diff --git a/automotive/can/1.0/default/CanBusSlcan.cpp b/automotive/can/1.0/default/CanBusSlcan.cpp
index 5005ecd..f08566c 100644
--- a/automotive/can/1.0/default/CanBusSlcan.cpp
+++ b/automotive/can/1.0/default/CanBusSlcan.cpp
@@ -56,7 +56,7 @@
      * that has already been configured and brought up.
      */
     if (ioctl(uartFd.get(), SIOCGIFNAME, ifrequest.ifr_name) < 0) {
-        LOG(ERROR) << "Failed to get the name of the created device: " << strerror(errno);
+        PLOG(ERROR) << "Failed to get the name of the created device";
         return ICanController::Result::UNKNOWN_ERROR;
     }
 
@@ -80,7 +80,7 @@
      * controlling terminal */
     mFd = base::unique_fd(open(mUartName.c_str(), O_RDWR | O_NONBLOCK | O_NOCTTY));
     if (!mFd.ok()) {
-        LOG(ERROR) << "SLCAN Failed to open " << mUartName << ": " << strerror(errno);
+        PLOG(ERROR) << "SLCAN Failed to open " << mUartName;
         return ICanController::Result::BAD_INTERFACE_ID;
     }
 
@@ -92,7 +92,7 @@
     // blank terminal settings and pull them from the device
     struct termios terminalSettings = {};
     if (tcgetattr(mFd.get(), &terminalSettings) < 0) {
-        LOG(ERROR) << "Failed to read attrs of" << mUartName << ": " << strerror(errno);
+        PLOG(ERROR) << "Failed to read attrs of" << mUartName;
         return ICanController::Result::UNKNOWN_ERROR;
     }
 
@@ -107,42 +107,40 @@
     struct serial_struct serialSettings;
     // get serial settings
     if (ioctl(mFd.get(), TIOCGSERIAL, &serialSettings) < 0) {
-        LOG(ERROR) << "Failed to read serial settings from " << mUartName << ": "
-                   << strerror(errno);
+        PLOG(ERROR) << "Failed to read serial settings from " << mUartName;
         return ICanController::Result::UNKNOWN_ERROR;
     }
     // set low latency mode
     serialSettings.flags |= ASYNC_LOW_LATENCY;
     // apply serial settings
     if (ioctl(mFd.get(), TIOCSSERIAL, &serialSettings) < 0) {
-        LOG(ERROR) << "Failed to set low latency mode on " << mUartName << ": " << strerror(errno);
+        PLOG(ERROR) << "Failed to set low latency mode on " << mUartName;
         return ICanController::Result::UNKNOWN_ERROR;
     }
 
     /* TCSADRAIN applies settings after we finish writing the rest of our
      * changes (as opposed to TCSANOW, which changes immediately) */
     if (tcsetattr(mFd.get(), TCSADRAIN, &terminalSettings) < 0) {
-        LOG(ERROR) << "Failed to apply terminal settings to " << mUartName << ": "
-                   << strerror(errno);
+        PLOG(ERROR) << "Failed to apply terminal settings to " << mUartName;
         return ICanController::Result::UNKNOWN_ERROR;
     }
 
     // apply speed setting for CAN
     if (write(mFd.get(), canBitrateCommand->c_str(), canBitrateCommand->length()) <= 0) {
-        LOG(ERROR) << "Failed to apply CAN bitrate: " << strerror(errno);
+        PLOG(ERROR) << "Failed to apply CAN bitrate";
         return ICanController::Result::UNKNOWN_ERROR;
     }
 
     // TODO(b/144775286): set open flag & support listen only
     if (write(mFd.get(), slcanprotocol::kOpenCommand.c_str(),
               slcanprotocol::kOpenCommand.length()) <= 0) {
-        LOG(ERROR) << "Failed to set open flag: " << strerror(errno);
+        PLOG(ERROR) << "Failed to set open flag";
         return ICanController::Result::UNKNOWN_ERROR;
     }
 
