diff --git a/automotive/audiocontrol/1.0/default/android.hardware.automotive.audiocontrol@1.0-service.rc b/automotive/audiocontrol/1.0/default/android.hardware.automotive.audiocontrol@1.0-service.rc
index 79edad6..c02db08 100644
--- a/automotive/audiocontrol/1.0/default/android.hardware.automotive.audiocontrol@1.0-service.rc
+++ b/automotive/audiocontrol/1.0/default/android.hardware.automotive.audiocontrol@1.0-service.rc
@@ -1,4 +1,4 @@
-service vendor.evs-hal-mock /vendor/bin/hw/android.hardware.automotive.audiocontrol@1.0-service
+service vendor.audiocontrol-hal-1.0 /vendor/bin/hw/android.hardware.automotive.audiocontrol@1.0-service
     class hal
     user audioserver
     group system
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/VehicleEmulator.cpp b/automotive/vehicle/2.0/default/impl/vhal_v2_0/VehicleEmulator.cpp
index fca8e9e..bf7be09 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/VehicleEmulator.cpp
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/VehicleEmulator.cpp
@@ -138,6 +138,7 @@
     VehiclePropValue val = {
         .prop = protoVal.prop(),
         .areaId = protoVal.area_id(),
+        .status = (VehiclePropertyStatus)protoVal.status(),
         .timestamp = elapsedRealtimeNano(),
     };
 
@@ -288,6 +289,7 @@
     protoVal->set_prop(val->prop);
     protoVal->set_value_type(toInt(getPropType(val->prop)));
     protoVal->set_timestamp(val->timestamp);
+    protoVal->set_status((emulator::VehiclePropStatus)(val->status));
     protoVal->set_area_id(val->areaId);
 
     // Copy value data if it is set.
diff --git a/automotive/vehicle/2.0/default/impl/vhal_v2_0/proto/VehicleHalProto.proto b/automotive/vehicle/2.0/default/impl/vhal_v2_0/proto/VehicleHalProto.proto
index 86433f5..2ef64fb 100644
--- a/automotive/vehicle/2.0/default/impl/vhal_v2_0/proto/VehicleHalProto.proto
+++ b/automotive/vehicle/2.0/default/impl/vhal_v2_0/proto/VehicleHalProto.proto
@@ -46,6 +46,12 @@
     ERROR_INVALID_OPERATION             = 8;
 }
 
+enum VehiclePropStatus {
+    AVAILABLE                           = 0;
+    UNAVAILABLE                         = 1;
+    ERROR                               = 2;
+}
+
 message VehicleAreaConfig {
     required int32  area_id             = 1;
     optional sint32 min_int32_value     = 2;
@@ -61,7 +67,7 @@
     optional int32             access              = 2;
     optional int32             change_mode         = 3;
     optional int32             value_type          = 4;
-    optional int32             supported_areas     = 5;
+    optional int32             supported_areas     = 5;     // Deprecated - DO NOT USE
     repeated VehicleAreaConfig area_configs        = 6;
     optional int32             config_flags        = 7;
     repeated int32             config_array        = 8;
@@ -75,6 +81,7 @@
     required int32  prop                = 1;
     optional int32  value_type          = 2;
     optional int64  timestamp           = 3;    // required for valid data from HAL, skipped for set
+    optional VehiclePropStatus  status  = 10;   // required for valid data from HAL, skipped for set
 
     // values
     optional int32  area_id             = 4;
diff --git a/camera/common/1.0/default/HandleImporter.cpp b/camera/common/1.0/default/HandleImporter.cpp
index e9741ef..21706a8 100644
--- a/camera/common/1.0/default/HandleImporter.cpp
+++ b/camera/common/1.0/default/HandleImporter.cpp
@@ -134,6 +134,38 @@
     }
 }
 
