diff --git a/audio/7.1/Android.bp b/audio/7.1/Android.bp
index 52980e2..cede72a 100644
--- a/audio/7.1/Android.bp
+++ b/audio/7.1/Android.bp
@@ -17,7 +17,6 @@
         "IDevice.hal",
         "IDevicesFactory.hal",
         "IPrimaryDevice.hal",
-        "IStreamIn.hal",
         "IStreamOut.hal",
         "IStreamOutLatencyModeCallback.hal",
     ],
diff --git a/audio/7.1/IDevice.hal b/audio/7.1/IDevice.hal
index e0b1e92..c158e7e 100644
--- a/audio/7.1/IDevice.hal
+++ b/audio/7.1/IDevice.hal
@@ -20,7 +20,6 @@
 import @7.0::AudioInOutFlag;
 import @7.0::IDevice;
 import @7.0::Result;
-import IStreamIn;
 import IStreamOut;
 
 interface IDevice extends @7.0::IDevice {
@@ -56,37 +55,6 @@
                     AudioConfig suggestedConfig);
 
     /**
-     * This method creates and opens the audio hardware input stream.
-     * If the stream can not be opened with the proposed audio config,
-     * HAL must provide suggested values for the audio config.
-     *
-     * Note: INVALID_ARGUMENTS is returned both in the case when the
-     * HAL can not use the provided config and in the case when
-     * the value of any argument is invalid. In the latter case the
-     * HAL must provide a default initialized suggested config.
-     *
-     * @param ioHandle handle assigned by AudioFlinger.
-     * @param device device type and (if needed) address.
-     * @param config stream configuration.
-     * @param flags additional flags.
-     * @param sinkMetadata Description of the audio that is suggested by the client.
-     *                     May be used by implementations to configure processing effects.
-     * @return retval operation completion status.
-     * @return inStream in case of success, created input stream.
-     * @return suggestedConfig in the case of rejection of the proposed config,
-     *                         a config suggested by the HAL.
-     */
-    openInputStream_7_1(
-            AudioIoHandle ioHandle,
-            DeviceAddress device,
-            AudioConfig config,
-            vec<AudioInOutFlag> flags,
-            SinkMetadata sinkMetadata) generates (
-                    Result retval,
-                    IStreamIn inStream,
-                    AudioConfig suggestedConfig);
-
-    /**
      * Notifies the device module about the connection state of an input/output
      * device attached to it. The devicePort identifies the device and may also
      * provide extra information such as raw audio descriptors.
diff --git a/audio/7.1/config/api/current.txt b/audio/7.1/config/api/current.txt
index 2963904..3a08b71 100644
--- a/audio/7.1/config/api/current.txt
+++ b/audio/7.1/config/api/current.txt
@@ -86,6 +86,7 @@
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioContentType AUDIO_CONTENT_TYPE_MUSIC;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioContentType AUDIO_CONTENT_TYPE_SONIFICATION;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioContentType AUDIO_CONTENT_TYPE_SPEECH;
+    enum_constant public static final android.audio.policy.configuration.V7_1.AudioContentType AUDIO_CONTENT_TYPE_ULTRASOUND;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioContentType AUDIO_CONTENT_TYPE_UNKNOWN;
   }
 
@@ -273,6 +274,7 @@
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_INPUT_FLAG_MMAP_NOIRQ;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_INPUT_FLAG_RAW;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_INPUT_FLAG_SYNC;
+    enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_INPUT_FLAG_ULTRASOUND;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_INPUT_FLAG_VOIP_TX;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_OUTPUT_FLAG_DEEP_BUFFER;
@@ -290,6 +292,7 @@
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_OUTPUT_FLAG_SPATIALIZER;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_OUTPUT_FLAG_SYNC;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_OUTPUT_FLAG_TTS;
+    enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_OUTPUT_FLAG_ULTRASOUND;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioInOutFlag AUDIO_OUTPUT_FLAG_VOIP_RX;
   }
 
@@ -314,6 +317,7 @@
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioSource AUDIO_SOURCE_HOTWORD;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioSource AUDIO_SOURCE_MIC;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioSource AUDIO_SOURCE_REMOTE_SUBMIX;
+    enum_constant public static final android.audio.policy.configuration.V7_1.AudioSource AUDIO_SOURCE_ULTRASOUND;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioSource AUDIO_SOURCE_UNPROCESSED;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioSource AUDIO_SOURCE_VOICE_CALL;
     enum_constant public static final android.audio.policy.configuration.V7_1.AudioSource AUDIO_SOURCE_VOICE_COMMUNICATION;
diff --git a/audio/7.1/config/audio_policy_configuration.xsd b/audio/7.1/config/audio_policy_configuration.xsd
index 414552e..ebc23ed 100644
--- a/audio/7.1/config/audio_policy_configuration.xsd
+++ b/audio/7.1/config/audio_policy_configuration.xsd
@@ -180,6 +180,7 @@
             <xs:enumeration value="AUDIO_OUTPUT_FLAG_INCALL_MUSIC" />
             <xs:enumeration value="AUDIO_OUTPUT_FLAG_GAPLESS_OFFLOAD" />
             <xs:enumeration value="AUDIO_OUTPUT_FLAG_SPATIALIZER" />
+            <xs:enumeration value="AUDIO_OUTPUT_FLAG_ULTRASOUND" />
             <xs:enumeration value="AUDIO_INPUT_FLAG_FAST" />
             <xs:enumeration value="AUDIO_INPUT_FLAG_HW_HOTWORD" />
             <xs:enumeration value="AUDIO_INPUT_FLAG_RAW" />
@@ -188,6 +189,7 @@
             <xs:enumeration value="AUDIO_INPUT_FLAG_VOIP_TX" />
             <xs:enumeration value="AUDIO_INPUT_FLAG_HW_AV_SYNC" />
             <xs:enumeration value="AUDIO_INPUT_FLAG_DIRECT" />
+            <xs:enumeration value="AUDIO_INPUT_FLAG_ULTRASOUND" />
         </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="audioInOutFlags">
@@ -471,6 +473,7 @@
             <xs:enumeration value="AUDIO_CONTENT_TYPE_MUSIC"/>
             <xs:enumeration value="AUDIO_CONTENT_TYPE_MOVIE"/>
             <xs:enumeration value="AUDIO_CONTENT_TYPE_SONIFICATION"/>
+            <xs:enumeration value="AUDIO_CONTENT_TYPE_ULTRASOUND"/>
         </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="samplingRates">
@@ -742,6 +745,7 @@
             <xs:enumeration value="AUDIO_SOURCE_ECHO_REFERENCE"/>
             <xs:enumeration value="AUDIO_SOURCE_FM_TUNER"/>
             <xs:enumeration value="AUDIO_SOURCE_HOTWORD"/>
+            <xs:enumeration value="AUDIO_SOURCE_ULTRASOUND"/>
         </xs:restriction>
     </xs:simpleType>
     <!-- Enum values of device_category from Volume.h. -->
diff --git a/audio/aidl/Android.bp b/audio/aidl/Android.bp
index c172674..6a0cfa5 100644
--- a/audio/aidl/Android.bp
+++ b/audio/aidl/Android.bp
@@ -47,6 +47,11 @@
             vndk: {
                 enabled: true,
             },
+            apex_available: [
+                "//apex_available:platform",
+                "com.android.bluetooth",
+            ],
+            min_sdk_version: "31",
         },
     },
     versions: [
diff --git a/audio/core/all-versions/default/Device.cpp b/audio/core/all-versions/default/Device.cpp
index ca8c03d..b954fcd 100644
--- a/audio/core/all-versions/default/Device.cpp
+++ b/audio/core/all-versions/default/Device.cpp
@@ -348,16 +348,6 @@
     _hidl_cb(result, streamOut, suggestedConfig);
     return Void();
 }
-
-Return<void> Device::openInputStream_7_1(int32_t ioHandle, const DeviceAddress& device,
-                                         const AudioConfig& config, const AudioInputFlags& flags,
-                                         const SinkMetadata& sinkMetadata,
-                                         openInputStream_7_1_cb _hidl_cb) {
-    auto [result, streamIn, suggestedConfig] =
-            openInputStreamImpl(ioHandle, device, config, flags, sinkMetadata);
-    _hidl_cb(result, streamIn, suggestedConfig);
-    return Void();
-}
 #endif  // V7.1
 
 Return<bool> Device::supportsAudioPatches() {
diff --git a/audio/core/all-versions/default/include/core/default/Device.h b/audio/core/all-versions/default/include/core/default/Device.h
index 8cde3e0..0696f97 100644
--- a/audio/core/all-versions/default/include/core/default/Device.h
+++ b/audio/core/all-versions/default/include/core/default/Device.h
@@ -123,10 +123,6 @@
                                       const AudioConfig& config, const AudioOutputFlags& flags,
                                       const SourceMetadata& sourceMetadata,
                                       openOutputStream_7_1_cb _hidl_cb) override;
-    Return<void> openInputStream_7_1(int32_t ioHandle, const DeviceAddress& device,
-                                     const AudioConfig& config, const AudioInputFlags& flags,
-                                     const SinkMetadata& sinkMetadata,
-                                     openInputStream_7_1_cb _hidl_cb) override;
 #endif
 
     Return<bool> supportsAudioPatches() override;
diff --git a/audio/core/all-versions/default/include/core/default/StreamIn.h b/audio/core/all-versions/default/include/core/default/StreamIn.h
index a6346e5..4627eec 100644
--- a/audio/core/all-versions/default/include/core/default/StreamIn.h
+++ b/audio/core/all-versions/default/include/core/default/StreamIn.h
@@ -17,7 +17,9 @@
 #ifndef ANDROID_HARDWARE_AUDIO_STREAMIN_H
 #define ANDROID_HARDWARE_AUDIO_STREAMIN_H
 
-#include PATH(android/hardware/audio/FILE_VERSION/IStreamIn.h)
+// clang-format off
+#include PATH(android/hardware/audio/CORE_TYPES_FILE_VERSION/IStreamIn.h)
+// clang-format on
 
 #include "Device.h"
 #include "Stream.h"
diff --git a/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h b/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h
index a567cf9..83ca9eb 100644
--- a/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h
+++ b/audio/core/all-versions/vts/functional/4.0/AudioPrimaryHidlHalUtils.h
@@ -15,9 +15,9 @@
  */
 
 // clang-format off
-#include PATH(android/hardware/audio/FILE_VERSION/IStreamIn.h)
-#include PATH(android/hardware/audio/FILE_VERSION/IStreamOut.h)
+#include PATH(android/hardware/audio/CORE_TYPES_FILE_VERSION/IStreamIn.h)
 #include PATH(android/hardware/audio/CORE_TYPES_FILE_VERSION/types.h)
+#include PATH(android/hardware/audio/FILE_VERSION/IStreamOut.h)
 #include PATH(android/hardware/audio/common/COMMON_TYPES_FILE_VERSION/types.h)
 // clang-format on
 #include <hidl/HidlSupport.h>
diff --git a/audio/core/all-versions/vts/functional/7.1/AudioPrimaryHidlHalTest.cpp b/audio/core/all-versions/vts/functional/7.1/AudioPrimaryHidlHalTest.cpp
index d82d4ad..6b9b32d 100644
--- a/audio/core/all-versions/vts/functional/7.1/AudioPrimaryHidlHalTest.cpp
+++ b/audio/core/all-versions/vts/functional/7.1/AudioPrimaryHidlHalTest.cpp
@@ -47,3 +47,51 @@
     // initial state. To workaround this, destroy the HAL at the end of this test.
     ASSERT_TRUE(resetDevice());
 }
+class LatencyModeOutputStreamTest : public OutputStreamTest {
+  protected:
+    void SetUp() override {
+        OutputStreamTest::SetUp();
+
+        Result res;
+        EXPECT_OK(stream->getRecommendedLatencyModes(returnIn(res, mSupportedLatencyModes)));
+        EXPECT_RESULT(okOrNotSupported, res);
+        if (res == Result::NOT_SUPPORTED) {
+            GTEST_SKIP() << "latency mode is not supported";  // returns
+        }
+    }
+    hidl_vec<LatencyMode> mSupportedLatencyModes;
+};
+
+TEST_P(LatencyModeOutputStreamTest, GetRecommendedLatencyModes) {
+    doc::test("Verify that reported latency modes are valid when supported");
+    for (auto mode : mSupportedLatencyModes) {
+        ASSERT_TRUE(mode >= LatencyMode::FREE && mode <= LatencyMode::LOW);
+    }
+}
+
+TEST_P(LatencyModeOutputStreamTest, SetValidLatencyMode) {
+    doc::test("Verify that setting valid latency modes works when supported");
+    for (auto mode : mSupportedLatencyModes) {
+        EXPECT_OK(stream->setLatencyMode(mode));
+    }
+}
+
+TEST_P(LatencyModeOutputStreamTest, SetInValidLatencyMode) {
+    doc::test("Verify that setting invalid latency modes fails");
+    EXPECT_RESULT(invalidArgsOrNotSupported,
+            stream->setLatencyMode(static_cast<LatencyMode>(1977)));
+}
+
+/** Stub implementation of IStreamOutEventCallback **/
+class MockOutLatencyModeCallback : public IStreamOutLatencyModeCallback {
+    Return<void> onRecommendedLatencyModeChanged(
+            const hidl_vec<LatencyMode>& hidlModes __unused) override {
+        return {};
+    }
+};
+
+TEST_P(LatencyModeOutputStreamTest, SetLatencyModeCallback) {
+    doc::test("Verify that setting a latency mode callback works when supported");
+    EXPECT_OK(stream->setLatencyModeCallback(new MockOutLatencyModeCallback));
+    EXPECT_OK(stream->setLatencyModeCallback(nullptr));
+}
diff --git a/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h b/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
index 404532a..09446cd 100644
--- a/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
+++ b/audio/core/all-versions/vts/functional/AudioPrimaryHidlHalTest.h
@@ -91,8 +91,9 @@
 using namespace ::android::hardware::audio::common::COMMON_TYPES_CPP_VERSION;
 using namespace ::android::hardware::audio::common::test::utility;
 using namespace ::android::hardware::audio::CPP_VERSION;
-using ReadParameters = ::android::hardware::audio::CPP_VERSION::IStreamIn::ReadParameters;
-using ReadStatus = ::android::hardware::audio::CPP_VERSION::IStreamIn::ReadStatus;
+using ReadParameters =
+        ::android::hardware::audio::CORE_TYPES_CPP_VERSION::IStreamIn::ReadParameters;
+using ReadStatus = ::android::hardware::audio::CORE_TYPES_CPP_VERSION::IStreamIn::ReadStatus;
 using WriteCommand = ::android::hardware::audio::CPP_VERSION::IStreamOut::WriteCommand;
 using WriteStatus = ::android::hardware::audio::CPP_VERSION::IStreamOut::WriteStatus;
 #if MAJOR_VERSION >= 7
@@ -1010,6 +1011,7 @@
 
 class OutputStreamTest
     : public OpenStreamTest<::android::hardware::audio::CPP_VERSION::IStreamOut> {
+  protected:
     void SetUp() override {
         ASSERT_NO_FATAL_FAILURE(OpenStreamTest::SetUp());  // setup base
 #if MAJOR_VERSION <= 6
@@ -1035,7 +1037,6 @@
     }
 #if MAJOR_VERSION >= 4 && MAJOR_VERSION <= 6
 
-  protected:
     const SourceMetadata initMetadata = {
         { { AudioUsage::MEDIA,
             AudioContentType::MUSIC,
@@ -1089,7 +1090,7 @@
 
 class StreamReader : public StreamWorker<StreamReader> {
   public:
-    using IStreamIn = ::android::hardware::audio::CPP_VERSION::IStreamIn;
+    using IStreamIn = ::android::hardware::audio::CORE_TYPES_CPP_VERSION::IStreamIn;
 
     StreamReader(IStreamIn* stream, size_t bufferSize)
         : mStream(stream), mBufferSize(bufferSize), mData(mBufferSize) {}
@@ -1204,7 +1205,8 @@
     EventFlag* mEfGroup = nullptr;
 };
 
-class InputStreamTest : public OpenStreamTest<::android::hardware::audio::CPP_VERSION::IStreamIn> {
+class InputStreamTest
+    : public OpenStreamTest<::android::hardware::audio::CORE_TYPES_CPP_VERSION::IStreamIn> {
     void SetUp() override {
         ASSERT_NO_FATAL_FAILURE(OpenStreamTest::SetUp());  // setup base
 #if MAJOR_VERSION <= 6
@@ -1226,13 +1228,8 @@
         auto flags = getInputFlags();
         testOpen(
                 [&](AudioIoHandle handle, AudioConfig config, auto cb) {
-#if MAJOR_VERSION < 7 || (MAJOR_VERSION == 7 && MINOR_VERSION == 0)
                     return getDevice()->openInputStream(handle, address, config, flags,
                                                         initMetadata, cb);
-#elif MAJOR_VERSION == 7 && MINOR_VERSION == 1
-                    return getDevice()->openInputStream_7_1(handle, address, config, flags,
-                                                            initMetadata, cb);
-#endif
                 },
                 config);
     }
@@ -1605,8 +1602,9 @@
                             "InputStream::setGain");
 }
 
-static void testPrepareForReading(::android::hardware::audio::CPP_VERSION::IStreamIn* stream,
-                                  uint32_t frameSize, uint32_t framesCount) {
+static void testPrepareForReading(
+        ::android::hardware::audio::CORE_TYPES_CPP_VERSION::IStreamIn* stream, uint32_t frameSize,
+        uint32_t framesCount) {
     Result res;
     // Ignore output parameters as the call should fail
     ASSERT_OK(stream->prepareForReading(frameSize, framesCount,
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/EvChargeState.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/EvChargeState.aidl
new file mode 100644
index 0000000..fe1c240
--- /dev/null
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/EvChargeState.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.automotive.vehicle;
+@Backing(type="int") @VintfStability
+enum EvChargeState {
+  UNKNOWN = 0,
+  CHARGING = 1,
+  FULLY_CHARGED = 2,
+  NOT_CHARGING = 3,
+  ERROR = 4,
+}
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/EvRegenerativeBrakingState.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/EvRegenerativeBrakingState.aidl
new file mode 100644
index 0000000..b869562
--- /dev/null
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/EvRegenerativeBrakingState.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.automotive.vehicle;
+@Backing(type="int") @VintfStability
+enum EvRegenerativeBrakingState {
+  UNKNOWN = 0,
+  DISABLED = 1,
+  PARTIALLY_ENABLED = 2,
+  FULLY_ENABLED = 3,
+}
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/TrailerState.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/TrailerState.aidl
new file mode 100644
index 0000000..2491340
--- /dev/null
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/TrailerState.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.automotive.vehicle;
+@Backing(type="int") @VintfStability
+enum TrailerState {
+  UNKNOWN = 0,
+  NOT_PRESENT = 1,
+  PRESENT = 2,
+  ERROR = 3,
+}
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
index bcb63b6..5cd814c 100644
--- a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -198,4 +198,11 @@
   FRONT_FOG_LIGHTS_SWITCH = 289410876,
   REAR_FOG_LIGHTS_STATE = 289410877,
   REAR_FOG_LIGHTS_SWITCH = 289410878,
+  EV_CHARGE_CURRENT_DRAW_LIMIT = 291508031,
+  EV_CHARGE_PERCENT_LIMIT = 291508032,
+  EV_CHARGE_STATE = 289410881,
+  EV_CHARGE_SWITCH = 287313730,
+  EV_CHARGE_TIME_REMAINING = 289410883,
+  EV_REGENERATIVE_BRAKING_STATE = 289410884,
+  TRAILER_PRESENT = 289410885,
 }
diff --git a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleUnit.aidl b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleUnit.aidl
index 034dec5..c80fdbb 100644
--- a/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleUnit.aidl
+++ b/automotive/vehicle/aidl/aidl_api/android.hardware.automotive.vehicle/current/android/hardware/automotive/vehicle/VehicleUnit.aidl
@@ -60,6 +60,7 @@
   MILLIWATTS = 99,
   AMPERE_HOURS = 100,
   KILOWATT_HOUR = 101,
+  AMPERE = 102,
   KILOPASCAL = 112,
   PSI = 113,
   BAR = 114,
diff --git a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/EvChargeState.aidl b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/EvChargeState.aidl
new file mode 100644
index 0000000..e095fc4
--- /dev/null
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/EvChargeState.aidl
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.automotive.vehicle;
+
+/**
+ * Used by EV charging properties to enumerate the current state of the battery charging.
+ */
+@VintfStability
+@Backing(type="int")
+enum EvChargeState {
+    UNKNOWN = 0,
+    CHARGING = 1,
+    FULLY_CHARGED = 2,
+    NOT_CHARGING = 3,
+    /**
+     * Vehicle not charging due to an error
+     */
+    ERROR = 4,
+}
diff --git a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/EvRegenerativeBrakingState.aidl b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/EvRegenerativeBrakingState.aidl
new file mode 100644
index 0000000..4382287
--- /dev/null
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/EvRegenerativeBrakingState.aidl
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.automotive.vehicle;
+
+/**
+ * Used by the regenerative braking property to enumerate the current state
+ * of the regenerative braking.
+ */
+@VintfStability
+@Backing(type="int")
+enum EvRegenerativeBrakingState {
+    UNKNOWN = 0,
+    DISABLED = 1,
+    PARTIALLY_ENABLED = 2,
+    FULLY_ENABLED = 3,
+}
diff --git a/audio/7.1/IStreamIn.hal b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/TrailerState.aidl
similarity index 62%
copy from audio/7.1/IStreamIn.hal
copy to automotive/vehicle/aidl/android/hardware/automotive/vehicle/TrailerState.aidl
index abebe6a..fd42062 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/TrailerState.aidl
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2022 The Android Open Source Project
+ * Copyright (C) 2021 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -14,9 +14,17 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.automotive.vehicle;
 
-import @7.0::IStreamIn;
-
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * Used by the trailer present property to enumerate the current state
+ * of the trailer.
+ */
+@VintfStability
+@Backing(type="int")
+enum TrailerState {
+    UNKNOWN = 0,
+    NOT_PRESENT = 1,
+    PRESENT = 2,
+    ERROR = 3,
+}
diff --git a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 533c7a2..9dbeae2 100644
--- a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -2724,4 +2724,95 @@
      */
     REAR_FOG_LIGHTS_SWITCH = 0x0F3E + 0x10000000 + 0x01000000
             + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
+
+    /**
+     * Indicates the maximum current draw threshold for charging set by the user
+     *
+     * configArray[0] is used to specify the max current draw allowed by
+     * the vehicle in Amperes.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     * @unit VehicleUnit:AMPERE
+     */
+    EV_CHARGE_CURRENT_DRAW_LIMIT = 0x0F3F + 0x10000000 + 0x01000000
+            + 0x00600000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:FLOAT
+
+    /**
+     * Indicates the maximum charge percent threshold set by the user
+     *
+     * Returns a float value from 0 to 100.
+     *
+     * configArray is used to specify the valid values.
+     *   For example, if the vehicle supports the following charge percent limit values:
+     *     [20, 40, 60, 80, 100]
+     *   then the configArray should be {20, 40, 60, 80, 100}
+     * If the configArray is empty then all values from 0 to 100 must be valid.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    EV_CHARGE_PERCENT_LIMIT = 0x0F40 + 0x10000000 + 0x01000000
+            + 0x00600000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:FLOAT
+
+    /**
+     * Charging state of the car
+     *
+     * Returns the current charging state of the car.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     * @data_enum EvChargeState
+     */
+    EV_CHARGE_STATE = 0x0F41 + 0x10000000 + 0x01000000
+            + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
+
+    /**
+     * Start or stop charging the EV battery
+     *
+     * The setting that the user wants. Setting this property to true starts the battery charging
+     * and setting to false stops charging.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ_WRITE
+     */
+    EV_CHARGE_SWITCH = 0x0F42 + 0x10000000 + 0x01000000
+            + 0x00200000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:BOOLEAN
+
+    /**
+     * Estimated charge time remaining in seconds
+     *
+     * Returns 0 if the vehicle is not charging.
+     *
+     * @change_mode VehiclePropertyChangeMode:CONTINUOUS
+     * @access VehiclePropertyAccess:READ
+     * @unit VehicleUnit:SECS
+     */
+    EV_CHARGE_TIME_REMAINING = 0x0F43 + 0x10000000 + 0x01000000
+            + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
+
+    /**
+     * Regenerative braking or one-pedal drive state of the car
+     *
+     * Returns the current state associated with the regenerative braking
+     * setting in the car
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     * @data_enum EvRegenerativeBrakingState
+     */
+    EV_REGENERATIVE_BRAKING_STATE = 0x0F44 + 0x10000000 + 0x01000000
+            + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
+
+    /**
+     * Indicates if there is a trailer present or not.
+     *
+     * Returns the trailer state of the car.
+     *
+     * @change_mode VehiclePropertyChangeMode:ON_CHANGE
+     * @access VehiclePropertyAccess:READ
+     * @data_enum TrailerState
+     */
+    TRAILER_PRESENT = 0x0F45 + 0x10000000 + 0x01000000
+            + 0x00400000, // VehiclePropertyGroup:SYSTEM,VehicleArea:GLOBAL,VehiclePropertyType:INT32
 }
diff --git a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleUnit.aidl b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleUnit.aidl
index 9c3f8f9..3817b74 100644
--- a/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleUnit.aidl
+++ b/automotive/vehicle/aidl/android/hardware/automotive/vehicle/VehicleUnit.aidl
@@ -51,6 +51,7 @@
     MILLIWATTS = 0x63,
     AMPERE_HOURS = 0x64,
     KILOWATT_HOUR = 0x65,
+    AMPERE = 0x66,
     KILOPASCAL = 0x70,
     PSI = 0x71,
     BAR = 0x72,
diff --git a/bluetooth/audio/2.0/vts/OWNERS b/bluetooth/audio/2.0/vts/OWNERS
deleted file mode 100644
index b266b06..0000000
--- a/bluetooth/audio/2.0/vts/OWNERS
+++ /dev/null
@@ -1,3 +0,0 @@
-include platform/packages/modules/Bluetooth:/OWNERS
-
-cheneyni@google.com
diff --git a/bluetooth/audio/2.1/vts/OWNERS b/bluetooth/audio/2.1/vts/OWNERS
deleted file mode 100644
index b266b06..0000000
--- a/bluetooth/audio/2.1/vts/OWNERS
+++ /dev/null
@@ -1,3 +0,0 @@
-include platform/packages/modules/Bluetooth:/OWNERS
-
-cheneyni@google.com
diff --git a/bluetooth/audio/2.2/IBluetoothAudioProvider.hal b/bluetooth/audio/2.2/IBluetoothAudioProvider.hal
index f577537..7c91805 100644
--- a/bluetooth/audio/2.2/IBluetoothAudioProvider.hal
+++ b/bluetooth/audio/2.2/IBluetoothAudioProvider.hal
@@ -69,4 +69,12 @@
      *    encoding.
      */
     updateAudioConfiguration(AudioConfiguration audioConfig);
+
+    /**
+     * Called when the supported latency mode is updated.
+     *
+     * @param allowed If the peripheral devices can't keep up with low latency
+     * mode, the API will be called with supported is false.
+     */
+    setLowLatencyModeAllowed(bool allowed);
 };
diff --git a/bluetooth/audio/2.2/default/BluetoothAudioProvider.cpp b/bluetooth/audio/2.2/default/BluetoothAudioProvider.cpp
index 202cfb9..62511e9 100644
--- a/bluetooth/audio/2.2/default/BluetoothAudioProvider.cpp
+++ b/bluetooth/audio/2.2/default/BluetoothAudioProvider.cpp
@@ -209,6 +209,18 @@
   return Void();
 }
 
+Return<void> BluetoothAudioProvider::setLowLatencyModeAllowed(bool allowed) {
+  LOG(INFO) << __func__ << " - SessionType=" << toString(session_type_);
+
+  if (stack_iface_ == nullptr) {
+    LOG(INFO) << __func__ << " - SessionType=" << toString(session_type_)
+              << " has NO session";
+    return Void();
+  }
+  LOG(INFO) << __func__ << " allowed: " << allowed;
+  return Void();
+}
+
 }  // namespace implementation
 }  // namespace V2_2
 }  // namespace audio
diff --git a/bluetooth/audio/2.2/default/BluetoothAudioProvider.h b/bluetooth/audio/2.2/default/BluetoothAudioProvider.h
index 425ea3b..90c158e 100644
--- a/bluetooth/audio/2.2/default/BluetoothAudioProvider.h
+++ b/bluetooth/audio/2.2/default/BluetoothAudioProvider.h
@@ -56,6 +56,8 @@
   Return<void> updateAudioConfiguration(
       const AudioConfiguration& audioConfig) override;
 
+  Return<void> setLowLatencyModeAllowed(bool allowed) override;
+
  protected:
   sp<BluetoothAudioDeathRecipient> death_recipient_;
 
diff --git a/bluetooth/audio/aidl/default/OWNERS b/bluetooth/audio/OWNERS
similarity index 98%
rename from bluetooth/audio/aidl/default/OWNERS
rename to bluetooth/audio/OWNERS
index 17ea464..a8e9bda 100644
--- a/bluetooth/audio/aidl/default/OWNERS
+++ b/bluetooth/audio/OWNERS
@@ -1,4 +1,4 @@
 include platform/packages/modules/Bluetooth:/OWNERS
 
 cheneyni@google.com
-aliceypkuo@google.com
\ No newline at end of file
+aliceypkuo@google.com
diff --git a/bluetooth/audio/aidl/Android.bp b/bluetooth/audio/aidl/Android.bp
index 5107240..52671b8 100644
--- a/bluetooth/audio/aidl/Android.bp
+++ b/bluetooth/audio/aidl/Android.bp
@@ -47,6 +47,7 @@
                 "//apex_available:platform",
                 "com.android.bluetooth",
             ],
+            min_sdk_version: "31",
         },
     },
 }
diff --git a/bluetooth/audio/aidl/vts/OWNERS b/bluetooth/audio/aidl/vts/OWNERS
deleted file mode 100644
index 17ea464..0000000
--- a/bluetooth/audio/aidl/vts/OWNERS
+++ /dev/null
@@ -1,4 +0,0 @@
-include platform/packages/modules/Bluetooth:/OWNERS
-
-cheneyni@google.com
-aliceypkuo@google.com
\ No newline at end of file
diff --git a/bluetooth/audio/utils/OWNERS b/bluetooth/audio/utils/OWNERS
deleted file mode 100644
index 17ea464..0000000
--- a/bluetooth/audio/utils/OWNERS
+++ /dev/null
@@ -1,4 +0,0 @@
-include platform/packages/modules/Bluetooth:/OWNERS
-
-cheneyni@google.com
-aliceypkuo@google.com
\ No newline at end of file
diff --git a/camera/common/aidl/Android.bp b/camera/common/aidl/Android.bp
new file mode 100644
index 0000000..eca70aa
--- /dev/null
+++ b/camera/common/aidl/Android.bp
@@ -0,0 +1,19 @@
+aidl_interface {
+    name: "android.hardware.camera.common",
+    vendor_available: true,
+    srcs: ["android/hardware/camera/common/*.aidl"],
+    stability: "vintf",
+    backend: {
+        cpp: {
+            enabled: false,
+        },
+        java: {
+            enabled: false,
+        },
+        ndk: {
+            vndk: {
+                enabled: true,
+            },
+        },
+    },
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraDeviceStatus.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraDeviceStatus.aidl
new file mode 100644
index 0000000..a53a914
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraDeviceStatus.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@Backing(type="int") @VintfStability
+enum CameraDeviceStatus {
+  NOT_PRESENT = 0,
+  PRESENT = 1,
+  ENUMERATING = 2,
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraMetadataType.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraMetadataType.aidl
new file mode 100644
index 0000000..287dea3
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraMetadataType.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@Backing(type="int") @VintfStability
+enum CameraMetadataType {
+  BYTE = 0,
+  INT32 = 1,
+  FLOAT = 2,
+  INT64 = 3,
+  DOUBLE = 4,
+  RATIONAL = 5,
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraResourceCost.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraResourceCost.aidl
new file mode 100644
index 0000000..467f451
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/CameraResourceCost.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@VintfStability
+parcelable CameraResourceCost {
+  int resourceCost;
+  String[] conflictingDevices;
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/Status.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/Status.aidl
new file mode 100644
index 0000000..e1ec189
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/Status.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@Backing(type="int") @VintfStability
+enum Status {
+  OK = 0,
+  ILLEGAL_ARGUMENT = 1,
+  CAMERA_IN_USE = 2,
+  MAX_CAMERAS_IN_USE = 3,
+  METHOD_NOT_SUPPORTED = 4,
+  OPERATION_NOT_SUPPORTED = 5,
+  CAMERA_DISCONNECTED = 6,
+  INTERNAL_ERROR = 7,
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/TagBoundaryId.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/TagBoundaryId.aidl
new file mode 100644
index 0000000..2c6b500
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/TagBoundaryId.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@Backing(type="long") @VintfStability
+enum TagBoundaryId {
+  AOSP = 0,
+  VENDOR = -2147483648,
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/TorchModeStatus.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/TorchModeStatus.aidl
new file mode 100644
index 0000000..cb1a2ae
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/TorchModeStatus.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@Backing(type="int") @VintfStability
+enum TorchModeStatus {
+  NOT_AVAILABLE = 0,
+  AVAILABLE_OFF = 1,
+  AVAILABLE_ON = 2,
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/VendorTag.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/VendorTag.aidl
new file mode 100644
index 0000000..b8b4ef4
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/VendorTag.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@VintfStability
+parcelable VendorTag {
+  int tagId;
+  String tagName;
+  android.hardware.camera.common.CameraMetadataType tagType;
+}
diff --git a/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/VendorTagSection.aidl b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/VendorTagSection.aidl
new file mode 100644
index 0000000..140fba4
--- /dev/null
+++ b/camera/common/aidl/aidl_api/android.hardware.camera.common/current/android/hardware/camera/common/VendorTagSection.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.common;
+@VintfStability
+parcelable VendorTagSection {
+  String sectionName;
+  android.hardware.camera.common.VendorTag[] tags;
+}
diff --git a/camera/common/aidl/android/hardware/camera/common/CameraDeviceStatus.aidl b/camera/common/aidl/android/hardware/camera/common/CameraDeviceStatus.aidl
new file mode 100644
index 0000000..0e88ea8
--- /dev/null
+++ b/camera/common/aidl/android/hardware/camera/common/CameraDeviceStatus.aidl
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.common;
+
+/**
+ * CameraDeviceStatus
+ *
+ * The current status of a camera device, as sent by a camera provider HAL
+ * through the ICameraProviderCallback::cameraDeviceStatusChange() call.
+ *
+ * At startup, the camera service must assume all internal camera devices listed
+ * by ICameraProvider::getCameraIdList() are in the PRESENT state. The provider
+ * must invoke ICameraProviderCallback::cameraDeviceStatusChange to inform the
+ * service of any initially NOT_PRESENT internal devices, and of any PRESENT
+ * external camera devices, as soon as the camera service has called
+ * ICameraProvider::setCallback().
+ *
+ * Allowed state transitions:
+ *      PRESENT            -> NOT_PRESENT
+ *      NOT_PRESENT        -> ENUMERATING
+ *      NOT_PRESENT        -> PRESENT
+ *      ENUMERATING        -> PRESENT
+ *      ENUMERATING        -> NOT_PRESENT
+ */
+@VintfStability
+@Backing(type="int")
+enum CameraDeviceStatus {
+    /**
+     * The camera device is not currently connected, and trying to reference it
+     * in provider method calls must return status code ILLEGAL_ARGUMENT.
+     *
+     */
+    NOT_PRESENT = 0,
+    /**
+     * The camera device is connected, and opening it is possible, as long as
+     * sufficient resources are available.
+     *
+     * By default, the framework must assume all devices returned by
+     * ICameraProvider::getCameraIdList() are in this state.
+     */
+    PRESENT = 1,
+    /**
+     * The camera device is connected, but it is undergoing enumeration and
+     * startup, and so opening the device must return CAMERA_IN_USE.
+     *
+     * Attempting to call ICameraProvider::getCameraCharacteristics() must
+     * succeed, however.
+     */
+    ENUMERATING = 2,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/common/aidl/android/hardware/camera/common/CameraMetadataType.aidl
similarity index 60%
copy from audio/7.1/IStreamIn.hal
copy to camera/common/aidl/android/hardware/camera/common/CameraMetadataType.aidl
index abebe6a..522bf9c 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/common/aidl/android/hardware/camera/common/CameraMetadataType.aidl
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2022 The Android Open Source Project
+ * Copyright (C) 2021 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -14,9 +14,19 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.common;
 
-import @7.0::IStreamIn;
-
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * Camera metadata type - duplicated from VNDK libcamera_metadata for vendor tag
+ * definitions.
+ */
+@VintfStability
+@Backing(type="int")
+enum CameraMetadataType {
+    BYTE = 0,
+    INT32 = 1,
+    FLOAT = 2,
+    INT64 = 3,
+    DOUBLE = 4,
+    RATIONAL = 5,
+}
diff --git a/camera/common/aidl/android/hardware/camera/common/CameraResourceCost.aidl b/camera/common/aidl/android/hardware/camera/common/CameraResourceCost.aidl
new file mode 100644
index 0000000..a471c99
--- /dev/null
+++ b/camera/common/aidl/android/hardware/camera/common/CameraResourceCost.aidl
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.common;
+
+/**
+ * CameraResourceCost:
+ *
+ * Structure defining the abstract resource cost of opening a camera device,
+ * and any usage conflicts between multiple camera devices.
+ *
+ * Obtainable via ICameraDevice::getResourceCost()
+ */
+@VintfStability
+parcelable CameraResourceCost {
+    /**
+     * The total resource "cost" of using this camera, represented as an integer
+     * value in the range [0, 100] where 100 represents total usage of the
+     * shared resource that is the limiting bottleneck of the camera subsystem.
+     * This may be a very rough estimate, and is used as a hint to the camera
+     * service to determine when to disallow multiple applications from
+     * simultaneously opening different cameras advertised by the camera
+     * service.
+     *
+     * The camera service must be able to simultaneously open and use any
+     * combination of camera devices exposed by the HAL where the sum of
+     * the resource costs of these cameras is <= 100. For determining cost,
+     * each camera device must be assumed to be configured and operating at
+     * the maximally resource-consuming framerate and stream size settings
+     * available in the configuration settings exposed for that device through
+     * the camera metadata.
+     *
+     * The camera service may still attempt to simultaneously open combinations
+     * of camera devices with a total resource cost > 100. This may succeed or
+     * fail. If this succeeds, combinations of configurations that are not
+     * supported due to resource constraints from having multiple open devices
+     * must fail during the configure calls. If the total resource cost is <=
+     * 100, open and configure must never fail for any stream configuration
+     * settings or other device capabilities that would normally succeed for a
+     * device when it is the only open camera device.
+     *
+     * This field may be used to determine whether background applications are
+     * allowed to use this camera device while other applications are using
+     * other camera devices. Note: multiple applications must never be allowed
+     * by the camera service to simultaneously open the same camera device.
+     *
+     * Example use cases:
+     *
+     * Ex. 1: Camera Device 0 = Back Camera
+     *        Camera Device 1 = Front Camera
+     *   - Using both camera devices causes a large framerate slowdown due to
+     *     limited ISP bandwidth.
+     *
+     *   Configuration:
+     *
+     *   Camera Device 0 - resourceCost = 51
+     *                     conflicting_devices = empty
+     *   Camera Device 1 - resourceCost = 51
+     *                     conflicting_devices = empty
+     *
+     *   Result:
+     *
+     *   Since the sum of the resource costs is > 100, if a higher-priority
+     *   application has either device open, no lower-priority applications must
+     *   be allowed by the camera service to open either device. If a
+     *   lower-priority application is using a device that a higher-priority
+     *   subsequently attempts to open, the lower-priority application must be
+     *   forced to disconnect the device.
+     *
+     *   If the highest-priority application chooses, it may still attempt to
+     *   open both devices (since these devices are not listed as conflicting in
+     *   the conflicting_devices fields), but usage of these devices may fail in
+     *   the open or configure calls.
+     *
+     * Ex. 2: Camera Device 0 = Left Back Camera
+     *        Camera Device 1 = Right Back Camera
+     *        Camera Device 2 = Combined stereo camera using both right and left
+     *                          back camera sensors used by devices 0, and 1
+     *        Camera Device 3 = Front Camera
+     *   - Due to do hardware constraints, up to two cameras may be open at
+     *     once. The combined stereo camera may never be used at the same time
+     *     as either of the two back camera devices (device 0, 1), and typically
+     *     requires too much bandwidth to use at the same time as the front
+     *     camera (device 3).
+     *
+     *   Configuration:
+     *
+     *   Camera Device 0 - resourceCost = 50
+     *                     conflicting_devices = { 2 }
+     *   Camera Device 1 - resourceCost = 50
+     *                     conflicting_devices = { 2 }
+     *   Camera Device 2 - resourceCost = 100
+     *                     conflicting_devices = { 0, 1 }
+     *   Camera Device 3 - resourceCost = 50
+     *                     conflicting_devices = empty
+     *
+     *   Result:
+     *
+     *   Based on the conflicting_devices fields, the camera service guarantees
+     *   that the following sets of open devices must never be allowed: { 1, 2
+     *   }, { 0, 2 }.
+     *
+     *   Based on the resourceCost fields, if a high-priority foreground
+     *   application is using camera device 0, a background application would be
+     *   allowed to open camera device 1 or 3 (but would be forced to disconnect
+     *   it again if the foreground application opened another device).
+     *
+     *   The highest priority application may still attempt to simultaneously
+     *   open devices 0, 2, and 3, but the HAL may fail in open or configure
+     *   calls for this combination.
+     *
+     * Ex. 3: Camera Device 0 = Back Camera
+     *        Camera Device 1 = Front Camera
+     *        Camera Device 2 = Low-power Front Camera that uses the same sensor
+     *                          as device 1, but only exposes image stream
+     *                          resolutions that can be used in low-power mode
+     *  - Using both front cameras (device 1, 2) at the same time is impossible
+     *    due a shared physical sensor. Using the back and "high-power" front
+     *    camera (device 1) may be impossible for some stream configurations due
+     *    to hardware limitations, but the "low-power" front camera option may
+     *    always be used as it has special dedicated hardware.
+     *
+     *   Configuration:
+     *
+     *   Camera Device 0 - resourceCost = 100
+     *                     conflicting_devices = empty
+     *   Camera Device 1 - resourceCost = 100
+     *                     conflicting_devices = { 2 }
+     *   Camera Device 2 - resourceCost = 0
+     *                     conflicting_devices = { 1 }
+     *   Result:
+     *
+     *   Based on the conflicting_devices fields, the camera service guarantees
+     *   that the following sets of open devices must never be allowed:
+     *   { 1, 2 }.
+     *
+     *   Based on the resourceCost fields, only the highest priority application
+     *   may attempt to open both device 0 and 1 at the same time. If a
+     *   higher-priority application is not using device 1 or 2, a low-priority
+     *   background application may open device 2 (but must be forced to
+     *   disconnect it if a higher-priority application subsequently opens
+     *   device 1 or 2).
+     */
+    int resourceCost;
+    /**
+     * An array of camera device IDs indicating other devices that cannot be
+     * simultaneously opened while this camera device is in use.
+     *
+     * This field is intended to be used to indicate that this camera device
+     * is a composite of several other camera devices, or otherwise has
+     * hardware dependencies that prohibit simultaneous usage. If there are no
+     * dependencies, an empty list may be returned to indicate this.
+     *
+     * The camera service must never simultaneously open any of the devices
+     * in this list while this camera device is open.
+     *
+     */
+    String[] conflictingDevices;
+}
diff --git a/camera/common/aidl/android/hardware/camera/common/Status.aidl b/camera/common/aidl/android/hardware/camera/common/Status.aidl
new file mode 100644
index 0000000..1ea6ee8
--- /dev/null
+++ b/camera/common/aidl/android/hardware/camera/common/Status.aidl
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.common;
+
+/**
+ * Common enumeration and structure definitions for all HALs under
+ * android.hardware.camera
+ *
+ *
+ * Status codes for camera HAL method service specific errors.
+ *
+ */
+@VintfStability
+@Backing(type="int")
+enum Status {
+    /**
+     * Method call succeeded
+     */
+    OK = 0,
+    /**
+     * One of the arguments to the method call is invalid. For example,
+     * the camera ID is unknown.
+     */
+    ILLEGAL_ARGUMENT = 1,
+    /**
+     * The specified camera device is already in use
+     */
+    CAMERA_IN_USE = 2,
+    /**
+     * The HAL cannot support more simultaneous cameras in use.
+     */
+    MAX_CAMERAS_IN_USE = 3,
+    /**
+     * This HAL does not support this method.
+     */
+    METHOD_NOT_SUPPORTED = 4,
+    /**
+     * The specified camera device does not support this operation.
+     */
+    OPERATION_NOT_SUPPORTED = 5,
+    /**
+     * This camera device is no longer connected or otherwise available for use
+     */
+    CAMERA_DISCONNECTED = 6,
+    /**
+     * The HAL has encountered an internal error and cannot complete the
+     * request.
+     */
+    INTERNAL_ERROR = 7,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/common/aidl/android/hardware/camera/common/TagBoundaryId.aidl
similarity index 73%
copy from audio/7.1/IStreamIn.hal
copy to camera/common/aidl/android/hardware/camera/common/TagBoundaryId.aidl
index abebe6a..f81e5b6 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/common/aidl/android/hardware/camera/common/TagBoundaryId.aidl
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2022 The Android Open Source Project
+ * Copyright (C) 2021 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -14,9 +14,11 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.common;
 
-import @7.0::IStreamIn;
-
-interface IStreamIn extends @7.0::IStreamIn {
-};
+@VintfStability
+@Backing(type="long")
+enum TagBoundaryId {
+    AOSP = 0x0,
+    VENDOR = 0x80000000,
+}
diff --git a/camera/common/aidl/android/hardware/camera/common/TorchModeStatus.aidl b/camera/common/aidl/android/hardware/camera/common/TorchModeStatus.aidl
new file mode 100644
index 0000000..42a8816
--- /dev/null
+++ b/camera/common/aidl/android/hardware/camera/common/TorchModeStatus.aidl
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2021 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.common;
+
+/**
+ * TorchModeStatus:
+ *
+ * The current status of the torch mode on a given camera device, sent by a
+ * camera provider HAL via the ICameraProviderCallback::TorchModeStatusChange()
+ * call.
+ *
+ * The torch mode status of a camera device is applicable only when the camera
+ * device is present. The camera service must not call
+ * ICameraProvider::setTorchMode() to turn on torch mode of a camera device if
+ * the camera device is not present. At camera service startup time, the
+ * framework must assume torch modes are in the AVAILABLE_OFF state if the
+ * camera device is present and the camera characteristics entry
+ * android.flash.info.available is reported as true via
+ * ICameraProvider::getCameraCharacteristics() call. The same is assumed for
+ * external camera devices when they are initially connected.
+ *
+ * The camera service requires the following behaviors from the camera provider
+ * HAL when a camera device's status changes:
+ *
+ *  1. A previously-disconnected camera device becomes connected. After
+ *      ICameraProviderCallback::CameraDeviceStatusChange() is invoked to inform
+ *      the camera service that the camera device is present, the framework must
+ *      assume the camera device's torch mode is in AVAILABLE_OFF state if it
+ *      has a flash unit. The camera provider HAL does not need to invoke
+ *      ICameraProviderCallback::TorchModeStatusChange() unless the flash unit
+ *      is unavailable to use by ICameraProvider::setTorchMode().
+ *
+ *  2. A previously-connected camera becomes disconnected. After
+ *      ICameraProviderCallback::CameraDeviceStatusChange() is invoked to inform
+ *      the camera service that the camera device is not present, the framework
+ *      must not call ICameraProvider::setTorchMode() for the disconnected camera
+ *      device until it is connected again. The camera provider HAL does not
+ *      need to invoke ICameraProviderCallback::TorchModeStatusChange()
+ *      separately to inform that the flash unit has become NOT_AVAILABLE.
+ *
+ *  3. openCameraDevice() or openCameraDeviceVersion() is called to open a
+ *      camera device. The camera provider HAL must invoke
+ *      ICameraProviderCallback::TorchModeStatusChange() for all flash units
+ *      that have entered NOT_AVAILABLE state and can not be turned on by
+ *      calling ICameraProvider::setTorchMode() due to this open() call.
+ *      openCameraDevice() must not trigger AVAILABLE_OFF before NOT_AVAILABLE
+ *      for all flash units that have become unavailable.
+ *
+ *  4. ICameraDevice.close() is called to close a camera device. The camera
+ *      provider HAL must call ICameraProviderCallback::torchModeStatusChange()
+ *      for all flash units that have now entered the AVAILABLE_OFF state and
+ *      can be turned on by calling ICameraProvider::setTorchMode() again because
+ *      of sufficient new camera resources being freed up by this close() call.
+ *
+ *  Note that the camera service calling ICameraProvider::setTorchMode()
+ *  successfully must trigger AVAILABLE_OFF or AVAILABLE_ON callback for the
+ *  given camera device. Additionally it must trigger AVAILABLE_OFF callbacks
+ *  for other previously-on torch modes if HAL cannot keep multiple devices'
+ *  flashlights on simultaneously.
+ */
+@VintfStability
+@Backing(type="int")
+enum TorchModeStatus {
+    /**
+     * The flash unit is no longer available and the torch mode can not be
+     * turned on by calling setTorchMode(). If the torch mode was AVAILABLE_ON,
+     * the flashlight must be turned off by the provider HAL before the provider
+     * HAL calls torchModeStatusChange().
+     */
+    NOT_AVAILABLE = 0,
+    /**
+     * A torch mode has become off and is available to be turned on via
+     * ICameraProvider::setTorchMode(). This may happen in the following
+     * cases:
+     *   1. After the resources to turn on the torch mode have become available.
+     *   2. After ICameraProvider::setTorchMode() is called to turn off the torch
+     *      mode.
+     *   3. After the camera service turned on the torch mode for some other
+     *      camera device and the provider HAL had to turn off the torch modes
+     *      of other camera device(s) that were previously on, due to lack of
+     *      resources to keep them all on.
+     */
+    AVAILABLE_OFF = 1,
+    /**
+     * A torch mode has become on and is available to be turned off via
+     * ICameraProvider::setTorchMode(). This can happen only after
+     * ICameraProvider::setTorchMode() has been called to turn on the torch mode.
+     */
+    AVAILABLE_ON = 2,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/common/aidl/android/hardware/camera/common/VendorTag.aidl
similarity index 60%
copy from audio/7.1/IStreamIn.hal
copy to camera/common/aidl/android/hardware/camera/common/VendorTag.aidl
index abebe6a..1de2fbf 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/common/aidl/android/hardware/camera/common/VendorTag.aidl
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2022 The Android Open Source Project
+ * Copyright (C) 2021 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -14,9 +14,17 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.common;
 
-import @7.0::IStreamIn;
+import android.hardware.camera.common.CameraMetadataType;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * A single vendor-unique metadata tag.
+ * The full name of the tag is <sectionName>.<tagName>
+ */
+@VintfStability
+parcelable VendorTag {
+    int tagId;
+    String tagName;
+    CameraMetadataType tagType;
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/common/aidl/android/hardware/camera/common/VendorTagSection.aidl
similarity index 66%
copy from audio/7.1/IStreamIn.hal
copy to camera/common/aidl/android/hardware/camera/common/VendorTagSection.aidl
index abebe6a..010eebc 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/common/aidl/android/hardware/camera/common/VendorTagSection.aidl
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2022 The Android Open Source Project
+ * Copyright (C) 2021 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -14,9 +14,15 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.common;
 
-import @7.0::IStreamIn;
+import android.hardware.camera.common.VendorTag;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * A set of related vendor tags.
+ */
+@VintfStability
+parcelable VendorTagSection {
+    String sectionName;
+    VendorTag[] tags;
+}
diff --git a/camera/device/3.8/ICameraDevice.hal b/camera/device/3.8/ICameraDevice.hal
index 8832c68..09edb8b 100644
--- a/camera/device/3.8/ICameraDevice.hal
+++ b/camera/device/3.8/ICameraDevice.hal
@@ -113,7 +113,8 @@
      *
      * Identical to @3.7::ICameraDevice.isStreamCombinationSupported, except
      * that it takes a @3.8::StreamConfiguration parameter, which could contain
-     * additional information about a specific 10-bit dynamic range profile.
+     * additional information about a specific 10-bit dynamic range profile or
+     * stream use case.
      *
      */
     isStreamCombinationSupported_3_8(StreamConfiguration streams)
diff --git a/camera/device/3.8/ICameraDeviceSession.hal b/camera/device/3.8/ICameraDeviceSession.hal
index 88e4338..c3aa836 100644
--- a/camera/device/3.8/ICameraDeviceSession.hal
+++ b/camera/device/3.8/ICameraDeviceSession.hal
@@ -35,6 +35,8 @@
      *
      * - The requestedConfiguration allows the camera framework to configure
      *   10-bit dynamic range profile.
+     * - The requestedConfiguration allows the camera framework to configure
+     *   stream use cases.
      *
      * @return status Status code for the operation, one of:
      *     OK:
@@ -61,6 +63,7 @@
      *             input stream.
      *           - Invalid combination between a 10-bit dynamic range profile
      *             and none impl. defined 8-bit format for a particular stream.
+     *           - Unsupported stream use case
      *         The camera service cannot filter out all possible illegal stream
      *         configurations, since some devices may support more simultaneous
      *         streams or larger stream resolutions than the minimum required
diff --git a/camera/device/3.8/types.hal b/camera/device/3.8/types.hal
index 9d1ac22..04a2450 100644
--- a/camera/device/3.8/types.hal
+++ b/camera/device/3.8/types.hal
@@ -17,6 +17,7 @@
 package android.hardware.camera.device@3.8;
 
 import @3.2::ErrorMsg;
+import @3.2::CameraMetadata;
 import @3.2::MsgType;
 import @3.2::ShutterMsg;
 import @3.2::CameraMetadata;
@@ -24,6 +25,7 @@
 import @3.7::Stream;
 
 import android.hardware.camera.metadata@3.8::CameraMetadataEnumAndroidRequestAvailableDynamicRangeProfilesMap;
+import android.hardware.camera.metadata@3.8::CameraMetadataEnumAndroidScalerAvailableStreamUseCases;
 
 /**
  * ShutterMsg:
@@ -80,7 +82,8 @@
  * by the framework by its buffer resolution and format, and additionally by the
  * HAL with the gralloc usage flags and the maximum in-flight buffer count.
  *
- * This version extends the @3.7 Stream with the dynamic range profile field.
+ * This version extends the @3.7 Stream with the dynamic range profile and the
+ * stream use case field.
  */
 struct Stream {
     /**
@@ -98,6 +101,25 @@
      *
      */
     CameraMetadataEnumAndroidRequestAvailableDynamicRangeProfilesMap dynamicRangeProfile;
+
+    /**
+     * The stream use case describing the stream's purpose
+     *
+     * This flag provides the camera device a hint on what user scenario this
+     * stream is intended for. With this flag, the camera device can optimize
+     * camera pipeline parameters, such as tuning, sensor mode, and ISP settings,
+     * for the intended use case.
+     *
+     * When this field is set to DEFAULT, the camera device should behave in
+     * the same way as in previous HAL versions, and optimize the camera pipeline
+     * based on stream format, data space, usage flag, and other stream properties.
+     *
+     * The HAL reports supported stream use cases in
+     * ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES. If the HAL doesn't support
+     * setting stream use cases, the camera framework leaves this field as
+     * DEFAULT.
+     */
+    CameraMetadataEnumAndroidScalerAvailableStreamUseCases useCase;
 };
 
 /**
@@ -115,7 +137,6 @@
 
     /**
      * The definition of operation mode from prior version.
-     *
      */
     @3.2::StreamConfigurationMode operationMode;
 
@@ -130,17 +151,7 @@
     uint32_t streamConfigCounter;
 
