diff --git a/usb/gadget/aidl/Android.bp b/usb/gadget/aidl/Android.bp
new file mode 100644
index 0000000..cb8560a
--- /dev/null
+++ b/usb/gadget/aidl/Android.bp
@@ -0,0 +1,37 @@
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//       http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+aidl_interface {
+    name: "android.hardware.usb.gadget",
+    vendor_available: true,
+    srcs: ["android/hardware/usb/gadget/*.aidl"],
+    stability: "vintf",
+    backend: {
+        cpp: {
+            enabled: false,
+        },
+        java: {
+            sdk_version: "module_current",
+        },
+    },
+}
diff --git a/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/GadgetFunction.aidl b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/GadgetFunction.aidl
new file mode 100644
index 0000000..c3f26d5
--- /dev/null
+++ b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/GadgetFunction.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.usb.gadget;
+@VintfStability
+parcelable GadgetFunction {
+  const long NONE = 0;
+  const long ADB = 1;
+  const long ACCESSORY = 2;
+  const long MTP = 4;
+  const long MIDI = 8;
+  const long PTP = 16;
+  const long RNDIS = 32;
+  const long AUDIO_SOURCE = 64;
+  const long NCM = 1024;
+}
diff --git a/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/IUsbGadget.aidl b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/IUsbGadget.aidl
new file mode 100644
index 0000000..ef45f8b
--- /dev/null
+++ b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/IUsbGadget.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.usb.gadget;
+@VintfStability
+interface IUsbGadget {
+  oneway void setCurrentUsbFunctions(in long functions, in android.hardware.usb.gadget.IUsbGadgetCallback callback, in long timeoutMs, long transactionId);
+  oneway void getCurrentUsbFunctions(in android.hardware.usb.gadget.IUsbGadgetCallback callback, long transactionId);
+  oneway void getUsbSpeed(in android.hardware.usb.gadget.IUsbGadgetCallback callback, long transactionId);
+  oneway void reset();
+}
diff --git a/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/IUsbGadgetCallback.aidl b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/IUsbGadgetCallback.aidl
new file mode 100644
index 0000000..8672a0c
--- /dev/null
+++ b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/IUsbGadgetCallback.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.usb.gadget;
+@VintfStability
+interface IUsbGadgetCallback {
+  oneway void getCurrentUsbFunctionsCb(in long functions, in android.hardware.usb.gadget.Status status, long transactionId);
+  oneway void getUsbSpeedCb(in android.hardware.usb.gadget.UsbSpeed speed, long transactionId);
+  oneway void setCurrentUsbFunctionsCb(in long functions, in android.hardware.usb.gadget.Status status, long transactionId);
+}
diff --git a/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/Status.aidl b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/Status.aidl
new file mode 100644
index 0000000..bdcf685
--- /dev/null
+++ b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/Status.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.usb.gadget;
+@Backing(type="int") @VintfStability
+enum Status {
+  SUCCESS = 0,
+  ERROR = 1,
+  FUNCTIONS_APPLIED = 2,
+  FUNCTIONS_NOT_APPLIED = 3,
+  CONFIGURATION_NOT_SUPPORTED = 4,
+}
diff --git a/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/UsbSpeed.aidl b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/UsbSpeed.aidl
new file mode 100644
index 0000000..0f54ee5
--- /dev/null
+++ b/usb/gadget/aidl/aidl_api/android.hardware.usb.gadget/current/android/hardware/usb/gadget/UsbSpeed.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.usb.gadget;
+@Backing(type="int") @VintfStability
+enum UsbSpeed {
+  UNKNOWN = 0,
+  LOWSPEED = 1,
+  FULLSPEED = 2,
+  HIGHSPEED = 3,
+  SUPERSPEED = 4,
+  SUPERSPEED_10Gb = 5,
+  SUPERSPEED_20Gb = 6,
+}
diff --git a/usb/gadget/aidl/android/hardware/usb/gadget/GadgetFunction.aidl b/usb/gadget/aidl/android/hardware/usb/gadget/GadgetFunction.aidl
new file mode 100644
index 0000000..18b31b8
--- /dev/null
+++ b/usb/gadget/aidl/android/hardware/usb/gadget/GadgetFunction.aidl
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.usb.gadget;
+
+@VintfStability
+parcelable GadgetFunction {
+    /**
+     * Removes all the functions and pulls down the gadget.
