Introduce Audio V6
Generate with ./newHal.sh 5.0
+ some typo fix in the .hal
+ some clang-tidy run
This new HAL is an exact copy of the V5.
It will be modified in following patches while R is developed.
Test: push V6 to device and check audio works fine
Bug: 134940862
Change-Id: Ic25d30175032e76e0d3208fb876451de9ae6b7b4
Signed-off-by: Kevin Rocard <krocard@google.com>
diff --git a/audio/6.0/IPrimaryDevice.hal b/audio/6.0/IPrimaryDevice.hal
new file mode 100644
index 0000000..78cfc65
--- /dev/null
+++ b/audio/6.0/IPrimaryDevice.hal
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2019 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.audio@6.0;
+
+import android.hardware.audio.common@6.0;
+import IDevice;
+
+interface IPrimaryDevice extends IDevice {
+ /**
+ * Sets the audio volume of a voice call.
+ *
+ * @param volume 1.0f means unity, 0.0f is zero.
+ * @return retval operation completion status.
+ */
+ setVoiceVolume(float volume) generates (Result retval);
+
+ /**
+ * This method is used to notify the HAL about audio mode changes.
+ *
+ * @param mode new mode.
+ * @return retval operation completion status.
+ */
+ setMode(AudioMode mode) generates (Result retval);
+
+ /**
+ * Sets the name of the current BT SCO headset. Calling this method
+ * is equivalent to setting legacy "bt_headset_name" parameter.
+ * The BT SCO headset name must only be used for debugging purposes.
+ * Optional method
+ *
+ * @param name the name of the current BT SCO headset (can be empty).
+ * @return retval operation completion status.
+ */
+ setBtScoHeadsetDebugName(string name) generates (Result retval);
+
+ /**
+ * Gets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+ * Calling this method is equivalent to getting AUDIO_PARAMETER_KEY_BT_NREC
+ * on the legacy HAL.
+ *
+ * @return retval operation completion status.
+ * @return enabled whether BT SCO NR + EC are enabled.
+ */
+ getBtScoNrecEnabled() generates (Result retval, bool enabled);
+
+ /**
+ * Sets whether BT SCO Noise Reduction and Echo Cancellation are enabled.
+ * Calling this method is equivalent to setting AUDIO_PARAMETER_KEY_BT_NREC
+ * on the legacy HAL.
+ * Optional method
+ *
+ * @param enabled whether BT SCO NR + EC are enabled.
+ * @return retval operation completion status.
+ */
+ setBtScoNrecEnabled(bool enabled) generates (Result retval);
+
+ /**
+ * Gets whether BT SCO Wideband mode is enabled. Calling this method is
+ * equivalent to getting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+ *
+ * @return retval operation completion status.
+ * @return enabled whether BT Wideband is enabled.
+ */
+ getBtScoWidebandEnabled() generates (Result retval, bool enabled);
+
+ /**
+ * Sets whether BT SCO Wideband mode is enabled. Calling this method is
+ * equivalent to setting AUDIO_PARAMETER_KEY_BT_SCO_WB on the legacy HAL.
+ * Optional method
+ *
+ * @param enabled whether BT Wideband is enabled.
+ * @return retval operation completion status.
+ */
+ setBtScoWidebandEnabled(bool enabled) generates (Result retval);
+
+ /**
+ * Gets whether BT HFP (Hands-Free Profile) is enabled. Calling this method
+ * is equivalent to getting "hfp_enable" parameter value on the legacy HAL.
+ *
+ * @return retval operation completion status.
+ * @return enabled whether BT HFP is enabled.
+ */
+ getBtHfpEnabled() generates (Result retval, bool enabled);
+
+ /**
+ * Sets whether BT HFP (Hands-Free Profile) is enabled. Calling this method
+ * is equivalent to setting "hfp_enable" parameter on the legacy HAL.
+ * Optional method
+ *
+ * @param enabled whether BT HFP is enabled.
+ * @return retval operation completion status.
+ */
+ setBtHfpEnabled(bool enabled) generates (Result retval);
+
+ /**
+ * Sets the sampling rate of BT HFP (Hands-Free Profile). Calling this
+ * method is equivalent to setting "hfp_set_sampling_rate" parameter
+ * on the legacy HAL.
+ * Optional method
+ *
+ * @param sampleRateHz sample rate in Hz.
+ * @return retval operation completion status.
+ */
+ setBtHfpSampleRate(uint32_t sampleRateHz) generates (Result retval);
+
+ /**
+ * Sets the current output volume Hz for BT HFP (Hands-Free Profile).
+ * Calling this method is equivalent to setting "hfp_volume" parameter value
+ * on the legacy HAL (except that legacy HAL implementations expect
+ * an integer value in the range from 0 to 15.)
+ * Optional method
+ *
+ * @param volume 1.0f means unity, 0.0f is zero.
+ * @return retval operation completion status.
+ */
+ setBtHfpVolume(float volume) generates (Result retval);
+
+ enum TtyMode : int32_t {
+ OFF,
+ VCO,
+ HCO,
+ FULL
+ };
+
+ /**
+ * Gets current TTY mode selection. Calling this method is equivalent to
+ * getting AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+ *
+ * @return retval operation completion status.
+ * @return mode TTY mode.
+ */
+ getTtyMode() generates (Result retval, TtyMode mode);
+
+ /**
+ * Sets current TTY mode. Calling this method is equivalent to setting
+ * AUDIO_PARAMETER_KEY_TTY_MODE on the legacy HAL.
+ *
+ * @param mode TTY mode.
+ * @return retval operation completion status.
+ */
+ setTtyMode(TtyMode mode) generates (Result retval);
+
+ /**
+ * Gets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+ * enabled. Calling this method is equivalent to getting
+ * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+ *
+ * @return retval operation completion status.
+ * @return enabled whether HAC mode is enabled.
+ */
+ getHacEnabled() generates (Result retval, bool enabled);
+
+ /**
+ * Sets whether Hearing Aid Compatibility - Telecoil (HAC-T) mode is
+ * enabled. Calling this method is equivalent to setting
+ * AUDIO_PARAMETER_KEY_HAC on the legacy HAL.
+ * Optional method
+ *
+ * @param enabled whether HAC mode is enabled.
+ * @return retval operation completion status.
+ */
+ setHacEnabled(bool enabled) generates (Result retval);
+
+ enum Rotation : int32_t {
+ DEG_0,
+ DEG_90,
+ DEG_180,
+ DEG_270
+ };
+
+ /**
+ * Updates HAL on the current rotation of the device relative to natural
+ * orientation. Calling this method is equivalent to setting legacy
+ * parameter "rotation".
+ *
+ * @param rotation rotation in degrees relative to natural device
+ * orientation.
+ * @return retval operation completion status.
+ */
+ updateRotation(Rotation rotation) generates (Result retval);
+};