diff --git a/camera/aidl/android/hardware/camera2/ICameraDeviceUser.aidl b/camera/aidl/android/hardware/camera2/ICameraDeviceUser.aidl
index 07d4e7e..4ced08c 100644
--- a/camera/aidl/android/hardware/camera2/ICameraDeviceUser.aidl
+++ b/camera/aidl/android/hardware/camera2/ICameraDeviceUser.aidl
@@ -79,8 +79,9 @@
      * <p>
      * @param operatingMode The kind of session to create; either NORMAL_MODE or
      *     CONSTRAINED_HIGH_SPEED_MODE. Must be a non-negative value.
+     * @param sessionParams Session wide camera parameters
      */
-    void endConfigure(int operatingMode);
+    void endConfigure(int operatingMode, in CameraMetadataNative sessionParams);
 
     void deleteStream(int streamId);
 
diff --git a/camera/ndk/NdkCameraDevice.cpp b/camera/ndk/NdkCameraDevice.cpp
index ac4beea..812a312 100644
--- a/camera/ndk/NdkCameraDevice.cpp
+++ b/camera/ndk/NdkCameraDevice.cpp
@@ -220,5 +220,21 @@
                 __FUNCTION__, device, outputs, callbacks, session);
         return ACAMERA_ERROR_INVALID_PARAMETER;
     }
-    return device->createCaptureSession(outputs, callbacks, session);
+    return device->createCaptureSession(outputs, nullptr, callbacks, session);
+}
+
+EXPORT
+camera_status_t ACameraDevice_createCaptureSessionWithSessionParameters(
+        ACameraDevice* device,
+        const ACaptureSessionOutputContainer*       outputs,
+        const ACaptureRequest* sessionParameters,
+        const ACameraCaptureSession_stateCallbacks* callbacks,
+        /*out*/ACameraCaptureSession** session) {
+    ATRACE_CALL();
+    if (device == nullptr || outputs == nullptr || callbacks == nullptr || session == nullptr) {
+        ALOGE("%s: Error: invalid input: device %p, outputs %p, callbacks %p, session %p",
+                __FUNCTION__, device, outputs, callbacks, session);
+        return ACAMERA_ERROR_INVALID_PARAMETER;
+    }
+    return device->createCaptureSession(outputs, sessionParameters, callbacks, session);
 }
diff --git a/camera/ndk/impl/ACameraDevice.cpp b/camera/ndk/impl/ACameraDevice.cpp
index 45fa28e..4bb82cb 100644
--- a/camera/ndk/impl/ACameraDevice.cpp
+++ b/camera/ndk/impl/ACameraDevice.cpp
@@ -157,6 +157,7 @@
 camera_status_t
 CameraDevice::createCaptureSession(
         const ACaptureSessionOutputContainer*       outputs,
+        const ACaptureRequest* sessionParameters,
         const ACameraCaptureSession_stateCallbacks* callbacks,
         /*out*/ACameraCaptureSession** session) {
     sp<ACameraCaptureSession> currentSession = mCurrentSession.promote();
@@ -172,7 +173,7 @@
     }
 
     // Create new session
-    ret = configureStreamsLocked(outputs);
+    ret = configureStreamsLocked(outputs, sessionParameters);
     if (ret != ACAMERA_OK) {
         ALOGE("Fail to create new session. cannot configure streams");
         return ret;
@@ -434,7 +435,7 @@
     }
 
     // No new session, unconfigure now
-    camera_status_t ret = configureStreamsLocked(nullptr);
+    camera_status_t ret = configureStreamsLocked(nullptr, nullptr);
     if (ret != ACAMERA_OK) {
         ALOGE("Unconfigure stream failed. Device might still be configured! ret %d", ret);
     }
@@ -598,7 +599,8 @@
 }
 
 camera_status_t
-CameraDevice::configureStreamsLocked(const ACaptureSessionOutputContainer* outputs) {
+CameraDevice::configureStreamsLocked(const ACaptureSessionOutputContainer* outputs,
+        const ACaptureRequest* sessionParameters) {
     ACaptureSessionOutputContainer emptyOutput;
     if (outputs == nullptr) {
         outputs = &emptyOutput;
@@ -694,7 +696,11 @@
         mConfiguredOutputs.insert(std::make_pair(streamId, outputPair));
     }
 
