Merge "Remove libbinder usage from media.swcodec apex"
diff --git a/cmds/dumpstate/dumpstate.cpp b/cmds/dumpstate/dumpstate.cpp
index 312db67..311ddc4 100644
--- a/cmds/dumpstate/dumpstate.cpp
+++ b/cmds/dumpstate/dumpstate.cpp
@@ -135,6 +135,11 @@
static char cmdline_buf[16384] = "(unknown)";
static const char *dump_traces_path = nullptr;
static const uint64_t USER_CONSENT_TIMEOUT_MS = 30 * 1000;
+// Because telephony reports are significantly faster to collect (< 10 seconds vs. > 2 minutes),
+// it's often the case that they time out far too quickly for consent with such a hefty dialog for
+// the user to read. For telephony reports only, we increase the default timeout to 2 minutes to
+// roughly match full reports' durations.
+static const uint64_t TELEPHONY_REPORT_USER_CONSENT_TIMEOUT_MS = 2 * 60 * 1000;
// TODO: variables and functions below should be part of dumpstate object
@@ -879,6 +884,14 @@
CommandOptions::WithTimeoutInMs(timeout_ms).Build());
}
+static void DoRadioLogcat() {
+ unsigned long timeout_ms = logcat_timeout({"radio"});
+ RunCommand(
+ "RADIO LOG",
+ {"logcat", "-b", "radio", "-v", "threadtime", "-v", "printable", "-v", "uid", "-d", "*:v"},
+ CommandOptions::WithTimeoutInMs(timeout_ms).Build(), true /* verbose_duration */);
+}
+
static void DoLogcat() {
unsigned long timeout_ms;
// DumpFile("EVENT LOG TAGS", "/etc/event-log-tags");
@@ -897,11 +910,7 @@
"STATS LOG",
{"logcat", "-b", "stats", "-v", "threadtime", "-v", "printable", "-v", "uid", "-d", "*:v"},
CommandOptions::WithTimeoutInMs(timeout_ms).Build(), true /* verbose_duration */);
- timeout_ms = logcat_timeout({"radio"});
- RunCommand(
- "RADIO LOG",
- {"logcat", "-b", "radio", "-v", "threadtime", "-v", "printable", "-v", "uid", "-d", "*:v"},
- CommandOptions::WithTimeoutInMs(timeout_ms).Build(), true /* verbose_duration */);
+ DoRadioLogcat();
RunCommand("LOG STATISTICS", {"logcat", "-b", "all", "-S"});
@@ -1611,8 +1620,10 @@
return status;
}
-// This method collects common dumpsys for telephony and wifi
-static void DumpstateRadioCommon() {
+// This method collects common dumpsys for telephony and wifi. Typically, wifi
+// reports are fine to include all information, but telephony reports on user
+// builds need to strip some content (see DumpstateTelephonyOnly).
+static void DumpstateRadioCommon(bool include_sensitive_info = true) {
DumpIpTablesAsRoot();
ds.AddDir(LOGPERSIST_DATA_DIR, false);
@@ -1621,27 +1632,51 @@
return;
}
- do_dmesg();
- DoLogcat();
+ // We need to be picky about some stuff for telephony reports on user builds.
+ if (!include_sensitive_info) {
+ // Only dump the radio log buffer (other buffers and dumps contain too much unrelated info).
+ DoRadioLogcat();
+ } else {
+ // Contains various system properties and process startup info.
+ do_dmesg();
+ // Logs other than the radio buffer may contain package/component names and potential PII.
+ DoLogcat();
+ // Too broad for connectivity problems.
+ DoKmsg();
+ // Contains unrelated hardware info (camera, NFC, biometrics, ...).
+ DumpHals();
+ }
+
DumpPacketStats();
- DoKmsg();
DumpIpAddrAndRules();
dump_route_tables();
- DumpHals();
-
RunDumpsys("NETWORK DIAGNOSTICS", {"connectivity", "--diag"},
CommandOptions::WithTimeout(10).Build());
}
-// This method collects dumpsys for telephony debugging only
+// We use "telephony" here for legacy reasons, though this now really means "connectivity" (cellular
+// + wifi + networking). This method collects dumpsys for connectivity debugging only. General rules
+// for what can be included on user builds: all reported information MUST directly relate to
+// connectivity debugging or customer support and MUST NOT contain unrelated personally identifiable
+// information. This information MUST NOT identify user-installed packages (UIDs are OK, package
+// names are not), and MUST NOT contain logs of user application traffic.
+// TODO(b/148168577) rename this and other related fields/methods to "connectivity" instead.
static void DumpstateTelephonyOnly() {
DurationReporter duration_reporter("DUMPSTATE");
const CommandOptions DUMPSYS_COMPONENTS_OPTIONS = CommandOptions::WithTimeout(60).Build();
- DumpstateRadioCommon();
+ const bool include_sensitive_info = !PropertiesHelper::IsUserBuild();
- RunCommand("SYSTEM PROPERTIES", {"getprop"});
+ DumpstateRadioCommon(include_sensitive_info);
+
+ if (include_sensitive_info) {
+ // Contains too much unrelated PII, and given the unstructured nature of sysprops, we can't
+ // really cherrypick all of the connectivity-related ones. Apps generally have no business
+ // reading these anyway, and there should be APIs to supply the info in a more app-friendly
+ // way.
+ RunCommand("SYSTEM PROPERTIES", {"getprop"});
+ }
printf("========================================================\n");
printf("== Android Framework Services\n");
@@ -1649,15 +1684,28 @@
RunDumpsys("DUMPSYS", {"connectivity"}, CommandOptions::WithTimeout(90).Build(),
SEC_TO_MSEC(10));
- RunDumpsys("DUMPSYS", {"connmetrics"}, CommandOptions::WithTimeout(90).Build(),
- SEC_TO_MSEC(10));
- RunDumpsys("DUMPSYS", {"netd"}, CommandOptions::WithTimeout(90).Build(), SEC_TO_MSEC(10));
+ // TODO(b/146521742) build out an argument to include bound services here for user builds
RunDumpsys("DUMPSYS", {"carrier_config"}, CommandOptions::WithTimeout(90).Build(),
SEC_TO_MSEC(10));
RunDumpsys("DUMPSYS", {"wifi"}, CommandOptions::WithTimeout(90).Build(),
SEC_TO_MSEC(10));
- RunDumpsys("BATTERYSTATS", {"batterystats"}, CommandOptions::WithTimeout(90).Build(),
+ RunDumpsys("DUMPSYS", {"netpolicy"}, CommandOptions::WithTimeout(90).Build(), SEC_TO_MSEC(10));
+ RunDumpsys("DUMPSYS", {"network_management"}, CommandOptions::WithTimeout(90).Build(),
SEC_TO_MSEC(10));
+ if (include_sensitive_info) {
+ // Contains raw IP addresses, omit from reports on user builds.
