diff --git a/Android.bp b/Android.bp
index 5cb85b4..927e227 100644
--- a/Android.bp
+++ b/Android.bp
@@ -1,6 +1,6 @@
 hidl_package_root {
     name: "android.hardware",
-    path: "hardware/interfaces",
+    use_current: true,
 }
 
 cc_defaults {
@@ -14,11 +14,15 @@
 // VTS tests must link to HAL definition libraries statically.
 cc_defaults {
     name: "VtsHalTargetTestDefaults",
-    defaults: ["hidl_defaults"],
+    defaults: [
+        "vts_target_tests_defaults",
+        "hidl_defaults",
+    ],
 
     // Lists all dependencies that can *not* be expected on the device.
     static_libs: [
         "VtsHalHidlTargetTestBase",
+        "libhidl-gen-utils",
     ],
     group_static_libs: true,
 
diff --git a/atrace/1.0/Android.bp b/atrace/1.0/Android.bp
new file mode 100644
index 0000000..f7c9078
--- /dev/null
+++ b/atrace/1.0/Android.bp
@@ -0,0 +1,22 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.atrace@1.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IAtraceDevice.hal",
+    ],
+    interfaces: [
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "Status",
+        "TracingCategory",
+    ],
+    gen_java: true,
+}
+
diff --git a/atrace/1.0/IAtraceDevice.hal b/atrace/1.0/IAtraceDevice.hal
new file mode 100644
index 0000000..b6e78b4
--- /dev/null
+++ b/atrace/1.0/IAtraceDevice.hal
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.atrace@1.0;
+
+interface IAtraceDevice {
+    /**
+     * Get vendor extended atrace points.
+     *
+     *
+     * @return categories of tracing points the device extended.
+     */
+    listCategories() generates (vec<TracingCategory> categories);
+
+    /**
+     * A hook when atrace set to enable specific categories, so HAL
+     * can enable kernel tracing points and/or notify other things
+     * for userspace tracing turning on.
+     *
+     * @param categories A vector of strings of categories (corresponding to
+     *        TracingCategory.name) atrace needs to be enabled.
+     *
+     * @return status SUCCESS on success,
+     *         ERROR_TRACING_POINT on error with enabling categories,
+     *         ERROR_INVALID_ARGUMENT on invalid argument passed.
+     */
+    enableCategories(vec<string> categories) generates (Status status);
+
+    /**
+     * A hook when atrace set to clean up tracing categories, so HAL
+     * can disable all kernel tracing points and/or notify other things
+     * for userspace tracing turning off.
+     *
+     * @return status SUCCESS on success,
+     *         ERROR_TRACING_POINT on error with disabling categories.
+     */
+    disableAllCategories() generates (Status status);
+};
diff --git a/atrace/1.0/default/Android.bp b/atrace/1.0/default/Android.bp
new file mode 100644
index 0000000..bcaf064
--- /dev/null
+++ b/atrace/1.0/default/Android.bp
@@ -0,0 +1,35 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_binary {
+    name: "android.hardware.atrace@1.0-service",
+    defaults: ["hidl_defaults"],
+    relative_install_path: "hw",
+    vendor: true,
+    init_rc: ["android.hardware.atrace@1.0-service.rc"],
+    vintf_fragments: ["android.hardware.atrace@1.0-service.xml"],
+    srcs: [
+        "AtraceDevice.cpp",
+        "service.cpp",
+    ],
+    shared_libs: [
+        "liblog",
+        "libbase",
+        "libutils",
+        "libhidlbase",
+        "libhidltransport",
+        "android.hardware.atrace@1.0",
+    ],
+}
diff --git a/atrace/1.0/default/AtraceDevice.cpp b/atrace/1.0/default/AtraceDevice.cpp
new file mode 100644
index 0000000..43bcd9a
--- /dev/null
+++ b/atrace/1.0/default/AtraceDevice.cpp
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <android-base/file.h>
+#include <android-base/logging.h>
+
+#include "AtraceDevice.h"
+
+namespace android {
+namespace hardware {
+namespace atrace {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::atrace::V1_0::Status;
+using ::android::hardware::atrace::V1_0::TracingCategory;
+
+struct TracingConfig {
+    std::string description;
+    std::vector<std::pair<std::string, bool>> paths;
+};
+
+// This is a map stores categories and their sysfs paths with required flags
+const std::map<std::string, TracingConfig> kTracingMap = {
+    // gfx
+    {
+        "gfx",
+        {"Graphics",
+         {{"/sys/kernel/debug/tracing/events/mdss/enable", false},
+          {"/sys/kernel/debug/tracing/events/sde/enable", false},
+          {"/sys/kernel/debug/tracing/events/mali_systrace/enable", false}}},
+    },
+    {
+        "ion",
+        {"ION allocation",
+         {{"/sys/kernel/debug/tracing/events/kmem/ion_alloc_buffer_start/enable", true}}},
+    },
+};
+
+// Methods from ::android::hardware::atrace::V1_0::IAtraceDevice follow.
+Return<void> AtraceDevice::listCategories(listCategories_cb _hidl_cb) {
+    hidl_vec<TracingCategory> categories;
+    categories.resize(kTracingMap.size());
+    std::size_t i = 0;
+    for (auto& c : kTracingMap) {
+        categories[i].name = c.first;
+        categories[i].description = c.second.description;
+        i++;
+    }
+    _hidl_cb(categories);
+    return Void();
+}
+
+Return<::android::hardware::atrace::V1_0::Status> AtraceDevice::enableCategories(
+    const hidl_vec<hidl_string>& categories) {
+    if (!categories.size()) {
+        return Status::ERROR_INVALID_ARGUMENT;
+    }
+    for (auto& c : categories) {
+        if (kTracingMap.count(c)) {
+            for (auto& p : kTracingMap.at(c).paths) {
+                if (!android::base::WriteStringToFile("1", p.first)) {
+                    LOG(ERROR) << "Failed to enable tracing on: " << p.first;
+                    if (p.second) {
+                        // disable before return
+                        disableAllCategories();
+                        return Status::ERROR_TRACING_POINT;
+                    }
+                }
+            }
+        } else {
+            return Status::ERROR_INVALID_ARGUMENT;
+        }
+    }
+    return Status::SUCCESS;
+}
+
+Return<::android::hardware::atrace::V1_0::Status> AtraceDevice::disableAllCategories() {
+    auto ret = Status::SUCCESS;
+    for (auto& c : kTracingMap) {
+        for (auto& p : c.second.paths) {
+            if (!android::base::WriteStringToFile("0", p.first)) {
+                LOG(ERROR) << "Failed to enable tracing on: " << p.first;
+                if (p.second) {
+                    ret = Status::ERROR_TRACING_POINT;
+                }
+            }
+        }
+    }
+    return ret;
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace atrace
+}  // namespace hardware
+}  // namespace android
diff --git a/atrace/1.0/default/AtraceDevice.h b/atrace/1.0/default/AtraceDevice.h
new file mode 100644
index 0000000..e700f89
--- /dev/null
+++ b/atrace/1.0/default/AtraceDevice.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_ATRACE_V1_0_ATRACEDEVICE_H
+#define ANDROID_HARDWARE_ATRACE_V1_0_ATRACEDEVICE_H
+
+#include <android/hardware/atrace/1.0/IAtraceDevice.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace atrace {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::sp;
+using ::android::hardware::hidl_array;
+using ::android::hardware::hidl_memory;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+
+struct AtraceDevice : public IAtraceDevice {
+    // Methods from ::android::hardware::atrace::V1_0::IAtraceDevice follow.
+    Return<void> listCategories(listCategories_cb _hidl_cb) override;
+    Return<::android::hardware::atrace::V1_0::Status> enableCategories(
+        const hidl_vec<hidl_string>& categories) override;
+    Return<::android::hardware::atrace::V1_0::Status> disableAllCategories() override;
+
+    // Methods from ::android::hidl::base::V1_0::IBase follow.
+};
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace atrace
+}  // namespace hardware
+}  // namespace android
+
+#endif  // ANDROID_HARDWARE_ATRACE_V1_0_ATRACEDEVICE_H
diff --git a/atrace/1.0/default/android.hardware.atrace@1.0-service.rc b/atrace/1.0/default/android.hardware.atrace@1.0-service.rc
new file mode 100644
index 0000000..eb54c39
--- /dev/null
+++ b/atrace/1.0/default/android.hardware.atrace@1.0-service.rc
@@ -0,0 +1,13 @@
+on late-init
+    # vendor graphics trace points
+    chmod 0666 /sys/kernel/debug/tracing/events/sde/enable
+    chmod 0666 /sys/kernel/debug/tracing/events/mdss/enable
+    chmod 0666 /sys/kernel/debug/tracing/events/mali_systrace/enable
+    # ion allocation trace point
+    chmod 0666 /sys/kernel/debug/tracing/events/kmem/ion_alloc_buffer_start/enable
+
+service vendor.atrace-hal-1-0 /vendor/bin/hw/android.hardware.atrace@1.0-service
+    interface android.hardware.atrace@1.0::IAtraceDevice default
+    class early_hal
+    user system
+    group system
diff --git a/atrace/1.0/default/android.hardware.atrace@1.0-service.xml b/atrace/1.0/default/android.hardware.atrace@1.0-service.xml
new file mode 100644
index 0000000..fd3631c
--- /dev/null
+++ b/atrace/1.0/default/android.hardware.atrace@1.0-service.xml
@@ -0,0 +1,11 @@
+<manifest version="1.0" type="device">
+    <hal format="hidl">
+        <name>android.hardware.atrace</name>
+        <transport>hwbinder</transport>
+        <version>1.0</version>
+        <interface>
+            <name>IAtraceDevice</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+</manifest>
diff --git a/atrace/1.0/default/service.cpp b/atrace/1.0/default/service.cpp
new file mode 100644
index 0000000..662fd73
--- /dev/null
+++ b/atrace/1.0/default/service.cpp
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.atrace@1.0-service"
+
+#include <hidl/HidlSupport.h>
+#include <hidl/HidlTransportSupport.h>
+
+#include "AtraceDevice.h"
+
+using ::android::OK;
+using ::android::sp;
+using ::android::hardware::configureRpcThreadpool;
+using ::android::hardware::joinRpcThreadpool;
+using ::android::hardware::atrace::V1_0::IAtraceDevice;
+using ::android::hardware::atrace::V1_0::Status;
+using ::android::hardware::atrace::V1_0::TracingCategory;
+using ::android::hardware::atrace::V1_0::implementation::AtraceDevice;
+
+int main(int /* argc */, char* /* argv */ []) {
+    sp<IAtraceDevice> atrace = new AtraceDevice;
+    configureRpcThreadpool(1, true /* will join */);
+    if (atrace->registerAsService() != OK) {
+        ALOGE("Could not register service.");
+        return 1;
+    }
+    joinRpcThreadpool();
+
+    ALOGE("Service exited!");
+    return 1;
+}
diff --git a/atrace/1.0/types.hal b/atrace/1.0/types.hal
new file mode 100644
index 0000000..f137ef6
--- /dev/null
+++ b/atrace/1.0/types.hal
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.atrace@1.0;
+
+enum Status : uint32_t {
+    /**
+     * Operation completed without errors.
+     */
+    SUCCESS = 0,
+    /**
+     * Operation failed with errors on enabling tracing point.
+     */
+    ERROR_TRACING_POINT = 1,
+    /**
+     * Operation failed because of invalid argument.
+     */
+    ERROR_INVALID_ARGUMENT = 2
+};
+
+struct TracingCategory {
+    /**
+     * Tracing category name, unique to frameworks's category.
+     */
+    string name;
+    /**
+     * Tracing category description.
+     */
+    string description;
+};
diff --git a/atrace/1.0/vts/functional/Android.bp b/atrace/1.0/vts/functional/Android.bp
new file mode 100644
index 0000000..d3f4276
--- /dev/null
+++ b/atrace/1.0/vts/functional/Android.bp
@@ -0,0 +1,23 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_test {
+    name: "VtsHalAtraceV1_0TargetTest",
+    defaults: ["VtsHalTargetTestDefaults"],
+    srcs: ["VtsHalAtraceV1_0TargetTest.cpp"],
+    static_libs: ["android.hardware.atrace@1.0"],
+    test_suites: ["general-tests"],
+}
diff --git a/atrace/1.0/vts/functional/VtsHalAtraceV1_0TargetTest.cpp b/atrace/1.0/vts/functional/VtsHalAtraceV1_0TargetTest.cpp
new file mode 100644
index 0000000..c62c2f0
--- /dev/null
+++ b/atrace/1.0/vts/functional/VtsHalAtraceV1_0TargetTest.cpp
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <unordered_set>
+
+#include <android/hardware/atrace/1.0/IAtraceDevice.h>
+
+#include <VtsHalHidlTargetTestBase.h>
+#include <VtsHalHidlTargetTestEnvBase.h>
+
+using ::android::sp;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::atrace::V1_0::IAtraceDevice;
+using ::android::hardware::atrace::V1_0::Status;
+
+// Test environment for Boot HIDL HAL.
+class AtraceHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
+   public:
+    // get the test environment singleton
+    static AtraceHidlEnvironment* Instance() {
+        static AtraceHidlEnvironment* instance = new AtraceHidlEnvironment;
+        return instance;
+    }
+
+    virtual void registerTestServices() override { registerTestService<IAtraceDevice>(); }
+
+   private:
+    AtraceHidlEnvironment() {}
+};
+
+/**
+ * There is no expected behaviour that can be tested so these tests check the
+ * HAL doesn't crash with different execution orders.
+ */
+struct AtraceHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+    virtual void SetUp() override {
+        atrace = ::testing::VtsHalHidlTargetTestBase::getService<IAtraceDevice>(
+            AtraceHidlEnvironment::Instance()->getServiceName<IAtraceDevice>());
+        ASSERT_NE(atrace, nullptr);
+    }
+
+    sp<IAtraceDevice> atrace;
+};
+
+hidl_vec<hidl_string> getVendorCategoryName(sp<IAtraceDevice> atrace) {
+    std::unordered_set<std::string> categories_set;
+    Return<void> ret = atrace->listCategories([&](const auto& list) {
+        for (const auto& category : list) {
+            std::string name = category.name;
+            if (categories_set.count(name)) {
+                ADD_FAILURE() << "Duplicate category: " << name;
+            } else {
+                categories_set.emplace(name);
+            }
+        }
+    });
+    if (!ret.isOk()) {
+        ADD_FAILURE();
+    }
+    hidl_vec<hidl_string> categories;
+    categories.resize(categories_set.size());
+    std::size_t i = 0;
+    for (auto& c : categories_set) {
+        categories[i++] = c;
+    }
+    return categories;
+}
+
+/* list categories from vendors. */
+TEST_F(AtraceHidlTest, listCategories) {
+    hidl_vec<hidl_string> vnd_categories = getVendorCategoryName(atrace);
+    EXPECT_NE(0, vnd_categories.size());
+}
+
+/* enable categories. */
+TEST_F(AtraceHidlTest, enableCategories) {
+    hidl_vec<hidl_string> vnd_categories = getVendorCategoryName(atrace);
+    // empty Category with ERROR_INVALID_ARGUMENT
+    hidl_vec<hidl_string> empty_categories;
+    auto ret = atrace->enableCategories(empty_categories);
+    ASSERT_TRUE(ret.isOk());
+    EXPECT_EQ(Status::ERROR_INVALID_ARGUMENT, ret);
+    // non-empty categories SUCCESS
+    ret = atrace->enableCategories(vnd_categories);
+    ASSERT_TRUE(ret.isOk());
+    EXPECT_EQ(Status::SUCCESS, ret);
+}
+
+/* enable categories. */
+TEST_F(AtraceHidlTest, disableAllCategories) {
+    auto ret = atrace->disableAllCategories();
+    ASSERT_TRUE(ret.isOk());
+    EXPECT_EQ(Status::SUCCESS, ret);
+}
+
+int main(int argc, char** argv) {
+    ::testing::AddGlobalTestEnvironment(AtraceHidlEnvironment::Instance());
+    ::testing::InitGoogleTest(&argc, argv);
+    AtraceHidlEnvironment::Instance()->init(&argc, argv);
+    int status = RUN_ALL_TESTS();
+    ALOGI("Test result = %d", status);
+    return status;
+}
diff --git a/audio/4.0/config/Android.bp b/audio/4.0/config/Android.bp
new file mode 100644
index 0000000..6aac899
--- /dev/null
+++ b/audio/4.0/config/Android.bp
@@ -0,0 +1,7 @@
+
+xsd_config {
+    name: "audio_policy_configuration_V4_0",
+    srcs: ["audio_policy_configuration.xsd"],
+    package_name: "audio.policy.configuration.V4_0",
+}
+
diff --git a/audio/4.0/config/api/current.txt b/audio/4.0/config/api/current.txt
new file mode 100644
index 0000000..f0814bf
--- /dev/null
+++ b/audio/4.0/config/api/current.txt
@@ -0,0 +1,401 @@
+package audio.policy.configuration.V4_0 {
+
+  public class AttachedDevices {
+    ctor public AttachedDevices();
+    method public java.util.List<java.lang.String> getItem();
+  }
+
+  public final class AudioDevice extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.AudioDevice valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.AudioDevice[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_AMBIENT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_AUX_DIGITAL;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_BACK_MIC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_A2DP;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_BLE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_BUILTIN_MIC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_BUS;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_FM_TUNER;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_HDMI;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_IP;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_LINE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_LOOPBACK;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_PROXY;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_SPDIF;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_STUB;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_TELEPHONY_RX;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_TV_TUNER;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_USB_ACCESSORY;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_USB_DEVICE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_USB_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_VOICE_CALL;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_IN_WIRED_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_NONE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_AUX_DIGITAL;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_AUX_LINE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_BUS;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_EARPIECE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_ECHO_CANCELLER;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_FM;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_HDMI;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_HDMI_ARC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_HEARING_AID;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_IP;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_LINE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_PROXY;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_SPDIF;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_SPEAKER;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_SPEAKER_SAFE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_STUB;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_TELEPHONY_TX;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_USB_ACCESSORY;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_USB_DEVICE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_USB_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_WIRED_HEADPHONE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioDevice AUDIO_DEVICE_OUT_WIRED_HEADSET;
+  }
+
+  public final class AudioFormat extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.AudioFormat valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.AudioFormat[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADIF;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_ELD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_ERLC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_HE_V1;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_HE_V2;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LTP;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_MAIN;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_SCALABLE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_SSR;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ELD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_ERLC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_HE_V1;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_HE_V2;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_LC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_LD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_LTP;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_MAIN;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_SCALABLE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AAC_SSR;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AC3;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AC4;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_ALAC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AMR_NB;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AMR_WB;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_AMR_WB_PLUS;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_APE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_APTX;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_APTX_HD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_DOLBY_TRUEHD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_DSD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_DTS;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_DTS_HD;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_EVRC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_EVRCB;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_EVRCNW;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_EVRCWB;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_E_AC3;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_FLAC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_HE_AAC_V1;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_HE_AAC_V2;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_IEC61937;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_LDAC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_MP2;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_MP3;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_OPUS;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_PCM_16_BIT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_PCM_24_BIT_PACKED;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_PCM_32_BIT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_PCM_8_24_BIT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_PCM_8_BIT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_PCM_FLOAT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_QCELP;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_SBC;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_VORBIS;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_WMA;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioFormat AUDIO_FORMAT_WMA_PRO;
+  }
+
+  public class AudioPolicyConfiguration {
+    ctor public AudioPolicyConfiguration();
+    method public audio.policy.configuration.V4_0.GlobalConfiguration getGlobalConfiguration();
+    method public java.util.List<audio.policy.configuration.V4_0.Modules> getModules();
+    method public audio.policy.configuration.V4_0.Version getVersion();
+    method public java.util.List<audio.policy.configuration.V4_0.Volumes> getVolumes();
+    method public void setGlobalConfiguration(audio.policy.configuration.V4_0.GlobalConfiguration);
+    method public void setVersion(audio.policy.configuration.V4_0.Version);
+  }
+
+  public final class AudioUsage extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.AudioUsage valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.AudioUsage[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_ALARM;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_ASSISTANCE_SONIFICATION;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_GAME;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_MEDIA;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_NOTIFICATION;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_UNKNOWN;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_VIRTUAL_SOURCE;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V4_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING;
+  }
+
+  public final class DeviceCategory extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.DeviceCategory valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.DeviceCategory[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.DeviceCategory DEVICE_CATEGORY_EARPIECE;
+    enum_constant public static final audio.policy.configuration.V4_0.DeviceCategory DEVICE_CATEGORY_EXT_MEDIA;
+    enum_constant public static final audio.policy.configuration.V4_0.DeviceCategory DEVICE_CATEGORY_HEADSET;
+    enum_constant public static final audio.policy.configuration.V4_0.DeviceCategory DEVICE_CATEGORY_HEARING_AID;
+    enum_constant public static final audio.policy.configuration.V4_0.DeviceCategory DEVICE_CATEGORY_SPEAKER;
+  }
+
+  public class DevicePorts {
+    ctor public DevicePorts();
+    method public java.util.List<audio.policy.configuration.V4_0.DevicePorts.DevicePort> getDevicePort();
+  }
+
+  public static class DevicePorts.DevicePort {
+    ctor public DevicePorts.DevicePort();
+    method public java.lang.String getAddress();
+    method public audio.policy.configuration.V4_0.Gains getGains();
+    method public java.util.List<audio.policy.configuration.V4_0.Profile> getProfile();
+    method public audio.policy.configuration.V4_0.Role getRole();
+    method public java.lang.String getTagName();
+    method public java.lang.String getType();
+    method public boolean get_default();
+    method public void setAddress(java.lang.String);
+    method public void setGains(audio.policy.configuration.V4_0.Gains);
+    method public void setRole(audio.policy.configuration.V4_0.Role);
+    method public void setTagName(java.lang.String);
+    method public void setType(java.lang.String);
+    method public void set_default(boolean);
+  }
+
+  public final class GainMode extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.GainMode valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.GainMode[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.GainMode AUDIO_GAIN_MODE_CHANNELS;
+    enum_constant public static final audio.policy.configuration.V4_0.GainMode AUDIO_GAIN_MODE_JOINT;
+    enum_constant public static final audio.policy.configuration.V4_0.GainMode AUDIO_GAIN_MODE_RAMP;
+  }
+
+  public class Gains {
+    ctor public Gains();
+    method public java.util.List<audio.policy.configuration.V4_0.Gains.Gain> getGain();
+  }
+
+  public static class Gains.Gain {
+    ctor public Gains.Gain();
+    method public java.lang.String getChannel_mask();
+    method public int getDefaultValueMB();
+    method public int getMaxRampMs();
+    method public int getMaxValueMB();
+    method public int getMinRampMs();
+    method public int getMinValueMB();
+    method public audio.policy.configuration.V4_0.GainMode getMode();
+    method public java.lang.String getName();
+    method public int getStepValueMB();
+    method public void setChannel_mask(java.lang.String);
+    method public void setDefaultValueMB(int);
+    method public void setMaxRampMs(int);
+    method public void setMaxValueMB(int);
+    method public void setMinRampMs(int);
+    method public void setMinValueMB(int);
+    method public void setMode(audio.policy.configuration.V4_0.GainMode);
+    method public void setName(java.lang.String);
+    method public void setStepValueMB(int);
+  }
+
+  public class GlobalConfiguration {
+    ctor public GlobalConfiguration();
+    method public boolean getSpeaker_drc_enabled();
+    method public void setSpeaker_drc_enabled(boolean);
+  }
+
+  public final class HalVersion extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.HalVersion valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.HalVersion[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.HalVersion _2_0;
+    enum_constant public static final audio.policy.configuration.V4_0.HalVersion _3_0;
+  }
+
+  public class MixPorts {
+    ctor public MixPorts();
+    method public java.util.List<audio.policy.configuration.V4_0.MixPorts.MixPort> getMixPort();
+  }
+
+  public static class MixPorts.MixPort {
+    ctor public MixPorts.MixPort();
+    method public java.lang.String getFlags();
+    method public audio.policy.configuration.V4_0.Gains getGains();
+    method public long getMaxActiveCount();
+    method public long getMaxOpenCount();
+    method public java.lang.String getName();
+    method public java.util.List<audio.policy.configuration.V4_0.AudioUsage> getPreferredUsage();
+    method public java.util.List<audio.policy.configuration.V4_0.Profile> getProfile();
+    method public audio.policy.configuration.V4_0.Role getRole();
+    method public void setFlags(java.lang.String);
+    method public void setGains(audio.policy.configuration.V4_0.Gains);
+    method public void setMaxActiveCount(long);
+    method public void setMaxOpenCount(long);
+    method public void setName(java.lang.String);
+    method public void setPreferredUsage(java.util.List<audio.policy.configuration.V4_0.AudioUsage>);
+    method public void setRole(audio.policy.configuration.V4_0.Role);
+  }
+
+  public final class MixType extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.MixType valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.MixType[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.MixType mix;
+    enum_constant public static final audio.policy.configuration.V4_0.MixType mux;
+  }
+
+  public class Modules {
+    ctor public Modules();
+    method public java.util.List<audio.policy.configuration.V4_0.Modules.Module> getModule();
+  }
+
+  public static class Modules.Module {
+    ctor public Modules.Module();
+    method public audio.policy.configuration.V4_0.AttachedDevices getAttachedDevices();
+    method public java.lang.String getDefaultOutputDevice();
+    method public audio.policy.configuration.V4_0.DevicePorts getDevicePorts();
+    method public audio.policy.configuration.V4_0.HalVersion getHalVersion();
+    method public audio.policy.configuration.V4_0.MixPorts getMixPorts();
+    method public java.lang.String getName();
+    method public audio.policy.configuration.V4_0.Routes getRoutes();
+    method public void setAttachedDevices(audio.policy.configuration.V4_0.AttachedDevices);
+    method public void setDefaultOutputDevice(java.lang.String);
+    method public void setDevicePorts(audio.policy.configuration.V4_0.DevicePorts);
+    method public void setHalVersion(audio.policy.configuration.V4_0.HalVersion);
+    method public void setMixPorts(audio.policy.configuration.V4_0.MixPorts);
+    method public void setName(java.lang.String);
+    method public void setRoutes(audio.policy.configuration.V4_0.Routes);
+  }
+
+  public class Profile {
+    ctor public Profile();
+    method public java.lang.String getChannelMasks();
+    method public java.lang.String getFormat();
+    method public java.lang.String getName();
+    method public java.lang.String getSamplingRates();
+    method public void setChannelMasks(java.lang.String);
+    method public void setFormat(java.lang.String);
+    method public void setName(java.lang.String);
+    method public void setSamplingRates(java.lang.String);
+  }
+
+  public class Reference {
+    ctor public Reference();
+    method public java.lang.String getName();
+    method public java.util.List<java.lang.String> getPoint();
+    method public void setName(java.lang.String);
+  }
+
+  public final class Role extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.Role valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.Role[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.Role sink;
+    enum_constant public static final audio.policy.configuration.V4_0.Role source;
+  }
+
+  public class Routes {
+    ctor public Routes();
+    method public java.util.List<audio.policy.configuration.V4_0.Routes.Route> getRoute();
+  }
+
+  public static class Routes.Route {
+    ctor public Routes.Route();
+    method public java.lang.String getSink();
+    method public java.lang.String getSources();
+    method public audio.policy.configuration.V4_0.MixType getType();
+    method public void setSink(java.lang.String);
+    method public void setSources(java.lang.String);
+    method public void setType(audio.policy.configuration.V4_0.MixType);
+  }
+
+  public final class Stream extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.Stream valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.Stream[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_ACCESSIBILITY;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_ALARM;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_BLUETOOTH_SCO;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_DTMF;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_ENFORCED_AUDIBLE;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_MUSIC;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_NOTIFICATION;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_PATCH;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_REROUTING;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_RING;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_SYSTEM;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_TTS;
+    enum_constant public static final audio.policy.configuration.V4_0.Stream AUDIO_STREAM_VOICE_CALL;
+  }
+
+  public final class Version extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V4_0.Version valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V4_0.Version[] values();
+    enum_constant public static final audio.policy.configuration.V4_0.Version _1_0;
+  }
+
+  public class Volume {
+    ctor public Volume();
+    method public audio.policy.configuration.V4_0.DeviceCategory getDeviceCategory();
+    method public java.util.List<java.lang.String> getPoint();
+    method public java.lang.String getRef();
+    method public audio.policy.configuration.V4_0.Stream getStream();
+    method public void setDeviceCategory(audio.policy.configuration.V4_0.DeviceCategory);
+    method public void setRef(java.lang.String);
+    method public void setStream(audio.policy.configuration.V4_0.Stream);
+  }
+
+  public class Volumes {
+    ctor public Volumes();
+    method public java.util.List<audio.policy.configuration.V4_0.Reference> getReference();
+    method public java.util.List<audio.policy.configuration.V4_0.Volume> getVolume();
+  }
+
+  public class XmlParser {
+    ctor public XmlParser();
+    method public static audio.policy.configuration.V4_0.AudioPolicyConfiguration read(java.io.InputStream) throws javax.xml.datatype.DatatypeConfigurationException, java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static java.lang.String readText(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static void skip(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+  }
+
+}
+
diff --git a/audio/4.0/config/api/last_current.txt b/audio/4.0/config/api/last_current.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/4.0/config/api/last_current.txt
diff --git a/audio/4.0/config/api/last_removed.txt b/audio/4.0/config/api/last_removed.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/4.0/config/api/last_removed.txt
diff --git a/audio/4.0/config/api/removed.txt b/audio/4.0/config/api/removed.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/4.0/config/api/removed.txt
diff --git a/audio/5.0/Android.bp b/audio/5.0/Android.bp
new file mode 100644
index 0000000..27c1ef5
--- /dev/null
+++ b/audio/5.0/Android.bp
@@ -0,0 +1,48 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.audio@5.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IDevice.hal",
+        "IDevicesFactory.hal",
+        "IPrimaryDevice.hal",
+        "IStream.hal",
+        "IStreamIn.hal",
+        "IStreamOut.hal",
+        "IStreamOutCallback.hal",
+    ],
+    interfaces: [
+        "android.hardware.audio.common@5.0",
+        "android.hardware.audio.effect@5.0",
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "AudioDrain",
+        "AudioFrequencyResponsePoint",
+        "AudioMicrophoneChannelMapping",
+        "AudioMicrophoneCoordinate",
+        "AudioMicrophoneDirectionality",
+        "AudioMicrophoneLocation",
+        "DeviceAddress",
+        "MessageQueueFlagBits",
+        "MicrophoneInfo",
+        "MmapBufferFlag",
+        "MmapBufferInfo",
+        "MmapPosition",
+        "ParameterValue",
+        "PlaybackTrackMetadata",
+        "RecordTrackMetadata",
+        "Result",
+        "SinkMetadata",
+        "SourceMetadata",
+        "TimeSpec",
+    ],
+    gen_java: false,
+    gen_java_constants: true,
+}
+
diff --git a/audio/5.0/IDevice.hal b/audio/5.0/IDevice.hal
new file mode 100644
index 0000000..afb4fad
--- /dev/null
+++ b/audio/5.0/IDevice.hal
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+import android.hardware.audio.common@5.0;
+import IStreamIn;
+import IStreamOut;
+
+interface IDevice {
+    /**
+     * Returns whether the audio hardware interface has been initialized.
+     *
+     * @return retval OK on success, NOT_INITIALIZED on failure.
+     */
+    initCheck() generates (Result retval);
+
+    /**
+     * Sets the audio volume for all audio activities other than voice call. If
+     * NOT_SUPPORTED is returned, the software mixer will emulate this
+     * capability.
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setMasterVolume(float volume) generates (Result retval);
+
+    /**
+     * Get the current master volume value for the HAL, if the HAL supports
+     * master volume control. For example, AudioFlinger will query this value
+     * from the primary audio HAL when the service starts and use the value for
+     * setting the initial master volume across all HALs. HALs which do not
+     * support this method must return NOT_SUPPORTED in 'retval'.
+     *
+     * @return retval operation completion status.
+     * @return volume 1.0f means unity, 0.0f is zero.
+     */
+    getMasterVolume() generates (Result retval, float volume);
+
+    /**
+     * Sets microphone muting state.
+     *
+     * @param mute whether microphone is muted.
+     * @return retval operation completion status.
+     */
+    setMicMute(bool mute) generates (Result retval);
+
+    /**
+     * Gets whether microphone is muted.
+     *
+     * @return retval operation completion status.
+     * @return mute whether microphone is muted.
+     */
+    getMicMute() generates (Result retval, bool mute);
+
+    /**
+     * Set the audio mute status for all audio activities. If the return value
+     * is NOT_SUPPORTED, the software mixer will emulate this capability.
+     *
+     * @param mute whether audio is muted.
+     * @return retval operation completion status.
+     */
+    setMasterMute(bool mute) generates (Result retval);
+
+    /**
+     * Get the current master mute status for the HAL, if the HAL supports
+     * master mute control. AudioFlinger will query this value from the primary
+     * audio HAL when the service starts and use the value for setting the
+     * initial master mute across all HALs. HAL must indicate that the feature
+     * is not supported by returning NOT_SUPPORTED status.
+     *
+     * @return retval operation completion status.
+     * @return mute whether audio is muted.
+     */
+    getMasterMute() generates (Result retval, bool mute);
+
+    /**
+     * Returns audio input buffer size according to parameters passed or
+     * INVALID_ARGUMENTS if one of the parameters is not supported.
+     *
+     * @param config audio configuration.
+     * @return retval operation completion status.
+     * @return bufferSize input buffer size in bytes.
+     */
+    getInputBufferSize(AudioConfig config)
+            generates (Result retval, uint64_t bufferSize);
+
+    /**
+     * This method creates and opens the audio hardware output stream.
+     * If the stream can not be opened with the proposed audio config,
+     * HAL must provide suggested values for the audio config.
+     *
+     * @param ioHandle handle assigned by AudioFlinger.
+     * @param device device type and (if needed) address.
+     * @param config stream configuration.
+     * @param flags additional flags.
+     * @param sourceMetadata Description of the audio that will be played.
+                             May be used by implementations to configure hardware effects.
+     * @return retval operation completion status.
+     * @return outStream created output stream.
+     * @return suggestedConfig in case of invalid parameters, suggested config.
+     */
+    openOutputStream(
+            AudioIoHandle ioHandle,
+            DeviceAddress device,
+            AudioConfig config,
+            bitfield<AudioOutputFlag> flags,
+            SourceMetadata sourceMetadata) generates (
+                    Result retval,
+                    IStreamOut outStream,
+                    AudioConfig suggestedConfig);
+
+    /**
+     * This method creates and opens the audio hardware input stream.
+     * If the stream can not be opened with the proposed audio config,
+     * HAL must provide suggested values for the audio config.
+     *
+     * @param ioHandle handle assigned by AudioFlinger.
+     * @param device device type and (if needed) address.
+     * @param config stream configuration.
+     * @param flags additional flags.
+     * @param sinkMetadata Description of the audio that is suggested by the client.
+     *                     May be used by implementations to configure hardware effects.
+     * @return retval operation completion status.
+     * @return inStream in case of success, created input stream.
+     * @return suggestedConfig in case of invalid parameters, suggested config.
+     */
+    openInputStream(
+            AudioIoHandle ioHandle,
+            DeviceAddress device,
+            AudioConfig config,
+            bitfield<AudioInputFlag> flags,
+            SinkMetadata sinkMetadata) generates (
+                    Result retval,
+                    IStreamIn inStream,
+                    AudioConfig suggestedConfig);
+
+    /**
+     * Returns whether HAL supports audio patches.
+     *
+     * @return supports true if audio patches are supported.
+     */
+    supportsAudioPatches() generates (bool supports);
+
+    /**
+     * Creates an audio patch between several source and sink ports.  The handle
+     * is allocated by the HAL and must be unique for this audio HAL module.
+     *
+     * @param sources patch sources.
+     * @param sinks patch sinks.
+     * @return retval operation completion status.
+     * @return patch created patch handle.
+     */
+    createAudioPatch(vec<AudioPortConfig> sources, vec<AudioPortConfig> sinks)
+            generates (Result retval, AudioPatchHandle patch);
+
+    /**
+     * Release an audio patch.
+     *
+     * @param patch patch handle.
+     * @return retval operation completion status.
+     */
+    releaseAudioPatch(AudioPatchHandle patch) generates (Result retval);
+
+    /**
+     * Returns the list of supported attributes for a given audio port.
+     *
+     * As input, 'port' contains the information (type, role, address etc...)
+     * needed by the HAL to identify the port.
+     *
+     * As output, 'resultPort' contains possible attributes (sampling rates,
+     * formats, channel masks, gain controllers...) for this port.
+     *
+     * @param port port identifier.
+     * @return retval operation completion status.
+     * @return resultPort port descriptor with all parameters filled up.
+     */
+    getAudioPort(AudioPort port)
+            generates (Result retval, AudioPort resultPort);
+
+    /**
+     * Set audio port configuration.
+     *
+     * @param config audio port configuration.
+     * @return retval operation completion status.
+     */
+    setAudioPortConfig(AudioPortConfig config) generates (Result retval);
+
+    /**
+     * Gets the HW synchronization source of the device. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_HW_AV_SYNC on the legacy HAL.
+     * Optional method
+     *
+     * @return retval operation completion status: OK or NOT_SUPPORTED.
+     * @return hwAvSync HW synchronization source
+     */
+    getHwAvSync() generates (Result retval, AudioHwSync hwAvSync);
+
+    /**
+     * Sets whether the screen is on. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_KEY_SCREEN_STATE on the legacy HAL.
+     * Optional method
+     *
+     * @param turnedOn whether the screen is turned on.
+     * @return retval operation completion status.
+     */
+    setScreenState(bool turnedOn) generates (Result retval);
+
+    /**
+     * Generic method for retrieving vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be retrieved at the same time.
+     * The implementation should return as many requested parameters
+     * as possible, even if one or more is not supported
+     *
+     * @param context provides more information about the request
+     * @param keys keys of the requested parameters
+     * @return retval operation completion status.
+     *         OK must be returned if keys is empty.
+     *         NOT_SUPPORTED must be returned if at least one key is unknown.
+     * @return parameters parameter key value pairs.
+     *         Must contain the value of all requested keys if retval == OK
+     */
+    getParameters(vec<ParameterValue> context, vec<string> keys)
+            generates (Result retval, vec<ParameterValue> parameters);
+
+    /**
+     * Generic method for setting vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be set at the same time though this is
+     * discouraged as it make failure analysis harder.
+     *
+     * If possible, a failed setParameters should not impact the platform state.
+     *
+     * @param context provides more information about the request
+     * @param parameters parameter key value pairs.
+     * @return retval operation completion status.
+     *         All parameters must be successfully set for OK to be returned
+     */
+    setParameters(vec<ParameterValue> context, vec<ParameterValue> parameters)
+            generates (Result retval);
+
+    /**
+     * Returns an array with available microphones in device.
+     *
+     * @return retval INVALID_STATE if the call is not successful,
+     *                OK otherwise.
+     *
+     * @return microphones array with microphones info
+     */
+    getMicrophones()
+         generates(Result retval, vec<MicrophoneInfo> microphones);
+
+    /**
+     * Notifies the device module about the connection state of an input/output
+     * device attached to it. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_DEVICE_[DIS]CONNECT on the legacy HAL.
+     *
+     * @param address audio device specification.
+     * @param connected whether the device is connected.
+     * @return retval operation completion status.
+     */
+    setConnectedState(DeviceAddress address, bool connected)
+            generates (Result retval);
+};
diff --git a/audio/5.0/IDevicesFactory.hal b/audio/5.0/IDevicesFactory.hal
new file mode 100644
index 0000000..92060e7
--- /dev/null
+++ b/audio/5.0/IDevicesFactory.hal
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+import android.hardware.audio.common@5.0;
+import IDevice;
+import IPrimaryDevice;
+
+/** This factory allows a HAL implementation to be split in multiple independent
+ *  devices (called module in the pre-treble API).
+ *  Note that this division is arbitrary and implementation are free
+ *  to only have a Primary.
+ *  The framework will query the devices according to audio_policy_configuration.xml
+ *
+ *  Each device name is arbitrary, provided by the vendor's audio_policy_configuration.xml
+ *  and only used to identify a device in this factory.
+ *  The framework must not interpret the name, treating it as a vendor opaque data
+ *  with the following exception:
+ *  - the "r_submix" device that must be present to support policyMixes (Eg: Android projected).
+ *    Note that this Device is included by default in a build derived from AOSP.
+ *
+ *  Note that on AOSP Oreo (including MR1) the "a2dp" module is not using this API
+ *  but is loaded directly from the system partition using the legacy API
+ *  due to limitations with the Bluetooth framework.
+ */
+interface IDevicesFactory {
+
+    /**
+     * Opens an audio device. To close the device, it is necessary to release
+     * references to the returned device object.
+     *
+     * @param device device name.
+     * @return retval operation completion status. Returns INVALID_ARGUMENTS
+     *         if there is no corresponding hardware module found,
+     *         NOT_INITIALIZED if an error occured while opening the hardware
+     *         module.
+     * @return result the interface for the created device.
+     */
+    openDevice(string device) generates (Result retval, IDevice result);
+
+    /**
+     * Opens the Primary audio device that must be present.
+     * This function is not optional and must return successfully the primary device.
+     *
+     * This device must have the name "primary".
+     *
+     * The telephony stack uses this device to control the audio during a voice call.
+     *
+     * @return retval operation completion status. Must be SUCCESS.
+     *         For debuging, return INVALID_ARGUMENTS if there is no corresponding
+     *         hardware module found, NOT_INITIALIZED if an error occurred
+     *         while opening the hardware module.
+     * @return result the interface for the created device.
+     */
+    openPrimaryDevice() generates (Result retval, IPrimaryDevice result);
+};
diff --git a/audio/5.0/IPrimaryDevice.hal b/audio/5.0/IPrimaryDevice.hal
new file mode 100644
index 0000000..60add5a
--- /dev/null
+++ b/audio/5.0/IPrimaryDevice.hal
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+import android.hardware.audio.common@5.0;
+import IDevice;
+
+interface IPrimaryDevice extends IDevice {
+    /**
+     * Sets the audio volume of a voice call.
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setVoiceVolume(float volume) generates (Result retval);
+
+    /**
+     * This method is used to notify the HAL about audio mode changes.
+     *
+     * @param mode new mode.
+     * @return retval operation completion status.
+     */
+    setMode(AudioMode mode) generates (Result retval);
+
+    /**
+     * Sets the name of the current BT SCO headset. Calling this method
+     * is equivalent to setting legacy "bt_headset_name" parameter.
+     * The BT SCO headset name must only be used for debugging purposes.
+     * Optional method
+     *
+     * @param name the name of the current BT SCO headset (can be empty).
+     * @return retval operation completion status.
+     */
+    setBtScoHeadsetDebugName(string name) generates (Result retval);
+
+    /**
+     * Gets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+     * Calling this method is equivalent to getting AUDIO_PARAMETER_KEY_BT_NREC
+     * on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT SCO NR + EC are enabled.
+     */
+    getBtScoNrecEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+     * Calling this method is equivalent to setting AUDIO_PARAMETER_KEY_BT_NREC
+     * on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether BT SCO NR + EC are enabled.
+     * @return retval operation completion status.
+     */
+    setBtScoNrecEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Gets whether BT SCO Wideband mode is enabled. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT Wideband is enabled.
+     */
+    getBtScoWidebandEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether BT SCO Wideband mode is enabled. Calling this method is
+     * equivalent to setting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether BT Wideband is enabled.
+     * @return retval operation completion status.
+     */
+    setBtScoWidebandEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Gets whether BT HFP (Hands-Free Profile) is enabled. Calling this method
+     * is equivalent to getting "hfp_enable" parameter value on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether BT HFP is enabled.
+     */
+    getBtHfpEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether BT HFP (Hands-Free Profile) is enabled. Calling this method
+     * is equivalent to setting "hfp_enable" parameter on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether BT HFP is enabled.
+     * @return retval operation completion status.
+     */
+    setBtHfpEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Sets the sampling rate of BT HFP (Hands-Free Profile). Calling this
+     * method is equivalent to setting "hfp_set_sampling_rate" parameter
+     * on the legacy HAL.
+     * Optional method
+     *
+     * @param sampleRateHz sample rate in Hz.
+     * @return retval operation completion status.
+     */
+    setBtHfpSampleRate(uint32_t sampleRateHz) generates (Result retval);
+
+    /**
+     * Sets the current output volume Hz for BT HFP (Hands-Free Profile).
+     * Calling this method is equivalent to setting "hfp_volume" parameter value
+     * on the legacy HAL (except that legacy HAL implementations expect
+     * an integer value in the range from 0 to 15.)
+     * Optional method
+     *
+     * @param volume 1.0f means unity, 0.0f is zero.
+     * @return retval operation completion status.
+     */
+    setBtHfpVolume(float volume) generates (Result retval);
+
+    enum TtyMode : int32_t {
+        OFF,
+        VCO,
+        HCO,
+        FULL
+    };
+
+    /**
+     * Gets current TTY mode selection. Calling this method is equivalent to
+     * getting AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return mode TTY mode.
+     */
+    getTtyMode() generates (Result retval, TtyMode mode);
+
+    /**
+     * Sets current TTY mode. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+     *
+     * @param mode TTY mode.
+     * @return retval operation completion status.
+     */
+    setTtyMode(TtyMode mode) generates (Result retval);
+
+    /**
+     * Gets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+     * enabled. Calling this method is equivalent to getting
+     * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+     *
+     * @return retval operation completion status.
+     * @return enabled whether HAC mode is enabled.
+     */
+    getHacEnabled() generates (Result retval, bool enabled);
+
+    /**
+     * Sets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+     * enabled. Calling this method is equivalent to setting
+     * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+     * Optional method
+     *
+     * @param enabled whether HAC mode is enabled.
+     * @return retval operation completion status.
+     */
+    setHacEnabled(bool enabled) generates (Result retval);
+
+    enum Rotation : int32_t {
+        DEG_0,
+        DEG_90,
+        DEG_180,
+        DEG_270
+    };
+
+    /**
+     * Updates HAL on the current rotation of the device relative to natural
+     * orientation. Calling this method is equivalent to setting legacy
+     * parameter "rotation".
+     *
+     * @param rotation rotation in degrees relative to natural device
+     *     orientation.
+     * @return retval operation completion status.
+     */
+    updateRotation(Rotation rotation) generates (Result retval);
+};
diff --git a/audio/5.0/IStream.hal b/audio/5.0/IStream.hal
new file mode 100644
index 0000000..0f975b6
--- /dev/null
+++ b/audio/5.0/IStream.hal
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+import android.hardware.audio.common@5.0;
+import android.hardware.audio.effect@5.0::IEffect;
+
+interface IStream {
+    /**
+     * Return the frame size (number of bytes per sample).
+     *
+     * @return frameSize frame size in bytes.
+     */
+    getFrameSize() generates (uint64_t frameSize);
+
+    /**
+     * Return the frame count of the buffer. Calling this method is equivalent
+     * to getting AUDIO_PARAMETER_STREAM_FRAME_COUNT on the legacy HAL.
+     *
+     * @return count frame count.
+     */
+    getFrameCount() generates (uint64_t count);
+
+    /**
+     * Return the size of input/output buffer in bytes for this stream.
+     * It must be a multiple of the frame size.
+     *
+     * @return buffer buffer size in bytes.
+     */
+    getBufferSize() generates (uint64_t bufferSize);
+
+    /**
+     * Return the sampling rate in Hz.
+     *
+     * @return sampleRateHz sample rate in Hz.
+     */
+    getSampleRate() generates (uint32_t sampleRateHz);
+
+    /**
+     * Return supported native sampling rates of the stream for a given format.
+     * A supported native sample rate is a sample rate that can be efficiently
+     * played by the hardware (typically without sample-rate conversions).
+     *
+     * This function is only called for dynamic profile. If called for
+     * non-dynamic profile is should return NOT_SUPPORTED or the same list
+     * as in audio_policy_configuration.xml.
+     *
+     * Calling this method is equivalent to getting
+     * AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES on the legacy HAL.
+     *
+     *
+     * @param format audio format for which the sample rates are supported.
+     * @return retval operation completion status.
+     *                Must be OK if the format is supported.
+     * @return sampleRateHz supported sample rates.
+     */
+    getSupportedSampleRates(AudioFormat format)
+            generates (Result retval, vec<uint32_t> sampleRates);
+
+    /**
+     * Sets the sampling rate of the stream. Calling this method is equivalent
+     * to setting AUDIO_PARAMETER_STREAM_SAMPLING_RATE on the legacy HAL.
+     * Optional method. If implemented, only called on a stopped stream.
+     *
+     * @param sampleRateHz sample rate in Hz.
+     * @return retval operation completion status.
+     */
+    setSampleRate(uint32_t sampleRateHz) generates (Result retval);
+
+    /**
+     * Return the channel mask of the stream.
+     *
+     * @return mask channel mask.
+     */
+    getChannelMask() generates (bitfield<AudioChannelMask> mask);
+
+    /**
+     * Return supported channel masks of the stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_CHANNELS on the legacy
+     * HAL.
+     *
+     * @param format audio format for which the channel masks are supported.
+     * @return retval operation completion status.
+     *                Must be OK if the format is supported.
+     * @return masks supported audio masks.
+     */
+    getSupportedChannelMasks(AudioFormat format)
+            generates (Result retval, vec<bitfield<AudioChannelMask>> masks);
+
+    /**
+     * Sets the channel mask of the stream. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_STREAM_CHANNELS on the legacy HAL.
+     * Optional method
+     *
+     * @param format audio format.
+     * @return retval operation completion status.
+     */
+    setChannelMask(bitfield<AudioChannelMask> mask) generates (Result retval);
+
+    /**
+     * Return the audio format of the stream.
+     *
+     * @return format audio format.
+     */
+    getFormat() generates (AudioFormat format);
+
+    /**
+     * Return supported audio formats of the stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_FORMATS on the legacy
+     * HAL.
+     *
+     * @return formats supported audio formats.
+     */
+    getSupportedFormats() generates (vec<AudioFormat> formats);
+
+    /**
+     * Sets the audio format of the stream. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_STREAM_FORMAT on the legacy HAL.
+     * Optional method
+     *
+     * @param format audio format.
+     * @return retval operation completion status.
+     */
+    setFormat(AudioFormat format) generates (Result retval);
+
+    /**
+     * Convenience method for retrieving several stream parameters in
+     * one transaction.
+     *
+     * @return sampleRateHz sample rate in Hz.
+     * @return mask channel mask.
+     * @return format audio format.
+     */
+    getAudioProperties() generates (
+            uint32_t sampleRateHz, bitfield<AudioChannelMask> mask, AudioFormat format);
+
+    /**
+     * Applies audio effect to the stream.
+     *
+     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
+     *                 the effect to apply.
+     * @return retval operation completion status.
+     */
+    addEffect(uint64_t effectId) generates (Result retval);
+
+    /**
+     * Stops application of the effect to the stream.
+     *
+     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
+     *                 the effect to remove.
+     * @return retval operation completion status.
+     */
+    removeEffect(uint64_t effectId) generates (Result retval);
+
+    /**
+     * Put the audio hardware input/output into standby mode.
+     * Driver must exit from standby mode at the next I/O operation.
+     *
+     * @return retval operation completion status.
+     */
+    standby() generates (Result retval);
+
+    /**
+     * Return the set of devices which this stream is connected to.
+     * Optional method
+     *
+     * @return retval operation completion status: OK or NOT_SUPPORTED.
+     * @return device set of devices which this stream is connected to.
+     */
+    getDevices() generates (Result retval, vec<DeviceAddress> devices);
+
+    /**
+     * Connects the stream to one or multiple devices.
+     *
+     * This method must only be used for HALs that do not support
+     * 'IDevice.createAudioPatch' method. Calling this method is
+     * equivalent to setting AUDIO_PARAMETER_STREAM_ROUTING preceeded
+     * with a device address in the legacy HAL interface.
+     *
+     * @param address device to connect the stream to.
+     * @return retval operation completion status.
+     */
+    setDevices(vec<DeviceAddress> devices) generates (Result retval);
+
+    /**
+     * Sets the HW synchronization source. Calling this method is equivalent to
+     * setting AUDIO_PARAMETER_STREAM_HW_AV_SYNC on the legacy HAL.
+     * Optional method
+     *
+     * @param hwAvSync HW synchronization source
+     * @return retval operation completion status.
+     */
+    setHwAvSync(AudioHwSync hwAvSync) generates (Result retval);
+
+    /**
+     * Generic method for retrieving vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be retrieved at the same time.
+     * The implementation should return as many requested parameters
+     * as possible, even if one or more is not supported
+     *
+     * @param context provides more information about the request
+     * @param keys keys of the requested parameters
+     * @return retval operation completion status.
+     *         OK must be returned if keys is empty.
+     *         NOT_SUPPORTED must be returned if at least one key is unknown.
+     * @return parameters parameter key value pairs.
+     *         Must contain the value of all requested keys if retval == OK
+     */
+    getParameters(vec<ParameterValue> context, vec<string> keys)
+            generates (Result retval, vec<ParameterValue> parameters);
+
+    /**
+     * Generic method for setting vendor-specific parameter values.
+     * The framework does not interpret the parameters, they are passed
+     * in an opaque manner between a vendor application and HAL.
+     *
+     * Multiple parameters can be set at the same time though this is
+     * discouraged as it make failure analysis harder.
+     *
+     * If possible, a failed setParameters should not impact the platform state.
+     *
+     * @param context provides more information about the request
+     * @param parameters parameter key value pairs.
+     * @return retval operation completion status.
+     *         All parameters must be successfully set for OK to be returned
+     */
+    setParameters(vec<ParameterValue> context, vec<ParameterValue> parameters)
+            generates (Result retval);
+
+    /**
+     * Called by the framework to start a stream operating in mmap mode.
+     * createMmapBuffer() must be called before calling start().
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                INVALID_STATE if called out of sequence
+     */
+    start() generates (Result retval);
+
+    /**
+     * Called by the framework to stop a stream operating in mmap mode.
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @return retval OK in case the succes.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                INVALID_STATE if called out of sequence
+     */
+    stop() generates (Result retval) ;
+
+    /**
+     * Called by the framework to retrieve information on the mmap buffer used for audio
+     * samples transfer.
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @param minSizeFrames minimum buffer size requested. The actual buffer
+     *                     size returned in struct MmapBufferInfo can be larger.
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                NOT_INITIALIZED in case of memory allocation error
+     *                INVALID_ARGUMENTS if the requested buffer size is too large
+     *                INVALID_STATE if called out of sequence
+     * @return info    a MmapBufferInfo struct containing information on the MMMAP buffer created.
+     */
+    createMmapBuffer(int32_t minSizeFrames)
+            generates (Result retval, MmapBufferInfo info);
+
+    /**
+     * Called by the framework to read current read/write position in the mmap buffer
+     * with associated time stamp.
+     * Function only implemented by streams operating in mmap mode.
+     *
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED on non mmap mode streams
+     *                INVALID_STATE if called out of sequence
+     * @return position a MmapPosition struct containing current HW read/write position in frames
+     *                  with associated time stamp.
+     */
+    getMmapPosition()
+            generates (Result retval, MmapPosition position);
+
+    /**
+     * Called by the framework to deinitialize the stream and free up
+     * all the currently allocated resources. It is recommended to close
+     * the stream on the client side as soon as it is becomes unused.
+     *
+     * @return retval OK in case the success.
+     *                NOT_SUPPORTED if called on IStream instead of input or
+     *                              output stream interface.
+     *                INVALID_STATE if the stream was already closed.
+     */
+    close() generates (Result retval);
+};
diff --git a/audio/5.0/IStreamIn.hal b/audio/5.0/IStreamIn.hal
new file mode 100644
index 0000000..d33cfdc
--- /dev/null
+++ b/audio/5.0/IStreamIn.hal
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+import android.hardware.audio.common@5.0;
+import IStream;
+
+interface IStreamIn extends IStream {
+    /**
+     * Returns the source descriptor of the input stream. Calling this method is
+     * equivalent to getting AUDIO_PARAMETER_STREAM_INPUT_SOURCE on the legacy
+     * HAL.
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return source audio source.
+     */
+    getAudioSource() generates (Result retval, AudioSource source);
+
+    /**
+     * Set the input gain for the audio driver.
+     * Optional method
+     *
+     * @param gain 1.0f is unity, 0.0f is zero.
+     * @result retval operation completion status.
+     */
+    setGain(float gain) generates (Result retval);
+
+    /**
+     * Commands that can be executed on the driver reader thread.
+     */
+    enum ReadCommand : int32_t {
+        READ,
+        GET_CAPTURE_POSITION
+    };
+
+    /**
+     * Data structure passed to the driver for executing commands
+     * on the driver reader thread.
+     */
+    struct ReadParameters {
+        ReadCommand command;  // discriminator
+        union Params {
+            uint64_t read;    // READ command, amount of bytes to read, >= 0.
+            // No parameters for GET_CAPTURE_POSITION.
+        } params;
+    };
+
+    /**
+     * Data structure passed back to the client via status message queue
+     * of 'read' operation.
+     *
+     * Possible values of 'retval' field:
+     *  - OK, read operation was successful;
+     *  - INVALID_ARGUMENTS, stream was not configured properly;
+     *  - INVALID_STATE, stream is in a state that doesn't allow reads.
+     */
+    struct ReadStatus {
+        Result retval;
+        ReadCommand replyTo;  // discriminator
+        union Reply {
+            uint64_t read;    // READ command, amount of bytes read, >= 0.
+            struct CapturePosition { // same as generated by getCapturePosition.
+                uint64_t frames;
+                uint64_t time;
+            } capturePosition;
+        } reply;
+    };
+
+    /**
+     * Called when the metadata of the stream's sink has been changed.
+     * @param sinkMetadata Description of the audio that is suggested by the clients.
+     */
+    updateSinkMetadata(SinkMetadata sinkMetadata);
+
+    /**
+     * Set up required transports for receiving audio buffers from the driver.
+     *
+     * The transport consists of three message queues:
+     *  -- command queue is used to instruct the reader thread what operation
+     *     to perform;
+     *  -- data queue is used for passing audio data from the driver
+     *     to the client;
+     *  -- status queue is used for reporting operation status
+     *     (e.g. amount of bytes actually read or error code).
+     *
+     * The driver operates on a dedicated thread. The client must ensure that
+     * the thread is given an appropriate priority and assigned to correct
+     * scheduler and cgroup. For this purpose, the method returns identifiers
+     * of the driver thread.
+     *
+     * @param frameSize the size of a single frame, in bytes.
+     * @param framesCount the number of frames in a buffer.
+     * @param threadPriority priority of the driver thread.
+     * @return retval OK if both message queues were created successfully.
+     *                INVALID_STATE if the method was already called.
+     *                INVALID_ARGUMENTS if there was a problem setting up
+     *                                  the queues.
+     * @return commandMQ a message queue used for passing commands.
+     * @return dataMQ a message queue used for passing audio data in the format
+     *                specified at the stream opening.
+     * @return statusMQ a message queue used for passing status from the driver
+     *                  using ReadStatus structures.
+     * @return threadInfo identifiers of the driver's dedicated thread.
+     */
+    prepareForReading(uint32_t frameSize, uint32_t framesCount)
+    generates (
+            Result retval,
+            fmq_sync<ReadParameters> commandMQ,
+            fmq_sync<uint8_t> dataMQ,
+            fmq_sync<ReadStatus> statusMQ,
+            ThreadInfo threadInfo);
+
+    /**
+     * Return the amount of input frames lost in the audio driver since the last
+     * call of this function.
+     *
+     * Audio driver is expected to reset the value to 0 and restart counting
+     * upon returning the current value by this function call. Such loss
+     * typically occurs when the user space process is blocked longer than the
+     * capacity of audio driver buffers.
+     *
+     * @return framesLost the number of input audio frames lost.
+     */
+    getInputFramesLost() generates (uint32_t framesLost);
+
+    /**
+     * Return a recent count of the number of audio frames received and the
+     * clock time associated with that frame count.
+     *
+     * @return retval INVALID_STATE if the device is not ready/available,
+     *                NOT_SUPPORTED if the command is not supported,
+     *                OK otherwise.
+     * @return frames the total frame count received. This must be as early in
+     *                the capture pipeline as possible. In general, frames
+     *                must be non-negative and must not go "backwards".
+     * @return time is the clock monotonic time when frames was measured. In
+     *              general, time must be a positive quantity and must not
+     *              go "backwards".
+     */
+    getCapturePosition()
+            generates (Result retval, uint64_t frames, uint64_t time);
+
+    /**
+     * Returns an array with active microphones in the stream.
+     *
+     * @return retval INVALID_STATE if the call is not successful,
+     *                OK otherwise.
+     *
+     * @return microphones array with microphones info
+     */
+    getActiveMicrophones()
+               generates(Result retval, vec<MicrophoneInfo> microphones);
+};
diff --git a/audio/5.0/IStreamOut.hal b/audio/5.0/IStreamOut.hal
new file mode 100644
index 0000000..119a642
--- /dev/null
+++ b/audio/5.0/IStreamOut.hal
@@ -0,0 +1,279 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+import android.hardware.audio.common@5.0;
+import IStream;
+import IStreamOutCallback;
+
+interface IStreamOut extends IStream {
+    /**
+     * Return the audio hardware driver estimated latency in milliseconds.
+     *
+     * @return latencyMs latency in milliseconds.
+     */
+    getLatency() generates (uint32_t latencyMs);
+
+    /**
+     * This method is used in situations where audio mixing is done in the
+     * hardware. This method serves as a direct interface with hardware,
+     * allowing to directly set the volume as apposed to via the framework.
+     * This method might produce multiple PCM outputs or hardware accelerated
+     * codecs, such as MP3 or AAC.
+     * Optional method
+     *
+     * @param left left channel attenuation, 1.0f is unity, 0.0f is zero.
+     * @param right right channel attenuation, 1.0f is unity, 0.0f is zero.
+     * @return retval operation completion status.
+     *        If a volume is outside [0,1], return INVALID_ARGUMENTS
+     */
+    setVolume(float left, float right) generates (Result retval);
+
+    /**
+     * Commands that can be executed on the driver writer thread.
+     */
+    enum WriteCommand : int32_t {
+        WRITE,
+        GET_PRESENTATION_POSITION,
+        GET_LATENCY
+    };
+
+    /**
+     * Data structure passed back to the client via status message queue
+     * of 'write' operation.
+     *
+     * Possible values of 'retval' field:
+     *  - OK, write operation was successful;
+     *  - INVALID_ARGUMENTS, stream was not configured properly;
+     *  - INVALID_STATE, stream is in a state that doesn't allow writes;
+     *  - INVALID_OPERATION, retrieving presentation position isn't supported.
+     */
+    struct WriteStatus {
+        Result retval;
+        WriteCommand replyTo;  // discriminator
+        union Reply {
+            uint64_t written;  // WRITE command, amount of bytes written, >= 0.
+            struct PresentationPosition {  // same as generated by
+                uint64_t frames;           // getPresentationPosition.
+                TimeSpec timeStamp;
+            } presentationPosition;
+            uint32_t latencyMs; // Same as generated by getLatency.
+        } reply;
+    };
+
+    /**
+     * Called when the metadata of the stream's source has been changed.
+     * @param sourceMetadata Description of the audio that is played by the clients.
+     */
+    updateSourceMetadata(SourceMetadata sourceMetadata);
+
+    /**
+     * Set up required transports for passing audio buffers to the driver.
+     *
+     * The transport consists of three message queues:
+     *  -- command queue is used to instruct the writer thread what operation
+     *     to perform;
+     *  -- data queue is used for passing audio data from the client
+     *     to the driver;
+     *  -- status queue is used for reporting operation status
+     *     (e.g. amount of bytes actually written or error code).
+     *
+     * The driver operates on a dedicated thread. The client must ensure that
+     * the thread is given an appropriate priority and assigned to correct
+     * scheduler and cgroup. For this purpose, the method returns identifiers
+     * of the driver thread.
+     *
+     * @param frameSize the size of a single frame, in bytes.
+     * @param framesCount the number of frames in a buffer.
+     * @return retval OK if both message queues were created successfully.
+     *                INVALID_STATE if the method was already called.
+     *                INVALID_ARGUMENTS if there was a problem setting up
+     *                                  the queues.
+     * @return commandMQ a message queue used for passing commands.
+     * @return dataMQ a message queue used for passing audio data in the format
+     *                specified at the stream opening.
+     * @return statusMQ a message queue used for passing status from the driver
+     *                  using WriteStatus structures.
+     * @return threadInfo identifiers of the driver's dedicated thread.
+     */
+    prepareForWriting(uint32_t frameSize, uint32_t framesCount)
+    generates (
+            Result retval,
+            fmq_sync<WriteCommand> commandMQ,
+            fmq_sync<uint8_t> dataMQ,
+            fmq_sync<WriteStatus> statusMQ,
+            ThreadInfo threadInfo);
+
+    /**
+     * Return the number of audio frames written by the audio DSP to DAC since
+     * the output has exited standby.
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return dspFrames number of audio frames written.
+     */
+    getRenderPosition() generates (Result retval, uint32_t dspFrames);
+
+    /**
+     * Get the local time at which the next write to the audio driver will be
+     * presented. The units are microseconds, where the epoch is decided by the
+     * local audio HAL.
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return timestampUs time of the next write.
+     */
+    getNextWriteTimestamp() generates (Result retval, int64_t timestampUs);
+
+    /**
+     * Set the callback interface for notifying completion of non-blocking
+     * write and drain.
+     *
+     * Calling this function implies that all future 'write' and 'drain'
+     * must be non-blocking and use the callback to signal completion.
+     *
+     * 'clearCallback' method needs to be called in order to release the local
+     * callback proxy on the server side and thus dereference the callback
+     * implementation on the client side.
+     *
+     * @return retval operation completion status.
+     */
+    setCallback(IStreamOutCallback callback) generates (Result retval);
+
+    /**
+     * Clears the callback previously set via 'setCallback' method.
+     *
+     * Warning: failure to call this method results in callback implementation
+     * on the client side being held until the HAL server termination.
+     *
+     * If no callback was previously set, the method should be a no-op
+     * and return OK.
+     *
+     * @return retval operation completion status: OK or NOT_SUPPORTED.
+     */
+    clearCallback() generates (Result retval);
+
+    /**
+     * Returns whether HAL supports pausing and resuming of streams.
+     *
+     * @return supportsPause true if pausing is supported.
+     * @return supportsResume true if resume is supported.
+     */
+    supportsPauseAndResume()
+            generates (bool supportsPause, bool supportsResume);
+
+    /**
+     * Notifies to the audio driver to stop playback however the queued buffers
+     * are retained by the hardware. Useful for implementing pause/resume. Empty
+     * implementation if not supported however must be implemented for hardware
+     * with non-trivial latency. In the pause state, some audio hardware may
+     * still be using power. Client code may consider calling 'suspend' after a
+     * timeout to prevent that excess power usage.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    pause() generates (Result retval);
+
+    /**
+     * Notifies to the audio driver to resume playback following a pause.
+     * Returns error INVALID_STATE if called without matching pause.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    resume() generates (Result retval);
+
+    /**
+     * Returns whether HAL supports draining of streams.
+     *
+     * @return supports true if draining is supported.
+     */
+    supportsDrain() generates (bool supports);
+
+    /**
+     * Requests notification when data buffered by the driver/hardware has been
+     * played. If 'setCallback' has previously been called to enable
+     * non-blocking mode, then 'drain' must not block, instead it must return
+     * quickly and completion of the drain is notified through the callback. If
+     * 'setCallback' has not been called, then 'drain' must block until
+     * completion.
+     *
+     * If 'type' is 'ALL', the drain completes when all previously written data
+     * has been played.
+     *
+     * If 'type' is 'EARLY_NOTIFY', the drain completes shortly before all data
+     * for the current track has played to allow time for the framework to
+     * perform a gapless track switch.
+     *
+     * Drain must return immediately on 'stop' and 'flush' calls.
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @param type type of drain.
+     * @return retval operation completion status.
+     */
+    drain(AudioDrain type) generates (Result retval);
+
+    /**
+     * Notifies to the audio driver to flush the queued data. Stream must
+     * already be paused before calling 'flush'.
+     * Optional method
+     *
+     * Implementation of this function is mandatory for offloaded playback.
+     *
+     * @return retval operation completion status.
+     */
+    flush() generates (Result retval);
+
+    /**
+     * Return a recent count of the number of audio frames presented to an
+     * external observer. This excludes frames which have been written but are
+     * still in the pipeline. The count is not reset to zero when output enters
+     * standby. Also returns the value of CLOCK_MONOTONIC as of this
+     * presentation count. The returned count is expected to be 'recent', but
+     * does not need to be the most recent possible value. However, the
+     * associated time must correspond to whatever count is returned.
+     *
+     * Example: assume that N+M frames have been presented, where M is a 'small'
+     * number. Then it is permissible to return N instead of N+M, and the
+     * timestamp must correspond to N rather than N+M. The terms 'recent' and
+     * 'small' are not defined. They reflect the quality of the implementation.
+     *
+     * Optional method
+     *
+     * @return retval operation completion status.
+     * @return frames count of presented audio frames.
+     * @return timeStamp associated clock time.
+     */
+    getPresentationPosition()
+            generates (Result retval, uint64_t frames, TimeSpec timeStamp);
+
+    /**
+     * Selects a presentation for decoding from a next generation media stream
+     * (as defined per ETSI TS 103 190-2) and a program within the presentation.
+     * Optional method
+     *
+     * @param presentationId selected audio presentation.
+     * @param programId refinement for the presentation.
+     * @return retval operation completion status.
+     */
+    selectPresentation(int32_t presentationId, int32_t programId)
+            generates (Result retval);
+};
diff --git a/audio/5.0/IStreamOutCallback.hal b/audio/5.0/IStreamOutCallback.hal
new file mode 100644
index 0000000..c52a040
--- /dev/null
+++ b/audio/5.0/IStreamOutCallback.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+/**
+ * Asynchronous write callback interface.
+ */
+interface IStreamOutCallback {
+    /**
+     * Non blocking write completed.
+     */
+    oneway onWriteReady();
+
+    /**
+     * Drain completed.
+     */
+    oneway onDrainReady();
+
+    /**
+     * Stream hit an error.
+     */
+    oneway onError();
+};
diff --git a/audio/5.0/config/Android.bp b/audio/5.0/config/Android.bp
new file mode 100644
index 0000000..a3f1c33
--- /dev/null
+++ b/audio/5.0/config/Android.bp
@@ -0,0 +1,7 @@
+
+xsd_config {
+    name: "audio_policy_configuration_V5_0",
+    srcs: ["audio_policy_configuration.xsd"],
+    package_name: "audio.policy.configuration.V5_0",
+}
+
diff --git a/audio/5.0/config/api/current.txt b/audio/5.0/config/api/current.txt
new file mode 100644
index 0000000..4334172
--- /dev/null
+++ b/audio/5.0/config/api/current.txt
@@ -0,0 +1,428 @@
+package audio.policy.configuration.V5_0 {
+
+  public class AttachedDevices {
+    ctor public AttachedDevices();
+    method public java.util.List<java.lang.String> getItem();
+  }
+
+  public final class AudioDevice extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.AudioDevice valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.AudioDevice[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_AMBIENT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_AUX_DIGITAL;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_BACK_MIC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_A2DP;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_BLE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_BUILTIN_MIC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_BUS;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_FM_TUNER;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_HDMI;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_IP;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_LINE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_LOOPBACK;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_PROXY;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_SPDIF;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_STUB;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_TELEPHONY_RX;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_TV_TUNER;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_USB_ACCESSORY;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_USB_DEVICE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_USB_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_VOICE_CALL;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_IN_WIRED_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_NONE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_AUX_DIGITAL;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_AUX_LINE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_BUS;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_DEFAULT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_EARPIECE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_ECHO_CANCELLER;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_FM;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_HDMI;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_HDMI_ARC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_HEARING_AID;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_IP;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_LINE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_PROXY;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_REMOTE_SUBMIX;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_SPDIF;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_SPEAKER;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_SPEAKER_SAFE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_STUB;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_TELEPHONY_TX;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_USB_ACCESSORY;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_USB_DEVICE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_USB_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_WIRED_HEADPHONE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioDevice AUDIO_DEVICE_OUT_WIRED_HEADSET;
+  }
+
+  public final class AudioFormat extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.AudioFormat valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.AudioFormat[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADIF;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_ELD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_ERLC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_HE_V1;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_HE_V2;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_LTP;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_MAIN;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_SCALABLE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_SSR;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ADTS_XHE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ELD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_ERLC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_HE_V1;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_HE_V2;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_LC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_LD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_LTP;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_MAIN;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_SCALABLE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_SSR;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AAC_XHE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AC3;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AC4;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_ALAC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AMR_NB;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AMR_WB;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_AMR_WB_PLUS;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_APE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_APTX;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_APTX_HD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_DOLBY_TRUEHD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_DSD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_DTS;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_DTS_HD;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_EVRC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_EVRCB;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_EVRCNW;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_EVRCWB;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_E_AC3;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_E_AC3_JOC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_FLAC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_HE_AAC_V1;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_HE_AAC_V2;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_IEC61937;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_LDAC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_MAT_1_0;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_MAT_2_0;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_MAT_2_1;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_MP2;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_MP3;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_OPUS;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_PCM_16_BIT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_PCM_24_BIT_PACKED;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_PCM_32_BIT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_PCM_8_24_BIT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_PCM_8_BIT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_PCM_FLOAT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_QCELP;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_SBC;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_VORBIS;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_WMA;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioFormat AUDIO_FORMAT_WMA_PRO;
+  }
+
+  public class AudioPolicyConfiguration {
+    ctor public AudioPolicyConfiguration();
+    method public audio.policy.configuration.V5_0.GlobalConfiguration getGlobalConfiguration();
+    method public java.util.List<audio.policy.configuration.V5_0.Modules> getModules();
+    method public audio.policy.configuration.V5_0.SurroundSound getSurroundSound();
+    method public audio.policy.configuration.V5_0.Version getVersion();
+    method public java.util.List<audio.policy.configuration.V5_0.Volumes> getVolumes();
+    method public void setGlobalConfiguration(audio.policy.configuration.V5_0.GlobalConfiguration);
+    method public void setSurroundSound(audio.policy.configuration.V5_0.SurroundSound);
+    method public void setVersion(audio.policy.configuration.V5_0.Version);
+  }
+
+  public final class AudioUsage extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.AudioUsage valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.AudioUsage[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_ALARM;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_ASSISTANCE_SONIFICATION;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_ASSISTANT;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_GAME;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_MEDIA;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_NOTIFICATION;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_UNKNOWN;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_VIRTUAL_SOURCE;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION;
+    enum_constant public static final audio.policy.configuration.V5_0.AudioUsage AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING;
+  }
+
+  public final class DeviceCategory extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.DeviceCategory valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.DeviceCategory[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.DeviceCategory DEVICE_CATEGORY_EARPIECE;
+    enum_constant public static final audio.policy.configuration.V5_0.DeviceCategory DEVICE_CATEGORY_EXT_MEDIA;
+    enum_constant public static final audio.policy.configuration.V5_0.DeviceCategory DEVICE_CATEGORY_HEADSET;
+    enum_constant public static final audio.policy.configuration.V5_0.DeviceCategory DEVICE_CATEGORY_HEARING_AID;
+    enum_constant public static final audio.policy.configuration.V5_0.DeviceCategory DEVICE_CATEGORY_SPEAKER;
+  }
+
+  public class DevicePorts {
+    ctor public DevicePorts();
+    method public java.util.List<audio.policy.configuration.V5_0.DevicePorts.DevicePort> getDevicePort();
+  }
+
+  public static class DevicePorts.DevicePort {
+    ctor public DevicePorts.DevicePort();
+    method public java.lang.String getAddress();
+    method public audio.policy.configuration.V5_0.Gains getGains();
+    method public java.util.List<audio.policy.configuration.V5_0.Profile> getProfile();
+    method public audio.policy.configuration.V5_0.Role getRole();
+    method public java.lang.String getTagName();
+    method public java.lang.String getType();
+    method public boolean get_default();
+    method public void setAddress(java.lang.String);
+    method public void setGains(audio.policy.configuration.V5_0.Gains);
+    method public void setRole(audio.policy.configuration.V5_0.Role);
+    method public void setTagName(java.lang.String);
+    method public void setType(java.lang.String);
+    method public void set_default(boolean);
+  }
+
+  public final class GainMode extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.GainMode valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.GainMode[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.GainMode AUDIO_GAIN_MODE_CHANNELS;
+    enum_constant public static final audio.policy.configuration.V5_0.GainMode AUDIO_GAIN_MODE_JOINT;
+    enum_constant public static final audio.policy.configuration.V5_0.GainMode AUDIO_GAIN_MODE_RAMP;
+  }
+
+  public class Gains {
+    ctor public Gains();
+    method public java.util.List<audio.policy.configuration.V5_0.Gains.Gain> getGain();
+  }
+
+  public static class Gains.Gain {
+    ctor public Gains.Gain();
+    method public java.lang.String getChannel_mask();
+    method public int getDefaultValueMB();
+    method public int getMaxRampMs();
+    method public int getMaxValueMB();
+    method public int getMinRampMs();
+    method public int getMinValueMB();
+    method public audio.policy.configuration.V5_0.GainMode getMode();
+    method public java.lang.String getName();
+    method public int getStepValueMB();
+    method public void setChannel_mask(java.lang.String);
+    method public void setDefaultValueMB(int);
+    method public void setMaxRampMs(int);
+    method public void setMaxValueMB(int);
+    method public void setMinRampMs(int);
+    method public void setMinValueMB(int);
+    method public void setMode(audio.policy.configuration.V5_0.GainMode);
+    method public void setName(java.lang.String);
+    method public void setStepValueMB(int);
+  }
+
+  public class GlobalConfiguration {
+    ctor public GlobalConfiguration();
+    method public boolean getSpeaker_drc_enabled();
+    method public void setSpeaker_drc_enabled(boolean);
+  }
+
+  public final class HalVersion extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.HalVersion valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.HalVersion[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.HalVersion _2_0;
+    enum_constant public static final audio.policy.configuration.V5_0.HalVersion _3_0;
+  }
+
+  public class MixPorts {
+    ctor public MixPorts();
+    method public java.util.List<audio.policy.configuration.V5_0.MixPorts.MixPort> getMixPort();
+  }
+
+  public static class MixPorts.MixPort {
+    ctor public MixPorts.MixPort();
+    method public java.lang.String getFlags();
+    method public audio.policy.configuration.V5_0.Gains getGains();
+    method public long getMaxActiveCount();
+    method public long getMaxOpenCount();
+    method public java.lang.String getName();
+    method public java.util.List<audio.policy.configuration.V5_0.AudioUsage> getPreferredUsage();
+    method public java.util.List<audio.policy.configuration.V5_0.Profile> getProfile();
+    method public audio.policy.configuration.V5_0.Role getRole();
+    method public void setFlags(java.lang.String);
+    method public void setGains(audio.policy.configuration.V5_0.Gains);
+    method public void setMaxActiveCount(long);
+    method public void setMaxOpenCount(long);
+    method public void setName(java.lang.String);
+    method public void setPreferredUsage(java.util.List<audio.policy.configuration.V5_0.AudioUsage>);
+    method public void setRole(audio.policy.configuration.V5_0.Role);
+  }
+
+  public final class MixType extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.MixType valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.MixType[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.MixType mix;
+    enum_constant public static final audio.policy.configuration.V5_0.MixType mux;
+  }
+
+  public class Modules {
+    ctor public Modules();
+    method public java.util.List<audio.policy.configuration.V5_0.Modules.Module> getModule();
+  }
+
+  public static class Modules.Module {
+    ctor public Modules.Module();
+    method public audio.policy.configuration.V5_0.AttachedDevices getAttachedDevices();
+    method public java.lang.String getDefaultOutputDevice();
+    method public audio.policy.configuration.V5_0.DevicePorts getDevicePorts();
+    method public audio.policy.configuration.V5_0.HalVersion getHalVersion();
+    method public audio.policy.configuration.V5_0.MixPorts getMixPorts();
+    method public java.lang.String getName();
+    method public audio.policy.configuration.V5_0.Routes getRoutes();
+    method public void setAttachedDevices(audio.policy.configuration.V5_0.AttachedDevices);
+    method public void setDefaultOutputDevice(java.lang.String);
+    method public void setDevicePorts(audio.policy.configuration.V5_0.DevicePorts);
+    method public void setHalVersion(audio.policy.configuration.V5_0.HalVersion);
+    method public void setMixPorts(audio.policy.configuration.V5_0.MixPorts);
+    method public void setName(java.lang.String);
+    method public void setRoutes(audio.policy.configuration.V5_0.Routes);
+  }
+
+  public class Profile {
+    ctor public Profile();
+    method public java.lang.String getChannelMasks();
+    method public java.lang.String getFormat();
+    method public java.lang.String getName();
+    method public java.lang.String getSamplingRates();
+    method public void setChannelMasks(java.lang.String);
+    method public void setFormat(java.lang.String);
+    method public void setName(java.lang.String);
+    method public void setSamplingRates(java.lang.String);
+  }
+
+  public class Reference {
+    ctor public Reference();
+    method public java.lang.String getName();
+    method public java.util.List<java.lang.String> getPoint();
+    method public void setName(java.lang.String);
+  }
+
+  public final class Role extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.Role valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.Role[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.Role sink;
+    enum_constant public static final audio.policy.configuration.V5_0.Role source;
+  }
+
+  public class Routes {
+    ctor public Routes();
+    method public java.util.List<audio.policy.configuration.V5_0.Routes.Route> getRoute();
+  }
+
+  public static class Routes.Route {
+    ctor public Routes.Route();
+    method public java.lang.String getSink();
+    method public java.lang.String getSources();
+    method public audio.policy.configuration.V5_0.MixType getType();
+    method public void setSink(java.lang.String);
+    method public void setSources(java.lang.String);
+    method public void setType(audio.policy.configuration.V5_0.MixType);
+  }
+
+  public final class Stream extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.Stream valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.Stream[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_ACCESSIBILITY;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_ALARM;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_BLUETOOTH_SCO;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_DTMF;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_ENFORCED_AUDIBLE;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_MUSIC;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_NOTIFICATION;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_PATCH;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_REROUTING;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_RING;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_SYSTEM;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_TTS;
+    enum_constant public static final audio.policy.configuration.V5_0.Stream AUDIO_STREAM_VOICE_CALL;
+  }
+
+  public class SurroundFormats {
+    ctor public SurroundFormats();
+    method public java.util.List<audio.policy.configuration.V5_0.SurroundFormats.Format> getFormat();
+  }
+
+  public static class SurroundFormats.Format {
+    ctor public SurroundFormats.Format();
+    method public audio.policy.configuration.V5_0.AudioFormat getName();
+    method public java.util.List<audio.policy.configuration.V5_0.AudioFormat> getSubformats();
+    method public void setName(audio.policy.configuration.V5_0.AudioFormat);
+    method public void setSubformats(java.util.List<audio.policy.configuration.V5_0.AudioFormat>);
+  }
+
+  public class SurroundSound {
+    ctor public SurroundSound();
+    method public audio.policy.configuration.V5_0.SurroundFormats getFormats();
+    method public void setFormats(audio.policy.configuration.V5_0.SurroundFormats);
+  }
+
+  public final class Version extends java.lang.Enum {
+    method public java.lang.String getRawName();
+    method public static audio.policy.configuration.V5_0.Version valueOf(java.lang.String);
+    method public static final audio.policy.configuration.V5_0.Version[] values();
+    enum_constant public static final audio.policy.configuration.V5_0.Version _1_0;
+  }
+
+  public class Volume {
+    ctor public Volume();
+    method public audio.policy.configuration.V5_0.DeviceCategory getDeviceCategory();
+    method public java.util.List<java.lang.String> getPoint();
+    method public java.lang.String getRef();
+    method public audio.policy.configuration.V5_0.Stream getStream();
+    method public void setDeviceCategory(audio.policy.configuration.V5_0.DeviceCategory);
+    method public void setRef(java.lang.String);
+    method public void setStream(audio.policy.configuration.V5_0.Stream);
+  }
+
+  public class Volumes {
+    ctor public Volumes();
+    method public java.util.List<audio.policy.configuration.V5_0.Reference> getReference();
+    method public java.util.List<audio.policy.configuration.V5_0.Volume> getVolume();
+  }
+
+  public class XmlParser {
+    ctor public XmlParser();
+    method public static audio.policy.configuration.V5_0.AudioPolicyConfiguration read(java.io.InputStream) throws javax.xml.datatype.DatatypeConfigurationException, java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static java.lang.String readText(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+    method public static void skip(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+  }
+
+}
+
diff --git a/audio/5.0/config/api/last_current.txt b/audio/5.0/config/api/last_current.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/5.0/config/api/last_current.txt
diff --git a/audio/5.0/config/api/last_removed.txt b/audio/5.0/config/api/last_removed.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/5.0/config/api/last_removed.txt
diff --git a/audio/5.0/config/api/removed.txt b/audio/5.0/config/api/removed.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/5.0/config/api/removed.txt
diff --git a/audio/5.0/config/audio_policy_configuration.xsd b/audio/5.0/config/audio_policy_configuration.xsd
new file mode 100644
index 0000000..b0927b2
--- /dev/null
+++ b/audio/5.0/config/audio_policy_configuration.xsd
@@ -0,0 +1,611 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+         Licensed under the Apache License, Version 2.0 (the "License");
+         you may not use this file except in compliance with the License.
+         You may obtain a copy of the License at
+
+                    http://www.apache.org/licenses/LICENSE-2.0
+
+         Unless required by applicable law or agreed to in writing, software
+         distributed under the License is distributed on an "AS IS" BASIS,
+         WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+         See the License for the specific language governing permissions and
+         limitations under the License.
+-->
+<!-- TODO: define a targetNamespace. Note that it will break retrocompatibility -->
+<xs:schema version="2.0"
+           elementFormDefault="qualified"
+           attributeFormDefault="unqualified"
+           xmlns:xs="http://www.w3.org/2001/XMLSchema">
+    <!-- List the config versions supported by audio policy. -->
+    <xs:simpleType name="version">
+        <xs:restriction base="xs:decimal">
+            <xs:enumeration value="1.0"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="halVersion">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Version of the interface the hal implements.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:decimal">
+            <!-- List of HAL versions supported by the framework. -->
+            <xs:enumeration value="2.0"/>
+            <xs:enumeration value="3.0"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:element name="audioPolicyConfiguration">
+        <xs:complexType>
+            <xs:sequence>
+                <xs:element name="globalConfiguration" type="globalConfiguration"/>
+                <xs:element name="modules" type="modules" maxOccurs="unbounded"/>
+                <xs:element name="volumes" type="volumes" maxOccurs="unbounded"/>
+                <xs:element name="surroundSound" type="surroundSound" />
+            </xs:sequence>
+            <xs:attribute name="version" type="version"/>
+        </xs:complexType>
+        <xs:key name="moduleNameKey">
+            <xs:selector xpath="modules/module"/>
+            <xs:field xpath="@name"/>
+        </xs:key>
+        <xs:unique name="volumeTargetUniqueness">
+            <xs:selector xpath="volumes/volume"/>
+            <xs:field xpath="@stream"/>
+            <xs:field xpath="@deviceCategory"/>
+        </xs:unique>
+        <xs:key name="volumeCurveNameKey">
+            <xs:selector xpath="volumes/reference"/>
+            <xs:field xpath="@name"/>
+        </xs:key>
+        <xs:keyref name="volumeCurveRef" refer="volumeCurveNameKey">
+            <xs:selector xpath="volumes/volume"/>
+            <xs:field xpath="@ref"/>
+        </xs:keyref>
+    </xs:element>
+    <xs:complexType name="globalConfiguration">
+        <xs:attribute name="speaker_drc_enabled" type="xs:boolean" use="required"/>
+    </xs:complexType>
+    <xs:complexType name="modules">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                There should be one section per audio HW module present on the platform.
+                Each <module/> contains two mandatory tags: “halVersion” and “name”.
+                The module "name" is the same as in previous .conf file.
+                Each module must contain the following sections:
+                 - <devicePorts/>: a list of device descriptors for all
+                   input and output devices accessible via this module.
+                   This contains both permanently attached devices and removable devices.
+                 - <mixPorts/>: listing all output and input streams exposed by the audio HAL
+                 - <routes/>: list of possible connections between input
+                   and output devices or between stream and devices.
+                   A <route/> is defined by a set of 3 attributes:
+                        -"type": mux|mix means all sources are mutual exclusive (mux) or can be mixed (mix)
+                        -"sink": the sink involved in this route
+                        -"sources": all the sources than can be connected to the sink via this route
+                 - <attachedDevices/>: permanently attached devices.
+                   The attachedDevices section is a list of devices names.
+                   Their names correspond to device names defined in "devicePorts" section.
+                 - <defaultOutputDevice/> is the device to be used when no policy rule applies
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="module" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="attachedDevices" type="attachedDevices" minOccurs="0">
+                            <xs:unique name="attachedDevicesUniqueness">
+                                <xs:selector xpath="item"/>
+                                <xs:field xpath="."/>
+                            </xs:unique>
+                        </xs:element>
+                        <xs:element name="defaultOutputDevice" type="xs:token" minOccurs="0"/>
+                        <xs:element name="mixPorts" type="mixPorts" minOccurs="0"/>
+                        <xs:element name="devicePorts" type="devicePorts" minOccurs="0"/>
+                        <xs:element name="routes" type="routes" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="name" type="xs:string" use="required"/>
+                    <xs:attribute name="halVersion" type="halVersion" use="required"/>
+                </xs:complexType>
+                <xs:unique name="mixPortNameUniqueness">
+                    <xs:selector xpath="mixPorts/mixPort"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+                <xs:key name="devicePortNameKey">
+                    <xs:selector xpath="devicePorts/devicePort"/>
+                    <xs:field xpath="@tagName"/>
+                </xs:key>
+                <xs:unique name="devicePortUniqueness">
+                    <xs:selector xpath="devicePorts/devicePort"/>
+                    <xs:field xpath="@type"/>
+                    <xs:field xpath="@address"/>
+                </xs:unique>
+                <xs:keyref name="defaultOutputDeviceRef" refer="devicePortNameKey">
+                    <xs:selector xpath="defaultOutputDevice"/>
+                    <xs:field xpath="."/>
+                </xs:keyref>
+                <xs:keyref name="attachedDeviceRef" refer="devicePortNameKey">
+                    <xs:selector xpath="attachedDevices/item"/>
+                    <xs:field xpath="."/>
+                </xs:keyref>
+                <!-- The following 3 constraints try to make sure each sink port
+                     is reference in one an only one route. -->
+                <xs:key name="routeSinkKey">
+                    <!-- predicate [@type='sink'] does not work in xsd 1.0 -->
+                    <xs:selector xpath="devicePorts/devicePort|mixPorts/mixPort"/>
+                    <xs:field xpath="@tagName|@name"/>
+                </xs:key>
+                <xs:keyref name="routeSinkRef" refer="routeSinkKey">
+                    <xs:selector xpath="routes/route"/>
+                    <xs:field xpath="@sink"/>
+                </xs:keyref>
+                <xs:unique name="routeUniqueness">
+                    <xs:selector xpath="routes/route"/>
+                    <xs:field xpath="@sink"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="attachedDevices">
+        <xs:sequence>
+            <xs:element name="item" type="xs:token" minOccurs="0" maxOccurs="unbounded"/>
+        </xs:sequence>
+    </xs:complexType>
+    <!-- TODO: separate values by space for better xsd validations. -->
+    <xs:simpleType name="audioInOutFlags">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                "|" separated list of audio_output_flags_t or audio_input_flags_t.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="|[_A-Z]+(\|[_A-Z]+)*"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="role">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="sink"/>
+            <xs:enumeration value="source"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="mixPorts">
+        <xs:sequence>
+            <xs:element name="mixPort" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="profile" type="profile" minOccurs="0" maxOccurs="unbounded"/>
+                        <xs:element name="gains" type="gains" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="name" type="xs:token" use="required"/>
+                    <xs:attribute name="role" type="role" use="required"/>
+                    <xs:attribute name="flags" type="audioInOutFlags"/>
+                    <xs:attribute name="maxOpenCount" type="xs:unsignedInt"/>
+                    <xs:attribute name="maxActiveCount" type="xs:unsignedInt"/>
+                    <xs:attribute name="preferredUsage" type="audioUsageList">
+                        <xs:annotation>
+                            <xs:documentation xml:lang="en">
+                                When choosing the mixPort of an audio track, the audioPolicy
+                                first considers the mixPorts with a preferredUsage including
+                                the track AudioUsage preferred .
+                                If non support the track format, the other mixPorts are considered.
+                                Eg: a <mixPort preferredUsage="AUDIO_USAGE_MEDIA" /> will receive
+                                    the audio of all apps playing with a MEDIA usage.
+                                    It may receive audio from ALARM if there are no audio compatible
+                                    <mixPort preferredUsage="AUDIO_USAGE_ALARM" />.
+                             </xs:documentation>
+                        </xs:annotation>
+                    </xs:attribute>
+                </xs:complexType>
+                <xs:unique name="mixPortProfileUniqueness">
+                    <xs:selector xpath="profile"/>
+                    <xs:field xpath="format"/>
+                    <xs:field xpath="samplingRate"/>
+                    <xs:field xpath="channelMasks"/>
+                </xs:unique>
+                <xs:unique name="mixPortGainUniqueness">
+                    <xs:selector xpath="gains/gain"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <!-- Enum values of audio_device_t in audio.h
+         TODO: generate from hidl to avoid manual sync.
+         TODO: separate source and sink in the xml for better xsd validations. -->
+    <xs:simpleType name="audioDevice">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_DEVICE_NONE"/>
+
+            <xs:enumeration value="AUDIO_DEVICE_OUT_EARPIECE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_WIRED_HEADPHONE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_DIGITAL"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_ACCESSORY"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_DEVICE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_TELEPHONY_TX"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HDMI_ARC"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPDIF"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_FM"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_AUX_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_SPEAKER_SAFE"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_IP"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_BUS"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_PROXY"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_USB_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_HEARING_AID"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_ECHO_CANCELLER"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_DEFAULT"/>
+            <xs:enumeration value="AUDIO_DEVICE_OUT_STUB"/>
+
+            <!-- Due to the xml format, IN types can not be a separated from OUT types -->
+            <xs:enumeration value="AUDIO_DEVICE_IN_COMMUNICATION"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_AMBIENT"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BUILTIN_MIC"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_WIRED_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_AUX_DIGITAL"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_HDMI"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_TELEPHONY_RX"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BACK_MIC"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_REMOTE_SUBMIX"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_ACCESSORY"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_DEVICE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_FM_TUNER"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_TV_TUNER"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_LINE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_SPDIF"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_A2DP"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_LOOPBACK"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_IP"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BUS"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_PROXY"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_USB_HEADSET"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_BLUETOOTH_BLE"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_DEFAULT"/>
+            <xs:enumeration value="AUDIO_DEVICE_IN_STUB"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="vendorExtension">
+        <!-- Vendor extension names must be prefixed by "VX_" to distinguish them from AOSP values.
+             Vendor are encouraged to namespace their module names to avoid conflicts.
+             Example for an hypothetical Google virtual reality device:
+                <devicePort tagName="VR" type="VX_GOOGLE_VR" role="sink">
+        -->
+        <xs:restriction base="xs:string">
+            <xs:pattern value="VX_[_a-zA-Z0-9]+"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="extendableAudioDevice">
+        <xs:union memberTypes="audioDevice vendorExtension"/>
+    </xs:simpleType>
+    <!-- Enum values of audio_format_t in audio.h
+         TODO: generate from hidl to avoid manual sync. -->
+    <xs:simpleType name="audioFormat">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_FORMAT_PCM_16_BIT" />
+            <xs:enumeration value="AUDIO_FORMAT_PCM_8_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_32_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_8_24_BIT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_FLOAT"/>
+            <xs:enumeration value="AUDIO_FORMAT_PCM_24_BIT_PACKED"/>
+            <xs:enumeration value="AUDIO_FORMAT_MP3"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_NB"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_WB"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_MAIN"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_SSR"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LTP"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_SCALABLE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ERLC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_LD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ELD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_MAIN"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SSR"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LTP"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_SCALABLE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ERLC"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_LD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_HE_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_ELD"/>
+            <xs:enumeration value="AUDIO_FORMAT_VORBIS"/>
+            <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V1"/>
+            <xs:enumeration value="AUDIO_FORMAT_HE_AAC_V2"/>
+            <xs:enumeration value="AUDIO_FORMAT_OPUS"/>
+            <xs:enumeration value="AUDIO_FORMAT_AC3"/>
+            <xs:enumeration value="AUDIO_FORMAT_E_AC3"/>
+            <xs:enumeration value="AUDIO_FORMAT_DTS"/>
+            <xs:enumeration value="AUDIO_FORMAT_DTS_HD"/>
+            <xs:enumeration value="AUDIO_FORMAT_IEC61937"/>
+            <xs:enumeration value="AUDIO_FORMAT_DOLBY_TRUEHD"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRC"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCB"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCWB"/>
+            <xs:enumeration value="AUDIO_FORMAT_EVRCNW"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADIF"/>
+            <xs:enumeration value="AUDIO_FORMAT_WMA"/>
+            <xs:enumeration value="AUDIO_FORMAT_WMA_PRO"/>
+            <xs:enumeration value="AUDIO_FORMAT_AMR_WB_PLUS"/>
+            <xs:enumeration value="AUDIO_FORMAT_MP2"/>
+            <xs:enumeration value="AUDIO_FORMAT_QCELP"/>
+            <xs:enumeration value="AUDIO_FORMAT_DSD"/>
+            <xs:enumeration value="AUDIO_FORMAT_FLAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_ALAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_APE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS"/>
+            <xs:enumeration value="AUDIO_FORMAT_SBC"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX"/>
+            <xs:enumeration value="AUDIO_FORMAT_APTX_HD"/>
+            <xs:enumeration value="AUDIO_FORMAT_AC4"/>
+            <xs:enumeration value="AUDIO_FORMAT_LDAC"/>
+            <xs:enumeration value="AUDIO_FORMAT_E_AC3_JOC"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_1_0"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_2_0"/>
+            <xs:enumeration value="AUDIO_FORMAT_MAT_2_1"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_XHE"/>
+            <xs:enumeration value="AUDIO_FORMAT_AAC_ADTS_XHE"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="extendableAudioFormat">
+        <xs:union memberTypes="audioFormat vendorExtension"/>
+    </xs:simpleType>
+    <!-- Enum values of audio::common::4_0::AudioUsage
+         TODO: generate from HIDL to avoid manual sync. -->
+    <xs:simpleType name="audioUsage">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_USAGE_UNKNOWN" />
+            <xs:enumeration value="AUDIO_USAGE_MEDIA" />
+            <xs:enumeration value="AUDIO_USAGE_VOICE_COMMUNICATION" />
+            <xs:enumeration value="AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING" />
+            <xs:enumeration value="AUDIO_USAGE_ALARM" />
+            <xs:enumeration value="AUDIO_USAGE_NOTIFICATION" />
+            <xs:enumeration value="AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANCE_SONIFICATION" />
+            <xs:enumeration value="AUDIO_USAGE_GAME" />
+            <xs:enumeration value="AUDIO_USAGE_VIRTUAL_SOURCE" />
+            <xs:enumeration value="AUDIO_USAGE_ASSISTANT" />
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:simpleType name="audioUsageList">
+        <xs:list itemType="audioUsage"/>
+    </xs:simpleType>
+    <!-- TODO: Change to a space separated list to xsd enforce correctness. -->
+    <xs:simpleType name="samplingRates">
+        <xs:restriction base="xs:string">
+            <xs:pattern value="[0-9]+(,[0-9]+)*"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- TODO: Change to a space separated list to xsd enforce correctness. -->
+    <xs:simpleType name="channelMask">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Comma (",") separated list of channel flags
+                from audio_channel_mask_t.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="[_A-Z][_A-Z0-9]*(,[_A-Z][_A-Z0-9]*)*"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="profile">
+        <xs:attribute name="name" type="xs:token" use="optional"/>
+        <xs:attribute name="format" type="extendableAudioFormat" use="optional"/>
+        <xs:attribute name="samplingRates" type="samplingRates" use="optional"/>
+        <xs:attribute name="channelMasks" type="channelMask" use="optional"/>
+    </xs:complexType>
+    <xs:simpleType name="gainMode">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_GAIN_MODE_JOINT"/>
+            <xs:enumeration value="AUDIO_GAIN_MODE_CHANNELS"/>
+            <xs:enumeration value="AUDIO_GAIN_MODE_RAMP"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="gains">
+        <xs:sequence>
+            <xs:element name="gain" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:attribute name="name" type="xs:token" use="required"/>
+                    <xs:attribute name="mode" type="gainMode" use="required"/>
+                    <xs:attribute name="channel_mask" type="channelMask" use="optional"/>
+                    <xs:attribute name="minValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="maxValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="defaultValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="stepValueMB" type="xs:int" use="optional"/>
+                    <xs:attribute name="minRampMs" type="xs:int" use="optional"/>
+                    <xs:attribute name="maxRampMs" type="xs:int" use="optional"/>
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="devicePorts">
+        <xs:sequence>
+            <xs:element name="devicePort" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:sequence>
+                        <xs:element name="profile" type="profile" minOccurs="0" maxOccurs="unbounded"/>
+                        <xs:element name="gains" type="gains" minOccurs="0"/>
+                    </xs:sequence>
+                    <xs:attribute name="tagName" type="xs:token" use="required"/>
+                    <xs:attribute name="type" type="extendableAudioDevice" use="required"/>
+                    <xs:attribute name="role" type="role" use="required"/>
+                    <xs:attribute name="address" type="xs:string" use="optional" default=""/>
+                    <!-- Note that XSD 1.0 can not check that a type only has one default. -->
+                    <xs:attribute name="default" type="xs:boolean" use="optional">
+                        <xs:annotation>
+                            <xs:documentation xml:lang="en">
+                                The default device will be used if multiple have the same type
+                                and no explicit route request exists for a specific device of
+                                that type.
+                            </xs:documentation>
+                        </xs:annotation>
+                    </xs:attribute>
+                </xs:complexType>
+                <xs:unique name="devicePortProfileUniqueness">
+                    <xs:selector xpath="profile"/>
+                    <xs:field xpath="format"/>
+                    <xs:field xpath="samplingRate"/>
+                    <xs:field xpath="channelMasks"/>
+                </xs:unique>
+                <xs:unique name="devicePortGainUniqueness">
+                    <xs:selector xpath="gains/gain"/>
+                    <xs:field xpath="@name"/>
+                </xs:unique>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="mixType">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="mix"/>
+            <xs:enumeration value="mux"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="routes">
+        <xs:sequence>
+            <xs:element name="route" minOccurs="0" maxOccurs="unbounded">
+                <xs:annotation>
+                    <xs:documentation xml:lang="en">
+                        List all available sources for a given sink.
+                    </xs:documentation>
+                </xs:annotation>
+                <xs:complexType>
+                    <xs:attribute name="type" type="mixType" use="required"/>
+                    <xs:attribute name="sink" type="xs:string" use="required"/>
+                    <xs:attribute name="sources" type="xs:string" use="required"/>
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:complexType name="volumes">
+        <xs:sequence>
+            <xs:element name="volume" type="volume" minOccurs="0" maxOccurs="unbounded"/>
+            <xs:element name="reference" type="reference" minOccurs="0" maxOccurs="unbounded">
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+    <!-- TODO: Always require a ref for better xsd validations.
+               Currently a volume could have no points nor ref
+               as it can not be forbidden by xsd 1.0.-->
+    <xs:simpleType name="volumePoint">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Comma separated pair of number.
+                The fist one is the framework level (between 0 and 100).
+                The second one is the volume to send to the HAL.
+                The framework will interpolate volumes not specified.
+                Their MUST be at least 2 points specified.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:restriction base="xs:string">
+            <xs:pattern value="([0-9]{1,2}|100),-?[0-9]+"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of audio_stream_type_t in audio-base.h
+         TODO: generate from hidl to avoid manual sync. -->
+    <xs:simpleType name="stream">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="AUDIO_STREAM_VOICE_CALL"/>
+            <xs:enumeration value="AUDIO_STREAM_SYSTEM"/>
+            <xs:enumeration value="AUDIO_STREAM_RING"/>
+            <xs:enumeration value="AUDIO_STREAM_MUSIC"/>
+            <xs:enumeration value="AUDIO_STREAM_ALARM"/>
+            <xs:enumeration value="AUDIO_STREAM_NOTIFICATION"/>
+            <xs:enumeration value="AUDIO_STREAM_BLUETOOTH_SCO"/>
+            <xs:enumeration value="AUDIO_STREAM_ENFORCED_AUDIBLE"/>
+            <xs:enumeration value="AUDIO_STREAM_DTMF"/>
+            <xs:enumeration value="AUDIO_STREAM_TTS"/>
+            <xs:enumeration value="AUDIO_STREAM_ACCESSIBILITY"/>
+            <xs:enumeration value="AUDIO_STREAM_REROUTING"/>
+            <xs:enumeration value="AUDIO_STREAM_PATCH"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <!-- Enum values of device_category from Volume.h.
+         TODO: generate from hidl to avoid manual sync. -->
+    <xs:simpleType name="deviceCategory">
+        <xs:restriction base="xs:string">
+            <xs:enumeration value="DEVICE_CATEGORY_HEADSET"/>
+            <xs:enumeration value="DEVICE_CATEGORY_SPEAKER"/>
+            <xs:enumeration value="DEVICE_CATEGORY_EARPIECE"/>
+            <xs:enumeration value="DEVICE_CATEGORY_EXT_MEDIA"/>
+            <xs:enumeration value="DEVICE_CATEGORY_HEARING_AID"/>
+        </xs:restriction>
+    </xs:simpleType>
+    <xs:complexType name="volume">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Volume section defines a volume curve for a given use case and device category.
+                It contains a list of points of this curve expressing the attenuation in Millibels
+                for a given volume index from 0 to 100.
+                <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_SPEAKER">
+                    <point>0,-9600</point>
+                    <point>100,0</point>
+                </volume>
+
+                It may also reference a reference/@name to avoid duplicating curves.
+                <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_SPEAKER"
+                        ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
+                <reference name="DEFAULT_MEDIA_VOLUME_CURVE">
+                    <point>0,-9600</point>
+                    <point>100,0</point>
+                </reference>
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="point" type="volumePoint" minOccurs="0" maxOccurs="unbounded"/>
+        </xs:sequence>
+        <xs:attribute name="stream" type="stream"/>
+        <xs:attribute name="deviceCategory" type="deviceCategory"/>
+        <xs:attribute name="ref" type="xs:token" use="optional"/>
+    </xs:complexType>
+    <xs:complexType name="reference">
+        <xs:sequence>
+            <xs:element name="point" type="volumePoint" minOccurs="2" maxOccurs="unbounded"/>
+        </xs:sequence>
+        <xs:attribute name="name" type="xs:token" use="required"/>
+    </xs:complexType>
+    <xs:complexType name="surroundSound">
+        <xs:annotation>
+            <xs:documentation xml:lang="en">
+                Surround Sound section provides configuration related to handling of
+                multi-channel formats.
+            </xs:documentation>
+        </xs:annotation>
+        <xs:sequence>
+            <xs:element name="formats" type="surroundFormats"/>
+        </xs:sequence>
+    </xs:complexType>
+    <xs:simpleType name="surroundFormatsList">
+        <xs:list itemType="audioFormat" />
+    </xs:simpleType>
+    <xs:complexType name="surroundFormats">
+        <xs:sequence>
+            <xs:element name="format" minOccurs="0" maxOccurs="unbounded">
+                <xs:complexType>
+                    <xs:attribute name="name" type="audioFormat" use="required"/>
+                    <xs:attribute name="subformats" type="surroundFormatsList" />
+                </xs:complexType>
+            </xs:element>
+        </xs:sequence>
+    </xs:complexType>
+</xs:schema>
diff --git a/audio/5.0/types.hal b/audio/5.0/types.hal
new file mode 100644
index 0000000..988f584
--- /dev/null
+++ b/audio/5.0/types.hal
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@5.0;
+
+import android.hardware.audio.common@5.0;
+
+enum Result : int32_t {
+    OK,
+    NOT_INITIALIZED,
+    INVALID_ARGUMENTS,
+    INVALID_STATE,
+    /**
+     * Methods marked as "Optional method" must return this result value
+     * if the operation is not supported by HAL.
+     */
+    NOT_SUPPORTED
+};
+
+@export(name="audio_drain_type_t", value_prefix="AUDIO_DRAIN_")
+enum AudioDrain : int32_t {
+    /** drain() returns when all data has been played. */
+    ALL,
+    /**
+     * drain() returns a short time before all data from the current track has
+     * been played to give time for gapless track switch.
+     */
+    EARLY_NOTIFY
+};
+
+/**
+ * A substitute for POSIX timespec.
+ */
+struct TimeSpec {
+    uint64_t tvSec;   // seconds
+    uint64_t tvNSec;  // nanoseconds
+};
+
+/**
+ * IEEE 802 MAC address.
+ */
+typedef uint8_t[6] MacAddress;
+
+struct ParameterValue {
+    string key;
+    string value;
+};
+
+/**
+ * Specifies a device in case when several devices of the same type
+ * can be connected (e.g. BT A2DP, USB).
+ */
+struct DeviceAddress {
+    AudioDevice device;  // discriminator
+    union Address {
+        MacAddress mac;     // used for BLUETOOTH_A2DP_*
+        uint8_t[4] ipv4;    // used for IP
+        struct Alsa {
+            int32_t card;
+            int32_t device;
+        } alsa;             // used for USB_*
+    } address;
+    string busAddress;      // used for BUS
+    string rSubmixAddress;  // used for REMOTE_SUBMIX
+};
+
+enum MmapBufferFlag : uint32_t {
+    NONE    = 0x0,
+    /**
+     * If the buffer can be securely shared to untrusted applications
+     * through the AAudio exclusive mode.
+     * Only set this flag if applications are restricted from accessing the
+     * memory surrounding the audio data buffer by a kernel mechanism.
+     * See Linux kernel's dma_buf.
+     */
+    APPLICATION_SHAREABLE    = 0x1,
+};
+
+/**
+ * Mmap buffer descriptor returned by IStream.createMmapBuffer().
+ * Used by streams opened in mmap mode.
+ */
+struct MmapBufferInfo {
+    /** Mmap memory buffer */
+    memory  sharedMemory;
+    /** Total buffer size in frames */
+    uint32_t bufferSizeFrames;
+    /** Transfer size granularity in frames */
+    uint32_t burstSizeFrames;
+    /** Attributes describing the buffer. */
+    bitfield<MmapBufferFlag> flags;
+};
+
+/**
+ * Mmap buffer read/write position returned by IStream.getMmapPosition().
+ * Used by streams opened in mmap mode.
+ */
+struct MmapPosition {
+    int64_t  timeNanoseconds; // time stamp in ns, CLOCK_MONOTONIC
+    int32_t  positionFrames;  // increasing 32 bit frame count reset when IStream.stop() is called
+};
+
+/**
+ * The message queue flags used to synchronize reads and writes from
+ * message queues used by StreamIn and StreamOut.
+ */
+enum MessageQueueFlagBits : uint32_t {
+    NOT_EMPTY = 1 << 0,
+    NOT_FULL = 1 << 1
+};
+
+/*
+ * Microphone information
+ *
+ */
+
+/**
+ * A 3D point used to represent position or orientation of a microphone.
+ *
+ * Position: Coordinates of the microphone's capsule, in meters, from the
+ * bottom-left-back corner of the bounding box of android device in natural
+ * orientation (PORTRAIT for phones, LANDSCAPE for tablets, tvs, etc).
+ * The orientation musth match the reported by the api Display.getRotation().
+ *
+ * Orientation: Normalized vector to signal the main orientation of the
+ * microphone's capsule. Magnitude = sqrt(x^2 + y^2 + z^2) = 1
+ */
+struct AudioMicrophoneCoordinate {
+    float x;
+    float y;
+    float z;
+};
+
+/**
+ * Enum to identify the type of channel mapping for active microphones.
+ * Used channels further identify if the microphone has any significative
+ * process (e.g. High Pass Filtering, dynamic compression)
+ * Simple processing as constant gain adjustment must be DIRECT.
+ */
+enum AudioMicrophoneChannelMapping : uint32_t {
+    UNUSED      = 0, /* Channel not used */
+    DIRECT      = 1, /* Channel used and signal not processed */
+    PROCESSED   = 2, /* Channel used and signal has some process */
+};
+
+/**
+ * Enum to identify locations of microphones in regards to the body of the
+ * android device.
+ */
+enum AudioMicrophoneLocation : uint32_t {
+    UNKNOWN             = 0,
+    MAINBODY            = 1,
+    MAINBODY_MOVABLE    = 2,
+    PERIPHERAL          = 3,
+};
+
+/**
+ * Identifier to help group related microphones together
+ * e.g. microphone arrays should belong to the same group
+ */
+typedef int32_t AudioMicrophoneGroup;
+
+/**
+ * Enum with standard polar patterns of microphones
+ */
+enum AudioMicrophoneDirectionality : uint32_t {
+    UNKNOWN         = 0,
+    OMNI            = 1,
+    BI_DIRECTIONAL  = 2,
+    CARDIOID        = 3,
+    HYPER_CARDIOID  = 4,
+    SUPER_CARDIOID  = 5,
+};
+
+/**
+ * A (frequency, level) pair. Used to represent frequency response.
+ */
+struct AudioFrequencyResponsePoint {
+    /** In Hz */
+    float frequency;
+    /** In dB */
+    float level;
+};
+
+/**
+ * Structure used by the HAL to describe microphone's characteristics
+ * Used by StreamIn and Device
+ */
+struct MicrophoneInfo {
+    /** Unique alphanumeric id for microphone. Guaranteed to be the same
+     * even after rebooting.
+     */
+    string                                  deviceId;
+    /**
+     * Device specific information
+     */
+    DeviceAddress                           deviceAddress;
+    /** Each element of the vector must describe the channel with the same
+     *  index.
+     */
+    vec<AudioMicrophoneChannelMapping>      channelMapping;
+    /** Location of the microphone in regard to the body of the device */
+    AudioMicrophoneLocation                 location;
+    /** Identifier to help group related microphones together
+     *  e.g. microphone arrays should belong to the same group
+     */
+    AudioMicrophoneGroup                    group;
+    /** Index of this microphone within the group.
+     *  (group, index) must be unique within the same device.
+     */
+    uint32_t                                indexInTheGroup;
+    /** Level in dBFS produced by a 1000 Hz tone at 94 dB SPL */
+    float                                   sensitivity;
+    /** Level in dB of the max SPL supported at 1000 Hz */
+    float                                   maxSpl;
+    /** Level in dB of the min SPL supported at 1000 Hz */
+    float                                   minSpl;
+    /** Standard polar pattern of the microphone */
+    AudioMicrophoneDirectionality           directionality;
+    /** Vector with ordered frequency responses (from low to high frequencies)
+     *  with the frequency response of the microphone.
+     *  Levels are in dB, relative to level at 1000 Hz
+     */
+    vec<AudioFrequencyResponsePoint>        frequencyResponse;
+    /** Position of the microphone's capsule in meters, from the
+     *  bottom-left-back corner of the bounding box of device.
+     */
+    AudioMicrophoneCoordinate               position;
+    /** Normalized point to signal the main orientation of the microphone's
+     *  capsule. sqrt(x^2 + y^2 + z^2) = 1
+     */
+    AudioMicrophoneCoordinate               orientation;
+};
diff --git a/audio/common/5.0/Android.bp b/audio/common/5.0/Android.bp
new file mode 100644
index 0000000..663f847
--- /dev/null
+++ b/audio/common/5.0/Android.bp
@@ -0,0 +1,48 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.audio.common@5.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+    ],
+    types: [
+        "AudioChannelMask",
+        "AudioConfig",
+        "AudioContentType",
+        "AudioDevice",
+        "AudioFormat",
+        "AudioGain",
+        "AudioGainConfig",
+        "AudioGainMode",
+        "AudioHandleConsts",
+        "AudioInputFlag",
+        "AudioMixLatencyClass",
+        "AudioMode",
+        "AudioOffloadInfo",
+        "AudioOutputFlag",
+        "AudioPort",
+        "AudioPortConfig",
+        "AudioPortConfigDeviceExt",
+        "AudioPortConfigMask",
+        "AudioPortConfigSessionExt",
+        "AudioPortDeviceExt",
+        "AudioPortMixExt",
+        "AudioPortRole",
+        "AudioPortSessionExt",
+        "AudioPortType",
+        "AudioSessionConsts",
+        "AudioSource",
+        "AudioStreamType",
+        "AudioUsage",
+        "FixedChannelCount",
+        "ThreadInfo",
+        "Uuid",
+    ],
+    gen_java: false,
+    gen_java_constants: true,
+}
+
diff --git a/audio/common/5.0/types.hal b/audio/common/5.0/types.hal
new file mode 100644
index 0000000..2ce2929
--- /dev/null
+++ b/audio/common/5.0/types.hal
@@ -0,0 +1,936 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.common@5.0;
+
+/*
+ *
+ *  IDs and Handles
+ *
+ */
+
+/**
+ * Handle type for identifying audio sources and sinks.
+ */
+typedef int32_t AudioIoHandle;
+
+/**
+ * Audio hw module handle functions or structures referencing a module.
+ */
+typedef int32_t AudioModuleHandle;
+
+/**
+ * Each port has a unique ID or handle allocated by policy manager.
+ */
+typedef int32_t AudioPortHandle;
+
+/**
+ * Each patch is identified by a handle at the interface used to create that
+ * patch. For instance, when a patch is created by the audio HAL, the HAL
+ * allocates and returns a handle.  This handle is unique to a given audio HAL
+ * hardware module.  But the same patch receives another system wide unique
+ * handle allocated by the framework.  This unique handle is used for all
+ * transactions inside the framework.
+ */
+typedef int32_t AudioPatchHandle;
+
+/**
+ * A HW synchronization source returned by the audio HAL.
+ */
+typedef uint32_t AudioHwSync;
+
+/**
+ * Each port has a unique ID or handle allocated by policy manager.
+ */
+@export(name="")
+enum AudioHandleConsts : int32_t {
+    AUDIO_IO_HANDLE_NONE = 0,
+    AUDIO_MODULE_HANDLE_NONE = 0,
+    AUDIO_PORT_HANDLE_NONE = 0,
+    AUDIO_PATCH_HANDLE_NONE = 0,
+};
+
+/**
+ * Commonly used structure for passing unique identifieds (UUID).
+ * For the definition of UUID, refer to ITU-T X.667 spec.
+ */
+struct Uuid {
+    uint32_t timeLow;
+    uint16_t timeMid;
+    uint16_t versionAndTimeHigh;
+    uint16_t variantAndClockSeqHigh;
+    uint8_t[6] node;
+};
+
+
+/*
+ *
+ *  Audio streams
+ *
+ */
+
+/**
+ * Audio stream type describing the intended use case of a stream.
+ */
+@export(name="audio_stream_type_t", value_prefix="AUDIO_STREAM_")
+enum AudioStreamType : int32_t {
+    // These values must kept in sync with
+    //  frameworks/base/media/java/android/media/AudioSystem.java
+    DEFAULT          = -1,
+    MIN              = 0,
+    VOICE_CALL       = 0,
+    SYSTEM           = 1,
+    RING             = 2,
+    MUSIC            = 3,
+    ALARM            = 4,
+    NOTIFICATION     = 5,
+    BLUETOOTH_SCO    = 6,
+    ENFORCED_AUDIBLE = 7,  // Sounds that cannot be muted by user and must be
+                           // routed to speaker
+    DTMF             = 8,
+    TTS              = 9,  // Transmitted Through Speaker.  Plays over speaker
+                           // only, silent on other devices
+    ACCESSIBILITY    = 10, // For accessibility talk back prompts
+};
+
+@export(name="audio_source_t", value_prefix="AUDIO_SOURCE_")
+enum AudioSource : int32_t {
+    // These values must kept in sync with
+    //  frameworks/base/media/java/android/media/MediaRecorder.java,
+    //  frameworks/av/services/audiopolicy/AudioPolicyService.cpp,
+    //  system/media/audio_effects/include/audio_effects/audio_effects_conf.h
+    DEFAULT             = 0,
+    MIC                 = 1,
+    VOICE_UPLINK        = 2,
+    VOICE_DOWNLINK      = 3,
+    VOICE_CALL          = 4,
+    CAMCORDER           = 5,
+    VOICE_RECOGNITION   = 6,
+    VOICE_COMMUNICATION = 7,
+    /**
+     * Source for the mix to be presented remotely. An example of remote
+     * presentation is Wifi Display where a dongle attached to a TV can be used
+     * to play the mix captured by this audio source.
+     */
+    REMOTE_SUBMIX       = 8,
+    /**
+     * Source for unprocessed sound. Usage examples include level measurement
+     * and raw signal analysis.
+     */
+    UNPROCESSED         = 9,
+
+    FM_TUNER            = 1998,
+};
+
+typedef int32_t AudioSession;
+/**
+ * Special audio session values.
+ */
+@export(name="audio_session_t", value_prefix="AUDIO_SESSION_")
+enum AudioSessionConsts : int32_t {
+    /**
+     * Session for effects attached to a particular output stream
+     * (value must be less than 0)
+     */
+    OUTPUT_STAGE = -1,
+    /**
+     * Session for effects applied to output mix. These effects can
+     * be moved by audio policy manager to another output stream
+     * (value must be 0)
+     */
+    OUTPUT_MIX = 0,
+    /**
+     * Application does not specify an explicit session ID to be used, and
+     * requests a new session ID to be allocated. Corresponds to
+     * AudioManager.AUDIO_SESSION_ID_GENERATE and
+     * AudioSystem.AUDIO_SESSION_ALLOCATE.
+     */
+    ALLOCATE = 0,
+    /**
+     * For use with AudioRecord::start(), this indicates no trigger session.
+     * It is also used with output tracks and patch tracks, which never have a
+     * session.
+     */
+    NONE = 0
+};
+
+/**
+ * Audio format  is a 32-bit word that consists of:
+ *   main format field (upper 8 bits)
+ *   sub format field (lower 24 bits).
+ *
+ * The main format indicates the main codec type. The sub format field indicates
+ * options and parameters for each format. The sub format is mainly used for
+ * record to indicate for instance the requested bitrate or profile.  It can
+ * also be used for certain formats to give informations not present in the
+ * encoded audio stream (e.g. octet alignement for AMR).
+ */
+@export(name="audio_format_t", value_prefix="AUDIO_FORMAT_")
+enum AudioFormat : uint32_t {
+    INVALID             = 0xFFFFFFFFUL,
+    DEFAULT             = 0,
+    PCM                 = 0x00000000UL,
+    MP3                 = 0x01000000UL,
+    AMR_NB              = 0x02000000UL,
+    AMR_WB              = 0x03000000UL,
+    AAC                 = 0x04000000UL,
+    /** Deprecated, Use AAC_HE_V1 */
+    HE_AAC_V1           = 0x05000000UL,
+    /** Deprecated, Use AAC_HE_V2 */
+    HE_AAC_V2           = 0x06000000UL,
+    VORBIS              = 0x07000000UL,
+    OPUS                = 0x08000000UL,
+    AC3                 = 0x09000000UL,
+    E_AC3               = 0x0A000000UL,
+    DTS                 = 0x0B000000UL,
+    DTS_HD              = 0x0C000000UL,
+    /** IEC61937 is encoded audio wrapped in 16-bit PCM. */
+    IEC61937            = 0x0D000000UL,
+    DOLBY_TRUEHD        = 0x0E000000UL,
+    EVRC                = 0x10000000UL,
+    EVRCB               = 0x11000000UL,
+    EVRCWB              = 0x12000000UL,
+    EVRCNW              = 0x13000000UL,
+    AAC_ADIF            = 0x14000000UL,
+    WMA                 = 0x15000000UL,
+    WMA_PRO             = 0x16000000UL,
+    AMR_WB_PLUS         = 0x17000000UL,
+    MP2                 = 0x18000000UL,
+    QCELP               = 0x19000000UL,
+    DSD                 = 0x1A000000UL,
+    FLAC                = 0x1B000000UL,
+    ALAC                = 0x1C000000UL,
+    APE                 = 0x1D000000UL,
+    AAC_ADTS            = 0x1E000000UL,
+    SBC                 = 0x1F000000UL,
+    APTX                = 0x20000000UL,
+    APTX_HD             = 0x21000000UL,
+    AC4                 = 0x22000000UL,
+    LDAC                = 0x23000000UL,
+    /** Dolby Metadata-enhanced Audio Transmission */
+    MAT                 = 0x24000000UL,
+    /** Deprecated */
+    MAIN_MASK           = 0xFF000000UL,
+    SUB_MASK            = 0x00FFFFFFUL,
+
+    /* Subformats */
+    PCM_SUB_16_BIT        = 0x1, // PCM signed 16 bits
+    PCM_SUB_8_BIT         = 0x2, // PCM unsigned 8 bits
+    PCM_SUB_32_BIT        = 0x3, // PCM signed .31 fixed point
+    PCM_SUB_8_24_BIT      = 0x4, // PCM signed 8.23 fixed point
+    PCM_SUB_FLOAT         = 0x5, // PCM single-precision float pt
+    PCM_SUB_24_BIT_PACKED = 0x6, // PCM signed .23 fix pt (3 bytes)
+
+    MP3_SUB_NONE          = 0x0,
+
+    AMR_SUB_NONE          = 0x0,
+
+    AAC_SUB_MAIN          = 0x1,
+    AAC_SUB_LC            = 0x2,
+    AAC_SUB_SSR           = 0x4,
+    AAC_SUB_LTP           = 0x8,
+    AAC_SUB_HE_V1         = 0x10,
+    AAC_SUB_SCALABLE      = 0x20,
+    AAC_SUB_ERLC          = 0x40,
+    AAC_SUB_LD            = 0x80,
+    AAC_SUB_HE_V2         = 0x100,
+    AAC_SUB_ELD           = 0x200,
+    AAC_SUB_XHE           = 0x300,
+
+    VORBIS_SUB_NONE       = 0x0,
+
+    E_AC3_SUB_JOC         = 0x1,
+
+    MAT_SUB_1_0           = 0x1,
+    MAT_SUB_2_0           = 0x2,
+    MAT_SUB_2_1           = 0x3,
+
+    /* Aliases */
+    /** note != AudioFormat.ENCODING_PCM_16BIT */
+    PCM_16_BIT          = (PCM | PCM_SUB_16_BIT),
+    /** note != AudioFormat.ENCODING_PCM_8BIT */
+    PCM_8_BIT           = (PCM | PCM_SUB_8_BIT),
+    PCM_32_BIT          = (PCM | PCM_SUB_32_BIT),
+    PCM_8_24_BIT        = (PCM | PCM_SUB_8_24_BIT),
+    PCM_FLOAT           = (PCM | PCM_SUB_FLOAT),
+    PCM_24_BIT_PACKED   = (PCM | PCM_SUB_24_BIT_PACKED),
+    AAC_MAIN            = (AAC | AAC_SUB_MAIN),
+    AAC_LC              = (AAC | AAC_SUB_LC),
+    AAC_SSR             = (AAC | AAC_SUB_SSR),
+    AAC_LTP             = (AAC | AAC_SUB_LTP),
+    AAC_HE_V1           = (AAC | AAC_SUB_HE_V1),
+    AAC_SCALABLE        = (AAC | AAC_SUB_SCALABLE),
+    AAC_ERLC            = (AAC | AAC_SUB_ERLC),
+    AAC_LD              = (AAC | AAC_SUB_LD),
+    AAC_HE_V2           = (AAC | AAC_SUB_HE_V2),
+    AAC_ELD             = (AAC | AAC_SUB_ELD),
+    AAC_XHE             = (AAC | AAC_SUB_XHE),
+    AAC_ADTS_MAIN       = (AAC_ADTS | AAC_SUB_MAIN),
+    AAC_ADTS_LC         = (AAC_ADTS | AAC_SUB_LC),
+    AAC_ADTS_SSR        = (AAC_ADTS | AAC_SUB_SSR),
+    AAC_ADTS_LTP        = (AAC_ADTS | AAC_SUB_LTP),
+    AAC_ADTS_HE_V1      = (AAC_ADTS | AAC_SUB_HE_V1),
+    AAC_ADTS_SCALABLE   = (AAC_ADTS | AAC_SUB_SCALABLE),
+    AAC_ADTS_ERLC       = (AAC_ADTS | AAC_SUB_ERLC),
+    AAC_ADTS_LD         = (AAC_ADTS | AAC_SUB_LD),
+    AAC_ADTS_HE_V2      = (AAC_ADTS | AAC_SUB_HE_V2),
+    AAC_ADTS_ELD        = (AAC_ADTS | AAC_SUB_ELD),
+    AAC_ADTS_XHE        = (AAC_ADTS | AAC_SUB_XHE),
+    E_AC3_JOC           = (E_AC3 | E_AC3_SUB_JOC),
+    MAT_1_0             = (MAT | MAT_SUB_1_0),
+    MAT_2_0             = (MAT | MAT_SUB_2_0),
+    MAT_2_1             = (MAT | MAT_SUB_2_1),
+};
+
+/**
+ * Usage of these values highlights places in the code that use 2- or 8- channel
+ * assumptions.
+ */
+@export(name="")
+enum FixedChannelCount : int32_t {
+    FCC_2 = 2, // This is typically due to legacy implementation of stereo I/O
+    FCC_8 = 8  // This is typically due to audio mixer and resampler limitations
+};
+
+/**
+ * A channel mask per se only defines the presence or absence of a channel, not
+ * the order.  See AUDIO_INTERLEAVE_* for the platform convention of order.
+ *
+ * AudioChannelMask is an opaque type and its internal layout should not be
+ * assumed as it may change in the future.  Instead, always use functions
+ * to examine it.
+ *
+ * These are the current representations:
+ *
+ *   REPRESENTATION_POSITION
+ *     is a channel mask representation for position assignment.  Each low-order
+ *     bit corresponds to the spatial position of a transducer (output), or
+ *     interpretation of channel (input).  The user of a channel mask needs to
+ *     know the context of whether it is for output or input.  The constants
+ *     OUT_* or IN_* apply to the bits portion.  It is not permitted for no bits
+ *     to be set.
+ *
+ *   REPRESENTATION_INDEX
+ *     is a channel mask representation for index assignment.  Each low-order
+ *     bit corresponds to a selected channel.  There is no platform
+ *     interpretation of the various bits.  There is no concept of output or
+ *     input.  It is not permitted for no bits to be set.
+ *
+ * All other representations are reserved for future use.
+ *
+ * Warning: current representation distinguishes between input and output, but
+ * this will not the be case in future revisions of the platform. Wherever there
+ * is an ambiguity between input and output that is currently resolved by
+ * checking the channel mask, the implementer should look for ways to fix it
+ * with additional information outside of the mask.
+ */
+@export(name="", value_prefix="AUDIO_CHANNEL_")
+enum AudioChannelMask : uint32_t {
+    /** must be 0 for compatibility */
+    REPRESENTATION_POSITION = 0,
+    /** 1 is reserved for future use */
+    REPRESENTATION_INDEX    = 2,
+    /* 3 is reserved for future use */
+
+    /** These can be a complete value of AudioChannelMask */
+    NONE                      = 0x0,
+    INVALID                   = 0xC0000000,
+
+   /*
+    * These can be the bits portion of an AudioChannelMask
+    * with representation REPRESENTATION_POSITION.
+    */
+
+    /** output channels */
+    OUT_FRONT_LEFT            = 0x1,
+    OUT_FRONT_RIGHT           = 0x2,
+    OUT_FRONT_CENTER          = 0x4,
+    OUT_LOW_FREQUENCY         = 0x8,
+    OUT_BACK_LEFT             = 0x10,
+    OUT_BACK_RIGHT            = 0x20,
+    OUT_FRONT_LEFT_OF_CENTER  = 0x40,
+    OUT_FRONT_RIGHT_OF_CENTER = 0x80,
+    OUT_BACK_CENTER           = 0x100,
+    OUT_SIDE_LEFT             = 0x200,
+    OUT_SIDE_RIGHT            = 0x400,
+    OUT_TOP_CENTER            = 0x800,
+    OUT_TOP_FRONT_LEFT        = 0x1000,
+    OUT_TOP_FRONT_CENTER      = 0x2000,
+    OUT_TOP_FRONT_RIGHT       = 0x4000,
+    OUT_TOP_BACK_LEFT         = 0x8000,
+    OUT_TOP_BACK_CENTER       = 0x10000,
+    OUT_TOP_BACK_RIGHT        = 0x20000,
+    OUT_TOP_SIDE_LEFT         = 0x40000,
+    OUT_TOP_SIDE_RIGHT        = 0x80000,
+
+    OUT_MONO     = OUT_FRONT_LEFT,
+    OUT_STEREO   = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT),
+    OUT_2POINT1  = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT | OUT_LOW_FREQUENCY),
+    OUT_2POINT0POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+                         OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
+    OUT_2POINT1POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+                         OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT |
+                         OUT_LOW_FREQUENCY),
+    OUT_3POINT0POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_CENTER | OUT_FRONT_RIGHT |
+                         OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
+    OUT_3POINT1POINT2 = (OUT_FRONT_LEFT | OUT_FRONT_CENTER | OUT_FRONT_RIGHT |
+                        OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT |
+                        OUT_LOW_FREQUENCY),
+    OUT_QUAD     = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT),
+    OUT_QUAD_BACK = OUT_QUAD,
+    /** like OUT_QUAD_BACK with *_SIDE_* instead of *_BACK_* */
+    OUT_QUAD_SIDE = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
+    OUT_SURROUND = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_BACK_CENTER),
+    OUT_PENTA = (OUT_QUAD | OUT_FRONT_CENTER),
+    OUT_5POINT1   = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT),
+    OUT_5POINT1_BACK = OUT_5POINT1,
+    /** like OUT_5POINT1_BACK with *_SIDE_* instead of *_BACK_* */
+    OUT_5POINT1_SIDE = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
+    OUT_5POINT1POINT2  = (OUT_5POINT1 | OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
+    OUT_5POINT1POINT4  = (OUT_5POINT1 |
+            OUT_TOP_FRONT_LEFT | OUT_TOP_FRONT_RIGHT |
+            OUT_TOP_BACK_LEFT | OUT_TOP_BACK_RIGHT),
+    OUT_6POINT1 = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT |
+            OUT_BACK_CENTER),
+    /** matches the correct AudioFormat.CHANNEL_OUT_7POINT1_SURROUND */
+    OUT_7POINT1  = (OUT_FRONT_LEFT | OUT_FRONT_RIGHT |
+            OUT_FRONT_CENTER | OUT_LOW_FREQUENCY |
+            OUT_BACK_LEFT | OUT_BACK_RIGHT |
+            OUT_SIDE_LEFT | OUT_SIDE_RIGHT),
+    OUT_7POINT1POINT2  = (OUT_7POINT1 | OUT_TOP_SIDE_LEFT | OUT_TOP_SIDE_RIGHT),
+    OUT_7POINT1POINT4  = (OUT_7POINT1 |
+            OUT_TOP_FRONT_LEFT | OUT_TOP_FRONT_RIGHT |
+            OUT_TOP_BACK_LEFT | OUT_TOP_BACK_RIGHT),
+    // Note that the 2.0 OUT_ALL* have been moved to helper functions
+
+    /* These are bits only, not complete values */
+
+    /** input channels */
+    IN_LEFT            = 0x4,
+    IN_RIGHT           = 0x8,
+    IN_FRONT           = 0x10,
+    IN_BACK            = 0x20,
+    IN_LEFT_PROCESSED  = 0x40,
+    IN_RIGHT_PROCESSED = 0x80,
+    IN_FRONT_PROCESSED = 0x100,
+    IN_BACK_PROCESSED  = 0x200,
+    IN_PRESSURE        = 0x400,
+    IN_X_AXIS          = 0x800,
+    IN_Y_AXIS          = 0x1000,
+    IN_Z_AXIS          = 0x2000,
+    IN_BACK_LEFT       = 0x10000,
+    IN_BACK_RIGHT      = 0x20000,
+    IN_CENTER          = 0x40000,
+    IN_LOW_FREQUENCY   = 0x100000,
+    IN_TOP_LEFT        = 0x200000,
+    IN_TOP_RIGHT       = 0x400000,
+
+    IN_VOICE_UPLINK    = 0x4000,
+    IN_VOICE_DNLINK    = 0x8000,
+
+    IN_MONO   = IN_FRONT,
+    IN_STEREO = (IN_LEFT | IN_RIGHT),
+    IN_FRONT_BACK = (IN_FRONT | IN_BACK),
+    IN_6 = (IN_LEFT | IN_RIGHT |
+            IN_FRONT | IN_BACK |
+            IN_LEFT_PROCESSED | IN_RIGHT_PROCESSED),
+    IN_2POINT0POINT2 = (IN_LEFT | IN_RIGHT | IN_TOP_LEFT | IN_TOP_RIGHT),
+    IN_2POINT1POINT2 = (IN_LEFT | IN_RIGHT | IN_TOP_LEFT | IN_TOP_RIGHT |
+            IN_LOW_FREQUENCY),
+    IN_3POINT0POINT2 = (IN_LEFT | IN_CENTER | IN_RIGHT | IN_TOP_LEFT | IN_TOP_RIGHT),
+    IN_3POINT1POINT2 = (IN_LEFT | IN_CENTER | IN_RIGHT |
+            IN_TOP_LEFT | IN_TOP_RIGHT | IN_LOW_FREQUENCY),
+    IN_5POINT1 = (IN_LEFT | IN_CENTER | IN_RIGHT |
+                  IN_BACK_LEFT | IN_BACK_RIGHT | IN_LOW_FREQUENCY),
+    IN_VOICE_UPLINK_MONO = (IN_VOICE_UPLINK | IN_MONO),
+    IN_VOICE_DNLINK_MONO = (IN_VOICE_DNLINK | IN_MONO),
+    IN_VOICE_CALL_MONO   = (IN_VOICE_UPLINK_MONO |
+            IN_VOICE_DNLINK_MONO),
+    // Note that the 2.0 IN_ALL* have been moved to helper functions
+
+    COUNT_MAX    = 30,
+    INDEX_HDR    = REPRESENTATION_INDEX << COUNT_MAX,
+    INDEX_MASK_1 = INDEX_HDR | ((1 << 1) - 1),
+    INDEX_MASK_2 = INDEX_HDR | ((1 << 2) - 1),
+    INDEX_MASK_3 = INDEX_HDR | ((1 << 3) - 1),
+    INDEX_MASK_4 = INDEX_HDR | ((1 << 4) - 1),
+    INDEX_MASK_5 = INDEX_HDR | ((1 << 5) - 1),
+    INDEX_MASK_6 = INDEX_HDR | ((1 << 6) - 1),
+    INDEX_MASK_7 = INDEX_HDR | ((1 << 7) - 1),
+    INDEX_MASK_8 = INDEX_HDR | ((1 << 8) - 1)
+};
+
+/**
+ * Major modes for a mobile device. The current mode setting affects audio
+ * routing.
+ */
+@export(name="audio_mode_t", value_prefix="AUDIO_MODE_")
+enum AudioMode : int32_t {
+    NORMAL           = 0,
+    RINGTONE         = 1,
+    /** Calls handled by the telephony stack (Eg: PSTN). */
+    IN_CALL          = 2,
+    /** Calls handled by apps (Eg: Hangout). */
+    IN_COMMUNICATION = 3,
+};
+
+@export(name="", value_prefix="AUDIO_DEVICE_")
+enum AudioDevice : uint32_t {
+    NONE                          = 0x0,
+    /** reserved bits */
+    BIT_IN                        = 0x80000000,
+    BIT_DEFAULT                   = 0x40000000,
+    /** output devices */
+    OUT_EARPIECE                  = 0x1,
+    OUT_SPEAKER                   = 0x2,
+    OUT_WIRED_HEADSET             = 0x4,
+    OUT_WIRED_HEADPHONE           = 0x8,
+    OUT_BLUETOOTH_SCO             = 0x10,
+    OUT_BLUETOOTH_SCO_HEADSET     = 0x20,
+    OUT_BLUETOOTH_SCO_CARKIT      = 0x40,
+    OUT_BLUETOOTH_A2DP            = 0x80,
+    OUT_BLUETOOTH_A2DP_HEADPHONES = 0x100,
+    OUT_BLUETOOTH_A2DP_SPEAKER    = 0x200,
+    OUT_AUX_DIGITAL               = 0x400,
+    OUT_HDMI                      = OUT_AUX_DIGITAL,
+    /** uses an analog connection (multiplexed over the USB pins for instance) */
+    OUT_ANLG_DOCK_HEADSET         = 0x800,
+    OUT_DGTL_DOCK_HEADSET         = 0x1000,
+    /** USB accessory mode: Android device is USB device and dock is USB host */
+    OUT_USB_ACCESSORY             = 0x2000,
+    /** USB host mode: Android device is USB host and dock is USB device */
+    OUT_USB_DEVICE                = 0x4000,
+    OUT_REMOTE_SUBMIX             = 0x8000,
+    /** Telephony voice TX path */
+    OUT_TELEPHONY_TX              = 0x10000,
+    /** Analog jack with line impedance detected */
+    OUT_LINE                      = 0x20000,
+    /** HDMI Audio Return Channel */
+    OUT_HDMI_ARC                  = 0x40000,
+    /** S/PDIF out */
+    OUT_SPDIF                     = 0x80000,
+    /** FM transmitter out */
+    OUT_FM                        = 0x100000,
+    /** Line out for av devices */
+    OUT_AUX_LINE                  = 0x200000,
+    /** limited-output speaker device for acoustic safety */
+    OUT_SPEAKER_SAFE              = 0x400000,
+    OUT_IP                        = 0x800000,
+    /** audio bus implemented by the audio system (e.g an MOST stereo channel) */
+    OUT_BUS                       = 0x1000000,
+    OUT_PROXY                     = 0x2000000,
+    OUT_USB_HEADSET               = 0x4000000,
+    OUT_HEARING_AID               = 0x8000000,
+    OUT_ECHO_CANCELLER            = 0x10000000,
+    OUT_DEFAULT                   = BIT_DEFAULT,
+    // Note that the 2.0 OUT_ALL* have been moved to helper functions
+
+    /** input devices */
+    IN_COMMUNICATION         = BIT_IN | 0x1,
+    IN_AMBIENT               = BIT_IN | 0x2,
+    IN_BUILTIN_MIC           = BIT_IN | 0x4,
+    IN_BLUETOOTH_SCO_HEADSET = BIT_IN | 0x8,
+    IN_WIRED_HEADSET         = BIT_IN | 0x10,
+    IN_AUX_DIGITAL           = BIT_IN | 0x20,
+    IN_HDMI                  = IN_AUX_DIGITAL,
+    /** Telephony voice RX path */
+    IN_VOICE_CALL            = BIT_IN | 0x40,
+    IN_TELEPHONY_RX          = IN_VOICE_CALL,
+    IN_BACK_MIC              = BIT_IN | 0x80,
+    IN_REMOTE_SUBMIX         = BIT_IN | 0x100,
+    IN_ANLG_DOCK_HEADSET     = BIT_IN | 0x200,
+    IN_DGTL_DOCK_HEADSET     = BIT_IN | 0x400,
+    IN_USB_ACCESSORY         = BIT_IN | 0x800,
+    IN_USB_DEVICE            = BIT_IN | 0x1000,
+    /** FM tuner input */
+    IN_FM_TUNER              = BIT_IN | 0x2000,
+    /** TV tuner input */
+    IN_TV_TUNER              = BIT_IN | 0x4000,
+    /** Analog jack with line impedance detected */
+    IN_LINE                  = BIT_IN | 0x8000,
+    /** S/PDIF in */
+    IN_SPDIF                 = BIT_IN | 0x10000,
+    IN_BLUETOOTH_A2DP        = BIT_IN | 0x20000,
+    IN_LOOPBACK              = BIT_IN | 0x40000,
+    IN_IP                    = BIT_IN | 0x80000,
+    /** audio bus implemented by the audio system (e.g an MOST stereo channel) */
+    IN_BUS                   = BIT_IN | 0x100000,
+    IN_PROXY                 = BIT_IN | 0x1000000,
+    IN_USB_HEADSET           = BIT_IN | 0x2000000,
+    IN_BLUETOOTH_BLE         = BIT_IN | 0x4000000,
+    IN_DEFAULT               = BIT_IN | BIT_DEFAULT,
+
+    // Note that the 2.0 IN_ALL* have been moved to helper functions
+};
+
+/**
+ * The audio output flags serve two purposes:
+ *
+ *  - when an AudioTrack is created they indicate a "wish" to be connected to an
+ *    output stream with attributes corresponding to the specified flags;
+ *
+ *  - when present in an output profile descriptor listed for a particular audio
+ *    hardware module, they indicate that an output stream can be opened that
+ *    supports the attributes indicated by the flags.
+ *
+ * The audio policy manager will try to match the flags in the request
+ * (when getOuput() is called) to an available output stream.
+ */
+@export(name="audio_output_flags_t", value_prefix="AUDIO_OUTPUT_FLAG_")
+enum AudioOutputFlag : int32_t {
+    NONE    = 0x0, // no attributes
+    DIRECT  = 0x1, // this output directly connects a track
+                   // to one output stream: no software mixer
+    PRIMARY = 0x2, // this output is the primary output of the device. It is
+                   // unique and must be present. It is opened by default and
+                   // receives routing, audio mode and volume controls related
+                   // to voice calls.
+    FAST    = 0x4,    // output supports "fast tracks", defined elsewhere
+    DEEP_BUFFER      = 0x8,   // use deep audio buffers
+    COMPRESS_OFFLOAD = 0x10,  // offload playback of compressed streams to
+                              // hardware codec
+    NON_BLOCKING     = 0x20,  // use non-blocking write
+    HW_AV_SYNC = 0x40,   // output uses a hardware A/V sync
+    TTS        = 0x80,   // output for streams transmitted through speaker at a
+                         // sample rate high enough to accommodate lower-range
+                         // ultrasonic p/b
+    RAW        = 0x100,  // minimize signal processing
+    SYNC       = 0x200,  // synchronize I/O streams
+    IEC958_NONAUDIO = 0x400, // Audio stream contains compressed audio in SPDIF
+                             // data bursts, not PCM.
+    DIRECT_PCM = 0x2000,     // Audio stream containing PCM data that needs
+                             // to pass through compress path for DSP post proc.
+    MMAP_NOIRQ = 0x4000, // output operates in MMAP no IRQ mode.
+    VOIP_RX = 0x8000,    // preferred output for VoIP calls.
+    /** preferred output for call music */
+    INCALL_MUSIC = 0x10000,
+};
+
+/**
+ * The audio input flags are analogous to audio output flags.
+ * Currently they are used only when an AudioRecord is created,
+ * to indicate a preference to be connected to an input stream with
+ * attributes corresponding to the specified flags.
+ */
+@export(name="audio_input_flags_t", value_prefix="AUDIO_INPUT_FLAG_")
+enum AudioInputFlag : int32_t {
+    NONE         = 0x0,  // no attributes
+    FAST         = 0x1,  // prefer an input that supports "fast tracks"
+    HW_HOTWORD   = 0x2,  // prefer an input that captures from hw hotword source
+    RAW          = 0x4,  // minimize signal processing
+    SYNC         = 0x8,  // synchronize I/O streams
+    MMAP_NOIRQ   = 0x10, // input operates in MMAP no IRQ mode.
+    VOIP_TX      = 0x20, // preferred input for VoIP calls.
+    HW_AV_SYNC   = 0x40, // input connected to an output that uses a hardware A/V sync
+};
+
+@export(name="audio_usage_t", value_prefix="AUDIO_USAGE_")
+enum AudioUsage : int32_t {
+    // These values must kept in sync with
+    //  frameworks/base/media/java/android/media/AudioAttributes.java
+    // Note that not all framework values are exposed
+    UNKNOWN                            = 0,
+    MEDIA                              = 1,
+    VOICE_COMMUNICATION                = 2,
+    VOICE_COMMUNICATION_SIGNALLING     = 3,
+    ALARM                              = 4,
+    NOTIFICATION                       = 5,
+    NOTIFICATION_TELEPHONY_RINGTONE    = 6,
+    ASSISTANCE_ACCESSIBILITY           = 11,
+    ASSISTANCE_NAVIGATION_GUIDANCE     = 12,
+    ASSISTANCE_SONIFICATION            = 13,
+    GAME                               = 14,
+    VIRTUAL_SOURCE                     = 15,
+    ASSISTANT                          = 16,
+};
+
+/** Type of audio generated by an application. */
+@export(name="audio_content_type_t", value_prefix="AUDIO_CONTENT_TYPE_")
+enum AudioContentType : uint32_t {
+    // Do not change these values without updating their counterparts
+    // in frameworks/base/media/java/android/media/AudioAttributes.java
+    UNKNOWN      = 0,
+    SPEECH       = 1,
+    MUSIC        = 2,
+    MOVIE        = 3,
+    SONIFICATION = 4,
+};
+
+/**
+ * Additional information about the stream passed to hardware decoders.
+ */
+struct AudioOffloadInfo {
+    uint32_t sampleRateHz;
+    bitfield<AudioChannelMask> channelMask;
+    AudioFormat format;
+    AudioStreamType streamType;
+    uint32_t bitRatePerSecond;
+    int64_t durationMicroseconds;  // -1 if unknown
+    bool hasVideo;
+    bool isStreaming;
+    uint32_t bitWidth;
+    uint32_t bufferSize;
+    AudioUsage usage;
+};
+
+/**
+ * Commonly used audio stream configuration parameters.
+ */
+struct AudioConfig {
+    uint32_t sampleRateHz;
+    bitfield<AudioChannelMask> channelMask;
+    AudioFormat format;
+    AudioOffloadInfo offloadInfo;
+    uint64_t frameCount;
+};
+
+/** Metadata of a playback track for a StreamOut. */
+struct PlaybackTrackMetadata {
+    AudioUsage usage;
+    AudioContentType contentType;
+    /**
+     * Positive linear gain applied to the track samples. 0 being muted and 1 is no attenuation,
+     * 2 means double amplification...
+     * Must not be negative.
+     */
+    float gain;
+};
+
+/** Metadatas of the source of a StreamOut. */
+struct SourceMetadata {
+    vec<PlaybackTrackMetadata> tracks;
+};
+
+/** Metadata of a record track for a StreamIn. */
+struct RecordTrackMetadata {
+    AudioSource source;
+    /**
+     * Positive linear gain applied to the track samples. 0 being muted and 1 is no attenuation,
+     * 2 means double amplification...
+     * Must not be negative.
+     */
+    float gain;
+};
+
+/** Metadatas of the source of a StreamIn. */
+struct SinkMetadata {
+    vec<RecordTrackMetadata> tracks;
+};
+
+
+/*
+ *
+ *  Volume control
+ *
+ */
+
+/**
+ * Type of gain control exposed by an audio port.
+ */
+@export(name="", value_prefix="AUDIO_GAIN_MODE_")
+enum AudioGainMode : uint32_t {
+    JOINT = 0x1,    // supports joint channel gain control
+    CHANNELS = 0x2, // supports separate channel gain control
+    RAMP = 0x4      // supports gain ramps
+};
+
+/**
+ * An audio_gain struct is a representation of a gain stage.
+ * A gain stage is always attached to an audio port.
+ */
+struct AudioGain {
+    bitfield<AudioGainMode> mode;
+    bitfield<AudioChannelMask> channelMask; // channels which gain an be controlled
+    int32_t minValue;     // minimum gain value in millibels
+    int32_t maxValue;     // maximum gain value in millibels
+    int32_t defaultValue; // default gain value in millibels
+    uint32_t stepValue;   // gain step in millibels
+    uint32_t minRampMs;   // minimum ramp duration in ms
+    uint32_t maxRampMs;   // maximum ramp duration in ms
+};
+
+/**
+ * The gain configuration structure is used to get or set the gain values of a
+ * given port.
+ */
+struct AudioGainConfig {
+    int32_t index;  // index of the corresponding AudioGain in AudioPort.gains
+    AudioGainMode mode;
+    AudioChannelMask channelMask;  // channels which gain value follows
+    /**
+     * 4 = sizeof(AudioChannelMask),
+     * 8 is not "FCC_8", so it won't need to be changed for > 8 channels.
+     * Gain values in millibels for each channel ordered from LSb to MSb in
+     * channel mask. The number of values is 1 in joint mode or
+     * popcount(channel_mask).
+     */
+    int32_t[4 * 8] values;
+    uint32_t rampDurationMs;  // ramp duration in ms
+};
+
+
+/*
+ *
+ *  Routing control
+ *
+ */
+
+/*
+ * Types defined here are used to describe an audio source or sink at internal
+ * framework interfaces (audio policy, patch panel) or at the audio HAL.
+ * Sink and sources are grouped in a concept of “audio port” representing an
+ * audio end point at the edge of the system managed by the module exposing
+ * the interface.
+ */
+
+/** Audio port role: either source or sink */
+@export(name="audio_port_role_t", value_prefix="AUDIO_PORT_ROLE_")
+enum AudioPortRole : int32_t {
+    NONE,
+    SOURCE,
+    SINK,
+};
+
+/**
+ * Audio port type indicates if it is a session (e.g AudioTrack), a mix (e.g
+ * PlaybackThread output) or a physical device (e.g OUT_SPEAKER)
+ */
+@export(name="audio_port_type_t", value_prefix="AUDIO_PORT_TYPE_")
+enum AudioPortType : int32_t {
+    NONE,
+    DEVICE,
+    MIX,
+    SESSION,
+};
+
+/**
+ * Extension for audio port configuration structure when the audio port is a
+ * hardware device.
+ */
+struct AudioPortConfigDeviceExt {
+    AudioModuleHandle hwModule;  // module the device is attached to
+    AudioDevice type;            // device type (e.g OUT_SPEAKER)
+    uint8_t[32] address;         // device address. "" if N/A
+};
+
+/**
+ * Extension for audio port configuration structure when the audio port is an
+ * audio session.
+ */
+struct AudioPortConfigSessionExt {
+    AudioSession session;
+};
+
+/**
+ * Flags indicating which fields are to be considered in AudioPortConfig.
+ */
+@export(name="", value_prefix="AUDIO_PORT_CONFIG_")
+enum AudioPortConfigMask : uint32_t {
+    SAMPLE_RATE = 0x1,
+    CHANNEL_MASK =  0x2,
+    FORMAT = 0x4,
+    GAIN = 0x8,
+};
+
+/**
+ * Audio port configuration structure used to specify a particular configuration
+ * of an audio port.
+ */
+struct AudioPortConfig {
+    AudioPortHandle id;
+    bitfield<AudioPortConfigMask> configMask;
+    uint32_t sampleRateHz;
+    bitfield<AudioChannelMask> channelMask;
+    AudioFormat format;
+    AudioGainConfig gain;
+    AudioPortType type;  // type is used as a discriminator for Ext union
+    AudioPortRole role;  // role is used as a discriminator for UseCase union
+    union Ext {
+        AudioPortConfigDeviceExt device;
+        struct AudioPortConfigMixExt {
+            AudioModuleHandle hwModule; // module the stream is attached to
+            AudioIoHandle ioHandle;     // I/O handle of the input/output stream
+            union UseCase {
+                AudioStreamType stream;
+                AudioSource source;
+            } useCase;
+        } mix;
+        AudioPortConfigSessionExt session;
+    } ext;
+};
+
+/**
+ * Extension for audio port structure when the audio port is a hardware device.
+ */
+struct AudioPortDeviceExt {
+    AudioModuleHandle hwModule;    // module the device is attached to
+    AudioDevice type;
+    /** 32 byte string identifying the port. */
+    uint8_t[32] address;
+};
+
+/**
+ * Latency class of the audio mix.
+ */
+@export(name="audio_mix_latency_class_t", value_prefix="AUDIO_LATENCY_")
+enum AudioMixLatencyClass : int32_t {
+    LOW,
+    NORMAL
+};
+
+struct AudioPortMixExt {
+    AudioModuleHandle hwModule;     // module the stream is attached to
+    AudioIoHandle ioHandle;         // I/O handle of the stream
+    AudioMixLatencyClass latencyClass;
+};
+
+/**
+ * Extension for audio port structure when the audio port is an audio session.
+ */
+struct AudioPortSessionExt {
+    AudioSession session;
+};
+
+struct AudioPort {
+    AudioPortHandle id;
+    AudioPortRole role;
+    string name;
+    vec<uint32_t> sampleRates;
+    vec<bitfield<AudioChannelMask>> channelMasks;
+    vec<AudioFormat> formats;
+    vec<AudioGain> gains;
+    AudioPortConfig activeConfig; // current audio port configuration
+    AudioPortType type;  // type is used as a discriminator
+    union Ext {
+        AudioPortDeviceExt device;
+        AudioPortMixExt mix;
+        AudioPortSessionExt session;
+    } ext;
+};
+
+struct ThreadInfo {
+    int64_t pid;
+    int64_t tid;
+};
diff --git a/audio/common/all-versions/default/service/android.hardware.audio@2.0-service.rc b/audio/common/all-versions/default/service/android.hardware.audio@2.0-service.rc
index 8217b94..6e91bcc 100644
--- a/audio/common/all-versions/default/service/android.hardware.audio@2.0-service.rc
+++ b/audio/common/all-versions/default/service/android.hardware.audio@2.0-service.rc
@@ -2,7 +2,8 @@
     class hal
     user audioserver
     # media gid needed for /dev/fm (radio) and for /data/misc/media (tee)
-    group audio camera drmrpc inet media mediadrm net_bt net_bt_admin net_bw_acct
+    group audio camera drmrpc inet media mediadrm net_bt net_bt_admin net_bw_acct wakelock
+    capabilities BLOCK_SUSPEND
     ioprio rt 4
     writepid /dev/cpuset/foreground/tasks /dev/stune/foreground/tasks
     # audioflinger restarts itself when it loses connection with the hal
diff --git a/audio/core/2.0/vts/functional/Android.bp b/audio/core/2.0/vts/functional/Android.bp
index d1ddaff..c8441cf 100644
--- a/audio/core/2.0/vts/functional/Android.bp
+++ b/audio/core/2.0/vts/functional/Android.bp
@@ -27,6 +27,8 @@
         "android.hardware.audio.common@2.0",
         "libicuuc",
         "libicuuc_stubdata",
+        "libandroidicu",
         "libxml2",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/audio/core/4.0/vts/functional/Android.bp b/audio/core/4.0/vts/functional/Android.bp
index e3b376c..7ebb688 100644
--- a/audio/core/4.0/vts/functional/Android.bp
+++ b/audio/core/4.0/vts/functional/Android.bp
@@ -27,6 +27,7 @@
         "android.hardware.audio.common@4.0",
         "libicuuc",
         "libicuuc_stubdata",
+        "libandroidicu",
         "libxml2",
     ],
     shared_libs: [
@@ -35,4 +36,5 @@
     header_libs: [
         "android.hardware.audio.common.util@all-versions",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/audio/core/4.0/vts/functional/AudioPrimaryHidlHalTest.cpp b/audio/core/4.0/vts/functional/AudioPrimaryHidlHalTest.cpp
index 46c228a..8a8338b 100644
--- a/audio/core/4.0/vts/functional/AudioPrimaryHidlHalTest.cpp
+++ b/audio/core/4.0/vts/functional/AudioPrimaryHidlHalTest.cpp
@@ -61,7 +61,7 @@
 using ::android::sp;
 using ::android::hardware::EventFlag;
 using ::android::hardware::hidl_bitfield;
-using ::android::hardware::hidl_enum_iterator;
+using ::android::hardware::hidl_enum_range;
 using ::android::hardware::hidl_handle;
 using ::android::hardware::hidl_string;
 using ::android::hardware::hidl_vec;
@@ -1174,7 +1174,7 @@
 TEST_P(InputStreamTest, updateSinkMetadata) {
     doc::test("The HAL should not crash on metadata change");
 