+void* HandleImporter::lock(
+        buffer_handle_t& buf, uint64_t cpuUsage, size_t size) {
+    Mutex::Autolock lock(mLock);
+    void *ret = 0;
+    IMapper::Rect accessRegion { 0, 0, static_cast<int>(size), 1 };
+
+    if (!mInitialized) {
+        initializeLocked();
+    }
+
+    if (mMapper == nullptr) {
+        ALOGE("%s: mMapper is null!", __FUNCTION__);
+        return ret;
+    }
+
+    hidl_handle acquireFenceHandle;
+    auto buffer = const_cast<native_handle_t*>(buf);
+    mMapper->lock(buffer, cpuUsage, accessRegion, acquireFenceHandle,
+            [&](const auto& tmpError, const auto& tmpPtr) {
+                if (tmpError == MapperError::NONE) {
+                    ret = tmpPtr;
+                } else {
+                    ALOGE("%s: failed to lock error %d!",
+                          __FUNCTION__, tmpError);
+                }
+           });
+
+    ALOGV("%s: ptr %p size: %zu", __FUNCTION__, ret, size);
+    return ret;
+}
+
+
 YCbCrLayout HandleImporter::lockYCbCr(
         buffer_handle_t& buf, uint64_t cpuUsage,
         const IMapper::Rect& accessRegion) {
diff --git a/camera/common/1.0/default/include/HandleImporter.h b/camera/common/1.0/default/include/HandleImporter.h
index 443362d..f9cd9fb 100644
--- a/camera/common/1.0/default/include/HandleImporter.h
+++ b/camera/common/1.0/default/include/HandleImporter.h
@@ -45,6 +45,9 @@
     void closeFence(int fd) const;
 
     // Assume caller has done waiting for acquire fences
+    void* lock(buffer_handle_t& buf, uint64_t cpuUsage, size_t size);
+
+    // Assume caller has done waiting for acquire fences
     YCbCrLayout lockYCbCr(buffer_handle_t& buf, uint64_t cpuUsage,
                           const IMapper::Rect& accessRegion);
 
diff --git a/camera/device/3.4/default/ExternalCameraDevice.cpp b/camera/device/3.4/default/ExternalCameraDevice.cpp
index c1f6114..e6e0ae3 100644
--- a/camera/device/3.4/default/ExternalCameraDevice.cpp
+++ b/camera/device/3.4/default/ExternalCameraDevice.cpp
@@ -47,7 +47,7 @@
 //       Also make sure that can be done without editing source code
 
 // TODO: b/72261675: make it dynamic since this affects memory usage
-const int kMaxJpegSize = {13 * 1024 * 1024};  // 13MB
+const int kMaxJpegSize = {5 * 1024 * 1024};  // 5MB
 } // anonymous namespace
 
 ExternalCameraDevice::ExternalCameraDevice(const std::string& cameraId) :
diff --git a/camera/device/3.4/default/ExternalCameraDeviceSession.cpp b/camera/device/3.4/default/ExternalCameraDeviceSession.cpp
index 2face78..0714ee2 100644
--- a/camera/device/3.4/default/ExternalCameraDeviceSession.cpp
+++ b/camera/device/3.4/default/ExternalCameraDeviceSession.cpp
@@ -1681,6 +1681,7 @@
         switch (config.streams[i].format) {
             case PixelFormat::BLOB:
             case PixelFormat::YCBCR_420_888:
+            case PixelFormat::YV12: // Used by SurfaceTexture
                 // No override
                 out->streams[i].v3_2.overrideFormat = config.streams[i].format;
                 break;
@@ -1693,7 +1694,7 @@
                 mStreamMap[config.streams[i].id].format = out->streams[i].v3_2.overrideFormat;
                 break;
             default:
-                ALOGE("%s: unsupported format %x", __FUNCTION__, config.streams[i].format);
+                ALOGE("%s: unsupported format 0x%x", __FUNCTION__, config.streams[i].format);
                 return Status::ILLEGAL_ARGUMENT;
         }
     }
@@ -1847,15 +1848,14 @@
     const uint8_t ae_lock = ANDROID_CONTROL_AE_LOCK_OFF;
     UPDATE(md, ANDROID_CONTROL_AE_LOCK, &ae_lock, 1);
 
