_SHIFT = HW_ACC_SHIFT + HW_ACC_SIZE,
+    AUDIO_MODE_SIZE = 2,
+    AUDIO_MODE_MASK = ((1 << AUDIO_MODE_SIZE) -1) << AUDIO_MODE_SHIFT,
+    AUDIO_MODE_IND = 1 << AUDIO_MODE_SHIFT,
+    AUDIO_MODE_NONE = 0 << AUDIO_MODE_SHIFT,
+
+    // Audio source indication
+    AUDIO_SOURCE_SHIFT = AUDIO_MODE_SHIFT + AUDIO_MODE_SIZE,
+    AUDIO_SOURCE_SIZE = 2,
+    AUDIO_SOURCE_MASK = ((1 << AUDIO_SOURCE_SIZE) -1) << AUDIO_SOURCE_SHIFT,
+    AUDIO_SOURCE_IND = 1 << AUDIO_SOURCE_SHIFT,
+    AUDIO_SOURCE_NONE = 0 << AUDIO_SOURCE_SHIFT,
+
+    // Effect offload indication
+    OFFLOAD_SHIFT = AUDIO_SOURCE_SHIFT + AUDIO_SOURCE_SIZE,
+    OFFLOAD_SIZE = 1,
+    OFFLOAD_MASK = ((1 << OFFLOAD_SIZE) -1) << OFFLOAD_SHIFT,
+    OFFLOAD_SUPPORTED = 1 << OFFLOAD_SHIFT,
+
+    // Effect has no process indication
+    NO_PROCESS_SHIFT = OFFLOAD_SHIFT + OFFLOAD_SIZE,
+    NO_PROCESS_SIZE = 1,
+    NO_PROCESS_MASK = ((1 << NO_PROCESS_SIZE) -1) << NO_PROCESS_SHIFT,
+    NO_PROCESS = 1 << NO_PROCESS_SHIFT
+};
+
+/**
+ * The effect descriptor contains necessary information to facilitate the
+ * enumeration of the effect engines present in a library.
+ */
+struct EffectDescriptor {
+    Uuid type;                   // UUID of to the OpenSL ES interface implemented
+                                 // by this effect
+    Uuid uuid;                   // UUID for this particular implementation
+    bitfield<EffectFlags> flags; // effect engine capabilities/requirements flags
+    uint16_t cpuLoad;            // CPU load indication expressed in 0.1 MIPS units
+                                 // as estimated on an ARM9E core (ARMv5TE) with 0 WS
+    uint16_t memoryUsage;        // data memory usage expressed in KB and includes
+                                 // only dynamically allocated memory
+    uint8_t[64] name;            // human readable effect name
+    uint8_t[64] implementor;     // human readable effect implementor name
+};
+
+/**
+ * A buffer is a chunk of audio data for processing.  Multi-channel audio is
+ * always interleaved. The channel order is from LSB to MSB with regard to the
+ * channel mask definition in audio.h, audio_channel_mask_t, e.g.:
+ * Stereo: L, R; 5.1: FL, FR, FC, LFE, BL, BR.
+ *
+ * The buffer size is expressed in frame count, a frame being composed of
+ * samples for all channels at a given time. Frame size for unspecified format
+ * (AUDIO_FORMAT_OTHER) is 8 bit by definition.
+ */
+struct AudioBuffer {
+    uint64_t id;
+    uint32_t frameCount;
+    memory data;
+};
+
+@export(name="effect_buffer_access_e", value_prefix="EFFECT_BUFFER_")
+enum EffectBufferAccess : int32_t {
+    ACCESS_WRITE,
+    ACCESS_READ,
+    ACCESS_ACCUMULATE
+};
+
+/**
+ * Determines what fields of EffectBufferConfig need to be considered.
+ */
+@export(name="", value_prefix="EFFECT_CONFIG_")
+enum EffectConfigParameters : int32_t {
+    BUFFER = 0x0001,    // buffer field
+    SMP_RATE = 0x0002,  // samplingRate
+    CHANNELS = 0x0004,  // channels
+    FORMAT = 0x0008,    // format
+    ACC_MODE = 0x0010,  // accessMode
+    // Note that the 2.0 ALL have been moved to an helper function
+};
+
+/**
+ * The buffer config structure specifies the input or output audio format
+ * to be used by the effect engine.
+ */
+struct EffectBufferConfig {
+    AudioBuffer buffer;
+    uint32_t samplingRateHz;
+    AudioChannelMask channels;
+    AudioFormat format;
+    EffectBufferAccess accessMode;
+    bitfield<EffectConfigParameters> mask;
+};
+
+struct EffectConfig {
+    EffectBufferConfig inputCfg;
+    EffectBufferConfig outputCfg;
+};
+
+@export(name="effect_feature_e", value_prefix="EFFECT_FEATURE_")
+enum EffectFeature : int32_t {
+    AUX_CHANNELS, // supports auxiliary channels
+                  // (e.g. dual mic noise suppressor)
+    CNT
+};
+
+struct EffectAuxChannelsConfig {
+    vec<AudioChannelMask> mainChannels;  // channel mask for main channels
+    vec<AudioChannelMask> auxChannels;   // channel mask for auxiliary channels
+};
+
+struct EffectOffloadParameter {
+    bool isOffload;          // true if the playback thread the effect
+                             // is attached to is offloaded
+    AudioIoHandle ioHandle;  // io handle of the playback thread
+                             // the effect is attached to
+};
+
+/**
+ * The message queue flags used to synchronize reads and writes from
+ * the status message queue used by effects.
+ */
+enum MessageQueueFlagBits : uint32_t {
+    DONE_PROCESSING = 1 << 0,
+    REQUEST_PROCESS = 1 << 1,
+    REQUEST_PROCESS_REVERSE = 1 << 2,
+    REQUEST_QUIT = 1 << 3,
+    REQUEST_PROCESS_ALL =
+        REQUEST_PROCESS | REQUEST_PROCESS_REVERSE | REQUEST_QUIT
+};
diff --git a/audio/effect/7.0/xml/Android.bp b/audio/effect/7.0/xml/Android.bp
new file mode 100644
index 0000000..dc12e63
--- /dev/null
+++ b/audio/effect/7.0/xml/Android.bp
@@ -0,0 +1,5 @@
+xsd_config {
+    name: "audio_effects_conf_V7_0",
+    srcs: ["audio_effects_conf.xsd"],
+    package_name: "audio.effects.V7_0",
+}
diff --git a/audio/effect/7.0/xml/api/current.txt b/audio/effect/7.0/xml/api/current.txt
new file mode 100644
index 0000000..34cb541
--- /dev/null
+++ b/audio/effect/7.0/xml/api/current.txt
@@ -0,0 +1,208 @@
+// Signature format: 2.0
+package audio.effects.V7_0 {
+
+  public class AudioEffectsConf {
+    ctor public AudioEffectsConf();
+    method public audio.effects.V7_0.AudioEffectsConf.DeviceEffects getDeviceEffects();
+    method public audio.effects.V7_0.EffectsType getEffects();
+    method public audio.effects.V7_0.LibrariesType getLibraries();
+    method public audio.effects.V7_0.AudioEffectsConf.Postprocess getPostprocess();
+    method public audio.effects.V7_0.AudioEffectsConf.Preprocess getPreprocess();
+    method public audio.effects.V7_0.VersionType getVersion();
+    method public void setDeviceEffects(audio.effects.V7_0.AudioEffectsConf.DeviceEffects);
+    method public void setEffects(audio.effects.V7_0.EffectsType);
+    method public void setLibraries(audio.effects.V7_0.LibrariesType);
+    method public void setPostprocess(audio.effects.V7_0.AudioEffectsConf.Postprocess);
+    method public void setPreprocess(audio.effects.V7_0.AudioEffectsConf.Preprocess);
+    method public void setVersion(audio.effects.V7_0.VersionType);
+  }
+
+  public static class AudioEffectsConf.DeviceEffects {
+    ctor public AudioEffectsConf.DeviceEffects();
+    method public java.util.List<audio.effects.V7_0.DeviceProcessType> getDevicePort();
+  }
+
+  public static class AudioEffectsConf.Postprocess {
+    ctor public AudioEffectsConf.Postprocess();
+    method public java.util.List<audio.effects.V7_0.StreamPostprocessType> getStream();
+  }
+
+  public static class AudioEffectsConf.Preprocess {
+    ctor public AudioEffectsConf.Preprocess();
+    method public java.util.List<audio.effects.V7_0.StreamPreprocessType> getStream();
+  }
+
+  public class DeviceProcessType extends audio.effects.V7_0.StreamProcessingType {
+    ctor public DeviceProcessType();
+    method public String getAddress();
+    method public audio.effects.V7_0.DeviceType getType();
+    method public void setAddress(String);
+    method public void setType(audio.effects.V7_0.DeviceType);
+  }
+
+  public enum DeviceType {
+    method public String getRawName();
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_AUX_DIGITAL;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_BACK_MIC;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_BLUETOOTH_A2DP;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_BLUETOOTH_BLE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_BUILTIN_MIC;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_BUS;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_COMMUNICATION;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_ECHO_REFERENCE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_FM_TUNER;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_HDMI;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_HDMI_ARC;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_IP;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_LINE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_LOOPBACK;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_PROXY;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_REMOTE_SUBMIX;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_SPDIF;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_TELEPHONY_RX;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_TV_TUNER;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_USB_ACCESSORY;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_USB_DEVICE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_USB_HEADSET;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_VOICE_CALL;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_IN_WIRED_HEADSET;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_AUX_DIGITAL;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_AUX_LINE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_BLUETOOTH_A2DP;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_BLUETOOTH_SCO;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_BUS;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_EARPIECE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_ECHO_CANCELLER;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_FM;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_HDMI;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_HDMI_ARC;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_HEARING_AID;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_IP;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_LINE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_PROXY;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_REMOTE_SUBMIX;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_SPDIF;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_SPEAKER;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_SPEAKER_SAFE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_TELEPHONY_TX;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_USB_ACCESSORY;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_USB_DEVICE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_USB_HEADSET;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_WIRED_HEADPHONE;
+    enum_constant public static final audio.effects.V7_0.DeviceType AUDIO_DEVICE_OUT_WIRED_HEADSET;
+  }
+
+  public class EffectImplType {
+    ctor public EffectImplType();
+    method public String getLibrary();
+    method public String getUuid();
+    method public void setLibrary(String);
+    method public void setUuid(String);
+  }
+
+  public class EffectProxyType extends audio.effects.V7_0.EffectType {
+    ctor public EffectProxyType();
+    method public audio.effects.V7_0.EffectImplType getLibhw();
+    method public audio.effects.V7_0.EffectImplType getLibsw();
+    method public void setLibhw(audio.effects.V7_0.EffectImplType);
+    method public void setLibsw(audio.effects.V7_0.EffectImplType);
+  }
+
+  public class EffectType extends audio.effects.V7_0.EffectImplType {
+    ctor public EffectType();
+    method public String getName();
+    method public void setName(String);
+  }
+
+  public class EffectsType {
+    ctor public EffectsType();
+    method public java.util.List<audio.effects.V7_0.EffectProxyType> getEffectProxy_optional();
+    method public java.util.List<audio.effects.V7_0.EffectType> getEffect_optional();
+  }
+
+  public class LibrariesType {
+    ctor public LibrariesType();
+    method public java.util.List<audio.effects.V7_0.LibrariesType.Library> getLibrary();
+  }
+
+  public static class LibrariesType.Library {
+    ctor public LibrariesType.Library();
+    method public String getName();
+    method public String getPath();
+    method public void setName(String);
+    method public void setPath(String);
+  }
+
+  public enum StreamInputType {
+    method public String getRawName();
+    enum_constant public static final audio.effects.V7_0.StreamInputType camcorder;
+    enum_constant public static final audio.effects.V7_0.StreamInputType echo_reference;
+    enum_constant public static final audio.effects.V7_0.StreamInputType fm_tuner;
+    enum_constant public static final audio.effects.V7_0.StreamInputType mic;
+    enum_constant public static final audio.effects.V7_0.StreamInputType unprocessed;
+    enum_constant public static final audio.effects.V7_0.StreamInputType voice_call;
+    enum_constant public static final audio.effects.V7_0.StreamInputType voice_communication;
+    enum_constant public static final audio.effects.V7_0.StreamInputType voice_downlink;
+    enum_constant public static final audio.effects.V7_0.StreamInputType voice_performance;
+    enum_constant public static final audio.effects.V7_0.StreamInputType voice_recognition;
+    enum_constant public static final audio.effects.V7_0.StreamInputType voice_uplink;
+  }
+
+  public enum StreamOutputType {
+    method public String getRawName();
+    enum_constant public static final audio.effects.V7_0.StreamOutputType alarm;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType assistant;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType bluetooth_sco;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType dtmf;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType enforced_audible;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType music;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType notification;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType ring;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType system;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType tts;
+    enum_constant public static final audio.effects.V7_0.StreamOutputType voice_call;
+  }
+
+  public class StreamPostprocessType extends audio.effects.V7_0.StreamProcessingType {
+    ctor public StreamPostprocessType();
+    method public audio.effects.V7_0.StreamOutputType getType();
+    method public void setType(audio.effects.V7_0.StreamOutputType);
+  }
+
+  public class StreamPreprocessType extends audio.effects.V7_0.StreamProcessingType {
+    ctor public StreamPreprocessType();
+    method public audio.effects.V7_0.StreamInputType getType();
+    method public void setType(audio.effects.V7_0.StreamInputType);
+  }
+
+  public class StreamProcessingType {
+    ctor public StreamProcessingType();
+    method public java.util.List<audio.effects.V7_0.StreamProcessingType.Apply> getApply();
+  }
+
+  public static class StreamProcessingType.Apply {
+    ctor public StreamProcessingType.Apply();
+    method public String getEffect();
+    method public void setEffect(String);
+  }
+
+  public enum VersionType {
+    method public String getRawName();
+    enum_constant public static final audio.effects.V7_0.VersionType _2_0;
+  }
+
+  public class XmlParser {
+    ctor public XmlParser();
+    method public static audio.effects.V7_0.AudioEffectsConf read(java.io.InputStream) throws javax.xml.datatype.DatatypeConfigurationException, java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static String readText(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static void skip(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+  }
+
+}
+
diff --git a/audio/effect/7.0/xml/api/last_current.txt b/audio/effect/7.0/xml/api/last_current.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/effect/7.0/xml/api/last_current.txt
diff --git a/audio/effect/7.0/xml/api/last_removed.txt b/audio/effect/7.0/xml/api/last_removed.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/effect/7.0/xml/api/last_removed.txt
diff --git a/audio/effect/7.0/xml/api/removed.txt b/audio/effect/7.0/xml/api/removed.txt
new file mode 100644
index 0000000..d802177
--- /dev/null
+++ b/audio/effect/7.0/xml/api/removed.txt
@@ -0,0 +1 @@
+// Signature format: 2.0
diff --git a/audio/effect/7.0/xml/audio_effects_conf.xsd b/audio/effect/7.0/xml/audio_effects_conf.xsd
new file mode 100644
index 0000000..94f9f76
--- /dev/null
+++ b/audio/effect/7.0/xml/audio_effects_conf.xsd
@@ -0,0 +1,323 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
+           targetNamespace="http://schemas.android.com/audio/audio_effects_conf/v2_0"
+           xmlns:aec="http://schemas.android.com/audio/audio_effects_conf/v2_0"
+           elementFormDefault="qualified">
+  <!-- Simple types -->
+  <xs:simpleType name="versionType">
+    <xs:restriction base="xs:decimal">
+      <xs:enumeration value="2.0"/>
+    </xs:restriction>
+  </xs:simpleType>
+  <xs:simpleType name="uuidType">
+    <xs:restriction base="xs:string">
+      <xs:pattern value="[0-9A-Fa-f]{8}-[0-9A-Fa-f]{4}-[0-9A-Fa-f]{4}-[0-9A-Fa-f]{4}-[0-9A-Fa-f]{12}"/>
+    </xs:restriction>
+  </xs:simpleType>
+  <xs:simpleType name="streamInputType">
+    <xs:restriction base="xs:string">
+      <xs:enumeration value="mic"/>
+      <xs:enumeration value="voice_uplink"/>
+      <xs:enumeration value="voice_downlink"/>
+      <xs:enumeration value="voice_call"/>
+      <xs:enumeration value="camcorder"/>
+      <xs:enumeration value="voice_recognition"/>
+      <xs:enumeration value="voice_communication"/>
+      <xs:enumeration value="unprocessed"/>
+      <xs:enumeration value="voice_performance"/>
+      <xs:enumeration value="echo_reference"/>
+      <xs:enumeration value="fm_tuner"/>
+    </xs:restriction>
+  </xs:simpleType>
+  <xs:simpleType name="streamOutputType">
+    <xs:restriction base="xs:string">
+      <xs:enumeration value="voice_call"/>
+      <xs:enumeration value="system"/>
+      <xs:enumeration value="ring"/>
+      <xs:enumeration value="music"/>
+      <xs:enumeration value="alarm"/>
+      <xs:enumeration value="notification"/>
+      <xs:enumeration value="bluetooth_sco"/>
+      <xs:enumeration value="enforced_audible"/>
+      <xs:enumeration value="dtmf"/>
+      <xs:enumeration value="tts"/>
+      <xs:enumeration value="assistant"/>
+    </xs:restriction>
+  </xs:simpleType>
+  <xs:simpleType name="relativePathType">
+    <xs:restriction base="xs:string">
+      <xs:pattern value="[^/].*"/>
+    </xs:restriction>
+  </xs:simpleType>
+  <xs:simpleType name="deviceType">
+    <xs:restriction base="xs:string">
+      <xs:enumeration value="AUDIO_DEVICE_OUT_EARPIECE"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADSET"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADPHONE"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_DIGITAL"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_USB_ACCESSORY"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_USB_DEVICE"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_REMOTE_SUBMIX"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_TELEPHONY_TX"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_LINE"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI_ARC"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_SPDIF"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_FM"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_LINE"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER_SAFE"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_IP"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_BUS"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_PROXY"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_USB_HEADSET"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_HEARING_AID"/>
+      <xs:enumeration value="AUDIO_DEVICE_OUT_ECHO_CANCELLER"/>
+      <!-- Due to the xml format, IN types can not be a separated from OUT types -->
+      <xs:enumeration value="AUDIO_DEVICE_IN_COMMUNICATION"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_BUILTIN_MIC"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_WIRED_HEADSET"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_AUX_DIGITAL"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_HDMI"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_VOICE_CALL"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_TELEPHONY_RX"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_BACK_MIC"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_REMOTE_SUBMIX"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_USB_ACCESSORY"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_USB_DEVICE"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_FM_TUNER"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_TV_TUNER"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_LINE"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_SPDIF"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_A2DP"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_LOOPBACK"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_IP"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_BUS"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_PROXY"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_USB_HEADSET"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_BLE"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_HDMI_ARC"/>
+      <xs:enumeration value="AUDIO_DEVICE_IN_ECHO_REFERENCE"/>
+    </xs:restriction>
+  </xs:simpleType>
+  <!-- Complex types -->
+  <xs:complexType name="librariesType">
+    <xs:annotation>
+      <xs:documentation xml:lang="en">
+        List of effect libraries to load. Each library element must have "name" and
+        "path" attributes. The latter is giving the path of the library .so file
+        relative to the standard effect folders: /(vendor|odm|system)/lib(64)?/soundfx/
+        Example for a library in "/vendor/lib/soundfx/lib.so":
+        <library name="name" path="lib.so"/>
+      </xs:documentation>
+    </xs:annotation>
+    <xs:sequence>
+      <xs:element name="library" minOccurs="0" maxOccurs="unbounded">
+        <xs:complexType>
+          <xs:attribute name="name" type="xs:string" use="required"/>
+          <xs:attribute name="path" type="aec:relativePathType" use="required"/>
+        </xs:complexType>
+      </xs:element>
+    </xs:sequence>
+  </xs:complexType>
+  <xs:complexType name="effectImplType">
+    <xs:attribute name="library" type="xs:string" use="required"/>
+    <xs:attribute name="uuid" type="aec:uuidType" use="required"/>
+  </xs:complexType>
+  <xs:complexType name="effectType">
+    <xs:complexContent>
+      <xs:extension base="aec:effectImplType">
+        <xs:attribute name="name" type="xs:string" use="required"/>
+      </xs:extension>
+    </xs:complexContent>
+  </xs:complexType>
+  <xs:complexType name="effectProxyType">
+    <xs:complexContent>
+      <xs:extension base="aec:effectType">
+        <xs:sequence>
+          <xs:element name="libsw" type="aec:effectImplType"/>
+          <xs:element name="libhw" type="aec:effectImplType"/>
+        </xs:sequence>
+      </xs:extension>
+    </xs:complexContent>
+  </xs:complexType>
+  <xs:complexType name="effectsType">
+    <xs:annotation>
+      <xs:documentation xml:lang="en">
+        List of effects to load. Each effect element must contain "name",
+        "library", and "uuid" attrs. The value of the "library" attr must
+        correspond to the name of a "library" element. The name of the effect
+        element is indicative, only the value of the "uuid" element designates
+        the effect for the audio framework.  The uuid is the implementation
+        specific UUID as specified by the effect vendor. This is not the generic
+        effect type UUID.
+        For effect proxy implementations, SW and HW implementations of the effect
+        can be specified.
+        Example:
+        <effect name="name" library="lib" uuid="uuuu"/>
+        <effectProxy name="proxied" library="proxy" uuid="xxxx">
+            <libsw library="sw_bundle" uuid="yyyy"/>
+            <libhw library="offload_bundle" uuid="zzzz"/>
+        </effectProxy>
+      </xs:documentation>
+    </xs:annotation>
+    <xs:choice maxOccurs="unbounded">
+      <xs:element name="effect" type="aec:effectType" minOccurs="0" maxOccurs="unbounded"/>
+      <xs:element name="effectProxy" type="aec:effectProxyType" minOccurs="0" maxOccurs="unbounded"/>
+    </xs:choice>
+  </xs:complexType>
+  <xs:complexType name="streamProcessingType">
+    <xs:sequence>
+      <xs:element name="apply" minOccurs="0" maxOccurs="unbounded">
+        <xs:complexType>
+          <xs:attribute name="effect" type="xs:string" use="required"/>
+        </xs:complexType>
+      </xs:element>
+    </xs:sequence>
+  </xs:complexType>
+  <xs:complexType name="streamPreprocessType">
+    <xs:annotation>
+      <xs:documentation xml:lang="en">
+        Audio preprocessing configuration. The processing configuration consists
+        of a list of elements each describing processing settings for a given
+        input stream. Valid input stream types are listed in "streamInputType".
+        Each stream element contains a list of "apply" elements. The value of the
+        "effect" attr must correspond to the name of an "effect" element.
+        Example:
+        <stream type="voice_communication">
+            <apply effect="effect1"/>
+            <apply effect="effect2"/>
+        </stream>
+      </xs:documentation>
+    </xs:annotation>
+    <xs:complexContent>
+      <xs:extension base="aec:streamProcessingType">
+        <xs:attribute name="type" type="aec:streamInputType" use="required"/>
+      </xs:extension>
+    </xs:complexContent>
+  </xs:complexType>
+  <xs:complexType name="streamPostprocessType">
+    <xs:annotation>
+      <xs:documentation xml:lang="en">
+        Audio postprocessing configuration. The processing configuration consists
+        of a list of elements each describing processing settings for a given
+        output stream. Valid output stream types are listed in "streamOutputType".
+        Each stream element contains a list of "apply" elements. The value of the
+        "effect" attr must correspond to the name of an "effect" element.
+        Example:
+        <stream type="music">
+            <apply effect="effect1"/>
+        </stream>
+      </xs:documentation>
+    </xs:annotation>
+    <xs:complexContent>
+      <xs:extension base="aec:streamProcessingType">
+        <xs:attribute name="type" type="aec:streamOutputType" use="required"/>
+      </xs:extension>
+    </xs:complexContent>
+  </xs:complexType>
+  <xs:complexType name="deviceProcessType">
+    <xs:annotation>
+      <xs:documentation xml:lang="en">
+        Audio Device Effects configuration. The processing configuration consists
+        of a list of effects to be automatically added on a device Port when involved in an audio
+        patch.
+        Valid device type are listed in "deviceType" and shall be aligned.
+        Each stream element contains a list of "apply" elements. The value of the
+        "effect" attr must correspond to the name of an "effect" element.
+        Note that if the device is involved in a hardware patch, the effect must be hardware
+        accelerated.
+        Example:
+        <devicePort address="BUS00_USAGE_MAIN" type="AUDIO_DEVICE_OUT_BUS">
+            <apply effect="equalizer"/>
+            <apply effect="effect2"/>
+        </devicePort>
+      </xs:documentation>
+    </xs:annotation>
+    <xs:complexContent>
+      <xs:extension base="aec:streamProcessingType">
+         <xs:attribute name="address" type="xs:string" use="required"/>
+         <xs:attribute name="type" type="aec:deviceType" use="required"/>
+      </xs:extension>
+    </xs:complexContent>
+  </xs:complexType>
+  <!-- Root element -->
+  <xs:element name="audio_effects_conf">
+    <xs:complexType>
+      <xs:sequence>
+        <xs:element name="libraries" type="aec:librariesType"/>
+        <xs:element name="effects" type="aec:effectsType"/>
+        <xs:element name="postprocess" minOccurs="0" maxOccurs="1">
+          <xs:complexType>
+            <xs:sequence>
+              <xs:element name="stream" type="aec:streamPostprocessType" minOccurs="0" maxOccurs="unbounded"/>
+            </xs:sequence>
+          </xs:complexType>
+        </xs:element>
+        <xs:element name="preprocess" minOccurs="0" maxOccurs="1">
+          <xs:complexType>
+            <xs:sequence>
+              <xs:element name="stream" type="aec:streamPreprocessType" minOccurs="0" maxOccurs="unbounded"/>
+            </xs:sequence>
+          </xs:complexType>
+        </xs:element>
+        <xs:element name="deviceEffects" minOccurs="0" maxOccurs="1">
+          <xs:complexType>
+            <xs:sequence>
+              <xs:element name="devicePort" type="aec:deviceProcessType" minOccurs="0" maxOccurs="unbounded"/>
+            </xs:sequence>
+          </xs:complexType>
+        </xs:element>
+      </xs:sequence>
+      <xs:attribute name="version" type="aec:versionType" use="required"/>
+    </xs:complexType>
+    <!-- Keys and references -->
+    <xs:key name="libraryName">
+      <xs:selector xpath="aec:libraries/aec:library"/>
+      <xs:field xpath="@name"/>
+    </xs:key>
+    <xs:keyref name="libraryNameRef1" refer="aec:libraryName">
+      <xs:selector xpath="aec:effects/aec:effect"/>
+      <xs:field xpath="@library"/>
+    </xs:keyref>
+    <xs:keyref name="libraryNameRef2" refer="aec:libraryName">
+      <xs:selector xpath="aec:effects/aec:effect/aec:libsw"/>
+      <xs:field xpath="@library"/>
+    </xs:keyref>
+    <xs:keyref name="libraryNameRef3" refer="aec:libraryName">
+      <xs:selector xpath="aec:effects/aec:effect/aec:libhw"/>
+      <xs:field xpath="@library"/>
+    </xs:keyref>
+    <xs:key name="effectName">
+      <xs:selector xpath="aec:effects/aec:effect|aec:effects/aec:effectProxy"/>
+      <xs:field xpath="@name"/>
+    </xs:key>
+    <xs:keyref name="effectNamePreRef" refer="aec:effectName">
+      <xs:selector xpath="aec:preprocess/aec:stream/aec:apply"/>
+      <xs:field xpath="@effect"/>
+    </xs:keyref>
+    <xs:keyref name="effectNamePostRef" refer="aec:effectName">
+      <xs:selector xpath="aec:postprocess/aec:stream/aec:apply"/>
+      <xs:field xpath="@effect"/>
+    </xs:keyref>
+  </xs:element>
+</xs:schema>
diff --git a/audio/effect/all-versions/default/Android.bp b/audio/effect/all-versions/default/Android.bp
index d9bb78b..1c3dc74 100644
--- a/audio/effect/all-versions/default/Android.bp
+++ b/audio/effect/all-versions/default/Android.bp
@@ -56,7 +56,7 @@
         "-DMAJOR_VERSION=2",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_library_shared {
@@ -71,7 +71,7 @@
         "-DMAJOR_VERSION=4",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_library_shared {
@@ -86,7 +86,7 @@
         "-DMAJOR_VERSION=5",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_library_shared {
@@ -101,5 +101,21 @@
         "-DMAJOR_VERSION=6",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
+}
+
+cc_library_shared {
+    enabled: false,
+    name: "android.hardware.audio.effect@7.0-impl",
+    defaults: ["android.hardware.audio.effect-impl_default"],
+    shared_libs: [
+        "android.hardware.audio.common@7.0",
+        "android.hardware.audio.common@7.0-util",
+        "android.hardware.audio.effect@7.0",
+    ],
+    cflags: [
+        "-DMAJOR_VERSION=7",
+        "-DMINOR_VERSION=0",
+        "-include common/all-versions/VersionMacro.h",
+    ],
 }
diff --git a/audio/effect/all-versions/vts/functional/Android.bp b/audio/effect/all-versions/vts/functional/Android.bp
index 309aa9d..7cdb18f 100644
--- a/audio/effect/all-versions/vts/functional/Android.bp
+++ b/audio/effect/all-versions/vts/functional/Android.bp
@@ -19,7 +19,7 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: [
         "VtsHalAudioEffectTargetTest.cpp",
-        "ValidateAudioEffectsConfiguration.cpp"
+        "ValidateAudioEffectsConfiguration.cpp",
     ],
     static_libs: [
         "android.hardware.audio.common.test.utility",
@@ -31,7 +31,10 @@
     header_libs: [
         "android.hardware.audio.common.util@all-versions",
     ],
-    test_suites: ["general-tests", "vts"],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
 }
 