-    hidl_enum_iterator<AudioSource> range;
+    hidl_enum_range<AudioSource> range;
     // Test all possible track configuration
     for (AudioSource source : range) {
         for (float volume : {0.0, 0.5, 1.0}) {
@@ -1418,8 +1418,8 @@
 TEST_P(OutputStreamTest, updateSourceMetadata) {
     doc::test("The HAL should not crash on metadata change");
 
-    hidl_enum_iterator<AudioUsage> usageRange;
-    hidl_enum_iterator<AudioContentType> contentRange;
+    hidl_enum_range<AudioUsage> usageRange;
+    hidl_enum_range<AudioContentType> contentRange;
     // Test all possible track configuration
     for (auto usage : usageRange) {
         for (auto content : contentRange) {
diff --git a/audio/core/all-versions/default/include/core/all-versions/default/Stream.h b/audio/core/all-versions/default/include/core/all-versions/default/Stream.h
index 6f79429..7cf12dd 100644
--- a/audio/core/all-versions/default/include/core/all-versions/default/Stream.h
+++ b/audio/core/all-versions/default/include/core/all-versions/default/Stream.h
@@ -163,8 +163,23 @@
         if (retval == Result::OK) {
             hidlHandle = native_handle_create(1, 0);
             hidlHandle->data[0] = halInfo.shared_memory_fd;
-            info.sharedMemory =
+
+            // Negative buffer size frame is a legacy hack to indicate that the buffer
+            // is shareable to applications before the relevant flag was introduced
+            bool applicationShareable =
+                halInfo.flags & AUDIO_MMAP_APPLICATION_SHAREABLE || halInfo.buffer_size_frames < 0;
+            halInfo.buffer_size_frames = abs(halInfo.buffer_size_frames);
+            info.sharedMemory =  // hidl_memory size must always be positive
                 hidl_memory("audio_buffer", hidlHandle, frameSize * halInfo.buffer_size_frames);
+#ifdef AUDIO_HAL_VERSION_2_0
+            if (applicationShareable) {
+                halInfo.buffer_size_frames *= -1;
+            }
+#else
+            info.flags =
+                halInfo.flags | (applicationShareable ? MmapBufferFlag::APPLICATION_SHAREABLE
+                                                      : MmapBufferFlag::NONE);
+#endif
             info.bufferSizeFrames = halInfo.buffer_size_frames;
             info.burstSizeFrames = halInfo.burst_size_frames;
         }
diff --git a/audio/effect/2.0/vts/functional/Android.bp b/audio/effect/2.0/vts/functional/Android.bp
index 51d2e11..068314f 100644
--- a/audio/effect/2.0/vts/functional/Android.bp
+++ b/audio/effect/2.0/vts/functional/Android.bp
@@ -30,6 +30,8 @@
         "libeffectsconfig",
         "libicuuc",
         "libicuuc_stubdata",
+        "libandroidicu",
         "libxml2",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/audio/effect/4.0/vts/functional/Android.bp b/audio/effect/4.0/vts/functional/Android.bp
index 96ded69..886f92d 100644
--- a/audio/effect/4.0/vts/functional/Android.bp
+++ b/audio/effect/4.0/vts/functional/Android.bp
@@ -30,9 +30,11 @@
         "libeffectsconfig",
         "libicuuc",
         "libicuuc_stubdata",
+        "libandroidicu",
         "libxml2",
     ],
     header_libs: [
         "android.hardware.audio.common.util@all-versions",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/audio/effect/5.0/Android.bp b/audio/effect/5.0/Android.bp
new file mode 100644
index 0000000..d60d94a
--- /dev/null
+++ b/audio/effect/5.0/Android.bp
@@ -0,0 +1,47 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.audio.effect@5.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IAcousticEchoCancelerEffect.hal",
+        "IAutomaticGainControlEffect.hal",
+        "IBassBoostEffect.hal",
+        "IDownmixEffect.hal",
+        "IEffect.hal",
+        "IEffectBufferProviderCallback.hal",
+        "IEffectsFactory.hal",
+        "IEnvironmentalReverbEffect.hal",
+        "IEqualizerEffect.hal",
+        "ILoudnessEnhancerEffect.hal",
+        "INoiseSuppressionEffect.hal",
+        "IPresetReverbEffect.hal",
+        "IVirtualizerEffect.hal",
+        "IVisualizerEffect.hal",
+    ],
+    interfaces: [
+        "android.hardware.audio.common@5.0",
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "AudioBuffer",
+        "EffectAuxChannelsConfig",
+        "EffectBufferAccess",
+        "EffectBufferConfig",
+        "EffectConfig",
+        "EffectConfigParameters",
+        "EffectDescriptor",
+        "EffectFeature",
+        "EffectFlags",
+        "EffectOffloadParameter",
+        "MessageQueueFlagBits",
+        "Result",
+    ],
+    gen_java: false,
+    gen_java_constants: true,
+}
+
diff --git a/audio/effect/5.0/IAcousticEchoCancelerEffect.hal b/audio/effect/5.0/IAcousticEchoCancelerEffect.hal
new file mode 100644
index 0000000..61cdc95
--- /dev/null
+++ b/audio/effect/5.0/IAcousticEchoCancelerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IAcousticEchoCancelerEffect extends IEffect {
+    /**
+     * Sets echo delay value in milliseconds.
+     */
+    setEchoDelay(uint32_t echoDelayMs) generates (Result retval);
+
+    /**
+     * Gets echo delay value in milliseconds.
+     */
+    getEchoDelay() generates (Result retval, uint32_t echoDelayMs);
+};
diff --git a/audio/effect/5.0/IAutomaticGainControlEffect.hal b/audio/effect/5.0/IAutomaticGainControlEffect.hal
new file mode 100644
index 0000000..ae354ec
--- /dev/null
+++ b/audio/effect/5.0/IAutomaticGainControlEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IAutomaticGainControlEffect extends IEffect {
+    /**
+     * Sets target level in millibels.
+     */
+    setTargetLevel(int16_t targetLevelMb) generates (Result retval);
+
+    /**
+     * Gets target level.
+     */
+    getTargetLevel() generates (Result retval, int16_t targetLevelMb);
+
+    /**
+     * Sets gain in the compression range in millibels.
+     */
+    setCompGain(int16_t compGainMb) generates (Result retval);
+
+    /**
+     * Gets gain in the compression range.
+     */
+    getCompGain() generates (Result retval, int16_t compGainMb);
+
+    /**
+     * Enables or disables limiter.
+     */
+    setLimiterEnabled(bool enabled) generates (Result retval);
+
+    /**
+     * Returns whether limiter is enabled.
+     */
+    isLimiterEnabled() generates (Result retval, bool enabled);
+
+    struct AllProperties {
+        int16_t targetLevelMb;
+        int16_t compGainMb;
+        bool limiterEnabled;
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/5.0/IBassBoostEffect.hal b/audio/effect/5.0/IBassBoostEffect.hal
new file mode 100644
index 0000000..4b3b629
--- /dev/null
+++ b/audio/effect/5.0/IBassBoostEffect.hal
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IBassBoostEffect extends IEffect {
+    /**
+     * Returns whether setting bass boost strength is supported.
+     */
+    isStrengthSupported() generates (Result retval, bool strengthSupported);
+
+    enum StrengthRange : uint16_t {
+        MIN = 0,
+        MAX = 1000
+    };
+
+    /**
+     * Sets bass boost strength.
+     *
+     * @param strength strength of the effect. The valid range for strength
+     *                 strength is [0, 1000], where 0 per mille designates the
+     *                 mildest effect and 1000 per mille designates the
+     *                 strongest.
+     * @return retval operation completion status.
+     */
+    setStrength(uint16_t strength) generates (Result retval);
+
+    /**
+     * Gets virtualization strength.
+     */
+    getStrength() generates (Result retval, uint16_t strength);
+};
diff --git a/audio/effect/5.0/IDownmixEffect.hal b/audio/effect/5.0/IDownmixEffect.hal
new file mode 100644
index 0000000..43d4b23
--- /dev/null
+++ b/audio/effect/5.0/IDownmixEffect.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IDownmixEffect extends IEffect {
+    enum Type : int32_t {
+        STRIP, // throw away the extra channels
+        FOLD   // mix the extra channels with FL/FR
+    };
+
+    /**
+     * Sets the current downmix preset.
+     */
+    setType(Type preset) generates (Result retval);
+
+    /**
+     * Gets the current downmix preset.
+     */
+    getType() generates (Result retval, Type preset);
+};
diff --git a/audio/effect/5.0/IEffect.hal b/audio/effect/5.0/IEffect.hal
new file mode 100644
index 0000000..9c50963
--- /dev/null
+++ b/audio/effect/5.0/IEffect.hal
@@ -0,0 +1,418 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffectBufferProviderCallback;
+
+interface IEffect {
+    /**
+     * Initialize effect engine--all configurations return to default.
+     *
+     * @return retval operation completion status.
+     */
+    @entry
+    init() generates (Result retval);
+
+    /**
+     * Apply new audio parameters configurations for input and output buffers.
+     * The provider callbacks may be empty, but in this case the buffer
+     * must be provided in the EffectConfig structure.
+     *
+     * @param config configuration descriptor.
+     * @param inputBufferProvider optional buffer provider reference.
+     * @param outputBufferProvider optional buffer provider reference.
+     * @return retval operation completion status.
+     */
+    setConfig(EffectConfig config,
+            IEffectBufferProviderCallback inputBufferProvider,
+            IEffectBufferProviderCallback outputBufferProvider)
+            generates (Result retval);
+
+    /**
+     * Reset the effect engine. Keep configuration but resets state and buffer
+     * content.
+     *
+     * @return retval operation completion status.
+     */
+    reset() generates (Result retval);
+
+    /**
+     * Enable processing.
+     *
+     * @return retval operation completion status.
+     */
+    @callflow(next={"prepareForProcessing"})
+    enable() generates (Result retval);
+
+    /**
+     * Disable processing.
+     *
+     * @return retval operation completion status.
+     */
+    @callflow(next={"close"})
+    disable() generates (Result retval);
+
+    /**
+     * Set the rendering device the audio output path is connected to.  The
+     * effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its
+     * descriptor to receive this command when the device changes.
+     *
+     * Note: this method is only supported for effects inserted into
+     *       the output chain.
+     *
+     * @param device output device specification.
+     * @return retval operation completion status.
+     */
+    setDevice(bitfield<AudioDevice> device) generates (Result retval);
+
+    /**
+     * Set and get volume. Used by audio framework to delegate volume control to
+     * effect engine. The effect implementation must set EFFECT_FLAG_VOLUME_CTRL
+     * flag in its descriptor to receive this command. The effect engine must
+     * return the volume that should be applied before the effect is
+     * processed. The overall volume (the volume actually applied by the effect
+     * engine multiplied by the returned value) should match the value indicated
+     * in the command.
+     *
+     * @param volumes vector containing volume for each channel defined in
+     *                EffectConfig for output buffer expressed in 8.24 fixed
+     *                point format.
+     * @return result updated volume values.
+     * @return retval operation completion status.
+     */
+    setAndGetVolume(vec<uint32_t> volumes)
+            generates (Result retval, vec<uint32_t> result);
+
+    /**
+     * Notify the effect of the volume change. The effect implementation must
+     * set EFFECT_FLAG_VOLUME_IND flag in its descriptor to receive this
+     * command.
+     *
+     * @param volumes vector containing volume for each channel defined in
+     *                EffectConfig for output buffer expressed in 8.24 fixed
+     *                point format.
+     * @return retval operation completion status.
+     */
+    volumeChangeNotification(vec<uint32_t> volumes)
+            generates (Result retval);
+
+    /**
+     * Set the audio mode. The effect implementation must set
+     * EFFECT_FLAG_AUDIO_MODE_IND flag in its descriptor to receive this command
+     * when the audio mode changes.
+     *
+     * @param mode desired audio mode.
+     * @return retval operation completion status.
+     */
+    setAudioMode(AudioMode mode) generates (Result retval);
+
+    /**
+     * Apply new audio parameters configurations for input and output buffers of
+     * reverse stream.  An example of reverse stream is the echo reference
+     * supplied to an Acoustic Echo Canceler.
+     *
+     * @param config configuration descriptor.
+     * @param inputBufferProvider optional buffer provider reference.
+     * @param outputBufferProvider optional buffer provider reference.
+     * @return retval operation completion status.
+     */
+    setConfigReverse(EffectConfig config,
+            IEffectBufferProviderCallback inputBufferProvider,
+            IEffectBufferProviderCallback outputBufferProvider)
+            generates (Result retval);
+
+    /**
+     * Set the capture device the audio input path is connected to. The effect
+     * implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to
+     * receive this command when the device changes.
+     *
+     * Note: this method is only supported for effects inserted into
+     *       the input chain.
+     *
+     * @param device input device specification.
+     * @return retval operation completion status.
+     */
+    setInputDevice(bitfield<AudioDevice> device) generates (Result retval);
+
+    /**
+     * Read audio parameters configurations for input and output buffers.
+     *
+     * @return retval operation completion status.
+     * @return config configuration descriptor.
+     */
+    getConfig() generates (Result retval, EffectConfig config);
+
+    /**
+     * Read audio parameters configurations for input and output buffers of
+     * reverse stream.
+     *
+     * @return retval operation completion status.
+     * @return config configuration descriptor.
+     */
+    getConfigReverse() generates (Result retval, EffectConfig config);
+
+    /**
+     * Queries for supported combinations of main and auxiliary channels
+     * (e.g. for a multi-microphone noise suppressor).
+     *
+     * @param maxConfigs maximum number of the combinations to return.
+     * @return retval absence of the feature support is indicated using
+     *                NOT_SUPPORTED code. RESULT_TOO_BIG is returned if
+     *                the number of supported combinations exceeds 'maxConfigs'.
+     * @return result list of configuration descriptors.
+     */
+    getSupportedAuxChannelsConfigs(uint32_t maxConfigs)
+            generates (Result retval, vec<EffectAuxChannelsConfig> result);
+
+    /**
+     * Retrieves the current configuration of main and auxiliary channels.
+     *
+     * @return retval absence of the feature support is indicated using
+     *                NOT_SUPPORTED code.
+     * @return result configuration descriptor.
+     */
+    getAuxChannelsConfig()
+            generates (Result retval, EffectAuxChannelsConfig result);
+
+    /**
+     * Sets the current configuration of main and auxiliary channels.
+     *
+     * @return retval operation completion status; absence of the feature
+     *                support is indicated using NOT_SUPPORTED code.
+     */
+    setAuxChannelsConfig(EffectAuxChannelsConfig config)
+            generates (Result retval);
+
+    /**
+     * Set the audio source the capture path is configured for (Camcorder, voice
+     * recognition...).
+     *
+     * Note: this method is only supported for effects inserted into
+     *       the input chain.
+     *
+     * @param source source descriptor.
+     * @return retval operation completion status.
+     */
+    setAudioSource(AudioSource source) generates (Result retval);
+
+    /**
+     * This command indicates if the playback thread the effect is attached to
+     * is offloaded or not, and updates the I/O handle of the playback thread
+     * the effect is attached to.
+     *
+     * @param param effect offload descriptor.
+     * @return retval operation completion status.
+     */
+    offload(EffectOffloadParameter param) generates (Result retval);
+
+    /**
+     * Returns the effect descriptor.
+     *
+     * @return retval operation completion status.
+     * @return descriptor effect descriptor.
+     */
+    getDescriptor() generates (Result retval, EffectDescriptor descriptor);
+
+    /**
+     * Set up required transports for passing audio buffers to the effect.
+     *
+     * The transport consists of shared memory and a message queue for reporting
+     * effect processing operation status. The shared memory is set up
+     * separately using 'setProcessBuffers' method.
+     *
+     * Processing is requested by setting 'REQUEST_PROCESS' or
+     * 'REQUEST_PROCESS_REVERSE' EventFlags associated with the status message
+     * queue. The result of processing may be one of the following:
+     *   OK if there were no errors during processing;
+     *   INVALID_ARGUMENTS if audio buffers are invalid;
+     *   INVALID_STATE if the engine has finished the disable phase;
+     *   NOT_INITIALIZED if the audio buffers were not set;
+     *   NOT_SUPPORTED if the requested processing type is not supported by
+     *                 the effect.
+     *
+     * @return retval OK if both message queues were created successfully.
+     *                INVALID_STATE if the method was already called.
+     *                INVALID_ARGUMENTS if there was a problem setting up
+     *                                  the queue.
+     * @return statusMQ a message queue used for passing status from the effect.
+     */
+    @callflow(next={"setProcessBuffers"})
+    prepareForProcessing() generates (Result retval, fmq_sync<Result> statusMQ);
+
+    /**
+     * Set up input and output buffers for processing audio data. The effect
+     * may modify both the input and the output buffer during the operation.
+     * Buffers may be set multiple times during effect lifetime.
+     *
+     * The input and the output buffer may be reused between different effects,
+     * and the input buffer may be used as an output buffer. Buffers are
+     * distinguished using 'AudioBuffer.id' field.
+     *
+     * @param inBuffer input audio buffer.
+     * @param outBuffer output audio buffer.
+     * @return retval OK if both buffers were mapped successfully.
+     *                INVALID_ARGUMENTS if there was a problem with mapping
+     *                                  any of the buffers.
+     */
+    setProcessBuffers(AudioBuffer inBuffer, AudioBuffer outBuffer)
+            generates (Result retval);
+
+    /**
+     * Execute a vendor specific command on the effect. The command code
+     * and data, as well as result data are not interpreted by Android
+     * Framework and are passed as-is between the application and the effect.
+     *
+     * The effect must use standard POSIX.1-2001 error codes for the operation
+     * completion status.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it. This method only works for effects
+     * implemented in software.
+     *
+     * @param commandId the ID of the command.
+     * @param data command data.
+     * @param resultMaxSize maximum size in bytes of the result; can be 0.
+     * @return status command completion status.
+     * @return result result data.
+     */
+    command(uint32_t commandId, vec<uint8_t> data, uint32_t resultMaxSize)
+            generates (int32_t status, vec<uint8_t> result);
+
+    /**
+     * Set a vendor-specific parameter and apply it immediately. The parameter
+     * code and data are not interpreted by Android Framework and are passed
+     * as-is between the application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+     * unknown or if provided parameter data is invalid. If the effect does not
+     * support setting vendor-specific parameters, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it. This method only works for effects
+     * implemented in software.
+     *
+     * @param parameter identifying data of the parameter.
+     * @param value the value of the parameter.
+     * @return retval operation completion status.
+     */
+    setParameter(vec<uint8_t> parameter, vec<uint8_t> value)
+            generates (Result retval);
+
+    /**
+     * Get a vendor-specific parameter value. The parameter code and returned
+     * data are not interpreted by Android Framework and are passed as-is
+     * between the application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+     * unknown. If the effect does not support setting vendor-specific
+     * parameters, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param parameter identifying data of the parameter.
+     * @param valueMaxSize maximum size in bytes of the value.
+     * @return retval operation completion status.
+     * @return result the value of the parameter.
+     */
+    getParameter(vec<uint8_t> parameter, uint32_t valueMaxSize)
+            generates (Result retval, vec<uint8_t> value);
+
+    /**
+     * Get supported configs for a vendor-specific feature. The configs returned
+     * are not interpreted by Android Framework and are passed as-is between the
+     * application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+     * unknown. If the effect does not support getting vendor-specific feature
+     * configs, it must return NOT_SUPPORTED. If the feature is supported but
+     * the total number of supported configurations exceeds the maximum number
+     * indicated by the caller, the method must return RESULT_TOO_BIG.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param featureId feature identifier.
+     * @param maxConfigs maximum number of configs to return.
+     * @param configSize size of each config in bytes.
+     * @return retval operation completion status.
+     * @return configsCount number of configs returned.
+     * @return configsData data for all the configs returned.
+     */
+    getSupportedConfigsForFeature(
+            uint32_t featureId,
+            uint32_t maxConfigs,
+            uint32_t configSize) generates (
+                    Result retval,
+                    uint32_t configsCount,
+                    vec<uint8_t> configsData);
+
+    /**
+     * Get the current config for a vendor-specific feature. The config returned
+     * is not interpreted by Android Framework and is passed as-is between the
+     * application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+     * unknown. If the effect does not support getting vendor-specific
+     * feature configs, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param featureId feature identifier.
+     * @param configSize size of the config in bytes.
+     * @return retval operation completion status.
+     * @return configData config data.
+     */
+    getCurrentConfigForFeature(uint32_t featureId, uint32_t configSize)
+            generates (Result retval, vec<uint8_t> configData);
+
+    /**
+     * Set the current config for a vendor-specific feature. The config data
+     * is not interpreted by Android Framework and is passed as-is between the
+     * application and the effect.
+     *
+     * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+     * unknown. If the effect does not support getting vendor-specific
+     * feature configs, it must return NOT_SUPPORTED.
+     *
+     * Use this method only if the effect is provided by a third party, and
+     * there is no interface defined for it.  This method only works for effects
+     * implemented in software.
+     *
+     * @param featureId feature identifier.
+     * @param configData config data.
+     * @return retval operation completion status.
+     */
+    setCurrentConfigForFeature(uint32_t featureId, vec<uint8_t> configData)
+            generates (Result retval);
+
+    /**
+     * Called by the framework to deinitialize the effect and free up
+     * all the currently allocated resources. It is recommended to close
+     * the effect on the client side as soon as it is becomes unused.
+     *
+     * @return retval OK in case the success.
+     *                INVALID_STATE if the effect was already closed.
+     */
+    @exit
+    close() generates (Result retval);
+};
diff --git a/audio/effect/5.0/IEffectBufferProviderCallback.hal b/audio/effect/5.0/IEffectBufferProviderCallback.hal
new file mode 100644
index 0000000..aabd15e
--- /dev/null
+++ b/audio/effect/5.0/IEffectBufferProviderCallback.hal
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+/**
+ * This callback interface contains functions that can be used by the effect
+ * engine 'process' function to exchange input and output audio buffers.
+ */
+interface IEffectBufferProviderCallback {
+    /**
+     * Called to retrieve a buffer where data should read from by 'process'
+     * function.
+     *
+     * @return buffer audio buffer for processing
+     */
+    getBuffer() generates (AudioBuffer buffer);
+
+    /**
+     * Called to provide a buffer with the data written by 'process' function.
+     *
+     * @param buffer audio buffer for processing
+     */
+    putBuffer(AudioBuffer buffer);
+};
diff --git a/audio/effect/5.0/IEffectsFactory.hal b/audio/effect/5.0/IEffectsFactory.hal
new file mode 100644
index 0000000..a88b381
--- /dev/null
+++ b/audio/effect/5.0/IEffectsFactory.hal
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IEffectsFactory {
+    /**
+     * Returns descriptors of different effects in all loaded libraries.
+     *
+     * @return retval operation completion status.
+     * @return result list of effect descriptors.
+     */
+    getAllDescriptors() generates(Result retval, vec<EffectDescriptor> result);
+
+    /**
+     * Returns a descriptor of a particular effect.
+     *
+     * @return retval operation completion status.
+     * @return result effect descriptor.
+     */
+    getDescriptor(Uuid uid) generates(Result retval, EffectDescriptor result);
+
+    /**
+     * Creates an effect engine of the specified type.  To release the effect
+     * engine, it is necessary to release references to the returned effect
+     * object.
+     *
+     * @param uid effect uuid.
+     * @param session audio session to which this effect instance will be
+     *                attached.  All effects created with the same session ID
+     *                are connected in series and process the same signal
+     *                stream.
+     * @param ioHandle identifies the output or input stream this effect is
+     *                 directed to in audio HAL.
+     * @return retval operation completion status.
+     * @return result the interface for the created effect.
+     * @return effectId the unique ID of the effect to be used with
+     *                  IStream::addEffect and IStream::removeEffect methods.
+     */
+    createEffect(Uuid uid, AudioSession session, AudioIoHandle ioHandle)
+        generates (Result retval, IEffect result, uint64_t effectId);
+};
diff --git a/audio/effect/5.0/IEnvironmentalReverbEffect.hal b/audio/effect/5.0/IEnvironmentalReverbEffect.hal
new file mode 100644
index 0000000..ffc4312
--- /dev/null
+++ b/audio/effect/5.0/IEnvironmentalReverbEffect.hal
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IEnvironmentalReverbEffect extends IEffect {
+    /**
+     * Sets whether the effect should be bypassed.
+     */
+    setBypass(bool bypass) generates (Result retval);
+
+    /**
+     * Gets whether the effect should be bypassed.
+     */
+    getBypass() generates (Result retval, bool bypass);
+
+    enum ParamRange : int16_t {
+        ROOM_LEVEL_MIN = -6000,
+        ROOM_LEVEL_MAX = 0,
+        ROOM_HF_LEVEL_MIN = -4000,
+        ROOM_HF_LEVEL_MAX = 0,
+        DECAY_TIME_MIN = 100,
+        DECAY_TIME_MAX = 20000,
+        DECAY_HF_RATIO_MIN = 100,
+        DECAY_HF_RATIO_MAX = 1000,
+        REFLECTIONS_LEVEL_MIN = -6000,
+        REFLECTIONS_LEVEL_MAX = 0,
+        REFLECTIONS_DELAY_MIN = 0,
+        REFLECTIONS_DELAY_MAX = 65,
+        REVERB_LEVEL_MIN = -6000,
+        REVERB_LEVEL_MAX = 0,
+        REVERB_DELAY_MIN = 0,
+        REVERB_DELAY_MAX = 65,
+        DIFFUSION_MIN = 0,
+        DIFFUSION_MAX = 1000,
+        DENSITY_MIN = 0,
+        DENSITY_MAX = 1000
+    };
+
+    /**
+     * Sets the room level.
+     */
+    setRoomLevel(int16_t roomLevel) generates (Result retval);
+
+    /**
+     * Gets the room level.
+     */
+    getRoomLevel() generates (Result retval, int16_t roomLevel);
+
+    /**
+     * Sets the room high frequencies level.
+     */
+    setRoomHfLevel(int16_t roomHfLevel) generates (Result retval);
+
+    /**
+     * Gets the room high frequencies level.
+     */
+    getRoomHfLevel() generates (Result retval, int16_t roomHfLevel);
+
+    /**
+     * Sets the room decay time.
+     */
+    setDecayTime(uint32_t decayTime) generates (Result retval);
+
+    /**
+     * Gets the room decay time.
+     */
+    getDecayTime() generates (Result retval, uint32_t decayTime);
+
+    /**
+     * Sets the ratio of high frequencies decay.
+     */
+    setDecayHfRatio(int16_t decayHfRatio) generates (Result retval);
+
+    /**
+     * Gets the ratio of high frequencies decay.
+     */
+    getDecayHfRatio() generates (Result retval, int16_t decayHfRatio);
+
+    /**
+     * Sets the level of reflections in the room.
+     */
+    setReflectionsLevel(int16_t reflectionsLevel) generates (Result retval);
+
+    /**
+     * Gets the level of reflections in the room.
+     */
+    getReflectionsLevel() generates (Result retval, int16_t reflectionsLevel);
+
+    /**
+     * Sets the reflections delay in the room.
+     */
+    setReflectionsDelay(uint32_t reflectionsDelay) generates (Result retval);
+
+    /**
+     * Gets the reflections delay in the room.
+     */
+    getReflectionsDelay() generates (Result retval, uint32_t reflectionsDelay);
+
+    /**
+     * Sets the reverb level of the room.
+     */
+    setReverbLevel(int16_t reverbLevel) generates (Result retval);
+
+    /**
+     * Gets the reverb level of the room.
+     */
+    getReverbLevel() generates (Result retval, int16_t reverbLevel);
+
+    /**
+     * Sets the reverb delay of the room.
+     */
+    setReverbDelay(uint32_t reverDelay) generates (Result retval);
+
+    /**
+     * Gets the reverb delay of the room.
+     */
+    getReverbDelay() generates (Result retval, uint32_t reverbDelay);
+
+    /**
+     * Sets room diffusion.
+     */
+    setDiffusion(int16_t diffusion) generates (Result retval);
+
+    /**
+     * Gets room diffusion.
+     */
+    getDiffusion() generates (Result retval, int16_t diffusion);
+
+    /**
+     * Sets room wall density.
+     */
+    setDensity(int16_t density) generates (Result retval);
+
+    /**
+     * Gets room wall density.
+     */
+    getDensity() generates (Result retval, int16_t density);
+
+    struct AllProperties {
+        int16_t  roomLevel;         // in millibels,    range -6000 to 0
+        int16_t  roomHfLevel;       // in millibels,    range -4000 to 0
+        uint32_t decayTime;         // in milliseconds, range 100 to 20000
+        int16_t  decayHfRatio;      // in permilles,    range 100 to 1000
+        int16_t  reflectionsLevel;  // in millibels,    range -6000 to 0
+        uint32_t reflectionsDelay;  // in milliseconds, range 0 to 65
+        int16_t  reverbLevel;       // in millibels,    range -6000 to 0
+        uint32_t reverbDelay;       // in milliseconds, range 0 to 65
+        int16_t  diffusion;         // in permilles,    range 0 to 1000
+        int16_t  density;           // in permilles,    range 0 to 1000
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/5.0/IEqualizerEffect.hal b/audio/effect/5.0/IEqualizerEffect.hal
new file mode 100644
index 0000000..c9829f3
--- /dev/null
+++ b/audio/effect/5.0/IEqualizerEffect.hal
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IEqualizerEffect extends IEffect {
+    /**
+     * Gets the number of frequency bands that the equalizer supports.
+     */
+    getNumBands() generates (Result retval, uint16_t numBands);
+
+    /**
+     * Returns the minimum and maximum band levels supported.
+     */
+    getLevelRange()
+            generates (Result retval, int16_t minLevel, int16_t maxLevel);
+
+    /**
+     * Sets the gain for the given equalizer band.
+     */
+    setBandLevel(uint16_t band, int16_t level) generates (Result retval);
+
+    /**
+     * Gets the gain for the given equalizer band.
+     */
+    getBandLevel(uint16_t band) generates (Result retval, int16_t level);
+
+    /**
+     * Gets the center frequency of the given band, in milliHertz.
+     */
+    getBandCenterFrequency(uint16_t band)
+            generates (Result retval, uint32_t centerFreqmHz);
+
+    /**
+     * Gets the frequency range of the given frequency band, in milliHertz.
+     */
+    getBandFrequencyRange(uint16_t band)
+            generates (Result retval, uint32_t minFreqmHz, uint32_t maxFreqmHz);
+
+    /**
+     * Gets the band that has the most effect on the given frequency
+     * in milliHertz.
+     */
+    getBandForFrequency(uint32_t freqmHz)
+            generates (Result retval, uint16_t band);
+
+    /**
+     * Gets the names of all presets the equalizer supports.
+     */
+    getPresetNames() generates (Result retval, vec<string> names);
+
+    /**
+     * Sets the current preset using the index of the preset in the names
+     * vector returned via 'getPresetNames'.
+     */
+    setCurrentPreset(uint16_t preset) generates (Result retval);
+
+    /**
+     * Gets the current preset.
+     */
+    getCurrentPreset() generates (Result retval, uint16_t preset);
+
+    struct AllProperties {
+        uint16_t curPreset;
+        vec<int16_t> bandLevels;
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/5.0/ILoudnessEnhancerEffect.hal b/audio/effect/5.0/ILoudnessEnhancerEffect.hal
new file mode 100644
index 0000000..eaf8949
--- /dev/null
+++ b/audio/effect/5.0/ILoudnessEnhancerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface ILoudnessEnhancerEffect extends IEffect {
+    /**
+     * Sets target gain expressed in millibels.
+     */
+    setTargetGain(int32_t targetGainMb) generates (Result retval);
+
+    /**
+     * Gets target gain expressed in millibels.
+     */
+    getTargetGain() generates (Result retval, int32_t targetGainMb);
+};
diff --git a/audio/effect/5.0/INoiseSuppressionEffect.hal b/audio/effect/5.0/INoiseSuppressionEffect.hal
new file mode 100644
index 0000000..5de794f
--- /dev/null
+++ b/audio/effect/5.0/INoiseSuppressionEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface INoiseSuppressionEffect extends IEffect {
+    enum Level : int32_t {
+        LOW,
+        MEDIUM,
+        HIGH
+    };
+
+    /**
+     * Sets suppression level.
+     */
+    setSuppressionLevel(Level level) generates (Result retval);
+
+    /**
+     * Gets suppression level.
+     */
+    getSuppressionLevel() generates (Result retval, Level level);
+
+    enum Type : int32_t {
+        SINGLE_CHANNEL,
+        MULTI_CHANNEL
+    };
+
+    /**
+     * Set suppression type.
+     */
+    setSuppressionType(Type type) generates (Result retval);
+
+    /**
+     * Get suppression type.
+     */
+    getSuppressionType() generates (Result retval, Type type);
+
+    struct AllProperties {
+        Level level;
+        Type type;
+    };
+
+    /**
+     * Sets all properties at once.
+     */
+    setAllProperties(AllProperties properties) generates (Result retval);
+
+    /**
+     * Gets all properties at once.
+     */
+    getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/5.0/IPresetReverbEffect.hal b/audio/effect/5.0/IPresetReverbEffect.hal
new file mode 100644
index 0000000..af3b3ac
--- /dev/null
+++ b/audio/effect/5.0/IPresetReverbEffect.hal
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IPresetReverbEffect extends IEffect {
+    enum Preset : int32_t {
+        NONE,        // no reverb or reflections
+        SMALLROOM,   // a small room less than five meters in length
+        MEDIUMROOM,  // a medium room with a length of ten meters or less
+        LARGEROOM,   // a large-sized room suitable for live performances
+        MEDIUMHALL,  // a medium-sized hall
+        LARGEHALL,   // a large-sized hall suitable for a full orchestra
+        PLATE,       // synthesis of the traditional plate reverb
+        LAST = PLATE
+    };
+
+    /**
+     * Sets the current preset.
+     */
+    setPreset(Preset preset) generates (Result retval);
+
+    /**
+     * Gets the current preset.
+     */
+    getPreset() generates (Result retval, Preset preset);
+};
diff --git a/audio/effect/5.0/IVirtualizerEffect.hal b/audio/effect/5.0/IVirtualizerEffect.hal
new file mode 100644
index 0000000..9402958
--- /dev/null
+++ b/audio/effect/5.0/IVirtualizerEffect.hal
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IVirtualizerEffect extends IEffect {
+    /**
+     * Returns whether setting virtualization strength is supported.
+     */
+    isStrengthSupported() generates (bool strengthSupported);
+
+    enum StrengthRange : uint16_t {
+        MIN = 0,
+        MAX = 1000
+    };
+
+    /**
+     * Sets virtualization strength.
+     *
+     * @param strength strength of the effect. The valid range for strength
+     *                 strength is [0, 1000], where 0 per mille designates the
+     *                 mildest effect and 1000 per mille designates the
+     *                 strongest.
+     * @return retval operation completion status.
+     */
+    setStrength(uint16_t strength) generates (Result retval);
+
+    /**
+     * Gets virtualization strength.
+     */
+    getStrength() generates (Result retval, uint16_t strength);
+
+    struct SpeakerAngle {
+        /** Speaker channel mask */
+        bitfield<AudioChannelMask> mask;
+        // all angles are expressed in degrees and
+        // are relative to the listener.
+        int16_t azimuth; // 0 is the direction the listener faces
+                         // 180 is behind the listener
+                         // -90 is to their left
+        int16_t elevation; // 0 is the horizontal plane
+                           // +90 is above the listener, -90 is below
+    };
+    /**
+     * Retrieves virtual speaker angles for the given channel mask on the
+     * specified device.
+     */
+    getVirtualSpeakerAngles(bitfield<AudioChannelMask> mask, AudioDevice device)
+            generates (Result retval, vec<SpeakerAngle> speakerAngles);
+
+    /**
+     * Forces the virtualizer effect for the given output device.
+     */
+    forceVirtualizationMode(AudioDevice device) generates (Result retval);
+
+    /**
+     * Returns audio device reflecting the current virtualization mode,
+     * AUDIO_DEVICE_NONE when not virtualizing.
+     */
+    getVirtualizationMode() generates (Result retval, AudioDevice device);
+};
diff --git a/audio/effect/5.0/IVisualizerEffect.hal b/audio/effect/5.0/IVisualizerEffect.hal
new file mode 100644
index 0000000..38752a9
--- /dev/null
+++ b/audio/effect/5.0/IVisualizerEffect.hal
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+import IEffect;
+
+interface IVisualizerEffect extends IEffect {
+    enum CaptureSizeRange : int32_t {
+        MAX = 1024,  // maximum capture size in samples
+        MIN = 128    // minimum capture size in samples
+    };
+
+    /**
+     * Sets the number PCM samples in the capture.
+     */
+    setCaptureSize(uint16_t captureSize) generates (Result retval);
+
+    /**
+     * Gets the number PCM samples in the capture.
+     */
+    getCaptureSize() generates (Result retval, uint16_t captureSize);
+
+    enum ScalingMode : int32_t {
+        // Keep in sync with SCALING_MODE_... in
+        // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+        NORMALIZED = 0,
+        AS_PLAYED = 1
+    };
+
+    /**
+     * Specifies the way the captured data is scaled.
+     */
+    setScalingMode(ScalingMode scalingMode) generates (Result retval);
+
+    /**
+     * Retrieves the way the captured data is scaled.
+     */
+    getScalingMode() generates (Result retval, ScalingMode scalingMode);
+
+    /**
+     * Informs the visualizer about the downstream latency.
+     */
+    setLatency(uint32_t latencyMs) generates (Result retval);
+
+    /**
+     * Gets the downstream latency.
+     */
+    getLatency() generates (Result retval, uint32_t latencyMs);
+
+    enum MeasurementMode : int32_t {
+        // Keep in sync with MEASUREMENT_MODE_... in
+        // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+        NONE = 0x0,
+        PEAK_RMS = 0x1
+    };
+
+    /**
+     * Specifies which measurements are to be made.
+     */
+    setMeasurementMode(MeasurementMode measurementMode)
+            generates (Result retval);
+
+    /**
+     * Retrieves which measurements are to be made.
+     */
+    getMeasurementMode() generates (
+            Result retval, MeasurementMode measurementMode);
+
+    /**
+     * Retrieves the latest PCM snapshot captured by the visualizer engine.  The
+     * number of samples to capture is specified by 'setCaptureSize' parameter.
+     *
+     * @return retval operation completion status.
+     * @return samples samples in 8 bit unsigned format (0 = 0x80)
+     */
+    capture() generates (Result retval, vec<uint8_t> samples);
+
+    struct Measurement {
+        MeasurementMode mode;    // discriminator
+        union Values {
+            struct PeakAndRms {
+                int32_t peakMb;  // millibels
+                int32_t rmsMb;   // millibels
+            } peakAndRms;
+        } value;
+    };
+    /**
+     * Retrieves the latest measurements. The measurements to be made
+     * are specified by 'setMeasurementMode' parameter.
+     *
+     * @return retval operation completion status.
+     * @return result measurement.
+     */
+    measure() generates (Result retval, Measurement result);
+};
diff --git a/audio/effect/5.0/types.hal b/audio/effect/5.0/types.hal
new file mode 100644
index 0000000..84e1108
--- /dev/null
+++ b/audio/effect/5.0/types.hal
@@ -0,0 +1,299 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@5.0;
+
+import android.hardware.audio.common@5.0;
+
+enum Result : int32_t {
+    OK,
+    NOT_INITIALIZED,
+    INVALID_ARGUMENTS,
+    INVALID_STATE,
+    NOT_SUPPORTED,
+    RESULT_TOO_BIG
+};
+
+/**
+ * Effect engine capabilities/requirements flags.
+ *
+ * Definitions for flags field of effect descriptor.
+ *
+ * +----------------+--------+--------------------------------------------------
+ * | description    | bits   | values
+ * +----------------+--------+--------------------------------------------------
+ * | connection     | 0..2   | 0 insert: after track process
+ * | mode           |        | 1 auxiliary: connect to track auxiliary
+ * |                |        |  output and use send level
+ * |                |        | 2 replace: replaces track process function;
+ * |                |        |   must implement SRC, volume and mono to stereo.
+ * |                |        | 3 pre processing: applied below audio HAL on in
+ * |                |        | 4 post processing: applied below audio HAL on out
+ * |                |        | 5 - 7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | insertion      | 3..5   | 0 none
+ * | preference     |        | 1 first of the chain
+ * |                |        | 2 last of the chain
+ * |                |        | 3 exclusive (only effect in the insert chain)
+ * |                |        | 4..7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Volume         | 6..8   | 0 none
+ * | management     |        | 1 implements volume control
+ * |                |        | 2 requires volume indication
+ * |                |        | 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Device         | 9..11  | 0 none
+ * | indication     |        | 1 requires device updates
+ * |                |        | 2, 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Sample input   | 12..13 | 1 direct: process() function or
+ * | mode           |        |   EFFECT_CMD_SET_CONFIG command must specify
+ * |                |        |   a buffer descriptor
+ * |                |        | 2 provider: process() function uses the
+ * |                |        |   bufferProvider indicated by the
+ * |                |        |   EFFECT_CMD_SET_CONFIG command to request input.
+ * |                |        |   buffers.
+ * |                |        | 3 both: both input modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Sample output  | 14..15 | 1 direct: process() function or
+ * | mode           |        |   EFFECT_CMD_SET_CONFIG command must specify
+ * |                |        |   a buffer descriptor
+ * |                |        | 2 provider: process() function uses the
+ * |                |        |   bufferProvider indicated by the
+ * |                |        |   EFFECT_CMD_SET_CONFIG command to request output
+ * |                |        |   buffers.
+ * |                |        | 3 both: both output modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Hardware       | 16..17 | 0 No hardware acceleration
+ * | acceleration   |        | 1 non tunneled hw acceleration: the process()
+ * |                |        |   function reads the samples, send them to HW
+ * |                |        |   accelerated effect processor, reads back
+ * |                |        |   the processed samples and returns them
+ * |                |        |   to the output buffer.
+ * |                |        | 2 tunneled hw acceleration: the process()
+ * |                |        |   function is transparent. The effect interface
+ * |                |        |   is only used to control the effect engine.
+ * |                |        |   This mode is relevant for global effects
+ * |                |        |   actually applied by the audio hardware on
+ * |                |        |   the output stream.
+ * +----------------+--------+--------------------------------------------------
+ * | Audio Mode     | 18..19 | 0 none
+ * | indication     |        | 1 requires audio mode updates
+ * |                |        | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Audio source   | 20..21 | 0 none
+ * | indication     |        | 1 requires audio source updates
+ * |                |        | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Effect offload | 22     | 0 The effect cannot be offloaded to an audio DSP
+ * | supported      |        | 1 The effect can be offloaded to an audio DSP
+ * +----------------+--------+--------------------------------------------------
+ * | Process        | 23     | 0 The effect implements a process function.
+ * | function       |        | 1 The effect does not implement a process
+ * | not            |        |   function: enabling the effect has no impact
+ * | implemented    |        |   on latency or CPU load.
+ * |                |        |   Effect implementations setting this flag do not
+ * |                |        |   have to implement a process function.
+ * +----------------+--------+--------------------------------------------------
+ */
+@export(name="", value_prefix="EFFECT_FLAG_")
+enum EffectFlags : int32_t {
+    // Insert mode
+    TYPE_SHIFT = 0,
+    TYPE_SIZE = 3,
+    TYPE_MASK = ((1 << TYPE_SIZE) -1) << TYPE_SHIFT,
+    TYPE_INSERT = 0 << TYPE_SHIFT,
+    TYPE_AUXILIARY = 1 << TYPE_SHIFT,
+    TYPE_REPLACE = 2 << TYPE_SHIFT,
+    TYPE_PRE_PROC = 3 << TYPE_SHIFT,
+    TYPE_POST_PROC = 4 << TYPE_SHIFT,
+
+    // Insert preference
+    INSERT_SHIFT = TYPE_SHIFT + TYPE_SIZE,
+    INSERT_SIZE = 3,
+    INSERT_MASK = ((1 << INSERT_SIZE) -1) << INSERT_SHIFT,
+    INSERT_ANY = 0 << INSERT_SHIFT,
+    INSERT_FIRST = 1 << INSERT_SHIFT,
+    INSERT_LAST = 2 << INSERT_SHIFT,
+    INSERT_EXCLUSIVE = 3 << INSERT_SHIFT,
+
+    // Volume control
+    VOLUME_SHIFT = INSERT_SHIFT + INSERT_SIZE,
+    VOLUME_SIZE = 3,
+    VOLUME_MASK = ((1 << VOLUME_SIZE) -1) << VOLUME_SHIFT,
+    VOLUME_CTRL = 1 << VOLUME_SHIFT,
+    VOLUME_IND = 2 << VOLUME_SHIFT,
+    VOLUME_NONE = 0 << VOLUME_SHIFT,
+
+    // Device indication
+    DEVICE_SHIFT = VOLUME_SHIFT + VOLUME_SIZE,
+    DEVICE_SIZE = 3,
+    DEVICE_MASK = ((1 << DEVICE_SIZE) -1) << DEVICE_SHIFT,
+    DEVICE_IND = 1 << DEVICE_SHIFT,
+    DEVICE_NONE = 0 << DEVICE_SHIFT,
+
+    // Sample input modes
+    INPUT_SHIFT = DEVICE_SHIFT + DEVICE_SIZE,
+    INPUT_SIZE = 2,
+    INPUT_MASK = ((1 << INPUT_SIZE) -1) << INPUT_SHIFT,
+    INPUT_DIRECT = 1 << INPUT_SHIFT,
+    INPUT_PROVIDER = 2 << INPUT_SHIFT,
+    INPUT_BOTH = 3 << INPUT_SHIFT,
+
+    // Sample output modes
+    OUTPUT_SHIFT = INPUT_SHIFT + INPUT_SIZE,
+    OUTPUT_SIZE = 2,
+    OUTPUT_MASK = ((1 << OUTPUT_SIZE) -1) << OUTPUT_SHIFT,
+    OUTPUT_DIRECT = 1 << OUTPUT_SHIFT,
+    OUTPUT_PROVIDER = 2 << OUTPUT_SHIFT,
+    OUTPUT_BOTH = 3 << OUTPUT_SHIFT,
+
+    // Hardware acceleration mode
+    HW_ACC_SHIFT = OUTPUT_SHIFT + OUTPUT_SIZE,
+    HW_ACC_SIZE = 2,
+    HW_ACC_MASK = ((1 << HW_ACC_SIZE) -1) << HW_ACC_SHIFT,
+    HW_ACC_SIMPLE = 1 << HW_ACC_SHIFT,
+    HW_ACC_TUNNEL = 2 << HW_ACC_SHIFT,
+
+    // Audio mode indication
+    AUDIO_MODE_SHIFT = HW_ACC_SHIFT + HW_ACC_SIZE,
+    AUDIO_MODE_SIZE = 2,
+    AUDIO_MODE_MASK = ((1 << AUDIO_MODE_SIZE) -1) << AUDIO_MODE_SHIFT,
+    AUDIO_MODE_IND = 1 << AUDIO_MODE_SHIFT,
+    AUDIO_MODE_NONE = 0 << AUDIO_MODE_SHIFT,
+
+    // Audio source indication
+    AUDIO_SOURCE_SHIFT = AUDIO_MODE_SHIFT + AUDIO_MODE_SIZE,
+    AUDIO_SOURCE_SIZE = 2,
+    AUDIO_SOURCE_MASK = ((1 << AUDIO_SOURCE_SIZE) -1) << AUDIO_SOURCE_SHIFT,
+    AUDIO_SOURCE_IND = 1 << AUDIO_SOURCE_SHIFT,
+    AUDIO_SOURCE_NONE = 0 << AUDIO_SOURCE_SHIFT,
+
+    // Effect offload indication
+    OFFLOAD_SHIFT = AUDIO_SOURCE_SHIFT + AUDIO_SOURCE_SIZE,
+    OFFLOAD_SIZE = 1,
+    OFFLOAD_MASK = ((1 << OFFLOAD_SIZE) -1) << OFFLOAD_SHIFT,
+    OFFLOAD_SUPPORTED = 1 << OFFLOAD_SHIFT,
+
+    // Effect has no process indication
+    NO_PROCESS_SHIFT = OFFLOAD_SHIFT + OFFLOAD_SIZE,
+    NO_PROCESS_SIZE = 1,
+    NO_PROCESS_MASK = ((1 << NO_PROCESS_SIZE) -1) << NO_PROCESS_SHIFT,
+    NO_PROCESS = 1 << NO_PROCESS_SHIFT
+};
+
+/**
+ * The effect descriptor contains necessary information to facilitate the
+ * enumeration of the effect engines present in a library.
+ */
+struct EffectDescriptor {
+    Uuid type;                   // UUID of to the OpenSL ES interface implemented
+                                 // by this effect
+    Uuid uuid;                   // UUID for this particular implementation
+    bitfield<EffectFlags> flags; // effect engine capabilities/requirements flags
+    uint16_t cpuLoad;            // CPU load indication expressed in 0.1 MIPS units
+                                 // as estimated on an ARM9E core (ARMv5TE) with 0 WS
+    uint16_t memoryUsage;        // data memory usage expressed in KB and includes
+                                 // only dynamically allocated memory
+    uint8_t[64] name;            // human readable effect name
+    uint8_t[64] implementor;     // human readable effect implementor name
+};
+
+/**
+ * A buffer is a chunk of audio data for processing.  Multi-channel audio is
+ * always interleaved. The channel order is from LSB to MSB with regard to the
+ * channel mask definition in audio.h, audio_channel_mask_t, e.g.:
+ * Stereo: L, R; 5.1: FL, FR, FC, LFE, BL, BR.
+ *
+ * The buffer size is expressed in frame count, a frame being composed of
+ * samples for all channels at a given time. Frame size for unspecified format
+ * (AUDIO_FORMAT_OTHER) is 8 bit by definition.
+ */
+struct AudioBuffer {
+    uint64_t id;
+    uint32_t frameCount;
+    memory data;
+};
+
+@export(name="effect_buffer_access_e", value_prefix="EFFECT_BUFFER_")
+enum EffectBufferAccess : int32_t {
+    ACCESS_WRITE,
+    ACCESS_READ,
+    ACCESS_ACCUMULATE
+};
+
+/**
+ * Determines what fields of EffectBufferConfig need to be considered.
+ */
+@export(name="", value_prefix="EFFECT_CONFIG_")
+enum EffectConfigParameters : int32_t {
+    BUFFER = 0x0001,    // buffer field
+    SMP_RATE = 0x0002,  // samplingRate
+    CHANNELS = 0x0004,  // channels
+    FORMAT = 0x0008,    // format
+    ACC_MODE = 0x0010,  // accessMode
+    // Note that the 2.0 ALL have been moved to an helper function
+};
+
+/**
+ * The buffer config structure specifies the input or output audio format
+ * to be used by the effect engine.
+ */
+struct EffectBufferConfig {
+    AudioBuffer buffer;
+    uint32_t samplingRateHz;
+    bitfield<AudioChannelMask> channels;
+    AudioFormat format;
+    EffectBufferAccess accessMode;
+    bitfield<EffectConfigParameters> mask;
+};
+
+struct EffectConfig {
+    EffectBufferConfig inputCfg;
+    EffectBufferConfig outputCfg;
+};
+
+@export(name="effect_feature_e", value_prefix="EFFECT_FEATURE_")
+enum EffectFeature : int32_t {
+    AUX_CHANNELS, // supports auxiliary channels
+                  // (e.g. dual mic noise suppressor)
+    CNT
+};
+
+struct EffectAuxChannelsConfig {
+    bitfield<AudioChannelMask> mainChannels;  // channel mask for main channels
+    bitfield<AudioChannelMask> auxChannels;   // channel mask for auxiliary channels
+};
+
+struct EffectOffloadParameter {
+    bool isOffload;          // true if the playback thread the effect
+                             // is attached to is offloaded
+    AudioIoHandle ioHandle;  // io handle of the playback thread
+                             // the effect is attached to
+};
+
+/**
+ * The message queue flags used to synchronize reads and writes from
+ * the status message queue used by effects.
+ */
+enum MessageQueueFlagBits : uint32_t {
+    DONE_PROCESSING = 1 << 0,
+    REQUEST_PROCESS = 1 << 1,
+    REQUEST_PROCESS_REVERSE = 1 << 2,
+    REQUEST_QUIT = 1 << 3,
+    REQUEST_PROCESS_ALL =
+        REQUEST_PROCESS | REQUEST_PROCESS_REVERSE | REQUEST_QUIT
+};
diff --git a/audio/effect/5.0/xml/audio_effects_conf.xsd b/audio/effect/5.0/xml/audio_effects_conf.xsd
new file mode 120000
index 0000000..9d85fa7
--- /dev/null
+++ b/audio/effect/5.0/xml/audio_effects_conf.xsd
@@ -0,0 +1 @@
+../../2.0/xml/audio_effects_conf.xsd
\ No newline at end of file
diff --git a/audio/effect/all-versions/default/include/effect/all-versions/default/EffectsFactory.impl.h b/audio/effect/all-versions/default/include/effect/all-versions/default/EffectsFactory.impl.h
index 1882a2c..b0351c9 100644
--- a/audio/effect/all-versions/default/include/effect/all-versions/default/EffectsFactory.impl.h
+++ b/audio/effect/all-versions/default/include/effect/all-versions/default/EffectsFactory.impl.h
@@ -101,6 +101,7 @@
                 case -ENOENT: {
                     // No more effects available.
                     result.resize(i);
+                    break;
                 }
                 default: {
                     result.resize(0);
diff --git a/authsecret/1.0/vts/functional/Android.bp b/authsecret/1.0/vts/functional/Android.bp
index de9f560..f2b3a8a 100644
--- a/authsecret/1.0/vts/functional/Android.bp
+++ b/authsecret/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalAuthSecretV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.authsecret@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/automotive/audiocontrol/1.0/vts/functional/Android.bp b/automotive/audiocontrol/1.0/vts/functional/Android.bp
index c6e0d8e..3cb6340 100644
--- a/automotive/audiocontrol/1.0/vts/functional/Android.bp
+++ b/automotive/audiocontrol/1.0/vts/functional/Android.bp
@@ -16,16 +16,14 @@
 
 cc_test {
     name: "VtsHalAudioControlV1_0TargetTest",
-
     srcs: [
         "VtsHalAudioControlV1_0TargetTest.cpp",
     ],
-
     defaults: [
         "VtsHalTargetTestDefaults",
     ],
-
     static_libs: [
         "android.hardware.automotive.audiocontrol@1.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/automotive/audiocontrol/1.0/vts/functional/VtsHalAudioControlV1_0TargetTest.cpp b/automotive/audiocontrol/1.0/vts/functional/VtsHalAudioControlV1_0TargetTest.cpp
index 68ed778..fc0deb9 100644
--- a/automotive/audiocontrol/1.0/vts/functional/VtsHalAudioControlV1_0TargetTest.cpp
+++ b/automotive/audiocontrol/1.0/vts/functional/VtsHalAudioControlV1_0TargetTest.cpp
@@ -34,7 +34,7 @@
 using namespace ::android::hardware::automotive::audiocontrol::V1_0;
 using ::android::hardware::Return;
 using ::android::hardware::Void;
-using ::android::hardware::hidl_enum_iterator;
+using ::android::hardware::hidl_enum_range;
 using ::android::hardware::hidl_handle;
 using ::android::hardware::hidl_string;
 using ::android::hardware::hidl_vec;
@@ -132,7 +132,7 @@
     int bus = -1;
 
     // For each defined context, query the driver for the BUS on which it should be delivered
-    for (const auto& ctxt : hidl_enum_iterator<ContextNumber>()) {
+    for (const auto& ctxt : hidl_enum_range<ContextNumber>()) {
          bus = pAudioControl->getBusForContext(ctxt);
 
          if (ctxt == ContextNumber::INVALID) {
@@ -147,8 +147,8 @@
     }
 
     // Try asking about an invalid context one beyond the last defined to see that it gets back a -1
-    int contextRange = std::distance(hidl_enum_iterator<ContextNumber>().begin(),
-                                     hidl_enum_iterator<ContextNumber>().end());
+    int contextRange = std::distance(hidl_enum_range<ContextNumber>().begin(),
+                                     hidl_enum_range<ContextNumber>().end());
     bus = pAudioControl->getBusForContext((ContextNumber)contextRange);
     EXPECT_EQ(bus, -1);
 
diff --git a/automotive/evs/1.0/Android.bp b/automotive/evs/1.0/Android.bp
index 4bc4068..f620eb5 100644
--- a/automotive/evs/1.0/Android.bp
+++ b/automotive/evs/1.0/Android.bp
@@ -23,6 +23,6 @@
         "DisplayState",
         "EvsResult",
     ],
-    gen_java: false,
+    gen_java: true,
 }
 
diff --git a/automotive/evs/1.0/vts/functional/Android.bp b/automotive/evs/1.0/vts/functional/Android.bp
index 6ac2458..2ef33fd 100644
--- a/automotive/evs/1.0/vts/functional/Android.bp
+++ b/automotive/evs/1.0/vts/functional/Android.bp
@@ -16,28 +16,17 @@
 
 cc_test {
     name: "VtsHalEvsV1_0TargetTest",
-
     srcs: [
         "VtsHalEvsV1_0TargetTest.cpp",
         "FrameHandler.cpp",
         "FormatConvert.cpp"
     ],
-
-    defaults: [
-        "hidl_defaults",
-    ],
-
+    defaults: ["VtsHalTargetTestDefaults"],
     shared_libs: [
-        "android.hardware.automotive.evs@1.0",
-        "liblog",
-        "libutils",
         "libui",
-        "libhidlbase",
-        "libhidltransport",
     ],
-
-    static_libs: ["VtsHalHidlTargetTestBase"],
-
+    static_libs: ["android.hardware.automotive.evs@1.0"],
+    test_suites: ["general-tests"],
     cflags: [
         "-O0",
         "-g",
diff --git a/automotive/vehicle/2.0/default/Android.bp b/automotive/vehicle/2.0/default/Android.bp
index 22ab079..62a39df 100644
--- a/automotive/vehicle/2.0/default/Android.bp
+++ b/automotive/vehicle/2.0/default/Android.bp
@@ -93,6 +93,7 @@
         "tests/VmsUtils_test.cpp",
     ],
     header_libs: ["libbase_headers"],
+    test_suites: ["general-tests"],
 }
 
 cc_binary {
diff --git a/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp b/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp
index b5de262..393d3ec 100644
--- a/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp
+++ b/automotive/vehicle/2.0/default/common/src/VehicleHalManager.cpp
@@ -218,7 +218,7 @@
     const auto& clients =
         mSubscriptionManager.getSubscribedClients(property, SubscribeFlags::EVENTS_FROM_CAR);
 
-    for (auto client : clients) {
+    for (const auto& client : clients) {
         client->getCallback()->onPropertySetError(errorCode, property, areaId);
     }
 }
@@ -312,7 +312,7 @@
 void VehicleHalManager::handlePropertySetEvent(const VehiclePropValue& value) {
     auto clients =
         mSubscriptionManager.getSubscribedClients(value.prop, SubscribeFlags::EVENTS_FROM_ANDROID);
-    for (auto client : clients) {
+    for (const auto& client : clients) {
         client->getCallback()->onPropertySet(value);
     }
 }
diff --git a/automotive/vehicle/2.0/default/tests/SubscriptionManager_test.cpp b/automotive/vehicle/2.0/default/tests/SubscriptionManager_test.cpp
index ab2013d..23ab6bc 100644
--- a/automotive/vehicle/2.0/default/tests/SubscriptionManager_test.cpp
+++ b/automotive/vehicle/2.0/default/tests/SubscriptionManager_test.cpp
@@ -66,7 +66,7 @@
     static std::list<sp<IVehicleCallback>> extractCallbacks(
             const std::list<sp<HalClient>>& clients) {
         std::list<sp<IVehicleCallback>> callbacks;
-        for (auto c : clients) {
+        for (const auto& c : clients) {
             callbacks.push_back(c->getCallback());
         }
         return callbacks;
diff --git a/biometrics/fingerprint/2.1/vts/functional/Android.bp b/biometrics/fingerprint/2.1/vts/functional/Android.bp
index bee3657..60228f2 100644
--- a/biometrics/fingerprint/2.1/vts/functional/Android.bp
+++ b/biometrics/fingerprint/2.1/vts/functional/Android.bp
@@ -19,5 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalBiometricsFingerprintV2_1TargetTest.cpp"],
     static_libs: ["android.hardware.biometrics.fingerprint@2.1"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/biometrics/fingerprint/2.1/vts/functional/VtsHalBiometricsFingerprintV2_1TargetTest.cpp b/biometrics/fingerprint/2.1/vts/functional/VtsHalBiometricsFingerprintV2_1TargetTest.cpp
index 9911038..d577ce4 100644
--- a/biometrics/fingerprint/2.1/vts/functional/VtsHalBiometricsFingerprintV2_1TargetTest.cpp
+++ b/biometrics/fingerprint/2.1/vts/functional/VtsHalBiometricsFingerprintV2_1TargetTest.cpp
@@ -24,6 +24,7 @@
 #include <android/hardware/biometrics/fingerprint/2.1/IBiometricsFingerprintClientCallback.h>
 #include <hidl/HidlSupport.h>
 #include <hidl/HidlTransportSupport.h>
+#include <utils/Condition.h>
 
 #include <cinttypes>
 #include <future>
diff --git a/bluetooth/.clang-format b/bluetooth/.clang-format
new file mode 100644
index 0000000..9564994
--- /dev/null
+++ b/bluetooth/.clang-format
@@ -0,0 +1,20 @@
+#
+# Copyright 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+BasedOnStyle: Google
+CommentPragmas: NOLINT:.*
+DerivePointerAlignment: false
+
diff --git a/bluetooth/1.0/default/Android.bp b/bluetooth/1.0/default/Android.bp
index 48bbadf..f4b1e7b 100644
--- a/bluetooth/1.0/default/Android.bp
+++ b/bluetooth/1.0/default/Android.bp
@@ -94,6 +94,7 @@
         "android.hardware.bluetooth-hci",
         "libgmock",
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test_host {
diff --git a/bluetooth/1.0/default/android.hardware.bluetooth@1.0-service.rc b/bluetooth/1.0/default/android.hardware.bluetooth@1.0-service.rc
index a634441..b615227 100644
--- a/bluetooth/1.0/default/android.hardware.bluetooth@1.0-service.rc
+++ b/bluetooth/1.0/default/android.hardware.bluetooth@1.0-service.rc
@@ -5,11 +5,3 @@
     group bluetooth
     writepid /dev/stune/foreground/tasks
 
-on property:vts.native_server.on=1 && property:ro.build.type=userdebug
-    stop vendor.bluetooth-1-0
-on property:vts.native_server.on=1 && property:ro.build.type=eng
-    stop vendor.bluetooth-1-0
-on property:vts.native_server.on=0 && property:ro.build.type=userdebug
-    start vendor.bluetooth-1-0
-on property:vts.native_server.on=0 && property:ro.build.type=eng
-    start vendor.bluetooth-1-0
diff --git a/bluetooth/1.0/default/async_fd_watcher.cc b/bluetooth/1.0/default/async_fd_watcher.cc
index 7c74643..18098ca 100644
--- a/bluetooth/1.0/default/async_fd_watcher.cc
+++ b/bluetooth/1.0/default/async_fd_watcher.cc
@@ -18,13 +18,13 @@
 
 #include "async_fd_watcher.h"
 
+#include <log/log.h>
 #include <algorithm>
 #include <atomic>
 #include <condition_variable>
 #include <map>
 #include <mutex>
 #include <thread>
-#include <log/log.h>
 #include <vector>
 #include "fcntl.h"
 #include "sys/select.h"
@@ -159,11 +159,9 @@
       TimeoutCallback saved_cb;
       {
         std::unique_lock<std::mutex> guard(timeout_mutex_);
-        if (timeout_ms_ > std::chrono::milliseconds(0))
-          saved_cb = timeout_cb_;
+        if (timeout_ms_ > std::chrono::milliseconds(0)) saved_cb = timeout_cb_;
       }
-      if (saved_cb != nullptr)
-        saved_cb();
+      if (saved_cb != nullptr) saved_cb();
       continue;
     }
 
@@ -180,14 +178,14 @@
       std::unique_lock<std::mutex> guard(internal_mutex_);
       for (auto& it : watched_fds_) {
         if (FD_ISSET(it.first, &read_fds)) {
-        it.second(it.first);
+          it.second(it.first);
         }
       }
     }
   }
 }
 
-} // namespace async
-} // namespace bluetooth
-} // namespace hardware
-} // namespace android
+}  // namespace async
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android
diff --git a/bluetooth/1.0/default/async_fd_watcher.h b/bluetooth/1.0/default/async_fd_watcher.h
index 358cbc3..b51f921 100644
--- a/bluetooth/1.0/default/async_fd_watcher.h
+++ b/bluetooth/1.0/default/async_fd_watcher.h
@@ -60,8 +60,7 @@
   std::chrono::milliseconds timeout_ms_;
 };
 
-
-} // namespace async
-} // namespace bluetooth
-} // namespace hardware
-} // namespace android
+}  // namespace async
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android
diff --git a/bluetooth/1.0/default/bluetooth_address.h b/bluetooth/1.0/default/bluetooth_address.h
index 94bf616..010a113 100644
--- a/bluetooth/1.0/default/bluetooth_address.h
+++ b/bluetooth/1.0/default/bluetooth_address.h
@@ -54,8 +54,8 @@
   static bool get_local_address(uint8_t* addr);
 };
 
-} // namespace implementation
-} // namespace V1_0
-} // namespace bluetooth
-} // namespace hardware
-} // namespace android
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android
diff --git a/bluetooth/1.0/default/bluetooth_hci.h b/bluetooth/1.0/default/bluetooth_hci.h
index e2797b1..c966990 100644
--- a/bluetooth/1.0/default/bluetooth_hci.h
+++ b/bluetooth/1.0/default/bluetooth_hci.h
@@ -29,8 +29,8 @@
 namespace V1_0 {
 namespace implementation {
 
-using ::android::hardware::Return;
 using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
 
 class BluetoothDeathRecipient;
 
diff --git a/bluetooth/1.0/default/bt_vendor_lib.h b/bluetooth/1.0/default/bt_vendor_lib.h
index c140e52..c4035b7 100644
--- a/bluetooth/1.0/default/bt_vendor_lib.h
+++ b/bluetooth/1.0/default/bt_vendor_lib.h
@@ -418,13 +418,12 @@
 // DIRECTORIES.
 // ONLY USED INSIDE transmit_cb.
 // DO NOT USE IN NEW HAL IMPLEMENTATIONS GOING FORWARD
-typedef struct
-{
-    uint16_t          event;
-    uint16_t          len;
-    uint16_t          offset;
-    uint16_t          layer_specific;
-    uint8_t           data[];
+typedef struct {
+  uint16_t event;
+  uint16_t len;
+  uint16_t offset;
+  uint16_t layer_specific;
+  uint8_t data[];
 } HC_BT_HDR;
 // /MODIFICATION
 
diff --git a/bluetooth/1.0/default/h4_protocol.cc b/bluetooth/1.0/default/h4_protocol.cc
index df40507..98e3273 100644
--- a/bluetooth/1.0/default/h4_protocol.cc
+++ b/bluetooth/1.0/default/h4_protocol.cc
@@ -34,7 +34,8 @@
                         {const_cast<uint8_t*>(data), length}};
   ssize_t ret = 0;
   do {
-    ret = TEMP_FAILURE_RETRY(writev(uart_fd_, iov, sizeof(iov) / sizeof(iov[0])));
+    ret =
+        TEMP_FAILURE_RETRY(writev(uart_fd_, iov, sizeof(iov) / sizeof(iov[0])));
   } while (-1 == ret && EAGAIN == errno);
 
   if (ret == -1) {
diff --git a/bluetooth/1.0/default/hci_packetizer.cc b/bluetooth/1.0/default/hci_packetizer.cc
index 71f4328..7cb3a11 100644
--- a/bluetooth/1.0/default/hci_packetizer.cc
+++ b/bluetooth/1.0/default/hci_packetizer.cc
@@ -46,9 +46,7 @@
 namespace bluetooth {
 namespace hci {
 
-const hidl_vec<uint8_t>& HciPacketizer::GetPacket() const {
-  return packet_;
-}
+const hidl_vec<uint8_t>& HciPacketizer::GetPacket() const { return packet_; }
 
 void HciPacketizer::OnDataReady(int fd, HciPacketType packet_type) {
   switch (state_) {
diff --git a/bluetooth/1.0/default/hci_protocol.cc b/bluetooth/1.0/default/hci_protocol.cc
index bf94dfe..7e88dc4 100644
--- a/bluetooth/1.0/default/hci_protocol.cc
+++ b/bluetooth/1.0/default/hci_protocol.cc
@@ -20,8 +20,8 @@
 #include <assert.h>
 #include <errno.h>
 #include <fcntl.h>
-#include <unistd.h>
 #include <log/log.h>
+#include <unistd.h>
 
 namespace android {
 namespace hardware {
diff --git a/bluetooth/1.0/default/service.cpp b/bluetooth/1.0/default/service.cpp
index 3a7aad0..dd3f6a9 100644
--- a/bluetooth/1.0/default/service.cpp
+++ b/bluetooth/1.0/default/service.cpp
@@ -24,9 +24,9 @@
 static const size_t kMaxThreads = 5;
 
 // Generated HIDL files
-using android::hardware::bluetooth::V1_0::IBluetoothHci;
 using android::hardware::defaultPassthroughServiceImplementation;
+using android::hardware::bluetooth::V1_0::IBluetoothHci;
 
 int main() {
-    return defaultPassthroughServiceImplementation<IBluetoothHci>(kMaxThreads);
+  return defaultPassthroughServiceImplementation<IBluetoothHci>(kMaxThreads);
 }
diff --git a/bluetooth/1.0/default/test/async_fd_watcher_unittest.cc b/bluetooth/1.0/default/test/async_fd_watcher_unittest.cc
index ee7d8d1..07d8d54 100644
--- a/bluetooth/1.0/default/test/async_fd_watcher_unittest.cc
+++ b/bluetooth/1.0/default/test/async_fd_watcher_unittest.cc
@@ -252,13 +252,13 @@
   });
 
   // Set a timeout flag in each callback.
-  conn_watcher.ConfigureTimeout(
-      std::chrono::milliseconds(500),
-      [&conn_watcher, &timed_out, &timed_out2]() {
-        timed_out = true;
-        conn_watcher.ConfigureTimeout(std::chrono::seconds(1),
+  conn_watcher.ConfigureTimeout(std::chrono::milliseconds(500),
+                                [&conn_watcher, &timed_out, &timed_out2]() {
+                                  timed_out = true;
+                                  conn_watcher.ConfigureTimeout(
+                                      std::chrono::seconds(1),
                                       [&timed_out2]() { timed_out2 = true; });
-      });
+                                });
   EXPECT_FALSE(timed_out);
   EXPECT_FALSE(timed_out2);
   sleep(1);
@@ -385,8 +385,8 @@
   CleanUpServer();
 }
 
-} // namespace implementation
-} // namespace V1_0
-} // namespace bluetooth
-} // namespace hardware
-} // namespace android
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android
diff --git a/bluetooth/1.0/default/test/h4_protocol_unittest.cc b/bluetooth/1.0/default/test/h4_protocol_unittest.cc
index ad08086..ba56c0d 100644
--- a/bluetooth/1.0/default/test/h4_protocol_unittest.cc
+++ b/bluetooth/1.0/default/test/h4_protocol_unittest.cc
@@ -36,8 +36,8 @@
 namespace V1_0 {
 namespace implementation {
 
-using ::testing::Eq;
 using hci::H4Protocol;
+using ::testing::Eq;
 
 static char sample_data1[100] = "A point is that which has no part.";
 static char sample_data2[100] = "A line is breadthless length.";
diff --git a/bluetooth/1.0/default/test/mct_protocol_unittest.cc b/bluetooth/1.0/default/test/mct_protocol_unittest.cc
index d45058e..60dbc88 100644
--- a/bluetooth/1.0/default/test/mct_protocol_unittest.cc
+++ b/bluetooth/1.0/default/test/mct_protocol_unittest.cc
@@ -36,8 +36,8 @@
 namespace V1_0 {
 namespace implementation {
 
-using ::testing::Eq;
 using hci::MctProtocol;
+using ::testing::Eq;
 
 static char sample_data1[100] = "A point is that which has no part.";
 static char sample_data2[100] = "A line is breadthless length.";
diff --git a/bluetooth/1.0/default/test/properties.cc b/bluetooth/1.0/default/test/properties.cc
index 6ac4fb4..70de01e 100644
--- a/bluetooth/1.0/default/test/properties.cc
+++ b/bluetooth/1.0/default/test/properties.cc
@@ -36,7 +36,7 @@
 struct property properties[MAX_PROPERTIES];
 
 // Find the correct entry.
-static int property_find(const char *key) {
+static int property_find(const char* key) {
   for (int i = 0; i < num_properties; i++) {
     if (strncmp(properties[i].key, key, PROP_KEY_MAX) == 0) {
       return i;
@@ -45,7 +45,7 @@
   return MAX_PROPERTIES;
 }
 
-int property_set(const char *key, const char *value) {
+int property_set(const char* key, const char* value) {
   if (strnlen(value, PROP_VALUE_MAX) > PROP_VALUE_MAX) return -1;
 
   // Check to see if the property exists.
@@ -63,7 +63,7 @@
   return 0;
 }
 
-int property_get(const char *key, char *value, const char *default_value) {
+int property_get(const char* key, char* value, const char* default_value) {
   // This doesn't mock the behavior of default value
   if (default_value != NULL) ALOGE("%s: default_value is ignored!", __func__);
 
diff --git a/bluetooth/1.0/default/vendor_interface.cc b/bluetooth/1.0/default/vendor_interface.cc
index a8f5bb4..d56e344 100644
--- a/bluetooth/1.0/default/vendor_interface.cc
+++ b/bluetooth/1.0/default/vendor_interface.cc
@@ -35,8 +35,8 @@
 
 namespace {
 
-using android::hardware::bluetooth::V1_0::implementation::VendorInterface;
 using android::hardware::hidl_vec;
+using android::hardware::bluetooth::V1_0::implementation::VendorInterface;
 
 struct {
   tINT_CMD_CBACK cb;
@@ -258,8 +258,7 @@
     fd_watcher_.WatchFdForNonBlockingReads(
         fd_list[CH_EVT], [mct_hci](int fd) { mct_hci->OnEventDataReady(fd); });
     fd_watcher_.WatchFdForNonBlockingReads(
-        fd_list[CH_ACL_IN],
-        [mct_hci](int fd) { mct_hci->OnAclDataReady(fd); });
+        fd_list[CH_ACL_IN], [mct_hci](int fd) { mct_hci->OnAclDataReady(fd); });
     hci_ = mct_hci;
   }
 
@@ -295,6 +294,7 @@
     lib_interface_->op(BT_VND_OP_POWER_CTRL, &power_state);
 
     lib_interface_->cleanup();
+    lib_interface_ = nullptr;
   }
 
   if (lib_handle_ != nullptr) {
diff --git a/bluetooth/1.0/default/vendor_interface.h b/bluetooth/1.0/default/vendor_interface.h
index a401ee6..1d69040 100644
--- a/bluetooth/1.0/default/vendor_interface.h
+++ b/bluetooth/1.0/default/vendor_interface.h
@@ -40,9 +40,9 @@
                          PacketReadCallback event_cb, PacketReadCallback acl_cb,
                          PacketReadCallback sco_cb);
   static void Shutdown();
-  static VendorInterface *get();
+  static VendorInterface* get();
 
-  size_t Send(uint8_t type, const uint8_t *data, size_t length);
+  size_t Send(uint8_t type, const uint8_t* data, size_t length);
 
   void OnFirmwareConfigured(uint8_t result);
 
@@ -58,15 +58,15 @@
 
   void HandleIncomingEvent(const hidl_vec<uint8_t>& hci_packet);
 
-  void *lib_handle_;
-  bt_vendor_interface_t *lib_interface_;
+  void* lib_handle_ = nullptr;
+  bt_vendor_interface_t* lib_interface_ = nullptr;
   async::AsyncFdWatcher fd_watcher_;
   InitializeCompleteCallback initialize_complete_cb_;
-  hci::HciProtocol* hci_;
+  hci::HciProtocol* hci_ = nullptr;
 
   PacketReadCallback event_cb_;
 
-  FirmwareStartupTimer *firmware_startup_timer_;
+  FirmwareStartupTimer* firmware_startup_timer_ = nullptr;
 };
 
 }  // namespace implementation
diff --git a/bluetooth/1.0/vts/OWNERS b/bluetooth/1.0/vts/OWNERS
new file mode 100644
index 0000000..58d3a66
--- /dev/null
+++ b/bluetooth/1.0/vts/OWNERS
@@ -0,0 +1,8 @@
+zachoverflow@google.com
+siyuanh@google.com
+mylesgw@google.com
+jpawlowski@google.com
+apanicke@google.com
+stng@google.com
+hsz@google.com
+
diff --git a/bluetooth/1.0/vts/functional/Android.bp b/bluetooth/1.0/vts/functional/Android.bp
index 2e60588..54039e5 100644
--- a/bluetooth/1.0/vts/functional/Android.bp
+++ b/bluetooth/1.0/vts/functional/Android.bp
@@ -22,4 +22,5 @@
         "android.hardware.bluetooth@1.0",
         "libbluetooth-types",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/bluetooth/1.0/vts/functional/VtsHalBluetoothV1_0TargetTest.cpp b/bluetooth/1.0/vts/functional/VtsHalBluetoothV1_0TargetTest.cpp
index bf8b547..90fbb3f 100644
--- a/bluetooth/1.0/vts/functional/VtsHalBluetoothV1_0TargetTest.cpp
+++ b/bluetooth/1.0/vts/functional/VtsHalBluetoothV1_0TargetTest.cpp
@@ -26,15 +26,19 @@
 #include <VtsHalHidlTargetCallbackBase.h>
 #include <VtsHalHidlTargetTestBase.h>
 #include <VtsHalHidlTargetTestEnvBase.h>
-#include <queue>
 
-using ::android::hardware::bluetooth::V1_0::IBluetoothHci;
-using ::android::hardware::bluetooth::V1_0::IBluetoothHciCallbacks;
-using ::android::hardware::bluetooth::V1_0::Status;
+#include <chrono>
+#include <queue>
+#include <thread>
+
+using ::android::sp;
+using ::android::hardware::hidl_death_recipient;
 using ::android::hardware::hidl_vec;
 using ::android::hardware::Return;
 using ::android::hardware::Void;
-using ::android::sp;
+using ::android::hardware::bluetooth::V1_0::IBluetoothHci;
+using ::android::hardware::bluetooth::V1_0::IBluetoothHciCallbacks;
+using ::android::hardware::bluetooth::V1_0::Status;
 
 #define HCI_MINIMUM_HCI_VERSION 5  // Bluetooth Core Specification 3.0 + HS
 #define HCI_MINIMUM_LMP_VERSION 5  // Bluetooth Core Specification 3.0 + HS
@@ -45,6 +49,7 @@
 #define WAIT_FOR_HCI_EVENT_TIMEOUT std::chrono::milliseconds(2000)
 #define WAIT_FOR_SCO_DATA_TIMEOUT std::chrono::milliseconds(1000)
 #define WAIT_FOR_ACL_DATA_TIMEOUT std::chrono::milliseconds(1000)
+#define INTERFACE_CLOSE_DELAY_MS std::chrono::milliseconds(200)
 
 #define COMMAND_HCI_SHOULD_BE_UNKNOWN \
   { 0xff, 0x3B, 0x08, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 }
@@ -157,6 +162,11 @@
     ALOGI("%s: getService() for bluetooth is %s", __func__,
           bluetooth->isRemote() ? "remote" : "local");
 
+    bluetooth_hci_death_recipient = new BluetoothHciDeathRecipient();
+    ASSERT_NE(bluetooth_hci_death_recipient, nullptr);
+    ASSERT_TRUE(
+        bluetooth->linkToDeath(bluetooth_hci_death_recipient, 0).isOk());
+
     bluetooth_cb = new BluetoothHciCallbacks(*this);
     ASSERT_NE(bluetooth_cb, nullptr);
 
@@ -170,8 +180,9 @@
     acl_cb_count = 0;
     sco_cb_count = 0;
 
-    ASSERT_EQ(initialized, false);
-    bluetooth->initialize(bluetooth_cb);
+    ASSERT_FALSE(initialized);
+    // Should not be checked in production code
+    ASSERT_TRUE(bluetooth->initialize(bluetooth_cb).isOk());
 
     bluetooth_cb->SetWaitTimeout(kCallbackNameInitializationComplete,
                                  WAIT_FOR_INIT_TIMEOUT);
@@ -186,11 +197,14 @@
         bluetooth_cb->WaitForCallback(kCallbackNameInitializationComplete)
             .no_timeout);
 
-    ASSERT_EQ(initialized, true);
+    ASSERT_TRUE(initialized);
   }
 
   virtual void TearDown() override {
-    bluetooth->close();
+    ALOGI("TearDown");
+    // Should not be checked in production code
+    ASSERT_TRUE(bluetooth->close().isOk());
+    std::this_thread::sleep_for(INTERFACE_CLOSE_DELAY_MS);
     handle_no_ops();
     EXPECT_EQ(static_cast<size_t>(0), event_queue.size());
     EXPECT_EQ(static_cast<size_t>(0), sco_queue.size());
@@ -212,6 +226,16 @@
   void wait_for_command_complete_event(hidl_vec<uint8_t> cmd);
   int wait_for_completed_packets_event(uint16_t handle);
 
+  class BluetoothHciDeathRecipient : public hidl_death_recipient {
+   public:
+    void serviceDied(
+        uint64_t /*cookie*/,
+        const android::wp<::android::hidl::base::V1_0::IBase>& /*who*/)
+        override {
+      FAIL();
+    }
+  };
+
   // A simple test implementation of BluetoothHciCallbacks.
   class BluetoothHciCallbacks
       : public ::testing::VtsHalHidlTargetCallbackBase<BluetoothHidlTest>,
@@ -258,6 +282,7 @@
 
   sp<IBluetoothHci> bluetooth;
   sp<BluetoothHciCallbacks> bluetooth_cb;
+  sp<BluetoothHciDeathRecipient> bluetooth_hci_death_recipient;
   std::queue<hidl_vec<uint8_t>> event_queue;
   std::queue<hidl_vec<uint8_t>> acl_queue;
   std::queue<hidl_vec<uint8_t>> sco_queue;
@@ -290,7 +315,7 @@
     if (event_is_no_op) {
       event_queue.pop();
     } else {
-      return;
+      break;
     }
   }
 }
@@ -657,10 +682,11 @@
     EXPECT_LT(0, max_sco_data_packet_length);
     sendAndCheckSCO(1, max_sco_data_packet_length, sco_connection_handles[0]);
     int sco_packets_sent = 1;
-    int completed_packets = wait_for_completed_packets_event(sco_connection_handles[0]);
+    int completed_packets =
+        wait_for_completed_packets_event(sco_connection_handles[0]);
     if (sco_packets_sent != completed_packets) {
-        ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, sco_packets_sent,
-              completed_packets);
+      ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__,
+            sco_packets_sent, completed_packets);
     }
   }
 
@@ -668,10 +694,11 @@
     EXPECT_LT(0, max_acl_data_packet_length);
     sendAndCheckACL(1, max_acl_data_packet_length, acl_connection_handles[0]);
     int acl_packets_sent = 1;
-    int completed_packets = wait_for_completed_packets_event(acl_connection_handles[0]);
+    int completed_packets =
+        wait_for_completed_packets_event(acl_connection_handles[0]);
     if (acl_packets_sent != completed_packets) {
-        ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, acl_packets_sent,
-              completed_packets);
+      ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__,
+            acl_packets_sent, completed_packets);
     }
   }
 }
@@ -693,10 +720,11 @@
     sendAndCheckSCO(NUM_SCO_PACKETS_BANDWIDTH, max_sco_data_packet_length,
                     sco_connection_handles[0]);
     int sco_packets_sent = NUM_SCO_PACKETS_BANDWIDTH;
-    int completed_packets = wait_for_completed_packets_event(sco_connection_handles[0]);
+    int completed_packets =
+        wait_for_completed_packets_event(sco_connection_handles[0]);
     if (sco_packets_sent != completed_packets) {
-        ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, sco_packets_sent,
-              completed_packets);
+      ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__,
+            sco_packets_sent, completed_packets);
     }
   }
 
@@ -705,10 +733,11 @@
     sendAndCheckACL(NUM_ACL_PACKETS_BANDWIDTH, max_acl_data_packet_length,
                     acl_connection_handles[0]);
     int acl_packets_sent = NUM_ACL_PACKETS_BANDWIDTH;
-    int completed_packets = wait_for_completed_packets_event(acl_connection_handles[0]);
+    int completed_packets =
+        wait_for_completed_packets_event(acl_connection_handles[0]);
     if (acl_packets_sent != completed_packets) {
-        ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__, acl_packets_sent,
-              completed_packets);
+      ALOGW("%s: packets_sent (%d) != completed_packets (%d)", __func__,
+            acl_packets_sent, completed_packets);
     }
   }
 }
diff --git a/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.cpp b/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.cpp
index 2a66abe..9abb88d 100644
--- a/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.cpp
+++ b/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.cpp
@@ -23,47 +23,52 @@
 namespace V1_0 {
 namespace implementation {
 
-IBluetoothAudioOffload* HIDL_FETCH_IBluetoothAudioOffload(const char* /* name */) {
-    return new BluetoothAudioOffload();
+IBluetoothAudioOffload* HIDL_FETCH_IBluetoothAudioOffload(
+    const char* /* name */) {
+  return new BluetoothAudioOffload();
 }
 
-// Methods from ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioOffload follow.
-Return<::android::hardware::bluetooth::a2dp::V1_0::Status> BluetoothAudioOffload::startSession(
-    const sp<::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioHost>& hostIf __unused,
-    const ::android::hardware::bluetooth::a2dp::V1_0::CodecConfiguration& codecConfig __unused) {
-    /**
-     * Initialize the audio platform if codecConfiguration is supported.
-     * Save the the IBluetoothAudioHost interface, so that it can be used
-     * later to send stream control commands to the HAL client, based on
-     * interaction with Audio framework.
-     */
-    return ::android::hardware::bluetooth::a2dp::V1_0::Status::FAILURE;
+// Methods from
+// ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioOffload follow.
+Return<::android::hardware::bluetooth::a2dp::V1_0::Status>
+BluetoothAudioOffload::startSession(
+    const sp<::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioHost>&
+        hostIf __unused,
+    const ::android::hardware::bluetooth::a2dp::V1_0::CodecConfiguration&
+        codecConfig __unused) {
+  /**
+   * Initialize the audio platform if codecConfiguration is supported.
+   * Save the the IBluetoothAudioHost interface, so that it can be used
+   * later to send stream control commands to the HAL client, based on
+   * interaction with Audio framework.
+   */
+  return ::android::hardware::bluetooth::a2dp::V1_0::Status::FAILURE;
 }
 
 Return<void> BluetoothAudioOffload::streamStarted(
     ::android::hardware::bluetooth::a2dp::V1_0::Status status __unused) {
-    /**
-     * Streaming on control path has started,
-     * HAL server should start the streaming on data path.
-     */
-    return Void();
+  /**
+   * Streaming on control path has started,
+   * HAL server should start the streaming on data path.
+   */
+  return Void();
 }
 
 Return<void> BluetoothAudioOffload::streamSuspended(
     ::android::hardware::bluetooth::a2dp::V1_0::Status status __unused) {
-    /**
-     * Streaming on control path has suspend,
-     * HAL server should suspend the streaming on data path.
-     */
-    return Void();
+  /**
+   * Streaming on control path has suspend,
+   * HAL server should suspend the streaming on data path.
+   */
+  return Void();
 }
 
 Return<void> BluetoothAudioOffload::endSession() {
-    /**
-     * Cleanup the audio platform as remote A2DP Sink device is no
-     * longer active
-     */
-    return Void();
+  /**
+   * Cleanup the audio platform as remote A2DP Sink device is no
+   * longer active
+   */
+  return Void();
 }
 
 }  // namespace implementation
diff --git a/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.h b/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.h
index 5d07b5b..16a83c2 100644
--- a/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.h
+++ b/bluetooth/a2dp/1.0/default/BluetoothAudioOffload.h
@@ -28,27 +28,32 @@
 namespace V1_0 {
 namespace implementation {
 