+ RunDumpsys("DUMPSYS", {"netd"}, CommandOptions::WithTimeout(90).Build(), SEC_TO_MSEC(10));
+ // Contains raw destination IP/MAC addresses, omit from reports on user builds.
+ RunDumpsys("DUMPSYS", {"connmetrics"}, CommandOptions::WithTimeout(90).Build(),
+ SEC_TO_MSEC(10));
+ // Contains package/component names, omit from reports on user builds.
+ RunDumpsys("BATTERYSTATS", {"batterystats"}, CommandOptions::WithTimeout(90).Build(),
+ SEC_TO_MSEC(10));
+ // Contains package names, but should be relatively simple to remove them (also contains
+ // UIDs already), omit from reports on user builds.
+ RunDumpsys("BATTERYSTATS", {"deviceidle"}, CommandOptions::WithTimeout(90).Build(),
+ SEC_TO_MSEC(10));
+ }
printf("========================================================\n");
printf("== Running Application Services\n");
@@ -1665,18 +1713,24 @@
RunDumpsys("TELEPHONY SERVICES", {"activity", "service", "TelephonyDebugService"});
- printf("========================================================\n");
- printf("== Running Application Services (non-platform)\n");
- printf("========================================================\n");
+ if (include_sensitive_info) {
+ printf("========================================================\n");
+ printf("== Running Application Services (non-platform)\n");
+ printf("========================================================\n");
- RunDumpsys("APP SERVICES NON-PLATFORM", {"activity", "service", "all-non-platform"},
- DUMPSYS_COMPONENTS_OPTIONS);
+ // Contains package/component names and potential PII, omit from reports on user builds.
+ // To get dumps of the active CarrierService(s) on user builds, we supply an argument to the
+ // carrier_config dumpsys instead.
+ RunDumpsys("APP SERVICES NON-PLATFORM", {"activity", "service", "all-non-platform"},
+ DUMPSYS_COMPONENTS_OPTIONS);
- printf("========================================================\n");
- printf("== Checkins\n");
- printf("========================================================\n");
+ printf("========================================================\n");
+ printf("== Checkins\n");
+ printf("========================================================\n");
- RunDumpsys("CHECKIN BATTERYSTATS", {"batterystats", "-c"});
+ // Contains package/component names, omit from reports on user builds.
+ RunDumpsys("CHECKIN BATTERYSTATS", {"batterystats", "-c"});
+ }
printf("========================================================\n");
printf("== dumpstate: done (id %d)\n", ds.id_);
@@ -2157,6 +2211,7 @@
break;
case Dumpstate::BugreportMode::BUGREPORT_TELEPHONY:
options->telephony_only = true;
+ options->do_progress_updates = true;
options->do_fb = false;
break;
case Dumpstate::BugreportMode::BUGREPORT_WIFI:
@@ -2641,8 +2696,13 @@
if (consent_result == UserConsentResult::UNAVAILABLE) {
// User has not responded yet.
uint64_t elapsed_ms = consent_callback_->getElapsedTimeMs();
- if (elapsed_ms < USER_CONSENT_TIMEOUT_MS) {
- uint delay_seconds = (USER_CONSENT_TIMEOUT_MS - elapsed_ms) / 1000;
+ // Telephony is a fast report type, particularly on user builds where information may be
+ // more aggressively limited. To give the user time to read the consent dialog, increase the
+ // timeout.
+ uint64_t timeout_ms = options_->telephony_only ? TELEPHONY_REPORT_USER_CONSENT_TIMEOUT_MS
+ : USER_CONSENT_TIMEOUT_MS;
+ if (elapsed_ms < timeout_ms) {
+ uint delay_seconds = (timeout_ms - elapsed_ms) / 1000;
MYLOGD("Did not receive user consent yet; going to wait for %d seconds", delay_seconds);
sleep(delay_seconds);
}
diff --git a/cmds/dumpstate/tests/dumpstate_test.cpp b/cmds/dumpstate/tests/dumpstate_test.cpp
index 1ae073c..718f459 100644
--- a/cmds/dumpstate/tests/dumpstate_test.cpp
+++ b/cmds/dumpstate/tests/dumpstate_test.cpp
@@ -295,12 +295,12 @@
EXPECT_FALSE(options_.do_fb);
EXPECT_TRUE(options_.do_zip_file);
EXPECT_TRUE(options_.telephony_only);
+ EXPECT_TRUE(options_.do_progress_updates);
// Other options retain default values
EXPECT_TRUE(options_.do_vibrate);
EXPECT_FALSE(options_.use_control_socket);
EXPECT_FALSE(options_.show_header_only);
- EXPECT_FALSE(options_.do_progress_updates);
EXPECT_FALSE(options_.is_remote_mode);
EXPECT_FALSE(options_.use_socket);
}
diff --git a/cmds/installd/dexopt.cpp b/cmds/installd/dexopt.cpp
index f95e445..70bbc33 100644
--- a/cmds/installd/dexopt.cpp
+++ b/cmds/installd/dexopt.cpp
@@ -299,9 +299,10 @@
// Namespace for Android Runtime flags applied during boot time.
static const char* RUNTIME_NATIVE_BOOT_NAMESPACE = "runtime_native_boot";
// Feature flag name for running the JIT in Zygote experiment, b/119800099.
-static const char* ENABLE_APEX_IMAGE = "enable_apex_image";
-// Location of the apex image.
-static const char* kApexImage = "/system/framework/apex.art";
+static const char* ENABLE_JITZYGOTE_IMAGE = "enable_apex_image";
+// Location of the JIT Zygote image.
