Revert "Revert "Rootless Debug for GLES""
This reverts commit 9f20d92fb3b7ed2a88d2e497ec36d21e9005f497.
Test: cts-tradefed run singleCommand cts -m CtsGpuToolsHostTestCases
Test: Chromium starts up
Test: deqp - EGL, GLES2, GLES3
Bug: 110883880
Change-Id: I728ce502f8df43d5bfb370e6f9d4bd382f8c909d
diff --git a/opengl/libs/Android.bp b/opengl/libs/Android.bp
index fb6a221..583aec9 100644
--- a/opengl/libs/Android.bp
+++ b/opengl/libs/Android.bp
@@ -140,6 +140,7 @@
"EGL/egl_cache.cpp",
"EGL/egl_display.cpp",
"EGL/egl_object.cpp",
+ "EGL/egl_layers.cpp",
"EGL/egl.cpp",
"EGL/eglApi.cpp",
"EGL/egl_platform_entries.cpp",
@@ -150,8 +151,11 @@
"libvndksupport",
"android.hardware.configstore@1.0",
"android.hardware.configstore-utils",
+ "libbase",
"libhidlbase",
"libhidltransport",
+ "libnativebridge",
+ "libnativeloader",
"libutils",
],
static_libs: [
diff --git a/opengl/libs/EGL/egl.cpp b/opengl/libs/EGL/egl.cpp
index 1229bc2..8870d5f 100644
--- a/opengl/libs/EGL/egl.cpp
+++ b/opengl/libs/EGL/egl.cpp
@@ -30,11 +30,10 @@
#include "egl_tls.h"
#include "egl_display.h"
#include "egl_object.h"
+#include "egl_layers.h"
#include "CallStack.h"
#include "Loader.h"
-typedef __eglMustCastToProperFunctionPointerType EGLFuncPointer;
-
// ----------------------------------------------------------------------------
namespace android {
// ----------------------------------------------------------------------------
@@ -196,6 +195,14 @@
cnx->dso = loader.open(cnx);
}
+ // Check to see if any layers are enabled and route functions through them
+ if (cnx->dso) {
+ // Layers can be enabled long after the drivers have been loaded.
+ // They will only be initialized once.
+ LayerLoader& layer_loader(LayerLoader::getInstance());
+ layer_loader.InitLayers(cnx);
+ }
+
return cnx->dso ? EGL_TRUE : EGL_FALSE;
}
diff --git a/opengl/libs/EGL/egl_layers.cpp b/opengl/libs/EGL/egl_layers.cpp
new file mode 100644
index 0000000..6900b8b
--- /dev/null
+++ b/opengl/libs/EGL/egl_layers.cpp
@@ -0,0 +1,433 @@
+/*
+ ** Copyright 2018, The Android Open Source Project
+ **
+ ** Licensed under the Apache License, Version 2.0 (the "License");
+ ** you may not use this file except in compliance with the License.
+ ** You may obtain a copy of the License at
+ **
+ ** http://www.apache.org/licenses/LICENSE-2.0
+ **
+ ** Unless required by applicable law or agreed to in writing, software
+ ** distributed under the License is distributed on an "AS IS" BASIS,
+ ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ ** See the License for the specific language governing permissions and
+ ** limitations under the License.
