diff --git a/services/surfaceflinger/Scheduler/FrameRateCompatibility.h b/services/surfaceflinger/Scheduler/FrameRateCompatibility.h
index 405c982..d8c408f 100644
--- a/services/surfaceflinger/Scheduler/FrameRateCompatibility.h
+++ b/services/surfaceflinger/Scheduler/FrameRateCompatibility.h
@@ -29,6 +29,8 @@
     ExactOrMultiple, // Layer needs the exact frame rate (or a multiple of it) to present the
                      // content properly. Any other value will result in a pull down.
 
+    Gte, // Layer needs greater than or equal to the frame rate.
+
     NoVote, // Layer doesn't have any requirements for the refresh rate and
             // should not be considered when the display refresh rate is determined.
 
diff --git a/services/surfaceflinger/Scheduler/LayerHistory.cpp b/services/surfaceflinger/Scheduler/LayerHistory.cpp
index d309adc..9c00302 100644
--- a/services/surfaceflinger/Scheduler/LayerHistory.cpp
+++ b/services/surfaceflinger/Scheduler/LayerHistory.cpp
@@ -278,6 +278,8 @@
                         return LayerVoteType::NoVote;
                     case Layer::FrameRateCompatibility::Exact:
                         return LayerVoteType::ExplicitExact;
+                    case Layer::FrameRateCompatibility::Gte:
+                        return LayerVoteType::ExplicitGte;
                 }
             }();
 
diff --git a/services/surfaceflinger/Scheduler/LayerInfo.cpp b/services/surfaceflinger/Scheduler/LayerInfo.cpp
index 71ad451..d3ff236 100644
--- a/services/surfaceflinger/Scheduler/LayerInfo.cpp
+++ b/services/surfaceflinger/Scheduler/LayerInfo.cpp
@@ -485,6 +485,8 @@
             return FrameRateCompatibility::Exact;
         case ANATIVEWINDOW_FRAME_RATE_MIN:
             return FrameRateCompatibility::Min;
+        case ANATIVEWINDOW_FRAME_RATE_GTE:
+            return FrameRateCompatibility::Gte;
         case ANATIVEWINDOW_FRAME_RATE_NO_VOTE:
             return FrameRateCompatibility::NoVote;
         default:
diff --git a/services/surfaceflinger/Scheduler/RefreshRateSelector.cpp b/services/surfaceflinger/Scheduler/RefreshRateSelector.cpp
index 6a7063e..e06221a 100644
--- a/services/surfaceflinger/Scheduler/RefreshRateSelector.cpp
+++ b/services/surfaceflinger/Scheduler/RefreshRateSelector.cpp
@@ -332,6 +332,15 @@
         return calculateNonExactMatchingDefaultLayerScoreLocked(displayPeriod, layerPeriod);
     }
 
+    if (layer.vote == LayerVoteType::ExplicitGte) {
+        using fps_approx_ops::operator>=;
+        if (refreshRate >= layer.desiredRefreshRate) {
+            return 1.0f;
+        } else {
+            return calculateDistanceScoreLocked(layer.desiredRefreshRate, refreshRate);
+        }
+    }
+
     if (layer.vote == LayerVoteType::ExplicitExactOrMultiple ||
         layer.vote == LayerVoteType::Heuristic) {
         using fps_approx_ops::operator<;
@@ -390,13 +399,20 @@
     return 0;
 }
 
-float RefreshRateSelector::calculateDistanceScoreFromMax(Fps refreshRate) const {
-    const auto& maxFps = mAppRequestFrameRates.back().fps;
-    const float ratio = refreshRate.getValue() / maxFps.getValue();
-    // Use ratio^2 to get a lower score the more we get further from peak
+float RefreshRateSelector::calculateDistanceScoreLocked(Fps referenceRate, Fps refreshRate) const {
+    using fps_approx_ops::operator>=;
+    const float ratio = referenceRate >= refreshRate
+            ? refreshRate.getValue() / referenceRate.getValue()
+            : referenceRate.getValue() / refreshRate.getValue();
+    // Use ratio^2 to get a lower score the more we get further from the reference rate.
     return ratio * ratio;
 }
 