     /**
-     * If an input stream is configured, whether the input stream is expected to
-     * receive variable resolution images.
-     *
-     * This flag can only be set to true if the camera device supports
-     * multi-resolution input streams by advertising input stream configurations in
-     * physicalCameraMultiResolutionStreamConfigurations in its physical cameras'
-     * characteristics.
-     *
-     * When this flag is set to true, the input stream's width and height can be
-     * any one of the supported multi-resolution input stream sizes.
+     * The definition of multi-resolution input image flag from prior version.
      */
     bool multiResolutionInputImage;
 };
-
diff --git a/camera/device/aidl/Android.bp b/camera/device/aidl/Android.bp
new file mode 100644
index 0000000..b6cbea4
--- /dev/null
+++ b/camera/device/aidl/Android.bp
@@ -0,0 +1,27 @@
+aidl_interface {
+    name: "android.hardware.camera.device",
+    vendor_available: true,
+    srcs: ["android/hardware/camera/device/*.aidl"],
+    stability: "vintf",
+    imports: [
+        "android.hardware.common-V2",
+        "android.hardware.common.fmq-V1",
+        "android.hardware.camera.common",
+        "android.hardware.camera.metadata",
+        "android.hardware.graphics.common"
+    ],
+    backend: {
+        cpp: {
+            enabled: false,
+        },
+        java: {
+            sdk_version: "module_current",
+            enabled: false,
+        },
+        ndk: {
+            vndk: {
+                enabled: true,
+            },
+        },
+    },
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferCache.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferCache.aidl
new file mode 100644
index 0000000..9439172
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferCache.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable BufferCache {
+  int streamId;
+  long bufferId;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferRequest.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferRequest.aidl
new file mode 100644
index 0000000..c40a24a
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferRequest.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable BufferRequest {
+  int streamId;
+  int numBuffersRequested;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferRequestStatus.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferRequestStatus.aidl
new file mode 100644
index 0000000..72fb61b
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferRequestStatus.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum BufferRequestStatus {
+  OK = 0,
+  FAILED_PARTIAL = 1,
+  FAILED_CONFIGURING = 2,
+  FAILED_ILLEGAL_ARGUMENTS = 3,
+  FAILED_UNKNOWN = 4,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferStatus.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferStatus.aidl
new file mode 100644
index 0000000..43a2b35
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/BufferStatus.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum BufferStatus {
+  OK = 0,
+  ERROR = 1,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraBlob.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraBlob.aidl
new file mode 100644
index 0000000..520181c
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraBlob.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable CameraBlob {
+  android.hardware.camera.device.CameraBlobId blobId;
+  int blobSizeBytes;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraBlobId.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraBlobId.aidl
new file mode 100644
index 0000000..632499d
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraBlobId.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum CameraBlobId {
+  JPEG = 255,
+  JPEG_APP_SEGMENTS = 256,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraMetadata.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraMetadata.aidl
new file mode 100644
index 0000000..b96d69e
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraMetadata.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable CameraMetadata {
+  byte[] metadata;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraOfflineSessionInfo.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraOfflineSessionInfo.aidl
new file mode 100644
index 0000000..1ad8e11
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CameraOfflineSessionInfo.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable CameraOfflineSessionInfo {
+  android.hardware.camera.device.OfflineStream[] offlineStreams;
+  android.hardware.camera.device.OfflineRequest[] offlineRequests;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CaptureRequest.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CaptureRequest.aidl
new file mode 100644
index 0000000..6b5b256
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CaptureRequest.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable CaptureRequest {
+  int frameNumber;
+  long fmqSettingsSize;
+  android.hardware.camera.device.CameraMetadata settings;
+  android.hardware.camera.device.StreamBuffer inputBuffer;
+  int inputWidth;
+  int inputHeight;
+  android.hardware.camera.device.StreamBuffer[] outputBuffers;
+  android.hardware.camera.device.PhysicalCameraSetting[] physicalCameraSettings;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CaptureResult.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CaptureResult.aidl
new file mode 100644
index 0000000..a820e2c
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/CaptureResult.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable CaptureResult {
+  int frameNumber;
+  long fmqResultSize;
+  android.hardware.camera.device.CameraMetadata result;
+  android.hardware.camera.device.StreamBuffer[] outputBuffers;
+  android.hardware.camera.device.StreamBuffer inputBuffer;
+  int partialResult;
+  android.hardware.camera.device.PhysicalCameraMetadata[] physicalCameraMetadata;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ErrorCode.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ErrorCode.aidl
new file mode 100644
index 0000000..2f9887a
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ErrorCode.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum ErrorCode {
+  ERROR_DEVICE = 1,
+  ERROR_REQUEST = 2,
+  ERROR_RESULT = 3,
+  ERROR_BUFFER = 4,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ErrorMsg.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ErrorMsg.aidl
new file mode 100644
index 0000000..b2e9512
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ErrorMsg.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable ErrorMsg {
+  int frameNumber;
+  int errorStreamId;
+  android.hardware.camera.device.ErrorCode errorCode;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/HalStream.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/HalStream.aidl
new file mode 100644
index 0000000..a5784bc
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/HalStream.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable HalStream {
+  int id;
+  android.hardware.graphics.common.PixelFormat overrideFormat;
+  android.hardware.graphics.common.BufferUsage producerUsage;
+  android.hardware.graphics.common.BufferUsage consumerUsage;
+  int maxBuffers;
+  android.hardware.graphics.common.Dataspace overrideDataSpace;
+  String physicalCameraId;
+  boolean supportOffline;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDevice.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDevice.aidl
new file mode 100644
index 0000000..80bfc3c
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDevice.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+interface ICameraDevice {
+  void dumpState(in ParcelFileDescriptor fd);
+  android.hardware.camera.device.CameraMetadata getCameraCharacteristics();
+  android.hardware.camera.device.CameraMetadata getPhysicalCameraCharacteristics(in String physicalCameraId);
+  android.hardware.camera.common.CameraResourceCost getResourceCost();
+  boolean isStreamCombinationSupported(in android.hardware.camera.device.StreamConfiguration streams);
+  android.hardware.camera.device.ICameraDeviceSession open(in android.hardware.camera.device.ICameraDeviceCallback callback);
+  android.hardware.camera.device.ICameraInjectionSession openInjectionSession(in android.hardware.camera.device.ICameraDeviceCallback callback);
+  void setTorchMode(boolean on);
+  void turnOnTorchWithStrengthLevel(int torchStrength);
+  int getTorchStrengthLevel();
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDeviceCallback.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDeviceCallback.aidl
new file mode 100644
index 0000000..7b79c6c
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDeviceCallback.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+interface ICameraDeviceCallback {
+  void notify(in android.hardware.camera.device.NotifyMsg[] msgs);
+  void processCaptureResult(in android.hardware.camera.device.CaptureResult[] results);
+  android.hardware.camera.device.BufferRequestStatus requestStreamBuffers(in android.hardware.camera.device.BufferRequest[] bufReqs, out android.hardware.camera.device.StreamBufferRet[] buffers);
+  void returnStreamBuffers(in android.hardware.camera.device.StreamBuffer[] buffers);
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDeviceSession.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDeviceSession.aidl
new file mode 100644
index 0000000..2196d37
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraDeviceSession.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+interface ICameraDeviceSession {
+  void close();
+  android.hardware.camera.device.HalStream[] configureStreams(in android.hardware.camera.device.StreamConfiguration requestedConfiguration);
+  android.hardware.camera.device.CameraMetadata constructDefaultRequestSettings(in android.hardware.camera.device.RequestTemplate type);
+  void flush();
+  android.hardware.common.fmq.MQDescriptor<byte,android.hardware.common.fmq.SynchronizedReadWrite> getCaptureRequestMetadataQueue();
+  android.hardware.common.fmq.MQDescriptor<byte,android.hardware.common.fmq.SynchronizedReadWrite> getCaptureResultMetadataQueue();
+  boolean isReconfigurationRequired(in android.hardware.camera.device.CameraMetadata oldSessionParams, in android.hardware.camera.device.CameraMetadata newSessionParams);
+  int processCaptureRequest(in android.hardware.camera.device.CaptureRequest[] requests, in android.hardware.camera.device.BufferCache[] cachesToRemove);
+  oneway void signalStreamFlush(in int[] streamIds, in int streamConfigCounter);
+  android.hardware.camera.device.ICameraOfflineSession switchToOffline(in int[] streamsToKeep, out android.hardware.camera.device.CameraOfflineSessionInfo offlineSessionInfo);
+  void repeatingRequestEnd(in int frameNumber, in int[] streamIds);
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraInjectionSession.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraInjectionSession.aidl
new file mode 100644
index 0000000..80f74f3
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraInjectionSession.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+interface ICameraInjectionSession {
+  void configureInjectionStreams(in android.hardware.camera.device.StreamConfiguration requestedConfiguration, in android.hardware.camera.device.CameraMetadata characteristics);
+  android.hardware.camera.device.ICameraDeviceSession getCameraDeviceSession();
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraOfflineSession.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraOfflineSession.aidl
new file mode 100644
index 0000000..727d856
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ICameraOfflineSession.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+interface ICameraOfflineSession {
+  void close();
+  android.hardware.common.fmq.MQDescriptor<byte,android.hardware.common.fmq.SynchronizedReadWrite> getCaptureResultMetadataQueue();
+  void setCallback(in android.hardware.camera.device.ICameraDeviceCallback cb);
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/NotifyMsg.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/NotifyMsg.aidl
new file mode 100644
index 0000000..3ad7e52
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/NotifyMsg.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+union NotifyMsg {
+  android.hardware.camera.device.ErrorMsg error;
+  android.hardware.camera.device.ShutterMsg shutter;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/OfflineRequest.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/OfflineRequest.aidl
new file mode 100644
index 0000000..6e6f29d
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/OfflineRequest.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable OfflineRequest {
+  int frameNumber;
+  int[] pendingStreams;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/OfflineStream.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/OfflineStream.aidl
new file mode 100644
index 0000000..54cb1fe
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/OfflineStream.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable OfflineStream {
+  int id;
+  int numOutstandingBuffers;
+  long[] circulatingBufferIds;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/PhysicalCameraMetadata.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/PhysicalCameraMetadata.aidl
new file mode 100644
index 0000000..3d66ab8
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/PhysicalCameraMetadata.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable PhysicalCameraMetadata {
+  long fmqMetadataSize;
+  String physicalCameraId;
+  android.hardware.camera.device.CameraMetadata metadata;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/PhysicalCameraSetting.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/PhysicalCameraSetting.aidl
new file mode 100644
index 0000000..a6c241d
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/PhysicalCameraSetting.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable PhysicalCameraSetting {
+  long fmqSettingsSize;
+  String physicalCameraId;
+  android.hardware.camera.device.CameraMetadata settings;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/RequestTemplate.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/RequestTemplate.aidl
new file mode 100644
index 0000000..b70b899
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/RequestTemplate.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum RequestTemplate {
+  PREVIEW = 1,
+  STILL_CAPTURE = 2,
+  VIDEO_RECORD = 3,
+  VIDEO_SNAPSHOT = 4,
+  ZERO_SHUTTER_LAG = 5,
+  MANUAL = 6,
+  VENDOR_TEMPLATE_START = 1073741824,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ShutterMsg.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ShutterMsg.aidl
new file mode 100644
index 0000000..ce059ac
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/ShutterMsg.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable ShutterMsg {
+  int frameNumber;
+  long timestamp;
+  long readoutTimestamp;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/Stream.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/Stream.aidl
new file mode 100644
index 0000000..9263a03
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/Stream.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable Stream {
+  int id;
+  android.hardware.camera.device.StreamType streamType;
+  int width;
+  int height;
+  android.hardware.graphics.common.PixelFormat format;
+  android.hardware.graphics.common.BufferUsage usage;
+  android.hardware.graphics.common.Dataspace dataSpace;
+  android.hardware.camera.device.StreamRotation rotation;
+  String physicalCameraId;
+  int bufferSize;
+  int groupId;
+  android.hardware.camera.metadata.SensorPixelMode[] sensorPixelModesUsed;
+  android.hardware.camera.metadata.RequestAvailableDynamicRangeProfilesMap dynamicRangeProfile;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBuffer.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBuffer.aidl
new file mode 100644
index 0000000..8fabf03
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBuffer.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable StreamBuffer {
+  int streamId;
+  long bufferId;
+  android.hardware.common.NativeHandle buffer;
+  android.hardware.camera.device.BufferStatus status;
+  android.hardware.common.NativeHandle acquireFence;
+  android.hardware.common.NativeHandle releaseFence;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBufferRequestError.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBufferRequestError.aidl
new file mode 100644
index 0000000..f450149
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBufferRequestError.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum StreamBufferRequestError {
+  NO_BUFFER_AVAILABLE = 1,
+  MAX_BUFFER_EXCEEDED = 2,
+  STREAM_DISCONNECTED = 3,
+  UNKNOWN_ERROR = 4,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBufferRet.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBufferRet.aidl
new file mode 100644
index 0000000..3998cc3
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBufferRet.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable StreamBufferRet {
+  int streamId;
+  android.hardware.camera.device.StreamBuffersVal val;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBuffersVal.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBuffersVal.aidl
new file mode 100644
index 0000000..bebc9fc
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamBuffersVal.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+union StreamBuffersVal {
+  android.hardware.camera.device.StreamBufferRequestError error = android.hardware.camera.device.StreamBufferRequestError.UNKNOWN_ERROR;
+  android.hardware.camera.device.StreamBuffer[] buffers;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamConfiguration.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamConfiguration.aidl
new file mode 100644
index 0000000..f340578
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamConfiguration.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@VintfStability
+parcelable StreamConfiguration {
+  android.hardware.camera.device.Stream[] streams;
+  android.hardware.camera.device.StreamConfigurationMode operationMode;
+  android.hardware.camera.device.CameraMetadata sessionParams;
+  int streamConfigCounter;
+  boolean multiResolutionInputImage;
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamConfigurationMode.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamConfigurationMode.aidl
new file mode 100644
index 0000000..bdef412
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamConfigurationMode.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum StreamConfigurationMode {
+  NORMAL_MODE = 0,
+  CONSTRAINED_HIGH_SPEED_MODE = 1,
+  VENDOR_MODE_0 = 32768,
+  VENDOR_MODE_1 = 32769,
+  VENDOR_MODE_2 = 32770,
+  VENDOR_MODE_3 = 32771,
+  VENDOR_MODE_4 = 32772,
+  VENDOR_MODE_5 = 32773,
+  VENDOR_MODE_6 = 32774,
+  VENDOR_MODE_7 = 32775,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamRotation.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamRotation.aidl
new file mode 100644
index 0000000..2ef4274
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamRotation.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum StreamRotation {
+  ROTATION_0 = 0,
+  ROTATION_90 = 1,
+  ROTATION_180 = 2,
+  ROTATION_270 = 3,
+}
diff --git a/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamType.aidl b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamType.aidl
new file mode 100644
index 0000000..0f13fe8
--- /dev/null
+++ b/camera/device/aidl/aidl_api/android.hardware.camera.device/current/android/hardware/camera/device/StreamType.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.device;
+@Backing(type="int") @VintfStability
+enum StreamType {
+  OUTPUT = 0,
+  INPUT = 1,
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/BufferCache.aidl b/camera/device/aidl/android/hardware/camera/device/BufferCache.aidl
new file mode 100644
index 0000000..660250d
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/BufferCache.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * BufferCache:
+ *
+ * A bufferId associated with a certain stream.
+ * Buffers are passed between camera service and camera HAL via bufferId except
+ * the first time a new buffer is being passed to HAL in CaptureRequest. Camera
+ * service and camera HAL therefore need to maintain a cached map of bufferId
+ * and corresponing native handle.
+ *
+ */
+@VintfStability
+parcelable BufferCache {
+    /**
+     * The ID of the stream this list is associated with.
+     */
+
+    int streamId;
+    /**
+     * A cached buffer ID associated with streamId.
+     */
+    long bufferId;
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/device/aidl/android/hardware/camera/device/BufferRequest.aidl
similarity index 81%
rename from audio/7.1/IStreamIn.hal
rename to camera/device/aidl/android/hardware/camera/device/BufferRequest.aidl
index abebe6a..4a26db9 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/device/aidl/android/hardware/camera/device/BufferRequest.aidl
@@ -14,9 +14,11 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.device;
 
-import @7.0::IStreamIn;
+@VintfStability
+parcelable BufferRequest {
+    int streamId;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+    int numBuffersRequested;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/BufferRequestStatus.aidl b/camera/device/aidl/android/hardware/camera/device/BufferRequestStatus.aidl
new file mode 100644
index 0000000..0530173
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/BufferRequestStatus.aidl
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+@VintfStability
+@Backing(type="int")
+enum BufferRequestStatus {
+    /**
+     * Method call succeeded and all requested buffers are returned.
+     */
+    OK = 0,
+    /**
+     * Method call failed for some streams. Check per stream status for each
+     * returned StreamBufferRet.
+     */
+    FAILED_PARTIAL = 1,
+    /**
+     * Method call failed for all streams and no buffers are returned at all.
+     * Camera service is about to or is performing configureStreams. HAL must
+     * wait until next configureStreams call is finished before requesting
+     * buffers again.
+     */
+    FAILED_CONFIGURING = 2,
+    /**
+     * Method call failed for all streams and no buffers are returned at all.
+     * Failure due to bad BufferRequest input, eg: unknown streamId or repeated
+     * streamId.
+     */
+    FAILED_ILLEGAL_ARGUMENTS = 3,
+    /**
+     * Method call failed for all streams and no buffers are returned at all.
+     * Failure due to unknown reason, or all streams has individual failing
+     * reason. For the latter case, check per stream status for each returned
+     * StreamBufferRet.
+     */
+    FAILED_UNKNOWN = 4,
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/BufferStatus.aidl b/camera/device/aidl/android/hardware/camera/device/BufferStatus.aidl
new file mode 100644
index 0000000..9439e70
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/BufferStatus.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * BufferStatus:
+ *
+ * The current status of a single stream buffer.
+ */
+@VintfStability
+@Backing(type="int")
+enum BufferStatus {
+    /**
+     * The buffer is in a normal state, and can be used after waiting on its
+     * sync fence.
+     */
+    OK = 0,
+
+    /**
+     * The buffer does not contain valid data, and the data in it must not be
+     * used. The sync fence must still be waited on before reusing the buffer.
+     */
+    ERROR = 1,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/device/aidl/android/hardware/camera/device/CameraBlob.aidl
similarity index 76%
copy from audio/7.1/IStreamIn.hal
copy to camera/device/aidl/android/hardware/camera/device/CameraBlob.aidl
index abebe6a..085efa6 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/device/aidl/android/hardware/camera/device/CameraBlob.aidl
@@ -14,9 +14,13 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.device;
 
-import @7.0::IStreamIn;
+import android.hardware.camera.device.CameraBlobId;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+@VintfStability
+parcelable CameraBlob {
+    CameraBlobId blobId;
+
+    int blobSizeBytes;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/CameraBlobId.aidl b/camera/device/aidl/android/hardware/camera/device/CameraBlobId.aidl
new file mode 100644
index 0000000..8c303d9
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/CameraBlobId.aidl
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * CameraBlob:
+ *
+ * Transport header for camera blob types; generally compressed JPEG buffers in
+ * output streams.
+ *
+ * To capture JPEG images, a stream is created using the pixel format
+ * HAL_PIXEL_FORMAT_BLOB and dataspace HAL_DATASPACE_V0_JFIF. The buffer size
+ * for the stream is calculated by the framework, based on the static metadata
+ * field android.jpeg.maxSize. Since compressed JPEG images are of variable
+ * size, the HAL needs to include the final size of the compressed image using
+ * this structure inside the output stream buffer. The camera blob ID field must
+ * be set to CameraBlobId::JPEG.
+ *
+ * The transport header must be at the end of the JPEG output stream
+ * buffer. That means the jpegBlobId must start at byte[buffer_size -
+ * sizeof(CameraBlob)], where the buffer_size is the size of gralloc
+ * buffer. Any HAL using this transport header must account for it in
+ * android.jpeg.maxSize. The JPEG data itself starts at the beginning of the
+ * buffer and must be blobSize bytes long.
+ *
+ * It also supports transport of JPEG APP segments blob, which contains JPEG APP1 to
+ * APPn (Application Marker) segments as specified in JEITA CP-3451.
+ *
+ * To capture a JPEG APP segments blob, a stream is created using the pixel format
+ * HAL_PIXEL_FORMAT_BLOB and dataspace HAL_DATASPACE_JPEG_APP_SEGMENTS. The buffer
+ * size for the stream is calculated by the framework, based on the static
+ * metadata field android.heic.maxAppSegmentsCount, and is assigned to both
+ * Stream width and Stream bufferSize. Camera framework sets
+ * Stream height to 1.
+ *
+ * Similar to JPEG image, the JPEG APP segment images can be of variable size,
+ * so the HAL needs to include the final size of all APP segments using this
+ * structure inside the output stream buffer. The camera blob ID field must be
+ * set to CameraBlobId::JPEG_APP_SEGMENTS.
+ *
+ * The transport header must be at the end of the JPEG APP segments output stream
+ * buffer. That means the blobId must start at byte[buffer_size -
+ * sizeof(CameraBlob)], where the buffer_size is the size of gralloc
+ * buffer. The JPEG APP segments data itself starts at the beginning of the
+ * buffer and must be blobSize bytes long.
+ */
+@VintfStability
+@Backing(type="int")
+enum CameraBlobId {
+    JPEG = 0x00FF,
+
+    JPEG_APP_SEGMENTS = 0x100,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/device/aidl/android/hardware/camera/device/CameraMetadata.aidl
similarity index 65%
copy from audio/7.1/IStreamIn.hal
copy to camera/device/aidl/android/hardware/camera/device/CameraMetadata.aidl
index abebe6a..dd8bb54 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/device/aidl/android/hardware/camera/device/CameraMetadata.aidl
@@ -14,9 +14,16 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.device;
 