+ */
+
+#include "egl_layers.h"
+
+#include <EGL/egl.h>
+#include <android-base/file.h>
+#include <android-base/strings.h>
+#include <android/dlext.h>
+#include <cutils/properties.h>
+#include <dlfcn.h>
+#include <graphicsenv/GraphicsEnv.h>
+#include <log/log.h>
+#include <nativebridge/native_bridge.h>
+#include <nativeloader/native_loader.h>
+#include <sys/prctl.h>
+
+namespace android {
+
+// GLES Layers
+//
+// - Layer discovery -
+// 1. Check for debug layer list from GraphicsEnv
+// 2. If none enabled, check system properties
+//
+// - Layer initializing -
+// TODO: ADD DETAIL ABOUT NEW INTERFACES
+// - InitializeLayer (provided by layer, called by loader)
+// - GetLayerProcAddress (provided by layer, called by loader)
+// - getNextLayerProcAddress (provided by loader, called by layer)
+//
+// 1. Walk through defs for egl and each gl version
+// 2. Call GetLayerProcAddress passing the name and the target hook entry point
+// - This tells the layer the next point in the chain it should call
+// 3. Replace the hook with the layer's entry point
+// - All entryoints will be present, anything unsupported by the driver will
+// have gl_unimplemented
+//
+// - Extension layering -
+// Not all functions are known to Android, so libEGL handles extensions.
+// They are looked up by applications using eglGetProcAddress
+// Layers can look them up with getNextLayerProcAddress
+
+const int kFuncCount = sizeof(platform_impl_t) / sizeof(char*) + sizeof(egl_t) / sizeof(char*) +
+ sizeof(gl_hooks_t) / sizeof(char*);
+
+typedef struct FunctionTable {
+ EGLFuncPointer x[kFuncCount];
+ EGLFuncPointer& operator[](int i) { return x[i]; }
+} FunctionTable;
+
+// TODO: Move these to class
+std::unordered_map<std::string, int> func_indices;
+// func_indices.reserve(kFuncCount);
+
+std::unordered_map<int, std::string> func_names;
+// func_names.reserve(kFuncCount);
+
+std::vector<FunctionTable> layer_functions;
+
+const void* getNextLayerProcAddress(void* layer_id, const char* name) {
+ // Use layer_id to find funcs for layer below current
+ // This is the same key provided in InitializeLayer
+ auto next_layer_funcs = reinterpret_cast<FunctionTable*>(layer_id);
+ EGLFuncPointer val;
+
+ if (func_indices.find(name) == func_indices.end()) {
+ // No entry for this function - it is an extension
+ // call down the GPA chain directly to the impl
+ ALOGV("getNextLayerProcAddress servicing %s", name);
+
+ // Look up which GPA we should use
+ int gpaIndex = func_indices["eglGetProcAddress"];
+ EGLFuncPointer gpaNext = (*next_layer_funcs)[gpaIndex];
+
+ ALOGV("Calling down the GPA chain (%llu) for %s", (unsigned long long)gpaNext, name);
+
+ // Call it for the requested function
+ typedef void* (*PFNEGLGETPROCADDRESSPROC)(const char*);
+ PFNEGLGETPROCADDRESSPROC next = reinterpret_cast<PFNEGLGETPROCADDRESSPROC>(gpaNext);
+
+ val = reinterpret_cast<EGLFuncPointer>(next(name));
+ ALOGV("Got back %llu for %s", (unsigned long long)val, name);
+
+ // We should store it now, but to do that, we need to move func_idx to the class so we can
+ // increment it separately
+ // TODO: Move func_idx to class and store the result of GPA
+ return reinterpret_cast<void*>(val);
+ }
+
+ // int index = func_indices[name];
+ // val = (*next_layer_funcs)[index];
+ // return reinterpret_cast<void*>(val);
+ return reinterpret_cast<void*>((*next_layer_funcs)[func_indices[name]]);