+     */
+    const long NONE = 0;
+    /**
+     * Android Debug Bridge function.
+     */
+    const long ADB = 1;
+    /**
+     * Android open accessory protocol function.
+     */
+    const long ACCESSORY = 2;
+    /**
+     * Media Transfer protocol function.
+     */
+    const long MTP = 4;
+    /**
+     * Peripheral mode USB Midi function.
+     */
+    const long MIDI = 8;
+    /**
+     * Picture transfer protocol function.
+     */
+    const long PTP = 16;
+    /**
+     * Tethering function.
+     */
+    const long RNDIS = 32;
+    /**
+     * AOAv2.0 - Audio Source function.
+     */
+    const long AUDIO_SOURCE = 64;
+    /**
+     * NCM - NCM function.
+     */
+    const long NCM = 1024;
+}
diff --git a/usb/gadget/aidl/android/hardware/usb/gadget/IUsbGadget.aidl b/usb/gadget/aidl/android/hardware/usb/gadget/IUsbGadget.aidl
new file mode 100644
index 0000000..658f11b
--- /dev/null
+++ b/usb/gadget/aidl/android/hardware/usb/gadget/IUsbGadget.aidl
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.usb.gadget;
+
+import android.hardware.usb.gadget.GadgetFunction;
+import android.hardware.usb.gadget.IUsbGadgetCallback;
+
+@VintfStability
+oneway interface IUsbGadget {
+    /**
+     * This function is used to set the current USB gadget configuration.
+     * Usb gadget needs to teared down if an USB configuration is already
+     * active.
+     *
+     * @param functions The GadgetFunction bitmap. See GadgetFunction for
+     *                  the value of each bit.
+     * @param callback IUsbGadgetCallback::setCurrentUsbFunctionsCb used to
+     *                 propagate back the status.
+     * @param timeoutMs The maximum time (in milliseconds) within which the
+     *                IUsbGadgetCallback needs to be returned.
+     * @param transactionId ID to be used when invoking the callback.
+     *
+     */
+    void setCurrentUsbFunctions(in long functions, in IUsbGadgetCallback callback,
+            in long timeoutMs, long transactionId);
+
+    /**
+     * This function is used to query the USB functions included in the
+     * current USB configuration.
+     *
+     * @param callback IUsbGadgetCallback::getCurrentUsbFunctionsCb used to
+     *                 propagate the current functions list.
+     * @param transactionId ID to be used when invoking the callback.
+     */
+    void getCurrentUsbFunctions(in IUsbGadgetCallback callback, long transactionId);
+
+    /**
+     * The function is used to query current USB speed.
+     *
+     * @param callback IUsbGadgetCallback::getUsbSpeedCb used to propagate
+     *                 current USB speed.
+     * @param transactionId ID to be used when invoking the callback.
+     */
+    void getUsbSpeed(in IUsbGadgetCallback callback, long transactionId);
+
+    /**
+     * This function is used to reset USB gadget driver.
+     * Performs USB data connection reset. The connection will disconnect and
+     * reconnect.
+     */
+    void reset();
+}
diff --git a/usb/gadget/aidl/android/hardware/usb/gadget/IUsbGadgetCallback.aidl b/usb/gadget/aidl/android/hardware/usb/gadget/IUsbGadgetCallback.aidl
new file mode 100644
index 0000000..75ff02b
--- /dev/null
+++ b/usb/gadget/aidl/android/hardware/usb/gadget/IUsbGadgetCallback.aidl
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.usb.gadget;
+
+import android.hardware.usb.gadget.GadgetFunction;
+import android.hardware.usb.gadget.Status;
+import android.hardware.usb.gadget.UsbSpeed;
+
+@VintfStability
+oneway interface IUsbGadgetCallback {
+    /**
+     * Callback function used to propagate the current USB gadget
+     * configuration.