+using ::android::sp;
 using ::android::hardware::hidl_array;
 using ::android::hardware::hidl_memory;
 using ::android::hardware::hidl_string;
 using ::android::hardware::hidl_vec;
 using ::android::hardware::Return;
 using ::android::hardware::Void;
-using ::android::sp;
 
 struct BluetoothAudioOffload : public IBluetoothAudioOffload {
-    BluetoothAudioOffload() {}
-    // Methods from ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioOffload follow.
-    Return<::android::hardware::bluetooth::a2dp::V1_0::Status> startSession(
-        const sp<::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioHost>& hostIf,
-        const ::android::hardware::bluetooth::a2dp::V1_0::CodecConfiguration& codecConfig) override;
-    Return<void> streamStarted(::android::hardware::bluetooth::a2dp::V1_0::Status status) override;
-    Return<void> streamSuspended(
-        ::android::hardware::bluetooth::a2dp::V1_0::Status status) override;
-    Return<void> endSession() override;
+  BluetoothAudioOffload() {}
+  // Methods from
+  // ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioOffload follow.
+  Return<::android::hardware::bluetooth::a2dp::V1_0::Status> startSession(
+      const sp<::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioHost>&
+          hostIf,
+      const ::android::hardware::bluetooth::a2dp::V1_0::CodecConfiguration&
+          codecConfig) override;
+  Return<void> streamStarted(
+      ::android::hardware::bluetooth::a2dp::V1_0::Status status) override;
+  Return<void> streamSuspended(
+      ::android::hardware::bluetooth::a2dp::V1_0::Status status) override;
+  Return<void> endSession() override;
 };
 
-extern "C" IBluetoothAudioOffload* HIDL_FETCH_IBluetoothAudioOffload(const char* name);
+extern "C" IBluetoothAudioOffload* HIDL_FETCH_IBluetoothAudioOffload(
+    const char* name);
 
 }  // namespace implementation
 }  // namespace V1_0
diff --git a/bluetooth/a2dp/1.0/vts/OWNERS b/bluetooth/a2dp/1.0/vts/OWNERS
new file mode 100644
index 0000000..58d3a66
--- /dev/null
+++ b/bluetooth/a2dp/1.0/vts/OWNERS
@@ -0,0 +1,8 @@
+zachoverflow@google.com
+siyuanh@google.com
+mylesgw@google.com
+jpawlowski@google.com
+apanicke@google.com
+stng@google.com
+hsz@google.com
+
diff --git a/bluetooth/a2dp/1.0/vts/functional/Android.bp b/bluetooth/a2dp/1.0/vts/functional/Android.bp
index f1ffc45..e50e167 100644
--- a/bluetooth/a2dp/1.0/vts/functional/Android.bp
+++ b/bluetooth/a2dp/1.0/vts/functional/Android.bp
@@ -23,4 +23,5 @@
         "android.hardware.bluetooth.a2dp@1.0",
         "libbluetooth-types",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/bluetooth/a2dp/1.0/vts/functional/VtsHalBluetoothA2dpV1_0TargetTest.cpp b/bluetooth/a2dp/1.0/vts/functional/VtsHalBluetoothA2dpV1_0TargetTest.cpp
index 1a0342f..d8d0c29 100644
--- a/bluetooth/a2dp/1.0/vts/functional/VtsHalBluetoothA2dpV1_0TargetTest.cpp
+++ b/bluetooth/a2dp/1.0/vts/functional/VtsHalBluetoothA2dpV1_0TargetTest.cpp
@@ -26,85 +26,92 @@
 #include <VtsHalHidlTargetTestBase.h>
 #include <VtsHalHidlTargetTestEnvBase.h>
 
-using ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioHost;
-using ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioOffload;
-using ::android::hardware::bluetooth::a2dp::V1_0::Status;
-using ::android::hardware::bluetooth::a2dp::V1_0::CodecType;
-using ::android::hardware::bluetooth::a2dp::V1_0::SampleRate;
+using ::android::sp;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
 using ::android::hardware::bluetooth::a2dp::V1_0::BitsPerSample;
 using ::android::hardware::bluetooth::a2dp::V1_0::ChannelMode;
 using ::android::hardware::bluetooth::a2dp::V1_0::CodecConfiguration;
-using ::android::hardware::Return;
-using ::android::hardware::Void;
-using ::android::sp;
+using ::android::hardware::bluetooth::a2dp::V1_0::CodecType;
+using ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioHost;
+using ::android::hardware::bluetooth::a2dp::V1_0::IBluetoothAudioOffload;
+using ::android::hardware::bluetooth::a2dp::V1_0::SampleRate;
+using ::android::hardware::bluetooth::a2dp::V1_0::Status;
 
 // Test environment for Bluetooth HIDL A2DP HAL.
-class BluetoothA2dpHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
-   public:
-    // get the test environment singleton
-    static BluetoothA2dpHidlEnvironment* Instance() {
-        static BluetoothA2dpHidlEnvironment* instance = new BluetoothA2dpHidlEnvironment;
-        return instance;
-    }
+class BluetoothA2dpHidlEnvironment
+    : public ::testing::VtsHalHidlTargetTestEnvBase {
+ public:
+  // get the test environment singleton
+  static BluetoothA2dpHidlEnvironment* Instance() {
+    static BluetoothA2dpHidlEnvironment* instance =
+        new BluetoothA2dpHidlEnvironment;
+    return instance;
+  }
 
-    virtual void registerTestServices() override { registerTestService<IBluetoothAudioOffload>(); }
+  virtual void registerTestServices() override {
+    registerTestService<IBluetoothAudioOffload>();
+  }
 
-   private:
-    BluetoothA2dpHidlEnvironment() {}
+ private:
+  BluetoothA2dpHidlEnvironment() {}
 };
 
 // The main test class for Bluetooth A2DP HIDL HAL.
 class BluetoothA2dpHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+ public:
+  virtual void SetUp() override {
+    // currently test passthrough mode only
+    audio_offload =
+        ::testing::VtsHalHidlTargetTestBase::getService<IBluetoothAudioOffload>(
+            BluetoothA2dpHidlEnvironment::Instance()
+                ->getServiceName<IBluetoothAudioOffload>());
+    ASSERT_NE(audio_offload, nullptr);
+
+    audio_host = new BluetoothAudioHost(*this);
+    ASSERT_NE(audio_host, nullptr);
+
+    codec.codecType = CodecType::AAC;
+    codec.sampleRate = SampleRate::RATE_44100;
+    codec.bitsPerSample = BitsPerSample::BITS_16;
+    codec.channelMode = ChannelMode::STEREO;
+    codec.encodedAudioBitrate = 320000;
+    codec.peerMtu = 1000;
+  }
+
+  virtual void TearDown() override {}
+
+  // A simple test implementation of IBluetoothAudioHost.
+  class BluetoothAudioHost
+      : public ::testing::VtsHalHidlTargetCallbackBase<BluetoothA2dpHidlTest>,
+        public IBluetoothAudioHost {
+    BluetoothA2dpHidlTest& parent_;
+
    public:
-    virtual void SetUp() override {
-        // currently test passthrough mode only
-        audio_offload = ::testing::VtsHalHidlTargetTestBase::getService<IBluetoothAudioOffload>(
-            BluetoothA2dpHidlEnvironment::Instance()->getServiceName<IBluetoothAudioOffload>());
-        ASSERT_NE(audio_offload, nullptr);
+    BluetoothAudioHost(BluetoothA2dpHidlTest& parent) : parent_(parent){};
+    virtual ~BluetoothAudioHost() = default;
 
-        audio_host = new BluetoothAudioHost(*this);
-        ASSERT_NE(audio_host, nullptr);
-
-        codec.codecType = CodecType::AAC;
-        codec.sampleRate = SampleRate::RATE_44100;
-        codec.bitsPerSample = BitsPerSample::BITS_16;
-        codec.channelMode = ChannelMode::STEREO;
-        codec.encodedAudioBitrate = 320000;
-        codec.peerMtu = 1000;
-    }
-
-    virtual void TearDown() override {}
-
-    // A simple test implementation of IBluetoothAudioHost.
-    class BluetoothAudioHost
-        : public ::testing::VtsHalHidlTargetCallbackBase<BluetoothA2dpHidlTest>,
-          public IBluetoothAudioHost {
-        BluetoothA2dpHidlTest& parent_;
-
-       public:
-        BluetoothAudioHost(BluetoothA2dpHidlTest& parent) : parent_(parent){};
-        virtual ~BluetoothAudioHost() = default;
-
-        Return<void> startStream() override {
-            parent_.audio_offload->streamStarted(Status::SUCCESS);
-            return Void();
-        };
-
-        Return<void> suspendStream() override {
-            parent_.audio_offload->streamSuspended(Status::SUCCESS);
-            return Void();
-        };
-
-        Return<void> stopStream() override { return Void(); };
+    Return<void> startStream() override {
+      parent_.audio_offload->streamStarted(Status::SUCCESS);
+      return Void();
     };
 
-    // audio_host is for the Audio HAL to send stream start/suspend/stop commands to Bluetooth
-    sp<IBluetoothAudioHost> audio_host;
-    // audio_offload is for the Bluetooth HAL to report session started/ended and handled audio
-    // stream started/suspended
-    sp<IBluetoothAudioOffload> audio_offload;
-    // codec is the currently used codec
-    CodecConfiguration codec;
+    Return<void> suspendStream() override {
+      parent_.audio_offload->streamSuspended(Status::SUCCESS);
+      return Void();
+    };
+
+    Return<void> stopStream() override { return Void(); };
+  };
+
+  // audio_host is for the Audio HAL to send stream start/suspend/stop commands
+  // to Bluetooth
+  sp<IBluetoothAudioHost> audio_host;
+  // audio_offload is for the Bluetooth HAL to report session started/ended and
+  // handled audio stream started/suspended
+  sp<IBluetoothAudioOffload> audio_offload;
+  // codec is the currently used codec
+  CodecConfiguration codec;
 };
 
 // Empty test: Initialize()/Close() are called in SetUp()/TearDown().
@@ -112,15 +119,15 @@
 
 // Test start and end session
 TEST_F(BluetoothA2dpHidlTest, StartAndEndSession) {
-    EXPECT_EQ(Status::SUCCESS, audio_offload->startSession(audio_host, codec));
-    audio_offload->endSession();
+  EXPECT_EQ(Status::SUCCESS, audio_offload->startSession(audio_host, codec));
+  audio_offload->endSession();
 }
 
 int main(int argc, char** argv) {
-    ::testing::AddGlobalTestEnvironment(BluetoothA2dpHidlEnvironment::Instance());
-    ::testing::InitGoogleTest(&argc, argv);
-    BluetoothA2dpHidlEnvironment::Instance()->init(&argc, argv);
-    int status = RUN_ALL_TESTS();
-    LOG(INFO) << "Test result = " << status;
-    return status;
+  ::testing::AddGlobalTestEnvironment(BluetoothA2dpHidlEnvironment::Instance());
+  ::testing::InitGoogleTest(&argc, argv);
+  BluetoothA2dpHidlEnvironment::Instance()->init(&argc, argv);
+  int status = RUN_ALL_TESTS();
+  LOG(INFO) << "Test result = " << status;
+  return status;
 }
diff --git a/boot/1.0/default/Android.bp b/boot/1.0/default/Android.bp
index 6cfbf32..397c56d 100644
--- a/boot/1.0/default/Android.bp
+++ b/boot/1.0/default/Android.bp
@@ -3,6 +3,7 @@
     defaults: ["hidl_defaults"],
     relative_install_path: "hw",
     vendor: true,
+    recovery_available: true,
     srcs: ["BootControl.cpp"],
 
     shared_libs: [
diff --git a/boot/1.0/default/Android.mk b/boot/1.0/default/Android.mk
new file mode 100644
index 0000000..7ccc4c8
--- /dev/null
+++ b/boot/1.0/default/Android.mk
@@ -0,0 +1,30 @@
+# TODO(connoro): Remove this file once we eliminate existing usage of
+# PRODUCT_STATIC_BOOT_CONTROL_HAL
+
+LOCAL_PATH := $(call my-dir)
+
+ifneq ($(strip $(PRODUCT_STATIC_BOOT_CONTROL_HAL)),)
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := android.hardware.boot@1.0-impl-wrapper.recovery
+LOCAL_MODULE_CLASS := SHARED_LIBRARIES
+LOCAL_MULTILIB := first
+ifeq ($(TARGET_IS_64_BIT),true)
+LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)/system/lib64/hw
+else
+LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)/system/lib/hw
+endif
+LOCAL_SRC_FILES := BootControl.cpp
+LOCAL_CFLAGS := -DBOOT_CONTROL_RECOVERY
+LOCAL_SHARED_LIBRARIES := \
+    libbase.recovery \
+    liblog.recovery \
+    libhidlbase.recovery \
+    libhidltransport.recovery \
+    libhardware.recovery \
+    libutils.recovery \
+    android.hardware.boot@1.0.recovery
+LOCAL_STATIC_LIBRARIES := $(PRODUCT_STATIC_BOOT_CONTROL_HAL)
+include $(BUILD_SHARED_LIBRARY)
+
+endif
diff --git a/boot/1.0/default/BootControl.cpp b/boot/1.0/default/BootControl.cpp
index 9a90076..e36407f 100644
--- a/boot/1.0/default/BootControl.cpp
+++ b/boot/1.0/default/BootControl.cpp
@@ -21,6 +21,10 @@
 #include <hardware/boot_control.h>
 #include "BootControl.h"
 
+#ifdef BOOT_CONTROL_RECOVERY
+extern const hw_module_t HAL_MODULE_INFO_SYM;
+#endif
+
 namespace android {
 namespace hardware {
 namespace boot {
@@ -92,7 +96,23 @@
     return Void();
 }
 
+#ifdef BOOT_CONTROL_RECOVERY
+IBootControl* HIDL_FETCH_IBootControl(const char * /* hal */) {
+    boot_control_module_t* module;
 
+    // For devices that don't build a standalone libhardware bootctrl impl for recovery,
+    // we simulate the hw_get_module() by accessing it from the current process directly.
+    const hw_module_t* hw_module = &HAL_MODULE_INFO_SYM;
+    if (!hw_module ||
+        strcmp(BOOT_CONTROL_HARDWARE_MODULE_ID, hw_module->id) != 0) {
+        ALOGE("Error loading boot_control HAL implementation: %d.", -EINVAL);
+        return nullptr;
+    }
+    module = reinterpret_cast<boot_control_module_t*>(const_cast<hw_module_t*>(hw_module));
+    module->init(module);
+    return new BootControl(module);
+}
+#else
 IBootControl* HIDL_FETCH_IBootControl(const char* /* hal */) {
     int ret = 0;
     boot_control_module_t* module = NULL;
@@ -106,7 +126,7 @@
     module->init(module);
     return new BootControl(module);
 }
-
+#endif
 } // namespace implementation
 }  // namespace V1_0
 }  // namespace boot
diff --git a/boot/1.0/vts/functional/Android.bp b/boot/1.0/vts/functional/Android.bp
index 2ef89f3..5d1a9cb 100644
--- a/boot/1.0/vts/functional/Android.bp
+++ b/boot/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalBootV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.boot@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/broadcastradio/1.0/vts/functional/Android.bp b/broadcastradio/1.0/vts/functional/Android.bp
index 7040a01..9ba9fbe 100644
--- a/broadcastradio/1.0/vts/functional/Android.bp
+++ b/broadcastradio/1.0/vts/functional/Android.bp
@@ -22,4 +22,5 @@
         "android.hardware.broadcastradio@1.0",
         "android.hardware.broadcastradio@vts-utils-lib",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/broadcastradio/1.1/vts/functional/Android.bp b/broadcastradio/1.1/vts/functional/Android.bp
index 9240cf0..0a02a69 100644
--- a/broadcastradio/1.1/vts/functional/Android.bp
+++ b/broadcastradio/1.1/vts/functional/Android.bp
@@ -25,4 +25,5 @@
         "android.hardware.broadcastradio@vts-utils-lib",
         "libgmock",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/broadcastradio/2.0/vts/functional/Android.bp b/broadcastradio/2.0/vts/functional/Android.bp
index 6940bca..3e18a54 100644
--- a/broadcastradio/2.0/vts/functional/Android.bp
+++ b/broadcastradio/2.0/vts/functional/Android.bp
@@ -28,4 +28,5 @@
         "android.hardware.broadcastradio@vts-utils-lib",
         "libgmock",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/broadcastradio/common/tests/Android.bp b/broadcastradio/common/tests/Android.bp
index 3ba31db..ef8733c 100644
--- a/broadcastradio/common/tests/Android.bp
+++ b/broadcastradio/common/tests/Android.bp
@@ -36,6 +36,7 @@
         "android.hardware.broadcastradio@1.1",
         "android.hardware.broadcastradio@2.0",
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -59,6 +60,7 @@
     shared_libs: [
         "android.hardware.broadcastradio@2.0",
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -73,4 +75,5 @@
         "WorkerThread_test.cpp",
     ],
     static_libs: ["android.hardware.broadcastradio@common-utils-lib"],
+    test_suites: ["general-tests"],
 }
diff --git a/broadcastradio/common/utils2x/Android.bp b/broadcastradio/common/utils2x/Android.bp
index aab94f2..df2cefe 100644
--- a/broadcastradio/common/utils2x/Android.bp
+++ b/broadcastradio/common/utils2x/Android.bp
@@ -22,6 +22,7 @@
         "-Wall",
         "-Wextra",
         "-Werror",
+        "-Wno-error=implicit-fallthrough",
     ],
     cppflags: [
         "-std=c++1z",
diff --git a/broadcastradio/common/utils2x/Utils.cpp b/broadcastradio/common/utils2x/Utils.cpp
index 3e20b35..f292c08 100644
--- a/broadcastradio/common/utils2x/Utils.cpp
+++ b/broadcastradio/common/utils2x/Utils.cpp
@@ -215,7 +215,7 @@
             break;
         case IdentifierType::DAB_FREQUENCY:
             expect(val > 100000u, "f > 100MHz");
-        // fallthrough
+            [[fallthrough]];
         case IdentifierType::AMFM_FREQUENCY:
         case IdentifierType::DRMO_FREQUENCY:
             expect(val > 100u, "f > 100kHz");
diff --git a/camera/common/1.0/default/VendorTagDescriptor.cpp b/camera/common/1.0/default/VendorTagDescriptor.cpp
index 1f53857..052bf5b 100644
--- a/camera/common/1.0/default/VendorTagDescriptor.cpp
+++ b/camera/common/1.0/default/VendorTagDescriptor.cpp
@@ -258,7 +258,7 @@
 
     for (size_t i = 0; i < static_cast<size_t>(tagCount); ++i) {
         uint32_t tag = tagArray[i];
-        String8 sectionString = tagToSectionMap.valueFor(tag);
+        const String8& sectionString = tagToSectionMap.valueFor(tag);
 
         // Set up tag to section index map
         ssize_t index = sections.indexOf(sectionString);
diff --git a/camera/device/1.0/Android.bp b/camera/device/1.0/Android.bp
index dbf2a10..b08f873 100644
--- a/camera/device/1.0/Android.bp
+++ b/camera/device/1.0/Android.bp
@@ -29,6 +29,6 @@
         "NotifyCallbackMsg",
         "VideoFrameMessage",
     ],
-    gen_java: false,
+    gen_java: true,
 }
 
diff --git a/camera/device/3.2/ICameraDeviceSession.hal b/camera/device/3.2/ICameraDeviceSession.hal
index 477a3cc..e62dc07 100644
--- a/camera/device/3.2/ICameraDeviceSession.hal
+++ b/camera/device/3.2/ICameraDeviceSession.hal
@@ -91,11 +91,11 @@
      * later configureStreams() call by the framework, and all the gralloc
      * buffers for it must be freed after the configureStreams() call returns.
      *
-     * If the stream is new, the maxBuffer field of the stream structure must be
-     * set to 0. The usage must be set to the consumer usage flags. The HAL
-     * device must set these fields in the configureStreams() return values.
-     * These fields are then used by the framework and the platform gralloc
-     * module to allocate the gralloc buffers for each stream.
+     * If the stream is new, the client must set the consumer usage flags in
+     * requestedConfiguration. Upon return, the HAL device must set producerUsage,
+     * maxBuffers, and other fields in the configureStreams() return values. These
+     * fields are then used by the framework and the platform gralloc module to
+     * allocate the gralloc buffers for each stream.
      *
      * Newly allocated buffers may be included in a capture request at any time
      * by the framework. Once a gralloc buffer is returned to the framework
diff --git a/camera/device/3.2/default/CameraDevice.cpp b/camera/device/3.2/default/CameraDevice.cpp
index dfbb976..297e778 100644
--- a/camera/device/3.2/default/CameraDevice.cpp
+++ b/camera/device/3.2/default/CameraDevice.cpp
@@ -262,7 +262,7 @@
             session->getInterface()->interfaceChain([](
                 ::android::hardware::hidl_vec<::android::hardware::hidl_string> interfaceChain) {
                     ALOGV("Session interface chain:");
-                    for (auto iface : interfaceChain) {
+                    for (const auto& iface : interfaceChain) {
                         ALOGV("  %s", iface.c_str());
                     }
                 });
diff --git a/camera/device/3.2/default/CameraDeviceSession.cpp b/camera/device/3.2/default/CameraDeviceSession.cpp
index 69f8535..fd785df 100644
--- a/camera/device/3.2/default/CameraDeviceSession.cpp
+++ b/camera/device/3.2/default/CameraDeviceSession.cpp
@@ -53,6 +53,7 @@
         camera3_callback_ops({&sProcessCaptureResult, &sNotify}),
         mDevice(device),
         mDeviceVersion(device->common.version),
+        mFreeBufEarly(shouldFreeBufEarly()),
         mIsAELockAvailable(false),
         mDerivePostRawSensKey(false),
         mNumPartialResults(1),
@@ -129,6 +130,10 @@
     return false;
 }
 
+bool CameraDeviceSession::shouldFreeBufEarly() {
+    return property_get_bool("ro.vendor.camera.free_buf_early", 0) == 1;
+}
+
 CameraDeviceSession::~CameraDeviceSession() {
     if (!isClosed()) {
         ALOGE("CameraDeviceSession deleted before close!");
@@ -887,6 +892,24 @@
         (*streams)[i] = &mStreamMap[id];
     }
 
+    if (mFreeBufEarly) {
+        // Remove buffers of deleted streams
+        for(auto it = mStreamMap.begin(); it != mStreamMap.end(); it++) {
+            int id = it->first;
+            bool found = false;
+            for (const auto& stream : requestedConfiguration.streams) {
+                if (id == stream.id) {
+                    found = true;
+                    break;
+                }
+            }
+            if (!found) {
+                // Unmap all buffers of deleted stream
+                cleanupBuffersLocked(id);
+            }
+        }
+    }
+
     return true;
 }
 
@@ -908,7 +931,9 @@
             // Unmap all buffers of deleted stream
             // in case the configuration call succeeds and HAL
             // is able to release the corresponding resources too.
-            cleanupBuffersLocked(id);
+            if (!mFreeBufEarly) {
+                cleanupBuffersLocked(id);
+            }
             it = mStreamMap.erase(it);
         } else {
             ++it;
@@ -927,6 +952,27 @@
     mResultBatcher.setBatchedStreams(mVideoStreamIds);
 }
 
+
+void CameraDeviceSession::postProcessConfigurationFailureLocked(
+        const StreamConfiguration& requestedConfiguration) {
+    if (mFreeBufEarly) {
+        // Re-build the buf cache entry for deleted streams
+        for(auto it = mStreamMap.begin(); it != mStreamMap.end(); it++) {
+            int id = it->first;
+            bool found = false;
+            for (const auto& stream : requestedConfiguration.streams) {
+                if (id == stream.id) {
+                    found = true;
+                    break;
+                }
+            }
+            if (!found) {
+                mCirculatingBuffers.emplace(id, CirculatingBuffers{});
+            }
+        }
+    }
+}
+
 Return<void> CameraDeviceSession::configureStreams(
         const StreamConfiguration& requestedConfiguration,
         ICameraDeviceSession::configureStreams_cb _hidl_cb)  {
@@ -979,6 +1025,8 @@
     // the corresponding resources of the deleted streams.
     if (ret == OK) {
         postProcessConfigurationLocked(requestedConfiguration);
+    } else {
+        postProcessConfigurationFailureLocked(requestedConfiguration);
     }
 
     if (ret == -EINVAL) {
diff --git a/camera/device/3.2/default/CameraDeviceSession.h b/camera/device/3.2/default/CameraDeviceSession.h
index af90e5a..bcee259 100644
--- a/camera/device/3.2/default/CameraDeviceSession.h
+++ b/camera/device/3.2/default/CameraDeviceSession.h
@@ -120,6 +120,8 @@
             hidl_vec<camera3_stream_t*> *streams /*out*/);
     void postProcessConfigurationLocked(const StreamConfiguration& requestedConfiguration);
 
+    void postProcessConfigurationFailureLocked(const StreamConfiguration& requestedConfiguration);
+
 protected:
 
     // protecting mClosed/mDisconnected/mInitFail
@@ -142,6 +144,7 @@
 
     camera3_device_t* mDevice;
     const uint32_t mDeviceVersion;
+    const bool mFreeBufEarly;
     bool mIsAELockAvailable;
     bool mDerivePostRawSensKey;
     uint32_t mNumPartialResults;
@@ -293,6 +296,8 @@
 
     bool initialize();
 
+    static bool shouldFreeBufEarly();
+
     Status initStatus() const;
 
     // Validate and import request's input buffer and acquire fence
diff --git a/camera/device/3.3/default/CameraDevice.cpp b/camera/device/3.3/default/CameraDevice.cpp
index ce5e1de..b4d279e 100644
--- a/camera/device/3.3/default/CameraDevice.cpp
+++ b/camera/device/3.3/default/CameraDevice.cpp
@@ -49,7 +49,7 @@
         session->getInterface()->interfaceChain([](
             ::android::hardware::hidl_vec<::android::hardware::hidl_string> interfaceChain) {
                 ALOGV("Session interface chain:");
-                for (auto iface : interfaceChain) {
+                for (const auto& iface : interfaceChain) {
                     ALOGV("  %s", iface.c_str());
                 }
             });
diff --git a/camera/device/3.3/default/CameraDeviceSession.cpp b/camera/device/3.3/default/CameraDeviceSession.cpp
index d36e9ed..60174fb 100644
--- a/camera/device/3.3/default/CameraDeviceSession.cpp
+++ b/camera/device/3.3/default/CameraDeviceSession.cpp
@@ -92,6 +92,8 @@
     // the corresponding resources of the deleted streams.
     if (ret == OK) {
         postProcessConfigurationLocked(requestedConfiguration);
+    } else {
+        postProcessConfigurationFailureLocked(requestedConfiguration);
     }
 
     if (ret == -EINVAL) {
diff --git a/camera/device/3.4/default/CameraDevice.cpp b/camera/device/3.4/default/CameraDevice.cpp
index d73833a..bc443de 100644
--- a/camera/device/3.4/default/CameraDevice.cpp
+++ b/camera/device/3.4/default/CameraDevice.cpp
@@ -49,7 +49,7 @@
         session->getInterface()->interfaceChain([](
             ::android::hardware::hidl_vec<::android::hardware::hidl_string> interfaceChain) {
                 ALOGV("Session interface chain:");
-                for (auto iface : interfaceChain) {
+                for (const auto& iface : interfaceChain) {
                     ALOGV("  %s", iface.c_str());
                 }
             });
diff --git a/camera/device/3.4/default/CameraDeviceSession.cpp b/camera/device/3.4/default/CameraDeviceSession.cpp
index 6a18161..f2e031c 100644
--- a/camera/device/3.4/default/CameraDeviceSession.cpp
+++ b/camera/device/3.4/default/CameraDeviceSession.cpp
@@ -154,6 +154,8 @@
     // the corresponding resources of the deleted streams.
     if (ret == OK) {
         postProcessConfigurationLocked_3_4(requestedConfiguration);
+    } else {
+        postProcessConfigurationFailureLocked_3_4(requestedConfiguration);
     }
 
     if (ret == -EINVAL) {
@@ -215,6 +217,23 @@
         (*streams)[i] = &mStreamMap[id];
     }
 
+    if (mFreeBufEarly) {
+        // Remove buffers of deleted streams
+        for(auto it = mStreamMap.begin(); it != mStreamMap.end(); it++) {
+            int id = it->first;
+            bool found = false;
+            for (const auto& stream : requestedConfiguration.streams) {
+                if (id == stream.v3_2.id) {
+                    found = true;
+                    break;
+                }
+            }
+            if (!found) {
+                // Unmap all buffers of deleted stream
+                cleanupBuffersLocked(id);
+            }
+        }
+    }
     return true;
 }
 
@@ -236,7 +255,9 @@
             // Unmap all buffers of deleted stream
             // in case the configuration call succeeds and HAL
             // is able to release the corresponding resources too.
-            cleanupBuffersLocked(id);
+            if (!mFreeBufEarly) {
+                cleanupBuffersLocked(id);
+            }
             it = mStreamMap.erase(it);
         } else {
             ++it;
@@ -255,6 +276,26 @@
     mResultBatcher_3_4.setBatchedStreams(mVideoStreamIds);
 }
 
+void CameraDeviceSession::postProcessConfigurationFailureLocked_3_4(
+        const StreamConfiguration& requestedConfiguration) {
+    if (mFreeBufEarly) {
+        // Re-build the buf cache entry for deleted streams
+        for(auto it = mStreamMap.begin(); it != mStreamMap.end(); it++) {
+            int id = it->first;
+            bool found = false;
+            for (const auto& stream : requestedConfiguration.streams) {
+                if (id == stream.v3_2.id) {
+                    found = true;
+                    break;
+                }
+            }
+            if (!found) {
+                mCirculatingBuffers.emplace(id, CirculatingBuffers{});
+            }
+        }
+    }
+}
+
 Return<void> CameraDeviceSession::processCaptureRequest_3_4(
         const hidl_vec<V3_4::CaptureRequest>& requests,
         const hidl_vec<V3_2::BufferCache>& cachesToRemove,
diff --git a/camera/device/3.4/default/ExternalCameraDevice.cpp b/camera/device/3.4/default/ExternalCameraDevice.cpp
index ee7ffaa..e7361dd 100644
--- a/camera/device/3.4/default/ExternalCameraDevice.cpp
+++ b/camera/device/3.4/default/ExternalCameraDevice.cpp
@@ -90,7 +90,7 @@
 }
 
 Return<Status> ExternalCameraDevice::setTorchMode(TorchMode) {
-    return Status::METHOD_NOT_SUPPORTED;
+    return Status::OPERATION_NOT_SUPPORTED;
 }
 
 Return<void> ExternalCameraDevice::open(
@@ -290,8 +290,14 @@
     UPDATE(ANDROID_HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES, &hotPixelMode, 1);
 
     // android.jpeg
-    // TODO: b/72261675 See if we can provide thumbnail size for all jpeg aspect ratios
-    const int32_t jpegAvailableThumbnailSizes[] = {0, 0, 240, 180};
+    const int32_t jpegAvailableThumbnailSizes[] = {0, 0,
+                                                  176, 144,
+                                                  240, 144,
+                                                  256, 144,
+                                                  240, 160,
+                                                  256, 154,
+                                                  240, 240,
+                                                  320, 240};
     UPDATE(ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES, jpegAvailableThumbnailSizes,
            ARRAY_SIZE(jpegAvailableThumbnailSizes));
 
@@ -787,7 +793,8 @@
 std::vector<SupportedV4L2Format>
 ExternalCameraDevice::getCandidateSupportedFormatsLocked(
         int fd, CroppingType cropType,
-        const std::vector<ExternalCameraConfig::FpsLimitation>& fpsLimits) {
+        const std::vector<ExternalCameraConfig::FpsLimitation>& fpsLimits,
+        const Size& minStreamSize) {
     std::vector<SupportedV4L2Format> outFmts;
     struct v4l2_fmtdesc fmtdesc {
         .index = 0,
@@ -822,6 +829,11 @@
                         if (frameSize.discrete.height > frameSize.discrete.width) {
                             continue;
                         }
+                        // Discard all formats which is smaller than minStreamSize
+                        if (frameSize.discrete.width < minStreamSize.width
+                            || frameSize.discrete.height < minStreamSize.height) {
+                            continue;
+                        }
                         SupportedV4L2Format format {
                             .width = frameSize.discrete.width,
                             .height = frameSize.discrete.height,
@@ -864,9 +876,9 @@
 void ExternalCameraDevice::initSupportedFormatsLocked(int fd) {
 
     std::vector<SupportedV4L2Format> horizontalFmts =
-            getCandidateSupportedFormatsLocked(fd, HORIZONTAL, mCfg.fpsLimits);
+            getCandidateSupportedFormatsLocked(fd, HORIZONTAL, mCfg.fpsLimits, mCfg.minStreamSize);
     std::vector<SupportedV4L2Format> verticalFmts =
-            getCandidateSupportedFormatsLocked(fd, VERTICAL, mCfg.fpsLimits);
+            getCandidateSupportedFormatsLocked(fd, VERTICAL, mCfg.fpsLimits, mCfg.minStreamSize);
 
     size_t horiSize = horizontalFmts.size();
     size_t vertSize = verticalFmts.size();
diff --git a/camera/device/3.4/default/ExternalCameraDeviceSession.cpp b/camera/device/3.4/default/ExternalCameraDeviceSession.cpp
index 1af3f39..dce40ff 100644
--- a/camera/device/3.4/default/ExternalCameraDeviceSession.cpp
+++ b/camera/device/3.4/default/ExternalCameraDeviceSession.cpp
@@ -1737,7 +1737,11 @@
     // TODO: see if we can save some computation by converting to YV12 here
     uint8_t* inData;
     size_t inDataSize;
-    req->frameIn->map(&inData, &inDataSize);
+    if (req->frameIn->map(&inData, &inDataSize) != 0) {
+        lk.unlock();
+        return onDeviceError("%s: V4L2 buffer map failed", __FUNCTION__);
+    }
+
     // TODO: in some special case maybe we can decode jpg directly to gralloc output?
     ATRACE_BEGIN("MJPGtoI420");
     int res = libyuv::MJPGToI420(
@@ -2070,6 +2074,7 @@
                 ALOGI("%s: BLOB format does not support dataSpace %x", __FUNCTION__, ds);
                 return false;
             }
+            break;
         case PixelFormat::IMPLEMENTATION_DEFINED:
         case PixelFormat::YCBCR_420_888:
         case PixelFormat::YV12:
@@ -2727,7 +2732,7 @@
     const uint8_t controlMode = ANDROID_CONTROL_MODE_AUTO;
     UPDATE(md, ANDROID_CONTROL_MODE, &controlMode, 1);
 
-    auto requestTemplates = hidl_enum_iterator<RequestTemplate>();
+    auto requestTemplates = hidl_enum_range<RequestTemplate>();
     for (RequestTemplate type : requestTemplates) {
         ::android::hardware::camera::common::V1_0::helper::CameraMetadata mdCopy = md;
         uint8_t intent = ANDROID_CONTROL_CAPTURE_INTENT_PREVIEW;
diff --git a/camera/device/3.4/default/ExternalCameraUtils.cpp b/camera/device/3.4/default/ExternalCameraUtils.cpp
index 2e2f73b..680c95a 100644
--- a/camera/device/3.4/default/ExternalCameraUtils.cpp
+++ b/camera/device/3.4/default/ExternalCameraUtils.cpp
@@ -267,6 +267,15 @@
         ret.fpsLimits = limits;
     }
 
+    XMLElement *minStreamSize = deviceCfg->FirstChildElement("MinimumStreamSize");
+    if (minStreamSize == nullptr) {
+       ALOGI("%s: no minimum stream size specified", __FUNCTION__);
+    } else {
+        ret.minStreamSize = {
+                minStreamSize->UnsignedAttribute("width", /*Default*/0),
+                minStreamSize->UnsignedAttribute("height", /*Default*/0)};
+    }
+
     ALOGI("%s: external camera cfg loaded: maxJpgBufSize %d,"
             " num video buffers %d, num still buffers %d",
             __FUNCTION__, ret.maxJpegBufSize,
@@ -275,6 +284,8 @@
         ALOGI("%s: fpsLimitList: %dx%d@%f", __FUNCTION__,
                 limit.size.width, limit.size.height, limit.fpsUpperBound);
     }
+    ALOGI("%s: minStreamSize: %dx%d" , __FUNCTION__,
+         ret.minStreamSize.width, ret.minStreamSize.height);
     return ret;
 }
 
@@ -285,6 +296,7 @@
     fpsLimits.push_back({/*Size*/{ 640,  480}, /*FPS upper bound*/30.0});
     fpsLimits.push_back({/*Size*/{1280,  720}, /*FPS upper bound*/7.5});
     fpsLimits.push_back({/*Size*/{1920, 1080}, /*FPS upper bound*/5.0});
+    minStreamSize = {0, 0};
 }
 
 
diff --git a/camera/device/3.4/default/include/device_v3_4_impl/CameraDeviceSession.h b/camera/device/3.4/default/include/device_v3_4_impl/CameraDeviceSession.h
index 5d6a112..fdc8a5a 100644
--- a/camera/device/3.4/default/include/device_v3_4_impl/CameraDeviceSession.h
+++ b/camera/device/3.4/default/include/device_v3_4_impl/CameraDeviceSession.h
@@ -84,6 +84,8 @@
             camera3_stream_configuration_t *stream_list /*out*/,
             hidl_vec<camera3_stream_t*> *streams /*out*/);
     void postProcessConfigurationLocked_3_4(const StreamConfiguration& requestedConfiguration);
+    void postProcessConfigurationFailureLocked_3_4(
+            const StreamConfiguration& requestedConfiguration);
 
     Return<void> processCaptureRequest_3_4(
             const hidl_vec<V3_4::CaptureRequest>& requests,
diff --git a/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDevice_3_4.h b/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDevice_3_4.h
index a52f0e4..ff0cfb3 100644
--- a/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDevice_3_4.h
+++ b/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDevice_3_4.h
@@ -96,7 +96,8 @@
     // Get candidate supported formats list of input cropping type.
     static std::vector<SupportedV4L2Format> getCandidateSupportedFormatsLocked(
             int fd, CroppingType cropType,
-            const std::vector<ExternalCameraConfig::FpsLimitation>& fpsLimits);
+            const std::vector<ExternalCameraConfig::FpsLimitation>& fpsLimits,
+            const Size& minStreamSize);
     // Trim supported format list by the cropping type. Also sort output formats by width/height
     static void trimSupportedFormats(CroppingType cropType,
             /*inout*/std::vector<SupportedV4L2Format>* pFmts);
diff --git a/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraUtils.h b/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraUtils.h
index 37e7cfb..5754ccb 100644
--- a/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraUtils.h
+++ b/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraUtils.h
@@ -77,6 +77,9 @@
     };
     std::vector<FpsLimitation> fpsLimits;
 
+    // Minimum output stream size
+    Size minStreamSize;
+
 private:
     ExternalCameraConfig();
 };
diff --git a/camera/provider/2.4/default/ExternalCameraProvider.cpp b/camera/provider/2.4/default/ExternalCameraProvider.cpp
index a4046d0..1cec0e5 100644
--- a/camera/provider/2.4/default/ExternalCameraProvider.cpp
+++ b/camera/provider/2.4/default/ExternalCameraProvider.cpp
@@ -105,8 +105,9 @@
 
 Return<void> ExternalCameraProvider::isSetTorchModeSupported(
         isSetTorchModeSupported_cb _hidl_cb) {
-    // No torch mode support for USB camera
-    _hidl_cb (Status::OK, false);
+    // setTorchMode API is supported, though right now no external camera device
+    // has a flash unit.
+    _hidl_cb (Status::OK, true);
     return Void();
 }
 
diff --git a/camera/provider/2.4/vts/functional/Android.bp b/camera/provider/2.4/vts/functional/Android.bp
index ead4083..c71ce2f 100644
--- a/camera/provider/2.4/vts/functional/Android.bp
+++ b/camera/provider/2.4/vts/functional/Android.bp
@@ -45,4 +45,5 @@
         "libgrallocusage",
         "libhidlmemory",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/cas/1.0/default/Android.bp b/cas/1.0/default/Android.bp
index 544162b..debb3e5 100644
--- a/cas/1.0/default/Android.bp
+++ b/cas/1.0/default/Android.bp
@@ -1,5 +1,5 @@
-cc_binary {
-    name: "android.hardware.cas@1.0-service",
+cc_defaults {
+    name: "cas_service_defaults",
     defaults: ["hidl_defaults"],
     vendor: true,
     relative_install_path: "hw",
@@ -13,7 +13,6 @@
     ],
 
     compile_multilib: "32",
-    init_rc: ["android.hardware.cas@1.0-service.rc"],
 
     shared_libs: [
       "android.hardware.cas@1.0",
@@ -31,3 +30,19 @@
       "media_plugin_headers",
     ],
 }
+
+cc_binary {
+    name: "android.hardware.cas@1.0-service",
+    vintf_fragments: ["android.hardware.cas@1.0-service.xml"],
+    defaults: ["cas_service_defaults"],
+    init_rc: ["android.hardware.cas@1.0-service.rc"],
+}
+
+cc_binary {
+    name: "android.hardware.cas@1.0-service-lazy",
+    vintf_fragments: ["android.hardware.cas@1.0-service-lazy.xml"],
+    overrides: ["android.hardware.cas@1.0-service"],
+    defaults: ["cas_service_defaults"],
+    init_rc: ["android.hardware.cas@1.0-service-lazy.rc"],
+    cflags: ["-DLAZY_SERVICE"],
+}
diff --git a/cas/1.0/default/android.hardware.cas@1.0-service-lazy.rc b/cas/1.0/default/android.hardware.cas@1.0-service-lazy.rc
new file mode 100644
index 0000000..443549a
--- /dev/null
+++ b/cas/1.0/default/android.hardware.cas@1.0-service-lazy.rc
@@ -0,0 +1,9 @@
+service vendor.cas-hal-1-0 /vendor/bin/hw/android.hardware.cas@1.0-service-lazy
+    interface android.hardware.cas@1.0::IMediaCasService default
+    oneshot
+    disabled
+    class hal
+    user media
+    group mediadrm drmrpc
+    ioprio rt 4
+    writepid /dev/cpuset/foreground/tasks
diff --git a/cas/1.0/default/android.hardware.cas@1.0-service-lazy.xml b/cas/1.0/default/android.hardware.cas@1.0-service-lazy.xml
new file mode 100644
index 0000000..9b55370
--- /dev/null
+++ b/cas/1.0/default/android.hardware.cas@1.0-service-lazy.xml
@@ -0,0 +1,11 @@
+<manifest version="1.0" type="device">
+    <hal format="hidl">
+        <name>android.hardware.cas</name>
+        <transport>hwbinder</transport>
+        <version>1.0</version>
+        <interface>
+            <name>IMediaCasService</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+</manifest>
diff --git a/cas/1.0/default/android.hardware.cas@1.0-service.xml b/cas/1.0/default/android.hardware.cas@1.0-service.xml
new file mode 100644
index 0000000..9b55370
--- /dev/null
+++ b/cas/1.0/default/android.hardware.cas@1.0-service.xml
@@ -0,0 +1,11 @@
+<manifest version="1.0" type="device">
+    <hal format="hidl">
+        <name>android.hardware.cas</name>
+        <transport>hwbinder</transport>
+        <version>1.0</version>
+        <interface>
+            <name>IMediaCasService</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+</manifest>
diff --git a/cas/1.0/default/service.cpp b/cas/1.0/default/service.cpp
index 04a8ad9..516acfb 100644
--- a/cas/1.0/default/service.cpp
+++ b/cas/1.0/default/service.cpp
@@ -15,7 +15,11 @@
  */
 
 //#define LOG_NDEBUG 0
+#ifdef LAZY_SERVICE
+#define LOG_TAG "android.hardware.cas@1.0-service-lazy"
+#else
 #define LOG_TAG "android.hardware.cas@1.0-service"
+#endif
 
 #include <binder/ProcessState.h>
 #include <hidl/HidlTransportSupport.h>
@@ -25,24 +29,30 @@
 
 using android::hardware::configureRpcThreadpool;
 using android::hardware::joinRpcThreadpool;
-using android::hardware::cas::V1_0::implementation::MediaCasService;
+using android::hardware::LazyServiceRegistrar;
 using android::hardware::cas::V1_0::IMediaCasService;
+using android::hardware::cas::V1_0::implementation::MediaCasService;
+
+#ifdef LAZY_SERVICE
+const bool kLazyService = true;
+#else
+const bool kLazyService = false;
+#endif
 
 int main() {
-    ALOGD("android.hardware.cas@1.0-service starting...");
-
-    // The CAS HAL may communicate to other vendor components via
-    // /dev/vndbinder
-    android::ProcessState::initWithDriver("/dev/vndbinder");
-
     configureRpcThreadpool(8, true /* callerWillJoin */);
 
     // Setup hwbinder service
     android::sp<IMediaCasService> service = new MediaCasService();
-    android::status_t status = service->registerAsService();
-    LOG_ALWAYS_FATAL_IF(
-            status != android::OK,
-            "Error while registering cas service: %d", status);
+    android::status_t status;
+    if (kLazyService) {
+        auto serviceRegistrar = std::make_shared<LazyServiceRegistrar>();
+        status = serviceRegistrar->registerService(service);
+    } else {
+        status = service->registerAsService();
+    }
+    LOG_ALWAYS_FATAL_IF(status != android::OK, "Error while registering cas service: %d", status);
+
     joinRpcThreadpool();
     return 0;
 }
diff --git a/cas/1.0/vts/functional/Android.bp b/cas/1.0/vts/functional/Android.bp
index 0db9bb0..622baa5 100644
--- a/cas/1.0/vts/functional/Android.bp
+++ b/cas/1.0/vts/functional/Android.bp
@@ -29,5 +29,6 @@
     shared_libs: [
         "libbinder",
     ],
+    test_suites: ["general-tests"],
 }
 
diff --git a/compatibility_matrices/Android.bp b/compatibility_matrices/Android.bp
new file mode 100644
index 0000000..5f56ee9
--- /dev/null
+++ b/compatibility_matrices/Android.bp
@@ -0,0 +1,77 @@
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+vintf_compatibility_matrix {
+    name: "framework_compatibility_matrix.legacy.xml",
+    stem: "compatibility_matrix.legacy.xml",
+    srcs: [
+        "compatibility_matrix.legacy.xml",
+    ],
+    kernel_configs: [
+        // legacy uses O kernel requirements
+        "kernel_config_o_3.18",
+        "kernel_config_o_4.4",
+        "kernel_config_o_4.9",
+    ]
+}
+vintf_compatibility_matrix {
+    name: "framework_compatibility_matrix.1.xml",
+    stem: "compatibility_matrix.1.xml",
+    srcs: [
+        "compatibility_matrix.1.xml",
+    ],
+    kernel_configs: [
+        "kernel_config_o_3.18",
+        "kernel_config_o_4.4",
+        "kernel_config_o_4.9",
+    ]
+}
+vintf_compatibility_matrix {
+    name: "framework_compatibility_matrix.2.xml",
+    stem: "compatibility_matrix.2.xml",
+    srcs: [
+        "compatibility_matrix.2.xml",
+    ],
+    kernel_configs: [
+        "kernel_config_o_mr1_3.18",
+        "kernel_config_o_mr1_4.4",
+        "kernel_config_o_mr1_4.9",
+    ]
+}
+
+vintf_compatibility_matrix {
+    name: "framework_compatibility_matrix.3.xml",
+    stem: "compatibility_matrix.3.xml",
+    srcs: [
+        "compatibility_matrix.3.xml",
+    ],
+    kernel_configs: [
+        "kernel_config_p_4.4",
+        "kernel_config_p_4.9",
+        "kernel_config_p_4.14",
+    ]
+}
+
+vintf_compatibility_matrix {
+    name: "framework_compatibility_matrix.current.xml",
+    stem: "compatibility_matrix.current.xml",
+    srcs: [
+        "compatibility_matrix.current.xml",
+    ],
+    kernel_configs: [
+        "kernel_config_current_4.9",
+        "kernel_config_current_4.14",
+        "kernel_config_current_4.19",
+    ]
+}
diff --git a/compatibility_matrices/Android.mk b/compatibility_matrices/Android.mk
index 3702cf0..6be6930 100644
--- a/compatibility_matrices/Android.mk
+++ b/compatibility_matrices/Android.mk
@@ -18,60 +18,6 @@
 
 BUILD_FRAMEWORK_COMPATIBILITY_MATRIX := $(LOCAL_PATH)/compatibility_matrix.mk
 
-my_kernel_config_data := kernel/configs
-
-# Install all compatibility_matrix.*.xml to /system/etc/vintf
-
-include $(CLEAR_VARS)
-include $(LOCAL_PATH)/clear_vars.mk
-LOCAL_MODULE := framework_compatibility_matrix.legacy.xml
-LOCAL_MODULE_STEM := compatibility_matrix.legacy.xml
-LOCAL_SRC_FILES := $(LOCAL_MODULE_STEM)
-LOCAL_KERNEL_CONFIG_DATA_PATHS := \
-    3.18.0:$(my_kernel_config_data)/o/android-3.18 \
-    4.4.0:$(my_kernel_config_data)/o/android-4.4 \
-    4.9.0:$(my_kernel_config_data)/o/android-4.9 \
-
-include $(BUILD_FRAMEWORK_COMPATIBILITY_MATRIX)
-
-include $(CLEAR_VARS)
-include $(LOCAL_PATH)/clear_vars.mk
-LOCAL_MODULE := framework_compatibility_matrix.1.xml
-LOCAL_MODULE_STEM := compatibility_matrix.1.xml
-LOCAL_SRC_FILES := $(LOCAL_MODULE_STEM)
-LOCAL_KERNEL_CONFIG_DATA_PATHS := \
-    3.18.0:$(my_kernel_config_data)/o/android-3.18 \
-    4.4.0:$(my_kernel_config_data)/o/android-4.4 \
-    4.9.0:$(my_kernel_config_data)/o/android-4.9 \
-
-include $(BUILD_FRAMEWORK_COMPATIBILITY_MATRIX)
-
-include $(CLEAR_VARS)
-include $(LOCAL_PATH)/clear_vars.mk
-LOCAL_MODULE := framework_compatibility_matrix.2.xml
-LOCAL_MODULE_STEM := compatibility_matrix.2.xml
-LOCAL_SRC_FILES := $(LOCAL_MODULE_STEM)
-LOCAL_KERNEL_CONFIG_DATA_PATHS := \
-    3.18.0:$(my_kernel_config_data)/o-mr1/android-3.18 \
-    4.4.0:$(my_kernel_config_data)/o-mr1/android-4.4 \
-    4.9.0:$(my_kernel_config_data)/o-mr1/android-4.9 \
-
-include $(BUILD_FRAMEWORK_COMPATIBILITY_MATRIX)
-
-include $(CLEAR_VARS)
-include $(LOCAL_PATH)/clear_vars.mk
-LOCAL_MODULE := framework_compatibility_matrix.3.xml
-LOCAL_MODULE_STEM := compatibility_matrix.3.xml
-LOCAL_SRC_FILES := $(LOCAL_MODULE_STEM)
-LOCAL_KERNEL_CONFIG_DATA_PATHS := \
-    4.4.107:$(my_kernel_config_data)/p/android-4.4 \
-    4.9.84:$(my_kernel_config_data)/p/android-4.9 \
-    4.14.42:$(my_kernel_config_data)/p/android-4.14 \
-
-include $(BUILD_FRAMEWORK_COMPATIBILITY_MATRIX)
-
-my_kernel_config_data :=
-
 # Framework Compatibility Matrix (common to all FCM versions)
 
 include $(CLEAR_VARS)
@@ -113,43 +59,42 @@
     PLATFORM_SEPOLICY_VERSION \
     PLATFORM_SEPOLICY_COMPAT_VERSIONS
 
-LOCAL_ASSEMBLE_VINTF_ENV_VARS_OVERRIDE := PRODUCT_ENFORCE_VINTF_MANIFEST=true
-LOCAL_ASSEMBLE_VINTF_ERROR_MESSAGE := \
-    "Error: DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX cannot contain required HALs."
-
 include $(BUILD_FRAMEWORK_COMPATIBILITY_MATRIX)
 
-# Framework Compatibility Matrix
-
-include $(CLEAR_VARS)
-include $(LOCAL_PATH)/clear_vars.mk
-LOCAL_MODULE := framework_compatibility_matrix.xml
-LOCAL_MODULE_STEM := compatibility_matrix.xml
-LOCAL_MODULE_PATH := $(TARGET_OUT)
-LOCAL_REQUIRED_MODULES := \
+my_system_matrix_deps := \
     framework_compatibility_matrix.legacy.xml \
     framework_compatibility_matrix.1.xml \
     framework_compatibility_matrix.2.xml \
     framework_compatibility_matrix.3.xml \
+    framework_compatibility_matrix.current.xml \
     framework_compatibility_matrix.device.xml
+
+# Phony target that installs all framework compatibility matrix files
+include $(CLEAR_VARS)
+LOCAL_MODULE := framework_compatibility_matrix.xml
+LOCAL_REQUIRED_MODULES := $(my_system_matrix_deps)
+include $(BUILD_PHONY_PACKAGE)
+
+# Final Framework Compatibility Matrix for OTA
+include $(CLEAR_VARS)
+include $(LOCAL_PATH)/clear_vars.mk
+LOCAL_MODULE := verified_assembled_system_matrix.xml
+LOCAL_MODULE_PATH := $(PRODUCT_OUT)
+LOCAL_REQUIRED_MODULES := $(my_system_matrix_deps)
 LOCAL_GENERATED_SOURCES := $(call module-installed-files,$(LOCAL_REQUIRED_MODULES))
+LOCAL_ADD_VBMETA_VERSION_OVERRIDE := true
 
 ifdef BUILT_VENDOR_MANIFEST
 LOCAL_GEN_FILE_DEPENDENCIES += $(BUILT_VENDOR_MANIFEST)
 LOCAL_ASSEMBLE_VINTF_FLAGS += -c "$(BUILT_VENDOR_MANIFEST)"
 endif
 
-LOCAL_ASSEMBLE_VINTF_ENV_VARS := PRODUCT_ENFORCE_VINTF_MANIFEST
-
-# TODO(b/65028233): Enforce no "unused HALs" for devices that does not define
-# DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE as well
-ifeq (true,$(strip $(PRODUCT_ENFORCE_VINTF_MANIFEST)))
-ifdef DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE
-LOCAL_ASSEMBLE_VINTF_ENV_VARS_OVERRIDE := VINTF_ENFORCE_NO_UNUSED_HALS=true
-endif
+ifneq ($(PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS),true)
+LOCAL_ASSEMBLE_VINTF_FLAGS += --no-kernel-requirements
 endif
 
 include $(BUILD_FRAMEWORK_COMPATIBILITY_MATRIX)
-BUILT_SYSTEM_COMPATIBILITY_MATRIX := $(LOCAL_BUILT_MODULE)
+BUILT_SYSTEM_MATRIX := $(LOCAL_BUILT_MODULE)
 
+my_system_matrix_deps :=
 BUILD_FRAMEWORK_COMPATIBILITY_MATRIX :=
diff --git a/compatibility_matrices/build/Android.bp b/compatibility_matrices/build/Android.bp
new file mode 100644
index 0000000..42dc886
--- /dev/null
+++ b/compatibility_matrices/build/Android.bp
@@ -0,0 +1,29 @@
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+bootstrap_go_package {
+    name: "vintf-compatibility-matrix-soong-rules",
+    pkgPath: "android/soong/vintf-compatibility-matrix",
+    deps: [
+        "blueprint",
+        "blueprint-proptools",
+        "kernel-config-soong-rules",
+        "soong",
+        "soong-android",
+    ],
+    srcs: [
+        "vintf_compatibility_matrix.go",
+    ],
+    pluginFor: ["soong_build"],
+}
diff --git a/compatibility_matrices/build/vintf_compatibility_matrix.go b/compatibility_matrices/build/vintf_compatibility_matrix.go
new file mode 100644
index 0000000..e48f993
--- /dev/null
+++ b/compatibility_matrices/build/vintf_compatibility_matrix.go
@@ -0,0 +1,132 @@
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package vintf
+
+import (
+	"fmt"
+	"io"
+	"strings"
+
+	"github.com/google/blueprint"
+	"github.com/google/blueprint/proptools"
+
+	"android/soong/android"
+	"android/soong/kernel/configs"
+)
+
+type dependencyTag struct {
+	blueprint.BaseDependencyTag
+	name string
+}
+
+var (
+	pctx = android.NewPackageContext("android/vintf")
+
+	assembleVintfRule = pctx.AndroidStaticRule("assemble_vintf", blueprint.RuleParams{
+		Command:     `${assembleVintfCmd} -i ${inputs} -o ${out}`,
+		CommandDeps: []string{"${assembleVintfCmd}"},
+		Description: "assemble_vintf -i ${inputs}",
+	}, "inputs")
+
+	kernelConfigTag = dependencyTag{name: "kernel-config"}
+)
+
+const (
+	relpath = "vintf"
+)
+
+type vintfCompatibilityMatrixProperties struct {
+	// set the name of the output
+	Stem *string
+
+	// list of source compatibility matrix XML files
+	Srcs []string
+
+	// list of kernel_config modules to be combined to final output
+	Kernel_configs []string
+}
+
+type vintfCompatibilityMatrixRule struct {
+	android.ModuleBase
+	properties vintfCompatibilityMatrixProperties
+
+	genFile android.WritablePath
+}
+
+func init() {
+	pctx.HostBinToolVariable("assembleVintfCmd", "assemble_vintf")
+	android.RegisterModuleType("vintf_compatibility_matrix", vintfCompatibilityMatrixFactory)
+}
+
+func vintfCompatibilityMatrixFactory() android.Module {
+	g := &vintfCompatibilityMatrixRule{}
+	g.AddProperties(&g.properties)
+	android.InitAndroidArchModule(g, android.DeviceSupported, android.MultilibCommon)
+	return g
+}
+
+var _ android.AndroidMkDataProvider = (*vintfCompatibilityMatrixRule)(nil)
+
+func (g *vintfCompatibilityMatrixRule) DepsMutator(ctx android.BottomUpMutatorContext) {
+	android.ExtractSourcesDeps(ctx, g.properties.Srcs)
+	ctx.AddDependency(ctx.Module(), kernelConfigTag, g.properties.Kernel_configs...)
+}
+
+func (g *vintfCompatibilityMatrixRule) GenerateAndroidBuildActions(ctx android.ModuleContext) {
+
+	outputFilename := proptools.String(g.properties.Stem)
+	if outputFilename == "" {
+		outputFilename = g.Name()
+	}
+
+	inputPaths := android.PathsForModuleSrc(ctx, g.properties.Srcs)
+	ctx.VisitDirectDepsWithTag(kernelConfigTag, func(m android.Module) {
+		if k, ok := m.(*configs.KernelConfigRule); ok {
+			inputPaths = append(inputPaths, k.OutputPath())
+		} else {
+			ctx.PropertyErrorf("kernel_config",
+				"module %q is not a kernel_config", ctx.OtherModuleName(m))
+		}
+	})
+
+	g.genFile = android.PathForModuleGen(ctx, outputFilename)
+
+	ctx.Build(pctx, android.BuildParams{
+		Rule:        assembleVintfRule,
+		Description: "Framework Compatibility Matrix",
+		Implicits:   inputPaths,
+		Output:      g.genFile,
+		Args: map[string]string{
+			"inputs": strings.Join(inputPaths.Strings(), ":"),
+		},
+	})
+
+	ctx.InstallFile(android.PathForModuleInstall(ctx, "etc", relpath), outputFilename, g.genFile)
+}
+
+func (g *vintfCompatibilityMatrixRule) AndroidMk() android.AndroidMkData {
+	return android.AndroidMkData{
+		Class:      "ETC",
+		OutputFile: android.OptionalPathForPath(g.genFile),
+		Extra: []android.AndroidMkExtraFunc{
+			func(w io.Writer, outputFile android.Path) {
+				fmt.Fprintln(w, "LOCAL_MODULE_RELATIVE_PATH :=", relpath)
+				if proptools.String(g.properties.Stem) != "" {
+					fmt.Fprintln(w, "LOCAL_MODULE_STEM :=", proptools.String(g.properties.Stem))
+				}
+			},
+		},
+	}
+}
diff --git a/compatibility_matrices/clear_vars.mk b/compatibility_matrices/clear_vars.mk
index 8fde301..0e53885 100644
--- a/compatibility_matrices/clear_vars.mk
+++ b/compatibility_matrices/clear_vars.mk
@@ -16,6 +16,7 @@
 
 # Clear input variables to BUILD_FRAMEWORK_COMPATIBILITY_MATRIX
 LOCAL_ADD_VBMETA_VERSION :=
+LOCAL_ADD_VBMETA_VERSION_OVERRIDE :=
 LOCAL_ASSEMBLE_VINTF_ENV_VARS :=
 LOCAL_ASSEMBLE_VINTF_ENV_VARS_OVERRIDE :=
 LOCAL_ASSEMBLE_VINTF_ERROR_MESSAGE :=
diff --git a/compatibility_matrices/compatibility_matrix.1.xml b/compatibility_matrices/compatibility_matrix.1.xml
index 6ba87c0..d82829d 100644
--- a/compatibility_matrices/compatibility_matrix.1.xml
+++ b/compatibility_matrices/compatibility_matrix.1.xml
@@ -158,6 +158,10 @@
     <hal format="hidl" optional="true">
         <name>android.hardware.ir</name>
         <version>1.0</version>
+        <interface>
+            <name>IConsumerIr</name>
+            <instance>default</instance>
+        </interface>
     </hal>
     <hal format="hidl" optional="false">
         <name>android.hardware.keymaster</name>
diff --git a/compatibility_matrices/compatibility_matrix.2.xml b/compatibility_matrices/compatibility_matrix.2.xml
index ea8dde8..98e6cfa 100644
--- a/compatibility_matrices/compatibility_matrix.2.xml
+++ b/compatibility_matrices/compatibility_matrix.2.xml
@@ -166,6 +166,10 @@
     <hal format="hidl" optional="true">
         <name>android.hardware.ir</name>
         <version>1.0</version>
+        <interface>
+            <name>IConsumerIr</name>
+            <instance>default</instance>
+        </interface>
     </hal>
     <hal format="hidl" optional="false">
         <name>android.hardware.keymaster</name>
diff --git a/compatibility_matrices/compatibility_matrix.3.xml b/compatibility_matrices/compatibility_matrix.3.xml
index 9c6b12a..e13d293 100644
--- a/compatibility_matrices/compatibility_matrix.3.xml
+++ b/compatibility_matrices/compatibility_matrix.3.xml
@@ -218,6 +218,10 @@
     <hal format="hidl" optional="true">
         <name>android.hardware.ir</name>
         <version>1.0</version>
+        <interface>
+            <name>IConsumerIr</name>
+            <instance>default</instance>
+        </interface>
     </hal>
     <hal format="hidl" optional="false">
         <name>android.hardware.keymaster</name>
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
new file mode 100644
index 0000000..0bd297b
--- /dev/null
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -0,0 +1,482 @@
+<compatibility-matrix version="1.0" type="framework" level="4">
+    <hal format="hidl" optional="false">
+        <name>android.hardware.atrace</name>
+        <version>1.0</version>
+        <interface>
+            <name>IAtraceDevice</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.audio</name>
+        <version>4.0</version>
+        <interface>
+            <name>IDevicesFactory</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.audio.effect</name>
+        <version>4.0</version>
+        <interface>
+            <name>IEffectsFactory</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.authsecret</name>
+        <version>1.0</version>
+        <interface>
+            <name>IAuthSecret</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.automotive.audiocontrol</name>
+        <version>1.0</version>
+        <interface>
+            <name>IAudioControl</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.automotive.evs</name>
+        <version>1.0</version>
+        <interface>
+            <name>IEvsEnumerator</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.automotive.vehicle</name>
+        <version>2.0</version>
+        <interface>
+            <name>IVehicle</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.biometrics.fingerprint</name>
+        <version>2.1</version>
+        <interface>
+            <name>IBiometricsFingerprint</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.bluetooth</name>
+        <version>1.0</version>
+        <interface>
+            <name>IBluetoothHci</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.bluetooth.a2dp</name>
+        <version>1.0</version>
+        <interface>
+            <name>IBluetoothAudioOffload</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.boot</name>
+        <version>1.0</version>
+        <interface>
+            <name>IBootControl</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.broadcastradio</name>
+        <version>1.0-1</version>
+        <interface>
+            <name>IBroadcastRadioFactory</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.camera.provider</name>
+        <version>2.4</version>
+        <interface>
+            <name>ICameraProvider</name>
+            <regex-instance>[^/]+/[0-9]+</regex-instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.cas</name>
+        <version>1.0</version>
+        <interface>
+            <name>IMediaCasService</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.configstore</name>
+        <version>1.1</version>
+        <interface>
+            <name>ISurfaceFlingerConfigs</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.confirmationui</name>
+        <version>1.0</version>
+        <interface>
+            <name>IConfirmationUI</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.contexthub</name>
+        <version>1.0</version>
+        <interface>
+            <name>IContexthub</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.drm</name>
+        <version>1.0</version>
+        <interface>
+            <name>ICryptoFactory</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+        <interface>
+            <name>IDrmFactory</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.drm</name>
+        <version>1.1</version>
+        <interface>
+            <name>ICryptoFactory</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+        <interface>
+            <name>IDrmFactory</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.dumpstate</name>
+        <version>1.0</version>
+        <interface>
+            <name>IDumpstateDevice</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.gatekeeper</name>
+        <version>1.0</version>
+        <interface>
+            <name>IGatekeeper</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.gnss</name>
+        <version>1.0-1</version>
+        <interface>
+            <name>IGnss</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.graphics.allocator</name>
+        <version>2.0</version>
+        <interface>
+            <name>IAllocator</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.graphics.composer</name>
+        <version>2.1</version>
+        <interface>
+            <name>IComposer</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.graphics.mapper</name>
+        <version>2.0</version>
+        <interface>
+            <name>IMapper</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.health</name>
+        <version>2.0</version>
+        <interface>
+            <name>IHealth</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.health.filesystem</name>
+        <version>1.0</version>
+        <interface>
+            <name>IFileSystem</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.ir</name>
+        <version>1.0</version>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.keymaster</name>
+        <version>3.0</version>
+        <version>4.0</version>
+        <interface>
+            <name>IKeymasterDevice</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.keymaster</name>
+        <version>4.0</version>
+        <interface>
+            <name>IKeymasterDevice</name>
+            <instance>strongbox</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.light</name>
+        <version>2.0</version>
+        <interface>
+            <name>ILight</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="false">
+        <name>android.hardware.media.omx</name>
+        <version>1.0</version>
+        <interface>
+            <name>IOmx</name>
+            <instance>default</instance>
+        </interface>
+        <interface>
+            <name>IOmxStore</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.memtrack</name>
+        <version>1.0</version>
+        <interface>
+            <name>IMemtrack</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.neuralnetworks</name>
+        <version>1.0-2</version>
+        <interface>
+            <name>IDevice</name>
+            <regex-instance>.*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.nfc</name>
+        <version>1.1</version>
+        <interface>
+            <name>INfc</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.oemlock</name>
+        <version>1.0</version>
+        <interface>
+            <name>IOemLock</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.power</name>
+        <version>1.0-3</version>
+        <interface>
+            <name>IPower</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.power.stats</name>
+        <version>1.0</version>
+        <interface>
+            <name>IPowerStats</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.radio</name>
+        <version>1.0-2</version>
+        <interface>
+            <name>IRadio</name>
+            <instance>slot1</instance>
+            <instance>slot2</instance>
+            <instance>slot3</instance>
+        </interface>
+        <interface>
+            <name>ISap</name>
+            <instance>slot1</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.radio.config</name>
+        <version>1.0</version>
+        <interface>
+            <name>IRadioConfig</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.renderscript</name>
+        <version>1.0</version>
+        <interface>
+            <name>IDevice</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.secure_element</name>
+        <version>1.0</version>
+        <interface>
+            <name>ISecureElement</name>
+            <regex-instance>eSE[1-9][0-9]*</regex-instance>
+            <regex-instance>SIM[1-9][0-9]*</regex-instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.sensors</name>
+        <version>1.0</version>
+        <interface>
+            <name>ISensors</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.soundtrigger</name>
+        <version>2.0-1</version>
+        <interface>
+            <name>ISoundTriggerHw</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.tetheroffload.config</name>
+        <version>1.0</version>
+        <interface>
+            <name>IOffloadConfig</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.tetheroffload.control</name>
+        <version>1.0</version>
+        <interface>
+            <name>IOffloadControl</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.thermal</name>
+        <version>1.0-1</version>
+        <interface>
+            <name>IThermal</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.tv.cec</name>
+        <version>1.0</version>
+        <interface>
+            <name>IHdmiCec</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.tv.input</name>
+        <version>1.0</version>
+        <interface>
+            <name>ITvInput</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.usb</name>
+        <version>1.0-1</version>
+        <interface>
+            <name>IUsb</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.usb.gadget</name>
+        <version>1.0</version>
+        <interface>
+            <name>IUsbGadget</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.vibrator</name>
+        <version>1.0-2</version>
+        <interface>
+            <name>IVibrator</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.vr</name>
+        <version>1.0</version>
+        <interface>
+            <name>IVr</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.weaver</name>
+        <version>1.0</version>
+        <interface>
+            <name>IWeaver</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.wifi</name>
+        <version>1.0-2</version>
+        <interface>
+            <name>IWifi</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.wifi.hostapd</name>
+        <version>1.0</version>
+        <interface>
+            <name>IHostapd</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.wifi.offload</name>
+        <version>1.0</version>
+        <interface>
+            <name>IOffload</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+    <hal format="hidl" optional="true">
+        <name>android.hardware.wifi.supplicant</name>
+        <version>1.0-1</version>
+        <interface>
+            <name>ISupplicant</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+</compatibility-matrix>
diff --git a/compatibility_matrices/compatibility_matrix.legacy.xml b/compatibility_matrices/compatibility_matrix.legacy.xml
index 6792598..224811f 100644
--- a/compatibility_matrices/compatibility_matrix.legacy.xml
+++ b/compatibility_matrices/compatibility_matrix.legacy.xml
@@ -158,6 +158,10 @@
     <hal format="hidl" optional="true">
         <name>android.hardware.ir</name>
         <version>1.0</version>
+        <interface>
+            <name>IConsumerIr</name>
+            <instance>default</instance>
+        </interface>
     </hal>
     <hal format="hidl" optional="false">
         <name>android.hardware.keymaster</name>
diff --git a/compatibility_matrices/compatibility_matrix.mk b/compatibility_matrices/compatibility_matrix.mk
index 1b6fd3b..bafc84b 100644
--- a/compatibility_matrices/compatibility_matrix.mk
+++ b/compatibility_matrices/compatibility_matrix.mk
@@ -32,7 +32,7 @@
 #       assemble_vintf invocation. Format is "VINTF_ENFORCE_NO_UNUSED_HALS=true".
 # LOCAL_ASSEMBLE_VINTF_FLAGS: Add additional command line arguments to assemble_vintf invocation.
 # LOCAL_KERNEL_CONFIG_DATA_PATHS: Paths to search for kernel config requirements. Format for each is
-#       <kernel version x.y.z>:<path that contains android-base*.cfg>.
+#       <kernel version x.y.z>:<path that contains android-base*.config>.
 # LOCAL_GEN_FILE_DEPENDENCIES: A list of additional dependencies for the generated file.
 
 ifndef LOCAL_MODULE
@@ -77,13 +77,20 @@
 $(GEN): PRIVATE_ENV_VARS += FRAMEWORK_VBMETA_VERSION
 endif # LOCAL_ADD_VBMETA_VERSION
 
+ifeq (true,$(strip $(LOCAL_ADD_VBMETA_VERSION_OVERRIDE)))
+ifneq ($(BOARD_OTA_FRAMEWORK_VBMETA_VERSION_OVERRIDE),)
+$(GEN): FRAMEWORK_VBMETA_VERSION_OVERRIDE := $(BOARD_OTA_FRAMEWORK_VBMETA_VERSION_OVERRIDE)
+$(GEN): PRIVATE_ENV_VARS += FRAMEWORK_VBMETA_VERSION_OVERRIDE
+endif
+endif
+
 ifneq (,$(strip $(LOCAL_KERNEL_CONFIG_DATA_PATHS)))
 $(GEN): PRIVATE_KERNEL_CONFIG_DATA_PATHS := $(LOCAL_KERNEL_CONFIG_DATA_PATHS)
-$(GEN): $(foreach pair,$(PRIVATE_KERNEL_CONFIG_DATA_PATHS),\
-    $(wildcard $(call word-colon,2,$(pair))/android-base*.cfg))
+$(GEN): $(foreach pair,$(LOCAL_KERNEL_CONFIG_DATA_PATHS),\
+    $(wildcard $(call word-colon,2,$(pair))/android-base*.config))
 $(GEN): PRIVATE_FLAGS += $(foreach pair,$(PRIVATE_KERNEL_CONFIG_DATA_PATHS),\
 	--kernel=$(call word-colon,1,$(pair)):$(call normalize-path-list,\
-		$(wildcard $(call word-colon,2,$(pair))/android-base*.cfg)))
+		$(wildcard $(call word-colon,2,$(pair))/android-base*.config)))
 endif
 
 my_matrix_src_files := \
diff --git a/configstore/1.0/ISurfaceFlingerConfigs.hal b/configstore/1.0/ISurfaceFlingerConfigs.hal
index 5f975bd..1de7570 100644
--- a/configstore/1.0/ISurfaceFlingerConfigs.hal
+++ b/configstore/1.0/ISurfaceFlingerConfigs.hal
@@ -61,11 +61,16 @@
     hasWideColorDisplay() generates (OptionalBool value);
 
     /**
-     * hwHdrDisplay indicates that the device has
-     * or can support an HDR (High Dynamic Range) display.
-     * Typically an HDR display is also wide-color.
+     * hwHDRDisplay indicates that the device has an High Dynamic Range display.
+     * A display is considered High Dynamic Range if it
+     *
+     *     1. is a wide color gamut display, typically DCI-P3 or lager
+     *     2. has high luminance capability, typically 540 nits or higher at 10% OPR
+     *
      * Indicate support for this feature by setting
      * TARGET_HAS_HDR_DISPLAY to true in BoardConfig.mk
+     * TARGET_HAS_WIDE_COLOR_DISPLAY must be set to true when
+     * TARGET_HAS_HDR_DISPLAY is true.
      */
     hasHDRDisplay() generates (OptionalBool value);
 
diff --git a/configstore/1.0/vts/functional/Android.bp b/configstore/1.0/vts/functional/Android.bp
index 1b8a591..008b59d 100644
--- a/configstore/1.0/vts/functional/Android.bp
+++ b/configstore/1.0/vts/functional/Android.bp
@@ -19,5 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalConfigstoreV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.configstore@1.0"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/configstore/1.1/default/seccomp_policy/configstore@1.1-arm64.policy b/configstore/1.1/default/seccomp_policy/configstore@1.1-arm64.policy
index d523a1a..937fddd 100644
--- a/configstore/1.1/default/seccomp_policy/configstore@1.1-arm64.policy
+++ b/configstore/1.1/default/seccomp_policy/configstore@1.1-arm64.policy
@@ -44,6 +44,7 @@
 madvise: 1
 getdents64: 1
 clock_gettime: 1
+getpid: 1
 
 # used during process crash by crash_dump to dump process info
 rt_sigprocmask: 1
diff --git a/configstore/1.1/default/surfaceflinger.mk b/configstore/1.1/default/surfaceflinger.mk
index 51f06e1..35922eb 100644
--- a/configstore/1.1/default/surfaceflinger.mk
+++ b/configstore/1.1/default/surfaceflinger.mk
@@ -9,14 +9,6 @@
     LOCAL_CFLAGS += -DSF_VSYNC_EVENT_PHASE_OFFSET_NS=$(SF_VSYNC_EVENT_PHASE_OFFSET_NS)
 endif
 
-ifeq ($(TARGET_BOARD_PLATFORM),omap4)
-    LOCAL_CFLAGS += -DUSE_CONTEXT_PRIORITY=1
-endif
-
-ifeq ($(TARGET_BOARD_PLATFORM),s5pc110)
-    LOCAL_CFLAGS += -DUSE_CONTEXT_PRIORITY=1
-endif
-
 ifeq ($(TARGET_USE_CONTEXT_PRIORITY),true)
     LOCAL_CFLAGS += -DUSE_CONTEXT_PRIORITY=1
 endif
diff --git a/configstore/README.md b/configstore/README.md
new file mode 100644
index 0000000..3e8a24e
--- /dev/null
+++ b/configstore/README.md
@@ -0,0 +1 @@
+Configstore is specifically the configuration for surface flinger. Other configurations go in other packages.
diff --git a/configstore/utils/Android.bp b/configstore/utils/Android.bp
index cb4e6eb..178f245 100644
--- a/configstore/utils/Android.bp
+++ b/configstore/utils/Android.bp
@@ -20,6 +20,7 @@
     vndk: {
         enabled: true,
     },
+    double_loadable: true,
     defaults: ["hidl_defaults"],
 
     srcs: [ "ConfigStoreUtils.cpp" ],
diff --git a/confirmationui/1.0/vts/functional/Android.bp b/confirmationui/1.0/vts/functional/Android.bp
index 823e035..d19d702 100644
--- a/confirmationui/1.0/vts/functional/Android.bp
+++ b/confirmationui/1.0/vts/functional/Android.bp
@@ -27,4 +27,5 @@
         "libcn-cbor",
         "android.hardware.confirmationui-support-lib",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/confirmationui/support/Android.bp b/confirmationui/support/Android.bp
index 62156b3..e215baa 100644
--- a/confirmationui/support/Android.bp
+++ b/confirmationui/support/Android.bp
@@ -46,6 +46,7 @@
         "android.hardware.keymaster@4.0",
         "libhidlbase",
     ],
+    test_suites: ["general-tests"],
     clang: true,
     cflags: [ "-O0" ],
 }
diff --git a/confirmationui/support/src/cbor.cpp b/confirmationui/support/src/cbor.cpp
index e7ea164..3685521 100644
--- a/confirmationui/support/src/cbor.cpp
+++ b/confirmationui/support/src/cbor.cpp
@@ -36,11 +36,14 @@
             *pos++ = getByte(value, 6);
             *pos++ = getByte(value, 5);
             *pos++ = getByte(value, 4);
+            [[fallthrough]];
         case 4:
             *pos++ = getByte(value, 3);
             *pos++ = getByte(value, 2);
+            [[fallthrough]];
         case 2:
             *pos++ = getByte(value, 1);
+            [[fallthrough]];
         case 1:
             *pos++ = value;
             break;
diff --git a/contexthub/1.0/vts/functional/Android.bp b/contexthub/1.0/vts/functional/Android.bp
index 7c6e8c7..aef0340 100644
--- a/contexthub/1.0/vts/functional/Android.bp
+++ b/contexthub/1.0/vts/functional/Android.bp
@@ -19,5 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalContexthubV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.contexthub@1.0"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/contexthub/1.0/vts/functional/VtsHalContexthubV1_0TargetTest.cpp b/contexthub/1.0/vts/functional/VtsHalContexthubV1_0TargetTest.cpp
index 7492152..629477a 100644
--- a/contexthub/1.0/vts/functional/VtsHalContexthubV1_0TargetTest.cpp
+++ b/contexthub/1.0/vts/functional/VtsHalContexthubV1_0TargetTest.cpp
@@ -83,7 +83,7 @@
     sp<IContexthub> hubApi = ::testing::VtsHalHidlTargetTestBase::getService<IContexthub>();
 
     if (hubApi != nullptr) {
-      for (ContextHub hub : getHubsSync(hubApi)) {
+      for (const ContextHub& hub : getHubsSync(hubApi)) {
         hubIds.push_back(hub.hubId);
       }
     }
@@ -206,7 +206,7 @@
   hidl_vec<ContextHub> hubs = getHubsSync(hubApi);
   ALOGD("System reports %zu hubs", hubs.size());
 
-  for (ContextHub hub : hubs) {
+  for (const ContextHub& hub : hubs) {
     ALOGD("Checking hub ID %" PRIu32, hub.hubId);
 
     EXPECT_FALSE(hub.name.empty());
diff --git a/current.txt b/current.txt
index 4f574e9..2e57feb 100644
--- a/current.txt
+++ b/current.txt
@@ -384,6 +384,18 @@
 cd4330c3196bda1d642a32abfe23a7d64ebfbda721940643af6867af3b3f0aa9 android.hardware.wifi.supplicant@1.1::ISupplicantStaIfaceCallback
 10ff2fae516346b86121368ce5790d5accdfcb73983246b813f3d488b66db45a android.hardware.wifi.supplicant@1.1::ISupplicantStaNetwork
 
-# ABI preserving changes to HALs after Android P
-1d19720d4fd38b1095f0f555a4bd92b3b12c9b1d0f560b0e9a474cd6dcc20db6 android.hardware.radio@1.2::IRadio
+# ABI preserving changes to HALs during Android Q
+f72d23278af99a2f6a9c1d40352b67dbf1f582282f799f88f7235dc7c13892b5 android.hardware.camera.device@3.2::ICameraDeviceSession
+da33234403ff5d60f3473711917b9948e6484a4260b5247acdafb111193a9de2 android.hardware.configstore@1.0::ISurfaceFlingerConfigs
+21165b8e30c4b2d52980e4728f661420adc16e38bbe73476c06b2085be908f4c android.hardware.gnss@1.0::IGnssCallback
+d702fb01dc2a0733aa820b7eb65435ee3334f75632ef880bafd2fb8803a20a58 android.hardware.gnss@1.0::IGnssMeasurementCallback
+b7ecf29927055ec422ec44bf776223f07d79ad9f92ccf9becf167e62c2607e7a android.hardware.keymaster@4.0::IKeymasterDevice
+574e8f1499436fb4075894dcae0b36682427956ecb114f17f1fe22d116a83c6b android.hardware.neuralnetworks@1.0::IPreparedModel
+1fb32361286b938d48a55c2539c846732afce0b99fe08590f556643125bc13d3 android.hardware.neuralnetworks@1.0::types
+e22e8135d061d0e9c4c1a70c25c19fdba10f4d3cda9795ef25b6392fc520317c android.hardware.neuralnetworks@1.1::types
 1d4a5776614c08b5d794a5ec5ab04697260cbd4b3441d5935cd53ee71d19da02 android.hardware.radio@1.0::IRadioResponse
+271187e261b30c01a33011aea257c07a2d2f05b72943ebee89e973e997849973 android.hardware.radio@1.0::types
+1d19720d4fd38b1095f0f555a4bd92b3b12c9b1d0f560b0e9a474cd6dcc20db6 android.hardware.radio@1.2::IRadio
+e78cf871f9fd1c072874e481e06e18e2681763cf2aa38c1fd777d53bab4eb69b android.hardware.sensors@1.0::types
+1722ad002317b1fae1400de709e90f442d94ef22864e05f7a12af48c32e8edc8 android.hardware.usb@1.1::types
+29c8da7a13c40d488f569c812441d5754ee45bdcdb8ce6564f524b708d10a057 android.hardware.vibrator@1.1::types
diff --git a/drm/1.0/default/DrmFactory.cpp b/drm/1.0/default/DrmFactory.cpp
index 7e5d998..05951d7 100644
--- a/drm/1.0/default/DrmFactory.cpp
+++ b/drm/1.0/default/DrmFactory.cpp
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2016 The Android Open Source Project
-` *
+ *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
diff --git a/drm/1.0/default/LegacyPluginPath.cpp b/drm/1.0/default/LegacyPluginPath.cpp
index 369059d..d0a8f90 100644
--- a/drm/1.0/default/LegacyPluginPath.cpp
+++ b/drm/1.0/default/LegacyPluginPath.cpp
@@ -16,6 +16,8 @@
 
 #include "LegacyPluginPath.h"
 
+#include <unistd.h>
+
 #include <cutils/properties.h>
 
 namespace android {
@@ -24,12 +26,16 @@
 namespace V1_0 {
 namespace implementation {
 
+// 64-bit DRM depends on OEM libraries that aren't
+// provided for all devices. If the drm hal service
+// is running as 64-bit use the 64-bit libs, otherwise
+// use the 32-bit libs.
 const char* getDrmPluginPath() {
-    if (property_get_bool("drm.64bit.enabled", false)) {
-        return "/vendor/lib64/mediadrm";
-    } else {
-        return "/vendor/lib/mediadrm";
-    }
+#if defined(__LP64__)
+    return "/vendor/lib64/mediadrm";
+#else
+    return "/vendor/lib/mediadrm";
+#endif
 }
 
 }  // namespace implementation
diff --git a/drm/1.0/default/include/PluginLoader.h b/drm/1.0/default/include/PluginLoader.h
index f387b3c..0c45fb3 100644
--- a/drm/1.0/default/include/PluginLoader.h
+++ b/drm/1.0/default/include/PluginLoader.h
@@ -85,7 +85,10 @@
                 libraries.push(library);
                 T* result = createFactoryFunc();
                 return  result;
-           }
+            } else {
+                ALOGE("Failed to lookup symbol %s in library %s: %s",
+                        entry, path, library->lastError());
+            }
         }
         return NULL;
     }
diff --git a/drm/1.0/vts/functional/Android.bp b/drm/1.0/vts/functional/Android.bp
index 57678fb..d6ebfdd 100644
--- a/drm/1.0/vts/functional/Android.bp
+++ b/drm/1.0/vts/functional/Android.bp
@@ -32,4 +32,5 @@
         "libssl",
         "libcrypto",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/drm/1.0/vts/functional/drm_hal_vendor_test.cpp b/drm/1.0/vts/functional/drm_hal_vendor_test.cpp
index d03b2af..20a2ca4 100644
--- a/drm/1.0/vts/functional/drm_hal_vendor_test.cpp
+++ b/drm/1.0/vts/functional/drm_hal_vendor_test.cpp
@@ -177,7 +177,7 @@
 TEST_P(DrmHalVendorFactoryTest, ValidateConfigurations) {
     const char* kVendorStr = "Vendor module ";
     size_t count = 0;
-    for (auto config : contentConfigurations) {
+    for (const auto& config : contentConfigurations) {
         ASSERT_TRUE(config.name.size() > 0) << kVendorStr << "has no name";
         ASSERT_TRUE(config.serverUrl.size() > 0) << kVendorStr
                                                  << "has no serverUrl";
@@ -186,7 +186,7 @@
         ASSERT_TRUE(config.mimeType.size() > 0) << kVendorStr
                                                 << "has no mime type";
         ASSERT_TRUE(config.keys.size() >= 1) << kVendorStr << "has no keys";
-        for (auto key : config.keys) {
+        for (const auto& key : config.keys) {
             ASSERT_TRUE(key.keyId.size() > 0) << kVendorStr
                                               << " has zero length keyId";
             ASSERT_TRUE(key.keyId.size() > 0) << kVendorStr
@@ -245,7 +245,7 @@
  */
 TEST_P(DrmHalVendorFactoryTest, ValidContentTypeSupported) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
+    for (const auto& config : contentConfigurations) {
         EXPECT_TRUE(drmFactory->isContentTypeSupported(config.mimeType));
     }
 }
@@ -610,7 +610,7 @@
  */
 TEST_P(DrmHalVendorPluginTest, RestoreKeys) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
+    for (const auto& config : contentConfigurations) {
         if (config.policy.allowOffline) {
             auto sessionId = openSession();
             hidl_vec<uint8_t> keySetId =
@@ -645,7 +645,7 @@
  */
 TEST_P(DrmHalVendorPluginTest, RestoreKeysClosedSession) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
+    for (const auto& config : contentConfigurations) {
         if (config.policy.allowOffline) {
             auto sessionId = openSession();
             hidl_vec<uint8_t> keySetId =
@@ -1022,8 +1022,8 @@
  */
 TEST_P(DrmHalVendorPluginTest, RequiresSecureDecoderConfig) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
-        for (auto key : config.keys) {
+    for (const auto& config : contentConfigurations) {
+        for (const auto& key : config.keys) {
             if (key.isSecure) {
                 EXPECT_TRUE(cryptoPlugin->requiresSecureDecoderComponent(config.mimeType));
                 break;
@@ -1471,7 +1471,7 @@
  */
 TEST_P(DrmHalVendorDecryptTest, QueryKeyStatus) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
+    for (const auto& config : contentConfigurations) {
         auto sessionId = openSession();
         loadKeys(sessionId, config);
         auto keyStatus = queryKeyStatus(sessionId);
@@ -1485,8 +1485,8 @@
  */
 TEST_P(DrmHalVendorDecryptTest, ClearSegmentTest) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
-        for (auto key : config.keys) {
+    for (const auto& config : contentConfigurations) {
+        for (const auto& key : config.keys) {
             const size_t kSegmentSize = 1024;
             vector<uint8_t> iv(AES_BLOCK_SIZE, 0);
             const Pattern noPattern = {0, 0};
@@ -1513,8 +1513,8 @@
  */
 TEST_P(DrmHalVendorDecryptTest, EncryptedAesCtrSegmentTest) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
-        for (auto key : config.keys) {
+    for (const auto& config : contentConfigurations) {
+        for (const auto& key : config.keys) {
             const size_t kSegmentSize = 1024;
             vector<uint8_t> iv(AES_BLOCK_SIZE, 0);
             const Pattern noPattern = {0, 0};
@@ -1540,8 +1540,8 @@
  */
 TEST_P(DrmHalVendorDecryptTest, EncryptedAesCtrSegmentTestNoKeys) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
-        for (auto key : config.keys) {
+    for (const auto& config : contentConfigurations) {
+        for (const auto& key : config.keys) {
             vector<uint8_t> iv(AES_BLOCK_SIZE, 0);
             const Pattern noPattern = {0, 0};
             const vector<SubSample> subSamples = {{.numBytesOfClearData = 256,
@@ -1567,8 +1567,8 @@
  */
 TEST_P(DrmHalVendorDecryptTest, AttemptDecryptWithKeysRemoved) {
     RETURN_IF_SKIPPED;
-    for (auto config : contentConfigurations) {
-        for (auto key : config.keys) {
+    for (const auto& config : contentConfigurations) {
+        for (const auto& key : config.keys) {
             vector<uint8_t> iv(AES_BLOCK_SIZE, 0);
             const Pattern noPattern = {0, 0};
             const vector<SubSample> subSamples = {{.numBytesOfClearData = 256,
diff --git a/drm/1.1/README.md b/drm/1.1/README.md
new file mode 100644
index 0000000..e88e6ab
--- /dev/null
+++ b/drm/1.1/README.md
@@ -0,0 +1,84 @@
+# VINTF Device Manifest
+
+In Android Pie, an `<fqname>` tag was introduced to be able to express multiple
+different versions of the same HAL in VINTF manifests (for DRM)
+in device manifest. For devices launching with previous versions of Android and
+upgrading to Android Pie, the device manifest must not use `<fqname>` to
+satisfy requirements for non-optional HALs, because older version of `libvintf`
+do not recognize it, causing errors during OTA update.
+
+Assuming that the HAL provides `@1.0::I*/default`,
+`@1.1::I*/clearkey` and `@1.1::I*/foo` instances:
+
+## Devices upgrading to Android Pie
+
+### `target-level=1` or `target-level=2`
+
+FCM (framework compatibility matrix) version 2 (released in Android Oreo MR1)
+requires DRM 1.0. If the new device manifest has Target FCM Version (i.e.
+`target-level`) 1 or 2, it should use the following snippet:
+
+```xml
+<hal format="hidl">
+    <name>android.hardware.drm</name>
+    <transport>hwbinder</transport>
+    <version>1.0</version>
+    <interface>
+        <name>ICryptoFactory</name>
+        <instance>default</instance>
+    </interface>
+    <interface>
+        <name>IDrmFactory</name>
+        <instance>default</instance>
+    </interface>
+    <fqname>@1.1::ICryptoFactory/clearkey</fqname>
+    <fqname>@1.1::IDrmFactory/clearkey</fqname>
+    <fqname>@1.1::ICryptoFactory/foo</fqname>
+    <fqname>@1.1::IDrmFactory/foo</fqname>
+</hal>
+```
+
+### `target-level=3`
+
+FCM (framework compatibility matrix) version 3 (released in Android Pie)
+requires DRM 1.1. If the new device manifest has Target FCM Version (i.e.
+`target-level`) 3, it should use the following snippet:
+
+
+```xml
+<hal format="hidl">
+    <name>android.hardware.drm</name>
+    <transport>hwbinder</transport>
+    <version>1.1</version>
+    <interface>
+        <name>ICryptoFactory</name>
+        <instance>clearkey</instance>
+        <instance>foo</instance>
+    </interface>
+    <interface>
+        <name>IDrmFactory</name>
+        <instance>clearkey</instance>
+        <instance>foo</instance>
+    </interface>
+    <fqname>@1.0::ICryptoFactory/default</fqname>
+    <fqname>@1.0::IDrmFactory/default</fqname>
+</hal>
+```
+
+## Devices launching with Android Pie
+If you have a new device launched with Android Pie (no OTA), both of the
+aforementioned snippets can be used. Besides, it is recommended to use the
+new, clearer format:
+
+```xml
+<hal format="hidl">
+    <name>android.hardware.drm</name>
+    <transport>hwbinder</transport>
+    <fqname>@1.0::ICryptoFactory/default</fqname>
+    <fqname>@1.0::IDrmFactory/default</fqname>
+    <fqname>@1.1::ICryptoFactory/clearkey</fqname>
+    <fqname>@1.1::IDrmFactory/clearkey</fqname>
+    <fqname>@1.1::ICryptoFactory/foo</fqname>
+    <fqname>@1.1::IDrmFactory/foo</fqname>
+</hal>
+```
diff --git a/drm/1.1/vts/functional/Android.bp b/drm/1.1/vts/functional/Android.bp
index 782f283..1090b69 100644
--- a/drm/1.1/vts/functional/Android.bp
+++ b/drm/1.1/vts/functional/Android.bp
@@ -31,4 +31,5 @@
         "libssl",
         "libcrypto",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/drm/1.1/vts/functional/drm_hal_clearkey_test.cpp b/drm/1.1/vts/functional/drm_hal_clearkey_test.cpp
index 1246616..7dedd7f 100644
--- a/drm/1.1/vts/functional/drm_hal_clearkey_test.cpp
+++ b/drm/1.1/vts/functional/drm_hal_clearkey_test.cpp
@@ -228,13 +228,13 @@
                                       const std::string& componentName, const VT& componentValue) {
      bool validAttribute = false;
      bool validComponent = false;
-     for (DrmMetricGroup::Attribute attribute : metric.attributes) {
+     for (const DrmMetricGroup::Attribute& attribute : metric.attributes) {
          if (attribute.name == attributeName &&
              ValueEquals(attribute.type, attributeValue, attribute)) {
              validAttribute = true;
          }
      }
-     for (DrmMetricGroup::Value value : metric.values) {
+     for (const DrmMetricGroup::Value& value : metric.values) {
          if (value.componentName == componentName &&
              ValueEquals(value.type, componentValue, value)) {
              validComponent = true;
diff --git a/dumpstate/1.0/Android.bp b/dumpstate/1.0/Android.bp
index bc704f1..29be116 100644
--- a/dumpstate/1.0/Android.bp
+++ b/dumpstate/1.0/Android.bp
@@ -12,6 +12,6 @@
     interfaces: [
         "android.hidl.base@1.0",
     ],
-    gen_java: false,
+    gen_java: true,
 }
 
diff --git a/dumpstate/1.0/default/DumpstateDevice.cpp b/dumpstate/1.0/default/DumpstateDevice.cpp
index 818a531..25d92b0 100644
--- a/dumpstate/1.0/default/DumpstateDevice.cpp
+++ b/dumpstate/1.0/default/DumpstateDevice.cpp
@@ -18,6 +18,7 @@
 
 #include "DumpstateDevice.h"
 
+#include <hidl/HidlBinderSupport.h>
 #include <log/log.h>
 
 #include "DumpstateUtil.h"
@@ -34,8 +35,12 @@
 // Methods from ::android::hardware::dumpstate::V1_0::IDumpstateDevice follow.
 Return<void> DumpstateDevice::dumpstateBoard(const hidl_handle& handle) {
     // NOTE: this is just an example on how to use the DumpstateUtil.h functions to implement
-    // this interface - since HIDL_FETCH_IDumpstateDevice() is not defined, this function will never
-    // be called by dumpstate.
+    // this interface.
+
+    // Exit when dump is completed since this is a lazy HAL.
+    addPostCommandTask([]() {
+        exit(0);
+    });
 
     if (handle == nullptr || handle->numFds < 1) {
         ALOGE("no FDs\n");
diff --git a/dumpstate/1.0/default/android.hardware.dumpstate@1.0-service.rc b/dumpstate/1.0/default/android.hardware.dumpstate@1.0-service.rc
index dfc7d78..062a291 100644
--- a/dumpstate/1.0/default/android.hardware.dumpstate@1.0-service.rc
+++ b/dumpstate/1.0/default/android.hardware.dumpstate@1.0-service.rc
@@ -3,3 +3,5 @@
     user system
     group system
     interface android.hardware.dumpstate@1.0::IDumpstateDevice default
+    oneshot
+    disabled
diff --git a/dumpstate/1.0/vts/functional/Android.bp b/dumpstate/1.0/vts/functional/Android.bp
index 1ab530f..fc64d05 100644
--- a/dumpstate/1.0/vts/functional/Android.bp
+++ b/dumpstate/1.0/vts/functional/Android.bp
@@ -18,4 +18,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalDumpstateV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.dumpstate@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/fastboot/1.0/Android.bp b/fastboot/1.0/Android.bp
new file mode 100644
index 0000000..467fc6d
--- /dev/null
+++ b/fastboot/1.0/Android.bp
@@ -0,0 +1,23 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.fastboot@1.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IFastboot.hal",
+    ],
+    interfaces: [
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "FileSystemType",
+        "Result",
+        "Status",
+    ],
+    gen_java: true,
+}
+
diff --git a/fastboot/1.0/IFastboot.hal b/fastboot/1.0/IFastboot.hal
new file mode 100644
index 0000000..dce3ad7
--- /dev/null
+++ b/fastboot/1.0/IFastboot.hal
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.fastboot@1.0;
+
+/**
+ * IFastboot interface implements vendor specific fastboot commands.
+ */
+interface IFastboot {
+    /**
+     * Returns the file system type of the partition. This is only required for
+     * physical partitions that need to be wiped and reformatted.
+     *
+     * @return type Can be ext4, f2fs or raw.
+     * @return result SUCCESS if the operation is successful,
+     *     FAILURE_UNKNOWN if the partition is invalid or does not require
+     *     reformatting.
+     */
+    getPartitionType(string partitionName) generates (FileSystemType type, Result result);
+
+    /**
+     * Executes a fastboot OEM command.
+     *
+     * @param oemCmdArgs The oem command that is passed to the fastboot HAL.
+     * @return result Returns the status SUCCESS if the operation is successful,
+     *     INVALID_ARGUMENT for bad arguments,
+     *     FAILURE_UNKNOWN for an invalid/unsupported command.
+     */
+    doOemCommand(string oemCmd) generates (Result result);
+
+    /**
+     * Returns an OEM-defined string indicating the variant of the device, for
+     * example, US and ROW.
+     *
+     * @return variant Indicates the device variant.
+     * @return result Returns the status SUCCESS if the operation is successful,
+     *     FAILURE_UNKNOWN otherwise.
+     */
+    getVariant() generates (string variant, Result result);
+
+    /**
+     * Returns whether off-mode-charging is enabled. If enabled, the device
+     * autoboots into a special mode when power is applied.
+     *
+     * @return state Returns whether off mode charging is enabled.
+     * @return result Returns the status SUCCESS if the operation is successful,
+     *     FAILURE_UNKNOWN otherwise.
+     */
+    getOffModeChargeState() generates (bool state, Result result);
+
+    /**
+     * Returns the minimum battery voltage required for flashing in mV.
+     *
+     * @return batteryVoltage Minimum batterery voltage (in mV) required for
+     *     flashing to be successful.
+     * @return result Returns the status SUCCESS if the operation is successful,
+     *     FAILURE_UNKNOWN otherwise.
+     */
+    getBatteryVoltageFlashingThreshold() generates (int32_t batteryVoltage, Result result);
+};
diff --git a/fastboot/1.0/types.hal b/fastboot/1.0/types.hal
new file mode 100644
index 0000000..3fbe639
--- /dev/null
+++ b/fastboot/1.0/types.hal
@@ -0,0 +1,61 @@
+/**
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.fastboot@1.0;
+
+enum Status : uint32_t {
+    /**
+     * Operation completed without errors.
+     */
+    SUCCESS,
+    /**
+     * Unsupported operation.
+     */
+    NOT_SUPPORTED,
+    /**
+     * Bad argument.
+     */
+    INVALID_ARGUMENT,
+    /**
+     * Operation failed due to unknown reason.
+     */
+    FAILURE_UNKNOWN
+};
+
+enum FileSystemType : uint8_t {
+    /**
+     * Fourth extended file system.
+     */
+    EXT4,
+    /**
+     * Flash Friendly File System.
+     */
+    F2FS,
+    /**
+     * Raw file system.
+     */
+    RAW
+};
+
+struct Result {
+    Status status;
+    /**
+     * Message pertaining to the status. It must be a failure message for
+     * Status FAILURE_UNKNOWN/NOT_SUPPORTED or an informative message for
+     * Status SUCCESS.
+     */
+    string message;
+};
diff --git a/gatekeeper/1.0/vts/functional/Android.bp b/gatekeeper/1.0/vts/functional/Android.bp
index aa1da7b..f55e5d2 100644
--- a/gatekeeper/1.0/vts/functional/Android.bp
+++ b/gatekeeper/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalGatekeeperV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.gatekeeper@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/gnss/1.0/IGnssCallback.hal b/gnss/1.0/IGnssCallback.hal
index 7fb38c5..d62676f 100644
--- a/gnss/1.0/IGnssCallback.hal
+++ b/gnss/1.0/IGnssCallback.hal
@@ -115,9 +115,9 @@
         /**
          * Carrier frequency of the signal tracked, for example it can be the
          * GPS central frequency for L1 = 1575.45 MHz, or L2 = 1227.60 MHz, L5 =
-         * 1176.45 MHz, varying GLO channels, etc. If the field is not set, it
-         * is the primary common use central frequency, e.g. L1 = 1575.45 MHz
-         * for GPS.
+         * 1176.45 MHz, varying GLO channels, etc. If the field is zero, it is
+         * the primary common use central frequency, e.g. L1 = 1575.45 MHz for
+         * GPS.
          *
          * For an L1, L5 receiver tracking a satellite on L1 and L5 at the same
          * time, two GnssSvInfo structs must be reported for this same
@@ -125,8 +125,7 @@
          * to L1 must be filled, and in the other all of the values related to
          * L5 must be filled.
          *
-         * If the data is available, gnssClockFlags must contain
-         * HAS_CARRIER_FREQUENCY.
+         * If the data is available, svFlag must contain HAS_CARRIER_FREQUENCY.
          */
         float carrierFrequencyHz;
 
diff --git a/gnss/1.0/IGnssMeasurementCallback.hal b/gnss/1.0/IGnssMeasurementCallback.hal
index b27c2e0..2d44766 100644
--- a/gnss/1.0/IGnssMeasurementCallback.hal
+++ b/gnss/1.0/IGnssMeasurementCallback.hal
@@ -124,6 +124,12 @@
         /**
          * A set of flags indicating the validity of the fields in this data
          * structure.
+         *
+         * Fields for which there is no corresponding flag must be filled in
+         * with a valid value.  For convenience, these are marked as mandatory.
+         *
+         * Others fields may have invalid information in them, if not marked as
+         * valid by the corresponding bit in gnssClockFlags.
          */
         bitfield<GnssClockFlags> gnssClockFlags;
 
@@ -155,7 +161,7 @@
          * Sub-nanosecond accuracy can be provided by means of the 'biasNs' field.
          * The value contains the timeUncertaintyNs in it.
          *
-         * This field is mandatory.
+         * This value is mandatory.
          */
         int64_t timeNs;
 
@@ -172,29 +178,31 @@
 
         /**
          * The difference between hardware clock ('time' field) inside GNSS receiver
-         * and the true GNSS time since 0000Z, January 6, 1980, in nanoseconds.
+         * and the true GPS time since 0000Z, January 6, 1980, in nanoseconds.
          *
          * The sign of the value is defined by the following equation:
-         *      local estimate of GNSS time = timeNs - (fullBiasNs + biasNs)
+         *      local estimate of GPS time = timeNs - (fullBiasNs + biasNs)
          *
-         * This value is mandatory if the receiver has estimated GNSS time. If the
-         * computed time is for a non-GNSS constellation, the time offset of that
-         * constellation to GNSS has to be applied to fill this value. The error
-         * estimate for the sum of this and the biasNs is the biasUncertaintyNs,
-         * and the caller is responsible for using this uncertainty (it can be very
-         * large before the GNSS time has been solved for.) If the data is available
-         * gnssClockFlags must contain HAS_FULL_BIAS.
+         * If receiver has computed time for a non-GPS constellation, the time offset of
+         * that constellation versus GPS time must be applied to fill this value.
+         *
+         * The error estimate for the sum of this and the biasNs is the biasUncertaintyNs.
+         *
+         * If the data is available gnssClockFlags must contain HAS_FULL_BIAS.
+         *
+         * This value is mandatory if the receiver has estimated GPS time.
          */
         int64_t fullBiasNs;
 
         /**
-         * Sub-nanosecond bias.
+         * Sub-nanosecond bias - used with fullBiasNS, see fullBiasNs for details.
+         *
          * The error estimate for the sum of this and the fullBiasNs is the
          * biasUncertaintyNs.
          *
-         * If the data is available gnssClockFlags must contain HAS_BIAS. If GNSS
-         * has computed a position fix. This value is mandatory if the receiver has
-         * estimated GNSS time.
+         * If the data is available gnssClockFlags must contain HAS_BIAS.
+         *
+         * This value is mandatory if the receiver has estimated GPS time.
          */
         double biasNs;
 
@@ -203,9 +211,12 @@
          * bias) in nanoseconds. The uncertainty is represented as an absolute
          * (single sided) value.
          *
-         * If the data is available gnssClockFlags must contain
-         * HAS_BIAS_UNCERTAINTY. This value is mandatory if the receiver
-         * has estimated GNSS time.
+         * The caller is responsible for using this uncertainty (it can be very
+         * large before the GPS time has been fully resolved.)
+         *
+         * If the data is available gnssClockFlags must contain HAS_BIAS_UNCERTAINTY.
+         *
+         * This value is mandatory if the receiver has estimated GPS time.
          */
         double biasUncertaintyNs;
 
@@ -216,10 +227,9 @@
          * frequency, and that the (fullBiasNs + biasNs) is growing more positive
          * over time.
          *
-         * The value contains the 'drift uncertainty' in it.
          * If the data is available gnssClockFlags must contain HAS_DRIFT.
          *
-         * This value is mandatory if the receiver has estimated GNSS time.
+         * This value is mandatory if the receiver has estimated GPS time.
          */
         double driftNsps;
 
@@ -228,15 +238,15 @@
          * second).
          * The uncertainty is represented as an absolute (single sided) value.
          *
-         * If the data is available gnssClockFlags must contain
-         * HAS_DRIFT_UNCERTAINTY. If GNSS has computed a position fix this
-         * field is mandatory and must be populated.
+         * If the data is available gnssClockFlags must contain HAS_DRIFT_UNCERTAINTY.
+         *
+         * This value is mandatory if the receiver has estimated GPS time.
          */
         double driftUncertaintyNsps;
 
         /**
-         * When there are any discontinuities in the HW clock, this field is
-         * mandatory.
+         * This field must be incremented, when there are discontinuities in the
+         * hardware clock.
          *
          * A "discontinuity" is meant to cover the case of a switch from one source
          * of clock to another.  A single free-running crystal oscillator (XO)
@@ -262,6 +272,8 @@
          * as this avoids the need to use (waste) a GNSS measurement to fully
          * re-solve for the GNSS clock bias and drift, when using the accompanying
          * measurements, from consecutive GnssData reports.
+         *
+         * This value is mandatory.
          */
         uint32_t hwClockDiscontinuityCount;
 
@@ -280,17 +292,26 @@
         /**
          * A set of flags indicating the validity of the fields in this data
          * structure.
+         *
+         * Fields for which there is no corresponding flag must be filled in
+         * with a valid value.  For convenience, these are marked as mandatory.
+         *
+         * Others fields may have invalid information in them, if not marked as
+         * valid by the corresponding bit in flags.
          */
         bitfield<GnssMeasurementFlags> flags;
 
         /**
          * Satellite vehicle ID number, as defined in GnssSvInfo::svid
-         * This is a mandatory value.
+         *
+         * This value is mandatory.
          */
         int16_t svid;
 
         /**
          * Defines the constellation of the given SV.
+         *
+         * This value is mandatory.
          */
         GnssConstellationType constellation;
 
@@ -302,8 +323,10 @@
          *      measurement time = GnssClock::timeNs + timeOffsetNs
          *
          * It provides an individual time-stamp for the measurement, and allows
-         * sub-nanosecond accuracy.
-         * This is a mandatory value.
+         * sub-nanosecond accuracy. It may be zero if all measurements are
+         * aligned to a common time.
+         *
+         * This value is mandatory.
          */
         double timeOffsetNs;
 
@@ -313,7 +336,7 @@
          * Based on the sync state, the 'received GNSS tow' field must be interpreted
          * accordingly.
          *
-         * This is a mandatory value.
+         * This value is mandatory.
          */
         bitfield<GnssMeasurementState> state;
 
@@ -413,7 +436,11 @@
          * Carrier-to-noise density in dB-Hz, typically in the range [0, 63].
          * It contains the measured C/N0 value for the signal at the antenna port.
          *
-         * This is a mandatory value.
+         * If a signal has separate components (e.g. Pilot and Data channels) and
+         * the receiver only processes one of the components, then the reported
+         * cN0DbHz reflects only the component that is processed.
+         *
+         * This value is mandatory.
          */
         double cN0DbHz;
 
@@ -449,7 +476,7 @@
          * 1-Sigma uncertainty of the pseudorangeRateMps.
          * The uncertainty is represented as an absolute (single sided) value.
          *
-         * This is a mandatory value.
+         * This value is mandatory.
          */
         double pseudorangeRateUncertaintyMps;
 
@@ -457,7 +484,7 @@
          * Accumulated delta range's state. It indicates whether ADR is reset or
          * there is a cycle slip(indicating loss of lock).
          *
-         * This is a mandatory value.
+         * This value is mandatory.
          */
         bitfield<GnssAccumulatedDeltaRangeState> accumulatedDeltaRangeState;
 
diff --git a/gnss/1.0/vts/functional/Android.bp b/gnss/1.0/vts/functional/Android.bp
index d7713db..505cb41 100644
--- a/gnss/1.0/vts/functional/Android.bp
+++ b/gnss/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalGnssV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.gnss@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/gnss/1.1/vts/functional/Android.bp b/gnss/1.1/vts/functional/Android.bp
index 67ef486..9892eca 100644
--- a/gnss/1.1/vts/functional/Android.bp
+++ b/gnss/1.1/vts/functional/Android.bp
@@ -26,4 +26,5 @@
         "android.hardware.gnss@1.0",
         "android.hardware.gnss@1.1",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/graphics/bufferqueue/1.0/Android.bp b/graphics/bufferqueue/1.0/Android.bp
index 0333a42..e23ca59 100644
--- a/graphics/bufferqueue/1.0/Android.bp
+++ b/graphics/bufferqueue/1.0/Android.bp
@@ -15,6 +15,6 @@
         "android.hardware.media@1.0",
         "android.hidl.base@1.0",
     ],
-    gen_java: false,
+    gen_java: true,
 }
 
diff --git a/graphics/composer/2.1/default/android.hardware.graphics.composer@2.1-service.rc b/graphics/composer/2.1/default/android.hardware.graphics.composer@2.1-service.rc
index a2a12c1..5a5b51e 100644
--- a/graphics/composer/2.1/default/android.hardware.graphics.composer@2.1-service.rc
+++ b/graphics/composer/2.1/default/android.hardware.graphics.composer@2.1-service.rc
@@ -3,9 +3,5 @@
     user system
     group graphics drmrpc
     capabilities SYS_NICE
+    onrestart restart surfaceflinger
     writepid /dev/cpuset/system-background/tasks
-
-# Restart HWC when SurfaceFlinger stops. This turns off the display and prpares
-# a new HWC instance for when SurfaceFlinger gets started again
-on property:init.svc.surfaceflinger=stopped
-    restart vendor.hwcomposer-2-1
diff --git a/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerClient.h b/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerClient.h
index 86525b8..095189f 100644
--- a/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerClient.h
+++ b/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerClient.h
@@ -102,6 +102,7 @@
         }
 
         void onRefresh(Display display) {
+            mResources->setDisplayMustValidateState(display, true);
             auto ret = mCallback->onRefresh(display);
             ALOGE_IF(!ret.isOk(), "failed to send onRefresh: %s", ret.description().c_str());
         }
diff --git a/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerCommandEngine.h b/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerCommandEngine.h
index 36aa64e..d87110a 100644
--- a/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerCommandEngine.h
+++ b/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerCommandEngine.h
@@ -258,6 +258,7 @@
 
         auto err = mHal->validateDisplay(mCurrentDisplay, &changedLayers, &compositionTypes,
                                          &displayRequestMask, &requestedLayers, &requestMasks);
+        mResources->setDisplayMustValidateState(mCurrentDisplay, false);
         if (err == Error::NONE) {
             mWriter.setChangedCompositionTypes(changedLayers, compositionTypes);
             mWriter.setDisplayRequests(displayRequestMask, requestedLayers, requestMasks);
@@ -278,7 +279,9 @@
             int presentFence = -1;
             std::vector<Layer> layers;
             std::vector<int> fences;
-            auto err = mHal->presentDisplay(mCurrentDisplay, &presentFence, &layers, &fences);
+            auto err = mResources->mustValidateDisplay(mCurrentDisplay)
+                           ? Error::NOT_VALIDATED
+                           : mHal->presentDisplay(mCurrentDisplay, &presentFence, &layers, &fences);
             if (err == Error::NONE) {
                 mWriter.setPresentOrValidateResult(1);
                 mWriter.setPresentFence(presentFence);
@@ -296,6 +299,7 @@
 
         auto err = mHal->validateDisplay(mCurrentDisplay, &changedLayers, &compositionTypes,
                                          &displayRequestMask, &requestedLayers, &requestMasks);
+        mResources->setDisplayMustValidateState(mCurrentDisplay, false);
         if (err == Error::NONE) {
             mWriter.setPresentOrValidateResult(0);
             mWriter.setChangedCompositionTypes(changedLayers, compositionTypes);
diff --git a/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerResources.h b/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerResources.h
index 7bb3692..2cbf044 100644
--- a/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerResources.h
+++ b/graphics/composer/2.1/utils/hal/include/composer-hal/2.1/ComposerResources.h
@@ -216,7 +216,8 @@
         : mType(type),
           mClientTargetCache(importer),
           mOutputBufferCache(importer, ComposerHandleCache::HandleType::BUFFER,
-                             outputBufferCacheSize) {}
+                             outputBufferCacheSize),
+          mMustValidate(true) {}
 
     bool initClientTargetCache(uint32_t cacheSize) {
         return mClientTargetCache.initCache(ComposerHandleCache::HandleType::BUFFER, cacheSize);
@@ -263,10 +264,15 @@
         return layers;
     }
 
+    void setMustValidateState(bool mustValidate) { mMustValidate = mustValidate; }
+
+    bool mustValidate() const { return mMustValidate; }
+
    protected:
     const DisplayType mType;
     ComposerHandleCache mClientTargetCache;
     ComposerHandleCache mOutputBufferCache;
+    bool mMustValidate;
 
     std::unordered_map<Layer, std::unique_ptr<ComposerLayerResource>> mLayerResources;
 };
@@ -389,6 +395,23 @@
                                                        outStreamHandle, outReplacedStream);
     }
 
+    void setDisplayMustValidateState(Display display, bool mustValidate) {
+        std::lock_guard<std::mutex> lock(mDisplayResourcesMutex);
+        auto* displayResource = findDisplayResourceLocked(display);
+        if (displayResource) {
+            displayResource->setMustValidateState(mustValidate);
+        }
+    }
+
+    bool mustValidateDisplay(Display display) {
+        std::lock_guard<std::mutex> lock(mDisplayResourcesMutex);
+        auto* displayResource = findDisplayResourceLocked(display);
+        if (displayResource) {
+            return displayResource->mustValidate();
+        }
+        return false;
+    }
+
    protected:
     virtual std::unique_ptr<ComposerDisplayResource> createDisplayResource(
         ComposerDisplayResource::DisplayType type, uint32_t outputBufferCacheSize) {
diff --git a/graphics/composer/2.1/utils/hwc2on1adapter/HWC2On1Adapter.cpp b/graphics/composer/2.1/utils/hwc2on1adapter/HWC2On1Adapter.cpp
index 6551a99..366d641 100644
--- a/graphics/composer/2.1/utils/hwc2on1adapter/HWC2On1Adapter.cpp
+++ b/graphics/composer/2.1/utils/hwc2on1adapter/HWC2On1Adapter.cpp
@@ -2096,8 +2096,7 @@
     } else if (mCompositionType == HWC2::Composition::Sideband) {
         output << "  Handle: " << mSidebandStream << '\n';
     } else {
-        output << "  Buffer: " << mBuffer.getBuffer() << "/" <<
-                mBuffer.getFence() << '\n';
+        output << "  Buffer: " << mBuffer.getBuffer() << '\n';
         output << fill << "  Display frame [LTRB]: " <<
                 rectString(mDisplayFrame) << '\n';
         output << fill << "  Source crop: " <<
diff --git a/graphics/composer/2.1/utils/hwc2onfbadapter/HWC2OnFbAdapter.cpp b/graphics/composer/2.1/utils/hwc2onfbadapter/HWC2OnFbAdapter.cpp
index 7c9e651..0f50577 100644
--- a/graphics/composer/2.1/utils/hwc2onfbadapter/HWC2OnFbAdapter.cpp
+++ b/graphics/composer/2.1/utils/hwc2onfbadapter/HWC2OnFbAdapter.cpp
@@ -32,6 +32,8 @@
 #include <log/log.h>
 #include <sync/sync.h>
 
+using namespace HWC2;
+
 namespace android {
 
 namespace {
@@ -629,9 +631,10 @@
     }
 }
 
-void getCapabilitiesHook(hwc2_device_t* /*device*/, uint32_t* outCount,
-                         int32_t* /*outCapabilities*/) {
-    *outCount = 0;
+void getCapabilitiesHook(hwc2_device_t* device, uint32_t* outCount,
+                         int32_t* outCapabilities) {
+    auto& adapter = HWC2OnFbAdapter::cast(device);
+    adapter.getCapabilities(outCount, outCapabilities);
 }
 
 int closeHook(hw_device_t* device) {
@@ -656,6 +659,10 @@
     mFbInfo.xdpi_scaled = int(mFbDevice->xdpi * 1000.0f);
     mFbInfo.ydpi_scaled = int(mFbDevice->ydpi * 1000.0f);
 
+    // Present fences aren't supported, always indicate PresentFenceIsNotReliable
+    // for FB devices
+    mCapabilities.insert(Capability::PresentFenceIsNotReliable);
+
     mVsyncThread.start(0, mFbInfo.vsync_period_ns);
 }
 
@@ -791,6 +798,23 @@
     mVsyncThread.enableCallback(enable);
 }
 
+void HWC2OnFbAdapter::getCapabilities(uint32_t* outCount,
+                                      int32_t* outCapabilities) {
+    if (outCapabilities == nullptr) {
+        *outCount = mCapabilities.size();
+        return;
+    }
+
+    auto capabilityIter = mCapabilities.cbegin();
+    for (size_t written = 0; written < *outCount; ++written) {
+        if (capabilityIter == mCapabilities.cend()) {
+            return;
+        }
+        outCapabilities[written] = static_cast<int32_t>(*capabilityIter);
+        ++capabilityIter;
+    }
+}
+
 int64_t HWC2OnFbAdapter::VsyncThread::now() {
     struct timespec ts;
     clock_gettime(CLOCK_MONOTONIC, &ts);
diff --git a/graphics/composer/2.1/utils/hwc2onfbadapter/include/hwc2onfbadapter/HWC2OnFbAdapter.h b/graphics/composer/2.1/utils/hwc2onfbadapter/include/hwc2onfbadapter/HWC2OnFbAdapter.h
index d6272fd..f1f11ef 100644
--- a/graphics/composer/2.1/utils/hwc2onfbadapter/include/hwc2onfbadapter/HWC2OnFbAdapter.h
+++ b/graphics/composer/2.1/utils/hwc2onfbadapter/include/hwc2onfbadapter/HWC2OnFbAdapter.h
@@ -23,7 +23,11 @@
 #include <thread>
 #include <unordered_set>
 
+#define HWC2_INCLUDE_STRINGIFICATION
+#define HWC2_USE_CPP11
 #include <hardware/hwcomposer2.h>
+#undef HWC2_INCLUDE_STRINGIFICATION
+#undef HWC2_USE_CPP11
 
 struct framebuffer_device_t;
 
@@ -75,6 +79,7 @@
 
     void setVsyncCallback(HWC2_PFN_VSYNC callback, hwc2_callback_data_t data);
     void enableVsync(bool enable);
+    void getCapabilities(uint32_t* outCount, int32_t* outCapabilities);
 
 private:
     framebuffer_device_t* mFbDevice{nullptr};
@@ -90,6 +95,8 @@
 
     buffer_handle_t mBuffer{nullptr};
 
+    std::unordered_set<HWC2::Capability> mCapabilities;
+
     class VsyncThread {
     public:
         static int64_t now();
diff --git a/graphics/composer/2.1/utils/passthrough/include/composer-passthrough/2.1/HwcHal.h b/graphics/composer/2.1/utils/passthrough/include/composer-passthrough/2.1/HwcHal.h
index 964e75b..436e461 100644
--- a/graphics/composer/2.1/utils/passthrough/include/composer-passthrough/2.1/HwcHal.h
+++ b/graphics/composer/2.1/utils/passthrough/include/composer-passthrough/2.1/HwcHal.h
@@ -111,7 +111,6 @@
     }
 
     void registerEventCallback(hal::ComposerHal::EventCallback* callback) override {
-        mMustValidateDisplay = true;
         mEventCallback = callback;
 
         mDispatch.registerCallback(mDevice, HWC2_CALLBACK_HOTPLUG, this,
@@ -331,7 +330,6 @@
         uint32_t typesCount = 0;
         uint32_t reqsCount = 0;
         int32_t err = mDispatch.validateDisplay(mDevice, display, &typesCount, &reqsCount);
-        mMustValidateDisplay = false;
 
         if (err != HWC2_ERROR_NONE && err != HWC2_ERROR_HAS_CHANGES) {
             return static_cast<Error>(err);
@@ -384,10 +382,6 @@
 
     Error presentDisplay(Display display, int32_t* outPresentFence, std::vector<Layer>* outLayers,
                          std::vector<int32_t>* outReleaseFences) override {
-        if (mMustValidateDisplay) {
-            return Error::NOT_VALIDATED;
-        }
-
         *outPresentFence = -1;
         int32_t err = mDispatch.presentDisplay(mDevice, display, outPresentFence);
         if (err != HWC2_ERROR_NONE) {
@@ -593,7 +587,6 @@
 
     static void refreshHook(hwc2_callback_data_t callbackData, hwc2_display_t display) {
         auto hal = static_cast<HwcHalImpl*>(callbackData);
-        hal->mMustValidateDisplay = true;
         hal->mEventCallback->onRefresh(display);
     }
 
@@ -654,8 +647,6 @@
     } mDispatch = {};
 
     hal::ComposerHal::EventCallback* mEventCallback = nullptr;
-
-    std::atomic<bool> mMustValidateDisplay{true};
 };
 
 }  // namespace detail
diff --git a/graphics/composer/2.1/utils/vts/ComposerVts.cpp b/graphics/composer/2.1/utils/vts/ComposerVts.cpp
index 2f531b4..6e668af 100644
--- a/graphics/composer/2.1/utils/vts/ComposerVts.cpp
+++ b/graphics/composer/2.1/utils/vts/ComposerVts.cpp
@@ -78,9 +78,9 @@
 ComposerClient::ComposerClient(const sp<IComposerClient>& client) : mClient(client) {}
 