     // set line discipline to slcan
     if (ioctl(mFd.get(), TIOCSETD, &slcanprotocol::kSlcanDiscipline) < 0) {
-        LOG(ERROR) << "Failed to set line discipline to slcan: " << strerror(errno);
+        PLOG(ERROR) << "Failed to set line discipline to slcan";
         return ICanController::Result::UNKNOWN_ERROR;
     }
 
diff --git a/automotive/can/1.0/default/CanSocket.cpp b/automotive/can/1.0/default/CanSocket.cpp
index 86ccc0e..f379d5a 100644
--- a/automotive/can/1.0/default/CanSocket.cpp
+++ b/automotive/can/1.0/default/CanSocket.cpp
@@ -67,7 +67,7 @@
 bool CanSocket::send(const struct canfd_frame& frame) {
     const auto res = write(mSocket.get(), &frame, CAN_MTU);
     if (res < 0) {
-        LOG(DEBUG) << "CanSocket send failed: " << errno;
+        PLOG(DEBUG) << "CanSocket send failed";
         return false;
     }
     if (res != CAN_MTU) {
@@ -102,7 +102,7 @@
         const auto sel = selectRead(mSocket, kReadPooling);
         if (sel == 0) continue;  // timeout
         if (sel == -1) {
-            LOG(ERROR) << "Select failed: " << errno;
+            PLOG(ERROR) << "Select failed";
             break;
         }
 
@@ -130,7 +130,7 @@
             if (errno == EAGAIN) continue;
 
             errnoCopy = errno;
-            LOG(ERROR) << "Failed to read CAN packet: " << strerror(errno) << " (" << errno << ")";
+            PLOG(ERROR) << "Failed to read CAN packet";
             break;
         }
 
diff --git a/automotive/can/1.0/default/libnetdevice/NetlinkSocket.cpp b/automotive/can/1.0/default/libnetdevice/NetlinkSocket.cpp
index 6a7f506..7817169 100644
--- a/automotive/can/1.0/default/libnetdevice/NetlinkSocket.cpp
+++ b/automotive/can/1.0/default/libnetdevice/NetlinkSocket.cpp
@@ -23,7 +23,7 @@
 NetlinkSocket::NetlinkSocket(int protocol) {
     mFd.reset(socket(AF_NETLINK, SOCK_RAW, protocol));
     if (!mFd.ok()) {
-        LOG(ERROR) << "Can't open Netlink socket: " << errno;
+        PLOG(ERROR) << "Can't open Netlink socket";
         mFailed = true;
         return;
     }
@@ -32,7 +32,7 @@
     sa.nl_family = AF_NETLINK;
 
     if (bind(mFd.get(), reinterpret_cast<struct sockaddr*>(&sa), sizeof(sa)) < 0) {
-        LOG(ERROR) << "Can't bind Netlink socket: " << errno;
+        PLOG(ERROR) << "Can't bind Netlink socket";
         mFd.reset();
         mFailed = true;
     }
@@ -57,7 +57,7 @@
     msg.msg_iovlen = 1;
 
     if (sendmsg(mFd.get(), &msg, 0) < 0) {
-        LOG(ERROR) << "Can't send Netlink message: " << errno;
+        PLOG(ERROR) << "Can't send Netlink message";
         return false;
     }
     return true;
@@ -79,7 +79,7 @@
 
     const ssize_t status = recvmsg(mFd.get(), &msg, 0);
     if (status < 0) {
-        LOG(ERROR) << "Failed to receive Netlink message: " << errno;
+        PLOG(ERROR) << "Failed to receive Netlink message";
         return false;
     }
     size_t remainingLen = status;
diff --git a/automotive/can/1.0/default/libnetdevice/can.cpp b/automotive/can/1.0/default/libnetdevice/can.cpp
index 06d45d3..a2a85dc 100644
--- a/automotive/can/1.0/default/libnetdevice/can.cpp
+++ b/automotive/can/1.0/default/libnetdevice/can.cpp
@@ -48,7 +48,7 @@
     }
 