 cc_test {
@@ -51,7 +54,7 @@
         "-DMAJOR_VERSION=2",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_test {
@@ -71,7 +74,7 @@
         "-DMAJOR_VERSION=4",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_test {
@@ -91,7 +94,7 @@
         "-DMAJOR_VERSION=5",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
 }
 
 cc_test {
@@ -111,5 +114,26 @@
         "-DMAJOR_VERSION=6",
         "-DMINOR_VERSION=0",
         "-include common/all-versions/VersionMacro.h",
-    ]
+    ],
+}
+
+cc_test {
+    enabled: false,
+    name: "VtsHalAudioEffectV7_0TargetTest",
+    defaults: ["VtsHalAudioEffectTargetTest_default"],
+    // Use test_config for vts suite.
+    // TODO(b/146104851): Add auto-gen rules and remove it.
+    test_config: "VtsHalAudioEffectV7_0TargetTest.xml",
+    static_libs: [
+        "android.hardware.audio.common@7.0",
+        "android.hardware.audio.effect@7.0",
+    ],
+    data: [
+        ":audio_effects_conf_V7_0",
+    ],
+    cflags: [
+        "-DMAJOR_VERSION=7",
+        "-DMINOR_VERSION=0",
+        "-include common/all-versions/VersionMacro.h",
+    ],
 }
diff --git a/audio/effect/all-versions/vts/functional/VtsHalAudioEffectV7_0TargetTest.xml b/audio/effect/all-versions/vts/functional/VtsHalAudioEffectV7_0TargetTest.xml
new file mode 100644
index 0000000..e609756
--- /dev/null
+++ b/audio/effect/all-versions/vts/functional/VtsHalAudioEffectV7_0TargetTest.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Runs VtsHalAudioEffectV7_0TargetTest.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
+
+    <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer"/>
+    <target_preparer class="com.android.tradefed.targetprep.StopServicesSetup"/>
+
+    <target_preparer class="com.android.tradefed.targetprep.RunCommandTargetPreparer">
+        <option name="run-command" value="setprop vts.native_server.on 1"/>
+        <option name="teardown-command" value="setprop vts.native_server.on 0"/>
+    </target_preparer>
+
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="VtsHalAudioEffectV7_0TargetTest->/data/local/tmp/VtsHalAudioEffectV7_0TargetTest" />
+        <option name="push" value="audio_effects_conf_V7_0.xsd->/data/local/tmp/audio_effects_conf_V7_0.xsd" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="native-test-device-path" value="/data/local/tmp" />
+        <option name="module-name" value="VtsHalAudioEffectV7_0TargetTest" />
+    </test>
+</configuration>
diff --git a/automotive/vehicle/2.0/default/Android.bp b/automotive/vehicle/2.0/default/Android.bp
index d9ac239..9a0d89d 100644
--- a/automotive/vehicle/2.0/default/Android.bp
+++ b/automotive/vehicle/2.0/default/Android.bp
@@ -108,6 +108,9 @@
     srcs: [
         "impl/vhal_v2_0/EmulatedUserHal.cpp",
     ],
+    whole_static_libs: [
+        "android.hardware.automotive.vehicle@2.0-user-hal-helper-lib",
+    ],
 }
 
 // Vehicle HAL Server reference impl lib
@@ -143,6 +146,7 @@
     ],
     whole_static_libs: [
         "android.hardware.automotive.vehicle@2.0-server-common-lib",
+        "android.hardware.automotive.vehicle@2.0-user-hal-helper-lib",
     ],
     static_libs: [
         "android.hardware.automotive.vehicle@2.0-libproto-native",
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedUserHal.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedUserHal.cpp
index a5c2930..3bdf5a8 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedUserHal.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/EmulatedUserHal.cpp
@@ -15,10 +15,12 @@
  */
 #define LOG_TAG "EmulatedUserHal"
 
+#include "EmulatedUserHal.h"
+
 #include <cutils/log.h>
 #include <utils/SystemClock.h>
 
-#include "EmulatedUserHal.h"
+#include "UserHalHelper.h"
 
 namespace android {
 namespace hardware {
@@ -28,12 +30,35 @@
 
 namespace impl {
 
-constexpr int INITIAL_USER_INFO = static_cast<int>(VehicleProperty::INITIAL_USER_INFO);
-constexpr int SWITCH_USER = static_cast<int>(VehicleProperty::SWITCH_USER);
-constexpr int CREATE_USER = static_cast<int>(VehicleProperty::CREATE_USER);
-constexpr int REMOVE_USER = static_cast<int>(VehicleProperty::REMOVE_USER);
-constexpr int USER_IDENTIFICATION_ASSOCIATION =
-        static_cast<int>(VehicleProperty::USER_IDENTIFICATION_ASSOCIATION);
+namespace {
+
+using android::base::Error;
+using android::base::Result;
+
+constexpr int32_t INITIAL_USER_INFO = static_cast<int32_t>(VehicleProperty::INITIAL_USER_INFO);
+constexpr int32_t SWITCH_USER = static_cast<int32_t>(VehicleProperty::SWITCH_USER);
+constexpr int32_t CREATE_USER = static_cast<int32_t>(VehicleProperty::CREATE_USER);
+constexpr int32_t REMOVE_USER = static_cast<int32_t>(VehicleProperty::REMOVE_USER);
+constexpr int32_t USER_IDENTIFICATION_ASSOCIATION =
+        static_cast<int32_t>(VehicleProperty::USER_IDENTIFICATION_ASSOCIATION);
+
+Result<int32_t> getRequestId(const VehiclePropValue& value) {
+    if (value.value.int32Values.size() < 1) {
+        return Error(static_cast<int>(StatusCode::INVALID_ARG))
+               << "no int32values on " << toString(value);
+    }
+    return value.value.int32Values[0];
+}
+
+Result<SwitchUserMessageType> getSwitchUserMessageType(const VehiclePropValue& value) {
+    if (value.value.int32Values.size() < 2) {
+        return Error(static_cast<int>(StatusCode::INVALID_ARG))
+               << "missing switch user message type " << toString(value);
+    }
+    return user_hal_helper::verifyAndCast<SwitchUserMessageType>(value.value.int32Values[1]);
+}
+
+}  // namespace
 
 bool EmulatedUserHal::isSupported(int32_t prop) {
     switch (prop) {
@@ -48,7 +73,7 @@
     }
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetProperty(
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetProperty(
         const VehiclePropValue& value) {
     ALOGV("onSetProperty(): %s", toString(value).c_str());
 
@@ -65,12 +90,12 @@
         case USER_IDENTIFICATION_ASSOCIATION:
             return onSetUserIdentificationAssociation(value);
         default:
-            return android::base::Error((int)StatusCode::INVALID_ARG)
+            return Error(static_cast<int>(StatusCode::INVALID_ARG))
                    << "Unsupported property: " << toString(value);
     }
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onGetProperty(
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onGetProperty(
         const VehiclePropValue& value) {
     ALOGV("onGetProperty(%s)", toString(value).c_str());
     switch (value.prop) {
@@ -79,42 +104,41 @@
         case CREATE_USER:
         case REMOVE_USER:
             ALOGE("onGetProperty(): %d is only supported on SET", value.prop);
-            return android::base::Error(static_cast<int>(StatusCode::INVALID_ARG))
-                   << "only supported on SET";
+            return Error(static_cast<int>(StatusCode::INVALID_ARG)) << "only supported on SET";
         case USER_IDENTIFICATION_ASSOCIATION:
             return onGetUserIdentificationAssociation(value);
         default:
             ALOGE("onGetProperty(): %d is not supported", value.prop);
-            return android::base::Error(static_cast<int>(StatusCode::INVALID_ARG))
-                   << "not supported by User HAL";
+            return Error(static_cast<int>(StatusCode::INVALID_ARG)) << "not supported by User HAL";
     }
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>>
-EmulatedUserHal::onGetUserIdentificationAssociation(const VehiclePropValue& value) {
-    if (mSetUserIdentificationAssociationResponseFromCmd != nullptr) {
-        ALOGI("get(USER_IDENTIFICATION_ASSOCIATION): returning %s",
-              toString(*mSetUserIdentificationAssociationResponseFromCmd).c_str());
-        auto newValue = std::unique_ptr<VehiclePropValue>(
-                new VehiclePropValue(*mSetUserIdentificationAssociationResponseFromCmd));
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onGetUserIdentificationAssociation(
+        const VehiclePropValue& value) {
+    if (mSetUserIdentificationAssociationResponseFromCmd == nullptr) {
+        return defaultUserIdentificationAssociation(value);
+    }
+    ALOGI("get(USER_IDENTIFICATION_ASSOCIATION): returning %s",
+          toString(*mSetUserIdentificationAssociationResponseFromCmd).c_str());
+    auto newValue = std::unique_ptr<VehiclePropValue>(
+            new VehiclePropValue(*mSetUserIdentificationAssociationResponseFromCmd));
+    auto requestId = getRequestId(value);
+    if (requestId.ok()) {
         // Must use the same requestId
-        if (value.value.int32Values.size() > 0) {
-            newValue->value.int32Values[0] = value.value.int32Values[0];
-        } else {
-            ALOGE("get(USER_IDENTIFICATION_ASSOCIATION): no requestId on %s",
-                  toString(value).c_str());
-        }
-        return newValue;
+        newValue->value.int32Values[0] = *requestId;
+    } else {
+        ALOGE("get(USER_IDENTIFICATION_ASSOCIATION): no requestId on %s", toString(value).c_str());
     }
-    return defaultUserIdentificationAssociation(value);
+    return newValue;
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>>
-EmulatedUserHal::onSetInitialUserInfoResponse(const VehiclePropValue& value) {
-    if (value.value.int32Values.size() == 0) {
-        ALOGE("set(INITIAL_USER_INFO): no int32values, ignoring it: %s", toString(value).c_str());
-        return android::base::Error((int)StatusCode::INVALID_ARG)
-               << "no int32values on " << toString(value);
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetInitialUserInfoResponse(
+        const VehiclePropValue& value) {
+    auto requestId = getRequestId(value);
+    if (!requestId.ok()) {
+        ALOGE("Failed to get requestId on set(INITIAL_USER_INFO): %s",
+              requestId.error().message().c_str());
+        return requestId.error();
     }
 
     if (value.areaId != 0) {
@@ -124,40 +148,40 @@
     }
 
     ALOGD("set(INITIAL_USER_INFO) called from Android: %s", toString(value).c_str());
-
-    int32_t requestId = value.value.int32Values[0];
     if (mInitialUserResponseFromCmd != nullptr) {
         ALOGI("replying INITIAL_USER_INFO with lshal value:  %s",
               toString(*mInitialUserResponseFromCmd).c_str());
-        return sendUserHalResponse(std::move(mInitialUserResponseFromCmd), requestId);
+        return sendUserHalResponse(std::move(mInitialUserResponseFromCmd), *requestId);
     }
 
     // Returns default response
-    auto updatedValue = std::unique_ptr<VehiclePropValue>(new VehiclePropValue);
-    updatedValue->prop = INITIAL_USER_INFO;
-    updatedValue->timestamp = elapsedRealtimeNano();
-    updatedValue->value.int32Values.resize(2);
-    updatedValue->value.int32Values[0] = requestId;
-    updatedValue->value.int32Values[1] = (int32_t)InitialUserInfoResponseAction::DEFAULT;
-
+    auto updatedValue = user_hal_helper::toVehiclePropValue(InitialUserInfoResponse{
+            .requestId = *requestId,
+            .action = InitialUserInfoResponseAction::DEFAULT,
+    });
     ALOGI("no lshal response; replying with InitialUserInfoResponseAction::DEFAULT: %s",
           toString(*updatedValue).c_str());
-
     return updatedValue;
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetSwitchUserResponse(
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetSwitchUserResponse(
         const VehiclePropValue& value) {
-    if (value.value.int32Values.size() == 0) {
-        ALOGE("set(SWITCH_USER): no int32values, ignoring it: %s", toString(value).c_str());
-        return android::base::Error((int)StatusCode::INVALID_ARG)
-               << "no int32values on " << toString(value);
+    auto requestId = getRequestId(value);
+    if (!requestId.ok()) {
+        ALOGE("Failed to get requestId on set(SWITCH_USER): %s",
+              requestId.error().message().c_str());
+        return requestId.error();
+    }
+
+    auto messageType = getSwitchUserMessageType(value);
+    if (!messageType.ok()) {
+        ALOGE("Failed to get messageType on set(SWITCH_USER): %s",
+              messageType.error().message().c_str());
+        return messageType.error();
     }
 
     if (value.areaId != 0) {
-        if (value.value.int32Values.size() >= 2 &&
-            static_cast<SwitchUserMessageType>(value.value.int32Values[1]) ==
-                    SwitchUserMessageType::VEHICLE_REQUEST) {
+        if (*messageType == SwitchUserMessageType::VEHICLE_REQUEST) {
             // User HAL can also request a user switch, so we need to check it first
             ALOGD("set(SWITCH_USER) called from lshal to emulate a vehicle request: %s",
                   toString(value).c_str());
@@ -170,48 +194,36 @@
     }
     ALOGD("set(SWITCH_USER) called from Android: %s", toString(value).c_str());
 
-    int32_t requestId = value.value.int32Values[0];
     if (mSwitchUserResponseFromCmd != nullptr) {
         ALOGI("replying SWITCH_USER with lshal value:  %s",
               toString(*mSwitchUserResponseFromCmd).c_str());
-        return sendUserHalResponse(std::move(mSwitchUserResponseFromCmd), requestId);
+        return sendUserHalResponse(std::move(mSwitchUserResponseFromCmd), *requestId);
     }
 
-    if (value.value.int32Values.size() > 1) {
-        auto messageType = static_cast<SwitchUserMessageType>(value.value.int32Values[1]);
-        switch (messageType) {
-            case SwitchUserMessageType::LEGACY_ANDROID_SWITCH:
-                ALOGI("request is LEGACY_ANDROID_SWITCH; ignoring it");
-                return {};
-            case SwitchUserMessageType::ANDROID_POST_SWITCH:
-                ALOGI("request is ANDROID_POST_SWITCH; ignoring it");
-                return {};
-            default:
-                break;
-        }
+    if (*messageType == SwitchUserMessageType::LEGACY_ANDROID_SWITCH ||
+        *messageType == SwitchUserMessageType::ANDROID_POST_SWITCH) {
+        ALOGI("request is %s; ignoring it", toString(*messageType).c_str());
+        return {};
     }
 
     // Returns default response
-    auto updatedValue = std::unique_ptr<VehiclePropValue>(new VehiclePropValue);
-    updatedValue->prop = SWITCH_USER;
-    updatedValue->timestamp = elapsedRealtimeNano();
-    updatedValue->value.int32Values.resize(3);
-    updatedValue->value.int32Values[0] = requestId;
-    updatedValue->value.int32Values[1] = (int32_t)SwitchUserMessageType::VEHICLE_RESPONSE;
-    updatedValue->value.int32Values[2] = (int32_t)SwitchUserStatus::SUCCESS;
-
+    auto updatedValue = user_hal_helper::toVehiclePropValue(SwitchUserResponse{
+            .requestId = *requestId,
+            .messageType = SwitchUserMessageType::VEHICLE_RESPONSE,
+            .status = SwitchUserStatus::SUCCESS,
+    });
     ALOGI("no lshal response; replying with VEHICLE_RESPONSE / SUCCESS: %s",
           toString(*updatedValue).c_str());
-
     return updatedValue;
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetCreateUserResponse(
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetCreateUserResponse(
         const VehiclePropValue& value) {
-    if (value.value.int32Values.size() == 0) {
-        ALOGE("set(CREATE_USER): no int32values, ignoring it: %s", toString(value).c_str());
-        return android::base::Error(static_cast<int>(StatusCode::INVALID_ARG))
-               << "no int32values on " << toString(value);
+    auto requestId = getRequestId(value);
+    if (!requestId.ok()) {
+        ALOGE("Failed to get requestId on set(CREATE_USER): %s",
+              requestId.error().message().c_str());
+        return requestId.error();
     }
 
     if (value.areaId != 0) {
@@ -221,33 +233,28 @@
     }
     ALOGD("set(CREATE_USER) called from Android: %s", toString(value).c_str());
 