+float RefreshRateSelector::calculateDistanceScoreFromMaxLocked(Fps refreshRate) const {
+    const auto& maxFps = mAppRequestFrameRates.back().fps;
+    return calculateDistanceScoreLocked(maxFps, refreshRate);
+}
+
 float RefreshRateSelector::calculateLayerScoreLocked(const LayerRequirement& layer, Fps refreshRate,
                                                      bool isSeamlessSwitch) const {
     // Slightly prefer seamless switches.
@@ -421,7 +437,7 @@
 
     // If the layer wants Max, give higher score to the higher refresh rate
     if (layer.vote == LayerVoteType::Max) {
-        return calculateDistanceScoreFromMax(refreshRate);
+        return calculateDistanceScoreFromMaxLocked(refreshRate);
     }
 
     if (layer.vote == LayerVoteType::ExplicitExact) {
@@ -489,6 +505,7 @@
     int explicitDefaultVoteLayers = 0;
     int explicitExactOrMultipleVoteLayers = 0;
     int explicitExact = 0;
+    int explicitGteLayers = 0;
     int explicitCategoryVoteLayers = 0;
     int seamedFocusedLayers = 0;
     int categorySmoothSwitchOnlyLayers = 0;
@@ -513,6 +530,9 @@
             case LayerVoteType::ExplicitExact:
                 explicitExact++;
                 break;
+            case LayerVoteType::ExplicitGte:
+                explicitGteLayers++;
+                break;
             case LayerVoteType::ExplicitCategory:
                 explicitCategoryVoteLayers++;
                 if (layer.frameRateCategory == FrameRateCategory::NoPreference) {
@@ -535,7 +555,7 @@
     }
 
     const bool hasExplicitVoteLayers = explicitDefaultVoteLayers > 0 ||
-            explicitExactOrMultipleVoteLayers > 0 || explicitExact > 0 ||
+            explicitExactOrMultipleVoteLayers > 0 || explicitExact > 0 || explicitGteLayers > 0 ||
             explicitCategoryVoteLayers > 0;
 
     const Policy* policy = getCurrentPolicyLocked();
@@ -688,6 +708,7 @@
                     case LayerVoteType::Max:
                     case LayerVoteType::ExplicitDefault:
                     case LayerVoteType::ExplicitExact:
+                    case LayerVoteType::ExplicitGte:
                     case LayerVoteType::ExplicitCategory:
                         return false;
                 }
@@ -1081,7 +1102,7 @@
             return;
         }
 
-        float score = calculateDistanceScoreFromMax(frameRateMode.fps);
+        float score = calculateDistanceScoreFromMaxLocked(frameRateMode.fps);
 
         if (ascending) {
             score = 1.0f / score;
diff --git a/services/surfaceflinger/Scheduler/RefreshRateSelector.h b/services/surfaceflinger/Scheduler/RefreshRateSelector.h
index 40e9a83..9f6a29c 100644
--- a/services/surfaceflinger/Scheduler/RefreshRateSelector.h
+++ b/services/surfaceflinger/Scheduler/RefreshRateSelector.h
@@ -149,6 +149,7 @@
                                  // ExactOrMultiple compatibility
         ExplicitExact,           // Specific refresh rate that was provided by the app with
                                  // Exact compatibility
+        ExplicitGte,             // Greater than or equal to frame rate provided by the app
         ExplicitCategory,        // Specific frame rate category was provided by the app
 
         ftl_last = ExplicitCategory
@@ -460,7 +461,11 @@
     bool isPolicyValidLocked(const Policy& policy) const REQUIRES(mLock);
 
