diff --git a/services/surfaceflinger/tests/LayerTransactionTest.h b/services/surfaceflinger/tests/LayerTransactionTest.h
index da71dad..b87c734 100644
--- a/services/surfaceflinger/tests/LayerTransactionTest.h
+++ b/services/surfaceflinger/tests/LayerTransactionTest.h
@@ -123,7 +123,7 @@
     }
 
     virtual void fillBufferQueueLayerColor(const sp<SurfaceControl>& layer, const Color& color,
-                                           int32_t bufferWidth, int32_t bufferHeight) {
+                                           uint32_t bufferWidth, uint32_t bufferHeight) {
         ANativeWindow_Buffer buffer;
         ASSERT_NO_FATAL_FAILURE(buffer = getBufferQueueLayerBuffer(layer));
         TransactionUtils::fillANativeWindowBufferColor(buffer,
@@ -145,7 +145,7 @@
     }
 
     void fillLayerColor(uint32_t mLayerType, const sp<SurfaceControl>& layer, const Color& color,
-                        int32_t bufferWidth, int32_t bufferHeight) {
+                        uint32_t bufferWidth, uint32_t bufferHeight) {
         switch (mLayerType) {
             case ISurfaceComposerClient::eFXSurfaceBufferQueue:
                 fillBufferQueueLayerColor(layer, color, bufferWidth, bufferHeight);
diff --git a/services/surfaceflinger/tests/SetFrameRate_test.cpp b/services/surfaceflinger/tests/SetFrameRate_test.cpp
index 02ba9e2..d1bed0c 100644
--- a/services/surfaceflinger/tests/SetFrameRate_test.cpp
+++ b/services/surfaceflinger/tests/SetFrameRate_test.cpp
@@ -14,10 +14,6 @@
  * limitations under the License.
  */
 
-// TODO(b/129481165): remove the #pragma below and fix conversion issues
-#pragma clang diagnostic push
-#pragma clang diagnostic ignored "-Wconversion"
-
 #include <system/window.h>
 
 #include <thread>
@@ -50,8 +46,8 @@
         }
     }
 
-    const int mLayerWidth = 32;
-    const int mLayerHeight = 32;
+    const uint32_t mLayerWidth = 32;
+    const uint32_t mLayerHeight = 32;
     sp<SurfaceControl> mLayer;
     uint32_t mLayerType;
 };
@@ -59,26 +55,27 @@
 TEST_F(SetFrameRateTest, BufferQueueLayerSetFrameRate) {
     CreateLayer(ISurfaceComposerClient::eFXSurfaceBufferQueue);
     native_window_set_frame_rate(mLayer->getSurface().get(), 100.f,
-                                 ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT);
+                                 ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT,
+                                 /* shouldBeSeamless */ true);
     ASSERT_NO_FATAL_FAILURE(PostBuffers(Color::RED));
     Transaction()
-            .setFrameRate(mLayer, 200.f, ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT)
+            .setFrameRate(mLayer, 200.f, ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT,
+                          /* shouldBeSeamless */ true)
             .apply();
     ASSERT_NO_FATAL_FAILURE(PostBuffers(Color::RED));
     native_window_set_frame_rate(mLayer->getSurface().get(), 300.f,
-                                 ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT);
+                                 ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT,
+                                 /* shouldBeSeamless */ true);
     ASSERT_NO_FATAL_FAILURE(PostBuffers(Color::RED));
 }
 
 TEST_F(SetFrameRateTest, BufferStateLayerSetFrameRate) {
     CreateLayer(ISurfaceComposerClient::eFXSurfaceBufferState);
     Transaction()
-            .setFrameRate(mLayer, 400.f, ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT)
+            .setFrameRate(mLayer, 400.f, ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT,
+                          /* shouldBeSeamless */ true)
             .apply();
     ASSERT_NO_FATAL_FAILURE(PostBuffers(Color::GREEN));
 }
 
 } // namespace android
-
-// TODO(b/129481165): remove the #pragma below and fix conversion issues
-#pragma clang diagnostic pop // ignored "-Wconversion"
\ No newline at end of file
diff --git a/services/surfaceflinger/tests/TransactionTestHarnesses.h b/services/surfaceflinger/tests/TransactionTestHarnesses.h
index 01badf4..a361b1e 100644
--- a/services/surfaceflinger/tests/TransactionTestHarnesses.h
+++ b/services/surfaceflinger/tests/TransactionTestHarnesses.h
@@ -98,14 +98,14 @@
                                                  outTransformHint, format);
     }
 