+     * @param functions The GadgetFunction bitmap. See GadgetFunction for
+     *                  the value of each bit.
+     * @param status FUNCTIONS_APPLIED when list of functions have been
+     *                                 applied.
+     *               FUNCTIONS_NOT_APPLIED when the functions have not
+     *                                     been applied.
+     *               ERROR otherwise.
+     * @param transactionId ID to be used when invoking the callback.
+     */
+    void getCurrentUsbFunctionsCb(in long functions, in Status status, long transactionId);
+
+    /**
+     * Used to convey the current USB speed to the caller.
+     * Must be called either when USB state changes due to USB enumeration or
+     * when caller requested for USB speed through getUsbSpeed.
+     *
+     * @param speed USB Speed defined by UsbSpeed showed current USB
+     *              connection speed.
+     * @param transactionId ID to be used when invoking the callback.
+     */
+    void getUsbSpeedCb(in UsbSpeed speed, long transactionId);
+
+    /**
+     * Callback function used to propagate the status of configuration
+     * switch to the caller.
+     *
+     * @param functions list of functions defined by GadgetFunction
+     *                  included in the current USB gadget composition.
+     * @param status SUCCESS when the functions are applied.
+     *               FUNCTIONS_NOT_SUPPORTED when the configuration is
+     *                                       not supported.
+     *               ERROR otherwise.
+     * @param transactionId ID to be used when invoking the callback.
+     */
+    void setCurrentUsbFunctionsCb(in long functions, in Status status, long transactionId);
+}
diff --git a/usb/gadget/aidl/android/hardware/usb/gadget/Status.aidl b/usb/gadget/aidl/android/hardware/usb/gadget/Status.aidl
new file mode 100644
index 0000000..8d8c3e3
--- /dev/null
+++ b/usb/gadget/aidl/android/hardware/usb/gadget/Status.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.usb.gadget;
+
+@VintfStability
+@Backing(type="int")
+enum Status {
+    SUCCESS = 0,
+    /**
+     * Error value when the HAL operation fails for reasons not listed here.
+     */
+    ERROR = 1,
+    /**
+     * USB configuration applied successfully.
+     */
+    FUNCTIONS_APPLIED = 2,
+    /**
+     * USB confgiuration failed to apply.
+     */
+    FUNCTIONS_NOT_APPLIED = 3,
+    /**
+     * USB configuration not supported.
+     */
+    CONFIGURATION_NOT_SUPPORTED = 4,
+}
diff --git a/usb/gadget/aidl/android/hardware/usb/gadget/UsbSpeed.aidl b/usb/gadget/aidl/android/hardware/usb/gadget/UsbSpeed.aidl
new file mode 100644
index 0000000..0492757
--- /dev/null
+++ b/usb/gadget/aidl/android/hardware/usb/gadget/UsbSpeed.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.usb.gadget;
+
+@VintfStability
+@Backing(type="int")
+enum UsbSpeed {
+    /**
+     * UNKNOWN - Not Connected or Unsupported Speed
+     */
+    UNKNOWN = 0,
+    /**
+     * USB Low Speed
+     */
+    LOWSPEED = 1,
+    /**
+     * USB Full Speed
+     */
+    FULLSPEED = 2,
+    /**
+     * USB High Speed
+     */
