Introduce Audio V6
Generate with ./newHal.sh 5.0
+ some typo fix in the .hal
+ some clang-tidy run
This new HAL is an exact copy of the V5.
It will be modified in following patches while R is developed.
Test: push V6 to device and check audio works fine
Bug: 134940862
Change-Id: Ic25d30175032e76e0d3208fb876451de9ae6b7b4
Merged-In: Ic25d30175032e76e0d3208fb876451de9ae6b7b4
Signed-off-by: Kevin Rocard <krocard@google.com>
diff --git a/audio/effect/6.0/Android.bp b/audio/effect/6.0/Android.bp
new file mode 100644
index 0000000..b6184f3
--- /dev/null
+++ b/audio/effect/6.0/Android.bp
@@ -0,0 +1,33 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+ name: "android.hardware.audio.effect@6.0",
+ root: "android.hardware",
+ vndk: {
+ enabled: true,
+ },
+ srcs: [
+ "types.hal",
+ "IAcousticEchoCancelerEffect.hal",
+ "IAutomaticGainControlEffect.hal",
+ "IBassBoostEffect.hal",
+ "IDownmixEffect.hal",
+ "IEffect.hal",
+ "IEffectBufferProviderCallback.hal",
+ "IEffectsFactory.hal",
+ "IEnvironmentalReverbEffect.hal",
+ "IEqualizerEffect.hal",
+ "ILoudnessEnhancerEffect.hal",
+ "INoiseSuppressionEffect.hal",
+ "IPresetReverbEffect.hal",
+ "IVirtualizerEffect.hal",
+ "IVisualizerEffect.hal",
+ ],
+ interfaces: [
+ "android.hardware.audio.common@6.0",
+ "android.hidl.base@1.0",
+ "android.hidl.safe_union@1.0",
+ ],
+ gen_java: false,
+ gen_java_constants: true,
+}
diff --git a/audio/effect/6.0/IAcousticEchoCancelerEffect.hal b/audio/effect/6.0/IAcousticEchoCancelerEffect.hal
new file mode 100644
index 0000000..f7d769f
--- /dev/null
+++ b/audio/effect/6.0/IAcousticEchoCancelerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IAcousticEchoCancelerEffect extends IEffect {
+ /**
+ * Sets echo delay value in milliseconds.
+ */
+ setEchoDelay(uint32_t echoDelayMs) generates (Result retval);
+
+ /**
+ * Gets echo delay value in milliseconds.
+ */
+ getEchoDelay() generates (Result retval, uint32_t echoDelayMs);
+};
diff --git a/audio/effect/6.0/IAutomaticGainControlEffect.hal b/audio/effect/6.0/IAutomaticGainControlEffect.hal
new file mode 100644
index 0000000..d264cd4
--- /dev/null
+++ b/audio/effect/6.0/IAutomaticGainControlEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IAutomaticGainControlEffect extends IEffect {
+ /**
+ * Sets target level in millibels.
+ */
+ setTargetLevel(int16_t targetLevelMb) generates (Result retval);
+
+ /**
+ * Gets target level.
+ */
+ getTargetLevel() generates (Result retval, int16_t targetLevelMb);
+
+ /**
+ * Sets gain in the compression range in millibels.
+ */
+ setCompGain(int16_t compGainMb) generates (Result retval);
+
+ /**
+ * Gets gain in the compression range.
+ */
+ getCompGain() generates (Result retval, int16_t compGainMb);
+
+ /**
+ * Enables or disables limiter.
+ */
+ setLimiterEnabled(bool enabled) generates (Result retval);
+
+ /**
+ * Returns whether limiter is enabled.
+ */
+ isLimiterEnabled() generates (Result retval, bool enabled);
+
+ struct AllProperties {
+ int16_t targetLevelMb;
+ int16_t compGainMb;
+ bool limiterEnabled;
+ };
+
+ /**
+ * Sets all properties at once.
+ */
+ setAllProperties(AllProperties properties) generates (Result retval);
+
+ /**
+ * Gets all properties at once.
+ */
+ getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/6.0/IBassBoostEffect.hal b/audio/effect/6.0/IBassBoostEffect.hal
new file mode 100644
index 0000000..91c4092
--- /dev/null
+++ b/audio/effect/6.0/IBassBoostEffect.hal
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IBassBoostEffect extends IEffect {
+ /**
+ * Returns whether setting bass boost strength is supported.
+ */
+ isStrengthSupported() generates (Result retval, bool strengthSupported);
+
+ enum StrengthRange : uint16_t {
+ MIN = 0,
+ MAX = 1000
+ };
+
+ /**
+ * Sets bass boost strength.
+ *
+ * @param strength strength of the effect. The valid range for strength
+ * strength is [0, 1000], where 0 per mille designates the
+ * mildest effect and 1000 per mille designates the
+ * strongest.
+ * @return retval operation completion status.
+ */
+ setStrength(uint16_t strength) generates (Result retval);
+
+ /**
+ * Gets virtualization strength.
+ */
+ getStrength() generates (Result retval, uint16_t strength);
+};
diff --git a/audio/effect/6.0/IDownmixEffect.hal b/audio/effect/6.0/IDownmixEffect.hal
new file mode 100644
index 0000000..e3a38e2
--- /dev/null
+++ b/audio/effect/6.0/IDownmixEffect.hal
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IDownmixEffect extends IEffect {
+ enum Type : int32_t {
+ STRIP, // throw away the extra channels
+ FOLD // mix the extra channels with FL/FR
+ };
+
+ /**
+ * Sets the current downmix preset.
+ */
+ setType(Type preset) generates (Result retval);
+
+ /**
+ * Gets the current downmix preset.
+ */
+ getType() generates (Result retval, Type preset);
+};
diff --git a/audio/effect/6.0/IEffect.hal b/audio/effect/6.0/IEffect.hal
new file mode 100644
index 0000000..b35afee
--- /dev/null
+++ b/audio/effect/6.0/IEffect.hal
@@ -0,0 +1,418 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffectBufferProviderCallback;
+
+interface IEffect {
+ /**
+ * Initialize effect engine--all configurations return to default.
+ *
+ * @return retval operation completion status.
+ */
+ @entry
+ init() generates (Result retval);
+
+ /**
+ * Apply new audio parameters configurations for input and output buffers.
+ * The provider callbacks may be empty, but in this case the buffer
+ * must be provided in the EffectConfig structure.
+ *
+ * @param config configuration descriptor.
+ * @param inputBufferProvider optional buffer provider reference.
+ * @param outputBufferProvider optional buffer provider reference.
+ * @return retval operation completion status.
+ */
+ setConfig(EffectConfig config,
+ IEffectBufferProviderCallback inputBufferProvider,
+ IEffectBufferProviderCallback outputBufferProvider)
+ generates (Result retval);
+
+ /**
+ * Reset the effect engine. Keep configuration but resets state and buffer
+ * content.
+ *
+ * @return retval operation completion status.
+ */
+ reset() generates (Result retval);
+
+ /**
+ * Enable processing.
+ *
+ * @return retval operation completion status.
+ */
+ @callflow(next={"prepareForProcessing"})
+ enable() generates (Result retval);
+
+ /**
+ * Disable processing.
+ *
+ * @return retval operation completion status.
+ */
+ @callflow(next={"close"})
+ disable() generates (Result retval);
+
+ /**
+ * Set the rendering device the audio output path is connected to. The
+ * effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its
+ * descriptor to receive this command when the device changes.
+ *
+ * Note: this method is only supported for effects inserted into
+ * the output chain.
+ *
+ * @param device output device specification.
+ * @return retval operation completion status.