-    void fillLayerColor(const sp<SurfaceControl>& layer, const Color& color, int32_t bufferWidth,
-                        int32_t bufferHeight) {
+    void fillLayerColor(const sp<SurfaceControl>& layer, const Color& color, uint32_t bufferWidth,
+                        uint32_t bufferHeight) {
         ASSERT_NO_FATAL_FAILURE(LayerTransactionTest::fillLayerColor(mLayerType, layer, color,
                                                                      bufferWidth, bufferHeight));
     }
 
-    void fillLayerQuadrant(const sp<SurfaceControl>& layer, int32_t bufferWidth,
-                           int32_t bufferHeight, const Color& topLeft, const Color& topRight,
+    void fillLayerQuadrant(const sp<SurfaceControl>& layer, uint32_t bufferWidth,
+                           uint32_t bufferHeight, const Color& topLeft, const Color& topRight,
                            const Color& bottomLeft, const Color& bottomRight) {
         ASSERT_NO_FATAL_FAILURE(LayerTransactionTest::fillLayerQuadrant(mLayerType, layer,
                                                                         bufferWidth, bufferHeight,
diff --git a/services/surfaceflinger/tests/unittests/LayerHistoryTestV2.cpp b/services/surfaceflinger/tests/unittests/LayerHistoryTestV2.cpp
index cb376cd..3b50321 100644
--- a/services/surfaceflinger/tests/unittests/LayerHistoryTestV2.cpp
+++ b/services/surfaceflinger/tests/unittests/LayerHistoryTestV2.cpp
@@ -78,7 +78,7 @@
         for (auto& [weak, info] : history().mLayerInfos) {
             if (auto strong = weak.promote(); strong && strong.get() == layer) {
                 info->setDefaultLayerVote(vote);
-                info->setLayerVote(vote, 0);
+                info->setLayerVote({vote, 0, false});
                 return;
             }
         }
diff --git a/services/surfaceflinger/tests/unittests/RefreshRateConfigsTest.cpp b/services/surfaceflinger/tests/unittests/RefreshRateConfigsTest.cpp
index 4762fd4..df76110 100644
--- a/services/surfaceflinger/tests/unittests/RefreshRateConfigsTest.cpp
+++ b/services/surfaceflinger/tests/unittests/RefreshRateConfigsTest.cpp
@@ -57,6 +57,8 @@
     static inline const HwcConfigIndexType HWC_CONFIG_ID_72 = HwcConfigIndexType(2);
     static inline const HwcConfigIndexType HWC_CONFIG_ID_120 = HwcConfigIndexType(3);
     static inline const HwcConfigIndexType HWC_CONFIG_ID_30 = HwcConfigIndexType(4);
+    static inline const HwcConfigIndexType HWC_CONFIG_ID_25 = HwcConfigIndexType(5);
+    static inline const HwcConfigIndexType HWC_CONFIG_ID_50 = HwcConfigIndexType(6);
 
     // Test configs
     std::shared_ptr<const HWC2::Display::Config> mConfig60 =
@@ -77,8 +79,16 @@
             createConfig(HWC_CONFIG_ID_120, 1, static_cast<int64_t>(1e9f / 120));
     std::shared_ptr<const HWC2::Display::Config> mConfig30 =
             createConfig(HWC_CONFIG_ID_30, 0, static_cast<int64_t>(1e9f / 30));
+    std::shared_ptr<const HWC2::Display::Config> mConfig30DifferentGroup =
+            createConfig(HWC_CONFIG_ID_30, 1, static_cast<int64_t>(1e9f / 30));
+    std::shared_ptr<const HWC2::Display::Config> mConfig25DifferentGroup =
+            createConfig(HWC_CONFIG_ID_25, 1, static_cast<int64_t>(1e9f / 25));
+    std::shared_ptr<const HWC2::Display::Config> mConfig50 =
+            createConfig(HWC_CONFIG_ID_50, 0, static_cast<int64_t>(1e9f / 50));
 