     // Returns the refresh rate score as a ratio to max refresh rate, which has a score of 1.
-    float calculateDistanceScoreFromMax(Fps refreshRate) const REQUIRES(mLock);
+    float calculateDistanceScoreFromMaxLocked(Fps refreshRate) const REQUIRES(mLock);
+
+    // Returns the refresh rate score based on its distance from the reference rate.
+    float calculateDistanceScoreLocked(Fps referenceRate, Fps refreshRate) const REQUIRES(mLock);
+
     // calculates a score for a layer. Used to determine the display refresh rate
     // and the frame rate override for certains applications.
     float calculateLayerScoreLocked(const LayerRequirement&, Fps refreshRate,
diff --git a/services/surfaceflinger/tests/unittests/RefreshRateSelectorTest.cpp b/services/surfaceflinger/tests/unittests/RefreshRateSelectorTest.cpp
index a9567b2..0cacf81 100644
--- a/services/surfaceflinger/tests/unittests/RefreshRateSelectorTest.cpp
+++ b/services/surfaceflinger/tests/unittests/RefreshRateSelectorTest.cpp
@@ -1150,6 +1150,75 @@
     EXPECT_EQ(kMode90, selector.getBestFrameRateMode(layers).modePtr);
 }
 
+TEST_P(RefreshRateSelectorTest, getBestFrameRateMode_ExplicitGte) {
+    auto selector = createSelector(makeModes(kMode30, kMode60, kMode90, kMode120), kModeId120);
+
+    std::vector<LayerRequirement> layers = {{.weight = 1.f}, {.weight = 1.f}};
+    auto& lr1 = layers[0];
+    auto& lr2 = layers[1];
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 60_Hz;
+    lr1.name = "60Hz ExplicitGte";
+    lr2.vote = LayerVoteType::NoVote;
+    lr2.name = "NoVote";
+    EXPECT_EQ(kMode60, selector.getBestFrameRateMode(layers).modePtr);
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 25_Hz;
+    lr1.name = "25Hz ExplicitGte";
+    lr2.vote = LayerVoteType::NoVote;
+    lr2.name = "NoVote";
+    EXPECT_EQ(kMode30, selector.getBestFrameRateMode(layers).modePtr);
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 91_Hz;
+    lr1.name = "91Hz ExplicitGte";
+    lr2.vote = LayerVoteType::NoVote;
+    lr2.name = "NoVote";
+    EXPECT_EQ(kMode120, selector.getBestFrameRateMode(layers).modePtr);
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 60_Hz;
+    lr1.name = "60Hz ExplicitGte";
+    lr2.vote = LayerVoteType::ExplicitDefault;
+    lr2.desiredRefreshRate = 30_Hz;
+    lr2.name = "30Hz ExplicitDefault";
+    EXPECT_EQ(kMode60, selector.getBestFrameRateMode(layers).modePtr);
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 60_Hz;
+    lr1.name = "60Hz ExplicitGte";
+    lr2.vote = LayerVoteType::ExplicitExactOrMultiple;
+    lr2.desiredRefreshRate = 30_Hz;
+    lr2.name = "30Hz ExplicitExactOrMultiple";
+    EXPECT_EQ(kMode60, selector.getBestFrameRateMode(layers).modePtr);
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 60_Hz;
+    lr1.name = "60Hz ExplicitGte";
+    lr2.vote = LayerVoteType::ExplicitExactOrMultiple;
+    lr2.desiredRefreshRate = 60_Hz;
+    lr2.name = "60Hz ExplicitExactOrMultiple";
+    EXPECT_EQ(kMode60, selector.getBestFrameRateMode(layers).modePtr);
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 60_Hz;
+    lr1.name = "60Hz ExplicitGte";
+    lr2.vote = LayerVoteType::ExplicitExactOrMultiple;
+    lr2.desiredRefreshRate = 90_Hz;
+    lr2.name = "90Hz ExplicitExactOrMultiple";
+    EXPECT_EQ(kMode90, selector.getBestFrameRateMode(layers).modePtr);
+
+    lr1.vote = LayerVoteType::ExplicitGte;
+    lr1.desiredRefreshRate = 60_Hz;
+    lr1.name = "60Hz ExplicitGte";
+    lr2.vote = LayerVoteType::ExplicitExactOrMultiple;
+    lr2.desiredRefreshRate = 120_Hz;
+    lr2.name = "120Hz ExplicitExactOrMultiple";
+    EXPECT_EQ(kMode120, selector.getBestFrameRateMode(layers).modePtr);
+}
+
 TEST_P(RefreshRateSelectorTest, getMaxRefreshRatesByPolicy) {
     // The kModes_30_60_90 contains two kMode72_G1, kMode120_G1 which are from the
     // different group.