-    remoteRet = mRemote->endConfigure(/*isConstrainedHighSpeed*/ false);
+    CameraMetadata params;
+    if ((sessionParameters != nullptr) && (sessionParameters->settings != nullptr)) {
+        params.append(sessionParameters->settings->getInternalData());
+    }
+    remoteRet = mRemote->endConfigure(/*isConstrainedHighSpeed*/ false, params);
     if (remoteRet.serviceSpecificErrorCode() == hardware::ICameraService::ERROR_ILLEGAL_ARGUMENT) {
         ALOGE("Camera device %s cannnot support app output configuration: %s", getId(),
                 remoteRet.toString8().string());
diff --git a/camera/ndk/impl/ACameraDevice.h b/camera/ndk/impl/ACameraDevice.h
index 23cc1a1..5608606 100644
--- a/camera/ndk/impl/ACameraDevice.h
+++ b/camera/ndk/impl/ACameraDevice.h
@@ -60,6 +60,7 @@
 
     camera_status_t createCaptureSession(
             const ACaptureSessionOutputContainer*       outputs,
+            const ACaptureRequest* sessionParameters,
             const ACameraCaptureSession_stateCallbacks* callbacks,
             /*out*/ACameraCaptureSession** session);
 
@@ -139,7 +140,8 @@
     // For capture session to notify its end of life
     void notifySessionEndOfLifeLocked(ACameraCaptureSession* session);
 
-    camera_status_t configureStreamsLocked(const ACaptureSessionOutputContainer* outputs);
+    camera_status_t configureStreamsLocked(const ACaptureSessionOutputContainer* outputs,
+           const ACaptureRequest* sessionParameters);
 
     // Input message will be posted and cleared after this returns
     void postSessionMsgAndCleanup(sp<AMessage>& msg);
@@ -309,9 +311,10 @@
 
     camera_status_t createCaptureSession(
             const ACaptureSessionOutputContainer*       outputs,
+            const ACaptureRequest* sessionParameters,
             const ACameraCaptureSession_stateCallbacks* callbacks,
             /*out*/ACameraCaptureSession** session) {
-        return mDevice->createCaptureSession(outputs, callbacks, session);
+        return mDevice->createCaptureSession(outputs, sessionParameters, callbacks, session);
     }
 
     /***********************
diff --git a/camera/ndk/impl/ACameraMetadata.cpp b/camera/ndk/impl/ACameraMetadata.cpp
index 7b33c32..29ad09b 100644
--- a/camera/ndk/impl/ACameraMetadata.cpp
+++ b/camera/ndk/impl/ACameraMetadata.cpp
@@ -235,7 +235,7 @@
 }
 
 const CameraMetadata&
-ACameraMetadata::getInternalData() {
+ACameraMetadata::getInternalData() const {
     return mData;
 }
 
diff --git a/camera/ndk/impl/ACameraMetadata.h b/camera/ndk/impl/ACameraMetadata.h
index 143efc7..0fd7efa 100644
--- a/camera/ndk/impl/ACameraMetadata.h
+++ b/camera/ndk/impl/ACameraMetadata.h
@@ -64,7 +64,7 @@
     void filterUnsupportedFeatures(); // Hide features not yet supported by NDK
     void filterStreamConfigurations(); // Hide input streams, translate hal format to NDK formats
 