+static const char* kJitZygoteImage =
+ "boot.art:/nonx/boot-framework.art!/system/etc/boot-image.prof";
// Phenotype property name for enabling profiling the boot class path.
static const char* PROFILE_BOOT_CLASS_PATH = "profilebootclasspath";
@@ -405,9 +406,9 @@
GetBoolProperty(kMinidebugInfoSystemProperty, kMinidebugInfoSystemPropertyDefault);
std::string boot_image;
- std::string use_apex_image =
+ std::string use_jitzygote_image =
server_configurable_flags::GetServerConfigurableFlag(RUNTIME_NATIVE_BOOT_NAMESPACE,
- ENABLE_APEX_IMAGE,
+ ENABLE_JITZYGOTE_IMAGE,
/*default_value=*/ "");
std::string profile_boot_class_path = GetProperty("dalvik.vm.profilebootclasspath", "");
@@ -417,10 +418,10 @@
PROFILE_BOOT_CLASS_PATH,
/*default_value=*/ profile_boot_class_path);
- if (use_apex_image == "true" || profile_boot_class_path == "true") {
- boot_image = StringPrintf("-Ximage:%s", kApexImage);
+ if (use_jitzygote_image == "true" || profile_boot_class_path == "true") {
+ boot_image = StringPrintf("--boot-image=%s", kJitZygoteImage);
} else {
- boot_image = MapPropertyToArg("dalvik.vm.boot-image", "-Ximage:%s");
+ boot_image = MapPropertyToArg("dalvik.vm.boot-image", "--boot-image=%s");
}
// clang FORTIFY doesn't let us use strlen in constant array bounds, so we
@@ -513,7 +514,8 @@
AddArg(instruction_set_variant_arg);
AddArg(instruction_set_features_arg);
- AddRuntimeArg(boot_image);
+ AddArg(boot_image);
+
AddRuntimeArg(bootclasspath);
AddRuntimeArg(dex2oat_Xms_arg);
AddRuntimeArg(dex2oat_Xmx_arg);
diff --git a/include/android/bitmap.h b/include/android/bitmap.h
index 412fc6b..727a4af 100644
--- a/include/android/bitmap.h
+++ b/include/android/bitmap.h
@@ -81,8 +81,8 @@
enum {
/** If this bit is set in AndroidBitmapInfo.flags, the Bitmap uses the
- * HARDWARE Config, and its AHardwareBuffer can be retrieved via
- * AndroidBitmap_getHardwareBuffer.
+ * HARDWARE Config, and its {@link AHardwareBuffer} can be retrieved via
+ * {@link AndroidBitmap_getHardwareBuffer}.
*/
ANDROID_BITMAP_FLAGS_IS_HARDWARE = 1 << 31,
};
@@ -120,10 +120,10 @@
#if __ANDROID_API__ >= 30
/**
- * Given a java bitmap object, return its ADataSpace.
+ * Given a java bitmap object, return its {@link ADataSpace}.
*
- * Note that ADataSpace only exposes a few values. This may return
- * ADATASPACE_UNKNOWN, even for Named ColorSpaces, if they have no
+ * Note that {@link ADataSpace} only exposes a few values. This may return
+ * {@link ADATASPACE_UNKNOWN}, even for Named ColorSpaces, if they have no
* corresponding ADataSpace.
*/
int32_t AndroidBitmap_getDataSpace(JNIEnv* env, jobject jbitmap) __INTRODUCED_IN(30);
@@ -206,17 +206,17 @@
* @param dataspace {@link ADataSpace} describing the color space of the
* pixels.
* @param pixels Pointer to pixels to compress.
- * @param format (@link AndroidBitmapCompressFormat} to compress to.
+ * @param format {@link AndroidBitmapCompressFormat} to compress to.
* @param quality Hint to the compressor, 0-100. The value is interpreted
* differently depending on the
* {@link AndroidBitmapCompressFormat}.
* @param userContext User-defined data which will be passed to the supplied
* {@link AndroidBitmap_CompressWriteFunc} each time it is
* called. May be null.
- * @parm fn Function that writes the compressed data. Will be called each time
- * the compressor has compressed more data that is ready to be
- * written. May be called more than once for each call to this method.
- * May not be null.
+ * @param fn Function that writes the compressed data. Will be called each time
+ * the compressor has compressed more data that is ready to be
+ * written. May be called more than once for each call to this method.
+ * May not be null.
* @return AndroidBitmap functions result code.
*/
int AndroidBitmap_compress(const AndroidBitmapInfo* info,
@@ -235,11 +235,11 @@
*
* @param bitmap Handle to an android.graphics.Bitmap.
* @param outBuffer On success, is set to a pointer to the
- * AHardwareBuffer associated with bitmap. This acquires
+ * {@link AHardwareBuffer} associated with bitmap. This acquires
* a reference on the buffer, and the client must call
- * AHardwareBuffer_release when finished with it.
+ * {@link AHardwareBuffer_release} when finished with it.
* @return AndroidBitmap functions result code.
- * ANDROID_BITMAP_RESULT_BAD_PARAMETER if bitmap is not a
+ * {@link ANDROID_BITMAP_RESULT_BAD_PARAMETER} if bitmap is not a
* HARDWARE Bitmap.
*/
int AndroidBitmap_getHardwareBuffer(JNIEnv* env, jobject bitmap,
diff --git a/include/android/sensor.h b/include/android/sensor.h
index 12c00ad..e63ac4b 100644
--- a/include/android/sensor.h
+++ b/include/android/sensor.h
@@ -15,6 +15,9 @@
*/
/**
+ * Structures and functions to receive and process sensor events in
+ * native code.
+ *
* @addtogroup Sensor
* @{
*/
@@ -42,12 +45,6 @@
* - DO NOT CHANGE THE LAYOUT OR SIZE OF STRUCTURES
*/
-/**
- * Structures and functions to receive and process sensor events in
- * native code.
- *
- */
-
#include <android/looper.h>
#include <stdbool.h>
diff --git a/include/ui/FatVector.h b/include/ui/FatVector.h
new file mode 120000
index 0000000..c2047c0
--- /dev/null
+++ b/include/ui/FatVector.h
@@ -0,0 +1 @@
+../../libs/ui/include/ui/FatVector.h
\ No newline at end of file
diff --git a/libs/gui/tests/BLASTBufferQueue_test.cpp b/libs/gui/tests/BLASTBufferQueue_test.cpp
index b40eb14..e184c7f 100644
--- a/libs/gui/tests/BLASTBufferQueue_test.cpp
+++ b/libs/gui/tests/BLASTBufferQueue_test.cpp
@@ -239,7 +239,7 @@
ASSERT_EQ(&next, adapter.getNextTransaction());
}
-TEST_F(BLASTBufferQueueTest, onFrameAvailable_ApplyDesiredPresentTime) {
+TEST_F(BLASTBufferQueueTest, DISABLED_onFrameAvailable_ApplyDesiredPresentTime) {
BLASTBufferQueueHelper adapter(mSurfaceControl, mDisplayWidth, mDisplayHeight);
sp<IGraphicBufferProducer> igbProducer;
setUpProducer(adapter, igbProducer);
diff --git a/libs/renderengine/gl/GLESRenderEngine.cpp b/libs/renderengine/gl/GLESRenderEngine.cpp
index e523836..e11b59f 100644
--- a/libs/renderengine/gl/GLESRenderEngine.cpp
+++ b/libs/renderengine/gl/GLESRenderEngine.cpp
@@ -984,18 +984,19 @@
}
std::unique_ptr<BindNativeBufferAsFramebuffer> fbo;
- // Let's find the topmost layer requesting background blur (if any.)