 ComposerClient::~ComposerClient() {
-    for (auto it : mDisplayResources) {
+    for (const auto& it : mDisplayResources) {
         Display display = it.first;
-        DisplayResource& resource = it.second;
+        const DisplayResource& resource = it.second;
 
         for (auto layer : resource.layers) {
             EXPECT_EQ(Error::NONE, mClient->destroyLayer(display, layer))
diff --git a/graphics/composer/2.1/vts/functional/Android.bp b/graphics/composer/2.1/vts/functional/Android.bp
index 8e346df..c98cc0d 100644
--- a/graphics/composer/2.1/vts/functional/Android.bp
+++ b/graphics/composer/2.1/vts/functional/Android.bp
@@ -34,4 +34,5 @@
     header_libs: [
         "android.hardware.graphics.composer@2.1-command-buffer",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp b/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp
index 747c66c..72f3f1b 100644
--- a/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp
+++ b/graphics/composer/2.1/vts/functional/VtsHalGraphicsComposerV2_1TargetTest.cpp
@@ -293,7 +293,7 @@
  */
 TEST_F(GraphicsComposerHidlTest, SetColorMode) {
     std::unordered_set<ColorMode> validModes;
-    for (auto mode : hidl_enum_iterator<ColorMode>()) {
+    for (auto mode : hidl_enum_range<ColorMode>()) {
         validModes.insert(mode);
     }
 
diff --git a/graphics/composer/2.2/default/android.hardware.graphics.composer@2.2-service.rc b/graphics/composer/2.2/default/android.hardware.graphics.composer@2.2-service.rc
index a41d902..efe6dad 100644
--- a/graphics/composer/2.2/default/android.hardware.graphics.composer@2.2-service.rc
+++ b/graphics/composer/2.2/default/android.hardware.graphics.composer@2.2-service.rc
@@ -4,3 +4,4 @@
     group graphics drmrpc
     capabilities SYS_NICE
     onrestart restart surfaceflinger
+    writepid /dev/cpuset/system-background/tasks
diff --git a/graphics/composer/2.2/vts/functional/Android.bp b/graphics/composer/2.2/vts/functional/Android.bp
index 669fbae..a3da829 100644
--- a/graphics/composer/2.2/vts/functional/Android.bp
+++ b/graphics/composer/2.2/vts/functional/Android.bp
@@ -41,4 +41,5 @@
         "android.hardware.graphics.composer@2.1-command-buffer",
         "android.hardware.graphics.composer@2.2-command-buffer",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/graphics/mapper/2.0/utils/vts/Android.bp b/graphics/mapper/2.0/utils/vts/Android.bp
index 1aa3185..e43011f 100644
--- a/graphics/mapper/2.0/utils/vts/Android.bp
+++ b/graphics/mapper/2.0/utils/vts/Android.bp
@@ -16,17 +16,13 @@
 
 cc_library_static {
     name: "android.hardware.graphics.mapper@2.0-vts",
-    defaults: ["hidl_defaults"],
+    defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["MapperVts.cpp"],
     cflags: [
         "-O0",
         "-g",
     ],
-    shared_libs: [
-        "libutils",
-    ],
     static_libs: [
-        "VtsHalHidlTargetTestBase",
         "android.hardware.graphics.allocator@2.0",
         "android.hardware.graphics.mapper@2.0",
     ],
diff --git a/graphics/mapper/2.0/vts/functional/Android.bp b/graphics/mapper/2.0/vts/functional/Android.bp
index 969317a..853c2a3 100644
--- a/graphics/mapper/2.0/vts/functional/Android.bp
+++ b/graphics/mapper/2.0/vts/functional/Android.bp
@@ -24,4 +24,5 @@
         "android.hardware.graphics.mapper@2.0",
         "android.hardware.graphics.mapper@2.0-vts",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/graphics/mapper/2.1/vts/functional/Android.bp b/graphics/mapper/2.1/vts/functional/Android.bp
index ac67af8..afd8e7f 100644
--- a/graphics/mapper/2.1/vts/functional/Android.bp
+++ b/graphics/mapper/2.1/vts/functional/Android.bp
@@ -26,4 +26,5 @@
         "android.hardware.graphics.mapper@2.0-vts",
         "android.hardware.graphics.mapper@2.1-vts",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/health/1.0/default/Android.bp b/health/1.0/default/Android.bp
index cb2e87d..8fbb8c3 100644
--- a/health/1.0/default/Android.bp
+++ b/health/1.0/default/Android.bp
@@ -1,6 +1,7 @@
 cc_library_static {
     name: "android.hardware.health@1.0-convert",
     vendor_available: true,
+    recovery_available: true,
     srcs: ["convert.cpp"],
     include_dirs: [
         "system/core/base/include",
diff --git a/health/1.0/default/android.hardware.health@1.0-service.rc b/health/1.0/default/android.hardware.health@1.0-service.rc
index d74a07e..405784f 100644
--- a/health/1.0/default/android.hardware.health@1.0-service.rc
+++ b/health/1.0/default/android.hardware.health@1.0-service.rc
@@ -2,3 +2,4 @@
     class hal
     user system
     group system
+    capabilities WAKE_ALARM
diff --git a/health/1.0/default/libhealthd/Android.bp b/health/1.0/default/libhealthd/Android.bp
index ce02e28..a90d50d 100644
--- a/health/1.0/default/libhealthd/Android.bp
+++ b/health/1.0/default/libhealthd/Android.bp
@@ -4,6 +4,7 @@
     srcs: ["healthd_board_default.cpp"],
     name: "libhealthd.default",
     vendor_available: true,
+    recovery_available: true,
     cflags: ["-Werror"],
     include_dirs: ["system/core/base/include"],
     header_libs: ["libhealthd_headers"],
diff --git a/health/1.0/vts/functional/Android.bp b/health/1.0/vts/functional/Android.bp
index 8742651..c14dcee 100644
--- a/health/1.0/vts/functional/Android.bp
+++ b/health/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalHealthV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.health@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/health/2.0/README b/health/2.0/README
deleted file mode 100644
index 11e6a7a..0000000
--- a/health/2.0/README
+++ /dev/null
@@ -1,118 +0,0 @@
-Upgrading from health@1.0 HAL
-
-0. Remove android.hardware.health@1.0* from PRODUCT_PACKAGES
-   in device/<manufacturer>/<device>/device.mk
-
-1. If the device does not have a vendor-specific libhealthd AND does not
-   implement storage-related APIs, just do the following:
-
-    1.1 (recommended) To remove healthd from the build,
-        PRODUCT_PACKAGES += android.hardware.health@2.0-service.override
-        DEVICE_FRAMEWORK_MANIFEST_FILE += \
-            system/libhidl/vintfdata/manifest_healthd_exclude.xml
-    1.2 To keep healthd in the build,
-        PRODUCT_PACKAGES += android.hardware.health@2.0-service
-
-   Otherwise, continue to Step 2.
-
-2. Create directory
-   device/<manufacturer>/<device>/health
-
-3. Create device/<manufacturer>/<device>/health/Android.bp
-   (or equivalent device/<manufacturer>/<device>/health/Android.mk)
-
-cc_binary {
-    name: "android.hardware.health@2.0-service.<device>",
-    init_rc: ["android.hardware.health@2.0-service.<device>.rc"],
-    proprietary: true,
-    relative_install_path: "hw",
-    srcs: [
-        "HealthService.cpp",
-    ],
-
-    cflags: [
-        "-Wall",
-        "-Werror",
-    ],
-
-    static_libs: [
-        "android.hardware.health@2.0-impl",
-        "android.hardware.health@1.0-convert",
-        "libhealthservice",
-        "libbatterymonitor",
-    ],
-
-    shared_libs: [
-        "libbase",
-        "libcutils",
-        "libhidlbase",
-        "libhidltransport",
-        "libutils",
-        "android.hardware.health@2.0",
-    ],
-
-    header_libs: ["libhealthd_headers"],
-
-    // Uncomment the following to remove healthd from the build.
-    // overrides: [
-    //     "healthd",
-    // ],
-}
-
-    3.1 (recommended) To remove healthd from the build, keep "overrides"
-          section, and include the following in device.mk:
-            DEVICE_FRAMEWORK_MANIFEST_FILE += \
-                system/libhidl/vintfdata/manifest_healthd_exclude.xml
-    3.2 To keep healthd in the build, remove "overrides" section.
-
-4. Create device/<manufacturer>/<device>/health/android.hardware.health@2.0-service.<device>.rc
-
-service vendor.health-hal-2-0 /vendor/bin/hw/android.hardware.health@2.0-service.<device>
-    class hal
-    user system
-    group system
-    file /dev/kmsg w
-
-5. Create device/<manufacturer>/<device>/health/HealthService.cpp:
-
-#include <health2/service.h>
-int main() { return health_service_main(); }
-
-6. libhealthd dependency:
-
-6.1 If the device has a vendor-specific libhealthd.<soc>, add it to static_libs.
-
-6.2 If the device does not have a vendor-specific libhealthd, add the following
-    lines to HealthService.cpp:
-
-#include <healthd/healthd.h>
-void healthd_board_init(struct healthd_config*) {}
-
-int healthd_board_battery_update(struct android::BatteryProperties*) {
-    // return 0 to log periodic polled battery status to kernel log
-    return 0;
-}
-
-7. Storage related APIs:
-
-7.1 If the device does not implement IHealth.getDiskStats and
-    IHealth.getStorageInfo, add libstoragehealthdefault to static_libs.
-
-7.2 If the device implements one of these two APIs, add and implement the
-    following functions in HealthService.cpp:
-
-void get_storage_info(std::vector<struct StorageInfo>& info) {
-    // ...
-}
-void get_disk_stats(std::vector<struct DiskStats>& stats) {
-    // ...
-}
-
-8. Update necessary SELinux permissions. For example,
-
-# device/<manufacturer>/<device>/sepolicy/vendor/file_contexts
-/vendor/bin/hw/android\.hardware\.health@2\.0-service.<device> u:object_r:hal_health_default_exec:s0
-
-# device/<manufacturer>/<device>/sepolicy/vendor/hal_health_default.te
-# Add device specific permissions to hal_health_default domain, especially
-# if Step 6.1 or Step 7.2 is done.
diff --git a/health/2.0/README b/health/2.0/README
new file mode 120000
index 0000000..42061c0
--- /dev/null
+++ b/health/2.0/README
@@ -0,0 +1 @@
+README.md
\ No newline at end of file
diff --git a/health/2.0/README.md b/health/2.0/README.md
new file mode 100644
index 0000000..58ea9e3
--- /dev/null
+++ b/health/2.0/README.md
@@ -0,0 +1,177 @@
+# Upgrading from Health 1.0 HAL
+
+1. Remove `android.hardware.health@1.0*` from `PRODUCT_PACKAGES`
+   in `device/<manufacturer>/<device>/device.mk`
+
+1. If the device does not have a vendor-specific `libhealthd` AND does not
+   implement storage-related APIs, just do the following:
+
+   ```mk
+   PRODUCT_PACKAGES += android.hardware.health@2.0-service
+   ```
+
+   Otherwise, continue to the next step.
+
+1. Create directory
+   `device/<manufacturer>/<device>/health`
+
+1. Create `device/<manufacturer>/<device>/health/Android.bp`
+   (or equivalent `device/<manufacturer>/<device>/health/Android.mk`)
+
+    ```bp
+    cc_binary {
+        name: "android.hardware.health@2.0-service.<device>",
+        init_rc: ["android.hardware.health@2.0-service.<device>.rc"],
+        proprietary: true,
+        relative_install_path: "hw",
+        srcs: [
+            "HealthService.cpp",
+        ],
+
+        cflags: [
+            "-Wall",
+            "-Werror",
+        ],
+
+        static_libs: [
+            "android.hardware.health@2.0-impl",
+            "android.hardware.health@1.0-convert",
+            "libhealthservice",
+            "libbatterymonitor",
+        ],
+
+        shared_libs: [
+            "libbase",
+            "libcutils",
+            "libhidlbase",
+            "libhidltransport",
+            "libutils",
+            "android.hardware.health@2.0",
+        ],
+
+        header_libs: ["libhealthd_headers"],
+
+        overrides: [
+            "healthd",
+        ],
+    }
+    ```
+
+    1. (recommended) To remove `healthd` from the build, keep "overrides" section.
+    1. To keep `healthd` in the build, remove "overrides" section.
+
+1. Create `device/<manufacturer>/<device>/health/android.hardware.health@2.0-service.<device>.rc`
+
+    ```rc
+    service vendor.health-hal-2-0 /vendor/bin/hw/android.hardware.health@2.0-service.<device>
+        class hal
+        user system
+        group system
+        capabilities WAKE_ALARM
+        file /dev/kmsg w
+    ```
+
+1. Create `device/<manufacturer>/<device>/health/HealthService.cpp`:
+
+    ```c++
+    #include <health2/service.h>
+    int main() { return health_service_main(); }
+    ```
+
+1. `libhealthd` dependency:
+
+    1. If the device has a vendor-specific `libhealthd.<soc>`, add it to static_libs.
+
+    1. If the device does not have a vendor-specific `libhealthd`, add the following
+        lines to `HealthService.cpp`:
+
+        ```c++
+        #include <healthd/healthd.h>
+        void healthd_board_init(struct healthd_config*) {}
+
+        int healthd_board_battery_update(struct android::BatteryProperties*) {
+            // return 0 to log periodic polled battery status to kernel log
+            return 0;
+        }
+        ```
+
+1. Storage related APIs:
+
+    1. If the device does not implement `IHealth.getDiskStats` and
+        `IHealth.getStorageInfo`, add `libhealthstoragedefault` to `static_libs`.
+
+    1. If the device implements one of these two APIs, add and implement the
+        following functions in `HealthService.cpp`:
+
+        ```c++
+        void get_storage_info(std::vector<struct StorageInfo>& info) {
+            // ...
+        }
+        void get_disk_stats(std::vector<struct DiskStats>& stats) {
+            // ...
+        }
+        ```
+
+1. Update necessary SELinux permissions. For example,
+
+    ```
+    # device/<manufacturer>/<device>/sepolicy/vendor/file_contexts
+    /vendor/bin/hw/android\.hardware\.health@2\.0-service\.<device> u:object_r:hal_health_default_exec:s0
+
+    # device/<manufacturer>/<device>/sepolicy/vendor/hal_health_default.te
+    # Add device specific permissions to hal_health_default domain, especially
+    # if a device-specific libhealthd is used and/or device-specific storage related
+    # APIs are implemented.
+    ```
+
+1. Implementing health HAL in recovery. The health HAL is used for battery
+status checks during OTA for non-A/B devices. If the health HAL is not
+implemented in recovery, `is_battery_ok()` will always return `true`.
+
+    1. If the device does not have a vendor-specific `libhealthd`, nothing needs to
+    be done. A "backup" implementation is provided in
+    `android.hardware.health@2.0-impl-default`, which is always installed to recovery
+    image by default.
+
+    1. If the device does have a vendor-specific `libhealthd`, implement the following
+    module and include it in `PRODUCT_PACKAGES` (replace `<device>` with appropriate
+    strings):
+
+    ```bp
+    // Android.bp
+    cc_library_shared {
+        name: "android.hardware.health@2.0-impl-<device>",
+        recovery_available: true,
+        relative_install_path: "hw",
+        static_libs: [
+            "android.hardware.health@2.0-impl",
+            "libhealthd.<device>"
+            // Include the following or implement device-specific storage APIs
+            "libhealthstoragedefault",
+        ],
+        srcs: [
+            "HealthImpl.cpp",
+        ],
+        overrides: [
+            "android.hardware.health@2.0-impl-default",
+        ],
+    }
+    ```
+
+    ```c++
+    // HealthImpl.cpp
+    #include <health2/Health.h>
+    #include <healthd/healthd.h>
+    using android::hardware::health::V2_0::IHealth;
+    using android::hardware::health::V2_0::implementation::Health;
+    extern "C" IHealth* HIDL_FETCH_IHealth(const char* name) {
+        const static std::string providedInstance{"default"};
+        if (providedInstance != name) return nullptr;
+        return Health::initInstance(&gHealthdConfig).get();
+    }
+    ```
+
+    ```mk
+    # device.mk
+    PRODUCT_PACKAGES += android.hardware.health@2.0-impl-<device>
+    ```
diff --git a/health/2.0/default/Android.bp b/health/2.0/default/Android.bp
index 8eb02e0..a85a704 100644
--- a/health/2.0/default/Android.bp
+++ b/health/2.0/default/Android.bp
@@ -1,15 +1,12 @@
-cc_library_static {
-    name: "android.hardware.health@2.0-impl",
-    vendor_available: true,
-    srcs: [
-        "Health.cpp",
-        "healthd_common.cpp",
+cc_defaults {
+    name: "android.hardware.health@2.0-impl_defaults",
+
+    recovery_available: true,
+    cflags: [
+        "-Wall",
+        "-Werror",
     ],
 
-    cflags: ["-DHEALTHD_USE_HEALTH_2_0"],
-
-    export_include_dirs: ["include"],
-
     shared_libs: [
         "libbase",
         "libhidlbase",
@@ -26,3 +23,39 @@
         "android.hardware.health@1.0-convert",
     ],
 }
+
+// Helper library for implementing health HAL. It is recommended that a health
+// service or passthrough HAL link to this library.
+cc_library_static {
+    name: "android.hardware.health@2.0-impl",
+    defaults: ["android.hardware.health@2.0-impl_defaults"],
+
+    vendor_available: true,
+    srcs: [
+        "Health.cpp",
+        "healthd_common.cpp",
+    ],
+
+    export_include_dirs: ["include"],
+}
+
+// Default passthrough implementation for recovery. Vendors can implement
+// android.hardware.health@2.0-impl-recovery-<device> to customize the behavior
+// of the HAL in recovery.
+// The implementation does NOT start the uevent loop for polling.
+cc_library_shared {
+    name: "android.hardware.health@2.0-impl-default",
+    defaults: ["android.hardware.health@2.0-impl_defaults"],
+
+    recovery_available: true,
+    relative_install_path: "hw",
+
+    static_libs: [
+        "android.hardware.health@2.0-impl",
+        "libhealthstoragedefault",
+    ],
+
+    srcs: [
+        "HealthImplDefault.cpp",
+    ],
+}
diff --git a/health/2.0/default/Health.cpp b/health/2.0/default/Health.cpp
index 6d3be99..a2b81d1 100644
--- a/health/2.0/default/Health.cpp
+++ b/health/2.0/default/Health.cpp
@@ -46,7 +46,7 @@
     }
 
     {
-        std::lock_guard<std::mutex> _lock(callbacks_lock_);
+        std::lock_guard<decltype(callbacks_lock_)> lock(callbacks_lock_);
         callbacks_.push_back(callback);
         // unlock
     }
@@ -58,14 +58,14 @@
         // ignore the error
     }
 
-    return update();
+    return updateAndNotify(callback);
 }
 
 bool Health::unregisterCallbackInternal(const sp<IBase>& callback) {
     if (callback == nullptr) return false;
 
     bool removed = false;
-    std::lock_guard<std::mutex> _lock(callbacks_lock_);
+    std::lock_guard<decltype(callbacks_lock_)> lock(callbacks_lock_);
     for (auto it = callbacks_.begin(); it != callbacks_.end();) {
         if (interfacesEqual(*it, callback)) {
             it = callbacks_.erase(it);
@@ -142,7 +142,7 @@
 Return<Result> Health::update() {
     if (!healthd_mode_ops || !healthd_mode_ops->battery_update) {
         LOG(WARNING) << "health@2.0: update: not initialized. "
-                     << "update() should not be called in charger / recovery.";
+                     << "update() should not be called in charger";
         return Result::UNKNOWN;
     }
 
@@ -156,6 +156,18 @@
     return Result::SUCCESS;
 }
 
+Return<Result> Health::updateAndNotify(const sp<IHealthInfoCallback>& callback) {
+    std::lock_guard<decltype(callbacks_lock_)> lock(callbacks_lock_);
+    std::vector<sp<IHealthInfoCallback>> storedCallbacks{std::move(callbacks_)};
+    callbacks_.clear();
+    if (callback != nullptr) {
+        callbacks_.push_back(callback);
+    }
+    Return<Result> result = update();
+    callbacks_ = std::move(storedCallbacks);
+    return result;
+}
+
 void Health::notifyListeners(HealthInfo* healthInfo) {
     std::vector<StorageInfo> info;
     get_storage_info(info);
@@ -175,7 +187,7 @@
     healthInfo->diskStats = stats;
     healthInfo->storageInfos = info;
 
-    std::lock_guard<std::mutex> _lock(callbacks_lock_);
+    std::lock_guard<decltype(callbacks_lock_)> lock(callbacks_lock_);
     for (auto it = callbacks_.begin(); it != callbacks_.end();) {
         auto ret = (*it)->healthInfoChanged(*healthInfo);
         if (!ret.isOk() && ret.isDeadObject()) {
@@ -233,7 +245,7 @@
 Return<void> Health::getHealthInfo(getHealthInfo_cb _hidl_cb) {
     using android::hardware::health::V1_0::hal_conversion::convertToHealthInfo;
 
-    update();
+    updateAndNotify(nullptr);
     struct android::BatteryProperties p = getBatteryProperties(battery_monitor_.get());
 
     V1_0::HealthInfo batteryInfo;
diff --git a/health/2.0/default/HealthImplDefault.cpp b/health/2.0/default/HealthImplDefault.cpp
new file mode 100644
index 0000000..e3cbefd
--- /dev/null
+++ b/health/2.0/default/HealthImplDefault.cpp
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <health2/Health.h>
+#include <healthd/healthd.h>
+
+using android::hardware::health::V2_0::IHealth;
+using android::hardware::health::V2_0::implementation::Health;
+
+static struct healthd_config gHealthdConfig = {
+    .batteryStatusPath = android::String8(android::String8::kEmptyString),
+    .batteryHealthPath = android::String8(android::String8::kEmptyString),
+    .batteryPresentPath = android::String8(android::String8::kEmptyString),
+    .batteryCapacityPath = android::String8(android::String8::kEmptyString),
+    .batteryVoltagePath = android::String8(android::String8::kEmptyString),
+    .batteryTemperaturePath = android::String8(android::String8::kEmptyString),
+    .batteryTechnologyPath = android::String8(android::String8::kEmptyString),
+    .batteryCurrentNowPath = android::String8(android::String8::kEmptyString),
+    .batteryCurrentAvgPath = android::String8(android::String8::kEmptyString),
+    .batteryChargeCounterPath = android::String8(android::String8::kEmptyString),
+    .batteryFullChargePath = android::String8(android::String8::kEmptyString),
+    .batteryCycleCountPath = android::String8(android::String8::kEmptyString),
+    .energyCounter = nullptr,
+    .boot_min_cap = 0,
+    .screen_on = nullptr};
+
+void healthd_board_init(struct healthd_config*) {
+    // use defaults
+}
+
+int healthd_board_battery_update(struct android::BatteryProperties*) {
+    // return 0 to log periodic polled battery status to kernel log
+    return 0;
+}
+
+void healthd_mode_default_impl_init(struct healthd_config*) {
+    // noop
+}
+
+int healthd_mode_default_impl_preparetowait(void) {
+    return -1;
+}
+
+void healthd_mode_default_impl_heartbeat(void) {
+    // noop
+}
+
+void healthd_mode_default_impl_battery_update(struct android::BatteryProperties*) {
+    // noop
+}
+
+static struct healthd_mode_ops healthd_mode_default_impl_ops = {
+    .init = healthd_mode_default_impl_init,
+    .preparetowait = healthd_mode_default_impl_preparetowait,
+    .heartbeat = healthd_mode_default_impl_heartbeat,
+    .battery_update = healthd_mode_default_impl_battery_update,
+};
+
+extern "C" IHealth* HIDL_FETCH_IHealth(const char* name) {
+    const static std::string providedInstance{"backup"};
+    healthd_mode_ops = &healthd_mode_default_impl_ops;
+    if (providedInstance == name) {
+        // use defaults
+        // Health class stores static instance
+        return Health::initInstance(&gHealthdConfig).get();
+    }
+    return nullptr;
+}
diff --git a/health/2.0/default/healthd_common.cpp b/health/2.0/default/healthd_common.cpp
index 8ff409d..b5fdc8e 100644
--- a/health/2.0/default/healthd_common.cpp
+++ b/health/2.0/default/healthd_common.cpp
@@ -67,8 +67,6 @@
 
 #define POWER_SUPPLY_SUBSYSTEM "power_supply"
 
-// epoll_create() parameter is actually unused
-#define MAX_EPOLL_EVENTS 40
 static int uevent_fd;
 static int wakealarm_fd;
 
@@ -240,9 +238,9 @@
 }
 
 static int healthd_init() {
-    epollfd = epoll_create(MAX_EPOLL_EVENTS);
+    epollfd = epoll_create1(EPOLL_CLOEXEC);
     if (epollfd == -1) {
-        KLOG_ERROR(LOG_TAG, "epoll_create failed; errno=%d\n", errno);
+        KLOG_ERROR(LOG_TAG, "epoll_create1 failed; errno=%d\n", errno);
         return -1;
     }
 
diff --git a/health/2.0/default/include/health2/Health.h b/health/2.0/default/include/health2/Health.h
index 134cdc6..6410474 100644
--- a/health/2.0/default/include/health2/Health.h
+++ b/health/2.0/default/include/health2/Health.h
@@ -31,12 +31,10 @@
     // Should only be called by implementation itself (-impl, -service).
     // Clients should not call this function. Instead, initInstance() initializes and returns the
     // global instance that has fewer functions.
-    // TODO(b/62229583): clean up and hide these functions after update() logic is simplified.
     static sp<Health> getImplementation();
 
     Health(struct healthd_config* c);
 
-    // TODO(b/62229583): clean up and hide these functions after update() logic is simplified.
     void notifyListeners(HealthInfo* info);
 
     // Methods from IHealth follow.
@@ -61,11 +59,15 @@
    private:
     static sp<Health> instance_;
 
-    std::mutex callbacks_lock_;
+    std::recursive_mutex callbacks_lock_;
     std::vector<sp<IHealthInfoCallback>> callbacks_;
     std::unique_ptr<BatteryMonitor> battery_monitor_;
 
     bool unregisterCallbackInternal(const sp<IBase>& cb);
+
+    // update() and only notify the given callback, but none of the other callbacks.
+    // If cb is null, do not notify any callback at all.
+    Return<Result> updateAndNotify(const sp<IHealthInfoCallback>& cb);
 };
 
 }  // namespace implementation
diff --git a/health/2.0/utils/README b/health/2.0/utils/README.md
similarity index 68%
rename from health/2.0/utils/README
rename to health/2.0/utils/README.md
index 1d5c27f..c59b3f3 100644
--- a/health/2.0/utils/README
+++ b/health/2.0/utils/README.md
@@ -1,28 +1,30 @@
-* libhealthhalutils
+# libhealthhalutils
 
 A convenience library for (hwbinder) clients of health HAL to choose between
 the "default" instance (served by vendor service) or "backup" instance (served
 by healthd). C++ clients of health HAL should use this library instead of
-calling IHealth::getService() directly.
+calling `IHealth::getService()` directly.
 
-Its Java equivalent can be found in BatteryService.HealthServiceWrapper.
+Its Java equivalent can be found in `BatteryService.HealthServiceWrapper`.
 
-* libhealthservice
+# libhealthservice
 
 Common code for all (hwbinder) services of the health HAL, including healthd and
-vendor health service android.hardware.health@2.0-service(.<vendor>). main() in
-those binaries calls health_service_main() directly.
+vendor health service `android.hardware.health@2.0-service(.<vendor>)`. `main()` in
+those binaries calls `health_service_main()` directly.
 
-* libhealthstoragedefault
+# libhealthstoragedefault
 
 Default implementation for storage related APIs for (hwbinder) services of the
 health HAL. If an implementation of the health HAL do not wish to provide any
 storage info, include this library. Otherwise, it should implement the following
 two functions:
 
+```c++
 void get_storage_info(std::vector<struct StorageInfo>& info) {
     // ...
 }
 void get_disk_stats(std::vector<struct DiskStats>& stats) {
     // ...
 }
+```
diff --git a/health/2.0/utils/libhealthhalutils/Android.bp b/health/2.0/utils/libhealthhalutils/Android.bp
index 5686520..449ef16 100644
--- a/health/2.0/utils/libhealthhalutils/Android.bp
+++ b/health/2.0/utils/libhealthhalutils/Android.bp
@@ -21,6 +21,7 @@
     srcs: ["HealthHalUtils.cpp"],
     cflags: ["-Wall", "-Werror"],
     vendor_available: true,
+    recovery_available: true,
     export_include_dirs: ["include"],
     shared_libs: [
         "android.hardware.health@2.0",
diff --git a/health/2.0/utils/libhealthservice/HealthServiceCommon.cpp b/health/2.0/utils/libhealthservice/HealthServiceCommon.cpp
index acb4501..039570a 100644
--- a/health/2.0/utils/libhealthservice/HealthServiceCommon.cpp
+++ b/health/2.0/utils/libhealthservice/HealthServiceCommon.cpp
@@ -23,6 +23,7 @@
 #include <health2/service.h>
 #include <healthd/healthd.h>
 #include <hidl/HidlTransportSupport.h>
+#include <hwbinder/IPCThreadState.h>
 
 using android::hardware::IPCThreadState;
 using android::hardware::configureRpcThreadpool;
diff --git a/health/2.0/utils/libhealthstoragedefault/Android.bp b/health/2.0/utils/libhealthstoragedefault/Android.bp
index cef04fe..5bc8b9f 100644
--- a/health/2.0/utils/libhealthstoragedefault/Android.bp
+++ b/health/2.0/utils/libhealthstoragedefault/Android.bp
@@ -21,6 +21,7 @@
     srcs: ["StorageHealthDefault.cpp"],
     name: "libhealthstoragedefault",
     vendor_available: true,
+    recovery_available: true,
     cflags: ["-Werror"],
     shared_libs: [
         "android.hardware.health@2.0",
diff --git a/health/2.0/vts/functional/Android.bp b/health/2.0/vts/functional/Android.bp
index 4ad01b9..3544e5f 100644
--- a/health/2.0/vts/functional/Android.bp
+++ b/health/2.0/vts/functional/Android.bp
@@ -22,4 +22,5 @@
         "android.hardware.health@1.0",
         "android.hardware.health@2.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/health/2.0/vts/functional/VtsHalHealthV2_0TargetTest.cpp b/health/2.0/vts/functional/VtsHalHealthV2_0TargetTest.cpp
index c5431e4..f895aec 100644
--- a/health/2.0/vts/functional/VtsHalHealthV2_0TargetTest.cpp
+++ b/health/2.0/vts/functional/VtsHalHealthV2_0TargetTest.cpp
@@ -192,7 +192,7 @@
 
 template <typename T>
 bool verifyEnum(T value) {
-    for (auto it : hidl_enum_iterator<T>()) {
+    for (auto it : hidl_enum_range<T>()) {
         if (it == value) {
             return true;
         }
@@ -222,38 +222,83 @@
 }
 
 /*
- * Tests the values returned by getChargeCounter(),
- * getCurrentNow(), getCurrentAverage(), getCapacity(), getEnergyCounter(),
- * getChargeStatus(), getStorageInfo(), getDiskStats() and getHealthInfo() from
- * interface IHealth.
+ * Tests the values returned by getChargeCounter() from interface IHealth.
  */
-TEST_F(HealthHidlTest, Properties) {
+TEST_F(HealthHidlTest, getChargeCounter) {
     EXPECT_OK(mHealth->getChargeCounter([](auto result, auto value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, std::to_string(value), value > 0);
     }));
+}
+
+/*
+ * Tests the values returned by getCurrentNow() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getCurrentNow) {
     EXPECT_OK(mHealth->getCurrentNow([](auto result, auto value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, std::to_string(value), value != INT32_MIN);
     }));
+}
+
+/*
+ * Tests the values returned by getCurrentAverage() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getCurrentAverage) {
     EXPECT_OK(mHealth->getCurrentAverage([](auto result, auto value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, std::to_string(value), value != INT32_MIN);
     }));
+}
+
+/*
+ * Tests the values returned by getCapacity() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getCapacity) {
     EXPECT_OK(mHealth->getCapacity([](auto result, auto value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, std::to_string(value), 0 <= value && value <= 100);
     }));
+}
+
+/*
+ * Tests the values returned by getEnergyCounter() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getEnergyCounter) {
     EXPECT_OK(mHealth->getEnergyCounter([](auto result, auto value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, std::to_string(value), value != INT64_MIN);
     }));
+}
+
+/*
+ * Tests the values returned by getChargeStatus() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getChargeStatus) {
     EXPECT_OK(mHealth->getChargeStatus([](auto result, auto value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(
             result, toString(value),
             value != BatteryStatus::UNKNOWN && verifyEnum<BatteryStatus>(value));
     }));
+}
+
+/*
+ * Tests the values returned by getStorageInfo() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getStorageInfo) {
     EXPECT_OK(mHealth->getStorageInfo([](auto result, auto& value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, toString(value), verifyStorageInfo(value));
     }));
+}
+
+/*
+ * Tests the values returned by getDiskStats() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getDiskStats) {
     EXPECT_OK(mHealth->getDiskStats([](auto result, auto& value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, toString(value), true);
     }));
+}
+
+/*
+ * Tests the values returned by getHealthInfo() from interface IHealth.
+ */
+TEST_F(HealthHidlTest, getHealthInfo) {
     EXPECT_OK(mHealth->getHealthInfo([](auto result, auto& value) {
         EXPECT_VALID_OR_UNSUPPORTED_PROP(result, toString(value), verifyHealthInfo(value));
     }));
diff --git a/health/storage/1.0/Android.bp b/health/storage/1.0/Android.bp
new file mode 100644
index 0000000..35ee34f
--- /dev/null
+++ b/health/storage/1.0/Android.bp
@@ -0,0 +1,22 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.health.storage@1.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IGarbageCollectCallback.hal",
+        "IStorage.hal",
+    ],
+    interfaces: [
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "Result",
+    ],
+    gen_java: true,
+}
+
diff --git a/health/storage/1.0/IGarbageCollectCallback.hal b/health/storage/1.0/IGarbageCollectCallback.hal
new file mode 100644
index 0000000..2c24ead
--- /dev/null
+++ b/health/storage/1.0/IGarbageCollectCallback.hal
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.health.storage@1.0;
+
+/**
+ * Callback interface to IStorage.garbageCollect.
+ */
+interface IGarbageCollectCallback {
+    /**
+     * When garbage collection has finished, the implementation must
+     * invoke this function to indicate the result of the garbage collection.
+     *
+     * @return result Execution result. See documentation for Result for
+     *     details.
+     */
+    oneway onFinish(Result result);
+};
diff --git a/health/storage/1.0/IStorage.hal b/health/storage/1.0/IStorage.hal
new file mode 100644
index 0000000..980cf45
--- /dev/null
+++ b/health/storage/1.0/IStorage.hal
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.health.storage@1.0;
+
+import IGarbageCollectCallback;
+
+/**
+ * IStorage is an interface that provides operations on underlying storage
+ * devices, including flash memory.
+ */
+interface IStorage {
+    /**
+     * Start garbage collection on the driver of storage devices.
+     *
+     * Garbage collection must be started at regular intervals when it is a good
+     * time for a longer-running cleanup tasks, roughly daily.
+     *
+     * When garbage collection finishes or encounters an error before the
+     * specified timeout, the implementation must call IGarbageCollect.finish
+     * immediately with appropriate result.
+     *
+     * If garbage collection does not finish within the specified timeout,
+     * the implementation must stop garbage collection, and must not call
+     * IGarbageCollect.finish.
+     *
+     * @param timeoutSeconds timeout in seconds. The implementation must
+     *     return after the timeout is reached.
+     *
+     * @param callback callback interface. Callback must be null if the client
+     *     does not need to receive any callbacks.
+     *
+     */
+    oneway garbageCollect(uint64_t timeoutSeconds,
+                          IGarbageCollectCallback callback);
+};
diff --git a/health/storage/1.0/default/Android.bp b/health/storage/1.0/default/Android.bp
new file mode 100644
index 0000000..4723443
--- /dev/null
+++ b/health/storage/1.0/default/Android.bp
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+cc_binary {
+    name: "android.hardware.health.storage@1.0-service",
+    vendor: true,
+    defaults: ["hidl_defaults"],
+    relative_install_path: "hw",
+    init_rc: ["android.hardware.health.storage@1.0-service.rc"],
+    srcs: [
+        "Storage.cpp",
+        "service.cpp",
+    ],
+
+    cflags: [
+        "-Wall",
+        "-Werror",
+    ],
+
+    shared_libs: [
+        "libbase",
+        "libhidlbase",
+        "libhidltransport",
+        "libutils",
+        "android.hardware.health.storage@1.0",
+    ],
+
+    static_libs: [
+        "libfstab",
+    ],
+
+    vintf_fragments: [
+        "manifest_android.hardware.health.storage@1.0.xml",
+    ],
+}
diff --git a/health/storage/1.0/default/Storage.cpp b/health/storage/1.0/default/Storage.cpp
new file mode 100644
index 0000000..2e53c50
--- /dev/null
+++ b/health/storage/1.0/default/Storage.cpp
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Storage.h"
+
+#include <sstream>
+
+#include <android-base/chrono_utils.h>
+#include <android-base/file.h>
+#include <android-base/logging.h>
+#include <android-base/strings.h>
+#include <fstab/fstab.h>
+
+namespace android {
+namespace hardware {
+namespace health {
+namespace storage {
+namespace V1_0 {
+namespace implementation {
+
+using base::ReadFileToString;
+using base::Timer;
+using base::Trim;
+using base::WriteStringToFd;
+using base::WriteStringToFile;
+
+std::string getGarbageCollectPath() {
+    std::unique_ptr<fstab, decltype(&fs_mgr_free_fstab)> fstab(fs_mgr_read_fstab_default(),
+                                                               fs_mgr_free_fstab);
+    struct fstab_rec* rec = NULL;
+
+    for (int i = 0; i < fstab->num_entries; i++) {
+        if (fs_mgr_has_sysfs_path(&fstab->recs[i])) {
+            rec = &fstab->recs[i];
+            break;
+        }
+    }
+    if (!rec) {
+        return "";
+    }
+
+    std::string path;
+    path.append(rec->sysfs_path);
+    path = path + "/manual_gc";
+
+    return path;
+}
+
+Return<void> Storage::garbageCollect(uint64_t timeoutSeconds,
+                                     const sp<IGarbageCollectCallback>& cb) {
+    Result result = Result::SUCCESS;
+    std::string path = getGarbageCollectPath();
+
+    if (path.empty()) {
+        LOG(WARNING) << "Cannot find Dev GC path";
+        result = Result::UNKNOWN_ERROR;
+    } else {
+        Timer timer;
+        LOG(INFO) << "Start Dev GC on " << path;
+        while (1) {
+            std::string require;
+            if (!ReadFileToString(path, &require)) {
+                PLOG(WARNING) << "Reading manual_gc failed in " << path;
+                result = Result::IO_ERROR;
+                break;
+            }
+            require = Trim(require);
+            if (require == "" || require == "off" || require == "disabled") {
+                LOG(DEBUG) << "No more to do Dev GC";
+                break;
+            }
+            LOG(DEBUG) << "Trigger Dev GC on " << path;
+            if (!WriteStringToFile("1", path)) {
+                PLOG(WARNING) << "Start Dev GC failed on " << path;
+                result = Result::IO_ERROR;
+                break;
+            }
+            if (timer.duration() >= std::chrono::seconds(timeoutSeconds)) {
+                LOG(WARNING) << "Dev GC timeout";
+                // Timeout is not treated as an error. Try next time.
+                break;
+            }
+            sleep(2);
+        }
+        LOG(INFO) << "Stop Dev GC on " << path;
+        if (!WriteStringToFile("0", path)) {
+            PLOG(WARNING) << "Stop Dev GC failed on " << path;
+            result = Result::IO_ERROR;
+        }
+    }
+
+    if (cb != nullptr) {
+        auto ret = cb->onFinish(result);
+        if (!ret.isOk()) {
+            LOG(WARNING) << "Cannot return result to callback: " << ret.description();
+        }
+    }
+    return Void();
+}
+
+Return<void> Storage::debug(const hidl_handle& handle, const hidl_vec<hidl_string>&) {
+    if (handle == nullptr || handle->numFds < 1) {
+        return Void();
+    }
+
+    int fd = handle->data[0];
+    std::stringstream output;
+
+    std::string path = getGarbageCollectPath();
+    if (path.empty()) {
+        output << "Cannot find Dev GC path";
+    } else {
+        std::string require;
+
+        if (ReadFileToString(path, &require)) {
+            output << path << ":" << require << std::endl;
+        }
+
+        if (WriteStringToFile("0", path)) {
+            output << "stop success" << std::endl;
+        }
+    }
+
+    if (!WriteStringToFd(output.str(), fd)) {
+        PLOG(WARNING) << "debug: cannot write to fd";
+    }
+
+    fsync(fd);
+
+    return Void();
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace storage
+}  // namespace health
+}  // namespace hardware
+}  // namespace android
diff --git a/health/storage/1.0/default/Storage.h b/health/storage/1.0/default/Storage.h
new file mode 100644
index 0000000..8c57ddb
--- /dev/null
+++ b/health/storage/1.0/default/Storage.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_HEALTH_FILESYSTEM_V1_0_FILESYSTEM_H
+#define ANDROID_HARDWARE_HEALTH_FILESYSTEM_V1_0_FILESYSTEM_H
+
+#include <android/hardware/health/storage/1.0/IStorage.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace health {
+namespace storage {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::sp;
+using ::android::hardware::hidl_handle;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+
+struct Storage : public IStorage {
+    Return<void> garbageCollect(uint64_t timeoutSeconds,
+                                const sp<IGarbageCollectCallback>& cb) override;
+    Return<void> debug(const hidl_handle& handle, const hidl_vec<hidl_string>&) override;
+};
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace storage
+}  // namespace health
+}  // namespace hardware
+}  // namespace android
+
+#endif  // ANDROID_HARDWARE_HEALTH_FILESYSTEM_V1_0_FILESYSTEM_H
diff --git a/health/storage/1.0/default/android.hardware.health.storage@1.0-service.rc b/health/storage/1.0/default/android.hardware.health.storage@1.0-service.rc
new file mode 100644
index 0000000..d5e1a29
--- /dev/null
+++ b/health/storage/1.0/default/android.hardware.health.storage@1.0-service.rc
@@ -0,0 +1,7 @@
+service vendor.health-storage-hal-1-0 /vendor/bin/hw/android.hardware.health.storage@1.0-service
+    interface android.hardware.health.storage@1.0::IStorage default
+    oneshot
+    disabled
+    class hal
+    user system
+    group system
diff --git a/health/storage/1.0/default/manifest_android.hardware.health.storage@1.0.xml b/health/storage/1.0/default/manifest_android.hardware.health.storage@1.0.xml
new file mode 100644
index 0000000..ffe854e
--- /dev/null
+++ b/health/storage/1.0/default/manifest_android.hardware.health.storage@1.0.xml
@@ -0,0 +1,11 @@
+<manifest version="1.0" type="device">
+    <hal>
+        <name>android.hardware.health.storage</name>
+        <transport>hwbinder</transport>
+        <version>1.0</version>
+        <interface>
+            <name>IStorage</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+</manifest>
diff --git a/health/storage/1.0/default/service.cpp b/health/storage/1.0/default/service.cpp
new file mode 100644
index 0000000..f4296f1
--- /dev/null
+++ b/health/storage/1.0/default/service.cpp
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <hidl/HidlLazyUtils.h>
+#include <hidl/HidlTransportSupport.h>
+#include "Storage.h"
+
+using android::OK;
+using android::sp;
+using android::status_t;
+using android::UNKNOWN_ERROR;
+using android::hardware::configureRpcThreadpool;
+using android::hardware::joinRpcThreadpool;
+using android::hardware::LazyServiceRegistrar;
+using android::hardware::health::storage::V1_0::IStorage;
+using android::hardware::health::storage::V1_0::implementation::Storage;
+
+int main() {
+    configureRpcThreadpool(1, true);
+
+    sp<IStorage> service = new Storage();
+    LazyServiceRegistrar registrar;
+    status_t result = registrar.registerService(service);
+
+    if (result != OK) {
+        return result;
+    }
+
+    joinRpcThreadpool();
+    return UNKNOWN_ERROR;
+}
diff --git a/health/storage/1.0/types.hal b/health/storage/1.0/types.hal
new file mode 100644
index 0000000..2da0871
--- /dev/null
+++ b/health/storage/1.0/types.hal
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.health.storage@1.0;
+
+/**
+ * Status values for HAL methods.
+ */
+enum Result : uint32_t {
+    /**
+     * Execution of the method is successful.
+     */
+    SUCCESS = 0,
+    /**
+     * An IO error is encountered when the HAL communicates with the device.
+     */
+    IO_ERROR,
+    /**
+     * An unknown error is encountered.
+     */
+    UNKNOWN_ERROR,
+};
diff --git a/health/storage/1.0/vts/functional/Android.bp b/health/storage/1.0/vts/functional/Android.bp
new file mode 100644
index 0000000..250a7dc
--- /dev/null
+++ b/health/storage/1.0/vts/functional/Android.bp
@@ -0,0 +1,27 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_test {
+    name: "VtsHalHealthStorageV1_0TargetTest",
+    defaults: ["VtsHalTargetTestDefaults"],
+    srcs: ["VtsHalHealthStorageV1_0TargetTest.cpp"],
+    static_libs: ["android.hardware.health.storage@1.0"],
+    shared_libs: [
+        "libhidltransport"
+    ],
+    test_suites: ["general-tests"],
+}
+
diff --git a/health/storage/1.0/vts/functional/VtsHalHealthStorageV1_0TargetTest.cpp b/health/storage/1.0/vts/functional/VtsHalHealthStorageV1_0TargetTest.cpp
new file mode 100644
index 0000000..5ad561c
--- /dev/null
+++ b/health/storage/1.0/vts/functional/VtsHalHealthStorageV1_0TargetTest.cpp
@@ -0,0 +1,193 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <VtsHalHidlTargetTestBase.h>
+#include <VtsHalHidlTargetTestEnvBase.h>
+#include <android-base/logging.h>
+#include <android/hardware/health/storage/1.0/IStorage.h>
+#include <hidl/HidlTransportSupport.h>
+#include <unistd.h>
+#include <thread>
+
+namespace android {
+namespace hardware {
+namespace health {
+namespace storage {
+namespace V1_0 {
+
+using ::std::literals::chrono_literals::operator""ms;
+
+#define ASSERT_OK(ret) ASSERT_TRUE(ret.isOk()) << ret.description()
+
+// Dev GC timeout. This is the timeout used by vold.
+const uint64_t kDevGcTimeoutSec = 120;
+const std::chrono::seconds kDevGcTimeout{kDevGcTimeoutSec};
+// Time accounted for RPC calls.
+const std::chrono::milliseconds kRpcTime{100};
+
+template <typename R>
+std::string toString(std::chrono::duration<R, std::milli> time) {
+    return std::to_string(time.count()) + "ms";
+}
+
+/** An atomic boolean flag that indicates whether a task has finished. */
+class Flag {
+   public:
+    void onFinish() {
+        std::unique_lock<std::mutex> lock(mMutex);
+        onFinishLocked(&lock);
+    }
+    template <typename R, typename P>
+    bool wait(std::chrono::duration<R, P> duration) {
+        std::unique_lock<std::mutex> lock(mMutex);
+        return waitLocked(&lock, duration);
+    }
+
+   protected:
+    /** Will unlock. */
+    void onFinishLocked(std::unique_lock<std::mutex>* lock) {
+        mFinished = true;
+        lock->unlock();
+        mCv.notify_all();
+    }
+    template <typename R, typename P>
+    bool waitLocked(std::unique_lock<std::mutex>* lock, std::chrono::duration<R, P> duration) {
+        mCv.wait_for(*lock, duration, [this] { return mFinished; });
+        return mFinished;
+    }
+
+    bool mFinished{false};
+    std::mutex mMutex;
+    std::condition_variable mCv;
+};
+
+class GcCallback : public IGarbageCollectCallback, public Flag {
+   public:
+    Return<void> onFinish(Result result) override {
+        std::unique_lock<std::mutex> lock(mMutex);
+        mResult = result;
+        Flag::onFinishLocked(&lock);
+        return Void();
+    }
+
+    /**
+     * Wait for a specific "timeout". If GC has finished, test that the result
+     * is equal to the "expected" value.
+     */
+    template <typename R, typename P>
+    void waitForResult(std::chrono::duration<R, P> timeout, Result expected) {
+        std::unique_lock<std::mutex> lock(mMutex);
+        if (waitLocked(&lock, timeout)) {
+            EXPECT_EQ(expected, mResult);
+        } else {
+            LOG(INFO) << "timeout after " << toString(timeout);
+        }
+    }
+
+   private:
+    Result mResult{Result::UNKNOWN_ERROR};
+};
+
+/** Test environment for Health Storage HIDL HAL. */
+class HealthStorageHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
+   public:
+    /** get the test environment singleton */
+    static HealthStorageHidlEnvironment* Instance() {
+        static HealthStorageHidlEnvironment* instance = new HealthStorageHidlEnvironment();
+        return instance;
+    }
+    virtual void registerTestServices() override { registerTestService<IStorage>(); }
+
+   private:
+    HealthStorageHidlEnvironment() {}
+};
+
+class HealthStorageHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+   public:
+    virtual void SetUp() override {
+        fs = ::testing::VtsHalHidlTargetTestBase::getService<IStorage>(
+            HealthStorageHidlEnvironment::Instance()->getServiceName<IStorage>());
+
+        ASSERT_NE(fs, nullptr);
+        LOG(INFO) << "Service is remote " << fs->isRemote();
+    }
+
+    virtual void TearDown() override {
+        EXPECT_TRUE(ping(kRpcTime))
+            << "Service is not responsive; expect subsequent tests to fail.";
+    }
+
+    /**
+     * Ping the service and expect it to return after "timeout". Return true
+     * iff the service is responsive within "timeout".
+     */
+    template <typename R, typename P>
+    bool ping(std::chrono::duration<R, P> timeout) {
+        // Ensure the service is responsive after the test.
+        sp<IStorage> service = fs;
+        auto pingFlag = std::make_shared<Flag>();
+        std::thread([service, pingFlag] {
+            service->ping();
+            pingFlag->onFinish();
+        })
+            .detach();
+        return pingFlag->wait(timeout);
+    }
+
+    sp<IStorage> fs;
+};
+
+/**
+ * Ensure garbage collection works on null callback.
+ */
+TEST_F(HealthStorageHidlTest, GcNullCallback) {
+    auto ret = fs->garbageCollect(kDevGcTimeoutSec, nullptr);
+
+    ASSERT_OK(ret);
+
+    // Hold test process because HAL can be single-threaded and doing GC.
+    ASSERT_TRUE(ping(kDevGcTimeout + kRpcTime))
+        << "Service must be available after " << toString(kDevGcTimeout + kRpcTime);
+}
+
+/**
+ * Ensure garbage collection works on non-null callback.
+ */
+TEST_F(HealthStorageHidlTest, GcNonNullCallback) {
+    sp<GcCallback> cb = new GcCallback();
+    auto ret = fs->garbageCollect(kDevGcTimeoutSec, cb);
+    ASSERT_OK(ret);
+    cb->waitForResult(kDevGcTimeout + kRpcTime, Result::SUCCESS);
+}
+
+}  // namespace V1_0
+}  // namespace storage
+}  // namespace health
+}  // namespace hardware
+}  // namespace android
+
+int main(int argc, char** argv) {
+    using ::android::hardware::configureRpcThreadpool;
+    using ::android::hardware::health::storage::V1_0::HealthStorageHidlEnvironment;
+
+    configureRpcThreadpool(1, false /* callerWillJoin*/);
+    ::testing::AddGlobalTestEnvironment(HealthStorageHidlEnvironment::Instance());
+    ::testing::InitGoogleTest(&argc, argv);
+    HealthStorageHidlEnvironment::Instance()->init(&argc, argv);
+    int status = RUN_ALL_TESTS();
+    LOG(INFO) << "Test result = " << status;
+    return status;
+}
diff --git a/ir/1.0/vts/functional/Android.bp b/ir/1.0/vts/functional/Android.bp
index 2a86f8e..f5c9d61 100644
--- a/ir/1.0/vts/functional/Android.bp
+++ b/ir/1.0/vts/functional/Android.bp
@@ -21,4 +21,5 @@
     static_libs: [
         "android.hardware.ir@1.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/keymaster/3.0/default/android.hardware.keymaster@3.0-service.rc b/keymaster/3.0/default/android.hardware.keymaster@3.0-service.rc
index 086ba2f..ea8d490 100644
--- a/keymaster/3.0/default/android.hardware.keymaster@3.0-service.rc
+++ b/keymaster/3.0/default/android.hardware.keymaster@3.0-service.rc
@@ -1,4 +1,4 @@
 service vendor.keymaster-3-0 /vendor/bin/hw/android.hardware.keymaster@3.0-service
     class early_hal
-    user system
-    group system drmrpc
+    user nobody
+    group drmrpc
diff --git a/keymaster/3.0/vts/functional/Android.bp b/keymaster/3.0/vts/functional/Android.bp
index 7d96704..b0371c7 100644
--- a/keymaster/3.0/vts/functional/Android.bp
+++ b/keymaster/3.0/vts/functional/Android.bp
@@ -29,4 +29,5 @@
         "libcrypto",
         "libsoftkeymasterdevice",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/keymaster/3.0/vts/functional/authorization_set.h b/keymaster/3.0/vts/functional/authorization_set.h
index 5f92d81..0c15e68 100644
--- a/keymaster/3.0/vts/functional/authorization_set.h
+++ b/keymaster/3.0/vts/functional/authorization_set.h
@@ -201,7 +201,7 @@
     void push_back(TypedTag<TagType::BYTES, tag> ttag, const uint8_t* data, size_t data_length) {
         hidl_vec<uint8_t> new_blob;
         new_blob.setToExternal(const_cast<uint8_t*>(data), data_length);
-        push_back(ttag, std::move(new_blob));
+        push_back(ttag, new_blob);
     }
 
     /**
@@ -225,8 +225,7 @@
     }
 
     hidl_vec<KeyParameter> hidl_data() const {
-        hidl_vec<KeyParameter> result;
-        result.setToExternal(const_cast<KeyParameter*>(data()), size());
+        hidl_vec<KeyParameter> result(begin(), end());
         return result;
     }
 
@@ -252,7 +251,7 @@
                                            size_t data_length) {
         hidl_vec<uint8_t> new_blob;
         new_blob.setToExternal(const_cast<uint8_t*>(data), data_length);
-        push_back(ttag, std::move(new_blob));
+        push_back(ttag, new_blob);
         return *this;
     }
 
@@ -262,6 +261,12 @@
         return Authorization(ttag, reinterpret_cast<const uint8_t*>(data), data_length);
     }
 
+    template <Tag tag>
+    AuthorizationSetBuilder& Authorization(TypedTag<TagType::BYTES, tag> ttag, char* data,
+                                           size_t data_length) {
+        return Authorization(ttag, reinterpret_cast<const uint8_t*>(data), data_length);
+    }
+
     AuthorizationSetBuilder& Authorizations(AuthorizationSet&& set);
     AuthorizationSetBuilder& Authorizations(const AuthorizationSet& set);
 
diff --git a/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp b/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp
index 7cdf253..ccb5622 100644
--- a/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp
+++ b/keymaster/3.0/vts/functional/keymaster_hidl_hal_test.cpp
@@ -295,7 +295,7 @@
 }
 
 bool verify_chain(const hidl_vec<hidl_vec<uint8_t>>& chain) {
-    for (size_t i = 0; i < chain.size() - 1; ++i) {
+    for (size_t i = 0; i < chain.size(); ++i) {
         X509_Ptr key_cert(parse_cert_blob(chain[i]));
         X509_Ptr signing_cert;
         if (i < chain.size() - 1) {
@@ -1083,7 +1083,7 @@
         AuthorizationSet auths(keyCharacteristics.teeEnforced);
         auths.push_back(AuthorizationSet(keyCharacteristics.softwareEnforced));
 
-        if (!SupportsSymmetric() && asymmetric) {
+        if (IsSecure() && !SupportsSymmetric() && asymmetric) {
             EXPECT_TRUE(auths.Contains(TAG_ORIGIN, KeyOrigin::UNKNOWN));
         } else {
             EXPECT_TRUE(auths.Contains(TAG_ORIGIN, KeyOrigin::GENERATED));
diff --git a/keymaster/3.0/vts/functional/keymaster_tags.h b/keymaster/3.0/vts/functional/keymaster_tags.h
index f241ef1..8544bf7 100644
--- a/keymaster/3.0/vts/functional/keymaster_tags.h
+++ b/keymaster/3.0/vts/functional/keymaster_tags.h
@@ -274,7 +274,10 @@
  */
 template <typename ValueT> class NullOr {
     template <typename T> struct reference_initializer {
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wnull-dereference"
         static T&& init() { return *static_cast<std::remove_reference_t<T>*>(nullptr); }
+#pragma GCC diagnostic pop
     };
     template <typename T> struct pointer_initializer {
         static T init() { return nullptr; }
diff --git a/keymaster/4.0/IKeymasterDevice.hal b/keymaster/4.0/IKeymasterDevice.hal
index 85a25c6..c867ab0 100644
--- a/keymaster/4.0/IKeymasterDevice.hal
+++ b/keymaster/4.0/IKeymasterDevice.hal
@@ -168,7 +168,7 @@
  * startup, preferably by the bootloader.  This bitstring must be cryptographically bound to every
  * key managed by the IKeymasterDevice.  As above, the recommended mechanism for this cryptographic
  * binding is to include the Root of Trust data in the input to the key derivation function used to
- * derive a key that is used to encryp the private/secret key material.
+ * derive a key that is used to encrypt the private/secret key material.
  *
  * The root of trust consists of a bitstring that must be derived from the public key used by
  * Verified Boot to verify the signature on the boot image and from the the lock state of the
@@ -386,7 +386,7 @@
      * Generates a new cryptographic key, specifying associated parameters, which must be
      * cryptographically bound to the key.  IKeymasterDevice implementations must disallow any use
      * of a key in any way inconsistent with the authorizations specified at generation time.  With
-     * respect to parameters that the secure environment cannot enforce, the secure envionment's
+     * respect to parameters that the secure environment cannot enforce, the secure environment's
      * obligation is limited to ensuring that the unenforceable parameters associated with the key
      * cannot be modified, so that every call to getKeyCharacteristics returns the original
      * values.  In addition, the characteristics returned by generateKey places parameters correctly
@@ -433,7 +433,7 @@
      *   supported for RSA keys.
      *
      * o Tag::DIGEST specifies digest algorithms that may be used with the new key.  TEE
-     *   IKeymasterDevice implementatiosn must support all Digest values (see types.hal) for RSA
+     *   IKeymasterDevice implementations must support all Digest values (see types.hal) for RSA
      *   keys.  StrongBox IKeymasterDevice implementations must support SHA_2_256.
      *
      * o Tag::PADDING specifies the padding modes that may be used with the new
@@ -495,13 +495,13 @@
      *
      * @param keyFormat The format of the key material to import.  See KeyFormat in types.hal.
      *
-     * @pram keyData The key material to import, in the format specifed in keyFormat.
+     * @pram keyData The key material to import, in the format specified in keyFormat.
      *
      * @return keyBlob Opaque descriptor of the imported key.  The recommended implementation
      *         strategy is to include an encrypted copy of the key material, wrapped in a key
      *         unavailable outside secure hardware.
      *
-     * @return keyCharacteristics Decription of the generated key.  See the getKeyCharacteristics
+     * @return keyCharacteristics Description of the generated key.  See the getKeyCharacteristics
      *         method below.
      */
     importKey(vec<KeyParameter> keyParams, KeyFormat keyFormat, vec<uint8_t> keyData)
@@ -615,7 +615,7 @@
      *        value, it must be computationally infeasible for the secure hardware to obtain the key
      *        material.
      *
-     * @return keyCharacteristics Decription of the generated key.  See KeyCharacteristics in
+     * @return keyCharacteristics Description of the generated key.  See KeyCharacteristics in
      *         types.hal.
      */
     getKeyCharacteristics(vec<uint8_t> keyBlob, vec<uint8_t> clientId, vec<uint8_t> appData)
@@ -815,7 +815,7 @@
      * any one of them is higher than the corresponding current device value upgradeKey() must
      * return ErrorCode::INVALID_ARGUMENT.  There is one exception: it is always permissible to
      * "downgrade" from any OS_VERSION number to OS_VERSION 0.  For example, if the key has
-     * OS_VERSION 080001, it is permisible to upgrade the key if the current system version is
+     * OS_VERSION 080001, it is permissible to upgrade the key if the current system version is
      * 080100, because the new version is larger, or if the current system version is 0, because
      * upgrades to 0 are always allowed.  If the system version were 080000, however, keymaster must
      * return ErrorCode::INVALID_ARGUMENT because that value is smaller than 080001.  Values other
@@ -1040,7 +1040,7 @@
      * authorizations contain Tag::CALLER_NONCE, then the caller may provide an IV/nonce with
      * Tag::NONCE in inParams.  If a nonce is provided when Tag::CALLER_NONCE is not authorized,
      * begin() must return ErrorCode::CALLER_NONCE_PROHIBITED.  If a nonce is not provided when
-     * Tag::CALLER_NONCE is authorized, IKeymasterDevice msut generate a random IV/nonce.
+     * Tag::CALLER_NONCE is authorized, IKeymasterDevice must generate a random IV/nonce.
      *
      * -- HMAC keys --
      *
@@ -1082,7 +1082,7 @@
 
     /**
      * Provides data to, and possibly receives output from, an ongoing cryptographic operation begun
-     * with begin().  The operation is specified by the operationHandle paramater.
+     * with begin().  The operation is specified by the operationHandle parameter.
      *
      * If operationHandle is invalid, update() must return ErrorCode::INVALID_OPERATION_HANDLE.
      *
diff --git a/keymaster/4.0/support/Keymaster.cpp b/keymaster/4.0/support/Keymaster.cpp
index 444298b..9325cc0 100644
--- a/keymaster/4.0/support/Keymaster.cpp
+++ b/keymaster/4.0/support/Keymaster.cpp
@@ -164,10 +164,10 @@
                     sharingCheck = curSharingCheck;
                     firstKeymaster = false;
                 }
-                CHECK(curSharingCheck == sharingCheck)
-                    << "HMAC computation failed for " << *keymaster  //
-                    << " Expected: " << sharingCheck                 //
-                    << " got: " << curSharingCheck;
+                if (curSharingCheck != sharingCheck)
+                    LOG(WARNING) << "HMAC computation failed for " << *keymaster  //
+                                 << " Expected: " << sharingCheck                 //
+                                 << " got: " << curSharingCheck;
             });
         CHECK(rc.isOk()) << "Failed to communicate with " << *keymaster
                          << " error: " << rc.description();
diff --git a/keymaster/4.0/support/authorization_set.cpp b/keymaster/4.0/support/authorization_set.cpp
index bf77420..d6b50f5 100644
--- a/keymaster/4.0/support/authorization_set.cpp
+++ b/keymaster/4.0/support/authorization_set.cpp
@@ -18,6 +18,8 @@
 
 #include <assert.h>
 
+#include <android-base/logging.h>
+
 namespace android {
 namespace hardware {
 namespace keymaster {
@@ -97,10 +99,10 @@
         if (prev->tag == Tag::INVALID) continue;
 
         if (!keyParamEqual(*prev, *curr)) {
-            result.emplace_back(std::move(*prev));
+            result.push_back(std::move(*prev));
         }
     }
-    result.emplace_back(std::move(*prev));
+    result.push_back(std::move(*prev));
 
     std::swap(data_, result);
 }
@@ -127,6 +129,16 @@
     }
 }
 
+void AuthorizationSet::Filter(std::function<bool(const KeyParameter&)> doKeep) {
+    std::vector<KeyParameter> result;
+    for (auto& param : data_) {
+        if (doKeep(param)) {
+            result.push_back(std::move(param));
+        }
+    }
+    std::swap(data_, result);
+}
+
 KeyParameter& AuthorizationSet::operator[](int at) {
     return data_[at];
 }
@@ -191,6 +203,7 @@
 struct OutStreams {
     std::ostream& indirect;
     std::ostream& elements;
+    size_t skipped;
 };
 
 OutStreams& serializeParamValue(OutStreams& out, const hidl_vec<uint8_t>& blob) {
@@ -229,6 +242,7 @@
 
 OutStreams& serialize(TAG_INVALID_t&&, OutStreams& out, const KeyParameter&) {
     // skip invalid entries.
+    ++out.skipped;
     return out;
 }
 template <typename T>
@@ -248,7 +262,12 @@
 
 template <>
 struct choose_serializer<> {
-    static OutStreams& serialize(OutStreams& out, const KeyParameter&) { return out; }
+    static OutStreams& serialize(OutStreams& out, const KeyParameter& param) {
+        LOG(WARNING) << "Trying to serialize unknown tag " << unsigned(param.tag)
+                     << ". Did you forget to add it to all_tags_t?";
+        ++out.skipped;
+        return out;
+    }
 };
 
 template <TagType tag_type, Tag tag, typename... Tail>
@@ -269,7 +288,7 @@
 std::ostream& serialize(std::ostream& out, const std::vector<KeyParameter>& params) {
     std::stringstream indirect;
     std::stringstream elements;
-    OutStreams streams = {indirect, elements};
+    OutStreams streams = {indirect, elements, 0};
     for (const auto& param : params) {
         serialize(streams, param);
     }
@@ -289,7 +308,7 @@
         return out;
     }
     uint32_t elements_size = pos;
-    uint32_t element_count = params.size();
+    uint32_t element_count = params.size() - streams.skipped;
 
     out.write(reinterpret_cast<const char*>(&indirect_size), sizeof(uint32_t));
 
@@ -310,6 +329,7 @@
 struct InStreams {
     std::istream& indirect;
     std::istream& elements;
+    size_t invalids;
 };
 
 InStreams& deserializeParamValue(InStreams& in, hidl_vec<uint8_t>* blob) {
@@ -331,6 +351,7 @@
 
 InStreams& deserialize(TAG_INVALID_t&&, InStreams& in, KeyParameter*) {
     // there should be no invalid KeyParamaters but if handle them as zero sized.
+    ++in.invalids;
     return in;
 }
 
@@ -398,13 +419,28 @@
     // TODO write one-shot stream buffer to avoid copying here
     std::stringstream indirect(indirect_buffer);
     std::stringstream elements(elements_buffer);
-    InStreams streams = {indirect, elements};
+    InStreams streams = {indirect, elements, 0};
 
     params->resize(element_count);
 
     for (uint32_t i = 0; i < element_count; ++i) {
         deserialize(streams, &(*params)[i]);
     }
+
+    /*
+     * There are legacy blobs which have invalid tags in them due to a bug during serialization.
+     * This makes sure that invalid tags are filtered from the result before it is returned.
+     */
+    if (streams.invalids > 0) {
+        std::vector<KeyParameter> filtered(element_count - streams.invalids);
+        auto ifiltered = filtered.begin();
+        for (auto& p : *params) {
+            if (p.tag != Tag::INVALID) {
+                *ifiltered++ = std::move(p);
+            }
+        }
+        *params = std::move(filtered);
+    }
     return in;
 }
 
@@ -523,8 +559,7 @@
     return *this;
 }
 
-AuthorizationSetBuilder& AuthorizationSetBuilder::Digest(
-    std::initializer_list<V4_0::Digest> digests) {
+AuthorizationSetBuilder& AuthorizationSetBuilder::Digest(std::vector<V4_0::Digest> digests) {
     for (auto digest : digests) {
         push_back(TAG_DIGEST, digest);
     }
diff --git a/keymaster/4.0/support/include/keymasterV4_0/Keymaster.h b/keymaster/4.0/support/include/keymasterV4_0/Keymaster.h
index 83b1d69..458053a 100644
--- a/keymaster/4.0/support/include/keymasterV4_0/Keymaster.h
+++ b/keymaster/4.0/support/include/keymasterV4_0/Keymaster.h
@@ -20,6 +20,9 @@
 
 #include <android/hardware/keymaster/4.0/IKeymasterDevice.h>
 
+#include <memory>
+#include <vector>
+
 namespace android {
 namespace hardware {
 namespace keymaster {
diff --git a/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h b/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h
index 6c7fd35..ff08066 100644
--- a/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h
+++ b/keymaster/4.0/support/include/keymasterV4_0/authorization_set.h
@@ -46,7 +46,7 @@
     AuthorizationSet(const AuthorizationSet& other) : data_(other.data_) {}
 
     // Move constructor.
-    AuthorizationSet(AuthorizationSet&& other) : data_(std::move(other.data_)) {}
+    AuthorizationSet(AuthorizationSet&& other) noexcept : data_(std::move(other.data_)) {}
 
     // Constructor from hidl_vec<KeyParameter>
     AuthorizationSet(const hidl_vec<KeyParameter>& other) { *this = other; }
@@ -58,7 +58,7 @@
     }
 
     // Move assignment.
-    AuthorizationSet& operator=(AuthorizationSet&& other) {
+    AuthorizationSet& operator=(AuthorizationSet&& other) noexcept {
         data_ = std::move(other.data_);
         return *this;
     }
@@ -142,6 +142,11 @@
     std::vector<KeyParameter>::const_iterator end() const { return data_.end(); }
 
     /**
+     * Modifies this Authorization set such that it only keeps the entries for which doKeep
+     * returns true.
+     */
+    void Filter(std::function<bool(const KeyParameter&)> doKeep);
+    /**
      * Returns the nth element of the set.
      * Like for std::vector::operator[] there is no range check performed. Use of out of range
      * indices is undefined.
@@ -210,8 +215,7 @@
     }
 
     hidl_vec<KeyParameter> hidl_data() const {
-        hidl_vec<KeyParameter> result;
-        result.setToExternal(const_cast<KeyParameter*>(data()), size());
+        hidl_vec<KeyParameter> result(begin(), end());
         return result;
     }
 
@@ -237,7 +241,7 @@
                                            size_t data_length) {
         hidl_vec<uint8_t> new_blob;
         new_blob.setToExternal(const_cast<uint8_t*>(data), data_length);
-        push_back(ttag, std::move(new_blob));
+        push_back(ttag, new_blob);
         return *this;
     }
 
@@ -247,6 +251,12 @@
         return Authorization(ttag, reinterpret_cast<const uint8_t*>(data), data_length);
     }
 
+    template <Tag tag>
+    AuthorizationSetBuilder& Authorization(TypedTag<TagType::BYTES, tag> ttag, char* data,
+                                           size_t data_length) {
+        return Authorization(ttag, reinterpret_cast<const uint8_t*>(data), data_length);
+    }
+
     AuthorizationSetBuilder& Authorizations(const AuthorizationSet& set) {
         for (const auto& entry : set) {
             push_back(entry);
@@ -278,7 +288,7 @@
     AuthorizationSetBuilder& GcmModeMacLen(uint32_t macLength);
 
     AuthorizationSetBuilder& BlockMode(std::initializer_list<BlockMode> blockModes);
-    AuthorizationSetBuilder& Digest(std::initializer_list<Digest> digests);
+    AuthorizationSetBuilder& Digest(std::vector<Digest> digests);
     AuthorizationSetBuilder& Padding(std::initializer_list<PaddingMode> paddings);
 
     template <typename... T>
diff --git a/keymaster/4.0/support/include/keymasterV4_0/keymaster_tags.h b/keymaster/4.0/support/include/keymasterV4_0/keymaster_tags.h
index 9e7d252..97dab68 100644
--- a/keymaster/4.0/support/include/keymasterV4_0/keymaster_tags.h
+++ b/keymaster/4.0/support/include/keymasterV4_0/keymaster_tags.h
@@ -122,6 +122,7 @@
 DECLARE_TYPED_TAG(CREATION_DATETIME);
 DECLARE_TYPED_TAG(DIGEST);
 DECLARE_TYPED_TAG(EC_CURVE);
+DECLARE_TYPED_TAG(HARDWARE_TYPE);
 DECLARE_TYPED_TAG(INCLUDE_UNIQUE_ID);
 DECLARE_TYPED_TAG(INVALID);
 DECLARE_TYPED_TAG(KEY_SIZE);
@@ -162,12 +163,13 @@
              TAG_USER_SECURE_ID_t, TAG_NO_AUTH_REQUIRED_t, TAG_AUTH_TIMEOUT_t,
              TAG_ALLOW_WHILE_ON_BODY_t, TAG_UNLOCKED_DEVICE_REQUIRED_t, TAG_APPLICATION_ID_t,
              TAG_APPLICATION_DATA_t, TAG_CREATION_DATETIME_t, TAG_ROLLBACK_RESISTANCE_t,
-             TAG_ROOT_OF_TRUST_t, TAG_ASSOCIATED_DATA_t, TAG_NONCE_t, TAG_BOOTLOADER_ONLY_t,
-             TAG_OS_VERSION_t, TAG_OS_PATCHLEVEL_t, TAG_UNIQUE_ID_t, TAG_ATTESTATION_CHALLENGE_t,
-             TAG_ATTESTATION_APPLICATION_ID_t, TAG_RESET_SINCE_ID_ROTATION_t, TAG_PURPOSE_t,
-             TAG_ALGORITHM_t, TAG_BLOCK_MODE_t, TAG_DIGEST_t, TAG_PADDING_t,
-             TAG_BLOB_USAGE_REQUIREMENTS_t, TAG_ORIGIN_t, TAG_USER_AUTH_TYPE_t, TAG_EC_CURVE_t,
-             TAG_BOOT_PATCHLEVEL_t, TAG_VENDOR_PATCHLEVEL_t, TAG_TRUSTED_USER_PRESENCE_REQUIRED_t>;
+             TAG_HARDWARE_TYPE_t, TAG_ROOT_OF_TRUST_t, TAG_ASSOCIATED_DATA_t, TAG_NONCE_t,
+             TAG_BOOTLOADER_ONLY_t, TAG_OS_VERSION_t, TAG_OS_PATCHLEVEL_t, TAG_UNIQUE_ID_t,
+             TAG_ATTESTATION_CHALLENGE_t, TAG_ATTESTATION_APPLICATION_ID_t,
+             TAG_RESET_SINCE_ID_ROTATION_t, TAG_PURPOSE_t, TAG_ALGORITHM_t, TAG_BLOCK_MODE_t,
+             TAG_DIGEST_t, TAG_PADDING_t, TAG_BLOB_USAGE_REQUIREMENTS_t, TAG_ORIGIN_t,
+             TAG_USER_AUTH_TYPE_t, TAG_EC_CURVE_t, TAG_BOOT_PATCHLEVEL_t, TAG_VENDOR_PATCHLEVEL_t,
+             TAG_TRUSTED_CONFIRMATION_REQUIRED_t, TAG_TRUSTED_USER_PRESENCE_REQUIRED_t>;
 
 template <typename TypedTagType>
 struct TypedTag2ValueType;
@@ -220,6 +222,7 @@
 MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_PADDING, f.paddingMode)
 MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_PURPOSE, f.purpose)
 MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_USER_AUTH_TYPE, f.hardwareAuthenticatorType)
+MAKE_TAG_ENUM_VALUE_ACCESSOR(TAG_HARDWARE_TYPE, f.hardwareType)
 
 template <TagType tag_type, Tag tag, typename ValueT>
 inline KeyParameter makeKeyParameter(TypedTag<tag_type, tag> ttag, ValueT&& value) {
@@ -279,7 +282,10 @@
 class NullOr {
     template <typename T>
     struct reference_initializer {
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wnull-dereference"
         static T&& init() { return *static_cast<std::remove_reference_t<T>*>(nullptr); }
+#pragma GCC diagnostic pop
     };
     template <typename T>
     struct pointer_initializer {
diff --git a/keymaster/4.0/support/include/keymasterV4_0/keymaster_utils.h b/keymaster/4.0/support/include/keymasterV4_0/keymaster_utils.h
index 90a0f1b..5e5ae8d 100644
--- a/keymaster/4.0/support/include/keymasterV4_0/keymaster_utils.h
+++ b/keymaster/4.0/support/include/keymasterV4_0/keymaster_utils.h
@@ -33,25 +33,19 @@
 
 namespace support {
 
-inline static hidl_vec<uint8_t> blob2hidlVec(const uint8_t* data, const size_t length,
-                                             bool inPlace = true) {
-    hidl_vec<uint8_t> result;
-    result.setToExternal(const_cast<unsigned char*>(data), length, !inPlace);
+inline static hidl_vec<uint8_t> blob2hidlVec(const uint8_t* data, const size_t length) {
+    hidl_vec<uint8_t> result(data, data + length);
     return result;
 }
 
-inline static hidl_vec<uint8_t> blob2hidlVec(const std::string& value, bool inPlace = true) {
-    hidl_vec<uint8_t> result;
-    result.setToExternal(const_cast<uint8_t*>(reinterpret_cast<const uint8_t*>(value.data())),
-                         static_cast<size_t>(value.size()), !inPlace);
+inline static hidl_vec<uint8_t> blob2hidlVec(const std::string& value) {
+    hidl_vec<uint8_t> result(reinterpret_cast<const uint8_t*>(value.data()),
+                             reinterpret_cast<const uint8_t*>(value.data()) + value.size());
     return result;
 }
 
-inline static hidl_vec<uint8_t> blob2hidlVec(const std::vector<uint8_t>& blob,
-                                             bool inPlace = true) {
-    hidl_vec<uint8_t> result;
-    result.setToExternal(const_cast<uint8_t*>(blob.data()), static_cast<size_t>(blob.size()),
-                         !inPlace);
+inline static hidl_vec<uint8_t> blob2hidlVec(const std::vector<uint8_t>& blob) {
+    hidl_vec<uint8_t> result(blob.data(), blob.data() + static_cast<size_t>(blob.size()));
     return result;
 }
 
diff --git a/keymaster/4.0/vts/functional/Android.bp b/keymaster/4.0/vts/functional/Android.bp
index d74a16f..333e408 100644
--- a/keymaster/4.0/vts/functional/Android.bp
+++ b/keymaster/4.0/vts/functional/Android.bp
@@ -29,4 +29,5 @@
         "libkeymaster4support",
         "libsoftkeymasterdevice",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp b/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp
index 6ed61da..995ae4f 100644
--- a/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp
+++ b/keymaster/4.0/vts/functional/KeymasterHidlTest.cpp
@@ -672,8 +672,7 @@
     return {EcCurve::P_224, EcCurve::P_384, EcCurve::P_521};
 }
 
-std::initializer_list<Digest> KeymasterHidlTest::ValidDigests(bool withNone, bool withMD5) {
-    std::vector<Digest> result;
+std::vector<Digest> KeymasterHidlTest::ValidDigests(bool withNone, bool withMD5) {
     switch (SecLevel()) {
         case SecurityLevel::TRUSTED_ENVIRONMENT:
             if (withNone) {
diff --git a/keymaster/4.0/vts/functional/KeymasterHidlTest.h b/keymaster/4.0/vts/functional/KeymasterHidlTest.h
index 94beb21..4cd6a5b 100644
--- a/keymaster/4.0/vts/functional/KeymasterHidlTest.h
+++ b/keymaster/4.0/vts/functional/KeymasterHidlTest.h
@@ -214,7 +214,7 @@
     std::vector<EcCurve> ValidCurves();
     std::vector<EcCurve> InvalidCurves();
 
-    std::initializer_list<Digest> ValidDigests(bool withNone, bool withMD5);
+    std::vector<Digest> ValidDigests(bool withNone, bool withMD5);
     std::vector<Digest> InvalidDigests();
 
     HidlBuf key_blob_;
diff --git a/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp b/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
index 89bcca6..784ae30 100644
--- a/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
+++ b/keymaster/4.0/vts/functional/keymaster_hidl_hal_test.cpp
@@ -751,6 +751,7 @@
  * presented.
  */
 TEST_F(SigningOperationsTest, NoUserConfirmation) {
+    if (SecLevel() == SecurityLevel::STRONGBOX) return;
     ASSERT_EQ(ErrorCode::OK, GenerateKey(AuthorizationSetBuilder()
                                              .RsaSigningKey(1024, 65537)
                                              .Digest(Digest::NONE)
diff --git a/light/2.0/vts/functional/Android.bp b/light/2.0/vts/functional/Android.bp
index e0ec4cf..9f03d27 100644
--- a/light/2.0/vts/functional/Android.bp
+++ b/light/2.0/vts/functional/Android.bp
@@ -19,5 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalLightV2_0TargetTest.cpp"],
     static_libs: ["android.hardware.light@2.0"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/light/utils/main.cpp b/light/utils/main.cpp
index 724e0ee..d07e799 100644
--- a/light/utils/main.cpp
+++ b/light/utils/main.cpp
@@ -55,6 +55,5 @@
         }
     });
 
-    // b/77934844: Avoid running static destructors.
-    _exit(1);
+    return 0;
 }
diff --git a/media/1.0/Android.bp b/media/1.0/Android.bp
index c5d49b6..45fedb9 100644
--- a/media/1.0/Android.bp
+++ b/media/1.0/Android.bp
@@ -17,6 +17,6 @@
         "AnwBufferAttributes",
         "Rect",
     ],
-    gen_java: false,
+    gen_java: true,
 }
 
diff --git a/media/omx/1.0/vts/functional/audio/Android.bp b/media/omx/1.0/vts/functional/audio/Android.bp
index f517fa1..7418bb4 100644
--- a/media/omx/1.0/vts/functional/audio/Android.bp
+++ b/media/omx/1.0/vts/functional/audio/Android.bp
@@ -21,6 +21,7 @@
         "VtsHalMediaOmxV1_0TargetAudioEncTest.cpp",
         "media_audio_hidl_test_common.cpp"
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -30,6 +31,7 @@
         "VtsHalMediaOmxV1_0TargetAudioDecTest.cpp",
         "media_audio_hidl_test_common.cpp"
     ],
+    test_suites: ["general-tests"],
 }
 
 
diff --git a/media/omx/1.0/vts/functional/audio/VtsHalMediaOmxV1_0TargetAudioDecTest.cpp b/media/omx/1.0/vts/functional/audio/VtsHalMediaOmxV1_0TargetAudioDecTest.cpp
index e851a7c..4543c01 100644
--- a/media/omx/1.0/vts/functional/audio/VtsHalMediaOmxV1_0TargetAudioDecTest.cpp
+++ b/media/omx/1.0/vts/functional/audio/VtsHalMediaOmxV1_0TargetAudioDecTest.cpp
@@ -297,6 +297,7 @@
             setupAACPort(omxNode, portIndex, OMX_AUDIO_AACObjectNull,
                          OMX_AUDIO_AACStreamFormatMP4FF, nChannels, 0,
                          nSampleRate);
+            break;
         default:
             break;
     }
diff --git a/media/omx/1.0/vts/functional/component/Android.bp b/media/omx/1.0/vts/functional/component/Android.bp
index f76b6e9..970eabe 100644
--- a/media/omx/1.0/vts/functional/component/Android.bp
+++ b/media/omx/1.0/vts/functional/component/Android.bp
@@ -18,5 +18,6 @@
     name: "VtsHalMediaOmxV1_0TargetComponentTest",
     defaults: ["VtsHalMediaOmxV1_0Defaults"],
     srcs: ["VtsHalMediaOmxV1_0TargetComponentTest.cpp"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/media/omx/1.0/vts/functional/master/Android.bp b/media/omx/1.0/vts/functional/master/Android.bp
index 4a45e69..cf3f15d 100644
--- a/media/omx/1.0/vts/functional/master/Android.bp
+++ b/media/omx/1.0/vts/functional/master/Android.bp
@@ -18,5 +18,6 @@
     name: "VtsHalMediaOmxV1_0TargetMasterTest",
     defaults: ["VtsHalMediaOmxV1_0Defaults"],
     srcs: ["VtsHalMediaOmxV1_0TargetMasterTest.cpp"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/media/omx/1.0/vts/functional/video/Android.bp b/media/omx/1.0/vts/functional/video/Android.bp
index f0da2b3..c7e0424 100644
--- a/media/omx/1.0/vts/functional/video/Android.bp
+++ b/media/omx/1.0/vts/functional/video/Android.bp
@@ -21,6 +21,7 @@
         "VtsHalMediaOmxV1_0TargetVideoDecTest.cpp",
         "media_video_hidl_test_common.cpp"
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -33,4 +34,5 @@
     static_libs: [
         "libnativewindow",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/memtrack/1.0/vts/functional/Android.bp b/memtrack/1.0/vts/functional/Android.bp
index 2d833e7..d682e0b 100644
--- a/memtrack/1.0/vts/functional/Android.bp
+++ b/memtrack/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalMemtrackV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.memtrack@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/neuralnetworks/1.0/IPreparedModel.hal b/neuralnetworks/1.0/IPreparedModel.hal
index ee406fb..ecaa7f8 100644
--- a/neuralnetworks/1.0/IPreparedModel.hal
+++ b/neuralnetworks/1.0/IPreparedModel.hal
@@ -42,6 +42,12 @@
      * execute function. This callback must be provided with the ErrorStatus of
      * the execution.
      *
+     * If the prepared model was prepared from a model wherein all
+     * tensor operands have fully specified dimensions, and the inputs
+     * to the function are valid, then the execution should launch
+     * and complete successfully (ErrorStatus::NONE). There must be
+     * no failure unless the device itself is in a bad state.
+     *
      * Multiple threads can call the execute function on the same IPreparedModel
      * object concurrently with different requests.
      *
diff --git a/neuralnetworks/1.0/types.hal b/neuralnetworks/1.0/types.hal
index 1ae1726..0880b2f 100644
--- a/neuralnetworks/1.0/types.hal
+++ b/neuralnetworks/1.0/types.hal
@@ -68,6 +68,7 @@
  * The type of an operation in a model.
  */
 enum OperationType : int32_t {
+
     /**
      * Adds two tensors, element-wise.
      *
@@ -105,6 +106,8 @@
      *
      * Outputs:
      * * 0: The sum, a tensor of the same {@link OperandType} as input0.
+     *
+     * Available since API level 27.
      */
     ADD = 0,
 
@@ -116,8 +119,10 @@
      *
      * The values in the output tensor are computed as:
      *
-     *     output[batch, row, col, channel] =
-     *         sum_{i, j}(input[batch, row + i, col + j, channel]) / sum(1)
+     *     output[b, i, j, channel] =
+     *         sum_{di, dj}(
+     *             input[b, strides[1] * i + di, strides[2] * j + dj, channel]
+     *         ) / sum(1)
      *
      * Supported tensor {@link OperandType}:
      * * {@link OperandType::TENSOR_FLOAT32}
@@ -171,7 +176,9 @@
      *
      * Outputs:
      * * 0: The output 4-D tensor, of shape
-            [batches, out_height, out_width, depth].
+     *      [batches, out_height, out_width, depth].
+     *
+     * Available since API level 27.
      */
     AVERAGE_POOL_2D = 1,
 
@@ -198,6 +205,8 @@
      * Outputs:
      * * 0: The output, a tensor of the same {@link OperandType} as the input
      *      tensors. The output shape is [D0, D1, ..., sum(Daxis(i)), ..., Dm].
+     *
+     * Available since API level 27.
      */
     CONCATENATION = 2,
 
@@ -213,12 +222,11 @@
      *
      * The values in the output tensor are computed as:
      *
-     *     output[batch, row, col, channel] =
-     *         sum_{i, j} (
-     *             input[batch, row + i, col + j, k] *
-     *             filter[channel, row + i, col + j, k] +
-     *             bias[channel]
-     *         )
+     *     output[b, i, j, channel] =
+     *         sum_{di, dj, k} (
+     *             input[b, strides[1] * i + di, strides[2] * j + dj, k] *
+     *             filter[channel, di, dj, k]
+     *         ) + bias[channel]
      *
      * Supported tensor {@link OperandType}:
      * * {@link OperandType::TENSOR_FLOAT32}
@@ -274,7 +282,7 @@
      * * 4: An {@link OperandType::INT32} scalar, specifying the stride when
      *      walking through input in the ‘width’ dimension.
      * * 5: An {@link OperandType::INT32} scalar, specifying the stride when
-    *       walking through input in the ‘height’ dimension.
+     *      walking through input in the ‘height’ dimension.
      * * 6: An {@link OperandType::INT32} scalar, and has to be one of the
      *      {@link FusedActivationFunc} values. Specifies the activation to
      *      invoke on the result.
@@ -284,6 +292,8 @@
      *      [batches, out_height, out_width, depth_out]. For output tensor of
      *      {@link OperandType::TENSOR_QUANT8_ASYMM}, the following condition
      *      must be satisfied: output_scale > input_scale * filter_scale.
+     *
+     * Available since API level 27.
      */
     CONV_2D = 3,
 
@@ -307,7 +317,7 @@
      *         sum_{di, dj} (
      *             input[b, strides[1] * i + di, strides[2] * j + dj, k] *
      *             filter[1, di, dj, k * channel_multiplier + q]
-     *         )
+     *         ) + bias[k * channel_multiplier + q]
      *
      * Supported tensor {@link OperandType}:
      * * {@link OperandType::TENSOR_FLOAT32}
@@ -375,6 +385,8 @@
      *      [batches, out_height, out_width, depth_out]. For output tensor of
      *      {@link OperandType::TENSOR_QUANT8_ASYMM}, the following condition
      *      must be satisfied: output_scale > input_scale * filter_scale.
+     *
+     * Available since API level 27.
      */
     DEPTHWISE_CONV_2D = 4,
 
@@ -409,6 +421,8 @@
      * Outputs:
      * * 0: The output 4-D tensor, of shape [batch, height*block_size,
      *      width*block_size, depth/(block_size*block_size)].
+     *
+     * Available since API level 27.
      */
     DEPTH_TO_SPACE = 5,
 
@@ -430,6 +444,8 @@
      * Outputs:
      * * 0: The output tensor of same shape as input0, but with
      *      {@link OperandType::TENSOR_FLOAT32}.
+     *
+     * Available since API level 27.
      */
     DEQUANTIZE = 6,
 
@@ -463,6 +479,8 @@
      * * 0: A n-D tensor with the same rank and shape as the Values
      *      tensor, except for the first dimension which has the same size
      *      as Lookups' only dimension.
+     *
+     * Available since API level 27.
      */
     EMBEDDING_LOOKUP = 7,
 
@@ -480,6 +498,8 @@
      * Outputs:
      * * 0: The output tensor, of the same {@link OperandType} and dimensions as
      *      the input tensor.
+     *
+     * Available since API level 27.
      */
     FLOOR = 8,
 
@@ -523,6 +543,8 @@
      *      tensor of {@link OperandType::TENSOR_QUANT8_ASYMM}, the following
      *      condition must be satisfied:
      *      output_scale > input_scale * filter_scale.
+     *
+     * Available since API level 27.
      */
     FULLY_CONNECTED = 9,
 
@@ -571,6 +593,8 @@
      *      Stored as {@link OperandType::TENSOR_QUANT8_ASYMM} with offset 0
      *      and scale 1.0f.
      *      A non-zero byte represents True, a hit. A zero indicates otherwise.
+     *
+     * Available since API level 27.
      */
     HASHTABLE_LOOKUP = 10,
 
@@ -596,8 +620,10 @@
      * * 0: A 4-D tensor, of shape [batches, height, width, depth].
      *
      * Outputs:
-     * * 0: The output 4-D tensor, of shape
-     *      [batches, out_height, out_width, depth].
+     * * 0: The output 4-D tensor, of the same shape as input
+     *      [batches, height, width, depth].
+     *
+     * Available since API level 27.
      */
     L2_NORMALIZATION = 11,
 
@@ -609,8 +635,8 @@
      *
      * The values in the output tensor are computed as:
      *
-     *     output[batch, row, col, channel] =
-     *         sqrt(sum_{i, j} pow(input[batch, row + i, col + j, channel], 2) /
+     *     output[b, i, j, c] =
+     *         sqrt(sum_{di, dj} pow(input[b, strides[1] * i + di, strides[2] * j + dj, c], 2) /
      *              sum(1))
      *
      * Supported tensor {@link OperandType}:
@@ -664,6 +690,8 @@
      * Outputs:
      * * 0: The output 4-D tensor, of shape
      *      [batches, out_height, out_width, depth].
+     *
+     * Available since API level 27.
      */
     L2_POOL_2D = 12,
 
@@ -700,6 +728,8 @@
      *
      * Outputs:
      * * 0: The output tensor of same shape as input0.
+     *
+     * Available since API level 27.
      */
     LOCAL_RESPONSE_NORMALIZATION = 13,
 
@@ -723,6 +753,8 @@
      * * 0: The output tensor of same shape as input0.
      *      For {@link OperandType::TENSOR_QUANT8_ASYMM},
      *      the scale must be 1.f / 256 and the zeroPoint must be 0.
+     *
+     * Available since API level 27.
      */
     LOGISTIC = 14,
 
@@ -758,6 +790,8 @@
      *      If the projection type is Dense:
      *        Output.Dim == { Tensor[0].Dim[0] * Tensor[0].Dim[1] }
      *        A flattened tensor that represents projected bit vectors.
+     *
+     * Available since API level 27.
      */
     LSH_PROJECTION = 15,
 
@@ -952,6 +986,8 @@
      *      A 2-D tensor of {@link OperandType::TENSOR_FLOAT32}, of shape
      *      [batch_size, output_size]. This is effectively the same as the
      *      current “output state (out)” value.
+     *
+     * Available since API level 27.
      */
     LSTM = 16,
 
@@ -963,8 +999,10 @@
      *
      * The values in the output tensor are computed as:
      *
-     *     output[batch, row, col, channel] =
-     *         max_{i, j} (input[batch, row + i, col + j, channel])
+     *     output[b, i, j, channel] =
+     *         max_{di, dj} (
+     *             input[b, strides[1] * i + di, strides[2] * j + dj, channel]
+     *         )
      *
      * Supported tensor {@link OperandType}:
      * * {@link OperandType::TENSOR_FLOAT32}
@@ -1018,6 +1056,8 @@
      * Outputs:
      * * 0: The output 4-D tensor, of shape
      *      [batches, out_height, out_width, depth].
+     *
+     * Available since API level 27.
      */
     MAX_POOL_2D = 17,
 
@@ -1055,6 +1095,8 @@
      *      For output tensor of {@link OperandType::TENSOR_QUANT8_ASYMM},
      *      the following condition must be satisfied:
      *      output_scale > input1_scale * input2_scale.
+     *
+     * Available since API level 27.
      */
     MUL = 18,
 
@@ -1076,6 +1118,8 @@
      *
      * Outputs:
      * * 0: The output tensor of same shape as input0.
+     *
+     * Available since API level 27.
      */
     RELU = 19,
 
@@ -1097,6 +1141,8 @@
      *
      * Outputs:
      * * 0: The output tensor of same shape as input0.
+     *
+     * Available since API level 27.
      */
     RELU1 = 20,
 
@@ -1118,6 +1164,8 @@
      *
      * Outputs:
      * * 0: The output tensor of same shape as input0.
+     *
+     * Available since API level 27.
      */
     RELU6 = 21,
 
@@ -1141,6 +1189,8 @@
      *
      * Outputs:
      * * 0: The output tensor, of shape specified by the input shape.
+     *
+     * Available since API level 27.
      */
     RESHAPE = 22,
 
@@ -1167,6 +1217,8 @@
      * Outputs:
      * * 0: The output 4-D tensor, of shape
      *      [batches, new_height, new_width, depth].
+     *
+     * Available since API level 27.
      */
     RESIZE_BILINEAR = 23,
 
@@ -1222,6 +1274,8 @@
      *      A 2-D tensor of {@link OperandType::TENSOR_FLOAT32}, of shape
      *      [batch_size, num_units]. This is effectively the same as the
      *      current state value.
+     *
+     * Available since API level 27.
      */
     RNN = 24,
 
@@ -1251,6 +1305,8 @@
      * * 0: The output tensor of same shape as input0.
      *      For {@link OperandType::TENSOR_QUANT8_ASYMM},
      *      the scale must be 1.f / 256 and the zeroPoint must be 0.
+     *
+     * Available since API level 27.
      */
     SOFTMAX = 25,
 
@@ -1282,8 +1338,10 @@
      *      input height and width.
      *
      * Outputs:
-     * * 0: The output 4-D tensor, of shape [batch, height/block_size,
-     *      width/block_size, depth*block_size*block_size].
+     * * 0: The output 4-D tensor, of shape [batches, height/block_size,
+     *      width/block_size, depth_in*block_size*block_size].
+     *
+     * Available since API level 27.
      */
     SPACE_TO_DEPTH = 26,
 
@@ -1361,7 +1419,9 @@
      *      [batch_size, (memory_size - 1) * num_units * rank].
      * * 1: output.
      *      A 2-D tensor of {@link OperandType::TENSOR_FLOAT32}, of shape
-         *      [batch_size, num_units].
+     *      [batch_size, num_units].
+     *
+     * Available since API level 27.
      */
     SVDF = 27,
 
@@ -1382,6 +1442,8 @@
      *
      * Outputs:
      * * 0: The output tensor of same shape as input0.
+     *
+     * Available since API level 27.
      */
     TANH = 28,
 
@@ -1410,28 +1472,36 @@
 enum OperandLifeTime : int32_t {
     /**
      * The operand is internal to the model. It's created by an operation and
-     * consumed by other operations.
+     * consumed by other operations. It must be an output operand of
+     * exactly one operation.
      */
     TEMPORARY_VARIABLE,
 
     /**
-     * The operand is an input of the model. An operand can't be both
-     * input and output of a model.
+     * The operand is an input of the model. It must not be an output
+     * operand of any operation.
+     *
+     * An operand can't be both input and output of a model.
      */
     MODEL_INPUT,
 
     /**
-     * The operand is an output of the model.
+     * The operand is an output of the model. It must be an output
+     * operand of exactly one operation.
+     *
+     * An operand can't be both input and output of a model.
      */
     MODEL_OUTPUT,
 
     /**
-     * The operand is a constant found in Model.operandValues.
+     * The operand is a constant found in Model.operandValues. It must
+     * not be an output operand of any operation.
      */
     CONSTANT_COPY,
 
     /**
-     * The operand is a constant that was specified via a Memory object.
+     * The operand is a constant that was specified via a Memory
+     * object. It must not be an output operand of any operation.
      */
     CONSTANT_REFERENCE,
 
@@ -1641,19 +1711,21 @@
     /**
      * All operations included in the model.
      *
-     * The operations are sorted into execution order.
+     * The operations are sorted into execution order. Every operand
+     * with lifetime MODEL_OUTPUT or TEMPORARY_VARIABLE must be
+     * written before it is read.
      */
     vec<Operation> operations;
 
     /**
-     * Input indexes of the model.
+     * Input indexes of the model. There must be at least one.
      *
      * Each value corresponds to the index of the operand in "operands".
      */
     vec<uint32_t> inputIndexes;
 
     /**
-     * Output indexes of the model.
+     * Output indexes of the model. There must be at least one.
      *
      * Each value corresponds to the index of the operand in "operands".
      */
@@ -1668,8 +1740,7 @@
     vec<uint8_t> operandValues;
 
     /**
-     * A collection of shared memory pools containing operand data that were
-     * registered by the model.
+     * A collection of shared memory pools containing operand values.
      *
      * An operand's value must be located here if and only if Operand::lifetime
      * equals OperandLifeTime::CONSTANT_REFERENCE.
@@ -1721,6 +1792,9 @@
  * 1) Provides the input and output data to be used when executing the model.
  * 2) Specifies any updates to the input operand metadata that were left
  *    unspecified at model preparation time.
+ *
+ * An output must not overlap with any other output, with an input, or
+ * with an operand of lifetime CONSTANT_REFERENCE.
  */
 struct Request {
     /**
diff --git a/neuralnetworks/1.0/vts/OWNERS b/neuralnetworks/1.0/vts/OWNERS
index 87e322b..b5a8e1f 100644
--- a/neuralnetworks/1.0/vts/OWNERS
+++ b/neuralnetworks/1.0/vts/OWNERS
@@ -2,9 +2,14 @@
 butlermichael@google.com
 dgross@google.com
 jeanluc@google.com
+levp@google.com
 miaowang@google.com
 mikie@google.com
+mks@google.com
 pszczepaniak@google.com
+slavash@google.com
+vddang@google.com
+xusongw@google.com
 
 # VTS team
 yim@google.com
diff --git a/neuralnetworks/1.0/vts/functional/Android.bp b/neuralnetworks/1.0/vts/functional/Android.bp
index e28113b..dd6f934 100644
--- a/neuralnetworks/1.0/vts/functional/Android.bp
+++ b/neuralnetworks/1.0/vts/functional/Android.bp
@@ -25,8 +25,10 @@
     static_libs: [
         "android.hardware.neuralnetworks@1.0",
         "android.hardware.neuralnetworks@1.1",
+        "android.hardware.neuralnetworks@1.2",
         "android.hidl.allocator@1.0",
         "android.hidl.memory@1.0",
+        "libgmock",
         "libhidlmemory",
         "libneuralnetworks_utils",
     ],
@@ -37,22 +39,21 @@
     ],
 }
 
-cc_test {
-    name: "VtsHalNeuralnetworksV1_0TargetTest",
+cc_defaults {
+    name: "VtsHalNeuralNetworksTargetTestDefaults",
+    defaults: ["VtsHalTargetTestDefaults"],
     srcs: [
-        "BasicTests.cpp",
-        "GeneratedTests.cpp",
         "ValidateModel.cpp",
         "ValidateRequest.cpp",
-        "ValidationTests.cpp",
         "VtsHalNeuralnetworks.cpp",
     ],
-    defaults: ["VtsHalTargetTestDefaults"],
     static_libs: [
-        "android.hardware.neuralnetworks@1.1",
         "android.hardware.neuralnetworks@1.0",
+        "android.hardware.neuralnetworks@1.1",
+        "android.hardware.neuralnetworks@1.2",
         "android.hidl.allocator@1.0",
         "android.hidl.memory@1.0",
+        "libgmock",
         "libhidlmemory",
         "libneuralnetworks_utils",
         "VtsHalNeuralnetworksTest_utils",
@@ -62,4 +63,23 @@
         "libneuralnetworks_generated_test_harness_headers",
         "libneuralnetworks_generated_tests",
     ],
+    // Bug: http://b/74200014 - Disable arm32 asan since it triggers internal
+    // error in ld.gold.
+    arch: {
+        arm: {
+            sanitize: {
+                never: true,
+            },
+        },
+    },
+}
+
+cc_test {
+    name: "VtsHalNeuralnetworksV1_0TargetTest",
+    defaults: ["VtsHalNeuralNetworksTargetTestDefaults"],
+    srcs: [
+        "BasicTests.cpp",
+        "GeneratedTests.cpp",
+    ],
+    test_suites: ["general-tests"],
 }
diff --git a/neuralnetworks/1.0/vts/functional/Callbacks.cpp b/neuralnetworks/1.0/vts/functional/Callbacks.cpp
index 46bf243..a1c5a1a 100644
--- a/neuralnetworks/1.0/vts/functional/Callbacks.cpp
+++ b/neuralnetworks/1.0/vts/functional/Callbacks.cpp
@@ -1,10 +1,26 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
 #include "Callbacks.h"
 #include <android-base/logging.h>
 
 namespace android {
 namespace hardware {
 namespace neuralnetworks {
-namespace V1_0 {
+namespace V1_2 {
 namespace implementation {
 
 CallbackBase::CallbackBase() : mNotified(false) {}
@@ -88,7 +104,15 @@
 PreparedModelCallback::~PreparedModelCallback() {}
 
 Return<void> PreparedModelCallback::notify(ErrorStatus errorStatus,
-                                           const sp<IPreparedModel>& preparedModel) {
+                                           const sp<V1_0::IPreparedModel>& preparedModel) {
+    mErrorStatus = errorStatus;
+    mPreparedModel = preparedModel;
+    CallbackBase::notify();
+    return Void();
+}
+
+Return<void> PreparedModelCallback::notify_1_2(ErrorStatus errorStatus,
+                                               const sp<V1_2::IPreparedModel>& preparedModel) {
     mErrorStatus = errorStatus;
     mPreparedModel = preparedModel;
     CallbackBase::notify();
@@ -100,7 +124,7 @@
     return mErrorStatus;
 }
 
-sp<IPreparedModel> PreparedModelCallback::getPreparedModel() {
+sp<V1_0::IPreparedModel> PreparedModelCallback::getPreparedModel() {
     wait();
     return mPreparedModel;
 }
@@ -115,13 +139,19 @@
     return Void();
 }
 
+Return<void> ExecutionCallback::notify_1_2(ErrorStatus errorStatus) {
+    mErrorStatus = errorStatus;
+    CallbackBase::notify();
+    return Void();
+}
+
 ErrorStatus ExecutionCallback::getStatus() {
     wait();
     return mErrorStatus;
 }
 
 }  // namespace implementation
-}  // namespace V1_0
+}  // namespace V1_2
 }  // namespace neuralnetworks
 }  // namespace hardware
 }  // namespace android
diff --git a/neuralnetworks/1.0/vts/functional/Callbacks.h b/neuralnetworks/1.0/vts/functional/Callbacks.h
index 570a4fb..e89980d 100644
--- a/neuralnetworks/1.0/vts/functional/Callbacks.h
+++ b/neuralnetworks/1.0/vts/functional/Callbacks.h
@@ -1,22 +1,42 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
 #ifndef ANDROID_HARDWARE_NEURALNETWORKS_V1_0_CALLBACKS_H
 #define ANDROID_HARDWARE_NEURALNETWORKS_V1_0_CALLBACKS_H
 
 #include <android/hardware/neuralnetworks/1.0/IExecutionCallback.h>
 #include <android/hardware/neuralnetworks/1.0/IPreparedModelCallback.h>
+#include <android/hardware/neuralnetworks/1.2/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.2/IPreparedModelCallback.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
 #include <chrono>
 #include <condition_variable>
 #include <functional>
-#include <hidl/MQDescriptor.h>
-#include <hidl/Status.h>
 #include <mutex>
 #include <thread>
 
 namespace android {
 namespace hardware {
 namespace neuralnetworks {
-namespace V1_0 {
+namespace V1_2 {
 namespace implementation {
 
+using V1_0::ErrorStatus;
+
 /**
  * The CallbackBase class is used internally by the NeuralNetworks runtime to
  * synchronize between different threads. An asynchronous task is launched
@@ -156,11 +176,11 @@
  * asynchronously with respect to the runtime. If a calling thread calls wait*
  * or get* on a PreparedModelCallback object and the corresponding asynchronous
  * task has not finished preparing the model, the calling thread will block
- * until the asynchronous task has called notify. For more information on the
- * synchronization behavior, refer to the CallbackBase class.
+ * until the asynchronous task has either called notify or notify_1_2. For more
+ * information on the synchronization behavior, refer to the CallbackBase class.
  *
  * This class inherits the basic blocking and signaling calls from
- * CallbackBase, and implements the HIDL notify call from
+ * CallbackBase, and implements the HIDL notify and notify_1_2 calls from
  * IPreparedModelCallback. This callback object is passed as an argument to
  * IDevice::prepareModel.
  */
@@ -170,15 +190,15 @@
     ~PreparedModelCallback() override;
 
     /**
-     * IPreparedModelCallback::notify marks the callback object with the return
-     * status of the asynchronous model preparation along with the prepared
-     * model, and calls CallbackBase::notify, enabling all prior and future
-     * wait* calls on the PreparedModelCallback object to proceed. For more
-     * information on the synchronization behavior, refer to the CallbackBase
-     * class.
+     * IPreparedModelCallback::notify and IPreparedModelCallback::notify_1_2
+     * mark the callback object with the return status of the asynchronous
+     * model preparation along with the prepared model, and call
+     * CallbackBase::notify, enabling all prior and future wait* calls on the
+     * PreparedModelCallback object to proceed. For more information on the
+     * synchronization behavior, refer to the CallbackBase class.
      *
-     * IPreparedModelCallback::notify must be called exactly once on a given
-     * PreparedModelCallback object.
+     * Either IPreparedModelCallback::notify or IPreparedModelCallback::notify_1_2
+     * must be called exactly once on a given PreparedModelCallback object.
      *
      * @param status Error status returned from asynchronously preparing the
      *               model; will be:
@@ -189,7 +209,9 @@
      * @param preparedModel Returned model that has been prepared for execution,
      *                      nullptr if the model was unable to be prepared.
      */
-    Return<void> notify(ErrorStatus status, const sp<IPreparedModel>& preparedModel) override;
+    Return<void> notify(ErrorStatus status, const sp<V1_0::IPreparedModel>& preparedModel) override;
+    Return<void> notify_1_2(ErrorStatus status,
+                            const sp<V1_2::IPreparedModel>& preparedModel) override;
 
     /**
      * Retrieves the error status returned from the asynchronous task launched
@@ -217,11 +239,11 @@
      *                       execution, nullptr if the model was unable to be
      *                       prepared.
      */
-    sp<IPreparedModel> getPreparedModel();
+    sp<V1_0::IPreparedModel> getPreparedModel();
 
- private:
+   private:
     ErrorStatus        mErrorStatus;
-    sp<IPreparedModel> mPreparedModel;
+    sp<V1_0::IPreparedModel> mPreparedModel;
 };
 
 /**
@@ -229,12 +251,12 @@
  * execution from a task executing asynchronously with respect to the runtime.
  * If a calling thread calls wait* or get* on a PreparedModelCallback object and
  * the corresponding asynchronous task has not finished the execution, the
- * calling thread will block until the asynchronous task has called notify. For
- * more information on the synchronization behavior, refer to the CallbackBase
- * class.
+ * calling thread will block until the asynchronous task has either called notify
+ * or notify_1_2. For more information on the synchronization behavior, refer to
+ * the CallbackBase class.
  *
  * This class inherits the basic blocking and signaling calls from
- * CallbackBase, and implements the HIDL notify call from
+ * CallbackBase, and implements the HIDL notify and notify_1_2 calls from
  * IExecutionCallback. This callback object is passed as an argument to
  * IPreparedModel::execute.
  */
@@ -244,14 +266,14 @@
     ~ExecutionCallback() override;
 
     /**
-     * IExecutionCallback::notify marks the callback object with the return
-     * status of the asynchronous execution that held this callback and enables
-     * all prior and future wait* calls on the ExecutionCallback object to
-     * proceed. For more information on the synchronization behavior, refer to
-     * the CallbackBase class.
+     * IExecutionCallback::notify and IExecutionCallback::notify_1_2 mark the
+     * callback object with the return status of the asynchronous execution that
+     * held this callback and enable all prior and future wait* calls on the
+     * ExecutionCallback object to proceed. For more information on the
+     * synchronization behavior, refer to the CallbackBase class.
      *
-     * IExecutionCallback::notify must be called exactly once on a given
-     * ExecutionCallback object.
+     * Either IExecutionCallback::notify or IExecutionCallback::notify_1_2 must
+     * be called exactly once on a given ExecutionCallback object.
      *
      * @param status Error status returned from asynchronously preparing the
      *               model; will be:
@@ -263,6 +285,7 @@
      *               - INVALID_ARGUMENT if the input request is invalid
      */
     Return<void> notify(ErrorStatus status) override;
+    Return<void> notify_1_2(ErrorStatus status) override;
 
     /**
      * Retrieves the error status returned from the asynchronous task launched
@@ -299,7 +322,7 @@
 }
 
 }  // namespace implementation
-}  // namespace V1_0
+}  // namespace V1_2
 }  // namespace neuralnetworks
 }  // namespace hardware
 }  // namespace android
diff --git a/neuralnetworks/1.0/vts/functional/GeneratedTestHarness.cpp b/neuralnetworks/1.0/vts/functional/GeneratedTestHarness.cpp
index 64495cf..7c5b0bc 100644
--- a/neuralnetworks/1.0/vts/functional/GeneratedTestHarness.cpp
+++ b/neuralnetworks/1.0/vts/functional/GeneratedTestHarness.cpp
@@ -24,6 +24,11 @@
 #include <android/hardware/neuralnetworks/1.0/IPreparedModel.h>
 #include <android/hardware/neuralnetworks/1.0/IPreparedModelCallback.h>
 #include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/IDevice.h>
+#include <android/hardware/neuralnetworks/1.2/IDevice.h>
+#include <android/hardware/neuralnetworks/1.2/IExecutionCallback.h>
+#include <android/hardware/neuralnetworks/1.2/IPreparedModel.h>
+#include <android/hardware/neuralnetworks/1.2/IPreparedModelCallback.h>
 #include <android/hidl/allocator/1.0/IAllocator.h>
 #include <android/hidl/memory/1.0/IMemory.h>
 #include <hidlmemory/mapping.h>
@@ -34,18 +39,21 @@
 namespace neuralnetworks {
 
 namespace generated_tests {
-using ::android::hardware::neuralnetworks::V1_0::implementation::ExecutionCallback;
-using ::android::hardware::neuralnetworks::V1_0::implementation::PreparedModelCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
+using ::test_helper::bool8;
+using ::test_helper::compare;
+using ::test_helper::expectMultinomialDistributionWithinTolerance;
 using ::test_helper::filter;
+using ::test_helper::Float32Operands;
 using ::test_helper::for_all;
 using ::test_helper::for_each;
-using ::test_helper::resize_accordingly;
-using ::test_helper::MixedTyped;
-using ::test_helper::MixedTypedExampleType;
-using ::test_helper::Float32Operands;
 using ::test_helper::Int32Operands;
+using ::test_helper::MixedTyped;
+using ::test_helper::MixedTypedExample;
+using ::test_helper::MixedTypedIndex;
 using ::test_helper::Quant8Operands;
-using ::test_helper::compare;
+using ::test_helper::resize_accordingly;
 
 template <typename T>
 void copy_back_(MixedTyped* dst, const std::vector<RequestArgument>& ra, char* src) {
@@ -61,26 +69,61 @@
     copy_back_<float>(dst, ra, src);
     copy_back_<int32_t>(dst, ra, src);
     copy_back_<uint8_t>(dst, ra, src);
+    copy_back_<int16_t>(dst, ra, src);
+    copy_back_<_Float16>(dst, ra, src);
+    copy_back_<bool8>(dst, ra, src);
+    static_assert(6 == std::tuple_size<MixedTyped>::value,
+                  "Number of types in MixedTyped changed, but copy_back function wasn't updated");
 }
 
 // Top level driver for models and examples generated by test_generator.py
 // Test driver for those generated from ml/nn/runtime/test/spec
-void EvaluatePreparedModel(sp<IPreparedModel>& preparedModel, std::function<bool(int)> is_ignored,
-                           const std::vector<MixedTypedExampleType>& examples, float fpAtol = 1e-5f,
-                           float fpRtol = 1e-5f) {
+static Return<ErrorStatus> ExecutePreparedModel(sp<V1_0::IPreparedModel>& preparedModel,
+                                                const Request& request,
+                                                sp<ExecutionCallback>& callback) {
+    return preparedModel->execute(request, callback);
+}
+static Return<ErrorStatus> ExecutePreparedModel(sp<V1_2::IPreparedModel>& preparedModel,
+                                                const Request& request,
+                                                sp<ExecutionCallback>& callback) {
+    return preparedModel->execute_1_2(request, callback);
+}
+static Return<ErrorStatus> ExecutePreparedModel(sp<V1_0::IPreparedModel>&, const Request&) {
+    ADD_FAILURE() << "asking for synchronous execution at V1_0";
+    return ErrorStatus::GENERAL_FAILURE;
+}
+static Return<ErrorStatus> ExecutePreparedModel(sp<V1_2::IPreparedModel>& preparedModel,
+                                                const Request& request) {
+    return preparedModel->executeSynchronously(request);
+}
+enum class Synchronously { NO, YES };
+const float kDefaultAtol = 1e-5f;
+const float kDefaultRtol = 1e-5f;
+template <typename T_IPreparedModel>
+void EvaluatePreparedModel(sp<T_IPreparedModel>& preparedModel, std::function<bool(int)> is_ignored,
+                           const std::vector<MixedTypedExample>& examples,
+                           bool hasRelaxedFloat32Model = false, float fpAtol = kDefaultAtol,
+                           float fpRtol = kDefaultRtol, Synchronously sync = Synchronously::NO) {
     const uint32_t INPUT = 0;
     const uint32_t OUTPUT = 1;
 
     int example_no = 1;
     for (auto& example : examples) {
         SCOPED_TRACE(example_no++);
+        const MixedTyped& inputs = example.operands.first;
+        const MixedTyped& golden = example.operands.second;
 
-        const MixedTyped& inputs = example.first;
-        const MixedTyped& golden = example.second;
+        const bool hasFloat16Inputs = !std::get<MixedTypedIndex<_Float16>::index>(inputs).empty();
+        if (hasRelaxedFloat32Model || hasFloat16Inputs) {
+            // TODO: Adjust the error limit based on testing.
+            // If in relaxed mode, set the absolute tolerance to be 5ULP of FP16.
+            fpAtol = 5.0f * 0.0009765625f;
+            // Set the relative tolerance to be 5ULP of the corresponding FP precision.
+            fpRtol = 5.0f * 0.0009765625f;
+        }
 
         std::vector<RequestArgument> inputs_info, outputs_info;
         uint32_t inputSize = 0, outputSize = 0;
-
         // This function only partially specifies the metadata (vector of RequestArguments).
         // The contents are copied over below.
         for_all(inputs, [&inputs_info, &inputSize](int index, auto, auto s) {
@@ -153,18 +196,31 @@
         inputMemory->commit();
         outputMemory->commit();
 
-        // launch execution
-        sp<ExecutionCallback> executionCallback = new ExecutionCallback();
-        ASSERT_NE(nullptr, executionCallback.get());
-        Return<ErrorStatus> executionLaunchStatus = preparedModel->execute(
-            {.inputs = inputs_info, .outputs = outputs_info, .pools = pools}, executionCallback);
-        ASSERT_TRUE(executionLaunchStatus.isOk());
-        EXPECT_EQ(ErrorStatus::NONE, static_cast<ErrorStatus>(executionLaunchStatus));
+        if (sync == Synchronously::NO) {
+            SCOPED_TRACE("asynchronous");
 
-        // retrieve execution status
-        executionCallback->wait();
-        ErrorStatus executionReturnStatus = executionCallback->getStatus();
-        EXPECT_EQ(ErrorStatus::NONE, executionReturnStatus);
+            // launch execution
+            sp<ExecutionCallback> executionCallback = new ExecutionCallback();
+            ASSERT_NE(nullptr, executionCallback.get());
+            Return<ErrorStatus> executionLaunchStatus = ExecutePreparedModel(
+                preparedModel, {.inputs = inputs_info, .outputs = outputs_info, .pools = pools},
+                executionCallback);
+            ASSERT_TRUE(executionLaunchStatus.isOk());
+            EXPECT_EQ(ErrorStatus::NONE, static_cast<ErrorStatus>(executionLaunchStatus));
+
+            // retrieve execution status
+            executionCallback->wait();
+            ErrorStatus executionReturnStatus = executionCallback->getStatus();
+            EXPECT_EQ(ErrorStatus::NONE, executionReturnStatus);
+        } else {
+            SCOPED_TRACE("synchronous");
+
+            // execute
+            Return<ErrorStatus> executionStatus = ExecutePreparedModel(
+                preparedModel, {.inputs = inputs_info, .outputs = outputs_info, .pools = pools});
+            ASSERT_TRUE(executionStatus.isOk());
+            EXPECT_EQ(ErrorStatus::NONE, static_cast<ErrorStatus>(executionStatus));
+        }
 
         // validate results
         outputMemory->read();
@@ -176,12 +232,32 @@
 
         // We want "close-enough" results for float
         compare(filtered_golden, filtered_test, fpAtol, fpRtol);
+
+        if (example.expectedMultinomialDistributionTolerance > 0) {
+            expectMultinomialDistributionWithinTolerance(test, example);
+        }
     }
 }
+template <typename T_IPreparedModel>
+void EvaluatePreparedModel(sp<T_IPreparedModel>& preparedModel, std::function<bool(int)> is_ignored,
+                           const std::vector<MixedTypedExample>& examples,
+                           bool hasRelaxedFloat32Model, Synchronously sync) {
+    EvaluatePreparedModel(preparedModel, is_ignored, examples, hasRelaxedFloat32Model, kDefaultAtol,
+                          kDefaultRtol, sync);
+}
+
+static void getPreparedModel(sp<PreparedModelCallback> callback,
+                             sp<V1_0::IPreparedModel>* preparedModel) {
+    *preparedModel = callback->getPreparedModel();
+}
+static void getPreparedModel(sp<PreparedModelCallback> callback,
+                             sp<V1_2::IPreparedModel>* preparedModel) {
+    sp<V1_0::IPreparedModel> preparedModelV1_0 = callback->getPreparedModel();
+    *preparedModel = V1_2::IPreparedModel::castFrom(preparedModelV1_0).withDefault(nullptr);
+}
 
 void Execute(const sp<V1_0::IDevice>& device, std::function<V1_0::Model(void)> create_model,
-             std::function<bool(int)> is_ignored,
-             const std::vector<MixedTypedExampleType>& examples) {
+             std::function<bool(int)> is_ignored, const std::vector<MixedTypedExample>& examples) {
     V1_0::Model model = create_model();
 
     // see if service can handle model
@@ -205,7 +281,8 @@
     // retrieve prepared model
     preparedModelCallback->wait();
     ErrorStatus prepareReturnStatus = preparedModelCallback->getStatus();
-    sp<IPreparedModel> preparedModel = preparedModelCallback->getPreparedModel();
+    sp<V1_0::IPreparedModel> preparedModel;
+    getPreparedModel(preparedModelCallback, &preparedModel);
 
     // early termination if vendor service cannot fully prepare model
     if (!fullySupportsModel && prepareReturnStatus != ErrorStatus::NONE) {
@@ -221,12 +298,12 @@
     ASSERT_NE(nullptr, preparedModel.get());
 
     float fpAtol = 1e-5f, fpRtol = 5.0f * 1.1920928955078125e-7f;
-    EvaluatePreparedModel(preparedModel, is_ignored, examples, fpAtol, fpRtol);
+    EvaluatePreparedModel(preparedModel, is_ignored, examples,
+                          /*hasRelaxedFloat32Model=*/false, fpAtol, fpRtol);
 }
 
 void Execute(const sp<V1_1::IDevice>& device, std::function<V1_1::Model(void)> create_model,
-             std::function<bool(int)> is_ignored,
-             const std::vector<MixedTypedExampleType>& examples) {
+             std::function<bool(int)> is_ignored, const std::vector<MixedTypedExample>& examples) {
     V1_1::Model model = create_model();
 
     // see if service can handle model
@@ -251,7 +328,8 @@
     // retrieve prepared model
     preparedModelCallback->wait();
     ErrorStatus prepareReturnStatus = preparedModelCallback->getStatus();
-    sp<IPreparedModel> preparedModel = preparedModelCallback->getPreparedModel();
+    sp<V1_0::IPreparedModel> preparedModel;
+    getPreparedModel(preparedModelCallback, &preparedModel);
 
     // early termination if vendor service cannot fully prepare model
     if (!fullySupportsModel && prepareReturnStatus != ErrorStatus::NONE) {
@@ -266,13 +344,57 @@
     EXPECT_EQ(ErrorStatus::NONE, prepareReturnStatus);
     ASSERT_NE(nullptr, preparedModel.get());
 