     // Test device configurations
+    // The positions of the configs in the arrays below MUST match their IDs. For example,
+    // the first config should always be 60Hz, the second 90Hz etc.
     std::vector<std::shared_ptr<const HWC2::Display::Config>> m60OnlyConfigDevice = {mConfig60};
     std::vector<std::shared_ptr<const HWC2::Display::Config>> m60_90Device = {mConfig60, mConfig90};
     std::vector<std::shared_ptr<const HWC2::Display::Config>> m60_90DeviceWithDifferentGroups =
@@ -104,6 +114,14 @@
             {mConfig60, mConfig90, mConfig72, mConfig120DifferentGroup, mConfig30};
     std::vector<std::shared_ptr<const HWC2::Display::Config>> m30_60_90Device =
             {mConfig60, mConfig90, mConfig72DifferentGroup, mConfig120DifferentGroup, mConfig30};
+    std::vector<std::shared_ptr<const HWC2::Display::Config>> m25_30_50_60Device =
+            {mConfig60,
+             mConfig90,
+             mConfig72DifferentGroup,
+             mConfig120DifferentGroup,
+             mConfig30DifferentGroup,
+             mConfig25DifferentGroup,
+             mConfig50};
 
     // Expected RefreshRate objects
     RefreshRate mExpected60Config = {HWC_CONFIG_ID_60, mConfig60, "60fps", 60,
@@ -292,8 +310,8 @@
                                                  /*currentConfigId=*/HWC_CONFIG_ID_60);
 
     const auto makeLayerRequirements = [](float refreshRate) -> std::vector<LayerRequirement> {
-        return {{"testLayer", LayerVoteType::Heuristic, refreshRate, /*weight*/ 1.0f,
-                 /*focused*/ false}};
+        return {{"testLayer", LayerVoteType::Heuristic, refreshRate, /*shouldBeSeamless*/ true,
+                 /*weight*/ 1.0f, /*focused*/ false}};
     };
 
     EXPECT_EQ(mExpected90Config,
@@ -1245,7 +1263,9 @@
     auto& layer = layers[0];
     layer.vote = LayerVoteType::ExplicitDefault;
     layer.desiredRefreshRate = 90.0f;
+    layer.shouldBeSeamless = false;
     layer.name = "90Hz ExplicitDefault";
+    layer.focused = true;
 