- // Blurs in multiple layers are not supported, given the cost of the shader.
- const LayerSettings* blurLayer = nullptr;
+ // Gathering layers that requested blur, we'll need them to decide when to render to an
+ // offscreen buffer, and when to render to the native buffer.
+ std::deque<const LayerSettings*> blurLayers;
if (CC_LIKELY(mBlurFilter != nullptr)) {
- for (auto const layer : layers) {
+ for (auto layer : layers) {
if (layer->backgroundBlurRadius > 0) {
- blurLayer = layer;
+ blurLayers.push_back(layer);
}
}
}
+ const auto blurLayersSize = blurLayers.size();
- if (blurLayer == nullptr) {
+ if (blurLayersSize == 0) {
fbo = std::make_unique<BindNativeBufferAsFramebuffer>(*this, buffer, useFramebufferCache);
if (fbo->getStatus() != NO_ERROR) {
ALOGE("Failed to bind framebuffer! Aborting GPU composition for buffer (%p).",
@@ -1006,7 +1007,8 @@
setViewportAndProjection(display.physicalDisplay, display.clip);
} else {
setViewportAndProjection(display.physicalDisplay, display.clip);
- auto status = mBlurFilter->setAsDrawTarget(display, blurLayer->backgroundBlurRadius);
+ auto status =
+ mBlurFilter->setAsDrawTarget(display, blurLayers.front()->backgroundBlurRadius);
if (status != NO_ERROR) {
ALOGE("Failed to prepare blur filter! Aborting GPU composition for buffer (%p).",
buffer->handle);
@@ -1039,7 +1041,9 @@
.setCropCoords(2 /* size */)
.build();
for (auto const layer : layers) {
- if (blurLayer == layer) {
+ if (blurLayers.size() > 0 && blurLayers.front() == layer) {
+ blurLayers.pop_front();
+
auto status = mBlurFilter->prepare();
if (status != NO_ERROR) {
ALOGE("Failed to render blur effect! Aborting GPU composition for buffer (%p).",
@@ -1048,18 +1052,26 @@
return status;
}
- fbo = std::make_unique<BindNativeBufferAsFramebuffer>(*this, buffer,
- useFramebufferCache);
- status = fbo->getStatus();
+ if (blurLayers.size() == 0) {
+ // Done blurring, time to bind the native FBO and render our blur onto it.
+ fbo = std::make_unique<BindNativeBufferAsFramebuffer>(*this, buffer,
+ useFramebufferCache);
+ status = fbo->getStatus();
+ setViewportAndProjection(display.physicalDisplay, display.clip);
+ } else {
+ // There's still something else to blur, so let's keep rendering to our FBO
+ // instead of to the display.
+ status = mBlurFilter->setAsDrawTarget(display,
+ blurLayers.front()->backgroundBlurRadius);
+ }
if (status != NO_ERROR) {
ALOGE("Failed to bind framebuffer! Aborting GPU composition for buffer (%p).",
buffer->handle);
checkErrors("Can't bind native framebuffer");
return status;
}
- setViewportAndProjection(display.physicalDisplay, display.clip);
- status = mBlurFilter->render();
+ status = mBlurFilter->render(blurLayersSize > 1);
if (status != NO_ERROR) {
ALOGE("Failed to render blur effect! Aborting GPU composition for buffer (%p).",
buffer->handle);
diff --git a/libs/renderengine/gl/filters/BlurFilter.cpp b/libs/renderengine/gl/filters/BlurFilter.cpp
index f8b0a7a..b1a84bd 100644
--- a/libs/renderengine/gl/filters/BlurFilter.cpp
+++ b/libs/renderengine/gl/filters/BlurFilter.cpp
@@ -96,13 +96,17 @@
mEngine.checkErrors("Drawing blur mesh");
}
-status_t BlurFilter::render() {
+status_t BlurFilter::render(bool multiPass) {
ATRACE_NAME("BlurFilter::render");
// Now let's scale our blur up. It will be interpolated with the larger composited
// texture for the first frames, to hide downscaling artifacts.
GLfloat mix = fmin(1.0, mRadius / kMaxCrossFadeRadius);
- if (mix >= 1) {
+
+ // When doing multiple passes, we cannot try to read mCompositionFbo, given that we'll
+ // be writing onto it. Let's disable the crossfade, otherwise we'd need 1 extra frame buffer,
+ // as large as the screen size.
+ if (mix >= 1 || multiPass) {
mBlurredFbo.bindAsReadBuffer();
glBlitFramebuffer(0, 0, mBlurredFbo.getBufferWidth(), mBlurredFbo.getBufferHeight(), 0, 0,
mDisplayWidth, mDisplayHeight, GL_COLOR_BUFFER_BIT, GL_LINEAR);
diff --git a/libs/renderengine/gl/filters/BlurFilter.h b/libs/renderengine/gl/filters/BlurFilter.h
index 67b3895..52dc8aa 100644
--- a/libs/renderengine/gl/filters/BlurFilter.h
+++ b/libs/renderengine/gl/filters/BlurFilter.h
@@ -45,7 +45,7 @@
// Execute blur passes, rendering to offscreen texture.
virtual status_t prepare() = 0;
// Render blur to the bound framebuffer (screen).
- status_t render();
+ status_t render(bool multiPass);
protected:
uint32_t mRadius;
diff --git a/libs/ui/Region.cpp b/libs/ui/Region.cpp
index bf487c4..cd2a448 100644
--- a/libs/ui/Region.cpp
+++ b/libs/ui/Region.cpp
@@ -67,19 +67,20 @@
// ----------------------------------------------------------------------------
Region::Region() {
- mStorage.add(Rect(0,0));
+ mStorage.push_back(Rect(0, 0));
}
Region::Region(const Region& rhs)
- : mStorage(rhs.mStorage)
{
+ mStorage.clear();
+ mStorage.insert(mStorage.begin(), rhs.mStorage.begin(), rhs.mStorage.end());
#if defined(VALIDATE_REGIONS)
validate(rhs, "rhs copy-ctor");
#endif
}
Region::Region(const Rect& rhs) {
- mStorage.add(rhs);
+ mStorage.push_back(rhs);
}
Region::~Region()
@@ -100,8 +101,8 @@
* final, correctly ordered region buffer. Each rectangle will be compared with the span directly
* above it, and subdivided to resolve any remaining T-junctions.