-    int32_t requestId = value.value.int32Values[0];
     if (mCreateUserResponseFromCmd != nullptr) {
         ALOGI("replying CREATE_USER with lshal value:  %s",
               toString(*mCreateUserResponseFromCmd).c_str());
-        return sendUserHalResponse(std::move(mCreateUserResponseFromCmd), requestId);
+        return sendUserHalResponse(std::move(mCreateUserResponseFromCmd), *requestId);
     }
 
     // Returns default response
-    auto updatedValue = std::unique_ptr<VehiclePropValue>(new VehiclePropValue);
-    updatedValue->prop = CREATE_USER;
-    updatedValue->timestamp = elapsedRealtimeNano();
-    updatedValue->value.int32Values.resize(2);
-    updatedValue->value.int32Values[0] = requestId;
-    updatedValue->value.int32Values[1] = (int32_t)CreateUserStatus::SUCCESS;
-
+    auto updatedValue = user_hal_helper::toVehiclePropValue(CreateUserResponse{
+            .requestId = *requestId,
+            .status = CreateUserStatus::SUCCESS,
+    });
     ALOGI("no lshal response; replying with SUCCESS: %s", toString(*updatedValue).c_str());
-
     return updatedValue;
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>>
-EmulatedUserHal::onSetUserIdentificationAssociation(const VehiclePropValue& value) {
-    if (value.value.int32Values.size() == 0) {
-        ALOGE("set(USER_IDENTIFICATION_ASSOCIATION): no int32values, ignoring it: %s",
-              toString(value).c_str());
-        return android::base::Error(static_cast<int>(StatusCode::INVALID_ARG))
-               << "no int32values on " << toString(value);
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::onSetUserIdentificationAssociation(
+        const VehiclePropValue& value) {
+    auto requestId = getRequestId(value);
+    if (!requestId.ok()) {
+        ALOGE("Failed to get requestId on set(USER_IDENTIFICATION_ASSOCIATION): %s",
+              requestId.error().message().c_str());
+        return requestId.error();
     }
 
     if (value.areaId != 0) {
@@ -258,28 +265,26 @@
     }
     ALOGD("set(USER_IDENTIFICATION_ASSOCIATION) called from Android: %s", toString(value).c_str());
 
-    int32_t requestId = value.value.int32Values[0];
     if (mSetUserIdentificationAssociationResponseFromCmd != nullptr) {
         ALOGI("replying USER_IDENTIFICATION_ASSOCIATION with lshal value:  %s",
               toString(*mSetUserIdentificationAssociationResponseFromCmd).c_str());
         // Not moving response so it can be used on GET requests
         auto copy = std::unique_ptr<VehiclePropValue>(
                 new VehiclePropValue(*mSetUserIdentificationAssociationResponseFromCmd));
-        return sendUserHalResponse(std::move(copy), requestId);
+        return sendUserHalResponse(std::move(copy), *requestId);
     }
-
     // Returns default response
     return defaultUserIdentificationAssociation(value);
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>>
-EmulatedUserHal::defaultUserIdentificationAssociation(const VehiclePropValue& request) {
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::defaultUserIdentificationAssociation(
+        const VehiclePropValue& request) {
     // TODO(b/159498909): return a response with NOT_ASSOCIATED_ANY_USER for all requested types
     ALOGE("no lshal response for %s; replying with NOT_AVAILABLE", toString(request).c_str());
-    return android::base::Error(static_cast<int>(StatusCode::NOT_AVAILABLE)) << "not set by lshal";
+    return Error(static_cast<int>(StatusCode::NOT_AVAILABLE)) << "not set by lshal";
 }
 
-android::base::Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::sendUserHalResponse(
+Result<std::unique_ptr<VehiclePropValue>> EmulatedUserHal::sendUserHalResponse(
         std::unique_ptr<VehiclePropValue> response, int32_t requestId) {
     switch (response->areaId) {
         case 1:
@@ -293,17 +298,16 @@
         case 3:
             ALOGD("not generating a property change event because of lshal prop: %s",
                   toString(*response).c_str());
-            return android::base::Error((int)StatusCode::NOT_AVAILABLE)
+            return Error(static_cast<int>(StatusCode::NOT_AVAILABLE))
                    << "not generating a property change event because of lshal prop: "
                    << toString(*response);
         default:
             ALOGE("invalid action on lshal response: %s", toString(*response).c_str());
-            return android::base::Error((int)StatusCode::INTERNAL_ERROR)
+            return Error(static_cast<int>(StatusCode::INTERNAL_ERROR))
                    << "invalid action on lshal response: " << toString(*response);
     }
 
     ALOGD("updating property to: %s", toString(*response).c_str());
-
     return response;
 }
 
diff --git a/automotive/vehicle/2.0/utils/UserHalHelper.cpp b/automotive/vehicle/2.0/utils/UserHalHelper.cpp
index 33b3948..fcfe4bf 100644
--- a/automotive/vehicle/2.0/utils/UserHalHelper.cpp
+++ b/automotive/vehicle/2.0/utils/UserHalHelper.cpp
@@ -36,22 +36,6 @@
 static const size_t kNumFieldsPerUserInfo = 2;
 static const size_t kNumFieldsPerSetAssociation = 2;
 
-template <typename T>
-Result<T> verifyAndCast(int32_t value) {
-    T castValue = static_cast<T>(value);
-    const auto iter = hidl_enum_range<T>();
-    if (castValue < *iter.begin() || castValue > *std::prev(iter.end())) {
-        return Error() << "Value " << value << " not in range [" << toString(*iter.begin()) << ", "
-                       << toString(*std::prev(iter.end())) << "]";
-    }
-    for (const auto& v : hidl_enum_range<T>()) {
-        if (castValue == v) {
-            return castValue;
-        }
-    }
-    return Error() << "Value " << value << " not in enum values";
-}
-
 Result<void> verifyPropValue(const VehiclePropValue& propValue, VehicleProperty vehicleProperty,
                              size_t minInt32Values) {
     auto prop = verifyAndCast<VehicleProperty>(propValue.prop);
@@ -154,6 +138,22 @@
 
 }  // namespace
 
+template <typename T>
+Result<T> verifyAndCast(int32_t value) {
+    T castValue = static_cast<T>(value);
+    const auto iter = hidl_enum_range<T>();
+    if (castValue < *iter.begin() || castValue > *std::prev(iter.end())) {
+        return Error() << "Value " << value << " not in range [" << toString(*iter.begin()) << ", "
+                       << toString(*std::prev(iter.end())) << "]";
+    }
+    for (const auto& v : hidl_enum_range<T>()) {
+        if (castValue == v) {
+            return castValue;
+        }
+    }
+    return Error() << "Value " << value << " not in enum values";
+}
+
 Result<InitialUserInfoRequest> toInitialUserInfoRequest(const VehiclePropValue& propValue) {
     auto ret = verifyPropValue(propValue, VehicleProperty::INITIAL_USER_INFO, 2);
     if (!ret.ok()) {
@@ -186,7 +186,8 @@
     if (*messageType != SwitchUserMessageType::LEGACY_ANDROID_SWITCH &&
         *messageType != SwitchUserMessageType::ANDROID_SWITCH &&
         *messageType != SwitchUserMessageType::ANDROID_POST_SWITCH) {
-        return Error() << "Invalid " << toString(*messageType) << " from Android System";
+        return Error() << "Invalid " << toString(*messageType)
+                       << " message type from Android System";
     }
     request.requestId = propValue.value.int32Values[0];
     request.messageType = *messageType;
diff --git a/automotive/vehicle/2.0/utils/UserHalHelper.h b/automotive/vehicle/2.0/utils/UserHalHelper.h
index bee34cf..fad7145 100644
--- a/automotive/vehicle/2.0/utils/UserHalHelper.h
+++ b/automotive/vehicle/2.0/utils/UserHalHelper.h
@@ -31,6 +31,11 @@
 
 namespace user_hal_helper {
 
+// Verify whether the |value| can be casted to the type |T| and return the casted value on success.
+// Otherwise, return the error.
+template <typename T>
+android::base::Result<T> verifyAndCast(int32_t value);
+
 // Below functions parse VehiclePropValues to the respective User HAL request structs. On success,
 // these functions return the User HAL struct. Otherwise, they return the error.
 android::base::Result<InitialUserInfoRequest> toInitialUserInfoRequest(
diff --git a/common/aidl/aidl_api/android.hardware.common/current/android/hardware/common/GrantorDescriptor.aidl b/common/aidl/aidl_api/android.hardware.common/current/android/hardware/common/GrantorDescriptor.aidl
new file mode 100644
index 0000000..07bceb0
--- /dev/null
+++ b/common/aidl/aidl_api/android.hardware.common/current/android/hardware/common/GrantorDescriptor.aidl
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.common;
+@VintfStability
+parcelable GrantorDescriptor {
+  int offset;
+  long extent;
+}
diff --git a/common/aidl/aidl_api/android.hardware.common/current/android/hardware/common/MQDescriptor.aidl b/common/aidl/aidl_api/android.hardware.common/current/android/hardware/common/MQDescriptor.aidl
new file mode 100644
index 0000000..c9fe1d7
--- /dev/null
+++ b/common/aidl/aidl_api/android.hardware.common/current/android/hardware/common/MQDescriptor.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.common;
+@VintfStability
+parcelable MQDescriptor {
+  android.hardware.common.GrantorDescriptor[] grantors;
+  ParcelFileDescriptor fileDescriptor;
+  int quantum;
+  int flags;
+}
diff --git a/common/aidl/android/hardware/common/GrantorDescriptor.aidl b/common/aidl/android/hardware/common/GrantorDescriptor.aidl
new file mode 100644
index 0000000..3552e9e
--- /dev/null
+++ b/common/aidl/android/hardware/common/GrantorDescriptor.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.common;
+
+/*
+ * Included in MQDescriptor, for use with libfmq.
+ */
+@VintfStability
+parcelable GrantorDescriptor {
+    /*
+     * The offset of this descriptor in the shared memory in bytes.
+     */
+    int offset;
+    /*
+     * The size of this descriptor in bytes.
+     */
+    long extent;
+}
diff --git a/common/aidl/android/hardware/common/MQDescriptor.aidl b/common/aidl/android/hardware/common/MQDescriptor.aidl
new file mode 100644
index 0000000..8997688
--- /dev/null
+++ b/common/aidl/android/hardware/common/MQDescriptor.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.common;
+
+import android.hardware.common.GrantorDescriptor;
+
+/*
+ * For use with libfmq. This is created from an instance of AidlMessageQueue,
+ * and is used to pass information required to create another instance of that
+ * queue for fast communication.
+ */
+@VintfStability
+parcelable MQDescriptor {
+    /*
+     * Describes each of the grantors for the message queue. They are used to
+     * get the readptr, writeptr, dataptr, and the optional EventFlag word
+     * for blocking operations in the shared memory.
+     */
+    GrantorDescriptor[] grantors;
+    /* File descriptor for shared memory used in the message queue */
+    ParcelFileDescriptor fileDescriptor;
+    /* Size of each item, T, in bytes */
+    int quantum;
+    /* EventFlag word for blocking operations */
+    int flags;
+}
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
index 44fbc64..089c89a 100644
--- a/compatibility_matrices/compatibility_matrix.current.xml
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -362,9 +362,8 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="hidl" optional="true">
-        <name>android.hardware.power.stats</name>
-        <version>1.0</version>
+    <hal format="aidl" optional="true">
+        <name>android.hardware.powerstats</name>
         <interface>
             <name>IPowerStats</name>
             <instance>default</instance>
diff --git a/current.txt b/current.txt
index 594ceb6..b929f7d 100644
--- a/current.txt
+++ b/current.txt
@@ -777,3 +777,6 @@
 # HALs released in Android S
 # NOTE: waiting to freeze HALs until later in the release
 # NOTE: new HALs are recommended to be in AIDL
+57d183b10b13ec0a8e542c0b3d61991ae541c60e85dbbc5499bb21dfd068cbb8 android.hardware.wifi.supplicant@1.4::types
+17818b6b1952a75e4364ae82c534b9d2f5c0a9765a56256b16faa5a5cf45d3a8 android.hardware.wifi.supplicant@1.4::ISupplicant
+8342b5f6ec8f48ad2b741128aede010995d0b5709257b7ec09bb469b4f61ef1a android.hardware.wifi.supplicant@1.4::ISupplicantStaIface
diff --git a/drm/1.0/vts/functional/AndroidTest.xml b/drm/1.0/vts/functional/AndroidTest.xml
index 92ea7e4..02c51cc 100644
--- a/drm/1.0/vts/functional/AndroidTest.xml
+++ b/drm/1.0/vts/functional/AndroidTest.xml
@@ -16,6 +16,7 @@
 <configuration description="Runs VtsHalDrmV1_0TargetTest.">
     <option name="test-suite-tag" value="apct" />
     <option name="test-suite-tag" value="apct-native" />
+    <option name="not-shardable" value="true" />
 
     <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer"/>
 
diff --git a/drm/1.1/vts/functional/AndroidTest.xml b/drm/1.1/vts/functional/AndroidTest.xml
index 24eeb72..4757d4a 100644
--- a/drm/1.1/vts/functional/AndroidTest.xml
+++ b/drm/1.1/vts/functional/AndroidTest.xml
@@ -16,6 +16,7 @@
 <configuration description="Runs VtsHalDrmV1_1TargetTest.">
     <option name="test-suite-tag" value="apct" />
     <option name="test-suite-tag" value="apct-native" />
+    <option name="not-shardable" value="true" />
 
     <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer"/>
 
diff --git a/drm/1.2/vts/functional/AndroidTest.xml b/drm/1.2/vts/functional/AndroidTest.xml
index 3285c37..106ad33 100644
--- a/drm/1.2/vts/functional/AndroidTest.xml
+++ b/drm/1.2/vts/functional/AndroidTest.xml
@@ -16,6 +16,7 @@
 <configuration description="Runs VtsHalDrmV1_2TargetTest.">
     <option name="test-suite-tag" value="apct" />
     <option name="test-suite-tag" value="apct-native" />
+    <option name="not-shardable" value="true" />
 
     <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer"/>
 
diff --git a/drm/1.3/vts/functional/AndroidTest.xml b/drm/1.3/vts/functional/AndroidTest.xml
index 9cc8e0c..4ec5c70 100644
--- a/drm/1.3/vts/functional/AndroidTest.xml
+++ b/drm/1.3/vts/functional/AndroidTest.xml
@@ -16,6 +16,7 @@
 <configuration description="Runs VtsHalDrmV1_3TargetTest.">
     <option name="test-suite-tag" value="apct" />
     <option name="test-suite-tag" value="apct-native" />
+    <option name="not-shardable" value="true" />
 
     <target_preparer class="com.android.tradefed.targetprep.RootTargetPreparer"/>
 
diff --git a/gnss/2.1/vts/functional/gnss_hal_test_cases.cpp b/gnss/2.1/vts/functional/gnss_hal_test_cases.cpp
index a3d2956..16e634f 100644
--- a/gnss/2.1/vts/functional/gnss_hal_test_cases.cpp
+++ b/gnss/2.1/vts/functional/gnss_hal_test_cases.cpp
@@ -363,6 +363,12 @@
  * formerly strongest satellite
  */
 TEST_P(GnssHalTest, BlacklistIndividualSatellites) {
+    if (!(gnss_cb_->last_capabilities_ & IGnssCallback_2_1::Capabilities::SATELLITE_BLACKLIST)) {
+        ALOGI("Test BlacklistIndividualSatellites skipped. SATELLITE_BLACKLIST capability not "
+              "supported.");
+        return;
+    }
+
     const int kLocationsToAwait = 3;
     const int kRetriesToUnBlacklist = 10;
 
@@ -504,6 +510,12 @@
  * 4a & b) Clean up by turning off location, and send in empty blacklist.
  */
 TEST_P(GnssHalTest, BlacklistConstellationLocationOff) {
+    if (!(gnss_cb_->last_capabilities_ & IGnssCallback_2_1::Capabilities::SATELLITE_BLACKLIST)) {
+        ALOGI("Test BlacklistConstellationLocationOff skipped. SATELLITE_BLACKLIST capability not "
+              "supported.");
+        return;
+    }
+
     const int kLocationsToAwait = 3;
     const int kGnssSvInfoListTimeout = 2;
 
@@ -580,6 +592,12 @@
  * 4a & b) Clean up by turning off location, and send in empty blacklist.
  */
 TEST_P(GnssHalTest, BlacklistConstellationLocationOn) {
+    if (!(gnss_cb_->last_capabilities_ & IGnssCallback_2_1::Capabilities::SATELLITE_BLACKLIST)) {
+        ALOGI("Test BlacklistConstellationLocationOn skipped. SATELLITE_BLACKLIST capability not "
+              "supported.");
+        return;
+    }
+
     const int kLocationsToAwait = 3;
     const int kGnssSvInfoListTimeout = 2;
 
diff --git a/graphics/mapper/2.0/vts/functional/VtsHalGraphicsMapperV2_0TargetTest.cpp b/graphics/mapper/2.0/vts/functional/VtsHalGraphicsMapperV2_0TargetTest.cpp
index b079a4b..7d733ff 100644
--- a/graphics/mapper/2.0/vts/functional/VtsHalGraphicsMapperV2_0TargetTest.cpp
+++ b/graphics/mapper/2.0/vts/functional/VtsHalGraphicsMapperV2_0TargetTest.cpp
@@ -410,6 +410,7 @@
 #endif
 }
 
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(GraphicsMapperHidlTest);
 INSTANTIATE_TEST_CASE_P(
         PerInstance, GraphicsMapperHidlTest,
         testing::Combine(
diff --git a/identity/support/src/IdentityCredentialSupport.cpp b/identity/support/src/IdentityCredentialSupport.cpp
index 8e099e7..747f182 100644
--- a/identity/support/src/IdentityCredentialSupport.cpp
+++ b/identity/support/src/IdentityCredentialSupport.cpp
@@ -1536,12 +1536,6 @@
         return {};
     }
 
-    int algoId = OBJ_obj2nid(certs[0]->cert_info->key->algor->algorithm);
-    if (algoId != NID_X9_62_id_ecPublicKey) {
-        LOG(ERROR) << "Expected NID_X9_62_id_ecPublicKey, got " << OBJ_nid2ln(algoId);
-        return {};
-    }
-
     auto pkey = EVP_PKEY_Ptr(X509_get_pubkey(certs[0].get()));
     if (pkey.get() == nullptr) {
         LOG(ERROR) << "No public key";
@@ -1769,11 +1763,11 @@
 
     ecdsaCoseSignature.clear();
     ecdsaCoseSignature.resize(64);
-    if (BN_bn2binpad(sig->r, ecdsaCoseSignature.data(), 32) != 32) {
+    if (BN_bn2binpad(ECDSA_SIG_get0_r(sig), ecdsaCoseSignature.data(), 32) != 32) {
         LOG(ERROR) << "Error encoding r";
         return false;
     }
-    if (BN_bn2binpad(sig->s, ecdsaCoseSignature.data() + 32, 32) != 32) {
+    if (BN_bn2binpad(ECDSA_SIG_get0_s(sig), ecdsaCoseSignature.data() + 32, 32) != 32) {
         LOG(ERROR) << "Error encoding s";
         return false;
     }
diff --git a/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h b/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h
index ff08066..3e29206 100644
--- a/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h
+++ b/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h
@@ -17,6 +17,7 @@
 #ifndef SYSTEM_SECURITY_KEYSTORE_KM4_AUTHORIZATION_SET_H_
 #define SYSTEM_SECURITY_KEYSTORE_KM4_AUTHORIZATION_SET_H_
 
+#include <functional>
 #include <vector>
 
 #include <keymasterV4_0/keymaster_tags.h>
@@ -165,11 +166,12 @@
      */
     bool Contains(Tag tag) const { return find(tag) != -1; }
 
-    template <TagType tag_type, Tag tag, typename ValueT>
-    bool Contains(TypedTag<tag_type, tag> ttag, const ValueT& value) const {
+    template <TagType tag_type, Tag tag, typename ValueT, typename Comparator = std::equal_to<>>
+    bool Contains(TypedTag<tag_type, tag> ttag, const ValueT& value,
+                  Comparator cmp = Comparator()) const {
         for (const auto& param : data_) {
             auto entry = authorizationValue(ttag, param);
-            if (entry.isOk() && static_cast<ValueT>(entry.value()) == value) return true;
+            if (entry.isOk() && cmp(static_cast<ValueT>(entry.value()), value)) return true;
         }
         return false;
     }
diff --git a/keymaster/4.0/vts/functional/VerificationTokenTest.cpp b/keymaster/4.0/vts/functional/VerificationTokenTest.cpp
index bab1439..4f0a7a3 100644
--- a/keymaster/4.0/vts/functional/VerificationTokenTest.cpp
+++ b/keymaster/4.0/vts/functional/VerificationTokenTest.cpp
@@ -111,19 +111,19 @@
 
     EXPECT_GE(host_time_delta, time_to_sleep)
         << "We slept for " << time_to_sleep << " ms, the clock must have advanced by that much";
-    EXPECT_LE(host_time_delta, time_to_sleep + 20)
+    EXPECT_LE(host_time_delta, time_to_sleep + 100)
         << "The verifyAuthorization call took " << (host_time_delta - time_to_sleep)
         << " ms?  That's awful!";
 
     auto km_time_delta = result2.token.timestamp - result1.token.timestamp;
 
     // If not too much else is going on on the system, the time delta should be quite close.  Allow
-    // 2 ms of slop just to avoid test flakiness.
+    // 20 ms of slop just to avoid test flakiness.
     //
     // TODO(swillden): see if we can output values so they can be gathered across many runs and
     // report if times aren't nearly always <1ms apart.
-    EXPECT_LE(host_time_delta, km_time_delta + 2);
-    EXPECT_LE(km_time_delta, host_time_delta + 2);
+    EXPECT_LE(host_time_delta, km_time_delta + 20);
+    EXPECT_LE(km_time_delta, host_time_delta + 20);
     ASSERT_EQ(result1.token.mac.size(), result2.token.mac.size());
     ASSERT_NE(0,
               memcmp(result1.token.mac.data(), result2.token.mac.data(), result1.token.mac.size()));
@@ -172,14 +172,14 @@
 
     EXPECT_GE(host_time_delta, time_to_sleep)
             << "We slept for " << time_to_sleep << " ms, the clock must have advanced by that much";
-    EXPECT_LE(host_time_delta, time_to_sleep + 20)
+    EXPECT_LE(host_time_delta, time_to_sleep + 100)
             << "The verifyAuthorization call took " << (host_time_delta - time_to_sleep)
             << " ms?  That's awful!";
 
     auto km_time_delta = result2.token.timestamp - result1.token.timestamp;
 