+}
+
+void SetupFuncMaps(FunctionTable& functions, char const* const* entries, EGLFuncPointer* curr,
+ int& func_idx) {
+ while (*entries) {
+ const char* name = *entries;
+
+ // Some names overlap, only fill with initial entry
+ // This does mean that some indices will not be used
+ if (func_indices.find(name) == func_indices.end()) {
+ func_names[func_idx] = name;
+ func_indices[name] = func_idx;
+ }
+
+ // Populate layer_functions once with initial value
+ // These values will arrive in priority order, starting with platform entries
+ if (functions[func_idx] == nullptr) {
+ functions[func_idx] = *curr;
+ }
+
+ entries++;
+ curr++;
+ func_idx++;
+ }
+}
+
+LayerLoader& LayerLoader::getInstance() {
+ // This function is mutex protected in egl_init_drivers_locked and eglGetProcAddressImpl
+ static LayerLoader layer_loader;
+
+ if (!layer_loader.layers_loaded_) layer_loader.LoadLayers();
+
+ return layer_loader;
+}
+
+const char kSystemLayerLibraryDir[] = "/data/local/debug/gles";
+
+std::string LayerLoader::GetDebugLayers() {
+ // Layers can be specified at the Java level in GraphicsEnvironemnt
+ // gpu_debug_layers = layer1:layer2:layerN
+ std::string debug_layers = android_getDebugLayers();
+
+ if (debug_layers.empty()) {
+ // Only check system properties if Java settings are empty
+ char prop[PROPERTY_VALUE_MAX];
+ property_get("debug.gles.layers", prop, "");
+ debug_layers = prop;
+ }
+
+ return debug_layers;
+}
+
+EGLFuncPointer LayerLoader::ApplyLayer(layer_setup_func layer_setup, const char* name,
+ EGLFuncPointer next) {
+ // Walk through our list of LayerSetup functions (they will already be in reverse order) to
+ // build up a call chain from the driver
+
+ EGLFuncPointer layer_entry = next;
+
+ layer_entry = layer_setup(name, layer_entry);
+
+ if (next != layer_entry) {
+ ALOGV("We succeeded, replacing hook (%llu) with layer entry (%llu), for %s",
+ (unsigned long long)next, (unsigned long long)layer_entry, name);
+ }
+
+ return layer_entry;
+}
+
+EGLFuncPointer LayerLoader::ApplyLayers(const char* name, EGLFuncPointer next) {
+ if (!layers_loaded_ || layer_setup_.empty()) return next;
+
+ ALOGV("ApplyLayers called for %s with next (%llu), current_layer_ (%i)", name,
+ (unsigned long long)next, current_layer_);
+
+ EGLFuncPointer val = next;
+
+ // Only ApplyLayers for layers that have been setup, not all layers yet
+ for (unsigned i = 0; i < current_layer_; i++) {
+ ALOGV("ApplyLayers: Calling ApplyLayer with i = %i for %s with next (%llu)", i, name,
+ (unsigned long long)next);
+ val = ApplyLayer(layer_setup_[i], name, val);
+ }
+
+ ALOGV("ApplyLayers returning %llu for %s", (unsigned long long)val, name);
+
+ return val;
+}
+
+void LayerLoader::LayerPlatformEntries(layer_setup_func layer_setup, EGLFuncPointer* curr,
+ char const* const* entries) {
+ while (*entries) {
+ char const* name = *entries;
+
+ EGLFuncPointer prev = *curr;
+
+ // Pass the existing entry point into the layer, replace the call with return value
+ *curr = ApplyLayer(layer_setup, name, *curr);
+
+ if (prev != *curr) {
+ ALOGV("LayerPlatformEntries: Replaced (%llu) with platform entry (%llu), for %s",
+ (unsigned long long)prev, (unsigned long long)*curr, name);
+ } else {
+ ALOGV("LayerPlatformEntries: No change(%llu) for %s, which means layer did not "
+ "intercept",
+ (unsigned long long)prev, name);