*/
-static void reverseRectsResolvingJunctions(const Rect* begin, const Rect* end,
- Vector<Rect>& dst, int spanDirection) {
+static void reverseRectsResolvingJunctions(const Rect* begin, const Rect* end, FatVector<Rect>& dst,
+ int spanDirection) {
dst.clear();
const Rect* current = end - 1;
@@ -109,7 +110,7 @@
// add first span immediately
do {
- dst.add(*current);
+ dst.push_back(*current);
current--;
} while (current->top == lastTop && current >= begin);
@@ -147,12 +148,12 @@
if (prev.right <= left) break;
if (prev.right > left && prev.right < right) {
- dst.add(Rect(prev.right, top, right, bottom));
+ dst.push_back(Rect(prev.right, top, right, bottom));
right = prev.right;
}
if (prev.left > left && prev.left < right) {
- dst.add(Rect(prev.left, top, right, bottom));
+ dst.push_back(Rect(prev.left, top, right, bottom));
right = prev.left;
}
@@ -166,12 +167,12 @@
if (prev.left >= right) break;
if (prev.left > left && prev.left < right) {
- dst.add(Rect(left, top, prev.left, bottom));
+ dst.push_back(Rect(left, top, prev.left, bottom));
left = prev.left;
}
if (prev.right > left && prev.right < right) {
- dst.add(Rect(left, top, prev.right, bottom));
+ dst.push_back(Rect(left, top, prev.right, bottom));
left = prev.right;
}
// if an entry in the previous span is too far left, nothing further right in the
@@ -183,7 +184,7 @@
}
if (left < right) {
- dst.add(Rect(left, top, right, bottom));
+ dst.push_back(Rect(left, top, right, bottom));
}
current--;
@@ -201,13 +202,14 @@
if (r.isEmpty()) return r;
if (r.isRect()) return r;
- Vector<Rect> reversed;
+ FatVector<Rect> reversed;
reverseRectsResolvingJunctions(r.begin(), r.end(), reversed, direction_RTL);
Region outputRegion;
- reverseRectsResolvingJunctions(reversed.begin(), reversed.end(),
- outputRegion.mStorage, direction_LTR);
- outputRegion.mStorage.add(r.getBounds()); // to make region valid, mStorage must end with bounds
+ reverseRectsResolvingJunctions(reversed.data(), reversed.data() + reversed.size(),
+ outputRegion.mStorage, direction_LTR);
+ outputRegion.mStorage.push_back(
+ r.getBounds()); // to make region valid, mStorage must end with bounds
#if defined(VALIDATE_REGIONS)
validate(outputRegion, "T-Junction free region");
@@ -222,7 +224,8 @@
validate(*this, "this->operator=");
validate(rhs, "rhs.operator=");
#endif
- mStorage = rhs.mStorage;
+ mStorage.clear();
+ mStorage.insert(mStorage.begin(), rhs.mStorage.begin(), rhs.mStorage.end());
return *this;
}
@@ -231,7 +234,7 @@
if (mStorage.size() >= 2) {
const Rect bounds(getBounds());
mStorage.clear();
- mStorage.add(bounds);
+ mStorage.push_back(bounds);
}
return *this;
}
@@ -255,25 +258,25 @@
void Region::clear()
{
mStorage.clear();
- mStorage.add(Rect(0,0));
+ mStorage.push_back(Rect(0, 0));
}
void Region::set(const Rect& r)
{
mStorage.clear();
- mStorage.add(r);
+ mStorage.push_back(r);
}
void Region::set(int32_t w, int32_t h)
{
mStorage.clear();
- mStorage.add(Rect(w, h));
+ mStorage.push_back(Rect(w, h));
}
void Region::set(uint32_t w, uint32_t h)
{
mStorage.clear();
- mStorage.add(Rect(w, h));
+ mStorage.push_back(Rect(w, h));
}
bool Region::isTriviallyEqual(const Region& region) const {
@@ -299,8 +302,7 @@
void Region::addRectUnchecked(int l, int t, int r, int b)
{
Rect rect(l,t,r,b);
- size_t where = mStorage.size() - 1;
- mStorage.insertAt(rect, where, 1);
+ mStorage.insert(mStorage.end() - 1, rect);
}
// ----------------------------------------------------------------------------
@@ -350,7 +352,7 @@
Region& Region::scaleSelf(float sx, float sy) {
size_t count = mStorage.size();
- Rect* rects = mStorage.editArray();
+ Rect* rects = mStorage.data();
while (count) {
rects->left = static_cast<int32_t>(static_cast<float>(rects->left) * sx + 0.5f);
rects->right = static_cast<int32_t>(static_cast<float>(rects->right) * sx + 0.5f);
@@ -455,10 +457,10 @@
class Region::rasterizer : public region_operator<Rect>::region_rasterizer
{
Rect bounds;
- Vector<Rect>& storage;
+ FatVector<Rect>& storage;
Rect* head;
Rect* tail;
- Vector<Rect> span;
+ FatVector<Rect> span;
Rect* cur;
public:
explicit rasterizer(Region& reg)
@@ -485,8 +487,8 @@
flushSpan();
}
if (storage.size()) {
- bounds.top = storage.itemAt(0).top;
- bounds.bottom = storage.top().bottom;
+ bounds.top = storage.front().top;
+ bounds.bottom = storage.back().bottom;
if (storage.size() == 1) {
storage.clear();
}
@@ -494,7 +496,7 @@
bounds.left = 0;
bounds.right = 0;
}
- storage.add(bounds);
+ storage.push_back(bounds);
}
void Region::rasterizer::operator()(const Rect& rect)
@@ -509,15 +511,15 @@
return;
}
}
- span.add(rect);
- cur = span.editArray() + (span.size() - 1);
+ span.push_back(rect);
+ cur = span.data() + (span.size() - 1);
}
void Region::rasterizer::flushSpan()
{
bool merge = false;
if (tail-head == ssize_t(span.size())) {
- Rect const* p = span.editArray();
+ Rect const* p = span.data();
Rect const* q = head;
if (p->top == q->bottom) {
merge = true;
@@ -532,17 +534,17 @@
}
}
if (merge) {
- const int bottom = span[0].bottom;
+ const int bottom = span.front().bottom;
Rect* r = head;
while (r != tail) {
r->bottom = bottom;
r++;
}
} else {
- bounds.left = min(span.itemAt(0).left, bounds.left);
- bounds.right = max(span.top().right, bounds.right);
- storage.appendVector(span);
- tail = storage.editArray() + storage.size();
+ bounds.left = min(span.front().left, bounds.left);
+ bounds.right = max(span.back().right, bounds.right);
+ storage.insert(storage.end(), span.begin(), span.end());
+ tail = storage.data() + storage.size();
head = tail - span.size();
}
span.clear();
@@ -550,7 +552,7 @@
bool Region::validate(const Region& reg, const char* name, bool silent)
{
- if (reg.mStorage.isEmpty()) {
