diff --git a/services/inputflinger/include/InputReaderBase.h b/services/inputflinger/include/InputReaderBase.h
index efc8b26..40359a4 100644
--- a/services/inputflinger/include/InputReaderBase.h
+++ b/services/inputflinger/include/InputReaderBase.h
@@ -126,7 +126,20 @@
     // The suggested display ID to show the cursor.
     int32_t defaultPointerDisplayId;
 
+    // The mouse pointer speed, as a number from -7 (slowest) to 7 (fastest).
+    //
+    // Currently only used when the enable_new_mouse_pointer_ballistics flag is enabled.
+    int32_t mousePointerSpeed;
+
+    // Whether to apply an acceleration curve to pointer movements from mice.
+    //
+    // Currently only used when the enable_new_mouse_pointer_ballistics flag is enabled.
+    bool mousePointerAccelerationEnabled;
+
     // Velocity control parameters for mouse pointer movements.
+    //
+    // If the enable_new_mouse_pointer_ballistics flag is enabled, these are ignored and the values
+    // of mousePointerSpeed and mousePointerAccelerationEnabled used instead.
     VelocityControlParameters pointerVelocityControlParameters;
 
     // Velocity control parameters for mouse wheel movements.
@@ -229,6 +242,8 @@
 
     InputReaderConfiguration()
           : virtualKeyQuietTime(0),
+            mousePointerSpeed(0),
+            mousePointerAccelerationEnabled(true),
             pointerVelocityControlParameters(1.0f, 500.0f, 3000.0f,
                                              static_cast<float>(
                                                      android::os::IInputConstants::
diff --git a/services/inputflinger/reader/mapper/CursorInputMapper.cpp b/services/inputflinger/reader/mapper/CursorInputMapper.cpp
index 58e35a6..4cebd64 100644
--- a/services/inputflinger/reader/mapper/CursorInputMapper.cpp
+++ b/services/inputflinger/reader/mapper/CursorInputMapper.cpp
@@ -20,9 +20,11 @@
 
 #include "CursorInputMapper.h"
 
-#include <com_android_input_flags.h>
 #include <optional>
 
+#include <com_android_input_flags.h>
+#include <input/AccelerationCurve.h>
+
 #include "CursorButtonAccumulator.h"
 #include "CursorScrollAccumulator.h"
 #include "PointerControllerInterface.h"
@@ -75,7 +77,8 @@
                                      const InputReaderConfiguration& readerConfig)
       : InputMapper(deviceContext, readerConfig),
         mLastEventTime(std::numeric_limits<nsecs_t>::min()),
-        mEnablePointerChoreographer(input_flags::enable_pointer_choreographer()) {}
+        mEnablePointerChoreographer(input_flags::enable_pointer_choreographer()),
+        mEnableNewMousePointerBallistics(input_flags::enable_new_mouse_pointer_ballistics()) {}
 
 CursorInputMapper::~CursorInputMapper() {
     if (mPointerController != nullptr) {
@@ -204,7 +207,8 @@
     mDownTime = 0;
     mLastEventTime = std::numeric_limits<nsecs_t>::min();
 
-    mPointerVelocityControl.reset();
+    mOldPointerVelocityControl.reset();
+    mNewPointerVelocityControl.reset();
     mWheelXVelocityControl.reset();
     mWheelYVelocityControl.reset();
 
@@ -282,7 +286,11 @@
     mWheelYVelocityControl.move(when, nullptr, &vscroll);
     mWheelXVelocityControl.move(when, &hscroll, nullptr);
 