+ */
+ setDevice(bitfield<AudioDevice> device) generates (Result retval);
+
+ /**
+ * Set and get volume. Used by audio framework to delegate volume control to
+ * effect engine. The effect implementation must set EFFECT_FLAG_VOLUME_CTRL
+ * flag in its descriptor to receive this command. The effect engine must
+ * return the volume that should be applied before the effect is
+ * processed. The overall volume (the volume actually applied by the effect
+ * engine multiplied by the returned value) should match the value indicated
+ * in the command.
+ *
+ * @param volumes vector containing volume for each channel defined in
+ * EffectConfig for output buffer expressed in 8.24 fixed
+ * point format.
+ * @return result updated volume values.
+ * @return retval operation completion status.
+ */
+ setAndGetVolume(vec<uint32_t> volumes)
+ generates (Result retval, vec<uint32_t> result);
+
+ /**
+ * Notify the effect of the volume change. The effect implementation must
+ * set EFFECT_FLAG_VOLUME_IND flag in its descriptor to receive this
+ * command.
+ *
+ * @param volumes vector containing volume for each channel defined in
+ * EffectConfig for output buffer expressed in 8.24 fixed
+ * point format.
+ * @return retval operation completion status.
+ */
+ volumeChangeNotification(vec<uint32_t> volumes)
+ generates (Result retval);
+
+ /**
+ * Set the audio mode. The effect implementation must set
+ * EFFECT_FLAG_AUDIO_MODE_IND flag in its descriptor to receive this command
+ * when the audio mode changes.
+ *
+ * @param mode desired audio mode.
+ * @return retval operation completion status.
+ */
+ setAudioMode(AudioMode mode) generates (Result retval);
+
+ /**
+ * Apply new audio parameters configurations for input and output buffers of
+ * reverse stream. An example of reverse stream is the echo reference
+ * supplied to an Acoustic Echo Canceler.
+ *
+ * @param config configuration descriptor.
+ * @param inputBufferProvider optional buffer provider reference.
+ * @param outputBufferProvider optional buffer provider reference.
+ * @return retval operation completion status.
+ */
+ setConfigReverse(EffectConfig config,
+ IEffectBufferProviderCallback inputBufferProvider,
+ IEffectBufferProviderCallback outputBufferProvider)
+ generates (Result retval);
+
+ /**
+ * Set the capture device the audio input path is connected to. The effect
+ * implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to
+ * receive this command when the device changes.
+ *
+ * Note: this method is only supported for effects inserted into
+ * the input chain.
+ *
+ * @param device input device specification.
+ * @return retval operation completion status.
+ */
+ setInputDevice(bitfield<AudioDevice> device) generates (Result retval);
+
+ /**
+ * Read audio parameters configurations for input and output buffers.
+ *
+ * @return retval operation completion status.
+ * @return config configuration descriptor.
+ */
+ getConfig() generates (Result retval, EffectConfig config);
+
+ /**
+ * Read audio parameters configurations for input and output buffers of
+ * reverse stream.
+ *
+ * @return retval operation completion status.
+ * @return config configuration descriptor.
+ */
+ getConfigReverse() generates (Result retval, EffectConfig config);
+
+ /**
+ * Queries for supported combinations of main and auxiliary channels
+ * (e.g. for a multi-microphone noise suppressor).
+ *
+ * @param maxConfigs maximum number of the combinations to return.
+ * @return retval absence of the feature support is indicated using
+ * NOT_SUPPORTED code. RESULT_TOO_BIG is returned if
+ * the number of supported combinations exceeds 'maxConfigs'.
+ * @return result list of configuration descriptors.
+ */
+ getSupportedAuxChannelsConfigs(uint32_t maxConfigs)
+ generates (Result retval, vec<EffectAuxChannelsConfig> result);
+
+ /**
+ * Retrieves the current configuration of main and auxiliary channels.
+ *
+ * @return retval absence of the feature support is indicated using
+ * NOT_SUPPORTED code.
+ * @return result configuration descriptor.
+ */
+ getAuxChannelsConfig()
+ generates (Result retval, EffectAuxChannelsConfig result);
+
+ /**
+ * Sets the current configuration of main and auxiliary channels.
+ *
+ * @return retval operation completion status; absence of the feature
+ * support is indicated using NOT_SUPPORTED code.
+ */
+ setAuxChannelsConfig(EffectAuxChannelsConfig config)
+ generates (Result retval);
+
+ /**
+ * Set the audio source the capture path is configured for (Camcorder, voice
+ * recognition...).
+ *
+ * Note: this method is only supported for effects inserted into
+ * the input chain.
+ *
+ * @param source source descriptor.
+ * @return retval operation completion status.
+ */
+ setAudioSource(AudioSource source) generates (Result retval);
+
+ /**
+ * This command indicates if the playback thread the effect is attached to
+ * is offloaded or not, and updates the I/O handle of the playback thread
+ * the effect is attached to.
+ *
+ * @param param effect offload descriptor.
+ * @return retval operation completion status.
+ */
+ offload(EffectOffloadParameter param) generates (Result retval);
+
+ /**
+ * Returns the effect descriptor.
+ *
+ * @return retval operation completion status.
+ * @return descriptor effect descriptor.
+ */
+ getDescriptor() generates (Result retval, EffectDescriptor descriptor);
+
+ /**
+ * Set up required transports for passing audio buffers to the effect.
+ *
+ * The transport consists of shared memory and a message queue for reporting
+ * effect processing operation status. The shared memory is set up
+ * separately using 'setProcessBuffers' method.
+ *
+ * Processing is requested by setting 'REQUEST_PROCESS' or
+ * 'REQUEST_PROCESS_REVERSE' EventFlags associated with the status message
+ * queue. The result of processing may be one of the following:
+ * OK if there were no errors during processing;
+ * INVALID_ARGUMENTS if audio buffers are invalid;
+ * INVALID_STATE if the engine has finished the disable phase;
+ * NOT_INITIALIZED if the audio buffers were not set;
+ * NOT_SUPPORTED if the requested processing type is not supported by
+ * the effect.
+ *
+ * @return retval OK if both message queues were created successfully.
+ * INVALID_STATE if the method was already called.
+ * INVALID_ARGUMENTS if there was a problem setting up
+ * the queue.
+ * @return statusMQ a message queue used for passing status from the effect.
+ */
+ @callflow(next={"setProcessBuffers"})
+ prepareForProcessing() generates (Result retval, fmq_sync<Result> statusMQ);
+
+ /**
+ * Set up input and output buffers for processing audio data. The effect
+ * may modify both the input and the output buffer during the operation.
+ * Buffers may be set multiple times during effect lifetime.
+ *
+ * The input and the output buffer may be reused between different effects,
+ * and the input buffer may be used as an output buffer. Buffers are
+ * distinguished using 'AudioBuffer.id' field.
+ *
+ * @param inBuffer input audio buffer.
+ * @param outBuffer output audio buffer.
+ * @return retval OK if both buffers were mapped successfully.
+ * INVALID_ARGUMENTS if there was a problem with mapping
+ * any of the buffers.
+ */
+ setProcessBuffers(AudioBuffer inBuffer, AudioBuffer outBuffer)
+ generates (Result retval);
+
+ /**
+ * Execute a vendor specific command on the effect. The command code
+ * and data, as well as result data are not interpreted by Android
+ * Framework and are passed as-is between the application and the effect.
+ *
+ * The effect must use standard POSIX.1-2001 error codes for the operation
+ * completion status.
+ *
+ * Use this method only if the effect is provided by a third party, and
+ * there is no interface defined for it. This method only works for effects
+ * implemented in software.
+ *
+ * @param commandId the ID of the command.
+ * @param data command data.
+ * @param resultMaxSize maximum size in bytes of the result; can be 0.