+ }
+
+ curr++;
+ entries++;
+ }
+}
+
+void LayerLoader::LayerDriverEntries(layer_setup_func layer_setup, EGLFuncPointer* curr,
+ char const* const* entries) {
+ while (*entries) {
+ char const* name = *entries;
+ EGLFuncPointer prev = *curr;
+
+ // Only apply layers to driver entries if not handled by the platform
+ if (FindPlatformImplAddr(name) == nullptr) {
+ // Pass the existing entry point into the layer, replace the call with return value
+ *curr = ApplyLayer(layer_setup, name, *prev);
+
+ if (prev != *curr) {
+ ALOGV("LayerDriverEntries: Replaced (%llu) with platform entry (%llu), for %s",
+ (unsigned long long)prev, (unsigned long long)*curr, name);
+ }
+
+ } else {
+ ALOGV("LayerDriverEntries: Skipped (%llu) for %s", (unsigned long long)prev, name);
+ }
+
+ curr++;
+ entries++;
+ }
+}
+
+bool LayerLoader::Initialized() {
+ return initialized_;
+}
+
+void LayerLoader::InitLayers(egl_connection_t* cnx) {
+ if (!layers_loaded_) return;
+
+ if (initialized_) return;
+
+ if (layer_setup_.empty()) {
+ initialized_ = true;
+ return;
+ }
+
+ // Include the driver in layer_functions
+ layer_functions.resize(layer_setup_.size() + 1);
+
+ // Walk through the initial lists and create layer_functions[0]
+ int func_idx = 0;
+ char const* const* entries;
+ EGLFuncPointer* curr;
+
+ entries = platform_names;
+ curr = reinterpret_cast<EGLFuncPointer*>(&cnx->platform);
+ SetupFuncMaps(layer_functions[0], entries, curr, func_idx);
+ ALOGV("InitLayers: func_idx after platform_names: %i", func_idx);
+
+ entries = egl_names;
+ curr = reinterpret_cast<EGLFuncPointer*>(&cnx->egl);
+ SetupFuncMaps(layer_functions[0], entries, curr, func_idx);
+ ALOGV("InitLayers: func_idx after egl_names: %i", func_idx);
+
+ entries = gl_names;
+ curr = reinterpret_cast<EGLFuncPointer*>(&cnx->hooks[egl_connection_t::GLESv2_INDEX]->gl);
+ SetupFuncMaps(layer_functions[0], entries, curr, func_idx);
+ ALOGV("InitLayers: func_idx after gl_names: %i", func_idx);
+
+ // Walk through each layer's entry points per API, starting just above the driver
+ for (current_layer_ = 0; current_layer_ < layer_setup_.size(); current_layer_++) {
+ // Init the layer with a key that points to layer just below it
+ layer_init_[current_layer_](reinterpret_cast<void*>(&layer_functions[current_layer_]),
+ reinterpret_cast<PFNEGLGETNEXTLAYERPROCADDRESSPROC>(
+ getNextLayerProcAddress));
+
+ // Check functions implemented by the platform
+ func_idx = 0;
+ entries = platform_names;
+ curr = reinterpret_cast<EGLFuncPointer*>(&cnx->platform);
+ LayerPlatformEntries(layer_setup_[current_layer_], curr, entries);
+
+ // Populate next function table after layers have been applied
+ SetupFuncMaps(layer_functions[current_layer_ + 1], entries, curr, func_idx);
+
+ // EGL
+ entries = egl_names;
+ curr = reinterpret_cast<EGLFuncPointer*>(&cnx->egl);
+ LayerDriverEntries(layer_setup_[current_layer_], curr, entries);
+
+ // Populate next function table after layers have been applied
+ SetupFuncMaps(layer_functions[current_layer_ + 1], entries, curr, func_idx);
+
+ // GLES 2+
+ // NOTE: We route calls to GLESv2 hooks, not GLESv1, so layering does not support GLES 1.x
+ // If it were added in the future, a different layer initialization model would be needed,
+ // that defers loading GLES entrypoints until after eglMakeCurrent, so two phase
+ // initialization.