     ASSERT_EQ(HWC_CONFIG_ID_60,
               refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
@@ -1258,6 +1278,104 @@
     ASSERT_EQ(HWC_CONFIG_ID_90,
               refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
                       .getConfigId());
+
+    // Verify that we won't change the group if seamless switch is required.
+    layer.shouldBeSeamless = true;
+    ASSERT_EQ(HWC_CONFIG_ID_60,
+              refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
+                      .getConfigId());
+
+    // At this point the default config in the DisplayManager policy with be 60Hz.
+    // Verify that if the current config is in another group and there are no layers with
+    // shouldBeSeamless=false we'll go back to the default group.
+    refreshRateConfigs->setCurrentConfigId(HWC_CONFIG_ID_90);
+    layer.desiredRefreshRate = 60.0f;
+    layer.name = "60Hz ExplicitDefault";
+    layer.shouldBeSeamless = true;
+    ASSERT_EQ(HWC_CONFIG_ID_60,
+              refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
+                      .getConfigId());
+
+    // If there's a layer with shouldBeSeamless=false, another layer with shouldBeSeamless=true
+    // can't change the config group.
+    refreshRateConfigs->setCurrentConfigId(HWC_CONFIG_ID_90);
+    auto layer2 = LayerRequirement{.weight = 0.5f};
+    layer2.vote = LayerVoteType::ExplicitDefault;
+    layer2.desiredRefreshRate = 90.0f;
+    layer2.name = "90Hz ExplicitDefault";
+    layer2.shouldBeSeamless = false;
+    layer2.focused = false;
+    layers.push_back(layer2);
+    ASSERT_EQ(HWC_CONFIG_ID_90,
+              refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
+                      .getConfigId());
+}
+
+TEST_F(RefreshRateConfigsTest, nonSeamlessVotePrefersSeamlessSwitches) {
+    auto refreshRateConfigs =
+            std::make_unique<RefreshRateConfigs>(m30_60Device,
+                                                 /*currentConfigId=*/HWC_CONFIG_ID_60);
+
+    // Allow group switching.
+    RefreshRateConfigs::Policy policy;
+    policy.defaultConfig = refreshRateConfigs->getCurrentPolicy().defaultConfig;
+    policy.allowGroupSwitching = true;
+    ASSERT_GE(refreshRateConfigs->setDisplayManagerPolicy(policy), 0);
+
+    auto layers = std::vector<LayerRequirement>{LayerRequirement{.weight = 1.0f}};
+    auto& layer = layers[0];
+    layer.vote = LayerVoteType::ExplicitExactOrMultiple;
+    layer.desiredRefreshRate = 60.0f;
+    layer.shouldBeSeamless = false;
+    layer.name = "60Hz ExplicitExactOrMultiple";
+    layer.focused = true;
+
+    ASSERT_EQ(HWC_CONFIG_ID_60,
+              refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
+                      .getConfigId());
+
+    refreshRateConfigs->setCurrentConfigId(HWC_CONFIG_ID_120);
+    ASSERT_EQ(HWC_CONFIG_ID_120,
+              refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
+                      .getConfigId());
+}
+
+TEST_F(RefreshRateConfigsTest, nonSeamlessExactAndSeamlessMultipleLayers) {
+    auto refreshRateConfigs =
+            std::make_unique<RefreshRateConfigs>(m25_30_50_60Device,
+                                                 /*currentConfigId=*/HWC_CONFIG_ID_60);
+
+    // Allow group switching.
+    RefreshRateConfigs::Policy policy;
+    policy.defaultConfig = refreshRateConfigs->getCurrentPolicy().defaultConfig;
+    policy.allowGroupSwitching = true;
+    ASSERT_GE(refreshRateConfigs->setDisplayManagerPolicy(policy), 0);
+
+    auto layers = std::vector<
+            LayerRequirement>{LayerRequirement{.name = "60Hz ExplicitDefault",
+                                               .vote = LayerVoteType::ExplicitDefault,
+                                               .desiredRefreshRate = 60.0f,
+                                               .shouldBeSeamless = false,
+                                               .weight = 0.5f,
+                                               .focused = false},
+                              LayerRequirement{.name = "25Hz ExplicitExactOrMultiple",
+                                               .vote = LayerVoteType::ExplicitExactOrMultiple,
+                                               .desiredRefreshRate = 25.0f,
+                                               .shouldBeSeamless = true,
+                                               .weight = 1.0f,
+                                               .focused = true}};
+    auto& seamedLayer = layers[0];
+
+    ASSERT_EQ(HWC_CONFIG_ID_50,
+              refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
+                      .getConfigId());
+
+    seamedLayer.name = "30Hz ExplicitDefault", seamedLayer.desiredRefreshRate = 30.0f;
+    refreshRateConfigs->setCurrentConfigId(HWC_CONFIG_ID_30);
+
+    ASSERT_EQ(HWC_CONFIG_ID_25,
+              refreshRateConfigs->getBestRefreshRate(layers, {.touch = false, .idle = false})
+                      .getConfigId());
 }
 
 TEST_F(RefreshRateConfigsTest, primaryVsAppRequestPolicy) {
diff --git a/services/surfaceflinger/tests/unittests/RefreshRateStatsTest.cpp b/services/surfaceflinger/tests/unittests/RefreshRateStatsTest.cpp
index de66f8f..d0bb9e2 100644
--- a/services/surfaceflinger/tests/unittests/RefreshRateStatsTest.cpp
+++ b/services/surfaceflinger/tests/unittests/RefreshRateStatsTest.cpp
@@ -108,7 +108,7 @@
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_LT(screenOff, times["ScreenOff"]);
-    EXPECT_EQ(0u, times.count("90fps"));
+    EXPECT_EQ(0u, times.count("90.00fps"));
 
     mRefreshRateStats->setConfigMode(CONFIG_ID_0);
     mRefreshRateStats->setPowerMode(PowerMode::ON);
@@ -116,15 +116,15 @@
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_EQ(screenOff, times["ScreenOff"]);
-    ASSERT_EQ(1u, times.count("90fps"));
-    EXPECT_LT(0, times["90fps"]);
+    ASSERT_EQ(1u, times.count("90.00fps"));
+    EXPECT_LT(0, times["90.00fps"]);
 
     mRefreshRateStats->setPowerMode(PowerMode::DOZE);
-    int ninety = mRefreshRateStats->getTotalTimes()["90fps"];
+    int ninety = mRefreshRateStats->getTotalTimes()["90.00fps"];
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_LT(screenOff, times["ScreenOff"]);
-    EXPECT_EQ(ninety, times["90fps"]);
+    EXPECT_EQ(ninety, times["90.00fps"]);
 