+    HIGHSPEED = 3,
+    /**
+     * USB Super Speed
+     */
+    SUPERSPEED = 4,
+    /**
+     * USB Super Speed 10Gbps
+     */
+    SUPERSPEED_10Gb = 5,
+    /**
+     * USB Super Speed 20Gbps
+     */
+    SUPERSPEED_20Gb = 6,
+}
diff --git a/usb/gadget/aidl/default/Android.bp b/usb/gadget/aidl/default/Android.bp
new file mode 100644
index 0000000..2ea0e12
--- /dev/null
+++ b/usb/gadget/aidl/default/Android.bp
@@ -0,0 +1,47 @@
+//
+// Copyright (C) 2022 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: [
+        "hardware_interfaces_license",
+    ],
+}
+cc_binary {
+    name: "android.hardware.usb.gadget-service.example",
+    relative_install_path: "hw",
+    init_rc: ["android.hardware.usb.gadget-service.example.rc"],
+    vintf_fragments: [
+        "android.hardware.usb.gadget-service.example.xml",
+    ],
+    vendor: true,
+    srcs: ["service_gadget.cpp", "UsbGadget.cpp"],
+    cflags: ["-Wall", "-Werror"],
+    shared_libs: [
+        "libbase",
+        "libbinder",
+        "libhidlbase",
+        "liblog",
+        "libutils",
+        "libhardware",
+	"android.hardware.usb.gadget-V1-ndk",
+	"android.frameworks.stats-V1-ndk",
+        "libcutils",
+	"libbinder_ndk",
+    ],
+}
diff --git a/usb/gadget/aidl/default/UsbGadget.cpp b/usb/gadget/aidl/default/UsbGadget.cpp
new file mode 100644
index 0000000..17e1da7
--- /dev/null
+++ b/usb/gadget/aidl/default/UsbGadget.cpp
@@ -0,0 +1,292 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "android.hardware.usb.gadget.aidl-service"
+
+#include "UsbGadget.h"
+#include <dirent.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <sys/inotify.h>
+#include <sys/mount.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include <aidl/android/frameworks/stats/IStats.h>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace usb {
+namespace gadget {
+
+string enabledPath;
+constexpr char kHsi2cPath[] = "/sys/devices/platform/10d50000.hsi2c";
+constexpr char kI2CPath[] = "/sys/devices/platform/10d50000.hsi2c/i2c-";
+constexpr char kAccessoryLimitCurrent[] = "i2c-max77759tcpc/usb_limit_accessory_current";
+constexpr char kAccessoryLimitCurrentEnable[] = "i2c-max77759tcpc/usb_limit_accessory_enable";
+
+UsbGadget::UsbGadget() : mGadgetIrqPath("") {}
+
+Status UsbGadget::getUsbGadgetIrqPath() {
+    std::string irqs;
+    size_t read_pos = 0;
+    size_t found_pos = 0;
+
+    if (!ReadFileToString(kProcInterruptsPath, &irqs)) {
+        ALOGE("cannot read all interrupts");
+        return Status::ERROR;
+    }
+
+    while (true) {
+        found_pos = irqs.find_first_of("\n", read_pos);
+        if (found_pos == std::string::npos) {
+            ALOGI("the string of all interrupts is unexpected");
+            return Status::ERROR;
+        }
+
+        std::string single_irq = irqs.substr(read_pos, found_pos - read_pos);
+
+        if (single_irq.find("dwc3", 0) != std::string::npos) {
+            unsigned int dwc3_irq_number;
+            size_t dwc3_pos = single_irq.find_first_of(":");
+            if (!ParseUint(single_irq.substr(0, dwc3_pos), &dwc3_irq_number)) {
+                ALOGI("unknown IRQ strings");
+                return Status::ERROR;
