diff --git a/media/codec2/hal/client/client.cpp b/media/codec2/hal/client/client.cpp
index b0ce733..00820eb 100644
--- a/media/codec2/hal/client/client.cpp
+++ b/media/codec2/hal/client/client.cpp
@@ -1850,8 +1850,8 @@
     uint64_t consumerUsage = kDefaultConsumerUsage;
     {
         if (surface) {
-            int usage = 0;
-            status_t err = surface->query(NATIVE_WINDOW_CONSUMER_USAGE_BITS, &usage);
+            uint64_t usage = 0;
+            status_t err = surface->getConsumerUsage(&usage);
             if (err != NO_ERROR) {
                 ALOGD("setOutputSurface -- failed to get consumer usage bits (%d/%s). ignoring",
                         err, asString(err));
@@ -1864,8 +1864,7 @@
                 // they do not exist inside of C2 scope. Any buffer usage shall be communicated
                 // through the sideband channel.
 
-                // do an unsigned conversion as bit-31 may be 1
-                consumerUsage = (uint32_t)usage | kDefaultConsumerUsage;
+                consumerUsage = usage | kDefaultConsumerUsage;
             }
         }
 
diff --git a/media/codec2/hal/hidl/1.0/utils/InputSurfaceConnection.cpp b/media/codec2/hal/hidl/1.0/utils/InputSurfaceConnection.cpp
index 7c2e014..d3fdd6b 100644
--- a/media/codec2/hal/hidl/1.0/utils/InputSurfaceConnection.cpp
+++ b/media/codec2/hal/hidl/1.0/utils/InputSurfaceConnection.cpp
@@ -145,7 +145,7 @@
         //         C2AndroidMemoryUsage(C2MemoryUsage(usage.value)).
         //         asGrallocUsage();
 
-        uint32_t grallocUsage =
+        uint64_t grallocUsage =
                 mSinkName.compare(0, 11, "c2.android.") == 0 ?
                 GRALLOC_USAGE_SW_READ_OFTEN :
                 GRALLOC_USAGE_HW_VIDEO_ENCODER;
diff --git a/media/codec2/sfplugin/C2OMXNode.cpp b/media/codec2/sfplugin/C2OMXNode.cpp
index ed7d69c..92cfe31 100644
--- a/media/codec2/sfplugin/C2OMXNode.cpp
+++ b/media/codec2/sfplugin/C2OMXNode.cpp
@@ -230,6 +230,12 @@
             err = OK;
             break;
         }
+        case OMX_IndexParamConsumerUsageBits64: {
+            OMX_U64 *usage = (OMX_U64 *)params;
+            *usage = mUsage;
+            err = OK;
+            break;
+        }
         case OMX_IndexParamPortDefinition: {
             if (size < sizeof(OMX_PARAM_PORTDEFINITIONTYPE)) {
                 return BAD_VALUE;
@@ -293,6 +299,13 @@
             }
             mUsage = *((OMX_U32 *)params);
             return OK;
+
+        case OMX_IndexParamConsumerUsageBits64:
+            if (size != sizeof(OMX_U64)) {
+                return BAD_VALUE;
+            }
+            mUsage = *((OMX_U64 *)params);
+            return OK;
     }
     return ERROR_UNSUPPORTED;
 }
diff --git a/media/codec2/sfplugin/CCodec.cpp b/media/codec2/sfplugin/CCodec.cpp
index 6295b06..8013f8e 100644
--- a/media/codec2/sfplugin/CCodec.cpp
+++ b/media/codec2/sfplugin/CCodec.cpp
@@ -206,12 +206,19 @@
         mNode = new C2OMXNode(comp);
         mOmxNode = new hardware::media::omx::V1_0::utils::TWOmxNode(mNode);
         mNode->setFrameSize(mWidth, mHeight);
-
         // Usage is queried during configure(), so setting it beforehand.
-        OMX_U32 usage = mConfig.mUsage & 0xFFFFFFFF;
-        (void)mNode->setParameter(
-                (OMX_INDEXTYPE)OMX_IndexParamConsumerUsageBits,
-                &usage, sizeof(usage));
+        // 64 bit set parameter is existing only in C2OMXNode.
+        OMX_U64 usage64 = mConfig.mUsage;
+        status_t res = mNode->setParameter(
+                (OMX_INDEXTYPE)OMX_IndexParamConsumerUsageBits64,
+                &usage64, sizeof(usage64));
+
+        if (res != OK) {
+            OMX_U32 usage = mConfig.mUsage & 0xFFFFFFFF;
+            (void)mNode->setParameter(
+                    (OMX_INDEXTYPE)OMX_IndexParamConsumerUsageBits,
+                    &usage, sizeof(usage));
+        }
 