+ * @return status command completion status.
+ * @return result result data.
+ */
+ command(uint32_t commandId, vec<uint8_t> data, uint32_t resultMaxSize)
+ generates (int32_t status, vec<uint8_t> result);
+
+ /**
+ * Set a vendor-specific parameter and apply it immediately. The parameter
+ * code and data are not interpreted by Android Framework and are passed
+ * as-is between the application and the effect.
+ *
+ * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+ * unknown or if provided parameter data is invalid. If the effect does not
+ * support setting vendor-specific parameters, it must return NOT_SUPPORTED.
+ *
+ * Use this method only if the effect is provided by a third party, and
+ * there is no interface defined for it. This method only works for effects
+ * implemented in software.
+ *
+ * @param parameter identifying data of the parameter.
+ * @param value the value of the parameter.
+ * @return retval operation completion status.
+ */
+ setParameter(vec<uint8_t> parameter, vec<uint8_t> value)
+ generates (Result retval);
+
+ /**
+ * Get a vendor-specific parameter value. The parameter code and returned
+ * data are not interpreted by Android Framework and are passed as-is
+ * between the application and the effect.
+ *
+ * The effect must use INVALID_ARGUMENTS return code if the parameter ID is
+ * unknown. If the effect does not support setting vendor-specific
+ * parameters, it must return NOT_SUPPORTED.
+ *
+ * Use this method only if the effect is provided by a third party, and
+ * there is no interface defined for it. This method only works for effects
+ * implemented in software.
+ *
+ * @param parameter identifying data of the parameter.
+ * @param valueMaxSize maximum size in bytes of the value.
+ * @return retval operation completion status.
+ * @return result the value of the parameter.
+ */
+ getParameter(vec<uint8_t> parameter, uint32_t valueMaxSize)
+ generates (Result retval, vec<uint8_t> value);
+
+ /**
+ * Get supported configs for a vendor-specific feature. The configs returned
+ * are not interpreted by Android Framework and are passed as-is between the
+ * application and the effect.
+ *
+ * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+ * unknown. If the effect does not support getting vendor-specific feature
+ * configs, it must return NOT_SUPPORTED. If the feature is supported but
+ * the total number of supported configurations exceeds the maximum number
+ * indicated by the caller, the method must return RESULT_TOO_BIG.
+ *
+ * Use this method only if the effect is provided by a third party, and
+ * there is no interface defined for it. This method only works for effects
+ * implemented in software.
+ *
+ * @param featureId feature identifier.
+ * @param maxConfigs maximum number of configs to return.
+ * @param configSize size of each config in bytes.
+ * @return retval operation completion status.
+ * @return configsCount number of configs returned.
+ * @return configsData data for all the configs returned.
+ */
+ getSupportedConfigsForFeature(
+ uint32_t featureId,
+ uint32_t maxConfigs,
+ uint32_t configSize) generates (
+ Result retval,
+ uint32_t configsCount,
+ vec<uint8_t> configsData);
+
+ /**
+ * Get the current config for a vendor-specific feature. The config returned
+ * is not interpreted by Android Framework and is passed as-is between the
+ * application and the effect.
+ *
+ * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+ * unknown. If the effect does not support getting vendor-specific
+ * feature configs, it must return NOT_SUPPORTED.
+ *
+ * Use this method only if the effect is provided by a third party, and
+ * there is no interface defined for it. This method only works for effects
+ * implemented in software.
+ *
+ * @param featureId feature identifier.
+ * @param configSize size of the config in bytes.
+ * @return retval operation completion status.
+ * @return configData config data.
+ */
+ getCurrentConfigForFeature(uint32_t featureId, uint32_t configSize)
+ generates (Result retval, vec<uint8_t> configData);
+
+ /**
+ * Set the current config for a vendor-specific feature. The config data
+ * is not interpreted by Android Framework and is passed as-is between the
+ * application and the effect.
+ *
+ * The effect must use INVALID_ARGUMENTS return code if the feature ID is
+ * unknown. If the effect does not support getting vendor-specific
+ * feature configs, it must return NOT_SUPPORTED.
+ *
+ * Use this method only if the effect is provided by a third party, and
+ * there is no interface defined for it. This method only works for effects
+ * implemented in software.
+ *
+ * @param featureId feature identifier.
+ * @param configData config data.
+ * @return retval operation completion status.
+ */
+ setCurrentConfigForFeature(uint32_t featureId, vec<uint8_t> configData)
+ generates (Result retval);
+
+ /**
+ * Called by the framework to deinitialize the effect and free up
+ * all the currently allocated resources. It is recommended to close
+ * the effect on the client side as soon as it is becomes unused.
+ *
+ * @return retval OK in case the success.
+ * INVALID_STATE if the effect was already closed.
+ */
+ @exit
+ close() generates (Result retval);
+};
diff --git a/audio/effect/6.0/IEffectBufferProviderCallback.hal b/audio/effect/6.0/IEffectBufferProviderCallback.hal
new file mode 100644
index 0000000..097528d
--- /dev/null
+++ b/audio/effect/6.0/IEffectBufferProviderCallback.hal
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+/**
+ * This callback interface contains functions that can be used by the effect
+ * engine 'process' function to exchange input and output audio buffers.
+ */
+interface IEffectBufferProviderCallback {
+ /**
+ * Called to retrieve a buffer where data should read from by 'process'
+ * function.
+ *
+ * @return buffer audio buffer for processing
+ */
+ getBuffer() generates (AudioBuffer buffer);
+
+ /**
+ * Called to provide a buffer with the data written by 'process' function.
+ *
+ * @param buffer audio buffer for processing
+ */
+ putBuffer(AudioBuffer buffer);
+};
diff --git a/audio/effect/6.0/IEffectsFactory.hal b/audio/effect/6.0/IEffectsFactory.hal
new file mode 100644
index 0000000..e08b2de
--- /dev/null
+++ b/audio/effect/6.0/IEffectsFactory.hal
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IEffectsFactory {
+ /**
+ * Returns descriptors of different effects in all loaded libraries.
+ *
+ * @return retval operation completion status.
+ * @return result list of effect descriptors.
+ */
+ getAllDescriptors() generates(Result retval, vec<EffectDescriptor> result);
+
+ /**
+ * Returns a descriptor of a particular effect.
+ *
+ * @return retval operation completion status.
+ * @return result effect descriptor.
+ */
+ getDescriptor(Uuid uid) generates(Result retval, EffectDescriptor result);
+
+ /**
+ * Creates an effect engine of the specified type. To release the effect
+ * engine, it is necessary to release references to the returned effect
+ * object.
+ *
+ * @param uid effect uuid.
+ * @param session audio session to which this effect instance will be
+ * attached. All effects created with the same session ID
+ * are connected in series and process the same signal
+ * stream.
+ * @param ioHandle identifies the output or input stream this effect is
+ * directed to in audio HAL.
+ * @return retval operation completion status.
+ * @return result the interface for the created effect.
+ * @return effectId the unique ID of the effect to be used with
+ * IStream::addEffect and IStream::removeEffect methods.
+ */
+ createEffect(Uuid uid, AudioSession session, AudioIoHandle ioHandle)
+ generates (Result retval, IEffect result, uint64_t effectId);
+};
diff --git a/audio/effect/6.0/IEnvironmentalReverbEffect.hal b/audio/effect/6.0/IEnvironmentalReverbEffect.hal
new file mode 100644
index 0000000..8887533
--- /dev/null
+++ b/audio/effect/6.0/IEnvironmentalReverbEffect.hal
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IEnvironmentalReverbEffect extends IEffect {
+ /**
+ * Sets whether the effect should be bypassed.