-
-    // TODO: b/72261912 AF should stay LOCKED until cancel is seen
-    bool afTrigger = false;
+    bool afTrigger = mAfTrigger;
     if (md.exists(ANDROID_CONTROL_AF_TRIGGER)) {
+        Mutex::Autolock _l(mLock);
         camera_metadata_entry entry = md.find(ANDROID_CONTROL_AF_TRIGGER);
         if (entry.data.u8[0] == ANDROID_CONTROL_AF_TRIGGER_START) {
-            afTrigger = true;
+            mAfTrigger = afTrigger = true;
         } else if (entry.data.u8[0] == ANDROID_CONTROL_AF_TRIGGER_CANCEL) {
-            afTrigger = false;
+            mAfTrigger = afTrigger = false;
         }
     }
 
@@ -1885,6 +1885,9 @@
         return -EINVAL;
     }
 
+    const uint8_t flashState = ANDROID_FLASH_STATE_UNAVAILABLE;
+    UPDATE(md, ANDROID_FLASH_STATE, &flashState, 1);
+
     // android.scaler
     const int32_t crop_region[] = {
           active_array_size.data.i32[0], active_array_size.data.i32[1],
diff --git a/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDeviceSession.h b/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDeviceSession.h
index d8a17f6..7d7f52c 100644
--- a/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDeviceSession.h
+++ b/camera/device/3.4/default/include/ext_device_v3_4_impl/ExternalCameraDeviceSession.h
@@ -359,6 +359,8 @@
     // Stream ID -> circulating buffers map
     std::map<int, CirculatingBuffers> mCirculatingBuffers;
 
+    bool mAfTrigger = false;
+
     static HandleImporter sHandleImporter;
 
     /* Beginning of members not changed after initialize() */
diff --git a/gnss/1.1/IGnss.hal b/gnss/1.1/IGnss.hal
index 0c3d876..096f251 100644
--- a/gnss/1.1/IGnss.hal
+++ b/gnss/1.1/IGnss.hal
@@ -17,6 +17,7 @@
 package android.hardware.gnss@1.1;
 
 import @1.0::IGnss;
+import @1.0::GnssLocation;
 
 import IGnssCallback;
 import IGnssConfiguration;
@@ -78,4 +79,16 @@
     * @return gnssMeasurementIface Handle to the IGnssMeasurement interface.
     */
     getExtensionGnssMeasurement_1_1() generates (IGnssMeasurement gnssMeasurementIface);
+
+    /**
+     * Injects current location from the best available location provider.
+     *
+     * Unlike injectLocation, this method may inject a recent GNSS location from the HAL
+     * implementation, if that is the best available location known to the framework.
+     *
+     * @param location Location information from the best available location provider.
+     *
+     * @return success Returns true if successful.
+     */
+    injectBestLocation(GnssLocation location) generates (bool success);
 };
\ No newline at end of file
diff --git a/gnss/1.1/IGnssCallback.hal b/gnss/1.1/IGnssCallback.hal
index 7a2849e..9fd71ae 100644
--- a/gnss/1.1/IGnssCallback.hal
+++ b/gnss/1.1/IGnssCallback.hal
@@ -35,4 +35,17 @@
      * @param name String providing the name of the GNSS HAL implementation
      */
     gnssNameCb(string name);
+
+    /**
+     * Callback for requesting Location.
+     *
+     * HAL implementation shall call this when it wants the framework to provide location to assist
+     * with GNSS HAL operation. For example, to assist with time to first fix, and/or error
+     * recovery, it may ask for a location that is independent from GNSS (e.g. from the "network"
+     * LocationProvier), or to provide a Device-Based-Hybrid location to supplement A-GPS/GNSS
+     * emergency call flows managed by the GNSS HAL.
+     *
+     * @param independentFromGnss True if requesting a location that is independent from GNSS.
+     */
+    gnssRequestLocationCb(bool independentFromGnss);
 };
\ No newline at end of file
diff --git a/gnss/1.1/vts/functional/gnss_hal_test.h b/gnss/1.1/vts/functional/gnss_hal_test.h
index a06db5d..6aab3cb 100644
--- a/gnss/1.1/vts/functional/gnss_hal_test.h
+++ b/gnss/1.1/vts/functional/gnss_hal_test.h
@@ -74,6 +74,9 @@
         }
         Return<void> gnssAcquireWakelockCb() override { return Void(); }
         Return<void> gnssReleaseWakelockCb() override { return Void(); }
+        Return<void> gnssRequestLocationCb(bool /* independentFromGnss */) override {
+            return Void();
+        }
         Return<void> gnssRequestTimeCb() override { return Void(); }
         // Actual (test) callback handlers
         Return<void> gnssNameCb(const android::hardware::hidl_string& name) override;
diff --git a/gnss/1.1/vts/functional/gnss_hal_test_cases.cpp b/gnss/1.1/vts/functional/gnss_hal_test_cases.cpp
index c9e36a9..55f0acc 100644
--- a/gnss/1.1/vts/functional/gnss_hal_test_cases.cpp
+++ b/gnss/1.1/vts/functional/gnss_hal_test_cases.cpp
@@ -23,6 +23,7 @@
 using android::hardware::hidl_vec;
 
