diff --git a/include/ui/InputReader.h b/include/ui/InputReader.h
index 71c6c51..56d2765 100644
--- a/include/ui/InputReader.h
+++ b/include/ui/InputReader.h
@@ -480,10 +480,6 @@
         inline void clear() {
             fields = 0;
         }
-
-        inline bool isDirty() {
-            return fields != 0;
-        }
     } mAccumulator;
 
     float mXScale;
@@ -702,7 +698,7 @@
         } historyData[AVERAGING_HISTORY_SIZE];
     } mAveragingTouchFilter;
 
-    struct JumpTouchFilterState {
+    struct JumpyTouchFilterState {
         uint32_t jumpyPointsDropped;
     } mJumpyTouchFilter;
 
@@ -765,10 +761,6 @@
         inline void clear() {
             fields = 0;
         }
-
-        inline bool isDirty() {
-            return fields != 0;
-        }
     } mAccumulator;
 
     bool mDown;
@@ -804,7 +796,8 @@
             FIELD_ABS_MT_WIDTH_MAJOR = 16,
             FIELD_ABS_MT_WIDTH_MINOR = 32,
             FIELD_ABS_MT_ORIENTATION = 64,
-            FIELD_ABS_MT_TRACKING_ID = 128
+            FIELD_ABS_MT_TRACKING_ID = 128,
+            FIELD_ABS_MT_PRESSURE = 256,
         };
 
         uint32_t pointerCount;
@@ -819,6 +812,7 @@
             int32_t absMTWidthMinor;
             int32_t absMTOrientation;
             int32_t absMTTrackingId;
+            int32_t absMTPressure;
 
             inline void clear() {
                 fields = 0;
@@ -829,10 +823,6 @@
             pointerCount = 0;
             pointers[0].clear();
         }
-
-        inline bool isDirty() {
-            return pointerCount != 0;
-        }
     } mAccumulator;
 
     void initialize();
diff --git a/libs/ui/InputReader.cpp b/libs/ui/InputReader.cpp
index 5f5a4ac..6f042ec 100644
--- a/libs/ui/InputReader.cpp
+++ b/libs/ui/InputReader.cpp
@@ -945,7 +945,6 @@
         mAccumulator.fields = Accumulator::FIELD_BTN_MOUSE;
         mAccumulator.btnMouse = false;
         sync(when);
-        mAccumulator.clear();
     }
 
     InputMapper::reset();
@@ -958,9 +957,9 @@
         case BTN_MOUSE:
             mAccumulator.fields |= Accumulator::FIELD_BTN_MOUSE;
             mAccumulator.btnMouse = rawEvent->value != 0;
-
+            // Sync now since BTN_MOUSE is not necessarily followed by SYN_REPORT and
+            // we need to ensure that we report the up/down promptly.
             sync(rawEvent->when);
-            mAccumulator.clear();
             break;
         }
         break;
@@ -981,10 +980,7 @@
     case EV_SYN:
         switch (rawEvent->scanCode) {
         case SYN_REPORT:
-            if (mAccumulator.isDirty()) {
-                sync(rawEvent->when);
-                mAccumulator.clear();
-            }
+            sync(rawEvent->when);
             break;
         }
         break;
@@ -992,13 +988,17 @@
 }
 
 void TrackballInputMapper::sync(nsecs_t when) {
+    uint32_t fields = mAccumulator.fields;
+    if (fields == 0) {
+        return; // no new state changes, so nothing to do
+    }
+
     int motionEventAction;
     PointerCoords pointerCoords;
     nsecs_t downTime;
     { // acquire lock
         AutoMutex _l(mLock);
 
-        uint32_t fields = mAccumulator.fields;
         bool downChanged = fields & Accumulator::FIELD_BTN_MOUSE;
 
         if (downChanged) {
@@ -1061,6 +1061,8 @@
     } // release lock
 
     applyPolicyAndDispatch(when, motionEventAction, & pointerCoords, downTime);
+
+    mAccumulator.clear();
 }
 
 void TrackballInputMapper::applyPolicyAndDispatch(nsecs_t when, int32_t motionEventAction,
@@ -2380,8 +2382,8 @@
     mDown = false;
     mX = 0;
     mY = 0;
-    mPressure = 0;
-    mSize = 0;
+    mPressure = 1; // default to 1 for devices that don't report pressure
+    mSize = 0; // default to 0 for devices that don't report size
 }
 