+ */
+ setBypass(bool bypass) generates (Result retval);
+
+ /**
+ * Gets whether the effect should be bypassed.
+ */
+ getBypass() generates (Result retval, bool bypass);
+
+ enum ParamRange : int16_t {
+ ROOM_LEVEL_MIN = -6000,
+ ROOM_LEVEL_MAX = 0,
+ ROOM_HF_LEVEL_MIN = -4000,
+ ROOM_HF_LEVEL_MAX = 0,
+ DECAY_TIME_MIN = 100,
+ DECAY_TIME_MAX = 20000,
+ DECAY_HF_RATIO_MIN = 100,
+ DECAY_HF_RATIO_MAX = 1000,
+ REFLECTIONS_LEVEL_MIN = -6000,
+ REFLECTIONS_LEVEL_MAX = 0,
+ REFLECTIONS_DELAY_MIN = 0,
+ REFLECTIONS_DELAY_MAX = 65,
+ REVERB_LEVEL_MIN = -6000,
+ REVERB_LEVEL_MAX = 0,
+ REVERB_DELAY_MIN = 0,
+ REVERB_DELAY_MAX = 65,
+ DIFFUSION_MIN = 0,
+ DIFFUSION_MAX = 1000,
+ DENSITY_MIN = 0,
+ DENSITY_MAX = 1000
+ };
+
+ /**
+ * Sets the room level.
+ */
+ setRoomLevel(int16_t roomLevel) generates (Result retval);
+
+ /**
+ * Gets the room level.
+ */
+ getRoomLevel() generates (Result retval, int16_t roomLevel);
+
+ /**
+ * Sets the room high frequencies level.
+ */
+ setRoomHfLevel(int16_t roomHfLevel) generates (Result retval);
+
+ /**
+ * Gets the room high frequencies level.
+ */
+ getRoomHfLevel() generates (Result retval, int16_t roomHfLevel);
+
+ /**
+ * Sets the room decay time.
+ */
+ setDecayTime(uint32_t decayTime) generates (Result retval);
+
+ /**
+ * Gets the room decay time.
+ */
+ getDecayTime() generates (Result retval, uint32_t decayTime);
+
+ /**
+ * Sets the ratio of high frequencies decay.
+ */
+ setDecayHfRatio(int16_t decayHfRatio) generates (Result retval);
+
+ /**
+ * Gets the ratio of high frequencies decay.
+ */
+ getDecayHfRatio() generates (Result retval, int16_t decayHfRatio);
+
+ /**
+ * Sets the level of reflections in the room.
+ */
+ setReflectionsLevel(int16_t reflectionsLevel) generates (Result retval);
+
+ /**
+ * Gets the level of reflections in the room.
+ */
+ getReflectionsLevel() generates (Result retval, int16_t reflectionsLevel);
+
+ /**
+ * Sets the reflections delay in the room.
+ */
+ setReflectionsDelay(uint32_t reflectionsDelay) generates (Result retval);
+
+ /**
+ * Gets the reflections delay in the room.
+ */
+ getReflectionsDelay() generates (Result retval, uint32_t reflectionsDelay);
+
+ /**
+ * Sets the reverb level of the room.
+ */
+ setReverbLevel(int16_t reverbLevel) generates (Result retval);
+
+ /**
+ * Gets the reverb level of the room.
+ */
+ getReverbLevel() generates (Result retval, int16_t reverbLevel);
+
+ /**
+ * Sets the reverb delay of the room.
+ */
+ setReverbDelay(uint32_t reverDelay) generates (Result retval);
+
+ /**
+ * Gets the reverb delay of the room.
+ */
+ getReverbDelay() generates (Result retval, uint32_t reverbDelay);
+
+ /**
+ * Sets room diffusion.
+ */
+ setDiffusion(int16_t diffusion) generates (Result retval);
+
+ /**
+ * Gets room diffusion.
+ */
+ getDiffusion() generates (Result retval, int16_t diffusion);
+
+ /**
+ * Sets room wall density.
+ */
+ setDensity(int16_t density) generates (Result retval);
+
+ /**
+ * Gets room wall density.
+ */
+ getDensity() generates (Result retval, int16_t density);
+
+ struct AllProperties {
+ int16_t roomLevel; // in millibels, range -6000 to 0
+ int16_t roomHfLevel; // in millibels, range -4000 to 0
+ uint32_t decayTime; // in milliseconds, range 100 to 20000
+ int16_t decayHfRatio; // in permilles, range 100 to 1000
+ int16_t reflectionsLevel; // in millibels, range -6000 to 0
+ uint32_t reflectionsDelay; // in milliseconds, range 0 to 65
+ int16_t reverbLevel; // in millibels, range -6000 to 0
+ uint32_t reverbDelay; // in milliseconds, range 0 to 65
+ int16_t diffusion; // in permilles, range 0 to 1000
+ int16_t density; // in permilles, range 0 to 1000
+ };
+
+ /**
+ * Sets all properties at once.
+ */
+ setAllProperties(AllProperties properties) generates (Result retval);
+
+ /**
+ * Gets all properties at once.
+ */
+ getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/6.0/IEqualizerEffect.hal b/audio/effect/6.0/IEqualizerEffect.hal
new file mode 100644
index 0000000..962d518
--- /dev/null
+++ b/audio/effect/6.0/IEqualizerEffect.hal
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IEqualizerEffect extends IEffect {
+ /**
+ * Gets the number of frequency bands that the equalizer supports.
+ */
+ getNumBands() generates (Result retval, uint16_t numBands);
+
+ /**
+ * Returns the minimum and maximum band levels supported.
+ */
+ getLevelRange()
+ generates (Result retval, int16_t minLevel, int16_t maxLevel);
+
+ /**
+ * Sets the gain for the given equalizer band.
+ */
+ setBandLevel(uint16_t band, int16_t level) generates (Result retval);
+
+ /**
+ * Gets the gain for the given equalizer band.
+ */
+ getBandLevel(uint16_t band) generates (Result retval, int16_t level);
+
+ /**
+ * Gets the center frequency of the given band, in milliHertz.
+ */
+ getBandCenterFrequency(uint16_t band)
+ generates (Result retval, uint32_t centerFreqmHz);
+
+ /**
+ * Gets the frequency range of the given frequency band, in milliHertz.
+ */
+ getBandFrequencyRange(uint16_t band)
+ generates (Result retval, uint32_t minFreqmHz, uint32_t maxFreqmHz);
+
+ /**
+ * Gets the band that has the most effect on the given frequency
+ * in milliHertz.
+ */
+ getBandForFrequency(uint32_t freqmHz)
+ generates (Result retval, uint16_t band);
+
+ /**
+ * Gets the names of all presets the equalizer supports.
+ */
+ getPresetNames() generates (Result retval, vec<string> names);
+
+ /**
+ * Sets the current preset using the index of the preset in the names
+ * vector returned via 'getPresetNames'.
+ */
+ setCurrentPreset(uint16_t preset) generates (Result retval);
+
+ /**
+ * Gets the current preset.
+ */
+ getCurrentPreset() generates (Result retval, uint16_t preset);
+
+ struct AllProperties {
+ uint16_t curPreset;
+ vec<int16_t> bandLevels;
+ };
+
+ /**
+ * Sets all properties at once.
+ */
+ setAllProperties(AllProperties properties) generates (Result retval);
+
+ /**
+ * Gets all properties at once.
+ */
+ getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/6.0/ILoudnessEnhancerEffect.hal b/audio/effect/6.0/ILoudnessEnhancerEffect.hal
new file mode 100644
index 0000000..73dc818
--- /dev/null
+++ b/audio/effect/6.0/ILoudnessEnhancerEffect.hal
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface ILoudnessEnhancerEffect extends IEffect {
+ /**
+ * Sets target gain expressed in millibels.