         return GetStatus(mSource->configure(
                 mOmxNode, static_cast<hardware::graphics::common::V1_0::Dataspace>(mDataSpace)));
diff --git a/media/libmedia/include/media/omx/1.0/Conversion.h b/media/libmedia/include/media/omx/1.0/Conversion.h
index 70217d5..af25015 100644
--- a/media/libmedia/include/media/omx/1.0/Conversion.h
+++ b/media/libmedia/include/media/omx/1.0/Conversion.h
@@ -606,8 +606,16 @@
     t->attr.height = l.getHeight();
     t->attr.stride = l.getStride();
     t->attr.format = static_cast<PixelFormat>(l.getPixelFormat());
-    t->attr.layerCount = l.getLayerCount();
-    t->attr.usage = l.getUsage();
+    // HACK
+    // anwBuffer.layerCount 8 bytes : GraphicBuffer::layerCount 4 bytes
+    // anwBuffer.usage      4 bytes : GraphicBuffer::usage      8 bytes
+    // We would like to retain high part of usage with high part of layerCount
+    uint64_t usage = l.getUsage();
+    uint32_t usageHigh = (usage >> 32);
+    uint32_t usageLow = (0xFFFFFFFF & usage);
+    uint32_t layerLow = l.getLayerCount();
+    t->attr.layerCount = ((uint64_t(usageHigh) << 32) | layerLow);
+    t->attr.usage = usageLow;
     t->attr.id = l.getId();
     t->attr.generationNumber = l.getGenerationNumber();
     t->nativeHandle = hidl_handle(l.handle);
@@ -637,30 +645,37 @@
         }
     }
 
-    size_t const numInts = 12 + (handle ? handle->numInts : 0);
+    size_t const numInts = 13 + (handle ? handle->numInts : 0);
     int32_t* ints = new int32_t[numInts];
 
     size_t numFds = static_cast<size_t>(handle ? handle->numFds : 0);
     int* fds = new int[numFds];
 
-    ints[0] = 'GBFR';
+    ints[0] = 'GB01';
     ints[1] = static_cast<int32_t>(t.attr.width);
     ints[2] = static_cast<int32_t>(t.attr.height);
     ints[3] = static_cast<int32_t>(t.attr.stride);
     ints[4] = static_cast<int32_t>(t.attr.format);
-    ints[5] = static_cast<int32_t>(t.attr.layerCount);
+    // HACK
+    // anwBuffer.layerCount 8 bytes : GraphicBuffer::layerCount 4 bytes
+    // anwBuffer.usage      4 bytes : GraphicBuffer::usage      8 bytes
+    // We would like to retain high part of usage with high part of layerCount
+    uint32_t layer = (0xFFFFFFFF & t.attr.layerCount);
+    uint32_t usageHigh = (t.attr.layerCount >> 32);
+    ints[5] = layer;
     ints[6] = static_cast<int32_t>(t.attr.usage);
     ints[7] = static_cast<int32_t>(t.attr.id >> 32);
     ints[8] = static_cast<int32_t>(t.attr.id & 0xFFFFFFFF);
     ints[9] = static_cast<int32_t>(t.attr.generationNumber);
     ints[10] = 0;
     ints[11] = 0;
+    ints[12] = usageHigh;
     if (handle) {
         ints[10] = static_cast<int32_t>(handle->numFds);
         ints[11] = static_cast<int32_t>(handle->numInts);
         int* intsStart = handle->data + handle->numFds;
         std::copy(handle->data, intsStart, fds);
-        std::copy(intsStart, intsStart + handle->numInts, &ints[12]);
+        std::copy(intsStart, intsStart + handle->numInts, &ints[13]);
     }
 
     void const* constBuffer = static_cast<void const*>(ints);
diff --git a/media/libstagefright/omx/1.0/WGraphicBufferSource.cpp b/media/libstagefright/omx/1.0/WGraphicBufferSource.cpp
index f7bf3ba..f4ccaba 100644
--- a/media/libstagefright/omx/1.0/WGraphicBufferSource.cpp
+++ b/media/libstagefright/omx/1.0/WGraphicBufferSource.cpp
@@ -143,7 +143,7 @@
 