 void SingleTouchInputMapper::reset() {
@@ -2397,9 +2399,9 @@
         case BTN_TOUCH:
             mAccumulator.fields |= Accumulator::FIELD_BTN_TOUCH;
             mAccumulator.btnTouch = rawEvent->value != 0;
-
-            sync(rawEvent->when);
-            mAccumulator.clear();
+            // Don't sync immediately.  Wait until the next SYN_REPORT since we might
+            // not have received valid position information yet.  This logic assumes that
+            // BTN_TOUCH is always followed by SYN_REPORT as part of a complete packet.
             break;
         }
         break;
@@ -2428,10 +2430,7 @@
     case EV_SYN:
         switch (rawEvent->scanCode) {
         case SYN_REPORT:
-            if (mAccumulator.isDirty()) {
-                sync(rawEvent->when);
-                mAccumulator.clear();
-            }
+            sync(rawEvent->when);
             break;
         }
         break;
@@ -2439,9 +2438,10 @@
 }
 
 void SingleTouchInputMapper::sync(nsecs_t when) {
-    /* Update device state */
-
     uint32_t fields = mAccumulator.fields;
+    if (fields == 0) {
+        return; // no new state changes, so nothing to do
+    }
 
     if (fields & Accumulator::FIELD_BTN_TOUCH) {
         mDown = mAccumulator.btnTouch;
@@ -2472,8 +2472,8 @@
         mCurrentTouch.pointers[0].y = mY;
         mCurrentTouch.pointers[0].pressure = mPressure;
         mCurrentTouch.pointers[0].size = mSize;
-        mCurrentTouch.pointers[0].touchMajor = mPressure;
-        mCurrentTouch.pointers[0].touchMinor = mPressure;
+        mCurrentTouch.pointers[0].touchMajor = mSize;
+        mCurrentTouch.pointers[0].touchMinor = mSize;
         mCurrentTouch.pointers[0].toolMajor = mSize;
         mCurrentTouch.pointers[0].toolMinor = mSize;
         mCurrentTouch.pointers[0].orientation = 0;
@@ -2482,6 +2482,8 @@
     }
 
     syncTouch(when, true);
+
+    mAccumulator.clear();
 }
 
 void SingleTouchInputMapper::configureAxes() {
@@ -2494,8 +2496,8 @@
     getEventHub()->getAbsoluteAxisInfo(getDeviceId(), ABS_PRESSURE, & mAxes.pressure);
     getEventHub()->getAbsoluteAxisInfo(getDeviceId(), ABS_TOOL_WIDTH, & mAxes.size);
 
-    mAxes.touchMajor = mAxes.pressure;
-    mAxes.touchMinor = mAxes.pressure;
+    mAxes.touchMajor = mAxes.size;
+    mAxes.touchMinor = mAxes.size;
     mAxes.toolMajor = mAxes.size;
     mAxes.toolMinor = mAxes.size;
 }
@@ -2585,10 +2587,7 @@
         }
 
         case SYN_REPORT:
-            if (mAccumulator.isDirty()) {
-                sync(rawEvent->when);
-                mAccumulator.clear();
-            }
+            sync(rawEvent->when);
             break;
         }
         break;
@@ -2598,11 +2597,7 @@
 void MultiTouchInputMapper::sync(nsecs_t when) {
     static const uint32_t REQUIRED_FIELDS =
             Accumulator::FIELD_ABS_MT_POSITION_X
-            | Accumulator::FIELD_ABS_MT_POSITION_Y
-            | Accumulator::FIELD_ABS_MT_TOUCH_MAJOR
-            | Accumulator::FIELD_ABS_MT_WIDTH_MAJOR;
-
-    /* Update device state */
+            | Accumulator::FIELD_ABS_MT_POSITION_Y;
 
     uint32_t inCount = mAccumulator.pointerCount;
     uint32_t outCount = 0;
@@ -2611,53 +2606,76 @@
     mCurrentTouch.clear();
 
     for (uint32_t inIndex = 0; inIndex < inCount; inIndex++) {
-        uint32_t fields = mAccumulator.pointers[inIndex].fields;
+        const Accumulator::Pointer& inPointer = mAccumulator.pointers[inIndex];
+        uint32_t fields = inPointer.fields;
 
         if ((fields & REQUIRED_FIELDS) != REQUIRED_FIELDS) {
-#if DEBUG_POINTERS
-            LOGD("Pointers: Missing required multitouch pointer fields: index=%d, fields=%d",
-                    inIndex, fields);
-            continue;
-#endif
-        }
-
-        if (mAccumulator.pointers[inIndex].absMTTouchMajor <= 0) {
-            // Pointer is not down.  Drop it.
+            // Some drivers send empty MT sync packets without X / Y to indicate a pointer up.
+            // Drop this finger.
             continue;
         }
 