-    // TODO: Adjust the error limit based on testing.
-    // If in relaxed mode, set the absolute tolerance to be 5ULP of FP16.
-    float fpAtol = !model.relaxComputationFloat32toFloat16 ? 1e-5f : 5.0f * 0.0009765625f;
-    // Set the relative tolerance to be 5ULP of the corresponding FP precision.
-    float fpRtol = !model.relaxComputationFloat32toFloat16 ? 5.0f * 1.1920928955078125e-7f
-                                                           : 5.0f * 0.0009765625f;
-    EvaluatePreparedModel(preparedModel, is_ignored, examples, fpAtol, fpRtol);
+    EvaluatePreparedModel(preparedModel, is_ignored, examples,
+                          model.relaxComputationFloat32toFloat16);
+}
+
+// TODO: Reduce code duplication.
+void Execute(const sp<V1_2::IDevice>& device, std::function<V1_2::Model(void)> create_model,
+             std::function<bool(int)> is_ignored, const std::vector<MixedTypedExample>& examples) {
+    V1_2::Model model = create_model();
+
+    // see if service can handle model
+    bool fullySupportsModel = false;
+    Return<void> supportedCall = device->getSupportedOperations_1_2(
+        model, [&fullySupportsModel](ErrorStatus status, const hidl_vec<bool>& supported) {
+            ASSERT_EQ(ErrorStatus::NONE, status);
+            ASSERT_NE(0ul, supported.size());
+            fullySupportsModel =
+                std::all_of(supported.begin(), supported.end(), [](bool valid) { return valid; });
+        });
+    ASSERT_TRUE(supportedCall.isOk());
+
+    // launch prepare model
+    sp<PreparedModelCallback> preparedModelCallback = new PreparedModelCallback();
+    ASSERT_NE(nullptr, preparedModelCallback.get());
+    Return<ErrorStatus> prepareLaunchStatus = device->prepareModel_1_2(
+        model, ExecutionPreference::FAST_SINGLE_ANSWER, preparedModelCallback);
+    ASSERT_TRUE(prepareLaunchStatus.isOk());
+    ASSERT_EQ(ErrorStatus::NONE, static_cast<ErrorStatus>(prepareLaunchStatus));
+
+    // retrieve prepared model
+    preparedModelCallback->wait();
+    ErrorStatus prepareReturnStatus = preparedModelCallback->getStatus();
+    sp<V1_2::IPreparedModel> preparedModel;
+    getPreparedModel(preparedModelCallback, &preparedModel);
+
+    // early termination if vendor service cannot fully prepare model
+    if (!fullySupportsModel && prepareReturnStatus != ErrorStatus::NONE) {
+        ASSERT_EQ(nullptr, preparedModel.get());
+        LOG(INFO) << "NN VTS: Early termination of test because vendor service cannot "
+                     "prepare model that it does not support.";
+        std::cout << "[          ]   Early termination of test because vendor service cannot "
+                     "prepare model that it does not support."
+                  << std::endl;
+        return;
+    }
+    EXPECT_EQ(ErrorStatus::NONE, prepareReturnStatus);
+    ASSERT_NE(nullptr, preparedModel.get());
+
+    EvaluatePreparedModel(preparedModel, is_ignored, examples,
+                          model.relaxComputationFloat32toFloat16, Synchronously::NO);
+    EvaluatePreparedModel(preparedModel, is_ignored, examples,
+                          model.relaxComputationFloat32toFloat16, Synchronously::YES);
 }
 
 }  // namespace generated_tests
diff --git a/neuralnetworks/1.0/vts/functional/GeneratedTests.cpp b/neuralnetworks/1.0/vts/functional/GeneratedTests.cpp
index d84479c..55e5861 100644
--- a/neuralnetworks/1.0/vts/functional/GeneratedTests.cpp
+++ b/neuralnetworks/1.0/vts/functional/GeneratedTests.cpp
@@ -31,21 +31,21 @@
 namespace neuralnetworks {
 
 namespace generated_tests {
-using ::test_helper::MixedTypedExampleType;
+using ::test_helper::MixedTypedExample;
 extern void Execute(const sp<V1_0::IDevice>&, std::function<V1_0::Model(void)>,
-                    std::function<bool(int)>, const std::vector<MixedTypedExampleType>&);
+                    std::function<bool(int)>, const std::vector<MixedTypedExample>&);
 }  // namespace generated_tests
 
 namespace V1_0 {
 namespace vts {
 namespace functional {
 
-using ::android::hardware::neuralnetworks::V1_0::implementation::ExecutionCallback;
-using ::android::hardware::neuralnetworks::V1_0::implementation::PreparedModelCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
 using ::android::nn::allocateSharedMemory;
+using ::test_helper::MixedTypedExample;
 
-// Mixed-typed examples
-typedef test_helper::MixedTypedExampleType MixedTypedExample;
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
 
 // in frameworks/ml/nn/runtime/tests/generated/
 #include "all_generated_V1_0_vts_tests.cpp"
diff --git a/neuralnetworks/1.0/vts/functional/Models.h b/neuralnetworks/1.0/vts/functional/Models.h
deleted file mode 100644
index 751ab32..0000000
--- a/neuralnetworks/1.0/vts/functional/Models.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Copyright (C) 2018 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef VTS_HAL_NEURALNETWORKS_V1_0_VTS_FUNCTIONAL_MODELS_H
-#define VTS_HAL_NEURALNETWORKS_V1_0_VTS_FUNCTIONAL_MODELS_H
-
-#define LOG_TAG "neuralnetworks_hidl_hal_test"
-
-#include "TestHarness.h"
-
-#include <android/hardware/neuralnetworks/1.0/types.h>
-
-namespace android {
-namespace hardware {
-namespace neuralnetworks {
-namespace V1_0 {
-namespace vts {
-namespace functional {
-
-using MixedTypedExample = test_helper::MixedTypedExampleType;
-
-#define FOR_EACH_TEST_MODEL(FN)                          \
-    FN(add_broadcast_quant8)                             \
-    FN(add)                                              \
-    FN(add_quant8)                                       \
-    FN(avg_pool_float_1)                                 \
-    FN(avg_pool_float_2)                                 \
-    FN(avg_pool_float_3)                                 \
-    FN(avg_pool_float_4)                                 \
-    FN(avg_pool_float_5)                                 \
-    FN(avg_pool_quant8_1)                                \
-    FN(avg_pool_quant8_2)                                \
-    FN(avg_pool_quant8_3)                                \
-    FN(avg_pool_quant8_4)                                \
-    FN(avg_pool_quant8_5)                                \
-    FN(concat_float_1)                                   \
-    FN(concat_float_2)                                   \
-    FN(concat_float_3)                                   \
-    FN(concat_quant8_1)                                  \
-    FN(concat_quant8_2)                                  \
-    FN(concat_quant8_3)                                  \
-    FN(conv_1_h3_w2_SAME)                                \
-    FN(conv_1_h3_w2_VALID)                               \
-    FN(conv_3_h3_w2_SAME)                                \
-    FN(conv_3_h3_w2_VALID)                               \
-    FN(conv_float_2)                                     \
-    FN(conv_float_channels)                              \
-    FN(conv_float_channels_weights_as_inputs)            \
-    FN(conv_float_large)                                 \
-    FN(conv_float_large_weights_as_inputs)               \
-    FN(conv_float)                                       \
-    FN(conv_float_weights_as_inputs)                     \
-    FN(conv_quant8_2)                                    \
-    FN(conv_quant8_channels)                             \
-    FN(conv_quant8_channels_weights_as_inputs)           \
-    FN(conv_quant8_large)                                \
-    FN(conv_quant8_large_weights_as_inputs)              \
-    FN(conv_quant8)                                      \
-    FN(conv_quant8_overflow)                             \
-    FN(conv_quant8_overflow_weights_as_inputs)           \
-    FN(conv_quant8_weights_as_inputs)                    \
-    FN(depth_to_space_float_1)                           \
-    FN(depth_to_space_float_2)                           \
-    FN(depth_to_space_float_3)                           \
-    FN(depth_to_space_quant8_1)                          \
-    FN(depth_to_space_quant8_2)                          \
-    FN(depthwise_conv2d_float_2)                         \
-    FN(depthwise_conv2d_float_large_2)                   \
-    FN(depthwise_conv2d_float_large_2_weights_as_inputs) \
-    FN(depthwise_conv2d_float_large)                     \
-    FN(depthwise_conv2d_float_large_weights_as_inputs)   \
-    FN(depthwise_conv2d_float)                           \
-    FN(depthwise_conv2d_float_weights_as_inputs)         \
-    FN(depthwise_conv2d_quant8_2)                        \
-    FN(depthwise_conv2d_quant8_large)                    \
-    FN(depthwise_conv2d_quant8_large_weights_as_inputs)  \
-    FN(depthwise_conv2d_quant8)                          \
-    FN(depthwise_conv2d_quant8_weights_as_inputs)        \
-    FN(depthwise_conv)                                   \
-    FN(dequantize)                                       \
-    FN(embedding_lookup)                                 \
-    FN(floor)                                            \
-    FN(fully_connected_float_2)                          \
-    FN(fully_connected_float_large)                      \
-    FN(fully_connected_float_large_weights_as_inputs)    \
-    FN(fully_connected_float)                            \
-    FN(fully_connected_float_weights_as_inputs)          \
-    FN(fully_connected_quant8_2)                         \
-    FN(fully_connected_quant8_large)                     \
-    FN(fully_connected_quant8_large_weights_as_inputs)   \
-    FN(fully_connected_quant8)                           \
-    FN(fully_connected_quant8_weights_as_inputs)         \
-    FN(hashtable_lookup_float)                           \
-    FN(hashtable_lookup_quant8)                          \
-    FN(l2_normalization_2)                               \
-    FN(l2_normalization_large)                           \
-    FN(l2_normalization)                                 \
-    FN(l2_pool_float_2)                                  \
-    FN(l2_pool_float_large)                              \
-    FN(l2_pool_float)                                    \
-    FN(local_response_norm_float_1)                      \
-    FN(local_response_norm_float_2)                      \
-    FN(local_response_norm_float_3)                      \
-    FN(local_response_norm_float_4)                      \
-    FN(logistic_float_1)                                 \
-    FN(logistic_float_2)                                 \
-    FN(logistic_quant8_1)                                \
-    FN(logistic_quant8_2)                                \
-    FN(lsh_projection_2)                                 \
-    FN(lsh_projection)                                   \
-    FN(lsh_projection_weights_as_inputs)                 \
-    FN(lstm2)                                            \
-    FN(lstm2_state2)                                     \
-    FN(lstm2_state)                                      \
-    FN(lstm3)                                            \
-    FN(lstm3_state2)                                     \
-    FN(lstm3_state3)                                     \
-    FN(lstm3_state)                                      \
-    FN(lstm)                                             \
-    FN(lstm_state2)                                      \
-    FN(lstm_state)                                       \
-    FN(max_pool_float_1)                                 \
-    FN(max_pool_float_2)                                 \
-    FN(max_pool_float_3)                                 \
-    FN(max_pool_float_4)                                 \
-    FN(max_pool_quant8_1)                                \
-    FN(max_pool_quant8_2)                                \
-    FN(max_pool_quant8_3)                                \
-    FN(max_pool_quant8_4)                                \
-    FN(mobilenet_224_gender_basic_fixed)                 \
-    FN(mobilenet_quantized)                              \
-    FN(mul_broadcast_quant8)                             \
-    FN(mul)                                              \
-    FN(mul_quant8)                                       \
-    FN(mul_relu)                                         \
-    FN(relu1_float_1)                                    \
-    FN(relu1_float_2)                                    \
-    FN(relu1_quant8_1)                                   \
-    FN(relu1_quant8_2)                                   \
-    FN(relu6_float_1)                                    \
-    FN(relu6_float_2)                                    \
-    FN(relu6_quant8_1)                                   \
-    FN(relu6_quant8_2)                                   \
-    FN(relu_float_1)                                     \
-    FN(relu_float_2)                                     \
-    FN(relu_quant8_1)                                    \
-    FN(relu_quant8_2)                                    \
-    FN(reshape)                                          \
-    FN(reshape_quant8)                                   \
-    FN(reshape_quant8_weights_as_inputs)                 \
-    FN(reshape_weights_as_inputs)                        \
-    FN(resize_bilinear_2)                                \
-    FN(resize_bilinear)                                  \
-    FN(rnn)                                              \
-    FN(rnn_state)                                        \
-    FN(softmax_float_1)                                  \
-    FN(softmax_float_2)                                  \
-    FN(softmax_quant8_1)                                 \
-    FN(softmax_quant8_2)                                 \
-    FN(space_to_depth_float_1)                           \
-    FN(space_to_depth_float_2)                           \
-    FN(space_to_depth_float_3)                           \
-    FN(space_to_depth_quant8_1)                          \
-    FN(space_to_depth_quant8_2)                          \
-    FN(svdf2)                                            \
-    FN(svdf)                                             \
-    FN(svdf_state)                                       \
-    FN(tanh)
-
-#define FORWARD_DECLARE_GENERATED_OBJECTS(function) \
-    namespace function {                            \
-    extern std::vector<MixedTypedExample> examples; \
-    Model createTestModel();                        \
-    }
-
-FOR_EACH_TEST_MODEL(FORWARD_DECLARE_GENERATED_OBJECTS)
-
-#undef FORWARD_DECLARE_GENERATED_OBJECTS
-
-}  // namespace functional
-}  // namespace vts
-}  // namespace V1_0
-}  // namespace neuralnetworks
-}  // namespace hardware
-}  // namespace android
-
-#endif  // VTS_HAL_NEURALNETWORKS_V1_0_VTS_FUNCTIONAL_MODELS_H
diff --git a/neuralnetworks/1.0/vts/functional/ValidateModel.cpp b/neuralnetworks/1.0/vts/functional/ValidateModel.cpp
index 4f0697e..5d24fb5 100644
--- a/neuralnetworks/1.0/vts/functional/ValidateModel.cpp
+++ b/neuralnetworks/1.0/vts/functional/ValidateModel.cpp
@@ -27,8 +27,8 @@
 namespace vts {
 namespace functional {
 
-using ::android::hardware::neuralnetworks::V1_0::implementation::ExecutionCallback;
-using ::android::hardware::neuralnetworks::V1_0::implementation::PreparedModelCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
 
 ///////////////////////// UTILITY FUNCTIONS /////////////////////////
 
@@ -283,7 +283,7 @@
         if (mutateOperationOperandTypeSkip(operand, model)) {
             continue;
         }
-        for (OperandType invalidOperandType : hidl_enum_iterator<OperandType>{}) {
+        for (OperandType invalidOperandType : hidl_enum_range<OperandType>{}) {
             // Do not test OEM types
             if (invalidOperandType == model.operands[operand].type ||
                 invalidOperandType == OperandType::OEM ||
diff --git a/neuralnetworks/1.0/vts/functional/ValidateRequest.cpp b/neuralnetworks/1.0/vts/functional/ValidateRequest.cpp
index 09c1878..72a5007 100644
--- a/neuralnetworks/1.0/vts/functional/ValidateRequest.cpp
+++ b/neuralnetworks/1.0/vts/functional/ValidateRequest.cpp
@@ -33,12 +33,12 @@
 namespace vts {
 namespace functional {
 
-using ::android::hardware::neuralnetworks::V1_0::implementation::ExecutionCallback;
-using ::android::hardware::neuralnetworks::V1_0::implementation::PreparedModelCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
 using ::android::hidl::memory::V1_0::IMemory;
-using test_helper::MixedTyped;
-using test_helper::MixedTypedExampleType;
 using test_helper::for_all;
+using test_helper::MixedTyped;
+using test_helper::MixedTypedExample;
 
 ///////////////////////// UTILITY FUNCTIONS /////////////////////////
 
@@ -151,15 +151,15 @@
 
 ///////////////////////////// ENTRY POINT //////////////////////////////////
 
-std::vector<Request> createRequests(const std::vector<MixedTypedExampleType>& examples) {
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples) {
     const uint32_t INPUT = 0;
     const uint32_t OUTPUT = 1;
 
     std::vector<Request> requests;
 
-    for (auto& example : examples) {
-        const MixedTyped& inputs = example.first;
-        const MixedTyped& outputs = example.second;
+    for (const MixedTypedExample& example : examples) {
+        const MixedTyped& inputs = example.operands.first;
+        const MixedTyped& outputs = example.operands.second;
 
         std::vector<RequestArgument> inputs_info, outputs_info;
         uint32_t inputSize = 0, outputSize = 0;
diff --git a/neuralnetworks/1.0/vts/functional/ValidationTests.cpp b/neuralnetworks/1.0/vts/functional/ValidationTests.cpp
deleted file mode 100644
index 98fc1c5..0000000
--- a/neuralnetworks/1.0/vts/functional/ValidationTests.cpp
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2018 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "neuralnetworks_hidl_hal_test"
-
-#include "Models.h"
-#include "VtsHalNeuralnetworks.h"
-
-namespace android {
-namespace hardware {
-namespace neuralnetworks {
-namespace V1_0 {
-namespace vts {
-namespace functional {
-
-// forward declarations
-std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
-
-// generate validation tests
-#define VTS_CURRENT_TEST_CASE(TestName)                                           \
-    TEST_F(ValidationTest, TestName) {                                            \
-        const Model model = TestName::createTestModel();                          \
-        const std::vector<Request> requests = createRequests(TestName::examples); \
-        validateModel(model);                                                     \
-        validateRequests(model, requests);                                        \
-    }
-
-FOR_EACH_TEST_MODEL(VTS_CURRENT_TEST_CASE)
-
-#undef VTS_CURRENT_TEST_CASE
-
-}  // namespace functional
-}  // namespace vts
-}  // namespace V1_0
-}  // namespace neuralnetworks
-}  // namespace hardware
-}  // namespace android
diff --git a/neuralnetworks/1.1/types.hal b/neuralnetworks/1.1/types.hal
index e4c656d..c9de76b 100644
--- a/neuralnetworks/1.1/types.hal
+++ b/neuralnetworks/1.1/types.hal
@@ -26,6 +26,7 @@
  * The type of an operation in a model.
  */
 enum OperationType : @1.0::OperationType {
+
     /**
      * BatchToSpace for N-dimensional tensors.
      *
@@ -50,6 +51,8 @@
      *
      * Outputs:
      * * 0: A tensor of the same {@link OperandType} as input0.
+     *
+     * Available since API level 28.
      */
     BATCH_TO_SPACE_ND = 29,
 
@@ -88,6 +91,8 @@
      *
      * Outputs:
      * * 0: A tensor of the same {@link OperandType} as input0.
+     *
+     * Available since API level 28.
      */
     DIV = 30,
 
@@ -118,6 +123,8 @@
      *
      * Outputs:
      * * 0: A tensor of the same {@link OperandType} as input0.
+     *
+     * Available since API level 28.
      */
     MEAN = 31,
 
@@ -137,13 +144,21 @@
      * * 1: A 2-D Tensor of {@link OperandType::TENSOR_INT32}, the paddings
      *      for each spatial dimension of the input tensor. The shape of the
      *      tensor must be {rank(input0), 2}.
-     *      padding[i, 0] specifies the number of element to be padded in the
+     *      padding[i, 0] specifies the number of elements to be padded in the
      *      front of dimension i.
-     *      padding[i, 1] specifies the number of element to be padded after the
+     *      padding[i, 1] specifies the number of elements to be padded after the
      *      end of dimension i.
      *
      * Outputs:
-     * * 0: A tensor of the same {@link OperandType} as input0.
+     * * 0: A tensor of the same {@link OperandType} as input0. The
+     *      output tensor has the same rank as input0, and each
+     *      dimension of the output tensor has the same size as the
+     *      corresponding dimension of the input tensor plus the size
+     *      of the padding:
+     *          output0.dimension[i] =
+     *              padding[i, 0] + input0.dimension[i] + padding[i, 1]
+     *
+     * Available since API level 28.
      */
     PAD = 32,
 
@@ -179,6 +194,8 @@
      *
      * Outputs:
      * * 0: A tensor of the same {@link OperandType} as input0.
+     *
+     * Available since API level 28.
      */
     SPACE_TO_BATCH_ND = 33,
 
@@ -208,6 +225,8 @@
      * * 0: A tensor of the same {@link OperandType} as input0. Contains the
      *      same data as input, but has one or more dimensions of size 1
      *      removed.
+     *
+     * Available since API level 28.
      */
     SQUEEZE = 34,
 
@@ -228,28 +247,32 @@
      *
      * Inputs:
      * * 0: An n-D tensor, specifying the tensor to be sliced.
-     * * 1: A 1-D Tensor of {@link OperandType::TENSOR_INT32}, the starts of
-     *      the dimensions of the input tensor to be sliced. The length must be
-     *      of rank(input0).
-     * * 2: A 1-D Tensor of {@link OperandType::TENSOR_INT32}, the ends of
-     *      the dimensions of the input tensor to be sliced. The length must be
-     *      of rank(input0).
-     * * 3: A 1-D Tensor of {@link OperandType::TENSOR_INT32}, the strides of
-     *      the dimensions of the input tensor to be sliced. The length must be
-     *      of rank(input0).
-     * * 4: An {@link OperandType::INT32} scalar, begin_mask. If the ith bit
+     * * 1: begin, a 1-D tensor of {@link OperandType::TENSOR_INT32}. The
+     *      starts of the dimensions of the input tensor to be sliced. The
+     *      length must be of rank(input0).
+     * * 2: end, a 1-D tensor of {@link OperandType::TENSOR_INT32}. The
+     *      ends of the dimensions of the input tensor to be sliced. The length
+     *      must be of rank(input0).
+     * * 3: strides, a 1-D tensor of {@link OperandType::TENSOR_INT32}. The
+     *      strides of the dimensions of the input tensor to be sliced. The
+     *      length must be of rank(input0). The entries must be non-zero.
+     * * 4: begin_mask, an {@link OperandType::INT32} scalar. If the ith bit
      *      of begin_mask is set, begin[i] is ignored and the fullest possible
      *      range in that dimension is used instead.
-     * * 5: An {@link OperandType::INT32} scalar, end_mask. If the ith bit of
+     * * 5: end_mask, an {@link OperandType::INT32} scalar. If the ith bit of
      *      end_mask is set, end[i] is ignored and the fullest possible range in
      *      that dimension is used instead.
-     * * 6: An {@link OperandType::INT32} scalar, shrink_axis_mask. An int32
-     *      mask. If the ith bit of shrink_axis_mask is set, it implies that the
-     *      ith specification shrinks the dimensionality by 1. A slice of size 1
-     *      starting from begin[i] in the dimension must be preserved.
+     * * 6: shrink_axis_mask, an {@link OperandType::INT32} scalar. If the
+     *      ith bit of shrink_axis_mask is set, the ith dimension specification
+     *      shrinks the dimensionality by 1, taking on the value at index
+     *      begin[i]. In this case, the ith specification must define a
+     *      slice of size 1, e.g. begin[i] = x, end[i] = x + 1.
      *
      * Outputs:
-     * * 0: A tensor of the same {@link OperandType} as input0.
+     * * 0: A tensor of the same {@link OperandType} as input0 and rank (n - k),
+     *      where k is the number of bits set in shrink_axis_mask.
+     *
+     * Available since API level 28.
      */
     STRIDED_SLICE = 35,
 
@@ -288,6 +311,8 @@
      *
      * Outputs:
      * * 0: A tensor of the same {@link OperandType} as input0.
+     *
+     * Available since API level 28.
      */
     SUB = 36,
 
@@ -313,8 +338,11 @@
      *
      * Outputs:
      * * 0: A tensor of the same {@link OperandType} as input0.
+     *
+     * Available since API level 28.
      */
     TRANSPOSE = 37,
+
 };
 
 /**
@@ -377,19 +405,21 @@
     /**
      * All operations included in the model.
      *
-     * The operations are sorted into execution order.
+     * The operations are sorted into execution order. Every operand
+     * with lifetime MODEL_OUTPUT or TEMPORARY_VARIABLE must be
+     * written before it is read.
      */
     vec<Operation> operations;
 
     /**
-     * Input indexes of the model.
+     * Input indexes of the model. There must be at least one.
      *
      * Each value corresponds to the index of the operand in "operands".
      */
     vec<uint32_t> inputIndexes;
 
     /**
-     * Output indexes of the model.
+     * Output indexes of the model. There must be at least one.
      *
      * Each value corresponds to the index of the operand in "operands".
      */
@@ -404,8 +434,7 @@
     vec<uint8_t> operandValues;
 
     /**
-     * A collection of shared memory pools containing operand data that were
-     * registered by the model.
+     * A collection of shared memory pools containing operand values.
      *
      * An operand's value must be located here if and only if Operand::lifetime
      * equals OperandLifeTime::CONSTANT_REFERENCE.
diff --git a/neuralnetworks/1.1/vts/OWNERS b/neuralnetworks/1.1/vts/OWNERS
index 87e322b..b5a8e1f 100644
--- a/neuralnetworks/1.1/vts/OWNERS
+++ b/neuralnetworks/1.1/vts/OWNERS
@@ -2,9 +2,14 @@
 butlermichael@google.com
 dgross@google.com
 jeanluc@google.com
+levp@google.com
 miaowang@google.com
 mikie@google.com
+mks@google.com
 pszczepaniak@google.com
+slavash@google.com
+vddang@google.com
+xusongw@google.com
 
 # VTS team
 yim@google.com
diff --git a/neuralnetworks/1.1/vts/functional/Android.bp b/neuralnetworks/1.1/vts/functional/Android.bp
index f755c20..697252f 100644
--- a/neuralnetworks/1.1/vts/functional/Android.bp
+++ b/neuralnetworks/1.1/vts/functional/Android.bp
@@ -14,38 +14,22 @@
 // limitations under the License.
 //
 
+// Tests for V1_0 models using the V1_1 HAL.
+cc_test {
+    name: "VtsHalNeuralnetworksV1_1CompatV1_0TargetTest",
+    defaults: ["VtsHalNeuralNetworksTargetTestDefaults"],
+    srcs: [
+        "GeneratedTestsV1_0.cpp",
+    ],
+}
+
+// Tests for V1_1 models.
 cc_test {
     name: "VtsHalNeuralnetworksV1_1TargetTest",
+    defaults: ["VtsHalNeuralNetworksTargetTestDefaults"],
     srcs: [
         "BasicTests.cpp",
         "GeneratedTests.cpp",
-        "ValidateModel.cpp",
-        "ValidateRequest.cpp",
-        "ValidationTests.cpp",
-        "VtsHalNeuralnetworks.cpp",
     ],
-    defaults: ["VtsHalTargetTestDefaults"],
-    static_libs: [
-        "android.hardware.neuralnetworks@1.0",
-        "android.hardware.neuralnetworks@1.1",
-        "android.hidl.allocator@1.0",
-        "android.hidl.memory@1.0",
-        "libhidlmemory",
-        "libneuralnetworks_utils",
-        "VtsHalNeuralnetworksTest_utils",
-    ],
-    header_libs: [
-        "libneuralnetworks_headers",
-        "libneuralnetworks_generated_test_harness_headers",
-        "libneuralnetworks_generated_tests",
-    ],
-    // Bug: http://b/74200014 - Disable arm32 asan since it triggers internal
-    // error in ld.gold.
-    arch: {
-        arm: {
-            sanitize: {
-                never: true,
-            },
-        },
-    },
+    test_suites: ["general-tests"],
 }
diff --git a/neuralnetworks/1.1/vts/functional/GeneratedTests.cpp b/neuralnetworks/1.1/vts/functional/GeneratedTests.cpp
index 95c2b1a..d98ea04 100644
--- a/neuralnetworks/1.1/vts/functional/GeneratedTests.cpp
+++ b/neuralnetworks/1.1/vts/functional/GeneratedTests.cpp
@@ -31,24 +31,23 @@
 namespace neuralnetworks {
 
 namespace generated_tests {
-using ::test_helper::MixedTypedExampleType;
+using ::test_helper::MixedTypedExample;
 extern void Execute(const sp<V1_1::IDevice>&, std::function<V1_1::Model(void)>,
-                    std::function<bool(int)>, const std::vector<MixedTypedExampleType>&);
+                    std::function<bool(int)>, const std::vector<MixedTypedExample>&);
 }  // namespace generated_tests
 
 namespace V1_1 {
 namespace vts {
 namespace functional {
 
-using ::android::hardware::neuralnetworks::V1_0::implementation::ExecutionCallback;
-using ::android::hardware::neuralnetworks::V1_0::implementation::PreparedModelCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
 using ::android::nn::allocateSharedMemory;
+using ::test_helper::MixedTypedExample;
 
-// Mixed-typed examples
-typedef generated_tests::MixedTypedExampleType MixedTypedExample;
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
 
 // in frameworks/ml/nn/runtime/tests/generated/
-#include "all_generated_V1_0_vts_tests.cpp"
 #include "all_generated_V1_1_vts_tests.cpp"
 
 }  // namespace functional
diff --git a/neuralnetworks/1.1/vts/functional/GeneratedTestsV1_0.cpp b/neuralnetworks/1.1/vts/functional/GeneratedTestsV1_0.cpp
new file mode 100644
index 0000000..1df3218
--- /dev/null
+++ b/neuralnetworks/1.1/vts/functional/GeneratedTestsV1_0.cpp
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+#include "Callbacks.h"
+#include "TestHarness.h"
+#include "Utils.h"
+
+#include <android-base/logging.h>
+#include <android/hidl/memory/1.0/IMemory.h>
+#include <hidlmemory/mapping.h>
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+
+namespace generated_tests {
+using ::test_helper::MixedTypedExample;
+extern void Execute(const sp<V1_1::IDevice>&, std::function<V1_1::Model(void)>,
+                    std::function<bool(int)>, const std::vector<MixedTypedExample>&);
+}  // namespace generated_tests
+
+namespace V1_1 {
+namespace vts {
+namespace functional {
+
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
+using ::android::nn::allocateSharedMemory;
+using ::test_helper::MixedTypedExample;
+
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
+
+// in frameworks/ml/nn/runtime/tests/generated/
+#include "all_generated_V1_0_vts_tests.cpp"
+
+}  // namespace functional
+}  // namespace vts
+}  // namespace V1_1
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
diff --git a/neuralnetworks/1.1/vts/functional/Models.h b/neuralnetworks/1.1/vts/functional/Models.h
deleted file mode 100644
index cc0fac1..0000000
--- a/neuralnetworks/1.1/vts/functional/Models.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * Copyright (C) 2018 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef VTS_HAL_NEURALNETWORKS_V1_1_VTS_FUNCTIONAL_MODELS_H
-#define VTS_HAL_NEURALNETWORKS_V1_1_VTS_FUNCTIONAL_MODELS_H
-
-#define LOG_TAG "neuralnetworks_hidl_hal_test"
-
-#include "TestHarness.h"
-
-#include <android/hardware/neuralnetworks/1.0/types.h>
-#include <android/hardware/neuralnetworks/1.1/types.h>
-
-namespace android {
-namespace hardware {
-namespace neuralnetworks {
-namespace V1_1 {
-namespace vts {
-namespace functional {
-
-using MixedTypedExample = test_helper::MixedTypedExampleType;
-
-#define FOR_EACH_TEST_MODEL(FN)                                  \
-    FN(add)                                                      \
-    FN(add_broadcast_quant8)                                     \
-    FN(add_quant8)                                               \
-    FN(add_relaxed)                                              \
-    FN(avg_pool_float_1)                                         \
-    FN(avg_pool_float_1_relaxed)                                 \
-    FN(avg_pool_float_2)                                         \
-    FN(avg_pool_float_2_relaxed)                                 \
-    FN(avg_pool_float_3)                                         \
-    FN(avg_pool_float_3_relaxed)                                 \
-    FN(avg_pool_float_4)                                         \
-    FN(avg_pool_float_4_relaxed)                                 \
-    FN(avg_pool_float_5)                                         \
-    FN(avg_pool_float_5_relaxed)                                 \
-    FN(avg_pool_quant8_1)                                        \
-    FN(avg_pool_quant8_2)                                        \
-    FN(avg_pool_quant8_3)                                        \
-    FN(avg_pool_quant8_4)                                        \
-    FN(avg_pool_quant8_5)                                        \
-    FN(batch_to_space)                                           \
-    FN(batch_to_space_float_1)                                   \
-    FN(batch_to_space_float_1_relaxed)                           \
-    FN(batch_to_space_quant8_1)                                  \
-    FN(batch_to_space_relaxed)                                   \
-    FN(concat_float_1)                                           \
-    FN(concat_float_1_relaxed)                                   \
-    FN(concat_float_2)                                           \
-    FN(concat_float_2_relaxed)                                   \
-    FN(concat_float_3)                                           \
-    FN(concat_float_3_relaxed)                                   \
-    FN(concat_quant8_1)                                          \
-    FN(concat_quant8_2)                                          \
-    FN(concat_quant8_3)                                          \
-    FN(conv_1_h3_w2_SAME)                                        \
-    FN(conv_1_h3_w2_SAME_relaxed)                                \
-    FN(conv_1_h3_w2_VALID)                                       \
-    FN(conv_1_h3_w2_VALID_relaxed)                               \
-    FN(conv_3_h3_w2_SAME)                                        \
-    FN(conv_3_h3_w2_SAME_relaxed)                                \
-    FN(conv_3_h3_w2_VALID)                                       \
-    FN(conv_3_h3_w2_VALID_relaxed)                               \
-    FN(conv_float)                                               \
-    FN(conv_float_2)                                             \
-    FN(conv_float_2_relaxed)                                     \
-    FN(conv_float_channels)                                      \
-    FN(conv_float_channels_relaxed)                              \
-    FN(conv_float_channels_weights_as_inputs)                    \
-    FN(conv_float_channels_weights_as_inputs_relaxed)            \
-    FN(conv_float_large)                                         \
-    FN(conv_float_large_relaxed)                                 \
-    FN(conv_float_large_weights_as_inputs)                       \
-    FN(conv_float_large_weights_as_inputs_relaxed)               \
-    FN(conv_float_relaxed)                                       \
-    FN(conv_float_weights_as_inputs)                             \
-    FN(conv_float_weights_as_inputs_relaxed)                     \
-    FN(conv_quant8)                                              \
-    FN(conv_quant8_2)                                            \
-    FN(conv_quant8_channels)                                     \
-    FN(conv_quant8_channels_weights_as_inputs)                   \
-    FN(conv_quant8_large)                                        \
-    FN(conv_quant8_large_weights_as_inputs)                      \
-    FN(conv_quant8_overflow)                                     \
-    FN(conv_quant8_overflow_weights_as_inputs)                   \
-    FN(conv_quant8_weights_as_inputs)                            \
-    FN(depth_to_space_float_1)                                   \
-    FN(depth_to_space_float_1_relaxed)                           \
-    FN(depth_to_space_float_2)                                   \
-    FN(depth_to_space_float_2_relaxed)                           \
-    FN(depth_to_space_float_3)                                   \
-    FN(depth_to_space_float_3_relaxed)                           \
-    FN(depth_to_space_quant8_1)                                  \
-    FN(depth_to_space_quant8_2)                                  \
-    FN(depthwise_conv)                                           \
-    FN(depthwise_conv2d_float)                                   \
-    FN(depthwise_conv2d_float_2)                                 \
-    FN(depthwise_conv2d_float_2_relaxed)                         \
-    FN(depthwise_conv2d_float_large)                             \
-    FN(depthwise_conv2d_float_large_2)                           \
-    FN(depthwise_conv2d_float_large_2_relaxed)                   \
-    FN(depthwise_conv2d_float_large_2_weights_as_inputs)         \
-    FN(depthwise_conv2d_float_large_2_weights_as_inputs_relaxed) \
-    FN(depthwise_conv2d_float_large_relaxed)                     \
-    FN(depthwise_conv2d_float_large_weights_as_inputs)           \
-    FN(depthwise_conv2d_float_large_weights_as_inputs_relaxed)   \
-    FN(depthwise_conv2d_float_relaxed)                           \
-    FN(depthwise_conv2d_float_weights_as_inputs)                 \
-    FN(depthwise_conv2d_float_weights_as_inputs_relaxed)         \
-    FN(depthwise_conv2d_quant8)                                  \
-    FN(depthwise_conv2d_quant8_2)                                \
-    FN(depthwise_conv2d_quant8_large)                            \
-    FN(depthwise_conv2d_quant8_large_weights_as_inputs)          \
-    FN(depthwise_conv2d_quant8_weights_as_inputs)                \
-    FN(depthwise_conv_relaxed)                                   \
-    FN(dequantize)                                               \
-    FN(dequantize_relaxed)                                       \
-    FN(div)                                                      \
-    FN(div_broadcast_float)                                      \
-    FN(div_broadcast_float_relaxed)                              \
-    FN(div_relaxed)                                              \
-    FN(embedding_lookup)                                         \
-    FN(embedding_lookup_relaxed)                                 \
-    FN(floor)                                                    \
-    FN(floor_relaxed)                                            \
-    FN(fully_connected_float)                                    \
-    FN(fully_connected_float_2)                                  \
-    FN(fully_connected_float_2_relaxed)                          \
-    FN(fully_connected_float_4d_simple)                          \
-    FN(fully_connected_float_4d_simple_relaxed)                  \
-    FN(fully_connected_float_large)                              \
-    FN(fully_connected_float_large_relaxed)                      \
-    FN(fully_connected_float_large_weights_as_inputs)            \
-    FN(fully_connected_float_large_weights_as_inputs_relaxed)    \
-    FN(fully_connected_float_relaxed)                            \
-    FN(fully_connected_float_weights_as_inputs)                  \
-    FN(fully_connected_float_weights_as_inputs_relaxed)          \
-    FN(fully_connected_quant8)                                   \
-    FN(fully_connected_quant8_2)                                 \
-    FN(fully_connected_quant8_large)                             \
-    FN(fully_connected_quant8_large_weights_as_inputs)           \
-    FN(fully_connected_quant8_weights_as_inputs)                 \
-    FN(hashtable_lookup_float)                                   \
-    FN(hashtable_lookup_float_relaxed)                           \
-    FN(hashtable_lookup_quant8)                                  \
-    FN(l2_normalization)                                         \
-    FN(l2_normalization_2)                                       \
-    FN(l2_normalization_2_relaxed)                               \
-    FN(l2_normalization_large)                                   \
-    FN(l2_normalization_large_relaxed)                           \
-    FN(l2_normalization_relaxed)                                 \
-    FN(l2_pool_float)                                            \
-    FN(l2_pool_float_2)                                          \
-    FN(l2_pool_float_2_relaxed)                                  \
-    FN(l2_pool_float_large)                                      \
-    FN(l2_pool_float_large_relaxed)                              \
-    FN(l2_pool_float_relaxed)                                    \
-    FN(local_response_norm_float_1)                              \
-    FN(local_response_norm_float_1_relaxed)                      \
-    FN(local_response_norm_float_2)                              \
-    FN(local_response_norm_float_2_relaxed)                      \
-    FN(local_response_norm_float_3)                              \
-    FN(local_response_norm_float_3_relaxed)                      \
-    FN(local_response_norm_float_4)                              \
-    FN(local_response_norm_float_4_relaxed)                      \
-    FN(logistic_float_1)                                         \
-    FN(logistic_float_1_relaxed)                                 \
-    FN(logistic_float_2)                                         \
-    FN(logistic_float_2_relaxed)                                 \
-    FN(logistic_quant8_1)                                        \
-    FN(logistic_quant8_2)                                        \
-    FN(lsh_projection)                                           \
-    FN(lsh_projection_2)                                         \
-    FN(lsh_projection_2_relaxed)                                 \
-    FN(lsh_projection_relaxed)                                   \
-    FN(lsh_projection_weights_as_inputs)                         \
-    FN(lsh_projection_weights_as_inputs_relaxed)                 \
-    FN(lstm)                                                     \
-    FN(lstm2)                                                    \
-    FN(lstm2_relaxed)                                            \
-    FN(lstm2_state)                                              \
-    FN(lstm2_state2)                                             \
-    FN(lstm2_state2_relaxed)                                     \
-    FN(lstm2_state_relaxed)                                      \
-    FN(lstm3)                                                    \
-    FN(lstm3_relaxed)                                            \
-    FN(lstm3_state)                                              \
-    FN(lstm3_state2)                                             \
-    FN(lstm3_state2_relaxed)                                     \
-    FN(lstm3_state3)                                             \
-    FN(lstm3_state3_relaxed)                                     \
-    FN(lstm3_state_relaxed)                                      \
-    FN(lstm_relaxed)                                             \
-    FN(lstm_state)                                               \
-    FN(lstm_state2)                                              \
-    FN(lstm_state2_relaxed)                                      \
-    FN(lstm_state_relaxed)                                       \
-    FN(max_pool_float_1)                                         \
-    FN(max_pool_float_1_relaxed)                                 \
-    FN(max_pool_float_2)                                         \
-    FN(max_pool_float_2_relaxed)                                 \
-    FN(max_pool_float_3)                                         \
-    FN(max_pool_float_3_relaxed)                                 \
-    FN(max_pool_float_4)                                         \
-    FN(max_pool_float_4_relaxed)                                 \
-    FN(max_pool_quant8_1)                                        \
-    FN(max_pool_quant8_2)                                        \
-    FN(max_pool_quant8_3)                                        \
-    FN(max_pool_quant8_4)                                        \
-    FN(mean)                                                     \
-    FN(mean_float_1)                                             \
-    FN(mean_float_1_relaxed)                                     \
-    FN(mean_float_2)                                             \
-    FN(mean_float_2_relaxed)                                     \
-    FN(mean_quant8_1)                                            \
-    FN(mean_quant8_2)                                            \
-    FN(mean_relaxed)                                             \
-    FN(mobilenet_224_gender_basic_fixed)                         \
-    FN(mobilenet_224_gender_basic_fixed_relaxed)                 \
-    FN(mobilenet_quantized)                                      \
-    FN(mul)                                                      \
-    FN(mul_broadcast_quant8)                                     \
-    FN(mul_quant8)                                               \
-    FN(mul_relaxed)                                              \
-    FN(mul_relu)                                                 \
-    FN(mul_relu_relaxed)                                         \
-    FN(pad)                                                      \
-    FN(pad_float_1)                                              \
-    FN(pad_float_1_relaxed)                                      \
-    FN(pad_relaxed)                                              \
-    FN(relu1_float_1)                                            \
-    FN(relu1_float_1_relaxed)                                    \
-    FN(relu1_float_2)                                            \
-    FN(relu1_float_2_relaxed)                                    \
-    FN(relu1_quant8_1)                                           \
-    FN(relu1_quant8_2)                                           \
-    FN(relu6_float_1)                                            \
-    FN(relu6_float_1_relaxed)                                    \
-    FN(relu6_float_2)                                            \
-    FN(relu6_float_2_relaxed)                                    \
-    FN(relu6_quant8_1)                                           \
-    FN(relu6_quant8_2)                                           \
-    FN(relu_float_1)                                             \
-    FN(relu_float_1_relaxed)                                     \
-    FN(relu_float_2)                                             \
-    FN(relu_float_2_relaxed)                                     \
-    FN(relu_quant8_1)                                            \
-    FN(relu_quant8_2)                                            \
-    FN(reshape)                                                  \
-    FN(reshape_quant8)                                           \
-    FN(reshape_quant8_weights_as_inputs)                         \
-    FN(reshape_relaxed)                                          \
-    FN(reshape_weights_as_inputs)                                \
-    FN(reshape_weights_as_inputs_relaxed)                        \
-    FN(resize_bilinear)                                          \
-    FN(resize_bilinear_2)                                        \
-    FN(resize_bilinear_2_relaxed)                                \
-    FN(resize_bilinear_relaxed)                                  \
-    FN(rnn)                                                      \
-    FN(rnn_relaxed)                                              \
-    FN(rnn_state)                                                \
-    FN(rnn_state_relaxed)                                        \
-    FN(softmax_float_1)                                          \
-    FN(softmax_float_1_relaxed)                                  \
-    FN(softmax_float_2)                                          \
-    FN(softmax_float_2_relaxed)                                  \
-    FN(softmax_quant8_1)                                         \
-    FN(softmax_quant8_2)                                         \
-    FN(space_to_batch)                                           \
-    FN(space_to_batch_float_1)                                   \
-    FN(space_to_batch_float_1_relaxed)                           \
-    FN(space_to_batch_float_2)                                   \
-    FN(space_to_batch_float_2_relaxed)                           \
-    FN(space_to_batch_float_3)                                   \
-    FN(space_to_batch_float_3_relaxed)                           \
-    FN(space_to_batch_quant8_1)                                  \
-    FN(space_to_batch_quant8_2)                                  \
-    FN(space_to_batch_quant8_3)                                  \
-    FN(space_to_batch_relaxed)                                   \
-    FN(space_to_depth_float_1)                                   \
-    FN(space_to_depth_float_1_relaxed)                           \
-    FN(space_to_depth_float_2)                                   \
-    FN(space_to_depth_float_2_relaxed)                           \
-    FN(space_to_depth_float_3)                                   \
-    FN(space_to_depth_float_3_relaxed)                           \
-    FN(space_to_depth_quant8_1)                                  \
-    FN(space_to_depth_quant8_2)                                  \
-    FN(squeeze)                                                  \
-    FN(squeeze_float_1)                                          \
-    FN(squeeze_float_1_relaxed)                                  \
-    FN(squeeze_quant8_1)                                         \
-    FN(squeeze_relaxed)                                          \
-    FN(strided_slice)                                            \
-    FN(strided_slice_float_1)                                    \
-    FN(strided_slice_float_10)                                   \
-    FN(strided_slice_float_10_relaxed)                           \
-    FN(strided_slice_float_11)                                   \
-    FN(strided_slice_float_11_relaxed)                           \
-    FN(strided_slice_float_1_relaxed)                            \
-    FN(strided_slice_float_2)                                    \
-    FN(strided_slice_float_2_relaxed)                            \
-    FN(strided_slice_float_3)                                    \
-    FN(strided_slice_float_3_relaxed)                            \
-    FN(strided_slice_float_4)                                    \
-    FN(strided_slice_float_4_relaxed)                            \
-    FN(strided_slice_float_5)                                    \
-    FN(strided_slice_float_5_relaxed)                            \
-    FN(strided_slice_float_6)                                    \
-    FN(strided_slice_float_6_relaxed)                            \
-    FN(strided_slice_float_7)                                    \
-    FN(strided_slice_float_7_relaxed)                            \
-    FN(strided_slice_float_8)                                    \
-    FN(strided_slice_float_8_relaxed)                            \
-    FN(strided_slice_float_9)                                    \
-    FN(strided_slice_float_9_relaxed)                            \
-    FN(strided_slice_qaunt8_10)                                  \
-    FN(strided_slice_qaunt8_11)                                  \
-    FN(strided_slice_quant8_1)                                   \
-    FN(strided_slice_quant8_2)                                   \
-    FN(strided_slice_quant8_3)                                   \
-    FN(strided_slice_quant8_4)                                   \
-    FN(strided_slice_quant8_5)                                   \
-    FN(strided_slice_quant8_6)                                   \
-    FN(strided_slice_quant8_7)                                   \
-    FN(strided_slice_quant8_8)                                   \
-    FN(strided_slice_quant8_9)                                   \
-    FN(strided_slice_relaxed)                                    \
-    FN(sub)                                                      \
-    FN(sub_broadcast_float)                                      \
-    FN(sub_broadcast_float_relaxed)                              \
-    FN(sub_relaxed)                                              \
-    FN(svdf)                                                     \
-    FN(svdf2)                                                    \
-    FN(svdf2_relaxed)                                            \
-    FN(svdf_relaxed)                                             \
-    FN(svdf_state)                                               \
-    FN(svdf_state_relaxed)                                       \
-    FN(tanh)                                                     \
-    FN(tanh_relaxed)                                             \
-    FN(transpose)                                                \
-    FN(transpose_float_1)                                        \
-    FN(transpose_float_1_relaxed)                                \
-    FN(transpose_quant8_1)                                       \
-    FN(transpose_relaxed)
-
-#define FORWARD_DECLARE_GENERATED_OBJECTS(function) \
-    namespace function {                            \
-    extern std::vector<MixedTypedExample> examples; \
-    Model createTestModel();                        \
-    }
-
-FOR_EACH_TEST_MODEL(FORWARD_DECLARE_GENERATED_OBJECTS)
-
-#undef FORWARD_DECLARE_GENERATED_OBJECTS
-
-}  // namespace functional
-}  // namespace vts
-}  // namespace V1_1
-}  // namespace neuralnetworks
-}  // namespace hardware
-}  // namespace android
-
-#endif  // VTS_HAL_NEURALNETWORKS_V1_1_VTS_FUNCTIONAL_MODELS_H
diff --git a/neuralnetworks/1.1/vts/functional/ValidateModel.cpp b/neuralnetworks/1.1/vts/functional/ValidateModel.cpp
index 3aa55f8..b35a901 100644
--- a/neuralnetworks/1.1/vts/functional/ValidateModel.cpp
+++ b/neuralnetworks/1.1/vts/functional/ValidateModel.cpp
@@ -33,8 +33,8 @@
 namespace vts {
 namespace functional {
 
-using ::android::hardware::neuralnetworks::V1_0::implementation::ExecutionCallback;
-using ::android::hardware::neuralnetworks::V1_0::implementation::PreparedModelCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
 
 ///////////////////////// UTILITY FUNCTIONS /////////////////////////
 
@@ -299,7 +299,7 @@
         if (mutateOperationOperandTypeSkip(operand, model)) {
             continue;
         }
-        for (OperandType invalidOperandType : hidl_enum_iterator<OperandType>{}) {
+        for (OperandType invalidOperandType : hidl_enum_range<OperandType>{}) {
             // Do not test OEM types
             if (invalidOperandType == model.operands[operand].type ||
                 invalidOperandType == OperandType::OEM ||
diff --git a/neuralnetworks/1.1/vts/functional/ValidateRequest.cpp b/neuralnetworks/1.1/vts/functional/ValidateRequest.cpp
index 687b760..5225bf7 100644
--- a/neuralnetworks/1.1/vts/functional/ValidateRequest.cpp
+++ b/neuralnetworks/1.1/vts/functional/ValidateRequest.cpp
@@ -33,12 +33,12 @@
 namespace vts {
 namespace functional {
 
-using ::android::hardware::neuralnetworks::V1_0::implementation::ExecutionCallback;
-using ::android::hardware::neuralnetworks::V1_0::implementation::PreparedModelCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
 using ::android::hidl::memory::V1_0::IMemory;
-using test_helper::MixedTyped;
-using test_helper::MixedTypedExampleType;
 using test_helper::for_all;
+using test_helper::MixedTyped;
+using test_helper::MixedTypedExample;
 
 ///////////////////////// UTILITY FUNCTIONS /////////////////////////
 
@@ -152,15 +152,15 @@
 
 ///////////////////////////// ENTRY POINT //////////////////////////////////
 
-std::vector<Request> createRequests(const std::vector<MixedTypedExampleType>& examples) {
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples) {
     const uint32_t INPUT = 0;
     const uint32_t OUTPUT = 1;
 
     std::vector<Request> requests;
 
     for (auto& example : examples) {
-        const MixedTyped& inputs = example.first;
-        const MixedTyped& outputs = example.second;
+        const MixedTyped& inputs = example.operands.first;
+        const MixedTyped& outputs = example.operands.second;
 
         std::vector<RequestArgument> inputs_info, outputs_info;
         uint32_t inputSize = 0, outputSize = 0;
diff --git a/neuralnetworks/1.1/vts/functional/ValidationTests.cpp b/neuralnetworks/1.1/vts/functional/ValidationTests.cpp
deleted file mode 100644
index 1c35ba8..0000000
--- a/neuralnetworks/1.1/vts/functional/ValidationTests.cpp
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2018 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "neuralnetworks_hidl_hal_test"
-
-#include "Models.h"
-#include "VtsHalNeuralnetworks.h"
-
-namespace android {
-namespace hardware {
-namespace neuralnetworks {
-namespace V1_1 {
-namespace vts {
-namespace functional {
-
-// forward declarations
-std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
-
-// generate validation tests
-#define VTS_CURRENT_TEST_CASE(TestName)                                           \
-    TEST_F(ValidationTest, TestName) {                                            \
-        const Model model = TestName::createTestModel();                          \
-        const std::vector<Request> requests = createRequests(TestName::examples); \
-        validateModel(model);                                                     \
-        validateRequests(model, requests);                                        \
-    }
-
-FOR_EACH_TEST_MODEL(VTS_CURRENT_TEST_CASE)
-
-#undef VTS_CURRENT_TEST_CASE
-
-}  // namespace functional
-}  // namespace vts
-}  // namespace V1_1
-}  // namespace neuralnetworks
-}  // namespace hardware
-}  // namespace android
diff --git a/neuralnetworks/1.1/vts/functional/VtsHalNeuralnetworks.h b/neuralnetworks/1.1/vts/functional/VtsHalNeuralnetworks.h
index 0050e52..970e8b5 100644
--- a/neuralnetworks/1.1/vts/functional/VtsHalNeuralnetworks.h
+++ b/neuralnetworks/1.1/vts/functional/VtsHalNeuralnetworks.h
@@ -34,9 +34,12 @@
 namespace neuralnetworks {
 namespace V1_1 {
 
-using V1_0::Request;
 using V1_0::DeviceStatus;
 using V1_0::ErrorStatus;
+using V1_0::IPreparedModel;
+using V1_0::Operand;
+using V1_0::OperandType;
+using V1_0::Request;
 