-    EXPECT_LE(host_time_delta, km_time_delta + 2);
-    EXPECT_LE(km_time_delta, host_time_delta + 2);
+    EXPECT_LE(host_time_delta, km_time_delta + 20);
+    EXPECT_LE(km_time_delta, host_time_delta + 20);
     ASSERT_EQ(result1.token.mac.size(), result2.token.mac.size());
     ASSERT_NE(0,
               memcmp(result1.token.mac.data(), result2.token.mac.data(), result1.token.mac.size()));
diff --git a/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp b/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
index aa2de2a..f196928 100644
--- a/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
+++ b/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
@@ -17,9 +17,12 @@
 #define LOG_TAG "keymaster_hidl_hal_test"
 #include <cutils/log.h>
 
-#include <iostream>
 #include <signal.h>
 
+#include <functional>
+#include <iostream>
+#include <string>
+
 #include <openssl/evp.h>
 #include <openssl/mem.h>
 #include <openssl/x509.h>
@@ -32,6 +35,8 @@
 
 #include "KeymasterHidlTest.h"
 
+using namespace std::string_literals;
+
 static bool arm_deleteAllKeys = false;
 static bool dump_Attestations = false;
 
@@ -315,6 +320,12 @@
     return property_get("ro.boot.vbmeta.device_state", value, "") != 0;
 }
 
+bool is_gsi() {
+    char property_value[PROPERTY_VALUE_MAX] = {};
+    EXPECT_NE(property_get("ro.product.system.name", property_value, ""), 0);
+    return "mainline"s == property_value;
+}
+
 }  // namespace
 
 bool verify_attestation_record(const string& challenge, const string& app_id,
@@ -512,9 +523,25 @@
         EXPECT_TRUE(auths.Contains(TAG_OS_VERSION, os_version()))
             << "OS version is " << os_version() << " key reported "
             << auths.GetTagValue(TAG_OS_VERSION);
-        EXPECT_TRUE(auths.Contains(TAG_OS_PATCHLEVEL, os_patch_level()))
-            << "OS patch level is " << os_patch_level() << " key reported "
-            << auths.GetTagValue(TAG_OS_PATCHLEVEL);
+
+        if (is_gsi()) {
+            // In general, TAG_OS_PATCHLEVEL should be equal to os_patch_level()
+            // reported from the system.img in use. But it is allowed to boot a
+            // GSI system.img with newer patch level, which means TAG_OS_PATCHLEVEL
+            // might be less than or equal to os_patch_level() in this case.
+            EXPECT_TRUE(auths.Contains(TAG_OS_PATCHLEVEL,  // vbmeta.img patch level
+                                       os_patch_level(),   // system.img patch level
+                                       std::less_equal<>()))
+                    << "OS patch level is " << os_patch_level()
+                    << ", which is less than key reported " << auths.GetTagValue(TAG_OS_PATCHLEVEL);
+        } else {
+            EXPECT_TRUE(auths.Contains(TAG_OS_PATCHLEVEL,  // vbmeta.img patch level
+                                       os_patch_level(),   // system.img patch level
+                                       std::equal_to<>()))
+                    << "OS patch level is " << os_patch_level()
+                    << ", which is not equal to key reported "
+                    << auths.GetTagValue(TAG_OS_PATCHLEVEL);
+        }
     }
 
     void CheckCharacteristics(const HidlBuf& key_blob,
@@ -4537,7 +4564,7 @@
  * that aborting the operations clears the operations.
  *
  */
-TEST_P(ClearOperationsTest, TooManyOperations) {
+TEST_P(ClearOperationsTest, DISABLED_TooManyOperations) {
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .Authorization(TAG_NO_AUTH_REQUIRED)
                                              .RsaEncryptionKey(2048, 65537)
diff --git a/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp b/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp
index 449b8f3..70bee35 100644
--- a/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp
+++ b/neuralnetworks/1.2/vts/functional/CompilationCachingTests.cpp
@@ -251,7 +251,7 @@
         for (uint32_t i = 0; i < mNumDataCache; i++) {
             mDataCache.push_back({mCacheDir + "data" + std::to_string(i)});
         }
-        // Dummy handles, use AccessMode::WRITE_ONLY for createCacheHandles to create files.
+        // Sample handles, use AccessMode::WRITE_ONLY for createCacheHandles to create files.
         hidl_vec<hidl_handle> modelHandle, dataHandle, tmpHandle;
         createCacheHandles(mModelCache, AccessMode::WRITE_ONLY, &modelHandle);
         createCacheHandles(mDataCache, AccessMode::WRITE_ONLY, &dataHandle);
@@ -469,18 +469,18 @@
         hidl_vec<hidl_handle> modelCache, dataCache;
         createCacheHandles(mModelCache, AccessMode::READ_WRITE, &modelCache);
         createCacheHandles(mDataCache, AccessMode::READ_WRITE, &dataCache);
-        uint8_t dummyBytes[] = {0, 0};
-        // Write a dummy integer to the cache.
+        uint8_t sampleBytes[] = {0, 0};
+        // Write a sample integer to the cache.
         // The driver should be able to handle non-empty cache and non-zero fd offset.
         for (uint32_t i = 0; i < modelCache.size(); i++) {
-            ASSERT_EQ(write(modelCache[i].getNativeHandle()->data[0], &dummyBytes,
-                            sizeof(dummyBytes)),
-                      sizeof(dummyBytes));
+            ASSERT_EQ(write(modelCache[i].getNativeHandle()->data[0], &sampleBytes,
+                            sizeof(sampleBytes)),
+                      sizeof(sampleBytes));
         }
         for (uint32_t i = 0; i < dataCache.size(); i++) {
             ASSERT_EQ(
-                    write(dataCache[i].getNativeHandle()->data[0], &dummyBytes, sizeof(dummyBytes)),
-                    sizeof(dummyBytes));
+                    write(dataCache[i].getNativeHandle()->data[0], &sampleBytes, sizeof(sampleBytes)),
+                    sizeof(sampleBytes));
         }
         saveModelToCache(model, modelCache, dataCache);
     }
@@ -492,14 +492,14 @@
         hidl_vec<hidl_handle> modelCache, dataCache;
         createCacheHandles(mModelCache, AccessMode::READ_WRITE, &modelCache);
         createCacheHandles(mDataCache, AccessMode::READ_WRITE, &dataCache);
-        uint8_t dummyByte = 0;
+        uint8_t sampleByte = 0;
         // Advance the offset of each handle by one byte.
         // The driver should be able to handle non-zero fd offset.
         for (uint32_t i = 0; i < modelCache.size(); i++) {
-            ASSERT_GE(read(modelCache[i].getNativeHandle()->data[0], &dummyByte, 1), 0);
+            ASSERT_GE(read(modelCache[i].getNativeHandle()->data[0], &sampleByte, 1), 0);
         }
         for (uint32_t i = 0; i < dataCache.size(); i++) {
-            ASSERT_GE(read(dataCache[i].getNativeHandle()->data[0], &dummyByte, 1), 0);
+            ASSERT_GE(read(dataCache[i].getNativeHandle()->data[0], &sampleByte, 1), 0);
         }
         prepareModelFromCache(modelCache, dataCache, &preparedModel, &status);
         if (!mIsCachingSupported) {
@@ -1209,9 +1209,9 @@
     return gtestCompliantName(getName(namedDevice) + "_" + type);
 }
 
-INSTANTIATE_TEST_CASE_P(TestCompilationCaching, CompilationCachingTest,
-                        testing::Combine(kNamedDeviceChoices, kOperandTypeChoices),
-                        printCompilationCachingTest);
+INSTANTIATE_TEST_SUITE_P(TestCompilationCaching, CompilationCachingTest,
+                         testing::Combine(kNamedDeviceChoices, kOperandTypeChoices),
+                         printCompilationCachingTest);
 
 using CompilationCachingSecurityTestParam = std::tuple<NamedDevice, OperandType, uint32_t>;
 
@@ -1365,9 +1365,9 @@
     return gtestCompliantName(getName(namedDevice) + "_" + type + "_" + std::to_string(seed));
 }
 
-INSTANTIATE_TEST_CASE_P(TestCompilationCaching, CompilationCachingSecurityTest,
-                        testing::Combine(kNamedDeviceChoices, kOperandTypeChoices,
-                                         testing::Range(0U, 10U)),
-                        printCompilationCachingSecurityTest);
+INSTANTIATE_TEST_SUITE_P(TestCompilationCaching, CompilationCachingSecurityTest,
+                         testing::Combine(kNamedDeviceChoices, kOperandTypeChoices,
+                                          testing::Range(0U, 10U)),
+                         printCompilationCachingSecurityTest);
 
 }  // namespace android::hardware::neuralnetworks::V1_2::vts::functional
diff --git a/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp b/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp
index ac18c8f..4003492 100644
--- a/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp
+++ b/neuralnetworks/1.3/vts/functional/CompilationCachingTests.cpp
@@ -1200,9 +1200,9 @@
     return gtestCompliantName(getName(namedDevice) + "_" + type);
 }
 
-INSTANTIATE_TEST_CASE_P(TestCompilationCaching, CompilationCachingTest,
-                        testing::Combine(kNamedDeviceChoices, kOperandTypeChoices),
-                        printCompilationCachingTest);
+INSTANTIATE_TEST_SUITE_P(TestCompilationCaching, CompilationCachingTest,
+                         testing::Combine(kNamedDeviceChoices, kOperandTypeChoices),
+                         printCompilationCachingTest);
 
 using CompilationCachingSecurityTestParam = std::tuple<NamedDevice, OperandType, uint32_t>;
 
@@ -1356,9 +1356,9 @@
     return gtestCompliantName(getName(namedDevice) + "_" + type + "_" + std::to_string(seed));
 }
 
-INSTANTIATE_TEST_CASE_P(TestCompilationCaching, CompilationCachingSecurityTest,
-                        testing::Combine(kNamedDeviceChoices, kOperandTypeChoices,
-                                         testing::Range(0U, 10U)),
-                        printCompilationCachingSecurityTest);
+INSTANTIATE_TEST_SUITE_P(TestCompilationCaching, CompilationCachingSecurityTest,
+                         testing::Combine(kNamedDeviceChoices, kOperandTypeChoices,
+                                          testing::Range(0U, 10U)),
+                         printCompilationCachingSecurityTest);
 
 }  // namespace android::hardware::neuralnetworks::V1_3::vts::functional
diff --git a/neuralnetworks/1.3/vts/functional/MemoryDomainTests.cpp b/neuralnetworks/1.3/vts/functional/MemoryDomainTests.cpp
index 3c0c885..0c657e0 100644
--- a/neuralnetworks/1.3/vts/functional/MemoryDomainTests.cpp
+++ b/neuralnetworks/1.3/vts/functional/MemoryDomainTests.cpp
@@ -605,9 +605,9 @@
     return gtestCompliantName(getName(namedDevice) + "_" + type);
 }
 
-INSTANTIATE_TEST_CASE_P(TestMemoryDomain, MemoryDomainAllocateTest,
-                        testing::Combine(kNamedDeviceChoices, kTestOperandTypeChoices),
-                        printMemoryDomainAllocateTest);
+INSTANTIATE_TEST_SUITE_P(TestMemoryDomain, MemoryDomainAllocateTest,
+                         testing::Combine(kNamedDeviceChoices, kTestOperandTypeChoices),
+                         printMemoryDomainAllocateTest);
 
 class MemoryDomainCopyTestBase : public MemoryDomainTestBase {
   protected:
@@ -829,9 +829,9 @@
     return gtestCompliantName(getName(namedDevice) + "_" + type);
 }
 
-INSTANTIATE_TEST_CASE_P(TestMemoryDomain, MemoryDomainCopyTest,
-                        testing::Combine(kNamedDeviceChoices, kTestOperandTypeChoices),
-                        printMemoryDomainCopyTest);
+INSTANTIATE_TEST_SUITE_P(TestMemoryDomain, MemoryDomainCopyTest,
+                         testing::Combine(kNamedDeviceChoices, kTestOperandTypeChoices),
+                         printMemoryDomainCopyTest);
 
 using MemoryDomainExecutionTestParam = std::tuple<NamedDevice, TestOperandType, Executor>;
 class MemoryDomainExecutionTest
@@ -1195,9 +1195,9 @@
     return gtestCompliantName(getName(namedDevice) + "_" + type + "_" + executorStr);
 }
 
-INSTANTIATE_TEST_CASE_P(TestMemoryDomain, MemoryDomainExecutionTest,
-                        testing::Combine(kNamedDeviceChoices, kTestOperandTypeChoices,
-                                         kExecutorChoices),
-                        printMemoryDomainExecutionTest);
+INSTANTIATE_TEST_SUITE_P(TestMemoryDomain, MemoryDomainExecutionTest,
+                         testing::Combine(kNamedDeviceChoices, kTestOperandTypeChoices,
+                                          kExecutorChoices),
+                         printMemoryDomainExecutionTest);
 