-        mCurrentTouch.pointers[outCount].x = mAccumulator.pointers[inIndex].absMTPositionX;
-        mCurrentTouch.pointers[outCount].y = mAccumulator.pointers[inIndex].absMTPositionY;
+        PointerData& outPointer = mCurrentTouch.pointers[outCount];
+        outPointer.x = inPointer.absMTPositionX;
+        outPointer.y = inPointer.absMTPositionY;
 
-        mCurrentTouch.pointers[outCount].touchMajor =
-                mAccumulator.pointers[inIndex].absMTTouchMajor;
-        mCurrentTouch.pointers[outCount].touchMinor =
-                (fields & Accumulator::FIELD_ABS_MT_TOUCH_MINOR) != 0
-                ? mAccumulator.pointers[inIndex].absMTTouchMinor
-                        : mAccumulator.pointers[inIndex].absMTTouchMajor;
+        if (fields & Accumulator::FIELD_ABS_MT_TOUCH_MAJOR) {
+            int32_t value = inPointer.absMTTouchMajor;
+            if (value <= 0) {
+                // Some devices send sync packets with X / Y but with a 0 touch major to indicate
+                // a pointer up.  Drop this finger.
+                continue;
+            }
+            outPointer.touchMajor = inPointer.absMTTouchMajor;
+        } else {
+            outPointer.touchMajor = 0;
+        }
 
-        mCurrentTouch.pointers[outCount].toolMajor =
-                mAccumulator.pointers[inIndex].absMTWidthMajor;
-        mCurrentTouch.pointers[outCount].toolMinor =
-                (fields & Accumulator::FIELD_ABS_MT_WIDTH_MINOR) != 0
-                ? mAccumulator.pointers[inIndex].absMTWidthMinor
-                        : mAccumulator.pointers[inIndex].absMTWidthMajor;
+        if (fields & Accumulator::FIELD_ABS_MT_TOUCH_MINOR) {
+            outPointer.touchMinor = inPointer.absMTTouchMinor;
+        } else {
+            outPointer.touchMinor = outPointer.touchMajor;
+        }
 
-        mCurrentTouch.pointers[outCount].orientation =
-                (fields & Accumulator::FIELD_ABS_MT_ORIENTATION) != 0
-                ? mAccumulator.pointers[inIndex].absMTOrientation : 0;
+        if (fields & Accumulator::FIELD_ABS_MT_WIDTH_MAJOR) {
+            outPointer.toolMajor = inPointer.absMTWidthMajor;
+        } else {
+            outPointer.toolMajor = outPointer.touchMajor;
+        }
 
-        // Derive an approximation of pressure and size.
-        // FIXME assignment of pressure may be incorrect, probably better to let
-        // pressure = touch / width.  Later on we pass width to MotionEvent as a size, which
-        // isn't quite right either.  Should be using touch for that.
-        mCurrentTouch.pointers[outCount].pressure = mAccumulator.pointers[inIndex].absMTTouchMajor;
-        mCurrentTouch.pointers[outCount].size = mAccumulator.pointers[inIndex].absMTWidthMajor;
+        if (fields & Accumulator::FIELD_ABS_MT_WIDTH_MINOR) {
+            outPointer.toolMinor = inPointer.absMTWidthMinor;
+        } else {
+            outPointer.toolMinor = outPointer.toolMajor;
+        }
+
+        if (fields & Accumulator::FIELD_ABS_MT_ORIENTATION) {
+            outPointer.orientation = inPointer.absMTOrientation;
+        } else {
+            outPointer.orientation = 0;
+        }
+
+        if (fields & Accumulator::FIELD_ABS_MT_PRESSURE) {
+            outPointer.pressure = inPointer.absMTPressure;
+        } else {
+            // Derive an approximation of pressure.
+            // FIXME Traditionally we have just passed a normalized value based on
+            //       ABS_MT_TOUCH_MAJOR as an estimate of pressure but the result is not
+            //       very meaningful, particularly on large displays.  We should probably let
+            //       pressure = touch_major / tool_major but it is unclear whether that will
+            //       break applications.
+            outPointer.pressure = outPointer.touchMajor;
+        }
+
+        // Size is an alias for a normalized tool width.
+        // FIXME Normalized tool width doesn't actually make much sense since it literally
+        //       means the approaching contact major axis is divided by its full range as
+        //       reported by the driver.  On a large display this could produce very small values.
+        outPointer.size = outPointer.toolMajor;
 