     // use consumer usage bits queried from encoder, but always add
     // HW_VIDEO_ENCODER for backward compatibility.
-    uint32_t  consumerUsage;
+    uint64_t  consumerUsage;
     void *_params = &consumerUsage;
     uint8_t *params = static_cast<uint8_t*>(_params);
     fnStatus = UNKNOWN_ERROR;
@@ -155,15 +155,32 @@
                         outParams.data() + outParams.size(),
                         params);
             });
+
+    // try 64 bit consumer usage first
     auto transStatus = omxNode->getParameter(
-            static_cast<uint32_t>(OMX_IndexParamConsumerUsageBits),
+            static_cast<uint32_t>(OMX_IndexParamConsumerUsageBits64),
             inHidlBytes(&consumerUsage, sizeof(consumerUsage)),
             _hidl_cb);
     if (!transStatus.isOk()) {
         return toStatus(FAILED_TRANSACTION);
     }
     if (fnStatus != OK) {
-        consumerUsage = 0;
+        // try 32 bit consumer usage upon failure
+        uint32_t usage;
+        _params = &usage;
+        params = static_cast<uint8_t*>(_params);
+        transStatus = omxNode->getParameter(
+                static_cast<uint32_t>(OMX_IndexParamConsumerUsageBits),
+                inHidlBytes(&usage, sizeof(usage)),
+                _hidl_cb);
+        if (!transStatus.isOk()) {
+            return toStatus(FAILED_TRANSACTION);
+        }
+        if (fnStatus != OK) {
+            consumerUsage = 0;
+        } else {
+            consumerUsage = usage;
+        }
     }
 
     OMX_PARAM_PORTDEFINITIONTYPE def;
diff --git a/media/libstagefright/omx/OmxGraphicBufferSource.cpp b/media/libstagefright/omx/OmxGraphicBufferSource.cpp
index 9484046..5d653bc 100644
--- a/media/libstagefright/omx/OmxGraphicBufferSource.cpp
+++ b/media/libstagefright/omx/OmxGraphicBufferSource.cpp
@@ -86,6 +86,18 @@
         uint32_t frameWidth,
         uint32_t frameHeight,
         uint32_t consumerUsage) {
+    uint64_t consumerUsage64 = static_cast<uint64_t>(consumerUsage);
+    return configure(omxNode, dataSpace, bufferCount,
+                     frameWidth, frameHeight, consumerUsage64);
+}
+
+status_t OmxGraphicBufferSource::configure(
+        const sp<IOmxNodeWrapper>& omxNode,
+        int32_t dataSpace,
+        int32_t bufferCount,
+        uint32_t frameWidth,
+        uint32_t frameHeight,
+        uint64_t consumerUsage) {
     if (omxNode == NULL) {
         return BAD_VALUE;
     }
diff --git a/media/libstagefright/omx/include/media/stagefright/omx/1.0/Conversion.h b/media/libstagefright/omx/include/media/stagefright/omx/1.0/Conversion.h
index cf236d8..a6e23ed 100644
--- a/media/libstagefright/omx/include/media/stagefright/omx/1.0/Conversion.h
+++ b/media/libstagefright/omx/include/media/stagefright/omx/1.0/Conversion.h
@@ -425,8 +425,16 @@
     t->attr.anwBuffer.stride = graphicBuffer->getStride();
     t->attr.anwBuffer.format = static_cast<PixelFormat>(
             graphicBuffer->getPixelFormat());
-    t->attr.anwBuffer.layerCount = graphicBuffer->getLayerCount();
-    t->attr.anwBuffer.usage = graphicBuffer->getUsage();
+    // HACK
+    // anwBuffer.layerCount 8 bytes : GraphicBuffer::layerCount 4 bytes
+    // anwBuffer.usage      4 bytes : GraphicBuffer::usage      8 bytes
+    // We would like to retain high part of usage with high part of layerCount
+    uint64_t usage = graphicBuffer->getUsage();
+    uint32_t usageHigh = (usage >> 32);
+    uint32_t usageLow = (0xFFFFFFFF & usage);
+    uint32_t layerLow = graphicBuffer->getLayerCount();
+    t->attr.anwBuffer.layerCount = ((uint64_t(usageHigh) << 32) | layerLow);
+    t->attr.anwBuffer.usage = usageLow;
     t->nativeHandle = graphicBuffer->handle;
     return t;
 }
diff --git a/media/libstagefright/omx/include/media/stagefright/omx/OmxGraphicBufferSource.h b/media/libstagefright/omx/include/media/stagefright/omx/OmxGraphicBufferSource.h
index e576d75..8b920c1 100644
--- a/media/libstagefright/omx/include/media/stagefright/omx/OmxGraphicBufferSource.h
+++ b/media/libstagefright/omx/include/media/stagefright/omx/OmxGraphicBufferSource.h
@@ -63,7 +63,9 @@
     // ------------------------------
 