-import @7.0::IStreamIn;
-
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * Wrapper parcelable for CameraMetadata
+ */
+@VintfStability
+parcelable CameraMetadata {
+    /**
+     * A serialized metadata buffer created by libcamera_metadata.
+     * Access by casting to a camera_metadata* and using libcamera_metadata methods
+     */
+    byte[] metadata;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/CameraOfflineSessionInfo.aidl b/camera/device/aidl/android/hardware/camera/device/CameraOfflineSessionInfo.aidl
new file mode 100644
index 0000000..f635fe2
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/CameraOfflineSessionInfo.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.OfflineRequest;
+import android.hardware.camera.device.OfflineStream;
+
+/**
+ * CameraOfflineSessionInfo:
+ *
+ * Information about pending outputs that's being transferred to an offline
+ * session from an active session using the
+ * ICameraDeviceSession#switchToOffline method.
+ *
+ */
+@VintfStability
+parcelable CameraOfflineSessionInfo {
+    /**
+     * Information on what streams will be preserved in offline session.
+     * Streams not listed here will be removed by camera service after
+     * switchToOffline call returns.
+     */
+    OfflineStream[] offlineStreams;
+
+    /**
+     * Information for requests that will be handled by offline session
+     * Camera service will validate this matches what camera service has on
+     * record.
+     */
+    OfflineRequest[] offlineRequests;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/CaptureRequest.aidl b/camera/device/aidl/android/hardware/camera/device/CaptureRequest.aidl
new file mode 100644
index 0000000..1dad07a
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/CaptureRequest.aidl
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.CameraMetadata;
+import android.hardware.camera.device.PhysicalCameraSetting;
+import android.hardware.camera.device.StreamBuffer;
+
+/**
+ * CaptureRequest:
+ *
+ * A single request for image capture/buffer reprocessing, sent to the Camera
+ * HAL device by the framework in processCaptureRequest().
+ *
+ * The request contains the settings to be used for this capture, and the set of
+ * output buffers to write the resulting image data in. It may optionally
+ * contain an input buffer, in which case the request is for reprocessing that
+ * input buffer instead of capturing a new image with the camera sensor. The
+ * capture is identified by the frameNumber.
+ *
+ * In response, the camera HAL device must send a CaptureResult
+ * structure asynchronously to the framework, using the processCaptureResult()
+ * callback.
+ */
+@VintfStability
+parcelable CaptureRequest {
+    /**
+     * The frame number is an incrementing integer set by the framework to
+     * uniquely identify this capture. It needs to be returned in the result
+     * call, and is also used to identify the request in asynchronous
+     * notifications sent to ICameraDevice3Callback::notify().
+     */
+    int frameNumber;
+
+    /**
+     * If non-zero, read settings from request queue instead
+     * (see ICameraDeviceSession.getCaptureRequestMetadataQueue).
+     * If zero, read settings from .settings field.
+     */
+    long fmqSettingsSize;
+
+    /**
+     * If fmqSettingsSize is zero,
+     * the settings buffer contains the capture and processing parameters for
+     * the request. As a special case, an empty settings buffer indicates that
+     * the settings are identical to the most-recently submitted capture
+     * request. A empty buffer cannot be used as the first submitted request
+     * after a configureStreams() call.
+     *
+     * This field must be used if fmqSettingsSize is zero. It must not be used
+     * if fmqSettingsSize is non-zero.
+     */
+    CameraMetadata settings;
+
+    /**
+     * The input stream buffer to use for this request, if any.
+     *
+     * An invalid inputBuffer is signified by a null inputBuffer::buffer, in
+     * which case the value of all other members of inputBuffer must be ignored.
+     *
+     * If inputBuffer is invalid, then the request is for a new capture from the
+     * imager. If inputBuffer is valid, the request is for reprocessing the
+     * image contained in inputBuffer, and the HAL must release the inputBuffer
+     * back to the client in a subsequent processCaptureResult call.
+     *
+     * The HAL is required to wait on the acquire sync fence of the input buffer
+     * before accessing it.
+     *
+     */
+    StreamBuffer inputBuffer;
+    /**
+     * The width and height of the input buffer for this capture request.
+     *
+     * These fields will be [0, 0] if no input buffer exists in the capture
+     * request.
+     *
+     * If the stream configuration contains an input stream and has the
+     * multiResolutionInputImage flag set to true, the camera client may submit a
+     * reprocessing request with input buffer size different than the
+     * configured input stream size. In that case, the inputWith and inputHeight
+     * fields will be the actual size of the input image.
+     *
+     * If the stream configuration contains an input stream and the
+     * multiResolutionInputImage flag is false, the inputWidth and inputHeight must
+     * match the input stream size.
+     */
+    int inputWidth;
+
+    int inputHeight;
+
+    /**
+     * An array of at least 1 stream buffers, to be filled with image
+     * data from this capture/reprocess. The HAL must wait on the acquire fences
+     * of each stream buffer before writing to them.
+     *
+     * The HAL takes ownership of the handles in outputBuffers; the client
+     * must not access them until they are returned in a CaptureResult.
+     *
+     * Any or all of the buffers included here may be brand new in this
+     * request (having never before seen by the HAL).
+     */
+    StreamBuffer[] outputBuffers;
+
+    /**
+     * A vector containing individual camera settings for logical camera backed by multiple physical
+     * devices. In case the vector is empty, Hal should use the settings field. The
+     * individual settings should only be honored for physical devices that have respective Hal
+     * stream. Physical devices that have a corresponding Hal stream but don't have attached
+     * settings here should use the settings field.
+     * If any of the physical settings in the array are applied on one or more devices, then the
+     * visual effect on any Hal streams attached to the logical camera is undefined.
+     */
+    PhysicalCameraSetting[] physicalCameraSettings;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/CaptureResult.aidl b/camera/device/aidl/android/hardware/camera/device/CaptureResult.aidl
new file mode 100644
index 0000000..1522439
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/CaptureResult.aidl
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.CameraMetadata;
+import android.hardware.camera.device.PhysicalCameraMetadata;
+import android.hardware.camera.device.StreamBuffer;
+
+/**
+ * CaptureResult:
+ *
+ * The result of a single capture/reprocess by the camera HAL device. This is
+ * sent to the framework asynchronously with processCaptureResult(), in
+ * response to a single capture request sent to the HAL with
+ * processCaptureRequest(). Multiple processCaptureResult() calls may be
+ * performed by the HAL for each request.
+ *
+ * Each call, all with the same frame
+ * number, may contain some subset of the output buffers, and/or the result
+ * metadata.
+ *
+ * The result structure contains the output metadata from this capture, and the
+ * set of output buffers that have been/will be filled for this capture. Each
+ * output buffer may come with a release sync fence that the framework must wait
+ * on before reading, in case the buffer has not yet been filled by the HAL.
+ *
+ * The metadata may be provided multiple times for a single frame number. The
+ * framework must accumulate together the final result set by combining each
+ * partial result together into the total result set.
+ *
+ * If an input buffer is given in a request, the HAL must return it in one of
+ * the processCaptureResult calls, and the call may be to just return the
+ * input buffer, without metadata and output buffers; the sync fences must be
+ * handled the same way they are done for output buffers.
+ *
+ * Performance considerations:
+ *
+ * Applications receive these partial results immediately, so sending partial
+ * results is a highly recommended performance optimization to avoid the total
+ * pipeline latency before sending the results for what is known very early on
+ * in the pipeline.
+ *
+ * A typical use case might be calculating the AF state halfway through the
+ * pipeline; by sending the state back to the framework immediately, we get a
+ * 50% performance increase and perceived responsiveness of the auto-focus.
+ *
+ * Physical camera metadata needs to be generated if and only if a
+ * request is pending on a stream from that physical camera. For example,
+ * if the processCaptureRequest call doesn't request on physical camera
+ * streams, the physicalCameraMetadata field of the CaptureResult being returned
+ * should be an 0-size vector. If the processCaptureRequest call requests on
+ * streams from one of the physical camera, the physicalCameraMetadata field
+ * should contain one metadata describing the capture from that physical camera.
+ *
+ * For a CaptureResult that contains physical camera metadata, its
+ * partialResult field must be android.request.partialResultCount. In other
+ * words, the physicalCameraMetadata must only be contained in a final capture
+ * result.
+ */
+@VintfStability
+parcelable CaptureResult {
+    /**
+     * The frame number is an incrementing integer set by the framework in the
+     * submitted request to uniquely identify this capture. It is also used to
+     * identify the request in asynchronous notifications sent to
+     * ICameraDevice3Callback::notify().
+     */
+    int frameNumber;
+
+    /**
+     * If non-zero, read result from result queue instead
+     * (see ICameraDeviceSession.getCaptureResultMetadataQueue).
+     * If zero, read result from .result field.
+     */
+    long fmqResultSize;
+
+    /**
+     * The result metadata for this capture. This contains information about the
+     * final capture parameters, the state of the capture and post-processing
+     * hardware, the state of the 3A algorithms, if enabled, and the output of
+     * any enabled statistics units.
+     *
+     * If there was an error producing the result metadata, result must be an
+     * empty metadata buffer, and notify() must be called with
+     * ErrorCode::ERROR_RESULT.
+     *
+     * Multiple calls to processCaptureResult() with a given frameNumber
+     * may include (partial) result metadata.
+     *
+     * Partial metadata submitted must not include any metadata key returned
+     * in a previous partial result for a given frame. Each new partial result
+     * for that frame must also set a distinct partialResult value.
+     *
+     * If notify has been called with ErrorCode::ERROR_RESULT, all further
+     * partial results for that frame are ignored by the framework.
+     */
+    CameraMetadata result;
+
+    /**
+     * The completed output stream buffers for this capture.
+     *
+     * They may not yet be filled at the time the HAL calls
+     * processCaptureResult(); the framework must wait on the release sync
+     * fences provided by the HAL before reading the buffers.
+     *
+     * The StreamBuffer::buffer handle must be null for all returned buffers;
+     * the client must cache the handle and look it up via the combination of
+     * frame number and stream ID.
+     *
+     * The number of output buffers returned must be less than or equal to the
+     * matching capture request's count. If this is less than the buffer count
+     * in the capture request, at least one more call to processCaptureResult
+     * with the same frameNumber must be made, to return the remaining output
+     * buffers to the framework. This may only be zero if the structure includes
+     * valid result metadata or an input buffer is returned in this result.
+     *
+     * The HAL must set the stream buffer's release sync fence to a valid sync
+     * fd, or to null if the buffer has already been filled.
+     *
+     * If the HAL encounters an error while processing the buffer, and the
+     * buffer is not filled, the buffer's status field must be set to ERROR. If
+     * the HAL did not wait on the acquire fence before encountering the error,
+     * the acquire fence must be copied into the release fence, to allow the
+     * framework to wait on the fence before reusing the buffer.
+     *
+     * The acquire fence must be set to null for all output buffers.
+     *
+     * This vector may be empty; if so, at least one other processCaptureResult
+     * call must be made (or have been made) by the HAL to provide the filled
+     * output buffers.
+     *
+     * When processCaptureResult is called with a new buffer for a frame,
+     * all previous frames' buffers for that corresponding stream must have been
+     * already delivered (the fences need not have yet been signaled).
+     *
+     * Buffers for a frame may be sent to framework before the corresponding
+     * SHUTTER-notify call is made by the HAL.
+     *
+     * Performance considerations:
+     *
+     * Buffers delivered to the framework are not dispatched to the
+     * application layer until a start of exposure timestamp has been received
+     * via a SHUTTER notify() call. It is highly recommended to
+     * dispatch that call as early as possible.
+     */
+    StreamBuffer[] outputBuffers;
+
+    /**
+     * The handle for the input stream buffer for this capture, if any.
+     *
+     * It may not yet be consumed at the time the HAL calls
+     * processCaptureResult(); the framework must wait on the release sync fence
+     * provided by the HAL before reusing the buffer.
+     *
+     * The HAL must handle the sync fences the same way they are done for
+     * outputBuffers.
+     *
+     * Only one input buffer is allowed to be sent per request. Similarly to
+     * output buffers, the ordering of returned input buffers must be
+     * maintained by the HAL.
+     *
+     * Performance considerations:
+     *
+     * The input buffer should be returned as early as possible. If the HAL
+     * supports sync fences, it can call processCaptureResult to hand it back
+     * with sync fences being set appropriately. If the sync fences are not
+     * supported, the buffer can only be returned when it is consumed, which
+     * may take long time; the HAL may choose to copy this input buffer to make
+     * the buffer return sooner.
+     */
+    StreamBuffer inputBuffer;
+
+    /**
+     * In order to take advantage of partial results, the HAL must set the
+     * static metadata android.request.partialResultCount to the number of
+     * partial results it sends for each frame.
+     *
+     * Each new capture result with a partial result must set
+     * this field to a distinct inclusive value between
+     * 1 and android.request.partialResultCount.
+     *
+     * HALs not wishing to take advantage of this feature must not
+     * set an android.request.partialResultCount or partial_result to a value
+     * other than 1.
+     *
+     * This value must be set to 0 when a capture result contains buffers only
+     * and no metadata.
+     */
+    int partialResult;
+
+    /**
+     * The physical metadata for logical multi-camera.
+     */
+    PhysicalCameraMetadata[] physicalCameraMetadata;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ErrorCode.aidl b/camera/device/aidl/android/hardware/camera/device/ErrorCode.aidl
new file mode 100644
index 0000000..9a0f26c
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ErrorCode.aidl
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * Defined error codes for the NotifyMsg union in ICameraDeviceCallback.notify callbacks.
+ */
+@VintfStability
+@Backing(type="int")
+enum ErrorCode {
+    /**
+     * A serious failure occurred. No further frames or buffer streams must
+     * be produced by the device. Device must be treated as closed. The
+     * client must reopen the device to use it again. The frameNumber field
+     * is unused.
+     */
+    ERROR_DEVICE = 1,
+
+    /**
+     * An error has occurred in processing a request. No output (metadata or
+     * buffers) must be produced for this request. The frameNumber field
+     * specifies which request has been dropped. Subsequent requests are
+     * unaffected, and the device remains operational.
+     */
+    ERROR_REQUEST = 2,
+
+    /**
+     * An error has occurred in producing an output result metadata buffer
+     * for a request, but output stream buffers for it must still be
+     * available. Subsequent requests are unaffected, and the device remains
+     * operational. The frameNumber field specifies the request for which
+     * result metadata won't be available.
+     */
+    ERROR_RESULT = 3,
+
+    /**
+     * An error has occurred in placing an output buffer into a stream for a
+     * request. The frame metadata and other buffers may still be
+     * available. Subsequent requests are unaffected, and the device remains
+     * operational. The frameNumber field specifies the request for which the
+     * buffer was dropped, and errorStreamId indicates the stream
+     * that dropped the frame.
+     */
+    ERROR_BUFFER = 4,
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ErrorMsg.aidl b/camera/device/aidl/android/hardware/camera/device/ErrorMsg.aidl
new file mode 100644
index 0000000..56bc9f1
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ErrorMsg.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.ErrorCode;
+
+/**
+ * ErrorMsg:
+ *
+ * Message contents for MsgType::ERROR
+ */
+@VintfStability
+parcelable ErrorMsg {
+    /**
+     * Frame number of the request the error applies to. 0 if the frame number
+     * isn't applicable to the error.
+     */
+    int frameNumber;
+
+    /**
+     * Pointer to the stream that had a failure. -1 if the stream isn't
+     * applicable to the error.
+     */
+    int errorStreamId;
+
+    /**
+     * The code for this error.
+     */
+    ErrorCode errorCode;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/HalStream.aidl b/camera/device/aidl/android/hardware/camera/device/HalStream.aidl
new file mode 100644
index 0000000..b8ec3de
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/HalStream.aidl
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * HalStream:
+ *
+ * The camera HAL's response to each requested stream configuration.
+ *
+ * The HAL may specify the desired format, maximum buffers, usage flags, physical camera id for
+ * each stream.
+ *
+ */
+@VintfStability
+parcelable HalStream {
+    /**
+     * Stream ID - a nonnegative integer identifier for a stream.
+     *
+     * The ID must be one of the stream IDs passed into configureStreams.
+     */
+    int id;
+
+    /**
+     * An override pixel format for the buffers in this stream.
+     *
+     * The HAL must respect the requested format in Stream unless it is
+     * IMPLEMENTATION_DEFINED, in which case the override format here must be
+     * used by the client instead, for this stream. This allows cross-platform
+     * HALs to use a standard format since IMPLEMENTATION_DEFINED formats often
+     * require device-specific information. In all other cases, the
+     * overrideFormat must match the requested format.
+     *
+     * When HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, then the platform
+     * gralloc module must select a format based on the usage flags provided by
+     * the camera device and the other endpoint of the stream.
+     */
+    android.hardware.graphics.common.PixelFormat overrideFormat;
+
+    /**
+     * The bitfield gralloc usage flags for this stream, as needed by the HAL.
+     *
+     * For output streams, these are the HAL's producer usage flags. For input
+     * streams, these are the HAL's consumer usage flags. The usage flags from
+     * the producer and the consumer must be combined together and then passed
+     * to the platform graphics allocator HAL for allocating the gralloc buffers
+     * for each stream.
+     *
+     * If the stream's type is INPUT, then producerUsage must be 0, and
+     * consumerUsage must be set. For other types, producerUsage must be set,
+     * and consumerUsage must be 0.
+     */
+    android.hardware.graphics.common.BufferUsage producerUsage;
+
+    android.hardware.graphics.common.BufferUsage consumerUsage;
+
+    /**
+     * The maximum number of buffers the HAL device may need to have dequeued at
+     * the same time. The HAL device may not have more buffers in-flight from
+     * this stream than this value.
+     */
+    int maxBuffers;
+
+    /**
+     * A bitfield override dataSpace for the buffers in this stream.
+     *
+     * The HAL must respect the requested dataSpace in Stream unless it is
+     * IMPLEMENTATION_DEFINED, in which case the override dataSpace here must be
+     * used by the client instead, for this stream. This allows cross-platform
+     * HALs to use a specific dataSpace since IMPLEMENTATION_DEFINED formats often
+     * require device-specific information for correct selection. In all other cases, the
+     * overrideFormat must match the requested format.
+     */
+    android.hardware.graphics.common.Dataspace overrideDataSpace;
+
+    /**
+     * The physical camera id the current Hal stream belongs to.
+     *
+     * If current camera device isn't a logical camera, or the Hal stream isn't
+     * from a physical camera of the logical camera, this must be an empty
+     * string.
+     *
+     * A logical camera is a camera device backed by multiple physical camera
+     * devices.
+     *
+     * When not empty, this field is the <id> field of one of the full-qualified device
+     * instance names returned by getCameraIdList().
+     */
+    String physicalCameraId;
+
+    /**
+     * Whether this stream can be switch to offline mode.
+     *
+     * For devices that does not support the OFFLINE_PROCESSING capability, this
+     * fields will always be false.
+     *
+     * For backward compatible camera devices that support the
+     * OFFLINE_PROCESSING capability: any input stream and any output stream
+     * that can be output of the input stream must set this field to true. Also
+     * any stream of YUV420_888 format or JPEG format, with CPU_READ usage flag,
+     * must set this field to true.
+     *
+     * For depth only camera devices that support the OFFLINE_PROCESSING
+     * capability: any DEPTH16 output stream must set this field to true.
+     *
+     * All other streams are up to camera HAL to advertise support or not,
+     * though it is not recommended to list support for streams with
+     * hardware composer or video encoder usage flags as these streams tend
+     * to be targeted continuously and can lead to long latency when trying to
+     * switch to offline.
+     *
+     */
+    boolean supportOffline;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ICameraDevice.aidl b/camera/device/aidl/android/hardware/camera/device/ICameraDevice.aidl
new file mode 100644
index 0000000..f1f26d8
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ICameraDevice.aidl
@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.common.CameraResourceCost;
+import android.hardware.camera.device.CameraMetadata;
+import android.hardware.camera.device.ICameraDeviceCallback;
+import android.hardware.camera.device.ICameraDeviceSession;
+import android.hardware.camera.device.ICameraInjectionSession;
+import android.hardware.camera.device.StreamConfiguration;
+
+import android.os.ParcelFileDescriptor;
+
+/**
+ * Camera device interface
+ *
+ * Supports the android.hardware.Camera API, and the android.hardware.camera2
+ * API at LIMITED or better hardware level.
+ *
+ */
+@VintfStability
+interface ICameraDevice {
+    /**
+     * dumpState:
+     *
+     * Print out debugging state for the camera device. This may be called by
+     * the framework when the camera service is asked for a debug dump, which
+     * happens when using the dumpsys tool, or when capturing a bugreport.
+     *
+     * The passed-in file descriptor can be used to write debugging text using
+     * dprintf() or write().
+     *
+     * In case this camera device has been disconnected, the dump must not fail,
+     * but may simply print out 'Device disconnected' or equivalent.
+     *
+     * Performance requirements:
+     *
+     * This must be a non-blocking call. The HAL should return from this call
+     * in 1ms, must return from this call in 10ms. This call must avoid
+     * deadlocks, as it may be called at any point during camera operation.
+     * Any synchronization primitives used (such as mutex locks or semaphores)
+     * must be acquired with a timeout.
+     *
+     * @param fd The file descriptor to which the camera HAL must write any dumpState information.
+     */
+    void dumpState(in ParcelFileDescriptor fd);
+
+    /**
+     * getCameraCharacteristics:
+     *
+     * Return the static camera information for this camera device. This
+     * information may not change between consecutive calls.
+     *
+     * When an external camera is disconnected, its camera id becomes
+     * invalid. Calling this method with this invalid camera id must result in an
+     * ILLEGAL_ARGUMENT ServiceSpecificException on returning; this may happen even before the
+     * device status callback is invoked by the HAL.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         The camera device cannot be opened due to an internal
+     *         error.
+     *     CAMERA_DISCONNECTED:
+     *         An external camera device has been disconnected, and is no longer
+     *         available. This camera device interface is now stale, and a new
+     *         instance must be acquired if the device is reconnected. All
+     *         subsequent calls on this interface must return
+     *         CAMERA_DISCONNECTED.
+     *
+     * @return The static metadata for this camera device, or an empty metadata
+     *     structure if status is not OK.
+     *
+     */
+    CameraMetadata getCameraCharacteristics();
+
+    /**
+     * getPhysicalCameraCharacteristics:
+     *
+     * Return the static camera information for a physical camera ID backing
+     * this logical camera device. This information may not change between consecutive calls.
+     *
+     * The characteristics of all cameras returned by
+     * ICameraProvider::getCameraIdList() must be queried via
+     * getCameraCharacteristics(). Calling getPhysicalCameraCharacteristics() on
+     * those cameras must return ILLEGAL_ARGUMENT ServiceSpecificException.
+     *
+     * @param physicalCameraId The physical camera id parsed from the logical
+     *     camera's ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS static metadata
+     *     key. The framework assumes that this ID is just the <id> part of fully
+     *     qualified camera device name "device@<major>.<minor>/<type>/<id>". And
+     *     the physical camera must be of the same version and type as the parent
+     *     logical camera device.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         The camera device cannot be opened due to an internal
+     *         error.
+     *     CAMERA_DISCONNECTED:
+     *         An external camera device has been disconnected, and is no longer
+     *         available. This camera device interface is now stale, and a new
+     *         instance must be acquired if the device is reconnected. All
+     *         subsequent calls on this interface must return
+     *         CAMERA_DISCONNECTED.
+     *     ILLEGAL_ARGUMENT:
+     *         If the physicalCameraId is not a valid physical camera Id outside
+     *         of ICameraProvider::getCameraIdList().
+     *
+     * @return The static metadata for this logical camera device's physical device, or an empty
+     *     metadata structure if a service specific error is returned.
+     *
+     */
+    CameraMetadata getPhysicalCameraCharacteristics(in String physicalCameraId);
+
+    /**
+     * Get camera device resource cost information.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         An unexpected internal camera HAL error occurred, and the
+     *         resource cost is not available.
+     *     CAMERA_DISCONNECTED:
+     *         An external camera device has been disconnected, and is no longer
+     *         available. This camera device interface is now stale, and a new
+     *         instance must be acquired if the device is reconnected. All
+     *         subsequent calls on this interface must return
+     *         CAMERA_DISCONNECTED.
+     * @return resourceCost
+     *     The resources required to open this camera device, or unspecified
+     *     values if status is not OK.
+     */
+    CameraResourceCost getResourceCost();
+
+    /**
+     * isStreamCombinationSupported:
+     *
+     * Check for device support of specific camera stream combination.
+     *
+     * The streamList must contain at least one output-capable stream, and may
+     * not contain more than one input-capable stream.
+     * In contrast to regular stream configuration the framework does not create
+     * or initialize any actual streams. This means that Hal must not use or
+     * consider the stream "id" value.
+     *
+     * ------------------------------------------------------------------------
+     *
+     * Preconditions:
+     *
+     * The framework can call this method at any time before, during and
+     * after active session configuration. This means that calls must not
+     * impact the performance of pending camera requests in any way. In
+     * particular there must not be any glitches or delays during normal
+     * camera streaming.
+     *
+     * Performance requirements:
+     * This call is expected to be significantly faster than stream
+     * configuration. In general HW and SW camera settings must not be
+     * changed and there must not be a user-visible impact on camera performance.
+     *
+     *
+     * A service specific error will be returned on the following conditions
+     *
+     *     INTERNAL_ERROR:
+     *          The stream combination query cannot complete due to internal
+     *          error.
+     * @param streams The StreamConfiguration to be tested for support.
+     * @return true in case the stream combination is supported, false otherwise.
+     *
+     */
+    boolean isStreamCombinationSupported(in StreamConfiguration streams);
+
+    /**
+     * open:
+     *
+     * Power on and initialize this camera device for active use, returning a
+     * session handle for active operations.
+     *
+     * @param callback Interface to invoke by the HAL for device asynchronous
+     *     events.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         The camera device cannot be opened due to an internal
+     *         error.
+     *     ILLEGAL_ARGUMENT:
+     *         The callbacks handle is invalid (for example, it is null).
+     *     CAMERA_IN_USE:
+     *         This camera device is already open.
+     *     MAX_CAMERAS_IN_USE:
+     *         The maximal number of camera devices that can be
+     *         opened concurrently were opened already.
+     *     CAMERA_DISCONNECTED:
+     *         This external camera device has been disconnected, and is no
+     *         longer available. This interface is now stale, and a new instance
+     *         must be acquired if the device is reconnected. All subsequent
+     *         calls on this interface must return CAMERA_DISCONNECTED.
+     * @return The interface to the newly-opened camera session,
+     *     or null if status is not OK.
+     */
+    ICameraDeviceSession open(in ICameraDeviceCallback callback);
+
+    /**
+     * openInjection:
+     *
+     * Similar to open, except that this return an ICameraInjectionSession instead.
+     * Details about ICameraInjectionSession can be found in ICameraInjectionSession.aidl
+     *
+     * @param callback Interface to invoke by the HAL for device asynchronous
+     *     events.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         The camera device cannot be opened due to an internal
+     *         error.
+     *     ILLEGAL_ARGUMENT:
+     *         The callbacks handle is invalid (for example, it is null).
+     *     CAMERA_IN_USE:
+     *         This camera device is already open.
+     *     MAX_CAMERAS_IN_USE:
+     *         The maximal number of camera devices that can be
+     *         opened concurrently were opened already.
+     *     CAMERA_DISCONNECTED:
+     *         This external camera device has been disconnected, and is no
+     *         longer available. This interface is now stale, and a new instance
+     *         must be acquired if the device is reconnected. All subsequent
+     *         calls on this interface must return CAMERA_DISCONNECTED.
+     * @return The interface to the newly-opened camera session,
+     *     or null if status is not OK.
+     */
+    ICameraInjectionSession openInjectionSession(in ICameraDeviceCallback callback);
+
+    /**
+     * setTorchMode:
+     *
+     * Turn on or off the torch mode of the flash unit associated with this
+     * camera device. If the operation is successful, HAL must notify the
+     * framework torch state by invoking
+     * ICameraProviderCallback::torchModeStatusChange() with the new state.
+     *
+     * An active camera session has a higher priority accessing the flash
+     * unit. When there are any resource conflicts, such as when open() is
+     * called to fully activate a camera device, the provider must notify the
+     * framework through ICameraProviderCallback::torchModeStatusChange() that
+     * the torch mode has been turned off and the torch mode state has become
+     * TORCH_MODE_STATUS_NOT_AVAILABLE. When resources to turn on torch mode
+     * become available again, the provider must notify the framework through
+     * ICameraProviderCallback::torchModeStatusChange() that the torch mode
+     * state has become TORCH_MODE_STATUS_AVAILABLE_OFF for set_torch_mode() to
+     * be called.
+     *
+     * When the client calls setTorchMode() to turn on the torch mode of a flash
+     * unit, if the HAL cannot keep multiple torch modes on simultaneously, the
+     * HAL must turn off the torch mode(s) that were turned on by previous
+     * setTorchMode() calls and notify the framework that the torch mode state
+     * of those flash unit(s) has become TORCH_MODE_STATUS_AVAILABLE_OFF.
+     *
+     * @param on Whether to turn the turn mode ON - specified by true or OFF, specified by false
+     *
+     * A service specific error will be returned on the following conditions
+     *
+     *     INTERNAL_ERROR:
+     *         The flash unit cannot be operated due to an unexpected internal
+     *         error.
+     *     ILLEGAL_ARGUMENT:
+     *         The camera ID is unknown.
+     *     CAMERA_IN_USE:
+     *         This camera device has been opened, so the torch cannot be
+     *         controlled until it is closed.
+     *     MAX_CAMERAS_IN_USE:
+     *         Due to other camera devices being open, or due to other
+     *         resource constraints, the torch cannot be controlled currently.
+     *     OPERATION_NOT_SUPPORTED:
+     *         This camera device does not have a flash unit. This can
+     *         be returned if and only if android.flash.info.available is
+     *         false.
+     *     CAMERA_DISCONNECTED:
+     *         An external camera device has been disconnected, and is no longer
+     *         available. This camera device interface is now stale, and a new
+     *         instance must be acquired if the device is reconnected. All
+     *         subsequent calls on this interface must return
+     *         CAMERA_DISCONNECTED.
+     *
+     */
+    void setTorchMode(boolean on);
+
+    /**
+     * turnOnTorchWithStrengthLevel:
+     *
+     * Change the brightness level of the flash unit associated with this camera device
+     * and set it to value in torchStrength. This function also turns ON the torch
+     * with specified torchStrength if the torch is OFF.
+     *
+     * The torchStrength value must be within the valid range i.e. >=1 and
+     * <= FLASH_INFO_STRENGTH_MAXIMUM_LEVEL. Whenever the torch is turned OFF,
+     * the brightness level will reset to FLASH_INFO_STRENGTH_DEFAULT_LEVEL.
+     * When the client calls setTorchMode(ON) after turnOnTorchWithStrengthLevel(N),
+     * the flash unit will have brightness level equal to N. This level does not
+     * represent the real brightness units. It is linear in nature i.e. flashlight
+     * at level 10 is twice as bright as at level 5.
+     *
+     * @param torchStrength Brightness level to be set for the flashlight.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         The flash unit cannot be operated due to an unexpected internal
+     *         error.
+     *     CAMERA_IN_USE:
+     *         This status code is returned when:
+     *           - This camera device has been opened, so the torch cannot be
+     *             controlled until it is closed.
+     *           - Due to other camera devices being open, or due to other
+     *             resource constraints, the torch cannot be controlled currently.
+     *     ILLEGAL_ARGUMENT:
+     *         If the torchStrength value is not within the range i.e. < 1 or
+     *         > FLASH_INFO_STRENGTH_MAXIMUM_LEVEL.
+     *     OPERATION_NOT_SUPPORTED:
+     *         This status code is returned when:
+     *           - This camera device does not support direct operation of flashlight
+     *             torch mode. The framework must open the camera device and turn
+     *             the torch on through the device interface.
+     *           - This camera device does not have a flash unit.
+     *           - This camera device has flash unit but does not support torch
+     *             strength control.
+     *     CAMERA_DISCONNECTED:
+     *         An external camera device has been disconnected, and is no longer
+     *         available. This camera device interface is now stale, and a new
+     *         instance must be acquired if the device is reconnected. All
+     *         subsequent calls on this interface must return
+     *         CAMERA_DISCONNECTED.
+     *
+     */
+    void turnOnTorchWithStrengthLevel(int torchStrength);
+
+    /**
+     * getTorchStrengthLevel:
+     *
+     * Get current torch strength level.
+     * If the device supports torch strength control, when the torch is OFF the
+     * strength level will reset to default level, so the return
+     * value in this case will be equal to FLASH_INFO_STRENGTH_DEFAULT_LEVEL.
+     *
+     * A service specific error will be returned on the following conditions
+     *      INTERNAL_ERROR:
+     *           An unexpected error occurred and the information is not
+     *           available.
+     *      OPERATION_NOT_SUPPORTED:
+     *          This status code is returned when:
+     *            - This camera device does not support direct operation of flashlight
+     *              torch mode. The framework must open the camera device and turn
+     *              the torch on through the device interface.
+     *            - This camera device does not have a flash unit.
+     *            - This camera device has flash unit but does not support torch
+     *              strength control.
+     *
+     * @return torchStrength Current torch strength level.
+     *
+     */
+    int getTorchStrengthLevel();
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ICameraDeviceCallback.aidl b/camera/device/aidl/android/hardware/camera/device/ICameraDeviceCallback.aidl
new file mode 100644
index 0000000..83ff823
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ICameraDeviceCallback.aidl
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.BufferRequest;
+import android.hardware.camera.device.BufferRequestStatus;
+import android.hardware.camera.device.CaptureResult;
+import android.hardware.camera.device.NotifyMsg;
+import android.hardware.camera.device.StreamBuffer;
+import android.hardware.camera.device.StreamBufferRet;
+
+/**
+ * Callback methods for the HAL to call into the framework.
+ */
+@VintfStability
+interface ICameraDeviceCallback {
+    /**
+     * notify:
+     *
+     * Asynchronous notification callback from the HAL, fired for various
+     * reasons. Only for information independent of frame capture, or that
+     * require specific timing. Multiple messages may be sent in one call; a
+     * message with a higher index must be considered to have occurred after a
+     * message with a lower index.
+     *
+     * Multiple threads may call notify() simultaneously.
+     *
+     * Buffers delivered to the framework must not be dispatched to the
+     * application layer until a start of exposure timestamp (or input image's
+     * start of exposure timestamp for a reprocess request) has been received
+     * via a SHUTTER notify() call. It is highly recommended to dispatch this
+     * call as early as possible.
+     *
+     * The SHUTTER notify calls for requests with android.control.enableZsl
+     * set to TRUE and ANDROID_CONTROL_CAPTURE_INTENT == STILL_CAPTURE may be
+     * out-of-order compared to SHUTTER notify for other kinds of requests
+     * (including regular, reprocess, or zero-shutter-lag requests with
+     * different capture intents).
+     *
+     * As a result, the capture results of zero-shutter-lag requests with
+     * ANDROID_CONTROL_CAPTURE_INTENT == STILL_CAPTURE may be out-of-order
+     * compared to capture results for other kinds of requests.
+     *
+     * Different SHUTTER notify calls for zero-shutter-lag requests with
+     * ANDROID_CONTROL_CAPTURE_INTENT == STILL_CAPTURE must be in order between
+     * them, as is for other kinds of requests. SHUTTER notify calls for
+     * zero-shutter-lag requests with non STILL_CAPTURE intent must be in order
+     * with SHUTTER notify calls for regular requests.
+     * ------------------------------------------------------------------------
+     * Performance requirements:
+     *
+     * This is a non-blocking call. The framework must handle each message in 5ms.
+     * @param msgs List of notification msgs to be processed by camera framework
+     */
+    void notify(in NotifyMsg[] msgs);
+
+    /**
+     * processCaptureResult:
+     *
+     * Send results from one or more completed or partially completed captures
+     * to the framework.
+     * processCaptureResult() may be invoked multiple times by the HAL in
+     * response to a single capture request. This allows, for example, the
+     * metadata and low-resolution buffers to be returned in one call, and
+     * post-processed JPEG buffers in a later call, once it is available. Each
+     * call must include the frame number of the request it is returning
+     * metadata or buffers for. Only one call to processCaptureResult
+     * may be made at a time by the HAL although the calls may come from
+     * different threads in the HAL.
+     *
+     * A component (buffer or metadata) of the complete result may only be
+     * included in one process_capture_result call. A buffer for each stream,
+     * and the result metadata, must be returned by the HAL for each request in
+     * one of the processCaptureResult calls, even in case of errors producing
+     * some of the output. A call to processCaptureResult() with neither
+     * output buffers or result metadata is not allowed.
+     *
+     * The order of returning metadata and buffers for a single result does not
+     * matter, but buffers for a given stream must be returned in FIFO order. So
+     * the buffer for request 5 for stream A must always be returned before the
+     * buffer for request 6 for stream A. This also applies to the result
+     * metadata; the metadata for request 5 must be returned before the metadata
+     * for request 6.
+     *
+     * However, different streams are independent of each other, so it is
+     * acceptable and expected that the buffer for request 5 for stream A may be
+     * returned after the buffer for request 6 for stream B is. And it is
+     * acceptable that the result metadata for request 6 for stream B is
+     * returned before the buffer for request 5 for stream A is. If multiple
+     * capture results are included in a single call, camera framework must
+     * process results sequentially from lower index to higher index, as if
+     * these results were sent to camera framework one by one, from lower index
+     * to higher index.
+     *
+     * The HAL retains ownership of result structure, which only needs to be
+     * valid to access during this call.
+     *
+     * The output buffers do not need to be filled yet; the framework must wait
+     * on the stream buffer release sync fence before reading the buffer
+     * data. Therefore, this method should be called by the HAL as soon as
+     * possible, even if some or all of the output buffers are still in
+     * being filled. The HAL must include valid release sync fences into each
+     * output_buffers stream buffer entry, or -1 if that stream buffer is
+     * already filled.
+     *
+     * If the result buffer cannot be constructed for a request, the HAL must
+     * return an empty metadata buffer, but still provide the output buffers and
+     * their sync fences. In addition, notify() must be called with an
+     * ERROR_RESULT message.
+     *
+     * If an output buffer cannot be filled, its status field must be set to
+     * STATUS_ERROR. In this case, notify() isn't required to be called with
+     * an ERROR_BUFFER message. The framework will simply treat the notify()
+     * call with ERROR_BUFFER as a no-op, and derive whether and when to notify
+     * the application of buffer loss based on the buffer status and whether or not
+     * the entire capture has failed.
+     *
+     * If the entire capture has failed, then this method still needs to be
+     * called to return the output buffers to the framework. All the buffer
+     * statuses must be STATUS_ERROR, and the result metadata must be an
+     * empty buffer. In addition, notify() must be called with a ERROR_REQUEST
+     * message. In this case, individual ERROR_RESULT/ERROR_BUFFER messages
+     * must not be sent. Note that valid partial results are still allowed
+     * as long as the final result metadata fails to be generated.
+     *
+     * Performance requirements:
+     *
+     * This is a non-blocking call. The framework must handle each CaptureResult
+     * within 5ms.
+     *
+     * The pipeline latency (see ICameraDeviceSession for definition) should be less than or equal
+     * to 4 frame intervals, and must be less than or equal to 8 frame intervals.
+     *
+     * @param results to be processed by the camera framework
+     *
+     */
+    void processCaptureResult(in CaptureResult[] results);
+
+    /**
+     * requestStreamBuffers:
+     *
+     * Synchronous callback for HAL to ask for output buffers from camera service.
+     *
+     * This call may be serialized in camera service so it is strongly
+     * recommended to only call this method from one thread.
+     *
+     * When camera device advertises
+     * InfoSupportedBufferManagementVersion ==
+     * ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION_HIDL_DEVICE_3_5), HAL
+     * can use this method to request buffers from camera service.
+     *
+     * A BufferRequestStatus will be returned
+     *     OK: All the requests succeeded
+     *     FAILED_PARTIAL: some streams failed while some succeeds. Check
+     *             individual StreamBufferRet for details.
+     *     FAILED_CONFIGURING: the request failed because camera servicve is
+     *             performing configureStreams and no buffers are returned.
+     *     FAILED_UNKNOWN: the request failed for unknown reason and no buffers
+     *             are returned.
+     * A service specific exception will be returned in the following case:
+     *
+     * ILLEGAL_ARGUMENT: If the buffer requests through bufReqs are not legal, do not correspond
+     *                   to a configured stream.
+     *
+     * Performance requirements:
+     * This is a blocking call that takes more time with more buffers requested.
+     * HAL must not request large amount of buffers on a latency critical code
+     * path. It is highly recommended to use a dedicated thread to perform
+     * all requestStreamBuffers calls, and adjust the thread priority and/or
+     * timing of making the call in order for buffers to arrive before HAL is
+     * ready to fill the buffer.
+     * @param bufReqs Buffers requested by the camera HAL
+     * @param buffers the buffers returned to the camera HAL by the camera framework
+     */
+    BufferRequestStatus requestStreamBuffers(
+            in BufferRequest[] bufReqs, out StreamBufferRet[] buffers);
+
+    /**
+     * returnStreamBuffers:
+     *
+     * Synchronous callback for HAL to return output buffers to camera service.
+     *
+     * If this method is called during a configureStreams call, it must be blocked
+     * until camera service finishes the ongoing configureStreams call.
+     * @param buffers The stream buffers returned to the camera framework
+     */
+    void returnStreamBuffers(in StreamBuffer[] buffers);
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ICameraDeviceSession.aidl b/camera/device/aidl/android/hardware/camera/device/ICameraDeviceSession.aidl
new file mode 100644
index 0000000..885c71a
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ICameraDeviceSession.aidl
@@ -0,0 +1,579 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.BufferCache;
+import android.hardware.camera.device.CameraMetadata;
+import android.hardware.camera.device.CameraOfflineSessionInfo;
+import android.hardware.camera.device.CaptureRequest;
+import android.hardware.camera.device.HalStream;
+import android.hardware.camera.device.ICameraOfflineSession;
+import android.hardware.camera.device.RequestTemplate;
+import android.hardware.camera.device.StreamConfiguration;
+import android.hardware.common.fmq.MQDescriptor;
+import android.hardware.common.fmq.SynchronizedReadWrite;
+
+/**
+ * Camera device active session interface.
+ *
+ * Obtained via ICameraDevice::open(), this interface contains the methods to
+ * configure and request captures from an active camera device.
+ */
+@VintfStability
+interface ICameraDeviceSession {
+    /**
+     * close:
+     *
+     * Shut down the camera device.
+     *
+     * After this call, all calls to this session instance must set a
+     * INTERNAL_ERROR ServiceSpecificException.
+     *
+     * This method must always succeed, even if the device has encountered a
+     * serious error.
+     */
+    void close();
+
+    /**
+     *
+     * configureStreams:
+     *
+     * Reset the HAL camera device processing pipeline and set up new input and
+     * output streams. This call replaces any existing stream configuration with
+     * the streams defined in the streamList. This method must be called at
+     * least once before a request is submitted with processCaptureRequest().
+     *
+     * The streamList must contain at least one output-capable stream, and may
+     * not contain more than one input-capable stream.
+     *
+     * The streamList may contain streams that are also in the currently-active
+     * set of streams (from the previous call to configureStreams()). These
+     * streams must already have valid values for usage, maxBuffers, and the
+     * private pointer.
+     *
+     * If the HAL needs to change the stream configuration for an existing
+     * stream due to the new configuration, it may rewrite the values of usage
+     * and/or maxBuffers during the configure call.
+     *
+     * The framework must detect such a change, and may then reallocate the
+     * stream buffers before using buffers from that stream in a request.
+     *
+     * If a currently-active stream is not included in streamList, the HAL may
+     * safely remove any references to that stream. It must not be reused in a
+     * later configureStreams() call by the framework, and all the gralloc
+     * buffers for it must be freed after the configureStreams() call returns.
+     *
+     * If the stream is new, the client must set the consumer usage flags in
+     * requestedConfiguration. Upon return, the HAL device must set producerUsage,
+     * maxBuffers, and other fields in the configureStreams() return values. These
+     * fields are then used by the framework and the platform gralloc module to
+     * allocate the gralloc buffers for each stream.
+     *
+     * Newly allocated buffers may be included in a capture request at any time
+     * by the framework. Once a gralloc buffer is returned to the framework
+     * with processCaptureResult (and its respective releaseFence has been
+     * signaled) the framework may free or reuse it at any time.
+     *
+     * ------------------------------------------------------------------------
+     *
+     * Preconditions:
+     *
+     * The framework must only call this method when no captures are being
+     * processed. That is, all results have been returned to the framework, and
+     * all in-flight input and output buffers have been returned and their
+     * release sync fences have been signaled by the HAL. The framework must not
+     * submit new requests for capture while the configureStreams() call is
+     * underway.
+     *
+     * Postconditions:
+     *
+     * The HAL device must configure itself to provide maximum possible output
+     * frame rate given the sizes and formats of the output streams, as
+     * documented in the camera device's static metadata.
+     *
+     * Performance requirements:
+     *
+     * This call is expected to be heavyweight and possibly take several hundred
+     * milliseconds to complete, since it may require resetting and
+     * reconfiguring the image sensor and the camera processing pipeline.
+     * Nevertheless, the HAL device should attempt to minimize the
+     * reconfiguration delay to minimize the user-visible pauses during
+     * application operational mode changes (such as switching from still
+     * capture to video recording).
+     *
+     * The HAL should return from this call in 500ms, and must return from this
+     * call in 1000ms.
+     *
+     * A service specific error will be returned on the following conditions
+     *
+     *     INTERNAL_ERROR:
+     *         If there has been a fatal error and the device is no longer
+     *         operational. Only close() can be called successfully by the
+     *         framework after this error is returned.
+     *     ILLEGAL_ARGUMENT:
+     *         If the requested stream configuration is invalid. Some examples
+     *         of invalid stream configurations include:
+     *           - Including more than 1 INPUT stream
+     *           - Not including any OUTPUT streams
+     *           - Including streams with unsupported formats, or an unsupported
+     *             size for that format.
+     *           - Including too many output streams of a certain format.
+     *           - Unsupported rotation configuration
+     *           - Stream sizes/formats don't satisfy the
+     *             StreamConfigurationMode requirements for non-NORMAL mode, or
+     *             the requested operation_mode is not supported by the HAL.
+     *           - Unsupported usage flag
+     *         The camera service cannot filter out all possible illegal stream
+     *         configurations, since some devices may support more simultaneous
+     *         streams or larger stream resolutions than the minimum required
+     *         for a given camera device hardware level. The HAL must return an
+     *         ILLEGAL_ARGUMENT for any unsupported stream set, and then be
+     *         ready to accept a future valid stream configuration in a later
+     *         configureStreams call.
+     * @param requestedConfiguration The stream configuration requested by the camera framework to
+     *        be configured by the camera HAL.
+     * @return A list of the stream parameters desired by the HAL for
+     *     each stream, including maximum buffers, the usage flags, and the
+     *     override format.
+     *
+     */
+    HalStream[] configureStreams(in StreamConfiguration requestedConfiguration);
+
+    /**
+     * constructDefaultRequestSettings:
+     *
+     * Create capture settings for standard camera use cases.
+     *
+     * The device must return a settings buffer that is configured to meet the
+     * requested use case, which must be one of the RequestTemplate enums.
+     * All request control fields must be included.
+     *
+     * Performance requirements:
+     *
+     * This must be a non-blocking call. The HAL should return from this call
+     * in 1ms, and must return from this call in 5ms.
+     *
+     * A service specific error will be returned on the following conditions
+     * Return values:
+     *
+     *     INTERNAL_ERROR:
+     *         An unexpected internal error occurred, and the default settings
+     *         are not available.
+     *     ILLEGAL_ARGUMENT:
+     *         The camera HAL does not support the input template type
+     *     CAMERA_DISCONNECTED:
+     *         An external camera device has been disconnected, and is no longer
+     *         available. This camera device interface is now stale, and a new
+     *         instance must be acquired if the device is reconnected. All
+     *         subsequent calls on this interface must return
+     *         CAMERA_DISCONNECTED.
+     * @param type The requested template CaptureRequest type to create the default settings for.
+     *
+     * @return capture settings for the requested use case.
+     *
+     */
+
+    CameraMetadata constructDefaultRequestSettings(in RequestTemplate type);
+
+    /**
+     * flush:
+     *
+     * Flush all currently in-process captures and all buffers in the pipeline
+     * on the given device. Generally, this method is used to dump all state as
+     * quickly as possible in order to prepare for a configure_streams() call.
+     *
+     * No buffers are required to be successfully returned, so every buffer
+     * held at the time of flush() (whether successfully filled or not) may be
+     * returned with BufferStatus.ERROR. Note the HAL is still allowed
+     * to return valid (BufferStatus.OK) buffers during this call,
+     * provided they are successfully filled.
+     *
+     * All requests currently in the HAL are expected to be returned as soon as
+     * possible. Not-in-process requests must return errors immediately. Any
+     * interruptible hardware blocks must be stopped, and any uninterruptible
+     * blocks must be waited on.
+     *
+     * flush() may be called concurrently to processCaptureRequest(), with the
+     * expectation that processCaptureRequest returns quickly and the
+     * request submitted in that processCaptureRequest call is treated like
+     * all other in-flight requests. Due to concurrency issues, it is possible
+     * that from the HAL's point of view, a processCaptureRequest() call may
+     * be started after flush has been invoked but has not returned yet. If such
+     * a call happens before flush() returns, the HAL must treat the new
+     * capture request like other in-flight pending requests (see #4 below).
+     *
+     * More specifically, the HAL must follow below requirements for various
+     * cases:
+     *
+     * 1. For captures that are too late for the HAL to cancel/stop, and must be
+     *    completed normally by the HAL; i.e. the HAL can send shutter/notify
+     *    and processCaptureResult and buffers as normal.
+     *
+     * 2. For pending requests that have not done any processing, the HAL must
+     *    call notify with ErrorMsg set, and return all the output
+     *    buffers with processCaptureResult in the error state
+     *    (BufferStatus.ERROR). The HAL must not place the release
+     *    fence into an error state, instead, the release fences must be set to
+     *    the acquire fences passed by the framework, or -1 if they have been
+     *    waited on by the HAL already. This is also the path to follow for any
+     *    captures for which the HAL already called notify() with
+     *    ShutterMsg set, but won't be producing any metadata/valid buffers
+     *    for. After ErrorMsg is set, for a given frame, only
+     *    processCaptureResults with buffers in BufferStatus.ERROR
+     *    are allowed. No further notifys or processCaptureResult with
+     *    non-empty metadata is allowed.
+     *
+     * 3. For partially completed pending requests that do not have all the
+     *    output buffers or perhaps missing metadata, the HAL must follow
+     *    below:
+     *
+     *    3.1. Call notify with ErrorMsg set with ErrorCode.ERROR_RESULT if some of the expected
+     *         result metadata (i.e. one or more partial metadata) won't be
+     *         available for the capture.
+     *
+     *    3.2. Call notify with ErrorMsg set with ErrorCode.ERROR_BUFFER for every buffer that
+     *         won't be produced for the capture.
+     *
+     *    3.3. Call notify with ShutterMsg with the capture timestamp
+     *         before any buffers/metadata are returned with
+     *         processCaptureResult.
+     *
+     *    3.4. For captures that will produce some results, the HAL must not
+     *         call notify with ErrorCode.ERROR_REQUEST, since that indicates complete
+     *         failure.
+     *
+     *    3.5. Valid buffers/metadata must be passed to the framework as
+     *         normal.
+     *
+     *    3.6. Failed buffers must be returned to the framework as described
+     *         for case 2. But failed buffers do not have to follow the strict
+     *         ordering valid buffers do, and may be out-of-order with respect
+     *         to valid buffers. For example, if buffers A, B, C, D, E are sent,
+     *         D and E are failed, then A, E, B, D, C is an acceptable return
+     *         order.
+     *
+     *    3.7. For fully-missing metadata, calling ErrorCode.ERROR_RESULT is
+     *         sufficient, no need to call processCaptureResult with empty
+     *         metadata or equivalent.
+     *
+     * 4. If a flush() is invoked while a processCaptureRequest() invocation
+     *    is active, that process call must return as soon as possible. In
+     *    addition, if a processCaptureRequest() call is made after flush()
+     *    has been invoked but before flush() has returned, the capture request
+     *    provided by the late processCaptureRequest call must be treated
+     *    like a pending request in case #2 above.
+     *
+     * flush() must only return when there are no more outstanding buffers or
+     * requests left in the HAL. The framework may call configure_streams (as
+     * the HAL state is now quiesced) or may issue new requests.
+     *
+     * Note that it's sufficient to only support fully-succeeded and
+     * fully-failed result cases. However, it is highly desirable to support
+     * the partial failure cases as well, as it could help improve the flush
+     * call overall performance.
+     *
+     * Performance requirements:
+     *
+     * The HAL should return from this call in 100ms, and must return from this
+     * call in 1000ms. And this call must not be blocked longer than pipeline
+     * latency (see below for definition).
+     *
+     * Pipeline Latency:
+     * For a given capture request, the duration from the framework calling
+     * process_capture_request to the HAL sending capture result and all buffers
+     * back by process_capture_result call. To make the Pipeline Latency measure
+     * independent of frame rate, it is measured by frame count.
+     *
+     * For example, when frame rate is 30 (fps), the frame duration (time interval
+     * between adjacent frame capture time) is 33 (ms).
+     * If it takes 5 frames for framework to get the result and buffers back for
+     * a given request, then the Pipeline Latency is 5 (frames), instead of
+     * 5 x 33 = 165 (ms).
+     *
+     * The Pipeline Latency is determined by android.request.pipelineDepth and
+     * android.request.pipelineMaxDepth, see their definitions for more details.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         If the camera device has encountered a serious error. After this
+     *         error is returned, only the close() method can be successfully
+     *         called by the framework.
+     */
+    void flush();
+
+    /**
+     * getCaptureRequestMetadataQueue:
+     *
+     * Retrieves the queue used along with processCaptureRequest. If
+     * client decides to use fast message queue to pass request metadata,
+     * it must:
+     * - Call getCaptureRequestMetadataQueue to retrieve the fast message queue;
+     * - In each of the requests sent in processCaptureRequest, set
+     *   fmqSettingsSize field of CaptureRequest to be the size to read from the
+     *   fast message queue; leave settings field of CaptureRequest empty.
+     *
+     * @return the queue that client writes request metadata to.
+     */
+    MQDescriptor<byte, SynchronizedReadWrite> getCaptureRequestMetadataQueue();
+
+    /**
+     * getCaptureResultMetadataQueue:
+     *
+     * Retrieves the queue used along with
+     * ICameraDeviceCallback.processCaptureResult.
+     *
+     * Clients to ICameraDeviceSession must:
+     * - Call getCaptureRequestMetadataQueue to retrieve the fast message queue;
+     * - In implementation of ICameraDeviceCallback, test whether
+     *   .fmqResultSize field is zero.
+     *     - If .fmqResultSize != 0, read result metadata from the fast message
+     *       queue;
+     *     - otherwise, read result metadata in CaptureResult.result.
+     *
+     * @return the queue that implementation writes result metadata to.
+     */
+    MQDescriptor<byte, SynchronizedReadWrite> getCaptureResultMetadataQueue();
+
+    /**
+     * isReconfigurationRequired:
+     *
+     * Check whether complete stream reconfiguration is required for possible new session
+     * parameter values.
+     *
+     * This method must be called by the camera framework in case the client changes
+     * the value of any advertised session parameters. Depending on the specific values
+     * the HAL can decide whether a complete stream reconfiguration is required. In case
+     * the HAL returns false, the camera framework must skip the internal reconfiguration.
+     * In case Hal returns true, the framework must reconfigure the streams and pass the
+     * new session parameter values accordingly.
+     * This call may be done by the framework some time before the request with new parameters
+     * is submitted to the HAL, and the request may be cancelled before it ever gets submitted.
+     * Therefore, the HAL must not use this query as an indication to change its behavior in any
+     * way.
+     * ------------------------------------------------------------------------
+     *
+     * Preconditions:
+     *
+     * The framework can call this method at any time after active
+     * session configuration. There must be no impact on the performance of
+     * pending camera requests in any way. In particular there must not be
+     * any glitches or delays during normal camera streaming.
+     *
+     * Performance requirements:
+     * HW and SW camera settings must not be changed and there must not be
+     * a user-visible impact on camera performance.
+     *
+     * @param oldSessionParams Before session parameters, usually the current session parameters.
+     * @param newSessionParams The new session parameters which may be set by client.
+     * A service specific error will be returned in the following case:
+     *
+     *     INTERNAL_ERROR:
+     *          The reconfiguration query cannot complete due to internal
+     *          error.
+     * @return true in case the stream reconfiguration is required, false otherwise.
+     */
+    boolean isReconfigurationRequired(in CameraMetadata oldSessionParams,
+                                      in CameraMetadata newSessionParams);
+
+    /**
+     * processCaptureRequest:
+     *
+     * Send a list of capture requests to the HAL. The HAL must not return from
+     * this call until it is ready to accept the next set of requests to
+     * process. Only one call to processCaptureRequest() must be made at a time
+     * by the framework, and the calls must all be from the same thread. The
+     * next call to processCaptureRequest() must be made as soon as a new
+     * request and its associated buffers are available. In a normal preview
+     * scenario, this means the function is generally called again by the
+     * framework almost instantly. If more than one request is provided by the
+     * client, the HAL must process the requests in order of lowest index to
+     * highest index.
+     *
+     * The cachesToRemove argument contains a list of buffer caches (see
+     * StreamBuffer document for more information on buffer cache) to be removed
+     * by camera HAL. Camera HAL must remove these cache entries whether or not
+     * this method returns OK.
+     *
+     * The actual request processing is asynchronous, with the results of
+     * capture being returned by the HAL through the processCaptureResult()
+     * call. This call requires the result metadata to be available, but output
+     * buffers may simply provide sync fences to wait on. Multiple requests are
+     * expected to be in flight at once, to maintain full output frame rate.
+     *
+     * The framework retains ownership of the request structure. It is only
+     * guaranteed to be valid during this call. The HAL device must make copies
+     * of the information it needs to retain for the capture processing. The HAL
+     * is responsible for waiting on and closing the buffers' fences and
+     * returning the buffer handles to the framework.
+     *
+     * The HAL must write the file descriptor for the input buffer's release
+     * sync fence into input_buffer->release_fence, if input_buffer is not
+     * valid. If the HAL returns -1 for the input buffer release sync fence, the
+     * framework is free to immediately reuse the input buffer. Otherwise, the
+     * framework must wait on the sync fence before refilling and reusing the
+     * input buffer.
+     *
+     * The input/output buffers provided by the framework in each request
+     * may be brand new (having never before seen by the HAL).
+     *
+     * ------------------------------------------------------------------------
+     * Performance considerations:
+     *
+     * Handling a new buffer should be extremely lightweight and there must be
+     * no frame rate degradation or frame jitter introduced.
+     *
+     * This call must return fast enough to ensure that the requested frame
+     * rate can be sustained, especially for streaming cases (post-processing
+     * quality settings set to FAST). The HAL should return this call in 1
+     * frame interval, and must return from this call in 4 frame intervals.
+     *
+     * - The capture request can include individual settings for physical camera devices
+     *   backing a logical multi-camera.
+     *
+     * - The capture request can include width and height of the input buffer for
+     *   a reprocessing request.
+     *
+     * A service specific error will be returned on the following conditions
+     *     ILLEGAL_ARGUMENT:
+     *         If the input is malformed (the settings are empty when not
+     *         allowed, the physical camera settings are invalid, there are 0
+     *         output buffers, etc) and capture processing
+     *         cannot start. Failures during request processing must be
+     *         handled by calling ICameraDeviceCallback::notify(). In case of
+     *         this error, the framework retains responsibility for the
+     *         stream buffers' fences and the buffer handles; the HAL must not
+     *         close the fences or return these buffers with
+     *         ICameraDeviceCallback::processCaptureResult().
+     *         In case of multi-resolution input image, this error must be returned
+     *         if the caller passes in a CaptureRequest with an invalid
+     *         [inputWith, inputHeight].
+     *     INTERNAL_ERROR:
+     *         If the camera device has encountered a serious error. After this
+     *         error is returned, only the close() method can be successfully
+     *         called by the framework.
+     *
+     * @param requests The capture requests to be processed by the camera HAL
+     * @param cachesToRemove list of buffer caches to be removed by the camera HAL
+     * @return Number of requests successfully processed by
+     *     camera HAL. On success, this must be equal to the size of
+     *     requests. When the call fails, this number is the number of requests
+     *     that HAL processed successfully before HAL runs into an error and a service specific
+     *     error is also set.
+     *
+     */
+    int processCaptureRequest(in CaptureRequest[] requests, in BufferCache[] cachesToRemove);
+
+    /**
+     * signalStreamFlush:
+     *
+     * Signaling to the HAL, camera service is about to perform configureStreams and
+     * HAL must return all buffers of designated streams. HAL must finish
+     * inflight requests normally and return all buffers that belongs to the
+     * designated streams through processCaptureResult or returnStreamBuffer
+     * API in a timely manner, or camera service will run into a fatal error.
+     *
+     * Note that this call serves as an optional hint and camera service may
+     * skip sending this call if all buffers are already returned.
+     *
+     * @param streamIds The ID of streams camera service need all of its
+     *     buffers returned.
+     *
+     * @param streamConfigCounter Note that due to concurrency nature, it is
+     *     possible the signalStreamFlush call arrives later than the
+     *     corresponding configureStreams() call, HAL must check
+     *     streamConfigCounter for such race condition. If the counter is less
+     *     than the counter in the last configureStreams() call HAL last
+     *     received, the call is stale and HAL should just return this call.
+     */
+    oneway void signalStreamFlush(in int[] streamIds, in int streamConfigCounter);
+
+    /**
+     * switchToOffline:
+     *
+     * Switch the current running session from actively streaming mode to the
+     * offline mode. See ICameraOfflineSession for more details.
+     *
+     * The streamsToKeep argument contains list of streams IDs where application
+     * still needs its output. For all streams application does not need anymore,
+     * camera HAL can send ERROR_BUFFER to speed up the transition, or even send
+     * ERROR_REQUEST if all output targets of a request is not needed. By the
+     * time this call returns, camera HAL must have returned all buffers coming
+     * from streams no longer needed and have erased buffer caches of such streams.
+     *
+     * For all requests that are going to be transferred to offline session,
+     * the ICameraDeviceSession is responsible to capture all input buffers from
+     * the image sensor before the switchToOffline call returns. Before
+     * switchToOffline returns, camera HAL must have completed all requests not
+     * switching to offline mode, and collected information on what streams and
+     * requests are going to continue in the offline session, in the
+     * offlineSessionInfo output argument.
+     *
+     * If there are no requests qualified to be transferred to offline session,
+     * the camera HAL must return a null ICameraOfflineSession object with OK
+     * status. In this scenario, the camera HAL still must flush all inflight
+     * requests and unconfigure all streams before returning this call.
+     *
+     * After switchToOffline returns, the ICameraDeviceSession must be back to
+     * unconfigured state as if it is just created and no streams are configured.
+     * Also, camera HAL must not call any methods in ICameraDeviceCallback since
+     * all unfinished requests are now transferred to the offline session.
+     * After the call returns, camera service may then call close to close
+     * the camera device, or call configureStream* again to reconfigure the
+     * camera and then send new capture requests with processCaptureRequest. In
+     * the latter case, it is legitimate for camera HAL to call methods in
+     * ICameraDeviceCallback again in response to the newly submitted capture
+     * requests.
+     *
+     * A service specific error will be returned on the following conditions
+     *     ILLEGAL_ARGUMENT:
+     *         If camera does not support offline mode in any one of streams
+     *         in streamsToKeep argument. Note that the camera HAL must report
+     *         if a stream supports offline mode in HalStreamConfiguration
+     *         output of configureStreams_3_6 method. If all streams in
+     *         streamsToKeep argument support offline mode, then the camera HAL
+     *         must not return this error.
+     *
+     * @param in streamsToKeep The streamIds of the streams that will continue in the offline
+     *        session
+     * @param out offlineSessionInfo Information on what streams and requests will
+     *     be transferred to offline session to continue processing.
+     *
+     * @return offlineSession The offline session object camera service will use
+     *     to interact with.
+     */
+    ICameraOfflineSession switchToOffline(
+            in int[] streamsToKeep, out CameraOfflineSessionInfo offlineSessionInfo);
+
+    /**
+     * repeatingRequestEnd:
+     *
+     * Notification about the last frame number in a repeating request along with the
+     * ids of all streams included in the repeating request.
+     *
+     * This can be called at any point after 'processCaptureRequest' in response
+     * to camera clients disabling an active repeating request.
+     *
+     * Performance requirements:
+     * The call must not be blocked for extensive periods and should be extremely lightweight. There
+     * must be no frame rate degradation or frame jitter introduced.
+     *
+     * This method must always succeed, even if the device has encountered a
+     * serious error.
+     */
+    void repeatingRequestEnd(in int frameNumber, in int[] streamIds);
+
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ICameraInjectionSession.aidl b/camera/device/aidl/android/hardware/camera/device/ICameraInjectionSession.aidl
new file mode 100644
index 0000000..ecb8a27
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ICameraInjectionSession.aidl
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.CameraMetadata;
+import android.hardware.camera.device.ICameraDeviceSession;
+import android.hardware.camera.device.StreamConfiguration;
+
+/**
+ * Camera device active session interface.
+ *
+ * Obtained via ICameraDevice::open(), this interface contains the methods to
+ * configure and request captures from an active camera device.
+ */
+@VintfStability
+interface ICameraInjectionSession {
+    /**
+     * configureInjectionStreams:
+     *
+     * Identical to ICameraDeviceSession.configureStreams, except that:
+     *
+     * @param requestedConfiguration
+     *     The current stream configuration of the internal camera session and
+     *     the injection camera must follow the configuration without overriding
+     *     any part of it.
+     * @param characteristics
+     *     The characteristics of internal camera contains a list of keys so that
+     *     the stream continuity can be maintained after the external camera is
+     *     injected.
+     *
+     * A service specific error will be returned on the following conditions
+     *
+     *     INTERNAL_ERROR:
+     *         If there has been a fatal error and the device is no longer
+     *         operational. Only close() can be called successfully by the
+     *         framework after this error is returned.
+     *     ILLEGAL_ARGUMENT:
+     *         If the requested stream configuration is invalid. Some examples
+     *         of invalid stream configurations include:
+     *           - Not including any OUTPUT streams
+     *           - Including streams with unsupported formats, or an unsupported
+     *             size for that format.
+     *           - Including too many output streams of a certain format.
+     *           - Unsupported rotation configuration
+     *           - Stream sizes/formats don't satisfy the
+     *             StreamConfigurationMode requirements
+     *             for non-NORMAL mode, or the requested operation_mode is not
+     *             supported by the HAL.
+     *           - Unsupported usage flag
+     *         The camera service cannot filter out all possible illegal stream
+     *         configurations, since some devices may support more simultaneous
+     *         streams or larger stream resolutions than the minimum required
+     *         for a given camera device hardware level. The HAL must return an
+     *         ILLEGAL_ARGUMENT for any unsupported stream set, and then be
+     *         ready to accept a future valid stream configuration in a later
+     *         configureInjectionStreams call.
+     */
+    void configureInjectionStreams(
+            in StreamConfiguration requestedConfiguration, in CameraMetadata characteristics);
+
+    /**
+     * Retrieves the ICameraDeviceSession interface in order for the camera framework to be able
+     * to use the injection session for all of the operations that a non-injected
+     * ICameraDeviceSession would be able to perform.
+     */
+    ICameraDeviceSession getCameraDeviceSession();
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ICameraOfflineSession.aidl b/camera/device/aidl/android/hardware/camera/device/ICameraOfflineSession.aidl
new file mode 100644
index 0000000..ec35b36
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ICameraOfflineSession.aidl
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.ICameraDeviceCallback;
+import android.hardware.common.fmq.MQDescriptor;
+import android.hardware.common.fmq.SynchronizedReadWrite;
+
+/**
+ * Camera device offline session interface.
+ *
+ * Obtained via ICameraDeviceSession::switchToOffline(), this interface contains
+ * the methods and callback interfaces that define how camera service interacts
+ * with an offline session.
+ *
+ * An offline session contains some unfinished capture requests that were submitted
+ * to the parent ICameraDeviceSession before calling switchToOffline, and is
+ * responsible for delivering these capture results back to camera service regardless
+ * of whether the parent camera device is still opened or not. An offline session must
+ * not have access to the camera device's image sensor. During switchToOffline
+ * call, camera HAL must capture all necessary frames from the image sensor that
+ * is needed for completing the requests offline later.
+ */
+@VintfStability
+interface ICameraOfflineSession {
+    /**
+     * Close the offline session and release all resources.
+     *
+     * Camera service may call this method before or after the offline session
+     * has finished all requests it needs to handle. If there are still unfinished
+     * requests when close is called, camera HAL must send ERROR_REQUEST for
+     * all unfinished requests and return all buffers via
+     * ICameraDeviceCallback#processCaptureResult or
+     * ICameraDeviceCallback#returnStreamBuffers.
+     * Also, all buffer caches maintained by the offline session must be erased
+     * before the close call returns.
+     */
+    void close();
+
+    /**
+     * getCaptureResultMetadataQueue:
+     *
+     * Retrieves the queue used along with
+     * ICameraDeviceCallback#processCaptureResult.
+     *
+     * Clients to ICameraOfflineSession must:
+     * - Call getCaptureRequestMetadataQueue to retrieve the fast message queue;
+     * - In implementation of ICameraDeviceCallback, test whether
+     *   .fmqResultSize field is zero.
+     *     - If .fmqResultSize != 0, read result metadata from the fast message
+     *       queue;
+     *     - otherwise, read result metadata in CaptureResult.result.
+     *
+     * @return the queue that implementation writes result metadata to.
+     */
+    MQDescriptor<byte, SynchronizedReadWrite> getCaptureResultMetadataQueue();
+
+    /**
+     * Set the callbacks for offline session to communicate with camera service.
+     *
+     * Offline session is responsible to store all callbacks the camera HAL
+     * generated after the return of ICameraDeviceSession::switchToOffline, and
+     * send them to camera service once this method is called.
+     *
+     * Camera service must not call this method more than once, so these
+     * callbacks can be assumed to be constant after the first setCallback call.
+     */
+    void setCallback(in ICameraDeviceCallback cb);
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/NotifyMsg.aidl b/camera/device/aidl/android/hardware/camera/device/NotifyMsg.aidl
new file mode 100644
index 0000000..7910967
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/NotifyMsg.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.ErrorMsg;
+import android.hardware.camera.device.ShutterMsg;
+
+/**
+ * NotifyMsg:
+ *
+ * The message structure sent to ICameraDeviceCallback::notify()
+ */
+@VintfStability
+union NotifyMsg {
+    /**
+     * Error message contents.
+     */
+    ErrorMsg error;
+
+    /**
+     * Shutter message contents.
+     */
+    ShutterMsg shutter;
+
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/OfflineRequest.aidl b/camera/device/aidl/android/hardware/camera/device/OfflineRequest.aidl
new file mode 100644
index 0000000..ccfc50f
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/OfflineRequest.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * OfflineRequest:
+ *
+ * Information about a capture request being switched to offline mode via the
+ * ICameraDeviceSession#switchToOffline method.
+ *
+ */
+@VintfStability
+parcelable OfflineRequest {
+    /**
+     * Must match a inflight CaptureRequest sent by camera service
+     */
+    int frameNumber;
+
+    /**
+     * Stream IDs for outputs that will be returned via ICameraDeviceCallback.
+     * The stream ID must be within one of offline stream listed in
+     * CameraOfflineSessionInfo.
+     * Camera service will validate these pending buffers are matching camera
+     * service's record to make sure no buffers are leaked during the
+     * switchToOffline call.
+     */
+    int[] pendingStreams;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/OfflineStream.aidl b/camera/device/aidl/android/hardware/camera/device/OfflineStream.aidl
new file mode 100644
index 0000000..0b95449
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/OfflineStream.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * OfflineStream:
+ *
+ * Information about a stream being switched to offline mode via the
+ * ICameraDeviceSession#switchToOffline method.
+ *
+ */
+@VintfStability
+parcelable OfflineStream {
+    /**
+     * IDs of a stream to be transferred to offline session.
+     *
+     * For devices that do not support HAL buffer management, this must be
+     * one of stream ID listed in streamsToKeep argument of the
+     * switchToOffline call.
+     * For devices that support HAL buffer management, this could be any stream
+     * that was configured right before calling switchToOffline.
+     */
+    int id;
+
+    /**
+     * Number of outstanding buffers that will be returned via offline session
+     */
+    int numOutstandingBuffers;
+
+    /**
+     * Buffer ID of buffers currently cached between camera service and this
+     * stream, which may or may not be owned by the camera HAL right now.
+     * See StreamBuffer#bufferId for more details.
+     */
+    long[] circulatingBufferIds;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/PhysicalCameraMetadata.aidl b/camera/device/aidl/android/hardware/camera/device/PhysicalCameraMetadata.aidl
new file mode 100644
index 0000000..ea88802
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/PhysicalCameraMetadata.aidl
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.CameraMetadata;
+
+/**
+ * PhysicalCameraMetadata:
+ *
+ * Individual camera metadata for a physical camera as part of a logical
+ * multi-camera. Camera HAL should return one such metadata for each physical
+ * camera being requested on.
+ */
+@VintfStability
+parcelable PhysicalCameraMetadata {
+    /**
+     * If non-zero, read metadata from result metadata queue instead
+     * (see ICameraDeviceSession.getCaptureResultMetadataQueue).
+     * If zero, read metadata from .metadata field.
+     *
+     * The logical CaptureResult metadata is read first from the FMQ, followed by
+     * the physical cameras' metadata starting from index 0.
+     */
+    long fmqMetadataSize;
+
+    /**
+     * Contains the physical device camera id. As long as the corresponding
+     * processCaptureRequest requests on a particular physical camera stream,
+     * the metadata for that physical camera should be generated for the capture
+     * result.
+     */
+    String physicalCameraId;
+
+    /**
+     * If fmqMetadataSize is zero, the metadata buffer contains the metadata
+     * for the physical device with physicalCameraId.
+     */
+    CameraMetadata metadata;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/PhysicalCameraSetting.aidl b/camera/device/aidl/android/hardware/camera/device/PhysicalCameraSetting.aidl
new file mode 100644
index 0000000..a8c235f
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/PhysicalCameraSetting.aidl
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.CameraMetadata;
+
+/**
+ * PhysicalCameraSetting:
+ *
+ * Individual camera settings for logical camera backed by multiple physical devices.
+ * Clients are allowed to pass separate settings for each physical device that has
+ * corresponding configured HalStream and the respective stream id is present in the
+ * output buffers of the capture request.
+ */
+@VintfStability
+parcelable PhysicalCameraSetting {
+    /**
+     * If non-zero, read settings from request queue instead
+     * (see ICameraDeviceSession.getCaptureRequestMetadataQueue).
+     * If zero, read settings from .settings field.
+     *
+     * The logical settings metadata is read first from the FMQ, followed by
+     * the physical cameras' settings metadata starting from index 0.
+     */
+    long fmqSettingsSize;
+
+    /**
+     * Contains the physical device camera id. Any settings passed by client here
+     * should be applied for this physical device. In case the physical id is invalid or
+     * it is not present among the last configured streams, Hal should fail the process
+     * request and return Status::ILLEGAL_ARGUMENT.
+     */
+    String physicalCameraId;
+
+    /**
+     * If fmqSettingsSize is zero, the settings buffer contains the capture and
+     * processing parameters for the physical device with id 'physicalCameraId'.
+     * As a special case, an empty settings buffer indicates that the
+     * settings are identical to the most-recently submitted capture request.
+     * An empty buffer cannot be used as the first submitted request after
+     * a configureStreams() call.
+     *
+     * This field must be used if fmqSettingsSize is zero. It must not be used
+     * if fmqSettingsSize is non-zero.
+     */
+    CameraMetadata settings;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/RequestTemplate.aidl b/camera/device/aidl/android/hardware/camera/device/RequestTemplate.aidl
new file mode 100644
index 0000000..0235d8a
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/RequestTemplate.aidl
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * RequestTemplate:
+ *
+ * Available template types for
+ * ICameraDevice::constructDefaultRequestSettings()
+ */
+@VintfStability
+@Backing(type="int")
+enum RequestTemplate {
+    /**
+     * Standard camera preview operation with 3A on auto.
+     */
+    PREVIEW = 1,
+
+    /**
+     * Standard camera high-quality still capture with 3A and flash on auto.
+     */
+    STILL_CAPTURE = 2,
+
+    /**
+     * Standard video recording plus preview with 3A on auto, torch off.
+     */
+    VIDEO_RECORD = 3,
+
+    /**
+     * High-quality still capture while recording video. Applications typically
+     * include preview, video record, and full-resolution YUV or JPEG streams in
+     * request. Must not cause stuttering on video stream. 3A on auto.
+     */
+    VIDEO_SNAPSHOT = 4,
+
+    /**
+     * Zero-shutter-lag mode. Application typically request preview and
+     * full-resolution data for each frame, and reprocess it to JPEG when a
+     * still image is requested by user. Settings must provide highest-quality
+     * full-resolution images without compromising preview frame rate. 3A on
+     * auto.
+     */
+    ZERO_SHUTTER_LAG = 5,
+
+    /**
+     * A basic template for direct application control of capture
+     * parameters. All automatic control is disabled (auto-exposure, auto-white
+     * balance, auto-focus), and post-processing parameters are set to preview
+     * quality. The manual capture parameters (exposure, sensitivity, etc.)
+     * are set to reasonable defaults, but may be overridden by the
+     * application depending on the intended use case.
+     */
+    MANUAL = 6,
+
+    /**
+     * First value for vendor-defined request templates
+     */
+    VENDOR_TEMPLATE_START = 0x40000000,
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/ShutterMsg.aidl b/camera/device/aidl/android/hardware/camera/device/ShutterMsg.aidl
new file mode 100644
index 0000000..24ae1a0
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/ShutterMsg.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * ShutterMsg:
+ *
+ * Message contents for MsgType::SHUTTER
+ */
+@VintfStability
+parcelable ShutterMsg {
+    /**
+     * Frame number of the request that has begun exposure or reprocessing.
+     */
+    int frameNumber;
+
+    /**
+     * Timestamp for the start of capture. For a reprocess request, this must
+     * be input image's start of capture. This must match the capture result
+     * metadata's sensor exposure start timestamp.
+     */
+    long timestamp;
+
+    /**
+     * Timestamp for the capture readout. This must be in the same time domain
+     * as timestamp, and for a rolling shutter sensor, the value must be
+     * timestamp + exposureTime + t_crop_top where t_crop_top is the exposure time
+     * skew of the cropped lines on the top.
+     */
+    long readoutTimestamp;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/Stream.aidl b/camera/device/aidl/android/hardware/camera/device/Stream.aidl
new file mode 100644
index 0000000..b3291b0
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/Stream.aidl
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.StreamRotation;
+import android.hardware.camera.device.StreamType;
+
+/**
+ * Stream:
+ *
+ * A descriptor for a single camera input or output stream. A stream is defined
+ * by the framework by its buffer resolution and format, and additionally by the
+ * HAL with the gralloc usage flags and the maximum in-flight buffer count.
+ *
+ * Also contains the multi-resolution output surface group Id field, sensor pixel modes and
+ * dynamic range profile.
+ */
+@VintfStability
+parcelable Stream {
+    /**
+     * Stream ID - a nonnegative integer identifier for a stream.
+     *
+     * The identical stream ID must reference the same stream, with the same
+     * width/height/format, across consecutive calls to configureStreams.
+     *
+     * If previously-used stream ID is not used in a new call to
+     * configureStreams, then that stream is no longer active. Such a stream ID
+     * may be reused in a future configureStreams with a new
+     * width/height/format.
+     *
+     */
+    int id;
+
+    /**
+     * The type of the stream (input vs output, etc).
+     */
+    StreamType streamType;
+
+    /**
+     * The width in pixels of the buffers in this stream
+     */
+    int width;
+
+    /**
+     * The height in pixels of the buffers in this stream
+     */
+    int height;
+
+    /**
+     * The pixel format for the buffers in this stream.
+     *
+     * If IMPLEMENTATION_DEFINED is used, then the platform
+     * gralloc module must select a format based on the usage flags provided by
+     * the camera device and the other endpoint of the stream.
+     *
+     */
+    android.hardware.graphics.common.PixelFormat format;
+
+    /**
+     * The bitfield of gralloc usage flags for this stream, as needed by the consumer of
+     * the stream.
+     *
+     * The usage flags from the producer and the consumer must be combined
+     * together and then passed to the platform gralloc HAL module for
+     * allocating the gralloc buffers for each stream.
+     *
+     * The HAL may use these consumer flags to decide stream configuration. For
+     * streamType INPUT, the value of this field is always 0. For all streams
+     * passed via configureStreams(), the HAL must set its own
+     * additional usage flags in its output HalStreamConfiguration.
+     *
+     * The usage flag for an output stream may be bitwise combination of usage
+     * flags for multiple consumers, for the purpose of sharing one camera
+     * stream between those consumers. The HAL must fail configureStreams call
+     * with ILLEGAL_ARGUMENT if the combined flags cannot be supported due to
+     * imcompatible buffer format, dataSpace, or other hardware limitations.
+     */
+    android.hardware.graphics.common.BufferUsage usage;
+
+    /**
+     * A bitfield that describes the contents of the buffer. The format and buffer
+     * dimensions define the memory layout and structure of the stream buffers,
+     * while dataSpace defines the meaning of the data within the buffer.
+     *
+     * For most formats, dataSpace defines the color space of the image data.
+     * In addition, for some formats, dataSpace indicates whether image- or
+     * depth-based data is requested. See
+     * android.hardware.graphics.common@1.0::types for details of formats and
+     * valid dataSpace values for each format.
+     *
+     * The HAL must use this dataSpace to configure the stream to the correct
+     * colorspace, or to select between color and depth outputs if
+     * supported. The dataspace values are set using the V0 dataspace
+     * definitions.
+     */
+    android.hardware.graphics.common.Dataspace dataSpace;
+
+    /**
+     * The required output rotation of the stream.
+     *
+     * This must be inspected by HAL along with stream width and height. For
+     * example, if the rotation is 90 degree and the stream width and height is
+     * 720 and 1280 respectively, camera service must supply buffers of size
+     * 720x1280, and HAL must capture a 1280x720 image and rotate the image by
+     * 90 degree counterclockwise. The rotation field must be ignored when the
+     * stream type is input.
+     *
+     * The HAL must inspect this field during stream configuration and return
+     * IllegalArgument if HAL cannot perform such rotation. HAL must always
+     * support ROTATION_0, so a configureStreams() call must not fail for
+     * unsupported rotation if rotation field of all streams is ROTATION_0.
+     *
+     */
+    StreamRotation rotation;
+
+    /**
+     * The physical camera id this stream belongs to.
+     *
+     * If the camera device is not a logical multi camera, or if the camera is a logical
+     * multi camera but the stream is not a physical output stream, this field will point to a
+     * 0-length string.
+     *
+     * A logical multi camera is a camera device backed by multiple physical cameras that
+     * are also exposed to the application. And for a logical multi camera, a physical output
+     * stream is an output stream specifically requested on an underlying physical camera.
+     *
+     * A logical camera is a camera device backed by multiple physical camera
+     * devices. And a physical stream is a stream specifically requested on a
+     * underlying physical camera device.
+     *
+     * For an input stream, this field is guaranteed to be a 0-length string.
+     *
+     * When not empty, this field is the <id> field of one of the full-qualified device
+     * instance names returned by getCameraIdList().
+     */
+    String physicalCameraId;
+
+    /**
+     * The size of a buffer from this Stream, in bytes.
+     *
+     * For non PixelFormat::BLOB formats, this entry must be 0 and HAL should use
+     * android.hardware.graphics.mapper lockYCbCr API to get buffer layout.
+     *
+     * For BLOB format with dataSpace Dataspace::DEPTH, this must be zero and HAL must
+     * determine the buffer size based on ANDROID_DEPTH_MAX_DEPTH_SAMPLES.
+     *
+     * For BLOB format with dataSpace Dataspace::JFIF, this must be non-zero and represent the
+     * maximal size HAL can lock using android.hardware.graphics.mapper lock API.
+     *
+     */
+    int bufferSize;
+
+    /**
+     * The surface group id used for multi-resolution output streams.
+     *
+     * This works similar to the surfaceGroupId of OutputConfiguration in the
+     * public API, with the exception that this is for multi-resolution image
+     * reader and is used by the camera HAL to choose a target stream within
+     * the same group to which images are written. All streams in the same group
+     * will have the same image format, data space, and usage flag.
+     *
+     * The framework must only call processCaptureRequest on at most one of the
+     * streams within a surface group. Depending on current active physical
+     * camera backing the logical multi-camera, or the pixel mode the camera is
+     * running in, the HAL can choose to request and return a buffer from any
+     * stream within the same group. -1 means that this stream is an input
+     * stream, or is an output stream which doesn't belong to any group.
+     *
+     * Streams with the same non-negative group id must have the same format and
+     * usage flag.
+     */
+    int groupId;
+
+    /**
+     *  The sensor pixel modes used by this stream. This can assist the camera
+     *  HAL in decision making about stream combination support.
+     *  If this is empty, the HAL must assume that this stream will only be used
+     *  with ANDROID_SENSOR_PIXEL_MODE set to ANDROID_SENSOR_PIXEL_MODE_DEFAULT.
+     */
+    android.hardware.camera.metadata.SensorPixelMode[] sensorPixelModesUsed;
+
+    /**
+     * The dynamic range profile for this stream.
+     *
+     * This field is valid and must only be considered for streams with format
+     * android.hardware.graphics.common.PixelFormat.YCBCR_P010 or
+     * android.hardware.graphics.common.PixelFormat.IMPLEMENTATION_DEFINED on devices supporting the
+     * ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DYNAMIC_RANGE_10_BIT capability.
+     *
+     */
+    android.hardware.camera.metadata.RequestAvailableDynamicRangeProfilesMap dynamicRangeProfile;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamBuffer.aidl b/camera/device/aidl/android/hardware/camera/device/StreamBuffer.aidl
new file mode 100644
index 0000000..e487494
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/StreamBuffer.aidl
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.BufferStatus;
+import android.hardware.common.NativeHandle;
+
+/**
+ * StreamBuffer:
+ *
+ * A single buffer from a camera HAL stream. It includes a handle to its parent
+ * stream, the handle to the gralloc buffer itself, and sync fences
+ *
+ * The buffer does not specify whether it is to be used for input or output;
+ * that is determined by its parent stream type and how the buffer is passed to
+ * the HAL device.
+ */
+@VintfStability
+parcelable StreamBuffer {
+    /**
+     * The ID of the stream this buffer is associated with. -1 indicates an
+     * invalid (empty) StreamBuffer, in which case buffer must also point to
+     * null and bufferId must be 0.
+     */
+    int streamId;
+
+    /**
+     * The unique ID of the buffer within this StreamBuffer. 0 indicates this
+     * StreamBuffer contains no buffer.
+     * For StreamBuffers sent to the HAL in a CaptureRequest, this ID uniquely
+     * identifies a buffer. When a buffer is sent to HAL for the first time,
+     * both bufferId and buffer handle must be filled. HAL must keep track of
+     * the mapping between bufferId and corresponding buffer until the
+     * corresponding stream is removed from stream configuration or until camera
+     * device session is closed. After the first time a buffer is introduced to
+     * HAL, in the future camera service must refer to the same buffer using
+     * only bufferId, and keep the buffer handle null.
+     */
+    long bufferId;
+
+    /**
+     * The graphics buffer handle to the buffer.
+     *
+     * For StreamBuffers sent to the HAL in a CaptureRequest, if the bufferId
+     * is not seen by the HAL before, this buffer handle is guaranteed to be a
+     * valid handle to a graphics buffer, with dimensions and format matching
+     * that of the stream. If the bufferId has been sent to the HAL before, this
+     * buffer handle must be null and HAL must look up the actual buffer handle
+     * to use from its own bufferId to buffer handle map.
+     *
+     * For StreamBuffers returned in a CaptureResult, this must be null, since
+     * the handle to the buffer is already known to the client (since the client
+     * sent it in the matching CaptureRequest), and the handle can be identified
+     * by the combination of frame number and stream ID.
+     */
+    NativeHandle buffer;
+
+    /**
+     * Current state of the buffer. The framework must not pass buffers to the
+     * HAL that are in an error state. In case a buffer could not be filled by
+     * the HAL, it must have its status set to ERROR when returned to the
+     * framework with processCaptureResult().
+     */
+    BufferStatus status;
+
+    /**
+     * The acquire sync fence for this buffer. The HAL must wait on this fence
+     * fd before attempting to read from or write to this buffer.
+     *
+     * In a buffer included in a CaptureRequest, the client may set this to null
+     * to indicate that no waiting is necessary for this buffer.
+     *
+     * When the HAL returns an input or output buffer to the framework with
+     * processCaptureResult(), the acquireFence must be set to null. If the HAL
+     * never waits on the acquireFence due to an error in filling or reading a
+     * buffer, when calling processCaptureResult() the HAL must set the
+     * releaseFence of the buffer to be the acquireFence passed to it by the
+     * client. This allows the client to wait on the fence before reusing the
+     * buffer.
+     */
+    NativeHandle acquireFence;
+
+    /**
+     * The release sync fence for this buffer. The HAL must set this to a valid
+     * fence fd when returning the input buffer or output buffers to the client
+     * in a CaptureResult, or set it to null to indicate that no waiting is
+     * required for this buffer.
+     *
+     * The client must set this to be null for all buffers included in a
+     * processCaptureRequest call.
+     *
+     * After signaling the releaseFence for this buffer, the HAL
+     * must not make any further attempts to access this buffer as the
+     * ownership has been fully transferred back to the client.
+     *
+     * If this is null, then the ownership of this buffer is transferred back
+     * immediately upon the call of processCaptureResult.
+     */
+    NativeHandle releaseFence;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamBufferRequestError.aidl b/camera/device/aidl/android/hardware/camera/device/StreamBufferRequestError.aidl
new file mode 100644
index 0000000..4ba0045
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/StreamBufferRequestError.aidl
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+@VintfStability
+@Backing(type="int")
+enum StreamBufferRequestError {
+    /**
+     * Get buffer failed due to timeout waiting for an available buffer. This is
+     * likely due to the client application holding too many buffers, or the
+     * system is under memory pressure.
+     * This is not a fatal error. HAL may try to request buffer for this stream
+     * later. If HAL cannot get a buffer for certain capture request in time
+     * due to this error, HAL can send an ERROR_REQUEST to camera service and
+     * drop processing that request.
+     */
+    NO_BUFFER_AVAILABLE = 1,
+    /**
+     * Get buffer failed due to HAL has reached its maxBuffer count. This is not
+     * a fatal error. HAL may try to request buffer for this stream again after
+     * it returns at least one buffer of that stream to camera service.
+     */
+    MAX_BUFFER_EXCEEDED = 2,
+    /**
+     * Get buffer failed due to the stream is disconnected by client
+     * application, has been removed, or not recognized by camera service.
+     * This means application is no longer interested in this stream.
+     * Requesting buffer for this stream must never succeed after this error is
+     * returned. HAL must safely return all buffers of this stream after
+     * getting this error. If HAL gets another capture request later targeting
+     * a disconnected stream, HAL must send an ERROR_REQUEST to camera service
+     * and drop processing that request.
+     */
+    STREAM_DISCONNECTED = 3,
+    /**
+     * Get buffer failed for unknown reasons. This is a fatal error and HAL must
+     * send ERROR_DEVICE to camera service and be ready to be closed.
+     */
+    UNKNOWN_ERROR = 4,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/device/aidl/android/hardware/camera/device/StreamBufferRet.aidl
similarity index 76%
copy from audio/7.1/IStreamIn.hal
copy to camera/device/aidl/android/hardware/camera/device/StreamBufferRet.aidl
index abebe6a..b6d85c2 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/device/aidl/android/hardware/camera/device/StreamBufferRet.aidl
@@ -14,9 +14,13 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.device;
 