 namespace vts {
 namespace functional {
diff --git a/neuralnetworks/1.2/Android.bp b/neuralnetworks/1.2/Android.bp
new file mode 100644
index 0000000..528a2c7
--- /dev/null
+++ b/neuralnetworks/1.2/Android.bp
@@ -0,0 +1,32 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.neuralnetworks@1.2",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IDevice.hal",
+        "IExecutionCallback.hal",
+        "IPreparedModel.hal",
+        "IPreparedModelCallback.hal",
+    ],
+    interfaces: [
+        "android.hardware.neuralnetworks@1.0",
+        "android.hardware.neuralnetworks@1.1",
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "Model",
+        "Operand",
+        "OperandType",
+        "OperandTypeRange",
+        "Operation",
+        "OperationType",
+        "OperationTypeRange",
+    ],
+    gen_java: false,
+}
+
diff --git a/neuralnetworks/1.2/IDevice.hal b/neuralnetworks/1.2/IDevice.hal
new file mode 100644
index 0000000..6a77961
--- /dev/null
+++ b/neuralnetworks/1.2/IDevice.hal
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.neuralnetworks@1.2;
+
+import @1.0::ErrorStatus;
+import @1.1::ExecutionPreference;
+import @1.1::IDevice;
+import IPreparedModelCallback;
+
+/**
+ * This interface represents a device driver.
+ */
+interface IDevice extends @1.1::IDevice {
+    /**
+     * Get the version string of the driver implementation.
+     *
+     * The version string must be a unique token among the set of version strings of
+     * drivers of a specific device. The token identifies the device driver's
+     * implementation. The token must not be confused with the feature level which is solely
+     * defined by the interface version. This API is opaque to the Android framework, but the
+     * Android framework may use the information for debugging or to pass on to NNAPI applications.
+     *
+     * Application developers sometimes have specific requirements to ensure good user experiences,
+     * and they need more information to make intelligent decisions when the Android framework cannot.
+     * For example, combined with the device name and other information, the token can help
+     * NNAPI applications filter devices based on their needs:
+     *     - An application demands a certain level of performance, but a specific version of
+     *       the driver cannot meet that requirement because of a performance regression.
+     *       The application can blacklist the driver based on the version provided.
+     *     - An application has a minimum precision requirement, but certain versions of
+     *       the driver cannot meet that requirement because of bugs or certain optimizations.
+     *       The application can filter out versions of these drivers.
+     *
+     * @return status Error status returned from querying the version string. Must be:
+     *     - NONE if the query was successful
+     *     - DEVICE_UNAVAILABLE if driver is offline or busy
+     *     - GENERAL_FAILURE if the query resulted in an
+     *       unspecified error
+     * @return version The version string of the device implementation.
+     *     Must have nonzero length
+     */
+    getVersionString() generates (ErrorStatus status, string version);
+
+    /**
+     * Gets the supported operations in a model.
+     *
+     * getSupportedOperations indicates which operations of a model are fully
+     * supported by the vendor driver. If an operation may not be supported for
+     * any reason, getSupportedOperations must return false for that operation.
+     *
+     * @param model A model whose operations--and their corresponding operands--
+     *     are to be verified by the driver.
+     * @return status Error status of the call, must be:
+     *     - NONE if successful
+     *     - DEVICE_UNAVAILABLE if driver is offline or busy
+     *     - GENERAL_FAILURE if there is an unspecified error
+     *     - INVALID_ARGUMENT if provided model is invalid
+     * @return supportedOperations A list of supported operations, where true
+     *     indicates the operation is supported and false indicates the
+     *     operation is not supported. The index of "supported" corresponds with
+     *     the index of the operation it is describing.
+     */
+    getSupportedOperations_1_2(Model model)
+            generates (ErrorStatus status, vec<bool> supportedOperations);
+
+    /**
+     * Creates a prepared model for execution.
+     *
+     * prepareModel is used to make any necessary transformations or alternative
+     * representations to a model for execution, possibly including
+     * transformations on the constant data, optimization on the model's graph,
+     * or compilation into the device's native binary format. The model itself
+     * is not changed.
+     *
+     * The model is prepared asynchronously with respect to the caller. The
+     * prepareModel function must verify the inputs to the prepareModel function
+     * are correct. If there is an error, prepareModel must immediately invoke
+     * the callback with the appropriate ErrorStatus value and nullptr for the
+     * IPreparedModel, then return with the same ErrorStatus. If the inputs to
+     * the prepareModel function are valid and there is no error, prepareModel
+     * must launch an asynchronous task to prepare the model in the background,
+     * and immediately return from prepareModel with ErrorStatus::NONE. If the
+     * asynchronous task fails to launch, prepareModel must immediately invoke
+     * the callback with ErrorStatus::GENERAL_FAILURE and nullptr for the
+     * IPreparedModel, then return with ErrorStatus::GENERAL_FAILURE.
+     *
+     * When the asynchronous task has finished preparing the model, it must
+     * immediately invoke the callback function provided as an input to
+     * prepareModel. If the model was prepared successfully, the callback object
+     * must be invoked with an error status of ErrorStatus::NONE and the
+     * produced IPreparedModel object. If an error occurred preparing the model,
+     * the callback object must be invoked with the appropriate ErrorStatus
+     * value and nullptr for the IPreparedModel.
+     *
+     * The only information that may be unknown to the model at this stage is
+     * the shape of the tensors, which may only be known at execution time. As
+     * such, some driver services may return partially prepared models, where
+     * the prepared model may only be finished when it is paired with a set of
+     * inputs to the model. Note that the same prepared model object may be
+     * used with different shapes of inputs on different (possibly concurrent)
+     * executions.
+     *
+     * Multiple threads may call prepareModel on the same model concurrently.
+     *
+     * @param model The model to be prepared for execution.
+     * @param preference Indicates the intended execution behavior of a prepared
+     *     model.
+     * @param callback A callback object used to return the error status of
+     *     preparing the model for execution and the prepared model if
+     *     successful, nullptr otherwise. The callback object's notify function
+     *     must be called exactly once, even if the model could not be prepared.
+     * @return status Error status of launching a task which prepares the model
+     *     in the background; must be:
+     *     - NONE if preparation task is successfully launched
+     *     - DEVICE_UNAVAILABLE if driver is offline or busy
+     *     - GENERAL_FAILURE if there is an unspecified error
+     *     - INVALID_ARGUMENT if one of the input arguments is invalid
+     */
+    prepareModel_1_2(Model model, ExecutionPreference preference,
+                     IPreparedModelCallback callback)
+          generates (ErrorStatus status);
+};
diff --git a/neuralnetworks/1.2/IExecutionCallback.hal b/neuralnetworks/1.2/IExecutionCallback.hal
new file mode 100644
index 0000000..667e0d6
--- /dev/null
+++ b/neuralnetworks/1.2/IExecutionCallback.hal
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.neuralnetworks@1.2;
+
+import @1.0::ErrorStatus;
+import @1.0::IExecutionCallback;
+
+/**
+ * IExecutionCallback must be used to return the error status result from an
+ * execution asynchronously launched from IPreparedModel::execute.
+ */
+interface IExecutionCallback extends @1.0::IExecutionCallback {
+
+    /**
+     * Either notify_1_2 or notify must be invoked immediately after the asynchronous
+     * task has finished performing the execution. Either notify_1_2 or notify must be
+     * provided with the ErrorStatus from the execution. If the asynchronous task is
+     * not launched, either notify_1_2 or notify must be invoked with the appropriate
+     * error.
+     *
+     * @param status Error status returned from launching the asynchronous task
+     *               (if the launch fails) or from the asynchronous task itself
+     *               (if the launch succeeds). Must be:
+     *               - NONE if the asynchronous execution was successful
+     *               - DEVICE_UNAVAILABLE if driver is offline or busy
+     *               - GENERAL_FAILURE if the asynchronous task resulted in an
+     *                 unspecified error
+     *               - OUTPUT_INSUFFICIENT_SIZE if provided output buffer is
+     *                 not large enough to store the resultant values
+     *               - INVALID_ARGUMENT if one of the input arguments to
+     *                 prepareModel is invalid
+     */
+    oneway notify_1_2(ErrorStatus status);
+};
diff --git a/neuralnetworks/1.2/IPreparedModel.hal b/neuralnetworks/1.2/IPreparedModel.hal
new file mode 100644
index 0000000..4e91c67
--- /dev/null
+++ b/neuralnetworks/1.2/IPreparedModel.hal
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.neuralnetworks@1.2;
+
+import @1.0::ErrorStatus;
+import @1.0::IPreparedModel;
+import @1.0::Request;
+import IExecutionCallback;
+
+/**
+ * IPreparedModel describes a model that has been prepared for execution and
+ * is used to launch executions.
+ */
+interface IPreparedModel extends @1.0::IPreparedModel {
+    /**
+     * Launches an asynchronous execution on a prepared model.
+     *
+     * The execution is performed asynchronously with respect to the caller.
+     * execute_1_2 must verify the inputs to the function are correct. If there is
+     * an error, execute_1_2 must immediately invoke the callback with the
+     * appropriate ErrorStatus value, then return with the same ErrorStatus. If
+     * the inputs to the function are valid and there is no error, execute_1_2 must
+     * launch an asynchronous task to perform the execution in the background,
+     * and immediately return with ErrorStatus::NONE. If the asynchronous task
+     * fails to launch, execute_1_2 must immediately invoke the callback with
+     * ErrorStatus::GENERAL_FAILURE, then return with
+     * ErrorStatus::GENERAL_FAILURE.
+     *
+     * When the asynchronous task has finished its execution, it must
+     * immediately invoke the callback object provided as an input to the
+     * execute_1_2 function. This callback must be provided with the ErrorStatus of
+     * the execution.
+     *
+     * If the prepared model was prepared from a model wherein all
+     * tensor operands have fully specified dimensions, and the inputs
+     * to the function are valid, then the execution should launch
+     * and complete successfully (ErrorStatus::NONE). There must be
+     * no failure unless the device itself is in a bad state.
+     *
+     * Any number of calls to the execute, execute_1_2, and executeSynchronously
+     * functions, in any combination, may be made concurrently, even on the same
+     * IPreparedModel object.
+     *
+     * @param request The input and output information on which the prepared
+     *                model is to be executed.
+     * @param callback A callback object used to return the error status of
+     *                 the execution. The callback object's notify function must
+     *                 be called exactly once, even if the execution was
+     *                 unsuccessful.
+     * @return status Error status of the call, must be:
+     *                - NONE if task is successfully launched
+     *                - DEVICE_UNAVAILABLE if driver is offline or busy
+     *                - GENERAL_FAILURE if there is an unspecified error
+     *                - OUTPUT_INSUFFICIENT_SIZE if provided output buffer is
+     *                  not large enough to store the resultant values
+     *                - INVALID_ARGUMENT if one of the input arguments is
+     *                  invalid
+     */
+    execute_1_2(Request request, IExecutionCallback callback)
+        generates (ErrorStatus status);
+
+    /**
+     * Performs a synchronous execution on a prepared model.
+     *
+     * The execution is performed synchronously with respect to the caller.
+     * executeSynchronously must verify the inputs to the function are
+     * correct. If there is an error, executeSynchronously must immediately
+     * return with the appropriate ErrorStatus value. If the inputs to the
+     * function are valid and there is no error, executeSynchronously must
+     * perform the execution, and must not return until the execution is
+     * complete.
+     *
+     * If the prepared model was prepared from a model wherein all tensor
+     * operands have fully specified dimensions, and the inputs to the function
+     * are valid, then the execution should complete successfully
+     * (ErrorStatus::NONE). There must be no failure unless the device itself is
+     * in a bad state.
+     *
+     * Any number of calls to the execute, execute_1_2, and executeSynchronously
+     * functions, in any combination, may be made concurrently, even on the same
+     * IPreparedModel object.
+     *
+     * @param request The input and output information on which the prepared
+     *                model is to be executed.
+     * @return status Error status of the execution, must be:
+     *                - NONE if execution is performed successfully
+     *                - DEVICE_UNAVAILABLE if driver is offline or busy
+     *                - GENERAL_FAILURE if there is an unspecified error
+     *                - OUTPUT_INSUFFICIENT_SIZE if provided output buffer is
+     *                  not large enough to store the resultant values
+     *                - INVALID_ARGUMENT if one of the input arguments is
+     *                  invalid
+     */
+    executeSynchronously(Request request)
+        generates (ErrorStatus status);
+};
diff --git a/neuralnetworks/1.2/IPreparedModelCallback.hal b/neuralnetworks/1.2/IPreparedModelCallback.hal
new file mode 100644
index 0000000..d3830c6
--- /dev/null
+++ b/neuralnetworks/1.2/IPreparedModelCallback.hal
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.neuralnetworks@1.2;
+
+import @1.0::ErrorStatus;
+import @1.0::IPreparedModelCallback;
+import IPreparedModel;
+
+/**
+ * IPreparedModelCallback must be used to return a prepared model produced by an
+ * asynchronous task launched from IDevice::prepareModel.
+ */
+interface IPreparedModelCallback extends @1.0::IPreparedModelCallback {
+
+    /**
+     * Either notify_1_2 or notify must be invoked immediately after the asynchronous
+     * task holding this callback has finished preparing the model. If the model was
+     * successfully prepared, either notify_1_2 or notify must be invoked with
+     * ErrorStatus::NONE and the prepared model. If the model was not able to be
+     * successfully prepared, either notify_1_2 or notify must be invoked with the
+     * appropriate ErrorStatus and nullptr as the IPreparedModel. If the asynchronous
+     * task holding this callback fails to launch or if the model provided to
+     * IDevice::prepareModel is invalid, either notify_1_2 or notify must be invoked
+     * with the appropriate error as well as nullptr for the IPreparedModel.
+     *
+     * @param status Error status returned from the asynchronous model
+     *               preparation task; must be:
+     *               - NONE if the asynchronous task successfully prepared the
+     *                 model
+     *               - DEVICE_UNAVAILABLE if driver is offline or busy
+     *               - GENERAL_FAILURE if the asynchronous task resulted in an
+     *                 unspecified error
+     *               - INVALID_ARGUMENT if one of the input arguments to
+     *                 prepareModel is invalid
+     * @param preparedModel A model that has been asynchronously prepared for
+     *                      execution. If the model was unable to be prepared
+     *                      due to an error, nullptr must be passed in place of
+     *                      the IPreparedModel object.
+     */
+    oneway notify_1_2(ErrorStatus status, IPreparedModel preparedModel);
+};
diff --git a/neuralnetworks/1.2/types.hal b/neuralnetworks/1.2/types.hal
new file mode 100644
index 0000000..7824d23
--- /dev/null
+++ b/neuralnetworks/1.2/types.hal
@@ -0,0 +1,332 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.neuralnetworks@1.2;
+
+import @1.0::DataLocation;
+import @1.0::OperandLifeTime;
+import @1.0::OperandType;
+import @1.0::PerformanceInfo;
+import @1.1::OperationType;
+
+enum OperandType : @1.0::OperandType {
+    /**
+     * An 8 bit boolean scalar value.
+     *
+     * Values of this operand type are either true or false. A zero value
+     * represents false; any other value represents true.
+     */
+    BOOL = 6,
+    /**
+     * A tensor of 16 bit signed integers that represent real numbers.
+     *
+     * Attached to this tensor is a number representing real value scale that is
+     * used to convert the 16 bit number to a real value in the following way:
+     * realValue = integerValue * scale.
+     *
+     * scale is a 32 bit floating point with value greater then zero.
+     */
+    TENSOR_QUANT16_SYMM = 7,
+    /** A tensor of IEEE 754 16 bit floating point values. */
+    TENSOR_FLOAT16 = 8,
+    /**
+     * A tensor of 8 bit boolean values.
+     *
+     * Values of this operand type are either true or false. A zero value
+     * represents false; any other value represents true.
+     */
+    TENSOR_BOOL8 = 9,
+    /** An IEEE 754 16 bit floating point scalar value. */
+    FLOAT16 = 10,
+    /* ADDING A NEW FUNDAMENTAL TYPE REQUIRES UPDATING THE VALUE OF
+     * OperandTypeRange::OPERAND_FUNDAMENTAL_MAX.
+     */
+    /* ADDING A NEW OEM TYPE REQUIRES UPDATING THE VALUE OF
+     * OperandTypeRange::OPERAND_OEM_MAX.
+     */
+};
+
+/**
+ * The range of operand values in the OperandType enum.
+ */
+enum OperandTypeRange : uint32_t {
+    OPERAND_FUNDAMENTAL_MIN = 0,
+    OPERAND_FUNDAMENTAL_MAX = 10,
+    OPERAND_OEM_MIN     = 10000,
+    OPERAND_OEM_MAX     = 10001,
+};
+
+/**
+ * Operation types.
+ *
+ * The type of an operation in a model.
+ */
+enum OperationType : @1.1::OperationType {
+    // TODO(b/116445845): Sync docs when all ops are implemented.
+    ARGMAX = 38,
+    ARGMIN = 39,
+    PAD_V2 = 40,
+    AXIS_ALIGNED_BBOX_TRANSFORM = 41,
+    BIDIRECTIONAL_SEQUENCE_LSTM = 42,
+    BIDIRECTIONAL_SEQUENCE_RNN = 43,
+    BOX_WITH_NMS_LIMIT = 44,
+    CAST = 45,
+    CHANNEL_SHUFFLE = 46,
+    DETECTION_OUTPUT = 47,
+    EMBEDDING_LOOKUP_SPARSE = 48,
+    EXP = 49,
+    EXPAND_DIMS = 50,
+    GATHER = 51,
+    GENERATE_PROPOSALS = 52,
+    GREATER = 53,
+    GREATER_EQUAL = 54,
+    GROUPED_CONV_2D = 55,
+    HEATMAP_MAX_KEYPOINT = 56,
+    LESS = 57,
+    LESS_EQUAL = 58,
+    LOG = 59,
+    LOGICAL_AND = 60,
+    LOGICAL_NOT = 61,
+    LOGICAL_OR = 62,
+    LOG_SOFTMAX = 63,
+    MAXIMUM = 64,
+    MINIMUM = 65,
+    NEG = 66,
+    POW = 67,
+    PRELU = 68,
+    PRIOR_BOX = 69,
+    QUANTIZE = 70,
+    QUANTIZED_16BIT_LSTM = 71,
+    RANDOM_MULTINOMIAL = 72,
+    REDUCE_PROD = 73,
+    ROI_ALIGN = 74,
+    RSQRT = 75,
+    SELECT = 76,
+    SIN = 77,
+    SLICE = 78,
+    SPARSE_TO_DENSE = 79,
+    SPLIT = 80,
+    SQRT = 81,
+    TILE = 82,
+    TOPK_V2 = 83,
+    TRANSPOSE_CONV_2D = 84,
+    UNIDIRECTIONAL_SEQUENCE_LSTM = 85,
+    UNIDIRECTIONAL_SEQUENCE_RNN = 86,
+    ROTATED_BBOX_TRANSFORM = 87,
+    ABS = 88,
+    ROI_POOLING = 89,
+    EQUAL = 90,
+    NOT_EQUAL = 91,
+    REDUCE_SUM = 92,
+    REDUCE_MAX = 93,
+    REDUCE_MIN = 94,
+    REDUCE_ANY = 95,
+    REDUCE_ALL = 96,
+    /* ADDING A NEW FUNDAMENTAL OPERATION REQUIRES UPDATING THE VALUE OF
+     * OperationTypeRange::OPERATION_FUNDAMENTAL_MAX.
+     */
+    /* ADDING A NEW OEM OPERATION REQUIRES UPDATING THE VALUE OF
+     * OperationTypeRange::OPERATION_OEM_MAX.
+     */
+};
+
+/**
+ * The range of values in the OperationType enum.
+ */
+enum OperationTypeRange : uint32_t {
+    OPERATION_FUNDAMENTAL_MIN = 0,
+    OPERATION_FUNDAMENTAL_MAX = 96,
+    OPERATION_OEM_MIN = 10000,
+    OPERATION_OEM_MAX = 10000,
+};
+
+/**
+ * Describes one operation of the model's graph.
+ */
+struct Operation {
+    /**
+     * The operation type.
+     */
+    OperationType type;
+
+    /**
+     * Describes the table that contains the indexes of the inputs of the
+     * operation. The offset is the index in the operandIndexes table.
+     */
+    vec<uint32_t> inputs;
+
+    /**
+     * Describes the table that contains the indexes of the outputs of the
+     * operation. The offset is the index in the operandIndexes table.
+     */
+    vec<uint32_t> outputs;
+};
+
+/**
+ * Describes one operand of the model's graph.
+ */
+struct Operand {
+    /**
+     * Data type of the operand.
+     */
+    OperandType type;
+
+    /**
+     * Dimensions of the operand.
+     *
+     * For a scalar operand, dimensions.size() must be 0.
+     *
+     * For a tensor operand, dimensions.size() must be at least 1;
+     * however, any of the dimensions may be unspecified.
+     *
+     * A tensor operand with all dimensions specified has "fully
+     * specified" dimensions. Whenever possible (i.e., whenever the
+     * dimensions are known at model construction time), a tensor
+     * operand should have (but is not required to have) fully
+     * specified dimensions, in order to enable the best possible
+     * performance.
+     *
+     * If a tensor operand's dimensions are not fully specified, the
+     * dimensions of the operand are deduced from the operand
+     * dimensions and values of the operation for which that operand
+     * is an output.
+     *
+     * In the following situations, a tensor operand's dimensions must
+     * be fully specified:
+     *
+     *     . The operand has lifetime CONSTANT_COPY or
+     *       CONSTANT_REFERENCE.
+     *
+     *     . The operand has lifetime MODEL_INPUT or MODEL_OUTPUT. Fully
+     *       specified dimensions must either be present in the
+     *       Operand or they must be provided in the corresponding
+     *       RequestArgument.
+     *       EXCEPTION: If the input or output is optional and omitted
+     *       (by setting the hasNoValue field of the corresponding
+     *       RequestArgument to true) then it need not have fully
+     *       specified dimensions.
+     *
+     * A tensor operand with some number of unspecified dimensions is
+     * represented by setting each unspecified dimension to 0.
+     */
+    vec<uint32_t> dimensions;
+
+    /**
+     * The number of times this operand appears as an operation input.
+     *
+     * (For example, if this operand appears once in one operation's
+     * input list, and three times in another operation's input list,
+     * then numberOfConsumers = 4.)
+     */
+    uint32_t numberOfConsumers;
+
+    /**
+     * Quantized scale of the operand.
+     *
+     * Only applicable if the operand is of type TENSOR_QUANT8_ASYMM or
+     * TENSOR_INT32.
+     */
+    float scale;
+
+    /**
+     * Quantized zero-point offset of the operand.
+     *
+     * Only applicable if the operand is of type TENSOR_QUANT8_ASYMM.
+     */
+    int32_t zeroPoint;
+
+    /**
+     * How the operand is used.
+     */
+    OperandLifeTime lifetime;
+
+    /**
+     * Where to find the data for this operand.
+     * If the lifetime is TEMPORARY_VARIABLE, MODEL_INPUT, MODEL_OUTPUT, or
+     * NO_VALUE:
+     * - All the fields must be 0.
+     * If the lifetime is CONSTANT_COPY:
+     * - location.poolIndex is 0.
+     * - location.offset is the offset in bytes into Model.operandValues.
+     * - location.length is set.
+     * If the lifetime is CONSTANT_REFERENCE:
+     * - location.poolIndex is set.
+     * - location.offset is the offset in bytes into the specified pool.
+     * - location.length is set.
+     */
+    DataLocation location;
+};
+
+/**
+ * A Neural Network Model.
+ *
+ * This includes not only the execution graph, but also constant data such as
+ * weights or scalars added at construction time. The only information that
+ * may not be known is the shape of the input tensors.
+ */
+struct Model {
+    /**
+     * All operands included in the model.
+     */
+    vec<Operand> operands;
+
+    /**
+     * All operations included in the model.
+     *
+     * The operations are sorted into execution order. Every operand
+     * with lifetime MODEL_OUTPUT or TEMPORARY_VARIABLE must be
+     * written before it is read.
+     */
+    vec<Operation> operations;
+
+    /**
+     * Input indexes of the model. There must be at least one.
+     *
+     * Each value corresponds to the index of the operand in "operands".
+     */
+    vec<uint32_t> inputIndexes;
+
+    /**
+     * Output indexes of the model. There must be at least one.
+     *
+     * Each value corresponds to the index of the operand in "operands".
+     */
+    vec<uint32_t> outputIndexes;
+
+    /**
+     * A byte buffer containing operand data that were copied into the model.
+     *
+     * An operand's value must be located here if and only if Operand::lifetime
+     * equals OperandLifeTime::CONSTANT_COPY.
+     */
+    vec<uint8_t> operandValues;
+
+    /**
+     * A collection of shared memory pools containing operand values.
+     *
+     * An operand's value must be located here if and only if Operand::lifetime
+     * equals OperandLifeTime::CONSTANT_REFERENCE.
+     */
+    vec<memory> pools;
+
+    /**
+     * 'true' indicates TENSOR_FLOAT32 may be calculated with range and/or
+     * precision as low as that of the IEEE 754 16-bit floating-point format.
+     * 'false' indicates TENSOR_FLOAT32 must be calculated using at least the
+     * range and precision of the IEEE 754 32-bit floating-point format.
+     */
+    bool relaxComputationFloat32toFloat16;
+};
diff --git a/neuralnetworks/1.2/vts/OWNERS b/neuralnetworks/1.2/vts/OWNERS
new file mode 100644
index 0000000..b5a8e1f
--- /dev/null
+++ b/neuralnetworks/1.2/vts/OWNERS
@@ -0,0 +1,16 @@
+# Neuralnetworks team
+butlermichael@google.com
+dgross@google.com
+jeanluc@google.com
+levp@google.com
+miaowang@google.com
+mikie@google.com
+mks@google.com
+pszczepaniak@google.com
+slavash@google.com
+vddang@google.com
+xusongw@google.com
+
+# VTS team
+yim@google.com
+yuexima@google.com
diff --git a/neuralnetworks/1.2/vts/functional/Android.bp b/neuralnetworks/1.2/vts/functional/Android.bp
new file mode 100644
index 0000000..0f3ddc4
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/Android.bp
@@ -0,0 +1,44 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+// Tests for V1_0 models using the V1_2 HAL.
+cc_test {
+    name: "VtsHalNeuralnetworksV1_2CompatV1_0TargetTest",
+    defaults: ["VtsHalNeuralNetworksTargetTestDefaults"],
+    srcs: [
+        "GeneratedTestsV1_0.cpp",
+    ]
+}
+
+// Tests for V1_1 models using the V1_2 HAL.
+cc_test {
+    name: "VtsHalNeuralnetworksV1_2CompatV1_1TargetTest",
+    defaults: ["VtsHalNeuralNetworksTargetTestDefaults"],
+    srcs: [
+        "GeneratedTestsV1_1.cpp",
+    ],
+}
+
+// Tests for V1_2 models.
+cc_test {
+    name: "VtsHalNeuralnetworksV1_2TargetTest",
+    defaults: ["VtsHalNeuralNetworksTargetTestDefaults"],
+    srcs: [
+        "BasicTests.cpp",
+        "GeneratedTests.cpp",
+    ],
+    test_suites: ["general-tests"],
+}
diff --git a/neuralnetworks/1.2/vts/functional/BasicTests.cpp b/neuralnetworks/1.2/vts/functional/BasicTests.cpp
new file mode 100644
index 0000000..eb3ebd3
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/BasicTests.cpp
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+namespace V1_2 {
+namespace vts {
+namespace functional {
+
+using V1_1::Capabilities;
+
+// create device test
+TEST_F(NeuralnetworksHidlTest, CreateDevice) {}
+
+// status test
+TEST_F(NeuralnetworksHidlTest, StatusTest) {
+    Return<DeviceStatus> status = device->getStatus();
+    ASSERT_TRUE(status.isOk());
+    EXPECT_EQ(DeviceStatus::AVAILABLE, static_cast<DeviceStatus>(status));
+}
+
+// device version test
+TEST_F(NeuralnetworksHidlTest, GetDeviceVersionStringTest) {
+    Return<void> ret = device->getVersionString([](ErrorStatus status, const hidl_string& version) {
+        EXPECT_EQ(ErrorStatus::NONE, status);
+        EXPECT_LT(0, version.size());
+    });
+    EXPECT_TRUE(ret.isOk());
+}
+}  // namespace functional
+}  // namespace vts
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
diff --git a/neuralnetworks/1.2/vts/functional/GeneratedTests.cpp b/neuralnetworks/1.2/vts/functional/GeneratedTests.cpp
new file mode 100644
index 0000000..9bff09c
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/GeneratedTests.cpp
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+#include "Callbacks.h"
+#include "TestHarness.h"
+#include "Utils.h"
+
+#include <android-base/logging.h>
+#include <android/hidl/memory/1.0/IMemory.h>
+#include <hidlmemory/mapping.h>
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+
+namespace generated_tests {
+using ::test_helper::MixedTypedExample;
+extern void Execute(const sp<V1_2::IDevice>&, std::function<V1_2::Model(void)>,
+                    std::function<bool(int)>, const std::vector<MixedTypedExample>&);
+}  // namespace generated_tests
+
+namespace V1_2 {
+namespace vts {
+namespace functional {
+
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
+using ::android::nn::allocateSharedMemory;
+using ::test_helper::MixedTypedExample;
+
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
+
+// in frameworks/ml/nn/runtime/tests/generated/
+#include "all_generated_V1_2_vts_tests.cpp"
+
+}  // namespace functional
+}  // namespace vts
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
diff --git a/neuralnetworks/1.2/vts/functional/GeneratedTestsV1_0.cpp b/neuralnetworks/1.2/vts/functional/GeneratedTestsV1_0.cpp
new file mode 100644
index 0000000..56a61d4
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/GeneratedTestsV1_0.cpp
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+#include "Callbacks.h"
+#include "TestHarness.h"
+#include "Utils.h"
+
+#include <android-base/logging.h>
+#include <android/hidl/memory/1.0/IMemory.h>
+#include <hidlmemory/mapping.h>
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+
+namespace generated_tests {
+using ::test_helper::MixedTypedExample;
+extern void Execute(const sp<V1_2::IDevice>&, std::function<V1_2::Model(void)>,
+                    std::function<bool(int)>, const std::vector<MixedTypedExample>&);
+}  // namespace generated_tests
+
+namespace V1_2 {
+namespace vts {
+namespace functional {
+
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
+using ::android::nn::allocateSharedMemory;
+using ::test_helper::MixedTypedExample;
+
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
+
+// in frameworks/ml/nn/runtime/tests/generated/
+#include "all_generated_V1_0_vts_tests.cpp"
+
+}  // namespace functional
+}  // namespace vts
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
diff --git a/neuralnetworks/1.2/vts/functional/GeneratedTestsV1_1.cpp b/neuralnetworks/1.2/vts/functional/GeneratedTestsV1_1.cpp
new file mode 100644
index 0000000..1c781ec
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/GeneratedTestsV1_1.cpp
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+#include "Callbacks.h"
+#include "TestHarness.h"
+#include "Utils.h"
+
+#include <android-base/logging.h>
+#include <android/hidl/memory/1.0/IMemory.h>
+#include <hidlmemory/mapping.h>
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+
+namespace generated_tests {
+using ::test_helper::MixedTypedExample;
+extern void Execute(const sp<V1_2::IDevice>&, std::function<V1_2::Model(void)>,
+                    std::function<bool(int)>, const std::vector<MixedTypedExample>&);
+}  // namespace generated_tests
+
+namespace V1_2 {
+namespace vts {
+namespace functional {
+
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
+using ::android::nn::allocateSharedMemory;
+using ::test_helper::MixedTypedExample;
+
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples);
+
+// in frameworks/ml/nn/runtime/tests/generated/
+#include "all_generated_V1_1_vts_tests.cpp"
+
+}  // namespace functional
+}  // namespace vts
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
diff --git a/neuralnetworks/1.2/vts/functional/ValidateModel.cpp b/neuralnetworks/1.2/vts/functional/ValidateModel.cpp
new file mode 100644
index 0000000..8f6d54f
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/ValidateModel.cpp
@@ -0,0 +1,659 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+#include "Callbacks.h"
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+namespace V1_2 {
+
+using V1_0::OperandLifeTime;
+using V1_1::ExecutionPreference;
+
+namespace vts {
+namespace functional {
+
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
+
+///////////////////////// UTILITY FUNCTIONS /////////////////////////
+
+static void validateGetSupportedOperations(const sp<IDevice>& device, const std::string& message,
+                                           const Model& model) {
+    SCOPED_TRACE(message + " [getSupportedOperations_1_2]");
+
+    Return<void> ret =
+        device->getSupportedOperations_1_2(model, [&](ErrorStatus status, const hidl_vec<bool>&) {
+            EXPECT_EQ(ErrorStatus::INVALID_ARGUMENT, status);
+        });
+    EXPECT_TRUE(ret.isOk());
+}
+
+static void validatePrepareModel(const sp<IDevice>& device, const std::string& message,
+                                 const Model& model, ExecutionPreference preference) {
+    SCOPED_TRACE(message + " [prepareModel_1_2]");
+
+    sp<PreparedModelCallback> preparedModelCallback = new PreparedModelCallback();
+    ASSERT_NE(nullptr, preparedModelCallback.get());
+    Return<ErrorStatus> prepareLaunchStatus =
+        device->prepareModel_1_2(model, preference, preparedModelCallback);
+    ASSERT_TRUE(prepareLaunchStatus.isOk());
+    ASSERT_EQ(ErrorStatus::INVALID_ARGUMENT, static_cast<ErrorStatus>(prepareLaunchStatus));
+
+    preparedModelCallback->wait();
+    ErrorStatus prepareReturnStatus = preparedModelCallback->getStatus();
+    ASSERT_EQ(ErrorStatus::INVALID_ARGUMENT, prepareReturnStatus);
+    sp<IPreparedModel> preparedModel = getPreparedModel_1_2(preparedModelCallback);
+    ASSERT_EQ(nullptr, preparedModel.get());
+}
+
+static bool validExecutionPreference(ExecutionPreference preference) {
+    return preference == ExecutionPreference::LOW_POWER ||
+           preference == ExecutionPreference::FAST_SINGLE_ANSWER ||
+           preference == ExecutionPreference::SUSTAINED_SPEED;
+}
+
+// Primary validation function. This function will take a valid model, apply a
+// mutation to it to invalidate the model, then pass it to interface calls that
+// use the model. Note that the model here is passed by value, and any mutation
+// to the model does not leave this function.
+static void validate(const sp<IDevice>& device, const std::string& message, Model model,
+                     const std::function<void(Model*)>& mutation,
+                     ExecutionPreference preference = ExecutionPreference::FAST_SINGLE_ANSWER) {
+    mutation(&model);
+    if (validExecutionPreference(preference)) {
+        validateGetSupportedOperations(device, message, model);
+    }
+    validatePrepareModel(device, message, model, preference);
+}
+
+// Delete element from hidl_vec. hidl_vec doesn't support a "remove" operation,
+// so this is efficiently accomplished by moving the element to the end and
+// resizing the hidl_vec to one less.
+template <typename Type>
+static void hidl_vec_removeAt(hidl_vec<Type>* vec, uint32_t index) {
+    if (vec) {
+        std::rotate(vec->begin() + index, vec->begin() + index + 1, vec->end());
+        vec->resize(vec->size() - 1);
+    }
+}
+
+template <typename Type>
+static uint32_t hidl_vec_push_back(hidl_vec<Type>* vec, const Type& value) {
+    // assume vec is valid
+    const uint32_t index = vec->size();
+    vec->resize(index + 1);
+    (*vec)[index] = value;
+    return index;
+}
+
+static uint32_t addOperand(Model* model) {
+    return hidl_vec_push_back(&model->operands,
+                              {
+                                  .type = OperandType::INT32,
+                                  .dimensions = {},
+                                  .numberOfConsumers = 0,
+                                  .scale = 0.0f,
+                                  .zeroPoint = 0,
+                                  .lifetime = OperandLifeTime::MODEL_INPUT,
+                                  .location = {.poolIndex = 0, .offset = 0, .length = 0},
+                              });
+}
+
+static uint32_t addOperand(Model* model, OperandLifeTime lifetime) {
+    uint32_t index = addOperand(model);
+    model->operands[index].numberOfConsumers = 1;
+    model->operands[index].lifetime = lifetime;
+    return index;
+}
+
+///////////////////////// VALIDATE MODEL OPERAND TYPE /////////////////////////
+
+static const uint32_t invalidOperandTypes[] = {
+    static_cast<uint32_t>(OperandTypeRange::OPERAND_FUNDAMENTAL_MIN) - 1,
+    static_cast<uint32_t>(OperandTypeRange::OPERAND_FUNDAMENTAL_MAX) + 1,
+    static_cast<uint32_t>(OperandTypeRange::OPERAND_OEM_MIN) - 1,
+    static_cast<uint32_t>(OperandTypeRange::OPERAND_OEM_MAX) + 1,
+};
+
+static void mutateOperandTypeTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operand = 0; operand < model.operands.size(); ++operand) {
+        for (uint32_t invalidOperandType : invalidOperandTypes) {
+            const std::string message = "mutateOperandTypeTest: operand " +
+                                        std::to_string(operand) + " set to value " +
+                                        std::to_string(invalidOperandType);
+            validate(device, message, model, [operand, invalidOperandType](Model* model) {
+                model->operands[operand].type = static_cast<OperandType>(invalidOperandType);
+            });
+        }
+    }
+}
+
+///////////////////////// VALIDATE OPERAND RANK /////////////////////////
+
+static uint32_t getInvalidRank(OperandType type) {
+    switch (type) {
+        case OperandType::FLOAT16:
+        case OperandType::FLOAT32:
+        case OperandType::INT32:
+        case OperandType::UINT32:
+        case OperandType::BOOL:
+            return 1;
+        case OperandType::TENSOR_FLOAT16:
+        case OperandType::TENSOR_FLOAT32:
+        case OperandType::TENSOR_INT32:
+        case OperandType::TENSOR_QUANT8_ASYMM:
+        case OperandType::TENSOR_QUANT16_SYMM:
+            return 0;
+        default:
+            return 0;
+    }
+}
+
+static void mutateOperandRankTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operand = 0; operand < model.operands.size(); ++operand) {
+        const uint32_t invalidRank = getInvalidRank(model.operands[operand].type);
+        const std::string message = "mutateOperandRankTest: operand " + std::to_string(operand) +
+                                    " has rank of " + std::to_string(invalidRank);
+        validate(device, message, model, [operand, invalidRank](Model* model) {
+            model->operands[operand].dimensions = std::vector<uint32_t>(invalidRank, 0);
+        });
+    }
+}
+
+///////////////////////// VALIDATE OPERAND SCALE /////////////////////////
+
+static float getInvalidScale(OperandType type) {
+    switch (type) {
+        case OperandType::FLOAT16:
+        case OperandType::FLOAT32:
+        case OperandType::INT32:
+        case OperandType::UINT32:
+        case OperandType::BOOL:
+        case OperandType::TENSOR_FLOAT16:
+        case OperandType::TENSOR_FLOAT32:
+            return 1.0f;
+        case OperandType::TENSOR_INT32:
+            return -1.0f;
+        case OperandType::TENSOR_QUANT8_ASYMM:
+        case OperandType::TENSOR_QUANT16_SYMM:
+            return 0.0f;
+        default:
+            return 0.0f;
+    }
+}
+
+static void mutateOperandScaleTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operand = 0; operand < model.operands.size(); ++operand) {
+        const float invalidScale = getInvalidScale(model.operands[operand].type);
+        const std::string message = "mutateOperandScaleTest: operand " + std::to_string(operand) +
+                                    " has scale of " + std::to_string(invalidScale);
+        validate(device, message, model, [operand, invalidScale](Model* model) {
+            model->operands[operand].scale = invalidScale;
+        });
+    }
+}
+
+///////////////////////// VALIDATE OPERAND ZERO POINT /////////////////////////
+
+static std::vector<int32_t> getInvalidZeroPoints(OperandType type) {
+    switch (type) {
+        case OperandType::FLOAT16:
+        case OperandType::FLOAT32:
+        case OperandType::INT32:
+        case OperandType::UINT32:
+        case OperandType::BOOL:
+        case OperandType::TENSOR_FLOAT16:
+        case OperandType::TENSOR_FLOAT32:
+        case OperandType::TENSOR_INT32:
+            return {1};
+        case OperandType::TENSOR_QUANT8_ASYMM:
+            return {-1, 256};
+        case OperandType::TENSOR_QUANT16_SYMM:
+            return {-32769, -1, 1, 32768};
+        default:
+            return {};
+    }
+}
+
+static void mutateOperandZeroPointTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operand = 0; operand < model.operands.size(); ++operand) {
+        const std::vector<int32_t> invalidZeroPoints =
+            getInvalidZeroPoints(model.operands[operand].type);
+        for (int32_t invalidZeroPoint : invalidZeroPoints) {
+            const std::string message = "mutateOperandZeroPointTest: operand " +
+                                        std::to_string(operand) + " has zero point of " +
+                                        std::to_string(invalidZeroPoint);
+            validate(device, message, model, [operand, invalidZeroPoint](Model* model) {
+                model->operands[operand].zeroPoint = invalidZeroPoint;
+            });
+        }
+    }
+}
+
+///////////////////////// VALIDATE EXTRA ??? /////////////////////////
+
+// TODO: Operand::lifetime
+// TODO: Operand::location
+
+///////////////////////// VALIDATE OPERATION OPERAND TYPE /////////////////////////
+
+static void mutateOperand(Operand* operand, OperandType type) {
+    Operand newOperand = *operand;
+    newOperand.type = type;
+    switch (type) {
+        case OperandType::FLOAT16:
+        case OperandType::FLOAT32:
+        case OperandType::INT32:
+        case OperandType::UINT32:
+        case OperandType::BOOL:
+            newOperand.dimensions = hidl_vec<uint32_t>();
+            newOperand.scale = 0.0f;
+            newOperand.zeroPoint = 0;
+            break;
+        case OperandType::TENSOR_FLOAT16:
+        case OperandType::TENSOR_FLOAT32:
+            newOperand.dimensions =
+                operand->dimensions.size() > 0 ? operand->dimensions : hidl_vec<uint32_t>({1});
+            newOperand.scale = 0.0f;
+            newOperand.zeroPoint = 0;
+            break;
+        case OperandType::TENSOR_INT32:
+            newOperand.dimensions =
+                operand->dimensions.size() > 0 ? operand->dimensions : hidl_vec<uint32_t>({1});
+            newOperand.zeroPoint = 0;
+            break;
+        case OperandType::TENSOR_QUANT8_ASYMM:
+        case OperandType::TENSOR_QUANT16_SYMM:
+            newOperand.dimensions =
+                operand->dimensions.size() > 0 ? operand->dimensions : hidl_vec<uint32_t>({1});
+            newOperand.scale = operand->scale != 0.0f ? operand->scale : 1.0f;
+            break;
+        case OperandType::OEM:
+        case OperandType::TENSOR_OEM_BYTE:
+        default:
+            break;
+    }
+    *operand = newOperand;
+}
+
+static bool mutateOperationOperandTypeSkip(size_t operand, OperandType type, const Model& model) {
+    // Do not test OEM types
+    if (type == model.operands[operand].type || type == OperandType::OEM ||
+        type == OperandType::TENSOR_OEM_BYTE) {
+        return true;
+    }
+    for (const Operation& operation : model.operations) {
+        // Skip mutateOperationOperandTypeTest for the following operations.
+        // - LSH_PROJECTION's second argument is allowed to have any type.
+        // - ARGMIN and ARGMAX's first argument can be any of
+        // TENSOR_(FLOAT16|FLOAT32|INT32|QUANT8_ASYMM).
+        // - CAST's argument can be any of TENSOR_(FLOAT16|FLOAT32|INT32|QUANT8_ASYMM).
+        switch (operation.type) {
+            case OperationType::LSH_PROJECTION: {
+                if (operand == operation.inputs[1]) {
+                    return true;
+                }
+            } break;
+            case OperationType::CAST:
+            case OperationType::ARGMAX:
+            case OperationType::ARGMIN: {
+                if (type == OperandType::TENSOR_FLOAT16 || type == OperandType::TENSOR_FLOAT32 ||
+                    type == OperandType::TENSOR_INT32 || type == OperandType::TENSOR_QUANT8_ASYMM) {
+                    return true;
+                }
+            } break;
+            default:
+                break;
+        }
+    }
+    return false;
+}
+
+static void mutateOperationOperandTypeTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operand = 0; operand < model.operands.size(); ++operand) {
+        for (OperandType invalidOperandType : hidl_enum_range<OperandType>{}) {
+            if (mutateOperationOperandTypeSkip(operand, invalidOperandType, model)) {
+                continue;
+            }
+            const std::string message = "mutateOperationOperandTypeTest: operand " +
+                                        std::to_string(operand) + " set to type " +
+                                        toString(invalidOperandType);
+            validate(device, message, model, [operand, invalidOperandType](Model* model) {
+                mutateOperand(&model->operands[operand], invalidOperandType);
+            });
+        }
+    }
+}
+
+///////////////////////// VALIDATE MODEL OPERATION TYPE /////////////////////////
+
+static const uint32_t invalidOperationTypes[] = {
+    static_cast<uint32_t>(OperationTypeRange::OPERATION_FUNDAMENTAL_MIN) - 1,
+    static_cast<uint32_t>(OperationTypeRange::OPERATION_FUNDAMENTAL_MAX) + 1,
+    static_cast<uint32_t>(OperationTypeRange::OPERATION_OEM_MIN) - 1,
+    static_cast<uint32_t>(OperationTypeRange::OPERATION_OEM_MAX) + 1,
+};
+
+static void mutateOperationTypeTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        for (uint32_t invalidOperationType : invalidOperationTypes) {
+            const std::string message = "mutateOperationTypeTest: operation " +
+                                        std::to_string(operation) + " set to value " +
+                                        std::to_string(invalidOperationType);
+            validate(device, message, model, [operation, invalidOperationType](Model* model) {
+                model->operations[operation].type =
+                    static_cast<OperationType>(invalidOperationType);
+            });
+        }
+    }
+}
+
+///////////////////////// VALIDATE MODEL OPERATION INPUT OPERAND INDEX /////////////////////////
+
+static void mutateOperationInputOperandIndexTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        const uint32_t invalidOperand = model.operands.size();
+        for (size_t input = 0; input < model.operations[operation].inputs.size(); ++input) {
+            const std::string message = "mutateOperationInputOperandIndexTest: operation " +
+                                        std::to_string(operation) + " input " +
+                                        std::to_string(input);
+            validate(device, message, model, [operation, input, invalidOperand](Model* model) {
+                model->operations[operation].inputs[input] = invalidOperand;
+            });
+        }
+    }
+}
+
+///////////////////////// VALIDATE MODEL OPERATION OUTPUT OPERAND INDEX /////////////////////////
+
+static void mutateOperationOutputOperandIndexTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        const uint32_t invalidOperand = model.operands.size();
+        for (size_t output = 0; output < model.operations[operation].outputs.size(); ++output) {
+            const std::string message = "mutateOperationOutputOperandIndexTest: operation " +
+                                        std::to_string(operation) + " output " +
+                                        std::to_string(output);
+            validate(device, message, model, [operation, output, invalidOperand](Model* model) {
+                model->operations[operation].outputs[output] = invalidOperand;
+            });
+        }
+    }
+}
+
+///////////////////////// REMOVE OPERAND FROM EVERYTHING /////////////////////////
+
+static void removeValueAndDecrementGreaterValues(hidl_vec<uint32_t>* vec, uint32_t value) {
+    if (vec) {
+        // remove elements matching "value"
+        auto last = std::remove(vec->begin(), vec->end(), value);
+        vec->resize(std::distance(vec->begin(), last));
+
+        // decrement elements exceeding "value"
+        std::transform(vec->begin(), vec->end(), vec->begin(),
+                       [value](uint32_t v) { return v > value ? v-- : v; });
+    }
+}
+
+static void removeOperand(Model* model, uint32_t index) {
+    hidl_vec_removeAt(&model->operands, index);
+    for (Operation& operation : model->operations) {
+        removeValueAndDecrementGreaterValues(&operation.inputs, index);
+        removeValueAndDecrementGreaterValues(&operation.outputs, index);
+    }
+    removeValueAndDecrementGreaterValues(&model->inputIndexes, index);
+    removeValueAndDecrementGreaterValues(&model->outputIndexes, index);
+}
+
+static bool removeOperandSkip(size_t operand, const Model& model) {
+    for (const Operation& operation : model.operations) {
+        // Skip removeOperandTest for the following operations.
+        // - SPLIT's outputs are not checked during prepareModel.
+        if (operation.type == OperationType::SPLIT) {
+            for (const size_t outOprand : operation.outputs) {
+                if (operand == outOprand) {
+                    return true;
+                }
+            }
+        }
+    }
+    return false;
+}
+
+static void removeOperandTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operand = 0; operand < model.operands.size(); ++operand) {
+        if (removeOperandSkip(operand, model)) {
+            continue;
+        }
+        const std::string message = "removeOperandTest: operand " + std::to_string(operand);
+        validate(device, message, model,
+                 [operand](Model* model) { removeOperand(model, operand); });
+    }
+}
+
+///////////////////////// REMOVE OPERATION /////////////////////////
+
+static void removeOperation(Model* model, uint32_t index) {
+    for (uint32_t operand : model->operations[index].inputs) {
+        model->operands[operand].numberOfConsumers--;
+    }
+    hidl_vec_removeAt(&model->operations, index);
+}
+
+static void removeOperationTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        const std::string message = "removeOperationTest: operation " + std::to_string(operation);
+        validate(device, message, model,
+                 [operation](Model* model) { removeOperation(model, operation); });
+    }
+}
+
+///////////////////////// REMOVE OPERATION INPUT /////////////////////////
+
+static bool removeOperationInputSkip(const Operation& op, size_t input) {
+    // Skip removeOperationInputTest for the following operations.
+    // - CONCATENATION has at least 2 inputs, with the last element being INT32.
+    // - CONV_2D, DEPTHWISE_CONV_2D, MAX_POOL_2D, AVERAGE_POOL_2D, L2_POOL_2D, RESIZE_BILINEAR,
+    //   SPACE_TO_DEPTH, SPACE_TO_DEPTH, SPACE_TO_BATCH_ND, BATCH_TO_SPACE_ND can have an optional
+    //   layout parameter.
+    // - L2_NORMALIZATION, LOCAL_RESPONSE_NORMALIZATION, SOFTMAX can have an optional axis
+    //   parameter.
+    switch (op.type) {
+        case OperationType::CONCATENATION: {
+            if (op.inputs.size() > 2 && input != op.inputs.size() - 1) {
+                return true;
+            }
+        } break;
+        case OperationType::DEPTHWISE_CONV_2D: {
+            if ((op.inputs.size() == 12 && input == 11) || (op.inputs.size() == 9 && input == 8)) {
+                return true;
+            }
+        } break;
+        case OperationType::CONV_2D:
+        case OperationType::AVERAGE_POOL_2D:
+        case OperationType::MAX_POOL_2D:
+        case OperationType::L2_POOL_2D: {
+            if ((op.inputs.size() == 11 && input == 10) || (op.inputs.size() == 8 && input == 7)) {
+                return true;
+            }
+        } break;
+        case OperationType::RESIZE_BILINEAR: {
+            if (op.inputs.size() == 4 && input == 3) {
+                return true;
+            }
+        } break;
+        case OperationType::SPACE_TO_DEPTH:
+        case OperationType::DEPTH_TO_SPACE:
+        case OperationType::BATCH_TO_SPACE_ND: {
+            if (op.inputs.size() == 3 && input == 2) {
+                return true;
+            }
+        } break;
+        case OperationType::SPACE_TO_BATCH_ND: {
+            if (op.inputs.size() == 4 && input == 3) {
+                return true;
+            }
+        } break;
+        case OperationType::L2_NORMALIZATION: {
+            if (op.inputs.size() == 2 && input == 1) {
+                return true;
+            }
+        } break;
+        case OperationType::LOCAL_RESPONSE_NORMALIZATION: {
+            if (op.inputs.size() == 6 && input == 5) {
+                return true;
+            }
+        } break;
+        case OperationType::SOFTMAX: {
+            if (op.inputs.size() == 3 && input == 2) {
+                return true;
+            }
+        } break;
+        default:
+            break;
+    }
+    return false;
+}
+
+static void removeOperationInputTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        for (size_t input = 0; input < model.operations[operation].inputs.size(); ++input) {
+            const Operation& op = model.operations[operation];
+            if (removeOperationInputSkip(op, input)) {
+                continue;
+            }
+            const std::string message = "removeOperationInputTest: operation " +
+                                        std::to_string(operation) + ", input " +
+                                        std::to_string(input);
+            validate(device, message, model, [operation, input](Model* model) {
+                uint32_t operand = model->operations[operation].inputs[input];
+                model->operands[operand].numberOfConsumers--;
+                hidl_vec_removeAt(&model->operations[operation].inputs, input);
+            });
+        }
+    }
+}
+
+///////////////////////// REMOVE OPERATION OUTPUT /////////////////////////
+
+static void removeOperationOutputTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        for (size_t output = 0; output < model.operations[operation].outputs.size(); ++output) {
+            const std::string message = "removeOperationOutputTest: operation " +
+                                        std::to_string(operation) + ", output " +
+                                        std::to_string(output);
+            validate(device, message, model, [operation, output](Model* model) {
+                hidl_vec_removeAt(&model->operations[operation].outputs, output);
+            });
+        }
+    }
+}
+
+///////////////////////// MODEL VALIDATION /////////////////////////
+
+// TODO: remove model input
+// TODO: remove model output
+// TODO: add unused operation
+
+///////////////////////// ADD OPERATION INPUT /////////////////////////
+
+static bool addOperationInputSkip(const Operation& op) {
+    // Skip addOperationInputTest for the following operations.
+    // - L2_NORMALIZATION, LOCAL_RESPONSE_NORMALIZATION, SOFTMAX can have an optional INT32 axis
+    //   parameter.
+    if ((op.type == OperationType::L2_NORMALIZATION && op.inputs.size() == 1) ||
+        (op.type == OperationType::LOCAL_RESPONSE_NORMALIZATION && op.inputs.size() == 5) ||
+        (op.type == OperationType::SOFTMAX && op.inputs.size() == 2)) {
+        return true;
+    }
+    return false;
+}
+
+static void addOperationInputTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        if (addOperationInputSkip(model.operations[operation])) {
+            continue;
+        }
+        const std::string message = "addOperationInputTest: operation " + std::to_string(operation);
+        validate(device, message, model, [operation](Model* model) {
+            uint32_t index = addOperand(model, OperandLifeTime::MODEL_INPUT);
+            hidl_vec_push_back(&model->operations[operation].inputs, index);
+            hidl_vec_push_back(&model->inputIndexes, index);
+        });
+    }
+}
+
+///////////////////////// ADD OPERATION OUTPUT /////////////////////////
+
+static void addOperationOutputTest(const sp<IDevice>& device, const Model& model) {
+    for (size_t operation = 0; operation < model.operations.size(); ++operation) {
+        const std::string message =
+            "addOperationOutputTest: operation " + std::to_string(operation);
+        validate(device, message, model, [operation](Model* model) {
+            uint32_t index = addOperand(model, OperandLifeTime::MODEL_OUTPUT);
+            hidl_vec_push_back(&model->operations[operation].outputs, index);
+            hidl_vec_push_back(&model->outputIndexes, index);
+        });
+    }
+}
+
+///////////////////////// VALIDATE EXECUTION PREFERENCE /////////////////////////
+
+static const int32_t invalidExecutionPreferences[] = {
+    static_cast<int32_t>(ExecutionPreference::LOW_POWER) - 1,        // lower bound
+    static_cast<int32_t>(ExecutionPreference::SUSTAINED_SPEED) + 1,  // upper bound
+};
+
+static void mutateExecutionPreferenceTest(const sp<IDevice>& device, const Model& model) {
+    for (int32_t preference : invalidExecutionPreferences) {
+        const std::string message =
+            "mutateExecutionPreferenceTest: preference " + std::to_string(preference);
+        validate(device, message, model, [](Model*) {},
+                 static_cast<ExecutionPreference>(preference));
+    }
+}
+
+////////////////////////// ENTRY POINT //////////////////////////////
+
+void ValidationTest::validateModel(const Model& model) {
+    mutateOperandTypeTest(device, model);
+    mutateOperandRankTest(device, model);
+    mutateOperandScaleTest(device, model);
+    mutateOperandZeroPointTest(device, model);
+    mutateOperationOperandTypeTest(device, model);
+    mutateOperationTypeTest(device, model);
+    mutateOperationInputOperandIndexTest(device, model);
+    mutateOperationOutputOperandIndexTest(device, model);
+    removeOperandTest(device, model);
+    removeOperationTest(device, model);
+    removeOperationInputTest(device, model);
+    removeOperationOutputTest(device, model);
+    addOperationInputTest(device, model);
+    addOperationOutputTest(device, model);
+    mutateExecutionPreferenceTest(device, model);
+}
+
+}  // namespace functional
+}  // namespace vts
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
diff --git a/neuralnetworks/1.2/vts/functional/ValidateRequest.cpp b/neuralnetworks/1.2/vts/functional/ValidateRequest.cpp
new file mode 100644
index 0000000..d80fbcf
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/ValidateRequest.cpp
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+#include "Callbacks.h"
+#include "TestHarness.h"
+#include "Utils.h"
+
+#include <android-base/logging.h>
+#include <android/hidl/memory/1.0/IMemory.h>
+#include <hidlmemory/mapping.h>
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+namespace V1_2 {
+namespace vts {
+namespace functional {
+
+using ::android::hardware::neuralnetworks::V1_2::implementation::ExecutionCallback;
+using ::android::hardware::neuralnetworks::V1_2::implementation::PreparedModelCallback;
+using ::android::hidl::memory::V1_0::IMemory;
+using test_helper::for_all;
+using test_helper::MixedTyped;
+using test_helper::MixedTypedExample;
+
+///////////////////////// UTILITY FUNCTIONS /////////////////////////
+
+static void createPreparedModel(const sp<IDevice>& device, const Model& model,
+                                sp<IPreparedModel>* preparedModel) {
+    ASSERT_NE(nullptr, preparedModel);
+
+    // see if service can handle model
+    bool fullySupportsModel = false;
+    Return<void> supportedOpsLaunchStatus = device->getSupportedOperations_1_2(
+        model, [&fullySupportsModel](ErrorStatus status, const hidl_vec<bool>& supported) {
+            ASSERT_EQ(ErrorStatus::NONE, status);
+            ASSERT_NE(0ul, supported.size());
+            fullySupportsModel =
+                std::all_of(supported.begin(), supported.end(), [](bool valid) { return valid; });
+        });
+    ASSERT_TRUE(supportedOpsLaunchStatus.isOk());
+
+    // launch prepare model
+    sp<PreparedModelCallback> preparedModelCallback = new PreparedModelCallback();
+    ASSERT_NE(nullptr, preparedModelCallback.get());
+    Return<ErrorStatus> prepareLaunchStatus = device->prepareModel_1_2(
+        model, ExecutionPreference::FAST_SINGLE_ANSWER, preparedModelCallback);
+    ASSERT_TRUE(prepareLaunchStatus.isOk());
+    ASSERT_EQ(ErrorStatus::NONE, static_cast<ErrorStatus>(prepareLaunchStatus));
+
+    // retrieve prepared model
+    preparedModelCallback->wait();
+    ErrorStatus prepareReturnStatus = preparedModelCallback->getStatus();
+    *preparedModel = getPreparedModel_1_2(preparedModelCallback);
+
+    // The getSupportedOperations_1_2 call returns a list of operations that are
+    // guaranteed not to fail if prepareModel_1_2 is called, and
+    // 'fullySupportsModel' is true i.f.f. the entire model is guaranteed.
+    // If a driver has any doubt that it can prepare an operation, it must
+    // return false. So here, if a driver isn't sure if it can support an
+    // operation, but reports that it successfully prepared the model, the test
+    // can continue.
+    if (!fullySupportsModel && prepareReturnStatus != ErrorStatus::NONE) {
+        ASSERT_EQ(nullptr, preparedModel->get());
+        LOG(INFO) << "NN VTS: Unable to test Request validation because vendor service cannot "
+                     "prepare model that it does not support.";
+        std::cout << "[          ]   Unable to test Request validation because vendor service "
+                     "cannot prepare model that it does not support."
+                  << std::endl;
+        return;
+    }
+    ASSERT_EQ(ErrorStatus::NONE, prepareReturnStatus);
+    ASSERT_NE(nullptr, preparedModel->get());
+}
+
+// Primary validation function. This function will take a valid request, apply a
+// mutation to it to invalidate the request, then pass it to interface calls
+// that use the request. Note that the request here is passed by value, and any
+// mutation to the request does not leave this function.
+static void validate(const sp<IPreparedModel>& preparedModel, const std::string& message,
+                     Request request, const std::function<void(Request*)>& mutation) {
+    mutation(&request);
+
+    {
+        SCOPED_TRACE(message + " [execute_1_2]");
+
+        sp<ExecutionCallback> executionCallback = new ExecutionCallback();
+        ASSERT_NE(nullptr, executionCallback.get());
+        Return<ErrorStatus> executeLaunchStatus =
+            preparedModel->execute_1_2(request, executionCallback);
+        ASSERT_TRUE(executeLaunchStatus.isOk());
+        ASSERT_EQ(ErrorStatus::INVALID_ARGUMENT, static_cast<ErrorStatus>(executeLaunchStatus));
+
+        executionCallback->wait();
+        ErrorStatus executionReturnStatus = executionCallback->getStatus();
+        ASSERT_EQ(ErrorStatus::INVALID_ARGUMENT, executionReturnStatus);
+    }
+
+    {
+        SCOPED_TRACE(message + " [executeSynchronously]");
+
+        Return<ErrorStatus> executeStatus = preparedModel->executeSynchronously(request);
+        ASSERT_TRUE(executeStatus.isOk());
+        ASSERT_EQ(ErrorStatus::INVALID_ARGUMENT, static_cast<ErrorStatus>(executeStatus));
+    }
+}
+
+// Delete element from hidl_vec. hidl_vec doesn't support a "remove" operation,
+// so this is efficiently accomplished by moving the element to the end and
+// resizing the hidl_vec to one less.
+template <typename Type>
+static void hidl_vec_removeAt(hidl_vec<Type>* vec, uint32_t index) {
+    if (vec) {
+        std::rotate(vec->begin() + index, vec->begin() + index + 1, vec->end());
+        vec->resize(vec->size() - 1);
+    }
+}
+
+template <typename Type>
+static uint32_t hidl_vec_push_back(hidl_vec<Type>* vec, const Type& value) {
+    // assume vec is valid
+    const uint32_t index = vec->size();
+    vec->resize(index + 1);
+    (*vec)[index] = value;
+    return index;
+}
+
+///////////////////////// REMOVE INPUT ////////////////////////////////////
+
+static void removeInputTest(const sp<IPreparedModel>& preparedModel, const Request& request) {
+    for (size_t input = 0; input < request.inputs.size(); ++input) {
+        const std::string message = "removeInput: removed input " + std::to_string(input);
+        validate(preparedModel, message, request,
+                 [input](Request* request) { hidl_vec_removeAt(&request->inputs, input); });
+    }
+}
+
+///////////////////////// REMOVE OUTPUT ////////////////////////////////////
+
+static void removeOutputTest(const sp<IPreparedModel>& preparedModel, const Request& request) {
+    for (size_t output = 0; output < request.outputs.size(); ++output) {
+        const std::string message = "removeOutput: removed Output " + std::to_string(output);
+        validate(preparedModel, message, request,
+                 [output](Request* request) { hidl_vec_removeAt(&request->outputs, output); });
+    }
+}
+
+///////////////////////////// ENTRY POINT //////////////////////////////////
+
+std::vector<Request> createRequests(const std::vector<MixedTypedExample>& examples) {
+    const uint32_t INPUT = 0;
+    const uint32_t OUTPUT = 1;
+
+    std::vector<Request> requests;
+
+    for (auto& example : examples) {
+        const MixedTyped& inputs = example.operands.first;
+        const MixedTyped& outputs = example.operands.second;
+
+        std::vector<RequestArgument> inputs_info, outputs_info;
+        uint32_t inputSize = 0, outputSize = 0;
+
+        // This function only partially specifies the metadata (vector of RequestArguments).
+        // The contents are copied over below.
+        for_all(inputs, [&inputs_info, &inputSize](int index, auto, auto s) {
+            if (inputs_info.size() <= static_cast<size_t>(index)) inputs_info.resize(index + 1);
+            RequestArgument arg = {
+                .location = {.poolIndex = INPUT, .offset = 0, .length = static_cast<uint32_t>(s)},
+                .dimensions = {},
+            };
+            RequestArgument arg_empty = {
+                .hasNoValue = true,
+            };
+            inputs_info[index] = s ? arg : arg_empty;
+            inputSize += s;
+        });
+        // Compute offset for inputs 1 and so on
+        {
+            size_t offset = 0;
+            for (auto& i : inputs_info) {
+                if (!i.hasNoValue) i.location.offset = offset;
+                offset += i.location.length;
+            }
+        }
+
+        // Go through all outputs, initialize RequestArgument descriptors
+        for_all(outputs, [&outputs_info, &outputSize](int index, auto, auto s) {
+            if (outputs_info.size() <= static_cast<size_t>(index)) outputs_info.resize(index + 1);
+            RequestArgument arg = {
+                .location = {.poolIndex = OUTPUT, .offset = 0, .length = static_cast<uint32_t>(s)},
+                .dimensions = {},
+            };
+            outputs_info[index] = arg;
+            outputSize += s;
+        });
+        // Compute offset for outputs 1 and so on
+        {
+            size_t offset = 0;
+            for (auto& i : outputs_info) {
+                i.location.offset = offset;
+                offset += i.location.length;
+            }
+        }
+        std::vector<hidl_memory> pools = {nn::allocateSharedMemory(inputSize),
+                                          nn::allocateSharedMemory(outputSize)};
+        if (pools[INPUT].size() == 0 || pools[OUTPUT].size() == 0) {
+            return {};
+        }
+
+        // map pool
+        sp<IMemory> inputMemory = mapMemory(pools[INPUT]);
+        if (inputMemory == nullptr) {
+            return {};
+        }
+        char* inputPtr = reinterpret_cast<char*>(static_cast<void*>(inputMemory->getPointer()));
+        if (inputPtr == nullptr) {
+            return {};
+        }
+
+        // initialize pool
+        inputMemory->update();
+        for_all(inputs, [&inputs_info, inputPtr](int index, auto p, auto s) {
+            char* begin = (char*)p;
+            char* end = begin + s;
+            // TODO: handle more than one input
+            std::copy(begin, end, inputPtr + inputs_info[index].location.offset);
+        });
+        inputMemory->commit();
+
+        requests.push_back({.inputs = inputs_info, .outputs = outputs_info, .pools = pools});
+    }
+
+    return requests;
+}
+
+void ValidationTest::validateRequests(const Model& model, const std::vector<Request>& requests) {
+    // create IPreparedModel
+    sp<IPreparedModel> preparedModel;
+    ASSERT_NO_FATAL_FAILURE(createPreparedModel(device, model, &preparedModel));
+    if (preparedModel == nullptr) {
+        return;
+    }
+
+    // validate each request
+    for (const Request& request : requests) {
+        removeInputTest(preparedModel, request);
+        removeOutputTest(preparedModel, request);
+    }
+}
+
+}  // namespace functional
+}  // namespace vts
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
diff --git a/neuralnetworks/1.2/vts/functional/VtsHalNeuralnetworks.cpp b/neuralnetworks/1.2/vts/functional/VtsHalNeuralnetworks.cpp
new file mode 100644
index 0000000..4eced82
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/VtsHalNeuralnetworks.cpp
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "neuralnetworks_hidl_hal_test"
+
+#include "VtsHalNeuralnetworks.h"
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+namespace V1_2 {
+namespace vts {
+namespace functional {
+
+// A class for test environment setup
+NeuralnetworksHidlEnvironment::NeuralnetworksHidlEnvironment() {}
+
+NeuralnetworksHidlEnvironment::~NeuralnetworksHidlEnvironment() {}
+
+NeuralnetworksHidlEnvironment* NeuralnetworksHidlEnvironment::getInstance() {
+    // This has to return a "new" object because it is freed inside
+    // ::testing::AddGlobalTestEnvironment when the gtest is being torn down
+    static NeuralnetworksHidlEnvironment* instance = new NeuralnetworksHidlEnvironment();
+    return instance;
+}
+
+void NeuralnetworksHidlEnvironment::registerTestServices() {
+    registerTestService<IDevice>();
+}
+
+// The main test class for NEURALNETWORK HIDL HAL.
+NeuralnetworksHidlTest::NeuralnetworksHidlTest() {}
+
+NeuralnetworksHidlTest::~NeuralnetworksHidlTest() {}
+
+void NeuralnetworksHidlTest::SetUp() {
+    ::testing::VtsHalHidlTargetTestBase::SetUp();
+    device = ::testing::VtsHalHidlTargetTestBase::getService<IDevice>(
+        NeuralnetworksHidlEnvironment::getInstance());
+    ASSERT_NE(nullptr, device.get());
+}
+
+void NeuralnetworksHidlTest::TearDown() {
+    device = nullptr;
+    ::testing::VtsHalHidlTargetTestBase::TearDown();
+}
+
+sp<IPreparedModel> getPreparedModel_1_2(
+    const sp<V1_2::implementation::PreparedModelCallback>& callback) {
+    sp<V1_0::IPreparedModel> preparedModelV1_0 = callback->getPreparedModel();
+    return V1_2::IPreparedModel::castFrom(preparedModelV1_0).withDefault(nullptr);
+}
+
+}  // namespace functional
+}  // namespace vts
+
+::std::ostream& operator<<(::std::ostream& os, ErrorStatus errorStatus) {
+    return os << toString(errorStatus);
+}
+
+::std::ostream& operator<<(::std::ostream& os, DeviceStatus deviceStatus) {
+    return os << toString(deviceStatus);
+}
+
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
+
+using android::hardware::neuralnetworks::V1_2::vts::functional::NeuralnetworksHidlEnvironment;
+
+int main(int argc, char** argv) {
+    ::testing::AddGlobalTestEnvironment(NeuralnetworksHidlEnvironment::getInstance());
+    ::testing::InitGoogleTest(&argc, argv);
+    NeuralnetworksHidlEnvironment::getInstance()->init(&argc, argv);
+
+    int status = RUN_ALL_TESTS();
+    return status;
+}
diff --git a/neuralnetworks/1.2/vts/functional/VtsHalNeuralnetworks.h b/neuralnetworks/1.2/vts/functional/VtsHalNeuralnetworks.h
new file mode 100644
index 0000000..dedab8d
--- /dev/null
+++ b/neuralnetworks/1.2/vts/functional/VtsHalNeuralnetworks.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef VTS_HAL_NEURALNETWORKS_V1_2_H
+#define VTS_HAL_NEURALNETWORKS_V1_2_H
+
+#include "Callbacks.h"
+
+#include <android/hardware/neuralnetworks/1.0/types.h>
+#include <android/hardware/neuralnetworks/1.1/types.h>
+#include <android/hardware/neuralnetworks/1.2/IDevice.h>
+#include <android/hardware/neuralnetworks/1.2/types.h>
+
+#include <VtsHalHidlTargetTestBase.h>
+#include <VtsHalHidlTargetTestEnvBase.h>
+
+#include <android-base/macros.h>
+#include <gtest/gtest.h>
+#include <iostream>
+#include <vector>
+
+namespace android {
+namespace hardware {
+namespace neuralnetworks {
+namespace V1_2 {
+
+using V1_0::DeviceStatus;
+using V1_0::ErrorStatus;
+using V1_0::Request;
+
+namespace vts {
+namespace functional {
+
+// A class for test environment setup
+class NeuralnetworksHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
+    DISALLOW_COPY_AND_ASSIGN(NeuralnetworksHidlEnvironment);
+    NeuralnetworksHidlEnvironment();
+    ~NeuralnetworksHidlEnvironment() override;
+
+   public:
+    static NeuralnetworksHidlEnvironment* getInstance();
+    void registerTestServices() override;
+};
+
+// The main test class for NEURALNETWORKS HIDL HAL.
+class NeuralnetworksHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+    DISALLOW_COPY_AND_ASSIGN(NeuralnetworksHidlTest);
+
+   public:
+    NeuralnetworksHidlTest();
+    ~NeuralnetworksHidlTest() override;
+    void SetUp() override;
+    void TearDown() override;
+
+   protected:
+    sp<IDevice> device;
+};
+
+// Tag for the validation tests
+class ValidationTest : public NeuralnetworksHidlTest {
+   protected:
+    void validateModel(const Model& model);
+    void validateRequests(const Model& model, const std::vector<Request>& request);
+};
+
+// Tag for the generated tests
+class GeneratedTest : public NeuralnetworksHidlTest {};
+
+// Utility function to get PreparedModel from callback and downcast to V1_2.
+sp<IPreparedModel> getPreparedModel_1_2(
+    const sp<V1_2::implementation::PreparedModelCallback>& callback);
+
+}  // namespace functional
+}  // namespace vts
+
+// pretty-print values for error messages
+::std::ostream& operator<<(::std::ostream& os, ErrorStatus errorStatus);
+::std::ostream& operator<<(::std::ostream& os, DeviceStatus deviceStatus);
+
+}  // namespace V1_2
+}  // namespace neuralnetworks
+}  // namespace hardware
+}  // namespace android
+
+#endif  // VTS_HAL_NEURALNETWORKS_V1_2_H
diff --git a/nfc/1.0/vts/functional/Android.bp b/nfc/1.0/vts/functional/Android.bp
index 3861bd4..c2e365e 100644
--- a/nfc/1.0/vts/functional/Android.bp
+++ b/nfc/1.0/vts/functional/Android.bp
@@ -21,4 +21,5 @@
     static_libs: [
         "android.hardware.nfc@1.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/nfc/1.1/vts/functional/Android.bp b/nfc/1.1/vts/functional/Android.bp
index 0ce531f..6698c5a 100644
--- a/nfc/1.1/vts/functional/Android.bp
+++ b/nfc/1.1/vts/functional/Android.bp
@@ -22,4 +22,5 @@
         "android.hardware.nfc@1.0",
         "android.hardware.nfc@1.1",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/nfc/1.2/Android.bp b/nfc/1.2/Android.bp
new file mode 100644
index 0000000..c338e02
--- /dev/null
+++ b/nfc/1.2/Android.bp
@@ -0,0 +1,23 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.nfc@1.2",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "INfc.hal",
+    ],
+    interfaces: [
+        "android.hardware.nfc@1.0",
+        "android.hardware.nfc@1.1",
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "NfcConfig",
+    ],
+    gen_java: true,
+}
+
diff --git a/nfc/1.2/INfc.hal b/nfc/1.2/INfc.hal
new file mode 100644
index 0000000..4788fd7
--- /dev/null
+++ b/nfc/1.2/INfc.hal
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2017 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.nfc@1.2;
+
+import @1.1::INfc;
+import @1.2::NfcConfig;
+
+interface INfc extends @1.1::INfc {
+    /**
+     * Fetches vendor specific configurations.
+     * @return config indicates support for certain features and
+     *     populates the vendor specific configs
+     */
+    getConfig_1_2() generates (NfcConfig config);
+};
diff --git a/nfc/1.2/types.hal b/nfc/1.2/types.hal
new file mode 100644
index 0000000..d6db9a8
--- /dev/null
+++ b/nfc/1.2/types.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2017 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.nfc@1.2;
+
+import @1.1::NfcConfig;
+
+struct NfcConfig {
+    @1.1::NfcConfig v1_1;
+
+    /*
+     * NFCEE ID for offhost UICC & eSE secure element.
+     * 0x00 if there aren't any. Refer NCI specification
+     */
+    vec<uint8_t> offHostRouteUicc;
+    vec<uint8_t> offHostRouteEse;
+
+    /** Default IsoDep route. 0x00 if there aren't any. Refer NCI spec */
+    uint8_t defaultIsoDepRoute;
+};
diff --git a/nfc/1.2/vts/functional/Android.bp b/nfc/1.2/vts/functional/Android.bp
new file mode 100644
index 0000000..13b254c
--- /dev/null
+++ b/nfc/1.2/vts/functional/Android.bp
@@ -0,0 +1,26 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_test {
+    name: "VtsHalNfcV1_2TargetTest",
+    defaults: ["VtsHalTargetTestDefaults"],
+    srcs: ["VtsHalNfcV1_2TargetTest.cpp"],
+    static_libs: [
+        "android.hardware.nfc@1.0",
+        "android.hardware.nfc@1.1",
+        "android.hardware.nfc@1.2",
+    ],
+}
diff --git a/nfc/1.2/vts/functional/VtsHalNfcV1_2TargetTest.cpp b/nfc/1.2/vts/functional/VtsHalNfcV1_2TargetTest.cpp
new file mode 100644
index 0000000..ee4a887
--- /dev/null
+++ b/nfc/1.2/vts/functional/VtsHalNfcV1_2TargetTest.cpp
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "nfc_hidl_hal_test"
+#include <android-base/logging.h>
+
+#include <android/hardware/nfc/1.1/INfcClientCallback.h>
+#include <android/hardware/nfc/1.2/INfc.h>
+#include <android/hardware/nfc/1.2/types.h>
+#include <hardware/nfc.h>
+
+#include <VtsHalHidlTargetCallbackBase.h>
+#include <VtsHalHidlTargetTestBase.h>
+#include <VtsHalHidlTargetTestEnvBase.h>
+
+using ::android::sp;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::nfc::V1_0::NfcData;
+using ::android::hardware::nfc::V1_0::NfcStatus;
+using ::android::hardware::nfc::V1_1::INfcClientCallback;
+using ::android::hardware::nfc::V1_1::NfcEvent;
+using ::android::hardware::nfc::V1_2::INfc;
+using ::android::hardware::nfc::V1_2::NfcConfig;
+
+// Range of valid off host route ids
+constexpr unsigned int MIN_OFFHOST_ROUTE_ID = 0x80;
+constexpr unsigned int MAX_OFFHOST_ROUTE_ID = 0xFE;
+
+constexpr char kCallbackNameSendEvent[] = "sendEvent";
+constexpr char kCallbackNameSendData[] = "sendData";
+
+class NfcClientCallbackArgs {
+   public:
+    NfcEvent last_event_;
+    NfcStatus last_status_;
+    NfcData last_data_;
+};
+
+/* Callback class for data & Event. */
+class NfcClientCallback : public ::testing::VtsHalHidlTargetCallbackBase<NfcClientCallbackArgs>,
+                          public INfcClientCallback {
+   public:
+    virtual ~NfcClientCallback() = default;
+
+    /* sendEvent callback function - Records the Event & Status
+     * and notifies the TEST
+     **/
+    Return<void> sendEvent_1_1(NfcEvent event, NfcStatus event_status) override {
+        NfcClientCallbackArgs args;
+        args.last_event_ = event;
+        args.last_status_ = event_status;
+        NotifyFromCallback(kCallbackNameSendEvent, args);
+        return Void();
+    };
+
+    /** NFC 1.1 HAL shouldn't send 1.0 callbacks */
+    Return<void> sendEvent(__attribute__((unused))::android::hardware::nfc::V1_0::NfcEvent event,
+                           __attribute__((unused)) NfcStatus event_status) override {
+        return Void();
+    }
+
+    /* sendData callback function. Records the data and notifies the TEST*/
+    Return<void> sendData(const NfcData& data) override {
+        NfcClientCallbackArgs args;
+        args.last_data_ = data;
+        NotifyFromCallback(kCallbackNameSendData, args);
+        return Void();
+    };
+};
+
+// Test environment for Nfc HIDL HAL.
+class NfcHidlEnvironment : public ::testing::VtsHalHidlTargetTestEnvBase {
+   public:
+    // get the test environment singleton
+    static NfcHidlEnvironment* Instance() {
+        static NfcHidlEnvironment* instance = new NfcHidlEnvironment;
+        return instance;
+    }
+
+    virtual void registerTestServices() override { registerTestService<INfc>(); }
+
+   private:
+    NfcHidlEnvironment() {}
+};
+
+// The main test class for NFC HIDL HAL.
+class NfcHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+   public:
+    virtual void SetUp() override {
+        nfc_ = ::testing::VtsHalHidlTargetTestBase::getService<INfc>();
+        ASSERT_NE(nfc_, nullptr);
+
+        nfc_cb_ = new NfcClientCallback();
+        ASSERT_NE(nfc_cb_, nullptr);
+
+        EXPECT_EQ(NfcStatus::OK, nfc_->open_1_1(nfc_cb_));
+        // Wait for OPEN_CPLT event
+        auto res = nfc_cb_->WaitForCallback(kCallbackNameSendEvent);
+        EXPECT_TRUE(res.no_timeout);
+        EXPECT_EQ(NfcEvent::OPEN_CPLT, res.args->last_event_);
+        EXPECT_EQ(NfcStatus::OK, res.args->last_status_);
+
+        /*
+         * Close the hal and then re-open to make sure we are in a predictable
+         * state for all the tests.
+         */
+        EXPECT_EQ(NfcStatus::OK, nfc_->close());
+        // Wait for CLOSE_CPLT event
+        res = nfc_cb_->WaitForCallback(kCallbackNameSendEvent);
+        EXPECT_TRUE(res.no_timeout);
+        EXPECT_EQ(NfcEvent::CLOSE_CPLT, res.args->last_event_);
+        EXPECT_EQ(NfcStatus::OK, res.args->last_status_);
+
+        EXPECT_EQ(NfcStatus::OK, nfc_->open_1_1(nfc_cb_));
+        // Wait for OPEN_CPLT event
+        res = nfc_cb_->WaitForCallback(kCallbackNameSendEvent);
+        EXPECT_TRUE(res.no_timeout);
+        EXPECT_EQ(NfcEvent::OPEN_CPLT, res.args->last_event_);
+        EXPECT_EQ(NfcStatus::OK, res.args->last_status_);
+    }
+
+    virtual void TearDown() override {
+        EXPECT_EQ(NfcStatus::OK, nfc_->close());
+        // Wait for CLOSE_CPLT event
+        auto res = nfc_cb_->WaitForCallback(kCallbackNameSendEvent);
+        EXPECT_TRUE(res.no_timeout);
+        EXPECT_EQ(NfcEvent::CLOSE_CPLT, res.args->last_event_);
+        EXPECT_EQ(NfcStatus::OK, res.args->last_status_);
+    }
+
+    sp<INfc> nfc_;
+    sp<NfcClientCallback> nfc_cb_;
+};
+
+/*
+ * getConfig:
+ * Calls getConfig()
+ * checks if fields in NfcConfig are populated correctly
+ */
+TEST_F(NfcHidlTest, GetExtendedConfig) {
+    nfc_->getConfig_1_2([](NfcConfig config) {
+        for (uint8_t uicc : config.offHostRouteUicc) {
+            EXPECT_GE(uicc, MIN_OFFHOST_ROUTE_ID);
+            EXPECT_LE(uicc, MAX_OFFHOST_ROUTE_ID);
+        }
+        for (uint8_t ese : config.offHostRouteEse) {
+            EXPECT_GE(ese, MIN_OFFHOST_ROUTE_ID);
+            EXPECT_LE(ese, MAX_OFFHOST_ROUTE_ID);
+        }
+        if (config.defaultIsoDepRoute != 0) {
+            EXPECT_GE(config.defaultIsoDepRoute, MIN_OFFHOST_ROUTE_ID);
+            EXPECT_LE(config.defaultIsoDepRoute, MAX_OFFHOST_ROUTE_ID);
+        }
+    });
+}
+
+int main(int argc, char** argv) {
+    ::testing::AddGlobalTestEnvironment(NfcHidlEnvironment::Instance());
+    ::testing::InitGoogleTest(&argc, argv);
+    NfcHidlEnvironment::Instance()->init(&argc, argv);
+
+    std::system("svc nfc disable"); /* Turn off NFC */
+    sleep(5);
+
+    int status = RUN_ALL_TESTS();
+    LOG(INFO) << "Test result = " << status;
+
+    std::system("svc nfc enable"); /* Turn on NFC */
+    sleep(5);
+
+    return status;
+}
diff --git a/oemlock/1.0/vts/functional/Android.bp b/oemlock/1.0/vts/functional/Android.bp
index 20737a1..28d6bf6 100644
--- a/oemlock/1.0/vts/functional/Android.bp
+++ b/oemlock/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalOemLockV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.oemlock@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/power/1.0/vts/functional/Android.bp b/power/1.0/vts/functional/Android.bp
index 45f74fc..a716f02 100644
--- a/power/1.0/vts/functional/Android.bp
+++ b/power/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalPowerV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.power@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/power/1.1/vts/functional/Android.bp b/power/1.1/vts/functional/Android.bp
index 604cd36..de75984 100644
--- a/power/1.1/vts/functional/Android.bp
+++ b/power/1.1/vts/functional/Android.bp
@@ -22,4 +22,5 @@
         "android.hardware.power@1.0",
         "android.hardware.power@1.1",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/power/1.2/vts/functional/Android.bp b/power/1.2/vts/functional/Android.bp
index d615e85..f424bfa 100644
--- a/power/1.2/vts/functional/Android.bp
+++ b/power/1.2/vts/functional/Android.bp
@@ -23,4 +23,5 @@
         "android.hardware.power@1.1",
         "android.hardware.power@1.2",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/power/1.3/Android.bp b/power/1.3/Android.bp
index 65b7597..1869b56 100644
--- a/power/1.3/Android.bp
+++ b/power/1.3/Android.bp
@@ -3,6 +3,9 @@
 hidl_interface {
     name: "android.hardware.power@1.3",
     root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
     srcs: [
         "types.hal",
         "IPower.hal",
diff --git a/power/1.3/vts/functional/Android.bp b/power/1.3/vts/functional/Android.bp
index 34cdb60..06f6e7a 100644
--- a/power/1.3/vts/functional/Android.bp
+++ b/power/1.3/vts/functional/Android.bp
@@ -24,4 +24,5 @@
         "android.hardware.power@1.2",
         "android.hardware.power@1.3",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/power/stats/1.0/Android.bp b/power/stats/1.0/Android.bp
new file mode 100644
index 0000000..9a956e4
--- /dev/null
+++ b/power/stats/1.0/Android.bp
@@ -0,0 +1,29 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.power.stats@1.0",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IPowerStats.hal",
+    ],
+    interfaces: [
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "EnergyData",
+        "PowerEntityInfo",
+        "PowerEntityStateInfo",
+        "PowerEntityStateResidencyData",
+        "PowerEntityStateResidencyResult",
+        "PowerEntityStateSpace",
+        "PowerEntityType",
+        "RailInfo",
+        "Status",
+    ],
+    gen_java: false,
+}
+
diff --git a/power/stats/1.0/IPowerStats.hal b/power/stats/1.0/IPowerStats.hal
new file mode 100644
index 0000000..74ceb8f
--- /dev/null
+++ b/power/stats/1.0/IPowerStats.hal
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.power.stats@1.0;
+
+interface IPowerStats {
+
+    /**
+     * Rail information:
+     * Reports information related to the rails being monitored.
+     *
+     * @return rails Information about monitored rails.
+     * @return status SUCCESS on success or NOT_SUPPORTED if
+     *     feature is not enabled or FILESYSTEM_ERROR on filesystem nodes
+     *     access error.
+     */
+    getRailInfo()
+        generates(vec<RailInfo> rails, Status status);
+
+    /**
+     * Rail level energy measurements for low frequency clients:
+     * Reports accumulated energy since boot on each rail.
+     *
+     * @param railIndices Indices of rails for which data is required.
+     *     To get data for all rails pass an empty vector. Rail name to
+     *     index mapping can be queried from getRailInfo() API.
+     * @return data Energy values since boot for all requested rails.
+     * @return status SUCCESS on success or NOT_SUPPORTED if
+     *     feature is not enabled or FILESYSTEM_ERROR on filesystem nodes
+     *     access error.
+     */
+    getEnergyData(vec<uint32_t> railIndices)
+        generates(vec<EnergyData> data, Status status);
+
+    /**
+     * Stream rail level power measurements for high frequency clients:
+     * Streams accumulated energy since boot on each rail. This API is
+     * asynchronous.
+     *
+     * @param timeMs Time(in ms) for which energyData should be streamed
+     * @param samplingRate Frequency(in Hz) at which samples should be
+     *     captured. If the requested sampling rate is not supported then
+     *     SUCCESS is returned and numSamples are reported back according
+     *     to the supported sampling rate.
+     * @return mqDesc Blocking Synchronous Fast Message Queue descriptor - One
+     *     writer(power.stats HAL) and one reader are supported. Data is
+     *     present in the following format in the queue:
+     *     +-----------------------+       <--
+     *     | EnergyData for rail 1 |         |
+     *     +-----------------------+         |
+     *     | EnergyData for rail 2 |         |
+     *     +-----------------------+         |
+     *     |          .            |         |-- 1st Sample
+     *     |          .            |         |
+     *     |          .            |         |
+     *     +-----------------------+         |
+     *     | EnergyData for rail n |         |
+     *     +-----------------------+       <--
+     *     |          .            |
+     *     |          .            |
+     *     |          .            |
+     *     +-----------------------+       <--
+     *     | EnergyData for rail 1 |         |
+     *     +-----------------------+         |
+     *     | EnergyData for rail 2 |         |
+     *     +-----------------------+         |
+     *     |          .            |         |-- kth Sample
+     *     |          .            |         |
+     *     |          .            |         |
+     *     +-----------------------+         |
+     *     | EnergyData for rail n |         |
+     *     +-----------------------+       <--
+     *
+     *     where,
+     *     n = railsPerSample
+     *     k = numSamples
+     *
+     * @return numSamples Number of samples which will be generated in timeMs.
+     * @return railsPerSample Number of rails measured per sample.
+     * @return status SUCCESS on success or FILESYSTEM_ERROR on filesystem
+     *     nodes access or NOT_SUPPORTED if feature is not enabled or
+     *     INSUFFICIENT_RESOURCES if there are not enough resources.
+     */
+    streamEnergyData(uint32_t timeMs, uint32_t samplingRate)
+        generates(fmq_sync<EnergyData> mqDesc, uint32_t numSamples,
+                uint32_t railsPerSample, Status status);
+
+    /**
+     * PowerEntity information:
+     * Reports information related to all supported PowerEntity(s) for which
+     * data is available. A PowerEntity is defined as a platform subsystem,
+     * peripheral, or power domain that impacts the total device power
+     * consumption.
+     *
+     * @return powerEntityInfos List of information on each PowerEntity
+     * @return status SUCCESS on success, NOT_SUPPORTED if feature is not
+     *     enabled, FILESYSTEM_ERROR if there was an error accessing the
+     *     filesystem.
+     */
+    getPowerEntityInfo()
+        generates(vec<PowerEntityInfo> powerEntityInfos, Status status);
+
+    /**
+     * PowerEntity state information:
+     * Reports the set of power states for which the specified
+     * PowerEntity(s) provide residency data.
+     *
+     * @param powerEntityIds collection of IDs of PowerEntity(s) for which
+     *     state information is requested. PowerEntity name to ID mapping may
+     *     be queried from getPowerEntityInfo(). To get state space
+     *     information for all PowerEntity(s) pass an empty vector.
+     *
+     * @return powerEntityStateSpaces PowerEntity state space information for
+     *     each specified PowerEntity that provides state space information.
+     * @return status SUCCESS on success, NOT_SUPPORTED if feature is not
+     *     enabled, FILESYSTEM_ERROR if there was an error accessing the
+     *     filesystem, INVALID_INPUT if any requested PowerEntity(s) do not
+     *     provide state space information and there was not a filesystem error.
+     */
+    getPowerEntityStateInfo(vec<uint32_t> powerEntityIds)
+        generates(vec<PowerEntityStateSpace> powerEntityStateSpaces,
+                  Status status);
+
+    /**
+     * PowerEntity residencies for low frequency clients:
+     * Reports accumulated residency data for each specified PowerEntity.
+     * Each PowerEntity may reside in one of multiple states. It may also
+     * transition to another state. Residency data is an accumulation of time
+     * that a specified PowerEntity resided in each of its possible states,
+     * the number of times that each state was entered, and a timestamp
+     * corresponding to the last time that state was entered. Data is
+     * accumulated starting from the last time the PowerEntity was reset.
+     *
+     * @param powerEntityId collection of IDs of PowerEntity(s) for which
+     *     residency data is requested. PowerEntity name to ID mapping may
+     *     be queried from getPowerEntityInfo(). To get state residency
+     *     data for all PowerEntity(s) pass an empty vector.
+     * @return stateResidencyResults state residency data for each specified
+     *     PowerEntity that provides state residency data.
+     * @return status SUCCESS on success, NOT_SUPPORTED if feature is not
+     *     enabled, FILESYSTEM_ERROR if there was an error accessing the
+     *     filesystem, INVALID_INPUT if any requested PowerEntity(s) do not
+     *     provide state residency data and there was not a filesystem error.
+     */
+    getPowerEntityStateResidencyData(vec<uint32_t> powerEntityIds)
+        generates(vec<PowerEntityStateResidencyResult> stateResidencyResults,
+                  Status status);
+};
diff --git a/power/stats/1.0/default/Android.bp b/power/stats/1.0/default/Android.bp
new file mode 100644
index 0000000..04270c1
--- /dev/null
+++ b/power/stats/1.0/default/Android.bp
@@ -0,0 +1,34 @@
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+
+cc_library_shared {
+    name: "android.hardware.power.stats@1.0-service",
+    relative_install_path: "hw",
+    init_rc: ["android.hardware.power.stats@1.0-service.rc"],
+    srcs: ["service.cpp", "PowerStats.cpp"],
+    cflags: [
+        "-Wall",
+        "-Werror",
+    ],
+    shared_libs: [
+        "libbase",
+        "libcutils",
+        "libfmq",
+        "libhidlbase",
+        "libhidltransport",
+        "liblog",
+        "libutils",
+        "android.hardware.power.stats@1.0",
+    ],
+    vendor: true,
+}
diff --git a/power/stats/1.0/default/PowerStats.cpp b/power/stats/1.0/default/PowerStats.cpp
new file mode 100644
index 0000000..810c575
--- /dev/null
+++ b/power/stats/1.0/default/PowerStats.cpp
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PowerStats.h"
+#include <android-base/file.h>
+#include <android-base/logging.h>
+#include <android-base/properties.h>
+#include <android-base/stringprintf.h>
+#include <android-base/strings.h>
+#include <inttypes.h>
+#include <stdlib.h>
+#include <algorithm>
+#include <exception>
+#include <thread>
+
+namespace android {
+namespace hardware {
+namespace power {
+namespace stats {
+namespace V1_0 {
+namespace implementation {
+
+#define MAX_FILE_PATH_LEN 128
+#define MAX_DEVICE_NAME_LEN 64
+#define MAX_QUEUE_SIZE 8192
+
+constexpr char kIioDirRoot[] = "/sys/bus/iio/devices/";
+constexpr char kDeviceName[] = "pm_device_name";
+constexpr char kDeviceType[] = "iio:device";
+constexpr uint32_t MAX_SAMPLING_RATE = 10;
+constexpr uint64_t WRITE_TIMEOUT_NS = 1000000000;
+
+void PowerStats::findIioPowerMonitorNodes() {
+    struct dirent* ent;
+    int fd;
+    char devName[MAX_DEVICE_NAME_LEN];
+    char filePath[MAX_FILE_PATH_LEN];
+    DIR* iioDir = opendir(kIioDirRoot);
+    if (!iioDir) {
+        ALOGE("Error opening directory: %s", kIioDirRoot);
+        return;
+    }
+    while (ent = readdir(iioDir), ent) {
+        if (strcmp(ent->d_name, ".") != 0 && strcmp(ent->d_name, "..") != 0 &&
+            strlen(ent->d_name) > strlen(kDeviceType) &&
+            strncmp(ent->d_name, kDeviceType, strlen(kDeviceType)) == 0) {
+            snprintf(filePath, MAX_FILE_PATH_LEN, "%s/%s", ent->d_name, "name");
+            fd = openat(dirfd(iioDir), filePath, O_RDONLY);
+            if (fd < 0) {
+                ALOGW("Failed to open directory: %s", filePath);
+                continue;
+            }
+            if (read(fd, devName, MAX_DEVICE_NAME_LEN) < 0) {
+                ALOGW("Failed to read device name from file: %s(%d)", filePath, fd);
+                close(fd);
+                continue;
+            }
+
+            if (strncmp(devName, kDeviceName, strlen(kDeviceName)) == 0) {
+                snprintf(filePath, MAX_FILE_PATH_LEN, "%s/%s", kIioDirRoot, ent->d_name);
+                mPm.devicePaths.push_back(filePath);
+            }
+            close(fd);
+        }
+    }
+    closedir(iioDir);
+    return;
+}
+
+size_t PowerStats::parsePowerRails() {
+    std::string data;
+    std::string railFileName;
+    std::string spsFileName;
+    uint32_t index = 0;
+    uint32_t samplingRate;
+    for (const auto& path : mPm.devicePaths) {
+        railFileName = path + "/enabled_rails";
+        spsFileName = path + "/sampling_rate";
+        if (!android::base::ReadFileToString(spsFileName, &data)) {
+            ALOGW("Error reading file: %s", spsFileName.c_str());
+            continue;
+        }
+        samplingRate = strtoul(data.c_str(), NULL, 10);
+        if (!samplingRate || samplingRate == ULONG_MAX) {
+            ALOGE("Error parsing: %s", spsFileName.c_str());
+            break;
+        }
+        if (!android::base::ReadFileToString(railFileName, &data)) {
+            ALOGW("Error reading file: %s", railFileName.c_str());
+            continue;
+        }
+        std::istringstream railNames(data);
+        std::string line;
+        while (std::getline(railNames, line)) {
+            std::vector<std::string> words = android::base::Split(line, ":");
+            if (words.size() == 2) {
+                mPm.railsInfo.emplace(words[0], RailData{.devicePath = path,
+                                                         .index = index,
+                                                         .subsysName = words[1],
+                                                         .samplingRate = samplingRate});
+                index++;
+            } else {
+                ALOGW("Unexpected format in file: %s", railFileName.c_str());
+            }
+        }
+    }
+    return index;
+}
+
+int PowerStats::parseIioEnergyNode(std::string devName) {
+    int ret = 0;
+    std::string data;
+    std::string fileName = devName + "/energy_value";
+    if (!android::base::ReadFileToString(fileName, &data)) {
+        ALOGE("Error reading file: %s", fileName.c_str());
+        return -1;
+    }
+
+    std::istringstream energyData(data);
+    std::string line;
+    uint64_t timestamp = 0;
+    bool timestampRead = false;
+    while (std::getline(energyData, line)) {
+        std::vector<std::string> words = android::base::Split(line, ",");
+        if (timestampRead == false) {
+            if (words.size() == 1) {
+                timestamp = strtoull(words[0].c_str(), NULL, 10);
+                if (timestamp == 0 || timestamp == ULLONG_MAX) {
+                    ALOGW("Potentially wrong timestamp: %" PRIu64, timestamp);
+                }
+                timestampRead = true;
+            }
+        } else if (words.size() == 2) {
+            std::string railName = words[0];
+            if (mPm.railsInfo.count(railName) != 0) {
+                size_t index = mPm.railsInfo[railName].index;
+                mPm.reading[index].index = index;
+                mPm.reading[index].timestamp = timestamp;
+                mPm.reading[index].energy = strtoull(words[1].c_str(), NULL, 10);
+                if (mPm.reading[index].energy == ULLONG_MAX) {
+                    ALOGW("Potentially wrong energy value: %" PRIu64, mPm.reading[index].energy);
+                }
+            }
+        } else {
+            ALOGW("Unexpected format in file: %s", fileName.c_str());
+            ret = -1;
+            break;
+        }
+    }
+    return ret;
+}
+
+Status PowerStats::parseIioEnergyNodes() {
+    Status ret = Status::SUCCESS;
+    if (mPm.hwEnabled == false) {
+        return Status::NOT_SUPPORTED;
+    }
+
+    for (const auto& devicePath : mPm.devicePaths) {
+        if (parseIioEnergyNode(devicePath) < 0) {
+            ALOGE("Error in parsing power stats");
+            ret = Status::FILESYSTEM_ERROR;
+            break;
+        }
+    }
+    return ret;
+}
+
+PowerStats::PowerStats() {
+    findIioPowerMonitorNodes();
+    size_t numRails = parsePowerRails();
+    if (mPm.devicePaths.empty() || numRails == 0) {
+        mPm.hwEnabled = false;
+    } else {
+        mPm.hwEnabled = true;
+        mPm.reading.resize(numRails);
+    }
+}
+
+Return<void> PowerStats::getRailInfo(getRailInfo_cb _hidl_cb) {
+    hidl_vec<RailInfo> rInfo;
+    Status ret = Status::SUCCESS;
+    size_t index;
+    std::lock_guard<std::mutex> _lock(mPm.mLock);
+    if (mPm.hwEnabled == false) {
+        _hidl_cb(rInfo, Status::NOT_SUPPORTED);
+        return Void();
+    }
+    rInfo.resize(mPm.railsInfo.size());
+    for (const auto& railData : mPm.railsInfo) {
+        index = railData.second.index;
+        rInfo[index].railName = railData.first;
+        rInfo[index].subsysName = railData.second.subsysName;
+        rInfo[index].index = index;
+        rInfo[index].samplingRate = railData.second.samplingRate;
+    }
+    _hidl_cb(rInfo, ret);
+    return Void();
+}
+
+Return<void> PowerStats::getEnergyData(const hidl_vec<uint32_t>& railIndices,
+                                       getEnergyData_cb _hidl_cb) {
+    hidl_vec<EnergyData> eVal;
+    std::lock_guard<std::mutex> _lock(mPm.mLock);
+    Status ret = parseIioEnergyNodes();
+
+    if (ret != Status::SUCCESS) {
+        ALOGE("Failed to getEnergyData");
+        _hidl_cb(eVal, ret);
+        return Void();
+    }
+
+    if (railIndices.size() == 0) {
+        eVal.resize(mPm.railsInfo.size());
+        memcpy(&eVal[0], &mPm.reading[0], mPm.reading.size() * sizeof(EnergyData));
+    } else {
+        eVal.resize(railIndices.size());
+        int i = 0;
+        for (const auto& railIndex : railIndices) {
+            if (railIndex >= mPm.reading.size()) {
+                ret = Status::INVALID_INPUT;
+                eVal.resize(0);
+                break;
+            }
+            memcpy(&eVal[i], &mPm.reading[railIndex], sizeof(EnergyData));
+            i++;
+        }
+    }
+    _hidl_cb(eVal, ret);
+    return Void();
+}
+
+Return<void> PowerStats::streamEnergyData(uint32_t timeMs, uint32_t samplingRate,
+                                          streamEnergyData_cb _hidl_cb) {
+    std::lock_guard<std::mutex> _lock(mPm.mLock);
+    if (mPm.fmqSynchronized != nullptr) {
+        _hidl_cb(MessageQueueSync::Descriptor(), 0, 0, Status::INSUFFICIENT_RESOURCES);
+        return Void();
+    }
+    uint32_t sps = std::min(samplingRate, MAX_SAMPLING_RATE);
+    uint32_t numSamples = timeMs * sps / 1000;
+    mPm.fmqSynchronized.reset(new (std::nothrow) MessageQueueSync(MAX_QUEUE_SIZE, true));
+    if (mPm.fmqSynchronized == nullptr || mPm.fmqSynchronized->isValid() == false) {
+        mPm.fmqSynchronized = nullptr;
+        _hidl_cb(MessageQueueSync::Descriptor(), 0, 0, Status::INSUFFICIENT_RESOURCES);
+        return Void();
+    }
+    std::thread pollThread = std::thread([this, sps, numSamples]() {
+        uint64_t sleepTimeUs = 1000000 / sps;
+        uint32_t currSamples = 0;
+        while (currSamples < numSamples) {
+            mPm.mLock.lock();
+            if (parseIioEnergyNodes() == Status::SUCCESS) {
+                mPm.fmqSynchronized->writeBlocking(&mPm.reading[0], mPm.reading.size(),
+                                                   WRITE_TIMEOUT_NS);
+                mPm.mLock.unlock();
+                currSamples++;
+                if (usleep(sleepTimeUs) < 0) {
+                    ALOGW("Sleep interrupted");
+                    break;
+                }
+            } else {
+                mPm.mLock.unlock();
+                break;
+            }
+        }
+        mPm.mLock.lock();
+        mPm.fmqSynchronized = nullptr;
+        mPm.mLock.unlock();
+        return;
+    });
+    pollThread.detach();
+    _hidl_cb(*(mPm.fmqSynchronized)->getDesc(), numSamples, mPm.reading.size(), Status::SUCCESS);
+    return Void();
+}
+
+Return<void> PowerStats::getPowerEntityInfo(getPowerEntityInfo_cb _hidl_cb) {
+    hidl_vec<PowerEntityInfo> eInfo;
+    _hidl_cb(eInfo, Status::NOT_SUPPORTED);
+    return Void();
+}
+
+Return<void> PowerStats::getPowerEntityStateInfo(const hidl_vec<uint32_t>& powerEntityIds,
+                                                 getPowerEntityStateInfo_cb _hidl_cb) {
+    (void)powerEntityIds;
+    hidl_vec<PowerEntityStateSpace> powerEntityStateSpaces;
+    _hidl_cb(powerEntityStateSpaces, Status::NOT_SUPPORTED);
+    return Void();
+}
+
+Return<void> PowerStats::getPowerEntityStateResidencyData(
+    const hidl_vec<uint32_t>& powerEntityIds, getPowerEntityStateResidencyData_cb _hidl_cb) {
+    (void)powerEntityIds;
+    hidl_vec<PowerEntityStateResidencyResult> results;
+    _hidl_cb(results, Status::NOT_SUPPORTED);
+    return Void();
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace stats
+}  // namespace power
+}  // namespace hardware
+}  // namespace android
diff --git a/power/stats/1.0/default/PowerStats.h b/power/stats/1.0/default/PowerStats.h
new file mode 100644
index 0000000..fb2c6a8
--- /dev/null
+++ b/power/stats/1.0/default/PowerStats.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_POWERSTATS_V1_0_POWERSTATS_H
+#define ANDROID_HARDWARE_POWERSTATS_V1_0_POWERSTATS_H
+
+#include <android/hardware/power/stats/1.0/IPowerStats.h>
+#include <fmq/MessageQueue.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace power {
+namespace stats {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::hidl_vec;
+using ::android::hardware::kSynchronizedReadWrite;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::power::stats::V1_0::EnergyData;
+using ::android::hardware::power::stats::V1_0::PowerEntityInfo;
+using ::android::hardware::power::stats::V1_0::PowerEntityStateInfo;
+using ::android::hardware::power::stats::V1_0::PowerEntityStateResidencyData;
+using ::android::hardware::power::stats::V1_0::PowerEntityStateResidencyResult;
+using ::android::hardware::power::stats::V1_0::PowerEntityStateSpace;
+using ::android::hardware::power::stats::V1_0::PowerEntityType;
+using ::android::hardware::power::stats::V1_0::RailInfo;
+using ::android::hardware::power::stats::V1_0::Status;
+
+typedef MessageQueue<EnergyData, kSynchronizedReadWrite> MessageQueueSync;
+struct RailData {
+    std::string devicePath;
+    uint32_t index;
+    std::string subsysName;
+    uint32_t samplingRate;
+};
+
+struct OnDeviceMmt {
+    std::mutex mLock;
+    bool hwEnabled;
+    std::vector<std::string> devicePaths;
+    std::map<std::string, RailData> railsInfo;
+    std::vector<EnergyData> reading;
+    std::unique_ptr<MessageQueueSync> fmqSynchronized;
+};
+
+struct PowerStats : public IPowerStats {
+    PowerStats();
+    // Methods from ::android::hardware::power::stats::V1_0::IPowerStats follow.
+    Return<void> getRailInfo(getRailInfo_cb _hidl_cb) override;
+    Return<void> getEnergyData(const hidl_vec<uint32_t>& railIndices,
+                               getEnergyData_cb _hidl_cb) override;
+    Return<void> streamEnergyData(uint32_t timeMs, uint32_t samplingRate,
+                                  streamEnergyData_cb _hidl_cb) override;
+    Return<void> getPowerEntityInfo(getPowerEntityInfo_cb _hidl_cb) override;
+    Return<void> getPowerEntityStateInfo(const hidl_vec<uint32_t>& powerEntityIds,
+                                         getPowerEntityStateInfo_cb _hidl_cb) override;
+    Return<void> getPowerEntityStateResidencyData(
+        const hidl_vec<uint32_t>& powerEntityIds,
+        getPowerEntityStateResidencyData_cb _hidl_cb) override;
+
+   private:
+    OnDeviceMmt mPm;
+    void findIioPowerMonitorNodes();
+    size_t parsePowerRails();
+    int parseIioEnergyNode(std::string devName);
+    Status parseIioEnergyNodes();
+};
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace stats
+}  // namespace power
+}  // namespace hardware
+}  // namespace android
+
+#endif  // ANDROID_HARDWARE_POWERSTATS_V1_0_POWERSTATS_H
diff --git a/power/stats/1.0/default/android.hardware.power.stats@1.0-service.rc b/power/stats/1.0/default/android.hardware.power.stats@1.0-service.rc
new file mode 100644
index 0000000..d7e546b
--- /dev/null
+++ b/power/stats/1.0/default/android.hardware.power.stats@1.0-service.rc
@@ -0,0 +1,4 @@
+service vendor.power.stats-hal-1-0 /vendor/bin/hw/android.hardware.power.stats@1.0-service
+    class hal
+    user system
+    group system
diff --git a/power/stats/1.0/default/service.cpp b/power/stats/1.0/default/service.cpp
new file mode 100644
index 0000000..80649f5
--- /dev/null
+++ b/power/stats/1.0/default/service.cpp
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.power.stats@1.0-service"
+
+#include <android/log.h>
+#include <hidl/HidlTransportSupport.h>
+
+#include "PowerStats.h"
+
+using android::OK;
+using android::sp;
+using android::status_t;
+
+// libhwbinder:
+using android::hardware::configureRpcThreadpool;
+using android::hardware::joinRpcThreadpool;
+
+// Generated HIDL files
+using android::hardware::power::stats::V1_0::IPowerStats;
+using android::hardware::power::stats::V1_0::implementation::PowerStats;
+
+int main(int /* argc */, char** /* argv */) {
+    ALOGI("power.stats service 1.0 is starting.");
+
+    android::sp<IPowerStats> service = new PowerStats();
+    if (service == nullptr) {
+        ALOGE("Can not create an instance of power.stats HAL Iface, exiting.");
+        return 1;
+    }
+
+    configureRpcThreadpool(1, true /*callerWillJoin*/);
+
+    status_t status = service->registerAsService();
+    if (status != OK) {
+        ALOGE("Could not register service for power.stats HAL Iface (%d), exiting.", status);
+        return 1;
+    }
+
+    ALOGI("power.stats service is ready");
+    joinRpcThreadpool();
+
+    // In normal operation, we don't expect the thread pool to exit
+    ALOGE("power.stats service is shutting down");
+    return 1;
+}
diff --git a/power/stats/1.0/types.hal b/power/stats/1.0/types.hal
new file mode 100644
index 0000000..644224b
--- /dev/null
+++ b/power/stats/1.0/types.hal
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package android.hardware.power.stats@1.0;
+
+enum Status : uint32_t {
+    SUCCESS = 0,
+    NOT_SUPPORTED = 1,
+    INVALID_INPUT = 2,
+    FILESYSTEM_ERROR = 3,
+    INSUFFICIENT_RESOURCES = 4,
+};
+
+struct RailInfo {
+    /** Index corresponding to the rail */
+    uint32_t index;
+    /** Name of the rail */
+    string railName;
+    /** Name of the subsystem to which this rail belongs */
+    string subsysName;
+    /** Hardware sampling rate */
+    uint32_t samplingRate;
+};
+
+struct EnergyData {
+    /**
+     * Index corresponding to the rail. This index matches
+     * the index returned in RailInfo
+     */
+    uint32_t index;
+    /** Time since device boot(CLOCK_BOOTTIME) in milli-seconds */
+    uint64_t timestamp;
+    /** Accumulated energy since device boot in microwatt-seconds (uWs) */
+    uint64_t energy;
+};
+
+enum PowerEntityType : uint32_t {
+    /**
+     * A subsystem is a self-contained compute unit. Some examples include
+     * application processor, DSP, GPU.
+     */
+    SUBSYSTEM = 0,
+    /**
+     * A peripheral is an auxiliary device that connects to and works with a
+     * compute unit. Some examples include simple sensors, camera, display.
+     */
+    PERIPHERAL = 1,
+    /**
+     * A power domain is a single subsystem or a collection of subsystems
+     * that is controlled by a single voltage rail.
+     */
+    POWER_DOMAIN = 2,
+};
+
+/**
+ * PowerEntityInfo contains information, such as the ID, name, and type of a
+ * given PowerEntity.
+ */
+struct PowerEntityInfo {
+    /** Unique ID corresponding to the PowerEntity */
+    uint32_t powerEntityId;
+    /** Name of the PowerEntity */
+    string powerEntityName;
+    /** Type of the PowerEntity */
+    PowerEntityType type;
+};
+
+struct PowerEntityStateInfo {
+    /**
+     * ID corresponding to the state. Unique for a given PowerEntityStateSpace
+     */
+    uint32_t powerEntityStateId;
+    /** Name of the state */
+    string powerEntityStateName;
+};
+
+/**
+ * PowerEntityStateSpace contains the state space information of a given
+ * PowerEntity. The state space, is the set of possible states that a given
+ * PowerEntity provides residency data for.
+ */
+struct PowerEntityStateSpace {
+    /** Unique ID of the corresponding PowerEntity */
+    uint32_t powerEntityId;
+
+    /** List of states that the PowerEntity may reside in */
+    vec<PowerEntityStateInfo> states;
+};
+
+/** Contains residency data for a single state */
+struct PowerEntityStateResidencyData {
+    /** Unique ID of the corresponding PowerEntityStateInfo */
+    uint32_t powerEntityStateId;
+    /**
+     * Total time in milliseconds that the corresponding PowerEntity resided
+     * in this state since the PowerEntity was reset
+     */
+    uint64_t totalTimeInStateMs;
+    /**
+     * Total number of times that the state was entered since the corresponding
+     * PowerEntity was reset
+     */
+    uint64_t totalStateEntryCount;
+    /**
+     * Last time this state was entered. Time in milliseconds since the
+     * corresponding PowerEntity was reset
+     */
+    uint64_t lastEntryTimestampMs;
+};
+
+struct PowerEntityStateResidencyResult {
+    /** Unique ID of the corresponding PowerEntity */
+    uint32_t powerEntityId;
+    /** Residency data for each state the PowerEntity's state space */
+    vec<PowerEntityStateResidencyData> stateResidencyData;
+};
diff --git a/power/stats/1.0/vts/functional/Android.bp b/power/stats/1.0/vts/functional/Android.bp
new file mode 100644
index 0000000..4f0b325
--- /dev/null
+++ b/power/stats/1.0/vts/functional/Android.bp
@@ -0,0 +1,38 @@
+//
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_test {
+    name: "VtsHalPowerStatsV1_0TargetTest",
+    defaults: [
+        "VtsHalTargetTestDefaults"
+    ],
+    srcs: [
+        "VtsHalPowerStatsV1_0TargetTest.cpp"
+    ],
+    static_libs: [
+        "android.hardware.power.stats@1.0"
+    ],
+    shared_libs: [
+        "libbase",
+        "libcutils",
+        "liblog",
+        "libhidlbase",
+        "libfmq",
+        "libhidltransport",
+        "libhwbinder",
+        "libutils",
+    ],
+}
diff --git a/power/stats/1.0/vts/functional/VtsHalPowerStatsV1_0TargetTest.cpp b/power/stats/1.0/vts/functional/VtsHalPowerStatsV1_0TargetTest.cpp
new file mode 100644
index 0000000..9f007e4
--- /dev/null
+++ b/power/stats/1.0/vts/functional/VtsHalPowerStatsV1_0TargetTest.cpp
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.power.stats.vts"
+
+#include <VtsHalHidlTargetTestBase.h>
+#include <VtsHalHidlTargetTestEnvBase.h>
+#include <android-base/logging.h>
+#include <android/hardware/power/stats/1.0/IPowerStats.h>
+#include <fmq/MessageQueue.h>
+#include <hidl/MQDescriptor.h>
+#include <inttypes.h>
+#include <algorithm>
+#include <random>
+#include <thread>
+
+namespace android {
+namespace power {
+namespace stats {
+namespace vts {
+namespace {
+
+using android::sp;
+using android::hardware::hidl_vec;
+using android::hardware::kSynchronizedReadWrite;
+using android::hardware::Return;
+using android::hardware::Void;
+using android::hardware::power::stats::V1_0::EnergyData;
+using android::hardware::power::stats::V1_0::IPowerStats;
+using android::hardware::power::stats::V1_0::PowerEntityInfo;
+using android::hardware::power::stats::V1_0::PowerEntityStateResidencyResult;
+using android::hardware::power::stats::V1_0::PowerEntityStateSpace;
+using android::hardware::power::stats::V1_0::RailInfo;
+using android::hardware::power::stats::V1_0::Status;
+
+}  // namespace
+
+typedef hardware::MessageQueue<EnergyData, kSynchronizedReadWrite> MessageQueueSync;
+// Test environment for Power HIDL HAL.
+class PowerStatsHidlEnv : public ::testing::VtsHalHidlTargetTestEnvBase {
+   public:
+    // get the test environment singleton
+    static PowerStatsHidlEnv* Instance() {
+        static PowerStatsHidlEnv* instance = new PowerStatsHidlEnv;
+        return instance;
+    }
+
+    virtual void registerTestServices() override { registerTestService<IPowerStats>(); }
+};
+
+class PowerStatsHidlTest : public ::testing::VtsHalHidlTargetTestBase {
+   public:
+    virtual void SetUp() override {
+        service_ = ::testing::VtsHalHidlTargetTestBase::getService<IPowerStats>(
+            PowerStatsHidlEnv::Instance()->getServiceName<IPowerStats>());
+        ASSERT_NE(service_, nullptr);
+    }
+
+    virtual void TearDown() override {}
+
+    void getInfos(hidl_vec<PowerEntityInfo>& infos);
+    void getStateSpaces(hidl_vec<PowerEntityStateSpace>& stateSpaces,
+                        const std::vector<uint32_t>& ids);
+    void getResidencyResults(hidl_vec<PowerEntityStateResidencyResult>& results,
+                             const std::vector<uint32_t>& ids);
+    void getRandomIds(std::vector<uint32_t>& ids);
+
+    sp<IPowerStats> service_;
+};
+
+void PowerStatsHidlTest::getInfos(hidl_vec<PowerEntityInfo>& infos) {
+    Status status;
+    Return<void> ret = service_->getPowerEntityInfo([&status, &infos](auto rInfos, auto rStatus) {
+        status = rStatus;
+        infos = rInfos;
+    });
+    ASSERT_TRUE(ret.isOk());
+
+    if (status == Status::SUCCESS) {
+        ASSERT_NE(infos.size(), 0) << "powerEntityInfos must have entries if supported";
+    } else {
+        ASSERT_EQ(status, Status::NOT_SUPPORTED);
+        ASSERT_EQ(infos.size(), 0);
+        LOG(INFO) << "getPowerEntityInfo not supported";
+    }
+}
+
+void PowerStatsHidlTest::getStateSpaces(hidl_vec<PowerEntityStateSpace>& stateSpaces,
+                                        const std::vector<uint32_t>& ids = {}) {
+    Status status;
+    Return<void> ret = service_->getPowerEntityStateInfo(
+        ids, [&status, &stateSpaces](auto rStateSpaces, auto rStatus) {
+            status = rStatus;
+            stateSpaces = rStateSpaces;
+        });
+    ASSERT_TRUE(ret.isOk());
+
+    if (status == Status::SUCCESS) {
+        ASSERT_NE(stateSpaces.size(), 0) << "powerEntityStateSpaces must have entries if supported";
+    } else {
+        ASSERT_EQ(status, Status::NOT_SUPPORTED);
+        ASSERT_EQ(stateSpaces.size(), 0);
+        LOG(INFO) << "getPowerEntityStateInfo not supported";
+    }
+}
+
+void PowerStatsHidlTest::getResidencyResults(hidl_vec<PowerEntityStateResidencyResult>& results,
+                                             const std::vector<uint32_t>& ids = {}) {
+    Status status;
+    Return<void> ret = service_->getPowerEntityStateResidencyData(
+        ids, [&status, &results](auto rResults, auto rStatus) {
+            status = rStatus;
+            results = rResults;
+        });
+    ASSERT_TRUE(ret.isOk());
+
+    if (status == Status::SUCCESS) {
+        ASSERT_NE(results.size(), 0);
+    } else {
+        ASSERT_EQ(status, Status::NOT_SUPPORTED);
+        ASSERT_EQ(results.size(), 0);
+        LOG(INFO) << "getPowerEntityStateResidencyData not supported";
+    }
+}
+
+void PowerStatsHidlTest::getRandomIds(std::vector<uint32_t>& ids) {
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces);
+
+    if (stateSpaces.size() == 0) {
+        return;
+    }
+
+    for (auto stateSpace : stateSpaces) {
+        ids.push_back(stateSpace.powerEntityId);
+    }
+
+    unsigned seed = std::chrono::system_clock::now().time_since_epoch().count();
+    auto gen = std::default_random_engine(seed);
+    std::uniform_int_distribution<uint32_t> dist(1, stateSpaces.size());
+
+    std::shuffle(ids.begin(), ids.end(), gen);
+    ids.resize(dist(gen));
+}
+
+// Each PowerEntity must have a valid name
+TEST_F(PowerStatsHidlTest, ValidatePowerEntityNames) {
+    hidl_vec<PowerEntityInfo> infos;
+    getInfos(infos);
+    for (auto info : infos) {
+        ASSERT_NE(info.powerEntityName, "");
+    }
+}
+
+// Each PowerEntity must have a unique ID
+TEST_F(PowerStatsHidlTest, ValidatePowerEntityIds) {
+    hidl_vec<PowerEntityInfo> infos;
+    getInfos(infos);
+
+    set<uint32_t> ids;
+    for (auto info : infos) {
+        ASSERT_TRUE(ids.insert(info.powerEntityId).second);
+    }
+}
+
+// Each PowerEntityStateSpace must have an associated PowerEntityInfo
+TEST_F(PowerStatsHidlTest, ValidateStateInfoAssociation) {
+    hidl_vec<PowerEntityInfo> infos;
+    getInfos(infos);
+
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces);
+
+    std::set<uint32_t> ids;
+    for (auto info : infos) {
+        ids.insert(info.powerEntityId);
+    }
+
+    for (auto stateSpace : stateSpaces) {
+        ASSERT_NE(ids.count(stateSpace.powerEntityId), 0);
+    }
+}
+
+// Each state must have a valid name
+TEST_F(PowerStatsHidlTest, ValidateStateNames) {
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces);
+
+    for (auto stateSpace : stateSpaces) {
+        for (auto state : stateSpace.states) {
+            ASSERT_NE(state.powerEntityStateName, "");
+        }
+    }
+}
+
+// Each state must have an ID that is unique to the PowerEntityStateSpace
+TEST_F(PowerStatsHidlTest, ValidateStateUniqueIds) {
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces);
+
+    for (auto stateSpace : stateSpaces) {
+        set<uint32_t> stateIds;
+        for (auto state : stateSpace.states) {
+            ASSERT_TRUE(stateIds.insert(state.powerEntityStateId).second);
+        }
+    }
+}
+
+// getPowerEntityStateInfo must support passing in requested IDs
+// Results must contain state space information for all requested IDs
+TEST_F(PowerStatsHidlTest, ValidateStateInfoAssociationSelect) {
+    std::vector<uint32_t> randomIds;
+    getRandomIds(randomIds);
+
+    if (randomIds.empty()) {
+        return;
+    }
+
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces, randomIds);
+
+    ASSERT_EQ(stateSpaces.size(), randomIds.size());
+
+    std::set<uint32_t> ids;
+    for (auto id : randomIds) {
+        ids.insert(id);
+    }
+    for (auto stateSpace : stateSpaces) {
+        ASSERT_NE(ids.count(stateSpace.powerEntityId), 0);
+    }
+}
+
+// Requested state space info must match initially obtained stateinfos
+TEST_F(PowerStatsHidlTest, ValidateStateInfoSelect) {
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces);
+    if (stateSpaces.size() == 0) {
+        return;
+    }
+
+    std::vector<uint32_t> randomIds;
+    getRandomIds(randomIds);
+    ASSERT_FALSE(randomIds.empty());
+
+    hidl_vec<PowerEntityStateSpace> selectedStateSpaces;
+    getStateSpaces(selectedStateSpaces, randomIds);
+
+    std::map<uint32_t, PowerEntityStateSpace> stateSpaceMap;
+    for (auto stateSpace : stateSpaces) {
+        stateSpaceMap[stateSpace.powerEntityId] = stateSpace;
+    }
+
+    for (auto stateSpace : selectedStateSpaces) {
+        auto it = stateSpaceMap.find(stateSpace.powerEntityId);
+        ASSERT_NE(it, stateSpaceMap.end());
+
+        ASSERT_EQ(stateSpace.states.size(), it->second.states.size());
+        for (auto i = 0; i < stateSpace.states.size(); i++) {
+            ASSERT_EQ(stateSpace.states[i].powerEntityStateId,
+                      it->second.states[i].powerEntityStateId);
+            ASSERT_EQ(stateSpace.states[i].powerEntityStateName,
+                      it->second.states[i].powerEntityStateName);
+        }
+    }
+}
+
+// stateResidencyResults must contain results for every PowerEntityStateSpace
+// returned by getPowerEntityStateInfo
+TEST_F(PowerStatsHidlTest, ValidateResidencyResultsAssociation) {
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces);
+
+    hidl_vec<PowerEntityStateResidencyResult> results;
+    getResidencyResults(results);
+
+    std::map<uint32_t, PowerEntityStateResidencyResult> resultsMap;
+    for (auto result : results) {
+        resultsMap[result.powerEntityId] = result;
+    }
+
+    for (auto stateSpace : stateSpaces) {
+        auto it = resultsMap.find(stateSpace.powerEntityId);
+        ASSERT_NE(it, resultsMap.end());
+
+        ASSERT_EQ(stateSpace.states.size(), it->second.stateResidencyData.size());
+
+        std::set<uint32_t> stateIds;
+        for (auto residency : it->second.stateResidencyData) {
+            stateIds.insert(residency.powerEntityStateId);
+        }
+
+        for (auto state : stateSpace.states) {
+            ASSERT_NE(stateIds.count(state.powerEntityStateId), 0);
+        }
+    }
+}
+
+// getPowerEntityStateResidencyData must support passing in requested IDs
+// stateResidencyResults must contain results for each PowerEntityStateSpace
+// returned by getPowerEntityStateInfo
+TEST_F(PowerStatsHidlTest, ValidateResidencyResultsAssociationSelect) {
+    std::vector<uint32_t> randomIds;
+    getRandomIds(randomIds);
+    if (randomIds.empty()) {
+        return;
+    }
+
+    hidl_vec<PowerEntityStateSpace> stateSpaces;
+    getStateSpaces(stateSpaces, randomIds);
+
+    hidl_vec<PowerEntityStateResidencyResult> results;
+    getResidencyResults(results, randomIds);
+
+    std::map<uint32_t, PowerEntityStateResidencyResult> resultsMap;
+    for (auto result : results) {
+        resultsMap[result.powerEntityId] = result;
+    }
+
+    for (auto stateSpace : stateSpaces) {
+        auto it = resultsMap.find(stateSpace.powerEntityId);
+        ASSERT_NE(it, resultsMap.end());
+
+        ASSERT_EQ(stateSpace.states.size(), it->second.stateResidencyData.size());
+
+        std::set<uint32_t> stateIds;
+        for (auto residency : it->second.stateResidencyData) {
+            stateIds.insert(residency.powerEntityStateId);
+        }
+
+        for (auto state : stateSpace.states) {
+            ASSERT_NE(stateIds.count(state.powerEntityStateId), 0);
+        }
+    }
+}
+
+TEST_F(PowerStatsHidlTest, ValidateRailInfo) {
+    hidl_vec<RailInfo> rails[2];
+    Status s;
+    auto cb = [&rails, &s](hidl_vec<RailInfo> rail_subsys, Status status) {
+        rails[0] = rail_subsys;
+        s = status;
+    };
+    Return<void> ret = service_->getRailInfo(cb);
+    EXPECT_TRUE(ret.isOk());
+    if (s == Status::SUCCESS) {
+        /* Rails size should be non-zero on SUCCESS*/
+        ASSERT_NE(rails[0].size(), 0);
+        /* check if indices returned are unique*/
+        set<uint32_t> ids;
+        for (auto rail : rails[0]) {
+            ASSERT_TRUE(ids.insert(rail.index).second);
+        }
+        auto cb = [&rails, &s](hidl_vec<RailInfo> rail_subsys, Status status) {
+            rails[1] = rail_subsys;
+            s = status;
+        };
+        Return<void> ret = service_->getRailInfo(cb);
+        EXPECT_TRUE(ret.isOk());
+        ASSERT_EQ(s, Status::SUCCESS);
+        ASSERT_EQ(rails[0].size(), rails[1].size());
+        /* check if data returned by two calls to getRailInfo is same*/
+        for (int i = 0; i < rails[0].size(); i++) {
+            ASSERT_NE(rails[0][i].railName, "");
+            ASSERT_NE(rails[0][i].subsysName, "");
+            int j = 0;
+            bool match = false;
+            for (j = 0; j < rails[1].size(); j++) {
+                if (rails[0][i].index == rails[1][j].index) {
+                    ASSERT_EQ(rails[0][i].railName, rails[1][i].railName);
+                    ASSERT_EQ(rails[0][i].subsysName, rails[1][i].subsysName);
+                    match = true;
+                    break;
+                }
+            }
+            ASSERT_TRUE(match);
+        }
+    } else if (s == Status::FILESYSTEM_ERROR) {
+        ALOGI("ValidateRailInfo returned FILESYSTEM_ERROR");
+        ASSERT_EQ(rails[0].size(), 0);
+    } else if (s == Status::NOT_SUPPORTED) {
+        ALOGI("ValidateRailInfo returned NOT_SUPPORTED");
+        ASSERT_EQ(rails[0].size(), 0);
+    } else if (s == Status::INVALID_INPUT) {
+        ALOGI("ValidateRailInfo returned INVALID_INPUT");
+        ASSERT_EQ(rails[0].size(), 0);
+    } else if (s == Status::INSUFFICIENT_RESOURCES) {
+        ALOGI("ValidateRailInfo returned INSUFFICIENT_RESOURCES");
+        ASSERT_EQ(rails[0].size(), 0);
+    }
+}
+
+TEST_F(PowerStatsHidlTest, ValidateAllPowerData) {
+    hidl_vec<EnergyData> measurements[2];
+    Status s;
+    auto cb = [&measurements, &s](hidl_vec<EnergyData> measure, Status status) {
+        measurements[0] = measure;
+        s = status;
+    };
+    Return<void> ret = service_->getEnergyData(hidl_vec<uint32_t>(), cb);
+    EXPECT_TRUE(ret.isOk());
+    if (s == Status::SUCCESS) {
+        /*measurements size should be non-zero on SUCCESS*/
+        ASSERT_NE(measurements[0].size(), 0);
+        auto cb = [&measurements, &s](hidl_vec<EnergyData> measure, Status status) {
+            measurements[1] = measure;
+            s = status;
+        };
+        Return<void> ret = service_->getEnergyData(hidl_vec<uint32_t>(), cb);
+        EXPECT_TRUE(ret.isOk());
+        ASSERT_EQ(s, Status::SUCCESS);
+        /*Both calls should returns same amount of data*/
+        ASSERT_EQ(measurements[0].size(), measurements[1].size());
+        /*Check is energy and timestamp are monotonically increasing*/
+        for (int i = 0; i < measurements[0].size(); i++) {
+            int j;
+            for (j = 0; j < measurements[1].size(); j++) {
+                if (measurements[0][i].index == measurements[1][j].index) {
+                    EXPECT_GE(measurements[1][j].timestamp, measurements[0][i].timestamp);
+                    EXPECT_GE(measurements[1][j].energy, measurements[0][i].energy);
+                    break;
+                }
+            }
+            /*Check is indices for two call match*/
+            ASSERT_NE(j, measurements[1].size());
+        }
+    } else if (s == Status::FILESYSTEM_ERROR) {
+        ALOGI("ValidateAllPowerData returned FILESYSTEM_ERROR");
+        ASSERT_EQ(measurements[0].size(), 0);
+    } else if (s == Status::NOT_SUPPORTED) {
+        ALOGI("ValidateAllPowerData returned NOT_SUPPORTED");
+        ASSERT_EQ(measurements[0].size(), 0);
+    } else if (s == Status::INVALID_INPUT) {
+        ALOGI("ValidateAllPowerData returned INVALID_INPUT");
+        ASSERT_EQ(measurements[0].size(), 0);
+    } else if (s == Status::INSUFFICIENT_RESOURCES) {
+        ALOGI("ValidateAllPowerData returned INSUFFICIENT_RESOURCES");
+        ASSERT_EQ(measurements[0].size(), 0);
+    }
+}
+
+TEST_F(PowerStatsHidlTest, ValidateFilteredPowerData) {
+    hidl_vec<RailInfo> rails;
+    hidl_vec<EnergyData> measurements;
+    hidl_vec<uint32_t> indices;
+    std::string debugString;
+    Status s;
+    auto cb = [&rails, &s](hidl_vec<RailInfo> rail_subsys, Status status) {
+        rails = rail_subsys;
+        s = status;
+    };
+    Return<void> ret = service_->getRailInfo(cb);
+    EXPECT_TRUE(ret.isOk());
+    std::time_t seed = std::time(nullptr);
+    std::srand(seed);
+    if (s == Status::SUCCESS) {
+        size_t sz = std::max(1, (int)(std::rand() % rails.size()));
+        indices.resize(sz);
+        for (int i = 0; i < sz; i++) {
+            int j = std::rand() % rails.size();
+            indices[i] = rails[j].index;
+            debugString += std::to_string(indices[i]) + ", ";
+        }
+        debugString += "\n";
+        ALOGI("ValidateFilteredPowerData for indices: %s", debugString.c_str());
+        auto cb = [&measurements, &s](hidl_vec<EnergyData> measure, Status status) {
+            measurements = measure;
+            s = status;
+        };
+        Return<void> ret = service_->getEnergyData(indices, cb);
+        EXPECT_TRUE(ret.isOk());
+        if (s == Status::SUCCESS) {
+            /* Make sure that all the measurements are returned */
+            ASSERT_EQ(sz, measurements.size());
+            for (int i = 0; i < measurements.size(); i++) {
+                int j;
+                bool match = false;
+                /* Check that the measurement belongs to the requested index */
+                for (j = 0; j < indices.size(); j++) {
+                    if (indices[j] == measurements[i].index) {
+                        match = true;
+                        break;
+                    }
+                }
+                ASSERT_TRUE(match);
+            }
+        }
+    } else {
+        /* size should be zero is stats is NOT SUCCESS */
+        ASSERT_EQ(rails.size(), 0);
+    }
+}
+
+void readEnergy(sp<IPowerStats> service_, uint32_t timeMs) {
+    std::unique_ptr<MessageQueueSync> mQueue;
+    Status s;
+    uint32_t railsInSample;
+    uint32_t totalSamples;
+    auto cb = [&s, &mQueue, &totalSamples, &railsInSample](
+                  const hardware::MQDescriptorSync<EnergyData>& in, uint32_t numSamples,
+                  uint32_t railsPerSample, Status status) {
+        mQueue.reset(new (std::nothrow) MessageQueueSync(in));
+        s = status;
+        totalSamples = numSamples;
+        railsInSample = railsPerSample;
+    };
+    service_->streamEnergyData(timeMs, 10, cb);
+    if (s == Status::SUCCESS) {
+        ASSERT_NE(nullptr, mQueue);
+        ASSERT_TRUE(mQueue->isValid());
+        bool rc;
+        int sampleCount = 0;
+        uint32_t totalQuants = railsInSample * totalSamples;
+        uint64_t timeout_ns = 10000000000;
+        if (totalSamples > 0) {
+            uint32_t batch = std::max(1, (int)((std::rand() % totalSamples) * railsInSample));
+            ALOGI("Read energy, timsMs: %u, batch: %u", timeMs, batch);
+            std::vector<EnergyData> data(batch);
+            while (sampleCount < totalQuants) {
+                rc = mQueue->readBlocking(&data[0], batch, timeout_ns);
+                if (rc == false) {
+                    break;
+                }
+                sampleCount = sampleCount + batch;
+                if (batch > totalQuants - sampleCount) {
+                    batch = 1;
+                }
+            }
+            ASSERT_EQ(totalQuants, sampleCount);
+        }
+    } else if (s == Status::FILESYSTEM_ERROR) {
+        ASSERT_FALSE(mQueue->isValid());
+        ASSERT_EQ(totalSamples, 0);
+        ASSERT_EQ(railsInSample, 0);
+    } else if (s == Status::NOT_SUPPORTED) {
+        ASSERT_FALSE(mQueue->isValid());
+        ASSERT_EQ(totalSamples, 0);
+        ASSERT_EQ(railsInSample, 0);
+    } else if (s == Status::INVALID_INPUT) {
+        ASSERT_FALSE(mQueue->isValid());
+        ASSERT_EQ(totalSamples, 0);
+        ASSERT_EQ(railsInSample, 0);
+    } else if (s == Status::INSUFFICIENT_RESOURCES) {
+        ASSERT_FALSE(mQueue->isValid());
+        ASSERT_EQ(totalSamples, 0);
+        ASSERT_EQ(railsInSample, 0);
+    }
+}
+
+TEST_F(PowerStatsHidlTest, StreamEnergyData) {
+    std::time_t seed = std::time(nullptr);
+    std::srand(seed);
+    std::thread thread1 = std::thread(readEnergy, service_, std::rand() % 5000);
+    thread1.join();
+}
+
+int main(int argc, char** argv) {
+    ::testing::AddGlobalTestEnvironment(PowerStatsHidlEnv::Instance());
+    ::testing::InitGoogleTest(&argc, argv);
+    PowerStatsHidlEnv::Instance()->init(&argc, argv);
+    int status = RUN_ALL_TESTS();
+    LOG(INFO) << "Test result = " << status;
+    return status;
+}
+}  // namespace vts
+}  // namespace stats
+}  // namespace power
+}  // namespace android
diff --git a/prebuilt_hashes/26.txt b/prebuilt_hashes/26.txt
new file mode 100644
index 0000000..f2feb4c
--- /dev/null
+++ b/prebuilt_hashes/26.txt
@@ -0,0 +1,186 @@
+# Do not change this file except to add new interfaces. Changing
+# pre-existing interfaces will fail VTS and break framework-only OTAs
+
+# HALs released in Android O
+
+f219c3b5b8c6cb1d659d4c7328f67246abfe1a8613f469826fd3b9ad090417a2 android.hardware.audio@2.0::IDevice
+4d579cae1cd87a783fd49233e10ce720ba183cfd1d5ccd80149e69de5c1c7362 android.hardware.audio@2.0::IDevicesFactory
+203e23f18011390b8cd10c303e0c16c4eebc8fa187e80e40d6be4624c2b0848a android.hardware.audio@2.0::IPrimaryDevice
+aaf93123deec336eb247ad8099849469a541ca0cf7c28c5f5336cebe1ee86748 android.hardware.audio@2.0::IStream
+0468c5723b0d44c5b451bdfa06153000c6f352fd3336e0ad2697127b04b766df android.hardware.audio@2.0::IStreamIn
+7296f7064fd3ab24082b43a1da34cc876268065310b785499fba5178d063680a android.hardware.audio@2.0::IStreamOut
+19d241d71c3e1140afba8140dcb57448446025a5fc03739788c4c25e9a98b6c2 android.hardware.audio@2.0::IStreamOutCallback
+c84da9f586087227daa3b96d42b4575326bccfd5bc8a2a5acf86d774f8ea2648 android.hardware.audio@2.0::types
+1305786c06e22b9b24ebde136054cc827b63c86d8bf4a136d6f7f54752b8566b android.hardware.audio.common@2.0::types
+fa8fbae3d1da3c264e4f3110728076abc09b4e65f12af6ae136367328de988ab android.hardware.audio.effect@2.0::IAcousticEchoCancelerEffect
+ca4752545d54547ff069eae161af7550cb5f5a7e8b60316ddd132a30906a68e7 android.hardware.audio.effect@2.0::IAutomaticGainControlEffect
+d2b8af988dc66f514d886bcee44b440d8034bc2a762f7161717ef3c956073067 android.hardware.audio.effect@2.0::IBassBoostEffect
+611bc09c75e796f3512b1ca6be508b0a9ba996759b8a2c60507784ff58076229 android.hardware.audio.effect@2.0::IDownmixEffect
+36a57369dfdc75180e8b64ae80b1970db8f6d9085dbff6ca931715038cc056e1 android.hardware.audio.effect@2.0::IEffect
+d2aa2df6d189c580f5be8460fa0ff4134d9c05a383f3204659baee426a6f0edf android.hardware.audio.effect@2.0::IEffectBufferProviderCallback
+217f9161983a48d3bf3faeb158f868aa8bf0ce25889e4ee3d2bab1a2e8d33e77 android.hardware.audio.effect@2.0::IEffectsFactory
+c2b38bc07991e880c83ca8cb88181411eeef708b8b936aedd2f2e0acade7df69 android.hardware.audio.effect@2.0::IEnvironmentalReverbEffect
+2ff9f9704be5f167745b4de790e9dafc3cc4719e2f6e2e5497085e679853cfe7 android.hardware.audio.effect@2.0::IEqualizerEffect
+c31447fb02dbc8b56c359941dad22f416511860173c5c5fd278d1bf2312b13de android.hardware.audio.effect@2.0::ILoudnessEnhancerEffect
+804831ca258802eb3eb65a0a7b5d5e3d37d4a15ba8c2836b4276eda98b47e1d0 android.hardware.audio.effect@2.0::INoiseSuppressionEffect
+778fd5b9837f481d8e47425b3e2a3bd0c6362a0b6870291518e2d863530fdb61 android.hardware.audio.effect@2.0::IPresetReverbEffect
+c93cb25a1a92d07aa80a617c01e8d22fc97bf8cefd3962b6a5be386ad4704d89 android.hardware.audio.effect@2.0::IVirtualizerEffect
+918f331780c9c7b04f2151a2e563aab088198ede8e6f865302ebaa13905bd9ce android.hardware.audio.effect@2.0::IVisualizerEffect
+4caad099f8fc00262b6c03ba41271808b37cea90ac98b534299bbf4ee823af02 android.hardware.audio.effect@2.0::types
+# android.hardware.automotive.* are unfrozen
+1fbdc1f852f8bd2e4a6c5cb30ac2b78668c98dce118a61762d4034ae859f43d8 android.hardware.biometrics.fingerprint@2.1::IBiometricsFingerprint
+aabb5c3c585592d71ee57b77298c14993d77914ddeaa64b2c5109a602b02ea47 android.hardware.biometrics.fingerprint@2.1::IBiometricsFingerprintClientCallback
+1ec60d4efddae9a7b2469278a576967b4751e88de5b8d7e9df6eff6bc0da7bc9 android.hardware.biometrics.fingerprint@2.1::types
+347ce746815607567f5f3b53e4800998ca5ab9355141f0880fc0cf0c1fc5c355 android.hardware.bluetooth@1.0::IBluetoothHci
+835f41be2281bfb22f3e33c6fa870bde7bc21e37e5cfbaf9a36fff170632f754 android.hardware.bluetooth@1.0::IBluetoothHciCallbacks
+a8dfd0dbe463a3cdbcf1d985b38a28b3d93ba2ae5a1d1db4aaef4c38a5781b91 android.hardware.bluetooth@1.0::types
+7192d756aeba00aba32f4504981df8172ffca83e210c4838dabf295e53e93590 android.hardware.boot@1.0::IBootControl
+cebaa803b8e33807a0d69f46652b650ccb549e8f9b19d6becbbf26690e828b49 android.hardware.boot@1.0::types
+a98d49f23712a7cc327d1e0602d05f6f3ad32cfb5c74711d009c726611ee1c93 android.hardware.broadcastradio@1.0::IBroadcastRadio
+ed82579c0c165feaa12d0e33c06b3342ab41ec0a439247f202775e8369e46ef6 android.hardware.broadcastradio@1.0::IBroadcastRadioFactory
+da6ab32ee2793d2c86d3b603075d5383852b89d7eaa201861aa0473d418f3c7f android.hardware.broadcastradio@1.0::ITuner
+04d3ca022e25c308d9efd2e7eb77b3a7a206907cdc1b9ea9326340b377868172 android.hardware.broadcastradio@1.0::ITunerCallback
+bd42c8d7838cfed1998b49c39745dec116d2d6edc2c11a4c0399b8f3a1d1655a android.hardware.broadcastradio@1.0::types
+81164323115d6588e259e8319fddf7487adfa1f49ce60f7e80ba74e0783392a4 android.hardware.camera.common@1.0::types
+c1705e9d62438a1d955269965af915ae28e692bd480a3b1ce67056fef992d62f android.hardware.camera.device@1.0::ICameraDevice
+78e9b44cf8660bdc1e98dca07451804153824efcd28db208a62f5ad728f44076 android.hardware.camera.device@1.0::ICameraDeviceCallback
+28f0386ba86ddf41e53a8117b48a0328d7a4d2574213e89f4a1062398a244566 android.hardware.camera.device@1.0::ICameraDevicePreviewCallback
+4db48439ce9dde97f1cfb3d7408f6c737f621ac0f7494aeea35ed599bc2352a3 android.hardware.camera.device@1.0::types
+b32f9aeaf1c442195eb06ffc7600968c919d005b2718874f09c57287fae55918 android.hardware.camera.device@3.2::ICameraDevice
+63bfc3da0f2d2301f7a0508c7c2b9ffc521d4d545ee03718da70e9d6273b3b21 android.hardware.camera.device@3.2::ICameraDeviceCallback
+0fa3e1e64819283b8737fc4e5ab759f0cb4ac1a996e8a51cc4aa8025a457208e android.hardware.camera.device@3.2::ICameraDeviceSession
+030be3d2b159cbde7920485807140f6b6064ef4a5de4a40a6c4bc8d2c72f7cd3 android.hardware.camera.device@3.2::types
+5ba7947cee515d7a2359bfcbfb9678c1c3a768c288471919ac095b96ae6f3d40 android.hardware.camera.metadata@3.2::types
+f7e299d85033ac52d1095a35784fcfeaff43603f58c751e4153c85bbade3b330 android.hardware.camera.provider@2.4::ICameraProvider
+a501ca1aecd09f1b9fd70a9af84205430dbd49a808e8fa395d363b9902e6f58c android.hardware.camera.provider@2.4::ICameraProviderCallback
+7f5fe8f4f8a24037153c504d8b4d3313c2ce33d81c8c69fe5194ddd2d4080e72 android.hardware.configstore@1.0::ISurfaceFlingerConfigs
+87beacc481897cf02fb1628d75e68133de6d74d4cffe582cda2f5e16bdd74516 android.hardware.configstore@1.0::types
+a5ae0fe8667f0b1af09b13e72d29600f4eb3853b257079c45a99b6f4a3360649 android.hardware.contexthub@1.0::IContexthub
+2ab3054c2d9302d8417ee7495353a2887fe338f913276f2eb41e80f11395ec2e android.hardware.contexthub@1.0::IContexthubCallback
+c3b2b37d561d31ea094411f251bf73bea334f4fe849a4390aef5e20bca6cadba android.hardware.contexthub@1.0::types
+df174c1871c864b4c79ca9f64aae7936d24a272eca3191a30458ca2b706dec79 android.hardware.drm@1.0::ICryptoFactory
+83639e90caeb996b0274e420de3cd556779de1ca48464b68eee799bef32b34cd android.hardware.drm@1.0::ICryptoPlugin
+1440cffdfaeb12830ac10ee6ffdb0f1083e701057b806df11fb4787b4c91e718 android.hardware.drm@1.0::IDrmFactory
+78ba33b108f620e6a0eec01ef654547e69a85754578ea4c9ef03ec205f16121c android.hardware.drm@1.0::IDrmPlugin
+701d9e51952172364e4ea70db9c397f08c3b4577ba33051f050a6cdd532de1b4 android.hardware.drm@1.0::IDrmPluginListener
+4238d62ad90df63aa338c6f1b6264c09c5a3706945d5c49d1189c0be1dc9e942 android.hardware.drm@1.0::types
+f07b1ee3ba11a2fc9f200421b2e1afb7c1854ee987000e45c987fb9507795055 android.hardware.dumpstate@1.0::IDumpstateDevice
+c9d318df7922bde3b265927b521ff5a965002826fc0cabfcaef52a56760f2d34 android.hardware.gatekeeper@1.0::IGatekeeper
+da13bd69282fb275767abb18704c57ff8038e6c139ad17157dc702810f70d06a android.hardware.gatekeeper@1.0::types
+37c7da4f823ec958dfa9c960e2d341c48f877e0bfa758f3fa9e2d9c1e1bd66d9 android.hardware.gnss@1.0::IAGnss
+7ec9afdb964bfb8369866913caf018f2636592885bcb558a65de2c5436ab4f60 android.hardware.gnss@1.0::IAGnssCallback
+d16e6a359be6963ea753d7138e84ecf2b93052097938938c4d36d7a47ea2e2ae android.hardware.gnss@1.0::IAGnssRil
+2f907708d74d94b1e121ed27651c9c72af65952d347b58ff07dac5d5d7a7f678 android.hardware.gnss@1.0::IAGnssRilCallback
+5ac7edad06d76064b882be161f3f9d9692a997ec72e9f36addb7fe8918f49992 android.hardware.gnss@1.0::IGnss
+b05c983c87c3376e145223688c3b541b5e11b827f211e38d5a31af1ca3a2e222 android.hardware.gnss@1.0::IGnssBatching
+4981d2d2c4e725c7544be0956099a91fc7bbc8048c563394158083fe924e651e android.hardware.gnss@1.0::IGnssBatchingCallback
+3cd22d92cc1f935150c5048310e84886f14eed2556e8f00636733d204045cc4f android.hardware.gnss@1.0::IGnssCallback
+175185a5eda87476193ca5461df75dd16d36664591e8130530dd8ef0eb2ddf6a android.hardware.gnss@1.0::IGnssConfiguration
+4542122b96fbf27101cb8222bafb76e7c8d032d977dd1058edd8e5881ca5752f android.hardware.gnss@1.0::IGnssDebug
+e6dd0c8416e523ab9cbd14d56ab6f016481a8aef3bc8a750051122d31075f6c7 android.hardware.gnss@1.0::IGnssGeofenceCallback
+f90e4ddc652706299d8e3d8ba18e0745c3bae9bf4d1be6bd06d9c1f50ec8d28a android.hardware.gnss@1.0::IGnssGeofencing
+9ea8987bb1089c8c5d7b67866575b866ef516045021d9efcc37c6352bce072a3 android.hardware.gnss@1.0::IGnssMeasurement
+cf20492673d6a423e4c2e87fdfb5a4c4a602431721978db852e246f258e25edb android.hardware.gnss@1.0::IGnssMeasurementCallback
+af85aa0f48ae99a39f4688c344e4419304f681f9af818a5c8d759286fc4418de android.hardware.gnss@1.0::IGnssNavigationMessage
+76b0874ea4c06b29f66418c59820f4286b3be9629cd872923d0dfbb602cd432d android.hardware.gnss@1.0::IGnssNavigationMessageCallback
+248bcf51da4273d64f367bf6877baef2feeaca365459842fd3c214a2dc6e0224 android.hardware.gnss@1.0::IGnssNi
+c781b7b125f68be5db8a8c3d412d526acdbdf77dcc592a4c0ed70b8ce4fe6c49 android.hardware.gnss@1.0::IGnssNiCallback
+c1142657de16fdb292a502372fe938614d65270ab8359217d6e13604fe4dbca4 android.hardware.gnss@1.0::IGnssXtra
+bd366b83d8d565d0e8bfabff3adfcab0259d75b4e2a9f8e1b91e11d1593a2ffb android.hardware.gnss@1.0::IGnssXtraCallback
+881bc2f94026784d194cffbff166c6e8bf911de4e02abe96fc7d89ec75b0574a android.hardware.gnss@1.0::types
+17971eb8a482893dadcfc16e0583f492d42a034ef95d9b0b709417af30838396 android.hardware.graphics.allocator@2.0::IAllocator
+60bf42a4898e4fb70dbd720b263aeafd7f35f5e1a5effeabb4d5d659878a5f18 android.hardware.graphics.bufferqueue@1.0::IGraphicBufferProducer
+b8a75617b9ec12bea641f3a73d4025a33e8b9a2f9169dd46094af56adf9249c5 android.hardware.graphics.bufferqueue@1.0::IProducerListener
+4f6dedbcdd21c309dfc650acea81a096d6b242493ffe49c8d61bd3c43aad354e android.hardware.graphics.common@1.0::types
+b3aac6c3817f039964fcd62268274b3039e17bd7d0d5b40b4d1d1c7b19a1f866 android.hardware.graphics.composer@2.1::IComposer
+b19d00eb8a8b3b0034a0321f22e8f32162bf4c2aebbce6da22c025f56e459ea2 android.hardware.graphics.composer@2.1::IComposerCallback
+61ee43ffe6fb6dbe8b22dc17c51ff3d5ba703fc6029cba211f901f3d79c8a72d android.hardware.graphics.composer@2.1::IComposerClient
+1c98c2f5154345312ec054871792a2982ec5f3e2bc2abfb61a10c0b517978e20 android.hardware.graphics.composer@2.1::types
+a695898589e1ef15b2b2510f11edd6aafac9918d9cf8d74b4b6143b309dee542 android.hardware.graphics.mapper@2.0::IMapper
+28507d385a3dd224bf3c32f1bfd9f96092c4701b9c1cc66caa578fc3efc97877 android.hardware.graphics.mapper@2.0::types
+91e2ba3805c923f01fc1231ec9ff838942aee3346f2d7614ecc0caeadbe57ed4 android.hardware.health@1.0::IHealth
+1275aa2e8732909101b26aec49ed2285489e89d97b8610a8908b7868e35a3cc5 android.hardware.health@1.0::types
+3a8d3922e06e6d4f8e0befc6be78d0e9e07aed1585b3da6521bed406d25a9483 android.hardware.ir@1.0::IConsumerIr
+7090bd37912fcf723a12f4bc17783e3527577c4944805a028c296fd7a95bd682 android.hardware.ir@1.0::types
+cc7925a78c0ab022515f48840d3dae76f384ed3a1287abadcb461a5cd5396163 android.hardware.keymaster@3.0::IKeymasterDevice
+822998d7bb76f0cd719a409291434fcb56e6d50bc4780788bb157a3374d63b8c android.hardware.keymaster@3.0::types
+d4ed2f0e14f9e914d0b1275d2e0363192fe30aca9059c84edb5fad15995f9ec4 android.hardware.light@2.0::ILight
+d9584bfcaedd6e62cf337881748246b23e36cbc2bc3aa84c01b6a1e622061400 android.hardware.light@2.0::types
+16c0cf0f73de1e5208a95020c6c6474903e7094f76b2d782651afaca0e5fd86f android.hardware.media@1.0::types
+8bc2f5fdcad68856eb61a62fe4cc043fa064bb7f1dab95a71d1918ec1eef7b55 android.hardware.media.omx@1.0::IGraphicBufferSource
+0d3de9cd89d4718ea3b772f2d8b93be004feb3abb7e7dc5402e37047cc730d05 android.hardware.media.omx@1.0::IOmx
+32002e1c358c64de106c977a6dc6af7da27be4803a5bb66fd6f891a5ba0a1617 android.hardware.media.omx@1.0::IOmxBufferSource
+81ad8d8bb1cf6f41923cf11dd39354a8fe433db284a234cc675de7e75a82224c android.hardware.media.omx@1.0::IOmxNode
+494c0c8bf6065edc82ec127228ed19dd2243dc1c2f7d601c7c6be7b7015c1713 android.hardware.media.omx@1.0::IOmxObserver
+252c2fc50c78fd6de8365e5b60e5115119ace107db0b94b0b26815cbf3d2b64a android.hardware.media.omx@1.0::IOmxStore
+148c1b50b0958988373145ffdf5fa0e1b6534e0a2034a570e74b15c127cf7c5e android.hardware.media.omx@1.0::types
+c66902fe48d687ac6740a3e32ae55fb75532c48c36c6386461c2b4416ad2e0f1 android.hardware.memtrack@1.0::IMemtrack
+860bacd8b11a269c40567542b613fe4ca448d5cb4326d0058899e608e89dfca1 android.hardware.memtrack@1.0::types
+07ac2dc95270321ec7d4c33cd25e5085a057f47fe350d645af6f7a7a11e3cf57 android.hardware.nfc@1.0::INfc
+f2fe54426c07d67388d4774a60641ad4c0538f22eb6e1111722f231772655de6 android.hardware.nfc@1.0::INfcClientCallback
+9626fd18db113d709faf593a70caf19bd0980294d23c468c80c30186f9d298a6 android.hardware.nfc@1.0::types
+deee1dc4948f33af207e1008aba0f6cc07afb7900eab53f33192c8cac137eefc android.hardware.power@1.0::IPower
+efc83df3f962b93c7c0290d691d7d300dabe12683e2cde3591fb3c0beedce20f android.hardware.power@1.0::types
+9b5aa499ec3b4226f15f48f5ed08896e2fc0676f978c9e199c1da21daaf002a6 android.hardware.radio@1.0::IRadio
+5c8efbb9c451a59737ed2c6c20230aae4745839ca01d8088d6dcc9020e52d2c5 android.hardware.radio@1.0::IRadioIndication
+69f6b4b8ec40ca02ccc7bb8227a097135c20c00bd94c822e421cd9af1267252c android.hardware.radio@1.0::IRadioResponse
+de3ab9f73b1073cd677b19d886fb927e9381b30161a704712d2b30f875873f5c android.hardware.radio@1.0::ISap
+d183e406ef0897df2117a9dde384e8e6ea4fa6ab1c7f6f28e65b87011218c9ea android.hardware.radio@1.0::ISapCallback
+96986fbd22f0e6ca752e1fcdc0a64bda213995a81f5f36bc4faf3532d9306b97 android.hardware.radio@1.0::types
+00f70085d6fae1d482fb700a3fd42ed475384c95b51c9269b9ae5037b74ad4dd android.hardware.radio.deprecated@1.0::IOemHook
+06837b6d7e843cfa9cd20fed4070feca7a9b5c81a9ed643bf7d06803455a9816 android.hardware.radio.deprecated@1.0::IOemHookIndication
+6fd4874f0eddd4626a27658fd94fad526c317f3563439e79718bdb1a3a2309d5 android.hardware.radio.deprecated@1.0::IOemHookResponse
+6983a2cafe39d5c57dfdc1743055fb0f757a0df8c78e00423d5e1810836927e1 android.hardware.renderscript@1.0::IContext
+7f9417a0ccf78ea042ec7a8ac8e3750346d4d9d7e5ae01b1b35fde303f47c24d android.hardware.renderscript@1.0::IDevice
+fc6f325b266b32353f7d1534fbe58e0d368265a12b77fa396fb556e8c443f739 android.hardware.renderscript@1.0::types
+89585ff541c319de4091a5a0b687dd526ac81c6382ffd7b979a4164b3d7419a6 android.hardware.sensors@1.0::ISensors
+e04ab978fc28f4c515f4a75617dfda8607733a64f13666beeb0e604a07a39333 android.hardware.sensors@1.0::types
+5befc019cbe94953661e2cdb95e3cf64f5e565c29403e1c2daecc2be44e0a55c android.hardware.soundtrigger@2.0::ISoundTriggerHw
+d7ec5f612a5e0a59ea4f2b61317e208ff56dd50920fd4eb441e0cbc8f97e4f49 android.hardware.soundtrigger@2.0::ISoundTriggerHwCallback
+5bee9e70f7e5ec7ee252883b28f98f12b59960f4c2a0b4cc9a4526e4669ebcd4 android.hardware.soundtrigger@2.0::types
+97f1ec446043bc5a6645b74529a6276496bdb35e0aee41eda55cb92d51eb7802 android.hardware.thermal@1.0::IThermal
+84965a6908bceb4ef51546bf8731f309f1ea9d09a0177dcc7974132e523dd6d2 android.hardware.thermal@1.0::types
+938850621c3c5ef426a4b88e752ba99b3559037e782a3d938604f3aef5cc0f1b android.hardware.tv.cec@1.0::IHdmiCec
+e75b6eea711d36fac678bce072b3cec6544b27fa9f4cd903999404e5c110ca10 android.hardware.tv.cec@1.0::IHdmiCecCallback
+6e25f8dbfadb668e1d4ec80eb9acd95d8bc9e0a240c36d27e662adb440314b95 android.hardware.tv.cec@1.0::types
+0cafa3c8388e9631916d2d800f78decbcec2904f11415b32c71a31d9a51ebf79 android.hardware.tv.input@1.0::ITvInput
+dee83e5c864fbbee8f02448d0800be32f06856386b9f907bc5d952208c9434f9 android.hardware.tv.input@1.0::ITvInputCallback
+07aab30410b612381234dca6d453d4ab96f2e536368715717c6e28101b9851b5 android.hardware.tv.input@1.0::types
+4ef57499273f38bdbdd0c15e56ee7a4bc5f18a5644092170a531df3541d9e015 android.hardware.usb@1.0::IUsb
+4be7881e411ba42784bf5b7354c14ae0cf161004d39433aaecaab0d19ea99354 android.hardware.usb@1.0::IUsbCallback
+f7e6e747910a3cd0a35846141e3b990a6a612a297b2b70ccd5740b646a450a8c android.hardware.usb@1.0::types
+06ea64cc3565777f3b259e400ffa7100d07f3827ad9357b0c5d3c651384e5553 android.hardware.vibrator@1.0::IVibrator
+0fecd34ae64f32eff6aa615fd662349242c0b8b6e303ef05a7cb5776c732f413 android.hardware.vibrator@1.0::types
+4b962968a7df4ab104d1315d66a0a7348a713fecbb5d2c1b23688494458f37ce android.hardware.vr@1.0::IVr
+b9be36719a8ad534000a51ea07be91be94c405bf1e038ae825acf65087ffd378 android.hardware.wifi@1.0::IWifi
+ee0224ee18813506d9d6f13d8c8e4679f053c290a443a52a7c52a5d3c852262b android.hardware.wifi@1.0::IWifiApIface
+f3eecc489deb4c74892f59eb7adb769063bd5c354ac132b626a5f42b363d36bc android.hardware.wifi@1.0::IWifiChip
+a1b988377645a58e5e2542ca2bad4e17c21a4a389213d05de2f0e32d57b7d339 android.hardware.wifi@1.0::IWifiChipEventCallback
+5ed6760ce77e84bc6c49d1acb3f7d8117c9176b3f06514bc44ad3af84c80dcfe android.hardware.wifi@1.0::IWifiEventCallback
+6b9ad43a5efbe6ca214f751e22ce43cf5cd4d5d5f2cba80f24ccd3755a72401c android.hardware.wifi@1.0::IWifiIface
+ba5aa74f1ba714f0093864227923492808795bda6199c4ea0891322d27f8c931 android.hardware.wifi@1.0::IWifiNanIface
+325c94f3e1a565b56bbc74faddbd0ba7cb824f263dccf9dfff2daf62b86ed774 android.hardware.wifi@1.0::IWifiNanIfaceEventCallback
+c2c3f0372b41780fb6dfe83c022296806c2024d7046682fd201de5aa9b791c7a android.hardware.wifi@1.0::IWifiP2pIface
+766e9765f5c9c759b2a763c2288353fb5deff3389c2cc28f81d79c939704ce8b android.hardware.wifi@1.0::IWifiRttController
+72ab6f3e120cbf07aa6f8e87ca89112bdeb36b7fbb96bce5af3712323ab8b8e6 android.hardware.wifi@1.0::IWifiRttControllerEventCallback
+3b8093d39ef1e10e43c5538afbf5ff6e39b8d8168ebbe1998d993e89e25f14a5 android.hardware.wifi@1.0::IWifiStaIface
+7fbfc551c3e23c8b4398c3e16e452b516457e6921424a53474cbf373ca306fa9 android.hardware.wifi@1.0::IWifiStaIfaceEventCallback
+e20d5132d6d23e072c15de065b5e2aa13ff965031246a2c82581732bae56bf6d android.hardware.wifi@1.0::types
+f7e55c08187d8c855068a1ee3d0c8daeee7570292d96509c21a8756d4f5cfb9b android.hardware.wifi.supplicant@1.0::ISupplicant
+56b5c7267cb3d3337f44eb8b0b38ff4c6260dcc70e07687fcab94b1ccea8d159 android.hardware.wifi.supplicant@1.0::ISupplicantCallback
+35ba7bcdf18f24a866a7e5429548f06768bb20a257f75b10a397c4d825ef8438 android.hardware.wifi.supplicant@1.0::ISupplicantIface
+cda01008c06922fa37c1213e9bb831a109b3174532805616fb7161edc403866f android.hardware.wifi.supplicant@1.0::ISupplicantNetwork
+4907410338c5e8dbeec4b5edc2608ea323f5561945f8810af81810c47b019184 android.hardware.wifi.supplicant@1.0::ISupplicantP2pIface
+8b63f5efa2e3be3a7cb8a428760d82285a4ab79bcbdea6ef90aa547555e582d4 android.hardware.wifi.supplicant@1.0::ISupplicantP2pIfaceCallback
+56128f74560571b6777d59453f35c6b35693ee377e2a23c807708906928f09de android.hardware.wifi.supplicant@1.0::ISupplicantP2pNetwork
+2067c22197bca9743dab66a6f561a8a8375c67b4f76aed05f776839499bd4c8f android.hardware.wifi.supplicant@1.0::ISupplicantP2pNetworkCallback
+7752e1de93aaf5fed37011c219ac247069f6af320b0810daa98510584a10e7b4 android.hardware.wifi.supplicant@1.0::ISupplicantStaIface
+d781c8d7e7b3fe5cca8cf6e1d8806e770982ae5358c7816ed51b0f0ec272e70d android.hardware.wifi.supplicant@1.0::ISupplicantStaIfaceCallback
+b12ef0bdd8a4d247a8a6e960b227ed32383f2b0241f55d67fcea6eff6a6737fa android.hardware.wifi.supplicant@1.0::ISupplicantStaNetwork
+d8f0877ae1d321c1d884c7631dfe36cab0ec8a4b2863d4b687f85d3549a63bcc android.hardware.wifi.supplicant@1.0::ISupplicantStaNetworkCallback
+fe3c3c2f572b72f15f8594c538b0577bd5c28722c31879cfe6231330cddb6747 android.hardware.wifi.supplicant@1.0::types
+
+# ABI preserving changes to HALs released in Android O
+
+78589343d8ee2e1b155acad3fbdc7fcbb6af94491aee968b2383c21627264f8b android.hardware.radio@1.0::IRadioResponse
+c2c50ec74c87a583c683b4493f8f9f2e454a8d41c57af5b3eb88823a999f0ea4 android.hardware.radio@1.0::IRadioResponse
diff --git a/prebuilt_hashes/27.txt b/prebuilt_hashes/27.txt
new file mode 100644
index 0000000..23f2004
--- /dev/null
+++ b/prebuilt_hashes/27.txt
@@ -0,0 +1,249 @@
+# Do not change this file except to add new interfaces. Changing
+# pre-existing interfaces will fail VTS and break framework-only OTAs
+
+# HALs released in Android O
+
+f219c3b5b8c6cb1d659d4c7328f67246abfe1a8613f469826fd3b9ad090417a2 android.hardware.audio@2.0::IDevice
+4d579cae1cd87a783fd49233e10ce720ba183cfd1d5ccd80149e69de5c1c7362 android.hardware.audio@2.0::IDevicesFactory
+203e23f18011390b8cd10c303e0c16c4eebc8fa187e80e40d6be4624c2b0848a android.hardware.audio@2.0::IPrimaryDevice
+aaf93123deec336eb247ad8099849469a541ca0cf7c28c5f5336cebe1ee86748 android.hardware.audio@2.0::IStream
+0468c5723b0d44c5b451bdfa06153000c6f352fd3336e0ad2697127b04b766df android.hardware.audio@2.0::IStreamIn
+7296f7064fd3ab24082b43a1da34cc876268065310b785499fba5178d063680a android.hardware.audio@2.0::IStreamOut
+19d241d71c3e1140afba8140dcb57448446025a5fc03739788c4c25e9a98b6c2 android.hardware.audio@2.0::IStreamOutCallback
+c84da9f586087227daa3b96d42b4575326bccfd5bc8a2a5acf86d774f8ea2648 android.hardware.audio@2.0::types
+1305786c06e22b9b24ebde136054cc827b63c86d8bf4a136d6f7f54752b8566b android.hardware.audio.common@2.0::types
+fa8fbae3d1da3c264e4f3110728076abc09b4e65f12af6ae136367328de988ab android.hardware.audio.effect@2.0::IAcousticEchoCancelerEffect
+ca4752545d54547ff069eae161af7550cb5f5a7e8b60316ddd132a30906a68e7 android.hardware.audio.effect@2.0::IAutomaticGainControlEffect
+d2b8af988dc66f514d886bcee44b440d8034bc2a762f7161717ef3c956073067 android.hardware.audio.effect@2.0::IBassBoostEffect
+611bc09c75e796f3512b1ca6be508b0a9ba996759b8a2c60507784ff58076229 android.hardware.audio.effect@2.0::IDownmixEffect
+36a57369dfdc75180e8b64ae80b1970db8f6d9085dbff6ca931715038cc056e1 android.hardware.audio.effect@2.0::IEffect
+d2aa2df6d189c580f5be8460fa0ff4134d9c05a383f3204659baee426a6f0edf android.hardware.audio.effect@2.0::IEffectBufferProviderCallback
+217f9161983a48d3bf3faeb158f868aa8bf0ce25889e4ee3d2bab1a2e8d33e77 android.hardware.audio.effect@2.0::IEffectsFactory
+c2b38bc07991e880c83ca8cb88181411eeef708b8b936aedd2f2e0acade7df69 android.hardware.audio.effect@2.0::IEnvironmentalReverbEffect
+2ff9f9704be5f167745b4de790e9dafc3cc4719e2f6e2e5497085e679853cfe7 android.hardware.audio.effect@2.0::IEqualizerEffect
+c31447fb02dbc8b56c359941dad22f416511860173c5c5fd278d1bf2312b13de android.hardware.audio.effect@2.0::ILoudnessEnhancerEffect
+804831ca258802eb3eb65a0a7b5d5e3d37d4a15ba8c2836b4276eda98b47e1d0 android.hardware.audio.effect@2.0::INoiseSuppressionEffect
+778fd5b9837f481d8e47425b3e2a3bd0c6362a0b6870291518e2d863530fdb61 android.hardware.audio.effect@2.0::IPresetReverbEffect
+c93cb25a1a92d07aa80a617c01e8d22fc97bf8cefd3962b6a5be386ad4704d89 android.hardware.audio.effect@2.0::IVirtualizerEffect
+918f331780c9c7b04f2151a2e563aab088198ede8e6f865302ebaa13905bd9ce android.hardware.audio.effect@2.0::IVisualizerEffect
+4caad099f8fc00262b6c03ba41271808b37cea90ac98b534299bbf4ee823af02 android.hardware.audio.effect@2.0::types
+# android.hardware.automotive.* are unfrozen
+1fbdc1f852f8bd2e4a6c5cb30ac2b78668c98dce118a61762d4034ae859f43d8 android.hardware.biometrics.fingerprint@2.1::IBiometricsFingerprint
+aabb5c3c585592d71ee57b77298c14993d77914ddeaa64b2c5109a602b02ea47 android.hardware.biometrics.fingerprint@2.1::IBiometricsFingerprintClientCallback
+1ec60d4efddae9a7b2469278a576967b4751e88de5b8d7e9df6eff6bc0da7bc9 android.hardware.biometrics.fingerprint@2.1::types
+347ce746815607567f5f3b53e4800998ca5ab9355141f0880fc0cf0c1fc5c355 android.hardware.bluetooth@1.0::IBluetoothHci
+835f41be2281bfb22f3e33c6fa870bde7bc21e37e5cfbaf9a36fff170632f754 android.hardware.bluetooth@1.0::IBluetoothHciCallbacks
+a8dfd0dbe463a3cdbcf1d985b38a28b3d93ba2ae5a1d1db4aaef4c38a5781b91 android.hardware.bluetooth@1.0::types
+7192d756aeba00aba32f4504981df8172ffca83e210c4838dabf295e53e93590 android.hardware.boot@1.0::IBootControl
+cebaa803b8e33807a0d69f46652b650ccb549e8f9b19d6becbbf26690e828b49 android.hardware.boot@1.0::types
+a98d49f23712a7cc327d1e0602d05f6f3ad32cfb5c74711d009c726611ee1c93 android.hardware.broadcastradio@1.0::IBroadcastRadio
+ed82579c0c165feaa12d0e33c06b3342ab41ec0a439247f202775e8369e46ef6 android.hardware.broadcastradio@1.0::IBroadcastRadioFactory
+da6ab32ee2793d2c86d3b603075d5383852b89d7eaa201861aa0473d418f3c7f android.hardware.broadcastradio@1.0::ITuner
+04d3ca022e25c308d9efd2e7eb77b3a7a206907cdc1b9ea9326340b377868172 android.hardware.broadcastradio@1.0::ITunerCallback
+bd42c8d7838cfed1998b49c39745dec116d2d6edc2c11a4c0399b8f3a1d1655a android.hardware.broadcastradio@1.0::types
+81164323115d6588e259e8319fddf7487adfa1f49ce60f7e80ba74e0783392a4 android.hardware.camera.common@1.0::types
+c1705e9d62438a1d955269965af915ae28e692bd480a3b1ce67056fef992d62f android.hardware.camera.device@1.0::ICameraDevice
+78e9b44cf8660bdc1e98dca07451804153824efcd28db208a62f5ad728f44076 android.hardware.camera.device@1.0::ICameraDeviceCallback
+28f0386ba86ddf41e53a8117b48a0328d7a4d2574213e89f4a1062398a244566 android.hardware.camera.device@1.0::ICameraDevicePreviewCallback
+4db48439ce9dde97f1cfb3d7408f6c737f621ac0f7494aeea35ed599bc2352a3 android.hardware.camera.device@1.0::types
+b32f9aeaf1c442195eb06ffc7600968c919d005b2718874f09c57287fae55918 android.hardware.camera.device@3.2::ICameraDevice
+63bfc3da0f2d2301f7a0508c7c2b9ffc521d4d545ee03718da70e9d6273b3b21 android.hardware.camera.device@3.2::ICameraDeviceCallback
+0fa3e1e64819283b8737fc4e5ab759f0cb4ac1a996e8a51cc4aa8025a457208e android.hardware.camera.device@3.2::ICameraDeviceSession
+030be3d2b159cbde7920485807140f6b6064ef4a5de4a40a6c4bc8d2c72f7cd3 android.hardware.camera.device@3.2::types
+5ba7947cee515d7a2359bfcbfb9678c1c3a768c288471919ac095b96ae6f3d40 android.hardware.camera.metadata@3.2::types
+f7e299d85033ac52d1095a35784fcfeaff43603f58c751e4153c85bbade3b330 android.hardware.camera.provider@2.4::ICameraProvider
+a501ca1aecd09f1b9fd70a9af84205430dbd49a808e8fa395d363b9902e6f58c android.hardware.camera.provider@2.4::ICameraProviderCallback
+7f5fe8f4f8a24037153c504d8b4d3313c2ce33d81c8c69fe5194ddd2d4080e72 android.hardware.configstore@1.0::ISurfaceFlingerConfigs
+87beacc481897cf02fb1628d75e68133de6d74d4cffe582cda2f5e16bdd74516 android.hardware.configstore@1.0::types
+a5ae0fe8667f0b1af09b13e72d29600f4eb3853b257079c45a99b6f4a3360649 android.hardware.contexthub@1.0::IContexthub
+2ab3054c2d9302d8417ee7495353a2887fe338f913276f2eb41e80f11395ec2e android.hardware.contexthub@1.0::IContexthubCallback
+c3b2b37d561d31ea094411f251bf73bea334f4fe849a4390aef5e20bca6cadba android.hardware.contexthub@1.0::types
+df174c1871c864b4c79ca9f64aae7936d24a272eca3191a30458ca2b706dec79 android.hardware.drm@1.0::ICryptoFactory
+83639e90caeb996b0274e420de3cd556779de1ca48464b68eee799bef32b34cd android.hardware.drm@1.0::ICryptoPlugin
+1440cffdfaeb12830ac10ee6ffdb0f1083e701057b806df11fb4787b4c91e718 android.hardware.drm@1.0::IDrmFactory
+78ba33b108f620e6a0eec01ef654547e69a85754578ea4c9ef03ec205f16121c android.hardware.drm@1.0::IDrmPlugin
+701d9e51952172364e4ea70db9c397f08c3b4577ba33051f050a6cdd532de1b4 android.hardware.drm@1.0::IDrmPluginListener
+4238d62ad90df63aa338c6f1b6264c09c5a3706945d5c49d1189c0be1dc9e942 android.hardware.drm@1.0::types
+f07b1ee3ba11a2fc9f200421b2e1afb7c1854ee987000e45c987fb9507795055 android.hardware.dumpstate@1.0::IDumpstateDevice
+c9d318df7922bde3b265927b521ff5a965002826fc0cabfcaef52a56760f2d34 android.hardware.gatekeeper@1.0::IGatekeeper
+da13bd69282fb275767abb18704c57ff8038e6c139ad17157dc702810f70d06a android.hardware.gatekeeper@1.0::types
+37c7da4f823ec958dfa9c960e2d341c48f877e0bfa758f3fa9e2d9c1e1bd66d9 android.hardware.gnss@1.0::IAGnss
+7ec9afdb964bfb8369866913caf018f2636592885bcb558a65de2c5436ab4f60 android.hardware.gnss@1.0::IAGnssCallback
+d16e6a359be6963ea753d7138e84ecf2b93052097938938c4d36d7a47ea2e2ae android.hardware.gnss@1.0::IAGnssRil
+2f907708d74d94b1e121ed27651c9c72af65952d347b58ff07dac5d5d7a7f678 android.hardware.gnss@1.0::IAGnssRilCallback
+5ac7edad06d76064b882be161f3f9d9692a997ec72e9f36addb7fe8918f49992 android.hardware.gnss@1.0::IGnss
+b05c983c87c3376e145223688c3b541b5e11b827f211e38d5a31af1ca3a2e222 android.hardware.gnss@1.0::IGnssBatching
+4981d2d2c4e725c7544be0956099a91fc7bbc8048c563394158083fe924e651e android.hardware.gnss@1.0::IGnssBatchingCallback
+3cd22d92cc1f935150c5048310e84886f14eed2556e8f00636733d204045cc4f android.hardware.gnss@1.0::IGnssCallback
+175185a5eda87476193ca5461df75dd16d36664591e8130530dd8ef0eb2ddf6a android.hardware.gnss@1.0::IGnssConfiguration
+4542122b96fbf27101cb8222bafb76e7c8d032d977dd1058edd8e5881ca5752f android.hardware.gnss@1.0::IGnssDebug
+e6dd0c8416e523ab9cbd14d56ab6f016481a8aef3bc8a750051122d31075f6c7 android.hardware.gnss@1.0::IGnssGeofenceCallback
+f90e4ddc652706299d8e3d8ba18e0745c3bae9bf4d1be6bd06d9c1f50ec8d28a android.hardware.gnss@1.0::IGnssGeofencing
+9ea8987bb1089c8c5d7b67866575b866ef516045021d9efcc37c6352bce072a3 android.hardware.gnss@1.0::IGnssMeasurement
+cf20492673d6a423e4c2e87fdfb5a4c4a602431721978db852e246f258e25edb android.hardware.gnss@1.0::IGnssMeasurementCallback
+af85aa0f48ae99a39f4688c344e4419304f681f9af818a5c8d759286fc4418de android.hardware.gnss@1.0::IGnssNavigationMessage
+76b0874ea4c06b29f66418c59820f4286b3be9629cd872923d0dfbb602cd432d android.hardware.gnss@1.0::IGnssNavigationMessageCallback
+248bcf51da4273d64f367bf6877baef2feeaca365459842fd3c214a2dc6e0224 android.hardware.gnss@1.0::IGnssNi
+c781b7b125f68be5db8a8c3d412d526acdbdf77dcc592a4c0ed70b8ce4fe6c49 android.hardware.gnss@1.0::IGnssNiCallback
+c1142657de16fdb292a502372fe938614d65270ab8359217d6e13604fe4dbca4 android.hardware.gnss@1.0::IGnssXtra
+bd366b83d8d565d0e8bfabff3adfcab0259d75b4e2a9f8e1b91e11d1593a2ffb android.hardware.gnss@1.0::IGnssXtraCallback
+881bc2f94026784d194cffbff166c6e8bf911de4e02abe96fc7d89ec75b0574a android.hardware.gnss@1.0::types
+17971eb8a482893dadcfc16e0583f492d42a034ef95d9b0b709417af30838396 android.hardware.graphics.allocator@2.0::IAllocator
+60bf42a4898e4fb70dbd720b263aeafd7f35f5e1a5effeabb4d5d659878a5f18 android.hardware.graphics.bufferqueue@1.0::IGraphicBufferProducer
+b8a75617b9ec12bea641f3a73d4025a33e8b9a2f9169dd46094af56adf9249c5 android.hardware.graphics.bufferqueue@1.0::IProducerListener
+4f6dedbcdd21c309dfc650acea81a096d6b242493ffe49c8d61bd3c43aad354e android.hardware.graphics.common@1.0::types
+b3aac6c3817f039964fcd62268274b3039e17bd7d0d5b40b4d1d1c7b19a1f866 android.hardware.graphics.composer@2.1::IComposer
+b19d00eb8a8b3b0034a0321f22e8f32162bf4c2aebbce6da22c025f56e459ea2 android.hardware.graphics.composer@2.1::IComposerCallback
+61ee43ffe6fb6dbe8b22dc17c51ff3d5ba703fc6029cba211f901f3d79c8a72d android.hardware.graphics.composer@2.1::IComposerClient
+1c98c2f5154345312ec054871792a2982ec5f3e2bc2abfb61a10c0b517978e20 android.hardware.graphics.composer@2.1::types
+a695898589e1ef15b2b2510f11edd6aafac9918d9cf8d74b4b6143b309dee542 android.hardware.graphics.mapper@2.0::IMapper
+28507d385a3dd224bf3c32f1bfd9f96092c4701b9c1cc66caa578fc3efc97877 android.hardware.graphics.mapper@2.0::types
+91e2ba3805c923f01fc1231ec9ff838942aee3346f2d7614ecc0caeadbe57ed4 android.hardware.health@1.0::IHealth
+1275aa2e8732909101b26aec49ed2285489e89d97b8610a8908b7868e35a3cc5 android.hardware.health@1.0::types
+3a8d3922e06e6d4f8e0befc6be78d0e9e07aed1585b3da6521bed406d25a9483 android.hardware.ir@1.0::IConsumerIr
+7090bd37912fcf723a12f4bc17783e3527577c4944805a028c296fd7a95bd682 android.hardware.ir@1.0::types
+cc7925a78c0ab022515f48840d3dae76f384ed3a1287abadcb461a5cd5396163 android.hardware.keymaster@3.0::IKeymasterDevice
+822998d7bb76f0cd719a409291434fcb56e6d50bc4780788bb157a3374d63b8c android.hardware.keymaster@3.0::types
+d4ed2f0e14f9e914d0b1275d2e0363192fe30aca9059c84edb5fad15995f9ec4 android.hardware.light@2.0::ILight
+d9584bfcaedd6e62cf337881748246b23e36cbc2bc3aa84c01b6a1e622061400 android.hardware.light@2.0::types
+16c0cf0f73de1e5208a95020c6c6474903e7094f76b2d782651afaca0e5fd86f android.hardware.media@1.0::types
+8bc2f5fdcad68856eb61a62fe4cc043fa064bb7f1dab95a71d1918ec1eef7b55 android.hardware.media.omx@1.0::IGraphicBufferSource
+0d3de9cd89d4718ea3b772f2d8b93be004feb3abb7e7dc5402e37047cc730d05 android.hardware.media.omx@1.0::IOmx
+32002e1c358c64de106c977a6dc6af7da27be4803a5bb66fd6f891a5ba0a1617 android.hardware.media.omx@1.0::IOmxBufferSource
+81ad8d8bb1cf6f41923cf11dd39354a8fe433db284a234cc675de7e75a82224c android.hardware.media.omx@1.0::IOmxNode
+494c0c8bf6065edc82ec127228ed19dd2243dc1c2f7d601c7c6be7b7015c1713 android.hardware.media.omx@1.0::IOmxObserver
+252c2fc50c78fd6de8365e5b60e5115119ace107db0b94b0b26815cbf3d2b64a android.hardware.media.omx@1.0::IOmxStore
+148c1b50b0958988373145ffdf5fa0e1b6534e0a2034a570e74b15c127cf7c5e android.hardware.media.omx@1.0::types
+c66902fe48d687ac6740a3e32ae55fb75532c48c36c6386461c2b4416ad2e0f1 android.hardware.memtrack@1.0::IMemtrack
+860bacd8b11a269c40567542b613fe4ca448d5cb4326d0058899e608e89dfca1 android.hardware.memtrack@1.0::types
+07ac2dc95270321ec7d4c33cd25e5085a057f47fe350d645af6f7a7a11e3cf57 android.hardware.nfc@1.0::INfc
+f2fe54426c07d67388d4774a60641ad4c0538f22eb6e1111722f231772655de6 android.hardware.nfc@1.0::INfcClientCallback
+9626fd18db113d709faf593a70caf19bd0980294d23c468c80c30186f9d298a6 android.hardware.nfc@1.0::types
+deee1dc4948f33af207e1008aba0f6cc07afb7900eab53f33192c8cac137eefc android.hardware.power@1.0::IPower
+efc83df3f962b93c7c0290d691d7d300dabe12683e2cde3591fb3c0beedce20f android.hardware.power@1.0::types
+9b5aa499ec3b4226f15f48f5ed08896e2fc0676f978c9e199c1da21daaf002a6 android.hardware.radio@1.0::IRadio
+5c8efbb9c451a59737ed2c6c20230aae4745839ca01d8088d6dcc9020e52d2c5 android.hardware.radio@1.0::IRadioIndication
+69f6b4b8ec40ca02ccc7bb8227a097135c20c00bd94c822e421cd9af1267252c android.hardware.radio@1.0::IRadioResponse
+de3ab9f73b1073cd677b19d886fb927e9381b30161a704712d2b30f875873f5c android.hardware.radio@1.0::ISap
+d183e406ef0897df2117a9dde384e8e6ea4fa6ab1c7f6f28e65b87011218c9ea android.hardware.radio@1.0::ISapCallback
+96986fbd22f0e6ca752e1fcdc0a64bda213995a81f5f36bc4faf3532d9306b97 android.hardware.radio@1.0::types
+00f70085d6fae1d482fb700a3fd42ed475384c95b51c9269b9ae5037b74ad4dd android.hardware.radio.deprecated@1.0::IOemHook
+06837b6d7e843cfa9cd20fed4070feca7a9b5c81a9ed643bf7d06803455a9816 android.hardware.radio.deprecated@1.0::IOemHookIndication
+6fd4874f0eddd4626a27658fd94fad526c317f3563439e79718bdb1a3a2309d5 android.hardware.radio.deprecated@1.0::IOemHookResponse
+6983a2cafe39d5c57dfdc1743055fb0f757a0df8c78e00423d5e1810836927e1 android.hardware.renderscript@1.0::IContext
+7f9417a0ccf78ea042ec7a8ac8e3750346d4d9d7e5ae01b1b35fde303f47c24d android.hardware.renderscript@1.0::IDevice
+fc6f325b266b32353f7d1534fbe58e0d368265a12b77fa396fb556e8c443f739 android.hardware.renderscript@1.0::types
+89585ff541c319de4091a5a0b687dd526ac81c6382ffd7b979a4164b3d7419a6 android.hardware.sensors@1.0::ISensors
+e04ab978fc28f4c515f4a75617dfda8607733a64f13666beeb0e604a07a39333 android.hardware.sensors@1.0::types
+5befc019cbe94953661e2cdb95e3cf64f5e565c29403e1c2daecc2be44e0a55c android.hardware.soundtrigger@2.0::ISoundTriggerHw
+d7ec5f612a5e0a59ea4f2b61317e208ff56dd50920fd4eb441e0cbc8f97e4f49 android.hardware.soundtrigger@2.0::ISoundTriggerHwCallback
+5bee9e70f7e5ec7ee252883b28f98f12b59960f4c2a0b4cc9a4526e4669ebcd4 android.hardware.soundtrigger@2.0::types
+97f1ec446043bc5a6645b74529a6276496bdb35e0aee41eda55cb92d51eb7802 android.hardware.thermal@1.0::IThermal
+84965a6908bceb4ef51546bf8731f309f1ea9d09a0177dcc7974132e523dd6d2 android.hardware.thermal@1.0::types
+938850621c3c5ef426a4b88e752ba99b3559037e782a3d938604f3aef5cc0f1b android.hardware.tv.cec@1.0::IHdmiCec
+e75b6eea711d36fac678bce072b3cec6544b27fa9f4cd903999404e5c110ca10 android.hardware.tv.cec@1.0::IHdmiCecCallback
+6e25f8dbfadb668e1d4ec80eb9acd95d8bc9e0a240c36d27e662adb440314b95 android.hardware.tv.cec@1.0::types
+0cafa3c8388e9631916d2d800f78decbcec2904f11415b32c71a31d9a51ebf79 android.hardware.tv.input@1.0::ITvInput
+dee83e5c864fbbee8f02448d0800be32f06856386b9f907bc5d952208c9434f9 android.hardware.tv.input@1.0::ITvInputCallback
+07aab30410b612381234dca6d453d4ab96f2e536368715717c6e28101b9851b5 android.hardware.tv.input@1.0::types
+4ef57499273f38bdbdd0c15e56ee7a4bc5f18a5644092170a531df3541d9e015 android.hardware.usb@1.0::IUsb
+4be7881e411ba42784bf5b7354c14ae0cf161004d39433aaecaab0d19ea99354 android.hardware.usb@1.0::IUsbCallback
+f7e6e747910a3cd0a35846141e3b990a6a612a297b2b70ccd5740b646a450a8c android.hardware.usb@1.0::types
+06ea64cc3565777f3b259e400ffa7100d07f3827ad9357b0c5d3c651384e5553 android.hardware.vibrator@1.0::IVibrator
+0fecd34ae64f32eff6aa615fd662349242c0b8b6e303ef05a7cb5776c732f413 android.hardware.vibrator@1.0::types
+4b962968a7df4ab104d1315d66a0a7348a713fecbb5d2c1b23688494458f37ce android.hardware.vr@1.0::IVr
+b9be36719a8ad534000a51ea07be91be94c405bf1e038ae825acf65087ffd378 android.hardware.wifi@1.0::IWifi
+ee0224ee18813506d9d6f13d8c8e4679f053c290a443a52a7c52a5d3c852262b android.hardware.wifi@1.0::IWifiApIface
+f3eecc489deb4c74892f59eb7adb769063bd5c354ac132b626a5f42b363d36bc android.hardware.wifi@1.0::IWifiChip
+a1b988377645a58e5e2542ca2bad4e17c21a4a389213d05de2f0e32d57b7d339 android.hardware.wifi@1.0::IWifiChipEventCallback
+5ed6760ce77e84bc6c49d1acb3f7d8117c9176b3f06514bc44ad3af84c80dcfe android.hardware.wifi@1.0::IWifiEventCallback
+6b9ad43a5efbe6ca214f751e22ce43cf5cd4d5d5f2cba80f24ccd3755a72401c android.hardware.wifi@1.0::IWifiIface
+ba5aa74f1ba714f0093864227923492808795bda6199c4ea0891322d27f8c931 android.hardware.wifi@1.0::IWifiNanIface
+325c94f3e1a565b56bbc74faddbd0ba7cb824f263dccf9dfff2daf62b86ed774 android.hardware.wifi@1.0::IWifiNanIfaceEventCallback
+c2c3f0372b41780fb6dfe83c022296806c2024d7046682fd201de5aa9b791c7a android.hardware.wifi@1.0::IWifiP2pIface
+766e9765f5c9c759b2a763c2288353fb5deff3389c2cc28f81d79c939704ce8b android.hardware.wifi@1.0::IWifiRttController
+72ab6f3e120cbf07aa6f8e87ca89112bdeb36b7fbb96bce5af3712323ab8b8e6 android.hardware.wifi@1.0::IWifiRttControllerEventCallback
+3b8093d39ef1e10e43c5538afbf5ff6e39b8d8168ebbe1998d993e89e25f14a5 android.hardware.wifi@1.0::IWifiStaIface
+7fbfc551c3e23c8b4398c3e16e452b516457e6921424a53474cbf373ca306fa9 android.hardware.wifi@1.0::IWifiStaIfaceEventCallback
+e20d5132d6d23e072c15de065b5e2aa13ff965031246a2c82581732bae56bf6d android.hardware.wifi@1.0::types
+f7e55c08187d8c855068a1ee3d0c8daeee7570292d96509c21a8756d4f5cfb9b android.hardware.wifi.supplicant@1.0::ISupplicant
+56b5c7267cb3d3337f44eb8b0b38ff4c6260dcc70e07687fcab94b1ccea8d159 android.hardware.wifi.supplicant@1.0::ISupplicantCallback
+35ba7bcdf18f24a866a7e5429548f06768bb20a257f75b10a397c4d825ef8438 android.hardware.wifi.supplicant@1.0::ISupplicantIface
+cda01008c06922fa37c1213e9bb831a109b3174532805616fb7161edc403866f android.hardware.wifi.supplicant@1.0::ISupplicantNetwork
+4907410338c5e8dbeec4b5edc2608ea323f5561945f8810af81810c47b019184 android.hardware.wifi.supplicant@1.0::ISupplicantP2pIface
+8b63f5efa2e3be3a7cb8a428760d82285a4ab79bcbdea6ef90aa547555e582d4 android.hardware.wifi.supplicant@1.0::ISupplicantP2pIfaceCallback
+56128f74560571b6777d59453f35c6b35693ee377e2a23c807708906928f09de android.hardware.wifi.supplicant@1.0::ISupplicantP2pNetwork
+2067c22197bca9743dab66a6f561a8a8375c67b4f76aed05f776839499bd4c8f android.hardware.wifi.supplicant@1.0::ISupplicantP2pNetworkCallback
+7752e1de93aaf5fed37011c219ac247069f6af320b0810daa98510584a10e7b4 android.hardware.wifi.supplicant@1.0::ISupplicantStaIface
+d781c8d7e7b3fe5cca8cf6e1d8806e770982ae5358c7816ed51b0f0ec272e70d android.hardware.wifi.supplicant@1.0::ISupplicantStaIfaceCallback
+b12ef0bdd8a4d247a8a6e960b227ed32383f2b0241f55d67fcea6eff6a6737fa android.hardware.wifi.supplicant@1.0::ISupplicantStaNetwork
+d8f0877ae1d321c1d884c7631dfe36cab0ec8a4b2863d4b687f85d3549a63bcc android.hardware.wifi.supplicant@1.0::ISupplicantStaNetworkCallback
+fe3c3c2f572b72f15f8594c538b0577bd5c28722c31879cfe6231330cddb6747 android.hardware.wifi.supplicant@1.0::types
+
+# ABI preserving changes to HALs during Android O MR1 (Initial Set)
+
+# android.hardware.automotive.* are unfrozen
+150a338ce11fcec70757c9675d83cf6a5d7b40d0c812741b91671fecce59eac9 android.hardware.broadcastradio@1.0::types
+dc7e6d4f537b9943e27edc4f86c5a03bb643b18f18f866f8c3c71c0ac4ea8cbc android.hardware.broadcastradio@1.0::types
+760485232f6cce07f8bb05e3475509956996b702f77415ee5bff05e2ec5a5bcc android.hardware.dumpstate@1.0::IDumpstateDevice
+e822cb7f4a1bdd45689c5e92ccd19a2201c20b771bd4b2ec1ae627e324591f9d android.hardware.radio@1.0::IRadioResponse
+6e69adb24d7c0b0ca3a54a38c49a5625b161b3f5d5f7d6fda0befdbbfc8e9e06 android.hardware.radio@1.0::IRadioResponse
+28e929b453df3d9f5060af2764e6cdb123ddb893e3e86923c877f6ff7e5f02c9 android.hardware.wifi@1.0::types
+df1d7b27e644bfed0a4f606a8c44d35d45cafce82c7c648494c8a25c7cd4a949 android.hardware.wifi@1.0::types
+
+# HALs released in Android O MR1 (Initial Set)
+
+4b65763663a94a3920134011691f8fbb42ccb7b7795589efddc049a9106047d6 android.hardware.oemlock@1.0::IOemLock
+e02cd3722cb5e8fa51179f5defacb4f7866f903c9c7c51dc01a3148473a71525 android.hardware.oemlock@1.0::types
+224f9d22a367a0016f09b6dc676f53f1446697d9dc747163032329e5da552de5 android.hardware.power@1.1::IPower
+574fd9758b7cab4922c72cc5a9f36d1cd48ffd3425fdd776426653280d3d4138 android.hardware.power@1.1::types
+f79edf50a378a9c9bb737f93f205dab91b4c63ea49723afc6f856c138203ea81 android.hardware.radio@1.1::IRadio
+fcc5c8c88b85a9f63fba67d9e674da466c72a98ca287f343fb5721d098713f86 android.hardware.radio@1.1::IRadioIndication
+50f27e8c7ec009d5d4418b2ce8392b940bbf052ecc1d7251285f332485a5ba4e android.hardware.radio@1.1::IRadioResponse
+be981148c95c0089f3ae92854f0e7ae999d308e927db3e065f12a4fabe07852f android.hardware.radio@1.1::ISap
+d8d6bf7b4d36c04ce587df75953c3f723cfbe71c896c1aa8ab6478eae126723d android.hardware.radio@1.1::types
+d8aae01606bfd34bf2fb9a59cadc016f46f318e56cddb8f15a945c5b3c1222bc android.hardware.tetheroffload.config@1.0::IOffloadConfig
+447b00306bc95a7aafec1d660f6f3e9f76ac8bc0353193435e5579ab833da619 android.hardware.tetheroffload.control@1.0::IOffloadControl
+07658829339d75962016e00ed81b005ad29fca7ac12ad3bc3ccd86b08d94c2d3 android.hardware.tetheroffload.control@1.0::ITetheringOffloadCallback
+0df5b0178af15c53cdce8fcf8ca14035e8e08db4fa76fdc12009ddbe0b53626b android.hardware.tetheroffload.control@1.0::types
+b30ef02ef26ff804e2f6acf1201bc141b59e134e6a0338562284491102cb13e3 android.hardware.usb@1.1::IUsb
+13a580e35af01270a1e9774177c51db51d8672e6139ba00851e654e68a4d7dff android.hardware.usb@1.1::IUsbCallback
+f0ed667288908c08fced570bd1f3c4a0f236aa927938e805f0d9fece525da81e android.hardware.usb@1.1::types
+f95a1e85612f2d0d616eacd2eb63c52d10dfa889f165df57697c30e1f47b4785 android.hardware.vibrator@1.1::IVibrator
+246fb9d9e2b4800aeb0adc3cdbaa15d0321ebab54b7bd1ab87da5b67c7b0b064 android.hardware.vibrator@1.1::types
+9bc43413b80cd0c59a022e93da1448dcb82dd10c6dd31932df4659e4bdcb1368 android.hardware.weaver@1.0::IWeaver
+7728b0393a2ed9796537d4165c7d95407e9d8cb447a647b545fdfe06a28689e7 android.hardware.weaver@1.0::types
+bb7c96762d0aa3ddb874c8815bacdd3cbc8fb87ea2f82b928bc29e24a3593055 android.hardware.wifi.offload@1.0::IOffload
+c3354ab0d381a236c12dc486ad4b6bec28c979d26748b4661f12ede36f392808 android.hardware.wifi.offload@1.0::IOffloadCallback
+b18caefefcc765092412285d776234fcf213b73bdf07ae1b67a5f71b2d2464e3 android.hardware.wifi.offload@1.0::types
+c26473e2e4a00af43e28a0ddf9002e5062a7d0940429e5efb6e5513a8abcb75c android.hardware.wifi@1.1::IWifi
+b056e1defab4071584214584057d0bc73a613081bf1152590549649d4582c13c android.hardware.wifi@1.1::IWifiChip
+
+# ABI preserving changes to HALs during Android O MR1 (Final Set)
+2d833aeed0cd1d59437aca210be590a953cf32bcb6683cd63d089762a643fb49 android.hardware.radio@1.0::IRadioResponse
+05aa3de6130a9788fdb6f4d3cc57c3ea90f067e77a5e09d6a772ec7f6bca33d2 android.hardware.radio@1.1::IRadioResponse
+
+# HALs released in Android O MR1 (Final Set)
+044cb039378b8a0e36f40ff1e6ce04dc0d339da02095f968d5062a051e99d108 android.hardware.broadcastradio@1.1::types
+c9699483f8cefe4f9b39b4b9609b76cab2dd1659a06188056b45797d337d4256 android.hardware.broadcastradio@1.1::IBroadcastRadio
+b5d62dcd663fc4fcc977b252af59b333043bdfe73de2f11fe6d6a8bf438a0f92 android.hardware.broadcastradio@1.1::IBroadcastRadioFactory
+bc7e054a6e93adebedff345aeed44549be89e6b1b6ffe071ff47a61de764b232 android.hardware.broadcastradio@1.1::ITuner
+e9139fc755be578693f17c8cd1e27c75f412cfc722157bab5bf03ee68896e31d android.hardware.broadcastradio@1.1::ITunerCallback
+63929c99e5755d9e09d9e0fd2527391fbb1609dda0508f5933b7943b92ae0fbc android.hardware.camera.device@3.3::types
+bbcfc3f748b078f6a66c4e228084a679d30bd61bfde8bb7a91efd507b91c1bfd android.hardware.camera.device@3.3::ICameraDeviceSession
+4a6998cd6793a3f9f03989c29d662589b1bc9d38826c6698c6c17864f7a814f5 android.hardware.cas@1.0::types
+0e656ba1bac11461a17096ef752b69d24b000d820ef5652f0150a0f9731d54c2 android.hardware.cas@1.0::ICas
+b80e1456b81f80032d0de7cb45652ac15af11e7474d520d757481ecaad796dff android.hardware.cas@1.0::ICasListener
+a432d6d9200248dc2126827bcd6cdea31dd65eff39b939f64585d27d915a5857 android.hardware.cas@1.0::IDescramblerBase
+86ba9c03978b79a742e990420bc5ced0673d25a939f82572996bef92621e2014 android.hardware.cas@1.0::IMediaCasService
+503da837d1a67cbdb7c08a033e927e5430ae1b159d98bf72c6336b4dcc5e76f5 android.hardware.cas.native@1.0::types
+619600109232ed64b827c8a11beed8070b1827ae464547d7aa146cf0473b4bca android.hardware.cas.native@1.0::IDescrambler
+0a159f81359cd4f71bbe00972ee8403ea79351fb7c0cd48be72ebb3e424dbaef android.hardware.radio@1.0::types
+09342041e17c429fce0034b9096d17849122111436a5f0053e7e59500e1cb89c android.hardware.media.omx@1.0::IOmxStore
+246a56d37d57a47224562c9d077b4a2886ce6242b9311bd98a17325944c280d7 android.hardware.neuralnetworks@1.0::types
+93eb3757ceaf21590fa4cd1d4a7dfe3b3794af5396100a6d25630879352abce9 android.hardware.neuralnetworks@1.0::IDevice
+f66f9a38541bf92001d3adcce678cd7e3da2262124befb460b1c9aea9492813b android.hardware.neuralnetworks@1.0::IExecutionCallback
+953607822954435874f4b81686440a604e2a88cdd2d9164c6293f3d5772510d7 android.hardware.neuralnetworks@1.0::IPreparedModel
+73e03573494ba96f0e711ab7f1956c5b2d54c3da690cd7ecf4d6d0f287447730 android.hardware.neuralnetworks@1.0::IPreparedModelCallback
+f4945e397b5dea41bb64518dfde59be71245d8a125fd1e0acffeb57ac7b08fed android.hardware.thermal@1.1::IThermal
+c8bc853546dd55584611def2a9fa1d99f657e3366c976d2f60fe6b8aa6d2cb87 android.hardware.thermal@1.1::IThermalCallback
diff --git a/prebuilt_hashes/28.txt b/prebuilt_hashes/28.txt
new file mode 100644
index 0000000..cc15322
--- /dev/null
+++ b/prebuilt_hashes/28.txt
@@ -0,0 +1,382 @@
+# Do not change this file except to add new interfaces. Changing
+# pre-existing interfaces will fail VTS and break framework-only OTAs
+
+# HALs released in Android O
+
+f219c3b5b8c6cb1d659d4c7328f67246abfe1a8613f469826fd3b9ad090417a2 android.hardware.audio@2.0::IDevice
+4d579cae1cd87a783fd49233e10ce720ba183cfd1d5ccd80149e69de5c1c7362 android.hardware.audio@2.0::IDevicesFactory
+203e23f18011390b8cd10c303e0c16c4eebc8fa187e80e40d6be4624c2b0848a android.hardware.audio@2.0::IPrimaryDevice
+aaf93123deec336eb247ad8099849469a541ca0cf7c28c5f5336cebe1ee86748 android.hardware.audio@2.0::IStream
+0468c5723b0d44c5b451bdfa06153000c6f352fd3336e0ad2697127b04b766df android.hardware.audio@2.0::IStreamIn
+7296f7064fd3ab24082b43a1da34cc876268065310b785499fba5178d063680a android.hardware.audio@2.0::IStreamOut
+19d241d71c3e1140afba8140dcb57448446025a5fc03739788c4c25e9a98b6c2 android.hardware.audio@2.0::IStreamOutCallback
+c84da9f586087227daa3b96d42b4575326bccfd5bc8a2a5acf86d774f8ea2648 android.hardware.audio@2.0::types
+1305786c06e22b9b24ebde136054cc827b63c86d8bf4a136d6f7f54752b8566b android.hardware.audio.common@2.0::types
+fa8fbae3d1da3c264e4f3110728076abc09b4e65f12af6ae136367328de988ab android.hardware.audio.effect@2.0::IAcousticEchoCancelerEffect
+ca4752545d54547ff069eae161af7550cb5f5a7e8b60316ddd132a30906a68e7 android.hardware.audio.effect@2.0::IAutomaticGainControlEffect
+d2b8af988dc66f514d886bcee44b440d8034bc2a762f7161717ef3c956073067 android.hardware.audio.effect@2.0::IBassBoostEffect
+611bc09c75e796f3512b1ca6be508b0a9ba996759b8a2c60507784ff58076229 android.hardware.audio.effect@2.0::IDownmixEffect
+36a57369dfdc75180e8b64ae80b1970db8f6d9085dbff6ca931715038cc056e1 android.hardware.audio.effect@2.0::IEffect
+d2aa2df6d189c580f5be8460fa0ff4134d9c05a383f3204659baee426a6f0edf android.hardware.audio.effect@2.0::IEffectBufferProviderCallback
+217f9161983a48d3bf3faeb158f868aa8bf0ce25889e4ee3d2bab1a2e8d33e77 android.hardware.audio.effect@2.0::IEffectsFactory
+c2b38bc07991e880c83ca8cb88181411eeef708b8b936aedd2f2e0acade7df69 android.hardware.audio.effect@2.0::IEnvironmentalReverbEffect
+2ff9f9704be5f167745b4de790e9dafc3cc4719e2f6e2e5497085e679853cfe7 android.hardware.audio.effect@2.0::IEqualizerEffect
+c31447fb02dbc8b56c359941dad22f416511860173c5c5fd278d1bf2312b13de android.hardware.audio.effect@2.0::ILoudnessEnhancerEffect
+804831ca258802eb3eb65a0a7b5d5e3d37d4a15ba8c2836b4276eda98b47e1d0 android.hardware.audio.effect@2.0::INoiseSuppressionEffect
+778fd5b9837f481d8e47425b3e2a3bd0c6362a0b6870291518e2d863530fdb61 android.hardware.audio.effect@2.0::IPresetReverbEffect
+c93cb25a1a92d07aa80a617c01e8d22fc97bf8cefd3962b6a5be386ad4704d89 android.hardware.audio.effect@2.0::IVirtualizerEffect
+918f331780c9c7b04f2151a2e563aab088198ede8e6f865302ebaa13905bd9ce android.hardware.audio.effect@2.0::IVisualizerEffect
+4caad099f8fc00262b6c03ba41271808b37cea90ac98b534299bbf4ee823af02 android.hardware.audio.effect@2.0::types
+1fbdc1f852f8bd2e4a6c5cb30ac2b78668c98dce118a61762d4034ae859f43d8 android.hardware.biometrics.fingerprint@2.1::IBiometricsFingerprint
+aabb5c3c585592d71ee57b77298c14993d77914ddeaa64b2c5109a602b02ea47 android.hardware.biometrics.fingerprint@2.1::IBiometricsFingerprintClientCallback
+1ec60d4efddae9a7b2469278a576967b4751e88de5b8d7e9df6eff6bc0da7bc9 android.hardware.biometrics.fingerprint@2.1::types
+347ce746815607567f5f3b53e4800998ca5ab9355141f0880fc0cf0c1fc5c355 android.hardware.bluetooth@1.0::IBluetoothHci
+835f41be2281bfb22f3e33c6fa870bde7bc21e37e5cfbaf9a36fff170632f754 android.hardware.bluetooth@1.0::IBluetoothHciCallbacks
+a8dfd0dbe463a3cdbcf1d985b38a28b3d93ba2ae5a1d1db4aaef4c38a5781b91 android.hardware.bluetooth@1.0::types
+7192d756aeba00aba32f4504981df8172ffca83e210c4838dabf295e53e93590 android.hardware.boot@1.0::IBootControl
+cebaa803b8e33807a0d69f46652b650ccb549e8f9b19d6becbbf26690e828b49 android.hardware.boot@1.0::types
+a98d49f23712a7cc327d1e0602d05f6f3ad32cfb5c74711d009c726611ee1c93 android.hardware.broadcastradio@1.0::IBroadcastRadio
+ed82579c0c165feaa12d0e33c06b3342ab41ec0a439247f202775e8369e46ef6 android.hardware.broadcastradio@1.0::IBroadcastRadioFactory
+da6ab32ee2793d2c86d3b603075d5383852b89d7eaa201861aa0473d418f3c7f android.hardware.broadcastradio@1.0::ITuner
+04d3ca022e25c308d9efd2e7eb77b3a7a206907cdc1b9ea9326340b377868172 android.hardware.broadcastradio@1.0::ITunerCallback
+bd42c8d7838cfed1998b49c39745dec116d2d6edc2c11a4c0399b8f3a1d1655a android.hardware.broadcastradio@1.0::types
+81164323115d6588e259e8319fddf7487adfa1f49ce60f7e80ba74e0783392a4 android.hardware.camera.common@1.0::types
+c1705e9d62438a1d955269965af915ae28e692bd480a3b1ce67056fef992d62f android.hardware.camera.device@1.0::ICameraDevice
+78e9b44cf8660bdc1e98dca07451804153824efcd28db208a62f5ad728f44076 android.hardware.camera.device@1.0::ICameraDeviceCallback
+28f0386ba86ddf41e53a8117b48a0328d7a4d2574213e89f4a1062398a244566 android.hardware.camera.device@1.0::ICameraDevicePreviewCallback
+4db48439ce9dde97f1cfb3d7408f6c737f621ac0f7494aeea35ed599bc2352a3 android.hardware.camera.device@1.0::types
+b32f9aeaf1c442195eb06ffc7600968c919d005b2718874f09c57287fae55918 android.hardware.camera.device@3.2::ICameraDevice
+63bfc3da0f2d2301f7a0508c7c2b9ffc521d4d545ee03718da70e9d6273b3b21 android.hardware.camera.device@3.2::ICameraDeviceCallback
+0fa3e1e64819283b8737fc4e5ab759f0cb4ac1a996e8a51cc4aa8025a457208e android.hardware.camera.device@3.2::ICameraDeviceSession
+030be3d2b159cbde7920485807140f6b6064ef4a5de4a40a6c4bc8d2c72f7cd3 android.hardware.camera.device@3.2::types
+5ba7947cee515d7a2359bfcbfb9678c1c3a768c288471919ac095b96ae6f3d40 android.hardware.camera.metadata@3.2::types
+f7e299d85033ac52d1095a35784fcfeaff43603f58c751e4153c85bbade3b330 android.hardware.camera.provider@2.4::ICameraProvider
+a501ca1aecd09f1b9fd70a9af84205430dbd49a808e8fa395d363b9902e6f58c android.hardware.camera.provider@2.4::ICameraProviderCallback
+7f5fe8f4f8a24037153c504d8b4d3313c2ce33d81c8c69fe5194ddd2d4080e72 android.hardware.configstore@1.0::ISurfaceFlingerConfigs
+87beacc481897cf02fb1628d75e68133de6d74d4cffe582cda2f5e16bdd74516 android.hardware.configstore@1.0::types
+a5ae0fe8667f0b1af09b13e72d29600f4eb3853b257079c45a99b6f4a3360649 android.hardware.contexthub@1.0::IContexthub
+2ab3054c2d9302d8417ee7495353a2887fe338f913276f2eb41e80f11395ec2e android.hardware.contexthub@1.0::IContexthubCallback
+c3b2b37d561d31ea094411f251bf73bea334f4fe849a4390aef5e20bca6cadba android.hardware.contexthub@1.0::types
+df174c1871c864b4c79ca9f64aae7936d24a272eca3191a30458ca2b706dec79 android.hardware.drm@1.0::ICryptoFactory
+83639e90caeb996b0274e420de3cd556779de1ca48464b68eee799bef32b34cd android.hardware.drm@1.0::ICryptoPlugin
+1440cffdfaeb12830ac10ee6ffdb0f1083e701057b806df11fb4787b4c91e718 android.hardware.drm@1.0::IDrmFactory
+78ba33b108f620e6a0eec01ef654547e69a85754578ea4c9ef03ec205f16121c android.hardware.drm@1.0::IDrmPlugin
+701d9e51952172364e4ea70db9c397f08c3b4577ba33051f050a6cdd532de1b4 android.hardware.drm@1.0::IDrmPluginListener
+4238d62ad90df63aa338c6f1b6264c09c5a3706945d5c49d1189c0be1dc9e942 android.hardware.drm@1.0::types
+f07b1ee3ba11a2fc9f200421b2e1afb7c1854ee987000e45c987fb9507795055 android.hardware.dumpstate@1.0::IDumpstateDevice
+c9d318df7922bde3b265927b521ff5a965002826fc0cabfcaef52a56760f2d34 android.hardware.gatekeeper@1.0::IGatekeeper
+da13bd69282fb275767abb18704c57ff8038e6c139ad17157dc702810f70d06a android.hardware.gatekeeper@1.0::types
+37c7da4f823ec958dfa9c960e2d341c48f877e0bfa758f3fa9e2d9c1e1bd66d9 android.hardware.gnss@1.0::IAGnss
+7ec9afdb964bfb8369866913caf018f2636592885bcb558a65de2c5436ab4f60 android.hardware.gnss@1.0::IAGnssCallback
+d16e6a359be6963ea753d7138e84ecf2b93052097938938c4d36d7a47ea2e2ae android.hardware.gnss@1.0::IAGnssRil
+2f907708d74d94b1e121ed27651c9c72af65952d347b58ff07dac5d5d7a7f678 android.hardware.gnss@1.0::IAGnssRilCallback
+5ac7edad06d76064b882be161f3f9d9692a997ec72e9f36addb7fe8918f49992 android.hardware.gnss@1.0::IGnss
+b05c983c87c3376e145223688c3b541b5e11b827f211e38d5a31af1ca3a2e222 android.hardware.gnss@1.0::IGnssBatching
+4981d2d2c4e725c7544be0956099a91fc7bbc8048c563394158083fe924e651e android.hardware.gnss@1.0::IGnssBatchingCallback
+3cd22d92cc1f935150c5048310e84886f14eed2556e8f00636733d204045cc4f android.hardware.gnss@1.0::IGnssCallback
+175185a5eda87476193ca5461df75dd16d36664591e8130530dd8ef0eb2ddf6a android.hardware.gnss@1.0::IGnssConfiguration
+4542122b96fbf27101cb8222bafb76e7c8d032d977dd1058edd8e5881ca5752f android.hardware.gnss@1.0::IGnssDebug
+e6dd0c8416e523ab9cbd14d56ab6f016481a8aef3bc8a750051122d31075f6c7 android.hardware.gnss@1.0::IGnssGeofenceCallback
+f90e4ddc652706299d8e3d8ba18e0745c3bae9bf4d1be6bd06d9c1f50ec8d28a android.hardware.gnss@1.0::IGnssGeofencing
+9ea8987bb1089c8c5d7b67866575b866ef516045021d9efcc37c6352bce072a3 android.hardware.gnss@1.0::IGnssMeasurement
+cf20492673d6a423e4c2e87fdfb5a4c4a602431721978db852e246f258e25edb android.hardware.gnss@1.0::IGnssMeasurementCallback
+af85aa0f48ae99a39f4688c344e4419304f681f9af818a5c8d759286fc4418de android.hardware.gnss@1.0::IGnssNavigationMessage
+76b0874ea4c06b29f66418c59820f4286b3be9629cd872923d0dfbb602cd432d android.hardware.gnss@1.0::IGnssNavigationMessageCallback
+248bcf51da4273d64f367bf6877baef2feeaca365459842fd3c214a2dc6e0224 android.hardware.gnss@1.0::IGnssNi
+c781b7b125f68be5db8a8c3d412d526acdbdf77dcc592a4c0ed70b8ce4fe6c49 android.hardware.gnss@1.0::IGnssNiCallback
+c1142657de16fdb292a502372fe938614d65270ab8359217d6e13604fe4dbca4 android.hardware.gnss@1.0::IGnssXtra
+bd366b83d8d565d0e8bfabff3adfcab0259d75b4e2a9f8e1b91e11d1593a2ffb android.hardware.gnss@1.0::IGnssXtraCallback
+881bc2f94026784d194cffbff166c6e8bf911de4e02abe96fc7d89ec75b0574a android.hardware.gnss@1.0::types
+17971eb8a482893dadcfc16e0583f492d42a034ef95d9b0b709417af30838396 android.hardware.graphics.allocator@2.0::IAllocator
+60bf42a4898e4fb70dbd720b263aeafd7f35f5e1a5effeabb4d5d659878a5f18 android.hardware.graphics.bufferqueue@1.0::IGraphicBufferProducer
+b8a75617b9ec12bea641f3a73d4025a33e8b9a2f9169dd46094af56adf9249c5 android.hardware.graphics.bufferqueue@1.0::IProducerListener
+4f6dedbcdd21c309dfc650acea81a096d6b242493ffe49c8d61bd3c43aad354e android.hardware.graphics.common@1.0::types
+b3aac6c3817f039964fcd62268274b3039e17bd7d0d5b40b4d1d1c7b19a1f866 android.hardware.graphics.composer@2.1::IComposer
+b19d00eb8a8b3b0034a0321f22e8f32162bf4c2aebbce6da22c025f56e459ea2 android.hardware.graphics.composer@2.1::IComposerCallback
+61ee43ffe6fb6dbe8b22dc17c51ff3d5ba703fc6029cba211f901f3d79c8a72d android.hardware.graphics.composer@2.1::IComposerClient
+1c98c2f5154345312ec054871792a2982ec5f3e2bc2abfb61a10c0b517978e20 android.hardware.graphics.composer@2.1::types
+a695898589e1ef15b2b2510f11edd6aafac9918d9cf8d74b4b6143b309dee542 android.hardware.graphics.mapper@2.0::IMapper
+28507d385a3dd224bf3c32f1bfd9f96092c4701b9c1cc66caa578fc3efc97877 android.hardware.graphics.mapper@2.0::types
+91e2ba3805c923f01fc1231ec9ff838942aee3346f2d7614ecc0caeadbe57ed4 android.hardware.health@1.0::IHealth
+1275aa2e8732909101b26aec49ed2285489e89d97b8610a8908b7868e35a3cc5 android.hardware.health@1.0::types
+3a8d3922e06e6d4f8e0befc6be78d0e9e07aed1585b3da6521bed406d25a9483 android.hardware.ir@1.0::IConsumerIr
+7090bd37912fcf723a12f4bc17783e3527577c4944805a028c296fd7a95bd682 android.hardware.ir@1.0::types
+cc7925a78c0ab022515f48840d3dae76f384ed3a1287abadcb461a5cd5396163 android.hardware.keymaster@3.0::IKeymasterDevice
+822998d7bb76f0cd719a409291434fcb56e6d50bc4780788bb157a3374d63b8c android.hardware.keymaster@3.0::types
+d4ed2f0e14f9e914d0b1275d2e0363192fe30aca9059c84edb5fad15995f9ec4 android.hardware.light@2.0::ILight
+d9584bfcaedd6e62cf337881748246b23e36cbc2bc3aa84c01b6a1e622061400 android.hardware.light@2.0::types
+16c0cf0f73de1e5208a95020c6c6474903e7094f76b2d782651afaca0e5fd86f android.hardware.media@1.0::types
+8bc2f5fdcad68856eb61a62fe4cc043fa064bb7f1dab95a71d1918ec1eef7b55 android.hardware.media.omx@1.0::IGraphicBufferSource
+0d3de9cd89d4718ea3b772f2d8b93be004feb3abb7e7dc5402e37047cc730d05 android.hardware.media.omx@1.0::IOmx
+32002e1c358c64de106c977a6dc6af7da27be4803a5bb66fd6f891a5ba0a1617 android.hardware.media.omx@1.0::IOmxBufferSource
+81ad8d8bb1cf6f41923cf11dd39354a8fe433db284a234cc675de7e75a82224c android.hardware.media.omx@1.0::IOmxNode
+494c0c8bf6065edc82ec127228ed19dd2243dc1c2f7d601c7c6be7b7015c1713 android.hardware.media.omx@1.0::IOmxObserver
+252c2fc50c78fd6de8365e5b60e5115119ace107db0b94b0b26815cbf3d2b64a android.hardware.media.omx@1.0::IOmxStore
+148c1b50b0958988373145ffdf5fa0e1b6534e0a2034a570e74b15c127cf7c5e android.hardware.media.omx@1.0::types
+c66902fe48d687ac6740a3e32ae55fb75532c48c36c6386461c2b4416ad2e0f1 android.hardware.memtrack@1.0::IMemtrack
+860bacd8b11a269c40567542b613fe4ca448d5cb4326d0058899e608e89dfca1 android.hardware.memtrack@1.0::types
+07ac2dc95270321ec7d4c33cd25e5085a057f47fe350d645af6f7a7a11e3cf57 android.hardware.nfc@1.0::INfc
+f2fe54426c07d67388d4774a60641ad4c0538f22eb6e1111722f231772655de6 android.hardware.nfc@1.0::INfcClientCallback
+9626fd18db113d709faf593a70caf19bd0980294d23c468c80c30186f9d298a6 android.hardware.nfc@1.0::types
+deee1dc4948f33af207e1008aba0f6cc07afb7900eab53f33192c8cac137eefc android.hardware.power@1.0::IPower
+efc83df3f962b93c7c0290d691d7d300dabe12683e2cde3591fb3c0beedce20f android.hardware.power@1.0::types
+9b5aa499ec3b4226f15f48f5ed08896e2fc0676f978c9e199c1da21daaf002a6 android.hardware.radio@1.0::IRadio
+5c8efbb9c451a59737ed2c6c20230aae4745839ca01d8088d6dcc9020e52d2c5 android.hardware.radio@1.0::IRadioIndication
+69f6b4b8ec40ca02ccc7bb8227a097135c20c00bd94c822e421cd9af1267252c android.hardware.radio@1.0::IRadioResponse
+de3ab9f73b1073cd677b19d886fb927e9381b30161a704712d2b30f875873f5c android.hardware.radio@1.0::ISap
+d183e406ef0897df2117a9dde384e8e6ea4fa6ab1c7f6f28e65b87011218c9ea android.hardware.radio@1.0::ISapCallback
+96986fbd22f0e6ca752e1fcdc0a64bda213995a81f5f36bc4faf3532d9306b97 android.hardware.radio@1.0::types
+00f70085d6fae1d482fb700a3fd42ed475384c95b51c9269b9ae5037b74ad4dd android.hardware.radio.deprecated@1.0::IOemHook
+06837b6d7e843cfa9cd20fed4070feca7a9b5c81a9ed643bf7d06803455a9816 android.hardware.radio.deprecated@1.0::IOemHookIndication
+6fd4874f0eddd4626a27658fd94fad526c317f3563439e79718bdb1a3a2309d5 android.hardware.radio.deprecated@1.0::IOemHookResponse
+6983a2cafe39d5c57dfdc1743055fb0f757a0df8c78e00423d5e1810836927e1 android.hardware.renderscript@1.0::IContext
+7f9417a0ccf78ea042ec7a8ac8e3750346d4d9d7e5ae01b1b35fde303f47c24d android.hardware.renderscript@1.0::IDevice
+fc6f325b266b32353f7d1534fbe58e0d368265a12b77fa396fb556e8c443f739 android.hardware.renderscript@1.0::types
+89585ff541c319de4091a5a0b687dd526ac81c6382ffd7b979a4164b3d7419a6 android.hardware.sensors@1.0::ISensors
+e04ab978fc28f4c515f4a75617dfda8607733a64f13666beeb0e604a07a39333 android.hardware.sensors@1.0::types
+5befc019cbe94953661e2cdb95e3cf64f5e565c29403e1c2daecc2be44e0a55c android.hardware.soundtrigger@2.0::ISoundTriggerHw
+d7ec5f612a5e0a59ea4f2b61317e208ff56dd50920fd4eb441e0cbc8f97e4f49 android.hardware.soundtrigger@2.0::ISoundTriggerHwCallback
+5bee9e70f7e5ec7ee252883b28f98f12b59960f4c2a0b4cc9a4526e4669ebcd4 android.hardware.soundtrigger@2.0::types
+97f1ec446043bc5a6645b74529a6276496bdb35e0aee41eda55cb92d51eb7802 android.hardware.thermal@1.0::IThermal
+84965a6908bceb4ef51546bf8731f309f1ea9d09a0177dcc7974132e523dd6d2 android.hardware.thermal@1.0::types
+938850621c3c5ef426a4b88e752ba99b3559037e782a3d938604f3aef5cc0f1b android.hardware.tv.cec@1.0::IHdmiCec
+e75b6eea711d36fac678bce072b3cec6544b27fa9f4cd903999404e5c110ca10 android.hardware.tv.cec@1.0::IHdmiCecCallback
+6e25f8dbfadb668e1d4ec80eb9acd95d8bc9e0a240c36d27e662adb440314b95 android.hardware.tv.cec@1.0::types
+0cafa3c8388e9631916d2d800f78decbcec2904f11415b32c71a31d9a51ebf79 android.hardware.tv.input@1.0::ITvInput
+dee83e5c864fbbee8f02448d0800be32f06856386b9f907bc5d952208c9434f9 android.hardware.tv.input@1.0::ITvInputCallback
+07aab30410b612381234dca6d453d4ab96f2e536368715717c6e28101b9851b5 android.hardware.tv.input@1.0::types
+4ef57499273f38bdbdd0c15e56ee7a4bc5f18a5644092170a531df3541d9e015 android.hardware.usb@1.0::IUsb
+4be7881e411ba42784bf5b7354c14ae0cf161004d39433aaecaab0d19ea99354 android.hardware.usb@1.0::IUsbCallback
+f7e6e747910a3cd0a35846141e3b990a6a612a297b2b70ccd5740b646a450a8c android.hardware.usb@1.0::types
+06ea64cc3565777f3b259e400ffa7100d07f3827ad9357b0c5d3c651384e5553 android.hardware.vibrator@1.0::IVibrator
+0fecd34ae64f32eff6aa615fd662349242c0b8b6e303ef05a7cb5776c732f413 android.hardware.vibrator@1.0::types
+4b962968a7df4ab104d1315d66a0a7348a713fecbb5d2c1b23688494458f37ce android.hardware.vr@1.0::IVr
+b9be36719a8ad534000a51ea07be91be94c405bf1e038ae825acf65087ffd378 android.hardware.wifi@1.0::IWifi
+ee0224ee18813506d9d6f13d8c8e4679f053c290a443a52a7c52a5d3c852262b android.hardware.wifi@1.0::IWifiApIface
+f3eecc489deb4c74892f59eb7adb769063bd5c354ac132b626a5f42b363d36bc android.hardware.wifi@1.0::IWifiChip
+a1b988377645a58e5e2542ca2bad4e17c21a4a389213d05de2f0e32d57b7d339 android.hardware.wifi@1.0::IWifiChipEventCallback
+5ed6760ce77e84bc6c49d1acb3f7d8117c9176b3f06514bc44ad3af84c80dcfe android.hardware.wifi@1.0::IWifiEventCallback
+6b9ad43a5efbe6ca214f751e22ce43cf5cd4d5d5f2cba80f24ccd3755a72401c android.hardware.wifi@1.0::IWifiIface
+ba5aa74f1ba714f0093864227923492808795bda6199c4ea0891322d27f8c931 android.hardware.wifi@1.0::IWifiNanIface
+325c94f3e1a565b56bbc74faddbd0ba7cb824f263dccf9dfff2daf62b86ed774 android.hardware.wifi@1.0::IWifiNanIfaceEventCallback
+c2c3f0372b41780fb6dfe83c022296806c2024d7046682fd201de5aa9b791c7a android.hardware.wifi@1.0::IWifiP2pIface
+766e9765f5c9c759b2a763c2288353fb5deff3389c2cc28f81d79c939704ce8b android.hardware.wifi@1.0::IWifiRttController
+72ab6f3e120cbf07aa6f8e87ca89112bdeb36b7fbb96bce5af3712323ab8b8e6 android.hardware.wifi@1.0::IWifiRttControllerEventCallback
+3b8093d39ef1e10e43c5538afbf5ff6e39b8d8168ebbe1998d993e89e25f14a5 android.hardware.wifi@1.0::IWifiStaIface
+7fbfc551c3e23c8b4398c3e16e452b516457e6921424a53474cbf373ca306fa9 android.hardware.wifi@1.0::IWifiStaIfaceEventCallback
+e20d5132d6d23e072c15de065b5e2aa13ff965031246a2c82581732bae56bf6d android.hardware.wifi@1.0::types
+f7e55c08187d8c855068a1ee3d0c8daeee7570292d96509c21a8756d4f5cfb9b android.hardware.wifi.supplicant@1.0::ISupplicant
+56b5c7267cb3d3337f44eb8b0b38ff4c6260dcc70e07687fcab94b1ccea8d159 android.hardware.wifi.supplicant@1.0::ISupplicantCallback
+35ba7bcdf18f24a866a7e5429548f06768bb20a257f75b10a397c4d825ef8438 android.hardware.wifi.supplicant@1.0::ISupplicantIface
+cda01008c06922fa37c1213e9bb831a109b3174532805616fb7161edc403866f android.hardware.wifi.supplicant@1.0::ISupplicantNetwork
+4907410338c5e8dbeec4b5edc2608ea323f5561945f8810af81810c47b019184 android.hardware.wifi.supplicant@1.0::ISupplicantP2pIface
+8b63f5efa2e3be3a7cb8a428760d82285a4ab79bcbdea6ef90aa547555e582d4 android.hardware.wifi.supplicant@1.0::ISupplicantP2pIfaceCallback
+56128f74560571b6777d59453f35c6b35693ee377e2a23c807708906928f09de android.hardware.wifi.supplicant@1.0::ISupplicantP2pNetwork
+2067c22197bca9743dab66a6f561a8a8375c67b4f76aed05f776839499bd4c8f android.hardware.wifi.supplicant@1.0::ISupplicantP2pNetworkCallback
+7752e1de93aaf5fed37011c219ac247069f6af320b0810daa98510584a10e7b4 android.hardware.wifi.supplicant@1.0::ISupplicantStaIface
+d781c8d7e7b3fe5cca8cf6e1d8806e770982ae5358c7816ed51b0f0ec272e70d android.hardware.wifi.supplicant@1.0::ISupplicantStaIfaceCallback
+b12ef0bdd8a4d247a8a6e960b227ed32383f2b0241f55d67fcea6eff6a6737fa android.hardware.wifi.supplicant@1.0::ISupplicantStaNetwork
+d8f0877ae1d321c1d884c7631dfe36cab0ec8a4b2863d4b687f85d3549a63bcc android.hardware.wifi.supplicant@1.0::ISupplicantStaNetworkCallback
+fe3c3c2f572b72f15f8594c538b0577bd5c28722c31879cfe6231330cddb6747 android.hardware.wifi.supplicant@1.0::types
+
+# ABI preserving changes to HALs during Android O MR1 (Initial Set)
+
+150a338ce11fcec70757c9675d83cf6a5d7b40d0c812741b91671fecce59eac9 android.hardware.broadcastradio@1.0::types
+dc7e6d4f537b9943e27edc4f86c5a03bb643b18f18f866f8c3c71c0ac4ea8cbc android.hardware.broadcastradio@1.0::types
+760485232f6cce07f8bb05e3475509956996b702f77415ee5bff05e2ec5a5bcc android.hardware.dumpstate@1.0::IDumpstateDevice
+78589343d8ee2e1b155acad3fbdc7fcbb6af94491aee968b2383c21627264f8b android.hardware.radio@1.0::IRadioResponse # Available in Android O, b/68061860
+e822cb7f4a1bdd45689c5e92ccd19a2201c20b771bd4b2ec1ae627e324591f9d android.hardware.radio@1.0::IRadioResponse
+6e69adb24d7c0b0ca3a54a38c49a5625b161b3f5d5f7d6fda0befdbbfc8e9e06 android.hardware.radio@1.0::IRadioResponse
+c2c50ec74c87a583c683b4493f8f9f2e454a8d41c57af5b3eb88823a999f0ea4 android.hardware.radio@1.0::IRadioResponse # Added for b/65230472 for Android O
+4922dd58e89a03181ed1c48a6e118e47633b73b11090bdfed5aa920d25a7592b android.hardware.radio@1.0::IRadioResponse # Added for b/65230472 for Android O DR
+28e929b453df3d9f5060af2764e6cdb123ddb893e3e86923c877f6ff7e5f02c9 android.hardware.wifi@1.0::types
+df1d7b27e644bfed0a4f606a8c44d35d45cafce82c7c648494c8a25c7cd4a949 android.hardware.wifi@1.0::types
+
+# HALs released in Android O MR1 (Initial Set)
+
+4b65763663a94a3920134011691f8fbb42ccb7b7795589efddc049a9106047d6 android.hardware.oemlock@1.0::IOemLock
+e02cd3722cb5e8fa51179f5defacb4f7866f903c9c7c51dc01a3148473a71525 android.hardware.oemlock@1.0::types
+224f9d22a367a0016f09b6dc676f53f1446697d9dc747163032329e5da552de5 android.hardware.power@1.1::IPower
+574fd9758b7cab4922c72cc5a9f36d1cd48ffd3425fdd776426653280d3d4138 android.hardware.power@1.1::types
+f79edf50a378a9c9bb737f93f205dab91b4c63ea49723afc6f856c138203ea81 android.hardware.radio@1.1::IRadio
+fcc5c8c88b85a9f63fba67d9e674da466c72a98ca287f343fb5721d098713f86 android.hardware.radio@1.1::IRadioIndication
+50f27e8c7ec009d5d4418b2ce8392b940bbf052ecc1d7251285f332485a5ba4e android.hardware.radio@1.1::IRadioResponse
+be981148c95c0089f3ae92854f0e7ae999d308e927db3e065f12a4fabe07852f android.hardware.radio@1.1::ISap
+d8d6bf7b4d36c04ce587df75953c3f723cfbe71c896c1aa8ab6478eae126723d android.hardware.radio@1.1::types
+d8aae01606bfd34bf2fb9a59cadc016f46f318e56cddb8f15a945c5b3c1222bc android.hardware.tetheroffload.config@1.0::IOffloadConfig
+447b00306bc95a7aafec1d660f6f3e9f76ac8bc0353193435e5579ab833da619 android.hardware.tetheroffload.control@1.0::IOffloadControl
+07658829339d75962016e00ed81b005ad29fca7ac12ad3bc3ccd86b08d94c2d3 android.hardware.tetheroffload.control@1.0::ITetheringOffloadCallback
+0df5b0178af15c53cdce8fcf8ca14035e8e08db4fa76fdc12009ddbe0b53626b android.hardware.tetheroffload.control@1.0::types
+b30ef02ef26ff804e2f6acf1201bc141b59e134e6a0338562284491102cb13e3 android.hardware.usb@1.1::IUsb
+13a580e35af01270a1e9774177c51db51d8672e6139ba00851e654e68a4d7dff android.hardware.usb@1.1::IUsbCallback
+f0ed667288908c08fced570bd1f3c4a0f236aa927938e805f0d9fece525da81e android.hardware.usb@1.1::types
+f95a1e85612f2d0d616eacd2eb63c52d10dfa889f165df57697c30e1f47b4785 android.hardware.vibrator@1.1::IVibrator
+246fb9d9e2b4800aeb0adc3cdbaa15d0321ebab54b7bd1ab87da5b67c7b0b064 android.hardware.vibrator@1.1::types
+9bc43413b80cd0c59a022e93da1448dcb82dd10c6dd31932df4659e4bdcb1368 android.hardware.weaver@1.0::IWeaver
+7728b0393a2ed9796537d4165c7d95407e9d8cb447a647b545fdfe06a28689e7 android.hardware.weaver@1.0::types
+bb7c96762d0aa3ddb874c8815bacdd3cbc8fb87ea2f82b928bc29e24a3593055 android.hardware.wifi.offload@1.0::IOffload
+c3354ab0d381a236c12dc486ad4b6bec28c979d26748b4661f12ede36f392808 android.hardware.wifi.offload@1.0::IOffloadCallback
+b18caefefcc765092412285d776234fcf213b73bdf07ae1b67a5f71b2d2464e3 android.hardware.wifi.offload@1.0::types
+c26473e2e4a00af43e28a0ddf9002e5062a7d0940429e5efb6e5513a8abcb75c android.hardware.wifi@1.1::IWifi
+b056e1defab4071584214584057d0bc73a613081bf1152590549649d4582c13c android.hardware.wifi@1.1::IWifiChip
+
+# ABI preserving changes to HALs during Android O MR1 (Final Set)
+09342041e17c429fce0034b9096d17849122111436a5f0053e7e59500e1cb89c android.hardware.media.omx@1.0::IOmxStore
+2d833aeed0cd1d59437aca210be590a953cf32bcb6683cd63d089762a643fb49 android.hardware.radio@1.0::IRadioResponse
+0a159f81359cd4f71bbe00972ee8403ea79351fb7c0cd48be72ebb3e424dbaef android.hardware.radio@1.0::types
+05aa3de6130a9788fdb6f4d3cc57c3ea90f067e77a5e09d6a772ec7f6bca33d2 android.hardware.radio@1.1::IRadioResponse
+
+# HALs released in Android O MR1 (Final Set)
+044cb039378b8a0e36f40ff1e6ce04dc0d339da02095f968d5062a051e99d108 android.hardware.broadcastradio@1.1::types
+c9699483f8cefe4f9b39b4b9609b76cab2dd1659a06188056b45797d337d4256 android.hardware.broadcastradio@1.1::IBroadcastRadio
+b5d62dcd663fc4fcc977b252af59b333043bdfe73de2f11fe6d6a8bf438a0f92 android.hardware.broadcastradio@1.1::IBroadcastRadioFactory
+bc7e054a6e93adebedff345aeed44549be89e6b1b6ffe071ff47a61de764b232 android.hardware.broadcastradio@1.1::ITuner
+e9139fc755be578693f17c8cd1e27c75f412cfc722157bab5bf03ee68896e31d android.hardware.broadcastradio@1.1::ITunerCallback
+63929c99e5755d9e09d9e0fd2527391fbb1609dda0508f5933b7943b92ae0fbc android.hardware.camera.device@3.3::types
+bbcfc3f748b078f6a66c4e228084a679d30bd61bfde8bb7a91efd507b91c1bfd android.hardware.camera.device@3.3::ICameraDeviceSession
+4a6998cd6793a3f9f03989c29d662589b1bc9d38826c6698c6c17864f7a814f5 android.hardware.cas@1.0::types
+0e656ba1bac11461a17096ef752b69d24b000d820ef5652f0150a0f9731d54c2 android.hardware.cas@1.0::ICas
+b80e1456b81f80032d0de7cb45652ac15af11e7474d520d757481ecaad796dff android.hardware.cas@1.0::ICasListener
+a432d6d9200248dc2126827bcd6cdea31dd65eff39b939f64585d27d915a5857 android.hardware.cas@1.0::IDescramblerBase
+86ba9c03978b79a742e990420bc5ced0673d25a939f82572996bef92621e2014 android.hardware.cas@1.0::IMediaCasService
+503da837d1a67cbdb7c08a033e927e5430ae1b159d98bf72c6336b4dcc5e76f5 android.hardware.cas.native@1.0::types
+619600109232ed64b827c8a11beed8070b1827ae464547d7aa146cf0473b4bca android.hardware.cas.native@1.0::IDescrambler
+93eb3757ceaf21590fa4cd1d4a7dfe3b3794af5396100a6d25630879352abce9 android.hardware.neuralnetworks@1.0::IDevice
+f66f9a38541bf92001d3adcce678cd7e3da2262124befb460b1c9aea9492813b android.hardware.neuralnetworks@1.0::IExecutionCallback
+953607822954435874f4b81686440a604e2a88cdd2d9164c6293f3d5772510d7 android.hardware.neuralnetworks@1.0::IPreparedModel
+73e03573494ba96f0e711ab7f1956c5b2d54c3da690cd7ecf4d6d0f287447730 android.hardware.neuralnetworks@1.0::IPreparedModelCallback
+246a56d37d57a47224562c9d077b4a2886ce6242b9311bd98a17325944c280d7 android.hardware.neuralnetworks@1.0::types
+f4945e397b5dea41bb64518dfde59be71245d8a125fd1e0acffeb57ac7b08fed android.hardware.thermal@1.1::IThermal
+c8bc853546dd55584611def2a9fa1d99f657e3366c976d2f60fe6b8aa6d2cb87 android.hardware.thermal@1.1::IThermalCallback
+
+# ABI preserving changes to HALs during Android P
+9e7a0b650d0e461ece2cfec0e1072abf8676f592b41a7fb48f01e88fc3c8f780 android.hardware.broadcastradio@1.0::types
+cf72ff5a52bfa4d08e9e1000cf3ab5952a2d280c7f13cdad5ab7905c08050766 android.hardware.camera.metadata@3.2::types
+3902efc42097cba55f0655aa389e052ea70164e99ced1a6d1ef53dafc13f7650 android.hardware.camera.provider@2.4::ICameraProvider
+6fa9804a17a8bb7923a56bd10493a5483c20007e4c9026fd04287bee7c945a8c android.hardware.gnss@1.0::IGnssCallback
+fb92e2b40f8e9d494e8fd3b4ac18499a3216342e7cff160714c3bbf3660b6e79 android.hardware.gnss@1.0::IGnssConfiguration
+251594ea9b27447bfa005ebd806e58fb0ae4aad84a69938129c9800ec0c64eda android.hardware.gnss@1.0::IGnssMeasurementCallback
+4e7169919d24fbe5573e5bcd683d0bd7abf553a4e6c34c41f9dfc1e12050db07 android.hardware.gnss@1.0::IGnssNavigationMessageCallback
+190ea4898809de6cf379afe318f5fa9564686157b24d9a2d7f5698b0c977d8b2 android.hardware.graphics.bufferqueue@1.0::IGraphicBufferProducer
+25892789b50eb673506b6c5a2cdab5d9aa428d41608aab10280cc898538b524a android.hardware.graphics.composer@2.1::IComposerClient
+e205dd30f5ff99445b706a901de8ebc46c379e9d7c1921d6a327ed2082cfa83d android.hardware.graphics.composer@2.1::types
+a46251718abfada458dc64c41ce94915757bf6c87cfa2d9e99cfb01fa8e32331 android.hardware.graphics.mapper@2.0::IMapper
+bd33ac23c57b4a07632691d2191bc2c93930f57e62f4ccf459748fdaa5c0f480 android.hardware.graphics.mapper@2.0::types
+ad8a28ca3a5549fb9bc24cf5f80ac8f660cc27be885210d76266780aa52ddb8d android.hardware.keymaster@3.0::types
+5804ca86611d72e5481f022b3a0c1b334217f2e4988dad25730c42af2d1f4d1c android.hardware.neuralnetworks@1.0::IDevice
+12e8dca4ab7d8aadd0ef8f1b438021938e2396139e85db2ed65783b08800aa52 android.hardware.neuralnetworks@1.0::IExecutionCallback
+86b77e06da756a76aa3685be88765852dd982a86d8c90b8b4fc1130ed4184c8f android.hardware.neuralnetworks@1.0::types
+d4840db8efabdf1e4b344fc981cd36e5fe81a39aff6e199f6d06c1c8da413efd android.hardware.radio@1.0::types
+f96cbc59dfe16c8d0c2a7e06db24d8738a6328b6e90f7b8e1640ea2b4600debd android.hardware.radio@1.1::ISap
+2d86929794795e5c70f4fdb5073485fd05835c9c6f496116687c3d9f32e6df3e android.hardware.radio@1.2::ISap
+905a4af79c8329b39d8b11b08f015137216bb078b427b6986f32884a04bc1bec android.hardware.tv.cec@1.0::types
+aebcd9ff2da05c9d4c439916f40dfd219ba7629919007cb981ebf150064b4f82 android.hardware.usb@1.1::IUsb
+e29fb1941b40a990676f8e9c676a38761defd890b81a9c034608eb7ba6496023 android.hardware.wifi@1.0::IWifiP2pIface
+b280c4704dfcc548a9bf127b59b7c3578f460c50cce70a06b66fe0df8b27cff0 android.hardware.wifi@1.0::types
+
+# HALs released in Android P
+5860cf040a3d5d771967ecf648b00d06876a7120da985ee2b3e95d01f634dd20 android.hardware.audio@4.0::IDevice
+cf82a0249e918fdc657e189895e92d60af0491868477e82cdc30f6cab0ca2c65 android.hardware.audio@4.0::IDevicesFactory
+be3dc9baed45a0d330152eca3ca24fa419b375b20a41644c88d4fb46b72784d2 android.hardware.audio@4.0::IPrimaryDevice
+3e3acb70c4e6c7d578f511f4a44ee764ab9126f887a3bf65d523c42e40012bf6 android.hardware.audio@4.0::IStream
+d5de64e66b95f135dd42492250a309134b8227203ef3524440798c66b6f5a392 android.hardware.audio@4.0::IStreamIn
+888ac906461327fa0bd93854d5109be8c292a33afdb467164826970a8bd5b789 android.hardware.audio@4.0::IStreamOut
+15f6ae78e73344c8e7d68847ef03caec64fcd9f951bbcf59957d1712c247fcff android.hardware.audio@4.0::IStreamOutCallback
+61f0eaa4d08547d039e9b1dd7c82abe2c004286d1b9b8153c2491ff46a8a63ca android.hardware.audio@4.0::types
+5d47a2ad2c136b8aba067dd45bb10d0ad390dd76340764154f580658f98f4fe6 android.hardware.audio.common@4.0::types
+b04b6b364938b80008e61fa2e318bc299622433e57c2e1f6cfba332a3f6e3f15 android.hardware.audio.effect@4.0::IAcousticEchoCancelerEffect
+1c17d4ece5c8ba3f7a646a305ee0dd109b0d51372e1bd585812e513cd40e1852 android.hardware.audio.effect@4.0::IAutomaticGainControlEffect
+34174259fe6fbb1bb14e7103e097f2f25529271a676687845b2f55d6d0d9d617 android.hardware.audio.effect@4.0::IBassBoostEffect
+7a18e9bd0163f3784448f6e24be0db75f877e2f0f9bd0d7ec427f1c34b382c0b android.hardware.audio.effect@4.0::IDownmixEffect
+bac81bffbe2661d5b6839087d2dd3a27eded66e60c6c76d35c68d54014cd5c06 android.hardware.audio.effect@4.0::IEffect
+65f0bcf9e498b26f3266ad10cf513a6c2b5906cc49f9db4bc5c7d3ba11a72e05 android.hardware.audio.effect@4.0::IEffectBufferProviderCallback
+5a746e81175489eb2371b88864c36c9bb63bc64ef799fae74cd96003b013c0d1 android.hardware.audio.effect@4.0::IEffectsFactory
+839980c7c5be79da6b95fdb9354a62b04407b4b084749b7a21d2c340773d7638 android.hardware.audio.effect@4.0::IEnvironmentalReverbEffect
+2805fbdac7cff050a1c095b9276bb41ac02a3b7b354336817487eb9a4b6bb462 android.hardware.audio.effect@4.0::IEqualizerEffect
+a91b547f5922f39fe4231d97fac1c3825c1c1b0c8ef7a5136689ceed37e8bfe9 android.hardware.audio.effect@4.0::ILoudnessEnhancerEffect
+1145f5b921ddec184fda5bdc87487b46f2a89cd9f42cc882bbb3a54f4ac80466 android.hardware.audio.effect@4.0::INoiseSuppressionEffect
+3661fa0623056922fdc4235ac5a9c91a2d066ab6f1ab4297e3b240fe302ba500 android.hardware.audio.effect@4.0::IPresetReverbEffect
+e88e520f8c98a62fccd8d5316c6687808f775de145d1405a7a9a66587ee6a001 android.hardware.audio.effect@4.0::IVirtualizerEffect
+fe28829dab10d171783b79ac9cc45412739f8ff275e90228d7c6370ef189b859 android.hardware.audio.effect@4.0::IVisualizerEffect
+21c8a702579356480236c6851b5b2c16b9bd369ce12bdd6ffdc4626a89f34f73  android.hardware.audio.effect@4.0::types
+42a06dc288f61b0690580f3d37b30b663c31d74d50bb58d0772386b550d5faab android.hardware.authsecret@1.0::IAuthSecret
+32cc50cc2a7658ec613c0c2dd2accbf6a05113b749852879e818b8b7b438db19 android.hardware.bluetooth.a2dp@1.0::IBluetoothAudioHost
+ff4be64d7992f8bec97dff37f35450e79b3430c61f85f54322ce45bef229dc3b android.hardware.bluetooth.a2dp@1.0::IBluetoothAudioOffload
+27f22d2e873e6201f9620cf4d8e2facb25bd0dd30a2b911e441b4600d560fa62 android.hardware.bluetooth.a2dp@1.0::types
+3d8ed67d807e9f15d0708390a416bee00920f6a22196c104cc9e443c8d217df8 android.hardware.broadcastradio@2.0::IAnnouncementListener
+44017c42e6f4d8cb30f07eb1da04540a98736a336ac28c7e0ed2e69e1589f8d1 android.hardware.broadcastradio@2.0::IBroadcastRadio
+e5f4960290b4f3089163dd43251e1a032c81e9bdb796e75a87fc7c5810c262b3 android.hardware.broadcastradio@2.0::ICloseHandle
+af24b87ca8b8f02fcde205e47db6a9609fc7e9d77d73e694ec8f9c508ca19575 android.hardware.broadcastradio@2.0::ITunerCallback
+d70464c517a4a1b5167730843775a97f455102919e945b04f717b9da390c0f39 android.hardware.broadcastradio@2.0::ITunerSession
+2afa59ebf8145e7fbc090cf49605c27280c07d4178d47cd7f9d82b3b95a47af0 android.hardware.broadcastradio@2.0::types
+4fb0725c36ed4f77a42b42e3f18d8b5f7919cb62b90098b23143a555aa7dd96d android.hardware.camera.device@3.4::ICameraDeviceCallback
+812fa66aa10ba0cba27cfddc2fd7f0ee27a8ab65a1f15aa79fdad97d403e6a14 android.hardware.camera.device@3.4::ICameraDeviceSession
+cc288f1f78d1e643eb3d3dbc16e1401d44033d8e6856761f5156814a29986ec7 android.hardware.camera.device@3.4::types
+f9278c8beb9d42d96e26d73ecabe1dff1d7e2fb301ab7f737d93e5ffae8d3312 android.hardware.camera.metadata@3.3::types
+f858091b10f7d5927be60573c06df4805275d37226bbb41a732190bfb81457ec android.hardware.configstore@1.1::ISurfaceFlingerConfigs
+5b0fb9842f8b0eb3730b93c30a7925290ab44763ab86bb493bfa58d0f2eeb369 android.hardware.configstore@1.1::types
+1a46aeae45b7a0e47f79b7207300532986f9d9cd7060779afc7a529f54d712ab android.hardware.confirmationui@1.0::IConfirmationResultCallback
+6d8347ff3cd7de471065ac3e8e68385073630cdeebe9f8fa58cb91cf44436c95 android.hardware.confirmationui@1.0::IConfirmationUI
+a3ff916784dce87a56c757ab5c86433f0cdf562280999a5f978a6e8a0f3f19e7 android.hardware.confirmationui@1.0::types
+1fbf2d7e383632216aaaa1d972a21a618f55659263d2e6f0b309e3cb323b4b63 android.hardware.drm@1.1::ICryptoFactory
+7877ff8e4c1e48b825e6e5e66d050288e5656ed535c61cc7830a92ed4a9e1990 android.hardware.drm@1.1::IDrmFactory
+fef2f0ebde7704548fb203df46673ceb342272fc4fa9d0af25a980d2584a36e7 android.hardware.drm@1.1::IDrmPlugin
+5047a346ecce239404b9020959f60dd467318e9c17b290a6386bc3894df62c3c android.hardware.drm@1.1::types
+a830336ac8627d6432cfafb1b884343ad9f885dee0a5323e380e6d3c519156b8 android.hardware.gnss@1.1::IGnss
+8ad55bc35bb3a83e65c018bdfde7ae5ebc749ff2bf6b79412ded0bc6c89b97d8 android.hardware.gnss@1.1::IGnssCallback
+3c5183d7506010be57e0f748e3640fc2ded1ba955784b6256ba427f4c399591c android.hardware.gnss@1.1::IGnssConfiguration
+1a07d1383e847c3deb696ec7a2c9e33b9683772945660448a010b18063da67a4 android.hardware.gnss@1.1::IGnssMeasurement
+83e7a10ff3702147bd7ffa04567b20d407a3b16bbb7705644af44d919afe9103 android.hardware.gnss@1.1::IGnssMeasurementCallback
+0b96e0254e2168cfecb30c1ed5fb42681652cc00faa68c6e07568fafe64d1d50 android.hardware.graphics.common@1.1::types
+7d2cef99c838fb58038de8bbfd3cdb76ff4797241987077721715297f8d45e34 android.hardware.graphics.common@1.1::types # b/78135149
+d9b40a5b09962a5a0780b10fe33a4e607e69e2e088fc83de88a584115b7cb1c0 android.hardware.graphics.composer@2.2::IComposer
+a2f183f7fcc79aabedaef11095ab223aac0ed5ef984d850893872515e7f560c7 android.hardware.graphics.composer@2.2::IComposerClient
+dd83be076b6b3f10ed62ab34d8c8b95f2415961fb785200eb842e7bfb2b0ee92 android.hardware.graphics.mapper@2.1::IMapper
+675682dd3007805c985eaaec91612abc88f4c25b3431fb84070b7584a1a741fb android.hardware.health@2.0::IHealth
+434c4c32c00b0e54bb05e40c79503208b40f786a318029a2a4f66e34f10f2a76 android.hardware.health@2.0::IHealthInfoCallback
+c9e498f1ade5e26f00d290b4763a9671ec6720f915e7d592844b62e8cb1f9b5c android.hardware.health@2.0::types
+201f9723353fdbd40bf3705537fb7e015e4c399879425e68688fe0f43606ea4d android.hardware.keymaster@4.0::IKeymasterDevice
+1b7d2090c0a28b229d37c4b96160796b1f0d703950ac6ccc163fccd280830503 android.hardware.keymaster@4.0::types
+6d5c646a83538f0f9d8438c259932509f4353410c6c76e56db0d6ca98b69c3bb android.hardware.media.bufferpool@1.0::IAccessor
+b8c7ed58aa8740361e63d0ce9e7c94227572a629f356958840b34809d2393a7c android.hardware.media.bufferpool@1.0::IClientManager
+4a2c0dc82780e6c90731725a103feab8ab6ecf85a64e049b9cbd2b2c61620fe1 android.hardware.media.bufferpool@1.0::IConnection
+6aef1218e5949f867b0104752ac536c1b707222a403341720de90141df129e3e android.hardware.media.bufferpool@1.0::types
+7698dc2382a2eeb43541840e3ee624f34108efdfb976b2bfa7c13ef15fb8c4c4 android.hardware.neuralnetworks@1.1::IDevice
+72cc6126632456e8fbb8776fe50150c3c4dd5d09145653193affb70785211dfa android.hardware.neuralnetworks@1.1::types
+8d3d86da0bfa4bf070970d8303c659f67f35d670c287d45a3f542e4fedadd578 android.hardware.nfc@1.1::INfc
+e85f566698d2a2c28100e264fcf2c691a066756ddf8dd341d009ff50cfe10614 android.hardware.nfc@1.1::INfcClientCallback
+5e278fcaa3287d397d8eebe1c22aaa28150f5caae1cf9381cd6dc32cb37899c5 android.hardware.nfc@1.1::types
+163e115e833fc1d77cdd4a8cf0c833bb8b8d74fe35c880fe693101d17774926f android.hardware.power@1.2::IPower
+7899b9305587b2d5cd74a3cc87e9090f58bf4ae74256ce3ee36e7ec011822840 android.hardware.power@1.2::types
+ab132c990a62f0aca35871c092c22fb9c85d478e22124ef6a4d0a2302da76a9f android.hardware.radio@1.2::IRadio
+cda752aeabaabc20486a82ac57a3dd107785c006094a349bc5e224e8aa22a17c android.hardware.radio@1.2::IRadioIndication
+da8c6ae991c6a4b284cc6e445332e064e28ee8a09482ed5afff9d159ec6694b7 android.hardware.radio@1.2::IRadioResponse
+b65332996eb39ba63300a1011404141fa59ce5c252bc17afae637be6eeca5f55 android.hardware.radio@1.2::ISap
+a9361522cc97ef66209d39ba324095b2f08344054bb4d3481e803eee0480623a android.hardware.radio@1.2::types
+87385469cf4409f0f33b01508e7a477cf71f2a11e466dd7e3ab5971a1baaa72b android.hardware.radio.config@1.0::IRadioConfig
+228b2ee3c8c276c9f0afad2dc313ca3d6bbd9e482ddf313c7204c60ad9b636ab android.hardware.radio.config@1.0::IRadioConfigIndication
+a2e9b7aa09f79426f765838174e04b6f9a3e6c8b76b923fc1705632207bad44b android.hardware.radio.config@1.0::IRadioConfigResponse
+4307696b64ded9bd8de06887f9dfc533e875c4e0d83b8008df4d705164bde0b1 android.hardware.radio.config@1.0::types
+bd7699f07ba5392310fefd33ea964e01f4f4a66015146845c85055004823cc81 android.hardware.secure_element@1.0::ISecureElement
+a65aa82bbe48d81a9ae9e86247bb1b89fd2d3138d4053d7a5b716c71149b7dee android.hardware.secure_element@1.0::ISecureElementHalCallback
+2984c069f48ba35cd1bf49b0e17daad0d418fef52cb7a4a84dba0043114063d4 android.hardware.secure_element@1.0::types
+b4f507b4dc9b5cd5f0e4445926acb7d94525ae60dc307b3951142283632207b6 android.hardware.soundtrigger@2.1::ISoundTriggerHw
+92c2cc0f06ef744c5bda21f1d660258f7937203109b493eee22c3f3e2dbb0d3e android.hardware.soundtrigger@2.1::ISoundTriggerHwCallback
+8ddfa7542772cc7bca19972b2d856264efa31914bfd098aeb7c2079d950194cb android.hardware.usb.gadget@1.0::IUsbGadget
+ad0a620cda08f01b151c30cb7afa23b0637cc84340cf8dec00ac8e32cf54a8db android.hardware.usb.gadget@1.0::IUsbGadgetCallback
+51fc20f223561ac3a32ace3217837ef3860265bd91c8b7ae3859532caef9bc39 android.hardware.usb.gadget@1.0::types
+1bfc9fd9536ed09f04bcaf222a332bc919f1565d4d08bddccdebe1bfca8f01b5 android.hardware.vibrator@1.2::IVibrator
+a0aefa29881235c21e4761d15c55edc35ef85c2e0d9e01d0966176d1dbf5f811 android.hardware.vibrator@1.2::types
+8bc75a0dfac15c6f87ffec950b76c7d7de30d516b54e8e0b1f3c0ff9c7c6873b android.hardware.wifi@1.2::IWifi
+780c16fdeda13b779d993953a67f7ca578c938a172a9424c1c715ae81bc40fd7 android.hardware.wifi@1.2::IWifiChip
+167af870fdb87e1cbbaa0fa62ef35e1031caad20dd1ba695983dedb1e9993486 android.hardware.wifi@1.2::IWifiChipEventCallback
+8c7ef32fc78d5ec6e6956de3784cc2c6f42614b5272d2e461f6d60534ba38ec2 android.hardware.wifi@1.2::IWifiNanIface
+1e6074efad9da333803fb7c1acdb719d51c30b2e1e92087b0420341631c30b60 android.hardware.wifi@1.2::IWifiNanIfaceEventCallback
+f5682dbf19f712bef9cc3faa5fe3dc670b6ffbcb62a147a1d86b9d43574cd83f android.hardware.wifi@1.2::IWifiStaIface
+6db2e7d274be2dca9bf3087afd1f774a68c99d2b4dc7eeaf41690e5cebcbef7a android.hardware.wifi@1.2::types
+ee08280de21cb41e3ec26d6ed636c701b7f70516e71fb22f4fe60a13e603f406 android.hardware.wifi.hostapd@1.0::IHostapd
+b2479cd7a417a1cf4f3a22db4e4579e21bac38fdcaf381e2bf10176d05397e01 android.hardware.wifi.hostapd@1.0::types
+e362203b941f18bd4cba29a62adfa02453ed00d6be5b72cdb6c4d7e0bf394a40 android.hardware.wifi.supplicant@1.1::ISupplicant
+21757d0e5dd4b7e4bd981a4a20531bca3c32271ad9777b17b74eb5a1ea508384 android.hardware.wifi.supplicant@1.1::ISupplicantStaIface
+cd4330c3196bda1d642a32abfe23a7d64ebfbda721940643af6867af3b3f0aa9 android.hardware.wifi.supplicant@1.1::ISupplicantStaIfaceCallback
+10ff2fae516346b86121368ce5790d5accdfcb73983246b813f3d488b66db45a android.hardware.wifi.supplicant@1.1::ISupplicantStaNetwork
diff --git a/prebuilt_hashes/Android.bp b/prebuilt_hashes/Android.bp
new file mode 100644
index 0000000..4692b76
--- /dev/null
+++ b/prebuilt_hashes/Android.bp
@@ -0,0 +1,30 @@
+// Copyright (C) 2018 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+python_binary_host {
+    name: "dump_hals_for_release",
+
+    srcs: [
+        "dump_hals_for_release.py",
+    ],
+
+    version: {
+        py2: {
+            enabled: true,
+        },
+        py3: {
+            enabled: false,
+        },
+    },
+}
diff --git a/prebuilt_hashes/dump_hals_for_release.py b/prebuilt_hashes/dump_hals_for_release.py
new file mode 100755
index 0000000..fee12ab
--- /dev/null
+++ b/prebuilt_hashes/dump_hals_for_release.py
@@ -0,0 +1,136 @@
+#!/usr/bin/env python
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""
+Dump new HIDL types that are introduced in each dessert release.
+"""
+
+from __future__ import print_function
+
+import argparse
+import collections
+import json
+import os
+import re
+
+class Globals:
+    pass
+
+class Constants:
+    CURRENT = 'current'
+    HAL_PATH_PATTERN = r'/((?:[a-zA-Z_]+/)*)(\d+\.\d+)/([a-zA-Z_]+).hal'
+    CURRENT_TXT_PATTERN = r'(?:.*/)?([0-9]+|current).txt'
+
+def trim_trailing_comments(line):
+    idx = line.find('#')
+    if idx < 0: return line
+    return line[0:idx]
+
+def strip_begin(s, prefix):
+    if s.startswith(prefix):
+        return strip_begin(s[len(prefix):], prefix)
+    return s
+
+def strip_end(s, suffix):
+    if s.endswith(suffix):
+        return strip_end(s[0:-len(suffix)], suffix)
+    return s
+
+def get_interfaces(file_name):
+    with open(file_name) as file:
+        for line in file:
+            line_tokens = trim_trailing_comments(line).strip().split()
+            if not line_tokens:
+                continue
+            assert len(line_tokens) == 2, \
+                "Unrecognized line in file {}:\n{}".format(file_name, line)
+            yield line_tokens[1]
+
+def api_level_to_int(api_level):
+    try:
+        if api_level == Constants.CURRENT: return float('inf')
+        return int(api_level)
+    except ValueError:
+        return None
+
+def get_interfaces_from_package_root(package, root):
+    root = strip_end(root, '/')
+    for dirpath, _, filenames in os.walk(root, topdown=False):
+        dirpath = strip_begin(dirpath, root)
+        for filename in filenames:
+            filepath = os.path.join(dirpath, filename)
+            mo = re.match(Constants.HAL_PATH_PATTERN, filepath)
+            if not mo:
+                continue
+            yield '{}.{}@{}::{}'.format(
+                package, mo.group(1).strip('/').replace('/', '.'), mo.group(2), mo.group(3))
+
+def filter_out(iterable):
+    return iterable if not Globals.filter_out else filter(
+        lambda s: all(re.search(pattern, s) is None for pattern in Globals.filter_out),
+        iterable)
+
+def main():
+    parser = argparse.ArgumentParser(description=__doc__)
+    parser.add_argument('--pretty', help='Print pretty JSON', action='store_true')
+    parser.add_argument('--package-root', metavar='PACKAGE:PATH', nargs='*',
+        help='package root of current directory, e.g. android.hardware:hardware/interfaces')
+    parser.add_argument('--filter-out', metavar='REGEX', nargs='*',
+        help='A regular expression that filters out interfaces.')
+    parser.add_argument('hashes', metavar='FILE', nargs='*',
+        help='Locations of current.txt for each release.')
+    parser.parse_args(namespace=Globals)
+
+    interfaces_for_level = dict()
+
+    for filename in Globals.hashes or tuple():
+        mo = re.match(Constants.CURRENT_TXT_PATTERN, filename)
+        assert mo is not None, \
+            'Input hash file names must have the format {} but is {}'.format(Constants.CURRENT_TXT_PATTERN, filename)
+
+        api_level = mo.group(1)
+        assert api_level_to_int(api_level) is not None
+
+        if api_level not in interfaces_for_level:
+            interfaces_for_level[api_level] = set()
+        interfaces_for_level[api_level].update(filter_out(get_interfaces(filename)))
+
+    for package_root in Globals.package_root or tuple():
+        tup = package_root.split(':')
+        assert len(tup) == 2, \
+            '--package-root must have the format PACKAGE:PATH, but is {}'.format(package_root)
+        if Constants.CURRENT not in interfaces_for_level:
+            interfaces_for_level[Constants.CURRENT] = set()
+        interfaces_for_level[Constants.CURRENT].update(filter_out(get_interfaces_from_package_root(*tup)))
+
+    seen_interfaces = set()
+    new_interfaces_for_level = collections.OrderedDict()
+    for level, interfaces in sorted(interfaces_for_level.items(), key=lambda tup: api_level_to_int(tup[0])):
+        if level != Constants.CURRENT:
+            removed_interfaces = seen_interfaces - interfaces
+            assert not removed_interfaces, \
+                "The following interfaces are removed from API level {}:\n{}".format(
+                    level, removed_interfaces)
+        new_interfaces_for_level[level] = sorted(interfaces - seen_interfaces)
+        seen_interfaces.update(interfaces)
+
+    print(json.dumps(new_interfaces_for_level,
+        separators=None if Globals.pretty else (',',':'),
+        indent=4 if Globals.pretty else None))
+
+if __name__ == '__main__':
+    main()
diff --git a/radio/1.0/types.hal b/radio/1.0/types.hal
index ab1834b..17718e0 100644
--- a/radio/1.0/types.hal
+++ b/radio/1.0/types.hal
@@ -1500,9 +1500,10 @@
 };
 