+ */
+ setTargetGain(int32_t targetGainMb) generates (Result retval);
+
+ /**
+ * Gets target gain expressed in millibels.
+ */
+ getTargetGain() generates (Result retval, int32_t targetGainMb);
+};
diff --git a/audio/effect/6.0/INoiseSuppressionEffect.hal b/audio/effect/6.0/INoiseSuppressionEffect.hal
new file mode 100644
index 0000000..16dee57
--- /dev/null
+++ b/audio/effect/6.0/INoiseSuppressionEffect.hal
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface INoiseSuppressionEffect extends IEffect {
+ enum Level : int32_t {
+ LOW,
+ MEDIUM,
+ HIGH
+ };
+
+ /**
+ * Sets suppression level.
+ */
+ setSuppressionLevel(Level level) generates (Result retval);
+
+ /**
+ * Gets suppression level.
+ */
+ getSuppressionLevel() generates (Result retval, Level level);
+
+ enum Type : int32_t {
+ SINGLE_CHANNEL,
+ MULTI_CHANNEL
+ };
+
+ /**
+ * Set suppression type.
+ */
+ setSuppressionType(Type type) generates (Result retval);
+
+ /**
+ * Get suppression type.
+ */
+ getSuppressionType() generates (Result retval, Type type);
+
+ struct AllProperties {
+ Level level;
+ Type type;
+ };
+
+ /**
+ * Sets all properties at once.
+ */
+ setAllProperties(AllProperties properties) generates (Result retval);
+
+ /**
+ * Gets all properties at once.
+ */
+ getAllProperties() generates (Result retval, AllProperties properties);
+};
diff --git a/audio/effect/6.0/IPresetReverbEffect.hal b/audio/effect/6.0/IPresetReverbEffect.hal
new file mode 100644
index 0000000..d00c8af
--- /dev/null
+++ b/audio/effect/6.0/IPresetReverbEffect.hal
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IPresetReverbEffect extends IEffect {
+ enum Preset : int32_t {
+ NONE, // no reverb or reflections
+ SMALLROOM, // a small room less than five meters in length
+ MEDIUMROOM, // a medium room with a length of ten meters or less
+ LARGEROOM, // a large-sized room suitable for live performances
+ MEDIUMHALL, // a medium-sized hall
+ LARGEHALL, // a large-sized hall suitable for a full orchestra
+ PLATE, // synthesis of the traditional plate reverb
+ LAST = PLATE
+ };
+
+ /**
+ * Sets the current preset.
+ */
+ setPreset(Preset preset) generates (Result retval);
+
+ /**
+ * Gets the current preset.
+ */
+ getPreset() generates (Result retval, Preset preset);
+};
diff --git a/audio/effect/6.0/IVirtualizerEffect.hal b/audio/effect/6.0/IVirtualizerEffect.hal
new file mode 100644
index 0000000..5967b33
--- /dev/null
+++ b/audio/effect/6.0/IVirtualizerEffect.hal
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IVirtualizerEffect extends IEffect {
+ /**
+ * Returns whether setting virtualization strength is supported.
+ */
+ isStrengthSupported() generates (bool strengthSupported);
+
+ enum StrengthRange : uint16_t {
+ MIN = 0,
+ MAX = 1000
+ };
+
+ /**
+ * Sets virtualization strength.
+ *
+ * @param strength strength of the effect. The valid range for strength
+ * strength is [0, 1000], where 0 per mille designates the
+ * mildest effect and 1000 per mille designates the
+ * strongest.
+ * @return retval operation completion status.
+ */
+ setStrength(uint16_t strength) generates (Result retval);
+
+ /**
+ * Gets virtualization strength.
+ */
+ getStrength() generates (Result retval, uint16_t strength);
+
+ struct SpeakerAngle {
+ /** Speaker channel mask */
+ bitfield<AudioChannelMask> mask;
+ // all angles are expressed in degrees and
+ // are relative to the listener.
+ int16_t azimuth; // 0 is the direction the listener faces
+ // 180 is behind the listener
+ // -90 is to their left
+ int16_t elevation; // 0 is the horizontal plane
+ // +90 is above the listener, -90 is below
+ };
+ /**
+ * Retrieves virtual speaker angles for the given channel mask on the
+ * specified device.
+ */
+ getVirtualSpeakerAngles(bitfield<AudioChannelMask> mask, AudioDevice device)
+ generates (Result retval, vec<SpeakerAngle> speakerAngles);
+
+ /**
+ * Forces the virtualizer effect for the given output device.
+ */
+ forceVirtualizationMode(AudioDevice device) generates (Result retval);
+
+ /**
+ * Returns audio device reflecting the current virtualization mode,
+ * AUDIO_DEVICE_NONE when not virtualizing.
+ */
+ getVirtualizationMode() generates (Result retval, AudioDevice device);
+};
diff --git a/audio/effect/6.0/IVisualizerEffect.hal b/audio/effect/6.0/IVisualizerEffect.hal
new file mode 100644
index 0000000..3df3e6f
--- /dev/null
+++ b/audio/effect/6.0/IVisualizerEffect.hal
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+import IEffect;
+
+interface IVisualizerEffect extends IEffect {
+ enum CaptureSizeRange : int32_t {
+ MAX = 1024, // maximum capture size in samples
+ MIN = 128 // minimum capture size in samples
+ };
+
+ /**
+ * Sets the number PCM samples in the capture.
+ */
+ setCaptureSize(uint16_t captureSize) generates (Result retval);
+
+ /**
+ * Gets the number PCM samples in the capture.
+ */
+ getCaptureSize() generates (Result retval, uint16_t captureSize);
+
+ enum ScalingMode : int32_t {
+ // Keep in sync with SCALING_MODE_... in
+ // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+ NORMALIZED = 0,
+ AS_PLAYED = 1
+ };
+
+ /**
+ * Specifies the way the captured data is scaled.
+ */
+ setScalingMode(ScalingMode scalingMode) generates (Result retval);
+
+ /**
+ * Retrieves the way the captured data is scaled.
+ */
+ getScalingMode() generates (Result retval, ScalingMode scalingMode);
+
+ /**
+ * Informs the visualizer about the downstream latency.
+ */
+ setLatency(uint32_t latencyMs) generates (Result retval);
+
+ /**
+ * Gets the downstream latency.
+ */
+ getLatency() generates (Result retval, uint32_t latencyMs);
+
+ enum MeasurementMode : int32_t {
+ // Keep in sync with MEASUREMENT_MODE_... in
+ // frameworks/base/media/java/android/media/audiofx/Visualizer.java
+ NONE = 0x0,
+ PEAK_RMS = 0x1
+ };
+
+ /**
+ * Specifies which measurements are to be made.
+ */
+ setMeasurementMode(MeasurementMode measurementMode)
+ generates (Result retval);
+
+ /**
+ * Retrieves which measurements are to be made.
+ */
+ getMeasurementMode() generates (
+ Result retval, MeasurementMode measurementMode);
+
+ /**
+ * Retrieves the latest PCM snapshot captured by the visualizer engine. The
+ * number of samples to capture is specified by 'setCaptureSize' parameter.
+ *
+ * @return retval operation completion status.
+ * @return samples samples in 8 bit unsigned format (0 = 0x80)
+ */
+ capture() generates (Result retval, vec<uint8_t> samples);
+
+ struct Measurement {
+ MeasurementMode mode; // discriminator
+ union Values {
+ struct PeakAndRms {
+ int32_t peakMb; // millibels
+ int32_t rmsMb; // millibels
+ } peakAndRms;
+ } value;
+ };
+ /**
+ * Retrieves the latest measurements. The measurements to be made
+ * are specified by 'setMeasurementMode' parameter.