+ if (reg.mStorage.empty()) {
ALOGE_IF(!silent, "%s: mStorage is empty, which is never valid", name);
// return immediately as the code below assumes mStorage is non-empty
return false;
@@ -689,9 +691,8 @@
}
sk_dst.op(sk_lhs, sk_rhs, sk_op);
- if (sk_dst.isEmpty() && dst.isEmpty())
- return;
-
+ if (sk_dst.empty() && dst.empty()) return;
+
bool same = true;
Region::const_iterator head = dst.begin();
Region::const_iterator const tail = dst.end();
@@ -786,7 +787,7 @@
validate(reg, "translate (before)");
#endif
size_t count = reg.mStorage.size();
- Rect* rects = reg.mStorage.editArray();
+ Rect* rects = reg.mStorage.data();
while (count) {
rects->offsetBy(dx, dy);
rects++;
@@ -866,24 +867,25 @@
ALOGE("Region::unflatten() failed, invalid region");
return BAD_VALUE;
}
- mStorage = result.mStorage;
+ mStorage.clear();
+ mStorage.insert(mStorage.begin(), result.mStorage.begin(), result.mStorage.end());
return NO_ERROR;
}
// ----------------------------------------------------------------------------
Region::const_iterator Region::begin() const {
- return mStorage.array();
+ return mStorage.data();
}
Region::const_iterator Region::end() const {
// Workaround for b/77643177
// mStorage should never be empty, but somehow it is and it's causing
// an abort in ubsan
- if (mStorage.isEmpty()) return mStorage.array();
+ if (mStorage.empty()) return mStorage.data();
size_t numRects = isRect() ? 1 : mStorage.size() - 1;
- return mStorage.array() + numRects;
+ return mStorage.data() + numRects;
}
Rect const* Region::getArray(size_t* count) const {
diff --git a/libs/ui/include/ui/FatVector.h b/libs/ui/include/ui/FatVector.h
new file mode 100644
index 0000000..25fe3a0
--- /dev/null
+++ b/libs/ui/include/ui/FatVector.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2019, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_REGION_FAT_VECTOR_H
+#define ANDROID_REGION_FAT_VECTOR_H
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <utils/Log.h>
+#include <type_traits>
+
+#include <vector>
+
+namespace android {
+
+template <typename T, size_t SIZE = 4>
+class InlineStdAllocator {
+public:
+ struct Allocation {
+ private:
+ Allocation(const Allocation&) = delete;
+ void operator=(const Allocation&) = delete;
+
+ public:
+ Allocation() {}
+ // char array instead of T array, so memory is uninitialized, with no destructors run
+ char array[sizeof(T) * SIZE];
+ bool inUse = false;
+ };
+
+ typedef T value_type; // needed to implement std::allocator
+ typedef T* pointer; // needed to implement std::allocator
+
+ explicit InlineStdAllocator(Allocation& allocation) : mAllocation(allocation) {}
+ InlineStdAllocator(const InlineStdAllocator& other) : mAllocation(other.mAllocation) {}
+ ~InlineStdAllocator() {}
+
+ T* allocate(size_t num, const void* = 0) {
+ if (!mAllocation.inUse && num <= SIZE) {
+ mAllocation.inUse = true;
+ return static_cast<T*>(static_cast<void*>(mAllocation.array));
+ } else {
+ return static_cast<T*>(static_cast<void*>(malloc(num * sizeof(T))));
+ }
+ }
+
+ void deallocate(pointer p, size_t) {
+ if (p == static_cast<T*>(static_cast<void*>(mAllocation.array))) {
+ mAllocation.inUse = false;
+ } else {
+ // 'free' instead of delete here - destruction handled separately
+ free(p);
+ }
+ }
+ Allocation& mAllocation;
+};
+
+/**
+ * std::vector with SIZE elements preallocated into an internal buffer.
+ *
+ * Useful for avoiding the cost of malloc in cases where only SIZE or
+ * fewer elements are needed in the common case.
+ */
+template <typename T, size_t SIZE = 4>
+class FatVector : public std::vector<T, InlineStdAllocator<T, SIZE>> {
+public:
+ FatVector()
+ : std::vector<T, InlineStdAllocator<T, SIZE>>(InlineStdAllocator<T, SIZE>(mAllocation)) {
+ this->reserve(SIZE);
+ }
+
+ explicit FatVector(size_t capacity) : FatVector() { this->resize(capacity); }
+
+private:
+ typename InlineStdAllocator<T, SIZE>::Allocation mAllocation;
+};
+
+} // namespace android
+
+#endif // ANDROID_REGION_FAT_VECTOR_H
diff --git a/libs/ui/include/ui/Region.h b/libs/ui/include/ui/Region.h
index 2db3b10..6bb7b8d 100644
--- a/libs/ui/include/ui/Region.h
+++ b/libs/ui/include/ui/Region.h
@@ -21,13 +21,13 @@
#include <sys/types.h>
#include <ostream>
-#include <utils/Vector.h>
-
#include <ui/Rect.h>
#include <utils/Flattenable.h>
#include <android-base/macros.h>
+#include "FatVector.h"
+
#include <string>
namespace android {
@@ -180,7 +180,7 @@
// with an extra Rect as the last element which is set to the
// bounds of the region. However, if the region is
// a simple Rect then mStorage contains only that rect.
- Vector<Rect> mStorage;
+ FatVector<Rect> mStorage;
};
@@ -235,4 +235,3 @@
}; // namespace android
#endif // ANDROID_UI_REGION_H
-
diff --git a/libs/ui/include_vndk/ui/FatVector.h b/libs/ui/include_vndk/ui/FatVector.h
new file mode 120000
index 0000000..bf30166
--- /dev/null
+++ b/libs/ui/include_vndk/ui/FatVector.h
@@ -0,0 +1 @@
+../../include/ui/FatVector.h
\ No newline at end of file
diff --git a/services/inputflinger/reader/mapper/TouchInputMapper.cpp b/services/inputflinger/reader/mapper/TouchInputMapper.cpp
index b66caca..3b20173 100644
--- a/services/inputflinger/reader/mapper/TouchInputMapper.cpp
+++ b/services/inputflinger/reader/mapper/TouchInputMapper.cpp
@@ -761,7 +761,11 @@
(mDeviceMode == DEVICE_MODE_DIRECT && mConfig.showTouches)) {
if (mPointerController == nullptr || viewportChanged) {
mPointerController = getPolicy()->obtainPointerController(getDeviceId());
- mPointerController->setDisplayViewport(mViewport);
+ // Set the DisplayViewport for the PointerController to the default pointer display
+ // that is recommended by the configuration before using it.
