diff --git a/security/secretkeeper/aidl/Android.bp b/security/secretkeeper/aidl/Android.bp
new file mode 100644
index 0000000..c77d299
--- /dev/null
+++ b/security/secretkeeper/aidl/Android.bp
@@ -0,0 +1,36 @@
+// Copyright (C) 2023 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package {
+    default_applicable_licenses: ["Android-Apache-2.0"],
+}
+
+aidl_interface {
+    name: "android.hardware.security.secretkeeper",
+    vendor_available: true,
+    srcs: ["android/hardware/security/secretkeeper/*.aidl"],
+    stability: "vintf",
+    backend: {
+        ndk: {
+            enabled: true,
+        },
+        rust: {
+            enabled: true,
+            apex_available: [
+                "//apex_available:platform",
+                "com.android.virt",
+            ],
+        },
+    },
+}
diff --git a/security/secretkeeper/aidl/aidl_api/android.hardware.security.secretkeeper/current/android/hardware/security/secretkeeper/ISecretkeeper.aidl b/security/secretkeeper/aidl/aidl_api/android.hardware.security.secretkeeper/current/android/hardware/security/secretkeeper/ISecretkeeper.aidl
new file mode 100644
index 0000000..2eb33c5
--- /dev/null
+++ b/security/secretkeeper/aidl/aidl_api/android.hardware.security.secretkeeper/current/android/hardware/security/secretkeeper/ISecretkeeper.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.security.secretkeeper;
+@VintfStability
+interface ISecretkeeper {
+  byte[] processSecretManagementRequest(in byte[] request);
+}
diff --git a/security/secretkeeper/aidl/android/hardware/security/secretkeeper/ISecretkeeper.aidl b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/ISecretkeeper.aidl
new file mode 100644
index 0000000..af715a9
--- /dev/null
+++ b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/ISecretkeeper.aidl
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2023 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.security.secretkeeper;
+
+@VintfStability
+/**
+ * Secretkeeper service definition.
+ *
+ * An ISecretkeeper instance provides secure storage of secrets on behalf of other components in
+ * Android, in particular for protected virtual machine instances. From the perspective of security
+ * privilege, Secretkeeper must be implemented in an environment with privilege higher than any of
+ * its clients. Since AVF based protected Virtual Machines are one set of its clients, the
+ * implementation of ISecretkeeper should live in a secure environment, such as:
+ * - A trusted execution environment such as ARM TrustZone.
+ * - A completely separate, purpose-built and certified secure CPU.
+ *
+ * TODO(b/291224769): Extend the HAL interface to include:
+ * 1. Session setup api: This is used to perform cryptographic operations that allow shared keys to
+ * be exchanged between session participants, typically (but not necessarily) a pVM instance and
+ * Secretkeeper. This session setup is based on public key cryptography.
+ * 2. Dice policy operation - These allow sealing of the secrets with a class of Dice chains.
+ * Typical operations are (securely) updating the dice policy sealing the Secrets above. These
+ * operations are core to AntiRollback protected secrets - ie, ensuring secrets of a pVM are only
+ * accessible to same or higher versions of the images.
+ * 3. Maintenance api: This is required for removing the Secretkeeper entries for obsolete pvMs.
+ */
+interface ISecretkeeper {
+    /**
+     * processSecretManagementRequest method is used for interacting with the Secret Management API
+     *
+     * Secret Management API: The clients can use this API to store (& get) 32 bytes of data.
+     * The API is a CBOR based protocol, which follows request/response model.
+     * See SecretManagement.cddl for the API spec.
+     *
+     * Further, the requests (from client) & responses (from service) must be encrypted into
+     * ProtectedRequestPacket & ProtectedResponsePacket using symmetric keys agreed between
+     * the client & service. This cryptographic protection is required because the messages are
+     * ferried via Android, which is allowed to be outside the TCB of clients (for example protected
+     * Virtual Machines). For this, service (& client) must implement a key exchange protocol, which
+     * is critical for establishing the secure channel.
+     *
+     * Secretkeeper database should guarantee the following properties:
+     * 1. Confidentiality: No entity (of security privilege lower than Secretkeeper) should
+     *    be able to get a client's data in clear.
+     *
+     * 2. Integrity: The data is protected against malicious Android OS tampering with database.
+     *    ie, if Android (userspace & kernel) tampers with the client's secret, the Secretkeeper
+     *    service must be able to detect it & return error when clients requests for their secrets.
+     *    Note: the integrity requirements also include Antirollback protection ie, reverting the
+     *    database into an old state should be detected.
+     *
+     * 3. The data is persistent across device boot.
+     *    Note: Denial of service is not in scope. A malicious Android may be able to delete data,
+     *    but for ideal Android, the data should be persistent.
+     *
+     * @param CBOR-encoded ProtectedRequestPacket. See SecretManagement.cddl for its definition.
+     * @return CBOR-encoded ProtectedResponsePacket. See SecretManagement.cddl for its definition
+     */
+    byte[] processSecretManagementRequest(in byte[] request);
+}
diff --git a/security/secretkeeper/aidl/android/hardware/security/secretkeeper/SecretManagement.cddl b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/SecretManagement.cddl
new file mode 100644
index 0000000..5631937
--- /dev/null
+++ b/security/secretkeeper/aidl/android/hardware/security/secretkeeper/SecretManagement.cddl
@@ -0,0 +1,116 @@
+; CDDL for the Secret Management API.