+ *
+ * @return retval operation completion status.
+ * @return result measurement.
+ */
+ measure() generates (Result retval, Measurement result);
+};
diff --git a/audio/effect/6.0/types.hal b/audio/effect/6.0/types.hal
new file mode 100644
index 0000000..dd5a4ad
--- /dev/null
+++ b/audio/effect/6.0/types.hal
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio.effect@6.0;
+
+import android.hardware.audio.common@6.0;
+
+enum Result : int32_t {
+ OK,
+ NOT_INITIALIZED,
+ INVALID_ARGUMENTS,
+ INVALID_STATE,
+ NOT_SUPPORTED,
+ RESULT_TOO_BIG
+};
+
+/**
+ * Effect engine capabilities/requirements flags.
+ *
+ * Definitions for flags field of effect descriptor.
+ *
+ * +----------------+--------+--------------------------------------------------
+ * | description | bits | values
+ * +----------------+--------+--------------------------------------------------
+ * | connection | 0..2 | 0 insert: after track process
+ * | mode | | 1 auxiliary: connect to track auxiliary
+ * | | | output and use send level
+ * | | | 2 replace: replaces track process function;
+ * | | | must implement SRC, volume and mono to stereo.
+ * | | | 3 pre processing: applied below audio HAL on in
+ * | | | 4 post processing: applied below audio HAL on out
+ * | | | 5 - 7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | insertion | 3..5 | 0 none
+ * | preference | | 1 first of the chain
+ * | | | 2 last of the chain
+ * | | | 3 exclusive (only effect in the insert chain)
+ * | | | 4..7 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Volume | 6..8 | 0 none
+ * | management | | 1 implements volume control
+ * | | | 2 requires volume indication
+ * | | | 3 monitors requested volume
+ * | | | 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Device | 9..11 | 0 none
+ * | indication | | 1 requires device updates
+ * | | | 2, 4 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Sample input | 12..13 | 1 direct: process() function or
+ * | mode | | EFFECT_CMD_SET_CONFIG command must specify
+ * | | | a buffer descriptor
+ * | | | 2 provider: process() function uses the
+ * | | | bufferProvider indicated by the
+ * | | | EFFECT_CMD_SET_CONFIG command to request input.
+ * | | | buffers.
+ * | | | 3 both: both input modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Sample output | 14..15 | 1 direct: process() function or
+ * | mode | | EFFECT_CMD_SET_CONFIG command must specify
+ * | | | a buffer descriptor
+ * | | | 2 provider: process() function uses the
+ * | | | bufferProvider indicated by the
+ * | | | EFFECT_CMD_SET_CONFIG command to request output
+ * | | | buffers.
+ * | | | 3 both: both output modes are supported
+ * +----------------+--------+--------------------------------------------------
+ * | Hardware | 16..17 | 0 No hardware acceleration
+ * | acceleration | | 1 non tunneled hw acceleration: the process()
+ * | | | function reads the samples, send them to HW
+ * | | | accelerated effect processor, reads back
+ * | | | the processed samples and returns them
+ * | | | to the output buffer.
+ * | | | 2 tunneled hw acceleration: the process()
+ * | | | function is transparent. The effect interface
+ * | | | is only used to control the effect engine.
+ * | | | This mode is relevant for global effects
+ * | | | actually applied by the audio hardware on
+ * | | | the output stream.
+ * +----------------+--------+--------------------------------------------------
+ * | Audio Mode | 18..19 | 0 none
+ * | indication | | 1 requires audio mode updates
+ * | | | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Audio source | 20..21 | 0 none
+ * | indication | | 1 requires audio source updates
+ * | | | 2..3 reserved
+ * +----------------+--------+--------------------------------------------------
+ * | Effect offload | 22 | 0 The effect cannot be offloaded to an audio DSP
+ * | supported | | 1 The effect can be offloaded to an audio DSP
+ * +----------------+--------+--------------------------------------------------
+ * | Process | 23 | 0 The effect implements a process function.
+ * | function | | 1 The effect does not implement a process
+ * | not | | function: enabling the effect has no impact
+ * | implemented | | on latency or CPU load.
+ * | | | Effect implementations setting this flag do not
+ * | | | have to implement a process function.
+ * +----------------+--------+--------------------------------------------------
+ */
+@export(name="", value_prefix="EFFECT_FLAG_")
+enum EffectFlags : int32_t {
+ // Insert mode
+ TYPE_SHIFT = 0,
+ TYPE_SIZE = 3,
+ TYPE_MASK = ((1 << TYPE_SIZE) -1) << TYPE_SHIFT,
+ TYPE_INSERT = 0 << TYPE_SHIFT,
+ TYPE_AUXILIARY = 1 << TYPE_SHIFT,
+ TYPE_REPLACE = 2 << TYPE_SHIFT,
+ TYPE_PRE_PROC = 3 << TYPE_SHIFT,
+ TYPE_POST_PROC = 4 << TYPE_SHIFT,
+
+ // Insert preference
+ INSERT_SHIFT = TYPE_SHIFT + TYPE_SIZE,
+ INSERT_SIZE = 3,
+ INSERT_MASK = ((1 << INSERT_SIZE) -1) << INSERT_SHIFT,
+ INSERT_ANY = 0 << INSERT_SHIFT,
+ INSERT_FIRST = 1 << INSERT_SHIFT,
+ INSERT_LAST = 2 << INSERT_SHIFT,
+ INSERT_EXCLUSIVE = 3 << INSERT_SHIFT,
+
+ // Volume control
+ VOLUME_SHIFT = INSERT_SHIFT + INSERT_SIZE,
+ VOLUME_SIZE = 3,
+ VOLUME_MASK = ((1 << VOLUME_SIZE) -1) << VOLUME_SHIFT,