 }  // namespace android::hardware::neuralnetworks::V1_3::vts::functional
diff --git a/powerstats/aidl/Android.bp b/powerstats/aidl/Android.bp
new file mode 100644
index 0000000..1aa58cb
--- /dev/null
+++ b/powerstats/aidl/Android.bp
@@ -0,0 +1,35 @@
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+aidl_interface {
+    name: "android.hardware.powerstats",
+    vendor_available: true,
+    srcs: [
+        "android/hardware/powerstats/*.aidl",
+    ],
+    stability: "vintf",
+    backend: {
+        java: {
+            platform_apis: true,
+        },
+        ndk: {
+            vndk: {
+                enabled: true,
+            },
+        },
+        cpp: {
+            enabled: false,
+        },
+    },
+}
diff --git a/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/EnergyData.aidl b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/EnergyData.aidl
new file mode 100644
index 0000000..2e384da
--- /dev/null
+++ b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/EnergyData.aidl
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.powerstats;
+@VintfStability
+parcelable EnergyData {
+  int railIndex;
+  long timestampMs;
+  long energyUWs;
+}
diff --git a/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/IPowerStats.aidl b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/IPowerStats.aidl
new file mode 100644
index 0000000..6772f6f
--- /dev/null
+++ b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/IPowerStats.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.powerstats;
+@VintfStability
+interface IPowerStats {
+  android.hardware.powerstats.EnergyData[] getEnergyData(in int[] railIndices);
+  android.hardware.powerstats.PowerEntityInfo[] getPowerEntityInfo();
+  android.hardware.powerstats.PowerEntityStateResidencyResult[] getPowerEntityStateResidencyData(in int[] powerEntityIds);
+  android.hardware.powerstats.RailInfo[] getRailInfo();
+}
diff --git a/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityInfo.aidl b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityInfo.aidl
new file mode 100644
index 0000000..016af91
--- /dev/null
+++ b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityInfo.aidl
@@ -0,0 +1,24 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.powerstats;
+@VintfStability
+parcelable PowerEntityInfo {
+  int powerEntityId;
+  String powerEntityName;
+  android.hardware.powerstats.PowerEntityStateInfo[] states;
+}
diff --git a/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateInfo.aidl b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateInfo.aidl
new file mode 100644
index 0000000..9de66ba
--- /dev/null
+++ b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateInfo.aidl
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.powerstats;
+@VintfStability
+parcelable PowerEntityStateInfo {
+  int powerEntityStateId;
+  String powerEntityStateName;
+}
diff --git a/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateResidencyData.aidl b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateResidencyData.aidl
new file mode 100644
index 0000000..8a3b227
--- /dev/null
+++ b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateResidencyData.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.powerstats;
+@VintfStability
+parcelable PowerEntityStateResidencyData {
+  int powerEntityStateId;
+  long totalTimeInStateMs;
+  long totalStateEntryCount;
+  long lastEntryTimestampMs;
+}
diff --git a/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateResidencyResult.aidl b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateResidencyResult.aidl
new file mode 100644
index 0000000..fbe567e
--- /dev/null
+++ b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/PowerEntityStateResidencyResult.aidl
@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.powerstats;
+@VintfStability
+parcelable PowerEntityStateResidencyResult {
+  int powerEntityId;
+  android.hardware.powerstats.PowerEntityStateResidencyData[] stateResidencyData;
+}
diff --git a/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/RailInfo.aidl b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/RailInfo.aidl
new file mode 100644
index 0000000..413ea0d
--- /dev/null
+++ b/powerstats/aidl/aidl_api/android.hardware.powerstats/current/android/hardware/powerstats/RailInfo.aidl
@@ -0,0 +1,25 @@
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
+// edit this file. It looks like you are doing that because you have modified
+// an AIDL interface in a backward-incompatible way, e.g., deleting a function
+// from an interface or a field from a parcelable and it broke the build. That
+// breakage is intended.
+//
+// You must not make a backward incompatible changes to the AIDL files built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.powerstats;
+@VintfStability
+parcelable RailInfo {
+  int railIndex;
+  String railName;
+  String subsysName;
+  int samplingRateHz;
+}
diff --git a/powerstats/aidl/android/hardware/powerstats/EnergyData.aidl b/powerstats/aidl/android/hardware/powerstats/EnergyData.aidl
new file mode 100644
index 0000000..ec12c5e
--- /dev/null
+++ b/powerstats/aidl/android/hardware/powerstats/EnergyData.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.powerstats;
+
+@VintfStability
+parcelable EnergyData {
+    /**
+     * Index corresponding to the rail. This index matches
+     * the index returned in RailInfo
+     */
+    int railIndex;
+    /**
+     * Time since device boot(CLOCK_BOOTTIME) in milli-seconds
+     */
+    long timestampMs;
+    /**
+     * Accumulated energy since device boot in microwatt-seconds (uWs)
+     */
+    long energyUWs;
+}
+
diff --git a/powerstats/aidl/android/hardware/powerstats/IPowerStats.aidl b/powerstats/aidl/android/hardware/powerstats/IPowerStats.aidl
new file mode 100644
index 0000000..93d1448
--- /dev/null
+++ b/powerstats/aidl/android/hardware/powerstats/IPowerStats.aidl
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.powerstats;
+
+import android.hardware.powerstats.EnergyData;
+import android.hardware.powerstats.PowerEntityInfo;
+import android.hardware.powerstats.PowerEntityStateResidencyResult;
+import android.hardware.powerstats.RailInfo;
+
+@VintfStability
+interface IPowerStats {
+    /**
+     * Rail level energy measurements for low frequency clients:
+     * Reports accumulated energy since boot on each rail.
+     *
+     * @param railIndices Indices of rails for which data is required.
+     *     To get data for all rails pass an empty vector. Rail name to
+     *     index mapping can be queried from getRailInfo() API.
+     * @return Energy values since boot for all requested rails.
+     */
+    EnergyData[] getEnergyData(in int[] railIndices);
+
+    /**
+     * PowerEntity information:
+     * Reports information related to all supported PowerEntity(s) for which
+     * data is available. A PowerEntity is defined as a platform subsystem,
+     * peripheral, or power domain that impacts the total device power
+     * consumption.
+     *
+     * @return List of information on each PowerEntity
+     */
+    PowerEntityInfo[] getPowerEntityInfo();
+
+    /**
+     * PowerEntity residencies for low frequency clients:
+     * Reports accumulated residency data for each specified PowerEntity.
+     * Each PowerEntity may reside in one of multiple states. It may also
+     * transition to another state. Residency data is an accumulation of time
+     * that a specified PowerEntity resided in each of its possible states,
+     * the number of times that each state was entered, and a timestamp
+     * corresponding to the last time that state was entered. Data is
+     * accumulated starting from the last time the PowerEntity was reset.
+     *
+     * @param powerEntityId collection of IDs of PowerEntity(s) for which
+     *     residency data is requested. PowerEntity name to ID mapping may
+     *     be queried from getPowerEntityInfo(). To get state residency
+     *     data for all PowerEntity(s) pass an empty vector.
+     * @return state residency data for each specified
+     *     PowerEntity that provides state residency data.
+     */
+    PowerEntityStateResidencyResult[] getPowerEntityStateResidencyData(in int[] powerEntityIds);
+
+    /**
+     * Rail information:
+     * Reports information related to the rails being monitored.
+     *
+     * @return Information about monitored rails.
+     */
+    RailInfo[] getRailInfo();
+}
\ No newline at end of file
diff --git a/powerstats/aidl/android/hardware/powerstats/PowerEntityInfo.aidl b/powerstats/aidl/android/hardware/powerstats/PowerEntityInfo.aidl
new file mode 100644
index 0000000..72222a6
--- /dev/null
+++ b/powerstats/aidl/android/hardware/powerstats/PowerEntityInfo.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.powerstats;
+
+import android.hardware.powerstats.PowerEntityStateInfo;
+
+/**
+ * PowerEntityInfo contains information, such as the ID, name, and type of a
+ * given PowerEntity.
+ */
+@VintfStability
+parcelable PowerEntityInfo {
+    /**
+     * Unique ID corresponding to the PowerEntity
+     */
+    int powerEntityId;
+    /**
+     * Name of the PowerEntity (opaque to the framework)
+     */
+    String powerEntityName;
+    /**
+     * List of states that the PowerEntity may reside in
+     */
+    PowerEntityStateInfo[] states;
+}
\ No newline at end of file
diff --git a/powerstats/aidl/android/hardware/powerstats/PowerEntityStateInfo.aidl b/powerstats/aidl/android/hardware/powerstats/PowerEntityStateInfo.aidl
new file mode 100644
index 0000000..69fc798
--- /dev/null
+++ b/powerstats/aidl/android/hardware/powerstats/PowerEntityStateInfo.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.powerstats;
+
+@VintfStability
+parcelable PowerEntityStateInfo {
+    /**
+     * ID corresponding to the state. Unique for a given PowerEntityStateSpace
+     */
+    int powerEntityStateId;
+    /**
+     * Name of the state (opaque to the framework)
+     */
+    String powerEntityStateName;
+}
+
diff --git a/powerstats/aidl/android/hardware/powerstats/PowerEntityStateResidencyData.aidl b/powerstats/aidl/android/hardware/powerstats/PowerEntityStateResidencyData.aidl
new file mode 100644
index 0000000..a738457
--- /dev/null
+++ b/powerstats/aidl/android/hardware/powerstats/PowerEntityStateResidencyData.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.powerstats;
+
+/**
+ * Contains residency data for a single state
+ */
+@VintfStability
+parcelable PowerEntityStateResidencyData {
+    /**
+     * Unique ID of the corresponding PowerEntityStateInfo
+     */
+    int powerEntityStateId;
+    /**
+     * Total time in milliseconds that the corresponding PowerEntity resided
+     * in this state since the PowerEntity was reset
+     */
+    long totalTimeInStateMs;
+    /**
+     * Total number of times that the state was entered since the corresponding
+     * PowerEntity was reset
+     */
+    long totalStateEntryCount;
+    /**
+     * Last time this state was entered. Time in milliseconds since the
+     * corresponding PowerEntity was reset
+     */
+    long lastEntryTimestampMs;
+}
+
diff --git a/powerstats/aidl/android/hardware/powerstats/PowerEntityStateResidencyResult.aidl b/powerstats/aidl/android/hardware/powerstats/PowerEntityStateResidencyResult.aidl
new file mode 100644
index 0000000..555ae4c
--- /dev/null
+++ b/powerstats/aidl/android/hardware/powerstats/PowerEntityStateResidencyResult.aidl
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.powerstats;
+
+import android.hardware.powerstats.PowerEntityStateResidencyData;
+
+@VintfStability
+parcelable PowerEntityStateResidencyResult {
+    /**
+     * Unique ID of the corresponding PowerEntity
+     */
+    int powerEntityId;
+    /**
+     * Residency data for each state the PowerEntity's state space
+     */
+    PowerEntityStateResidencyData[] stateResidencyData;
+}
+
diff --git a/powerstats/aidl/android/hardware/powerstats/RailInfo.aidl b/powerstats/aidl/android/hardware/powerstats/RailInfo.aidl
new file mode 100644
index 0000000..4c05bfe
--- /dev/null
+++ b/powerstats/aidl/android/hardware/powerstats/RailInfo.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.powerstats;
+
+@VintfStability
+parcelable RailInfo {
+    /**
+     * Index corresponding to the rail
+     */
+    int railIndex;
+    /**
+     * Name of the rail (opaque to the framework)
+     */
+    String railName;
+    /**
+     * Name of the subsystem to which this rail belongs (opaque to the framework)
+     */
+    String subsysName;
+    /**
+     * Hardware sampling rate in Hz
+     */
+    int samplingRateHz;
+}
+
diff --git a/powerstats/aidl/default/Android.bp b/powerstats/aidl/default/Android.bp
new file mode 100644
index 0000000..caecd88
--- /dev/null
+++ b/powerstats/aidl/default/Android.bp
@@ -0,0 +1,30 @@
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_binary {
+    name: "android.hardware.powerstats-service.example",
+    relative_install_path: "hw",
+    init_rc: ["powerstats-default.rc"],
+    vintf_fragments: ["powerstats-default.xml"],
+    vendor: true,
+    shared_libs: [
+        "libbase",
+        "libbinder_ndk",
+        "android.hardware.powerstats-ndk_platform",
+    ],
+    srcs: [
+        "main.cpp",
+        "PowerStats.cpp",
+    ],
+}
diff --git a/powerstats/aidl/default/PowerStats.cpp b/powerstats/aidl/default/PowerStats.cpp
new file mode 100644
index 0000000..8d6a0ee
--- /dev/null
+++ b/powerstats/aidl/default/PowerStats.cpp
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PowerStats.h"
+
+#include <android-base/logging.h>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace powerstats {
+
+ndk::ScopedAStatus PowerStats::getEnergyData(const std::vector<int32_t>& in_railIndices,
+                                             std::vector<EnergyData>* _aidl_return) {
+    (void)in_railIndices;
+    (void)_aidl_return;
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus PowerStats::getPowerEntityInfo(std::vector<PowerEntityInfo>* _aidl_return) {
+    (void)_aidl_return;
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus PowerStats::getPowerEntityStateResidencyData(
+        const std::vector<int32_t>& in_powerEntityIds,
+        std::vector<PowerEntityStateResidencyResult>* _aidl_return) {
+    (void)in_powerEntityIds;
+    (void)_aidl_return;
+    return ndk::ScopedAStatus::ok();
+}
+
+ndk::ScopedAStatus PowerStats::getRailInfo(std::vector<RailInfo>* _aidl_return) {
+    (void)_aidl_return;
+    return ndk::ScopedAStatus::ok();
+}
+
+}  // namespace powerstats
+}  // namespace hardware
+}  // namespace android
+}  // namespace aidl
diff --git a/powerstats/aidl/default/PowerStats.h b/powerstats/aidl/default/PowerStats.h
new file mode 100644
index 0000000..49240cb
--- /dev/null
+++ b/powerstats/aidl/default/PowerStats.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <aidl/android/hardware/powerstats/BnPowerStats.h>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace powerstats {
+
+class PowerStats : public BnPowerStats {
+  public:
+    PowerStats() = default;
+    ndk::ScopedAStatus getEnergyData(const std::vector<int32_t>& in_railIndices,
+                                     std::vector<EnergyData>* _aidl_return) override;
+    ndk::ScopedAStatus getPowerEntityInfo(std::vector<PowerEntityInfo>* _aidl_return) override;
+    ndk::ScopedAStatus getPowerEntityStateResidencyData(
+            const std::vector<int32_t>& in_powerEntityIds,
+            std::vector<PowerEntityStateResidencyResult>* _aidl_return) override;
+    ndk::ScopedAStatus getRailInfo(std::vector<RailInfo>* _aidl_return) override;
+};
+
+}  // namespace powerstats
+}  // namespace hardware
+}  // namespace android
+}  // namespace aidl
diff --git a/powerstats/aidl/default/main.cpp b/powerstats/aidl/default/main.cpp
new file mode 100644
index 0000000..1496805
--- /dev/null
+++ b/powerstats/aidl/default/main.cpp
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PowerStats.h"
+
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+using aidl::android::hardware::powerstats::PowerStats;
+
+int main() {
+    ABinderProcess_setThreadPoolMaxThreadCount(0);
+    std::shared_ptr<PowerStats> p = ndk::SharedRefBase::make<PowerStats>();
+
+    const std::string instance = std::string() + PowerStats::descriptor + "/default";
+    binder_status_t status = AServiceManager_addService(p->asBinder().get(), instance.c_str());
+    CHECK(status == STATUS_OK);
+
+    ABinderProcess_joinThreadPool();
+    return EXIT_FAILURE;  // should not reach
+}
diff --git a/powerstats/aidl/default/powerstats-default.rc b/powerstats/aidl/default/powerstats-default.rc
new file mode 100644
index 0000000..9b04be3
--- /dev/null
+++ b/powerstats/aidl/default/powerstats-default.rc
@@ -0,0 +1,4 @@
+service vendor.powerstats-default /vendor/bin/hw/android.hardware.powerstats-service.example
+    class hal
+    user system
+    group system
diff --git a/powerstats/aidl/default/powerstats-default.xml b/powerstats/aidl/default/powerstats-default.xml
new file mode 100644
index 0000000..e07513d
--- /dev/null
+++ b/powerstats/aidl/default/powerstats-default.xml
@@ -0,0 +1,6 @@
+<manifest version="1.0" type="device">
+    <hal format="aidl">
+        <name>android.hardware.powerstats</name>
+        <fqname>IPowerStats/default</fqname>
+    </hal>
+</manifest>
diff --git a/powerstats/aidl/vts/Android.bp b/powerstats/aidl/vts/Android.bp
new file mode 100644
index 0000000..c61022e
--- /dev/null
+++ b/powerstats/aidl/vts/Android.bp
@@ -0,0 +1,32 @@
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_test {
+    name: "VtsHalPowerStatsTargetTest",
+    defaults: [
+        "VtsHalTargetTestDefaults",
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: ["VtsHalPowerStatsTargetTest.cpp"],
+    shared_libs: [
+        "libbinder_ndk",
+    ],
+    static_libs: [
+        "android.hardware.powerstats-ndk_platform",
+    ],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+}
diff --git a/powerstats/aidl/vts/VtsHalPowerStatsTargetTest.cpp b/powerstats/aidl/vts/VtsHalPowerStatsTargetTest.cpp
new file mode 100644
index 0000000..b3cd233
--- /dev/null
+++ b/powerstats/aidl/vts/VtsHalPowerStatsTargetTest.cpp
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <aidl/Gtest.h>
+#include <aidl/Vintf.h>
+
+#include <aidl/android/hardware/powerstats/IPowerStats.h>
+#include <android-base/properties.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+
+using aidl::android::hardware::powerstats::EnergyData;
+using aidl::android::hardware::powerstats::IPowerStats;
+using aidl::android::hardware::powerstats::PowerEntityInfo;
+using aidl::android::hardware::powerstats::PowerEntityStateResidencyResult;
+using aidl::android::hardware::powerstats::RailInfo;
+using ndk::SpAIBinder;
+
+class PowerStatsAidl : public testing::TestWithParam<std::string> {
+  public:
+    virtual void SetUp() override {
+        powerstats = IPowerStats::fromBinder(
+                SpAIBinder(AServiceManager_waitForService(GetParam().c_str())));
+        ASSERT_NE(nullptr, powerstats.get());
+    }
+
+    std::shared_ptr<IPowerStats> powerstats;
+};
+
+TEST_P(PowerStatsAidl, TestGetEnergyData) {
+    std::vector<EnergyData> data;
+    ASSERT_TRUE(powerstats->getEnergyData({}, &data).isOk());
+}
+
+// Each PowerEntity must have a valid name
+TEST_P(PowerStatsAidl, ValidatePowerEntityNames) {
+    std::vector<PowerEntityInfo> infos;
+    ASSERT_TRUE(powerstats->getPowerEntityInfo(&infos).isOk());
+
+    for (auto info : infos) {
+        EXPECT_NE(info.powerEntityName, "");
+    }
+}
+
+// Each power entity must have a unique name
+TEST_P(PowerStatsAidl, ValidatePowerEntityUniqueNames) {
+    std::vector<PowerEntityInfo> infos;
+    ASSERT_TRUE(powerstats->getPowerEntityInfo(&infos).isOk());
+
+    std::set<std::string> names;
+    for (auto info : infos) {
+        EXPECT_TRUE(names.insert(info.powerEntityName).second);
+    }
+}
+
+// Each PowerEntity must have a unique ID
+TEST_P(PowerStatsAidl, ValidatePowerEntityIds) {
+    std::vector<PowerEntityInfo> infos;
+    ASSERT_TRUE(powerstats->getPowerEntityInfo(&infos).isOk());
+
+    std::set<int32_t> ids;
+    for (auto info : infos) {
+        EXPECT_TRUE(ids.insert(info.powerEntityId).second);
+    }
+}
+
+// Each state must have a valid name
+TEST_P(PowerStatsAidl, ValidateStateNames) {
+    std::vector<PowerEntityInfo> infos;
+    ASSERT_TRUE(powerstats->getPowerEntityInfo(&infos).isOk());
+
+    for (auto info : infos) {
+        for (auto state : info.states) {
+            EXPECT_NE(state.powerEntityStateName, "");
+        }
+    }
+}
+
+// Each state must have a name that is unique to the given PowerEntity
+TEST_P(PowerStatsAidl, ValidateStateUniqueNames) {
+    std::vector<PowerEntityInfo> infos;
+    ASSERT_TRUE(powerstats->getPowerEntityInfo(&infos).isOk());
+
+    for (auto info : infos) {
+        std::set<std::string> stateNames;
+        for (auto state : info.states) {
+            EXPECT_TRUE(stateNames.insert(state.powerEntityStateName).second);
+        }
+    }
+}
+
+// Each state must have an ID that is unique to the given PowerEntity
+TEST_P(PowerStatsAidl, ValidateStateUniqueIds) {
+    std::vector<PowerEntityInfo> infos;
+    ASSERT_TRUE(powerstats->getPowerEntityInfo(&infos).isOk());
+
+    for (auto info : infos) {
+        std::set<uint32_t> stateIds;
+        for (auto state : info.states) {
+            EXPECT_TRUE(stateIds.insert(state.powerEntityStateId).second);
+        }
+    }
+}
+
+TEST_P(PowerStatsAidl, TestGetPowerEntityStateResidencyData) {
+    std::vector<PowerEntityStateResidencyResult> data;
+    ASSERT_TRUE(powerstats->getPowerEntityStateResidencyData({}, &data).isOk());
+}
+
+TEST_P(PowerStatsAidl, TestGetRailInfo) {
+    std::vector<RailInfo> info;
+    ASSERT_TRUE(powerstats->getRailInfo(&info).isOk());
+}
+
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(PowerStatsAidl);
+INSTANTIATE_TEST_SUITE_P(
+        PowerStats, PowerStatsAidl,
+        testing::ValuesIn(android::getAidlHalInstanceNames(IPowerStats::descriptor)),
+        android::PrintInstanceNameToString);
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    ABinderProcess_setThreadPoolMaxThreadCount(1);
+    ABinderProcess_startThreadPool();
+    return RUN_ALL_TESTS();
+}
diff --git a/radio/1.0/vts/functional/vts_test_util.cpp b/radio/1.0/vts/functional/vts_test_util.cpp
index 7a21a40..9a2d089 100644
--- a/radio/1.0/vts/functional/vts_test_util.cpp
+++ b/radio/1.0/vts/functional/vts_test_util.cpp
@@ -17,6 +17,7 @@
 
 #include <vts_test_util.h>
 #include <iostream>
+#include "VtsCoreUtil.h"
 
 int GetRandomSerialNumber() {
     return rand();
@@ -78,4 +79,24 @@
     __android_log_print(ANDROID_LOG_INFO, LOG_TAG, "Feature %s: %ssupported", feature,
                         hasFeature ? "" : "not ");
     return hasFeature;
+}
+
+bool isDsDsEnabled() {
+    return testing::checkSubstringInCommandOutput("getprop persist.radio.multisim.config", "dsds");
+}
+
+bool isTsTsEnabled() {
+    return testing::checkSubstringInCommandOutput("getprop persist.radio.multisim.config", "tsts");
+}
+
+bool isVoiceInService(RegState state) {
+    return ::android::hardware::radio::V1_0::RegState::REG_HOME == state ||
+           ::android::hardware::radio::V1_0::RegState::REG_ROAMING == state;
+}
+
+bool isVoiceEmergencyOnly(RegState state) {
+    return ::android::hardware::radio::V1_0::RegState::NOT_REG_MT_NOT_SEARCHING_OP_EM == state ||
+           ::android::hardware::radio::V1_0::RegState::NOT_REG_MT_SEARCHING_OP_EM == state ||
+           ::android::hardware::radio::V1_0::RegState::REG_DENIED_EM == state ||
+           ::android::hardware::radio::V1_0::RegState::UNKNOWN_EM == state;
 }
\ No newline at end of file
diff --git a/radio/1.0/vts/functional/vts_test_util.h b/radio/1.0/vts/functional/vts_test_util.h
index df8dd77..1625f11 100644
--- a/radio/1.0/vts/functional/vts_test_util.h
+++ b/radio/1.0/vts/functional/vts_test_util.h
@@ -21,6 +21,7 @@
 #include <gtest/gtest.h>
 
 using ::android::hardware::radio::V1_0::RadioError;
+using ::android::hardware::radio::V1_0::RegState;
 using ::android::hardware::radio::V1_0::SapResultCode;
 using namespace std;
 
@@ -55,3 +56,23 @@
  * Check if device supports feature.
  */
 bool deviceSupportsFeature(const char* feature);
+
+/*
+ * Check if device is in DSDS.
+ */
+bool isDsDsEnabled();
+
+/*
+ * Check if device is in TSTS.
+ */
+bool isTsTsEnabled();
+
+/*
+ * Check if voice status is in emergency only.
+ */
+bool isVoiceEmergencyOnly(RegState state);
+
+/*
+ * Check if voice status is in service.
+ */
+bool isVoiceInService(RegState state);
\ No newline at end of file
diff --git a/radio/1.4/vts/functional/radio_hidl_hal_api.cpp b/radio/1.4/vts/functional/radio_hidl_hal_api.cpp
index 3ba9b9d..1b254a1 100644
--- a/radio/1.4/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.4/vts/functional/radio_hidl_hal_api.cpp
@@ -56,7 +56,21 @@
     EXPECT_EQ(serial, radioRsp_v1_4->rspInfo.serial);
 
     ALOGI("emergencyDial, rspInfo.error = %s\n", toString(radioRsp_v1_4->rspInfo.error).c_str());
-    EXPECT_EQ(RadioError::NONE, radioRsp_v1_4->rspInfo.error);
+
+    ::android::hardware::radio::V1_0::RadioError rspEmergencyDial = radioRsp_v1_4->rspInfo.error;
+    // In DSDS or TSTS, we only check the result if the current slot is IN_SERVICE
+    // or Emergency_Only.
+    if (isDsDsEnabled() || isTsTsEnabled()) {
+        serial = GetRandomSerialNumber();
+        radio_v1_4->getVoiceRegistrationState(serial);
+        EXPECT_EQ(std::cv_status::no_timeout, wait());
+        if (isVoiceEmergencyOnly(radioRsp_v1_4->voiceRegResp.regState) ||
+            isVoiceInService(radioRsp_v1_4->voiceRegResp.regState)) {
+            EXPECT_EQ(RadioError::NONE, rspEmergencyDial);
+        }
+    } else {
+        EXPECT_EQ(RadioError::NONE, rspEmergencyDial);
+    }
 
     // Give some time for modem to establish the emergency call channel.
     sleep(MODEM_EMERGENCY_CALL_ESTABLISH_TIME);
@@ -95,8 +109,21 @@
 
     ALOGI("emergencyDial_withServices, rspInfo.error = %s\n",
           toString(radioRsp_v1_4->rspInfo.error).c_str());
-    EXPECT_EQ(RadioError::NONE, radioRsp_v1_4->rspInfo.error);
+    ::android::hardware::radio::V1_0::RadioError rspEmergencyDial = radioRsp_v1_4->rspInfo.error;
 
+    // In DSDS or TSTS, we only check the result if the current slot is IN_SERVICE
+    // or Emergency_Only.
+    if (isDsDsEnabled() || isTsTsEnabled()) {
+        serial = GetRandomSerialNumber();
+        radio_v1_4->getVoiceRegistrationState(serial);
+        EXPECT_EQ(std::cv_status::no_timeout, wait());
+        if (isVoiceEmergencyOnly(radioRsp_v1_4->voiceRegResp.regState) ||
+            isVoiceInService(radioRsp_v1_4->voiceRegResp.regState)) {
+            EXPECT_EQ(RadioError::NONE, rspEmergencyDial);
+        }
+    } else {
+        EXPECT_EQ(RadioError::NONE, rspEmergencyDial);
+    }
     // Give some time for modem to establish the emergency call channel.
     sleep(MODEM_EMERGENCY_CALL_ESTABLISH_TIME);
 
@@ -134,7 +161,21 @@
 
     ALOGI("emergencyDial_withEmergencyRouting, rspInfo.error = %s\n",
           toString(radioRsp_v1_4->rspInfo.error).c_str());
-    EXPECT_EQ(RadioError::NONE, radioRsp_v1_4->rspInfo.error);
+    ::android::hardware::radio::V1_0::RadioError rspEmergencyDial = radioRsp_v1_4->rspInfo.error;
+
+    // In DSDS or TSTS, we only check the result if the current slot is IN_SERVICE
+    // or Emergency_Only.
+    if (isDsDsEnabled() || isTsTsEnabled()) {
+        serial = GetRandomSerialNumber();
+        radio_v1_4->getVoiceRegistrationState(serial);
+        EXPECT_EQ(std::cv_status::no_timeout, wait());
+        if (isVoiceEmergencyOnly(radioRsp_v1_4->voiceRegResp.regState) ||
+            isVoiceInService(radioRsp_v1_4->voiceRegResp.regState)) {
+            EXPECT_EQ(RadioError::NONE, rspEmergencyDial);
+        }
+    } else {
+        EXPECT_EQ(RadioError::NONE, rspEmergencyDial);
+    }
 
     // Give some time for modem to establish the emergency call channel.
     sleep(MODEM_EMERGENCY_CALL_ESTABLISH_TIME);
diff --git a/radio/1.4/vts/functional/radio_hidl_hal_utils_v1_4.h b/radio/1.4/vts/functional/radio_hidl_hal_utils_v1_4.h
index 53a5845..8eee811 100644
--- a/radio/1.4/vts/functional/radio_hidl_hal_utils_v1_4.h
+++ b/radio/1.4/vts/functional/radio_hidl_hal_utils_v1_4.h
@@ -64,6 +64,7 @@
 
     // Call
     hidl_vec<::android::hardware::radio::V1_2::Call> currentCalls;
+    ::android::hardware::radio::V1_2::VoiceRegStateResult voiceRegResp;
 
     // Modem
     bool isModemEnabled;
diff --git a/radio/1.4/vts/functional/radio_response.cpp b/radio/1.4/vts/functional/radio_response.cpp
index d0aae47..3e93bf4 100644
--- a/radio/1.4/vts/functional/radio_response.cpp
+++ b/radio/1.4/vts/functional/radio_response.cpp
@@ -762,8 +762,9 @@
 
 Return<void> RadioResponse_v1_4::getVoiceRegistrationStateResponse_1_2(
         const RadioResponseInfo& info,
-        const ::android::hardware::radio::V1_2::VoiceRegStateResult& /*voiceRegResponse*/) {
+        const ::android::hardware::radio::V1_2::VoiceRegStateResult& voiceRegResponse) {
     rspInfo = info;
+    voiceRegResp = voiceRegResponse;
     parent_v1_4.notify(info.serial);
     return Void();
 }
diff --git a/radio/1.6/Android.bp b/radio/1.6/Android.bp
index b363f57..fc3191f 100644
--- a/radio/1.6/Android.bp
+++ b/radio/1.6/Android.bp
@@ -17,6 +17,7 @@
         "android.hardware.radio@1.4",
         "android.hardware.radio@1.5",
         "android.hidl.base@1.0",
+        "android.hidl.safe_union@1.0",
     ],
     gen_java: true,
 }
diff --git a/radio/1.6/IRadio.hal b/radio/1.6/IRadio.hal
index a084b92..c3f15f4 100644
--- a/radio/1.6/IRadio.hal
+++ b/radio/1.6/IRadio.hal
@@ -16,7 +16,11 @@
 
 package android.hardware.radio@1.6;
 
+import @1.2::DataRequestReason;
 import @1.5::IRadio;
+import @1.5::AccessNetwork;
+import @1.5::DataProfileInfo;
+import @1.5::LinkAddress;
 