+ entries = gl_names;
+ curr = reinterpret_cast<EGLFuncPointer*>(&cnx->hooks[egl_connection_t::GLESv2_INDEX]->gl);
+ LayerDriverEntries(layer_setup_[current_layer_], curr, entries);
+
+ // Populate next function table after layers have been applied
+ SetupFuncMaps(layer_functions[current_layer_ + 1], entries, curr, func_idx);
+ }
+
+ // We only want to apply layers once
+ initialized_ = true;
+}
+
+void LayerLoader::LoadLayers() {
+ std::string debug_layers = GetDebugLayers();
+
+ // If no layers are specified, we're done
+ if (debug_layers.empty()) return;
+
+ // Only enable the system search path for non-user builds
+ std::string system_path;
+ if (property_get_bool("ro.debuggable", false) && prctl(PR_GET_DUMPABLE, 0, 0, 0, 0)) {
+ system_path = kSystemLayerLibraryDir;
+ }
+
+ ALOGI("Debug layer list: %s", debug_layers.c_str());
+ std::vector<std::string> layers = android::base::Split(debug_layers, ":");
+
+ // Load the layers in reverse order so we start with the driver's entrypoint and work our way up
+ for (int32_t i = layers.size() - 1; i >= 0; i--) {
+ // Check each layer path for the layer
+ std::vector<std::string> paths = android::base::Split(android_getLayerPaths(), ":");
+
+ if (!system_path.empty()) {
+ // Prepend the system paths so they override other layers
+ auto it = paths.begin();
+ paths.insert(it, system_path);
+ }
+
+ bool layer_found = false;
+ for (uint32_t j = 0; j < paths.size() && !layer_found; j++) {
+ std::string layer;
+
+ ALOGI("Searching %s for GLES layers", paths[j].c_str());
+
+ // Realpath will return null for non-existent files
+ android::base::Realpath(paths[j] + "/" + layers[i], &layer);
+
+ if (!layer.empty()) {
+ layer_found = true;
+ ALOGI("GLES layer found: %s", layer.c_str());
+
+ // Load the layer
+ //
+ // TODO: This code is common with Vulkan loader, refactor
+ //
+ // Libraries in the system layer library dir can't be loaded into
+ // the application namespace. That causes compatibility problems, since
+ // any symbol dependencies will be resolved by system libraries. They
+ // can't safely use libc++_shared, for example. Which is one reason
+ // (among several) we only allow them in non-user builds.
+ void* handle = nullptr;
+ auto app_namespace = android::GraphicsEnv::getInstance().getAppNamespace();
+ if (app_namespace && !android::base::StartsWith(layer, kSystemLayerLibraryDir)) {
+ bool native_bridge = false;
+ std::string error_message;
+ handle = OpenNativeLibrary(app_namespace, layer.c_str(), &native_bridge,
+ &error_message);
+ if (!handle) {
+ ALOGE("Failed to load layer %s with error: %s", layer.c_str(),
+ error_message.c_str());
+ return;
+ }
+
+ } else {
+ handle = dlopen(layer.c_str(), RTLD_NOW | RTLD_LOCAL);
+ }
+
+ if (handle) {
+ ALOGV("Loaded layer handle (%llu) for layer %s", (unsigned long long)handle,
+ layers[i].c_str());
+ } else {
+ // If the layer is found but can't be loaded, try setenforce 0
+ const char* dlsym_error = dlerror();
+ ALOGE("Failed to load layer %s with error: %s", layer.c_str(), dlsym_error);
+ return;
+ }
+
+ // Find the layer's Initialize function
+ std::string init_func = "InitializeLayer";
+ ALOGV("Looking for entrypoint %s", init_func.c_str());
+
+ layer_init_func LayerInit =
+ reinterpret_cast<layer_init_func>(dlsym(handle, init_func.c_str()));
+ if (LayerInit) {
+ ALOGV("Found %s for layer %s", init_func.c_str(), layer.c_str());
+ layer_init_.push_back(LayerInit);
+ } else {