-import @7.0::IStreamIn;
+import android.hardware.camera.device.StreamBuffersVal;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+@VintfStability
+parcelable StreamBufferRet {
+    int streamId;
+
+    StreamBuffersVal val;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamBuffersVal.aidl b/camera/device/aidl/android/hardware/camera/device/StreamBuffersVal.aidl
new file mode 100644
index 0000000..125d9c7
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/StreamBuffersVal.aidl
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.StreamBuffer;
+import android.hardware.camera.device.StreamBufferRequestError;
+
+/**
+ * Per-stream return value for requestStreamBuffers.
+ * For each stream, either an StreamBufferRequestError error code, or all
+ * requested buffers for this stream is returned, so buffers.size() must be
+ * equal to BufferRequest::numBuffersRequested of corresponding stream.
+ */
+@VintfStability
+union StreamBuffersVal {
+    StreamBufferRequestError error = StreamBufferRequestError.UNKNOWN_ERROR;
+
+    StreamBuffer[] buffers;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamConfiguration.aidl b/camera/device/aidl/android/hardware/camera/device/StreamConfiguration.aidl
new file mode 100644
index 0000000..cacd32c
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/StreamConfiguration.aidl
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+import android.hardware.camera.device.CameraMetadata;
+import android.hardware.camera.device.Stream;
+import android.hardware.camera.device.StreamConfigurationMode;
+
+/**
+ * StreamConfiguration:
+ *
+ * A structure of stream definitions, used by configureStreams(). This
+ * structure defines all the output streams and the reprocessing input
+ * stream for the current camera use case.
+ */
+@VintfStability
+parcelable StreamConfiguration {
+    /**
+     * An array of camera stream pointers, defining the input/output
+     * configuration for the camera HAL device.
+     */
+    Stream[] streams;
+
+    /**
+     * The operation mode of streams in this configuration. The HAL can use this
+     * mode as an indicator to set the stream property (e.g.,
+     * HalStream.maxBuffers) appropriately. For example, if the
+     * configuration is
+     * CONSTRAINED_HIGH_SPEED_MODE, the HAL may
+     * want to set aside more buffers for batch mode operation (see
+     * android.control.availableHighSpeedVideoConfigurations for batch mode
+     * definition).
+     *
+     */
+    StreamConfigurationMode operationMode;
+
+    /**
+     * Session wide camera parameters.
+     *
+     * The session parameters contain the initial values of any request keys that were
+     * made available via ANDROID_REQUEST_AVAILABLE_SESSION_KEYS. The Hal implementation
+     * can advertise any settings that can potentially introduce unexpected delays when
+     * their value changes during active process requests. Typical examples are
+     * parameters that trigger time-consuming HW re-configurations or internal camera
+     * pipeline updates. The field is optional, clients can choose to ignore it and avoid
+     * including any initial settings. If parameters are present, then hal must examine
+     * their values and configure the internal camera pipeline accordingly.
+     */
+    CameraMetadata sessionParams;
+
+   /**
+     * An incrementing counter used for HAL to keep track of the stream
+     * configuration and the paired oneway signalStreamFlush call. When the
+     * counter in signalStreamFlush call is less than the counter here, that
+     * signalStreamFlush call is stale.
+     */
+    int streamConfigCounter;
+
+    /**
+     * If an input stream is configured, whether the input stream is expected to
+     * receive variable resolution images.
+     *
+     * This flag can only be set to true if the camera device supports
+     * multi-resolution input streams by advertising input stream configurations in
+     * physicalCameraMultiResolutionStreamConfigurations in its physical cameras'
+     * characteristics.
+     *
+     * When this flag is set to true, the input stream's width and height can be
+     * any one of the supported multi-resolution input stream sizes.
+     */
+    boolean multiResolutionInputImage;
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamConfigurationMode.aidl b/camera/device/aidl/android/hardware/camera/device/StreamConfigurationMode.aidl
new file mode 100644
index 0000000..10feecb
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/StreamConfigurationMode.aidl
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * StreamConfigurationMode:
+ *
+ * This defines the general operation mode for the HAL (for a given stream
+ * configuration) where modes besides NORMAL have different semantics, and
+ * usually limit the generality of the API in exchange for higher performance in
+ * some particular area.
+ */
+@VintfStability
+@Backing(type="int")
+enum StreamConfigurationMode {
+    /**
+     * Normal stream configuration operation mode. This is the default camera
+     * operation mode, where all semantics of HAL APIs and metadata controls
+     * apply.
+     */
+    NORMAL_MODE = 0,
+
+    /**
+     * Special constrained high speed operation mode for devices that can not
+     * support high speed output in NORMAL mode. All streams in this
+     * configuration are operating at high speed mode and have different
+     * characteristics and limitations to achieve high speed output. The NORMAL
+     * mode can still be used for high speed output if the HAL can support high
+     * speed output while satisfying all the semantics of HAL APIs and metadata
+     * controls. It is recommended for the HAL to support high speed output in
+     * NORMAL mode (by advertising the high speed FPS ranges in
+     * android.control.aeAvailableTargetFpsRanges) if possible.
+     *
+     * This mode has below limitations/requirements:
+     *
+     *   1. The HAL must support up to 2 streams with sizes reported by
+     *      android.control.availableHighSpeedVideoConfigurations.
+     *   2. In this mode, the HAL is expected to output up to 120fps or
+     *      higher. This mode must support the targeted FPS range and size
+     *      configurations reported by
+     *      android.control.availableHighSpeedVideoConfigurations.
+     *   3. The HAL must support IMPLEMENTATION_DEFINED output
+     *      stream format.
+     *   4. To achieve efficient high speed streaming, the HAL may have to
+     *      aggregate multiple frames together and send to camera device for
+     *      processing where the request controls are same for all the frames in
+     *      this batch (batch mode). The HAL must support max batch size and the
+     *      max batch size requirements defined by
+     *      android.control.availableHighSpeedVideoConfigurations.
+     *   5. In this mode, the HAL must override aeMode, awbMode, and afMode to
+     *      ON, ON, and CONTINUOUS_VIDEO, respectively. All post-processing
+     *      block mode controls must be overridden to be FAST. Therefore, no
+     *      manual control of capture and post-processing parameters is
+     *      possible. All other controls operate the same as when
+     *      android.control.mode == AUTO. This means that all other
+     *      android.control.* fields must continue to work, such as
+     *
+     *      android.control.aeTargetFpsRange
+     *      android.control.aeExposureCompensation
+     *      android.control.aeLock
+     *      android.control.awbLock
+     *      android.control.effectMode
+     *      android.control.aeRegions
+     *      android.control.afRegions
+     *      android.control.awbRegions
+     *      android.control.afTrigger
+     *      android.control.aePrecaptureTrigger
+     *
+     *      Outside of android.control.*, the following controls must work:
+     *
+     *      android.flash.mode (TORCH mode only, automatic flash for still
+     *          capture must not work since aeMode is ON)
+     *      android.lens.opticalStabilizationMode (if it is supported)
+     *      android.scaler.cropRegion
+     *      android.statistics.faceDetectMode (if it is supported)
+     *   6. To reduce the amount of data passed across process boundaries at
+     *      high frame rate, within one batch, camera framework only propagates
+     *      the last shutter notify and the last capture results (including partial
+     *      results and final result) to the app. The shutter notifies and capture
+     *      results for the other requests in the batch are derived by
+     *      the camera framework. As a result, the HAL can return empty metadata
+     *      except for the last result in the batch.
+     *
+     * For more details about high speed stream requirements, see
+     * android.control.availableHighSpeedVideoConfigurations and
+     * CONSTRAINED_HIGH_SPEED_VIDEO capability defined in
+     * android.request.availableCapabilities.
+     *
+     * This mode only needs to be supported by HALs that include
+     * CONSTRAINED_HIGH_SPEED_VIDEO in the android.request.availableCapabilities
+     * static metadata.
+     */
+    CONSTRAINED_HIGH_SPEED_MODE = 1,
+
+    /**
+     * A set of vendor-defined operating modes, for custom default camera
+     * application features that can't be implemented in the fully flexible fashion
+     * required for NORMAL_MODE.
+     */
+    VENDOR_MODE_0 = 0x8000,
+    VENDOR_MODE_1,
+    VENDOR_MODE_2,
+    VENDOR_MODE_3,
+    VENDOR_MODE_4,
+    VENDOR_MODE_5,
+    VENDOR_MODE_6,
+    VENDOR_MODE_7,
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamRotation.aidl b/camera/device/aidl/android/hardware/camera/device/StreamRotation.aidl
new file mode 100644
index 0000000..1eee97c
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/StreamRotation.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * StreamRotation:
+ *
+ * The required counterclockwise rotation of camera stream.
+ */
+@VintfStability
+@Backing(type="int")
+enum StreamRotation {
+    /**
+     * No rotation
+     */
+    ROTATION_0 = 0,
+
+    /**
+     * Rotate by 90 degree counterclockwise
+     */
+    ROTATION_90 = 1,
+
+    /**
+     * Rotate by 180 degree counterclockwise
+     */
+    ROTATION_180 = 2,
+
+    /**
+     * Rotate by 270 degree counterclockwise
+     */
+    ROTATION_270 = 3,
+}
diff --git a/camera/device/aidl/android/hardware/camera/device/StreamType.aidl b/camera/device/aidl/android/hardware/camera/device/StreamType.aidl
new file mode 100644
index 0000000..4a876c7
--- /dev/null
+++ b/camera/device/aidl/android/hardware/camera/device/StreamType.aidl
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.device;
+
+/**
+ * StreamType:
+ *
+ * The type of the camera stream, which defines whether the camera HAL device is
+ * the producer or the consumer for that stream, and how the buffers of the
+ * stream relate to the other streams.
+ */
+@VintfStability
+@Backing(type="int")
+enum StreamType {
+    /**
+     * This stream is an output stream; the camera HAL device must fill buffers
+     * from this stream with newly captured or reprocessed image data.
+     */
+    OUTPUT = 0,
+
+    /**
+     * This stream is an input stream; the camera HAL device must read buffers
+     * from this stream and send them through the camera processing pipeline,
+     * as if the buffer was a newly captured image from the imager.
+     *
+     * The pixel format for input stream can be any format reported by
+     * android.scaler.availableInputOutputFormatsMap. The pixel format of the
+     * output stream that is used to produce the reprocessing data may be any
+     * format reported by android.scaler.availableStreamConfigurations. The
+     * supported input/output stream combinations depends the camera device
+     * capabilities, see android.scaler.availableInputOutputFormatsMap for
+     * stream map details.
+     *
+     * This kind of stream is generally used to reprocess data into higher
+     * quality images (that otherwise would cause a frame rate performance
+     * loss), or to do off-line reprocessing.
+     *
+     * The typical use cases are OPAQUE (typically ZSL) and YUV reprocessing,
+     * see S8.2, S8.3 and S10 for more details.
+     */
+    INPUT = 1,
+}
diff --git a/camera/metadata/3.8/types.hal b/camera/metadata/3.8/types.hal
index 4c70eb9..488bf9d 100644
--- a/camera/metadata/3.8/types.hal
+++ b/camera/metadata/3.8/types.hal
@@ -68,6 +68,14 @@
 
     ANDROID_REQUEST_END_3_8,
 
+    /** android.scaler.availableStreamUseCases [static, enum[], public]
+     *
+     * <p>The stream use cases supported by this camera device.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES = android.hardware.camera.metadata@3.6::CameraMetadataTag:ANDROID_SCALER_END_3_6,
+
+    ANDROID_SCALER_END_3_8,
+
 };
 
 /*
@@ -88,6 +96,7 @@
 enum CameraMetadataEnumAndroidRequestAvailableCapabilities :
         @3.6::CameraMetadataEnumAndroidRequestAvailableCapabilities {
     ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DYNAMIC_RANGE_TEN_BIT,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_STREAM_USE_CASE,
 };
 