         if (havePointerIds) {
-            if (fields & Accumulator::
-                    FIELD_ABS_MT_TRACKING_ID) {
-                uint32_t id = uint32_t(mAccumulator.pointers[inIndex].absMTTrackingId);
+            if (fields & Accumulator::FIELD_ABS_MT_TRACKING_ID) {
+                uint32_t id = uint32_t(inPointer.absMTTrackingId);
 
                 if (id > MAX_POINTER_ID) {
 #if DEBUG_POINTERS
@@ -2668,7 +2686,7 @@
                     havePointerIds = false;
                 }
                 else {
-                    mCurrentTouch.pointers[outCount].id = id;
+                    outPointer.id = id;
                     mCurrentTouch.idToIndex[id] = outCount;
                     mCurrentTouch.idBits.markBit(id);
                 }
@@ -2683,6 +2701,8 @@
     mCurrentTouch.pointerCount = outCount;
 
     syncTouch(when, havePointerIds);
+
+    mAccumulator.clear();
 }
 
 void MultiTouchInputMapper::configureAxes() {
@@ -2697,6 +2717,7 @@
     getEventHub()->getAbsoluteAxisInfo(getDeviceId(), ABS_MT_WIDTH_MAJOR, & mAxes.toolMajor);
     getEventHub()->getAbsoluteAxisInfo(getDeviceId(), ABS_MT_WIDTH_MINOR, & mAxes.toolMinor);
     getEventHub()->getAbsoluteAxisInfo(getDeviceId(), ABS_MT_ORIENTATION, & mAxes.orientation);
+    getEventHub()->getAbsoluteAxisInfo(getDeviceId(), ABS_MT_PRESSURE, & mAxes.pressure);
 
     if (! mAxes.touchMinor.valid) {
         mAxes.touchMinor = mAxes.touchMajor;
@@ -2706,7 +2727,10 @@
         mAxes.toolMinor = mAxes.toolMajor;
     }
 
-    mAxes.pressure = mAxes.touchMajor;
+    if (! mAxes.pressure.valid) {
+        mAxes.pressure = mAxes.touchMajor;
+    }
+
     mAxes.size = mAxes.toolMajor;
 }
 
diff --git a/services/surfaceflinger/Android.mk b/services/surfaceflinger/Android.mk
index 79772ed..a14bfb5 100644
--- a/services/surfaceflinger/Android.mk
+++ b/services/surfaceflinger/Android.mk
@@ -5,7 +5,6 @@
     clz.cpp.arm \
     DisplayHardware/DisplayHardware.cpp \
     DisplayHardware/DisplayHardwareBase.cpp \
-    DisplayHardware/HWComposer.cpp \
     BlurFilter.cpp.arm \
     GLExtensions.cpp \
     Layer.cpp \
diff --git a/services/surfaceflinger/DisplayHardware/DisplayHardware.cpp b/services/surfaceflinger/DisplayHardware/DisplayHardware.cpp
index 166c528..2eac0a8 100644
--- a/services/surfaceflinger/DisplayHardware/DisplayHardware.cpp
+++ b/services/surfaceflinger/DisplayHardware/DisplayHardware.cpp
@@ -36,11 +36,11 @@
 
 #include "DisplayHardware/DisplayHardware.h"
 
+#include <hardware/copybit.h>
 #include <hardware/overlay.h>
 #include <hardware/gralloc.h>
 
 #include "GLExtensions.h"
-#include "HWComposer.h"
 
 using namespace android;
 
@@ -76,7 +76,7 @@
         const sp<SurfaceFlinger>& flinger,
         uint32_t dpy)
     : DisplayHardwareBase(flinger, dpy),
-      mFlags(0), mHwc(0)
+      mFlags(0)
 {
     init(dpy);
 }
@@ -262,17 +262,6 @@
 
     // Unbind the context from this thread
     eglMakeCurrent(display, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
-
-
-    // initialize the H/W composer
-    mHwc = new HWComposer();
-    if (mHwc->initCheck() == NO_ERROR) {
-        mHwc->setFrameBuffer(mDisplay, mSurface);
-    }
-}
-
-HWComposer& DisplayHardware::getHwComposer() const {
-    return *mHwc;
 }
 
 /*
@@ -328,12 +317,7 @@
     }
     
     mPageFlipCount++;
-
-    if (mHwc->initCheck() == NO_ERROR) {
-        mHwc->commit();
-    } else {
-        eglSwapBuffers(dpy, surface);
-    }
+    eglSwapBuffers(dpy, surface);
     checkEGLErrors("eglSwapBuffers");
 