 using android::hardware::gnss::V1_0::GnssConstellationType;
+using android::hardware::gnss::V1_0::GnssLocation;
 using android::hardware::gnss::V1_1::IGnssConfiguration;
 using android::hardware::gnss::V1_1::IGnssMeasurement;
 
@@ -363,4 +364,35 @@
     result = gnss_configuration_hal->setBlacklist(sources);
     ASSERT_TRUE(result.isOk());
     EXPECT_TRUE(result);
-}
\ No newline at end of file
+}
+
+/*
+ * InjectBestLocation
+ *
+ * Ensure successfully injecting a location.
+ */
+TEST_F(GnssHalTest, InjectBestLocation) {
+    GnssLocation gnssLocation = {.gnssLocationFlags = 0,  // set below
+                                 .latitudeDegrees = 43.0,
+                                 .longitudeDegrees = -180,
+                                 .altitudeMeters = 1000,
+                                 .speedMetersPerSec = 0,
+                                 .bearingDegrees = 0,
+                                 .horizontalAccuracyMeters = 0.1,
+                                 .verticalAccuracyMeters = 0.1,
+                                 .speedAccuracyMetersPerSecond = 0.1,
+                                 .bearingAccuracyDegrees = 0.1,
+                                 .timestamp = 1534567890123L};
+    gnssLocation.gnssLocationFlags |=
+        GnssLocationFlags::HAS_LAT_LONG | GnssLocationFlags::HAS_ALTITUDE |
+        GnssLocationFlags::HAS_SPEED | GnssLocationFlags::HAS_HORIZONTAL_ACCURACY |
+        GnssLocationFlags::HAS_VERTICAL_ACCURACY | GnssLocationFlags::HAS_SPEED_ACCURACY |
+        GnssLocationFlags::HAS_BEARING | GnssLocationFlags::HAS_BEARING_ACCURACY;
+
+    CheckLocation(gnssLocation, true);
+
+    auto result = gnss_hal_->injectBestLocation(gnssLocation);
+
+    ASSERT_TRUE(result.isOk());
+    EXPECT_TRUE(result);
+}
diff --git a/radio/1.2/IRadio.hal b/radio/1.2/IRadio.hal
index babe86f..67ce56c 100644
--- a/radio/1.2/IRadio.hal
+++ b/radio/1.2/IRadio.hal
@@ -18,6 +18,8 @@
 
 import @1.1::IRadio;
 import @1.1::RadioAccessNetworks;
+import @1.0::DataProfileInfo;
+import @1.0::RadioTechnology;
 