-    const CameraMetadata& getInternalData();
+    const CameraMetadata& getInternalData() const;
 
     template<typename INTERNAL_T, typename NDK_T>
     camera_status_t updateImpl(uint32_t tag, uint32_t count, const NDK_T* data) {
diff --git a/camera/ndk/include/camera/NdkCameraDevice.h b/camera/ndk/include/camera/NdkCameraDevice.h
index 3a6f3ef..61deb46 100644
--- a/camera/ndk/include/camera/NdkCameraDevice.h
+++ b/camera/ndk/include/camera/NdkCameraDevice.h
@@ -720,6 +720,39 @@
 camera_status_t ACaptureSessionSharedOutput_remove(ACaptureSessionOutput *output,
         ANativeWindow* anw);
 
+/**
+ * Create a new camera capture session similar to {@link ACameraDevice_createCaptureSession}. This
+ * function allows clients to pass additional session parameters during session initialization. For
+ * further information about session parameters see {@link ACAMERA_REQUEST_AVAILABLE_SESSION_KEYS}.
+ *
+ * @param device the camera device of interest.
+ * @param outputs the {@link ACaptureSessionOutputContainer} describes all output streams.
+ * @param sessionParameters An optional capture request that contains the initial values of session
+ *                          parameters advertised in
+ *                          {@link ACAMERA_REQUEST_AVAILABLE_SESSION_KEYS}.
+ * @param callbacks the {@link ACameraCaptureSession_stateCallbacks}
+ *                  capture session state callbacks.
+ * @param session the created {@link ACameraCaptureSession} will be filled here if the method call
+ *                succeeds.
+ *
+ * @return <ul>
+ *         <li>{@link ACAMERA_OK} if the method call succeeds. The created capture session will be
+ *                                filled in session argument.</li>
+ *         <li>{@link ACAMERA_ERROR_INVALID_PARAMETER} if any of device, outputs, callbacks or
+ *                                session is NULL.</li>
+ *         <li>{@link ACAMERA_ERROR_CAMERA_DISCONNECTED} if the camera device is closed.</li>
+ *         <li>{@link ACAMERA_ERROR_CAMERA_DEVICE} if the camera device encounters fatal error.</li>
+ *         <li>{@link ACAMERA_ERROR_CAMERA_SERVICE} if the camera service encounters fatal error.
+ *         </li>
+ *         <li>{@link ACAMERA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>
+ */
+camera_status_t ACameraDevice_createCaptureSessionWithSessionParameters(
+        ACameraDevice* device,
+        const ACaptureSessionOutputContainer* outputs,
+        const ACaptureRequest* sessionParameters,
+        const ACameraCaptureSession_stateCallbacks* callbacks,
+        /*out*/ACameraCaptureSession** session);
+
 #endif /* __ANDROID_API__ >= 28 */
 