     mRefreshRateStats->setConfigMode(CONFIG_ID_0);
     screenOff = mRefreshRateStats->getTotalTimes()["ScreenOff"];
@@ -133,7 +133,7 @@
     // Because the power mode is not PowerMode::ON, switching the config
     // does not update refresh rates that come from the config.
     EXPECT_LT(screenOff, times["ScreenOff"]);
-    EXPECT_EQ(ninety, times["90fps"]);
+    EXPECT_EQ(ninety, times["90.00fps"]);
 }
 
 TEST_F(RefreshRateStatsTest, twoConfigsTest) {
@@ -163,53 +163,53 @@
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_EQ(screenOff, times["ScreenOff"]);
-    ASSERT_EQ(1u, times.count("90fps"));
-    EXPECT_LT(0, times["90fps"]);
+    ASSERT_EQ(1u, times.count("90.00fps"));
+    EXPECT_LT(0, times["90.00fps"]);
 
     // When power mode is normal, time for configs updates.
     mRefreshRateStats->setConfigMode(CONFIG_ID_1);
-    int ninety = mRefreshRateStats->getTotalTimes()["90fps"];
+    int ninety = mRefreshRateStats->getTotalTimes()["90.00fps"];
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_EQ(screenOff, times["ScreenOff"]);
-    EXPECT_EQ(ninety, times["90fps"]);
-    ASSERT_EQ(1u, times.count("60fps"));
-    EXPECT_LT(0, times["60fps"]);
+    EXPECT_EQ(ninety, times["90.00fps"]);
+    ASSERT_EQ(1u, times.count("60.00fps"));
+    EXPECT_LT(0, times["60.00fps"]);
 
     mRefreshRateStats->setConfigMode(CONFIG_ID_0);
-    int sixty = mRefreshRateStats->getTotalTimes()["60fps"];
+    int sixty = mRefreshRateStats->getTotalTimes()["60.00fps"];
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_EQ(screenOff, times["ScreenOff"]);
-    EXPECT_LT(ninety, times["90fps"]);
-    EXPECT_EQ(sixty, times["60fps"]);
+    EXPECT_LT(ninety, times["90.00fps"]);
+    EXPECT_EQ(sixty, times["60.00fps"]);
 
     mRefreshRateStats->setConfigMode(CONFIG_ID_1);
-    ninety = mRefreshRateStats->getTotalTimes()["90fps"];
+    ninety = mRefreshRateStats->getTotalTimes()["90.00fps"];
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_EQ(screenOff, times["ScreenOff"]);
-    EXPECT_EQ(ninety, times["90fps"]);
-    EXPECT_LT(sixty, times["60fps"]);
+    EXPECT_EQ(ninety, times["90.00fps"]);
+    EXPECT_LT(sixty, times["60.00fps"]);
 
     // Because the power mode is not PowerMode::ON, switching the config
     // does not update refresh rates that come from the config.
     mRefreshRateStats->setPowerMode(PowerMode::DOZE);
     mRefreshRateStats->setConfigMode(CONFIG_ID_0);
-    sixty = mRefreshRateStats->getTotalTimes()["60fps"];
+    sixty = mRefreshRateStats->getTotalTimes()["60.00fps"];
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_LT(screenOff, times["ScreenOff"]);
-    EXPECT_EQ(ninety, times["90fps"]);
-    EXPECT_EQ(sixty, times["60fps"]);
+    EXPECT_EQ(ninety, times["90.00fps"]);
+    EXPECT_EQ(sixty, times["60.00fps"]);
 
     mRefreshRateStats->setConfigMode(CONFIG_ID_1);
     screenOff = mRefreshRateStats->getTotalTimes()["ScreenOff"];
     std::this_thread::sleep_for(std::chrono::milliseconds(2));
     times = mRefreshRateStats->getTotalTimes();
     EXPECT_LT(screenOff, times["ScreenOff"]);
-    EXPECT_EQ(ninety, times["90fps"]);
-    EXPECT_EQ(sixty, times["60fps"]);
+    EXPECT_EQ(ninety, times["90.00fps"]);
+    EXPECT_EQ(sixty, times["60.00fps"]);
 }
 } // namespace
 } // namespace scheduler