 /**
  * This interface is used by telephony and telecom to talk to cellular radio.
@@ -24,7 +28,63 @@
  * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
  * duration of a method call. If clients provide colliding serials (including passing the same
  * serial to different methods), multiple responses (one for each method call) must still be served.
- * setResponseFunctions must work with @1.6:IRadioResponse and @1.6::IRadioIndication.
+ * setResponseFunctions must work with @1.6::IRadioResponse and @1.6::IRadioIndication.
  */
 interface IRadio extends @1.5::IRadio {
+    /**
+     * Returns the data call list. An entry is added when a setupDataCall() is issued and removed
+     * on a deactivateDataCall(). The list is emptied when setRadioPower()  off/on issued or when
+     * the vendor HAL or modem crashes.
+     *
+     * @param serial Serial number of request.
+     *
+     * Response function is IRadioResponse.getDataCallListResponse_1_6()
+     */
+    oneway getDataCallList_1_6(int32_t serial);
+
+    /**
+     * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
+     * the data connection must be added to data calls and a unsolDataCallListChanged() must be
+     * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
+     * lost due to many factors, including deactivateDataCall() being issued, the radio powered
+     * off, reception lost or even transient factors like congestion. This data call list is
+     * returned by getDataCallList() and dataCallListChanged().
+     *
+     * The Radio is expected to:
+     *   - Create one data call context.
+     *   - Create and configure a dedicated interface for the context.
+     *   - The interface must be point to point.
+     *   - The interface is configured with one or more addresses and is capable of sending and
+     *     receiving packets. The format is IP address with optional "/" prefix length
+     *     (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
+     *     "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
+     *     the prefix length is absent, then the addresses are assumed to be point to point with
+     *     IPv4 with prefix length 32 or IPv6 with prefix length 128.
+     *   - Must not modify routing configuration related to this interface; routing management is
+     *     exclusively within the purview of the Android OS.
+     *   - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
+     *     in the response of getDataRegistrationState.
+     *
+     * @param serial Serial number of request.
+     * @param accessNetwork The access network to setup the data call. If the data connection cannot
+     *     be established on the specified access network then it should be responded with an error.
+     * @param dataProfileInfo Data profile info.
+     * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
+     * @param reason The request reason. Must be DataRequestReason:NORMAL or
+     *     DataRequestReason:HANDOVER.
+     * @param addresses If the reason is DataRequestReason:HANDOVER, this indicates the list of link
+     *     addresses of the existing data connection. This parameter must be ignored unless reason
+     *     is DataRequestReason:HANDOVER.
+     * @param dnses If the reason is DataRequestReason:HANDOVER, this indicates the list of DNS
+     *     addresses of the existing data connection. The format is defined in RFC-4291 section 2.2.
+     *     For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless reason
+     *     is DataRequestReason:HANDOVER.
+     *
+     * Response function is IRadioResponse.setupDataCallResponse_1_6()
+     *
+     * Note this API is the same as the 1.5
+     */
+    oneway setupDataCall_1_6(int32_t serial, AccessNetwork accessNetwork,
+            DataProfileInfo dataProfileInfo, bool roamingAllowed,
+            DataRequestReason reason, vec<LinkAddress> addresses, vec<string> dnses);
 };
diff --git a/radio/1.6/IRadioIndication.hal b/radio/1.6/IRadioIndication.hal
index 9951dd9..d9aaa38 100644
--- a/radio/1.6/IRadioIndication.hal
+++ b/radio/1.6/IRadioIndication.hal
@@ -16,10 +16,28 @@
 
 package android.hardware.radio@1.6;
 
+import @1.0::RadioIndicationType;
 import @1.5::IRadioIndication;
 
 /**
  * Interface declaring unsolicited radio indications.
  */
 interface IRadioIndication extends @1.5::IRadioIndication {
+
+    /**
+     * Indicates data call contexts have changed.
+     *
+     * This indication is updated from IRadioIndication@1.5 to report the @1.6 version of
+     * SetupDataCallResult.
+     *
+     * @param type Type of radio indication
+     * @param dcList Array of SetupDataCallResult identical to that returned by
+     *        IRadio.getDataCallList(). It is the complete list of current data contexts including
+     *        new contexts that have been activated. A data call is only removed from this list
+     *        when any of the below conditions is matched.
+     *        1. The framework sends a IRadio.deactivateDataCall().
+     *        2. The radio is powered off/on.
+     *        3. Unsolicited disconnect from either modem or network side.
+     */
+    oneway dataCallListChanged_1_6(RadioIndicationType type, vec<SetupDataCallResult> dcList);
 };
diff --git a/radio/1.6/IRadioResponse.hal b/radio/1.6/IRadioResponse.hal
index a67aa3f..e91b9c1 100644
--- a/radio/1.6/IRadioResponse.hal
+++ b/radio/1.6/IRadioResponse.hal
@@ -16,10 +16,42 @@
 
 package android.hardware.radio@1.6;
 
+import @1.0::RadioResponseInfo;
 import @1.5::IRadioResponse;
+import @1.6::SetupDataCallResult;
 
 /**
  * Interface declaring response functions to solicited radio requests.
  */
 interface IRadioResponse extends @1.5::IRadioResponse {
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param dcResponse SetupDataCallResult defined in types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE must be returned on both success and failure of setup with the
+     *              DataCallResponse.status containing the actual status
+     *              For all other errors the DataCallResponse is ignored.
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:OP_NOT_ALLOWED_BEFORE_REG_TO_NW
+     *   RadioError:OP_NOT_ALLOWED_DURING_VOICE_CALL
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NO_RESOURCES if the vendor is unable handle due to resources
+     *              are full.
+     *   RadioError:SIM_ABSENT
+     */
+    oneway setupDataCallResponse_1_6(RadioResponseInfo info, SetupDataCallResult dcResponse);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param dcResponse List of SetupDataCallResult as defined in types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:SIM_ABSENT
+     */
+    oneway getDataCallListResponse_1_6(RadioResponseInfo info, vec<SetupDataCallResult> dcResponse);
 };
diff --git a/radio/1.6/types.hal b/radio/1.6/types.hal
index 3395619..fbcbe97 100644
--- a/radio/1.6/types.hal
+++ b/radio/1.6/types.hal
@@ -15,3 +15,176 @@
  */
 
 package android.hardware.radio@1.6;
+
+import @1.5::SetupDataCallResult;
+
+import android.hidl.safe_union@1.0::Monostate;
+
+struct QosBandwidth {
+    /** Maximum bit rate possible on the bearer */
+    int32_t maxBitrateKbps;
+    /** Minimum bit rate that is guaranteed to be provided by the network */
+    int32_t guaranteedBitrateKbps;
+};
+
+/** LTE/EPS Quality of Service parameters as per 3gpp spec 24.301 sec 9.9.4.3. */
+struct EpsQos {
+    /**
+     * Quality of Service Class Identifier (QCI), see 3GPP TS 23.203 and 29.212.
+     * The allowed values are standard values(1-9, 65-68, 69-70, 75, 79-80, 82-85)
+     * defined in the spec and operator specific values in the range 128-254.
+     */
+    uint16_t qci;
+    QosBandwidth downlink;
+    QosBandwidth uplink;
+};
+
+/** 5G Quality of Service parameters as per 3gpp spec 24.501 sec 9.11.4.12 */
+struct NrQos {
+    /**
+     * 5G QOS Identifier (5QI), see 3GPP TS 24.501 and 23.501.
+     * The allowed values are standard values(1-9, 65-68, 69-70, 75, 79-80, 82-85)
+     * defined in the spec and operator specific values in the range 128-254.
+     */
+    uint16_t fiveQi;
+    QosBandwidth downlink;
+    QosBandwidth uplink;
+    /**
+     * QOS flow identifier of the QOS flow description in the
+     * range of QosFlowIdRange::MIN to QosFlowIdRange::MAX
+     */
+    uint8_t qfi;
+    uint16_t averagingWindowMs;
+};
+
+/** Allowed values for 5G QOS flow identifier */
+enum QosFlowIdRange : uint8_t {
+    MIN = 1,
+    MAX = 63
+};
+
+/** EPS or NR QOS parameters */
+safe_union Qos {
+    Monostate noinit;
+    EpsQos eps;
+    NrQos nr;
+};
+
+/**
+ * Next header protocol numbers defined by IANA, RFC 5237
+ */
+enum QosProtocol : int32_t {
+    /** No protocol specified */
+    UNSPECIFIED = -1,
+    /** Transmission Control Protocol */
+    TCP = 6,
+    /** User Datagram Protocol */
+    UDP = 17,
+    /** Encapsulating Security Payload Protocol */
+    ESP = 50,
+    /** Authentication Header */
+    AH = 51,
+};
+
+enum QosFilterDirection : int32_t {
+    DOWNLINK = 0,
+    UPLINK = 1,
+    BIDIRECTIONAL = 2,
+};
+
+/** Allowed port numbers */
+enum QosPortRange : int32_t {
+    MIN = 20,
+    MAX = 65535
+};
+
+/**
+ * Defines range of ports. start and end are the first and last port numbers
+ * (inclusive) in the range. Both start and end are in QosPortRange.MIN to
+ * QosPortRange.MAX range. A single port shall be represented by the same
+ * start and end value.
+ */
+struct PortRange {
+    int32_t start;
+    int32_t end;
+};
+
+/** Port is optional, contains either single port or range of ports */
+safe_union MaybePort {
+    Monostate noinit;
+    PortRange range;
+};
+
+/** See 3gpp 24.008 10.5.6.12 and 3gpp 24.501 9.11.4.13 */
+struct QosFilter {
+    /**
+     * Local and remote IP addresses, typically one IPv4 or one IPv6
+     * or one of each. Addresses could be with optional "/" prefix
+     * length, e.g.,"192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
+     * If the prefix length is absent the addresses are assumed to be
+     * point to point with IPv4 having a prefix length of 32 and
+     * IPv6 128.
+     */
+    vec<string> localAddresses;
+    vec<string> remoteAddresses;
+
+    /** Local and remote port/ranges */
+    MaybePort localPort;
+    MaybePort remotePort;
+
+    /** QoS protocol */
+    QosProtocol protocol;
+
+    /** Type of service value or mask as defined in RFC 1349 */
+    safe_union TypeOfService {
+         Monostate noinit;
+         uint8_t value;
+    } tos;
+
+    /** IPv6 flow label as defined in RFC 6437 */
+    safe_union Ipv6FlowLabel {
+         Monostate noinit;
+         uint32_t value;
+    } flowLabel;
+
+    /** IPSec security parameter index */
+    safe_union IpsecSpi {
+         Monostate noinit;
+         uint32_t value;
+    } spi;
+
+    /** Filter direction */
+    QosFilterDirection direction;
+
+    /**
+     * Specified the order in which the filter needs to be matched.
+     * A lower numerical(positive) value has a higher precedence.
+     * Set -1 when unspecified.
+     */
+    int32_t precedence;
+};
+
+/** QOS session associated with a dedicated bearer */
+struct QosSession {
+    /** Unique ID of the QoS session within the data call */
+    int32_t qosSessionId;
+
+    /** QOS attributes */
+    Qos qos;
+
+    /** List of QOS filters associated with this session */
+    vec<QosFilter> qosFilters;
+};
+
+struct SetupDataCallResult {
+    @1.5::SetupDataCallResult base;
+
+    /** Default bearer QoS. Applicable to LTE and NR */
+    Qos defaultQos;
+
+    /**
+     * Active QOS sessions of the dedicated bearers. Applicable to
+     * PDNs that support dedicated bearers.
+     */
+    vec<QosSession> qosSessions;
+};
diff --git a/radio/1.6/vts/functional/radio_hidl_hal_api.cpp b/radio/1.6/vts/functional/radio_hidl_hal_api.cpp
index 8ed56ed..0bfce4d 100644
--- a/radio/1.6/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.6/vts/functional/radio_hidl_hal_api.cpp
@@ -17,3 +17,60 @@
 #include <radio_hidl_hal_utils_v1_6.h>
 
 #define ASSERT_OK(ret) ASSERT_TRUE(ret.isOk())
+
+/*
+ * Test IRadio.setupDataCall_1_6() for the response returned.
+ */
+TEST_P(RadioHidlTest_v1_6, setupDataCall_1_6) {
+    serial = GetRandomSerialNumber();
+
+    ::android::hardware::radio::V1_5::AccessNetwork accessNetwork =
+            ::android::hardware::radio::V1_5::AccessNetwork::EUTRAN;
+
+    android::hardware::radio::V1_5::DataProfileInfo dataProfileInfo;
+    memset(&dataProfileInfo, 0, sizeof(dataProfileInfo));
+    dataProfileInfo.profileId = DataProfileId::DEFAULT;
+    dataProfileInfo.apn = hidl_string("internet");
+    dataProfileInfo.protocol = PdpProtocolType::IP;
+    dataProfileInfo.roamingProtocol = PdpProtocolType::IP;
+    dataProfileInfo.authType = ApnAuthType::NO_PAP_NO_CHAP;
+    dataProfileInfo.user = hidl_string("username");
+    dataProfileInfo.password = hidl_string("password");
+    dataProfileInfo.type = DataProfileInfoType::THREE_GPP;
+    dataProfileInfo.maxConnsTime = 300;
+    dataProfileInfo.maxConns = 20;
+    dataProfileInfo.waitTime = 0;
+    dataProfileInfo.enabled = true;
+    dataProfileInfo.supportedApnTypesBitmap = 320;
+    dataProfileInfo.bearerBitmap = 161543;
+    dataProfileInfo.mtuV4 = 0;
+    dataProfileInfo.mtuV6 = 0;
+    dataProfileInfo.preferred = true;
+    dataProfileInfo.persistent = false;
+
+    bool roamingAllowed = false;
+
+    std::vector<::android::hardware::radio::V1_5::LinkAddress> addresses = {};
+    std::vector<hidl_string> dnses = {};
+
+    ::android::hardware::radio::V1_2::DataRequestReason reason =
+            ::android::hardware::radio::V1_2::DataRequestReason::NORMAL;
+
+    Return<void> res = radio_v1_6->setupDataCall_1_6(serial, accessNetwork, dataProfileInfo,
+                                                     roamingAllowed, reason, addresses, dnses);
+    ASSERT_OK(res);
+
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+    EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
+    EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
+
+    if (cardStatus.base.base.base.cardState == CardState::ABSENT) {
+        ASSERT_TRUE(CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                                     {RadioError::SIM_ABSENT, RadioError::RADIO_NOT_AVAILABLE,
+                                      RadioError::OP_NOT_ALLOWED_BEFORE_REG_TO_NW}));
+    } else if (cardStatus.base.base.base.cardState == CardState::PRESENT) {
+        ASSERT_TRUE(CheckAnyOfErrors(radioRsp_v1_6->rspInfo.error,
+                                     {RadioError::NONE, RadioError::RADIO_NOT_AVAILABLE,
+                                      RadioError::OP_NOT_ALLOWED_BEFORE_REG_TO_NW}));
+    }
+}
diff --git a/radio/1.6/vts/functional/radio_hidl_hal_test.cpp b/radio/1.6/vts/functional/radio_hidl_hal_test.cpp
index e9a4542..114fd1a 100644
--- a/radio/1.6/vts/functional/radio_hidl_hal_test.cpp
+++ b/radio/1.6/vts/functional/radio_hidl_hal_test.cpp
@@ -72,3 +72,9 @@
     count_--;
     return status;
 }
+
+void RadioHidlTest_v1_6::getDataCallList() {
+    serial = GetRandomSerialNumber();
+    radio_v1_6->getDataCallList_1_6(serial);
+    EXPECT_EQ(std::cv_status::no_timeout, wait());
+}
diff --git a/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h b/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h
index 66846ea..95a2d09 100644
--- a/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h
+++ b/radio/1.6/vts/functional/radio_hidl_hal_utils_v1_6.h
@@ -602,6 +602,13 @@
             const ::android::hardware::radio::V1_5::CardStatus& card_status);
 
     /* 1.6 Api */
+    Return<void> setupDataCallResponse_1_6(
+            const RadioResponseInfo& info,
+            const android::hardware::radio::V1_6::SetupDataCallResult& dcResponse);
+
+    Return<void> getDataCallListResponse_1_6(
+            const RadioResponseInfo& info,
+            const hidl_vec<::android::hardware::radio::V1_6::SetupDataCallResult>& dcResponse);
 };
 
 /* Callback class for radio indication */
@@ -614,6 +621,9 @@
     virtual ~RadioIndication_v1_6() = default;
 
     /* 1.6 Api */
+    Return<void> dataCallListChanged_1_6(
+            RadioIndicationType type,
+            const hidl_vec<::android::hardware::radio::V1_6::SetupDataCallResult>& dcList);
 
     /* 1.5 Api */
     Return<void> uiccApplicationsEnablementChanged(RadioIndicationType type, bool enabled);
diff --git a/radio/1.6/vts/functional/radio_indication.cpp b/radio/1.6/vts/functional/radio_indication.cpp
index 857ea3c..57ee873 100644
--- a/radio/1.6/vts/functional/radio_indication.cpp
+++ b/radio/1.6/vts/functional/radio_indication.cpp
@@ -19,6 +19,11 @@
 RadioIndication_v1_6::RadioIndication_v1_6(RadioHidlTest_v1_6& parent) : parent_v1_6(parent) {}
 
 /* 1.6 Apis */
+Return<void> RadioIndication_v1_6::dataCallListChanged_1_6(
+        RadioIndicationType /*type*/,
+        const hidl_vec<android::hardware::radio::V1_6::SetupDataCallResult>& /*dcList*/) {
+    return Void();
+}
 
 /* 1.5 Apis */
 Return<void> RadioIndication_v1_6::uiccApplicationsEnablementChanged(RadioIndicationType /*type*/,
diff --git a/radio/1.6/vts/functional/radio_response.cpp b/radio/1.6/vts/functional/radio_response.cpp
index 44e61b9..f53e199 100644
--- a/radio/1.6/vts/functional/radio_response.cpp
+++ b/radio/1.6/vts/functional/radio_response.cpp
@@ -1041,4 +1041,18 @@
 }
 
 /* 1.6 Apis */
+Return<void> RadioResponse_v1_6::setupDataCallResponse_1_6(
+        const RadioResponseInfo& info,
+        const android::hardware::radio::V1_6::SetupDataCallResult& /* dcResponse */) {
+    rspInfo = info;
+    parent_v1_6.notify(info.serial);
+    return Void();
+}
 
+Return<void> RadioResponse_v1_6::getDataCallListResponse_1_6(
+        const RadioResponseInfo& info,
+        const hidl_vec<::android::hardware::radio::V1_6::SetupDataCallResult>& /* dcResponse */) {
+    rspInfo = info;
+    parent_v1_6.notify(info.serial);
+    return Void();
+}
diff --git a/sensors/common/default/2.X/multihal/HalProxy.cpp b/sensors/common/default/2.X/multihal/HalProxy.cpp
index fe3fc84..8dda0af 100644
--- a/sensors/common/default/2.X/multihal/HalProxy.cpp
+++ b/sensors/common/default/2.X/multihal/HalProxy.cpp
@@ -341,7 +341,7 @@
         return Void();
     }
 
-    android::base::borrowed_fd writeFd = dup(fd->data[0]);
+    int writeFd = fd->data[0];
 
     std::ostringstream stream;
     stream << "===HalProxy===" << std::endl;
diff --git a/tests/msgq/1.0/default/Android.bp b/tests/msgq/1.0/default/Android.bp
index e6408aa..a5ba23d 100644
--- a/tests/msgq/1.0/default/Android.bp
+++ b/tests/msgq/1.0/default/Android.bp
@@ -19,7 +19,7 @@
     relative_install_path: "hw",
     srcs: [
         "TestMsgQ.cpp",
-        "BenchmarkMsgQ.cpp"
+        "BenchmarkMsgQ.cpp",
     ],
     shared_libs: [
         "libbase",
@@ -34,7 +34,7 @@
     // libs should be used on device.
     static_libs: [
         "android.hardware.tests.msgq@1.0",
-    ]
+    ],
 }
 
 cc_test {
@@ -49,7 +49,7 @@
         "libhidlbase",
         "liblog",
         "libutils",
-        "android.hardware.tests.msgq@1.0"
+        "android.hardware.tests.msgq@1.0",
     ],
     test_suites: ["general-tests"],
 }
@@ -67,14 +67,32 @@
         "libhidlbase",
         "liblog",
         "libutils",
+        "libbinder_ndk",
     ],
 
+    compile_multilib: "both",
+    multilib: {
+        lib32: {
+            suffix: "32",
+        },
+        lib64: {
+            suffix: "64",
+        },
+    },
+    test_suites: ["device-tests"],
+
     // Allow dlsym'ing self for statically linked passthrough implementations
     ldflags: ["-rdynamic"],
 
     // These are static libs only for testing purposes and portability. Shared
     // libs should be used on device.
-    static_libs: ["android.hardware.tests.msgq@1.0"],
-    whole_static_libs: ["android.hardware.tests.msgq@1.0-impl"],
-    test_suites: ["general-tests"],
+    static_libs: [
+        "android.hardware.tests.msgq@1.0",
+        "android.fmq.test-ndk_platform",
+        "android.hardware.common-unstable-ndk_platform",
+    ],
+    whole_static_libs: [
+        "android.hardware.tests.msgq@1.0-impl",
+        "android.fmq.test-impl",
+    ],
 }
diff --git a/tests/msgq/1.0/default/mq_test_service.cpp b/tests/msgq/1.0/default/mq_test_service.cpp
index b921bfd..72ffe41 100644
--- a/tests/msgq/1.0/default/mq_test_service.cpp
+++ b/tests/msgq/1.0/default/mq_test_service.cpp
@@ -16,8 +16,14 @@
 
 #define LOG_TAG "FMQ_UnitTests"
 
+#include <TestAidlMsgQ.h>
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
 #include <android/hardware/tests/msgq/1.0/ITestMsgQ.h>
 
+using aidl::android::fmq::test::TestAidlMsgQ;
+
 #include <hidl/LegacySupport.h>
 
 using android::hardware::tests::msgq::V1_0::ITestMsgQ;
@@ -25,5 +31,17 @@
 
 int main() {
     android::hardware::details::setTrebleTestingOverride(true);
-    return defaultPassthroughServiceImplementation<ITestMsgQ>();
+    // Register AIDL service
+    ABinderProcess_startThreadPool();
+    std::shared_ptr<TestAidlMsgQ> store = ndk::SharedRefBase::make<TestAidlMsgQ>();
+
+    const std::string instance = std::string() + TestAidlMsgQ::descriptor + "/default";
+    LOG(INFO) << "instance: " << instance;
+    CHECK(AServiceManager_addService(store->asBinder().get(), instance.c_str()) == STATUS_OK);
+
+    // Register HIDL service
+    CHECK(defaultPassthroughServiceImplementation<ITestMsgQ>() == android::OK);
+    ABinderProcess_joinThreadPool();
+
+    return EXIT_FAILURE;  // should not reach
 }
diff --git a/tv/tuner/1.1/IFrontend.hal b/tv/tuner/1.1/IFrontend.hal
index b570549..0b0ce39 100644
--- a/tv/tuner/1.1/IFrontend.hal
+++ b/tv/tuner/1.1/IFrontend.hal
@@ -67,4 +67,18 @@
      */
     scan_1_1(FrontendSettings settings, FrontendScanType type, FrontendSettingsExt settingsExt)
             generates (Result result);
+
+    /**
+     * Link Conditional Access Modules (CAM) to Frontend support Common Interface (CI) bypass mode.
+     *
+     * The client may use this to link CI-CAM to a frontend. CI bypass mode requires that the
+     * CICAM also receives the TS concurrently from the frontend when the Demux is receiving the TS
+     * directly from the frontend.
+     *
+     * @param ciCamId specify CI-CAM Id to link.
+     * @return result Result status of the operation.
+     *         SUCCESS if successful,
+     *         UNKNOWN_ERROR if failed for other reasons.
+     */
+    linkCiCam(uint32_t ciCamId) generates (Result result);
 };
diff --git a/tv/tuner/1.1/default/Frontend.cpp b/tv/tuner/1.1/default/Frontend.cpp
index 1e9435b..467d547 100644
--- a/tv/tuner/1.1/default/Frontend.cpp
+++ b/tv/tuner/1.1/default/Frontend.cpp
@@ -273,6 +273,14 @@
     return Result::SUCCESS;
 }
 
+Return<Result> Frontend::linkCiCam(uint32_t ciCamId) {
+    ALOGV("%s", __FUNCTION__);
+
+    mCiCamId = ciCamId;
+
+    return Result::SUCCESS;
+}
+
 FrontendType Frontend::getFrontendType() {
     return mType;
 }
diff --git a/tv/tuner/1.1/default/Frontend.h b/tv/tuner/1.1/default/Frontend.h
index d44f4ae..6a80232 100644
--- a/tv/tuner/1.1/default/Frontend.h
+++ b/tv/tuner/1.1/default/Frontend.h
@@ -62,6 +62,8 @@
 
     virtual Return<Result> setLnb(uint32_t lnb) override;
 