 __END_DECLS
diff --git a/camera/ndk/include/camera/NdkCameraMetadataTags.h b/camera/ndk/include/camera/NdkCameraMetadataTags.h
index 4f893f1..80d460f 100644
--- a/camera/ndk/include/camera/NdkCameraMetadataTags.h
+++ b/camera/ndk/include/camera/NdkCameraMetadataTags.h
@@ -2877,6 +2877,59 @@
      */
     ACAMERA_REQUEST_AVAILABLE_CHARACTERISTICS_KEYS =            // int32[n]
             ACAMERA_REQUEST_START + 15,
+    /**
+     * <p>A subset of the available request keys that the camera device
+     * can pass as part of the capture session initialization.</p>
+     *
+     * <p>Type: int32[n]</p>
+     *
+     * <p>This tag may appear in:
+     * <ul>
+     *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
+     * </ul></p>
+     *
+     * <p>This is a subset of ACAMERA_REQUEST_AVAILABLE_REQUEST_KEYS which
+     * contains a list of keys that are difficult to apply per-frame and
+     * can result in unexpected delays when modified during the capture session
+     * lifetime. Typical examples include parameters that require a
+     * time-consuming hardware re-configuration or internal camera pipeline
+     * change. For performance reasons we advise clients to pass their initial
+     * values as part of
+     * {@link ACameraDevice_createCaptureSessionWithSessionParameters }.i
+     * Once the camera capture session is enabled it is also recommended to avoid
+     * changing them from their initial values set in
+     * {@link ACameraDevice_createCaptureSessionWithSessionParameters }.
+     * Control over session parameters can still be exerted in capture requests
+     * but clients should be aware and expect delays during their application.
+     * An example usage scenario could look like this:</p>
+     * <ul>
+     * <li>The camera client starts by quering the session parameter key list via
+     *   {@link ACameraManager_getCameraCharacteristics }.</li>
+     * <li>Before triggering the capture session create sequence, a capture request
+     *   must be built via
+     *   {@link ACameraDevice_createCaptureRequest }
+     *   using an appropriate template matching the particular use case.</li>
+     * <li>The client should go over the list of session parameters and check
+     *   whether some of the keys listed matches with the parameters that
+     *   they intend to modify as part of the first capture request.</li>
+     * <li>If there is no such match, the capture request can be  passed
+     *   unmodified to
+     *   {@link ACameraDevice_createCaptureSessionWithSessionParameters }.</li>
+     * <li>If matches do exist, the client should update the respective values
+     *   and pass the request to
+     *   {@link ACameraDevice_createCaptureSessionWithSessionParameters }.</li>
+     * <li>After the capture session initialization completes the session parameter
+     *   key list can continue to serve as reference when posting or updating
+     *   further requests. As mentioned above further changes to session
+     *   parameters should ideally be avoided, if updates are necessary
+     *   however clients could expect a delay/glitch during the
+     *   parameter switch.</li>
+     * </ul>
+     *
+     * @see ACAMERA_REQUEST_AVAILABLE_REQUEST_KEYS
+     */
+    ACAMERA_REQUEST_AVAILABLE_SESSION_KEYS =                    // int32[n]
+            ACAMERA_REQUEST_START + 16,
     ACAMERA_REQUEST_END,
 
     /**
diff --git a/camera/ndk/libcamera2ndk.map.txt b/camera/ndk/libcamera2ndk.map.txt
index 58d239b..d179aa0 100644
--- a/camera/ndk/libcamera2ndk.map.txt
+++ b/camera/ndk/libcamera2ndk.map.txt
@@ -10,6 +10,7 @@
     ACameraDevice_close;
     ACameraDevice_createCaptureRequest;
     ACameraDevice_createCaptureSession;
+    ACameraDevice_createCaptureSessionWithSessionParameters;
     ACameraDevice_getId;
     ACameraManager_create;
     ACameraManager_delete;
diff --git a/camera/tests/CameraBinderTests.cpp b/camera/tests/CameraBinderTests.cpp
index 51d9214..8fe9a86 100644
--- a/camera/tests/CameraBinderTests.cpp
+++ b/camera/tests/CameraBinderTests.cpp
@@ -476,7 +476,8 @@
         res = device->createStream(output, &streamId);
         EXPECT_TRUE(res.isOk()) << res;
         EXPECT_LE(0, streamId);
-        res = device->endConfigure(/*isConstrainedHighSpeed*/ false);
+        CameraMetadata sessionParams;
+        res = device->endConfigure(/*isConstrainedHighSpeed*/ false, sessionParams);
         EXPECT_TRUE(res.isOk()) << res;
         EXPECT_FALSE(callbacks->hadError());
 
@@ -574,7 +575,7 @@
         EXPECT_TRUE(res.isOk()) << res;
         res = device->deleteStream(streamId);
         EXPECT_TRUE(res.isOk()) << res;
-        res = device->endConfigure(/*isConstrainedHighSpeed*/ false);
+        res = device->endConfigure(/*isConstrainedHighSpeed*/ false, sessionParams);
         EXPECT_TRUE(res.isOk()) << res;
 
         sleep(/*second*/1); // allow some time for errors to show up, if any