     // for debugging
diff --git a/services/surfaceflinger/DisplayHardware/DisplayHardware.h b/services/surfaceflinger/DisplayHardware/DisplayHardware.h
index f2cfd2d..66bf521 100644
--- a/services/surfaceflinger/DisplayHardware/DisplayHardware.h
+++ b/services/surfaceflinger/DisplayHardware/DisplayHardware.h
@@ -34,11 +34,12 @@
 #include "DisplayHardware/DisplayHardwareBase.h"
 
 struct overlay_control_device_t;
+struct framebuffer_device_t;
+struct copybit_image_t;
 
 namespace android {
 
 class FramebufferNativeWindow;
-class HWComposer;
 
 class DisplayHardware : public DisplayHardwareBase
 {
@@ -79,9 +80,6 @@
     uint32_t getPageFlipCount() const;
     EGLDisplay getEGLDisplay() const { return mDisplay; }
     overlay_control_device_t* getOverlayEngine() const { return mOverlayEngine; }
-
-    // Hardware Composer
-    HWComposer& getHwComposer() const;
     
     status_t compositionComplete() const;
     
@@ -109,8 +107,6 @@
     GLint           mMaxViewportDims;
     GLint           mMaxTextureSize;
     
-    HWComposer*     mHwc;
-
     sp<FramebufferNativeWindow> mNativeWindow;
     overlay_control_device_t* mOverlayEngine;
 };
diff --git a/services/surfaceflinger/DisplayHardware/HWComposer.cpp b/services/surfaceflinger/DisplayHardware/HWComposer.cpp
deleted file mode 100644
index 0291d78..0000000
--- a/services/surfaceflinger/DisplayHardware/HWComposer.cpp
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdint.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-
-#include <utils/Errors.h>
-
-#include <hardware/hardware.h>
-
-#include <cutils/log.h>
-
-#include <EGL/egl.h>
-
-#include "HWComposer.h"
-
-namespace android {
-// ---------------------------------------------------------------------------
-
-HWComposer::HWComposer()
-    : mModule(0), mHwc(0), mList(0), mCapacity(0),
-      mDpy(EGL_NO_DISPLAY), mSur(EGL_NO_SURFACE)
-{
-    int err = hw_get_module(HWC_HARDWARE_MODULE_ID, &mModule);
-    LOGW_IF(err, "%s module not found", HWC_HARDWARE_MODULE_ID);
-    if (err == 0) {
-        err = hwc_open(mModule, &mHwc);
-        LOGE_IF(err, "%s device failed to initialize (%s)",
-                HWC_HARDWARE_COMPOSER, strerror(-err));
-    }
-}
-
-HWComposer::~HWComposer() {
-    free(mList);
-    if (mHwc) {
-        hwc_close(mHwc);
-    }
-}
-
-status_t HWComposer::initCheck() const {
-    return mHwc ? NO_ERROR : NO_INIT;
-}
-
-void HWComposer::setFrameBuffer(EGLDisplay dpy, EGLSurface sur) {
-    mDpy = (hwc_display_t)dpy;
-    mSur = (hwc_surface_t)sur;
-}
-
-status_t HWComposer::createWorkList(size_t numLayers) {
-    if (mHwc) {
-        if (!mList || mCapacity < numLayers) {
-            free(mList);
-            size_t size = sizeof(hwc_layer_list) + numLayers*sizeof(hwc_layer_t);
-            mList = (hwc_layer_list_t*)malloc(size);
-            mCapacity = numLayers;
-        }
-        mList->flags = HWC_GEOMETRY_CHANGED;
-        mList->numHwLayers = numLayers;
-    }
-    return NO_ERROR;
-}
-
-status_t HWComposer::prepare() const {
-    int err = mHwc->prepare(mHwc, mList);
-    return (status_t)err;
-}
-
-status_t HWComposer::commit() const {
-    int err = mHwc->set(mHwc, mDpy, mSur, mList);
-    mList->flags &= ~HWC_GEOMETRY_CHANGED;
-    return (status_t)err;
-}
-
-size_t HWComposer::getNumLayers() const {
-    return mList ? mList->numHwLayers : 0;
-}
-
-hwc_layer_t* HWComposer::getLayers() const {
-    return mList ? mList->hwLayers : 0;
-}
-
-// ---------------------------------------------------------------------------
-}; // namespace android
diff --git a/services/surfaceflinger/DisplayHardware/HWComposer.h b/services/surfaceflinger/DisplayHardware/HWComposer.h
deleted file mode 100644
index c5d5c2b..0000000
--- a/services/surfaceflinger/DisplayHardware/HWComposer.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_SF_HWCOMPOSER_H
-#define ANDROID_SF_HWCOMPOSER_H
-
-#include <stdint.h>
-#include <sys/types.h>
-
-#include <EGL/egl.h>
-
-#include <hardware/hwcomposer.h>
-
-namespace android {
-// ---------------------------------------------------------------------------
-
-class HWComposer
-{
-public:
-
-    HWComposer();
-    ~HWComposer();
-
-    status_t initCheck() const;
-
-    // tells the HAL what the framebuffer is
-    void setFrameBuffer(EGLDisplay dpy, EGLSurface sur);
-
-    // create a work list for numLayers layer
-    status_t createWorkList(size_t numLayers);
-
-    // Asks the HAL what it can do
-    status_t prepare() const;
-
-    // commits the list
-    status_t commit() const;
-
-
-    size_t getNumLayers() const;
-    hwc_layer_t* getLayers() const;
-
-private:
-    hw_module_t const*      mModule;
-    hwc_composer_device_t*  mHwc;
-    hwc_layer_list_t*       mList;
-    size_t                  mCapacity;
-    hwc_display_t           mDpy;
-    hwc_surface_t           mSur;
-};
-
-
-// ---------------------------------------------------------------------------
-}; // namespace android
-
-#endif // ANDROID_SF_HWCOMPOSER_H
diff --git a/services/surfaceflinger/Layer.cpp b/services/surfaceflinger/Layer.cpp
index 3720e16..629d993 100644
--- a/services/surfaceflinger/Layer.cpp
+++ b/services/surfaceflinger/Layer.cpp
@@ -35,7 +35,6 @@
 #include "Layer.h"
 #include "SurfaceFlinger.h"
 #include "DisplayHardware/DisplayHardware.h"
-#include "DisplayHardware/HWComposer.h"
 