 /**
  * This interface is used by telephony and telecom to talk to cellular radio.
@@ -106,4 +108,67 @@
     oneway setLinkCapacityReportingCriteria(int32_t serial, int32_t hysteresisMs,
             int32_t hysteresisDlKbps, int32_t hysteresisUlKbps, vec<int32_t> thresholdsDownlinkKbps,
             vec<int32_t> thresholdsUplinkKbps, RadioAccessNetworks ran);
+
+    /**
+     * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
+     * the data connection must be added to data calls and a unsolDataCallListChanged() must be
+     * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
+     * lost due to many factors, including deactivateDataCall() being issued, the radio powered
+     * off, reception lost or even transient factors like congestion. This data call list is
+     * returned by getDataCallList() and dataCallListChanged().
+     *
+     * The Radio is expected to:
+     *   - Create one data call context.
+     *   - Create and configure a dedicated interface for the context.
+     *   - The interface must be point to point.
+     *   - The interface is configured with one or more addresses and is capable of sending and
+     *     receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
+     *     for IPv6.
+     *   - Must not modify routing configuration related to this interface; routing management is
+     *     exclusively within the purview of the Android OS.
+     *   - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
+     *     in the response of getDataRegistrationState.
+     *
+     * @param serial Serial number of request.
+     * @param accessNetwork The access network to setup the data call. If the data connection cannot
+     *     be established on the specified access network, the setup request must be failed.
+     * @param dataProfileInfo Data profile info.
+     * @param modemCognitive Indicates that the requested profile has previously been provided via
+     *     setDataProfile().
+     * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
+     * @param isRoaming Indicates whether or not the framework has requested this setupDataCall for
+     *     a roaming network. The 'protocol' parameter in the old RIL API must be filled
+     *     accordingly based on the roaming condition. Note this is for backward compatibility with
+     *     the old radio modem. The modem must not use this param for any other reason.
+     * @param reason The request reason. Must be DataRequestReason.NORMAL or
+     *     DataRequestReason.HANDOVER.
+     * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
+     *     addresses of the existing data connection. The format is IP address with optional "/"
+     *     prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
+     *     "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
+     *     the prefix length is absent, then the addresses are assumed to be point to point with
+     *     IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored
+     *     unless reason is DataRequestReason.HANDOVER.
+     * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
+     *     addresses of the existing data connection. The format is defined in RFC-4291 section
+     *     2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
+     *     reason is DataRequestReason.HANDOVER.
+     *
+     * Response function is IRadioResponse.setupDataCallResponse()
+     */
+    oneway setupDataCall_1_2(int32_t serial, AccessNetwork accessNetwork,
+            DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed,
+            bool isRoaming, DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+
+    /**
+     * Deactivate packet data connection and remove from the data call list. An
+     * unsolDataCallListChanged() must be sent when data connection is deactivated.
+     *
+     * @param serial Serial number of request.
+     * @param cid Data call id.
+     * @param reason The request reason. Must be normal, handover, or shutdown.
+     *
+     * Response function is IRadioResponse.deactivateDataCallResponse()
+     */
+    oneway deactivateDataCall_1_2(int32_t serial, int32_t cid, DataRequestReason reason);
 };
diff --git a/radio/1.2/types.hal b/radio/1.2/types.hal
index 4515237..f2f0b69 100644
--- a/radio/1.2/types.hal
+++ b/radio/1.2/types.hal
@@ -335,3 +335,32 @@
      */
     int32_t cellBandwidthDownlink;
 };
+
+enum AccessNetwork : int32_t {
+    /** GSM EDGE Radio Access Network */
+    GERAN       = 1,
+    /** Universal Terrestrial Radio Access Network */
+    UTRAN       = 2,