-    mPointerVelocityControl.move(when, &deltaX, &deltaY);
+    if (mEnableNewMousePointerBallistics) {
+        mNewPointerVelocityControl.move(when, &deltaX, &deltaY);
+    } else {
+        mOldPointerVelocityControl.move(when, &deltaX, &deltaY);
+    }
 
     float xCursorPosition = AMOTION_EVENT_INVALID_CURSOR_POSITION;
     float yCursorPosition = AMOTION_EVENT_INVALID_CURSOR_POSITION;
@@ -492,11 +500,22 @@
 void CursorInputMapper::configureOnChangePointerSpeed(const InputReaderConfiguration& config) {
     if (mParameters.mode == Parameters::Mode::POINTER_RELATIVE) {
         // Disable any acceleration or scaling for the pointer when Pointer Capture is enabled.
-        mPointerVelocityControl.setParameters(FLAT_VELOCITY_CONTROL_PARAMS);
+        if (mEnableNewMousePointerBallistics) {
+            mNewPointerVelocityControl.setAccelerationEnabled(false);
+        } else {
+            mOldPointerVelocityControl.setParameters(FLAT_VELOCITY_CONTROL_PARAMS);
+        }
         mWheelXVelocityControl.setParameters(FLAT_VELOCITY_CONTROL_PARAMS);
         mWheelYVelocityControl.setParameters(FLAT_VELOCITY_CONTROL_PARAMS);
     } else {
-        mPointerVelocityControl.setParameters(config.pointerVelocityControlParameters);
+        if (mEnableNewMousePointerBallistics) {
+            mNewPointerVelocityControl.setAccelerationEnabled(
+                    config.mousePointerAccelerationEnabled);
+            mNewPointerVelocityControl.setCurve(
+                    createAccelerationCurveForPointerSensitivity(config.mousePointerSpeed));
+        } else {
+            mOldPointerVelocityControl.setParameters(config.pointerVelocityControlParameters);
+        }
         mWheelXVelocityControl.setParameters(config.wheelVelocityControlParameters);
         mWheelYVelocityControl.setParameters(config.wheelVelocityControlParameters);
     }
diff --git a/services/inputflinger/reader/mapper/CursorInputMapper.h b/services/inputflinger/reader/mapper/CursorInputMapper.h
index 308adaa..1ddf6f2 100644
--- a/services/inputflinger/reader/mapper/CursorInputMapper.h
+++ b/services/inputflinger/reader/mapper/CursorInputMapper.h
@@ -26,7 +26,6 @@
 
 namespace android {
 
-class VelocityControl;
 class PointerControllerInterface;
 
 class CursorButtonAccumulator;
@@ -111,9 +110,10 @@
 
     // Velocity controls for mouse pointer and wheel movements.
     // The controls for X and Y wheel movements are separate to keep them decoupled.
-    VelocityControl mPointerVelocityControl;
-    VelocityControl mWheelXVelocityControl;
-    VelocityControl mWheelYVelocityControl;
+    SimpleVelocityControl mOldPointerVelocityControl;
+    CurvedVelocityControl mNewPointerVelocityControl;
+    SimpleVelocityControl mWheelXVelocityControl;
+    SimpleVelocityControl mWheelYVelocityControl;
 
     // The display that events generated by this mapper should target. This can be set to
     // ADISPLAY_ID_NONE to target the focused display. If there is no display target (i.e.
@@ -129,6 +129,7 @@
     nsecs_t mLastEventTime;
 
     const bool mEnablePointerChoreographer;
+    const bool mEnableNewMousePointerBallistics;
 
     explicit CursorInputMapper(InputDeviceContext& deviceContext,
                                const InputReaderConfiguration& readerConfig);
diff --git a/services/inputflinger/reader/mapper/TouchInputMapper.h b/services/inputflinger/reader/mapper/TouchInputMapper.h
index bd9371d..4b39e40 100644
--- a/services/inputflinger/reader/mapper/TouchInputMapper.h
+++ b/services/inputflinger/reader/mapper/TouchInputMapper.h
@@ -708,9 +708,9 @@
     } mPointerSimple;
 
