diff --git a/include/android/thermal.h b/include/android/thermal.h
index 83582d6..eb81534 100644
--- a/include/android/thermal.h
+++ b/include/android/thermal.h
@@ -53,7 +53,7 @@
 #include <sys/types.h>
 
 #if !defined(__INTRODUCED_IN)
-#define __INTRODUCED_IN(30) /* Introduced in API level 30 */
+#define __INTRODUCED_IN(__api_level) /* nothing */
 #endif
 
 #ifdef __cplusplus
@@ -181,6 +181,51 @@
 
 #endif  //  __ANDROID_API__ >= 30
 
+#if __ANDROID_API__ >= 31
+
+/**
+ * Provides an estimate of how much thermal headroom the device currently has before
+ * hitting severe throttling.
+ *
+ * Note that this only attempts to track the headroom of slow-moving sensors, such as
+ * the skin temperature sensor. This means that there is no benefit to calling this function
+ * more frequently than about once per second, and attempted to call significantly
+ * more frequently may result in the function returning {@code NaN}.
+ *
+ * In addition, in order to be able to provide an accurate forecast, the system does
+ * not attempt to forecast until it has multiple temperature samples from which to
+ * extrapolate. This should only take a few seconds from the time of the first call,
+ * but during this time, no forecasting will occur, and the current headroom will be
+ * returned regardless of the value of {@code forecastSeconds}.
+ *
+ * The value returned is a non-negative float that represents how much of the thermal envelope
+ * is in use (or is forecasted to be in use). A value of 1.0 indicates that the device is
+ * (or will be) throttled at {@link #THERMAL_STATUS_SEVERE}. Such throttling can affect the
+ * CPU, GPU, and other subsystems. Values may exceed 1.0, but there is no implied mapping
+ * to specific thermal levels beyond that point. This means that values greater than 1.0
+ * may correspond to {@link #THERMAL_STATUS_SEVERE}, but may also represent heavier throttling.
+ *
+ * A value of 0.0 corresponds to a fixed distance from 1.0, but does not correspond to any
+ * particular thermal status or temperature. Values on (0.0, 1.0] may be expected to scale
+ * linearly with temperature, though temperature changes over time are typically not linear.
+ * Negative values will be clamped to 0.0 before returning.
+ *
+ * Available since API level 31.
+ *
+ * @param manager The manager instance to use.
+ *                Acquired via {@link AThermal_acquireManager}.
+ * @param forecastSeconds how many seconds into the future to forecast. Given that device
+ *                        conditions may change at any time, forecasts from further in the
+ *                        future will likely be less accurate than forecasts in the near future.
+ * @return a value greater than equal to 0.0, where 1.0 indicates the SEVERE throttling threshold,
+ *         as described above. Returns NaN if the device does not support this functionality or
+ *         if this function is called significantly faster than once per second.
+  */
+float AThermal_getThermalHeadroom(AThermalManager *manager,
+        int forecastSeconds) __INTRODUCED_IN(31);
+
+#endif  //  __ANDROID_API__ >= 31
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/opengl/libs/EGL/egl_platform_entries.cpp b/opengl/libs/EGL/egl_platform_entries.cpp
index 398efc0..f576660 100644
--- a/opengl/libs/EGL/egl_platform_entries.cpp
+++ b/opengl/libs/EGL/egl_platform_entries.cpp
@@ -128,6 +128,7 @@
         "EGL_KHR_stream_producer_eglsurface "
         "EGL_KHR_surfaceless_context "
         "EGL_KHR_wait_sync "                    // strongly recommended
+        "EGL_NV_context_priority_realtime "
         "EGL_NV_system_time "
         ;
 
diff --git a/services/inputflinger/reader/mapper/TouchInputMapper.cpp b/services/inputflinger/reader/mapper/TouchInputMapper.cpp
index ce12c27..18168d8 100644
--- a/services/inputflinger/reader/mapper/TouchInputMapper.cpp
+++ b/services/inputflinger/reader/mapper/TouchInputMapper.cpp
@@ -3644,6 +3644,9 @@
     const float xScaled = float(x - mRawPointerAxes.x.minValue) * mXScale;
     const float yScaled = float(y - mRawPointerAxes.y.minValue) * mYScale;
 
+    const float xScaledMax = float(mRawPointerAxes.x.maxValue - x) * mXScale;
+    const float yScaledMax = float(mRawPointerAxes.y.maxValue - y) * mYScale;
+
     // Rotate to surface coordinate.
     // 0 - no swap and reverse.
     // 90 - swap x/y and reverse y.
@@ -3655,16 +3658,16 @@
             y = yScaled + mYTranslate;
             break;
         case DISPLAY_ORIENTATION_90:
-            y = mSurfaceRight - xScaled;
+            y = xScaledMax - (mRawSurfaceWidth - mSurfaceRight);
             x = yScaled + mYTranslate;
             break;
         case DISPLAY_ORIENTATION_180:
-            x = mSurfaceRight - xScaled;
-            y = mSurfaceBottom - yScaled;
+            x = xScaledMax - (mRawSurfaceWidth - mSurfaceRight);
+            y = yScaledMax - (mRawSurfaceHeight - mSurfaceBottom);
             break;
         case DISPLAY_ORIENTATION_270:
             y = xScaled + mXTranslate;
-            x = mSurfaceBottom - yScaled;
+            x = yScaledMax - (mRawSurfaceHeight - mSurfaceBottom);
             break;
         default:
             assert(false);
diff --git a/services/inputflinger/tests/InputReader_test.cpp b/services/inputflinger/tests/InputReader_test.cpp
index 6a06c9e..91d5864 100644
--- a/services/inputflinger/tests/InputReader_test.cpp
+++ b/services/inputflinger/tests/InputReader_test.cpp
@@ -8045,6 +8045,34 @@
     processPositionAndVerify(mapper, x - 1, y, x + 1, y, xExpected, yExpected);
 }
 
+TEST_F(MultiTouchInputMapperTest_SurfaceRange, Viewports_SurfaceRange_Corner) {
+    addConfigurationProperty("touch.deviceType", "touchScreen");
+    prepareDisplay(DISPLAY_ORIENTATION_0);
+    prepareAxes(POSITION);
+    MultiTouchInputMapper& mapper = addMapperAndConfigure<MultiTouchInputMapper>();
+
+    const int32_t x = 0;
+    const int32_t y = 0;
+
+    const int32_t xExpected = x;
+    const int32_t yExpected = y;
+    processPositionAndVerify(mapper, x - 1, y, x, y, xExpected, yExpected);
+
+    clearViewports();
+    prepareDisplay(DISPLAY_ORIENTATION_90);
+    // expect x/y = swap x/y then reverse y.
+    const int32_t xExpected90 = y;
+    const int32_t yExpected90 = DISPLAY_WIDTH - 1;
+    processPositionAndVerify(mapper, x - 1, y, x, y, xExpected90, yExpected90);
+
+    clearViewports();
+    prepareDisplay(DISPLAY_ORIENTATION_270);
+    // expect x/y = swap x/y then reverse x.
+    const int32_t xExpected270 = DISPLAY_HEIGHT - 1;
+    const int32_t yExpected270 = x;
+    processPositionAndVerify(mapper, x - 1, y, x, y, xExpected270, yExpected270);
+}
+
 TEST_F(MultiTouchInputMapperTest, Process_TouchpadCapture) {
     // we need a pointer controller for mouse mode of touchpad (start pointer at 0,0)
     std::shared_ptr<FakePointerController> fakePointerController =