+ VOLUME_CTRL = 1 << VOLUME_SHIFT,
+ VOLUME_IND = 2 << VOLUME_SHIFT,
+ VOLUME_MONITOR = 3 << VOLUME_SHIFT,
+ VOLUME_NONE = 0 << VOLUME_SHIFT,
+
+ // Device indication
+ DEVICE_SHIFT = VOLUME_SHIFT + VOLUME_SIZE,
+ DEVICE_SIZE = 3,
+ DEVICE_MASK = ((1 << DEVICE_SIZE) -1) << DEVICE_SHIFT,
+ DEVICE_IND = 1 << DEVICE_SHIFT,
+ DEVICE_NONE = 0 << DEVICE_SHIFT,
+
+ // Sample input modes
+ INPUT_SHIFT = DEVICE_SHIFT + DEVICE_SIZE,
+ INPUT_SIZE = 2,
+ INPUT_MASK = ((1 << INPUT_SIZE) -1) << INPUT_SHIFT,
+ INPUT_DIRECT = 1 << INPUT_SHIFT,
+ INPUT_PROVIDER = 2 << INPUT_SHIFT,
+ INPUT_BOTH = 3 << INPUT_SHIFT,
+
+ // Sample output modes
+ OUTPUT_SHIFT = INPUT_SHIFT + INPUT_SIZE,
+ OUTPUT_SIZE = 2,
+ OUTPUT_MASK = ((1 << OUTPUT_SIZE) -1) << OUTPUT_SHIFT,
+ OUTPUT_DIRECT = 1 << OUTPUT_SHIFT,
+ OUTPUT_PROVIDER = 2 << OUTPUT_SHIFT,
+ OUTPUT_BOTH = 3 << OUTPUT_SHIFT,
+
+ // Hardware acceleration mode
+ HW_ACC_SHIFT = OUTPUT_SHIFT + OUTPUT_SIZE,
+ HW_ACC_SIZE = 2,
+ HW_ACC_MASK = ((1 << HW_ACC_SIZE) -1) << HW_ACC_SHIFT,
+ HW_ACC_SIMPLE = 1 << HW_ACC_SHIFT,
+ HW_ACC_TUNNEL = 2 << HW_ACC_SHIFT,
+
+ // Audio mode indication
+ AUDIO_MODE_SHIFT = HW_ACC_SHIFT + HW_ACC_SIZE,
+ AUDIO_MODE_SIZE = 2,
+ AUDIO_MODE_MASK = ((1 << AUDIO_MODE_SIZE) -1) << AUDIO_MODE_SHIFT,
+ AUDIO_MODE_IND = 1 << AUDIO_MODE_SHIFT,
+ AUDIO_MODE_NONE = 0 << AUDIO_MODE_SHIFT,
+
+ // Audio source indication
+ AUDIO_SOURCE_SHIFT = AUDIO_MODE_SHIFT + AUDIO_MODE_SIZE,
+ AUDIO_SOURCE_SIZE = 2,
+ AUDIO_SOURCE_MASK = ((1 << AUDIO_SOURCE_SIZE) -1) << AUDIO_SOURCE_SHIFT,
+ AUDIO_SOURCE_IND = 1 << AUDIO_SOURCE_SHIFT,
+ AUDIO_SOURCE_NONE = 0 << AUDIO_SOURCE_SHIFT,
+
+ // Effect offload indication
+ OFFLOAD_SHIFT = AUDIO_SOURCE_SHIFT + AUDIO_SOURCE_SIZE,
+ OFFLOAD_SIZE = 1,
+ OFFLOAD_MASK = ((1 << OFFLOAD_SIZE) -1) << OFFLOAD_SHIFT,
+ OFFLOAD_SUPPORTED = 1 << OFFLOAD_SHIFT,
+
+ // Effect has no process indication
+ NO_PROCESS_SHIFT = OFFLOAD_SHIFT + OFFLOAD_SIZE,
+ NO_PROCESS_SIZE = 1,
+ NO_PROCESS_MASK = ((1 << NO_PROCESS_SIZE) -1) << NO_PROCESS_SHIFT,
+ NO_PROCESS = 1 << NO_PROCESS_SHIFT
+};
+
+/**
+ * The effect descriptor contains necessary information to facilitate the
+ * enumeration of the effect engines present in a library.
+ */
+struct EffectDescriptor {
+ Uuid type; // UUID of to the OpenSL ES interface implemented
+ // by this effect
+ Uuid uuid; // UUID for this particular implementation
+ bitfield<EffectFlags> flags; // effect engine capabilities/requirements flags
+ uint16_t cpuLoad; // CPU load indication expressed in 0.1 MIPS units
+ // as estimated on an ARM9E core (ARMv5TE) with 0 WS
+ uint16_t memoryUsage; // data memory usage expressed in KB and includes
+ // only dynamically allocated memory
+ uint8_t[64] name; // human readable effect name
+ uint8_t[64] implementor; // human readable effect implementor name
+};
+
+/**
+ * A buffer is a chunk of audio data for processing. Multi-channel audio is
+ * always interleaved. The channel order is from LSB to MSB with regard to the
+ * channel mask definition in audio.h, audio_channel_mask_t, e.g.:
+ * Stereo: L, R; 5.1: FL, FR, FC, LFE, BL, BR.
+ *
+ * The buffer size is expressed in frame count, a frame being composed of
+ * samples for all channels at a given time. Frame size for unspecified format
+ * (AUDIO_FORMAT_OTHER) is 8 bit by definition.
+ */
+struct AudioBuffer {
+ uint64_t id;
+ uint32_t frameCount;
+ memory data;
+};
+
+@export(name="effect_buffer_access_e", value_prefix="EFFECT_BUFFER_")
+enum EffectBufferAccess : int32_t {
+ ACCESS_WRITE,
+ ACCESS_READ,
+ ACCESS_ACCUMULATE
+};
+
+/**
+ * Determines what fields of EffectBufferConfig need to be considered.
+ */
+@export(name="", value_prefix="EFFECT_CONFIG_")
+enum EffectConfigParameters : int32_t {
+ BUFFER = 0x0001, // buffer field
+ SMP_RATE = 0x0002, // samplingRate
+ CHANNELS = 0x0004, // channels
+ FORMAT = 0x0008, // format
+ ACC_MODE = 0x0010, // accessMode
+ // Note that the 2.0 ALL have been moved to an helper function
+};
+
+/**
+ * The buffer config structure specifies the input or output audio format
+ * to be used by the effect engine.
+ */
+struct EffectBufferConfig {
+ AudioBuffer buffer;
+ uint32_t samplingRateHz;
+ bitfield<AudioChannelMask> channels;
+ AudioFormat format;
+ EffectBufferAccess accessMode;
+ bitfield<EffectConfigParameters> mask;
+};
+
+struct EffectConfig {
+ EffectBufferConfig inputCfg;
+ EffectBufferConfig outputCfg;
+};
+
+@export(name="effect_feature_e", value_prefix="EFFECT_FEATURE_")
+enum EffectFeature : int32_t {
+ AUX_CHANNELS, // supports auxiliary channels
+ // (e.g. dual mic noise suppressor)
+ CNT
+};
+
+struct EffectAuxChannelsConfig {
+ bitfield<AudioChannelMask> mainChannels; // channel mask for main channels
+ bitfield<AudioChannelMask> auxChannels; // channel mask for auxiliary channels
+};
+
+struct EffectOffloadParameter {
+ bool isOffload; // true if the playback thread the effect
+ // is attached to is offloaded
+ AudioIoHandle ioHandle; // io handle of the playback thread
+ // the effect is attached to
+};
+
+/**
+ * The message queue flags used to synchronize reads and writes from
+ * the status message queue used by effects.