     // Configure the buffer source to be used with an OMX node with the default
-    // data space.
+    // data space.(32-bit consumerUsage flag, for vendor partition
+    // compatibility)
+    [[deprecated("use configure() with a 64-bit consumerUsage flag instead")]]
     status_t configure(
         const sp<IOmxNodeWrapper> &omxNode,
         int32_t dataSpace,
@@ -72,6 +74,16 @@
         uint32_t frameHeight,
         uint32_t consumerUsage);
 
+    // Configure the buffer source to be used with an OMX node with the default
+    // data space. (64-bit consumerUsage flag)
+    status_t configure(
+        const sp<IOmxNodeWrapper> &omxNode,
+        int32_t dataSpace,
+        int32_t bufferCount,
+        uint32_t frameWidth,
+        uint32_t frameHeight,
+        uint64_t consumerUsage);
+
     // Rest of the interface in GraphicBufferSource.
 
 private:
diff --git a/media/module/bqhelper/GraphicBufferSource.cpp b/media/module/bqhelper/GraphicBufferSource.cpp
index 569420b..82ddbc0 100644
--- a/media/module/bqhelper/GraphicBufferSource.cpp
+++ b/media/module/bqhelper/GraphicBufferSource.cpp
@@ -1151,6 +1151,18 @@
         uint32_t frameWidth,
         uint32_t frameHeight,
         uint32_t consumerUsage) {
+    uint64_t consumerUsage64 = static_cast<uint64_t>(consumerUsage);
+    return configure(component, dataSpace, bufferCount,
+                     frameWidth, frameHeight, consumerUsage64);
+}
+
+status_t GraphicBufferSource::configure(
+        const sp<ComponentWrapper>& component,
+        int32_t dataSpace,
+        int32_t bufferCount,
+        uint32_t frameWidth,
+        uint32_t frameHeight,
+        uint64_t consumerUsage) {
     if (component == NULL) {
         return BAD_VALUE;
     }
diff --git a/media/module/bqhelper/include/media/stagefright/bqhelper/GraphicBufferSource.h b/media/module/bqhelper/include/media/stagefright/bqhelper/GraphicBufferSource.h
index fe6bcce..5225a48 100644
--- a/media/module/bqhelper/include/media/stagefright/bqhelper/GraphicBufferSource.h
+++ b/media/module/bqhelper/include/media/stagefright/bqhelper/GraphicBufferSource.h
@@ -122,7 +122,9 @@
     // ------------------------------
 
     // Configure the buffer source to be used with a component with the default
-    // data space.
+    // data space. (32-bit consumerUsage flag, for vendor partition
+    // compatibility)
+    [[deprecated("use configure() with a 64-bit consumerUsage flag instead")]]
     status_t configure(
         const sp<ComponentWrapper> &component,
         int32_t dataSpace,
@@ -131,6 +133,16 @@
         uint32_t frameHeight,
         uint32_t consumerUsage);
 
+    // Configure the buffer source to be used with a component with the default
+    // data space. (64-bit consumerUsage flag)
+    status_t configure(
+        const sp<ComponentWrapper> &component,
+        int32_t dataSpace,
+        int32_t bufferCount,
+        uint32_t frameWidth,
+        uint32_t frameHeight,
+        uint64_t consumerUsage);
+
     // This is called after the last input frame has been submitted or buffer
     // timestamp is greater or equal than stopTimeUs. We need to submit an empty
     // buffer with the EOS flag set.  If we don't have a codec buffer ready,