+ std::optional<DisplayViewport> defaultViewport =
+ mConfig.getDisplayViewportById(mConfig.defaultPointerDisplayId);
+ mPointerController->setDisplayViewport(defaultViewport.value_or(mViewport));
}
} else {
mPointerController.clear();
diff --git a/services/sensorservice/SensorService.cpp b/services/sensorservice/SensorService.cpp
index e803c9a..914a4cb 100644
--- a/services/sensorservice/SensorService.cpp
+++ b/services/sensorservice/SensorService.cpp
@@ -520,6 +520,10 @@
status_t SensorService::dumpProtoLocked(int fd, ConnectionSafeAutolock* connLock) const {
using namespace service::SensorServiceProto;
util::ProtoOutputStream proto;
+ proto.write(INIT_STATUS, int(SensorDevice::getInstance().initCheck()));
+ if (!mSensors.hasAnySensor()) {
+ return proto.flush(fd) ? OK : UNKNOWN_ERROR;
+ }
const bool privileged = IPCThreadState::self()->getCallingUid() == 0;
timespec curTime;
diff --git a/services/surfaceflinger/BufferQueueLayer.cpp b/services/surfaceflinger/BufferQueueLayer.cpp
index 3cc803e..e65064b 100644
--- a/services/surfaceflinger/BufferQueueLayer.cpp
+++ b/services/surfaceflinger/BufferQueueLayer.cpp
@@ -441,6 +441,7 @@
status_t result = mQueueItemCondition.waitRelative(mQueueItemLock, ms2ns(500));
if (result != NO_ERROR) {
ALOGE("[%s] Timed out waiting on callback", getDebugName());
+ break;
}
}
@@ -469,6 +470,7 @@
status_t result = mQueueItemCondition.waitRelative(mQueueItemLock, ms2ns(500));
if (result != NO_ERROR) {
ALOGE("[%s] Timed out waiting on callback", getDebugName());
+ break;
}
}
diff --git a/services/surfaceflinger/Scheduler/RefreshRateConfigs.cpp b/services/surfaceflinger/Scheduler/RefreshRateConfigs.cpp
index c73e825..8202515 100644
--- a/services/surfaceflinger/Scheduler/RefreshRateConfigs.cpp
+++ b/services/surfaceflinger/Scheduler/RefreshRateConfigs.cpp
@@ -229,6 +229,15 @@
return *mCurrentRefreshRate;
}
+const RefreshRate& RefreshRateConfigs::getCurrentRefreshRateByPolicy() const {
+ std::lock_guard lock(mLock);
+ if (std::find(mAvailableRefreshRates.begin(), mAvailableRefreshRates.end(),
+ mCurrentRefreshRate) != mAvailableRefreshRates.end()) {
+ return *mCurrentRefreshRate;
+ }
+ return mRefreshRates.at(mDefaultConfig);
+}
+
void RefreshRateConfigs::setCurrentConfigId(HwcConfigIndexType configId) {
std::lock_guard lock(mLock);
mCurrentRefreshRate = &mRefreshRates.at(configId);
diff --git a/services/surfaceflinger/Scheduler/RefreshRateConfigs.h b/services/surfaceflinger/Scheduler/RefreshRateConfigs.h
index fc95959..e5bb557 100644
--- a/services/surfaceflinger/Scheduler/RefreshRateConfigs.h
+++ b/services/surfaceflinger/Scheduler/RefreshRateConfigs.h
@@ -149,6 +149,10 @@
// Returns the current refresh rate
const RefreshRate& getCurrentRefreshRate() const EXCLUDES(mLock);
+ // Returns the current refresh rate, if allowed. Otherwise the default that is allowed by
+ // the policy.
+ const RefreshRate& getCurrentRefreshRateByPolicy() const;
+
// Returns the refresh rate that corresponds to a HwcConfigIndexType. This won't change at
// runtime.
const RefreshRate& getRefreshRateFromConfigId(HwcConfigIndexType configId) const {
diff --git a/services/surfaceflinger/Scheduler/Scheduler.cpp b/services/surfaceflinger/Scheduler/Scheduler.cpp
index 49a269f..94791eb 100644
--- a/services/surfaceflinger/Scheduler/Scheduler.cpp
+++ b/services/surfaceflinger/Scheduler/Scheduler.cpp
@@ -108,7 +108,8 @@
mUseContentDetectionV2(useContentDetectionV2) {
using namespace sysprop;
- if (property_get_bool("debug.sf.use_smart_90_for_video", 0) || use_smart_90_for_video(false)) {
+ if (property_get_bool("debug.sf.use_content_detection_for_refresh_rate", 0) ||
+ use_content_detection_for_refresh_rate(false)) {
if (mUseContentDetectionV2) {
mLayerHistory = std::make_unique<scheduler::impl::LayerHistoryV2>();
} else {
@@ -624,8 +625,8 @@
.configId;
}
- // There are no signals for refresh rate, just leave it as is
- return mRefreshRateConfigs.getCurrentRefreshRate().configId;
+ // There are no signals for refresh rate, just leave it as is.