+ */
+enum MessageQueueFlagBits : uint32_t {
+ DONE_PROCESSING = 1 << 0,
+ REQUEST_PROCESS = 1 << 1,
+ REQUEST_PROCESS_REVERSE = 1 << 2,
+ REQUEST_QUIT = 1 << 3,
+ REQUEST_PROCESS_ALL =
+ REQUEST_PROCESS | REQUEST_PROCESS_REVERSE | REQUEST_QUIT
+};
diff --git a/audio/effect/6.0/xml/Android.bp b/audio/effect/6.0/xml/Android.bp
new file mode 100644
index 0000000..353686b
--- /dev/null
+++ b/audio/effect/6.0/xml/Android.bp
@@ -0,0 +1,6 @@
+
+xsd_config {
+ name: "audio_effects_conf_V6_0",
+ srcs: ["audio_effects_conf.xsd"],
+ package_name: "audio.effects.V6_0",
+}
diff --git a/audio/effect/6.0/xml/api/current.txt b/audio/effect/6.0/xml/api/current.txt
new file mode 100644
index 0000000..2021639
--- /dev/null
+++ b/audio/effect/6.0/xml/api/current.txt
@@ -0,0 +1,132 @@
+// Signature format: 2.0
+package audio.effects.V6_0 {
+
+ public class AudioEffectsConf {
+ ctor public AudioEffectsConf();
+ method public audio.effects.V6_0.EffectsType getEffects();
+ method public audio.effects.V6_0.LibrariesType getLibraries();
+ method public audio.effects.V6_0.AudioEffectsConf.Postprocess getPostprocess();
+ method public audio.effects.V6_0.AudioEffectsConf.Preprocess getPreprocess();
+ method public audio.effects.V6_0.VersionType getVersion();
+ method public void setEffects(audio.effects.V6_0.EffectsType);
+ method public void setLibraries(audio.effects.V6_0.LibrariesType);
+ method public void setPostprocess(audio.effects.V6_0.AudioEffectsConf.Postprocess);
+ method public void setPreprocess(audio.effects.V6_0.AudioEffectsConf.Preprocess);
+ method public void setVersion(audio.effects.V6_0.VersionType);
+ }
+
+ public static class AudioEffectsConf.Postprocess {
+ ctor public AudioEffectsConf.Postprocess();
+ method public java.util.List<audio.effects.V6_0.StreamPostprocessType> getStream();
+ }
+
+ public static class AudioEffectsConf.Preprocess {
+ ctor public AudioEffectsConf.Preprocess();
+ method public java.util.List<audio.effects.V6_0.StreamPreprocessType> getStream();
+ }
+
+ public class EffectImplType {
+ ctor public EffectImplType();
+ method public String getLibrary();
+ method public String getUuid();
+ method public void setLibrary(String);
+ method public void setUuid(String);
+ }
+
+ public class EffectProxyType extends audio.effects.V6_0.EffectType {
+ ctor public EffectProxyType();
+ method public audio.effects.V6_0.EffectImplType getLibhw();
+ method public audio.effects.V6_0.EffectImplType getLibsw();
+ method public void setLibhw(audio.effects.V6_0.EffectImplType);
+ method public void setLibsw(audio.effects.V6_0.EffectImplType);
+ }
+
+ public class EffectType extends audio.effects.V6_0.EffectImplType {
+ ctor public EffectType();
+ method public String getName();
+ method public void setName(String);
+ }
+
+ public class EffectsType {
+ ctor public EffectsType();
+ method public java.util.List<audio.effects.V6_0.EffectProxyType> getEffectProxy_optional();
+ method public java.util.List<audio.effects.V6_0.EffectType> getEffect_optional();
+ }
+
+ public class LibrariesType {
+ ctor public LibrariesType();
+ method public java.util.List<audio.effects.V6_0.LibrariesType.Library> getLibrary();
+ }
+
+ public static class LibrariesType.Library {
+ ctor public LibrariesType.Library();
+ method public String getName();
+ method public String getPath();
+ method public void setName(String);
+ method public void setPath(String);
+ }
+
+ public enum StreamInputType {
+ method public String getRawName();
+ enum_constant public static final audio.effects.V6_0.StreamInputType camcorder;
+ enum_constant public static final audio.effects.V6_0.StreamInputType mic;
+ enum_constant public static final audio.effects.V6_0.StreamInputType unprocessed;
+ enum_constant public static final audio.effects.V6_0.StreamInputType voice_call;
+ enum_constant public static final audio.effects.V6_0.StreamInputType voice_communication;
+ enum_constant public static final audio.effects.V6_0.StreamInputType voice_downlink;
+ enum_constant public static final audio.effects.V6_0.StreamInputType voice_performance;
+ enum_constant public static final audio.effects.V6_0.StreamInputType voice_recognition;
+ enum_constant public static final audio.effects.V6_0.StreamInputType voice_uplink;
+ }
+
+ public enum StreamOutputType {
+ method public String getRawName();
+ enum_constant public static final audio.effects.V6_0.StreamOutputType alarm;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType bluetooth_sco;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType dtmf;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType enforced_audible;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType music;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType notification;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType ring;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType system;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType tts;
+ enum_constant public static final audio.effects.V6_0.StreamOutputType voice_call;
+ }
+
+ public class StreamPostprocessType extends audio.effects.V6_0.StreamProcessingType {
+ ctor public StreamPostprocessType();
+ method public audio.effects.V6_0.StreamOutputType getType();
+ method public void setType(audio.effects.V6_0.StreamOutputType);
+ }
+
+ public class StreamPreprocessType extends audio.effects.V6_0.StreamProcessingType {
+ ctor public StreamPreprocessType();
+ method public audio.effects.V6_0.StreamInputType getType();
+ method public void setType(audio.effects.V6_0.StreamInputType);
+ }
+
+ public class StreamProcessingType {
+ ctor public StreamProcessingType();
+ method public java.util.List<audio.effects.V6_0.StreamProcessingType.Apply> getApply();
+ }
+
+ public static class StreamProcessingType.Apply {
+ ctor public StreamProcessingType.Apply();
+ method public String getEffect();
+ method public void setEffect(String);
+ }
+
+ public enum VersionType {
+ method public String getRawName();
+ enum_constant public static final audio.effects.V6_0.VersionType _2_0;
+ }
+
+ public class XmlParser {
+ ctor public XmlParser();
+ method public static audio.effects.V6_0.AudioEffectsConf read(java.io.InputStream) throws javax.xml.datatype.DatatypeConfigurationException, java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+ method public static String readText(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+ method public static void skip(org.xmlpull.v1.XmlPullParser) throws java.io.IOException, org.xmlpull.v1.XmlPullParserException;
+ }
+
+}
+
diff --git a/audio/effect/6.0/xml/api/last_current.txt b/audio/effect/6.0/xml/api/last_current.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/effect/6.0/xml/api/last_current.txt
diff --git a/audio/effect/6.0/xml/api/last_removed.txt b/audio/effect/6.0/xml/api/last_removed.txt
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/audio/effect/6.0/xml/api/last_removed.txt
diff --git a/audio/effect/6.0/xml/api/removed.txt b/audio/effect/6.0/xml/api/removed.txt
new file mode 100644
index 0000000..d802177
--- /dev/null
+++ b/audio/effect/6.0/xml/api/removed.txt
@@ -0,0 +1 @@
+// Signature format: 2.0
diff --git a/audio/effect/6.0/xml/audio_effects_conf.xsd b/audio/effect/6.0/xml/audio_effects_conf.xsd
new file mode 120000
index 0000000..9d85fa7
--- /dev/null
+++ b/audio/effect/6.0/xml/audio_effects_conf.xsd
@@ -0,0 +1 @@
+../../2.0/xml/audio_effects_conf.xsd
\ No newline at end of file
diff --git a/audio/effect/all-versions/default/Android.bp b/audio/effect/all-versions/default/Android.bp
index fdb12c1..d9bb78b 100644
--- a/audio/effect/all-versions/default/Android.bp
+++ b/audio/effect/all-versions/default/Android.bp
@@ -88,3 +88,18 @@
"-include common/all-versions/VersionMacro.h",
]
}
+
+cc_library_shared {
+ name: "android.hardware.audio.effect@6.0-impl",
+ defaults: ["android.hardware.audio.effect-impl_default"],
+ shared_libs: [
+ "android.hardware.audio.common@6.0",
+ "android.hardware.audio.common@6.0-util",
+ "android.hardware.audio.effect@6.0",
+ ],
+ cflags: [
+ "-DMAJOR_VERSION=6",
+ "-DMINOR_VERSION=0",
+ "-include common/all-versions/VersionMacro.h",
+ ]
+}
diff --git a/audio/effect/all-versions/vts/functional/Android.bp b/audio/effect/all-versions/vts/functional/Android.bp
index cccb5c8..edc9076 100644
--- a/audio/effect/all-versions/vts/functional/Android.bp
+++ b/audio/effect/all-versions/vts/functional/Android.bp
@@ -76,3 +76,16 @@
]
}
+cc_test {
+ name: "VtsHalAudioEffectV6_0TargetTest",
+ defaults: ["VtsHalAudioEffectTargetTest_default"],
+ static_libs: [
+ "android.hardware.audio.common@6.0",
+ "android.hardware.audio.effect@6.0",
+ ],
+ cflags: [
+ "-DMAJOR_VERSION=6",
+ "-DMINOR_VERSION=0",
+ "-include common/all-versions/VersionMacro.h",
+ ]
+}