diff --git a/include/android/display_luts.h b/include/android/display_luts.h
new file mode 100644
index 0000000..5026646
--- /dev/null
+++ b/include/android/display_luts.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @addtogroup NativeActivity Native Activity
+ * @{
+ */
+
+/**
+ * @file display_luts.h
+ */
+#pragma once
+
+#include <inttypes.h>
+
+__BEGIN_DECLS
+
+/**
+ * The dimension of the lut
+ */
+enum ADisplayLuts_Dimension : int32_t {
+    ADISPLAYLUTS_ONE_DIMENSION = 1,
+    ADISPLAYLUTS_THREE_DIMENSION = 3,
+};
+
+/**
+ * The sampling key used by the lut
+ */
+enum ADisplayLuts_SamplingKey : int32_t {
+    ADISPLAYLUTS_SAMPLINGKEY_RGB = 0,
+    ADISPLAYLUTS_SAMPLINGKEY_MAX_RGB = 1,
+};
+
+/**
+ * Used to get and set display luts entry
+ */
+typedef struct ADisplayLutsEntry ADisplayLutsEntry;
+
+/**
+ * Used to get and set display luts
+ */
+typedef struct ADisplayLuts ADisplayLuts;
+
+/**
+ * Creates a \a ADisplayLutsEntry entry.
+ *
+ * You are responsible for mamanging the memory of the returned object.
+ * Always call \a ADisplayLutsEntry_destroy to release it after use.
+ *
+ * Functions like \a ADisplayLuts_set create their own copies of entries,
+ * therefore they don't take the ownership of the instance created by
+ * \a ADisplayLutsEntry_create.
+ *
+ * @param buffer The lut raw buffer. The function creates a copy of it and does not need to
+ * outlive the life of the ADisplayLutsEntry.
+ * @param length The length of lut raw buffer
+ * @param dimension The dimension of the lut. see \a ADisplayLuts_Dimension
+ * @param key The sampling key used by the lut. see \a ADisplayLuts_SamplingKey
+ * @return a new \a ADisplayLutsEntry instance.
+ */
+ADisplayLutsEntry* _Nonnull ADisplayLutsEntry_createEntry(float* _Nonnull buffer,
+        int32_t length, int32_t dimension, int32_t key) __INTRODUCED_IN(36);
+
+/**
+ * Destroy the \a ADisplayLutsEntry instance.
+ *
+ * @param entry The entry to be destroyed
+ */
+void ADisplayLutsEntry_destroy(ADisplayLutsEntry* _Nullable entry) __INTRODUCED_IN(36);
+
+/**
+ * Gets the dimension of the entry.
+ *
+ * The function is only valid for the lifetime of the `entry`.
+ *
+ * @param entry The entry to query
+ * @return the dimension of the lut
+ */
+ADisplayLuts_Dimension ADisplayLutsEntry_getDimension(const ADisplayLutsEntry* _Nonnull entry)
+        __INTRODUCED_IN(36);
+
+/**
+ * Gets the size for each dimension of the entry.
+ *
+ * The function is only valid for the lifetime of the `entry`.
+ *
+ * @param entry The entry to query
+ * @return the size of each dimension of the lut
+ */
+int32_t ADisplayLutsEntry_getSize(const ADisplayLutsEntry* _Nonnull entry)
+        __INTRODUCED_IN(36);
+
+/**
+ * Gets the sampling key used by the entry.
+ *
+ * The function is only valid for the lifetime of the `entry`.
+ *
+ * @param entry The entry to query
+ * @return the sampling key used by the lut
+ */
+ADisplayLuts_SamplingKey ADisplayLutsEntry_getSamplingKey(const ADisplayLutsEntry* _Nonnull entry)
+        __INTRODUCED_IN(36);
+
+/**
+ * Gets the lut buffer of the entry.
+ *
+ * The function is only valid for the lifetime of the `entry`.
+ *
+ * @param entry The entry to query
+ * @return a pointer to the raw lut buffer
+ */
+const float* _Nonnull ADisplayLutsEntry_getBuffer(const ADisplayLutsEntry* _Nonnull entry)
+        __INTRODUCED_IN(36);
+
+/**
+ * Creates a \a ADisplayLuts instance.
+ *
+ * You are responsible for mamanging the memory of the returned object.
+ * Always call \a ADisplayLuts_destroy to release it after use. E.g., after calling
+ * the function \a ASurfaceTransaction_setLuts.
+ *
+ * @return a new \a ADisplayLuts instance
+ */
+ADisplayLuts* _Nonnull ADisplayLuts_create() __INTRODUCED_IN(36);
+
+/**
+ * Sets Luts in order to be applied.
+ *
+ * The function accepts a single 1D Lut, or a single 3D Lut or both 1D and 3D Lut in order.
+ * And the function will replace any previously set lut(s).
+ * If you want to clear the previously set lut(s), set `entries` to be nullptr,
+ * and `numEntries` will be internally ignored.
+ *
+ * @param luts the pointer of the \a ADisplayLuts instance
+ * @param entries the pointer of the array of lut entries to be applied
+ * @param numEntries the number of lut entries. The value should be either 1 or 2.
+ */
+void ADisplayLuts_setEntries(ADisplayLuts* _Nonnull luts,
+        ADisplayLutsEntry* _Nullable *_Nullable entries, int32_t numEntries) __INTRODUCED_IN(36);
+
+/**
+ * Deletes the \a ADisplayLuts instance.
+ *
+ * @param luts The luts to be destroyed
+ */
+void ADisplayLuts_destroy(ADisplayLuts* _Nullable luts) __INTRODUCED_IN(36);
+
+__END_DECLS
+
+/** @} */
\ No newline at end of file
diff --git a/include/android/surface_control.h b/include/android/surface_control.h
index fe38e86..9554015 100644
--- a/include/android/surface_control.h
+++ b/include/android/surface_control.h
@@ -28,6 +28,7 @@
 