+    virtual Return<Result> linkCiCam(uint32_t ciCamId) override;
+
     FrontendType getFrontendType();
 
     FrontendId getFrontendId();
@@ -78,6 +80,7 @@
     FrontendType mType = FrontendType::UNDEFINED;
     FrontendId mId = 0;
     bool mIsLocked = false;
+    uint32_t mCiCamId;
 
     std::ifstream mFrontendData;
 };
diff --git a/wifi/1.0/vts/functional/Android.bp b/wifi/1.0/vts/functional/Android.bp
index 14a8509..cad54fe 100644
--- a/wifi/1.0/vts/functional/Android.bp
+++ b/wifi/1.0/vts/functional/Android.bp
@@ -30,6 +30,8 @@
     ],
     static_libs: [
         "android.hardware.wifi@1.0",
+        "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.5",
         "libwifi-system-iface",
     ],
 }
@@ -49,6 +51,8 @@
         "android.hardware.wifi@1.1",
         "android.hardware.wifi@1.2",
         "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
         "libwifi-system-iface",
     ],
     test_suites: [
diff --git a/wifi/1.0/vts/functional/wifi_chip_hidl_test.cpp b/wifi/1.0/vts/functional/wifi_chip_hidl_test.cpp
index b17d2ad..6c8f560 100644
--- a/wifi/1.0/vts/functional/wifi_chip_hidl_test.cpp
+++ b/wifi/1.0/vts/functional/wifi_chip_hidl_test.cpp
@@ -18,7 +18,6 @@
 
 #include <android/hardware/wifi/1.0/IWifi.h>
 #include <android/hardware/wifi/1.0/IWifiChip.h>
-#include <android/hardware/wifi/1.3/IWifiChip.h>
 #include <gtest/gtest.h>
 #include <hidl/GtestPrinter.h>
 #include <hidl/ServiceManagement.h>
@@ -94,23 +93,7 @@
     uint32_t configureChipForStaIfaceAndGetCapabilities() {
         configureChipForIfaceType(IfaceType::STA, true);
 
-        sp<::android::hardware::wifi::V1_3::IWifiChip> chip_converted =
-            ::android::hardware::wifi::V1_3::IWifiChip::castFrom(wifi_chip_);
-
-        std::pair<WifiStatus, uint32_t> status_and_caps;
-
-        if (chip_converted != nullptr) {
-            // Call the newer HAL version
-            status_and_caps = HIDL_INVOKE(chip_converted, getCapabilities_1_3);
-        } else {
-            status_and_caps = HIDL_INVOKE(wifi_chip_, getCapabilities);
-        }
-
-        if (status_and_caps.first.code != WifiStatusCode::SUCCESS) {
-            EXPECT_EQ(WifiStatusCode::ERROR_NOT_SUPPORTED, status_and_caps.first.code);
-            return 0;
-        }
-        return status_and_caps.second;
+        return getChipCapabilitiesLatest(wifi_chip_);
     }
 
     std::string getIfaceName(const sp<IWifiIface>& iface) {
diff --git a/wifi/1.0/vts/functional/wifi_hidl_test_utils.cpp b/wifi/1.0/vts/functional/wifi_hidl_test_utils.cpp
index 092822f..e6e61cf 100644
--- a/wifi/1.0/vts/functional/wifi_hidl_test_utils.cpp
+++ b/wifi/1.0/vts/functional/wifi_hidl_test_utils.cpp
@@ -16,6 +16,8 @@
 
 #include <android/log.h>
 
+#include <android/hardware/wifi/1.3/IWifiChip.h>
+#include <android/hardware/wifi/1.5/IWifiChip.h>
 #include <wifi_system/interface_tool.h>
 
 #include "wifi_hidl_call_util.h"
@@ -208,3 +210,24 @@
     ASSERT_NE(wifi, nullptr);
     HIDL_INVOKE(wifi, stop);
 }
+
+uint32_t getChipCapabilitiesLatest(const sp<IWifiChip>& wifi_chip) {
+    sp<::android::hardware::wifi::V1_5::IWifiChip> chip_converted15 =
+        ::android::hardware::wifi::V1_5::IWifiChip::castFrom(wifi_chip);
+    sp<::android::hardware::wifi::V1_3::IWifiChip> chip_converted13 =
+        ::android::hardware::wifi::V1_3::IWifiChip::castFrom(wifi_chip);
+    std::pair<WifiStatus, uint32_t> status_and_caps;
+
+    if (chip_converted15 != nullptr) {
+        // Call the newer HAL 1.5 version
+        status_and_caps = HIDL_INVOKE(chip_converted15, getCapabilities_1_5);
+    } else if (chip_converted13 != nullptr) {
+        // Call the newer HAL 1.3 version
+        status_and_caps = HIDL_INVOKE(chip_converted13, getCapabilities_1_3);
+    } else {
+        status_and_caps = HIDL_INVOKE(wifi_chip, getCapabilities);
+    }
+
+    EXPECT_EQ(WifiStatusCode::SUCCESS, status_and_caps.first.code);
+    return status_and_caps.second;
+}
diff --git a/wifi/1.0/vts/functional/wifi_hidl_test_utils.h b/wifi/1.0/vts/functional/wifi_hidl_test_utils.h
index 5c78637..62c015c 100644
--- a/wifi/1.0/vts/functional/wifi_hidl_test_utils.h
+++ b/wifi/1.0/vts/functional/wifi_hidl_test_utils.h
@@ -51,3 +51,5 @@
     android::hardware::wifi::V1_0::ChipModeId* configured_mode_id);
 // Used to trigger IWifi.stop() at the end of every test.
 void stopWifi(const std::string& instance_name);
+uint32_t getChipCapabilitiesLatest(
+    const android::sp<android::hardware::wifi::V1_0::IWifiChip>& wifi_chip);
diff --git a/wifi/1.1/vts/functional/Android.bp b/wifi/1.1/vts/functional/Android.bp
index 7dc78e4..9893137 100644
--- a/wifi/1.1/vts/functional/Android.bp
+++ b/wifi/1.1/vts/functional/Android.bp
@@ -26,6 +26,8 @@
         "android.hardware.wifi@1.1",
         "android.hardware.wifi@1.2",
         "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
         "libwifi-system-iface",
     ],
     test_suites: [
diff --git a/wifi/1.1/vts/functional/wifi_chip_hidl_test.cpp b/wifi/1.1/vts/functional/wifi_chip_hidl_test.cpp
index 68c2965..874aa83 100644
--- a/wifi/1.1/vts/functional/wifi_chip_hidl_test.cpp
+++ b/wifi/1.1/vts/functional/wifi_chip_hidl_test.cpp
@@ -18,7 +18,6 @@
 
 #include <android/hardware/wifi/1.1/IWifi.h>
 #include <android/hardware/wifi/1.1/IWifiChip.h>
-#include <android/hardware/wifi/1.3/IWifiChip.h>
 #include <gtest/gtest.h>
 #include <hidl/GtestPrinter.h>
 #include <hidl/ServiceManagement.h>
@@ -64,20 +63,7 @@
         EXPECT_TRUE(configureChipToSupportIfaceType(
             wifi_chip_, IfaceType::STA, &mode_id));
 
-        sp<::android::hardware::wifi::V1_3::IWifiChip> chip_converted =
-            ::android::hardware::wifi::V1_3::IWifiChip::castFrom(wifi_chip_);
-
-        std::pair<WifiStatus, uint32_t> status_and_caps;
-
-        if (chip_converted != nullptr) {
-            // Call the newer HAL version
-            status_and_caps = HIDL_INVOKE(chip_converted, getCapabilities_1_3);
-        } else {
-            status_and_caps = HIDL_INVOKE(wifi_chip_, getCapabilities);
-        }
-
-        EXPECT_EQ(WifiStatusCode::SUCCESS, status_and_caps.first.code);
-        return status_and_caps.second;
+        return getChipCapabilitiesLatest(wifi_chip_);
     }
 
     sp<IWifiChip> wifi_chip_;
diff --git a/wifi/1.2/vts/functional/Android.bp b/wifi/1.2/vts/functional/Android.bp
index 159ba94..21d8388 100644
--- a/wifi/1.2/vts/functional/Android.bp
+++ b/wifi/1.2/vts/functional/Android.bp
@@ -27,6 +27,8 @@
         "android.hardware.wifi@1.1",
         "android.hardware.wifi@1.2",
         "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
         "libwifi-system-iface",
     ],
     disable_framework: true,
@@ -47,6 +49,9 @@
         "android.hardware.wifi@1.0",
         "android.hardware.wifi@1.1",
         "android.hardware.wifi@1.2",
+        "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
         "libwifi-system-iface",
     ],
     test_suites: [
diff --git a/wifi/1.2/vts/functional/wifi_chip_hidl_test.cpp b/wifi/1.2/vts/functional/wifi_chip_hidl_test.cpp
index 8d91a23..6113fbf 100644
--- a/wifi/1.2/vts/functional/wifi_chip_hidl_test.cpp
+++ b/wifi/1.2/vts/functional/wifi_chip_hidl_test.cpp
@@ -111,20 +111,7 @@
     EXPECT_TRUE(
         configureChipToSupportIfaceType(wifi_chip_, IfaceType::STA, &mode_id));
 
-    sp<::android::hardware::wifi::V1_3::IWifiChip> chip_converted =
-        ::android::hardware::wifi::V1_3::IWifiChip::castFrom(wifi_chip_);
-
-    std::pair<WifiStatus, uint32_t> status_and_caps;
-
-    if (chip_converted != nullptr) {
-        // Call the newer HAL version
-        status_and_caps = HIDL_INVOKE(chip_converted, getCapabilities_1_3);
-    } else {
-        status_and_caps = HIDL_INVOKE(wifi_chip_, getCapabilities);
-    }
-
-    EXPECT_EQ(WifiStatusCode::SUCCESS, status_and_caps.first.code);
-    return status_and_caps.second;
+    return getChipCapabilitiesLatest(wifi_chip_);
   }
 
   sp<IWifiChip> wifi_chip_;
diff --git a/wifi/1.3/vts/functional/Android.bp b/wifi/1.3/vts/functional/Android.bp
index 3568330..7ee69c9 100644
--- a/wifi/1.3/vts/functional/Android.bp
+++ b/wifi/1.3/vts/functional/Android.bp
@@ -27,8 +27,13 @@
         "android.hardware.wifi@1.1",
         "android.hardware.wifi@1.2",
         "android.hardware.wifi@1.3",
-        "libwifi-system-iface"
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
+        "libwifi-system-iface",
     ],
     disable_framework: true,
-    test_suites: ["general-tests", "vts"],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
 }
diff --git a/wifi/1.3/vts/functional/wifi_chip_hidl_test.cpp b/wifi/1.3/vts/functional/wifi_chip_hidl_test.cpp
index 361a870..f2c2bea 100644
--- a/wifi/1.3/vts/functional/wifi_chip_hidl_test.cpp
+++ b/wifi/1.3/vts/functional/wifi_chip_hidl_test.cpp
@@ -68,10 +68,7 @@
         ChipModeId mode_id;
         EXPECT_TRUE(configureChipToSupportIfaceType(wifi_chip_, IfaceType::STA,
                                                     &mode_id));
-        const auto& status_and_caps =
-            HIDL_INVOKE(wifi_chip_, getCapabilities_1_3);
-        EXPECT_EQ(WifiStatusCode::SUCCESS, status_and_caps.first.code);
-        return status_and_caps.second;
+        return getChipCapabilitiesLatest(wifi_chip_);
     }
 
     sp<IWifiChip> wifi_chip_;
diff --git a/wifi/1.4/vts/functional/wifi_rtt_controller_hidl_test.cpp b/wifi/1.4/vts/functional/wifi_rtt_controller_hidl_test.cpp
index 902b2f0..3977cdd 100644
--- a/wifi/1.4/vts/functional/wifi_rtt_controller_hidl_test.cpp
+++ b/wifi/1.4/vts/functional/wifi_rtt_controller_hidl_test.cpp
@@ -148,6 +148,51 @@
 }
 
 /*
+ * Request2SidedRangeMeasurement
+ * This test case tests the two sided ranging - 802.11mc FTM protocol.
+ */
+TEST_P(WifiRttControllerHidlTest, Request2SidedRangeMeasurement) {
+    std::pair<WifiStatus, RttCapabilities> status_and_caps;
+
+    // Get the Capabilities
+    status_and_caps = HIDL_INVOKE(wifi_rtt_controller_, getCapabilities_1_4);
+    EXPECT_EQ(WifiStatusCode::SUCCESS, status_and_caps.first.code);
+    if (!status_and_caps.second.rttFtmSupported) {
+        GTEST_SKIP()
+            << "Skipping two sided RTT since driver/fw doesn't support";
+    }
+    std::vector<RttConfig> configs;
+    RttConfig config;
+    int cmdId = 55;
+    // Set the config with test data
+    for (int i = 0; i < 6; i++) {
+        config.addr[i] = i;
+    }
+    config.type = RttType::TWO_SIDED;
+    config.peer = RttPeerType::AP;
+    config.channel.width = WifiChannelWidthInMhz::WIDTH_80;
+    config.channel.centerFreq = 5180;
+    config.channel.centerFreq0 = 5210;
+    config.channel.centerFreq1 = 0;
+    config.bw = RttBw::BW_20MHZ;
+    config.preamble = RttPreamble::HT;
+    config.mustRequestLci = false;
+    config.mustRequestLcr = false;
+    config.burstPeriod = 0;
+    config.numBurst = 0;
+    config.numFramesPerBurst = 8;
+    config.numRetriesPerRttFrame = 0;
+    config.numRetriesPerFtmr = 0;
+    config.burstDuration = 9;
+    // Insert config in the vector
+    configs.push_back(config);
+
+    // Invoke the call
+    const auto& status =
+        HIDL_INVOKE(wifi_rtt_controller_, rangeRequest_1_4, cmdId, configs);
+    EXPECT_EQ(WifiStatusCode::SUCCESS, status.code);
+}
+/*
  * rangeRequest_1_4
  */
 TEST_P(WifiRttControllerHidlTest, RangeRequest_1_4) {
@@ -156,6 +201,10 @@
     // Get the Capabilities
     status_and_caps = HIDL_INVOKE(wifi_rtt_controller_, getCapabilities_1_4);
     EXPECT_EQ(WifiStatusCode::SUCCESS, status_and_caps.first.code);
+    if (!status_and_caps.second.rttOneSidedSupported) {
+        GTEST_SKIP()
+            << "Skipping one sided RTT since driver/fw doesn't support";
+    }
     // Get the highest support preamble
     int preamble = 1;
     status_and_caps.second.preambleSupport >>= 1;
diff --git a/wifi/1.5/Android.bp b/wifi/1.5/Android.bp
index 37a1cf3..5304760 100644
--- a/wifi/1.5/Android.bp
+++ b/wifi/1.5/Android.bp
@@ -4,7 +4,9 @@
     name: "android.hardware.wifi@1.5",
     root: "android.hardware",
     srcs: [
+        "types.hal",
         "IWifi.hal",
+        "IWifiChip.hal",
     ],
     interfaces: [
         "android.hardware.wifi@1.0",
@@ -16,6 +18,7 @@
     ],
     gen_java: true,
     apex_available: [
+        "//apex_available:platform",
         "com.android.wifi",
     ],
 }
diff --git a/wifi/1.5/IWifiChip.hal b/wifi/1.5/IWifiChip.hal
new file mode 100644
index 0000000..5243baf
--- /dev/null
+++ b/wifi/1.5/IWifiChip.hal
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi@1.5;
+
+import @1.0::WifiStatus;
+import @1.0::IWifiIface;
+import @1.3::IWifiChip;
+import @1.4::IWifiChip;
+
+/**
+ * Interface that represents a chip that must be configured as a single unit.
+ */
+interface IWifiChip extends @1.4::IWifiChip {
+    /**
+     * Capabilities exposed by this chip.
+     */
+    enum ChipCapabilityMask : @1.3::IWifiChip.ChipCapabilityMask {
+        /**
+         * chip can operate in the 60GHz band(WiGig chip)
+         */
+        WIGIG = 1 << 14,
+    };
+
+    /**
+     * Get the capabilities supported by this chip.
+     *
+     * @return status WifiStatus of the operation.
+     *         Possible status codes:
+     *         |WifiStatusCode.SUCCESS|,
+     *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+     *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+     *         |WifiStatusCode.ERROR_UNKNOWN|
+     * @return capabilities Bitset of |ChipCapabilityMask| values.
+     */
+    getCapabilities_1_5()
+        generates (WifiStatus status, bitfield<ChipCapabilityMask> capabilities);
+};
diff --git a/wifi/1.5/default/hidl_struct_util.cpp b/wifi/1.5/default/hidl_struct_util.cpp
index a155ff8..91a82a7 100644
--- a/wifi/1.5/default/hidl_struct_util.cpp
+++ b/wifi/1.5/default/hidl_struct_util.cpp
@@ -69,9 +69,9 @@
     return {};
 }
 
-V1_3::IWifiChip::ChipCapabilityMask convertLegacyFeatureToHidlChipCapability(
-    uint32_t feature) {
-    using HidlChipCaps = V1_3::IWifiChip::ChipCapabilityMask;
+V1_5::IWifiChip::ChipCapabilityMask convertLegacyFeatureToHidlChipCapability(
+    uint64_t feature) {
+    using HidlChipCaps = V1_5::IWifiChip::ChipCapabilityMask;
     switch (feature) {
         case WIFI_FEATURE_SET_TX_POWER_LIMIT:
             return HidlChipCaps::SET_TX_POWER_LIMIT;
@@ -81,6 +81,8 @@
             return HidlChipCaps::D2D_RTT;
         case WIFI_FEATURE_D2AP_RTT:
             return HidlChipCaps::D2AP_RTT;
+        case WIFI_FEATURE_INFRA_60G:
+            return HidlChipCaps::WIGIG;
         case WIFI_FEATURE_SET_LATENCY_MODE:
             return HidlChipCaps::SET_LATENCY_MODE;
         case WIFI_FEATURE_P2P_RAND_MAC:
@@ -126,7 +128,7 @@
 }
 
 bool convertLegacyFeaturesToHidlChipCapabilities(
-    uint32_t legacy_feature_set, uint32_t legacy_logger_feature_set,
+    uint64_t legacy_feature_set, uint32_t legacy_logger_feature_set,
     uint32_t* hidl_caps) {
     if (!hidl_caps) {
         return false;
@@ -143,10 +145,11 @@
                 convertLegacyLoggerFeatureToHidlChipCapability(feature);
         }
     }
-    std::vector<uint32_t> features = {WIFI_FEATURE_SET_TX_POWER_LIMIT,
+    std::vector<uint64_t> features = {WIFI_FEATURE_SET_TX_POWER_LIMIT,
                                       WIFI_FEATURE_USE_BODY_HEAD_SAR,
                                       WIFI_FEATURE_D2D_RTT,
                                       WIFI_FEATURE_D2AP_RTT,
+                                      WIFI_FEATURE_INFRA_60G,
                                       WIFI_FEATURE_SET_LATENCY_MODE,
                                       WIFI_FEATURE_P2P_RAND_MAC};
     for (const auto feature : features) {
diff --git a/wifi/1.5/default/hidl_struct_util.h b/wifi/1.5/default/hidl_struct_util.h
index b6567ff..c6dc692 100644
--- a/wifi/1.5/default/hidl_struct_util.h
+++ b/wifi/1.5/default/hidl_struct_util.h
@@ -22,10 +22,10 @@
 #include <android/hardware/wifi/1.0/IWifiChip.h>
 #include <android/hardware/wifi/1.0/types.h>
 #include <android/hardware/wifi/1.2/types.h>
-#include <android/hardware/wifi/1.3/IWifiChip.h>
 #include <android/hardware/wifi/1.3/types.h>
 #include <android/hardware/wifi/1.4/IWifiChipEventCallback.h>
 #include <android/hardware/wifi/1.4/types.h>
+#include <android/hardware/wifi/1.5/IWifiChip.h>
 
 #include "wifi_legacy_hal.h"
 
@@ -45,7 +45,7 @@
 
 // Chip conversion methods.
 bool convertLegacyFeaturesToHidlChipCapabilities(
-    uint32_t legacy_feature_set, uint32_t legacy_logger_feature_set,
+    uint64_t legacy_feature_set, uint32_t legacy_logger_feature_set,
     uint32_t* hidl_caps);
 bool convertLegacyDebugRingBufferStatusToHidl(
     const legacy_hal::wifi_ring_buffer_status& legacy_status,
diff --git a/wifi/1.5/default/wifi_chip.cpp b/wifi/1.5/default/wifi_chip.cpp
index 9c352bc..ebff722 100644
--- a/wifi/1.5/default/wifi_chip.cpp
+++ b/wifi/1.5/default/wifi_chip.cpp
@@ -281,9 +281,6 @@
             continue;
         }
         std::string cur_file_name(dp->d_name);
-        // string.size() does not include the null terminator. The cpio FreeBSD
-        // file header expects the null character to be included in the length.
-        const size_t file_name_len = cur_file_name.size() + 1;
         struct stat st;
         const std::string cur_file_path = kTombstoneFolderPath + cur_file_name;
         if (stat(cur_file_path.c_str(), &st) == -1) {
@@ -297,8 +294,15 @@
             n_error++;
             continue;
         }
+        std::string file_name_with_last_modified_time =
+            cur_file_name + "-" + std::to_string(st.st_mtime);
+        // string.size() does not include the null terminator. The cpio FreeBSD
+        // file header expects the null character to be included in the length.
+        const size_t file_name_len =
+            file_name_with_last_modified_time.size() + 1;
         unique_fd file_auto_closer(fd_read);
-        if (!cpioWriteHeader(out_fd, st, cur_file_name.c_str(),
+        if (!cpioWriteHeader(out_fd, st,
+                             file_name_with_last_modified_time.c_str(),
                              file_name_len)) {
             return ++n_error;
         }
@@ -624,6 +628,13 @@
                            hidl_status_cb);
 }
 
+Return<void> WifiChip::getCapabilities_1_5(
+    getCapabilities_1_5_cb hidl_status_cb) {
+    return validateAndCall(this, WifiStatusCode::ERROR_WIFI_CHIP_INVALID,
+                           &WifiChip::getCapabilitiesInternal_1_5,
+                           hidl_status_cb);
+}
+
 Return<void> WifiChip::debug(const hidl_handle& handle,
                              const hidl_vec<hidl_string>&) {
     if (handle != nullptr && handle->numFds >= 1) {
@@ -1233,8 +1244,13 @@
 }
 
 std::pair<WifiStatus, uint32_t> WifiChip::getCapabilitiesInternal_1_3() {
+    // Deprecated support for this callback.
+    return {createWifiStatus(WifiStatusCode::ERROR_NOT_SUPPORTED), 0};
+}
+
+std::pair<WifiStatus, uint32_t> WifiChip::getCapabilitiesInternal_1_5() {
     legacy_hal::wifi_error legacy_status;
-    uint32_t legacy_feature_set;
+    uint64_t legacy_feature_set;
     uint32_t legacy_logger_feature_set;
     const auto ifname = getFirstActiveWlanIfaceName();
     std::tie(legacy_status, legacy_feature_set) =
diff --git a/wifi/1.5/default/wifi_chip.h b/wifi/1.5/default/wifi_chip.h
index 5f1d9e8..8cc0452 100644
--- a/wifi/1.5/default/wifi_chip.h
+++ b/wifi/1.5/default/wifi_chip.h
@@ -22,8 +22,8 @@
 #include <mutex>
 