 
 #define DEBUG_RESIZE    0
@@ -178,62 +177,6 @@
     return NO_ERROR;
 }
 
-void Layer::setGeometry(hwc_layer_t* hwcl)
-{
-    hwcl->compositionType = HWC_FRAMEBUFFER;
-    hwcl->hints = 0;
-    hwcl->flags = 0;
-    hwcl->transform = 0;
-    hwcl->blending = HWC_BLENDING_NONE;
-
-    // we can't do alpha-fade with the hwc HAL
-    const State& s(drawingState());
-    if (s.alpha < 0xFF) {
-        hwcl->flags = HWC_SKIP_LAYER;
-        return;
-    }
-
-    // we can only handle simple transformation
-    if (mOrientation & Transform::ROT_INVALID) {
-        hwcl->flags = HWC_SKIP_LAYER;
-        return;
-    }
-
-    hwcl->transform = mOrientation;
-
-    if (needsBlending()) {
-        hwcl->blending = mPremultipliedAlpha ?
-                HWC_BLENDING_PREMULT : HWC_BLENDING_COVERAGE;
-    }
-
-    hwcl->displayFrame.left   = mTransformedBounds.left;
-    hwcl->displayFrame.top    = mTransformedBounds.top;
-    hwcl->displayFrame.right  = mTransformedBounds.right;
-    hwcl->displayFrame.bottom = mTransformedBounds.bottom;
-
-    hwcl->visibleRegionScreen.rects =
-            reinterpret_cast<hwc_rect_t const *>(
-                    visibleRegionScreen.getArray(
-                            &hwcl->visibleRegionScreen.numRects));
-}
-
-void Layer::setPerFrameData(hwc_layer_t* hwcl) {
-    sp<GraphicBuffer> buffer(mBufferManager.getActiveBuffer());
-    if (buffer == NULL) {
-        // this situation can happen if we ran out of memory for instance.
-        // not much we can do. continue to use whatever texture was bound
-        // to this context.
-        hwcl->handle = NULL;
-        return;
-    }
-    hwcl->handle = const_cast<native_handle_t*>(buffer->handle);
-    // TODO: set the crop value properly
-    hwcl->sourceCrop.left   = 0;
-    hwcl->sourceCrop.top    = 0;
-    hwcl->sourceCrop.right  = buffer->width;
-    hwcl->sourceCrop.bottom = buffer->height;
-}
-
 void Layer::reloadTexture(const Region& dirty)
 {
     sp<GraphicBuffer> buffer(mBufferManager.getActiveBuffer());
diff --git a/services/surfaceflinger/Layer.h b/services/surfaceflinger/Layer.h
index 188da6a..e1d283b 100644
--- a/services/surfaceflinger/Layer.h
+++ b/services/surfaceflinger/Layer.h
@@ -68,8 +68,6 @@
     bool isFixedSize() const;
 
