Added 1.3 DataProfileInfo
am: e7de00c5f5
Change-Id: Ic77bac6ae6fa599087006b1f6df02befed1f0af1
diff --git a/radio/1.3/Android.bp b/radio/1.3/Android.bp
index 9424a85..6a9b1d0 100644
--- a/radio/1.3/Android.bp
+++ b/radio/1.3/Android.bp
@@ -20,6 +20,7 @@
],
types: [
"AccessNetwork",
+ "DataProfileInfo",
"DataRegStateResult",
"EmergencyNumber",
"EmergencyNumberSource",
diff --git a/radio/1.3/IRadio.hal b/radio/1.3/IRadio.hal
index 2b14488..dde9d71 100644
--- a/radio/1.3/IRadio.hal
+++ b/radio/1.3/IRadio.hal
@@ -16,7 +16,7 @@
package android.hardware.radio@1.3;
-import @1.0::DataProfileInfo;
+import @1.3::DataProfileInfo;
import @1.0::Dial;
import @1.2::DataRequestReason;
import @1.2::IRadio;
@@ -56,13 +56,7 @@
* @param accessNetwork The access network to setup the data call. If the data connection cannot
* be established on the specified access network, the setup request must be failed.
* @param dataProfileInfo Data profile info.
- * @param modemCognitive Indicates that the requested profile has previously been provided via
- * setDataProfile().
* @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
- * @param isRoaming Indicates whether or not the framework has requested this setupDataCall for
- * a roaming network. The 'protocol' parameter in the old RIL API must be filled
- * accordingly based on the roaming condition. Note this is for backward compatibility with
- * the old radio modem. The modem must not use this param for any other reason.
* @param reason The request reason. Must be DataRequestReason.NORMAL or
* DataRequestReason.HANDOVER.
* @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
@@ -82,8 +76,28 @@
* Note this API is same as 1.2 version except using the 1.3 AccessNetwork as the input param.
*/
oneway setupDataCall_1_3(int32_t serial, AccessNetwork accessNetwork,
- DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed,
- bool isRoaming, DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+ DataProfileInfo dataProfileInfo, bool roamingAllowed,
+ DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+
+ /**
+ * Set an apn to initial attach network
+ *
+ * @param serial Serial number of request.
+ * @param dataProfileInfo data profile containing APN settings
+ *
+ * Response callback is IRadioResponse.setInitialAttachApnResponse()
+ */
+ oneway setInitialAttachApn_1_3(int32_t serial, DataProfileInfo dataProfileInfo);
+
+ /**
+ * Send data profiles of the current carrier to the modem.
+ *
+ * @param serial Serial number of request.
+ * @param profiles Array of DataProfile to set.
+ *
+ * Response callback is IRadioResponse.setDataProfileResponse()
+ */
+ oneway setDataProfile_1_3(int32_t serial, vec<DataProfileInfo> profiles);
/**
* Initiate emergency voice call, with zero or more emergency service category(s).
diff --git a/radio/1.3/types.hal b/radio/1.3/types.hal
index 09202a5..a41f4b2 100644
--- a/radio/1.3/types.hal
+++ b/radio/1.3/types.hal
@@ -16,6 +16,11 @@
package android.hardware.radio@1.3;
+import @1.0::ApnAuthType;
+import @1.0::ApnTypes;
+import @1.0::DataProfileId;
+import @1.0::DataProfileInfoType;
+import @1.0::RadioAccessFamily;
import @1.0::RegState;
import @1.2::AccessNetwork;
import @1.2::CellIdentity;
@@ -160,3 +165,71 @@
LteVopsInfo lteVopsInfo; // LTE network capability
} vopsInfo;
};
+
+/**
+ * Overwritten from @1.0::DataProfileInfo in order to deprecate 'mvnoType', 'mvnoMatchData',
+ * 'maxConnsTime', and 'maxConns'. In the future, this must be extended instead of overwritten.
+ * Added 'preferred' and 'persistent' in this version.
+ */
+struct DataProfileInfo {
+ /** id of the data profile */
+ DataProfileId profileId;
+
+ /** The APN name */
+ string apn;
+
+ /**
+ * One of the PDP_type values in TS 27.007 section 10.1.1. For example, "IP", "IPV6", "IPV4V6",
+ * or "PPP".
+ */
+ string protocol;
+
+ /**
+ * one of the PDP_type values in TS 27.007 section 10.1.1 used on roaming network. For example,
+ * "IP", "IPV6", "IPV4V6", or "PPP".
+ */
+ string roamingProtocol;
+
+ /** APN authentication type */
+ ApnAuthType authType;
+
+ /** The username for APN, or empty string */
+ string user;
+
+ /** The password for APN, or empty string */
+ string password;
+
+ /** Data profile technology type */
+ DataProfileInfoType type;
+
+ /**
+ * The required wait time in seconds after a successful UE initiated disconnect of a given PDN
+ * connection before the device can send a new PDN connection request for that given PDN.
+ */
+ int32_t waitTime;
+
+ /** True to enable the profile, false to disable */
+ bool enabled;
+
+ /** Supported APN types bitmap. See ApnTypes for the value of each bit. */
+ bitfield<ApnTypes> supportedApnTypesBitmap;
+
+ /** The bearer bitmap. See RadioAccessFamily for the value of each bit. */
+ bitfield<RadioAccessFamily> bearerBitmap;
+
+ /** Maximum transmission unit (MTU) size in bytes */
+ int32_t mtu;
+
+ /**
+ * True if this data profile was used to bring up the last default (i.e internet) data
+ * connection successfully.
+ */
+ bool preferred;
+
+ /**
+ * If true, modem must persist this data profile and profileId must not be
+ * set to DataProfileId.INVALID. If the same data profile exists, this data profile must
+ * overwrite it.
+ */
+ bool persistent;
+};