 /** android.request.availableDynamicRangeProfilesMap enumeration values
@@ -129,3 +138,17 @@
     ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_PUBLIC_END_3_8
                                                                  = 0x9,
 };
+
+/** android.scaler.availableStreamUseCases enumeration values
+ * @see ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES
+ */
+enum CameraMetadataEnumAndroidScalerAvailableStreamUseCases : uint32_t {
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT           = 0x0,
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW           = 0x1,
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_STILL_CAPTURE     = 0x2,
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_RECORD      = 0x3,
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW_VIDEO_STILL
+                                                                 = 0x4,
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_CALL        = 0x5,
+    ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VENDOR_START      = 0x10000,
+};
diff --git a/camera/metadata/aidl/Android.bp b/camera/metadata/aidl/Android.bp
new file mode 100644
index 0000000..05f280c
--- /dev/null
+++ b/camera/metadata/aidl/Android.bp
@@ -0,0 +1,19 @@
+aidl_interface {
+    name: "android.hardware.camera.metadata",
+    vendor_available: true,
+    srcs: ["android/hardware/camera/metadata/*.aidl"],
+    stability: "vintf",
+    backend: {
+        cpp: {
+            enabled: false,
+        },
+        java: {
+            enabled: false,
+        },
+        ndk: {
+            vndk: {
+                enabled: true,
+            },
+        },
+    },
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/BlackLevelLock.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/BlackLevelLock.aidl
new file mode 100644
index 0000000..dcefa2f
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/BlackLevelLock.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum BlackLevelLock {
+  ANDROID_BLACK_LEVEL_LOCK_OFF = 0,
+  ANDROID_BLACK_LEVEL_LOCK_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataSection.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataSection.aidl
new file mode 100644
index 0000000..dc33836
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataSection.aidl
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum CameraMetadataSection {
+  ANDROID_COLOR_CORRECTION = 0,
+  ANDROID_CONTROL = 1,
+  ANDROID_DEMOSAIC = 2,
+  ANDROID_EDGE = 3,
+  ANDROID_FLASH = 4,
+  ANDROID_FLASH_INFO = 5,
+  ANDROID_HOT_PIXEL = 6,
+  ANDROID_JPEG = 7,
+  ANDROID_LENS = 8,
+  ANDROID_LENS_INFO = 9,
+  ANDROID_NOISE_REDUCTION = 10,
+  ANDROID_QUIRKS = 11,
+  ANDROID_REQUEST = 12,
+  ANDROID_SCALER = 13,
+  ANDROID_SENSOR = 14,
+  ANDROID_SENSOR_INFO = 15,
+  ANDROID_SHADING = 16,
+  ANDROID_STATISTICS = 17,
+  ANDROID_STATISTICS_INFO = 18,
+  ANDROID_TONEMAP = 19,
+  ANDROID_LED = 20,
+  ANDROID_INFO = 21,
+  ANDROID_BLACK_LEVEL = 22,
+  ANDROID_SYNC = 23,
+  ANDROID_REPROCESS = 24,
+  ANDROID_DEPTH = 25,
+  ANDROID_LOGICAL_MULTI_CAMERA = 26,
+  ANDROID_DISTORTION_CORRECTION = 27,
+  ANDROID_HEIC = 28,
+  ANDROID_HEIC_INFO = 29,
+  VENDOR_SECTION = 32768,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataSectionStart.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataSectionStart.aidl
new file mode 100644
index 0000000..0c355c8
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataSectionStart.aidl
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum CameraMetadataSectionStart {
+  ANDROID_COLOR_CORRECTION_START = 0,
+  ANDROID_CONTROL_START = 65536,
+  ANDROID_DEMOSAIC_START = 131072,
+  ANDROID_EDGE_START = 196608,
+  ANDROID_FLASH_START = 262144,
+  ANDROID_FLASH_INFO_START = 327680,
+  ANDROID_HOT_PIXEL_START = 393216,
+  ANDROID_JPEG_START = 458752,
+  ANDROID_LENS_START = 524288,
+  ANDROID_LENS_INFO_START = 589824,
+  ANDROID_NOISE_REDUCTION_START = 655360,
+  ANDROID_QUIRKS_START = 720896,
+  ANDROID_REQUEST_START = 786432,
+  ANDROID_SCALER_START = 851968,
+  ANDROID_SENSOR_START = 917504,
+  ANDROID_SENSOR_INFO_START = 983040,
+  ANDROID_SHADING_START = 1048576,
+  ANDROID_STATISTICS_START = 1114112,
+  ANDROID_STATISTICS_INFO_START = 1179648,
+  ANDROID_TONEMAP_START = 1245184,
+  ANDROID_LED_START = 1310720,
+  ANDROID_INFO_START = 1376256,
+  ANDROID_BLACK_LEVEL_START = 1441792,
+  ANDROID_SYNC_START = 1507328,
+  ANDROID_REPROCESS_START = 1572864,
+  ANDROID_DEPTH_START = 1638400,
+  VENDOR_SECTION_START = -2147483648,
+  ANDROID_LOGICAL_MULTI_CAMERA_START = 1703936,
+  ANDROID_DISTORTION_CORRECTION_START = 1769472,
+  ANDROID_HEIC_START = 1835008,
+  ANDROID_HEIC_INFO_START = 1900544,
+  VENDOR_SECTION_START = -2147483648,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataTag.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataTag.aidl
new file mode 100644
index 0000000..34a1211
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/CameraMetadataTag.aidl
@@ -0,0 +1,327 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum CameraMetadataTag {
+  ANDROID_COLOR_CORRECTION_MODE = 0,
+  ANDROID_COLOR_CORRECTION_TRANSFORM = 1,
+  ANDROID_COLOR_CORRECTION_GAINS = 2,
+  ANDROID_COLOR_CORRECTION_ABERRATION_MODE = 3,
+  ANDROID_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES = 4,
+  ANDROID_CONTROL_AE_ANTIBANDING_MODE = 65536,
+  ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION = 65537,
+  ANDROID_CONTROL_AE_LOCK = 65538,
+  ANDROID_CONTROL_AE_MODE = 65539,
+  ANDROID_CONTROL_AE_REGIONS = 65540,
+  ANDROID_CONTROL_AE_TARGET_FPS_RANGE = 65541,
+  ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER = 65542,
+  ANDROID_CONTROL_AF_MODE = 65543,
+  ANDROID_CONTROL_AF_REGIONS = 65544,
+  ANDROID_CONTROL_AF_TRIGGER = 65545,
+  ANDROID_CONTROL_AWB_LOCK = 65546,
+  ANDROID_CONTROL_AWB_MODE = 65547,
+  ANDROID_CONTROL_AWB_REGIONS = 65548,
+  ANDROID_CONTROL_CAPTURE_INTENT = 65549,
+  ANDROID_CONTROL_EFFECT_MODE = 65550,
+  ANDROID_CONTROL_MODE = 65551,
+  ANDROID_CONTROL_SCENE_MODE = 65552,
+  ANDROID_CONTROL_VIDEO_STABILIZATION_MODE = 65553,
+  ANDROID_CONTROL_AE_AVAILABLE_ANTIBANDING_MODES = 65554,
+  ANDROID_CONTROL_AE_AVAILABLE_MODES = 65555,
+  ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES = 65556,
+  ANDROID_CONTROL_AE_COMPENSATION_RANGE = 65557,
+  ANDROID_CONTROL_AE_COMPENSATION_STEP = 65558,
+  ANDROID_CONTROL_AF_AVAILABLE_MODES = 65559,
+  ANDROID_CONTROL_AVAILABLE_EFFECTS = 65560,
+  ANDROID_CONTROL_AVAILABLE_SCENE_MODES = 65561,
+  ANDROID_CONTROL_AVAILABLE_VIDEO_STABILIZATION_MODES = 65562,
+  ANDROID_CONTROL_AWB_AVAILABLE_MODES = 65563,
+  ANDROID_CONTROL_MAX_REGIONS = 65564,
+  ANDROID_CONTROL_SCENE_MODE_OVERRIDES = 65565,
+  ANDROID_CONTROL_AE_PRECAPTURE_ID = 65566,
+  ANDROID_CONTROL_AE_STATE = 65567,
+  ANDROID_CONTROL_AF_STATE = 65568,
+  ANDROID_CONTROL_AF_TRIGGER_ID = 65569,
+  ANDROID_CONTROL_AWB_STATE = 65570,
+  ANDROID_CONTROL_AVAILABLE_HIGH_SPEED_VIDEO_CONFIGURATIONS = 65571,
+  ANDROID_CONTROL_AE_LOCK_AVAILABLE = 65572,
+  ANDROID_CONTROL_AWB_LOCK_AVAILABLE = 65573,
+  ANDROID_CONTROL_AVAILABLE_MODES = 65574,
+  ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE = 65575,
+  ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST = 65576,
+  ANDROID_CONTROL_ENABLE_ZSL = 65577,
+  ANDROID_CONTROL_AF_SCENE_CHANGE = 65578,
+  ANDROID_CONTROL_AVAILABLE_EXTENDED_SCENE_MODE_MAX_SIZES = 65579,
+  ANDROID_CONTROL_AVAILABLE_EXTENDED_SCENE_MODE_ZOOM_RATIO_RANGES = 65580,
+  ANDROID_CONTROL_EXTENDED_SCENE_MODE = 65581,
+  ANDROID_CONTROL_ZOOM_RATIO_RANGE = 65582,
+  ANDROID_CONTROL_ZOOM_RATIO = 65583,
+  ANDROID_CONTROL_AVAILABLE_HIGH_SPEED_VIDEO_CONFIGURATIONS_MAXIMUM_RESOLUTION = 65584,
+  ANDROID_DEMOSAIC_MODE = 131072,
+  ANDROID_EDGE_MODE = 196608,
+  ANDROID_EDGE_STRENGTH = 196609,
+  ANDROID_EDGE_AVAILABLE_EDGE_MODES = 196610,
+  ANDROID_FLASH_FIRING_POWER = 262144,
+  ANDROID_FLASH_FIRING_TIME = 262145,
+  ANDROID_FLASH_MODE = 262146,
+  ANDROID_FLASH_COLOR_TEMPERATURE = 262147,
+  ANDROID_FLASH_MAX_ENERGY = 262148,
+  ANDROID_FLASH_STATE = 262149,
+  ANDROID_FLASH_INFO_AVAILABLE = 327680,
+  ANDROID_FLASH_INFO_CHARGE_DURATION = 327681,
+  ANDROID_FLASH_INFO_STRENGTH_MAXIMUM_LEVEL = 327682,
+  ANDROID_FLASH_INFO_STRENGTH_DEFAULT_LEVEL = 327683,
+  ANDROID_HOT_PIXEL_MODE = 393216,
+  ANDROID_HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES = 393217,
+  ANDROID_JPEG_GPS_COORDINATES = 458752,
+  ANDROID_JPEG_GPS_PROCESSING_METHOD = 458753,
+  ANDROID_JPEG_GPS_TIMESTAMP = 458754,
+  ANDROID_JPEG_ORIENTATION = 458755,
+  ANDROID_JPEG_QUALITY = 458756,
+  ANDROID_JPEG_THUMBNAIL_QUALITY = 458757,
+  ANDROID_JPEG_THUMBNAIL_SIZE = 458758,
+  ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES = 458759,
+  ANDROID_JPEG_MAX_SIZE = 458760,
+  ANDROID_JPEG_SIZE = 458761,
+  ANDROID_LENS_APERTURE = 524288,
+  ANDROID_LENS_FILTER_DENSITY = 524289,
+  ANDROID_LENS_FOCAL_LENGTH = 524290,
+  ANDROID_LENS_FOCUS_DISTANCE = 524291,
+  ANDROID_LENS_OPTICAL_STABILIZATION_MODE = 524292,
+  ANDROID_LENS_FACING = 524293,
+  ANDROID_LENS_POSE_ROTATION = 524294,
+  ANDROID_LENS_POSE_TRANSLATION = 524295,
+  ANDROID_LENS_FOCUS_RANGE = 524296,
+  ANDROID_LENS_STATE = 524297,
+  ANDROID_LENS_INTRINSIC_CALIBRATION = 524298,
+  ANDROID_LENS_RADIAL_DISTORTION = 524299,
+  ANDROID_LENS_POSE_REFERENCE = 524300,
+  ANDROID_LENS_DISTORTION = 524301,
+  ANDROID_LENS_DISTORTION_MAXIMUM_RESOLUTION = 524302,
+  ANDROID_LENS_INTRINSIC_CALIBRATION_MAXIMUM_RESOLUTION = 524303,
+  ANDROID_LENS_INFO_AVAILABLE_APERTURES = 589824,
+  ANDROID_LENS_INFO_AVAILABLE_FILTER_DENSITIES = 589825,
+  ANDROID_LENS_INFO_AVAILABLE_FOCAL_LENGTHS = 589826,
+  ANDROID_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION = 589827,
+  ANDROID_LENS_INFO_HYPERFOCAL_DISTANCE = 589828,
+  ANDROID_LENS_INFO_MINIMUM_FOCUS_DISTANCE = 589829,
+  ANDROID_LENS_INFO_SHADING_MAP_SIZE = 589830,
+  ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION = 589831,
+  ANDROID_NOISE_REDUCTION_MODE = 655360,
+  ANDROID_NOISE_REDUCTION_STRENGTH = 655361,
+  ANDROID_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES = 655362,
+  ANDROID_QUIRKS_METERING_CROP_REGION = 720896,
+  ANDROID_QUIRKS_TRIGGER_AF_WITH_AUTO = 720897,
+  ANDROID_QUIRKS_USE_ZSL_FORMAT = 720898,
+  ANDROID_QUIRKS_USE_PARTIAL_RESULT = 720899,
+  ANDROID_QUIRKS_PARTIAL_RESULT = 720900,
+  ANDROID_REQUEST_FRAME_COUNT = 786432,
+  ANDROID_REQUEST_ID = 786433,
+  ANDROID_REQUEST_INPUT_STREAMS = 786434,
+  ANDROID_REQUEST_METADATA_MODE = 786435,
+  ANDROID_REQUEST_OUTPUT_STREAMS = 786436,
+  ANDROID_REQUEST_TYPE = 786437,
+  ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS = 786438,
+  ANDROID_REQUEST_MAX_NUM_REPROCESS_STREAMS = 786439,
+  ANDROID_REQUEST_MAX_NUM_INPUT_STREAMS = 786440,
+  ANDROID_REQUEST_PIPELINE_DEPTH = 786441,
+  ANDROID_REQUEST_PIPELINE_MAX_DEPTH = 786442,
+  ANDROID_REQUEST_PARTIAL_RESULT_COUNT = 786443,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES = 786444,
+  ANDROID_REQUEST_AVAILABLE_REQUEST_KEYS = 786445,
+  ANDROID_REQUEST_AVAILABLE_RESULT_KEYS = 786446,
+  ANDROID_REQUEST_AVAILABLE_CHARACTERISTICS_KEYS = 786447,
+  ANDROID_REQUEST_AVAILABLE_SESSION_KEYS = 786448,
+  ANDROID_REQUEST_AVAILABLE_PHYSICAL_CAMERA_REQUEST_KEYS = 786449,
+  ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION = 786450,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP = 786451,
+  ANDROID_REQUEST_RECOMMENDED_TEN_BIT_DYNAMIC_RANGE_PROFILE = 786452,
+  ANDROID_SCALER_CROP_REGION = 851968,
+  ANDROID_SCALER_AVAILABLE_FORMATS = 851969,
+  ANDROID_SCALER_AVAILABLE_JPEG_MIN_DURATIONS = 851970,
+  ANDROID_SCALER_AVAILABLE_JPEG_SIZES = 851971,
+  ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM = 851972,
+  ANDROID_SCALER_AVAILABLE_PROCESSED_MIN_DURATIONS = 851973,
+  ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES = 851974,
+  ANDROID_SCALER_AVAILABLE_RAW_MIN_DURATIONS = 851975,
+  ANDROID_SCALER_AVAILABLE_RAW_SIZES = 851976,
+  ANDROID_SCALER_AVAILABLE_INPUT_OUTPUT_FORMATS_MAP = 851977,
+  ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS = 851978,
+  ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS = 851979,
+  ANDROID_SCALER_AVAILABLE_STALL_DURATIONS = 851980,
+  ANDROID_SCALER_CROPPING_TYPE = 851981,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS = 851982,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_INPUT_OUTPUT_FORMATS_MAP = 851983,
+  ANDROID_SCALER_AVAILABLE_ROTATE_AND_CROP_MODES = 851984,
+  ANDROID_SCALER_DEFAULT_SECURE_IMAGE_SIZE = 851985,
+  ANDROID_SCALER_PHYSICAL_CAMERA_MULTI_RESOLUTION_STREAM_CONFIGURATIONS = 851986,
+  ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION = 851987,
+  ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION = 851988,
+  ANDROID_SCALER_AVAILABLE_STALL_DURATIONS_MAXIMUM_RESOLUTION = 851989,
+  ANDROID_SCALER_AVAILABLE_INPUT_OUTPUT_FORMATS_MAP_MAXIMUM_RESOLUTION = 851990,
+  ANDROID_SCALER_MULTI_RESOLUTION_STREAM_SUPPORTED = 851991,
+  ANDROID_SENSOR_EXPOSURE_TIME = 917504,
+  ANDROID_SENSOR_FRAME_DURATION = 917505,
+  ANDROID_SENSOR_SENSITIVITY = 917506,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1 = 917507,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT2 = 917508,
+  ANDROID_SENSOR_CALIBRATION_TRANSFORM1 = 917509,
+  ANDROID_SENSOR_CALIBRATION_TRANSFORM2 = 917510,
+  ANDROID_SENSOR_COLOR_TRANSFORM1 = 917511,
+  ANDROID_SENSOR_COLOR_TRANSFORM2 = 917512,
+  ANDROID_SENSOR_FORWARD_MATRIX1 = 917513,
+  ANDROID_SENSOR_FORWARD_MATRIX2 = 917514,
+  ANDROID_SENSOR_BASE_GAIN_FACTOR = 917515,
+  ANDROID_SENSOR_BLACK_LEVEL_PATTERN = 917516,
+  ANDROID_SENSOR_MAX_ANALOG_SENSITIVITY = 917517,
+  ANDROID_SENSOR_ORIENTATION = 917518,
+  ANDROID_SENSOR_PROFILE_HUE_SAT_MAP_DIMENSIONS = 917519,
+  ANDROID_SENSOR_TIMESTAMP = 917520,
+  ANDROID_SENSOR_TEMPERATURE = 917521,
+  ANDROID_SENSOR_NEUTRAL_COLOR_POINT = 917522,
+  ANDROID_SENSOR_NOISE_PROFILE = 917523,
+  ANDROID_SENSOR_PROFILE_HUE_SAT_MAP = 917524,
+  ANDROID_SENSOR_PROFILE_TONE_CURVE = 917525,
+  ANDROID_SENSOR_GREEN_SPLIT = 917526,
+  ANDROID_SENSOR_TEST_PATTERN_DATA = 917527,
+  ANDROID_SENSOR_TEST_PATTERN_MODE = 917528,
+  ANDROID_SENSOR_AVAILABLE_TEST_PATTERN_MODES = 917529,
+  ANDROID_SENSOR_ROLLING_SHUTTER_SKEW = 917530,
+  ANDROID_SENSOR_OPTICAL_BLACK_REGIONS = 917531,
+  ANDROID_SENSOR_DYNAMIC_BLACK_LEVEL = 917532,
+  ANDROID_SENSOR_DYNAMIC_WHITE_LEVEL = 917533,
+  ANDROID_SENSOR_OPAQUE_RAW_SIZE = 917534,
+  ANDROID_SENSOR_OPAQUE_RAW_SIZE_MAXIMUM_RESOLUTION = 917535,
+  ANDROID_SENSOR_PIXEL_MODE = 917536,
+  ANDROID_SENSOR_RAW_BINNING_FACTOR_USED = 917537,
+  ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE = 983040,
+  ANDROID_SENSOR_INFO_SENSITIVITY_RANGE = 983041,
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT = 983042,
+  ANDROID_SENSOR_INFO_EXPOSURE_TIME_RANGE = 983043,
+  ANDROID_SENSOR_INFO_MAX_FRAME_DURATION = 983044,
+  ANDROID_SENSOR_INFO_PHYSICAL_SIZE = 983045,
+  ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE = 983046,
+  ANDROID_SENSOR_INFO_WHITE_LEVEL = 983047,
+  ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE = 983048,
+  ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED = 983049,
+  ANDROID_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE = 983050,
+  ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE_MAXIMUM_RESOLUTION = 983051,
+  ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE_MAXIMUM_RESOLUTION = 983052,
+  ANDROID_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE_MAXIMUM_RESOLUTION = 983053,
+  ANDROID_SENSOR_INFO_BINNING_FACTOR = 983054,
+  ANDROID_SHADING_MODE = 1048576,
+  ANDROID_SHADING_STRENGTH = 1048577,
+  ANDROID_SHADING_AVAILABLE_MODES = 1048578,
+  ANDROID_STATISTICS_FACE_DETECT_MODE = 1114112,
+  ANDROID_STATISTICS_HISTOGRAM_MODE = 1114113,
+  ANDROID_STATISTICS_SHARPNESS_MAP_MODE = 1114114,
+  ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE = 1114115,
+  ANDROID_STATISTICS_FACE_IDS = 1114116,
+  ANDROID_STATISTICS_FACE_LANDMARKS = 1114117,
+  ANDROID_STATISTICS_FACE_RECTANGLES = 1114118,
+  ANDROID_STATISTICS_FACE_SCORES = 1114119,
+  ANDROID_STATISTICS_HISTOGRAM = 1114120,
+  ANDROID_STATISTICS_SHARPNESS_MAP = 1114121,
+  ANDROID_STATISTICS_LENS_SHADING_CORRECTION_MAP = 1114122,
+  ANDROID_STATISTICS_LENS_SHADING_MAP = 1114123,
+  ANDROID_STATISTICS_PREDICTED_COLOR_GAINS = 1114124,
+  ANDROID_STATISTICS_PREDICTED_COLOR_TRANSFORM = 1114125,
+  ANDROID_STATISTICS_SCENE_FLICKER = 1114126,
+  ANDROID_STATISTICS_HOT_PIXEL_MAP = 1114127,
+  ANDROID_STATISTICS_LENS_SHADING_MAP_MODE = 1114128,
+  ANDROID_STATISTICS_OIS_DATA_MODE = 1114129,
+  ANDROID_STATISTICS_OIS_TIMESTAMPS = 1114130,
+  ANDROID_STATISTICS_OIS_X_SHIFTS = 1114131,
+  ANDROID_STATISTICS_OIS_Y_SHIFTS = 1114132,
+  ANDROID_STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES = 1179648,
+  ANDROID_STATISTICS_INFO_HISTOGRAM_BUCKET_COUNT = 1179649,
+  ANDROID_STATISTICS_INFO_MAX_FACE_COUNT = 1179650,
+  ANDROID_STATISTICS_INFO_MAX_HISTOGRAM_COUNT = 1179651,
+  ANDROID_STATISTICS_INFO_MAX_SHARPNESS_MAP_VALUE = 1179652,
+  ANDROID_STATISTICS_INFO_SHARPNESS_MAP_SIZE = 1179653,
+  ANDROID_STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES = 1179654,
+  ANDROID_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES = 1179655,
+  ANDROID_STATISTICS_INFO_AVAILABLE_OIS_DATA_MODES = 1179656,
+  ANDROID_TONEMAP_CURVE_BLUE = 1245184,
+  ANDROID_TONEMAP_CURVE_GREEN = 1245185,
+  ANDROID_TONEMAP_CURVE_RED = 1245186,
+  ANDROID_TONEMAP_MODE = 1245187,
+  ANDROID_TONEMAP_MAX_CURVE_POINTS = 1245188,
+  ANDROID_TONEMAP_AVAILABLE_TONE_MAP_MODES = 1245189,
+  ANDROID_TONEMAP_GAMMA = 1245190,
+  ANDROID_TONEMAP_PRESET_CURVE = 1245191,
+  ANDROID_LED_TRANSMIT = 1310720,
+  ANDROID_LED_AVAILABLE_LEDS = 1310721,
+  ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL = 1376256,
+  ANDROID_INFO_VERSION = 1376257,
+  ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION = 1376258,
+  ANDROID_INFO_DEVICE_STATE_ORIENTATIONS = 1376259,
+  ANDROID_BLACK_LEVEL_LOCK = 1441792,
+  ANDROID_SYNC_FRAME_NUMBER = 1507328,
+  ANDROID_SYNC_MAX_LATENCY = 1507329,
+  ANDROID_REPROCESS_EFFECTIVE_EXPOSURE_FACTOR = 1572864,
+  ANDROID_REPROCESS_MAX_CAPTURE_STALL = 1572865,
+  ANDROID_DEPTH_MAX_DEPTH_SAMPLES = 1638400,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS = 1638401,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_MIN_FRAME_DURATIONS = 1638402,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS = 1638403,
+  ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE = 1638404,
+  ANDROID_DEPTH_AVAILABLE_RECOMMENDED_DEPTH_STREAM_CONFIGURATIONS = 1638405,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS = 1638406,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_MIN_FRAME_DURATIONS = 1638407,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STALL_DURATIONS = 1638408,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION = 1638409,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION = 1638410,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS_MAXIMUM_RESOLUTION = 1638411,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION = 1638412,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION = 1638413,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STALL_DURATIONS_MAXIMUM_RESOLUTION = 1638414,
+  ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS = 1703936,
+  ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE = 1703937,
+  ANDROID_LOGICAL_MULTI_CAMERA_ACTIVE_PHYSICAL_ID = 1703938,
+  ANDROID_DISTORTION_CORRECTION_MODE = 1769472,
+  ANDROID_DISTORTION_CORRECTION_AVAILABLE_MODES = 1769473,
+  ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS = 1835008,
+  ANDROID_HEIC_AVAILABLE_HEIC_MIN_FRAME_DURATIONS = 1835009,
+  ANDROID_HEIC_AVAILABLE_HEIC_STALL_DURATIONS = 1835010,
+  ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION = 1835011,
+  ANDROID_HEIC_AVAILABLE_HEIC_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION = 1835012,
+  ANDROID_HEIC_AVAILABLE_HEIC_STALL_DURATIONS_MAXIMUM_RESOLUTION = 1835013,
+  ANDROID_HEIC_INFO_SUPPORTED = 1900544,
+  ANDROID_HEIC_INFO_MAX_JPEG_APP_SEGMENTS_COUNT = 1900545,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ColorCorrectionAberrationMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ColorCorrectionAberrationMode.aidl
new file mode 100644
index 0000000..d04ffe3
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ColorCorrectionAberrationMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ColorCorrectionAberrationMode {
+  ANDROID_COLOR_CORRECTION_ABERRATION_MODE_OFF = 0,
+  ANDROID_COLOR_CORRECTION_ABERRATION_MODE_FAST = 1,
+  ANDROID_COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ColorCorrectionMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ColorCorrectionMode.aidl
new file mode 100644
index 0000000..219c802
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ColorCorrectionMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ColorCorrectionMode {
+  ANDROID_COLOR_CORRECTION_MODE_TRANSFORM_MATRIX = 0,
+  ANDROID_COLOR_CORRECTION_MODE_FAST = 1,
+  ANDROID_COLOR_CORRECTION_MODE_HIGH_QUALITY = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeAntibandingMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeAntibandingMode.aidl
new file mode 100644
index 0000000..84fd718
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeAntibandingMode.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAeAntibandingMode {
+  ANDROID_CONTROL_AE_ANTIBANDING_MODE_OFF = 0,
+  ANDROID_CONTROL_AE_ANTIBANDING_MODE_50HZ = 1,
+  ANDROID_CONTROL_AE_ANTIBANDING_MODE_60HZ = 2,
+  ANDROID_CONTROL_AE_ANTIBANDING_MODE_AUTO = 3,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeLock.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeLock.aidl
new file mode 100644
index 0000000..f825f11
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeLock.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAeLock {
+  ANDROID_CONTROL_AE_LOCK_OFF = 0,
+  ANDROID_CONTROL_AE_LOCK_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeLockAvailable.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeLockAvailable.aidl
new file mode 100644
index 0000000..df7924e
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeLockAvailable.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAeLockAvailable {
+  ANDROID_CONTROL_AE_LOCK_AVAILABLE_FALSE = 0,
+  ANDROID_CONTROL_AE_LOCK_AVAILABLE_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeMode.aidl
new file mode 100644
index 0000000..75a3486
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeMode.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAeMode {
+  ANDROID_CONTROL_AE_MODE_OFF = 0,
+  ANDROID_CONTROL_AE_MODE_ON = 1,
+  ANDROID_CONTROL_AE_MODE_ON_AUTO_FLASH = 2,
+  ANDROID_CONTROL_AE_MODE_ON_ALWAYS_FLASH = 3,
+  ANDROID_CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE = 4,
+  ANDROID_CONTROL_AE_MODE_ON_EXTERNAL_FLASH = 5,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAePrecaptureTrigger.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAePrecaptureTrigger.aidl
new file mode 100644
index 0000000..4678e01
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAePrecaptureTrigger.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAePrecaptureTrigger {
+  ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_IDLE = 0,
+  ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_START = 1,
+  ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeState.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeState.aidl
new file mode 100644
index 0000000..3be64ea
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAeState.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAeState {
+  ANDROID_CONTROL_AE_STATE_INACTIVE = 0,
+  ANDROID_CONTROL_AE_STATE_SEARCHING = 1,
+  ANDROID_CONTROL_AE_STATE_CONVERGED = 2,
+  ANDROID_CONTROL_AE_STATE_LOCKED = 3,
+  ANDROID_CONTROL_AE_STATE_FLASH_REQUIRED = 4,
+  ANDROID_CONTROL_AE_STATE_PRECAPTURE = 5,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfMode.aidl
new file mode 100644
index 0000000..155d3c9
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfMode.aidl
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAfMode {
+  ANDROID_CONTROL_AF_MODE_OFF = 0,
+  ANDROID_CONTROL_AF_MODE_AUTO = 1,
+  ANDROID_CONTROL_AF_MODE_MACRO = 2,
+  ANDROID_CONTROL_AF_MODE_CONTINUOUS_VIDEO = 3,
+  ANDROID_CONTROL_AF_MODE_CONTINUOUS_PICTURE = 4,
+  ANDROID_CONTROL_AF_MODE_EDOF = 5,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfSceneChange.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfSceneChange.aidl
new file mode 100644
index 0000000..4b31c84
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfSceneChange.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAfSceneChange {
+  ANDROID_CONTROL_AF_SCENE_CHANGE_NOT_DETECTED = 0,
+  ANDROID_CONTROL_AF_SCENE_CHANGE_DETECTED = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfState.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfState.aidl
new file mode 100644
index 0000000..4aac8c8
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfState.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAfState {
+  ANDROID_CONTROL_AF_STATE_INACTIVE = 0,
+  ANDROID_CONTROL_AF_STATE_PASSIVE_SCAN = 1,
+  ANDROID_CONTROL_AF_STATE_PASSIVE_FOCUSED = 2,
+  ANDROID_CONTROL_AF_STATE_ACTIVE_SCAN = 3,
+  ANDROID_CONTROL_AF_STATE_FOCUSED_LOCKED = 4,
+  ANDROID_CONTROL_AF_STATE_NOT_FOCUSED_LOCKED = 5,
+  ANDROID_CONTROL_AF_STATE_PASSIVE_UNFOCUSED = 6,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfTrigger.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfTrigger.aidl
new file mode 100644
index 0000000..3fbf94b
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAfTrigger.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAfTrigger {
+  ANDROID_CONTROL_AF_TRIGGER_IDLE = 0,
+  ANDROID_CONTROL_AF_TRIGGER_START = 1,
+  ANDROID_CONTROL_AF_TRIGGER_CANCEL = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbLock.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbLock.aidl
new file mode 100644
index 0000000..0e297a5
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbLock.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAwbLock {
+  ANDROID_CONTROL_AWB_LOCK_OFF = 0,
+  ANDROID_CONTROL_AWB_LOCK_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbLockAvailable.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbLockAvailable.aidl
new file mode 100644
index 0000000..d471d19
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbLockAvailable.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAwbLockAvailable {
+  ANDROID_CONTROL_AWB_LOCK_AVAILABLE_FALSE = 0,
+  ANDROID_CONTROL_AWB_LOCK_AVAILABLE_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbMode.aidl
new file mode 100644
index 0000000..a3463f8
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbMode.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAwbMode {
+  ANDROID_CONTROL_AWB_MODE_OFF = 0,
+  ANDROID_CONTROL_AWB_MODE_AUTO = 1,
+  ANDROID_CONTROL_AWB_MODE_INCANDESCENT = 2,
+  ANDROID_CONTROL_AWB_MODE_FLUORESCENT = 3,
+  ANDROID_CONTROL_AWB_MODE_WARM_FLUORESCENT = 4,
+  ANDROID_CONTROL_AWB_MODE_DAYLIGHT = 5,
+  ANDROID_CONTROL_AWB_MODE_CLOUDY_DAYLIGHT = 6,
+  ANDROID_CONTROL_AWB_MODE_TWILIGHT = 7,
+  ANDROID_CONTROL_AWB_MODE_SHADE = 8,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbState.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbState.aidl
new file mode 100644
index 0000000..f1b0e40
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlAwbState.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlAwbState {
+  ANDROID_CONTROL_AWB_STATE_INACTIVE = 0,
+  ANDROID_CONTROL_AWB_STATE_SEARCHING = 1,
+  ANDROID_CONTROL_AWB_STATE_CONVERGED = 2,
+  ANDROID_CONTROL_AWB_STATE_LOCKED = 3,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlCaptureIntent.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlCaptureIntent.aidl
new file mode 100644
index 0000000..283bb1b
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlCaptureIntent.aidl
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlCaptureIntent {
+  ANDROID_CONTROL_CAPTURE_INTENT_CUSTOM = 0,
+  ANDROID_CONTROL_CAPTURE_INTENT_PREVIEW = 1,
+  ANDROID_CONTROL_CAPTURE_INTENT_STILL_CAPTURE = 2,
+  ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_RECORD = 3,
+  ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT = 4,
+  ANDROID_CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG = 5,
+  ANDROID_CONTROL_CAPTURE_INTENT_MANUAL = 6,
+  ANDROID_CONTROL_CAPTURE_INTENT_MOTION_TRACKING = 7,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlEffectMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlEffectMode.aidl
new file mode 100644
index 0000000..911223d
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlEffectMode.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlEffectMode {
+  ANDROID_CONTROL_EFFECT_MODE_OFF = 0,
+  ANDROID_CONTROL_EFFECT_MODE_MONO = 1,
+  ANDROID_CONTROL_EFFECT_MODE_NEGATIVE = 2,
+  ANDROID_CONTROL_EFFECT_MODE_SOLARIZE = 3,
+  ANDROID_CONTROL_EFFECT_MODE_SEPIA = 4,
+  ANDROID_CONTROL_EFFECT_MODE_POSTERIZE = 5,
+  ANDROID_CONTROL_EFFECT_MODE_WHITEBOARD = 6,
+  ANDROID_CONTROL_EFFECT_MODE_BLACKBOARD = 7,
+  ANDROID_CONTROL_EFFECT_MODE_AQUA = 8,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlEnableZsl.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlEnableZsl.aidl
new file mode 100644
index 0000000..920def7
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlEnableZsl.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlEnableZsl {
+  ANDROID_CONTROL_ENABLE_ZSL_FALSE = 0,
+  ANDROID_CONTROL_ENABLE_ZSL_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlExtendedSceneMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlExtendedSceneMode.aidl
new file mode 100644
index 0000000..2655d61
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlExtendedSceneMode.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlExtendedSceneMode {
+  ANDROID_CONTROL_EXTENDED_SCENE_MODE_DISABLED = 0,
+  ANDROID_CONTROL_EXTENDED_SCENE_MODE_BOKEH_STILL_CAPTURE = 1,
+  ANDROID_CONTROL_EXTENDED_SCENE_MODE_BOKEH_CONTINUOUS = 2,
+  ANDROID_CONTROL_EXTENDED_SCENE_MODE_VENDOR_START = 64,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlMode.aidl
new file mode 100644
index 0000000..f58491e
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlMode.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlMode {
+  ANDROID_CONTROL_MODE_OFF = 0,
+  ANDROID_CONTROL_MODE_AUTO = 1,
+  ANDROID_CONTROL_MODE_USE_SCENE_MODE = 2,
+  ANDROID_CONTROL_MODE_OFF_KEEP_STATE = 3,
+  ANDROID_CONTROL_MODE_USE_EXTENDED_SCENE_MODE = 4,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlSceneMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlSceneMode.aidl
new file mode 100644
index 0000000..994bbf3
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlSceneMode.aidl
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlSceneMode {
+  ANDROID_CONTROL_SCENE_MODE_DISABLED = 0,
+  ANDROID_CONTROL_SCENE_MODE_FACE_PRIORITY = 1,
+  ANDROID_CONTROL_SCENE_MODE_ACTION = 2,
+  ANDROID_CONTROL_SCENE_MODE_PORTRAIT = 3,
+  ANDROID_CONTROL_SCENE_MODE_LANDSCAPE = 4,
+  ANDROID_CONTROL_SCENE_MODE_NIGHT = 5,
+  ANDROID_CONTROL_SCENE_MODE_NIGHT_PORTRAIT = 6,
+  ANDROID_CONTROL_SCENE_MODE_THEATRE = 7,
+  ANDROID_CONTROL_SCENE_MODE_BEACH = 8,
+  ANDROID_CONTROL_SCENE_MODE_SNOW = 9,
+  ANDROID_CONTROL_SCENE_MODE_SUNSET = 10,
+  ANDROID_CONTROL_SCENE_MODE_STEADYPHOTO = 11,
+  ANDROID_CONTROL_SCENE_MODE_FIREWORKS = 12,
+  ANDROID_CONTROL_SCENE_MODE_SPORTS = 13,
+  ANDROID_CONTROL_SCENE_MODE_PARTY = 14,
+  ANDROID_CONTROL_SCENE_MODE_CANDLELIGHT = 15,
+  ANDROID_CONTROL_SCENE_MODE_BARCODE = 16,
+  ANDROID_CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO = 17,
+  ANDROID_CONTROL_SCENE_MODE_HDR = 18,
+  ANDROID_CONTROL_SCENE_MODE_FACE_PRIORITY_LOW_LIGHT = 19,
+  ANDROID_CONTROL_SCENE_MODE_DEVICE_CUSTOM_START = 100,
+  ANDROID_CONTROL_SCENE_MODE_DEVICE_CUSTOM_END = 127,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlVideoStabilizationMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlVideoStabilizationMode.aidl
new file mode 100644
index 0000000..b3b24f7
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ControlVideoStabilizationMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ControlVideoStabilizationMode {
+  ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_OFF = 0,
+  ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_ON = 1,
+  ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_PREVIEW_STABILIZATION = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DemosaicMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DemosaicMode.aidl
new file mode 100644
index 0000000..26874a2
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DemosaicMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum DemosaicMode {
+  ANDROID_DEMOSAIC_MODE_FAST = 0,
+  ANDROID_DEMOSAIC_MODE_HIGH_QUALITY = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurations.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurations.aidl
new file mode 100644
index 0000000..6a154ca
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurations.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum DepthAvailableDepthStreamConfigurations {
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_OUTPUT = 0,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..23d6589
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum DepthAvailableDepthStreamConfigurationsMaximumResolution {
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT = 0,
+  ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurations.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurations.aidl
new file mode 100644
index 0000000..f3ca039
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurations.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum DepthAvailableDynamicDepthStreamConfigurations {
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_OUTPUT = 0,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..46a4ce6
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution {
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT = 0,
+  ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthDepthIsExclusive.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthDepthIsExclusive.aidl
new file mode 100644
index 0000000..f5fc218
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DepthDepthIsExclusive.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum DepthDepthIsExclusive {
+  ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE_FALSE = 0,
+  ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DistortionCorrectionMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DistortionCorrectionMode.aidl
new file mode 100644
index 0000000..46327e0
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/DistortionCorrectionMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum DistortionCorrectionMode {
+  ANDROID_DISTORTION_CORRECTION_MODE_OFF = 0,
+  ANDROID_DISTORTION_CORRECTION_MODE_FAST = 1,
+  ANDROID_DISTORTION_CORRECTION_MODE_HIGH_QUALITY = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/EdgeMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/EdgeMode.aidl
new file mode 100644
index 0000000..4b02e19
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/EdgeMode.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum EdgeMode {
+  ANDROID_EDGE_MODE_OFF = 0,
+  ANDROID_EDGE_MODE_FAST = 1,
+  ANDROID_EDGE_MODE_HIGH_QUALITY = 2,
+  ANDROID_EDGE_MODE_ZERO_SHUTTER_LAG = 3,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashInfoAvailable.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashInfoAvailable.aidl
new file mode 100644
index 0000000..10d07a5
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashInfoAvailable.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum FlashInfoAvailable {
+  ANDROID_FLASH_INFO_AVAILABLE_FALSE = 0,
+  ANDROID_FLASH_INFO_AVAILABLE_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashMode.aidl
new file mode 100644
index 0000000..1ab0560
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum FlashMode {
+  ANDROID_FLASH_MODE_OFF = 0,
+  ANDROID_FLASH_MODE_SINGLE = 1,
+  ANDROID_FLASH_MODE_TORCH = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashState.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashState.aidl
new file mode 100644
index 0000000..a571e66
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/FlashState.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum FlashState {
+  ANDROID_FLASH_STATE_UNAVAILABLE = 0,
+  ANDROID_FLASH_STATE_CHARGING = 1,
+  ANDROID_FLASH_STATE_READY = 2,
+  ANDROID_FLASH_STATE_FIRED = 3,
+  ANDROID_FLASH_STATE_PARTIAL = 4,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurations.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurations.aidl
new file mode 100644
index 0000000..d92c2db
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurations.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum HeicAvailableHeicStreamConfigurations {
+  ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_OUTPUT = 0,
+  ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..f02cf58
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum HeicAvailableHeicStreamConfigurationsMaximumResolution {
+  ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT = 0,
+  ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicInfoSupported.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicInfoSupported.aidl
new file mode 100644
index 0000000..ae5a8e7
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HeicInfoSupported.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum HeicInfoSupported {
+  ANDROID_HEIC_INFO_SUPPORTED_FALSE = 0,
+  ANDROID_HEIC_INFO_SUPPORTED_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HotPixelMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HotPixelMode.aidl
new file mode 100644
index 0000000..1248c60
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/HotPixelMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum HotPixelMode {
+  ANDROID_HOT_PIXEL_MODE_OFF = 0,
+  ANDROID_HOT_PIXEL_MODE_FAST = 1,
+  ANDROID_HOT_PIXEL_MODE_HIGH_QUALITY = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/InfoSupportedBufferManagementVersion.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/InfoSupportedBufferManagementVersion.aidl
new file mode 100644
index 0000000..1272f27
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/InfoSupportedBufferManagementVersion.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum InfoSupportedBufferManagementVersion {
+  ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION_AIDL_DEVICE = 0,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/InfoSupportedHardwareLevel.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/InfoSupportedHardwareLevel.aidl
new file mode 100644
index 0000000..8ae39b0
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/InfoSupportedHardwareLevel.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum InfoSupportedHardwareLevel {
+  ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED = 0,
+  ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_FULL = 1,
+  ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY = 2,
+  ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3 = 3,
+  ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL = 4,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LedAvailableLeds.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LedAvailableLeds.aidl
new file mode 100644
index 0000000..da558d2
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LedAvailableLeds.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LedAvailableLeds {
+  ANDROID_LED_AVAILABLE_LEDS_TRANSMIT = 0,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LedTransmit.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LedTransmit.aidl
new file mode 100644
index 0000000..658b3cd
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LedTransmit.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LedTransmit {
+  ANDROID_LED_TRANSMIT_OFF = 0,
+  ANDROID_LED_TRANSMIT_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensFacing.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensFacing.aidl
new file mode 100644
index 0000000..4db987b
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensFacing.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LensFacing {
+  ANDROID_LENS_FACING_FRONT = 0,
+  ANDROID_LENS_FACING_BACK = 1,
+  ANDROID_LENS_FACING_EXTERNAL = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensInfoFocusDistanceCalibration.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensInfoFocusDistanceCalibration.aidl
new file mode 100644
index 0000000..d83d67f
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensInfoFocusDistanceCalibration.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LensInfoFocusDistanceCalibration {
+  ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED = 0,
+  ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE = 1,
+  ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensOpticalStabilizationMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensOpticalStabilizationMode.aidl
new file mode 100644
index 0000000..f2f039c
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensOpticalStabilizationMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LensOpticalStabilizationMode {
+  ANDROID_LENS_OPTICAL_STABILIZATION_MODE_OFF = 0,
+  ANDROID_LENS_OPTICAL_STABILIZATION_MODE_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensPoseReference.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensPoseReference.aidl
new file mode 100644
index 0000000..275d77b
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensPoseReference.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LensPoseReference {
+  ANDROID_LENS_POSE_REFERENCE_PRIMARY_CAMERA = 0,
+  ANDROID_LENS_POSE_REFERENCE_GYROSCOPE = 1,
+  ANDROID_LENS_POSE_REFERENCE_UNDEFINED = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensState.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensState.aidl
new file mode 100644
index 0000000..4b15b0f
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LensState.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LensState {
+  ANDROID_LENS_STATE_STATIONARY = 0,
+  ANDROID_LENS_STATE_MOVING = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LogicalMultiCameraSensorSyncType.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LogicalMultiCameraSensorSyncType.aidl
new file mode 100644
index 0000000..224a7fa
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/LogicalMultiCameraSensorSyncType.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum LogicalMultiCameraSensorSyncType {
+  ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE = 0,
+  ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/NoiseReductionMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/NoiseReductionMode.aidl
new file mode 100644
index 0000000..ed0ebc1
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/NoiseReductionMode.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum NoiseReductionMode {
+  ANDROID_NOISE_REDUCTION_MODE_OFF = 0,
+  ANDROID_NOISE_REDUCTION_MODE_FAST = 1,
+  ANDROID_NOISE_REDUCTION_MODE_HIGH_QUALITY = 2,
+  ANDROID_NOISE_REDUCTION_MODE_MINIMAL = 3,
+  ANDROID_NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG = 4,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/QuirksPartialResult.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/QuirksPartialResult.aidl
new file mode 100644
index 0000000..d217fe8
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/QuirksPartialResult.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum QuirksPartialResult {
+  ANDROID_QUIRKS_PARTIAL_RESULT_FINAL = 0,
+  ANDROID_QUIRKS_PARTIAL_RESULT_PARTIAL = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestAvailableCapabilities.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestAvailableCapabilities.aidl
new file mode 100644
index 0000000..4462936
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestAvailableCapabilities.aidl
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum RequestAvailableCapabilities {
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE = 0,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR = 1,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING = 2,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW = 3,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING = 4,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS = 5,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE = 6,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING = 7,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT = 8,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO = 9,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING = 10,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA = 11,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME = 12,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_SECURE_IMAGE_DATA = 13,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_SYSTEM_CAMERA = 14,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_OFFLINE_PROCESSING = 15,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR = 16,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_REMOSAIC_REPROCESSING = 17,
+  ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DYNAMIC_RANGE_TEN_BIT = 18,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestAvailableDynamicRangeProfilesMap.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestAvailableDynamicRangeProfilesMap.aidl
new file mode 100644
index 0000000..cec4ac1
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestAvailableDynamicRangeProfilesMap.aidl
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum RequestAvailableDynamicRangeProfilesMap {
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_STANDARD = 1,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_HLG10 = 2,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_HDR10 = 4,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_HDR10_PLUS = 8,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_REF = 16,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_REF_PO = 32,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_OEM = 64,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_OEM_PO = 128,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_REF = 256,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_REF_PO = 512,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_OEM = 1024,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_OEM_PO = 2048,
+  ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_MAX = 4096,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestMetadataMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestMetadataMode.aidl
new file mode 100644
index 0000000..90fba00
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestMetadataMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum RequestMetadataMode {
+  ANDROID_REQUEST_METADATA_MODE_NONE = 0,
+  ANDROID_REQUEST_METADATA_MODE_FULL = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestType.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestType.aidl
new file mode 100644
index 0000000..4f38cfb
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/RequestType.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum RequestType {
+  ANDROID_REQUEST_TYPE_CAPTURE = 0,
+  ANDROID_REQUEST_TYPE_REPROCESS = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableFormats.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableFormats.aidl
new file mode 100644
index 0000000..41fd2c2
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableFormats.aidl
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerAvailableFormats {
+  ANDROID_SCALER_AVAILABLE_FORMATS_RAW16 = 32,
+  ANDROID_SCALER_AVAILABLE_FORMATS_RAW_OPAQUE = 36,
+  ANDROID_SCALER_AVAILABLE_FORMATS_YV12 = 842094169,
+  ANDROID_SCALER_AVAILABLE_FORMATS_YCrCb_420_SP = 17,
+  ANDROID_SCALER_AVAILABLE_FORMATS_IMPLEMENTATION_DEFINED = 34,
+  ANDROID_SCALER_AVAILABLE_FORMATS_YCbCr_420_888 = 35,
+  ANDROID_SCALER_AVAILABLE_FORMATS_BLOB = 33,
+  ANDROID_SCALER_AVAILABLE_FORMATS_RAW10 = 37,
+  ANDROID_SCALER_AVAILABLE_FORMATS_RAW12 = 38,
+  ANDROID_SCALER_AVAILABLE_FORMATS_Y8 = 538982489,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableRecommendedStreamConfigurations.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableRecommendedStreamConfigurations.aidl
new file mode 100644
index 0000000..85daa85
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableRecommendedStreamConfigurations.aidl
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerAvailableRecommendedStreamConfigurations {
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_PREVIEW = 0,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_RECORD = 1,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_VIDEO_SNAPSHOT = 2,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_SNAPSHOT = 3,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_ZSL = 4,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_RAW = 5,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_LOW_LATENCY_SNAPSHOT = 6,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_10BIT_OUTPUT = 8,
+  ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_VENDOR_START = 24,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableStreamConfigurations.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableStreamConfigurations.aidl
new file mode 100644
index 0000000..1515ad5
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableStreamConfigurations.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerAvailableStreamConfigurations {
+  ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_OUTPUT = 0,
+  ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..b9c3374
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerAvailableStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerAvailableStreamConfigurationsMaximumResolution {
+  ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT = 0,
+  ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerCroppingType.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerCroppingType.aidl
new file mode 100644
index 0000000..0487196
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerCroppingType.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerCroppingType {
+  ANDROID_SCALER_CROPPING_TYPE_CENTER_ONLY = 0,
+  ANDROID_SCALER_CROPPING_TYPE_FREEFORM = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerMultiResolutionStreamSupported.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerMultiResolutionStreamSupported.aidl
new file mode 100644
index 0000000..711243f
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerMultiResolutionStreamSupported.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerMultiResolutionStreamSupported {
+  ANDROID_SCALER_MULTI_RESOLUTION_STREAM_SUPPORTED_FALSE = 0,
+  ANDROID_SCALER_MULTI_RESOLUTION_STREAM_SUPPORTED_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerPhysicalCameraMultiResolutionStreamConfigurations.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerPhysicalCameraMultiResolutionStreamConfigurations.aidl
new file mode 100644
index 0000000..50bc097
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerPhysicalCameraMultiResolutionStreamConfigurations.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerPhysicalCameraMultiResolutionStreamConfigurations {
+  ANDROID_SCALER_PHYSICAL_CAMERA_MULTI_RESOLUTION_STREAM_CONFIGURATIONS_OUTPUT = 0,
+  ANDROID_SCALER_PHYSICAL_CAMERA_MULTI_RESOLUTION_STREAM_CONFIGURATIONS_INPUT = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerRotateAndCrop.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerRotateAndCrop.aidl
new file mode 100644
index 0000000..3b9c5b8
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ScalerRotateAndCrop.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ScalerRotateAndCrop {
+  ANDROID_SCALER_ROTATE_AND_CROP_NONE = 0,
+  ANDROID_SCALER_ROTATE_AND_CROP_90 = 1,
+  ANDROID_SCALER_ROTATE_AND_CROP_180 = 2,
+  ANDROID_SCALER_ROTATE_AND_CROP_270 = 3,
+  ANDROID_SCALER_ROTATE_AND_CROP_AUTO = 4,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoColorFilterArrangement.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoColorFilterArrangement.aidl
new file mode 100644
index 0000000..3400233
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoColorFilterArrangement.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SensorInfoColorFilterArrangement {
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB = 0,
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG = 1,
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG = 2,
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR = 3,
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB = 4,
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_MONO = 5,
+  ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_NIR = 6,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoLensShadingApplied.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoLensShadingApplied.aidl
new file mode 100644
index 0000000..c8faaee
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoLensShadingApplied.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SensorInfoLensShadingApplied {
+  ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED_FALSE = 0,
+  ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED_TRUE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoTimestampSource.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoTimestampSource.aidl
new file mode 100644
index 0000000..2a4b3dd
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorInfoTimestampSource.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SensorInfoTimestampSource {
+  ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN = 0,
+  ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorPixelMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorPixelMode.aidl
new file mode 100644
index 0000000..e021434
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorPixelMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SensorPixelMode {
+  ANDROID_SENSOR_PIXEL_MODE_DEFAULT = 0,
+  ANDROID_SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorRawBinningFactorUsed.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorRawBinningFactorUsed.aidl
new file mode 100644
index 0000000..a1f0c5f
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorRawBinningFactorUsed.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SensorRawBinningFactorUsed {
+  ANDROID_SENSOR_RAW_BINNING_FACTOR_USED_TRUE = 0,
+  ANDROID_SENSOR_RAW_BINNING_FACTOR_USED_FALSE = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorReferenceIlluminant1.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorReferenceIlluminant1.aidl
new file mode 100644
index 0000000..cd22d2e
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorReferenceIlluminant1.aidl
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SensorReferenceIlluminant1 {
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT = 1,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT = 2,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN = 3,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FLASH = 4,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER = 9,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER = 10,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_SHADE = 11,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT = 12,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT = 13,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT = 14,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT = 15,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A = 17,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B = 18,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C = 19,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D55 = 20,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D65 = 21,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D75 = 22,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D50 = 23,
+  ANDROID_SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN = 24,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorTestPatternMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorTestPatternMode.aidl
new file mode 100644
index 0000000..d013bf4
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SensorTestPatternMode.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SensorTestPatternMode {
+  ANDROID_SENSOR_TEST_PATTERN_MODE_OFF = 0,
+  ANDROID_SENSOR_TEST_PATTERN_MODE_SOLID_COLOR = 1,
+  ANDROID_SENSOR_TEST_PATTERN_MODE_COLOR_BARS = 2,
+  ANDROID_SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY = 3,
+  ANDROID_SENSOR_TEST_PATTERN_MODE_PN9 = 4,
+  ANDROID_SENSOR_TEST_PATTERN_MODE_CUSTOM1 = 256,
+  ANDROID_SENSOR_TEST_PATTERN_MODE_BLACK = 257,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ShadingMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ShadingMode.aidl
new file mode 100644
index 0000000..a2d2a32
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/ShadingMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum ShadingMode {
+  ANDROID_SHADING_MODE_OFF = 0,
+  ANDROID_SHADING_MODE_FAST = 1,
+  ANDROID_SHADING_MODE_HIGH_QUALITY = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsFaceDetectMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsFaceDetectMode.aidl
new file mode 100644
index 0000000..1c65f99
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsFaceDetectMode.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum StatisticsFaceDetectMode {
+  ANDROID_STATISTICS_FACE_DETECT_MODE_OFF = 0,
+  ANDROID_STATISTICS_FACE_DETECT_MODE_SIMPLE = 1,
+  ANDROID_STATISTICS_FACE_DETECT_MODE_FULL = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsHistogramMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsHistogramMode.aidl
new file mode 100644
index 0000000..39a013e
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsHistogramMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum StatisticsHistogramMode {
+  ANDROID_STATISTICS_HISTOGRAM_MODE_OFF = 0,
+  ANDROID_STATISTICS_HISTOGRAM_MODE_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsHotPixelMapMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsHotPixelMapMode.aidl
new file mode 100644
index 0000000..3a8c6c2
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsHotPixelMapMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum StatisticsHotPixelMapMode {
+  ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_OFF = 0,
+  ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsLensShadingMapMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsLensShadingMapMode.aidl
new file mode 100644
index 0000000..cc280ca
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsLensShadingMapMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum StatisticsLensShadingMapMode {
+  ANDROID_STATISTICS_LENS_SHADING_MAP_MODE_OFF = 0,
+  ANDROID_STATISTICS_LENS_SHADING_MAP_MODE_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsOisDataMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsOisDataMode.aidl
new file mode 100644
index 0000000..6607037
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsOisDataMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum StatisticsOisDataMode {
+  ANDROID_STATISTICS_OIS_DATA_MODE_OFF = 0,
+  ANDROID_STATISTICS_OIS_DATA_MODE_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsSceneFlicker.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsSceneFlicker.aidl
new file mode 100644
index 0000000..bc286c3
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsSceneFlicker.aidl
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum StatisticsSceneFlicker {
+  ANDROID_STATISTICS_SCENE_FLICKER_NONE = 0,
+  ANDROID_STATISTICS_SCENE_FLICKER_50HZ = 1,
+  ANDROID_STATISTICS_SCENE_FLICKER_60HZ = 2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsSharpnessMapMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsSharpnessMapMode.aidl
new file mode 100644
index 0000000..774a43a
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/StatisticsSharpnessMapMode.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum StatisticsSharpnessMapMode {
+  ANDROID_STATISTICS_SHARPNESS_MAP_MODE_OFF = 0,
+  ANDROID_STATISTICS_SHARPNESS_MAP_MODE_ON = 1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SyncFrameNumber.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SyncFrameNumber.aidl
new file mode 100644
index 0000000..12ccbb9
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SyncFrameNumber.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SyncFrameNumber {
+  ANDROID_SYNC_FRAME_NUMBER_CONVERGING = -1,
+  ANDROID_SYNC_FRAME_NUMBER_UNKNOWN = -2,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SyncMaxLatency.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SyncMaxLatency.aidl
new file mode 100644
index 0000000..e0116e7
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/SyncMaxLatency.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum SyncMaxLatency {
+  ANDROID_SYNC_MAX_LATENCY_PER_FRAME_CONTROL = 0,
+  ANDROID_SYNC_MAX_LATENCY_UNKNOWN = -1,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/TonemapMode.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/TonemapMode.aidl
new file mode 100644
index 0000000..728b298
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/TonemapMode.aidl
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum TonemapMode {
+  ANDROID_TONEMAP_MODE_CONTRAST_CURVE = 0,
+  ANDROID_TONEMAP_MODE_FAST = 1,
+  ANDROID_TONEMAP_MODE_HIGH_QUALITY = 2,
+  ANDROID_TONEMAP_MODE_GAMMA_VALUE = 3,
+  ANDROID_TONEMAP_MODE_PRESET_CURVE = 4,
+}
diff --git a/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/TonemapPresetCurve.aidl b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/TonemapPresetCurve.aidl
new file mode 100644
index 0000000..fc2e39b
--- /dev/null
+++ b/camera/metadata/aidl/aidl_api/android.hardware.camera.metadata/current/android/hardware/camera/metadata/TonemapPresetCurve.aidl
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *//*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.metadata;
+@Backing(type="int") @VintfStability
+enum TonemapPresetCurve {
+  ANDROID_TONEMAP_PRESET_CURVE_SRGB = 0,
+  ANDROID_TONEMAP_PRESET_CURVE_REC709 = 1,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/BlackLevelLock.aidl
similarity index 60%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/BlackLevelLock.aidl
index abebe6a..4746cf3 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/BlackLevelLock.aidl
@@ -14,9 +14,21 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.blackLevel.lock enumeration values
+ * @see ANDROID_BLACK_LEVEL_LOCK
+ */
+@VintfStability
+@Backing(type="int")
+enum BlackLevelLock {
+    ANDROID_BLACK_LEVEL_LOCK_OFF,
+    ANDROID_BLACK_LEVEL_LOCK_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataSection.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataSection.aidl
new file mode 100644
index 0000000..cc3d3b3
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataSection.aidl
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * Top level hierarchy definitions for camera metadata. *_INFO sections are for
+ * the static metadata that can be retrieved without opening the camera device.
+ */
+@VintfStability
+@Backing(type="int")
+enum CameraMetadataSection {
+    ANDROID_COLOR_CORRECTION,
+    ANDROID_CONTROL,
+    ANDROID_DEMOSAIC,
+    ANDROID_EDGE,
+    ANDROID_FLASH,
+    ANDROID_FLASH_INFO,
+    ANDROID_HOT_PIXEL,
+    ANDROID_JPEG,
+    ANDROID_LENS,
+    ANDROID_LENS_INFO,
+    ANDROID_NOISE_REDUCTION,
+    ANDROID_QUIRKS,
+    ANDROID_REQUEST,
+    ANDROID_SCALER,
+    ANDROID_SENSOR,
+    ANDROID_SENSOR_INFO,
+    ANDROID_SHADING,
+    ANDROID_STATISTICS,
+    ANDROID_STATISTICS_INFO,
+    ANDROID_TONEMAP,
+    ANDROID_LED,
+    ANDROID_INFO,
+    ANDROID_BLACK_LEVEL,
+    ANDROID_SYNC,
+    ANDROID_REPROCESS,
+    ANDROID_DEPTH,
+    ANDROID_LOGICAL_MULTI_CAMERA,
+    ANDROID_DISTORTION_CORRECTION,
+    ANDROID_HEIC,
+    ANDROID_HEIC_INFO,
+    VENDOR_SECTION = 0x8000,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataSectionStart.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataSectionStart.aidl
new file mode 100644
index 0000000..d5cd0b4
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataSectionStart.aidl
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+import android.hardware.camera.metadata.CameraMetadataSection;
+
+/**
+ * Hierarchy positions in enum space. All vendor extension sections must be
+ * defined with tag >= VENDOR_SECTION_START
+ */
+@VintfStability
+@Backing(type="int")
+enum CameraMetadataSectionStart {
+    ANDROID_COLOR_CORRECTION_START = CameraMetadataSection.ANDROID_COLOR_CORRECTION << 16,
+    ANDROID_CONTROL_START = CameraMetadataSection.ANDROID_CONTROL << 16,
+    ANDROID_DEMOSAIC_START = CameraMetadataSection.ANDROID_DEMOSAIC << 16,
+    ANDROID_EDGE_START = CameraMetadataSection.ANDROID_EDGE << 16,
+    ANDROID_FLASH_START = CameraMetadataSection.ANDROID_FLASH << 16,
+    ANDROID_FLASH_INFO_START = CameraMetadataSection.ANDROID_FLASH_INFO << 16,
+    ANDROID_HOT_PIXEL_START = CameraMetadataSection.ANDROID_HOT_PIXEL << 16,
+    ANDROID_JPEG_START = CameraMetadataSection.ANDROID_JPEG << 16,
+    ANDROID_LENS_START = CameraMetadataSection.ANDROID_LENS << 16,
+    ANDROID_LENS_INFO_START = CameraMetadataSection.ANDROID_LENS_INFO << 16,
+    ANDROID_NOISE_REDUCTION_START = CameraMetadataSection.ANDROID_NOISE_REDUCTION << 16,
+    ANDROID_QUIRKS_START = CameraMetadataSection.ANDROID_QUIRKS << 16,
+    ANDROID_REQUEST_START = CameraMetadataSection.ANDROID_REQUEST << 16,
+    ANDROID_SCALER_START = CameraMetadataSection.ANDROID_SCALER << 16,
+    ANDROID_SENSOR_START = CameraMetadataSection.ANDROID_SENSOR << 16,
+    ANDROID_SENSOR_INFO_START = CameraMetadataSection.ANDROID_SENSOR_INFO << 16,
+    ANDROID_SHADING_START = CameraMetadataSection.ANDROID_SHADING << 16,
+    ANDROID_STATISTICS_START = CameraMetadataSection.ANDROID_STATISTICS << 16,
+    ANDROID_STATISTICS_INFO_START = CameraMetadataSection.ANDROID_STATISTICS_INFO << 16,
+    ANDROID_TONEMAP_START = CameraMetadataSection.ANDROID_TONEMAP << 16,
+    ANDROID_LED_START = CameraMetadataSection.ANDROID_LED << 16,
+    ANDROID_INFO_START = CameraMetadataSection.ANDROID_INFO << 16,
+    ANDROID_BLACK_LEVEL_START = CameraMetadataSection.ANDROID_BLACK_LEVEL << 16,
+    ANDROID_SYNC_START = CameraMetadataSection.ANDROID_SYNC << 16,
+    ANDROID_REPROCESS_START = CameraMetadataSection.ANDROID_REPROCESS << 16,
+    ANDROID_DEPTH_START = CameraMetadataSection.ANDROID_DEPTH << 16,
+    VENDOR_SECTION_START = CameraMetadataSection.VENDOR_SECTION << 16,
+    ANDROID_LOGICAL_MULTI_CAMERA_START = CameraMetadataSection.ANDROID_LOGICAL_MULTI_CAMERA << 16,
+    ANDROID_DISTORTION_CORRECTION_START = CameraMetadataSection.ANDROID_DISTORTION_CORRECTION << 16,
+    ANDROID_HEIC_START = CameraMetadataSection.ANDROID_HEIC << 16,
+    ANDROID_HEIC_INFO_START = CameraMetadataSection.ANDROID_HEIC_INFO << 16,
+    VENDOR_SECTION_START = CameraMetadataSection.VENDOR_SECTION << 16,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataTag.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataTag.aidl
new file mode 100644
index 0000000..fb7ca12
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/CameraMetadataTag.aidl
@@ -0,0 +1,2229 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+import android.hardware.camera.metadata.CameraMetadataSectionStart;
+
+/**
+ * Main enumeration for defining camera metadata tags added in this revision
+ *
+ * <p>Partial documentation is included for each tag; for complete documentation, reference
+ * '/system/media/camera/docs/docs.html' in the corresponding Android source tree.</p>
+ */
+@VintfStability
+@Backing(type="int")
+enum CameraMetadataTag {
+    /**
+     * android.colorCorrection.mode [dynamic, enum, public]
+     *
+     * <p>The mode control selects how the image data is converted from the
+     * sensor's native color into linear sRGB color.</p>
+     */
+    ANDROID_COLOR_CORRECTION_MODE = CameraMetadataSectionStart.ANDROID_COLOR_CORRECTION_START,
+    /**
+     * android.colorCorrection.transform [dynamic, rational[], public]
+     *
+     * <p>A color transform matrix to use to transform
+     * from sensor RGB color space to output linear sRGB color space.</p>
+     */
+    ANDROID_COLOR_CORRECTION_TRANSFORM,
+    /**
+     * android.colorCorrection.gains [dynamic, float[], public]
+     *
+     * <p>Gains applying to Bayer raw color channels for
+     * white-balance.</p>
+     */
+    ANDROID_COLOR_CORRECTION_GAINS,
+    /**
+     * android.colorCorrection.aberrationMode [dynamic, enum, public]
+     *
+     * <p>Mode of operation for the chromatic aberration correction algorithm.</p>
+     */
+    ANDROID_COLOR_CORRECTION_ABERRATION_MODE,
+    /**
+     * android.colorCorrection.availableAberrationModes [static, byte[], public]
+     *
+     * <p>List of aberration correction modes for ANDROID_COLOR_CORRECTION_ABERRATION_MODE that are
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_COLOR_CORRECTION_ABERRATION_MODE
+     */
+    ANDROID_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES,
+    /**
+     * android.control.aeAntibandingMode [dynamic, enum, public]
+     *
+     * <p>The desired setting for the camera device's auto-exposure
+     * algorithm's antibanding compensation.</p>
+     */
+    ANDROID_CONTROL_AE_ANTIBANDING_MODE = CameraMetadataSectionStart.ANDROID_CONTROL_START,
+    /**
+     * android.control.aeExposureCompensation [dynamic, int32, public]
+     *
+     * <p>Adjustment to auto-exposure (AE) target image
+     * brightness.</p>
+     */
+    ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION,
+    /**
+     * android.control.aeLock [dynamic, enum, public]
+     *
+     * <p>Whether auto-exposure (AE) is currently locked to its latest
+     * calculated values.</p>
+     */
+    ANDROID_CONTROL_AE_LOCK,
+    /**
+     * android.control.aeMode [dynamic, enum, public]
+     *
+     * <p>The desired mode for the camera device's
+     * auto-exposure routine.</p>
+     */
+    ANDROID_CONTROL_AE_MODE,
+    /**
+     * android.control.aeRegions [dynamic, int32[], public]
+     *
+     * <p>List of metering areas to use for auto-exposure adjustment.</p>
+     */
+    ANDROID_CONTROL_AE_REGIONS,
+    /**
+     * android.control.aeTargetFpsRange [dynamic, int32[], public]
+     *
+     * <p>Range over which the auto-exposure routine can
+     * adjust the capture frame rate to maintain good
+     * exposure.</p>
+     */
+    ANDROID_CONTROL_AE_TARGET_FPS_RANGE,
+    /**
+     * android.control.aePrecaptureTrigger [dynamic, enum, public]
+     *
+     * <p>Whether the camera device will trigger a precapture
+     * metering sequence when it processes this request.</p>
+     */
+    ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER,
+    /**
+     * android.control.afMode [dynamic, enum, public]
+     *
+     * <p>Whether auto-focus (AF) is currently enabled, and what
+     * mode it is set to.</p>
+     */
+    ANDROID_CONTROL_AF_MODE,
+    /**
+     * android.control.afRegions [dynamic, int32[], public]
+     *
+     * <p>List of metering areas to use for auto-focus.</p>
+     */
+    ANDROID_CONTROL_AF_REGIONS,
+    /**
+     * android.control.afTrigger [dynamic, enum, public]
+     *
+     * <p>Whether the camera device will trigger autofocus for this request.</p>
+     */
+    ANDROID_CONTROL_AF_TRIGGER,
+    /**
+     * android.control.awbLock [dynamic, enum, public]
+     *
+     * <p>Whether auto-white balance (AWB) is currently locked to its
+     * latest calculated values.</p>
+     */
+    ANDROID_CONTROL_AWB_LOCK,
+    /**
+     * android.control.awbMode [dynamic, enum, public]
+     *
+     * <p>Whether auto-white balance (AWB) is currently setting the color
+     * transform fields, and what its illumination target
+     * is.</p>
+     */
+    ANDROID_CONTROL_AWB_MODE,
+    /**
+     * android.control.awbRegions [dynamic, int32[], public]
+     *
+     * <p>List of metering areas to use for auto-white-balance illuminant
+     * estimation.</p>
+     */
+    ANDROID_CONTROL_AWB_REGIONS,
+    /**
+     * android.control.captureIntent [dynamic, enum, public]
+     *
+     * <p>Information to the camera device 3A (auto-exposure,
+     * auto-focus, auto-white balance) routines about the purpose
+     * of this capture, to help the camera device to decide optimal 3A
+     * strategy.</p>
+     */
+    ANDROID_CONTROL_CAPTURE_INTENT,
+    /**
+     * android.control.effectMode [dynamic, enum, public]
+     *
+     * <p>A special color effect to apply.</p>
+     */
+    ANDROID_CONTROL_EFFECT_MODE,
+    /**
+     * android.control.mode [dynamic, enum, public]
+     *
+     * <p>Overall mode of 3A (auto-exposure, auto-white-balance, auto-focus) control
+     * routines.</p>
+     */
+    ANDROID_CONTROL_MODE,
+    /**
+     * android.control.sceneMode [dynamic, enum, public]
+     *
+     * <p>Control for which scene mode is currently active.</p>
+     */
+    ANDROID_CONTROL_SCENE_MODE,
+    /**
+     * android.control.videoStabilizationMode [dynamic, enum, public]
+     *
+     * <p>Whether video stabilization is
+     * active.</p>
+     */
+    ANDROID_CONTROL_VIDEO_STABILIZATION_MODE,
+    /**
+     * android.control.aeAvailableAntibandingModes [static, byte[], public]
+     *
+     * <p>List of auto-exposure antibanding modes for ANDROID_CONTROL_AE_ANTIBANDING_MODE that are
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_CONTROL_AE_ANTIBANDING_MODE
+     */
+    ANDROID_CONTROL_AE_AVAILABLE_ANTIBANDING_MODES,
+    /**
+     * android.control.aeAvailableModes [static, byte[], public]
+     *
+     * <p>List of auto-exposure modes for ANDROID_CONTROL_AE_MODE that are supported by this camera
+     * device.</p>
+     *
+     * @see ANDROID_CONTROL_AE_MODE
+     */
+    ANDROID_CONTROL_AE_AVAILABLE_MODES,
+    /**
+     * android.control.aeAvailableTargetFpsRanges [static, int32[], public]
+     *
+     * <p>List of frame rate ranges for ANDROID_CONTROL_AE_TARGET_FPS_RANGE supported by
+     * this camera device.</p>
+     *
+     * @see ANDROID_CONTROL_AE_TARGET_FPS_RANGE
+     */
+    ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES,
+    /**
+     * android.control.aeCompensationRange [static, int32[], public]
+     *
+     * <p>Maximum and minimum exposure compensation values for
+     * ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION, in counts of ANDROID_CONTROL_AE_COMPENSATION_STEP,
+     * that are supported by this camera device.</p>
+     *
+     * @see ANDROID_CONTROL_AE_COMPENSATION_STEP
+     * @see ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION
+     */
+    ANDROID_CONTROL_AE_COMPENSATION_RANGE,
+    /**
+     * android.control.aeCompensationStep [static, rational, public]
+     *
+     * <p>Smallest step by which the exposure compensation
+     * can be changed.</p>
+     */
+    ANDROID_CONTROL_AE_COMPENSATION_STEP,
+    /**
+     * android.control.afAvailableModes [static, byte[], public]
+     *
+     * <p>List of auto-focus (AF) modes for ANDROID_CONTROL_AF_MODE that are
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_CONTROL_AF_MODE
+     */
+    ANDROID_CONTROL_AF_AVAILABLE_MODES,
+    /**
+     * android.control.availableEffects [static, byte[], public]
+     *
+     * <p>List of color effects for ANDROID_CONTROL_EFFECT_MODE that are supported by this camera
+     * device.</p>
+     *
+     * @see ANDROID_CONTROL_EFFECT_MODE
+     */
+    ANDROID_CONTROL_AVAILABLE_EFFECTS,
+    /**
+     * android.control.availableSceneModes [static, byte[], public]
+     *
+     * <p>List of scene modes for ANDROID_CONTROL_SCENE_MODE that are supported by this camera
+     * device.</p>
+     *
+     * @see ANDROID_CONTROL_SCENE_MODE
+     */
+    ANDROID_CONTROL_AVAILABLE_SCENE_MODES,
+    /**
+     * android.control.availableVideoStabilizationModes [static, byte[], public]
+     *
+     * <p>List of video stabilization modes for ANDROID_CONTROL_VIDEO_STABILIZATION_MODE
+     * that are supported by this camera device.</p>
+     *
+     * @see ANDROID_CONTROL_VIDEO_STABILIZATION_MODE
+     */
+    ANDROID_CONTROL_AVAILABLE_VIDEO_STABILIZATION_MODES,
+    /**
+     * android.control.awbAvailableModes [static, byte[], public]
+     *
+     * <p>List of auto-white-balance modes for ANDROID_CONTROL_AWB_MODE that are supported by this
+     * camera device.</p>
+     *
+     * @see ANDROID_CONTROL_AWB_MODE
+     */
+    ANDROID_CONTROL_AWB_AVAILABLE_MODES,
+    /**
+     * android.control.maxRegions [static, int32[], ndk_public]
+     *
+     * <p>List of the maximum number of regions that can be used for metering in
+     * auto-exposure (AE), auto-white balance (AWB), and auto-focus (AF);
+     * this corresponds to the maximum number of elements in
+     * ANDROID_CONTROL_AE_REGIONS, ANDROID_CONTROL_AWB_REGIONS,
+     * and ANDROID_CONTROL_AF_REGIONS.</p>
+     *
+     * @see ANDROID_CONTROL_AE_REGIONS
+     * @see ANDROID_CONTROL_AF_REGIONS
+     * @see ANDROID_CONTROL_AWB_REGIONS
+     */
+    ANDROID_CONTROL_MAX_REGIONS,
+    /**
+     * android.control.sceneModeOverrides [static, byte[], system]
+     *
+     * <p>Ordered list of auto-exposure, auto-white balance, and auto-focus
+     * settings to use with each available scene mode.</p>
+     */
+    ANDROID_CONTROL_SCENE_MODE_OVERRIDES,
+    /**
+     * android.control.aePrecaptureId [dynamic, int32, system]
+     *
+     * <p>The ID sent with the latest
+     * CAMERA2_TRIGGER_PRECAPTURE_METERING call</p>
+     */
+    ANDROID_CONTROL_AE_PRECAPTURE_ID,
+    /**
+     * android.control.aeState [dynamic, enum, public]
+     *
+     * <p>Current state of the auto-exposure (AE) algorithm.</p>
+     */
+    ANDROID_CONTROL_AE_STATE,
+    /**
+     * android.control.afState [dynamic, enum, public]
+     *
+     * <p>Current state of auto-focus (AF) algorithm.</p>
+     */
+    ANDROID_CONTROL_AF_STATE,
+    /**
+     * android.control.afTriggerId [dynamic, int32, system]
+     *
+     * <p>The ID sent with the latest
+     * CAMERA2_TRIGGER_AUTOFOCUS call</p>
+     */
+    ANDROID_CONTROL_AF_TRIGGER_ID,
+    /**
+     * android.control.awbState [dynamic, enum, public]
+     *
+     * <p>Current state of auto-white balance (AWB) algorithm.</p>
+     */
+    ANDROID_CONTROL_AWB_STATE,
+    /**
+     * android.control.availableHighSpeedVideoConfigurations [static, int32[], hidden]
+     *
+     * <p>List of available high speed video size, fps range and max batch size configurations
+     * supported by the camera device, in the format of (width, height, fps_min, fps_max, batch_size_max).</p>
+     */
+    ANDROID_CONTROL_AVAILABLE_HIGH_SPEED_VIDEO_CONFIGURATIONS,
+    /**
+     * android.control.aeLockAvailable [static, enum, public]
+     *
+     * <p>Whether the camera device supports ANDROID_CONTROL_AE_LOCK</p>
+     *
+     * @see ANDROID_CONTROL_AE_LOCK
+     */
+    ANDROID_CONTROL_AE_LOCK_AVAILABLE,
+    /**
+     * android.control.awbLockAvailable [static, enum, public]
+     *
+     * <p>Whether the camera device supports ANDROID_CONTROL_AWB_LOCK</p>
+     *
+     * @see ANDROID_CONTROL_AWB_LOCK
+     */
+    ANDROID_CONTROL_AWB_LOCK_AVAILABLE,
+    /**
+     * android.control.availableModes [static, byte[], public]
+     *
+     * <p>List of control modes for ANDROID_CONTROL_MODE that are supported by this camera
+     * device.</p>
+     *
+     * @see ANDROID_CONTROL_MODE
+     */
+    ANDROID_CONTROL_AVAILABLE_MODES,
+    /**
+     * android.control.postRawSensitivityBoostRange [static, int32[], public]
+     *
+     * <p>Range of boosts for ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST supported
+     * by this camera device.</p>
+     *
+     * @see ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST
+     */
+    ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE,
+    /**
+     * android.control.postRawSensitivityBoost [dynamic, int32, public]
+     *
+     * <p>The amount of additional sensitivity boost applied to output images
+     * after RAW sensor data is captured.</p>
+     */
+    ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST,
+    /**
+     * android.control.enableZsl [dynamic, enum, public]
+     *
+     * <p>Allow camera device to enable zero-shutter-lag mode for requests with
+     * ANDROID_CONTROL_CAPTURE_INTENT == STILL_CAPTURE.</p>
+     *
+     * @see ANDROID_CONTROL_CAPTURE_INTENT
+     */
+    ANDROID_CONTROL_ENABLE_ZSL,
+    /**
+     * android.control.afSceneChange [dynamic, enum, public]
+     *
+     * <p>Whether a significant scene change is detected within the currently-set AF
+     * region(s).</p>
+     */
+    ANDROID_CONTROL_AF_SCENE_CHANGE,
+    /**
+     * android.control.availableExtendedSceneModeMaxSizes [static, int32[], ndk_public]
+     *
+     * <p>The list of extended scene modes for ANDROID_CONTROL_EXTENDED_SCENE_MODE that are supported
+     * by this camera device, and each extended scene mode's maximum streaming (non-stall) size
+     * with  effect.</p>
+     *
+     * @see ANDROID_CONTROL_EXTENDED_SCENE_MODE
+     */
+    ANDROID_CONTROL_AVAILABLE_EXTENDED_SCENE_MODE_MAX_SIZES,
+    /**
+     * android.control.availableExtendedSceneModeZoomRatioRanges [static, float[], ndk_public]
+     *
+     * <p>The ranges of supported zoom ratio for non-DISABLED ANDROID_CONTROL_EXTENDED_SCENE_MODE.</p>
+     *
+     * @see ANDROID_CONTROL_EXTENDED_SCENE_MODE
+     */
+    ANDROID_CONTROL_AVAILABLE_EXTENDED_SCENE_MODE_ZOOM_RATIO_RANGES,
+    /**
+     * android.control.extendedSceneMode [dynamic, enum, public]
+     *
+     * <p>Whether extended scene mode is enabled for a particular capture request.</p>
+     */
+    ANDROID_CONTROL_EXTENDED_SCENE_MODE,
+    /**
+     * android.control.zoomRatioRange [static, float[], public]
+     *
+     * <p>Minimum and maximum zoom ratios supported by this camera device.</p>
+     */
+    ANDROID_CONTROL_ZOOM_RATIO_RANGE,
+    /**
+     * android.control.zoomRatio [dynamic, float, public]
+     *
+     * <p>The desired zoom ratio</p>
+     */
+    ANDROID_CONTROL_ZOOM_RATIO,
+    /**
+     * android.control.availableHighSpeedVideoConfigurationsMaximumResolution [static, int32[], hidden]
+     *
+     * <p>List of available high speed video size, fps range and max batch size configurations
+     * supported by the camera device, in the format of
+     * (width, height, fps_min, fps_max, batch_size_max),
+     * when ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_CONTROL_AVAILABLE_HIGH_SPEED_VIDEO_CONFIGURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.demosaic.mode [controls, enum, system]
+     *
+     * <p>Controls the quality of the demosaicing
+     * processing.</p>
+     */
+    ANDROID_DEMOSAIC_MODE = CameraMetadataSectionStart.ANDROID_DEMOSAIC_START,
+    /**
+     * android.edge.mode [dynamic, enum, public]
+     *
+     * <p>Operation mode for edge
+     * enhancement.</p>
+     */
+    ANDROID_EDGE_MODE = CameraMetadataSectionStart.ANDROID_EDGE_START,
+    /**
+     * android.edge.strength [controls, byte, system]
+     *
+     * <p>Control the amount of edge enhancement
+     * applied to the images</p>
+     */
+    ANDROID_EDGE_STRENGTH,
+    /**
+     * android.edge.availableEdgeModes [static, byte[], public]
+     *
+     * <p>List of edge enhancement modes for ANDROID_EDGE_MODE that are supported by this camera
+     * device.</p>
+     *
+     * @see ANDROID_EDGE_MODE
+     */
+    ANDROID_EDGE_AVAILABLE_EDGE_MODES,
+    /**
+     * android.flash.firingPower [dynamic, byte, system]
+     *
+     * <p>Power for flash firing/torch</p>
+     */
+    ANDROID_FLASH_FIRING_POWER = CameraMetadataSectionStart.ANDROID_FLASH_START,
+    /**
+     * android.flash.firingTime [dynamic, int64, system]
+     *
+     * <p>Firing time of flash relative to start of
+     * exposure</p>
+     */
+    ANDROID_FLASH_FIRING_TIME,
+    /**
+     * android.flash.mode [dynamic, enum, public]
+     *
+     * <p>The desired mode for for the camera device's flash control.</p>
+     */
+    ANDROID_FLASH_MODE,
+    /**
+     * android.flash.colorTemperature [static, byte, system]
+     *
+     * <p>The x,y whitepoint of the
+     * flash</p>
+     */
+    ANDROID_FLASH_COLOR_TEMPERATURE,
+    /**
+     * android.flash.maxEnergy [static, byte, system]
+     *
+     * <p>Max energy output of the flash for a full
+     * power single flash</p>
+     */
+    ANDROID_FLASH_MAX_ENERGY,
+    /**
+     * android.flash.state [dynamic, enum, public]
+     *
+     * <p>Current state of the flash
+     * unit.</p>
+     */
+    ANDROID_FLASH_STATE,
+    /**
+     * android.flash.info.available [static, enum, public]
+     *
+     * <p>Whether this camera device has a
+     * flash unit.</p>
+     */
+    ANDROID_FLASH_INFO_AVAILABLE = CameraMetadataSectionStart.ANDROID_FLASH_INFO_START,
+    /**
+     * android.flash.info.chargeDuration [static, int64, system]
+     *
+     * <p>Time taken before flash can fire
+     * again</p>
+     */
+    ANDROID_FLASH_INFO_CHARGE_DURATION,
+    /**
+     * android.flash.info.strengthMaximumLevel [static, int32, public]
+     *
+     * <p>Maximum flashlight brightness level.</p>
+     */
+    ANDROID_FLASH_INFO_STRENGTH_MAXIMUM_LEVEL,
+    /**
+     * android.flash.info.strengthDefaultLevel [static, int32, public]
+     *
+     * <p>Default flashlight brightness level to be set via
+     * {android.hardware.camera2.CameraManager#turnOnTorchWithStrengthLevel}.</p>
+     */
+    ANDROID_FLASH_INFO_STRENGTH_DEFAULT_LEVEL,
+    /**
+     * android.hotPixel.mode [dynamic, enum, public]
+     *
+     * <p>Operational mode for hot pixel correction.</p>
+     */
+    ANDROID_HOT_PIXEL_MODE = CameraMetadataSectionStart.ANDROID_HOT_PIXEL_START,
+    /**
+     * android.hotPixel.availableHotPixelModes [static, byte[], public]
+     *
+     * <p>List of hot pixel correction modes for ANDROID_HOT_PIXEL_MODE that are supported by this
+     * camera device.</p>
+     *
+     * @see ANDROID_HOT_PIXEL_MODE
+     */
+    ANDROID_HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES,
+    /**
+     * android.jpeg.gpsCoordinates [dynamic, double[], ndk_public]
+     *
+     * <p>GPS coordinates to include in output JPEG
+     * EXIF.</p>
+     */
+    ANDROID_JPEG_GPS_COORDINATES = CameraMetadataSectionStart.ANDROID_JPEG_START,
+    /**
+     * android.jpeg.gpsProcessingMethod [dynamic, byte, ndk_public]
+     *
+     * <p>32 characters describing GPS algorithm to
+     * include in EXIF.</p>
+     */
+    ANDROID_JPEG_GPS_PROCESSING_METHOD,
+    /**
+     * android.jpeg.gpsTimestamp [dynamic, int64, ndk_public]
+     *
+     * <p>Time GPS fix was made to include in
+     * EXIF.</p>
+     */
+    ANDROID_JPEG_GPS_TIMESTAMP,
+    /**
+     * android.jpeg.orientation [dynamic, int32, public]
+     *
+     * <p>The orientation for a JPEG image.</p>
+     */
+    ANDROID_JPEG_ORIENTATION,
+    /**
+     * android.jpeg.quality [dynamic, byte, public]
+     *
+     * <p>Compression quality of the final JPEG
+     * image.</p>
+     */
+    ANDROID_JPEG_QUALITY,
+    /**
+     * android.jpeg.thumbnailQuality [dynamic, byte, public]
+     *
+     * <p>Compression quality of JPEG
+     * thumbnail.</p>
+     */
+    ANDROID_JPEG_THUMBNAIL_QUALITY,
+    /**
+     * android.jpeg.thumbnailSize [dynamic, int32[], public]
+     *
+     * <p>Resolution of embedded JPEG thumbnail.</p>
+     */
+    ANDROID_JPEG_THUMBNAIL_SIZE,
+    /**
+     * android.jpeg.availableThumbnailSizes [static, int32[], public]
+     *
+     * <p>List of JPEG thumbnail sizes for ANDROID_JPEG_THUMBNAIL_SIZE supported by this
+     * camera device.</p>
+     *
+     * @see ANDROID_JPEG_THUMBNAIL_SIZE
+     */
+    ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES,
+    /**
+     * android.jpeg.maxSize [static, int32, system]
+     *
+     * <p>Maximum size in bytes for the compressed
+     * JPEG buffer, in default sensor pixel mode (see ANDROID_SENSOR_PIXEL_MODE)</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_JPEG_MAX_SIZE,
+    /**
+     * android.jpeg.size [dynamic, int32, system]
+     *
+     * <p>The size of the compressed JPEG image, in
+     * bytes</p>
+     */
+    ANDROID_JPEG_SIZE,
+    /**
+     * android.lens.aperture [dynamic, float, public]
+     *
+     * <p>The desired lens aperture size, as a ratio of lens focal length to the
+     * effective aperture diameter.</p>
+     */
+    ANDROID_LENS_APERTURE = CameraMetadataSectionStart.ANDROID_LENS_START,
+    /**
+     * android.lens.filterDensity [dynamic, float, public]
+     *
+     * <p>The desired setting for the lens neutral density filter(s).</p>
+     */
+    ANDROID_LENS_FILTER_DENSITY,
+    /**
+     * android.lens.focalLength [dynamic, float, public]
+     *
+     * <p>The desired lens focal length; used for optical zoom.</p>
+     */
+    ANDROID_LENS_FOCAL_LENGTH,
+    /**
+     * android.lens.focusDistance [dynamic, float, public]
+     *
+     * <p>Desired distance to plane of sharpest focus,
+     * measured from frontmost surface of the lens.</p>
+     */
+    ANDROID_LENS_FOCUS_DISTANCE,
+    /**
+     * android.lens.opticalStabilizationMode [dynamic, enum, public]
+     *
+     * <p>Sets whether the camera device uses optical image stabilization (OIS)
+     * when capturing images.</p>
+     */
+    ANDROID_LENS_OPTICAL_STABILIZATION_MODE,
+    /**
+     * android.lens.facing [static, enum, public]
+     *
+     * <p>Direction the camera faces relative to
+     * device screen.</p>
+     */
+    ANDROID_LENS_FACING,
+    /**
+     * android.lens.poseRotation [dynamic, float[], public]
+     *
+     * <p>The orientation of the camera relative to the sensor
+     * coordinate system.</p>
+     */
+    ANDROID_LENS_POSE_ROTATION,
+    /**
+     * android.lens.poseTranslation [dynamic, float[], public]
+     *
+     * <p>Position of the camera optical center.</p>
+     */
+    ANDROID_LENS_POSE_TRANSLATION,
+    /**
+     * android.lens.focusRange [dynamic, float[], public]
+     *
+     * <p>The range of scene distances that are in
+     * sharp focus (depth of field).</p>
+     */
+    ANDROID_LENS_FOCUS_RANGE,
+    /**
+     * android.lens.state [dynamic, enum, public]
+     *
+     * <p>Current lens status.</p>
+     */
+    ANDROID_LENS_STATE,
+    /**
+     * android.lens.intrinsicCalibration [dynamic, float[], public]
+     *
+     * <p>The parameters for this camera device's intrinsic
+     * calibration.</p>
+     */
+    ANDROID_LENS_INTRINSIC_CALIBRATION,
+    /**
+     * android.lens.radialDistortion [dynamic, float[], public]
+     *
+     * <p>The correction coefficients to correct for this camera device's
+     * radial and tangential lens distortion.</p>
+     */
+    ANDROID_LENS_RADIAL_DISTORTION,
+    /**
+     * android.lens.poseReference [static, enum, public]
+     *
+     * <p>The origin for ANDROID_LENS_POSE_TRANSLATION, and the accuracy of
+     * ANDROID_LENS_POSE_TRANSLATION and ANDROID_LENS_POSE_ROTATION.</p>
+     *
+     * @see ANDROID_LENS_POSE_ROTATION
+     * @see ANDROID_LENS_POSE_TRANSLATION
+     */
+    ANDROID_LENS_POSE_REFERENCE,
+    /**
+     * android.lens.distortion [dynamic, float[], public]
+     *
+     * <p>The correction coefficients to correct for this camera device's
+     * radial and tangential lens distortion.</p>
+     * <p>Replaces the deprecated ANDROID_LENS_RADIAL_DISTORTION field, which was
+     * inconsistently defined.</p>
+     *
+     * @see ANDROID_LENS_RADIAL_DISTORTION
+     */
+    ANDROID_LENS_DISTORTION,
+    /**
+     * android.lens.distortionMaximumResolution [static, float[], public]
+     *
+     * <p>The correction coefficients to correct for this camera device's
+     * radial and tangential lens distortion for a
+     * CaptureRequest with ANDROID_SENSOR_PIXEL_MODE set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_LENS_DISTORTION_MAXIMUM_RESOLUTION,
+    /**
+     * android.lens.intrinsicCalibrationMaximumResolution [static, float[], public]
+     *
+     * <p>The parameters for this camera device's intrinsic
+     * calibration when ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_LENS_INTRINSIC_CALIBRATION_MAXIMUM_RESOLUTION,
+    /**
+     * android.lens.info.availableApertures [static, float[], public]
+     *
+     * <p>List of aperture size values for ANDROID_LENS_APERTURE that are
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_LENS_APERTURE
+     */
+    ANDROID_LENS_INFO_AVAILABLE_APERTURES = CameraMetadataSectionStart.ANDROID_LENS_INFO_START,
+    /**
+     * android.lens.info.availableFilterDensities [static, float[], public]
+     *
+     * <p>List of neutral density filter values for
+     * ANDROID_LENS_FILTER_DENSITY that are supported by this camera device.</p>
+     *
+     * @see ANDROID_LENS_FILTER_DENSITY
+     */
+    ANDROID_LENS_INFO_AVAILABLE_FILTER_DENSITIES,
+    /**
+     * android.lens.info.availableFocalLengths [static, float[], public]
+     *
+     * <p>List of focal lengths for ANDROID_LENS_FOCAL_LENGTH that are supported by this camera
+     * device.</p>
+     *
+     * @see ANDROID_LENS_FOCAL_LENGTH
+     */
+    ANDROID_LENS_INFO_AVAILABLE_FOCAL_LENGTHS,
+    /**
+     * android.lens.info.availableOpticalStabilization [static, byte[], public]
+     *
+     * <p>List of optical image stabilization (OIS) modes for
+     * ANDROID_LENS_OPTICAL_STABILIZATION_MODE that are supported by this camera device.</p>
+     *
+     * @see ANDROID_LENS_OPTICAL_STABILIZATION_MODE
+     */
+    ANDROID_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION,
+    /**
+     * android.lens.info.hyperfocalDistance [static, float, public]
+     *
+     * <p>Hyperfocal distance for this lens.</p>
+     */
+    ANDROID_LENS_INFO_HYPERFOCAL_DISTANCE,
+    /**
+     * android.lens.info.minimumFocusDistance [static, float, public]
+     *
+     * <p>Shortest distance from frontmost surface
+     * of the lens that can be brought into sharp focus.</p>
+     */
+    ANDROID_LENS_INFO_MINIMUM_FOCUS_DISTANCE,
+    /**
+     * android.lens.info.shadingMapSize [static, int32[], ndk_public]
+     *
+     * <p>Dimensions of lens shading map.</p>
+     */
+    ANDROID_LENS_INFO_SHADING_MAP_SIZE,
+    /**
+     * android.lens.info.focusDistanceCalibration [static, enum, public]
+     *
+     * <p>The lens focus distance calibration quality.</p>
+     */
+    ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION,
+    /**
+     * android.noiseReduction.mode [dynamic, enum, public]
+     *
+     * <p>Mode of operation for the noise reduction algorithm.</p>
+     */
+    ANDROID_NOISE_REDUCTION_MODE = CameraMetadataSectionStart.ANDROID_NOISE_REDUCTION_START,
+    /**
+     * android.noiseReduction.strength [controls, byte, system]
+     *
+     * <p>Control the amount of noise reduction
+     * applied to the images</p>
+     */
+    ANDROID_NOISE_REDUCTION_STRENGTH,
+    /**
+     * android.noiseReduction.availableNoiseReductionModes [static, byte[], public]
+     *
+     * <p>List of noise reduction modes for ANDROID_NOISE_REDUCTION_MODE that are supported
+     * by this camera device.</p>
+     *
+     * @see ANDROID_NOISE_REDUCTION_MODE
+     */
+    ANDROID_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES,
+    /**
+     * android.quirks.meteringCropRegion [static, byte, system]
+     *
+     * <p>If set to 1, the camera service does not
+     * scale 'normalized' coordinates with respect to the crop
+     * region. This applies to metering input (a{e,f,wb}Region
+     * and output (face rectangles).</p>
+     */
+    ANDROID_QUIRKS_METERING_CROP_REGION = CameraMetadataSectionStart.ANDROID_QUIRKS_START,
+    /**
+     * android.quirks.triggerAfWithAuto [static, byte, system]
+     *
+     * <p>If set to 1, then the camera service always
+     * switches to FOCUS_MODE_AUTO before issuing a AF
+     * trigger.</p>
+     */
+    ANDROID_QUIRKS_TRIGGER_AF_WITH_AUTO,
+    /**
+     * android.quirks.useZslFormat [static, byte, system]
+     *
+     * <p>If set to 1, the camera service uses
+     * CAMERA2_PIXEL_FORMAT_ZSL instead of
+     * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED for the zero
+     * shutter lag stream</p>
+     */
+    ANDROID_QUIRKS_USE_ZSL_FORMAT,
+    /**
+     * android.quirks.usePartialResult [static, byte, hidden]
+     *
+     * <p>If set to 1, the HAL will always split result
+     * metadata for a single capture into multiple buffers,
+     * returned using multiple process_capture_result calls.</p>
+     */
+    ANDROID_QUIRKS_USE_PARTIAL_RESULT,
+    /**
+     * android.quirks.partialResult [dynamic, enum, hidden]
+     *
+     * <p>Whether a result given to the framework is the
+     * final one for the capture, or only a partial that contains a
+     * subset of the full set of dynamic metadata
+     * values.</p>
+     */
+    ANDROID_QUIRKS_PARTIAL_RESULT,
+    /**
+     * android.request.frameCount [dynamic, int32, hidden]
+     *
+     * <p>A frame counter set by the framework. This value monotonically
+     * increases with every new result (that is, each new result has a unique
+     * frameCount value).</p>
+     */
+    ANDROID_REQUEST_FRAME_COUNT = CameraMetadataSectionStart.ANDROID_REQUEST_START,
+    /**
+     * android.request.id [dynamic, int32, hidden]
+     *
+     * <p>An application-specified ID for the current
+     * request. Must be maintained unchanged in output
+     * frame</p>
+     */
+    ANDROID_REQUEST_ID,
+    /**
+     * android.request.inputStreams [controls, int32[], system]
+     *
+     * <p>List which camera reprocess stream is used
+     * for the source of reprocessing data.</p>
+     */
+    ANDROID_REQUEST_INPUT_STREAMS,
+    /**
+     * android.request.metadataMode [dynamic, enum, system]
+     *
+     * <p>How much metadata to produce on
+     * output</p>
+     */
+    ANDROID_REQUEST_METADATA_MODE,
+    /**
+     * android.request.outputStreams [dynamic, int32[], system]
+     *
+     * <p>Lists which camera output streams image data
+     * from this capture must be sent to</p>
+     */
+    ANDROID_REQUEST_OUTPUT_STREAMS,
+    /**
+     * android.request.type [controls, enum, system]
+     *
+     * <p>The type of the request; either CAPTURE or
+     * REPROCESS. For legacy HAL3, this tag is redundant.</p>
+     */
+    ANDROID_REQUEST_TYPE,
+    /**
+     * android.request.maxNumOutputStreams [static, int32[], ndk_public]
+     *
+     * <p>The maximum numbers of different types of output streams
+     * that can be configured and used simultaneously by a camera device.</p>
+     */
+    ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS,
+    /**
+     * android.request.maxNumReprocessStreams [static, int32[], system]
+     *
+     * <p>How many reprocessing streams of any type
+     * can be allocated at the same time.</p>
+     */
+    ANDROID_REQUEST_MAX_NUM_REPROCESS_STREAMS,
+    /**
+     * android.request.maxNumInputStreams [static, int32, java_public]
+     *
+     * <p>The maximum numbers of any type of input streams
+     * that can be configured and used simultaneously by a camera device.</p>
+     */
+    ANDROID_REQUEST_MAX_NUM_INPUT_STREAMS,
+    /**
+     * android.request.pipelineDepth [dynamic, byte, public]
+     *
+     * <p>Specifies the number of pipeline stages the frame went
+     * through from when it was exposed to when the final completed result
+     * was available to the framework.</p>
+     */
+    ANDROID_REQUEST_PIPELINE_DEPTH,
+    /**
+     * android.request.pipelineMaxDepth [static, byte, public]
+     *
+     * <p>Specifies the number of maximum pipeline stages a frame
+     * has to go through from when it's exposed to when it's available
+     * to the framework.</p>
+     */
+    ANDROID_REQUEST_PIPELINE_MAX_DEPTH,
+    /**
+     * android.request.partialResultCount [static, int32, public]
+     *
+     * <p>Defines how many sub-components
+     * a result will be composed of.</p>
+     */
+    ANDROID_REQUEST_PARTIAL_RESULT_COUNT,
+    /**
+     * android.request.availableCapabilities [static, enum[], public]
+     *
+     * <p>List of capabilities that this camera device
+     * advertises as fully supporting.</p>
+     */
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES,
+    /**
+     * android.request.availableRequestKeys [static, int32[], ndk_public]
+     *
+     * <p>A list of all keys that the camera device has available
+     * to use with {@link ACaptureRequest }.</p>
+     */
+    ANDROID_REQUEST_AVAILABLE_REQUEST_KEYS,
+    /**
+     * android.request.availableResultKeys [static, int32[], ndk_public]
+     *
+     * <p>A list of all keys that the camera device has available to use with {@link ACameraCaptureSession_captureCallback_result }.</p>
+     */
+    ANDROID_REQUEST_AVAILABLE_RESULT_KEYS,
+    /**
+     * android.request.availableCharacteristicsKeys [static, int32[], ndk_public]
+     *
+     * <p>A list of all keys that the camera device has available to use with {@link ACameraManager_getCameraCharacteristics }.</p>
+     */
+    ANDROID_REQUEST_AVAILABLE_CHARACTERISTICS_KEYS,
+    /**
+     * android.request.availableSessionKeys [static, int32[], ndk_public]
+     *
+     * <p>A subset of the available request keys that the camera device
+     * can pass as part of the capture session initialization.</p>
+     */
+    ANDROID_REQUEST_AVAILABLE_SESSION_KEYS,
+    /**
+     * android.request.availablePhysicalCameraRequestKeys [static, int32[], ndk_public]
+     *
+     * <p>A subset of the available request keys that can be overridden for
+     * physical devices backing a logical multi-camera.</p>
+     */
+    ANDROID_REQUEST_AVAILABLE_PHYSICAL_CAMERA_REQUEST_KEYS,
+    /**
+     * android.request.characteristicKeysNeedingPermission [static, int32[], hidden]
+     *
+     * <p>A list of camera characteristics keys that are only available
+     * in case the camera client has camera permission.</p>
+     */
+    ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION,
+    /**
+     * android.request.availableDynamicRangeProfilesMap [static, enum[], ndk_public]
+     *
+     * <p>A map of all available 10-bit dynamic range profiles along with their
+     * capture request constraints.</p>
+     */
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP,
+    /**
+     * android.request.recommendedTenBitDynamicRangeProfile [static, int32, java_public]
+     *
+     * <p>Recommended 10-bit dynamic range profile.</p>
+     */
+    ANDROID_REQUEST_RECOMMENDED_TEN_BIT_DYNAMIC_RANGE_PROFILE,
+    /**
+     * android.scaler.cropRegion [dynamic, int32[], public]
+     *
+     * <p>The desired region of the sensor to read out for this capture.</p>
+     */
+    ANDROID_SCALER_CROP_REGION = CameraMetadataSectionStart.ANDROID_SCALER_START,
+    /**
+     * android.scaler.availableFormats [static, enum[], hidden]
+     *
+     * <p>The list of image formats that are supported by this
+     * camera device for output streams.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_FORMATS,
+    /**
+     * android.scaler.availableJpegMinDurations [static, int64[], hidden]
+     *
+     * <p>The minimum frame duration that is supported
+     * for each resolution in ANDROID_SCALER_AVAILABLE_JPEG_SIZES.</p>
+     *
+     * @see ANDROID_SCALER_AVAILABLE_JPEG_SIZES
+     */
+    ANDROID_SCALER_AVAILABLE_JPEG_MIN_DURATIONS,
+    /**
+     * android.scaler.availableJpegSizes [static, int32[], hidden]
+     *
+     * <p>The JPEG resolutions that are supported by this camera device.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_JPEG_SIZES,
+    /**
+     * android.scaler.availableMaxDigitalZoom [static, float, public]
+     *
+     * <p>The maximum ratio between both active area width
+     * and crop region width, and active area height and
+     * crop region height, for ANDROID_SCALER_CROP_REGION.</p>
+     *
+     * @see ANDROID_SCALER_CROP_REGION
+     */
+    ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM,
+    /**
+     * android.scaler.availableProcessedMinDurations [static, int64[], hidden]
+     *
+     * <p>For each available processed output size (defined in
+     * ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES), this property lists the
+     * minimum supportable frame duration for that size.</p>
+     *
+     * @see ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES
+     */
+    ANDROID_SCALER_AVAILABLE_PROCESSED_MIN_DURATIONS,
+    /**
+     * android.scaler.availableProcessedSizes [static, int32[], hidden]
+     *
+     * <p>The resolutions available for use with
+     * processed output streams, such as YV12, NV12, and
+     * platform opaque YUV/RGB streams to the GPU or video
+     * encoders.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES,
+    /**
+     * android.scaler.availableRawMinDurations [static, int64[], system]
+     *
+     * <p>For each available raw output size (defined in
+     * ANDROID_SCALER_AVAILABLE_RAW_SIZES), this property lists the minimum
+     * supportable frame duration for that size.</p>
+     *
+     * @see ANDROID_SCALER_AVAILABLE_RAW_SIZES
+     */
+    ANDROID_SCALER_AVAILABLE_RAW_MIN_DURATIONS,
+    /**
+     * android.scaler.availableRawSizes [static, int32[], system]
+     *
+     * <p>The resolutions available for use with raw
+     * sensor output streams, listed as width,
+     * height</p>
+     */
+    ANDROID_SCALER_AVAILABLE_RAW_SIZES,
+    /**
+     * android.scaler.availableInputOutputFormatsMap [static, int32, hidden]
+     *
+     * <p>The mapping of image formats that are supported by this
+     * camera device for input streams, to their corresponding output formats.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_INPUT_OUTPUT_FORMATS_MAP,
+    /**
+     * android.scaler.availableStreamConfigurations [static, enum[], ndk_public]
+     *
+     * <p>The available stream configurations that this
+     * camera device supports
+     * (i.e. format, width, height, output/input stream).</p>
+     */
+    ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS,
+    /**
+     * android.scaler.availableMinFrameDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS,
+    /**
+     * android.scaler.availableStallDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_STALL_DURATIONS,
+    /**
+     * android.scaler.croppingType [static, enum, public]
+     *
+     * <p>The crop type that this camera device supports.</p>
+     */
+    ANDROID_SCALER_CROPPING_TYPE,
+    /**
+     * android.scaler.availableRecommendedStreamConfigurations [static, enum[], ndk_public]
+     *
+     * <p>Recommended stream configurations for common client use cases.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS,
+    /**
+     * android.scaler.availableRecommendedInputOutputFormatsMap [static, int32, ndk_public]
+     *
+     * <p>Recommended mappings of image formats that are supported by this
+     * camera device for input streams, to their corresponding output formats.</p>
+     */
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_INPUT_OUTPUT_FORMATS_MAP,
+    /**
+     * android.scaler.availableRotateAndCropModes [static, byte[], public]
+     *
+     * <p>List of rotate-and-crop modes for ANDROID_SCALER_ROTATE_AND_CROP that are supported by this camera device.</p>
+     *
+     * @see ANDROID_SCALER_ROTATE_AND_CROP
+     */
+    ANDROID_SCALER_AVAILABLE_ROTATE_AND_CROP_MODES,
+    /**
+     * android.scaler.defaultSecureImageSize [static, int32[], public]
+     *
+     * <p>Default YUV/PRIVATE size to use for requesting secure image buffers.</p>
+     */
+    ANDROID_SCALER_DEFAULT_SECURE_IMAGE_SIZE,
+    /**
+     * android.scaler.physicalCameraMultiResolutionStreamConfigurations [static, enum[], ndk_public]
+     *
+     * <p>The available multi-resolution stream configurations that this
+     * physical camera device supports
+     * (i.e. format, width, height, output/input stream).</p>
+     */
+    ANDROID_SCALER_PHYSICAL_CAMERA_MULTI_RESOLUTION_STREAM_CONFIGURATIONS,
+    /**
+     * android.scaler.availableStreamConfigurationsMaximumResolution [static, enum[], ndk_public]
+     *
+     * <p>The available stream configurations that this
+     * camera device supports (i.e. format, width, height, output/input stream) for a
+     * CaptureRequest with ANDROID_SENSOR_PIXEL_MODE set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.scaler.availableMinFrameDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination when the camera device is sent a CaptureRequest with
+     * ANDROID_SENSOR_PIXEL_MODE set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.scaler.availableStallDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination when CaptureRequests are submitted with
+     * ANDROID_SENSOR_PIXEL_MODE set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a></p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_SCALER_AVAILABLE_STALL_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.scaler.availableInputOutputFormatsMapMaximumResolution [static, int32, hidden]
+     *
+     * <p>The mapping of image formats that are supported by this
+     * camera device for input streams, to their corresponding output formats, when
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_SCALER_AVAILABLE_INPUT_OUTPUT_FORMATS_MAP_MAXIMUM_RESOLUTION,
+    /**
+     * android.scaler.multiResolutionStreamSupported [static, enum, ndk_public]
+     *
+     * <p>Whether the camera device supports multi-resolution input or output streams</p>
+     */
+    ANDROID_SCALER_MULTI_RESOLUTION_STREAM_SUPPORTED,
+    /**
+     * android.sensor.exposureTime [dynamic, int64, public]
+     *
+     * <p>Duration each pixel is exposed to
+     * light.</p>
+     */
+    ANDROID_SENSOR_EXPOSURE_TIME = CameraMetadataSectionStart.ANDROID_SENSOR_START,
+    /**
+     * android.sensor.frameDuration [dynamic, int64, public]
+     *
+     * <p>Duration from start of frame exposure to
+     * start of next frame exposure.</p>
+     */
+    ANDROID_SENSOR_FRAME_DURATION,
+    /**
+     * android.sensor.sensitivity [dynamic, int32, public]
+     *
+     * <p>The amount of gain applied to sensor data
+     * before processing.</p>
+     */
+    ANDROID_SENSOR_SENSITIVITY,
+    /**
+     * android.sensor.referenceIlluminant1 [static, enum, public]
+     *
+     * <p>The standard reference illuminant used as the scene light source when
+     * calculating the ANDROID_SENSOR_COLOR_TRANSFORM1,
+     * ANDROID_SENSOR_CALIBRATION_TRANSFORM1, and
+     * ANDROID_SENSOR_FORWARD_MATRIX1 matrices.</p>
+     *
+     * @see ANDROID_SENSOR_CALIBRATION_TRANSFORM1
+     * @see ANDROID_SENSOR_COLOR_TRANSFORM1
+     * @see ANDROID_SENSOR_FORWARD_MATRIX1
+     */
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1,
+    /**
+     * android.sensor.referenceIlluminant2 [static, byte, public]
+     *
+     * <p>The standard reference illuminant used as the scene light source when
+     * calculating the ANDROID_SENSOR_COLOR_TRANSFORM2,
+     * ANDROID_SENSOR_CALIBRATION_TRANSFORM2, and
+     * ANDROID_SENSOR_FORWARD_MATRIX2 matrices.</p>
+     *
+     * @see ANDROID_SENSOR_CALIBRATION_TRANSFORM2
+     * @see ANDROID_SENSOR_COLOR_TRANSFORM2
+     * @see ANDROID_SENSOR_FORWARD_MATRIX2
+     */
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT2,
+    /**
+     * android.sensor.calibrationTransform1 [static, rational[], public]
+     *
+     * <p>A per-device calibration transform matrix that maps from the
+     * reference sensor colorspace to the actual device sensor colorspace.</p>
+     */
+    ANDROID_SENSOR_CALIBRATION_TRANSFORM1,
+    /**
+     * android.sensor.calibrationTransform2 [static, rational[], public]
+     *
+     * <p>A per-device calibration transform matrix that maps from the
+     * reference sensor colorspace to the actual device sensor colorspace
+     * (this is the colorspace of the raw buffer data).</p>
+     */
+    ANDROID_SENSOR_CALIBRATION_TRANSFORM2,
+    /**
+     * android.sensor.colorTransform1 [static, rational[], public]
+     *
+     * <p>A matrix that transforms color values from CIE XYZ color space to
+     * reference sensor color space.</p>
+     */
+    ANDROID_SENSOR_COLOR_TRANSFORM1,
+    /**
+     * android.sensor.colorTransform2 [static, rational[], public]
+     *
+     * <p>A matrix that transforms color values from CIE XYZ color space to
+     * reference sensor color space.</p>
+     */
+    ANDROID_SENSOR_COLOR_TRANSFORM2,
+    /**
+     * android.sensor.forwardMatrix1 [static, rational[], public]
+     *
+     * <p>A matrix that transforms white balanced camera colors from the reference
+     * sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.</p>
+     */
+    ANDROID_SENSOR_FORWARD_MATRIX1,
+    /**
+     * android.sensor.forwardMatrix2 [static, rational[], public]
+     *
+     * <p>A matrix that transforms white balanced camera colors from the reference
+     * sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.</p>
+     */
+    ANDROID_SENSOR_FORWARD_MATRIX2,
+    /**
+     * android.sensor.baseGainFactor [static, rational, system]
+     *
+     * <p>Gain factor from electrons to raw units when
+     * ISO=100</p>
+     */
+    ANDROID_SENSOR_BASE_GAIN_FACTOR,
+    /**
+     * android.sensor.blackLevelPattern [static, int32[], public]
+     *
+     * <p>A fixed black level offset for each of the color filter arrangement
+     * (CFA) mosaic channels.</p>
+     */
+    ANDROID_SENSOR_BLACK_LEVEL_PATTERN,
+    /**
+     * android.sensor.maxAnalogSensitivity [static, int32, public]
+     *
+     * <p>Maximum sensitivity that is implemented
+     * purely through analog gain.</p>
+     */
+    ANDROID_SENSOR_MAX_ANALOG_SENSITIVITY,
+    /**
+     * android.sensor.orientation [static, int32, public]
+     *
+     * <p>Clockwise angle through which the output image needs to be rotated to be
+     * upright on the device screen in its native orientation.</p>
+     */
+    ANDROID_SENSOR_ORIENTATION,
+    /**
+     * android.sensor.profileHueSatMapDimensions [static, int32[], system]
+     *
+     * <p>The number of input samples for each dimension of
+     * ANDROID_SENSOR_PROFILE_HUE_SAT_MAP.</p>
+     *
+     * @see ANDROID_SENSOR_PROFILE_HUE_SAT_MAP
+     */
+    ANDROID_SENSOR_PROFILE_HUE_SAT_MAP_DIMENSIONS,
+    /**
+     * android.sensor.timestamp [dynamic, int64, public]
+     *
+     * <p>Time at start of exposure of first
+     * row of the image sensor active array, in nanoseconds.</p>
+     */
+    ANDROID_SENSOR_TIMESTAMP,
+    /**
+     * android.sensor.temperature [dynamic, float, system]
+     *
+     * <p>The temperature of the sensor, sampled at the time
+     * exposure began for this frame.</p>
+     * <p>The thermal diode being queried should be inside the sensor PCB, or
+     * somewhere close to it.</p>
+     */
+    ANDROID_SENSOR_TEMPERATURE,
+    /**
+     * android.sensor.neutralColorPoint [dynamic, rational[], public]
+     *
+     * <p>The estimated camera neutral color in the native sensor colorspace at
+     * the time of capture.</p>
+     */
+    ANDROID_SENSOR_NEUTRAL_COLOR_POINT,
+    /**
+     * android.sensor.noiseProfile [dynamic, double[], public]
+     *
+     * <p>Noise model coefficients for each CFA mosaic channel.</p>
+     */
+    ANDROID_SENSOR_NOISE_PROFILE,
+    /**
+     * android.sensor.profileHueSatMap [dynamic, float[], system]
+     *
+     * <p>A mapping containing a hue shift, saturation scale, and value scale
+     * for each pixel.</p>
+     */
+    ANDROID_SENSOR_PROFILE_HUE_SAT_MAP,
+    /**
+     * android.sensor.profileToneCurve [dynamic, float[], system]
+     *
+     * <p>A list of x,y samples defining a tone-mapping curve for gamma adjustment.</p>
+     */
+    ANDROID_SENSOR_PROFILE_TONE_CURVE,
+    /**
+     * android.sensor.greenSplit [dynamic, float, public]
+     *
+     * <p>The worst-case divergence between Bayer green channels.</p>
+     */
+    ANDROID_SENSOR_GREEN_SPLIT,
+    /**
+     * android.sensor.testPatternData [dynamic, int32[], public]
+     *
+     * <p>A pixel <code>[R, G_even, G_odd, B]</code> that supplies the test pattern
+     * when ANDROID_SENSOR_TEST_PATTERN_MODE is SOLID_COLOR.</p>
+     *
+     * @see ANDROID_SENSOR_TEST_PATTERN_MODE
+     */
+    ANDROID_SENSOR_TEST_PATTERN_DATA,
+    /**
+     * android.sensor.testPatternMode [dynamic, enum, public]
+     *
+     * <p>When enabled, the sensor sends a test pattern instead of
+     * doing a real exposure from the camera.</p>
+     */
+    ANDROID_SENSOR_TEST_PATTERN_MODE,
+    /**
+     * android.sensor.availableTestPatternModes [static, int32[], public]
+     *
+     * <p>List of sensor test pattern modes for ANDROID_SENSOR_TEST_PATTERN_MODE
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_SENSOR_TEST_PATTERN_MODE
+     */
+    ANDROID_SENSOR_AVAILABLE_TEST_PATTERN_MODES,
+    /**
+     * android.sensor.rollingShutterSkew [dynamic, int64, public]
+     *
+     * <p>Duration between the start of exposure for the first row of the image sensor,
+     * and the start of exposure for one past the last row of the image sensor.</p>
+     */
+    ANDROID_SENSOR_ROLLING_SHUTTER_SKEW,
+    /**
+     * android.sensor.opticalBlackRegions [static, int32[], public]
+     *
+     * <p>List of disjoint rectangles indicating the sensor
+     * optically shielded black pixel regions.</p>
+     */
+    ANDROID_SENSOR_OPTICAL_BLACK_REGIONS,
+    /**
+     * android.sensor.dynamicBlackLevel [dynamic, float[], public]
+     *
+     * <p>A per-frame dynamic black level offset for each of the color filter
+     * arrangement (CFA) mosaic channels.</p>
+     */
+    ANDROID_SENSOR_DYNAMIC_BLACK_LEVEL,
+    /**
+     * android.sensor.dynamicWhiteLevel [dynamic, int32, public]
+     *
+     * <p>Maximum raw value output by sensor for this frame.</p>
+     */
+    ANDROID_SENSOR_DYNAMIC_WHITE_LEVEL,
+    /**
+     * android.sensor.opaqueRawSize [static, int32[], system]
+     *
+     * <p>Size in bytes for all the listed opaque RAW buffer sizes</p>
+     */
+    ANDROID_SENSOR_OPAQUE_RAW_SIZE,
+    /**
+     * android.sensor.opaqueRawSizeMaximumResolution [static, int32[], system]
+     *
+     * <p>Size in bytes for all the listed opaque RAW buffer sizes when
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_SENSOR_OPAQUE_RAW_SIZE_MAXIMUM_RESOLUTION,
+    /**
+     * android.sensor.pixelMode [dynamic, enum, public]
+     *
+     * <p>Switches sensor pixel mode between maximum resolution mode and default mode.</p>
+     */
+    ANDROID_SENSOR_PIXEL_MODE,
+    /**
+     * android.sensor.rawBinningFactorUsed [dynamic, enum, public]
+     *
+     * <p>Whether <code>RAW</code> images requested have their bayer pattern as described by
+     * ANDROID_SENSOR_INFO_BINNING_FACTOR.</p>
+     *
+     * @see ANDROID_SENSOR_INFO_BINNING_FACTOR
+     */
+    ANDROID_SENSOR_RAW_BINNING_FACTOR_USED,
+    /**
+     * android.sensor.info.activeArraySize [static, int32[], public]
+     *
+     * <p>The area of the image sensor which corresponds to active pixels after any geometric
+     * distortion correction has been applied.</p>
+     */
+    ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE = CameraMetadataSectionStart.ANDROID_SENSOR_INFO_START,
+    /**
+     * android.sensor.info.sensitivityRange [static, int32[], public]
+     *
+     * <p>Range of sensitivities for ANDROID_SENSOR_SENSITIVITY supported by this
+     * camera device.</p>
+     *
+     * @see ANDROID_SENSOR_SENSITIVITY
+     */
+    ANDROID_SENSOR_INFO_SENSITIVITY_RANGE,
+    /**
+     * android.sensor.info.colorFilterArrangement [static, enum, public]
+     *
+     * <p>The arrangement of color filters on sensor;
+     * represents the colors in the top-left 2x2 section of
+     * the sensor, in reading order, for a Bayer camera, or the
+     * light spectrum it captures for MONOCHROME camera.</p>
+     */
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT,
+    /**
+     * android.sensor.info.exposureTimeRange [static, int64[], public]
+     *
+     * <p>The range of image exposure times for ANDROID_SENSOR_EXPOSURE_TIME supported
+     * by this camera device.</p>
+     *
+     * @see ANDROID_SENSOR_EXPOSURE_TIME
+     */
+    ANDROID_SENSOR_INFO_EXPOSURE_TIME_RANGE,
+    /**
+     * android.sensor.info.maxFrameDuration [static, int64, public]
+     *
+     * <p>The maximum possible frame duration (minimum frame rate) for
+     * ANDROID_SENSOR_FRAME_DURATION that is supported this camera device.</p>
+     *
+     * @see ANDROID_SENSOR_FRAME_DURATION
+     */
+    ANDROID_SENSOR_INFO_MAX_FRAME_DURATION,
+    /**
+     * android.sensor.info.physicalSize [static, float[], public]
+     *
+     * <p>The physical dimensions of the full pixel
+     * array.</p>
+     */
+    ANDROID_SENSOR_INFO_PHYSICAL_SIZE,
+    /**
+     * android.sensor.info.pixelArraySize [static, int32[], public]
+     *
+     * <p>Dimensions of the full pixel array, possibly
+     * including black calibration pixels.</p>
+     */
+    ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE,
+    /**
+     * android.sensor.info.whiteLevel [static, int32, public]
+     *
+     * <p>Maximum raw value output by sensor.</p>
+     */
+    ANDROID_SENSOR_INFO_WHITE_LEVEL,
+    /**
+     * android.sensor.info.timestampSource [static, enum, public]
+     *
+     * <p>The time base source for sensor capture start timestamps.</p>
+     */
+    ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE,
+    /**
+     * android.sensor.info.lensShadingApplied [static, enum, public]
+     *
+     * <p>Whether the RAW images output from this camera device are subject to
+     * lens shading correction.</p>
+     */
+    ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED,
+    /**
+     * android.sensor.info.preCorrectionActiveArraySize [static, int32[], public]
+     *
+     * <p>The area of the image sensor which corresponds to active pixels prior to the
+     * application of any geometric distortion correction.</p>
+     */
+    ANDROID_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE,
+    /**
+     * android.sensor.info.activeArraySizeMaximumResolution [static, int32[], public]
+     *
+     * <p>The area of the image sensor which corresponds to active pixels after any geometric
+     * distortion correction has been applied, when the sensor runs in maximum resolution mode.</p>
+     */
+    ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE_MAXIMUM_RESOLUTION,
+    /**
+     * android.sensor.info.pixelArraySizeMaximumResolution [static, int32[], public]
+     *
+     * <p>Dimensions of the full pixel array, possibly
+     * including black calibration pixels, when the sensor runs in maximum resolution mode.
+     * Analogous to ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE, when ANDROID_SENSOR_PIXEL_MODE is
+     * set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE_MAXIMUM_RESOLUTION,
+    /**
+     * android.sensor.info.preCorrectionActiveArraySizeMaximumResolution [static, int32[], public]
+     *
+     * <p>The area of the image sensor which corresponds to active pixels prior to the
+     * application of any geometric distortion correction, when the sensor runs in maximum
+     * resolution mode. This key must be used for crop / metering regions, only when
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE_MAXIMUM_RESOLUTION,
+    /**
+     * android.sensor.info.binningFactor [static, int32[], public]
+     *
+     * <p>Dimensions of the group of pixels which are under the same color filter.
+     * This specifies the width and height (pair of integers) of the group of pixels which fall
+     * under the same color filter for ULTRA_HIGH_RESOLUTION sensors.</p>
+     */
+    ANDROID_SENSOR_INFO_BINNING_FACTOR,
+    /**
+     * android.shading.mode [dynamic, enum, public]
+     *
+     * <p>Quality of lens shading correction applied
+     * to the image data.</p>
+     */
+    ANDROID_SHADING_MODE = CameraMetadataSectionStart.ANDROID_SHADING_START,
+    /**
+     * android.shading.strength [controls, byte, system]
+     *
+     * <p>Control the amount of shading correction
+     * applied to the images</p>
+     */
+    ANDROID_SHADING_STRENGTH,
+    /**
+     * android.shading.availableModes [static, byte[], public]
+     *
+     * <p>List of lens shading modes for ANDROID_SHADING_MODE that are supported by this camera device.</p>
+     *
+     * @see ANDROID_SHADING_MODE
+     */
+    ANDROID_SHADING_AVAILABLE_MODES,
+    /**
+     * android.statistics.faceDetectMode [dynamic, enum, public]
+     *
+     * <p>Operating mode for the face detector
+     * unit.</p>
+     */
+    ANDROID_STATISTICS_FACE_DETECT_MODE = CameraMetadataSectionStart.ANDROID_STATISTICS_START,
+    /**
+     * android.statistics.histogramMode [dynamic, enum, system]
+     *
+     * <p>Operating mode for histogram
+     * generation</p>
+     */
+    ANDROID_STATISTICS_HISTOGRAM_MODE,
+    /**
+     * android.statistics.sharpnessMapMode [dynamic, enum, system]
+     *
+     * <p>Operating mode for sharpness map
+     * generation</p>
+     */
+    ANDROID_STATISTICS_SHARPNESS_MAP_MODE,
+    /**
+     * android.statistics.hotPixelMapMode [dynamic, enum, public]
+     *
+     * <p>Operating mode for hot pixel map generation.</p>
+     */
+    ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE,
+    /**
+     * android.statistics.faceIds [dynamic, int32[], ndk_public]
+     *
+     * <p>List of unique IDs for detected faces.</p>
+     */
+    ANDROID_STATISTICS_FACE_IDS,
+    /**
+     * android.statistics.faceLandmarks [dynamic, int32[], ndk_public]
+     *
+     * <p>List of landmarks for detected
+     * faces.</p>
+     */
+    ANDROID_STATISTICS_FACE_LANDMARKS,
+    /**
+     * android.statistics.faceRectangles [dynamic, int32[], ndk_public]
+     *
+     * <p>List of the bounding rectangles for detected
+     * faces.</p>
+     */
+    ANDROID_STATISTICS_FACE_RECTANGLES,
+    /**
+     * android.statistics.faceScores [dynamic, byte[], ndk_public]
+     *
+     * <p>List of the face confidence scores for
+     * detected faces</p>
+     */
+    ANDROID_STATISTICS_FACE_SCORES,
+    /**
+     * android.statistics.histogram [dynamic, int32[], system]
+     *
+     * <p>A 3-channel histogram based on the raw
+     * sensor data</p>
+     */
+    ANDROID_STATISTICS_HISTOGRAM,
+    /**
+     * android.statistics.sharpnessMap [dynamic, int32[], system]
+     *
+     * <p>A 3-channel sharpness map, based on the raw
+     * sensor data</p>
+     */
+    ANDROID_STATISTICS_SHARPNESS_MAP,
+    /**
+     * android.statistics.lensShadingCorrectionMap [dynamic, byte, java_public]
+     *
+     * <p>The shading map is a low-resolution floating-point map
+     * that lists the coefficients used to correct for vignetting, for each
+     * Bayer color channel.</p>
+     */
+    ANDROID_STATISTICS_LENS_SHADING_CORRECTION_MAP,
+    /**
+     * android.statistics.lensShadingMap [dynamic, float[], ndk_public]
+     *
+     * <p>The shading map is a low-resolution floating-point map
+     * that lists the coefficients used to correct for vignetting and color shading,
+     * for each Bayer color channel of RAW image data.</p>
+     */
+    ANDROID_STATISTICS_LENS_SHADING_MAP,
+    /**
+     * android.statistics.predictedColorGains [dynamic, float[], hidden]
+     *
+     * <p>The best-fit color channel gains calculated
+     * by the camera device's statistics units for the current output frame.</p>
+     */
+    ANDROID_STATISTICS_PREDICTED_COLOR_GAINS,
+    /**
+     * android.statistics.predictedColorTransform [dynamic, rational[], hidden]
+     *
+     * <p>The best-fit color transform matrix estimate
+     * calculated by the camera device's statistics units for the current
+     * output frame.</p>
+     */
+    ANDROID_STATISTICS_PREDICTED_COLOR_TRANSFORM,
+    /**
+     * android.statistics.sceneFlicker [dynamic, enum, public]
+     *
+     * <p>The camera device estimated scene illumination lighting
+     * frequency.</p>
+     */
+    ANDROID_STATISTICS_SCENE_FLICKER,
+    /**
+     * android.statistics.hotPixelMap [dynamic, int32[], public]
+     *
+     * <p>List of <code>(x, y)</code> coordinates of hot/defective pixels on the sensor.</p>
+     */
+    ANDROID_STATISTICS_HOT_PIXEL_MAP,
+    /**
+     * android.statistics.lensShadingMapMode [dynamic, enum, public]
+     *
+     * <p>Whether the camera device will output the lens
+     * shading map in output result metadata.</p>
+     */
+    ANDROID_STATISTICS_LENS_SHADING_MAP_MODE,
+    /**
+     * android.statistics.oisDataMode [dynamic, enum, public]
+     *
+     * <p>A control for selecting whether optical stabilization (OIS) position
+     * information is included in output result metadata.</p>
+     */
+    ANDROID_STATISTICS_OIS_DATA_MODE,
+    /**
+     * android.statistics.oisTimestamps [dynamic, int64[], ndk_public]
+     *
+     * <p>An array of timestamps of OIS samples, in nanoseconds.</p>
+     */
+    ANDROID_STATISTICS_OIS_TIMESTAMPS,
+    /**
+     * android.statistics.oisXShifts [dynamic, float[], ndk_public]
+     *
+     * <p>An array of shifts of OIS samples, in x direction.</p>
+     */
+    ANDROID_STATISTICS_OIS_X_SHIFTS,
+    /**
+     * android.statistics.oisYShifts [dynamic, float[], ndk_public]
+     *
+     * <p>An array of shifts of OIS samples, in y direction.</p>
+     */
+    ANDROID_STATISTICS_OIS_Y_SHIFTS,
+    /**
+     * android.statistics.info.availableFaceDetectModes [static, byte[], public]
+     *
+     * <p>List of face detection modes for ANDROID_STATISTICS_FACE_DETECT_MODE that are
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_STATISTICS_FACE_DETECT_MODE
+     */
+    ANDROID_STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES = CameraMetadataSectionStart.ANDROID_STATISTICS_INFO_START,
+    /**
+     * android.statistics.info.histogramBucketCount [static, int32, system]
+     *
+     * <p>Number of histogram buckets
+     * supported</p>
+     */
+    ANDROID_STATISTICS_INFO_HISTOGRAM_BUCKET_COUNT,
+    /**
+     * android.statistics.info.maxFaceCount [static, int32, public]
+     *
+     * <p>The maximum number of simultaneously detectable
+     * faces.</p>
+     */
+    ANDROID_STATISTICS_INFO_MAX_FACE_COUNT,
+    /**
+     * android.statistics.info.maxHistogramCount [static, int32, system]
+     *
+     * <p>Maximum value possible for a histogram
+     * bucket</p>
+     */
+    ANDROID_STATISTICS_INFO_MAX_HISTOGRAM_COUNT,
+    /**
+     * android.statistics.info.maxSharpnessMapValue [static, int32, system]
+     *
+     * <p>Maximum value possible for a sharpness map
+     * region.</p>
+     */
+    ANDROID_STATISTICS_INFO_MAX_SHARPNESS_MAP_VALUE,
+    /**
+     * android.statistics.info.sharpnessMapSize [static, int32[], system]
+     *
+     * <p>Dimensions of the sharpness
+     * map</p>
+     */
+    ANDROID_STATISTICS_INFO_SHARPNESS_MAP_SIZE,
+    /**
+     * android.statistics.info.availableHotPixelMapModes [static, byte[], public]
+     *
+     * <p>List of hot pixel map output modes for ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE that are
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE
+     */
+    ANDROID_STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES,
+    /**
+     * android.statistics.info.availableLensShadingMapModes [static, byte[], public]
+     *
+     * <p>List of lens shading map output modes for ANDROID_STATISTICS_LENS_SHADING_MAP_MODE that
+     * are supported by this camera device.</p>
+     *
+     * @see ANDROID_STATISTICS_LENS_SHADING_MAP_MODE
+     */
+    ANDROID_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES,
+    /**
+     * android.statistics.info.availableOisDataModes [static, byte[], public]
+     *
+     * <p>List of OIS data output modes for ANDROID_STATISTICS_OIS_DATA_MODE that
+     * are supported by this camera device.</p>
+     *
+     * @see ANDROID_STATISTICS_OIS_DATA_MODE
+     */
+    ANDROID_STATISTICS_INFO_AVAILABLE_OIS_DATA_MODES,
+    /**
+     * android.tonemap.curveBlue [dynamic, float[], ndk_public]
+     *
+     * <p>Tonemapping / contrast / gamma curve for the blue
+     * channel, to use when ANDROID_TONEMAP_MODE is
+     * CONTRAST_CURVE.</p>
+     *
+     * @see ANDROID_TONEMAP_MODE
+     */
+    ANDROID_TONEMAP_CURVE_BLUE = CameraMetadataSectionStart.ANDROID_TONEMAP_START,
+    /**
+     * android.tonemap.curveGreen [dynamic, float[], ndk_public]
+     *
+     * <p>Tonemapping / contrast / gamma curve for the green
+     * channel, to use when ANDROID_TONEMAP_MODE is
+     * CONTRAST_CURVE.</p>
+     *
+     * @see ANDROID_TONEMAP_MODE
+     */
+    ANDROID_TONEMAP_CURVE_GREEN,
+    /**
+     * android.tonemap.curveRed [dynamic, float[], ndk_public]
+     *
+     * <p>Tonemapping / contrast / gamma curve for the red
+     * channel, to use when ANDROID_TONEMAP_MODE is
+     * CONTRAST_CURVE.</p>
+     *
+     * @see ANDROID_TONEMAP_MODE
+     */
+    ANDROID_TONEMAP_CURVE_RED,
+    /**
+     * android.tonemap.mode [dynamic, enum, public]
+     *
+     * <p>High-level global contrast/gamma/tonemapping control.</p>
+     */
+    ANDROID_TONEMAP_MODE,
+    /**
+     * android.tonemap.maxCurvePoints [static, int32, public]
+     *
+     * <p>Maximum number of supported points in the
+     * tonemap curve that can be used for ANDROID_TONEMAP_CURVE.</p>
+     *
+     * @see ANDROID_TONEMAP_CURVE
+     */
+    ANDROID_TONEMAP_MAX_CURVE_POINTS,
+    /**
+     * android.tonemap.availableToneMapModes [static, byte[], public]
+     *
+     * <p>List of tonemapping modes for ANDROID_TONEMAP_MODE that are supported by this camera
+     * device.</p>
+     *
+     * @see ANDROID_TONEMAP_MODE
+     */
+    ANDROID_TONEMAP_AVAILABLE_TONE_MAP_MODES,
+    /**
+     * android.tonemap.gamma [dynamic, float, public]
+     *
+     * <p>Tonemapping curve to use when ANDROID_TONEMAP_MODE is
+     * GAMMA_VALUE</p>
+     *
+     * @see ANDROID_TONEMAP_MODE
+     */
+    ANDROID_TONEMAP_GAMMA,
+    /**
+     * android.tonemap.presetCurve [dynamic, enum, public]
+     *
+     * <p>Tonemapping curve to use when ANDROID_TONEMAP_MODE is
+     * PRESET_CURVE</p>
+     *
+     * @see ANDROID_TONEMAP_MODE
+     */
+    ANDROID_TONEMAP_PRESET_CURVE,
+    /**
+     * android.led.transmit [dynamic, enum, hidden]
+     *
+     * <p>This LED is nominally used to indicate to the user
+     * that the camera is powered on and may be streaming images back to the
+     * Application Processor. In certain rare circumstances, the OS may
+     * disable this when video is processed locally and not transmitted to
+     * any untrusted applications.</p>
+     * <p>In particular, the LED <em>must</em> always be on when the data could be
+     * transmitted off the device. The LED <em>should</em> always be on whenever
+     * data is stored locally on the device.</p>
+     * <p>The LED <em>may</em> be off if a trusted application is using the data that
+     * doesn't violate the above rules.</p>
+     */
+    ANDROID_LED_TRANSMIT = CameraMetadataSectionStart.ANDROID_LED_START,
+    /**
+     * android.led.availableLeds [static, enum[], hidden]
+     *
+     * <p>A list of camera LEDs that are available on this system.</p>
+     */
+    ANDROID_LED_AVAILABLE_LEDS,
+    /**
+     * android.info.supportedHardwareLevel [static, enum, public]
+     *
+     * <p>Generally classifies the overall set of the camera device functionality.</p>
+     */
+    ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL = CameraMetadataSectionStart.ANDROID_INFO_START,
+    /**
+     * android.info.version [static, byte, public]
+     *
+     * <p>A short string for manufacturer version information about the camera device, such as
+     * ISP hardware, sensors, etc.</p>
+     */
+    ANDROID_INFO_VERSION,
+    /**
+     * android.info.supportedBufferManagementVersion [static, enum, system]
+     *
+     * <p>The version of buffer management API this camera device supports and opts into.</p>
+     */
+    ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION,
+    /**
+     * android.info.deviceStateOrientations [static, int64[], ndk_public]
+     */
+    ANDROID_INFO_DEVICE_STATE_ORIENTATIONS,
+    /**
+     * android.blackLevel.lock [dynamic, enum, public]
+     *
+     * <p>Whether black-level compensation is locked
+     * to its current values, or is free to vary.</p>
+     */
+    ANDROID_BLACK_LEVEL_LOCK = CameraMetadataSectionStart.ANDROID_BLACK_LEVEL_START,
+    /**
+     * android.sync.frameNumber [dynamic, enum, ndk_public]
+     *
+     * <p>The frame number corresponding to the last request
+     * with which the output result (metadata + buffers) has been fully
+     * synchronized.</p>
+     */
+    ANDROID_SYNC_FRAME_NUMBER = CameraMetadataSectionStart.ANDROID_SYNC_START,
+    /**
+     * android.sync.maxLatency [static, enum, public]
+     *
+     * <p>The maximum number of frames that can occur after a request
+     * (different than the previous) has been submitted, and before the
+     * result's state becomes synchronized.</p>
+     */
+    ANDROID_SYNC_MAX_LATENCY,
+    /**
+     * android.reprocess.effectiveExposureFactor [dynamic, float, java_public]
+     *
+     * <p>The amount of exposure time increase factor applied to the original output
+     * frame by the application processing before sending for reprocessing.</p>
+     */
+    ANDROID_REPROCESS_EFFECTIVE_EXPOSURE_FACTOR = CameraMetadataSectionStart.ANDROID_REPROCESS_START,
+    /**
+     * android.reprocess.maxCaptureStall [static, int32, java_public]
+     *
+     * <p>The maximal camera capture pipeline stall (in unit of frame count) introduced by a
+     * reprocess capture request.</p>
+     */
+    ANDROID_REPROCESS_MAX_CAPTURE_STALL,
+    /**
+     * android.depth.maxDepthSamples [static, int32, system]
+     *
+     * <p>Maximum number of points that a depth point cloud may contain.</p>
+     */
+    ANDROID_DEPTH_MAX_DEPTH_SAMPLES = CameraMetadataSectionStart.ANDROID_DEPTH_START,
+    /**
+     * android.depth.availableDepthStreamConfigurations [static, enum[], ndk_public]
+     *
+     * <p>The available depth dataspace stream
+     * configurations that this camera device supports
+     * (i.e. format, width, height, output/input stream).</p>
+     */
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS,
+    /**
+     * android.depth.availableDepthMinFrameDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination for depth output formats.</p>
+     */
+    ANDROID_DEPTH_AVAILABLE_DEPTH_MIN_FRAME_DURATIONS,
+    /**
+     * android.depth.availableDepthStallDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination for depth streams.</p>
+     */
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS,
+    /**
+     * android.depth.depthIsExclusive [static, enum, public]
+     *
+     * <p>Indicates whether a capture request may target both a
+     * DEPTH16 / DEPTH_POINT_CLOUD output, and normal color outputs (such as
+     * YUV_420_888, JPEG, or RAW) simultaneously.</p>
+     */
+    ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE,
+    /**
+     * android.depth.availableRecommendedDepthStreamConfigurations [static, int32[], ndk_public]
+     *
+     * <p>Recommended depth stream configurations for common client use cases.</p>
+     */
+    ANDROID_DEPTH_AVAILABLE_RECOMMENDED_DEPTH_STREAM_CONFIGURATIONS,
+    /**
+     * android.depth.availableDynamicDepthStreamConfigurations [static, enum[], ndk_public]
+     *
+     * <p>The available dynamic depth dataspace stream
+     * configurations that this camera device supports
+     * (i.e. format, width, height, output/input stream).</p>
+     */
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS,
+    /**
+     * android.depth.availableDynamicDepthMinFrameDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination for dynamic depth output streams.</p>
+     */
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_MIN_FRAME_DURATIONS,
+    /**
+     * android.depth.availableDynamicDepthStallDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination for dynamic depth streams.</p>
+     */
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STALL_DURATIONS,
+    /**
+     * android.depth.availableDepthStreamConfigurationsMaximumResolution [static, enum[], ndk_public]
+     *
+     * <p>The available depth dataspace stream
+     * configurations that this camera device supports
+     * (i.e. format, width, height, output/input stream) when a CaptureRequest is submitted with
+     * ANDROID_SENSOR_PIXEL_MODE set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.depth.availableDepthMinFrameDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination for depth output formats when a CaptureRequest is submitted with
+     * ANDROID_SENSOR_PIXEL_MODE set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_DEPTH_AVAILABLE_DEPTH_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.depth.availableDepthStallDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination for depth streams for CaptureRequests where
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.depth.availableDynamicDepthStreamConfigurationsMaximumResolution [static, enum[], ndk_public]
+     *
+     * <p>The available dynamic depth dataspace stream
+     * configurations that this camera device supports (i.e. format, width, height,
+     * output/input stream) for CaptureRequests where ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.depth.availableDynamicDepthMinFrameDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination for dynamic depth output streams  for CaptureRequests where
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.depth.availableDynamicDepthStallDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination for dynamic depth streams for CaptureRequests where
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STALL_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.logicalMultiCamera.physicalIds [static, byte[], ndk_public]
+     *
+     * <p>String containing the ids of the underlying physical cameras.</p>
+     */
+    ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS = CameraMetadataSectionStart.ANDROID_LOGICAL_MULTI_CAMERA_START,
+    /**
+     * android.logicalMultiCamera.sensorSyncType [static, enum, public]
+     *
+     * <p>The accuracy of frame timestamp synchronization between physical cameras</p>
+     */
+    ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE,
+    /**
+     * android.logicalMultiCamera.activePhysicalId [dynamic, byte, public]
+     *
+     * <p>String containing the ID of the underlying active physical camera.</p>
+     */
+    ANDROID_LOGICAL_MULTI_CAMERA_ACTIVE_PHYSICAL_ID,
+    /**
+     * android.distortionCorrection.mode [dynamic, enum, public]
+     *
+     * <p>Mode of operation for the lens distortion correction block.</p>
+     */
+    ANDROID_DISTORTION_CORRECTION_MODE = CameraMetadataSectionStart.ANDROID_DISTORTION_CORRECTION_START,
+    /**
+     * android.distortionCorrection.availableModes [static, byte[], public]
+     *
+     * <p>List of distortion correction modes for ANDROID_DISTORTION_CORRECTION_MODE that are
+     * supported by this camera device.</p>
+     *
+     * @see ANDROID_DISTORTION_CORRECTION_MODE
+     */
+    ANDROID_DISTORTION_CORRECTION_AVAILABLE_MODES,
+    /**
+     * android.heic.availableHeicStreamConfigurations [static, enum[], ndk_public]
+     *
+     * <p>The available HEIC (ISO/IEC 23008-12) stream
+     * configurations that this camera device supports
+     * (i.e. format, width, height, output/input stream).</p>
+     */
+    ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS = CameraMetadataSectionStart.ANDROID_HEIC_START,
+    /**
+     * android.heic.availableHeicMinFrameDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination for HEIC output formats.</p>
+     */
+    ANDROID_HEIC_AVAILABLE_HEIC_MIN_FRAME_DURATIONS,
+    /**
+     * android.heic.availableHeicStallDurations [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination for HEIC streams.</p>
+     */
+    ANDROID_HEIC_AVAILABLE_HEIC_STALL_DURATIONS,
+    /**
+     * android.heic.availableHeicStreamConfigurationsMaximumResolution [static, enum[], ndk_public]
+     *
+     * <p>The available HEIC (ISO/IEC 23008-12) stream
+     * configurations that this camera device supports
+     * (i.e. format, width, height, output/input stream).</p>
+     */
+    ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.heic.availableHeicMinFrameDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the minimum frame duration for each
+     * format/size combination for HEIC output formats for CaptureRequests where
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_HEIC_AVAILABLE_HEIC_MIN_FRAME_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.heic.availableHeicStallDurationsMaximumResolution [static, int64[], ndk_public]
+     *
+     * <p>This lists the maximum stall duration for each
+     * output format/size combination for HEIC streams for CaptureRequests where
+     * ANDROID_SENSOR_PIXEL_MODE is set to
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraMetadata.html#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION">CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION</a>.</p>
+     *
+     * @see ANDROID_SENSOR_PIXEL_MODE
+     */
+    ANDROID_HEIC_AVAILABLE_HEIC_STALL_DURATIONS_MAXIMUM_RESOLUTION,
+    /**
+     * android.heic.info.supported [static, enum, system]
+     *
+     * <p>Whether this camera device can support identical set of stream combinations
+     * involving HEIC image format, compared to the
+     * <a href="https://developer.android.com/reference/android/hardware/camera2/CameraDevice.html#createCaptureSession">table of combinations</a>
+     * involving JPEG image format required for the device's hardware level and capabilities.</p>
+     */
+    ANDROID_HEIC_INFO_SUPPORTED = CameraMetadataSectionStart.ANDROID_HEIC_INFO_START,
+    /**
+     * android.heic.info.maxJpegAppSegmentsCount [static, byte, system]
+     *
+     * <p>The maximum number of Jpeg APP segments supported by the camera HAL device.</p>
+     */
+    ANDROID_HEIC_INFO_MAX_JPEG_APP_SEGMENTS_COUNT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ColorCorrectionAberrationMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ColorCorrectionAberrationMode.aidl
new file mode 100644
index 0000000..890ac0e
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ColorCorrectionAberrationMode.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.colorCorrection.aberrationMode enumeration values
+ * @see ANDROID_COLOR_CORRECTION_ABERRATION_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ColorCorrectionAberrationMode {
+    ANDROID_COLOR_CORRECTION_ABERRATION_MODE_OFF,
+    ANDROID_COLOR_CORRECTION_ABERRATION_MODE_FAST,
+    ANDROID_COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ColorCorrectionMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ColorCorrectionMode.aidl
new file mode 100644
index 0000000..33a0879
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ColorCorrectionMode.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/*
+ * Enumeration definitions for the various entries that need them
+ *
+ *
+ * android.colorCorrection.mode enumeration values
+ * @see ANDROID_COLOR_CORRECTION_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ColorCorrectionMode {
+    ANDROID_COLOR_CORRECTION_MODE_TRANSFORM_MATRIX,
+    ANDROID_COLOR_CORRECTION_MODE_FAST,
+    ANDROID_COLOR_CORRECTION_MODE_HIGH_QUALITY,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeAntibandingMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeAntibandingMode.aidl
new file mode 100644
index 0000000..8a2f501
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeAntibandingMode.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.aeAntibandingMode enumeration values
+ * @see ANDROID_CONTROL_AE_ANTIBANDING_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAeAntibandingMode {
+    ANDROID_CONTROL_AE_ANTIBANDING_MODE_OFF,
+    ANDROID_CONTROL_AE_ANTIBANDING_MODE_50HZ,
+    ANDROID_CONTROL_AE_ANTIBANDING_MODE_60HZ,
+    ANDROID_CONTROL_AE_ANTIBANDING_MODE_AUTO,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeLock.aidl
similarity index 60%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/ControlAeLock.aidl
index abebe6a..ab56fdc 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeLock.aidl
@@ -14,9 +14,21 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.control.aeLock enumeration values
+ * @see ANDROID_CONTROL_AE_LOCK
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAeLock {
+    ANDROID_CONTROL_AE_LOCK_OFF,
+    ANDROID_CONTROL_AE_LOCK_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeLockAvailable.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeLockAvailable.aidl
new file mode 100644
index 0000000..b846fc1
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeLockAvailable.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.aeLockAvailable enumeration values
+ * @see ANDROID_CONTROL_AE_LOCK_AVAILABLE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAeLockAvailable {
+    ANDROID_CONTROL_AE_LOCK_AVAILABLE_FALSE,
+    ANDROID_CONTROL_AE_LOCK_AVAILABLE_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeMode.aidl
new file mode 100644
index 0000000..9a9d5bc
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeMode.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/*
+ * Enumeration definitions for the various entries that need them
+ *
+ *
+ * android.control.aeMode enumeration values added
+ * @see ANDROID_CONTROL_AE_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAeMode {
+    ANDROID_CONTROL_AE_MODE_OFF,
+    ANDROID_CONTROL_AE_MODE_ON,
+    ANDROID_CONTROL_AE_MODE_ON_AUTO_FLASH,
+    ANDROID_CONTROL_AE_MODE_ON_ALWAYS_FLASH,
+    ANDROID_CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE,
+    ANDROID_CONTROL_AE_MODE_ON_EXTERNAL_FLASH,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAePrecaptureTrigger.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAePrecaptureTrigger.aidl
new file mode 100644
index 0000000..2229712
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAePrecaptureTrigger.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.aePrecaptureTrigger enumeration values
+ * @see ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAePrecaptureTrigger {
+    ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_IDLE,
+    ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_START,
+    ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeState.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeState.aidl
new file mode 100644
index 0000000..af8c2cf
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAeState.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.aeState enumeration values
+ * @see ANDROID_CONTROL_AE_STATE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAeState {
+    ANDROID_CONTROL_AE_STATE_INACTIVE,
+    ANDROID_CONTROL_AE_STATE_SEARCHING,
+    ANDROID_CONTROL_AE_STATE_CONVERGED,
+    ANDROID_CONTROL_AE_STATE_LOCKED,
+    ANDROID_CONTROL_AE_STATE_FLASH_REQUIRED,
+    ANDROID_CONTROL_AE_STATE_PRECAPTURE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfMode.aidl
new file mode 100644
index 0000000..344f2de
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfMode.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.afMode enumeration values
+ * @see ANDROID_CONTROL_AF_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAfMode {
+    ANDROID_CONTROL_AF_MODE_OFF,
+    ANDROID_CONTROL_AF_MODE_AUTO,
+    ANDROID_CONTROL_AF_MODE_MACRO,
+    ANDROID_CONTROL_AF_MODE_CONTINUOUS_VIDEO,
+    ANDROID_CONTROL_AF_MODE_CONTINUOUS_PICTURE,
+    ANDROID_CONTROL_AF_MODE_EDOF,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfSceneChange.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfSceneChange.aidl
new file mode 100644
index 0000000..153611a
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfSceneChange.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.afSceneChange enumeration values
+ * @see ANDROID_CONTROL_AF_SCENE_CHANGE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAfSceneChange {
+    ANDROID_CONTROL_AF_SCENE_CHANGE_NOT_DETECTED,
+    ANDROID_CONTROL_AF_SCENE_CHANGE_DETECTED,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfState.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfState.aidl
new file mode 100644
index 0000000..2c8d602
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfState.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.afState enumeration values
+ * @see ANDROID_CONTROL_AF_STATE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAfState {
+    ANDROID_CONTROL_AF_STATE_INACTIVE,
+    ANDROID_CONTROL_AF_STATE_PASSIVE_SCAN,
+    ANDROID_CONTROL_AF_STATE_PASSIVE_FOCUSED,
+    ANDROID_CONTROL_AF_STATE_ACTIVE_SCAN,
+    ANDROID_CONTROL_AF_STATE_FOCUSED_LOCKED,
+    ANDROID_CONTROL_AF_STATE_NOT_FOCUSED_LOCKED,
+    ANDROID_CONTROL_AF_STATE_PASSIVE_UNFOCUSED,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfTrigger.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfTrigger.aidl
new file mode 100644
index 0000000..b68d4c7
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAfTrigger.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.afTrigger enumeration values
+ * @see ANDROID_CONTROL_AF_TRIGGER
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAfTrigger {
+    ANDROID_CONTROL_AF_TRIGGER_IDLE,
+    ANDROID_CONTROL_AF_TRIGGER_START,
+    ANDROID_CONTROL_AF_TRIGGER_CANCEL,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbLock.aidl
similarity index 60%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbLock.aidl
index abebe6a..f7229f2 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbLock.aidl
@@ -14,9 +14,21 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.control.awbLock enumeration values
+ * @see ANDROID_CONTROL_AWB_LOCK
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAwbLock {
+    ANDROID_CONTROL_AWB_LOCK_OFF,
+    ANDROID_CONTROL_AWB_LOCK_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbLockAvailable.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbLockAvailable.aidl
new file mode 100644
index 0000000..0cb6ebe
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbLockAvailable.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.awbLockAvailable enumeration values
+ * @see ANDROID_CONTROL_AWB_LOCK_AVAILABLE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAwbLockAvailable {
+    ANDROID_CONTROL_AWB_LOCK_AVAILABLE_FALSE,
+    ANDROID_CONTROL_AWB_LOCK_AVAILABLE_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbMode.aidl
new file mode 100644
index 0000000..2f9b801
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbMode.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.awbMode enumeration values
+ * @see ANDROID_CONTROL_AWB_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAwbMode {
+    ANDROID_CONTROL_AWB_MODE_OFF,
+    ANDROID_CONTROL_AWB_MODE_AUTO,
+    ANDROID_CONTROL_AWB_MODE_INCANDESCENT,
+    ANDROID_CONTROL_AWB_MODE_FLUORESCENT,
+    ANDROID_CONTROL_AWB_MODE_WARM_FLUORESCENT,
+    ANDROID_CONTROL_AWB_MODE_DAYLIGHT,
+    ANDROID_CONTROL_AWB_MODE_CLOUDY_DAYLIGHT,
+    ANDROID_CONTROL_AWB_MODE_TWILIGHT,
+    ANDROID_CONTROL_AWB_MODE_SHADE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbState.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbState.aidl
new file mode 100644
index 0000000..1a93191
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlAwbState.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.awbState enumeration values
+ * @see ANDROID_CONTROL_AWB_STATE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlAwbState {
+    ANDROID_CONTROL_AWB_STATE_INACTIVE,
+    ANDROID_CONTROL_AWB_STATE_SEARCHING,
+    ANDROID_CONTROL_AWB_STATE_CONVERGED,
+    ANDROID_CONTROL_AWB_STATE_LOCKED,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlCaptureIntent.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlCaptureIntent.aidl
new file mode 100644
index 0000000..132d98c
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlCaptureIntent.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.captureIntent enumeration values
+ * @see ANDROID_CONTROL_CAPTURE_INTENT
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlCaptureIntent {
+    ANDROID_CONTROL_CAPTURE_INTENT_CUSTOM,
+    ANDROID_CONTROL_CAPTURE_INTENT_PREVIEW,
+    ANDROID_CONTROL_CAPTURE_INTENT_STILL_CAPTURE,
+    ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_RECORD,
+    ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT,
+    ANDROID_CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG,
+    ANDROID_CONTROL_CAPTURE_INTENT_MANUAL,
+    ANDROID_CONTROL_CAPTURE_INTENT_MOTION_TRACKING,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlEffectMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlEffectMode.aidl
new file mode 100644
index 0000000..1668cb3
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlEffectMode.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.effectMode enumeration values
+ * @see ANDROID_CONTROL_EFFECT_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlEffectMode {
+    ANDROID_CONTROL_EFFECT_MODE_OFF,
+    ANDROID_CONTROL_EFFECT_MODE_MONO,
+    ANDROID_CONTROL_EFFECT_MODE_NEGATIVE,
+    ANDROID_CONTROL_EFFECT_MODE_SOLARIZE,
+    ANDROID_CONTROL_EFFECT_MODE_SEPIA,
+    ANDROID_CONTROL_EFFECT_MODE_POSTERIZE,
+    ANDROID_CONTROL_EFFECT_MODE_WHITEBOARD,
+    ANDROID_CONTROL_EFFECT_MODE_BLACKBOARD,
+    ANDROID_CONTROL_EFFECT_MODE_AQUA,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlEnableZsl.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlEnableZsl.aidl
new file mode 100644
index 0000000..a83c051
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlEnableZsl.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.enableZsl enumeration values
+ * @see ANDROID_CONTROL_ENABLE_ZSL
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlEnableZsl {
+    ANDROID_CONTROL_ENABLE_ZSL_FALSE,
+    ANDROID_CONTROL_ENABLE_ZSL_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlExtendedSceneMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlExtendedSceneMode.aidl
new file mode 100644
index 0000000..2fe66cf
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlExtendedSceneMode.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.extendedSceneMode enumeration values
+ * @see ANDROID_CONTROL_EXTENDED_SCENE_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlExtendedSceneMode {
+    ANDROID_CONTROL_EXTENDED_SCENE_MODE_DISABLED = 0,
+    ANDROID_CONTROL_EXTENDED_SCENE_MODE_BOKEH_STILL_CAPTURE,
+    ANDROID_CONTROL_EXTENDED_SCENE_MODE_BOKEH_CONTINUOUS,
+    ANDROID_CONTROL_EXTENDED_SCENE_MODE_VENDOR_START = 0x40,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlMode.aidl
new file mode 100644
index 0000000..047556d
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlMode.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/*
+ * Enumeration definitions for the various entries that need them
+ *
+ *
+ * android.control.mode enumeration values
+ * @see ANDROID_CONTROL_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlMode {
+    ANDROID_CONTROL_MODE_OFF,
+    ANDROID_CONTROL_MODE_AUTO,
+    ANDROID_CONTROL_MODE_USE_SCENE_MODE,
+    ANDROID_CONTROL_MODE_OFF_KEEP_STATE,
+    ANDROID_CONTROL_MODE_USE_EXTENDED_SCENE_MODE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlSceneMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlSceneMode.aidl
new file mode 100644
index 0000000..0f90aaa
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlSceneMode.aidl
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.control.sceneMode enumeration values
+ * @see ANDROID_CONTROL_SCENE_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlSceneMode {
+    ANDROID_CONTROL_SCENE_MODE_DISABLED = 0,
+    ANDROID_CONTROL_SCENE_MODE_FACE_PRIORITY,
+    ANDROID_CONTROL_SCENE_MODE_ACTION,
+    ANDROID_CONTROL_SCENE_MODE_PORTRAIT,
+    ANDROID_CONTROL_SCENE_MODE_LANDSCAPE,
+    ANDROID_CONTROL_SCENE_MODE_NIGHT,
+    ANDROID_CONTROL_SCENE_MODE_NIGHT_PORTRAIT,
+    ANDROID_CONTROL_SCENE_MODE_THEATRE,
+    ANDROID_CONTROL_SCENE_MODE_BEACH,
+    ANDROID_CONTROL_SCENE_MODE_SNOW,
+    ANDROID_CONTROL_SCENE_MODE_SUNSET,
+    ANDROID_CONTROL_SCENE_MODE_STEADYPHOTO,
+    ANDROID_CONTROL_SCENE_MODE_FIREWORKS,
+    ANDROID_CONTROL_SCENE_MODE_SPORTS,
+    ANDROID_CONTROL_SCENE_MODE_PARTY,
+    ANDROID_CONTROL_SCENE_MODE_CANDLELIGHT,
+    ANDROID_CONTROL_SCENE_MODE_BARCODE,
+    ANDROID_CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO,
+    ANDROID_CONTROL_SCENE_MODE_HDR,
+    ANDROID_CONTROL_SCENE_MODE_FACE_PRIORITY_LOW_LIGHT,
+    ANDROID_CONTROL_SCENE_MODE_DEVICE_CUSTOM_START = 100,
+    ANDROID_CONTROL_SCENE_MODE_DEVICE_CUSTOM_END = 127,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ControlVideoStabilizationMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ControlVideoStabilizationMode.aidl
new file mode 100644
index 0000000..4046c4e
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ControlVideoStabilizationMode.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/*
+ * Enumeration definitions for the various entries that need them
+ *
+ *
+ * android.control.videoStabilizationMode enumeration values
+ * @see ANDROID_CONTROL_VIDEO_STABILIZATION_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ControlVideoStabilizationMode {
+    ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_OFF,
+    ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_ON,
+    ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_PREVIEW_STABILIZATION,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/DemosaicMode.aidl
similarity index 60%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/DemosaicMode.aidl
index abebe6a..7d8cdcf 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/DemosaicMode.aidl
@@ -14,9 +14,21 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.demosaic.mode enumeration values
+ * @see ANDROID_DEMOSAIC_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum DemosaicMode {
+    ANDROID_DEMOSAIC_MODE_FAST,
+    ANDROID_DEMOSAIC_MODE_HIGH_QUALITY,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurations.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurations.aidl
new file mode 100644
index 0000000..7deb350
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurations.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.depth.availableDepthStreamConfigurations enumeration values
+ * @see ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS
+ */
+@VintfStability
+@Backing(type="int")
+enum DepthAvailableDepthStreamConfigurations {
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_OUTPUT,
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..5d06be1
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDepthStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.depth.availableDepthStreamConfigurationsMaximumResolution enumeration values
+ * @see ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION
+ */
+@VintfStability
+@Backing(type="int")
+enum DepthAvailableDepthStreamConfigurationsMaximumResolution {
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT,
+    ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurations.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurations.aidl
new file mode 100644
index 0000000..39a99b9
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurations.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.depth.availableDynamicDepthStreamConfigurations enumeration values
+ * @see ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS
+ */
+@VintfStability
+@Backing(type="int")
+enum DepthAvailableDynamicDepthStreamConfigurations {
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_OUTPUT,
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..30ea9b7
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.depth.availableDynamicDepthStreamConfigurationsMaximumResolution enumeration values
+ * @see ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION
+ */
+@VintfStability
+@Backing(type="int")
+enum DepthAvailableDynamicDepthStreamConfigurationsMaximumResolution {
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT,
+    ANDROID_DEPTH_AVAILABLE_DYNAMIC_DEPTH_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/DepthDepthIsExclusive.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/DepthDepthIsExclusive.aidl
new file mode 100644
index 0000000..4af81d9
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/DepthDepthIsExclusive.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.depth.depthIsExclusive enumeration values
+ * @see ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE
+ */
+@VintfStability
+@Backing(type="int")
+enum DepthDepthIsExclusive {
+    ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE_FALSE,
+    ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/DistortionCorrectionMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/DistortionCorrectionMode.aidl
new file mode 100644
index 0000000..3456207
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/DistortionCorrectionMode.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.distortionCorrection.mode enumeration values
+ * @see ANDROID_DISTORTION_CORRECTION_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum DistortionCorrectionMode {
+    ANDROID_DISTORTION_CORRECTION_MODE_OFF,
+    ANDROID_DISTORTION_CORRECTION_MODE_FAST,
+    ANDROID_DISTORTION_CORRECTION_MODE_HIGH_QUALITY,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/EdgeMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/EdgeMode.aidl
new file mode 100644
index 0000000..1e15523
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/EdgeMode.aidl
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.edge.mode enumeration values
+ * @see ANDROID_EDGE_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum EdgeMode {
+    ANDROID_EDGE_MODE_OFF,
+    ANDROID_EDGE_MODE_FAST,
+    ANDROID_EDGE_MODE_HIGH_QUALITY,
+    ANDROID_EDGE_MODE_ZERO_SHUTTER_LAG,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/FlashInfoAvailable.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/FlashInfoAvailable.aidl
new file mode 100644
index 0000000..0528037
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/FlashInfoAvailable.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.flash.info.available enumeration values
+ * @see ANDROID_FLASH_INFO_AVAILABLE
+ */
+@VintfStability
+@Backing(type="int")
+enum FlashInfoAvailable {
+    ANDROID_FLASH_INFO_AVAILABLE_FALSE,
+    ANDROID_FLASH_INFO_AVAILABLE_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/FlashMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/FlashMode.aidl
new file mode 100644
index 0000000..e175596
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/FlashMode.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.flash.mode enumeration values
+ * @see ANDROID_FLASH_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum FlashMode {
+    ANDROID_FLASH_MODE_OFF,
+    ANDROID_FLASH_MODE_SINGLE,
+    ANDROID_FLASH_MODE_TORCH,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/FlashState.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/FlashState.aidl
new file mode 100644
index 0000000..fc398f8
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/FlashState.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.flash.state enumeration values
+ * @see ANDROID_FLASH_STATE
+ */
+@VintfStability
+@Backing(type="int")
+enum FlashState {
+    ANDROID_FLASH_STATE_UNAVAILABLE,
+    ANDROID_FLASH_STATE_CHARGING,
+    ANDROID_FLASH_STATE_READY,
+    ANDROID_FLASH_STATE_FIRED,
+    ANDROID_FLASH_STATE_PARTIAL,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurations.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurations.aidl
new file mode 100644
index 0000000..fc9b6ec
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurations.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.heic.availableHeicStreamConfigurations enumeration values
+ * @see ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS
+ */
+@VintfStability
+@Backing(type="int")
+enum HeicAvailableHeicStreamConfigurations {
+    ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_OUTPUT,
+    ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..13b50ab
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/HeicAvailableHeicStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.heic.availableHeicStreamConfigurationsMaximumResolution enumeration values
+ * @see ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION
+ */
+@VintfStability
+@Backing(type="int")
+enum HeicAvailableHeicStreamConfigurationsMaximumResolution {
+    ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT,
+    ANDROID_HEIC_AVAILABLE_HEIC_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/HeicInfoSupported.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/HeicInfoSupported.aidl
new file mode 100644
index 0000000..c4e04f1
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/HeicInfoSupported.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.heic.info.supported enumeration values
+ * @see ANDROID_HEIC_INFO_SUPPORTED
+ */
+@VintfStability
+@Backing(type="int")
+enum HeicInfoSupported {
+    ANDROID_HEIC_INFO_SUPPORTED_FALSE,
+    ANDROID_HEIC_INFO_SUPPORTED_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/HotPixelMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/HotPixelMode.aidl
new file mode 100644
index 0000000..7b7aa21
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/HotPixelMode.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.hotPixel.mode enumeration values
+ * @see ANDROID_HOT_PIXEL_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum HotPixelMode {
+    ANDROID_HOT_PIXEL_MODE_OFF,
+    ANDROID_HOT_PIXEL_MODE_FAST,
+    ANDROID_HOT_PIXEL_MODE_HIGH_QUALITY,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/InfoSupportedBufferManagementVersion.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/InfoSupportedBufferManagementVersion.aidl
new file mode 100644
index 0000000..9522377
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/InfoSupportedBufferManagementVersion.aidl
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.info.supportedBufferManagementVersion enumeration values
+ * @see ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION
+ */
+@VintfStability
+@Backing(type="int")
+enum InfoSupportedBufferManagementVersion {
+    ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION_AIDL_DEVICE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/InfoSupportedHardwareLevel.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/InfoSupportedHardwareLevel.aidl
new file mode 100644
index 0000000..f242009
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/InfoSupportedHardwareLevel.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.info.supportedHardwareLevel enumeration values
+ * @see ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL
+ */
+@VintfStability
+@Backing(type="int")
+enum InfoSupportedHardwareLevel {
+    ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED,
+    ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_FULL,
+    ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY,
+    ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3,
+    ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/LedAvailableLeds.aidl
similarity index 61%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/LedAvailableLeds.aidl
index abebe6a..f26fcde 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LedAvailableLeds.aidl
@@ -14,9 +14,20 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.led.availableLeds enumeration values
+ * @see ANDROID_LED_AVAILABLE_LEDS
+ */
+@VintfStability
+@Backing(type="int")
+enum LedAvailableLeds {
+    ANDROID_LED_AVAILABLE_LEDS_TRANSMIT,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/LedTransmit.aidl
similarity index 61%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/LedTransmit.aidl
index abebe6a..62c9bd7 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LedTransmit.aidl
@@ -14,9 +14,21 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.led.transmit enumeration values
+ * @see ANDROID_LED_TRANSMIT
+ */
+@VintfStability
+@Backing(type="int")
+enum LedTransmit {
+    ANDROID_LED_TRANSMIT_OFF,
+    ANDROID_LED_TRANSMIT_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/LensFacing.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/LensFacing.aidl
new file mode 100644
index 0000000..0677ea9
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LensFacing.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.lens.facing enumeration values
+ * @see ANDROID_LENS_FACING
+ */
+@VintfStability
+@Backing(type="int")
+enum LensFacing {
+    ANDROID_LENS_FACING_FRONT,
+    ANDROID_LENS_FACING_BACK,
+    ANDROID_LENS_FACING_EXTERNAL,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/LensInfoFocusDistanceCalibration.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/LensInfoFocusDistanceCalibration.aidl
new file mode 100644
index 0000000..1c82bb0
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LensInfoFocusDistanceCalibration.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.lens.info.focusDistanceCalibration enumeration values
+ * @see ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION
+ */
+@VintfStability
+@Backing(type="int")
+enum LensInfoFocusDistanceCalibration {
+    ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED,
+    ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE,
+    ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/LensOpticalStabilizationMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/LensOpticalStabilizationMode.aidl
new file mode 100644
index 0000000..e350e15
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LensOpticalStabilizationMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.lens.opticalStabilizationMode enumeration values
+ * @see ANDROID_LENS_OPTICAL_STABILIZATION_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum LensOpticalStabilizationMode {
+    ANDROID_LENS_OPTICAL_STABILIZATION_MODE_OFF,
+    ANDROID_LENS_OPTICAL_STABILIZATION_MODE_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/LensPoseReference.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/LensPoseReference.aidl
new file mode 100644
index 0000000..ca18676
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LensPoseReference.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.lens.poseReference enumeration values
+ * @see ANDROID_LENS_POSE_REFERENCE
+ */
+@VintfStability
+@Backing(type="int")
+enum LensPoseReference {
+    ANDROID_LENS_POSE_REFERENCE_PRIMARY_CAMERA,
+    ANDROID_LENS_POSE_REFERENCE_GYROSCOPE,
+    ANDROID_LENS_POSE_REFERENCE_UNDEFINED,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/LensState.aidl
similarity index 61%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/LensState.aidl
index abebe6a..0e5a04c 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LensState.aidl
@@ -14,9 +14,21 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.lens.state enumeration values
+ * @see ANDROID_LENS_STATE
+ */
+@VintfStability
+@Backing(type="int")
+enum LensState {
+    ANDROID_LENS_STATE_STATIONARY,
+    ANDROID_LENS_STATE_MOVING,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/LogicalMultiCameraSensorSyncType.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/LogicalMultiCameraSensorSyncType.aidl
new file mode 100644
index 0000000..623a15c
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/LogicalMultiCameraSensorSyncType.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.logicalMultiCamera.sensorSyncType enumeration values
+ * @see ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE
+ */
+@VintfStability
+@Backing(type="int")
+enum LogicalMultiCameraSensorSyncType {
+    ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE,
+    ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/NoiseReductionMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/NoiseReductionMode.aidl
new file mode 100644
index 0000000..947361d
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/NoiseReductionMode.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.noiseReduction.mode enumeration values
+ * @see ANDROID_NOISE_REDUCTION_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum NoiseReductionMode {
+    ANDROID_NOISE_REDUCTION_MODE_OFF,
+    ANDROID_NOISE_REDUCTION_MODE_FAST,
+    ANDROID_NOISE_REDUCTION_MODE_HIGH_QUALITY,
+    ANDROID_NOISE_REDUCTION_MODE_MINIMAL,
+    ANDROID_NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/QuirksPartialResult.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/QuirksPartialResult.aidl
new file mode 100644
index 0000000..15a79b0
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/QuirksPartialResult.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.quirks.partialResult enumeration values
+ * @see ANDROID_QUIRKS_PARTIAL_RESULT
+ */
+@VintfStability
+@Backing(type="int")
+enum QuirksPartialResult {
+    ANDROID_QUIRKS_PARTIAL_RESULT_FINAL,
+    ANDROID_QUIRKS_PARTIAL_RESULT_PARTIAL,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/RequestAvailableCapabilities.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/RequestAvailableCapabilities.aidl
new file mode 100644
index 0000000..89f14ad
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/RequestAvailableCapabilities.aidl
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.request.availableCapabilities enumeration values
+ * @see ANDROID_REQUEST_AVAILABLE_CAPABILITIES
+ */
+@VintfStability
+@Backing(type="int")
+enum RequestAvailableCapabilities {
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_SECURE_IMAGE_DATA,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_SYSTEM_CAMERA,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_OFFLINE_PROCESSING,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_REMOSAIC_REPROCESSING,
+    ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DYNAMIC_RANGE_TEN_BIT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/RequestAvailableDynamicRangeProfilesMap.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/RequestAvailableDynamicRangeProfilesMap.aidl
new file mode 100644
index 0000000..c0ef8c6
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/RequestAvailableDynamicRangeProfilesMap.aidl
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.request.availableDynamicRangeProfilesMap enumeration values
+ * @see ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP
+ */
+@VintfStability
+@Backing(type="int")
+enum RequestAvailableDynamicRangeProfilesMap {
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_STANDARD = 0x1,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_HLG10 = 0x2,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_HDR10 = 0x4,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_HDR10_PLUS = 0x8,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_REF = 0x10,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_REF_PO = 0x20,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_OEM = 0x40,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_10B_HDR_OEM_PO = 0x80,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_REF = 0x100,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_REF_PO = 0x200,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_OEM = 0x400,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_DOLBY_VISION_8B_HDR_OEM_PO = 0x800,
+    ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_MAX = 0x1000,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/RequestMetadataMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/RequestMetadataMode.aidl
new file mode 100644
index 0000000..37d4095
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/RequestMetadataMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.request.metadataMode enumeration values
+ * @see ANDROID_REQUEST_METADATA_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum RequestMetadataMode {
+    ANDROID_REQUEST_METADATA_MODE_NONE,
+    ANDROID_REQUEST_METADATA_MODE_FULL,
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/metadata/aidl/android/hardware/camera/metadata/RequestType.aidl
similarity index 60%
copy from audio/7.1/IStreamIn.hal
copy to camera/metadata/aidl/android/hardware/camera/metadata/RequestType.aidl
index abebe6a..5010a37 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/RequestType.aidl
@@ -14,9 +14,21 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
 