+ ALOGE("Failed to dlsym %s for layer %s", init_func.c_str(), layer.c_str());
+ return;
+ }
+
+ // Find the layer's setup function
+ std::string setup_func = "GetLayerProcAddress";
+ ALOGV("Looking for entrypoint %s", setup_func.c_str());
+
+ layer_setup_func LayerSetup =
+ reinterpret_cast<layer_setup_func>(dlsym(handle, setup_func.c_str()));
+ if (LayerSetup) {
+ ALOGV("Found %s for layer %s", setup_func.c_str(), layer.c_str());
+ layer_setup_.push_back(LayerSetup);
+ } else {
+ ALOGE("Failed to dlsym %s for layer %s", setup_func.c_str(), layer.c_str());
+ return;
+ }
+ }
+ }
+ }
+ // Track this so we only attempt to load these once
+ layers_loaded_ = true;
+}
+
+} // namespace android
diff --git a/opengl/libs/EGL/egl_layers.h b/opengl/libs/EGL/egl_layers.h
new file mode 100644
index 0000000..e401b44
--- /dev/null
+++ b/opengl/libs/EGL/egl_layers.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_EGL_LAYERS_H
+#define ANDROID_EGL_LAYERS_H
+
+#include <string>
+#include <unordered_map>
+#include <vector>
+
+#include <EGL/egldefs.h>
+
+#include "egl_platform_entries.h"
+
+typedef __eglMustCastToProperFunctionPointerType EGLFuncPointer;
+
+namespace android {
+
+class LayerLoader {
+public:
+ static LayerLoader& getInstance();
+ ~LayerLoader(){};
+
+ typedef void* (*PFNEGLGETNEXTLAYERPROCADDRESSPROC)(void*, const char*);
+ typedef EGLFuncPointer (*layer_init_func)(
+ const void* layer_id, PFNEGLGETNEXTLAYERPROCADDRESSPROC get_next_layer_proc_address);
+ typedef EGLFuncPointer (*layer_setup_func)(const char* name, EGLFuncPointer next);
+
+ void LoadLayers();
+ void InitLayers(egl_connection_t*);
+ void LayerPlatformEntries(layer_setup_func layer_setup, EGLFuncPointer*, char const* const*);
+ void LayerDriverEntries(layer_setup_func layer_setup, EGLFuncPointer*, char const* const*);
+ bool Initialized();
+ std::string GetDebugLayers();
+
+ EGLFuncPointer GetGpaNext(unsigned i);
+ EGLFuncPointer ApplyLayer(layer_setup_func layer_setup, const char* name, EGLFuncPointer next);
+ EGLFuncPointer ApplyLayers(const char* name, EGLFuncPointer next);
+
+ std::vector<layer_init_func> layer_init_;
+ std::vector<layer_setup_func> layer_setup_;
+
+private:
+ LayerLoader() : layers_loaded_(false), initialized_(false), current_layer_(0){};
+ bool layers_loaded_;
+ bool initialized_;
+ unsigned current_layer_;
+};
+
+}; // namespace android
+
+#endif // ANDROID_EGL_LAYERS_H
diff --git a/opengl/libs/EGL/egl_platform_entries.cpp b/opengl/libs/EGL/egl_platform_entries.cpp
index 296ee44..0d69a65 100644
--- a/opengl/libs/EGL/egl_platform_entries.cpp
+++ b/opengl/libs/EGL/egl_platform_entries.cpp
@@ -30,6 +30,8 @@
#include <EGL/eglext_angle.h>
#include <android/hardware_buffer.h>
+#include <android-base/strings.h>
+#include <graphicsenv/GraphicsEnv.h>
#include <private/android/AHardwareBufferHelpers.h>
#include <cutils/compiler.h>
@@ -47,6 +49,7 @@
#include "egl_display.h"
#include "egl_object.h"
+#include "egl_layers.h"
#include "egl_tls.h"
#include "egl_trace.h"
@@ -1158,54 +1161,71 @@
// this protects accesses to sGLExtentionMap and sGLExtentionSlot
pthread_mutex_lock(&sExtensionMapMutex);
- /*
- * Since eglGetProcAddress() is not associated to anything, it needs
- * to return a function pointer that "works" regardless of what
- * the current context is.
- *
- * For this reason, we return a "forwarder", a small stub that takes
- * care of calling the function associated with the context
- * currently bound.