     // LayerBase interface
-    virtual void setGeometry(hwc_layer_t* hwcl);
-    virtual void setPerFrameData(hwc_layer_t* hwcl);
     virtual void onDraw(const Region& clip) const;
     virtual uint32_t doTransaction(uint32_t transactionFlags);
     virtual void lockPageFlip(bool& recomputeVisibleRegions);
diff --git a/services/surfaceflinger/LayerBase.cpp b/services/surfaceflinger/LayerBase.cpp
index 043d54d..91ac915 100644
--- a/services/surfaceflinger/LayerBase.cpp
+++ b/services/surfaceflinger/LayerBase.cpp
@@ -307,15 +307,6 @@
     }
 }
 
-void LayerBase::setGeometry(hwc_layer_t* hwcl) {
-    hwcl->flags |= HWC_SKIP_LAYER;
-}
-
-void LayerBase::setPerFrameData(hwc_layer_t* hwcl) {
-    hwcl->compositionType = HWC_FRAMEBUFFER;
-    hwcl->handle = NULL;
-}
-
 void LayerBase::draw(const Region& clip) const
 {
     // reset GL state
diff --git a/services/surfaceflinger/LayerBase.h b/services/surfaceflinger/LayerBase.h
index dd1cd05..22bf857 100644
--- a/services/surfaceflinger/LayerBase.h
+++ b/services/surfaceflinger/LayerBase.h
@@ -35,8 +35,6 @@
 
 #include <pixelflinger/pixelflinger.h>
 
-#include <hardware/hwcomposer.h>
-
 #include "Transform.h"
 
 namespace android {
@@ -110,10 +108,6 @@
 
     virtual const char* getTypeId() const { return "LayerBase"; }
 
-    virtual void setGeometry(hwc_layer_t* hwcl);
-
-    virtual void setPerFrameData(hwc_layer_t* hwcl);
-
     /**
      * draw - performs some global clipping optimizations
      * and calls onDraw().
diff --git a/services/surfaceflinger/SurfaceFlinger.cpp b/services/surfaceflinger/SurfaceFlinger.cpp
index d257897..637ae48 100644
--- a/services/surfaceflinger/SurfaceFlinger.cpp
+++ b/services/surfaceflinger/SurfaceFlinger.cpp
@@ -52,7 +52,6 @@
 #include "SurfaceFlinger.h"
 
 #include "DisplayHardware/DisplayHardware.h"
-#include "DisplayHardware/HWComposer.h"
 
 /* ideally AID_GRAPHICS would be in a semi-public header
  * or there would be a way to map a user/group name to its id
@@ -77,7 +76,6 @@
         mAccessSurfaceFlinger("android.permission.ACCESS_SURFACE_FLINGER"),
         mDump("android.permission.DUMP"),
         mVisibleRegionsDirty(false),
-        mHwWorkListDirty(false),
         mDeferReleaseConsole(false),
         mFreezeDisplay(false),
         mFreezeCount(0),
@@ -370,11 +368,6 @@
     // post surfaces (if needed)
     handlePageFlip();
 
-    if (UNLIKELY(mHwWorkListDirty)) {
-        // build the h/w work list
-        handleWorkList();
-    }
-
     const DisplayHardware& hw(graphicPlane(0).displayHardware());
     if (LIKELY(hw.canDraw() && !isFrozen())) {
         // repaint the framebuffer (if needed)
@@ -450,7 +443,6 @@
         handleTransactionLocked(transactionFlags, ditchedLayers);
         mLastTransactionTime = systemTime() - now;
         mDebugInTransaction = 0;
-        mHwWorkListDirty = true;
         // here the transaction has been committed
     }
 
@@ -458,7 +450,6 @@
      * Clean-up all layers that went away
      * (do this without the lock held)
      */
-
     const size_t count = ditchedLayers.size();
     for (size_t i=0 ; i<count ; i++) {
         if (ditchedLayers[i] != 0) {
@@ -692,8 +683,8 @@
 void SurfaceFlinger::handlePageFlip()
 {
     bool visibleRegions = mVisibleRegionsDirty;
-    LayerVector& currentLayers(
-            const_cast<LayerVector&>(mDrawingState.layersSortedByZ));
+    LayerVector& currentLayers = const_cast<LayerVector&>(
+            mDrawingState.layersSortedByZ);
     visibleRegions |= lockPageFlip(currentLayers);
 
         const DisplayHardware& hw = graphicPlane(0).displayHardware();
@@ -716,7 +707,6 @@
 
             mWormholeRegion = screenRegion.subtract(opaqueRegion);
             mVisibleRegionsDirty = false;
-            mHwWorkListDirty = true;
         }
 