-import @7.0::IStreamIn;
+package android.hardware.camera.metadata;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+/**
+ * android.request.type enumeration values
+ * @see ANDROID_REQUEST_TYPE
+ */
+@VintfStability
+@Backing(type="int")
+enum RequestType {
+    ANDROID_REQUEST_TYPE_CAPTURE,
+    ANDROID_REQUEST_TYPE_REPROCESS,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableFormats.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableFormats.aidl
new file mode 100644
index 0000000..a8e67bb
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableFormats.aidl
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.availableFormats enumeration values
+ * @see ANDROID_SCALER_AVAILABLE_FORMATS
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerAvailableFormats {
+    ANDROID_SCALER_AVAILABLE_FORMATS_RAW16 = 0x20,
+    ANDROID_SCALER_AVAILABLE_FORMATS_RAW_OPAQUE = 0x24,
+    ANDROID_SCALER_AVAILABLE_FORMATS_YV12 = 0x32315659,
+    ANDROID_SCALER_AVAILABLE_FORMATS_YCrCb_420_SP = 0x11,
+    ANDROID_SCALER_AVAILABLE_FORMATS_IMPLEMENTATION_DEFINED = 0x22,
+    ANDROID_SCALER_AVAILABLE_FORMATS_YCbCr_420_888 = 0x23,
+    ANDROID_SCALER_AVAILABLE_FORMATS_BLOB = 0x21,
+    ANDROID_SCALER_AVAILABLE_FORMATS_RAW10 = 0x25,
+    ANDROID_SCALER_AVAILABLE_FORMATS_RAW12 = 0x26,
+    ANDROID_SCALER_AVAILABLE_FORMATS_Y8 = 0x20203859,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableRecommendedStreamConfigurations.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableRecommendedStreamConfigurations.aidl
new file mode 100644
index 0000000..57c3989
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableRecommendedStreamConfigurations.aidl
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.availableRecommendedStreamConfigurations enumeration values
+ * @see ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerAvailableRecommendedStreamConfigurations {
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_PREVIEW = 0x0,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_RECORD = 0x1,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_VIDEO_SNAPSHOT = 0x2,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_SNAPSHOT = 0x3,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_ZSL = 0x4,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_RAW = 0x5,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_LOW_LATENCY_SNAPSHOT = 0x6,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_10BIT_OUTPUT = 0x8,
+    ANDROID_SCALER_AVAILABLE_RECOMMENDED_STREAM_CONFIGURATIONS_VENDOR_START = 0x18,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableStreamConfigurations.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableStreamConfigurations.aidl
new file mode 100644
index 0000000..2b493ae
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableStreamConfigurations.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.availableStreamConfigurations enumeration values
+ * @see ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerAvailableStreamConfigurations {
+    ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_OUTPUT,
+    ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableStreamConfigurationsMaximumResolution.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableStreamConfigurationsMaximumResolution.aidl
new file mode 100644
index 0000000..4f6cb5e
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerAvailableStreamConfigurationsMaximumResolution.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.availableStreamConfigurationsMaximumResolution enumeration values
+ * @see ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerAvailableStreamConfigurationsMaximumResolution {
+    ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_OUTPUT,
+    ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_MAXIMUM_RESOLUTION_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerCroppingType.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerCroppingType.aidl
new file mode 100644
index 0000000..e44eff1
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerCroppingType.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.croppingType enumeration values
+ * @see ANDROID_SCALER_CROPPING_TYPE
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerCroppingType {
+    ANDROID_SCALER_CROPPING_TYPE_CENTER_ONLY,
+    ANDROID_SCALER_CROPPING_TYPE_FREEFORM,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerMultiResolutionStreamSupported.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerMultiResolutionStreamSupported.aidl
new file mode 100644
index 0000000..f7cbc0f
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerMultiResolutionStreamSupported.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.multiResolutionStreamSupported enumeration values
+ * @see ANDROID_SCALER_MULTI_RESOLUTION_STREAM_SUPPORTED
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerMultiResolutionStreamSupported {
+    ANDROID_SCALER_MULTI_RESOLUTION_STREAM_SUPPORTED_FALSE,
+    ANDROID_SCALER_MULTI_RESOLUTION_STREAM_SUPPORTED_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerPhysicalCameraMultiResolutionStreamConfigurations.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerPhysicalCameraMultiResolutionStreamConfigurations.aidl
new file mode 100644
index 0000000..9427854
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerPhysicalCameraMultiResolutionStreamConfigurations.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.physicalCameraMultiResolutionStreamConfigurations enumeration values
+ * @see ANDROID_SCALER_PHYSICAL_CAMERA_MULTI_RESOLUTION_STREAM_CONFIGURATIONS
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerPhysicalCameraMultiResolutionStreamConfigurations {
+    ANDROID_SCALER_PHYSICAL_CAMERA_MULTI_RESOLUTION_STREAM_CONFIGURATIONS_OUTPUT,
+    ANDROID_SCALER_PHYSICAL_CAMERA_MULTI_RESOLUTION_STREAM_CONFIGURATIONS_INPUT,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ScalerRotateAndCrop.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerRotateAndCrop.aidl
new file mode 100644
index 0000000..9050153
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ScalerRotateAndCrop.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.scaler.rotateAndCrop enumeration values
+ * @see ANDROID_SCALER_ROTATE_AND_CROP
+ */
+@VintfStability
+@Backing(type="int")
+enum ScalerRotateAndCrop {
+    ANDROID_SCALER_ROTATE_AND_CROP_NONE,
+    ANDROID_SCALER_ROTATE_AND_CROP_90,
+    ANDROID_SCALER_ROTATE_AND_CROP_180,
+    ANDROID_SCALER_ROTATE_AND_CROP_270,
+    ANDROID_SCALER_ROTATE_AND_CROP_AUTO,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoColorFilterArrangement.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoColorFilterArrangement.aidl
new file mode 100644
index 0000000..59a4038
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoColorFilterArrangement.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sensor.info.colorFilterArrangement enumeration values
+ * @see ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
+ */
+@VintfStability
+@Backing(type="int")
+enum SensorInfoColorFilterArrangement {
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB,
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG,
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG,
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR,
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB,
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_MONO,
+    ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_NIR,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoLensShadingApplied.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoLensShadingApplied.aidl
new file mode 100644
index 0000000..8892ad3
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoLensShadingApplied.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sensor.info.lensShadingApplied enumeration values
+ * @see ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED
+ */
+@VintfStability
+@Backing(type="int")
+enum SensorInfoLensShadingApplied {
+    ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED_FALSE,
+    ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED_TRUE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoTimestampSource.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoTimestampSource.aidl
new file mode 100644
index 0000000..2a5860b
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SensorInfoTimestampSource.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sensor.info.timestampSource enumeration values
+ * @see ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE
+ */
+@VintfStability
+@Backing(type="int")
+enum SensorInfoTimestampSource {
+    ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN,
+    ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SensorPixelMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SensorPixelMode.aidl
new file mode 100644
index 0000000..3dda07b
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SensorPixelMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sensor.pixelMode enumeration values
+ * @see ANDROID_SENSOR_PIXEL_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum SensorPixelMode {
+    ANDROID_SENSOR_PIXEL_MODE_DEFAULT,
+    ANDROID_SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SensorRawBinningFactorUsed.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SensorRawBinningFactorUsed.aidl
new file mode 100644
index 0000000..20e92e4
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SensorRawBinningFactorUsed.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sensor.rawBinningFactorUsed enumeration values
+ * @see ANDROID_SENSOR_RAW_BINNING_FACTOR_USED
+ */
+@VintfStability
+@Backing(type="int")
+enum SensorRawBinningFactorUsed {
+    ANDROID_SENSOR_RAW_BINNING_FACTOR_USED_TRUE,
+    ANDROID_SENSOR_RAW_BINNING_FACTOR_USED_FALSE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SensorReferenceIlluminant1.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SensorReferenceIlluminant1.aidl
new file mode 100644
index 0000000..c8c9216
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SensorReferenceIlluminant1.aidl
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sensor.referenceIlluminant1 enumeration values
+ * @see ANDROID_SENSOR_REFERENCE_ILLUMINANT1
+ */
+@VintfStability
+@Backing(type="int")
+enum SensorReferenceIlluminant1 {
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT = 1,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT = 2,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN = 3,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FLASH = 4,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER = 9,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER = 10,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_SHADE = 11,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT = 12,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT = 13,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT = 14,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT = 15,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A = 17,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B = 18,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C = 19,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D55 = 20,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D65 = 21,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D75 = 22,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D50 = 23,
+    ANDROID_SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN = 24,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SensorTestPatternMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SensorTestPatternMode.aidl
new file mode 100644
index 0000000..c9ca70a
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SensorTestPatternMode.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sensor.testPatternMode enumeration values
+ * @see ANDROID_SENSOR_TEST_PATTERN_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum SensorTestPatternMode {
+    ANDROID_SENSOR_TEST_PATTERN_MODE_OFF,
+    ANDROID_SENSOR_TEST_PATTERN_MODE_SOLID_COLOR,
+    ANDROID_SENSOR_TEST_PATTERN_MODE_COLOR_BARS,
+    ANDROID_SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY,
+    ANDROID_SENSOR_TEST_PATTERN_MODE_PN9,
+    ANDROID_SENSOR_TEST_PATTERN_MODE_CUSTOM1 = 256,
+    ANDROID_SENSOR_TEST_PATTERN_MODE_BLACK,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/ShadingMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/ShadingMode.aidl
new file mode 100644
index 0000000..6939b72
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/ShadingMode.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.shading.mode enumeration values
+ * @see ANDROID_SHADING_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum ShadingMode {
+    ANDROID_SHADING_MODE_OFF,
+    ANDROID_SHADING_MODE_FAST,
+    ANDROID_SHADING_MODE_HIGH_QUALITY,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsFaceDetectMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsFaceDetectMode.aidl
new file mode 100644
index 0000000..0d17791
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsFaceDetectMode.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.statistics.faceDetectMode enumeration values
+ * @see ANDROID_STATISTICS_FACE_DETECT_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum StatisticsFaceDetectMode {
+    ANDROID_STATISTICS_FACE_DETECT_MODE_OFF,
+    ANDROID_STATISTICS_FACE_DETECT_MODE_SIMPLE,
+    ANDROID_STATISTICS_FACE_DETECT_MODE_FULL,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsHistogramMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsHistogramMode.aidl
new file mode 100644
index 0000000..a9b6f68
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsHistogramMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.statistics.histogramMode enumeration values
+ * @see ANDROID_STATISTICS_HISTOGRAM_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum StatisticsHistogramMode {
+    ANDROID_STATISTICS_HISTOGRAM_MODE_OFF,
+    ANDROID_STATISTICS_HISTOGRAM_MODE_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsHotPixelMapMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsHotPixelMapMode.aidl
new file mode 100644
index 0000000..286291a
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsHotPixelMapMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.statistics.hotPixelMapMode enumeration values
+ * @see ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum StatisticsHotPixelMapMode {
+    ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_OFF,
+    ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsLensShadingMapMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsLensShadingMapMode.aidl
new file mode 100644
index 0000000..d21b222
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsLensShadingMapMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.statistics.lensShadingMapMode enumeration values
+ * @see ANDROID_STATISTICS_LENS_SHADING_MAP_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum StatisticsLensShadingMapMode {
+    ANDROID_STATISTICS_LENS_SHADING_MAP_MODE_OFF,
+    ANDROID_STATISTICS_LENS_SHADING_MAP_MODE_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsOisDataMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsOisDataMode.aidl
new file mode 100644
index 0000000..afb281f
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsOisDataMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.statistics.oisDataMode enumeration values
+ * @see ANDROID_STATISTICS_OIS_DATA_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum StatisticsOisDataMode {
+    ANDROID_STATISTICS_OIS_DATA_MODE_OFF,
+    ANDROID_STATISTICS_OIS_DATA_MODE_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsSceneFlicker.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsSceneFlicker.aidl
new file mode 100644
index 0000000..da2402af
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsSceneFlicker.aidl
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.statistics.sceneFlicker enumeration values
+ * @see ANDROID_STATISTICS_SCENE_FLICKER
+ */
+@VintfStability
+@Backing(type="int")
+enum StatisticsSceneFlicker {
+    ANDROID_STATISTICS_SCENE_FLICKER_NONE,
+    ANDROID_STATISTICS_SCENE_FLICKER_50HZ,
+    ANDROID_STATISTICS_SCENE_FLICKER_60HZ,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsSharpnessMapMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsSharpnessMapMode.aidl
new file mode 100644
index 0000000..ed6c65c
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/StatisticsSharpnessMapMode.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.statistics.sharpnessMapMode enumeration values
+ * @see ANDROID_STATISTICS_SHARPNESS_MAP_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum StatisticsSharpnessMapMode {
+    ANDROID_STATISTICS_SHARPNESS_MAP_MODE_OFF,
+    ANDROID_STATISTICS_SHARPNESS_MAP_MODE_ON,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SyncFrameNumber.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SyncFrameNumber.aidl
new file mode 100644
index 0000000..e33319e
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SyncFrameNumber.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sync.frameNumber enumeration values
+ * @see ANDROID_SYNC_FRAME_NUMBER
+ */
+@VintfStability
+@Backing(type="int")
+enum SyncFrameNumber {
+    ANDROID_SYNC_FRAME_NUMBER_CONVERGING = -1,
+    ANDROID_SYNC_FRAME_NUMBER_UNKNOWN = -2,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/SyncMaxLatency.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/SyncMaxLatency.aidl
new file mode 100644
index 0000000..cb0668f
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/SyncMaxLatency.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.sync.maxLatency enumeration values
+ * @see ANDROID_SYNC_MAX_LATENCY
+ */
+@VintfStability
+@Backing(type="int")
+enum SyncMaxLatency {
+    ANDROID_SYNC_MAX_LATENCY_PER_FRAME_CONTROL = 0,
+    ANDROID_SYNC_MAX_LATENCY_UNKNOWN = -1,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/TonemapMode.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/TonemapMode.aidl
new file mode 100644
index 0000000..d4b7e0eb
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/TonemapMode.aidl
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.tonemap.mode enumeration values
+ * @see ANDROID_TONEMAP_MODE
+ */
+@VintfStability
+@Backing(type="int")
+enum TonemapMode {
+    ANDROID_TONEMAP_MODE_CONTRAST_CURVE,
+    ANDROID_TONEMAP_MODE_FAST,
+    ANDROID_TONEMAP_MODE_HIGH_QUALITY,
+    ANDROID_TONEMAP_MODE_GAMMA_VALUE,
+    ANDROID_TONEMAP_MODE_PRESET_CURVE,
+}
diff --git a/camera/metadata/aidl/android/hardware/camera/metadata/TonemapPresetCurve.aidl b/camera/metadata/aidl/android/hardware/camera/metadata/TonemapPresetCurve.aidl
new file mode 100644
index 0000000..2da3704
--- /dev/null
+++ b/camera/metadata/aidl/android/hardware/camera/metadata/TonemapPresetCurve.aidl
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Autogenerated from camera metadata definitions in
+ * /system/media/camera/docs/metadata_definitions.xml
+ * *** DO NOT EDIT BY HAND ***
+ */
+
+package android.hardware.camera.metadata;
+
+/**
+ * android.tonemap.presetCurve enumeration values
+ * @see ANDROID_TONEMAP_PRESET_CURVE
+ */
+@VintfStability
+@Backing(type="int")
+enum TonemapPresetCurve {
+    ANDROID_TONEMAP_PRESET_CURVE_SRGB,
+    ANDROID_TONEMAP_PRESET_CURVE_REC709,
+}
diff --git a/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp b/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
index 8c44010..3254cf2 100644
--- a/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
+++ b/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp
@@ -44,6 +44,7 @@
 #include <android/hardware/camera/device/3.7/ICameraDevice.h>
 #include <android/hardware/camera/device/3.8/ICameraDevice.h>
 #include <android/hardware/camera/device/3.7/ICameraDeviceSession.h>
+#include <android/hardware/camera/device/3.8/ICameraDeviceSession.h>
 #include <android/hardware/camera/device/3.7/ICameraInjectionSession.h>
 #include <android/hardware/camera/device/3.8/ICameraDeviceCallback.h>
 #include <android/hardware/camera/device/3.8/ICameraDeviceSession.h>
@@ -135,6 +136,8 @@
 using ::android::hardware::camera::metadata::V3_6::CameraMetadataEnumAndroidSensorPixelMode;
 using ::android::hardware::camera::metadata::V3_8::
         CameraMetadataEnumAndroidRequestAvailableDynamicRangeProfilesMap;
+using ::android::hardware::camera::metadata::V3_8::
+        CameraMetadataEnumAndroidScalerAvailableStreamUseCases;
 using ::android::hardware::camera::provider::V2_4::ICameraProvider;
 using ::android::hardware::camera::provider::V2_4::ICameraProviderCallback;
 using ::android::hardware::camera::provider::V2_6::CameraIdAndStreamCombination;
@@ -198,6 +201,15 @@
     HIDDEN_SECURE_CAMERA
 };
 