     if (setsockopt(sock.get(), SOL_CAN_RAW, CAN_RAW_ERR_FILTER, &kErrMask, sizeof(kErrMask)) < 0) {
-        LOG(ERROR) << "Can't receive error frames, CAN setsockpt failed: " << strerror(errno);
+        PLOG(ERROR) << "Can't receive error frames, CAN setsockpt failed";
         return {};
     }
 
diff --git a/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp b/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp
index aee8205..b051442 100644
--- a/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp
+++ b/automotive/can/1.0/default/libnetdevice/libnetdevice.cpp
@@ -41,7 +41,7 @@
     }
 
     if (ioctl(sock.get(), request, &ifr) < 0) {
-        LOG(ERROR) << "ioctl(" << std::hex << request << std::dec << ") failed: " << errno;
+        PLOG(ERROR) << "ioctl(" << std::hex << request << std::dec << ") failed";
         return false;
     }
 
diff --git a/automotive/can/1.0/tools/canhalctrl.cpp b/automotive/can/1.0/tools/canhalctrl.cpp
index c186b74..bf1c3b1 100644
--- a/automotive/can/1.0/tools/canhalctrl.cpp
+++ b/automotive/can/1.0/tools/canhalctrl.cpp
@@ -15,6 +15,7 @@
  */
 
 #include <android-base/logging.h>
+#include <android-base/parseint.h>
 #include <android/hardware/automotive/can/1.0/ICanController.h>
 #include <android/hidl/manager/1.2/IServiceManager.h>
 #include <hidl-utils/hidl-utils.h>
@@ -72,8 +73,8 @@
             slcan.ttyname(interface);
             config.interfaceId.slcan(slcan);
         } else if (type == ICanController::InterfaceType::INDEXED) {
-            auto idx = std::stol(interface);
-            if (idx < 0 || idx > UINT8_MAX) {
+            unsigned idx;
+            if (!android::base::ParseUint(interface, &idx, unsigned(UINT8_MAX))) {
                 std::cerr << "Interface index out of range: " << idx;
                 return -1;
             }
@@ -146,9 +147,11 @@
             return -1;
         }
 
-        long long bitrate = 0;
-        if (argc == 4) {
-            bitrate = std::stoll(argv[3]);
+        uint32_t bitrate = 0;
+        if (argc == 4 && !android::base::ParseUint(argv[3], &bitrate)) {
+            std::cerr << "Invalid bitrate!" << std::endl;
+            usage();
+            return -1;
         }
 
         return up(busName, *type, interface, bitrate);
diff --git a/automotive/can/1.0/tools/canhalsend.cpp b/automotive/can/1.0/tools/canhalsend.cpp
index 18e815d..f0f9d10 100644
--- a/automotive/can/1.0/tools/canhalsend.cpp
+++ b/automotive/can/1.0/tools/canhalsend.cpp
@@ -77,9 +77,9 @@
     const std::string msgidStr = msg.substr(0, hashpos);
     const std::string payloadStr = msg.substr(hashpos + 1);
 
-    size_t idx = 0;
-    V1_0::CanMessageId msgid = std::stoi(msgidStr, &idx, 16);
-    if (msgidStr[idx] != '\0') return std::nullopt;
+    V1_0::CanMessageId msgid;
+    // "0x" must be prepended to msgidStr, since ParseUint doesn't accept a base argument.
+    if (!android::base::ParseUint("0x" + msgidStr, &msgid)) return std::nullopt;
 
     V1_0::CanMessage canmsg = {};
     canmsg.id = msgid;
@@ -111,8 +111,9 @@
     if (payloadStr.size() % 2 != 0) return std::nullopt;
     for (size_t i = 0; i < payloadStr.size(); i += 2) {
         std::string byteStr(payloadStr, i, 2);
-        payload.emplace_back(std::stoi(byteStr, &idx, 16));
-        if (byteStr[idx] != '\0') return std::nullopt;
+        uint8_t byteBuf;
+        if (!android::base::ParseUint("0x" + byteStr, &byteBuf)) return std::nullopt;
+        payload.emplace_back(byteBuf);
     }
     canmsg.payload = payload;