+; Also see processSecretManagementRequest method in ISecretkeeper.aidl
+
+; ProtectedRequestPacket is used by client for accessing Secret Management API
+; in Secretkeeper service. The service returns ProtectedResponsePacket of the corresponding type.
+
+; ProtectedRequestPacket & ProtectedResponsePacket are encrypted wrappers
+; on RequestPacket & ResponsePacket using symmetric keys agreed between Secretkeeper & clients
+; (these are referred to as KeySourceToSink & KeySinkToSource)
+;
+; The API operation required is encoded using 'Opcode', the arguments using 'Params'
+; and returned values as 'Result'.
+
+ProtectedRequestPacket =
+        ProtectedGetVersionRequest / ProtectedStoreSecretRequest / ProtectedGetSecretRequest
+ProtectedResponsePacket =
+        ProtectedGetVersionResponse / ProtectedStoreSecretResponse / ProtectedGetSecretResponse
+
+ProtectedGetVersionRequest = ProtectedRequestPacket<GetVersionRequestPacket>
+ProtectedGetVersionResponse = ProtectedResponsePacket<GetVersionResponsePacket>
+ProtectedStoreSecretRequest = ProtectedRequestPacket<StoreSecretRequestPacket>
+ProtectedStoreSecretResponse = ProtectedResponsePacket<StoreSecretResponsePacket>
+ProtectedGetSecretRequest = ProtectedRequestPacket<GetSecretRequestPacket>
+ProtectedGetSecretResponse = ProtectedResponsePacket<GetSecretResponsePacket>
+
+GetVersionRequestPacket = RequestPacket<GetVersionOpcode, GetVersionParams>
+GetVersionResponsePacket = ResponsePacket<GetVersionResult>
+StoreSecretRequestPacket = RequestPacket<StoreSecretOpcode, StoreSecretParams>
+StoreSecretResponsePacket = ResponsePacket<StoreSecretResult>
+GetSecretRequestPacket = RequestPacket<GetOpcode, GetSecretParams>
+GetSecretResponsePacket = ResponsePacket<GetSecretResult>
+
+RequestPacket<Opcode, Params> = [
+    Opcode,
+    Params
+]
+ResponsePacket<Result> = ResponsePacketError / ResponsePacketSuccess<Result>
+
+ResponsePacketSuccess = [
+    0,                          ; Indicates successful Response
+    result : Result
+]
+ResponsePacketError = [
+    error_code: ErrorCode,      ; Indicate the error
+    error_message: tstr         ; Additional human-readable context
+]
+
+Opcode = &(
+    GetVersionOpcode: 1,     ; Get version of the SecretManagement API
+    StoreSecretOpcode: 2,          ; Store a secret
+    GetSecretOpcode: 3,            ; Get the secret
+)
+
+GetVersionParams = ()
+GetVersionResult = (version : uint)
+
+StoreSecretParams = (
+    id : bstr .size 64              ; Unique identifier of the secret
+    secret : bstr .size 32,
+    sealing_policy : bstr .cbor DicePolicy,    ; See DicePolicy.cddl for definition of DicePolicy
+)
+StoreSecretResult = ()
+
+GetSecretParams = (
+    id : bstr .size 64              ; Unique identifier of the secret
+    ; Use this to update the sealing policy associated with a secret during GetSecret operation.
+    updated_sealing_policy : bstr .cbor DicePolicy / nil,
+)
+GetSecretResult = (secret : bstr .size 32)
+
+
+ProtectedRequestPacket<Payload, Key> = CryptoPayload<Payload, KeySourceToSink>
+ProtectedResponsePacket<Payload, Key> = ProtectedResponseError
+                                    / ProtectedResponseSuccess<Payload>
+
+ProtectedResponseSuccess<Payload> = [
+    0,                                ; Indicates successful crypto operations. Note: Payload
+                                                    ; may contain Error from functional layer.
+    message: CryptoPayload<Payload, KeySinkToSource>         ; message is the encrypted payload
+]
+
+ProtectedResponseError = [
+    error_code: CryptoErrorCode,           ; Indicates the error. This is in cleartext & will be
+                                           ; visible to Android. These are errors from crypto
+                                           ; layer & indicates the request could not even be read
+    message: tstr                          ; Additional human-readable context
+]
+
+CryptoPayload<Payload, Key> = [         ; COSE_Encrypt0 (untagged), [RFC 9052 s5.2]
+    protected: bstr .cbor {
+        1 : 3,                  ; Algorithm: AES-GCM mode w/ 256-bit key, 128-bit tag
+        4 : bstr                ; key identifier, uniquely identifies the session
+                                ; TODO(b/291228560): Refer to the Key Exchange spec.
+    },
+    unprotected: {
+        5 : bstr .size 12          ; IV
+    },
+    ciphertext : bstr     ; AES-GCM-256(Key, bstr .cbor Payload)
+                          ; AAD for the encryption is CBOR-serialized
+                          ; Enc_structure (RFC 9052 s5.3) with empty external_aad.
+]
+
+; TODO(b/291224769): Create a more exhaustive set of CryptoErrorCode
+CryptoErrorCode = &(
+    CryptoErrorCode_SessionExpired: 1,
+)
+
+; TODO(b/291224769): Create a more exhaustive set of ErrorCodes
+ErrorCode = &(
+    ; Use this as if no other error code can be used.
+    ErrorCode_UnexpectedServerError: 1,
+    ; Indicate the Request was malformed & hence couldnt be served.
+    ErrorCode_RequestMalformed: 2,
+)
+
+; INCLUDE DicePolicy.cddl for: DicePolicy
\ No newline at end of file