+const static std::vector<int32_t> kMandatoryUseCases = {
+        ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT,
+        ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW,
+        ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_STILL_CAPTURE,
+        ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_RECORD,
+        ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW_VIDEO_STILL,
+        ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_CALL
+};
+
 namespace {
     // "device@<version>/legacy/<id>"
     const char *kDeviceNameRE = "device@([0-9]+\\.[0-9]+)/%s/(.+)";
@@ -879,6 +891,7 @@
     void verifyCameraCharacteristics(Status status, const CameraMetadata& chars);
     void verifyExtendedSceneModeCharacteristics(const camera_metadata_t* metadata);
     void verifyZoomCharacteristics(const camera_metadata_t* metadata);
+    void verifyStreamUseCaseCharacteristics(const camera_metadata_t* metadata);
     void verifyRecommendedConfigs(const CameraMetadata& metadata);
     void verifyMonochromeCharacteristics(const CameraMetadata& chars, int deviceVersion);
     void verifyMonochromeCameraResult(
@@ -6879,6 +6892,134 @@
     }
 }
 
+// Verify that  valid stream use cases can be configured successfully, and invalid use cases
+// fail stream configuration.
+TEST_P(CameraHidlTest, configureStreamsUseCases) {
+    hidl_vec<hidl_string> cameraDeviceNames = getCameraDeviceNames(mProvider);
+
+    for (const auto& name : cameraDeviceNames) {
+        int deviceVersion = getCameraDeviceVersion(name, mProviderType);
+        if (deviceVersion < CAMERA_DEVICE_API_VERSION_3_8) {
+            continue;
+        }
+
+        camera_metadata_t* staticMeta;
+        Return<void> ret;
+        sp<ICameraDeviceSession> session;
+        sp<device::V3_3::ICameraDeviceSession> session3_3;
+        sp<device::V3_4::ICameraDeviceSession> session3_4;
+        sp<device::V3_5::ICameraDeviceSession> session3_5;
+        sp<device::V3_6::ICameraDeviceSession> session3_6;
+        sp<device::V3_7::ICameraDeviceSession> session3_7;
+        sp<device::V3_8::ICameraDeviceSession> session3_8;
+        sp<device::V3_2::ICameraDevice> cameraDevice;
+        sp<device::V3_5::ICameraDevice> cameraDevice3_5;
+        sp<device::V3_7::ICameraDevice> cameraDevice3_7;
+        sp<device::V3_8::ICameraDevice> cameraDevice3_8;
+        openEmptyDeviceSession(name, mProvider, &session /*out*/, &staticMeta /*out*/,
+                &cameraDevice /*out*/);
+        castSession(session, deviceVersion, &session3_3, &session3_4, &session3_5,
+                &session3_6, &session3_7, &session3_8);
+        ASSERT_NE(nullptr, session3_8);
+        castDevice(cameraDevice, deviceVersion, &cameraDevice3_5, &cameraDevice3_7,
+                   &cameraDevice3_8);
+        ASSERT_NE(nullptr, cameraDevice3_8);
+
+        // Check if camera support depth only
+        if (isDepthOnly(staticMeta)) {
+            free_camera_metadata(staticMeta);
+            ret = session->close();
+            ASSERT_TRUE(ret.isOk());
+            continue;
+        }
+
+        std::vector<AvailableStream> outputPreviewStreams;
+        AvailableStream previewThreshold = {kMaxPreviewWidth, kMaxPreviewHeight,
+                static_cast<int32_t>(PixelFormat::YCBCR_420_888)};
+        ASSERT_EQ(Status::OK, getAvailableOutputStreams(staticMeta, outputPreviewStreams,
+                &previewThreshold));
+        ASSERT_NE(0u, outputPreviewStreams.size());
+
+        // Combine valid and invalid stream use cases
+        std::vector<int32_t> useCases(kMandatoryUseCases);
+        useCases.push_back(ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_CALL + 1);
+
+        std::vector<int32_t> supportedUseCases;
+        camera_metadata_ro_entry entry;
+        auto retcode = find_camera_metadata_ro_entry(staticMeta,
+                ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES, &entry);
+        if ((0 == retcode) && (entry.count > 0)) {
+            supportedUseCases.insert(supportedUseCases.end(), entry.data.i32,
+                    entry.data.i32 + entry.count);
+        } else {
+            supportedUseCases.push_back(ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT);
+        }
+        free_camera_metadata(staticMeta);
+
+        ::android::hardware::hidl_vec<V3_8::Stream> streams3_8(1);
+        streams3_8[0].v3_7.groupId = -1;
+        streams3_8[0].v3_7.sensorPixelModesUsed = {
+                CameraMetadataEnumAndroidSensorPixelMode::ANDROID_SENSOR_PIXEL_MODE_DEFAULT};
+        streams3_8[0].v3_7.v3_4.bufferSize = 0;
+        streams3_8[0].v3_7.v3_4.v3_2.id = 0;
+        streams3_8[0].v3_7.v3_4.v3_2.streamType = StreamType::OUTPUT;
+        streams3_8[0].v3_7.v3_4.v3_2.width = static_cast<uint32_t>(outputPreviewStreams[0].width);
+        streams3_8[0].v3_7.v3_4.v3_2.height = static_cast<uint32_t>(outputPreviewStreams[0].height);
+        streams3_8[0].v3_7.v3_4.v3_2.format =
+                static_cast<PixelFormat>(outputPreviewStreams[0].format);
+        streams3_8[0].v3_7.v3_4.v3_2.usage = GRALLOC1_CONSUMER_USAGE_CPU_READ;
+        streams3_8[0].v3_7.v3_4.v3_2.dataSpace = 0;
+        streams3_8[0].v3_7.v3_4.v3_2.rotation = StreamRotation::ROTATION_0;
+        streams3_8[0].dynamicRangeProfile =
+                static_cast<CameraMetadataEnumAndroidRequestAvailableDynamicRangeProfilesMap>(
+                        ANDROID_REQUEST_AVAILABLE_DYNAMIC_RANGE_PROFILES_MAP_STANDARD);
+
+        uint32_t streamConfigCounter = 0;
+        ::android::hardware::camera::device::V3_8::StreamConfiguration config3_8;
+        RequestTemplate reqTemplate = RequestTemplate::STILL_CAPTURE;
+        ret = session3_8->constructDefaultRequestSettings(reqTemplate,
+                                        [&config3_8](auto status, const auto& req) {
+                                                    ASSERT_EQ(Status::OK, status);
+                                                    config3_8.sessionParams = req;
+                                                });
+        ASSERT_TRUE(ret.isOk());
+
+        for (int32_t useCase : useCases) {
+            bool useCaseSupported = std::find(supportedUseCases.begin(),
+                    supportedUseCases.end(), useCase) != supportedUseCases.end();
+
+            streams3_8[0].useCase =
+                    static_cast<CameraMetadataEnumAndroidScalerAvailableStreamUseCases>(useCase);
+            config3_8.streams = streams3_8;
+            config3_8.operationMode = StreamConfigurationMode::NORMAL_MODE;
+            config3_8.streamConfigCounter = streamConfigCounter;
+            config3_8.multiResolutionInputImage = false;
+            ret = cameraDevice3_8->isStreamCombinationSupported_3_8(
+                    config3_8, [&useCaseSupported](Status s, bool combStatus) {
+                        ASSERT_TRUE((Status::OK == s) || (Status::METHOD_NOT_SUPPORTED == s));
+                        if (Status::OK == s) {
+                            ASSERT_EQ(combStatus, useCaseSupported);
+                        }
+                    });
+            ASSERT_TRUE(ret.isOk());
+
+            ret = session3_8->configureStreams_3_8(
+                              config3_8,
+                              [&](Status s, device::V3_6::HalStreamConfiguration halConfig) {
+                                  if (useCaseSupported) {
+                                      ASSERT_EQ(Status::OK, s);
+                                      ASSERT_EQ(1u, halConfig.streams.size());
+                                  } else {
+                                      ASSERT_EQ(Status::ILLEGAL_ARGUMENT, s);
+                                  }
+                              });
+            ASSERT_TRUE(ret.isOk());
+        }
+        ret = session3_8->close();
+        ASSERT_TRUE(ret.isOk());
+    }
+}
+
 // Retrieve all valid output stream resolutions from the camera
 // static characteristics.
 Status CameraHidlTest::getAvailableOutputStreams(const camera_metadata_t* staticMeta,
@@ -9042,6 +9183,7 @@
 
     verifyExtendedSceneModeCharacteristics(metadata);
     verifyZoomCharacteristics(metadata);
+    verifyStreamUseCaseCharacteristics(metadata);
 }
 
 void CameraHidlTest::verifyExtendedSceneModeCharacteristics(const camera_metadata_t* metadata) {
@@ -9272,6 +9414,46 @@
     }
 }
 
+void CameraHidlTest::verifyStreamUseCaseCharacteristics(const camera_metadata_t* metadata) {
+    camera_metadata_ro_entry entry;
+    // Check capabilities
+    int retcode = find_camera_metadata_ro_entry(metadata,
+                ANDROID_REQUEST_AVAILABLE_CAPABILITIES, &entry);
+    bool hasStreamUseCaseCap = false;
+    if ((0 == retcode) && (entry.count > 0)) {
+        if (std::find(entry.data.u8, entry.data.u8 + entry.count,
+                ANDROID_REQUEST_AVAILABLE_CAPABILITIES_STREAM_USE_CASE) !=
+                entry.data.u8 + entry.count) {
+            hasStreamUseCaseCap = true;
+        }
+    }
+
+    bool supportMandatoryUseCases = false;
+    retcode = find_camera_metadata_ro_entry(metadata,
+        ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES, &entry);
+    if ((0 == retcode) && (entry.count > 0)) {
+        supportMandatoryUseCases = true;
+        for (size_t i = 0; i < kMandatoryUseCases.size(); i++) {
+            if (std::find(entry.data.i32, entry.data.i32 + entry.count, kMandatoryUseCases[i])
+                    == entry.data.i32 + entry.count) {
+                supportMandatoryUseCases = false;
+                break;
+            }
+        }
+        bool supportDefaultUseCase = false;
+        for (size_t i = 0; i < entry.count; i++) {
+            if (entry.data.i32[i] == ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT) {
+                supportDefaultUseCase = true;
+            }
+            ASSERT_TRUE(entry.data.i32[i] <= ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_CALL ||
+                    entry.data.i32[i] >= ANDROID_SCALER_AVAILABLE_STREAM_USE_CASES_VENDOR_START);
+        }
+        ASSERT_TRUE(supportDefaultUseCase);
+    }
+
+    ASSERT_EQ(hasStreamUseCaseCap, supportMandatoryUseCases);
+}
+
 void CameraHidlTest::verifyMonochromeCharacteristics(const CameraMetadata& chars,
         int deviceVersion) {
     const camera_metadata_t* metadata = (camera_metadata_t*)chars.data();
diff --git a/camera/provider/aidl/Android.bp b/camera/provider/aidl/Android.bp
new file mode 100644
index 0000000..6f1b781
--- /dev/null
+++ b/camera/provider/aidl/Android.bp
@@ -0,0 +1,34 @@
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    //   SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+aidl_interface {
+    name: "android.hardware.camera.provider",
+    vendor_available: true,
+    srcs: [
+        "android/hardware/camera/provider/*.aidl",
+    ],
+    imports: [
+        "android.hardware.camera.device",
+        "android.hardware.camera.common"
+    ],
+    stability: "vintf",
+    backend: {
+        java: {
+            enabled: false,
+        },
+        cpp: {
+            enabled: false,
+        },
+        ndk: {
+            vndk: {
+                enabled: true,
+            },
+        },
+    },
+}
diff --git a/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/CameraIdAndStreamCombination.aidl b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/CameraIdAndStreamCombination.aidl
new file mode 100644
index 0000000..df77c40
--- /dev/null
+++ b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/CameraIdAndStreamCombination.aidl
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.provider;
+@VintfStability
+parcelable CameraIdAndStreamCombination {
+  String cameraId;
+  android.hardware.camera.device.StreamConfiguration streamConfiguration;
+}
diff --git a/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ConcurrentCameraIdCombination.aidl b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ConcurrentCameraIdCombination.aidl
new file mode 100644
index 0000000..334fb2c
--- /dev/null
+++ b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ConcurrentCameraIdCombination.aidl
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.provider;
+@VintfStability
+parcelable ConcurrentCameraIdCombination {
+  List<String> combination;
+}
diff --git a/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ICameraProvider.aidl b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ICameraProvider.aidl
new file mode 100644
index 0000000..c15bdee
--- /dev/null
+++ b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ICameraProvider.aidl
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.provider;
+@VintfStability
+interface ICameraProvider {
+  void setCallback(android.hardware.camera.provider.ICameraProviderCallback callback);
+  android.hardware.camera.common.VendorTagSection[] getVendorTags();
+  String[] getCameraIdList();
+  android.hardware.camera.device.ICameraDevice getCameraDeviceInterface(String cameraDeviceName);
+  void notifyDeviceStateChange(long deviceState);
+  android.hardware.camera.provider.ConcurrentCameraIdCombination[] getConcurrentCameraIds();
+  boolean isConcurrentStreamCombinationSupported(in android.hardware.camera.provider.CameraIdAndStreamCombination[] configs);
+  const long DEVICE_STATE_NORMAL = 0;
+  const long DEVICE_STATE_BACK_COVERED = 1;
+  const long DEVICE_STATE_FRONT_COVERED = 2;
+  const long DEVICE_STATE_FOLDED = 4;
+}
diff --git a/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ICameraProviderCallback.aidl b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ICameraProviderCallback.aidl
new file mode 100644
index 0000000..d3c53f5
--- /dev/null
+++ b/camera/provider/aidl/aidl_api/android.hardware.camera.provider/current/android/hardware/camera/provider/ICameraProviderCallback.aidl
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+///////////////////////////////////////////////////////////////////////////////
+// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
+///////////////////////////////////////////////////////////////////////////////
+
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
+//
+// You must not make a backward incompatible change to any AIDL file built
+// with the aidl_interface module type with versions property set. The module
+// type is used to build AIDL files in a way that they can be used across
+// independently updatable components of the system. If a device is shipped
+// with such a backward incompatible change, it has a high risk of breaking
+// later when a module using the interface is updated, e.g., Mainline modules.
+
+package android.hardware.camera.provider;
+@VintfStability
+interface ICameraProviderCallback {
+  void cameraDeviceStatusChange(String cameraDeviceName, android.hardware.camera.common.CameraDeviceStatus newStatus);
+  void torchModeStatusChange(String cameraDeviceName, android.hardware.camera.common.TorchModeStatus newStatus);
+  void physicalCameraDeviceStatusChange(String cameraDeviceName, String physicalCameraDeviceName, android.hardware.camera.common.CameraDeviceStatus newStatus);
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/provider/aidl/android/hardware/camera/provider/CameraIdAndStreamCombination.aidl
similarity index 72%
copy from audio/7.1/IStreamIn.hal
copy to camera/provider/aidl/android/hardware/camera/provider/CameraIdAndStreamCombination.aidl
index abebe6a..36b48e1 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/provider/aidl/android/hardware/camera/provider/CameraIdAndStreamCombination.aidl
@@ -14,9 +14,13 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.provider;
 
-import @7.0::IStreamIn;
+import android.hardware.camera.device.StreamConfiguration;
 
-interface IStreamIn extends @7.0::IStreamIn {
-};
+@VintfStability
+parcelable CameraIdAndStreamCombination {
+    String cameraId;
+
+    StreamConfiguration streamConfiguration;
+}
diff --git a/audio/7.1/IStreamIn.hal b/camera/provider/aidl/android/hardware/camera/provider/ConcurrentCameraIdCombination.aidl
similarity index 81%
copy from audio/7.1/IStreamIn.hal
copy to camera/provider/aidl/android/hardware/camera/provider/ConcurrentCameraIdCombination.aidl
index abebe6a..7d8e486 100644
--- a/audio/7.1/IStreamIn.hal
+++ b/camera/provider/aidl/android/hardware/camera/provider/ConcurrentCameraIdCombination.aidl
@@ -14,9 +14,9 @@
  * limitations under the License.
  */
 
-package android.hardware.audio@7.1;
+package android.hardware.camera.provider;
 
-import @7.0::IStreamIn;
-
-interface IStreamIn extends @7.0::IStreamIn {
-};
+@VintfStability
+parcelable ConcurrentCameraIdCombination {
+    List<String> combination;
+}
diff --git a/camera/provider/aidl/android/hardware/camera/provider/ICameraProvider.aidl b/camera/provider/aidl/android/hardware/camera/provider/ICameraProvider.aidl
new file mode 100644
index 0000000..7a4e010
--- /dev/null
+++ b/camera/provider/aidl/android/hardware/camera/provider/ICameraProvider.aidl
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.provider;
+
+import android.hardware.camera.common.VendorTagSection;
+import android.hardware.camera.device.ICameraDevice;
+import android.hardware.camera.provider.CameraIdAndStreamCombination;
+import android.hardware.camera.provider.ConcurrentCameraIdCombination;
+import android.hardware.camera.provider.ICameraProviderCallback;
+
+/**
+ * Camera provider HAL, which enumerates the available individual camera devices
+ * known to the provider, and provides updates about changes to device status,
+ * such as connection, disconnection, or torch mode enable/disable.
+ *
+ * The provider is responsible for generating a list of camera device service
+ * names that can then be opened via the hardware service manager.
+ *
+ * Multiple camera provider HALs may be present in a single system.
+ * For discovery, the service names, and process names, must be of the form
+ * "android.hardware.camera.provider.ICameraProvider/<type>/<instance>"
+ * where
+ *   - <type> is the type of devices this provider knows about, such as
+ *     "internal", "external", "remote" etc. The camera framework
+ *     must not differentiate or chage its behavior based on the specific type.
+ *   - <instance> is a non-negative integer starting from 0 to disambiguate
+ *     between multiple HALs of the same type.
+ *
+ * The device instance names enumerated by the provider in getCameraIdList() or
+ * ICameraProviderCallback::cameraDeviceStatusChange() must be of the form
+ * "device@<major>.<minor>/<type>/<id>" where
+ * <major>/<minor> is the AIDL version of the interface. Major version is the version baked into the
+ * name of the device interface. Minor version is the version that would be returned by calling
+ * getInterfaceVersion on the interface binder returned getCameraDeviceInterface.
+ * <id> is either a small incrementing integer for "internal" device types, with 0 being the main
+ * back-facing camera and 1 being the main front-facing camera, if they exist.
+ * Or, for external devices, a unique serial number (if possible) that can be
+ * used to identify the device reliably when it is disconnected and reconnected.
+ *
+ * Multiple providers must not enumerate the same device ID.
+ */
+
+@VintfStability
+interface ICameraProvider {
+
+    /**
+     * Device states to be passed to notifyDeviceStateChange().
+     */
+    const long DEVICE_STATE_NORMAL = 0;
+    const long DEVICE_STATE_BACK_COVERED = 1 << 0;
+    const long DEVICE_STATE_FRONT_COVERED = 1 << 1;
+    const long DEVICE_STATE_FOLDED = 1 << 2;
+
+    /**
+     * setCallback:
+     *
+     * Provide a callback interface to the HAL provider to inform framework of
+     * asynchronous camera events. The framework must call this function once
+     * during camera service startup, before any other calls to the provider
+     * (note that in case the camera service restarts, this method must be
+     * invoked again during its startup).
+     *
+     * @param callback
+     *     A non-null callback interface to invoke when camera events occur.
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         An unexpected internal error occurred while setting the callbacks
+     *     ILLEGAL_ARGUMENT:
+     *         The callback argument is invalid (for example, null).
+     *
+     */
+    void setCallback(ICameraProviderCallback callback);
+
+    /**
+     * getVendorTags:
+     *
+     * Retrieve all vendor tags supported by devices discoverable through this
+     * provider. The tags are grouped into sections.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         An unexpected internal error occurred while setting the callbacks
+     * @return
+     *     The supported vendor tag sections; empty if there are no supported
+     *     vendor tags.
+     *
+     */
+    VendorTagSection[] getVendorTags();
+
+    /**
+     * getCameraIdList:
+     *
+     * Returns the list of internal camera device interfaces known to this
+     * camera provider. These devices can then be accessed via the service manager.
+     *
+     * External camera devices (camera facing EXTERNAL) must be reported through
+     * the device status change callback, not in this list. Only devices with
+     * facing BACK or FRONT must be listed here.
+     *
+     * A service specific error will be returned on the following conditions
+     *     INTERNAL_ERROR:
+     *         A camera ID list cannot be created. This may be due to
+     *         a failure to initialize the camera subsystem, for example.
+     * @return The list of internal camera device names known to this provider.
+     */
+    String[] getCameraIdList();
+
+    /**
+     * getCameraDeviceInterface:
+     *
+     * Return a android.hardware.camera.device/ICameraDevice interface for
+     * the requested device name. This does not power on the camera device, but
+     * simply acquires the interface for querying the device static information,
+     * or to additionally open the device for active use.
+     *
+     * Valid device names for this provider can be obtained via either
+     * getCameraIdList(), or via availability callbacks from
+     * ICameraProviderCallback::cameraDeviceStatusChange().
+     *
+     * @param cameraDeviceName the name of the device to get an interface to.
+     *
+     * A service specific error will be returned on the following conditions
+     *     ILLEGAL_ARGUMENT:
+     *         This device name is unknown, or has been disconnected
+     *     OPERATION_NOT_SUPPORTED:
+     *         The specified device does not support this major version of the
+     *         HAL interface.
+     *     INTERNAL_ERROR:
+     *         A camera interface cannot be returned due to an unexpected
+     *         internal error.
+     * @return device The interface to this camera device, or null in case of
+     *     error.
+     */
+    ICameraDevice getCameraDeviceInterface(String cameraDeviceName);
+
+    /**
+     * notifyDeviceStateChange:
+     *
+     * Notify the HAL provider that the state of the overall device has
+     * changed in some way that the HAL may want to know about.
+     *
+     * For example, a physical shutter may have been uncovered or covered,
+     * or a camera may have been covered or uncovered by an add-on keyboard
+     * or other accessory.
+     *
+     * The state is a bitfield of potential states, and some physical configurations
+     * could plausibly correspond to multiple different combinations of state bits.
+     * The HAL must ignore any state bits it is not actively using to determine
+     * the appropriate camera configuration.
+     *
+     * For example, on some devices the FOLDED state could mean that
+     * backward-facing cameras are covered by the fold, so FOLDED by itself implies
+     * BACK_COVERED. But other devices may support folding but not cover any cameras
+     * when folded, so for those FOLDED would not imply any of the other flags.
+     * Since these relationships are very device-specific, it is difficult to specify
+     * a comprehensive policy.  But as a recommendation, it is suggested that if a flag
+     * necessarily implies other flags are set as well, then those flags should be set.
+     * So even though FOLDED would be enough to infer BACK_COVERED on some devices, the
+     * BACK_COVERED flag should also be set for clarity.
+     *
+     * This method may be invoked by the HAL client at any time. It must not
+     * cause any active camera device sessions to be closed, but may dynamically
+     * change which physical camera a logical multi-camera is using for its
+     * active and future output.
+     *
+     * The method must be invoked by the HAL client at least once before the
+     * client calls ICameraDevice::open on any camera device interfaces listed
+     * by this provider, to establish the initial device state.
+     *
+     * @param newState
+     *    The new state of the device.
+     */
+    void notifyDeviceStateChange(long deviceState);
+
+    /**
+     * getConcurrentStreamingCameraIds
+     *
+     * Get a vector of combinations of camera device ids that are able to
+     * configure streams concurrently. Each camera device advertised in a
+     * combination MUST at the very least support the following streams while
+     * streaming concurrently with the other camera ids in the combination.
+     *
+     *       Target 1                  Target 2
+     * -----------------------------------------------------
+     * | Type         |   Size   |   Type       |   Size   |
+     * -----------------------------------------------------
+     * | YUV          |  s1440p  |                         |
+     * -----------------------------------------------------
+     * | JPEG         |  s1440p  |                         |
+     * -----------------------------------------------------
+     * | PRIV         |  s1440p  |                         |
+     * -----------------------------------------------------
+     * | YUV / PRIV   |  s720p   |  YUV / PRIV   | s1440p  |
+     * -----------------------------------------------------
+     * | YUV / PRIV   |  s720p   |  JPEG         | s1440p  |
+     * -----------------------------------------------------
+     *
+     * where:
+     * s720p - min (max output resolution for the given format, 1280 X 720)
+     * s1440p - min (max output resolution for the given format, 1920 X 1440)
+     *
+     * If a device has MONOCHROME capability (device's capabilities include
+     * ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME) and therefore supports Y8
+     * outputs, stream combinations mentioned above, where YUV is substituted by
+     * Y8 must be also supported.
+     *
+     * Devices whose capabilities do not include
+     * ANDROID_REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE, must support
+     * at least a single Y16 stream, Dataspace::DEPTH with sVGA resolution,
+     * during concurrent operation.
+     * Where sVGA -  min (max output resolution for the given format, 640 X 480)
+     *
+     * The camera framework must call this method whenever it gets a
+     * cameraDeviceStatusChange callback adding a new camera device or removing
+     * a camera device known to it. This is so that the camera framework can get new combinations
+     * of camera ids that can stream concurrently, that might have potentially appeared.
+     *
+     * For each combination (and their subsets) of camera device ids returned by
+     * getConcurrentStreamingCameraIds(): If only the mandatory combinations can
+     * be supported concurrently by each device, then the resource costs must
+     * sum up to > 100 for the concurrent set, to ensure arbitration between
+     * camera applications work as expected. Only if resources are sufficient
+     * to run a set of cameras at full capability (maximally
+     * resource-consuming framerate and stream size settings available in the
+     * configuration settings exposed through camera metadata), should the sum
+     * of resource costs for the combination be <= 100.
+     *
+     * For guaranteed concurrent camera operation, the camera framework must call
+     * ICameraDevice.open() on all devices (intended for concurrent operation), before configuring
+     * any streams on them. This gives the camera HAL process an opportunity to potentially
+     * distribute hardware resources better before stream configuration.
+     *
+     * Due to potential hardware constraints around internal switching of physical camera devices,
+     * a device's complete ZOOM_RATIO_RANGE(if supported), may not apply during concurrent
+     * operation. If ZOOM_RATIO is supported, camera HALs must ensure ZOOM_RATIO_RANGE of
+     * [1.0, ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM] is supported by that device, during
+     * concurrent operation.
+     *
+     * A service specific error will be returned in the following case :
+     *
+     * INTERNAL_ERROR: the hal has encountered an internal error
+     *
+     * @return a list of camera id combinations that support
+     *         concurrent stream configurations with the minimum guarantees
+     *         specified.
+     */
+    ConcurrentCameraIdCombination[] getConcurrentCameraIds();
+
+    /**
+     * isConcurrentStreamCombinationSupported:
+     *
+     * Check for device support of specific camera stream combinations while
+     * streaming concurrently with other devices.
+     *
+     * The per device streamList must contain at least one output-capable stream, and may
+     * not contain more than one input-capable stream.
+     * In contrast to regular stream configuration the framework does not create
+     * or initialize any actual streams. This means that Hal must not use or
+     * consider the stream "id" value.
+     *
+     * ------------------------------------------------------------------------
+     *
+     * Preconditions:
+     *
+     * The framework can call this method at any time before, during and
+     * after active session configuration per device. This means that calls must not
+     * impact the performance of pending camera requests in any way. In
+     * particular there must not be any glitches or delays during normal
+     * camera streaming.
+     *
+     * The framework must not call this method with any combination of camera
+     * ids that is not a subset of the camera ids advertised by getConcurrentStreamingCameraIds of
+     * the same provider.
+     *
+     * Performance requirements:
+     * This call is expected to be significantly faster than stream
+     * configuration. In general HW and SW camera settings must not be
+     * changed and there must not be a user-visible impact on camera performance.
+     *
+     * @param configs a vector of camera ids and their corresponding stream
+     *                configurations that need to be queried for support.
+     *
+     * On error, the service specific error for the operation will be, one of:
+     *     METHOD_NOT_SUPPORTED:
+     *          The camera provider does not support stream combination query.
+     *     INTERNAL_ERROR:
+     *          The stream combination query cannot complete due to internal
+     *          error.
+     * @return true in case the stream combination is supported, false otherwise.
+     *
+     *
+     */
+    boolean isConcurrentStreamCombinationSupported(in CameraIdAndStreamCombination[] configs);
+}
diff --git a/camera/provider/aidl/android/hardware/camera/provider/ICameraProviderCallback.aidl b/camera/provider/aidl/android/hardware/camera/provider/ICameraProviderCallback.aidl
new file mode 100644
index 0000000..a877637
--- /dev/null
+++ b/camera/provider/aidl/android/hardware/camera/provider/ICameraProviderCallback.aidl
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.camera.provider;
+
+import android.hardware.camera.common.CameraDeviceStatus;
+import android.hardware.camera.common.TorchModeStatus;
+
+@VintfStability
+interface ICameraProviderCallback {
+    /**
+     * cameraDeviceStatusChange:
+     *
+     * Callback to the camera service to indicate that the state of a specific
+     * camera device has changed.
+     *
+     * On camera service startup, when ICameraProvider::setCallback is invoked,
+     * the camera service must assume that all internal camera devices are in
+     * the CAMERA_DEVICE_STATUS_PRESENT state.
+     *
+     * The provider must call this method to inform the camera service of any
+     * initially NOT_PRESENT devices, and of any external camera devices that
+     * are already present, as soon as the callbacks are available through
+     * setCallback.
+     *
+     * @param cameraDeviceName The name of the camera device that has a new status.
+     * @param newStatus The new status that device is in.
+     *
+     */
+    void cameraDeviceStatusChange(String cameraDeviceName, CameraDeviceStatus newStatus);
+
+    /**
+     * torchModeStatusChange:
+     *
+     * Callback to the camera service to indicate that the state of the torch
+     * mode of the flash unit associated with a specific camera device has
+     * changed. At provider registration time, the camera service must assume
+     * the torch modes are in the TORCH_MODE_STATUS_AVAILABLE_OFF state if
+     * android.flash.info.available is reported as true via the
+     * ICameraDevice::getCameraCharacteristics call.
+     *
+     * @param cameraDeviceName The name of the camera device that has a
+     *     new status.
+     * @param newStatus The new status that the torch is in.
+     *
+     */
+    void torchModeStatusChange(String cameraDeviceName, TorchModeStatus newStatus);
+
+    /**
+     * cameraPhysicalDeviceStatusChange:
+     *
+     * Callback to the camera service to indicate that the state of a physical
+     * camera device of a logical multi-camera has changed.
+     *
+     * On camera service startup, when ICameraProvider::setCallback is invoked,
+     * the camera service must assume that all physical devices backing internal
+     * multi-camera devices are in the CAMERA_DEVICE_STATUS_PRESENT state.
+     *
+     * The provider must call this method to inform the camera service of any
+     * initially NOT_PRESENT physical devices, as soon as the callbacks are available
+     * through setCallback.
+     *
+     * @param cameraDeviceName The name of the logical multi-camera whose
+     *     physical camera has a new status.
+     * @param physicalCameraDeviceName The name of the physical camera device
+     *     that has a new status.
+     * @param newStatus The new status that device is in.
+     *
+     */
+    void physicalCameraDeviceStatusChange(
+            String cameraDeviceName, String physicalCameraDeviceName, CameraDeviceStatus newStatus);
+}
diff --git a/common/aidl/Android.bp b/common/aidl/Android.bp
index 028c923..549d970 100644
--- a/common/aidl/Android.bp
+++ b/common/aidl/Android.bp
@@ -30,6 +30,7 @@
         ndk: {
             apex_available: [
                 "//apex_available:platform",
+                "com.android.bluetooth",
                 "com.android.media.swcodec",
                 "com.android.neuralnetworks",
             ],
diff --git a/common/fmq/aidl/Android.bp b/common/fmq/aidl/Android.bp
index 842a75f..6fd4200 100644
--- a/common/fmq/aidl/Android.bp
+++ b/common/fmq/aidl/Android.bp
@@ -29,6 +29,13 @@
         cpp: {
             enabled: false,
         },
+        ndk: {
+            apex_available: [
+                "//apex_available:platform",
+                "com.android.bluetooth",
+            ],
+            min_sdk_version: "29",
+        },
     },
     versions: ["1"],
 }
diff --git a/compatibility_matrices/compatibility_matrix.current.xml b/compatibility_matrices/compatibility_matrix.current.xml
index 95ba217..fd961c8 100644
--- a/compatibility_matrices/compatibility_matrix.current.xml
+++ b/compatibility_matrices/compatibility_matrix.current.xml
@@ -187,6 +187,14 @@
             <regex-instance>[^/]+/[0-9]+</regex-instance>
         </interface>
     </hal>
+    <hal format="aidl" optional="true">
+        <name>android.hardware.camera.provider</name>
+        <version>1</version>
+        <interface>
+            <name>ICameraProvider</name>
+            <regex-instance>[^/]+/[0-9]+</regex-instance>
+        </interface>
+    </hal>
     <hal format="hidl" optional="true">
         <name>android.hardware.cas</name>
         <version>1.1-2</version>
@@ -300,7 +308,10 @@
             <instance>default</instance>
         </interface>
     </hal>
-    <hal format="hidl" optional="false">
+    <!-- Either the AIDL or the HIDL composer HAL must exist on the device.
+         If the HIDL composer HAL exists, it must be at least version 2.1.
+         See DeviceManifestTest.ComposerHal -->
+    <hal format="hidl" optional="true">
         <name>android.hardware.graphics.composer</name>
         <version>2.1-4</version>
         <interface>
@@ -435,7 +446,7 @@
     </hal>
     <hal format="aidl" optional="true">
         <name>android.hardware.light</name>
-        <version>1</version>
+        <version>2</version>
         <interface>
             <name>ILights</name>
             <instance>default</instance>
diff --git a/compatibility_matrices/exclude/fcm_exclude.cpp b/compatibility_matrices/exclude/fcm_exclude.cpp
index 414c502..6de9d03 100644
--- a/compatibility_matrices/exclude/fcm_exclude.cpp
+++ b/compatibility_matrices/exclude/fcm_exclude.cpp
@@ -53,6 +53,9 @@
             // AIDL
             "android.hardware.audio.common",
             "android.hardware.biometrics.common",
+            "android.hardware.camera.metadata",
+            "android.hardware.camera.device",
+            "android.hardware.camera.common",
             "android.hardware.common",
             "android.hardware.common.fmq",
             "android.hardware.graphics.common",
diff --git a/contexthub/aidl/Android.bp b/contexthub/aidl/Android.bp
index e9143b5..5926b77 100644
--- a/contexthub/aidl/Android.bp
+++ b/contexthub/aidl/Android.bp
@@ -24,6 +24,7 @@
 aidl_interface {
     name: "android.hardware.contexthub",
     vendor_available: true,
+    host_supported: true,
     srcs: ["android/hardware/contexthub/*.aidl"],
     stability: "vintf",
     backend: {
diff --git a/gnss/aidl/vts/gnss_hal_test_cases.cpp b/gnss/aidl/vts/gnss_hal_test_cases.cpp
index a4a0044..8e51b44 100644
--- a/gnss/aidl/vts/gnss_hal_test_cases.cpp
+++ b/gnss/aidl/vts/gnss_hal_test_cases.cpp
@@ -345,7 +345,7 @@
     auto powerStats1 = gnssPowerIndicationCallback->last_gnss_power_stats_;
 