     unlockPageFlip(currentLayers);
@@ -747,20 +737,6 @@
     }
 }
 
-void SurfaceFlinger::handleWorkList()
-{
-    mHwWorkListDirty = false;
-    HWComposer& hwc(graphicPlane(0).displayHardware().getHwComposer());
-    if (hwc.initCheck() == NO_ERROR) {
-        const Vector< sp<LayerBase> >& currentLayers(mVisibleLayersSortedByZ);
-        const size_t count = currentLayers.size();
-        hwc.createWorkList(count);
-        hwc_layer_t* const cur(hwc.getLayers());
-        for (size_t i=0 ; cur && i<count ; i++) {
-            currentLayers[i]->setGeometry(&cur[i]);
-        }
-    }
-}
 
 void SurfaceFlinger::handleRepaint()
 {
@@ -825,72 +801,9 @@
         // draw something...
         drawWormhole();
     }
-
-    status_t err = NO_ERROR;
     const Vector< sp<LayerBase> >& layers(mVisibleLayersSortedByZ);
-    size_t count = layers.size();
-
-    const DisplayHardware& hw(graphicPlane(0).displayHardware());
-    HWComposer& hwc(hw.getHwComposer());
-    hwc_layer_t* const cur(hwc.getLayers());
-
-    LOGE_IF(cur && hwc.getNumLayers() != count,
-            "HAL number of layers (%d) doesn't match surfaceflinger (%d)",
-            hwc.getNumLayers(), count);
-
-    // just to be extra-safe, use the smallest count
-    if (hwc.initCheck() == NO_ERROR) {
-        count = count < hwc.getNumLayers() ? count : hwc.getNumLayers();
-    }
-
-    /*
-     *  update the per-frame h/w composer data for each layer
-     *  and build the transparent region of the FB
-     */
-    Region transparent;
-    if (cur) {
-        for (size_t i=0 ; i<count ; i++) {
-            const sp<LayerBase>& layer(layers[i]);
-            layer->setPerFrameData(&cur[i]);
-            if (cur[i].hints & HWC_HINT_CLEAR_FB) {
-                if (!(layer->needsBlending())) {
-                    transparent.orSelf(layer->visibleRegionScreen);
-                }
-            }
-        }
-        err = hwc.prepare();
-        LOGE_IF(err, "HWComposer::prepare failed (%s)", strerror(-err));
-    }
-
-    /*
-     *  clear the area of the FB that need to be transparent
-     */
-    transparent.andSelf(dirty);
-    if (!transparent.isEmpty()) {
-        glClearColor(0,0,0,0);
-        Region::const_iterator it = transparent.begin();
-        Region::const_iterator const end = transparent.end();
-        const int32_t height = hw.getHeight();
-        while (it != end) {
-            const Rect& r(*it++);
-            const GLint sy = height - (r.top + r.height());
-            glScissor(r.left, sy, r.width(), r.height());
-            glClear(GL_COLOR_BUFFER_BIT);
-        }
-    }
-
-
-    /*
-     * and then, render the layers targeted at the framebuffer
-     */
-    for (size_t i=0 ; i<count ; i++) {
-        if (cur) {
-            if (!(cur[i].compositionType == HWC_FRAMEBUFFER) ||
-                    cur[i].flags & HWC_SKIP_LAYER) {
-                // skip layers handled by the HAL
-                continue;
-            }
-        }
+    const size_t count = layers.size();
+    for (size_t i=0 ; i<count ; ++i) {
         const sp<LayerBase>& layer(layers[i]);
         const Region clip(dirty.intersect(layer->visibleRegionScreen));
         if (!clip.isEmpty()) {
diff --git a/services/surfaceflinger/SurfaceFlinger.h b/services/surfaceflinger/SurfaceFlinger.h
index 8e286e5..8ecfc01 100644
--- a/services/surfaceflinger/SurfaceFlinger.h
+++ b/services/surfaceflinger/SurfaceFlinger.h
@@ -296,7 +296,6 @@
             void        handlePageFlip();
             bool        lockPageFlip(const LayerVector& currentLayers);
             void        unlockPageFlip(const LayerVector& currentLayers);
-            void        handleWorkList();
             void        handleRepaint();
             void        postFramebuffer();
             void        composeSurfaces(const Region& dirty);
@@ -371,7 +370,6 @@
                 Region                      mInvalidRegion;
                 Region                      mWormholeRegion;
                 bool                        mVisibleRegionsDirty;
-                bool                        mHwWorkListDirty;
                 bool                        mDeferReleaseConsole;
                 bool                        mFreezeDisplay;
                 int32_t                     mFreezeCount;