diff --git a/biometrics/fingerprint/aidl/default/Android.bp b/biometrics/fingerprint/aidl/default/Android.bp
index e6628f2..70fadfe 100644
--- a/biometrics/fingerprint/aidl/default/Android.bp
+++ b/biometrics/fingerprint/aidl/default/Android.bp
@@ -11,8 +11,8 @@
     name: "android.hardware.biometrics.fingerprint-service.example",
     vendor: true,
     relative_install_path: "hw",
-    init_rc: ["fingerprint-default.rc"],
-    vintf_fragments: ["fingerprint-default.xml"],
+    init_rc: ["fingerprint-example.rc"],
+    vintf_fragments: ["fingerprint-example.xml"],
     local_include_dirs: ["include"],
     srcs: [
         "CancellationSignal.cpp",
diff --git a/biometrics/fingerprint/aidl/default/README.md b/biometrics/fingerprint/aidl/default/README.md
index 046602f..a6e6b81 100644
--- a/biometrics/fingerprint/aidl/default/README.md
+++ b/biometrics/fingerprint/aidl/default/README.md
@@ -1,17 +1,30 @@
 # Virtual Fingerprint HAL
 
-This is a virtual HAL implementation that is backed by system properties
-instead of actual hardware. It's intended for testing and UI development
-on debuggable builds to allow devices to masquerade as alternative device
-types and for emulators.
+This is a virtual HAL implementation that is backed by system properties instead
+of actual hardware. It's intended for testing and UI development on debuggable
+builds to allow devices to masquerade as alternative device types and for
+emulators.
+
+## Supported Devices
+
+This HAL can be used on emulators, like cuttlefish, or on real devices. Add the
+following to your device's `.mk` file to include it:
+
+```
+PRODUCT_PACKAGES_DEBUG += android.hardware.biometrics.fingerprint-service.example
+```
+
+The virtual HAL will be ignored if a real HAL is also installed on the target
+device. Set the `biometric_virtual_enabled` settings and reboot the device to
+switch to the virtual HAL. Unset it and reboot again to switch back.
 
 ## Getting Started
 
 First, set the type of sensor the device should use, enable the virtual
 extensions in the framework, and reboot.
 
-This doesn't work with HIDL and you typically need to have a PIN or password
-set for things to work correctly, so this is a good time to set those too.
+This doesn't work with HIDL and you typically need to have a PIN or password set
+for things to work correctly, so this is a good time to set those too.
 
 ```shell
 $ adb root
@@ -24,22 +37,23 @@
 
 ### Enrollments
 
-Next, setup enrollments on the device. This can either be done through
-the UI, or via adb. 
+Next, setup enrollments on the device. This can either be done through the UI,
+or via adb.
 
 #### UI Enrollment
 
-  1. Tee up the results of the enrollment before starting the process:
+1. Tee up the results of the enrollment before starting the process:
 
-        ```shell
-        $ adb shell setprop vendor.fingerprint.virtual.next_enrollment 1:100,100,100:true
-        ```
-  2. Navigate to `Settings -> Security -> Fingerprint Unlock` and follow the prompts.
-  3. Verify the enrollments in the UI:
+      ```shell
+      $ adb shell setprop vendor.fingerprint.virtual.next_enrollment 1:100,100,100:true
+      ```
+2. Navigate to `Settings -> Security -> Fingerprint Unlock` and follow the
+   prompts.
+3. Verify the enrollments in the UI:
 
-        ```shell
-        $ adb shell getprop persist.vendor.fingerprint.virtual.enrollments
-        ```
+      ```shell
+      $ adb shell getprop persist.vendor.fingerprint.virtual.enrollments
+      ```
 
 #### Direct Enrollment
 
@@ -51,10 +65,10 @@
 $ adb shell cmd fingerprint sync
 ```
 
-Note: You may need to do this twice. The templates are checked
-as part of some lazy operations, like user switching and startup, which can 
-cause the framework to delete the enrollments before the sync operation runs.
-Until this is fixed, just run the commands twice as a workaround.
+**Note: You may need to do this twice.** The templates are checked as part of
+some lazy operations, like user switching and startup, which can cause the
+framework to delete the enrollments before the sync operation runs. Until this
+is fixed, just run the commands twice as a workaround.
 
 ### Authenticate
 
diff --git a/biometrics/fingerprint/aidl/default/fingerprint-default.rc b/biometrics/fingerprint/aidl/default/fingerprint-default.rc
deleted file mode 100644
index eb62c56..0000000
--- a/biometrics/fingerprint/aidl/default/fingerprint-default.rc
+++ /dev/null
@@ -1,5 +0,0 @@
-service vendor.fingerprint-default /vendor/bin/hw/android.hardware.biometrics.fingerprint-service.example
-    class hal
-    user nobody
-    group nobody
-
diff --git a/biometrics/fingerprint/aidl/default/fingerprint-example.rc b/biometrics/fingerprint/aidl/default/fingerprint-example.rc
new file mode 100644
index 0000000..574438e
--- /dev/null
+++ b/biometrics/fingerprint/aidl/default/fingerprint-example.rc
@@ -0,0 +1,4 @@
+service vendor.fingerprint-example /vendor/bin/hw/android.hardware.biometrics.fingerprint-service.example
+    class hal
+    user nobody
+    group nobody
diff --git a/biometrics/fingerprint/aidl/default/fingerprint-default.xml b/biometrics/fingerprint/aidl/default/fingerprint-example.xml
similarity index 79%
rename from biometrics/fingerprint/aidl/default/fingerprint-default.xml
rename to biometrics/fingerprint/aidl/default/fingerprint-example.xml
index d322eb6..05d1279 100644
--- a/biometrics/fingerprint/aidl/default/fingerprint-default.xml
+++ b/biometrics/fingerprint/aidl/default/fingerprint-example.xml
@@ -2,6 +2,6 @@
     <hal format="aidl">
         <name>android.hardware.biometrics.fingerprint</name>
         <version>2</version>
-        <fqname>IFingerprint/default</fqname>
+        <fqname>IFingerprint/virtual</fqname>
     </hal>
 </manifest>
diff --git a/biometrics/fingerprint/aidl/default/main.cpp b/biometrics/fingerprint/aidl/default/main.cpp
index c985201..0e672b1 100644
--- a/biometrics/fingerprint/aidl/default/main.cpp
+++ b/biometrics/fingerprint/aidl/default/main.cpp
@@ -27,7 +27,7 @@
     ABinderProcess_setThreadPoolMaxThreadCount(0);
     std::shared_ptr<Fingerprint> hal = ndk::SharedRefBase::make<Fingerprint>();
 
-    const std::string instance = std::string(Fingerprint::descriptor) + "/default";
+    const std::string instance = std::string(Fingerprint::descriptor) + "/virtual";
     binder_status_t status = AServiceManager_addService(hal->asBinder().get(), instance.c_str());
     CHECK_EQ(status, STATUS_OK);
 
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
index e3b17f5..c49aaab 100644
--- a/compatibility_matrices/compatibility_matrix.current.xml
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -142,6 +142,7 @@
         <interface>
             <name>IFingerprint</name>
             <instance>default</instance>
+            <instance>virtual</instance>
         </interface>
     </hal>
     <hal format="hidl" optional="true">