     // Get a location and request another GnssPowerStats
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         gnss_cb_->location_cbq_.reset();
     } else {
         aidl_gnss_cb_->location_cbq_.reset();
@@ -424,18 +424,18 @@
     const int kLocationsToAwait = 3;
     const int kRetriesToUnBlocklist = 10;
 
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         gnss_cb_->location_cbq_.reset();
     } else {
         aidl_gnss_cb_->location_cbq_.reset();
     }
     StartAndCheckLocations(kLocationsToAwait);
-    int location_called_count = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+    int location_called_count = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                         ? gnss_cb_->location_cbq_.calledCount()
                                         : aidl_gnss_cb_->location_cbq_.calledCount();
 
     // Tolerate 1 less sv status to handle edge cases in reporting.
-    int sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+    int sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                         ? gnss_cb_->sv_info_list_cbq_.size()
                                         : aidl_gnss_cb_->sv_info_list_cbq_.size();
     EXPECT_GE(sv_info_list_cbq_size + 1, kLocationsToAwait);
@@ -450,7 +450,7 @@
 
     const int kGnssSvInfoListTimeout = 2;
     BlocklistedSource source_to_blocklist;
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         std::list<hidl_vec<IGnssCallback_2_1::GnssSvInfo>> sv_info_vec_list;
         int count = gnss_cb_->sv_info_list_cbq_.retrieve(sv_info_vec_list, sv_info_list_cbq_size,
                                                          kGnssSvInfoListTimeout);
@@ -488,7 +488,7 @@
     ASSERT_TRUE(status.isOk());
 
     // retry and ensure satellite not used
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         gnss_cb_->sv_info_list_cbq_.reset();
         gnss_cb_->location_cbq_.reset();
     } else {
@@ -499,7 +499,7 @@
     StartAndCheckLocations(kLocationsToAwait);
 
     // early exit if test is being run with insufficient signal
-    location_called_count = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+    location_called_count = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                     ? gnss_cb_->location_cbq_.calledCount()
                                     : aidl_gnss_cb_->location_cbq_.calledCount();
     if (location_called_count == 0) {
@@ -508,14 +508,14 @@
     ASSERT_TRUE(location_called_count > 0);
 
     // Tolerate 1 less sv status to handle edge cases in reporting.
-    sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+    sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                     ? gnss_cb_->sv_info_list_cbq_.size()
                                     : aidl_gnss_cb_->sv_info_list_cbq_.size();
     EXPECT_GE(sv_info_list_cbq_size + 1, kLocationsToAwait);
     ALOGD("Observed %d GnssSvInfo, while awaiting %d Locations (%d received)",
           sv_info_list_cbq_size, kLocationsToAwait, location_called_count);
     for (int i = 0; i < sv_info_list_cbq_size; ++i) {
-        if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+        if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
             hidl_vec<IGnssCallback_2_1::GnssSvInfo> sv_info_vec;
             gnss_cb_->sv_info_list_cbq_.retrieve(sv_info_vec, kGnssSvInfoListTimeout);
             for (uint32_t iSv = 0; iSv < sv_info_vec.size(); iSv++) {
@@ -550,7 +550,7 @@
     while (!strongest_sv_is_reobserved && (unblocklist_loops_remaining-- > 0)) {
         StopAndClearLocations();
 
-        if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+        if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
             gnss_cb_->sv_info_list_cbq_.reset();
             gnss_cb_->location_cbq_.reset();
         } else {
@@ -560,7 +560,7 @@
         StartAndCheckLocations(kLocationsToAwait);
 
         // early exit loop if test is being run with insufficient signal
-        location_called_count = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+        location_called_count = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                         ? gnss_cb_->location_cbq_.calledCount()
                                         : aidl_gnss_cb_->location_cbq_.calledCount();
         if (location_called_count == 0) {
@@ -569,7 +569,7 @@
         ASSERT_TRUE(location_called_count > 0);
 
         // Tolerate 1 less sv status to handle edge cases in reporting.
-        sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+        sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                         ? gnss_cb_->sv_info_list_cbq_.size()
                                         : aidl_gnss_cb_->sv_info_list_cbq_.size();
         EXPECT_GE(sv_info_list_cbq_size + 1, kLocationsToAwait);
@@ -578,7 +578,7 @@
               sv_info_list_cbq_size, kLocationsToAwait, unblocklist_loops_remaining);
 
         for (int i = 0; i < sv_info_list_cbq_size; ++i) {
-            if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+            if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
                 hidl_vec<IGnssCallback_2_1::GnssSvInfo> sv_info_vec;
                 gnss_cb_->sv_info_list_cbq_.retrieve(sv_info_vec, kGnssSvInfoListTimeout);
                 for (uint32_t iSv = 0; iSv < sv_info_vec.size(); iSv++) {
@@ -663,7 +663,7 @@
     ASSERT_TRUE(status.isOk());
 
     // retry and ensure constellation not used
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         gnss_cb_->sv_info_list_cbq_.reset();
         gnss_cb_->location_cbq_.reset();
     } else {
@@ -673,14 +673,14 @@
     StartAndCheckLocations(kLocationsToAwait);
 
     // Tolerate 1 less sv status to handle edge cases in reporting.
-    int sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+    int sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                         ? gnss_cb_->sv_info_list_cbq_.size()
                                         : aidl_gnss_cb_->sv_info_list_cbq_.size();
     EXPECT_GE(sv_info_list_cbq_size + 1, kLocationsToAwait);
     ALOGD("Observed %d GnssSvInfo, while awaiting %d Locations", sv_info_list_cbq_size,
           kLocationsToAwait);
     for (int i = 0; i < sv_info_list_cbq_size; ++i) {
-        if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+        if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
             hidl_vec<IGnssCallback_2_1::GnssSvInfo> sv_info_vec;
             gnss_cb_->sv_info_list_cbq_.retrieve(sv_info_vec, kGnssSvInfoListTimeout);
             for (uint32_t iSv = 0; iSv < sv_info_vec.size(); iSv++) {
@@ -766,7 +766,7 @@
     StopAndClearLocations();
 
     // retry and ensure constellation not used
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         gnss_cb_->sv_info_list_cbq_.reset();
         gnss_cb_->location_cbq_.reset();
     } else {
@@ -776,14 +776,14 @@
     StartAndCheckLocations(kLocationsToAwait);
 
     // Tolerate 1 less sv status to handle edge cases in reporting.
-    int sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() == 1)
+    int sv_info_list_cbq_size = (aidl_gnss_hal_->getInterfaceVersion() <= 1)
                                         ? gnss_cb_->sv_info_list_cbq_.size()
                                         : aidl_gnss_cb_->sv_info_list_cbq_.size();
     EXPECT_GE(sv_info_list_cbq_size + 1, kLocationsToAwait);
     ALOGD("Observed %d GnssSvInfo, while awaiting %d Locations", sv_info_list_cbq_size,
           kLocationsToAwait);
     for (int i = 0; i < sv_info_list_cbq_size; ++i) {
-        if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+        if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
             hidl_vec<IGnssCallback_2_1::GnssSvInfo> sv_info_vec;
             gnss_cb_->sv_info_list_cbq_.retrieve(sv_info_vec, kGnssSvInfoListTimeout);
             for (uint32_t iSv = 0; iSv < sv_info_vec.size(); iSv++) {
@@ -821,7 +821,7 @@
  * TestAllExtensions.
  */
 TEST_P(GnssHalTest, TestAllExtensions) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
 
@@ -863,7 +863,7 @@
  * 3. Sets SUPL server host/port.
  */
 TEST_P(GnssHalTest, TestAGnssExtension) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
     sp<IAGnss> iAGnss;
@@ -887,7 +887,7 @@
  * 3. Sets reference location.
  */
 TEST_P(GnssHalTest, TestAGnssRilExtension) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
     sp<IAGnssRil> iAGnssRil;
@@ -921,7 +921,7 @@
  * Ensures that GnssDebug values make sense.
  */
 TEST_P(GnssHalTest, GnssDebugValuesSanityTest) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
     sp<IGnssDebug> iGnssDebug;
@@ -970,7 +970,7 @@
  * 3. Sets proxy apps
  */
 TEST_P(GnssHalTest, TestGnssVisibilityControlExtension) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
     sp<IGnssVisibilityControl> iGnssVisibilityControl;
@@ -994,7 +994,7 @@
  *    and verifies mandatory fields are valid.
  */
 TEST_P(GnssHalTest, TestGnssMeasurementSetCallbackWithOptions) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
     const int kFirstGnssMeasurementTimeoutSeconds = 10;
@@ -1032,7 +1032,7 @@
  * 2. Sets a GnssMeasurementCallback, waits for a measurement.
  */
 TEST_P(GnssHalTest, TestGnssAgcInGnssMeasurement) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
     const int kFirstGnssMeasurementTimeoutSeconds = 10;
@@ -1078,7 +1078,7 @@
 TEST_P(GnssHalTest, TestGnssAntennaInfo) {
     const int kAntennaInfoTimeoutSeconds = 2;
 
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
 
@@ -1156,7 +1156,7 @@
  * capability flag is set.
  */
 TEST_P(GnssHalTest, TestGnssMeasurementCorrections) {
-    if (aidl_gnss_hal_->getInterfaceVersion() == 1) {
+    if (aidl_gnss_hal_->getInterfaceVersion() <= 1) {
         return;
     }
     if (!(aidl_gnss_cb_->last_capabilities_ &
diff --git a/graphics/OWNERS b/graphics/OWNERS
new file mode 100644
index 0000000..75ceb23
--- /dev/null
+++ b/graphics/OWNERS
@@ -0,0 +1,9 @@
+# Bug component: 1075130
+
+# Graphics team
+adyabr@google.com
+alecmouri@google.com
+chrisforbes@google.com
+jreck@google.com
+lpy@google.com
+sumir@google.com
\ No newline at end of file
diff --git a/graphics/allocator/aidl/vts/Android.bp b/graphics/allocator/aidl/vts/Android.bp
new file mode 100644
index 0000000..d74129b
--- /dev/null
+++ b/graphics/allocator/aidl/vts/Android.bp
@@ -0,0 +1,62 @@
+/**
+ * Copyright (c) 2021, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package {
+    // See: http://go/android-license-faq
+    // A large-scale-change added 'default_applicable_licenses' to import
+    // all of the 'license_kinds' from "hardware_interfaces_license"
+    // to get the below license kinds:
+    // SPDX-license-identifier-Apache-2.0
+    default_applicable_licenses: ["hardware_interfaces_license"],
+}
+
+cc_test {
+    name: "VtsHalGraphicsAllocatorAidl_TargetTest",
+    defaults: [
+        "VtsHalTargetTestDefaults",
+        "use_libaidlvintf_gtest_helper_static",
+    ],
+    srcs: [
+        "VtsHalGraphicsAllocatorAidl_TargetTest.cpp",
+    ],
+
+    shared_libs: [
+        "android.hardware.graphics.allocator-V1-ndk",
+        "android.hardware.graphics.common-V3-ndk",
+        "android.hardware.graphics.mapper@4.0",
+        "libEGL",
+        "libGLESv2",
+        "libbinder_ndk",
+        "libbase",
+        "libsync",
+        "libui",
+        "libgui",
+        "libhidlbase",
+        "libvndksupport",
+    ],
+    static_libs: [
+        "libaidlcommonsupport",
+        "libgtest",
+    ],
+    cflags: [
+        "-Wall",
+        "-Werror",
+    ],
+    test_suites: [
+        "general-tests",
+        "vts",
+    ],
+}
diff --git a/graphics/allocator/aidl/vts/VtsHalGraphicsAllocatorAidl_TargetTest.cpp b/graphics/allocator/aidl/vts/VtsHalGraphicsAllocatorAidl_TargetTest.cpp
new file mode 100644
index 0000000..784bc66
--- /dev/null
+++ b/graphics/allocator/aidl/vts/VtsHalGraphicsAllocatorAidl_TargetTest.cpp
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2022 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "VtsHalGraphicsAllocatorAidl_TargetTest"
+
+#include <aidl/Vintf.h>
+#include <aidl/android/hardware/graphics/allocator/AllocationError.h>
+#include <aidl/android/hardware/graphics/allocator/AllocationResult.h>
+#include <aidl/android/hardware/graphics/allocator/IAllocator.h>
+#include <aidl/android/hardware/graphics/common/BufferUsage.h>
+#include <aidl/android/hardware/graphics/common/PixelFormat.h>
+#include <aidlcommonsupport/NativeHandle.h>
+#include <android/binder_manager.h>
+#include <android/hardware/graphics/mapper/4.0/IMapper.h>
+#include <gtest/gtest.h>
+#include <hidl/GtestPrinter.h>
+#include <hidl/ServiceManagement.h>
+#include <initializer_list>
+#include <optional>
+#include <string>
+#include <tuple>
+
+using namespace aidl::android::hardware::graphics::allocator;
+using namespace aidl::android::hardware::graphics::common;
+using namespace android;
+using namespace android::hardware;
+using namespace android::hardware::graphics::mapper::V4_0;
+
+static constexpr uint64_t pack(const std::initializer_list<BufferUsage>& usages) {
+    uint64_t ret = 0;
+    for (const auto u : usages) {
+        ret |= static_cast<uint64_t>(u);
+    }
+    return ret;
+}
+
+static constexpr hardware::graphics::common::V1_2::PixelFormat cast(PixelFormat format) {
+    return static_cast<hardware::graphics::common::V1_2::PixelFormat>(format);
+}
+
+class BufferHandle {
+    sp<IMapper> mMapper;
+    native_handle_t* mRawHandle;
+    bool mImported = false;
+    uint32_t mStride;
+
+    BufferHandle(const BufferHandle&) = delete;
+    void operator=(const BufferHandle&) = delete;
+
+  public:
+    BufferHandle(const sp<IMapper> mapper, native_handle_t* handle, bool imported, uint32_t stride)
+        : mMapper(mapper), mRawHandle(handle), mImported(imported), mStride(stride) {}
+
+    ~BufferHandle() {
+        if (mRawHandle == nullptr) return;
+
+        if (mImported) {
+            Error error = mMapper->freeBuffer(mRawHandle);
+            EXPECT_EQ(Error::NONE, error) << "failed to free buffer " << mRawHandle;
+        } else {
+            native_handle_close(mRawHandle);
+            native_handle_delete(mRawHandle);
+        }
+    }
+
+    uint32_t stride() const { return mStride; }
+};
+
+class GraphicsAllocatorAidlTests
+    : public ::testing::TestWithParam<std::tuple<std::string, std::string>> {
+  private:
+    std::shared_ptr<IAllocator> mAllocator;
+    sp<IMapper> mMapper;
+
+  public:
+    void SetUp() override {
+        mAllocator = IAllocator::fromBinder(
+                ndk::SpAIBinder(AServiceManager_checkService(std::get<0>(GetParam()).c_str())));
+        mMapper = IMapper::getService(std::get<1>(GetParam()));
+
+        ASSERT_NE(nullptr, mAllocator.get()) << "failed to get allocator service";
+        ASSERT_NE(nullptr, mMapper.get()) << "failed to get mapper service";
+        ASSERT_FALSE(mMapper->isRemote()) << "mapper is not in passthrough mode";
+    }
+
+    void TearDown() override {}
+
+    BufferDescriptor createDescriptor(const IMapper::BufferDescriptorInfo& descriptorInfo) {
+        BufferDescriptor descriptor;
+        mMapper->createDescriptor(
+                descriptorInfo, [&](const auto& tmpError, const auto& tmpDescriptor) {
+                    ASSERT_EQ(Error::NONE, tmpError) << "failed to create descriptor";
+                    descriptor = tmpDescriptor;
+                });
+
+        return descriptor;
+    }
+
+    native_handle_t* importBuffer(const hidl_handle& rawHandle) {
+        native_handle_t* bufferHandle = nullptr;
+        mMapper->importBuffer(rawHandle, [&](const auto& tmpError, const auto& tmpBuffer) {
+            ASSERT_EQ(Error::NONE, tmpError)
+                    << "failed to import buffer %p" << rawHandle.getNativeHandle();
+            bufferHandle = static_cast<native_handle_t*>(tmpBuffer);
+        });
+        return bufferHandle;
+    }
+
+    std::unique_ptr<BufferHandle> allocate(const IMapper::BufferDescriptorInfo& descriptorInfo,
+                                           bool import = false) {
+        auto descriptor = createDescriptor(descriptorInfo);
+        if (::testing::Test::HasFatalFailure()) {
+            return nullptr;
+        }
+
+        AllocationResult result;
+        auto status = mAllocator->allocate(descriptor, 1, &result);
+        if (!status.isOk()) {
+            status_t error = status.getExceptionCode();
+            if (error == EX_SERVICE_SPECIFIC) {
+                error = status.getServiceSpecificError();
+                EXPECT_NE(OK, error) << "Failed to set error properly";
+                EXPECT_EQ(OK, error) << "Failed to allocate";
+            } else {
+                EXPECT_EQ(OK, error) << "Allocation transport failure";
+            }
+            return nullptr;
+        } else {
+            if (import) {
+                native_handle_t* importedHandle = importBuffer(makeFromAidl(result.buffers[0]));
+                if (importedHandle) {
+                    return std::make_unique<BufferHandle>(mMapper, importedHandle, true,
+                                                          result.stride);
+                } else {
+                    return nullptr;
+                }
+            } else {
+                return std::make_unique<BufferHandle>(mMapper, dupFromAidl(result.buffers[0]),
+                                                      false, result.stride);
+            }
+        }
+    }
+};
+
+TEST_P(GraphicsAllocatorAidlTests, CreateDescriptorBasic) {
+    ASSERT_NO_FATAL_FAILURE(createDescriptor({
+            .name = "CPU_8888",
+            .width = 64,
+            .height = 64,
+            .layerCount = 1,
+            .format = cast(PixelFormat::RGBA_8888),
+            .usage = pack({BufferUsage::CPU_WRITE_OFTEN, BufferUsage::CPU_READ_OFTEN}),
+            .reservedSize = 0,
+    }));
+}
+
+TEST_P(GraphicsAllocatorAidlTests, CanAllocate) {
+    auto buffer = allocate({
+            .name = "CPU_8888",
+            .width = 64,
+            .height = 64,
+            .layerCount = 1,
+            .format = cast(PixelFormat::RGBA_8888),
+            .usage = pack({BufferUsage::CPU_WRITE_OFTEN, BufferUsage::CPU_READ_OFTEN}),
+            .reservedSize = 0,
+    });
+    ASSERT_NE(nullptr, buffer.get());
+    EXPECT_GE(buffer->stride(), 64);
+}
+
+GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(GraphicsAllocatorAidlTests);
+INSTANTIATE_TEST_CASE_P(
+        PerInstance, GraphicsAllocatorAidlTests,
+        testing::Combine(testing::ValuesIn(getAidlHalInstanceNames(IAllocator::descriptor)),
+                         testing::ValuesIn(getAllHalInstanceNames(IMapper::descriptor))),
+        PrintInstanceTupleNameToString<>);
\ No newline at end of file
diff --git a/identity/aidl/vts/src/com/android/tests/security/identity/IdentityCredentialImplementedTest.java b/identity/aidl/vts/src/com/android/tests/security/identity/IdentityCredentialImplementedTest.java
index 541a38a..19568af 100644
--- a/identity/aidl/vts/src/com/android/tests/security/identity/IdentityCredentialImplementedTest.java
+++ b/identity/aidl/vts/src/com/android/tests/security/identity/IdentityCredentialImplementedTest.java
@@ -42,14 +42,14 @@
         return Integer.parseInt(vendorApiLevelString);
     }
 
-    // As of Android 13 (API level 31), Identity Credential is required at feature version 202201
+    // As of Android 13 (API level 32), Identity Credential is required at feature version 202201
     // or newer.
     //
     @RequiresDevice
     @Test
     public void testIdentityCredentialIsImplemented() throws Exception {
         int vendorApiLevel = getVendorApiLevel();
-        assumeTrue(vendorApiLevel >= 31);
+        assumeTrue(vendorApiLevel >= 32);
 
         final String minimumFeatureVersionNeeded = "202201";
 
diff --git a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/BrightnessMode.aidl b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/BrightnessMode.aidl
index c4c6d64..8813907 100644
--- a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/BrightnessMode.aidl
+++ b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/BrightnessMode.aidl
@@ -1,14 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 ///////////////////////////////////////////////////////////////////////////////
 // THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
 ///////////////////////////////////////////////////////////////////////////////
 
-// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
-// edit this file. It looks like you are doing that because you have modified
-// an AIDL interface in a backward-incompatible way, e.g., deleting a function
-// from an interface or a field from a parcelable and it broke the build. That
-// breakage is intended.
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
 //
-// You must not make a backward incompatible changes to the AIDL files built
+// You must not make a backward incompatible change to any AIDL file built
 // with the aidl_interface module type with versions property set. The module
 // type is used to build AIDL files in a way that they can be used across
 // independently updatable components of the system. If a device is shipped
diff --git a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/FlashMode.aidl b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/FlashMode.aidl
index 349f9f3..0411f82 100644
--- a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/FlashMode.aidl
+++ b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/FlashMode.aidl
@@ -1,14 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 ///////////////////////////////////////////////////////////////////////////////
 // THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
 ///////////////////////////////////////////////////////////////////////////////
 
-// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
-// edit this file. It looks like you are doing that because you have modified
-// an AIDL interface in a backward-incompatible way, e.g., deleting a function
-// from an interface or a field from a parcelable and it broke the build. That
-// breakage is intended.
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
 //
-// You must not make a backward incompatible changes to the AIDL files built
+// You must not make a backward incompatible change to any AIDL file built
 // with the aidl_interface module type with versions property set. The module
 // type is used to build AIDL files in a way that they can be used across
 // independently updatable components of the system. If a device is shipped
diff --git a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLight.aidl b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLight.aidl
index c397f91..25a2dce 100644
--- a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLight.aidl
+++ b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLight.aidl
@@ -1,14 +1,30 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 ///////////////////////////////////////////////////////////////////////////////
 // THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
 ///////////////////////////////////////////////////////////////////////////////
 
-// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
-// edit this file. It looks like you are doing that because you have modified
-// an AIDL interface in a backward-incompatible way, e.g., deleting a function
-// from an interface or a field from a parcelable and it broke the build. That
-// breakage is intended.
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
 //
-// You must not make a backward incompatible changes to the AIDL files built
+// You must not make a backward incompatible change to any AIDL file built
 // with the aidl_interface module type with versions property set. The module
 // type is used to build AIDL files in a way that they can be used across
 // independently updatable components of the system. If a device is shipped
diff --git a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLightState.aidl b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLightState.aidl
index 44a0882..40e520b 100644
--- a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLightState.aidl
+++ b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/HwLightState.aidl
@@ -1,14 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 ///////////////////////////////////////////////////////////////////////////////
 // THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
 ///////////////////////////////////////////////////////////////////////////////
 
-// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
-// edit this file. It looks like you are doing that because you have modified
-// an AIDL interface in a backward-incompatible way, e.g., deleting a function
-// from an interface or a field from a parcelable and it broke the build. That
-// breakage is intended.
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
 //
-// You must not make a backward incompatible changes to the AIDL files built
+// You must not make a backward incompatible change to any AIDL file built
 // with the aidl_interface module type with versions property set. The module
 // type is used to build AIDL files in a way that they can be used across
 // independently updatable components of the system. If a device is shipped
diff --git a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/ILights.aidl b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/ILights.aidl
index fc6c626..30bb3c3 100644
--- a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/ILights.aidl
+++ b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/ILights.aidl
@@ -1,14 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 ///////////////////////////////////////////////////////////////////////////////
 // THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
 ///////////////////////////////////////////////////////////////////////////////
 
-// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
-// edit this file. It looks like you are doing that because you have modified
-// an AIDL interface in a backward-incompatible way, e.g., deleting a function
-// from an interface or a field from a parcelable and it broke the build. That
-// breakage is intended.
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
 //
-// You must not make a backward incompatible changes to the AIDL files built
+// You must not make a backward incompatible change to any AIDL file built
 // with the aidl_interface module type with versions property set. The module
 // type is used to build AIDL files in a way that they can be used across
 // independently updatable components of the system. If a device is shipped
diff --git a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/LightType.aidl b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/LightType.aidl
index 77ab98c..2b978ab 100644
--- a/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/LightType.aidl
+++ b/light/aidl/aidl_api/android.hardware.light/current/android/hardware/light/LightType.aidl
@@ -1,14 +1,30 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
 ///////////////////////////////////////////////////////////////////////////////
 // THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //
 ///////////////////////////////////////////////////////////////////////////////
 
-// This file is a snapshot of an AIDL interface (or parcelable). Do not try to
-// edit this file. It looks like you are doing that because you have modified
-// an AIDL interface in a backward-incompatible way, e.g., deleting a function
-// from an interface or a field from a parcelable and it broke the build. That
-// breakage is intended.
+// This file is a snapshot of an AIDL file. Do not edit it manually. There are
+// two cases:
+// 1). this is a frozen version file - do not edit this in any case.
+// 2). this is a 'current' file. If you make a backwards compatible change to
+//     the interface (from the latest frozen version), the build system will
+//     prompt you to update this file with `m <name>-update-api`.
 //
-// You must not make a backward incompatible changes to the AIDL files built
+// You must not make a backward incompatible change to any AIDL file built
 // with the aidl_interface module type with versions property set. The module
 // type is used to build AIDL files in a way that they can be used across
 // independently updatable components of the system. If a device is shipped
@@ -27,4 +43,5 @@
   BLUETOOTH = 6,
   WIFI = 7,
   MICROPHONE = 8,
+  CAMERA = 9,
 }
diff --git a/light/aidl/android/hardware/light/LightType.aidl b/light/aidl/android/hardware/light/LightType.aidl
index 9a7f656..f7161d0 100644
--- a/light/aidl/android/hardware/light/LightType.aidl
+++ b/light/aidl/android/hardware/light/LightType.aidl
@@ -32,4 +32,5 @@
     BLUETOOTH = 6,
     WIFI = 7,
     MICROPHONE = 8,
+    CAMERA = 9,
 }
diff --git a/light/aidl/default/Android.bp b/light/aidl/default/Android.bp
index 2ccf140..7920503 100644
--- a/light/aidl/default/Android.bp
+++ b/light/aidl/default/Android.bp
@@ -16,7 +16,7 @@
     shared_libs: [
         "libbase",
         "libbinder_ndk",
-        "android.hardware.light-V1-ndk",
+        "android.hardware.light-V2-ndk",
     ],
     srcs: [
         "Lights.cpp",
diff --git a/light/aidl/default/lights-default.xml b/light/aidl/default/lights-default.xml
index db604d6..abdd74e 100644
--- a/light/aidl/default/lights-default.xml
+++ b/light/aidl/default/lights-default.xml
@@ -1,6 +1,7 @@
 <manifest version="1.0" type="device">
     <hal format="aidl">
         <name>android.hardware.light</name>
+        <version>2</version>
         <fqname>ILights/default</fqname>
     </hal>
 </manifest>
diff --git a/radio/1.0/Android.bp b/radio/1.0/Android.bp
index cd64bca..8d0d782 100644
--- a/radio/1.0/Android.bp
+++ b/radio/1.0/Android.bp
@@ -23,5 +23,9 @@
     interfaces: [
         "android.hidl.base@1.0",
     ],
+    apex_available: [
+        "//apex_available:platform",
+        "com.android.bluetooth",
+    ],
     gen_java: true,
 }
diff --git a/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl b/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl
index b0761bf..153a04f 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/DeviceInfo.aidl
@@ -27,29 +27,27 @@
 @VintfStability
 parcelable DeviceInfo {
     /**
-     * DeviceInfo is a CBOR Map structure described by the following CDDL.
+     * DeviceInfo is a CBOR Map structure described by the following CDDL. DeviceInfo must be
+     * canonicalized according to the specification in RFC 7049. The ordering presented here is
+     * non-canonical to group similar entries semantically.
      *
      *     DeviceInfo = {
-     *         ? "brand" : tstr,
-     *         ? "manufacturer" : tstr,
-     *         ? "product" : tstr,
-     *         ? "model" : tstr,
-     *         ? "board" : tstr,
-     *         ? "vb_state" : "green" / "yellow" / "orange",    // Taken from the AVB values
-     *         ? "bootloader_state" : "locked" / "unlocked",    // Taken from the AVB values
-     *         ? "vbmeta_digest": bstr,                         // Taken from the AVB values
-     *         ? "os_version" : tstr,                    // Same as android.os.Build.VERSION.release
-     *         ? "system_patch_level" : uint,                   // YYYYMMDD
-     *         ? "boot_patch_level" : uint,                     // YYYYMMDD
-     *         ? "vendor_patch_level" : uint,                   // YYYYMMDD
-     *         "version" : 1,                      // The CDDL schema version.
-     *         "security_level" : "tee" / "strongbox"
-     *         "att_id_state": "locked" / "open",  // Attestation IDs State. If "locked", this
-     *                                             // indicates a device's attestable IDs are
-     *                                             // factory-locked and immutable. If "open",
-     *                                             // this indicates the device is still in a
-     *                                             // provisionable state and the attestable IDs
-     *                                             // are not yet frozen.
+     *         "brand" : tstr,
+     *         "manufacturer" : tstr,
+     *         "product" : tstr,
+     *         "model" : tstr,
+     *         "device" : tstr,
+     *         "vb_state" : "green" / "yellow" / "orange",    // Taken from the AVB values
+     *         "bootloader_state" : "locked" / "unlocked",    // Taken from the AVB values
+     *         "vbmeta_digest": bstr,                         // Taken from the AVB values
+     *         "os_version" : tstr,                      // Same as android.os.Build.VERSION.release
+     *         "system_patch_level" : uint,                   // YYYYMMDD
+     *         "boot_patch_level" : uint,                     // YYYYMMDD
+     *         "vendor_patch_level" : uint,                   // YYYYMMDD
+     *         "version" : 2,                                 // The CDDL schema version.
+     *         "security_level" : "tee" / "strongbox",
+     *         "fused": 1 / 0,  // 1 if secure boot is enforced for the processor that the IRPC
+     *                          // implementation is contained in. 0 otherwise.
      *     }
      */
     byte[] deviceInfo;
diff --git a/security/keymint/aidl/android/hardware/security/keymint/MacedPublicKey.aidl b/security/keymint/aidl/android/hardware/security/keymint/MacedPublicKey.aidl
index 62a48e9..ad97443 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/MacedPublicKey.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/MacedPublicKey.aidl
@@ -37,10 +37,10 @@
      *
      *     PublicKey = {               // COSE_Key
      *         1 : 2,                  // Key type : EC2
-     *         3 : -8                  // Algorithm : ES256
-     *         -1 : 6,                 // Curve : P256
-     *         -2 : bstr               // X coordinate, little-endian
-     *         -3 : bstr               // Y coordinate, little-endian
+     *         3 : -7,                 // Algorithm : ES256
+     *         -1 : 1,                 // Curve : P256
+     *         -2 : bstr,              // X coordinate, little-endian
+     *         -3 : bstr,              // Y coordinate, little-endian
      *         ? -70000 : nil          // Presence indicates this is a test key.  If set, K_mac is
      *                                 // all zeros.
      *     },
diff --git a/security/keymint/aidl/android/hardware/security/keymint/ProtectedData.aidl b/security/keymint/aidl/android/hardware/security/keymint/ProtectedData.aidl
index 24cdbc1..a14fc88 100644
--- a/security/keymint/aidl/android/hardware/security/keymint/ProtectedData.aidl
+++ b/security/keymint/aidl/android/hardware/security/keymint/ProtectedData.aidl
@@ -169,7 +169,6 @@
      *     PubKeyEd25519 = {                // COSE_Key
      *         1 : 1,                         // Key type : octet key pair
      *         3 : AlgorithmEdDSA,            // Algorithm : EdDSA
-     *         4 : 2,                         // Ops: Verify
      *         -1 : 6,                        // Curve : Ed25519
      *         -2 : bstr                      // X coordinate, little-endian
      *     }
@@ -184,7 +183,6 @@
      *     PubKeyECDSA256 = {                 // COSE_Key
      *         1 : 2,                         // Key type : EC2
      *         3 : AlgorithmES256,            // Algorithm : ECDSA w/ SHA-256
-     *         4 : 2,                         // Ops: Verify
      *         -1 : 1,                        // Curve: P256
      *         -2 : bstr,                     // X coordinate
      *         -3 : bstr                      // Y coordinate
diff --git a/security/keymint/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp b/security/keymint/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
index 829780d..927d7d7 100644
--- a/security/keymint/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
+++ b/security/keymint/aidl/vts/functional/VtsRemotelyProvisionedComponentTests.cpp
@@ -57,6 +57,22 @@
 using namespace remote_prov;
 using namespace keymaster;
 
+std::set<std::string> getAllowedVbStates() {
+    return {"green", "yellow", "orange"};
+}
+
+std::set<std::string> getAllowedBootloaderStates() {
+    return {"locked", "unlocked"};
+}
+
+std::set<std::string> getAllowedSecurityLevels() {
+    return {"tee", "strongbox"};
+}
+
+std::set<std::string> getAllowedAttIdStates() {
+    return {"locked", "open"};
+}
+
 bytevec string_to_bytevec(const char* s) {
     const uint8_t* p = reinterpret_cast<const uint8_t*>(s);
     return bytevec(p, p + strlen(s));
@@ -406,6 +422,8 @@
         ASSERT_TRUE(deviceInfoMap) << "Failed to parse deviceInfo: " << deviceInfoErrMsg;
         ASSERT_TRUE(deviceInfoMap->asMap());
 
+        checkDeviceInfo(deviceInfoMap->asMap(), deviceInfo.deviceInfo);
+
         auto& signingKey = bccContents->back().pubKey;
         auto macKey = verifyAndParseCoseSign1(signedMac->asArray(), signingKey,
                                               cppbor::Array()  // SignedMacAad
@@ -432,6 +450,78 @@
         }
     }
 
+    void checkType(const cppbor::Map* devInfo, uint8_t majorType, std::string entryName) {
+        const auto& val = devInfo->get(entryName);
+        ASSERT_TRUE(val) << entryName << " does not exist";
+        ASSERT_EQ(val->type(), majorType) << entryName << " has the wrong type.";
+        switch (majorType) {
+            case cppbor::TSTR:
+                ASSERT_GT(val->asTstr()->value().size(), 0);
+                break;
+            case cppbor::BSTR:
+                ASSERT_GT(val->asBstr()->value().size(), 0);
+                break;
+            default:
+                break;
+        }
+    }
+
+    void checkDeviceInfo(const cppbor::Map* deviceInfo, bytevec deviceInfoBytes) {
+        const auto& version = deviceInfo->get("version");
+        ASSERT_TRUE(version);
+        ASSERT_TRUE(version->asUint());
+        RpcHardwareInfo info;
+        provisionable_->getHardwareInfo(&info);
+        ASSERT_EQ(version->asUint()->value(), info.versionNumber);
+        std::set<std::string> allowList;
+        switch (version->asUint()->value()) {
+            // These fields became mandated in version 2.
+            case 2:
+                checkType(deviceInfo, cppbor::TSTR, "brand");
+                checkType(deviceInfo, cppbor::TSTR, "manufacturer");
+                checkType(deviceInfo, cppbor::TSTR, "product");
+                checkType(deviceInfo, cppbor::TSTR, "model");
+                checkType(deviceInfo, cppbor::TSTR, "device");
+                // TODO: Refactor the KeyMint code that validates these fields and include it here.
+                checkType(deviceInfo, cppbor::TSTR, "vb_state");
+                allowList = getAllowedVbStates();
+                ASSERT_NE(allowList.find(deviceInfo->get("vb_state")->asTstr()->value()),
+                          allowList.end());
+                checkType(deviceInfo, cppbor::TSTR, "bootloader_state");
+                allowList = getAllowedBootloaderStates();
+                ASSERT_NE(allowList.find(deviceInfo->get("bootloader_state")->asTstr()->value()),
+                          allowList.end());
+                checkType(deviceInfo, cppbor::BSTR, "vbmeta_digest");
+                checkType(deviceInfo, cppbor::TSTR, "os_version");
+                checkType(deviceInfo, cppbor::UINT, "system_patch_level");
+                checkType(deviceInfo, cppbor::UINT, "boot_patch_level");
+                checkType(deviceInfo, cppbor::UINT, "vendor_patch_level");
+                checkType(deviceInfo, cppbor::UINT, "fused");
+                ASSERT_LT(deviceInfo->get("fused")->asUint()->value(), 2);  // Must be 0 or 1.
+                checkType(deviceInfo, cppbor::TSTR, "security_level");
+                allowList = getAllowedSecurityLevels();
+                ASSERT_NE(allowList.find(deviceInfo->get("security_level")->asTstr()->value()),
+                          allowList.end());
+                break;
+            case 1:
+                checkType(deviceInfo, cppbor::TSTR, "security_level");
+                allowList = getAllowedSecurityLevels();
+                ASSERT_NE(allowList.find(deviceInfo->get("security_level")->asTstr()->value()),
+                          allowList.end());
+                if (version->asUint()->value() == 1) {
+                    checkType(deviceInfo, cppbor::TSTR, "att_id_state");
+                    allowList = getAllowedAttIdStates();
+                    ASSERT_NE(allowList.find(deviceInfo->get("att_id_state")->asTstr()->value()),
+                              allowList.end());
+                }
+                break;
+            default:
+                FAIL() << "Unrecognized version: " << version->asUint()->value();
+        }
+        ASSERT_EQ(deviceInfo->clone()->asMap()->canonicalize().encode(), deviceInfoBytes)
+                << "DeviceInfo ordering is non-canonical.";
+    }
+
     bytevec eekId_;
     size_t testEekLength_;
     EekChain testEekChain_;
diff --git a/sensors/aidl/android/hardware/sensors/SensorInfo.aidl b/sensors/aidl/android/hardware/sensors/SensorInfo.aidl
index 35caf8b..065642a 100644
--- a/sensors/aidl/android/hardware/sensors/SensorInfo.aidl
+++ b/sensors/aidl/android/hardware/sensors/SensorInfo.aidl
@@ -21,7 +21,7 @@
 @VintfStability
 parcelable SensorInfo {
     /**
-     * handle that identifies this sensors. This handle is used to reference
+     * Handle that identifies this sensors. This handle is used to reference
      * this sensor throughout the HAL API.
      */
     int sensorHandle;
@@ -33,25 +33,25 @@
     String name;
 
     /**
-     * vendor of the hardware part
+     * Vendor of the hardware part.
      */
     String vendor;
 
     /**
-     * version of the hardware part + driver. The value of this field
-     * must increase when the driver is updated in a way that changes the
-     * output of this sensor. This is important for fused sensors when the
-     * fusion algorithm is updated.
+     * Version of the hardware part + driver, used for informational purposes.
+     * The value of this field must increase when the driver is updated in a
+     * way that changes the output of this sensor. This is important for fused
+     * sensors when the fusion algorithm is updated.
      */
     int version;
 
     /**
-     * this sensor's type.
+     * This sensor's type.
      */
     SensorType type;
 
     /**
-     * type of this sensor as a string.
+     * Type of this sensor as a string.
      *
      * When defining an OEM specific sensor or sensor manufacturer specific
      * sensor, use your reserve domain name as a prefix.
@@ -63,22 +63,22 @@
     String typeAsString;
 
     /**
-     * maximum range of this sensor's value in SI units
+     * Maximum range of this sensor's value in SI units
      */
     float maxRange;
 
     /**
-     * smallest difference between two values reported by this sensor
+     * Smallest difference between two values reported by this sensor
      */
     float resolution;
 
     /**
-     * rough estimate of this sensor's power consumption in mA
+     * Rough estimate of this sensor's power consumption in mA
      */
     float power;
 
     /**
-     * this value depends on the reporting mode:
+     * This value depends on the reporting mode:
      *
      *   continuous: minimum sample period allowed in microseconds
      *   on-change : 0
@@ -88,7 +88,7 @@
     int minDelayUs;
 
     /**
-     * number of events reserved for this sensor in the batch mode FIFO.
+     * Number of events reserved for this sensor in the batch mode FIFO.
      * If there is a dedicated FIFO for this sensor, then this is the
      * size of this FIFO. If the FIFO is shared with other sensors,
      * this is the size reserved for that sensor and it can be zero.
@@ -96,14 +96,14 @@
     int fifoReservedEventCount;
 
     /**
-     * maximum number of events of this sensor that could be batched.
+     * Maximum number of events of this sensor that could be batched.
      * This is especially relevant when the FIFO is shared between
      * several sensors; this value is then set to the size of that FIFO.
      */
     int fifoMaxEventCount;
 
     /**
-     * permission required to see this sensor, register to it and receive data.
+     * Permission required to see this sensor, register to it and receive data.
      * Set to "" if no permission is required. Some sensor types like the
      * heart rate monitor have a mandatory require_permission.
      * For sensors that always require a specific permission, like the heart
diff --git a/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.cpp b/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.cpp
index 114fe4f..086166a 100644
--- a/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.cpp
+++ b/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.cpp
@@ -69,37 +69,6 @@
 // disable.
 bool waitForSupplicantStop() { return waitForSupplicantState(false); }
 
-// Helper function to initialize the driver and firmware to STA mode
-// using the vendor HAL HIDL interface.
-void initilializeDriverAndFirmware(const std::string& wifi_instance_name) {
-    // Skip if wifi instance is not set.
-    if (wifi_instance_name == "") {
-        return;
-    }
-    if (getWifi(wifi_instance_name) != nullptr) {
-        sp<IWifiChip> wifi_chip = getWifiChip(wifi_instance_name);
-        ChipModeId mode_id;
-        EXPECT_TRUE(configureChipToSupportIfaceType(
-            wifi_chip, ::android::hardware::wifi::V1_0::IfaceType::STA, &mode_id));
-    } else {
-        LOG(WARNING) << __func__ << ": Vendor HAL not supported";
-    }
-}
-
-// Helper function to deinitialize the driver and firmware
-// using the vendor HAL HIDL interface.
-void deInitilializeDriverAndFirmware(const std::string& wifi_instance_name) {
-    // Skip if wifi instance is not set.
-    if (wifi_instance_name == "") {
-        return;
-    }
-    if (getWifi(wifi_instance_name) != nullptr) {
-        stopWifi(wifi_instance_name);
-    } else {
-        LOG(WARNING) << __func__ << ": Vendor HAL not supported";
-    }
-}
-
 // Helper function to find any iface of the desired type exposed.
 bool findIfaceOfType(sp<ISupplicant> supplicant, IfaceType desired_type,
                      ISupplicant::IfaceInfo* out_info) {
@@ -156,14 +125,46 @@
     SupplicantManager supplicant_manager;
 
     ASSERT_TRUE(supplicant_manager.StopSupplicant());
-    deInitilializeDriverAndFirmware(wifi_instance_name);
+    deInitializeDriverAndFirmware(wifi_instance_name);
     ASSERT_FALSE(supplicant_manager.IsSupplicantRunning());
 }
 
+// Helper function to initialize the driver and firmware to STA mode
+// using the vendor HAL HIDL interface.
+void initializeDriverAndFirmware(const std::string& wifi_instance_name) {
+    // Skip if wifi instance is not set.
+    if (wifi_instance_name == "") {
+        return;
+    }
+    if (getWifi(wifi_instance_name) != nullptr) {
+        sp<IWifiChip> wifi_chip = getWifiChip(wifi_instance_name);
+        ChipModeId mode_id;
+        EXPECT_TRUE(configureChipToSupportIfaceType(
+            wifi_chip, ::android::hardware::wifi::V1_0::IfaceType::STA,
+            &mode_id));
+    } else {
+        LOG(WARNING) << __func__ << ": Vendor HAL not supported";
+    }
+}
+
+// Helper function to deinitialize the driver and firmware
+// using the vendor HAL HIDL interface.
+void deInitializeDriverAndFirmware(const std::string& wifi_instance_name) {
+    // Skip if wifi instance is not set.
+    if (wifi_instance_name == "") {
+        return;
+    }
+    if (getWifi(wifi_instance_name) != nullptr) {
+        stopWifi(wifi_instance_name);
+    } else {
+        LOG(WARNING) << __func__ << ": Vendor HAL not supported";
+    }
+}
+
 void startSupplicantAndWaitForHidlService(
     const std::string& wifi_instance_name,
     const std::string& supplicant_instance_name) {
-    initilializeDriverAndFirmware(wifi_instance_name);
+    initializeDriverAndFirmware(wifi_instance_name);
 
     SupplicantManager supplicant_manager;
     ASSERT_TRUE(supplicant_manager.StartSupplicant());
diff --git a/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.h b/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.h
index 22cea8c..7228623 100644
--- a/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.h
+++ b/wifi/supplicant/1.0/vts/functional/supplicant_hidl_test_utils.h
@@ -42,6 +42,11 @@
     const std::string& wifi_instance_name,
     const std::string& supplicant_instance_name);
 
+// Used to initialize/deinitialize the driver and firmware at the
+// beginning and end of each test.
+void initializeDriverAndFirmware(const std::string& wifi_instance_name);
+void deInitializeDriverAndFirmware(const std::string& wifi_instance_name);
+
 // Helper functions to obtain references to the various HIDL interface objects.
 // Note: We only have a single instance of each of these objects currently.
 // These helper functions should be modified to return vectors if we support
diff --git a/wifi/supplicant/aidl/vts/functional/Android.bp b/wifi/supplicant/aidl/vts/functional/Android.bp
index 65f9652..8e142ec 100644
--- a/wifi/supplicant/aidl/vts/functional/Android.bp
+++ b/wifi/supplicant/aidl/vts/functional/Android.bp
@@ -33,11 +33,23 @@
     shared_libs: [
         "libbinder",
         "libbinder_ndk",
+        "libvndksupport",
     ],
     static_libs: [
+        "android.hardware.wifi@1.0",
+        "android.hardware.wifi@1.1",
+        "android.hardware.wifi@1.2",
+        "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
+        "android.hardware.wifi.supplicant@1.0",
+        "android.hardware.wifi.supplicant@1.1",
         "android.hardware.wifi.supplicant-V1-ndk",
         "libwifi-system",
         "libwifi-system-iface",
+        "VtsHalWifiV1_0TargetTestUtil",
+        "VtsHalWifiV1_5TargetTestUtil",
+        "VtsHalWifiSupplicantV1_0TargetTestUtil",
     ],
     test_suites: [
         "general-tests",
@@ -55,11 +67,23 @@
     shared_libs: [
         "libbinder",
         "libbinder_ndk",
+        "libvndksupport",
     ],
     static_libs: [
+        "android.hardware.wifi@1.0",
+        "android.hardware.wifi@1.1",
+        "android.hardware.wifi@1.2",
+        "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
+        "android.hardware.wifi.supplicant@1.0",
+        "android.hardware.wifi.supplicant@1.1",
         "android.hardware.wifi.supplicant-V1-ndk",
         "libwifi-system",
         "libwifi-system-iface",
+        "VtsHalWifiV1_0TargetTestUtil",
+        "VtsHalWifiV1_5TargetTestUtil",
+        "VtsHalWifiSupplicantV1_0TargetTestUtil",
     ],
     test_suites: [
         "general-tests",
@@ -77,11 +101,23 @@
     shared_libs: [
         "libbinder",
         "libbinder_ndk",
+        "libvndksupport",
     ],
     static_libs: [
+        "android.hardware.wifi@1.0",
+        "android.hardware.wifi@1.1",
+        "android.hardware.wifi@1.2",
+        "android.hardware.wifi@1.3",
+        "android.hardware.wifi@1.4",
+        "android.hardware.wifi@1.5",
+        "android.hardware.wifi.supplicant@1.0",
+        "android.hardware.wifi.supplicant@1.1",
         "android.hardware.wifi.supplicant-V1-ndk",
         "libwifi-system",
         "libwifi-system-iface",
+        "VtsHalWifiV1_0TargetTestUtil",
+        "VtsHalWifiV1_5TargetTestUtil",
+        "VtsHalWifiSupplicantV1_0TargetTestUtil",
     ],
     test_suites: [
         "general-tests",
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
index 470a9b0..90ca215 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_p2p_iface_aidl_test.cpp
@@ -169,8 +169,7 @@
    public:
     void SetUp() override {
         initializeService();
-        supplicant_ = ISupplicant::fromBinder(ndk::SpAIBinder(
-            AServiceManager_waitForService(GetParam().c_str())));
+        supplicant_ = getSupplicant(GetParam().c_str());
         ASSERT_NE(supplicant_, nullptr);
         ASSERT_TRUE(supplicant_
                         ->setDebugParams(DebugLevel::EXCESSIVE,
@@ -184,13 +183,13 @@
             GTEST_SKIP() << "Wi-Fi Direct is not supported, skip this test.";
         }
 
-        EXPECT_TRUE(supplicant_->addP2pInterface(getP2pIfaceName(), &p2p_iface_)
+        EXPECT_TRUE(supplicant_->getP2pInterface(getP2pIfaceName(), &p2p_iface_)
                         .isOk());
         ASSERT_NE(p2p_iface_, nullptr);
     }
 
     void TearDown() override {
-        stopSupplicant();
+        stopSupplicantService();
         startWifiFramework();
     }
 
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp
index 2f7a6de..c163864 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_sta_iface_aidl_test.cpp
@@ -203,21 +203,20 @@
    public:
     void SetUp() override {
         initializeService();
-        supplicant_ = ISupplicant::fromBinder(ndk::SpAIBinder(
-            AServiceManager_waitForService(GetParam().c_str())));
+        supplicant_ = getSupplicant(GetParam().c_str());
         ASSERT_NE(supplicant_, nullptr);
         ASSERT_TRUE(supplicant_
                         ->setDebugParams(DebugLevel::EXCESSIVE,
                                          true,  // show timestamps
                                          true)
                         .isOk());
-        EXPECT_TRUE(supplicant_->addStaInterface(getStaIfaceName(), &sta_iface_)
+        EXPECT_TRUE(supplicant_->getStaInterface(getStaIfaceName(), &sta_iface_)
                         .isOk());
         ASSERT_NE(sta_iface_, nullptr);
     }
 
     void TearDown() override {
-        stopSupplicant();
+        stopSupplicantService();
         startWifiFramework();
     }
 
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp b/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp
index c6dd981..b3f70da 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_sta_network_aidl_test.cpp
@@ -105,15 +105,14 @@
    public:
     void SetUp() override {
         initializeService();
-        supplicant_ = ISupplicant::fromBinder(ndk::SpAIBinder(
-            AServiceManager_waitForService(GetParam().c_str())));
+        supplicant_ = getSupplicant(GetParam().c_str());
         ASSERT_NE(supplicant_, nullptr);
         ASSERT_TRUE(supplicant_
                         ->setDebugParams(DebugLevel::EXCESSIVE,
                                          true,  // show timestamps
                                          true)
                         .isOk());
-        EXPECT_TRUE(supplicant_->addStaInterface(getStaIfaceName(), &sta_iface_)
+        EXPECT_TRUE(supplicant_->getStaInterface(getStaIfaceName(), &sta_iface_)
                         .isOk());
         ASSERT_NE(sta_iface_, nullptr);
         EXPECT_TRUE(sta_iface_->addNetwork(&sta_network_).isOk());
@@ -121,7 +120,7 @@
     }
 
     void TearDown() override {
-        stopSupplicant();
+        stopSupplicantService();
         startWifiFramework();
     }
 
diff --git a/wifi/supplicant/aidl/vts/functional/supplicant_test_utils.h b/wifi/supplicant/aidl/vts/functional/supplicant_test_utils.h
index b7e1a80..17e0394 100644
--- a/wifi/supplicant/aidl/vts/functional/supplicant_test_utils.h
+++ b/wifi/supplicant/aidl/vts/functional/supplicant_test_utils.h
@@ -19,8 +19,14 @@
 
 #include <VtsCoreUtil.h>
 #include <android-base/logging.h>
+#include <android/hardware/wifi/1.0/IWifi.h>
+#include <hidl/ServiceManagement.h>
+#include <supplicant_hidl_test_utils.h>
 #include <wifi_system/supplicant_manager.h>
 
+using aidl::android::hardware::wifi::supplicant::IfaceInfo;
+using aidl::android::hardware::wifi::supplicant::ISupplicant;
+using aidl::android::hardware::wifi::supplicant::ISupplicantP2pIface;
 using aidl::android::hardware::wifi::supplicant::ISupplicantStaIface;
 using aidl::android::hardware::wifi::supplicant::KeyMgmtMask;
 using android::wifi_system::SupplicantManager;
@@ -37,6 +43,14 @@
     return std::string(buffer.data());
 }
 
+std::string getWifiInstanceName() {
+    const std::vector<std::string> instances =
+        android::hardware::getAllHalInstanceNames(
+            ::android::hardware::wifi::V1_0::IWifi::descriptor);
+    EXPECT_NE(0, instances.size());
+    return instances.size() != 0 ? instances[0] : "";
+}
+
 bool keyMgmtSupported(std::shared_ptr<ISupplicantStaIface> iface,
                       KeyMgmtMask expected) {
     KeyMgmtMask caps;
@@ -53,60 +67,44 @@
     return keyMgmtSupported(iface, filsMask);
 }
 
-bool waitForSupplicantState(bool is_running) {
+void startSupplicant() {
+    initializeDriverAndFirmware(getWifiInstanceName());
     SupplicantManager supplicant_manager;
-    int count = 50; /* wait at most 5 seconds for completion */
-    while (count-- > 0) {
-        if (supplicant_manager.IsSupplicantRunning() == is_running) {
-            return true;
-        }
-        usleep(100000);
-    }
-    LOG(ERROR) << "Supplicant not " << (is_running ? "running" : "stopped");
-    return false;
+    ASSERT_TRUE(supplicant_manager.StartSupplicant());
+    ASSERT_TRUE(supplicant_manager.IsSupplicantRunning());
 }
 
-bool waitForFrameworkReady() {
-    int waitCount = 15;
-    do {
-        // Check whether package service is ready or not.
-        if (!testing::checkSubstringInCommandOutput(
-                "/system/bin/service check package", ": not found")) {
-            return true;
-        }
-        LOG(INFO) << "Framework is not ready";
-        sleep(1);
-    } while (waitCount-- > 0);
-    return false;
-}
-
-bool waitForSupplicantStart() { return waitForSupplicantState(true); }
-
-bool waitForSupplicantStop() { return waitForSupplicantState(false); }
-
-void stopSupplicant() {
-    SupplicantManager supplicant_manager;
-    ASSERT_TRUE(supplicant_manager.StopSupplicant());
-    ASSERT_FALSE(supplicant_manager.IsSupplicantRunning());
-}
-
-bool startWifiFramework() {
-    std::system("svc wifi enable");
-    std::system("cmd wifi set-scan-always-available enabled");
-    return waitForSupplicantStart();
-}
-
-bool stopWifiFramework() {
-    std::system("svc wifi disable");
-    std::system("cmd wifi set-scan-always-available disabled");
-    return waitForSupplicantStop();
-}
+// Wrapper around the implementation in supplicant_hidl_test_util.
+void stopSupplicantService() { stopSupplicant(getWifiInstanceName()); }
 
 void initializeService() {
     ASSERT_TRUE(stopWifiFramework());
     std::system("/system/bin/start");
     ASSERT_TRUE(waitForFrameworkReady());
-    stopSupplicant();
+    stopSupplicantService();
+    startSupplicant();
+}
+
+void addStaIface(const std::shared_ptr<ISupplicant> supplicant) {
+    ASSERT_TRUE(supplicant.get());
+    std::shared_ptr<ISupplicantStaIface> iface;
+    ASSERT_TRUE(supplicant->addStaInterface(getStaIfaceName(), &iface).isOk());
+}
+
+void addP2pIface(const std::shared_ptr<ISupplicant> supplicant) {
+    ASSERT_TRUE(supplicant.get());
+    std::shared_ptr<ISupplicantP2pIface> iface;
+    ASSERT_TRUE(supplicant->addP2pInterface(getP2pIfaceName(), &iface).isOk());
+}
+
+std::shared_ptr<ISupplicant> getSupplicant(const char* supplicant_name) {
+    std::shared_ptr<ISupplicant> supplicant = ISupplicant::fromBinder(
+        ndk::SpAIBinder(AServiceManager_waitForService(supplicant_name)));
+    addStaIface(supplicant);
+    if (testing::deviceSupportsFeature("android.hardware.wifi.direct")) {
+        addP2pIface(supplicant);
+    }
+    return supplicant;
 }
 
 #endif  // SUPPLICANT_TEST_UTILS_H
\ No newline at end of file