+            }
+
+            mGadgetIrqPath = kProcIrqPath + single_irq.substr(0, dwc3_pos) + kSmpAffinityList;
+            break;
+        }
+
+        if (found_pos == irqs.npos) {
+            ALOGI("USB gadget doesn't start");
+            return Status::ERROR;
+        }
+
+        read_pos = found_pos + 1;
+    }
+
+    return Status::SUCCESS;
+}
+
+void currentFunctionsAppliedCallback(bool functionsApplied, void* payload) {
+    UsbGadget* gadget = (UsbGadget*)payload;
+    gadget->mCurrentUsbFunctionsApplied = functionsApplied;
+}
+
+ScopedAStatus UsbGadget::getCurrentUsbFunctions(const shared_ptr<IUsbGadgetCallback>& callback,
+                                                int64_t in_transactionId) {
+    ScopedAStatus ret = callback->getCurrentUsbFunctionsCb(
+            mCurrentUsbFunctions,
+            mCurrentUsbFunctionsApplied ? Status::FUNCTIONS_APPLIED : Status::FUNCTIONS_NOT_APPLIED,
+            in_transactionId);
+    if (!ret.isOk())
+        ALOGE("Call to getCurrentUsbFunctionsCb failed %s", ret.getDescription().c_str());
+
+    return ScopedAStatus::ok();
+}
+
+ScopedAStatus UsbGadget::getUsbSpeed(const shared_ptr<IUsbGadgetCallback>& callback,
+                                     int64_t in_transactionId) {
+    std::string current_speed;
+    if (ReadFileToString(SPEED_PATH, &current_speed)) {
+        current_speed = Trim(current_speed);
+        ALOGI("current USB speed is %s", current_speed.c_str());
+        if (current_speed == "low-speed")
+            mUsbSpeed = UsbSpeed::LOWSPEED;
+        else if (current_speed == "full-speed")
+            mUsbSpeed = UsbSpeed::FULLSPEED;
+        else if (current_speed == "high-speed")
+            mUsbSpeed = UsbSpeed::HIGHSPEED;
+        else if (current_speed == "super-speed")
+            mUsbSpeed = UsbSpeed::SUPERSPEED;
+        else if (current_speed == "super-speed-plus")
+            mUsbSpeed = UsbSpeed::SUPERSPEED_10Gb;
+        else if (current_speed == "UNKNOWN")
+            mUsbSpeed = UsbSpeed::UNKNOWN;
+        else
+            mUsbSpeed = UsbSpeed::UNKNOWN;
+    } else {
+        ALOGE("Fail to read current speed");
+        mUsbSpeed = UsbSpeed::UNKNOWN;
+    }
+
+    if (callback) {
+        ScopedAStatus ret = callback->getUsbSpeedCb(mUsbSpeed, in_transactionId);
+
+        if (!ret.isOk()) ALOGE("Call to getUsbSpeedCb failed %s", ret.getDescription().c_str());
+    }
+
+    return ScopedAStatus::ok();
+}
+
+Status UsbGadget::tearDownGadget() {
+    return Status::SUCCESS;
+}
+
+ScopedAStatus UsbGadget::reset() {
+    return ScopedAStatus::ok();
+}
+
+Status UsbGadget::setupFunctions(long functions, const shared_ptr<IUsbGadgetCallback>& callback,
+                                 uint64_t timeout, int64_t in_transactionId) {
+    bool ffsEnabled = false;
+    ALOGI("functions: %ld, timeout: %ld", functions, timeout);
+
+    if ((functions & GadgetFunction::ADB) != 0) {
+        ffsEnabled = true;
+    }
+
+    if ((functions & GadgetFunction::NCM) != 0) {
+        ALOGI("setCurrentUsbFunctions ncm");
+    }
+
+    // Pull up the gadget right away when there are no ffs functions.