     // The pointer and scroll velocity controls.
-    VelocityControl mPointerVelocityControl;
-    VelocityControl mWheelXVelocityControl;
-    VelocityControl mWheelYVelocityControl;
+    SimpleVelocityControl mPointerVelocityControl;
+    SimpleVelocityControl mWheelXVelocityControl;
+    SimpleVelocityControl mWheelYVelocityControl;
 
     std::optional<DisplayViewport> findViewport();
 
diff --git a/services/inputflinger/reader/mapper/TouchpadInputMapper.cpp b/services/inputflinger/reader/mapper/TouchpadInputMapper.cpp
index 6f697db..bdc1640 100644
--- a/services/inputflinger/reader/mapper/TouchpadInputMapper.cpp
+++ b/services/inputflinger/reader/mapper/TouchpadInputMapper.cpp
@@ -29,6 +29,7 @@
 #include <android/input.h>
 #include <com_android_input_flags.h>
 #include <ftl/enum.h>
+#include <input/AccelerationCurve.h>
 #include <input/PrintTools.h>
 #include <linux/input-event-codes.h>
 #include <log/log_main.h>
@@ -55,27 +56,10 @@
         __android_log_is_loggable(ANDROID_LOG_DEBUG, "TouchpadInputMapperGestures",
                                   ANDROID_LOG_INFO);
 
-// Describes a segment of the acceleration curve.
-struct CurveSegment {
-    // The maximum pointer speed which this segment should apply. The last segment in a curve should
-    // always set this to infinity.
-    double maxPointerSpeedMmPerS;
-    double slope;
-    double intercept;
-};
-
-const std::vector<CurveSegment> segments = {
-        {32.002, 3.19, 0},
-        {52.83, 4.79, -51.254},
-        {119.124, 7.28, -182.737},
-        {std::numeric_limits<double>::infinity(), 15.04, -1107.556},
-};
-
-const std::vector<double> sensitivityFactors = {1,  2,  4,  6,  7,  8,  9, 10,
-                                                11, 12, 13, 14, 16, 18, 20};
-
 std::vector<double> createAccelerationCurveForSensitivity(int32_t sensitivity,
                                                           size_t propertySize) {
+    std::vector<AccelerationCurveSegment> segments =
+            createAccelerationCurveForPointerSensitivity(sensitivity);
     LOG_ALWAYS_FATAL_IF(propertySize < 4 * segments.size());
     std::vector<double> output(propertySize, 0);
 
@@ -85,31 +69,23 @@
     //
     // (a, b, and c are also called sqr_, mul_, and int_ in the Gestures library code.)
     //
-    // We are trying to implement the following function, where slope and intercept are the
-    // parameters specified in the `segments` array above:
-    //     gain(input_speed_mm) =
-    //             0.64 * (sensitivityFactor / 10) * (slope + intercept / input_speed_mm)
+    // createAccelerationCurveForPointerSensitivity gives us parameters for a function of the form:
+    //     gain(input_speed_mm) = baseGain + reciprocal / input_speed_mm
     // Where "gain" is a multiplier applied to the input speed to produce the output speed:
     //     output_speed(input_speed_mm) = input_speed_mm * gain(input_speed_mm)
     //
     // To put our function in the library's form, we substitute it into the function above:
-    //     output_speed(input_speed_mm) =
-    //             input_speed_mm * (0.64 * (sensitivityFactor / 10) *
-    //             (slope + 25.4 * intercept / input_speed_mm))
-    // then expand the brackets so that input_speed_mm cancels out for the intercept term:
-    //     gain(input_speed_mm) =
-    //             0.64 * (sensitivityFactor / 10) * slope * input_speed_mm +
-    //             0.64 * (sensitivityFactor / 10) * intercept
+    //     output_speed(input_speed_mm) = input_speed_mm * (baseGain + reciprocal / input_speed_mm)
+    // then expand the brackets so that input_speed_mm cancels out for the reciprocal term:
+    //     gain(input_speed_mm) = baseGain * input_speed_mm + reciprocal
     //
     // This gives us the following parameters for the Gestures library function form:
     //     a = 0
-    //     b = 0.64 * (sensitivityFactor / 10) * slope
-    //     c = 0.64 * (sensitivityFactor / 10) * intercept
-
-    double commonFactor = 0.64 * sensitivityFactors[sensitivity + 7] / 10;
+    //     b = baseGain
+    //     c = reciprocal
 