+ return mRefreshRateConfigs.getCurrentRefreshRateByPolicy().configId;
}
std::optional<HwcConfigIndexType> Scheduler::getPreferredConfigId() {
diff --git a/services/surfaceflinger/SurfaceFlingerProperties.cpp b/services/surfaceflinger/SurfaceFlingerProperties.cpp
index e199b53..269cf94 100644
--- a/services/surfaceflinger/SurfaceFlingerProperties.cpp
+++ b/services/surfaceflinger/SurfaceFlingerProperties.cpp
@@ -18,6 +18,7 @@
#include <android/hardware/configstore/1.1/ISurfaceFlingerConfigs.h>
#include <android/hardware/configstore/1.1/types.h>
#include <configstore/Utils.h>
+#include <utils/Log.h>
#include <log/log.h>
#include <cstdlib>
@@ -263,8 +264,17 @@
return defaultValue;
}
-bool use_smart_90_for_video(bool defaultValue) {
- auto temp = SurfaceFlingerProperties::use_smart_90_for_video();
+bool use_content_detection_for_refresh_rate(bool defaultValue) {
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wdeprecated-declarations"
+ auto smart_90_deprecated = SurfaceFlingerProperties::use_smart_90_for_video();
+#pragma clang diagnostic pop
+ if (smart_90_deprecated.has_value()) {
+ ALOGW("Using deprecated use_smart_90_for_video sysprop. Value: %d", *smart_90_deprecated);
+ return *smart_90_deprecated;
+ }
+
+ auto temp = SurfaceFlingerProperties::use_content_detection_for_refresh_rate();
if (temp.has_value()) {
return *temp;
}
diff --git a/services/surfaceflinger/SurfaceFlingerProperties.h b/services/surfaceflinger/SurfaceFlingerProperties.h
index e394cca..440df49 100644
--- a/services/surfaceflinger/SurfaceFlingerProperties.h
+++ b/services/surfaceflinger/SurfaceFlingerProperties.h
@@ -81,7 +81,7 @@
int32_t set_display_power_timer_ms(int32_t defaultValue);
-bool use_smart_90_for_video(bool defaultValue);
+bool use_content_detection_for_refresh_rate(bool defaultValue);
bool enable_protected_contents(bool defaultValue);
diff --git a/services/surfaceflinger/sysprop/SurfaceFlingerProperties.sysprop b/services/surfaceflinger/sysprop/SurfaceFlingerProperties.sysprop
index 764181a..71f8d6a 100644
--- a/services/surfaceflinger/sysprop/SurfaceFlingerProperties.sysprop
+++ b/services/surfaceflinger/sysprop/SurfaceFlingerProperties.sysprop
@@ -345,14 +345,26 @@
prop_name: "ro.surface_flinger.set_display_power_timer_ms"
}
+# useContentDetectionForRefreshRate indicates whether Scheduler should detect content FPS, and try
+# to adjust the screen refresh rate based on that.
+prop {
+ api_name: "use_content_detection_for_refresh_rate"
+ type: Boolean
+ scope: Public
+ access: Readonly
+ prop_name: "ro.surface_flinger.use_content_detection_for_refresh_rate"
+}
+
# useSmart90ForVideo indicates whether Scheduler should detect content FPS, and try to adjust the
# screen refresh rate based on that.
+# Replaced by useContentDetectionForRefreshRate
prop {
api_name: "use_smart_90_for_video"
type: Boolean
scope: Public
access: Readonly
prop_name: "ro.surface_flinger.use_smart_90_for_video"
+ deprecated: true
}
prop {
diff --git a/services/surfaceflinger/sysprop/api/SurfaceFlingerProperties-current.txt b/services/surfaceflinger/sysprop/api/SurfaceFlingerProperties-current.txt
index bee99f4..cdfd0f5 100644
--- a/services/surfaceflinger/sysprop/api/SurfaceFlingerProperties-current.txt
+++ b/services/surfaceflinger/sysprop/api/SurfaceFlingerProperties-current.txt
@@ -113,12 +113,17 @@
prop_name: "ro.surface_flinger.use_color_management"
}
prop {
+ api_name: "use_content_detection_for_refresh_rate"
+ prop_name: "ro.surface_flinger.use_content_detection_for_refresh_rate"
+ }
+ prop {
api_name: "use_context_priority"
prop_name: "ro.surface_flinger.use_context_priority"
}
prop {
api_name: "use_smart_90_for_video"
prop_name: "ro.surface_flinger.use_smart_90_for_video"
+ deprecated: true
}
prop {
api_name: "use_vr_flinger"
diff --git a/services/surfaceflinger/tests/LayerTypeAndRenderTypeTransaction_test.cpp b/services/surfaceflinger/tests/LayerTypeAndRenderTypeTransaction_test.cpp
index 3bbd12a..9e619ca 100644
--- a/services/surfaceflinger/tests/LayerTypeAndRenderTypeTransaction_test.cpp
+++ b/services/surfaceflinger/tests/LayerTypeAndRenderTypeTransaction_test.cpp
@@ -279,6 +279,48 @@
50 /* tolerance */);
}
+TEST_P(LayerTypeAndRenderTypeTransactionTest, SetBackgroundBlurRadiusOnMultipleLayers) {
+ char value[PROPERTY_VALUE_MAX];
+ property_get("ro.surface_flinger.supports_background_blur", value, "0");
+ if (!atoi(value)) {
+ // This device doesn't support blurs, no-op.
+ return;
+ }
+
+ auto size = 256;
+ auto center = size / 2;
+ auto blurRadius = 50;
+
+ sp<SurfaceControl> backgroundLayer;
+ ASSERT_NO_FATAL_FAILURE(backgroundLayer = createLayer("background", size, size));
+ ASSERT_NO_FATAL_FAILURE(fillLayerColor(backgroundLayer, Color::GREEN, size, size));
+
+ sp<SurfaceControl> leftLayer;
+ ASSERT_NO_FATAL_FAILURE(leftLayer = createLayer("left", size / 2, size));
+ ASSERT_NO_FATAL_FAILURE(fillLayerColor(leftLayer, Color::RED, size / 2, size));
+
+ sp<SurfaceControl> blurLayer1;
+ auto centralSquareSize = size / 2;
+ ASSERT_NO_FATAL_FAILURE(blurLayer1 =
+ createLayer("blur1", centralSquareSize, centralSquareSize));
+ ASSERT_NO_FATAL_FAILURE(
+ fillLayerColor(blurLayer1, Color::BLUE, centralSquareSize, centralSquareSize));
+
+ sp<SurfaceControl> blurLayer2;
+ ASSERT_NO_FATAL_FAILURE(blurLayer2 = createLayer("blur2", size, size));
+ ASSERT_NO_FATAL_FAILURE(
+ fillLayerColor(blurLayer2, Color::TRANSPARENT, centralSquareSize, centralSquareSize));
+
+ Transaction()
+ .setBackgroundBlurRadius(blurLayer1, blurRadius)
+ .setBackgroundBlurRadius(blurLayer2, blurRadius)
+ .apply();
+
+ auto shot = getScreenCapture();
+ shot->expectColor(Rect(center - 5, center - 5, center, center), Color{100, 100, 100, 255},
+ 40 /* tolerance */);
+}
+
TEST_P(LayerTypeAndRenderTypeTransactionTest, SetColorWithBuffer) {
sp<SurfaceControl> bufferLayer;
ASSERT_NO_FATAL_FAILURE(bufferLayer = createLayer("test", 32, 32));