+    if (!ffsEnabled) {
+        mCurrentUsbFunctionsApplied = true;
+        if (callback)
+            callback->setCurrentUsbFunctionsCb(functions, Status::SUCCESS, in_transactionId);
+        return Status::SUCCESS;
+    }
+
+    return Status::SUCCESS;
+}
+
+Status getI2cBusHelper(string* name) {
+    DIR* dp;
+
+    dp = opendir(kHsi2cPath);
+    if (dp != NULL) {
+        struct dirent* ep;
+
+        while ((ep = readdir(dp))) {
+            if (ep->d_type == DT_DIR) {
+                if (string::npos != string(ep->d_name).find("i2c-")) {
+                    std::strtok(ep->d_name, "-");
+                    *name = std::strtok(NULL, "-");
+                }
+            }
+        }
+        closedir(dp);
+        return Status::SUCCESS;
+    }
+
+    ALOGE("Failed to open %s", kHsi2cPath);
+    return Status::ERROR;
+}
+
+ScopedAStatus UsbGadget::setCurrentUsbFunctions(long functions,
+                                                const shared_ptr<IUsbGadgetCallback>& callback,
+                                                int64_t timeout, int64_t in_transactionId) {
+    std::unique_lock<std::mutex> lk(mLockSetCurrentFunction);
+    std::string current_usb_power_operation_mode, current_usb_type;
+    std::string usb_limit_sink_enable;
+
+    string accessoryCurrentLimitEnablePath, accessoryCurrentLimitPath, path;
+
+    ALOGI("enter setCurrentUsbFunctions, in_transactionId=%ld , %ld", in_transactionId, timeout);
+    mCurrentUsbFunctions = functions;
+    mCurrentUsbFunctionsApplied = false;
+
+    getI2cBusHelper(&path);
+    accessoryCurrentLimitPath = kI2CPath + path + "/" + kAccessoryLimitCurrent;
+    accessoryCurrentLimitEnablePath = kI2CPath + path + "/" + kAccessoryLimitCurrentEnable;
+
+    // Get the gadget IRQ number before tearDownGadget()
+    if (mGadgetIrqPath.empty()) getUsbGadgetIrqPath();
+
+    // Unlink the gadget and stop the monitor if running.
+    Status status = tearDownGadget();
+    if (status != Status::SUCCESS) {
+        goto error;
+    }
+
+    ALOGI("Returned from tearDown gadget");
+
+    // Leave the gadget pulled down to give time for the host to sense disconnect.
+    // usleep(kDisconnectWaitUs);
+
+    if (functions == GadgetFunction::NONE) {
+        if (callback == NULL)
+            return ScopedAStatus::fromServiceSpecificErrorWithMessage(-1, "callback == NULL");
+        ScopedAStatus ret =
+                callback->setCurrentUsbFunctionsCb(functions, Status::SUCCESS, in_transactionId);
+        if (!ret.isOk())
+            ALOGE("Error while calling setCurrentUsbFunctionsCb %s", ret.getDescription().c_str());
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+                -1, "Error while calling setCurrentUsbFunctionsCb");
+    }
+
+    status = setupFunctions(functions, callback, timeout, in_transactionId);
+    if (status != Status::SUCCESS) {
+        goto error;
+    }
+
+    if (functions & GadgetFunction::NCM) {
+        if (!mGadgetIrqPath.empty()) {
+            if (!WriteStringToFile(BIG_CORE, mGadgetIrqPath))
+                ALOGI("Cannot move gadget IRQ to big core, path:%s", mGadgetIrqPath.c_str());
+        }
+    } else {
+        if (!mGadgetIrqPath.empty()) {
+            if (!WriteStringToFile(MEDIUM_CORE, mGadgetIrqPath))
+                ALOGI("Cannot move gadget IRQ to medium core, path:%s", mGadgetIrqPath.c_str());
+        }
+    }
+
+    if (ReadFileToString(CURRENT_USB_TYPE_PATH, &current_usb_type))
+        current_usb_type = Trim(current_usb_type);
+
+    if (ReadFileToString(CURRENT_USB_POWER_OPERATION_MODE_PATH, &current_usb_power_operation_mode))
+        current_usb_power_operation_mode = Trim(current_usb_power_operation_mode);
+
+    if (functions & GadgetFunction::ACCESSORY && current_usb_type == "Unknown SDP [CDP] DCP" &&
+        (current_usb_power_operation_mode == "default" ||
+         current_usb_power_operation_mode == "1.5A")) {