 struct CellIdentityGsm {
-    string mcc;                           // 3-digit Mobile Country Code, 0..999, INT_MAX if unknown
-    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if
+    string mcc;                           // 3-digit Mobile Country Code, 0..999, empty string if
                                           // unknown
+    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, empty string
+                                          // if unknown
     int32_t lac;                          // 16-bit Location Area Code, 0..65535, INT_MAX if unknown
     int32_t cid;                          // 16-bit GSM Cell Identity described in
                                           // TS 27.007, 0..65535, INT_MAX if unknown
@@ -1512,8 +1513,9 @@
 };
 
 struct CellIdentityWcdma {
-    string mcc;                           // 3-digit Mobile Country Code, 0..999, INT_MAX if unknown
-    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, INT_MAX
+    string mcc;                           // 3-digit Mobile Country Code, 0..999, empty string if
+                                          // unknown
+    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, empty string
                                           // if unknown
     int32_t lac;                          // 16-bit Location Area Code, 0..65535, INT_MAX if unknown
     int32_t cid;                          // 28-bit UMTS Cell Identity described in
@@ -1541,9 +1543,10 @@
 };
 
 struct CellIdentityLte {
-    string mcc;                           // 3-digit Mobile Country Code, 0..999, INT_MAX if unknown
-    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if
+    string mcc;                           // 3-digit Mobile Country Code, 0..999, empty string if
                                           // unknown
+    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, empty string
+                                          // if unknown
     int32_t ci;                           // 28-bit Cell Identity described in TS TS 27.007, INT_MAX
                                           // if unknown
     int32_t pci;                          // physical cell id 0..503; this value must be valid
@@ -1553,9 +1556,10 @@
 };
 
 struct CellIdentityTdscdma {
-    string mcc;                           // 3-digit Mobile Country Code, 0..999, INT_MAX if unknown
-    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if
+    string mcc;                           // 3-digit Mobile Country Code, 0..999, empty string if
                                           // unknown
+    string mnc;                           // 2 or 3-digit Mobile Network Code, 0..999, empty string
+                                          // if unknown
     int32_t lac;                          // 16-bit Location Area Code, 0..65535, INT_MAX if
                                           // unknown
     int32_t cid;                          // 28-bit UMTS Cell Identity described in
diff --git a/radio/1.0/vts/functional/Android.bp b/radio/1.0/vts/functional/Android.bp
index afbb1c4..9dec2f2 100644
--- a/radio/1.0/vts/functional/Android.bp
+++ b/radio/1.0/vts/functional/Android.bp
@@ -33,6 +33,7 @@
     static_libs: [
         "android.hardware.radio@1.0",
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -46,6 +47,7 @@
     static_libs: [
         "android.hardware.radio@1.0",
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_library_static {
diff --git a/radio/1.0/vts/functional/radio_hidl_hal_data.cpp b/radio/1.0/vts/functional/radio_hidl_hal_data.cpp
index 4f10f11..eaef3ed 100644
--- a/radio/1.0/vts/functional/radio_hidl_hal_data.cpp
+++ b/radio/1.0/vts/functional/radio_hidl_hal_data.cpp
@@ -32,6 +32,67 @@
 
     if (cardStatus.cardState == CardState::ABSENT) {
         EXPECT_EQ(RadioError::NONE, radioRsp->rspInfo.error);
+    } else if (cardStatus.cardState == CardState::PRESENT) {
+        ASSERT_TRUE(CheckAnyOfErrors(
+            radioRsp->rspInfo.error,
+            {RadioError::NONE, RadioError::NOT_PROVISIONED, RadioError::CANCELLED}));
+
+        // Check the mcc [0, 999] and mnc [0, 999].
+        string hidl_mcc;
+        string hidl_mnc;
+        bool checkMccMnc = true;
+        int totalIdentitySizeExpected = 1;
+        CellIdentity cellIdentities = radioRsp->dataRegResp.cellIdentity;
+        CellInfoType cellInfoType = cellIdentities.cellInfoType;
+
+        if (cellInfoType == CellInfoType::NONE) {
+            // All the fields are 0
+            totalIdentitySizeExpected = 0;
+            checkMccMnc = false;
+        } else if (cellInfoType == CellInfoType::GSM) {
+            EXPECT_EQ(1, cellIdentities.cellIdentityGsm.size());
+            CellIdentityGsm cig = cellIdentities.cellIdentityGsm[0];
+            hidl_mcc = cig.mcc;
+            hidl_mnc = cig.mnc;
+        } else if (cellInfoType == CellInfoType::LTE) {
+            EXPECT_EQ(1, cellIdentities.cellIdentityLte.size());
+            CellIdentityLte cil = cellIdentities.cellIdentityLte[0];
+            hidl_mcc = cil.mcc;
+            hidl_mnc = cil.mnc;
+        } else if (cellInfoType == CellInfoType::WCDMA) {
+            EXPECT_EQ(1, cellIdentities.cellIdentityWcdma.size());
+            CellIdentityWcdma ciw = cellIdentities.cellIdentityWcdma[0];
+            hidl_mcc = ciw.mcc;
+            hidl_mnc = ciw.mnc;
+        } else if (cellInfoType == CellInfoType::TD_SCDMA) {
+            EXPECT_EQ(1, cellIdentities.cellIdentityTdscdma.size());
+            CellIdentityTdscdma cit = cellIdentities.cellIdentityTdscdma[0];
+            hidl_mcc = cit.mcc;
+            hidl_mnc = cit.mnc;
+        } else {
+            // CellIndentityCdma has no mcc and mnc.
+            EXPECT_EQ(CellInfoType::CDMA, cellInfoType);
+            EXPECT_EQ(1, cellIdentities.cellIdentityCdma.size());
+            checkMccMnc = false;
+        }
+
+        // Check only one CellIdentity is size 1, and others must be 0.
+        EXPECT_EQ(totalIdentitySizeExpected, cellIdentities.cellIdentityGsm.size() +
+                                                 cellIdentities.cellIdentityCdma.size() +
+                                                 cellIdentities.cellIdentityLte.size() +
+                                                 cellIdentities.cellIdentityWcdma.size() +
+                                                 cellIdentities.cellIdentityTdscdma.size());
+
+        if (checkMccMnc) {
+            // 32 bit system gets result: "\xff\xff\xff..." from RIL, which is not testable. Only
+            // test for 64 bit here. TODO: remove this limit after b/113181277 being fixed.
+            if (hidl_mcc.size() < 4 && hidl_mnc.size() < 4) {
+                int mcc = stoi(hidl_mcc);
+                int mnc = stoi(hidl_mnc);
+                EXPECT_TRUE(mcc >= 0 && mcc <= 999);
+                EXPECT_TRUE(mnc >= 0 && mnc <= 999);
+            }
+        }
     }
 }
 
diff --git a/radio/1.0/vts/functional/radio_hidl_hal_utils_v1_0.h b/radio/1.0/vts/functional/radio_hidl_hal_utils_v1_0.h
index f5ce072..23bc434 100644
--- a/radio/1.0/vts/functional/radio_hidl_hal_utils_v1_0.h
+++ b/radio/1.0/vts/functional/radio_hidl_hal_utils_v1_0.h
@@ -60,6 +60,9 @@
     uint32_t writeSmsToSimIndex;
     uint32_t writeSmsToRuimIndex;
 
+    // Data
+    DataRegStateResult dataRegResp;
+
     RadioResponse(RadioHidlTest& parent);
 
     virtual ~RadioResponse() = default;
diff --git a/radio/1.0/vts/functional/radio_response.cpp b/radio/1.0/vts/functional/radio_response.cpp
index 93d5557..f3938a9 100644
--- a/radio/1.0/vts/functional/radio_response.cpp
+++ b/radio/1.0/vts/functional/radio_response.cpp
@@ -157,8 +157,9 @@
 }
 
 Return<void> RadioResponse::getDataRegistrationStateResponse(
-    const RadioResponseInfo& info, const DataRegStateResult& /*dataRegResponse*/) {
+    const RadioResponseInfo& info, const DataRegStateResult& dataRegResponse) {
     rspInfo = info;
+    dataRegResp = dataRegResponse;
     parent.notify(info.serial);
     return Void();
 }
diff --git a/radio/1.0/vts/functional/vts_test_util.cpp b/radio/1.0/vts/functional/vts_test_util.cpp
index 7d15f35..ec96e5f 100644
--- a/radio/1.0/vts/functional/vts_test_util.cpp
+++ b/radio/1.0/vts/functional/vts_test_util.cpp
@@ -53,4 +53,4 @@
         }
     }
     return testing::AssertionFailure() << "SapError:" + toString(err) + " is returned";
-}
+}
\ No newline at end of file
diff --git a/radio/1.1/vts/functional/Android.bp b/radio/1.1/vts/functional/Android.bp
index e7195ee..5695c6b 100644
--- a/radio/1.1/vts/functional/Android.bp
+++ b/radio/1.1/vts/functional/Android.bp
@@ -30,4 +30,5 @@
     header_libs: [
         "radio.util.header@1.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/radio/1.2/vts/functional/Android.bp b/radio/1.2/vts/functional/Android.bp
index a4e8c02..6782f14 100644
--- a/radio/1.2/vts/functional/Android.bp
+++ b/radio/1.2/vts/functional/Android.bp
@@ -31,4 +31,5 @@
         "android.hardware.radio@1.0",
     ],
     header_libs: ["radio.util.header@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/radio/1.2/vts/functional/radio_hidl_hal_api.cpp b/radio/1.2/vts/functional/radio_hidl_hal_api.cpp
index 3510163..730d969 100644
--- a/radio/1.2/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.2/vts/functional/radio_hidl_hal_api.cpp
@@ -753,6 +753,56 @@
     ASSERT_TRUE(CheckAnyOfErrors(
         radioRsp_v1_2->rspInfo.error,
         {RadioError::NONE, RadioError::RADIO_NOT_AVAILABLE, RadioError::NOT_PROVISIONED}));
+
+    // Check the mcc [0, 999] and mnc [0, 999].
+    string hidl_mcc;
+    string hidl_mnc;
+    int totalIdentitySizeExpected = 1;
+    ::android::hardware::radio::V1_2::CellIdentity cellIdentities =
+        radioRsp_v1_2->dataRegResp.cellIdentity;
+    CellInfoType cellInfoType = cellIdentities.cellInfoType;
+
+    if (cellInfoType == CellInfoType::NONE) {
+        // All the fields are 0
+        totalIdentitySizeExpected = 0;
+    } else if (cellInfoType == CellInfoType::GSM) {
+        EXPECT_EQ(1, cellIdentities.cellIdentityGsm.size());
+        ::android::hardware::radio::V1_2::CellIdentityGsm cig = cellIdentities.cellIdentityGsm[0];
+        hidl_mcc = cig.base.mcc;
+        hidl_mnc = cig.base.mnc;
+    } else if (cellInfoType == CellInfoType::LTE) {
+        EXPECT_EQ(1, cellIdentities.cellIdentityLte.size());
+        ::android::hardware::radio::V1_2::CellIdentityLte cil = cellIdentities.cellIdentityLte[0];
+        hidl_mcc = cil.base.mcc;
+        hidl_mnc = cil.base.mnc;
+    } else if (cellInfoType == CellInfoType::WCDMA) {
+        EXPECT_EQ(1, cellIdentities.cellIdentityWcdma.size());
+        ::android::hardware::radio::V1_2::CellIdentityWcdma ciw =
+            cellIdentities.cellIdentityWcdma[0];
+        hidl_mcc = ciw.base.mcc;
+        hidl_mnc = ciw.base.mnc;
+    } else if (cellInfoType == CellInfoType::TD_SCDMA) {
+        EXPECT_EQ(1, cellIdentities.cellIdentityTdscdma.size());
+        ::android::hardware::radio::V1_2::CellIdentityTdscdma cit =
+            cellIdentities.cellIdentityTdscdma[0];
+        hidl_mcc = cit.base.mcc;
+        hidl_mnc = cit.base.mnc;
+    } else {
+        // CellIndentityCdma has no mcc and mnc.
+        EXPECT_EQ(CellInfoType::CDMA, cellInfoType);
+        EXPECT_EQ(1, cellIdentities.cellIdentityCdma.size());
+    }
+
+    // Check only one CellIdentity is size 1, and others must be 0.
+    EXPECT_EQ(totalIdentitySizeExpected,
+              cellIdentities.cellIdentityGsm.size() + cellIdentities.cellIdentityCdma.size() +
+                  cellIdentities.cellIdentityLte.size() + cellIdentities.cellIdentityWcdma.size() +
+                  cellIdentities.cellIdentityTdscdma.size());
+
+    int mcc = stoi(hidl_mcc);
+    int mnc = stoi(hidl_mnc);
+    EXPECT_TRUE(mcc >= 0 && mcc <= 999);
+    EXPECT_TRUE(mnc >= 0 && mnc <= 999);
 }
 
 /*
diff --git a/radio/1.2/vts/functional/radio_hidl_hal_utils_v1_2.h b/radio/1.2/vts/functional/radio_hidl_hal_utils_v1_2.h
index 4712202..2e65bfb 100644
--- a/radio/1.2/vts/functional/radio_hidl_hal_utils_v1_2.h
+++ b/radio/1.2/vts/functional/radio_hidl_hal_utils_v1_2.h
@@ -56,6 +56,9 @@
 
     RadioResponseInfo rspInfo;
 
+    // Data
+    ::android::hardware::radio::V1_2::DataRegStateResult dataRegResp;
+
     RadioResponse_v1_2(RadioHidlTest_v1_2& parent_v1_2);
     virtual ~RadioResponse_v1_2() = default;
 
diff --git a/radio/1.2/vts/functional/radio_response.cpp b/radio/1.2/vts/functional/radio_response.cpp
index c5c7b14..e91a557 100644
--- a/radio/1.2/vts/functional/radio_response.cpp
+++ b/radio/1.2/vts/functional/radio_response.cpp
@@ -756,8 +756,9 @@
 