- *
- * We first look for extensions we've already resolved, if we're seeing
- * this extension for the first time, we go through all our
- * implementations and call eglGetProcAddress() and record the
- * result in the appropriate implementation hooks and return the
- * address of the forwarder corresponding to that hook set.
- *
- */
+ /*
+ * Since eglGetProcAddress() is not associated to anything, it needs
+ * to return a function pointer that "works" regardless of what
+ * the current context is.
+ *
+ * For this reason, we return a "forwarder", a small stub that takes
+ * care of calling the function associated with the context
+ * currently bound.
+ *
+ * We first look for extensions we've already resolved, if we're seeing
+ * this extension for the first time, we go through all our
+ * implementations and call eglGetProcAddress() and record the
+ * result in the appropriate implementation hooks and return the
+ * address of the forwarder corresponding to that hook set.
+ *
+ */
- const std::string name(procname);
+ const std::string name(procname);
auto& extentionMap = sGLExtentionMap;
auto pos = extentionMap.find(name);
- addr = (pos != extentionMap.end()) ? pos->second : nullptr;
- const int slot = sGLExtentionSlot;
+ addr = (pos != extentionMap.end()) ? pos->second : nullptr;
+ const int slot = sGLExtentionSlot;
- ALOGE_IF(slot >= MAX_NUMBER_OF_GL_EXTENSIONS,
- "no more slots for eglGetProcAddress(\"%s\")",
- procname);
+ ALOGE_IF(slot >= MAX_NUMBER_OF_GL_EXTENSIONS,
+ "no more slots for eglGetProcAddress(\"%s\")",
+ procname);
- if (!addr && (slot < MAX_NUMBER_OF_GL_EXTENSIONS)) {
- bool found = false;
+ egl_connection_t* const cnx = &gEGLImpl;
+ LayerLoader& layer_loader(LayerLoader::getInstance());
- egl_connection_t* const cnx = &gEGLImpl;
- if (cnx->dso && cnx->egl.eglGetProcAddress) {
- // Extensions are independent of the bound context
- addr =
- cnx->hooks[egl_connection_t::GLESv1_INDEX]->ext.extensions[slot] =
- cnx->hooks[egl_connection_t::GLESv2_INDEX]->ext.extensions[slot] =
- cnx->egl.eglGetProcAddress(procname);
- if (addr) found = true;
- }
+ if (!addr && (slot < MAX_NUMBER_OF_GL_EXTENSIONS)) {
- if (found) {
- addr = gExtensionForwarders[slot];
+ if (cnx->dso && cnx->egl.eglGetProcAddress) {
+
+ // Extensions are independent of the bound context
+ addr = cnx->egl.eglGetProcAddress(procname);
+ if (addr) {
+
+ // purposefully track the bottom of the stack in extensionMap
extentionMap[name] = addr;
+
+ // Apply layers
+ addr = layer_loader.ApplyLayers(procname, addr);
+
+ // Track the top most entry point
+ cnx->hooks[egl_connection_t::GLESv1_INDEX]->ext.extensions[slot] =
+ cnx->hooks[egl_connection_t::GLESv2_INDEX]->ext.extensions[slot] = addr;
+ addr = gExtensionForwarders[slot];
sGLExtentionSlot++;
}
}
+ } else if (slot < MAX_NUMBER_OF_GL_EXTENSIONS) {
+
+ // We've seen this func before, but we tracked the bottom, so re-apply layers
+ // More layers might have been enabled
+ addr = layer_loader.ApplyLayers(procname, addr);
+
+ // Track the top most entry point
+ cnx->hooks[egl_connection_t::GLESv1_INDEX]->ext.extensions[slot] =
+ cnx->hooks[egl_connection_t::GLESv2_INDEX]->ext.extensions[slot] = addr;
+ addr = gExtensionForwarders[slot];
+ }
+
pthread_mutex_unlock(&sExtensionMapMutex);
return addr;
}