+        if (!WriteStringToFile("1300000", accessoryCurrentLimitPath)) {
+            ALOGI("Write 1.3A to limit current fail");
+        } else {
+            if (!WriteStringToFile("1", accessoryCurrentLimitEnablePath)) {
+                ALOGI("Enable limit current fail");
+            }
+        }
+    } else {
+        if (!WriteStringToFile("0", accessoryCurrentLimitEnablePath))
+            ALOGI("unvote accessory limit current failed");
+    }
+
+    ALOGI("Usb Gadget setcurrent functions called successfully");
+    return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+            -1, "Usb Gadget setcurrent functions called successfully");
+
+error:
+    ALOGI("Usb Gadget setcurrent functions failed");
+    if (callback == NULL)
+        return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+                -1, "Usb Gadget setcurrent functions failed");
+    ScopedAStatus ret = callback->setCurrentUsbFunctionsCb(functions, status, in_transactionId);
+    if (!ret.isOk())
+        ALOGE("Error while calling setCurrentUsbFunctionsCb %s", ret.getDescription().c_str());
+    return ScopedAStatus::fromServiceSpecificErrorWithMessage(
+            -1, "Error while calling setCurrentUsbFunctionsCb");
+}
+}  // namespace gadget
+}  // namespace usb
+}  // namespace hardware
+}  // namespace android
+}  // namespace aidl
diff --git a/usb/gadget/aidl/default/UsbGadget.h b/usb/gadget/aidl/default/UsbGadget.h
new file mode 100644
index 0000000..4060021
--- /dev/null
+++ b/usb/gadget/aidl/default/UsbGadget.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <aidl/android/hardware/usb/gadget/BnUsbGadget.h>
+#include <aidl/android/hardware/usb/gadget/BnUsbGadgetCallback.h>
+#include <aidl/android/hardware/usb/gadget/GadgetFunction.h>
+#include <aidl/android/hardware/usb/gadget/IUsbGadget.h>
+#include <aidl/android/hardware/usb/gadget/IUsbGadgetCallback.h>
+#include <android-base/file.h>
+#include <android-base/parseint.h>
+#include <android-base/properties.h>
+#include <android-base/strings.h>
+#include <android-base/unique_fd.h>
+#include <sched.h>
+#include <sys/epoll.h>
+#include <sys/eventfd.h>
+#include <utils/Log.h>
+#include <chrono>
+#include <condition_variable>
+#include <mutex>
+#include <string>
+#include <thread>
+
+namespace aidl {
+namespace android {
+namespace hardware {
+namespace usb {
+namespace gadget {
+
+using ::aidl::android::hardware::usb::gadget::GadgetFunction;
+using ::aidl::android::hardware::usb::gadget::IUsbGadget;
+using ::aidl::android::hardware::usb::gadget::IUsbGadgetCallback;
+using ::aidl::android::hardware::usb::gadget::Status;
+using ::aidl::android::hardware::usb::gadget::UsbSpeed;
+using ::android::base::GetProperty;
+using ::android::base::ParseUint;
+using ::android::base::ReadFileToString;
+using ::android::base::SetProperty;
+using ::android::base::Trim;
+using ::android::base::unique_fd;
+using ::android::base::WriteStringToFile;
+using ::ndk::ScopedAStatus;
+using ::std::shared_ptr;
+using ::std::string;
+
+constexpr char kGadgetName[] = "11110000.dwc3";
+constexpr char kProcInterruptsPath[] = "/proc/interrupts";
+constexpr char kProcIrqPath[] = "/proc/irq/";
+constexpr char kSmpAffinityList[] = "/smp_affinity_list";
+#ifndef UDC_PATH
+#define UDC_PATH "/sys/class/udc/11110000.dwc3/"
+#endif
+// static MonitorFfs monitorFfs(kGadgetName);
+
+#define SPEED_PATH UDC_PATH "current_speed"
+
+#define BIG_CORE "6"
+#define MEDIUM_CORE "4"
+
+#define POWER_SUPPLY_PATH "/sys/class/power_supply/usb/"
+#define USB_PORT0_PATH "/sys/class/typec/port0/"
+
+#define CURRENT_MAX_PATH POWER_SUPPLY_PATH "current_max"
+#define CURRENT_USB_TYPE_PATH POWER_SUPPLY_PATH "usb_type"
+#define CURRENT_USB_POWER_OPERATION_MODE_PATH USB_PORT0_PATH "power_operation_mode"
+
+struct UsbGadget : public BnUsbGadget {
+    UsbGadget();
+
+    // Makes sure that only one request is processed at a time.