+    /** Evolved Universal Terrestrial Radio Access Network */
+    EUTRAN      = 3,
+    /** CDMA 2000 network */
+    CDMA2000    = 4,
+    /** Interworking Wireless LAN */
+    IWLAN       = 5
+};
+
+enum DataRequestReason : int32_t {
+    /**
+     * The reason of the data request is normal
+     */
+    NORMAL    = 0x01,
+    /**
+     * The reason of the data request is device shutdown
+     */
+    SHUTDOWN  = 0x02,
+    /**
+     * The reason of the data request is IWLAN data handover to another transport
+     * (e.g. from cellular to wifi or vise versa)
+     */
+    HANDOVER  = 0x03,
+};
diff --git a/wifi/supplicant/1.1/Android.bp b/wifi/supplicant/1.1/Android.bp
index c8c8a32..fafd6ad 100644
--- a/wifi/supplicant/1.1/Android.bp
+++ b/wifi/supplicant/1.1/Android.bp
@@ -8,6 +8,7 @@
     },
     srcs: [
         "ISupplicant.hal",
+        "ISupplicantStaNetwork.hal",
     ],
     interfaces: [
         "android.hardware.wifi.supplicant@1.0",
diff --git a/wifi/supplicant/1.1/ISupplicantStaNetwork.hal b/wifi/supplicant/1.1/ISupplicantStaNetwork.hal
new file mode 100644
index 0000000..186fe75
--- /dev/null
+++ b/wifi/supplicant/1.1/ISupplicantStaNetwork.hal
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.wifi.supplicant@1.1;
+
+import @1.0::ISupplicantNetwork;
+import @1.0::ISupplicantStaNetworkCallback;
+import @1.0::SupplicantStatus;
+import @1.0::ISupplicantStaNetwork;
+
+/**
+ * Interface exposed by the supplicant for each station mode network
+ * configuration it controls.
+ */
+interface ISupplicantStaNetwork extends @1.0::ISupplicantStaNetwork {
+    /**
+     * EAP IMSI Identity to be used for authentication to EAP SIM networks.
+     * The identity must be derived from the IMSI retrieved from the SIM card.
+     *
+     * See RFC4186 & RFC4187 & RFC5448 for EAP SIM protocols.
+     *
+     * Identity string is built from IMSI. Format is:
+     *       eapPrefix | IMSI | '@' | realm
+     * where:
+     * - "|" denotes concatenation
+     * - realm is the 3GPP network domain name derived from the given
+     *   MCC/MNC according to the 3GGP spec(TS23.003)
+     *
+     * eapPrefix value:
+     * '0' - EAP-AKA Identity
+     * '1' - EAP-SIM Identity
+     * '6' - EAP-AKA-PRIME Identity
+     */
+    typedef vec<uint8_t> EapSimIdentity;
+
+    /**
+     * Encrypted EAP IMSI Identity to be used for authentication to EAP SIM
+     * networks which supports encrypted IMSI.
+     * The identity must be derived from the IMSI retrieved from the SIM card.
+     * This identity is then encrypted using the public key of the carrier.
+     *
+     * See RFC4186 & RFC4187 & RFC5448 for EAP SIM protocols.
+     * See section 7.1 of RFC 2437 for RSA-OAEP encryption scheme.
+     *
+     * Identity string is built from encrypted IMSI. Format is:
+     *       '\0' | Base64{RSA-OAEP-SHA-256(eapPrefix | IMSI)}
+     *       | '@' | realm | {',' Key Identifier}
+     * where:
+     * - "|" denotes concatenation
+     * - "{}" denotes an optional value
+     * - realm is the 3GPP network domain name derived from the given
+     *   MCC/MNC according to the 3GGP spec(TS23.003)
+     * - Key Identifier is a null-terminated string of the form "<Key>=<Value>"
+     */
+    typedef vec<uint8_t> EapSimEncryptedIdentity;
+
+    /**
+     * Set EAP encrypted IMSI Identity for this network.
+     *
+     * @param identity Identity string built from the encrypted IMSI.
+     * @return status Status of the operation.
+     *         Possible status codes:
+     *         |SupplicantStatusCode.SUCCESS|,
+     *         |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+     *         |SupplicantStatusCode.FAILURE_UNKNOWN|,
+     *         |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+     */
+    setEapEncryptedImsiIdentity(EapSimEncryptedIdentity identity)
+        generates (SupplicantStatus status);
+
+    /**
+     * Used to send a response to the
+     * |ISupplicantNetworkCallback.onNetworkEapIdentityRequest| request.
+     *
+     * @param identity Identity string containing the IMSI.
+     * @param encryptedIdentity Identity string containing the encrypted IMSI.
+     * @return status Status of the operation.
+     *         Possible status codes:
+     *         |SupplicantStatusCode.SUCCESS|,
+     *         |SupplicantStatusCode.FAILURE_UNKNOWN|,
+     *         |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
+     */
+    sendNetworkEapIdentityResponse_1_1(
+            EapSimIdentity identity,
+            EapSimEncryptedIdentity encryptedIdentity)
+        generates (SupplicantStatus status);
+};