 #include <android-base/macros.h>
-#include <android/hardware/wifi/1.4/IWifiChip.h>
 #include <android/hardware/wifi/1.4/IWifiRttController.h>
+#include <android/hardware/wifi/1.5/IWifiChip.h>
 
 #include "hidl_callback_util.h"
 #include "ringbuffer.h"
@@ -48,7 +48,7 @@
  * Since there is only a single chip instance used today, there is no
  * identifying handle information stored here.
  */
-class WifiChip : public V1_4::IWifiChip {
+class WifiChip : public V1_5::IWifiChip {
    public:
     WifiChip(ChipId chip_id, bool is_primary,
              const std::weak_ptr<legacy_hal::WifiLegacyHal> legacy_hal,
@@ -153,6 +153,8 @@
         selectTxPowerScenario_cb hidl_status_cb) override;
     Return<void> getCapabilities_1_3(
         getCapabilities_cb hidl_status_cb) override;
+    Return<void> getCapabilities_1_5(
+        getCapabilities_1_5_cb hidl_status_cb) override;
     Return<void> debug(const hidl_handle& handle,
                        const hidl_vec<hidl_string>& options) override;
     Return<void> createRttController_1_4(
@@ -226,6 +228,7 @@
         const sp<V1_2::IWifiChipEventCallback>& event_callback);
     WifiStatus selectTxPowerScenarioInternal_1_2(TxPowerScenario scenario);
     std::pair<WifiStatus, uint32_t> getCapabilitiesInternal_1_3();
+    std::pair<WifiStatus, uint32_t> getCapabilitiesInternal_1_5();
     std::pair<WifiStatus, sp<V1_4::IWifiRttController>>
     createRttControllerInternal_1_4(const sp<IWifiIface>& bound_iface);
     WifiStatus registerEventCallbackInternal_1_4(
diff --git a/wifi/1.5/default/wifi_legacy_hal.cpp b/wifi/1.5/default/wifi_legacy_hal.cpp
index 7d14e9d..398bfac 100644
--- a/wifi/1.5/default/wifi_legacy_hal.cpp
+++ b/wifi/1.5/default/wifi_legacy_hal.cpp
@@ -486,7 +486,7 @@
     return {status, std::move(firmware_dump)};
 }
 
-std::pair<wifi_error, uint32_t> WifiLegacyHal::getSupportedFeatureSet(
+std::pair<wifi_error, uint64_t> WifiLegacyHal::getSupportedFeatureSet(
     const std::string& iface_name) {
     feature_set set = 0, chip_set = 0;
     wifi_error status = WIFI_SUCCESS;
@@ -502,7 +502,7 @@
         status = global_func_table_.wifi_get_supported_feature_set(iface_handle,
                                                                    &set);
     }
-    return {status, static_cast<uint32_t>(set | chip_set)};
+    return {status, static_cast<uint64_t>(set | chip_set)};
 }
 
 std::pair<wifi_error, PacketFilterCapabilities>
diff --git a/wifi/1.5/default/wifi_legacy_hal.h b/wifi/1.5/default/wifi_legacy_hal.h
index 2984a00..9a06efd 100644
--- a/wifi/1.5/default/wifi_legacy_hal.h
+++ b/wifi/1.5/default/wifi_legacy_hal.h
@@ -196,7 +196,7 @@
         const std::string& iface_name);
     std::pair<wifi_error, std::vector<uint8_t>> requestFirmwareMemoryDump(
         const std::string& iface_name);
-    std::pair<wifi_error, uint32_t> getSupportedFeatureSet(
+    std::pair<wifi_error, uint64_t> getSupportedFeatureSet(
         const std::string& iface_name);
     // APF functions.
     std::pair<wifi_error, PacketFilterCapabilities> getPacketFilterCapabilities(
diff --git a/wifi/1.5/default/wifi_nan_iface.cpp b/wifi/1.5/default/wifi_nan_iface.cpp
index 84fb558..e2b0332 100644
--- a/wifi/1.5/default/wifi_nan_iface.cpp
+++ b/wifi/1.5/default/wifi_nan_iface.cpp
@@ -534,6 +534,9 @@
 }
 
 void WifiNanIface::invalidate() {
+    if (!isValid()) {
+        return;
+    }
     // send commands to HAL to actually disable and destroy interfaces
     legacy_hal_.lock()->nanDisableRequest(ifname_, 0xFFFF);
     legacy_hal_.lock()->nanDataInterfaceDelete(ifname_, 0xFFFE, "aware_data0");
diff --git a/wifi/1.5/types.hal b/wifi/1.5/types.hal
new file mode 100644
index 0000000..71f0679
--- /dev/null
+++ b/wifi/1.5/types.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi@1.5;
+
+import @1.0::WifiBand;
+
+/**
+ * Wifi bands defined in 80211 spec.
+ */
+enum WifiBand : @1.0::WifiBand {
+    /**
+     * 60 GHz.
+     */
+    BAND_60GHZ = 16,
+    /**
+     * 2.4 GHz + 5 GHz no DFS + 6 GHz + 60 GHz.
+     */
+    BAND_24GHZ_5GHZ_6GHZ_60GHZ = 27,
+    /**
+     * 2.4 GHz + 5 GHz with DFS + 6 GHz + 60 GHz.
+     */
+    BAND_24GHZ_5GHZ_WITH_DFS_6GHZ_60GHZ = 31,
+};
diff --git a/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp b/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp
index 2715891..a39f064 100644
--- a/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp
+++ b/wifi/hostapd/1.2/vts/functional/hostapd_hidl_test.cpp
@@ -72,7 +72,7 @@
             "wifi_softap_wpa3_sae_supported");
     }
 
-    virtual void TearDown() override { stopHostapd(hostapd_instance_name_); }
+    virtual void TearDown() override { stopHostapd(wifi_instance_name_); }
 
    protected:
     bool isWpa3SaeSupport_ = false;
diff --git a/wifi/hostapd/1.3/Android.bp b/wifi/hostapd/1.3/Android.bp
index aef3267..31faa6a 100644
--- a/wifi/hostapd/1.3/Android.bp
+++ b/wifi/hostapd/1.3/Android.bp
@@ -17,6 +17,7 @@
     ],
     gen_java: true,
     apex_available: [
+        "//apex_available:platform",
         "com.android.wifi",
     ],
 }
diff --git a/wifi/hostapd/1.3/IHostapd.hal b/wifi/hostapd/1.3/IHostapd.hal
index 7ac20e4..d16448d 100644
--- a/wifi/hostapd/1.3/IHostapd.hal
+++ b/wifi/hostapd/1.3/IHostapd.hal
@@ -18,8 +18,8 @@
 
 import @1.2::IHostapd;
 import @1.2::HostapdStatus;
-
 import IHostapdCallback;
+
 /**
  * Top-level object for managing SoftAPs.
  */
@@ -39,6 +39,5 @@
      *     |HostapdStatusCode.SUCCESS|,
      *     |HostapdStatusCode.FAILURE_UNKNOWN|
      */
-    registerCallback_1_3(IHostapdCallback callback)
-        generates (HostapdStatus status);
+    registerCallback_1_3(IHostapdCallback callback) generates (HostapdStatus status);
 };
diff --git a/wifi/hostapd/1.3/IHostapdCallback.hal b/wifi/hostapd/1.3/IHostapdCallback.hal
index 5202178..4db470d 100644
--- a/wifi/hostapd/1.3/IHostapdCallback.hal
+++ b/wifi/hostapd/1.3/IHostapdCallback.hal
@@ -17,6 +17,7 @@
 package android.hardware.wifi.hostapd@1.3;
 
 import @1.1::IHostapdCallback;
+import @1.2::MacAddress;
 import Generation;
 
 /**
@@ -24,4 +25,20 @@
  */
 interface IHostapdCallback extends @1.1::IHostapdCallback {
     oneway onInterfaceInfoChanged(string ifaceName, Generation generation);
+
+    /**
+     * Invoked when a client connects/disconnects from the hotspot.
+     *
+     * @param ifaceName Name of the interface which is added via
+     * |IHostapd.addAccessPoint|.
+     * @param apIfaceInstance The identity of the AP instance. The interface
+     * will have two instances in dual AP mode. The apIfaceInstance can be used
+     * to identify which instance the callback is from.
+     * Note: The apIfaceInstance must be same as ifaceName in single AP mode.
+     * @param clientAddress Mac Address of hotspot client.
+     * @param isConnected true when client connected, false when client
+     * disconnected.
+     */
+    oneway onConnectedClientsChanged(string ifaceName, string apIfaceInstance,
+        MacAddress clientAddress, bool isConnected);
 };
diff --git a/wifi/hostapd/1.3/types.hal b/wifi/hostapd/1.3/types.hal
index ce092c0..887ea0f 100644
--- a/wifi/hostapd/1.3/types.hal
+++ b/wifi/hostapd/1.3/types.hal
@@ -34,4 +34,3 @@
     WIFI_STANDARD_11AC = 2,
     WIFI_STANDARD_11AX = 3,
 };
-
diff --git a/wifi/supplicant/1.3/vts/functional/supplicant_sta_iface_hidl_test.cpp b/wifi/supplicant/1.3/vts/functional/supplicant_sta_iface_hidl_test.cpp
index 011a955..9b7b45d 100644
--- a/wifi/supplicant/1.3/vts/functional/supplicant_sta_iface_hidl_test.cpp
+++ b/wifi/supplicant/1.3/vts/functional/supplicant_sta_iface_hidl_test.cpp
@@ -353,7 +353,11 @@
     sta_iface_->getConnectionCapabilities(
         [&](const SupplicantStatus& status,
             ConnectionCapabilities /* capabilities */) {
-            EXPECT_EQ(SupplicantStatusCode::SUCCESS, status.code);
+            // Since getConnectionCapabilities() is overridden by an
+            // upgraded API in newer HAL versions, allow for FAILURE_UNKNOWN
+            if (status.code != SupplicantStatusCode::FAILURE_UNKNOWN) {
+                EXPECT_EQ(SupplicantStatusCode::SUCCESS, status.code);
+            }
         });
 }
 
diff --git a/wifi/supplicant/1.4/Android.bp b/wifi/supplicant/1.4/Android.bp
index ff2a8bc..f3a7cf8 100644
--- a/wifi/supplicant/1.4/Android.bp
+++ b/wifi/supplicant/1.4/Android.bp
@@ -4,7 +4,9 @@
     name: "android.hardware.wifi.supplicant@1.4",
     root: "android.hardware",
     srcs: [
+        "types.hal",
         "ISupplicant.hal",
+        "ISupplicantStaIface.hal",
     ],
     interfaces: [
         "android.hardware.wifi.supplicant@1.0",
@@ -16,6 +18,7 @@
     ],
     gen_java: true,
     apex_available: [
+        "//apex_available:platform",
         "com.android.wifi",
     ],
 }
diff --git a/wifi/supplicant/1.4/ISupplicantStaIface.hal b/wifi/supplicant/1.4/ISupplicantStaIface.hal
new file mode 100644
index 0000000..28ef912
--- /dev/null
+++ b/wifi/supplicant/1.4/ISupplicantStaIface.hal
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi.supplicant@1.4;
+
+import @1.0::SupplicantStatus;
+import @1.3::ISupplicantStaIface;
+
+/**
+ * Interface exposed by the supplicant for each station mode network
+ * interface (e.g wlan0) it controls.
+ */
+interface ISupplicantStaIface extends @1.3::ISupplicantStaIface {
+
+    /**
+     * Get Connection capabilities
+     *
+     * @return status Status of the operation, and connection capabilities.
+     *         Possible status codes:
+     *         |SupplicantStatusCode.SUCCESS|,
+     *         |SupplicantStatusCode.FAILURE_UNKNOWN|,
+     */
+    getConnectionCapabilities_1_4()
+        generates (SupplicantStatus status, ConnectionCapabilities capabilities);
+
+};
diff --git a/wifi/supplicant/1.4/types.hal b/wifi/supplicant/1.4/types.hal
new file mode 100644
index 0000000..79e367a
--- /dev/null
+++ b/wifi/supplicant/1.4/types.hal
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi.supplicant@1.4;
+
+import @1.3::ConnectionCapabilities;
+
+/**
+ * Detailed network mode for legacy network
+ */
+enum LegacyMode : uint32_t {
+    UNKNOWN = 0,
+    /**
+     * For 802.11a
+     */
+    A_MODE = 1,
+    /**
+     * For 802.11b
+     */
+    B_MODE = 2,
+    /**
+     * For 802.11g
+     */
+    G_MODE = 3,
+};
+
+/**
+ * Connection Capabilities supported by current network and device
+ */
+struct ConnectionCapabilities {
+    /**
+     * Baseline information as defined in HAL 1.3.
+     */
+    @1.3::ConnectionCapabilities V1_3;
+    /**
+     * detailed network mode for legacy network
+     */
+    LegacyMode legacyMode;
+};
diff --git a/wifi/supplicant/1.4/vts/OWNERS b/wifi/supplicant/1.4/vts/OWNERS
new file mode 100644
index 0000000..8bfb148
--- /dev/null
+++ b/wifi/supplicant/1.4/vts/OWNERS
@@ -0,0 +1,2 @@
+rpius@google.com
+etancohen@google.com
diff --git a/wifi/supplicant/1.4/vts/functional/Android.bp b/wifi/supplicant/1.4/vts/functional/Android.bp
new file mode 100644
index 0000000..7f2ba70
--- /dev/null
+++ b/wifi/supplicant/1.4/vts/functional/Android.bp
@@ -0,0 +1,71 @@
+//
+// Copyright (C) 2020 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_library_static {
+    name: "VtsHalWifiSupplicantV1_4TargetTestUtil",
+    defaults: ["VtsHalTargetTestDefaults"],
+    srcs: ["supplicant_hidl_test_utils_1_4.cpp"],
+    export_include_dirs: [
+        ".",
+    ],
+    static_libs: [
+        "VtsHalWifiV1_0TargetTestUtil",
+        "VtsHalWifiSupplicantV1_0TargetTestUtil",
+        "VtsHalWifiSupplicantV1_1TargetTestUtil",
+        "VtsHalWifiSupplicantV1_2TargetTestUtil",
+        "VtsHalWifiSupplicantV1_3TargetTestUtil",
+        "android.hardware.wifi.supplicant@1.0",
+        "android.hardware.wifi.supplicant@1.1",
+        "android.hardware.wifi.supplicant@1.2",
+        "android.hardware.wifi.supplicant@1.3",
+        "android.hardware.wifi.supplicant@1.4",
+        "android.hardware.wifi@1.0",
+        "libgmock",
+        "libwifi-system",
+        "libwifi-system-iface",
+    ],
+}
+
+cc_test {
+    name: "VtsHalWifiSupplicantV1_4TargetTest",
+    defaults: ["VtsHalTargetTestDefaults"],
+    srcs: [
+        "supplicant_sta_iface_hidl_test.cpp",
+    ],
+    static_libs: [
+        "VtsHalWifiV1_0TargetTestUtil",
+        "VtsHalWifiSupplicantV1_0TargetTestUtil",
+        "VtsHalWifiSupplicantV1_1TargetTestUtil",
+        "VtsHalWifiSupplicantV1_2TargetTestUtil",
+        "VtsHalWifiSupplicantV1_3TargetTestUtil",
+        "VtsHalWifiSupplicantV1_4TargetTestUtil",
+        "android.hardware.wifi.supplicant@1.0",
+        "android.hardware.wifi.supplicant@1.1",
+        "android.hardware.wifi.supplicant@1.2",
+        "android.hardware.wifi.supplicant@1.3",
+        "android.hardware.wifi.supplicant@1.4",
+        "android.hardware.wifi@1.0",
+        "android.hardware.wifi@1.1",
+        "libgmock",
+        "libwifi-system",
+        "libwifi-system-iface",
+    ],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+    disable_framework: true,
+}
diff --git a/wifi/supplicant/1.4/vts/functional/supplicant_hidl_test_utils_1_4.cpp b/wifi/supplicant/1.4/vts/functional/supplicant_hidl_test_utils_1_4.cpp
new file mode 100644
index 0000000..3a59bd6
--- /dev/null
+++ b/wifi/supplicant/1.4/vts/functional/supplicant_hidl_test_utils_1_4.cpp
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <android-base/logging.h>
+
+#include "supplicant_hidl_test_utils.h"
+#include "supplicant_hidl_test_utils_1_4.h"
+
+using ::android::sp;
+using ::android::hardware::wifi::supplicant::V1_4::ISupplicant;
+using ::android::hardware::wifi::supplicant::V1_4::ISupplicantStaIface;
+
+sp<ISupplicantStaIface> getSupplicantStaIface_1_4(
+    const android::sp<android::hardware::wifi::supplicant::V1_4::ISupplicant>&
+        supplicant) {
+    return ISupplicantStaIface::castFrom(getSupplicantStaIface(supplicant));
+}
+
+sp<ISupplicant> getSupplicant_1_4(const std::string& supplicant_instance_name,
+                                  bool isP2pOn) {
+    return ISupplicant::castFrom(
+        getSupplicant(supplicant_instance_name, isP2pOn));
+}
diff --git a/wifi/supplicant/1.4/vts/functional/supplicant_hidl_test_utils_1_4.h b/wifi/supplicant/1.4/vts/functional/supplicant_hidl_test_utils_1_4.h
new file mode 100644
index 0000000..bea4dc1
--- /dev/null
+++ b/wifi/supplicant/1.4/vts/functional/supplicant_hidl_test_utils_1_4.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SUPPLICANT_HIDL_TEST_UTILS_1_4_H
+#define SUPPLICANT_HIDL_TEST_UTILS_1_4_H
+
+#include <android/hardware/wifi/supplicant/1.4/ISupplicant.h>
+#include <android/hardware/wifi/supplicant/1.4/ISupplicantStaIface.h>
+
+android::sp<android::hardware::wifi::supplicant::V1_4::ISupplicantStaIface>
+getSupplicantStaIface_1_4(
+    const android::sp<android::hardware::wifi::supplicant::V1_4::ISupplicant>&
+        supplicant);
+android::sp<android::hardware::wifi::supplicant::V1_4::ISupplicant>
+getSupplicant_1_4(const std::string& supplicant_instance_name, bool isP2pOn);
+
+#endif /* SUPPLICANT_HIDL_TEST_UTILS_1_4_H */
diff --git a/wifi/supplicant/1.4/vts/functional/supplicant_sta_iface_hidl_test.cpp b/wifi/supplicant/1.4/vts/functional/supplicant_sta_iface_hidl_test.cpp
new file mode 100644
index 0000000..2a4f534
--- /dev/null
+++ b/wifi/supplicant/1.4/vts/functional/supplicant_sta_iface_hidl_test.cpp
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <VtsCoreUtil.h>
+#include <android/hardware/wifi/1.1/IWifi.h>
+#include <android/hardware/wifi/supplicant/1.1/ISupplicant.h>
+#include <android/hardware/wifi/supplicant/1.2/types.h>
+#include <android/hardware/wifi/supplicant/1.3/ISupplicant.h>
+#include <android/hardware/wifi/supplicant/1.3/types.h>
+#include <android/hardware/wifi/supplicant/1.4/ISupplicant.h>
+#include <android/hardware/wifi/supplicant/1.4/ISupplicantStaIface.h>
+#include <android/hardware/wifi/supplicant/1.4/types.h>
+#include <gtest/gtest.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/HidlSupport.h>
+#include <hidl/ServiceManagement.h>
+
+#include "supplicant_hidl_test_utils.h"
+#include "supplicant_hidl_test_utils_1_4.h"
+
+using ::android::sp;
+using ::android::hardware::Void;
+using ::android::hardware::wifi::supplicant::V1_0::SupplicantStatus;
+using ::android::hardware::wifi::supplicant::V1_0::SupplicantStatusCode;
+
+using ::android::hardware::wifi::supplicant::V1_4::ConnectionCapabilities;
+using ::android::hardware::wifi::supplicant::V1_4::ISupplicant;
+using ::android::hardware::wifi::supplicant::V1_4::ISupplicantStaIface;
+
+class SupplicantStaIfaceHidlTest
+    : public ::testing::TestWithParam<std::tuple<std::string, std::string>> {
+   public:
+    virtual void SetUp() override {
+        wifi_v1_0_instance_name_ = std::get<0>(GetParam());
+        supplicant_v1_4_instance_name_ = std::get<1>(GetParam());
+        isP2pOn_ =
+            testing::deviceSupportsFeature("android.hardware.wifi.direct");
+
+        stopSupplicant(wifi_v1_0_instance_name_);
+        startSupplicantAndWaitForHidlService(wifi_v1_0_instance_name_,
+                                             supplicant_v1_4_instance_name_);
+        supplicant_ =
+            getSupplicant_1_4(supplicant_v1_4_instance_name_, isP2pOn_);
+        EXPECT_TRUE(turnOnExcessiveLogging(supplicant_));
+        sta_iface_ = getSupplicantStaIface_1_4(supplicant_);
+        ASSERT_NE(sta_iface_.get(), nullptr);
+    }
+
+    virtual void TearDown() override {
+        stopSupplicant(wifi_v1_0_instance_name_);
+    }
+
+   protected:
+    // ISupplicantStaIface object used for all tests in this fixture.
+    sp<ISupplicantStaIface> sta_iface_;
+    sp<ISupplicant> supplicant_;
+    bool isP2pOn_ = false;
+    std::string wifi_v1_0_instance_name_;
+    std::string supplicant_v1_4_instance_name_;
+};
+
+/*
+ * getConnectionCapabilities_1_4
+ */
+TEST_P(SupplicantStaIfaceHidlTest, GetConnectionCapabilities) {
+    sta_iface_->getConnectionCapabilities_1_4(
+        [&](const SupplicantStatus& status,
+            ConnectionCapabilities /* capabilities */) {
+            EXPECT_EQ(SupplicantStatusCode::SUCCESS, status.code);
+        });
+}
+
+INSTANTIATE_TEST_CASE_P(
+    PerInstance, SupplicantStaIfaceHidlTest,
+    testing::Combine(
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(
+            android::hardware::wifi::V1_0::IWifi::descriptor)),
+        testing::ValuesIn(android::hardware::getAllHalInstanceNames(
+            android::hardware::wifi::supplicant::V1_4::ISupplicant::
+                descriptor))),
+    android::hardware::PrintInstanceTupleNameToString<>);