 Return<void> RadioResponse_v1_2::getDataRegistrationStateResponse_1_2(
     const RadioResponseInfo& info,
-    const ::android::hardware::radio::V1_2::DataRegStateResult& /*dataRegResponse*/) {
+    const ::android::hardware::radio::V1_2::DataRegStateResult& dataRegResponse) {
     rspInfo = info;
+    dataRegResp = dataRegResponse;
     parent_v1_2.notify(info.serial);
     return Void();
 }
diff --git a/radio/1.3/Android.bp b/radio/1.3/Android.bp
new file mode 100644
index 0000000..30b8edf
--- /dev/null
+++ b/radio/1.3/Android.bp
@@ -0,0 +1,22 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.radio@1.3",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "IRadio.hal",
+        "IRadioIndication.hal",
+        "IRadioResponse.hal",
+    ],
+    interfaces: [
+        "android.hardware.radio@1.0",
+        "android.hardware.radio@1.1",
+        "android.hardware.radio@1.2",
+        "android.hidl.base@1.0",
+    ],
+    gen_java: true,
+}
+
diff --git a/radio/1.3/IRadio.hal b/radio/1.3/IRadio.hal
new file mode 100644
index 0000000..2d64381
--- /dev/null
+++ b/radio/1.3/IRadio.hal
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.3;
+
+import @1.2::IRadio;
+import @1.1::RadioAccessSpecifier;
+
+/**
+ * Note: IRadio 1.3 is an intermediate layer between Android P and Android Q. It's specifically
+ * designed for CBRS related interfaces. All other interfaces for Q are added in IRadio 1.4.
+ *
+ * This interface is used by telephony and telecom to talk to cellular radio.
+ * All the functions have minimum one parameter:
+ * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
+ * duration of a method call. If clients provide colliding serials (including passing the same
+ * serial to different methods), multiple responses (one for each method call) must still be served.
+ * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication.
+ */
+interface IRadio extends @1.2::IRadio {
+    /**
+     * Specify which bands modem's background scan must act on.
+     * If specifyChannels is true, it only scans bands specified in specifiers.
+     * If specifyChannels is false, it scans all bands.
+     *
+     * For example, CBRS is only on LTE band 48. By specifying this band,
+     * modem saves more power.
+     *
+     * @param serial Serial number of request.
+     * @param specifyChannels whether to scan bands defined in specifiers.
+     * @param specifiers which bands to scan. Only used if specifyChannels is true.
+     *
+     * Response callback is IRadioResponse.setSystemSelectionChannelsResponse()
+     */
+    oneway setSystemSelectionChannels(int32_t serial, bool specifyChannels,
+            vec<RadioAccessSpecifier> specifiers);
+
+   /**
+    * Toggle logical modem on and off. It should put the logical modem in low power
+    * mode without any activity, while the SIM card remains visible. The difference
+    * with setRadioPower is, setRadioPower affects all logical modem while this controls
+    * just one.
+    *
+    * @param serial Serial number of request.
+    * @param on True to turn on the logical modem, otherwise turn it off.
+    *
+    * Response function is IRadioResponse.enableModemResponse()
+    */
+    oneway enableModem(int32_t serial, bool on);
+};
diff --git a/radio/1.3/IRadioIndication.hal b/radio/1.3/IRadioIndication.hal
new file mode 100644
index 0000000..b65d3f2
--- /dev/null
+++ b/radio/1.3/IRadioIndication.hal
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.3;
+
+import @1.2::IRadioIndication;
+
+/**
+ * Interface declaring unsolicited radio indications.
+ */
+interface IRadioIndication extends @1.2::IRadioIndication {
+};
diff --git a/radio/1.3/IRadioResponse.hal b/radio/1.3/IRadioResponse.hal
new file mode 100644
index 0000000..abdf2ee
--- /dev/null
+++ b/radio/1.3/IRadioResponse.hal
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.3;
+
+import @1.2::IRadioResponse;
+import @1.0::RadioResponseInfo;
+
+/**
+ * Note: IRadio 1.3 is an intermediate layer between Android P and Android Q. It's specifically
+ * designed for CBRS related interfaces. All other interfaces for Q are added in IRadio 1.4.
+ *
+ * Interface declaring response functions to solicited radio requests.
+ */
+interface IRadioResponse extends @1.2::IRadioResponse {
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:INVALID_ARGUMENTS
+     */
+    oneway setSystemSelectionChannelsResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     */
+    oneway enableModemResponse(RadioResponseInfo info);
+};
diff --git a/radio/1.4/Android.bp b/radio/1.4/Android.bp
new file mode 100644
index 0000000..ad114f3
--- /dev/null
+++ b/radio/1.4/Android.bp
@@ -0,0 +1,50 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.radio@1.4",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IRadio.hal",
+        "IRadioIndication.hal",
+        "IRadioResponse.hal",
+    ],
+    interfaces: [
+        "android.hardware.radio@1.0",
+        "android.hardware.radio@1.1",
+        "android.hardware.radio@1.2",
+        "android.hardware.radio@1.3",
+        "android.hidl.base@1.0",
+        "android.hidl.safe_union@1.0",
+    ],
+    types: [
+        "AccessNetwork",
+        "CardStatus",
+        "CellConfigLte",
+        "CellInfo",
+        "CellInfoLte",
+        "DataCallFailCause",
+        "DataConnActiveStatus",
+        "DataProfileInfo",
+        "DataRegStateResult",
+        "EmergencyNumber",
+        "EmergencyNumberSource",
+        "EmergencyServiceCategory",
+        "FrequencyRange",
+        "LteVopsInfo",
+        "NetworkScanResult",
+        "PdpProtocolType",
+        "PhysicalChannelConfig",
+        "RadioAccessFamily",
+        "RadioCapability",
+        "RadioFrequencyInfo",
+        "RadioTechnology",
+        "NrIndicators",
+        "SetupDataCallResult",
+    ],
+    gen_java: true,
+}
+
diff --git a/radio/1.4/IRadio.hal b/radio/1.4/IRadio.hal
new file mode 100644
index 0000000..8438777
--- /dev/null
+++ b/radio/1.4/IRadio.hal
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.0::Dial;
+import @1.2::DataRequestReason;
+import @1.3::IRadio;
+import @1.4::AccessNetwork;
+import @1.4::DataProfileInfo;
+import @1.4::EmergencyServiceCategory;
+import @1.4::RadioAccessFamily;
+
+/**
+ * This interface is used by telephony and telecom to talk to cellular radio.
+ * All the functions have minimum one parameter:
+ * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
+ * duration of a method call. If clients provide colliding serials (including passing the same
+ * serial to different methods), multiple responses (one for each method call) must still be served.
+ * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication.
+ */
+interface IRadio extends @1.3::IRadio {
+    /**
+     * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
+     * the data connection must be added to data calls and a unsolDataCallListChanged() must be
+     * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
+     * lost due to many factors, including deactivateDataCall() being issued, the radio powered
+     * off, reception lost or even transient factors like congestion. This data call list is
+     * returned by getDataCallList() and dataCallListChanged().
+     *
+     * The Radio is expected to:
+     *   - Create one data call context.
+     *   - Create and configure a dedicated interface for the context.
+     *   - The interface must be point to point.
+     *   - The interface is configured with one or more addresses and is capable of sending and
+     *     receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
+     *     for IPv6.
+     *   - Must not modify routing configuration related to this interface; routing management is
+     *     exclusively within the purview of the Android OS.
+     *   - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
+     *     in the response of getDataRegistrationState.
+     *
+     * @param serial Serial number of request.
+     * @param accessNetwork The access network to setup the data call. If the data connection cannot
+     *     be established on the specified access network, the setup request must be failed.
+     * @param dataProfileInfo Data profile info.
+     * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
+     * @param reason The request reason. Must be DataRequestReason.NORMAL or
+     *     DataRequestReason.HANDOVER.
+     * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
+     *     addresses of the existing data connection. The format is IP address with optional "/"
+     *     prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
+     *     "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
+     *     the prefix length is absent, then the addresses are assumed to be point to point with
+     *     IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored
+     *     unless reason is DataRequestReason.HANDOVER.
+     * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
+     *     addresses of the existing data connection. The format is defined in RFC-4291 section
+     *     2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
+     *     reason is DataRequestReason.HANDOVER.
+     *
+     * Response function is IRadioResponse.setupDataCallResponse()
+     *
+     * Note this API is same as 1.2 version except using the 1.4 AccessNetwork as the input param.
+     */
+    oneway setupDataCall_1_4(int32_t serial, AccessNetwork accessNetwork,
+            DataProfileInfo dataProfileInfo, bool roamingAllowed,
+            DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+
+    /**
+     * Set an apn to initial attach network
+     *
+     * @param serial Serial number of request.
+     * @param dataProfileInfo data profile containing APN settings
+     *
+     * Response callback is IRadioResponse.setInitialAttachApnResponse()
+     */
+    oneway setInitialAttachApn_1_4(int32_t serial, DataProfileInfo dataProfileInfo);
+
+    /**
+     * Send data profiles of the current carrier to the modem.
+     *
+     * @param serial Serial number of request.
+     * @param profiles Array of DataProfile to set.
+     *
+     * Response callback is IRadioResponse.setDataProfileResponse()
+     */
+    oneway setDataProfile_1_4(int32_t serial, vec<DataProfileInfo> profiles);
+
+    /**
+     * Initiate emergency voice call, with zero or more emergency service category(s).
+     *
+     * Note this API is the same as IRadio.dial except using the
+     * @1.4::EmergencyServiceCategory as the input param.
+     *
+     * If the number in the 'dialInfo' field is identified as an emergency number in Android,
+     * Android use this request for its emergency call instead of @1.0::IRadio.dial. The
+     * implementation decides how to handle the call (e.g. emergency routing or normal
+     * routing).
+     *
+     * If the dialed emergency number does not have a specified emergency service category, the
+     * 'categories' field is set to @1.4::EmergencyServiceCategory#UNSPECIFIED; iff either the
+     * 'categories' field is set to @1.4::EmergencyServiceCategory#UNSPECIFIED or the underlying
+     * technology used to request emergency services does not support the emergency service
+     * category, the interpretation of the categories is defined by implementation.
+     *
+     * Reference: 3gpp TS 22.101, Section 10 - Emergency Calls
+     *
+     * @param serial Serial number of request.
+     * @param dialInfo the same @1.0::Dial information used by @1.0::IRadio.dial.
+     * @param categories bitfield<@1.4::EmergencyServiceCategory> the Emergency Service Category(s)
+     *     of the call.
+     *
+     * Response function is IRadioResponse.emergencyDialResponse()
+     */
+    oneway emergencyDial(int32_t serial, Dial dialInfo,
+            bitfield<EmergencyServiceCategory> categories);
+
+    /**
+     * Query the preferred network type bitmap.
+     *
+     * @param serial Serial number of request.
+     *
+     * Response callback is IRadioResponse.getPreferredNetworkTypeBitmapResponse()
+     */
+    oneway getPreferredNetworkTypeBitmap(int32_t serial);
+
+    /**
+     * Requests to set the preferred network type for searching and registering.
+     *
+     * @param serial Serial number of request.
+     * @param networkTypeBitmap a 32-bit bitmap of RadioAccessFamily.
+     *
+     * Response callback is IRadioResponse.setPreferredNetworkTypeBitmapResponse()
+     */
+    oneway setPreferredNetworkTypeBitmap(
+            int32_t serial, bitfield<RadioAccessFamily> networkTypeBitmap);
+};
diff --git a/radio/1.4/IRadioIndication.hal b/radio/1.4/IRadioIndication.hal
new file mode 100644
index 0000000..626b494
--- /dev/null
+++ b/radio/1.4/IRadioIndication.hal
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.0::RadioIndicationType;
+import @1.3::IRadioIndication;
+
+/**
+ * Interface declaring unsolicited radio indications.
+ */
+interface IRadioIndication extends @1.3::IRadioIndication {
+    /**
+     * Report the current list of emergency numbers
+     *
+     * Each emergency number (@1.4::EmergencyNumber) in the emergency number list contains a
+     * dialing number, zero or more service category(s), mobile country code, and source(s) that
+     * indicate where it comes from.
+     *
+     * Radio must report all the valid emergency numbers with known mobile country code and
+     * emergency service categories from all available sources including network signaling, sim,
+     * modem/oem configuration, and default configuration (112 and 911 must be always available;
+     * additionally, 000, 08, 110, 999, 118 and 119 must be available when sim is not present).
+     * Radio shall not report emergency numbers that are invalid in the current locale. The
+     * reported emergency number list must not have duplicate @1.4::EmergencyNumber entries. Please
+     * refer the documentation of @1.4::EmergencyNumber to construct each emergency number to
+     * report.
+     *
+     * Radio must report the complete list of emergency numbers whenever the emergency numbers in
+     * the list are changed or whenever the client and the radio server are connected.
+     *
+     * Reference: 3gpp 22.101, Section 10 - Emergency Calls
+     *
+     * @param type Type of radio indication
+     * @param emergencyNumberList Current list of emergency numbers known to radio.
+     */
+    oneway currentEmergencyNumberList(RadioIndicationType type,
+            vec<EmergencyNumber> emergencyNumberList);
+
+    /**
+     * Request all of the current cell information known to the radio.
+     *
+     * @param type Type of radio indication
+     * @param records Current cell information
+     */
+    oneway cellInfoList_1_4(RadioIndicationType type, vec<CellInfo> records);
+
+    /**
+     * Incremental network scan results
+     */
+    oneway networkScanResult_1_4(RadioIndicationType type, NetworkScanResult result);
+
+    /**
+     * Indicates physical channel configurations.
+     *
+     * An empty configs list indicates that the radio is in idle mode.
+     *
+     * @param type Type of radio indication
+     * @param configs Vector of PhysicalChannelConfigs
+     */
+    oneway currentPhysicalChannelConfigs_1_4(RadioIndicationType type,
+            vec<PhysicalChannelConfig> configs);
+
+    /**
+     * Indicates data call contexts have changed.
+     *
+     * @param type Type of radio indication
+     * @param dcList Array of SetupDataCallResult identical to that returned by
+     *        IRadio.getDataCallList(). It is the complete list of current data contexts including
+     *        new contexts that have been activated. A data call is only removed from this list
+     *        when below conditions matched.
+     *        1. The framework sends a IRadio.deactivateDataCall().
+     *        2. The radio is powered off/on.
+     *        3. Unsolicited disconnect from either modem or network side.
+     */
+    oneway dataCallListChanged_1_4(RadioIndicationType type, vec<SetupDataCallResult> dcList);
+};
diff --git a/radio/1.4/IRadioResponse.hal b/radio/1.4/IRadioResponse.hal
new file mode 100644
index 0000000..df40969
--- /dev/null
+++ b/radio/1.4/IRadioResponse.hal
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.0::RadioResponseInfo;
+import @1.3::IRadioResponse;
+
+/**
+ * Interface declaring response functions to solicited radio requests.
+ */
+interface IRadioResponse extends @1.3::IRadioResponse {
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE (radio resetting)
+     *   RadioError:DIAL_MODIFIED_TO_USSD
+     *   RadioError:DIAL_MODIFIED_TO_SS
+     *   RadioError:DIAL_MODIFIED_TO_DIAL
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:NO_MEMORY
+     *   RadioError:NO_RESOURCES
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:FDN_CHECK_FAILURE
+     *   RadioError:MODEM_ERR
+     *   RadioError:NO_SUBSCRIPTION
+     *   RadioError:NO_NETWORK_FOUND
+     *   RadioError:INVALID_CALL_ID
+     *   RadioError:DEVICE_IN_USE
+     *   RadioError:ABORTED
+     *   RadioError:INVALID_MODEM_STATE
+     *   RadioError:CANCELLED
+     */
+    oneway emergencyDialResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param cellInfo List of current cell information known to radio
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     */
+    oneway getCellInfoListResponse_1_4(RadioResponseInfo info, vec<CellInfo> cellInfo);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param dataRegResponse Current Data registration response as defined by DataRegStateResult in
+     *        types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NOT_PROVISIONED
+     */
+    oneway getDataRegistrationStateResponse_1_4(RadioResponseInfo info,
+            DataRegStateResult dataRegResponse);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param cardStatus ICC card status as defined by CardStatus in types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NO_MEMORY
+     *   RadioError:NO_RESOURCES
+     *   RadioError:CANCELLED
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     */
+    oneway getIccCardStatusResponse_1_4(RadioResponseInfo info, CardStatus cardStatus);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param networkTypeBitmap a 32-bit bitmap of RadioAccessFamily.
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:NO_MEMORY
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:SYSTEM_ERR
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:MODEM_ERR
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:NO_RESOURCES
+     *   RadioError:CANCELLED
+     */
+    oneway getPreferredNetworkTypeBitmapResponse(RadioResponseInfo info,
+            bitfield<RadioAccessFamily> networkTypeBitmap);
+
+    /**
+     * Callback of IRadio.setPreferredNetworkTypeBitmap(int, bitfield<RadioAccessFamily>)
+     *
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:OPERATION_NOT_ALLOWED
+     *   RadioError:MODE_NOT_SUPPORTED
+     *   RadioError:NO_MEMORY
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:SYSTEM_ERR
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:MODEM_ERR
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:NO_RESOURCES
+     *   RadioError:CANCELLED
+     */
+    oneway setPreferredNetworkTypeBitmapResponse(RadioResponseInfo info);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param dcResponse List of DataCallResult as defined in types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NO_MEMORY
+     *   RadioError:NO_RESOURCES
+     *   RadioError:CANCELLED
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:SIM_ABSENT
+     */
+    oneway getDataCallListResponse_1_4(RadioResponseInfo info, vec<SetupDataCallResult> dcResponse);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param dcResponse SetupDataCallResult defined in types.hal
+     *
+     * Valid errors returned:
+     *   RadioError:NONE must be returned on both success and failure of setup with the
+     *              DataCallResponse.status containing the actual status
+     *              For all other errors the DataCallResponse is ignored.
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:OP_NOT_ALLOWED_BEFORE_REG_TO_NW
+     *   RadioError:OP_NOT_ALLOWED_DURING_VOICE_CALL
+     *   RadioError:REQUEST_NOT_SUPPORTED
+     *   RadioError:INVALID_ARGUMENTS
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:NO_MEMORY
+     *   RadioError:NO_RESOURCES
+     *   RadioError:CANCELLED
+     *   RadioError:SIM_ABSENT
+     */
+    oneway setupDataCallResponse_1_4(RadioResponseInfo info, SetupDataCallResult dcResponse);
+};
diff --git a/radio/1.4/types.hal b/radio/1.4/types.hal
new file mode 100644
index 0000000..d0eb0ac
--- /dev/null
+++ b/radio/1.4/types.hal
@@ -0,0 +1,1702 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.4;
+
+import @1.0::ApnAuthType;
+import @1.0::ApnTypes;
+import @1.0::CellInfoType;
+import @1.0::DataCallFailCause;
+import @1.0::DataProfileId;
+import @1.0::DataProfileInfoType;
+import @1.0::RadioAccessFamily;
+import @1.0::RadioCapabilityPhase;
+import @1.0::RadioCapabilityStatus ;
+import @1.0::RadioError;
+import @1.0::RadioTechnology;
+import @1.0::RegState;
+import @1.0::TimeStampType;
+import @1.1::ScanStatus;
+import @1.2::AccessNetwork;
+import @1.2::CellInfo;
+import @1.2::CellInfoCdma;
+import @1.2::CellInfoGsm;
+import @1.2::CellInfoLte;
+import @1.2::CellInfoTdscdma;
+import @1.2::CellInfoWcdma;
+import @1.2::CardStatus;
+import @1.2::CellIdentity;
+import @1.2::DataRegStateResult;
+import @1.2::PhysicalChannelConfig;
+
+import android.hidl.safe_union@1.0::Monostate;
+
+enum AccessNetwork : @1.2::AccessNetwork {
+    /**
+     * Unknown access network
+     */
+    UNKNOWN = 0,
+};
+
+/**
+ * Emergency number contains information of number, one or more service category(s), mobile country
+ * code (mcc), and source(s) that indicate where it comes from.
+ *
+ * If the source of the emergency number is associated with country, field ‘mcc’ must be provided;
+ * otherwise the field ‘mcc’ must be an empty string.
+ *
+ * If the source of the emergency number is associated with network operator, field ‘mcc’ and
+ * 'mnc' must be provided; otherwise the field ‘mnc’ must be an empty string.
+ *
+ * A unique EmergencyNumber has a unique combination of ‘number’, ‘mcc’, 'mnc' and 'categories'
+ * fields. Multiple @1.4::EmergencyNumberSource should be merged into the bitfield for the same
+ * EmergencyNumber.
+ *
+ * Reference: 3GPP TS 22.101 version 9.1.0 Release 9
+ */
+struct EmergencyNumber{
+    /**
+     * The emergency number. The character in the number string should only be the dial pad
+     * character('0'-'9', '*', or '#'). For example: 911.
+     */
+    string number;
+    /**
+     * 3-digit Mobile Country Code, 0..999. Empty string if not applicable.
+     */
+    string mcc;
+    /**
+     * 2 or 3-digit Mobile Network Code, 0..999. Empty string if not applicable.
+     */
+    string mnc;
+    /**
+     * The bitfield of @1.4::EmergencyServiceCategory(s). See @1.4::EmergencyServiceCategory for
+     * the value of each bit.
+     */
+    bitfield<EmergencyServiceCategory> categories;
+    /**
+     * The bitfield of @1.4::EmergencyNumberSource(s). See @1.4::EmergencyNumberSource for the
+     * value of each bit.
+     */
+    bitfield<EmergencyNumberSource> sources;
+};
+
+/**
+ * Defining Emergency Service Category as follows:
+ * - General emergency call, all categories;
+ * - Police;
+ * - Ambulance;
+ * - Fire Brigade;
+ * - Marine Guard;
+ * - Mountain Rescue;
+ * - Manually Initiated eCall (MIeC);
+ * - Automatically Initiated eCall (AIeC);
+ *
+ * Category UNSPECIFIED (General emergency call, all categories) indicates that no specific
+ * services are associated with this emergency number.
+ *
+ * Reference: 3gpp 22.101, Section 10 - Emergency Calls
+ */
+enum EmergencyServiceCategory : int32_t {
+    /**
+     * General emergency call, all categories
+     */
+    UNSPECIFIED = 0,
+    POLICE = 1 << 0,
+    AMBULANCE = 1 << 1,
+    FIRE_BRIGADE = 1 << 2,
+    MARINE_GUARD = 1 << 3,
+    MOUNTAIN_RESCUE = 1 << 4,
+    /**
+     * Manually Initiated eCall (MIeC)
+     */
+    MIEC = 1 << 5,
+    /**
+     * Automatically Initiated eCall (AIeC)
+     */
+    AIEC = 1 << 6,
+};
+
+/**
+ * The source to tell where the corresponding @1.4::EmergencyNumber comes from.
+ *
+ * Reference: 3gpp 22.101, Section 10 - Emergency Calls
+ */
+enum EmergencyNumberSource : int32_t {
+    /**
+     * Indicates the number is from the network signal.
+     */
+    NETWORK_SIGNALING = 1 << 0,
+    /**
+     * Indicates the number is from the sim card.
+     */
+    SIM = 1 << 1,
+    /**
+     * Indicates the number is from the modem config.
+     */
+    MODEM_CONFIG = 1 << 2,
+    /**
+     * Indicates the number is available as default. Per the reference, 112, 911 must always be
+     * available; additionally, 000, 08, 110, 999, 118 and 119 must be available when sim is not
+     * present.
+     */
+    DEFAULT = 1 << 3,
+};
+
+enum RadioTechnology : @1.0::RadioTechnology {
+    /** 5G NR. */
+    NR = 20,
+};
+
+enum RadioAccessFamily : @1.0::RadioAccessFamily {
+    /** 5G NR. */
+    NR = 1 << RadioTechnology:NR,
+};
+
+/** Mapping the frequency to a rough range. */
+enum FrequencyRange : int32_t {
+    /** Indicates the frequency range is below 1GHz. */
+    LOW = 1,
+
+    /** Indicates the frequency range is between 1GHz and 3GHz. */
+    MID = 2,
+
+    /** Indicates the frequency range is between 3GHz and 6GHz. */
+    HIGH = 3,
+
+    /** Indicates the frequency range is above 6GHz (millimeter wave frequency). */
+    MMWAVE = 4,
+};
+
+/**
+ * Expose more setup data call failures.
+ */
+enum DataCallFailCause : @1.0::DataCallFailCause {
+    /**
+     * Network cannot provide the requested service and PDP context is deactivated because of LLC
+     * or SNDCP failure.
+     */
+    LLC_SNDCP = 0x19,
+    /**
+     * UE requested to modify QoS parameters or the bearer control mode, which is not compatible
+     * with the selected bearer control mode.
+     */
+    ACTIVATION_REJECTED_BCM_VIOLATION = 0x30,
+    /**
+     * Network has already initiated the activation, modification, or deactivation of bearer
+     * resources that was requested by the UE.
+     */
+    COLLISION_WITH_NW_INIT_REQ = 0x38,
+    /**
+     * Network supports IPv4v6 PDP type only. Non-IP type is not allowed. In LTE mode of operation,
+     * this is a PDN throttling cause code, meaning the UE may throttle further requests to the
+     * same APN.
+     */
+    ONLY_IPV4V6_ALLOWED = 0x39,
+    /**
+     * Network supports non-IP PDP type only. IPv4, IPv6 and IPv4v6 is not allowed. In LTE mode of
+     * operation, this is a PDN throttling cause code, meaning the UE can throttle further requests
+     * to the same APN.
+     */
+    ONLY_NON_IP_ALLOWED = 0x3A,
+    /**
+     * QCI indicated in the UE request cannot be supported.
+     */
+    UNSUPPORTED_QCI_VALUE = 0x3B,
+    /**
+     * Procedure requested by the UE was rejected because the bearer handling is not supported.
+     */
+    BEARER_HANDLING_NOT_SUPPORTED = 0x3C,
+    /**
+     * Not receiving a DNS address that was mandatory.
+     */
+    INVALID_DNS_ADDR = 0x7B,
+    /**
+     * Not receiving either a PCSCF or a DNS address, one of them being mandatory.
+     */
+    INVALID_PCSCF_DNS_ADDR = 0x7C,
+    /**
+     * Emergency call bring up on a different ePDG.
+     */
+    CALL_PREEMPT_BY_EMERGENCY_APN = 0x7F,
+    /**
+     * UE performs a detach or disconnect PDN action based on TE requirements.
+     */
+    UE_INIT_DETACH_OR_DISCONNECT = 0x80,
+
+    /**
+     * Reason unspecified for foreign agent rejected MIP registration.
+     */
+    MIP_FA_REASON_UNSPECIFIED = 0x7D0,
+    /**
+     * Foreign agent administratively prohibited MIP registration.
+     */
+    MIP_FA_ADMIN_PROHIBITED = 0x7D1,
+    /**
+     * Foreign agent rejected MIP registration because of insufficient resources.
+     */
+    MIP_FA_INSUFFICIENT_RESOURCES = 0x7D2,
+    /**
+     * Foreign agent rejected MIP registration because of MN-AAA authenticator was wrong.
+     */
+    MIP_FA_MOBILE_NODE_AUTH_FAILURE = 0x7D3,
+    /**
+     * Foreign agent rejected MIP registration because of home agent authentication failure.
+     */
+    MIP_FA_HA_AUTH_FAILURE = 0x7D4,
+    /**
+     * Foreign agent rejected MIP registration because of requested lifetime was too long.
+     */
+    MIP_FA_REQ_LIFETIME_TOO_LONG = 0x7D5,
+    /**
+     * Foreign agent rejected MIP registration because of malformed request.
+     */
+    MIP_FA_MALFORMED_REQUEST = 0x7D6,
+    /**
+     * Foreign agent rejected MIP registration because of malformed reply.
+     */
+    MIP_FA_MALFORMED_REPLY = 0x7D7,
+    /**
+     * Foreign agent rejected MIP registration because of requested encapsulation was unavailable.
+     */
+    MIP_FA_ENCAPSULATION_UNAVAILABLE = 0x7D8,
+    /**
+     * Foreign agent rejected MIP registration of VJ Header Compression was unavailable.
+     */
+    MIP_FA_VJHC_UNAVAILABLE = 0x7D9,
+    /**
+     * Foreign agent rejected MIP registration because of reverse tunnel was unavailable.
+     */
+    MIP_FA_REV_TUNNEL_UNAVAILABLE = 0x7DA,
+    /**
+     * Foreign agent rejected MIP registration because of reverse tunnel was mandatory but not
+     * requested by device.
+     */
+    MIP_FA_REV_TUNNEL_IS_MAND_AND_T_BIT_NOT_SET = 0x7DB,
+    /**
+     * Foreign agent rejected MIP registration because of delivery style was not supported.
+     */
+    MIP_FA_DELIVERY_STYLE_NOT_SUPP = 0x7DC,
+    /**
+     * Foreign agent rejected MIP registration because of missing NAI.
+     */
+    MIP_FA_MISSING_NAI = 0x7DD,
+    /**
+     * Foreign agent rejected MIP registration because of missing Home Agent.
+     */
+    MIP_FA_MISSING_HA = 0x7DE,
+    /**
+     * Foreign agent rejected MIP registration because of missing Home Address.
+     */
+    MIP_FA_MISSING_HOME_ADDR = 0x7DF,
+    /**
+     * Foreign agent rejected MIP registration because of unknown challenge.
+     */
+    MIP_FA_UNKNOWN_CHALLENGE = 0x7E0,
+    /**
+     * Foreign agent rejected MIP registration because of missing challenge.
+     */
+    MIP_FA_MISSING_CHALLENGE = 0x7E1,
+    /**
+     * Foreign agent rejected MIP registration because of stale challenge.
+     */
+    MIP_FA_STALE_CHALLENGE = 0x7E2,
+    /**
+     * Reason unspecified for home agent rejected MIP registration.
+     */
+    MIP_HA_REASON_UNSPECIFIED = 0x7E3,
+    /**
+     * Home agent administratively prohibited MIP registration.
+     */
+    MIP_HA_ADMIN_PROHIBITED = 0x7E4,
+    /**
+     * Home agent rejected MIP registration because of insufficient resources.
+     */
+    MIP_HA_INSUFFICIENT_RESOURCES = 0x7E5,
+    /**
+     * Home agent rejected MIP registration because of MN-HA authenticator was wrong.
+     */
+    MIP_HA_MOBILE_NODE_AUTH_FAILURE = 0x7E6,
+    /**
+     * Home agent rejected MIP registration because of foreign agent authentication failure.
+     */
+    MIP_HA_FA_AUTH_FAILURE = 0x7E7,
+    /**
+     * Home agent rejected MIP registration because of registration id mismatch.
+     */
+    MIP_HA_REGISTRATION_ID_MISMATCH = 0x7E8,
+    /**
+     * Home agent rejected MIP registration because of malformed request.
+     */
+    MIP_HA_MALFORMED_REQUEST = 0x7E9,
+    /**
+     * Home agent rejected MIP registration because of unknown home agent address.
+     */
+    MIP_HA_UNKNOWN_HA_ADDR = 0x7EA,
+    /**
+     * Home agent rejected MIP registration because of reverse tunnel was unavailable.
+     */
+    MIP_HA_REV_TUNNEL_UNAVAILABLE = 0x7EB,
+    /**
+     * Home agent rejected MIP registration because of reverse tunnel is mandatory but not
+     * requested by device.
+     */
+    MIP_HA_REV_TUNNEL_IS_MANDATORY_AND_T_BIT_NOT_SET = 0x7EC,
+    /**
+     * Home agent rejected MIP registration because of encapsulation unavailable.
+     */
+    MIP_HA_ENCAPSULATION_UNAVAILABLE = 0x7ED,
+    /**
+     * Tearing down is in progress.
+     */
+    CLOSE_IN_PROGRESS = 0x7EE,
+    /**
+     * Brought down by the network.
+     */
+    NW_INITIATED_TERMINATION = 0x7EF,
+    /**
+     * Another application in modem preempts the data call.
+     */
+    MODEM_APP_PREEMPTED = 0x7F0,
+    /**
+     * V4 PDN is in throttled state due to network providing only V6 address during the previous
+     * VSNCP bringup (subs_limited_to_v6).
+     */
+    ERR_PDN_IPV4_CALL_DISALLOWED = 0x7F1,
+    /**
+     * V4 PDN is in throttled state due to previous VSNCP bringup failure(s).
+     */
+    ERR_PDN_IPV4_CALL_THROTTLED = 0x7F2,
+    /**
+     * V6 PDN is in throttled state due to network providing only V4 address during the previous
+     * VSNCP bringup (subs_limited_to_v4).
+     */
+    ERR_PDN_IPV6_CALL_DISALLOWED = 0x7F3,
+    /**
+     * V6 PDN is in throttled state due to previous VSNCP bringup failure(s).
+     */
+    ERR_PDN_IPV6_CALL_THROTTLED = 0x7F4,
+    /**
+     * Modem restart.
+     */
+    MODEM_RESTART = 0x7F5,
+    /**
+     * PDP PPP calls are not supported.
+     */
+    PDP_PPP_NOT_SUPPORTED = 0x7F6,
+    /**
+     * RAT on which the data call is attempted/connected is no longer the preferred RAT.
+     */
+    UNPREFERRED_RAT = 0x7F7,
+    /**
+     * Physical link is in the process of cleanup.
+     */
+    PHYS_LINK_CLOSE_IN_PROGRESS = 0x7F8,
+    /**
+     * Interface bring up is attempted for an APN that is yet to be handed over to target RAT.
+     */
+    APN_PENDING_HANDOVER = 0x7F9,
+    /**
+     * APN bearer type in the profile does not match preferred network mode.
+     */
+    PROFILE_BEARER_INCOMPATIBLE = 0x7FA,
+    /**
+     * Card was refreshed or removed.
+     */
+    SIM_CARD_EVT = 0x7FB,
+    /**
+     * Device is going into lower power mode or powering down.
+     */
+    LPM_OR_PWR_DOWN = 0x7FC,
+    /**
+     * APN has been disabled.
+     */
+    APN_DISABLED = 0x7FD,
+    /**
+     * Maximum PPP inactivity timer expired.
+     */
+    MAX_PPP_INACTIVITY_TIMER_EXPIRED = 0x7FE,
+    /**
+     * IPv6 address transfer failed.
+     */
+    IPV6_ADDR_TRANSFER_FAILED = 0x7FF,
+    /**
+     * Target RAT swap failed.
+     */
+    TRAT_SWAP_FAILED = 0x800,
+    /**
+     * Device falls back from eHRPD to HRPD.
+     */
+    EHRPD_TO_HRPD_FALLBACK = 0x801,
+    /**
+     * UE is in MIP-only configuration but the MIP configuration fails on call bring up due to
+     * incorrect provisioning.
+     */
+    MIP_CONFIG_FAILURE = 0x802,
+    /**
+     * PDN inactivity timer expired due to no data transmission in a configurable duration of time.
+     */
+    PDN_INACTIVITY_TIMER_EXPIRED = 0x803,
+    /**
+     * IPv4 data call bring up is rejected because the UE already maintains the allotted maximum
+     * number of IPv4 data connections.
+     */
+    MAX_V4_CONNECTIONS = 0x804,
+    /**
+     * IPv6 data call bring up is rejected because the UE already maintains the allotted maximum
+     * number of IPv6 data connections.
+     */
+    MAX_V6_CONNECTIONS = 0x805,
+    /**
+     * New PDN bring up is rejected during interface selection because the UE has already allotted
+     * the available interfaces for other PDNs.
+     */
+    APN_MISMATCH = 0x806,
+    /**
+     * New call bring up is rejected since the existing data call IP type doesn't match the
+     * requested IP.
+     */
+    IP_VERSION_MISMATCH = 0x807,
+    /**
+     * Dial up networking (DUN) call bring up is rejected since UE is in eHRPD RAT.
+     */
+    DUN_CALL_DISALLOWED = 0x808,
+    /**
+     * Rejected/Brought down since UE is transition between EPC and NONEPC RAT.
+     */
+    INTERNAL_EPC_NONEPC_TRANSITION = 0x809,
+    /**
+     * The current interface is being in use.
+     */
+    IFACE_IN_USE = 0x80A,
+    /**
+     * PDN connection to the APN is disallowed on the roaming network.
+     */
+    APN_DISALLOWED_ON_ROAMING = 0x80C,
+    /**
+     * APN-related parameters are changed.
+     */
+    APN_PARAM_CHANGED = 0x80D,
+    /**
+     * PDN is attempted to be brought up with NULL APN but NULL APN is not supported.
+     */
+    NULL_APN_DISALLOWED = 0x80E,
+    /**
+     * Thermal level increases and causes calls to be torn down when normal mode of operation is
+     * not allowed.
+     */
+    THERMAL_MITIGATION = 0x80F,
+    /**
+     * PDN Connection to a given APN is disallowed because data is disabled from the device user
+     * interface settings.
+     */
+    DATA_SETTINGS_DISABLED = 0x810,
+    /**
+     * PDN Connection to a given APN is disallowed because data roaming is disabled from the device
+     * user interface settings and the UE is roaming.
+     */
+    DATA_ROAMING_SETTINGS_DISABLED = 0x811,
+    /**
+     * Default data subscription switch occurs.
+     */
+    DDS_CALL_ABORT = 0x812,
+    /**
+     * PDN being brought up with an APN that is part of forbidden APN Name list.
+     */
+    INVALID_APN_NAME = 0x813,
+    /**
+     * Default data subscription switch is in progress.
+     */
+    DDS_SWITCH_IN_PROGRESS = 0x814,
+    /**
+     * Roaming is disallowed during call bring up.
+     */
+    CALL_DISALLOWED_IN_ROAMING = 0x815,
+    /**
+     * UE is unable to bring up a non-IP data call because the device is not camped on a NB1 cell.
+     */
+    NON_IP_NOT_SUPPORTED = 0x816,
+    /**
+     * Non-IP PDN is in throttled state due to previous VSNCP bringup failure(s).
+     */
+    ERR_PDN_NON_IP_CALL_THROTTLED = 0x817,
+    /**
+     * Non-IP PDN is in disallowed state due to the network providing only an IP address.
+     */
+    ERR_PDN_NON_IP_CALL_DISALLOWED = 0x818,
+    /**
+     * Device in CDMA locked state.
+     */
+    CDMA_LOCK = 0x819,
+    /**
+     * Received an intercept order from the base station.
+     */
+    CDMA_INTERCEPT = 0x81A,
+    /**
+     * Receiving a reorder from the base station.
+     */
+    CDMA_REORDER = 0x81B,
+    /**
+     * Receiving a release from the base station with a SO Reject reason.
+     */
+    CDMA_REL_SO_REJ = 0x81C,
+    /**
+     * Receiving an incoming call from the base station.
+     */
+    CDMA_INCOM_CALL = 0x81D,
+    /**
+     * RL/FL fade or receiving a call release from the base station.
+     */
+    CDMA_ALERT_STOP = 0x81E,
+    /**
+     * Channel acquisition failures. This indicates that device has failed acquiring all the
+     * channels in the PRL.
+     */
+    CHANNEL_ACQUISITION_FAILURE = 0x81F,
+    /**
+     * Maximum access probes transmitted.
+     */
+    MAX_ACCESS_PROBE = 0x820,
+    /**
+     * Concurrent service is not supported by base station.
+     */
+    CCS_NOT_SUPPORTED_BY_BS = 0x821,
+    /**
+     * There was no response received from the base station.
+     */
+    NO_RESPONSE_FROM_BS = 0x822,
+    /**
+     * The base station rejecting the call.
+     */
+    REJECTED_BY_BS = 0x823,
+    /**
+     * The concurrent services requested were not compatible.
+     */
+    CCS_INCOMPATIBLE = 0x824,
+    /**
+     * Device does not have CDMA service.
+     */
+    NO_CDMA_SRV = 0x825,
+    /**
+     * RUIM not being present.
+     */
+    UIM_NOT_PRESENT = 0x826,
+    /**
+     * Receiving a retry order from the base station.
+     */
+    CDMA_RETRY_ORDER = 0x827,
+    /**
+     * Access blocked by the base station.
+     */
+    ACCESS_BLOCK = 0x828,
+    /**
+     * Access blocked by the base station for all mobile devices.
+     */
+    ACCESS_BLOCK_ALL = 0x829,
+    /**
+     * Maximum access probes for the IS-707B call.
+     */
+    IS707B_MAX_ACC = 0x82A,
+    /**
+     * Put device in thermal emergency.
+     */
+    THERMAL_EMERGENCY = 0x82B,
+    /**
+     * In favor of a voice call or SMS when concurrent voice and data are not supported.
+     */
+    CCS_NOT_ALLOWED = 0x82C,
+    /**
+     * The other clients rejected incoming call.
+     */
+    INCOM_REJ = 0x82D,
+    /**
+     * No service on the gateway.
+     */
+    NO_GATEWAY_SRV = 0x82E,
+    /**
+     * GPRS context is not available.
+     */
+    NO_GPRS_CONTEXT = 0x82F,
+    /**
+     * Network refuses service to the MS because either an identity of the MS is not acceptable to
+     * the network or the MS does not pass the authentication check.
+     */
+    ILLEGAL_MS = 0x830,
+    /**
+     * ME could not be authenticated and the ME used is not acceptable to the network.
+     */
+    ILLEGAL_ME = 0x831,
+    /**
+     * Not allowed to operate either GPRS or non-GPRS services.
+     */
+    GPRS_SERVICES_AND_NON_GPRS_SERVICES_NOT_ALLOWED = 0x832,
+    /**
+     * MS is not allowed to operate GPRS services.
+     */
+    GPRS_SERVICES_NOT_ALLOWED = 0x833,
+    /**
+     * No matching identity or context could be found in the network.
+     */
+    MS_IDENTITY_CANNOT_BE_DERIVED_BY_THE_NETWORK = 0x834,
+    /**
+     * Mobile reachable timer has expired, or the GMM context data related to the subscription dose
+     * not exist in the SGSN.
+     */
+    IMPLICITLY_DETACHED = 0x835,
+    /**
+     * UE requests GPRS service, or the network initiates a detach request in a PLMN which does not
+     * offer roaming for GPRS services to that MS.
+     */
+    PLMN_NOT_ALLOWED = 0x836,
+    /**
+     * MS requests service, or the network initiates a detach request, in a location area where the
+     * HPLMN determines that the MS, by subscription, is not allowed to operate.
+     */
+    LA_NOT_ALLOWED = 0x837,
+    /**
+     * UE requests GPRS service or the network initiates a detach request in a PLMN that does not
+     * offer roaming for GPRS services.
+     */
+    GPRS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN = 0x838,
+    /**
+     * PDP context already exists.
+     */
+    PDP_DUPLICATE = 0x839,
+    /**
+     * RAT change on the UE.
+     */
+    UE_RAT_CHANGE = 0x83A,
+    /**
+     * Network cannot serve a request from the MS due to congestion.
+     */
+    CONGESTION = 0x83B,
+    /**
+     * MS requests an establishment of the radio access bearers for all active PDP contexts by
+     * sending a service request message indicating data to the network, but the SGSN does not have
+     * any active PDP context.
+     */
+    NO_PDP_CONTEXT_ACTIVATED = 0x83C,
+    /**
+     * Access class blocking restrictions for the current camped cell.
+     */
+    ACCESS_CLASS_DSAC_REJECTION = 0x83D,
+    /**
+     * SM attempts PDP activation for a maximum of four attempts.
+     */
+    PDP_ACTIVATE_MAX_RETRY_FAILED = 0x83E,
+    /**
+     * Radio access bearer failure.
+     */
+    RAB_FAILURE = 0x83F,
+    /**
+     * Invalid EPS bearer identity in the request.
+     */
+    ESM_UNKNOWN_EPS_BEARER_CONTEXT = 0x840,
+    /**
+     * Data radio bearer is released by the RRC.
+     */
+    DRB_RELEASED_AT_RRC = 0x841,
+    /**
+     * Indicate the connection was released.
+     */
+    NAS_SIG_CONN_RELEASED = 0x842,
+    /**
+     * UE is detached.
+     */
+    EMM_DETACHED = 0x843,
+    /**
+     * Attach procedure is rejected by the network.
+     */
+    EMM_ATTACH_FAILED = 0x844,
+    /**
+     * Attach procedure is started for EMC purposes.
+     */
+    EMM_ATTACH_STARTED = 0x845,
+    /**
+     * Service request procedure failure.
+     */
+    LTE_NAS_SERVICE_REQ_FAILED = 0x846,
+    /**
+     * Active dedication bearer was requested using the same default bearer ID.
+     */
+    ESM_ACTIVE_DEDICATED_BEARER_REACTIVATED_BY_NW = 0x847,
+    /**
+     * Collision scenarios for the UE and network-initiated procedures.
+     */
+    ESM_LOWER_LAYER_FAILURE = 0x848,
+    /**
+     * Bearer must be deactivated to synchronize with the network.
+     */
+    ESM_SYNC_UP_WITH_NW = 0x849,
+    /**
+     * Active dedication bearer was requested for an existing default bearer.
+     */
+    ESM_NW_ACTIVATED_DED_BEARER_WITH_ID_OF_DEF_BEARER = 0x84A,
+    /**
+     * Bad OTA message is received from the network.
+     */
+    ESM_BAD_OTA_MESSAGE = 0x84B,
+    /**
+     * Download server rejected the call.
+     */
+    ESM_DS_REJECTED_THE_CALL = 0x84C,
+    /**
+     * PDN was disconnected by the downlaod server due to IRAT.
+     */
+    ESM_CONTEXT_TRANSFERED_DUE_TO_IRAT = 0x84D,
+    /**
+     * Dedicated bearer will be deactivated regardless of the network response.
+     */
+    DS_EXPLICIT_DEACT = 0x84E,
+    /**
+     * No specific local cause is mentioned, usually a valid OTA cause.
+     */
+    ESM_LOCAL_CAUSE_NONE = 0x84F,
+    /**
+     * Throttling is not needed for this service request failure.
+     */
+    LTE_NAS_SERVICE_REQ_FAILED_NO_THROTTLE = 0x850,
+    /**
+     * Access control list check failure at the lower layer.
+     */
+    ACCESS_CONTROL_LIST_CHECK_FAILURE = 0x851,
+    /**
+     * Service is not allowed on the requested PLMN.
+     */
+    LTE_NAS_SERVICE_REQ_FAILED_DS_DISALLOW = 0x852,
+    /**
+     * T3417 timer expiration of the service request procedure.
+     */
+    EMM_T3417_EXPIRED = 0x853,
+    /**
+     * Extended service request fails due to expiration of the T3417 EXT timer.
+     */
+    EMM_T3417_EXT_EXPIRED = 0x854,
+    /**
+     * Transmission failure of uplink data.
+     */
+    LRRC_UL_DATA_CNF_FAILURE_TXN = 0x855,
+    /**
+     * Uplink data delivery failed due to a handover.
+     */
+    LRRC_UL_DATA_CNF_FAILURE_HO = 0x856,
+    /**
+     * Uplink data delivery failed due to a connection release.
+     */
+    LRRC_UL_DATA_CNF_FAILURE_CONN_REL = 0x857,
+    /**
+     * Uplink data delivery failed due to a radio link failure.
+     */
+    LRRC_UL_DATA_CNF_FAILURE_RLF = 0x858,
+    /**
+     * RRC is not connected but the NAS sends an uplink data request.
+     */
+    LRRC_UL_DATA_CNF_FAILURE_CTRL_NOT_CONN = 0x859,
+    /**
+     * Connection failure at access stratum.
+     */
+    LRRC_CONN_EST_FAILURE = 0x85A,
+    /**
+     * Connection establishment is aborted due to another procedure.
+     */
+    LRRC_CONN_EST_FAILURE_ABORTED = 0x85B,
+    /**
+     * Connection establishment failed due to a lower layer RRC connection failure.
+     */
+    LRRC_CONN_EST_FAILURE_ACCESS_BARRED = 0x85C,
+    /**
+     * Connection establishment failed due to cell reselection at access stratum.
+     */
+    LRRC_CONN_EST_FAILURE_CELL_RESEL = 0x85D,
+    /**
+     * Connection establishment failed due to configuration failure at the RRC.
+     */
+    LRRC_CONN_EST_FAILURE_CONFIG_FAILURE = 0x85E,
+    /**
+     * Connection could not be established in the time limit.
+     */
+    LRRC_CONN_EST_FAILURE_TIMER_EXPIRED = 0x85F,
+    /**
+     * Connection establishment failed due to a link failure at the RRC.
+     */
+    LRRC_CONN_EST_FAILURE_LINK_FAILURE = 0x860,
+    /**
+     * Connection establishment failed as the RRC is not camped on any cell.
+     */
+    LRRC_CONN_EST_FAILURE_NOT_CAMPED = 0x861,
+    /**
+     * Connection establishment failed due to a service interval failure at the RRC.
+     */
+    LRRC_CONN_EST_FAILURE_SI_FAILURE = 0x862,
+    /**
+     * Connection establishment failed due to the network rejecting the UE connection request.
+     */
+    LRRC_CONN_EST_FAILURE_CONN_REJECT = 0x863,
+    /**
+     * Normal connection release.
+     */
+    LRRC_CONN_REL_NORMAL = 0x864,
+    /**
+     * Connection release failed due to radio link failure conditions.
+     */
+    LRRC_CONN_REL_RLF = 0x865,
+    /**
+     * Connection reestablishment failure.
+     */
+    LRRC_CONN_REL_CRE_FAILURE = 0x866,
+    /**
+     * UE is out of service during the call register.
+     */
+    LRRC_CONN_REL_OOS_DURING_CRE = 0x867,
+    /**
+     * Connection has been released by the RRC due to an abort request.
+     */
+    LRRC_CONN_REL_ABORTED = 0x868,
+    /**
+     * Connection released due to a system information block read error.
+     */
+    LRRC_CONN_REL_SIB_READ_ERROR = 0x869,
+    /**
+     * Network-initiated detach with reattach.
+     */
+    DETACH_WITH_REATTACH_LTE_NW_DETACH = 0x86A,
+    /**
+     * Network-initiated detach without reattach.
+     */
+    DETACH_WITHOUT_REATTACH_LTE_NW_DETACH = 0x86B,
+    /**
+     * ESM procedure maximum attempt timeout failure.
+     */
+    ESM_PROC_TIME_OUT = 0x86C,
+    /**
+     * No PDP exists with the given connection ID while modifying or deactivating or activation for
+     * an already active PDP.
+     */
+    INVALID_CONNECTION_ID = 0x86D,
+    /**
+     * Maximum NSAPIs have been exceeded during PDP activation.
+     */
+    INVALID_NSAPI = 0x86E,
+    /**
+     * Primary context for NSAPI does not exist.
+     */
+    INVALID_PRI_NSAPI = 0x86F,
+    /**
+     * Unable to encode the OTA message for MT PDP or deactivate PDP.
+     */
+    INVALID_FIELD = 0x870,
+    /**
+     * Radio access bearer is not established by the lower layers during activation, modification,
+     * or deactivation.
+     */
+    RAB_SETUP_FAILURE = 0x871,
+    /**
+     * Expiration of the PDP establish timer with a maximum of five retries.
+     */
+    PDP_ESTABLISH_MAX_TIMEOUT = 0x872,
+    /**
+     * Expiration of the PDP modify timer with a maximum of four retries.
+     */
+    PDP_MODIFY_MAX_TIMEOUT = 0x873,
+    /**
+     * Expiration of the PDP deactivate timer with a maximum of four retries.
+     */
+    PDP_INACTIVE_MAX_TIMEOUT = 0x874,
+    /**
+     * PDP activation failed due to RRC_ABORT or a forbidden PLMN.
+     */
+    PDP_LOWERLAYER_ERROR = 0x875,
+    /**
+     * MO PDP modify collision when the MT PDP is already in progress.
+     */
+    PDP_MODIFY_COLLISION = 0x876,
+    /**
+     * Radio resource is not available.
+     */
+    SM_NO_RADIO_AVAILABLE = 0x877,
+    /**
+     * Abort due to service not available.
+     */
+    SM_ABORT_SERVICE_NOT_AVAILABLE = 0x878,
+    /**
+     * Maximum size of the L2 message was exceeded.
+     */
+    MESSAGE_EXCEED_MAX_L2_LIMIT = 0x879,
+    /**
+     * NAS request was rejected by the network.
+     */
+    SM_NAS_SRV_REQ_FAILURE = 0x87A,
+    /**
+     * RRC connection establishment failure due to an error in the request message.
+     */
+    RRC_CONN_EST_FAILURE_REQ_ERROR = 0x87B,
+    /**
+     * RRC connection establishment failure due to a change in the tracking area ID.
+     */
+    RRC_CONN_EST_FAILURE_TAI_CHANGE = 0x87C,
+    /**
+     * RRC connection establishment failure because the RF was unavailable.
+     */
+    RRC_CONN_EST_FAILURE_RF_UNAVAILABLE = 0x87D,
+    /**
+     * Connection was aborted before deactivating the LTE stack due to a successful LX IRAT.
+     * (e.g., after IRAT handovers)
+     */
+    RRC_CONN_REL_ABORTED_IRAT_SUCCESS = 0x87E,
+    /**
+     * If the UE has an LTE radio link failure before security is established, the connection must
+     * be released and the UE must return to idle.
+     */
+    RRC_CONN_REL_RLF_SEC_NOT_ACTIVE = 0x87F,
+    /**
+     * Connection was aborted by the NAS after an IRAT to LTE IRAT handover.
+     */
+    RRC_CONN_REL_IRAT_TO_LTE_ABORTED = 0x880,
+    /**
+     * Connection was aborted before deactivating the LTE stack after a successful LR IRAT cell
+     * change order procedure.
+     */
+    RRC_CONN_REL_IRAT_FROM_LTE_TO_G_CCO_SUCCESS = 0x881,
+    /**
+     * Connection was aborted in the middle of a LG IRAT cell change order.
+     */
+    RRC_CONN_REL_IRAT_FROM_LTE_TO_G_CCO_ABORTED = 0x882,
+    /**
+     * IMSI present in the UE is unknown in the home subscriber server.
+     */
+    IMSI_UNKNOWN_IN_HSS = 0x883,
+    /**
+     * IMEI of the UE is not accepted by the network.
+     */
+    IMEI_NOT_ACCEPTED = 0x884,
+    /**
+     * EPS and non-EPS services are not allowed by the network.
+     */
+    EPS_SERVICES_AND_NON_EPS_SERVICES_NOT_ALLOWED = 0x885,
+    /**
+     * EPS services are not allowed in the PLMN.
+     */
+    EPS_SERVICES_NOT_ALLOWED_IN_PLMN = 0x886,
+    /**
+     * Mobile switching center is temporarily unreachable.
+     */
+    MSC_TEMPORARILY_NOT_REACHABLE = 0x887,
+    /**
+     * CS domain is not available.
+     */
+    CS_DOMAIN_NOT_AVAILABLE = 0x888,
+    /**
+     * ESM level failure.
+     */
+    ESM_FAILURE = 0x889,
+    /**
+     * MAC level failure.
+     */
+    MAC_FAILURE = 0x88A,
+    /**
+     * Synchronization failure.
+     */
+    SYNCH_FAILURE = 0x88B,
+    /**
+     * UE security capabilities mismatch.
+     */
+    UE_SECURITY_CAPABILITIES_MISMATCH = 0x88C,
+    /**
+     * Unspecified security mode reject.
+     */
+    SECURITY_MODE_REJ_UNSPECIFIED = 0x88D,
+    /**
+     * Unacceptable non-EPS authentication.
+     */
+    NON_EPS_AUTH_UNACCEPTABLE = 0x88E,
+    /**
+     * CS fallback call establishment is not allowed.
+     */
+    CS_FALLBACK_CALL_EST_NOT_ALLOWED = 0x88F,
+    /**
+     * No EPS bearer context was activated.
+     */
+    NO_EPS_BEARER_CONTEXT_ACTIVATED = 0x890,
+    /**
+     * Invalid EMM state.
+     */
+    EMM_INVALID_STATE = 0x891,
+    /**
+     * Non-Access Spectrum layer failure.
+     */
+    NAS_LAYER_FAILURE = 0x892,
+    /**
+     * Multiple PDP call feature is disabled.
+     */
+    MULTI_PDN_NOT_ALLOWED = 0x893,
+    /**
+     * Data call has been brought down because EMBMS is not enabled at the RRC layer.
+     */
+    EMBMS_NOT_ENABLED = 0x894,
+    /**
+     * Data call was unsuccessfully transferred during the IRAT handover.
+     */
+    PENDING_REDIAL_CALL_CLEANUP = 0x895,
+    /**
+     * EMBMS data call has been successfully brought down.
+     */
+    EMBMS_REGULAR_DEACTIVATION = 0x896,
+    /**
+     * Test loop-back data call has been successfully brought down.
+     */
+    TLB_REGULAR_DEACTIVATION = 0x897,
+    /**
+     * Lower layer registration failure.
+     */
+    LOWER_LAYER_REGISTRATION_FAILURE = 0x898,
+    /**
+     * Network initiates a detach on LTE with error cause ""data plan has been replenished or has
+     * expired.
+     */
+    DETACH_EPS_SERVICES_NOT_ALLOWED = 0x899,
+    /**
+     * UMTS interface is brought down due to handover from UMTS to iWLAN.
+     */
+    SM_INTERNAL_PDP_DEACTIVATION = 0x89A,
+    /**
+     * The reception of a connection deny message with a deny code of general or network busy.
+     */
+    CD_GEN_OR_BUSY = 0x89B,
+    /**
+     * The reception of a connection deny message with a deny code of billing failure or
+     * authentication failure.
+     */
+    CD_BILL_OR_AUTH = 0x89C,
+    /**
+     * HDR system has been changed due to redirection or the PRL was not preferred.
+     */
+    HDR_CHANGED = 0x89D,
+    /**
+     * Device exited HDR due to redirection or the PRL was not preferred.
+     */
+    HDR_EXITED = 0x89E,
+    /**
+     * Device does not have an HDR session.
+     */
+    HDR_NO_SESSION = 0x89F,
+    /**
+     * It is ending an HDR call origination in favor of a GPS fix.
+     */
+    HDR_ORIG_DURING_GPS_FIX = 0x8A0,
+    /**
+     * Connection setup on the HDR system was time out.
+     */
+    HDR_CS_TIMEOUT = 0x8A1,
+    /**
+     * Device failed to acquire a co-located HDR for origination.
+     */
+    COLLOC_ACQ_FAIL = 0x8A2,
+    /**
+     * OTASP commit is in progress.
+     */
+    OTASP_COMMIT_IN_PROG = 0x8A3,
+    /**
+     * Device has no hybrid HDR service.
+     */
+    NO_HYBR_HDR_SRV = 0x8A4,
+    /**
+     * HDR module could not be obtained because of the RF locked.
+     */
+    HDR_NO_LOCK_GRANTED = 0x8A5,
+    /**
+     * DBM or SMS is in progress.
+     */
+    HOLD_OTHER_IN_PROG = 0x8A6,
+    /**
+     * HDR module released the call due to fade.
+     */
+    HDR_FADE = 0x8A7,
+    /**
+     * HDR system access failure.
+     */
+    HDR_ACC_FAIL = 0x8A8,
+    /**
+     * P_rev supported by 1 base station is less than 6, which is not supported for a 1X data call.
+     * The UE must be in the footprint of BS which has p_rev >= 6 to support this SO33 call.
+     */
+    UNSUPPORTED_1X_PREV = 0x8A9,
+    /**
+     * Client ended the data call.
+     */
+    LOCAL_END = 0x8AA,
+    /**
+     * Device has no service.
+     */
+    NO_SRV = 0x8AB,
+    /**
+     * Device lost the system due to fade.
+     */
+    FADE = 0x8AC,
+    /**
+     * Receiving a release from the base station with no reason.
+     */
+    REL_NORMAL = 0x8AD,
+    /**
+     * Access attempt is already in progress.
+     */
+    ACC_IN_PROG = 0x8AE,
+    /**
+     * Access failure.
+     */
+    ACC_FAIL = 0x8AF,
+    /**
+     * Device is in the process of redirecting or handing off to a different target system.
+     */
+    REDIR_OR_HANDOFF = 0x8B0,
+    /**
+     * Device is operating in Emergency mode.
+     */
+    EMERGENCY_MODE = 0x8B1,
+    /**
+     * Device is in use (e.g., voice call).
+     */
+    PHONE_IN_USE = 0x8B2,
+    /**
+     * Device operational mode is different from the mode requested in the traffic channel bring up
+     */
+    INVALID_MODE = 0x8B3,
+    /**
+     * SIM was marked by the network as invalid for the circuit and/or packet service domain.
+     */
+    INVALID_SIM_STATE = 0x8B4,
+    /**
+     * There is no co-located HDR.
+     */
+    NO_COLLOC_HDR = 0x8B5,
+    /**
+     * UE is entering power save mode.
+     */
+    EMM_DETACHED_PSM = 0x8B6,
+    /**
+     * Dual switch from single standby to dual standby is in progress.
+     */
+    DUAL_SWITCH = 0x8B7,
+    /**
+     * Data call bring up fails in the PPP setup due to a timeout.
+     * (e.g., an LCP conf ack was not received from the network)
+     */
+    PPP_TIMEOUT = 0x8B8,
+    /**
+     * Data call bring up fails in the PPP setup due to an authorization failure.
+     * (e.g., authorization is required, but not negotiated with the network during an LCP phase)
+     */
+    PPP_AUTH_FAILURE = 0x8B9,
+    /**
+     * Data call bring up fails in the PPP setup due to an option mismatch.
+     */
+    PPP_OPTION_MISMATCH = 0x8BA,
+    /**
+     * Data call bring up fails in the PPP setup due to a PAP failure.
+     */
+    PPP_PAP_FAILURE = 0x8BB,
+    /**
+     * Data call bring up fails in the PPP setup due to a CHAP failure.
+     */
+    PPP_CHAP_FAILURE = 0x8BC,
+    /**
+     * Data call bring up fails in the PPP setup because the PPP is in the process of cleaning the
+     * previous PPP session.
+     */
+    PPP_ERR_CLOSE_IN_PROGRESS = 0x8BD,
+    /**
+     * IPv6 interface bring up fails because the network provided only the IPv4 address for the
+     * upcoming PDN permanent client can reattempt a IPv6 call bring up after the IPv4 interface is
+     * also brought down. However, there is no guarantee that the network will provide a IPv6
+     * address.
+     */
+    EHRPD_SUBS_LIMITED_TO_V4 = 0x8BE,
+    /**
+     * IPv4 interface bring up fails because the network provided only the IPv6 address for the
+     * upcoming PDN permanent client can reattempt a IPv4 call bring up after the IPv6 interface is
+     * also brought down. However there is no guarantee that the network will provide a IPv4
+     * address.
+     */
+    EHRPD_SUBS_LIMITED_TO_V6 = 0x8BF,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a VSNCP timeout error.
+     */
+    EHRPD_VSNCP_TIMEOUT = 0x8C0,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a general error
+     */
+    EHRPD_VSNCP_GEN_ERROR = 0x8C1,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request because the requested APN is unauthorized.
+     */
+    EHRPD_VSNCP_UNAUTH_APN = 0x8C2,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request because the PDN limit has been exceeded.
+     */
+    EHRPD_VSNCP_PDN_LIMIT_EXCEED = 0x8C3,
+    /**
+     * Data call bring up fails in the VSNCP phase because the network rejected the VSNCP
+     * configuration request due to no PDN gateway.
+     */
+    EHRPD_VSNCP_NO_PDN_GW = 0x8C4,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request because the PDN gateway is unreachable.
+     */
+    EHRPD_VSNCP_PDN_GW_UNREACH = 0x8C5,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request due to a PDN gateway reject.
+     */
+    EHRPD_VSNCP_PDN_GW_REJ = 0x8C6,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request with the reason of insufficient parameter.
+     */
+    EHRPD_VSNCP_INSUFF_PARAM = 0x8C7,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request with the reason of resource unavailable.
+     */
+    EHRPD_VSNCP_RESOURCE_UNAVAIL = 0x8C8,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request with the reason of admin prohibited.
+     */
+    EHRPD_VSNCP_ADMIN_PROHIBIT = 0x8C9,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of PDN ID in use, or
+     * all existing PDNs are brought down with this end reason because one of the PDN bring up was
+     * rejected by the network with the reason of PDN ID in use.
+     */
+    EHRPD_VSNCP_PDN_ID_IN_USE = 0x8CA,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request for the reason of subscriber limitation.
+     */
+    EHRPD_VSNCP_SUBSCR_LIMITATION = 0x8CB,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request because the PDN exists for this APN.
+     */
+    EHRPD_VSNCP_PDN_EXISTS_FOR_THIS_APN = 0x8CC,
+    /**
+     * Data call bring up fails in the VSNCP phase due to a network rejection of the VSNCP
+     * configuration request with reconnect to this PDN not allowed, or an active data call is
+     * terminated by the network because reconnection to this PDN is not allowed. Upon receiving
+     * this error code from the network, the modem infinitely throttles the PDN until the next
+     * power cycle.
+     */
+    EHRPD_VSNCP_RECONNECT_NOT_ALLOWED = 0x8CD,
+    /**
+     * Device failure to obtain the prefix from the network.
+     */
+    IPV6_PREFIX_UNAVAILABLE = 0x8CE,
+    /**
+     * System preference change back to SRAT during handoff
+     */
+    HANDOFF_PREF_SYS_BACK_TO_SRAT = 0x8CF,
+};
+
+/**
+ * Data connection active status
+ */
+enum DataConnActiveStatus : int32_t {
+    /**
+     * Indicates the data connection is inactive.
+     */
+    INACTIVE = 0,
+    /**
+     * Indicates the data connection is active with physical link dormant.
+     */
+    DORMANT = 1,
+    /**
+     * Indicates the data connection is active with physical link up.
+     */
+    ACTIVE = 2,
+};
+
+/**
+ * Specifies the type of packet data protocol which is defined in TS 27.007 section 10.1.1.
+ */
+enum PdpProtocolType : int32_t {
+    /**
+     * Unknown protocol
+     */
+    UNKNOWN = -1,
+    /**
+     * Internet protocol
+     */
+    IP = 0,
+    /**
+     * Internet protocol, version 6
+     */
+    IPV6 = 1,
+    /**
+     * Virtual PDP type introduced to handle dual IP stack UE capability.
+     */
+    IPV4V6 = 2,
+    /**
+     * Point to point protocol
+     */
+    PPP = 3,
+    /**
+     * Transfer of Non-IP data to external packet data network
+     */
+    NON_IP = 4,
+    /**
+     * Ethernet protocol
+     */
+    ETHERNET = 5,
+    /**
+     * Transfer of Unstructured data to the Data Network via N6
+     */
+    UNSTRUCTURED = 6,
+};
+
+safe_union RadioFrequencyInfo {
+    /** A rough frequency range. */
+    FrequencyRange range;
+
+    /** The Absolute Radio Frequency Channel Number. */
+    int32_t channelNumber;
+};
+
+struct PhysicalChannelConfig {
+    @1.2::PhysicalChannelConfig base;
+
+    /** The radio technology for this physical channel. */
+    RadioTechnology rat;
+
+    /** The radio frequency info. */
+    RadioFrequencyInfo rfInfo;
+
+    /**
+     * A list of data calls mapped to this physical channel. The context id must match the cid of
+     * @1.4::SetupDataCallResult. An empty list means the physical channel has no data call mapped
+     * to it.
+     */
+    vec<int32_t> contextIds;
+
+    /**
+     * The physical cell identifier for this cell.
+     *
+     * In UTRAN, this value is primary scrambling code. The range is [0, 511].
+     * Reference: 3GPP TS 25.213 section 5.2.2.
+     *
+     * In EUTRAN, this value is physical layer cell identity. The range is [0, 503].
+     * Reference: 3GPP TS 36.211 section 6.11.
+     *
+     * In 5G RAN, this value is physical layer cell identity. The range is [0, 1008].
+     * Reference: 3GPP TS 38.211 section 7.4.2.1.
+     */
+    uint32_t physicalCellId;
+};
+
+/**
+ * Type to define the LTE specific network capabilities for voice over PS including
+ * emergency and normal voice calls.
+ */
+struct LteVopsInfo {
+    /**
+     * This indicates if camped network support VoLTE services. This information is received
+     * from LTE network during LTE NAS registration procedure through LTE ATTACH ACCEPT/TAU
+     * ACCEPT. Refer 3GPP 24.301 EPS network feature support -> IMS VoPS
+     */
+    bool isVopsSupported;
+    /**
+     * This indicates if camped network support VoLTE emergency bearers. This information
+     * is received from LTE network through two sources:
+     * a. During LTE NAS registration procedure through LTE ATTACH ACCEPT/TAU ACCEPT. Refer
+     *    3GPP 24.301 EPS network feature support -> EMC BS
+     * b. In case device is not registered on network. Refer 3GPP 25.331 LTE RRC
+     *    SIB1 : ims-EmergencySupport-r9
+     * If device is registered on LTE, then this field indicates (a).
+     * In case of limited service on LTE this field indicates (b).
+     */
+    bool isEmcBearerSupported;
+};
+
+/** The parameters of NR 5G Non-Standalone. */
+struct NrIndicators {
+    /**
+     * Indicates that if E-UTRA-NR Dual Connectivity (EN-DC) is supported by the primary serving
+     * cell.
+     *
+     * True the primary serving cell is LTE cell and the plmn-InfoList-r15 is present in SIB2 and
+     * at least one bit in this list is true, otherwise this value should be false.
+     *
+     * Reference: 3GPP TS 36.331 v15.2.2 6.3.1 System information blocks.
+     */
+    bool isEndcAvailable;
+
+    /**
+     * True if use of dual connectivity with NR is restricted.
+     * Reference: 3GPP TS 24.301 v15.03 section 9.3.3.12A.
+     */
+    bool isDcNrRestricted;
+
+    /**
+     * True if the bit N is in the PLMN-InfoList-r15 is true and the selected PLMN is present in
+     * plmn-IdentityList at position N.
+     * Reference: 3GPP TS 36.331 v15.2.2 section 6.3.1 PLMN-InfoList-r15.
+     *            3GPP TS 36.331 v15.2.2 section 6.2.2 SystemInformationBlockType1 message.
+     */
+    bool isNrAvailable;
+};
+
+struct DataRegStateResult {
+    @1.2::DataRegStateResult base;
+
+    /**
+     * Network capabilities for voice over PS services. This info is valid only on LTE network and
+     * must be present when device is camped on LTE. vopsInfo must be empty when device is camped
+     * only on 2G/3G.
+     */
+    safe_union VopsInfo {
+        Monostate noinit;
+
+        LteVopsInfo lteVopsInfo; // LTE network capability
+    } vopsInfo;
+
+    /**
+     * The parameters of NR 5G Non-Standalone. This value is only valid on E-UTRAN, otherwise
+     * must be empty.
+     */
+    NrIndicators nrIndicators;
+};
+
+/** Contains the configuration of the LTE cell tower. */
+struct CellConfigLte {
+    /**
+     * Indicates that if E-UTRA-NR Dual Connectivity (EN-DC) is supported by the LTE cell.
+     *
+     * True if the plmn-InfoList-r15 is present in SIB2 and at least one bit in this list is true,
+     * otherwise this value should be false.
+     *
+     * Reference: 3GPP TS 36.331 v15.2.2 6.3.1 System information blocks.
+     */
+    bool isEndcAvailable;
+};
+
+/** Inherits from @1.2::CellInfoLte, in order to add the LTE configuration. */
+struct CellInfoLte {
+    @1.2::CellInfoLte base;
+    CellConfigLte cellConfig;
+};
+
+/** Overwritten from @1.2::CellInfo in order to update the CellInfoLte to 1.4 version. */
+struct CellInfo {
+    /** Cell type for selecting from union CellInfo. */
+    CellInfoType cellInfoType;
+
+    /**
+     * True if the phone is registered to a mobile network that provides service on this cell and
+     * this cell is being used or would be used for network signaling.
+     */
+    bool isRegistered;
+
+    /** CellInfo details, cellInfoType can tell which cell info should be used. */
+    safe_union Info {
+        CellInfoGsm gsm;
+        CellInfoCdma cdma;
+        CellInfoWcdma wcdma;
+        CellInfoTdscdma tdscdma;
+        CellInfoLte lte;
+    } info;
+};
+
+/** Overwritten from @1.2::NetworkScanResult in order to update the CellInfo to 1.4 version. */
+struct NetworkScanResult {
+    /**
+     * The status of the scan.
+     */
+    ScanStatus status;
+
+    /**
+     * The error code of the incremental result.
+     */
+    RadioError error;
+
+    /**
+     * List of network information as CellInfo.
+     */
+    vec<CellInfo> networkInfos;
+};
+
+/**
+ * Overwritten from @1.0::DataProfileInfo in order to deprecate 'mvnoType', and 'mvnoMatchData'.
+ * In the future, this must be extended instead of overwritten.
+ * Also added 'preferred' and 'persistent' in this version.
+ */
+struct DataProfileInfo {
+    /** id of the data profile */
+    DataProfileId profileId;
+
+    /** The APN name */
+    string apn;
+
+    /** PDP_type values */
+    PdpProtocolType protocol;
+
+    /** PDP_type values used on roaming network */
+    PdpProtocolType roamingProtocol;
+
+    /** APN authentication type */
+    ApnAuthType authType;
+
+    /** The username for APN, or empty string */
+    string user;
+
+    /** The password for APN, or empty string */
+    string password;
+
+    /** Data profile technology type */
+    DataProfileInfoType type;
+
+    /** The period in seconds to limit the maximum connections */
+    int32_t maxConnsTime;
+
+    /** The maximum connections during maxConnsTime */
+    int32_t maxConns;
+
+    /**
+     * The required wait time in seconds after a successful UE initiated disconnect of a given PDN
+     * connection before the device can send a new PDN connection request for that given PDN.
+     */
+    int32_t waitTime;
+
+    /** True to enable the profile, false to disable */
+    bool enabled;
+
+    /** Supported APN types bitmap. See ApnTypes for the value of each bit. */
+    bitfield<ApnTypes> supportedApnTypesBitmap;
+
+    /** The bearer bitmap. See RadioAccessFamily for the value of each bit. */
+    bitfield<RadioAccessFamily> bearerBitmap;
+
+    /** Maximum transmission unit (MTU) size in bytes */
+    int32_t mtu;
+
+    /**
+     * True if this data profile was used to bring up the last default (i.e internet) data
+     * connection successfully.
+     */
+    bool preferred;
+
+    /**
+     * If true, modem must persist this data profile and profileId must not be
+     * set to DataProfileId.INVALID. If the same data profile exists, this data profile must
+     * overwrite it.
+     */
+    bool persistent;
+};
+
+struct CardStatus {
+    @1.2::CardStatus base;
+    /**
+     * The EID is the eUICC identifier. The EID shall be stored within the ECASD and can be
+     * retrieved by the Device at any time using the standard GlobalPlatform GET DATA command.
+     *
+     * This data is mandatory and applicable only when cardState is CardState:PRESENT and SIM card
+     * supports eUICC.
+     */
+    string eid;
+};
+
+/** Overwritten from @1.0::RadioCapability in order to use the latest RadioAccessFamily. */
+struct RadioCapability {
+    /** Unique session value defined by fr amework returned in all "responses/unslo". */
+    int32_t session;
+
+    RadioCapabilityPhase phase;
+
+    /** 32-bit bitmap of RadioAccessFamily. */
+    bitfield<RadioAccessFamily> raf;
+
+    /**
+     * A UUID typically "com.xxxx.lmX" where X is the logical modem.
+     * RadioConst:MAX_UUID_LENGTH is the max length.
+     */
+    string logicalModemUuid;
+
+    RadioCapabilityStatus status;
+};
+
+/**
+ * Overwritten from @1.0::SetupDataCallResult in order to update the DataCallFailCause to 1.4
+ * version.
+ */
+struct SetupDataCallResult {
+    /** Data call fail cause. DataCallFailCause.NONE if no error. */
+    DataCallFailCause cause;
+
+    /**
+     * If status != DataCallFailCause.NONE, this field indicates the suggested retry back-off timer
+     * value RIL wants to override the one pre-configured in FW. The unit is milliseconds.
+     * The value < 0 means no value is suggested.
+     * The value 0 means retry must be done ASAP.
+     * The value of INT_MAX(0x7fffffff) means no retry.
+     */
+    int32_t suggestedRetryTime;
+
+    /** Context ID, uniquely identifies this call. */
+    int32_t cid;
+
+    /** Data connection active status. */
+    DataConnActiveStatus active;
+
+    /**
+     * PDP_type values. If cause is DataCallFailCause.ONLY_SINGLE_BEARER_ALLOWED, this is the type
+     * supported such as "IP" or "IPV6".
+     */
+    PdpProtocolType type;
+
+    /** The network interface name. */
+    string ifname;
+
+    /**
+     * List of addresses with optional "/" prefix length, e.g., "192.0.1.3" or
+     * "192.0.1.11/16 2001:db8::1/64".  Typically one IPv4 or one IPv6 or one of each. If the
+     * prefix length is absent the addresses are assumed to be point to point with IPv4 having a
+     * prefix length of 32 and IPv6 128.
+     */
+    vec<string> addresses;
+
+    /**
+     * List of DNS server addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". Empty if no dns
+     * server addresses returned.
+     */
+    vec<string> dnses;
+
+    /**
+     * List of default gateway addresses, e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+     * When empty, the addresses represent point to point connections.
+     */
+    vec<string> gateways;
+
+    /**
+     * List of P-CSCF(Proxy Call State Control Function) addresses via PCO(Protocol Configuration
+     * Option), e.g., "2001:db8::1 2001:db8::2 2001:db8::3". Empty if not IMS client.
+     */
+    vec<string> pcscf;
+
+    /**
+     * MTU received from network. Value <= 0 means network has either not sent a value or sent an
+     * invalid value.
+     */
+    int32_t mtu;
+};
diff --git a/radio/config/1.0/vts/functional/Android.bp b/radio/config/1.0/vts/functional/Android.bp
index aa8266e..9c96030 100644
--- a/radio/config/1.0/vts/functional/Android.bp
+++ b/radio/config/1.0/vts/functional/Android.bp
@@ -29,4 +29,5 @@
         "android.hardware.radio.config@1.0",
     ],
     header_libs: ["radio.util.header@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/radio/config/1.1/Android.bp b/radio/config/1.1/Android.bp
new file mode 100644
index 0000000..056510c
--- /dev/null
+++ b/radio/config/1.1/Android.bp
@@ -0,0 +1,26 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.radio.config@1.1",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "IRadioConfig.hal",
+        "IRadioConfigIndication.hal",
+        "IRadioConfigResponse.hal",
+        "types.hal",
+    ],
+    interfaces: [
+        "android.hardware.radio.config@1.0",
+        "android.hardware.radio@1.0",
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "ModemInfo",
+        "PhoneCapability",
+    ],
+    gen_java: true,
+}
+
diff --git a/radio/config/1.1/IRadioConfig.hal b/radio/config/1.1/IRadioConfig.hal
new file mode 100644
index 0000000..bc63339
--- /dev/null
+++ b/radio/config/1.1/IRadioConfig.hal
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.config@1.1;
+
+import @1.0::IRadioConfig;
+import @1.1::IRadioConfigResponse;
+import @1.1::PhoneCapability;
+
+/**
+ * Note: IRadioConfig 1.1 is an intermediate layer between Android P and Android Q.
+ * It's specifically designed for CBRS related interfaces. All other interfaces
+ * for Q are added in IRadioConfig 1.2.
+ *
+ * This interface is used by telephony and telecom to talk to cellular radio for the purpose of
+ * radio configuration, and it is not associated with any specific modem or slot.
+ * All the functions have minimum one parameter:
+ * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
+ * duration of a method call. If clients provide colliding serials (including passing the same
+ * serial to different methods), multiple responses (one for each method call) must still be served.
+ */
+interface IRadioConfig extends @1.0::IRadioConfig {
+   /**
+     * Request current phone capability.
+     *
+     * @param serial Serial number of request.
+     *
+     * Response callback is IRadioResponse.getPhoneCapabilityResponse() which
+     * will return <@1.1::PhoneCapability>.
+     */
+    oneway getPhoneCapability(int32_t serial);
+
+   /**
+     * Set preferred data modem Id.
+     * In a multi-SIM device, notify modem layer which logical modem will be used primarily
+     * for data. It helps modem with resource optimization and decisions of what data connections
+     * should be satisfied.
+     *
+     * @param serial Serial number of request.
+     * @param modem Id the logical modem ID, which should match one of modem IDs returned
+     * from getPhoneCapability().
+     *
+     * Response callback is IRadioConfigResponse.setPreferredDataModemResponse()
+     */
+    oneway setPreferredDataModem(int32_t serial, uint8_t modemId);
+};
diff --git a/radio/config/1.1/IRadioConfigIndication.hal b/radio/config/1.1/IRadioConfigIndication.hal
new file mode 100644
index 0000000..f919201
--- /dev/null
+++ b/radio/config/1.1/IRadioConfigIndication.hal
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.config@1.1;
+
+import @1.0::IRadioConfigIndication;
+
+/**
+ * Interface declaring unsolicited radio config indications.
+ */
+interface IRadioConfigIndication extends @1.0::IRadioConfigIndication {
+};
diff --git a/radio/config/1.1/IRadioConfigResponse.hal b/radio/config/1.1/IRadioConfigResponse.hal
new file mode 100644
index 0000000..42a31b1
--- /dev/null
+++ b/radio/config/1.1/IRadioConfigResponse.hal
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.config@1.1;
+
+import @1.0::IRadioConfigResponse;
+import @1.1::PhoneCapability;
+import android.hardware.radio@1.0::RadioResponseInfo;
+
+/**
+ * Note: IRadioConfig 1.1 is an intermediate layer between Android P and Android Q.
+ * It's specifically designed for CBRS related interfaces. All other interfaces
+ * for Q are be added in IRadioConfig 1.2.
+ *
+ * Interface declaring response functions to solicited radio config requests.
+ */
+interface IRadioConfigResponse extends @1.0::IRadioConfigResponse {
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param phoneCapability <@1.1::PhoneCapability> it defines modem's capability for example
+     *        how many logical modems it has, how many data connections it supports.
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     */
+    oneway getPhoneCapabilityResponse(RadioResponseInfo info, PhoneCapability phoneCapability);
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:INVALID_ARGUMENTS
+     */
+    oneway setPreferredDataModemResponse(RadioResponseInfo info);
+};
diff --git a/radio/config/1.1/types.hal b/radio/config/1.1/types.hal
new file mode 100644
index 0000000..a7b9f86
--- /dev/null
+++ b/radio/config/1.1/types.hal
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.config@1.1;
+
+/**
+ * Note: IRadioConfig 1.1 is an intermediate layer between Android P and Android Q.
+ * It's specifically designed for CBRS related interfaces. All other interfaces
+ * for Q are be added in IRadioConfig 1.2.
+ */
+
+/**
+ * A field in PhoneCapability that has information of each logical modem.
+ */
+struct ModemInfo {
+    /**
+     * Logical modem ID.
+     */
+    uint8_t modemId;
+};
+
+/**
+ * Phone capability which describes the data connection capability of modem.
+ * It's used to evaluate possible phone config change, for example from single
+ * SIM device to multi-SIM device.
+ */
+struct PhoneCapability {
+    /**
+     * maxActiveData defines how many logical modems can have
+     * PS attached simultaneously. For example, for L+L modem it
+     * should be 2.
+     */
+    uint8_t maxActiveData;
+    /**
+     * maxActiveData defines how many logical modems can have
+     * internet PDN connections simultaneously. For example, for L+L
+     * DSDS modem it’s 1, and for DSDA modem it’s 2.
+     */
+    uint8_t maxActiveInternetData;
+    /**
+     * Whether modem supports both internet PDN up so
+     * that we can do ping test before tearing down the
+     * other one.
+     */
+    bool isInternetLingeringSupported;
+    /**
+     * List of logical modem information.
+     */
+    vec<ModemInfo> logicalModemList;
+};
diff --git a/radio/config/1.2/Android.bp b/radio/config/1.2/Android.bp
new file mode 100644
index 0000000..3e6a425
--- /dev/null
+++ b/radio/config/1.2/Android.bp
@@ -0,0 +1,25 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.radio.config@1.2",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IRadioConfigIndication.hal",
+        "IRadioConfigResponse.hal",
+    ],
+    interfaces: [
+        "android.hardware.radio.config@1.0",
+        "android.hardware.radio.config@1.1",
+        "android.hardware.radio@1.0",
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "SimSlotStatus",
+    ],
+    gen_java: true,
+}
+
diff --git a/radio/config/1.2/IRadioConfigIndication.hal b/radio/config/1.2/IRadioConfigIndication.hal
new file mode 100644
index 0000000..a3ae558
--- /dev/null
+++ b/radio/config/1.2/IRadioConfigIndication.hal
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.config@1.2;
+
+import android.hardware.radio@1.0::RadioIndicationType;
+import @1.1::IRadioConfigIndication;
+
+/**
+ * Interface declaring unsolicited radio config indications.
+ */
+interface IRadioConfigIndication extends @1.1::IRadioConfigIndication {
+
+    /**
+     * Indicates SIM slot status change.
+     *
+     * This indication must be sent by the modem whenever there is any slot status change, even the
+     * slot is inactive. For example, this indication must be triggered if a SIM card is inserted
+     * into an inactive slot.
+     *
+     * @param type Type of radio indication
+     * @param slotStatus new slot status info with size equals to the number of physical slots on
+     *        the device
+     */
+    oneway simSlotsStatusChanged_1_2(RadioIndicationType type, vec<SimSlotStatus> slotStatus);
+};
\ No newline at end of file
diff --git a/radio/config/1.2/IRadioConfigResponse.hal b/radio/config/1.2/IRadioConfigResponse.hal
new file mode 100644
index 0000000..dbc3bc5
--- /dev/null
+++ b/radio/config/1.2/IRadioConfigResponse.hal
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.config@1.2;
+
+import android.hardware.radio@1.0::RadioResponseInfo;
+import @1.1::IRadioConfigResponse;
+import @1.2::SimSlotStatus;
+
+/**
+ * Interface declaring response functions to solicited radio config requests.
+ */
+interface IRadioConfigResponse extends @1.1::IRadioConfigResponse {
+
+    /**
+     * @param info Response info struct containing response type, serial no. and error
+     * @param slotStatus Sim slot struct containing all the physical SIM slots info with size
+     *        equal to the number of physical slots on the device
+     *
+     * Valid errors returned:
+     *   RadioError:NONE
+     *   RadioError:RADIO_NOT_AVAILABLE
+     *   RadioError:NO_MEMORY
+     *   RadioError:INTERNAL_ERR
+     *   RadioError:MODEM_ERR
+     */
+    oneway getSimSlotsStatusResponse_1_2(RadioResponseInfo info, vec<SimSlotStatus> slotStatus);
+};
\ No newline at end of file
diff --git a/radio/config/1.2/types.hal b/radio/config/1.2/types.hal
new file mode 100644
index 0000000..5b809a7
--- /dev/null
+++ b/radio/config/1.2/types.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio.config@1.2;
+
+import android.hardware.radio@1.0::CardState;
+import @1.0::SimSlotStatus;
+
+struct SimSlotStatus {
+    @1.0::SimSlotStatus base;
+    /**
+     * The EID is the eUICC identifier. The EID shall be stored within the ECASD and can be
+     * retrieved by the Device at any time using the standard GlobalPlatform GET DATA command.
+     *
+     * This data is mandatory and applicable only when cardState is CardState:PRESENT and SIM card
+     * supports eUICC.
+     */
+    string eid;
+};
\ No newline at end of file
diff --git a/renderscript/1.0/default/Context.cpp b/renderscript/1.0/default/Context.cpp
index f5b70c9..bb2a40e 100644
--- a/renderscript/1.0/default/Context.cpp
+++ b/renderscript/1.0/default/Context.cpp
@@ -1,3 +1,19 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
 #include "Context.h"
 #include "Device.h"
 
diff --git a/renderscript/1.0/default/Context.h b/renderscript/1.0/default/Context.h
index d8bfe4f..4ed2d9a 100644
--- a/renderscript/1.0/default/Context.h
+++ b/renderscript/1.0/default/Context.h
@@ -1,3 +1,19 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
 #ifndef ANDROID_HARDWARE_RENDERSCRIPT_V1_0_CONTEXT_H
 #define ANDROID_HARDWARE_RENDERSCRIPT_V1_0_CONTEXT_H
 
diff --git a/renderscript/1.0/default/Device.cpp b/renderscript/1.0/default/Device.cpp
index 8fda3ff..d603a12 100644
--- a/renderscript/1.0/default/Device.cpp
+++ b/renderscript/1.0/default/Device.cpp
@@ -1,3 +1,19 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
 #include "Context.h"
 #include "Device.h"
 
diff --git a/renderscript/1.0/default/Device.h b/renderscript/1.0/default/Device.h
index f5bda37..74e1907 100644
--- a/renderscript/1.0/default/Device.h
+++ b/renderscript/1.0/default/Device.h
@@ -1,3 +1,19 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
 #ifndef ANDROID_HARDWARE_RENDERSCRIPT_V1_0_DEVICE_H
 #define ANDROID_HARDWARE_RENDERSCRIPT_V1_0_DEVICE_H
 
diff --git a/renderscript/1.0/vts/functional/Android.bp b/renderscript/1.0/vts/functional/Android.bp
index bf011e6..87e62f1 100644
--- a/renderscript/1.0/vts/functional/Android.bp
+++ b/renderscript/1.0/vts/functional/Android.bp
@@ -28,4 +28,5 @@
         "android.hardware.renderscript@1.0",
         "libnativewindow",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/renderscript/1.0/vts/functional/VtsScriptTests.cpp b/renderscript/1.0/vts/functional/VtsScriptTests.cpp
index 8268dcc..8d24cfa 100644
--- a/renderscript/1.0/vts/functional/VtsScriptTests.cpp
+++ b/renderscript/1.0/vts/functional/VtsScriptTests.cpp
@@ -54,12 +54,12 @@
                            [&](const hidl_vec<uint8_t>& _data){ resultI = *((int*)_data.data()); });
     EXPECT_EQ(100, resultI);
 
-    context->scriptSetVarJ(script, mExportVarIdx_var_long, 101l);
+    context->scriptSetVarJ(script, mExportVarIdx_var_long, 101L);
     int resultJ = 0;
     context->scriptGetVarV(script, mExportVarIdx_var_long, sizeof(long),
                            [&](const hidl_vec<uint8_t>& _data){
                                resultJ = *((long*)_data.data()); });
-    EXPECT_EQ(101l, resultJ);
+    EXPECT_EQ(101L, resultJ);
 
     context->scriptSetVarF(script, mExportVarIdx_var_float, 102.0f);
     int resultF = 0.0f;
@@ -140,7 +140,7 @@
 
     // invoke test
     int resultI = 0;
-    long resultJ = 0l;
+    long resultJ = 0L;
     float resultF = 0.0f;
     double resultD = 0.0;
     uint32_t resultV = 0u;
@@ -165,7 +165,7 @@
                                resultVE = std::vector<int>(
                                    (int*)_data.data(), (int*)_data.data() + 2); });
     EXPECT_EQ(1, resultI);
-    EXPECT_EQ(2l, resultJ);
+    EXPECT_EQ(2L, resultJ);
     EXPECT_EQ(3.0f, resultF);
     EXPECT_EQ(4.0, resultD);
     EXPECT_EQ(5u, resultV);
diff --git a/secure_element/1.0/vts/functional/Android.bp b/secure_element/1.0/vts/functional/Android.bp
index 752df9e..2b2b73e 100644
--- a/secure_element/1.0/vts/functional/Android.bp
+++ b/secure_element/1.0/vts/functional/Android.bp
@@ -21,4 +21,5 @@
     static_libs: [
         "android.hardware.secure_element@1.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/sensors/1.0/default/convert.cpp b/sensors/1.0/default/convert.cpp
index a5747d4..52f5e4f 100644
--- a/sensors/1.0/default/convert.cpp
+++ b/sensors/1.0/default/convert.cpp
@@ -74,8 +74,7 @@
     };
 
     switch (dst->sensorType) {
-        case SensorType::META_DATA:
-        {
+        case SensorType::META_DATA: {
             dst->u.meta.what = (MetaDataEventType)src.meta_data.what;
             // Legacy HALs contain the handle reference in the meta data field.
             // Copy that over to the handle of the event. In legacy HALs this
@@ -89,8 +88,7 @@
         case SensorType::ORIENTATION:
         case SensorType::GYROSCOPE:
         case SensorType::GRAVITY:
-        case SensorType::LINEAR_ACCELERATION:
-        {
+        case SensorType::LINEAR_ACCELERATION: {
             dst->u.vec3.x = src.acceleration.x;
             dst->u.vec3.y = src.acceleration.y;
             dst->u.vec3.z = src.acceleration.z;
@@ -98,10 +96,7 @@
             break;
         }
 
-        case SensorType::ROTATION_VECTOR:
-        case SensorType::GAME_ROTATION_VECTOR:
-        case SensorType::GEOMAGNETIC_ROTATION_VECTOR:
-        {
+        case SensorType::GAME_ROTATION_VECTOR: {
             dst->u.vec4.x = src.data[0];
             dst->u.vec4.y = src.data[1];
             dst->u.vec4.z = src.data[2];
@@ -109,151 +104,150 @@
             break;
         }
 
-      case SensorType::MAGNETIC_FIELD_UNCALIBRATED:
-      case SensorType::GYROSCOPE_UNCALIBRATED:
-      case SensorType::ACCELEROMETER_UNCALIBRATED:
-      {
-          dst->u.uncal.x = src.uncalibrated_gyro.x_uncalib;
-          dst->u.uncal.y = src.uncalibrated_gyro.y_uncalib;
-          dst->u.uncal.z = src.uncalibrated_gyro.z_uncalib;
-          dst->u.uncal.x_bias = src.uncalibrated_gyro.x_bias;
-          dst->u.uncal.y_bias = src.uncalibrated_gyro.y_bias;
-          dst->u.uncal.z_bias = src.uncalibrated_gyro.z_bias;
-          break;
-      }
+        case SensorType::ROTATION_VECTOR:
+        case SensorType::GEOMAGNETIC_ROTATION_VECTOR: {
+            dst->u.data[0] = src.data[0];
+            dst->u.data[1] = src.data[1];
+            dst->u.data[2] = src.data[2];
+            dst->u.data[3] = src.data[3];
+            dst->u.data[4] = src.data[4];
+            break;
+        }
 
-      case SensorType::DEVICE_ORIENTATION:
-      case SensorType::LIGHT:
-      case SensorType::PRESSURE:
-      case SensorType::TEMPERATURE:
-      case SensorType::PROXIMITY:
-      case SensorType::RELATIVE_HUMIDITY:
-      case SensorType::AMBIENT_TEMPERATURE:
-      case SensorType::SIGNIFICANT_MOTION:
-      case SensorType::STEP_DETECTOR:
-      case SensorType::TILT_DETECTOR:
-      case SensorType::WAKE_GESTURE:
-      case SensorType::GLANCE_GESTURE:
-      case SensorType::PICK_UP_GESTURE:
-      case SensorType::WRIST_TILT_GESTURE:
-      case SensorType::STATIONARY_DETECT:
-      case SensorType::MOTION_DETECT:
-      case SensorType::HEART_BEAT:
-      case SensorType::LOW_LATENCY_OFFBODY_DETECT:
-      {
-          dst->u.scalar = src.data[0];
-          break;
-      }
+        case SensorType::MAGNETIC_FIELD_UNCALIBRATED:
+        case SensorType::GYROSCOPE_UNCALIBRATED:
+        case SensorType::ACCELEROMETER_UNCALIBRATED: {
+            dst->u.uncal.x = src.uncalibrated_gyro.x_uncalib;
+            dst->u.uncal.y = src.uncalibrated_gyro.y_uncalib;
+            dst->u.uncal.z = src.uncalibrated_gyro.z_uncalib;
+            dst->u.uncal.x_bias = src.uncalibrated_gyro.x_bias;
+            dst->u.uncal.y_bias = src.uncalibrated_gyro.y_bias;
+            dst->u.uncal.z_bias = src.uncalibrated_gyro.z_bias;
+            break;
+        }
 
-      case SensorType::STEP_COUNTER:
-      {
-          dst->u.stepCount = src.u64.step_counter;
-          break;
-      }
+        case SensorType::DEVICE_ORIENTATION:
+        case SensorType::LIGHT:
+        case SensorType::PRESSURE:
+        case SensorType::TEMPERATURE:
+        case SensorType::PROXIMITY:
+        case SensorType::RELATIVE_HUMIDITY:
+        case SensorType::AMBIENT_TEMPERATURE:
+        case SensorType::SIGNIFICANT_MOTION:
+        case SensorType::STEP_DETECTOR:
+        case SensorType::TILT_DETECTOR:
+        case SensorType::WAKE_GESTURE:
+        case SensorType::GLANCE_GESTURE:
+        case SensorType::PICK_UP_GESTURE:
+        case SensorType::WRIST_TILT_GESTURE:
+        case SensorType::STATIONARY_DETECT:
+        case SensorType::MOTION_DETECT:
+        case SensorType::HEART_BEAT:
+        case SensorType::LOW_LATENCY_OFFBODY_DETECT: {
+            dst->u.scalar = src.data[0];
+            break;
+        }
 
-      case SensorType::HEART_RATE:
-      {
-          dst->u.heartRate.bpm = src.heart_rate.bpm;
-          dst->u.heartRate.status = (SensorStatus)src.heart_rate.status;
-          break;
-      }
+        case SensorType::STEP_COUNTER: {
+            dst->u.stepCount = src.u64.step_counter;
+            break;
+        }
 
-      case SensorType::POSE_6DOF:  // 15 floats
-      {
-          for (size_t i = 0; i < 15; ++i) {
-              dst->u.pose6DOF[i] = src.data[i];
-          }
-          break;
-      }
+        case SensorType::HEART_RATE: {
+            dst->u.heartRate.bpm = src.heart_rate.bpm;
+            dst->u.heartRate.status = (SensorStatus)src.heart_rate.status;
+            break;
+        }
 
-      case SensorType::DYNAMIC_SENSOR_META:
-      {
-          dst->u.dynamic.connected = src.dynamic_sensor_meta.connected;
-          dst->u.dynamic.sensorHandle = src.dynamic_sensor_meta.handle;
+        case SensorType::POSE_6DOF: {  // 15 floats
+            for (size_t i = 0; i < 15; ++i) {
+                dst->u.pose6DOF[i] = src.data[i];
+            }
+            break;
+        }
 
-          memcpy(dst->u.dynamic.uuid.data(),
-                 src.dynamic_sensor_meta.uuid,
-                 16);
+        case SensorType::DYNAMIC_SENSOR_META: {
+            dst->u.dynamic.connected = src.dynamic_sensor_meta.connected;
+            dst->u.dynamic.sensorHandle = src.dynamic_sensor_meta.handle;
 
-          break;
-      }
+            memcpy(dst->u.dynamic.uuid.data(), src.dynamic_sensor_meta.uuid, 16);
 
-      case SensorType::ADDITIONAL_INFO:
-      {
-          ::android::hardware::sensors::V1_0::AdditionalInfo *dstInfo =
-              &dst->u.additional;
+            break;
+        }
 
-          const additional_info_event_t &srcInfo = src.additional_info;
+        case SensorType::ADDITIONAL_INFO: {
+            ::android::hardware::sensors::V1_0::AdditionalInfo* dstInfo = &dst->u.additional;
 
-          dstInfo->type =
-              (::android::hardware::sensors::V1_0::AdditionalInfoType)
-                  srcInfo.type;
+            const additional_info_event_t& srcInfo = src.additional_info;
 
-          dstInfo->serial = srcInfo.serial;
+            dstInfo->type = (::android::hardware::sensors::V1_0::AdditionalInfoType)srcInfo.type;
 
-          CHECK_EQ(sizeof(dstInfo->u), sizeof(srcInfo.data_int32));
-          memcpy(&dstInfo->u, srcInfo.data_int32, sizeof(srcInfo.data_int32));
-          break;
-      }
+            dstInfo->serial = srcInfo.serial;
 
-      default:
-      {
-          CHECK_GE((int32_t)dst->sensorType,
-                   (int32_t)SensorType::DEVICE_PRIVATE_BASE);
+            CHECK_EQ(sizeof(dstInfo->u), sizeof(srcInfo.data_int32));
+            memcpy(&dstInfo->u, srcInfo.data_int32, sizeof(srcInfo.data_int32));
+            break;
+        }
 
-          memcpy(dst->u.data.data(), src.data, 16 * sizeof(float));
-          break;
-      }
-  }
+        default: {
+            CHECK_GE((int32_t)dst->sensorType, (int32_t)SensorType::DEVICE_PRIVATE_BASE);
+
+            memcpy(dst->u.data.data(), src.data, 16 * sizeof(float));
+            break;
+        }
+    }
 }
 
 void convertToSensorEvent(const Event &src, sensors_event_t *dst) {
-  *dst = {
-      .version = sizeof(sensors_event_t),
-      .sensor = src.sensorHandle,
-      .type = (int32_t)src.sensorType,
-      .reserved0 = 0,
-      .timestamp = src.timestamp
-  };
+    *dst = {.version = sizeof(sensors_event_t),
+            .sensor = src.sensorHandle,
+            .type = (int32_t)src.sensorType,
+            .reserved0 = 0,
+            .timestamp = src.timestamp};
 
-  switch (src.sensorType) {
-      case SensorType::META_DATA:
-      {
-          // Legacy HALs expect the handle reference in the meta data field.
-          // Copy it over from the handle of the event.
-          dst->meta_data.what = (int32_t)src.u.meta.what;
-          dst->meta_data.sensor = src.sensorHandle;
-          // Set the sensor handle to 0 to maintain compatibility.
-          dst->sensor = 0;
-          break;
-      }
+    switch (src.sensorType) {
+        case SensorType::META_DATA: {
+            // Legacy HALs expect the handle reference in the meta data field.
+            // Copy it over from the handle of the event.
+            dst->meta_data.what = (int32_t)src.u.meta.what;
+            dst->meta_data.sensor = src.sensorHandle;
+            // Set the sensor handle to 0 to maintain compatibility.
+            dst->sensor = 0;
+            break;
+        }
 
-      case SensorType::ACCELEROMETER:
-      case SensorType::MAGNETIC_FIELD:
-      case SensorType::ORIENTATION:
-      case SensorType::GYROSCOPE:
-      case SensorType::GRAVITY:
-      case SensorType::LINEAR_ACCELERATION:
-      {
-          dst->acceleration.x = src.u.vec3.x;
-          dst->acceleration.y = src.u.vec3.y;
-          dst->acceleration.z = src.u.vec3.z;
-          dst->acceleration.status = (int8_t)src.u.vec3.status;
-          break;
-      }
+        case SensorType::ACCELEROMETER:
+        case SensorType::MAGNETIC_FIELD:
+        case SensorType::ORIENTATION:
+        case SensorType::GYROSCOPE:
+        case SensorType::GRAVITY:
+        case SensorType::LINEAR_ACCELERATION: {
+            dst->acceleration.x = src.u.vec3.x;
+            dst->acceleration.y = src.u.vec3.y;
+            dst->acceleration.z = src.u.vec3.z;
+            dst->acceleration.status = (int8_t)src.u.vec3.status;
+            break;
+        }
 
-      case SensorType::ROTATION_VECTOR:
-      case SensorType::GAME_ROTATION_VECTOR:
-      case SensorType::GEOMAGNETIC_ROTATION_VECTOR:
-      {
-          dst->data[0] = src.u.vec4.x;
-          dst->data[1] = src.u.vec4.y;
-          dst->data[2] = src.u.vec4.z;
-          dst->data[3] = src.u.vec4.w;
-          break;
-      }
+        case SensorType::GAME_ROTATION_VECTOR: {
+            dst->data[0] = src.u.vec4.x;
+            dst->data[1] = src.u.vec4.y;
+            dst->data[2] = src.u.vec4.z;
+            dst->data[3] = src.u.vec4.w;
+            break;
+        }
 
-      case SensorType::MAGNETIC_FIELD_UNCALIBRATED:
+        case SensorType::ROTATION_VECTOR:
+        case SensorType::GEOMAGNETIC_ROTATION_VECTOR: {
+            dst->data[0] = src.u.data[0];
+            dst->data[1] = src.u.data[1];
+            dst->data[2] = src.u.data[2];
+            dst->data[3] = src.u.data[3];
+            dst->data[4] = src.u.data[4];
+            break;
+        }
+
+        case SensorType::MAGNETIC_FIELD_UNCALIBRATED:
         case SensorType::GYROSCOPE_UNCALIBRATED:
         case SensorType::ACCELEROMETER_UNCALIBRATED:
         {
@@ -283,35 +277,30 @@
         case SensorType::STATIONARY_DETECT:
         case SensorType::MOTION_DETECT:
         case SensorType::HEART_BEAT:
-        case SensorType::LOW_LATENCY_OFFBODY_DETECT:
-        {
+        case SensorType::LOW_LATENCY_OFFBODY_DETECT: {
             dst->data[0] = src.u.scalar;
             break;
         }
 
-        case SensorType::STEP_COUNTER:
-        {
+        case SensorType::STEP_COUNTER: {
             dst->u64.step_counter = src.u.stepCount;
             break;
         }
 
-        case SensorType::HEART_RATE:
-        {
+        case SensorType::HEART_RATE: {
             dst->heart_rate.bpm = src.u.heartRate.bpm;
             dst->heart_rate.status = (int8_t)src.u.heartRate.status;
             break;
         }
 
-        case SensorType::POSE_6DOF:  // 15 floats
-        {
+        case SensorType::POSE_6DOF: {  // 15 floats
             for (size_t i = 0; i < 15; ++i) {
                 dst->data[i] = src.u.pose6DOF[i];
             }
             break;
         }
 
-        case SensorType::DYNAMIC_SENSOR_META:
-        {
+        case SensorType::DYNAMIC_SENSOR_META: {
             dst->dynamic_sensor_meta.connected = src.u.dynamic.connected;
             dst->dynamic_sensor_meta.handle = src.u.dynamic.sensorHandle;
             dst->dynamic_sensor_meta.sensor = NULL;  // to be filled in later
@@ -323,8 +312,7 @@
             break;
         }
 
-        case SensorType::ADDITIONAL_INFO:
-        {
+        case SensorType::ADDITIONAL_INFO: {
             const ::android::hardware::sensors::V1_0::AdditionalInfo &srcInfo =
                 src.u.additional;
 
@@ -341,8 +329,7 @@
             break;
         }
 
-        default:
-        {
+        default: {
             CHECK_GE((int32_t)src.sensorType,
                      (int32_t)SensorType::DEVICE_PRIVATE_BASE);
 
diff --git a/sensors/1.0/types.hal b/sensors/1.0/types.hal
index 3926e2f..e91820c 100644
--- a/sensors/1.0/types.hal
+++ b/sensors/1.0/types.hal
@@ -1157,8 +1157,7 @@
     Vec3 vec3;
 
     /**
-     * SensorType::ROTATION_VECTOR, SensorType::GAME_ROTATION_VECTOR,
-     * SensorType::GEOMAGNETIC_ROTATION_VECTOR
+     * SensorType::GAME_ROTATION_VECTOR
      */
     Vec4 vec4;
 
@@ -1200,7 +1199,14 @@
     /** SensorType::ADDITIONAL_INFO */
     AdditionalInfo additional;
 
-    /** undefined/custom sensor type >= SensorType::DEVICE_PRIVATE_BASE */
+    /**
+     * The following sensors should use the data field:
+     * - Undefined/custom sensor type >= SensorType::DEVICE_PRIVATE_BASE
+     * - SensorType::ROTATION_VECTOR, SensorType::GEOMAGNETIC_ROTATION_VECTOR:
+     *   - These are Vec4 types with an additional float accuracy field,
+     *     where data[4] is the estimated heading accuracy in radians
+     *     (-1 if unavailable, and invalid if not in the range (0, 2 * pi]).
+     */
     float[16] data;
 };
 
diff --git a/sensors/1.0/vts/functional/Android.bp b/sensors/1.0/vts/functional/Android.bp
index 0ea400e..c58c7fc 100644
--- a/sensors/1.0/vts/functional/Android.bp
+++ b/sensors/1.0/vts/functional/Android.bp
@@ -26,5 +26,6 @@
         "android.hardware.graphics.mapper@2.0",
         "android.hardware.sensors@1.0",
     ],
+    test_suites: ["general-tests"],
 }
 
diff --git a/soundtrigger/2.0/vts/functional/Android.bp b/soundtrigger/2.0/vts/functional/Android.bp
index be6b3a8..f6207c4 100644
--- a/soundtrigger/2.0/vts/functional/Android.bp
+++ b/soundtrigger/2.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalSoundtriggerV2_0TargetTest.cpp"],
     static_libs: ["android.hardware.soundtrigger@2.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/soundtrigger/2.1/vts/functional/Android.bp b/soundtrigger/2.1/vts/functional/Android.bp
index 925a17c..f1eb35d 100644
--- a/soundtrigger/2.1/vts/functional/Android.bp
+++ b/soundtrigger/2.1/vts/functional/Android.bp
@@ -25,4 +25,5 @@
                  "android.hardware.soundtrigger@2.1",
                  "libhidlmemory"
                  ],
+    test_suites: ["general-tests"],
 }
diff --git a/tests/bar/1.0/default/Bar.cpp b/tests/bar/1.0/default/Bar.cpp
index 4614428..0a57b40 100644
--- a/tests/bar/1.0/default/Bar.cpp
+++ b/tests/bar/1.0/default/Bar.cpp
@@ -149,6 +149,10 @@
     return mFoo->closeHandles();
 }
 
+Return<void> Bar::repeatWithFmq(const IFoo::WithFmq& withFmq, repeatWithFmq_cb _hidl_cb) {
+    return mFoo->repeatWithFmq(withFmq, _hidl_cb);
+}
+
 Return<void> Bar::echoNullInterface(const sp<IFooCallback> &cb, echoNullInterface_cb _hidl_cb) {
     return mFoo->echoNullInterface(cb, _hidl_cb);
 }
diff --git a/tests/bar/1.0/default/Bar.h b/tests/bar/1.0/default/Bar.h
index acb976f..4372266 100644
--- a/tests/bar/1.0/default/Bar.h
+++ b/tests/bar/1.0/default/Bar.h
@@ -56,6 +56,8 @@
     virtual Return<void> createMyHandle(createMyHandle_cb _hidl_cb)  override;
     virtual Return<void> createHandles(uint32_t size, createHandles_cb _hidl_cb)  override;
     virtual Return<void> closeHandles()  override;
+    virtual Return<void> repeatWithFmq(const IFoo::WithFmq& withFmq,
+                                       repeatWithFmq_cb _hidl_cb) override;
 
     Return<void> haveAVectorOfInterfaces(
             const hidl_vec<sp<ISimple> > &in,
diff --git a/tests/baz/1.0/IBaz.hal b/tests/baz/1.0/IBaz.hal
index 9a9e754..91ed1f2 100644
--- a/tests/baz/1.0/IBaz.hal
+++ b/tests/baz/1.0/IBaz.hal
@@ -36,6 +36,17 @@
     typedef SomeOtherEnum thisIsAnAlias;
     typedef IBaz anIBazByAnyOtherName;
 
+    struct NastyNester {
+        struct NestersNasty {
+            struct NestersNastyNester {
+                IBaz baz;
+                vec<NestersNasty> nasties;
+            };
+        };
+
+        IBaz baz;
+    };
+
     enum SomeEnum : SomeOtherEnum {
         quux = 33,
         goober = 192,
@@ -68,8 +79,16 @@
         bitfield<BitField> bf;
     };
 
+    struct MyHandle {
+        handle h;
+        int32_t guard;
+    };
+
     struct StructWithInterface {
         int32_t number;
+        int8_t[7] array;
+        string oneString;
+        vec<string> vectorOfStrings;
         IBase dummy;
     };
     oneway doThis(float param);
diff --git a/tests/expression/1.0/IExpression.hal b/tests/expression/1.0/IExpression.hal
index 2db9f61..36aed60 100644
--- a/tests/expression/1.0/IExpression.hal
+++ b/tests/expression/1.0/IExpression.hal
@@ -147,6 +147,28 @@
     logand4 = (0 && 1) == 0,
   };
 
+  // Tests for enum tags
+  enum NoElements : uint32_t {};
+  enum OneElement : uint32_t {A};
+  enum TwoElement : uint32_t {A,B};
+  enum TwoCollidingElements : uint32_t {A=1,B=1};
+  enum ThreeFromInheritance : TwoElement {C};
+  enum ThreeFromDoubleInheritance : ThreeFromInheritance {};
+  enum ThreeCollidingFromInheritance : TwoCollidingElements {C};
+
+  enum EnumTagTest : uint32_t {
+    a = NoElements#len == 0,
+    b = OneElement#len == 1,
+    c = TwoElement#len == 2,
+    d = TwoCollidingElements#len == 2,
+    e = ThreeFromInheritance#len == 3,
+    f = ThreeFromDoubleInheritance#len == 3,
+    g = ThreeCollidingFromInheritance#len == 3,
+
+    // fine to reference current enum as well
+    h = EnumTagTest#len == 8,
+  };
+
   enum Grayscale : int8_t {
     WHITE = 126,
     GRAY, // 127
diff --git a/tests/foo/1.0/IFoo.hal b/tests/foo/1.0/IFoo.hal
index 4a930a2..4c54427 100644
--- a/tests/foo/1.0/IFoo.hal
+++ b/tests/foo/1.0/IFoo.hal
@@ -103,7 +103,6 @@
         union U {
             int8_t number;
             int8_t[1][2] multidimArray;
-            pointer p;
             Fumble anotherStruct;
             bitfield<BitField> bf;
         } u;
@@ -122,6 +121,17 @@
         bitfield<BitField> bf;
     };
 
+    struct WithFmq {
+        struct ScatterGather {
+            fmq_sync<uint8_t> descSync;
+        } scatterGathered;
+
+        struct ContainsPointer {
+            fmq_sync<uint8_t> descSync;
+            interface foo;
+        } containsPointer;
+    };
+
     enum Discriminator : uint8_t {
         BOOL,
         INT,
@@ -205,4 +215,6 @@
     createMyHandle() generates (MyHandle h);
     createHandles(uint32_t size) generates (vec<handle> handles);
     closeHandles();
+
+    repeatWithFmq(WithFmq withFmq) generates (WithFmq withFmq);
 };
diff --git a/tests/foo/1.0/default/Foo.cpp b/tests/foo/1.0/default/Foo.cpp
index a31ab9f..461568b 100644
--- a/tests/foo/1.0/default/Foo.cpp
+++ b/tests/foo/1.0/default/Foo.cpp
@@ -379,6 +379,11 @@
     return Void();
 }
 
+Return<void> Foo::repeatWithFmq(const IFoo::WithFmq& withFmq, repeatWithFmq_cb _hidl_cb) {
+    _hidl_cb(withFmq);
+    return Void();
+}
+
 IFoo* HIDL_FETCH_IFoo(const char* /* name */) {
     return new Foo();
 }
diff --git a/tests/foo/1.0/default/Foo.h b/tests/foo/1.0/default/Foo.h
index 7dd672b..d73179a 100644
--- a/tests/foo/1.0/default/Foo.h
+++ b/tests/foo/1.0/default/Foo.h
@@ -53,6 +53,8 @@
     virtual Return<void> createMyHandle(createMyHandle_cb _hidl_cb)  override;
     virtual Return<void> createHandles(uint32_t size, createHandles_cb _hidl_cb)  override;
     virtual Return<void> closeHandles()  override;
+    virtual Return<void> repeatWithFmq(const IFoo::WithFmq& withFmq,
+                                       repeatWithFmq_cb _hidl_cb) override;
 
     Return<void> haveAVectorOfInterfaces(
             const hidl_vec<sp<ISimple> > &in,
@@ -63,6 +65,7 @@
             haveAVectorOfGenericInterfaces_cb _hidl_cb) override;
 
     Return<void> echoNullInterface(const sp<IFooCallback> &cb, echoNullInterface_cb _hidl_cb) override;
+
 private:
     std::vector<::native_handle_t *> mHandles;
 };
diff --git a/tests/msgq/1.0/ITestMsgQ.hal b/tests/msgq/1.0/ITestMsgQ.hal
index 350e26d..112270a 100644
--- a/tests/msgq/1.0/ITestMsgQ.hal
+++ b/tests/msgq/1.0/ITestMsgQ.hal
@@ -24,14 +24,14 @@
 
     /**
      * This method requests the service to set up a synchronous read/write
-     * wait-free FMQ with the client as reader.
+     * wait-free FMQ using the input descriptor with the client as reader.
+     *
+     * @param mqDesc This structure describes the FMQ that was set up by the
+     * client. Server uses this descriptor to set up a FMQ object at its end.
      *
      * @return ret True if the setup is successful.
-     * @return mqDesc This structure describes the FMQ that was
-     * set up by the service. Client can use it to set up the FMQ at its end.
      */
-    configureFmqSyncReadWrite()
-        generates(bool ret, fmq_sync<uint16_t> mqDesc);
+    configureFmqSyncReadWrite(fmq_sync<uint16_t> mqDesc) generates(bool ret);
 
     /**
      * This method requests the service to return an MQDescriptor to
diff --git a/tests/msgq/1.0/default/Android.bp b/tests/msgq/1.0/default/Android.bp
index 6bbca24..6c8be6c 100644
--- a/tests/msgq/1.0/default/Android.bp
+++ b/tests/msgq/1.0/default/Android.bp
@@ -54,6 +54,7 @@
         "libutils",
         "android.hardware.tests.msgq@1.0"
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -80,4 +81,5 @@
     // libs should be used on device.
     static_libs: ["android.hardware.tests.msgq@1.0"],
     whole_static_libs: ["android.hardware.tests.msgq@1.0-impl"],
+    test_suites: ["general-tests"],
 }
diff --git a/tests/msgq/1.0/default/TestMsgQ.cpp b/tests/msgq/1.0/default/TestMsgQ.cpp
index 6fd4fc6..ba665c9 100644
--- a/tests/msgq/1.0/default/TestMsgQ.cpp
+++ b/tests/msgq/1.0/default/TestMsgQ.cpp
@@ -24,24 +24,21 @@
 namespace implementation {
 
 // Methods from ::android::hardware::tests::msgq::V1_0::ITestMsgQ follow.
-Return<void> TestMsgQ::configureFmqSyncReadWrite(configureFmqSyncReadWrite_cb _hidl_cb) {
-    static constexpr size_t kNumElementsInQueue = 1024;
-    mFmqSynchronized.reset(new (std::nothrow) MessageQueueSync(
-            kNumElementsInQueue, true /* configureEventFlagWord */));
+Return<bool> TestMsgQ::configureFmqSyncReadWrite(
+    const android::hardware::MQDescriptorSync<uint16_t>& mqDesc) {
+    mFmqSynchronized.reset(new (std::nothrow) MessageQueueSync(mqDesc));
     if ((mFmqSynchronized == nullptr) || (mFmqSynchronized->isValid() == false)) {
-        _hidl_cb(false /* ret */, MessageQueueSync::Descriptor());
-    } else {
-        /*
-         * Initialize the EventFlag word with bit FMQ_NOT_FULL.
-         */
-        auto evFlagWordPtr = mFmqSynchronized->getEventFlagWord();
-        if (evFlagWordPtr != nullptr) {
-            std::atomic_init(evFlagWordPtr,
-                             static_cast<uint32_t>(ITestMsgQ::EventFlagBits::FMQ_NOT_FULL));
-        }
-        _hidl_cb(true /* ret */, *mFmqSynchronized->getDesc());
+        return false;
     }
-    return Void();
+    /*
+     * Initialize the EventFlag word with bit FMQ_NOT_FULL.
+     */
+    auto evFlagWordPtr = mFmqSynchronized->getEventFlagWord();
+    if (evFlagWordPtr != nullptr) {
+        std::atomic_init(evFlagWordPtr,
+                         static_cast<uint32_t>(ITestMsgQ::EventFlagBits::FMQ_NOT_FULL));
+    }
+    return true;
 }
 
 Return<void> TestMsgQ::getFmqUnsyncWrite(bool configureFmq, getFmqUnsyncWrite_cb _hidl_cb) {
diff --git a/tests/msgq/1.0/default/TestMsgQ.h b/tests/msgq/1.0/default/TestMsgQ.h
index 86e4ac4..f9fcddd 100644
--- a/tests/msgq/1.0/default/TestMsgQ.h
+++ b/tests/msgq/1.0/default/TestMsgQ.h
@@ -55,7 +55,7 @@
     TestMsgQ() : mFmqSynchronized(nullptr), mFmqUnsynchronized(nullptr) {}
 
     // Methods from ::android::hardware::tests::msgq::V1_0::ITestMsgQ follow.
-    Return<void> configureFmqSyncReadWrite(configureFmqSyncReadWrite_cb _hidl_cb) override;
+    Return<bool> configureFmqSyncReadWrite(const MQDescriptorSync<uint16_t>& mqDesc) override;
     Return<void> getFmqUnsyncWrite(bool configureFmq, getFmqUnsyncWrite_cb _hidl_cb) override;
     Return<bool> requestWriteFmqSync(int32_t count) override;
     Return<bool> requestReadFmqSync(int32_t count) override;
diff --git a/tests/safeunion/1.0/.hidl_for_test b/tests/safeunion/1.0/.hidl_for_test
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tests/safeunion/1.0/.hidl_for_test
diff --git a/tests/safeunion/1.0/Android.bp b/tests/safeunion/1.0/Android.bp
new file mode 100644
index 0000000..87edd53
--- /dev/null
+++ b/tests/safeunion/1.0/Android.bp
@@ -0,0 +1,16 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.tests.safeunion@1.0",
+    root: "android.hardware",
+    srcs: [
+        "IOtherInterface.hal",
+        "ISafeUnion.hal",
+    ],
+    interfaces: [
+        "android.hidl.base@1.0",
+        "android.hidl.safe_union@1.0",
+    ],
+    gen_java: true,
+}
+
diff --git a/tests/safeunion/1.0/IOtherInterface.hal b/tests/safeunion/1.0/IOtherInterface.hal
new file mode 100644
index 0000000..cdaf847
--- /dev/null
+++ b/tests/safeunion/1.0/IOtherInterface.hal
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.tests.safeunion@1.0;
+
+interface IOtherInterface {
+    concatTwoStrings(string a, string b) generates (string result);
+};
diff --git a/tests/safeunion/1.0/ISafeUnion.hal b/tests/safeunion/1.0/ISafeUnion.hal
new file mode 100644
index 0000000..58c08c6
--- /dev/null
+++ b/tests/safeunion/1.0/ISafeUnion.hal
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.tests.safeunion@1.0;
+
+import IOtherInterface;
+
+import android.hidl.safe_union@1.0::Monostate;
+
+interface ISafeUnion {
+
+    enum BitField : uint8_t {
+        V0 = 1 << 0,
+        V1 = 1 << 1,
+        V2 = 1 << 2,
+        V3 = 1 << 3,
+    };
+
+    struct J {
+        vec<uint32_t> j1;
+        uint8_t[65] j2;
+        string j3;
+    };
+
+    safe_union SmallSafeUnion {
+        Monostate noinit;
+
+        uint8_t a;
+    };
+
+    safe_union LargeSafeUnion {
+        Monostate noinit;
+
+        int8_t a;
+        uint16_t b;
+        int32_t c;
+        uint64_t d;
+
+        int8_t[13] e;
+        int64_t[5] f;
+
+        string g;
+        vec<bool> h;
+        vec<uint64_t> i;
+
+        J j;
+        struct K {
+            uint8_t k1;
+            uint64_t k2;
+        } k;
+
+        SmallSafeUnion l;
+
+        BitField m;
+        bitfield<BitField> n;
+    };
+
+    safe_union InterfaceTypeSafeUnion {
+        Monostate noinit;
+
+        uint32_t a;
+        int8_t[7] b;
+        IOtherInterface c;
+        string d;
+        vec<string> e;
+        handle f;
+        vec<handle> g;
+    };
+
+    safe_union HandleTypeSafeUnion {
+        Monostate noinit;
+
+        handle a;
+        handle[5] b;
+        vec<handle> c;
+    };
+
+    newLargeSafeUnion() generates (LargeSafeUnion myUnion);
+    setA(LargeSafeUnion myUnion, int8_t a) generates (LargeSafeUnion myUnion);
+    setB(LargeSafeUnion myUnion, uint16_t b) generates (LargeSafeUnion myUnion);
+    setC(LargeSafeUnion myUnion, int32_t c) generates (LargeSafeUnion myUnion);
+    setD(LargeSafeUnion myUnion, uint64_t d) generates (LargeSafeUnion myUnion);
+    setE(LargeSafeUnion myUnion, int8_t[13] e) generates (LargeSafeUnion myUnion);
+    setF(LargeSafeUnion myUnion, int64_t[5] f) generates (LargeSafeUnion myUnion);
+    setG(LargeSafeUnion myUnion, string g) generates (LargeSafeUnion myUnion);
+    setH(LargeSafeUnion myUnion, vec<bool> h) generates (LargeSafeUnion myUnion);
+    setI(LargeSafeUnion myUnion, vec<uint64_t> i) generates (LargeSafeUnion myUnion);
+    setJ(LargeSafeUnion myUnion, J j) generates (LargeSafeUnion myUnion);
+    setK(LargeSafeUnion myUnion, LargeSafeUnion.K k) generates (LargeSafeUnion myUnion);
+    setL(LargeSafeUnion myUnion, SmallSafeUnion l) generates (LargeSafeUnion myUnion);
+    setM(LargeSafeUnion myUnion, BitField m) generates (LargeSafeUnion myUnion);
+    setN(LargeSafeUnion myUnion, bitfield<BitField> m) generates (LargeSafeUnion myUnion);
+
+    newInterfaceTypeSafeUnion() generates (InterfaceTypeSafeUnion myUnion);
+    setInterfaceA(InterfaceTypeSafeUnion myUnion, uint32_t a) generates (InterfaceTypeSafeUnion myUnion);
+    setInterfaceB(InterfaceTypeSafeUnion myUnion, int8_t[7] b) generates (InterfaceTypeSafeUnion myUnion);
+    setInterfaceC(InterfaceTypeSafeUnion myUnion, IOtherInterface c) generates (InterfaceTypeSafeUnion myUnion);
+    setInterfaceD(InterfaceTypeSafeUnion myUnion, string d) generates (InterfaceTypeSafeUnion myUnion);
+    setInterfaceE(InterfaceTypeSafeUnion myUnion, vec<string> e) generates (InterfaceTypeSafeUnion myUnion);
+    setInterfaceF(InterfaceTypeSafeUnion myUnion, handle f) generates (InterfaceTypeSafeUnion myUnion);
+    setInterfaceG(InterfaceTypeSafeUnion myUnion, vec<handle> g) generates (InterfaceTypeSafeUnion myUnion);
+
+    newHandleTypeSafeUnion() generates (HandleTypeSafeUnion myUnion);
+    setHandleA(HandleTypeSafeUnion myUnion, handle a) generates (HandleTypeSafeUnion myUnion);
+    setHandleB(HandleTypeSafeUnion myUnion, handle[5] b) generates (HandleTypeSafeUnion myUnion);
+    setHandleC(HandleTypeSafeUnion myUnion, vec<handle> c) generates (HandleTypeSafeUnion myUnion);
+};
diff --git a/tests/safeunion/1.0/default/Android.bp b/tests/safeunion/1.0/default/Android.bp
new file mode 100644
index 0000000..fc2443e
--- /dev/null
+++ b/tests/safeunion/1.0/default/Android.bp
@@ -0,0 +1,21 @@
+cc_library {
+    name: "android.hardware.tests.safeunion@1.0-impl",
+    defaults: ["hidl_defaults"],
+    relative_install_path: "hw",
+    srcs: [
+        "SafeUnion.cpp",
+    ],
+    shared_libs: [
+        "libbase",
+        "libcutils",
+        "libhidlbase",
+        "libhidltransport",
+        "libhwbinder",
+        "liblog",
+        "libutils",
+    ],
+
+    // These are static libs only for testing purposes and portability. Shared
+    // libs should be used on device.
+    static_libs: ["android.hardware.tests.safeunion@1.0"],
+}
diff --git a/tests/safeunion/1.0/default/SafeUnion.cpp b/tests/safeunion/1.0/default/SafeUnion.cpp
new file mode 100644
index 0000000..4fb0974
--- /dev/null
+++ b/tests/safeunion/1.0/default/SafeUnion.cpp
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SafeUnion.h"
+#include <android-base/logging.h>
+
+namespace android {
+namespace hardware {
+namespace tests {
+namespace safeunion {
+namespace V1_0 {
+namespace implementation {
+
+// Methods from ::android::hardware::tests::safeunion::V1_0::ISafeUnion follow.
+Return<void> SafeUnion::newLargeSafeUnion(newLargeSafeUnion_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) newLargeSafeUnion()";
+
+    LargeSafeUnion ret;
+    _hidl_cb(ret);
+    return Void();
+}
+
+Return<void> SafeUnion::setA(const LargeSafeUnion& myUnion, int8_t a, setA_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setA(myUnion, " << a << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.a(a);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setB(const LargeSafeUnion& myUnion, uint16_t b, setB_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setB(myUnion, " << b << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.b(b);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setC(const LargeSafeUnion& myUnion, int32_t c, setC_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setC(myUnion, " << c << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.c(c);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setD(const LargeSafeUnion& myUnion, uint64_t d, setD_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setD(myUnion, " << d << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.d(d);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setE(const LargeSafeUnion& myUnion, const hidl_array<int8_t, 13>& e, setE_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setE(myUnion, " << toString(e) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.e(e);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setF(const LargeSafeUnion& myUnion, const hidl_array<int64_t, 5>& f, setF_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setF(myUnion, " << toString(f) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.f(f);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setG(const LargeSafeUnion& myUnion, const hidl_string& g, setG_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setG(myUnion, " << toString(g) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.g(g);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setH(const LargeSafeUnion& myUnion, const hidl_vec<bool>& h, setH_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setH(myUnion, " << toString(h) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.h(h);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setI(const LargeSafeUnion& myUnion, const hidl_vec<uint64_t>& i, setI_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setI(myUnion, " << toString(i) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.i(i);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setJ(const LargeSafeUnion& myUnion, const J& j, setJ_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setJ(myUnion, " << toString(j) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.j(j);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setK(const LargeSafeUnion& myUnion, const LargeSafeUnion::K& k, setK_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setK(myUnion, " << toString(k) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.k(k);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setL(const LargeSafeUnion& myUnion, const SmallSafeUnion& l, setL_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setL(myUnion, " << toString(l) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.l(l);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setM(const LargeSafeUnion& myUnion, BitField m, setL_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setM(myUnion, " << toString(m) << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.m(m);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setN(const LargeSafeUnion& myUnion, hidl_bitfield<BitField> n,
+                             setL_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setN(myUnion, " << n << ")";
+
+    LargeSafeUnion myNewUnion = myUnion;
+    myNewUnion.n(n);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::newInterfaceTypeSafeUnion(newInterfaceTypeSafeUnion_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) newInterfaceTypeSafeUnion()";
+
+    InterfaceTypeSafeUnion ret;
+    _hidl_cb(ret);
+    return Void();
+}
+
+Return<void> SafeUnion::setInterfaceA(const InterfaceTypeSafeUnion& myUnion, uint32_t a, setInterfaceA_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setInterfaceA(myUnion, " << a << ")";
+
+    InterfaceTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.a(a);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setInterfaceB(const InterfaceTypeSafeUnion& myUnion, const hidl_array<int8_t, 7>& b, setInterfaceB_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setInterfaceB(myUnion, " << toString(b) << ")";
+
+    InterfaceTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.b(b);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setInterfaceC(const InterfaceTypeSafeUnion& myUnion, const sp<::android::hardware::tests::safeunion::V1_0::IOtherInterface>& c, setInterfaceC_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setInterfaceC(myUnion, " << toString(c) << ")";
+
+    InterfaceTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.c(c);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setInterfaceD(const InterfaceTypeSafeUnion& myUnion, const hidl_string& d,
+                                      setInterfaceD_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setInterfaceD(myUnion, " << toString(d) << ")";
+
+    InterfaceTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.d(d);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setInterfaceE(const InterfaceTypeSafeUnion& myUnion,
+                                      const hidl_vec<hidl_string>& e, setInterfaceE_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setInterfaceE(myUnion, " << toString(e) << ")";
+
+    InterfaceTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.e(e);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setInterfaceF(const InterfaceTypeSafeUnion& myUnion, const hidl_handle& f,
+                                      setInterfaceF_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setInterfaceF(myUnion, " << toString(f) << ")";
+
+    InterfaceTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.f(f);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setInterfaceG(const InterfaceTypeSafeUnion& myUnion,
+                                      const hidl_vec<hidl_handle>& g, setInterfaceG_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setInterfaceG(myUnion, " << toString(g) << ")";
+
+    InterfaceTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.g(g);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::newHandleTypeSafeUnion(newHandleTypeSafeUnion_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) newHandleTypeSafeUnion()";
+
+    HandleTypeSafeUnion ret;
+    _hidl_cb(ret);
+    return Void();
+}
+
+Return<void> SafeUnion::setHandleA(
+    const ::android::hardware::tests::safeunion::V1_0::ISafeUnion::HandleTypeSafeUnion& myUnion,
+    const hidl_handle& a, setHandleA_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setHandleA(myUnion, " << toString(a) << ")";
+
+    HandleTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.a(a);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setHandleB(const HandleTypeSafeUnion& myUnion,
+                                   const hidl_array<hidl_handle, 5>& b, setHandleB_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setHandleB(myUnion, " << toString(b) << ")";
+
+    HandleTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.b(b);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+Return<void> SafeUnion::setHandleC(const HandleTypeSafeUnion& myUnion,
+                                   const hidl_vec<hidl_handle>& c, setHandleC_cb _hidl_cb) {
+    LOG(INFO) << "SERVER(SafeUnion) setHandleC(myUnion, " << toString(c) << ")";
+
+    HandleTypeSafeUnion myNewUnion = myUnion;
+    myNewUnion.c(c);
+
+    _hidl_cb(myNewUnion);
+    return Void();
+}
+
+ISafeUnion* HIDL_FETCH_ISafeUnion(const char* /* name */) {
+    return new SafeUnion();
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace safeunion
+}  // namespace tests
+}  // namespace hardware
+}  // namespace android
diff --git a/tests/safeunion/1.0/default/SafeUnion.h b/tests/safeunion/1.0/default/SafeUnion.h
new file mode 100644
index 0000000..ee3a954
--- /dev/null
+++ b/tests/safeunion/1.0/default/SafeUnion.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_TESTS_SAFEUNION_V1_0_SAFEUNION_H
+#define ANDROID_HARDWARE_TESTS_SAFEUNION_V1_0_SAFEUNION_H
+
+#include <android/hardware/tests/safeunion/1.0/ISafeUnion.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace tests {
+namespace safeunion {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::hardware::tests::safeunion::V1_0::ISafeUnion;
+
+struct SafeUnion : public ISafeUnion {
+    // Methods from ::android::hardware::tests::safeunion::V1_0::ISafeUnion follow.
+    Return<void> newLargeSafeUnion(newLargeSafeUnion_cb _hidl_cb) override;
+    Return<void> setA(const LargeSafeUnion& myUnion, int8_t a, setA_cb _hidl_cb) override;
+    Return<void> setB(const LargeSafeUnion& myUnion, uint16_t b, setB_cb _hidl_cb) override;
+    Return<void> setC(const LargeSafeUnion& myUnion, int32_t c, setC_cb _hidl_cb) override;
+    Return<void> setD(const LargeSafeUnion& myUnion, uint64_t d, setD_cb _hidl_cb) override;
+    Return<void> setE(const LargeSafeUnion& myUnion, const hidl_array<int8_t, 13>& e, setE_cb _hidl_cb) override;
+    Return<void> setF(const LargeSafeUnion& myUnion, const hidl_array<int64_t, 5>& f, setF_cb _hidl_cb) override;
+    Return<void> setG(const LargeSafeUnion& myUnion, const hidl_string& g, setG_cb _hidl_cb) override;
+    Return<void> setH(const LargeSafeUnion& myUnion, const hidl_vec<bool>& h, setH_cb _hidl_cb) override;
+    Return<void> setI(const LargeSafeUnion& myUnion, const hidl_vec<uint64_t>& i, setI_cb _hidl_cb) override;
+    Return<void> setJ(const LargeSafeUnion& myUnion, const J& j, setJ_cb _hidl_cb) override;
+    Return<void> setK(const LargeSafeUnion& myUnion, const LargeSafeUnion::K& k, setK_cb _hidl_cb) override;
+    Return<void> setL(const LargeSafeUnion& myUnion, const SmallSafeUnion& l, setL_cb _hidl_cb) override;
+    Return<void> setM(const LargeSafeUnion& myUnion, BitField m, setL_cb _hidl_cb) override;
+    Return<void> setN(const LargeSafeUnion& myUnion, hidl_bitfield<BitField> n,
+                      setL_cb _hidl_cb) override;
+
+    Return<void> newInterfaceTypeSafeUnion(newInterfaceTypeSafeUnion_cb _hidl_cb) override;
+    Return<void> setInterfaceA(const InterfaceTypeSafeUnion& myUnion, uint32_t a, setInterfaceA_cb _hidl_cb) override;
+    Return<void> setInterfaceB(const InterfaceTypeSafeUnion& myUnion, const hidl_array<int8_t, 7>& b, setInterfaceB_cb _hidl_cb) override;
+    Return<void> setInterfaceC(const InterfaceTypeSafeUnion& myUnion, const sp<::android::hardware::tests::safeunion::V1_0::IOtherInterface>& c, setInterfaceC_cb _hidl_cb) override;
+    Return<void> setInterfaceD(const InterfaceTypeSafeUnion& myUnion, const hidl_string& d, setInterfaceD_cb _hidl_cb) override;
+    Return<void> setInterfaceE(const InterfaceTypeSafeUnion& myUnion, const hidl_vec<hidl_string>& e, setInterfaceE_cb _hidl_cb) override;
+    Return<void> setInterfaceF(const InterfaceTypeSafeUnion& myUnion, const hidl_handle& f,
+                               setInterfaceF_cb _hidl_cb) override;
+    Return<void> setInterfaceG(const InterfaceTypeSafeUnion& myUnion,
+                               const hidl_vec<hidl_handle>& g, setInterfaceG_cb _hidl_cb) override;
+
+    Return<void> newHandleTypeSafeUnion(newHandleTypeSafeUnion_cb _hidl_cb) override;
+    Return<void> setHandleA(const HandleTypeSafeUnion& myUnion, const hidl_handle& a,
+                            setHandleA_cb _hidl_cb) override;
+    Return<void> setHandleB(const HandleTypeSafeUnion& myUnion, const hidl_array<hidl_handle, 5>& b,
+                            setHandleB_cb _hidl_cb) override;
+    Return<void> setHandleC(const HandleTypeSafeUnion& myUnion, const hidl_vec<hidl_handle>& c,
+                            setHandleC_cb _hidl_cb) override;
+};
+
+extern "C" ISafeUnion* HIDL_FETCH_ISafeUnion(const char* name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace safeunion
+}  // namespace tests
+}  // namespace hardware
+}  // namespace android
+
+#endif  // ANDROID_HARDWARE_TESTS_SAFEUNION_V1_0_SAFEUNION_H
diff --git a/tests/safeunion/cpp/1.0/.hidl_for_test b/tests/safeunion/cpp/1.0/.hidl_for_test
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tests/safeunion/cpp/1.0/.hidl_for_test
diff --git a/tests/safeunion/cpp/1.0/Android.bp b/tests/safeunion/cpp/1.0/Android.bp
new file mode 100644
index 0000000..1111719
--- /dev/null
+++ b/tests/safeunion/cpp/1.0/Android.bp
@@ -0,0 +1,14 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.tests.safeunion.cpp@1.0",
+    root: "android.hardware",
+    srcs: [
+        "ICppSafeUnion.hal",
+    ],
+    interfaces: [
+        "android.hidl.base@1.0",
+    ],
+    gen_java: false,
+}
+
diff --git a/tests/safeunion/cpp/1.0/ICppSafeUnion.hal b/tests/safeunion/cpp/1.0/ICppSafeUnion.hal
new file mode 100644
index 0000000..cc1a91e
--- /dev/null
+++ b/tests/safeunion/cpp/1.0/ICppSafeUnion.hal
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.tests.safeunion.cpp@1.0;
+
+/**
+ * Safe union for cpp-only types.
+ */
+interface ICppSafeUnion {
+    safe_union PointerFmqSafeUnion {
+        interface iface;
+        fmq_sync<uint8_t> fmqSync;
+        fmq_unsync<uint8_t> fmqUnsync;
+    };
+    safe_union FmqSafeUnion {
+        fmq_sync<uint8_t> fmqSync;
+        fmq_unsync<uint8_t> fmqUnsync;
+    };
+
+    repeatPointerFmqSafeUnion(PointerFmqSafeUnion fmq) generates (PointerFmqSafeUnion fmq);
+    repeatFmqSafeUnion(FmqSafeUnion fmq) generates (FmqSafeUnion fmq);
+};
diff --git a/tests/safeunion/cpp/1.0/default/Android.bp b/tests/safeunion/cpp/1.0/default/Android.bp
new file mode 100644
index 0000000..210a639
--- /dev/null
+++ b/tests/safeunion/cpp/1.0/default/Android.bp
@@ -0,0 +1,22 @@
+cc_library {
+    name: "android.hardware.tests.safeunion.cpp@1.0-impl",
+    relative_install_path: "hw",
+    srcs: [
+        "CppSafeUnion.cpp",
+    ],
+    shared_libs: [
+        "libbase",
+        "libcutils",
+        "libhidlbase",
+        "libhidltransport",
+        "libhwbinder",
+        "liblog",
+        "libutils",
+    ],
+
+    // These are static libs only for testing purposes and portability. Shared
+    // libs should be used on device.
+    static_libs: [
+        "android.hardware.tests.safeunion.cpp@1.0",
+    ],
+}
diff --git a/tests/safeunion/cpp/1.0/default/CppSafeUnion.cpp b/tests/safeunion/cpp/1.0/default/CppSafeUnion.cpp
new file mode 100644
index 0000000..dcbd9d7
--- /dev/null
+++ b/tests/safeunion/cpp/1.0/default/CppSafeUnion.cpp
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "CppSafeUnion.h"
+
+namespace android {
+namespace hardware {
+namespace tests {
+namespace safeunion {
+namespace cpp {
+namespace V1_0 {
+namespace implementation {
+
+Return<void> CppSafeUnion::repeatPointerFmqSafeUnion(const ICppSafeUnion::PointerFmqSafeUnion& fmq,
+                                                     repeatPointerFmqSafeUnion_cb _hidl_cb) {
+    _hidl_cb(fmq);
+    return Void();
+}
+
+Return<void> CppSafeUnion::repeatFmqSafeUnion(const ICppSafeUnion::FmqSafeUnion& fmq,
+                                              repeatFmqSafeUnion_cb _hidl_cb) {
+    _hidl_cb(fmq);
+    return Void();
+}
+
+ICppSafeUnion* HIDL_FETCH_ICppSafeUnion(const char* /* name */) {
+    return new CppSafeUnion();
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace cpp
+}  // namespace safeunion
+}  // namespace tests
+}  // namespace hardware
+}  // namespace android
diff --git a/tests/safeunion/cpp/1.0/default/CppSafeUnion.h b/tests/safeunion/cpp/1.0/default/CppSafeUnion.h
new file mode 100644
index 0000000..a128273
--- /dev/null
+++ b/tests/safeunion/cpp/1.0/default/CppSafeUnion.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <android/hardware/tests/safeunion/cpp/1.0/ICppSafeUnion.h>
+#include <hidl/MQDescriptor.h>
+#include <hidl/Status.h>
+
+namespace android {
+namespace hardware {
+namespace tests {
+namespace safeunion {
+namespace cpp {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::sp;
+using ::android::hardware::hidl_array;
+using ::android::hardware::hidl_memory;
+using ::android::hardware::hidl_string;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+
+struct CppSafeUnion : public ICppSafeUnion {
+    Return<void> repeatPointerFmqSafeUnion(const ICppSafeUnion::PointerFmqSafeUnion& fmq,
+                                           repeatPointerFmqSafeUnion_cb _hidl_cb) override;
+    Return<void> repeatFmqSafeUnion(const ICppSafeUnion::FmqSafeUnion& fmq,
+                                    repeatFmqSafeUnion_cb _hidl_cb) override;
+};
+
+extern "C" ICppSafeUnion* HIDL_FETCH_ICppSafeUnion(const char* name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace cpp
+}  // namespace safeunion
+}  // namespace tests
+}  // namespace hardware
+}  // namespace android
diff --git a/tetheroffload/config/1.0/Android.bp b/tetheroffload/config/1.0/Android.bp
index 9d0dc5f..f20d77c 100644
--- a/tetheroffload/config/1.0/Android.bp
+++ b/tetheroffload/config/1.0/Android.bp
@@ -12,6 +12,6 @@
     interfaces: [
         "android.hidl.base@1.0",
     ],
-    gen_java: false,
+    gen_java: true,
 }
 
diff --git a/tetheroffload/config/1.0/vts/functional/Android.bp b/tetheroffload/config/1.0/vts/functional/Android.bp
index dc95eaa..52b9810 100644
--- a/tetheroffload/config/1.0/vts/functional/Android.bp
+++ b/tetheroffload/config/1.0/vts/functional/Android.bp
@@ -17,4 +17,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalTetheroffloadConfigV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.tetheroffload.config@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/tetheroffload/control/1.0/vts/functional/Android.bp b/tetheroffload/control/1.0/vts/functional/Android.bp
index c6216a2..e8e1414 100644
--- a/tetheroffload/control/1.0/vts/functional/Android.bp
+++ b/tetheroffload/control/1.0/vts/functional/Android.bp
@@ -20,4 +20,5 @@
         "android.hardware.tetheroffload.config@1.0",
         "android.hardware.tetheroffload.control@1.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/thermal/1.0/vts/functional/Android.bp b/thermal/1.0/vts/functional/Android.bp
index f661f1e..6bda558 100644
--- a/thermal/1.0/vts/functional/Android.bp
+++ b/thermal/1.0/vts/functional/Android.bp
@@ -19,5 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalThermalV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.thermal@1.0"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/thermal/1.1/vts/functional/Android.bp b/thermal/1.1/vts/functional/Android.bp
index f5f01fa..9a16c30 100644
--- a/thermal/1.1/vts/functional/Android.bp
+++ b/thermal/1.1/vts/functional/Android.bp
@@ -22,5 +22,6 @@
         "android.hardware.thermal@1.0",
         "android.hardware.thermal@1.1",
     ],
+    test_suites: ["general-tests"],
 }
 
diff --git a/tv/input/1.0/vts/functional/Android.bp b/tv/input/1.0/vts/functional/Android.bp
index 978830c..29181b0 100644
--- a/tv/input/1.0/vts/functional/Android.bp
+++ b/tv/input/1.0/vts/functional/Android.bp
@@ -19,5 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalTvInputV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.tv.input@1.0"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/update-makefiles.sh b/update-makefiles.sh
index b7e4235..14c5b01 100755
--- a/update-makefiles.sh
+++ b/update-makefiles.sh
@@ -1,4 +1,12 @@
 #!/bin/bash
+# Script to update Android make-files for HAL and VTS modules.
+
+set -e
+
+if [ -z "$ANDROID_BUILD_TOP" ]; then
+    echo "Missing ANDROID_BUILD_TOP env variable. Run 'lunch' first."
+    exit 1
+fi
 
 source $ANDROID_BUILD_TOP/system/tools/hidl/update-makefiles-helper.sh
 
@@ -6,3 +14,8 @@
   "android.hardware:hardware/interfaces" \
   "android.hidl:system/libhidl/transport"
 
+echo "Updating files at $ANDROID_BUILD_TOP/test/vts-testcase/hal"
+pushd $ANDROID_BUILD_TOP/test/vts-testcase/hal
+./script/update_makefiles.py
+popd
+
diff --git a/usb/1.0/vts/functional/Android.bp b/usb/1.0/vts/functional/Android.bp
index 96d3c0e..683ee17 100644
--- a/usb/1.0/vts/functional/Android.bp
+++ b/usb/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalUsbV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.usb@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/usb/1.1/types.hal b/usb/1.1/types.hal
index 2261e09..c9cc292 100644
--- a/usb/1.1/types.hal
+++ b/usb/1.1/types.hal
@@ -18,6 +18,8 @@
 
 import android.hardware.usb@1.0;
 
+// NOTE: suffix '_1_1' is for legacy ABI compatibility. It cannot be
+// changed to 'PortMode' which the convention dictates.
 @export
 enum PortMode_1_1 : PortMode {
     /*
@@ -37,6 +39,8 @@
  * Used as the container to report data back to the caller.
  * Represents the current connection status of a single USB port.
  */
+// NOTE: suffix '_1_1' is for legacy ABI compatibility. It cannot be
+// changed to 'PortStatus' which the convention dictates.
 struct PortStatus_1_1 {
     /*
      * The supportedModes and the currentMode fields of the status
diff --git a/usb/1.1/vts/functional/Android.bp b/usb/1.1/vts/functional/Android.bp
index 4bb3203..1f0972f 100644
--- a/usb/1.1/vts/functional/Android.bp
+++ b/usb/1.1/vts/functional/Android.bp
@@ -22,5 +22,6 @@
         "android.hardware.usb@1.0",
         "android.hardware.usb@1.1",
     ],
+    test_suites: ["general-tests"],
 }
 
diff --git a/vibrator/1.0/vts/functional/Android.bp b/vibrator/1.0/vts/functional/Android.bp
index 016d627..391d3d4 100644
--- a/vibrator/1.0/vts/functional/Android.bp
+++ b/vibrator/1.0/vts/functional/Android.bp
@@ -19,5 +19,6 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalVibratorV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.vibrator@1.0"],
+    test_suites: ["general-tests"],
 }
 
diff --git a/vibrator/1.1/types.hal b/vibrator/1.1/types.hal
index f7a619a..72deb4a 100644
--- a/vibrator/1.1/types.hal
+++ b/vibrator/1.1/types.hal
@@ -18,6 +18,8 @@
 
 import @1.0::Effect;
 
+// NOTE: suffix '_1_1' is for legacy ABI compatibility. It cannot be
+// changed to 'Effect' which the convention dictates.
 @export
 enum Effect_1_1 : @1.0::Effect {
     /**
diff --git a/vibrator/1.1/vts/functional/Android.bp b/vibrator/1.1/vts/functional/Android.bp
index 4f6454b..c65ff41 100644
--- a/vibrator/1.1/vts/functional/Android.bp
+++ b/vibrator/1.1/vts/functional/Android.bp
@@ -22,5 +22,6 @@
         "android.hardware.vibrator@1.0",
         "android.hardware.vibrator@1.1",
     ],
+    test_suites: ["general-tests"],
 }
 
diff --git a/vibrator/1.2/vts/functional/Android.bp b/vibrator/1.2/vts/functional/Android.bp
index 3a4e2ef..1e3ec97 100644
--- a/vibrator/1.2/vts/functional/Android.bp
+++ b/vibrator/1.2/vts/functional/Android.bp
@@ -23,5 +23,6 @@
         "android.hardware.vibrator@1.1",
         "android.hardware.vibrator@1.2",
     ],
+    test_suites: ["general-tests"],
 }
 
diff --git a/vibrator/1.2/vts/functional/VtsHalVibratorV1_2TargetTest.cpp b/vibrator/1.2/vts/functional/VtsHalVibratorV1_2TargetTest.cpp
index 3ed689a..d69695a 100644
--- a/vibrator/1.2/vts/functional/VtsHalVibratorV1_2TargetTest.cpp
+++ b/vibrator/1.2/vts/functional/VtsHalVibratorV1_2TargetTest.cpp
@@ -28,7 +28,7 @@
 using ::android::hardware::vibrator::V1_0::EffectStrength;
 using ::android::hardware::vibrator::V1_2::Effect;
 using ::android::hardware::vibrator::V1_2::IVibrator;
-using ::android::hardware::hidl_enum_iterator;
+using ::android::hardware::hidl_enum_range;
 using ::android::hardware::Return;
 using ::android::hardware::Void;
 using ::android::sp;
@@ -86,8 +86,8 @@
  * a valid duration, or are unsupported and return UNSUPPORTED_OPERATION with a duration of 0.
  */
 TEST_F(VibratorHidlTest_1_2, PerformEffect_1_2) {
-    for (const auto& effect : hidl_enum_iterator<Effect>()) {
-        for (const auto& strength : hidl_enum_iterator<EffectStrength>()) {
+    for (const auto& effect : hidl_enum_range<Effect>()) {
+        for (const auto& strength : hidl_enum_range<EffectStrength>()) {
             EXPECT_OK(vibrator->perform_1_2(effect, strength, validatePerformEffect));
         }
     }
@@ -97,7 +97,7 @@
  * Test to make sure effect values above the valid range are rejected.
  */
 TEST_F(VibratorHidlTest_1_2, PerformEffect_1_2_BadEffects_AboveValidRange) {
-    Effect effect = *std::prev(hidl_enum_iterator<Effect>().end());
+    Effect effect = *std::prev(hidl_enum_range<Effect>().end());
     Effect badEffect = static_cast<Effect>(static_cast<int32_t>(effect) + 1);
     EXPECT_OK(
         vibrator->perform_1_2(badEffect, EffectStrength::LIGHT, validatePerformEffectBadInput));
@@ -107,7 +107,7 @@
  * Test to make sure effect values below the valid range are rejected.
  */
 TEST_F(VibratorHidlTest_1_2, PerformEffect_1_2_BadEffects_BelowValidRange) {
-    Effect effect = *hidl_enum_iterator<Effect>().begin();
+    Effect effect = *hidl_enum_range<Effect>().begin();
     Effect badEffect = static_cast<Effect>(static_cast<int32_t>(effect) - 1);
     EXPECT_OK(
         vibrator->perform_1_2(badEffect, EffectStrength::LIGHT, validatePerformEffectBadInput));
@@ -117,7 +117,7 @@
  * Test to make sure strength values above the valid range are rejected.
  */
 TEST_F(VibratorHidlTest_1_2, PerformEffect_1_2_BadStrength_AboveValidRange) {
-    EffectStrength strength = *std::prev(hidl_enum_iterator<EffectStrength>().end());
+    EffectStrength strength = *std::prev(hidl_enum_range<EffectStrength>().end());
     EffectStrength badStrength = static_cast<EffectStrength>(static_cast<int32_t>(strength) + 1);
     EXPECT_OK(vibrator->perform_1_2(Effect::THUD, badStrength, validatePerformEffectBadInput));
 }
@@ -126,7 +126,7 @@
  * Test to make sure strength values below the valid range are rejected.
  */
 TEST_F(VibratorHidlTest_1_2, PerformEffect_1_2_BadStrength_BelowValidRange) {
-    EffectStrength strength = *hidl_enum_iterator<EffectStrength>().begin();
+    EffectStrength strength = *hidl_enum_range<EffectStrength>().begin();
     EffectStrength badStrength = static_cast<EffectStrength>(static_cast<int32_t>(strength) - 1);
     EXPECT_OK(vibrator->perform_1_2(Effect::THUD, badStrength, validatePerformEffectBadInput));
 }
diff --git a/vr/1.0/vts/functional/Android.bp b/vr/1.0/vts/functional/Android.bp
index 4029137..958cce7 100644
--- a/vr/1.0/vts/functional/Android.bp
+++ b/vr/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalVrV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.vr@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/weaver/1.0/vts/functional/Android.bp b/weaver/1.0/vts/functional/Android.bp
index 0089d89..9fdbb18 100644
--- a/weaver/1.0/vts/functional/Android.bp
+++ b/weaver/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalWeaverV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.weaver@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/wifi/1.0/vts/functional/Android.bp b/wifi/1.0/vts/functional/Android.bp
index b2f76a3..d7c84cc 100644
--- a/wifi/1.0/vts/functional/Android.bp
+++ b/wifi/1.0/vts/functional/Android.bp
@@ -16,7 +16,7 @@
 
 cc_library_static {
     name: "VtsHalWifiV1_0TargetTestUtil",
-    defaults: ["hidl_defaults"],
+    defaults: ["VtsHalTargetTestDefaults"],
     srcs: [
         "wifi_hidl_call_util_selftest.cpp",
         "wifi_hidl_test.cpp",
@@ -26,16 +26,9 @@
         "."
     ],
     shared_libs: [
-        "libbase",
-        "liblog",
-        "libcutils",
-        "libhidlbase",
-        "libhidltransport",
         "libnativehelper",
-        "libutils",
-        "android.hardware.wifi@1.0",
     ],
-    static_libs: ["VtsHalHidlTargetTestBase"],
+    static_libs: ["android.hardware.wifi@1.0"],
 }
 
 cc_test {
@@ -53,6 +46,7 @@
         "VtsHalWifiV1_0TargetTestUtil",
         "android.hardware.wifi@1.0",
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -66,4 +60,5 @@
         "VtsHalWifiV1_0TargetTestUtil",
         "android.hardware.wifi@1.0",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/wifi/1.1/vts/functional/Android.bp b/wifi/1.1/vts/functional/Android.bp
index 1b0c12d..78d7a85 100644
--- a/wifi/1.1/vts/functional/Android.bp
+++ b/wifi/1.1/vts/functional/Android.bp
@@ -25,4 +25,5 @@
         "android.hardware.wifi@1.0",
         "android.hardware.wifi@1.1",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/wifi/1.2/default/Android.mk b/wifi/1.2/default/Android.mk
index 3919690..3c26383 100644
--- a/wifi/1.2/default/Android.mk
+++ b/wifi/1.2/default/Android.mk
@@ -30,6 +30,8 @@
 ifdef WIFI_HIDL_FEATURE_DISABLE_AP
 LOCAL_CPPFLAGS += -DWIFI_HIDL_FEATURE_DISABLE_AP
 endif
+# Allow implicit fallthroughs in wifi_legacy_hal.cpp until they are fixed.
+LOCAL_CFLAGS += -Wno-error=implicit-fallthrough
 LOCAL_SRC_FILES := \
     hidl_struct_util.cpp \
     hidl_sync_util.cpp \
diff --git a/wifi/1.2/default/wifi_legacy_hal.cpp b/wifi/1.2/default/wifi_legacy_hal.cpp
index 375204c..55ec96d 100644
--- a/wifi/1.2/default/wifi_legacy_hal.cpp
+++ b/wifi/1.2/default/wifi_legacy_hal.cpp
@@ -550,6 +550,7 @@
                 }
                 // Fall through if failed. Failure to retrieve cached scan
                 // results should trigger a background scan failure.
+                [[fallthrough]];
                 case WIFI_SCAN_FAILED:
                     on_failure_user_callback(id);
                     on_gscan_event_internal_callback = nullptr;
diff --git a/wifi/1.2/default/wifi_legacy_hal.h b/wifi/1.2/default/wifi_legacy_hal.h
index 60905ab..00dfeef 100644
--- a/wifi/1.2/default/wifi_legacy_hal.h
+++ b/wifi/1.2/default/wifi_legacy_hal.h
@@ -25,6 +25,12 @@
 
 #include <wifi_system/interface_tool.h>
 
+// HACK: The include inside the namespace below also transitively includes a
+// bunch of libc headers into the namespace, which leads to functions like
+// socketpair being defined in android::hardware::wifi::V1_1::implementation::legacy_hal.
+// Include this one particular header as a hacky workaround until that's fixed.
+#include <sys/socket.h>
+
 namespace android {
 namespace hardware {
 namespace wifi {
diff --git a/wifi/1.2/vts/functional/Android.bp b/wifi/1.2/vts/functional/Android.bp
index c5a6e84..a969f65 100644
--- a/wifi/1.2/vts/functional/Android.bp
+++ b/wifi/1.2/vts/functional/Android.bp
@@ -28,6 +28,7 @@
         "android.hardware.wifi@1.1",
         "android.hardware.wifi@1.2",
     ],
+    test_suites: ["general-tests"],
 }
 
 cc_test {
@@ -43,4 +44,5 @@
         "android.hardware.wifi@1.1",
         "android.hardware.wifi@1.2",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/wifi/hostapd/1.0/vts/functional/Android.bp b/wifi/hostapd/1.0/vts/functional/Android.bp
index 7a920b4..79c5183 100644
--- a/wifi/hostapd/1.0/vts/functional/Android.bp
+++ b/wifi/hostapd/1.0/vts/functional/Android.bp
@@ -49,4 +49,5 @@
         "libwifi-system",
         "libwifi-system-iface",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/wifi/offload/1.0/vts/functional/Android.bp b/wifi/offload/1.0/vts/functional/Android.bp
index 140e45e..de15aa7 100644
--- a/wifi/offload/1.0/vts/functional/Android.bp
+++ b/wifi/offload/1.0/vts/functional/Android.bp
@@ -19,4 +19,5 @@
     defaults: ["VtsHalTargetTestDefaults"],
     srcs: ["VtsHalWifiOffloadV1_0TargetTest.cpp"],
     static_libs: ["android.hardware.wifi.offload@1.0"],
+    test_suites: ["general-tests"],
 }
diff --git a/wifi/supplicant/1.0/vts/functional/Android.bp b/wifi/supplicant/1.0/vts/functional/Android.bp
index ee6a68e..de53fa2 100644
--- a/wifi/supplicant/1.0/vts/functional/Android.bp
+++ b/wifi/supplicant/1.0/vts/functional/Android.bp
@@ -54,4 +54,5 @@
         "libwifi-system",
         "libwifi-system-iface",
     ],
+    test_suites: ["general-tests"],
 }
diff --git a/wifi/supplicant/1.1/vts/functional/Android.bp b/wifi/supplicant/1.1/vts/functional/Android.bp
index 3e65453..353ae4b 100644
--- a/wifi/supplicant/1.1/vts/functional/Android.bp
+++ b/wifi/supplicant/1.1/vts/functional/Android.bp
@@ -56,4 +56,5 @@
         "libwifi-system",
         "libwifi-system-iface",
     ],
+    test_suites: ["general-tests"],
 }