 #include <sys/cdefs.h>
 
+#include <android/display_luts.h>
 #include <android/choreographer.h>
 #include <android/data_space.h>
 #include <android/hardware_buffer.h>
@@ -713,6 +714,23 @@
         __INTRODUCED_IN(__ANDROID_API_V__);
 
 /**
+ * Sets the Lut(s) to be applied for the layer.
+ *
+ * The function makes a deep copy of the provided `luts`.
+ * Any modifications made to the `luts` object after calling this function
+ * will not affect the Lut(s) applied to the layer.
+ *
+ * @param surface_control The layer where Lut(s) is being applied
+ * @param luts The Lut(s) to be applied
+ *
+ * Available since API level 36.
+ */
+void ASurfaceTransaction_setLuts(ASurfaceTransaction* _Nonnull transaction,
+                                 ASurfaceControl* _Nonnull surface_control,
+                                 const struct ADisplayLuts* _Nullable luts)
+        __INTRODUCED_IN(36);
+
+/**
  * Same as ASurfaceTransaction_setFrameRateWithChangeStrategy(transaction, surface_control,
  * frameRate, compatibility, ANATIVEWINDOW_CHANGE_FRAME_RATE_ONLY_IF_SEAMLESS).
  *
diff --git a/include/private/display_luts_private.h b/include/private/display_luts_private.h
new file mode 100644
index 0000000..240e1f9
--- /dev/null
+++ b/include/private/display_luts_private.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2024 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <vector>
+#include <utils/RefBase.h>
+
+using namespace android;
+
+__BEGIN_DECLS
+
+struct ADisplayLutsEntry_buffer {
+    std::vector<float> data;
+};
+
+struct ADisplayLutsEntry_properties {
+    int32_t dimension;
+    int32_t size;
+    int32_t samplingKey;
+};
+
+struct ADisplayLutsEntry: public RefBase {
+    struct ADisplayLutsEntry_buffer buffer;
+    struct ADisplayLutsEntry_properties properties;
+    ADisplayLutsEntry() {}
+
+    // copy constructor
+    ADisplayLutsEntry(const ADisplayLutsEntry& other) :
+        buffer(other.buffer),
+        properties(other.properties) {}
+
+    // copy operator
+    ADisplayLutsEntry& operator=(const ADisplayLutsEntry& other) {
+        if (this != &other) { // Protect against self-assignment
+            buffer = other.buffer;
+            properties = other.properties;
+        }
+        return *this;
+    }
+};
+
+struct ADisplayLuts: public RefBase {
+    int32_t totalBufferSize;
+    std::vector<int32_t> offsets;
+    std::vector<sp<ADisplayLutsEntry>> entries;
+
+    ADisplayLuts() : totalBufferSize(0) {}
+};
+
+__END_DECLS
\ No newline at end of file