     size_t i = 0;
-    for (CurveSegment seg : segments) {
+    for (AccelerationCurveSegment seg : segments) {
         // The library's curve format consists of four doubles per segment:
         // * maximum pointer speed for the segment (mm/s)
         // * multiplier for the x² term (a.k.a. "a" or "sqr")
@@ -118,8 +94,8 @@
         // (see struct CurveSegment in the library's AccelFilterInterpreter)
         output[i + 0] = seg.maxPointerSpeedMmPerS;
         output[i + 1] = 0;
-        output[i + 2] = commonFactor * seg.slope;
-        output[i + 3] = commonFactor * seg.intercept;
+        output[i + 2] = seg.baseGain;
+        output[i + 3] = seg.reciprocal;
         i += 4;
     }
 
diff --git a/services/inputflinger/tests/CursorInputMapper_test.cpp b/services/inputflinger/tests/CursorInputMapper_test.cpp
index 66c3256..e104543 100644
--- a/services/inputflinger/tests/CursorInputMapper_test.cpp
+++ b/services/inputflinger/tests/CursorInputMapper_test.cpp
@@ -193,6 +193,7 @@
 protected:
     void SetUp() override {
         input_flags::enable_pointer_choreographer(false);
+        input_flags::enable_new_mouse_pointer_ballistics(false);
         CursorInputMapperUnitTestBase::SetUp();
     }
 };
@@ -954,6 +955,7 @@
 protected:
     void SetUp() override {
         input_flags::enable_pointer_choreographer(true);
+        input_flags::enable_new_mouse_pointer_ballistics(false);
         CursorInputMapperUnitTestBase::SetUp();
     }
 };
@@ -1280,6 +1282,48 @@
                               WithCoords(0.0f, 0.0f)))));
 }
 
+// TODO(b/320433834): De-duplicate the test cases once the flag is removed.
+class CursorInputMapperUnitTestWithNewBallistics : public CursorInputMapperUnitTestBase {
+protected:
+    void SetUp() override {
+        input_flags::enable_pointer_choreographer(true);
+        input_flags::enable_new_mouse_pointer_ballistics(true);
+        CursorInputMapperUnitTestBase::SetUp();
+    }
+};
+
+TEST_F(CursorInputMapperUnitTestWithNewBallistics, PointerCaptureDisablesVelocityProcessing) {
+    mPropertyMap.addProperty("cursor.mode", "pointer");
+    createMapper();
+
+    NotifyMotionArgs motionArgs;
+    std::list<NotifyArgs> args;
+
+    // Move and verify scale is applied.
+    args += process(ARBITRARY_TIME, EV_REL, REL_X, 10);
+    args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20);
+    args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0);
+    motionArgs = std::get<NotifyMotionArgs>(args.front());
+    const float relX = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X);
+    const float relY = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y);
+    ASSERT_GT(relX, 10);
+    ASSERT_GT(relY, 20);
+    args.clear();
+
+    // Enable Pointer Capture
+    setPointerCapture(true);
+
+    // Move and verify scale is not applied.
+    args += process(ARBITRARY_TIME, EV_REL, REL_X, 10);
+    args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20);
+    args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0);
+    motionArgs = std::get<NotifyMotionArgs>(args.front());
+    const float relX2 = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X);
+    const float relY2 = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y);
+    ASSERT_EQ(10, relX2);
+    ASSERT_EQ(20, relY2);
+}
+
 namespace {
 
 // Minimum timestamp separation between subsequent input events from a Bluetooth device.