+    std::mutex mLockSetCurrentFunction;
+    std::string mGadgetIrqPath;
+    long mCurrentUsbFunctions;
+    bool mCurrentUsbFunctionsApplied;
+    UsbSpeed mUsbSpeed;
+
+    ScopedAStatus setCurrentUsbFunctions(long functions,
+                                         const shared_ptr<IUsbGadgetCallback>& callback,
+                                         int64_t timeout, int64_t in_transactionId) override;
+
+    ScopedAStatus getCurrentUsbFunctions(const shared_ptr<IUsbGadgetCallback>& callback,
+                                         int64_t in_transactionId) override;
+
+    ScopedAStatus reset() override;
+
+    ScopedAStatus getUsbSpeed(const shared_ptr<IUsbGadgetCallback>& callback,
+                              int64_t in_transactionId) override;
+
+  private:
+    Status tearDownGadget();
+    Status getUsbGadgetIrqPath();
+    Status setupFunctions(long functions, const shared_ptr<IUsbGadgetCallback>& callback,
+                          uint64_t timeout, int64_t in_transactionId);
+};
+
+}  // namespace gadget
+}  // namespace usb
+}  // namespace hardware
+}  // namespace android
+}  // namespace aidl
diff --git a/usb/gadget/aidl/default/android.hardware.usb.gadget-service.example.rc b/usb/gadget/aidl/default/android.hardware.usb.gadget-service.example.rc
new file mode 100644
index 0000000..b2a8cc0
--- /dev/null
+++ b/usb/gadget/aidl/default/android.hardware.usb.gadget-service.example.rc
@@ -0,0 +1,4 @@
+service vendor.usb_gadget_default /vendor/bin/hw/android.hardware.usb.gadget-service.example
+    class hal
+    user system
+    group system
diff --git a/usb/gadget/aidl/default/android.hardware.usb.gadget-service.example.xml b/usb/gadget/aidl/default/android.hardware.usb.gadget-service.example.xml
new file mode 100644
index 0000000..e7eebc3
--- /dev/null
+++ b/usb/gadget/aidl/default/android.hardware.usb.gadget-service.example.xml
@@ -0,0 +1,10 @@
+<manifest version="1.0" type="device">
+    <hal format="aidl">
+        <name>android.hardware.usb.gadget</name>
+        <version>1</version>
+        <interface>
+            <name>IUsbGadget</name>
+            <instance>default</instance>
+        </interface>
+    </hal>
+</manifest>
diff --git a/usb/gadget/aidl/default/service_gadget.cpp b/usb/gadget/aidl/default/service_gadget.cpp
new file mode 100644
index 0000000..18d268d
--- /dev/null
+++ b/usb/gadget/aidl/default/service_gadget.cpp
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+#include "UsbGadget.h"
+/*using android::OK;
+using android::hardware::configureRpcThreadpool;
+using android::hardware::joinRpcThreadpool;
+using android::sp;
+using android::status_t;*/
+using ::aidl::android::hardware::usb::gadget::UsbGadget;
+int main() {
+    ABinderProcess_setThreadPoolMaxThreadCount(0);
+    std::shared_ptr<UsbGadget> usbgadget = ndk::SharedRefBase::make<UsbGadget>();
+    const std::string instance = std::string() + UsbGadget::descriptor + "/default";
+    binder_status_t status =
+            AServiceManager_addService(usbgadget->asBinder().get(), instance.c_str());
+    CHECK(status == STATUS_OK);
+    ABinderProcess_joinThreadPool();
+    return -1;
+}